Official SB Mathur Textbook Solutions: JEE Physics Chapter 06 Assertion Reason Type Question
Review structured textbook solutions for JEE Physics Chapter 06 Assertion Reason Type Question prepared by SB Mathur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Chapter-wise Solutions for Physics: Chapter 06 Assertion Reason Type Question
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Assertion-Reason-Type Questions - Questions 1 to 16
Assertion-Reason-Type Questions
Each question contains an assertion (Statement 1) and a reason (Statement 2). Choices: (a) Statement 1 is true, Statement 2 is true; Statement 2 is a correct explanation of Statement 1. (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. (c) Statement 1 is true, Statement 2 is false. (d) Statement 1 is false, Statement 2 is true.
Question 1. Statement 1: The formula connecting u, v and f for a spherical mirror is valid only for those mirrors whose sizes are very small compared to their radii of curvature.
Statement 2: The laws of reflection are strictly valid for plane surfaces but not for large spherical surfaces.
Solution. Answer: (c) Statement 1 is true, Statement 2 is false. The mirror formula holds for paraxial rays, so Statement 1 is true. The laws of reflection hold at every point of any surface, so Statement 2 is false.
Teacher's Note: Mirror formula needs paraxial rays; reflection laws hold for all surfaces.
Exam Note: Spot the false statement; reflection laws are universal.
Question 2. Statement 1: If the accelerating potential in an X-ray tube is increased, the wavelengths of the characteristic X-rays do not change.
Statement 2: When an electron beam strikes the target in an X-ray tube, part of the kinetic energy is converted into X-ray energy.
Solution. Answer: (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. Increasing the potential V lowers the cut-off wavelength λmin = hc/eV but does not affect the characteristic spectrum, which depends only on the target atom. Both statements are true, but Statement 2 does not explain Statement 1.
Teacher's Note: Characteristic lines depend on the target element, not on voltage.
Exam Note: Separate continuous and characteristic spectra; option (b) follows.
Question 3. Statement 1: A block of mass m starts moving on a rough horizontal surface with a velocity v. It stops due to friction between the block and the surface after moving through a certain distance. The surface is now tilted to an angle of 30° with the horizontal, and the same block is made to go up on the surface with the same initial velocity v. The decrease in mechanical energy in the second situation is smaller than that in the first situation.
Statement 2: The coefficient of friction between the block and the surface decreases with the increase in the angle of inclination.
Solution. Answer: (c) Statement 1 is true, Statement 2 is false. In the second case work is done against friction as well as gravity while moving up the incline, so less energy is lost to friction (the loss in mechanical energy equals the work done against friction), and Statement 1 is true. The coefficient of friction depends on the nature of the surfaces in contact, not on the inclination, so Statement 2 is false.
Teacher's Note: Mechanical energy lost equals friction work only; μ does not depend on angle.
Exam Note: Link energy loss to friction work; μ is angle-independent.
Question 4. Statement 1: For an elastic collision between two bodies, the relative speed of the bodies after the collision is equal to the relative speed before the collision.
Statement 2: In an elastic collision, the linear momentum of the system is conserved.
Solution. Answer: (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. For an elastic collision e = 1, so velocity of separation = velocity of approach. Linear momentum is always conserved, but this does not by itself explain Statement 1 (kinetic energy conservation does).
Teacher's Note: Elastic means e = 1; momentum alone does not give equal relative speeds.
Exam Note: Momentum is conserved in all collisions, so it cannot be the reason.
Question 5. Statement 1: A vertical iron rod has a coil of wire wound over it at the bottom end. An alternating current flows in the coil. The rod goes through a conducting ring as shown in the figure. The ring can float at a certain height above the coil. (Figure: a vertical rod with a coil wound near its bottom end and a conducting ring around the rod above the coil.)
Statement 2: In the above situation, a current is induced in the ring, which interacts with the horizontal component of the magnetic field to produce an average force in the upward direction.
Solution. Answer: (a) Statement 1 is true, Statement 2 is true; Statement 2 is a correct explanation of Statement 1. The interaction between the induced current in the ring and the horizontal component of the magnetic field produces an average upward force, which balances the weight of the ring and makes it float. Hence Statement 2 correctly explains Statement 1.
Teacher's Note: Induced ring current times horizontal field gives upward force balancing weight.
Exam Note: Name the induced current and force direction to earn the mark.
Question 6. Statement 1: If there is no external torque on a body about its centre of mass, the velocity of the centre of mass remains constant.
Statement 2: The linear momentum of an isolated system remains constant.
Solution. Answer: (d) Statement 1 is false, Statement 2 is true. Zero torque about the centre of mass means the external force passes through the centre of mass, so no rotation is produced, but the linear acceleration (and hence vCM) can still change. Statement 1 is false; Statement 2 is true.
Teacher's Note: Zero torque does not mean zero net force; vCM can change.
Exam Note: Torque and force conditions are independent; Statement 1 fails.
Question 7. Statement 1: The total translational kinetic energy of the molecules of a given mass of an ideal gas is 1.5 times the product of its pressure and its volume.
Statement 2: The molecules of a gas collide with each other and the velocities of the molecules change due to the collisions.
Solution. Answer: (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. Total translational kinetic energy = ½MCrms2 = (3/2)RT = (3/2)pV, where M is the molar mass (for one mole), so Statement 1 is true. Statement 2 is also true but does not explain it.
Teacher's Note: KEtrans = (3/2)pV from kinetic theory; collisions are irrelevant here.
Exam Note: Quote KE = (3/2)pV; collisions do not justify the factor 1.5.
Question 8. Statement 1: A piece of cloth covers a table. Some dishes are kept on it. The cloth can be pulled out without dislodging the dishes from the table.
Statement 2: For every action there is an equal and opposite reaction.
Solution. Answer: (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. This is explained by inertia of rest: the dishes stay at rest when the cloth is pulled quickly. Newton's third law is true but is not the explanation.
Teacher's Note: Inertia of rest keeps dishes in place, not action-reaction.
Exam Note: Cite inertia of rest; third law is the wrong reason.
Question 9. Statement 1: The stream of water flowing at a high speed from a garden hosepipe tends to spread like a fountain when held vertically up, but tends to narrow down when held vertically down.
Statement 2: In any steady flow of an incompressible fluid, the volume flow rate of the fluid remains constant.
Solution. Answer: (a) Statement 1 is true, Statement 2 is true; Statement 2 is a correct explanation of Statement 1. By the equation of continuity a1v1 = a2v2. For vertically upward motion the velocity decreases, so the area a increases and the stream spreads like a fountain. The same principle applies for vertically downward motion (velocity increases, area decreases).
Teacher's Note: Continuity: speed changes under gravity, so cross-section changes inversely.
Exam Note: Apply a1v1 = a2v2 for both directions.
Question 10. Statement 1: Two cylinders, one hollow (metallic) and the other solid (wooden) with the same mass and identical dimensions are simultaneously allowed to roll without stopping, down an inclined plane from the same height. The hollow cylinder will reach the bottom of the inclined plane first.
Statement 2: By the principle of conservation of energy, the total kinetic energy of both the cylinders are identical when they reach the bottom of the incline.
Solution. Answer: (d) Statement 1 is false, Statement 2 is true. The acceleration of a body rolling down an incline is a = g sin θ / (1 + K2/R2). Since asolid > ahollow, the solid cylinder reaches the bottom first, so Statement 1 is false. Kinetic energy gained equals the loss in potential energy, which is the same for both, so Statement 2 is true.
Teacher's Note: Larger K/R means smaller acceleration; solid cylinder wins the race.
Exam Note: Compare K2/R2 to decide who arrives first.
Question 11. Statement 1: An astronaut in an orbiting space station above the earth experiences weightlessness.
Statement 2: An object moving around the earth under the influence of the earth's gravitational force is in a state of free fall.
Solution. Answer: (a) Statement 1 is true, Statement 2 is true; Statement 2 is a correct explanation of Statement 1. In the orbiting (non-inertial) frame the weight mg is balanced by the pseudo-force, so the normal reaction is zero, giving apparent weightlessness. This is equivalent to free fall, so Statement 2 explains Statement 1.
Teacher's Note: Orbit is continuous free fall, so normal reaction is zero.
Exam Note: Weightlessness means zero normal reaction, not zero gravity.
Question 12. Statement 1: In a metre-bridge experiment, the null point for an unknown resistance is measured. Now, the unknown resistance is put inside an enclosure maintained at a higher temperature. The null point can be obtained at the same point as before by decreasing the value of the standard resistance.
Statement 2: Resistance of a metal increases with temperature.
Solution. Answer: (d) Statement 1 is false, Statement 2 is true. Increase in temperature increases the resistance. Hence, to keep the position of the null point unchanged, the standard resistance has to be increased, not decreased. Statement 1 is false; Statement 2 is true.
Teacher's Note: Balance needs R/S unchanged, so S must rise with R.
Exam Note: Direction of change in S is the trap.
Question 13. Statement 1: It is easier to pull a heavy object than to push it on a level ground.
Statement 2: The magnitude of frictional force depends on the nature of the two surfaces in contact.
Solution. Answer: (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. For a pull at angle θ: N = mg − F sin θ. For a push: N′ = mg + F sin θ > N, so f′ = μN′ > f = μN. Hence pull is easier than push. Statement 2 is true but is not the explanation.
Teacher's Note: Pull lowers normal reaction, push raises it; friction follows N.
Exam Note: Write N for pull and push; compare friction.
Question 14. Statement 1: For practical purposes, the earth is used as a reference at zero potential in electrical circuits.
Statement 2: The electrical potential of a sphere of radius R with charge Q uniformly distributed on the surface is given by Q/(4πε0R).
Solution. Answer: (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. Both the statements are independently true; the formula in Statement 2 does not explain why the earth is taken as zero potential.
Teacher's Note: Earth is a huge reservoir; its potential barely changes.
Exam Note: Both true; formula is not the reason for earthing.
Question 15. Statement 1: The sensitivity of a moving-coil galvanometer is increased by placing a suitable magnetic material as a core.
Statement 2: Soft iron has a high magnetic permeability and cannot be easily magnetized or demagnetized.
Solution. Answer: (c) Statement 1 is true, Statement 2 is false. A magnetic material of high permeability increases B, hence the current sensitivity (NBA/k) is increased, so Statement 1 is true. A substance with high permeability can be easily magnetised or demagnetised, so Statement 2 is false.
Teacher's Note: Soft iron has high permeability and low retentivity.
Exam Note: Soft iron magnetises and demagnetises easily; Statement 2 fails.
Question 16. Statement 1: For an observer looking out through the window of a fast-moving train, the nearby objects appear to move in the opposite direction, while the distant objects appear to be stationary.
Statement 2: If the observer and the object are moving with the velocities v1 and v2 respectively with reference to a laboratory frame, the velocity of the object vis-a-vis the observer is v2 − v1.
Solution. Answer: (b) Statement 1 is true, Statement 2 is true; Statement 2 is not a correct explanation of Statement 1. The relative displacement of a distant object with respect to the observer subtends a very small angle θ (tan θ ≈ θ = x/distance), so distant objects appear at rest. Statement 2, v2,1 = v2 − v1, is also true, but it does not explain the angular effect.
Teacher's Note: Distant objects subtend tiny angular change, so appear at rest.
Exam Note: Angular displacement, not relative velocity, explains the effect.
JEE Mathematics: SB Mathur Solutions for SB Mathur Physics Solutions Chapter 6 Assertion Reason Type Question
Download SB Mathur Solutions for JEE
Review detailed solutions for JEE Mathematics. The SB Mathur Physics Solutions Chapter 6 Assertion Reason Type Question PDF provides comprehensive answers mapped to standard SB Mathur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Detailed Calculation Guides for JEE
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the SB Mathur book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.