SB Mathur Physics Solutions Chapter 5 Linked Comprehension Type Questions Part 2

Step-by-Step SB Mathur Solutions for JEE Physics Chapter 05 Linked Comprehension Type Questions

Access comprehensive textbook solutions for Chapter 05 Linked Comprehension Type Questions using the SB Mathur reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 05 Linked Comprehension Type Questions Textbook Solutions PDF

Access the complete solution PDF for JEE Physics below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 5 Linked Comprehension Type Questions - 5.5 Ray Optics and Wave Optics (Questions 1-7) and 5.6 Modern Physics (Questions 1-13)

5.5 Ray Optics and Wave Optics

Passage 1 (metamaterials): a metamaterial has negative εr and μr, so n = c/v = −√(εrμr) is negative; the refracted ray bends to the same side of the normal as the incident ray, and the frequency of light is unchanged.

Question 5.5.1. For the light incident from air on a metamaterial, the appropriate ray diagram is: (a) refracted ray continues on the opposite side of the normal, bending towards it (ordinary refraction, with a dashed ray on the incident side); (b) refracted ray leaves along the interface, away from the normal; (c) refracted ray lies on the same side of the normal as the incident ray, bending towards the normal; (d) refracted ray on the opposite side of the normal, bending away from it.

Solution. Correct option: (c). A metamaterial has negative refractive index. Snell's law: sin θ2 = (n1/n2) sin θ1. Since n2 is negative, θ2 is negative, so the refracted ray lies on the same side of the normal as the incident ray.

Teacher's Note: Negative n flips the sign of the refraction angle, so the ray bends back to the incident side.

Exam Note: Say n2 is negative, so θ2 is negative.

Question 5.5.2. Choose the correct statement. (a) The speed of light in the metamaterial is v = c|n|. (b) The speed of light in the metamaterial is v = c/|n|. (c) The speed of light in the metamaterial is v = c. (d) The wavelength of light in the metamaterial (λm) is given by λm = λair|n|, when λair is the wavelength of light in air.

Solution. Correct option: (b). n = c/v for the metamaterial, therefore v = c/|n|.

Teacher's Note: Speed is always positive, so use the magnitude of n; frequency stays fixed.

Exam Note: Write v = c/|n| using the modulus.

Passage 2 (optical fibre): a thin glass core of index n1 is surrounded by a cladding of lower index n2 (n1 > n2). Rays with angle of incidence i less than a value im are confined by successive total internal reflections. The numerical aperture is NA = sin im.

Question 5.5.3. For the two structures, namely S1 with n1 = √45/4 and n2 = 3/2, and S2 with n1 = 8/5 and n2 = 7/5, and taking the refractive index of water to be 4/3 and that of air to be 1, choose the correct statement(s). (a) The NA of S1 immersed in water is the same as that of S2 immersed in a liquid of refractive index 16/(3√15). (b) The NA of S1 immersed in a liquid of refractive index 16/√15 is the same as that of S2 immersed in water. (c) The NA of S1 placed in air is the same as that of S2 immersed in a liquid of refractive index 4/√15. (d) The NA of S1 placed in air is the same as that of S2 placed in water.

Solution. Correct options: (a) and (c). For total internal reflection at the core–cladding surface, θ ≥ C, i.e. 90° − r ≥ C, so cos r ≥ sin C = n2/n1. Snell's law at entry: nm sin im = n1 sin r. Hence sin2 im = (n12/nm2)(1 − cos2 r) = (n12/nm2)(1 − sin2 C), so NA = sin im = √(n12 − n22)/nm. Putting in the values, the correct options are (a) and (c). (Check: for S1, √(n12 − n22) = √(45/16 − 36/16) = 3/4; for S2 it is √(64/25 − 49/25) = √15/5 ≈ 0.775. (a): (3/4)/(4/3) = 9/16 and 0.775/(16/(3√15)) = 9/16. (c): 3/4 and 0.775/(4/√15) = 3/4. (b) and (d) do not match.)

Teacher's Note: Derive NA = √(n12 − n22)/nm, then compare numerically.

Exam Note: Show the NA formula, then test each option.

Question 5.5.4. If two structures of the same cross-sectional area, but different numerical apertures NA1 and NA2 (NA2 < NA1) are joined longitudinally, the numerical aperture of the combined structure is: (a) NA1NA2/(NA1 + NA2) (b) NA1 + NA2 (c) NA1 (d) NA2

Solution. Correct option: (d). For total internal reflection to take place in both the structures, the numerical aperture should be the least one for the combined structure. Hence the correct option is (d).

Teacher's Note: A ray must be guided in both sections, so the smaller acceptance angle limits the pair.

Exam Note: State: the smaller NA governs the joined fibre.

Passage 3 (wavefronts): a surface XY separates Medium 1 and Medium 2. Lines ab and cd are plane wavefronts in Medium 1 incident on XY; lines ef and gh are the wavefronts in Medium 2 after refraction. (Figure: ab and cd are parallel straight lines inclined to XY in Medium 1; ef and gh are parallel straight lines in Medium 2, inclined at a smaller angle to XY.)

Question 5.5.5. Light travels as a (a) parallel beam in each medium (b) convergent beam in each medium (c) divergent beam in each medium (d) divergent beam in one medium and convergent beam in the other medium

Solution. Correct option: (a). The normal to the wavefront represents the direction of the rays. In both media the wavefronts are parallel, so light travels as a parallel beam in each case.

Teacher's Note: Rays are normals to wavefronts; parallel plane wavefronts mean parallel rays.

Exam Note: Link ray direction to the wavefront normal.

Question 5.5.6. The phases of the light wave at c, d, e and f are φc, φd, φe and φf respectively. It is given that φc ≠ φf. (a) φc cannot be equal to φd (b) φd can be equal to φe (c) (φd − φf) is equal to (φc − φe) (d) (φd − φc) is not equal to (φf − φe)

Solution. Correct option: (c). A wavefront is a surface of identical phase during wave propagation. Hence φc = φd and φe = φf, so φd − φf = φc − φe.

Teacher's Note: Points on one wavefront share the same phase; use that for c, d and for e, f.

Exam Note: Quote: wavefront = surface of constant phase.

Question 5.5.7. The speed of light is (a) the same in the two media (b) greater in Medium 1 than in Medium 2 (c) greater in Medium 2 than in Medium 1 (d) different at b and d

Solution. Correct option: (b). The angle between the incident wavefront (ab) and the refracting surface (XY) is the angle of incidence (θi). Similarly, θr is the angle of refraction between XY and the refracted wavefront ef. From Snell's law, n1 sin θ1 = n2 sin θ2 ⇒ (c0/c1) sin θ1 = (c0/c2) sin θ2, where the c's represent the speed of light. So sin θ1/sin θ2 = c1/c2. Since θ1 > θ2, c1 > c2. Hence the speed of light is greater in Medium 1.

Teacher's Note: Angle between wavefront and surface equals the ray angle to the normal; larger angle means faster medium.

Exam Note: Use sinθ1/sinθ2 = c1/c2.

5.6 Modern Physics

Passage 1 (rotational Bohr quantization): the Bohr quantization of angular momentum is extended to the rotation of a rigid diatomic molecule to find its quantized rotational energy.

Question 5.6.1. A diatomic molecule has moment of inertia I. By Bohr quantization condition, its rotational energy in the nth level (n = 0 is not allowed) is: (a) (1/n2)(h2/8π2I) (b) (1/n)(h2/8π2I) (c) n(h2/8π2I) (d) n2(h2/8π2I)

Solution. Correct option: (d). According to Bohr quantum condition, angular momentum L = nh/2π. Hence rotational kinetic energy = L2/2I = (nh/2π)2(1/2I) = n2h2/(8π2I).

Teacher's Note: Use E = L2/2I with L = nh/2π; energy grows as n2.

Exam Note: Write L = nh/2π first, then E = L2/2I.

Question 5.6.2. It is found that the excitation frequency from ground to the first excited state of rotation for the CO molecule is close to (4/π) × 1011 Hz. Then, the moment of inertia of CO molecule about its centre of mass is close to (take h = 2π × 10−34 J s): (a) 2.76 × 10−46 kg m2 (b) 1.87 × 10−46 kg m2 (c) 4.67 × 10−47 kg m2 (d) 1.17 × 10−47 kg m2

Solution. Correct option: (b). Rotational KE for the nth state is En = n2h2/(8π2I). For excitation from n = 1 to n = 2: hν = (4h/π) × 1011 = (22 − 12)h2/(8π2I). Simplifying, I = (3h/8π)(10−11/4) kg m2 = 1.87 × 10−46 kg m2. (Check: with h = 2π × 10−34, 3h/8π = 0.75 × 10−34, times 0.25 × 10−11 = 1.875 × 10−46.)

Teacher's Note: Equate photon energy hν to E2 − E1 = 3h2/(8π2I).

Exam Note: Show the energy gap, then solve for I.

Question 5.6.3. In a CO molecule, the distance between C (mass = 12 amu) and O (mass = 16 amu), where 1 amu = (5/3) × 10−27 kg, is close to: (a) 2.4 × 10−10 m (b) 1.9 × 10−10 m (c) 1.3 × 10−10 m (d) 4.4 × 10−11 m

Solution. Correct option: (c). Moment of inertia I = [m1m2/(m1 + m2)] r2, so r = √[I(m1 + m2)/(m1m2)] = √[(1.87 × 10−46 kg m2)(28 amu)/((12 amu)(16 amu))] = √[(1.87 × 10−46)(28)/((12 × 16) × (5/3) × 10−27)] m = 1.3 × 10−10 m. (Check: 28/(192 × 1.667 × 10−27) = 8.75 × 1025; times 1.87 × 10−46 = 1.64 × 10−20; square root = 1.28 × 10−10 m.)

Teacher's Note: Rigid rotor about the centre of mass: I = μr2 with reduced mass μ.

Exam Note: Use reduced mass; convert amu to kg.

Passage 2 (β-decay): n → p + e− + antineutrino, with the neutron at rest and the antineutrino taken as massless with negligible energy. The maximum kinetic energy of the electron is 0.8 × 106 eV. The kinetic energy of the proton is only the recoil energy.

Question 5.6.4. If the antinutrino had a mass 3 eV/c2 (where c is the speed of light) instead of zero mass, what should be the range of the kinetic energy, K, of the electron? (a) 0 ≤ K ≤ 0.8 × 106 eV (b) 3.0 eV ≤ K ≤ 0.8 × 106 eV (c) 2.0 eV ≤ K ≤ 0.8 × 106 eV (d) 0 ≤ K ≤ 0.8 × 106 eV (as printed in the scan, options (a) and (d) look the same; the book's key gives (d), and the working below gives 0 ≤ KE < Q)

Solution. Correct option: (d). 0 ≤ (KE)β− ≤ Q − (KE)p − (KE)ν̄, so 0 ≤ (KE)β− < Q.

Teacher's Note: Energy shared with proton and antineutrino means the electron's KE cannot reach Q.

Exam Note: Write the energy balance, then bound the electron KE.

Question 5.6.5. What is the maximum energy of the antineutrino? (a) Zero (b) Much less than 0.8 × 106 eV (c) Nearly 0.8 × 106 eV (d) Much larger than 0.8 × 106 eV

Solution. Correct option: (c). Q = 0.8 × 106 eV and (KE)p + (KE)β− + (KE)ν̄ = Q. (KE)p is nearly zero when (KE)β− is zero. So (KE)ν̄ = Q − (KE)p ≈ Q (≈ 0.8 × 106 eV).

Teacher's Note: Antineutrino is maximum when the electron has almost no energy and the proton recoil is tiny.

Exam Note: Use conservation of energy with the electron KE near zero.

Passage 3 (binding energy): masses of some neutral atoms: 11H 1.007825 u; 21H 2.014102 u; 31H 3.016050 u; 42He 4.002603 u; 63Li 6.015123 u; 73Li 7.016004 u; 7030Zn 69.925325 u; 8234Se 81.916709 u; 15264Gd 151.919803 u; 20682Pb 205.974455 u; 20983Bi 208.980388 u; 21084Po 209.982876 u. A heavy nucleus of mass M can break into lighter nuclei m1, m2 only if (m1 + m2) < M; light nuclei m3, m4 can fuse into M′ only if (m3 + m4) > M′.

Question 5.6.6. Which of the following statements is correct? (a) The nucleus 63Li can emit an alpha particle. (b) The nucleus 21084Po can emit a proton. (c) Deuterons and alpha particles can undergo complete fusion. (d) The nuclei 7030Zn and 8234Se can undergo complete fusion.

Solution. Correct option: (c). For 63Li → 42He + 21H: Q/c2 = 6.015123 − 4.002603 − 2.014102 = −0.001582 < 0, so alpha emission is not possible. (The book prints 6.01523, a typographical slip; the result is the same.) For 21084Po → 11H + 20983Bi: Q/c2 = 209.982876 − 1.007825 − 208.980388 = −0.005337 < 0, not possible. For 21H + 42He → 63Li: Q/c2 = 2.014102 + 4.002603 − 6.015123 > 0, so this fusion is possible [option (c)]. For 7030Zn + 8234Se → 15264Gd: Q/c2 = 69.925325 + 81.916709 − 151.919803 = −0.077769 < 0, not possible. Corrected: the book prints 0.001627 for the third mass difference; the correct value is 0.001582 u (still positive, so the answer (c) is unchanged). (The book also writes Ze and Ge for Zn and Gd in the last reaction.)

Teacher's Note: Reaction is allowed only if the mass decreases, i.e. Q = (minitial − mfinal)c2 > 0.

Exam Note: Compute Q/c2 for each option; keep only the positive one.

Question 5.6.7. The kinetic energy (in keV) of the alpha particle released when the nucleus 21084Po at rest undergoes alpha decay is: (a) 5319 (b) 5422 (c) 5707 (d) 5818

Solution. Correct option: (a). For 21084Po → 42He + 20682Pb, Q = (209.982876 − 4.002603 − 205.974455)c2 = 5.422 MeV. Conserving linear momentum, √(2K1(4)) = √(2K2(206)), so 4K1 = 206K2 and K1 = (103/2)K2. But K1 + K2 = 5.422 MeV ⇒ K1 + (2/103)K1 = 5.422 MeV ⇒ (105/103)K1 = 5.422 MeV ⇒ K1 = 5.319 MeV = 5319 keV.

Teacher's Note: Equal and opposite momenta share Q in the inverse ratio of masses.

Exam Note: Find Q first, then split by momentum conservation.

Passage 4 (particle in a box): a particle moves along the x-axis between x = 0 and x = a (a of nanometre dimension). Its allowed energies correspond to standing waves with nodes at x = 0 and x = a; n = 1, 2, 3, ... is the number of loops. E = p2/2m. Take h = 6.6 × 10−34 J s and e = 1.6 × 10−19 C. (Figure: standing waves with n loops between x = 0 and x = a.)

Question 5.6.8. The allowed energy of the particle for a particular value of n is proportional to: (a) a−2 (b) a−3/2 (c) a−1 (d) a2

Solution. Correct option: (a). If n segments are contained in length a, then a = n(λ/2), so λ = 2a/n = h/p and the linear momentum is p = nh/2a. Kinetic energy E = p2/2m = n2h2/(8ma2). Therefore E ∝ a−2.

Teacher's Note: Fit n half-wavelengths in the box, then use de Broglie and E = p2/2m.

Exam Note: Start from a = nλ/2; end with E ∝ 1/a2.

Question 5.6.9. If the mass of the particle is m = 1.0 × 10−30 kg and a = 6.6 nm, the energy of the particle in its ground state is closest to: (a) 0.8 meV (b) 8 meV (c) 80 meV (d) 800 meV

Solution. Correct option: (b). For the ground state, n = 1: E1 = h2/(8ma2) = (6.6 × 10−34 J s)2/[8(1 × 10−30 kg)(6.6 × 10−9 m)2] = 0.125 × 10−20 J = (0.125 × 10−20/e) eV ≈ 8 meV. (Check: 1.25 × 10−21 J / 1.6 × 10−19 = 7.8 meV.)

Teacher's Note: Use E1 = h2/8ma2, then divide by e to get eV.

Exam Note: Convert nm to m and J to eV carefully.

Question 5.6.10. The speed of the particle that can take discrete values, is proportional to: (a) n−3/2 (b) n−1 (c) n1/2 (d) n

Solution. Correct option: (d). Since p = mv = nh/2a, velocity v = nh/(2ma). Therefore v ∝ n.

Teacher's Note: From p = nh/2a, speed is directly proportional to n.

Exam Note: Write p = mv = nh/2a, then read off v ∝ n.

Passage 5 (nuclear fusion): deuterium nuclei 21H (D) are candidates for fusion: D + D → 32He + n + energy. In the reactor core a fully ionized gas of deuteron nuclei and electrons (plasma) is confined for a time t0. If n is the number density, nt0 is the Lawson number; a reaction is successful if the Lawson number exceeds 5 × 1014 s cm−3. Useful: Boltzmann constant k = 8.6 × 10−5 eV K−1; e2/(4πε0) = 1.44 × 10−9 eV m.

Question 5.6.11. In the core of a nuclear fusion reactor, the gas becomes plasma because of the: (a) strong nuclear force acting between the deuterons (b) Coulomb force acting between the deuterons (c) Coulomb force acting between the deuteron–electron pair (d) high temperature

Solution. Correct option: (d). Fusion is a nuclear reaction (as in the sun) which requires a very high temperature; at that temperature the gas is fully ionized.

Teacher's Note: Thermal energy at very high temperature strips electrons from nuclei, forming plasma.

Exam Note: Answer: high temperature ionizes the gas.

Question 5.6.12. Assume that two deuteron nuclei in the core of a fusion reactor at temperature T are moving towards each other, each with a kinetic energy 1.5 kT, when the separation between them is large enough to neglect Coulomb potential energy. Also, neglect any interaction with other particles in the core. The minimum temperature T required for them to reach a separation of 4 × 10−15 m is in the range: (a) 1.0 × 109 K < T < 2.0 × 109 K (b) 2.0 × 109 K < T < 3.0 × 109 K (c) 3.0 × 109 K < T < 4.0 × 109 K (d) 4.0 × 109 K < T < 5.0 × 109 K

Solution. Correct option: (a). Total kinetic energy of the two deuterons = 2(3/2 kT) = (1/4πε0)(e2/d). Solving, T = 1.4 × 109 K, which lies in the range 1.0 × 109 K < T < 2.0 × 109 K. (Check: 3kT = 1.44 × 10−9 eV m / 4 × 10−15 m = 3.6 × 105 eV, so T = 3.6 × 105/(3 × 8.6 × 10−5) = 1.40 × 109 K.)

Teacher's Note: Both nuclei's kinetic energy turns into Coulomb potential energy at closest approach.

Exam Note: Equate 2(3/2)kT to e2/4πε0d.

Question 5.6.13. The results of calculations for four different designs of a fusion reactor using D–D reaction are given below. Which of these is the most promising based on Lawson criterion? (a) Deuteron density = 2.0 × 1012 cm−3, confinement time = 5.0 × 10−3 s (b) Deuteron density = 8.0 × 1014 cm−3, confinement time = 9.0 × 10−1 s (c) Deuteron density = 4.0 × 1023 cm−3, confinement time = 1.0 × 10−11 s (d) Deuteron density = 1.0 × 1024 cm−3, confinement time = 4.0 × 10−12 s

Solution. Correct option: (b). As given, the Lawson number nt0 > 5 × 1014 s cm−3. The deuteron density n = 8 × 1014 cm−3 and the confinement time t0 = 9 × 10−1 s satisfy the requirement. (Check: nt0 = 1 × 1010, 7.2 × 1014, 4 × 1012, 4 × 1012 for (a) to (d); only (b) exceeds 5 × 1014.)

Teacher's Note: Compute n×t0 for each design and compare with 5 × 1014.

Exam Note: Multiply n by t0 for every option.

SB Mathur Solutions for JEE Mathematics: SB Mathur Physics Solutions Chapter 5 Linked Comprehension Type Questions Part 2

Chapter-wise SB Mathur Solutions: SB Mathur Physics Solutions Chapter 5 Linked Comprehension Type Questions Part 2

Access the complete chapter-wise PDF for SB Mathur Physics Solutions Chapter 5 Linked Comprehension Type Questions Part 2. These structured SB Mathur Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Mastering Core Concepts with SB Mathur Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your JEE Exam Preparation

In addition to these SB Mathur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these SB Mathur Solutions for JEE Physics?

They are chapter-wise solved questions from the SB Mathur book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the SB Mathur JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these SB Mathur solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising SB Mathur JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.