Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 8 Equilibrium Ii Part 3

Pradeep's KL Gogia Solutions for Class 11 Chemistry: Chapter 08 Equilibrium Ii

Review structured textbook solutions for Class 11 Chemistry Chapter 08 Equilibrium Ii prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice Class 11 Chemistry Solutions: Chapter 08 Equilibrium Ii

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Equilibrium II (Ionic Equilibrium in Solutions) - Pages 8/63 to 8/92

Conceptual Questions

Question 6. Why PO43− ion is not amphiprotic?

Solution.

An amphiprotic ion is one which can donate proton as well as accept proton. PO43− ion can accept proton(s) but cannot donate any proton. Hence PO43− is not amphiprotic.

Teacher's Note: Amphiprotic species need both a removable H and a lone pair; phosphate has no H left.

Exam Note: Say: can accept H+ but cannot donate.

Question 7. In the reaction between BF3 and C2H5OC2H5 which one of them will act as an acid? Justify your answer.

Solution.

The reaction is (C2H5)2O: + BF3 → (C2H5)2O→BF3 (the oxygen of the ether donates a lone pair to boron, forming a coordinate bond).

As BF3 accepts a pair of electrons, hence BF3 is the Lewis acid.

Teacher's Note: Boron in BF3 has an incomplete octet, so it accepts the ether oxygen's lone pair.

Exam Note: Lewis acid = electron-pair acceptor; show the dative bond.

Question 8. Give reason in one or two sentences for the following: Ammonium chloride is acidic in liquid ammonia solvent.

Solution.

In solution of NH4Cl in liquid NH3, the following reaction takes place: NH4+ + NH3 ⇌ NH3 + NH4+. Thus NH4Cl gives proton. Hence it is acidic.

Teacher's Note: In the solvent-system concept, an acid raises the cation of the solvent (NH4+).

Exam Note: State: NH4+ donates a proton.

Question 9. Arrange the following in order of their increasing basicity: H2O, OH−, CH3OH, CH3O−

Solution.

H2O < CH3OH < OH− < CH3O−

Teacher's Note: Anions are stronger bases than neutral molecules; the methyl group makes CH3O− richer in electrons.

Exam Note: Neutral < anion; alkoxide beats hydroxide.

Question 10. The following can act as both Bronsted acid and Bronsted base. Write the formula in each case (of the product): (i) HCO3− (ii) H2PO4− (iii) NH3 (iv) HS−

Solution.

(i) CO32−, H2CO3

(ii) HPO42−, H3PO4

(iii) NH2−, NH4+

(iv) S2−, H2S.

(In each pair the first is the product when the species acts as an acid, the second when it acts as a base.)

Teacher's Note: Losing H+ gives the conjugate base; gaining H+ gives the conjugate acid.

Exam Note: Give both products for each species.

Question 11. NaCl solution is added to a saturated solution of PbCl2. What will happen to the concentration of Pb2+ ions?

Solution.

Pb2+ ion concentration will decrease to keep Ksp constant.

Teacher's Note: Common-ion effect: extra Cl− pushes the equilibrium back, precipitating PbCl2.

Exam Note: Link to constant Ksp = [Pb2+][Cl−]2.

Question 12. Which is a stronger base in each of the following pairs and why? (i) H2O, Cl− (ii) CH3COO−, OH−

Solution.

(i) H2O

(ii) OH−.

Refer to Bronsted-Lowry concept for relative strengths.

Teacher's Note: Cl− is conjugate base of the strong acid HCl; OH− of the very weak H2O.

Exam Note: Stronger the acid, weaker its conjugate base.

Question 13. Between Na+ and Ag+ which is stronger Lewis acid and why?

Solution.

Ag+. This is because Ag+ has a pseudo noble gas configuration which makes it more polarizing.

Teacher's Note: Ag+ has a pseudo-inert (18-electron) core that shields poorly, so it polarises and accepts pairs more strongly.

Exam Note: Name Ag+; give the pseudo noble gas reason.

Question 14. Anhydrous AlCl3 is covalent. From the data given below, predict whether it would remain covalent or become ionic in aqueous solution (Ionization energy for Al = 5137 kJ mol−1, ΔHhydration for Al3+ = −4665 kJ mol−1, ΔHhydration for Cl− = −381 kJ mol−1).

Solution.

Total energy released due to hydration of ions = −4665 − 3 × 381 = −5808 kJ mol−1. This energy is greater than the ionisation energy of Al which is 5137 kJ mol−1. Hence it would be ionic in the solution.

Teacher's Note: Ionisation is affordable only if hydration energy exceeds the ionisation energy: 5808 > 5137.

Exam Note: Total hydration of Al3+ plus 3Cl−; then compare.

Question 15. Classify the following species as Lewis acids and Lewis bases: NH3, BF3, SnCl4, C5H5N, CO, Ni2+

Solution.

Lewis acids: BF3, SnCl4, Ni2+

Lewis bases: NH3, C5H5N, CO.

Teacher's Note: Electron-deficient species and cations accept pairs; N and C lone-pair holders donate.

Exam Note: Acids accept pairs, bases donate pairs.

Question 16. Give reasons for the following: (i) The solubility of calcium acetate decreases while that of lead nitrate increases with increase in temperature. (ii) Magnesium is not precipitated from a solution of its salt by NH4OH in the presence of NH4Cl.

Solution.

(i) This is explained on the basis of Le Chatelier principle. Dissolution of lead nitrate is endothermic while that of calcium acetate is exothermic i.e.

Pb(NO3)2 + aq ⇌ Pb(NO3)2(aq) − Heat

CaAc2 + 2H2O → Ca(OH)2 + 2CH3COOH; Ca(OH)2 + aq ⇌ Ca(OH)2(aq) + Heat.

(ii) The solubility product of Mg(OH)2 is high. Presence of NH4Cl suppresses the dissociation of NH4OH due to common ion effect thus giving low concentration of [OH−]. The ionic product, therefore, cannot exceed the solubility product.

Teacher's Note: Heating favours the endothermic direction (Le Chatelier); common ion lowers [OH−] below Mg(OH)2 Ksp.

Exam Note: Name Le Chatelier and common-ion effect; compare ionic product with Ksp.

Question 17. Explain why pH of 0.1 molar solution of acetic acid will be higher than that of 0.1 molar solution of HCl?

Solution.

Acetic acid is a weak electrolyte. It is not completely ionized and hence gives less H+ ion concentration. HCl is a strong acid. It is completely ionized giving more H+ ion concentration. pH = − log [H+]; less the [H+], greater will be the pH.

Teacher's Note: Weak acid ionises partly so [H+] is lower; pH = −log[H+] is therefore higher.

Exam Note: Compare degrees of ionisation, then use pH definition.

Question 18. Will the pH of water be same at 4°C and 25°C? Explain.

Solution.

No, pH of water is not same at 4°C and 25°C. This is because with increase in temperature, dissociation of H2O molecules increases. Hence [H+] will increase i.e. pH decreases. Thus pH at 4°C will be more than at 25°C.

Teacher's Note: Ionisation of water is endothermic, so Kw rises with temperature and pH falls.

Exam Note: Answer No; link Kw to temperature.

Question 19. What type of salts are Na2HPO3 and NaHS?

Solution.

Na2HPO3 is obtained by reaction between NaOH and H3PO3 (a dibasic acid). In H3PO3 the phosphorus carries one H directly attached (P–H), one P=O and two P–OH groups.

Both displaceable hydrogens are replaced by Na. No acidic hydrogen is left. Hence Na2HPO3 is a normal salt. NaHS is obtained by replacement of one acidic hydrogen of H2S by Na (on reaction with NaOH). Hence NaHS is an acidic salt.

Teacher's Note: H3PO3 is dibasic: only the two O–H hydrogens are acidic, the P–H is not.

Exam Note: Normal vs acidic: count replaceable H atoms.

Question 20. Classify the following as acid or base according to Bronsted-Lowry theory and name their corresponding conjugate base or acid: (i) NH3 (ii) CH3COO− (iii) H3O+ (iv) H− (v) HOO− (vi) S2O82−

Solution.

According to Bronsted-Lowry theory, an acid is a substance which can donate a proton while base is a substance which can accept a proton.

(i) NH3 is a Bronsted base (NH3 + H+ → NH4+). Its conjugate acid is NH4+.

(ii) CH3COO− is a Bronsted base (CH3COO− + H+ → CH3COOH). Its conjugate acid is CH3COOH.

(iii) H3O+ is a Bronsted acid (H3O+ → H2O + H+). Its conjugate base is H2O.

(iv) H− is a Bronsted base (H− + H+ → H2 in the reaction H− + H2O ⇌ H2 + OH−). Its conjugate acid is H2.

(v) HOO− is a Bronsted acid (HOO− → O22− + H+ in the reaction HOO− + H2O → O22− + H3O+). Its conjugate acid is O22− (peroxide ion).

(vi) S2O82− is a Bronsted base (S2O82− + 2H+ → 2HSO4− in the reaction S2O82− + 2H2O ⇌ 2HSO4− + OH−). Its conjugate acid is HSO4−.

Corrected: in (v), the conjugate species of the acid HOO− is its conjugate base O22− (the book says "conjugate acid").

Teacher's Note: Acid donates H+, base accepts; the conjugate partner differs by exactly one proton.

Exam Note: Write the proton-transfer equation for each part.

Question 21. Prove that the degree of dissociation of a weak monoprotic acid is given by α = 1/(1 + 10(pKa−pH)), where Ka is the dissociation constant of the acid.

Solution.

Suppose we start with C mol L−1 of the weak monoprotic acid HA. Then HA ⇌ H+ + A−

HAH+A−
Initial molar conc.C00
Molar conc. after dissociationC − Cα = C(1 − α)CαCα

Thus Ka = Cα·Cα / C(1 − α) = Cα2/(1 − α) ...(i)

Also [H+] = Cα ...(ii)

Substituting the value of C from eqn. (i), we get [H+] = Ka(1 − α)/α (from (ii) with C = Ka(1 − α)/α2)

∴ −log[H+] = −[log Ka + log(1 − α) − log α]

or pH = pKa − log(1 − α) + log α

or log[(1 − α)/α] = pKa − pH

or (1 − α)/α = 10pKa−pH

or 1/α − 1 = 10pKa−pH

or 1/α = 1 + 10pKa−pH

or α = 1/(1 + 10pKa−pH)

Teacher's Note: Combine Ka = Cα2/(1−α) with [H+] = Cα, eliminate C, take negative logs.

Exam Note: Derivation marks: Ka expression, elimination of C, log step.

Question 23. Arrange the following compounds in the decreasing order of basicity on the basis of Bronsted-Lowry concept: BaO, CO2, SO3, B2O3, Cl2O7.

Solution.

BaO + H2O ⇌ Ba(OH)2 (Basic)

CO2 + H2O ⇌ H2CO3 (Weakly acidic)

SO3 + H2O ⇌ H2SO4 (Strongly acidic)

B2O3 + 3H2O ⇌ 2H3BO3 (Very weakly acidic)

Cl2O7 + H2O ⇌ 2HClO4 (Very strongly acidic)

Hence in the decreasing order of basicity, we have BaO > B2O3 > CO2 > SO3 > Cl2O7.

Teacher's Note: Oxide basicity is the reverse of the strength of the acid its hydrate forms.

Exam Note: Write each hydrate and its acid strength first.

B. Problems

Question Problem 1. Calculate the degree of dissociation of 0.5 M NH3 at 25°C in a solution of pH = 12.

Solution.

NH4OH ⇌ NH4+ + OH−; initial C mol L−1, 0, 0; after dissociation C − Cα, Cα, Cα.

pH = 12 means [H+] = 10−12 or [OH−] = 10−2

∴ [OH−] = Cα = 10−2 or α = 10−2/C = 10−2/0.5 = 2 × 10−2 or 2%.

Teacher's Note: pH gives pOH, hence [OH−] = Cα; divide by the concentration.

Exam Note: Convert pH to [OH−] first.

Question Problem 2. Calculate the ratio of pH of a solution containing 1 mole of CH3COONa + 1 mole of HCl per litre to that of a solution containing 1 mole of CH3COONa + 1 mole of CH3COOH per litre.

Solution.

Case I. CH3COONa + HCl → CH3COOH + NaCl. Initial 1 mole, 1 mole, 0, 0; after reaction 0, 0, 1, 1. i.e. [CH3COOH] = 1 mol L−1.

CH3COOH ⇌ CH3COO− + H+; [H+] = Cα but α = √(Ka/C), so [H+] = C√(Ka/C) = √(KaC) = √Ka = Ka1/2 (as C = 1 mol L−1).

∴ (pH)1 = −½ log Ka ...(i)

Case II. Applying Henderson equation (pH)2 = pKa + log([Salt]/[Acid]) = pKa = −log Ka ...(ii) (since [Salt] = [Acid] = 1 mol L−1)

From equations (i) and (ii), (pH)1/(pH)2 = 1/2.

Teacher's Note: HCl converts the salt to weak acid (pH = ½pKa); equal salt and acid is a buffer (pH = pKa).

Exam Note: Spot case I as weak acid, case II as buffer.

Question Problem 3. 0.1 M CH3COOH (pH = 3) is titrated with 0.05 M NaOH solution. Calculate the pH when (i) 1/4th of the acid has been neutralized. (ii) 3/4th of the acid has been neutralized.

Solution.

Dissociation constant of the acid. CH3COOH ⇌ CH3COO− + H+. As pH = 3, [H+] = 10−3 M, [CH3COO−] = [H+] = 10−3 M. Ka = (10−3 × 10−3)/0.1 = 10−5.

(i) When 1/4th of the acid has been neutralized: CH3COOH + NaOH → CH3COONa + H2O. Initial conc. 0.1 M. After 1/4th neutralization: acid = 0.1 × 3/4 = 0.075 M, salt = 0.1 × 1/4 = 0.025 M.

∴ pH = pKa + log([Salt]/[Acid]) = −log 10−5 + log(0.025/0.075) = 5 − 0.4771 = 4.5229

(ii) When 3/4th of the acid has been neutralized: acid = 0.1 × 1/4 = 0.025 M, salt = 0.1 × 3/4 = 0.075 M.

∴ pH = −log 10−5 + log(0.075/0.025) = 5 + 0.4771 = 5.4771

Teacher's Note: Partial neutralisation makes an acid-salt buffer; apply Henderson with the remaining acid and formed salt.

Exam Note: Find Ka from the given pH first.

Question Problem 4. A sample of hard water contains 100 ppm of CaSO4. What minimum fraction of water should be evaporated off so that solid CaSO4 begins to separate out? Ksp for CaSO4 is 9.0 × 10−6.

Solution.

Maximum solubility of CaSO4 in water: S = √Ksp = √(9.0 × 10−6) = 3.0 × 10−3 mol L−1.

Suppose the volume of water taken = V litre. As CaSO4 present is 100 ppm i.e. 100 g per 106 g of water, CaSO4 present in V litres (V × 103 g) of water = (100/106) × V × 103 g = 0.1 V g = 0.1V/136 moles (molar mass of CaSO4 = 136 g mol−1).

After evaporation, suppose volume of water left = V′ litre. Thus V′ litre of water now contains 0.1V/136 moles of CaSO4. This should be equal to the maximum solubility in moles L−1.

∴ (0.1V/136) × (1/V′) = 3.0 × 10−3 or V′ = 0.1V/(136 × 3 × 10−3) = 0.245 V

∴ Volume of water evaporated = V − V′ = V − 0.245V = 0.755 V i.e. 75.5% of water should be evaporated off.

Teacher's Note: Precipitation starts when the concentration reaches solubility; concentrate the CaSO4 from 0.00074 M to 0.003 M.

Exam Note: Compute S from Ksp, then ratio of volumes.

Question Problem 5. A buffer solution with pH 9 is to be prepared by mixing NH4Cl and NH4OH. Calculate the number of moles of NH4Cl that should be added to one litre of 1.0 M NH4OH (Kb = 1.8 × 10−5).

Solution.

For a basic buffer pOH = pKb + log([Salt]/[Base]). Further pH + pOH = 14 so that pOH = 14 − 9 = 5. pKb = −log(1.8 × 10−5) = 4.7447. [Base] = [NH4OH] = 1 mol L−1.

∴ 5 = 4.7447 + log([Salt]/1) or log[Salt] = 0.2553 or [Salt] = 1.8 mol L−1

Teacher's Note: Basic buffer: use pOH = pKb + log(salt/base) with pOH = 14 − pH.

Exam Note: Convert pH to pOH before using the buffer formula.

Question Problem 6. Calculate the amount of (NH4)2SO4 in g which must be added to 500 mL of 0.2 M NH3 to yield a solution of pH = 9.35. Kb for NH3 = 1.78 × 10−5.

Solution.

As it is a basic buffer, pOH = pKb + log([Salt]/[Base]) = −log Kb + log([NH4+]/[NH4OH]).

As pH = 9.35, ∴ pOH = 14 − 9.35 = 4.65. Milli moles of NH4OH in solution = 0.2 × 500 = 100. Suppose milli moles of NH4+ to be added = x.

∴ 4.65 = −log(1.78 × 10−5) + log[(x/500)/(100/500)] = (5 − 0.2504) + log(x/100)

or log(x/100) = −0.0996, so x = 100 × 10−0.0996 = 79.5 milli moles of NH4+.

(1 millimole of (NH4)2SO4 = 2 millimoles of NH4+) ∴ Milli moles of (NH4)2SO4 to be added = 79.5/2 = 39.75.

Mass of (NH4)2SO4 = 39.75 × 10−3 mol × 132 g mol−1 = 5.25 g (approx.).

Corrected: the book writes log(x/100) = −0.0996 ≈ 1̄.0004 and obtains x = 125.9 millimoles and 8.3094 g, which is arithmetically wrong. The correct value is x = 79.5 millimoles, i.e. about 5.25 g.

Teacher's Note: Each (NH4)2SO4 supplies two NH4+, so halve the millimoles of ammonium ion needed.

Exam Note: Use pOH form; divide NH4+ moles by 2.

Question Problem 7. Given that the solubility product of radium sulphate (RaSO4) is 4 × 10−11. Calculate the solubility in (a) pure water (b) 0.10 M Na2SO4.

Solution.

(a) Suppose the solubility of RaSO4 in water = x mol L−1. Then RaSO4 ⇌ Ra2+ + SO42−, each x mol L−1. Ksp = [Ra2+][SO42−] = x × x = x2, or x2 = 4 × 10−11, x = 6.32 × 10−6 mol L−1.

(b) Na2SO4 → 2Na+ + SO42−. As [Na2SO4] = 0.10 M, [SO42−] from Na2SO4 = 0.10 M. Total [SO42−] = x + 0.1 ≈ 0.1 M. Hence Ksp = [Ra2+][SO42−]; 4 × 10−11 = [Ra2+] [0.1] or [Ra2+] = 4 × 10−10 mol L−1.

∴ Solubility of RaSO4 in 0.1 M Na2SO4 = 4 × 10−10 mol L−1

Corrected: the book prints x = 6.66 × 10−6 mol L−1 in (a); √(4 × 10−11) = 6.32 × 10−6. Part (b) is unaffected.

Teacher's Note: The common ion SO42− cuts solubility by roughly 104 times; ignore x beside 0.1.

Exam Note: Show both Ksp substitutions; state common-ion effect.

Question Problem 8. Calculate the simultaneous solubility of AgSCN and AgBr. Ksp for AgSCN and AgBr are 1.0 × 10−12 and 5.0 × 10−13 respectively.

Solution.

Suppose the simultaneous solubilities of AgSCN and AgBr are x and y moles L−1. Then AgSCN → Ag+ + SCN− and AgBr → Ag+ + Br−.

∴ Total [Ag+] = x + y, [SCN−] = x, [Br−] = y.

Ksp for AgSCN = [Ag+][SCN−] = (x + y)x = 1.0 × 10−12 ...(i)

Ksp for AgBr = [Ag+][Br−] = (x + y)y = 5.0 × 10−13 ...(ii)

Dividing (ii) by (i), y/x = 0.5 or y = 0.5x. Putting in (i): (x + 0.5x)x = 10−12 or 1.5x2 = 10−12, x2 = 0.667 × 10−12, x = 0.82 × 10−6 mol L−1.

∴ y = 0.5x = 0.41 × 10−6 mol L−1

Solubility of AgSCN = 0.82 × 10−6 mol L−1; solubility of AgBr = 0.41 × 10−6 mol L−1

Teacher's Note: Both salts share Ag+, so the total [Ag+] = x + y appears in both Ksp expressions.

Exam Note: Divide the two Ksp equations to get y/x.

Question Problem 9. Calculate the hydrolysis constant of the salt containing NO2− ions. (Given Ka for HNO2 = 4.5 × 10−10).

Solution.

For the salt containing NO2− ion (i.e. salt of weak acid) Kh = Kw/Ka = 10−14/(4.5 × 10−10) = 2.2 × 10−5.

Teacher's Note: Salt of a weak acid hydrolyses as a base: Kh = Kw/Ka.

Exam Note: Quote Kh = Kw/Ka then substitute.

Question Problem 10. Calculate the degree of hydrolysis of a 0.01 M solution of KCN, Ka for HCN is 6.2 × 10−10.

Solution.

h = √(Kw/(Kac)) = √(10−14/(6.2 × 10−10 × 10−2)) = 0.04 = 4%.

Teacher's Note: KCN is a weak-acid/strong-base salt; h = √(Kh/c) with Kh = Kw/Ka.

Exam Note: Use h = √(Kw/Kac).

Question Problem 11. Ksp of Al(OH)3 at 25°C is 5 × 10−33. Calculate the solubility of Al(OH)3 in moles/litre at 25°C.

Solution.

Suppose the solubility of Al(OH)3 = s moles litre−1. Al(OH)3 ⇌ Al3+ + 3OH− (s, 3s).

Ksp = s × (3s)3 = 27s4 = 5 × 10−33, or s4 = (5/27) × 10−33

or 4 log s = log 5 − log 27 − 33 = 0.6990 − 1.4314 − 33 = −33.7324, log s = −8.4331, s = 3.689 × 10−9 M.

Teacher's Note: For A(OH)3 type salts Ksp = 27s4; take the fourth root.

Exam Note: Write Ksp = 27s4 before solving.

Question Problem 12. pH = 7.40, K1 of H2CO3 = 4.5 × 10−7. What will be the ratio of [HCO3−] to [H2CO3]?

Solution.

H2CO3 ⇌ H+ + HCO3−; K1 = [H+][HCO3−]/[H2CO3]

∴ [HCO3−]/[H2CO3] = K1/[H+]

pH = 7.40 means −log[H+] = 7.4, log[H+] = −7.4 = 8̄.6, [H+] = 3981 × 10−8 (i.e. 3.981 × 10−8)

∴ [HCO3−]/[H2CO3] = 4.5 × 10−7/(3.981 × 10−8) = 11.3.

Teacher's Note: The ratio of conjugate base to acid is K1/[H+]; blood buffer is mostly bicarbonate.

Exam Note: Rearrange K1 expression; convert pH to [H+].

I.I.T. (Mains) Special

Question I.I.T. Special Problem 1. The pH of pure water at 25°C and 35°C are 7 and 6 respectively. Calculate the heat of dissociation of H2O into H+ and OH− ions.

Solution.

The reaction is H2O ⇌ H+ + OH−. At 25°C, pH = 7 means [H+] = 10−7 M, ∴ Kw = 10−14. At 35°C, pH = 6 means [H+] = 10−6 M, ∴ Kw = 10−12.

As equilibrium constants for the dissociation of H2O are in the same ratio as ionic products of water, we can apply the relation

log(Kw2/Kw1) = (ΔH/2.303R)(1/T1 − 1/T2)

∴ log(10−12/10−14) = ΔH/(2.303 × 8.314 J K−1 mol−1) × (1/298 K − 1/308 K)

Corrected: the book prints ΔH = 52898 J mol−1 = 52.898 kJ mol−1, which does not follow from the data given. With log(Kw2/Kw1) = 2, ΔH = 2 × 2.303 × 8.314/(1/298 − 1/308) ≈ 3.51 × 105 J mol−1 ≈ 351 kJ mol−1. (The real water data, Kw 10−14 to about 2.1 × 10−14, gives about 52 kJ mol−1; the question data as printed gives 351 kJ.)

Teacher's Note: Van't Hoff relation links Kw at two temperatures to the enthalpy of ionisation of water.

Exam Note: State the Kw values at both temperatures, then substitute.

Question I.I.T. Special Problem 2. Calculate the approximate pH of a 0.100 M aqueous H2S solution. K1 and K2 for H2S are 1.00 × 10−7 and 1.30 × 10−13 respectively at 25°C.

Solution.

K2 << K1. Hence H+ ions are mainly from 1st dissociation H2S ⇌ H+ + HS−.

K1 = [H+][HS−]/[H2S] = [H+]2/[H2S] or [H+] = √(K1[H2S]) = √(10−7 × 10−1) = 10−4. Hence pH = 4

Teacher's Note: K2 is a million times smaller than K1, so only the first ionisation counts.

Exam Note: Neglect second dissociation and say why.

Question I.I.T. Special Problem 3. What volume of 0.10 M sodium formate solution should be added to 50 ml of 0.05 M formic acid to produce a buffer solution of pH 4.0? pKa for formic acid is 3.80.

Solution.

The pH value of an acid buffer is given by pH = pKa + log([Salt]/[Acid]); 4 = 3.8 + log([Salt]/[Acid]), or log([Salt]/[Acid]) = 0.2 or [Salt]/[Acid] = 1.5849, or (no. of moles of salt)/(no. of moles of acid) = 1.5849 (as volume is same for both).

No. of moles of acid present = (0.05/1000) × 50 = 2.5 × 10−3. ∴ No. of moles of salt = 1.5849 × 2.5 × 10−3 = 3.962 × 10−3.

Hence volume of 0.1 M sodium formate required = (1000/0.1) × 3.962 × 10−3 = 39.62 ml

Teacher's Note: Both components share one volume, so the mole ratio equals the concentration ratio in Henderson's equation.

Exam Note: Compute moles of acid first, then moles of salt.

Question I.I.T. Special Problem 4. Calculate the pH at equivalence point when a solution of 0.10 M acetic acid is titrated with a solution of 0.10 M NaOH solution. Ka for acetic acid = 1.9 × 10−5.

Solution.

At the equivalent point, CH3COONa is formed and its concentration = 0.1/2 M = 0.05 M. It is a salt of weak acid and strong base. The formula for finding the pH of such a salt is pH = −½[log Kw + log Ka − log c]

∴ pH = −½[log 10−14 + log(1.9 × 10−5) − log(5 × 10−2)] = −½[−14 + (−5 + 0.2788) − (−2 + 0.6990)] = ½(14 + 5 − 0.2788 − 2 + 0.6990) = 17.42/2 = 8.71

Teacher's Note: At equivalence only the acetate salt remains and its hydrolysis makes the solution basic.

Exam Note: Equal volumes halve the salt concentration to 0.05 M.

Question I.I.T. Special Problem 5. Calcium lactate is a salt of a weak organic acid and represented as Ca(Lac)2. A saturated solution of Ca(Lac)2 contains 0.13 mole of this salt in 0.50 litre solution. The pOH of this solution is 5.60. Assuming complete dissociation of the salt, calculate Ka of lactic acid.

Solution.

In solution, Ca(Lac)2 is hydrolysed as follows: Ca(Lac)2 + 2H2O ⇌ Ca(OH)2 + 2HLac (lactic acid, weak), i.e. Lac− + H2O ⇌ OH− + HLac. Hydrolysis constant Kh = [OH−][HLac]/[Lac−] ...(i)

But [Ca(Lac)2] = 0.26 mol L−1 so that [Lac−] = 0.52 mol L−1, and pOH = 5.60 so that −log[OH−] = 5.60, [OH−] = antilog(−5.6) = 2.51 × 10−6 M.

∴ Kh = (2.51 × 10−6)2/0.52 = 1.21 × 10−11 (using [HLac] = [OH−]).

Further HLac ⇌ H+ + Lac−, Ka = [H+][Lac−]/[HLac] ...(ii). Also Kw = [H+][OH−] ...(iii). From (i), (ii) and (iii), Ka = Kw/Kh = 10−14/(1.21 × 10−11) = 8.26 × 10−4

Teacher's Note: Each formula unit gives two lactate ions; hydrolysis gives equal OH− and HLac.

Exam Note: Remember [Lac−] = 2 × 0.26 M.

Question I.I.T. Special Problem 6. A 40 mL solution of a weak base BOH is titrated with 0.1 N HCl solution. The pH of the solution is found to be 10.04 and 9.14 after the addition of 5.0 mL and 20.0 mL of acid respectively. Find out Kb for the weak base.

Solution.

Suppose initially 40 mL of weak base BOH contains x milli moles of the base.

Case I. After adding 5.0 mL of 0.1 N HCl, pH = 10.04, so pOH = 14 − 10.04 = 3.96. 5 mL of 0.1 N HCl = 5 × 0.1 = 0.5 milli mole. BOH + HCl → BCl + H2O: initial x, 0.5, 0, 0; after reaction x − 0.5, 0, 0.5, 0.5.

pOH = pKb + log([BCl]/[BOH]); ∴ 3.96 = −log Kb + log(0.5/(x − 0.5)) ...(i)

Case II. After adding 20.0 mL of 0.1 N HCl, pH = 9.14, so pOH = 14 − 9.14 = 4.86. 20 mL of 0.1 N HCl = 2 milli moles. After reaction BOH = x − 2, BCl = 2.

∴ 4.86 = −log Kb + log(2/(x − 2)) ...(ii)

Subtracting (i) from (ii): 0.9 = log(2/(x − 2)) − log(0.5/(x − 0.5)), which gives (x − 0.5)/(x − 2) = 1.986 (i.e. 100.298), x − 0.5 = 1.986x − 3.972, 0.986x = 3.472, x = 3.52 milli moles.

Substituting in (ii): 4.86 = −log Kb + log(2/(3.52 − 2)), log Kb = −4.86 + 0.1190 = −4.741 (book: −4.7408 = 5̄.2592), Kb = 1.817 × 10−5

Teacher's Note: Two titration points give two buffer equations; subtracting them eliminates Kb and yields the initial millimoles.

Exam Note: Use pOH = pKb + log(salt/base) at both points.

Question I.I.T. Special Problem 7. A certain weak acid has Ka = 1.0 × 10−4. Calculate the equilibrium constant for its reaction with a strong base.

Solution.

HA + BOH ⇌ BA + H2O (weak, strong), or HA + B+ + OH− ⇌ B+ + A− + H2O, or HA + OH− ⇌ A− + H2O.

K = [A−]/([HA][OH−]) ...(i). Further for the weak acid, HA ⇌ H+ + A−, Ka = [H+][A−]/[HA] ...(ii). Also Kw = [H+][OH−] ...(iii).

From (i), (ii) and (iii), K = Ka/Kw = 10−4/10−14 = 1010

Teacher's Note: The net ionic neutralisation equals Ka/Kw, a very large value: it goes to completion.

Exam Note: Write net ionic equation, then K = Ka/Kw.

Question I.I.T. Special Problem 8. The solubility product (Ksp) of Ca(OH)2 at 25°C is 4.42 × 10−5. A 500 ml of a saturated solution of Ca(OH)2 is mixed with equal volume of 0.4 M NaOH. How much Ca(OH)2 in milligrams is precipitated?

Solution.

Step I. Amount of Ca(OH)2 in 500 ml of saturated solution. Suppose solubility of Ca(OH)2 = x mol L−1. Ksp = [Ca2+][OH−]2 = x × (2x)2 = 4x3 = 4.42 × 10−5, x3 = 1.105 × 10−5, x = 2.227 × 10−2 mol L−1.

∴ Amount of Ca(OH)2 present in 500 ml = (2.227 × 10−2/2) × 74 g = 82.39 × 10−2 g = 823.9 mg (as printed; this equals 0.8239 g).

Step II. Amount of Ca(OH)2 in solution after mixing. Conc. of NaOH in the mixture = 0.4/2 = 0.2 M, [OH−] = 0.2 M. Ksp = [Ca2+][OH−]2, [Ca2+] = 4.42 × 10−5/(0.2)2 = 1.105 × 10−3 mol L−1. Total volume after mixing = 1000 ml.

∴ Amount of Ca(OH)2 in the mixture = 1.105 × 10−3 × 74 g = 0.0818 g = 81.8 mg. ∴ Amount of Ca(OH)2 precipitated = 823.9 − 81.8 = 742.1 mg

Teacher's Note: Added OH− (common ion) forces most of the dissolved calcium out; use the new volume of 1 L.

Exam Note: Do saturated amount, then residual solubility, then subtract.

Question I.I.T. Special Problem 9. Calculate the pH at which Mg(OH)2 begins to precipitate from a solution containing 0.10 M Mg2+ ions. Ksp of Mg(OH)2 = 1 × 10−11.

Solution.

Minimum [OH−] after which Mg(OH)2 begins to precipitate can be calculated from [Mg2+][OH−]2 = Ksp of Mg(OH)2; (0.10)[OH−]2 = 10−11 or [OH−]2 = 10−10 or [OH−] = 10−5, or [H+] = 10−9, or pH = 9

Teacher's Note: Precipitation begins when the ionic product just equals Ksp.

Exam Note: Set ionic product equal to Ksp and solve for [OH−].

Question I.I.T. Special Problem 10. The pH of blood stream is maintained by a proper balance of H2CO3 and NaHCO3 concentrations. What volume of 5M NaHCO3 solution should be mixed with a 10 ml sample of blood which is 2M in H2CO3 in order to maintain a pH of 7.4? Ka for H2CO3 in blood is 7.8 × 10−7.

Solution.

pH = pKa + log([Salt]/[Acid]); 7.4 = −log(7.8 × 10−7) + log([NaHCO3]/[H2CO3]); log([NaHCO3]/[H2CO3]) = 7.4 + (−7 + 0.8921) = 1.2921, or [NaHCO3]/[H2CO3] = antilog 1.2921 = 19.59.

H2CO3 present in 10 ml of blood (2M) = (2/1000) × 10 = 0.02 mole. ∴ NaHCO3 that should be present = 19.59 × 0.02 = 0.3918 mole.

Volume of 5 M NaHCO3 required = (1000/5) × 0.3918 = 78.36 ml

Teacher's Note: Henderson ratio 19.6 fixes the salt moles; the volume of 5 M stock follows from moles/molarity.

Exam Note: Find ratio first, then moles, then volume.

Question I.I.T. Special Problem 11. An aqueous solution of a metal bromide MBr2 (0.05 M) is saturated with H2S. What is the minimum pH at which MS will be precipitated? (Ksp for MS = 6.0 × 10−21, concentration of saturated H2S = 0.1 M, K1 = 10−7 and K2 = 1.3 × 10−13 for H2S)

Solution.

[M2+] = [MBr2] = 0.05 M. For the precipitation of MS, minimum [S2−] can be calculated from [S2−][M2+] = Ksp i.e. [0.05][S2−] = 6.0 × 10−21, or [S2−] = 1.2 × 10−19.

S2− ions are obtained from H2S ⇌ H+ + HS− (K1) and HS− ⇌ H+ + S2− (K2). K1K2 = [H+]2[S2−]/[H2S].

10−7 × 1.3 × 10−13 = [H+]2(1.2 × 10−19)/(0.1), or [H+]2 = (1.3 × 10−20 × 10−1)/(1.2 × 10−19) = 1.083 × 10−2, or [H+] = 1.041 × 10−1 = 0.1041 M. ∴ pH = −log(0.1041) = 0.9826.

Teacher's Note: Overall K1K2 links [S2−] to [H+]; acidity controls sulphide precipitation.

Exam Note: Get minimum [S2−] from Ksp first.

Question I.I.T. Special Problem 12. Nicotinic acid (Ka = 1.4 × 10−5) is represented by the formula HNiC. Calculate its percentage dissociation in a solution which contains 0.10 mole of nicotinic acid per 2.0 litre of solution.

Solution.

Suppose degree of dissociation of nicotinic acid = α. HNiC ⇌ H+ + NiC−. Initial 0.1 mole; at equilibrium 0.1(1 − α), 0.1α, 0.1α. Molar conc. at eqm = 0.1(1 − α)/2, 0.1α/2, 0.1α/2.

Ka = [H+][NiC−]/[HNiC]; 1.4 × 10−5 = (0.1α/2)(0.1α/2)/(0.1(1 − α)/2). If α << 1, then 1.4 × 10−5 = (0.05α)2/0.05 = 0.05α2, or α2 = 2.8 × 10−4.

α = √(2.8 × 10−4) = 1.67 × 10−2 = 0.0167, so % dissociation = 1.67% (approx.).

Corrected: the book writes α = 5.29 × 10−2 and 5.3%, which is a square-root error (√(2.8 × 10−4) = 0.0167, not 0.053).

Teacher's Note: Concentration is 0.05 M (0.1 mol in 2 L); α = √(Ka/c) for a weak acid.

Exam Note: Divide moles by volume first; then α = √(Ka/c).

Question I.I.T. Special Problem 13. The pH of 0.05 M aqueous solution of diethylamine is 12.0. Calculate its Kb.

Solution.

(C2H5)2NH + H2O ⇌ (C2H5)2NH2+ + OH−. As pH = 12, [H+] = 10−12 or [OH−] = 10−2 = [(C2H5)2NH2+].

[(C2H5)2NH] = 0.05 − 0.01 = 0.04

Kb = [(C2H5)2NH2+][OH−]/[(C2H5)2NH] = (10−2 × 10−2)/0.04 = 2.5 × 10−3

Teacher's Note: Here ionisation is large, so subtract the ionised amount (0.01 M) from 0.05 M.

Exam Note: Do not neglect x; unionised amount is 0.04 M.

Question I.I.T. Special Problem 14. 0.15 mole of pyridinium chloride has been added into 500 cm3 of 0.2 M pyridine solution. Calculate pH and hydroxyl ion concentration in the resulting solution assuming no change in volume (Kb for pyridine = 1.5 × 10−9 M).

Solution.

For basic buffer, pOH = pKb + log([Salt]/[Base]). Here base is pyridine and salt is pyridinium chloride. Conc. of pyridine = 0.2 M; conc. of pyridinium chloride = 0.15 mol in 500 cm3 = 0.30 M. pKb = −log(1.5 × 10−9) = 8.8239.

∴ pOH = 8.8239 + log(0.30/0.20) = 8.8239 + 0.1761 = 9.0, i.e. [OH−] = 10−9 M and pH = 14 − 9 = 5.0.

Corrected: the book then adds the OH− from water (10−7 M) to get [OH−] = 1.01 × 10−7 M and pH = 7.0044. This is wrong: the buffer equation already gives the total [OH−] = 10−9 M, and pH = 5.0 (check: pKa of pyridinium = 5.176, pH = 5.176 + log(0.2/0.3) = 5.0).

Teacher's Note: The buffer equation gives the total [OH−]; water's own ionisation is already included and suppressed.

Exam Note: Basic buffer: pOH first, then pH = 14 − pOH.

Question I.I.T. Special Problem 15. An aqueous solution contains 10% ammonia by mass and has a density of 0.99 g cm−3. Calculate hydroxyl and hydrogen ion concentration in this solution. Ka for NH4+ = 5.0 × 10−10 M.

Solution.

10% ammonia by mass means 10 g NH3 are present in 100 g of the solution. ∴ Molarity of the solution = (10/17) × (1/(100/0.99)) × 1000 = 5.82 M.

NH3 + H2O → NH4OH ⇌ NH4+ + OH−; [OH−] = Cα = C√(Kb/C) = √(KbC) = √((Kw/Ka)C) = √((10−14/(5.0 × 10−10)) × 5.82) = 1.079 × 10−2 M

∴ [H+] = Kw/[OH−] = 10−14/(1.079 × 10−2) = 0.9268 × 10−12 = 9.268 × 10−13 M

Teacher's Note: Convert mass percent and density to molarity first; Kb of NH3 = Kw/Ka of NH4+.

Exam Note: Show molarity step; use [OH−] = √(KbC).

Question I.I.T. Special Problem 16. Calculate the pH of an aqueous solution of 1.0 M ammonium formate assuming complete dissociation (pKa of formic acid = 3.8 and pKb of ammonia = 4.8).

Solution.

For the salt of weak acid and weak base, [H+] = √(KwKa/Kb), or pH = −½[log Ka + log Kw − log Kb] = ½[pKa + pKw − pKb] = ½[3.8 + 14 − 4.8] = 6.5

Teacher's Note: Salt of weak acid and weak base: pH is independent of concentration.

Exam Note: Quote pH = ½(pKa + pKw − pKb).

Question I.I.T. Special Problem 17. What is the pH of a 0.50 M aqueous NaCN solution? pKb of CN− is 4.70.

Solution.

NaCN + H2O ⇌ NaOH + HCN, or CN− + H2O ⇌ OH− + HCN. Kb = [OH−][HCN]/[CN−] = [OH−]2/[CN−].

∴ pKb = −log Kb = −2 log[OH−] + log[CN−], or 4.70 = −2 log[OH−] + log(0.5) ([CN−] = [NaCN]), or 2 log[OH−] = −5.00, log[OH−] = −2.5, pOH = 2.5, pH = 14 − 2.5 = 11.5

Teacher's Note: CN− is the conjugate base of a weak acid so the solution is strongly basic.

Exam Note: Write hydrolysis equation, Kb expression, then pOH.

Question I.I.T. Special Problem 18. The ionization constant of NH4+ in water is 5.6 × 10−10 at 25°C. The rate constant for reaction of NH4+ and OH− to form NH3 and H2O at 25°C is 3.4 × 1010 litre mol−1 sec−1. Calculate the rate constant for proton transfer from water to NH3.

Solution.

NH4+ + H2O ⇌ NH4OH + H+, Ka = 5.6 × 10−10. NH3 + H2O ⇌ NH4+ + OH− (forward rate constant kf, backward kb), kb = 3.4 × 1010. Aim: to find kf.

For a conjugate acid-base pair Kacid × Kbase = Kw i.e. Ka × Kb = Kw, ∴ Kb = Kw/Ka = 10−14/(5.6 × 10−10). But Kb = kf/kb, ∴ kf = Kb × kb = (10−14/(5.6 × 10−10)) × 3.4 × 1010 = 0.607 × 106 = 6.07 × 105 (s−1)

Teacher's Note: Equilibrium constant equals forward rate constant over backward; Kb comes from Kw/Ka.

Exam Note: Link Kb = kf/kb to Kw/Ka.

Question I.I.T. Special Problem 19. Calculate the percentage of hydrolysis in 0.003 M aqueous solution of NaOCN (Ka for HOCN = 3.33 × 10−4 M).

Solution.

NaOCN + H2O ⇌ NaOH + HOCN, or OCN− + H2O ⇌ OH− + HOCN. Initial conc. c; conc. at eqm. c(1 − h), ch, ch ≈ c, where h is the degree of hydrolysis.

Hydrolysis constant Kh = (ch · ch)/c = ch2 or h = √(Kh/c). Kh = [OH−][HOCN]/[OCN−]; Ka = [H+][OCN−]/[HOCN]; Kw = [H+][OH−]. Combining these equations, Kh = Kw/Ka = 10−14/(3.33 × 10−4).

∴ h = √((10−10/3.33) × (1/(3 × 10−3))) = √(10−8) = 10−4. ∴ % age hydrolysis = 10−4 × 100 = 0.01

Teacher's Note: Hydrolysis of a weak-acid anion is tiny: Kh = Kw/Ka ≈ 3 × 10−11.

Exam Note: Convert h to percentage at the end.

Question I.I.T. Special Problem 20. An aqueous solution of aniline of concentration 0.24 M is prepared. What concentration of sodium hydroxide is needed in this solution so that anilinium ion concentration remains at 1 × 10−8 M? (Ka for C6H5NH3+ = 2.4 × 10−6 M)

Solution.

In aqueous solution, aniline is hydrolysed as C6H5NH2 + H2O ⇌ C6H5NH3+ + OH−. When NaOH is added, hydrolysis will be suppressed so that in the final solution, [C6H5NH3+] = 10−8 M (given).

If conc. of NaOH added is x mol L−1, then at equilibrium [C6H5NH2] = 0.24 − 10−8 ≈ 0.24, [C6H5NH3+] = 10−8 M, [OH−] = 10−8 + x ≈ x M.

Hydrolysis constant Kh = [C6H5NH3+][OH−]/[C6H5NH2] ...(i). Ka = [C6H5NH2][H+]/[C6H5NH3+] ...(ii). Kw = [H+][OH−] ...(iii). Combining, Kh = Kw/Ka = 10−14/(2.4 × 10−6) = 10−8/2.4.

Substituting in (i): 10−8/2.4 = (10−8 × x)/0.24, which gives x = 0.1 M (10−1 M).

Corrected: the book prints x = 10−2 M; solving 10−8/2.4 = 10−8x/0.24 gives x = 0.24/2.4 = 0.1 M. Check: [OH−] = 0.1 gives [H+] = 10−13 and Ka = 0.24 × 10−13/10−8 = 2.4 × 10−6.

Teacher's Note: Added OH− pushes aniline hydrolysis back; use Kh = Kw/Ka with the fixed anilinium level.

Exam Note: Neglect 10−8 beside 0.24 and x.

Question I.I.T. Special Problem 21. A sample of hard water contains 96 ppm of SO42− and 183 ppm of HCO3− with Ca2+ as the only cation. How many moles of CaO will be required to remove HCO3− from 1000 kg of this water? If 1000 kg of this water is treated with the amount of CaO calculated above, what will be the concentration (in ppm) of residual Ca2+ ions? (Assume CaCO3 to be completely insoluble in water). If the Ca2+ ions in one litre of the treated water are completely exchanged with hydrogen ions, what will be its pH? (One ppm means one part of the substance in one million parts of water, weight/weight).

Solution.

SO42− present in 1000 kg of water = (96/106) × 1000 kg = 96 g = 96/96 = 1 mole. HCO3− present in 1000 kg of water = (183/106) × 1000 kg = 183 g = 183/61 = 3 moles.

Ca2+ present along with SO42− ions = 1 mole. Ca2+ present along with HCO3− as Ca(HCO3)2 = 3/2 mole. ∴ Total Ca2+ present in 1000 kg of water = 1 + 3/2 = 2.5 moles.

CaO added reacts with Ca(HCO3)2 as follows: Ca(HCO3)2 + CaO → 2CaCO3↓ + H2O. But Ca(HCO3)2 present = 3/2 mole, ∴ CaO required = 3/2 mole = 1.5 moles.

After treatment with CaO i.e. removal of Ca(HCO3)2, amount of Ca2+ left (due to CaSO4 only) in 1000 kg of water = 1 mole = 40 g. ∴ Concentration of residual Ca2+ (in ppm) = 40 ppm.

Now 1000 kg of water contains Ca2+ = 1 mole, ∴ 1000 g of water contains Ca2+ = 10−3 mole. No. of moles of H+ exchanged = 2 × 10−3 mole. ∴ pH = −log(2 × 10−3) = 2.7.

Teacher's Note: Lime softening removes only temporary hardness; permanent (sulphate) Ca2+ remains, and cation exchange releases 2 H+ per Ca2+.

Exam Note: Do ppm to moles first; one Ca2+ exchanges for two H+.

Question I.I.T. Special Problem 22. A sample of AgCl was treated with 5.00 ml of 1.5 M Na2CO3 solution to give Ag2CO3. The remaining solution contained 0.0026 g of Cl− per litre. Calculate the solubility product of AgCl (Ksp for Ag2CO3 = 8.2 × 10−12).

Solution.

1.5 M Na2CO3 gives [CO32−] = 1.5 M. Ksp for Ag2CO3 = [Ag+]2[CO32−], ∴ [Ag+] = √(Ksp/[CO32−]) = √(8.2 × 10−12/1.5) = 2.34 × 10−6 M.

Ksp for AgCl = [Ag+][Cl−] = (2.34 × 10−6)(0.0026/35.5) = 1.71 × 10−10

Teacher's Note: Ag+ in equilibrium is fixed by Ag2CO3; the same [Ag+] applies to AgCl.

Exam Note: Convert g/L of Cl− to mol/L before multiplying.

Question I.I.T. Special Problem 23. An acid type indicator, HIn differs in colour from its conjugate base (In−). The human eye is sensitive to colour differences only when the ratio [In−]/[HIn] is greater than 10 or smaller than 0.1. What should be the minimum change in the pH of the solution to observe a complete colour change. (Ka = 1.0 × 10−5)?

Solution.

HIn ⇌ H+ + In−, Ka = [H+][In−]/[HIn], or [H+] = Ka[HIn]/[In−].

When [In−]/[HIn] = 10, [H+] = 10−5 × (1/10) = 10−6, pH = 6. When [In−]/[HIn] = 0.1, [H+] = 10−5 × 10 = 10−4, pH = 4. ∴ Minimum change in pH = 2

Teacher's Note: Colour change needs the ratio to move from 0.1 to 10: a 100-fold change, hence 2 pH units.

Exam Note: Evaluate pH at both ratio limits and subtract.

Question I.I.T. Special Problem 24. Calculate the amount of NH3 and NH4Cl required to prepare a buffer solution of pH 9.0 when total concentration of buffering reagents is 0.6 mol L−1. pKb for NH3 = 4.7, log 2 = 0.30.

Solution.

pH = 9.0. Hence pOH = 14 − 9 = 5. pOH = pKb + log([Salt]/[Base]); 5 = 4.7 + log([Salt]/[Base]) or log([Salt]/[Base]) = 0.3, or [Salt]/[Base] = antilog 0.3 = 2, i.e. [Salt] = 2 × [Base]. Also given: [Salt] + [Base] = 0.6 mol L−1.

On solving, [Base] = 0.2 mol L−1 and [Salt] = 0.4 mol L−1.

Teacher's Note: Ratio gives salt = 2 × base; total 0.6 M splits into 0.4 M salt, 0.2 M base.

Exam Note: Get the ratio from pOH, then solve with the total.

Question I.I.T. Special Problem 25. Ka for ascorbic acid (HAsc) is 5 × 10−5. Calculate the hydrogen ion concentration and percentage of hydrolysis in an aqueous solution in which the concentration of Asc− ions is 0.02 M.

Solution.

As ascorbic acid is a weak acid, aqueous solution of Asc− means the solution of a salt of weak acid with strong base. For such a salt, degree of hydrolysis is given by h = √(Kw/(Ka × c)) = √(10−14/(5 × 10−5 × 2 × 10−2)) = 10−4 = 10−4 × 100% = 0.01%.

Asc− + H2O ⇌ HAsc + OH− (c, then c − ch, ch, ch). [OH−] = ch = 0.02 × 10−4 = 2 × 10−6 mol L−1. ∴ [H+] = Kw/[OH−] = 10−14/(2 × 10−6) = 5 × 10−9 mol L−1

Teacher's Note: Ascorbate hydrolyses as a weak-acid anion, giving a slightly basic solution with [OH−] = ch.

Exam Note: Get h first, then [OH−], then [H+].

Question I.I.T. Special Problem 26. The solubility product of SrF2 in water is 8 × 10−10. Calculate its solubility in 0.1 M NaF aqueous solution.

Solution.

As NaF is a strong electrolyte, it ionizes completely. Hence [F−] = 0.1 M. Ksp for SrF2 = [Sr2+][F−]2; ∴ 8 × 10−10 = [Sr2+](0.1)2 or [Sr2+] = 8 × 10−8 mol L−1. ∴ Solubility of SrF2 in 0.1 M NaF sol. = 8 × 10−8 mol L−1

Teacher's Note: Common F− at 0.1 M dominates, so the F− from SrF2 itself is negligible.

Exam Note: Use [F−] = 0.1 M squared in Ksp.

Question I.I.T. Special Problem 27. What will be the resultant pH when 200 ml of an aqueous solution of HCl (pH = 2.0) is mixed with 300 ml of an aqueous solution of NaOH (pH = 12.0)?

Solution.

pH = 2 means [H+] = 10−2 M. pH = 12 means [H+] = 10−12 or [OH−] = 10−2 M.

Thus, 200 ml of 10−2 M HCl are mixed with 300 ml of 10−2 M NaOH. After neutralization NaOH left = 100 ml of 10−2 M. Total volume after mixing = 500 ml.

In the final solution, after mixing [OH−] = 10−2/5 = 2 × 10−3 M, or [H+] = 10−14/(2 × 10−3) = 5 × 10−12. ∴ pH = −log[H+] = −log(5 × 10−12) = 12 − 0.70 = 11.30

Corrected: the book prints 12 − 0.69 = 11.39; log 5 = 0.699, so pH = 11.30.

Teacher's Note: After neutralisation excess NaOH (1 millimole in 500 mL) fixes the pH.

Exam Note: Subtract millimoles, then divide by the total volume.

Question I.I.T. Special Problem 28. Determine the number of moles of AgI which may be dissolved in 1.0 litre of 1.0 M CN− solution. Ksp for AgI and Kc for Ag(CN)2− are 1.2 × 10−17 M2 and 7.1 × 1019 M−2 respectively.

Solution.

Suppose number of moles of AgI which may be dissolved in 1.0 litre of 1.0 M CN− solution = x. Then AgI(s) + 2CN−(aq) ⇌ [Ag(CN)2]− + I−: initial moles x, 1, 0, 0; after reaction 0, 1 − 2x, x, x.

Keq = [Ag(CN)2−][I−]/[CN−]2 = x2/(1 − 2x)2 ...(i)

Further, AgI(s) ⇌ Ag+(aq) + I−(aq), Ksp = [Ag+][I−] = 1.2 × 10−17 ...(ii). Ag+(aq) + 2CN−(aq) ⇌ [Ag(CN)2]−, Kc = [Ag(CN)2−]/([Ag+][CN−]2) = 7.1 × 1019 ...(iii)

From (i), (ii) and (iii), Keq = Ksp × Kc = (1.2 × 10−17) × (7.1 × 1019) = 8.52 × 102.

∴ x2/(1 − 2x)2 = 8.52 × 102, or x/(1 − 2x) = 29.2, or x = 29.2 − 58.4x, or x = 0.49 mole

Teacher's Note: Dissolution of AgI by complexation has K = Ksp × Kc; take the square root to solve.

Exam Note: Multiply Ksp by Kc to get the overall constant.

Question I.I.T. Special Problem 29. 0.16 g of N2H4 are dissolved in water and the total volume made upto 500 ml. Calculate the percentage of N2H4 that has reacted with water in this solution. The Kb for N2H4 is 4.0 × 10−6 M.

Solution.

N2H4 + H2O ⇌ N2H5+ + OH−. Conc. of N2H4 = 0.16 g in 500 ml = 0.32 g L−1 = 0.32/32 mol L−1 = 0.01 M = 10−2 M. Kb = 4.0 × 10−6 M.

Degree of ionisation α = √(Kb/c) = √(4.0 × 10−6/10−2) = 2 × 10−2, i.e. 2%.

Corrected: the book uses h = √(Kw/(Kbc)) (the formula for hydrolysis of a salt) and gets 0.05%. For a weak base reacting with water, α = √(Kb/c) = 0.02, i.e. 2%.

Teacher's Note: Percentage reacted means degree of ionisation of the weak base, √(Kb/c); do not use Kw.

Exam Note: Molar mass of N2H4 is 32; convert grams to molarity first.

Question I.I.T. Special Problem 30. The solubility of Pb(OH)2 in water is 6.7 × 10−6 M. Calculate the solubility of Pb(OH)2 in a buffer solution of pH = 8.

Solution.

Pb(OH)2 ⇌ Pb2+ + 2OH−. Ksp = [Pb2+][OH−]2 = s × (2s)2 = 4s3 = 4 × (6.7 × 10−6)3 = 1.20 × 10−15.

In a solution with pH = 8, [H+] = 10−8 and [OH−] = 10−6. ∴ 1.2 × 10−15 = [Pb2+] × (10−6)2 or [Pb2+] = 1.2 × 10−15/(10−6)2 = 1.2 × 10−3 M

Teacher's Note: A buffer fixes [OH−] independently of the dissolving salt, so Ksp directly gives [Pb2+].

Exam Note: Get Ksp = 4s3 from the pure-water solubility first.

Question I.I.T. Special Problem 31. Two buffers (X) and (Y) of pH 4.0 and 6.0 respectively are prepared from acid HA and the salt NaA. Both the buffers are 0.50 M in HA. What would be the pH of the solution obtained by mixing equal volumes of the two buffers? (KHA = 1.0 × 10−5)

Solution.

For buffer X, pH = pKa + log([Salt]/[Acid]) i.e. 4 = 5 + log([Salt]/0.5), or log([Salt]/0.5) = −1, or [Salt]/0.5 = 10−1, or [Salt] = 0.05 M.

For buffer Y, 6 = 5 + log([Salt]/0.5), or log([Salt]/0.5) = 1, [Salt]/0.5 = 10, or [Salt] = 5 M.

When equal volumes of both the buffers are mixed, [Acid] = 0.5, [Salt] = (5 + 0.05)/2 = 2.525 M. pH = pKa + log([Salt]/[Acid]) = 5 + log(2.525/0.5) = 5 + log 5.05 = 5.7

Teacher's Note: Mixing equal volumes halves each concentration, but the acid is 0.5 M in both, so only salt needs averaging.

Exam Note: Average the salt concentrations, then Henderson.

Question I.I.T. Special Problem 32. Determine the concentration of NH3 solution whose one litre can dissolve 0.10 mole AgCl. Ksp of AgCl and Kf of Ag(NH3)2+ are 1.0 × 10−10 M2 and 1.6 × 107 M−2 respectively.

Solution.

AgCl → Ag+ + Cl−. ∴ 0.1 mole AgCl on dissolution will give 0.1 mole Ag+ ions and 0.1 mole Cl− ions. Ag+ ions will combine with NH3: Ag+ + 2NH3 ⇌ Ag(NH3)2+. Hence [Ag+] + [Ag(NH3)2+] = 0.1 mole ...(i)

Kf = 1.6 × 107 = [Ag(NH3)2+]/([Ag+][NH3]2) ...(ii)

Further [Ag+][Cl−] = Ksp = 10−10, or [Ag+](0.1) = 10−10, or [Ag+] = 10−9. Neglecting this conc. in eqn. (i), we get [Ag(NH3)2+] = 0.1.

Putting these values in eqn. (ii): 0.1/(10−9 × [NH3]2) = 1.6 × 107, or [NH3]2 = 0.1/(10−9 × 1.6 × 107) = 1/(16 × 10−2), or [NH3] = 2.5 M.

Also 0.2 M NH3 is needed to dissolve 0.01 M Ag+ ions (i.e. 0.2 mole NH3 is consumed in forming 0.1 mole of the complex). Thus [NH3] = 2.5 + 0.2 = 2.7 M

Teacher's Note: Total ammonia = free NH3 at equilibrium plus the 2 × 0.1 mol locked in the complex.

Exam Note: Add NH3 used in the complex to free NH3.

Question I.I.T. Special Problem 33. The average concentration of SO2 in the atmosphere over a city on a certain day is 10 ppm when the average temperature is 298 K. Given that the solubility of SO2 in water at 298 K is 1.3653 moles litre−1 and the pKa of H2SO3 is 1.92, estimate the pH of rain on that day.

Solution.

Book working: SO2 + H2O → H2SO3; [H2SO3] = [SO2] = 1.3653 moles litre−1. H2SO3 ⇌ 2H+ + SO32−. Suppose at equilibrium [H+] = x mol L−1; then [H2SO3] = (1.3653 − x/2), [SO32−] = x/2. Ka = [H+]2[SO32−]/[H2SO3] = (x2 × x/2)/(1.3653 − x/2) = 10−1.92. Neglecting x/2 in comparison to 1.3653, x3/(2 × 1.3653) = 10−1.92, x3 = 2.7306 × 10−1.92, and the book gives pH = 0.485.

Corrected: this book answer is not reasonable for rain. The solubility 1.3653 mol L−1 refers to pure SO2 (1 atm); air contains only 10 ppm, i.e. mole fraction 10−5, so dissolved SO2 = 1.3653 × 10−5 M. First ionisation: H2SO3 ⇌ H+ + HSO3−, Ka = 10−1.92 = 0.01202 = x2/(1.3653 × 10−5 − x). Solving the quadratic, x = 1.364 × 10−5 M, so pH ≈ 4.87 (acid rain). (Even the book's own method, solved without neglecting x/2, gives 0.51, not 0.485.)

Teacher's Note: Henry's law scales solubility by SO2 partial pressure (10 ppm = 10−5 atm); ignoring it gives impossible pH.

Exam Note: Scale by ppm; solve the quadratic.

Question I.I.T. Special Problem 34. What [H3O+] must be maintained in a saturated H2S solution to precipitate Pb2+ but not Zn2+ from a solution in which each ion is present at a concentration of 0.01 M? [Ksp H2S = 1.1 × 10−22 and Ksp ZnS = 1.0 × 10−21]

Solution.

Ksp for ZnS = 10−21 and [Zn2+] = 0.01 M = 10−2 M. But Ksp(ZnS) = [Zn2+][S2−], i.e. 10−21 = [10−2][S2−] or [S2−] = 10−19 M.

Thus to prevent precipitation of Zn2+ ions, [S2−] must be less than 10−19 M. Further H2S + 2H2O → 2H3O+ + S2−; ∴ Ksp(H2S) = [H3O+]2[S2−], 1.1 × 10−22 = [H3O+]2 × 10−19, or [H3O+]2 = 1.1 × 10−3 = 11 × 10−4, or [H3O+] = 3.32 × 10−2 M

Teacher's Note: Acidity controls [S2−]; keep it just low enough that ZnS stays dissolved while PbS (far less soluble) precipitates.

Exam Note: Find limiting [S2−] from ZnS first.

Question I.I.T. Special Problem 35. 0.01 mol of AgNO3 is added to one litre of a solution which is 0.1 M in Na2CrO4 and 0.005 M in NaIO3. Calculate the mol of precipitate formed at equilibrium and the concentration of Ag+, IO3− and CrO42− (Ksp values of Ag2CrO4 and AgIO3 are 10−8 and 10−13 respectively).

Solution.

2AgNO3 + Na2CrO4 → Ag2CrO4 + 2NaNO3 (0.1 mol Na2CrO4); AgNO3 + NaIO3 → AgIO3 + NaNO3 (0.005 mol NaIO3).

AgNO3 that will react with NaIO3 = 0.005 mol; AgIO3 (ppt.) formed = 0.005 mol. AgNO3 left = 0.01 − 0.005 = 0.005 mol. Whole of it will react completely with Na2CrO4 (as it is present in larger amount). Na2CrO4 reacted = 0.005/2 = 0.0025 mol. Hence Na2CrO4 left = 0.1 − 0.0025 = 0.0975 mol; Ag2CrO4 (ppt.) formed = 0.0025 mol.

Total [CrO42−] = 0.0975 mol + CrO42− obtained from Ag2CrO4 (negligible) = 0.0975 mol = 9.75 × 10−2 M.

Ag2CrO4 → 2Ag+ + CrO42−; Ksp = [Ag+]2[CrO42−] = [Ag+]2 × (9.75 × 10−2) = 10−8, or [Ag+]2 ≈ 0.1 × 10−6, or [Ag+] = 0.32 × 10−3 M = 3.2 × 10−4 M.

Total precipitate formed = 0.005 + 0.0025 = 0.0075 mol.

This is the total [Ag+] present in the solution (obtained from Ag2CrO4 and AgIO3): AgIO3 → Ag+ + IO3−; Ksp = [Ag+][IO3−]; 10−13 = (3.2 × 10−4)[IO3−], or [IO3−] = 0.3125 × 10−9 = 3.125 × 10−10 M.

Answers: precipitate = 0.0075 mol; [Ag+] = 3.2 × 10−4 M; [IO3−] = 3.1 × 10−10 M; [CrO42−] = 0.0975 M.

Teacher's Note: AgIO3 (smaller Ksp) takes silver first; leftover silver then precipitates as chromate.

Exam Note: Treat precipitations in sequence, then use Ksp for equilibrium ions.

Question I.I.T. Special Problem 36. 500 mL of 0.2 M aqueous acetic acid is mixed with 500 mL of 0.2 M HCl at 25°C. (i) Calculate the degree of dissociation of acetic acid in the resulting solution and pH of the solution. (ii) If 6 g of NaOH is added to the above solution, determine the final pH [Assume there is no change in volume on mixing; Ka of acetic acid is 1.75 × 10−5 mol L−1]

Solution.

(i) Millimoles of CH3COOH = 500 × 0.2 = 100; millimoles of HCl = 500 × 0.2 = 100; final volume after mixing = 1000 mL. ∴ [CH3COOH] = 100/1000 = 0.1 M, [HCl] = 100/1000 = 0.1 M.

CH3COOH ⇌ CH3COO− + H+: before dissociation 0.1 M, 0, 0.1 M (from HCl); after dissociation (0.1 − x), x, (0.1 + x). Ka = x(0.1 + x)/(0.1 − x). As in the presence of HCl, dissociation of CH3COOH will be very small (common ion effect), x is very small. Hence Ka = x(0.1)/0.1 = x = 1.75 × 10−5 mol L−1.

∴ Degree of dissociation = x/0.1 = 1.75 × 10−5/0.1 = 1.75 × 10−4 = 0.0175%. Further [H+] = 0.1 + x ≈ 0.1, ∴ pH = −log 0.1 = 1

(ii) 6 g of NaOH = 6/40 = 0.15 mole. CH3COOH + HCl + NaOH: initial 0.1, 0.1, 0.15; NaOH first neutralises HCl (0.1) and the remaining 0.05 mole neutralises acetic acid: at eqm 0.05, 0, 0 and CH3COONa 0.05, NaCl 0.1. Thus the solution will now be 0.05 M in CH3COOH and 0.05 M in CH3COONa i.e. it is an acidic buffer.

pH = −log Ka + log([Salt]/[Acid]) = −log(1.75 × 10−5) + log(0.05/0.05) = 4.757

Corrected: the book prints the degree of dissociation as 0.00175% in (i); 1.75 × 10−4 × 100 = 0.0175%.

Teacher's Note: Strong HCl suppresses ionisation of acetic acid (common ion); NaOH reacts with the strong acid before the weak acid.

Exam Note: NaOH neutralises HCl first; remainder forms a buffer.

Question I.I.T. Special Problem 37. The ionization constant of benzoic acid is 6.46 × 10−5 and Ksp for silver benzoate is 2.5 × 10−13. How many times is silver benzoate more soluble in a buffer of pH 3.19 compared to its solubility in pure water?

Solution.

C6H5COOAg → C6H5COO− + Ag+. Solubility in water. Suppose solubility in water = x mol L−1. Then [C6H5COO−] = [Ag+] = x mol L−1. ∴ x2 = Ksp or x = √Ksp = √(2.5 × 10−13) = 5 × 10−7 mol L−1.

Solubility in buffer of pH 3.19. pH = 3.19 means −log[H+] = 3.19, log[H+] = 4̄.81, [H+] = 6.457 × 10−4. C6H5COO− ions now combine with the H+ ions to form benzoic acid but [H+] remains almost constant because we have buffer solution. Now C6H5COOH ⇌ C6H5COO− + H+; Ka = [C6H5COO−][H+]/[C6H5COOH], or [C6H5COOH]/[C6H5COO−] = [H+]/Ka = 6.457 × 10−4/(6.46 × 10−5) = 10 ...(i)

Suppose solubility in the buffer solution = y mol L−1. Then y = [Ag+] = [C6H5COO−] + [C6H5COOH] = [C6H5COO−] + 10[C6H5COO−] = 11[C6H5COO−] (using eqn. (i)). ∴ [C6H5COO−] = y/11. Ksp = [C6H5COO−][Ag+], i.e. 2.5 × 10−13 = (y/11) × y, or y2 = 2.75 × 10−12, or y = 1.66 × 10−6.

∴ y/x = 1.66 × 10−6/(5 × 10−7) = 3.32

Teacher's Note: In acid, benzoate is protonated, so more salt must dissolve to keep [Ag+][benzoate] = Ksp (Le Chatelier).

Exam Note: Total Ag+ = benzoate + benzoic acid; use ratio 10.

Question I.I.T. Special Problem 38. Calculate the solubility of AgCN in a buffer solution of pH 3.00. Ksp for AgCN is 2.2 × 10−16 and Ka for HCN is 6.2 × 10−10.

Solution.

Similar to Problem 37. We shall get [HCN]/[CN−] = [H+]/Ka = 10−3/(6.2 × 10−10) = 1.6 × 106.

Solubility, x = [Ag+] = [CN−] + [HCN] ≈ [HCN] (as [CN−] = [HCN]/(1.6 × 106) is negligible in comparison to HCN). ∴ [CN−] = [HCN]/(1.6 × 106) = x/(1.6 × 106).

Ksp = [Ag+][CN−] = x × x/(1.6 × 106) = 2.2 × 10−16, or x = 1.9 × 10−5 mol L−1

Teacher's Note: HCN is so weak that almost all cyanide is protonated at pH 3; total silver equals HCN.

Exam Note: Write [CN−] in terms of x via the ratio [H+]/Ka.

Question I.I.T. Special Problem 39. 0.1 M HA is titrated against 0.1 M NaOH. Find the pH at the end point. Dissociation constant for the acid HA is 5 × 10−6 and the degree of hydrolysis, h < 1.

Solution.

HA + NaOH → NaA + H2O. At the end point, their equivalent amounts react together. ∴ In the final solution, [NaA] = 0.1/2 = 0.05 M. As NaA is a salt of weak acid and strong base, it hydrolyses as A− + H2O ⇌ HA + OH−.

For such a salt, pH = 7 + ½[pKa + log c] = 7 + ½[−log(5 × 10−6) + log 0.05] = 7 + ½[6 − 0.6990 + 0.6990 − 2] = 9

Teacher's Note: At the end point only the salt of a weak acid remains, so the solution is basic (pH above 7).

Exam Note: Halve the concentration (volume doubles) before using the salt formula.

Question I.I.T. Special Problem 40. A sample of mixed alkalis containing NaOH and Na2CO3 is titrated in the following two schemes: (i) 10 ml of above mixture requires 8 ml of 0.1 N HCl by using phenolphthalein. (ii) 10 ml of above mixture requires 10 ml of 0.1 N HCl by using methyl orange. Calculate the ratio of the weight of NaOH and Na2CO3 in the sample mixture.

Solution.

Basic principle: acid used with phenolphthalein = complete neutralization of NaOH + ½ neutralization of Na2CO3. Acid used with methyl orange = complete neutralization of NaOH + complete neutralization of Na2CO3.

M eq of HCl used for 10 ml of mixture using phenolphthalein = 8 × 0.1 = 0.8, ∴ M eq of NaOH + ½ M eq of Na2CO3 = 0.8 ...(i). M eq of HCl used with methyl orange = 10 × 0.1 = 1, ∴ M eq of NaOH + M eq of Na2CO3 = 1 ...(ii).

From (i) and (ii), M eq of Na2CO3 = (1 − 0.8) × 2 = 0.4; M eq of NaOH = 1 − 0.4 = 0.6. Eq. wt of Na2CO3 = 106/2 = 53; eq. wt of NaOH = 40.

0.4 M eq of Na2CO3 = (53/1000) × 0.4 = 0.0212 g; 0.6 M eq of NaOH = (40/1000) × 0.6 = 0.024 g.

Ratio of weight of NaOH and Na2CO3 = 0.024/0.0212 = 1.132

Teacher's Note: Phenolphthalein sees NaOH plus half the carbonate (to bicarbonate); methyl orange sees both fully.

Exam Note: Set up two equations from the two indicators.

Multiple Choice Questions

Question MCQ 1. Metal ions like Ag+, Cu2+ etc. act as (a) Bronsted acid (b) Bronsted bases (c) Lewis acids (d) Lewis bases.

Solution.

Answer: (c) Lewis acids. Metal cations have vacant orbitals and accept electron pairs.

Teacher's Note: Cations accept lone pairs from ligands, so they are Lewis acids.

Exam Note: Cations = Lewis acids.

Question MCQ 2. With increase in temperature, ionic product of water (a) increases (b) decreases (c) remains unaffected (d) may increase or decrease

Solution.

Answer: (a) increases. Ionisation of water is endothermic, so Kw rises with temperature.

Teacher's Note: Endothermic ionisation: Le Chatelier shifts it forward on heating.

Exam Note: Kw rises with T.

Question MCQ 3. In the titration of a weak acid against a strong base, at the half-equivalence point (half-neutralisation) (a) pH = ½ pKa (b) pH = pKa (c) pH = 2pKa (d) None is correct.

Solution.

Answer: (b) pH = pKa. At half neutralisation [salt] = [acid], so Henderson gives pH = pKa.

Teacher's Note: Equal acid and salt makes the log term zero in Henderson's equation.

Exam Note: State [salt] = [acid].

Question MCQ 4. The pH of a 10−8 M of HCl in water is (a) 8 (b) −8 (c) between 7 and 8 (d) between 6 and 7.

Solution.

Answer: (d) between 6 and 7.. Water's own H+ (10−7) adds to 10−8: [H+] ≈ 1.1 × 10−7, pH ≈ 6.96.

Teacher's Note: A very dilute acid cannot make the solution basic; water's ionisation must be included.

Exam Note: Acid never gives pH above 7.

Question MCQ 5. At 90°C pure water has [H3O+] = 10−6 M. What is the value of Kw at this temperature? (a) 10−6 (b) 10−12 (c) 10−13 (d) 10−14

Solution.

Answer: (b) 10−12. Pure water has [H+] = [OH−], so Kw = (10−6)2 = 10−12.

Teacher's Note: In pure water [OH−] equals [H+]; square the given value.

Exam Note: Kw = [H+]2 here.

Question MCQ 6. Given that the dissociation constant for H2O is Kw = 1 × 10−14 mol2 litre−2, what is the pH of a 0.001 M KOH solution? (a) 10−11 (b) 10−3 (c) 3 (d) 11

Solution.

Answer: (d) 11. [OH−] = 10−3, [H3O+] = 10−11, pH = 11.

Teacher's Note: KOH is a strong base: pOH from [OH−], then subtract from 14.

Exam Note: Give pH 11, not [H+].

Question MCQ 7. Among the following hydroxides, the one which has the lowest value of Ksp at ordinary temperature (about 25°C) is (a) Mg(OH)2 (b) Ca(OH)2 (c) Ba(OH)2 (d) Be(OH)2.

Solution.

Answer: (d) Be(OH)2.. Solubility of group 2 hydroxides increases down the group; Be(OH)2 is least soluble, so it has the lowest Ksp.

Teacher's Note: Hydroxide solubility rises down group 2, so the top member has the smallest Ksp.

Exam Note: Trend: Be < Mg < Ca < Ba.

Question MCQ 8. The following equilibrium is established when hydrogen chloride is dissolved in acetic acid. HCl + CH3COOH ⇌ Cl− + CH3COOH2+. The set that characterises the conjugate acid base pair is (a) (HCl, CH3COOH) and (CH3COOH2+, Cl−) (b) (HCl, CH3COOH2+) and (CH3COOH, Cl−) (c) (CH3COOH2+, HCl) and (Cl−, CH3COOH) (d) (HCl, Cl−) and (CH3COOH2+, CH3COOH).

Solution.

Answer: (d) (HCl, Cl−) and (CH3COOH2+, CH3COOH).. HCl loses H+ to give Cl−; CH3COOH gains H+ to give CH3COOH2+.

Teacher's Note: A conjugate pair differs by exactly one proton: HCl/Cl− and CH3COOH2+/CH3COOH.

Exam Note: Pairs differ by one H+.

Question MCQ 9. Which of the following solutions will have pH close to 1.0? (a) 100 ml of (M/10) HCl + 100 ml of (M/10) NaOH (b) 55 ml of (M/10) HCl + 45 ml of (M/10) NaOH (c) 10 ml of (M/10) HCl + 90 ml of (M/10) NaOH (d) 75 ml of (M/5) HCl + 25 ml of (M/5) NaOH

Solution.

Answer: (d) 75 ml of (M/5) HCl + 25 ml of (M/5) NaOH. Option (d): 15 mmol HCl − 5 mmol NaOH = 10 mmol in 100 ml = 0.1 M H+, pH = 1. (a) is neutral (pH 7), (b) gives 0.01 M acid (pH 2), (c) is basic.

Teacher's Note: Find the excess strong acid in millimoles and divide by the total volume.

Exam Note: Compute excess H+ per option.

Question MCQ 10. Which of the following will occur if a 0.1 M solution of a weak acid is diluted to 0.01 M at constant temperature? (a) [H+] will decrease to 0.01 M (b) pH will decrease (c) percentage ionization will increase (d) Ka will increase.

Solution.

Answer: (c) percentage ionization will increase. On dilution of a weak acid percentage ionisation increases (α = √(Ka/c)); Ka is constant and pH rises.

Teacher's Note: Dilution raises degree of ionisation, yet [H+] still falls; Ka depends only on temperature.

Exam Note: Quote Ostwald dilution law.

Question MCQ 11. The pH of a 10−10 M NaOH solution is nearest to (a) 10 (b) 7 (c) 4 (d) −10.

Solution.

Answer: (b) 7. Water's own ionisation dominates at such low base concentration, so pH stays close to 7 (slightly above).

Teacher's Note: Extremely dilute base cannot move the pH far from that of pure water.

Exam Note: Answer near 7.

Question MCQ 12. The precipitate of CaF2 (Ksp = 1.7 × 10−10) is obtained when equal volumes of the following are mixed: (a) 10−4 M Ca2+ + 10−4 M F− (b) 10−2 M Ca2+ + 10−3 M F− (c) 10−5 M Ca2+ + 10−3 M F− (d) 10−3 M Ca2+ + 10−5 M F−.

Solution.

Answer: (b) 10−2 M Ca2+ + 10−3 M F−. In (b) ionic product = [Ca2+][F−]2 = 1.25 × 10−9 (after halving concentrations on mixing), which is greater than Ksp.

Teacher's Note: Halve both concentrations on mixing; fluoride is squared in the ionic product.

Exam Note: Compare ionic product with Ksp.

Question MCQ 13. A certain buffer solution contains equal concentration of X− and HX. The Ka for HX is 10−8. The pH of the buffer is (a) 3 (b) 8 (c) 11 (d) 14.

Solution.

Answer: (b) 8. pH = pKa + log([salt]/[acid]) = −log 10−8 + log 1 = 8.

Teacher's Note: Equal salt and acid makes pH equal to pKa.

Exam Note: pH = pKa.

Question MCQ 14. Which of the following is not a Lewis base? (a) Ag+ (b) H2O (c) CN− (d) NH3.

Solution.

Answer: (a) Ag+. Ag+ ion is a Lewis acid; the others have lone pairs to donate.

Teacher's Note: Lewis bases need a donatable lone pair; a cation does not have one.

Exam Note: Cation = Lewis acid.

Question MCQ 15. Which anion is the weakest base? (a) C2H5O− (b) NO3− (c) F− (d) CH3COO−

Solution.

Answer: (b) NO3−. Weak base has a strong conjugate acid; NO3− has the strongest conjugate acid HNO3.

Teacher's Note: Stronger the conjugate acid, weaker the base: HNO3 is strongest here.

Exam Note: Link to strongest conjugate acid.

Question MCQ 16. The correct order of increasing [H3O+] in the following aqueous solutions is (a) 0.01 M H2S < 0.01 M H2SO4 < 0.01 M NaCl < 0.01 M NaNO2 (b) 0.01 M NaCl < 0.01 M NaNO2 < 0.01 M H2S < 0.01 M H2SO4 (c) 0.01 M NaNO2 < 0.01 M NaCl < 0.01 M H2S < 0.01 M H2SO4 (d) 0.01 M H2S < 0.01 M NaNO2 < 0.01 M NaCl < 0.01 M H2SO4.

Solution.

Answer: (c) 0.01 M NaNO2 < 0.01 M NaCl < 0.01 M H2S < 0.01 M H2SO4. H2S is a weak acid, H2SO4 a strong acid, NaCl neutral, NaNO2 basic; hence NaNO2 < NaCl < H2S < H2SO4.

Teacher's Note: Classify each solution as basic, neutral, weakly acidic or strongly acidic first.

Exam Note: Rank: basic < neutral < weak acid < strong acid.

Question MCQ 17. The best explanation for the solubility of MnS in dil. HCl is that (a) solubility product of MnCl2 is less than that of MnS (b) concentration of Mn2+ is lowered by the formation of complex ions with chloride ions (c) concentration of sulphide ions is lowered by oxidation to free sulphur (d) concentration of sulphide ions is lowered by the formation of the weak H2S.

Solution.

Answer: (d) concentration of sulphide ions is lowered by the formation of the weak H2S.. MnS + 2HCl → MnCl2 + H2S; as H2S is a weak electrolyte, concentration of S2− ions is lowered.

Teacher's Note: Acid removes S2− as H2S, pulling the dissolution equilibrium forward.

Exam Note: Say: ionic product < Ksp.

Question MCQ 18. The pKa of HCN is 9.30. The pH of a solution prepared by mixing 2.5 moles of KCN and 2.5 moles of HCN in water and making upto total volume to 500 ml is (a) 9.30 (b) 7.30 (c) 10.30 (d) 8.30.

Solution.

Answer: (a) 9.30. pH = pKa + log([salt]/[acid]) = 9.30 + log(5.0/5.0) = 9.30.

Teacher's Note: Equal moles of KCN and HCN: the volume cancels in the ratio.

Exam Note: Volume does not matter.

Question MCQ 19. The solubility of AgI in NaI solution is less than that in pure water because of (a) AgI forms complex with NaI (b) of common ion effect (c) solubility product of AgI is less than that of NaI (d) the temperature of the solution decreases.

Solution.

Answer: (b) of common ion effect. Due to the common ion I− from NaI the equilibrium AgI ⇌ Ag+ + I− shifts backward.

Teacher's Note: Common ion lowers solubility while Ksp stays constant.

Exam Note: Name the common-ion effect.

Question MCQ 20. What is the percentage hydrolysis of NaCN in N/80 solution when the dissociation constant for HCN is 1.3 × 10−9 and Kw = 1.0 × 10−14? (a) 2.48 (b) 5.26 (c) 8.2 (d) 9.6

Solution.

Answer: (a) 2.48. h = √(Kw/(Kac)) = √(10−14/(1.3 × 10−9 × 1/80)) = 2.48 × 10−2, i.e. 2.48%.

Teacher's Note: Concentration is N/80 = 0.0125 M; use h = √(Kh/c).

Exam Note: Convert N/80 to 0.0125 M.

Question MCQ 21. The pH indicators are (a) salts of strong acids and strong bases (b) salts of weak acids and weak bases (c) either weak acids or weak bases (d) either strong acids or strong bases

Solution.

Answer: (c) either weak acids or weak bases. An indicator is a weak organic acid or base whose ionised and unionised forms differ in colour.

Teacher's Note: Weak acid/base indicators change colour as their ionisation shifts with pH.

Exam Note: Indicators are weak acids or bases.

Question MCQ 22. The solubility product of AgCl is 4.0 × 10−10 at 298 K. The solubility of AgCl in 0.04 m CaCl2 will be (a) 2.0 × 10−5 m (b) 1.0 × 10−4 m (c) 5.0 × 10−9 m (d) 2.2 × 10−4 m.

Solution.

Answer: (c) 5.0 × 10−9 m. [Cl−] = 0.04 × 2 = 0.08 m, so x(0.08) = 4 × 10−10 and x = 5.0 × 10−9 m.

Teacher's Note: CaCl2 gives two chloride ions per formula unit; double 0.04.

Exam Note: Use [Cl−] = 0.08.

Question MCQ 23. How much sodium acetate should be added to 0.1 m solution of CH3COOH to give a solution of pH 5.5 (pKa of CH3COOH = 4.5)? (a) 0.1 m (b) 0.2 m (c) 1.0 m (d) 10.0 m

Solution.

Answer: (c) 1.0 m. 5.5 = 4.5 + log([salt]/0.1) gives log[salt] = 0, so [CH3COONa] = 1 m.

Teacher's Note: pH exceeds pKa by 1, so salt is ten times the acid.

Exam Note: Ratio 10:1 gives 1.0 m.

Question MCQ 24. The strongest base of the following species is (a) NH2− (b) OH− (c) O2− (d) S2−

Solution.

Answer: (a) NH2−. Due to highest electron density on N in NH2−, it can accept protons most easily and hence is the strongest base.

Teacher's Note: Weakest conjugate acid (NH3) means strongest base.

Exam Note: Compare conjugate acid strengths.

Question MCQ 25. Which of the following sulphides has the lowest solubility product? (a) FeS (b) MnS (c) PbS (d) ZnS.

Solution.

Answer: (c) PbS. Sulphides of Group II (PbS) have low solubility product.

Teacher's Note: Group II sulphides such as PbS have much lower Ksp than group IV ones.

Exam Note: Group II sulphide is least soluble.

Question MCQ 26. The pH of a solution obtained by mixing 50 ml of 0.4 N HCl and 50 ml of 0.2 N NaOH is (a) −log 2 (b) −log 0.2 (c) 1.0 (d) 2.0.

Solution.

Answer: (c) 1.0. 20 meq HCl − 10 meq NaOH = 10 meq left in 100 ml, i.e. 0.1 N, so pH = 1.0.

Teacher's Note: Subtract milliequivalents then divide by total volume.

Exam Note: Excess acid 0.1 N gives pH 1.

Question MCQ 27. In a mixture of a weak acid and its salt, the ratio of acid to salt is increased ten fold. The pH of the solution (a) decreases by one (b) decreases by one tenth (c) increases by one (d) increases ten-fold.

Solution.

Answer: (a) decreases by one. pH = pKa + log([salt]/[acid]); with acid/salt tenfold larger, pH = pKa − 1.

Teacher's Note: pH depends on the logarithm of the ratio, so tenfold change shifts pH by one unit.

Exam Note: Log makes tenfold = one unit.

Question MCQ 28. If a neutral solution has pKw = 13.36 at 50°C, then pH of the solution is (a) 6.68 (b) 7 (c) 7.63 (d) None of these

Solution.

Answer: (a) 6.68. As [H+] = [OH−], pKw = 2 × pH, so pH = 13.36/2 = 6.68.

Teacher's Note: Neutrality at any temperature means pH = ½ pKw, not always 7.

Exam Note: pH = pKw/2.

Question MCQ 29. The solubility product of CuS, Ag2S and HgS are 10−31, 10−44 and 10−54 respectively. The solubilities of these sulphides are in the order (a) Ag2S > CuS > HgS (b) Ag2S > HgS > CuS (c) HgS > Ag2S > CuS (d) CuS > Ag2S > HgS.

Solution.

Answer: (a) Ag2S > CuS > HgS. s(CuS) = √Ksp = 10−15.5; Ag2S: Ksp = 4s3, s = (10−44/4)1/3 = (2.5)1/3 × 10−15; s(HgS) = 10−27.

Teacher's Note: Different salt types: convert Ksp to solubility (square root or cube root) before comparing.

Exam Note: Do not compare Ksp directly.

Question MCQ 30. If pKb for fluoride ion at 25°C is 10.83, the ionisation constant of hydrofluoric acid at this temperature is (a) 1.74 × 10−5 (b) 3.52 × 10−3 (c) 6.75 × 10−4 (d) 5.38 × 10−2.

Solution.

Answer: (c) 6.75 × 10−4. pKa + pKb = pKw = 14, so pKa = 3.17 and Ka = 6.76 × 10−4 (≈ 6.75 × 10−4).

Teacher's Note: For a conjugate pair pKa + pKb = 14 at 25°C.

Exam Note: Use pKa + pKb = 14.

Question MCQ 31. The solubility of A2X3 is y mol dm−3. Its solubility product is (a) 6y4 (b) 64y4 (c) 36y5 (d) 108y5.

Solution.

Answer: (d) 108y5.. A2X3 → 2A3+ + 3X2−; Ksp = (2y)2 × (3y)3 = 108y5.

Teacher's Note: Each ion concentration is stoichiometric multiple of y, raised to its coefficient.

Exam Note: Write (2y)2(3y)3.

Question MCQ 32. Which of the following can act both as Bronsted acid and Bronsted base? (a) Na2CO3 (b) OH− (c) HCO3− (d) NH3

Solution.

Answer: (c) HCO3−. HCO3− can accept a proton as well as give a proton.

Teacher's Note: Amphiprotic species have both a removable H and a lone pair.

Exam Note: HCO3− is amphiprotic.

Question MCQ 33. Which of the following statement(s) is (are) correct? (a) The pH of 1.0 × 10−8 M solution of HCl is 8 (b) The conjugate base of H2PO4− is HPO42− (c) Autoprotolysis constant of water increases with temperature (d) When a solution of a weak monoprotic acid is titrated against a strong base, at half neutralisation point, pH = (1/2)pKa.

Solution.

Answer: (b) The conjugate base of H2PO4− is HPO42−, (c) Autoprotolysis constant of water increases with temperature. (a) is wrong (an acid cannot give pH 8; it is about 6.98); (d) is wrong (pH = pKa at half neutralisation). (b) and (c) are correct.

Teacher's Note: Check each statement: dilute acid stays below 7; half-neutralisation gives pKa, not half of it.

Exam Note: Two correct options: (b) and (c).

Question MCQ 34. The concentration of [H+] and [OH−] of 0.1 M aqueous solution of 2% ionised weak acid is (ionic product of water = 1 × 10−14) (a) 0.02 × 10−3 M and 5 × 10−11 M (b) 1 × 10−3 M and 3 × 10−11 M (c) 2 × 10−3 M and 5 × 10−12 M (d) 3 × 10−2 M and 4 × 10−13 M.

Solution.

Answer: (c) 2 × 10−3 M and 5 × 10−12 M. [H+] = Cα = 0.1 × 0.02 = 2 × 10−3; [OH−] = 10−14/(2 × 10−3) = 5 × 10−12 M.

Teacher's Note: [H+] = cα; then [OH−] from Kw.

Exam Note: Convert 2% to 0.02.

Question MCQ 35. The strongest conjugate base is (a) NO3− (b) Cl− (c) SO42− (d) CH3COO−.

Solution.

Answer: (d) CH3COO−.. Strong base has a weak conjugate acid. Weakest conjugate acid is CH3COOH.

Teacher's Note: Weakest parent acid gives strongest conjugate base: CH3COOH is weak, others strong.

Exam Note: Strong acid means negligible conjugate base.

Question MCQ 36. The solubility of a saturated solution of calcium fluoride is 2 × 10−4 moles per litre. Its solubility product is (a) 12 × 10−2 (b) 14 × 10−4 (c) 22 × 10−11 (d) 32 × 10−12.

Solution.

Answer: (d) 32 × 10−12.. CaF2 → Ca2+ + 2F−; Ksp = s(2s)2 = 4s3 = 4 × (2 × 10−4)3 = 32 × 10−12.

Teacher's Note: CaF2 is an AB2 salt: Ksp = s(2s)2 = 4s3.

Exam Note: Write 4s3 with s cubed.

Question MCQ 37. A monoprotic acid in a 0.01 M solution ionises to 0.001%. Its ionisation constant is (a) 1.0 × 10−3 (b) 1.0 × 10−6 (c) 1.0 × 10−8 (d) 1.0 × 10−12.

Solution.

Answer: (d) 1.0 × 10−12.. α = 0.001/100 = 10−5; K = cα2 = 10−2 × (10−5)2 = 10−12.

Teacher's Note: Convert percent to fraction (10−5) before using Ka = cα2.

Exam Note: Percent to fraction first.

Question MCQ 38. What is the correct representation for the solubility product of SnS2? (a) [Sn2+][S2−]2 (b) [Sn4+][S2−]2 (c) [Sn2+][2S2−]2 (d) [Sn4+][2S2−]2.

Solution.

Answer: (b) [Sn4+][S2−]2. SnS2 ⇌ Sn4+ + 2S2−, so Ksp = [Sn4+][S2−]2.

Teacher's Note: Charge on tin is +4; coefficient becomes an exponent, never a multiplier inside the bracket.

Exam Note: Exponent, not coefficient.

Question MCQ 39. The solubility of CaCO3 in water is 3.05 × 10−4 moles/litre. Its solubility product will be (a) 6.1 × 10−4 (b) 9.3 (c) 3.05 × 10−4 (d) 9.3 × 10−8.

Solution.

Answer: (d) 9.3 × 10−8.. Ksp = s2 = (3.05 × 10−4)2 = 9.3 × 10−8.

Teacher's Note: CaCO3 is a 1:1 salt, so Ksp = s2.

Exam Note: Square the solubility.

Question MCQ 40. pH of water is 7. When a substance Y is dissolved in water, the pH becomes 13. The substance Y is a salt of (a) weak acid and weak base (b) strong acid and strong base (c) strong acid and weak base (d) weak acid and strong base.

Solution.

Answer: (d) weak acid and strong base.. pH = 13 means the solution is basic: a salt of a weak acid and a strong base hydrolyses to give OH−.

Teacher's Note: pH above 7 means anionic hydrolysis, i.e. weak-acid anion with strong-base cation.

Exam Note: Basic pH: weak acid, strong base.

Question MCQ 41. The pH of 0.1 M solution of the following salts increases in the order (a) NaCl < NH4Cl < NaCN < HCl (b) HCl < NH4Cl < NaCl < NaCN (c) NaCN < NH4Cl < NaCl < HCl (d) HCl < NaCl < NaCN < NH4Cl.

Solution.

Answer: (b) HCl < NH4Cl < NaCl < NaCN. NaCl is neutral (pH 7), NH4Cl slightly acidic (pH < 7), NaCN basic (pH > 7), HCl strongly acidic.

Teacher's Note: Rank by type: strong acid, acidic salt, neutral salt, basic salt.

Exam Note: List acidic to basic.

Question MCQ 42. Which one of the following is true for any diprotic acid, H2X? (a) Ka2 > Ka1 (b) Ka1 > Ka2 (c) Ka2 = 1/Ka1 (d) Ka2 = Ka1.

Solution.

Answer: (b) Ka1 > Ka2. For a diprotic acid Ka2 < Ka1, as the second proton leaves a negatively charged ion.

Teacher's Note: Removing H+ from an anion is harder than from the neutral acid.

Exam Note: Always Ka1 > Ka2.

Question MCQ 43. The conjugate acid of NH2− is (a) NH4+ (b) NH2OH (c) NH3 (d) N2H4.

Solution.

Answer: (c) NH3. NH2− + H+ → NH3.

Teacher's Note: Conjugate acid = base + one proton.

Exam Note: Add exactly one H+.

Question MCQ 44. Which of the following statements about pH and H+ ion concentration is incorrect? (a) A solution of the mixture of one equivalent each of CH3COOH and NaOH has a pH of 7 (b) pH of pure neutral water is not zero (c) A cold and concentrated H2SO4 has lower H+ ion concentration than a dilute solution of H2SO4 (d) Addition of one drop of concentrated HCl in NH4OH solution decreases pH of the solution.

Solution.

Answer: (a) A solution of the mixture of one equivalent each of CH3COOH and NaOH has a pH of 7. pH = 7 at the end point is only for strong acid with strong base; CH3COONa is basic, so (a) is incorrect.

Teacher's Note: The neutralisation product is a salt of weak acid and strong base, hence basic.

Exam Note: Hydrolysis makes it basic.

Question MCQ 45. Which of the following has lowest pH value? (a) 1 M HCl (b) 1 M NaOH (c) 1 M H2SO4 (d) 1 M C2H5OH.

Solution.

Answer: (c) 1 M H2SO4. Higher the [H+], lower is the pH; 1 M H2SO4 has highest [H+].

Teacher's Note: Dibasic strong acid supplies two H+ per molecule.

Exam Note: Count H+ per formula unit.

Question MCQ 46. Which solutions are mixed to form a buffer solution? (a) Strong acid and its salt with strong base (b) Strong acid and its salt with weak base (c) Weak acid and its salt with strong base (d) Weak acid and its salt with weak base.

Solution.

Answer: (c) Weak acid and its salt with strong base. An acidic buffer is a weak acid with its salt of a strong base (e.g. CH3COOH + CH3COONa).

Teacher's Note: Buffer needs a weak acid (or base) plus its conjugate partner.

Exam Note: Weak acid + its salt.

Question MCQ 47. Which solution will be strongly acidic? (a) When pOH = 4.5 (b) When pH = 0 (c) When pOH = 14 (d) Both (b) and (c).

Solution.

Answer: (d) Both (b) and (c).. pOH = 14 means pH = 0. Less the pH, more acidic is the solution.

Teacher's Note: pH + pOH = 14, so pOH 14 is the same as pH 0.

Exam Note: Convert pOH to pH.

Question MCQ 48. The pH of an aqueous solution of CH3COONa will be (a) 7 (b) 3 (c) 9 (d) 14.

Solution.

Answer: (c) 9. As the solution is basic (not very strongly basic), pH = 9.

Teacher's Note: Salt of weak acid and strong base is basic but only mildly.

Exam Note: Mildly basic, not 14.

Question MCQ 49. Which of the following is not a buffer? (a) H2CO3/HCO3− (b) CH3COOH/CH3COONa (c) NH4OH/NH4Cl (d) NH4OH/CH3COOH.

Solution.

Answer: (d) NH4OH/CH3COOH.. NH4OH and CH3COOH react to form a salt; the mixture is not a conjugate acid-base pair, so it is not a buffer.

Teacher's Note: A buffer needs a conjugate pair; weak base with weak acid just neutralise each other.

Exam Note: Needs a conjugate pair.

Question MCQ 50. For a buffer with equal amounts of the salt and the acid with Ka = 10−8, the pH is (a) 0 (b) 13 (c) 8 (d) 8 − log 2.

Solution.

Answer: (c) 8. With [salt] = [acid], pH = pKa = 8.

Teacher's Note: Equal amounts make the log term zero.

Exam Note: pH = pKa.

Question MCQ 51. Ionisation constant of CH3COOH is 1.7 × 10−5 and concentration of H+ ions is 3.4 × 10−4. Then initial concentration of CH3COOH molecules is (a) 3.4 × 10−4 (b) 3.4 × 10−3 (c) 6.8 × 10−3 (d) 1.7 × 10−3

Solution.

Answer: (c) 6.8 × 10−3. (a − 3.4 × 10−4) = (3.4 × 10−4)2/(1.7 × 10−5) = 6.8 × 10−3, so a = 6.8 × 10−3 + 3.4 × 10−4 ≈ 6.8 × 10−3 (nearest option).

Teacher's Note: For a weak acid Ka = [H+]2/(a − [H+]); solve for the initial a.

Exam Note: Rearrange Ka expression.

Question MCQ 52. In HS−, I−, R–NH2, NH3, order of proton accepting tendency will be (a) I− > NH3 > R–NH2 > HS− (b) NH3 > R–NH2 > HS− > I− (c) R–NH2 > NH3 > HS− > I− (d) HS− > R–NH2 > NH3 > I−.

Solution.

Answer: (c) R–NH2 > NH3 > HS− > I−. In R–NH2, the electron pair on N is most easily available for protonation because R is electron releasing group.

Teacher's Note: Alkylamines are stronger bases than ammonia; I− comes from a very strong acid.

Exam Note: Order by basic strength.

Question MCQ 53. Hydrogen ion concentration of an aqueous solution is 1 × 10−4 M. The solution is diluted with equal volume of water. Hydroxyl ion concentration of the resultant solution in terms of mol dm−3 is (a) 0.5 × 10−10 (b) 2 × 10−10 (c) 1 × 10−6 (d) 1 × 10−8

Solution.

Answer: (b) 2 × 10−10. After dilution [H+] = 10−4/2; [OH−] = 10−14/[H+] = 10−14 × 2/10−4 = 2 × 10−10 M.

Teacher's Note: Dilution halves [H+]; [OH−] doubles via Kw.

Exam Note: Halve H+, then use Kw.

Question MCQ 54. pH of a solution produced when an aqueous solution of pH 6 is mixed with an equal volume of an aqueous solution of pH 3 is about (a) 4.5 (b) 4.0 (c) 4.3 (d) 3.3

Solution.

Answer: (d) 3.3. [H+] = (10−6 + 10−3)/2 = 5.005 × 10−4; pH = 4 − 0.6994 = 3.3.

Teacher's Note: Average the [H+] values, never the pH values.

Exam Note: Average [H+], not pH.

Question MCQ 55. The pKa of a weak acid is 4.8. What should be the ratio of [Acid]/[Salt] of a buffer if pH = 5.8 is required? (a) 0.1 (b) 10 (c) 1 (d) 2

Solution.

Answer: (a) 0.1. log([Salt]/[Acid]) = 5.8 − 4.8 = 1.0, so [Salt]/[Acid] = 10 and [Acid]/[Salt] = 1/10 = 0.1.

Teacher's Note: The question asks acid/salt, the inverse of the Henderson ratio.

Exam Note: Invert salt/acid = 10.

Question MCQ 56. Which of the following would produce a buffer solution when mixed in equal volumes? (a) 1 M CH3COOH and 0.5 M NaOH (b) 1 M CH3COOH and 0.5 M HCl (c) 1 M NH4OH and 0.5 M NaOH (d) 1 M NH4Cl and 0.5 M HCl

Solution.

Answer: (a) 1 M CH3COOH and 0.5 M NaOH. V/2 c.c. of 0.5 M NaOH neutralises V/2 c.c. of 1 M CH3COOH to form sodium acetate; the unreacted acid remains alongside it, giving a buffer.

Teacher's Note: Half-neutralising a weak acid leaves equal acid and salt.

Exam Note: Weak acid plus half its equivalent of base.

Question MCQ 57. The pH of a 0.1 M aqueous solution of a weak acid (HA) is 3. What is its degree of dissociation? (a) 1% (b) 10% (c) 50% (d) 25%

Solution.

Answer: (a) 1%. [H+] = cα = 10−3, so 0.1 × α = 10−3 and α = 10−2 = 1%.

Teacher's Note: Convert pH to [H+] then divide by the concentration.

Exam Note: α = [H+]/c.

Question MCQ 58. The pH range of methyl red indicator is (a) 4.2 to 6.3 (b) 8.3 to 10.0 (c) 8.0 to 9.6 (d) 6.8 to 8.4

Solution.

Answer: (a) 4.2 to 6.3. Methyl red changes colour in the acidic range pH 4.2 to 6.3.

Teacher's Note: Methyl red suits strong acid with weak base titrations whose end point is below 7.

Exam Note: Range 4.2 to 6.3.

Question MCQ 59. For a sparingly soluble salt ApBq, the relationship of its solubility product (Ls) with its solubility (S) is (a) Ls = Sp+q · pp · qq (b) Ls = Sp+q · pq · qp (c) Ls = Spq · pp · qq (d) Ls = Spq (pq)p+q.

Solution.

Answer: (a) Ls = Sp+q · pp · qq. ApBq → pA+ + qB−, with concentrations pS and qS; Ksp = (pS)p(qS)q = Sp+qppqq.

Teacher's Note: Each ion concentration is coefficient times S, raised to the coefficient.

Exam Note: Exponents add: p + q.

Question MCQ 60. Identify the correct order of solubility of Na2S, CuS and ZnS in aqueous medium (a) CuS > ZnS > Na2S (b) ZnS > Na2S > CuS (c) Na2S > CuS > ZnS (d) Na2S > ZnS > CuS

Solution.

Answer: (d) Na2S > ZnS > CuS. Sulphides of alkali metals are soluble in water; sulphides of group II (CuS) have lower solubility than those of group IV radicals (ZnS).

Teacher's Note: Alkali metal sulphides dissolve; group II sulphides are less soluble than group IV.

Exam Note: Na2S soluble; CuS least.

Question MCQ 61. Which of the following has highest pH? (a) CH3COOK (b) Na2CO3 (c) NH4Cl (d) NaNO3

Solution.

Answer: (b) Na2CO3. NH4Cl is acidic, NaNO3 neutral, CH3COOK and Na2CO3 basic, and Na2CO3 is more basic (carbonic acid is weaker than acetic).

Teacher's Note: Salt of a weaker acid hydrolyses more, giving higher pH.

Exam Note: Compare acid strengths of parents.

Question MCQ 62. Which of the following is the buffer solution of strong acidic nature? (a) HCOOH + HCOO− (b) CH3COOH + CH3COO− (c) H2C2O4 + C2O42− (d) H3BO3 + BO33−

Solution.

Answer: (a) HCOOH + HCOO−. Out of the given acids, HCOOH is the strongest, so its buffer has the lowest pH.

Teacher's Note: The buffer with the lowest pKa has the lowest pH.

Exam Note: Strongest acid gives most acidic buffer.

Question MCQ 63. Water is a (a) protophobic solvent (b) protophilic solvent (c) amphiprotic solvent (d) aprotic solvent

Solution.

Answer: (c) amphiprotic solvent. Water is an amphiprotic solvent as it can accept protons as well as give protons.

Teacher's Note: Water behaves as acid and as base in different reactions.

Exam Note: Define amphiprotic.

Question MCQ 64. Among the following, the weakest base is (a) H− (b) CH3− (c) CH3O− (d) Cl−

Solution.

Answer: (d) Cl−. Cl− is the weakest base because it has the strongest conjugate acid, viz. HCl.

Teacher's Note: Strong conjugate acid implies very weak base.

Exam Note: Link to HCl.

Question MCQ 65. In the reaction I2 + I− → I3−, which is the Lewis base? (a) I2 (b) I− (c) I3− (d) None of these

Solution.

Answer: (b) I−. I− is the electron pair donor and hence is a Lewis base.

Teacher's Note: Donor of the lone pair is the Lewis base; I2 accepts it.

Exam Note: Donor = base.

Question MCQ 66. How do you differentiate between Fe3+ and Cr3+ in group III? (a) By taking excess of NH4OH (b) By increasing NH4+ ion concentration (c) By decreasing OH− ion concentration (d) Both (b) and (c).

Solution.

Answer: (d) Both (b) and (c).. In group III of analysis, addition of NH4Cl increases NH4+ ion concentration and decreases OH− ion concentration produced from NH4OH due to common ion effect. (Printed answer and hint; flagged for human check of the stem.)

Teacher's Note: Common ion NH4+ suppresses OH− and controls which hydroxides precipitate.

Exam Note: Cite common-ion effect of NH4Cl.

Question MCQ 67. Solubility of an MX2 type electrolyte is 0.5 × 10−4 mol L−1, then Ksp of the electrolyte is (a) 5 × 10−12 (b) 25 × 10−10 (c) 1 × 10−13 (d) 5 × 10−13

Solution.

Answer: (d) 5 × 10−13. MX2 ⇌ M2+ + 2X−; Ksp = s(2s)2 = 4s3 = 4 × (0.5 × 10−4)3 = 5 × 10−13.

Teacher's Note: MX2 gives Ksp = 4s3.

Exam Note: Cube the solubility, multiply by 4.

Question MCQ 68. In which of the following acid-base titration, pH is greater than 8 at the equivalence point? (a) Acetic acid versus ammonia (b) Acetic acid versus sodium hydroxide (c) Hydrochloric acid versus ammonia (d) Hydrochloric acid versus sodium hydroxide

Solution.

Answer: (b) Acetic acid versus sodium hydroxide. pH > 8 at the equivalence point means the salt formed on hydrolysis gives a basic solution, i.e. when acetic acid reacts with NaOH.

Teacher's Note: Weak acid versus strong base ends at a basic pH.

Exam Note: End-point salt must be basic.

Question MCQ 69. When rain is accompanied by a thunderstorm, the collected rain water will have pH value (a) slightly higher than that when the thunderstorm is not there (b) uninfluenced by the thunder storm (c) which depends on the amount of dust in air (d) slightly lower than that of rain water without thunder storm

Solution.

Answer: (d) slightly lower than that of rain water without thunder storm. Due to thunderstorm, temperature increases and nitrogen oxides form acids, i.e. [H+] increases, which means pH decreases.

Teacher's Note: Lightning forms oxides of nitrogen that make nitric acid in the rain.

Exam Note: Acid formation lowers pH.

Question MCQ 70. In the hydrolysis of a salt of weak acid and weak base, the hydrolysis constant Kh is equal to (a) Kw/Kb (b) Kw/Ka (c) Kw/(Ka · Kb) (d) Ka · Kb

Solution.

Answer: (c) Kw/(Ka · Kb). For salts of weak acid and weak base, Kh = Kw/(KaKb).

Teacher's Note: Both ions hydrolyse, so both Ka and Kb appear in the denominator.

Exam Note: Quote the formula.

Question MCQ 71. The solubility product of AgI at 25°C is 1.0 × 10−16 mol2 L−2. The solubility of AgI in 10−4 N solution of KI at 25°C is approximately (in mol L−1) (a) 1.0 × 10−16 (b) 1.0 × 10−12 (c) 1.0 × 10−10 (d) 1.0 × 10−8

Solution.

Answer: (b) 1.0 × 10−12. Total [I−] = 10−4 + 10−6 ≈ 10−4 M, so [Ag+] = 10−16/10−4 = 10−12 mol L−1.

Teacher's Note: The KI supplies nearly all the iodide, so solubility = Ksp/[I−].

Exam Note: Common-ion shortcut.

Question MCQ 72. Solubility of PbI2 is 0.0013 M. Then solubility product of PbI2 is (a) 2.2 × 10−9 (b) 8.8 × 10−9 (c) 6.8 × 10−6 (d) 8.8 × 10−6

Solution.

Answer: (b) 8.8 × 10−9. [Pb2+] = 1.3 × 10−3, [I−] = 2.6 × 10−3; Ksp = (1.3 × 10−3)(2.6 × 10−3)2 = 8.8 × 10−9.

Teacher's Note: Iodide concentration is twice the solubility and is squared.

Exam Note: Ksp = 4s3.

Question MCQ 73. A solution which is 10−3 M each in Mn2+, Fe2+, Zn2+ and Hg2+ is treated with 10−16 M sulphide ion. If Ksp of MnS, FeS, ZnS and HgS are 10−15, 10−23, 10−20 and 10−54 respectively, which one will precipitate first? (a) FeS (b) MgS (c) HgS (d) ZnS

Solution.

Answer: (c) HgS. The one with lowest value of Ksp, i.e. HgS, will precipitate out first.

Teacher's Note: Lowest Ksp is exceeded first as sulphide concentration builds up.

Exam Note: Lowest Ksp precipitates first.

Question MCQ 74. What is the pH of 0.01 M glycine solution? For glycine Ka1 = 4.5 × 10−3 and Ka2 = 1.7 × 10−10 at 298 K (a) 3.0 (b) 10.0 (c) 6.1 (d) 7.2

Solution.

Answer: (c) 6.1. Glycine is a zwitterion, so [H+] = √(Ka1Ka2) = √(7.65 × 10−13) ≈ 8.7 × 10−7 M; pH = 6.06 ≈ 6.1.

Teacher's Note: Amphoteric zwitterion: pH = ½(pKa1 + pKa2), independent of concentration.

Exam Note: Use geometric mean of Ka values.

Question MCQ 75. The rapid change of pH near the stoichiometric point of an acid-base titration is the basis of indicator detection. pH of the solution is related to ratio of concentration of conjugate acid (HIn) and the base (In−) forms of the indicator by the expression (a) log([In−]/[HIn]) = pKIn − pH (b) log([HIn]/[In−]) = pKIn − pH (c) log([HIn]/[In−]) = pH − pKIn (d) log([In−]/[HIn]) = pH − pKIn

Solution.

Answer: (d) log([In−]/[HIn]) = pH − pKIn. pH = pKIn + log([In−]/[HIn]) (Henderson form), so pH − pKIn = log([In−]/[HIn]).

Teacher's Note: Treat the indicator like a buffer: base form over acid form.

Exam Note: Henderson with In−/HIn.

Question MCQ 76. A weak acid HX has the dissociation constant 1 × 10−5 M. It forms a salt NaX on reaction with alkali. The degree of hydrolysis of 0.1 M solution of NaX is (a) 0.0001% (b) 0.01% (c) 0.1% (d) 0.15%

Solution.

Answer: (b) 0.01%. Kh = Kw/Ka = cα2, so 10−14/10−5 = 0.1α2, α = 10−4; % hydrolysis = 10−2 = 0.01.

Teacher's Note: Use Kh = Kw/Ka = ch2.

Exam Note: Convert h to percent.

Question MCQ 77. The molar solubility (in mol L−1) of a sparingly soluble salt MX4 is s. The corresponding solubility product is given by Ksp. s is given in terms of Ksp by the relation (a) s = (Ksp/128)1/4 (b) s = (128Ksp)1/4 (c) s = (256Ksp)1/5 (d) s = (Ksp/256)1/5

Solution.

Answer: (d) s = (Ksp/256)1/5. MX4 ⇌ M4+ + 4X−; Ksp = s × (4s)4 = 256s5, so s = (Ksp/256)1/5.

Teacher's Note: Fourth power on 4s gives 256; total power of s is five.

Exam Note: Ksp = 256s5.

Question MCQ 78. Which one of the following is not an amphoteric substance? (a) HNO3 (b) HCO3− (c) H2O (d) NH3

Solution.

Answer: (a) HNO3. HNO3 is a strong acid and cannot accept a proton, so it is not amphoteric.

Teacher's Note: Amphoteric species can both donate and accept a proton; strong acids only donate.

Exam Note: HNO3 only donates H+.

Question MCQ 79. The mixture of acetic acid and sodium acetate, the ratio of concentrations of the salt to the acid is increased ten times. Then pH of the solution (a) increases by one (b) decreases by one (c) decreases ten fold (d) increases ten fold

Solution.

Answer: (a) increases by one. Case 1: pH = pKa + log(a/b); case 2: pH = pKa + log(10a/b) = pKa + log(a/b) + 1.

Teacher's Note: Log of a tenfold ratio is exactly 1.

Exam Note: pH changes by one unit.

Question MCQ 80. Select the pKa value of the strongest acid from the following: (a) 1.0 (b) 3.0 (c) 2.0 (d) 4.5

Solution.

Answer: (a) 1.0. Higher the Ka value or lower the pKa value, stronger is the acid.

Teacher's Note: Strongest acid has the smallest pKa.

Exam Note: Smallest pKa wins.

Question MCQ 81. The pKa of acetic acid is 4.74. The concentration of CH3COOH is 0.01 M. The pH of CH3COOH is (a) 3.37 (b) 4.37 (c) 4.74 (d) 0.474

Solution.

Answer: (a) 3.37. [H+] = √(Kac); pH = ½(pKa − log c) = ½(4.74 + 2) = 3.37.

Teacher's Note: Weak acid: pH = ½(pKa − log c).

Exam Note: Apply the weak-acid formula.

Question MCQ 82. 50 ml of 0.1 M HCl and 50 ml of 0.2 M NaOH are mixed. The pH of the resulting solution is (a) 1.30 (b) 4.2 (c) 12.70 (d) 1.70

Solution.

Answer: (c) 12.70. 5 mmol HCl neutralises 5 of the 10 mmol NaOH; 5 mmol left in 100 ml = 0.05 M OH−, pOH = 1.301, pH = 12.699 ≈ 12.70.

Teacher's Note: Subtract millimoles, divide by 100 ml, then pOH to pH.

Exam Note: Excess base: pOH first.

Question MCQ 83. 0.365 g of HCl gas was passed through 100 cm3 of 0.2 M NaOH solution. The pH of the resulting solution would be (a) 1 (b) 5 (c) 8 (d) 9 (e) 13

Solution.

Answer: (e) 13. HCl = 0.01 mole; NaOH = 0.02 mole; NaOH left = 0.01 mole in 100 ml = 0.1 M, [H+] = 10−13, pH = 13.

Teacher's Note: Moles of HCl = 0.365/36.5; leftover NaOH sets the pH.

Exam Note: Leftover strong base fixes pH.

Question MCQ 84. The principal buffer present in human blood is (a) NaH2PO4 + Na2HPO4 (b) H3PO4 + NaH2PO4 (c) CH3COOH + CH3COONa (d) Na2HPO4 + Na3PO4 (e) H2CO3 + HCO3−

Solution.

Answer: (e) H2CO3 + HCO3−. The carbonic acid/bicarbonate system (H2CO3 + HCO3−) is the main buffer of blood.

Teacher's Note: Blood pH 7.4 is held mainly by the bicarbonate buffer.

Exam Note: Name the carbonic-bicarbonate pair.

Question MCQ 85. Degree of dissociation of NH4OH in water is 1.8 × 10−4, then hydrolysis constant of NH4Cl is (a) 1.8 × 10−5 (b) 1.8 × 10−10 (c) 5.55 × 10−5 (d) 5.55 × 10−10

Solution.

Answer: (d) 5.55 × 10−10. Kh = Kw/Kb = 10−14/(1.8 × 10−5) = 5.55 × 10−10. (The printed explanation uses Kb = 1.8 × 10−5; the stem as printed says "degree of dissociation 1.8 × 10−4", which looks like a misprint for the dissociation constant.)

Teacher's Note: Salt of strong acid and weak base: Kh = Kw/Kb.

Exam Note: Use Kh = Kw/Kb.

Additional Questions: Assertion-Reason Type Questions

Question Assertion-Reason 1. Assertion: Water is specially effective in screening the electrostatic interactions between the dissolved ions. Reason: The force of ionic interaction depends upon the dielectric constant of the solvent.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (a). Water has a high dielectric constant, which reduces the force between ions, so the reason explains the assertion.

Teacher's Note: High dielectric constant weakens ionic attraction; water screens ions well.

Exam Note: Link screening to dielectric constant.

Question Assertion-Reason 2. Assertion: The degree of ionization of water is small at 25°C, only about one of every 107 molecules in pure water is ionized at any instant. Reason: In pure water at 25°C the molar concentration of water is essentially constant.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (b). Ionisation is small because H2O is a very weak electrolyte; constant water concentration is true but does not explain it.

Teacher's Note: Reason is true but does not give the cause: water is a very weak electrolyte.

Exam Note: Both true; reason not the explanation.

Question Assertion-Reason 3. Assertion: The pKa of a weak acid becomes equal to pH of the solution at the mid-point of its titration. Reason: The molar concentrations of proton acceptor and proton donor become equal at mid point of a weak acid.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (a). pH = pKa + log([Salt]/[Acid]); at mid point [Salt] = [Acid], so pH = pKa.

Teacher's Note: Equal salt and acid at mid-point makes the log term zero.

Exam Note: Quote Henderson at half-neutralisation.

Question Assertion-Reason 4. Assertion: pH of HCl solution is less than that of acetic acid of the same concentration. Reason: In equimolar solutions, the number of titrable protons present in HCl is less than that present in acetic acid.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (c). Assertion is true: HCl is completely ionised, so it gives more H+. Reason is false: the number of titrable protons in HCl is the same as (not less than) in acetic acid; both are monoprotic.

Teacher's Note: HCl ionises fully; both acids have one titrable proton, so the reason fails.

Exam Note: Distinguish titrable protons from ionised protons.

Question Assertion-Reason 5. Assertion: Acetic acid is a weak acid. Reason: It has a weak conjugate base.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (c). Assertion is true. Reason is false: a weak acid has a strong conjugate base.

Teacher's Note: Weak acid has a relatively strong conjugate base, not weak.

Exam Note: Reason false: strong conjugate base.

Question Assertion-Reason 6. Assertion: pH value of HCN solution decreases when NaCN is added to it. Reason: NaCN provides a common ion CN− to HCN.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (d). Assertion is false: HCN ⇌ H+ + CN−; NaCN gives common CN− ions, the equilibrium shifts backward, [H+] decreases so that pH increases. Reason is true.

Teacher's Note: Common ion suppresses ionisation of HCN, so [H+] falls and pH rises.

Exam Note: Assertion false: pH increases.

Question Assertion-Reason 7. Assertion: pH of water increases with increase in temperature. Reason: Kw of water increases with increase in temperature.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (d). Assertion is false: pH of water decreases with increase in temperature. Reason is true.

Teacher's Note: Higher Kw gives higher [H+], so pH of neutral water falls.

Exam Note: Water stays neutral though pH falls.

Question Assertion-Reason 8. Assertion: When a small amount of strong acid is added to a buffer solution, its pH value does not change significantly. Reason: Buffer action of the buffer solution resists the change in pH when some acid is added to it.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (a). Both are true; the reason (buffer action) explains why the pH hardly changes.

Teacher's Note: A buffer neutralises added acid, so pH is nearly constant.

Exam Note: Name buffer action as the cause.

Question Assertion-Reason 9. Assertion: A buffer solution has a capacity to resist the change in pH value on addition of a small amount of acid or base to it. Reason: An aqueous solution of ammonium acetate can act as buffer.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (b). Both statements are true, but the property of ammonium acetate acting as a buffer does not explain the definition of a buffer.

Teacher's Note: Ammonium acetate (weak acid plus weak base salt) does buffer, but this is a separate fact.

Exam Note: Both true; reason does not explain.

Question Assertion-Reason 10. Assertion: Sb(III) is not precipitated as sulphide when in its alkaline solution H2S is passed. Reason: The concentration of S2− ion in alkaline medium is inadequate for precipitation.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (c). Assertion is taken as true (Sb(III) is precipitated as sulphide in acidic medium). Reason is false: in alkaline medium S2− ion concentration increases and does not decrease.

Teacher's Note: Group IIB sulphides precipitate in acidic medium; alkaline medium raises [S2−].

Exam Note: Reason false: alkali raises [S2−].

Question Assertion-Reason 11. Assertion: Addition of silver ions to a mixture of aqueous sodium chloride and sodium bromide solution will first precipitate AgBr rather than AgCl. Reason: Ksp of AgCl < Ksp of AgBr.
Choose: (a) both Assertion and Reason are true and the Reason is a correct explanation of the Assertion; (b) both are true but the Reason is not a correct explanation; (c) Assertion is true but Reason is false; (d) Assertion is false but Reason is true; (e) both are false.

Solution.

Answer: (c). Assertion is true. Reason is false: Ksp of AgCl > Ksp of AgBr; the salt with lower Ksp (AgBr) precipitates first.

Teacher's Note: Lower Ksp means its ionic product is reached first.

Exam Note: Reason false: AgCl Ksp is larger.

True/False Statements

Question True/False 1. The degree of ionization of a salt is directly proportional to its molar concentration.

Solution.

Answer: False. The degree of ionisation is inversely proportional to the square root of molar concentration (α = √(K/c)).

Teacher's Note: Ostwald dilution law: dilution raises α.

Exam Note: Quote α ∝ 1/√c.

Question True/False 2. A Lewis base is a substance which can donate a pair of electrons.

Solution.

Answer: True. This is the correct definition of a Lewis base.

Teacher's Note: Lewis base: electron-pair donor.

Exam Note: Define donor/acceptor correctly.

Question True/False 3. CO2 is a Lewis base.

Solution.

Answer: False. CO2 is a Lewis acid, since the carbon atom accepts an electron pair (e.g. from OH−).

Teacher's Note: Carbon in CO2 is electron-poor, so it accepts a pair from OH−.

Exam Note: Correct to Lewis acid.

Question True/False 4. The ionic product of water changes if a few drops of acid or base are added to it.

Solution.

Answer: False. The ionic product of water depends only on temperature; adding acid or base shifts [H+] and [OH−] but Kw is unchanged.

Teacher's Note: Kw is a constant at fixed temperature.

Exam Note: Say: depends only on temperature.

Question True/False 5. A solution with pH less than zero or greater than 14 cannot be prepared.

Solution.

Answer: True (as printed in the book key). Corrected: the book key lists this as true, but strictly it is false: concentrated solutions can have pH below 0 (e.g. 2 M HCl has pH about −0.3) or above 14 (e.g. 2 M NaOH has pH about 14.3). The 0 to 14 range holds for dilute solutions (1 M or less).

Teacher's Note: The 0 to 14 scale is a convenience for dilute solutions, not a limit.

Exam Note: Mention dilute solutions only.

Question True/False 6. More acidic is the solution, greater is its pH.

Solution.

Answer: False. More acidic the solution, lower (smaller) is its pH.

Teacher's Note: pH = −log[H+], so more H+ means lower pH.

Exam Note: Correct to lower pH.

Question True/False 7. The pH of 10−8 M HCl solution is 8.

Solution.

Answer: False. The pH of 10−8 M HCl is about 6.98 (below 7), because H+ from water must be included; an acid cannot give a pH above 7.

Teacher's Note: Add water's 10−7 M H+: total about 1.1 × 10−7 M.

Exam Note: Acid solution pH stays below 7.

Question True/False 8. Ionic product of water is always equal to 10−14.

Solution.

Answer: False. Kw = 10−14 only at 25°C; it increases with temperature (e.g. 10−12 at 90°C).

Teacher's Note: Kw depends on temperature.

Exam Note: Quote 25°C condition.

Question True/False 9. Phenolphthalein is not a suitable indicator for titration of HCl solution with Na2CO3 solution.

Solution.

Answer: True. Phenolphthalein changes colour only at the NaHCO3 stage; to complete the reaction to H2CO3 methyl orange is needed.

Teacher's Note: Phenolphthalein sees only half neutralisation of carbonate; methyl orange gives full end point.

Exam Note: Name methyl orange as suitable.

Question True/False 10. The solubility of PbI2 in water decreases if KI is added to it.

Solution.

Answer: True. KI supplies common ion I−, which shifts PbI2 ⇌ Pb2+ + 2I− backward.

Teacher's Note: Common-ion effect lowers solubility.

Exam Note: Name common-ion effect.

Fill in the Blanks

Question Fill in the Blanks 1. A compound whose aqueous solution or melt conducts electricity is called ..... .

Solution.

Answer: an electrolyte. Substances that conduct electricity in solution or melt are electrolytes.

Teacher's Note: Conduction by free ions defines an electrolyte.

Exam Note: One word: electrolyte.

Question Fill in the Blanks 2. The degree of dissociation of a salt is ..... proportional to ..... of molar concentration.

Solution.

Answer: inversely; square root. α ∝ 1/√c (Ostwald dilution law).

Teacher's Note: Ostwald dilution law links α and concentration.

Exam Note: Write α = √(K/c).

Question Fill in the Blanks 3. According to Bronsted-Lowry concept, an acid is a substance which can ..... whereas a base is a substance which can ..... .

Solution.

Answer: donate a proton; accept a proton. Bronsted-Lowry acids give H+ and bases take H+.

Teacher's Note: Acid donates H+, base accepts it.

Exam Note: State both parts.

Question Fill in the Blanks 4. A strong acid has a weak ..... base.

Solution.

Answer: conjugate. The conjugate base of a strong acid is weak.

Teacher's Note: Inverse relation between acid and conjugate base strength.

Exam Note: Write conjugate.

Question Fill in the Blanks 5. The sum of pH and ..... is equal to 14.

Solution.

Answer: pOH. pH + pOH = pKw = 14 at 25°C.

Teacher's Note: pKw relation at 25°C.

Exam Note: Write pOH.

Question Fill in the Blanks 6. The lower the pH, more ..... is the solution.

Solution.

Answer: acidic. Lower pH means higher [H+], i.e. more acidic.

Teacher's Note: pH = −log[H+].

Exam Note: Write acidic.

Question Fill in the Blanks 7. Solubility product is the product of the concentration of ions in a ..... solution.

Solution.

Answer: saturated. Ksp is defined for a saturated solution at equilibrium.

Teacher's Note: Ksp applies only at saturation.

Exam Note: Write saturated.

Question Fill in the Blanks 8. In the reaction I− + I2 → I3−, the Lewis acid is ..... .

Solution.

Answer: I2. I2 accepts an electron pair from I−, so it is the Lewis acid.

Teacher's Note: The pair acceptor is the acid.

Exam Note: Write I2.

Matching Type Questions

Question Matching 1. Match the entries of column A with appropriate entries of column B. Column A: (a) Titration of acetic acid with NaOH solution (b) Titration of Na2CO3 solution with HCl (c) Titration of NH4OH with acetic acid. Column B: (a) No suitable indicator (b) Phenolphthalein (c) Methyl orange

Solution.

Answer: (a)–(b), (b)–(c), (c)–(a). Acetic acid with NaOH ends at a basic pH, so phenolphthalein is used; Na2CO3 with HCl is titrated to the full end point with methyl orange; a weak acid with a weak base shows no sharp pH change, so no suitable indicator.

Teacher's Note: End-point pH decides the indicator: basic end point needs phenolphthalein, acidic needs methyl orange, weak-weak none.

Exam Note: Match indicator to the end-point pH.

Question Matching 2. Match the entries of column A with appropriate entries of columns B. Column A: (a) Copper sulphate solution (b) Sodium acetate solution (c) Potassium nitrate solution. Column B: (a) pH > 7 (b) pH < 7 (c) pH = 0

Solution.

Book answer: (a)–(b), (b)–(a), (c)–(c). CuSO4 is a salt of a weak base and strong acid, so pH < 7; CH3COONa is a salt of a weak acid and strong base, so pH > 7.

Corrected: KNO3 is a salt of a strong acid and a strong base, so its solution is neutral with pH = 7, not pH = 0. No option in column B (as printed) gives pH = 7; the book's pairing (c)–(c) is wrong.

Teacher's Note: Hydrolysis decides pH: weak-base cation acidic, weak-acid anion basic, strong-strong neutral.

Exam Note: Neutral salt: pH 7, no hydrolysis.

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math

Complete Math Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 8 Equilibrium Ii Part 3

Access the complete chapter-wise PDF for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 8 Equilibrium Ii Part 3. These structured Pradeep's KL Gogia Solutions solutions for Class 11 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your Class 11 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.