Pradeep's KL Gogia Solutions for Class 11 Chemistry: Chapter 07 Equilibrium I
Review structured textbook solutions for Class 11 Chemistry Chapter 07 Equilibrium I prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice Class 11 Chemistry Solutions: Chapter 07 Equilibrium I
Access the complete solution PDF for Class 11 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Equilibrium I - Part 1
Problems on Physical Equilibria
Example 1. If 0.200 g of iodine is stirred in 100 cm3 of water at 298 K till equilibrium is reached, what will be the mass of iodine found in solution and the mass that is left undissolved? After equilibrium is reached with 0.200 g of iodine and 100 cm3 of water, we add 150 cm3 of water to the system. How much iodine will be dissolved and how much will be left undissolved? What will be the concentration of iodine in solution? [I2(aq)] at equilibrium = 0.0011 mol L-1 at 298 K.
Solution. Solubility of iodine = 0.0011 mol L-1. 1000 cm3 of water dissolve 0.0011 mol × 254 g mol-1 = 0.2794 g ≈ 0.28 g, so 100 cm3 dissolve 0.028 g. I2 left undissolved = 0.200 - 0.028 = 0.172 g.
On adding 150 cm3 of water, total volume = 250 cm3. Since solubility is 0.28 g L-1, iodine that can dissolve in 250 cm3 = (0.28/1000) × 250 = 0.070 g. I2 left undissolved = 0.200 - 0.070 = 0.130 g.
Concentration of the solution = (0.070/254) × (1000/250) = 0.0011 mol L-1 (the solution is still saturated). Corrected: the book's working line uses 0.130 g, which is the undissolved mass; the dissolved mass 0.070 g gives the printed answer 0.0011 mol L-1.
Teacher's Note: Saturated solution concentration equals solubility, so it stays constant while undissolved solid remains; only the amount dissolved scales with volume.
Exam Note: Use dissolved mass, not undissolved, for concentration.
Example 2. During bottling, a carbonated beverage was made by saturating flavoured water at 0 °C with CO2 at a pressure of 4.0 atm. Later, the bottle was opened and the soft drink allowed to come to equilibrium at 25 °C with air containing CO2 at a pressure of 4.0 × 10-4 atm. Find the concentration of CO2 in the freshly bottled soda and in the soda after it had stood open and come to equilibrium. Henry's constants for aqueous solution of CO2 are: at 0 °C, k = 7.7 × 10-2 mol L-1 atm-1; at 25 °C, k = 3.2 × 10-2 mol L-1 atm-1.
Solution. By Henry's law, C = kp, where C is the gas concentration in solution, p its partial pressure and k Henry's constant.
(a) Freshly bottled drink: C = (7.7 × 10-2 mol L-1 atm-1)(4.0 atm) = 0.308 mol L-1.
(b) Opened drink at equilibrium with atmospheric CO2: C = (3.2 × 10-2 mol L-1 atm-1)(4.0 × 10-4 atm) = 1.28 × 10-5 mol L-1.
Teacher's Note: Use the k for each temperature; lower pressure sharply cuts solubility, so opened bottles go flat.
Exam Note: Match k to temperature; give mol L-1.
Example 3. Fill in the blanks (a to i) in the following table which contains the solubility data of oxygen in water at 299 K. Columns: Expt; Pressure of O2 (kPa); [O2(g)] / mol L-1; [O2(aq)]eq / mol L-1; [O2(aq)]eq / [O2(g)]eq.
| Expt | P / kPa | [O2(g)] | [O2(aq)]eq | Ratio |
|---|---|---|---|---|
| I | 106.4 | a | 0.0012 | b |
| II | c | 0.080 | d | 0.029 |
| III | 333.3 | 0.13 | e | 0.029 |
| IV | 466.1 | f | 0.0053 | g |
| V | 598.8 | h | i | 0.028 |
Solution. From PV = nRT, P = (n/V)RT = CRT, so C = P/RT.
Expt. I: a = 106.4 kPa / (8.314 kPa L K-1 mol-1 × 299 K) = 0.043 mol L-1; b = 0.0012/0.043 = 0.028.
Expt. II: d/0.080 = 0.029, so d = 0.0023 mol L-1; c = CRT = 0.080 × 8.314 × 299 = 198.9 kPa.
Expt. III: e/0.13 = 0.029, so e = 0.00377 mol L-1.
Expt. IV: f = 466.1/(8.314 × 299) = 0.187 mol L-1; g = 0.0053/0.187 = 0.028.
Expt. V: h = 598.8/(8.314 × 299) = 0.241 mol L-1; i = 0.028 × 0.241 = 0.0067 mol L-1.
Teacher's Note: The ratio [aq]/[g] is constant (about 0.028-0.029) at fixed temperature, which is the equilibrium-constant form of Henry's law.
Exam Note: Convert pressure to concentration using C = P/RT.
Solved Examples (Section 7.7)
Solved Example 1. At 700 K, the equilibrium constant Kp for the reaction 2SO3(g) ⇌ 2SO2(g) + O2(g) is 1.80 × 10-3 kPa. What is the numerical value of Kc in moles per litre for this reaction at the same temperature?
Solution. Here np = 3 moles, nr = 2 moles, so Δn = 3 - 2 = 1 mole. Kp = 1.80 × 10-3 kPa = 1.80 Pa = 1.80/105 bar = 1.80 × 10-5 bar.
R = 0.0831 L bar K-1 mol-1, T = 700 K. Using Kp = Kc(RT)Δn:
Kc = Kp/RT = (1.80 × 10-5 bar)/(0.0831 L bar K-1 mol-1 × 700 K) = 3.09 × 10-7 mol L-1.
Alternatively, Kc = 1.8 Pa/(8.314 J K-1 mol-1 × 700 K) = 1.8 N m-2/(8.314 N m mol-1 K-1 × 700 K) = 3.09 × 10-4 mol m-3 = 3.09 × 10-7 mol dm-3 or mol L-1.
Note: with respect to the standard state pressure of 1 bar, Kp = 1.80 × 10-5, i.e. dimensionless; similarly, with respect to the standard state concentration of 1 mol L-1, Kc = 3.09 × 10-7, i.e. dimensionless.
Teacher's Note: Convert Kp to bar or Pa first, then pick the R value in matching units before dividing by (RT)Δn.
Exam Note: Unit conversion of kPa and R earns marks.
Solved Example 2. At 773 K, the equilibrium constant Kc for the reaction N2(g) + 3H2(g) ⇌ 2NH3(g) is 6.02 × 10-2 L2 mol-2. Calculate the value of Kp at the same temperature.
Solution. Δng = 2 - 4 = -2. Kp = Kc(RT)Δn = 6.02 × 10-2 L2 mol-2 × (0.0821 L atm K-1 mol-1 × 773 K)-2 = 1.5 × 10-5 atm-2.
Teacher's Note: Δn is negative here, so Kp is smaller than Kc; the units atm-2 follow from Δn.
Exam Note: Count gaseous moles only; state units.
Problems for Practice
Practice Problem 1. Kp for the reaction N2O4(g) ⇌ 2NO2(g) is 0.157 atm at 27 °C and 1 atm pressure. Calculate Kc for the reaction.
Solution. Δn = np - nr = 2 - 1 = 1; Kc = Kp/(RT)Δn = 0.157 atm/(0.0821 L atm K-1 mol-1 × 300 K) = 6.37 × 10-3 mol L-1. (Ans. 6.37 × 10-3 mol L-1)
Teacher's Note: Convert 27 °C to 300 K before using RT; Δn = +1 so Kc = Kp/RT.
Exam Note: Convert °C to K.
Practice Problem 2. For the reaction A(g) + B(s) ⇌ C(g) + D(g), Kc = 49 mol dm-3 at 127 °C. Calculate Kp.
Solution. Δn = np - nr = 2 - 1 = 1 (gaseous species only; B is a solid). Kp = Kc(RT)Δn = (49 mol dm-3)(0.0821 dm3 atm K-1 mol-1 × 400 K) = 1.61 × 103 atm. (Ans. 1.61 × 103 atm)
Teacher's Note: The solid B is excluded from Δn; only gaseous moles count.
Exam Note: Ignore solids when finding Δn.
Practice Problem 3. Find out the value of Kc for each of the following equilibria from the value of Kp: (a) 2NOCl(g) ⇌ 2NO(g) + Cl2(g), Kp = 1.8 × 10-2 at 500 K; (b) CaCO3(s) ⇌ CaO(s) + CO2(g), Kp = 167 at 1073 K.
Solution. (a) Δng = 3 - 2 = 1, Kp = Kc(RT), so Kc = Kp/RT = 1.8 × 10-2/(0.0831 × 500) = 4.33 × 10-4 (R = 0.0831 bar L mol-1 K-1).
(b) Δng = 1 - 0 = 1, Kc = Kp/RT = 167/(0.0831 × 1073) = 1.87. (Ans. (a) 4.33 × 10-4 (b) 1.87)
Teacher's Note: In (b) only CO2 is gaseous, so Δng = 1; solids do not count.
Exam Note: Use R matching the pressure unit.
Problems on Law of Chemical Equilibrium
Example 1. For the reaction N2O4(g) ⇌ 2NO2(g), the concentrations of an equilibrium mixture at 298 K are [N2O4] = 4.50 × 10-2 mol/litre and [NO2] = 1.61 × 10-2 mol/litre. What is the value of the equilibrium constant?
Solution. K = [NO2]2/[N2O4]. Taking concentrations with respect to the standard state concentration of 1 mol L-1, K = (1.61 × 10-2)2/(4.50 × 10-2) = 5.76 × 10-3.
Teacher's Note: Square the product concentration because its coefficient is 2; relative to the 1 mol L-1 standard state K is dimensionless.
Exam Note: Write K expression before substituting.
Example 2. For an equilibrium reaction, the rate constants of the forward and the backward reaction are 2.38 × 10-4 and 8.15 × 10-5 respectively. Calculate the equilibrium constant for the reaction.
Solution. Equilibrium constant K = kf/kb = (2.38 × 10-4)/(8.15 × 10-5) = 2.92.
Teacher's Note: K is the ratio of forward to backward rate constants, since rates are equal at equilibrium.
Exam Note: State K = kf/kb first.
Example 3. In a reaction between H2 and I2 at a certain temperature, the amounts of H2, I2 and HI at equilibrium were found to be 0.45 mole, 0.39 mole and 3.0 moles respectively. Calculate the equilibrium constant for the reaction at the given temperature.
Solution. H2 + I2 ⇌ 2HI. Let the volume be V litres. [H2] = 0.45/V, [I2] = 0.39/V, [HI] = 3.0/V mol/litre. Kc = [HI]2/([H2][I2]) = (3.0)2/((0.45)(0.39)) = 51.28.
Teacher's Note: Here Δn = 0, so volume cancels and moles can be used directly in place of concentrations.
Exam Note: Show that V cancels since Δn = 0.
Example 4. Two moles of PCl5 were heated to 327 °C in a closed two litre vessel and when equilibrium was achieved, PCl5 was found to be 40% dissociated into PCl3 and Cl2. Calculate the equilibrium constants Kp and Kc for this reaction.
Solution. PCl5 ⇌ PCl3 + Cl2. PCl5 dissociated = 0.40 × 2 = 0.8 mole. At equilibrium: PCl5 = 1.2 mol, PCl3 = 0.8 mol, Cl2 = 0.8 mol. In 2 L: [PCl5] = 0.6, [PCl3] = 0.4, [Cl2] = 0.4 mol L-1. Kc = (0.4 × 0.4)/0.6 = 0.267. Kp = Kc(RT)Δn, Δn = 2 - 1 = 1, T = 327 + 273 = 600 K, R = 0.0821 L atm K-1 mol-1; Kp = 0.267 × 0.0821 × 600 = 13.15 atm.
Teacher's Note: Build the equilibrium table from % dissociation, divide by volume for Kc, then convert with (RT)Δn.
Exam Note: Convert °C to K; give Kp in atm.
Example 5. For the reaction N2(g) + 3H2(g) ⇌ 2NH3(g), the partial pressures of N2 and H2 are 0.80 and 0.40 atmosphere respectively at equilibrium. The total pressure of the system is 2.80 atmospheres. What is Kp for the above reaction?
Solution. p(NH3) = 2.80 - (0.80 + 0.40) = 1.60 atm. Taking pressures with respect to the standard state pressure of 1 atm, Kp = p2(NH3)/(p(N2) × p3(H2)) = (1.60)2/(0.80 × (0.40)3) = 50.0.
Teacher's Note: Get the missing partial pressure by subtracting from the total, then raise H2 pressure to the third power.
Exam Note: Cube the H2 pressure; do not forget p(NH3) from the total.
Example 6. 0.1 mole of PCl5 is vaporised in a litre vessel at 260 °C. Calculate the concentration of Cl2 at equilibrium, if the equilibrium constant for the dissociation of PCl5 is 0.0414.
Solution. Let [Cl2] at equilibrium be x mol/litre. PCl5 ⇌ PCl3 + Cl2: initial 0.1, 0, 0; at equilibrium (0.1 - x), x, x. Kc = x·x/(0.1 - x) = 0.0414, so x2 + 0.0414x - 0.00414 = 0. x = [-0.0414 ± √((0.0414)2 + 4 × 0.00414)]/2 = (-0.0414 + 0.135)/2 ≈ 0.0469 mol L-1 (the book prints 0.0468 from rounding). The negative root is rejected as meaningless. Thus [Cl2] at equilibrium is about 0.047 mol L-1.
Teacher's Note: Setting up the quadratic is the key; reject the negative root because concentration cannot be negative.
Exam Note: Solve quadratic; reject the negative root.
Example 7. Ethyl acetate (an ester) is formed by the reaction between ethanol and acetic acid according to the reaction CH3COOH(l) + C2H5OH(l) ⇌ CH3COOC2H5(l) + H2O(l). (a) Starting with 1.00 mol of acetic acid and 0.180 mol of ethanol at 293 K, the equilibrium mixture is found to contain 0.171 mol of ethyl acetate. Calculate the equilibrium constant. (b) Starting with 0.500 mol of ethanol and 1.000 mol of acetic acid again at 293 K, the mixture is found to contain 0.214 mol of ethyl acetate. Has equilibrium been attained? (N.C.E.R.T.)
Solution. (a) Initial: acid 1.00, alcohol 0.180. At equilibrium: acid = 1 - 0.171 = 0.829 mol; alcohol = 0.180 - 0.171 = 0.009 mol; ester = 0.171 mol; water = 0.171 mol. Kc = (0.171/V)(0.171/V)/((0.829/V)(0.009/V)) = 3.92.
(b) Initial: acid 1.000, alcohol 0.500. Mixture: acid = 1 - 0.214 = 0.786 mol; alcohol = 0.500 - 0.214 = 0.286 mol; ester = water = 0.214 mol. Reaction quotient Qc = (0.214)(0.214)/((0.786)(0.286)) = 0.204. As Qc ≠ Kc (3.92), equilibrium has not been attained.
Teacher's Note: Δn = 0 so volume cancels; comparing Q with K tells if the mixture has reached equilibrium.
Exam Note: Compare Q with K to judge equilibrium.
Example 8. The equilibrium constant at 278 K for Cu(s) + 2Ag+(aq) ⇌ Cu2+(aq) + 2Ag(s) is 2.0 × 1015. In a solution in which copper has displaced some silver ions from the solution, the concentration of Cu2+ ions is 1.8 × 10-2 mol L-1 and the concentration of Ag+ ions is 3.0 × 10-9 mol L-1. Is this system at equilibrium?
Solution. K = [Cu2+(aq)][Ag(s)]2/([Cu(s)][Ag+(aq)]2); by convention [Ag(s)] = 1 and [Cu(s)] = 1, so K = [Cu2+]/[Ag+]2. With respect to the standard state concentration of 1 mol L-1: K = (1.8 × 10-2)/(3.0 × 10-9)2 = 2 × 1015, which is the same as for the reaction at equilibrium. Hence the given system is in equilibrium.
Teacher's Note: Pure solids are taken as 1; the square on [Ag+] is the trap.
Exam Note: Square [Ag+]; ignore the solids.
Example 9. For the reaction CaCO3(s) ⇌ CaO(s) + CO2(g) at 1073 K, the pressure of CO2 is found to be 2.5 × 104 Pa. What is the equilibrium constant of this reaction at 1073 K?
Solution. With reference to the standard state pressure of 1 bar, i.e. 105 Pa: Kp = p(CO2)/p° = (2.5 × 104 Pa)/(105 Pa) = 0.25.
Teacher's Note: Only CO2 appears in Kp; divide by the 1 bar standard pressure to get a dimensionless value.
Exam Note: Convert Pa to bar before stating Kp.
Example 10. AB2(g) dissociates as AB2(g) ⇌ AB(g) + B(g). If the initial pressure is 500 mm of Hg and the total pressure at equilibrium is 700 mm of Hg, calculate Kp for the reaction.
Solution. Let the decrease in pressure of AB2 be p mm. At equilibrium: AB2 = (500 - p), AB = p, B = p. Total = 500 + p = 700, so p = 200 mm. p(AB2) = 300 mm, p(AB) = 200 mm, p(B) = 200 mm. Kp = (200 × 200)/300 = 133.3 mm. With respect to the standard state pressure of 1 bar (0.987 atm, i.e. 750 mm), Kp = 133.3/750 = 0.178.
Teacher's Note: Total pressure rises by the amount dissociated, because one mole of gas gives two.
Exam Note: Total pressure = 500 + p, not 500 - p.
Example 11. Under what pressure must an equimolar mixture of PCl3 and Cl2 be placed at 250 °C in order to obtain PCl5 at 1 atm? (Kp for dissociation of PCl5 = 1.78)
Solution. Let the partial pressure of PCl3 at equilibrium = p atm; then that of Cl2 = p atm, and of PCl5 = 1 atm. For PCl5 ⇌ PCl3 + Cl2: Kp = 1.78 = (p × p)/1 = p2, so p = √1.78 = 1.33 atm. Total pressure = 1 + 1.33 + 1.33 = 3.66 atm (≈ 3.67 with unrounded p = 1.334).
Teacher's Note: Use the dissociation Kp as given; equimolar PCl3 and Cl2 have equal partial pressures.
Exam Note: Add all three partial pressures for total.
Example 12. At 448 °C, the equilibrium constant (Kc) for the reaction H2(g) + I2(g) ⇌ 2HI(g) is 50.5. Predict the direction in which the reaction will proceed to reach equilibrium at 448 °C, if we start with 2.0 × 10-2 mol of HI, 1.0 × 10-2 mol of H2 and 3.0 × 10-2 mol of I2 in a 2.0 L container.
Solution. Initial concentrations: [HI] = 2.0 × 10-2/2 = 1.0 × 10-2, [H2] = 0.5 × 10-2, [I2] = 1.5 × 10-2 mol L-1. Q = [HI]2/([H2][I2]) = (1.0 × 10-2)2/((0.5 × 10-2)(1.5 × 10-2)) = 1.3. Since Q < K, the reaction will proceed in the forward direction to attain equilibrium so that Q becomes equal to K.
Teacher's Note: Convert moles to concentrations, compute Q, then compare: Q smaller than K means forward shift.
Exam Note: Q < K: forward direction.
Example 13. The degree of dissociation of PCl5 at a certain temperature and atmospheric pressure is 0.2. Calculate the pressure at which it will be half (50%) dissociated at the same temperature.
Solution. Let α be the degree of dissociation. PCl5 ⇌ PCl3 + Cl2: initial 1, 0, 0; at equilibrium (1 - α), α, α; total moles = 1 + α. With total pressure P, p(PCl3) = p(Cl2) = αP/(1 + α), p(PCl5) = (1 - α)P/(1 + α). Kp = α2P/(1 - α2). At P = 1 atm and α = 0.2: Kp = (0.2)2 × 1/(1 - (0.2)2) = 0.04/0.96 = 0.0417. When α = 0.5 at total pressure P′: 0.0417 = (0.5)2P′/(1 - (0.5)2) = (0.25/0.75)P′, so P′ = 0.125 atm.
Teacher's Note: Kp depends only on temperature; reuse it with a new α. Lower pressure favours dissociation.
Exam Note: Total moles = 1 + α; Kp = α2P/(1 - α2).
Example 14. Determine the concentration of CO2 which will be in equilibrium with 2.5 × 10-2 mol L-1 of CO at 100 °C for the reaction FeO(s) + CO(g) ⇌ Fe(s) + CO2(g), Kc = 5.0.
Solution. Kc = [CO2]/[CO], i.e. 5 = [CO2]/(2.5 × 10-2), so [CO2] = 5 × 2.5 × 10-2 = 12.5 × 10-2 mol L-1.
Teacher's Note: Solids FeO and Fe are left out, so Kc is just the CO2 to CO ratio.
Exam Note: Omit solids from Kc.
Example 15. At a certain temperature and a total pressure of 105 Pa, iodine vapour contains 40% by volume of iodine atoms [I2(g) ⇌ 2I(g)]. Calculate Kp for the equilibrium. (N.C.E.R.T.)
Solution. Partial pressure of I atoms: p(I) = (40/100) × 105 Pa = 0.4 × 105 Pa. Partial pressure of I2: p(I2) = (60/100) × 105 Pa = 0.60 × 105 Pa. Kp = p2(I)/p(I2) = (0.4 × 105)2/(0.60 × 105) = 2.67 × 104 Pa.
Teacher's Note: Percentage by volume equals mole fraction for gases, so multiply by total pressure to get partial pressures.
Exam Note: Volume % = mole %; state unit Pa.
Example 16. The equilibrium constant for the reaction H2(g) + Br2(g) ⇌ 2HBr(g) at 1024 K is 1.6 × 105. Find the equilibrium pressure of all gases if 10.0 bar of HBr is introduced into a sealed container at 1024 K. (N.C.E.R.T.)
Solution. For 2HBr(g) ⇌ H2(g) + Br2(g), K = 1/(1.6 × 105). Initial HBr = 10 bar; let p bar of HBr decompose. At equilibrium H2 = Br2 = p/2 and HBr = 10 - p. Kp = (p/2)(p/2)/(10 - p)2 = 1/(1.6 × 105), i.e. p2/(4(10 - p)2) = 1/(1.6 × 105). Taking square roots: p/(2(10 - p)) = 1/(4 × 102), so 4 × 102p = 2(10 - p), 402p = 20, p = 4.98 × 10-2 bar. Hence at equilibrium p(H2) = p(Br2) = p/2 = 2.5 × 10-2 bar and p(HBr) = 10 - p ≈ 10 bar.
Teacher's Note: Reversing the reaction inverts K; tiny K means 10 - p is about 10.
Exam Note: Invert K when reversing the reaction.
Example 17. At 1127 K and 1 atm pressure, a gaseous mixture of CO and CO2 in equilibrium with solid carbon has 90.55% CO by mass in the reaction C(s) + CO2(g) ⇌ 2CO(g). Calculate Kc for this reaction at the above temperature. (N.C.E.R.T.)
Solution. If the total mass of the mixture is 100 g: CO = 90.55 g and CO2 = 100 - 90.55 = 9.45 g. Moles of CO = 90.55/28 = 3.234; moles of CO2 = 9.45/44 = 0.215. p(CO) = (3.234/(3.234 + 0.215)) × 1 atm = 0.938 atm; p(CO2) = (0.215/3.449) × 1 = 0.062 atm. Kp = (p(CO))2/p(CO2) = (0.938)2/0.062 = 14.19. Δng = 2 - 1 = 1, so Kc = Kp/RT = 14.19/(0.0821 × 1127) = 0.153. (Using unrounded pressures gives Kp ≈ 14.06 and Kc ≈ 0.152; the printed values are kept.)
Teacher's Note: Convert mass percentages to moles, then to partial pressures; solid carbon is excluded from K.
Exam Note: Mass to moles to partial pressure, then Kc = Kp/RT.
Problems for Practice (Law of Chemical Equilibrium)
Practice Problem 1. In a reaction between hydrogen and iodine, 6.34 moles of hydrogen and 4.02 moles of iodine are found to be in equilibrium with 42.85 moles of hydrogen iodide at 350 °C. Calculate the equilibrium constant.
Solution. Kc = [HI]2/([H2][I2]) = (42.85)2/(6.34 × 4.02) = 72.04 (volume cancels as Δn = 0). Ans. 72.042.
Teacher's Note: Volume cancels because moles of gas do not change; moles can replace concentrations.
Exam Note: Show the Kc expression, then substitute.
Practice Problem 2. Calculate the equilibrium constants Kp and Kc for the reaction CO(g) + ½O2(g) ⇌ CO2(g). Given that the partial pressures at equilibrium in a vessel at 3000 K are p(CO) = 0.4 atm, p(CO2) = 0.6 atm and p(O2) = 0.2 atm.
Solution. Kp = p(CO2)/(p(CO) × p(O2)1/2) = 0.6/(0.4 × (0.2)1/2) = 3.354. Δn = 1 - 1.5 = -0.5, so Kc = Kp(RT)0.5 = 3.354 × (0.0821 × 3000)1/2 = 52.64. Ans. Kp = 3.354, Kc = 52.64.
Teacher's Note: The ½ coefficient becomes a power of 1/2 and makes Δn = -½.
Exam Note: Use Δn = -0.5 when converting.
Practice Problem 3. 1.5 moles of PCl5 are heated at a certain temperature in a closed vessel of 4 litre capacity. At the equilibrium point, PCl5 is 35% dissociated into PCl3 and Cl2. Calculate the equilibrium constant Kc.
Solution. Dissociated = 0.35 × 1.5 = 0.525 mol. At equilibrium: PCl5 = 0.975 mol, PCl3 = Cl2 = 0.525 mol; concentrations in 4 L: 0.244, 0.131, 0.131 mol L-1. Kc = (0.131)2/0.244 = 0.071. Ans. 0.071.
Teacher's Note: Because Δn = 1, volume matters: divide moles by 4 L before applying Kc.
Exam Note: Use concentrations, not moles, when Δn ≠ 0.
Practice Problem 4. The equilibrium composition for the reaction PCl3 + Cl2 ⇌ PCl5 is: PCl3 0.20, Cl2 0.10, PCl5 0.40 moles/litre. What will be the equilibrium concentration of PCl5 on adding 0.10 mole of Cl2 at the same temperature?
Solution. Kc = 0.40/(0.20 × 0.10) = 20. After adding 0.10 mol L-1 Cl2, [Cl2] = 0.20 and let x mol L-1 of PCl3 react: (0.40 + x)/((0.20 - x)(0.20 - x)) = 20, giving 20x2 - 9x + 0.4 = 0, x = 0.05. [PCl5] = 0.40 + 0.05 = 0.45 mol L-1. Ans. 0.45 mol L-1.
Teacher's Note: Kc is unchanged by adding Cl2; the system shifts forward and re-establishes the same ratio.
Exam Note: Find Kc first; it stays constant.
Practice Problem 5. If 1 mole of acetic acid and 1 mole of ethyl alcohol are mixed and the reaction proceeds to equilibrium, the concentrations of acetic acid and water are found to be 1/3 and 2/3 mole respectively. If 1 mole of ethyl acetate and 3 moles of water are mixed, how much ester is present when equilibrium is reached?
Solution. CH3COOH + C2H5OH ⇌ CH3COOC2H5 + H2O. First case at equilibrium: acid 1/3, alcohol 1/3, ester 2/3, water 2/3 mol, so Kc = (2/3)(2/3)/((1/3)(1/3)) = 4. Second case: let x mol of ester hydrolyse: ester = 1 - x, water = 3 - x, acid = alcohol = x. (1 - x)(3 - x)/x2 = 4, so 3x2 + 4x - 3 = 0, x = 0.535. Ester = 1 - 0.535 = 0.465 mol. Ans. 0.465 mole.
Teacher's Note: Get K from experiment one, then apply it to the reverse start.
Exam Note: Reaction runs backward from ester and water.
Practice Problem 6. Calculate the degree of dissociation of HI at 450 °C if the equilibrium constant for the dissociation reaction is 0.263.
Solution. 2HI ⇌ H2 + I2. If α is the degree of dissociation, K = (α/2)(α/2)/(1 - α)2 = α2/(4(1 - α)2) = 0.263, so α/(1 - α) = 2√0.263 = 1.026, giving α = 0.506 ≈ 0.51. Ans. 0.51.
Teacher's Note: Each HI that dissociates gives half a mole each of H2 and I2, hence the α/2 terms.
Exam Note: Write moles as 1 - α, α/2, α/2.
Practice Problem 7. One mole of pure ammonia was injected into a one litre flask at a certain temperature. The equilibrium mixture was then analysed and found to contain 0.30 mole of H2. Calculate (i) the concentration of N2 and (ii) the concentration of NH3 at equilibrium.
Solution. 2NH3 ⇌ N2 + 3H2. H2 = 0.30 mol means N2 = 0.30/3 = 0.10 mol, and NH3 decomposed = 0.20 mol. (i) [N2] = 0.10 mol L-1; (ii) [NH3] = 1 - 0.20 = 0.80 mol L-1. Ans. (i) 0.10 mol L-1 (ii) 0.80 mol L-1.
Teacher's Note: Use the 3:1:2 stoichiometry to link H2 formed to N2 formed and NH3 used.
Exam Note: Link amounts through the balanced equation.
Practice Problem 8. How much PCl5 must be added to a one litre vessel at 250 °C in order to obtain a concentration of 0.1 mole of chlorine? Equilibrium constant for the dissociation of PCl5 at 250 °C is 0.0414.
Solution. PCl5 ⇌ PCl3 + Cl2. At equilibrium [Cl2] = [PCl3] = 0.1, so 0.0414 = (0.1 × 0.1)/[PCl5] and [PCl5] = 0.2415 mol. Total PCl5 added = 0.2415 + 0.1 = 0.3415 mol. Ans. 0.3415 mole.
Teacher's Note: Add the amount left at equilibrium to the amount that dissociated.
Exam Note: Initial = equilibrium + dissociated.
Practice Problem 9. In an experiment, 2 moles of HI are taken into an evacuated 10.0 litre vessel at 720 K. The equilibrium constant equals 0.0156 for the gaseous reaction 2HI(g) ⇌ H2(g) + I2(g). Calculate the amounts of HI, H2 and I2 at equilibrium.
Solution. Let x mol of H2 and of I2 form; HI = 2 - 2x. Kc = (x/10)2/((2 - 2x)/10)2 = x2/(2 - 2x)2 = 0.0156, so x/(2 - 2x) = 0.125, x = 0.2. HI = 1.6 mol, H2 = 0.2 mol, I2 = 0.2 mol. Ans. HI = 1.6 mole, H2 = 0.2 mole, I2 = 0.2 mole.
Teacher's Note: Δn = 0 so volume cancels; take a square root of both sides to avoid a quadratic.
Exam Note: Square-root both sides to simplify.
Practice Problem 10. For the reaction Cu(s) + 2Ag+(aq) ⇌ Cu2+(aq) + 2Ag(s), fill in the blanks in the following table for the three solutions at equilibrium. Solution 1: [Cu2+] = (a), [Ag+] = 1.0 × 10-9 mol/litre, K = 2.0 × 1015 litre/mol. Solution 2: [Cu2+] = 2.0 × 10-7, [Ag+] = 1.0 × 10-11, K = (b). Solution 3: [Cu2+] = 2.0 × 10-2, [Ag+] = (c), K = 2.0 × 1015.
Solution. K = [Cu2+]/[Ag+]2. (a) [Cu2+] = 2.0 × 1015 × (1.0 × 10-9)2 = 2.0 × 10-3 mol L-1. (b) K = 2.0 × 10-7/(1.0 × 10-11)2 = 2.0 × 1015 L mol-1. (c) [Ag+] = √(2.0 × 10-2/2.0 × 1015) = 3.16 × 10-9 mol L-1. Ans. (a) 2.0 × 10-3 mol L-1, (b) 2.0 × 1015, (c) 3.16 × 10-9 mol L-1.
Teacher's Note: Solids drop out of K; Ag+ is squared, so (c) needs a square root.
Exam Note: Take the square root for [Ag+].
Practice Problem 11. When PCl5 is heated in a closed vessel at 575 K, the total pressure is found to be 1 atm and partial pressure of Cl2 is found to be 0.324 atm. Calculate the equilibrium constant (Kp) for the decomposition reaction.
Solution. PCl5 ⇌ PCl3 + Cl2: p(PCl3) = p(Cl2) = 0.324 atm, p(PCl5) = 1 - 0.648 = 0.352 atm. Kp = (0.324)2/0.352 = 0.298. Ans. 0.298.
Teacher's Note: PCl3 and Cl2 form in equal amounts, so their partial pressures are equal; PCl5 is the remainder.
Exam Note: Subtract both product pressures from total.
Practice Problem 12. In the dissociation of HI, 20% HI is dissociated at equilibrium at a certain temperature. Calculate Kp for the reaction HI(g) ⇌ ½H2(g) + ½I2(g).
Solution. α = 0.2: HI = 0.8, H2 = 0.1, I2 = 0.1 mol (total 1 mol). K = (0.1)1/2(0.1)1/2/0.8 = 0.1/0.8 = 0.125. Since Δn = 0, Kp = Kc = 0.125. Ans. Kp = Kc = 0.125.
Teacher's Note: With ½ coefficients the powers multiply back to the first power; Δn = 0 so Kp equals Kc.
Exam Note: State Kp = Kc when Δn = 0.
Practice Problem 13. A reaction mixture containing N2 at 0.50 atm, H2 at 3.0 atm and NH3 at 0.50 atm is heated to 450 °C. In which direction will the reaction N2(g) + 3H2(g) ⇌ 2NH3(g) go if Kp is 4.28 × 10-5?
Solution. Qp = p2(NH3)/(p(N2) × p3(H2)) = (0.50)2/(0.50 × (3.0)3) = 0.0185. Since Qp > Kp (4.28 × 10-5), the reaction goes in the backward direction. Ans. Backward direction.
Teacher's Note: Compute Qp with the given pressures and compare with Kp; Q above K means reverse shift.
Exam Note: Q > K: backward direction.
Practice Problem 14. Reaction between nitrogen and oxygen takes place as follows: 2N2(g) + O2(g) ⇌ 2N2O(g). If a mixture of 0.482 mol of N2 and 0.933 mol of O2 is placed in a reaction vessel of volume 10 L and allowed to form N2O at a temperature for which Kc = 2.0 × 10-37, determine the composition of the equilibrium mixture. (N.C.E.R.T.)
Solution. Initial [N2] = 0.0482, [O2] = 0.0933 mol L-1. Kc is extremely small, so N2 and O2 are essentially unchanged. [N2O]2 = Kc[N2]2[O2] = 2.0 × 10-37 × (0.0482)2 × 0.0933 = 4.33 × 10-41, so [N2O] = 6.6 × 10-21 mol L-1. Ans. [N2] = 0.0482, [O2] = 0.0933, [N2O] = 6.6 × 10-21 mol L-1.
Teacher's Note: A tiny K means negligible conversion, so reactant concentrations are taken as initial values.
Exam Note: Neglect the change when K is tiny.
Practice Problem 15. Nitric oxide reacts with bromine and gives nitrosyl bromide as per reaction given below: 2NO(g) + Br2(g) ⇌ 2NOBr(g). When 0.087 mol of NO and 0.0437 mol of Br2 are mixed in a closed container at constant temperature, 0.0518 mol of NOBr is obtained at equilibrium. Calculate equilibrium amount of nitric oxide and bromine. (N.C.E.R.T.)
Solution. NOBr formed = 0.0518 mol, which uses 0.0518 mol NO and 0.0259 mol Br2. NO at equilibrium = 0.087 - 0.0518 = 0.0352 mol; Br2 = 0.0437 - 0.0259 = 0.0178 mol. Ans. NO = 0.0352 mol, Br2 = 0.0178 mol.
Teacher's Note: Use the 2:1:2 mole ratio: NOBr formed tells NO consumed and half as much Br2.
Exam Note: Br2 used is half the NOBr formed.
Practice Problem 16. One mole of H2O and one mole of CO are taken in a 10 litre vessel and heated to 725 K. At equilibrium 40 per cent (by mass) of water reacts with CO according to the equation H2O(g) + CO(g) ⇌ H2(g) + CO2(g). Calculate the equilibrium constant for the reaction.
Solution. Water reacted = 0.4 mol. At equilibrium: H2O = 0.6, CO = 0.6, H2 = 0.4, CO2 = 0.4 mol in 10 L. Kc = (0.4 × 0.4)/(0.6 × 0.6) = 0.444 (volume cancels). Ans. 0.444.
Teacher's Note: Same amount in the vessel as 1 mol each, so 40% of water means 0.4 mol reacts.
Exam Note: Volume cancels since Δn = 0.
Practice Problem 17. At 700 K, equilibrium constant for the reaction H2(g) + I2(g) ⇌ 2HI(g) is 54.8. If 0.5 mol L-1 of HI(g) is present at equilibrium at 700 K, what are the concentrations of H2(g) and I2(g) assuming that we initially started with HI(g) and allowed it to reach equilibrium at 700 K? (N.C.E.R.T.)
Solution. Starting from HI only, [H2] = [I2] = x. K = [HI]2/([H2][I2]) = (0.5)2/x2 = 54.8, so x2 = 0.25/54.8 = 4.56 × 10-3, x = 0.068 mol L-1. Ans. [H2] = [I2] = 0.068 mol L-1.
Teacher's Note: Equal H2 and I2 arise from pure HI, so one unknown gives a direct square root.
Exam Note: Use K for the formation reaction as given.
Practice Problem 18. The equilibrium constant for the reaction CH3COOH + C2H5OH ⇌ CH3COOC2H5 + H2O is 4.0 at 25 °C. Calculate the weight of ethyl acetate that will be obtained when 120 g of acetic acid are reacted with 92 g of alcohol.
Solution. Moles: acetic acid = 120/60 = 2; ethanol = 92/46 = 2. Let x mol of ester form: x2/(2 - x)2 = 4, so x/(2 - x) = 2, x = 1.333 mol. Mass of ester = 1.333 × 88 = 117.3 g. Corrected: the book prints 117.04 g (from rounding x to 1.33); the correct value is 117.3 g.
Teacher's Note: Equal moles let you take a square root; multiply moles by 88 g/mol.
Exam Note: Convert moles of ester to grams (M = 88).
Practice Problem 19. A sample of pure PCl5 was introduced into an evacuated vessel at 473 K. After equilibrium was attained, concentration of PCl5 was found to be 0.5 × 10-1 mol L-1. If value of Kc is 8.3 × 10-3, what are the concentrations of PCl3 and Cl2 at equilibrium? (N.C.E.R.T.)
Solution. PCl5 ⇌ PCl3 + Cl2, [PCl3] = [Cl2] = x. Kc = x2/0.05 = 8.3 × 10-3, so x2 = 4.15 × 10-4, x = 0.02 mol L-1. Ans. [PCl3] = [Cl2] = 0.02 mol L-1.
Teacher's Note: Pure PCl5 start gives equal PCl3 and Cl2, so x2 = Kc[PCl5].
Exam Note: Equal product concentrations from pure PCl5.
Practice Problem 20. Bromine monochloride (BrCl) decomposes into bromine and chlorine and attains the equilibrium 2BrCl(g) ⇌ Br2(g) + Cl2(g) for which Kc = 32 at 500 K. If initially pure BrCl is present at a concentration of 3.30 × 10-3 mol L-1, what is its molar concentration in the mixture at equilibrium? (N.C.E.R.T.)
Solution. Let x mol L-1 each of Br2 and Cl2 form; [BrCl] = 3.30 × 10-3 - 2x. Kc = x2/(3.30 × 10-3 - 2x)2 = 32, so x/(3.30 × 10-3 - 2x) = √32 = 5.657, giving x = 1.52 × 10-3. [BrCl] = 3.30 × 10-3 - 2(1.52 × 10-3) = 2.7 × 10-4 mol L-1. Corrected: the book prints 3.0 × 10-4 mol L-1; recalculation gives 2.7 × 10-4 mol L-1.
Teacher's Note: Two BrCl give one Br2 and one Cl2; square-rooting Kc avoids a quadratic.
Exam Note: Remember BrCl falls by 2x.
Practice Problem 21. For the reaction CH4(g) + 2H2S(g) ⇌ CS2(g) + 4H2(g), at 1173 K, the magnitude of the equilibrium constant, Kc is 3.6. For the following composition, decide whether reaction mixture is at equilibrium. If it is not, decide to which direction the reaction should go: [CH4] = 1.07 M, [H2S] = 1.20 M, [CS2] = 0.90 M, [H2] = 1.78 M. (N.C.E.R.T.)
Solution. Qc = [CS2][H2]4/([CH4][H2S]2) = 0.90 × (1.78)4/(1.07 × (1.20)2) = 5.87. Qc ≠ Kc (3.6) and Qc > Kc, so the mixture is not at equilibrium and the reaction goes in the backward direction. Ans. Backward direction.
Teacher's Note: Compute Q with the given molarities, raise H2 to the fourth power, and compare with Kc.
Exam Note: Q > K means backward shift.
Free study material for Chemistry
Pradeep's KL Gogia Solutions for Class 11 Mathematics: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 7 Equilibrium I Part 1
Complete Math Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 7 Equilibrium I Part 1
Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 7 Equilibrium I Part 1 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for Class 11
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Explore More Study Resources for Class 11 Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.