Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 4 Classification Of Elements Periodicity In Properties Part 1

Official Pradeep's KL Gogia Textbook Solutions: Class 11 Chemistry Chapter 04 Classification Of Elements Periodicity In Properties

Access comprehensive textbook solutions for Chapter 04 Classification Of Elements Periodicity In Properties using the Pradeep's KL Gogia reference material for Class 11 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Chemistry: Chapter 04 Classification Of Elements Periodicity In Properties

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 4 Classification of Elements and Periodicity in Properties - Part 1

Problems on Predicting Period, Group and Block of Elements

Question 4.1. (a) Write the electronic configurations of the elements given below: A (At. No. = 9), B (At. No. = 12), C (At. No. = 29), D (At. No. = 54) and E (At. No. = 58). (b) Also predict the period, group number and block to which they belong. (c) Classify them as representative elements, noble gases, transition elements and inner transition elements.

Solution. (a) A: 1s2 2s2 2p5; B: 1s2 2s2 2p6 3s2; C: 1s2 2s2 2p6 3s2 3p6 3d10 4s1; D: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6; E: 1s2 2s2 2p6 3s2 3p6 3d10 4s2 4p6 4d10 5s2 5p6 6s2 5d1 4f1.

(b) Period = principal quantum number of the valence shell; block = type of orbital receiving the last electron; group number: s-block = number of valence electrons, p-block = 10 + number of electrons in the valence shell, d-block = number of electrons in (n−1)d + number in ns.

A: last electron enters 2p, so p-block; group = 10 + 7 = 17; period 2. B: last electron enters 3s, so s-block; group 2; period 3. C: last electron enters 3d, so d-block; group = 10 + 1 = 11; period 4. D: last electron enters 5p, so p-block; group = 10 + 8 = 18; period 5. E: last electron enters 4f, so f-block (the filling of 4f occurs only when one electron has entered 5d, so E is f-block and not d-block). It belongs to the lanthanide series, so it has no group number; period 6.

(c) A and B are representative elements (last electron enters a p- and s-orbital respectively). C is a transition element (last electron enters the d-orbital). D is a noble gas (completely filled s- and p-orbitals of the valence shell). E is an inner transition element (last electron enters the f-orbital).

Teacher's Note: Block comes from the orbital taking the last electron; group number from valence electrons (10 + for p-block).

Exam Note: Give configuration, then period, group and block in turn.

Question 4.2. The electronic configuration of some elements are given below: (i) 1s2 2s2 2p4; (ii) 1s2 2s2 2p6 3s1; (iii) 1s2 2s2 2p6 3s2 3p6 4s2; (iv) 1s2 2s2 2p6; (v) 1s2 2s2 2p6 3s2 3p2; (vi) 1s2 2s2 2p3; (vii) 1s2 2s2 2p6 3s2 3p6 4s2 3d5; (viii) 1s2 2s2 2p6 3s2 3p5. Name these elements and indicate which of them is (a) an alkali metal, (b) an alkaline earth metal, (c) a halogen, (d) a noble gas, (e) belongs to group 15, (f) belongs to second period, (g) has lowest chemical reactivity, (h) belongs to p-block elements and (i) is a transition element.

Solution. Names: (i) oxygen, (ii) sodium, (iii) calcium, (iv) neon, (v) silicon, (vi) nitrogen, (vii) manganese, (viii) chlorine.

(a) (ii), i.e. sodium is an alkali metal.

(b) (iii), i.e. calcium is an alkaline earth metal.

(c) (viii), i.e. chlorine is a halogen.

(d) (iv), i.e. neon is a noble gas.

(e) (vi), i.e. nitrogen belongs to group 15.

(f) (i), (iv) and (vi), i.e. oxygen, neon and nitrogen belong to the 2nd period.

(g) (iv), i.e. neon, being a noble gas, has the lowest reactivity.

(h) (i), (iv), (v) and (vi), i.e. oxygen, neon, silicon and nitrogen are p-block elements.

(i) (vii), i.e. manganese is a transition element.

Teacher's Note: Count electrons to get Z, then name the element; valence shell and last orbital give period and block.

Exam Note: Name each element first, then classify; unnamed classification loses marks.

Question 4.3. Predict the position of the element in the periodic table satisfying the electronic configuration (n − 1) d1 ns2 for n = 4. (N.C.E.R.T)

Solution. For n = 4, the electronic configuration = (4 − 1) d1 4s2 = 3d1 4s2. The element corresponding to this configuration is scandium, which is a d-block element.

Group number = No. of electrons in (n − 1)d subshell + No. of electrons in the nth shell = 1 + 2 = 3.

Teacher's Note: Substitute n = 4 to get 3d14s2; for d-block, group = d electrons + s electrons.

Exam Note: State block (d), group 3, period 4 and name Sc.

Question 4.4. Elements A, B, C, D and E have the following electronic configurations. A: 1s2 2s2 2p1; B: 1s2 2s2 2p6 3s2 3p1; C: 1s2 2s2 2p6 3s2 3p3; D: 1s2 2s2 2p6 3s2 3p5; E: 1s2 2s2 2p6 3s2 3p6 4s2. Which among these will belong to the same group in the periodic table? (N.C.E.R.T)

Solution. Elements having similar valence electronic configuration belong to the same group. Elements A and B both have three electrons in the valence shell, i.e. 2s2 2p1 and 3s2 3p1 respectively, and belong to the same group, i.e. group 13.

Teacher's Note: Compare only valence-shell configurations; same ns2np1 pattern means same group.

Exam Note: Answer: A and B (group 13); say why.

Question 4.5. The elements Z = 117 and Z = 120 have not yet been discovered. In what family or group would you place these elements and also give the electronic configuration in each case. (N.C.E.R.T)

Solution. In the long form of the periodic table, each period ends with a noble gas. Therefore, the element with Z = 118 will be the noble gas with the configuration [Rn] 4f14 5d10 7s2 7p6 and will lie in group 18 of the periodic table. If this is so, then the element with Z = 117 will belong to the halogen family (group 17) and its electronic configuration would be [Rn] 4f14 5d10 7s2 7p5.

Working on similar lines, the element with Z = 120 will belong to the family of alkaline earth metals (group 2) and its electronic configuration would be [Rn] 4f14 5d10 7s2 7p6 8s2 or [Uuo] 8s2, since the symbol for the element with Z = 118 is Uuo.

Teacher's Note: Anchor on the noble gas Z = 118; one fewer p electron gives halogen, two more electrons gives group 2.

Exam Note: Name family, group and full configuration for both elements.

Problems for Practice

Question 1 (Problems for Practice, p. 4/18). Write the names and atomic numbers of the following elements: (i) The fourth alkali metal (ii) The third alkaline earth metal (iii) The fifth element of the first transition series (iv) The first inner transition element and (v) The sixth noble gas.

Solution. (i) Rb (Z = 37), (ii) Ca (Z = 20), (iii) Mn (Z = 25), (iv) Ce (Z = 58), (v) Rn (Z = 86).

Teacher's Note: Count down the group or the 3d series: Li, Na, K, Rb; Be, Mg, Ca; Sc, Ti, V, Cr, Mn.

Exam Note: Write the name and the symbol with Z for each part.

Question 2 (Problems for Practice, p. 4/18). The outer electronic configuration of some elements are given below: (i) 3s2 3p3 (ii) 3d5 4s1 (iii) 3s2 3p6 4s2 (iv) 5d1 6s2 (v) 4f1 5d1 6s2. State to which block of the periodic table each of these elements belongs.

Solution. (i) p, (ii) d, (iii) s, (iv) d, (v) f.

Teacher's Note: Block is decided by the orbital that takes the last electron, not by the highest shell number.

Exam Note: One-word block per part; give the reason in one line.

Question 3 (Problems for Practice, p. 4/18). An element 'X' with atomic number 112 has recently been discovered. Predict its electronic configuration and suggest the group in which this element would be placed.

Solution. [Rn] 5f14 6d10 7s2, 12th group.

Teacher's Note: After 5f and 6d are full, Z = 112 ends with 6d107s2, which is group 12 (zinc family).

Exam Note: Group number = 10 + 2 electrons for this d-block element.

Question 4 (Problems for Practice, p. 4/18). Arrange the following elements in the increasing order of metallic character: B, Al, Mg, K. (N.C.E.R.T)

Solution. B < Al < Mg < K

Teacher's Note: Metallic character falls across a period and rises down a group; K is the most electropositive.

Exam Note: Compare Al, Mg in period 3 first, then B above Al.

Question 5 (Problems for Practice, p. 4/18). Write the electronic configuration and the block to which an element with Z = 90 belongs.

Solution. [Rn] 6d2 7s2, f-block elements.

Teacher's Note: Z = 90 is thorium, the first actinoid; 5f is empty yet it is placed in the f-block.

Exam Note: State configuration and mention it is an actinoid.

Question 6 (Problems for Practice, p. 4/18). How do the electronic configurations of the elements with Z = 107 − 109 differ from one another?

Solution. Corrected: The book's printed answer attributes the difference to 5f-electrons (Z = 107 has five, Z = 108 has six, Z = 109 has seven). These are d-block elements whose outer configurations are [Rn] 5f14 6d5 7s2 (Z = 107), [Rn] 5f14 6d6 7s2 (Z = 108) and [Rn] 5f14 6d7 7s2 (Z = 109). Thus these elements differ in the number of electrons in the 6d subshell: five, six and seven respectively.

Teacher's Note: The 5f subshell is already full (14) for all three; each added proton adds one electron to 6d.

Exam Note: Say 6d, not 5f; book is wrong.

Problems on the Calculation of Ionization Enthalpies

Question 4.6. Calculate the energy required to convert all the atoms of magnesium to magnesium ions present in 24 mg of magnesium vapours. First and second ionization enthalpies of Mg are 737.76 and 1450.73 kJ mol−1 respectively.

Solution. According to the definition of successive ionization energies, Mg(g) → Mg+(g) + e−(g); IE1 = 737.76 kJ mol−1, and Mg+(g) → Mg2+(g) + e−(g); IE2 = 1450.73 kJ mol−1.

Total amount of energy needed to convert Mg(g) atom into Mg2+(g) ion = IE1 + IE2 = 737.76 + 1450.73 kJ mol−1 = 2188.49 kJ mol−1.

24 mg of Mg = (24/1000) g = 24/(1000 × 24) mole = 10−3 mole.

Amount of energy needed to ionize 10−3 mole of Mg vapours = 2188.49 × 10−3 = 2.188 kJ.

Teacher's Note: Both electrons must be removed from each atom, so add IE1 and IE2, then scale by moles.

Exam Note: Convert mg to mol first; unit conversion is where marks are lost.

Problems for Practice

Question 1 (Problems for Practice, p. 4/21). Calculate the energy in joules required to convert all the atoms of sodium to sodium ions present in 2.3 mg of sodium vapours? Ionization enthalpy of sodium is 495 kJ mol−1 (Atomic mass of Na = 23).

Solution. Answer: 49.5 J.

Hint: No. of moles of Na present in 2.3 mg of Na = (2.3/1000) × (1/23) = 1 × 10−4 mole. Required energy = 1 × 10−4 × 495 × 103 J = 49.5 J.

Teacher's Note: Moles of atoms times molar ionization enthalpy; kJ must be turned into J.

Exam Note: Final answer in joules as asked, not kJ.

Question 2 (Problems for Practice, p. 4/21). The ionization potential of hydrogen is 13.60 eV. Calculate the energy in kJ required to produce 0.1 mole of H+ ions. Given, 1 eV = 96.49 kJ mol−1.

Solution. Answer: 131.226 kJ.

Hint: Required energy = 0.1 × 13.60 × 96.49 = 131.226 kJ.

Teacher's Note: 13.60 eV per atom is 13.60 × 96.49 kJ per mole; multiply by 0.1 mole.

Exam Note: Show eV to kJ mol−1 conversion step.

Question 3 (Problems for Practice, p. 4/21). The first and second ionization enthalpies of helium atoms are 24.58 eV and 54.4 eV respectively. Calculate the energy in kJ required to produce 1 mole of He2+ ions.

Solution. Answer: 7620.780 kJ.

Hint: Required energy = 1 × (24.58 + 54.4) × 96.49 = 7620.780 kJ.

Teacher's Note: To make He2+ both electrons are removed, so add both ionization energies.

Exam Note: Add IE1 and IE2 before converting units.

Question 4 (Problems for Practice, p. 4/21). The IE1 and IE2 of Mg(g) are 740 and 1450 kJ mol−1. Calculate the percentage of Mg+(g) and Mg2+(g) if 1 g of Mg(g) absorbs 50 kJ of energy.

Solution. Answer: Mg+(g) = 68.35% and Mg2+(g) = 31.65%.

Hint: No. of moles of Mg vapours present in 1 g = 1/24 = 0.0417. Energy absorbed in the ionization of 0.0417 mole of Mg(g) to Mg+(g) = 0.0417 × 740 = 30.83 kJ. Energy left unused = 50 − 30.83 = 19.17 kJ. Now 19.17 kJ will be used to ionize Mg+(g) to Mg2+(g), so no. of moles of Mg+(g) converted into Mg2+(g) = 19.17/1450 = 0.0132. No. of moles of magnesium ions left as Mg+ = 0.0417 − 0.0132 = 0.0285. Therefore % age of Mg+(g) = (0.0285/0.0417) × 100 = 68.35% and % age of Mg2+(g) = 100 − 68.35 = 31.65%.

Teacher's Note: All atoms are first ionized to Mg+; leftover energy converts some Mg+ into Mg2+.

Exam Note: Book rounds moles; exact values give about 68.3% and 31.7%.

Problems on Predicting Relative Ionization Enthalpies

Question 4.7. The electronic configuration for the following neutral atoms are given for use in question. (a) 1s2, 2s2, 2p6, 3s2; (b) 1s2, 2s2, 2p6, 3s1; (c) 1s2, 2s2, 2p4; (d) 1s2, 2s2, 2p5; (e) 1s2, 2s2, 2p6. (i) Which of the electronic configuration given above would you expect for the noble gas? (ii) Which of the electronic configurations given would you expect to have the lowest ionization enthalpy? (iii) List the above configurations in order of increasing ionization enthalpy.

Solution. (i) Arrange the electronic configurations of all the elements in order of increasing atomic number so that atoms containing the same outer energy shell are grouped together. Thus, L-shell: (c) 1s2 2s2 2p4, (d) 1s2 2s2 2p5, (e) 1s2 2s2 2p6; M-shell: (a) 1s2 2s2 2p6 3s2, (b) 1s2 2s2 2p6 3s1.

Since the M-shell is more distant from the nucleus than L-shell, so lesser amount of energy is required to remove an electron from M-shell than from the L-shell. In other words, the ionization enthalpy (IE) of atoms (a) and (b) should be lower than that of atoms (c), (d) and (e).

Further, in case of atom (a), the electron is to be removed from the more stable completely filled 3s-orbital whereas in case of atom (b) it is not so. Therefore, the IE of atom (b) should be lower than that of atom (a).

The nuclear charge on atoms (c), (d) and (e) is +8, +9 and +10 respectively. Since the IE increases with increase in nuclear charge so the IEs of atoms (c), (d) and (e) follow the sequence: c < d < e.

From the above discussion, we conclude that the ionization enthalpies of the five atoms increase in the following order: b < a < c < d < e, i.e., 1s2 2s2 2p6 3s1 < 1s2 2s2 2p6 3s2 < 1s2 2s2 2p4 < 1s2 2s2 2p5 < 1s2 2s2 2p6.

(i) The noble gas is configuration (e), 1s2 2s2 2p6, since the outer configuration of noble gases is ns2np6.

(ii) Evidently, atom (b) with electronic configuration 1s2 2s2 2p6 3s1 has the lowest ionization enthalpy.

(iii) b < a < c < d < e

Teacher's Note: Identify atoms: (a) Mg, (b) Na, (c) O, (d) F, (e) Ne. Compare shell, then charge.

Exam Note: Give the ordered sequence with reasons: shell, filled orbital, nuclear charge.

Question 4.8. The first (IE1) and the second (IE2) ionization enthalpies (kJ mol−1) of a few elements designated by Roman numerals are shown below:

ElementIE1IE2
I23725251
II5207300
III9001760
IV16803380
Which of the above elements is likely to be (a) a reactive metal (b) a reactive non-metal (c) a noble gas (d) a metal that forms a stable binary halide of the formula AX2 (X = halogen). (N.C.E.R.T)

Solution. (a) Since element II has a very low IE1 but a very high IE2, therefore, it has only one electron in the valence shell and hence is likely to be a reactive metal (i.e., an alkali metal).

(b) Since the IE1 of element IV is very high and IE2 is not so high (actually almost double), it is likely to be a reactive non-metal (i.e., a halogen).

(c) Among the elements listed, IE1 of element I is the highest and its IE2 is also not so high, therefore, it must be a noble gas.

(d) The IE1 of element III is higher than that of element II, but unlike element II, its IE2 is only about twice its IE1, therefore, it is likely that element III has two electrons in the valence shell (i.e., alkaline earth metal). As such it will form a stable binary halide of the formula AX2 where A is the metal and X is the halogen.

Teacher's Note: A huge jump between IE1 and IE2 shows one valence electron; a modest ratio shows two.

Exam Note: Link each IE pattern to valence electrons before naming the family.

Problems for Practice

Question 1 (Problems for Practice, p. 4/26). Arrange the following in the order of increasing ionization enthalpy: (i) 1s2 2s2 2p6 3s2 (ii) 1s2 2s2 2p6 3s1 (iii) 1s2 2s2 2p6 (iv) 1s2 2s2 2p2 (v) 1s2 2s2 2p3

Solution. Answer: (ii) < (i) < (iv) < (v) < (iii).

Hint: In a period, noble gas, i.e. 1s2 2s2 2p6 (iii), has the highest IE1. Out of C, 1s2 2s2 2p2 (iv) and N, 1s2 2s2 2p3 (v), N has higher IE1 due to higher nuclear charge and stable exactly half-filled electronic configuration. Because of bigger size both Mg, 1s2 2s2 2p6 3s2 (i) and Na, 1s2 2s2 2p6 3s1 (ii) have lower IE1 than C, N, O. Out of (i) and (ii), (i) has higher IE1 due to higher nuclear charge and completely filled s-orbital. Thus, the overall order of increasing IE1 is (ii) < (i) < (iv) < (v) < (iii).

Teacher's Note: Atoms are Na, Mg, C, N, Ne; N's half-filled 2p lifts it above C.

Exam Note: Name the atoms and justify each step briefly.

Question 2 (Problems for Practice, p. 4/26). The electronic configurations of some neutral atoms are given below: (i) 1s2 2s2 (ii) 1s2 2s2 2p1 (iii) 1s2 2s2 2p4 (iv) 1s2 2s2 2p3. Which of these electronic configuration would be expected to have the highest (a) IE1 (b) IE2 (c) IE3 (d) IE4?

Solution. Answer: (a) (iv), (b) (iii), (c) (i), (d) (ii).

Hint: (a)–(iv) has the highest IE1 due to stable exactly half-filled electronic configuration. (b)–(iii) has the highest IE2 since the second electron has to be removed from the stable exactly half-filled electronic configuration left after removal of 1st electron, i.e., 1s2 2s2 2p4 → (IE1) 1s2 2s2 2p3 → (IE2). (c)–(i) has the highest IE3 since the third electron has to be removed from the stable inert gas configuration, 1s2 2s2 → 1s2 2s1 → 1s2 →. (d)–(ii) has the highest IE4 since the fourth electron has to be removed from the stable inert gas configuration, 1s2 2s2 2p1 → 1s2 2s2 → 1s2 2s1 → 1s2 →.

Teacher's Note: Atoms are Be, B, O, N; look for the step that breaks a noble-gas core or half-filled shell.

Exam Note: State which electron is removed at each step.

Question 3 (Problems for Practice, p. 4/26). Among the elements Li, K, Ca, S and Kr, which one has the lowest first ionization enthalpy? Which has the highest first ionization enthalpy? (N.C.E.R.T)

Solution. Answer: Lowest: K, Highest: Kr.

Hint: K, Ca and Kr belong to 4th period. Since in a period, alkali metal has the lowest and inert gas has the highest IE1, therefore, K has the lowest IE1 and Kr has the highest IE1.

Teacher's Note: Within a period alkali metal is lowest and noble gas highest; down a group IE falls.

Exam Note: Compare K and Li down group 1; Kr tops.

Question 4 (Problems for Practice, p. 4/26). Which of the following pairs of elements would you expect to have lower first ionization enthalpy? Explain. (i) Cl or F (ii) Cl or S (iii) K or Ar (iv) Kr or Xe. (N.C.E.R.T)

Solution. Answer: (i) Cl (ii) S (iii) K (iv) Xe.

Hint: (i) Because of the bigger size and stronger shielding effect, Cl has lower IE1 than F. (ii) Among S and Cl, S has lower IE1 due to bigger size and lower nuclear charge. (iii) K has lower IE1 than Ar because K has one more electron than Ar and hence can easily lose this electron to acquire stable Ar has configuration. (iv) Xe because of its bigger size and stronger shielding effect has lower IE1 than Kr.

Teacher's Note: Down a group size and shielding win; across a period nuclear charge wins.

Exam Note: Pick the element, then give size or charge reason.

Question 5 (Problems for Practice, p. 4/26). For each of the following pairs, predict which one has lower first ionization enthalpy? (i) N or O (ii) Na or Na+ (iii) Be+ or Mg2+ (iv) I or I−

Solution. Corrected: (i) O, (ii) Na, (iii) Be+, (iv) I−. (The book prints (iv) as I, which is wrong.)

(i) O has lower IE1 than N because in case of O, loss of an electron gives O+ which has stable exactly half-filled electronic configuration while in case of N, an electron has to be lost from a stable half-filled electronic configuration.

(ii) Na has lower IE1 than Na+ because of the following two reasons: (a) in case of Na+, an electron has to be lost from a stable inert gas configuration while in case of Na, loss of an electron gives stable inert gas configuration; (b) Na is neutral but Na+ is +vely charged.

(iii) Be+ has lower IE1 than Mg2+ because in case of Be+, the loss of one electron gives stable inert gas configuration but in case of Mg2+, the electron has to be lost from the stable inert gas configuration.

(iv) I− has the lower IE1: removing an electron from the negatively charged I− (with a complete octet in the outer shell, repelling its electrons) needs only the energy equal to the electron gain enthalpy magnitude of iodine (about 295 kJ mol−1), far less than the IE1 of the neutral iodine atom (1008 kJ mol−1).

Teacher's Note: Anions lose electrons easily, cations hold them tightly; half-filled or noble-gas shells raise IE.

Exam Note: Part (iv): negative ion has lower IE than neutral atom.

Question 6 (Problems for Practice, p. 4/26). The first (IE1) and second (IE2) ionization enthalpies (kJ mol−1) of three elements I, II, III are given below:

IIIIII
IE14035491142
IE2264010602080
Identify the element which is likely to be (a) non-metal (b) an alkali metal (c) an alkaline earth metal. (N.C.E.R.T)

Solution. Answer: (a) III (b) I (c) II.

Hint: (a) IE1 of element III is the highest of the three elements listed, therefore, it is a non-metal. (b) Since IE2 of element I is very high as compared to its IE1, therefore, it is an alkali metal. (c) Since the IE1 of element II is higher than that of element I and lower than that of element III, therefore, it is an alkaline earth metal.

Teacher's Note: Big IE2/IE1 jump marks an alkali metal; a very high IE1 suggests a non-metal.

Exam Note: Use the IE2 jump as your evidence.

Question 7 (Problems for Practice, p. 4/26). Predict which atom in each of the following pairs has the greater first ionization enthalpy and explain your answer. (a) B and C (b) N and O (c) F and Ne. (N.C.E.R.T)

Solution. Answer: (a) C (b) N (c) Ne.

Hint: (a) C has higher IE1 than B because of higher nuclear charge. (b) N has higher IE1 than O because in case of N, the electron has to be lost from a more stable exactly half-filled electronic configuration. (c) Ne has higher IE1 than F because of stable inert gas configuration.

Teacher's Note: The N versus O reversal is the classic exception; half-filled 2p is extra stable.

Exam Note: Mention nuclear charge, half-filled p or noble-gas stability as relevant.

Question 8 (Problems for Practice, p. 4/26). From each set, choose the atom which has the largest ionization enthalpy and explain your answer. (a) F, O, N (b) Mg, P, Ar (c) B, Al, Ga. (N.C.E.R.T)

Solution. Answer: (a) F (b) Ar (c) B.

Hint: (a) F, O, N all belong to 2nd period. Among these, F has the highest IE1 because of its smallest size and highest nuclear charge. (b) Mg, P, Ar all lie in the 3rd period. Among these, Ar has the highest IE1 because it has stable inert gas configuration. (c) B, Al, Ga all lie in group 13. B has the highest IE1 due to its smallest size.

Teacher's Note: Same period: charge and small size dominate; same group: smallest atom has largest IE.

Exam Note: State period or group first, then the trend used.

Problems on the Calculation of Electron Gain Enthalpy

Question 4.9. The electron gain enthalpy of chlorine is −349 kJ mol−1. How much energy in kJ is released when 3.55 g of chlorine is converted completely into Cl− ion in the gaseous state.

Solution. According to the definition of electron gain enthalpy, Cl(g) + e−(g) → Cl−(g); ΔHeg = −349 kJ.

Energy released when 1 mole (= 35.5 g) of chlorine atoms change completely into Cl−(g) = 349 kJ. Energy released when 3.55 g of chlorine atoms change completely into Cl−(g) = (349/35.5) × 3.55 = 34.9 kJ.

Teacher's Note: Scale the molar value by moles: 3.55 g is 0.1 mol of Cl atoms.

Exam Note: Quote magnitude released (positive) with kJ.

Question 4.10. The amount of energy released when 1 × 1010 atoms of chlorine in vapour state are converted to Cl− ions according to the equation, Cl(g) + e− → Cl−(g) is 57.86 × 10−10 J. Calculate the electron gain enthalpy of chlorine atom in terms of kJ mol−1 and eV per atom.

Solution. The amount of energy released when 1 × 1010 atoms of chlorine in vapour state are converted to Cl− ions is 57.86 × 10−10 J. The electron gain enthalpy of chlorine, i.e., the amount of energy released when 1 mole (6.023 × 1023) atoms of chlorine are converted into Cl− ions according to the above equation will be

= − [57.86 × 10−10 / (1 × 1010)] × 6.023 × 1023 = −348.49 × 103 J/mol = −348.49 kJ/mol.

Now 1 eV/atom = 96.49 kJ/mol. ∴ Electron gain enthalpy of chlorine = −348.49/96.49 = −3.61 eV/atom.

Teacher's Note: Energy per atom times Avogadro's number gives J/mol; divide by 96.49 for eV per atom.

Exam Note: Show both units; sign is negative as energy is released.

Problems for Practice

Question 1 (Problems for Practice, p. 4/29). The electron affinity of bromine is 3.36 eV. How much energy in kcal is released when 8 g of bromine is completely converted to Br− ions in the gaseous state? (1 eV = 23.06 kcal mol−1)

Solution. Answer: 7.748 kcal.

Hint: No. of moles of Br = 8/80 = 0.1. Required energy = 0.1 × 3.36 × 23.06 = 7.748 kcal.

Teacher's Note: Moles of Br atoms (8 g / 80) times eV per atom times 23.06 kcal per mol per eV.

Exam Note: Use Br = 80 and convert eV to kcal mol−1.

Question 2 (Problems for Practice, p. 4/29). The amount of energy released when one million atoms of iodine in the vapour state are completely converted into I− ions in the vapour state according to the equation, I(g) + e− → I−(g) is 4.9 × 10−13 J. Calculate the electron affinity of iodine in (i) kJ/mol and (ii) in eV per atom.

Solution. Answer: 295 kJ/mol and 3.06 eV/atom.

Hint: Electron affinity = 6.023 × 1023 × 4.9 × 10−13 × 10−6 = 29.5 × 104 × 10−3 kJ = 295 kJ mol−1 = 295/96.49 eV/atom = 3.06 eV/atom.

Teacher's Note: Divide the total energy by 106 atoms, multiply by NA; then divide kJ/mol by 96.49.

Exam Note: Give both units as asked.

Problems on Predicting Electron Gain Enthalpy

Question 4.11. Which of the following elements has the most negative electron gain enthalpy? Give reasons. (i) [Ne] 3s2 3p3 (ii) [Ne] 3s2 3p4 (iii) [Ne] 3s2 3p5

Solution. The element (chlorine) corresponding to the electronic configuration (iii) will have the most negative electron gain enthalpy. This is due to the reason that it contains one electron less than the stable noble gas configuration, i.e., [Ne] 3s2 3p6 and hence, has a strong tendency to accept one electron to acquire the stable noble gas configuration.

Teacher's Note: Elements are P, S, Cl; the one needing a single electron releases most energy.

Exam Note: Name Cl and say it is one electron short of a noble.

Question 4.12. Which of the following pairs would have more negative electron gain enthalpy? Explain. (i) N or O (ii) F or Cl (iii) S or O (iv) C or Si (N.C.E.R.T for (i) and (ii))

Solution. (a) The electron gain enthalpy of O is highly negative while that of N is slightly positive.

Reason. The electronic configuration of N is quite stable since it has exactly half-filled 2p-orbitals and hence has no tendency to accept an extra electron. Thus, electron-gain enthalpy of N is slightly positive. In contrast, the electronic configuration of O is not so stable but it has higher nuclear charge and lower atomic size than N and hence it has a high tendency to accept an extra electron. In other words, electron gain enthalpy of O is highly negative.

(b) Cl has more negative electron gain enthalpy than F.

Reason. As explained in Example 4.11.

(c) S has more negative electron gain enthalpy than O.

Reason. The size of O is much smaller than that of S. As a result, the electron-electron repulsions in the smaller 2p-subshell of O are comparatively larger than those present in the bigger 3p-subshell of S. Therefore, S has higher tendency to accept an additional electron than O.

(d) C has more negative electron gain enthalpy than Si.

Reason. This is because C-atom has smaller size than Si-atom. (Note that the electron-electron repulsions in these atoms are not very large because they contain only 4 electrons in the outermost shell.)

Teacher's Note: The 2p anomaly: O, F are smaller than S, Cl, so electron repulsion cuts their electron gain.

Exam Note: Cite compact 2p repulsion for O/F versus S/Cl.

Pradeep's KL Gogia Solutions for Class 11 Mathematics: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 4 Classification Of Elements Periodicity In Properties Part 1

Download Pradeep's KL Gogia Solutions for Class 11

Access the complete chapter-wise PDF for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 4 Classification Of Elements Periodicity In Properties Part 1. These structured Pradeep's KL Gogia Solutions solutions for Class 11 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.