Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 2 States Of Matter Part 2

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Chemistry Chapter 02 States Of Matter

Explore reliable textbook solutions for Chapter 02 States Of Matter tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 02 States Of Matter Textbook Solutions PDF

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 2 States of Matter - Part 2 (pages 27-52)

Problems on Calculation of u, v and Kinetic Theory

Question Example 1. At 27°C, a gas contains 10 molecules travelling with a speed of 4 m s−1, 20 molecules travelling with a speed of 5 m s−1 and 40 molecules travelling with a speed of 8 m s−1. Calculate the average speed, root mean square speed and most probable speed of the gas at 27°C.

Solution.

Average speed (uav) = Σnivi / Σni = (10 × 4 + 20 × 5 + 40 × 8)/(10 + 20 + 40) = 460/70 = 6.56 m s−1

Root mean square speed (ur.m.s.) = √(Σnivi2/Σni) = √((10 × 42 + 20 × 52 + 40 × 82)/(10 + 20 + 40)) = √((160 + 500 + 2560)/70) = 6.78 m s−1

Most probable speed (ump) = 0.816 × ur.m.s. = 0.816 × 6.78 m s−1 = 5.53 m s−1.

(Book prints 6.56 m s−1 for 460/70; the exact value is 6.57 m s−1.)

Teacher's Note: Average speed is a plain mean, rms squares speeds first; always ump < uav < urms.

Exam Note: Use number-weighted sums; state ump = 0.816 urms.

Question Example 2. (a) Calculate the total and average kinetic energy of 32 g methane molecules at 27°C (R = 8.314 JK−1 mol−1). (b) Also calculate the root mean square speed of methane molecules at 27°C. (Bihar C.E.E. 1997, N.C.E.R.T.)

Solution.

(a) Total K.E. = (3/2)nRT = (3/2) × (32/16) mol × 8.314 JK−1 mol−1 × 300 K = 7482.6 J (molar mass of CH4 = 16 g mol−1)

Average K.E. = (3/2)kT = (3/2) × (8.314 JK−1 mol−1/6.02 × 1023 molecules mol−1) × 300 K = 6.21 × 10−21 J molecule−1, or (3/2)RT mol−1 = (3/2) × 8.314 × 300 = 3741.3 J mol−1.

(b) ur.m.s. = √(3RT/M). Using C.G.S. units, R = 8.314 × 107 ergs K−1 mol−1, T = 300 K, M = 16 g mol−1: ur.m.s. = √(3 × 8.314 × 107 × 300/16) = 6.839 × 104 cm s−1 = 683.9 m s−1.

Using S.I. units, R = 8.314 JK−1 mol−1, T = 300 K, M = 16 × 10−3 kg mol−1: ur.m.s. = √(3 × 8.314 × 300/(16 × 10−3)) = 683.9 m s−1.

Teacher's Note: Total KE depends on moles (32 g = 2 mol); average KE per molecule only on T.

Exam Note: Convert molar mass to kg mol−1 in SI; show unit steps.

Question Example 3. The average kinetic energy of a gas molecule at 0°C is 5.621 × 10−21 J. Calculate Boltzmann constant. Also calculate the number of molecules present in one mole of the gas.

Solution.

Average kinetic energy (K.E.) = (3/2)kT, so k = (2/3) × K.E./T = (2/3) × (5.621 × 10−21 J molecule−1/273 K) = 1.373 × 10−23 JK−1 molecule−1.

Number of molecules in 1 mole (Avogadro's No.) = R/k = 8.314 JK−1 mol−1/(1.373 × 10−23 JK−1 molecule−1) = 6.055 × 1023 molecules mol−1.

Teacher's Note: Use T in kelvin (273 K); NA = R/k links macroscopic and molecular constants.

Exam Note: Write T = 273 K; give k with unit JK−1.

Problems on van der Waals Equation and Compressibility Factor

Question Example 1 (vdW). Calculate the pressure exerted by 110 g of carbon dioxide in a vessel of 2 L capacity at 37°C. Given that the van der Waals constants are a = 3.59 L2 atm mol−2 and b = 0.0427 L mol−1. Compare the value with the calculated value if the gas were considered as ideal.

Solution.

According to van der Waals' equation, (P + an2/V2)(V − nb) = nRT, so P = nRT/(V − nb) − an2/V2.

Here n = 110/44 = 2.5 moles. Substituting the given values:

P = [(2.5 mol)(0.0821 L atm K−1 mol−1)(310 K)]/[2 L − 2.5 mol × 0.0427 L mol−1] − [(3.59 L2 atm mol−2)(2.5 mol)2]/(2 L)2 = 33.61 atm − 5.61 atm = 28.0 atm

If the gas were considered ideal: P = nRT/V = (2.5 × 0.0821 × 310)/2 = 31.8 atm.

Teacher's Note: The a-term lowers pressure (attraction), the b-term raises it; real P is below the ideal value here.

Exam Note: Show both corrections; compare 28.0 atm with 31.8 atm.

Question Example 2 (vdW). Calculate the temperature of 2 moles of sulphur dioxide gas contained in a 5 L vessel at 10 bar pressure. Given that for SO2 gas, van der Waals' constants are: a = 6.7 bar L2 mol−2 and b = 0.0564 L mol−1.

Solution.

According to van der Waals' equation, (P + an2/V2)(V − nb) = nRT, so T = (P + an2/V2)(V − nb)/(nR).

As pressure is in bar, take R = 0.083 L bar K−1 mol−1:

T = [10 bar + (6.7 bar L2 mol−2)(2 mol)2/(5 L)2](5 L − 2 mol × 0.0564 L mol−1)/(2 mol × 0.083 L bar K−1 mol−1) = (10 bar + 1.072 bar)(5 L − 0.1128 L)/(2 × 0.083 L bar K−1) = 326 K

Teacher's Note: Match R to the pressure unit: bar needs R = 0.083 L bar K−1 mol−1.

Exam Note: Pick R consistent with units of a and P.

Question Example 3 (vdW). One mole of SO2 gas occupies a volume of 350 mL at 27°C and 50 atm pressure. Calculate the compressibility factor of the gas. Comment on the type of deviation shown by the gas from ideal behaviour.

Solution.

Compressibility factor, Z = PV/nRT. Substituting, n = 1 mol, P = 50 atm, V = 350 × 10−3 L = 0.35 L, R = 0.0821 L atm K−1 mol−1, T = 27 + 273 = 300 K:

Z = (50 atm)(0.35 L)/[(1 mol)(0.0821 L atm K−1 mol−1)(300 K)] = 0.711

For ideal gas, Z = 1. As for the given gas Z < 1, it shows negative deviation i.e. it is more compressible than expected from ideal behaviour.

Teacher's Note: Z < 1 means attractive forces dominate, so gas is more compressible than ideal.

Exam Note: Convert mL to L; state Z < 1 = negative deviation.

Question Example 4 (vdW). The van der Waals' constant 'b' for oxygen is 0.0318 L mol−1. Calculate the diameter of the oxygen molecule.

Solution.

b = 4v, so v = b/4 = 0.0318/4 = 7.95 × 10−3 L mol−1 = 7.95 cm3 mol−1.

Volume occupied by one O2 molecule = 7.95/(6.02 × 1023) = 1.32 × 10−23 cm3.

Considering the molecule to be spherical, (4/3)πr3 = 1.32 × 10−23, so r3 = (3/4) × (7/22) × 1.32 × 10−23 = 3.15 × 10−24, giving r = 1.466 × 10−8 cm.

Diameter of oxygen molecule = 2r = 2.932 × 10−8 cm = 2.932 Å.

Teacher's Note: b is four times the actual molecular volume per mole; divide by NA then use sphere volume.

Exam Note: Quote b = 4v, then (4/3)πr³; give answer in Å.

Problems for Practice

Question Practice 1. Calculate the pressure exerted by 10.2 g of NH3 in a 3.0 dm3 vessel at 25°C (a) using ideal gas equation (b) using van der Waals' equation. The van der Waals' constants are: a = 4.17 dm6 atm mol−2, b = 0.0371 dm3 mol−1.

Solution.

Ans. (a) 4.9 atm (b) 4.8 atm

(Check: n = 0.6 mol; ideal P = 0.6 × 0.0821 × 298/3 = 4.89 atm; van der Waals P = 14.68/2.978 − 0.167 = 4.76 atm ≈ 4.8 atm.)

Teacher's Note: Real pressure is slightly below ideal for NH3 because attraction (a) dominates.

Exam Note: Give both answers in atm; compare ideal and real.

Question Practice 2. 180 g of steam is contained in a vessel of 25 L capacity under a pressure of 50 atm. Calculate the temperature of the steam. Given that for water vapour: a = 5.46 bar L2 mol−2 and b = 0.031 L mol−1.

Solution.

Ans. 1531.7 K

(Check: n = 10 mol; T = (50 + 5.46 × 100/625)(25 − 0.31)/(10 × 0.0821) ≈ 1530 K, agreeing with the printed answer to rounding of R.)

Teacher's Note: Use the van der Waals form solved for T; 180 g water = 10 mol.

Exam Note: Use n = 10 mol; a is in bar, P atm.

Conceptual Questions

Question 1. Arrange solid, liquid and gas in order of energy, giving reasons.

Solution.

Solid < Liquid < Gas. This is because a solid absorbs energy to change into a liquid which further absorbs energy to change into a gas.

Teacher's Note: Energy rises as particles gain freedom; link to latent heat absorbed.

Exam Note: Order plus reason for 2 marks.

Question 2. A gas is filled into a bulb connected to an open limb manometer. The difference in the levels of the two limbs is 2.1 cm. The atmospheric pressure is 740 mm. What is the pressure of the gas?

Solution.

740 − 21 = 719 mm.

Teacher's Note: Convert 2.1 cm to 21 mm; subtract as gas pressure is below atmospheric.

Exam Note: Convert units to mm first.

Question 3. How do you convert (a) pressure in atmospheres into SI units? (b) temperature in °C to temperature in °F?

Solution.

(a) 1 atm = 101,325 Pa or N m−2 or 1 bar = 105 Pa
(b) °C = (5/9)(°F − 32)

Teacher's Note: SI unit of pressure is pascal (N m−2); note the 5/9 factor.

Exam Note: Write both conversion factors.

Question 4. What type of graph will you get when PV is plotted against P at constant temperature.

Solution.

A straight line parallel to pressure axis.

Teacher's Note: Boyle's law makes PV constant, hence a horizontal line.

Exam Note: State PV = constant.

Question 5. How is the pressure of a gas related to its density at a particular temperature?

Solution.

d = MP/RT

Teacher's Note: From PV = nRT with n = w/M; density is proportional to pressure at constant T.

Exam Note: Derive from PV = (w/M)RT.

Question 6. How is the partial pressure of a gas in a mixture related to the total pressure of the gaseous mixture?

Solution.

Partial pressure of a gas = Mole fraction of that gas × Total pressure.

Teacher's Note: This is Dalton's law restated using mole fraction.

Exam Note: Write pA = xA P.

Question 7. Represent the relative values of most probable speed, average speed and root mean square speed on Maxwell's distribution curve for speeds.

Solution.

Refer to fig. 2.15 (b) page 2/26.

Teacher's Note: Order is ump < uav < urms along speed axis.

Exam Note: Mark the three speeds in order.

Question 8. What is the relationship between average kinetic energy and the temperature of a gas?

Solution.

K.E. = (3/2)kT where k is Boltzmann constant (= R/N0).

Teacher's Note: Average KE is proportional to absolute temperature only, independent of gas.

Exam Note: Write K.E. = (3/2)kT.

Question 9. What is the significance of the van der Waals' constants 'a' and 'b'? (N.C.E.R.T.)

Solution.

'a' is a measure of the magnitude of the intermolecular forces of attraction while b is a measure of the effective size of the gas molecules.

Teacher's Note: Bigger a means easier liquefaction; b is the excluded volume.

Exam Note: Give meaning of each constant.

Question 10. Why in case of hydrogen and helium, the compressibility factor is always greater than 1 and increases with increase of pressure?

Solution.

Refer to 'Explanation of exceptional behaviour of H2 and He', page 2/31.

Teacher's Note: Tiny molecules have negligible attraction, so only the b-term acts: Z = 1 + Pb/RT.

Exam Note: Say 'a' is negligible, so Z > 1.

Question 11. The van der Waals' constants for two gases are as follows:
Gasa (atm L2 mol−2)b (L mol−1)
X1.390.0391
Y3.590.0427
Which of them is more easily liquefiable and which has greater molecular size?

Solution.

Greater the value of 'a', more easily is gas liquefiable. Similarly, greater the value of 'b', greater is the molecular size. Hence gas Y will be more easily liquefiable and will have greater molecular size.

Teacher's Note: Compare a for liquefaction and b for size; Y has larger values of both.

Exam Note: Link a to liquefaction, b to size.

Question 12. Compare the rates of diffusion of 235UF6 and 238UF6.

Solution.

Molecular mass of 235UF6 = 235 + 6 × 19 = 349

Molecular mass of 238UF6 = 238 + 6 × 19 = 352

r1(235UF6)/r2(238UF6) = √(M2/M1) = √(352/349) = 1.004

Thus r(235UF6) : r(238UF6) = 1.004 : 1.

Teacher's Note: Graham's law: lighter isotopologue diffuses faster, but only by 0.4%, hence many enrichment stages.

Exam Note: Use Graham's law with molar masses.

Question 13. At a certain altitude, the density of air is 1/10th of the density of the earth's atmosphere and temperature is −10°C. What is the pressure at that altitude? Assume that air behaves like an ideal gas, has uniform composition and is at S.T.P. at the earth's surface.

Solution.

P1V1/T1 = P2V2/T2 or P2 = P1V1T2/(T1V2).

But d ∝ 1/V. Hence P2 = (P1T2/T1)(d2/d1) = (760 × 263/273)(1/10) = 73.2 mm.

Teacher's Note: Density is inversely proportional to volume at fixed mass; T in kelvin (263 K).

Exam Note: Take S.T.P. as 760 mm and 273 K.

Question 14. What would be the SI unit for the quantity pV2T2/n? (N.C.E.R.T.)

Solution.

(N m−2)(m3)2(K)2/mol = N m4 K2 mol−1

Teacher's Note: Substitute SI units for each symbol and simplify powers of m.

Exam Note: Show unit substitution.

Question 15. In terms of Charles' law explain why −273°C is the lowest temperature. (N.C.E.R.T.)

Solution.

At −273°C, volume of the gas becomes equal to zero i.e. the gas ceases to exist.

Teacher's Note: V = V0(1 + t/273) gives V = 0 at −273°C; no lower temperature is possible.

Exam Note: Mention volume tends to zero.

Question 16. Critical temperature for CO2 and CH4 are 31.1°C and −81.9°C respectively. Which of these has stronger intermolecular forces and why? (N.C.E.R.T.)

Solution.

Higher the critical temperature, more easily the gas can be liquefied i.e. greater are the intermolecular forces of attraction. Hence CO2 has stronger intermolecular forces than CH4.

Teacher's Note: Critical temperature is a direct measure of attraction between molecules.

Exam Note: Link higher Tc to stronger forces.

Question 17. What is the ratio of average kinetic energy of oxygen molecules to that of ozone molecules at 27°C?

Solution.

Average kinetic energy of any gas depends only on temperature and not upon the nature of the gas. Hence both the gases will have same average kinetic energy at 27°C i.e. the ratio will be 1 : 1.

Teacher's Note: Average KE = (3/2)kT, independent of molar mass.

Exam Note: Answer 1:1 citing temperature only.

Question 18. What is the difference between total kinetic energy and translational kinetic energy? For what type of molecules, the two are equal?

Solution.

Total kinetic energy is the sum of translational, vibrational and rotational kinetic energies. The total kinetic energy is equal to the translational kinetic energy for monoatomic gases (He, Ne etc.) as they do not possess vibrational and rotational motion but have only translational motion.

Teacher's Note: Monoatomic gases lack rotational and vibrational degrees of freedom.

Exam Note: Name monoatomic gases as example.

Question 19. Out of N2 and NH3, which one will have greater value of 'a' and which one will have greater value of 'b'?

Solution.

(i) As NH3 is more easily liquefiable (due to hydrogen bonding), intermolecular forces of attraction are stronger than in N2. Hence NH3 will have greater value for 'a'.
(ii) As NH3 molecule is larger in size than N2, hence NH3 will have greater value for 'b'.
(For NH3, a = 4.17 L2 atm mol−2, b = 0.0371 L mol−1; for N2, a = 1.39 L2 atm mol−2, b = 0.0319 L mol−1)

Teacher's Note: Hydrogen bonding in NH3 raises a; larger molecule raises b.

Exam Note: Cite hydrogen bonding and size.

Question 20. What would have happened to the gas if the molecular collisions were not elastic?

Solution.

On every collision, there would have been loss of energy. As a result, the molecules would have slowed down and ultimately settle down in the vessel.

Teacher's Note: Kinetic theory assumes perfectly elastic collisions so energy and pressure stay constant.

Exam Note: Mention energy loss per collision.

Question 21. CO2 is heavier than O2 and N2 gases present in the air but it does not form the lower layer of the atmosphere. Why?

Solution.

Gases possess the property of diffusion which is independent of the force of gravitation. Due to diffusion, the gases mix into each other and remain almost uniformly distributed in the atmosphere.

Teacher's Note: Diffusion beats gravitational settling for gases.

Exam Note: Name diffusion as the reason.

Question 22. N2O and CO2 have the same rate of diffusion under same conditions of temperature and pressure. Why?

Solution.

Both have same molar mass (= 44 g mol−1). According to Graham's law of diffusion, rates of diffusion of different gases are inversely proportional to the square root of their molar masses under same conditions of temperature and pressure.

Teacher's Note: Rate depends on molar mass only; both are 44 g mol−1.

Exam Note: State Graham's law with the equal masses.

Question 23. Why liquids have a definite volume but no definite shape?

Solution.

This is because the intermolecular forces are strong enough to hold the molecules together but not so strong as to fix them into definite positions (as in solids). Instead, they possess fluidity and hence no definite shape.

Teacher's Note: Forces are intermediate: molecules stay close but can slide past one another.

Exam Note: Contrast with solids and gases.

Question 24. At a particular temperature, why vapour pressure of acetone is less than that of ether?

Solution.

This is because the intermolecular forces of attraction in acetone are stronger than those present in ether.

Teacher's Note: Stronger attraction means fewer molecules escape, so lower vapour pressure.

Exam Note: Compare intermolecular forces.

Question 25. If liquid is transferred from a smaller vessel to a bigger vessel at the same temperature, what will be the effect on the vapour pressure?

Solution.

No effect as it depends only on the nature of the liquid and temperature.

Teacher's Note: Vapour pressure is independent of vessel size and amount of liquid.

Exam Note: Say depends on liquid and temperature only.

Question 26. Why vegetables are cooked with difficulty at a hill station?

Solution.

The atmospheric pressure is less and so the boiling point is lowered.

Teacher's Note: Water boils at a lower temperature, so cooking is slower.

Exam Note: Link low pressure to lower boiling point.

Question 27. What is the approximate relationship between heat of vaporisation and boiling point of a liquid?

Solution.

ΔHvap./Tb = 21 cal K−1 mol−1 (Trouton's rule).

Teacher's Note: Trouton's rule holds for non-associated liquids.

Exam Note: Quote the rule with units.

Question 28. What is the effect of temperature on (i) Surface tension and (ii) Viscosity?

Solution.

Both decrease with increase of temperature.

Teacher's Note: Higher thermal motion weakens intermolecular grip on both properties.

Exam Note: State both decrease.

Question 29. Why falling liquid drops are spherical?

Solution.

This is due to property of surface tension possessed by the liquids. This makes the surface area minimum. For a given volume, sphere has the minimum surface area.

Teacher's Note: Surface tension minimises surface area; sphere is the minimum for fixed volume.

Exam Note: Link surface tension to minimum area.

Question 30. What happens if a liquid is heated to the critical temperature of its vapours?

Solution.

The meniscus between the liquid and the vapour disappears (surface tension of the liquid becomes zero).

Teacher's Note: Beyond Tc liquid and gas phases become indistinguishable.

Exam Note: Mention disappearance of meniscus.

Question 31. Why liquids diffuse slowly as compared to gases?

Solution.

In liquids, the molecules are less free than in a gas i.e. the intermolecular forces (van der Waals' forces) in a liquid are greater than in a gas.

Teacher's Note: Stronger forces and closer packing slow molecular movement.

Exam Note: Compare forces in liquid and gas.

Question 32. Why amorphous solids are considered to be supercooled liquids?

Solution.

(i) Like liquids, amorphous solids are isotropic
(ii) Like liquids, they possess fluidity.

Teacher's Note: Amorphous solids lack long-range order like liquids and flow very slowly.

Exam Note: Give both similarities.

Question 33. Why urea has a sharp melting point but glass does not?

Solution.

Urea is a crystalline solid whereas glass is amorphous. Crystalline solids have sharp melting points whereas amorphous solids do not possess sharp melting point.

Teacher's Note: Ordered structure melts all at once; amorphous melts over a range.

Exam Note: Contrast crystalline with amorphous.

Very Short Answer Questions (1 mark)

Question VSAQ 1. Which state of matter has a definite volume but no definite shape?

Solution.

Liquid.

Teacher's Note: Liquids keep volume but take the container's shape.

Exam Note: One word: liquid.

Question VSAQ 2. What is the equation of state of an ideal gas for n moles?

Solution.

PV = nRT.

Teacher's Note: Combines Boyle, Charles and Avogadro laws.

Exam Note: Write PV = nRT.

Question VSAQ 3. What is the value of the gas constant in S.I. units?

Solution.

8.314 JK−1 mol−1.

Teacher's Note: Same R equals 0.0821 L atm K−1 mol−1 in other units.

Exam Note: Give the unit too.

Question VSAQ 4. What is compressibility factor?

Solution.

Z = PV/nRT

Teacher's Note: Z = 1 for an ideal gas; deviations show real behaviour.

Exam Note: Write the formula.

Question VSAQ 5. What is the equation of state for real gases?

Solution.

van der Waal equation, (P + a/V2)(V − b) = RT

Teacher's Note: For n moles use (P + an²/V²)(V − nb) = nRT.

Exam Note: Write the corrected form.

Question VSAQ 6. Why a liquid boils at a lower temperature at the top of a mountain than at sea level?

Solution.

This is because the pressure at the top of a mountain is low.

Teacher's Note: Boiling occurs when vapour pressure equals external pressure.

Exam Note: Link low pressure to boiling point.

Question VSAQ 7. What are the S.I. units of surface tension?

Solution.

Nm−1.

Teacher's Note: Surface tension is force per unit length.

Exam Note: Write N m−1.

Question VSAQ 8. What are the units of coefficient of viscosity?

Solution.

Poise.

Teacher's Note: CGS unit is poise; SI unit is kg m−1 s−1.

Exam Note: Poise in CGS.

Question VSAQ 9. What is SI unit of coefficient of viscosity? How is it related to poise?

Solution.

SI unit = kg m−1 s−1; Poise = 1 g cm−1 s−1; ∴ 1 poise = (1/10)th of SI unit.

Teacher's Note: Convert g to kg and cm to m to get the factor 1/10.

Exam Note: Give both units and factor.

Question VSAQ 10. Why ice has a sharp melting point whereas glass melts over a range of temperature? (N.C.E.R.T.)

Solution.

Ice is a crystalline solid whereas glass is an amorphous solid.

Teacher's Note: Ordered lattice melts at one temperature; amorphous softens gradually.

Exam Note: Crystalline versus amorphous.

Question VSAQ 11. What is the binding force between molecules, if a substance is a gas under ordinary conditions of temperature and pressure? (B.I.T. Ranchi 1990)

Solution.

van der Waals' forces.

Teacher's Note: Weak forces explain the gaseous state at room conditions.

Exam Note: Name van der Waals' forces.

Download Pradeep's KL Gogia Solutions for Class 11 Math PDF

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 2 States Of Matter Part 2

Review detailed solutions for Class 11 Mathematics. The Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 2 States Of Matter Part 2 PDF provides comprehensive answers mapped to standard Pradeep's KL Gogia Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.