Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 17 Organic Compounds With Functional Groups Containing Halogens Part 2

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Chemistry Chapter 17 Organic Compounds With Functional Groups Containing Halogens

Access comprehensive textbook solutions for Chapter 17 Organic Compounds With Functional Groups Containing Halogens using the Pradeep's KL Gogia reference material for Class 11 Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 17 Organic Compounds With Functional Groups Containing Halogens Textbook Solutions PDF

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 17 Organic Compounds With Functional Groups Containing Halogens - Pages 27-52

Conceptual Questions

Question 1. Arrange each of the following sets of compounds in order of increasing boiling points: (a) Bromoethane, bromoform, chloromethane, dibromomethane. (b) Propane, 1-chloropropane, isopropyl chloride, 1-chlorobutane. (N.C.E.R.T.)

Solution. (a) Since boiling points increase with increasing molecular mass due to greater magnitude of van der Waals' forces of attraction, the boiling points of these compounds increase in the order: Chloromethane, bromoethane, dibromomethane, bromoform.

(b) The boiling points increase with increasing molecular mass but decrease with branching. Isopropyl chloride, being branched, has lower boiling point than 1-chloropropane. The actual order of increasing boiling points is: Propane, isopropyl chloride, 1-chloropropane, 1-chlorobutane.

Teacher's Note: Boiling point rises with molar mass and surface area; branching lowers it, so compare mass first, then branching.

Exam Note: Give order with reason: mass, then branching.

Question 2. Arrange the following in order of increasing boiling points: (i) n-amyl chloride, neopentyl chloride, tert-amyl chloride, isoamyl chloride. (ii) n-hexyl chloride, n-pentyl chloride, tert-butyl chloride, n-propyl chloride, sec-butyl chloride.

Solution. (i) Amongst isomeric alkyl halides, boiling points decrease as the branching increases. Since branching increases in the order: n-amyl chloride, isoamyl chloride, tert-amyl chloride, neopentyl chloride, therefore, the boiling points decrease in the same order: n-amyl chloride > isoamyl chloride > tert-amyl chloride > neopentyl chloride.

(ii) As the length of the carbon chain increases, the boiling point increases and amongst isomeric alkyl halides, boiling point decreases as the branching increases. Thus, n-hexyl chloride with six carbon atoms has the highest b.p., followed by n-pentyl chloride with five carbon atoms followed by sec-butyl chloride and tert-butyl chloride with four carbon atoms each, followed by n-propyl chloride with three carbon atoms. Amongst sec-butyl chloride and tert-butyl chloride, tert-butyl chloride has lower boiling point because of two branches than sec-butyl chloride with no branching. Thus, the overall order is: n-hexyl chloride > n-pentyl chloride > sec-butyl chloride > tert-butyl chloride > n-propyl chloride.

Teacher's Note: Rank by carbon count first; only within isomers does branching decide, since it shrinks surface contact.

Exam Note: Chain length first, branching second; write full order.

Question 3. Haloarenes are insoluble in water but are soluble in benzene. (D.S.B. 1998)

Solution. Haloarenes are insoluble in water because neither can they form H-bonds with water nor can they break the H-bonds already existing in water. However, in accordance with the general principle of solubility, i.e., like dissolves like, haloarenes due to the presence of a large hydrocarbon part (benzene ring) are soluble in hydrocarbon solvents such as benzene, petroleum ether etc.

Teacher's Note: Solubility needs new solute-solvent attractions to compensate for the broken solvent bonds; haloarenes cannot do this with water.

Exam Note: State 'like dissolves like' with the H-bond reason.

Question 4. p-Dichlorobenzene has higher melting point and lower solubility than those of o- and m-isomers.

Solution. The p-isomer being more symmetrical fits closely in the crystal lattice and thus has stronger intermolecular forces of attraction than o- and m-isomers. Since during melting or dissolution, the crystal lattice breaks, therefore, a larger amount of energy is needed to melt or dissolve the p-isomer than the corresponding o- and m- isomers. In other words, the melting point of the p-isomer is higher and its solubility lower than the corresponding o- and m- isomers.

Teacher's Note: Melting point tracks packing in the crystal lattice; symmetry gives better packing, not higher polarity.

Exam Note: Link symmetry to lattice packing to energy needed.

Question 5. Draw the structures of the major monohalo product in each of the following reactions: (a) 1-ethyl-4-nitrobenzene + Br2/Fe; (b) 1-ethyl-4-nitrobenzene + Br2, heat or UV light; (c) CH3CH2C≡CH + HCl (1 equiv); (d) CH3CH2C(CH3)=CH2 + HBr, peroxide; (e) 1-methylcyclohexene + HI; (f) cyclohexene + Br2, heat or UV light; (g) cyclohexanol + SOCl2; (h) 4-hydroxybenzyl alcohol (HOC6H4CH2OH) + HCl, heat; (i) CH3CH2Br + NaI, acetone, reflux; (j) CH3CH2Br + Hg2F2. (N.C.E.R.T.) (Structures are drawn in the book; here they are given in words.)

Solution. (a) In presence of halogen carrier and absence of light, electrophilic substitution occurs at position ortho (since the p-position is already occupied) to the electron-donating CH2CH3 group. Product: 2-bromo-1-ethyl-4-nitrobenzene (Br on the ring, ortho to the ethyl group).

(b) In presence of light, side chain (free radical) halogenation occurs at the benzylic hydrogen. Product: 1-(1-bromoethyl)-4-nitrobenzene, O2N-C6H4-CHBrCH3.

(c) Markovnikov addition: CH3CH2C(Cl)=CH2 (2-chlorobut-1-ene).

(d) Peroxide, anti-Markovnikov addition: CH3CH2CH(CH3)CH2Br (1-bromo-2-methylbutane).

(e) Markovnikov addition: 1-iodo-1-methylcyclohexane (I and CH3 on the same ring carbon).

(f) Allylic bromination: 3-bromocyclohexene (Br on the carbon next to the C=C).

(g) Chlorocyclohexane + SO2 + HCl.

(h) Due to resonance, C-O bond in phenols is much stronger than C-O bond in alcohols and hence substitution occurs only at the alcoholic group. Product: 4-hydroxybenzyl chloride, HO-C6H4-CH2Cl + H2O.

(i) Finkelstein reaction: CH3CH2I + NaBr.

(j) Swarts reaction (halogen exchange): 2CH3CH2Br + Hg2F2 → 2CH3CH2F + Hg2Br2.

Teacher's Note: Condition decides site: Fe gives ring substitution, light gives side-chain; peroxide reverses addition orientation (HBr only).

Exam Note: Name reaction type and condition for each part.

Question 6. Give the structures of the main organic substitution product expected from the reaction of 1-bromobutane with (a) (CH3)3N (b) (CH3)2S (c) CH3COOAg (d) LiAlH4 (e) C2H5ONa. (N.C.E.R.T.)

Solution. (a) (CH3)3N + CH3CH2CH2CH2Br → [(CH3)3N+-CH2CH2CH2CH3] Br− (butyltrimethylammonium bromide)

(b) (CH3)2S + CH3CH2CH2CH2Br → [(CH3)2S+-CH2CH2CH2CH3] Br− (butyldimethylsulphonium bromide)

(c) CH3COOAg + CH3CH2CH2CH2Br → CH3COOCH2CH2CH2CH3 + AgBr (butyl ethanoate)

(d) LiAlH4 + 4CH3CH2CH2CH2Br → 4CH3CH2CH2CH3 + LiBr + AlBr3

(e) C2H5O−Na+ + CH3CH2CH2CH2Br → CH3CH2CH2CH2-O-C2H5 + NaBr (butyl ethyl ether; Williamson's synthesis)

Teacher's Note: Nucleophile attacks the carbon bearing Br in SN2; neutral amines and sulphides give charged onium salts.

Exam Note: Show the nucleophile replacing Br; name product.

Question 7. Give reagents, inorganic or organic, needed to convert benzyl bromide into (a) benzyl iodide (b) benzyl ethyl ether (c) benzyl alcohol (d) benzyl cyanide (e) benzyl acetate (f) (nitromethyl)benzene (g) tri-n-butylbenzylammonium bromide. (N.C.E.R.T.)

Solution. Corrected: in part (b) the book draws C6H5-O-CH2CH3 (phenyl ethyl ether); benzyl ethyl ether is C6H5CH2-O-CH2CH3.
ProductReagent
(a) C6H5CH2I (benzyl iodide)NaI / acetone
(b) C6H5CH2-O-CH2CH3 (benzyl ethyl ether)C2H5ONa (sodium ethoxide)
(c) C6H5CH2OH (benzyl alcohol)NaOH (aq)
(d) C6H5CH2CN (benzyl cyanide)KCN (alc.)
(e) CH3COOCH2C6H5 (benzyl acetate)CH3COOAg
(f) C6H5CH2NO2 (phenylnitromethane)AgNO2
(g) [(CH3CH2CH2CH2)3N+CH2C6H5] Br− (tri-n-butylbenzylammonium bromide)(CH3CH2CH2CH2)3N

Teacher's Note: Benzyl bromide is a reactive primary halide; AgNO2 gives nitro via N attack, KNO2 would give nitrite.

Exam Note: Match reagent to product; alc. KCN, aq. NaOH.

Question 8. RCl is hydrolysed to ROH slowly but the reaction is rapid if a catalytic amount of KI is added to the reaction mixture.

Solution. Iodide ion is a powerful nucleophile and hence reacts rapidly with RCl to form RI.

KI → K+ + I− ; I− + R-Cl → R-I + Cl−

Further because I− ion is a better leaving group than Cl− ion, therefore, RI is more rapidly hydrolysed than RCl to form ROH,

R-I + OH− → R-OH + I−

The I− ion thus regenerated recycles in the above reaction thereby explaining its catalytic effect.

Teacher's Note: I− is regenerated, so it is a true catalyst; two successive SN2 steps replace one slow step.

Exam Note: Show both steps; mention regeneration of I−.

Question 9. The treatment of alkyl chloride with aqueous KOH leads to the formation of alcohols but in presence of alcoholic KOH, alkenes are the major products. Explain why? (H.S.B. 1990 S; H.P.S.B. 1991)

Solution. In aqueous solution, KOH is almost completely ionized to give OH− ions which being a strong nucleophile brings about a substitution reaction on alkyl halides to form alcohols. Further in the aqueous solution, OH− ions are highly solvated (hydrated). This solvation reduces the basic character of OH− ions which, therefore, fail to abstract a hydrogen from the β-carbon of the alkyl halide to form an alkene.

In contrast, an alcoholic solution of KOH contains alkoxide (RO−) ions which being a much stronger base than OH− ions preferentially eliminates a molecule of HCl from an alkyl chloride to form alkenes.

Teacher's Note: Same reagent, different solvent: hydration weakens basicity in water, so substitution wins; alkoxide favours elimination.

Exam Note: Contrast aqueous (substitution) and alcoholic (elimination) KOH.

Question 10. Arrange the following halides in order of increasing SN2 reactivity: CH3Cl, CH3Br, CH3CH2Cl, (CH3)2CHCl. (N.C.E.R.T.)

Solution. As the size of the alkyl group increases, SN2 reactivity decreases. Further C-Br being weaker is easier to break than C-Cl bond. Therefore, the overall increasing SN2 reactivity follows the order: (CH3)2CHCl < CH3CH2Cl < CH3Cl < CH3Br.

Teacher's Note: SN2 needs backside access: less steric hindrance means faster; then weaker C-X bond ranks the same-alkyl pair.

Exam Note: Order by sterics, then leaving group.

Question 11. Predict the order of reactivity of the following compounds in SN1 reactions: chlorocyclohexane; 1-chloro-1-methylcyclohexane; 1-bromo-1-methylcyclohexane; 1-iodo-1-methylcyclohexane. (N.C.E.R.T.) (Drawn in the book as ring structures.)

Solution. The first compound is a 2° alkyl halide while all others are 3° alkyl halides. Since 3° alkyl halides are more reactive than 2° alkyl halides in SN1 reactions, therefore, first compound is the least reactive. Further reactivity increases in the order: chloride < bromide < iodide. Thus, the increasing order of reactivity in SN1 reactions is the same in which they are listed above.

Teacher's Note: SN1 rate follows carbocation stability (3° > 2°) and leaving-group ability (I > Br > Cl).

Exam Note: Give order and justify by carbocation and leaving group.

Question 12. Predict the order of reactivity of the following compounds in SN1 and SN2 reactions. (a) The four isomeric bromobutanes. (b) C6H5CH2Br, (C6H5)2CHBr, C6H5CH(CH3)Br, (C6H5)2C(CH3)Br. (N.C.E.R.T.)

Solution. (a) In SN1 reactions, the order of reactivity depends upon the stability of the intermediate carbocations, therefore, (CH3)3CBr which gives a 3° carbocation, i.e. (CH3)3C+ is the most reactive. CH3CH2CH(Cl)CH3 which gives a 2° carbocation, i.e. CH3CH2C+HCH3 and hence is less reactive than (CH3)3CBr. Out of the remaining two 1° alkyl halides, the carbocation (CH3)2CHCH2+ is more stable than the carbocation CH3CH2CH2CH2+ due to greater +I-effect of (CH3)2CHCH2-group w.r.t. CH3CH2CH2CH2-group and hence the alkyl halide, (CH3)2CHCH2Br is more reactive than CH3CH2CH2CH2Br. Thus the overall increasing reactivity of the four isomeric bromobutanes towards SN1 reaction follows the order:

CH3CH2CH2CH2Br < (CH3)2CHCH2Br < CH3CH2CH(Br)CH3 < (CH3)3CBr

The reactivity in SN2 reactions, however, follows the reverse order, i.e.,

CH3CH2CH2CH2Br > (CH3)2CHCH2Br > CH3CH2CH(Br)CH3 > (CH3)3CBr

since the steric hindrance around the electrophilic carbon (i.e. α-carbon) increases in that order.

(b) Since the reactivity in SN1 reactions increases as the stability of the intermediate carbocation increases, therefore, (C6H5)2C(CH3)Br which gives a 3° carbocation, i.e., (C6H5)2C+(CH3) is the most reactive. Of the two 2° bromides, the carbocation intermediate derived from (C6H5)2CHBr i.e. (C6H5)2CH+ is more stable as compared to the carbocation C6H5C+HCH3 obtained from C6H5CH(CH3)Br as it is stabilized by two phenyl groups due to resonance. The fourth alkyl bromide, C6H5CH2Br which gives the 1° carbocation, i.e., C6H5CH2+ is, however, the least reactive. Thus, the overall reactivity of these alkyl bromides towards SN1 reactions follows the order:

(C6H5)2C(CH3)Br > (C6H5)2CHBr > C6H5CH(CH3)Br > C6H5CH2Br

In SN2 reactions, it is the steric hindrance which determines the reactivity. Since a phenyl group is much bulkier than a methyl group, therefore, (C6H5)2C(CH3)Br is the least reactive followed by (C6H5)2CHBr and C6H5CH(CH3)Br while C6H5CH2Br is the most reactive. Thus the overall reactivity of these alkyl bromides towards SN2 reactions follows the order:

C6H5CH2Br > C6H5CH(CH3)Br > (C6H5)2CHBr > (C6H5)2C(CH3)Br

Teacher's Note: SN1 follows carbocation stability, SN2 follows steric openness; the two orders run opposite.

Exam Note: Give both orders separately, with reasons.

Question 13. Identify the possible alkenes that would be formed on dehydrohalogenation of the following organic halides with alcoholic KOH. Also identify the major alkene. (a) 1-Chloropentane (b) 2-Chloropentane (c) 2-Chloro-2-methylbutane (d) 2-Chloro-3-methylbutane (e) 3-Chloro-2-methylpentane. (N.C.E.R.T.)

Solution. Alc. KOH, heat; Saytzeff rule (the more substituted alkene is major).

(a) CH3CH2CH2CH2CH2Cl → CH3CH2CH2CH=CH2 (pent-1-ene, the only alkene).

(b) CH3CHClCH2CH2CH3 → CH3CH=CHCH2CH3 (pent-2-ene, major) + CH2=CHCH2CH2CH3 (pent-1-ene, minor).

(c) (CH3)2CClCH2CH3 → (CH3)2C=CHCH3 (2-methylbut-2-ene, major) + CH2=C(CH3)CH2CH3 (2-methylbut-1-ene, minor).

(d) CH3CHClCH(CH3)CH3 → (CH3)2C=CHCH3 (2-methylbut-2-ene, major) + CH2=CHCH(CH3)2 (3-methylbut-1-ene, minor).

(e) (CH3)2CHCHClCH2CH3 → (CH3)2C=CHCH2CH3 (2-methylpent-2-ene, major) + (CH3)2CHCH=CHCH3 (minor).

Corrected: in part (e) the book names the minor alkene 3-methylpent-2-ene, but the structure it draws, (CH3)2CHCH=CHCH3, is 4-methylpent-2-ene.

Teacher's Note: List every β-hydrogen set; the alkene with more alkyl groups on the C=C is major (Saytzeff).

Exam Note: Show all β-H eliminations, then mark major product.

Question 14. Arrange the following halides in the decreasing order of SN1 reactivity: CH3CH2CH2Cl (I), CH2=CHCHClCH3 (II) and CH3CH2CHClCH3 (III).

Solution. (i) In SN1 reactions, carbocations are the intermediates. Obviously more stable the carbocation, more reactive is the alkyl halide. Since alkyl halide (II) gives an allylic carbocation which is stabilized by resonance, therefore, alkyl halide (II) is the most reactive.

CH2=CH-CHCl-CH3 → (−Cl−, ionization) CH2=CH-C+H-CH3 ↔ C+H2-CH=CH-CH3

(ii) Out of alkyl halides (I) and (III), III gives a more stable 2° carbocation while I gives a less stable 1° carbocation, therefore, alkyl halide (III) is more reactive than alkyl halide (I).

CH3CH2CHCl-CH3 → CH3CH2C+H-CH3 (2° butyl carbocation, more stable); CH3CH2CH2Cl → CH3CH2C+H2 (1° propyl carbocation, less stable)

Thus from the above discussion, it follows that the overall reactivity in SN1 reaction follows the sequence: II > III > I.

Teacher's Note: Resonance-stabilised allylic cation beats a 2° cation, which beats a 1° cation.

Exam Note: Compare carbocation stability; state sequence II > III > I.

Question 15. Explain the following in one or two sentences. (i) Allyl chloride is hydrolysed more readily than n-propyl chloride. (ii) Vinyl chloride is hydrolysed more slowly than ethyl chloride.

Solution. (i) Allyl chloride readily undergoes ionization to produce resonance stabilized allyl carbocation. Since carbocations are reactive species, allyl cation readily combines with OH− ions to form allyl alcohol.

CH2=CH-CH2-Cl → (ionization, slow) [CH2=CH-CH2+ ↔ +CH2-CH=CH2] + Cl− → (OH−, fast) CH2=CH-CH2OH (allyl alcohol)

In contrast, n-propyl chloride does not undergo ionization to produce n-propyl carbocation and hence allyl chloride is hydrolysed more readily than n-propyl chloride.

(ii) Vinyl chloride may be represented as a resonance hybrid of the following two structures: CH2=CH-Cl: ↔ −CH2-CH=Cl+

As a result of resonance, the carbon-chlorine bond acquires some double bond character. In contrast, in ethyl chloride, the carbon-chlorine bond is a pure single bond. Thus, vinyl chloride undergoes hydrolysis more slowly than ethyl chloride.

Teacher's Note: Lone pair of Cl conjugates with C=C in vinyl chloride, strengthening C-Cl; allyl cation is resonance stabilised.

Exam Note: Name resonance in both parts; one or two sentences.

Question 16. Account for the following: Haloalkanes undergo nucleophilic substitutions whereas haloarenes undergo electrophilic substitutions. (A.I.S.B. 1997)

Solution. Haloalkanes are more polar than haloarenes. Consequently the carbon atom carrying the halogen in haloalkanes is more electron- deficient (more positively charged) than that in haloarenes. As a result, haloalkanes undergo nucleophilic substitutions more readily than haloarenes.

In contrast, haloarenes contain a benzene ring. Since the typical reactions of benzene are electrophilic substitutions, therefore, haloarenes undergo electrophilic substitutions while haloalkanes which do not contain a benzene ring do not undergo electrophilic substitutions.

Teacher's Note: Electron-rich benzene ring invites electrophiles; polar C-X carbon in alkyl halides invites nucleophiles.

Exam Note: Link ring type and polarity to reaction type.

Question 17. Out of the various possible isomers of C7H7Cl containing a benzene ring, suggest the structure with the weakest C-Cl bond.

Solution. Four isomers are possible: (i) benzyl chloride, C6H5CH2Cl; (ii) o-chlorotoluene; (iii) m-chlorotoluene; (iv) p-chlorotoluene (CH3 and Cl on the ring).

Just as in chlorobenzene, the C-Cl bond in o-, m- and p-chlorotoluenes has some double bond character due to resonance. In contrast, in benzyl chloride, the C-Cl bond is a pure single bond. Hence, out of the four isomers, the C-Cl bond is the weakest in benzyl chloride. Alternatively, the cleavage of C-Cl bond in benzyl chloride gives benzyl cation which is stabilized by resonance: C6H5CH2-Cl → (ionization, −Cl−) C6H5CH2+, which is a resonance hybrid of the structures with the + charge on the CH2 carbon and on the ortho and para ring carbons (resonance structures of benzyl cation).

On the other hand, cleavage of C-Cl bond in o-, m- or p-chlorotoluene gives tolyl cation which is highly unstable. As a result, the energy of activation for the cleavage of C-Cl bond in benzyl chloride is much smaller than that of C-Cl bond in o-, m- or p-chlorotoluenes. Consequently, the C-Cl bond is the weakest in benzyl chloride.

Teacher's Note: sp3 C-Cl on the side chain has no resonance partial double bond; aryl C-Cl does.

Exam Note: Pick benzyl chloride; give resonance and cation stability.

Question 18. An alkyl halide (A), on reaction with magnesium in dry ether followed by treatment with ethanol gave 2-methylbutane. Write all the possible structures of A. (N.C.E.R.T.)

Solution. The structures of all the possible alkyl halides that can be obtained by monohalogenation of 2-methylbutane are: (CH3)2CHCH2CH2Br (1-bromo-3-methylbutane); (CH3)2CHCH(Br)CH3 (2-bromo-3-methylbutane); BrCH2CH(CH3)CH2CH3 (1-bromo-2-methylbutane); (CH3)2C(Br)CH2CH3 (2-bromo-2-methylbutane).

The Grignard reagents of all these four alkyl halides will give 2-methylbutane on treatment with ethanol.

Teacher's Note: Grignard + alcohol replaces MgX by H, so A shares the carbon skeleton of the alkane.

Exam Note: Draw four monobromo isomers of 2-methylbutane.

Question 19. Explain the formation of two products in the following reaction. CH3CH=CHCH2Cl + H2O → CH3CH=CHCH2OH + CH3CH(OH)CH=CH2. (N.C.E.R.T.)

Solution. Ionization of the given allylic chloride gives a carbocation which is a resonance hybrid of structures (I and II). Nucleophilic attack by H2O followed by loss of a proton on either of these two carbocations gives the corresponding alcohols (III and IV).

CH3CH=CHCH2-Cl → (ionization) [CH3-CH=CH-C+H2 (I) ↔ CH3-C+H-CH=CH2 (II)] → (i) + H2O, (ii) −H+ → CH3CH=CHCH2OH (III) + CH3-CH(OH)-CH=CH2 (IV)

Teacher's Note: One delocalised cation has two electron-poor carbons; water can attack either, giving two alcohols.

Exam Note: Show both resonance forms of the allyl cation.

Question 20. An excess of methylmagnesium iodide reacts with 0.6 g of organic compound C3H6O3 to evolve 295.7 ml of methane gas at S.T.P. Calculate the number of active hydrogen atoms in the molecule of the organic compound. (N.C.E.R.T.)

Solution. Mol. mass of C3H6O3 = 3 × 12 + 6 × 1 + 3 × 16 = 90 g mol−1

0.6 g of the compound evolves CH4 = 295.7 ml at S.T.P.

∴ 90 g of the compound will evolve CH4 = (295.7/0.6) × 90 = 44355 ml at S.T.P.

No. of moles of CH4 produced = 44355/22400 = 1.980 = 2 (approx)

Thus 1 mole of the compound produces 2 moles of CH4, therefore, there are two active hydrogen atoms present in one molecule of the organic compound.

Teacher's Note: Each active H (O-H, N-H) releases one CH4 from CH3MgI; moles of CH4 per mole gives the count.

Exam Note: Scale to one mole; moles of CH4 = active H.

Question 21. What mass of propene is obtained from 34.0 g of 1-iodopropane on heating with ethanolic KOH, if the yield is 36%? (N.C.E.R.T.)

Solution. CH3CH2CH2I + KOH (alc.) → (Δ) CH3CH=CH2 + KI + H2O; 170 g gives 42 g.

Theoretical amount of propene formed from 34 g of CH3CH2CH2I = (42/170) × 34 = 8.4 g

Actual yield of propene = (8.4 × 36)/100 = 3.024 g

Teacher's Note: Compute theoretical mass from molar masses (170 and 42), then apply percentage yield.

Exam Note: Show theoretical yield first, then 36% of it.

Question 24. In each of the following reactions, a new ring is formed. Use curved arrow notations to explain the formation of new ring. (a) 1,4-Dibromobutane (0.1 mole) is treated with sodium sulphide (0.1 mole) in aqueous ethanol. (b) 1-Chloro-2-(2-hydroxyphenyl)ethane is treated with aqueous sodium hydroxide. (N.C.E.R.T.)

Solution. (a) Since 1,4-dibromobutane (0.1 mole) and Na2S (0.1 mole) are used in equimolar amounts, therefore, sulphide ion (S2−) displaces only one Br atom to form ion (I), BrCH2CH2CH2CH2-S− Na+ (−NaBr), which then undergoes intramolecular nucleophilic attack by S− on the C-Br carbon, forming the cyclic compound (II), tetrahydrothiophene (a five-membered ring of four CH2 groups and one S) (−NaBr).

(b) The given phenol dissolves in NaOH to form phenoxide (III) which then undergoes intramolecular nucleophilic attack by O− on the C-Cl carbon of the CH2CH2Cl chain, forming the cyclic compound (IV), 2,3-dihydrobenzofuran (a five-membered ring containing O, fused to the benzene ring) (−NaCl).

Teacher's Note: Intramolecular SN2 favours 5- and 6-membered rings; equimolar Na2S stops after first substitution.

Exam Note: Show S− or O− attacking the C-halogen carbon.

Very Short Answer Questions (Carrying 1 Mark)

Question VSA 1. Give the common and the IUPAC name for C6H5CH2CH2Cl.

Solution. Common: β-chloroethylbenzene; IUPAC: 1-chloro-2-phenylethane.

Teacher's Note: Name the longest chain (ethane) with chloro and phenyl as substituents; alphabetical order puts chloro first.

Exam Note: Give both names; locants 1 and 2.

Question VSA 2. Give the IUPAC and the trivial name of C6H6Cl6.

Solution. Trivial name: benzene hexachloride; IUPAC: 1,2,3,4,5,6-hexachlorocyclohexane.

Teacher's Note: C6H6Cl6 is saturated (addition product of benzene and Cl2), so it is a cyclohexane, not a benzene.

Exam Note: Write ring is cyclohexane; six locants.

Question VSA 3. What type of isomerism is shown by 1,2-dichloroethene?

Solution. cis-trans or geometrical isomerism.

Teacher's Note: Restricted rotation about C=C with a different atom on each carbon gives geometrical isomers.

Exam Note: Name geometrical isomerism; draw cis and trans.

Question VSA 4. Out of chlorobenzene and chloromethane which is more reactive towards nucleophilic substitution reactions?

Solution. Chloromethane since it is an alkyl halide.

Teacher's Note: In chlorobenzene, resonance gives C-Cl partial double bond character, so substitution is slow.

Exam Note: Alkyl halide beats aryl halide.

Question VSA 5. Which is a better nucleophile, a bromide ion or an iodide ion?

Solution. Iodide ion because of its bigger size and lower electronegativity.

Teacher's Note: Large, polarisable I− holds its electrons loosely and donates them easily.

Exam Note: Size and polarisability decide nucleophilicity here.

Question VSA 6. Write the structure of the main product obtained by the action of conc. H2SO4 on 2-methylbutan-1-ol.

Solution. 2-Methylbut-2-ene; the initially formed 1° carbocation rearranges to the more stable 3° carbocation by a 1,2-hydride shift which then eliminates a proton to give 2-methylbut-2-ene as the main product in accordance with the Saytzeff rule.

CH3CH2CH(CH3)CH2OH → (H2SO4) CH3CH2CH(CH3)CH2+ (1° carbocation, less stable) → (1,2-hydride shift) CH3CH2C+(CH3)2 (3° carbocation, more stable) → (−H+, Saytzeff elimination) CH3CH=C(CH3)2 (2-methylbut-2-ene)

Teacher's Note: Primary carbocation rearranges before it can eliminate; always check for hydride shift in acid dehydration.

Exam Note: Show hydride shift, then Saytzeff alkene.

Question VSA 7. A hydrocarbon C5H10 does not react with chlorine in dark but gives a single monochloro compound C5H9Cl in bright sunlight. Identify the hydrocarbon. (N.C.E.R.T.)

Solution. The compound C5H10 contains one site of unsaturation but behaves like a saturated compound. Since it gives a single monochloro derivative, therefore, it must be symmetrical, i.e. cyclopentane.

Teacher's Note: No addition of Cl2 in dark rules out an alkene; ring with one degree of unsaturation fits.

Exam Note: Argue: no addition, one monochloro product, so cyclopentane.

Question VSA 8. A hydrocarbon C5H12 gives one monochlorination product. Identify the hydrocarbon. (N.C.E.R.T.)

Solution. C5H12 gives only one monochloroderivative, i.e., all the hydrogens are equivalent. It must be neopentane.

Teacher's Note: Only neopentane, (CH3)4C, has all twelve H equivalent among pentane isomers.

Exam Note: Equivalent hydrogens give one product; name neopentane.

Question VSA 9. Which compound in each of the following pairs will react faster in SN2 reaction with OH−? (a) CH3Br or CH3I (b) (CH3)3CCl or CH3Cl (c) CH2=CHBr or CH2=CHCH2Br. (N.C.E.R.T.)

Solution. (a) CH3I because iodides are more reactive than bromides.

(b) CH3Cl because 1° alkyl halides are more reactive than 3° alkyl halides in SN2 reactions.

(c) CH2=CHCH2Br because allyl halides are more reactive than vinyl halides.

Teacher's Note: SN2 favours better leaving group, less crowding, and no partial double bond on the C-X carbon.

Exam Note: Name the faster compound with one reason each.

Question VSA 10. What happens when chlorine is passed through boiling toluene in the presence of sunlight? (I.I.T. 1987)

Solution. Free radical substitution occurs at the methyl group giving first benzyl chloride, then benzal dichloride and finally benzotrichloride.

Teacher's Note: Sunlight and heat favour side-chain radical substitution; ring chlorination needs a Lewis acid instead.

Exam Note: Write the three successive products: C6H5CH2Cl, CHCl2, CCl3.

Question VSA 11. Write the structures of the possible isomers of dichloroethene. Which of them will have zero dipole moment? (I.I.T. 1985)

Solution. Three isomers: (i) cis-1,2-dichloroethene, ClCH=CHCl with both Cl on the same side (μ > 0); (ii) trans-1,2-dichloroethene with Cl on opposite sides (μ = 0); (iii) 1,1-dichloroethene, CH2=CCl2 (μ > 0). The trans-1,2-isomer has zero dipole moment because the two C-Cl bond dipoles cancel.

Teacher's Note: Zero dipole needs bond dipoles that cancel, which needs opposite sides of the double bond.

Exam Note: Draw all three; trans-1,2 has μ = 0.

Question VSA 12. Describe a method for the preparation of haloarenes from diazonium salts.

Solution. By treatment with CuCl/HCl or CuBr/HBr (Sandmeyer reaction) or treatment of diazonium salts with KI in presence of copper powder.

C6H5N2Cl → (CuCl/HCl or CuBr/HBr, or KI + Cu powder) C6H5X (X = Cl, Br or I)

Fluorobenzene is, however, prepared by Balz-Schiemann reaction as follows:

C6H5N2Cl → (HBF4, −HCl) C6H5N2BF4 → (Δ) C6H5F + N2 + BF3

Teacher's Note: Iodide needs no Cu salt; fluoride goes via the isolable fluoroborate (Balz-Schiemann).

Exam Note: Name Sandmeyer and Balz-Schiemann with reagents.

Question VSA 13. Give one example (with equation) of Wurtz-Fittig reaction. (P.S.B. 1990 S)

Solution. C6H5Cl + 2Na + ClCH3 → (dry ether, Δ) C6H5CH3 + 2NaCl

Teacher's Note: Wurtz-Fittig couples an aryl halide with an alkyl halide using sodium in dry ether.

Exam Note: Include dry ether and both halides.

Question VSA 14. What effect should the following resonance of vinyl chloride have on its dipole moment? CH2=CH-Cl: ↔ −CH2-CH=Cl+ (I.I.T. 1987)

Solution. This resonance effect decreases the dipole moment of vinyl chloride relative to ethyl chloride.

Teacher's Note: Resonance pushes Cl lone pair toward carbon, opposing the inductive pull to Cl.

Exam Note: Say decreases; opposes -I effect of Cl.

Question VSA 15. Name the product formed when benzene is treated with excess of chlorine in presence of sunlight.

Solution. In presence of sunlight addition occurs to give benzene hexachloride.

Teacher's Note: Without Lewis acid and with light, benzene adds Cl2 (free radical) rather than substitutes.

Exam Note: Addition, not substitution; C6H6Cl6.

Question VSA 16. Which compounds give iodoform test?

Solution. Compounds containing CH3CHOH- or CH3CO- group linked to either carbon or hydrogen.

Teacher's Note: Methyl ketones and secondary alcohols with CH3CH(OH) unit give yellow iodoform with I2/NaOH.

Exam Note: State both groups: CH3CO- and CH3CH(OH)-.

Question VSA 17. Give one chemical test to distinguish between C2H5Br and C6H5Br. (A.I.S.B. 1991 S)

Solution. Hydrolysis of C2H5Br with refluxing aqueous KOH followed by acidification with dil. HNO3 and subsequent treatment with AgNO3 gives light yellow ppt. of AgBr whereas C6H5Br does not give this test.

Teacher's Note: Acidify before AgNO3 to avoid Ag2O; aryl bromide does not hydrolyse under these mild conditions.

Exam Note: Mention acidification with HNO3 and pale yellow AgBr.

Question VSA 18. Which alkyl halide has the highest density and why?

Solution. CH3I; because of its smallest carbon content and heaviest halogen i.e. I.

Teacher's Note: Density rises with halogen mass fraction; iodine dominates the molar mass of CH3I.

Exam Note: Link density to heavy iodine in a small molecule.

Question VSA 19. Explain why thionyl chloride method is preferred for preparing alkyl chlorides from alcohols?

Solution. Because the by products of the reaction, i.e., SO2 and HCl being gases escape into the atmosphere leaving behind alkyl chlorides in almost pure state.

Teacher's Note: Gaseous by-products leave on their own, so no separation step is needed.

Exam Note: Name SO2 and HCl gases; pure product.

Question VSA 20. Draw the structure and give the chemical name of DDT.

Solution. For structure, refer to the text. Its chemical name is 2,2-bis(4-chlorophenyl)-1,1,1-trichloroethane. (Structure: (p-ClC6H4)2CH-CCl3.)

Teacher's Note: DDT is two p-chlorophenyl rings on one carbon, which carries the CCl3 group.

Exam Note: Write (ClC6H4)2CHCCl3 with the IUPAC name.

Question VSA 21. Iodoform gives precipitate with silver nitrate on heating but chloroform does not. Explain.

Solution. C-I bond is much weaker (bond energy 234 kJ mol−1) than C-Cl bond (bond energy 351 kJ mol−1). Therefore, when CHI3 is heated, C-I bond breaks easily to give I− ions which react with AgNO3 solution to give yellow ppt of AgI. On the other hand when CHCl3 is heated C-Cl bond does not break to give Cl− ions and hence ppt. of AgCl is not formed.

Teacher's Note: Weaker bond to a larger halogen ionises more readily and releases halide to precipitate with Ag+.

Exam Note: Quote bond energies; yellow AgI formed.

Question VSA 22. Under what conditions, 2-methylpropene can be converted into isobutyl bromide? (I.I.T. 1984)

Solution. In presence of peroxides anti-Markovnikov's addition of HBr to 2-methylpropene gives isobutyl bromide.

Teacher's Note: Peroxide generates Br radical which adds to the less hindered carbon, giving the 1° bromide.

Exam Note: HBr plus peroxide; only HBr shows peroxide effect.

Question VSA 23. Write the structural formula of 4-chloro-2-pentene. (I.I.T. 1988)

Solution. CH3CH=CHCHClCH3.

Teacher's Note: Number so the double bond gets 2; chlorine then sits on C4.

Exam Note: Five carbon chain, C=C at 2, Cl at 4.

Question VSA 24. Arrange the following in order of increasing ease towards nucleophilic substitution: 4-nitrochlorobenzene, chlorobenzene, 2,4,6-trinitrochlorobenzene, 2,4-dinitrochlorobenzene.

Solution. Chlorobenzene < 4-Nitrochlorobenzene < 2,4-Dinitrochlorobenzene < 2,4,6-Trinitrochlorobenzene.

Teacher's Note: Each ortho/para nitro group stabilises the Meisenheimer intermediate by delocalising the negative charge.

Exam Note: More ortho/para NO2 groups mean faster substitution.

Question VSA 25. Arrange the following in order of increasing boiling point: (i) CH3CH2CH2CH2Br (ii) (CH3)3CBr (iii) (CH3)2CHCH2Br.

Solution. The b.p. increases as the branching decreases, i.e., (CH3)3CBr < (CH3)2CHCH2Br < CH3CH2CH2CH2Br.

Teacher's Note: Isomers: more branching, less surface contact, weaker van der Waals forces, lower boiling point.

Exam Note: Same formula, so order by branching.

Question VSA 26. Arrange the following in increasing order of reactivity towards sulphonation with fuming sulphuric acid: benzene, toluene, methoxybenzene, chlorobenzene. (I.I.T. 1988)

Solution. Reactivity increases as the electron density in the benzene ring increases, i.e., Chlorobenzene < Benzene < Toluene < Methoxybenzene.

Teacher's Note: Electrophilic substitution speeds up with electron-donating groups; Cl withdraws by -I more than it donates.

Exam Note: Rank by ring electron density: OCH3 > CH3 > H > Cl.

Question VSA 27. How will you obtain 1-bromopropane from propene?

Solution. With HBr in presence of peroxides (CH3CH=CH2 → (HBr, peroxides) CH3CH2CH2Br).

Teacher's Note: Peroxide effect reverses orientation, giving the 1° bromide.

Exam Note: HBr with peroxide, anti-Markovnikov.

Question VSA 28. Arrange the following in order of their increasing reactivity in nucleophilic substitution reactions: CH3F, CH3I, CH3Br, CH3Cl. (I.I.T. 1992)

Solution. Reactivity increases as the carbon-halogen bond dissociation energy decreases, i.e., CH3F < CH3Cl < CH3Br < CH3I.

Teacher's Note: Weaker C-X bond and better leaving group (I−) speed up substitution.

Exam Note: Order follows leaving-group ability: F < Cl < Br < I.

Question VSA 29. Write a chemical reaction to illustrate Saytzeff's rule. (H.P.S.B. 1994)

Solution. CH3CHBrCH2CH3 → (alc. KOH, Δ) CH3CH=CHCH3 (80%) + CH3CH2CH=CH2 (20%)

Teacher's Note: Saytzeff: the more substituted (more stable) alkene predominates in dehydrohalogenation.

Exam Note: Give 2-bromobutane with alc. KOH and mark but-2-ene major.

Question VSA 30. Name the alkyl halide which can be used to prepare methane and ethane in single steps.

Solution. Methyl iodide (CH3I). CH3I + HI → (red P, Δ) CH4 + I2

2CH3I + 2Na → (dry ether, Wurtz reaction) CH3-CH3 + 2NaI

Teacher's Note: Reduction with HI/red P gives the alkane of same carbon count; Wurtz doubles the chain.

Exam Note: Name CH3I; give both reactions.

Question VSA 31. How is DDT prepared? (P.S.B. 2001)

Solution. DDT is prepared by condensation of chlorobenzene with chloral, i.e., trichloroacetaldehyde in presence of conc. H2SO4. For equation, refer to the text.

Teacher's Note: Two chlorobenzene molecules condense with CCl3CHO; sulphuric acid is the condensing agent.

Exam Note: Chlorobenzene + chloral, conc. H2SO4.

Question VSA 32. What happens when chlorobenzene is treated with sodamide in liquid ammonia? (West Bengal J.E.E. 2001)

Solution. Aniline is formed via intermediate formation of benzyne. For equation, refer to the text on page 7/29-7/30.

Teacher's Note: Elimination-addition: NaNH2 removes ortho H and Cl, giving benzyne; NH2− then adds.

Exam Note: Mention benzyne intermediate and aniline.

Short Answer Questions (Carrying 2 or 3 Marks)

Question SA 1. Name the following halides according to IUPAC system and classify them as alkyl, allylic, benzylic (primary, secondary, tertiary), vinylic or aryl halides. (a) (CH3)2CHCH(Cl)CH3 (b) CH3CH2CH(CH3)CH(C2H5)Cl (c) CH3CH2C(CH3)2CH2I (d) (CH3)3CCH2CH(Br)C6H5 (e) CH3CH(CH3)CH(Br)CH3 (f) CH3C(Cl)(C2H5)CH2CH3 (g) CH3C(C2H5)2CH2Br (h) CH3CH=C(Cl)CH2CH(CH3)2 (i) CH3CH=CHC(Br)(CH3)2 (j) p-ClC6H4CH2CH(CH3)2 (k) m-ClCH2C6H4CH2C(CH3)3 (l) o-Br-C6H4CH(CH3)CH2CH3. (N.C.E.R.T.)

Solution. (a) 2-Chloro-3-methylbutane, 2° alkyl halide
(b) 3-Chloro-4-methylhexane, 2° alkyl halide
(c) 1-Iodo-2,2-dimethylbutane, 1° alkyl halide
(d) 1-Bromo-3,3-dimethyl-1-phenylbutane, 2° benzylic halide
(e) 2-Bromo-3-methylbutane, 2° alkyl halide
(f) 3-Chloro-3-methylpentane, 3° alkyl halide
(g) 1-Bromo-2-ethyl-2-methylbutane, 1° alkyl halide
(h) 3-Chloro-5-methylhex-2-ene, vinylic halide
(i) 4-Bromo-4-methylpent-2-ene, allylic halide
(j) 1-(4-Chlorophenyl)-2-methylpropane, aryl halide
(k) 1-Chloromethyl-3-(2,2-dimethylpropyl)benzene, 1° benzylic halide
(l) 1-Bromo-2-(1-methylpropyl)benzene, aryl halide

Corrected: the book prints (d) as 1-bromo-2,2-dimethyl-1-phenylbutane and (g) as 1-bromo-2-ethyl-2-methylpentane; the correct names from the structures are as written above.

Teacher's Note: Classify by where halogen sits: sp3 carbon (alkyl, allylic, benzylic), C=C carbon (vinylic), ring carbon (aryl).

Exam Note: Name, then degree (1°/2°/3°) or type.

Question SA 2. Give the IUPAC names of the following compounds: (a) CH3CH(Cl)CH(Br)CH3 (b) CHF2CBrClF (c) ClCH2C≡CCH2Br (d) (CCl3)3CCl (e) CH3C(p-ClC6H4)2CH(Br)CH3 (f) (CH3)3CCH=C(Cl)C6H4I-p (g) CH3CHCl(CH2)2CCl2C2H5. (N.C.E.R.T.)

Solution. (a) 2-Bromo-3-chlorobutane
(b) 1-Bromo-1-chloro-1,2,2-trifluoroethane
(c) 1-Bromo-4-chlorobut-2-yne
(d) 2-Trichloromethyl-1,1,1,2,3,3,3-heptachloropropane
(e) 3-Bromo-2,2-bis(4-chlorophenyl)butane
(f) 1-Chloro-1-(4-iodophenyl)-3,3-dimethylbut-1-ene
(g) 2,5,5-Trichloroheptane

Corrected: in part (e) the book's printed answer, 2,2-bis(4-chlorophenyl)butane, omits the bromine; the correct name is 3-bromo-2,2-bis(4-chlorophenyl)butane.

Teacher's Note: Choose the longest chain with the most substituents, lowest locants, and list prefixes alphabetically.

Exam Note: Parent chain, lowest locants, alphabetical prefixes.

Question SA 3. Write the structures of the following organic halogen compounds: (a) 2-Chloro-3-methylpentane (b) p-Bromochlorobenzene (c) 1-Chloro-4-ethylcyclohexane (d) 2-(2-Chlorophenyl)-1-iodooctane (e) Perfluorobenzene (f) 4-tert-Butyl-3-iodoheptane (g) 1-Bromo-4-sec-butyl-2-methylbenzene (h) 1,4-Dibromobut-2-ene. (N.C.E.R.T.) (Structures are drawn in the book; given here as formulae.)

Solution. (a) CH3CH(Cl)CH(CH3)CH2CH3
(b) Br-C6H4-Cl (Br and Cl para on a benzene ring)
(c) cyclohexane ring with Cl on C1 and C2H5 on C4
(d) ICH2-CH(C6H4Cl-2)-(CH2)5CH3
(e) C6F6 (benzene ring with six F atoms)
(f) CH3CH2CH(I)CH[C(CH3)3]CH2CH2CH3
(g) benzene ring with Br at C1, CH3 at C2 and CH(CH3)CH2CH3 at C4
(h) BrCH2CH=CHCH2Br

Corrected: the book's drawing for (a) has only a four-carbon chain (2-chloro-3-methylbutane), and for (g) shows an isobutyl group, CH3CH(CH3)CH2-; the structures above are the correct ones for the names asked.

Teacher's Note: Build the parent chain from the name first, then attach substituents at their locants.

Exam Note: Draw parent chain; place each substituent by locant.

Question SA 9. Write the structural formulae and IUPAC names of two optically active halides containing five carbon atoms each. (P.S.B. 1988)

Solution. 2-Bromopentane and 1-bromo-2-methylbutane.

Teacher's Note: A chiral carbon needs four different groups; both bromides have a stereocentre at C2.

Exam Note: Mark the chiral carbon with its four groups.

Question SA 10. How many primary halides are possible for the molecular formula C5H11Br? Give their structures and IUPAC names.

Solution. Four. (The book refers to Q. 1 on page 17/6 for the structures and names, which are outside this page range. They are 1-bromopentane, 1-bromo-2-methylbutane, 1-bromo-3-methylbutane and 1-bromo-2,2-dimethylpropane.)

Teacher's Note: Count pentane skeletons (n-pentane, isopentane, neopentane) and put Br on each terminal-type carbon.

Exam Note: List by carbon skeleton to avoid repeats.

Question SA 29. Arrange the following compounds in increasing order of SN1 reactivity: (a) ClCH2CH=CHCH2CH3, CH3C(Cl)=CHCH2CH3, CH3CH=CHCH2CH2Cl (b) CH3CH2Br, CH2=CHBr, CH3CH(Br)CH3, CH2=CHCH(Br)CH3 (c) (CH3)3CCl, C6H5C(CH3)2Cl, (CH3)2CHCl, CH3CH2CH2Cl. (N.C.E.R.T.)

Solution. (a) CH3C(Cl)=CHCH2CH3 < CH3CH=CHCH2CH2Cl < ClCH2CH=CHCH2CH3

(b) CH2=CHBr < CH3CH2Br < CH3CH(Br)CH3 < CH2=CHCH(Br)CH3

(c) CH3CH2CH2Cl < (CH3)2CHCl < (CH3)3CCl < C6H5C(CH3)2Cl

Teacher's Note: SN1 rate tracks carbocation stability: vinylic is worst, then 1° < 2° < 3° < allylic or benzylic.

Exam Note: Rank by carbocation stability; justify each pair.

Question SA 30. Predict all the alkenes that would be formed by dehydrohalogenation of the following halides with sodium ethoxide in ethanol and identify the major alkene: (a) 1-Bromo-1-methylcyclohexane (b) Cyclohexylmethyl bromide (c) 2-Chloro-2-methylbutane (d) 3-Bromopent-1-ene (e) 2,2,3-Trimethyl-3-bromopentane. (N.C.E.R.T.)

Solution. (a) 1-Methylcyclohexene (major) + methylenecyclohexane (minor)

(b) Methylenecyclohexane is the only alkene possible. Corrected: the book says 'same as in (a)'; in cyclohexylmethyl bromide the only β-hydrogen is on the ring carbon attached to CH2Br, so 1-methylcyclohexene cannot form.

(c) 2-Methylbut-2-ene (major) + 2-methylbut-1-ene (minor)

(d) Penta-1,3-diene (the only product)

(e) 3,4,4-Trimethylpent-2-ene, CH3CH=C(CH3)C(CH3)3 (major) + 2-ethyl-3,3-dimethylbut-1-ene, CH2=C(C2H5)C(CH3)3 (minor). Corrected: the book names the minor product 2,3,3-trimethylbut-1-ene, which has one carbon too few for C8H16.

Teacher's Note: Count distinct β-hydrogens on each side of C-X; with none on a branch, only one alkene is possible.

Exam Note: List each β-H elimination; major is the more substituted alkene.

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 17 Organic Compounds With Functional Groups Containing Halogens Part 2

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 17 Organic Compounds With Functional Groups Containing Halogens Part 2 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your Class 11 Exam Preparation

In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.