Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 16 Purification Characterisation Of Carbon Compounds Part 2

Pradeep's KL Gogia Solutions for Class 11 Chemistry: Chapter 16 Purification Characterisation Of Carbon Compounds

Explore reliable textbook solutions for Chapter 16 Purification Characterisation Of Carbon Compounds tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 11 Chemistry Solutions: Chapter 16 Purification Characterisation Of Carbon Compounds

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chapter 16 Purification and Characterisation of Carbon Compounds - Part 2 (pages 16/32 to 16/62)

16.5.3 Determination of molecular mass by titration (bases) - Example and Problems for Practice

Question Example 16.11 (titration). 0.16 g of a dibasic organic acid required 25.0 cm3 of M/10 NaOH for complete neutralization. Calculate its molecular mass.

Solution. 25.0 cm3 of M/10 NaOH neutralize 0.16 g of acid. So 1000 cm3 of 1 M NaOH neutralize (0.16/25.0) × 1000 × 10 g = 64 g. Since 1000 cm3 of 1 M NaOH contains one mole of NaOH, mass of acid neutralized by one mole of NaOH = 64 g. Basicity of the acid (n) = 2, so molar mass of the acid = 64 × 2 = 128 g mol-1.

Teacher's Note: Mass neutralized by one mole of NaOH is the equivalent mass; multiply by basicity to get molar mass.

Exam Note: Forgetting to multiply by basicity loses the last mark.

Question Problem for Practice 1 (after Example 16.11, titration). 0.075 g of a monobasic acid requires 10 cm3 of M/12 NaOH for complete neutralization. Calculate the molecular mass of the acid.

Solution. Printed answer: 90. (Check: NaOH used = 10/12 mmol = 0.833 mmol; monobasic, so M = 0.075/0.000833 = 90.)

Teacher's Note: Monobasic acid: moles of acid equal moles of NaOH used.

Exam Note: Show moles of NaOH first, then divide mass by moles.

Question Problem for Practice 2 (after Example 16.11, titration). 7.5 g of a dibasic acid are dissolved per litre of the given solution. 20 cm3 of this acid solution required 25 cm3 of M/15 NaOH solution for complete neutralization. Calculate the equivalent mass and molecular mass of the acid.

Solution. Printed answer: equivalent mass 90 and molecular mass 180. (Check: 20 cm3 contain 0.15 g; NaOH = 25/15 = 1.667 mmol; equivalent mass = 0.15/0.001667 = 90; molecular mass = 90 × 2 = 180.)

Teacher's Note: Equivalent mass comes from the NaOH moles; molecular mass = equivalent mass × basicity.

Exam Note: Compute mass per 20 cm3 from g per litre first.

16.5.4 Victor Meyer's method for molecular mass of volatile liquids

Question Example 16.12. 0.1693 g of a volatile substance when vaporized displaced 58.9 cm3 of air measured at 27°C and 746 mm pressure. Calculate the molecular mass of the substance (Aqueous tension at 27°C = 26.7 mm Hg).

Solution. Step 1. Convert the volume to STP. Experimental: P1 = 746 - 26.7 = 719.3 mm, V1 = 58.9 cm3, T1 = 273 + 27 = 300 K. At STP: P2 = 760 mm, V2 = ?, T2 = 273 K. From P1V1/T1 = P2V2/T2: V2 = (719.3 × 58.9 × 273)/(300 × 760) = 50.73 cm3.
Step 2. 50.73 cm3 of vapour at STP weigh 0.1693 g, so 22400 cm3 weigh (0.1693 × 22400)/50.73 = 74.75 g. Hence molecular mass of the substance = 74.75.

Teacher's Note: Air is collected over water, so subtract aqueous tension before applying the gas equation.

Exam Note: Marks: pressure correction, STP conversion, then 22400 cm3 step.

Question Problem for Practice 1 (after Example 16.12, Victor Meyer). 0.150 g of a volatile liquid when treated in Victor Meyer's apparatus displaced 40.5 cm3 of air collected over water at 288 K and 746 mm pressure. Calculate the molecular weight of the liquid (Aqueous tension at 288 K = 13.7 mm).

Solution. Printed answer: 90.8. (Check: P = 746 - 13.7 = 732.3 mm; V at STP = 732.3 × 40.5 × 273/(288 × 760) = 36.99 cm3; M = 0.150 × 22400/36.99 = 90.8.)

Teacher's Note: Dry-air pressure = barometric minus aqueous tension, then reduce to STP.

Exam Note: Write all three steps: P correction, V at STP, M.

Question Problem for Practice 2 (after Example 16.12, Victor Meyer). 0.162 g of a volatile liquid displaced in a Victor Meyer's apparatus 35 ml of air at 296 K and 745 mm pressure. Calculate the molecular mass of the substance. (Aqueous tension at 296 K is 25 mm and 1 ml of hydrogen at NTP weighs 0.00009 g).

Solution. Printed answer: 118.6. (Check: P = 745 - 25 = 720 mm; V at STP = 720 × 35 × 273/(296 × 760) = 30.58 ml; M = 0.162 × 22400/30.58 = 118.66.)

Teacher's Note: Same method as Example 16.12; 22400 ml is the molar volume at STP.

Exam Note: Quote the answer as about 118.6 with units g mol-1.

16.6 Empirical and Molecular Formulae - Problems on calculation of empirical and molecular formulae

Question Example 16.11 (empirical formula). An organic compound contains C = 61.00%, H = 11.88% and O = 27.12%. Calculate the empirical and molecular formulae of the compound. Molecular mass of the compound is 118.

Solution. (a) Empirical formula.
ElementPercentageAtomic massRelative no. of atomsSimplest atomic ratioSimplest whole no. atomic ratio
Carbon61.001261.00/12 = 5.085.08/1.70 = 2.993
Hydrogen11.88111.88/1 = 11.8811.88/1.70 = 6.97
Oxygen27.121627.12/16 = 1.701.70/1.70 = 11

Hence the empirical formula is C3H7O.

(b) Molecular formula. Empirical formula (C3H7O) mass = 3 × 12 + 7 × 1 + 1 × 16 = 59. n = molecular mass/empirical formula mass = 118/59 = 2. Molecular formula = 2 × C3H7O = C6H14O2.

Teacher's Note: Divide percentages by atomic masses, then by the smallest; n = molecular mass / empirical mass.

Exam Note: Present the table; state both empirical and molecular formulae.

Question Example 16.13. 0.45 g of an organic compound gave on combustion 0.792 g of CO2 and 0.324 g of water. 0.24 g of the same substance was Kjeldahlised and the ammonia liberated was absorbed in 50.0 cm3 of N/4 H2SO4. The excess acid required 77.0 cm3 of N/10 NaOH for complete neutralisation. Calculate the empirical formula of the compound.

Solution. (a) Percentage composition. (i) % C = (12/44) × (0.792/0.45) × 100 = 48.0. (ii) % H = (2/18) × (0.324/0.45) × 100 = 8.0. (iii) % N: 50.0 cm3 N/4 H2SO4 = 12.5 cm3 1 N H2SO4. 77.0 cm3 N/10 NaOH = 7.7 cm3 1 N. Acid neutralized by NH3 = 12.5 - 7.7 = 4.8 cm3 of 1 N. 1000 cm3 1 N NH3 contains N = 14 g, so 4.8 cm3 contain (14/1000) × 4.8 = 0.0672 g. % N = (0.0672/0.24) × 100 = 28.0. (iv) % O = 100 - (48.0 + 8.0 + 28.0) = 16.0.
(b) Empirical formula.
ElementPercentageAtomic massRelative no. of atomsSimplest atomic ratioSimplest whole no.
Carbon48.012444
Hydrogen8.01888
Nitrogen28.014222
Oxygen16.016111
Hence the empirical formula is C4H8N2O.

Teacher's Note: Kjeldahl nitrogen uses acid consumed by ammonia (acid taken minus excess); oxygen by difference.

Exam Note: Use 0.24 g for nitrogen and 0.45 g for C and H.

Question Example 16.14. 0.246 g of an organic compound containing 58.53% carbon and 4.06% hydrogen gave 22.4 cm3 of nitrogen at STP. What is the empirical formula of the compound?

Solution. (a) % C = 58.53, % H = 4.06 (given). 22400 cm3 of N2 at STP weigh 28 g, so 22.4 cm3 weigh (28/22400) × 22.4 = 0.028 g. % N = (0.028/0.246) × 100 = 11.38. % O = 100 - (58.53 + 4.06 + 11.38) = 26.03.
(b)
ElementPercentageAtomic massRelative no. of atomsSimplest atomic ratioSimplest whole no.
Carbon58.53124.884.88/0.813 = 66
Hydrogen4.0614.064.06/0.813 = 55
Nitrogen11.38140.81311
Oxygen26.03161.631.63/0.813 = 22
Hence the empirical formula is C6H5NO2.

Teacher's Note: Percent N comes from the N2 volume at STP (22.4 cm3 is 0.028 g).

Exam Note: Oxygen is found by difference; show the ratio table.

Question Example 16.15. (N.C.E.R.T.) 0.246 g of an organic compound gave 0.198 g of carbon dioxide and 0.1014 g of water on complete combustion. 0.37 g of the compound gave 0.638 g of silver bromide. What is the molecular formula of the compound if its molecular mass is 109?

Solution. (a) % C = (12/44) × (0.198/0.246) × 100 = 21.95. % H = (2/18) × (0.1014/0.246) × 100 = 4.58. % Br = (80/188) × (0.638/0.37) × 100 = 73.37. The compound contains no oxygen since 21.95 + 4.58 + 73.37 = 99.90 which is approximately 100.
(b)
ElementPercentageAtomic massRelative no. of atomsSimplest atomic ratioSimplest whole no.
Carbon21.95121.831.83/0.917 = 22
Hydrogen4.5814.584.58/0.917 = 55
Bromine73.37800.91711
Empirical formula = C2H5Br.
(c) Empirical formula mass = 2 × 12 + 5 × 1 + 80 = 109; n = 109/109 = 1. Molecular formula = C2H5Br.

Teacher's Note: Halogen percent uses mass of silver halide: Br = 80/188 of AgBr.

Exam Note: Check the total is about 100% to justify no oxygen.

Question Example 16.16. (N.C.E.R.T.) On analysis, 0.2 g of a monobasic acid gave 0.505 g of CO2 and 0.0864 g of H2O. 0.305 g of this acid required 25 cm3 of M/10 NaOH for complete neutralization. Find the molecular formula of the acid.

Solution. (a) % C = (12/44) × (0.505/0.2) × 100 = 68.86. % H = (2/18) × (0.0864/0.2) × 100 = 4.8. % O = 100 - (68.86 + 4.8) = 26.34.
(b) Empirical formula:
ElementPercentageAtomic massRelative no. of atomsSimplest atomic ratioSimplest whole no.
Carbon68.86125.745.74/1.65 = 3.487
Hydrogen4.8014.804.80/1.65 = 2.916
Oxygen26.34161.651.65/1.65 = 1.002
Empirical formula = C7H6O2.
(c) Molecular mass: 25 cm3 of M/10 NaOH neutralize 0.305 g of acid, so 25 cm3 of 1 M NaOH neutralize 10 × 0.305 g and 1000 cm3 of 1 M NaOH neutralize (10 × 0.305/25) × 1000 = 122 g. Mass of acid neutralized by 1 mole of NaOH = 122; basicity = 1; molecular mass = 122 × 1 = 122.
(d) Empirical formula mass (C7H6O2) = 7 × 12 + 6 × 1 + 16 × 2 = 122, so n = 122/122 = 1. Molecular formula = C7H6O2.

Teacher's Note: Two separate samples: 0.2 g for combustion, 0.305 g for titration; basicity 1 gives M directly.

Exam Note: Scale 3.48 : 2.91 : 1 by 2.

Question Example 16.17. An acid of molecular mass 104 contains 34.6% carbon, and 3.85% hydrogen. 3.812 mg of the acid required 7.33 cm3 of 0.01 M NaOH for neutralization. Suggest a structure for the acid.

Solution. (a) % C = 34.6, % H = 3.85 (given); % O = 100 - (34.6 + 3.85) = 61.55.
(b) Empirical formula:
ElementPercentageAtomic massRelative no. of atomsSimplest atomic ratioSimplest whole no.
Carbon34.6122.892.89/2.89 = 13
Hydrogen3.8513.853.85/2.89 = 1.304
Oxygen61.55163.853.85/2.89 = 1.304
Empirical formula = C3H4O4.
(c) Empirical formula mass = 3 × 12 + 4 × 1 + 4 × 16 = 104 = given molecular mass, so n = 1 and molecular formula = C3H4O4.
(d) Basicity: 7.33 cm3 of 0.01 M NaOH neutralize 3.812 mg of acid, i.e. 7.33 cm3 of 1 M NaOH neutralize (3.812/0.01) mg = 0.3812 g; 1000 cm3 of 1 M NaOH neutralize (0.3812/7.33) × 1000 = 52 g. Mass of acid neutralized by one mole of NaOH = 52 g. If n is the basicity, molar mass = n × 52 = 104, so basicity n = 2.
(e) Structure: the acidity of an organic acid is due to the carboxylic group (-COOH). Basicity 2 means two -COOH groups. Out of C3H4O4, 2 × COOH = C2H2O4; the rest = C3H4O4 - C2H2O4 = CH2. The structure is CH2(COOH)2, i.e. malonic acid.

Teacher's Note: Titration gives basicity 2, fixing two -COOH groups; the remainder is CH2.

Exam Note: Link basicity to number of -COOH groups to earn the structure mark.

Question Example 16.18. (N.C.E.R.T.) A liquid aromatic compound A containing carbon = 92.3% and hydrogen = 7.7% decolourized KMnO4 and on ozonolysis gave methanal and another compound B. The molecular mass of A is 104. On treatment with a suitable catalyst, A gave a high molecular mass solid product C having the same empirical formula as that of compound A. Compound C is used in making toys and household goods. Identify A, B and C and explain the reactions.

Solution. (a) Empirical formula:
ElementPercentageAtomic massRelative no. of atomsSimplest atomic ratioSimplest whole no.
Carbon92.3127.697.69/7.69 = 11
Hydrogen7.717.77.70/7.69 = 11
Empirical formula is CH.
(b) Empirical formula mass (CH) = 13; n = 104/13 = 8. Molecular formula = (CH)8 = C8H8.
(c) Structures of A and B. (i) Compound A (C8H8) is aromatic and decolourizes KMnO4, so it must contain a benzene ring and a side chain containing a site of unsaturation. The only compound satisfying these requirements is styrene, C6H5CH=CH2. (ii) This is supported by ozonolysis, which gives methanal and benzaldehyde B: C6H5CH=CH2 (styrene, A) on (i) O3/CH2Cl2, (ii) Zn/H2O gives CH2=O (methanal) + C6H5CH=O (benzaldehyde, B).
(d) Compound C: styrene on treatment with a catalyst gives a high molecular mass solid with the same empirical formula, so C is a polymer, i.e. polystyrene: n CH2=CH(C6H5) → [-CH2-CH(C6H5)-]n (polymerization). Polystyrene is used for making toys and household goods.
Thus, A = styrene, B = benzaldehyde and C = polystyrene.

Teacher's Note: Empirical formula CH with M = 104 gives C8H8; ozonolysis to methanal reveals a terminal =CH2.

Exam Note: Write ozonolysis equation and polymerization of styrene.

Question Problem for Practice 1(i) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 41.35, H = 6.89, N = 24.12?

Solution. Empirical formula = C2H4NO. Printed answer agrees. O = 100 - (41.35 + 6.89 + 24.12) = 27.64; ratio C : H : N : O = 3.446 : 6.89 : 1.723 : 1.727 = 2 : 4 : 1 : 1.

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 1(ii) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 60, H = 13.3?

Solution. Empirical formula = C3H8O. Printed answer agrees. O = 26.7; ratio C : H : O = 5 : 13.3 : 1.67 = 3 : 8 : 1.

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 1(iii) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 65.73, H = 15.06, N = 19.21?

Solution. Empirical formula = C4H11N. Corrected: the book prints C4H7N, which does not fit the data. Ratio C : H : N = 5.478 : 15.06 : 1.372 = 4 : 11 : 1, giving C4H11N (H = 11/73 = 15.07% as given).

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 1(iv) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 50.4, H = 9.25?

Solution. Empirical formula = C5H11O3. Printed answer agrees. O = 40.35; ratio C : H : O = 4.2 : 9.25 : 2.52 = 5 : 11 : 3.

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 1(v) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 10.0, H = 0.84, Cl = 89.2?

Solution. Empirical formula = CHCl3. Printed answer agrees. Ratio C : H : Cl = 0.833 : 0.84 : 2.51 = 1 : 1 : 3.

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 1(vi) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 71.4, H = 3.78, N = 7.57, S = 17.3?

Solution. Empirical formula = C11H7NS. Corrected: the book prints C11H5NS, which does not fit the data. Ratio C : H : N : S = 5.95 : 3.78 : 0.54 : 0.54 = 11 : 7 : 1 : 1, giving C11H7NS (C = 132/185 = 71.35%, H = 7/185 = 3.78%).

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 1(vii) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 28.2, H = 1.57, S = 12.5, Cl = 13.9, Br = 31.2?

Solution. Empirical formula = C6H4SClBrO2. Printed answer agrees. O = 100 - 87.37 = 12.63; ratio C : H : S : Cl : Br : O = 2.35 : 1.57 : 0.39 : 0.39 : 0.39 : 0.79 = 6 : 4 : 1 : 1 : 1 : 2.

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 1(viii) (after Example 16.18). What is the empirical formula of the compound whose analysis percentages are: C = 39.2, H = 9.79, P = 33.7?

Solution. Empirical formula = C3H9PO. Printed answer agrees. O = 17.31; ratio C : H : P : O = 3.267 : 9.79 : 1.088 : 1.082 = 3 : 9 : 1 : 1.

Teacher's Note: Divide each percentage by atomic mass, then by the smallest value.

Exam Note: Show the ratio working; find O by difference if not given.

Question Problem for Practice 2 (after Example 16.18). An organic compound contains carbon 34.6%, and hydrogen 3.84% the rest being oxygen. Its vapour density is 52. Calculate the molecular formula of the compound.

Solution. Printed answer: C3H4O4. (Check: O = 61.56%; C : H : O = 2.88 : 3.84 : 3.85 = 3 : 4 : 4 (mass 104); M = 2 × 52 = 104, so n = 1.)

Teacher's Note: Molecular mass = 2 × vapour density.

Exam Note: Do empirical formula first, then n = M/empirical mass.

Question Problem for Practice 3 (after Example 16.18). An organic compound contains 61.0% C and 11.88% H. The molecular mass of the compound is 118. Calculate the molecular formula of the compound.

Solution. Printed answer: C6H14O2. (Check: O = 27.12%; empirical C3H7O, mass 59; n = 118/59 = 2.)

Teacher's Note: Same data as Example 16.11; oxygen is found by difference.

Exam Note: Show n = 2 explicitly.

Question Problem for Practice 4 (after Example 16.18). An organic compound on analysis gave the following results: C : 27.27%, H = 4.55%, O = 36.36%, N = 32.32%. The vapour density of the compound was found to be 44. Find the molecular formula of the compound.

Solution. Printed answer: C2H4N2O2. (Check: ratio C : H : O : N = 2.27 : 4.55 : 2.27 : 2.31 = 1 : 2 : 1 : 1, empirical mass 44; M = 2 × 44 = 88, so n = 2.)

Teacher's Note: Vapour density 44 means molecular mass 88, twice the empirical mass.

Exam Note: Do not stop at the empirical formula CH2NO.

Question Problem for Practice 5 (after Example 16.18). An organic compound contains carbon, hydrogen and oxygen. 1.80 g of the substance on combustion gave 2.64 g of CO2 and 1.08 g of H2O. Calculate the empirical formula of the compound.

Solution. Printed answer: CH2O. (Check: C = (12/44) × 2.64 = 0.72 g; H = (2/18) × 1.08 = 0.12 g; O = 1.80 - 0.84 = 0.96 g; moles 0.06 : 0.12 : 0.06 = 1 : 2 : 1.)

Teacher's Note: Find masses of C and H from CO2 and H2O; oxygen is the remainder of 1.80 g.

Exam Note: Show mass of O by difference.

Question Problem for Practice 6 (after Example 16.18). An organic compound (molecular mass 78) has 92.3% carbon and 7.7% hydrogen by weight. Calculate the empirical formula for the compound.

Solution. Corrected: the printed answer C6H6 is the molecular formula; the empirical formula asked for is CH (molecular formula C6H6). (Check: C : H = 7.69 : 7.7 = 1 : 1, empirical CH (13); n = 78/13 = 6, so the compound is C6H6; the empirical formula itself is CH.)

Teacher's Note: The printed answer is the molecular formula (benzene); the empirical formula is CH.

Exam Note: State both CH and C6H6 to be safe.

Question Problem for Practice 7 (after Example 16.18). A compound contains 40% carbon, 6.67% hydrogen (vapour density = 30). Calculate the empirical and molecular formula. Suggest a possible structure.

Solution. Printed answer: C2H4O2, CH3COOH. (Check: O = 53.33%; C : H : O = 3.33 : 6.67 : 3.33 = 1 : 2 : 1, empirical formula CH2O (30); M = 60, n = 2; molecular formula C2H4O2; possible structure CH3COOH.)

Teacher's Note: Empirical CH2O with M = 60 gives C2H4O2; acetic acid is one possible structure.

Exam Note: Give empirical formula CH2O, molecular formula and one structure.

Question Problem for Practice 8 (after Example 16.18). 0.45 g of an organic compound containing only carbon, hydrogen and nitrogen on combustion, gave 1.1 g of carbon dioxide and 0.3 g of water. What is the empirical formula of the compound?

Solution. Printed answer: C3H4N. (Check: C = (12/44) × 1.1 = 0.30 g; H = (2/18) × 0.3 = 0.0333 g; N = 0.45 - 0.3333 = 0.1167 g; moles 0.025 : 0.0333 : 0.00833 = 3 : 4 : 1.)

Teacher's Note: Nitrogen is the remainder of the sample mass after C and H.

Exam Note: Show masses of C, H, N then mole ratio.

Question Problem for Practice 9 (after Example 16.18). 1.01 g of an organic compound containing 41.37% carbon and 5.75% hydrogen, required 11.6 cm3 of 1N HCl. In Carius determination, 0.2006 g of the substance gave 0.5544 g of barium sulphate. 0.1015 g of the liquid when vaporized displaced 27.96 cm3 of dry air measured at 288 K and 750 mm pressure. Find out the molecular formula of the compound.

Solution. Printed answer: C3H5NS. (Check: N = 11.6 × 14/1000/1.01 = 16.1%; S = (32/233) × (0.5544/0.2006) × 100 = 38.0%; C : H : N : S = 3.45 : 5.75 : 1.15 : 1.19 = 3 : 5 : 1 : 1, empirical mass 87; V at STP = 750 × 27.96 × 273/(288 × 760) = 26.15 cm3, M = 0.1015 × 22400/26.15 = 86.9, so n = 1.)

Teacher's Note: Combines Kjeldahl (N), Carius (S) and Victor Meyer (M) in one problem.

Exam Note: Allocate marks per estimation; finish with n = M/empirical mass.

Question Problem for Practice 10 (after Example 16.18). A compound (molecular mass 147) contains 49.0% carbon and 2.72% hydrogen. 2.561 mg of the compound gave 5.0 mg of silver chloride in Carius estimation. Find out the molecular formula of the compound.

Solution. Printed answer: C6H4Cl2. (Check: % Cl = (35.5/143.5) × (5.0/2.561) × 100 = 48.3; C : H : Cl = 4.08 : 2.72 : 1.36 = 3 : 2 : 1, empirical formula C3H2Cl (73.5); n = 147/73.5 = 2.)

Teacher's Note: Carius gives % Cl from AgCl; empirical mass 73.5 doubles to 147.

Exam Note: Convert mg of AgCl to % Cl carefully.

Question Problem for Practice 11 (after Example 16.18). 0.1 g of an organic monobasic acid gave 0.2545 g of CO2 and 0.04428 g of H2O, on combustion. 0.122 g of the acid required for complete neutralization 10 cm3 of a N/10 alkali. Determine the molecular formula of the acid.

Solution. Printed answer: C7H6O2. (Check: C = 69.4%, H = 4.92%, O = 25.7%; ratio 7 : 6 : 2; 0.122 g needs 1 mmol alkali, monobasic, so M = 122 = empirical mass.)

Teacher's Note: Monobasic acid: equivalent mass equals molar mass; 0.122 g per milliequivalent gives 122.

Exam Note: Use titration to get M, combustion to get formula.

Question Problem for Practice 12 (after Example 16.18). An acid of molecular mass 104 contains 34.6% carbon, 3.85% hydrogen and rest being oxygen. Calculate the molecular formula of the acid.

Solution. Printed answer: C3H4O4. (Check: O = 61.55%; C : H : O = 2.88 : 3.85 : 3.85 = 3 : 4 : 4, mass 104 = M, so n = 1.)

Teacher's Note: Same data as Example 16.17; empirical mass equals molecular mass.

Exam Note: State n = 1 explicitly.

Question Problem for Practice 13 (after Example 16.18). An organic monobasic acid has 68.9% carbon and 4.8% hydrogen. 0.122 g of acid requires 10 ml of N/10 caustic soda solution for neutralization. What is the molecular formula of the acid?

Solution. Printed answer: C7H6O2. (Check: O = 26.3%; C : H : O = 5.74 : 4.8 : 1.64 = 7 : 6 : 2 (mass 122); M = 0.122/0.001 = 122, so n = 1.)

Teacher's Note: Titration gives M = 122 for a monobasic acid; formula follows from percentages.

Exam Note: Find oxygen by difference before the ratio table.

Conceptual Questions

Question Conceptual Question 1. When do we use fluted filter paper or hot water funnel for filtration?

Solution. To avoid crystallization during filtration, fluted filter paper is used when the volume of the solution to be filtered is small and hot water funnel when the volume is large.

Teacher's Note: Both devices prevent the solute crystallizing in the funnel; choice depends on volume.

Exam Note: Mention volume of solution for each device.

Question Conceptual Question 2. How will you purify essential oils?

Solution. Essential oils are volatile and are insoluble in water. Therefore, they are purified by steam distillation.

Teacher's Note: Steam distillation suits volatile, water-immiscible, heat-sensitive liquids.

Exam Note: Name steam distillation and give the reason.

Question Conceptual Question 3. How will you purify a liquid having non-volatile impurities?

Solution. Simple distillation will give us the pure liquid while the non-volatile impurities will remain in the flask as residue.

Teacher's Note: Non-volatile impurities stay behind in the distillation flask.

Exam Note: One line: simple distillation, residue stays.

Question Conceptual Question 4. Suggest a method to purify: (i) Camphor containing traces of common salt. (ii) Kerosene containing water. (iii) A liquid which decomposes at its boiling point.

Solution. (i) Sublimation. Camphor sublimes while common salt remains as residue in the china dish.
(ii) Solvent extraction using a separatory funnel. The lower water layer is run off when kerosene is obtained. It is dried over anhydrous CaCl2 and then distilled to give pure kerosene.
(iii) Distillation under reduced pressure.

Teacher's Note: Match method to property: sublimation, immiscibility, lowered boiling point under reduced pressure.

Exam Note: Give one method with a reason for each part.

Question Conceptual Question 5. A reaction is carried out using aniline as a reactant as well as a solvent. How will you remove unreacted aniline?

Solution. Steam of distillation.

Teacher's Note: Aniline is steam volatile and immiscible with water.

Exam Note: Answer: steam distillation.

Question Conceptual Question 6. A mixture contains two components A and B. The solubilities of A and B in water near its boiling point are 10 grams per 100 ml and 2 g per 100 ml respectively. How will you separate A and B from this mixture? (N.C.E.R.T.)

Solution. Fractional crystallization. When the saturated hot solution of this mixture is allowed to cool, the less soluble component B crystallizes out first leaving the more soluble component A in the mother liquor.

Teacher's Note: Different solubilities allow the less soluble component to crystallize first.

Exam Note: Name the method and which component crystallizes first.

Question Conceptual Question 7. A mixture contains benzoic acid and nitrobenzene. How can this mixture be separated into its constituents by the technique of extraction using an appropriate chemical reagent? (N.C.E.R.T.)

Solution. The mixture is shaken with a dilute solution of NaHCO3 and extracted with ether or chloroform when nitrobenzene goes into the organic layer. Distillation of the solvent gives nitrobenzene. The filtrate is acidified with dil. HCl when benzoic acid gets precipitated. The solution is cooled and benzoic acid is obtained by filtration.

Teacher's Note: Acid converts to water-soluble sodium salt; neutral nitrobenzene stays in the organic layer.

Exam Note: Mention NaHCO3 extraction, then acidification with HCl.

Question Conceptual Question 8. Explain why an organic liquid vaporizes at a temperature below its boiling point in steam distillation. (N.C.E.R.T.)

Solution. A liquid boils when its vapour pressure becomes equal to the atmospheric pressure. During steam distillation, the mixture boils when sum of the vapour pressure of water and organic liquid becomes equal to the atmospheric pressure. Since the vapour pressure of water is appreciably higher than that of organic liquid, therefore, the organic liquid will vaporize at a temperature much lower than its normal boiling point.

Teacher's Note: Boiling occurs when the total vapour pressure reaches atmospheric pressure.

Exam Note: Key idea: p(water) + p(liquid) = atmospheric pressure.

Question Conceptual Question 9. How will you separate a mixture of o-nitrophenol and p-nitrophenol?

Solution. Steam distillation. o-Nitrophenol being volatile distils over along with water while p-nitrophenol being non-volatile remains in the flask.

Teacher's Note: o-Nitrophenol is intramolecularly H-bonded, hence steam volatile.

Exam Note: Name steam distillation and which isomer distils.

Question Conceptual Question 10. Suggest methods for the separation of the following mixtures. (i) A mixture of liquid A (b.p. 365 K) and liquid B (b.p. 356 K). (ii) A mixture of liquid C (b.p. 353 K) and liquid D (b.p. 413 K).

Solution. (i) Fractional distillation because the boiling points of the two liquids differ by just 9°.
(ii) Simple distillation since the boiling points of the two liquids are widely apart.

Teacher's Note: Boiling point gap decides: small gap needs a fractionating column.

Exam Note: Justify each method by the boiling point difference.

Question Conceptual Question 11. A liquid (1.0 g) has three components. Which technique will you employ to separate them?

Solution. Column chromatography.

Teacher's Note: Small quantity of a multi-component mixture suits chromatography.

Exam Note: Answer: column chromatography.

Question Conceptual Question 12. The Rf value of A and B in a mixture determined by TLC in a solvent mixture are 0.65 and 0.42 respectively. If the mixture is separated by column chromatography using the same solvent mixture as a mobile phase, which of the two components, A or B, will elute first? Explain. (N.C.E.R.T.)

Solution. Since the Rf value of A is 0.65, therefore, it is less strongly adsorbed as compared to compound B with Rf value of 0.42. Therefore, on extraction on the column, A will elute first.

Teacher's Note: Higher Rf means weaker adsorption on the stationary phase, so earlier elution.

Exam Note: Link larger Rf to weaker adsorption.

Question Conceptual Question 13. Name two compounds which do not contain halogen but give positive Beilstein test.

Solution. Urea and thiourea give positive Beilstein test due to the formation of volatile cupric cyanide.

Teacher's Note: Beilstein test also responds to nitrogen compounds forming volatile Cu(CN)2.

Exam Note: Name urea and thiourea and the reason.

Question Conceptual Question 14. Why is an organic compound fused with sodium for testing halogens, nitrogen, sulphur and phosphorus? (N.C.E.R.T.)

Solution. The organic compound is fused with sodium metal to convert these elements which are present in the covalent form to ionic form.

Teacher's Note: Fusion converts covalently bonded elements into ionic salts that dissolve in water.

Exam Note: Say: covalent to ionic form.

Question Conceptual Question 15. Why is nitric acid added to sodium extract before adding silver nitrate solution for testing halogens? (N.C.E.R.T.)

Solution. Sodium extract is boiled with nitric acid to decompose NaCN and Na2S, if present, otherwise these will react with AgNO3 and hence will interfere with the test as shown below:
NaCN + HNO3 → NaNO3 + HCN↑
Na2S + 2 HNO3 → 2 NaNO3 + H2S↑
NaCN + AgNO3 → AgCN (white ppt.) + NaNO3
Na2S + 2 AgNO3 → Ag2S (black ppt.) + 2 NaNO3

Teacher's Note: Removes CN- and S2- that would give false precipitates with Ag+.

Exam Note: Write the decomposition and interfering precipitates.

Question Conceptual Question 16. Why is it necessary to use acetic acid and not sulphuric acid for acidification of sodium extract for testing sulphur by lead acetate test? (N.C.E.R.T.)

Solution. For testing sulphur, the sodium extract is acidified with acetic acid because lead acetate is soluble with acetic acid and does not interfere with the test. If H2SO4 were used, lead acetate itself will react with H2SO4 to form white ppt. of lead sulphate which will interfere with the test.
Pb(OCOCH3)2 + H2SO4 → PbSO4↓ + 2 CH3COOH (white ppt.)

Teacher's Note: Sulphate would precipitate Pb2+ as PbSO4, masking the black PbS test.

Exam Note: Mention PbSO4 white precipitate as interference.

Question Conceptual Question 17. What precipitate will be formed when AgNO3 solution is added to chloroform or chlorobenzene?

Solution. The ppt. of AgCl will not be formed since both these are covalent compounds and hence do not ionize to give Cl- ions which is the essential requirement for the AgNO3 test.

Teacher's Note: AgCl forms only from free Cl-; covalently bound chlorine does not respond directly.

Exam Note: Answer: no precipitate, since no ionic Cl-.

Question Conceptual Question 18. Will CCl4 give white precipitate of AgCl on heating it with silver nitrate? Give reason for your answer. (N.C.E.R.T.)

Solution. CCl4 is a covalent compound. It does not ionize in aqueous solution to form Cl- ion. Therefore, it does not produce white ppt. of AgCl when AgNO3 solution is added to it.

Teacher's Note: Covalent C-Cl bonds do not furnish Cl- without sodium fusion.

Exam Note: Say no, with the covalent-bond reason.

Very Short Answer Questions (Carrying 1 mark)

Question Very Short Answer Question 1. How will you separate a mixture of two organic compounds which have different solubilities in the same solvent?

Solution. By fractional crystallization.

Teacher's Note: Solubility difference is the basis of fractional crystallization.

Exam Note: One-line answer suffices.

Question Very Short Answer Question 2. What type of compounds are purified by sublimation?

Solution. Substances whose vapour pressures become equal to the atmospheric pressure much below their melting points.

Teacher's Note: Such solids pass directly from solid to vapour on heating.

Exam Note: State vapour pressure condition.

Question Very Short Answer Question 3. How will you separate iodine from sodium chloride?

Solution. Either by sublimation or by extraction with CCl4 followed by evaporation.

Teacher's Note: Iodine sublimes and dissolves in CCl4; NaCl does neither.

Exam Note: Name either method with the reason.

Question Very Short Answer Question 4. Will you get any precipitate if you add silver nitrate solution to chloromethane? If not, why?

Solution. No, because chloromethane is a covalent compound and hence does not contain Cl- ions.

Teacher's Note: Haloalkanes do not ionize, so no free Cl- for AgNO3.

Exam Note: Answer no; cite covalent nature.

Question Very Short Answer Question 5. Explain why sodium extract (Lassaigne's extract) is boiled with dilute HNO3 before testing for halogens?

Solution. To decompose NaCN or Na2S present in the Lassaigne's extract otherwise these will produce white ppt. with AgNO3 and would thus interfere with the test of halogens.

Teacher's Note: Boiling with HNO3 expels HCN and H2S that would give false precipitates.

Exam Note: Name NaCN and Na2S as interfering ions.

Question Very Short Answer Question 6. An organic liquid decomposes below its boiling point. How will you purify it?

Solution. Vacuum distillation under reduced pressure i.e. vacuum distillation.

Teacher's Note: Lower pressure lowers the boiling point, avoiding decomposition.

Exam Note: Name distillation under reduced pressure.

Question Very Short Answer Question 7. Two volatile compounds A and B differ in their boiling points by 15K. Suggest a suitable method for their separation.

Solution. By fractional distillation.

Teacher's Note: Small boiling point gap needs a fractionating column.

Exam Note: State fractional distillation.

Question Very Short Answer Question 8. How will you separate a mixture of o- and p- nitrophenols?

Solution. o-Nitrophenol is steam volatile while p-nitrophenol is not and hence these can be separated by steam distillation.

Teacher's Note: Intramolecular H-bonding makes the ortho isomer steam volatile.

Exam Note: Name steam distillation; ortho distils.

Question Very Short Answer Question 9. Name two methods which can be safely used to purify aniline.

Solution. Vacuum distillation and steam distillation.

Teacher's Note: Aniline decomposes near its boiling point, so milder methods are used.

Exam Note: Give both methods.

Question Very Short Answer Question 10. Can we estimate oxygen in an organic compound?

Solution. Yes. But usually it is indirectly estimated by subtracting the percentage of all the elements present in an organic compound from 100.

Teacher's Note: Oxygen is usually found by difference, not directly.

Exam Note: Mention subtraction from 100.

Question Very Short Answer Question 11. Define molecular formula? How is it related to empirical formula?

Solution. Printed answer: "Refer to the text." From the text (16.6): the molecular formula of a substance is that formula which gives the actual number of atoms of the various elements present in one molecule of the substance. It may be the same as the empirical formula or an integral multiple of it: Molecular formula = n × (Empirical formula), where n = molecular mass/empirical formula mass.

Teacher's Note: Molecular formula is a whole-number multiple n of the empirical formula.

Exam Note: Give n = M / empirical formula mass with example.

Question Very Short Answer Question 12. What type of organic compounds cannot be Kjeldahlised?

Solution. Compounds containing nitrogen atom in the ring and those compounds in which nitrogen is directly linked either to oxygen or to another nitrogen atom such as in nitro (-NO2) and azo (-N=N-) compounds.

Teacher's Note: Kjeldahl digestion cannot convert such nitrogen fully into ammonium sulphate.

Exam Note: Name nitro, azo and ring-nitrogen compounds.

Question Very Short Answer Question 13. Name the method used for determination of molecular mass of volatile liquids.

Solution. Victor-Meyer's method.

Teacher's Note: Victor Meyer measures volume of air displaced by a known mass of vapour.

Exam Note: One-line answer.

Question Very Short Answer Question 14. Define the term 'elution' as applied to column chromatography.

Solution. It is the process of extraction of different compounds adsorbed on the column by means of a suitable solvent called eluent.

Teacher's Note: Eluent is the solvent that washes components off the adsorbent.

Exam Note: Define elution and name the eluent.

Question Very Short Answer Question 15. What conclusion would you draw if during Lassaigne's test a blood red colouration is obtained?

Solution. The formation of blood red colouration during Lassaigne's test indicates the presence of both N and S.

Teacher's Note: Blood red Fe(CNS)2+ forms only when both N and S are present.

Exam Note: State presence of both N and S.

Question Very Short Answer Question 16. Write the molecular formula of iron (III) hexacyanoferrate (II). (N.C.E.R.T.)

Solution. Fe4[Fe(CN)6]3.

Teacher's Note: Four Fe3+ balance three [Fe(CN)6]4- ions; this is Prussian blue.

Exam Note: Balance charges: 4 × 3 = 3 × 4.

Question Very Short Answer Question 17. Why is a solution of KOH used to absorb CO2 evolved during the estimation of carbon present in an organic compound? (N.C.E.R.T.)

Solution. CO2 is slightly acidic in nature and hence dissolves in KOH forming K2CO3: 2 KOH + CO2 → K2CO3 + H2O

Teacher's Note: Acidic CO2 reacts with strong base, giving a weighable mass increase.

Exam Note: Write the equation with K2CO3.

Question Very Short Answer Question 18. A mixture contains 71 per cent calcium sulphate and 29 per cent camphor. Name a suitable technique of separation of the components of this mixture. (N.C.E.R.T.)

Solution. Sublimation.

Teacher's Note: Camphor sublimes; calcium sulphate does not.

Exam Note: Answer: sublimation.

Question Very Short Answer Question 19. Suggest a suitable technique of separating naphthalene from kerosene oil present in a mixture. (N.C.E.R.T.)

Solution. Simple distillation.

Teacher's Note: Kerosene distils off, leaving naphthalene as residue.

Exam Note: Answer: simple distillation.

Competition Focus - Additional Useful Information: Eudiometry (Problems for Practice)

Question Eudiometry Problem for Practice 1. 10 ml of a gaseous hydrocarbon were mixed with 100 ml of oxygen and exploded in a eudiometer tube. The volume of the residual gases was 95 ml of which 20 ml was absorbed by caustic soda and the remainder by pyrogallol. Find the molecular formula of the gas.

Solution. Printed answer: C2H2. (Check: CO2 formed = 20 ml for 10 ml hydrocarbon, so x = 2; O2 left = 95 - 20 = 75 ml, so O2 used = 25 ml = 10(x + y/4), giving x + y/4 = 2.5 and y = 2. Contraction 10 + 100 - 95 = 15 ml = 10(1 + y/4) agrees.)

Teacher's Note: NaOH absorbs CO2, pyrogallol absorbs leftover O2; use CxHy + (x + y/4)O2 equation.

Exam Note: Use volumes: CO2 gives x, O2 used gives y.

Question Eudiometry Problem for Practice 2. 9.0 ml of a mixture of methane and ethylene was exploded with 30 ml (excess) of oxygen. After cooling, the volume was 21.0 ml. Further treatment with caustic potash reduced the volume to 7.0 ml. Find out the amounts of methane and ethylene in the mixture.

Solution. Printed answer: CH4 = 4 ml, C2H4 = 5 ml. (Check: CO2 = 21 - 7 = 14 ml; O2 left = 7 ml, so O2 used = 23 ml. Let CH4 = a, C2H4 = b: a + b = 9; a + 2b = 14, so b = 5, a = 4. O2 used = 2a + 3b = 8 + 15 = 23 ml, which agrees.)

Teacher's Note: Two equations from total volume and CO2 volume; oxygen consumed provides a check.

Exam Note: Verify with oxygen used (23 ml).

C.B.S.E.-P.M.T. (Mains) Special - A. Subjective Questions

Question PMT Subjective Question 1. Without using column chromatography, how will you separate a mixture of camphor and benzoic acid?

Solution. Sublimation cannot be used since both camphor and benzoic acid sublime on heating. Therefore, a chemical method using NaHCO3 solution is used when benzoic acid dissolves leaving camphor behind. The filtrate is cooled and then acidified with dil. HCl to get benzoic acid.

Teacher's Note: Acid-base extraction: benzoic acid forms water-soluble sodium benzoate, camphor does not.

Exam Note: Name NaHCO3 then HCl regeneration.

Question PMT Subjective Question 2. Will sodium cyanide give a positive Lassaigne's test for nitrogen?

Solution. Yes. During fusion with Na metal, the N of the organic compound is actually converted into NaCN which is the primary requirement for Lassaigne's test for nitrogen.

Teacher's Note: Lassaigne extract already contains NaCN, so NaCN itself responds.

Exam Note: Answer yes; cite NaCN formation.

Question PMT Subjective Question 3. How will you test the presence of nitrogen in hydrazine?

Solution. If hydrazine (NH2NH2) is fused with Na metal, it does not form NaCN since it does not contain carbon and hence will not give +ve test for nitrogen. In order to test the presence of N in such compounds, during fusion with Na, some charcoal or preferably starch (which contains C but not N, S, halogens etc.) is added. Under these conditions, C of starch or charcoal combines with N of the compound to form NaCN which will now give a +ve test for nitrogen.

Teacher's Note: Hydrazine lacks carbon, so supply carbon during sodium fusion.

Exam Note: Add starch or charcoal during fusion.

Question PMT Subjective Question 4. Lassaigne's test is not shown by diazonium salts. Why?

Solution. Diazonium salts usually lose N2 on heating much before they have a chance to react with fused sodium metal. Therefore, diazonium salts do not show positive Lassaigne's test for nitrogen.

Teacher's Note: N2 escapes on heating before NaCN can form.

Exam Note: Say nitrogen is lost as N2.

Question PMT Subjective Question 5. Sometimes a red colour is not produced in the Lassaigne's test even if both nitrogen and sulphur are present in the organic compound. Explain.

Solution. In principle, if the organic compound contains both N and S, sodium thiocyanate should be formed in Lassaigne's test and this should give blood red colouration with FeCl3: Na + C + N + S → NaCNS (fusion); 3 NaCNS + FeCl3 → Fe(SCN)3 + 3 NaCl (ferric thiocyanate, blood red colouration). However, if blood red colouration is not obtained, it does not necessarily mean that S is absent. This is because in presence of excess of sodium metal, sodium thiocyanate initially formed, decomposes to form sodium cyanide and sodium sulphide: 2 Na + 2 NaCNS (heat) → NaCN + Na2S. As a result, blood red colouration is not obtained.

Teacher's Note: Excess sodium breaks NaCNS into NaCN and Na2S, so no thiocyanate remains.

Exam Note: Give the NaCNS decomposition equation.

Question PMT Subjective Question 6. Why is a freshly prepared saturated solution of ferrous sulphate used in the Lassaigne's test for nitrogen?

Solution. On keeping aq. FeSO4 solution, it undergoes hydrolysis to form basic ferric sulphate: 4 FeSO4 + 2 H2O + O2 → 4 Fe(OH)SO4. The pale yellow colour of Fe3+ ions interferes with the light green colour usually obtained in Lassaigne's test.

Teacher's Note: Old FeSO4 oxidizes to Fe3+, spoiling the colour observation.

Exam Note: Mention air oxidation of Fe2+ to Fe3+.

Question PMT Subjective Question 7. What is the difference between vapour density and density? Explain.

Solution. Vapour density is just a ratio between the mass of a certain volume of a gas or vapours of a volatile substance under certain conditions of temperature and pressure (say STP) to the mass of the same volume of H2 under same conditions of temperature and pressure. It, therefore, has no units and is just a number. In contrast, density of a substance (solid, liquid or gas) is the mass of one unit volume of the substance. It has, therefore, units of either g/ml or Kg/L.

Teacher's Note: Vapour density is a unitless ratio relative to hydrogen; density carries units.

Exam Note: Stress: unitless versus g/ml.

B. Problems

Question PMT Problem 1. An aromatic compound contains 69.4% carbon and 5.8% hydrogen. A sample of 0.303 g of this compound was analysed for nitrogen by Kjeldahl's method. The ammonia evolved was absorbed in 50 ml of 0.05 M H2SO4. The excess of the acid required 25 ml of 0.1 M NaOH for neutralization. Determine the molecular formula of the compound if its mass is 121. Draw the possible structures for this compound.

Solution. Step 1. % of N. Let the volume of 0.05 M H2SO4 left unused = v ml. Volume of 0.1 M NaOH required for neutralization of excess acid = 25.0 ml. Applying the molarity equation, naMaVa(H2SO4) = nbMbVb(NaOH), i.e. 2 × 0.05 × v = 1 × 0.1 × 25, so v = 25 ml. Volume of 0.05 M H2SO4 used = 50 - 25 = 25 ml. % N = (1.4 × 25 × 0.05 × 2)/0.303 = 11.55.
Step 2. Molecular formula. % O = 100 - (69.4 + 5.8 + 11.55) = 13.25. C : H : N : O = 69.4/12 : 5.8/1 : 11.55/14 : 13.25/16 = 5.78 : 5.8 : 0.825 : 0.828 = 7 : 7 : 1 : 1. Empirical formula C7H7NO, empirical formula mass = 7 × 12 + 7 × 1 + 14 + 16 = 121 = molecular mass, so molecular formula = C7H7NO.
Step 3. Possible structures. Since the compound is aromatic, it must contain a C6H5 group, i.e. it may be written as C6H5CH2NO or C6H5CH=NOH. Since oximes show geometrical isomerism, the possible structures are syn-benzaldoxime (H and OH on the same side of the C=N bond) and anti-benzaldoxime (C6H5 and OH on the same side of the C=N bond). (Both are geometrical isomers of C6H5CH=N-OH; given in words, figure not redrawn.)

Teacher's Note: Kjeldahl acid consumed = acid taken minus excess; oxime C=N gives geometrical isomers.

Exam Note: Show nitrogen calculation, formula and syn/anti oximes.

Question PMT Problem 2. Two compounds A and B give on analysis, C = 88.82% and H = 11.18%. Both decolourize Br2 in CCl4 solution. Compound A gives a precipitate with ammoniacal silver nitrate and on reductive ozonolysis gives 2-ketobutanal. Compound B does not give a precipitate with ammoniacal silver nitrate but on reductive ozonolysis gives formaldehyde and glyoxal. Deduce the structure of the compounds.

Solution. (i) C : H = 88.82/12 : 11.18/1 = 7.41 : 11.18 = 2 : 3. Empirical formula of A and B = C2H3 and the lowest molecular formula of the compounds = 2 × C2H3 = C4H6.
(ii) The molecular formula C4H6 suggests that A and B may contain a triple bond or two double bonds. This is supported by the observation that both A and B decolourize Br2 in CCl4.
(iii) Since compound A gives a white ppt. with ammoniacal AgNO3 solution, it must be a terminal alkyne, i.e. CH3CH2C≡CH: CH3CH2C≡CH + [Ag(NH3)2]+NO3- → CH3CH2C≡CAg + HNO3 + NH3 (silver 1-butynide, white ppt.). A = 1-butyne.
(iv) The structure of A is further supported by its ozonolysis product: CH3CH2C≡CH on (i) O3/CH2Cl2, (ii) Zn/H2O gives CH3CH2COCHO (2-ketobutanal).
(v) Since compound B does not produce a white ppt. with ammoniacal silver nitrate, it may have any one of the following three structures: CH3-C≡C-CH3 (2-butyne), CH3-CH=C=CH2 (1,2-butadiene; the book's drawing of this structure is garbled), CH2=CH-CH=CH2 (1,3-butadiene).
(vi) Since the ozonolysis products of B are formaldehyde and glyoxal, therefore, compound B is 1,3-butadiene: CH2=CH-CH=CH2 on (i) O3/CH2Cl2, (ii) Zn/H2O gives CH2=O + O=CH-CH=O + O=CH2 (formaldehyde and glyoxal).
Thus A = 1-butyne and B = 1,3-butadiene.

Teacher's Note: C : H of 2 : 3 gives C4H6; terminal alkyne test and ozonolysis products pick the isomers.

Exam Note: Marks for formula, test reasoning and ozonolysis of each.

I.I.T. (Mains) Special

Question IIT Q.1. (Roorkee, 1991) A chloro compound (A) showed the following properties: (i) Decolourized bromine in CCl4 (ii) Absorbed hydrogen catalytically (iii) Gave a white precipitate with ammoniacal cuprous chloride (iv) When vaporized, 1.49 g of (A) gave 448 ml of vapours at STP. Identify (A) and write down the equation for reaction of step (iii).

Solution. Step 1. Molecular mass. 448 ml of vapours at STP weigh 1.49 g, so 22400 ml weigh (1.49 × 22400)/448 = 74.5 g. Molecular mass of (A) = 74.5 g mol-1.
Step 2. Functional groups. (i) Since (A) decolourizes Br2/CCl4, (A) must be an unsaturated compound; this is supported by the fact that (A) also absorbs hydrogen catalytically. (ii) Since (A) gave a precipitate with ammoniacal CuCl, it must be a terminal acetylene, i.e. it must contain the grouping -C≡CH.
Step 3. Molecular formula. Molecular mass of -C≡CH group = 12 + 12 + 1 = 25 a.m.u.; atomic mass of chlorine = 35.5. Remaining portion = 74.5 - 25 - 35.5 = 14, which is a CH2 group. Hence (A) contains a chlorine atom, one CH2 group and one terminal acetylenic group: ClCH2C≡CH (3-chloroprop-1-yne).
Step 4. Equation for step (iii). ClCH2C≡CH + CuCl + NH4OH → ClCH2C≡CCu + NH4Cl + H2O (copper 3-chloroprop-1-ynide, red ppt.).

Teacher's Note: Subtract Cl and -C≡CH from the molar mass 74.5; the remainder 14 is CH2.

Exam Note: Give structure and the copper acetylide equation.

Question IIT Q.2. (Roorkee 1991) A hydrocarbon (A) [C, 90.56%, vapour density 53] was subjected to vigorous oxidation to give a dibasic acid (B). 0.10 g of (B) required 24.1 ml of 0.05 N NaOH for complete neutralization. Nitration of (B) gave a single mono nitro derivative. When (B) was heated strongly with sodalime it gave benzene. Identify (A) and (B) with proper reasoning and also give their structures.

Solution. Step 1. Molecular formula of A. C : H = 90.56/12 : 9.44/1.0 = 7.55 : 9.44 = 4 : 5. Empirical formula C4H5 (mass 53). Vapour density = 53, so molecular mass = 106, n = 106/53 = 2 and molecular formula of A = C8H10.
Step 2. Molecular mass of B. 24.1 ml of 0.05 N NaOH neutralize 0.1 g of acid, so 1000 ml of 1 N NaOH neutralize 0.1 × 1000/(24.1 × 0.05) = 83 g (approx.). Equivalent mass of dibasic acid (B) = 83, molecular mass = 83 × 2 = 166 g mol-1.
Step 3. Formula and structure of B. (i) Let the formula of B = R(COOH)2: R + 2 × 45 = 166, so R = 76. Since strong heating with sodalime gives benzene, R must be C6H4, and B = C6H4(COOH)2, a benzenedicarboxylic acid. (ii) Since B on nitration gave a single mono-nitro derivative, B is a symmetrical dibasic acid, i.e. benzene-1,4-dicarboxylic acid (terephthalic acid); its nitration gives 2-nitrobenzene-1,4-dicarboxylic acid. (iii) If B is benzene-1,4-dicarboxylic acid, then hydrocarbon A must be p-xylene (1,4-dimethylbenzene), which on oxidation gives terephthalic acid (B); B on heating with sodalime (decarboxylation) gives benzene.

Teacher's Note: Terephthalic acid is symmetrical, so nitration gives one mono-nitro product; sodalime gives benzene.

Exam Note: Give A, B structures and the oxidation and decarboxylation steps.

Question IIT Q.3. (Roorkee 1994) Two isomeric compounds (A) and (B) have the same molecular formula C11H13OCl. Both are unsaturated and yield the same compound (C) on catalytic hydrogenation and produce 4-chloro-3-ethoxybenzoic acid on vigorous oxidation. (A) exists in geometrical isomers (D) and (E), but not (B). Give structures of (A) to (E) with proper reasoning.

Solution. (i) Since (A) and (B) on catalytic hydrogenation give the same compound (C), (A) and (B) are isomers.
(ii) Since (A) and (B) (M.F. C11H13OCl) on vigorous oxidation give the same monobasic acid, i.e. 4-chloro-3-ethoxybenzoic acid (Corrected: the book's text here says 3-chloro-4-ethoxy, but its drawing and the question show Cl at position 4 and OC2H5 at position 3), C9H9O3Cl, both (A) and (B) have one side chain in place of the COOH group. Since the acid has 9 carbon atoms and the compounds have 11 carbon atoms, this side chain consists of three carbon atoms.
(iii) The possible structures for A and B are (the ring carries Cl at position 4 and OCH2CH3 at position 3 in each):
(I) 1-(4-chloro-3-ethoxyphenyl)prop-1-ene, Ar-CH=CH-CH3;
(II) 3-(4-chloro-3-ethoxyphenyl)prop-1-ene, Ar-CH2-CH=CH2;
(III) 2-(4-chloro-3-ethoxyphenyl)prop-1-ene, Ar-C(CH3)=CH2.
(iv) Since compound (A) shows geometrical isomerism but (B) does not, compound (A) must have structure (I) and compound (B) may have either structure (II) or (III). The two geometrical isomers of (A) are: (D) trans-1-(4-chloro-3-ethoxyphenyl)prop-1-ene (Ar and CH3 on opposite sides of the C=C) and (E) cis-1-(4-chloro-3-ethoxyphenyl)prop-1-ene (Ar and CH3 on the same side).
(v) Since (A) and (B) on catalytic hydrogenation give the same compound (C), both have the same structure of the side chain. In other words, compound (B) has structure (II) and not (III). Hydrogenation of A or B (H2/catalyst) gives (C) = 1-(4-chloro-3-ethoxyphenyl)propane, Ar-CH2CH2CH3.
(Ring structures are given in words; figures not redrawn.) Thus A = (I), B = (II), C = propyl compound, D = trans-(I), E = cis-(I).

Teacher's Note: Same hydrogenation product means same carbon skeleton; geometric isomerism requires a CH=CH-CH3 side chain.

Exam Note: Give A to E structures with the geometrical isomerism reasoning.

Question IIT Q.4. (I.I.T. 1995) A 20.0 cm3 mixture of CO, CH4 and He gases is exploded by an electric discharge at room temperature with excess of oxygen. The volume contraction is found to be 13.0 cm3. A further contraction of 14.0 cm3 occurs when the residual gas is treated with KOH solution. Find out the composition of the gases mixture.

Solution. Let the volume of CO in the mixture = x cm3 and that of CH4 = y cm3. Volume of He in the mixture = 20 - (x + y) cm3. Contraction in volume due to explosion and cooling = 13.0 cm3; contraction due to absorption in KOH = 14.0 cm3 = volume of CO2 produced.
2 CO + O2 → 2 CO2 (x cm3, x/2 cm3, x cm3) ... (i)
CH4 + 2 O2 → CO2 + 2 H2O (y, 2y, y cm3, negligible volume of liquid water) ... (ii)
Contraction in (i) = x + x/2 - x = x/2 cm3. Contraction in (ii) = y + 2y - y = 2y cm3. Total contraction = (x/2 + 2y) = 13 (given) ... (iii). Total CO2 produced = x + y = 14 (given) ... (iv). Solving (iii) and (iv): x = 10.0 cm3 and y = 4.0 cm3.
Thus, volume of CO = 10 cm3, of CH4 = 4 cm3 and of He = 20 - (10 + 4) = 6 cm3.

Teacher's Note: Contraction counts gas lost on combustion; KOH contraction equals CO2 formed; He is inert.

Exam Note: Set two equations from contraction and CO2 volume.

Question IIT Q.5. (Roorkee 1997) A hydrocarbon (A) of molecular weight 54 reacts with an excess of Br2 in CCl4 to give a compound (B) whose molecular weight is 593% more than that of (A). However, on catalytic hydrogenation, with excess of hydrogen, (A) forms (C) whose molecular weight is only 7.4% more than that of (A). (A) reacts with CH3CH2Br in the presence of NaNH2 to give another hydrocarbon (D) which on ozonolysis yields diketone (E). (E) on oxidation gives propionic acid. Give structures of (A) to (E) with reasons.

Solution. Step 1. Molecular weights of B and C. (i) Mol. wt. of (B) = ((100 + 593)/100) × 54 = 374.22. Increase = 374.22 - 54.0 = 320.22; number of Br atoms added = 320.22/80 = 4. So (A) must be an alkyne. (ii) Mol. wt. of (C) = ((100 + 7.4)/100) × 54 = 57.994 ≈ 58. Increase = 4, so 4 H atoms were added, again showing (A) is an alkyne.
Step 2. Structures. (i) The two possible structures for (A) (C4H6) are CH3CH2-C≡CH (but-1-yne) and CH3-C≡C-CH3 (but-2-yne). (ii) Since (A) reacts with CH3CH2Br in presence of NaNH2 to give another hydrocarbon (D), (A) must be a terminal alkyne, i.e. but-1-yne and not but-2-yne. (iii) With but-1-yne: Br2/CCl4 gives CH3CH2-CBr2-CHBr2 (1,1,2,2-tetrabromobutane, B, mol. wt. 374.22, i.e. 593% more than A); H2/catalyst gives CH3CH2CH2CH3 (butane, C, mol. wt. 58, i.e. 7.4% more than A); NaNH2 (-NH3) gives CH3CH2C≡C-Na+ (sod. but-1-ynide), which with CH3CH2Br (-NaBr) gives D.
Step 3. Diketone (E). Since hydrocarbon (D), i.e. hex-3-yne, CH3CH2-C≡C-CH2CH3, on ozonolysis gives a diketone (E) which on further oxidation gives propionic acid, the diketone (E) must be hexane-3,4-dione, CH3CH2-CO-CO-CH2CH3, which on oxidation gives 2 CH3CH2COOH.
Thus, (A) = but-1-yne, (B) = 1,1,2,2-tetrabromobutane, (C) = butane, (D) = hex-3-yne and (E) = hexane-3,4-dione.

Teacher's Note: Mass gain of 320 means four Br; of 4 means four H; terminal alkyne alkylation builds hex-3-yne.

Exam Note: Show mass-increase reasoning and each product structure.

Question IIT Q.6. (Roorkee 2000) The formula weight of an acid is 82.0. In a titration, 100 cm3 of a solution of this acid containing 39.0 g of the acid per litre were completely neutralized by 95.0 cm3 of aqueous NaOH containing 40.0 g of NaOH per litre. What is the basicity of the acid?

Solution. Molarity of the acid (Ma) = 39/82 M. Volume of the acid (Va) = 100 ml (Corrected: the book prints 1000 ml here but substitutes 100 ml). Molarity of NaOH (Mb) = 40/40 = 1.0 M. Acidity of the base (Nb) = 1. Volume of the base (Vb) = 95 ml. Applying the molarity equation, NaMaVa = NbMbVb: Na × (39/82) × 100 = 1 × 1 × 95, so Na = (1 × 95 × 82)/(39 × 100) = 1.99 ≈ 2. Thus, the basicity of the acid = 2.

Teacher's Note: Basicity equals moles of NaOH consumed per mole of acid: 95 mmol / 47.6 mmol is about 2.

Exam Note: Use M × V equality with basicity as multiplier.

Question IIT Q.7. (West Bengal J.E.E. 2001) A gaseous hydrocarbon has the empirical formula CH2. At a given temperature and pressure, it has the density 3.86 g/litre. At this condition, oxygen has the density 2.21 g/litre. Find out the molecular formula of the compound.

Solution. If the density is 2.21 g/litre then mol. wt. of compound (i.e. O2) = 32. If the density is 3.86 g/litre, then the mol. wt. of the gaseous hydrocarbon = 32 × 3.86/2.21 = 55.89 = approx. 56 g mol-1. E.F. wt. of gaseous hydrocarbon (CH2) = 14 amu. n = M.W./E.F. wt. = 56/14 = 4. M.F. of gaseous hydrocarbon = 4 × CH2 = C4H8.

Teacher's Note: At equal T and P, density ratio equals molar mass ratio, so M = 32 × (3.86/2.21).

Exam Note: Round 55.9 to 56 before dividing by 14.

Multiple Choice Questions

Question MCQ 1. Naphthalene can be easily purified by
(a) sublimation (b) crystallisation (c) distillation (d) extraction with a solvent.

Solution. Correct answer: (a) sublimation.

Teacher's Note: Naphthalene sublimes readily on heating, leaving non-volatile impurities behind.

Exam Note: State the technique and its principle.

Question MCQ 2. A mixture of o-nitrophenol and p-nitrophenol can be separated by
(a) sublimation (b) steam distillation (c) fractional crystallization (d) simple distillation.

Solution. Correct answer: (b) steam distillation.

Teacher's Note: Only the ortho isomer, with intramolecular H-bonding, is steam volatile.

Exam Note: State the technique and its principle.

Question MCQ 3. Two volatile liquids A and B differ in their boiling points by 15K. The process which can be used to separate them is
(a) fractional distillation (b) steam distillation (c) distillation under reduced pressure (d) simple distillation.

Solution. Correct answer: (a) fractional distillation.

Teacher's Note: A small boiling point gap needs the fractionating column.

Exam Note: State the technique and its principle.

Question MCQ 4. Separation of two substances by fractional crystallization depends upon their difference in
(a) densities (b) solubilities (c) melting points (d) boiling points.

Solution. Correct answer: (b) solubilities.

Teacher's Note: Less soluble component crystallizes first on cooling.

Exam Note: State the technique and its principle.

Question MCQ 5. Glycerol which decomposes at its boiling point can be purified by
(a) steam distillation (b) simple distillation (c) distillation under reduced pressure (d) fractional distillation.

Solution. Correct answer: (c) distillation under reduced pressure.

Teacher's Note: Reduced pressure lowers the boiling point below the decomposition temperature.

Exam Note: State the technique and its principle.

Question MCQ 6. The separation of the constituents of a mixture by column chromatography depends upon their
(a) different solubilities (b) different boiling points (c) different refractive indices (d) differential adsorption.

Solution. Correct answer: (d) differential adsorption.

Teacher's Note: Components adsorb to different extents on the stationary phase.

Exam Note: State the technique and its principle.

Question MCQ 7. In Lassaigne's test, a blood red colouration indicates the presence of
(a) nitrogen (b) sulphur (c) both nitrogen and sulphur (d) both nitrogen and halogens.

Solution. Correct answer: (c) both nitrogen and sulphur.

Teacher's Note: Fe(SCN)2+ forms only if N and S are both present.

Exam Note: State the technique and its principle.

Question MCQ 8. Refining of petroleum involves the process of
(a) simple distillation (b) steam distillation (c) distillation under reduced pressure (d) fractional distillation.

Solution. Correct answer: (d) fractional distillation.

Teacher's Note: Petroleum fractions have close, graded boiling ranges.

Exam Note: State the technique and its principle.

Question MCQ 9. A substance which is insoluble in water and possesses a vapour pressure of 10-15 mm Hg at 373 K can be conveniently purified by
(a) sublimation (b) crystallization (c) distillation (d) steam distillation.

Solution. Correct answer: (d) steam distillation.

Teacher's Note: Water-insoluble liquid with small vapour pressure at 373 K suits steam distillation.

Exam Note: Tie property to technique.

Question MCQ 10. An organic substance from its aqueous solution can be separated by
(a) distillation (b) steam distillation (c) solvent extraction (d) fractional distillation.

Solution. Correct answer: (c) solvent extraction.

Teacher's Note: Shake the aqueous solution with an immiscible organic solvent to pull the compound out.

Exam Note: Name extraction.

Question MCQ 11. In steam distillation, the vapour pressure of the volatile compound is
(a) equal to atmospheric pressure (b) less than atmospheric pressure (c) more than atmospheric pressure (d) exactly half of the atmospheric pressure.

Solution. Correct answer: (b) less than atmospheric pressure. The vapour pressure of the volatile compound is less than the atmospheric pressure.

Teacher's Note: Boiling occurs when p(water) + p(compound) equals atmospheric pressure.

Exam Note: Total pressure equals atmospheric.

Question MCQ 12. 0.2 g of an organic compound on complete combustion produces 0.44 g of CO2, then the percentage of carbon in it is
(a) 50 (b) 60 (c) 70 (d) 80.

Solution. Correct answer: (b) 60. Check: % C = (12/44) × (0.44/0.2) × 100 = 60.

Teacher's Note: Use 12/44 of the CO2 mass divided by sample mass.

Exam Note: Show the 12/44 factor.

Question MCQ 13. The formula of the compound which gives violet colour in Lassaigne's test for sulphur with sodium nitroprusside is
(a) Na4[Fe(CN)5NOS] (b) Na3[Fe(CN)5NOS] (c) Na2[Fe(CN)5S] (d) Na4[Fe(CN)4S].

Solution. Correct answer: (a) Na4[Fe(CN)5NOS].

Teacher's Note: Sulphide plus nitroprusside gives violet Na4[Fe(CN)5NOS].

Exam Note: Learn the colour and formula pair.

Question MCQ 14. In Kjeldahl's method, the nitrogen present in the organic compound is converted into
(a) gaseous ammonia (b) ammonium sulphate (c) ammonium phosphate (d) ammonium nitrate.

Solution. Correct answer: (b) ammonium sulphate.

Teacher's Note: Digestion with conc. H2SO4 gives (NH4)2SO4; alkali later frees NH3.

Exam Note: Digestion product is the sulphate.

Question MCQ 15. The ratio of molecular mass to empirical formula weight in case of glucose is
(a) 2 (b) 4 (c) 6 (d) 8.

Solution. Correct answer: (c) 6. Check: C6H12O6 = 180; CH2O = 30; 180/30 = 6.

Teacher's Note: n is the ratio of molecular to empirical formula mass.

Exam Note: State n = 6.

Question MCQ 16. The empirical formula of a substance is CH2O, its vapour density is 60, what is the molecular formula?
(a) CH2O (b) C2H4O2 (c) C3H6O3 (d) C4H8O4.

Solution. Correct answer: (d) C4H8O4. Check: M = 2 × 60 = 120; CH2O = 30; n = 4.

Teacher's Note: Double the vapour density first, then divide by 30.

Exam Note: M = 2 × VD, then n.

Question MCQ 17. An organic compound having carbon, hydrogen and sulphur contains 4% sulphur. The minimum molecular weight of the compound is
(a) 200 (b) 400 (c) 600 (d) 800.

Solution. Correct answer: (d) 800. Minimum mol. wt. must contain one sulphur atom: 4 = (32/min. mol. wt.) × 100, so min. mol. wt. = 32 × 100/4 = 800.

Teacher's Note: Assume one S atom per molecule for the minimum mass.

Exam Note: Set S% = 32/M × 100.

Question MCQ 18. The molecular mass of a compound containing only one nitrogen atom can be
(a) 73 (b) 74 (c) 146 (d) 148.

Solution. Correct answer: (a) 73. Compounds containing one N atom always have odd molecular weights, i.e. 73 here.

Teacher's Note: Nitrogen rule: an odd number of N atoms gives an odd molecular mass.

Exam Note: Apply the nitrogen rule.

Question MCQ 19. A gaseous hydrocarbon having empirical formula as CH2 has a density of 1.25 g/L at NTP. The molecular formula of the hydrocarbon is
(a) C2H2 (b) C2H4 (c) C2H6 (d) C3H8.

Solution. Correct answer: (b) C2H4. Mol. wt. = wt. of 22.4 litres at N.T.P. = 1.25 × 22.4 = 28 g mol-1. Molecular formula = CH2 × (28/14) = C2H4.

Teacher's Note: Molar mass is density times 22.4 L at STP.

Exam Note: Use M = density × 22.4.

Question MCQ 20. 0.59 g of the silver salt of an organic acid (molecular weight 210) on ignition gave 0.36 g of pure silver. The basicity of the acid is
(a) 1 (b) 2 (c) 3 (d) 4.

Solution. Correct answer: (c) 3. Eq. wt. of silver salt of acid = (0.59/0.36) × 108 = 177. Eq. wt. of the acid = 177 - 108 + 1 = 70. Basicity = Mol. wt./Eq. wt. = 210/70 = 3.

Teacher's Note: Silver salt equivalent mass minus 107 gives acid equivalent mass; basicity is M over that.

Exam Note: Compute equivalent mass first.

Question MCQ 21. If two compounds have the same empirical formula but different molecular formulae, they must have
(a) different percentage composition (b) different molecular weight (c) same viscosity (d) same vapour density.

Solution. Correct answer: (b) different molecular weight.

Teacher's Note: Same empirical formula means same percentage composition; differing n gives differing molecular mass.

Exam Note: Identical percentage composition is a trap.

Question MCQ 22. The element X (atomic weight = 75) and Y (atomic weight = 16) combine to give a compound containing 75.8% X. The molecular formula of the compound is
(a) XY (b) X2Y (c) X2Y2 (d) X2Y3.

Solution. Correct answer: (d) X2Y3. X : Y = (75.8/75) : (24.2/16) = 2 : 3, i.e. X2Y3.

Teacher's Note: Divide each percentage by atomic weight; Y% = 100 - 75.8 = 24.2.

Exam Note: Ratio 1.01 : 1.51 = 2 : 3.

Question MCQ 23. A gaseous hydrocarbon has 85% carbon and vapour density of 28. The possible formula of the hydrocarbon will be
(a) C3H6 (b) C2H4 (c) C2H2 (d) C4H8.

Solution. Correct answer: (d) C4H8. Since mol. wt. = 2 × V.D. = 2 × 28 = 56, M.F. = C4H8 (85% C and 15% H give CH2, mass 14, n = 4).

Teacher's Note: Mass 56 with CH2 unit 14 gives n = 4.

Exam Note: M = 2 × VD, then n.

Question MCQ 24. Distillation under reduced pressure is employed for
(a) C6H6 (b) Petrol (c) CH2OHCHOHCH2OH (d) Organic compounds used in medicine.

Solution. Correct answer: (c) CH2OHCHOHCH2OH (glycerol).

Teacher's Note: Glycerol decomposes near its boiling point, so lower the pressure.

Exam Note: Link to decomposition at boiling point.

Question MCQ 25. Which of the following fertilizers has the highest nitrogen percentage?
(a) Ammonium sulphate (b) Calcium cyanamide (c) Urea (d) Ammonium nitrate.

Solution. Correct answer: (c) Urea. % N in (NH4)2SO4 = 21.8%; in CaCN2 = 35%; in NH2CONH2 = 46.6%; and in NH4NO3 = 35%.

Teacher's Note: Compare 28/60 for urea with the others.

Exam Note: Compute N% for each option.

Question MCQ 26. 59 g of an amide obtained from a carboxylic acid, RCOOH, upon heating with alkali liberated 17 g of ammonia. The acid is
(a) Formic acid (b) Acetic acid (c) Propionic acid (d) Benzoic acid.

Solution. Correct answer: (b) Acetic acid. RCONH2 + NaOH → RCOONa + NH3. Since 17 g of NH3 (one mole) are obtained from one mole of RCONH2 = 59 g, R + 44 = 59 or R = 15, i.e. R = CH3. The acid is CH3COOH (acetic acid).

Teacher's Note: One mole of NH3 means 59 g is one mole of amide; subtract 44 for CONH2.

Exam Note: Find R from molar mass 59.

Question MCQ 27. The property which serves as a criterion of purity of an organic compound is
(a) Solubility in water (b) Melting point (c) Density (d) Crystalline nature.

Solution. Correct answer: (b) Melting point.

Teacher's Note: A sharp, fixed melting point indicates a pure solid.

Exam Note: Impurity lowers and broadens melting range.

Question MCQ 28. Complete combustion of a sample of hydrocarbon gives 0.66 g of CO2 and 0.36 g of H2O. The empirical formula of the compound is
(a) CH2 (b) C3H4 (c) C3H8 (d) C6H8.

Solution. Correct answer: (c) C3H8. Let the wt. of hydrocarbon taken = x g. % C = (12/44) × (0.66/x) × 100 = 18/x and % H = (2/18) × (0.36/x) × 100 = 4/x. C : H = (18/12x) : (4/x) or 3 : 8. Thus, M.F. = C3H8.

Teacher's Note: Moles: C = 0.015, H = 0.04; ratio 3 : 8.

Exam Note: Use mole ratio, not percentages, when mass is unknown.

Question MCQ 29. The following is the percentage composition of a compound: Na = 16.08%, C = 4.19%, O = 16.78% and H2O = 62.95%. Its molecular formula is
(a) Na2CO3 (b) Na2CO3·H2O (c) Na2CO3·10H2O (d) Na2CO3·5H2O.

Solution. Correct answer: (c) Na2CO3·10H2O. Check: Na 16.08/23 = 0.70; C 4.19/12 = 0.35; O 16.78/16 = 1.05; H2O 62.95/18 = 3.50; ratio Na : C : O : H2O = 2 : 1 : 3 : 10.

Teacher's Note: Treat water of crystallization as a unit, divide by 18.

Exam Note: Ratio 2 : 1 : 3 : 10.

Question MCQ 30. The most satisfactory method to separate sugars is to use
(a) Fractional crystallization (b) Sublimation (c) Chromatography (d) Benedict's reagent.

Solution. Correct answer: (c) Chromatography.

Teacher's Note: Sugars are similar in properties; chromatography separates them by adsorption or partition.

Exam Note: Name chromatography.

Question MCQ 31. The Lassaigne's extract is boiled with dil. HNO3 before testing for halogens because
(a) Silver halides are soluble in HNO3 (b) Na2S and NaCN are decomposed by HNO3 (c) Ag2S is soluble in HNO3 (d) AgCN is soluble in HNO3.

Solution. Correct answer: (b) Na2S and NaCN are decomposed by HNO3.

Teacher's Note: Removes S2- and CN- that would precipitate with Ag+.

Exam Note: Cite interfering ions.

Question MCQ 32. The compound that does not give a blue colour in Lassaigne's test is
(a) Aniline (b) Glycine (c) Hydrazine (d) Urea.

Solution. Correct answer: (c) Hydrazine. Lassaigne's test is based upon the formation of NaCN. Since hydrazine (NH2NH2) does not contain carbon, it cannot form NaCN during Na fusion and hence does not give blue colour. All the remaining three compounds (aniline, glycine and urea) contain both C and N needed for the formation of NaCN and thus give blue colour.

Teacher's Note: Blue Prussian colour needs NaCN, which needs carbon in the compound.

Exam Note: Hydrazine has no carbon.

Question MCQ 33. 0.24 g of a volatile liquid upon vapourization gives 45 ml of vapours at NTP. What will be the vapour density of the substance? (Density of H2 = 0.089 g L-1).
(a) 95.39 (b) 5.993 (c) 95.93 (d) 59.93.

Solution. Correct answer: (d) 59.93. V.D. = (wt. of 45 ml of vapours of the liquid at NTP)/(wt. of 45 ml of H2 at NTP) = 0.24/(45 × 0.089/1000) = 59.93.

Teacher's Note: Compare equal volumes: liquid vapour mass over hydrogen mass.

Exam Note: Convert 45 ml to litres for H2 mass.

Question MCQ 34. An organic compound containing C, H and N gave the following analysis: C = 40%, H = 13.33%, N = 46.67%. What would be its empirical formula?
(a) C2H7N (b) C2H7N2 (c) CH4N (d) CH3N.

Solution. Correct answer: (c) CH4N. Corrected: the book's answer key prints (a), but its own explanation gives C : H : N = 40/12 : 13.33/1 : 46.67/14 = 3.33 : 13.33 : 3.33 = 1 : 4 : 1, i.e. CH4N, which is option (c).

Teacher's Note: Equal C and N moles with four times as many H give CH4N.

Exam Note: Show the 1 : 4 : 1 ratio.

Question MCQ 35. Empirical formula of a compound is CH2O. If its molecular weight is 180, then the molecular formula of the compound is
(a) C6H12O6 (b) C5H10O5 (c) C3H6O3 (d) C4H8O4.

Solution. Correct answer: (a) C6H12O6. Check: 180/30 = 6, so (CH2O)6 = C6H12O6.

Teacher's Note: n = 180/30 = 6.

Exam Note: State n = 6.

Question MCQ 36. The Beilstein test for organic compounds is used to detect
(a) Nitrogen (b) Sulphur (c) Carbon (d) Halogens.

Solution. Correct answer: (d) Halogens.

Teacher's Note: Volatile cupric halides colour the flame bluish green.

Exam Note: Name the test and the flame colour.

Question MCQ 37. Two organic compounds A and B both containing C and H yield, on analysis, the same percent composition by weight: C = (12/13) × 100%, H = (1/13) × 100%. A decolourises bromine water, B does not. Identify A and B
(a) A = C2H2, B = C6H6 (b) A = C6H6, B = C2H2 (c) A = C2H4, B = C2H6 (d) A = C2H2, B = C3H8.

Solution. Correct answer: (a) A = C2H2, B = C6H6. C : H = (12/13)(100/12) : (1/13)(100/1) or C : H = 1 : 1. Thus E.F. = CH. If E.F. is CH then M.F. must be either C2H2 or C6H6. Since A decolourises Br2 water, A = C2H2. Since B does not decolourize Br2-water, it must be C6H6 (benzene).

Teacher's Note: Empirical formula CH fits both; bromine water test separates alkyne from benzene.

Exam Note: Use bromine test to assign.

Question MCQ 38. How should 100 ml of carbon tetrachloride be added to extract maximum amount of iodine?
(a) 100 ml once (b) 50 ml twice (c) 25 ml four times (d) 10 ml ten times.

Solution. Correct answer: (d) 10 ml ten times. With a fixed volume of CCl4, larger the number of extractions, more is the amount of I2 extracted. Thus, option (d) is correct.

Teacher's Note: Repeated extraction with small portions beats one large portion.

Exam Note: State: more portions, more extraction.

Question MCQ 39. Number of grams of oxygen in 32.2 g Na2SO4·10H2O is
(a) 20.8 (b) 22.4 (c) 2.24 (d) 12.08.

Solution. Correct answer: (b) 22.4. Mol. wt. of Na2SO4·10H2O = 322. 32.2 g contain oxygen = (14 × 16 × 32.2)/322 = 22.4 g.

Teacher's Note: Count 4 + 10 = 14 oxygen atoms per formula unit.

Exam Note: Include water oxygens.

Question MCQ 40. The haemoglobin contains 0.33% of iron by weight. Its molecular weight is 67200. The number of iron atoms in each molecule of haemoglobin is (atomic weight of Fe = 56)
(a) 2 (b) 3 (c) 4 (d) 5.

Solution. Correct answer: (c) 4. Wt. of Fe present in 67200 g of haemoglobin = (0.33/100) × 67200 = 221.76 g. No. of atoms of Fe in one molecule = 221.76/56 = 3.96 = 4.0.

Teacher's Note: Mass of iron per mole divided by atomic mass gives atoms per molecule.

Exam Note: Round 3.96 to 4.

Question MCQ 41. 0.1914 g of an organic acid is dissolved in about 20 ml of water. 25 ml of 0.12 N NaOH is required for the complete neutralization of the acid solution. The equivalent weight of the acid is
(a) 65 (b) 64 (c) 63.80 (d) 62.50.

Solution. Correct answer: (c) 63.80. 25 ml of 0.12 N NaOH = 0.1914 g of acid; 1000 ml of 1 N NaOH = (0.1914/0.12) × (1000/25) = 63.80.

Teacher's Note: Equivalent mass is grams of acid per equivalent of base.

Exam Note: Convert ml × N to equivalents.

Question MCQ 42. The density of air is 0.00130 g/ml. The vapour density of air will be
(a) 0.00065 (b) 0.65 (c) 14.4816 (d) 14.56.

Solution. Correct answer: (d) 14.56. V.D. = density of air / wt. of 1 ml of H2 = 0.00130/0.0000893 = 14.56 (the book prints the hydrogen density as 0.00089).

Teacher's Note: Vapour density is density relative to hydrogen at the same conditions.

Exam Note: Divide by hydrogen density 0.0000893 g/ml.

Question MCQ 43. A compound has C, H, N in the following percentage C = 40%, H = 13.33%, N = 46.67%. What is its empirical formula?
(a) CH2N (b) C2H5N (c) CH5N (d) CH4N.

Solution. Correct answer: (d) CH4N. C : H : N = 40/12 : 13.33/1 : 46.67/14 = 1 : 4 : 1, E.F. = CH4N.

Teacher's Note: Same data as Q.34; ratio 1 : 4 : 1.

Exam Note: Show the mole ratio.

Question MCQ 44. Percentage of Se in peroxidase anhydrous enzyme is 0.5% by weight (at. wt. = 78.4) then minimum molecular weight of peroxidase anhydrous enzyme is
(a) 11.568 × 104 (b) 1.568 × 104 (c) 15.68 (d) 2.136 × 104.

Solution. Correct answer: (b) 1.568 × 104. Min. mol. wt. = (78.4 × 100)/0.5 = 1.568 × 104.

Teacher's Note: One Se atom per molecule gives the minimum molar mass.

Exam Note: Mass = atomic mass × 100/percent.

Question MCQ 45. In steam distillation of toluene, the pressure of toluene in vapour is
(a) equal to pressure of barometer (b) less than pressure of barometer (c) equal to vapour pressure of toluene in simple distillation (d) more than the vapour pressure of toluene in simple distillation.

Solution. Correct answer: (b) less than pressure of barometer.

Teacher's Note: Partial pressures of water and toluene add up to atmospheric pressure, so each is lower.

Exam Note: Sum of partial pressures equals barometric pressure.

Question MCQ 46. In a compound C, H and N atoms are present in 9 : 1 : 3.5 by weight. If molecular weight of the compound is 108, then the molecular formula of the compound is
(a) C2H6N2 (b) C3H4N (c) C6H8N2 (d) C9H12N3.

Solution. Correct answer: (c) C6H8N2. Ratio of wts. C : H : N = 9/12 : 1/1 : 3.5/14 = 3 : 4 : 1, so E.F. = C3H4N and E.F. wt. = 3 × 12 + 4 × 1 + 14 = 54. M.F. = E.F. × (108/54) = C6H8N2.

Teacher's Note: Weight ratio becomes mole ratio after dividing by atomic masses.

Exam Note: Empirical mass 54, so n = 2.

Question MCQ 47. An organic compound contains 49.3% carbon, 6.84% hydrogen and its vapour density is 73. Molecular formula of the compound is
(a) C3H8O2 (b) C3H10O2 (c) C6H9O (d) C4H10O2 (e) C6H10O4.

Solution. Correct answer: (e) C6H10O4. C : H : O = 49.3/12 : 6.84/1 : 43.86/16 = 1.5 : 2.5 : 1 = 6 : 10 : 4. Check: M = 2 × 73 = 146 = C6H10O4 (72 + 10 + 64).

Teacher's Note: Oxygen by difference (43.86%); the ratio 1.5 : 2.5 : 1 doubles to 3 : 5 : 2.

Exam Note: Verify with mass 146.

Question MCQ 48. 116 mg of a compound on vaporisation in a Victor Meyer's apparatus displaces 44.8 ml of air measured at S.T.P. The molecular mass of the compound is
(a) 116 (b) 232 (c) 58 (d) 44.8 (e) 46.4.

Solution. Correct answer: (c) 58. Mol. mass = (116/44.8) × (22400/1000) = 58 g mol-1.

Teacher's Note: Scale 116 mg per 44.8 ml up to 22400 ml.

Exam Note: Keep mg and ml units consistent.

Question MCQ 49. In Lassaigne's test, a blue colour is obtained if the organic compound contains nitrogen. Then blue colour is due to
(a) K4[Fe(CN)6] (b) Fe4[Fe(CN)6]3 (c) Na3[Fe(CN)6] (d) Cu2[Fe(CN)6] (e) Na2[Fe(CN)5NO].

Solution. Correct answer: (b) Fe4[Fe(CN)6]3.

Teacher's Note: Ferric ferrocyanide, Prussian blue, forms from NaCN with FeSO4 and Fe3+.

Exam Note: Name Prussian blue.

Question MCQ 50. The compound formed in the positive test for nitrogen with the Lassaigne solution of an organic compound is
(a) Fe4[Fe(CN)6]3 (b) Na3[Fe(CN)6] (c) Fe(CN)3 (d) Na4[Fe(CN)5COS].

Solution. Correct answer: (a) Fe4[Fe(CN)6]3.

Teacher's Note: Same compound as Q.49: Prussian blue is the nitrogen test product.

Exam Note: Do not confuse with the sulphur test complex.

Question MCQ 51. The ammonia evolved from the treatment of 0.30 g of an organic compound for the estimation of nitrogen was passed in 100 ml of 0.1 M sulphuric acid. The excess of acid required 20 ml of 0.5 M sodium hydroxide solution for complete neutralization. The organic compound is
(a) acetamide (b) benzamide (c) urea (d) thiourea.

Solution. Correct answer: (c) urea. Let the vol. of acid left unused = v ml of 0.1 M H2SO4: v × 0.1 × 2 = 20 × 0.5 × 1, so v = 50 ml. % N = (1.4 × 2 × 50 × 0.1)/0.3 = 46.6. % N in urea (NH2CONH2) = (28/60) × 100 = 46.6%; in acetamide = 23.72%; benzamide = 11.57%; thiourea = 36.84%. Thus, option (c) is correct.

Teacher's Note: Acid consumed by NH3 is 100 - 50 = 50 ml; match % N to a candidate.

Exam Note: Compare computed % N with each compound.

Question MCQ 52. A compound has empirical formula C2H4O. An independent analysis gave a value of 132.16 for its molecular mass. What is the correct molecular formula
(a) C4H4O5 (b) C10H12 (c) C7O3 (d) C6H12O3 (e) C4H8O5.

Solution. Correct answer: (d) C6H12O3. Check: empirical formula mass = 44; 132.16/44 = 3.0, so n = 3 and M.F. = (C2H4O)3 = C6H12O3.

Teacher's Note: n = 132/44 = 3.

Exam Note: Divide molecular by empirical mass.

Additional Questions for All Competitive Examinations

Assertion-Reason Type Questions

Options: (a) both assertion and reason are correct and the reason is the correct explanation of the assertion; (b) both are correct but the reason is not the correct explanation; (c) assertion is correct but reason is incorrect; (d) assertion is incorrect but reason is correct.

Question Assertion-Reason 1. Assertion: Acetone (b.p. 329 K) and methyl alcohol (b.p. 338 K) are separated by fractional distillation.
Reason: Fractional distillation helps in separating two liquids from their mixture when their boiling points differ by 10° or so.

Solution. Answer: (a). Both correct; the 9 K gap is why a fractionating column is needed.

Teacher's Note: Link boiling point gap to the method.

Exam Note: Judge assertion and reason separately.

Question Assertion-Reason 2. Assertion: A mixture of o-nitrophenol and p-nitrophenol can be separated by steam distillation.
Reason: o-Nitrophenol is steam volatile but water soluble while p-nitrophenol is not steam volatile.

Solution. Answer: (c). Assertion correct; the reason is incorrect since o-nitrophenol is steam volatile and not water soluble.

Teacher's Note: Intramolecular H-bonding makes the ortho isomer steam volatile.

Exam Note: Identify the faulty reason.

Question Assertion-Reason 3. Assertion: Essential oils are purified by steam distillation.
Reason: Essential oils are volatile and are insoluble in water.

Solution. Answer: (a). Both correct, and insolubility with volatility is exactly why steam distillation works.

Teacher's Note: Volatile and water-immiscible compounds suit steam distillation.

Exam Note: Reason explains assertion.

Question Assertion-Reason 4. Assertion: Hydrazine contains nitrogen but does not give Lassaigne's test for nitrogen.
Reason: Hydrazine reacts with fused sodium to give H2 gas.

Solution. Answer: (b). Both correct, but the reason is not the explanation; hydrazine has no carbon so NaCN cannot form.

Teacher's Note: No carbon means no NaCN; the H2 evolution is unrelated.

Exam Note: Real cause: absence of carbon.

Question Assertion-Reason 5. Assertion: Lassaigne's test is not shown by diazonium salts.
Reason: Diazonium salts lose N2 on heating much before they have a chance to react with fused sodium.

Solution. Answer: (a). Both correct; loss of N2 before reaction with sodium explains the failed test.

Teacher's Note: Nitrogen escapes as N2 before NaCN can form.

Exam Note: Reason explains assertion.

Question Assertion-Reason 6. Assertion: Vapour density is the same thing as density.
Reason: Molecular weight is twice vapour density.

Solution. Answer: (d). Assertion incorrect (vapour density is a unitless ratio relative to hydrogen); reason correct.

Teacher's Note: Vapour density has no units; density does.

Exam Note: Spot the false assertion.

Question Assertion-Reason 7. Assertion: Dumas method is more applicable to nitrogen containing organic compounds than Kjeldahl's method.
Reason: Kjeldahl's method does not give satisfactory results for compounds in which nitrogen is linked to oxygen. (A.I.I.M.S. 1995)

Solution. Answer: (b). Both correct, as printed answer (b); the reason is a related fact rather than the full explanation of the assertion.

Teacher's Note: Kjeldahl fails for nitro, azo and ring nitrogen; Dumas handles all.

Exam Note: Printed key is (b).

True/False Statements (Which statements are true and which are false? Rewrite the false statement correctly)

Question True/False 1. Melting point, boiling point, refractive index are generally used as criteria of purity of an organic compound.

Solution. True.

Teacher's Note: Sharp, fixed physical constants indicate purity.

Exam Note: Say true.

Question True/False 2. Benzoic acid can be extracted from water using ethanol.

Solution. False, using benzene, chloroform etc. Corrected statement: benzoic acid can be extracted from water using benzene, chloroform etc. (ethanol is miscible with water).

Teacher's Note: Extraction needs a solvent immiscible with water.

Exam Note: Ethanol mixes with water; benzene does not.

Question True/False 3. Beilstein test for halogens is not always dependable.

Solution. True.

Teacher's Note: Some nitrogen compounds (urea, thiourea) also give a positive test.

Exam Note: Cite urea or thiourea.

Question True/False 4. The rapid cooking in pressure cookers is based upon the principle that boiling point of water increases with increase in pressure.

Solution. True.

Teacher's Note: Higher pressure raises the boiling point, so food cooks at higher temperature.

Exam Note: State the pressure-boiling point link.

Question True/False 5. Kjeldahl's method for estimation of nitrogen is applicable to all types of nitrogen containing organic compounds.

Solution. False, not applicable to compounds containing -NO2, -N=N- groups or nitrogen in the ring.

Teacher's Note: Such nitrogen is not converted to ammonium sulphate on digestion.

Exam Note: List nitro, azo and ring nitrogen.

Question True/False 6. If the organic compound contains nitrogen and sulphur, sodium thiocyanate is always formed in the Lassaigne's test.

Solution. False, sodium thiocyanate is formed only when the amount of sodium is insufficient as compared to C, N and S content of the organic compound.

Teacher's Note: Excess sodium gives NaCN and Na2S instead of NaCNS.

Exam Note: Mention insufficient sodium condition.

Question True/False 7. Anhydrous CuSO4 is blue.

Solution. False, hydrated copper sulphate (CuSO4·5H2O) is blue. Anhydrous CuSO4 is white.

Teacher's Note: Water of crystallization gives the blue colour; the anhydrous salt is white.

Exam Note: Blue needs hydration.

Fill in the Blanks

Question Fill in the Blanks 1. Benzoic acid containing an impurity of naphthalene can be purified by crystallization using ................ as the solvent.

Solution. Water.

Teacher's Note: Benzoic acid is soluble in hot water, naphthalene is not.

Exam Note: Answer: water.

Question Fill in the Blanks 2. In column chromatography, the ............... constitutes the stationary phase and the ............... as the mobile phase.

Solution. Silica gel or alumina; organic solvent.

Teacher's Note: Adsorbent is stationary; solvent flows through as mobile phase.

Exam Note: Name both phases.

Question Fill in the Blanks 3. The boiling point of a liquid is the temperature at which its ........... becomes equal to the atmospheric pressure.

Solution. Vapour pressure.

Teacher's Note: Boiling begins when vapour pressure matches external pressure.

Exam Note: Answer: vapour pressure.

Question Fill in the Blanks 4. Liquids which decompose at or below their boiling points are purified by ...............

Solution. Distillation under reduced pressure.

Teacher's Note: Lower pressure reduces boiling temperature below decomposition.

Exam Note: Name vacuum distillation.

Question Fill in the Blanks 5. Liquids whose boiling points differ by about 10 K can be separated by ...............

Solution. Fractional distillation.

Teacher's Note: Small boiling point differences need a fractionating column.

Exam Note: Answer: fractional distillation.

Question Fill in the Blanks 6. In column chromatography, the ............ adsorbed component will elute with the more ............ solvent.

Solution. Strongly; polar.

Teacher's Note: Strongly adsorbed components need a more polar eluent to be displaced.

Exam Note: Answer: strongly, polar.

Question Fill in the Blanks 7. Steam distillation is used to separate compounds which are .... with water but volatile in .... .

Solution. Immiscible; steam.

Teacher's Note: Compound must be water-immiscible and steam volatile.

Exam Note: Answer: immiscible, steam.

Question Fill in the Blanks 8. In Lassaigne's test, conc. HNO3 is used to destroy ............ and ............

Solution. NaCN; Na2S.

Teacher's Note: Both would otherwise precipitate with silver nitrate.

Exam Note: Answer: NaCN, Na2S.

Question Fill in the Blanks 9. In Beilstein test, the bluish green flame is due to the formation of volatile ...............

Solution. Cupric halides.

Teacher's Note: Copper halides vaporize and colour the flame.

Exam Note: Answer: cupric halides.

Question Fill in the Blanks 10. In sublimation, a solid changes directly from ............... state to the ............... state.

Solution. Solid; gaseous.

Teacher's Note: Sublimation skips the liquid phase.

Exam Note: Answer: solid to gaseous.

Question Fill in the Blanks 11. In the detection of phosphorus, the organic compound is fused with ...............

Solution. Sodium peroxide.

Teacher's Note: Oxidative fusion converts phosphorus to phosphate.

Exam Note: Answer: sodium peroxide.

Question Fill in the Blanks 12. In the estimation of carbon and hydrogen, the CO2 formed is absorbed in .... and the water formed is absorbed in ...............

Solution. KOH; anhydrous CaCl2.

Teacher's Note: CaCl2 tube first for water, KOH tube second for CO2.

Exam Note: Answer: KOH and anhydrous CaCl2.

Question Fill in the Blanks 13. In Duma's method, the function of reduced copper gauze is to convert oxides of ............... to ....... .

Solution. Nitrogen; N2 (nitrogen gas).

Teacher's Note: Hot copper removes oxygen from nitrogen oxides.

Exam Note: Answer: oxides of nitrogen to N2.

Question Fill in the Blanks 14. In Carius method for the estimation of halogens, the organic compound is heated with ............... and a few crystals of ............... in a sealed tube.

Solution. Fuming HNO3; AgNO3.

Teacher's Note: Silver halide is precipitated and weighed.

Exam Note: Answer: fuming HNO3, AgNO3.

Question Fill in the Blanks 15. In Carius method for sulphur and phosphorus, sulphur is estimated as ............... and phosphorus as ...............

Solution. BaSO4; Mg2P2O7.

Teacher's Note: Weighable final precipitates for each element.

Exam Note: Answer: BaSO4, Mg2P2O7.

Question Fill in the Blanks 16. The molecular mass of an organic acid = Eq. mass × ...............

Solution. Basicity.

Teacher's Note: Molecular mass is equivalent mass multiplied by basicity.

Exam Note: Answer: basicity.

Question Fill in the Blanks 17. In Kjeldahl's method during digestion, nitrogen of the organic compound is converted into ...............

Solution. (NH4)2SO4.

Teacher's Note: Digestion with conc. H2SO4 gives ammonium sulphate.

Exam Note: Answer: (NH4)2SO4.

Question Fill in the Blanks 18. Gram molecular mass of a substance = weight of ............ cm3 of the vapours of the substance at ...........

Solution. 22400; STP.

Teacher's Note: One mole of gas occupies 22400 cm3 at STP.

Exam Note: Answer: 22400 cm3 at STP.

Question Fill in the Blanks 19. The volumetric method for the determination of equivalent mass of acids and bases is based upon the principle that acids and bases always react in ............

Solution. Equivalent amounts.

Teacher's Note: Neutralization occurs equivalent to equivalent.

Exam Note: Answer: equivalent amounts.

Question Fill in the Blanks 20. When an ammonium salt is heated with aqueous alkali solution .... is evolved.

Solution. NH3.

Teacher's Note: Ammonium ion plus hydroxide releases ammonia gas.

Exam Note: Answer: NH3.

Matching Type Questions (Match the entries in columns X and Y)

Question Matching 1. Column X: Victor-Meyer's method - match with the entry in column Y.

Solution. Match: 1 - 3. Column Y entry 3: Displaced air is collected over water.

Teacher's Note: Victor Meyer measures displaced air volume.

Exam Note: Match X with Y.

Question Matching 2. Column X: Kjeldahl's method - match with the entry in column Y.

Solution. Match: 2 - 4. Column Y entry 4: Ammonium sulphate is heated with strong aqueous alkali.

Teacher's Note: Ammonium sulphate liberates NH3 with alkali.

Exam Note: Match X with Y.

Question Matching 3. Column X: Duma's method - match with the entry in column Y.

Solution. Match: 3 - 2. Column Y entry 2: N2 gas is collected over conc. KOH solution.

Teacher's Note: N2 is measured over KOH, which absorbs CO2.

Exam Note: Match X with Y.

Question Matching 4. Column X: Beilstein test - match with the entry in column Y.

Solution. Match: 4 - 5. Column Y entry 5: Volatile cupric halides.

Teacher's Note: Copper halide vapour gives bluish green flame.

Exam Note: Match X with Y.

Question Matching 5. Column X: Ammonium molybdate - match with the entry in column Y.

Solution. Match: 5 - 1. Column Y entry 1: Detection of phosphorus.

Teacher's Note: Ammonium molybdate gives yellow precipitate with phosphate.

Exam Note: Match X with Y.

Download Pradeep's KL Gogia Solutions for Class 11 Math PDF

Complete Math Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 16 Purification Characterisation Of Carbon Compounds Part 2

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 16 Purification Characterisation Of Carbon Compounds Part 2 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Pradeep's KL Gogia Solutions

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Explore More Study Resources for Class 11 Math

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.