Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 15 Hydrocarbons Part 3

Official Pradeep's KL Gogia Textbook Solutions: Class 11 Chemistry Chapter 15 Hydrocarbons

Explore reliable textbook solutions for Chapter 15 Hydrocarbons tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Chapter-wise Solutions for Chemistry: Chapter 15 Hydrocarbons

View or download the dedicated Chapter 15 Hydrocarbons solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Hydrocarbons - Part 3 (Pages 15/69 to 15/102)

Solved Examples

Question 15.7. Predict which of the following systems would be aromatic and why? (i) a bicyclic system of a five-membered and a seven-membered ring fused (azulene type, 10 π-electrons); (ii) cyclobutadiene; (iii) biphenyl (two benzene rings joined); (iv) cycloheptatriene-type ring containing one sp3 carbon with three double bonds. (N.C.E.R.T.)

Solution. Compound (i) contains (4n + 2) π electrons where n = 2, i.e., it contains 5 × 2 = 10 π-electrons and hence according to Huckel rule, it is aromatic.
Compound (iii) is also aromatic since it contains two benzene rings each one of which contains (4n + 2) π-electrons with n = 1, i.e., 3 × 2 = 6 electrons.
Compound (ii) is a 4n π (n = 1) electron system and hence it is an antiaromatic compound.
Although compound (iv) contains 6π-electrons, i.e. (4n + 2) π electrons with n = 1, yet the system is not completely conjugated due to the presence of a sp3-hybridized carbon. In other words, this compound is not planar and hence is not aromatic.

Teacher's Note: Check four conditions: cyclic, planar, fully conjugated, (4n + 2) π electrons. An sp3 carbon breaks conjugation.

Exam Note: Always state n and the π-electron count for each ring.

Question 15.8 (Cetane number). A sample of diesel has the same knocking characteristics as a 60 ml mixture of cetane and α-methylnaphthalene mixed in 2 : 1 ratio (v/v). What is the cetane number of the diesel sample? (N.C.E.R.T.)

Solution. Vol. of cetane = 60 × 2/3 = 40 ml
Vol. of α-methylnaphthalene = 60 × 1/3 = 20 ml
∴ Cetane number of diesel sample = (40/60) × 100 = 66.6 (more precisely 66.67).

Teacher's Note: Cetane number is the volume percentage of cetane in the cetane/α-methylnaphthalene mixture.

Exam Note: Show volumes first, then percentage; 66.67 is accepted.

Conceptual Questions

Question 1. Is it possible to isolate pure staggered ethane or pure eclipsed ethane at room temperature? Explain.

Solution. The energy difference between staggered and eclipsed forms of ethane is just 12.55 kJ mol−1 which is easily met by collisions of the molecules at room temperature. Therefore, it is not possible to isolate either pure staggered or pure eclipsed ethane at room temperature.

Teacher's Note: Conformers interconvert freely because the rotation barrier is tiny compared with thermal energy.

Exam Note: Quote the 12.55 kJ/mol barrier and collisions.

Question 2. Consider 2-methylpropane (isobutane). Sighting along C1 − C2 bond: (i) Draw Newman projections for the most stable and the least stable conformation. (ii) If a methyl-hydrogen interaction costs 5.85 kJ mol−1 and a hydrogen-hydrogen interaction costs 4.18 kJ mol−1 of energy, calculate the energy difference between these conformations.

Solution. 2-Methylpropane may be regarded as 1,1-dimethylethane. Sighting along C1 − C2 bond, the Newman projections are drawn in the book; in words: the front carbon (C1) carries three hydrogens and the back carbon (C2) carries two CH3 groups and one H. In the staggered (most stable) form the front H atoms are staggered with respect to the groups on the back carbon; in the eclipsed (least stable) form each front H is exactly in front of a back group.
Now eclipsed conformation has two methyl-hydrogen and one hydrogen-hydrogen interactions, therefore, the energy of eclipsed conformation is expected to be more than that of staggered conformation by 2 × 5.85 + 1 × 4.18 = 15.88 kJ mol−1.

Teacher's Note: Count eclipsing interactions: two CH3/H pairs plus one H/H pair.

Exam Note: Show 2 × 5.85 + 4.18 = 15.88 kJ/mol.

Question 3. Why propane has only one eclipsed conformation while butane has two? Explain. (N.C.E.R.T.)

Solution. For purpose of writing conformations, propane may be regarded as 1-methylethane while butane may be regarded as 1,2-dimethylethane. Since propane has only one methyl group, therefore it has only one eclipsed conformation in which there is one strong methyl-hydrogen and two weak hydrogen-hydrogen interactions.
However, in case of butane, there are two methyl groups, one each on each carbon and hence has two eclipsed conformations. (i) fully eclipsed conformation in which there are one severe methyl-methyl interaction and two weak hydrogen-hydrogen interactions. (ii) partially eclipsed conformation in which there are two strong methyl-hydrogen interactions and one weak hydrogen-hydrogen interaction. (Newman projections are given in the book, Fig. 15.10 and 15.11.)

Teacher's Note: Treat propane as ethane with one CH3, butane as ethane with two CH3 groups.

Exam Note: Name both butane eclipsed forms with their interactions.

Question 4. Which of the following has the highest boiling point? (i) 2-methylpentane (ii) 2,3-dimethylbutane (iii) 2,2-dimethylbutane. (N.C.E.R.T.)

Solution. As the branching increases, surface area decreases. As a result, magnitude of van der Waal's forces of attraction decreases and hence the boiling point decreases. Now 2-methylpentane has the largest surface area and hence has the highest boiling point. Further because of two branches on the same carbon, 2,2-dimethylbutane has lower surface area and hence lower boiling point than 2,3-dimethylbutane. Thus, the overall order of decreasing boiling points is 2-methylpentane (333 K) > 2,3-dimethylbutane (331 K) > 2,2-dimethylbutane (323 K).

Teacher's Note: More branching means a more spherical molecule, less surface contact and weaker van der Waals forces.

Exam Note: Answer (i); link branching to surface area.

Question 5. What effect the branching of an alkane has on its melting point? (N.C.E.R.T.)

Solution. In general, as the branching increases, the packing of the molecules in the crystal lattice becomes less close and hence the m.p. decreases accordingly. However, if the branching makes the molecule symmetrical, the packing of the molecules in the crystal lattice becomes close and hence the m.p. increases. For example, m.p. of isopentane (113 K) is lower than of n-pentane (143 K) but the m.p. of neopentane (256 K) is much higher than that of isopentane and n-pentane.

Teacher's Note: Melting point depends on crystal packing, so symmetry beats branching.

Exam Note: Quote neopentane 256 K as the symmetrical exception.

Question 6. trans-Pent-2-ene is polar while trans-but-2-ene is non-polar. Explain.

Solution. In trans-but-2-ene, the dipole moments of the two C–CH3 bonds are equal and opposite and hence they exactly cancel out each other. Thus, trans-but-2-ene is non-polar (μ = 0).
However, in trans-pent-2-ene, the dipole moments of C–CH3 and C–CH2CH3 bonds are unequal. Although these two dipoles oppose each other, yet they do not exactly cancel out each other and hence trans-pent-2-ene has a small but finite dipole moment and thus is polar (μ > 0).

Teacher's Note: Vector sum of bond dipoles: identical groups cancel, different alkyl groups do not.

Exam Note: Compare the two dipoles in a trans arrangement.

Question 7. Predict the products when each one of the following: (a) Cyclobutene (b) 1-methylcyclobutene and (c) 1,2-dimethylcyclobutene, is subjected to (i) hot KMnO4 solution (ii) ozone followed by treatment with Zn/H2O.

Solution. (a) Cyclobutene: (i) hot KMnO4 gives butane-1,4-dioic acid (succinic acid), HOOC–CH2–CH2–COOH; (ii) O3 then Zn/H2O gives butane-1,4-dial (succinaldehyde), OHC–CH2–CH2–CHO.
(b) 1-Methylcyclobutene: (i) hot KMnO4 gives 4-oxopentanoic acid, CH3–CO–CH2–CH2–COOH; (ii) O3, Zn/H2O gives 4-oxopentanal, CH3–CO–CH2–CH2–CHO.
(c) 1,2-Dimethylcyclobutene: with hot KMnO4 or O3, Zn/H2O gives hexane-2,5-dione, CH3–CO–CH2–CH2–CO–CH3.

Teacher's Note: Cleave the ring C=C: each =CH becomes CHO (or COOH with KMnO4), each =C(R) becomes ketone.

Exam Note: Ring opens to a single chain with two carbonyl groups.

Question 8. How will you prepare 3-methylbut-1-yne by starting with ethyne?

Solution. HC≡CH + Na, NH3(l) (196 K) → HC≡C−Na+ (sodium acetylide).
HC≡C−Na+ + CH3–CH(CH3)–I (isopropyl iodide) → CH3–CH(CH3)–C≡CH (3-methylbut-1-yne) + NaI.

Teacher's Note: Acetylide is a nucleophile; use a secondary halide carrying the isopropyl group.

Exam Note: Write both steps with reagents.

Question 9. How will you prepare (i) cis-pent-2-ene and (ii) trans-pent-2-ene by starting with ethyne?

Solution. HC≡CH + Na, NH3(l), 196 K → HC≡C−Na+; then + CH3I → CH3–C≡CH (propyne) + NaI. Propyne + Na, NH3(l), 196 K → CH3–C≡C−Na+; then + CH3CH2I → CH3–C≡C–CH2CH3 (pent-2-yne) + NaI.
(i) Pent-2-yne + H2/Pd–BaSO4 + S or quinoline → cis-pent-2-ene.
(ii) Pent-2-yne + Na/liq. NH3 (196 K) → trans-pent-2-ene.

Teacher's Note: Lindlar gives cis by syn addition; Na/liq. NH3 gives trans by anti addition.

Exam Note: Name the catalyst/reagent deciding cis or trans.

Question 10. Starting with acetylene, how will you prepare pentan-2-one?

Solution. Prepare pent-2-yne as discussed in Q. 9 (the book cites Q. 6) and then convert it to pentan-2-one by hydration: CH3–C≡C–CH2CH3 + H2O (60% H2SO4, HgSO4, 333 K) → [CH3–C(OH)=CH–CH2CH3] (enol) → (tautomerises) CH3–CO–CH2CH2CH3 (pentan-2-one).

Teacher's Note: Alkyne hydration gives enol that tautomerises to ketone.

Exam Note: Pent-2-yne hydration can give a mixture; follow the book.

Question 11. Acetylene reacts with dil. H2SO4 in presence of mercury salts to give acetaldehyde but with dil. HCl under similar conditions, it gives vinyl chloride. Explain why?

Solution. First of all mercury ions form a complex (I) with acetylene. Since H2O is more nucleophilic than SO42− ion, it attacks the complex to form first vinyl alcohol which then tautomerises to give acetaldehyde: HC≡CH + Hg2+ → complex (I); + H2O (−Hg2+) → CH2=CHOH (vinyl alcohol) → CH3CHO.
In case of dil. HCl, since Cl− ion is more nucleophilic than H2O, it reacts with complex (I) to form vinyl chloride, CH2=CHCl (with loss of Hg2+).

Teacher's Note: The nucleophile attacking the Hg-complex decides the product: Cl− beats H2O, which beats SO42−.

Exam Note: Compare nucleophilicity of Cl−, H2O, SO42−.

Question 12. How will you separate a mixture of ethane, ethylene and acetylene?

Solution. This mixture can be separated into its constituents by the following steps:
Step 1. Pass the mixture of gases through Tollens' reagent when acetylene will form white precipitate of disilver acetylide while ethane and ethylene will pass through. HC≡CH + 2[Ag(NH3)2]+OH− → AgC≡CAg + 4NH3 + 2H2O. Separate the white ppt. by filtration and treat it with dil. HNO3 to regenerate acetylene: AgC≡CAg + 2HNO3 → HC≡CH + 2AgNO3.
Step 2. Pass the mixture of ethane and ethylene through cold conc. H2SO4 when ethylene will be absorbed as ethyl hydrogen sulphate while ethane escapes and is collected. CH2=CH2 + H2SO4(conc.) → CH3CH2OSO2OH. The ethyl hydrogen sulphate is heated to 433–443 K when ethylene is obtained: CH3CH2OSO3H → CH2=CH2 + H2SO4.

Teacher's Note: Only the terminal alkyne has acidic H (Tollens ppt); alkene is absorbed by cold conc. H2SO4.

Exam Note: Give Tollens then cold conc. H2SO4, with regeneration steps.

Question 13. A conjugated alkadiene having molecular formula C13H22 on ozonolysis yielded ethyl methyl ketone and cyclohexanecarbaldehyde. Identify the diene, write its structural formula and give its IUPAC name. (N.C.E.R.T.)

Solution. The structures of the products of ozonolysis are: ethyl methyl ketone (C4H8O), CH3CH2C(CH3)=O, and cyclohexanecarbaldehyde (C7H12O), cyclohexyl–CHO.
Since the total number of carbon atoms of the two products is 11 (4 + 7), therefore, there must have also produced another two carbon product. Further since the given compound (C13H22) is an alkadiene, therefore, this two carbon product must be glyoxal, O=CH–CH=O. Replace the oxygen atoms from these three products by double bonds, the structure of the alkadiene is: cyclohexyl–CH=CH–CH=C(CH3)CH2CH3.
IUPAC name: 1-Cyclohexyl-4-methylhexa-1,3-diene (formula C13H22 checked).

Teacher's Note: Join the carbonyl carbons through the missing two-carbon fragment (glyoxal) to rebuild a conjugated diene.

Exam Note: Account for all 13 carbons; glyoxal is the missing piece.

Question 14. Why are conjugated dienes more reactive than alkenes or alkynes towards electrophilic addition reactions?

Solution. The relative reactivity of alkenes, alkynes and conjugated dienes depends upon the stability of the carbocations they generate on addition of an electrophile. Thus, CH2=CH2 + Br+ → CH2+–CH2Br (I); CH≡CH + Br+ → CH+=CHBr (II); CH2=CH–CH=CH2 + Br+ → BrCH2–CH+–CH=CH2 ↔ BrCH2–CH=CH–CH2+ (III).
Amongst the carbocations (I, II and III), the carbocation (III) resulting from buta-1,3-diene is the most stable since it is stabilised by resonance. Out of carbocations (I and II), carbocation (II) resulting from alkyne is less stable since the +ve charge is located on a more electronegative sp2-hybridized carbon. Thus, the stability of carbocations follows the order: III > I > II. Accordingly, the reactivity decreases in the same order, i.e., conjugated diene > alkene > alkyne.

Teacher's Note: Rate follows stability of the intermediate carbocation; allylic resonance stabilises the diene cation.

Exam Note: Give order diene > alkene > alkyne with resonance reason.

Question 15. How will you distinguish between buta-1,3-diene and but-1-yne?

Solution. But-1-yne is a terminal alkyne and hence it can be distinguished from buta-1,3-diene by Tollens' reagent which forms with but-1-yne a white ppt. CH3CH2C≡CH + [Ag(NH3)2]+OH− → CH3CH2C≡CAg (silver but-1-ynide, white ppt.) + 2NH3 + H2O. CH2=CH–CH=CH2 + [Ag(NH3)2]+OH− → No reaction.

Teacher's Note: Terminal –C≡C–H is acidic and forms a silver salt.

Exam Note: State observation: white ppt. versus none.

Question 16. What are the main constituents of LPG?

Solution. The main constituents of LPG are butane and isobutane. Both these isomers can be easily liquefied and hence can be conveniently transported in iron cylinders.

Teacher's Note: LPG is a mixture of C3–C4 alkanes; butane and isobutane are the main ones.

Exam Note: Write butane and isobutane.

Question 17. Out of 2,2,3-trimethylbutane, 2,2,4-trimethylpentane and 2,2,3,3-tetramethylbutane which has the highest octane number? Explain.

Solution. Since the octane number increases as the branching increases. Therefore, 2,2,3,3-tetramethylbutane having four branches has the highest octane number.

Teacher's Note: Octane number rises with branching and compactness.

Exam Note: Count the branches (four) for the answer.

Question 18. Why do the C–C bonds rather than C–H bonds break during cracking of alkanes?

Solution. Since the bond dissociation energy of C–C bonds (355 kJ mol−1) is lower than bond dissociation energy of C–H bonds (414 kJ mol−1), therefore, during cracking of alkanes, C–C bonds break more easily than C–H bonds.

Teacher's Note: Weaker bond breaks first: compare bond dissociation energies.

Exam Note: Quote 355 versus 414 kJ/mol.

Question 19. What is solvent naphtha? What is its use?

Solution. During coal-tar distillation, various fractions can be collected. The fraction distilling between 413–433 K is called solvent naphtha. It mainly contains xylenes and cumenes and is used as a solvent for resins, rubbers, paints etc.

Teacher's Note: Solvent naphtha is a coal-tar fraction, not a petroleum fraction.

Exam Note: Give boiling range 413–433 K and use as solvent.

Very Short Answer Questions (Carrying 1 Mark)

Question VSA-1. Give the IUPAC name of the lowest molecular weight alkane that contains a quaternary carbon.

Solution. 2,2-Dimethylpropane.

Teacher's Note: Smallest alkane with a carbon bonded to four carbons is neopentane.

Exam Note: Write the name only.

Question VSA-2. Write the IUPAC names of the following molecules: (a) CH2=CH–CH(CH3)–CH=CH–CH=CH2 (b) HC≡C–CH(CH3)–CH=CH2 (N.C.E.R.T.)

Solution. (a) 3-Methylhepta-1,4,6-triene. (b) 3-Methylpent-1-en-4-yne. Corrected: the book prints 3-methylpent-1-en-5-yne, which is wrong (a five-carbon chain has the triple bond at C-4).

Teacher's Note: Number so that the double bond gets the lower locant when multiple bonds tie.

Exam Note: Use ‘en’ before ‘yne’ in the name.

Question VSA-3. Draw the structures of the following showing all C and H atoms. (a) 2-Methyl-3-isopropylheptane (b) Dicyclopropylmethane (N.C.E.R.T.)

Solution. (a) CH3–CH(CH3)–CH[CH(CH3)2]–CH2–CH2–CH2–CH3 (2-methyl-3-isopropylheptane).
(b) Two cyclopropyl rings (each a three-membered ring) attached to the same CH2 carbon: (cyclo-C3H5)–CH2–(cyclo-C3H5) (dicyclopropylmethane).

Teacher's Note: Build the heptane chain first, then attach substituents at the stated carbons.

Exam Note: Show every C and H.

Question VSA-4. In the alkane H3C–CH2–C(CH3)2–CH2–CH(CH3)2, identify 1°, 2°, 3° carbon atoms and give the total number of H-atoms bonded to each of these. (N.C.E.R.T.)

Solution. 1° carbons: five CH3 groups; 1° H = 3 + 3 + 3 + 3 + 3 = 15. 2° carbons: two CH2 groups; 2° H = 2 + 2 = 4. 3° carbon: one CH; 3° H = 1. (The C(CH3)2 carbon is 4° and bears no hydrogen.)

Teacher's Note: Classify each carbon by the number of carbons attached to it, then count its H.

Exam Note: Answer 15, 4, 1.

Question VSA-5. Arrange the following in increasing order of their release of energy on combustion. (i)–(iv): four hydrocarbons drawn as skeleton (line) structures in the book (not reproduced here).

Solution. More the number of C-atoms having maximum hydrogens, i.e., CH3 groups, greater is the heat of combustion. Thus the increasing order of heat of combustion is (iii) < (iv) < (i) < (ii).

Teacher's Note: Book answer transcribed; it depends on skeleton drawings.

Exam Note: Count CH3 groups in each structure.

Question VSA-6. Write the structure of all alkenes which on hydrogenation give 2-methylbutane. (N.C.E.R.T.)

Solution. (i) CH2=C(CH3)–CH2CH3 (2-methylbut-1-ene) (ii) CH3–C(CH3)=CH–CH3 (2-methylbut-2-ene) (iii) (CH3)2CH–CH=CH2 (3-methylbut-1-ene).

Teacher's Note: Put a double bond at every possible position in the 2-methylbutane skeleton.

Exam Note: Three alkenes expected.

Question VSA-7. Which of the following polymerises most readily? (i) Acetylene (ii) Ethene (iii) Buta-1,3-diene (N.C.E.R.T.)

Solution. Buta-1,3-diene being more reactive undergoes polymerisation readily. The actual order is: buta-1,3-diene > ethene > acetylene.

Teacher's Note: Conjugated diene forms the most stable intermediate, so reacts fastest.

Exam Note: Quote order diene > ethene > acetylene.

Question VSA-8. Arrange the following set of compounds in order of their decreasing relative reactivity with an electrophile, E+. (i) Chlorobenzene, 2,4-dinitrochlorobenzene, p-nitrochlorobenzene (ii) toluene, p-H3C–C6H4–CH3, p-H3C–C6H4–NO2, p-O2N–C6H4–NO2 (N.C.E.R.T.)

Solution. Electron-donating groups increase the reactivity while electron-withdrawing groups decrease the reactivity. Thus, (i) chlorobenzene > p-nitrochlorobenzene > 2,4-dinitrochlorobenzene. (ii) p-CH3–C6H4–CH3 > toluene > p-H3C–C6H4–NO2 > p-O2N–C6H4–NO2.

Teacher's Note: Rank by net electron density on the ring: CH3 donates, NO2 withdraws.

Exam Note: Count donor and acceptor groups.

Question VSA-9. Indicate the primary, secondary, tertiary and quaternary carbon atoms in the following: (i) 3-Ethyl-2-methylhexane (ii) 2,2,4-Trimethylpentane.

Solution. (i) CH3–CH(CH3)–CH(CH2CH3)–CH2–CH2–CH3: primary (1°) = 4 (C-1, the methyl on C-2, the ethyl CH3, C-6); secondary (2°) = 3 (ethyl CH2, C-4, C-5); tertiary (3°) = 2 (C-2, C-3); no quaternary carbon.
(ii) CH3–C(CH3)2–CH2–CH(CH3)–CH3: primary = 5 (all CH3); secondary = 1 (C-3); tertiary = 1 (C-4); quaternary (4°) = 1 (C-2). (Book labels these on drawn structures; counts here verified from the formulae.)

Teacher's Note: A carbon is 1°, 2°, 3° or 4° by the number of other carbons bonded to it.

Exam Note: Label each carbon on the drawn structure.

Question VSA-10. Name the chain isomer of C5H12 which has a tertiary hydrogen atom.

Solution. 2-Methylbutane, (CH3)2CH–CH2–CH3.

Teacher's Note: Tertiary H sits on a carbon bonded to three carbons; only isopentane qualifies.

Exam Note: Name it and draw it.

Question VSA-11. What type of isomerism is shown by butane and isobutane?

Solution. Chain or nuclear isomerism.

Teacher's Note: Same formula C4H10, different carbon skeleton.

Exam Note: Write chain isomerism.

Question VSA-12. Why is cyclopropane very reactive as compared to cyclohexane?

Solution. In cyclopropane, the ring is quite strained since the C–C–C bond angles are only 60° as compared to 109° 28′ in cyclohexane.

Teacher's Note: Angle strain makes the cyclopropane ring open easily.

Exam Note: Cite 60° versus 109°28′.

Question VSA-13. Which of the following shows geometrical isomerism? (i) CHCl=CHCl (ii) CH2=CCl2 (iii) CCl2=CHCl. Give the structures of its cis and trans forms.

Solution. Only (i) i.e. ClCH=CHCl has two different substituents on each carbon atom of the double bond and hence shows geometrical isomerism. The other two compounds, i.e. (ii) and (iii) do not show geometrical isomerism because one of the carbon atoms of the double bond in each case has two identical atoms, i.e. Cl atoms.
cis-1,2-Dichloroethene: both Cl atoms on the same side of C=C. trans-1,2-Dichloroethene: the Cl atoms on opposite sides.

Teacher's Note: Each double-bond carbon needs two different substituents for cis-trans isomerism.

Exam Note: Answer (i) with both structures.

Question VSA-14. How many structural and geometrical isomers are possible for a cyclohexane derivative having the molecular formula, C8H16?

Solution. Five structural isomers: ethylcyclohexane, 1,1-; 1,2-; 1,3- and 1,4-dimethylcyclohexanes. Six geometrical isomers since each of 1,2-; 1,3- and 1,4-dimethylcyclohexanes has two geometrical (cis and trans) isomers.

Teacher's Note: Enumerate substituent patterns on the ring; 1,1 cannot be cis-trans.

Exam Note: Answer 5 structural, 6 geometrical.

Question VSA-15. What type of hybridization is involved in (i) planar and (ii) linear molecules?

Solution. (i) sp2 and (ii) sp.

Teacher's Note: sp2 gives 120° trigonal planar; sp gives 180° linear.

Exam Note: Write sp2 and sp.

Question VSA-16. Write all the possible isomers for a benzene derivative having the molecular formula C8H10.

Solution. Four isomers; ethylbenzene, o-xylene, m-xylene and p-xylene. For structures refer to the text.

Teacher's Note: Either one ethyl group or two methyl groups (o, m, p).

Exam Note: List four isomers.

Question VSA-17. How will you separate propene from propyne? (N.C.E.R.T.)

Solution. By passing the mixture through ammoniacal AgNO3 solution or ammoniacal CuCl solution when propyne reacts while propene passes over.

Teacher's Note: Terminal alkyne forms a metal acetylide precipitate; alkene does not.

Exam Note: Name Tollens' reagent or ammoniacal CuCl.

Question VSA-18. A compound is formed by the substitution of two chlorine atoms for two hydrogen atoms in propane. What is the number of structural isomers possible? (B.I.T. Ranchi, 1992)

Solution. Four: 1,1-dichloropropane (CH3CH2CHCl2), 2,2-dichloropropane (CH3CCl2CH3), 1,2-dichloropropane (CH3CHClCH2Cl) and 1,3-dichloropropane (ClCH2CH2CH2Cl).

Teacher's Note: Place two Cl on the same carbon (C-1 or C-2) or on different carbons.

Exam Note: Answer 4 and list them.

Question VSA-19. Give the structure of an optically active hydrocarbon (C6H12) which on catalytic hydrogenation gives an optically inactive compound (C6H14). (I.I.T. 1993)

Solution. 3-Methylpent-1-ene, CH2=CH–C*H(CH3)–CH2CH3 (optically active) → (H2/Ni) CH3CH2–CH(CH3)–CH2CH3 (3-methylpentane, optically inactive).

Teacher's Note: Chiral carbon becomes achiral when vinyl turns into ethyl.

Exam Note: Show before and after hydrogenation.

Question VSA-20. Arrange the following in the increasing order of C–C bond length: C2H6, C2H4, C2H2 (I.I.T. Ranchi 1994)

Solution. C2H2 < C2H4 < C2H6.

Teacher's Note: Higher bond order means shorter bond.

Exam Note: Triple < double < single.

Question VSA-21. Name two industrial sources of hydrocarbons.

Solution. Coal and petroleum.

Teacher's Note: Coal tar and crude oil are the two main sources.

Exam Note: Name both.

Question VSA-22. What does LPG stand for?

Solution. Liquefied petroleum gas.

Teacher's Note: LPG is compressed C3–C4 alkanes.

Exam Note: Expand the abbreviation.

Question VSA-23. What type of hydrocarbons are present in high octane gasoline?

Solution. Branched chain aliphatic and/or aromatic hydrocarbons.

Teacher's Note: Branching and aromatic rings raise octane number.

Exam Note: Write branched and aromatic.

Question VSA-24. What are the chief constituents of light oil fraction?

Solution. Benzene, toluene and xylenes.

Teacher's Note: Light oil from coal tar contains these aromatics.

Exam Note: Name all three.

Question VSA-25. Name the products formed when an ethereal solution containing ethyl iodide and methyl iodide is heated with sodium metal.

Solution. A mixture of ethane, propane and butane is formed.

Teacher's Note: Wurtz reaction with two halides gives three alkanes.

Exam Note: Name all three products.

Question VSA-26. Out of ethylene and acetylene which is more acidic and why?

Solution. Acetylene, due to greater electronegativity of the sp-hybridized carbon.

Teacher's Note: More s-character holds the C–H electrons closer, so H+ leaves more easily.

Exam Note: Mention 50% s-character.

Question VSA-27. What is Lindlar's catalyst? What is it used for?

Solution. Pd deposited over CaCO3 or BaSO4 and partially poisoned by addition of lead acetate or sulphur or quinoline. It is used for partial reduction of alkynes to cis-alkenes.

Teacher's Note: The poison stops hydrogenation at the alkene stage.

Exam Note: State composition and cis product.

Question VSA-28. Define cracking.

Solution. The thermal decomposition of higher hydrocarbons into lower hydrocarbons in presence or absence of a catalyst is called cracking.

Teacher's Note: Cracking breaks C–C bonds in large molecules.

Exam Note: Give a one-line definition.

Question VSA-29. What scale is used for measuring the quality of gasoline?

Solution. Octane number.

Teacher's Note: Scale runs from 0 (n-heptane) to 100 (iso-octane).

Exam Note: Write octane number.

Question VSA-30. Write the structure of the alkene which on reductive ozonolysis gives butanone and ethanal.

Solution. CH3CH2C(CH3)=CHCH3 (3-methyl-2-pentene).

Teacher's Note: Join the carbonyl carbons of both products with a double bond.

Exam Note: Write structure and name.

Question VSA-31. What is teflon? What is it used for?

Solution. Poly(tetrafluoroethylene) is called teflon. It is used for making non-stick utensils.

Teacher's Note: Teflon is the polymer of F2C=CF2.

Exam Note: Name the polymer and one use.

Question VSA-32. Name two reagents which can be used to distinguish between ethene and ethyne.

Solution. Tollens' reagent and ammoniacal CuCl solution.

Teacher's Note: Terminal alkyne gives a precipitate; ethene does not.

Exam Note: Name two reagents.

Question VSA-33. How can ethylene be converted into ethane? (B.I.T. Ranchi 1990)

Solution. By catalytic reduction with H2 in presence of nickel at 523–573 K.

Teacher's Note: This is Sabatier-Senderens reduction.

Exam Note: Give H2, Ni, temperature.

Question VSA-34. How will you detect the presence of unsaturation in an organic compound? (M.L.N.R. Allahabad 1990)

Solution. Either by Baeyer's reagent or by Br2 in CCl4.

Teacher's Note: Decolourisation signals C=C or C≡C.

Exam Note: State the observation.

Question VSA-35. Explain the term knocking. A sample of petrol produces the same knocking properties as the mixture containing 30% n-heptane and 70% iso-octane. What is the octane number of the sample? (I.S.M. Dhanbad 1990)

Solution. 70. (Octane number = percentage of iso-octane in the matching mixture.)

Teacher's Note: Octane number equals the percentage of iso-octane in the matching mixture.

Exam Note: Answer 70.

Question VSA-36. Write the structural formulae of all the possible isomers of C2H2Cl2 and indicate which of them is non-polar. (M.L.N.R. Allahabad 1992)

Solution. (i) cis-1,2-dichloroethene (Cl atoms same side) (ii) trans-1,2-dichloroethene (Cl atoms opposite sides) and (iii) 1,1-dichloroethene (CH2=CCl2). (ii) is non-polar.

Teacher's Note: The trans isomer has bond dipoles cancelling.

Exam Note: Three isomers; trans is non-polar.

Question VSA-37. Use Markownikov's rule to predict the product of the following reactions: (i) HCl with CH3CCl=CH2 and (ii) HCl with CH3CH=C(CH3)2. (I.S.M. Dhanbad 1992)

Solution. CH3CCl=CH2 + HCl → CH3CCl2CH3; CH3CH=C(CH3)2 + HCl → CH3CH2–CCl(CH3)2.

Teacher's Note: H adds to the carbon with more hydrogens.

Exam Note: State rule and give products.

Question VSA-38. Arrange the following in order of increasing volatility: gasoline, kerosene and diesel. (B.I.T. Ranchi 1992)

Solution. Diesel, kerosene, gasoline.

Teacher's Note: Lower boiling fractions are more volatile.

Exam Note: Write diesel < kerosene < gasoline.

Question VSA-39. Arrange the following: HCl, HBr, HI, HF in order of decreasing reactivity towards alkenes. (M.L.N.R. Allahabad 1993)

Solution. HI > HBr > HCl > HF.

Teacher's Note: Weaker H–X bond means faster addition.

Exam Note: Order follows bond strength.

Question VSA-40. Give the structure of the alkene (C4H8) which adds on HBr in the presence and in the absence of peroxide to give the same product, C4H9Br. (I.I.T. 1991)

Solution. 2-Butene (being symmetrical gives the same product i.e., 2-bromobutane).

Teacher's Note: Symmetrical alkene makes Markownikov and anti-Markownikov products identical.

Exam Note: Name 2-butene.

Question VSA-41. Give the structure of an alkene (C4H8) which when treated with H2O/H2SO4 gives C4H10O which cannot be resolved into optical isomers.

Solution. 2-Methylpropene or isobutylene on hydration gives t-butyl alcohol which is optically inactive. The other two butenes, i.e., 1-butene and 2-butene will give 2-butanol which can be resolved.

Teacher's Note: tert-Butyl alcohol has no chiral carbon.

Exam Note: Name 2-methylpropene.

Question VSA-42. Although benzene is highly unsaturated, it does not undergo addition reactions. (M.L.N.R. Allahabad 1995)

Solution. Because of extra stability due to delocalization of π-electrons, the double bonds of benzene usually do not undergo addition reactions.

Teacher's Note: Delocalisation (resonance) energy is lost on addition.

Exam Note: Mention delocalised π-electrons.

Question VSA-43. How will you demonstrate that double bonds of benzene are somewhat different from that of olefins? (West Bengal J.E.E. 2004)

Solution. The double bonds of olefins decolourize Br2 in CCl4 and discharge the pink colour of Baeyer's reagent with simultaneous formation of a brown ppt. of MnO2 while those of benzene do not.

Teacher's Note: Benzene gives negative bromine and Baeyer tests.

Exam Note: Give both tests with observations.

Question VSA-44. Which one of the following has the maximum number of π-bonds: propyne, butadiene, benzene? (West Bengal J.E.E. 2004)

Solution. Benzene has three π-bonds while propyne and butadiene both have two each.

Teacher's Note: Count double bonds (one π) and triple bonds (two π).

Exam Note: Answer benzene (3 π-bonds).

Download Pradeep's KL Gogia Solutions for Class 11 Math PDF

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 15 Hydrocarbons Part 3

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 15 Hydrocarbons Part 3 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Explore More Study Resources for Class 11 Math

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.