Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Chemistry Chapter 14 Organic Chemistry Some Basic Principles
Review structured textbook solutions for Class 11 Chemistry Chapter 14 Organic Chemistry Some Basic Principles prepared by Pradeep's KL Gogia. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 14 Organic Chemistry Some Basic Principles Textbook Solutions PDF
Access the complete solution PDF for Class 11 Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Organic Chemistry Some Basic Principles - Part 3 (pages 63-92)
Conceptual Questions
Question Conceptual Q.1. Write the name of the substituent present in the following compounds: (i) a benzene ring carrying a Cl atom and, on the adjacent carbon, the chain CH(CH3)CH2COOH; (ii) (HOCH2CH2O)2CHCOOH.
Solution. (i) 2-Chlorophenyl (the ring with Cl at position 2 is the substituent on the butanoic acid chain). (ii) Bis(2-hydroxyethoxy), i.e. two HOCH2CH2O– groups on C-2 of the acetic acid. Corrected: the book prints the name as “Bis(2-hydroxyethyl)”; the groups are attached through oxygen, so the substituent name is bis(2-hydroxyethoxy).
Teacher's Note: Number the substituent from its point of attachment; an O link makes it an -oxy group.
Exam Note: Ring substituent: number from attachment point.
Question Conceptual Q.2. Which bond is more polar in the following pairs of molecules: (a) H3C–H, H3C–Br (b) H3C–NH2, H3C–OH (c) H3C–OH, H3C–SH
Solution. (a) C–Br, since Br is more electronegative than H. (b) C–O, since O is more electronegative than N. (c) C–O, since O is more electronegative than S.
Teacher's Note: Bond polarity grows with the electronegativity difference between the bonded atoms.
Exam Note: Compare electronegativity differences; state them.
Question Conceptual Q.3. In which C–C bond of CH3CH2CH2Br is the inductive effect expected to be the least?
Solution. The magnitude of the inductive effect decreases with distance, so the effect is least in the C2–C3 bond (numbering C-1 as the carbon bearing Br, C-3 as the CH3).
Teacher's Note: The -I effect of Br fades along the chain; the bond farthest from Br feels it least.
Exam Note: Inductive effect falls rapidly with distance.
Question Conceptual Q.4. Write resonance structures of (a) CH3COO− and (b) C6H5NH2. Show the movement of electrons by curved arrows.
Solution. (a) CH3–C(=O)–O− ↔ CH3–C(–O−)=O: the negative charge is shared equally by the two oxygen atoms (curved arrow from the O− lone pair to form C=O, and the C=O π pair moving onto the other O). (b) Aniline: the lone pair on N is delocalised into the ring, giving structures with N+H2=C (double bond between N and ring carbon) and a negative charge on the ortho, para, ortho positions in turn, plus the two Kekulé structures: [C6H5–NH2] ↔ [N+H2=C ring, C− at ortho] ↔ [C− at para] ↔ [C− at the other ortho].
Teacher's Note: Resonance moves only electrons, never atoms; in aniline the N lone pair pushes negative charge to ortho/para carbons.
Exam Note: Draw curved arrows from lone pair; show all contributors.
Question Conceptual Q.5. Which of the following pairs of structures do not constitute resonance structures? (a) CH3–N+(=O)O− and CH3–O–N=O (b) CH3–C(=O)–CH2− and CH3–C(O−)=CH2 (c) (CH3)2CO and CH3–C(OH)=CH2 (d) CH3CH=CHCH3 and CH3CH2CH=CH2
Solution. (a) Not resonance structures: the position of atoms differs (nitromethane and methyl nitrite are functional isomers). (b) These ARE resonance structures; they differ only in the position of electrons. (c) Not resonance structures: they differ in the position of atoms (a pair of tautomers, keto and enol). (d) Not resonance structures: they differ in the position of atoms (position isomers of butene). So (a), (c) and (d) are not resonance structures.
Teacher's Note: Resonance forms keep all atoms fixed; any shift of an atom or H means isomers or tautomers.
Exam Note: Test: do atom positions change? If yes, not resonance.
Question Conceptual Q.6. Write the resonance structures of CH2=CH–CHO and arrange them in order of decreasing stability.
Solution. I: CH2=CH–CH=O; II: +CH2–CH=CH–O−; III: −:CH2–CH=CH–O+ (O with a sextet/charge as printed). Structure I is most stable, since every C and O atom has an octet and none carries a charge. Structures II and III involve charge separation, so both are less stable than I. II is more stable than III since in II the −ve charge is on the more electronegative O atom and the +ve charge is on the less electronegative C atom, whereas in III the more electronegative O carries the +ve charge and the less electronegative C carries the −ve charge. Decreasing stability: I > II > III.
Teacher's Note: Stability: complete octets, no charge separation, then negative charge on the more electronegative atom.
Exam Note: Order: neutral octet form, then charge on right atom.
Question Conceptual Q.7. Give reasons why the following two structures (I and II) cannot be the major contributors to the real structure of CH3COOCH3: (I) CH3–C(O−)(–O+–CH3) (written with O− on the carbonyl carbon and O+ in the ether oxygen); (II) CH3–C+(O−)–O–CH3 (C with a sextet).
Solution. Both these structures involve separation of charge and hence are of high energy. Therefore they do not contribute substantially towards the resonance hybrid. Further, the contribution of structure I is lower than that of structure II since in II the C atom has only a sextet of electrons.
Teacher's Note: Charge-separated contributors with incomplete octets are high in energy and so contribute little to the hybrid.
Exam Note: Cite charge separation and incomplete octet.
Question Conceptual Q.8. Using curved arrow notation, show the formation of reactive intermediates when the following covalent bonds undergo heterolytic cleavage: (a) CH3–SCH3 (b) CH3–CN (c) CH3–Cu
Solution. (a) Although C and S have about the same electronegativity, the cleavage of C–S occurs towards S because S, being bigger in size, can disperse the −ve charge more effectively: CH3–SCH3 → CH3+ + −SCH3. (b) CH3–CN → CH3+ + −CN (since CN is more electronegative than CH3). (c) CH3–Cu → −:CH3 + Cu+ (since Cu is more electropositive than C). The curved arrow starts at the bond and points to the more electronegative atom/group.
Teacher's Note: In heterolysis the bonding pair goes to the more electronegative (or better charge-dispersing) part.
Exam Note: Arrow from bond to the atom taking the pair.
Question Conceptual Q.9. Giving proper justification, categorise the following molecules/ions as nucleophile or electrophile: HS−, BF3, C2H5O−, (CH3)3N:, Cl+, CH3–C+=O, H2N:−, NO2+.
Solution. (i) Nucleophiles: HS−, C2H5O−, (CH3)3N:, H2N:−. These species have one or more lone pairs of electrons which they can easily donate to an electrophile and hence behave as nucleophiles. (ii) Electrophiles: BF3, Cl+, CH3–C+=O, NO2+. All the positively charged species have a sextet of electrons around the +ve centres and hence can accept a pair of electrons and thus behave as electrophiles. Similarly B has only a sextet of electrons in BF3, which, though neutral, also acts as an electrophile.
Teacher's Note: Lone pair to donate means nucleophile; electron-deficient centre (sextet) means electrophile.
Exam Note: Always justify with lone pair or sextet.
Question Conceptual Q.10. Identify the electrophilic centres in the following: CH2=C=O, CH3CN, CH3I.
Solution. (a) CH2=C=O ↔ CH2−–C+=O: as a result of resonance, the carbonyl (central) carbon carries a +ve charge and is an electrophilic centre. (b) CH3–C≡N ↔ CH3–C+=N−: the nitrile carbon is the electrophilic centre. (c) CH3–I: I, being much bigger in size than C, can disperse the negative charge more easily; therefore the CH3 carbon carries a partial +ve charge (δ+) and is the electrophilic centre.
Teacher's Note: Resonance or a polar bond leaves a carbon positively polarised; that carbon is attacked by nucleophiles.
Exam Note: Name the carbon atom, give the reason.
Question Conceptual Q.11. What is the relationship between the members of the following pairs of structures? Are they identical, structural or geometrical isomers, or resonance contributors? (a) two ketone skeletal structures with the C=O group at different positions in the carbon chain (b) ClCH=CHCH2Cl with H and Cl arranged as shown, and the same compound drawn with the groups interchanged (c) H–C(=O)–OH2+-type pair: H–C(OH)=O with +OH and H–C(OH)=+OH (d) D and H on a C=C, in cis and trans arrangements.
Solution. (a) Structural isomers (actually position isomers, as well as metamers). (b) Identical, because the relationship between the H atoms or Cl and CH2Cl remains to be trans in both the structures. (c) Resonance contributors, since these differ in the position of electrons but not atoms. (d) Geometrical isomers.
Teacher's Note: Identical, positional, geometrical, resonance: ask whether atoms or only electrons move, and check cis/trans.
Exam Note: Decide: same connectivity? same atom positions? cis/trans?
Question Conceptual Q.12. Classify the following transformations according to the reaction type: (a) H3C–CH=CH–CH3 + Br2 → H3C–CHBr–CHBr–CH3 (b) (CH3)2C=C(CH3)2 + Br2 → (CH3)2C=C(CH3)CH2Br + HBr (c) H2C=CH–CH2CH3 → H3C–CH=CH–CH3 (d) C6H5CHO + CH3COCH3 → C6H5CH(OH)CH2COCH3 (e) (CH3)3CCl + HO− → (CH3)2C=CH2 (f) CH3–C(=N–OH)–Ph + H3O+ → CH3–C(=O)–NHPh
Solution. (a) Electrophilic addition. (b) Free radical substitution. (c) Isomerisation. (d) Condensation. (e) β-Elimination reaction. (f) Rearrangement.
Teacher's Note: Identify what happens to the bonds: added, replaced, lost, moved or joined.
Exam Note: Name type with one-word justification.
Very Short Answer Questions (Carrying 1 Mark)
Question VSA Q.1. What type of hybridization is involved in (i) planar and (ii) linear molecules?
Solution. (i) sp2 (ii) sp.
Teacher's Note: sp2 gives 120° planar geometry; sp gives 180° linear geometry.
Exam Note: Link hybridisation to geometry.
Question VSA Q.2. What are isomers?
Solution. Compounds having the same molecular formula but different chemical and physical properties are called isomers.
Teacher's Note: Same molecular formula is the defining feature; the difference lies in structure.
Exam Note: Define with same formula, different properties.
Question VSA Q.3. What type of isomerism is shown by butane and isobutane?
Solution. Chain or nuclear isomerism.
Teacher's Note: Both are C4H10: one straight chain, one branched.
Exam Note: Chain isomerism: same formula, different carbon skeleton.
Question VSA Q.4. Write the tautomer of acetaldehyde and write its IUPAC name?
Solution. CH2=CHOH, eth-1-en-1-ol.
Teacher's Note: Keto-enol tautomerism shifts an α-H to oxygen and creates a C=C.
Exam Note: Enol form: name ends -en-ol.
Question VSA Q.5. Write the metamer of diethyl ether. What is its IUPAC name?
Solution. 1-Methoxypropane, CH3OCH2CH2CH3 or 2-methoxypropane, CH3–OCH(CH3)2.
Teacher's Note: Metamers share the functional group but differ in alkyl groups on either side of it.
Exam Note: Keep C4H10O ether; vary the alkyl groups.
Question VSA Q.6. Give one example of functional isomerism.
Solution. CH3CH2OH and CH3OCH3.
Teacher's Note: Same formula C2H6O, but alcohol versus ether functional group.
Exam Note: Pick a pair with the same formula.
Question VSA Q.7. Write the aci-form of nitromethane.
Solution. CH2=N(O−)OH (CH2=N+(O−)–OH).
Teacher's Note: The aci-form arises when an α-H of the nitroalkane moves to oxygen (tautomerism).
Exam Note: Draw N with O− and OH.
Question VSA Q.8. Draw the structure of the tautomer of phenol and write its IUPAC name.
Solution. Cyclohexa-2,4-dien-1-one (the keto form of phenol).
Teacher's Note: Phenol→keto tautomer has a ring C=O with two C=C bonds.
Exam Note: Keto form: name ends -one.
Question VSA Q.9. A compound is formed by the substitution of two chlorine atoms for two hydrogen atoms in propane. What is the number of structural isomers possible? (B.I.T. Ranchi 1992)
Solution. Four: 1,1-dichloropropane (CH3CH2CHCl2), 1,2-dichloropropane (CH3CHClCH2Cl), 2,2-dichloropropane (CH3CCl2CH3) and 1,3-dichloropropane (ClCH2CH2CH2Cl).
Teacher's Note: Place two Cl on C-1/C-1, C-1/C-2, C-2/C-2, C-1/C-3 and count distinct isomers.
Exam Note: Answer 4; list all four.
Question VSA Q.10. Arrange the following in increasing order of C–C bond length: C2H6, C2H4, C2H2. (B.I.T. Ranchi 1994)
Solution. C2H2 < C2H4 < C2H6.
Teacher's Note: More bond order (triple > double > single) means a shorter C–C bond.
Exam Note: Bond length falls as bond order rises.
Question VSA Q.11. What is a functional group?
Solution. The atom or group of atoms present in a molecule which largely determines its chemical properties is called the functional group.
Teacher's Note: The functional group decides the characteristic reactions of a compound family.
Exam Note: Quote the definition with example.
Question VSA Q.12. What is the functional group of (i) an aldehyde and (ii) a nitro compound? (B.I.T. Ranchi 1991)
Solution. (i) –CHO (ii) –NO2.
Teacher's Note: Aldehyde group is a carbonyl with H; nitro is N attached to two O.
Exam Note: Write formula of each group.
Question VSA Q.13. Define homologous series.
Solution. Refer to the text.
Teacher's Note: A homologous series is a family differing by CH2 with the same functional group.
Exam Note: Mention CH2 difference, same group.
Question VSA Q.14. What are primary and secondary suffixes as applied to IUPAC nomenclature?
Solution. The primary suffix indicates whether the carbon chain is saturated or unsaturated while the secondary suffix indicates the functional group present in the molecule.
Teacher's Note: Example: in propanol, -an- is primary and -ol is secondary.
Exam Note: Give example like propan-1-ol.
Question VSA Q.15. Name the alkyl groups derived from isobutane.
Solution. (i) (CH3)2CHCH2– (isobutyl) and (ii) (CH3)3C– (t-butyl).
Teacher's Note: Removing H from CH3 of isobutane gives isobutyl; from the CH carbon gives t-butyl.
Exam Note: Two groups: isobutyl and tert-butyl.
Question VSA Q.16. Give the IUPAC name of the compound: CH2=CH–CH(CH3)2 (B.I.T. Ranchi 1992)
Solution. 3-Methylbut-1-ene.
Teacher's Note: Longest chain with C=C gets lowest locant; the methyl sits on C-3.
Exam Note: Locate double bond first.
Question VSA Q.17. Select electrophiles out of the following: H+, Na+, Cl−, C2H5OH, AlCl3, SO3, CN−, CH3CH2+, :CCl2, R–X
Solution. H+, Na+, AlCl3, SO3, CH3CH2+, :CCl2, R–X.
Teacher's Note: Electron-deficient species and positive ions accept electron pairs.
Exam Note: Cations and electron-deficient molecules.
Question VSA Q.18. Select nucleophiles from the following: BF3, NH3, OH−, R–X, C2H5OH.
Solution. NH3, OH−, C2H5OH (each has a lone pair of electrons to donate).
Teacher's Note: NH3, OH− and ROH have lone pairs; BF3 is electron-deficient; RX is polarised at carbon.
Exam Note: Nucleophile means donor of a lone pair.
Question VSA Q.19. Arrange the following: (i) –NO2, –COOH, –F, –CN, –I in increasing order of –I effect. (ii) CH3–, D–, (CH3)3C–, (CH3)2CH–, CH3CH2– in decreasing order of +I effect.
Solution. (i) –NO2 > –CN > –COOH > –F > –I (as printed, listed in the order given in the book answer; this ranks the groups by decreasing –I strength). (ii) (CH3)3C– > (CH3)2CH– > CH3CH2– > CH3– > D–.
Teacher's Note: (ii) +I effect grows with the number of alkyl groups; deuterium is slightly more electron-releasing than H, but least here.
Exam Note: Note the direction: increasing vs decreasing.
Question VSA Q.20. Arrange the following: (i) C6H5ċHCH3, C6H5CH·–CH=CH2, C6H5CH2CH2·, C6H5C·(CH3)2 in order of increasing stability. (ii) CH3CH2+, C6H5CH2+, (CH3)3C+, CH2=CHCH2+ in order of decreasing stability. (iii) HC≡C−, CH2=CH−, CH3CH2−, CH3−, (CH3)2CH−, C6H5CH2− in order of increasing stability.
Solution. (i) C6H5CH2CH2· < C6H5ċHCH3 < C6H5C·(CH3)2 < C6H5CH·–CH=CH2. (ii) (CH3)3C+ > C6H5CH2+ > CH2=CHCH2+ > CH3CH2+. (iii) (CH3)2CH− < CH3CH2− < CH3− < CH2=CH− < C6H5CH2− < HC≡C−.
Teacher's Note: Resonance and alkyl groups stabilise radicals/cations; carbanion stability rises with s-character and falls with alkyl groups.
Exam Note: Read the direction asked; use +I, resonance, s-character.
Question VSA Q.21. Which is expected to be more stable, O2NCH2CH2O− or CH3CH2O− and why? (N.C.E.R.T.)
Solution. O2N←CH2←CH2←O− is more stable than CH3→CH2→O− because the NO2 group has a –I effect and hence it tends to disperse the −ve charge on the O atom. In contrast, CH3CH2 has a +I effect. It therefore tends to intensify the −ve charge and hence destabilises it.
Teacher's Note: An electron-withdrawing group spreads out negative charge, stabilising the anion; an alkyl group intensifies it.
Exam Note: Link -I to charge dispersal and stability.
Short Answer Questions (Carrying 2 or 3 Marks)
Question Short Q.13. An alkane has a molecular mass of 72. Give all the possible structural isomers along with their IUPAC names. Hint: the general formula of alkanes is CnH2n+2.
Solution. 12n + (2n + 2) = 72, so 14n = 70 and n = 5. Thus the molecular formula of the alkane is C5H12. (The book refers to the text for the isomers; they are: CH3CH2CH2CH2CH3, pentane; (CH3)2CHCH2CH3, 2-methylbutane; (CH3)4C, 2,2-dimethylpropane.)
Teacher's Note: Find n from the molar mass, then draw the chain, one-methyl-branched and two-methyl-branched forms.
Exam Note: Three isomers of C5H12; name each.
Question Short Q.14. A hydrocarbon has the molecular mass 70. Write all the possible structural isomers and give their IUPAC names.
Solution. The hydrocarbon having molecular mass 70 is C5H10. It exists in the following four structural isomers: (i) CH3CH2CH2CH=CH2 (pent-1-ene); (ii) (CH3)2CH–CH=CH2 (3-methylbut-1-ene); (iii) CH3CH2CH=CHCH3 (pent-2-ene) and (iv) (CH3)2C=CHCH3 (2-methylbut-2-ene).
Teacher's Note: CnH2n with n = 5 (5 × 12 + 10 = 70) is an alkene (or cycloalkane).
Exam Note: Formula C5H10; list the alkenes with names.
Question Short Q.16. What is a functional group? Write the functional groups of the following: (i) Thioalcohol (ii) Isothiocyanate (iii) Thiocyanate and (iv) Sulphonic acid (v) Sulphones (vi) Sulphoxides.
Solution. A functional group is the atom or group of atoms in a molecule that largely determines its chemical properties. (i) –SH (ii) –N=C=S (iii) –S–C≡N (iv) –SO3H (v) sulphone: >S(=O)=O, i.e. S joined to two carbon groups and double-bonded to two O atoms (vi) sulphoxide: >S=O. Corrected: the book prints the (v) and (vi) formulae the other way round (sulphone shown with one S=O, sulphoxide with two); a sulphone has two S=O bonds and a sulphoxide has one.
Teacher's Note: Thio- means S replaces O; iso- thiocyanate attaches through N, thiocyanate through S.
Exam Note: Sulphone R2SO2; sulphoxide R2SO.
Short Answer Questions (continued): IUPAC Naming
Question Short Q.23 (i). Give the IUPAC name of the compound: CH2=CH–CH(CH2CH3)–C(Cl)=CH2 (A.I.S.B. 1993)
Solution. 2-Chloro-3-ethylpenta-1,4-diene
Teacher's Note: Longest chain must contain both C=C; substituents are alphabetical.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (ii). Give the IUPAC name of the compound: CH3–CH2–C(CH3)(Br)–CH(Br)–CH2Cl (A.I.S.B. 1994)
Solution. 2,3-Dibromo-1-chloro-3-methylpentane
Teacher's Note: Halo groups are prefixes only; number to give the lowest locant set.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (iii). Give the IUPAC name of the compound: CH3–C(F)(C2H5)–CH2–C(Cl)(C2H5)–CH3 (A.I.S.B. 1995)
Solution. 3-Chloro-5-fluoro-3,5-dimethylheptane
Teacher's Note: Ethyl on the chain extends it to heptane; alphabetical order cites chloro before fluoro.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (iv). Give the IUPAC name of the compound: CH3–C(NO2)(C2H5)–CH2–C(Br)(C2H5)–CH3 (A.I.S.B. 1995)
Solution. 3-Bromo-3,5-dimethyl-5-nitroheptane
Teacher's Note: Nitro is only a prefix; alphabetical order: bromo, methyl, nitro.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (v). Give the IUPAC name of the compound: CH3–CH(Br)–C(=O)–CH(CH3)–CH3 (D.S.B. 1996)
Solution. 2-Bromo-4-methylpentan-3-one
Teacher's Note: Ketone gets the lowest locant; its suffix -one takes priority over halo.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (vi). Give the IUPAC name of the compound: CH3–CH(NO2)–C(=O)–CH(CH3)–CH3 (A.I.S.B. 1996)
Solution. 4-Methyl-2-nitropentan-3-one
Teacher's Note: Carbonyl is the principal group; nitro and methyl are prefixes.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (vii). Give the IUPAC name of the compound: CH3–CH(OCH3)–C(=O)–CH(CH3)–OCH2CH3 (A.I.S.B. 1996)
Solution. 2-Ethoxy-4-methoxypentan-3-one
Teacher's Note: Alkoxy groups are prefixes and cited alphabetically: ethoxy before methoxy.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (viii). Give the IUPAC name of the compound: CH3–CH(NO2)–C(=O)–CH(CH3)–Br (A.I.S.B. 1996)
Solution. 2-Bromo-4-nitropentan-3-one
Teacher's Note: Tie in locants is broken by alphabetical order: bromo gets the lower number.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (ix). Give the IUPAC name of the compound: CH3CH=CHCH2NH2 (A.I.S.B. 1997)
Solution. But-2-en-1-amine
Teacher's Note: Amine carbon is C-1, then the double bond gets locant 2.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (x). Give the IUPAC name of the compound: CH2=CHCN (A.I.S.B. 1997)
Solution. Prop-2-enenitrile
Teacher's Note: The nitrile carbon counts in the chain and is C-1.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xi). Give the IUPAC name of the compound: CH3CH2CH(CHO)CH2COOH (A.I.S.B. 2001)
Solution. 3-Ethyl-4-oxobutanoic acid (as printed). Corrected: choosing the longest chain through the COOH group gives 3-formylpentanoic acid.
Teacher's Note: COOH takes priority, but the chosen chain must also be the longest one.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xii). Give the IUPAC name of the compound: ON–C6H4–N(CH3)2 (para) (D.S.B. 2001)
Solution. 4-Nitroso-N,N-dimethylaniline
Teacher's Note: Aniline is the parent; N-substituents take N locants.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xiii). Give the IUPAC name of the compound: CH3–CH(CONH2)–CH2–CH3 (H.S.B. 2002)
Solution. 2-Methylbutanamide
Teacher's Note: The amide carbon is C-1 of the chain.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xiv). Give the IUPAC name of the compound: CH3–CH(COCl)–CH2–CH3 (H.S.B. 2002)
Solution. 2-Methylbutanoyl chloride
Teacher's Note: Acid chloride ends in -oyl chloride; the COCl carbon is C-1.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xv). Give the IUPAC name of the compound: CH3CH2–C(CH3)(Br)–CH(Br)–CH2CH2OH (D.S.B. 2002)
Solution. 3,4-Dibromo-4-methylhexan-1-ol
Teacher's Note: Number from the OH end so the alcohol gets locant 1.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xvi). Give the IUPAC name of the compound: CH3–CH(OH)–CH(OH)–CH(Br)–CH2OH (A.I.S.B. 2002)
Solution. 2-Bromopentane-1,3,4-triol
Teacher's Note: Three OH groups: the suffix is -triol, with the final e kept before the consonant t.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xvii). Give the IUPAC name of the compound: CH3–C≡C–CH2–CHO (A.I.S.B. 2003)
Solution. Pent-3-yn-1-al
Teacher's Note: Aldehyde carbon is C-1; triple bond then gets locant 3.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xviii). Give the IUPAC name of the compound: Br–C6H4–COOC2H5 (para) (A.I.S.B. 2003)
Solution. Ethyl 4-bromobenzoate
Teacher's Note: Name alkyl group first, then the benzoate with its substituent locant.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xix). Give the IUPAC name of the compound: Benzene ring with OC2H5 and Cl in the meta (1,3) positions (D.S.B. 2003)
Solution. 3-Chloro-1-ethoxybenzene (as printed). Corrected: with alphabetical priority for the lowest locant, the standard name is 1-chloro-3-ethoxybenzene.
Teacher's Note: Both substituents are prefixes; alphabetical order decides which gets locant 1.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xx). Give the IUPAC name of the compound: Cyclohexane ring bearing –CH2OH (D.S.B. 2004 S)
Solution. Cyclohexylmethanol
Teacher's Note: The ring is a substituent on methanol.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.23 (xxi). Give the IUPAC name of the compound: CH3CONHC6H5 (A.I.S.B. 2004 S)
Solution. N-Phenylethanamide
Teacher's Note: Substituent on N takes the locant N.
Exam Note: Name parent chain, then prefixes alphabetically.
Question Short Q.24 (i). Write the structural formula of: But-3-en-1-ol. (H.S.B. 1994)
Solution. CH2=CH–CH2–CH2–OH.
Teacher's Note: Draw the parent chain from the name, then add each substituent at its locant.
Exam Note: Check locants against the drawn structure.
Question Short Q.24 (ii). Write the structural formula of: 2-Chlorobuta-1,3-diene. (H.S.B. 1994)
Solution. CH2=C(Cl)–CH=CH2.
Teacher's Note: Draw the parent chain from the name, then add each substituent at its locant.
Exam Note: Check locants against the drawn structure.
Question Short Q.24 (iii). Write the structural formula of: 2-Aminoethan-1-ol. (H.S.B. 1994)
Solution. H2N–CH2–CH2–OH.
Teacher's Note: Draw the parent chain from the name, then add each substituent at its locant.
Exam Note: Check locants against the drawn structure.
Question Short Q.24 (iv). Write the structural formula of: 4-Ethyl-5-methylhex-2-ene. (H.S.B. 1994)
Solution. (CH3)2CH–CH(CH2CH3)–CH=CH–CH3.
Teacher's Note: Draw the parent chain from the name, then add each substituent at its locant.
Exam Note: Check locants against the drawn structure.
Question Short Q.24 (v). Write the structural formula of: 2-Ethylprop-2-en-1-ol. (H.S.B. 1994)
Solution. CH3CH2–C(=CH2)–CH2OH.
Teacher's Note: Draw the parent chain from the name, then add each substituent at its locant.
Exam Note: Check locants against the drawn structure.
Question Short Q.24 (vi). Write the structural formula of: 2,4-Dimethylhexan-3-one. (H.S.B. 1994)
Solution. (CH3)2CH–C(=O)–CH(CH3)–CH2CH3.
Teacher's Note: Draw the parent chain from the name, then add each substituent at its locant.
Exam Note: Check locants against the drawn structure.
Question Short Q.24 (vii). Write the structural formula of: 2-Ethoxypropane. (H.S.B. 1994)
Solution. CH3CH2–O–CH(CH3)2.
Teacher's Note: Draw the parent chain from the name, then add each substituent at its locant.
Exam Note: Check locants against the drawn structure.
Question Short Q.25 (i). Pick out the error and write the correct IUPAC name for: 3-Pentyne.
Solution. Correct name: Pent-2-yne.
Teacher's Note: Number from the end giving the lowest locants; use the longest chain; use -diol, not dihydroxy.
Exam Note: Lowest locants, longest chain, correct suffix.
Question Short Q.25 (ii). Pick out the error and write the correct IUPAC name for: 1,6-Hexadiene.
Solution. Correct name: Hexa-1,5-diene.
Teacher's Note: Number from the end giving the lowest locants; use the longest chain; use -diol, not dihydroxy.
Exam Note: Lowest locants, longest chain, correct suffix.
Question Short Q.25 (iii). Pick out the error and write the correct IUPAC name for: 2-Ethyl-2-pentene.
Solution. Correct name: 3-Methylhex-3-ene.
Teacher's Note: Number from the end giving the lowest locants; use the longest chain; use -diol, not dihydroxy.
Exam Note: Lowest locants, longest chain, correct suffix.
Question Short Q.25 (iv). Pick out the error and write the correct IUPAC name for: 1,2-Dihydroxyethane.
Solution. Correct name: Ethane-1,2-diol.
Teacher's Note: Number from the end giving the lowest locants; use the longest chain; use -diol, not dihydroxy.
Exam Note: Lowest locants, longest chain, correct suffix.
Question Short Q.25 (v). Pick out the error and write the correct IUPAC name for: pent-4-en-1-yne.
Solution. Correct name: Pent-1-en-4-yne.
Teacher's Note: Number from the end giving the lowest locants; use the longest chain; use -diol, not dihydroxy.
Exam Note: Lowest locants, longest chain, correct suffix.
Question Short Q.26 (a). Which of the following represents the correct IUPAC name for the compound concerned: 2,2-Dimethylpentane or 2-Dimethylpentane? (N.C.E.R.T.)
Solution. 2,2-Dimethylpentane.
Teacher's Note: A locant must accompany each methyl; both methyls are on C-2.
Exam Note: Principal group first, then lowest locants.
Question Short Q.26 (b). Which of the following represents the correct IUPAC name for the compound concerned: 2,3-Dimethylpentane or 3,4-Dimethylpentane? (N.C.E.R.T.)
Solution. 2,3-Dimethylpentane.
Teacher's Note: Number from the end giving the lowest locant set: {2,3} beats {3,4}.
Exam Note: Principal group first, then lowest locants.
Question Short Q.26 (c). Which of the following represents the correct IUPAC name for the compound concerned: 2,4,7-Trimethyloctane or 2,5,7-Trimethyloctane? (N.C.E.R.T.)
Solution. 2,4,7-Trimethyloctane.
Teacher's Note: Compare the sets {2,4,7} and {2,5,7} at first point of difference.
Exam Note: Principal group first, then lowest locants.
Question Short Q.26 (d). Which of the following represents the correct IUPAC name for the compound concerned: 2-Chloro-4-methylpentane or 4-chloro-2-methylpentane? (N.C.E.R.T.)
Solution. 2-Chloro-4-methylpentane.
Teacher's Note: Tie in the locant sets: alphabetical order gives chloro the lower locant.
Exam Note: Principal group first, then lowest locants.
Question Short Q.26 (e). Which of the following represents the correct IUPAC name for the compound concerned: But-3-yn-1-ol or But-4-ol-1-yne? (N.C.E.R.T.)
Solution. But-3-yn-1-ol.
Teacher's Note: OH is the principal group and gets the lowest locant, and ending is -ol.
Exam Note: Principal group first, then lowest locants.
Question Short Q.43 (a). Classify the reagent shown in bold as nucleophile or electrophile; use curved arrows to show electron movement: CH3COOH + OH− → CH3COO− + H2O (N.C.E.R.T.)
Solution. OH− is a nucleophile (its lone pair takes the acidic H as a proton acceptor).
Teacher's Note: OH− uses its lone pair to bond to the H of the acid.
Exam Note: Nucleophile: arrow from lone pair to H.
Question Short Q.43 (b). Classify the reagent shown in bold: CH3COCH3 + NC− → CH3C(CN)(OH)CH3 (N.C.E.R.T.)
Solution. NC− is a nucleophile (it attacks the carbonyl carbon, which is electron-poor).
Teacher's Note: Cyanide donates a lone pair to the carbonyl carbon in nucleophilic addition.
Exam Note: Nucleophile attacks carbonyl carbon.
Question Short Q.43 (c). Classify the reagent shown in bold: C6H6 + CH3C+O → C6H5COCH3 (N.C.E.R.T.)
Solution. CH3CO+ is an electrophile (it accepts a pair of electrons from the benzene ring).
Teacher's Note: The acylium ion is electron-deficient and attacks the electron-rich ring.
Exam Note: Electrophile: electron-poor cation.
Question Short Q.51 (a). For the bond cleavage CH3O–OCH3 → CH3O· + ·OCH3, use curved arrows to show the electron flow and classify it as homolysis or heterolysis; identify the reactive intermediate. (N.C.E.R.T.)
Solution. Homolytic cleavage (each half-arrow takes one electron); the intermediates are free radicals (CH3O·).
Teacher's Note: Each atom keeps one electron of the shared pair.
Exam Note: Fish-hook arrows mean homolysis.
Question Short Q.51 (b). Classify the following: >C=O (with an α-hydrogen) + OH− → carbonyl compound with the α-H removed + H2O (as drawn in the book).
Solution. Heterolytic cleavage of the C–H bond; the reactive intermediate is a carbanion.
Teacher's Note: OH− removes H+, leaving the bonding pair on carbon.
Exam Note: Full-headed arrow; carbanion formed.
Question Short Q.51 (c). Classify the cleavage of the branched alkyl bromide drawn in the book, R–Br → R+ + Br−. (N.C.E.R.T.)
Solution. Heterolytic cleavage: the bonding pair goes to Br (more electronegative); the intermediate is a carbocation. (The printed answer line omits (c); this is worked out by analogy with the arrow shown.)
Teacher's Note: Br takes both electrons, so carbon becomes positive.
Exam Note: Carbocation intermediate.
Question Short Q.51 (d). Cyclohexene ring + E+ → ring carrying E with a positive charge on the adjacent carbon; classify. (N.C.E.R.T.)
Solution. Heterolysis (pair of π electrons moves to E); the reactive intermediate is a carbocation.
Teacher's Note: The π pair forms a sigma bond to E, leaving the neighbouring carbon positive.
Exam Note: Carbocation from attack on C=C.
Question Short Q.52 (a). Classify the reaction in one of the reaction types studied: CH3CH2Br + HS− → CH3CH2SH + Br− (N.C.E.R.T.)
Solution. Nucleophilic substitution.
Teacher's Note: HS− replaces Br− at carbon.
Exam Note: State the type and the key step.
Question Short Q.52 (b). Classify the reaction in one of the reaction types studied: (CH3)2C=CH2 + HCl → (CH3)2CCl–CH3 (N.C.E.R.T.)
Solution. Electrophilic addition.
Teacher's Note: H+ adds first to give the stable tertiary carbocation (Markovnikov).
Exam Note: State the type and the key step.
Question Short Q.52 (c). Classify the reaction in one of the reaction types studied: (CH3)3C–CH2OH + HBr → (CH3)2CBrCH2CH3 (N.C.E.R.T.)
Solution. Nucleophilic substitution with rearrangement.
Teacher's Note: Methyl shift converts a primary to a tertiary carbocation before Br− attacks.
Exam Note: State the type and the key step.
Question Short Q.52 (d). Classify the reaction in one of the reaction types studied: CH3CH2Br + HO− → CH2=CH2 + H2O (N.C.E.R.T.)
Solution. β-Elimination reaction.
Teacher's Note: OH− removes a β-H while Br leaves.
Exam Note: State the type and the key step.
C.B.S.E.-P.M.T. (Mains) Special
Question PMT Q.1. Give the IUPAC name of the saturated hydrocarbon having the carbon skeleton drawn in the book (a branched skeleton with an octane main chain carrying three methyl groups and one ethyl group).
Solution. 5-Ethyl-2,3,4-trimethyloctane.
Teacher's Note: Choose the longest chain, then give the lowest locant set to the substituents.
Exam Note: Longest chain first, then lowest locants.
Question PMT Q.2 (i). Give the IUPAC name of: (CH3)2C(CCl3)2
Solution. 1,1,1,3,3,3-Hexachloro-2,2-dimethylpropane.
Teacher's Note: Pick the principal group, then the longest chain containing it; rings or phenyl are prefixes.
Exam Note: Principal group sets the numbering.
Question PMT Q.2 (ii). Give the IUPAC name of: C6H5CH2CHO
Solution. 2-Phenylethan-1-al.
Teacher's Note: Pick the principal group, then the longest chain containing it; rings or phenyl are prefixes.
Exam Note: Principal group sets the numbering.
Question PMT Q.2 (iii). Give the IUPAC name of: (C6H5)2C(C2H5)–CHOH–CH3
Solution. 3,3-Diphenylpentan-2-ol.
Teacher's Note: Pick the principal group, then the longest chain containing it; rings or phenyl are prefixes.
Exam Note: Principal group sets the numbering.
Question PMT Q.2 (iv). Give the IUPAC name of: C6H5–CH2–C≡CH
Solution. 3-Phenylprop-1-yne.
Teacher's Note: Pick the principal group, then the longest chain containing it; rings or phenyl are prefixes.
Exam Note: Principal group sets the numbering.
Question PMT Q.2 (v). Give the IUPAC name of: cyclobutyl–CH(CH3)–CHO
Solution. 2-Cyclobutylpropan-1-al.
Teacher's Note: Pick the principal group, then the longest chain containing it; rings or phenyl are prefixes.
Exam Note: Principal group sets the numbering.
Question PMT Q.3. Draw the resonance structures of the carbocation HO–C6H4–CH2+ (p-hydroxybenzyl cation). Use curved arrows to show how one structure is converted into another.
Solution. I: HO–C6H4–CH2+ (positive charge on the side-chain carbon). The ring π electrons move towards CH2+ to give II and III, in which the benzene ring becomes quinoid (ring C=CH2 exocyclic double bond) and the positive charge sits on the ortho ring carbons (and on the para carbon bearing OH). Finally the lone pair on the O of the OH group moves into the ring to give IV: H–O+=C6H4=CH2, a quinoid structure in which every atom has an octet; this is the most important contributor.
Teacher's Note: Positive charge shifts to ortho and para carbons; the OH lone pair gives an all-octet oxonium form.
Exam Note: Show curved arrows from ring π bonds and O lone pair.
Question PMT Q.4 (a). Write the resonance structures of diazomethane (CH2N2).
Solution. I: −:CH2–N+≡N: ↔ II: CH2=N+=N−. The resonance hybrid is δ−CH2····N+····Nδ− (CH2 with partial negative, central N positive, terminal N partial negative).
Teacher's Note: Move the carbanion lone pair to form C=N and the N≡N π pair onto terminal N.
Exam Note: Show both contributors and the hybrid.
Question PMT Q.4 (b). Give the hybridised state of carbon and each N in the structures of diazomethane.
Solution. Structure I: C sp3, central N sp, terminal N sp. Structure II: C sp2, central N sp, terminal N sp2. In the resonance hybrid: C sp2, N sp, N sp (as printed).
Teacher's Note: Count sigma bonds plus lone pairs on each atom.
Exam Note: Count sigma bonds and lone pairs.
Question PMT Q.4 (c). How does the H–C–H bond angle in the hybrid compare with the bond angles predicted from each contributing structure?
Solution. The HCH angle in I is expected to be 109°28′ while in II it is expected to be 120°. Since the hybrid is a blend of I and II, therefore, the actual HCH angle has some intermediate value.
Teacher's Note: sp3 carbon gives about 109.5°, sp2 carbon gives 120°; the hybrid lies between.
Exam Note: Intermediate between 109.5° and 120°.
Question PMT Q.5 (i). Explain why each of the following are not resonance forms: singlet and triplet methylene.
Solution. Contributing structures must have the same number of paired electrons. Since singlet methylene has two paired electrons while triplet methylene has two unpaired electrons, they cannot be regarded as resonance forms.
Teacher's Note: Singlet and triplet differ in electron spin pairing, which resonance forbids.
Exam Note: Same number of unpaired electrons is required.
Question PMT Q.5 (ii). Explain why H2N–Ö–H (I) and H2N+=Ö–H (II) are not resonance forms.
Solution. In structure II, N has 10 electrons, so it cannot be regarded as a resonance structure of I.
Teacher's Note: Second-period atoms cannot exceed an octet.
Exam Note: N cannot hold ten electrons.
Question PMT Q.6. With proper justification, arrange the following in order of increasing stability: CH3CH2−, CH≡C−, CH2=CH−.
Solution. In the acetylide ion CH≡C−, the carbon atom carrying the −ve charge is sp-hybridised and has 50% s-character; in the CH2=CH− ion, the carbon atom is sp2-hybridised and has 33.3% s-character while in the CH3CH2− ion, the carbon atom bearing the −ve charge is sp3-hybridised and has 25% s-character. Since s-electrons, on the average, are closer to the nucleus than p-electrons, a carbon atom with greater s-character can accommodate or stabilise the negative charge better than a carbon atom with smaller s-character. The stability of the carbanion increases as the s-character of the carbon atom carrying the negative charge increases. Therefore, the order of stability is CH≡C− > CH2=CH− > CH3CH2−, i.e. increasing stability: CH3CH2− < CH2=CH− < CH≡C−.
Teacher's Note: Carbanion stability rises with s-character: sp (50%) > sp2 (33%) > sp3 (25%).
Exam Note: Quote the percentage s-character.
Question PMT Q.7. The carbocation F3C+ is more stable than carbocation F3C–C+<. Explain.
Solution. In the carbocation F3C–C+<, the strongly electron-withdrawing F3C group withdraws electrons of the C–C bond towards itself, thereby intensifying the positive charge and thus destabilising the carbocation relative to F3C+. On the other hand, in the carbocation F3C+, a lone pair of electrons on each of the three F atoms overlaps with the empty p-orbital of the carbon atom carrying the positive charge, thereby dispersing the positive charge and thus stabilising the carbocation F3C+ relative to F3C–C+<.
Teacher's Note: F lone pairs donate into the empty p orbital (back-donation), while a CF3 group pulls electrons through the sigma bond.
Exam Note: Contrast +M of F with −I of CF3.
Question PMT Q.8. Which of the following carbocations is more stable and why? (i) (CH3)3C+ and (ii) (CD3)3C+
Solution. Both carbocations (i) and (ii) are stabilised by hyperconjugation: in (i) the C–H bonds of the methyl groups overlap with the empty p-orbital (structures I-IV with H+ shown as no-bond forms), and in (ii) the C–D bonds do the same (structures V-VIII). Due to the stronger C–D bond, the contribution of structures V-VIII to carbocation (CD3)3C+ is less than those of structures I-IV for carbocation (CH3)3C+; therefore carbocation (i) is more stable than carbocation (ii). This effect is also sometimes called the β-secondary isotope effect.
Teacher's Note: C–D is stronger than C–H, so it hyperconjugates less and stabilises the cation less.
Exam Note: Answer (i); cite weaker C–D hyperconjugation.
Question PMT Q.9. Give the IUPAC name of the amine (CH3)2N–C(CH3)(CH2CH3)2 (I.I.T. 1993).
Solution. 3,N,N-Trimethylpentan-3-amine.
Teacher's Note: Longest chain with the C–N carbon is pentane; N substituents get the locant N.
Exam Note: N-locants for substituents on nitrogen.
Question PMT Q.10. Discuss the hybridisation of carbon atoms in allene (C3H4) and show the π-orbital overlaps. (I.I.T. 1999)
Solution. Allene is H2C(1)=C(2)=C(3)H2. The carbon atoms 1 and 3 are sp2-hybridised since each one of them is joined by a double bond. In contrast, carbon atom 2 is sp-hybridised since it has two double bonds. Thus, the two π-bonds in allene, like in acetylene, are perpendicular to each other: one π bond (from overlapping py orbitals) lies between C-1 and C-2, and the other (pz orbitals) between C-2 and C-3. Consequently Ha and Hb on C-1 lie in the plane of the paper while Hc and Hd on C-3 lie in a plane perpendicular to it. (The book’s orbital diagram is described here in words.)
Teacher's Note: The central sp carbon uses two perpendicular p orbitals for two perpendicular π bonds.
Exam Note: Give hybridisation of each C and perpendicular planes.
Question PMT Q.11. Write resonance structures of the given compound CH3–C(OH)=CH–CH=CH2 (as drawn). (I.I.T. 2003)
Solution. Three resonance structures can be written: I: CH3–C(–ÖH)=CH–CH=CH2; II: CH3–C(=O+H)–CH−–CH=CH2 (the O lone pair forms C=O+, and the C=C π pair moves onto carbon); III: CH3–C(=O+H)–CH=CH–CH2−. (Structure drawn in the book with curved arrows; the printed charges/arrows are hard to read, so I wrote them in the usual pattern.)
Teacher's Note: The OH lone pair pushes electron density along the conjugated C=C–C=C chain.
Exam Note: Start with O lone pair; use curved arrows.
Multiple Choice Questions
Question MCQ 1. Which of the following types of hybridization is involved in the formation of cycloalkanes?
(a) sp3 (b) sp (c) sp2 (d) sp3d2
Solution. Correct option: (a) sp3. Ring carbons in cycloalkanes form four sigma bonds, so they are sp3-hybridised.
Teacher's Note: Four sigma bonds around each carbon means sp3.
Exam Note: Count sigma bonds to find hybridisation.
Question MCQ 2. Which one of the following compounds has delocalised electrons?
(a) Methane (b) Ethane (c) Cyclohexane (d) Benzene
Solution. Correct option: (d) Benzene. Benzene has six π electrons delocalised over the ring.
Teacher's Note: Only the conjugated π system of benzene has delocalised electrons.
Exam Note: Delocalisation needs conjugated π bonds.
Question MCQ 3. Which of the following shows position isomerism?
(a) butane and isobutane (b) cis- and trans-but-2-ene (c) chair and boat forms of cyclohexane (d) 1,2-, 1,3- and 1,4-dimethylbenzenes
Solution. Correct option: (d) 1,2-, 1,3- and 1,4-dimethylbenzenes. The same substituents occupy different positions on the ring.
Teacher's Note: Position isomers differ in where a group sits on the same skeleton.
Exam Note: Same skeleton, different positions of the group.
Question MCQ 4. The state of hybridization of the asterisked carbon (the central carbon) in CH3CH=C*=CH2 is:
(a) sp (b) sp2 (c) sp3 (d) none of these
Solution. Correct option: (a) sp. The central carbon of allene has two double bonds (two π bonds, two sigma bonds), so it is sp-hybridised.
Teacher's Note: Two double bonds on one carbon means sp.
Exam Note: Two π bonds on one carbon means sp.
Question MCQ 5. Which of the following are isomers?
(a) Ethyl alcohol and dimethyl ether (b) Methyl alcohol and dimethyl ether (c) Acetone and acetaldehyde (d) Propionic acid and propanone
Solution. Correct option: (a) Ethyl alcohol and dimethyl ether. Both are C2H6O (functional isomers).
Teacher's Note: Isomers share molecular formula, so compare formulas first.
Exam Note: Compare molecular formulas.
Question MCQ 6. Which of the following represents a homologous series?
(a) ethane, ethylene, ethyne (b) methane, methanol, methanal (c) methane, ethane, propane (d) 1-hexene, 2-hexene, 3-hexene
Solution. Correct option: (c) methane, ethane, propane. Successive members differ by CH2 and have the same functional group (all alkanes).
Teacher's Note: Homologues differ by CH2 with the same functional group.
Exam Note: Look for CH2 difference and same group.
Question MCQ 7. The IUPAC name for the hydrocarbon represented by the swastika sign (a central carbon bearing four ethyl groups) is:
(a) Neononane (b) Tetraethylcarbon (c) 2-Ethylpentane (d) 3,3-Diethylpentane
Solution. Correct option: (d) 3,3-Diethylpentane. The central carbon bears four ethyl groups; the longest chain is pentane with two ethyl groups on C-3.
Teacher's Note: Pick the longest chain through the central carbon: pentane.
Exam Note: Longest chain, then substituents.
Question MCQ 8. The members of a homologous series have:
(a) Different general formulae (b) Different molecular weights (c) Different methods of preparation (d) Different chemical properties
Solution. Correct option: (b) Different molecular weights. Each member differs from the next by CH2 (14 mass units), so molecular weights differ.
Teacher's Note: Members share a general formula and similar chemistry.
Exam Note: Same general formula, differing molar mass.
Question MCQ 9. For the compound CH3–CHCl–CHCl–CH2CH2CH2CH2CH2Cl, the correct set of locants is:
(a) 1, 1, 2, 7 (b) 1, 6, 7, 7 (c) 1, 6, 7 (d) 2, 3, 8
Solution. Correct option: (c) 1, 6, 7. Numbering from the CH2Cl end gives the lowest locant set {1, 6, 7} (answer as printed in the book).
Teacher's Note: Choose the numbering end giving the lowest locant set.
Exam Note: Lowest locant set decides numbering.
Question MCQ 10. The common and IUPAC names for the group (CH3)2CHCH2– respectively are:
(a) Isobutyl, 2-methylpropyl (b) Isobutyl, 1-methylpropyl (c) tert-Butyl, 1,1-dimethylethyl (d) sec-Butyl, 2-methylpropyl
Solution. Correct option: (a) Isobutyl, 2-methylpropyl. The group is isobutyl, named 2-methylpropyl in IUPAC (C-1 is the attachment carbon).
Teacher's Note: Number the substituent chain from the attachment point.
Exam Note: Number alkyl groups from attachment carbon.
Question MCQ 11. The IUPAC name for the compound (a cycloalkane ring bearing a CH(CH3)2 group) is:
(a) 2-Cyclopentylpropane (b) 1,1-Dimethyl-1-cyclopentylmethane (c) (1-Methylethyl)cyclopentane (d) 1-Cyclopentylpropane
Solution. Correct option: (c) (1-Methylethyl)cyclopentane. The ring is the parent and the CH(CH3)2 group is named as the (1-methylethyl) substituent.
Teacher's Note: The ring is parent; name the isopropyl as 1-methylethyl.
Exam Note: Ring is parent when larger than substituent.
Question MCQ 12. Which of the following species is an electrophile?
(a) H2O (b) NH3 (c) C2H5OH (d) SO3
Solution. Correct option: (d) SO3. SO3 is electron-deficient at S and accepts an electron pair; the others have lone pairs and are nucleophiles.
Teacher's Note: Look for electron-deficient centres.
Exam Note: Electron-deficient centre means electrophile.
Question MCQ 13. Which of the following species is a nucleophile?
(a) NO2+ (b) :NO2− (c) :CX2 (d) ·CH3
Solution. Correct option: (b) :NO2−. The nitrite ion has a lone pair to donate; NO2+, carbenes and free radicals are electrophilic.
Teacher's Note: Lone pair on a negative ion makes a nucleophile.
Exam Note: Negative ion with lone pair is a nucleophile.
Question MCQ 14. Which of the following series contains only electrophiles?
(a) H2O, SO3, H3O+ (b) NH3; H2O, AlCl3 (c) AlCl3, SO3, NO2+ (d) H2O, Cl+, NH3
Solution. Correct option: (c) AlCl3, SO3, NO2+. AlCl3, SO3 and NO2+ are all electron-deficient.
Teacher's Note: Water and ammonia have lone pairs, so series with them include nucleophiles.
Exam Note: Reject series containing H2O or NH3.
Question MCQ 15. Out of the following, the one containing only nucleophiles is:
(a) NH3, CN−, CH3OH (b) AlCl3, BF3, NH3 (c) AlCl3, NH2−, H2O (d) RNH2, :CX2, H−
Solution. Correct option: (a) NH3, CN−, CH3OH. Each of NH3, CN− and CH3OH has a lone pair.
Teacher's Note: Check every member has a lone pair.
Exam Note: Every species must have a lone pair.
Question MCQ 16. The C–C bond length in propene is a little shorter (1.49 Å) than the C–C bond length (1.54 Å) in ethane. This is due to:
(a) +I-effect of CH3 group (b) Mesomeric effect (c) Electromeric effect (d) Hyperconjugation effect
Solution. Correct option: (d) Hyperconjugation effect. Answer as printed in the book: hyperconjugation. (The shortening is mainly attributed to the sp2–sp3 hybrid overlap.)
Teacher's Note: Pick from the listed effects; hyperconjugation is the intended one.
Exam Note: Book answer: hyperconjugation.
Question MCQ 17. The Cl–C–Cl angle in 1,1,2,2-tetrachloroethene and tetrachloromethane will be about (I.I.T. 1988):
(a) 120° and 109.5° (b) 90° and 109.5° (c) 109.5° and 90° (d) 109.5° and 120°
Solution. Correct option: (a) 120° and 109.5°. The ethene carbons are sp2 (120°); the methane carbon is sp3 (109.5°).
Teacher's Note: Match sp2 with 120° and sp3 with 109.5°.
Exam Note: Order matters: ethene first.
Question MCQ 18. The compound with an isopropyl group is (I.I.T. 1989):
(a) 2,2,3,3-Tetramethylpentane (b) 2,2-Dimethylpentane (c) 2,2,3-Trimethylpentane (d) 2-Methylpentane
Solution. Correct option: (d) 2-Methylpentane. 2-Methylpentane, (CH3)2CHCH2CH2CH3, ends with a CH(CH3)2 group.
Teacher's Note: Look for a terminal CH(CH3)2 group.
Exam Note: Spot terminal CH(CH3)2.
Question MCQ 19. The number of isomers of C6H14 is (M.L.N.R. Allahabad 1996):
(a) 4 (b) 5 (c) 6 (d) 7
Solution. Correct option: (b) 5. Hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane and 2,3-dimethylbutane.
Teacher's Note: Enumerate by shortening the main chain.
Exam Note: Five isomers; list them.
Question MCQ 20. The C–H bond distance is longest in (I.I.T. 1989; M.L.N.R. Allahabad 1990):
(a) C2H2 (b) C2H4 (c) C2H6 (d) C2H2Br2
Solution. Correct option: (c) C2H6. The C of ethane is sp3 with the least s-character, so the C–H bond is longest.
Teacher's Note: More s-character gives a shorter C–H bond.
Exam Note: Less s-character, longer bond.
Question MCQ 21. How many acyclic isomers are possible for C4H10O? (M.L.N.R. Allahabad 1992)
(a) 7 (b) 4 (c) 5 (d) 6
Solution. Correct option: (a) 7. Four alcohols (butan-1-ol, butan-2-ol, 2-methylpropan-1-ol, 2-methylpropan-2-ol) and three ethers (methoxypropane, 2-methoxypropane, ethoxyethane) = 7.
Teacher's Note: Count alcohols and ethers separately.
Exam Note: Alcohols 4 plus ethers 3.
Question MCQ 22. The IUPAC name for CH3–CH(OH)–CH2–C(CH3)(OH)–CH3 is (M.L.N.R. Allahabad 1992):
(a) 1,1-Dimethyl-1,3-butanediol (b) 4-Methyl-2,4-pentanediol (c) 2-Methyl-2,4-pentanediol (d) 1,3,3-Trimethyl-1,3-propanediol
Solution. Correct option: (c) 2-Methyl-2,4-pentanediol. The longest chain has five carbons with OH on C-2 and C-4 and a methyl on C-2: 2-methylpentane-2,4-diol.
Teacher's Note: Number so that the two OH groups get the lowest locants.
Exam Note: Principal group gets lowest locants.
Question MCQ 23. The most stable free radical among the following is (C.A.T.E. 1992):
(a) C6H5CH2CH2· (b) C6H5CH·CH3 (c) CH3CH2· (d) CH3CH·CH3
Solution. Correct option: (b) C6H5CH·CH3. C6H5CH·CH3 is a secondary benzylic radical, stabilised by resonance with the benzene ring.
Teacher's Note: Benzylic radicals are resonance stabilised.
Exam Note: Benzylic plus secondary beats the rest.
Question MCQ 24. Which of the following has a bond formed by overlap of sp–sp3 hybrid orbitals? (M.L.N.R. Allahabad 1993)
(a) CH3–C≡C–H (b) CH3–CH=CH–CH3 (c) CH2=CH–CH=CH2 (d) HC≡CH
Solution. Correct option: (a) CH3–C≡C–H. In CH3–C≡C–H the CH3–C bond joins an sp3 carbon to an sp carbon.
Teacher's Note: Find the single bond between a methyl and the triple-bonded carbon.
Exam Note: Spot sp3–sp single bond.
Question MCQ 25. What is the decreasing order of stability of the ions? I. CH3–C+H–CH3 II. CH3–C+H–OCH3 III. CH3–C+H–COCH3 (I.I.T. 1993)
(a) I > II > III (b) II > III > I (c) III > I > II (d) II > I > III
Solution. Correct option: (d) II > I > III. OCH3 donates a lone pair (+M), stabilising II most; the acyl group in III is electron-withdrawing, destabilising it.
Teacher's Note: Donors stabilise cations; acyl groups destabilise them.
Exam Note: +M group best, acyl group worst.
Question MCQ 26. The maximum number of carbon atoms arranged linearly in the molecule CH3–C≡C–CH=CH2 is (I.S.M. Dhanbad 1994):
(a) 5 (b) 4 (c) 3 (d) 2
Solution. Correct option: (b) 4. The two sp carbons and the two atoms attached to them (the CH3 carbon and the =CH carbon) lie in a line: four carbons.
Teacher's Note: The two sp carbons and their immediate carbon neighbours are collinear.
Exam Note: Linear: sp carbons plus attached atoms.
Question MCQ 27. Which of the following molecular formulae belongs to the alkyne series? (C.B.S.E. P.M.T. 1994)
(a) C7H14 (b) C10H22 (c) C9H16 (d) C16H32
Solution. Correct option: (c) C9H16. Alkynes have the general formula CnH2n−2; for n = 9 this gives C9H16.
Teacher's Note: Test CnH2n−2 for each formula.
Exam Note: Alkyne formula CnH2n−2.
Question MCQ 28. The structure of 4-methyl-2-penten-1-ol is (C.B.S.E. P.M.T. 1994):
(a) CH3CH2CH=CHCH2OH (b) (CH3)2C=CHCH2CH2OH (c) (CH3)2CHCH=CHCH2OH (d) CH3CHOH–CH=C(CH3)2
Solution. Correct option: (c) (CH3)2CHCH=CHCH2OH. HOCH2 is C-1, C=C is at C-2 and a methyl is on C-4: (CH3)2CH–CH=CH–CH2OH.
Teacher's Note: Draw the five-carbon chain, then add methyl and OH.
Exam Note: Draw chain from locants.
Question MCQ 29. The order of decreasing stability of the carbanions (CH3)3C− (I); (CH3)2CH− (II); CH3CH2− (III); C6H5CH2− (IV) is (Haryana C.E.E.T. 1996):
(a) I > II > III > IV (b) IV > III > II > I (c) IV > I > II > III (d) I > II > IV > III
Solution. Correct option: (b) IV > III > II > I. Benzylic carbanion is resonance-stabilised (IV); then 1° > 2° > 3° because alkyl +I groups destabilise carbanions.
Teacher's Note: Resonance first, then fewer alkyl groups.
Exam Note: Benzyl highest; 3° carbanion lowest.
Question MCQ 30. The number and type of bonds between two carbon atoms in CaC2 are (I.I.T. 1996):
(a) one sigma (σ) and one pi (π) bonds (b) one sigma (σ) and two pi (π) bonds (c) one sigma (σ) and one and a half pi (π) bonds (d) one sigma (σ) bond
Solution. Correct option: (b) one sigma (σ) and two pi (π) bonds. CaC2 contains the acetylide ion C22−, in which the carbons are joined by a triple bond: one sigma and two pi bonds.
Teacher's Note: Acetylide carbons are triple-bonded.
Exam Note: C22− has C≡C.
Question MCQ 31. The cylindrical shape of an alkyne is due to (C.B.S.E. P.M.T. 1997):
(a) three sigma carbon-carbon bonds (b) three π-carbon-carbon bonds (c) two sigma carbon-carbon and one π-carbon-carbon bond (d) one sigma carbon-carbon and two π-carbon-carbon bonds
Solution. Correct option: (d) one sigma carbon-carbon and two π-carbon-carbon bonds. The two perpendicular π bonds around the sigma bond form a cylindrical electron cloud.
Teacher's Note: Two perpendicular π bonds wrap around the axis.
Exam Note: Triple bond: 1 sigma plus 2 pi.
Question MCQ 32. Number of isomers of C4H9– is (A.F.M.C. 1997):
(a) 2 (b) 3 (c) 4 (d) None of these
Solution. Correct option: (c) 4. Four butyl groups: n-butyl, sec-butyl, isobutyl and tert-butyl.
Teacher's Note: Butyl groups come from butane and isobutane, two positions each.
Exam Note: Four butyl groups: n-, sec-, iso-, tert-.
Question MCQ 33. IUPAC name of the compound CH3–CH(CH2CH3)–CH2–CHOH–CH3 is (A.F.M.C. 1997):
(a) 4-Methyl-3-hexanol (b) Heptanol (c) 4-Methyl-2-hexanol (d) None of these
Solution. Correct option: (c) 4-Methyl-2-hexanol. The longest chain has six carbons, OH on C-2 and a methyl on C-4: 4-methylhexan-2-ol.
Teacher's Note: Number from the end giving OH the lowest locant.
Exam Note: OH gets the lowest locant.
Question MCQ 34. The IUPAC name of the compound having formula (CH3)3C–CH=CH2 is (I.I.T. 1984; A.I.I.M.S. 1997):
(a) 3,3,3-Trimethylpropene (b) 1,1,1-Trimethyl-2-pentene (c) 3,3-Dimethyl-1-butene (d) 2,2-Dimethyl-3-butene
Solution. Correct option: (c) 3,3-Dimethyl-1-butene. The chain is butene with the double bond at C-1 and two methyls at C-3.
Teacher's Note: Number from the end that gives the double bond the lower locant.
Exam Note: Double bond gets the lowest locant.
Question MCQ 35. The enolic form of acetone contains (I.I.T. 1990; A.I.I.M.S. 1997):
(a) 9 sigma bonds, 1 pi bond and two lone pairs (b) 8 sigma bonds, 2 pi bonds and two lone pairs (c) 10 sigma bonds, 1 pi bond and one lone pair (d) 9 sigma bonds, 2 pi bonds and one lone pair
Solution. Correct option: (a) 9 sigma bonds, 1 pi bond and two lone pairs. The enol is CH2=C(OH)CH3: sigma bonds = 5 C–H + 1 O–H + 1 C–C + 1 C–O + 1 sigma of C=C = 9; one π bond; two lone pairs on O.
Teacher's Note: Count every single bond and the sigma of the double bond.
Exam Note: Count lone pairs on O: two.
Multiple Choice Questions (continued)
Question MCQ 36. The IUPAC name of CH3–C(Cl)=C(CH3)–CH(C2H5)–CH2–C≡CH is (M.P.C.E.E. 1998):
(a) 6-Chloro-4-ethyl-5-methylhept-5-en-1-yne (b) 6-Chloro-4-ethyl-5-methylhept-1-yn-5-ene (c) 2-Chloro-4-ethyl-3-methylhep-2-en-6-yne (d) 2-Chloro-4-ethyl-3-methylhep-6-yn-2-ene
Solution. Correct option: (a) 6-Chloro-4-ethyl-5-methylhept-5-en-1-yne. Corrected: the book prints (d), but numbering from the alkyne end gives the multiple-bond locants {1,5}, lower than {2,6} from the other end, and the name is written as hept-5-en-1-yne. So the correct option is (a).
Teacher's Note: Lowest locants go to multiple bonds together; with a tie, to the double bond.
Exam Note: Number so multiple bonds get lowest locants.
Question MCQ 37. The correct IUPAC name of the compound with molecular formula (CH3)3C–CH3 is (Haryana C.E.E.T. 1998):
(a) Pentane (b) 1,1,1-Trimethylethane (c) 2,2-Dimethylpropane (d) Neopentane
Solution. Correct option: (c) 2,2-Dimethylpropane. The longest chain is three carbons (propane) with two methyl groups on C-2.
Teacher's Note: Neopentane is the common name, not IUPAC.
Exam Note: Common names are not IUPAC.
Question MCQ 38. The IUPAC name for CH3–C(CH3)=CH–COOH is (Pb. P.M.T. 1998):
(a) 2-Methyl-2-butenoic acid (b) 3-Methyl-3-butenoic acid (c) 3-Methyl-2-butenoic acid (d) 2-Methyl-3-butenoic acid
Solution. Correct option: (c) 3-Methyl-2-butenoic acid. COOH is C-1, the double bond starts at C-2 and the methyl sits on C-3.
Teacher's Note: Number from the carboxyl carbon.
Exam Note: COOH carbon is always C-1.
Question MCQ 39. The IUPAC name of the compound having the formula Cl3CCH2CHO is (M.P. P.M.T. 1998):
(a) 3,3,3-Trichloropropanal (b) 1,1,1-Trichloropropanal (c) 2,2,2-Trichloropropanal (d) Chloral
Solution. Correct option: (a) 3,3,3-Trichloropropanal. The CHO carbon is C-1, so the three Cl atoms sit on C-3.
Teacher's Note: Aldehyde carbon is C-1.
Exam Note: Aldehyde carbon is always C-1.
Question MCQ 40. Which of the following is correct regarding the −I effect of the substituents? (C.B.S.E. P.M.T. 1998)
(a) –NR2 < –OR < –F (b) –NR2 > –OR < –F (c) –NR2 < –OR > –F (d) –NR2 > –OR > –F
Solution. Correct option: (a) –NR2 < –OR < –F. The −I effect rises with the electronegativity of the attached atom: N < O < F.
Teacher's Note: Compare electronegativity of the atom bonded to carbon.
Exam Note: −I follows electronegativity N < O < F.
Question MCQ 41. Which of the following is an electrophile? (I.M.S. B.H.U. 1998)
(a) H2O (b) NH3 (c) AlCl3 (d) C2H5NH2
Solution. Correct option: (c) AlCl3. AlCl3 has an incomplete octet (a Lewis acid) and accepts an electron pair; the others have lone pairs.
Teacher's Note: Incomplete octet means Lewis acid means electrophile.
Exam Note: Electron-deficient: Lewis acid.
Question MCQ 42. Which of the following carbon atoms is likely to possess tetrahedral geometry in H2C(4)=CH(3)–CH2(2)–COOH(1)? (C.P.M.T. 1999)
(a) 1 (b) 2 (c) 3 (d) 4
Solution. Correct option: (b) 2. C-2 (the CH2) is sp3-hybridised, so it alone is tetrahedral; C-1, C-3 and C-4 are sp2.
Teacher's Note: Tetrahedral means sp3: no double bond on that carbon.
Exam Note: Only the sp3 carbon is tetrahedral.
Question MCQ 43. Bond length of ethane (I), ethene (II), acetylene (III) and benzene (IV) follows the order (C.P.M.T. 1999):
(a) I > II > III > IV (b) I > II > IV > III (c) I > IV > II > III (d) III > IV > II > I
Solution. Correct option: (c) I > IV > II > III. C–C bond lengths: ethane 154 pm > benzene 139 pm > ethene 134 pm > acetylene 120 pm.
Teacher's Note: Benzene bond order is 1.5, between single and double.
Exam Note: Benzene sits between ethane and ethene.
Question MCQ 44. The compounds CH3–O–C3H7 and C2H5–O–C2H5 exhibit (A.F.M.C. 1999):
(a) optical isomerism (b) cis-trans isomerism (c) metamerism (d) chain isomerism
Solution. Correct option: (c) metamerism. Both are ethers (C4H10O) differing in the alkyl groups on either side of oxygen: metamers.
Teacher's Note: Same functional group, different alkyl groups, means metamers.
Exam Note: Same group, different alkyl groups: metamerism.
Question MCQ 45. The IUPAC name of CH3–CH=C(CH2CH3)–CH2–CH2–CH3 is (C.P.M.T. 1999):
(a) 3-Ethyl-2-hexene (b) 3-Propyl-2-hexene (c) 3-Propyl-3-hexene (d) 4-Ethyl-4-hexene
Solution. Correct option: (a) 3-Ethyl-2-hexene. The longest chain containing C=C has six carbons: hex-2-ene with an ethyl group on C-3.
Teacher's Note: Choose the longest chain that contains the double bond.
Exam Note: Longest chain must include the C=C.
Question MCQ 46. In the compound CH2=CH–CH2–CH2–C≡CH, the C2–C3 bond is of the type (I.I.T. 1999):
(a) sp–sp2 (b) sp3–sp3 (c) sp–sp3 (d) sp2–sp3
Solution. Correct option: (d) sp2–sp3. C-2 is the =CH carbon (sp2) and C-3 is a CH2 (sp3).
Teacher's Note: Identify each carbon by its multiple bond.
Exam Note: Assign hybridisation to each carbon.
Question MCQ 47. The number of possible alkynes with molecular formula C5H8 is (M.P. P.M.T. 2000):
(a) 2 (b) 3 (c) 4 (d) 5
Solution. Correct option: (b) 3. Pent-1-yne, pent-2-yne and 3-methylbut-1-yne.
Teacher's Note: Place the triple bond in each chain skeleton.
Exam Note: Three alkynes of C5H8.
Question MCQ 48. The IUPAC name of CH3–CH(C2H5)–C(CH3)(C4H9)–CH3 is (B.H.U. 1998; Karnataka C.E.T. 2000):
(a) 2-Butyl-2-methyl-2-ethylbutane (b) 2-Ethyl-3,3-dimethylheptane (c) 3,4,4-Trimethylheptane (d) 3,4,4-Trimethyloctane
Solution. Correct option: (d) 3,4,4-Trimethyloctane. The longest chain (butyl + the two central carbons + ethyl) has eight carbons, with methyls on C-3 and C-4 (two).
Teacher's Note: Find the longest chain through the butyl group.
Exam Note: Longest chain first.
Question MCQ 49. The IUPAC name of cyclohexyl–CONH–C6H5 is (D.C.E. 2000):
(a) N-Cyclohexylbenzamide (b) N-Phenyl-N-cyclohexylmethanamide (c) N-Phenylcyclohexanecarboxamide (d) N-Cyclohexyl-N-phenylmethanamide
Solution. Correct option: (c) N-Phenylcyclohexanecarboxamide. The ring bearing CONH– is named cyclohexanecarboxamide; the phenyl on N takes the N locant.
Teacher's Note: Ring carrying the amide carbon is the parent.
Exam Note: N-phenyl locant for substituent on N.
Question MCQ 50. IUPAC name of acraldehyde is (M.P.P.M.T. 2000):
(a) Prop-2-en-1-al (b) Propenyl aldehyde (c) But-2-en-1-al (d) Propenal
Solution. Correct option: (a) Prop-2-en-1-al. Acraldehyde is CH2=CH–CHO, prop-2-en-1-al.
Teacher's Note: Acraldehyde is the common name of the three-carbon unsaturated aldehyde.
Exam Note: Aldehyde carbon is C-1.
Question MCQ 51. The IUPAC name of CH3CH=CHCOOC2H5 is (Haryana C.E.E.T. 2000):
(a) Ethyl but-1-enoate (b) Ethyl but-2-enoate (c) Ethyl prop-2-enoate (d) Ethyl prop-2-enate
Solution. Correct option: (b) Ethyl but-2-enoate. The acid part CH3CH=CHCOO is but-2-enoate; the alkyl group is named first.
Teacher's Note: Name alkyl group, then the acid with -oate.
Exam Note: Alkyl first, then -oate.
Question MCQ 52. The IUPAC name of cyclohexylidene=C=O (cyclohexane ring with an exocyclic C=C=O) is (D.C.E. 2000):
(a) Cyclohexanone (b) Cyclohexyl methanone (c) Oxycyclohexene (d) Cyclohexylidenemethanone
Solution. Correct option: (d) Cyclohexylidenemethanone. The ring carbon is doubly bonded to a C=O carbon: cyclohexylidenemethanone (a ketene).
Teacher's Note: Name the ring as cyclohexylidene attached to methanone.
Exam Note: Ketene names use -ylidene.
Question MCQ 53. The most stable carbanion among the following is (D.C.E. 2000):
(a) C6H5–CH2CH2− (b) C6H5CH2− (c) p-CH3O–C6H4–CH2− (d) p-O2N–C6H4–CH2−
Solution. Correct option: (d) p-O2N–C6H4–CH2−. The p-NO2 group is strongly electron-withdrawing (−I, −M) and delocalises the negative charge, stabilising the benzyl carbanion most.
Teacher's Note: Electron-withdrawing groups stabilise anions.
Exam Note: Nitro group stabilises carbanion.
Question MCQ 54. Among the following alkenes: 1-butene (I), cis-2-butene (II), trans-2-butene (III), the decreasing order of stability is (C.B.S.E. 2000):
(a) III > II > I (b) III > I > II (c) I > II > III (d) II > I > III
Solution. Correct option: (a) III > II > I. More substituted C=C is more stable (hyperconjugation); trans-2-butene is less strained than cis.
Teacher's Note: Internal alkenes beat terminal; trans beats cis.
Exam Note: More substituted, then trans over cis.
Question MCQ 55. The compound which contains all the four 1°, 2°, 3°, 4° carbon atoms is (D.C.E. 2000):
(a) 2,3-Dimethylpentane (b) 3-Chloro-2,3-dimethylpentane (c) 2,3,4-Trimethylpentane (d) 3,3-Dimethylpentane
Solution. Correct option: (b) 3-Chloro-2,3-dimethylpentane. Answer as printed in the book. (Strictly, C-3 of (b) has three carbon neighbours; it counts as 4° only if all four non-hydrogen attachments, including Cl, are counted. Please check.)
Teacher's Note: Classify each carbon by the number of other carbons attached.
Exam Note: Count carbon neighbours for 1°, 2°, 3°, 4°.
Question MCQ 56. IUPAC name of 4-isopropyl-m-xylene is (D.P.M.T. 2002):
(a) 1-Isopropyl-2,4-dimethylbenzene (b) 4-Isopropyl-m-xylene (c) 1-Isopropyl-3,5-dimethylbenzene (d) 4-Isopropyl-3,5-dimethylbenzene
Solution. Correct option: (a) 1-Isopropyl-2,4-dimethylbenzene. m-Xylene has methyls at 1,3; isopropyl at 4 gives 1-isopropyl-2,4-dimethylbenzene (lowest locants {1,2,4}).
Teacher's Note: Re-number the ring so the substituent set is lowest.
Exam Note: Renumber to get lowest locant set.
Question MCQ 57. Which of the following compound has wrong IUPAC name? (A.I.E.E.E. 2002)
(a) CH3CH2CH2COOCH2CH3: ethyl butanoate (b) CH3CH(CH3)CH2CHO: 3-methylbutanal (c) CH3CH(OH)CH(CH3)CH3: 2-methyl-3-butanol (d) CH3CH(CH3)C(=O)CH2CH3: 2-methyl-3-pentanone
Solution. Correct option: (c) CH3CH(OH)CH(CH3)CH3: 2-methyl-3-butanol. CH3CH(OH)CH(CH3)CH3 is 3-methylbutan-2-ol (OH must get the lowest locant, 2).
Teacher's Note: The principal group (OH) takes the lowest locant.
Exam Note: OH gets the lowest locant.
Question MCQ 58. −:CH2–C(=O)–CH3 and CH2=C(O−)–CH3 are (C.B.S.E. P.M.T. 2002):
(a) Resonating structures (b) Tautomers (c) Geometrical isomers (d) Optical isomers
Solution. Correct option: (a) Resonating structures. They differ only in the position of electrons (enolate anion resonance forms).
Teacher's Note: Same atoms, only electrons shifted.
Exam Note: Only electrons move: resonance.
Question MCQ 59. The arrangement of (CH3)3C–, (CH3)2CH–, CH3CH2– when attached to benzene or an unsaturated group in increasing order of inductive effect is (A.I.E.E.E. 2002):
(a) (CH3)3C– < (CH3)2CH– < CH3CH2– (b) CH3CH2– < (CH3)2CH– < (CH3)3C– (c) (CH3)2CH– < (CH3)3C– < CH3CH2– (d) (CH3)3C– < CH3CH2– < (CH3)2CH–
Solution. Correct option: (a) (CH3)3C– < (CH3)2CH– < CH3CH2–. Answer as printed: when attached to an unsaturated group or benzene the usual +I order is reversed (more C–H bonds give more hyperconjugation), so the effective order is as in option (a).
Teacher's Note: Reversed order: more α-H means more hyperconjugation.
Exam Note: Reversal when attached to a π system.
Question MCQ 60. The reaction (CH3)3C–Br + H2O → (CH3)3C–OH is (A.I.E.E.E. 2002):
(a) elimination reaction (b) substitution reaction (c) free radical reaction (d) addition reaction
Solution. Correct option: (b) substitution reaction. Br is replaced by OH: a substitution (SN1) reaction.
Teacher's Note: One group replaces another at the same carbon.
Exam Note: Br replaced by OH: substitution.
Question MCQ 61. The IUPAC name of cyclohexene bearing a CH3 group on the carbon next to the double bond is (A.I.I.M.S. 2003):
(a) 3-Methylcyclohexene (b) 1-Methylcyclohex-2-ene (c) 6-Methylcyclohexene (d) 1-Methylcyclohex-5-ene
Solution. Correct option: (a) 3-Methylcyclohexene. The double bond carbons are C-1 and C-2; the adjacent methyl-bearing carbon is C-3.
Teacher's Note: Number the double bond as 1,2, then the methyl gets the lowest locant.
Exam Note: Double bond gets C-1 and C-2.
Question MCQ 62. The IUPAC name of CH3COCH(CH3)2 is (A.I.E.E.E. 2003):
(a) 3-methyl-2-butanone (b) Isopropyl methyl ketone (c) 2-methyl-3-butanone (d) 4-methyl isopropyl ketone
Solution. Correct option: (a) 3-methyl-2-butanone. The carbonyl is on C-2 (lowest locant) and the methyl on C-3.
Teacher's Note: Ketone carbon gets the lowest locant.
Exam Note: Number from the end nearest C=O.
Question MCQ 63. Which of the following is a dehydrohalogenation reaction? (M.G.I.M.S. Wardha 2003)
(a) C2H5Cl + KOH → CH2=CH2 + KCl + H2O (the book prints “aq. KOH”; alcoholic KOH is the reagent that gives the alkene) (b) BrCH2–CH2Br + Zn → CH2=CH2 + ZnBr2 (c) CH3COOH + CH3OH → CH3COOCH3 + H2O (d) Both (a) and (b)
Solution. Correct option: (a) C2H5Cl + KOH → CH2=CH2 + KCl + H2O (the book prints “aq. KOH”; alcoholic KOH is the reagent that gives the alkene). Loss of HCl from the alkyl halide forms the alkene; (b) is dehalogenation and (c) is esterification.
Teacher's Note: Dehydrohalogenation removes H and X from adjacent carbons.
Exam Note: Alkyl halide plus alcoholic KOH gives alkene.
Question MCQ 64. Which of the following compounds possesses the C–H bond with the lowest bond dissociation energy? (A.I.I.M.S. 2003)
(a) Toluene (b) Benzene (c) n-Pentane (d) 2,2-Dimethylpropane
Solution. Correct option: (a) Toluene. The benzylic C–H bond gives the most stable radical (C6H5CH2·); stability order: C6H5CH2· > (CH3)3C· > CH3CH·CH2CH2CH3 > C6H5·, so toluene has the lowest bond dissociation energy.
Teacher's Note: More stable radical means lower bond dissociation energy.
Exam Note: Stable radical means weak C–H bond.
Question MCQ 65. The general formula CnH2nO2 could be for open chain (A.I.E.E.E. 2003):
(a) dialdehydes (b) diketones (c) carboxylic acids (d) diols
Solution. Correct option: (c) carboxylic acids. Saturated monocarboxylic acids (and esters) fit CnH2nO2; dialdehydes and diketones are CnH2n−2O2 and diols CnH2n+2O2.
Teacher's Note: Compare the hydrogen count of each class.
Exam Note: Check the H count for each class.
Question MCQ 66. Name of the compound given below (a skeletal zig-zag formula of an octane chain bearing a methyl group and an ethyl group, as drawn in the book) is (C.B.S.E. P.M.T. 2003):
(a) 4-ethyl-3-methyloctane (b) 3-methyl-4-ethyloctane (c) 2,3-diethylheptane (d) 5-ethyl-6-methyloctane
Solution. Correct option: (a) 4-ethyl-3-methyloctane. Answer as printed: numbering from the end nearest the first substituent gives locants {3,4}; ethyl is cited before methyl alphabetically.
Teacher's Note: Longest chain, lowest locants, alphabetical order.
Exam Note: Alphabetical order of substituents.
Question MCQ 67. Which of the following represents the given mode of hybridization sp2–sp2–sp–sp from left to right? (I.I.T. 2003)
(a) H2C=CH–C≡N (b) HC≡C–C≡CH (c) H2C=C=C=CH2 (d) H2C=CH–(cyclopropyl)
Solution. Correct option: (a) H2C=CH–C≡N. In H2C=CH–C≡N the carbons are sp2, sp2, sp and N is sp.
Teacher's Note: Double bonded carbon is sp2, triple bonded sp.
Exam Note: Match each atom to its multiple bond.
Question MCQ 68. Which of the following is the most stable cation? (J & K C.E.T. 2004)
(a) F3C–CH2+ (b) (CH3)2CH+ (c) CH3+ (d) CF3+
Solution. Correct option: (b) (CH3)2CH+. Carbocations are stabilised by the +I effect of CH3 groups and destabilised by the −I effect of F atoms, so (CH3)2CH+ is the most stable. Corrected: the answer key prints (a), but the book’s own explanation (and the options) give (b).
Teacher's Note: Alkyl groups stabilise, fluorines destabilise.
Exam Note: Secondary alkyl cation beats the rest.
Question MCQ 69. A molecule of urea can show (Kerala M.E.E. 2004):
(a) Chain isomerism (b) Position isomerism (c) Geometrical isomerism (d) Optical isomerism (e) Tautomerism
Solution. Correct option: (e) Tautomerism. Urea exists in a keto form (O=C(NH2)2) and an enol-type (isourea) form HO–C(=NH)NH2.
Teacher's Note: Tautomerism needs a mobile H next to a C=O or N.
Exam Note: Keto-enol type shift in urea.
Question MCQ 70. The IUPAC name of the compound (a cyclohexane ring with an OH group and two methyl groups on the same carbon, three carbons along the ring from the OH carbon) is (A.I.E.E.E. 2004):
(a) 1,1-dimethyl-3-cyclohexanol (b) 1,1-dimethyl-3-hydroxycyclohexane (c) 3,3-dimethyl-1-cyclohexanol (d) 3,3-dimethyl-1-hydroxycyclohexane
Solution. Correct option: (c) 3,3-dimethyl-1-cyclohexanol. The OH carbon is C-1 (principal group, lowest locant); the gem-dimethyl carbon is C-3: 3,3-dimethylcyclohexan-1-ol.
Teacher's Note: OH is the principal group, so it takes locant 1.
Exam Note: Alcohol suffix, ring numbered from OH.
Question MCQ 71. IUPAC name of CH2=CH–CH(CH2CH3)–C(Br)=CH2 is (Orissa J.E.E. 2004):
(a) 4-bromo-3-ethyl-1,4-pentadiene (b) 2-bromo-3-ethyl-1,4-pentadiene (c) 2-bromo-3-ethyl-1,5-pentadiene (d) none of these
Solution. Correct option: (b) 2-bromo-3-ethyl-1,4-pentadiene. The pentadiene chain is numbered from the end giving the double bonds {1,4}; Br is then on C-2 and ethyl on C-3.
Teacher's Note: Double bonds first, then substituents.
Exam Note: Lowest locants to double bonds first.
Question MCQ 72. The IUPAC name of CH3CH2C(Br)=CHCl is (C.P.M.T. 2004):
(a) 4-Chloro-3-bromobutene-3 (b) 2-Bromo-1-chlorobutene-1 (c) 2-Bromo-1-chloroebutene-1 (d) 2-Bromo-2-ethyl-3-chloropropene
Solution. Correct option: (c) 2-Bromo-1-chloroebutene-1. Chain of four carbons, C=C at C-1: 2-bromo-1-chlorobut-1-ene (the printed option has a typographical “chloroebutene”).
Teacher's Note: Double bond gets locant 1; halogens are prefixes.
Exam Note: Number from the end nearest the C=C.
Question MCQ 73. The IUPAC name of the compound (a skeletal formula of two ethyl-C(=O) groups joined through an oxygen atom, CH3CH2CO–O–COCH2CH3) is (J & K C.E.T. 2004):
(a) Propionic anhydride (b) Dipropanoic anhydride (c) Ethoxypropanoic acid (d) Propanoic anhydride
Solution. Correct option: (d) Propanoic anhydride. Each acyl group is propanoyl, so the symmetrical anhydride is propanoic anhydride.
Teacher's Note: Symmetrical anhydrides are named from the parent acid.
Exam Note: Name from parent acid plus anhydride.
Question MCQ 74. Tautomerism is not exhibited by (J & K C.E.T. 2004):
(a) p-benzoquinone (O=C6H4=O) (b) benzaldoxime (C6H5–CH=NOH) (c) cyclohexane-1,3,5-trione (d) cyclohexane-1,4-dione
Solution. Correct option: (a) p-benzoquinone (O=C6H4=O). The essential condition for tautomerism is an α-hydrogen on a saturated carbon attached to C=O, NO, NO2 etc., or a H on a heteroatom attached to a double bond. Option (a) has no α-hydrogen on a saturated carbon, so it does not exhibit tautomerism.
Teacher's Note: Look for a mobile H on a saturated carbon next to C=O.
Exam Note: No α-H on sp3 carbon, no tautomerism.
Question MCQ 75. Identify the correct statement from below concerning the structure of CH2=C=CH2 (Kerala M.E.E. 2004):
(a) The molecule is planar (b) One of the three carbon atoms is in an sp3-hybridised state (c) The molecule is non-planar with the two CH2 groups being in planar perpendicular to each other (d) All the carbon atoms are sp-hybridised (e) The molecule is bent with the –C–C–C– angle being 120°
Solution. Correct option: (c) The molecule is non-planar with the two CH2 groups being in planar perpendicular to each other. In allene the central sp carbon makes the two CH2 planes perpendicular to each other (a bent/orthogonal arrangement), so the molecule is non-planar.
Teacher's Note: Two perpendicular π bonds force perpendicular CH2 planes.
Exam Note: Allene is non-planar, not linear.
Question MCQ 76. Orbital interaction between the sigma bonds of a substituent group and the neighbouring pi-orbital is known as (Kerala M.E.E. 2004):
(a) hyperconjugation (b) inductive effect (c) steric effect (d) dipole-dipole interactions (e) electric quadruple interactions
Solution. Correct option: (a) hyperconjugation. This sigma-pi overlap is hyperconjugation (no-bond resonance).
Teacher's Note: Sigma-pi overlap is the definition of hyperconjugation.
Exam Note: Define: σ–π conjugation.
Additional Questions: Assertion-Reason Type Questions
Question Assertion-Reason Q.1. Assertion: C4H6 represents a bicycloalkane. Reason: The general formula of bicycloalkanes is CnH2n. [Options: (a) both true and Reason is the correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.]
Solution. Answer: (c). Assertion is true but reason is false: the general formula for bicycloalkanes is CnH2n−2.
Teacher's Note: Judge each statement separately, then ask whether the reason really explains the assertion.
Exam Note: Test each statement separately first.
Question Assertion-Reason Q.2. Assertion: But-1-ene and 2-methylprop-1-ene are position isomers. Reason: Position isomers have the same molecular formula but differ in the position of the functional group. [Options: (a) both true and Reason is the correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.]
Solution. Answer: (d). Assertion is false but reason is true: but-1-ene and 2-methylprop-1-ene are chain isomers (different carbon skeletons).
Teacher's Note: Judge each statement separately, then ask whether the reason really explains the assertion.
Exam Note: Test each statement separately first.
Question Assertion-Reason Q.3. Assertion: All the carbon atoms of but-2-ene lie in one plane. Reason: All the carbon atoms in but-2-ene are sp2-hybridised. [Options: (a) both true and Reason is the correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.]
Solution. Answer: (c). Assertion is true but reason is false: only the carbon atoms of the double bond in but-2-ene are sp2-hybridised (the two CH3 carbons are sp3). (A.I.I.M.S. 1994)
Teacher's Note: Judge each statement separately, then ask whether the reason really explains the assertion.
Exam Note: Test each statement separately first.
Question Assertion-Reason Q.4. Assertion: Alkanes having more than three carbon atoms exhibit chain isomerism. Reason: All carbon atoms in alkanes are sp-hybridised. [Options: (a) both true and Reason is the correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.]
Solution. Answer: (c). Assertion is true but reason is false: there is more than one way in which more than three carbon atoms can be connected; alkane carbons are sp3-hybridised.
Teacher's Note: Judge each statement separately, then ask whether the reason really explains the assertion.
Exam Note: Test each statement separately first.
Question Assertion-Reason Q.5. Assertion: Metamers can also be chain or position isomers. Reason: The term tautomerism was introduced by Laar to explain the chemical reactivity of a substance according to two possible structures. (A.I.I.M.S. 1999) [Options: (a) both true and Reason is the correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.]
Solution. Answer: (b). Both statements are true but the reason is not a correct explanation of the assertion. Correct explanation: due to the different number of carbon atoms and their arrangement on either side of the functional group, metamers can also be chain isomers or position isomers.
Teacher's Note: Judge each statement separately, then ask whether the reason really explains the assertion.
Exam Note: Test each statement separately first.
Question Assertion-Reason Q.6. Assertion: In CH2=C=CH2 all the carbon atoms are sp2-hybridised. Reason: All the carbon atoms are linked to each other by a double bond. [Options: (a) both true and Reason is the correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.]
Solution. Answer: (d). Assertion is false but reason is true. In CH2=C=CH2 the central carbon atom is sp-hybridised while the terminal ones are sp2-hybridised; the central carbon is linked to two sigma-bonds and two π-bonds.
Teacher's Note: Judge each statement separately, then ask whether the reason really explains the assertion.
Exam Note: Test each statement separately first.
Question Assertion-Reason Q.7. Assertion: Butane and 2-methylbutane are homologues. Reason: Butane is a straight chain alkane while 2-methylbutane is a branched chain alkane. [Options: (a) both true and Reason is the correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.]
Solution. Answer: (b). Both are true but the reason is not the correct explanation: they differ by a CH2 group (C4H10 and C5H12), which makes them homologues.
Teacher's Note: Judge each statement separately, then ask whether the reason really explains the assertion.
Exam Note: Test each statement separately first.
True/False Statements
Question True/False Q.1. 2,2-Dimethylbutane and 2-methylbutane are chain isomers of hexane. (Say whether true or false; rewrite false statements correctly.)
Solution. False. 2,2-Dimethylbutane and 2,3-dimethylbutane are chain isomers of hexane (2-methylbutane is C5H12).
Teacher's Note: Count carbons first: isomers must share the molecular formula.
Exam Note: State true or false, then correct the false one.
Question True/False Q.2. Acetylene is a tetrahedral molecule. (Say whether true or false; rewrite false statements correctly.)
Solution. False. Acetylene is a linear molecule.
Teacher's Note: sp-hybridised carbons give linear geometry.
Exam Note: State true or false, then correct the false one.
Question True/False Q.3. In benzene, carbon uses all the three p-orbitals for hybridization. (I.I.T. 1987) (Say whether true or false; rewrite false statements correctly.)
Solution. False. In benzene carbon uses only two of the three p-orbitals for hybridization (sp2).
Teacher's Note: Three sp2 orbitals use one s and two p orbitals; one p stays unhybridised.
Exam Note: State true or false, then correct the false one.
Question True/False Q.4. The members of a homologous series can be represented by a general formula. (Say whether true or false; rewrite false statements correctly.)
Solution. True.
Teacher's Note: A homologous series shares a general formula, e.g. CnH2n+2.
Exam Note: State true or false, then correct the false one.
Question True/False Q.5. Propanoic acid and methyl ethanoate are isomers. (Say whether true or false; rewrite false statements correctly.)
Solution. True (both C3H6O2).
Teacher's Note: Acid and ester with equal carbon count are functional isomers.
Exam Note: State true or false, then correct the false one.
Question True/False Q.6. Inductive effect involves displacement of σ-electrons. (Say whether true or false; rewrite false statements correctly.)
Solution. True.
Teacher's Note: Inductive effect polarises sigma bonds permanently.
Exam Note: State true or false, then correct the false one.
Question True/False Q.7. Electromeric effect is a permanent effect. (Say whether true or false; rewrite false statements correctly.)
Solution. False. Electromeric effect is a temporary effect.
Teacher's Note: Electromeric effect operates only in the presence of an attacking reagent.
Exam Note: State true or false, then correct the false one.
Question True/False Q.8. Simple carbanions are isoelectronic and isostructural with ammonia. (Say whether true or false; rewrite false statements correctly.)
Solution. True.
Teacher's Note: Carbanions and NH3 have 8 valence electrons around the central atom and pyramidal shape.
Exam Note: State true or false, then correct the false one.
Question True/False Q.9. Free radicals are produced by heterolytic fission of covalent bonds. (Say whether true or false; rewrite false statements correctly.)
Solution. False. Free radicals are produced by homolytic fission.
Teacher's Note: Homolysis gives radicals; heterolysis gives ions.
Exam Note: State true or false, then correct the false one.
Question True/False Q.10. Carbocations are planar species. (Say whether true or false; rewrite false statements correctly.)
Solution. True (sp2-hybridised, empty p-orbital perpendicular to the plane).
Teacher's Note: sp2 carbon with three bonds is planar at 120°.
Exam Note: State true or false, then correct the false one.
Fill in the Blanks
Question Fill in the Blanks Q.1. An atom or a group of atoms present in a molecule which largely determines its chemical properties is called the ........ group.
Solution. Functional.
Teacher's Note: The functional group fixes the family and reactions.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.2. The consecutive members of a homologous series differ by a ..... group.
Solution. CH2.
Teacher's Note: Each homologue adds one CH2 (14 u).
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.3. The IUPAC name of succinic acid is .... (I.I.T. 1994)
Solution. Butane-1,4-dioic acid.
Teacher's Note: Succinic acid is HOOC–CH2CH2–COOH.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.4. In methane, carbon exhibits .... hybridization and the four hybrid orbitals are inclined at angle of ....
Solution. sp3, 109°28′.
Teacher's Note: Four sigma bonds means sp3 and tetrahedral geometry.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.5. Chain isomerism arises due to different arrangements of the ....
Solution. Carbon chain.
Teacher's Note: Chain isomers differ only in the carbon skeleton.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.6. Resonance energy is a measure of extra stability conferred on the molecule due to .... of electrons.
Solution. Delocalization.
Teacher's Note: Resonance energy arises from electron delocalisation.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.7. Lewis structures which differ in the position of electrons and not in the position of atoms are called ....
Solution. Canonical or resonating structures.
Teacher's Note: Resonance contributors keep atom positions fixed.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.8. The real structure of benzene is a ....... of two ...... structures.
Solution. Resonance hybrid, Kekulé.
Teacher's Note: Benzene is a hybrid of two Kekulé structures, not an oscillation.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.9. The three isomers of xylene are called ..., ..., and ....
Solution. o-, m- and p-dimethylbenzenes.
Teacher's Note: Ortho, meta and para locants of the two methyl groups.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.10. Carbon-carbon bond length in benzene is .... which is intermediate between carbon-carbon single bond length of .... and carbon-carbon double bond length of ....
Solution. 139 pm, 154 pm, 134 pm.
Teacher's Note: Benzene bond order 1.5 gives an intermediate length.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.11. CH3CH2+ is ...... stable than CH3+ while CH3CH2− is ...... stable than CH3−.
Solution. More, less.
Teacher's Note: +I of CH3 stabilises cations, destabilises anions.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.12. BF3 is an ...... while NH3 is a ...... .
Solution. Electrophile, nucleophile.
Teacher's Note: BF3 has an empty orbital; NH3 has a lone pair.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.13. Hyperconjugation involves ...... conjugation while resonance involves ...... and ...... conjugation.
Solution. σ–π, π–π and n–π.
Teacher's Note: Hyperconjugation uses C–H sigma electrons.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.14. Cyanide has ..... effect while methyl group has .... effect.
Solution. −I effect, +I effect.
Teacher's Note: CN is electron-withdrawing; CH3 is electron-releasing.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.15. The products obtained by homolytic fission of covalent bond are called ....... .
Solution. Free radicals.
Teacher's Note: Radicals carry an unpaired electron.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.16. Heterolysis of benzyl chloride produces ..... and ...... .
Solution. Benzyl carbocation, chloride ion.
Teacher's Note: Heterolysis gives ions, and benzyl cation is resonance-stabilised.
Exam Note: Fill with the exact term.
Question Fill in the Blanks Q.17. Electromeric effect is a ...... effect in which ...... of electrons takes place from one atom to the other joined by a ...... bond.
Solution. Temporary, complete transfer, multiple.
Teacher's Note: Electromeric shift needs an attacking reagent.
Exam Note: Fill with the exact term.
Matching Type Questions
Question Matching Q.1-7. Match entries in Column I with those in Column II. Column I: 1. Homologues; 2. Isomers; 3. sp2-Hybridization; 4. Hyperconjugation; 5. Electrophile; 6. Carbanion; 7. Free radicals. Column II: (a) Benzene; (b) SnCl4; (c) σ–π conjugation; (d) Homolysis; (e) Methanol and ethanol; (f) Butane and isobutane; (g) Pyramidal.
Solution. 1–(e), 2–(f), 3–(a), 4–(c), 5–(b), 6–(g), 7–(d).
Teacher's Note: Homologues differ by CH2; isomers share a formula; SnCl4 is a Lewis acid; carbanions are pyramidal.
Exam Note: Match each term with its example or property.
Free study material for Chemistry
Class 11 Mathematics: Pradeep's KL Gogia Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 14 Organic Chemistry Some Basic Principles Part 3
Download Pradeep's KL Gogia Solutions for Class 11
Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 14 Organic Chemistry Some Basic Principles Part 3 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with Pradeep's KL Gogia Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Next Steps in Your Mathematics Revision
In addition to these Pradeep's KL Gogia Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.