Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 1 Some Basic Concepts In Chemistry Part 3

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Chemistry Chapter 01 Some Basic Concepts In Chemistry

Explore reliable textbook solutions for Chapter 01 Some Basic Concepts In Chemistry tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 01 Some Basic Concepts In Chemistry Textbook Solutions PDF

View or download the dedicated Chapter 01 Some Basic Concepts In Chemistry solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Some Basic Concepts In Chemistry - Part 3 (pages 63-92)

Practice Problems (contd.) - Section 1.36

Practice Problem 2. Calculate the volume of 1.00 mol L-1 aqueous sodium hydroxide that is neutralised by 200 mL of 2.00 mol L-1 aqueous hydrochloric acid and mass of sodium chloride produced. (N.C.E.R.T.)

Solution. Hint: M1V1 = M2V2, i.e. 1.0 × V1 = 2.0 × 200 (NaOH, HCl), so V1 = 400 mL. NaOH + HCl → NaCl + H2O. 200 mL of 2.0 M HCl contain (2.0/1000) × 200 = 0.4 mol. 1 mol HCl produces 1 mol NaCl, so 0.4 mol HCl gives 0.4 mol NaCl = 0.4 × 58.5 g = 23.4 g. Ans. 400 mL, 23.4 g

Teacher's Note: Neutralisation is 1:1, so equal moles of acid and base; use M1V1 = M2V2.

Exam Note: Give volume and mass of NaCl, with units.

Practice Problem 3. Bromine is prepared commercially by the reaction 2Br-(aq) + Cl2(aq) → 2Cl-(aq) + Br2(aq). Suppose we have 50.0 mL of 0.060 M solution of NaBr. What volume of 0.050 M solution of Cl2 is needed to react completely with the Br-?

Solution. Hint: 50 mL of 0.060 M NaBr contain (0.060/1000) × 50 = 0.003 mol Br-. 2 mol Br- react with 1 mol Cl2, so 0.003 mol Br- needs ½ × 0.003 = 0.0015 mol Cl2. 0.05 mol Cl2 is present in 1000 mL, so 0.0015 mol is present in (1000/0.05) × 0.0015 = 30 mL. Ans. 30 mL Cl2 solution

Teacher's Note: Use the 2 : 1 mole ratio from the equation first, then convert moles to volume using molarity.

Exam Note: Mole ratio from the balanced equation earns the key mark.

1.37 Limiting Reactant

Example 1.37.1. Zinc and hydrochloric acid react according to the reaction Zn(s) + 2HCl(aq) → ZnCl2(aq) + H2(g). If 0.30 mol Zn are added to hydrochloric acid containing 0.52 mol of HCl, how many moles of H2 are produced? (N.C.E.R.T.)

Solution. Thus, 1 mol of zinc reacts with 2 moles of HCl. 0.30 mol of zinc will react with HCl = 2 × 0.30 = 0.60 mol. But we have only 0.52 mol of HCl. Hence zinc cannot react completely and hence is not a limiting reactant. Again, 2 moles of HCl react with zinc = 1 mol, so 0.52 mol of HCl will react with zinc = ½ × 0.52 = 0.26 mol. As we have 0.30 mol of zinc, HCl will react completely, i.e. HCl is the limiting reactant. 2 moles of HCl produce H2 = 1 mol, so 0.52 mol of HCl = ½ × 0.52 mol = 0.26 mol of H2. Answer: 0.26 mol H2.

Teacher's Note: Find which reactant runs out first; the product amount is fixed by that limiting reactant.

Exam Note: State the limiting reactant explicitly before computing the product.

Example 1.37.2. 3.0 g of H2 react with 29.0 g of O2 to form H2O. (i) Which is the limiting reactant? (ii) Calculate the maximum amount of H2O that can be formed. (iii) Calculate the amount of the reactant left unreacted.

Solution. Molecular mass of H2 = 2.016. 2H2 + O2 → 2H2O, i.e. 4.032 g H2 + 32 g O2 → 36.032 g H2O. 3 g of H2 require O2 = (32/4.032) × 3 = 23.8 g. Thus O2 (29 g) is present in excess. Hence (i) H2 is the limiting reactant. (ii) H2O formed = (36.032/4.032) × 3 g = 26.8 g. (iii) O2 left unreacted = 29 - 23.8 = 5.2 g.

Teacher's Note: Compare the O2 needed for the given H2 with the O2 available to find the excess.

Exam Note: Excess reactant left = given minus used.

Example 1.37.3. One litre of oxygen at STP is made to react with three litres of carbon monoxide at STP. Calculate the mass of each substance found after the reaction. Which one is the limiting reactant?

Solution. The chemical equation is 2CO + O2 → 2CO2 (2 vol. + 1 vol. → 2 vol.). Step 1. To calculate the volume and mass of CO (at STP) left unused after the reaction: by Gay Lussac's Law, 1 vol. of O2 reacts with CO = 2 vol., so 1 litre of O2 will react with 2 litres of CO at STP. But the volume of CO taken = 3 litre at STP. Volume of CO left unused = 3 - 2 = 1 litre. Mass of 22.4 litres of CO at STP = 28 g, so mass of 1 litre of CO at STP = (28/22.4) × 1 = 1.25 g. Thus the mass of CO left unused = 1.25 g. Step 2. To calculate the volume and mass of CO2 formed from 1 litre of O2 at STP: 1 vol. of O2 produces CO2 = 2 vol., so 1 litre of O2 will produce 2 litres of CO2 at STP. Mass of 22.4 litres of CO2 at STP = 44 g, so mass of 2 litres = (44/22.4) × 2 = 3.928 g. Thus the mass of CO2 produced = 3.928 g. Step 3. As oxygen has been completely used up, oxygen is the limiting reactant.

Teacher's Note: Gas volumes at the same T and P are in the mole ratio, so use volume ratios directly.

Exam Note: Report masses of CO left and CO2 formed, then limiting reactant.

Problems for Practice - Section 1.37

Practice Problem 1 (Section 1.37). 500 cm3 of 0.250 M Na2SO4 solution added to an aqueous solution of 15.00 g of BaCl2 resulted in the formation of a white precipitate of BaSO4. How many moles and how many grams of BaSO4 are formed?

Solution. Hint: 500 cm3 of 0.25 M Na2SO4 = (0.25/1000) × 500 = 0.125 mol. 15 g BaCl2 = 15/208 mol = 0.072 mol. Na2SO4 + BaCl2 → BaSO4 + 2NaCl. Evidently, BaCl2 will be the limiting reactant. BaSO4 formed = 0.072 mol = 0.072 × 233 g = 16.776 g. Ans. 0.072 mole, 16.776 g

Teacher's Note: Compare moles of both reactants; the smaller (BaCl2) limits BaSO4.

Exam Note: Always identify the limiting reagent before computing yield.

Practice Problem 2 (Section 1.37). If 20.0 g of CaCO3 is treated with 20.0 g of HCl, how many grams of CO2 will be produced?

Solution. Hint: CaCO3 + 2HCl → CaCl2 + H2O + CO2; 100 g CaCO3 reacts with 2(1 + 35.5) = 73 g HCl and gives 44 g CO2. Here CaCO3 will be the limiting reactant (20 g CaCO3 needs only 14.6 g HCl). CO2 = (44/100) × 20 = 8.80 g. Ans. 8.80 g

Teacher's Note: Check HCl needed for 20 g CaCO3 (14.6 g) is less than 20 g, so CaCO3 limits.

Exam Note: Show the limiting-reagent check; then answer in grams.

Conceptual Questions

Conceptual Question 1. What physical quantities are represented by the following units and what are their most common names? (i) kg ms-2 (ii) kg m2 s-2 (iii) dm3

Solution. (i) Force (newton) (ii) Work (joule) (iii) Volume

Teacher's Note: Break each unit into its SI base units and compare with the formula of the quantity.

Exam Note: Give both quantity and its named SI unit.

Conceptual Question 2. Rewrite the following with required corrections: (i) The length of a rod is 10 cms. (ii) The work done by a system is 10 Joules.

Solution. (i) The length of a rod is 10 cm (s is not used). (ii) The work done by a system is 10 joules (small letter is used in place of capital letter).

Teacher's Note: SI unit symbols are never pluralised; unit names are written in lower case.

Exam Note: Symbols: no plural 's'; names in lower case.

Conceptual Question 3. Classify the following substances into elements, compounds and mixtures: (i) Milk (ii) 22-carat gold (iii) Iodized table salt (iv) Diamond (v) Smoke (vi) Steel (vii) Brass (viii) Dry ice (ix) Mercury (x) Air (xi) Aerated drinks (xii) Glucose (xiii) Petrol/Diesel/Kerosene oil (xiv) Steam (xv) Cloud.

Solution. Elements: (iv), (ix). Compounds: (viii), (xii), (xiv). Mixtures: (i), (ii), (iii), (v), (vi), (vii), (x), (xi), (xiii), (xv). Corrected: the book lists (xv) Cloud under compounds; a cloud is a colloidal mixture of water droplets in air, so it is a mixture.

Teacher's Note: Elements have one kind of atom; compounds have fixed composition; alloys, solutions and colloids are mixtures.

Exam Note: Justify each class briefly: single atom type, fixed ratio, or variable.

Conceptual Question 4. Why air is sometimes considered as a heterogeneous mixture?

Solution. This is due to the presence of dust particles which form a separate phase.

Teacher's Note: Heterogeneous means more than one visible phase; dust or droplets in air create one.

Exam Note: Mention dust particles forming a separate phase.

Conceptual Question 5. Why Law of conservation of mass should better be called as Law of conservation of mass and energy?

Solution. In nuclear reactions, it is observed that the mass of the products is less than the mass of the reactants. The difference of mass, called the mass defect, is converted into energy according to Einstein equation, E = Δm c2. Hence we better call it as a law of conservation of mass and energy.

Teacher's Note: Mass defect in nuclear reactions converts into energy via E = Δmc2.

Exam Note: Quote Einstein's equation and mass defect.

Conceptual Question 6. Is the law of constant composition true for all types of compounds? Explain why or why not.

Solution. No, law of constant composition is not true for all the compounds. It is true only for the compounds obtained from one isotope. For example, carbon exists in two common isotopes, 12C and 14C. When it forms CO2 from 12C, the ratio of masses is 12 : 32 = 3 : 8 but from 14C, the ratio will be 14 : 32 = 7 : 16 which is not same as in the first case.

Teacher's Note: Different isotopes of an element change the mass ratio in the compound.

Exam Note: Use the 12C and 14C CO2 example.

Conceptual Question 7. 1 L of a gas at S.T.P. weighs 1.97 g. What is the vapour density of the gas?

Solution. 22.4 L of the gas at S.T.P. will weigh = 1.97 × 22.4 = 44.1 g i.e. molecular mass = 44.1. Hence vapour density = 44.1/2 = 22.05.

Teacher's Note: Molar mass = mass of 22.4 L at STP; vapour density is half the molar mass.

Exam Note: Remember V.D. = M/2.

Conceptual Question 8. Why atomic masses are the average values?

Solution. Most of the elements exist in different isotopes i.e. atoms with different masses e.g. Cl has two isotopes with mass numbers 35 and 37 existing in the ratio 3 : 1. Hence average value is taken.

Teacher's Note: Natural samples contain isotopes in fixed proportions, so atomic mass is a weighted average.

Exam Note: Chlorine 35/37 (3:1) is the standard example.

Conceptual Question 9. Two bulbs B1 and B2 of equal capacity contain 10 g oxygen (O2) and ozone (O3) respectively. Which bulb will have greater number of O-atoms and which will have greater number of molecules?

Solution. 10 g O2 = 10/32 mole = (10/32) × 6.02 × 1023 molecules = 1.88 × 1023 molecules = 2 × 1.88 × 1023 atoms = 3.76 × 1023 atoms. 10 g O3 = 10/48 mole = (10/48) × 6.02 × 1023 molecules = 1.254 × 1023 molecules = 3 × 1.254 × 1023 atoms = 3.76 × 1023 atoms. Thus both contain the same number of atoms but bulb B1 contains more number of molecules.

Teacher's Note: Same mass of one element means the same number of atoms; molecules depend on atomicity.

Exam Note: Compare atoms and molecules separately.

Conceptual Question 10. Determine the equivalent weight of each of the following compounds assuming the formula weights of these compounds are x, y and z respectively. (i) Na2SO4 (ii) Na3PO4.12H2O (iii) Ca3(PO4)2 (M.L.N.R. Allahabad 1991)

Solution. Eq wt = Mol. wt/Total positive valency of metal atoms. (i) x/2 (ii) y/3 (iii) z/6.

Teacher's Note: Total positive charge: 2 Na = 2; 3 Na = 3; 3 Ca2+ = 6.

Exam Note: Count total cationic charge, not charge per ion.

Conceptual Question 11. Why are the atomic masses of most of the elements fractional?

Solution. This is because atomic masses are the relative masses of atoms as compared with an atom of C-12 isotope taken as 12.

Teacher's Note: Relative scale plus isotopic averaging give non-integer values.

Exam Note: Mention C-12 standard.

Conceptual Question 12. Write the formulae and names of three compounds containing same percentage composition of C, H and O.

Solution. Compounds with the same percentage composition of C, H and O will have the same empirical formula. The compounds with the empirical formula CH2O can be: HCHO (formaldehyde), CH3COOH (acetic acid), C6H12O6 (glucose).

Teacher's Note: Same percentage composition means the same empirical formula; multiples of CH2O qualify.

Exam Note: State empirical formula CH2O, then examples.

Very Short Answer Questions (1 mark)

Very Short Answer Question 1. What is the number of significant figures in 1.050 × 104?

Solution. four

Teacher's Note: Trailing zero after the decimal point is significant; the power of ten is not counted.

Exam Note: Count digits in 1.050 only.

Very Short Answer Question 2. What is the S.I. unit of density?

Solution. kg m-3

Teacher's Note: Density = mass/volume, so kg/m3 in SI.

Exam Note: Write as kg m-3.

Very Short Answer Question 3. What is AZT? To which use is it being put?

Solution. Azidothymidine used for AIDS victims.

Teacher's Note: AZT is an anti-HIV drug, an example of chemistry as a blessing.

Exam Note: Name and use in one line.

Very Short Answer Question 4. What is the law called which deals with the ratios of the volumes of the gaseous reactants and products?

Solution. Gay Lussac's law of gaseous volumes

Teacher's Note: Gas volumes combine in simple whole-number ratios at the same T and P.

Exam Note: Name the law exactly.

Very Short Answer Question 5. What is one a.m.u. or one 'u'?

Solution. 1 a.m.u. or 1 u = (1/12)th of the mass of an atom of carbon-12.

Teacher's Note: The atomic mass unit is defined using C-12 as the reference.

Exam Note: State fraction 1/12 and C-12.

Very Short Answer Question 6. Which isotope of carbon is used for getting relative atomic masses?

Solution. C-12

Teacher's Note: C-12 is assigned exactly 12 u and is the standard.

Exam Note: One-word answer: C-12.

Very Short Answer Question 7. Write down the empirical formula of acetic acid.

Solution. CH2O.

Teacher's Note: Acetic acid is C2H4O2; divide subscripts by 2.

Exam Note: Empirical formula is simplest ratio.

Very Short Answer Question 8. What is the S.I. unit of molarity?

Solution. mol dm-3.

Teacher's Note: Molarity is moles per litre; 1 L = 1 dm3.

Exam Note: Equivalent to mol L-1.

C.B.S.E.-P.M.T. (Mains) Special - A. Subjective Questions

PMT Question 1. What is the difference between the following? (i) 2.5 × 103 g and 2.50 × 103 g (ii) 160 cm and 160.0 cm.

Solution. (i) 2.5 × 103 has two significant figures while 2.50 × 103 has three significant figures. Hence 2.50 × 103 represents greater accuracy than 2.5 × 103. (ii) 160 has three significant figures while 160.0 has four significant figures. Hence 160.0 represents greater accuracy.

Teacher's Note: A trailing zero after a decimal point is significant and signals a finer measurement.

Exam Note: Count significant figures for each, then compare accuracy.

PMT Question 2. Which of the following has largest number of oxygen atoms? 1.0 g of O atoms, 1.0 g of O2, 1.0 g of ozone (O3). Justify your answer.

Solution. 1.0 g of O atoms = (1/16) g atoms of O = (1/16) × 6.02 × 1023 atoms = 6.02 × 1023/16 atoms. 1.0 g of O2 = (1/32) mol of O2 = (1/32) × 6.02 × 1023 molecules = 2 × (1/32) × 6.02 × 1023 atoms = 6.02 × 1023/16 atoms. 1.0 g of O3 = (1/48) mol of O3 = (1/48) × 6.02 × 1023 molecules = 3 × (1/48) × 6.02 × 1023 atoms = 6.02 × 1023/16 atoms. Thus, all of them contain equal number of atoms.

Teacher's Note: Equal mass of the same element means equal atoms regardless of how they are bonded.

Exam Note: Show the atom count for all three samples.

PMT Question 3. What is the difference in the molar volume of a gas if S.T.P. conditions are (i) 1 atm, 0 °C (ii) 1 bar, 0 °C?

Solution. (i) If S.T.P. conditions are 1 atm, 0 °C, molar volume = 22400 cm3. (ii) If S.T.P. conditions are 1 bar, 0 °C, molar volume = 22700 cm3.

Teacher's Note: Lower pressure (1 bar < 1 atm) gives a slightly larger molar volume.

Exam Note: Quote 22.4 L (1 atm) and 22.7 L (1 bar).

PMT Question 4. Why molality is preferred over molarity in expressing the concentration of a solution?

Solution. Molality is the number of moles of the solute present in 1 kg of the solvent whereas molarity is the number of moles of the solute present per litre of the solution. Thus, molality involves only masses which do not change with temperature whereas molarity involves volume which changes with temperature. Hence molality is preferred over molarity.

Teacher's Note: Mass is temperature-independent; volume expands or contracts with temperature.

Exam Note: Key phrase: molality does not change with temperature.

PMT Question 5. Taking N2 and O2 as main components of the air (79% N2, 21% O2 by volume) what is the molecular mass of air? How has it been arrived at?

Solution. For a mixture of gases, the average molecular mass is taken. Average molecular mass = ΣxiMi = xN2MN2 + xO2MO2, where xN2 and xO2 are mole fractions of N2 and O2 and MN2 and MO2 are their molecular masses. As equal volumes contain equal number of moles, therefore, their molar ratio is same as ratio of their volumes. So xN2 = 0.79, xO2 = 0.21. Also MN2 = 28 u, MO2 = 32 u. Average molecular mass = 0.79 × 28 + 0.21 × 32 = 22.12 + 6.72 = 28.84 u.

Teacher's Note: For gases, volume fraction equals mole fraction; take the weighted average of molar masses.

Exam Note: Show mole fractions, then weighted average: 28.84 u.

PMT Question 6. What is the difference between the mass of a molecule and gram molecular mass?

Solution. Mass of a molecule is the actual mass of a single molecule expressed in grams whereas gram molecular mass is the mass in gram of Avogadro's number of molecules.

Teacher's Note: One is per molecule (about 10-23 g); the other is per mole.

Exam Note: Contrast single molecule versus Avogadro number of molecules.

PMT Question 7. In the combustion of methane, what is the limiting reactant and why?

Solution. Methane is the limiting reactant because the other reactant is oxygen of the air which is always present in excess. Thus, the amounts of CO2 and H2O formed will depend upon the amount of CH4 burnt.

Teacher's Note: Air supplies abundant oxygen, so the fuel amount decides the products.

Exam Note: State methane limits since O2 is in excess.

PMT Question 8. What is the equivalent weight of KH(IO3)2 as an oxidant in presence of 4.0 (N) HCl when ICl becomes the reduced form? (K = 39.0, I = 127.0) (West Bengal J.E.E. 2001)

Solution. In KH(IO3)2, IO3- is present as IO3-. Oxidation state of I will be x - 6 = -1, or x = +5. KH(IO3)2 (+5) → 2ICl (+1). Decrease in oxidation state = +10 - 2 = 8. Equivalent wt. of KH(IO3)2 = Mol. wt./8 = (39 + 1 + 2(127 + 48))/8 = 390/8 = 48.75.

Teacher's Note: Two iodine atoms each drop from +5 to +1, giving 8 electrons per formula unit.

Exam Note: Eq. wt. = molar mass / electrons gained.

PMT Question 9. What is kg-mole? Find out the total number of electrons in a kg-mole of O2. (West Bengal J.E.E. 2004)

Solution. One kg-mole (or simply called one kilomole (kmol)) is the molecular mass of the substance expressed in kilograms. In CGS system, one gram mole of a substance contains Avogadro's number of particles (6.022 × 1023). In MKS system, one kg-mole of a substance contains Avogadro's number of particles but its value is 6.022 × 1026. Thus 1 kg-mole of O2 will contain 6.022 × 1026 molecules and hence 16 × 6.022 × 1026 electrons.

Teacher's Note: 1 kmol = 1000 mol; each O2 molecule has 16 electrons.

Exam Note: Number of electrons = 16 × N molecules.

C.B.S.E.-P.M.T. (Mains) Special - B. Problems

PMT Problem 1. Calculate the percentage of the naturally occurring isotopes 35Cl and 37Cl if the atomic mass of chlorine taken as 35.45.

Solution. Suppose 35Cl present = x%. Then 37Cl present = (100 - x)%. Average atomic mass = [x × 35 + (100 - x) × 37]/100 = 35.45 (given), or 35x + 3700 - 37x = 3545, or 2x = 155, or x = 77.5. This 35Cl = 77.5% and 37Cl = 100 - 77.5 = 22.5%.

Teacher's Note: Set up weighted-average equation with x and (100 - x) and solve.

Exam Note: Weighted average of isotopic masses equals atomic mass.

PMT Problem 2. Calculate the temperature at which the value in degrees celsius and degrees Fahrenheit is same.

Solution. The relationship between 0 °C and °F is °C = (5/9)(F - 32). If x °C = x °F, then x = (5/9)(x - 32), or 9x = 5x - 160, or 4x = -160, or x = -40 °C. Thus -40 °C = -40 °F.

Teacher's Note: Set C = F = x in the conversion formula and solve linearly.

Exam Note: Answer -40 on both scales.

PMT Problem 3. Convert 22.4 L into cubic metres.

Solution. 22.4 L = 22.4 L × (1000 cm3/1 L) × (1 m/100 cm) × (1 m/100 cm) × (1 m/100 cm) = (22.4 × 1000/(100 × 100 × 100)) m3 = 22.4 × 10-3 m3.

Teacher's Note: 1 L = 10-3 m3; use unit-factor method with the cubed length conversion.

Exam Note: Cube the length factor when converting volume.

PMT Problem 4. Calculate the molar mass of water if it contains 50% heavy water (D2O).

Solution. As water contains 50% D2O, this means that it contains ½ mole of H2O and ½ mole of D2O. Mass of ½ mole of H2O = ½ × 18 = 9 g. Mass of ½ mole of D2O = ½ × (2 × 2 + 16) = 10 g. Hence molar mass of the given sample of water = 9 + 10 = 19 g mol-1.

Teacher's Note: Treat as a 1:1 mole mixture and add the mole-weighted masses.

Exam Note: Average molar mass = sum of mole fraction times molar mass.

PMT Problem 5. The average molar mass of a mixture of methane (CH4) and ethene (C2H4) present in the ratio of a : b is found to be 20.0 g mol-1. If the ratio were reversed, what would be the molar mass of the mixture?

Solution. Molar mass of CH4 = 16 g mol-1; molar mass of C2H4 = 28 g mol-1. When they are present in the ratio a : b, their average molar mass = (a × 16 + b × 28)/(a + b) = 20 g mol-1 (given), i.e. 16a + 28b = 20(a + b), or 4a + 7b = 5(a + b), or a = 2b, or a/b = 2/1 = 2 : 1. If the ratio is reversed, now the ratio a : b = 1 : 2. Average molar mass = (1 × 16 + 2 × 28)/(1 + 2) = (16 + 56)/3 = 72/3 = 24 g mol-1.

Teacher's Note: Mole-ratio weighted average; first solve the ratio, then reverse it.

Exam Note: Weighted average molar mass with mole ratio as weights.

PMT Problem 6. 20.0 mL of a mixture of oxygen (O2) and ozone (O3) was heated till ozone was completely decomposed. The mixture on cooling was found to expand to 21 mL. Calculate the percentage of ozone by volume in the mixture.

Solution. Decomposition of ozone takes place as 2O3 → 3O2 (2 volume → 3 volume). Suppose ozone = x mL. Then O2 = (20 - x) mL. 2 mL of ozone on decomposition give O2 = 3 mL, so x mL of ozone on decomposition will give O2 = (3/2)x = 1.5x mL. Total volume of mixture after decomposition = 1.5x + (20 - x) mL = 20 + 0.5x = 21 (given), or 0.5x = 1, or x = 2 mL. Percentage of ozone in the mixture = (2/20) × 100 = 10%.

Teacher's Note: Each 2 volumes of O3 become 3 volumes of O2; the extra 1 mL gives x.

Exam Note: Volume increase = half the ozone volume.

PMT Problem 7. Calculate the atomicity of mercury molecules from the following data: (a) 10.0 g of mercury combine with 0.8 g of oxygen to form an oxide. (b) 500 mL of mercury vapour at S.T.P. weigh 4.465 g. (c) Specific heat of mercury is 0.033.

Solution. Calculation of equivalent mass: 0.8 g of oxygen combine with Hg = 10.0 g, so 8 g of oxygen will combine with Hg = (10/0.8) × 8 = 100 g. Equivalent mass of mercury = 100. Calculation of molar mass: 500 mL of mercury vapour at S.T.P. weigh 4.465 g, so 22400 mL will weigh = (4.465/500) × 22400 = 200 g. Molar mass of mercury = 200 g mol-1. Calculation of valency by Dulong and Petit's law: approx. atomic mass of mercury = 6.4/Sp. heat = 6.4/0.033 = 193.9. Valency of mercury = approx. atomic mass/Eq. mass = 193.9/100 ≈ 2 (as valency is a whole no.). Actual atomic mass = Eq. mass × valency = 100 × 2 = 200. Atomicity = Mol. mass/At. mass = 200/200 = 1. Thus, mercury molecules are monoatomic.

Teacher's Note: Chain: equivalent mass, Dulong-Petit approximate mass, valency, exact mass, then atomicity = molar mass/atomic mass.

Exam Note: Follow the standard sequence; end with monoatomic.

PMT Problem 8. Insulin contains 3.4% sulphur. Calculate the minimum molecular mass of insulin.

Solution. Minimum molecular mass of insulin will be the mass containing at least one atom of sulphur. One atom of S = 32 a.m.u. Now, 3.4 a.m.u. of sulphur is present in 100 a.m.u. of insulin. So 32 a.m.u. of sulphur will be present in insulin = (100/3.4) × 32 = 941.2 a.m.u. Hence minimum molecular mass of insulin = 941.2 a.m.u.

Teacher's Note: Minimum mass assumes exactly one sulphur atom per molecule.

Exam Note: State the one-atom assumption.

PMT Problem 9. How many molecules approximately do you expect to be present in (i) a small sugar crystal which weighs 10 mg (ii) one drop of water with 0.05 cc volume?

Solution. (i) 10 mg sugar (C12H22O11) = 0.01 g = 0.01/342 mole = 2.92 × 10-5 mole = (2.92 × 10-5) × (6.02 × 1023) = 1.76 × 1019 molecules. (ii) 0.05 cc water = 0.05 g = 0.05/18 mole = 2.78 × 10-3 mole = (2.78 × 10-3) × (6.02 × 1023) = 1.67 × 1021 molecules.

Teacher's Note: Mass to moles using molar mass (sugar 342, water 18), then multiply by NA.

Exam Note: Take density of water as 1 g/cc.

PMT Problem 10. 9.7 × 1017 atoms of iron weigh as much as 1 cc of H2 at S.T.P. What is the atomic mass of iron?

Solution. Mass of 1 cc of H2 at S.T.P. = 2.016/22400 = 9.0 × 10-5 g. Mass of 6.02 × 1023 atoms of Fe = (9.0 × 10-5 × 6.02 × 1023)/(9.7 × 1017) = 55.9 g. Atomic mass of Fe = 55.9 u.

Teacher's Note: Find the mass of 9.7 × 1017 atoms, then scale to one mole of atoms.

Exam Note: Mass of NA atoms in grams equals atomic mass in u.

PMT Problem 11. 20 cc of 1 N HCl, 30 cc of 0.5 N H2SO4 and 50 cc of 0.2 N HNO3 are mixed together. What will be the normality of the final solution?

Solution. 20 cc of 1 N HCl contains (1/1000) × 20 = 0.020 g eq. 30 cc of 0.5 N H2SO4 contains (0.5/1000) × 30 = 0.015 g eq. 50 cc of 0.2 N HNO3 contains (0.2/1000) × 50 = 0.01 g eq. Total no. of gram equivalents = 0.02 + 0.015 + 0.01 = 0.045. Total volume = 20 + 30 + 50 = 100 cc. Normality of the final solution = (0.045/100) × 1000 = 0.45 N.

Teacher's Note: Add gram equivalents of all acids, divide by total volume; no reaction occurs.

Exam Note: Total equivalents over total volume in litres.

PMT Problem 12. Crystalline magnesium sulphate becomes anhydrous on heating and loses 51.2% of its mass. Calculate the number of water molecules present.

Solution. 100 parts by mass of the hydrated salt contain 51.2 parts by mass of water. This means that (100 - 51.2) = 48.8 parts by mass of the anhydrous salt are associated with water = 51.2 parts by mass. Molecular mass of anhydrous MgSO4 = 24 + 32 + 64 = 120. So 120 parts of anhydrous MgSO4 will be associated with H2O = (51.2/48.8) × 120 = 125.9 parts = 125.9/18 molecules = 7 molecules.

Teacher's Note: Scale the water mass to one formula mass (120) of anhydrous salt, then divide by 18.

Exam Note: Answer: MgSO4.7H2O.

PMT Problem 13. 1.615 g of anhydrous ZnSO4 was placed in moist air. After a few days its mass was found to be 2.875 g. What is the molecular formula of the hydrated salt? (At. masses: Zn = 65.5, S = 32, O = 16).

Solution. Molecular mass of anhydrous ZnSO4 = 65.5 + 32 + 64 = 161.5. 1.615 g anhydrous ZnSO4 combine with H2O = 2.875 - 1.615 = 1.260 g. So 161.5 g anhydrous ZnSO4 will combine with H2O = 126 g = 126/18 = 7 moles. Hence the formula of the hydrated salt is ZnSO4.7H2O.

Teacher's Note: Mass gained is water; scale to one mole of salt and divide by 18.

Exam Note: Give the final formula with x = 7.

PMT Problem 14. 4 g carbon were heated with 8 g of sulphur. How much carbon disulphide (CS2) will be formed when the reaction is complete. What will be its percentage purity?

Solution. C + 2S → CS2 (12 g + 2 × 32 = 64 g → 76 g). Obviously sulphur will be the limiting reactant. 8 g sulphur will produce CS2 = (76/64) × 8 = 9.5 g. Carbon reacted = (12/64) × 8 = 1.5 g. Carbon left = 4 - 1.5 = 2.5 g. Total mass of products = 9.5 + 2.5 = 12 g. Percentage purity of CS2 in the product = (9.5/12) × 100 = 79.2%.

Teacher's Note: Leftover carbon contaminates the product, so purity is CS2 mass over total mass.

Exam Note: Limiting reagent first; purity = pure/total × 100.

PMT Problem 15. How many years would it take to spend Avogadro's number of rupees at the rate of 10 lakh rupees per second? (M.L.N.R. Allahabad 1990)

Solution. (6.02 × 1023/10,00,000) s = 6.02 × 1017 s = 6.02 × 1017/(60 × 60 × 24 × 365) = 1.9089 × 1010 years.

Teacher's Note: 10 lakh = 106; divide the count by rate, then convert seconds to years.

Exam Note: Convert seconds to years with 365 days.

PMT Problem 16. Gastric juice contains about 3.0 g of HCl per litre. If a person produces about 2.5 litre of gastric juice per day, how many antacid tablets each containing 400 mg of Al(OH)3 are needed to neutralize all the HCl produced in one day. (I.S.M. Dhanbad 1991)

Solution. HCl is neutralized by Al(OH)3 according to the equation Al(OH)3 + 3HCl → AlCl3 + 3H2O (27 + 3 × 17 = 78 g; 3 × 36.5 = 109.5 g). HCl produced from 2.5 litre of gastric juice = 3.0 × 2.5 = 7.5 g. 109.5 g HCl is neutralized by Al(OH)3 = 78 g, so 7.5 g HCl will be neutralized by Al(OH)3 = (78/109.5) × 7.5 g = 5.342 g = 5342 mg. Number of tablets required = 5342/400 = 13.35 i.e. 14 tablets.

Teacher's Note: Mole ratio 1 : 3; round the tablet count up since a fraction cannot be taken.

Exam Note: Round up to 14 tablets.

PMT Problem 17. What volume at N.T.P. of ammonia gas will be required to be passed into 30 mL of N H2SO4 solution to bring down the acid normality to 0.2 N? (M.L.N.R. 1991)

Solution. Normality is the number of milli-equivalents (Meq) per mL. Meq of 1 N H2SO4 present originally in 30 mL = 30 × 1 = 30. Meq of 0.2 N H2SO4 in 30 mL = 30 × 0.2 = 6. Meq of H2SO4 required to be neutralized by NH3 = 30 - 6 = 24. Meq of NH3 required to be passed = 24 (as acid and base react with each other in equivalent amounts). But 1 mole of NH3 = 1 g eq i.e. 1000 Meq of NH3 = 22400 mL at N.T.P. So 24 Meq of NH3 = (22400/1000) × 24 = 537.6 mL.

Teacher's Note: Equivalents of NH3 equal the equivalents of acid removed; 1 mol NH3 = 1 eq.

Exam Note: Volume of acid unchanged (assume); use Meq balance.

PMT Problem 18. Chlorine has two isotopes of atomic mass units 34.97 and 36.97. The relative abundances of these two isotopes are 0.755 and 0.245 respectively. Find the average atomic mass of chlorine. (B.I.T. Ranchi 1991)

Solution. Average atomic mass = (34.97 × 0.755 + 36.97 × 0.245)/(0.755 + 0.245) = 35.46.

Teacher's Note: Weighted mean of isotopic masses using relative abundances as weights.

Exam Note: Divide by the sum of abundances.

PMT Problem 19. A gas mixture of 3.0 litres of propane and butane on complete combustion at 25 °C produced 10 litres of CO2. Find out the composition of the gas mixture. (M.L.N.R. Allahabad 1992)

Solution. C3H8 + 5O2 → 3CO2 + 4H2O; C4H10 + 6½O2 → 4CO2 + 5H2O. Suppose propane = x L. Then butane = (3 - x) L. 1 L C3H8 gives 3 L of CO2 and 1 L C4H10 gives 4 L of CO2. Hence CO2 produced = 3x + 4(3 - x) = 12 - x. So 12 - x = 10 (given), hence x = 2 L i.e. propane = 2 L and butane = 1 L.

Teacher's Note: Gas volumes are proportional to moles; each litre of propane or butane gives 3 or 4 L CO2.

Exam Note: Write both combustion equations, then solve for x.

PMT Problem 20. The vapour density of a mixture of NO2 and N2O4 is 38.3 at 26.7 °C. Calculate the number of moles of NO2 in 100 g of the mixture. (M.L.N.R. 1993)

Solution. Suppose NO2 present in 100 g of the mixture = x g. Then N2O4 present in the mixture = (100 - x) g. Molar mass of NO2 = 14 + 32 = 46 g mol-1; molar mass of N2O4 = 92 g mol-1. Molar mass of mixture = 2 × V.D. = 2 × 38.3 = 76.6 g mol-1. Expressing all quantities in terms of moles, x/46 + (100 - x)/92 = 100/76.6, or 92x + 4600 - 46x = 5524.8, or 46x = 924.8, or x = 20.1 g. No. of moles of NO2 in the mixture = 20.1/46 = 0.437.

Teacher's Note: Total moles = 100 g / mean molar mass; split between NO2 and N2O4.

Exam Note: Molar mass = 2 × V.D.; set up mole equation.

PMT Problem 21. Naturally occurring Boron consists of two isotopes whose atomic weights are 10.01 and 11.01. The atomic weight of natural Boron is 10.81. Calculate the percentage of each isotope in natural Boron. (M.L.N.R. Allahabad 1994)

Solution. Suppose the percentage of isotope with atomic weight 10.01 = x. Then percentage of isotope with atomic weight 11.01 = 100 - x. Average atomic weight = [10.01x + (100 - x) × 11.01]/100 = (10.01x + 1101 - 11.01x)/100 = (1101 - x)/100 = 10.81, or 1101 - x = 1081, or x = 1101 - 1081 = 20. So percentage of isotope with atomic weight 10.01 = 20%; percentage of isotope with atomic weight 11.01 = 80%.

Teacher's Note: Weighted-average equation in x and (100 - x).

Exam Note: Report both percentages; they sum to 100.

PMT Problem 22. The mass of one litre of ozonised oxygen at N.T.P. was found to be 1.5 g. When 100 mL of this mixture at N.T.P. were treated with turpentine oil, the volume was reduced to 90 mL. Calculate the molecular mass of ozone. (M.L.N.R. 1996)

Solution. As ozone is absorbed by turpentine oil, therefore volume of ozone in 100 mL of the mixture = 100 - 90 = 10 mL. O2 in the mixture = 100 - 10 = 90 mL. As 1 L of the mixture = 1.5 g, therefore, average molar mass of mixture (mass of 22.4 L at S.T.P.) = 1.5 × 22.4 = 33.6 g mol-1. Ratio of ozone : oxygen in the mixture = 10 : 90. If m is the molecular mass of ozone, then average mol. mass of mixture = (10 × m + 90 × 32)/100 = 33.6 (calculated above), or m + 288 = 336 or m = 48.

Teacher's Note: Volume absorbed by turpentine is ozone; use volume fractions in the weighted average.

Exam Note: Volume fraction equals mole fraction for gases.

PMT Problem 23. One gram of a metal hydroxide on heating gives 5.6 g of metal oxide. Calculate the equivalent weight of the metal. (Bihar C.E.C.E. 2000)

Solution. Eq. wt. of metal hydroxide/Eq. wt. of metal oxide = Wt. of metal hydroxide/Wt. of metal oxide. So (E + 17)/(E + 8) = 7.4/5.6, or (E + 17) × 5.6 = (E + 8) × 7.4, or 1.8E = 36, or E = 20.

Teacher's Note: Hydroxide equivalent = E + 17, oxide equivalent = E + 8; masses are proportional to these.

Exam Note: Hydroxide equivalent is E + 17; oxide equivalent is E + 8.

PMT Problem 24. Calculate the molarity of water in pure water. (Bihar C.E.C.E. 2000)

Solution. 1 L of pure water = 1000 cm3 = 1000 g (assuming density = 1 g cm-3). No. of moles in 1 L of pure water = 1000/18 = 55.55. Molarity = 55.55 M.

Teacher's Note: Moles of water per litre using density 1 g/cm3.

Exam Note: Answer 55.55 mol/L.

PMT Problem 25. How many molecules are there in 10 litres of a gas at a pressure of 75 cm at 27 degree celsius? (Bihar C.E.C.E. 2000)

Solution. PV = nRT. n = PV/RT = [(750/760) × 10]/(0.0821 × 300) = 0.4 mole. No. of molecules present in 0.4 mole = (6.023 × 1023) × 0.4 = 2.409 × 1023.

Teacher's Note: Convert 75 cm Hg to atm (750 mm/760), T to kelvin, then use PV = nRT.

Exam Note: T = 300 K; R = 0.0821 L atm/(mol K).

PMT Problem 26. Potassium bromide, KBr contains 32.9% by mass of potassium. If 6.40 g of bromine reacts with 3.60 g of potassium, calculate the number of moles of potassium which combine with bromine to form KBr. (N.C.E.R.T.)

Solution. In KBr, 32.9 g of K are combined with 67.1 g of Br. So 3.6 g of K will combine with Br2 = (67.1/32.9) × 3.6 = 7.34 g, or 6.4 g of Br2 will combine with K = (32.9/67.1) × 6.4 = 3.14 g. Thus Br2 is the limiting reactant. K reacted = 3.14 g. KBr formed = (100/32.9) × 3.14 = 9.54 g = 9.54/(39 + 80) mol = 9.54/119 mol = 0.0802 mol. (Moles of K combined = 3.14/39 = 0.0805 mol, equal to the moles of KBr formed.)

Teacher's Note: Use the fixed K : Br mass ratio from the percentage composition to find the limiting reagent.

Exam Note: Identify the limiting reagent; moles of K = moles of KBr.

PMT Problem 27. Two acids H2SO4 and H3PO4 are neutralized separately by the same amount of an alkali when sulphate and dihydrogen orthophosphate are formed respectively. Find the ratio of the masses of H2SO4 and H3PO4 [P = 31]. (West Bengal J.E.E. 2003)

Solution. 1 g eq. of alkali (NaOH) will neutralize 1 g eq. of H2SO4 and 1 g eq. of H3PO4. For the given neutralization reactions (H2SO4 + 2NaOH → Na2SO4 + 2H2O; H3PO4 + NaOH → NaH2PO4 + H2O), equivalent mass of H2SO4 = Mol. mass/2 = 98/2 = 49, and equivalent mass of H3PO4 = Mol. mass/1 = 98. Hence the ratio of masses of H2SO4 and H3PO4 = 49 : 98 = 1 : 2.

Teacher's Note: Equal equivalents of alkali neutralise equal equivalents; here H3PO4 loses only one H+.

Exam Note: Basicity depends on H+ actually replaced.

PMT Problem 28. 10 ml of HCl solution gave 0.1435 g of AgCl when treated with excess of AgNO3. Find the normality of the acid solution [Ag = 108] (West Bengal J.E.E. 2003)

Solution. Cl present in 0.1435 g AgCl = (35.5/143.5) × 0.1435 g = 0.0355 g. HCl containing 0.0355 g Cl = (36.5/35.5) × 0.0355 g = 0.0365 g = 0.0365/36.5 g eq. = 0.001 g eq. i.e. 10 ml of HCl contain 0.001 g eq. So 1000 ml of HCl will contain = 0.1 g eq. i.e. normality = 0.1 N.

Teacher's Note: Each mole of AgCl corresponds to one mole of HCl, so moles of Cl equal equivalents of acid.

Exam Note: N = equivalents per litre; scale 10 mL to 1000 mL.

PMT Problem 29. To account for atomic mass of nitrogen as 14.0067, what should be the ratio of 15N and 14N atoms in natural nitrogen? (atomic mass of 14N = 14.00307 u and 15N = 15.001 u) (Bihar C.E.C.E. 2003)

Solution. Suppose % age of 14N = x. Then % age of 15N = 100 - x. According to the definition of average atomic mass, 14.0067 = [x × 14.00307 + (100 - x) × 15.001]/100, or 1400.67 = 1500.1 + x(14.00307 - 15.001) = 1500.1 - 0.99793x, or x = 99.43/0.99793 = 99.636, i.e. % age of 14N = 99.636 and % age of 15N = 100 - 99.636 = 0.364. Ratio of atoms of 15N and 14N = 0.364/99.636 = 1/273.73 = 1 : 273.73.

Teacher's Note: Weighted-average equation; then ratio of abundances of the two isotopes.

Exam Note: Report ratio 15N : 14N = 1 : 273.7.

I.I.T. (Mains) Special

IIT Problem 1. 1.0 g an alloy of aluminium and magnesium when treated with excess of dilute HCl form magnesium chloride and aluminium chloride and hydrogen collected over mercury at 0 °C has a volume of 1.20 L at 0.92 atmospheric pressure. Calculate the composition of the alloy.

Solution. Suppose Al in the alloy = x g. Then Mg in the alloy = (1 - x) g. 2Al + 6HCl → 2AlCl3 + 3H2 (2 × 27 = 54 g gives 3 × 22.4 L at S.T.P.); Mg + 2HCl → MgCl2 + H2 (24 g gives 22.4 L at S.T.P.). H2 produced from x g of Al = (3 × 22.4/54) × x = 22.4x/18 L at S.T.P. H2 produced from (1 - x) g of Mg = (22.4/24) × (1 - x) L at S.T.P. Total H2 produced at S.T.P. = 22.4x/18 + 22.4(1 - x)/24 L. Convert the actual volume of H2 produced to volume at S.T.P.: P1 = 0.92 atm, V1 = 1.20 L, T1 = 273 K; P2 = 1 atm, V2 = ?, T2 = 273 K. P1V1/T1 = P2V2/T2 gives 0.92 × 1.20 = V2, so V2 = 1.104 L. Hence 22.4x/18 + 22.4(1 - x)/24 = 1.104, or 4 × 22.4x + 3 × 22.4(1 - x) = 1.104 × 72, or 89.6x + 67.2 - 67.2x = 79.488, or 22.4x = 12.288, or x = 0.5486 g. So % of Al = 54.86 and % of Mg = 100 - 54.86 = 45.14. Corrected: the book prints % of Mg as 49.14, but 100 - 54.86 = 45.14.

Teacher's Note: Two metals give H2 in different proportions; reduce volume to STP first, then solve for x.

Exam Note: Convert 1.20 L at 0.92 atm to STP before using 22.4 L.

IIT Problem 2. A solid mixture (5.0 g) consisting of lead nitrate and sodium nitrate was heated below 600 °C until the weight of the residue was constant. If the loss in weight is 28.0 percent, find the amount of lead nitrate and sodium nitrate in the mixture. (I.I.T. 1990)

Solution. At 600 °C lead nitrate and sodium nitrate decompose as follows: 2Pb(NO3)2 → 2PbO + 4NO2 + O2; 2NaNO3 → 2NaNO2 + O2. Suppose Pb(NO3)2 in the mixture = x g. Then NaNO3 in the mixture = (5 - x) g. 1 mole of Pb(NO3)2 gives 1 mole of residue of PbO i.e. 207 + 62 × 2 = 331 g Pb(NO3)2 give residue of PbO = 207 + 16 = 223 g. So x g Pb(NO3)2 will give residue = (223/331) × x g. 1 mole of NaNO3 gives 1 mole of residue of NaNO2 i.e. 23 + 14 + 48 = 85 g NaNO3 give residue of NaNO2 = 23 + 14 + 32 = 69 g. So (5 - x) g NaNO3 give residue = (69/85) × (5 - x) g. Total residue = 223x/331 + 69(5 - x)/85 g. Loss in weight (given) = (28/100) × 5 g = 1.4 g. Residue left = 5 - 1.4 = 3.6 g. Hence 223x/331 + 69(5 - x)/85 = 3.6. On solving, we get x = 3.32 g, Pb(NO3)2 = 3.32 g, NaNO3 = 5 - 3.32 = 1.68 g.

Teacher's Note: Residue (PbO + NaNO2) equals 72% of 5 g; write the residue as a function of x.

Exam Note: Loss 28% means residue 3.6 g; solve one linear equation.

IIT Problem 3. A mixture of formic acid and oxalic acid is heated with conc H2SO4. The gas produced is collected and on its treatment with KOH solution, the volume of the gas decreased by 1/6 th. Calculate the molar ratio of the two acids in the original mixture. (Roorkee 1990)

Solution. Suppose no. of moles of formic acid is x and that of oxalic acid is y. Then HCOOH (conc. H2SO4) → H2O(l) + CO(g) (x mole gives x mole); (COOH)2 → CO(g) + CO2(g) + H2O(l) (y mole gives y mole of each). Total no. of moles of gaseous product = x + 2y. As only CO2 is absorbed by KOH, therefore fraction of CO2 = y/(x + 2y) = 1/6, or 6y = x + 2y, or 4y = x, or x/y = 4/1. Hence molar ratio of HCOOH to (COOH)2 is 4 : 1.

Teacher's Note: Only CO2 (from oxalic acid) is absorbed by KOH; its fraction fixes the ratio.

Exam Note: Write both dehydration reactions with conc. H2SO4.

IIT Problem 4. Calculate the number of oxalic acid molecules in 100 ml of 0.02 N oxalic acid solution. (Roorkee 1991)

Solution. 100 ml of 0.02 N oxalic acid solution = 0.002 g eq = 0.001 mole = 10-3 mole = 6.02 × 1020 molecules.

Teacher's Note: Oxalic acid is dibasic: 1 mole = 2 equivalents, so moles = eq/2.

Exam Note: Normality to moles needs n-factor 2.

IIT Problem 5. A 2.0 g sample of a mixture containing sodium carbonate, sodium bicarbonate and sodium sulphate is gently heated till the evolution of CO2 ceases. The volume of CO2 at 750 mm Hg pressure and at 298 K is measured to be 123.9 ml. A 1.5 g of the same sample requires 150 ml of M/10 HCl for complete neutralization. Calculate the percentage composition of the components of the mixture. (I.I.T. 1992)

Solution. Suppose Na2CO3 = x g, NaHCO3 = y g. Then Na2SO4 = 2 - (x + y) g. On heating only NaHCO3 will decompose to give CO2: 2NaHCO3 → Na2CO3 + H2O + CO2 (2 × 84 g gives 22400 ml at STP). y g NaHCO3 will give CO2 = (22400/168) × y ml at STP. Actual CO2 produced at STP: P1V1/T1 = P2V2/T2, i.e. 750 × 123.9/298 = 760 × V1/273, V1 = 112.0 ml. Hence (22400/168)y = 112, or y = 0.84 g. 1.5 g of the mixture requires M/10 HCl = 150 ml, so 2.0 g of the mixture will require HCl = (150/1.5) × 2.0 = 200 ml = 0.02 mole HCl. Na2CO3 + 2HCl → 2NaCl + H2O + CO2 (106 g needs 2 moles); NaHCO3 + HCl → NaCl + H2O + CO2 (84 g needs 1 mole). x g Na2CO3 require HCl = (2/106) × x mole; 0.84 g NaHCO3 require HCl = (1/84) × 0.84 mole = 0.01 mole. Hence 2x/106 + 0.01 = 0.02, or x = 0.53 g. % of Na2CO3 = (0.53/2) × 100 = 26.5%; % of NaHCO3 = (0.84/2) × 100 = 42.0%; % of Na2SO4 = 100 - (26.5 + 42.0) = 31.5%.

Teacher's Note: CO2 on heating gives NaHCO3; the HCl consumed then fixes Na2CO3; sulphate is the rest.

Exam Note: Reduce gas volume to STP; scale HCl volume to 2.0 g.

IIT Problem 6. Upon mixing 45.0 ml of 0.25 M lead nitrate solution with 25.0 ml of 0.10 M chromic sulphate solution, percipitation of lead sulphate takes place. How many moles of lead sulphate are formed? Also calculate the molar concentration of the species left behind in the final solution. Assume that lead sulphate is completely insoluble (At. wt. of Pb = 207.2). (I.I.T. 1993)

Solution. 3Pb(NO3)2 (3 moles) + Cr2(SO4)3 (1 mole) → 3PbSO4 + 2Cr(NO3)3. 45.0 ml of 0.25 M Pb(NO3)2 solution = (0.25/1000) × 45 mole of Pb(NO3)2 = 0.01125 mole. 25.0 ml of 0.10 M Cr2(SO4)3 solution = (0.1/1000) × 25 mole of Cr2(SO4)3 = 0.0025 mole. Evidently Cr2(SO4)3 will be the limiting reactant. 0.0025 mole Cr2(SO4)3 will react with Pb(NO3)2 = 3 × 0.0025 mole = 0.0075 mole. So Pb(NO3)2 left in the solution = 0.01125 - 0.0075 = 0.00375 mole. Total volume of the solution = 45 + 25 = 70 ml. Molar conc. of Pb(NO3)2 left in the sol. = (0.00375/70) × 1000 M = 0.05357 M. PbSO4 formed = 3 × 0.0025 = 0.0075 mol. Added (not printed in the book): Cr(NO3)3 formed = 2 × 0.0025 = 0.005 mol, i.e. (0.005/70) × 1000 = 0.0714 M.

Teacher's Note: Identify the limiting reagent, then compute leftover Pb(NO3)2 and the new Cr(NO3)3 in the 70 mL total.

Exam Note: Concentration uses total volume 70 mL after mixing.

IIT Problem 7. A mixture of ethane (C2H6) and ethene (C2H4) occupies 40 litres at 1.00 atm and at 400K. The mixture reacts completely with 130 g of O2 to produce CO2 and H2O. Assuming ideal gas behaviour, calculate the mole fractions of C2H4 and C2H6 in the mixture. (I.I.T. 1995)

Solution. Applying the ideal gas equation, PV = nRT: 1 atm × 40 L = n × 0.0821 L atm K-1 mol-1 × 400 K, or n = 40/(0.0821 × 400) = 1.218 mole (where n = total no. of moles of C2H6 and C2H4 in the mixture). Suppose the no. of moles of C2H6 in the mixture = x. Then the no. of moles of C2H4 in the mixture = 1.218 - x. Also 130 g O2 = 130/32 moles of O2 = 4.0625 moles. The reactions for complete combustion are 2C2H6 + 7O2 → 4CO2 + 6H2O ...(i) and C2H4 + 3O2 → 2CO2 + 2H2O ...(ii). From (i), no. of moles of O2 required for complete combustion of x moles of C2H6 = (7/2) × x = 3.5x. From (ii), no. of moles of O2 required for complete combustion of (1.218 - x) moles of C2H4 = 3(1.218 - x). Hence 3.5x + 3(1.218 - x) = 4.0625, or 0.5x = 4.0625 - 3.654 = 0.4085, or x = 0.8170 mole. Mole fraction of C2H6 = 0.817/1.218 = 0.67 and mole fraction of C2H4 = 1 - 0.67 = 0.33.

Teacher's Note: Total moles from PV = nRT; the O2 balance gives the second equation.

Exam Note: Ethane needs 3.5 mol O2, ethene needs 3 mol per mole.

IIT Problem 8. A mixture of 20 mL of CO, CH4 and N2 was burnt in excess of O2 resulting in the reduction of 13 mL of volume. The residual gas was then treated with KOH solution to show a contraction of 14 mL in volume. Calculate volume of CO, CH4 and N2 in the mixture. All measurements are made at constant pressure and temperature. (I.I.T. 1995)

Solution. Suppose volume of CO = a mL, CH4 = b mL and N2 = c mL. Then a + b + c = 20 mL ...(i). The combustion reactions will be CO + ½O2 → CO2; CH4 + 2O2 → CO2 + 2H2O(l); N2 + O2 → No reaction. Thus, a mL of CO will produce CO2 = a mL; b mL of CH4 will produce CO2 = b mL; N2 will remain as such i.e. = c mL. As CO2 is absorbed by KOH, decrease in volume on treating with KOH will be = a + b = 14 mL (given) ...(ii). The first given decrease is due to O2 consumed. a mL of CO will consume O2 = a/2 mL; b mL of CH4 will consume O2 = 2b mL. O2 consumed = a/2 + 2b = 13 mL (given) ...(iii). From eqns. (i) and (ii), c = 20 - 14 = 6 mL. From eqns. (ii) and (iii), a/2 + 2(14 - a) = 13, or (3/2)a = 15, or a = 10 mL. From eqn. (ii), 10 + b = 14, or b = 4 mL. CO = 10 mL, CH4 = 4 mL, N2 = 6 mL.

Teacher's Note: KOH removes CO2 (a + b); contraction on burning (water liquid) gives a second equation.

Exam Note: Three unknowns need three equations from volumes.

IIT Problem 9. One litre of a mixture of O2 and O3 at NTP was allowed to react with an excess of acidified solution of KI. The iodine liberated required 40 ml of M/10 sodium thiosulphate solution for titration. What is the weight percent of ozone in the mixture? Ultraviolet radiations of wavelength 300 nm can decompose ozone. Assuming that one photon can decompose one ozone molecule, how many photons would have been required for the complete decomposition of ozone in the original mixture? (I.I.T. 1997)

Solution. O3 → O2 + O. 2KI + H2SO4 + (O) → K2SO4 + H2O + I2; 2Na2S2O3 + I2 → Na2S4O6 + 2NaI. Overall: 2Na2S2O3 + 2KI + O3 + H2SO4 → O2 + K2SO4 + H2O + Na2S4O6 + 2NaI. 2 moles of Na2S2O3 react with one mole of O3. No. of moles of Na2S2O3 in 40 ml of M/10 Na2S2O3 = (1/10) × (1/1000) × 40 = 4 × 10-3 mole. So O3 reacted (present) = 2 × 10-3 mole. Volume of O3 = 2 × 10-3 × 22.4 L = 0.0448 L. Volume of O2 = 1 - 0.0448 = 0.9552 L. Weight of O3 = 2 × 10-3 × 48 = 0.096 g. Weight of O2 = (0.9552/22.4) × 32 = 1.3646 g. Weight of mixture = 0.096 + 1.3646 = 1.4606 g. % of O3 by weight = (0.096/1.4606) × 100 = 6.573%. No. of molecules in 2 × 10-3 mole of O3 = 2 × 10-3 × 6.022 × 1023 = 1.2044 × 1021. So no. of photons required = 1.2044 × 1021.

Teacher's Note: Iodometry: 1 mol O3 liberates 1 mol I2, which uses 2 mol thiosulphate.

Exam Note: Mole ratio O3 : thiosulphate = 1 : 2.

IIT Problem 10. 1.2 g mixture of Na2CO3 and K2CO3 was dissolved in water to form 100 cm3 of a solution. 20 cm3 of this solution required 40 cm3 of 0.1 N HCl for neutralisation. Calculate the weight of Na2CO3 and K2CO3 in the mixture. (Roorkee 1997)

Solution. Suppose weight of Na2CO3 in the mixture = x g. Weight of K2CO3 in the mixture = (1.2 - x) g. Eq. wt. of Na2CO3 = (46 + 12 + 48)/2 = 53; Eq. wt. of K2CO3 = (78 + 12 + 48)/2 = 69. No. of g eq. of Na2CO3 and K2CO3 in the mixture = x/53 + (1.2 - x)/69. 40 cc of 0.1 N HCl contain g eq. of HCl = (0.1/1000) × 40 = 4 × 10-3. Thus 20 cc of the mixture sol. neutralize HCl = 4 × 10-3 g eq. So 100 cc of the mixture sol. will neutralize HCl = (4 × 10-3/20) × 100 = 2 × 10-2 g eq = 0.02 g eq. As substances react in equivalent amounts, x/53 + (1.2 - x)/69 = 0.02, or 69x + 63.6 - 53x = 0.02 × 53 × 69 = 73.14, or 16x = 9.54, or x = 0.596 g. Thus Na2CO3 = 0.596 g and K2CO3 = 1.2 - 0.596 = 0.604 g.

Teacher's Note: Equivalents of the two carbonates add up to the equivalents of HCl; scale 20 cm3 to 100 cm3.

Exam Note: Eq. wt. of a carbonate = M/2.

IIT Problem 11. A sample of magnesium was burnt in air to give a mixture of MgO and Mg3N2. The ash was dissolved in 60 meq of HCl and the resulting solution back titrated with NaOH. 12 meq of NaOH were required to reach the end point. An excess of NaOH was then added and the solution distilled. The ammonia released was then trapped in 10 meq of second acid solution. Back titration of this solution required 6 meq of the base. Calculate the percentage of magnesium burnt to the nitride. (Roorkee 1998)

Solution. MgO + 2HCl → MgCl2 + H2O ...(i); Mg3N2 + 8HCl → 3MgCl2 + 2NH4Cl ...(ii). 12 meq of NaOH = 12 meq of HCl, i.e. HCl left unreacted = 12 meq. HCl used up by MgO and Mg3N2 = 60 - 12 = 48 meq = 48 millimoles. Suppose in the mixture, there are x millimoles of MgO and y millimoles of Mg3N2. Then 2x + 8y = 48 or x + 4y = 24. Further, NH4Cl + NaOH → NaCl + H2O + NH3. Acid used up by NH3 = 10 - 6 = 4 meq. NH3 produced = 4 millimoles or NH4Cl formed in reaction (ii) = 4 millimoles. This will be formed from Mg3N2 = 2 millimoles i.e. y = 2. Hence x + 4 × 2 = 24 or x = 16. 2Mg + O2 → 2MgO; 3Mg + N2 → Mg3N2. 16 millimoles of MgO are obtained from Mg = 16 millimoles. 2 millimoles of Mg3N2 are obtained from Mg = 6 millimoles. Total millimoles of Mg = 16 + 6 = 22. Hence Mg converted to Mg3N2 = (6/22) × 100 = 27.27%.

Teacher's Note: Back titration gives total HCl used; the NH3 trapped gives Mg3N2 directly.

Exam Note: Percent = moles Mg in nitride / total moles Mg.

IIT Problem 12. How many millilitres of 0.5 M H2SO4 are needed to dissolve 0.5 g of copper (II) carbonate? (At. mass: H = 1, C = 12, O = 16, S = 32, Cu = 63.5) (I.I.T. 1999)

Solution. CuCO3 + H2SO4 → CuSO4 + CO2 + H2O. 1 mole CuCO3 = 63.5 + 12 + 48 = 123.5 g requires H2SO4 = 1 mole. So 0.5 g CuCO3 will require H2SO4 = (1/123.5) × 0.5 mole = 1/247 mole. 0.5 mole of 0.5 M H2SO4 are present in 1000 ml, so 1/247 mole of 0.5 M H2SO4 will be present in (1000/0.5) × (1/247) ml = 8.1 ml.

Teacher's Note: 1 : 1 stoichiometry; moles of CuCO3 then volume from molarity.

Exam Note: Moles of acid equal moles of carbonate.

IIT Problem 13. A plant virus is found to consist of uniform cylindrical particles of 150 Å in diameter and 5000 Å long. The specific volume of the virus is 0.75 cm3/g. If the virus is considered to be a simple particle, find its molecular weight. (I.I.T. 1999)

Solution. Volume of one virus particle = πr2h = (22/7) × (150/2 × 10-8 cm)2 × (5000 × 10-8 cm) = 8.839 × 10-17 cm3. Mass of one virus particle = 8.839 × 10-17 cm3 × (1 g/0.75 cm3) = 11.785 × 10-17 g. Molar mass (i.e. mass of Avogadro's no. of particles) = (11.785 × 10-17 g) × (6.023 × 1023) = 7.098 × 107 g mol-1.

Teacher's Note: Cylinder volume gives mass via specific volume; multiply one-particle mass by NA.

Exam Note: 1 Å = 10-8 cm; radius is half the diameter.

IIT Problem 14. The formula weight of an acid is 82.0. In a titration 39.0 g of the acid per litre were completely neutralised by 95.0 cm3 of aqueous NaOH containing 40.0 g of NaOH per litre. What is the basicity of the acid? (Roorkee 2000)

Solution. Suppose the equivalent weight of acid = E. Normality of the acid solution = 39/E. Eq. wt. of NaOH = 40, so normality of NaOH solution = (40/40) N = 1 N. Applying N1V1 = N2V2 (acid)(NaOH): (39/E) × 100 = 1 × 95, or E = 41.0. Basicity of the acid = Formula wt./Eq. wt. = 82.0/41.0 = 2.

Teacher's Note: Basicity = formula weight / equivalent weight; get E from the titration equation.

Exam Note: Use 100 cm3 of acid against 95 cm3 of base.

IIT Problem 15. Calculate the molarity of water if its density is 1000 kg/m3. (I.I.T. 2003)

Solution. Molarity of water means number of moles of water in 1 litre of water. 1 L of water = 1000 cm3 = 1000 g (since d = 1 kg/m3 = 1 g/cm3). 1000 g H2O = 1000/18 moles = 55.56 moles.

Teacher's Note: Density 1000 kg/m3 = 1 g/cm3, so 1 L has 1000 g of water.

Exam Note: Answer 55.56 mol/L.

IIT Problem 16. A mixture of FeO and Fe3O4 was heated in air to a constant mass. It was found to gain 10% in its mass. Calculate the percentage composition of the original mixture. (West Bengal J.E.E. 2004)

Solution. On heating in air, both FeO and Fe3O4 are oxidized to Fe2O3 as follows: 2FeO + ½O2 → Fe2O3 (2(56 + 16) = 144 g gives 2 × 56 + 3 × 16 = 160 g); 2Fe3O4 + ½O2 → 3Fe2O3 (2(3 × 56 + 4 × 16) = 464 g gives 3 × 160 = 480 g). Suppose FeO in the mixture = x%. Then Fe3O4 in the mixture = (100 - x)%. Fe2O3 produced from x g of FeO = (160/144) × x g. Fe2O3 produced from (100 - x) g of Fe3O4 = (480/464) × (100 - x) g. Total Fe2O3 produced from 100 g of the mixture = 100 + 10 = 110 g. So 160x/144 + 480(100 - x)/464 = 110, or 10x/9 + 30(100 - x)/29 = 110, or 290x + 270(100 - x) = 110 × 9 × 29, or 20x = 1710, or x = 85.5. FeO present in the mixture = 85.5% and Fe3O4 = 100 - 85.5 = 14.5%.

Teacher's Note: Mass gain is oxygen uptake; write total Fe2O3 as 110 g of a 100 g sample.

Exam Note: Gain of 10% means final mass 110 g per 100 g.

Multiple Choice Questions

MCQ 1. The number of significant figures in 0.050 is (a) 1 (b) 2 (c) 3 (d) 4.

Solution. Answer: (b) 2. Leading zeros are not significant; digits 5 and the trailing 0 after it count.

Teacher's Note: Leading zeros only fix the decimal position; trailing zero after a non-zero digit is significant here.

Exam Note: Ignore leading zeros when counting.

MCQ 2. Which out of the following is not a homogeneous mixture? (a) Air (b) Brass (c) Solution of sugar in water (d) Smoke.

Solution. Answer: (d) Smoke. Smoke has solid particles dispersed in air and is heterogeneous; air, brass and sugar solution are uniform.

Teacher's Note: Smoke is a colloid: solid particles dispersed in gas, not uniform throughout.

Exam Note: Homogeneous means single uniform phase.

MCQ 3. A compound has the empirical formula C2H3O2. Its vapour density is 59. Its molecular formula will be (a) C2H3O2 (b) C4H6O4 (c) C6H9O6 (d) C8H12O8.

Solution. Answer: (b). Molecular mass = 2 × 59 = 118; empirical formula mass = 24 + 3 + 32 = 59; n = 118/59 = 2, so molecular formula = C4H6O4.

Teacher's Note: Molecular formula = n × empirical formula, with n = (2 × V.D.)/empirical mass.

Exam Note: Compute n first; then multiply subscripts.

MCQ 4. The number of molecules present in 8 g of oxygen gas are (a) 6.022 × 1023 (b) 3.011 × 1023 (c) 12.044 × 1023 (d) 1.55 × 1023.

Solution. Answer: (d). 8 g O2 = 8/32 = 0.25 mol = 0.25 × 6.022 × 1023 = 1.5055 × 1023 molecules, i.e. about 1.5 × 1023, nearest to option (d).

Teacher's Note: Oxygen gas is O2 with molar mass 32, not 16; moles times NA gives molecules.

Exam Note: Use O2 = 32 g/mol, not 16.

MCQ 5. 112 cm3 of hydrogen gas at STP contain (a) 0.005 mole (b) 0.01 mole (c) 0.02 g (d) 3.011 × 1022 molecules.

Solution. Answer: (a). 112 cm3/22400 cm3 = 0.005 mole (mass 0.01 g; 3.011 × 1021 molecules).

Teacher's Note: Moles = V(STP)/22400 cm3; check the other options by converting units.

Exam Note: 22400 cm3 per mole at STP.

MCQ 6. 10 g CaCO3 on reaction with 0.1 M HCl acid will produce CO2 (a) 1120 cm3 (b) 2240 cm3 (c) 112 cm3 (d) 224 cm3.

Solution. Answer: (b). CaCO3 + 2HCl → CaCl2 + H2O + CO2. 10 g CaCO3 = 0.1 mol gives 0.1 mol CO2 = 2240 cm3 at STP (the book's key assumes excess HCl; the volume of acid is not stated in the question).

Teacher's Note: 1 mol CaCO3 gives 1 mol CO2 when acid is in excess.

Exam Note: Excess acid assumed; carbonate decides CO2.

MCQ 7. One fermi is (a) 10-13 cm (b) 10-15 cm (c) 10-10 cm (d) 10-12 cm.

Solution. Answer: (a). 1 fermi = 10-15 m = 10-13 cm.

Teacher's Note: Fermi (femtometre) is 10-15 m; convert metres to centimetres.

Exam Note: Convert m to cm: multiply by 100.

MCQ 8. Which of the following has the largest number of atoms? (a) 0.5 g atom of Cu (b) 0.635 g of Cu (c) 0.25 moles of Cu atom (d) 1 g of Cu. (I.I.T. 1974)

Solution. Answer: (a). 0.5 g atom = 0.5 mol; 0.635 g = 0.01 mol; 0.25 mol; 1 g = 1/63.5 = 0.0157 mol. 0.5 mol is the largest.

Teacher's Note: Convert every option to moles; atoms are proportional to moles.

Exam Note: Compare all in moles.

MCQ 9. 27 g of Al (at mass = 27) will react with oxygen equal to (a) 24 g (b) 8 g (c) 40 g (d) 10 g. (I.I.T. 1978)

Solution. Answer: (a). 4Al + 3O2 → 2Al2O3: 4 × 27 = 108 g Al needs 96 g O2; so 27 g Al needs 24 g O2.

Teacher's Note: 4 : 3 mole ratio of Al to O2; 1 mol Al needs 0.75 mol O2.

Exam Note: Balance equation before using mole ratio.

MCQ 10. 2.76 g of silver carbonate (at mass of Ag = 108) on being heated strongly yields a residue weighing (a) 2.16 g (b) 2.48 g (c) 2.32 g (d) 2.64 g. (I.I.T. 1979)

Solution. Corrected: Answer (a) 2.16 g (the book's key marks (c)). Ag2CO3 → 2Ag + CO2 + ½O2 on strong heating. Molar mass = 276 g, so 2.76 g = 0.01 mol, giving 0.02 mol Ag = 0.02 × 108 = 2.16 g. (2.32 g would be Ag2O, formed only on mild heating.)

Teacher's Note: Strong heating decomposes silver carbonate fully to silver metal, not the oxide.

Exam Note: Residue is metallic silver on strong heating.

MCQ 11. If 0.5 mol of BaCl2 is mixed with 0.2 mol of Na3PO4, the maximum number of moles of Ba3(PO4)2 that can be formed is (a) 0.7 (b) 0.5 (c) 0.3 (d) 0.1. (I.I.T. 1981)

Solution. Answer: (d). 3BaCl2 + 2Na3PO4 → Ba3(PO4)2 + 6NaCl. 0.2 mol Na3PO4 needs 0.3 mol BaCl2 (available 0.5), so Na3PO4 is limiting and gives 0.2/2 = 0.1 mol Ba3(PO4)2.

Teacher's Note: Divide each mole amount by its coefficient; the smaller quotient identifies the limiting reagent.

Exam Note: Limiting reagent: smaller moles divided by coefficient.

MCQ 12. If 1021 molecules are removed from 200 mg of CO2, then the number of moles of CO2 left are (a) 2.88 × 10-3 (b) 1.66 × 10-3 (c) 4.54 × 10-3 (d) 1.66 × 10-2. (I.I.T. 1983)

Solution. Answer: (a). 200 mg = 0.2 g = 0.2/44 = 4.54 × 10-3 mol. 1021 molecules = 1021/(6.02 × 1023) = 1.66 × 10-3 mol. Left = 4.54 × 10-3 - 1.66 × 10-3 = 2.88 × 10-3 mol.

Teacher's Note: Convert both mass and molecule count to moles before subtracting.

Exam Note: Subtract in moles, not molecules.

MCQ 13. The number of gram molecules of oxygen in 6.02 × 1024 CO molecules is (a) 10 g molecules (b) 5 g molecules (c) 1 g molecule (d) 0.5 g molecule. (I.I.T. 1990)

Solution. Answer: (b). 6.02 × 1024 CO molecules = 10 mol CO, containing 10 mol O atoms = 5 mol O2 = 5 g molecules of oxygen.

Teacher's Note: Each CO has one O atom; 2 O atoms make one O2 gram molecule.

Exam Note: Convert atoms to O2 molecules by halving.

MCQ 14. One mole of CO2 contains (a) 6.02 × 1023 atoms of C (b) 6.02 × 1023 atoms of O (c) 18.1 × 1023 molecules of CO2 (d) 3 g atoms of CO2. (M.L.N.R. 1990)

Solution. Answer: (a). 1 mol CO2 has 6.02 × 1023 molecules, each with one C atom and two O atoms: C atoms 6.02 × 1023, O atoms 12.04 × 1023.

Teacher's Note: One mole of molecules has NA carbon atoms and 2NA oxygen atoms.

Exam Note: Count atoms per molecule first.

MCQ 15. Two elements X (atomic weight = 75) and Y (atomic weight = 16) combine to give a compound having 75.8% of X. The formula of the compound is (a) XY (b) X2Y (c) XY2 (d) X2Y3. (M.L.N.R. 1991)

Solution. Corrected: Answer (d) X2Y3 (the book's key marks (a)). X = 75.8%, Y = 24.2%. Moles of X = 75.8/75 = 1.01; moles of Y = 24.2/16 = 1.51. Ratio X : Y = 1.01 : 1.51 = 2 : 3. Formula = X2Y3.

Teacher's Note: Percentage divided by atomic weight gives mole ratio; scale to whole numbers.

Exam Note: Divide % by atomic mass; simplest whole-number ratio.

MCQ 16. The largest number of molecules is in (a) 54 g of nitrogen peroxide (b) 28 g of carbon dioxide (c) 36 g of water (d) 46 g of ethyl alcohol. (M.L.N.R. 1991)

Solution. Answer: (c). Moles: (a) 54 g of N2O5 = 0.5 mol (or 54 g of NO2 = 1.17 mol); (b) 28/44 = 0.64 mol; (c) 36/18 = 2 mol; (d) 46/46 = 1 mol. Water has the most moles.

Teacher's Note: Molecules are proportional to moles; water's low molar mass gives the most.

Exam Note: Convert each mass to moles.

MCQ 17. The molecular weight of O2 and SO2 are 32 and 64 respectively. If one litre of O2 at 15 °C and 750 mm contains N molecules, the number of molecules in two litres of SO2 under the same conditions of temperature and pressure will be (a) N/2 (b) N (c) 2N (d) 4N. (M.L.N.R. 1991)

Solution. Answer: (c). Equal volumes of different gases under the same conditions of temperature and pressure contain equal numbers of molecules (Avogadro's law), so 2 litres of SO2 contain 2N molecules.

Teacher's Note: Avogadro's law is independent of molar mass; volume doubles, so molecules double.

Exam Note: Same T and P: molecules proportional to volume.

MCQ 18. Five grams of each of the following gases are taken at 87 °C and 750 mm pressure. Which of them will have the least volume? (a) HF (b) HCl (c) HBr (d) HI. (M.L.N.R. 1991)

Solution. Answer: (d). 5 g HF = 5/20 mol, 5 g HCl = 5/36.5 mol, 5 g HBr = 5/81 mol, 5 g HI = 5/121 mol. Thus HI has least number of moles and hence least volume.

Teacher's Note: Equal masses: the heaviest molecule has the fewest moles and so the smallest volume.

Exam Note: Volume at fixed T, P is proportional to moles.

MCQ 19. Which one of the following is the standard for atomic mass? (a) 11H (b) 126C (c) 146C (d) 168O. (I.I.T. 1993)

Solution. Answer: (b). The carbon-12 isotope, 126C, is the standard; 1 u = 1/12 of the mass of one C-12 atom.

Teacher's Note: Modern atomic mass scale is based on C-12 = 12 u exactly.

Exam Note: C-12 replaced oxygen as the reference.

MCQ 20. Rearrange the following (I to IV) in the order of increasing masses and choose the correct answer from (a) (b) (c) and (d). Atomic masses: N = 14, O = 16, Cu = 63. I. 1 molecule of oxygen II. 1 atom of nitrogen III. 1 × 10-10 g molecular weight of oxygen IV. 1 × 10-10 g atomic weight of copper (a) II < I < III < IV (b) IV < III < II < I (c) II < III < I < IV (d) III < IV < I < II. (I.I.T. 1993)

Solution. Answer: (a). I: 32/(6.02 × 1023) = 5.3 × 10-23 g. II: 14/(6.02 × 1023) = 2.3 × 10-23 g. III: 10-10 mol × 32 g/mol = 3.2 × 10-9 g. IV: 10-10 mol × 63 g/mol = 6.3 × 10-9 g. Order: II < I < III < IV. Note: in the source scan the exponent in item IV looks like 10-18 (probably a misprint); with 10-18 the order would be II < I < IV < III, which is not among the options, so the key (a) matches the 10-10 reading used here.

Teacher's Note: Convert each to grams: single atom/molecule via NA; gram-molecular weights times given moles.

Exam Note: Convert everything to grams before comparing.

MCQ 21. The number of moles of H2 in 0.224 litres of hydrogen gas at STP (273 K, 1 atm) (assuming ideal gas behaviour) is (a) 1 (b) 0.1 (c) 0.01 (d) 0.001. (M.L.N.R. 1994)

Solution. Answer: (c). Moles = 0.224/22.4 = 0.01.

Teacher's Note: At STP one mole of ideal gas occupies 22.4 L.

Exam Note: Moles = volume / 22.4 L.

MCQ 22. Two containers P and Q of equal volume (1 litre each) contain 6 g of O2 and SO2 respectively at 300 K and 1 atmosphere. Then (a) No. of molecules in P is less than that in Q (b) No. of the molecules in Q is less than that in P (c) No. of molecules in P and Q are same (d) Either (a) or (b). (Haryana C.E.E.T. 1994)

Solution. Answer: (b). 6 g O2 = 6/32 mol; 6 g SO2 = 6/64 mol. Thus vessel Q has less no. of moles, hence fewer molecules.

Teacher's Note: With equal masses, the heavier gas SO2 has fewer moles.

Exam Note: Compare moles from equal masses.

MCQ 23. The maximum amount of BaSO4 precipitated on mixing BaCl2 (0.5 M) with H2SO4 (1 M) will correspond to (a) 0.5 M (b) 1.0 M (c) 1.5 M (d) 2.0 M. (A.I.I.M.S. 1997)

Solution. Answer: (a). BaCl2 + H2SO4 → BaSO4 + 2HCl (1 : 1). BaCl2 (0.5 M) is the limiting reactant, so the precipitate corresponds to 0.5 M.

Teacher's Note: 1 : 1 reaction; the smaller concentration (BaCl2) limits the product.

Exam Note: Product amount follows the limiting reagent.

MCQ 24. Given the numbers: 161 cm, 0.161 cm, 0.0161 cm. The number of significant figures for the three numbers are (a) 3, 4 and 5 respectively (b) 3, 3 and 3 respectively (c) 3, 3 and 4 respectively (d) 3, 4 and 4 respectively. (C.B.S.E. P.M.T. 1998)

Solution. Answer: (b). 161 has 3, 0.161 has 3 (leading zeros not counted) and 0.0161 has 3 significant figures.

Teacher's Note: Moving the decimal point does not change the number of significant figures.

Exam Note: Leading zeros are never significant.

MCQ 25. Haemoglobin contains 0.33% of iron by weight. The molecular weight of haemoglobin is approximately 67200. The number of iron atoms (at. wt. of Fe = 56) present in one molecule of haemoglobin is (a) 6 (b) 1 (c) 4 (d) 2. (C.B.S.E. P.M.T. 1998)

Solution. Answer: (c). Fe present in 67200 u = (0.33/100) × 67200 = 222 u = 222/56 = 4 atoms.

Teacher's Note: Mass of Fe per molecule = percentage times molecular mass; divide by 56.

Exam Note: Round 3.96 to the nearest whole 4.

MCQ 26. In the reaction 4NH3(g) + 5O2(g) → 4NO(g) + 6H2O(l), when 1 mole of ammonia and 1 mole of O2 are made to react to completion (a) 1.0 mole of H2O is produced (b) 1.0 mole of NO will be produced (c) all the oxygen will be consumed (d) all the ammonia will be consumed. (C.B.S.E. P.M.T. 1998)

Solution. Answer: (c). O2 will be the limiting reactant (1 mol NH3 needs 1.25 mol O2). Hence all oxygen will be consumed.

Teacher's Note: Divide moles by coefficients: O2 gives 1/5 = 0.2 against NH3 1/4 = 0.25.

Exam Note: Smaller moles/coefficient identifies the limiting reagent.

MCQ 27. The number of molecules in 16 g of methane is (a) 3.0 × 1023 (b) 6.02 × 1023 (c) (16/6.02) × 1023 (d) (16/3.0) × 1023. (M.P. P.M.T. 1998)

Solution. Answer: (b). 16 g CH4 = 16/16 = 1 mol = 6.02 × 1023 molecules.

Teacher's Note: Molar mass of CH4 is 16, so 16 g is exactly one mole.

Exam Note: One mole equals NA molecules.

MCQ 28. 50 ml of 10 N H2SO4, 25 ml of 12 N HCl and 40 ml of 5 N HNO3 were mixed together and the volume of the mixture was made 1000 ml by adding water. The normality of the resultant solution will be: (a) 1 N (b) 2 N (c) 3 N (d) 4 N. (P.M.T. 1998)

Solution. Answer: (a). N1V1 + N2V2 + N3V3 = N4V4: 10 × 50 + 12 × 25 + 5 × 40 = N4 × 1000, i.e. 1000 = N4 × 1000, so N4 = 1 N.

Teacher's Note: Total milliequivalents of all acids divided by the final volume in mL.

Exam Note: Add meq (N × V) then divide by 1000 mL.

MCQ 29. The number of atoms in 4.25 g of NH3 is approximately (a) 1 × 1023 (b) 2 × 1023 (c) 4 × 1023 (d) 6 × 1023. (C.B.S.E. P.M.T. 1999)

Solution. Answer: (d). 4.25 g NH3 = 4.25/17 mol = 0.25 mol = 0.25 × 6.022 × 1023 molecules; atoms = (1 + 3) × 0.25 × 6.022 × 1023 = 6.022 × 1023.

Teacher's Note: Multiply molecules by four atoms per NH3 molecule.

Exam Note: Count atoms per molecule: N + 3H = 4.

MCQ 30. A molal solution is one that contains 1 mole of a solute in (a) 1000 g of the solvent (b) one litre of the solvent (c) one litre of the solution (d) 22.4 litres of the solution. (M.P. C.E.E. 1999)

Solution. Answer: (a). Molality = moles of solute per 1000 g (1 kg) of solvent.

Teacher's Note: Molal relates to mass of solvent; molar relates to volume of solution.

Exam Note: Molality: per kg of solvent.

MCQ 31. A 100 ml solution of 0.1 N HCl was titrated with 0.2 N NaOH solution. The titration was discontinued after adding 30 ml of NaOH solution. The remaining titration was completed by adding 0.25 N KOH solution. The volume of KOH required for completing the titration is (a) 70 ml (b) 32 ml (c) 35 ml (d) 16 ml. (D.C.E. 1999)

Solution. Answer: (d). N1V1 = N2V2 + N3V3, i.e. 0.1 × 100 = 0.2 × 30 + 0.25 × V3, so V3 = (10 - 6)/0.25 = 16 ml.

Teacher's Note: Acid meq (10) minus NaOH meq already added (6) is the base still needed.

Exam Note: Subtract meq used, then divide by KOH normality.

MCQ 32. One mole of calcium phosphide on reaction with excess of water gives (a) one mole of phosphine (b) two moles of phosphoric acid (c) two moles of phosphine (d) one mole of phosphorus pentoxide. (I.I.T. 1999)

Solution. Answer: (c). Ca3P2 + 6H2O → 3Ca(OH)2 + 2PH3; one mole of Ca3P2 gives two moles of phosphine.

Teacher's Note: Ca3P2 contains two P atoms, so two PH3 form.

Exam Note: Balance the hydrolysis equation first.

MCQ 33. Assuming fully decomposed, the volume of CO2 released at STP on heating 9.85 g of BaCO3 (Atomic mass, Ba = 137) will be (a) 0.84 L (b) 2.24 L (c) 4.06 L (d) 1.12 L. (C.B.S.E. P.M.T. 2000)

Solution. Answer: (d). BaCO3 → BaO + CO2. Molar mass = 137 + 12 + 48 = 197 g. 9.85 g = 0.05 mol, giving 0.05 mol CO2 = 0.05 × 22.4 = 1.12 L.

Teacher's Note: One mole of BaCO3 releases one mole of CO2.

Exam Note: Moles of CO2 equal moles of carbonate.

MCQ 34. The specific heat of a metal is 0.16. Its approximate atomic weight would be (a) 32 (b) 16 (c) 40 (d) 64. (A.I.I.M.S. 2000)

Solution. Answer: (c). Approx. atomic weight = 6.4/Specific heat (Dulong and Petit's law) = 6.4/0.16 = 40.

Teacher's Note: Dulong-Petit: atomic mass × specific heat ≈ 6.4.

Exam Note: Quote the law; formula 6.4/specific heat.

MCQ 35. The weight of a molecule of the compound C60H122 is (a) 1.4 × 10-21 g (b) 1.09 × 10-21 g (c) 5.025 × 1023 g (d) 16.023 × 1023 g. (A.I.I.M.S. 2000)

Solution. Answer: (a). 1 mole of C60H122 = 60 × 12 + 122 × 1 = 842 g = 6.023 × 1023 molecules. Mass of one molecule = 842/(6.023 × 1023) = 1.4 × 10-21 g.

Teacher's Note: Mass of one molecule equals molar mass divided by Avogadro's number.

Exam Note: Molar mass 842 divided by NA.

MCQ 36. The number of water molecules present in a drop of water (volume 0.0018 ml) at room temperature is (a) 6.023 × 1019 (b) 1.084 × 1018 (c) 4.84 × 1017 (d) 6.023 × 1023. (D.C.E. 2000)

Solution. Answer: (a). 0.0018 ml H2O = 0.0018 g (d = 1 g ml-1) = 0.0018/18 = 10-4 mol = 10-4 × 6.023 × 1023 = 6.023 × 1019 molecules.

Teacher's Note: Density 1 g/mL converts volume to mass; then moles times NA.

Exam Note: Mass to moles to molecules.

MCQ 37. Which of the following contains maximum number of atoms? (a) 6.023 × 1021 molecules of CO2 (b) 22.4 L of CO2 at STP (c) 0.44 g of CO2 (d) None of these. (J.I.P.M.E.R. 2000)

Solution. Answer: (b). (a) 6.023 × 1021 molecules = 0.01 mol, 0.03 mol atoms; (b) 22.4 L at STP = 1 mol, 3 mol atoms; (c) 0.44 g = 0.01 mol, 0.03 mol atoms. So (b) has the most atoms.

Teacher's Note: Convert each option to moles of CO2; each molecule has three atoms.

Exam Note: Atoms = 3 × moles of CO2.

MCQ 38. Number of g of oxygen in 32.2 g Na2SO4.10H2O is (a) 20.8 (b) 22.4 (c) 2.24 (d) 2.08. (Haryana C.E.E.T. 2000)

Solution. Answer: (b). 1 mol Na2SO4.10H2O = 14 g atoms of O, i.e. 322 g Na2SO4.10H2O contain O = 224 g. So 32.2 g contain 22.4 g of oxygen.

Teacher's Note: Count all oxygen: 4 in sulphate plus 10 in water of crystallisation = 14 per formula unit.

Exam Note: Include oxygen of the water of crystallisation.

MCQ 39. The percentage of Se in peroxidase anhydrous enzyme is 0.5% by weight (atomic weight = 78.4). Then minimum molecular weight of peroxidase anhydrous enzyme is (a) 1.568 × 104 (b) 1.568 × 103 (c) 15.68 (d) 3.136 × 104. (C.B.S.E. P.M.T. 2001)

Solution. Answer: (a). 0.5% by weight means 0.5 g Se is present in 100 g of the enzyme. As at least one atom of Se must be present in the enzyme and atomic weight of Se = 78.4, therefore 1 g atom of Se i.e. 78.4 g will be present in enzyme = (100/0.5) × 78.4 g = 1.568 × 104 g.

Teacher's Note: Minimum molar mass assumes exactly one selenium atom per enzyme molecule.

Exam Note: Minimum mass: one atom of the rare element.

MCQ 40. The percentage of nitrogen in urea is about (a) 46 (b) 85 (c) 18 (d) 28. (K.C.E.T. 2001)

Solution. Answer: (a). NH2CONH2 (60 g/mol) contains 2 N atoms (28 g). % of N = (28/60) × 100 = 46%.

Teacher's Note: Urea has two nitrogen atoms; 28 of its 60 mass units.

Exam Note: Percent = (mass of N / molar mass) × 100.

MCQ 41. How much of NaOH is required to neutralise 1500 cm3 of 0.1 N HCl? (Na = 23) (a) 40 g (b) 4 g (c) 6 g (d) 60 g. (K.C.E.T. 2001)

Solution. Answer: (c). 1500 cm3 of 0.1 N HCl = (0.1/1000) × 1500 = 0.15 g eq. It will neutralise NaOH = 0.15 g eq = 0.15 × 40 g = 6 g.

Teacher's Note: Equivalents of base equal equivalents of acid; NaOH equivalent weight is 40.

Exam Note: Neutralisation: equal gram-equivalents.

MCQ 42. 10 dm3 of N2 gas and 10 dm3 of gas X at the same temperature and pressure contain the same number of molecules. The gas X is (a) CO (b) CO2 (c) H2 (d) NO. (K.C.E.T. 2001)

Solution. Answer: (a). No. of moles of N2 and X should be equal. This can be so if X has the same molecular weight as N2 (28); CO has molar mass 28. (The question as printed gives the same volume, so only equal mass would single out CO; the book's key and hint use equal molecular weight.)

Teacher's Note: Molar mass of CO equals N2 (28), which is why it is the intended answer.

Exam Note: Identify the gas with the same molar mass as N2.

MCQ 43. The volume of water to be added to 100 cm3 of 0.5 N H2SO4 to get decinormal concentration is (a) 100 cm3 (b) 450 cm3 (c) 500 cm3 (d) 400 cm3. (K.C.E.T. 2001)

Solution. Answer: (d). N1V1 = N2V2, i.e. 0.5 × 100 = 0.1 × V2, V2 = 500 cm3. Water to be added = 500 - 100 = 400 cm3.

Teacher's Note: Final volume from dilution equation; water added is final minus initial volume.

Exam Note: Subtract initial volume to get water added.

MCQ 44. The set of numerical coefficients that balances the equation K2CrO4 + HCl → K2Cr2O7 + KCl + H2O is (a) 1, 1, 2, 2, 1 (b) 2, 2, 1, 1, 1 (c) 2, 1, 1, 2, 1 (d) 2, 2, 1, 2, 1 (e) 2, 2, 2, 1, 1. (Kerala E.E.E. 2001)

Solution. Answer: (d). 2K2CrO4 + 2HCl → K2Cr2O7 + 2KCl + H2O (coefficients 2, 2, 1, 2, 1).

Teacher's Note: Balance Cr first (2 Cr in dichromate), then K, Cl, H and O.

Exam Note: Check atoms on both sides after balancing.

MCQ 45. 250 ml of a sodium carbonate solution contains 2.65 grams of Na2CO3. If 10 ml of this solution is diluted to one litre, what is the concentration of the resultant solution? (mol. wt. of Na2CO3 = 106) (a) 0.1 M (b) 0.001 M (c) 0.01 M (d) 10-4 M. (E.A.M.C.E.T. 2001)

Solution. Answer: (b). Molarity of given Na2CO3 solution = (2.65/106) × (1/250) × 1000 = 0.1 M. M1V1 = M2V2: 10 × 0.1 = 1000 × M2, so M2 = 0.001 M.

Teacher's Note: Compute the stock molarity first; the dilution factor from 10 mL to 1000 mL is 100.

Exam Note: Use M1V1 = M2V2 with consistent units.

MCQ 46. 7.5 grams of a gas occupy 5.6 litres of volume at STP. The gas is (a) NO (b) N2O (c) CO (d) CO2. (E.A.M.C.E.T. 2001)

Solution. Answer: (a). Mass of 22.4 L of gas at STP = (7.5/5.6) × 22.4 = 30 g, i.e. molecular mass of the gas = 30. Hence gas is NO.

Teacher's Note: Scale the mass to 22.4 L to get the molar mass, then match it to a gas.

Exam Note: Molar mass = mass of 22.4 L at STP.

MCQ 47. An aqueous solution of 6.3 g of oxalic acid dihydrate is made up to 250 ml. The volume of 0.1 N NaOH required to completely neutralise 10 ml of this solution is (a) 40 ml (b) 20 ml (c) 10 ml (d) 4 ml. (I.I.T. 2001)

Solution. Answer: (a). Normality of oxalic acid solution = (6.3/250) × (1000/63) = 0.4 N. N1V1 = N2V2: 10 × 0.4 = V × 0.1, V = 40 ml.

Teacher's Note: Equivalent weight of oxalic acid dihydrate is 126/2 = 63.

Exam Note: Equivalent weight of H2C2O4.2H2O is 63.

MCQ 48. How many moles of electron weigh one kilogram? (a) 6.023 × 1023 (b) (1/9.108) × 1031 (c) (6.023/9.108) × 1054 (d) 1/(9.108 × 6.023) × 108. (I.I.T. 2002)

Solution. Answer: (d). 1 mole of electrons weigh = (9.108 × 10-31) × (6.023 × 1023) kg = 9.108 × 10-31 × 6.023 × 1023 kg. So 1 kg of electrons = [1/(9.108 × 6.023)] × 108 mol.

Teacher's Note: Mass of a mole of electrons = electron mass times NA; invert for moles per kg.

Exam Note: Keep mass in kg to match the 1 kg given.

MCQ 49. The prefix 1018 is (a) giga (b) exa (c) kilo (d) nano (e) mega. (Kerala M.E.E. 2002)

Solution. Answer: (b) exa.

Teacher's Note: Giga is 109, mega 106, kilo 103, nano 10-9; exa is 1018.

Exam Note: Learn the SI prefix table in order.

MCQ 50. Number of atoms in 558.6 g Fe (molar mass = 55.86 g mol-1) (a) twice that in 60 g carbon (b) 6.023 × 1022 (c) half that of 8 g He (d) 558.6 × 6.023 × 1023. (A.I.E.E.E. 2002)

Solution. Answer: (a). 558.6 g Fe = 10 moles = 10 × 6.023 × 1023 atoms; 60 g C = 5 moles = 5 × 6.023 × 1023 atoms. Hence Fe has twice the atoms of 60 g carbon.

Teacher's Note: Convert masses to moles; atoms are proportional to moles.

Exam Note: 10 mol Fe versus 5 mol C.

MCQ 51. 3.92 g of ferrous ammonium sulphate are dissolved in 100 ml of water. 20 ml of this solution requires 18 ml of potassium permanganate during titration for complete oxidation. The weight of KMnO4 present in one litre of the solution is (a) 34.76 g (b) 12.38 g (c) 1.238 g (d) 3.476 g. (Tamil Nadu C.E.T. 2002)

Solution. Answer: (d). Eq. mass of ferrous ammonium sulphate = 392. Normality of the salt solution = (3.92/392) × (1000/100) = 0.1 N. 20 ml of 0.1 N salt sol. = 18 ml of KMnO4 sol., so normality of KMnO4 = (20 × 0.1)/18 = 1/9 N. Eq. mass of KMnO4 = 31.6. Strength of KMnO4 = (1/9) × 31.6 = 3.5 g L-1 approx. (Exact: 3.51 g/L; option (d) 3.476 g is the nearest.)

Teacher's Note: Fe(II) to Fe(III) is one electron; KMnO4 in acid takes five, so equivalent mass is M/5.

Exam Note: Strength = normality × equivalent mass.

MCQ 52. 3 g of an oxide of a metal is converted to chloride completely and it yielded 5 g of chloride. The equivalent weight of the metal is (a) 33.25 (b) 3.325 (c) 12 (d) 20. (K.C.E.T. 2002)

Solution. Answer: (a). (mass of metal oxide)/(mass of metal chloride) = (Eq. mass of metal + Eq. mass of oxide)/(Eq. mass of metal + Eq. mass of chloride) = 3/5 = (E + 8)/(E + 35.5). This gives E = 33.25.

Teacher's Note: Equivalent mass of oxide part is 8 and chloride part 35.5; ratio of masses equals ratio of totals.

Exam Note: Use anion equivalents 8 (oxide) and 35.5 (chloride).

MCQ 53. Among FeSO4.7H2O (A), CuSO4.5H2O (B), ZnSO4.7H2O (C), MnSO4.4H2O (D), isomorphous salts are (a) A and C (b) A and D (c) C and B (d) A and B. (D.P.M.T. 2003)

Solution. Answer: (a). Isomorphous salts have similar formula and crystal structure: FeSO4.7H2O and ZnSO4.7H2O (both with 7H2O and M2+).

Teacher's Note: Same number of water molecules and same cation valency give isomorphism.

Exam Note: Both heptahydrates of divalent metal sulphates.

MCQ 54. What will be the volume of the mixture after the reaction? NH3(g) (1 L) + HCl(g) (1.5 L) → NH4Cl(s) (a) 1.5 L (b) 0.5 L (c) 1 L (d) 0 L. (D.P.M.T. 2003)

Solution. Answer: (b). 1 L NH3(g) reacts with 1 L HCl(g) to form NH4Cl(s), which has negligible volume. Hence final volume will only be 0.5 L HCl.

Teacher's Note: The solid product occupies negligible volume; only excess HCl gas remains.

Exam Note: Solid products contribute no gas volume.

MCQ 55. A compound has haemoglobin like structure. It has one Fe. It contain 4.6% of Fe. The approximate molecular mass is (a) 100 g mol-1 (b) 1200 g mol-1 (c) 1400 g mol-1 (d) 1600 g mol-1. (D.P.M.T. 2003)

Solution. Answer: (b). 1 g atom of Fe (56 g Fe) is present in 1 mole of the compound. As 4.6 g of Fe is present in 100 g of the compound, 56 g of Fe will be present in (100/4.6) × 56 g = 1217 g of the compound. Hence approximate molecular mass = 1200.

Teacher's Note: One Fe atom per molecule: 56 g is 4.6% of the molar mass.

Exam Note: Molar mass = atomic mass × 100 / percentage.

MCQ 56. In Haber process, 30 litres of dihydrogen and 30 litres of dinitrogen were taken for reaction which yielded only 50% of the expected product. What will be the composition of the gaseous mixture under the aforesaid condition in the end? (a) 20 litres NH3, 25 litres N2, 20 litres H2 (b) 10 litres NH3, 25 litres N2, 15 litres H2 (c) 20 litres NH3, 10 litres N2, 30 litres H2 (d) 20 litres NH3, 25 litres N2, 15 litres H2. (C.B.S.E. P.M.T. 2003)

Solution. Answer: (b). N2(g) + 3H2(g) ⇌ 2NH3(g). 1 L of N2 reacts with 3 L of H2 to form 2 L of NH3. Thus H2 is the limiting reactant: 30 L H2 would react with 10 L N2 to form 20 L NH3. As actual yield is 50% of the expected value, NH3 formed = 10 L, N2 reacted = 5 L, H2 reacted = 15 L. Mixture will contain 10 L NH3, 25 L N2, 15 L H2. (The book's hint calls N2 the limiting reactant; the working shows H2 is limiting since it is consumed at three times the rate. The final answer is unchanged.)

Teacher's Note: Hydrogen limits (30 L needs only 10 L N2); halve the expected yield and subtract consumption.

Exam Note: Gas volumes follow mole ratio 1 : 3 : 2.

MCQ 57. What volume of hydrogen gas at 273 K and 1 atm pressure will be consumed in obtaining 21.6 g elemental boron (atomic mass = 10.8) from the reduction of boron trichloride by hydrogen? (a) 67.2 L (b) 44.8 L (c) 22.4 L (d) 89.6 L. (A.I.E.E.E. 2003)

Solution. Answer: (a). 2BCl3 + 3H2 → 2B + 6HCl: 3 × 22.4 L = 67.2 L H2 gives 2 × 10.8 = 21.6 g B.

Teacher's Note: 21.6 g of boron is exactly 2 mol, needing 3 mol of H2.

Exam Note: Mole ratio B : H2 = 2 : 3.

MCQ 58. Which has maximum number of atoms? (a) 24 g of C (12) (b) 56 g of Fe (56) (c) 27 g of Al (27) (d) 108 g of Ag (108). (I.I.T. 2003)

Solution. Answer: (a). 24 g C = 24/12 = 2 mol = 2 × N0 atoms; 56 g Fe = 1 mol; 27 g Al = 1 mol; 108 g Ag = 1 mol = N0 atoms.

Teacher's Note: Atoms are proportional to moles; carbon has the lowest atomic mass here.

Exam Note: Convert masses into moles of atoms.

MCQ 59. Mixture X = 0.02 mol of [Co(NH3)5SO4]Br and 0.02 mol of [Co(NH3)5Br]SO4 was prepared in 2 litre of solution. 1 litre of mixture X + excess AgNO3 → Y; 1 litre of mixture X + excess BaCl2 → Z. Number of moles of Y and Z are (a) 0.01, 0.01 (b) 0.02, 0.01 (c) 0.01, 0.02 (d) 0.02, 0.02. (I.I.T. 2003)

Solution. Answer: (a). Mixture X will contain 0.02 mol Br- ions and 0.02 mol SO42- ions in 2 L solution (only the ionisable ones). Hence 1 L of mixture X will contain 0.01 mol Br- and 0.01 mol SO42- ions. With excess of AgNO3, 0.01 mol of AgBr i.e. Y is formed. With excess of BaCl2, 0.01 mol of BaSO4 i.e. Z is formed.

Teacher's Note: Only free (ionisable) Br- and SO42- outside the coordination sphere precipitate.

Exam Note: Ligands inside the coordination sphere do not precipitate.

MCQ 60. The maximum number of molecules is present in (a) 15 L of H2 gas S.T.P. (b) 5 L of N2 gas at S.T.P. (c) 0.5 g of H2 gas (d) 10 g of O2 gas. (C.B.S.E. P.M.T. 2004)

Solution. Answer: (a). At STP 22.4 L of any gas = 6.02 × 1023 molecules. 15 L H2 = (6.02 × 1023/22.4) × 15 = 4.03 × 1023; 5 L N2 = 1.344 × 1023; 0.5 g H2 = (6.02 × 1023/2) × 0.5 = 1.505 × 1023; 10 g O2 = (6.02 × 1023/32) × 10 = 1.88 × 1023.

Teacher's Note: Convert every option to moles; molecules are proportional to moles.

Exam Note: Compare all in molecules or moles.

MCQ 61. 4 g of copper was dissolved in concentrated nitric acid. The copper nitrate on strong heating gave 5 g of its oxide. The equivalent weight of copper is (a) 23 (b) 32 (c) 12 (d) 20. (Karnataka C.E.T. 2004)

Solution. Answer: (b). Cu = 4 g, CuO = 5 g, so oxygen = 1 g. Thus 1 g oxygen combines with Cu = 4 g. 8 g oxygen will combine with Cu = 4 × 8 = 32 g. Eq. wt. of Cu = 32.

Teacher's Note: Equivalent weight is the mass of metal combining with 8 g of oxygen.

Exam Note: Scale the oxygen to 8 g.

MCQ 62. Dulong and Petit's law is valid only for (a) metals (b) non-metals (c) gaseous elements (d) solid elements. (Karnataka C.E.T. 2004)

Solution. Answer: (d) solid elements.

Teacher's Note: The law (atomic mass × specific heat ≈ 6.4) fails for light elements such as Be, B, C, Si.

Exam Note: State valid for solid elements only.

MCQ 63. Number of atoms of oxygen present in 10.6 g Na2CO3 will be (a) 6.02 × 1022 (b) 12.04 × 1022 (c) 1.806 × 1023 (d) 31.80 × 1028. (J & K C.E.T. 2004)

Solution. Answer: (c). Molar mass of Na2CO3 = 2 × 23 + 12 + 3 × 16 = 106 g mol-1. 10.6 g Na2CO3 = 0.1 mol = 0.1 × 6.02 × 1023 molecules = 3 × 0.1 × 6.02 × 1023 atoms of O = 1.806 × 1023.

Teacher's Note: Three oxygen atoms per formula unit; multiply moles by three and NA.

Exam Note: Count three O atoms per Na2CO3.

MCQ 64. One gram mole of a gas at NTP occupies 22.4 litres. This fact was derived from (a) Law of gaseous volumes (b) Avogadro's hypothesis (c) Berzelius hypothesis (d) Dalton's atomic theory. (J & K C.E.T. 2004)

Solution. Answer: (b). Avogadro's hypothesis; the molar volume follows from equal volumes containing equal numbers of molecules.

Teacher's Note: Avogadro's hypothesis links equal volumes to equal molecule numbers, hence a fixed molar volume.

Exam Note: Name Avogadro's hypothesis, not Gay Lussac's law.

MCQ 65. Which of the following contains maximum number of molecules? (a) 100 cc of CO2 at STP (b) 150 cc of N2 at STP (c) 50 cc of SO2 at STP (d) 150 cc of O2 at STP (e) 200 cc of NH3 at STP. (Kerala C.E.E. 2004)

Solution. Answer: (e). 22400 cc of any gas at STP contains the same number of molecules, i.e. 6.02 × 1023. Hence larger the volume at STP, greater is the number of molecules; 200 cc of NH3 is the largest volume.

Teacher's Note: At STP, molecules are proportional to volume regardless of the gas.

Exam Note: Largest volume at STP means most molecules.

MCQ 66. A sample of phosphorus trichloride (PCl3) contains 1.4 moles of the substance. How many atoms are there in the sample? (a) 4 (b) 5.6 (c) 8.431 × 1023 (d) 3.372 × 1024 (e) 2.409 × 1024. (Kerala M.E.E. 2004)

Solution. Answer: (d). 1 mole of PCl3 contains 4 × 6.02 × 1023 atoms. 1.4 moles will contain 3.372 × 1024 atoms.

Teacher's Note: Each PCl3 molecule has four atoms (1 P + 3 Cl).

Exam Note: Atoms = moles × atoms per molecule × NA.

MCQ 67. A gas mixture contains 50% helium and 50% methane by volume. What is the percent by weight of methane in the mixture? (a) 19.97% (b) 20.05% (c) 50% (d) 75% (e) 80.03%. (Kerala M.E.E. 2004)

Solution. Answer: (e). Equal volumes contain equal number of moles. Hence molar ratio of He : CH4 = 1 : 1, so ratio by weight = 4 : 16 = 1 : 4. CH4 present by weight = (4/5) × 100 = 80% (about 80.03% with exact atomic masses).

Teacher's Note: Equal volumes mean equal moles, so mass ratio equals molar mass ratio.

Exam Note: Volume % equals mole % for gases.

MCQ 68. 116 mg of a compound on vaporisation in a Victor Meyer's apparatus displaces 44.8 ml of air measured at STP. The molecular weight of the compound is (a) 116 (b) 232 (c) 58 (d) 44.8 (e) 46.4. (Kerala M.E.E. 2004)

Solution. Answer: (c). 22400 ml of air at STP will be displaced by (0.116/44.8) × 22400 g = 58 g.

Teacher's Note: Volume of air displaced equals vapour volume; scale mass to 22400 mL.

Exam Note: Molar mass = mass of 22400 mL vapour at STP.

MCQ 69. 1 ml of water has 20 drops and A is Avogadro's number, the number of water molecules in the drop of water, is (a) 0.5A/18 (b) 0.05A (c) 0.5A (d) 0.05A/18. (U.P. C.P.M.T. 2004)

Solution. Answer: (d). 1 drop of water = 1/20 ml = (1/20) g (dH2O = 1 g ml-1). 18 g of water = A molecules, so (1/20) g water = (A/18) × (1/20) = 0.05A/18 molecules.

Teacher's Note: One drop is 1/20 mL; with density 1 g/mL, mass is 0.05 g.

Exam Note: Mass of one drop = 0.05 g.

Assertion-Reason Type Questions

Assertion-Reason 1. Assertion: Cinnabar is a chemical compound whereas brass is a mixture. Reason: Cinnabar always contains 6.25 times as much mercury as sulphur by weight. Brass can be made with widely different ratios of copper and zinc. (Responses: (a) both true and Reason is a correct explanation; (b) both true but Reason is not a correct explanation; (c) Assertion true, Reason false; (d) Assertion false, Reason true; (e) both false.)

Solution. Answer: (a). Both statements are true; the fixed composition of cinnabar (a compound) against the variable composition of brass (a mixture) explains the Assertion.

Teacher's Note: Fixed mass ratio marks a compound; variable composition marks a mixture.

Exam Note: Reason must explain the Assertion for option (a).

Assertion-Reason 2. Assertion: A single C12 atom has a mass exactly 12 amu and a mole of these atoms has a mass of exactly 12 grams. Reason: A mole of atoms of any element has a mass in grams equal to its atomic weight.

Solution. Answer: (a). Both are true and the Reason explains the Assertion.

Teacher's Note: One atom in u and one mole in g have the same number, linked by NA.

Exam Note: Mole mass in g equals atomic mass in u.

Assertion-Reason 3. Assertion: Pure water obtained from different sources such as river, well, spring, sea etc. always contains hydrogen and oxygen in the ratio of 1 : 8 by mass. Reason: Mass of reactants and products during chemical or physical change is always the same.

Solution. Answer: (b). Both Assertion and Reason are correct statements but Reason is not the correct explanation. The correct explanation is based on law of constant composition.

Teacher's Note: The 1 : 8 ratio illustrates constant composition, not conservation of mass.

Exam Note: Name the law that actually explains the Assertion.

Assertion-Reason 4. Assertion: In a gaseous reaction, the ratio of volumes of reactants and gaseous products is in agreement with their molar ratio. Reason: Volume of gas is inversely proportional to its moles at particular temperature and pressure.

Solution. Answer: (c). Assertion is true but Reason is false: volume of a gas is directly proportional to its moles at a particular temperature and pressure.

Teacher's Note: Avogadro's law: V is directly proportional to n at fixed T, P.

Exam Note: Direct, not inverse, proportionality.

Assertion-Reason 5. Assertion: The standard unit for expressing the mass of atoms is amu. Reason: amu is also called as avogram.

Solution. Answer: (b). Both Assertion and Reason are correct statements but Reason is not the correct explanation.

Teacher's Note: Avogram is only another name for amu, so it does not explain why amu is standard.

Exam Note: Alternative name is not an explanation.

Assertion-Reason 6. Assertion: Both 106 g of sodium carbonate and 12 g of carbon have same number of carbon atoms. Reason: Both contain 1 g atom of carbon which contains 6.023 × 1023 carbon atoms.

Solution. Answer: (a). 106 g Na2CO3 = 1 mol ≡ 1 g atom of C; 12 g C = 1 g atom of C. Both are true and the Reason explains the Assertion.

Teacher's Note: Both samples hold exactly one mole of carbon atoms.

Exam Note: 106 g Na2CO3 is one mole with one C atom each.

Assertion-Reason 7. Assertion: Average atomic mass of boron is 10.3. Reason: Boron has two isotopes B10 and B11 whose percentage abundances are 19.6% and 80.4% respectively.

Solution. Answer: (d). Reason is correct but average atomic mass of B = (10 × 19.6 + 11 × 80.4)/100 = 10.8. So the Assertion (10.3) is false.

Teacher's Note: Weighted average of 10 and 11 with 19.6% and 80.4% gives 10.8, not 10.3.

Exam Note: Do the weighted average before choosing.

Assertion-Reason 8. Assertion: Atomic mass of sodium is 23. Reason: An atom of sodium is 23 times heavier than (1/12)th of the mass of carbon atom (C12).

Solution. Answer: (a). Both are true and the Reason explains the Assertion, since atomic mass is defined relative to 1/12 of a C-12 atom.

Teacher's Note: Atomic mass is defined as mass relative to 1/12 of C-12 atom.

Exam Note: Definition of atomic mass supports the Assertion.

True/False Statements

True/False 1. The zeros on the right of a decimal point are not significant.

Solution. Not true. Zeros on the right of a decimal point (after a non-zero digit) are significant.

Teacher's Note: Trailing zeros after the decimal point show measurement precision, so they count.

Exam Note: Distinguish trailing zeros from leading zeros.

True/False 2. Petrol is a homogeneous mixture of a number of hydrocarbons.

Solution. True (this statement is true).

Teacher's Note: Petrol is a uniform solution of many liquid hydrocarbons.

Exam Note: Mixture of hydrocarbons, single phase.

True/False 3. Mass of reactants is always equal to the mass of the products.

Solution. True (this statement is true) for chemical reactions, by the law of conservation of mass.

Teacher's Note: Matter is neither created nor destroyed in ordinary chemical reactions.

Exam Note: Law of conservation of mass.

True/False 4. The volumes of oxygen which combine with a fixed volume of nitrogen in N2O, NO and NO2 bear a simple ratio to one another.

Solution. The book's answer key lists this statement as not true. Corrected: for a fixed volume of N2, the volumes of O2 in N2O, NO, NO2 are ½ : 1 : 2 = 1 : 2 : 4, a simple whole-number ratio, so the statement is true (law of multiple proportions in volume form). Please check against the printed statement.

Teacher's Note: Per fixed volume of nitrogen, oxygen volumes of 1/2, 1 and 2 reduce to 1 : 2 : 4.

Exam Note: Illustrates law of multiple proportions.

True/False 5. Equal volumes of different gases under similar conditions of temperature and pressure contain equal number of atoms.

Solution. Not true. They contain equal number of molecules (Avogadro's law), not atoms.

Teacher's Note: Molecules with different atomicity hold different atom counts in equal volumes.

Exam Note: Avogadro's law refers to molecules.

True/False 6. Atom is not indestructible.

Solution. True (this statement is true); atoms can be divided into subatomic particles, in contrast to Dalton's postulate.

Teacher's Note: Atoms are made of electrons, protons and neutrons and can change in nuclear reactions.

Exam Note: Modern view corrects Dalton's postulate.

True/False 7. Empirical formula represents the actual number of atoms present in a molecule of the substance.

Solution. Not true. Empirical formula gives only the simplest whole-number ratio of atoms; the molecular formula gives the actual number.

Teacher's Note: CH2O is the empirical formula for HCHO, CH3COOH and glucose alike.

Exam Note: Empirical means simplest ratio.

True/False 8. A balanced equation contains equal number of atoms of each element on both sides of the equation.

Solution. True (this statement is true).

Teacher's Note: Balancing enforces conservation of atoms of every element.

Exam Note: Balanced means atoms equal on both sides.

Fill in the Blanks

Fill in the Blank 1. The total number of digits in a number including the last whose value is uncertain is called ........

Solution. significant figures

Teacher's Note: Significant figures include all certain digits plus the first uncertain digit.

Exam Note: Define via certain plus one uncertain digit.

Fill in the Blank 2. The S.I. unit of pressure is ........

Solution. N m-2 or kg m-1 s-2 (pascal)

Teacher's Note: Pressure is force per unit area.

Exam Note: Name: pascal (Pa).

Fill in the Blank 3. 1 picometre = ........ metre.

Solution. 10-12

Teacher's Note: Pico means 10-12.

Exam Note: Pico = 10-12.

Fill in the Blank 4. A pure substance that contains only one kind of atoms is called ........

Solution. element

Teacher's Note: Elements cannot be broken into simpler substances by chemical means.

Exam Note: Contrast with compound (different atoms).

Fill in the Blank 5. The symbol 'u' used for expressing atomic and molecular masses represents ........ scale based on ........ isotope.

Solution. unified, C-12

Teacher's Note: The unified atomic mass unit is 1/12 of the mass of one C-12 atom.

Exam Note: u = 1/12 of C-12 atom.

Fill in the Blank 6. The law which states that a chemical compound always contains the same elements combined in a fixed ratio by mass is called ........

Solution. law of constant proportions or law of definite proportions

Teacher's Note: Proust's law: a pure compound has fixed mass composition irrespective of source.

Exam Note: Credit to Proust.

Fill in the Blank 7. The atomic mass of an element is the average relative mass of its atoms as compared with an atom of ........ taken as ........

Solution. carbon, 12

Teacher's Note: Relative scale is C-12 = 12.

Exam Note: C-12 isotope, value 12.

Fill in the Blank 8. According to S.I. a mole is that amount of the substance which contains as many elementary entities as there are atoms in exactly ........ kg of ........

Solution. 0.012, C-12

Teacher's Note: 12 g of C-12 contains NA atoms.

Exam Note: 12 g = 0.012 kg of C-12.

Fill in the Blank 9. The reactant which reacts completely and decides the amount of the product is called ........

Solution. limiting reactant

Teacher's Note: The reactant consumed first caps the product amount.

Exam Note: Define limiting reagent.

Fill in the Blank 10. The weight of 1 × 1022 molecules of CuSO4.5H2O is ........ (I.I.T. 1991)

Solution. (249.5/(6.02 × 1023)) × 1022 = 4.14 g.

Teacher's Note: Molar mass of CuSO4.5H2O is 249.5; scale by 1022/NA.

Exam Note: Include water of crystallisation in molar mass.

Matching Type Questions

Matching Question 1. Match entries of column A with appropriate entries of column B. Column A: 1. Petrol, 2. Brass, 3. Sugar, 4. Gold. Column B: 1. Compound, 2. Element, 3. Mixture, 4. Mixture.

Solution. 1 - 3, 2 - 4, 3 - 1, 4 - 2. That is, petrol is a mixture (3), brass is a mixture (4), sugar is a compound (1), gold is an element (2).

Teacher's Note: Alloys and fuels are mixtures; sugar has fixed composition; gold is one kind of atom.

Exam Note: Alloy: mixture; fixed composition: compound.

Download Pradeep's KL Gogia Solutions for Class 11 Math PDF

Complete Math Solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 1 Some Basic Concepts In Chemistry Part 3

Explore reliable mathematical solutions for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 1 Some Basic Concepts In Chemistry Part 3 tailored for Class 11 learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Mastering Core Concepts with Pradeep's KL Gogia Solutions

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Complete Your Class 11 Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep&#039;s KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.