Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 1 Some Basic Concepts In Chemistry Part 1

Pradeep's KL Gogia Solutions for Class 11 Chemistry: Chapter 01 Some Basic Concepts In Chemistry

Explore reliable textbook solutions for Chapter 01 Some Basic Concepts In Chemistry tailored for Class 11 learners using Pradeep's KL Gogia methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice Class 11 Chemistry Solutions: Chapter 01 Some Basic Concepts In Chemistry

View or download the dedicated Chapter 01 Some Basic Concepts In Chemistry solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Some Basic Concepts In Chemistry - Pages 1-31

Problems on Significant Figures

Question Example 1. What is the difference between 5.0 g and 5.00 g?

Solution. Though they look to be equivalent but scientifically they are different. 5.0 g has two significant figures and hence its precision is 0.1 part in 5 i.e. 20 p.p.t. 5.00 g has three significant figures and hence its precision is 0.01 parts in 5 i.e. 2 p.p.t. Hence 5.00 g is more precise measurement than 5.0 g.

Teacher's Note: Trailing zeros after a decimal point show the precision of the measuring instrument.

Exam Note: State sig. figs. and precision of each.

Question Example 2. How many significant figures are there in each of the following numbers?
(i) 6.005 (ii) 6.022 × 1023 (iii) 8000 (iv) 0.0025 (v) π (vi) the sum 18.5 + 0.4235 (vii) the product 14 × 6.345.

Solution. (i) Four because the zeros between the non-zero digits are significant.
(ii) Four because only the first term gives the significant figures and the exponential term is not counted.
(iii) Four. However, if expressed in scientific notation as 8 × 103, it will have only one significant figure; 8.0 × 103, 8.00 × 103 or 8.000 × 103 will have 2, 3 or 4 significant figures.
(iv) Two because the zeros on the left of the first non-zero digit are not significant.
(v) As π = 22/7 = 3.1428571..., it has infinite number of significant figures.
(vi) Three because the reported sum will be only upto one decimal place i.e. 18.9.
(vii) Two because the number with least number of significant figures involved in the calculation (i.e. 14) has two significant figures.

Teacher's Note: Count from the first non-zero digit; zeros between digits count, leading zeros do not.

Exam Note: Write rule used for each part.

Question Example 3. Express the following to four significant figures:
(i) 6.45372 (ii) 48.38250 (iii) 70000 (iv) 2.65986 × 103 (v) 0.004687.

Solution. (i) 6.454 (ii) 48.38 (iii) 7.000 × 104 (iv) 2.660 × 103 (v) 0.004687.

Teacher's Note: Round at the fifth digit; write 70000 in exponential form to show four figures.

Exam Note: Show rounding step for each part.

Question Example 4. A sample of nickel weighs 6.5425 g and has a density of 8.8 g/cm3. What is the volume? Report the answer to correct decimal place.

Solution. Volume = Mass/Density = 6.5425 g / 8.8 g cm-3 = 0.74 cm3. The result should have two significant figures because the least precise term (8.8) has two significant figures.

Teacher's Note: Division result carries the fewest significant figures among the data.

Exam Note: Final answer needs correct sig. figs. and units.

Question Example 5. Express the result of the following calculation to the appropriate number of significant figures:
(3.24 × 0.08666)/5.006 (N.C.E.R.T.)

Solution. (3.24 × 0.08666)/5.006 = 0.0560883 (actual result). As 3.24 has least number of significant figures viz 3, the result should contain 3 significant figures only. Hence the result will be reported as 0.0561 (after rounding off).

Teacher's Note: Identify the least precise number (3.24, three figures) before rounding.

Exam Note: Full marks need the rounded value 0.0561.

Problems for Practice - Significant Figures

Question Practice Problem 1. How many significant figures are there in each of the following numbers?
(i) 6.200 (ii) 0.052 (iii) 7.5 × 104 (iv) 0.00050 (v) 67.32 − 6.3 (vi) 4.2 + 7.589 (vii) (5.56)2(8.24)/(3.6) (viii) 18.567/(8.1 × 2)

Solution. Ans. (i) 4 (ii) 2 (iii) 2 (iv) 2 (v) 3 (vi) 3 (vii) 2 (viii) 2.
Hints: (i) Zeros to the right of the decimal point are significant. (ii) Zeros to the left of the first non-zero digit are not significant. (v) 67.32 − 6.3 = 61.02; the result is reported to the same number of decimal places as the term with least decimal places (6.3, one place), so 61.0 (three significant figures). (vi) 4.2 + 7.589 = 11.789, reported to one decimal place as 11.8 (three significant figures). (vii) The least precise term (3.6) has two significant figures. (viii) Leaving the exact number 2, the least precise term (8.1) has two significant figures.

Teacher's Note: Addition and subtraction follow decimal places; multiplication and division follow significant figures.

Exam Note: Apply the correct rule for each operation.

Question Practice Problem 2. What is the number of significant figures in (i) Avogadro's number (6.0 × 1023) and (ii) Planck's constant (6.62 × 10-34 Js)?

Solution. Ans. (i) 2 (ii) 3. The exponential term is not counted, so only the digits 6.0 and 6.62 count.

Teacher's Note: The power of ten never counts towards significant figures.

Exam Note: Count digits in the coefficient only.

Question Practice Problem 3. Express the number 45000 in exponential notation to show (i) two significant figures (ii) four significant figures.

Solution. Ans. (i) 4.5 × 104 (ii) 4.500 × 104.

Teacher's Note: Trailing zeros in an integer are ambiguous; scientific notation removes the doubt.

Exam Note: Write one non-zero digit before the point.

Question Practice Problem 4. Criticize the following statements:
(i) A fossil was studied 25 years ago and was found to be 25000 years old. Now it must be 25025 years old.
(ii) The population of a city is 605,000. A family of five persons shifts to some other city. The population of the city must now be 604,995.

Solution. (i) 25000 = 2.5 × 104. It has only two significant figures. Expressing the new value in terms of the same number of significant figures, the age of the fossil after 25 years can be taken as 2.5 × 104 years, i.e. unchanged.
(ii) (Only the hint for part (i) is printed in the source; part (ii) is worked here on the same principle.) 605,000 has three significant figures (6.05 × 105), so subtracting 5 gives 604,995, which would wrongly claim six significant figures. The population should still be reported as 6.05 × 105.

Teacher's Note: A result cannot be more precise than the least precise data used.

Exam Note: Mention significant figures when criticising.

Dimensional Analysis

Question Example 1 (Unit Conversion). A man weighs 175 lb. Express his weight in kg. Given that 1 kg = 2.205 lb.

Solution. 1 kg = 2.205 lb, so 1 = (2.205 lb)/(1 kg) = (1 kg)/(2.205 lb). Hence 175 lb = 175 lb × (1 kg)/(2.205 lb) = 79.4 kg. The unit 'lb' cancels from the numerator and denominator and the answer is in the required units i.e. kg.
Note. If the conversion factor were not correctly used, the answer would have absurd units, e.g. 175 lb × (2.205 lb)/(1 kg) would give units lb2 kg-1.

Teacher's Note: Choose the conversion factor so the unwanted unit cancels.

Exam Note: Show unit cancellation clearly.

Question Example 2 (Unit Conversion). How many inches are there in 3.00 km? Given that 1 km = 1000 m, 1 m = 1.094 yd, 1 yd = 36 in.

Solution. Using the unit conversion factors in succession so that the units of the preceding factor cancel:
3.00 km × (1000 m/1 km) × (1.094 yd/1 m) × (36 in/1 yd) = 1.18 × 105 in.
Note that the answer has been reported to three significant figures (because 1000 m and 36 in are exact numbers).

Teacher's Note: Exact conversion factors do not limit significant figures.

Exam Note: Chain factors; report three sig. figs.

Question Example 3 (S.I. Units). Express the following in S.I. base units using power of 10 notation (example 2.54 mm = 2.54 × 10-3 m): (a) 1.35 mm (b) 1 day (c) 6.45 mL (d) 48 μg (e) 0.0426 in (N.C.E.R.T.)

Solution. (a) S.I. unit of length is 'm'. 1.35 mm = 1.35 mm × (1 cm/10 mm) × (1 m/100 cm) = 1.35 × 10-3 m.
(b) S.I. unit of time is 'sec' (s). 1 day = 1 day × (24 hours/1 day) × (60 min/1 hour) × (60 s/1 min) = 8.6400 × 104 s.
(c) S.I. unit of volume is 'm3'. 6.45 mL = 6.45 mL × (1 cm3/1 mL) × (1 m/100 cm)3 = 6.45 × 10-6 m3.
(d) S.I. unit of mass is 'kg'. 48 μg = 48 μg × (10-6 g/1 μg) × (1 kg/1000 g) = 4.8 × 10-8 kg.
(e) 0.0426 in = 0.0426 in × (2.54 cm/1 in) × (1 m/100 cm) = 1.082 × 10-3 m.

Teacher's Note: Convert each quantity to its S.I. base unit (m, s, m3, kg) first.

Exam Note: Cube the length factor for volume.

Question Example 1 (Solving Problems). What is the mass (in grams) of an aluminium block whose dimensions are 2.0 in. × 3.0 in. × 4.0 in. and whose density is 2.7 g/cm3? Given that 1 in. = 2.54 cm.

Solution. Unit conversion factors: 1 = 2.54 cm/1 in. = 1 in./2.54 cm and 1 = 2.7 g/1 cm3 = 1 cm3/2.7 g.
Required mass (in g) = 2.0 in × 3.0 in × 4.0 in × (2.54 cm/1 in)3 × (2.7 g/1 cm3) = 1.1 × 103 g.

Teacher's Note: Volume in in3 must be converted with the cube of 2.54.

Exam Note: Round to two significant figures.

Question Example 2 (Solving Problems). The mass of precious stones is expressed in terms of 'carat'. Given that 1 carat = 3.168 grains and 1 gram = 15.4 grains, calculate the total mass of a ring in grams and kilograms which contains 0.500 gram carat diamond and 7.00 gram gold. (N.C.E.R.T.)

Solution. Unit conversion factors: 1 = 1 carat/3.168 grains = 3.168 grains/1 carat and 1 = 1 gram/15.4 grains = 15.4 grains/1 gram.
0.500 carat = 0.500 carat × (3.168 grains/1 carat) × (1 gram/15.4 grains) = 0.10 gram.
Total mass of the ring = 7.00 + 0.10 g = 7.10 g = 7.10 g × (1 kg/1000 g) = 0.0071 kg.

Teacher's Note: Convert carat to grains to grams, then add masses.

Exam Note: Add only after converting to same unit.

Question Example (Checking Equations). Using the method of dimensional analysis, verify the validity of the following equations: (i) c = νλ (ii) S = ut + ½at2

Solution. (i) Dimensions of L.H.S. i.e. c = m s-1. Dimensions of R.H.S. i.e. νλ = s-1 × m = m s-1. Hence from dimensions point of view, the equation is correct.
(ii) Dimensions of L.H.S. i.e. S = metres (m). Dimensions of R.H.S. i.e. ut + ½at2 = m s-1 × s + ½ m s-2 × s2 = m + m = metres (m). Hence from dimensions point of view, the equation is correct.

Teacher's Note: Both sides of a valid equation must have identical dimensions; numbers like ½ are dimensionless.

Exam Note: Show dimensions of both sides separately.

Law of Conservation of Mass

Question Example (Conservation of Mass). 4.90 g of KClO3 when heated produced 1.92 g of oxygen and the residue (KCl) left behind weighs 2.96 g. Show that these results illustrate the law of conservation of mass.

Solution. Mass of KClO3 taken = 4.90 g. Total mass of the products (KCl + O2) = 2.96 + 1.92 = 4.88 g. Difference between the mass of the reactant and the total mass of the products = 4.90 − 4.88 = 0.02 g. This small difference may be due to experimental error. Thus law of conservation of mass holds good within experimental errors.

Teacher's Note: Compare total mass before and after; small gaps are experimental error.

Exam Note: State reactant mass equals product mass.

Question Practice Problem 1 (Conservation of Mass). What mass of silver nitrate will react with 5.85 g of sodium chloride to produce 14.35 g of silver chloride and 8.5 g of sodium nitrate, if the law of conservation of mass is true?

Solution. Ans. 17.0 g. Hint: AgNO3 + NaCl → AgCl + NaNO3; x g + 5.85 g = 14.35 g + 8.5 g, so x + 5.85 = 22.85 and x = 17.0 g.

Teacher's Note: Total reactant mass equals total product mass.

Exam Note: Write balanced equation with masses.

Question Practice Problem 2 (Conservation of Mass). When 4.2 g of NaHCO3 is added to a solution of acetic acid (CH3COOH) weighing 10.0 g, it is observed that 2.2 g of CO2 is released into the atmosphere. The residue left behind is found to weigh 12.0 g. Show that these observations are in agreement with the law of conservation of mass. (N.C.E.R.T.)

Solution. NaHCO3 + CH3COOH → CH3COONa + H2O + CO2↑. Total mass of reactants = 4.2 + 10.0 = 14.2 g. Total mass of products = residue 12.0 g + CO2 2.2 g = 14.2 g. Since the two are equal, the observations agree with the law of conservation of mass.

Teacher's Note: Count the escaped gas as part of the products.

Exam Note: Include gaseous CO2 in product mass.

Question Practice Problem 3 (Conservation of Mass). If 6.3 g of NaHCO3 are added to 15.0 g CH3COOH solution, the residue is found to weigh 18.0 g. What is the mass of CO2 released in the reaction? (N.C.E.R.T.)

Solution. Ans. 3.3 g. Mass of reactants = 6.3 + 15.0 = 21.3 g. By conservation of mass, mass of CO2 = 21.3 − 18.0 = 3.3 g.

Teacher's Note: Missing mass in an open vessel is the gas that escaped.

Exam Note: Subtract residue from total reactants.

Problems on Law of Constant Composition

Question Example 1 (Constant Composition). 6.488 g of lead combine directly with 1.002 g of oxygen to form lead peroxide (PbO2). Lead peroxide is also produced by heating lead nitrate and it was found that the percentage of oxygen present in lead peroxide is 13.38 percent. Use these data to illustrate the law of constant composition.

Solution. Step 1. Percentage of oxygen in the first experiment. Mass of peroxide formed = 6.488 + 1.002 = 7.490 g. 7.490 g of lead peroxide contain 1.002 g of oxygen, so 100 g of lead peroxide contain oxygen = (1.002/7.490) × 100 = 13.38 g i.e. oxygen present = 13.38%.
Step 2. Comparison. Percentage of oxygen in PbO2 in the first experiment = 13.38; in the second experiment = 13.38. Since the percentage composition of oxygen in both the samples of PbO2 is identical, the above data illustrate the law of constant composition.

Teacher's Note: Same compound from any source has same percentage composition.

Exam Note: Compute percentage for each sample, then compare.

Question Example 2 (Constant Composition). Copper oxide was prepared by the following methods: (a) In one case, 1.75 g of the metal were dissolved in nitric acid and igniting the residual copper nitrate yielded 2.19 g of copper oxide. (b) In the second case, 1.14 g of metal dissolved in nitric acid were precipitated as copper hydroxide by adding caustic alkali solution. The precipitate after washing, drying and heating yielded 1.43 g of copper oxide. (c) In the third case, 1.45 g of copper when strongly heated in a current of air yielded 1.83 g of copper oxide. Show that the given data illustrate the law of constant composition.

Solution. Step 1. First experiment: 2.19 g of copper oxide contained 1.75 g Cu, so 100 g of copper oxide contained (1.75/2.19) × 100 = 79.91 g.
Step 2. Second experiment: 1.43 g of copper oxide contained 1.14 g copper, so 100 g contained (1.14/1.43) × 100 = 79.72 g.
Step 3. Third experiment: 1.83 g of copper oxide contained 1.46 g of copper, so 100 g contained (1.46/1.83) × 100 = 79.78 g.
Thus the percentage of copper in copper oxide derived from all the three experiments is nearly the same. Hence the above data illustrate the law of constant composition.
Corrected: the question prints 1.45 g of copper for the third case but the solution uses 1.46 g; with 1.46 g the result is 79.78%, with 1.45 g it is 79.23%. The solution value (1.46 g) is retained; please check the printed question.

Teacher's Note: Compute % of copper in each sample; near equality proves the law.

Exam Note: Show three percentages side by side.

Practice Problems - Constant Composition

Question Practice Problem 1 (Constant Composition). 2.16 g of copper metal when treated with nitric acid followed by ignition of the nitrate gave 2.70 g of copper oxide. In another experiment 1.15 g of copper oxide upon reduction with hydrogen gave 0.92 g of copper. Show that the above data illustrate the Law of Definite Proportions.

Solution. % of Cu in copper oxide in 1st case = (2.16/2.70) × 100 = 80%, % of oxygen = 20%. % of Cu in copper oxide in 2nd case = (0.92/1.15) × 100 = 80%, % of oxygen = 20%. The composition is the same in both cases, so the data illustrate the law of definite proportions.

Teacher's Note: Identical percentage composition from two preparations proves the law.

Exam Note: Give both percentages and conclude.

Question Practice Problem 2 (Constant Composition). Silver chloride is prepared by (i) dissolving 0.5 g of silver in nitric acid and adding excess of hydrochloric acid to silver nitrate. The silver chloride precipitate is separated, washed and dried. The weight of silver chloride is 0.66 g. (ii) heating 1 g of silver metal in a current of dry chlorine gas till the metal is completely converted into its chloride. It is found to weigh 1.32 g. Illustrate the law of constant composition by the above data.

Solution. % of Ag in AgCl in 1st case = (0.5/0.66) × 100 = 75.76%, % of Cl = 24.24%. % of Ag in AgCl in 2nd case = (1/1.32) × 100 = 75.76%, % of Cl = 24.24%. Same composition by both methods, so the law of constant composition is illustrated.

Teacher's Note: Different routes, same compound: percentages must match.

Exam Note: Compare Ag% for both methods.

Problems on Law of Multiple Proportions

Question Example 1 (Multiple Proportions). Carbon is found to form two oxides, which contain 42.9% and 27.3% of carbon respectively. Show that these figures illustrate the law of multiple proportions. (N.C.E.R.T.)

Solution. Step 1. Percentage composition: first oxide - carbon 42.9%, oxygen 57.1% (by difference); second oxide - carbon 27.3%, oxygen 72.7%.
Step 2. Masses of carbon combining with a fixed mass (1 part) of oxygen. First oxide: 57.1 parts oxygen combine with 42.9 parts carbon, so 1 part oxygen combines with 42.9/57.1 = 0.751 part carbon. Second oxide: 72.7 parts oxygen combine with 27.3 parts carbon, so 1 part oxygen combines with 27.3/72.7 = 0.376 part carbon.
Step 3. Ratio of carbon masses = 0.751 : 0.376 = 2 : 1. Since this is a simple whole number ratio, the data illustrate the law of multiple proportions.

Teacher's Note: Fix the mass of one element (oxygen = 1) and compare the other.

Exam Note: Ratio must be a simple whole number.

Question Example 2 (Multiple Proportions). Two oxides of a certain metal were separately heated in a current of hydrogen until constant weights were obtained. The water produced in each case was carefully collected and weighed. 2 grams of each oxide gave respectively 0.2517 grams and 0.4526 grams of water. Show that these results establish the Law of Multiple Proportions.

Solution. Step 1. Mass of oxygen in each oxide. 18 g of H2O contain 16 g of oxygen. Case I: 0.2517 g water contain oxygen = (16/18) × 0.2517 = 0.2237 g. Case II: 0.4526 g water contain oxygen = (16/18) × 0.4526 = 0.4023 g.
Step 2. Oxygen combining with 1 g of metal. Case I: mass of metal = 2 − 0.2237 = 1.7763 g; oxygen combining with 1 g of metal = 0.2237/1.7763 = 0.1259 g. Case II: mass of metal = 2 − 0.4023 = 1.5977 g; oxygen combining with 1 g of metal = 0.4023/1.5977 = 0.2518 g.
Step 3. Ratio = 0.1259 : 0.2518 = 1 : 2, a simple whole number ratio, so the results establish the law of multiple proportions.
Corrected: the book prints 0.2515 for case II; the correct value is 0.2518 (ratio still 1 : 2).

Teacher's Note: Oxygen in water equals 16/18 of the water mass.

Exam Note: Show ratio 1:2 for fixed metal mass.

Question Example 3 (Multiple Proportions). Two oxides of a metal contain 27.6% and 30.0% of oxygen respectively. If the formula of the first oxide is M3O4, find that of the second.

Solution. In the first oxide, oxygen = 27.6, metal = 100 − 27.6 = 72.4 parts by mass. As the formula of the oxide is M3O4, this means 72.4 parts by mass of metal = 3 atoms of metal and 4 atoms of oxygen = 27.6 parts by mass. In the second oxide, oxygen = 30.0 and metal = 70 parts by mass. 70 parts of metal = (3/72.4) × 70 = 2.90 atoms of metal. 30 parts of oxygen = (4/27.6) × 30 = 4.35 atoms of oxygen. Hence ratio of M : O in the second oxide = 2.90 : 4.35 = 1 : 1.5 = 2 : 3. Formula of the metal oxide is M2O3.

Teacher's Note: Use the first oxide to fix the relative atomic mass ratio.

Exam Note: Convert ratio to simplest whole numbers.

Practice Problems - Multiple Proportions

Question Practice Problem 1 (Multiple Proportions). Two oxides of lead were separately reduced to metallic lead by heating in a current of hydrogen and the following data obtained: (i) Mass of yellow oxide taken = 3.45 g; loss in mass during reduction = 0.24 g. (ii) Mass of brown oxide taken = 1.227 g; loss in mass during reduction = 0.16 g. Show that the above data illustrate the Law of Multiple Proportions.

Solution. Loss in mass is the oxygen removed. Yellow oxide: lead = 3.45 − 0.24 = 3.21 g, so lead combining with 1 g oxygen = 3.21/0.24 = 13.375 g. Brown oxide: lead = 1.227 − 0.16 = 1.067 g, so lead combining with 1 g oxygen = 1.067/0.16 = 6.669 g. Ratio = 13.375 : 6.669 = 2 : 1, a simple ratio, so the law is illustrated. (Hint printed in the source: calculate the mass of lead combined with 1 g of oxygen in each case, 13.375 g and 6.669 g, ratio 2 : 1.)

Teacher's Note: Loss on reduction equals oxygen mass; compare lead per gram of oxygen.

Exam Note: Show ratio 2:1 explicitly.

Question Practice Problem 2 (Multiple Proportions). Copper gives two oxides. On heating 1.0 g of each in hydrogen gas, 0.888 g and 0.799 g of the metal are produced. Show that the results agree with the Law of Multiple Proportions.

Solution. Oxygen in the first oxide = 1.0 − 0.888 = 0.112 g; in the second = 1.0 − 0.799 = 0.201 g. Copper combined with 1.0 g oxygen: 0.888/0.112 = 7.93 g and 0.799/0.201 = 3.97 g. The ratio 7.93 : 3.97 = 2 : 1 is a simple ratio, so the law is illustrated.

Teacher's Note: Compare copper masses for the same mass of oxygen.

Exam Note: Ratio 2:1 shows the law.

Question Practice Problem 3 (Multiple Proportions). Two oxides of nitrogen contain the following percentage compositions: (i) Oxide A contains 63.64% nitrogen and 36.36% oxygen. (ii) Oxide B contains 46.67% nitrogen and 53.33% oxygen. Establish the Law of Multiple Proportions.

Solution. Mass of oxygen combined with 1.0 g of nitrogen: oxide A = 36.36/63.64 = 0.571 g; oxide B = 53.33/46.67 = 1.143 g. The ratio 0.571 : 1.143 = 1 : 2, a simple whole number ratio, so the law of multiple proportions is established.

Teacher's Note: Fix nitrogen at 1 g and compare oxygen masses.

Exam Note: Show the 1:2 ratio of oxygen.

Question Practice Problem 4 (Multiple Proportions). A metal forms two oxides. One contains 46.67% of the metal and another, 63.94% of the metal. Show that these results are in accordance with the law of multiple proportions.

Solution. Oxygen in the first oxide = 100 − 46.67 = 53.33%; in the second = 100 − 63.94 = 36.06%. Mass of metal that combines with 1.0 g oxygen: first = 46.67/53.33 = 0.875 g; second = 63.94/36.06 = 1.773 g. The ratio 0.875 : 1.773 = 1 : 2, so the results agree with the law of multiple proportions.

Teacher's Note: Get oxygen by difference, then compare metal per gram of oxygen.

Exam Note: Ratio 1:2 completes the proof.

Question Practice Problem 5 (Multiple Proportions). Nitrogen forms five compounds with oxygen in which 1.0 g of nitrogen combines with 0.572, 1.14, 1.73, 2.28 and 2.85 g of oxygen respectively. Show that these figures agree with law of multiple proportions.

Solution. The masses of oxygen which combine with 1 g of nitrogen are in the ratio 0.572 : 1.14 : 1.73 : 2.28 : 2.85 = 1 : 2 : 3 : 4 : 5 (dividing by 0.572 gives 1 : 1.99 : 3.02 : 3.99 : 4.98). This is a simple whole number ratio, so the law is obeyed.

Teacher's Note: Divide every value by the smallest to get whole numbers.

Exam Note: Show division by 0.572 explicitly.

Question Practice Problem 6 (Multiple Proportions). Elements X and Y form two different compounds. In the first, 0.324 g of X is combined with 0.471 g of Y. In the second, 0.117 g of X is combined with 0.509 g of Y. Show that these data illustrate the Law of Multiple Proportions.

Solution. Mass of Y combining with 1 g of X: first compound = 0.471/0.324 = 1.454 g; second = 0.509/0.117 = 4.35 g. Ratio = 1.454 : 4.35 = 1 : 3 (4.35/1.454 = 2.99). Simple whole number ratio, so the law is illustrated.

Teacher's Note: Fix mass of X at 1 g, compare masses of Y.

Exam Note: Show 1:3 ratio of Y.

Question Practice Problem 7 (Multiple Proportions). If a certain oxide of nitrogen weighing 0.11 g gives 56 ml of nitrogen and another oxide of nitrogen weighing 0.15 g gives the same volume of nitrogen (both at STP), show that these results support the law of multiple proportions.

Solution. 22400 cc of N2 at STP weigh 28 g, so 56 mL of N2 weigh 0.07 g. First oxide: oxygen = 0.11 − 0.07 = 0.04 g. Second oxide: oxygen = 0.15 − 0.07 = 0.08 g. For the same mass of nitrogen (0.07 g), oxygen masses are in the ratio 0.04 : 0.08 = 1 : 2, so the law is supported.

Teacher's Note: Same volume of N2 means same mass of nitrogen; compare oxygen.

Exam Note: Convert gas volume to mass first.

Question Practice Problem 8 (Multiple Proportions). (i) 10 g of lead on heating gave 10.78 g of litharge, PbO. (ii) 9.775 g of red lead (Pb3O4) yielded on strong heating 9.545 g of litharge. (iii) 4.87 g of lead peroxide (PbO2) gave on heating 4.545 g of litharge. Show that these results illustrate the law of multiple proportions.

Solution. (i) Oxygen combined with 10 g lead = 0.78 g, i.e. 0.078 g per g of lead. (ii) Lead in 9.545 g PbO = 9.545 × 10/10.78 = 8.855 g, so oxygen in 9.775 g Pb3O4 = 9.775 − 8.855 = 0.920 g; per g of lead = 0.1039 g. (iii) Lead in 4.545 g PbO = 4.545 × 10/10.78 = 4.217 g, so oxygen in 4.87 g PbO2 = 4.87 − 4.217 = 0.653 g; per g of lead = 0.1548 g. The masses of oxygen combining with 1 g of lead are 0.078 : 0.1039 : 0.1548 = 3 : 4 : 6 (as stated in the printed hint), a simple ratio.

Teacher's Note: Find lead from the litharge formed, then oxygen by difference.

Exam Note: Ratio 3:4:6 across three oxides.

Law of Reciprocal Proportions

Question Example (Reciprocal Proportions). Ammonia contains 82.35% of nitrogen and 17.65% of hydrogen. Water contains 88.90% of oxygen and 11.10% of hydrogen. Nitrogen trioxide contains 63.15% of oxygen and 36.85% of nitrogen. Show that these data illustrate the law of reciprocal proportions.

Solution. In NH3, 17.65 g of H combine with N = 82.35 g, so 1 g of H combines with N = 82.35/17.65 = 4.67 g. In H2O, 11.10 g of H combine with O = 88.90 g, so 1 g of H combines with O = 88.90/11.10 = 8.01 g. Ratio of the masses of N and O which combine with fixed mass of H (= 1 g) = 4.67 : 8.01 = 1 : 1.72. In N2O3, ratio of masses of N and O which combine with each other = 36.85 : 63.15 = 1 : 1.71. Thus the two ratios are the same. Hence it illustrates the law of reciprocal proportions.

Teacher's Note: Compare the ratio via the third element with the direct ratio.

Exam Note: Both ratios must be equal or simple multiples.

Problems for Practice - Reciprocal Proportions

Question Practice Problem 1 (Reciprocal Proportions). Carbon dioxide on disulphide contains 15.79% of carbon, carbon dioxide contains 27.27% of carbon and sulphur dioxide contains 50% of sulphur. Are these figures in agreement with the law of reciprocal proportions?

Solution. Ans. Yes. In CS2 (15.79% C, 84.21% S): 1 g C combines with S = 84.21/15.79 = 5.33 g. In CO2 (27.27% C, 72.73% O): 1 g C combines with O = 72.73/27.27 = 2.67 g. Ratio of masses of S and O combining with fixed mass of carbon = 5.33 : 2.67 = 2 : 1. In SO2 (50% S, 50% O), S and O combine in the ratio 50 : 50 = 1 : 1. Thus the two ratios are simple multiples of each other.

Teacher's Note: Compare ratio through carbon (2:1) with direct ratio (1:1).

Exam Note: Ratios differ by simple multiple 2.

Question Practice Problem 2 (Reciprocal Proportions). Phosphorus trichloride contains 22.57% of phosphorus, phosphine (PH3) contains 91.18% of phosphorus while hydrogen chloride gas contains 97.23% of chlorine. Prove by calculations, which law is illustrated by these data.

Solution. (No answer is printed in the source; worked here.) Law of reciprocal proportions. In PCl3: Cl per g of P = 77.43/22.57 = 3.43 g. In PH3: H per g of P = 8.82/91.18 = 0.0967 g. Ratio of Cl : H combining with fixed mass of P = 3.43 : 0.0967 = 35.5 : 1. In HCl, Cl : H = 97.23 : 2.77 = 35.1 : 1. The two ratios are nearly the same (within rounding of the data), so the law of reciprocal proportions is illustrated.

Teacher's Note: Use the common element P to link the two compounds.

Exam Note: Name the law, then compare the ratios.

Question Practice Problem 3 (Reciprocal Proportions). 61.8 g of A combine with 80 g of B. 30.9 g of A combine with 106.5 g of C. B and C combine to form compound CB2. Atomic weights of C and B are respectively 35.5 and 6.6. Show that the law of reciprocal proportions is obeyed.

Solution. Mass of B combining with 1 g of A = 80/61.8 = 1.29 g. Mass of C combining with 1 g of A = 106.5/30.9 = 3.45 g. Ratio of masses of B and C combining with fixed mass of A = 1.29 : 3.45 = 1 : 2.67 = 3 : 8. Ratio of B and C combining directly (CB2) = (2 × 6.6) : 35.5 = 13.2 : 35.5 = 1 : 2.67 = 3 : 8 (approximately). Thus the two ratios are the same.

Teacher's Note: CB2 gives the direct ratio 2 × 6.6 : 35.5.

Exam Note: Compute both ratios and equate.

Step-by-Step Pradeep's KL Gogia Solutions for Class 11 Math

Chapter-wise Pradeep's KL Gogia Solutions: Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 1 Some Basic Concepts In Chemistry Part 1

Access the complete chapter-wise PDF for Pradeep's KL Gogia Solutions Class 11 Chemistry Chapter 1 Some Basic Concepts In Chemistry Part 1. These structured Pradeep's KL Gogia Solutions solutions for Class 11 Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Detailed Calculation Guides for Class 11

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for Class 11 Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Pradeep's KL Gogia Solutions for Class 11 Chemistry?

They are chapter-wise solved questions from the Pradeep's KL Gogia book for Class 11 Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Pradeep's KL Gogia Class 11 Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Pradeep's KL Gogia solutions for Class 11 Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Pradeep's KL Gogia Class 11 Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these Class 11 Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.