P Bahadur Solutions Numerical Chemistry Chapter 9 Colligative Properties Solutions Part 1

P Bahadur Solutions for JEE Chemistry: Chapter 09 Colligative Properties Solutions

Explore reliable textbook solutions for Chapter 09 Colligative Properties Solutions tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice JEE Chemistry Solutions: Chapter 09 Colligative Properties Solutions

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 9 Colligative Properties and Solutions - Numerical Problems 1-114

Numerical Problems

Question 1. Calculate the osmotic pressure at 17°C of an aqueous solution containing 1.75 g of sucrose per 150 mL solution.

Solution. Given w = 1.75 g, m = 342, V = 150/1000 litre, T = 290 K.
πV = nST = (w/m)ST
π × (150/1000) = (1.75/342) × 0.0821 × 290
π = 0.812 atm

Teacher's Note: Use πV = (w/m)ST with V in litres, T in kelvin and S = 0.0821.

Exam Note: Convert 17°C to 290 K.

Question 2. The osmotic pressure of a non-volatile solute in C6H6 at 25°C is 20.66 Nm-2. If the solution had a concentration of 2 g/dm3, what is molar mass of solute?

Solution. Given π = 20.66 Nm-2; w/V = 2 g/dm3 = (2 × 10-3)/10-3 kg/m3; S = 8.314 J K-1 mol-1, T = 273 + 25 = 298 K.
πV = (w/m)ST ∴ m = (w/V)·ST/π
m = (2 × 10-3 × 8.314 × 298)/(10-3 × 20.66) = 239.84 kg mol-1

Teacher's Note: In SI units keep π in Nm-2, S in J, and w/V in kg/m3.

Exam Note: Use SI units consistently; state kg/mol.

Question 3. At 27°C, 36 g of glucose per litre has an O.P. of 4.92 atm. If the osmotic pressure of solution is 1.5 atm at the same temperature, what should be its concentration?

Solution. C1 = 36/(180 × 1) (∵ C = w/(m × V)), C2 = ?
At the same temperature π1/π2 = C1/C2
4.92/1.5 = (36/(180 × 1))/C2 ∴ C2 = 0.061 mol/L

Teacher's Note: At constant temperature, osmotic pressure is directly proportional to molar concentration.

Exam Note: Compare concentrations by ratio; no need for S.

Question 4. 2.5 g of a substance is present in 200 mL of solution showing the osmotic pressure of 60 cm Hg at 15°C. Calculate the molar mass of the substance. What will be the osmotic pressure if temperature is raised to 25°C?

Solution. Given w = 2.5 g, V = 200/1000 litre, π = 60/76 atm, T = 288 K.
πV = (w/m)ST
(60/76) × (200/1000) = (2.5/m) × 0.0821 × 288 ∴ m = 374.38 g mol-1
Also π1/π2 = T1/T2 ∴ 60/π2 = 288/298
∴ π2 = 62.08 cm Hg

Teacher's Note: Convert cm Hg to atm before using S = 0.0821; at fixed concentration π is proportional to T.

Exam Note: Pressure converts: 76 cm Hg = 1 atm.

Question 5. Calculate O.P. of a solution obtained by mixing 100 mL of 3.4% solution (mass/vol.) of urea (molar mass 60) and 100 mL of 1.6% solution (mass/vol.) of cane-sugar (molar mass 342) at 20°C.

Solution. The 100 mL urea solution is mixed with the 100 mL cane-sugar solution, so total volume becomes 200 mL, in which 3.4 g urea and 1.6 g sugar are present.
For urea: π1 × (200/1000) = (3.4/60) × 0.0821 × 293 ∴ π1 = 6.82 atm
For sugar: π2 × (200/1000) = (1.6/342) × 0.0821 × 293 ∴ π2 = 0.56 atm
πTotal = π1 + π2 = 6.82 + 0.56 = 7.38 atm

Teacher's Note: Mixing dilutes each solute to 200 mL; total osmotic pressure is the sum of the partial contributions.

Exam Note: Add contributions after recalculating the final volume.

Question 6. A 10 g mixture of glucose and urea present in 250 mL solution shows the osmotic pressure of 7.4 atm at 27°C. Calculate % composition of mixture.

Solution. Corrected: let the mixture contain a g glucose (m = 180) and b g urea (m = 60).
a + b = 10 ...(1)
πV = nST: 7.4 × (250/1000) = [a/180 + b/60] × 0.0821 × 300
a/180 + b/60 = 0.0751, i.e. a + 3b = 13.52 ...(2)
Solving (1) and (2): b = 1.76 g urea, a = 8.24 g glucose.
% of glucose = (8.24/10) × 100 = 82.4
% of urea = (1.76/10) × 100 = 17.6
(The book prints the two percentages interchanged: glucose 17.6, urea 82.4. Check: 8.24/180 + 1.76/60 = 0.04578 + 0.02933 = 0.0751 mol, which reproduces the given π.)

Teacher's Note: Total moles from π, then solve two equations; urea has the smaller molar mass so it contributes more per gram.

Exam Note: Check the final answer back in πV = nST.

Question 7. At 25°C, a solution containing 0.2 g of polyisobutylene in 100 mL of benzene developed a rise of 2.4 mm at osmotic equilibrium. Calculate the molar mass of polyisobutylene if the density of the solution is 0.88 g/mL.

Solution. Height developed = 2.4 mm = 0.24 cm
Osmotic pressure = h·d·g = (2.4/10) × 0.88 × 981 = 207.187 dyne cm-2
Now πV = (w/m)ST (R in erg, V in mL, using CGS system)
207.187 × 100 = (0.2/m) × 8.314 × 107 × 298
∴ m = 2.39 × 105 g mol-1

Teacher's Note: Osmometry suits polymers: tiny height rise still gives a large molar mass in CGS units.

Exam Note: Use CGS units consistently: dyne cm-2, erg, mL.

Question 8. A tube of uniform cross-sectional area 1 cm2 is closed at one end with semipermeable membrane. A solution of 5 g glucose per 100 mL is placed inside the tube and is dipped in pure water at 27°C. What equilibrium is established, calculate:
(a) Osmotic pressure of solution.
(b) Height developed in vertical column.
Assume density of final glucose solution 1 g/mL.

Solution. (a) πV = (w/m)ST; w = 5 g, V = 100/1000 litre, T = 300 K, m = 180
π = (5 × 1000 × 0.0821 × 300)/(180 × 100) = 6.842 atm
(b) π = hdg: 6.841 × 1.01 × 105 = h × 103 × 9.81 (π = 6.841 atm = 6.841 × 1.01 × 105 Nm-2; d = 1 g/cm3 = 103 kg/m3; g = 9.81 m/s2)
h = (6.841 × 1.01 × 105)/(9.81 × 103) = 70.43 m

Teacher's Note: Osmotic pressure balances hydrostatic pressure hdg at equilibrium; convert atm to Nm-2.

Exam Note: Convert atm to Pa before using hdg.

Question 9. A beaker containing 20 g sugar in 100 g water and another containing 10 g sugar in 100 g water are placed under a bell-jar and allowed to stand until equilibrium is reached. How much water will be transferred from one beaker to other?

Solution. 1. At equilibrium the solutions occupy same vapour pressures as well as same concentrations since both are non-electrolyte.
2. Let w g of water pass from dilute solution to concentrate one to attain equilibrium.
Since Ps ∝ mole fraction of solvent and (P° − Ps)/Ps = n/N:
(P° − Ps)/Ps for I = (P° − Ps)/Ps for II
(20 × 18)/(342 × (100 + w)) = (10 × 18)/(342 × (100 − w))
∴ w = 33.3 g (water moves from the 10 g sugar beaker to the 20 g sugar beaker)

Teacher's Note: Water vapour moves until both solutions have equal vapour pressure, i.e. equal mole fraction of solute.

Exam Note: Equal final molality fixes the transferred mass.

Question 10. At 300 K, two solutions of glucose in water of concentration 0.01 M and 0.001 M are separated by semipermeable membrane with respect to water. On which solution, the pressure need be applied to prevent osmosis? Calculate magnitude of this applied pressure.

Solution. For 0.01 M solution: π1V1 = n1ST1, n1/V1 = 0.01, T = 300 K
∴ π1 = 0.01 × 0.0821 × 300 = 0.2463 atm
For 0.001 M solution: π2 = 0.001 × 0.0821 × 300 = 0.02463 atm
The movement of solvent particles occurs from dilute to concentrate solution, i.e. 0.001 M to 0.01 M solution. Thus, pressure should be applied on concentrated solution, i.e. on 0.01 M solution to prevent osmosis.
Magnitude of external pressure = 0.2463 − 0.0246 = 0.2217 atm on 0.01 M solution.

Teacher's Note: Solvent flows from dilute to concentrated side; external pressure equals the difference of the two osmotic pressures.

Exam Note: Apply pressure on the concentrated side only.

Question 11. 100 mL of 1.0 g sample having the compound C21H23O5N as drug is coated with sugar lactose (molar mass 342) exerts the osmotic pressure of 0.70 atm at 27°C. What is the drug percentage in sample?

Solution. Corrected: let a, b g be the amount of drug (molar mass 369) and sugar (molar mass 342) respectively.
a + b = 1.0 ...(1)
πV = (n1 + n2)ST
0.70 × (100/1000) = [a/369 + b/342] × 0.0821 × 300
∴ 342a + 369b = 358.66 ...(2)
From (1) and (2): 27b = 358.66 − 342 = 16.66, so b = 0.617 g (sugar) and a = 0.383 g (drug).
% of drug = (0.383/1) × 100 = 38.3%
(The book prints a = 0.617, b = 0.383 and gives 61.7%, which swaps the two masses. Check: 0.383/369 + 0.617/342 = 0.002842 mol, which reproduces π = 0.70 atm.)

Teacher's Note: Total osmotic pressure gives total moles; two simultaneous equations separate drug and lactose.

Exam Note: Verify by substituting back into πV = nST.

Question 12. A 5% solution (mass/vol.) of cane-sugar is isotonic with 0.877% (mass/vol.) of urea solution. Find molar mass of urea, if molar mass of sugar is 342.

Solution. For isotonic solutions, having neither dissociation nor association nature of solutes, C1 = C2, i.e. w1/(m1V1) = w2/(m2V2)
For sugar: 5/(342 × 100/1000); for urea: 0.877/(m × 100/1000)
∴ m = (0.877 × 342)/5 = 59.99 g mol-1

Teacher's Note: Isotonic non-electrolyte solutions have equal molar concentration, so equate w/(mV).

Exam Note: Equal molarity gives the unknown molar mass.

Question 13. How many g of glucose must be present in 0.5 litre of a solution for its osmotic pressure to be same as that of solution of 9.2 g of glucose per litre?

Solution. For isotonic solutions of non-electrolytes, C1 = C2
w1/(m1V1) = w2/(m2V2) or w/(180 × 0.5) = 9.2/(180 × 1)
∴ w = 4.60 g

Teacher's Note: Same osmotic pressure means same concentration, so half the volume needs half the mass.

Exam Note: Scale mass in proportion to volume.

Question 14. At 10°C, the osmotic pressure of urea solution is 500 mm. The solution is diluted and the temperature is raised to 25°C, when the osmotic pressure is found to be 105.3 mm. Determine extent of dilution.

Solution. For initial solution, π = 500/760 atm, T = 283 K: (500/760) × V1 = nST1 = nS × 283 ...(1)
After dilution, let volume become V2 and temperature be raised to 25°C, i.e. 298 K: π = 105.3/760 atm
(105.3/760) × V2 = nS × 298 ...(2)
By (1) and (2): V1/V2 = (283/298) × (105.3/500) = 1/5
∴ V2 = 5V1, i.e. the solution was diluted to 5 times.

Teacher's Note: The amount of solute is fixed, so dividing the two πV = nST relations cancels n and S.

Exam Note: Mind both temperature and pressure change.

Question 15. At 300 K, the vapour pressure of an ideal solution containing one mole of A and 3 mole of B, is 550 mm of Hg. At the same temperature, if one mole of B is added to this solution, the vapour pressure of solution increases by 10 mm of Hg. Calculate the V.P. of A and B in their pure state.

Solution. Initially, PM = P°A·XA + P°B·XB
550 = P°A·(1/(1+3)) + P°B·(3/(1+3)) or P°A + 3P°B = 2200 ...(1)
When one mole of B is further added: 560 = P°A·(1/(1+4)) + P°B·(4/(1+4)), so P°A + 4P°B = 2800 ...(2)
Solving (1) and (2): P°A = 400 mm, P°B = 600 mm.

Teacher's Note: Two compositions give two Raoult equations in the two unknown pure vapour pressures.

Exam Note: Write total pressure with mole fractions both times.

Question 16. Cyclohexane and ethanol at a particular temperature have vapour pressure of 280 mm and 168 mm respectively. If these two solutions having mole fraction value of cyclohexane equal to 0.32 are mixed and the mixture has a total vapour pressure of 376 mm, will the mixture be an ideal solution?

Solution. Mole fraction of cyclohexane = 0.32
∴ Mole fraction of ethanol = 1 − 0.32 = 0.68
Thus, PM = P°C·XC + P°E·XE
P = 280 × 0.32 + 168 × 0.68 = 203.84 mm
For the solution to be an ideal one, the vapour pressure should be 203.84 mm but the given value of vapour pressure is 376 mm, so the solution is non-ideal (positive deviation).

Teacher's Note: Compare the Raoult-law prediction with the observed total pressure; a higher observed value means positive deviation.

Exam Note: Always compute the ideal value first.

Question 17. The vapour pressure of benzene and toluene at 20°C are 75 mm of Hg and 22 mm of Hg respectively. 23.4 g of benzene and 64.4 g of toluene are mixed. If two form ideal solution, calculate the mole fraction of benzene in the vapour phase when vapours are in equilibrium with liquid mixture.

Solution. Mole of C6H6 = 23.4/78 = 0.3; Mole of C7H8 = 64.4/92 = 0.7
Mole fraction of C6H6 = 0.3/(0.3 + 0.7) = 0.3; mole fraction of C7H8 = 0.7
According to Raoult's law for liquid mixtures: PM = 75 × 0.3 + 22 × 0.7 = 22.5 + 15.4 = 37.9 mm
From Dalton's law: partial V.P. of C6H6 = PM × mole fraction of C6H6 in vapour phase
22.5 = 37.9 × Ybenzene ∴ mole fraction of C6H6 in vapour phase = 22.5/37.9 = 0.59
Mole fraction of C7H8 in vapour phase = 0.41

Teacher's Note: Combine Raoult for liquid composition with Dalton for vapour composition; the more volatile benzene is enriched in vapour.

Exam Note: Vapour fraction = partial pressure / total pressure.

Question 18. Benzene and toluene form two ideal solutions A and B at 313 K. Solution A contains 4 mole of toluene and one mole of C6H6. Solution B contains equal masses of toluene and benzene. Calculate total pressure in each case. The vapour pressure of C6H6 and toluene are 160 and 60 mm respectively at 313 K.

Solution. A: XB = 1/(1+4), XT = 4/(1+4)
PM = P°B·XB + P°T·XT = 160 × (1/5) + 60 × (4/5) = 32 + 48 = 80 mm
B: equal masses w of each are mixed: PM = 160 × (w/78)/(w/78 + w/92) + 60 × (w/92)/(w/78 + w/92)
= 160 × (92/170) + 60 × (78/170) = 86.588 + 27.529 = 114.117 mm

Teacher's Note: Equal masses mean unequal mole counts; the lighter benzene has the larger mole fraction in B.

Exam Note: Convert masses to moles before mole fractions.

Question 19. The vapour pressures of pure ethylene bromide and propylene bromide are 170 and 127 mm of Hg at a temperature. Find out the vapour pressure of ethylene bromide in a 60% by mass solution of ethylene bromide in propylene bromide at same temperature. Also report the vapour pressure of propylene bromide as well as total vapour pressure of solution.

Solution. Molar mass of C2H4Br2 = 188, molar mass of C3H6Br2 = 202; mass of C2H4Br2 = 60 g, mass of C3H6Br2 = 40 g
P′C2H4Br2 = P° × mole fraction = 170 × (60/188)/(60/188 + 40/202) = 104.9 mm
P′C3H6Br2 = 127 × (40/202)/(60/188 + 40/202) = 48.63 mm
PM = 104.9 + 48.63 = 153.53 mm

Teacher's Note: Take 100 g of solution, convert to moles, then use partial pressure = P° × mole fraction.

Exam Note: Total pressure is the sum of two partial pressures.

Question 20. An aqueous solution containing liquid A (Molar mass = 128) 64% by mass has a V.P. of 145 mm. Find the V.P. of A, if that of water is 155 mm at the same temperature.

Solution. According to Raoult's law for liquid mixtures: PM = P′A + P′B
PM = P°A × (wA/mA)/(wA/mA + wB/mB) + P°B × (wB/mB)/(wA/mA + wB/mB)
Given wA = 64 g, wH2O = 36 g, PM = 145 mm, P°H2O = 155 mm, mA = 128, mH2O = 18
145 = P°A × (64/128)/(64/128 + 36/18) + 155 × (36/18)/(64/128 + 36/18)
145 = 0.2 P°A + 124, so P°A = 105 mm

Teacher's Note: Take 100 g of solution: 0.5 mol A and 2 mol water, then solve Raoult for P°A.

Exam Note: Use mole fractions, not mass fractions.

Question 21. A mixture of ethyl alcohol and propyl alcohol has a V.P. of 290 mm at 27°C. If mole fraction of ethyl alcohol is 0.65, calculate the vapour pressure of ethyl alcohol, if vapour pressure of propyl alcohol is 210 mm.

Solution. Given P°PA = 210 mm, X1 = MFEA = 0.65, so X2 = MFPA = 0.35, PM = 290 mm
PM = P°EA × XEA + P°PA × XPA
290 = P°EA × 0.65 + 210 × 0.35
∴ P°EA = 333.1 mm

Teacher's Note: Direct Raoult mixture equation; solve linearly for the unknown pure vapour pressure.

Exam Note: Use XPA = 1 − 0.65 = 0.35.

Question 22. A solution of A and B with 30% mole in solution is in equilibrium with its vapour which contains 60% mole of A. Assuming ideal nature, calculate the ratio of the vapour pressure of pure A to that of pure B.

Solution. P°A·XA(L.P.) = PM · X′A(V.P.)
P°A × 30/100 = PM × 60/100; P°B × 70/100 = PM × 40/100
∴ (P°A × 30)/(P°B × 70) = 60/40
∴ P°A/P°B = (60 × 70)/(30 × 40) = 3.5

Teacher's Note: Equate pi = P°xi = PMyi for both components and divide.

Exam Note: Liquid and vapour fractions of each component are linked.

Question 23. The mole fraction of CCl4(g) in the vapour in equilibrium with liquid mixture of CCl4 and SiCl4 is 0.3474. The vapour pressure of SiCl4 and CCl4 are 238.3 and 114.9 mm respectively at the same temperature. Calculate % by mass of CCl4 in liquid mixture.

Solution. XCCl4(g) = 0.3474, XSiCl4(g) = 0.6526; P°SiCl4 = 238.3 mm, P°CCl4 = 114.9 mm
P°CCl4·XCCl4(l) = PM × XCCl4(g) ∴ 114.9 × XCCl4(l) = PM × 0.3474 ...(1)
Also 238.3 × XSiCl4(l) = PM × 0.6526 ...(2)
By (1) and (2): XCCl4(l)/XSiCl4(l) = (0.3474/0.6526) × (238.3/114.9) = 1.104
Let a g CCl4 and b g SiCl4 be present in liquid; (a/154)/(b/170) = 1.104, so a/b = 1
Thus 50% by mass of CCl4 liquid is present in mixture.

Teacher's Note: Divide the two vapour-liquid relations to get the liquid mole ratio, then convert to mass ratio.

Exam Note: Convert mole ratio to mass with 154 and 170.

Question 24. The molar volume of liquid benzene (density = 0.877 g mL-1) increases by a factor of 2750 as it vaporises at 20°C and that of liquid toluene (density 0.867 g mL-1) increases by a factor of 7720 at 20°C. A solution of benzene and toluene at 20°C has a vapour pressure of 46.0 torr. Find the mole fraction of benzene in the vapour above the solution. (IIT 1996)

Solution. In vapour phase, 1 mole or 78 g benzene has volume at 20°C = (78/0.877) × 2750 mL.
Similarly, 1 mole or 92 g toluene has volume at 20°C = (92/0.867) × 7720 mL.
From PV = nRT: (P°B/760) × (78 × 2750)/(0.877 × 1000) = 1 × 0.0821 × 293 ∴ P°B = 74.74 mm
Similarly (P°T/760) × (92 × 7720)/(0.867 × 1000) = 1 × 0.0821 × 293 ∴ P°T = 22.3 mm
PM = P°BXB + P°T(1 − XB): 46 = 74.74 XB + 22.3(1 − XB) ∴ XB = 0.45 (in liquid phase), XT = 0.55
Also P′B = P°BXB = PM·X′B, or 74.74 × 0.45 = 46 · X′B
∴ X′B (in gas phase) = 0.73

Teacher's Note: Molar volume of vapour from the expansion factor gives P° through PV = nRT; then Raoult plus Dalton.

Exam Note: Find both P° values before the composition.

Question 25. At 90°C, the vapour pressure of toluene is 400 mm and that of xylene is 150 mm. What is the composition of liquid mixture that will boil at 90°C when the pressure of mixture is 0.5 atm?

Solution. The solution boils at 0.5 atm and thus, V.P. of mixture = 760/2 mm = 380 mm
PM = P°T·XT + P°xylene·Xxylene
380 = 400 XT + 150(1 − XT) (∵ XT + Xxylene = 1)
∴ Xtoluene = 0.92 and Xxylene = 0.08

Teacher's Note: Boiling occurs when total vapour pressure equals external pressure, here 380 mm.

Exam Note: Convert 0.5 atm to 380 mm first.

Question 26. An organic liquid A, is immiscible with water. When boiled together with water, the boiling point is 90°C at which the partial vapour pressure of water is 526 mm Hg. The superincumbent (atmospheric) pressure is 736 mm Hg. The mass ratio of the liquid and water collected was 2.5 : 1. What is the molar mass of the liquid?

Solution. At boiling point Pmixture = 736 mm; P′H2O = 526 mm
∴ P′A = 736 − 526 = 210 mm
For immiscible liquids, moles in vapour are in the ratio of partial pressures: wA/m : wwater/18 = 210 : 526
Mass ratio wA/wwater = 2.5/1, so 2.5 × 18/m = 210/526 (as in the book: 210/526 = (18 × 2.5)/m)
∴ m = 112.7 g mol-1

Teacher's Note: Steam distillation: ratio of masses = (P′AMA)/(P′wMw); first get P′A = total − P′water.

Exam Note: Total pressure equals the sum of both partial pressures.

Question 27. A mixture of two immiscible liquids nitrobenzene and water boiling at 99°C has a partial vapour pressure of water 733 mm and that of nitrobenzene 27 mm. Calculate the ratio of the mass of nitrobenzene to the water in distillate.

Solution. P′ = PM · X′A, where X′A is mole fraction in gaseous phase (w1 = mass of water, w2 = mass of nitrobenzene, molar mass 123)
27 = 760 · (w2/123)/(w1/18 + w2/123) (for nitrobenzene)
733 = 760 · (w1/18)/(w1/18 + w2/123) (for water)
∴ w1/w2 = 4, i.e. mass of nitrobenzene : mass of water = 1 : 4 (about 0.25)

Teacher's Note: Partial pressures are proportional to moles in the distillate; convert to mass with 123 and 18.

Exam Note: State the ratio as nitrobenzene to water.

Question 28. A mixture of chlorobenzene and water (immiscible) boils at 90.3°C at an external pressure of 740.2 mm. The vapour pressure of pure water at 90.3°C is 530.1 mm. Calculate the % composition of distillate.

Solution. At boiling point P′M = 740.2 mm; P′H2O = 530.1 mm
∴ P′chlorobenzene = 740.2 − 530.1 = 210.1 mm
Also P′ = PM × mole fraction: 530.1 = 740.2 × mole fraction of H2O, so mole fraction of H2O = 0.716 and mole fraction of C6H5Cl = 0.284
Let a g H2O and b g chlorobenzene (112.5) be present in distillate:
(a/18)/(a/18 + b/112.5) = 0.716 ...(1); (b/112.5)/(a/18 + b/112.5) = 0.284 ...(2)
By (1)/(2): (a/b) × (112.5/18) = 0.716/0.284, so a/b = 0.403 ...(3)
Let total mass of distillate be 100 g: a + b = 100 ...(4)
By (3) and (4): a = 28.73, b = 71.27
Distillate: 28.73% water and 71.27% chlorobenzene (by mass)

Teacher's Note: Find vapour mole fractions from partial pressures, then convert to mass with 18 and 112.5.

Exam Note: Report percent by mass, not mole fraction.

Question 29. Dichlorodifluoro methane, CCl2F2, one of the chlorofluoro refrigerant responsible for destroying part of the earth's ozone layer has P(vap) = 40.0 mm Hg at −81.6°C and P(vap) = 400 mm Hg at −43.9°C. What is the normal boiling point of CCl2F2 in °C?

Solution. 2.303 log(P2/P1) = (ΔH/R)[(T2 − T1)/(T1T2)]
2.303 log(400/40) = (ΔH/2)[(229.1 − 191.4)/(229.1 × 191.4)]
∴ ΔHvap = 5357.35 cal
Again at the normal boiling point (P = 760 mm): 2.303 log(760/400) = (5357.35/2)[(T − 229.1)/(T × 229.1)]
∴ (T − 229.1)/T = 0.055 ∴ T = 242.43 K = −30.57°C

Teacher's Note: Use Clausius-Clapeyron twice: first get ΔH from two pressures, then T at 760 mm.

Exam Note: Normal boiling point means vapour pressure 760 mm.

Question 30. The vapour pressure of pure water at 25°C is 23.62 mm. What will be the vapour pressure of a solution of 1.5 g of urea in 50 g of water?

Solution. (P° − Ps)/Ps = (w × M)/(m × W)
(23.62 − Ps)/Ps = (1.5 × 18)/(60 × 50)
∴ Ps = 23.41 mm

Teacher's Note: Dilute non-electrolyte solution: relative lowering equals (w/m)/(W/M).

Exam Note: Relative lowering depends on mole ratio only.

Question 31. Calculate the vapour pressure of solution having 3.42 g of cane-sugar in 180 g of water at 40°C and 100°C. Given that boiling point of water is 100°C and heat of vaporisation is 10 kcal mol-1 in the given temperature range. Also calculate the lowering in vapour pressure of 0.2 molal cane-sugar at 40°C.

Solution. At 100°C: vapour pressure of pure water (P°) = 760 mm
(P° − Ps)/Ps = (w × M)/(m × W): (760 − Ps)/Ps = (3.42 × 18)/(342 × 180) ∴ Ps = 759.2 mm
Also 2.303 log(P2/P1) = (ΔH/R)[(T2 − T1)/(T1T2)], P2 = 760 mm, T2 = 373 K, T1 = 313 K, ΔH = 10 kcal mol-1
2.303 log(760/P1) = (10/(2 × 10-3)) × [(373 − 313)/(373 × 313)] ∴ P1 = 58.2 mm (pure water at 40°C)
Now at 40°C, (P° − Ps)/Ps = (w × M)/(m × W); for 0.2 molal solution w/m = 0.2, W = 1000 g, M = 18: (58.2 − Ps)/Ps = (0.2 × 18)/1000 ∴ Ps = 57.99 mm (about 58.0)
ΔP = P° − Ps = 58.20 − 57.99 = 0.21 mm

Teacher's Note: First reach P° at 40°C from Clausius-Clapeyron, then apply relative lowering for the 0.2 molal solution.

Exam Note: Use R = 2 cal (or 2 × 10-3 kcal).

Question 32. The vapour pressure of pure benzene at 25°C is 639.7 mm of Hg and the vapour pressure of a solution of a solute in C6H6 at the same temperature is 631.9 mm of Hg. Calculate molality of solution.

Solution. (P° − Ps)/Ps = (w × M)/(m × W)
∴ Molality = (w/(m × W)) × 1000 = ((P° − Ps)/(Ps × M)) × 1000 = ((639.7 − 631.9)/(631.9 × 78)) × 1000 = 0.158 mol/kg of solvent

Teacher's Note: Rearrange relative lowering to give molality directly using M of the solvent.

Exam Note: Use solvent molar mass (78) here.

Question 33. What mass of solute (Molar mass 60) is required to dissolve in 180 g of water to reduce the vapour pressure to 4/5th of pure water?

Solution. (P° − Ps)/Ps = (w × M)/(m × W); Ps = 4P°/5, m = 60 g mol-1, W = 180 g, M = 18
(P° − 4P°/5)/(4P°/5) = (w × 18)/(60 × 180)
∴ w = (60 × 180)/(4 × 18) = 150 g

Teacher's Note: Ps = 4/5 P° gives relative lowering 1/4, then solve for w.

Exam Note: Relative lowering is 1/4, not 1/5.

Question 34. The vapour pressure of pure benzene at a certain temperature is 640 mm of Hg. A non-volatile non-electrolyte solid weighing 2.175 g is added to 39.0 g of benzene. The vapour pressure of the solution is 600 mm of Hg. What is the molar mass of solid substance? (IIT 1990)

Solution. P° = 640 mm, Ps = 600 mm, w = 2.175 g, W = 39.0 g, M = 78 g mol-1
(P° − Ps)/Ps = (w × M)/(m × W)
(640 − 600)/600 = (2.175 × 78)/(m × 39)
∴ m = 65.25 g mol-1

Teacher's Note: Direct use of the relative lowering formula with benzene as solvent (M = 78).

Exam Note: Substitute solvent M = 78, not solute M.

Question 35. The vapour pressure of an aqueous solution of glucose is 750 mm of Hg at 373 K. Calculate molality and mole fraction of solute.

Solution. Temperature is 373 K and b.pt. of H2O = 373 K, so vapour pressure of H2O = 760 mm
Molality = (w/(m × W)) × 1000 = ((P° − Ps)/Ps) × (1/M) × 1000 = ((760 − 750)/750) × (1000/18) = 0.741 mol/kg of solvent
Mole fraction of solute = (P° − Ps)/P° = (760 − 750)/760 = 10/760 = 0.013

Teacher's Note: At 373 K pure water is at 760 mm; mole fraction of solute equals relative lowering.

Exam Note: Pure water at 100°C has P° = 760 mm.

Question 36. The vapour pressure of water is 92.5 mm at 300 K. Calculate V.P. of 1 molal solution of a solute in it.

Solution. Corrected: (P° − Ps)/Ps = (w × M)/(m × W) = (w × M × 1000)/(m × W × 1000) = Molality × M/1000
(92.5 − Ps)/Ps = 1 × 18/1000 = 0.018
∴ Ps = 92.5/1.018 = 90.86 mm (the book prints 90.84 mm, a small arithmetic slip)

Teacher's Note: For 1 molal solution, relative lowering of dilute solution is M/1000 = 0.018.

Exam Note: Divide P° by 1.018 carefully.

Question 37. A solution containing 30 g of a non-volatile solute in exactly 90 g water has a vapour pressure of 21.85 mm of Hg at 25°C. Further 18 g of water is then added to solution, the new vapour pressure becomes 22.15 mm of Hg at 25°C. Calculate,
(a) Molar mass of solute.
(b) Vapour pressure of water at 25°C.

Solution. We have (P° − 21.85)/21.85 = (30 × 18)/(90 × m) for case I ...(1)
Now mass of solvent = 90 + 18 = 108 g: (P° − 22.15)/22.15 = (30 × 18)/(108 × m) for case II ...(2)
By (1): P°m − 21.85m = 131.1; by (2): P°m − 22.15m = 110.75
Subtracting: 0.30m = 20.35 ∴ (a) m = 20.35/0.30 = 67.83 g mol-1
Substituting m in (1): (P° − 21.85)/21.85 = (30 × 18)/(90 × 67.83) ∴ (b) P° = 23.78 mm

Teacher's Note: Two vapour pressures with two solvent masses give two equations in P° and m; subtract to eliminate P°.

Exam Note: Eliminate P° by subtracting the two equations.

Question 38. The vapour pressure of an aqueous solution at 20°C is 17 mm and that of pure water at same temperature is 17.39 mm. Calculate, (i) Density of water vapours at this temperature, (ii) Osmotic pressure of solution assuming molarity and molality same.

Solution. (i) For water vapours: PV = (w/m)RT
w/V = d = Pm/(RT) = (17.39 × 18)/(760 × 0.0821 × 293) = 0.0171 g/litre
(ii) (P° − Ps)/Ps = (w × M × 1000)/(m × W × 1000)
Molality = (w/(m × W)) × 1000 = ((17.39 − 17)/17) × (1000/18) = 1.275 = molarity (n/V)
∴ π = (n/V) × S × T = 1.275 × 0.0821 × 293 = 30.67 atm

Teacher's Note: Vapour density from the ideal gas law; molality from relative lowering then reused as molarity in π = CST.

Exam Note: Convert mm to atm before using R = 0.0821.

Question 39. The vapour pressure of water at 293 K is 2338 Pa and the vapour pressure of an aqueous solution is 2295.8 Pa. If density of solution is 1010 kg/m3 at 313 K, calculate the osmotic pressure at 313 K. Molar mass of solute = 60.

Solution. At 293 K: (P° − Ps)/Ps = n/N = (n × 18)/W
(2338 − 2295.8)/2295.8 = (n × 18)/W ∴ n/W = (42.2/2295.8) × (1/18), i.e. W = 979.25n g
Mass of solution = 979.25n + 60n = 1039.25n g = 1.0393n kg
Volume of solution (at 313 K) = mass/density = 1.0393n/1010 m3
PV = nST: P × (1.0393n/1010) = n × 8.314 × 313
∴ P = 2.53 × 106 Pa

Teacher's Note: Relative lowering gives solvent mass per mole of solute; density then gives solution volume for π = nST/V.

Exam Note: Use SI units: Pa, m3, kg/m3.

Question 40. Calculate the relative lowering in V.P. if 10 g of a solute (molar mass 100) are dissolved in 180 g water.

Solution. (P° − Ps)/P° = n/(n + N) = (w/m)/(w/m + W/M) = (10/100)/(10/100 + 180/18) = 0.0099

Teacher's Note: Relative lowering equals mole fraction of solute, 0.1/(0.1 + 10).

Exam Note: Mole fraction of solute equals relative lowering.

Question 41. At 50°C the vapour pressure of pure water and ethyl alcohol are 92.5 and 219.9 mm of Hg respectively. If 6 g of non-volatile solute of molar mass 120 are dissolved in 150 g of each of these solvent, what will be the ratio of relative vapour pressure lowering in two solvents?

Solution. (P° − Ps)/P° = n/(n + N) = (w/m)/(w/m + W/M)
For H2O: (P° − Ps)/P° = (6/120)/(6/120 + 150/18)
For C2H5OH: (P° − Ps)/P° = (6/120)/(6/120 + 150/46)
∴ Ratio of ((P° − Ps)/P°) for H2O and C2H5OH = [(6/120)/(6/120 + 150/18)] / [(6/120)/(6/120 + 150/46)] = 0.3949

Teacher's Note: Relative lowering depends only on mole fractions, not on the pure vapour pressures given.

Exam Note: Vapour pressures given are distractors here.

Question 42. 0.1 M solution of glucose was found to be isotonic with a solution of X in 100 g water. Calculate relative lowering in vapour pressure of solution of X in water.

Solution. Given that 0.1 M glucose is isotonic with solution of X in water. Thus, concentration of solution of X = 0.1 mol per litre.
For dilute solution: volume of solution = volume of solvent (H2O) = weight of H2O
∴ Mole of X = 0.1; Mole of water = 1000/18
(P° − Ps)/P° = n/(n + N) = 0.1/(0.1 + 1000/18) = 0.0018

Teacher's Note: Isotonic means equal molarity; for a dilute solution take one litre of solution as about 1000 g water.

Exam Note: Equal osmotic pressure gives equal concentration.

Question 43. Calculate the mass of a non-volatile solute (molar mass 40), which should be dissolved in 114 g octane to reduce its vapour pressure to 80%.

Solution. Given Ps = (80/100)P°, w = ?, m = 40, W = 114 g, M = 114 (octane)
(P° − Ps)/Ps = (w × M)/(m × W)
(P° − (80/100)P°)/((80/100)P°) = (w × 114)/(40 × 114)
∴ w = 40/4 = 10 g

Teacher's Note: Relative lowering 0.2/0.8 = 1/4 and M, W of octane cancel, leaving w = m/4.

Exam Note: Octane M and W cancel in this problem.

Question 44. What mass of non-volatile solute, urea (NH2CONH2) needs to be dissolved in 100 g of water, in order to decrease the vapour pressure of water by 25%? What will be the molality of solution?

Solution. According to Raoult's law: (P° − Ps)/Ps = (w/m) × (M/W)
Given if P° = 100, then Ps = 75 mm, m = 60, M = 18, W = 100 g
(100 − 75)/75 = (w × 18)/(60 × 100) ∴ w = 111.11 g
Molality (not printed in the book; worked here) = (111.11/60)/0.100 kg = 18.52 mol/kg

Teacher's Note: A 25% fall means Ps = 0.75P°; relative lowering 1/3 gives the large mass of urea.

Exam Note: Molality uses kg of solvent: 0.100 kg.

Question 45. Dry air was successively passed through a solution of 5 g solute in 80 g water and then through pure water. The loss in mass of solution was 2.5 g and that of pure water was 0.04 g. What is molar mass of solute?

Solution. Loss in mass of solution ∝ Ps; loss in mass of solvent ∝ P° − Ps
∴ (P° − Ps)/Ps = (loss in mass of solvent)/(loss in mass of solution) ...(1)
Also (P° − Ps)/Ps = (w × M)/(m × W) ...(2)
By (1) and (2): 0.04/2.5 = (5 × 18)/(80 × m)
∴ m = 70.31 g mol-1

Teacher's Note: Ostwald-Walker method: loss from solution tracks Ps, loss from pure water tracks P° − Ps.

Exam Note: Identify which loss gives Ps and which gives lowering.

Question 46. Calculate the vapour pressure lowering of a 0.10 m aqueous solution of non-electrolyte at 75°C.

Solution. At 100°C: P2 = 760 mm; ΔHvap. = 540 × 18 cal/mol = 9720 cal/mol
2.303 log(P2/P1) = (ΔH/R)[(T2 − T1)/(T1T2)]
log(P2/P1) = (9720/(1.987 × 2.303)) × [(373 − 348)/(373 × 348)]
∴ P2/P1 = 2.57 ∴ P1 = 760/2.57 = 295.7 mm (or P°)
Now (P° − Ps)/Ps = n/N = 0.1/(1000/18) = 1.8/1000, so P°/Ps − 1 = 1.8/1000, Ps = (P° × 1000)/1001.8 = (295.7 × 1000)/1001.8 = 295.17
ΔP = 295.7 − 295.17 = 0.53 mm

Teacher's Note: Get P° at 75°C from Clausius-Clapeyron with 760 mm at 100°C, then apply relative lowering for 0.10 m.

Exam Note: P° at 75°C must be computed first.

Question 47. A very small amount of a non-volatile solute (that does not dissociate) is dissolved in 56.8 cm3 of benzene (density 0.889 g cm-3). At room temperature, vapour pressure of this solution is 98.88 mm Hg while that of benzene is 100 mm Hg. Find the molality of this solution. If the freezing temperature of this solution is 0.73 degree lower than that of benzene, what is the value of molal freezing point depression constant of benzene? (IIT May 1997)

Solution. (P° − Ps)/Ps = (w/m) × (M/W), so (100 − 98.88)/98.88 = (w × 78 × 1000)/(m × W × 1000)
Molality = (w × 1000)/(m × W) = (1.12 × 1000)/(78 × 98.88) = 0.1452 m
Also ΔT = K′f × molality: 0.73 = K′f × 0.1452
∴ K′f = 5.028 K molality-1

Teacher's Note: Molality follows directly from relative lowering and solvent M; then Kf = ΔT/molality.

Exam Note: Solvent volume is not needed once relative lowering is used.

Question 48. An aqueous solution of glucose containing 12 g in 100 g of water was found to boil at 100.34°C. Calculate K′b for water in K mol-1 kg.

Solution. Given b.pt. of water = 100°C, b.pt. of solution = 100.34°C
Elevation in b.pt., ΔT = 0.34, w = 12 g, W = 100 g, m = 180
ΔT = (1000 K′b w)/(mW)
0.34 = (1000 × K′b × 12)/(180 × 100)
∴ K′b = 0.51 K mol-1 kg

Teacher's Note: Rearrange ΔTb = 1000Kbw/(mW) to solve for Kb.

Exam Note: Boiling elevation is 0.34, not 100.34.

Question 49. 20 mL of ethanol (density 0.7893 g/mL) and 40 mL of H2O (density 0.9971 g/mL) at 25°C are mixed to have a mixture (density 0.9571 g/mL). Calculate the per cent change in volume after mixing. Also report molality and molarity of alcohol and deviation from Raoult's law.

Solution. wEA = 20 × 0.7893 = 15.786 g; wH2O = 40 × 0.9971 = 39.884 g
∴ wmixture = 55.670 g ∴ Vmixture = 55.67/0.9571 = 58.165 mL
∴ % change in volume = [(60 − 58.165)/60] × 100 = 3.058 (contraction)
Molality of alcohol = (15.786/46)/(39.884/1000) = 8.6 m
Molarity of alcohol = (15.786/46)/(58.165/1000) = 5.90 M
ΔVmixing = 58.165 − 60 = −1.835 mL, i.e. negative deviation from Raoult's law.

Teacher's Note: Compare actual mixture volume (mass/density) with the 60 mL ideal sum; contraction shows negative deviation.

Exam Note: Molality uses solvent mass; molarity uses solution volume.

Question 50. The boiling point of CHCl3 was raised by 0.323°C when 0.5143 g of anthracene was dissolved in 35 g CHCl3. Calculate the molar mass of anthracene. K′b for CHCl3 = 3.9 K mol-1 kg.

Solution. w = 0.5143 g, W = 35 g, K′b = 3.9 K mol-1 kg, ΔT = 0.323°C
ΔT = (1000 K′b w)/(mW)
0.323 = (1000 × 3.9 × 0.5143)/(m × 35)
∴ m = 177.42 g mol-1

Teacher's Note: Plain boiling-point-elevation formula solved for molar mass.

Exam Note: Use solvent mass W in grams with the factor 1000.

Question 51. What will be the boiling point of bromine when 174.5 mg of octa atomic sulphur is added to 78 g of bromine? K′b for Br2 is 5.2 K mol-1 kg and b. pt. of Br2 is 332.15 K.

Solution. w = 174.5 × 10-3 g, W = 78 g, m = 8 × 32 = 256 (∵ octa atomic), K′b = 5.2
∴ ΔT = (1000 K′b w)/(Wm) = (1000 × 5.2 × 174.5 × 10-3)/(78 × 256) = 0.045
∴ Boiling point of Br2 solution = 332.15 + ΔT = 332.15 + 0.045 = 332.195 K

Teacher's Note: Octa-atomic sulphur is S8 with molar mass 256; add the small elevation to the pure boiling point.

Exam Note: Convert mg to g and use M = 256.

Question 52. 0.48 g of a substance was dissolved in 10.6 g C6H6. The freezing point of benzene was lowered by 1.8°C. Calculate molar mass of the substance. Molecular depression constant for benzene is 50 K mol-1 100 g.

Solution. ΔT = (100 Kf w)/(mW)
w = 0.48 g, W = 10.6 g, ΔTf = 1.8, Kf = 50
1.8 = (100 × 50 × 0.48)/(m × 10.6)
∴ m = 125.79 g mol-1

Teacher's Note: Kf here is per 100 g, so the multiplying factor is 100, not 1000.

Exam Note: Check Kf units: per 100 g uses 100.

Question 53. One mole of triphenyl methanol lowers the freezing point of 1000 g of 100% sulphuric acid twice as much as one mole of methanol. Why?

Solution. MeOH + H2SO4 ⇌ MeOH2+ + HSO4− (two ions)
Ph3C·OH + H2SO4 ⇌ Ph3COH2+ + HSO4−
Ph3COH2+ ⇌ Ph3C+ + H2O
H2O + H2SO4 ⇌ H3O+ + HSO4−
Net: Ph3COH + 2H2SO4 ⇌ Ph3C+ + H3O+ + 2HSO4− (four ions)
Since number of ions are doubled in Ph3COH (four ions against two for methanol) and so depression is two times more for same number of mole of each.

Teacher's Note: Freezing point depression depends on number of particles; triphenylmethanol yields four ions, methanol only two.

Exam Note: Count ions produced per mole of solute.

Question 54. Menthol is a crystalline substance with a peppermint taste. A 6.2% (mass/mass) solution of menthol in cyclohexane freezes at −19.5°C. Determine molar mass of menthol. The freezing point and molal depression constant of cyclohexane are 6.5°C and 20.2 K molality-1.

Solution. Wmenthol = 6.2 g; Wcyclohexane = 100 − 6.2 = 93.8 g
ΔTf = 6.5 − (−19.5) = 26.0; K = 20.2 K molality-1
ΔTf = (1000 × Kf × w)/(W × m)
m = (1000 × 20.2 × 6.2)/(93.8 × 26.0) = 51.35 g mol-1 (with the data given in the question)

Teacher's Note: Take 100 g of solution: 6.2 g solute and 93.8 g solvent; ΔT is 26.0 K.

Exam Note: Solvent mass is 93.8 g, not 100 g.

Question 55. How much ethyl alcohol must be added to 1.00 litre of water so that the solution will freeze at 14°F? (Kf for water = 1.86°C/mol)

Solution. (F − 32)/9 = C/5 (conversion of °F scale to °C scale)
(14 − 32)/9 = C/5 ∴ C = −10°C ∴ ΔT = 10
Now ΔT = Kf × molality: 10 = 1.86 × w/(46 × 1)
∴ w = 247.31 g

Teacher's Note: Convert 14°F to −10°C first, then use molality with 1 kg of water.

Exam Note: Fahrenheit conversion comes before ΔTf.

Question 56. An aqueous solution containing 5% by mass of urea and 10% by mass of glucose. What will be its freezing point? K′f for H2O is 1.86 K mol-1 kg.

Solution. ∵ Solution has 5% by mass urea and 10% by mass glucose; % by mass = (mass of solute/mass of solution) × 100
∴ Mass of water = 85 g; mass of urea = 5 g; mass of glucose = 10 g
ΔT = ΔTUrea + ΔTGlucose = (1000 × 1.86 × 5)/(60 × 85) + (1000 × 1.86 × 10)/(180 × 85) = 1.824 + 1.216 = 3.04
Freezing point = 0 − 3.04 = −3.04°C

Teacher's Note: Depressions from non-interacting non-electrolytes add; use 100 g of solution as basis.

Exam Note: Add depressions from both solutes.

Question 57. An aqueous solution of glucose boils at 100.01°C. The molal elevation constant for water is 0.5 K mol-1 kg. What is the number of glucose molecules in the solution containing 100 g water?

Solution. ΔT = (1000 K′b w)/(mW): 0.01 = (1000 × 0.5 × w)/(180 × 100) ∴ w = 0.36 g
∵ 180 g glucose contains 6.023 × 1023 molecules
∴ 0.36 g glucose contains (6.023 × 1023 × 0.36)/180 = 1.2 × 1021 molecules

Teacher's Note: Find mass of glucose from ΔTb, then convert mass to molecules with Avogadro number.

Exam Note: Moles times NA gives number of molecules.

Question 58. 1.4 g of acetone dissolved in 100 g of benzene gave a solution which freezes at 277.12 K. Pure benzene freezes at 178.4 K [as printed; the book solution uses 278.40 K, so 178.4 is a misprint for 278.4 K]. 2.8 g of a solid (A) dissolved in 100 g of benzene gave a solution which froze at 277.76 K. Calculate the molar mass of (A). (Roorkee 2000)

Solution. For acetone + benzene mixture: ΔT = (K′f × 1000 × w)/(m × W)
(278.40 − 277.12) = (1000 × Kf × 1.4)/(100 × 58), i.e. 1.28 = (1000 × Kf × 1.4)/(100 × 58) ...(1)
For solute (A) + benzene mixture (let m be the molar mass of A): (278.40 − 277.76) = (1000 × Kf × 2.8)/(100 × m), i.e. 0.64 = (1000 × Kf × 2.8)/(100 × m) ...(2)
By (1) and (2): m = 232 g mol-1

Teacher's Note: Acetone (M = 58) calibrates Kf of benzene; divide the two ΔT equations to cancel it.

Exam Note: Pure benzene freezes at 278.4 K; ΔT values are 1.28 and 0.64.

Question 59. Two elements A and B form compounds having molecular formula AB2 and AB4. When dissolved in 20 g C6H6, 1 g of AB2 lowers the f. pt. by 2.3°C whereas 1.0 g of AB4 lowers it by 1.3°C. The Kf for C6H6 is 5.1 K mol-1 kg. Calculate atomic mass of A and B.

Solution. ΔT = (1000 K′f w)/(mW)
For AB2: 2.3 = (1000 × 5.1 × 1)/(m1 × 20) ∴ m1 = 110.87 g mol-1
For AB4: 1.3 = (1000 × 5.1 × 1)/(m2 × 20) ∴ m2 = 196.15 g mol-1
m1 is molar mass of AB2, so a + 2b = 110.87; m2 is molar mass of AB4, so a + 4b = 196.15 (a and b are atomic masses of A and B)
∴ a = 25.59 g/mol, b = 42.64 g/mol

Teacher's Note: Two molar masses give two linear equations in the atomic masses; subtract to get B.

Exam Note: Subtract equations to isolate atomic mass of B.

Question 60. The freezing point of a solution containing 50 cm3 of ethylene glycol in 50 g of water is found to −34°C. Assuming ideal behaviour calculate the density of ethylene glycol. (K′f for water = 1.86 K kg mol-1) (Roorkee 1999)

Solution. Given ethylene glycol = 50 cm3; K′f = 1.86 K mol-1 kg
Mass of glycol = 50 × d, where d is density of glycol; mass of water = 50 g; ΔTf = 34°C; m (ethylene glycol) = 62
ΔTf = (1000 K′f w)/(mW): 34 = (1000 × 1.86 × 50 × d)/(62 × 50)
∴ d = 1.133 g/cm3

Teacher's Note: Mass of glycol is volume times unknown density; solve the freezing depression equation for d.

Exam Note: Express glycol mass as 50d grams.

Question 61. A solution of 0.643 g of an organic compound in 50 mL of benzene (density 0.879 g/mL) lowered its freezing point from 5.51°C to 5.03°C. Calculate the molar mass of solid. Kf for benzene is 5.12 K mol-1 kg. (IIT 1992)

Solution. Answer (from book): m = 156.06 g mol-1. (Working, not printed in the book: mass of benzene = 50 × 0.879 = 43.95 g; ΔTf = 5.51 − 5.03 = 0.48 K; m = (1000 × 5.12 × 0.643)/(0.48 × 43.95) = 156.06 g mol-1.)

Teacher's Note: Convert benzene volume to mass using density, then apply the freezing-point depression formula.

Exam Note: Solvent mass comes from volume times density.

Question 62. A motor vehicle radiator was filled with 8 litre of water to which 2 litre of methyl alcohol (density 0.8 g/mL) were added. What is the lowest temperature at which the vehicle can be parked out doors without a danger that the water in radiator will freeze? K′f for H2O is 1.86 K mol-1 kg.

Solution. Given w = 2000 × 0.8 g, W = 8000 × 1 g, K′f = 1.86 K mol-1 kg, m = 32 for CH3OH
ΔT = (1000 × 1.86 × 2000 × 0.8)/(32 × 8000) = 11.625
∴ F. pt. of solution = 0 − 11.625 = −11.625°C
∴ Vehicle may be parked out door not below −11.625°C.

Teacher's Note: Mass of methanol = volume times density; freezing point is 0 minus the depression.

Exam Note: Water mass 8000 g; methanol mass 1600 g.

Question 63. A mixture which contains 0.550 g of camphor and 0.090 g of an organic solute melts at 161°C. The solute contains 93.75% C and 6.25% H by mass. What is the molecular formula of compound? K′f for camphor is 37.5°C mol-1 kg. The m. pt. of camphor is 209°C.

Solution. ΔT = (1000 K′f w)/(mW); ΔT = 209 − 161 = 48°C, w = 0.09 g, W = 0.55 g, K′f = 37.5
48 = (1000 × 37.5 × 0.09)/(m × 0.55) ∴ m = 127.84 g mol-1
C = 93.75/12 = 7.8125 (ratio 1.25); H = 6.25/1 = 6.25 (ratio 1) ∴ C : H = 1.25 : 1 or 5 : 4
Empirical formula is C5H4, empirical formula mass = 64
Molecular formula is (C5H4)n, n = 127.84/64 ≈ 2
∴ Molecular formula of solute is (C5H4)2 = C10H8

Teacher's Note: Camphor (large Kf) gives molar mass by Rast method; empirical formula from percentages then fixes n.

Exam Note: Combine molar mass with empirical formula mass.

Question 64. If boiling point of an aqueous solution is 100.1°C. What is its freezing point? Given latent heat of fusion and vaporization of water are 80 cal g-1 and 540 cal g-1 respectively.

Solution. For a given aqueous solution ΔTb = K′b × molality and ΔTf = K′f × molality
∴ ΔTb/ΔTf = K′b/K′f = (RTb2/1000lv) × (1000lf/RTf2) = (Tb2 × lf)/(Tf2 × lv)
Tb = 100 + 273 = 373 K, Tf = 0 + 273 = 273 K, lf = 80 cal g-1, lv = 540 cal g-1
0.1/ΔTf = (373 × 373 × 80)/(273 × 273 × 540) ∴ ΔTf = 0.362
∴ Tf = 0.0 − 0.362 = −0.362°C

Teacher's Note: Same molality gives same solution for both; the ratio ΔTb/ΔTf is fixed by T and latent heats.

Exam Note: Take ratio of the two constants; molality cancels.

Question 65. Calculate the freezing point of an aqueous solution having mole fraction of water 0.8. Latent heat of fusion of ice is 1436.3 cal mol-1.

Solution. Given lf = 1436.3 cal/mole = 1436.3/18 cal/g
K′f = RT2/(1000 lf) = (2 × 273 × 273)/(1000 × 1436.3/18) = 1.87
Mole fraction of H2O = 0.8 = N/(n + N); mole fraction of solute = 0.2 = n/(n + N)
∴ n/N = 0.2/0.8 = 1/4, or (w × M)/(m × W) = 1/4, i.e. w/(m × W) = 1/(4 × 18)
ΔT = (1000 × K′f × w)/(m × W) = 1000 × 1.87 × (1/(4 × 18)) = 25.97°C (using K′f = 1.868 gives 25.94°C)
∴ F. pt. = 0 − 25.97 = −25.97°C

Teacher's Note: Derive Kf from latent heat per gram, then convert mole fraction 0.2 to molality.

Exam Note: Latent heat must be per gram for Kf.

Question 66. Two solutions of non-volatile solutes A and B having molar mass ratio of A and B (MA/MB) as 1/3 are prepared by dissolving 5% (mass/vol.) of each in water. Calculate the ratio of freezing point depression. If the two solutions are mixed to prepare a new solution (S1) by mixing in the ratio 2 : 3 by volume and another new solution (S2) is obtained by mixing in the ratio 3 : 2, find out (ΔTf)S1/(ΔTf)S2. Assume density of solution A and B equal to one.

Solution. Corrected (second part): For 5% solution of A: (ΔTf)A = (Kf × 5 × 1000)/(mA × 95) ...(1); for B: (ΔTf)B = (Kf × 5 × 1000)/(mB × 95) ...(2)
By (1) and (2): (ΔTf)A/(ΔTf)B = mB/mA = 3 (∵ mA/mB = 1/3)
For solution S1: mix 2V mL of A and 3V mL of B. Mass of A = 5 × 2V/100 = 0.1V g; mass of B = 5 × 3V/100 = 0.15V g. Total mass of solution = 5V g, so mass of water = 5V − 0.25V = 4.75V g.
(ΔTf)S1 = 1000Kf[0.1V/mA + 0.15V/mB]/(4.75V) = 1000Kf(0.1mB + 0.15mA)/(4.75 mAmB)
For solution S2 (3V mL A + 2V mL B): (ΔTf)S2 = 1000Kf(0.15mB + 0.10mA)/(4.75 mAmB)
Ratio = (0.1mB + 0.15mA)/(0.15mB + 0.10mA); put mB = 3mA: = (0.45mA)/(0.55mA) = 0.818 (about 0.82)
(The book prints the solvent masses as 4.9V and 4.85V and gets 0.81; the solvent in each mixture is 4.75V g.)

Teacher's Note: Depression is inversely proportional to molar mass; mixing changes both moles of solute and the water mass.

Exam Note: Solvent mass = solution mass minus both solute masses.

Question 67. Calculate the entropy change for vaporisation of water if latent heat of vaporisation for water is 540 cal/g. Given Kb for H2O = 0.51 K/molality.

Solution. Kb = RTb2·M/(1000ΔHV) = RTbM/(1000ΔSV) (∵ ΔSV = ΔHV/Tb)
∴ ΔSV = RTbM/(1000Kb) = (2 × 373 × 18)/(1000 × 0.51) = 26.33 cal K-1 mol-1

Teacher's Note: Rewrite Kb using ΔS = ΔH/Tb so that only R, Tb, M and Kb remain.

Exam Note: Entropy units: cal per kelvin per mole.

Question 68. Match the following if the molar masses of X, Y and Z are same. [IIT 2003]
b.pt.Kb
X1000.68
Y270.53
Z2530.98

Solution. Kb = RTb2·M/(1000ΔHV) = RTbM/(1000ΔSV), where ΔSV is the change in entropy during vaporisation at Tb.
Since during vaporisation entropy increases because randomness increases, ΔSV may be taken as almost constant as for liquid ⇌ vapour even if the extent of disorderness varies from liquid to liquid since, entropy in vapour state is abnormally higher. Thus, SV − SL = ΔSV is almost constant. If M and R are constant, Kb ∝ Tb.
Thus, the values reported in the table are in accordance with X, Y and Z: Kb increases with boiling point (Y: 27 → 0.53, X: 100 → 0.68, Z: 253 → 0.98).

Teacher's Note: Trouton-type argument: ΔSvap is roughly constant, so Kb rises with boiling point for equal molar mass.

Exam Note: Higher boiling point means larger Kb here.

Question 69. Calculate the amount of ice that will separate out on cooling a solution containing 50 g of ethylene glycol in 200 g water to −9.3°C. (Kf for water = 1.86 K mol-1 kg) (Roorkee 1995)

Solution. Given ΔT = 9.3, w = 50 g, Kf for H2O = 1.86 K mol-1 kg, mglycol = 62
ΔT = (1000 × Kf × w)/(m × W): 9.3 = (1000 × 1.86 × 50)/(62 × W) ∴ Wwater = 161.29 g
Thus, mass of ice separated = 200 − 161.29 = 38.71 g

Teacher's Note: At −9.3°C only 161.29 g water stays liquid for 50 g glycol; the rest freezes.

Exam Note: Ice = initial water minus water left liquid.

Question 70. 1000 g of 1 m sucrose solution in water is cooled to −3.534°C. What mass of ice would be separated out at this temperature? K′f H2O = 1.86 K mol-1 kg.

Solution. Solution starts freezing at −1.86°C (ΔT = K′f × molality = 1.86 × 1 = 1.86). On cooling up to −3.534°C, freezing continues. Let molality of solution left at −3.534°C be m′: ΔT = K′f × m′, m′ = 3.534/1.86 = 1.9 m
Initially 1000 g solvent contains 342 g sucrose, or 1342 g solution contains 342 g sucrose
∴ 1000 g solution contains (342 × 1000)/1342 = 254.84 g sucrose
∴ Mass of water = 1000 − 254.84 = 745.16 g
Sucrose remains same in solution before and after freezing. Now 1.9 × 342 g sucrose is in 1000 g water (∵ m′ = 1.9), so 254.84 g sucrose should be in (1000 × 254.84)/(1.9 × 342) = 392.18 g H2O
Thus, mass of ice separated out = 745.16 − 392.18 = 352.98 g
Alternate solution: ΔTf = (1000 K′f × w)/(W × m) = K′f × molality = 1.86 × 1 = 1.86 ...(2). Using w/W = (1.86 × 342)/(1.86 × 1000) = 0.342 ...(3) and w + W = 1000 ...(4) gives w = 254.84 g, W = 745.16 g. At −3.534°C: 3.534 = (1.86 × 1000 × 254.84)/(342 × W1), so W1 = 392.18 g (new mass of water); ice separated = 745.16 − 392.18 = 352.98 g

Teacher's Note: Solute mass is fixed; find water left liquid at the lower temperature, the remainder is ice.

Exam Note: Solution mass 1000 g includes the sucrose.

Question 71. 100 g of sucrose solution in water is cooled to −0.5°C. What mass of ice would be separated out at this temperature, if solution started to freeze at −0.38°C. K′f for H2O = 1.86 K mol-1 kg.

Solution. Corrected: let 100 g solution contain w g solute in W g solvent: w + W = 100 ...(1)
ΔTf = (1000 × K′f × w)/(W × m): 0.38 = (1000 × 1.86 × w)/(W × 342) ∴ w/W = 0.0699 (about 0.07) ...(2)
Solving (1) and (2): w = 6.53 g, W = 93.47 g
At −0.5°C, some water separates as ice and solute (6.53 g) stays in solution: 0.5 = (1000 × 1.86 × 6.53)/(W′ × 342) ∴ W′ = 71.03 g
Mass of ice separated out = 93.47 − 71.03 = 22.4 g
(The book takes w = 6.6 g, W = 93.40 g, obtaining 71.78 g and 21.62 g; the figure w = 6.6 g is a rounding slip, since 0.07W gives w = 6.54 g.)

Teacher's Note: The first freezing point gives solution composition; at the lower temperature the same solute sits in less water.

Exam Note: Solute mass stays constant while ice forms.

Question 72. Calculate the freezing point of an aqueous solution of non-electrolyte having an osmotic pressure 2.0 atm at 300 K. K′f = 1.86 K mol-1 kg and S = 0.0821 litre atm K-1 mol-1. Assume molarity and molality same. (Roorkee 1993)

Solution. πV = nST, so n/V = π/(ST) = 2/(0.0821 × 300) ∴ Molarity (n/V) = 0.0812 mol litre-1
Since ΔT = K′f × molality and molarity = molality = 0.0812: ΔT = 1.86 × 0.0812 = 0.151
∴ Freezing point = T0 − ΔT = 0 − 0.151 = −0.151°C

Teacher's Note: π gives molarity, which is taken equal to molality for the dilute solution, then ΔTf = Kfm.

Exam Note: Treat molarity as molality as instructed.

Question 73. An aqueous solution of urea has freezing point of −0.52°C. Calculate the osmotic pressure of solution at 27°C. Assume molarity and molality be same. K′f for H2O is 1.86 K mol-1 kg.

Solution. ΔT = (1000 × K′f × w)/(m × W) = K′f × molality: 0.52 = 1.86 × molality
∴ Molality = 0.52/1.86 = molarity (n/V) (given)
Now πV = nST ∴ π = (n/V)·ST = (0.52/1.86) × 0.0821 × 300 = 6.886 atm

Teacher's Note: Freezing depression gives molality, assumed equal to molarity, then π = CST.

Exam Note: Use 300 K for 27°C.

Question 74. The osmotic pressure of an aqueous solution of sucrose is 2.47 atm at 303 K and the molar volume of the water present is 18.10 cm3. Calculate the elevation in boiling point of the solution. Given ΔHVap. = 540 cal/g. Assume volume of solvent equal to volume of solution.

Solution. π = CST: 2.47 = C × 0.0821 × 303 ∴ C = 9.93 × 10-2 M
Thus, 1 litre solution of sucrose contains 9.93 × 10-2 mole of sucrose (or 9.93 × 10-2 × 342 g of sucrose).
Volume of solution = volume of solvent = 1000 mL, so moles of water = 1000/18.10 and mass of water = (1000/18.10) × 18 = 994.475 g
Molality of solution = (9.93 × 10-2)/(994.475 × 10-3) = 9.985 × 10-2 M
ΔTb = Kb × molality = (RTb2/(1000 l)) × molality = (2 × 373 × 373)/(1000 × 540) × 9.985 × 10-2 = 5.145 × 10-2 K

Teacher's Note: Osmotic pressure gives molarity; molar volume of water gives solvent mass, so molality and then ΔTb = Kbm.

Exam Note: Kb = RTb2/(1000 l) uses latent heat per gram.

Question 75. The molar mass of an organic compound is 58 g/mol. 24 g of this is dissolved in 600 g of water, calculate its boiling point when vapour pressure of water becomes 760 mm at 99.725°C. Kb of H2O is 0.513 K kg mol-1.

Solution. b.pt. of H2O = 99.725°C (vapour pressure of pure water = 760 mm there). Given worganic compound = 24 g, WH2O = 600 g, morganic compound = 58
ΔTb = (1000 × Kb × w)/(W × m) = (1000 × 0.513 × 24)/(600 × 58) = 0.354
∴ b.pt. of solution = 99.725 + 0.354 = 100.079°C

Teacher's Note: Boiling point of the solvent here is 99.725°C (where its V.P. is 760 mm); add ΔTb to it.

Exam Note: Add elevation to 99.725°C, not 100°C.

Question 76. A solution of a non-volatile solute in water freezes at −0.30°C. The vapour pressure of pure water at 298 K is 23.51 mm Hg and Kf for water is 1.86 degree/molal. Calculate the vapour pressure of this solution at 298 K. (IIT 1998)

Solution. ΔT = Kf × molality. From Raoult's law (P° − Ps)/Ps = (w × M)/(m × W) = (w × 1000 × M)/(m × W × 1000) = molality × M/1000
(P° − Ps)/Ps = (ΔT/Kf) × (M/1000)
Given P° = 23.51 mm Hg, ΔT = 0.3, Kf = 1.86, M = 18
(23.51 − Ps)/Ps = (0.3/1.86) × (18/1000) ∴ Ps = 23.44 mm Hg

Teacher's Note: Freezing depression gives molality, which feeds the dilute-solution relative lowering formula.

Exam Note: Molality times M/1000 equals relative lowering.

Question 77. A decimolar solution of potassium ferrocyanide is 50% dissociated at 300 K. Calculate osmotic pressure of the solution. Given S = 8.314 JK-1 mol-1. (Roorkee 1991)

Solution. Given molarity = n/V = 0.1 mol litre-1 = (0.1/10-3) mol m-3 = 102 mol m-3
πN (normal) = (n/V)ST = 102 × 8.314 × 300 Nm-2
For K4Fe(CN)6 ⇌ 4K+ + Fe(CN)64−: mole before 1, 0, 0; after 1 − α, 4α, α (α is degree of dissociation)
Given α = 0.5; πexp/πN = 1 + 4α
∴ πexp = 102 × 8.314 × 300 × (1 + 4 × 0.5) = 102 × 8.314 × 300 × 3 = 7.483 × 105 Nm-2

Teacher's Note: Each formula unit gives 5 ions at full dissociation, so i = 1 + 4α = 3.

Exam Note: Use i = 1 + (n − 1)α with n = 5.

Question 78. A 1% (mass/vol.) KCl solution is ionised to the extent of 82%. What would be its osmotic pressure at 18°C?

Solution. Given w = 1 g, m = 74.5, V = 100/1000 litre, T = 18 + 273 = 291 K
∵ πN = (n/V)ST = (w/(m·V))ST = (1 × 1000)/(74.5 × 100) × 0.0821 × 291 = 3.21 atm
For KCl ⇌ K+ + Cl−: before dissociation 1, 0, 0; after (1 − α), α, α
∴ πexp/πN = 1 + α ∴ πexp = 3.21(1 + 0.82) = 5.842 atm

Teacher's Note: Normal osmotic pressure from w/(mV)ST, then multiply by i = 1 + α for a binary electrolyte.

Exam Note: i = 1 + α for KCl.

Question 79. Calculate the osmotic pressure of 0.1N Na3PO4 solution at 300 K.

Solution. Given NNa3PO4 = 0.1, so Molarity of Na3PO4 = 0.1/3 M (∵ M = N/valency)
Thus, using πV = nST or π = (n/V)ST = (0.1/3) × 0.0821 × 300 = 0.821 atm (book answer, calculated without allowing for ionisation of the salt).
If Na3PO4 is taken as completely ionised into 4 ions (i = 4), the osmotic pressure would be 4 × 0.821 = 3.28 atm.

Teacher's Note: Convert normality to molarity by dividing by valency 3, then apply π = CST.

Exam Note: Check whether ionisation is to be included.

Question 80. Arrange the osmotic pressures of given solution in increasing order assuming complete ionisation of each salt.
(a) 0.1 N glucose   (b) 0.1 N KNO3   (c) 0.1 N K2SO4   (d) 0.1 N K3PO4

Solution. ∵ Molarity = Normality × Valence factor
Mglucose = 0.1/1 = 0.1; MKNO3 = 0.1/1 = 0.1; MK2SO4 = 0.1/2 = 0.05; MK3PO4 = 0.1/3 = 0.033
Also π ∝ Molarity × (1 − α + xα + yα):
πglucose ∝ 0.1 × 1 = 0.1; πKNO3 ∝ 0.1 × 2 = 0.2; πK2SO4 ∝ 0.05 × 3 = 0.15; πK3PO4 ∝ 0.033 × 4 = 0.132
∴ π order is: πKNO3 > πK2SO4 > πK3PO4 > πglucose, i.e. increasing order: (a) < (d) < (c) < (b)

Teacher's Note: Osmotic pressure scales with molarity times number of ions; normality must first be converted to molarity.

Exam Note: Rank by i × molarity, not by normality.

Question 81. A 0.001 molal solution of a complex represented as Pt(NH3)4Cl4 in water had a freezing point depression of 0.0054°C. Given Kf for H2O = 1.86 K molality-1. Assuming 100% ionisation of the complex, write the ionisation nature and formula of complex.

Solution. Let n atoms of Cl be acting as ligand. Then formula of complex and its ionisation is: [Pt(NH3)4Cln]Cl(4−n) → [Pt(NH3)4Cln]+(4−n) + (4 − n)Cl−
Thus, particles after dissociation = 4 − n + 1 = 5 − n and therefore, van't Hoff factor (i) = 5 − n
Now ΔTf = K′f × molality × van't Hoff factor: 0.0054 = 1.86 × 0.001 × (5 − n) ∴ n = 2.1 ≈ 2 (integer value)
Thus, complex and its ionisation is: [Pt(NH3)4Cl2]Cl2 → [Pt(NH3)4Cl2]2+ + 2Cl−

Teacher's Note: Observed i = 0.0054/(1.86 × 0.001) = 2.9, about 3 ions, so two chlorides are free.

Exam Note: i must be a whole number of ions.

Question 82. Calculate the osmotic pressure of 20% (mass/vol.) anhydrous CaCl2 solution at 0°C assuming 100% ionisation.

Solution. CaCl2 → Ca2+ + 2Cl−: before dissociation 1, 0, 0; after (1 − α), α, 2α
Given w = 20 g, V = 100 mL, T = 273 K; formula mass of CaCl2 = 111 g mol-1
πN = (w/(m·V)) × S × T = (20 × 1000 × 0.0821 × 273)/(111 × 100) = 40.38 atm
Now πexp/πN = 1 + 2α = 1 + 2 = 3 (∵ α = 1)
∴ πexp = 40.38 × 3 = 121.14 atm

Teacher's Note: Complete ionisation of CaCl2 gives three ions, so i = 3.

Exam Note: i = 3 for full ionisation of CaCl2.

Question 83. A solution of KCl containing 7.45 g of it per litre solution has osmotic pressure 4.68 atm at 300 K. Calculate van't Hoff factor, degree of dissociation and osmotic coefficient (g).

Solution. ∵ πN = (w/(m × V)) × ST = (7.45/(74.5 × 1)) × 0.0821 × 300 = 2.463 atm
For KCl ⇌ K+ + Cl−: before 1, 0, 0; after (1 − α), α, α
∴ i = πexp/πN = 4.68/2.463 = 1 + α ∴ i = 1.90
∴ α = 0.90 or 90%
Also osmotic coefficient g = i/n = 1.90/2 = 0.95

Teacher's Note: Compare observed π with normal π for i; α = i − 1 for KCl; g = i/n.

Exam Note: Osmotic coefficient g = i/n with n = 2.

Question 84. A certain mass of a substance when dissolved in 100 g C6H6 lowers the freezing point by 1.28°C. The same mass of solute dissolved in 100 g water lowers the freezing point by 1.40°C. If the substance has normal molar mass in benzene and is completely dissociated in water, into how many ions does it dissociate in water? K′f for H2O and C6H6 are 1.86 and 5.12 K kg mol-1 respectively.

Solution. ΔT = (1000 × K′f × w)/(W × m)
In C6H6: 1.28 = (1000 × 5.12 × w)/(mN × 100) ...(1)
In H2O: 1.40 = (1000 × 1.86 × w)/(mexp × 100) ...(2)
(Since, given that solute behaves as normal in C6H6 and dissociates in water.) By (1) and (2): mN/mexp = (1.40/1.28) × (5.12/1.86) = 3.01, so i = 3.01 ≈ 3.0
Since solute is 100% ionised, i.e. α = 1, let solute be AxBy ⇌ xA+ + yB−: i = 1 − α + xα + yα; i = 3 and α = 1, so x + y = 3
No. of ions given = 3

Teacher's Note: Benzene gives normal molar mass; the ratio of masses (equal i) from water gives van't Hoff factor 3.

Exam Note: i = 3 means three ions per formula unit.

Question 85. X g of a non-electrolyte compound (molar mass = 200) are dissolved in 1.0 litre of 0.05 M NaCl aqueous solution. The osmotic pressure of this solution is found to be 4.92 atm at 27°C. Calculate the value of X. Assume complete dissociation of NaCl and ideal behaviour of this solution. (R = 0.082 litre atm mol-1 K-1) (Roorkee 1998)

Solution. Given π = 4.92 atm; T = 27 + 273 = 300 K; V = 1 litre; n1 = moles of non-electrolyte = X/200; n2 = moles of NaCl = 0.05
Using πV = nST for a solution containing non-electrolyte and NaCl: πV = [n1 + n2(1 + α)]ST, where α = 1 given for NaCl
4.92 × 1 = [X/200 + 0.05 × 2] × 0.082 × 300 ∴ X = 20 g

Teacher's Note: Total particle concentration = X/200 + 2 × 0.05 (NaCl gives two ions); equate to π/(RT) = 0.2.

Exam Note: NaCl contributes twice its moles.

Question 86. Calculate osmotic pressure of a decinormal solution of BaCl2 at 27°C showing 80% degree of ionisation.

Solution. Given Normality = 1/10 for BaCl2, so Molarity = 1/20 for BaCl2 (∵ M = N/Valency)
∵ πN = (n/V) × ST = (1/20) × 0.0821 × 300 = 1.2315 atm
BaCl2 ⇌ Ba2+ + 2Cl−: before 1, 0, 0; after (1 − α), α, 2α. Total mole at equilibrium = 1 + 2α and α = 80% or 0.8
πexp/πN = 1 + 2α ∴ πexp = 1.2315 × (1 + 2 × 0.8) = 1.2315 × 2.6 = 3.20 atm

Teacher's Note: Decinormal BaCl2 is 0.05 M; then i = 1 + 2α = 2.6.

Exam Note: Normality to molarity: divide by 2.

Question 87. A 1.2% solution (mass/volume) of NaCl is isotonic with 7.2% solution (mass/volume) of glucose. Calculate degree of ionisation and van't Hoff factor of NaCl.

Solution. ∵ % mass/volume = (mass of solute/volume of solution) × 100; mass of glucose = 7.2 g, volume of solution = 100 mL
For glucose: πexp or πN = (w/(m × V)) × ST (V in litre) = (7.2 × 1000 × 0.0821 × T)/(180 × 100)
For NaCl: πN = (w/(m × V)) × ST = (1.2 × 1000 × 0.0821 × T)/(58.5 × 100)
Since two solutions are isotonic, πexp(NaCl) = πN(glucose), so for NaCl πexp/πN = 1 + α: [(7.2 × 1000 × 0.0821 × T)/(180 × 100)] × [(58.5 × 100)/(1.2 × 1000 × 0.0821 × T)] = 1 + α = i
∴ α = 0.95 and i = 1.95

Teacher's Note: Isotonic: observed π of NaCl equals π of glucose, so i = πglucose/πNaCl,normal.

Exam Note: Equal osmotic pressure; ratio gives i.

Question 88. The vapour pressure of a solution containing 2 g of an electrolyte BA in 100 g water, which dissociates in one B+ and one A− ion in water, is 751 mm at 100°C. Calculate degree of ionisation of BA if its molar mass is 56.

Solution. (P° − Ps)/Ps = (w × M)/(m × W): (760 − 751)/751 = (2 × 18)/(m × 100) ∴ mexp = 30.04
For BA ⇌ B+ + A−: before 1, 0, 0; after (1 − α), α, α
Now mN/mexp = 1 + α: 56/30.04 = 1 + α ∴ α = 0.8641 or 86.41%

Teacher's Note: Experimental molar mass from vapour pressure lowering; normal/observed mass ratio equals i = 1 + α.

Exam Note: Water at 100°C has P° = 760 mm.

Question 89. When 11.7 g of NaCl are dissolved in 200 g of water the depression in freezing point is double the depression caused by 342 g of cane-sugar in 1000 g of water. From this information what can you infer about the nature of solute particles of NaCl in solution?

Solution. For NaCl: 2ΔT = (1000 × K′f × 11.7)/(200 × m) (let depression in f. pt. for sugar = ΔT)
For sugar: ΔT = (1000 × K′f × 342)/(1000 × 342) (∵ depression for NaCl = 2 × ΔT)
∴ mNaCl = 29.25 (experimental)
Now mNormal for NaCl = 58.5 g mol-1. For NaCl ⇌ Na+ + Cl−: mNormal/mexp = 1 + α
58.5/29.25 = 1 + α ∴ α = 1
That is NaCl is 100% ionised in solution.

Teacher's Note: Sugar depression equals Kf (1 molal); NaCl gives twice, so i = 2 and complete ionisation.

Exam Note: Doubled depression means two particles per formula.

Question 90. A storage battery contains a solution of H2SO4 38% by mass. At this concentration, van't Hoff factor is 2.50. At what temperature will the battery contents freeze? (K′f = 1.86° mol-1 kg)

Solution. Given wH2SO4 = 38 g, WH2O = 100 − 38 = 62 g
ΔT = (1000 × K′f × w)/(mW) = (1000 × 1.86 × 38)/(98 × 62) ∴ ΔTNormal = 11.633
Now ΔTexp/ΔTN = i = 2.50 ∴ ΔTexp = 11.633 × 2.50 = 29.08
∴ f. pt. = 273 − 29.08 = 243.92 K

Teacher's Note: Calculate normal depression for 38 g acid in 62 g water, then multiply by i = 2.5.

Exam Note: Water mass is 62 g, not 100 g.

Question 91. The degree of dissociation of Ca(NO3)2 in a dilute aqueous solution containing 7 g of salt per 100 g of water at 100°C is 70%. Calculate the vapour pressure of solution. (IIT 1991)

Solution. Ca(NO3)2 ⇌ Ca2+ + 2NO3−: before 1, 0, 0; after (1 − α), α, 2α
Total mole at equilibrium = (1 + 2α) = (1 + 2 × 0.7) = 2.4
For Ca(NO3)2: mN/mexp = 1 + 2α ∴ mexp = 164/(1 + 2 × 0.7) = 164/2.4 = 68.33
Also at 100°C, P°H2O = 760 mm, w = 7 g, W = 100 g
(P° − Ps)/Ps = (7 × 18)/(68.33 × 100) = 0.0184, or P°/Ps − 1 = 0.0184
∴ Ps = 760/1.0184 = 746.2 mm (the book prints 746.27 mm)

Teacher's Note: Experimental molar mass = 164/i with i = 2.4; then relative lowering gives the solution vapour pressure.

Exam Note: i = 1 + 2α for a salt giving three ions.

Question 92. 1 g of monobasic acid in 100 g of water lowers the freezing point by 0.168°C. If 0.2 g of same acid requires 15.1 mL of N/10 alkali for complete neutralization, calculate degree of dissociation of acid. K′f for H2O is 1.86 K kg mol-1.

Solution. ∵ ΔT = (1000 × K′f × w)/(m · W) and ΔT = 0.168, w = 1 g, W = 100 g, K′f = 1.86 ∴ macid = 110.71 (this is experimental molar mass)
Now Meq. of acid = Meq. of alkali: (0.2/E) × 1000 = 15.1 × (1/10) ∴ Eq. mass of acid = (0.2 × 1000 × 10)/15.1 = 132.45
∴ Normal molar mass = 132.45 × 1 (since monobasic)
HA ⇌ H+ + A−: before 1, 0, 0; after (1 − α), α, α
mN/mexp = 1 + α: 132.45/110.71 = 1 + α ∴ α = 0.196 or 19.6%

Teacher's Note: Titration gives the true molar mass of a monobasic acid; freezing depression gives the lower observed mass.

Exam Note: Equivalent mass equals molar mass for monobasic acid.

Question 93. 1 g of a mixture containing NaCl and CaCl2 is dissolved in water. Sodium oxalate on addition to this solution completely converts CaCl2 to CaC2O4. The CaC2O4 is filtered and dissolved in dil. H2SO4. The clear solution requires 22 mL of 0.1 M KMnO4. Calculate freezing point of an aqueous solution prepared by dissolving 5 g mixture containing CaCl2 and NaCl in 100 g water. Kf of water is 1.86 K kg-1 mol. Assume complete dissociation of CaCl2 and NaCl.

Solution. Let NaCl and CaCl2 be a, b g respectively in 1 g mixture: a + b = 1
Meq. of CaCl2 = Meq. of CaC2O4 = Meq. of KMnO4 = 22 × 0.1 × 5 = 11
∴ mass of CaCl2 = 11 × (111/2) × (1/1000) = 0.61 g; mass of NaCl = 0.39 g
∴ mass of CaCl2 in 5 g mixture = 0.61 × 5 = 3.05 g; mass of NaCl in 5 g mixture = 0.39 × 5 = 1.95 g
ΔT = (1000Kf/W)[(1 + α)(w/m) for NaCl + (1 + 2α)(w/m) for CaCl2] = (1000 × 1.86/100)[(1 + 1) × 1.95/58.5 + (1 + 2) × 3.05/111] = (1000 × 1.86/100) × 0.149 = 2.77 K
Freezing point = 273 − 2.77 = 270.23 K

Teacher's Note: Permanganate titration gives CaCl2 mass; then add effects with i = 2 for NaCl, 3 for CaCl2.

Exam Note: Equivalent mass of CaCl2 in this titration is 111/2.

Question 94. What will be the osmotic pressure of 0.1 M monobasic acid if its pH is 2 at 25°C?

Solution. HA ⇌ H+ + A−; [H+] = Cα = 10-2 ∴ α = 10-2/0.1 = 10-1 = 0.1
∴ Total particles in solution = 1 + α = 1 + 0.1 = 1.1
Now π = CST(1 + α) = 0.1 × 0.0821 × 298 × 1.1 = 2.69 atm

Teacher's Note: pH gives [H+] and hence α = [H+]/C; then π = CST(1 + α).

Exam Note: i = 1 + α for monobasic acid.

Question 95. A complex is represented as CoCl3·xNH3. Its 0.1 molal solution in water shows ΔTf = 0.558°. Kf for H2O is 1.86 K molality-1. Assuming 100% ionisation of complex and coordination number of Co as six, calculate formula of complex.

Solution. CoCl3·xNH3 → CoCl3−n·xNH3 + nCl− (1 mole before; 0 and α after). Assume nCl− are attached with Co through primary valencies which undergo ionisation. All the NH3 molecules are attached with Co through secondary valencies.
ΔTf = Kf × molality × (1 − α + α + nα): 0.558 = 1.86 × 0.1 × (1 + n) (∵ α = 1) ∴ n = 2
Thus, complex is [CoCl·xNH3]Cl2. Since, coordination number of Co is six, thus complex is [Co(NH3)5Cl]Cl2.

Teacher's Note: i = 3 gives two free chloride ions; coordination number six then fixes five NH3 and one bound Cl.

Exam Note: Count ions: complex cation plus two Cl−.

Question 96. What is the ratio by mass of NaF and NaI which when dissolved in water produces the same osmotic effects as 0.1 molar solution of urea at same temperature? The mass of residue obtained on evaporation of the salt solution is 0.48 gram per 100 mL of solution evaporated. Assume complete dissociation of the salts.

Solution. Let NaF and NaI be a and b g respectively: a + b = 0.48 ...(1)
Thus, for NaF + NaI solution in water: π × (100/1000) = (a/42 + b/150) × 2 × 0.0821 × T ...(2)
For urea in water: π × 1 = 0.1 × 0.0821 × T ...(3)
By (2) and (3): (a/42 + b/150) × 2/0.1 = 100/1000, so 150a + 42b = 31.5 ...(4)
By (1) and (4): a = 0.105, b = 0.375
Thus, a/b = 0.105/0.375 = 0.28 (NaF : NaI = 0.28 : 1 by mass)

Teacher's Note: Each salt gives two ions, so total ion concentration must equal 0.1 M; combine with the mass equation.

Exam Note: Complete dissociation: each salt counts twice.

Question 97. A 0.025M solution of monobasic acid had a freezing point of −0.06°C. Calculate Ka for the acid. Kf for H2O = 1.86° molality-1. Assume molality equal to molarity.

Solution. For monobasic acid HA ⇌ H+ + A−: 1, 0, 0 → (1 − α), α, α
From Ostwald dilution law, Ka = Cα2/(1 − α) ...(1)
Now ΔTf(calc.) = K′f × molality = 1.86 × 0.025 = 0.0465
i = (observed ΔT)/(calculated ΔT) = 1 + α = 0.06/0.0465 ∴ α = 0.29 and C = 0.025 M
By (1): Ka = 0.025 × (0.29)2/(1 − 0.29) = 2.96 × 10-3

Teacher's Note: Observed/ideal depression gives i = 1 + α, then Ostwald dilution law gives Ka.

Exam Note: Use molality = molarity for C in Ka.

Question 98. 0.01 M aqueous solution of weak acids HA and HB shows osmotic pressures equal to 0.30 atm and 0.35 atm respectively at 25°C. Calculate the degree of their dissociation.

Solution. Corrected (temperature): π1 = C1S1T1(1 + α1) (for HA); π2 = C2S2T2(1 + α2) (for HB), with T = 25°C = 298 K
1 + α1 = 0.30/(0.01 × 0.0821 × 298) = 1.226 ∴ α1 = 0.226
1 + α2 = 0.35/(0.01 × 0.0821 × 298) = 1.430 ∴ α2 = 0.430
α1/α2 = 0.226/0.430 = 0.52
(The book uses T = 300 K and obtains α1 = 0.218, α2 = 0.421, ratio 0.52.)

Teacher's Note: i = π/(CST) = 1 + α for each monobasic weak acid; HB is the stronger acid.

Exam Note: Use 298 K for 25°C.

Question 99. Calculate the boiling point of a solution containing 0.61 g of benzoic acid in 50 g of carbon disulphide assuming 84% dimerization of the acid. The boiling point and Kb of CS2 are 46.2°C and 2.3 K kg mol-1. (Roorkee 1997)

Solution. ΔTN = (1000 × 2.3 × 0.61)/(122 × 50) (molar mass of C6H5COOH = 122) = 0.23
ΔTexp = ΔTN(1 − α + α/n) = 0.23 × (1 − 0.84 + 0.84/2) = 0.23 × (1 − 0.84/2) = 0.1334
b.pt. = 46.2 + 0.1334 = 46.3334°C

Teacher's Note: Dimerisation lowers particle count, so observed elevation = normal × (1 − α/2).

Exam Note: Association reduces, not raises, ΔTb.

Question 100. 1.22 g of benzoic acid is dissolved in 100 g each of acetone and benzene separately. Boiling point of mixture with acetone increase by 0.17°C and boiling point of mixture with benzene increases by 0.13°C. Kb for acetone and benzene are 1.7 and 2.6 K kg mol-1 respectively. Find the molar mass of benzoic acid in acetone and benzene. Justify your answer with structure. (IIT 2004)

Solution. m = (1000 Kb·w)/(W·ΔT)
In acetone: m = (1000 × 1.7 × 1.22)/(0.17 × 100) = 122 g mol-1
In benzene: m = (1000 × 2.6 × 1.22)/(0.13 × 100) = 244 g mol-1
Molar mass of C6H5COOH is 122 and thus it is evident that benzoic acid remains as normal molecular species in acetone but shows dimerisation in C6H6, i.e. in C6H6 it exists as (C6H5COOH)2. The structure of dimer (figure not redrawn): two benzoic acid molecules joined as a cyclic dimer, the C=O oxygen of each molecule hydrogen-bonded (O···H–O) to the O–H hydrogen of the other carboxyl group, with a C6H5 group on each carboxyl carbon.

Teacher's Note: Acetone H-bonds with the acid, keeping it monomeric; non-polar benzene lets acid dimerise via two H-bonds.

Exam Note: State why the molar mass doubles in benzene.

Question 101. To 500 cm3 of water, 3.0 × 10-3 kg of acetic acid is added. If 23% of acetic acid is dissociated, what will be the depression in freezing point? Kf and density of water are 1.86 K kg mol-1 and 0.997 g cm-3 respectively. (IIT 2000)

Solution. ΔT = Kf × molality × (1 + α)
For acetic acid CH3COOH ⇌ CH3COO− + H+: (1 − α), α, α. Given α = 0.23
Molality = moles of acetic acid/mass of water in kg = (3 × 10-3 × 103/60)/(500 × 0.997/103) = 0.10
ΔT = 1.86 × 0.10 × 1.23 = 0.229 K

Teacher's Note: Dissociation increases particles by (1 + α); mass of water comes from 500 cm3 × density.

Exam Note: Use water mass 498.5 g for molality.

Question 102. The freezing point of a solution containing 0.2 g of acetic acid in 20.0 g benzene is lowered by 0.45°C. Calculate the degree of association of acetic acid in benzene. Assume acetic acid dimerizes in benzene. Kf for benzene = 5.12 K kg mol-1. (Roorkee 1994)

Solution. Given w = 0.2 g, W = 20 g, ΔT = 0.45°C
ΔT = (1000 × K′f × w)/(m × W) or 0.45 = (1000 × 5.12 × 0.2)/(20 × m) ∴ m (observed) = 113.78 g mol-1
For 2CH3COOH ⇌ (CH3COOH)2: before association 1, 0; after (1 − α), α/2
mnormal/mobserved = 1 − α + α/2: 60/113.78 = 1 − α/2 ∴ α = 0.945 or 94.5%

Teacher's Note: Observed molar mass is larger than 60, signalling dimerisation; i = 1 − α/2.

Exam Note: Association gives i less than 1.

Question 103. 2 g of benzoic acid dissolved in 25 g of C6H6 shows a depression in freezing point equal to 1.62 K. Molal depression constant of C6H6 is 4.9 K mol-1 kg. What is the percentage association of acid if it forms double molecule in solution? (Roorkee 1990)

Solution. Given w = 2 g, W = 25 g, ΔT = 1.62, K′f = 4.9
ΔT = (1000 × K′f × w)/(m × W): 1.62 = (1000 × 4.9 × 2)/(25 × m) ∴ mexp = 241.98 g mol-1
nC6H5COOH ⇌ (C6H5COOH)n: before 1, 0; after (1 − α), α/n
Total number of mole at equilibrium = 1 − α + α/n; mN/mexp = 1 − α + α/n. For dimer formation n = 2
122.0/241.98 = 1 − α + α/2 or 1 − α/2 = 0.504 ∴ α = 0.992 or 99.2%

Teacher's Note: Observed molar mass near twice 122 signals nearly complete dimerisation.

Exam Note: Dimer: n = 2, i = 1 − α/2.

Question 104. 75.2 g C6H5OH (phenol) is dissolved in 1 kg of solvent of Kf = 14 K molality-1. If depression in freezing point is 7 K, then find the % dimerisation of phenol. [IIT 2006]

Solution. 2C6H5OH ⇌ (C6H5OH)2: before 1, 0; after (1 − α), α/2
∵ ΔTf = (1000Kf × w)/(m × W) × (1 − α + α/2): 7 = (1000 × 14 × 75.2)/(94 × 1000) × (1 − α/2) = 11.2(1 − α/2)
∴ α = 0.75 or 75%

Teacher's Note: Normal depression = 11.2 K versus observed 7 K gives i = 0.625 and α = 0.75.

Exam Note: Phenol dimerises through hydrogen bonding.

Question 105. The freezing point of 0.02 mole fraction of acetic acid in benzene is 277.4 K. Acetic acid exists partly as dimer. Calculate the equilibrium constant for dimerisation. Freezing point of benzene is 278.4 K and heat of fusion of benzene is 10.042 kJ mol-1. Assume molarity and molality same. (IIT 2006)

Solution. Corrected: for benzene K′f = RT2/(1000 lf(cal/g)) = (8.314 × (278.4)2)/(1000 × 10.042 × 103/78) = 5.0 K molality-1
ΔT = 278.4 − 277.4 = 1
For acetic acid in benzene: 2CH3COOH ⇌ (CH3COOH)2: before C, 0; after C(1 − α), Cα/2; so KC = (Cα/2)/(C2(1 − α)2) ...(1)
Also ΔT = K′f × molality × (1 − α/2) ...(2) (total particles at equilibrium = 1 − α + α/2 = 1 − α/2)
Mole fraction of acetic acid = 0.02 = n/(n + N), benzene 0.98 = N/(n + N), so n/N = 0.02/0.98; molality = (n × 1000)/(N × M) = (0.02 × 1000)/(0.98 × 78) = 0.262 m
From (2): 1 = 5 × 0.262 × (1 − α/2) ∴ 1 − α/2 = 0.763, α = 0.47
From (1), assuming molarity = molality: KC = 0.47/(2 × 0.262 × (1 − 0.47)2) = 3.2 mol-1 litre
(The book rounds to α = 0.48 and KC = 3.39; with unrounded values α = 0.473 and KC = 3.25.)

Teacher's Note: Freezing depression gives degree of association; then KC = [dimer]/[monomer]2 with molality as concentration.

Exam Note: KC for dimer: (Cα/2)/(C(1−α))2.

Question 106. A solution containing 28 g phosphorus in 315 g CS2 (b.pt. 46.3°C) boils at 47.98°C. K′b for CS2 is 2.34 K kg mol-1. Calculate molar mass of phosphorus and deduce its molecular formula. Assume its complete association.

Solution. ΔT = (1000 × K′b × w)/(m × W): 1.68 = (1000 × 2.34 × 28)/(m × 315) ∴ mexp = 123.80 g mol-1
mN/mexp = 1 − α + α/n; ∵ α = 1, mN/mexp = 1/n (mN of P = 31)
31/123.80 = 1/n ∴ n ≈ 4, i.e. P4 (molar mass 123.8 g mol-1)

Teacher's Note: Observed molar mass is four times atomic mass 31; complete association gives P4.

Exam Note: Atomic mass 31 per P atom.

Question 107. Calculate the molal lowering of vapour pressure for H2O at 100°C.

Solution. (P° − Ps)/P° = n/(n + N), so P° − Ps = P°[n/(n + N)]
Let 1 mole of solute be dissolved in 1000 g solvent water. Thus, n = 1 and N = 1000/18. Also P° = 760 mm for water at 100°C
∴ P° − Ps = [1/(1 + 1000/18)] × 760 = 13.44 mm (the book prints 13.43 mm)

Teacher's Note: Molal lowering means lowering when 1 mol solute is in 1000 g (55.56 mol) of water.

Exam Note: Use P° = 760 mm at 100°C.

Question 108. The freezing point of 0.08 molal NaHSO4 is −0.345°C. Calculate the percentage of HSO4− ions that transfers a proton to water. Assume 100% ionisation of NaHSO4 and Kf for H2O is 1.86 K molality-1.

Solution. NaHSO4 → Na+ + HSO4− (1, then 0, 1, 1)
HSO4− + H2O → H3O+ + SO42−: 1 − h, h, h
∴ Total particles after dissolution of NaHSO4 = 1 + 1 − h + h + h = 2 + h
ΔTf = Kf × molality × (i): 0.345 = 1.86 × 0.08 × (2 + h) ∴ 2 + h = 2.319 ∴ h = 0.319
i.e. 31.9% of HSO4− shows proton transfer to H2O.

Teacher's Note: Na+ and HSO4− give i = 2 at least; extra particles from HSO4− ionisation give i = 2 + h.

Exam Note: i = 2 + h for the partial second ionisation.

Question 109. The vapour pressure of two miscible liquids (A) and (B) are 300 and 500 mm of Hg respectively. In a flask 10 mole of (A) is mixed with 12 mole of (B). However, as soon as (B) is added, (A) starts polymerising into a completely insoluble solid. The polymerisation follows first-order kinetics. After 100 minute, 0.525 mole of a solute is dissolved which arrests the polymerisation completely. The final vapour pressure of the solution is 400 mm of Hg. Estimate the rate constant of the polymerisation reaction. Assume negligible volume change on mixing and polymerisation and ideal behaviour of the final solution. (IIT 2001)

Solution. A(l) + B(l) → (A)n (insoluble) + B(l)
PM = P°A·XA + P°B·XB = 300(a/(12 + a)) + 500(12/(12 + a)) ...(1), where a mole of A are left after polymerisation after 100 minute
Also rate constant K = (2.303/t) log(10/a) ...(2)
After 100 minute polymerisation is checked. After 100 minute solute is added and final vapour pressure is 400 (i.e. Ps = 400): (PM − 400)/400 = 0.525/(a + 12) ...(3)
Solving (1) and (3): a = 9.9
Using this value of a in (2): K = (2.303/100) log(10/9.9) = 1.0 × 10-4 min-1

Teacher's Note: Remaining A fixes vapour pressure; relative lowering by added solute gives a; first-order law gives k.

Exam Note: Rate constant: first-order, ln(initial/left)/t.

Question 110. The vapour pressure of a very dilute aqueous solution and pure water are 17 and 17.39 mm at 20°C. Calculate the osmotic pressure at 20°C and density of water vapours at 20°C.

Solution. (P° − Ps)/Ps = n/N = (n × M × 1000)/(W × 1000) = molality × M/1000
(17.39 − 17.0)/17.0 = (molality × 18)/1000 ∴ molality = (0.39 × 1000)/(17 × 18) = 1.275
For dilute solution molarity = molality ∴ π = CST = 1.275 × 0.0821 × 293 = 30.66 atm
Also for water vapours PV = nRT, P = (w/V)(RT/m): w/V = Pm/(RT) = (17.0 × 18)/(760 × 0.0821 × 293) = 1.673 × 10-2 g/litre = 1.673 × 10-5 g/mL (book value, taking 17.0 mm as the vapour pressure; using 17.39 mm for saturated vapour over pure water gives 1.71 × 10-2 g/litre)

Teacher's Note: Relative lowering gives molality, taken equal to molarity for π = CST; vapour density from PM/RT.

Exam Note: Use pressure in atm: mm divided by 760.

Question 111. A 10% (mass/mass) solution of cane-sugar undergoes partial conversion into glucose and fructose to show inversion of cane-sugar as: Sucrose + Water → Glucose + Fructose. If the solution at this state boils at 100.27°C at this state, calculate the average mass of the dissolved material. What fraction of the sugar has inverted? Given Kb for H2O is 0.512 K kg.

Solution. ΔTb = (1000 × w × Kb)/(m × W) × (1 + α)
∵ w = 10 g; W = 100 − 10 = 90 g: 0.27 = (1000 × 10 × 0.512)/(342 × 90) × (1 + α) ∴ α = 0.623
Also mN/mexp = 1 + α ∴ mexp = 342/1.623 = 210.7 g mol-1

Teacher's Note: Each sucrose inverted gives two particles, so i = 1 + α and average molar mass = 342/i.

Exam Note: Inversion doubles particles: i = 1 + α.

Question 112. The vapour pressure of a certain liquid is given by the equation: log10 P = 3.54595 + 313.7/T + 1.40655 log10 T, where P is vapour pressure in mm and T is temperature in K. Determine molar latent heat of vaporisation as a function of temperature and calculate its value at 80K.

Solution. (The book solves with the term 313.7/T taken as −313.7/T, which is the form that gives a positive latent heat; the plus sign in the printed equation appears to be a misprint.)
log10 P = 3.54595 − 313.7/T + 1.40655 log10 T
ln P = (3.54595 × 2.303) − (313.7 × 2.303)/T + 1.40655 ln T
∴ d ln P/dT = (313.7 × 2.303)/T2 + 1.40655/T [∵ d ln P/dT = ΔH/RT2]
∴ ΔH = [313.7 × 2.303 + 1.40655 T]R
At 80 K: ΔH = 1670 cal (with R = 2 cal K-1 mol-1)

Teacher's Note: Differentiate ln P with respect to T and use Clausius-Clapeyron: ΔH = RT2(d ln P/dT).

Exam Note: Convert log10 to ln with factor 2.303.

Question 113. Calculate the concentration of CO2 in a soft drink that is bottled with a partial pressure of CO2 of 4 atm over the liquid at 25°C. The Henry's law constant for CO2 in water at 25°C is 3.1 × 10-2 mol/litre-atm.

Solution. According to Henry's law, a/P = K
∴ a = 3.1 × 10-2 × 4 = 0.124 mol/litre

Teacher's Note: Henry's law: solubility is proportional to gas partial pressure.

Exam Note: Solubility = KH × pressure.

Question 114. If N2 gas is bubbled through water at 293 K, how many milli moles of N2 gas would dissolve in 1 litre of water? Assume that N2 exerts a partial pressure of 0.987 bar. Given that Henry's law constant for N2 at 293 K is 76.48 kbar.

Solution. Corrected (arithmetic): xN2 = PN2/KH = 0.987/76480 = 1.29 × 10-5
If n represents number of mole of N2 in 1 litre H2O or (1000/18) mole = 55.6 mole H2O, then xN2 = n/(n + 55.6) ≈ n/55.6 = 1.29 × 10-5
Thus n = 1.29 × 10-5 × 55.6 mol = 7.17 × 10-4 mol = 0.717 milli mol (the book prints 7.18 × 10-4 mol, 0.718 milli mol)

Teacher's Note: Henry's law in mole-fraction form; dilute so n/(n + 55.6) is about n/55.6.

Exam Note: 1 litre water = 55.6 mol.

Download P Bahadur Solutions for JEE Math PDF

Chapter-wise P Bahadur Solutions: P Bahadur Solutions Numerical Chemistry Chapter 9 Colligative Properties Solutions Part 1

Explore reliable mathematical solutions for P Bahadur Solutions Numerical Chemistry Chapter 9 Colligative Properties Solutions Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for JEE

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

In addition to these P Bahadur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.