P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 1

P Bahadur Solutions for JEE Chemistry: Chapter 20 Qualitative Estimations

Review structured textbook solutions for JEE Chemistry Chapter 20 Qualitative Estimations prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Chemistry Solutions: Chapter 20 Qualitative Estimations

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Qualitative Estimations - Numerical Problems

Numerical Problems

Question 1. A compound on heating with an excess of caustic soda solution liberates a gas (B), which gives white fumes on exposure to HCl. Heating is continued to expel the gas completely. The resultant alkaline solution again liberates the same gas (B), when heated with zinc powder. However, the compound (A), when heated alone, does not give nitrogen. Identify (A) and (B).

Solution. (i) (A) on heating with excess of NaOH gives gas (B) which forms white fumes with HCl and thus, (B) is NH3 and (A) is an ammonium salt.
(ii) The product formed in reaction between (A) and NaOH, on heating with Zn + NaOH gives NH3 and thus, it should be nitrate or nitrite. Ammonium nitrate or nitrite would give N2 on heating, but (A) does not give N2 on heating, thus it is nitrate.
Reactions:
(i) NH4NO3 + NaOH → NaNO3 + H2O + NH3↑   [(A) = NH4NO3, (B) = NH3]
NH3 + HCl → NH4Cl (white fumes)
(ii) NaNO3 + 8H → (Zn/NaOH) NaOH + 2H2O + NH3

Teacher's Note: White fumes with HCl mean NH3; Zn/NaOH reducing nitrate to NH3 fixes the anion as nitrate.

Exam Note: Name gas B and salt A with both tests.

Question 2. An aqueous solution of a salt (A) gives a white crystalline precipitate (B) with NaCl solution. The filtrate gives a black precipitate (C) when H2S is passed through it. Compound (B) dissolves in hot water and the solution gives yellow precipitate (D) on treatment with sodium iodide and cooling. The compound (A) does not give any gas with dilute HCl but liberates a reddish brown gas on heating. Identify the compounds (A) to (D) and give an equation for the liberation of the reddish brown gas.

Solution. (1) (A) gives white ppt. (B) with NaCl solution, soluble in hot water as well as filtrate of this with H2S gives black ppt. and thus, (A) has Pb2+ ion in it.
(2) (A) liberates reddish brown gas on heating and thus it should have NO3− ion in it, (A) is Pb(NO3)2.
Reactions:
Pb(NO3)2 + 2NaCl → PbCl2 + 2NaNO3   [(A); (B)]
PbCl2 + H2S → PbS + 2HCl   [(C) black]
Pb(NO3)2 →(Δ) PbO + 2NO2 + ½O2
PbCl2 + 2KI → PbI2 + 2KCl   [(D) yellow ppt.]

Teacher's Note: PbCl2 is the white solid that dissolves in hot water; black PbS and yellow PbI2 confirm Pb2+.

Exam Note: Give A to D and the NO2 equation.

Question 3. An unknown solid mixture contains one or two of the following: CaCO3, BaCl2, AgNO3, Na2SO4, ZnSO4 and NaOH. The mixture is completely soluble in water and the solution gives pink colour with phenolphthalein. When dilute hydrochloric acid is gradually added to the above solution, a precipitate is formed which dissolves with further addition of the acid. What is/are present in the solid? Give equations to explain the appearance of the precipitate and its dissociation.

Solution. (1) The mixture is soluble in water and gives pink colour with phenolphthalein, so it is alkaline: it must contain NaOH as one of the constituents.
(2) The aqueous solution of mixture gives white ppt. with dil. HCl which dissolves in excess of dil. HCl and thus, it must have Zn salt, i.e., ZnSO4.
(3) Thus, mixture is NaOH + ZnSO4.
Reactions:
(i) ZnSO4 + 4NaOH → Na2ZnO2 + Na2SO4 + 2H2O   (soluble)
(ii) Na2ZnO2 + 2HCl → 2NaCl + Zn(OH)2↓
Zn(OH)2 + 2HCl → ZnCl2 + 2H2O   (soluble)

Teacher's Note: Excess NaOH keeps Zn as soluble zincate; acid first precipitates amphoteric Zn(OH)2, then dissolves it.

Exam Note: Show zincate, Zn(OH)2 precipitate and its dissolution.

Question 4. A mixture of two salts was treated as follows:
(i) The mixture was heated with manganese dioxide and concentrated sulphuric acid, when yellowish green gas was liberated.
(ii) The mixture on heating with sodium hydroxide solution gave a gas which turned red litmus blue.
(iii) Its solution in water gave blue precipitate with potassium ferricyanide and red colouration with ammonium thiocyanate.
(iv) The mixture was boiled with potassium hydroxide and the liberated gas was bubbled through an alkaline solution of K2HgI4 to give a brown precipitate. Identify the two salts. Give ionic equations for reactions involved in the tests (i), (ii) and (iii).

Solution. (1) Step (i) of the problem indicates the presence of Cl− in mixture (a test for Cl−).
(2) Step (ii) indicates the presence of NH4+ in mixture (a test for NH4+).
(3) Step (iii) indicates the presence of Fe2+ ion in mixture.
(4) Thus, mixture has Fe2+, Cl− and NH4+ ions, i.e., it is a mixture of FeCl2 and NH4Cl.
Reactions:
(1) 2NH4Cl + MnO2 + 2H2SO4 →(Δ) MnSO4 + Cl2↑ + 2H2O + (NH4)2SO4
NH4Cl + NaOH →(Δ) NH3↑ + H2O + NaCl   (turns red litmus to blue)
(2) 3FeCl2 + 2K3Fe(CN)6 → Fe3[Fe(CN)6]2 + 6KCl   (blue colour)
Fe2+ →(oxidation in aqueous sol.) Fe3+
Fe3+ + 3SCN− → Fe(SCN)3   (blood-red colour)
Note: If the mixture already contains Fe3+ ion, it should give brown ppt. with K3Fe(CN)6. Thus, Fe3+ ions are believed to be formed by the oxidation of Fe2+ ions in solution.
(3) KOH + NH4Cl → NH3 + KCl + H2O
NH3 + 3NaOH + 2K2HgI4 → [O(Hg)2NH2]I (brown) + 4KI + 2H2O + 3NaI

Teacher's Note: Cl2 with MnO2/H2SO4, NH3 with alkali, blue ppt. with ferricyanide fix Cl−, NH4+, Fe2+.

Exam Note: Identify FeCl2 + NH4Cl; write ionic equations.

Question 5. A compound (A) is greenish crystalline salt, which gave the following results:
(i) Addition of BaCl2 solution to the solution of (A) results in the formation of a white ppt. (B), which is insoluble in dil. HCl.
(ii) On heating (A), water vapours and two oxides of sulphur, (C) and (D) are liberated leaving a red brown residue (E).
(iii) (E) dissolves in warm conc. HCl to give a yellow solution (F).
(iv) With H2S, the solution (F) yields a pale yellow ppt. (G), which when filtered leaves a greenish filtrate (H).
(v) Solution (F) on treatment with thiocyanate ions gives blood red coloured compound (I).
Identify the substances from (A) to (I).

Solution. (1) Compound (A) forms white insoluble ppt. with BaCl2. So it is a sulphate.
(2) (A) produces red colouration with thiocyanate, so it may be iron sulphate.
(3) Since it is greenish in colour, so it is crystalline FeSO4·7H2O.
Reactions:
(i) FeSO4 + BaCl2 → FeCl2 + BaSO4   [(A); (B) white ppt.]
(ii) FeSO4·7H2O →(Heat) FeSO4 + 7H2O
2FeSO4 →(Heat) Fe2O3 + SO2 + SO3   [(E) brown residue; (C); (D)]
(iii) Fe2O3 + 6HCl → 2FeCl3 + 3H2O   [(E); (F) yellow solution]
(iv) 2FeCl3 + H2S → 2FeCl2 + 2HCl + S   [(F); (H) green; (G) pale yellow]
(v) FeCl3 + 3NH4CNS → Fe(CNS)3 + 3NH4Cl   [(F); (I) blood-red colour]
Hence, (A) is FeSO4·7H2O.

Teacher's Note: Green crystals, BaSO4 test, Fe2O3 residue and SCN− blood-red colour together identify green vitriol.

Exam Note: Letter-wise answers A to I with equations earn marks.

Question 6. To a solution containing Ca2+, Ag+, Cu2+ and K+, 2M HCl is added, when a white ppt. (A) is obtained. After filtration H2S is passed through the filtrate, a black ppt. (B) is formed. On removing (B) by filtration, it gave white ppt. (C) with conc. Na2CO3 solution. Identify (A), (B) and (C).

Solution. (i) Ag+ ions with HCl will form a white ppt. of AgCl, i.e., Ag+ + Cl− → AgCl (white ppt., A).
(ii) After filtration AgCl is filtered out and filtrate contains Cu2+, Ca2+ and K+ ions. With H2S, Cu2+ ions form a black ppt. of CuS, i.e., Cu2+ + S2− → CuS (black ppt., B).
(iii) On filtration the filtrate has Ca2+ and K+ ions. With conc. Na2CO3, Ca2+ ions will form white ppt. of CaCO3, i.e., Ca2+ + CO32− → CaCO3 (white ppt., C).
So, (A) = AgCl, (B) = CuS, (C) = CaCO3.

Teacher's Note: Group separation: HCl removes Ag+, H2S removes Cu2+, carbonate then precipitates Ca2+; K+ stays.

Exam Note: Order of reagents decides each precipitate.

Question 7. A gaseous mixture containing (X), (Y) and (Z) gases, when passed into acidified K2Cr2O7 solution, gas (X) was absorbed and the solution was turned green. The remainder gas mixture was then passed through lime water, which turns milky by absorbing gas (Y). The residual gas when passed through alkaline pyrogallol solution, it turned black. Identify gas (X), (Y) and (Z) and explain the reaction involved.

Solution. (1) Gas (X) is absorbed in acidified K2Cr2O7 and the solution turns green. So, (X) is SO2.
(2) Gas (Y) is absorbed in lime water turning it white so (Y) is CO2.
(3) Gas (Z) is absorbed by pyrogallol so (Z) is O2.
Reactions:
(1) 3SO2 + K2Cr2O7 + H2SO4 → K2SO4 + Cr2(SO4)3 + H2O   (green)
(2) Ca(OH)2 + CO2 → CaCO3↓ + H2O   (white)
(3) O2 + pyrogallol → absorbed

Teacher's Note: Each gas has its own absorbent: SO2 (dichromate turns green), CO2 (lime water), O2 (alkaline pyrogallol).

Exam Note: Match gas to absorbent with colour change.

Question 8. When 16.8 g of a white solid (X) were heated, 4.4 g of a gas (A) that turned lime water milky was driven off together with 1.8 g of a gas (B), which condensed to a colourless liquid. The solid that remained (Y), dissolved in water to give an alkaline solution, which with excess of BaCl2 solution gave a white ppt. (Z). The precipitate effervesced with acid giving off CO2. Identify (A), (B) and (Y) and write down the equation for thermal decomposition (X).

Solution. (1) (A) turns lime water milky, so (A) is CO2 or SO2 gas.
(2) (Y) gives alkaline solution and its solution forms white ppt. (Z) with BaCl2 and (Z) on heating with acid gives effervescences of CO2, so (Z) is BaCO3 and (Y) is metal carbonate.
(3) Since, (Y) and (A) are formed from (X) and thus, (X) is metal bicarbonate and (A) is CO2.
(4) X →(Δ) A + B + Y   (16.8 g → 4.4 g + 1.8 g)
(5) The above data reveal that, 2MHCO3 → CO2 + H2O + M2CO3
4.4 g CO2 is obtained by 16.8 g MHCO3
44 g CO2 is obtained by 168 g MHCO3
Molar mass of MHCO3 = 168/2 = 84 g mol−1
∴ Atomic mass of metal = 23. Hence, metal is Na.
Reactions: 2NaHCO3 →(Δ) CO2 + H2O + Na2CO3   [(X); (A); (B); (Y)]
Thus (A) = CO2, (B) = H2O, (Y) = Na2CO3, (X) = NaHCO3.

Teacher's Note: Moles of CO2 (0.1) give 0.2 mol bicarbonate, so M(MHCO3) = 84 and the metal is Na.

Exam Note: Show the mass-to-mole step giving 84 g/mol.

Question 9. When 20.02 g of a white solid (X) is heated, 4.4 g of an acid gas (A) and 1.8 g of a neutral gas (B) are evolved leaving a solid residue (Y) of mass 13.8 g. (A) turns lime water milky and (B) condenses into a liquid which changes anhydrous copper sulphate blue. The aqueous solution of (Y) is alkaline to litmus and gives 19.7 g of white precipitate (Z) with barium chloride solution. (Z) gives carbon dioxide with an acid. Identify (A), (B), (X), (Y) and (Z).

Solution. (1) (A) turns lime water milky so (A) is CO2 or SO2.
(2) (B) condenses into liquid turning anhydrous CuSO4 to blue, so (B) is H2O.
(3) (Y) gives alkaline solution and its solution forms white ppt. (Z) with BaCl2 and (Z) on heating with acid gives CO2 so (Z) is BaCO3 and (Y) is metal carbonate.
(4) Since, (Y) and (A) are formed from (X) and thus, (X) is metal bicarbonate.
(5) X →(Δ) A + B + Y   (20.02 g → 4.4 g + 1.8 g + 13.8 g)
(6) The above data reveal that, 2MHCO3 → CO2 + H2O + M2CO3
4.4 g CO2 is obtained by 20.02 g MHCO3
44 g CO2 is obtained by 200.2 g MHCO3
Molar mass of MHCO3 = 200.2/2 = 100.1 g mol−1
∴ Atomic mass of M = 39.1. Thus, metal is potassium.
Reactions: 2KHCO3 → CO2 + H2O + K2CO3   [(X); (A); (B); (Y)]
So (A) = CO2, (B) = H2O, (X) = KHCO3, (Y) = K2CO3, (Z) = BaCO3.

Teacher's Note: Same decomposition pattern as the previous problem; 100.1 g/mol minus 61 (HCO3) gives K = 39.1.

Exam Note: Check mass balance: 20.02 = 4.4 + 1.8 + 13.8 (approx.).

Question 10. The gas liberated on heating a mixture of two salts with NaOH, gives a reddish brown precipitate with an alkaline solution of K2HgI4. The aqueous solution of the mixture on treatment with BaCl2 gives a white precipitate which is sparingly soluble in conc. HCl. On heating the mixture with K2Cr2O7 and conc. H2SO4, red vapours (A) are produced. The aqueous solution of the mixture on treatment with potassium ferricyanide solution gives a deep blue colouration (B). Identify the radicals in the given mixture and write the balanced equations for the formation of (A) and (B). (IIT 1991)

Solution. (1) The gas liberated on heating the mixture with NaOH gives red ppt. with K2HgI4, so gas is NH3 and mixture contains NH4+ ions.
(2) The aqueous solution gives white ppt. with BaCl2, so mixture contains SO42− ions.
(3) Mixture on heating with K2Cr2O7 and H2SO4 gives red vapours (of CrO2Cl2), so mixture contains Cl− ions.
(4) Aqueous solution of mixture gives blue colour with K3Fe(CN)6 and thus, it contains Fe2+ ions.
(5) Thus, mixture has NH4+, Fe2+, SO42− and Cl−.
Reactions:
(I) NH4+ + NaOH → NH3 + Na+ + H2O
2K2HgI4 + 3NaOH + NH3 → [O(Hg)2NH2]I (brown) + 4KI + 2H2O + 3NaI
(II) SO42− + BaCl2 → BaSO4 + 2Cl−
(III) 4Cl− + K2Cr2O7 + 3H2SO4 → 2CrO2Cl2 (A, red) + K2SO4 + 3H2O + 2SO42−
(IV) 3Fe2+ + 2K3Fe(CN)6 → Fe3[Fe(CN)6]2 (B, blue) + 6K+

Teacher's Note: Red vapours of CrO2Cl2 (chromyl chloride test) show Cl−; Turnbull's blue shows Fe2+.

Exam Note: Give the four radicals and the equations for A and B.

Question 11. Write the balanced equations for the following:
(i) Excess of ammonia added to a solution of HgCl2 in water.
(ii) AgNO3 solution reacts with excess of KCNS.
(iii) Reaction of potassium ferrocyanide in concentrated solution with 50% HNO3.
(iv) Reaction of red lead with nitric acid.
(v) Reaction of sodium hydride with methyl borate in tetrahydrofuran (THF).

Solution. (i) HgCl2 + 2NH3 → Hg(NH2)Cl + NH4Cl
(ii) AgNO3 + 2KCNS → KNO3 + K[Ag(SCN)2]
(iii) 3K4[Fe(CN)6] + 4HNO3 → 3K3[Fe(CN)6] + NO + 3KNO3 + 2H2O
(iv) Pb3O4 + 4HNO3 → PbO2 + 2Pb(NO3)2 + 2H2O
(v) 4NaH + 4B(OCH3)3 →(THF) NaBH4 + 3NaB(OCH3)4

Teacher's Note: Red lead is Pb3O4 = 2PbO·PbO2, so acid dissolves the PbO part only; check atoms when balancing.

Exam Note: Balance atoms and charge in each equation.

Question 12. A light bluish green crystalline solid responds to the following tests:
(i) Its aqueous solution gives brown precipitate or colour with alkaline K2HgI4 solution.
(ii) Its aqueous solution gives blue colour with K3Fe(CN)6 solution.
(iii) Its solution in HCl gives white ppt. with BaCl2 solution.
Identify the ions present and suggest formula of compound. (IIT 1992)

Solution. (i) Compound gives brown ppt. with alkaline K2HgI4 and so contains NH4+ ions.
(ii) Compound gives blue colour with K3Fe(CN)6 and so contains Fe2+ ions.
(iii) Solution of compound in HCl gives white ppt. with BaCl2 and so it contains SO42− ions.
(iv) Bluish green compound with NH4+, Fe2+ and SO42− is Mohr's salt, i.e.,
FeSO4·(NH4)2SO4·6H2O → Fe2+ + SO42− + 2NH4+ + SO42− + 6H2O
Reactions:
3NaOH + NH3 + 2K2HgI4 → [O(Hg)2NH2]I (brown ppt.) + 4KI + 3NaI + 2H2O
3Fe2+ + 2K3Fe(CN)6 → Fe3[Fe(CN)6]2 (blue ppt.) + 6K+
SO42− + BaCl2 → BaSO4 (white ppt.) + 2Cl−

Teacher's Note: Nessler's reagent test, Turnbull's blue and BaSO4 point to the double salt Mohr's salt.

Exam Note: State three ions and formula FeSO4·(NH4)2SO4·6H2O.

Question 13. An orange solid (A) on heating gives a green residue (B), a colourless gas (C) and water vapour. The dry gas (C) on passing over heated Mg gave a white solid (D). (D) on reaction with water gave a gas (E) which formed dense white fumes with HCl. Identify (A) to (E) giving reactions. (IIT 1993)

Solution. (1) Assume compound (A) (NH4)2Cr2O7.
Reactions: (NH4)2Cr2O7 →(Δ) N2 + Cr2O3 + 4H2O   [(A); (C); (B) green]
N2 + 3Mg →(Δ) Mg3N2   (D)
Mg3N2 + 6H2O → 3Mg(OH)2 + 2NH3   (E)
NH3 + HCl → NH4Cl   (white fumes)

Teacher's Note: Orange ammonium dichromate undergoes the 'volcano' decomposition to green Cr2O3 and N2.

Exam Note: Identify A to E; N2 → Mg3N2 → NH3.

Question 14. An unknown inorganic compound (X) gave the following reactions:
(i) The compound (X) on heating gave a residue, oxygen and oxide of nitrogen.
(ii) An aqueous solution of compound (X) on addition to tap water gave a turbidity which did not dissolve in HNO3.
(iii) The turbidity dissolved in NH4OH.
Identify the compound (X) and give equations for the reactions (i), (ii) and (iii).

Solution. (1) Step (ii) suggests (X) to be a compound of Ag as it gives turbidity with tap water which contains Cl− and the turbidity is soluble in NH4OH.
(2) (X) may be AgNO3 since, it gives oxide of nitrogen.
Reactions:
2AgNO3 → 2Ag + O2 + 2NO2   [(X); residue]
AgNO3 + Cl− → AgCl + NO3−   [(X); tap water; turbidity]
AgCl + 2NH4OH → Ag(NH3)2Cl + 2H2O

Teacher's Note: Tap water carries Cl−; AgCl is insoluble in HNO3 but dissolves in ammonia as the diammine complex.

Exam Note: X = AgNO3; give all three equations.

Question 15. (i) A powdered substance (A) on treatment with fusion mixture gives a green coloured compound (B).
(ii) The solution of (B) in boiling water on acidification with dilute H2SO4 gives a pink coloured compound (C).
(iii) The aqueous solution of (A) on treatment with excess of NaOH and bromine water gives a brown precipitate or compound (D).
(iv) A solution of (D) in conc. HNO3 on treatment with lead peroxide at boiling temperature produced a compound (E) which was of the same colour as that of (C).
(v) A solution of (A) in dilute HCl on treatment with a solution of barium chloride gave a white precipitate of compound (F) which was insoluble in conc. HNO3 and conc. HCl.
Identify (A) to (F) and give balanced chemical equations for the reactions at steps (i) to (v). (Roorkee 2001)

Solution. (i) MnSO4 + 2Na2CO3 + 2KNO3 → Na2MnO4 + 2KNO2 + Na2SO4 + 2CO2   [(A) = MnSO4; (B) = Na2MnO4]
(ii) 3Na2MnO4 + 2H2SO4 → 2NaMnO4 + MnO2 + 2Na2SO4 + 2H2O   [(C) = NaMnO4, pink]
(iii) MnSO4 + 4NaOH + Br2 → MnO2 + Na2SO4 + 2NaBr + 2H2O   [(D) = MnO2, brown]
(iv) 2MnO2 + 4HNO3 → 2Mn(NO3)2 + 2H2O + O2
2Mn(NO3)2 + 5PbO2 + 6HNO3 → 2HMnO4 + 5Pb(NO3)2 + 2H2O   [(E) = HMnO4]
(v) MnSO4 + BaCl2 → BaSO4 + MnCl2   [(F) = BaSO4]

Teacher's Note: Fusion with an oxidising mixture makes green manganate; acid disproportionates it to pink permanganate.

Exam Note: Name A to F and balance steps (i) to (v).

Question 16. Starting from SiCl4, prepare the following in steps not exceeding the number given in parentheses (give reactions only):
(i) silicon (I).
(ii) linear silicon containing methyl groups only (IV).
(iii) Na2SiO3 (III). (IIT 2001)

Solution. (i) 3SiCl4(v) + 4Al(molten) → 4AlCl3 + 3Si
(ii) (a) 3SiCl4 + 4Al → 4AlCl3 + 3Si
(b) Corrected (balanced): Si + 2CH3Cl →(Cu powder, 570 K) (CH3)2SiCl2
(c) (CH3)2SiCl2 + 2H2O → (CH3)2Si(OH)2 + 2HCl   [HO–Si(CH3)2–OH]
(d) n (CH3)2Si(OH)2 →(polymerisation) HO–[Si(CH3)2–O]n–H (linear silicone, thermoplastic polymer)
(iii) (a) SiCl4 + 4H2O → H4SiO4 + 4HCl   (ortho-silicic acid)
(b) H4SiO4 →(Δ) SiO2 + 2H2O
(c) Corrected: SiO2 + Na2CO3 → Na2SiO3 + CO2 (book prints H2O as the second product)

Teacher's Note: Direct process gives (CH3)2SiCl2; hydrolysis then condensation builds linear silicone chains.

Exam Note: Stay within step limits; show methyl-chloride route for silicones.

Question 17. A black coloured compound (A) on reaction with dil. H2SO4 gives a gas (B) which on passing in a solution of an acid (C) gives a white turbidity (D). Gas (B) when passed in an acidified solution of a compound (E) gives a ppt. (F) soluble in dil. HNO3. After boiling this solution when an excess of NH4OH is added, a blue coloured solution (G) is formed. To this solution on addition of acetic acid and aq. K4Fe(CN)6 a chocolate precipitate (H) is obtained. On addition of an aqueous solution of BaCl2 to an aqueous solution of (E), a white ppt. insoluble in HNO3 is obtained. Identify the compounds from (A) to (H).

Solution. (1) The black coloured compound may be FeS, CuS or PbS, CoS, NiS because it reacts with dil. H2SO4 to produce H2S.
MS + H2SO4 → MSO4 + H2S   [(A); (B)]
(2) Gas H2S on passing through HNO3 (an oxidant) gives turbidity of S.
H2S + 2HNO3 → 2NO2 + 2H2O + S   [(B); (C); (D)]
(3) (E) is CuSO4 because it gives white ppt. of BaSO4 with BaCl2 and blue colour with NH4OH (a test for SO42− and Cu2+ respectively).
CuSO4 + BaCl2 → CuCl2 + BaSO4 (white)
(4) Gas (B), i.e., H2S gives black ppt. with CuSO4.
CuSO4 + H2S → CuS + H2SO4   [(E); (F) black]
(5) Compound (F) (CuS) gives Cu(NO3)2 with HNO3 which on treating with NH4OH gives blue colour.
Corrected: (book prints CuS + 2HNO3 → Cu(NO3)2 + H2S, which is not a valid reaction) 3CuS + 8HNO3 → 3Cu(NO3)2 + 2NO + 3S + 4H2O
Cu(NO3)2 + 4NH4OH → [Cu(NH3)4](NO3)2 + 4H2O   [(G) blue]
(6) (G) on acidifying with CH3COOH and then treating with K4Fe(CN)6 gives chocolate coloured ppt. of Cu2Fe(CN)6.
[Cu(NH3)4](NO3)2 + 4CH3COOH → Cu(NO3)2 + 4CH3COONH4
2Cu(NO3)2 + K4Fe(CN)6 → Cu2[Fe(CN)6] (chocolate ppt.) + 4KNO3
Thus, (A) = FeS, CuS, PbS, HgS, CoS, NiS (as printed), (B) = H2S, (C) = HNO3, (D) = S, (E) = CuSO4, (F) = CuS, (G) = Cu(NH3)4(NO3)2, (H) = Cu2Fe(CN)6.

Teacher's Note: Only sulphides releasing H2S fit A; CuS, tetrammine and chocolate Cu2[Fe(CN)6] fix E to H.

Exam Note: Follow chain A to H; chocolate ppt. confirms Cu2+.

Question 18. On the basis of following reactions, identify (A), (B), (C) and (D) and write down their chemical formulae:
(i) (A)aq. + Zn →(Heat) (B) gas
(ii) (A)aq. + (C) →(Heat) PH3
(iii) (A)aq. + NH4Cl →(Heat) (D) gas

Solution. (i) (A) is an alkali and the equation is,
2NaOH + Zn →(Heat) Na2ZnO2 + H2   [(A); (B)]
(ii) (A) is NaOH and (C) is phosphorus. The equation will be,
3NaOH + 3H2O + P4 →(Heat) PH3 + 3NaH2PO2   [(A); (C)]
(iii) (D) is NH3 gas and (A) is NaOH. The equation will be,
NaOH + NH4Cl →(Heat) NH3 + NaCl + H2O   [(A); (D)]
So (A) = NaOH, (B) = H2,(C) = P4, (D) = NH3.

Teacher's Note: Hot alkali reacts with Zn (H2), white phosphorus (PH3) and NH4+ (NH3), all pointing to NaOH.

Exam Note: Give formulae of A to D, equations (i) to (iii).

Question 19. A soluble compound of a poisonous element M, when heated with Zn/H2SO4 gives a colourless and extremely poisonous gaseous compound N, which on passing through a heated tube gives a silvery mirror of element M. Identify M and N. (IIT July 1997)

Solution. M is As; AsCl3 + 6H →(Zn/H2SO4) AsH3 + 3HCl   (N)
2AsH3 →(Δ) 2As + 3H2   (silvery mirror, M)

Teacher's Note: Marsh test: arsenic compound gives arsine, which decomposes on heating to an arsenic mirror.

Exam Note: M = As, N = AsH3 (Marsh test).

Question 20. Element (A) burns in nitrogen to give ionic compound (B). Compound (B) reacts with water to give (C) and (D). A solution of (C) becomes milky on bubbling CO2. Identify (A), (B), (C) and (D). (IIT July 1997)

Solution. 3Ca + N2 → Ca3N2 + 6H2O → 3Ca(OH)2 + 2NH3   [(A) Ca or Ba; (B) Ca3N2 or Ba3N2; (C) Ca(OH)2 or Ba(OH)2; (D) NH3]
Ca(OH)2 + CO2 → CaCO3 + H2O   (D) or BaCO3

Teacher's Note: Alkaline-earth nitride hydrolyses to hydroxide (limewater turns milky with CO2) and ammonia.

Exam Note: Equations for nitride formation, hydrolysis, milkiness.

Question 21. An aqueous solution of an unknown compound (X) gives the following reactions:
(i) It gives brown ppt. with alkaline KMnO4 solution.
(ii) It forms HCl and evolves O2 when reacted with Cl2 gas.
(iii) It liberates I2 from an acidified KI solution.
(iv) It gives orange yellow colour with acidified titanic sulphate solution.
Identify (X) and give the chemical equations for the reactions (i), (ii) and (iii). (Roorkee 1991)

Solution. From the (iv) point it is clear that the compound (X) is H2O2.
Ti(SO4)2 + 2H2O + H2O2 → H2TiO4 + 2H2SO4   [(X); pertitanic acid (yellow solution)]
(i) 2KMnO4 + 2KOH → 2K2MnO4 + H2O + O; H2O2 + O → H2O + O2
or 2KMnO4 + 2KOH + H2O2 → 2K2MnO4 + 2H2O + O2
2K2MnO4 + 2H2O → 2MnO2 (brown ppt.) + O2 + 4KOH
(ii) H2O2 + Cl2 → 2HCl + O2
(iii) H2O2 + 2KI + H2SO4 → K2SO4 + 2H2O + I2
Hence, (X) is H2O2.

Teacher's Note: Orange-yellow pertitanic acid is the specific test for H2O2, which acts as reductant and oxidant.

Exam Note: Identify H2O2; titanic sulphate test is decisive.

Question 22. An aqueous blue coloured solution of inorganic compound (X) gives following reactions:
(i) With an aqueous solution of barium chloride a precipitate insoluble in dil. HCl is obtained.
(ii) Addition of excess of KI gives a brown ppt. which turns white on addition of excess of hypo.
(iii) With an aqueous solution of K4Fe(CN)6 a chocolate coloured precipitate is obtained.
Identify (X) and give equations for the reactions for (i), (ii) and (iii) observations. (IIT 2000)

Solution. (i) Step (i) suggests that compound (X) contains SO42− radical.
(ii) Step (iii) suggests that the compound contains Cu2+ radical.
(iii) Hence, the salt is CuSO4.
Reactions:
(i) CuSO4 + BaCl2 → BaSO4 + CuCl2   (X; white ppt., insoluble in HCl)
(ii) 2CuSO4 + 4KI → 2CuI2 + 2K2SO4
2CuI2 → Cu2I2 + I2   (unstable)
I2 + 2Na2S2O3 → Na2S4O6 + 2NaI   (colourless)
(iii) 2CuSO4 + K4Fe(CN)6 → Cu2[Fe(CN)6] + 2K2SO4   (chocolate ppt.)

Teacher's Note: Brown I2 from Cu2+ + I− is removed by hypo, leaving white Cu2I2.

Exam Note: CuSO4; mention brown I2 removed by hypo.

Question 23. (i) Sodium salt of an acid (A) is formed on boiling white phosphorus with NaOH solution.
(ii) On passing chlorine through phosphorus kept fused under water, another acid (B) is formed which on strong heating gives metaphosphorus acid.
(iii) Phosphorus on treatment with conc. HNO3 gives an acid (C) which is also formed by the action of dilute H2SO4 on powdered phosphorite rock.
(iv) (A) on treatment with a solution of HgCl2 first gives a white precipitate of compound (D) and then a grey precipitate of (E).
Identify (A) to (E) and write balanced chemical equations for the reactions at steps (i) to (iv). (Roorkee 2001)

Solution. (i) P4 + 3NaOH + 3H2O → 3NaH2PO2 + PH3   (sodium hypophosphite)
Thus, acid (A) is H3PO2, i.e., hypophosphorous acid.
(ii) 2P + 3Cl2 + 6H2O → 2H3PO3 + 6HCl   (phosphorus acid)
Thus, acid (B) is H3PO3. H3PO3 → HPO2 + H2O
(iii) P4 + 20HNO3 → 4H3PO4 + 20NO2 + 4H2O
P4 + 10H2SO4 → 4H3PO4 + 10SO2 + 4H2O (phosphoric acid)
Thus, acid (C) is H3PO4.
(iv) H3PO2 + 2H2O → H3PO4 + 4H
Corrected (balanced): 2HgCl2 + 2H → Hg2Cl2 + 2HCl   (white, D)
Hg2Cl2 + 2H → 2Hg + 2HCl   (grey, E)

Teacher's Note: Hypophosphorous acid is a strong reductant: HgCl2 goes to white calomel, then grey mercury.

Exam Note: Name acids A to C; white then grey with HgCl2.

Question 24. Two ores of same metal (M) are A1 and A2.
(a) A1 →(Calcination) Black ppt. (C) + CO2 + H2O; A1 →(HCl/KI) I2 + ppt. (D)
(b) A2 →(Roasting) Gas (G) + Metal (M); (G) + K2Cr2O7 →(Acidified) Green solution
Identify M, (A1), (A2), C, D and G. (IIT 2004)

Solution. (a) CuCO3·Cu(OH)2 →(Δ) 2CuO + CO2 + H2O   (C = CuO, black)
A1 is malachite, an ore of Cu.
CuCO3·Cu(OH)2 + 4HCl → 2CuCl2 + CO2 + 3H2O
2CuCl2 + 4KI → 2CuI + 4KCl + I2   (D = Cu2I2)
(b) 2Cu2S + 3O2 →(Roasting) 2Cu2O + 2SO2↑   (G = SO2)
A2 is copper glance an ore of Cu.
2Cu2O + Cu2S →(auto reduction, during roasting) 6Cu + SO2
Corrected (balanced; book prints 4H2O): 3SO2 + K2Cr2O7 + H2SO4 → K2SO4 + Cr2(SO4)3 + H2O
Thus M = Cu, A1 = malachite, A2 = copper glance (Cu2S), C = CuO, D = Cu2I2, G = SO2.

Teacher's Note: Malachite calcines to black CuO; Cu2S roasting gives SO2 (green with dichromate) and Cu by self-reduction.

Exam Note: Name ores; Cu2+ + I− gives CuI + I2.

Question 25. A compound (X) imparts a golden yellow flame and shows the following reactions:
(1) Zinc powder when boiled with a concentrated aqueous solution of (X), dissolves and hydrogen is evolved.
(2) When an aqueous solution of (X) is added to an aqueous solution of stannous chloride, a white precipitate is obtained first which dissolves in excess of solution of (X).
Identify (X) and write equations at steps (1) and (2). (Roorkee 1990)

Solution. (X) imparts golden yellow flame and so contains Na+.
(i) Step 1 suggests that (X) is NaOH because it reacts with Zn to give H2.
Zn + 2NaOH → Na2ZnO2 + H2   (X)
(ii) (X) is also justified by step 2 reactions.
2NaOH + SnCl2 → Sn(OH)2 + 2NaCl   (white ppt.)
Sn(OH)2 + 2NaOH → Na2SnO2 + 2H2O   (excess, soluble)

Teacher's Note: Amphoteric Zn and Sn(OH)2 both dissolve in excess NaOH; golden yellow flame shows sodium.

Exam Note: X = NaOH; give both equations.

Question 26. A certain metal (A) is boiled in dilute nitric acid to give a salt (B) and an oxide of nitrogen (C). An aqueous solution of (B) with brine gives a precipitate (D) which is soluble in NH4OH. On adding aqueous solution of (B) to hypo solution, a white precipitate (E) is obtained. (E) turns black on standing. Identify (A) to (E). (Roorkee 1990)

Solution. (i) The compound (B) reacts with NaCl solution (brine) to give white precipitate (D) soluble in NH4OH so (D) is AgCl.
(ii) Thus, (B) must contain Ag+ ion.
(iii) (B) is obtained from (A) and dilute HNO3, so (B) is AgNO3 and (A) is Ag.
Reactions: 3Ag + 4HNO3 → 3AgNO3 + NO + 2H2O   [(A); (B); (C)]
AgNO3 + NaCl → AgCl + NaNO3   (D)
AgCl + 2NH4OH → Ag(NH3)2Cl + 2H2O   (soluble)
2AgNO3 + Na2S2O3 → Ag2S2O3 + 2NaNO3   (E, white)
Ag2S2O3 → Ag2S + SO3   (E, black)

Teacher's Note: White silver thiosulphate turns black as it decomposes to Ag2S; AgCl dissolves in ammonia.

Exam Note: A = Ag; explain the white to black change of E.

Question 27. A metal chloride (X) shows the following reactions:
(i) When H2S is passed in an acidified aqueous solution of (X), a black precipitate is obtained.
(ii) The precipitate obtained in step (i) is not soluble in yellow ammonium sulphide.
(iii) When a solution of stannous chloride is added to an aqueous solution of (X), a white precipitate is obtained which turns grey on addition of more of stannous chloride.
(iv) When an aqueous solution of KI is added to a solution of (X), a red precipitate is obtained which dissolves on addition of excess of KI.
Identify (X) and write down the equations for the reactions at steps (i), (iii) and (iv). (Roorkee 1991)

Solution. (1) (X) gives black ppt. in acid medium with H2S and thus, it may be HgCl2, PbCl2, CuCl2 or SnCl2.
(2) Black ppt. is insoluble in yellow ammonium sulphide and thus, it is not SnCl2.
(3) Steps (iii) and (iv) suggest that (X) is HgCl2.
Reactions:
(i) HgCl2 + H2S → HgS + 2HCl   [(X); black ppt.]
(ii) 2HgCl2 + SnCl2 → SnCl4 + Hg2Cl2   (white ppt.)
Hg2Cl2 + SnCl2 → SnCl4 + 2Hg   (grey ppt.)
(iii) HgCl2 + 2KI → HgI2 + 2KCl   (red ppt.)
HgI2 + 2KI → K2HgI4   (Nessler's reagent solution)

Teacher's Note: White Hg2Cl2 turning grey (Hg) with excess SnCl2, and red HgI2 dissolving in KI, identify Hg2+.

Exam Note: X = HgCl2; give precipitate colours at each step.

Question 28. An aqueous solution of a gas (X) shows the following reactions:
(i) It turns red litmus blue.
(ii) When added in excess to a copper sulphate solution, a deep blue colour is obtained.
(iii) On addition of FeCl3 solution a brown precipitate, soluble in dilute nitric acid, is obtained.
Identify (X) and give equations for the reactions at steps (i), (ii) and (iii). (Roorkee 1991)

Solution. (i) Aqueous solution of gas (X) turns red litmus blue, the solution is alkaline in nature. So the gas may be NH3.
(ii) With CuSO4, NH4OH gives deep blue coloured Cu(NH3)4SO4, i.e.,
CuSO4 + 4NH4OH → Cu(NH3)4SO4 + 4H2O   (deep blue complex)
(iii) FeCl3 + 3NH4OH → Fe(OH)3 + 3NH4Cl   (brown ppt.)
The brown precipitate of Fe(OH)3 forms soluble Fe(NO3)3 with dil. HNO3.
Fe(OH)3 + 3HNO3 → Fe(NO3)3 + 3H2O   (soluble)
Hence, (X) is NH3.

Teacher's Note: Only ammonia is basic, gives a deep blue tetrammine with Cu2+ and precipitates Fe(OH)3.

Exam Note: X = NH3; mention deep blue complex.

Question 29. A mixture consists 'A' (yellow solid) 'B' (colourless solid) which gives lilac colour in flame.
(a) Mixture gives black precipitate 'C' on passing H2S gas.
(b) 'C' is soluble in aquaregia and on evaporation of aquaregia and adding SnCl2 gives greyish black precipitate 'D'.
(c) The salt solution with NH4OH gives a brown precipitate.
(d) The sodium carbonate extract of the salt with CCl4/FeCl3 gives a violet colour layer.
(e) The sodium carbonate extract gives yellow precipitate with AgNO3 solution which is insoluble in NH3.
Identify 'A', 'B' and the precipitates 'C' and 'D'. (IIT 2003)

Solution. 'A' is HgI2 and 'B' is KI.
(a) HgI2 + H2S → HgS + 2HI   (black 'C')
(b) HgS →(aquaregia) HgCl2
HgCl2 + SnCl2 → SnCl4 + Hg   (grey black 'D')
(c) 2KI(aq.) + HgI2(aq.) → K2HgI4
Corrected (balanced): 2K2HgI4 + NH3 + 3KOH → [O(Hg)2NH2]I (brown) + 7KI + 2H2O
Sodium carbonate extract contains NaI.
(d) 2I− + 2Fe3+ → I2 + 2Fe2+
(e) I− + AgNO3 → NO3− + AgI   (yellow ppt. insoluble in NH4OH)

Teacher's Note: Lilac flame gives K+; iodide shown by violet CCl4 layer; Hg2+ by HgS and Nessler's brown ppt.

Exam Note: A = HgI2, B = KI, C = HgS, D = Hg.

Question 30. A certain salt (X) gives the following tests:
(i) Its aqueous solution is alkaline to litmus.
(ii) On strongly heating it swells to give glassy material.
(iii) When concentrated H2SO4 is added to a hot concentrated solution of (X), white crystals of a weak acid separate out.
Identify (X) and write down the chemical equations for reactions at (ii) and (iii). (Roorkee 1991)

Solution. (i) Aqueous solution of (X) is alkaline, so (X) may be an alkali metal salt.
(ii) On strong heating, (X) swells upto give a glassy mass, it may be borax.
(iii) This is further supported by the fact that its concentrated solution on treatment with concentrated solution of H2SO4 yields crystals of boric acid (a weak monobasic acid).
(iv) Hence, (X) is borax (Na2B4O7·10H2O).
Reactions:
(i) Na2B4O7 + 7H2O → 2NaOH + 4H3BO3   [(X); alkali]
(ii) Na2B4O7·10H2O →(Heat) Na2B4O7 + 10H2O
Na2B4O7 →(Heat) 2NaBO2 + B2O3   (glassy mass)
(iii) Na2B4O7 + H2SO4 + 5H2O → Na2SO4 + 4H3BO3   (weak acid)

Teacher's Note: Borax hydrolyses to NaOH and boric acid; heating gives the glassy NaBO2/B2O3 bead.

Exam Note: Mention alkaline hydrolysis, glassy bead and boric acid.

Question 31. An inorganic compound (X) gives brick red flame in the flame test. This (X) also shows the following reactions:
(i) Smell of chlorine when placed in moist air.
(ii) When KI is added to an aqueous suspension of (X) containing acetic acid, iodine is liberated.
(iii) When CO2 is passed through an aqueous suspension of (X), the turbidity transforms to a ppt.
(iv) When a paste of (X) in water is heated with ethyl alcohol, a product of anaesthetic use is obtained.
Identify (X) and write down chemical equations for reactions at steps (i), (ii) and (iii). (Roorkee 1992)

Solution. (X) gives brick red flame so, it contains Ca2+. Reactions (i), (ii) and (iii) suggest that the probable compound is bleaching powder (CaOCl2).
Reactions:
(i) CaOCl2 + H2O → Ca(OH)2 + Cl2↑   (smell)
(ii) CaOCl2 + 2CH3COOH → Ca(CH3COO)2 + Cl2 + H2O
2KI + Cl2 → 2KCl + I2
(iii) CaOCl2(aq.) + CO2 → CaCO3 + Cl2   (turbid; white ppt.)
(iv) CaOCl2 + H2O → Ca(OH)2 + Cl2
C2H5OH + Cl2 → CH3CHO + 2HCl
CH3CHO + 3Cl2 → CCl3CHO + 3HCl
2Ca(OH)2 + 2CCl3CHO → 2CHCl3 + (HCOO)2Ca   (anaesthetic: chloroform)

Teacher's Note: Brick red flame gives Ca2+; Cl2 release from moist air and acid shows bleaching powder; chloroform comes from ethanol.

Exam Note: X = CaOCl2; also give chloroform route.

Question 32. An aqueous solution of an inorganic compound (X) shows the following reactions:
(i) It decolourizes an acidified KMnO4 solution accompanied with evolution of oxygen.
(ii) It liberates I2 from acidified KI solution.
(iii) It gives brown precipitate with alkaline KMnO4 solution with evolution of O2.
(iv) It removes black stains from old oil paintings.
Identify (X) and give chemical reactions for the steps (i) to (iv). (Roorkee 1993)

Solution. (i) (X) removes black stains from old oil painting, so (X) is H2O2.
Reactions:
(i) 5H2O2 + 2KMnO4 + 3H2SO4 → K2SO4 + 2MnSO4 + 8H2O + 5O2
(ii) H2O2 + 2KI + H2SO4 → I2 + K2SO4 + 2H2O
(iii) 3H2O2 + 2KMnO4 → 2MnO2 + 2KOH + 3O2 + 2H2O
(iv) 4H2O2 + PbS → PbSO4 + 4H2O   (black PbS to white PbSO4)

Teacher's Note: H2O2 is a reductant towards KMnO4 and an oxidant towards KI and black PbS.

Exam Note: Cite acidic and alkaline KMnO4 products separately.

Question 33. A solid laboratory reagents (A) gives following reactions:
(i) On strongly heating, it gives two oxides of sulphur.
(ii) On adding aqueous NaOH solution to its aqueous solution, a dirty green precipitate is obtained, which starts turning brown on exposure to air. (Roorkee 1993)

Solution. Compound (A): (i) (A) gives two oxides of sulphur on heating and so (A) is FeSO4·7H2O.
(ii) FeSO4·7H2O →(Δ) FeSO4 + 7H2O   (A)
2FeSO4 →(Δ) Fe2O3 + SO2 + SO3
(iii) FeSO4 + 2NaOH → Fe(OH)2 + Na2SO4   (green)
Fe2+ →(oxidation/air, alkaline medium) Fe3+ + e   (brown)

Teacher's Note: Green vitriol gives SO2 and SO3 on heating; Fe(OH)2 oxidises in air to brown Fe(OH)3.

Exam Note: State A = FeSO4·7H2O with both reactions.

Question 34. Identify (A) to (D) in following steps giving chemical equations:
(i) A white amorphous powder (A) on strong heating gives a colourless non-combustible gas (B) and solid (C).
(ii) The gas (B) turns lime water milky and turbidity disappears with the passage of excess of gas.
(iii) The solution of (C) in dilute HCl gives a white precipitate with an aqueous solution of K4Fe(CN)6.
(iv) The solution of (A) in dilute HCl gives a white precipitate (D) on passing H2S in presence of excess of NH4OH.

Solution. (1) Gas (B) is formed on heating (A) and it turns lime water milky so (B) is CO2 and (A) has CO32− ions.
(2) Solution of (A) in alkaline medium gives white ppt. with H2S and so (A) may have Zn2+ ions.
(3) The compound (A), if taken ZnCO3, is also justified by the other reactions.
Reactions:
(i) ZnCO3 → ZnO + CO2   [(A); (C); (B)]
(ii) CO2 + Ca(OH)2 → CaCO3 + H2O   (white)
CaCO3 + H2O + CO2 → Ca(HCO3)2   (excess, soluble)
(iii) ZnO + 2HCl → ZnCl2 + H2O
2ZnCl2 + K4Fe(CN)6 → Zn2[Fe(CN)6] + 4KCl   (white ppt.)
(iv) ZnCl2 + H2S → ZnS + 2HCl   [(D) white ppt.]

Teacher's Note: CO2 turbidity vanishing in excess gas is the Ca(HCO3)2 test; white ZnS in ammoniacal medium fixes Zn2+.

Exam Note: A = ZnCO3, B = CO2, C = ZnO, D = ZnS.

Question 35. Identify the following: Na2CO3 →(SO2) (A) →(Na2CO3) (B) →(Elemental S) (C) →(I2) (D). Also mention the oxidation state of S in all the compounds. (IIT 2003)

Solution. Na2CO3 + 2SO2 + H2O → 2NaHSO3 + CO2   (A)
Corrected (balanced): 2NaHSO3 + Na2CO3 → 2Na2SO3 + H2O + CO2   (B)
Na2SO3 + S → Na2S2O3   (C)
2Na2S2O3 + I2 → Na2S4O6 + 2NaI   (D)
So (A) = NaHSO3, (B) = Na2SO3, (C) = Na2S2O3, (D) = Na2S4O6.
Oxidation states of S are +4 in NaHSO3 and Na2SO3; +6 and −2 (an average +2) in Na2S2O3; and +5 and 0 (an average +5/2) in Na2S4O6.

Teacher's Note: Sulphite dissolves S to give thiosulphate, which iodine oxidises to tetrathionate; average oxidation numbers are fractional.

Exam Note: Give A to D and S oxidation numbers (+4, +2, +5/2).

Question 36. How is boron obtained from borax? Give chemical equations with reaction conditions? Write the structure of B2H6 and its reaction with HCl. (IIT 2002)

Solution. Na2B4O7·10H2O →(Δ) Na2B4O7   (Borax)
Na2B4O7 + 2HCl → 2NaCl + H2B4O7   (tetraboric acid)
H2B4O7 + 5H2O → 4H3BO3   (boric acid)
2H3BO3 →(red hot) B2O3 + 3H2O   (boric anhydride)
B2O3 + 3Mg →(fusion) 2B + 3MgO   (boron)
Structure of B2H6: two BH2 units in one plane with terminal B–H bonds (H–B–H angle about 120°), and two bridging hydrogens above and below the plane (B–H–B bridge bond length 1.37 Å, B–H–B angle 97°, B···B distance 1.78 Å); the B–H–B bridge is a hydrogen bridge bond, i.e., a 3 centre-2 electron bond.

BBHHHHHH1.37 Å1.37 ÅB···B 1.78 Å120°120°97°
Reaction with HCl: B2H6 + HCl → B2H5Cl + H2

Teacher's Note: Borax is converted via boric acid to B2O3, then reduced with Mg; diborane has banana (3c-2e) bridges.

Exam Note: Write all five steps; note 3c-2e bridge bonds.

Question 37. A pale yellow inorganic compound (A) is insoluble in mineral acid but is soluble in aq. NH3 forming (B). It also dissolves in Na2S2O3 solution and forms (C). On boiling an aqueous solution of (C), a black ppt. (D) is obtained. When (D) is dissolved in HNO3 and HCl is added, a white ppt. (E) is obtained. (A) on heating with conc. H2SO4 and MnO2 yields brown fumes of (F). Identify (A) to (F).

Solution. (1) (A) on heating with conc. H2SO4 and MnO2 yields brown fumes and so it contains Br− ions.
(2) (A) is pale yellow solid insoluble in mineral acid but soluble in NH3 and thus, it is AgBr.
Reactions:
(1) AgBr + 2NH3 → [Ag(NH3)2]Br   [(A); (B), partially soluble]
(2) 2AgBr + Na2S2O3 → Ag2S2O3 + 2NaBr   (C)
Ag2S2O3 →(boil) Ag2S + SO3   (D, black ppt.)
(3) Ag2S + 2HCl → 2AgCl + H2S   (E, white ppt.)
(F) = Br2 (brown fumes).

Teacher's Note: AgBr dissolves in ammonia and hypo; heating the thiosulphate gives black Ag2S; MnO2/H2SO4 gives brown Br2.

Exam Note: A = AgBr; list B to F with colours.

Question 38. (i) Write down the structure of molecule having butterfly shape.
(ii) What is the volume strength of 1 molar solution of H2O2?
(iii) Complete the following:
LiH + CO2 →
LiH + SO2 →
H3PO3 + D2O →
(iv) Draw the structure of CuSO4·5H2O and point out the nature of bonds in it.
(v) What happens when As2S3 is mixed with yellow ammonium sulphide and then resulting mixture is acidified with HCl?
(vi) Conc. H2SO4 is not recommended to dry H2 gas unless cooled in a freezing mixture. Explain.
(vii) Write the hydrogen bonded lattice structure of H3BO3 and polymeric metaborate [B3O3(OH)4]−.

Solution. (i) CrO5 has the butterfly shape: Cr bonded to one O by a double bond and to two peroxo (O–O) groups, drawn below.

CrOOOOO
(ii) 1 M H2O2 means 34 g/litre H2O2.
∵ 34 g H2O2 or 1 litre H2O2 gives 11200 mL O2
∴ Volume strength = 11.2.
(iii) LiH + CO2 → HCOOLi
Corrected (balanced): 2LiH + 2SO2 → Li2S2O4 + H2↑ (the book prints LiH + 2SO2)
H3PO3 + D2O → D2HPO3 + H2O; only two ionisable H atoms are in H3PO3.
(iv) Co-ordinate bond: 4H2O with Cu2+; the fifth H2O molecule bonds with SO42− and H bonds between 2 of the co-ordinated H2O. The pentahydrate has a hydrogen bonded water molecule between the square planar Cu(H2O)42+ and tetrahedral SO42− ion. In this anion is also hydrated and has anion water. (Book figure: Cu at centre with four H2O in a square plane, a fifth H2O hydrogen-bonded to two coordinated H2O and to an O of the SO42− group; not redrawn.)
(v) As2S3 + 3(NH4)2S + 2S → 2(NH4)3AsS4   (soluble)
2(NH4)3AsS4 + 6HCl → 6NH4Cl + 3H2S + As2S5   (ppt.)
(vi) At ordinary temperature it reacts with H2 to form some SO2 due to its reduction: H2SO4 + H2 → SO2 + 2H2O
(vii) Boric acid: planar B(OH)3 units joined by O–H···O hydrogen bonds into a layered (sheet) lattice, each unit hydrogen-bonded to three neighbours. Polymeric metaborate anion [B3O3(OH)4]−: a six-membered ring of three B and three O atoms, one B tetrahedral carrying two OH groups (negative charge) and the other two B each carrying one OH. (Book figures not redrawn.)

Teacher's Note: CrO5: Cr(VI) with one oxo and two peroxo groups; 1 M H2O2 is 34 g/L giving 11.2 L O2.

Exam Note: Volume strength 11.2 V; give one line per part.

Question 39. A white substance (A) reacts with dilute H2SO4 to produce a colourless gas (B) and a colourless solution (C). The reaction between (B) and acidified K2Cr2O7 solution produces a green solution and a slightly coloured precipitate (D). The substance (D) burns in air to produce a gas (E) which reacts with (B) to yield (D) and a colourless liquid. Anhydrous copper sulphate is turned blue on addition to this colourless liquid. Addition of aqueous NH3 or NaOH to (C) produces first a precipitate, which dissolves in the excess of the respective reagent to produce a clear solution in each case. Identify (A), (B), (C), (D) and (E). Write the equations of the reactions involved. (IIT 2001)

Solution. (A) is ZnS,
ZnS + H2SO4 → ZnSO4 + H2S   [(A); (C); (B)]
3H2S + K2Cr2O7 + 4H2SO4 → K2SO4 + Cr2(SO4)3 + 7H2O + 3S   [(B); (D) white-grey]
S + O2 → SO2   [(D); (air); (E)]
SO2 + 2H2S → 2H2O + 3S   [(E); (B); colourless liquid; (D)]
5H2O + CuSO4 → CuSO4·5H2O   (white to blue)
ZnSO4 + 2NaOH → Zn(OH)2 + Na2SO4
Corrected (balanced): Zn(OH)2 + 2NaOH → Na2ZnO2 + 2H2O   (soluble)
Also in excess of NH4OH it forms soluble complex [Zn(NH3)4](OH)2.

Teacher's Note: ZnS releases H2S; dichromate gives sulphur; amphoteric Zn(OH)2 dissolves in excess alkali.

Exam Note: A to E: ZnS, H2S, ZnSO4, S, SO2.

Question 40. An inorganic compound (A), transparent like glass, is a strong reducing agent. Its hydrolysis in water gives a white turbidity. Aqueous solution of (A) gives white ppt. (C) with NaOH(aq.) which is soluble in excess NaOH. (A) reduces auric chloride to produce purple of cassius test. (A) also reduces I2 and gives chromyl chloride test.

Solution. (1) Since, (A) gives chromyl chloride test and thus, it has Cl− ions.
(2) Since, (A) is strong reducing agent so (A) is SnCl2.
Reactions:
(1) SnCl2 + H2O → Sn(OH)Cl + HCl   [solid (A); (B) white turbidity]
(2) SnCl2 + 2NaOH → Sn(OH)2 + 2NaCl   [(A); (C) white ppt.]
Sn(OH)2 + 2NaOH → Na2SnO2 + 2H2O   (soluble)
(3) 3SnCl2 + 2AuCl3 → 3SnCl4 + 2Au   (purple of cassius, colloidal gold)
(4) SnCl2 + 2HCl + I2 → SnCl4 + 2HI

Teacher's Note: Sn(II) is a strong reductant: it reduces Au3+ to colloidal gold and I2 to I−.

Exam Note: A = SnCl2; list hydrolysis, amphoterism, reductions.

Question 41. An inorganic Lewis acid (X) shows the following reactions:
(i) It fumes in moist air.
(ii) The intensity of fumes increases when a rod dipped in NH4OH is brought near it.
(iii) An acidic solution of (X) on addition of NH4Cl and NH4OH gives a precipitate which dissolves in NaOH solution.
(iv) An acidic solution of (X) does not give a precipitate with H2S.
Identify (X) and give chemical equation for steps (i) to (iii). (Roorkee 1994)

Solution. (X) is AlCl3, a Lewis acid which exists as dimer (Al2Cl6), sublimes at 180 °C and forms monomer at 400 °C.
(i) AlCl3 + 3H2O → Al(OH)3 + 3HCl↑   (fumes)
(ii) HCl + NH4OH → NH4Cl↑ + H2O   (white fumes)
(iii) AlCl3 + 3NH4OH → Al(OH)3 + 3NH4Cl   (white ppt.)
Al(OH)3 + NaOH → NaAlO2 + 2H2O   (soluble)
(iv) Dissociation of H2S is suppressed in acidic medium and thus does not provide sufficient [S2−] to cross over the Ksp of Al2S3.

Teacher's Note: Hydrolysis releases HCl, whose fumes thicken with NH3; amphoteric Al(OH)3 dissolves in NaOH.

Exam Note: X = AlCl3; explain why H2S gives no ppt.

Question 42. A certain inorganic compound (X) shows the following reactions:
(i) On passing H2S through an acidified solution of (X), a brown precipitate is obtained.
(ii) The precipitate obtained in first step dissolves in excess of yellow amm. sulphide.
(iii) On adding an aqueous solution of NaOH to a solution of (X), first a white precipitate is obtained which dissolves in excess of NaOH.
(iv) The aqueous solution of (X) reduces ferric chloride.
Identify the cation of (X) and give chemical equations for the steps (i), (iii) and (iv). (Roorkee 1994)

Solution. The cation of (X) is Sn2+.
(i) Sn2+ + H2S →(H+) SnS + 2H+   (brown ppt. soluble in yellow ammonium sulphide, step ii)
(iii) Sn2+ + 2NaOH → 2Na+ + Sn(OH)2   (white ppt.)
Sn(OH)2 + 2NaOH → Na2SnO2 + 2H2O   (soluble)
(iv) Sn2+ + 2Fe3+ → Sn4+ + 2Fe2+

Teacher's Note: Brown SnS dissolving in yellow ammonium sulphide (forming thiostannate) and a reducing action distinguish Sn2+.

Exam Note: Sn2+; write the three equations.

Question 43. (i) An inorganic iodide (A) on heating with a solution of KOH gives a gas (B) and the solution of compound (C).
(ii) The gas (B) on ignition in air gives a compound (D) and water.
(iii) Copper sulphate is finally reduced to the metal on passing (B) through its solution.
(iv) A precipitate of compound (E) is formed on reaction of (C) with copper sulphate solution.
Identify (A) to (E) and give chemical equations for steps (i) to (iv). (Roorkee 1994)

Solution. (A) is PH4I.
(i) PH4I + KOH → KI + PH3 + H2O   [(A); (C); (B)]
(ii) 2PH3 + 4O2 → P2O5 + 3H2O   [(B); (D)]
(iii) 3CuSO4 + 2PH3 → 3H2SO4 + Cu3P2 → Cu
(iv) 2CuSO4 + 4KI → Cu2I2 + 2K2SO4 + I2   [(E) precipitate]

Teacher's Note: Phosphonium iodide behaves like an ammonium salt with alkali, giving PH3 and KI; Cu2+ + I− gives CuI.

Exam Note: A = PH4I; E = Cu2I2.

Question 44. (i) A black mineral (A) on heating in presence of air gives a gas (B).
(ii) The mineral (A) on reaction with dil. H2SO4 gives a gas (C) and solution of compound (D).
(iii) On passing gas (C) into an aqueous solution of (B), a white turbidity is obtained.
(iv) The aqueous solution of compound (D) on reaction with potassium ferricyanide gives a blue compound (E).
Identify (A) to (E) and give chemical equations to steps (i) to (iv). (Roorkee 1994)

Solution. (A) is FeS.
(i) 4FeS + 7O2 → 2Fe2O3 + 4SO2   [(A); (B)]
(ii) FeS + H2SO4 → FeSO4 + H2S   [(D); (C)]
(iii) 2H2S + SO2 → 2H2O + 3S   (turbidity)
or Corrected (balanced): 2H2S + H2SO3 → 3S + 3H2O (the book prints S + 3H2O)
(iv) 3FeSO4 + 2K3[Fe(CN)6] → Fe3[Fe(CN)6]2 + 3K2SO4   [(D); (E) ferro ferricyanide, blue]

Teacher's Note: Black FeS gives SO2 on roasting and H2S with acid; they react to give sulphur (turbidity).

Exam Note: A = FeS; Turnbull's blue confirms Fe2+.

Question 45. Write down the reactions involved in extraction of Pb. What is oxidation number of lead in litharge? (IIT 2003)

Solution. Galena: Corrected (balanced): 2PbS + 3O2 → 2PbO + 2SO2 (roasting; the book prints O2 without the coefficient 3)
PbS + 2O2 → PbSO4 (roasting)
PbS + 2PbO → 3Pb + SO2 (auto reduction)
PbS + PbSO4 → 2Pb + 2SO2 (auto reduction)
Oxidation number of Pb in litharge (PbO) = +2.

Teacher's Note: Partial roasting of galena gives PbO and PbSO4, which react with remaining PbS (self-reduction) to give Pb.

Exam Note: Roasting then self-reduction; Pb is +2 in PbO.

Question 46. (A) is binary compound of a univalent metal. 1.422 g of (A) reacts completely with 0.321 g of sulphur in an evacuated and sealed tube to give 1.743 g of a white crystalline solid (B) that formed a hydrated double salt (C) with Al2(SO4)3. Identify (A), (B) and (C). (IIT 1994)

Solution. (i) (B) forms double salt with Al2(SO4)3 and thus, may be K2SO4.
(ii) (A) + S → (B) K2SO4
∵ 1.743 g K2SO4 is obtained by 1.422 g (A)
∴ 174 g K2SO4 is obtained by (1.422 × 174)/1.743 = 142 g (A)
∵ 174 g K2SO4 requires 32 g S
∴ 1.743 g K2SO4 requires (32 × 1.743)/174 = 0.321 g S
Thus, given data confirms that (B) is K2SO4.
Now 2(A) + S → K2SO4   [(A) a potassium salt]
Molar mass of (A) × 2 = 142
∴ Molar mass of (A) = 71
Since, (A) is pot. salt
∴ Molar mass of left component = 71 − 39 = 32
Thus, salt is KO2.
2KO2 + S → K2SO4 →(Al2(SO4)3, aq.) K2SO4·Al2(SO4)3·24H2O   [(A); (B); (C)]

Teacher's Note: Mass data give M(A) = 71, so A is KO2 (71 − 39 = 32); C is potash alum.

Exam Note: Show 142 g and 71 g/mol steps; C = potash alum.

Question 47. A scarlet compound (A) is treated with conc. HNO3 to give a chocolate brown precipitate (B). The precipitate is filtered and the filtrate is neutralised with NaOH. Addition of KI to the resulting solution gives a yellow precipitate (C). The precipitate (B) on warming with conc. HNO3 in the presence of Mn(NO3)2 produces a pink-coloured solution due to the formation of (D). Identify (A), (B), (C) and (D). Write the reaction sequence. (IIT 1995)

Solution. The scarlet red compound (A) is Pb3O4.
The reactions are,
Pb3O4 + 4HNO3 → 2Pb(NO3)2 + PbO2↓ + 2H2O   [(A) conc.; solution; (brown ppt.) (B)]
Pb(NO3)2 + 2KI → PbI2↓ + 2KNO3   [yellow ppt. (C)]
5PbO2 + 2Mn(NO3)2 + 4HNO3 → 4Pb(NO3)2 + Pb(MnO4)2 + 2H2O   [purple colour (D)]

Teacher's Note: Red lead (2PbO·PbO2) leaves brown PbO2; PbO2 oxidises Mn2+ to permanganate in HNO3.

Exam Note: A = Pb3O4; B = PbO2; C = PbI2.

Question 48. (i) A white precipitate (B) is formed when a mineral (A) is boiled with Na2CO3 solution.
(ii) The precipitate is filtered and the filtrate contains two compounds (C) and (D). The compound (C) is removed by crystallisation and when CO2 is passed through the mother liquor (D) changes to (C).
(iii) The compound (C) on strong heating gives two compounds (D) and (E).
(iv) (E) on heating with cobalt oxide produces blue coloured substance (F).
Identify (A) to (F) and give chemical equations for the reactions at steps (i) to (iv). (Roorkee 1995)

Solution. The mineral (A) and other compounds are:
(A) Ca2B6O11·5H2O (Colemanite); (B) CaCO3 (Calcium carbonate); (C) Na2B4O7 (Borax); (D) NaBO2 (Sodium metaborate); (E) B2O3 (Boric anhydride); (F) Co(BO2)2 (Cobalt metaborate).
The reactions are,
Corrected (balanced; the book prints one NaBO2): Ca2B6O11 + 2Na2CO3(aq.) → 2CaCO3↓ + Na2B4O7 + 2NaBO2
4NaBO2 + CO2 → Na2B4O7 + Na2CO3
Na2B4O7 →(Δ) 2NaBO2 + B2O3
B2O3 + CoO → Co(BO2)2   (blue)

Teacher's Note: Colemanite plus sodium carbonate gives insoluble CaCO3 and soluble borax/metaborate; CO2 converts metaborate to borax.

Exam Note: Name mineral and the cobalt blue bead test.

Question 49. (i) A black mineral (A) on treatment with dilute sodium cyanide solution in presence of air gives a clear solution of (B) and (C).
(ii) The solution of (B) on reaction with zinc gives precipitate of a metal (D).
(iii) (D) is dissolved in dil. HNO3 and the resulting solution gives a white precipitate (E) with dil. HCl.
(iv) (E) on fusion with sodium carbonate gives (D).
(v) (E) dissolves in aqueous solution of ammonia giving a colourless solution of (F).
Identify (A) to (F) and give balanced chemical equations for reactions at steps (i) to (v). (Roorkee 1995)

Solution. (A) Ag2S (a black mineral); (B) NaAg(CN)2; (C) Na2S; (D) Ag; (E) AgCl; (F) Ag(NH3)2Cl.
The reactions are,
(1) Ag2S + 4NaCN → 2NaAg(CN)2 + Na2S
(2) 2NaAg(CN)2 + Zn → Na2Zn(CN)4 + 2Ag
(3) 3Ag + 4HNO3 → 3AgNO3 + NO + 2H2O
(4) AgNO3 + HCl → AgCl + HNO3
(5) AgCl + 2NH3 → Ag(NH3)2Cl
(6) 4AgCl + 2Na2CO3 → 4Ag + 4NaCl + 2CO2 + O2

Teacher's Note: Cyanide leaching of argentite (air oxidises Na2S) then Zn displacement is the silver extraction route.

Exam Note: Cyanide process: leach, then displace Ag with Zn.

Question 50. Calcium burns in nitrogen to produce a white powder which dissolves in sufficient water to produce a gas (A) and an alkaline solution (B). The solution (B) on exposure to air produces a thin solid layer of (C) on the surface. Identify the compounds (A) and (B). (IIT 1996)

Solution. 3Ca + N2 → Ca3N2
Ca3N2 + 6H2O → 3Ca(OH)2 + 2NH3   [(B) alkaline = Ca(OH)2; (A) = NH3]
Ca(OH)2 + CO2 → CaCO3 + H2O   (C = solid CaCO3)

Teacher's Note: Calcium nitride hydrolyses to NH3 and limewater; the surface film is CaCO3 formed with air CO2.

Exam Note: A = NH3, B = Ca(OH)2; film is CaCO3.

Question 51. Gradual addition of KI solution to Bi(NO3)3 solution initially produces a dark brown precipitate which dissolves in excess of KI to give a clear yellow solution. Write chemical equations for the above reactions. (IIT 1996)

Solution. Bi(NO3)3 + H2O → Bi[(OH)(NO3)2] + HNO3
NO3− + 4H+ + 3e → NO + 2H2O
2I− → I2 + 2e
I2 + KI → KI3   (yellow solution)
(Answer as printed in the book.)

Teacher's Note: The book explains the brown colour by iodine produced by nitrate oxidising iodide; excess KI gives yellow triiodide.

Exam Note: Note I2 + I− gives yellow I3−.

Question 52. A colourless inorganic salt (A) decomposes completely at about 250 °C to give only two products, (B) and (C), leaving no residue. The oxide (C) is a liquid at room temperature and neutral to moist litmus paper while the gas (B) is a neutral oxide. White phosphorus burns in excess of (B) to produce a strong white dehydrating agent. Write balanced equations for the reactions involved in the above process. (IIT 1996)

Solution. NH4NO3 → N2O + 2H2O   [(A); (B); (C)]
10N2O + P4 → P4O10 + 10N2   (dehydrating agent)

Teacher's Note: Ammonium nitrate gives neutral N2O and water; N2O supports burning of P4 to P4O10.

Exam Note: A = NH4NO3; balance 10N2O + P4.

Question 53. (i) An inorganic compound (A) is formed on passing a gas (B) through a concentrated liquor containing sodium sulphide and sodium sulphite.
(ii) On adding (A) into a dilute solution of silver nitrate, a white precipitate appears which quickly changes into a black coloured compound (C).
(iii) On adding two or three drops of ferric chloride into the excess of solution of (A), a violet coloured compound (D) is formed. This colour disappears quickly.
(iv) On adding a solution of (A) into the solution of cupric chloride, a white precipitate is first formed which dissolves on adding excess of (A) forming a compound (E).
Identify (A) to (E) and give chemical reactions for the steps (i) to (iv). (Roorkee 1996)

Solution. (i) Na2S + Na2SO3 + I2 → Na2S2O3 + 2NaI   [(B); (A) = Na2S2O3] (equation as printed in the book)
(ii) Na2S2O3 + 2AgNO3 → Ag2S2O3 + 2NaNO3   (white)
Ag2S2O3 + H2O → Ag2S + H2SO4   [(C) black]
(iii) 3Na2S2O3 + 2FeCl3 → Fe2(S2O3)3 + 6NaCl   [(D) violet]
Corrected (balanced; the book prints 2Fe2+ + S4O62−): Fe2(S2O3)3 → 2Fe2+ + S4O62− + S2O32−   (colour disappears)
(iv) Na2S2O3 + CuCl2 → CuS2O3 + 2NaCl
2CuS2O3 + Na2S2O3 → Cu2S2O3 + Na2S4O6   (white)
3Cu2S2O3 + 2Na2S2O3 → Na4[Cu6(S2O3)5]   [(E) soluble]

Teacher's Note: Hypo gives white then black silver thiosulphate/sulphide, a transient violet Fe3+ complex, and a soluble cuprous thiosulphate complex.

Exam Note: Link each observation: white to black, violet fades.

Question 54. (i) A black coloured compound (B) is formed on passing hydrogen sulphide through the solution of a compound (A) in NH4OH.
(ii) (B) on treatment with hydrochloric acid and potassium chlorate gives (A).
(iii) (A) on treatment with potassium cyanide gives a buff coloured precipitate which dissolves in excess of this reagent forming a compound (C).
(iv) The compound (C) is changed into a compound (D) when its aqueous solution is boiled.
(v) The solution of (A) was treated first with excess of sodium bicarbonate and then with bromine water. On cooling and shaking for sometime, a green colour of compound (E) is formed. No change is observed on heating.
Identify (A) to (E) and give chemical equations for the reactions at steps (i) to (v). (Roorkee 1996)

Solution. (i) CoCl2 + H2S →(NH4OH) CoS + 2HCl   [(A) = CoCl2; (B) = CoS, black]
(ii) CoS + 2HCl →(KClO3) CoCl2 + H2S
(iii) CoCl2 + 2KCN → Co(CN)2 + 2KCl   (buff ppt.)
Co(CN)2 + 4KCN → K4Co(CN)6   [(C) soluble]
(iv) 2K4Co(CN)6 →(H2O, Δ, [O]) 2K3Co(CN)6 + 2KOH   [(C); (D)]
(v) CoCl2 + 2NaHCO3 → Co(HCO3)2 + 2NaCl
Co(HCO3)2 + 4NaHCO3 → Na4[Co(CO3)3] + 3H2O + 3CO2
2Na4[Co(CO3)3] + H2O + O → 2Na3[Co(CO3)3] + 2NaOH   (E, green)

Teacher's Note: Black CoS, buff Co(CN)2 and its hexacyanide, and green Co(III) carbonato complex are characteristic of cobalt.

Exam Note: A = CoCl2; Co(II) to Co(III) oxidation in (iv), (v).

Question 55. Give complete and balanced chemical equations for the following: Sodium chromite solution reacts with H2O2 in presence of NaOH. (IIT 2001)

Solution. Na2CrO3 + H2O2 → Na2CrO4 + H2O   (as printed in the book; Cr(III) is oxidised to yellow chromate)

Teacher's Note: In alkaline medium H2O2 oxidises chromite (Cr(III)) to yellow chromate (Cr(VI)).

Exam Note: Show Cr(III) to Cr(VI); chromate is yellow.

Question 56. Nickel chloride is mixed with dimethyl glyoxime. When ammonium hydroxide is slowly added, a shining red precipitate is formed.
(a) Give the structure of the complex showing hydrogen bonds.
(b) Give the charge and the state of hybridisation of the central metal ion.
(c) Predict the magnetic behaviour of complex. (IIT 2004)

Solution. (a) Ni2+ ions react with dimethyl glyoxime in slightly alkaline medium as: Ni2+ + 2 (CH3–C=NOH)2 + 2NH4OH → [Ni(dmg)2] + 2NH4+ + 2H2O. Structure: Ni at the centre bonded to four N atoms (two from each dimethylglyoximate, each ligand is CH3–C=N–O− joined to CH3–C=N–OH through the carbon–carbon bond); the two ligands lie in one plane and each ligand's O···H–O hydrogen bond closes a six-membered ring between the two ligands (two O–H···O bonds in all). (Book figure not redrawn.)
(b) The charge on Ni in the complex is +2 and the hybridisation of Ni2+ in the given complex is dsp2 having square planar nature.
(c) The complex is diamagnetic as it has no unpaired electron.

Teacher's Note: Ni(dmg)2 is square planar dsp2, with all electrons paired and two O–H···O hydrogen bonds.

Exam Note: Give +2, dsp2, square planar, diamagnetic.

Question 57. (i) A blue coloured compound (A) on heating gives two products (B) and (C).
(ii) A metal (D) is deposited on passing hydrogen through heated (B).
(iii) The solution of (B) in HCl on treatment with K4[Fe(CN)6] gives a chocolate brown coloured precipitate of compound (E).
(iv) (C) turns lime water milky which disappears on continuous passage of (C) forming a compound (F).
Identify (A) to (F) and give chemical equations for the reactions at steps (i) to (iv). (Roorkee 1997)

Solution. (i) CuCO3 → CuO + CO2   [(A); (B); (C)]
(ii) CuO + H2 → Cu + H2O   (D)
(iii) CuO + 2HCl → CuCl2 + H2O
2CuCl2 + K4Fe(CN)6 → Cu2[Fe(CN)6] + 4KCl   (E chocolate)
(iv) Ca(OH)2 + CO2 → CaCO3 + H2O   (white)
CaCO3 + CO2 + H2O → Ca(HCO3)2   (F soluble)

Teacher's Note: Copper carbonate decomposes to black CuO and CO2; chocolate Cu2[Fe(CN)6] confirms Cu2+.

Exam Note: A = CuCO3; F = Ca(HCO3)2.

Question 58. (i) An aqueous solution of a white coloured compound (A) on reaction with HCl gives a white precipitate of compound (B).
(ii) (B) becomes soluble in chlorine water with the formation of (C).
(iii) (C) reacts with KI to give a precipitate which becomes soluble in excess of it forming a compound (D). The compound (D) is used for detecting ammonium salts.
(iv) (B) and (C) both, on treatment with SnCl2 give a grey precipitate of (E).
(v) When conc. H2SO4 is added slowly into a mixture of cold solutions of (A) and FeSO4, a brown ring of compound (F) is formed.
Identify (A) to (F) and give chemical equations for the reactions at steps (i) to (v). (Roorkee 1997)

Solution. (i) Hg2(NO3)2 + 2HCl → Hg2Cl2 + 2HNO3   [(A); (B)] (book prints HCl without the coefficient 2)
(ii) Hg2Cl2 + Cl2 → 2HgCl2   (soluble; C)
(iii) HgCl2 + 2KI → 2KCl + HgI2   (ppt.)
HgI2 + 2KI → K2HgI4   [(D) used for test of NH3; Nessler's reagent]
(iv) Hg2Cl2 + SnCl2 → SnCl4 + 2Hg   [(B); (E) grey]
2HgCl2 + 2SnCl2 → 2SnCl4 + 2Hg   [(C); (E)]
(v) Hg2(NO3)2 + 2H2SO4 → 2HgHSO4 + 2HNO3
6FeSO4 + 2HNO3 + 3H2SO4 → 3Fe2(SO4)3 + 4H2O + 2NO
FeSO4 + NO → FeSO4·NO   [(F) brown ring]

Teacher's Note: Mercurous nitrate gives white Hg2Cl2; chlorine oxidises it to HgCl2; nitrate gives the brown ring [Fe(NO)]SO4.

Exam Note: Chain A to F; brown ring test confirms nitrate.

Question 59. Compound (X) on reduction with LiAlH4 gives a hydride (Y) containing 21.72% hydrogen along with other products. The compound (Y) reacts with air explosively resulting in boron trioxide. Identify (X) and (Y). Give balanced reactions involved in the formation of (Y) and its reaction with air. Draw the structure of (Y). (IIT 2001)

Solution. 4BCl3 + 3Li[AlH4] → 2B2H6 + 3AlCl3 + 3LiCl   [(X) = BCl3; (Y) = B2H6]
% of H in B2H6 = (6/27.62) × 100 = 21.72%
Corrected (balanced; the book prints 2B2O3): B2H6 + 3O2 →(explosion in air) B2O3 + 3H2O; ΔH = −2008 kJ
Structure of B2H6: bridged structure with two terminal H on each B (H–B–H angle about 120°, B–H terminal bond 119 pm) and two bridging hydrogens (B–H–B bond 137 pm, angle 97°, B···B 178 pm); the dotted lines represent three centre-2-electron pair bonds or banana bonds.

BBHHHHHH1.37 Å1.37 ÅB···B 1.78 Å120°120°97°

Teacher's Note: Diborane has 21.7% H by mass; its bridging B–H–B bonds are 3-centre-2-electron bonds.

Exam Note: Show formation from BCl3 and bridged structure.

Question 60. Hydrogen peroxide acts both as an oxidising and as a reducing agent in alkaline solution towards certain first row transition metal ions. Illustrate both these properties of H2O2 using chemical equations. (IIT 1998)

Solution. Oxidising nature of H2O2: 2Cr(OH)3 + 4NaOH + 3H2O2 → 2Na2CrO4 + 8H2O
Reducing nature of H2O2: 2K3Fe(CN)6 + 2KOH + H2O2 → 2K4Fe(CN)6 + 2H2O + O2

Teacher's Note: Cr(III) is oxidised to chromate while Fe(III) in ferricyanide is reduced to Fe(II), both by H2O2 in alkali.

Exam Note: One oxidation and one reduction example, balanced.

Question 61. When the ore haematite is burnt in air with coke around 2000 °C along with lime, the process not only produces steel but also produces a silicate slag that is useful in making building materials such as cement. Discuss the same and show through balanced equations. (IIT 1998)

Solution. C + O2 → CO2
CO2 + C → 2CO
3CO + Fe2O3 → 2Fe + 3CO2   (steel) [reduction of Fe2O3 to form steel]
SiO2 + CaO → CaSiO3   (lime; slag) [slag, CaSiO3, is used as building material]

Teacher's Note: CO from coke reduces haematite; lime combines with silica gangue to form fusible CaSiO3 slag.

Exam Note: Show reduction and slag formation, both balanced.

Question 62. Thionyl chloride can be synthesized by chlorinating SO2 using PCl5. Thionyl chloride is used to prepare anhydrous ferric chloride starting from its hexahydrated salt. Alternatively, the anhydrous ferric chloride can also be prepared from its hexahydrated salt by treating with 2,2-dimethoxypropane. Discuss all this using balanced chemical equations. (IIT 1998)

Solution. SO2 + PCl5 → SOCl2 + POCl3
FeCl3·6H2O + 6SOCl2 → FeCl3 + 6SO2 + 12HCl
FeCl3·6H2O + 6CH3C(OCH3)2CH3 → FeCl3 + 12CH3OH + 6CH3COCH3

Teacher's Note: Direct heating of FeCl3·6H2O hydrolyses it; SOCl2 or the ketal removes water chemically.

Exam Note: Three balanced equations: SOCl2 prep and two dehydrations.

Question 63. (i) An aqueous solution of a compound (A) is acidic towards litmus and (A) is sublimed at about 300 °C.
(ii) (A) on treatment with an excess of NH4SCN gives a red coloured compound (B) and on treatment with a solution of K4[Fe(CN)6] gives a blue coloured compound (C).
(iii) (A) on heating with excess of K2Cr2O7 in presence of concentrated H2SO4 evolves deep red vapours of (D).
(iv) On passing the vapours of (D) into a solution of NaOH and then adding a solution of acetic acid and lead acetate, a yellow precipitate of compound (E) is formed.
Identify (A) to (E) and give chemical equations for the reaction at steps (ii) to (iv). (Roorkee 1998)

Solution. An observation of the experimental data reveals that (A) is FeCl3; red colour of Fe(SCN)3 with NH4SCN from (ii) and chromyl chloride test for Cl− from (iii). The reactions are:
(i) FeCl3 + 3H2O → Fe(OH)3 + 3HCl   (acidic solution due to hydrolysis of Fe3+) or Fe3+ + 3H2O → Fe(OH)3 + 3H+; FeCl3 sublimes at 300 °C.
(ii) FeCl3 + 3NH4SCN → Fe(SCN)3 + 3NH4Cl   [(B) red]
4FeCl3 + 3K4[Fe(CN)6] → Fe4[Fe(CN)6]3 + 12KCl   [(C) blue]
(iii) 4FeCl3 + 9H2SO4 + 3K2Cr2O7 → 6CrO2Cl2 + 2Fe2(SO4)3 + 3K2SO4 + 9H2O   [(D) red yellow vapours]
(iv) CrO2Cl2 + 4NaOH → 2NaCl + Na2CrO4 + 2H2O
Na2CrO4 + (CH3COO)2Pb → PbCrO4↓ + 2CH3COONa   [(E) yellow ppt.]

Teacher's Note: Hydrolysis explains the acidic solution; blood-red thiocyanate, Prussian blue and chromyl chloride identify Fe3+ and Cl−.

Exam Note: A = FeCl3; D = CrO2Cl2, E = PbCrO4.

Question 64. (i) The yellow coloured precipitate (A) is formed on passing H2S through a neutral solution of a salt (B).
(ii) (A) is soluble in hot dilute HNO3, but insoluble in yellow ammonium sulphide.
(iii) The solution of (B) on treatment with small quantity of NH3 gives white precipitate which becomes soluble in excess of it forming a compound (C).
(iv) The solution of (B) gives white precipitate with small concentration of KCN which becomes soluble in excess of this reagent forming a compound (D).
(v) The solution of (B) on treatment with H2S gives (A).
(vi) The solution of (B) in dilute HCl on treatment with a solution of BaCl2 gives white precipitate of compound (E) which is insoluble in conc. HNO3.
Identify (A) to (E) and give chemical equations for the reactions at steps (i) and (iii) to (vi). (Roorkee 1998)

Solution. An observation of the experimental data reveals that (A) is CdS: yellow ppt. of CdS from observation (i), and sulphate from observation (vi). The reactions are:
(i) CdSO4 + H2S → CdS + H2SO4   [(B); (A)]
(ii) CdS + 2HNO3 → Cd(NO3)2 + H2S   (soluble)
CdS + (NH4)2Sx → insoluble (yellow ammonium sulphide)
CdSO4 + 2NH4OH → Cd(OH)2 + (NH4)2SO4
(iii) Cd(OH)2 + 4NH4OH → [Cd(NH3)4](OH)2 + 4H2O   [(C) soluble]
(iv) CdSO4 + 2KCN → Cd(CN)2 + K2SO4   (white ppt.)
Corrected (balanced; the book prints one KCN): Cd(CN)2 + 2KCN → K2[Cd(CN)4]   [(D) soluble]
(v) K2[Cd(CN)4] + H2S → CdS + 2KCN + 2HCN
(vi) CdSO4 + BaCl2 → BaSO4 + CdCl2   [(E) insoluble in HNO3]

Teacher's Note: Yellow CdS not dissolving in yellow ammonium sulphide separates Cd from As/Sn; sulphate shows with BaCl2.

Exam Note: B = CdSO4, A = CdS; white Cd(OH)2 dissolves in NH3.

Question 65. A white solid is either Na2O or Na2O2. A piece of red litmus paper turns white when it is dipped into a freshly made aqueous solution of the white solid.
(i) Identify the substance and explain with balanced equation.
(ii) Explain what would happen to the red litmus if the white solid were the other compound? (IIT 1999)

Solution. (i) Na2O2 is a powerful oxidant and bleaching agent and bleaches red litmus paper to white in aqueous solution state.
Na2O2 + 2H2O → 2NaOH + H2O2
H2O2 + litmus red → white (bleaching)
(ii) The other compound Na2O will give NaOH on dissolution in water. The red litmus will turn to blue.

Teacher's Note: Na2O2 gives H2O2, which bleaches; Na2O gives only NaOH, which turns litmus blue.

Exam Note: Peroxide bleaches litmus; oxide turns red litmus blue.

Question 66. (A), (B) and (C) are three complexes of chromium (III) with the empirical formula H12O6Cl3Cr. All the three complexes have water and chloride ion as ligands. Complex (A) does not react with concentrated H2SO4, whereas complexes (B) and (C) lose 6.75% and 13.5% of their original mass, respectively, on treatment with concentrated H2SO4. Identify (A), (B) and (C). (IIT 1999)

Solution. (A) [Cr(H2O)6]Cl3 (violet)
(B) [Cr(H2O)5Cl]Cl2·H2O (green) (molar mass = 266.5 g mol−1)
(C) [Cr(H2O)4Cl2]Cl·2H2O (dark green)
Compound (A) contains six water molecules as coordinated water and thus, does not lose H2O on treatment with H2SO4. Compound (B) contains five water molecules as coordinated water and one water molecule as lattice water which is lost to H2SO4 showing a loss of 18 g out of 266.5 g, i.e., 6.75% loss. Similarly, compound (C) contains four coordinated water and two molecules of lattice water which are taken out by H2SO4 to show a loss of 13.5%.

Teacher's Note: Only lattice (uncoordinated) water is removed by H2SO4: 18/266.5 = 6.75% and 36/266.5 = 13.5%.

Exam Note: Hydrate isomers: match % mass loss to lattice water.

Question 67. An aqueous solution containing one mole of HgI2 and two mole of NaI is orange in colour. On addition of excess of NaI the solution becomes colourless. The orange colour reappears on subsequent addition of NaOCl. Explain with equations. (IIT 1999)

Solution. A solution containing one mole of HgI2 and two mole of NaI is orange in colour due to the partial solubility of HgI2. On addition of excess of NaI, the colourless complex Na2HgI4 is formed.
2NaI + HgI2 → Na2HgI4   (excess NaI)
The Na2HgI4 on addition of NaOCl, oxidises as:
3Na2HgI4 + 2NaOCl + 2H2O → 3HgI2 + 2NaCl + 4NaOH + 2NaI3
Thus, colour of partially soluble HgI2 is restored.

Teacher's Note: Excess iodide forms colourless [HgI4]2−; hypochlorite oxidises iodide, freeing HgI2 again.

Exam Note: Show complex formation and hypochlorite oxidation steps.

Question 68. Pyrolusite on heating with KOH in the presence of air gives a dark green compound (A). The solution of (A) on treatment with H2SO4 gives a purple coloured compound (B), which gives following reactions:
(i) KI on reaction with alkaline solution of (B) changes into a compound (C).
(ii) The colour of the compound (B) disappears on treatment with the acidic solution of FeSO4.
(iii) With conc. H2SO4 compound (B) gives (D) which can decompose to yield (E) and oxygen.
Identify (A) to (E) and write balanced equations for the formation of (A) and (B) and for the steps (i) to (iii). (Roorkee 1999)

Solution. Corrected (balanced; the book prints MnO2 + KOH →[O] K2MnO4 + H2O): 2MnO2 + 4KOH + O2 → 2K2MnO4 + 2H2O   [pyrolusite; (A) dark green]
3K2MnO4 + 2H2O →(dil. H2SO4) 2KMnO4 + MnO2 + 4KOH   [(B) purple]
(i) 2KMnO4 + KI + H2O → KIO3 + 2MnO2 + 2KOH   (C = KIO3)
(ii) 2KMnO4 + 8H2SO4 + 10FeSO4 → 2MnSO4 + K2SO4 + 5Fe2(SO4)3 + 8H2O
(iii) Corrected (balanced; the book prints 2KMnO4 + 2H2SO4 → 2K2SO4 + Mn2O7 + H2O): 2KMnO4 + H2SO4(conc.) → K2SO4 + Mn2O7 + H2O   (D = Mn2O7)
2Mn2O7 → 4MnO2 + 3O2   [(D); (E) = MnO2]

Teacher's Note: Manganate (green) disproportionates in acid to permanganate (purple); Mn2O7 is the explosive green oil from conc. H2SO4.

Exam Note: A = K2MnO4, B = KMnO4; balance each step.

Question 69. A crystalline inorganic compound (A), when it comes in contact with skin leaves a black stain. (A) is freely soluble in water and when to this solution some sodium chloride is added, a white precipitate appears which is insoluble in HNO3 but soluble in NH4OH. When hydrogen sulphide is passed through a solution of (A), a black precipitate appears. When potassium chromate is added to the solution of (A), a brick red precipitate results. To another portion of solution (A), mixed with ferrous sulphate in a test tube, concentrated sulphuric acid is added through the sides of the test tube, a brown ring results. Identify the compound and give equations for the various reactions involved.

Solution. The compound can be AgNO3.
Solution of (A) + NaCl → a white precipitate insoluble in HNO3 but dissolves in NH4OH, indicating the presence of Ag+ ions in solution (AgNO3 + NaCl → AgCl↓ + NaNO3; AgCl + 2NH4OH → Ag(NH3)2Cl + 2H2O).
Solution of (A) + H2S → Ag2S, a black precipitate soluble in HNO3 (2AgNO3 + H2S → Ag2S + 2HNO3).
Solution of (A) + K2CrO4 → Ag2CrO4, a brick red precipitate. Presence of Ag+ is confirmed (2AgNO3 + K2CrO4 → Ag2CrO4 + 2KNO3).
Solution of (A) + FeSO4 + conc. H2SO4 → a brown ring indicates the presence of nitrate. The compound is therefore identified as AgNO3.
2AgNO3 + H2SO4 → Ag2SO4 + 2HNO3
6FeSO4 + 3H2SO4 + 2HNO3 → 3Fe2(SO4)3 + 4H2O + 2NO
FeSO4 + NO → [FeSO4·NO]   (a brown ring)

Teacher's Note: Black skin stain, AgCl soluble in NH3, brick red Ag2CrO4 and brown ring identify Ag+ and NO3−.

Exam Note: Silver nitrate; list cation and anion tests.

Question 70. An inorganic compound, dark red in anhydrous state, absorbs moisture to become yellow. On heating it sublimes to form dimeric state in vapour phase. It acts as oxidant for SnCl2, liberates I2 from KI and converts H2S to S. Its aqueous solution is acidic. On heating aqueous solution with K4Fe(CN)6, a characteristic blue colour is obtained. What is the compound and give all the reactions involved?

Solution. The given statements suggest that given compound is FeCl3.
2FeCl3 + SnCl2 → SnCl4 + 2FeCl2
2FeCl3 + 2KI → 2FeCl2 + 2KCl + I2
2FeCl3 + H2S → 2FeCl2 + 2HCl + S
4FeCl3 + 3K4[Fe(CN)6] → Fe4[Fe(CN)6]3 + 12KCl

Teacher's Note: Anhydrous FeCl3 is dark and dimeric (Fe2Cl6) in vapour; Fe3+ oxidises Sn2+, I−, H2S.

Exam Note: FeCl3; give four reactions including Prussian blue.

Question 71. (i) Show that XeF4 and IF4− are isostructural.
(ii) Lithium does not form alum. Explain.
(iii) Write a balanced equation for the reaction of sodium thio sulphate with Cl2 in water.
(iv) Explain with reason the chromium hydroxide is treated with H2O2 in presence of NaOH.
(v) Explain with reason the relative Lewis acid order for boron halides.
(vi) Why is the graphite called most stable allotrope of carbon?
(vii) Which among PbO, PbO2 and Pb3O4 is the strongest oxidising agent?

Solution. (i) XeF4: Xe in XeF4 is sp3d2 hybridised (square planar, two lone pairs); IF4−: I in IF4− is sp3d2 hybridised with the same square planar shape and two lone pairs.

Xe / IFFFFlone pairlone pair
(ii) Lithium is too small in size to have a co-ordination number six.
(iii) Na2S2O3 + Cl2 + H2O → Na2SO4 + S + 2HCl
(iv) 2Cr(OH)3 + 4NaOH + 3H2O2 → 2Na2CrO4 + 8H2O
(v) Boron halides being electron deficient compounds are Lewis acid. The order of basic nature is BF3 < BCl3 < BBr3 < BI3 (as printed in the book; this is the order of Lewis acid strength). The order is just reverse to the normal expected order on the basis of electronegativity of halogens. This anomalous nature has been explained on the relatively decreasing tendency of halogens from F2 to I2 to back donate the unutilised electrons to the vacant p-orbitals of boron atom.
(vi) In graphite the sp2 hybridisation takes place giving rise to 3σ and 1π bond. The sigma bonds formed possess more s-character and thus, show more extent of overlapping in comparison to diamond which possesses sp3 hybridised state. Thus graphite possesses lower energy level.
(vii) Pb in Pb4+ state is a strong oxidising agent and thus PbO2 is the strongest among given oxidants and oxidises even HCl to Cl2.

Teacher's Note: Both ions have 4 bond pairs, 2 lone pairs; BF3 is weakest acid due to back-bonding.

Exam Note: Give hybridisation and shape; for (v) state BF3 weakest acid.

Question 72. A metallic oxide (A) is strongly acidic and forms violet vapours on warming and explodes violently at 55 °C giving out oxygen and a weak acidic oxide. The compound (A) on dissolution in water gives characteristic purple colour. What is (A)?

Solution. Mn2O7 → 2MnO2 + (3/2)O2;
Mn2O7 + H2O → 2HMnO4   (purple)

Teacher's Note: Mn(VII) oxide is acidic and unstable: it decomposes to MnO2 and O2 and gives purple HMnO4 with water.

Exam Note: A = Mn2O7; write both equations.

Question 73. In the contact process for industrial manufacture of sulphuric acid some amount of sulphuric acid is used as a starting material. Explain briefly. What is the catalyst used in the oxidation of SO2? (IIT 1999)

Solution. The SO2 is obtained by burning sulphur in air as, S + O2 → SO2. The SO2 so obtained is impure. Dust present in sulphur is removed by allowing the gas to expand, when some dust settles down, by passage through electrostatic precipitators and finally washing with water. The moistened gas is now treated with conc. H2SO4 to dry it, which is kept in use until its concentration falls to 94%. The SO2 so obtained is then catalytically converted to SO3.
2SO2 + O2 →(Pt asbestos, or finely divided Pt deposited on MgSO4, or Fe2O3 and CuO, or Pt-silica gel) 2SO3

Teacher's Note: Conc. H2SO4 is used only to dry the gas before it meets the catalyst (catalyst poisoning by moisture and dust).

Exam Note: Drying step uses conc. H2SO4; name the catalyst.

Question 74. When a white crystalline compound (X) is heated with K2Cr2O7 and concentrated H2SO4, a reddish brown gas (A) is evolved. On passing (A) into caustic soda, a yellow coloured solution of (B) is obtained. Neutralizing the solution of (B) with acetic acid and on subsequent addition of lead acetate a yellow precipitate (C) is obtained. When (X) is heated with NaOH solution, a colourless gas is evolved and on passing this gas into K2HgI4 solution, a reddish brown precipitate (D) is formed. Identify (A), (B), (C), (D) and (X). Write the equations of reactions involved. (IIT 2002)

Solution. 4NH4Cl + K2Cr2O7 + 6H2SO4 → 2CrO2Cl2 + 4NH4HSO4 + 2KHSO4 + 3H2O   [(X); (A) reddish brown gas] (this is chromyl chloride test)
CrO2Cl2 + 2NaOH → Na2CrO4 + 2HCl   [(B) yellow]
Na2CrO4 + (CH3COO)2Pb → PbCrO4 + 2CH3COONa   [(C) yellow ppt.]
NH4Cl + NaOH → NH3 + NaCl + H2O   [(X); colourless gas]
Corrected (balanced; the book prints one K2HgI4 and 3H2O): 2K2HgI4 + NH3 + 3KOH → NH2HgO·HgI + 7KI + 2H2O   [(D) reddish brown ppt.]
So (X) = NH4Cl, (A) = CrO2Cl2, (B) = Na2CrO4, (C) = PbCrO4, (D) = NH2HgO·HgI.

Teacher's Note: Chromyl chloride test gives Cl−; NH3 with Nessler's reagent gives brown iodide of Millon's base.

Exam Note: Cover chloride and ammonium tests with equations.

Question 75. Complete and balance the following equations:
(i) H2SO4 + HI → ...+...+...
(ii) CaOCl2 + NaI + HCl → ... + CaCl2 + H2O + NaCl
(iii) Ag2S + 2CuCl2 + 2Hg → ...+...+ S + 2Ag (Roorkee 1998)

Solution. (i) H2SO4 + 2HI → I2 + SO2 + 2H2O
(ii) CaOCl2 + 2NaI + 2HCl → I2 + CaCl2 + H2O + 2NaCl
(iii) Ag2S + 2CuCl2 + 2Hg → Cu2Cl2 + Hg2Cl2 + 2Ag + S

Teacher's Note: HI reduces H2SO4 to SO2; OCl− oxidises I−; Cu2+ and Hg couple gives Cu2Cl2, Hg2Cl2.

Exam Note: Balance electrons; list all products.

Question 76. Complete and balance the following equations:
(i) H2S + H2SO4 (conc.) → .....+.....+.....
(ii) NaOH (excess) + I2 → ..... + ..... + ..... H2O
(iii) NH3 + NaOCl → ..... + NaCl + H2O (Roorkee 1997)

Solution. (i) H2S + H2SO4(conc.) → 2H2O + SO2 + S
(ii) 6NaOH(excess) + 3I2 → 5NaI + NaIO3 + 3H2O
(iii) 2NH3 + 3NaOCl → N2 + 3NaCl + 3H2O

Teacher's Note: Iodine disproportionates in excess alkali to I− and IO3−; hypochlorite oxidises NH3 to N2.

Exam Note: Check atom and charge balance in (ii).

Question 77. Complete and balance the following equations:
(i) I2 + HNO3 (conc.) → .....+.....+.....
(ii) SF6 + H2O → .....+.....
(iii) SF4 + Cl2 → .....+.....+.....

Solution. (i) I2 + 10HNO3(conc.) → 2HIO3 + 10NO2 + 4H2O
(ii) SF6 + 3H2O → SO3 + 6HF
(iii) 3SF4 + 8Cl2 → 4BF3 + 3SCl2 + 3Cl2   (as printed in the book; this equation is not balanced and appears misprinted, so part (iii) needs a human check)

Teacher's Note: Conc. HNO3 oxidises I2 to iodic acid; SF6 is hydrolysed in the book's answer to SO3 and HF.

Exam Note: Balance (i) by electron count: I2 loses 10 e.

Question 78. (a) Reaction of phosphoric acid with Ca5(PO4)3F yields a fertilizer 'triple superphosphate'. Represent the same through a balanced chemical equation.
(b) Complete and balance the following chemical equations:
(i) P4O10 + PCl5 →
(ii) SnCl4 + C2H5Cl + Na →
(c) Work out the following using chemical equations:
(i) In moist air copper corrodes to produce a green layer on the surface.
(ii) Chlorination of calcium hydroxide produces bleaching powder. (IIT 1998)

Solution. (a) Ca5(PO4)3F + 7H3PO4 + 5H2O → 5Ca(H2PO4)2·H2O + HF
(b) (i) P4O10 + 6PCl5 → 10POCl3
(ii) SnCl4 + 4C2H5Cl + 8Na → (C2H5)4Sn + 8NaCl
(c) (i) 2Cu + CO2 + H2O + O2 → CuCO3·Cu(OH)2
(ii) 3Ca(OH)2 + 2Cl2 → Ca(OCl)2 + CaCl2·Ca(OH)2·H2O + H2O

Teacher's Note: Triple superphosphate is Ca(H2PO4)2; Wurtz-type coupling of C2H5Cl on SnCl4 gives tetraethyltin.

Exam Note: Balance Ca, P, H in (a); green layer is basic carbonate.

Question 79. Complete and balance the following chemical equations:
(i) Au + HCl + HNO3 → ...+...+...H2O
(ii) C + HNO3 (conc.) → CO2 + ... + ...H2O
(iii) Sn + KOH (hot) + H2O → ...+...
(iv) Cu(OH)2 + NH4NO3 + NH4OH (aq.) → ... + ...H2O (Roorkee 1999)

Solution. (i) Au + 4HCl + 3HNO3 → HAuCl4 + 3NO2 + 3H2O
(ii) C + 4HNO3(conc.) → CO2 + 4NO2 + 2H2O
(iii) Sn + 2KOH(hot) + H2O → K2SnO3 + 2H2
(iv) Cu(OH)2 + 2NH4NO3 + 2NH4OH(aq.) → Cu(NH3)4(NO3)2 + 4H2O

Teacher's Note: Aqua regia gives chloroaurate; tin dissolves in hot alkali as stannate with H2; ammonia gives the deep blue Cu complex.

Exam Note: Balance by electron count; (iii) gives H2.

Question 80. In the following equation,
A + 2B + H2O → C + 2D
(A = HNO2, B = H2SO3, C = NH2OH). Identify D. Draw the structures of A, B, C and D. (IIT 1999)

Solution. HNO2 + 2H2SO3 + H2O → NH2OH + 2H2SO4   [(A); (B); (C); (D) = H2SO4]
(A) HNO2: HO–N=O
(B) H2SO3: HO–S(=O)–OH (S carries a lone pair; pyramidal)
(C) NH2OH: H–N(H)–OH
(D) H2SO4: HO–S(=O)2–OH (the book draws the S→O coordinate bonds with arrows)

Teacher's Note: Sulphurous acid reduces nitrous acid to hydroxylamine and is itself oxidised to sulphuric acid.

Exam Note: D = H2SO4; draw S=O and S–OH bonds.

Question 81. The Haber process can be represented by the following scheme: CaCO3 → CaO + CO2; CaO + H2O → (A); CO2 reacts with NH3·H2O to give (B); (B) + NaCl → NaHCO3 + (D); NaHCO3 → (C) + H2O (+ CO2); (D) + (A) → NH3 + H2O + (E) (the question gives this as a cyclic flow diagram; the arrows are described here in words). Identify A, B, C, D and E. (IIT 1999)

Solution. (A) Ca(OH)2; (B) NH4HCO3; (C) Na2CO3; (D) NH4Cl; (E) CaCl2.

Teacher's Note: The scheme is the ammonia-soda (Solvay) cycle: NH3 is recovered from NH4Cl with slaked lime.

Exam Note: Name A to E; CaCl2 is the by-product.

Question 82. Match the following choosing one item from Column X and the appropriate item from Column Y. (Roorkee 2000)

XY
A. SO2Cl2(i) Paramagnetic
B. Ice(ii) Refrigeration
C. CuSO4 (anhydrous)(iii) Testing NH3
D. K2HgI4 + NaOH(iv) Testing H2O
E. Fluorocarbons(v) Hydrogen bonding
F. NO(vi) Tetrahedral

Solution. A – (vi) Tetrahedral; B – (v) H-bonding; C – (iv) Testing H2O; D – (iii) Testing NH3; E – (ii) Refrigeration; F – (i) Paramagnetic.

Teacher's Note: NO has an odd electron, so it is paramagnetic; Nessler's reagent (K2HgI4 + NaOH) tests NH3.

Exam Note: Six pairs: A-vi, B-v, C-iv, D-iii, E-ii, F-i.

Question 83. Complete the following by identifying (A) to (H):
(i) CuSO4·5H2O →(100 °C) (A) →(230 °C) (B) →(800 °C) (C) + (D)
(ii) AgNO3 →(red heat) (E) + (F) + O2
(iii) Na2B4O7 →(740 °C) (G) + (H) (Roorkee 2000)

Solution. (i) CuSO4·5H2O →(100 °C) CuSO4·H2O (A) →(230 °C) CuSO4 (B) →(800 °C) CuO (C) + SO3 (D)
(ii) 2AgNO3 →(red heat) 2Ag (E) + 2NO2 (F) + O2
(iii) Na2B4O7 →(740 °C) NaBO2 (G) + B2O3 (H) (balanced: Na2B4O7 → 2NaBO2 + B2O3)

Teacher's Note: Hydrated copper sulphate loses water in two steps, then SO3; AgNO3 gives Ag, NO2 and O2.

Exam Note: Write stage temperatures with each product.

Question 84. Ksp of CuS is less than Ksp of ZnS. During the qualitative analysis of a mixture containing Cu2+ and Zn2+ ions, H2S gas is passed through an acidified solution containing these ions in order to test Cu2+ alone. Explain briefly. (IIT 1998)

Solution. Ksp of CuS is less than Ksp of ZnS. On passing H2S in acidic medium, the dissociation of H2S is suppressed due to common ion effect and it provides [S2−] which is just sufficient to cross over Ksp of CuS and not Ksp of ZnS. Thus, only CuS gets precipitated.

Teacher's Note: Acid suppresses H2S ionisation, so ionic product exceeds only the smaller Ksp (CuS).

Exam Note: Use common ion effect and Ksp comparison.

Question 85. Give reasons for the following:
(i) The solubility of calcium acetate decreases while that of lead nitrate increases with increase in temperature.
(ii) Magnesium is not precipitated from a solution of its salt by NH4OH in presence of NH4Cl.
(iii) Yellow phosphorus is kept under water but not the red phosphorus.
(iv) Bleaching of flowers by SO2 gas is temporary while that with Cl2 gas is permanent. (Roorkee 2000)

Solution. (i) (CH3COO)2Ca shows exothermic dissolution whereas Pb(NO3)2 shows endothermic dissolution. According to Le-Chatelier principle the solubility of (CH3COO)2Ca decreases and solubility of Pb(NO3)2 increases with temperature.
(ii) The dissociation of NH4OH (a weak electrolyte) is suppressed in presence of NH4Cl due to common ion effect. Thus, [OH−] in solution becomes low. The ionic product of concentrations of Mg2+ and OH− ions does not exceed the solubility product of Mg(OH)2 and thus Mg(OH)2 is not precipitated.
(iii) Yellow phosphorus is very reactive (ignition temperature 30 °C) towards air whereas red phosphorus is quite unreactive (ignition temperature 260 °C). Thus, to avoid contact of yellow phosphorus from air, it is kept under water.
(iv) Bleaching of flower by SO2 follows reduction. The colour of bleached material is regained due to oxidation by air and is thus, temporary. The bleaching of flower by Cl2 follows oxidation and is thus permanent.

Teacher's Note: Four standard reasons: dissolution enthalpy, common-ion effect, ignition temperature, and reductive versus oxidative bleaching.

Exam Note: Give one-line reasoning for each; name the principle.

Question 86. (a) Write down the IUPAC nomenclature of the given complex along with its hybridisation and structure. K2[Cr(NO)(NH3)(CN)4]; μ = 1.73 BM. (IIT 2003)
(b) Draw the structures of [Co(NH3)6]3+, [Ni(CN)4]2− and [Ni(CO)4]. Write the hybridization of atomic orbitals of the transition metal in each case. (IIT 2000)

Solution. (a) Potassium ammine tetracyano nitrosonium chromium(I). Cr is in +1 oxidation state and possesses d2sp3 hybridisation with one unpaired electron. μ = √(n(n+2)) = √(1(1+2)) = √3 = 1.73 BM.
(b) [Co(NH3)6]3+: Co3+ is d2sp3 hybridised to show octahedral shape (Co at the centre with six NH3 at the corners of an octahedron).
[Ni(CN)4]2−: Ni2+ is dsp2 hybridised to show square planar shape (Ni at the centre with four CN at the corners of a square).
[Ni(CO)4]: Ni is sp3 hybridised to show tetrahedral shape (Ni at the centre with four CO at the corners of a tetrahedron). (Book figures described, not redrawn.)

Teacher's Note: Spin-only μ = 1.73 BM means one unpaired electron; strong-field CN− and NO+ make the complex low spin.

Exam Note: Link μ = √(n(n+2)) to hybridisation; give shapes.

Question 87. (a) AlF3 is not soluble in anhydrous HF but soluble in KF. Also when BF3 is added to the above solution, AlF3 is precipitated. Write the balanced chemical equation. (IIT 2004)
(b) Predict whether Me3N and (SiMe3)3N are isostructural or not. Also justify your answer. (IIT 2005)

Solution. (a) AlF3 dissolves in ionic KF due to the formation of K3AlF6. On the other hand anhydrous: AlF3 + 3KF → K3[AlF6]   (soluble)
HF being weak acid does not dissociate to appreciable extent and AlF3 does not form [AlF6]3− or H[AlF4]. Addition of BF3 in K3[AlF6] forms AlF3 as insoluble mass because BF3 is more acidic than AlF3.
K3[AlF6] + BF3 → AlF3 + 3K[BF4]
(b) Me3N or (CH3)3N has three σ-bonds between sp3 hybridised nitrogen and carbon atom of CH3 group. The lone pair on N atom gives rise to pyramidal shape. In (SiMe3)3N, three Si–N bonds are present and lone pair on N atom is involved in back bonding with vacant 3d-orbitals of Si giving rise to trigonal planar geometry. So they are not isostructural.

Teacher's Note: Fluoride-ion donor KF makes soluble [AlF6]3−; stronger acid BF3 takes F−; N lone pair delocalises into Si 3d (planar).

Exam Note: Give the BF3 equation; N pyramidal versus planar.

Question 88. Write the order of Bronsted basic nature for the following oxides: CO2, BaO, Cl2O7, SO3, B2O3. (IIT 2004)

Solution. BaO > B2O3 > CO2 > SO3 > Cl2O7

Teacher's Note: Basic character falls as the oxide-forming element becomes more electronegative and gets a higher oxidation state.

Exam Note: Metal oxide most basic; Cl2O7 most acidic.

Question 89. (a) Give an example of oxidation of one halide by another halogen. Explain the feasibility of the reaction.
(b) Write the M.O. electron distribution of O2. Specify its bond order and magnetic property. (IIT 2000)

Solution. (a) 2KI(aq.) + Cl2 → 2KCl(aq.) + I2
In the reaction Cl2 oxidises iodide ion (−1 oxidation state) to I2 (0 oxidation state). Cl2 has higher reduction potential than I2 and thus oxidises iodide to iodine getting itself reduced to chloride ion. Similarly, 2KI + X2 (X = Cl, Br, F) → 2KX + I2.
(b) M.O. configuration of O2: σ1s2, σ*1s2, σ2s2, σ*2s2, σ2pz2, π2px2, π2py2, π*2px1, π*2py1
Bond order = ½ [No. of bonding electrons − No. of antibonding electrons] = ½ [10 − 6] = 2
Also, O2 molecule is paramagnetic as it possesses two unpaired electrons.

Teacher's Note: A halogen with higher reduction potential oxidises the halide of a lower one; O2 has two unpaired π* electrons.

Exam Note: Quote E° order for (a); bond order 2 and paramagnetic.

Question 90. Write balanced equations for the reactions of the following compounds with water: (i) Al4C3 (ii) CaNCN (iii) BF3 (iv) NCl3 (v) XeF4 (IIT 2002)

Solution. (i) Al4C3 + 12H2O → 4Al(OH)3 + 3CH4
(ii) CaNCN + 3H2O → CaCO3 + 2NH3
(iii) BF3 + 2H2O → [BF3OH]− H3O+
(iv) NCl3 + 3H2O → NH3 + 3HOCl
(v) 3XeF4 + 6H2O → 2Xe + XeO3 + (3/2)O2 + 12HF

Teacher's Note: Carbide gives CH4; NCl3 hydrolyses to NH3 and HOCl because Cl is the positive end; XeF4 disproportionates.

Exam Note: Five hydrolysis equations; check atoms.

Question 91. (a) (i) Write the chemical reactions involved in the extraction of metallic silver from argentite. (IIT 2000)
(ii) Write the balanced chemical equation for developing black and white photographic films. When sodium thiosulphate solution is treated with acidic solution, it turns milky. Explain. (IIT 2000, 05)
(b) Write the chemical reactions associated with the 'borax bead test' of cobalt(II) oxide. (IIT 2000)
(c) Draw the shape of PCl5 and BrF5 using VSEPR theory. (IIT 2003)
(d) Write structure of P4O10. (IIT 2005)

Solution. (a) (i) Argentite ore is Ag2S.
Ag2S + 4NaCN ⇌(leaching) 2Na[Ag(CN)2] + Na2S
2Na[Ag(CN)2] + Zn → Na2[Zn(CN)4] + 2Ag
(ii) A developer is usually a weak reducing agent such as potassium ferrous oxalate or an alkaline solution of pyrogallol or an alkaline solution of quinol.
K2FeII(C2O4)2 + AgBr(s) ⇌ KFeIII(C2O4)2 + Ag(s) + KBr
or hydroquinone, C6H4(OH)2 + 2AgBr(s) ⇌ quinone, O=C6H4=O + 2HBr + 2Ag(s)
Therefore, silver bromide is fixed with Na2S2O3 or developed image is made stable by fixing with Na2S2O3.
AgBr + 2Na2S2O3 → Na3[Ag(S2O3)2] + NaBr
On acidification of hypo, insoluble turbidity of colloidal sulphur (milky-white) is formed.
Na2S2O3 + 2H+ → 2Na+ + H2O + SO2↑ + S (milky white sol.)
(b) Borax is heated on loop of platinum wire to give borax bead.
Na2B4O7·10H2O →(740 °C) NaBO2 + B2O3 + 10H2O   (bead) (balanced: Na2B4O7 → 2NaBO2 + B2O3)
Cobalt(II) salts are placed on this bead and heated strongly on bunsen flame to produce blue flame.
Co(salt) →(Δ) CoO + gas↑
CoO + B2O3 →(Δ) Co(BO2)2   (blue)
Cobalt metaborate is blue in oxidising as well as reducing flame.
(c) PCl5: sp3d hybridisation having trigonal bipyramidal shape with five 3sp3d–3p bonds (P at the centre, three equatorial and two axial Cl). BrF5: sp3d2 hybridisation having distorted octahedral shape with one position occupied by the lone pair (i.e., square pyramidal) with five 4sp3d2–2p bonds.
(d) P4O10: four P atoms at the corners of a tetrahedron, six bridging O atoms along the edges (P–O–P) and one terminal P=O on each P atom (adamantane-like cage). (Book figures described, not redrawn.)

Teacher's Note: Cyanide leaching then Zn displacement; hypo dissolves unreacted AgBr; acid turns thiosulphate to colloidal sulphur.

Exam Note: Write extraction, fixing, bead test; state shapes with hybridisation.

Question 92. (B) (white fumes having pungent smell) ← (moist air) — MCl4 (M = transition element, colourless) → (A) (purple colour). Identify the metal M and hence MCl4. Explain the difference in colours of MCl4 and A. (IIT 2005)

Solution. M = Ti, (A) = [Ti(H2O)6]3+, (B) = TiO2.
Ti(+IV) ion contains no d-electrons, while d–d transition of single electron of Ti(+III) will cause colour change.

Teacher's Note: TiCl4 (d0) is colourless; Ti(III) (d1) shows d–d transition and is purple.

Exam Note: Colour needs d–d transition: d0 colourless, d1 purple.

Question 93. Identify (A) and (B) in the given sequence of reaction. Also write their IUPAC names and calculate only spin magnetic moment for B.
Fe3+(aq) →(excess of SCN−) blood-red colour (A) →(excess F−) colourless (B) (IIT 2005)

Solution. (A): Trithiocyanato ferrum (III), Fe(SCN)3
(B): Hexafluoro ferrate (III) ion, [FeF6]3−
Spin magnetic moment of B = √(n(n+2)) = √(5(5+2)) = √35 BM (≈ 5.92 BM)
[FeF6]3− has five unpaired electrons.

Teacher's Note: F− is a weak-field ligand, so Fe3+ stays d5 high spin with five unpaired electrons.

Exam Note: μ = √35 = 5.92 BM; five unpaired electrons.

Question 94. Explain the following:
(i) Ammonium salts are much more soluble than the corresponding sodium salts.
(ii) Ag(CN)2− is stable while AgCl2− is unstable.
(iii) Why do bond angles of NH3, PH3, AsH3 and SbH3 are 106.5°, 93.3°, 91.8° and 91.3°, although each show sp3 hybridisation?
(iv) Write an example of tridentate ligand.
(v) Arrange in their increasing acidic nature: Mn2O3, MnO, MnO2, MnO3, Mn2O7. Also point out strongly basic and strongly acidic oxides of Mn.

Solution. (i) NH4+ is solvated by H-bonding and ion-dipole forces whereas Na+ is solvated merely by an ion-dipole interaction. (The book shows Na+···O(H2) ion-dipole contact versus H3N+–H···O(H2) hydrogen bonding.)
(ii) Ag+ is soft acid, CN− is soft base whereas Cl− is hard base. A complex of soft acid and soft base is more stable.
(iii) Electronegativity also plays a part in the distortion of molecules from the ideal shape. With decreasing electronegativity of the central atom as in the series NH3, PH3, AsH3, SbH3 (N > P > As > Sb), the bonding electron pairs are drawn closer to H atom and further away from central atom. Thus, repulsion between bonding pairs of electrons decreases progressively and so the bond angle decreases.
(iv) CH2–CH2–NH–CH2–CH2 with NH2 groups at both ends, i.e., H2N–CH2–CH2–NH–CH2–CH2–NH2 (diethylene triamine).
(v) MnO < Mn2O3 < MnO2 < MnO3 < Mn2O7 (MnO strong basic; Mn2O3 weak basic; MnO2 amphoteric; MnO3 acidic; Mn2O7 strong acidic).

Teacher's Note: Hydrogen bonding aids NH4+ solvation; HSAB explains cyanide stability; acidity rises with Mn oxidation state.

Exam Note: Link each reason to a principle: H-bond, HSAB, electronegativity.

Question 95. (a) Interhalogen compounds AX are more reactive than halogens (except F2).
(b) What product is formed when SO2 react with ethyl magnesium bromide and the product is hydrolysed?
(c) How many sulphur atoms in polythionic acid H2SnO6 have only S–S bonds?
(d) Complete the reaction: CS2 + NaOH → ...+...+...
(e) What happens when cyanogen gas is passed through NaOH?
(f) How you will convert Na2SO4 to NaCl?

Solution. (a) A–X bond is polar; X–X bond is non-polar.
(b) O=S=O + C2H5MgBr →(ether) O=S(C2H5)–OMgBr →(HOH) O=S(C2H5)–OH   (sulphinic acid)
(c) n − 2; the acid is HO–SO2–S(n−2)–SO2–OH, so (n − 2) sulphur atoms have only S–S bonds.
(d) 3CS2 + 6NaOH → Na2CO3 + 2Na2CS3 + 3H2O
(e) (CN)2 + 2NaOH → NaCN + NaOCN + H2O; disproportionation like halogens.
(f) Na2SO4 + 4C → Na2S + 4CO; Na2S + 2HCl → 2NaCl + H2S

Teacher's Note: Polar A–X bond breaks easily; cyanogen is a pseudo-halogen and disproportionates in alkali.

Exam Note: Show Grignard route to sulphinic acid and pseudo-halogen behaviour.

Question 96. Explain why?
(i) Concentrated HNO3 acquires yellow colour on standing.
(ii) Hard water consumes more soap.
(iii) BeO reacts with acids and alkali both.
(iv) Lead pollution is caused by car exhaust.
(v) Tin vessels are not useful for packing in cold countries.

Solution. (i) NO2 formed gets dissolved in HNO3 to give brown or yellow colour.
(ii) Soaps get precipitated in presence of hard water to give Ca or Mg salts.
(iii) BeO is amphoteric in nature.
(iv) TEL used as antiknock compound in petrol comes out from exhaust as PbBr2.
(v) Tin becomes brittle at low temperature.

Teacher's Note: Each reason is short: NO2 colour, insoluble Ca/Mg soaps, amphoterism, PbBr2 exhaust, tin pest.

Exam Note: One-line reason per part; name the species.

Single Integer Answer Problems

Question 1 (Single Integer). Red lead Pb3O4 contains lead oxide and lead dioxide in the ratio ..........

Solution. Answer (from key): Two. Pb3O4 = 2PbO·PbO2, so PbO : PbO2 = 2 : 1.

Teacher's Note: Red lead is a mixed oxide, 2PbO·PbO2.

Exam Note: Write 2PbO·PbO2.

Question 2 (Single Integer). 'n' factor of O3 in the reaction I2 + 5O3 + H2O → 2HIO3 + 5O2 is ..........

Solution. Answer (from key): Two. Each O3 loses one O atom as O2 + [O], and that O gains 2 electrons (0 to −2), so n = 2.

Teacher's Note: Only one oxygen of ozone changes oxidation state, gaining 2 electrons.

Exam Note: Count electrons gained per O3.

Question 3 (Single Integer). Total number of lone pair of electrons in valence shells of oxygen atoms in ozonide O3− ion are ..........

Solution. Answer (from key): Six. O3− has 19 valence electrons; with two σ bonds and one π bond, 13 non-bonding electrons remain, giving six lone pairs and one unpaired electron.

Teacher's Note: Ozonide has 19 valence electrons and one unpaired electron; count only full pairs.

Exam Note: Draw electron count, 6 lone pairs.

Question 4 (Single Integer). Atomicity of arsenic is ..........

Solution. Answer (from key): Four. Arsenic exists as tetrahedral As4 molecules.

Teacher's Note: As4 (like P4) is tetrahedral.

Exam Note: Atomicity = 4.

Question 5 (Single Integer). Total number of H-bonding sites available in H2O are ..........

Solution. Answer (from key): Four. Each H2O has two H atoms (donors) and two lone pairs on O (acceptors): four sites.

Teacher's Note: Count two H donors plus two lone-pair acceptors.

Exam Note: 2 donor + 2 acceptor = 4.

Question 6 (Single Integer). Number of nearest neighbour NH3 molecules in solid NH3 are ..........

Solution. Answer (from key): Six. As given in the key; in solid NH3 each molecule has six nearest neighbours (three hydrogen-bonded and three more at nearly the same distance).

Teacher's Note: Solid NH3 is cubic close packed with six close neighbours.

Exam Note: State the key value 6.

Question 7 (Single Integer). Number of iron atoms involved in one molecule of ferri-ferrocyanide is ..........

Solution. Answer (from key): Seven. Ferri-ferrocyanide is Fe4[Fe(CN)6]3 (Prussian blue): 4 + 3 = 7 Fe atoms.

Teacher's Note: Prussian blue formula Fe4[Fe(CN)6]3 gives 4 outside plus 3 inside.

Exam Note: Add 4 Fe(III) and 3 Fe(II).

Question 8 (Single Integer). Number of P=O in cyclotetraphosphate ion (P4O124−) are ..........

Solution. Answer (from key): Four. Each of the four P atoms in the ring carries one P=O (and one P–O−), so there are four P=O bonds.

Teacher's Note: Ring P atoms each have two bridging O, one P=O and one P–O−.

Exam Note: One P=O per P gives 4.

Question 9 (Single Integer). Number of oxygen atoms in molybdate ion is ..........

Solution. Answer (from key): Four. Molybdate is MoO42−.

Teacher's Note: Molybdate and chromate ions are tetrahedral MO42−.

Exam Note: MoO42−: 4 O.

Question 10 (Single Integer). Oxidation number of P in peroxydiphosphoric acid (H4P2O8) is ..........

Solution. Answer (from key): Five. H4P2O8 contains one peroxo O–O (two O at −1): 4(+1) + 2x + 6(−2) + 2(−1) = 0, so x = +5.

Teacher's Note: Account for the peroxo linkage: two O are −1, not −2.

Exam Note: Solve: 4 + 2x − 12 − 2 = 0.

Question 11 (Single Integer). One mole of As2O5 on treatment with fuming hydrochloric acid gives how much mole of Cl2?

Solution. Answer (from key): Two. As2O5 + 10HCl → 2AsCl3 + 2Cl2 + 5H2O: two As(V) to As(III) take 4 electrons, i.e. 2 mol Cl2.

Teacher's Note: As(V) is reduced to As(III) by HCl, which is oxidised to Cl2.

Exam Note: Balance with electrons: 4 e give 2 Cl2.

Question 12 (Single Integer). Liquid HF shows an equilibrium at 15–19 °C: HF(l) ⇌ (HF)n(v). The value of n is ..........

Solution. Answer (from key): Six. Hydrogen fluoride vapour near its boiling point exists as hexamer (HF)6 (key value).

Teacher's Note: HF associates through strong H-bonds into zig-zag/ring polymers; hexamer in vapour.

Exam Note: State the key value 6.

Question 13 (Single Integer). Iodine iodate an ionic compound on heating decomposes to give how much mole of gases?

Solution. Answer (from key): Five. Answer as given in the key (the decomposition equation is not printed in the book).

Teacher's Note: Iodine iodate I(IO3)3 decomposes to I2 and O2 on heating.

Exam Note: Key value 5; show the products I2, O2.

Question 14 (Single Integer). Total number of gases obtained on heating ammonium iodate.

Solution. Answer (from key): Three. 4NH4IO3 → 2N2 + 2I2 + 2O2 + 8H2O; the gases counted are N2, O2 and I2 vapour (as in the key).

Teacher's Note: Count N2, O2, I2; water is not counted as a gas here.

Exam Note: Balance the decomposition, list gases.

Question 15 (Single Integer). Number of S=O bonds in cyclic trimer S3O9 are ..........

Solution. Answer (from key): Six. Each S in the ring (SO3)3 carries two S=O bonds: 3 × 2 = 6.

Teacher's Note: Cyclic (SO3)3 has three ring S and two terminal O on each S.

Exam Note: 3 S × 2 S=O = 6.

Question 16 (Single Integer). Number of canonical forms of CO2 are ..........

Solution. Answer (from key): Three. O=C=O ↔ −O–C≡O+ ↔ +O≡C–O−: three canonical forms.

Teacher's Note: Resonance of CO2 gives one neutral and two charged forms.

Exam Note: Draw all 3 canonical forms.

Question 17 (Single Integer). Number of H-bond formed in trimer form of H2O, i.e., (H2O)3 ..........

Solution. Answer (from key): Two. As given in the key (two hydrogen bonds link the three water molecules in the open-chain trimer).

Teacher's Note: An open-chain trimer of three H2O has two H-bonds; a ring would have three.

Exam Note: Count links between 3 molecules.

Question 18 (Single Integer). In medicine and first aid of shock, gas poisoning and asphyxiation a mixture of O2 and CO2 is administered in gas mask to stimulate natural respiration. The percentage of CO2 in mixture is:

Solution. Answer (from key): Five. The mixture is 95% O2 and 5% CO2 (answer in the key).

Teacher's Note: CO2 stimulates the respiratory centre; 5% in O2 is the standard carbogen-type mixture.

Exam Note: State 5% CO2.

Question 19 (Single Integer). Number of CO molecules in bridged carbonyl of iron having two iron atoms is ..........

Solution. Answer (from key): Nine. Fe2(CO)9 contains nine CO groups (six terminal and three bridging).

Teacher's Note: Fe2(CO)9 has three bridging and six terminal CO.

Exam Note: 6 terminal + 3 bridging = 9.

Question 20 (Single Integer). Number of B–O–B bonds in sodium metaborate, i.e., Na3B3O6 is ..........

Solution. Answer (from key): Three. The anion B3O63− is a six-membered ring of alternating B and O with three B–O–B links.

Teacher's Note: Ring of three B and three bridging O in cyclic metaborate.

Exam Note: Ring has three bridging O: 3.

Question 21 (Single Integer). Number of H2O molecules per molecule of bauxite in bauxite ore of Al is ..........

Solution. Answer (from key): Two. Bauxite is Al2O3·2H2O.

Teacher's Note: Bauxite formula Al2O3·2H2O.

Exam Note: Write the formula, 2 H2O.

Question 22 (Single Integer). The co-ordination number of Al in Al2Cl6 is ..........

Solution. Answer (from key): Four. In the dimer each Al is surrounded tetrahedrally by four Cl (two bridging, two terminal).

Teacher's Note: Al2Cl6 has two bridging Cl; each Al is four-coordinate.

Exam Note: Each Al: 2 terminal + 2 bridging Cl.

Question 23 (Single Integer). Oxidation number of Cu in potassium tetracyanocuprate is ..........

Solution. Answer (from key): One. K3[Cu(CN)4]: 3(+1) + x + 4(−1) = 0, so x = +1.

Teacher's Note: Tetracyanocuprate(I) is K3[Cu(CN)4], with Cu(I).

Exam Note: Charge balance gives +1.

Question 24 (Single Integer). The mole ratio of the two gases NO2 and O2 obtained on heating copper nitrate is ..........

Solution. Answer (from key): Four. 2Cu(NO3)2 → 2CuO + 4NO2 + O2; NO2 : O2 = 4 : 1.

Teacher's Note: Balanced equation fixes the ratio at 4:1.

Exam Note: Balance: 4NO2 per O2.

Question 25 (Single Integer). The co-ordination number of Be in aqueous solution of BeCl2 is ..........

Solution. Answer (from key): Four. Be2+ is hydrated as [Be(H2O)4]2+.

Teacher's Note: Be is small and has only s and p orbitals, so its maximum coordination number is 4.

Exam Note: Aqua ion [Be(H2O)4]2+.

Question 26 (Single Integer). The atomicity of Hg vapours is ..........

Solution. Answer (from key): One. Mercury vapour is monoatomic.

Teacher's Note: Hg vapour consists of single atoms.

Exam Note: Monoatomic: 1.

Question 27 (Single Integer). The atomicity of mercurous ion is ..........

Solution. Answer (from key): Two. Mercurous ion is Hg22+ (Hg–Hg bonded).

Teacher's Note: Hg2Cl2 contains the Hg22+ ion.

Exam Note: Write Hg22+; atomicity 2.

Question 28 (Single Integer). Number of unpaired electrons in [Cr(NH3)6]3+ is:

Solution. Answer (from key): Three. Cr3+ is d3, so three unpaired electrons in t2g.

Teacher's Note: d3 octahedral Cr(III) always has 3 unpaired electrons.

Exam Note: Cr3+ = 3d3.

Question 29 (Single Integer). The oxidation number of Mn in its oxide which posses strongest acidic nature is ..........

Solution. Answer (from key): Seven. Mn2O7 is the most acidic manganese oxide, with Mn in +7.

Teacher's Note: Acidity of oxides rises with oxidation state.

Exam Note: Mn2O7: +7.

Question 30 (Single Integer). In which oxidation state Mn oxide show amphoteric nature?

Solution. Answer (from key): Four. MnO2 (Mn +4) is amphoteric.

Teacher's Note: Lower oxides are basic, MnO2 amphoteric, higher oxides acidic.

Exam Note: MnO2: +4.

Question 31 (Single Integer). Number of allotropic forms of iron are ..........

Solution. Answer (from key): Three. Iron exists as α, γ and δ forms.

Teacher's Note: α-, γ- and δ-iron are the allotropes at ordinary pressure.

Exam Note: Name α, γ, δ.

Question 32 (Single Integer). Number of H2O molecules in Epsom salt is ..........

Solution. Answer (from key): Seven. Epsom salt is MgSO4·7H2O.

Teacher's Note: Epsom salt formula MgSO4·7H2O.

Exam Note: Write MgSO4·7H2O.

Question 33 (Single Integer). Number of gases given out on heating FeSO4 strongly.

Solution. Answer (from key): Two. 2FeSO4 → Fe2O3 + SO2 + SO3: two gases.

Teacher's Note: Both SO2 and SO3 are evolved.

Exam Note: Name SO2 and SO3.

Question 34 (Single Integer). Number of H2O molecules in Mohr's salt.

Solution. Answer (from key): Six. Mohr's salt is FeSO4·(NH4)2SO4·6H2O.

Teacher's Note: Mohr's salt carries six molecules of water of crystallisation.

Exam Note: Write the full formula.

Question 35 (Single Integer). Number of mole of gas given out on heating one mole of ferric sulphate.

Solution. Answer (from key): Three. Fe2(SO4)3 → Fe2O3 + 3SO3: three moles of SO3.

Teacher's Note: Ferric sulphate gives only SO3.

Exam Note: 1 mol gives 3 mol SO3.

Question 36 (Single Integer). Number of mole of SO2 formed on heating one mole of iron pyrite in air.

Solution. Answer (from key): Two. 4FeS2 + 11O2 → 2Fe2O3 + 8SO2; per mole FeS2: 2 mol SO2.

Teacher's Note: Each FeS2 has two S atoms, each giving one SO2.

Exam Note: Balance, then divide by 4.

Question 37 (Single Integer). The number of Fe3+ ions in one molecule of Prussian blue is ..........

Solution. Answer (from key): Four. Prussian blue Fe4[Fe(CN)6]3 has four Fe3+ and three Fe2+.

Teacher's Note: Outer Fe is Fe(III); the three hexacyanoferrate(II) units hold Fe(II).

Exam Note: Four outer Fe3+.

Question 38 (Single Integer). Oxidation number of Fe in sodium nitroprusside is ..........

Solution. Answer (from key): Two. Na2[Fe(CN)5NO]: 2(+1) + x + 5(−1) + (+1) = 0 with NO+, so x = +2.

Teacher's Note: Nitroprusside has NO+, which makes Fe(II).

Exam Note: Take NO as +1: x = +2.

Question 39 (Single Integer). Number of canonical forms in resonating structure of N3− is ..........

Solution. Answer (from key): Three. N3− has three resonance structures (N≡N+–N2−, N−=N+=N−, N2−–N+≡N).

Teacher's Note: Azide ion: one symmetric form and two unsymmetrical forms.

Exam Note: List the three forms.

Question 40 (Single Integer). Bond order of NO+ is ..........

Solution. Answer (from key): Three. NO+ is isoelectronic with N2 and CO (10 bonding − 4 antibonding)/2 = 3.

Teacher's Note: Isoelectronic with N2: triple bond.

Exam Note: Bond order 3 by MO count.

Question 41 (Single Integer). A species has magnetic moment 1.73 B M. The number of unpaired electron in it is ..........

Solution. Answer (from key): One. μ = √(n(n+2)) = 1.73 gives n = 1.

Teacher's Note: Spin-only formula: n = 1 gives √3 = 1.73 BM.

Exam Note: Use √(n(n+2)) = 1.73.

Question 42 (Single Integer). The bond length of H–I is 1.61 × 10−8 cm and partial charge is 3.8 × 10−7 esu cm. The percentage ionic character of HI is .......... (Assume charge on electron 4.8 × 10−10 esu)

Solution. Answer (from key): Five. The book prints this statement as shown (the dipole moment of HI is 0.38 D = 3.8 × 10−19 esu cm). % ionic character = μ/(e·d) × 100 = 3.8 × 10−19 / (4.8 × 10−10 × 1.61 × 10−8) × 100 = 4.9 ≈ 5.

Teacher's Note: Divide observed dipole by e × bond length (ideal 100% ionic dipole).

Exam Note: Show: 3.8e−19 / 7.73e−18 = 4.9% ≈ 5.

Question 43 (Single Integer). At 300 K and 1.0 atm pressure, the density of HF(v) is 3.1 g/litre. If R = 0.08, the no. of HF molecules associated in vapour phase are ..........

Solution. Answer (from key): Four. M = dRT/P = 3.1 × 0.08 × 300 / 1 = 74.4 g/mol; 74.4/20 = 3.7 ≈ 4.

Teacher's Note: Molar mass from density: M = dRT/P, then divide by 20 for HF.

Exam Note: 74.4/20 ≈ 4, so (HF)4.

Question 44 (Single Integer). No. of unpaired electrons in complex ion [CoF6]3− ..........

Solution. Answer (from key): Four. Co3+ is d6; F− is a weak-field ligand, so high spin (t2g4eg2) with four unpaired electrons.

Teacher's Note: Weak-field F− gives high spin d6, 4 unpaired.

Exam Note: d6 high spin = 4 unpaired.

Question 45 (Single Integer). Effective atomic no. of 42Mo is 54. The formula of its carbonyl is Mo(CO)x. The value of x is ..........

Solution. Answer (from key): Six. EAN = 42 + 2x = 54, so x = 6: Mo(CO)6.

Teacher's Note: Each CO donates two electrons; EAN rule gives Mo(CO)6.

Exam Note: 42 + 2x = 54, x = 6.

Question 46 (Single Integer). No. of unpaired electrons in [Mn(CN)6]3− is ..........

Solution. Answer (from key): Two. Mn3+ is d4; strong-field CN− gives low spin t2g4, so two unpaired electrons.

Teacher's Note: Strong-field cyanide pairs electrons: d4 low spin has 2.

Exam Note: d4 low spin = 2 unpaired.

Question 47 (Single Integer). Number of geometrical isomers of Co(en)Cl3Br− are ..........

Solution. Answer (from key): Two. Written as in the book; an octahedral complex of type M(AA)a3b has fac and mer geometrical isomers: two.

Teacher's Note: Type M(AA)a3b gives fac/mer pair.

Exam Note: Two geometrical isomers (fac, mer).

Question 48 (Single Integer). Number of isomers of Co(en)Cl2Br2− are ..........

Solution. Answer (from key): Four. M(AA)a2b2 has three geometrical isomers, one of which is optically active (a pair of enantiomers): four stereoisomers (as in the key).

Teacher's Note: Include the enantiomeric pair when counting isomers.

Exam Note: Three geometrical plus one extra enantiomer = 4.

Question 49 (Single Integer). No. of ions furnished by an electrolyte (2+, 3−) on dissolution in water is ..........

Solution. Answer (from key): Five. An electrolyte of formula M3A2 gives 3M2+ + 2A3−: five ions.

Teacher's Note: Cation charge 2+ and anion 3− gives formula M3A2.

Exam Note: Formula M3A2 gives 3 + 2 = 5 ions.

Question 50 (Single Integer). A sample of alloy contains a% copper (as CuAl2) by mass. If % of CuAl2 in alloy is 7.40 then what is a?

Solution. Answer (from key): Four. Cu fraction in CuAl2 = 63.5/(63.5 + 54) = 0.5404; a = 7.40 × 0.5404 = 4.0.

Teacher's Note: Mass fraction of Cu in CuAl2 times alloy percentage of CuAl2.

Exam Note: 7.40 × 63.5/117.5 = 4.0.

Question 51 (Single Integer). The number of water molecules directly bonded to metal centre in CuSO4·5H2O: [IIT 2009]

Solution. Answer (from key): Four. Four H2O are coordinated to Cu2+; the fifth is hydrogen-bonded between a coordinated water and sulphate.

Teacher's Note: The fifth water is lattice water bonded to sulphate and coordinated water.

Exam Note: Four coordinated, one H-bonded.

Question 52 (Single Integer). The coordination number of Al in the crystalline state of AlCl3 is: [IIT 2009]

Solution. Answer (from key): Six. Corrected: in solid AlCl3 (layer lattice with cubic close-packed Cl−) each Al sits in an octahedral hole, so the coordination number is 6 (the book key prints Four, which is the value in the Al2Cl6 dimer of the molten/vapour state).

Teacher's Note: Crystalline AlCl3 is ionic-layered with CN 6; the dimer with CN 4 exists in melt and vapour.

Exam Note: Crystal: 6; vapour dimer: 4.

Question 53 (Single Integer). Total number of geometrical isomers for the complex [RhCl(CO)(PPh3)(NH3)]: [IIT 2010]

Solution. Answer (from key): Three. A square planar complex of type [Mabcd] has three geometrical isomers.

Teacher's Note: Fix one ligand opposite each of the other three: three isomers.

Exam Note: Mabcd square planar gives 3.

Question 54 (Single Integer). Among the following, the number of compounds that can react with PCl5 to give POCl3 is: O2, CO2, SO2, H2O, H2SO4, P4O10 [IIT 2011]

Solution. Answer (from key): Four. SO2, H2O, H2SO4 and P4O10 react with PCl5 to give POCl3 (key value 4).

Teacher's Note: Reactions: PCl5 + H2O → POCl3 + 2HCl; P4O10 + 6PCl5 → 10POCl3.

Exam Note: Four compounds supply O to PCl5.

Question 55 (Single Integer). The numerical value of the factor effective atomic number of Mn in [Mn2(CO)10] × 1/5 is:

Solution. Answer (from key): Seven. EAN of Mn = 25 + 2(5) + 1 (Mn–Mn bond) = 36; 36 × 1/5 = 7.2, taken as 7 as in the key.

Teacher's Note: Count 25 electrons, 5 CO × 2 and one electron from the Mn–Mn bond.

Exam Note: EAN 36; 36/5 = 7.2, key gives 7.

Objective Problems (One Answer Correct)

Question 1 (Objective). Which statement about zirconium hydride is not correct?
(a) It is non stoichiometric mixture
(b) It is non stoichiometric compound
(c) It has distinct properties from those of its element
(d) It has definite composition

Solution. Answer (from key): (a). Zirconium hydride is ZrH1.9.

Teacher's Note: Zirconium hydride ZrH1.9 is a non-stoichiometric compound, not a mixture.

Exam Note: Answer (a), as in the key.

Question 2 (Objective). For the reaction PI3 + 3H2O → H3PO3 + 3HI: the correct statement is:
(a) It is intramolecular redox
(b) It is disproportional reaction
(c) It is salt hydrolysis
(d) It is double decomposition

Solution. Answer (from key): (d). The reaction is neither redox nor PI3 is a salt.

Teacher's Note: No oxidation numbers change (P +3, I −1), so it is double decomposition (hydrolysis).

Exam Note: Check oxidation numbers first.

Question 3 (Objective). Normally highest oxidation states are seen with fluorine and oxygen but OsO4 exists and OsF8 does not. This is because:
(a) the size of fluorine atom is large than oxygen atom
(b) electronegativity of F is more than oxygen atom
(c) Os cannot accomodate 8 fluorine atoms due to crowding of atoms
(d) the size of fluorine atom is smaller than oxygen atom

Solution. Answer (from key): (c). Steric hindrance prevents 8 fluorine atoms to form OsF8.

Teacher's Note: Eight F atoms are too crowded around Os; O (small, double bonded) fits four.

Exam Note: Cite steric crowding.

Question 4 (Objective). Which is a characteristic of silicones?
(a) Water repellant
(b) Weak Si–C bond
(c) Si–Si bond
(d) Less stable to heat

Solution. Answer (from key): (a). Silicones have strong Si–C bonds as well as Si–O–Si bond. These are stable to heat, insulators and water repellent.

Teacher's Note: Silicones: strong Si–C and Si–O–Si bonds, heat stable, water repellent.

Exam Note: Water repellent is the feature.

Question 5 (Objective). Which is not correct for hydroxyl amine?
(a) It disproportionates slowly in acid medium
(b) It is strong oxidant
(c) It disproportionate readily in alkaline medium
(d) It is very poisonous

Solution. Answer (from key): (b). NH2OH is strong reductant and poisonous.
4NH2OH →(2H+, slow) N2O + 2NH4+ + 3H2O
3NH2OH →(OH−, fast) N2 + NH3 + 3H2O

Teacher's Note: Hydroxylamine is mainly a reductant; its disproportionation is faster in alkali.

Exam Note: (b) is false: it is a reductant.

Question 6 (Objective). pKa of which halogen acid is positive:
(a) HF
(b) HCl
(c) HBr
(d) HI

Solution. Answer (from key): (a). pKa for HF, HCl, HBr and HI are 3, −7, −9, −10 respectively.

Teacher's Note: Only HF is a weak acid, so only its pKa is positive.

Exam Note: Quote the four pKa values.

Question 7 (Objective). During hydration of alkali metal cations:
(a) ΔG, ΔH, ΔS are −ve
(b) ΔG, ΔH are −ve, ΔS is +ve
(c) ΔG, ΔH, ΔS are +ve
(d) ΔG, ΔS are −ve, ΔH is +ve

Solution. Answer (from key): (a). Hydration is exothermic and spontaneous. Also randomness decreases.

Teacher's Note: Ions order the water around them, so entropy falls, yet ΔG is negative.

Exam Note: Exothermic, spontaneous, ΔS negative.

Question 8 (Objective). Which carbonate of alkaline earth metals decomposes on heating 373 K?
(a) BeCO3
(b) MgCO3
(c) CaCO3
(d) SrCO3

Solution. Answer (from key): (a). The decomposition temperature for Be, Mg, Ca, Sr and Ba carbonates are 373, 813, 1173, 1563 and 1633 K.

Teacher's Note: Thermal stability of carbonates rises down the group; BeCO3 is least stable.

Exam Note: BeCO3 decomposes at 373 K.

Question 9 (Objective). Which one is not an application of boron carbide?
(a) As an abrasive for polishing
(b) Possesses enormous tensile strength and used in making bullet proof cloth
(c) In brake lining of cars
(d) In paints

Solution. Answer (from key): (d). Rest all are applications of B4C.

Teacher's Note: B4C is a hard abrasive and armour/brake material, not a paint ingredient.

Exam Note: Choose the use not listed for B4C.

Question 10 (Objective). Which one is not a characteristic of R3Al?
(a) It shows sp2-hybridisation
(b) It exist as dimer
(c) It shows sp3-hybridisation
(d) Used as catalyst in the dimerisation of propene to give finally isoprene

Solution. Answer (from key): (c). Rest all are facts. (Answer as printed in the key.)

Teacher's Note: Monomeric R3Al is sp2; the key marks the sp3 option as the odd one.

Exam Note: Answer (c), as in the key.

Question 11 (Objective). Which are correct for boric oxide?
(a) It is anhydride of boric acid as well as also called sesquioxide
(b) It reacts with metal oxides forming metaborates
(c) It acts as basic oxide and reacts with strong acidic oxides to form boron salts
(d) All of the above

Solution. Answer (from key): (d). CoO + B2O3 → Co(BO2)2; B2O3 is anhydride of H3BO3; P2O5 + B2O3 → 2BPO4.

Teacher's Note: All three statements are supported by reactions; boric oxide is weakly amphoteric.

Exam Note: Quote CoO and P2O5 reactions.

Question 12 (Objective). Bi3+ and Sb3+ ions:
(a) are stable in acid medium
(b) are stable in neutral medium
(c) are stable in water
(d) slows the equilibrium Bi3+ ⇌ [BiO]+ (HCl shown over the arrow in the book)

Solution. Answer (from key): (a). Bi3+ + H2O ⇌ [BiO]+ + 2H+; the hydrolysis is suppressed in acid (HCl), so the ions are stable in acid medium.

Teacher's Note: These ions hydrolyse to BiO+/SbO+ in water; acid reverses it.

Exam Note: Acid prevents hydrolysis.

Question 13 (Objective). Which one is not correct about calgon?
(a) It is a high molar mass polymer [NaPO3]n
(b) It is a water softener
(c) It is called Graham's salt
(d) It is used as catalyst

Solution. Answer (from key): (d). Rest all are characteristics of calgon.

Teacher's Note: Calgon is sodium hexametaphosphate, a water softener, not a catalyst.

Exam Note: Calgon softens water by sequestering Ca2+.

Question 14 (Objective). About Lapis lazuli, which one is not correct?
(a) It is Na8[(AlSiO4)6]S2 and named as ultramarine
(b) It was a precious pigment for oil paintings in middle age
(c) Presence of polysulphide ion imparts blue colour to it
(d) It possesses chain silicate structure

Solution. Answer (from key): (d). Ultramarine possesses three dimensional silicate structure like Zeolites and Feldspar.

Teacher's Note: Lapis lazuli is a framework (three-dimensional) aluminosilicate, not chain silicate.

Exam Note: Framework silicate like zeolite.

Question 15 (Objective). Which of the following is not correct?
(a) P4S6 exists like P4O6
(b) In P4S3, there exists 3P–S–P bond whereas in P4S5, there exists four P–S–P bonds
(c) Both P4S10 and P4O10 have same structure
(d) P4S3 is most stable sulphide of phosphorus

Solution. Answer (from key): (a). The existence of P4S6 is not reported although P4O6 is known. (The book draws the P4S3 and P4S5 cage structures; not redrawn.)

Teacher's Note: P4S6 has never been isolated, unlike P4O6.

Exam Note: Answer (a).

Question 16 (Objective). Which of the following chromium oxide is acidic?
(a) CrO
(b) Cr2O3
(c) CrO3
(d) None of these

Solution. Answer (from key): (c). It forms H2CrO4: CrO3 + H2O → H2CrO4.

Teacher's Note: Cr(VI) oxide is acidic; CrO basic and Cr2O3 amphoteric.

Exam Note: Highest oxidation state, acidic.

Question 17 (Objective). Which of the following statements is wrong about CO?
(a) It acts as Lewis base in the formation of metal carbonyls
(b) It is a neutral oxide
(c) It acts as acid with NaOH under high P, T to give sodium formate
(d) It acts as π acceptor by accepting electrons from the central metal during complex formation

Solution. Answer (from key): (a). Answer as printed in the key: 'CO is not electron donor. See point (d).' (Note for a human check: in metal carbonyls CO is normally described as a σ-donor, with back-donation into its π* orbitals as in (d); statements (b), (c), (d) are standard.)

Teacher's Note: In carbonyls CO donates a lone pair (σ) and accepts π back-donation; the key's reasoning differs.

Exam Note: Answer (a), as in the key.

Question 18 (Objective). Cyclic trimer structure of SO3 contains:
(a) 6S=O bonds and three S–O–S bonds
(b) 3S=O bonds and six S–O–S bonds
(c) 6S=O bonds and six S–O–S bonds
(d) none of the above

Solution. Answer (from key): (a). Cyclic trimer of SO3 is (SO3)3: a six-membered ring of three S and three O atoms (three S–O–S bridges), each S carrying two S=O groups: 6 S=O and three S–O–S bonds.

Teacher's Note: Each ring S has two terminal oxygens: 3 × 2 = 6 S=O; three bridging O in the ring.

Exam Note: Count 6 S=O and 3 S–O–S.

P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 1

Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 1

Access the complete chapter-wise PDF for P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 1. These structured P Bahadur Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your JEE Exam Preparation

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.