Download JEE Chemistry P Bahadur Textbook Solutions: Chapter 19 Structure Reactions Based Problems
Explore reliable textbook solutions for Chapter 19 Structure Reactions Based Problems tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access P Bahadur Textbook Answers and Solutions
View or download the dedicated Chapter 19 Structure Reactions Based Problems solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Structure and Reactions Based Problems - Comprehension Based, Statement-Explanation and Matching Type Problems
Comprehension Based Problems
Comprehension 1
Passage: organic reactions occur by homolytic or heterolytic bond fission, inductive, electromeric and resonance effects and hyperconjugation; nucleophiles attack positive centres and electrophiles attack negative centres.
Question C1.1. Which is not formed during homolytic or heterolytic bond fission of covalent bond? (a) Free radical (b) Carbocation (c) Carbanion (d) Bridged carbocation
Solution. Answer: (d). Homolytic fission gives free radicals; heterolytic fission gives a carbocation and a carbanion. A bridged carbocation is not a direct product of bond fission.
Teacher's Note: Homolysis gives radicals; heterolysis gives ions. Bridged ions arise later by neighbouring-group participation.
Exam Note: Radicals, carbocations, carbanions only.
Question C1.2. The electromeric effect in a molecule occurs only if it has at least one: (a) σ-bond (b) lone pair (c) π-bond (d) three centred bond
Solution. Answer: (c). The electromeric effect is the complete shift of a π-electron pair to one atom in the presence of an attacking reagent, e.g. C=O → C+–O− or C=C → C+–C−, so a π-bond is essential.
Teacher's Note: Electromeric effect is a temporary shift of π electrons on attack by a reagent; sigma bonds cannot do it.
Exam Note: Needs a multiple bond (π).
Question C1.3. The most stable carbocation among the following is: (a) C6H5+ (b) C6H5CH+CH3 (c) C6H5–C+(CH3)2 (d) C6H5CH2+
Solution. Answer: (c). C6H5C+(CH3)2 is stabilised by resonance with the phenyl ring and by the +I effect (and hyperconjugation) of two methyl groups; it is tertiary and benzylic.
Teacher's Note: Benzylic plus tertiary: resonance with the ring and two methyl groups stabilise the cation most.
Exam Note: Count resonance plus alkyl groups.
Question C1.4. During nitration of an organic compound, HNO3 acts as: (a) acid (b) base (c) neutral (d) salt
Solution. Answer: (b). HNO3 + H2SO4 → NO2+ + HSO4− + H2O. HNO3 accepts a proton from the stronger acid H2SO4, so it acts as a base.
Teacher's Note: In the nitrating mixture H₂SO₄ is the acid and HNO₃ the base that gives the nitronium ion.
Exam Note: HNO₃ is the base in nitrating mixture.
Question C1.5. Dextro 2-bromobutane on treatment with NaOH(aq) will not give: (a) racemic mixture of 2-butanol if SN1 is obeyed (b) laevo form of 2-butanol if SN2 is obeyed (c) dextro form of 2-butanol if SN2 is obeyed (d) 100% inversion if SN2 is obeyed
Solution. Answer: (c). This is against the characteristics of SN2: the reaction goes with complete inversion of configuration, so the product cannot retain the dextro form; SN1 gives a racemic mixture.
Teacher's Note: S_N2 inverts configuration (back-side attack); S_N1 through a planar cation gives racemisation.
Exam Note: S_N2 means inversion, never retention.
Question C1.6. Which does not represent the simplest chiral alkane, alkene or alkyne? (a) a quaternary carbon carrying Bu, Pr, Et and Me (b) CH2=CH–CH(CH3)–C2H5 (c) HC≡C–CH(CH3)–C2H5 (d) CH3–CH(C3H7)–C2H5 (structures drawn in the book; described here in words)
Solution. Answer: (a). The simplest chiral alkane is 3-methylhexane, C2H5–CH(CH3)–C3H7; the simplest chiral alkene is 3-methylpent-1-ene and the simplest chiral alkyne is 3-methylpent-1-yne. The compound in (a) is a much larger chiral alkane, so it is not the simplest.
Teacher's Note: Simplest chiral alkane is 3-methylhexane; the compound with Bu, Pr, Et, Me on one carbon is bigger.
Exam Note: Smallest chiral compound has the fewest carbons.
Question C1.7. Which of the following is neither a nucleophile nor an electrophile? (a) NO2+ (b) Cl+ (c) CN− (d) (CH3)4N+
Solution. Answer: (d). (CH3)4N+ can neither accept an electron pair (N has no vacant orbital and carries no vacant site) nor donate one (no lone pair). NO2+ and Cl+ are electrophiles and CN− is a nucleophile.
Teacher's Note: Quaternary ammonium has no lone pair to donate and no empty orbital to accept electrons.
Exam Note: No lone pair and no vacant orbital.
Comprehension 2
Passage: tautomerism is dynamic interconversion of two isomers having different functional groups by migration of a mobile H atom, e.g. CH3CHO ⇌ CH2=CHOH.
Question C2.1. The compound cyclohex-1-en-1-ol can be distinguished from cyclohexanol by: (I) NH2OH (II) neutral FeCl3 (III) Ag(NH3)2OH (IV) Br2 water. (a) I, II, IV (b) I, III (c) II, III (d) II, IV
Solution. Answer: (a). The enol (in equilibrium with cyclohexanone) gives a positive FeCl3 test (enol form) and reacts with NH2OH (keto form), and it decolourises Br2 water through the C=C. Cyclohexanol gives none of these; Tollens reagent (III) is not used as neither gives a silver mirror.
Teacher's Note: Enol gives FeCl₃ colour and decolourises bromine; its keto form gives an oxime with NH₂OH.
Exam Note: Tests: FeCl₃, bromine water, oxime.
Question C2.2. Tautomerism is possible in: (I) cyclohexa-2,5-dienone (keto form of phenol) (II) F3C–CO–CF3 (III) CH3–CO–CH2–CO–CH3 (IV) CH3CH2NO2. (a) I, III, IV (b) I, II, III (c) I, II, IV (d) II, III, IV
Solution. Answer: (a). I (keto form of phenol) ⇌ phenol, III (keto ⇌ enol) and IV (nitro ⇌ aci-nitro form, CH3CH=NO2H) show tautomerism. F3C–CO–CF3 has no α-hydrogen, so (II) cannot.
Teacher's Note: Tautomerism needs a mobile α-hydrogen; hexafluoroacetone has none.
Exam Note: Check α-hydrogen before claiming tautomerism.
Question C2.3. The enol form of acetylacetone is stabilised by: (a) van der Waals forces (b) intermolecular H-bonding (c) intramolecular H-bonding (d) dipole–dipole repulsion
Solution. Answer: (c). In the enol form CH3–C(OH)=CH–CO–CH3 a six-membered chelate ring forms through intramolecular H-bonding between the enolic O–H and the other carbonyl oxygen.
Teacher's Note: Enolic OH bonds to the second carbonyl oxygen, closing a stable six-membered ring.
Exam Note: Chelation by intramolecular H-bond.
Question C2.4. In the reaction acetophenone (C6H5COCH3) with D+ → product, the product is: (a) C6H5–C(OH)=CH2 (b) C6H5–C(OD)=CH2 (c) the enol with OH and ring-deuterated (d) ring-deuterated enol with OD (structures drawn in the book)
Solution. Answer: (b). Acetophenone ⇌ its enol C6H5–C(OH)=CH2; with D+ the enol form exchanges its O–H and gives C6H5–C(OD)=CH2.
Teacher's Note: Enolisation lets D⁺ replace the enolic hydrogen; ring hydrogens are not involved.
Exam Note: Deuterium enters at the enol OH.
Question C2.5. The solubility of methyl acetoacetate in dilute NaOH solution is due to the formation of: (a) NaCH2·CO·CH2COOCH3 (b) CH3COCH(Na)COOCH3 written as the keto sodium salt (c) CH3–C(ONa)=CH–COOCH3 (d) CH3CO·CH2·COONa
Solution. Answer: (c). The enol form (acidic) reacts with Na or NaOH to form the sodium salt of the enol: CH3CO·CH2·COOCH3 ⇌ CH3–C(OH)=CH–COOCH3 → (NaOH) CH3–C(ONa)=CHCOOCH3.
Teacher's Note: The acidic enol, not the keto form, loses its proton to give the soluble sodium enolate.
Exam Note: Enolate formation explains solubility.
Question C2.6. 1-Hydroxyacetone is a tautomeric mixture of: (I) CH3–CO–CH2OH (II) CH3–C(OH)=CHOH (III) the epoxide-type ring form CH3–C(OH)(–O–CH2–) (IV) CH2=C(OH)–CH2OH. (a) I, III (b) I, IV (c) I, II (d) It does not show tautomerism
Solution. Answer: (a). CH3COCH2OH (open chain) ⇌ the cyclic hemiketal-type epoxide form; this is ring–chain tautomerism (as given in the book).
Teacher's Note: Ring–chain tautomerism: open hydroxy ketone and its cyclic oxirane form interconvert.
Exam Note: Book key kept; keto–enol forms II and IV also exist.
Question C2.7. Which does not represent geometrical isomers? (a) cyclopropane-1,2-dicarboxylic acid (b) HOOC–CH=CH–COOH (c) CH3CH=NOH (d) (CH3)2C=NOH
Solution. Answer: (d). Acetone oxime has two identical groups (CH3) on the carbon of C=N, so syn/anti forms are identical and there is no geometrical isomerism. The others have two different groups at each end (or the ring).
Teacher's Note: Geometrical isomerism needs two different groups on each doubly bonded atom; acetone oxime has two methyls.
Exam Note: Two identical groups kill cis–trans.
Comprehension 3
Passage: stereoisomers have the same structural formula but different spatial arrangement; geometrical isomerism is for a doubly bonded atom, optical isomerism is for a chiral centre.
Question C3.1. Select the set of incorrect statements: (a) A cis-isomer has lower b.p. than trans-isomer (b) A cis-isomer has lower m.p. than trans-isomer (c) Butan-2-ol has chiral carbon (d) 3-methyl-3-ethyloctane is simplest chiral alkane
Solution. Answer (as printed): (d). The cis-isomer is usually more polar and so has a higher b.p., while the trans-isomer packs more closely and has a higher m.p.; 3-methylhexane (not 3-methyl-3-ethyloctane) is the simplest chiral alkane. Note: statement (a) is also incorrect for the same reason, so the book key (d) is only one of the incorrect statements.
Teacher's Note: cis is more polar so higher b.p.; trans packs better so higher m.p.; smallest chiral alkane is 3-methylhexane.
Exam Note: Distinguish b.p. trend from m.p. trend.
Question C3.2. The number of stereo-centres in fumaric acid is: (a) 1 (b) 2 (c) 3 (d) 4
Solution. Answer: (b). A stereo-centre is an atom whose two groups, when interchanged, produce stereoisomers. In HOOC–CH=CH–COOH each of the two doubly bonded carbons is such a centre, so there are 2.
Teacher's Note: Each C of the C=C carries two different groups, so interchange gives cis/trans: two stereo-centres.
Exam Note: Stereo-centre is wider than chiral centre.
Question C3.3. The compound CH3(C2H5)C=CH–CH(CH3)–COOH shows: (I) geometrical isomerism (II) optical isomerism (III) stereo-isomerism (IV) none of these. (a) I, II, III (b) II (c) I (d) IV
Solution. Answer: (a). It has a C=C with different groups on each carbon (geometrical isomerism) and one chiral carbon CH(CH3)COOH (optical isomerism); both are stereo-isomerism.
Teacher's Note: C=C with unlike groups gives cis–trans; the CH(CH₃)COOH carbon is chiral.
Exam Note: Check both C=C and chiral carbon.
Question C3.4. The number of possible enantiomeric pairs that can be produced during monochlorination of 2-methylbutane is: (a) 2 (b) 3 (c) 4 (d) 1
Solution. Answer: (a). 2-Methylbutane gives four monochloro products: CH2Cl–CH(CH3)–CH2CH3 (chiral, d and l), CH3–CCl(CH3)–CH2CH3 (achiral), CH3–CH(CH3)–CHCl–CH3 (chiral, d and l) and CH3CH(CH3)CH2CH2Cl (achiral). So there are 2 enantiomeric pairs.
Teacher's Note: List all four monochlorides; only 1-chloro-2-methylbutane and 2-chloro-3-methylbutane are chiral.
Exam Note: Count chiral products, one pair each.
Question C3.5. The number of structural and configurational isomers of a bromo compound C5H9Br formed by the addition of HBr on 2-pentyne are respectively: (a) 1 and 2 (b) 2 and 4 (c) 4 and 2 (d) 2 and 1
Solution. Answer: (b). CH3C≡CCH2CH3 + HBr gives CH3–CBr=CH–CH2CH3 and CH3–CH=CBr–CH2CH3: 2 structural isomers, each having cis and trans forms, giving 4 configurational isomers.
Teacher's Note: Two positions for Br give two structures; each has cis and trans forms.
Exam Note: Structural 2, configurational 4.
Question C3.6. Total number of isomers shown by C4H8 are: (a) 3 (b) 4 (c) 5 (d) 6
Solution. Answer: (d). But-1-ene, cis-but-2-ene, trans-but-2-ene, 2-methylpropene, cyclobutane and methylcyclopropane: 6 isomers.
Teacher's Note: Include cis–trans pair and the two cycloalkanes along with three open-chain alkenes.
Exam Note: Do not forget the rings.
Comprehension 4
Passage: addition of Br2/CCl4 to alkenes is anti (via a cyclic bromonium ion); cis-alkene gives racemic and trans-alkene gives meso product.
Question C4.1. In the reaction of but-2-ene with C6H5COOOH (perbenzoic acid) followed by H3O+, A (the first product) is: (a) 2,3-epoxybutane (b) 2,3-butanediol (c) 2-butanone (d) epoxy ethane
Solution. Answer: (a). CH3CH=CHCH3 + C6H5COOOH → 2,3-epoxybutane + C6H5COOH (epoxidation). The diol arises only on later hydrolysis.
Teacher's Note: Peracid transfers one oxygen to the C=C, giving an epoxide with C₆H₅COOH as by-product.
Exam Note: Peracid gives epoxide first.
Question C4.2. In the reaction of but-2-ene with HOCl, the intermediate formed is: (a) hydroxonium ion (b) chloronium ion (c) hydronium ion (d) none of these
Solution. Answer: (b). HOCl + H+ ⇌ ClOH2+ ⇌ Cl+ + H2O; Cl+ adds to the alkene forming a cyclic chloronium ion, which water opens to give CH3CHCl–CH(OH)CH3.
Teacher's Note: Cl⁺ from protonated HOCl adds to C=C to give a bridged chloronium ion.
Exam Note: Halonium ion is the key intermediate.
Question C4.3. Trans-2-butene on reacting with Br2 in CCl4 forms mainly: (a) (±)-2,3-dibromobutane (b) (+)-2,3-dibromobutane (c) (−)-2,3-dibromobutane (d) meso-2,3-dibromobutane
Solution. Answer: (d). Br+ gives a bromonium ion and Br− attacks from the opposite face (anti addition); anti addition to the trans-alkene gives the meso product.
Teacher's Note: Anti addition to trans-but-2-ene gives meso; to cis gives racemic.
Exam Note: trans + anti addition gives meso.
Question C4.4. The product obtained in the reaction cis-CH3CH=CHCH3 + CHBr3 with (CH3)3COK is: (a) an open-chain tetrabromo compound (b) another open-chain bromo compound (c) 1,1-dibromo-2,3-dimethylcyclopropane (cis-dimethyl) (d) a bromocyclopropane with H and CH3 (structures drawn in the book)
Solution. Answer: (c). CHBr3 with (CH3)3COK gives dibromocarbene :CBr2, which adds to the C=C in one step (syn, stereospecific) to give 1,1-dibromo-cis-2,3-dimethylcyclopropane.
Teacher's Note: Base removes HBr from bromoform; dibromocarbene adds stereospecifically across the C=C.
Exam Note: Carbene addition forms a cyclopropane.
Question C4.5. The final product in cis-2-butene + OsO4, then Na2SO3/H2O is: (a) meso-2,3-butanediol (b) 2-butanol (c) (±)-2,3-butanediol (d) 2-butanone
Solution. Answer: (a). OsO4 adds syn to form the cyclic osmate, which Na2SO3/H2O hydrolyses. Syn addition of two OH groups to the cis-alkene gives meso-2,3-butanediol.
Teacher's Note: OsO₄ gives syn dihydroxylation; syn addition on a cis-alkene gives the meso diol.
Exam Note: syn + cis gives meso.
Question C4.6. (CH3)2C=C(CH3)2 on passing through 5% Br2/CCl4 which seems to be correct: (a) No colour change in Br2/CCl4 solution (b) Addition product is 2,3-dibromo-2,3-dimethylbutane (c) Colour of Br2/CCl4 is discharged (d) The reaction occurs through electrophilic addition
Solution. Corrected: The book key is (a) (it says the alkene has no olefinic H atom), but this is wrong. 2,3-Dimethylbut-2-ene is a very reactive alkene; Br2/CCl4 adds across the C=C by electrophilic addition through a bromonium ion, the colour is discharged and 2,3-dibromo-2,3-dimethylbutane is formed. Statements (b), (c) and (d) are correct; (a) is the incorrect one.
Teacher's Note: Alkene reactivity toward Br₂ rises with alkyl substitution; no vinylic H is needed for addition.
Exam Note: Addition does not need a vinylic hydrogen.
Question C4.7. Which of the following statements is correct? (1) Addition of Br2 on 2,3-dimethylbutene is free radical in presence of H2O (2) Addition of Br2 on ethene in presence of NaCl(aq) gives only 1,2-dibromoethane (3) Addition of Br2 on alkene occurs at a faster rate in presence of polar or ionising medium (4) Addition of Br2 on alkene in a vessel coated with stearic acid occurs at a faster rate than in a bottle coated with wax. (a) 1, 2 (b) 1, 2, 4 (c) 2, 3, 4 (d) 3, 4
Solution. Answer: (d). (1) is wrong (ionic, not radical); (2) is wrong, since Cl− also attacks the bromonium ion and gives BrCH2CH2Cl as well; (3) is correct because a polar medium stabilises the ionic intermediate; (4) is correct since the polar stearic-acid surface catalyses the ionic addition, while wax (non-polar) does not.
Teacher's Note: Br₂ addition is ionic: polar surfaces and solvents speed it; added chloride gives mixed halides.
Exam Note: Ionic mechanism favours polar media.
Comprehension 5
Passage: dehydration of alcohols and their reaction with HX proceed through carbocations; tertiary > secondary > primary; tert-butyl alcohol dehydrates in three steps (protonation, loss of water, loss of proton). Alcohols with a CH3CHOH– unit give the iodoform test.
Question C5.1. Why dehydration of vinyl alcohols is not difficult? (as printed; the intended meaning is "not possible") (a) Due to high enthalpy of vinylic –C–OH bond (b) Due to unstable nature of =C–OH both by tautomerism (c) Carbocation never forms in case of vinyl alcohol (d) Both (a) and (b) are correct
Solution. Answer: (d). The vinylic C–OH bond is strong (partial double-bond character), and a vinyl alcohol is unstable because it tautomerises to the carbonyl compound. These are facts, so both (a) and (b) are correct.
Teacher's Note: Vinylic C–O is strong and enols tautomerise to carbonyls, so dehydration does not occur.
Exam Note: Both reasons together.
Question C5.2. Which carbocation will not form as an intermediate? (a) (C6H5)3C+ (b) cyclohex-2-enyl cation (c) the 1-norbornyl (bridgehead) cation, bicyclo[2.2.1]heptyl+ (d) CH3–CH=CH+ type vinyl cation (as drawn)
Solution. Answer: (c). The others can form a carbocation (trityl, allylic, or vinyl under forcing conditions), but a bridgehead carbocation of a small bicyclic ring cannot become planar, so it does not form readily.
Teacher's Note: Carbocations need planarity; a small bridged bicyclic ring cannot flatten at the bridgehead.
Exam Note: Bridgehead cations are not formed.
Question C5.3. Which will give iodoform test? (a) 2-methylpropan-2-ol (b) Ethyl acetoacetate (c) 2-methylbutan-2-ol (d) 3-methylpentan-2-ol
Solution. Answer: (d). CH3–CH(OH)–CH(CH3)–CH2CH3 (3-methylpentan-2-ol) has the CH3–CH(OH)– unit responsible for the iodoform reaction.
Teacher's Note: Iodoform needs CH₃CH(OH)– or CH₃CO–; only 3-methylpentan-2-ol has it.
Exam Note: Look for CH₃CH(OH)– unit.
Question C5.4. Iodoform reaction is given by molecules having CH3–CO– unit or CH3–CHOH– unit attached to carbon or H-atom. However CH2(COR)2 and CH3·CO·CH2COOC2H5 do not give iodoform reaction because: (a) I2 reacts at active H atom (b) I2 reacts at α-methyl group (c) I2 does not react with these molecules (d) Hydrolysis of iodide substituted molecule does not occur
Solution. Answer: (a). Both groups carry reactive methylene hydrogens (H2C< between two electron-withdrawing groups); iodine substitutes there instead of at the CH3, so no CI3 unit forms: >CH2 + I2 → >CI2 → (OH−) >C(OH)2 → >C=O.
Teacher's Note: Active methylene hydrogens react with iodine first, so CI₃ is never formed.
Exam Note: Active methylene wins over CH₃.
Question C5.5. The reagent used to distinguish 1-cyclohexylethanol from 2-cyclohexylethanol is: (a) Soda lime (b) NaOI + H2O (c) Acidified KMnO4 (d) (aq.) FeCl3
Solution. Answer: (b). 1-Cyclohexylethanol has the CH3–CH(OH)– unit and gives the iodoform reaction with NaOI (I2/NaOH); 2-cyclohexylethanol does not.
Teacher's Note: Only the 1-ol has CH₃CH(OH)–, so NaOI gives yellow iodoform with it alone.
Exam Note: Iodoform test separates the two.
Question C5.6. An alcohol on iodoform reaction gives iodoform and the sodium salt of an unsaturated acid containing 3 carbon atoms. The alcohol is: (a) But-3-en-2-ol (b) Prop-2-en-2-ol (c) Pent-3-en-2-ol (d) 3-methylbut-3-en-2-ol
Solution. Answer: (a). CH2=CH–CH(OH)–CH3 →(I2) CH2=CH–CO–CH3 → CH2=CH–CO–CI3 →(NaOH) CH2=CHCOONa + CHI3. The salt is sodium acrylate (3 carbons).
Teacher's Note: Oxidise to a methyl ketone, then haloform splits off CHI₃ leaving a 3-carbon unsaturated acid salt.
Exam Note: Acid chain = carbons minus the CH₃.
Comprehension 6
Passage: aldehydes and ketones are polar; nucleophiles attack the carbonyl carbon; aldol condensation needs α-hydrogen, and aldehydes without α-H undergo Cannizzaro reaction.
Question C6.1. Which of the following undergoes aldol condensation? (a) (CH3)2CH–CHO (b) CCl3CHO (c) C6H5CHO (d) 2-chlorobenzaldehyde
Solution. Answer: (a). Only (CH3)2CHCHO has an α-hydrogen; the rest do not have α-H atoms.
Teacher's Note: Aldol condensation requires at least one α-hydrogen.
Exam Note: No α-H means no aldol.
Question C6.2. In the reaction C6H5COCH3 + A → C6H5C(CH3)=N–C(CH3)3, A is: (a) (CH3)2NH (b) (CH3)3N (c) (CH3)3C–NH2 (d) none of these
Solution. Answer: (c). A primary amine condenses with a ketone to give an imine (Schiff base): (CH3)3C–NH2 + O=C(CH3)C6H5 → (CH3)3C–N=C(CH3)C6H5.
Teacher's Note: Primary amines condense with carbonyls (–H₂O) to give C=N.
Exam Note: Imine needs RNH₂.
Question C6.3. Which one is most reactive for addition of alcohol on carbonyl group? (a) C6H5CHO (b) HCHO (c) CH3COCH3 (d) CH3CHO
Solution. Corrected: The book key is (a) with the reason that the phenyl group has a −I effect, but benzaldehyde is the least reactive aldehyde here because its ring donates electrons by resonance. Nucleophilic addition is inversely proportional to the +I effect, so formaldehyde, with no alkyl or aryl group on the carbonyl carbon and the least steric hindrance, is the most reactive. Answer: (b).
Teacher's Note: Reactivity falls with +I, +R and steric bulk; HCHO has none of these.
Exam Note: HCHO is the most reactive carbonyl.
Question C6.4. How many aldol products can form when 2-butanone and propanal react in presence of dilute base? (a) 4 (b) 5 (c) 6 (d) 7
Solution. Answer: (c). Both compounds have α-hydrogen (butanone at CH3 and CH2; propanal at CH2). Combinations: propanal enolate + propanal; propanal enolate + butanone; butanone (CH3-side) enolate + propanal; butanone (CH2-side) enolate + propanal; butanone (CH3-side) enolate + butanone; butanone (CH2-side) enolate + butanone. Total 6 (stereoisomers not counted).
Teacher's Note: Count each enolate (propanal, two from butanone) attacking each carbonyl: 3 × 2 = 6.
Exam Note: Enumerate enolate and acceptor pairs.
Question C6.5. Tautomerism is not exhibited by: (a) PhCH=CHOH (b) cyclohexa-2,5-diene-1,4-dione (p-benzoquinone) (c) cyclohexane-1,3-dione (d) cyclohexane-1,2-dione
Solution. Answer: (b). p-Benzoquinone has no α-hydrogen, so it cannot tautomerise. PhCH=CHOH ⇌ PhCH2CHO and the two cyclohexanediones ⇌ their enols.
Teacher's Note: Quinone has no α-H, so no keto–enol shift is possible.
Exam Note: No α-H, no tautomerism.
Question C6.6. The enol form of acetone after treatment with D2O gives: (a) CH3–C(OD)=CH2 (b) CD3–CO–CD3 (c) CH3–C(OH)=CH2 (d) CD2=C(OD)–CD3
Solution. Answer: (a). CH3COCH3 ⇌ CH3–C(OH)=CH2; on treatment with D2O the enolic O–H exchanges to give CH3–C(OD)=CH2 (further exchange gives the more highly deuterated forms).
Teacher's Note: The enolic OH exchanges with D₂O first, giving the O–D enol.
Exam Note: Enol OH exchanges with D₂O.
Question C6.7. Which does not undergo intermolecular Cannizzaro reaction? (a) m-chlorobenzaldehyde (b) 2-methylpropanal (c) Glyoxalic acid (d) Glyoxal
Solution. Answer (as printed): (d). Glyoxal, OHC–CHO, undergoes the Cannizzaro reaction intramolecularly (one CHO is oxidised, the other reduced, giving glycolate HOCH2COO−), while the rest show the intermolecular reaction (as per the book). Note: 2-methylpropanal has an α-hydrogen, so it would also not give an ordinary intermolecular Cannizzaro reaction.
Teacher's Note: Glyoxal shifts hydride within the same molecule; 2-methylpropanal prefers aldol because it has α-H.
Exam Note: Intra- versus intermolecular hydride shift.
Question C6.8. The product formed when furfural (2-furaldehyde) reacts with NaOH is: (I) furfuryl alcohol (II) sodium furoate (III) and (IV) esters of furan side chains. (a) I, III (b) II, III (c) III, IV (d) I, II
Solution. Answer: (d). Furfural has no α-hydrogen, so with NaOH it undergoes the Cannizzaro reaction: 2 furfural → furfuryl alcohol (I) + sodium 2-furoate (II).
Teacher's Note: No α-H in furfural, so concentrated NaOH gives alcohol plus carboxylate by disproportionation.
Exam Note: Cannizzaro gives one alcohol, one salt.
Comprehension 7
Passage: hydroxy acids behave as both acids and alcohols; on heating, α-, β- and γ-hydroxy acids give lactides, unsaturated acids or lactones; α,β-dicarboxylic acids on adjacent carbons may form an anhydride.
Question C7.1. Which are correct for citric acid? (I) It forms three series of salts (II) It is α-hydroxy acid (III) It is β-hydroxy acid (IV) On heating to 150°C it gives aconitic acid (V) It contains two –OH group. (a) I, II, IV, V (b) I, II, III, IV (c) I, II, IV (d) I, III, IV
Solution. Answer: (b). Citric acid, HOOC–CH2–C(OH)(COOH)–CH2–COOH, has three COOH groups (three series of salts) and one OH on the middle carbon, which is α to one COOH and β to the other two. On heating it loses water to give aconitic acid. Statement V is wrong (only one OH).
Teacher's Note: The central OH is α to one COOH and β to two others; heating removes water to form aconitic acid.
Exam Note: Citric acid has one OH, three COOH.
Question C7.2. α-Hydroxy acids on heating form: (a) Lactides (b) Lactones (c) Unsaturated acids (d) Either of these
Solution. Answer: (a). Two molecules of an α-hydroxy acid lose two molecules of water to form a cyclic diester, a lactide; β-hydroxy acids give unsaturated acids and γ-hydroxy acids give lactones.
Teacher's Note: α-Hydroxy acids dimerise by esterification into six-membered lactides.
Exam Note: α gives lactide, β unsaturated, γ lactone.
Question C7.3. Which one is not correct for tartaric acid? (I) It is an unsaturated acid (II) It has two –OH group and two –COOH group (III) It exists in four forms (IV) It gives pyruvic acid on heating (V) On heating it forms anhydride. (a) II, IV (b) II, III, IV (c) I, II, V (d) II, V
Solution. Corrected: The book key is (b), but II, III and IV are the correct statements about tartaric acid (two OH and two COOH; the d-, l-, meso and dl forms; pyruvic acid CH3COCOOH + CO2 + H2O on heating). The statements that are not correct are I (it is saturated) and V (it does not form an anhydride on heating). No option lists exactly I and V; option (c) I, II, V is the nearest but wrongly includes II.
Teacher's Note: Tartaric acid is saturated; heating gives pyruvic acid, not an anhydride.
Exam Note: Check each statement separately.
Question C7.4. Which of the following does not form its anhydride? (I) Maleic acid (II) Tartaric acid (III) Citric acid (IV) Fumaric acid (V) Malic acid (VI) Malonic acid. (a) II, III, IV, VI (b) II, III, IV, V (c) I, II, III, IV (d) III, IV, V, VI
Solution. Answer: (a). Only maleic acid (cis, adjacent COOH groups) forms a cyclic anhydride readily; the rest do not as per the book key: tartaric gives pyruvic acid, citric gives aconitic acid, fumaric (trans) cannot cyclise, and malonic acid decarboxylates. (Malic acid, V, is not in the book answer set even though it also does not give a simple anhydride on heating; the book key is kept.)
Teacher's Note: Cis dicarboxylic acid with adjacent COOH forms an anhydride; trans or decarboxylating acids do not.
Exam Note: Only cis geometry cyclises.
Question C7.5. Which one is not correct for fumaric and maleic acid? (a) Both are dibasic acid (b) pKa1 for maleic acid is lesser than pKa1 of fumaric acid (c) pKa2 for maleic acid is greater than pKa2 for fumaric acid (d) pKa1 of maleic acid is more than fumaric acid
Solution. Answer: (d). From the data: maleic pKa1 = 1.92, pKa2 = 6.23; fumaric pKa1 = 3.02, pKa2 = 4.38. So pKa1 of maleic (1.92) is less than that of fumaric (3.02), which makes (d) false. The maleate monoanion is stabilised by intramolecular H-bonding, which makes loss of the second proton harder (higher pKa2).
Teacher's Note: Maleic monoanion is H-bonded: stronger first acid (low pKa1) but weaker second acid (high pKa2).
Exam Note: Quote the pKa values.
Comprehension 8
Passage: aspartame is an artificial sweetener, a dipeptide methyl ester: H2N–CH(CH2COOH)–CONH–CH(CH2C6H5)–COOCH3.
Question C8.1. It contains the functional groups: (I) Amino (II) Carboxylic (III) Ester (IV) Amide (V) Benzyl. (a) I, II, III, IV, V (b) I, II, III, IV (c) I, II, III (d) I, II, IV, V
Solution. Answer: (b). Aspartame has –NH2, –COOH, –COOCH3 and –CONH– groups; benzyl is a substituent, not a functional group.
Teacher's Note: Functional groups here: amine, acid, ester, amide; benzyl is only a hydrocarbon group.
Exam Note: Benzyl is not a functional group.
Question C8.2. Its zwitter ion structure is: (a) H2N–CH(CH2COO−)–CONH–CH(CH2C6H5)–COOCH3 (b) H3N+–CH(CH2COO−)–CONH–CH(CH2C6H5)–COOCH3 (c) and (d) other protonated arrangements as drawn
Solution. Answer: (b). The free carboxylic acid proton transfers to the amino group: H3N+–CH(CH2COO−)–CONH–CH(CH2C6H5)–COOCH3, with +NH3 and –COO− in the same molecule.
Teacher's Note: COOH gives its proton to NH₂, leaving NH₃⁺ and COO⁻ in the same molecule.
Exam Note: Zwitterion has both charges.
Question C8.3. Aspartame on hydrolysis forms two amino acids: (I) aspartic acid, H2N–CH(CH2COOH)–COOH (II) phenylalanine, H2N–CH(CH2C6H5)–COOH (III) and (IV) other structures drawn in the book. (a) I, II (b) III, IV (c) I, III (d) II, IV
Solution. Answer: (a). Hydrolysis of the amide bond and the ester gives aspartic acid (I) and phenylalanine (II) (and methanol).
Teacher's Note: Breaking the peptide bond and the methyl ester releases aspartic acid, phenylalanine and methanol.
Exam Note: Hydrolyse amide and ester links.
Question C8.4. Which is correct for H2N–CH(CH2C6H5)–COOH (I) and H2N–CH(CH2COOH)–COOH (II)? (1) (I) is less hydrophobic (2) (I) is more hydrophobic (3) C6H5·CH2– is more hydrophobic than CH2COOH (4) C6H5·CH2– is less hydrophobic than CH2COOH. (a) 2, 3 (b) 1, 4 (c) 2, 4 (d) 1, 3
Solution. Answer: (a). The side chain C6H5CH2– of phenylalanine (I) is non-polar and hydrophobic, whereas the CH2COOH side chain of aspartic acid (II) is polar. So (I) is more hydrophobic (2) and C6H5CH2– is more hydrophobic than CH2COOH (3).
Teacher's Note: Hydrophobicity follows the side chain: aromatic benzyl is non-polar, carboxymethyl is polar.
Exam Note: Compare the side chains only.
Question C8.5. Aspartic acid has the structure: (a) HOOC–CH2–CH(NH2)–COOH (b) a phenylalanine-type structure with CH2C6H5 (c) HOOC–CH2–CH2–CH(NH2)–COOH (d) a quaternary form carrying CH2C6H5, COOH and NH2
Solution. Answer: (a). Aspartic acid is 2-aminobutanedioic acid, HOOC–CH2–CH(NH2)–COOH (option (c) is glutamic acid).
Teacher's Note: Aspartic acid is 2-aminobutanedioic acid; glutamic acid has one more CH₂.
Exam Note: Aspartic: 4 carbons; glutamic: 5.
Comprehension 9
Passage: arenes are benzene and its homologues; aromatic compounds obey Hückel's rule, (4n + 2) π electrons; they undergo electrophilic substitution and the orientation depends on the directive influence of the group.
Question C9.1. Side chain of a nucleus can be oxidised to –COOH group only when it has at least one: (a) Vinylic H (b) Benzylic H (c) Allylic H (d) Olefinic H
Solution. Answer: (b). The carbon of the side chain joined directly to the aromatic ring (benzylic carbon) must carry at least one H atom for oxidation to –COOH.
Teacher's Note: Benzylic C–H bond is the site of attack by oxidant; the whole side chain is cut down to COOH.
Exam Note: Needs a benzylic hydrogen.
Question C9.2. The general formula for arenes having monocyclic nature where y represents number of 6-membered rings is: (a) CnH2n−6y (b) CnH2n−8y (c) CnH2n−4y (d) CnH2n−5y
Solution. Answer: (a). For y = 1 (monocyclic arene) the formula is CnH2n−6 (e.g. benzene C6H6), so the general expression is CnH2n−6y.
Teacher's Note: Benzene C₆H₆ fits CₙH₂ₙ₋₆ at n = 6, y = 1.
Exam Note: Test the formula with benzene.
Question C9.3. Which of the following are aromatic in nature? (I) cyclopentadiene (II) cyclopentadienyl anion (III) cyclopropenyl cation (IV) benzene (V) cycloheptatriene (VI) tropylium cation. (a) II, III, IV, VI (b) I, II, III, IV (c) III, IV, V, VI (d) IV, V, VI
Solution. Answer: (a). II has 6π electrons, III has 2π electrons, IV has 6π electrons and VI has 6π electrons, all in cyclic planar conjugation, so they obey (4n+2). I has 4π electrons (and an sp3 carbon); V has 6π electrons but they are not delocalised over the whole ring because of an sp3 carbon.
Teacher's Note: Aromatic needs a planar, cyclic, fully conjugated ring with 2, 6, 10 π electrons.
Exam Note: Check planarity and (4n+2).
Question C9.4. Which of the following are m-directing groups? (I) –NH3+ (II) –NH2 in acid (III) –CCl3 (IV) –COO− (V) –NC (VI) –CN. (a) I, II, III, VI (b) IV, V, VI (c) III, IV, V (d) III, IV, VI
Solution. Answer: (a). A positive charge on the atom attached to the ring makes the group m-directing (–NH3+, and –NH2 which is protonated in acid); –CCl3 and –CN are electron withdrawing and m-directing. A negative charge (–COO−) makes a group o- and p-directing.
Teacher's Note: Positively charged or strongly electron-withdrawing groups direct meta; anionic groups direct ortho/para.
Exam Note: Charge on attached atom decides.
Question C9.5. Which of the following statements regarding SE reaction in C6H6 (C6H6 + CH3Cl/AlCl3 → toluene) is wrong? (a) AlCl3 acts as Lewis acid (b) AlCl3 acts to produce free radical (c) AlCl3 acts to produce electrophile (d) AlCl3 acts as halogen carrier
Solution. Answer: (b). AlCl3 + CH3Cl → [AlCl4]− + CH3+: it acts as a Lewis acid, halogen carrier and generates the electrophile CH3+, not a free radical.
Teacher's Note: AlCl₃ pulls Cl⁻ from CH₃Cl, giving CH₃⁺, an electrophile, not a radical.
Exam Note: Friedel–Crafts is ionic.
Question C9.6. Oxidation of which arene homologue does not produce benzoic acid with acidic KMnO4? (a) toluene (b) ethylbenzene (c) cumene (d) tert-butylbenzene
Solution. Answer: (d). The side chain in tert-butylbenzene does not have a benzylic hydrogen, so it is not oxidised; toluene, ethylbenzene and cumene all have benzylic H.
Teacher's Note: tert-Butyl carbon attached to the ring has no hydrogen, so oxidation fails.
Exam Note: No benzylic H, no oxidation.
Comprehension 10
Passage: five isomeric para-disubstituted aromatic compounds (A) to (E), molecular formula C8H8O2: (i) both A and B form a silver mirror with Tollens' reagent; B also gives a positive FeCl3 test but A does not; (ii) C gives positive iodoform test; (iii) D is readily extracted in aqueous NaHCO3 solution; (iv) E on acid hydrolysis gives 1,4-dihydroxybenzene.
Question C10.1. The compound (A) is: (I) 4-(hydroxymethyl)benzaldehyde (II) 4-methoxybenzaldehyde (III) 4-hydroxyphenylacetaldehyde (IV) 4-hydroxyacetophenone. (a) I, II, III (b) I, II, III, IV (c) I, II (d) I, IV
Solution. Answer: (c). A reduces Tollens' reagent (has –CHO) and gives no FeCl3 test (no free phenolic –OH). So A is (I) or (II): 4-HOCH2C6H4CHO or 4-CH3OC6H4CHO.
Teacher's Note: Tollens positive means CHO; FeCl₃ negative means no free phenolic OH.
Exam Note: Use each clue to eliminate options.
Question C10.2. The compound (B) is: (a) 4-(hydroxymethyl)benzaldehyde (b) 4-methoxybenzaldehyde (c) 4-hydroxyphenylacetaldehyde (d) 4-hydroxyacetophenone
Solution. Answer: (c). B has a –CHO group (reduces Tollens' reagent) and a phenolic –OH (gives violet colour with neutral FeCl3): HO–C6H4–CH2CHO.
Teacher's Note: CHO plus free phenolic OH: Tollens and FeCl₃ both positive.
Exam Note: Two clues give one structure.
Question C10.3. The compound (C) is: (a) 4-(hydroxymethyl)benzaldehyde (b) 4-methoxybenzaldehyde (c) 4-hydroxyphenylacetaldehyde (d) 4-hydroxyacetophenone
Solution. Answer: (d). C has a methyl ketone group (CH3CO–) and so gives a positive iodoform test: 4-HO–C6H4–COCH3.
Teacher's Note: Methyl ketone CH₃CO– gives yellow iodoform with NaOI.
Exam Note: Iodoform means CH₃CO– unit.
Question C10.4. The compound (D) is: (a) 4-methylbenzoic acid (b) 4-(vinyloxy)phenol (c) 4-hydroxyphenylacetaldehyde (d) 4-methoxybenzaldehyde
Solution. Answer: (a). D has a carboxylic acid group, which forms a sodium salt with aqueous NaHCO3 and is extracted: 4-CH3–C6H4–COOH.
Teacher's Note: Only a carboxylic acid is strong enough to dissolve in NaHCO₃ with effervescence.
Exam Note: NaHCO₃ solubility means COOH.
Question C10.5. The compound (E) is: (a) 4-methylbenzoic acid (b) 4-(vinyloxy)phenol, HO–C6H4–O–CH=CH2 (c) 4-hydroxyphenylacetaldehyde (d) 4-methoxybenzaldehyde
Solution. Answer: (b). E on acid hydrolysis gives 1,4-dihydroxybenzene (the vinyl ether is hydrolysed, giving CH3CHO): HO–C6H4–OCH=CH2 + H2O → HO–C6H4–OH + CH3CHO. Formula C8H8O2.
Teacher's Note: Vinyl ether hydrolyses in acid to a phenol plus acetaldehyde, giving hydroquinone.
Exam Note: Hydrolysis product fixes the structure.
Comprehension 11
Passage: Hofmann bromamide degradation converts RCONH2 to RNH2 by Br2/KOH; steps (i) amide → (ii) N-bromoamide → (iii) bromoamide anion → (iv) isocyanate → (v) carbamate anion → (vi) amine (shown for 4-chlorobenzamide). (IIT 2006)
Question C11.1. How can the conversion of (i) to (ii) be brought about? (a) KBr (b) KBr + CH3ONa (c) KBr + KOH (d) Br2 + KOH
Solution. Answer: (d). Hofmann bromamide reaction takes place with Br2 + KOH: RCONH2 → RCONHBr (N-bromination).
Teacher's Note: KOH with Br₂ generates hypobromite, which brominates the amide nitrogen.
Exam Note: Reagent is Br₂ with KOH.
Question C11.2. Which is the rate determining step in Hofmann bromamide degradation? (a) Formation of (i) (b) Formation of (ii) (c) Formation of (iii) (d) Formation of (iv)
Solution. Answer: (d). The slow step is the migration of the aryl/alkyl group from carbon to nitrogen with loss of Br−, i.e. conversion of the bromoamide anion (iii) into the isocyanate (iv).
Teacher's Note: The concerted R-migration with loss of bromide is the slowest step.
Exam Note: Rearrangement is rate determining.
Question C11.3. What are the constituent amines formed when the mixture of (i) 3-deuterobenzamide and (ii) ¹⁵N-labelled benzamide undergoes Hofmann bromamide degradation? (a) both deuterated and ¹⁵N-labelled in all combinations (b) C6H4D–NH2 and C6H5–¹⁵NH2 only (c) ¹⁵N-aniline and deuterated ¹⁵N-aniline (d) ¹⁵NHD-aniline and aniline
Solution. Answer: (b). The Hofmann rearrangement is intramolecular (the aryl group migrates within the same molecule), so there is no crossover: 3-deuterobenzamide gives 3-deuteroaniline and the ¹⁵N-benzamide gives aniline-¹⁵N.
Teacher's Note: Intramolecular migration means no crossover products between the two amides.
Exam Note: Intramolecular: labels stay together.
Comprehension 12
Passage: Riemer–Tiemann reaction introduces –CHO ortho to the –OH of phenol; p-cresol → [I] intermediate → sodium salt of 2-hydroxy-5-methylbenzaldehyde → (aq. HCl) 2-hydroxy-5-methylbenzaldehyde. (IIT 2007)
Question C12.1. Which one of the following reagents is used in the above reaction? (a) aq. NaOH + CH3Cl (b) aq. NaOH + CH2Cl2 (c) aq. NaOH + CHCl3 (d) aq. NaOH + CCl4
Solution. Answer: (c). The Riemer–Tiemann reagent is aq. NaOH + CHCl3.
Teacher's Note: Chloroform with aqueous alkali is the Reimer–Tiemann reagent.
Exam Note: CHCl₃ with NaOH.
Question C12.2. The electrophile in this reaction is: (a) :CHCl (b) CHCl3 (c) :CCl2 (d) :CCl3
Solution. Answer: (c). CHCl3 + OH− ⇌ CCl3− + H2O; CCl3− → :CCl2 + Cl−. Dichlorocarbene is the electrophile.
Teacher's Note: Base removes H⁺ from CHCl₃; loss of Cl⁻ from the anion gives electrophilic dichlorocarbene.
Exam Note: Electrophile is dichlorocarbene.
Question C12.3. The structure of the intermediate I is: (a) sodium 2-(chloromethyl)-4-methylphenoxide (b) sodium 2-(dichloromethyl)-4-methylphenoxide (c) sodium 2-(trichloromethyl)-4-methylphenoxide (d) sodium 2-(hydroxymethyl)-4-methylphenoxide
Solution. Answer: (b). The phenoxide ion attacks :CCl2 at the ortho position and then proton transfer gives the dichloromethyl intermediate, ArCHCl2 (with ONa), which is hydrolysed by alkali to the –CHO group.
Teacher's Note: Phenoxide attacks :CCl₂ at ortho; protonation gives –CHCl₂, which hydrolyses to –CHO.
Exam Note: Intermediate is ArCHCl₂.
Comprehension 13
Passage: a tertiary alcohol H on acid catalysed dehydration gives I. Ozonolysis of I gives J and K. J with KOH gives benzyl alcohol and L; K with KOH gives only M, where M = (CH3)(Ph)C=CH–CO–Ph. (IIT 2008)
Question C13.1. Compound H is formed by the reaction of: (a) PhCOCH3 + PhMgBr (b) PhCOCH3 + PhCH2MgBr (c) PhCHO + PhCH2MgBr (d) PhCHO + Ph–CH(CH3)MgBr
Solution. Answer: (b). PhCOCH3 + PhCH2MgBr → PhC(CH3)(OMgBr)CH2Ph → (H+) PhC(CH3)(OH)CH2Ph (H), a tertiary alcohol that dehydrates to PhC(CH3)=CHPh (I).
Teacher's Note: Tertiary alcohol comes from a ketone plus Grignard; only (a) and (b) are ketones, and (b) fits the ozonolysis clues.
Exam Note: Work backwards from M.
Question C13.2. The structure of I is: (a) PhC(CH3)=CHPh (as drawn in option (a)) (b) the geometrical isomer of (a) (c) PhC(CH3)=CH–CH2Ph (d) another drawn isomer
Solution. Answer: (a). Acid catalysed dehydration of PhC(CH3)(OH)CH2Ph gives the conjugated alkene PhC(CH3)=CHPh (I).
Teacher's Note: Dehydration gives the more stable alkene conjugated with both phenyl rings.
Exam Note: Saytzeff product, conjugated.
Question C13.3. The structures of compounds J, K and L, respectively, are: (a) PhCOCH3, PhCH2COCH3 and PhCH2COO−K+ (b) PhCHO, PhCH2CHO and PhCOO−K+ (c) PhCOCH3, PhCH2CHO and CH3COO−K+ (d) PhCHO, PhCOCH3 and PhCOO−K+
Solution. Answer: (d). Ozonolysis of PhC(CH3)=CHPh gives PhCOCH3 (K) and PhCHO (J). J undergoes Cannizzaro reaction: 2PhCHO + KOH → PhCH2OH + PhCOO−K+ (L). K undergoes aldol condensation with itself to give M.
Teacher's Note: Ozonolysis splits C=C into PhCHO (Cannizzaro with KOH) and PhCOCH₃ (aldol).
Exam Note: Match each product to its KOH reaction.
Comprehension 14
Passage: Hex-3-ynal (CH3CH2C≡C–CH2CHO) is converted by 1. NaBH4 2. PBr3 into I; I with 1. Mg/ether 2. CO2 3. H3O+ gives J; J with K gives the acid chloride CH3CH2C≡C–CH2CH2COCl, which with H2/Pd–BaSO4/quinoline gives L. (IIT 2008)
Question C14.1. The structure of the product I is: (a) trans-alkenyl bromide (b) cis-alkenyl bromide (c) another alkenyl bromide (d) CH3CH2–C≡C–CH2–CH2Br
Solution. Answer: (d). NaBH4 reduces –CHO to –CH2OH and PBr3 converts the alcohol to the bromide: CH3CH2C≡C–CH2CH2Br (I). The triple bond is untouched.
Teacher's Note: NaBH₄ reduces CHO only; PBr₃ replaces OH by Br; the alkyne stays.
Exam Note: Alkyne survives NaBH₄ and PBr₃.
Question C14.2. The structure of compounds J and K, respectively, are: (a) CH3CH2C≡C–CH2CH2–COOH and SOCl2 (b) hydroxy-unsaturated acid and SO2Cl2 (c) CH3CH2C≡C–CH2CH2–COOH and SOCl2 as drawn in (c) (d) acid and CH3SO2Cl
Solution. Answer: (c). Grignard formation then CO2 and H3O+ extends the chain by one carbon: J = CH3CH2C≡C–CH2CH2–COOH. SOCl2 (K) then converts the acid into the acid chloride.
Teacher's Note: RMgBr + CO₂ gives RCOOH; SOCl₂ converts COOH to COCl.
Exam Note: Grignard + CO₂ adds one carbon.
Question C14.3. The structure of product L is: (a) cis-alkenal drawn in (a) (b) saturated aldehyde (c) CH3CH2CH=CH–CH2CH2CHO (cis) (d) trans-alkenal
Solution. Answer: (c). H2 with Pd/BaSO4/quinoline (Rosenmund conditions; also a Lindlar-type poison) reduces –COCl to –CHO and also adds H2 to the alkyne with syn addition to give the cis-alkene: cis-hept-4-enal.
Teacher's Note: Poisoned Pd gives the aldehyde from acid chloride and cis-alkene from the alkyne (syn addition).
Exam Note: Poisoned Pd stops at cis alkene.
Comprehension 15
Passage: carbonyl compound P (gives positive iodoform test) reacts with MeMgBr, then dehydration gives olefin Q; ozonolysis of Q gives dicarbonyl R, which undergoes intramolecular aldol reaction to give S. P → (1. MeMgBr 2. H+, H2O 3. H2SO4, Δ) Q → (1. O3 2. Zn, H2O) R → (1. OH− 2. Δ) S. (IIT 2009)
Question C15.1. The structure of the carbonyl compound P is: (a)–(d) four phenyl-substituted enones/ketones drawn in the book
Solution. Answer: (b). P is 3-methyl-4-phenylbut-3-en-2-one, C6H5CH=C(CH3)–CO–CH3. It has the CH3CO– group (iodoform positive); CH3MgBr gives C6H5CH=C(CH3)–C(OH)(CH3)2.
Teacher's Note: Methyl ketone for iodoform; the Grignard adds a methyl; the later steps need an arylidene C=C.
Exam Note: Work forward and check ring closure.
Question C15.2. The structure of the products Q and R, respectively, are: (a) Q = 1,1,2-trimethylindene, R = o-OHC–C6H4–C(CH3)2–COCH3 (b), (c), (d) other Q/R pairs drawn in the book
Solution. Answer: (a). The tertiary alcohol C6H5CH=C(CH3)–C(OH)(CH3)2 on H2SO4 loses water giving the tertiary cation, which cyclises onto the ring (intramolecular alkylation) to give Q = 1,1,2-trimethylindene. Ozonolysis of the ring C=C gives R = o-OHC–C6H4–C(CH3)2–CO–CH3.
Teacher's Note: Cation cyclises onto the ring to form an indene; ozonolysis opens the five-membered C=C to CHO and COCH₃.
Exam Note: Cyclise first, then ozonolyse.
Question C15.3. The structure of the product S is: (a) 4-methyl-naphthalenone (b) 2,2-dimethylnaphthalen-1(2H)-one (c) 4,4-dimethylnaphthalen-1(4H)-one (d) 2-methyl-naphthalenone
Solution. Answer: (b). In R only the CH3 of COCH3 has α-hydrogen (the other α-carbon is quaternary). Its enolate attacks the CHO intramolecularly, forming a six-membered ring; dehydration gives the enone: 2,2-dimethylnaphthalen-1(2H)-one (C=O next to the CMe2 carbon).
Teacher's Note: Only the acetyl CH₃ can form an enolate; attack on CHO closes a six-membered ring, then –H₂O.
Exam Note: Choose the ring size that forms.
Comprehension 16
Passage: two aliphatic aldehydes P and Q react in the presence of aqueous K2CO3 to give compound R, which upon treatment with HCN provides compound S. On acidification and heating, S gives the lactone shown (α-hydroxy-β,β-dimethyl-γ-butyrolactone). (IIT 2010)
Question C16.1. The compounds P and Q respectively are: (a) (CH3)2CH–CHO and CH3CHO (b) (CH3)2CH–CHO and HCHO (c) and (d) two other C5 aldehydes paired with CH3CHO and HCHO as drawn in the book
Solution. Answer: (b). Crossed aldol of isobutyraldehyde (P, one α-H) with formaldehyde (Q, no α-H) gives R. The lactone skeleton with a gem-dimethyl carbon and CH2O fits these two aldehydes.
Teacher's Note: HCHO has no α-H and is the acceptor; isobutyraldehyde (one α-H) is the donor.
Exam Note: Crossed aldol: one partner without α-H.
Question C16.2. The compound R is: (a) (CH3)2C(CH2OH)–CHO (b) (CH3)2C(CHOHCH3)–CHO (c)–(d) longer chain hydroxy aldehydes drawn in the book
Solution. Answer: (a). (CH3)2CH–CHO + HCHO →(K2CO3) HOCH2–C(CH3)2–CHO (3-hydroxy-2,2-dimethylpropanal).
Teacher's Note: Enolate of isobutyraldehyde attacks HCHO; the aldol cannot dehydrate as it has no α-H left.
Exam Note: Aldol product stays hydroxy aldehyde.
Question C16.3. The compound S is: (a), (b) aldehyde-nitriles with a CH2CN group, (c) a cyanohydrin diol with CH2OH on the chain, (d) HOCH2–C(CH3)2–CH(OH)–CN (all as drawn in the book)
Solution. Answer: (d). R + HCN gives the cyanohydrin HOCH2–C(CH3)2–CH(OH)CN (S). Acidic hydrolysis gives HOCH2C(CH3)2CH(OH)COOH, which on heating lactonises to the α-hydroxy-β,β-dimethyl-γ-butyrolactone.
Teacher's Note: HCN adds to the CHO to form a cyanohydrin, whose nitrile hydrolyses to acid and then lactonises.
Exam Note: Cyanohydrin then hydrolysis then lactone.
Comprehension 17
Passage: an acyclic hydrocarbon P, C6H10, gave acetone as the only organic product through the sequence: P → (i) dil. H2SO4/HgSO4 (ii) NaBH4/ethanol (iii) dil. acid → Q → (i) conc. H2SO4 (catalytic amount) (−H2O) (ii) O3 (iii) Zn/H2O → 2 CH3COCH3. (IIT 2011)
Question C17.1. The structure of compound P is: (a) CH3CH2CH2CH2–C≡C–H (b) CH3CH2–C≡C–CH2CH3 (c) (CH3)2CH–C≡C–CH3 (d) (CH3)3C–C≡C–H
Solution. Answer: (d). P = (CH3)3C–C≡CH (3,3-dimethylbut-1-yne, C6H10). Hydration (Kucherov) gives (CH3)3C–CO–CH3; NaBH4 then gives (CH3)3C–CH(OH)CH3 (Q); acid dehydration with a methyl shift gives (CH3)2C=C(CH3)2, whose ozonolysis gives 2 acetone.
Teacher's Note: Acetone from both halves of the final alkene points to tetramethylethylene via a methyl shift.
Exam Note: Work backwards from acetone.
Question C17.2. The structure of the compound Q is: (a) (CH3)2CH–C(OH)(CH3)–CH2CH3 (b) (CH3)3C–CH(OH)–CH3 (c) (CH3)2CH–CH2–CH(OH)CH3 (d) CH3CH2CH2CH(OH)CH2CH3
Solution. Answer: (b). Q = 3,3-dimethylbutan-2-ol, (CH3)3C–CH(OH)–CH3. On acid, the secondary cation formed undergoes a 1,2-methyl shift to the tertiary cation (CH3)2C+–CH(CH3)2, which loses H+ to give (CH3)2C=C(CH3)2.
Teacher's Note: Reduction of pinacolone gives the alcohol; its cation rearranges by methyl shift to a tertiary cation.
Exam Note: Methyl shift gives tertiary cation.
Comprehension 18
Passage: I → ((CH3CO)2O/CH3COONa) J → (i) H2, Pd/C (ii) SOCl2 (iii) anhydrous AlCl3 → K. J (C9H8O2) gives effervescence on treatment with NaHCO3 and a positive Baeyer's test. (IIT 2012)
Question C18.1. The compound I is: (a) benzaldehyde (b) benzyl alcohol (c) acetophenone (d) styrene
Solution. Answer: (a). I = C6H5CHO. Perkin condensation with (CH3CO)2O/CH3COONa gives J = cinnamic acid C6H5CH=CHCOOH (effervescence with NaHCO3 because of COOH; Baeyer's test positive because of C=C).
Teacher's Note: Acetic anhydride with sodium acetate is the Perkin reaction, which needs an aromatic aldehyde.
Exam Note: Perkin gives cinnamic acid.
Question C18.2. The compound K is: (a) indane (b) a chromanone lactone (c) 1-indanone (d) 2-indanone
Solution. Answer: (c). Cinnamic acid + H2/Pd–C gives 3-phenylpropanoic acid; SOCl2 gives the acid chloride; AlCl3 causes intramolecular Friedel–Crafts acylation to give 1-indanone (K).
Teacher's Note: Hydrogenation, acid chloride, then intramolecular acylation closes a five-membered ketone ring.
Exam Note: Acylation closes the ring.
Comprehension 19
Passage: P and Q are isomers of dicarboxylic acid C4H4O4. Both decolourise Br2/H2O. On heating, P forms the cyclic anhydride. Upon treatment with dilute alkaline KMnO4, P as well as Q could produce one or more than one from S, T and U, where S is meso-tartaric acid and T, U are the two optically active (d and l) tartaric acids. (JEE Advanced II 2013)
Question C19.1. In the following reaction sequences V and W are, respectively: Q →(H2/Ni, Δ) V; benzene + V →(AlCl3, anhydrous) → (i) Zn–Hg/HCl (ii) H3PO4 → W. (a) succinic anhydride and 1-tetralone (b) butane-1,4-diol and naphthalene (c) succinic anhydride and tetralin (d) butane-1,4-diol and a phenylbutenol
Solution. Answer: (a). C4H4O4 is HOOC–CH=CH–COOH; P (forms anhydride) is maleic acid and Q is fumaric acid. Q + H2/Ni gives succinic acid, which on heating gives succinic anhydride (V). Benzene + succinic anhydride/AlCl3 gives 4-oxo-4-phenylbutanoic acid; Zn–Hg/HCl gives 4-phenylbutanoic acid; H3PO4 cyclises it to 1-tetralone (W).
Teacher's Note: Isomer forming anhydride is maleic; Friedel–Crafts, Clemmensen and cyclisation make tetralone.
Exam Note: Haworth synthesis of tetralone.
Question C19.2. Compounds formed from P and Q, respectively, are: (a) Optically active S and optically active pair (T, U) (b) Optically inactive S and optically inactive pair (T, U) (c) Optically active pair (T, U) and optically active S (d) Optically inactive pair (T, U) and optically inactive S
Solution. Answer: (b). Dilute alkaline KMnO4 adds two OH groups syn. Maleic acid (P) gives meso-tartaric acid S, optically inactive (internal compensation). Fumaric acid (Q) gives the racemic mixture of T and U (d and l), optically inactive by external compensation.
Teacher's Note: Syn hydroxylation: cis acid gives meso; trans acid gives a racemic pair.
Exam Note: Both products are optically inactive.
Comprehension 20
Passage: Schemes 1 and 2 describe sequential transformations of alkynes M and N. Scheme-1: M = HOCH2CH2C≡CH → 1. NaNH2 (excess) 2. CH3CH2I (1 equivalent) 3. CH3I (1 equivalent) 4. H2, Lindlar's catalyst → X. Scheme-2: N = CH3CH2C≡CH → 1. NaNH2 (2 equivalents)... alkylation with the C3 reagent drawn in the book → 3. H3O+ (mild) 4. H2, Pd/C 5. CrO3 → Y. (JEE Advanced II 2014)
Question C20.1. The product X is: (a) cis-CH3OCH2CH2CH=CHCH2CH3 (b) the trans isomer of (a) (c) ethoxy cis alkene (d) ethoxy trans alkene
Solution. Answer: (a). With excess NaNH2, M gives the dianion O−CH2CH2C≡C−. The carbanion is alkylated by CH3CH2I (the carbanion is more nucleophilic) and then the alkoxide is methylated by CH3I to give CH3OCH2CH2C≡CCH2CH3; Lindlar hydrogenation gives the cis alkene X (C7H14O).
Teacher's Note: Acetylide alkylates first with ethyl; alkoxide takes methyl; Lindlar stops at cis-alkene.
Exam Note: Lindlar catalyst gives cis.
Question C20.2. The correct statement with respect to product Y is: (a) It gives a positive Tollens test and is a functional isomer of X (b) It gives a positive Tollens test and is a geometrical isomer of X (c) It gives a positive iodoform test and is a functional isomer of X (d) It gives a positive iodoform test and is a geometrical isomer of X
Solution. Answer: (c). In Scheme-2 the acetylide is alkylated by a C3 hydroxy-bearing reagent to give a secondary alcohol, CH3CH2C≡C–CH2CH(OH)CH3; H2/Pd–C gives heptan-2-ol and CrO3 gives heptan-2-one, CH3CO(CH2)4CH3 (Y, C7H14O). It is a methyl ketone (positive iodoform) and a functional isomer (ketone) of the ether X (C7H14O); it is a ketone, so no Tollens test.
Teacher's Note: Y is a methyl ketone (iodoform) with the same formula C₇H₁₄O as the ether X.
Exam Note: Same formula, different functional group.
Comprehension 21
Passage: C8H6 (phenylacetylene) →(H2, Pd–BaSO4) C8H8 → (i) B2H6 (ii) H2O2, NaOH, H2O → X; C8H6 →(H2O, HgSO4, H2SO4) C8H8O → (i) EtMgBr, H2O (ii) H+, heat → Y. (JEE Advanced II 2015)
Question C21.1. Compound X is: (a) acetophenone (b) 1-phenylethanol (c) 2-phenylethanol (d) phenylacetaldehyde
Solution. Answer: (c). C6H5C≡CH + H2/Pd–BaSO4 gives styrene; hydroboration–oxidation adds H and OH in anti-Markovnikov fashion to give C6H5CH2CH2OH (X).
Teacher's Note: Poisoned Pd stops at styrene; B₂H₆ then H₂O₂/OH⁻ gives the anti-Markovnikov alcohol.
Exam Note: Hydroboration is anti-Markovnikov.
Question C21.2. The major compound Y is: (a) C6H5CH2CH=CHCH3 type (b) C6H5CH=CHCH2CH3 (c) C6H5C(=CH2)CH2CH3 (d) C6H5C(CH3)=CHCH3
Solution. Answer: (d). Kucherov hydration gives acetophenone; EtMgBr gives the tertiary alcohol C6H5C(OH)(CH3)CH2CH3; acid dehydration (Saytzeff) gives the conjugated, more substituted alkene C6H5C(CH3)=CHCH3 (Y).
Teacher's Note: Hydration gives a methyl ketone; Grignard gives a tertiary alcohol; dehydration gives the most substituted conjugated alkene.
Exam Note: Saytzeff: most substituted alkene.
Comprehension 22
Passage: treatment of compound O (1,2-diethylbenzene) with KMnO4/H+ gave P, which on heating with ammonia gave Q. Q on treatment with Br2/NaOH produced R. On strong heating, Q gave S, which on further treatment with ethyl 2-bromopropanoate in the presence of KOH followed by acidification, gave a compound T. (JEE Advanced II 2016)
Question C22.1. The compound R is: (a) o-phenylenediamine (benzene-1,2-diamine) (b) phthaloyl dibromide (c) the N,N'-dibromo diamide (d) N-bromophthalimide
Solution. Answer: (a). O = 1,2-diethylbenzene → (KMnO4/H+) phthalic acid (P) → (NH3, Δ) phthalamide (Q) → (Br2/NaOH, Hofmann bromamide) benzene-1,2-diamine (R).
Teacher's Note: Hofmann degradation removes CO from each CONH₂ and leaves NH₂ on the ring.
Exam Note: Hofmann: –CONH₂ becomes –NH₂.
Question C22.2. The compound T is: (a) glycine (b) alanine (c) valine (d) serine
Solution. Answer: (b). Q on strong heating gives phthalimide (S). Its potassium salt (KOH) is alkylated by CH3CHBrCOOC2H5 (Gabriel synthesis); hydrolysis with H3O+ gives CH3CH(NH2)COOH, alanine (T).
Teacher's Note: Gabriel synthesis with α-bromo ester gives the α-amino acid: alanine from 2-bromopropanoate.
Exam Note: Gabriel synthesis makes primary amino acid.
Comprehension 23
Passage: reaction of P, 4-(tert-butyl)phenyl-CH2CH2CO2Et, with excess CH3MgBr in (C2H5)2O followed by H2O gives Q. Q with H2SO4 at 0°C gives R. R with CH3COCl/anhydrous AlCl3 in CH2Cl2, then H2O, produces S. (JEE Advanced II 2017)
Question C23.1. The reactions, Q to R and R to S, are: (a) Dehydration and Friedel–Crafts acylation (b) Friedel–Crafts alkylation, dehydration and Friedel–Crafts acylation (c) Aromatic sulfonation and Friedel–Crafts acylation (d) Friedel–Crafts alkylation and Friedel–Crafts acylation
Solution. Answer (as printed): (b). Excess CH3MgBr converts the ester to the tertiary alcohol Q, ArCH2CH2C(OH)(CH3)2. H2SO4 protonates the OH, water is lost (dehydration) to give the tertiary cation, which attacks the ring (intramolecular Friedel–Crafts alkylation) to form R, 6-tert-butyl-1,1-dimethylindane. R then undergoes Friedel–Crafts acylation with CH3COCl/AlCl3.
Teacher's Note: Grignard gives a tertiary alcohol; acid dehydration, then ring alkylation; finally acylation.
Exam Note: Name every step in order.
Question C23.2. The product S is: (A) a sulfonic acid derivative (B) an acetyl-substituted open-chain ketone (C) an indene derivative (D) 4-acetyl-1,1-dimethyl-6-tert-butylindane
Solution. Answer: (d). S is the acylated indane, with COCH3 on the ring at C-4 (next to the ring-fusion carbon of the CH2 side, meta to the tert-butyl group), C(CH3)3 at C-6 and the gem-dimethyl five-membered ring intact: 4-acetyl-6-tert-butyl-1,1-dimethylindane.
Teacher's Note: Acylation enters on the aromatic ring of the indane; the saturated five-membered ring stays.
Exam Note: Acyl group goes on the ring.
Statement–Explanation (Assertion–Reason) Problems
Instructions: in each sub-question a statement S and an explanation E are given. Choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong. (b) S is wrong but E is correct. (c) Both S and E are correct and E is the correct explanation of S. (d) Both S and E are correct but E is not the correct explanation of S.
Question AR1. S: Solubility of n-alcohol in water decreases with increase in molar mass.
E: The hydrophobic nature of alkyl chain increases.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Solubility of alcohols in water is due to H-bonding. As the molar mass increases, the hydrophobic alkyl part grows and solubility falls.
Teacher's Note: Water solubility comes from OH H-bonding; a longer alkyl chain adds hydrophobic bulk.
Exam Note: Hydrophobic chain lowers solubility.
Question AR2. S: The yield in organic reactions is 100%.
E: The organic reactions take place along with side reactions.
Solution. Answer: (b) (S is wrong but E is correct). The yield of organic reactions is not 100% because they take place along with side reactions.
Teacher's Note: Side reactions and incomplete conversion keep practical yield below 100%.
Exam Note: Side reactions lower yield.
Question AR3. S: Ethane is much less reactive than ethene.
E: Bond angles in ethane are less than those in ethene.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). Ethene is more reactive than ethane because of the π-bond. Bond angles (109.5° in ethane, about 120° in ethene) are correctly stated but do not explain the reactivity.
Teacher's Note: Ethene reacts through its exposed, weaker π bond; bond angles are unrelated to this.
Exam Note: True but not explanatory: π bond.
Question AR4. S: 2,3-Dimethylbut-2-ene decolourises Br2 water.
E: 2,3-Dimethylbut-2-ene is an unsaturated compound.
Solution. Corrected: The book key is (b) (it says the alkene has no olefinic H atom), which is wrong. (CH3)2C=C(CH3)2 is an alkene (unsaturated) and adds Br2 readily, so it decolourises Br2 water; being unsaturated is the reason. Both S and E are correct and E explains S, so the answer is (c).
Teacher's Note: Any C=C, however substituted, adds Br₂ and decolourises bromine water.
Exam Note: Unsaturation explains decolourisation.
Question AR5. S: C6H6 does not decolourise Br2 water.
E: All the six carbon atoms have delocalised π-electrons.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Benzene does not decolourise bromine water because of resonance stabilisation due to delocalisation of π-electrons.
Teacher's Note: Delocalised π electrons make benzene unreactive to addition; bromine water stays coloured.
Exam Note: Delocalisation gives aromatic stability.
Question AR6. S: C6H5Cl on treating with NaOH does not show replacement of Cl atom by OH.
E: The resonance in chlorobenzene stabilises the molecule.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The C–Cl bond acquires partial double-bond character by resonance, so it is not easily broken under ordinary conditions; the explanation is the correct reason.
Teacher's Note: Lone pair of Cl delocalises into the ring, strengthening the C–Cl bond.
Exam Note: Resonance gives C–Cl double-bond character.
Question AR7. S: Nitrobenzoic acid is more acidic than benzoic acid.
E: Presence of electron repelling group decreases acidic character in molecule.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). The presence of an electron-attracting group (here –NO2) increases the acidic character of benzoic acid. E is a true general statement, but it is not the reason for S.
Teacher's Note: NO₂ withdraws electrons and stabilises the benzoate; the reason is electron attraction, not repulsion.
Exam Note: EWG raises acidity.
Question AR8. S: p-Dimethoxybenzene is polar.
E: The different orientations of methoxy group in ring result in producing dipole.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). p-Dimethoxybenzene is polar because of different orientations of the two methoxy groups, which do not cancel (the C–O–CH3 bonds are bent).
Teacher's Note: Bent C–O–CH₃ groups can orient so their dipoles do not cancel completely.
Exam Note: Non-cancelling dipoles.
Question AR9. S: H atoms of ethyne are acidic in nature.
E: The sp-hybridisation of carbon atoms makes C atoms more electronegative.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Ethyne is acidic because sp carbon, with 50% s-character, is more electronegative, so the C–H electrons are held tightly and the proton is easily lost.
Teacher's Note: 50% s-character holds the C–H pair close to carbon, making H acidic.
Exam Note: sp carbon is more electronegative.
Question AR10. S: Acetate ion is more basic than formate ion.
E: The +I effect of the methyl group intensifies electron density on oxygen atom.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The +I effect of CH3 increases the negative charge on oxygen in CH3COO−, making it more basic than HCOO−.
Teacher's Note: Methyl pushes electrons onto oxygen, so acetate holds a proton more strongly.
Exam Note: +I raises basicity.
Question AR11. S: C2H5I is more reactive than C2H5Cl.
E: I being less electronegative than Cl.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). C2H5I is more reactive due to lower bond energy of the C–I bond than the C–Cl bond. E is true but the real reason is bond strength.
Teacher's Note: C–I is longer and weaker than C–Cl, so iodide leaves more easily.
Exam Note: Bond strength decides reactivity.
Question AR12. S: 1-Butene on reaction with HBr in the presence of peroxide produces 1-bromobutane.
E: It involves the formation of primary radical.
Solution. Answer: (a) (S is correct but E is wrong). Addition of HBr in presence of peroxide takes place through a free-radical mechanism (anti-Markovnikov), so S is correct. But the radical formed is the more stable secondary radical CH3CH2CH•CH2Br, not a primary one.
Teacher's Note: Br• adds to the terminal carbon to give the more stable secondary radical.
Exam Note: Radical is secondary, not primary.
Question AR13. S: Phenol is more reactive than benzene towards electrophilic substitution reaction.
E: In the case of phenol, the intermediate carbocation is more resonance stabilised.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The –OH group is o- and p-directing and activating; the lone pair on oxygen gives additional resonance structures, so the arenium ion formed on attack by E+ is more stabilised.
Teacher's Note: OH lone pair delocalises into the ring and stabilises the arenium ion.
Exam Note: +M effect of OH activates.
Question AR14. S: Ethyl acetoacetate gives reddish violet colour with FeCl3(aq).
E: Ethyl acetoacetate shows keto–enol isomerism.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The enol form CH3–C(OH)=CH–COOC2H5 gives the characteristic colour with FeCl3(aq); this is why the keto–enol tautomerism is the correct reason.
Teacher's Note: The enol form carries an OH on a C=C, which complexes with Fe³⁺ to give colour.
Exam Note: Enol form gives FeCl₃ test.
Question AR15. S: Acetate ion is more basic than methoxide ion.
E: Acetate ion is resonance stabilised.
Solution. Answer: (b) (S is wrong but E is correct). CH3OH is less acidic than CH3COOH; thus CH3COO− (resonance stabilised, weaker base) is less basic than CH3O−. Stronger acid has the weaker conjugate base. So S is wrong and E is correct.
Teacher's Note: Acetic acid is the stronger acid, so acetate is the weaker base than methoxide.
Exam Note: Strong acid gives weak conjugate base.
Question AR16. S: The unpaired electron of CH3 free radical occupies p-orbital.
E: CH3• possesses sp2 hybridisation.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The methyl radical is planar with sp2 carbon; three sp2 orbitals form the C–H bonds and the unpaired electron lies in the unhybridised p orbital. The explanation is the correct reason.
Teacher's Note: Planar CH₃ radical: three sp² C–H bonds and the odd electron in a p orbital.
Exam Note: sp² carbon leaves a p orbital.
Question AR17. S: Acetic acid does not undergo haloform reaction.
E: Acetic acid has no α-hydrogen.
Solution. Answer: (a) (S is correct but E is wrong). Compounds having a CH3–CO– unit attached to C or H show the haloform reaction, and CH3COOH does not give it (S is correct). But acetic acid does have three α-hydrogen atoms (E is wrong); the reason is that the carbonyl is part of a COOH group, not a ketone or aldehyde.
Teacher's Note: Acetic acid has α-hydrogens; it fails the test because its carbonyl is not aldehyde/ketone.
Exam Note: E is false: α-H present.
Question AR18. S: Benzonitrile is prepared by the reaction of chlorobenzene with potassium cyanide.
E: Cyanide (CN−) is a strong nucleophile.
Solution. Answer: (b) (S is wrong but E is correct). No doubt CN− is a stronger nucleophile than Cl−, but the chlorine atom in chlorobenzene is firmly attached to the ring due to resonance, so it is not replaced; benzonitrile is made from the diazonium salt (Sandmeyer).
Teacher's Note: Aryl chlorides resist nucleophilic substitution; use the diazonium route instead.
Exam Note: Aryl halides do not react with KCN.
Question AR19. S: Addition of Br2 to 1-butene gives two optical isomers.
E: The product contains one asymmetric carbon atom.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). CH3CH2CH=CH2 + Br2 → CH3CH2C*HBr–CH2Br; C* is an asymmetric carbon, so d and l forms (a racemic mixture) result.
Teacher's Note: The product CH₃CH₂CHBrCH₂Br has one chiral carbon, so d and l isomers form.
Exam Note: One chiral centre gives two enantiomers.
Question AR20. S: CH3COCH2COOC2H5 will give iodoform test.
E: It contains CH3–CO– unit linked to carbon atom.
Solution. Answer: (b) (S is wrong but E is correct). The CH3–CO– unit linked to carbon is present, so E is correct. But the molecule does not give the iodoform test: iodine reacts at the acidic CH2 (between the C=O groups) in place of the CH3 unit, giving CH3COCHI·COOC2H5.
Teacher's Note: Iodine attacks the more acidic methylene hydrogen, not the CH₃ of the acetyl group.
Exam Note: Active methylene blocks iodoform.
Question AR21. S: Cyclohexane-1,3-dione shows tautomerism.
E: It contains α-hydrogen atom near keto group.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The CH2 between the two C=O groups gives the enol (3-hydroxycyclohex-2-enone, stabilised by conjugation); α-hydrogen is the reason for tautomerism.
Teacher's Note: The α-hydrogens flanked by two C=O are very acidic and enolise easily.
Exam Note: α-H gives keto–enol.
Question AR22. S: Addition of Br2 on maleic acid gives d and l isomers of product.
E: The addition of Br2 on maleic acid follows anti addition.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The term anti addition means the two Br atoms add in the trans position. Anti addition to the cis-alkene maleic acid gives the racemic (d and l) 2,3-dibromosuccinic acid.
Teacher's Note: Anti addition to a cis-alkene gives a racemic pair of dibromides.
Exam Note: cis + anti gives d,l.
Question AR23. S: Benzaldehyde forms two oximes on reacting with NH2OH.
E: The two oximes are formed due to geometrical isomerism arisen in the product.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). C6H5CH=NOH exists as syn and anti forms because the C=N bond restricts rotation, so two oximes are formed.
Teacher's Note: C=N restricts rotation, so syn and anti oximes arise.
Exam Note: Syn and anti oximes.
Question AR24. S: Aniline does not undergo Friedel–Crafts reaction.
E: The –NH2 group of aniline reacts with AlCl3 (Lewis acid) to give acid–base reaction.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Aniline is a Lewis base and consumes AlCl3; the resulting salt-like complex is strongly deactivated, so the ring cannot develop the electrophile.
Teacher's Note: AlCl₃ binds the lone pair on N, deactivating the ring and removing the catalyst.
Exam Note: Acid–base reaction kills catalyst.
Question AR25. S: Cannizzaro's reaction is a disproportionation reaction.
E: One molecule of aldehyde is oxidised at the cost of the other.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). 2C6H5CHO + NaOH → C6H5COONa + C6H5CH2OH: one molecule is oxidised and the other reduced, which is disproportionation.
Teacher's Note: The same aldehyde is both oxidised (to acid) and reduced (to alcohol).
Exam Note: Oxidation and reduction together.
Question AR26. S: All enzymes are proteins but all proteins are not enzymes.
E: Enzymes are biocatalysts and possess a stable configuration having active sites.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). As per the book, E is the correct reason for the statement. (Note: this is arguably only a partial explanation, since E does not say why other proteins are not enzymes.)
Teacher's Note: Enzymes are proteins with active sites that catalyse reactions; many proteins are structural or transport.
Exam Note: Book key kept.
Question AR27. S: Borazole is less reactive than benzene.
E: Both borazole and benzene have the same structure (three π-bonds) but borazole has polar bonds.
Solution. Answer: (b) (S is wrong but E is correct). Borazole (inorganic benzene) has polar B–N bonds and is more reactive than benzene, so S is wrong; E is correct and suggests that borazole is more reactive.
Teacher's Note: Polar B–N bonds make borazole easier to attack, unlike nonpolar benzene.
Exam Note: Polarity raises reactivity.
Question AR28. S: Addition of H2 in presence of a catalyst on trans-2,3-diphenylbut-2-ene gives meso form of 2,3-diphenylbutane.
E: Addition of H2 in presence of a catalyst is syn-addition and the product formed is a racemic mixture.
Solution. Answer: (b) (S is wrong but E is correct). Catalytic hydrogenation is syn addition; syn addition of H2 to the trans (E) alkene gives the racemic (±)-2,3-diphenylbutane, not the meso form. So S is wrong and E is correct.
Teacher's Note: Syn addition to the trans alkene gives the (±) pair; the cis alkene would give meso.
Exam Note: trans + syn gives racemic.
Question AR29. S: HCHO has sp2-hybridised carbon and the geometry has H–C–H = 116° and H–C=O = 122°.
E: The bond angles are changed due to multiple bond–bond pair repulsion.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The C=O double bond has more electron density and repels the C–H bond pairs more than they repel each other, so H–C=O (122°) is larger and H–C–H (116°) smaller than 120°.
Teacher's Note: The double bond repels more strongly than single bonds, widening H–C=O.
Exam Note: Multiple bond repels more.
Question AR30. S: tert-Butylbenzene on oxidation gives benzoic acid.
E: A side chain containing benzylic hydrogen atom is oxidised to –COOH group.
Solution. Answer: (b) (S is wrong but E is correct). Tertiary butylbenzene has no benzylic hydrogen, so it is not oxidised to benzoic acid (S is wrong); E is a correct statement.
Teacher's Note: Oxidation of a side chain needs a benzylic C–H; the tert-butyl carbon has none.
Exam Note: No benzylic H, no oxidation.
Question AR31. S: Ethanol is more viscous than glycerol.
E: Both possess H-bonding.
Solution. Answer: (b) (S is wrong but E is correct). Glycerol (three OH groups) has more extensive H-bonding and so is more viscous than ethanol (S is wrong); E is a correct statement.
Teacher's Note: Three OH groups per molecule give glycerol far more H-bonding and viscosity.
Exam Note: More OH groups, higher viscosity.
Question AR32. S: The presence of Ag+ ion enhances the solubility of alkenes in water.
E: Ag+ co-ordinates with the alkene by p–d π bonding giving an ion and thus solubility increases.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Alkene donates π-electrons to the empty orbital of Ag+ (and back-bonding from filled d orbitals), forming a soluble silver–alkene complex ion.
Teacher's Note: Alkene–Ag⁺ complex is an ion, so it dissolves better in water.
Exam Note: Complex ion formation.
Question AR33. S: The central carbon–carbon bond in 1,3-butadiene is shorter than n-butane.
E: In butadiene the central bond has sp2–sp2 nature whereas in butane it is sp3–sp3.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). An sp2 orbital has more s-character (33%) than sp3 (25%), so the sp2–sp2 bond is shorter; delocalisation also adds some double-bond character.
Teacher's Note: More s-character pulls the sp²–sp² bond closer than sp³–sp³.
Exam Note: Higher s-character shortens bonds.
Question AR34. S: 2,3-Dichloropentene has four stereoisomers.
E: It contains two chiral carbon atoms.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). As printed in the book, the key is (c): two different chiral centres give 2² = 4 stereoisomers (this holds for 2,3-dichloropentane).
Teacher's Note: Two dissimilar chiral carbons give 2² = 4 stereoisomers.
Exam Note: n dissimilar centres give 2ⁿ isomers.
Question AR35. S: Chlorine deactivates the C6H6 ring for SE reaction yet it is o-, p-directing.
E: –M effect is greater than –I effect in chlorobenzene (as printed).
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Book key (c). Chlorine withdraws electrons by the –I effect (deactivating) but donates lone-pair electrons through resonance (+M), which directs the electrophile to o- and p-positions. (E is correctly read as the opposing resonance and inductive effects; the printed sign appears to be a misprint.)
Teacher's Note: Cl withdraws by induction (deactivates) but donates by resonance, directing ortho and para.
Exam Note: Induction and resonance oppose.
Question AR36. S: SN2 reactions take place through transition state formation.
E: Primary carbocation is more stable than secondary carbocation.
Solution. Answer: (a) (S is correct but E is wrong). SN1 reaction takes place with carbocation formation, whereas SN2 reactions proceed with a transient state. Primary carbocation is less stable than secondary carbocation, so E is wrong.
Teacher's Note: S_N2 proceeds through a single pentacoordinate transition state; 2° cations are more stable than 1°.
Exam Note: Cation stability order 3°>2°>1°.
Question AR37. S: Addition of bromine on trans-2-butene yields meso-2,3-dibromobutane.
E: Br2 shows electrophilic addition.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). Addition of Br2 on trans-2-butene gives the meso compound by anti-addition; electrophilic addition is true but it is the anti-addition, not electrophilicity, that decides the meso product.
Teacher's Note: Anti addition through bromonium ion on trans-alkene gives meso.
Exam Note: Stereochemistry from anti addition.
Question AR38. S: CH≡C–CH2–CH=CH2 adds up HBr to give CH≡C–CH2CHBr·CH3 while CH≡C–CH=CH2 adds up HBr to give CH2=CBr–CH=CH2.
E: An isolated double bond is more reactive than a triple bond but in the later case a conjugated molecule is formed.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). In the first compound the isolated C=C is more reactive than C≡C, so HBr adds to the double bond; in vinylacetylene the conjugated system favours attack at the triple bond (the cation formed is allylic-type stabilised), giving the bromodiene.
Teacher's Note: Isolated alkene beats alkyne; in conjugated enyne the intermediate stabilised by conjugation wins.
Exam Note: Conjugation changes site of attack.
Question AR39. S: A mixture of HNO3 and H2SO4 is used for the nitration of benzene.
E: H2SO4 works as an acid and HNO3 as a base to produce NO2+ ion.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). 2H2SO4 + HNO3 → NO2+ + 2HSO4− + H3O+; the stronger acid H2SO4 protonates HNO3, which loses water to form the nitronium ion.
Teacher's Note: H₂SO₄ protonates HNO₃, which loses water, giving NO₂⁺.
Exam Note: Nitronium ion is the electrophile.
Question AR40. S: Cyclohexane floats over water.
E: Cyclohexane always has boat-like structure.
Solution. Answer: (a) (S is correct but E is wrong). Cyclohexane is less dense than water and floats, so S is correct. Its more stable conformation is the chair form, so E is wrong.
Teacher's Note: Cyclohexane is mostly in the chair form, lower in energy than the boat.
Exam Note: Chair is the stable form.
Question AR41. S: Iodination of alkane is carried out in presence of iodic acid.
E: Iodine is an oxidising agent.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Book key (c). The HI formed in the iodination reduces back the product (reversible reaction); iodic acid (an oxidising agent) oxidises HI to I2 and drives the reaction forward. (E is worded loosely as printed.)
Teacher's Note: HI reverses the iodination; an oxidant such as HIO₃ removes HI and drives the reaction forward.
Exam Note: Oxidant removes HI.
Question AR42. S: Reaction of tert-butyl chloride with Na gives 2,2,3,3-tetramethylbutane.
E: tert-Butyl chloride on Wurtz reaction gives alkene.
Solution. Answer: (b) (S is wrong but E is correct). (CH3)3CBr (tertiary halide) with Na gives (CH3)2C=CH2 by elimination rather than coupling, so S is wrong and E is correct.
Teacher's Note: Tertiary halides eliminate under Wurtz conditions because coupling is sterically hindered.
Exam Note: Tertiary halide gives alkene.
Question AR43. S: A small amount of ethanol is added to CHCl3 bottles.
E: It acts as a negative catalyst for the oxidation of CHCl3 to COCl2.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Chloroform is slowly oxidised by air to poisonous phosgene; ethanol converts any COCl2 into harmless diethyl carbonate and so acts as an inhibitor.
Teacher's Note: Ethanol destroys phosgene by converting it into diethyl carbonate, protecting chloroform.
Exam Note: Ethanol is a stabiliser.
Question AR44. S: The p-isomer of dichlorobenzene has a higher m.p. than o- and m-isomers.
E: The p-isomer is symmetrical and thus shows more closely packed structure.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Symmetry allows the para isomer to pack well in the crystal lattice, so it has the highest melting point.
Teacher's Note: Symmetrical para isomer packs best in the crystal, raising m.p.
Exam Note: Symmetry raises melting point.
Question AR45. S: n-Butyl chloride has a lower b.p. than n-butyl bromide.
E: The b.p. increases with increase in molar mass.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Greater molar mass (and polarisability) of bromide gives stronger van der Waals forces and a higher boiling point.
Teacher's Note: Heavier, more polarisable bromide has stronger dispersion forces.
Exam Note: b.p. rises with molar mass.
Question AR46. S: CH3I gives a precipitate with AgNO3 solution on heating but CHCl3 does not.
E: C–I bond is quite weak as compared to C–Cl bond.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The weak C–I bond breaks to give I−, which precipitates yellow AgI; the stronger C–Cl bond in CHCl3 does not ionise.
Teacher's Note: Weak C–I breaks to give iodide that forms AgI; C–Cl in chloroform is strong.
Exam Note: Bond strength decides ionisation.
Question AR47. S: Alcohols cannot be dried by CaCl2.
E: CaCl2 forms solvated molecules with alcohols.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). CaCl2 forms addition compounds (alcoholates), e.g. CaCl2·4C2H5OH, so it removes the alcohol itself.
Teacher's Note: CaCl₂ binds alcohol as a crystalline adduct, so it is useless as drying agent.
Exam Note: Use CaO or Mg instead.
Question AR48. S: Methanol is a stronger acid than water.
E: All alcohols are stronger acids than water.
Solution. Answer: (a) (S is correct but E is wrong). CH3OH is a stronger acid than water (as per the book) and the rest of the alcohols are weaker acids than water, so E is wrong.
Teacher's Note: Alkyl groups donate electrons, so most alcohols are weaker acids than water; methanol is the exception.
Exam Note: E is false: alkyl groups reduce acidity.
Question AR49. S: Acid catalysed dehydration of t-butanol is faster than n-butanol.
E: The order of stability of carbocation is 3° > 2° > 1°.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Dehydration goes through a carbocation; the tertiary cation is formed much faster than a primary one.
Teacher's Note: Rate depends on carbocation stability: tertiary cations form fastest.
Exam Note: 3° > 2° > 1° cations.
Question AR50. S: Acetone forms one oxime whereas acetophenone forms two oximes.
E: In acetophenone, syn and anti forms of geometrical isomers are possible.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Acetone oxime has two identical CH3 groups so no geometrical isomers; the two unlike groups in acetophenone (CH3 and C6H5) allow syn and anti forms.
Teacher's Note: Unlike groups on C=N give syn/anti oximes; acetone has identical groups.
Exam Note: Identical groups give one oxime.
Question AR51. S: The boiling point of nitro-alkanes is higher than their corresponding alkyl nitrites.
E: Nitro-alkanes show strong dipole–dipole interaction.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Nitroalkanes are highly polar (dipole moment about 3.5 D), so dipole–dipole attractions raise the boiling point.
Teacher's Note: Strongly polar nitroalkanes attract each other more than the less polar nitrites.
Exam Note: Polarity raises b.p.
Question AR52. S: Acylation of aniline increases the reactivity of the C6H6 ring.
E: Acylation of aniline decreases the electron density at C6H6 ring.
Solution. Answer: (b) (S is wrong but E is correct). –NHCOCH3 has a lesser activating nature than –NH2, because the N lone pair is partly drawn toward the carbonyl; so the ring becomes less reactive (S is wrong, E is correct).
Teacher's Note: Acetylation ties up nitrogen's lone pair, so the ring is less activated.
Exam Note: Acetanilide is less reactive.
Question AR53. S: Sulphanilic acid is insoluble in water and organic solvents.
E: Sulphanilic acid is a typical dipolar salt.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). It exists as the zwitterion H3N+–C6H4–SO3−; the strong ionic lattice makes it insoluble in organic solvents and only sparingly soluble in water.
Teacher's Note: Zwitterion forms a strong ionic lattice, lowering solubility.
Exam Note: Dipolar ion explains behaviour.
Question AR54. S: Nitromethane and aci-nitromethane are tautomers.
E: Migration of H atom from α-C atom to electronegative atom which is bonded with multiple bond develops this phenomenon.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). CH3NO2 ⇌ CH2=N(O)OH is a prototropic shift of α-hydrogen to oxygen, which is the definition of tautomerism.
Teacher's Note: α-H moves to an O of the N=O group, giving the aci-nitro form.
Exam Note: Tautomers interconvert by H shift.
Question AR55. S: Alcohols give only substitution products with HX and not elimination product.
E: X− is a very weak base which cannot abstract a proton from alcohol.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). X− (conjugate base of a strong acid) is a very weak base, so it does not abstract a β-proton; it attacks the carbocation instead and gives substitution.
Teacher's Note: Halide ions are too weakly basic to remove β-H, so substitution wins.
Exam Note: Weak base favours substitution.
Question AR56. S: Salicylaldehyde is less soluble in water than p-hydroxybenzaldehyde.
E: The former shows intermolecular H-bonding.
Solution. Answer: (a) (S is correct but E is wrong). Salicylaldehyde shows intramolecular H-bonding, so it is less soluble in water than p-hydroxybenzaldehyde, which forms intermolecular H-bonds with water. S is correct but E is wrong.
Teacher's Note: Ortho isomer is chelated internally and so cannot H-bond with water as well.
Exam Note: Intra- versus intermolecular H-bonds.
Question AR57. S: R–CH=CH2 + CCl3Br (peroxide) → R–CHBr–CH2CCl3.
E: The addition obeys free radical addition on alkenes in presence of peroxide.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Peroxide generates •CCl3, which adds to the terminal carbon to give the more stable secondary radical, which then abstracts Br from CCl3Br.
Teacher's Note: •CCl₃ adds to the terminal carbon to give the more stable secondary radical.
Exam Note: Radical chain, secondary radical.
Question AR58. S: 2,3-Dimethylbut-2-ene is more stable than but-2-ene.
E: 2,3-Dimethylbut-2-ene possesses 12 α-hydrogen atoms whereas but-2-ene possesses only 6 and therefore the former shows more pronounced hyperconjugation.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The more α-H atoms attached to the sp2 carbons, the more hyperconjugation structures and the more stable the alkene.
Teacher's Note: More α-hydrogens give more hyperconjugative structures, so greater stability.
Exam Note: Count α-H atoms.
Question AR59. S: Hydroxylamine NH2OH gives positive Lassaigne's test for nitrogen.
E: The formation of NaCN during preparation of sodium extract will give positive Lassaigne's test for nitrogen.
Solution. Answer: (b) (S is wrong but E is correct). Hydroxylamine is inorganic (no carbon), so NaCN cannot form on fusion with sodium; S is wrong. E is correct for organic compounds containing C and N.
Teacher's Note: Lassaigne needs both carbon and nitrogen to form NaCN; NH₂OH has no carbon.
Exam Note: No carbon, no cyanide.
Question AR60. S: RI is more reactive than RCl.
E: The rate of reaction for SN1 or SN2 mechanism is RI > RCl.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Reactivity of alkyl halides is RI > RBr > RCl > RF for both SN1 and SN2 mechanisms, because C–I is the weakest bond and I− the best leaving group.
Teacher's Note: Iodide is the best leaving group among halides, so RI reacts fastest.
Exam Note: RI > RBr > RCl > RF.
Question AR61. S: Chloral hydrate CCl3CH(OH)2 is a stable molecule.
E: An organic compound having two –OH groups on one carbon atom is unstable.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). Chloral hydrate is stable in spite of two OH groups on one carbon, because of intramolecular H-bonding with the Cl atoms. E is a true general statement but does not explain S.
Teacher's Note: Intramolecular O–H···Cl bonds stabilise this exceptional gem-diol.
Exam Note: Exception to gem-diol instability.
Question AR62. S: Addition of KCN to carbonyl compounds decreases the pH of the solution.
E: KCN in aqueous solution forms a basic solution due to hydrolysis of CN−.
Solution. Answer: (b) (S is wrong but E is correct). KCN + H2O ⇌ KOH + HCN: the HCN formed adds to the carbonyl compound, so the hydrolysis goes forward and [OH−] increases, so the pH increases. S is wrong and E is correct.
Teacher's Note: Hydrolysis of CN⁻ makes the solution basic; its consumption pushes pH higher.
Exam Note: pH rises, not falls.
Question AR63. S: In strongly acidic medium, aniline becomes less reactive towards electrophilic reagent.
E: The –NH2 group is o- and p-directing.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). In acid the –NH2 group forms –NH3+ (anilinium ion), which is m-directing and deactivates the ring toward SE. E is true for the free amine but does not explain S.
Teacher's Note: Protonation gives deactivating, meta-directing anilinium; ortho/para direction is for the free amine.
Exam Note: Protonation deactivates the ring.
Question AR64. S: Trans-2-chloropropene (as printed; 1-chloropropene) has a higher dipole moment than cis-2-chloropropene.
E: The resultant vector sum of all the vectors in trans-2-chloropropene is more than cis-2-chloropropene.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). In the trans isomer the C–Cl and C–CH3 bond moments add (the CH3 moment acts toward the double bond), while in the cis isomer they partly subtract; hence trans has the larger resultant moment.
Teacher's Note: Vector addition in trans versus subtraction in cis gives trans the larger dipole.
Exam Note: Resultant dipole decides.
Question AR65. S: Aryl halides undergo nucleophilic substitution with ease.
E: The carbon–halogen bond in aryl halides has partial double-bond character.
Solution. Answer: (b) (S is wrong but E is correct). The halo group decreases electron density in the ring, but by mesomeric effect the C–Cl bond acquires partial double-bond character, so aryl halides are very unreactive toward nucleophiles. S is wrong, E is correct.
Teacher's Note: Resonance shortens and strengthens the C–X bond, so aryl halides resist nucleophiles.
Exam Note: Aryl halides are inert.
Question AR66. S: Benzene removes butter stain from a table cloth.
E: Butter has an affinity towards benzene.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). Benzene, being non-polar, dissolves oils and fats, which are weakly polar. Both statements are correct (as per the book key (d)).
Teacher's Note: Like dissolves like: non-polar benzene dissolves fatty butter.
Exam Note: Non-polar solvent dissolves fats.
Question AR67. S: β-Keto carboxylic acids lose CO2 when heated to about 370 K.
E: An enol is first formed by loss of CO2, but it readily tautomerises to give a more stable ketone.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). The β-keto acid loses CO2 through a cyclic six-membered transition state giving an enol that tautomerises to the ketone, e.g. CH3CH2COCH2COOH → CH3CH2COCH3. Book key (d).
Teacher's Note: Six-membered cyclic transition state loses CO₂, and the enol tautomerises to the ketone.
Exam Note: β-Keto acid decarboxylates on warming.
Question AR68. S: SN2 reactions of an optically active aryl halide with an aqueous solution of KOH always give an alcohol with opposite sign of rotation.
E: SN2 reactions always proceed with inversion of configuration.
Solution. Answer: (b) (S is wrong but E is correct). Aryl halides do not undergo SN2 because the halogen cannot be replaced by OH (partial double-bond character), and inversion of configuration need not mean a reversed sign of rotation. S is wrong; E is correct.
Teacher's Note: Aryl halides cannot undergo S_N2; inversion of configuration does not fix the sign of rotation.
Exam Note: S_N2 inverts, not necessarily reverses sign.
Question AR69. S: 4-Nitrochlorobenzene undergoes nucleophilic substitution more readily than chlorobenzene.
E: Chlorobenzene undergoes nucleophilic substitution by elimination–addition mechanism whereas 4-nitrochlorobenzene undergoes nucleophilic substitution by addition–elimination mechanism.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). The intermediate carbanion from 4-nitrochlorobenzene is stabilised by the –R effect of the NO2 group, which is why it reacts more readily; E is true but is not the reason. Book key (d).
Teacher's Note: The para-NO₂ group stabilises the Meisenheimer carbanion by its –R effect.
Exam Note: EWG at para activates SNAr.
Question AR70. S: p-Nitrophenol is a stronger acid than o-nitrophenol.
E: Intramolecular hydrogen bonding makes the o-isomer weaker than the p-isomer.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). In o-nitrophenol the O–H is held by intramolecular H-bonding to the NO2 group, so it loses H+ less easily; hence the p-isomer is more acidic.
Teacher's Note: Chelation in the ortho isomer retains the proton, lowering its acidity.
Exam Note: Intramolecular H-bond weakens acidity.
Question AR71. S: Dimethyl sulphide is commonly used for the reduction of an ozonide of a compound.
E: It reduces the ozonide giving water soluble dimethyl sulphoxide and excess of it evaporates.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Ozonide + (CH3)2S → 2 carbonyl compounds + (CH3)2S=O; the sulphoxide is water soluble, and excess dimethyl sulphide is volatile.
Teacher's Note: DMS reduces the ozonide to carbonyls, giving water-soluble DMSO.
Exam Note: Reductive ozonolysis workup.
Question AR72. S: Ethyl alcohol reacts with HI to give ethyl iodide but it does not react with HCN.
E: HI, being a strong acid, donates a proton to ethyl alcohol, so Et–OH2+ is formed readily; OH2+ being a good leaving group, reaction with I− occurs. HCN being a weak acid does not form CH3CH2OH2+.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The protonated alcohol has a good leaving group (water), which iodide displaces; HCN is too weak an acid to protonate the alcohol.
Teacher's Note: Protonation converts OH into a good leaving group; weak acid HCN cannot do this.
Exam Note: Strong acid activates alcohol.
Question AR73. S: The phenyl group is known to exert negative inductive effect but each phenyl ring in biphenyl (C6H5–C6H5) is more reactive than benzene towards SE reaction.
E: In biphenyl one of the phenyl groups acts as electron donor and the other as electron acceptor.
Solution. Answer: (a) (S is correct but E is wrong). Both phenyl groups in biphenyl are of the same nature (each can donate through resonance), so E is wrong, while S is correct.
Teacher's Note: Both rings are identical; each activates the other through resonance donation.
Exam Note: E is false.
Question AR74. S: The enol form of CH3·CO·CH2·CO·CH3 is less stable than the enol form of CH3COCH3.
E: H-bonding in the enol form of CH3COCH3 is stronger than that of the enol form of CH3·CO·CH2COCH3.
Solution. Corrected: Both statements are wrong as printed, so no option (a)–(d) fits. The enol of acetylacetone is much more stable than the enol of acetone, because it is conjugated and has a strong intramolecular six-membered H-bond (acetone's enol has none). The book key (a) is not right; the printed statements appear to be reversed.
Teacher's Note: Acetylacetone's enol is stabilised by conjugation and a chelate H-bond; acetone's is not.
Exam Note: Chelated enol is more stable.
Question AR75. S: A carboxylic acid on treatment with ammonia at room temperature gives an amide.
E: Carboxylic acids do not undergo nucleophilic substitution reactions under basic conditions.
Solution. Answer: (b) (S is wrong but E is correct). RCOOH + NH3 → RCOONH4 (salt) at room temperature; the amide RCONH2 forms only on heating at 150–200°C. S is wrong; E is correct.
Teacher's Note: At room temperature ammonia only neutralises the acid to an ammonium salt; heating gives amide.
Exam Note: Salt first, amide on heating.
Question AR76. S: The energy of the resonance hybrid is equal to the average of the energies of all the canonical forms.
E: The resonance hybrid cannot be presented by a single structure.
Solution. Answer: (b) (S is wrong but E is correct). Canonical forms do not have real existence, and the hybrid is more stable (lower in energy) than any of them, so its energy cannot be the average. S is wrong, E is correct.
Teacher's Note: Resonance hybrid is lower in energy than every contributing structure.
Exam Note: Resonance energy lowers hybrid energy.
Question AR77. S: Pent-2-one and pent-3-one are position isomers.
E: The keto group is a divalent group.
Solution. Answer: (b) (S is wrong but E is correct). Pent-2-one and pent-3-one are metamers (the keto group, being divalent, lies between two different alkyl groups: CH3COC3H7 and C2H5COC2H5). S is wrong, E is correct.
Teacher's Note: Different alkyl groups on both sides of a divalent C=O make them metamers.
Exam Note: Metamers, not position isomers.
Question AR78. S: Cyclooctatetraene (drawn in the book) is cyclic and has a conjugated 8π-electron system but is not an aromatic compound.
E: (4n + 2)π electron rule does not hold good and the ring is not planar.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). 8π electrons do not fit 4n + 2, and the tub-shaped ring is non-planar, so it is not aromatic; the explanation is the correct reason.
Teacher's Note: Aromaticity needs a planar ring with 4n+2 π electrons; COT has 8 and is tub-shaped.
Exam Note: 4n+2 and planarity.
Question AR79. S: Optically active 2-iodobutane on treatment with NaI in acetone undergoes racemisation.
E: The reaction involves multiple Walden inversion and the product contains a mixture of dextro and laevo forms.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). Each I− exchange by SN2 inverts the configuration, and repeated exchange converts the active compound to a 50:50 mixture of enantiomers.
Teacher's Note: Repeated S_N2 iodide exchange inverts again and again until a racemic mixture forms.
Exam Note: Multiple inversions give racemic.
Question AR80. S: The presence of a nitro group at ortho or para position increases the reactivity of haloarenes towards SN reaction.
E: The nitro group, being an electron-withdrawing group, decreases the electron density over the benzene ring.
Solution. Answer: (c) (both S and E are correct and E is the correct explanation of S). The –NO2 group at o/p positions stabilises the carbanion intermediate (–R and –I effects), and the reduced electron density at the ring favours attack by the nucleophile.
Teacher's Note: Electron-poor ring invites nucleophiles; o/p NO₂ stabilises the intermediate.
Exam Note: EWG at o/p activates.
Question AR81. S: Hydrolysis of (−)-2-bromooctane proceeds with inversion of configuration.
E: The reaction proceeds through the formation of a carbocation.
Solution. Answer: (a) (S is correct but E is wrong). Hydrolysis of 2-bromooctane follows the SN2 mechanism (inversion), so S is correct; it does not proceed through a carbocation, so E is wrong.
Teacher's Note: S_N2 gives inversion in one step; a carbocation would racemise.
Exam Note: Inversion means S_N2.
Question AR82. S: o-Nitrophenol is less soluble in water than m- and p-isomers.
E: m- and p-Nitrophenol exist as associated liquid.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). o-Nitrophenol shows intramolecular H-bonding, whereas m- and p-isomers show intermolecular H-bonding (association and H-bonding with water). Both statements are correct but E does not give the reason for lower solubility of the o-isomer (book key (d)).
Teacher's Note: Chelated ortho isomer cannot H-bond with water, so it dissolves less.
Exam Note: Intramolecular H-bond lowers solubility.
Question AR83. S: The α-H atom in carbonyl compounds is less acidic.
E: The anion formed after the loss of α-H atom is resonance stabilised.
Solution. Answer: (b) (S is wrong but E is correct). More stable the anion formed after loss of the α-H atom by ketones, the more acidic is the α-H. So S is wrong; E is correct.
Teacher's Note: The enolate is resonance stabilised, making α-H fairly acidic.
Exam Note: α-H of carbonyls is acidic.
Question AR84. S: Addition of bromine to trans-2-butene yields meso-2,3-dibromobutane.
E: Bromine addition to an alkene is an electrophilic addition.
Solution. Answer: (d) (both S and E are correct but E is not the correct explanation of S). It is an anti addition of Br2 to the alkene through the bromonium ion; the product is meso. E is true but is not the reason for the meso product.
Teacher's Note: trans-alkene with anti addition gives the meso dibromide.
Exam Note: Stereochemistry from anti addition.
Question AR85. S: In strongly acidic solution aniline becomes more reactive towards electrophilic reagents.
E: The amino group being completely protonated in strongly acidic solution, the lone pair of electrons on the nitrogen is no longer available for resonance.
Solution. Answer: (b) (S is wrong but E is correct). C6H5NH2 + H+ → C6H5NH3+; the anilinium ion is deactivated and m-directing, so the ring is less reactive. S is wrong; E is correct.
Teacher's Note: Protonated nitrogen cannot donate its lone pair, so the ring becomes deactivated.
Exam Note: Protonation switches off activation.
Question AR86. S: Glucose gives a reddish-brown precipitate with Fehling's solution.
E: Reaction of glucose with Fehling's solution gives CuO and gluconic acid.
Solution. Answer: (a) (S is correct but E is wrong). Glucose reduces Fehling's solution to a reddish-brown precipitate of Cu2O (S is correct), not CuO, so E is wrong.
Teacher's Note: The red precipitate is cuprous oxide Cu₂O, formed by reducing Cu²⁺.
Exam Note: Cu₂O, not CuO.
Question AR87. S: p-Hydroxybenzoic acid has a lower boiling point than o-hydroxybenzoic acid.
E: o-Hydroxybenzoic acid has intramolecular hydrogen bonding.
Solution. Answer: (b) (S is wrong but E is correct). p-Hydroxybenzoic acid has intermolecular H-bonding and so a higher b.p. than the o-isomer, which has intramolecular H-bonding. S is wrong; E is correct.
Teacher's Note: Intermolecular H-bonding in the para isomer raises its boiling point.
Exam Note: Intermolecular bonding raises b.p.
Question AR88. S: Molecules that are not superimposable on their mirror images are chiral.
E: All chiral molecules have chiral centres.
Solution. Answer: (a) (S is correct but E is wrong). S is the definition of chirality. E is wrong, since some chiral molecules (e.g. 2,3-pentadiene, an allene) have no chiral carbon but are chiral molecules.
Teacher's Note: Allenes and some biaryls are chiral without a chiral carbon.
Exam Note: Chirality does not need a chiral carbon.
Question AR89. S: Aniline on reaction with NaNO2/HCl at 0°C followed by coupling with β-naphthol gives a dark blue coloured precipitate.
E: The colour of the compound formed in the reaction of aniline with NaNO2/HCl at 0°C followed by coupling with β-naphthol is due to the extended conjugation.
Solution. Answer: (b) (S is wrong but E is correct). A red (orange-red) azo dye is formed, not a dark blue one, so S is wrong; the colour is due to extended conjugation, so E is correct.
Teacher's Note: The azo dye from coupling with β-naphthol is red; extended conjugation gives colour.
Exam Note: Dye is red, not blue.
Question AR90. S: Bromobenzene upon reaction with Br2/Fe gives 1,4-dibromobenzene as the major product.
E: In bromobenzene, the inductive effect of the bromo group is more dominant than the mesomeric effect in directing the incoming electrophile.
Solution. Answer: (a) (S is correct but E is wrong). The bromo group is o- and p-directing, and the para product is major (S correct); but it is the mesomeric effect that decides the orientation, so E is wrong.
Teacher's Note: Br directs ortho/para by resonance donation; induction only deactivates.
Exam Note: Resonance decides orientation.
Matching Type Problems
Type I: only one match possible (Q1–Q5). Type II: more than one match possible (Q6–Q11). Q12–Q14 use codes; Q15–Q17 are based on a three-column table.
Question MT1. Match List-A with List-B. (a) Nitrobenzene to hydrazobenzene (b) Nitrobenzene to azoxybenzene (c) Nitrobenzene to aniline (d) Nitrobenzene to phenylhydroxylamine. List-B: 1. Sn/HCl 2. CH3OH/CH3ONa 3. Zn/NH4Cl 4. Zn/KOH
Solution. Answer (from key): a–4; b–2; c–1; d–3. Zn/KOH (alkaline) reduces nitrobenzene to hydrazobenzene; methanolic CH3ONa gives azoxybenzene; Sn/HCl (acidic) gives aniline; Zn/NH4Cl (neutral) gives phenylhydroxylamine.
Teacher's Note: Reduction product of nitrobenzene depends on the medium: acidic, neutral, alkaline.
Exam Note: Match medium to product.
Question MT2. Match List-A with List-B. (a) Heating glycerol with conc. H2SO4 (b) Hydrogenation of carbon (c) Action of glyoxal with NaOH (d) Reductive ozonolysis of ethyne. List-B: 1. Glyoxal as one of the products 2. 2-hydroxy ethanoic acid 3. Synthetic petrol 4. Acrolein
Solution. Answer (from key): a–4; b–3; c–2; d–1. Glycerol loses 2H2O to give acrolein; hydrogenation of coal gives synthetic petrol; glyoxal with NaOH (intramolecular Cannizzaro) gives glycolate (2-hydroxyethanoic acid); ozonolysis of ethyne gives glyoxal (OHC–CHO).
Teacher's Note: Glycerol dehydrates to acrolein; ethyne ozonolysis gives glyoxal; glyoxal undergoes intramolecular Cannizzaro.
Exam Note: Know each named reaction product.
Question MT3. Match List-A with List-B (IIT 2007). (A) Cellulose (B) Nylon 6,6 (C) Protein (D) Sucrose. List-B: (p) Natural polymer (q) Synthetic polymer (r) Amide linkage (s) Glucoside linkage
Solution. Answer (from key): A–p; B–q; C–r; D–s. Cellulose is a natural polymer; nylon 6,6 is a synthetic polymer; protein contains amide (peptide) linkages; sucrose has a glycosidic (glucoside) linkage.
Teacher's Note: Cellulose natural; nylon-6,6 synthetic; protein has peptide (amide) bonds; sucrose has a glycosidic bond.
Exam Note: One property each: match uniquely.
Question MT4. Match the acid with its Ka (IIT 2003). (A) Benzoic acid (B) p-Nitrobenzoic acid (C) p-Chlorobenzoic acid (D) p-Methoxybenzoic acid (E) p-Methylbenzoic acid. Ka: (p) 6.4 × 10−5 (q) 30.6 × 10−5 (r) 10.2 × 10−5 (s) 3.3 × 10−5 (t) 4.2 × 10−5
Solution. Answer (from key): A–p; B–q; C–r; D–s; E–t. Electron-withdrawing groups (NO2, Cl) increase acidity above benzoic acid (NO2 most, then Cl), whereas electron-donating CH3 and OCH3 decrease it, OCH3 being the weakest here.
Teacher's Note: EWG raise Ka; EDG lower it. Order: NO₂ > Cl > H > CH₃ > OCH₃.
Exam Note: Rank by substituent effect.
Question MT5. Match X with Y. X: (A) Williamson's synthesis (B) Neutral FeCl3 test (C) Lucas test. Y: (p) tert-alcohol (q) Ether (r) Phenol
Solution. Answer (from key): A–q; B–r; C–p. Williamson synthesis makes ethers; neutral FeCl3 gives violet colour with phenols; the Lucas test gives turbidity fastest with tertiary alcohols.
Teacher's Note: Williamson makes ethers; FeCl₃ detects phenols; Lucas reagent discriminates alcohols by class.
Exam Note: Reaction-to-class match.
Question MT6. Match Column-I with Column-II (IIT 2006). (A) H2N–NH3+Cl− (B) 4-hydroxy-substituted benzoic acid carrying NH3+I− (C) HO–C6H4–NH3+Cl− (D) 2,4-dinitrophenyl–NH–NH3+Br−. Column-II: (p) Sodium fusion extract of the compound gives Prussian blue colour with FeSO4 (q) Gives positive FeCl3 test (r) Gives white ppt with AgNO3 (s) Reacts with aldehyde to form the corresponding hydrazone derivative
Solution. Answer (from key): A–r,s; B–p,q; C–p,q,r; D–p,s. (A) has Cl− (white AgCl) and the N–NH2 group forms hydrazones, but has no carbon, so no Prussian blue. (B) has C and N (Prussian blue) and a phenolic OH (FeCl3); its iodide gives yellow AgI, not white. (C) has C, N, phenol and Cl−: p, q, r. (D) has C, N and a hydrazine group (hydrazone), bromide gives pale yellow AgBr, no phenol.
Teacher's Note: Prussian blue needs C and N; FeCl₃ needs phenol; white AgCl needs chloride; hydrazine NH₂ forms hydrazones.
Exam Note: Check each ion and group.
Question MT7. Match the compounds/ions in Column I with their properties/reactions in Column II (IIT 2007). (A) C6H5CHO (B) CH3C≡CH (C) CN− (D) I−. Column II: (p) gives precipitate with 2,4-dinitrophenylhydrazine (q) gives precipitate with AgNO3 (r) is a nucleophile (s) is involved in cyanohydrin formation
Solution. Answer (from key): A–p,s; B–q; C–q,r,s; D–q,r. Benzaldehyde gives a 2,4-DNP precipitate and forms cyanohydrin; propyne has a terminal ≡C–H giving a silver acetylide precipitate; CN− gives AgCN, is a nucleophile and gives cyanohydrins; I− gives AgI and is a nucleophile.
Teacher's Note: Terminal alkyne gives silver acetylide; CN⁻ is both nucleophile and AgCN precipitant; I⁻ gives AgI.
Exam Note: Terminal alkyne is the trick.
Question MT8. Match Column-I with Column-II (IIT 2009). (A) 3-bromo-2,3-dihydrobenzofuran (B) benzyl alcohol (C) salicylaldehyde (2-hydroxybenzaldehyde) (D) 1-bromo-2-nitrobenzene. Column II: (p) Nucleophilic substitution (q) Elimination (r) Nucleophilic addition (s) Esterification with acetic anhydride (t) Dehydrogenation
Solution. Answer (from key): Corrected: the book key is A–p,q,t; B–p,s,t; C–r,s; D–p. For (A), the alkyl bromide undergoes substitution (p) and elimination (q) but has no dehydrogenation (t), which belongs to the alcohol in (B). Correct match: A–p,q; B–p,s,t (substitution with HBr, esterification, dehydrogenation to benzaldehyde); C–r,s (addition to CHO, acetylation of phenolic OH); D–p (nucleophilic aromatic substitution by the o-nitro group).
Teacher's Note: Alkyl bromide: substitution and elimination; alcohol: substitution, esterification, dehydrogenation.
Exam Note: Assign each functional group.
Question MT9. Match Column-I with Column-II (IIT 2009). (A) CH3CH2CH2CN (B) CH3CH2OCOCH3 (C) CH3–CH=CH–CH2OH (D) CH3CH2CH2CH2NH2. Column II: (p) Reduction with Pd–C/H2 (q) Reduction with SnCl2/HCl (r) Development of foul smell on treatment with chloroform and alcoholic KOH (s) Reduction with diisobutylaluminium hydride (DIBAL-H) (t) Alkaline hydrolysis
Solution. Answer (from key): A–p,q,s,t; B–s,t; C–p; D–r. A nitrile is hydrogenated (p), reduced to the aldehyde by SnCl2/HCl (Stephen) (q) and DIBAL-H (s), and hydrolysed by alkali (t). An ester is reduced by DIBAL-H (s) and hydrolysed by alkali (t). The alkene in (C) is hydrogenated (p). The primary amine (D) gives the carbylamine foul smell (r).
Teacher's Note: Nitrile: all four reductions/hydrolysis; ester: DIBAL and hydrolysis; primary amine: carbylamine test.
Exam Note: Match functional group to reagent.
Question MT10. Match Column-I with Column-II (IIT 2010). (A) C6H5N2+Cl− + phenol (NaOH, 0°C) → 4-hydroxyazobenzene (B) pinacol (CH3)2C(OH)–C(OH)(CH3)2 with H2SO4 → pinacolone (C) acetophenone with 1. LiAlH4 2. H3O+ → 1-phenylethanol (D) HS–C6H10–Cl (a cyclohexane carrying SH and Cl) with base → bicyclic sulphide. Column II: (p) Racemic mixture (q) Addition reaction (r) Substitution reaction (s) Coupling reaction (t) Carbocation intermediate
Solution. Answer (from key): A–r,s,t; B–t; C–p,q; D–r. (A) is an electrophilic aromatic substitution (arenium ion, a carbocation) that is a coupling reaction. (B) pinacol rearrangement goes through a carbocation. (C) is hydride addition to C=O giving a racemic alcohol. (D) is intramolecular nucleophilic substitution.
Teacher's Note: Pinacol rearrangement runs through a carbocation; LiAlH₄ on a prochiral ketone gives a racemate.
Exam Note: Name mechanism type for each.
Question MT11. Match Column-I with Column-II (IIT 2011). (A) PhCO–CH2CH2–CO–CH3 with aq. NaOH → 3-phenylcyclopent-2-enone (B) PhCO(CH2)3Cl with CH3MgI → 2-methyl-2-phenyltetrahydrofuran (C) PhCO(CH2)3OH with H2SO4 → cyclic enol ether (dihydrofuran) (D) PhCH2CH2CH2C(CH3)2OH with H2SO4 → 1,1-dimethyltetralin. Column II: (p) Nucleophilic substitution (q) Electrophilic substitution (r) Dehydration (s) Nucleophilic addition (t) Carbanion
Solution. Answer (from key): A–r,s,t; B–p,s; C–r,s; D–q,r. (A) intramolecular aldol: carbanion (enolate) adds to C=O, then dehydration. (B) Grignard adds to C=O (nucleophilic addition) and the alkoxide displaces Cl (nucleophilic substitution). (C) OH adds to C=O, then water is lost. (D) dehydration to the cation, then intramolecular Friedel–Crafts (electrophilic substitution).
Teacher's Note: Intramolecular aldol uses a carbanion, addition and dehydration; Friedel–Crafts ring closure is electrophilic substitution.
Exam Note: List every step of each pathway.
Question MT12. Match the chemical conversions in List I with the appropriate reagents in List II (JEE Advanced II 2013). List I: P. isopropyl chloride → propene; Q. sodium isopropoxide → isopropyl ethyl ether; R. 1-methylcyclopentene → 1-methylcyclopentanol; S. 1-methylcyclopentene → 2-methylcyclopentanol (anti-Markovnikov, syn). List II: 1. (i) Hg(OAc)2; (ii) NaBH4 2. NaOEt 3. Et–Br 4. (i) BH3; (ii) H2O2/NaOH. Codes (P Q R S): (a) 2 3 1 4 (b) 3 2 1 4 (c) 2 3 4 1 (d) 3 2 4 1
Solution. Answer (from key): (a) P–2, Q–3, R–1, S–4. NaOEt (strong base) causes E2 elimination of the alkyl chloride; Et–Br with the alkoxide is Williamson ether synthesis; oxymercuration–demercuration gives the Markovnikov alcohol; hydroboration–oxidation gives the anti-Markovnikov, syn alcohol.
Teacher's Note: Strong base eliminates; alkoxide plus alkyl bromide gives ether; Hg(OAc)₂ Markovnikov, BH₃ anti-Markovnikov.
Exam Note: Match reagent to reaction type.
Question MT13. Different possible thermal decomposition pathways for peroxyesters are shown below. Match each pathway from List-I with an appropriate structure from List-II (JEE Advanced II 2013). Pathways: P: RC(O)OOR' → –CO2 → R• + R'O•; Q: –CO2 → R• + R'O• → R• + X• + carbonyl compound; R: RCO2• + R'O• → (–CO2) R• + X• + carbonyl compound; S: RCO2• + R'O• → (–CO2) R• + R'O•. List-II: 1. C6H5CH2C(O)OOCH3 2. C6H5C(O)OOCH3 3. C6H5CH2C(O)OOC(CH3)2CH2C6H5 4. C6H5C(O)OOC(CH3)3. Codes: (a) 1 3 4 2 (b) 2 4 3 1 (c) 4 1 2 3 (d) 3 2 1 4
Solution. Answer (from key): (a) P–1, Q–3, R–4, S–2. In P, benzyl loses CO2 readily (stable benzyl radical) and CH3O• does not fragment; in Q the tertiary alkoxy radical fragments (β-scission) after benzyl formation; in R PhCO2• is slow to lose CO2 while t-BuO• fragments; in S PhCO2• later loses CO2 and CH3O• stays intact.
Teacher's Note: Radical stability decides: benzyl loses CO₂ fast, PhCO₂• slowly; tertiary alkoxy radicals fragment.
Exam Note: Reason with radical stability.
Question MT14. Match the four starting materials (P, Q, R, S) in List-I with the corresponding reaction schemes (I, II, III, IV) in List-II (JEE Advanced II 2014). P: HC≡CH; Q: resorcinol; R: nitrobenzene; S: p-nitrotoluene. Scheme I: (i) KMnO4, HO−, heat (ii) H+, H2O (iii) SOCl2 (iv) NH3 → C7H6N2O3; Scheme II: (i) Sn/HCl (ii) CH3COCl (iii) conc. H2SO4, conc. HNO3 (iv) dil. H2SO4, heat (v) HO− → nitroaniline; Scheme III: (i) red hot iron, 873 K (ii) fuming HNO3, H2SO4, heat (iii) H2S, NH3 (iv) NaNO2, HCl (v) hydrolysis → C6H5NO3; Scheme IV: (i) conc. H2SO4, 60°C (ii) conc. HNO3, conc. H2SO4 (iii) dil. H2SO4, heat → C6H5NO4. Codes (P Q R S): (a) 1 4 2 3 (b) 3 1 4 2 (c) 3 4 2 1 (d) 4 1 3 2
Solution. Answer (from key): (c) P–3, Q–4, R–2, S–1. Acetylene trimerises to benzene (red-hot iron), then m-dinitrobenzene, m-nitroaniline, diazotisation and hydrolysis give m-nitrophenol (III). Resorcinol is sulphonated, nitrated and desulphonated to 2-nitroresorcinol, C6H5NO4 (IV). Nitrobenzene → aniline → acetanilide → p-nitroacetanilide → p-nitroaniline (II). p-Nitrotoluene → p-nitrobenzoic acid → acid chloride → p-nitrobenzamide, C7H6N2O3 (I).
Teacher's Note: Use molecular formulas and key steps: oxidation of CH₃, Haworth-like blocking by sulphonation, acetanilide nitration.
Exam Note: Match end-product formulas first.
Question MT15. Questions 15, 16 and 17 are based on the table (JEE Advanced II 2014). Column 1: (I) Toluene (II) Acetophenone (III) Benzaldehyde (IV) Phenol. Column 2: (i) NaOH/Br2 (ii) Br2/hν (iii) (CH3CO)2O/CH3COOK (iv) NaOH/CO2. Column 3: (P) Condensation (Q) Carboxylation (R) Substitution (S) Haloform. Question 15: For the synthesis of benzoic acid, the only correct combination is: (a) (III)(iv)(R) (b) (IV)(ii)(P) (c) (I)(iv)(Q) (d) (II)(i)(S)
Solution. Answer (from key): (d) (II), (i), (S). Acetophenone with NaOH/Br2 undergoes the haloform reaction, giving sodium benzoate (and CHBr3); acidification gives benzoic acid.
Teacher's Note: Haloform cleaves a methyl ketone, leaving the carboxylate with one carbon fewer.
Exam Note: Haloform on acetophenone gives benzoic acid.
Question MT16. Using the same table, Question 16: The only correct combination in which the reaction proceeds through radical mechanism is: (a) (I)(ii)(R) (b) (II)(iii)(R) (c) (III)(ii)(P) (d) (IV)(i)(Q)
Solution. Answer (from key): (a) (I), (ii), (R). Toluene with Br2/hν undergoes side-chain (benzylic) free-radical substitution giving benzyl bromide.
Teacher's Note: Light (hν) with Br₂ and toluene brominates the methyl group by a radical chain.
Exam Note: hν signals radical halogenation.
Question MT17. Using the same table, Question 17: The only correct combination that gives two different carboxylic acids is: (a) (IV)(iii)(Q) (b) (III)(iii)(P) (c) (II)(iv)(R) (d) (I)(i)(S)
Solution. Answer (from key): (b) (III), (iii), (P). Benzaldehyde with acetic anhydride/CH3COOK is the Perkin condensation, giving cinnamic acid together with acetic acid (two different carboxylic acids).
Teacher's Note: Perkin condensation yields cinnamic acid and acetic acid as a by-product.
Exam Note: Perkin gives two different acids.
P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 19 Structure Reactions Based Problems Part 5
Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 19 Structure Reactions Based Problems Part 5
Review detailed solutions for JEE Mathematics. The P Bahadur Solutions Numerical Chemistry Chapter 19 Structure Reactions Based Problems Part 5 PDF provides comprehensive answers mapped to standard P Bahadur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with P Bahadur Solutions
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Complete Your JEE Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.