P Bahadur Solutions Numerical Chemistry Chapter 19 Structure Reactions Based Problems Part 4

Step-by-Step P Bahadur Solutions for JEE Chemistry Chapter 19 Structure Reactions Based Problems

Review structured textbook solutions for JEE Chemistry Chapter 19 Structure Reactions Based Problems prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 19 Structure Reactions Based Problems Textbook Solutions PDF

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Structure and Reactions Based Problems - Questions 30 to 164 and Objective Problems (More Than One Answer Correct)

Question 30. An enantiomerically pure acid is treated with a racemic mixture of an alcohol having one chiral carbon. The ester formed will be: (IIT 2003) (a) optically active mixture (b) pure enantiomer (c) meso compound (d) racemic mixture

Solution. Answer: (a). The product will be optically active because the chiral carbon atoms of both the acid and the alcohol retain their configuration.

Teacher's Note: Pure (R)-acid with (R)- and (S)-alcohol gives two diastereomeric esters in unequal amounts, so activity remains.

Exam Note: Diastereomers form; mixture stays optically active.

Question 31. 2-Butanol (CH3CH(OH)CH2CH3) is treated with H+ (−H2O) to give F, which with Br2/CCl4 gives C4H8Br2 (5 such products are possible). How many structures of F are possible? (IIT 2003) (a) 2 (b) 5 (c) 6 (d) 3

Solution. Answer: (d). CH3CH2CH(OH)CH3 →(H+) butene-1 + cis-2-butene + trans-2-butene. Butene-1 with Br2 gives CH3CH2CHBr·CH2Br (d and l forms); cis-2-butene gives the racemic (d and l) 2,3-dibromobutane; trans-2-butene gives meso-2,3-dibromobutane. F has only three structures, and with Br2 they give in all 5 compounds.

Teacher's Note: Count dehydration alkenes (including geometrical isomers), then count stereoisomeric dibromides.

Exam Note: Count cis and trans separately.

Question 32. Which of the following represents the given mode of hybridization sp2 − sp2 − sp − sp from left to right? (IIT 2003) (a) H2C=CH−C≡CH (b) HC≡C−C≡CH (c) H2C=C=C=CH2 (d) H2C=CH−CH=CH2 (as drawn in the book)

Solution. Answer: (a). In CH2=CH−C≡CH the carbons are sp2, sp2, sp, sp from left to right.

Teacher's Note: Double-bonded carbon is sp2, triple-bonded carbon is sp; read the chain left to right.

Exam Note: Assign hybridization carbon by carbon.

Question 33. Ph−C≡C−CH3 →(Hg2+/H+) A. A is: (IIT 2003) (a) Ph−CO−CH2−CH3 (b) Ph−CH2−CO−CH3 (c) the enol Ph−C(OH)=CH−CH3 (d) the enol Ph−CH=C(OH)−CH3

Solution. Answer: (a). Hydration (Hg2+, H2SO4) gives the enol Ph−C(OH)=CHCH3, which tautomerises to the ketone C6H5COCH2CH3.

Teacher's Note: Water adds so that the carbocation is benzylic (stabilised by phenyl); enol then tautomerises to ketone.

Exam Note: Mention enol-keto tautomerism.

Question 34. Among the following, the molecule with the highest dipole moment is: (IIT 2003) (a) CH3Cl (b) CH2Cl2 (c) CHCl3 (d) CCl4

Solution. Answer: (a). μ(CCl4) = 0, μ(CHCl3) = 1.0 D, μ(CH2Cl2) = 1.6 D, μ(CH3Cl) = 1.86 D.

Teacher's Note: Vector addition of C−Cl dipoles: more Cl atoms partly cancel each other.

Exam Note: Quote the dipole values for full marks.

Question 35. Phenol + C2H5I →(O−C2H5, anhydrous C2H5OH) product: (IIT 2003) (a) C6H5OC2H5 (b) C2H5OC2H5 (c) C6H5OC6H5 (d) C6H5I

Solution. Answer: (b). C2H5O− will abstract a proton from phenol producing the phenoxide ion. Now C6H5O− and C2H5O− (in excess) will try to attack the methylene carbon of ethyl iodide. Since C2H5O− is a better nucleophile, it will succeed to give the ether. C6H5OH + O−C2H5 → C6H5O− + C2H5OH.

Teacher's Note: Excess ethoxide is the stronger nucleophile and wins over phenoxide in the SN2 step.

Exam Note: Compare nucleophilicity of the two anions.

Question 36. The product of acid hydrolysis of P and Q can be distinguished by: (IIT 2003) P = H2C=C(CH3)−OCOCH3; Q = CH3−CH=CH−OCOCH3. (a) Lucas reagent (b) 2,4-DNP (c) Fehling's solution (d) NaHSO3

Solution. Answer: (c). P →(H2O/H+) H2C=C(OH)CH3 → CH3COCH3 (acetone). Q →(H2O/H+) CH3−CH=CHOH → CH3CH2CHO (propanal). The aldehyde formed will reduce Fehling's solution.

Teacher's Note: Hydrolysis gives ketone from P and aldehyde from Q; only the aldehyde reduces Fehling's solution.

Exam Note: Both give 2,4-DNP; only aldehyde gives Fehling test.

Question 37. Ethyl ester →(CH3MgBr, excess) P. The product P will be (as drawn in the book): (IIT 2003) (a) (CH3)3C−OH-type carbinol with three methyl groups and OH on one carbon (b) carbinol bearing CH3, two C2H5 groups and OH (c) carbinol bearing three C2H5-type groups and OH (d) carbinol bearing C3H7/C2H5 groups and OH (alkyl groups of options (b)-(d) as printed in the book figure)

Solution. Answer: (a). RCOOC2H5 →(CH3MgBr) R−C(CH3)=O →(CH3MgBr) R−C(CH3)2−OH. The product should contain at least two methyl groups and one OH group.

Teacher's Note: Ester with excess Grignard adds two CH3 groups, giving a tertiary alcohol.

Exam Note: Ester + excess RMgX gives tertiary alcohol.

Question 38. A (drawn): the triarylmethane-type compound C(C6H4-COOH(p))(C6H4-OH(p))(3-nitro-5-hydroxyphenyl)(C≡CH) + 2 mol NaNH2 → A. The product A will be: (IIT 2003) (a) COO− and the phenolic O− on the nitro-bearing ring, alkyne C≡CH and the other phenolic OH unchanged (b) carboxylate with the alkyne anion C≡C− (phenol OH intact) (c) COOH with both phenoxide ions (d) COOH with phenoxide on the nitro ring and alkyne anion

Solution. Answer: (a). Two moles of NaNH2 (−NH2 base) will abstract the two most acidic H-atoms out of four acidic H-atoms. The acidic character is −COOH > −OH (phenolic, deactivated by NO2) > −OH > alkyne H.

Teacher's Note: Order of acidity decides which two protons the amide removes: COOH first, then nitro-activated phenol.

Exam Note: Rank acidities: COOH > nitrophenol OH > phenol OH > alkyne.

Question 39. F−C6H4−NO2 (para) →((CH3)2NH, DMF, Δ) (A) →((i) NaNO2/HCl, 0-5°C; (ii) H2/Ni) (B). B is: (IIT 2003) (a) p-H2N−C6H4−N(CH3)2 (b) p-H2N−C6H4−NH2 (c) p-O2N−C6H4−N(CH3)−CH2NH2 (d) p-O2N−C6H4−NH2

Solution. Answer: (a). F−C6H4−NO2 →((CH3)2NH, nucleophilic aromatic substitution) (CH3)2N−C6H4−NO2 →(NaNO2/HCl, 0-5°C) no reaction (tertiary amine) →(H2/Ni) (CH3)2N−C6H4−NH2.

Teacher's Note: NO2 activates F for SNAr; nitrite step does nothing, hydrogenation reduces NO2 to NH2.

Exam Note: Fluorine is replaced; NO2 finally becomes NH2.

Question 40. In the given Newman conformation, C2 (rear carbon) is rotated about the C2−C3 bond clockwise by an angle of 120°. Then the conformation obtained is: (IIT 2004) (a) Fully eclipsed (b) Partially eclipsed (c) Gauche (d) Staggered

Solution. Answer: (d). The given molecule is the staggered form of the compound. A rotation of 60° converts the staggered conformation into an eclipsed conformation and vice-versa. Rotation between 0° to 60° and more than 60° but less than 120° produces many conformations between staggered and eclipsed forms. These are called gauche forms. A rotation of exactly 120° therefore gives a staggered conformation again.

Teacher's Note: Each 60° rotation alternates staggered and eclipsed, so 120° returns a staggered form.

Exam Note: Even multiples of 60° keep the same type.

Question 41. On monochlorination of 2-methylbutane, the total number of chiral compounds is: (IIT 2004) (a) 2 (b) 4 (c) 6 (d) 8

Solution. Answer: (b). CH3−CH(CH3)−CH2−CH3 →(Cl2) (CH3)2CClCH2CH3, (CH3)2CHCHClCH3, (CH3)2CHCH2CH2Cl and CH3−C*H(CH2Cl)−CH2−CH3. Thus, out of four isomers only two have chiral carbon atoms. Each has two isomers (enantiomers), so 4 chiral compounds.

Teacher's Note: Only two of four structural isomers have a stereocentre; each exists as an enantiomeric pair.

Exam Note: Count structural isomers first, then enantiomers.

Question 42. The product of acid catalysed hydration of 2-phenyl propene is: (IIT 2004) (a) 3-phenyl-2-propanol (b) 1-phenyl-2-propanol (c) 2-phenyl-2-propanol (d) 2-phenyl-1-propanol

Solution. Answer: (c). The reaction proceeds via carbocation formation. C6H5C(CH3)=CH2 →(H+) C6H5−C+(CH3)2 →(H2O, −H+) C6H5−C(CH3)2−OH.

Teacher's Note: Markovnikov addition via the stable tertiary benzylic carbocation.

Exam Note: Draw the carbocation to earn marks.

Question 43. Which of the following is used for the conversion of 2-hexyne into trans-2-hexene? (IIT 2004) (a) H2/Pd/BaSO4 (b) H2/PtO2 (c) NaBH4 (d) Li−NH3/C2H5OH

Solution. Answer: (d). Reduction of an alkyne to an alkene by Li−NH3/C2H5OH is known as Birch reduction. The product formed is trans-hex-2-ene.

Teacher's Note: Dissolving-metal reduction gives anti addition, hence trans alkene; Lindlar gives cis.

Exam Note: Na or Li in liquid NH3 gives trans alkene.

Question 44. Benzamide on reaction with POCl3 gives: (IIT 2004) (a) Aniline (b) Chlorobenzene (c) Benzylamine (d) Benzonitrile

Solution. Answer: (d). C6H5CONH2 →(POCl3, −H2O) C6H5CN.

Teacher's Note: POCl3 is a dehydrating agent: primary amide loses water to give nitrile.

Exam Note: Amide to nitrile needs a dehydrating agent.

Question 45. The major product obtained when Br2/Fe is treated with the dimethyl-substituted naphthalene lactam (a 1,8-naphthostyril-type compound carrying an NH−C=O ring and two CH3 groups) is: (IIT 2004) (a) to (d) isomers differing in the position of Br on the aromatic ring, as drawn in the book

Solution. Answer: (a). Electrophilic substitution involves the attack of electrophile on o- and p-position. The ring attached with NH has rich electron density. As ortho position is occupied, p-position is attached by Br+. (Option (a) is the isomer with Br on the NH-bearing ring para to the NH-attached carbon.)

Teacher's Note: NH donates electrons; ortho blocked, so Br+ goes para to the nitrogen-bearing carbon.

Exam Note: Activating NH directs o/p; use the free position.

Question 46. In the compound given below, H3N+ (Y) and +NH3 (Z) are the ammonium groups and COOH is X (lysine: H3N+−CH(COOH)−(CH2)4−NH3+). The correct order of acidic nature is: (IIT 2004) (a) Z > X > Y (b) X > Y > Z (c) X > Z > Y (d) Y > X > Z

Solution. Answer: (b). The ease with which any compound or group can lose H+ is called acidic nature. Position of X is most acidic due to resonance stabilization of −COO−. (Y) is more acidic than (Z) due to −I effect of −COOH group. Order: X > Y > Z.

Teacher's Note: Carboxyl H is most acidic; ammonium nearer COOH is acidified by its −I effect.

Exam Note: Rank: COOH, then nearer NH3+, then farther.

Question 47. Which of the following resonating structures of 1-methoxy-1,3-butadiene is least stable: (IIT 2005) (a) CH3−CH−−CH=CH−O+−CH3 (b) CH2=CH−CH−−CH=O+−CH3 (c) CH2−−CH+−CH=CH−O−CH3 (d) CH2=CH−CH−−CH+−O−CH3 (charges as printed in the book)

Solution. Answer: (c). The octet of all atoms are complete in structure of options (a) and (b). In structure of option (d) electron deficiency of positively charged carbon is duly compensated by lone pair electrons of adjacent oxygen atom while such neighbour group support is not available in structure of option (c).

Teacher's Note: Least stable form has a carbocation with no octet or lone-pair help and separated charges.

Exam Note: Check octet completion and charge separation.

Question 48. What would be the product formed when 1-bromo-3-chlorocyclobutane reacts with two equivalents of metallic sodium in ether? (IIT 2005) (a) bromocyclobutane-type open structure (b) chlorocyclobutane (c) cyclobutane (d) bicyclo[1.1.0]butane

Solution. Answer: (d). This is an internal Wurtz-type reaction: 2Na → 2Na+ + 2e−; the carbanion/radical centres at C-1 and C-3 couple across the ring to give bicyclo[1.1.0]butane (a square with one diagonal bond) and this is the only obvious choice.

Teacher's Note: Intramolecular Wurtz coupling joins C-1 and C-3 across the ring forming a bicyclic compound.

Exam Note: Two Na remove both halogens; ring closes across.

Question 49. When phenyl magnesium bromide reacts with t-butanol, the product would be: (IIT 2005) (a) C6H6 (b) C6H5OH (c) t-butyl benzene (d) t-butyl phenyl ether

Solution. Answer: (a). (CH3)3C−OH + C6H5MgBr → C6H6 + (CH3)3C−OMgBr.

Teacher's Note: Grignard reagent is a strong base and abstracts the acidic hydroxyl proton to give benzene.

Exam Note: Grignard + active hydrogen gives hydrocarbon.

Question 50. When benzene sulphonic acid and p-nitrophenol are treated with NaHCO3, the gases released respectively are: (IIT 2006) (a) SO2, NO2 (b) SO2, NO (c) SO2, CO2 (d) CO2, CO2

Solution. Answer: (d). C6H5SO3H + NaHCO3 → C6H5SO3Na + CO2 + H2O; p-O2N−C6H4−OH + NaHCO3 → p-O2N−C6H4−ONa + CO2 + H2O (as printed in the book).

Teacher's Note: Both acids liberate CO2 from bicarbonate according to the book; the gas is CO2 in each case.

Exam Note: Gas from NaHCO3 with an acid is CO2.

Question 51. The correct increasing order of b.pt. of the following is: (IIT 2006) (I) 1,2-dihydroxy benzene (II) 1,3-dihydroxy benzene (III) 1,4-dihydroxy benzene (IV) Hydroxy benzene (a) I < II < III < IV (b) I < II < IV < III (c) IV < I < II < III (d) IV < II < I < III

Solution. Answer: (c). Due to chelation (intramolecular H-bonding) in I and dipole moment, the order is IV < I < II < III.

Teacher's Note: Phenol is lowest; intramolecular H-bonding in catechol lowers its boiling point relative to the other diols.

Exam Note: Intermolecular H-bonding raises boiling point.

Question 52. The product formed in the reaction CH3−CH=CH2 + NOCl → is: (IIT 2006) (a) CH3CHCl−CH2NO (b) CH3CH(NO)CH2Cl (c) CH3CH2CH(NO)Cl (d) CH2CH2CH2Cl with NO on the first carbon

Solution. Answer: (a). Follow Markownikoff addition (NO+ Cl−).

Teacher's Note: Electrophile NO+ goes to the CH2 carbon; Cl− to the more substituted carbon.

Exam Note: Apply Markovnikov with NO+ as the electrophile.

Question 53. In CH3NH2 + CHCl3 + KOH → A + KCl + H2O, A is: (IIT 2006) (a) CH3CN (b) CH3NHCH3 (c) CH3−N→C-type structure with charges drawn one way (d) CH3−N+≡C−

Solution. Answer: (d). Isocyanide test of carbylamine reaction: CH3NH2 + CHCl3 + 3KOH → CH3NC + 3KCl + 3H2O.

Teacher's Note: Primary amine with chloroform and alkali gives foul-smelling methyl isocyanide.

Exam Note: Carbylamine reaction needs a primary amine.

Question 54. The IUPAC name of C6H5COCl is: (IIT 2006) (a) Benzoyl chloride (b) Benzene chloroketone (c) Benzene carbonyl chloride (d) Chlorophenyl ketone

Solution. Answer: (c). Follow IUPAC rule.

Teacher's Note: Acyl chloride on a ring is named as ring + carbonyl chloride; benzoyl chloride is the common name.

Exam Note: IUPAC name differs from the common name.

Question 55. The reagent(s) used for the conversion BrCH2−CH2Br →(?) HC≡CH are: (IIT 2007) (a) alcoholic KOH (b) alcoholic KOH followed by NaNH2 (c) Zn/CH3OH (d) aqueous KOH followed by NaNH2

Solution. Answer: (b). Elimination of HBr by KOH gives the less reactive vinyl bromide. To eliminate HBr from vinyl bromide strong base NaNH2 is used.

Teacher's Note: Vinyl bromide resists elimination by KOH; amide base is needed for the second step.

Exam Note: Vinylic halide needs NaNH2.

Question 56. The number of structural isomers for C6H14 is: (IIT 2007) (a) 3 (b) 4 (c) 5 (d) 6

Solution. Answer: (c). n-Hexane, 2-methylpentane, 3-methylpentane, 2,2-dimethylbutane, 2,3-dimethylbutane.

Teacher's Note: Systematically shorten the main chain and place methyl groups without duplicates.

Exam Note: List all five by main chain length.

Question 57. The number of stereoisomers obtained by bromination of trans-2-butene is: (IIT 2007) (a) 1 (b) 2 (c) 3 (d) 4

Solution. Answer: (a). Anti addition of Br2 on trans alkene produces the meso compound: trans-CH3CH=CHCH3 →(Br2/CCl4) meso-2,3-dibromobutane.

Teacher's Note: Anti addition to trans alkene gives meso product only; cis would give racemic pair.

Exam Note: Trans gives meso; cis gives racemic.

Question 58. Sodium extract of aniline on treatment with FeSO4 and H2SO4 in presence of air gives a prussian blue precipitate. The blue colour is due to: (IIT 2007) (a) Fe4[Fe(CN)6]3 (b) Fe3[Fe(CN)6]2 (c) Fe4[Fe(CN)6]2 (d) Fe3[Fe(CN)6]3

Solution. Answer: (a). Na + C + N → NaCN; Fe2+ + 6CN− → [Fe(CN)6]4−; 4Fe3+ + 3[Fe(CN)6]4− → Fe4[Fe(CN)6]3.

Teacher's Note: Prussian blue is ferric ferrocyanide; balance charges 4×3 = 3×4.

Exam Note: Write Fe4[Fe(CN)6]3 with the ionic steps.

Question 59. Cyclohexene on ozonolysis followed by reaction with zinc dust and water gives compound E. Compound E on further treatment with KOH(aq.) yields compound F. Compound F is: (IIT 2007) (a) cyclopent-1-enecarbaldehyde (CHO on the ring double bond) (b) cyclopentane with CHO on the sp3 carbon next to the double bond (c) cyclopentene carboxylic acid (d) glutaric (pentane-1,5-dioic) acid

Solution. Answer: (a). Cyclohexene →(O3; Zn dust/H2O) hexanedial OHC−(CH2)4−CHO (E) →(KOH, aldol condensation) cyclopent-1-ene-carbaldehyde (F).

Teacher's Note: Reductive ozonolysis cleaves the ring to a dialdehyde; intramolecular aldol closes a five-membered ring.

Exam Note: Dialdehyde plus base gives ring via aldol.

Question 60. Among the following, the least stable resonance structure is: (IIT 2007) (a) to (d) resonance forms of CH2=CH−CH=CH−N(=O)O type (nitro-butadiene) with charges as printed in the book figure

Solution. Answer: (a). Similar charge on nearest atoms gives rise to lesser stability.

Teacher's Note: Adjacent like charges repel, destabilising the structure.

Exam Note: Look for like charges on neighbouring atoms.

Question 61. In the following reactions, the structure of major product X is: (IIT 2007) N-phenylbenzamide →(conc. HNO3/conc. H2SO4) X. (a) nitro group meta on the benzoyl ring (b) nitro group para on the N-phenyl ring (c) nitro group para on the benzoyl ring (d) nitro group meta on the N-phenyl ring

Solution. Answer: (b). The −NH group is o-, p-directing as well as an activating group whereas the C=O group is m-directing and deactivating. When two different nature groups are present in benzene ring, the o-, p-directing group predominates. Hence p-nitro on the N-phenyl ring is the major product (p-isomer major, o-isomer minor).

Teacher's Note: Ring bonded to N is activated; ring bonded to C=O is deactivated; para position is preferred over ortho.

Exam Note: Activating group controls the site of nitration.

Question 62. Which of the following on reaction with conc. NaOH followed by acidification gives the lactone (phthalide, as drawn: benzene ring fused to a five-membered lactone) as the only product? (IIT 2006) (a) methyl 2-carboxybenzoate-type (COOCH3 and COOH) (b) 2-formylbenzoic acid (COOH and CHO) (c) phthalaldehyde (two CHO) (d) phthalic acid (two COOH)

Solution. Answer: (c). o-C6H4(CHO)2 →(NaOH, Cannizzaro reaction) o-HOOC−C6H4−CH2OH →(intramolecular change; esterification) lactone (phthalide).

Teacher's Note: Intramolecular Cannizzaro gives hydroxy-acid, which cyclises to the lactone.

Exam Note: No alpha-H aldehyde gives Cannizzaro; here intramolecular.

Question 63. The major products P and Q in the reaction: benzene + ClCH2CH2CH3 →(AlCl3) P →(H3O+, O2) Q + phenol are: (IIT 2006) (a) n-propylbenzene + CH3CH2CHO (b) n-propylbenzene + CH3CHO (c) cumene (isopropylbenzene) + CH3COCH3 (d) cumene + CH3CH2CHO

Solution. Answer: (c). The primary carbocation rearranges (1,2-hydride shift) to the secondary isopropyl cation, so P = cumene. It is the cumene hydroperoxide rearrangement reaction: cumene →(O2; H3O+) phenol + acetone (Q).

Teacher's Note: Friedel-Crafts alkylation rearranges to isopropyl; cumene process then gives phenol and acetone.

Exam Note: Mention carbocation rearrangement and cumene process.

Question 64. The smallest ketone and its next homologous are reacted with NH2OH to form oximes as: (IIT 2006) (a) two different oximes (b) three different oximes (c) two oximes are optically active (d) all three oximes are optically active

Solution. Answer: (b). (CH3)2C=O + H2NOH → (CH3)2C=N−OH (one oxime). CH3COC2H5 + H2NOH → two geometrical (syn and anti) oximes. Total three different oximes.

Teacher's Note: Acetone gives one oxime; unsymmetrical butanone gives syn and anti isomers.

Exam Note: Count geometrical isomers of the unsymmetrical ketone oxime.

Question 65. What are P and Q in the reaction: 2-methylbutane →(Cl2, hν) P (C5H11Cl isomers) →(fractional distillation) Q is: (IIT 2006) (a) 6, 6 (b) 6, 4 (c) 4, 4 (d) 3, 3

Solution. Answer: (b). Chlorination gives four structural isomers: (CH3)2CClCH2CH3, (CH3)2CHCHClCH3, CH3CH(CH2Cl)CH2CH3 and (CH3)2CHCH2CH2Cl. Two of them are chiral, so P = 6 isomers in total; enantiomers cannot be separated by fractional distillation, so Q = 4 fractions.

Teacher's Note: Count all stereoisomers for P; fractional distillation separates only structural isomers, giving 4.

Exam Note: Enantiomers have identical boiling points.

Question 66. The major product of the following reaction is: (IIT 2008) 1-(1-bromoethyl)-2-fluoro-4-nitrobenzene (Me and Br on the side-chain carbon, F ortho and NO2 para ring substituents) →(PhS−Na+, dimethyl formamide). (a) side-chain Br replaced by SPh, ring F retained (b) same as (a) with the opposite configuration at the side-chain carbon (c) ring F replaced by SPh, side-chain Br retained (d) both Br and F replaced by SPh

Solution. Answer: (a). It is easier to do nucleophilic substitution on side chain halides than on aryl halides.

Teacher's Note: Benzylic C−Br undergoes SN2 readily; aryl C−F needs harsher conditions despite the nitro group.

Exam Note: Side-chain halide reacts before aryl halide.

Question 67. Hyperconjugation involves overlap of the following orbitals: (IIT 2008) (a) σ−σ (b) σ−p (c) p−p (d) π−π

Solution. Answer: (b). Hyperconjugation involves σ−p orbitals.

Teacher's Note: C−H sigma bond overlaps with an adjacent empty or partly filled p orbital.

Exam Note: Sigma-p overlap is the keyword.

Question 68. Cellulose upon acetylation with excess acetic anhydride/H2SO4 (catalytic) gives cellulose triacetate whose structure is: (IIT 2008) (a)-(d) polymer segments of β-1,4-linked glucose units; in (a) and (c) all hydroxyls are acetylated (OAc), (b) has free OH, (d) has a different linkage (as drawn in the book)

Solution. Answer: (a). Like cellulose which has β 1-4 glycosidic linkage, cellulose triacetate keeps the β-1,4 links with all three OH groups per glucose unit acetylated (OAc).

Teacher's Note: Acetylation converts all three OH per glucose unit to OAc while the β-1,4 link is unchanged.

Exam Note: Triacetate means all three OH groups esterified.

Question 69. In the following reaction sequence, the correct structures of E, F and G are: PhC(=O)−C*H2−COOH →(Heat) [E] →(I2/NaOH) [F] + [G] (* implies 13C labelled carbon, the CH2 carbon) (IIT 2008) (a)-(d): combinations of E, F, G differing in the position of the label (a) label on carbonyl carbon of E and F, G = CH3I with label (b) label on CH3 of E but on carbonyl carbon of F (c) E = PhCOC*H3, F = PhCOO−Na+ (unlabelled), G = C*HI3 (d) E = PhCOC*H3, F = PhCOONa, G = C*H3I

Solution. Answer: (c). PhCO−C*H2−COOH →(heat, −CO2) PhCO−C*H3 (E). Then PhCOC*H3 →(I2/NaOH, iodoform reaction) PhCOONa (F) + C*HI3 (G). The labelled carbon goes into iodoform.

Teacher's Note: The β-keto acid loses CO2 (the unlabelled carboxyl); the labelled CH3 becomes CHI3.

Exam Note: Track the labelled carbon through decarboxylation and iodoform.

Question 70. The correct stability order for the following species is: (IIT 2009) Four oxocarbenium cations (I) (CH3)2C+−O−CH2CH3-type, (II) CH3CH+−O−CH(CH3)2-type, (III) and (IV) as drawn in the book. (a) (II) > (IV) > (I) > (III) (b) (I) > (II) > (III) > (IV) (c) (II) > (I) > (IV) > (III) (d) (II) > (I) > (III) > (IV)

Solution. Answer: (d). (i) The cation stabilised by resonance with the oxygen lone pair and having six α-hydrogen atoms (hyperconjugation) is among the most stable. (ii) A cation with five α-hydrogen atoms. (iii) A cation stabilised by resonance but having only three α-hydrogen atoms. (iv) A cation having only two α-hydrogen atoms and no oxygen stabilisation (least stable). Stability follows resonance first, then the number of α-hydrogens. (Book order of species in the working differs from the question numbering; the option printed as correct is (d).)

Teacher's Note: Compare resonance with the oxygen lone pair first, then count hyperconjugating α-hydrogens.

Exam Note: Resonance beats hyperconjugation in ranking.

Question 71. In the following carbocation, H/CH3 that is most likely to migrate to the positively charged carbon is: (IIT 2009) CH3(1)−CH(OH)(2)−CH(3)+... as drawn: H3C(C1)−C(C2, with H and OH)−C+(C3)−C(C4, with H and CH3)−CH3(C5) (a) CH3 at C-4 (b) H at C-4 (c) CH3 at C-2 (d) H at C-2

Solution. Answer: (d). Due to H− shift from C2 to C3. The driving force is conjugation from oxygen (the new cation at C-2 is stabilised by the OH lone pair). Also the bulky group hinders the hydride shift from the other side.

Teacher's Note: Hydride shift from C-2 gives an oxygen-stabilised cation, the most stable result.

Exam Note: Migration direction: toward the more stable cation.

Question 72. The correct stability order of the following resonance structures is: (IIT 2009) (I) H2C=N+=N− (II) H2C+−N=N− (III) H2C−−N+≡N (IV) H2C−−N=N+ (charges as printed in the book) (a) (I) > (II) > (IV) > (III) (b) (I) > (III) > (II) > (IV) (c) (II) > (I) > (III) > (IV) (d) (III) > (I) > (IV) > (II)

Solution. Answer: (b). Stability of canonical form ∝ negative formal charge on the more electronegative atom; minimum distance between unlike charges. Order: (I) > (III) > (II) > (IV).

Teacher's Note: Prefer negative charge on nitrogen, complete octets and closer opposite charges.

Exam Note: Rank by charge location and charge separation.

Question 73. The total number of cyclic structural as well as stereo isomers possible for a compound with the molecular formula C5H10 is: (IIT 2009) (a) 2 (b) 4 (c) 7 (d) 6

Solution. Answer: (d). Five structural isomers: cyclopentane, methylcyclobutane, 1,1-dimethylcyclopropane, ethylcyclopropane and 1,2-dimethylcyclopropane. 1,2-Dimethylcyclopropane exists as cis and trans geometrical isomers, so the total is six.

Teacher's Note: Count ring isomers, then add cis/trans of 1,2-dimethylcyclopropane.

Exam Note: Do not forget the geometrical pair.

Question 74. Among cellulose, poly(vinyl chloride), nylon and natural rubber, the polymer in which the intermolecular force of attraction is weakest is: (IIT 2009) (a) Nylon (b) Poly (vinyl chloride) (c) Cellulose (d) Natural Rubber

Solution. Answer: (d). Natural rubber involves weak van der Waals' forces.

Teacher's Note: Elastomers have only van der Waals forces; nylon and cellulose have H-bonding.

Exam Note: Elastomer, weakest forces.

Question 75. The IUPAC name of the following compound is: (IIT 2009) benzene ring bearing OH, CN and Br (OH and CN meta to each other, Br ortho to CN and para to OH)

Solution. Answer: (b) 2-Bromo-5-hydroxybenzonitrile. Priority order is CN > OH > Br; options were (a) 4-Bromo-3-cyanophenol (b) 2-Bromo-5-hydroxybenzonitrile (c) 2-Cyano-4-hydroxybromobenzene (d) 6-Bromo-3-hydroxybenzonitrile.

Teacher's Note: CN is the principal group (benzonitrile), numbered C-1; then lowest locants for the rest.

Exam Note: Priority CN, then OH, then Br.

Question 76. The correct acidity order of the following is: (IIT 2009) (I) phenol (II) p-chlorophenol (III) benzoic acid (IV) p-methylbenzoic acid (a) (III) > (IV) > (II) > (I) (b) (IV) > (III) > (I) > (II) (c) (III) > (II) > (I) > (IV) (d) (II) > (III) > (IV) > (I)

Solution. Answer: (a). Electron-repelling group decreases the strength of aromatic carboxylic acid and phenol. Ka: benzoic acid 6.76×10−5, p-methylbenzoic acid 1.26×10−5; phenol 1.05×10−10, p-chlorophenol 4.16×10−10. So III > IV > II > I.

Teacher's Note: Carboxylic acids beat phenols; −CH3 weakens, −Cl strengthens acidity.

Exam Note: Quote Ka values to justify the order.

Question 77. In the reaction p-CH3C6H4CONH2 →((1) NaOH/Br2; (2) C6H5COCl) T, the structure of the product T is: (IIT 2010) (a) p-CH3C6H4−CO−O−CO−C6H5 (b) C6H5−NH−CO−C6H4−CH3(p) (c) p-CH3C6H4−NH−CO−C6H5 (d) p-CH3C6H4−CO−NH−CO−C6H5

Solution. Answer: (c). Hofmann bromamide: p-CH3C6H4CONH2 →((1) NaOH/Br2) p-CH3C6H4NH2; then →(C6H5COCl) p-CH3C6H4NHCOC6H5.

Teacher's Note: Hofmann degradation removes one carbon giving amine; benzoyl chloride then acylates the amine.

Exam Note: Amide loses carbonyl carbon in Hofmann rearrangement.

Question 78. The compounds P (4-hydroxybenzoic acid), Q (4-methylanisole, p-CH3C6H4OCH3) and S (phenyl benzoate) were separately subjected to nitration using HNO3/H2SO4 mixture. The major product formed in each case respectively, is: (IIT 2010) (a)-(d) sets of three nitro products differing in the position of NO2 (as drawn in the book)

Solution. Answer: (c). P: NO2 enters ortho to OH (3-nitro-4-hydroxybenzoic acid), since NO2+ attacks o-, p- with respect to OH. Q: NO2 enters ortho to OCH3 (o-, p- with respect to CH3 and OCH3 both; OCH3 dominates). S: NO2 enters para on the phenoxy ring (o-, p- with respect to −OCOC6H5).

Teacher's Note: Strongest activating group directs the nitro group; ester oxygen activates only its own ring.

Exam Note: Apply the strongest activating group rule.

Question 79. Correct structure of ethylenediaminetetraacetic acid (EDTA) is: (IIT 2010) (a) (HOOCCH2)2N−CH=CH−N(CH2COOH)2 (b) (HOOC)2N−CH2CH2−N(COOH)2 (c) (HOOCCH2)2N−CH2−CH2−N(CH2COOH)2 (d) a diamine with a branched CH2COOH chain on the carbon backbone, as drawn

Solution. Answer: (c). It is the formula of EDTA: (HOOCCH2)2NCH2CH2N(CH2COOH)2.

Teacher's Note: EDTA: ethylene bridge between two nitrogens, each carrying two CH2COOH arms.

Exam Note: Four acetic acid arms on N, ethane bridge.

Question 80. The synthesis of 3-octyne is achieved by adding a bromoalkane into a mixture of sodium amide and alkyne. The bromoalkane and alkyne respectively are: (IIT 2010) (a) BrCH2CH2CH2CH2CH3 and CH3CH2C≡CH (b) BrCH2CH2CH3 and CH3CH2CH2C≡CH (c) BrCH2CH2CH2CH2CH3 and CH3C≡CH (d) BrCH2CH2CH2CH3 and CH3CH2C≡CH

Solution. Answer: (d). CH3CH2C≡CH + NaNH2 → CH3CH2C≡C−Na+; with CH3CH2CH2CH2Br this gives CH3CH2C≡C−CH2CH2CH2CH3 (3-octyne).

Teacher's Note: Acetylide SN2 on a primary bromide; the carbons must total eight with the triple bond at C-3.

Exam Note: Total carbons 4 + 4 = 8; triple bond at C-3.

Question 81. The correct statement about the following disaccharide is: (IIT 2010) (drawn: ring (a) a six-membered methyl glycoside with CH2OH and OCH3; ring (b) a five-membered fructose-type ring with CH2OH groups) (a) Ring (a) is pyranose with α-glucosidic link (b) Ring (a) is furanose with α-glucosidic link (c) Ring (b) is furanose with α-glucosidic link (d) Ring (b) is pyranose with β-glucosidic link

Solution. Answer: (a). These are facts: the six-membered ring (a) is a pyranose carrying an α-glycosidic link.

Teacher's Note: Six-membered ring means pyranose, five-membered means furanose; the anomeric OH position fixes α or β.

Exam Note: Ring size gives pyranose or furanose.

Question 82. In the reaction anisole (C6H5OCH3) →(HBr), the products are: (IIT 2010) (a) p-bromoanisole + H2 (b) bromobenzene + CH3Br (c) bromobenzene + CH3OH (d) phenol + CH3Br

Solution. Answer: (d). C6H5−O−CH3 →(HBr) C6H5OH + CH3Br.

Teacher's Note: Protonated ether is cleaved at the alkyl group by Br−; aryl C−O bond is strong.

Exam Note: Aryl alkyl ether gives phenol plus alkyl halide.

Question 83. 2-Methylbutane →(Cl2/hν) N (isomeric products) C5H11Cl →(fractional distillation) M (isomeric products). What are N and M? (IIT 2006) (a) 6, 6 (b) 6, 4 (c) 4, 4 (d) 3, 3

Solution. Answer: (b). Chlorination of 2-methylbutane gives the isomers (I) (CH3)2CClCH2CH3, (II) (CH3)2CHCH2CH2Cl, (III)/(IV) the enantiomeric pair CH3CH(CH2Cl)CH2CH3 and (V)/(VI) the enantiomeric pair (CH3)2CHCHClCH3. In these (III)+(IV) and (V)+(VI) are enantiomers of each other. Thus total six isomers will be possible for N. Of these only four isomers will be obtained on fractional distillation without resolution because enantiomers cannot be separated by fractional distillation. Hence N = 6, M = 4.

Teacher's Note: Four structural isomers, two of them chiral, give six isomers; distillation separates only four fractions.

Exam Note: Enantiomers have identical boiling points.

Question 84. Which of the following compounds form two isomeric oximes on reacting with NH2OH? (IIT 2006) (a) R−CHO (b) R−CO−R (c) R−CO−R′ (d) HCHO

Solution. Answer: (c). An aldehyde and an unsymmetrical ketone form two isomeric oximes (syn and anti, i.e. geometrical isomers about C=N), e.g. R−C(H)=N−OH and R−CO−R′ → R(R′)C=N−OH. Note: the book states (c); an aldehyde RCHO also forms syn/anti oximes, but the printed key is (c).

Teacher's Note: C=N−OH is geometrical only when the two carbon substituents differ.

Exam Note: Unsymmetrical C=O gives syn and anti oximes.

Question 85. Which of the following reactants on reaction with conc. NaOH followed by acidification gives the following lactone (phthalide) as the product? (IIT 2006) (a) o-C6H4(COOCH3)(COOH) (b) o-C6H4(COOH)(CHO) (c) o-C6H4(CHO)(COOH) with the groups interchanged as drawn (d) o-C6H4(CHO)2

Solution. Answer: (d). o-C6H4(CHO)2 →(OH−, intramolecular Cannizzaro reaction) o-HOCH2C6H4COO− →(H+) hydroxy acid →(−H2O) lactone (phthalide).

Teacher's Note: Aldehyde without alpha-H undergoes intramolecular Cannizzaro; hydroxy acid then lactonises.

Exam Note: Same reaction as Q62; show Cannizzaro step.

Question 86. The major product of the following reaction is: (IIT 2011) phthalimide →((i) KOH; (ii) Br−C6H4−CH2Cl (p)) (a) N-(4-bromobenzyl)phthalimide (b) N-(4-chloromethylphenyl)phthalimide (c) O-(4-bromobenzyl) isoimide (lactim ether) (d) O-(4-chloromethylphenyl) isoimide

Solution. Answer: (a). The replacement of Cl is due to the formation of stable benzyl carbocation (benzylic chloride is reactive). Alternatively Cl is present in side chain and thus replaced whereas Br is attached to the benzene nucleus. Phthalimide + KOH → potassium phthalimide, which with Cl−CH2−C6H4−Br gives N-(4-bromobenzyl)phthalimide.

Teacher's Note: Gabriel-type N-alkylation: the phthalimide anion displaces benzylic chloride, not aryl bromide.

Exam Note: Benzylic halide reacts; aryl halide stays.

Question 87. Among the following compounds, the most acidic is: (IIT 2011) (a) p-nitrophenol (b) p-hydroxybenzoic acid (c) o-hydroxybenzoic acid (d) p-toluic acid

Solution. Answer: (c). Due to ortho effect: o-hydroxybenzoic acid is most acidic because its anion is highly stabilised due to strong intramolecular H-bonding. Order: (C) o-hydroxybenzoic acid (Ka = 1.0×10−3) > (B) p-hydroxybenzoic acid (2.9×10−5) > (D) p-toluic acid (1.26×10−5) > (A) p-nitrophenol (6.9×10−8).

Teacher's Note: Salicylate anion is stabilised by intramolecular H-bond; ortho effect dominates.

Exam Note: Quote Ka values and ortho effect.

Question 88. Amongst the compounds given, the one that would form a brilliant coloured dye on treatment with NaNO2 in dil. HCl followed by addition to an alkaline solution of β-naphthol is: (IIT 2011) (a) C6H5N(CH3)2 (b) C6H5NHCH3 (c) p-CH3C6H4NH2 (d) C6H5CH2CH3

Solution. Answer: (c). It is a test for the −NH2 group attached on benzene nucleus following diazotisation and coupling reaction: p-CH3C6H4NH2 →(NaNO2+HCl, 0-5°C) p-CH3C6H4N2+Cl−; this with β-naphthol in alkali (OH−, 0-5°C) gives the brilliant coloured azo dye p-CH3C6H4−N=N−(1-azo-2-naphthol).

Teacher's Note: Only a primary aromatic amine forms a stable diazonium salt that couples with β-naphthol.

Exam Note: Orange-red dye confirms primary aromatic amine.

Question 89. The major product of the following reaction is: (IIT 2011) 3,4-dihydro-2H-pyran + RCH2OH →(H+, anhydrous) (a hemiacetal / an acetal / an ether / an ester): (a) a hemiacetal (b) an acetal (c) an ether (d) an ester

Solution. Answer: (b). The enol-ether double bond is protonated to give an oxocarbenium ion, which RCH2OH attacks to give the 2-alkoxytetrahydropyran (tetrahydropyranyl ether, THP ether). Note: because of its special structure, there are two ether oxygens attached to the same carbon, making it an acetal.

Teacher's Note: Two oxygens on one carbon (O−C−O with both alkoxy) define an acetal.

Exam Note: THP ether is a cyclic acetal.

Question 90. The following carbohydrate (a six-membered ring sugar drawn as a chair with HO, H, OH, CH2OH substituents) is: (IIT 2011) (a) a ketohexose (b) an aldohexose (c) an α-furanose (d) an α-pyranose

Solution. Answer: (b). It is β-D-glucopyranose (chair, Fischer and Haworth forms agree). In β-D glucopyranose all the OH groups and CH2OH group occupy equatorial position in the most stable conformer. It is an aldohexose.

Teacher's Note: Six carbons with a latent aldehyde (anomeric carbon C-1) make an aldohexose; ring of six atoms is pyranose.

Exam Note: Glucose is an aldohexose.

Question 91. The carboxyl functional group (−COOH) is present in: (IIT 2012) (a) picric acid (b) barbituric acid (c) ascorbic acid (d) aspirin

Solution. Answer: (d). Aspirin is acetyl salicylic acid. Picric acid (2,4,6-trinitrophenol), barbituric acid (cyclic imide) and ascorbic acid (enol-lactone) have no −COOH group. Thus, only aspirin has a carboxylic group.

Teacher's Note: Picric acid is a phenol; barbituric and ascorbic acids are acidic through other groups.

Exam Note: Name does not guarantee −COOH.

Question 92. The number of aldol reaction(s) that occurs in the given transformation is: CH3CHO + 4HCHO →(conc. aq. NaOH) C(CH2OH)4 (pentaerythritol) (IIT 2012) (a) 1 (b) 2 (c) 3 (d) 4

Solution. Answer: (c). CH3CHO →((i) OH−; (ii) HCHO) HOCH2CH2CHO (aldol) →((i) OH−; (ii) HCHO) (HOCH2)2CHCHO (aldol) →((i) OH−; (ii) HCHO) (HOCH2)3CCHO (aldol); the fourth HCHO then reduces it by crossed Cannizzaro. So three aldol reactions.

Teacher's Note: Each of the three alpha-hydrogens of acetaldehyde undergoes one aldol; the last HCHO acts via Cannizzaro.

Exam Note: Count alpha-H: three aldols, then Cannizzaro.

Question 93. The number of optically active products obtained from the complete ozonolysis of the given compound is: (IIT 2012) CH3−CH=CH−C*H(CH3)−CH=CH−C*H(CH3)−CH=CH−CH3 (two stereocentres, one with H and one with CH3 drawn on wedges, as in the book) (a) 0 (b) 1 (c) 2 (d) 4

Solution. Answer: (a). Ozonolysis (O3, Zn/H2O) gives CH3CHO (achiral), OHC−CH(CH3)−CHO (achiral, two identical CHO groups) twice, and CH3CHO (achiral). All products are achiral, so none is optically active.

Teacher's Note: Each stereocentre ends up bearing two identical CHO groups after cleavage, so chirality is lost.

Exam Note: Check each fragment for a plane of symmetry.

Question 94. The major product H of the given reaction sequence is: CH3CH2COCH3 →(CN−) G →(95% H2SO4, heat) H. (IIT 2012) (a) CH3−CH=C(CH3)−COOH (b) CH3−CH=C(CH3)−CN (c) CH3CH2−C(OH)(CH3)−COOH (d) CH3−CH=C(CH3)−CONH2

Solution. Answer: (a). CH3CH2COCH3 →(CN−) CH3CH2−C(O−)(CH3)−CN, i.e. the cyanohydrin G; with 95% H2SO4 it is hydrolysed to the hydroxy acid CH3CH2C(OH)(CH3)COOH, which on heating dehydrates to CH3−CH=C(CH3)−COOH (H).

Teacher's Note: Cyanohydrin hydrolyses to hydroxy acid; heating with strong acid dehydrates the tertiary alcohol.

Exam Note: Cyanohydrin, hydrolysis, then dehydration.

Question 95. The compound that undergoes decarboxylation most readily under mild condition is: (IIT 2012) (a) cyclohexane-1,2-diyl: 2-(carboxymethyl)cyclohexane-1-carboxylic acid (b) 2-oxocyclohexane-1-carboxylic acid (c) cyclohexylidene-malonic type acid (a ring C=C(COOH) compound with COOH on the ring) (d) 2-oxocyclohexylacetic acid

Solution. Answer: (b). β-Keto acids undergo decarboxylation most easily on heating: 2-oxocyclohexane-1-carboxylic acid →(Δ) cyclohexanone + CO2.

Teacher's Note: The ketone β to COOH allows a cyclic six-membered transition state for easy CO2 loss.

Exam Note: Look for a β-keto acid.

Question 96. An organic compound A upon reacting with NH3 gives B. On heating, B gives C. C in presence of KOH reacts with Br2 to give CH3CH2NH2. A is: [JEE (Main) 2013] (a) CH3−CH(CH3)−COOH (b) CH3CH2COOH (c) CH3COOH (d) CH3CH2CH2COOH

Solution. Answer: (b). CH3CH2COOH (A) + NH3 → CH3CH2COONH4 (B) →(Δ) CH3CH2CONH2 (C) →(Br2+KOH, Hofmann bromamide reaction) CH3CH2NH2.

Teacher's Note: Hofmann degradation removes one carbon, so the amide (and the acid) has one more carbon than the amine.

Exam Note: Acid Cn gives amine Cn−1.

Question 97. Compound (A), C8H9Br, gives a white precipitate when warmed with alcoholic AgNO3. Oxidation of (A) gives an acid (B), C8H6O4. (B) easily forms anhydride on heating. Identify the compound (A). [JEE (Main) 2013] (a) p-CH3C6H4CH2Br (b) o-CH3C6H4CH2Br (c) m-CH3C6H4CH2Br (d) o-C2H5C6H4Br

Solution. Answer: (b). o-CH3C6H4CH2Br + AgNO3(alc) gives pale yellow ppt of AgBr (bromine is attached in the side chain and is replaced). Oxidation [O] gives phthalic acid (side chains are oxidised to −COOH groups), whose ortho derivative forms phthalic anhydride on heating.

Teacher's Note: Pale yellow AgBr means benzylic bromine; anhydride formation shows the two COOH are ortho.

Exam Note: AgNO3 test + oxidation + anhydride clues.

Question 98. A compound with molar mass 180 is acylated with CH3COCl to get a compound with molar mass 390. The number of amino groups present per molecule of the former compound is: [JEE (Main) 2013] (a) 4 (b) 6 (c) 2 (d) 5

Solution. Answer: (d). −NH2 →(CH3COCl, −HCl) −NHCOCH3. Presence of one −NH2 shows an increase of molar mass by 42 units (one CH3CO − 1H). Total increase = 390 − 180 = 210 units. ∴ No. of −NH2 groups in molecule = 210/42 = 5.

Teacher's Note: Each acetylation adds C2H2O = 42 u; divide total mass gain by 42.

Exam Note: Mass gain 210 / 42 = 5.

Question 99. A solution of (−)-1-chloro-1-phenylethane in toluene racemises slowly in the presence of a small amount of SbCl5, due to the formation of: [JEE (Main) 2013] (a) carbocation (b) free radical (c) carbanion (d) carbene

Solution. Answer: (a). C6H5CHCl−CH3 + SbCl5 ⇌ C6H5CH+−CH3 + SbCl6−. The attack on this planar carbocation takes place from either side and thus recombination occurs to give a racemic mixture.

Teacher's Note: Lewis acid removes Cl− forming a planar benzylic carbocation; attack from both faces racemises.

Exam Note: Planar cation gives racemisation.

Question 100. An unknown alcohol is treated with the "Lucas reagent" to determine whether the alcohol is primary, secondary or tertiary. Which alcohol reacts the fastest and by what mechanism? [JEE (Main) 2013] (a) secondary alcohol by SN2 (b) tertiary alcohol by SN2 (c) secondary alcohol by SN1 (d) tertiary alcohol by SN1

Solution. Answer: (d). (CH3)3C−OH →(Lucas reagent, SN1) (CH3)3C+Cl− (most stable 3° carbocation).

Teacher's Note: Tertiary alcohol forms the most stable carbocation, so turbidity appears immediately via SN1.

Exam Note: Lucas test: 3° fastest, SN1.

Question 101. Arrange the following compounds in order of decreasing acidity: (I) p-chlorophenol (II) p-methylphenol (III) p-nitrophenol (IV) p-methoxyphenol [JEE (Main) 2013] (a) III > I > II > IV (b) IV > III > I > II (c) II > IV > I > III (d) I > II > III > IV

Solution. Answer: (a). p-Nitrophenol is the strongest acid among all (−M, −I NO2 stabilises the phenoxide). Order: III > I > II > IV.

Teacher's Note: Electron-withdrawing groups stabilise phenoxide; donating CH3 and OCH3 weaken the acid.

Exam Note: Rank by substituent effect on the phenoxide ion.

Question 102. The order of stability of the following carbocations: (I) CH2=CH−C+H2 (II) CH3−CH2−C+H2 (III) C6H5−C+H2 is: [JEE (Main) 2013] (a) I > II > III (b) III > I > II (c) III > II > I (d) II > III > I

Solution. Answer: (b). More is the number of canonical forms, more is stability. CH2=CH−C+H2 ↔ +CH2−CH=CH2 (two forms); CH3CH2C+H2 has no resonance; the benzyl cation has four canonical forms (charge delocalised onto ortho and para ring positions). So III > I > II.

Teacher's Note: Count resonance structures: benzyl 4, allyl 2, n-propyl none.

Exam Note: More canonical forms means more stable.

Question 103. Synthesis of each molecule of glucose in photosynthesis involves: [JEE (Main) 2013] (a) 8 molecules of ATP (b) 6 molecules of ATP (c) 18 molecules of ATP (d) 10 molecules of ATP

Solution. Answer: (c). Light reaction: 12NADP + 18ADP + 12H2O →(hν) 18ATP + 12NADPH + 6O2. Dark reaction: 6CO2 + 12NADPH + 18ATP →(dark) C6H12O6 + 12NADP + 18ADP + 6H2O. Net reaction: 6CO2 + 6H2O → C6H12O6 + 6O2. One carbon atom of glucose requires 3 ATP for its synthesis in photosynthesis, so 18 ATP for glucose.

Teacher's Note: Calvin cycle uses 3 ATP per CO2 fixed; multiply by six carbons.

Exam Note: 3 ATP per carbon × 6 = 18.

Question 104. KI in acetone undergoes SN2 reaction with each of P, Q, R and S: P = CH3−Cl, Q = (CH3)2CH−Cl, R = CH2=CH−CH2−Cl (allyl chloride), S = C6H5−CO−CH2−Cl. The rates of the reaction vary as: [JEE (Advanced) I 2013] (a) P > Q > R > S (b) S > P > R > Q (c) P > R > Q > S (d) R > P > S > Q

Solution. Answer: (b). Rate of SN2 ∝ 1/steric hindrance ∝ δ+ charge on carbon ∝ stability of the transition state. In S, the C−Cl carbon carries more positive charge due to the −I effect of Cl and the electron-withdrawing C=O group, which also stabilises the transition state. So S > P > R > Q.

Teacher's Note: SN2 is fastest for unhindered carbon next to C=O; secondary halide is slowest.

Exam Note: Steric hindrance and transition-state stabilisation decide order.

Question 105. The compound that does NOT liberate CO2, on treatment with aqueous sodium bicarbonate solution, is: [JEE (Advanced) I 2013] (a) Benzoic acid (b) Benzenesulphonic acid (c) Salicylic acid (d) Carbolic acid (Phenol)

Solution. Answer: (d). Organic molecules having the −COOH group (and sulphonic acids, which are stronger acids) liberate CO2 with NaHCO3 solution: C6H5COOH + NaHCO3 → C6H5COONa + CO2↑ + H2O; C6H5SO3H and salicylic acid do likewise. Phenol + NaHCO3 → no reaction.

Teacher's Note: Phenol is weaker than carbonic acid, so bicarbonate is not decomposed.

Exam Note: Bicarbonate test distinguishes acids from phenols.

Question 106. The hyperconjugative stabilities of tert-butyl cation and 2-butene, respectively, are due to: [JEE (Advanced) I 2013] (a) σ → p (empty) and σ → π* electron delocalisations (b) σ → σ* and σ → π electron delocalisations (c) σ → p (filled) and σ → π electron delocalisations (d) p (filled) → σ* and σ → π* electron delocalisations

Solution. Answer: (a). In (CH3)3C+ the carbon showing sp2 hybridisation has one p orbital vacant, so σ → p (empty) hyperconjugation operates. In CH3−CH=CH−CH3 the hyperconjugation involves the σ bond of the CH3 group and the π bond of its nearest C, i.e. σ → π* electron delocalisation.

Teacher's Note: Cation: C−H sigma donates into empty p; alkene: sigma donates into antibonding pi*.

Exam Note: Name the donor and acceptor orbitals.

Question 107. After completion of the reactions (I and II), the organic compound(s) in the reaction mixtures is (are): [JEE (Advanced) II 2013] Reaction I: acetone (1.0 mol) →(Br2 (1.0 mol), aqueous NaOH). Reaction II: acetone (1.0 mol) →(Br2 (1.0 mol), CH3COOH). P = CH3COCH2Br, Q = CH3COCBr3, R = Br3CCOCBr3, S = BrH2CCOCH2Br, T = CH3COONa, U = CHBr3. (a) Reaction I: P and Reaction II: P (b) Reaction I: U, acetone and Reaction II: Q, acetone (c) Reaction I: T, U, acetone and Reaction II: P (d) Reaction I: R, acetone and Reaction II: S, acetone

Solution. Answer: (c). In basic medium, the halogenated ketone CH3COCH2Br is more reactive than acetone due to the −I effect of Br, so it is brominated further to CH3COCHBr2 and CH3COCBr3, which undergoes haloform cleavage with OH−/H2O to give CHBr3 (U) and CH3COO−Na+ (T); unreacted acetone remains (1 mol Br2 only). In acidic medium the reaction takes place via the enol form, which is less reactive after one Br is introduced (the enol of CH3COCH2Br is less reactive than the enol of CH3COCH3), so only monosubstitution takes place at the α-carbon giving CH3COCH2Br (P).

Teacher's Note: Base: each bromination makes next faster (haloform). Acid: enol of brominated ketone is less reactive, so mono only.

Exam Note: Base polyhalogenates; acid monohalogenates.

Question 108. The major product(s) of the following reaction is (are): [JEE (Advanced) I 2013] p-hydroxybenzenesulphonic acid →(aqueous Br2 (3.0 equivalents)) ? P = 2,6-dibromo-4-sulpho phenol with an extra Br (as drawn), Q = 2,4,6-tribromophenol, R = tribromophenol isomer as drawn, S = 2,6-dibromo-4-sulphophenol (a) P (b) Q (c) R (d) S

Solution. Answer: (b). Bromine first enters ortho to OH (2-bromo-4-sulphophenol), then the second ortho position (2,6-dibromo-4-sulphophenol). The third equivalent of Br2 displaces the SO3H group (ipso substitution, desulphonation, −HSO3+ / as HSO3Br) to give 2,4,6-tribromophenol (Q).

Teacher's Note: Sulphonic acid group is replaced (ipso) by Br because the ring is highly activated by OH.

Exam Note: Phenol with excess bromine water gives 2,4,6-tribromophenol.

Question 109. The gas leaked from a storage tank of the Union Carbide plant in Bhopal gas tragedy was: [JEE (Main) 2013] (a) Ammonia (b) Phosgene (c) Methylisocyanate (d) Methylamine

Solution. Answer: (c). CH3−N=C=O (methyl isocyanate) was leaked.

Teacher's Note: Factual: the pesticide intermediate MIC escaped in December 1984.

Exam Note: Remember formula CH3NCO.

Question 110. For the identification of β-naphthol using dye test, it is necessary to use: [JEE (Advanced) II 2014] (a) dichloromethane solution of β-naphthol (b) acidic solution of β-naphthol (c) neutral solution of β-naphthol (d) alkaline solution of β-naphthol

Solution. Answer: (d). β-Naphthol + [Ph−N≡N]+Cl− →(alkaline solution) 1-(phenylazo)-2-naphthol (red dye) + HCl. Dye formation is favoured in alkaline medium.

Teacher's Note: Alkali converts naphthol to the more reactive naphthoxide ion, which couples with the diazonium ion.

Exam Note: Coupling with phenols needs alkaline medium.

Question 111. Isomers of hexane, based on their branching, can be divided into three distinct classes as shown in the figure: (I) 2,3-dimethylbutane and 2,2-dimethylbutane (two branched methyl groups), (II) 2-methylpentane and 3-methylpentane (one methyl branch), (III) n-hexane (unbranched). The correct order of their boiling point is: [JEE (Advanced) II 2014] (a) I > II > III (b) III > II > I (c) II > III > I (d) III > I > II

Solution. Answer: (b). More the branching in an alkane, lesser will be the surface area, as the shape approaches to spherical, leading to decrease in van der Waals' forces. Therefore lesser will be the boiling point. So III > II > I.

Teacher's Note: Branching reduces surface contact and van der Waals forces, lowering boiling point.

Exam Note: n-Alkane has the highest boiling point among isomers.

Question 112. The major product in the following reaction is: [JEE (Advanced) II 2014] Cl−CH2CH2CH2−CO−CH3 (5-chloropentan-2-one) →(1. CH3MgBr, dry ether, 0°C; 2. aqueous acid) (a) CH3(CH2)3COCH3-type ketone (b) H2C=CH−CH2−C(OH)(CH3)2-type unsaturated alcohol (c) 2-methylenetetrahydrofuran (d) 2,2-dimethyltetrahydrofuran

Solution. Answer: (d). CH3MgBr adds to C=O (addition reaction) to give the alkoxide Cl−(CH2)3−C(CH3)2−OMgX, which on treatment with aqueous acid gives the alcohol; the alkoxide/alcohol oxygen displaces Cl intramolecularly to give 2,2-dimethyltetrahydrofuran.

Teacher's Note: Grignard attacks the ketone, not the alkyl chloride; the alkoxide then closes the five-membered ring.

Exam Note: Grignard adds to C=O; ring closure follows.

Question 113. The acidic hydrolysis of ether (X) shown below (trityl ether, Ph3C−OR) is fastest when: [JEE (Advanced) II 2014] Ph3C−OR →(acid) Ph3C−OH + ROH (a) one phenyl group is replaced by a methyl group (b) one phenyl group is replaced by a para-methoxyphenyl group (c) two phenyl groups are replaced by two para-methoxyphenyl groups (d) no structural change is made to X

Solution. Answer: (c). When two phenyl groups are replaced by two para-methoxy (phenyl) groups, the carbocation formed will be more stable (electron-donating OCH3 delocalises the positive charge), so hydrolysis through the carbocation is fastest.

Teacher's Note: Hydrolysis goes via the trityl carbocation; p-OCH3 groups stabilise it by +M effect.

Exam Note: Rate depends on carbocation stability.

Question 114. In the reaction shown below, the major product(s) formed is/are: [JEE (Advanced) I 2014] 3-(aminomethyl)benzamide →(acetic anhydride, CH2Cl2) product(s) (a) N-acetyl on the aliphatic CH2NH2 (amide −CONH2 unchanged) + CH3COOH (b) acetyl on the amide nitrogen (imide) with free CH2NH2 + CH3COOH (c) both nitrogens acetylated + H2O (d) ammonium acetate salt of the amine, amide acetylated

Solution. Answer: (a). Amino group (−NH2) undergoes acetylation and the amide group (−CONH2) does not undergo acylation; therefore acetic anhydride shows acetylation with the amino group only: ArCH2NH2 + (CH3CO)2O → ArCH2NHCOCH3 + CH3COOH.

Teacher's Note: Aliphatic amine is far more nucleophilic than an amide nitrogen, whose lone pair is delocalised.

Exam Note: Amine acetylates; amide does not.

Question 115. In SN2 reactions, the correct order of reactivity for the following compounds: CH3Cl, CH3CH2Cl, (CH3)2CHCl and (CH3)3CCl is: [JEE (Main) 2014] (a) CH3Cl > (CH3)2CHCl > CH3CH2Cl > (CH3)3CCl (b) CH3Cl > CH3CH2Cl > (CH3)2CHCl > (CH3)3CCl (c) CH3CH2Cl > CH3Cl > (CH3)2CHCl > (CH3)3CCl (d) (CH3)2CHCl > CH3CH2Cl > CH3Cl > (CH3)3CCl

Solution. Answer: (b). Due to more +I effect of the attached groups in (CH3)3CCl, or due to maximum crowding round the central carbon atom, SN2 is hindered (the tertiary halide favours the SN1 mechanism). Order of SN2 reactivity: CH3Cl > CH3CH2Cl > (CH3)2CHCl > (CH3)3CCl.

Teacher's Note: SN2 rate falls as alkyl substitution at the carbon increases steric crowding.

Exam Note: Methyl > 1° > 2° > 3° for SN2.

Question 116. On heating an aliphatic primary amine with chloroform and ethanolic potassium hydroxide, the organic compound formed is: [JEE (Main) 2014] (a) an alkanol (b) an alkanediol (c) an alkyl cyanide (d) an alkyl isocyanide

Solution. Answer: (d). This is the carbylamine reaction: RNH2 + CHCl3 + 3KOH(alc.) → RNC + 3KCl + 3H2O (unpleasant smell).

Teacher's Note: Carbylamine test is specific to primary amines and gives isocyanide, not cyanide.

Exam Note: Foul smell confirms primary amine.

Question 117. The most suitable reagent for the conversion of R−CH2−OH → R−CHO is: [JEE (Main) 2014] (a) KMnO4 (b) K2Cr2O7 (c) CrO3 (d) PCC (Pyridinium Chlorochromate)

Solution. Answer: (d). PCC is a milder oxidant and oxidises alcohol to aldehyde only.

Teacher's Note: Strong oxidants carry the aldehyde on to the carboxylic acid; PCC stops at the aldehyde.

Exam Note: PCC: primary alcohol to aldehyde.

Question 118. The major organic compound formed by the reaction of 1,1,1-trichloroethane with silver powder is: [JEE (Main) 2014] (a) Acetylene (b) Ethene (c) 2-Butyne (d) 2-Butene

Solution. Answer: (c). CH3−CCl3 + Cl3C−CH3 →(Ag powder) CH3C≡CCH3.

Teacher's Note: Silver abstracts all three Cl atoms (Wurtz-type), two CH3C units join to give an alkyne.

Exam Note: gem-Trihalide with Ag gives alkyne.

Question 119. Sodium phenoxide when heated with CO2 under pressure at 125°C yields a product B which on acetylation produces C: C6H5ONa + CO2 →(125°C, 5 atm) B →(H+, Ac2O) C. The major product C would be: [JEE (Main) 2014] (a) o-acetoxybenzoic acid (aspirin) (b) 2-hydroxy-diacetyl-substituted aromatic ketone (c) methyl salicylate (d) meta-acetoxybenzoic acid

Solution. Answer: (a). Kolbe-Schmitt reaction: C6H5ONa + CO2 →(125°C, 5 atm) sodium salicylate (B); on acidification and acetylation with (CH3CO)2O it gives o-CH3COO−C6H4−COOH (aspirin).

Teacher's Note: Kolbe-Schmitt carboxylates ortho to O−; acetylation of the OH gives aspirin.

Exam Note: Salicylic acid + acetic anhydride gives aspirin.

Question 120. Considering the basic strength of amines in aqueous solution, which one has the smallest pKb value? [JEE (Main) 2014] (a) (CH3)2NH (b) CH3NH2 (c) (CH3)3N (d) C6H5NH2

Solution. Answer: (a). Order of basic nature in aqueous solution on the basis of Kb: (CH3)2NH > CH3NH2 > (CH3)3N > C6H5NH2. The strongest base has the largest Kb and the smallest pKb.

Teacher's Note: In water, +I effect and solvation together make the secondary methyl amine strongest.

Exam Note: Smallest pKb means strongest base.

Question 121. For which of the following molecule significant μ ≠ 0? [JEE (Main) 2014] (i) 1,4-dihydroxybenzene (hydroquinone, O−H bonds drawn pointing in one direction) (ii) 1,4-benzenedithiol (S−H groups drawn as in the book) (iii) 1,4-dichlorobenzene (iv) 1,4-dicyanobenzene (a) Only (i) (b) (i) and (ii) (c) Only (iii) (d) (iii) and (iv)

Solution. Answer: (b) (i) and (ii). Corrected: the book's printed key is (d), but its own working shows μ ≠ 0 for (i) and (ii) (the O−H and S−H bonds are bent out of the ring axis, so the bond dipoles do not cancel) and μ = 0 for (iii) 1,4-dichlorobenzene and (iv) 1,4-dicyanobenzene (symmetrical, dipoles cancel). Hence the correct option is (b).

Teacher's Note: Linear symmetric substituents cancel dipoles; OH and SH bent groups leave a net dipole.

Exam Note: Check symmetry before adding bond dipoles.

Question 122. In the reaction, CH3COOH →(LiAlH4) A →(PCl5) B →(Alc. KOH) C, the product C is: [JEE (Main) 2014] (a) Acetaldehyde (b) Acetylene (c) Ethylene (d) Acetyl chloride

Solution. Answer: (c). CH3COOH →(LiAlH4) CH3CH2OH (A) →(PCl5) CH3CH2Cl (B) →(KOH, alc.) CH2=CH2 (C).

Teacher's Note: Reduce acid to alcohol, convert to chloride, then dehydrohalogenate with alcoholic KOH.

Exam Note: Alcoholic KOH gives elimination.

Question 123. For the estimation of nitrogen, 1.4 g of an organic compound was digested by Kjeldahl method and the evolved ammonia was absorbed in 60 mL of M/10 sulphuric acid. The unreacted acid required 20 mL of M/10 sodium hydroxide for complete neutralization. The percentage of nitrogen in the compound is: [JEE (Main) 2014] (a) 6% (b) 10% (c) 3% (d) 5%

Solution. Answer: (b). Meq. of acid (H2SO4) taken = (1/10) × 2 × 60 = 12. Meq. of acid used by NaOH = Meq. of NaOH = (1/10) × 20 = 2. ∴ Meq. of acid used by NH3 = 12 − 2 = 10 = Meq. of NH3. % of N = (Meq. of NH3 × 1.4)/(Mass of organic compound) = (10 × 1.4)/1.4 = 10%.

Teacher's Note: Back titration: acid left over subtracted from acid taken gives acid neutralised by NH3.

Exam Note: Remember H2SO4 is dibasic (n-factor 2).

Question 124. In Carius method of estimation of halogens, 250 mg of an organic compound gave 141 mg of AgBr. The percentage of bromine in the compound is: (at. mass Ag = 108; Br = 80) [JEE (Main) 2015] (a) 24 (b) 36 (c) 48 (d) 60

Solution. Answer: (a). %Br = (At. mass of Br / Molar mass of AgBr) × (mass of AgBr / mass of organic compound) × 100 = (80/188) × (141/250) × 100 = 24%.

Teacher's Note: Fraction of Br in AgBr is 80/188; apply to AgBr mass and divide by sample mass.

Exam Note: Use Br/AgBr = 80/188.

Question 125. Which of the following compounds will exhibit geometrical isomerism? [JEE (Main) 2015] (a) 1-Phenyl-2-butene (b) 3-Phenyl-1-butene (c) 2-Phenyl-1-butene (d) 1,1-Diphenyl-1-propene

Solution. Answer: (a). Cab=Cab type molecules show geometrical isomerism: C6H5CH2−CH=CH−CH3 exists as cis and trans forms.

Teacher's Note: Each double-bond carbon must carry two different groups; only 1-phenyl-2-butene qualifies.

Exam Note: Check both alkene carbons for two different groups.

Question 126. Which compound would give 5-keto-2-methyl hexanal upon ozonolysis? [JEE (Main) 2015] (a) 1,2-dimethylcyclopentene (b) 1,4-dimethylcyclopentene with one CH3 on the double-bond carbon and the other on the ring carbon next to the other alkene carbon (c) 1,3-dimethylcyclopentene with CH3 at the sp3 carbon opposite (d) 1,3-dimethylcyclopentene with the CH3 on the double-bond carbon and another on the ring carbon (as drawn in the book)

Solution. Answer: (b). The cyclopentene ring C1(CH3)=C2H−C3H(CH3)−C4H2−C5H2 →(O3; Zn/H2O) CH3−CO−CH2−CH2−CH(CH3)−CHO, which is 5-keto-2-methylhexanal.

Teacher's Note: Ozonolysis opens the ring; the substituted alkene carbon becomes the ketone and the CH carbon the aldehyde.

Exam Note: Reverse the ozonolysis by joining C=O carbons.

Question 127. The synthesis of alkyl fluorides is best accomplished by: [JEE (Main) 2015] (a) Free radical fluorination (b) Sandmeyer's reaction (c) Finkelstein reaction (d) Swart's reaction

Solution. Answer: (d). R−I + AgF → R−F + AgI. This is Swart's reaction to prepare alkyl fluorides more conveniently by heating chloro or bromo alkane with inorganic fluorides.

Teacher's Note: Direct fluorination is violent; Swart's reaction uses AgF or Hg2F2 on alkyl halides.

Exam Note: Swart = metal fluoride halogen exchange.

Question 128. In the following sequence of reactions, toluene →(KMnO4) A →(SOCl2) B →(H2/Pd, BaSO4) C, the product C is: [JEE (Main) 2015] (a) C6H5COOH (b) C6H5CH3 (c) C6H5CH2OH (d) C6H5CHO

Solution. Answer: (d). Toluene →(KMnO4) benzoic acid [A] →(SOCl2) benzoyl chloride [B] →(H2/Pd, BaSO4, Rosenmund reduction) benzaldehyde [C].

Teacher's Note: Poisoned Pd/BaSO4 stops reduction of the acid chloride at the aldehyde stage.

Exam Note: Name the Rosenmund reaction.

Question 129. In the reaction, p-toluidine (4-methylaniline) →(NaNO2/HCl, 0-5°C) D →(CuCN/KCN, Δ) E + N2, the product E is: [JEE (Main) 2015] (a) p-CH3C6H4COOH (b) 4,4′-dimethylbiphenyl (c) p-CH3C6H4CN (d) toluene

Solution. Answer: (c). p-CH3C6H4NH2 →(NaNO2/HCl, 0-5°C) p-CH3C6H4N2Cl (D) →(CuCN/KCN, Sandmeyer reaction) p-CH3C6H4CN (E) + N2.

Teacher's Note: Diazonium group is replaced by CN in the Sandmeyer reaction; methyl stays para.

Exam Note: Sandmeyer: CuCN replaces N2+.

Question 130. Which polymer is used in the manufacture of paints and lacquers? [JEE (Main) 2015] (a) Bakelite (b) Glyptal (c) Polypropene (d) Poly vinyl chloride

Solution. Answer: (b). Glyptal is used in the manufacture of paints and lacquers.

Teacher's Note: Glyptal is the polyester of glycerol and phthalic acid.

Exam Note: Glyptal: paints and lacquers.

Question 131. Which of the vitamins given below is water soluble? [JEE (Main) 2015] (a) Vitamin C (b) Vitamin D (c) Vitamin E (d) Vitamin K

Solution. Answer: (a). Vitamins B and C are water soluble. Vitamins A, D, E, K are water insoluble (fat soluble).

Teacher's Note: Fat-soluble vitamins are A, D, E, K; B-complex and C dissolve in water.

Exam Note: Remember ADEK are fat soluble.

Question 132. Which of the following compounds is not an antacid? [JEE (Main) 2015] (a) Aluminium hydroxide (b) Cimetidine (c) Phenelzine (d) Ranitidine

Solution. Answer: (c). Phenelzine is an antidepressant (a tranquilizer) and not an antacid. The rest are all antacids (acid-reducing agents).

Teacher's Note: Cimetidine and ranitidine block histamine H2 receptors; phenelzine is an MAO inhibitor.

Exam Note: Phenelzine belongs to antidepressants.

Question 133. The major product of the following reaction is: [JEE (Advanced) I 2015] 2-(3-oxopentyl)cyclohexanone →(I. KOH, H2O; II. H+, heat) (a) bicyclic enone (octalone) with CH3 on the alkene carbon next to the carbonyl-bearing ring (b) isomeric bicyclic ketone with the CH3 on the saturated carbon (c) spiro compound (d) cyclobutane-fused ketone (as drawn in the book)

Solution. Answer: (a). Mechanism: OH− removes an α-H from the CH2 next to the side-chain ketone; the resulting enolate attacks the ring C=O intramolecularly (aldol) to give the β-hydroxy ketone, which on heating with acid loses H2O to give the conjugated bicyclic enone (aldol condensation product) with CH3 on the double bond (Robinson-annulation type).

Teacher's Note: Intramolecular aldol forms a six-membered ring; dehydration gives the conjugated bicyclic enone.

Exam Note: Six-membered ring closes preferentially.

Question 134. In the following reaction, the major product is: [JEE (Advanced) I 2015] 2-methyl-1,3-butadiene (isoprene) →(1 equivalent HBr) (a) CH2=C(CH3)−CH(Br)−CH3 (b) (CH3)2C(Br)−CH=CH2 (c) CH2=C(CH3)−CH2CH2Br (d) (CH3)2C=CH−CH2Br

Solution. Answer: (d). H+ adds to C-1 giving the allylic tertiary carbocation (CH3)2C+−CH=CH2 ↔ (CH3)2C=CH−CH2+. Br− attack gives (CH3)2CBr−CH=CH2 (1,2-addition, major at low temperature) and (CH3)2C=CH−CH2Br (1,4-addition, major product at room temperature, thermodynamic product).

Teacher's Note: Room temperature favours the more stable, more substituted alkene (1,4-adduct); low temperature gives 1,2.

Exam Note: Temperature decides 1,2 versus 1,4 addition.

Question 135. The structure of D-(+)-glucose is CHO−(H,OH)−(HO,H)−(H,OH)−(H,OH)−CH2OH (Fischer projection, top to bottom: OH right, left, right, right). The structure of L-(−)-glucose is: [JEE (Advanced) I 2015] (a) CHO; OH left; OH right; OH left; OH left; CH2OH (b) CHO; OH right; OH left; OH right; OH left; CH2OH (c) CHO; OH left; OH left; OH right; OH left; CH2OH (d) CHO; OH left; OH left; OH left; OH right; CH2OH

Solution. Answer: (a). L-(−)-Glucose is the enantiomer (mirror image) of D-(+)-glucose, so every OH is on the opposite side: CHO; HO−H (left); H−OH (right); HO−H (left); HO−H (left); CH2OH.

Teacher's Note: Enantiomer in Fischer projection: reverse every stereocentre, including the configurational C-5.

Exam Note: Mirror image means all OH positions flipped.

Question 136. The major product of the reaction (S)-leucine, (CH3)2CH−CH2−CH(NH2)−CO2H →(NaNO2, aqueous HCl, 0°C) is: [JEE (Advanced) I 2015] (a) an amino-alcohol with CH2OH-type carbon, NH2 retained (b) the hydroxy acid with the OH in the inverted configuration (c) the hydroxy acid (S)-2-hydroxy-4-methylpentanoic acid with the OH in the same spatial arrangement as the original NH2 (d) an amino alcohol with OH

Solution. Answer: (c). NaNO2 + HCl → HNO2 + NaCl; HNO2 + HCl → H2NO2+, giving NO+. The amino group becomes a diazonium ion, R−N2+. The neighbouring carboxylate ion attacks from the backside, displacing N2 (neighbouring group participation) to give a cyclic α-lactone; water then attacks from the backside with respect to the leaving group in the cyclic ester. Two backside attacks lead to retention of configuration: the product is the (S)-hydroxy acid.

Teacher's Note: Two successive inversions (carboxylate, then water) retain configuration at the stereocentre.

Exam Note: Name the neighbouring group participation.

Question 137. The major product U in the following reactions is: [JEE (Advanced) II 2015] benzene →(CH2=CH−CH3, H+, high pressure, heat) T →(radical initiator, O2) U (a) PhCH(OOH)CH2CH3 (b) PhC(CH3)2−O−O−H (c) PhCH(OOH)−CH=CH2 (d) PhC(=CH2)CH2OOH

Solution. Answer: (b). Propene + H+ → CH3−C+H−CH3, which attacks benzene (Friedel-Crafts alkylation) to give T = cumene, C6H5CH(CH3)2. Cumene →(O2, oxygen is inserted by radical mechanism) cumene hydroperoxide, C6H5−C(CH3)2−O−O−H (U).

Teacher's Note: Radical oxidation occurs at the weakest, tertiary benzylic C−H bond of cumene.

Exam Note: Cumene process step 1: hydroperoxide.

Question 138. In the following reaction, the major product W is: [JEE (Advanced) II 2015] aniline →(NaNO2, HCl, 0°C) V →(β-naphthol, NaOH) W (a) 1-(phenylazo)-2-naphthol (b) 4-(phenylazo)-2-naphthol type with azo at a different ring position (c) azo-naphthol with azo on the other ring (d) another positional isomer

Solution. Answer: (a). NaNO2 + HCl → HNO2 + NaCl; HNO2 + HCl → H2NO2+ + Cl− → H2O + NO+. Aniline with NO+ gives benzenediazonium ion V (diazotisation). For β-naphthol, the α position (C-1) is the attacking site for the electrophile, so coupling gives the red-coloured azo dye W, 1-phenylazo-2-naphthol (diazo coupling).

Teacher's Note: Coupling of β-naphthol occurs at C-1, ortho to OH, in alkaline medium.

Exam Note: Diazotisation then coupling at the alpha position.

Question 139. In the following reactions, the product S is: [JEE (Advanced) II 2015] 5-methylindene (methyl on the benzene ring) →(I. O3; II. Zn/H2O) R →(NH3) S (a)-(d): methylisoquinolines and methylquinolines, differing in the position of CH3 and of the ring nitrogen (as drawn in the book)

Solution. Answer: (a). Ozonolysis of the cyclopentene double bond opens the five-membered ring to give the dialdehyde o-OHC−C6H3(CH3)−CH2−CHO (R). With NH3 (Pauli-Knorr type reaction) the CH2CHO group forms an imine (C=NH), which tautomerises to an enamine; it condenses with the neighbouring CHO (−H2O) to close the pyridine ring, giving the methyl-substituted isoquinoline (S) of option (a).

Teacher's Note: The dialdehyde condenses with ammonia, closing a six-membered N-heterocycle: isoquinoline, not quinoline.

Exam Note: Name the product type: isoquinoline.

Question 140. 2-Chloro-2-methylpentane on reaction with sodium methoxide in methanol yields: [JEE (Main) 2016] (1) C3H7−C(CH3)2−OCH3 (2) C3H7−C(CH3)=CH2 (3) C2H5CH=C(CH3)2 (a) (1) and (3) (b) (3) only (c) (1) and (2) (d) All of these

Solution. Answer: (d). Tertiary halides predominantly show E2 reactions: CH3−CCl(CH3)−CH2−CH2−CH3 →(MeONa/MeOH) CH3−C(CH3)=CH−CH2−CH3 (90%, Saytzeff) + CH2=C(CH3)−CH2CH2CH3 (9-10%) + CH3−C(OCH3)(CH3)−CH2CH2CH3 (about 1%, substitution). Elimination reactions predominate over substitution and thus all the products are possible.

Teacher's Note: Tertiary halide with strong base mainly eliminates, but traces of substitution ether and the Hofmann alkene also form.

Exam Note: All three products appear; Saytzeff alkene is major.

Question 141. Which of the following statements about low density polythene is FALSE? [JEE (Main) 2016] (a) It is a poor conductor of electricity (b) Its synthesis requires dioxygen or a peroxide initiator as a catalyst (c) It is used in the manufacture of buckets, dust-bins etc. (d) Its synthesis requires high pressure

Solution. Answer: (c). Buckets, dustbins are manufactured by high density polythene, not by low density polythene, so statement (c) is false.

Teacher's Note: LDPE is soft and flexible (films, bags); rigid articles like buckets use HDPE.

Exam Note: LDPE films; HDPE buckets.

Question 142. The distillation technique most suited for separating glycerol from spent-lye in the soap industry is: [JEE (Main) 2016] (a) fractional distillation (b) steam distillation (c) distillation under reduced pressure (d) simple distillation

Solution. Answer: (c). Glycerol, being a high boiling point liquid (290°C), is made to boil at lower temperature by lowering pressure on its surface, i.e., at reduced pressure. Glycerol is therefore separated from spent-lye by distillation under reduced pressure without decomposition. Note that glycerol decomposes at its boiling point.

Teacher's Note: Reduced pressure lowers the boiling point so glycerol distils before it decomposes.

Exam Note: Use for liquids that decompose near their boiling point.

Question 143. The absolute configuration of the compound drawn as a Fischer projection (top to bottom: CO2H; H left, OH right; H left, Cl right; CH3) is: [JEE (Main) 2016] (a) (2S, 3R) (b) (2S, 3S) (c) (2R, 3R) (d) (2R, 3S)

Solution. Answer: (a) (2S, 3R). Carbon numbers 2 and 3 are chiral. On the 2nd carbon the two vertical positions are attached to carbon (CHClCH3 and COOH) and the horizontal positions to OH and H. O has higher priority than H. On the 3rd carbon the two vertical positions are attached to carbon [CH(OH)(COOH) and CH3] and the horizontal positions to H and Cl; Cl has higher priority than H. The 2nd carbon seems to be R, but H is on the horizontal position and thus S. The 3rd carbon seems to be S, but H is on the horizontal position and thus R.

Teacher's Note: In a Fischer projection the horizontal groups point toward you, so reverse the apparent R/S.

Exam Note: Assign priorities, trace 1→2→3, reverse for horizontal H.

Question 144. The concentration of fluoride, lead, nitrate and iron in a water sample from an underground lake was found to be 1000 ppb, 40 ppb, 100 ppm and 0.2 ppm, respectively. This water is unsuitable for drinking due to high concentration of: [JEE (Main) 2016] (a) Lead (b) Nitrate (c) Iron (d) Fluoride

Solution. Answer: (b). The highest concentration of nitrate (100 ppm) is reported. Standards (BIS / NCERT): lead 15 ppb / 50 ppb; nitrate 50 ppm / 50 ppm; so nitrate (100 ppm) exceeds the limit. Note: the book remarks that there may be two answers according to ISB environmental pollution norms.

Teacher's Note: Compare each value with its permissible limit: only nitrate (100 ppm vs 50 ppm) clearly exceeds it.

Exam Note: Convert units before comparing with limits.

Question 145. Thiol group is present in: [JEE (Main) 2016] (a) Cystine (b) Cysteine (c) Methionine (d) Cytosine

Solution. Answer: (b). Cysteine, HS−CH2−CH(NH2)−COOH, has the −SH (thiol) group. Cystine has a disulphide (−S−S−) link, methionine a thioether (CH3−S−), and cytosine is a nitrogen base.

Teacher's Note: Thiol means free −SH; cystine is the oxidised disulphide dimer of cysteine.

Exam Note: Cysteine has −SH; cystine has S−S.

Question 146. In the Hofmann bromamide degradation reaction, the number of moles of NaOH and Br2 used per mole of amine produced are: [JEE (Main) 2016] (a) four moles of NaOH and two moles of Br2 (b) two moles of NaOH and two moles of Br2 (c) four moles of NaOH and one mole of Br2 (d) one mole of NaOH and one mole of Br2

Solution. Answer: (c). RCONH2 + Br2 + 4NaOH → R−NH2 + Na2CO3 + 2NaBr + 2H2O. 1 mole bromine and 4 moles of NaOH are used for one mole of amine produced.

Teacher's Note: Balanced equation: 4 NaOH (two for HBr, two to form Na2CO3 from CO2) and 1 Br2.

Exam Note: Learn the balanced Hofmann equation.

Question 147. The reaction of propene with HOCl (Cl2 + H2O) proceeds through the intermediate: [JEE (Main) 2016] (a) CH3−CH+−CH2−Cl (b) CH3−CH(OH)−CH2+ (c) CH3−CHCl−CH2+ (d) CH3−CH+−CH2−OH

Solution. Answer: (a). The reaction proceeds through formation of the carbonium ion CH3−C+H−CH2−Cl (Cl+ adds first to the terminal carbon, giving the more stable secondary cation), which is then attacked by water to give propylene chlorohydrin CH3CH(OH)CH2Cl.

Teacher's Note: Electrophilic Cl+ adds to the terminal carbon, leaving the secondary carbocation.

Exam Note: Markovnikov: positive charge on the more substituted carbon.

Question 148. The product of the reaction given below is: 4-tert-butylcyclohexene →(1. NBS/hν; 2. H2O/K2CO3) X [JEE (Main) 2016] (a) the allylic alcohol (OH on the ring carbon next to the double bond, alkene retained) (b) the corresponding cyclohexenone (c) the corresponding carboxylic acid (d) the diene

Solution. Answer: (a). NBS/hν brominates the allylic position via the resonance-stabilised allyl radical (two allylic bromides: Br at C-3 and C-5 of the ring); then H2O/K2CO3 hydrolyses the allylic bromide to the allylic alcohol(s), keeping the double bond.

Teacher's Note: NBS gives allylic bromination via an allylic radical; mild aqueous base then replaces Br by OH.

Exam Note: NBS = allylic bromination, not addition.

Question 149. On complete hydrogenation, natural rubber produces: [JEE (Advanced) I 2016] (a) ethylene-propylene copolymer (b) vulcanised rubber (c) polypropylene (d) polybutylene

Solution. Answer: (a). Natural rubber (cis-polyisoprene) →(H2/Ni) a saturated polymer whose repeating unit corresponds to alternating CH2=CH2 (ethylene) and CH2=CH−CH3 (propylene): an ethylene-propylene copolymer.

Teacher's Note: Saturating each isoprene unit gives −CH2CH(CH3)CH2CH2−, i.e. alternating propylene and ethylene units.

Exam Note: Hydrogenated polyisoprene resembles EPM rubber.

Question 150. The product(s) of the following reaction sequence is(are): aniline →((i) acetic anhydride/pyridine; (ii) KBrO3/HBr; (iii) H3O+, heat; (iv) NaNO2/HCl, 273-278 K; (v) Cu/HBr) [JEE (Advanced) I 2016] (a) 1,3-dibromobenzene (b) 1,4-dibromobenzene (c) 1,2,3-tribromobenzene (d) 1,3,5-tribromobenzene

Solution. Answer: (b). Aniline →(Ac2O/pyridine, acetylation) acetanilide →(KBrO3/HBr; BrO3− + 5Br− + 6H+ → 3Br2 + 3H2O) p-bromoacetanilide →(H3O+, Δ) p-bromoaniline →(NaNO2/HCl, 273-278 K, diazotisation) p-bromobenzenediazonium chloride →(Cu/HBr, Gattermann) 1,4-dibromobenzene.

Teacher's Note: Acetylation moderates NH2 so bromination stops at para mono-substitution; diazonium then swaps for Br.

Exam Note: Protect the amine to avoid tribromination.

Question 151. The major product of the following reaction sequence is: [JEE (Advanced) II 2016] isobutyrophenone, PhCO−CH(CH3)2 →((i) HCHO (excess)/NaOH, heat; (ii) HCHO/H+ (catalytic amount)) (a) a 1,3-dioxane (cyclic acetal) bearing the phenyl-substituted diol carbon (b) the open-chain hydroxy ketone ether PhCO−C(CH3)2−O−CH2OH-type (c) the 1,3-dioxane carrying an OH on the phenyl-bearing carbon (d) a hydroxy ketone with an additional ring OH

Solution. Answer: (a). PhCO−CH(CH3)2 →(HCHO/OH−, cross aldol condensation) PhCO−C(CH3)2−CH2OH →(HCHO/OH−, cross Cannizzaro reaction) the ketone is reduced to the diol PhCH(OH)−C(CH3)2−CH2OH + HCOOH →(HCHO/H+, nucleophilic addition) the 1,3-diol is protected as a cyclic acetal (4-phenyl-5,5-dimethyl-1,3-dioxane).

Teacher's Note: Excess HCHO: aldol, then crossed Cannizzaro reduces C=O to CHOH; catalytic acid forms the cyclic acetal.

Exam Note: Name each step: aldol, crossed Cannizzaro, acetal formation.

Question 152. The correct order of acidity for the following compounds is: (I) 2,6-dihydroxybenzoic acid (II) salicylic acid (2-hydroxybenzoic acid) (III) 3-hydroxybenzoic acid (IV) 4-hydroxybenzoic acid [JEE (Advanced) II 2016] (a) I > II > III > IV (b) III > I > II > IV (c) III > IV > II > I (d) I > III > IV > II

Solution. Answer: (a). Ortho substituted benzoic acid is more acidic than meta and para isomers due to ortho effect. Or, the conjugate base of ortho hydroxybenzoic acid is more acidic than its meta and para isomers due to strong H-bonding. Two ortho OH groups (I) stabilise the carboxylate most, so I > II > III > IV.

Teacher's Note: Ortho OH H-bonds to carboxylate; two ortho OH groups give the strongest effect, para the weakest.

Exam Note: Ortho effect first, then meta over para.

Question 153. Which of the following compounds will form significant amount of meta product during mono-nitration reaction? [JEE (Main) 2017] (a) phenol (b) phenyl acetate (c) aniline (d) acetanilide

Solution. Answer: (c). In strongly acidic nitrating mixture, aniline is protonated to the anilinium ion, C6H5NH3+, which is a meta directing and deactivating group. Products: m-nitroaniline (51%), p-nitroaniline (47%) and o-nitroaniline (2%).

Teacher's Note: Anilinium ion is meta-directing; nitration of aniline therefore gives a large meta fraction.

Exam Note: Protect NH2 (acetylate) to avoid meta product.

Question 154. The increasing order of the reactivity of the following halides for the SN1 reaction is: (i) CH3CH(Cl)CH2CH3 (ii) CH3CH2CH2Cl (iii) p-H3CO−C6H4−CH2Cl [JEE (Main) 2017] (a) (iii) < (ii) < (i) (b) (ii) < (i) < (iii) (c) (i) < (iii) < (ii) (d) (ii) < (iii) < (i)

Solution. Answer: (b). Rate of SN1 reaction = stability of carbocation. (i) gives a 2° carbocation CH3−C+H−CH2CH3; (ii) gives a 1° carbocation CH3CH2C+H2; (iii) gives a 1° benzylic carbocation involving the ring, strongly stabilised by p-OCH3. Increasing stability of carbocation is II < I < III.

Teacher's Note: Rank carbocations: primary alkyl < secondary alkyl < benzylic with p-OCH3 (resonance).

Exam Note: SN1 rate follows carbocation stability.

Question 155. The formation of which of the following polymers involves hydrolysis reaction? [JEE (Main) 2017] (a) Nylon 6 (b) Bakelite (c) Nylon 6,6 (d) Terylene

Solution. Answer: (a). Caprolactam is hydrolysed to produce caproic acid (6-aminohexanoic acid, H2N−(CH2)5−COOH), which on heating undergoes condensation polymerisation to produce nylon-6.

Teacher's Note: Nylon-6 starts by ring-opening hydrolysis of caprolactam; the others are straight condensation polymers.

Exam Note: Hydrolysis step precedes polymerisation for Nylon-6.

Question 156. Which of the following, upon treatment with tert-BuONa followed by addition of bromine water, fails to decolourize the colour of bromine? [JEE (Main) 2017] (a) 1-(bromomethoxy)cyclohexane, C6H11−O−CH2Br (b) C6H5CH2CHBrC6H5 (c) C6H5−O−CH(CH3)Br (d) cyclohexyl−CO−CH(CH3)Br

Solution. Answer: (a). (a) C6H11OCH2Br + tert-BuONa → C6H11OCH2O−tBu (substitution product, no C=C; it fails to decolourise bromine). (b) gives C6H5CH=CHC6H5 by elimination; (c) gives C6H5OCH=CH2; (d) gives cyclohexyl−CO−CH=CH2. All these alkenes decolourise bromine water due to unsaturation.

Teacher's Note: Bromine water is decolourised only by C=C; the bromo-ether has no β-hydrogen, so it substitutes instead of eliminating.

Exam Note: No β-H means no elimination, no alkene.

Question 157. 3-Methylpent-2-ene on reaction with HBr in presence of peroxide forms an addition product. The number of possible stereoisomers for the product is: [JEE (Main) 2017] (a) six (b) zero (c) two (d) four

Solution. Answer: (d). CH3−CH=C(CH3)−CH2−CH3 →(HBr, R2O2) CH3−C*HBr−C*H(CH3)−CH2CH3, the anti-Markovnikov product (X), which contains two chiral centres (*) and is unsymmetrical. Thus, total stereoisomers = 22 = 4.

Teacher's Note: Peroxide effect puts Br on C-2; product has two different stereocentres, so 22 isomers.

Exam Note: n stereocentres, unsymmetrical: 2n.

Question 158. The correct sequence of reagents for the following conversion will be: 4-oxocyclohexane-1-carbaldehyde → 4-(2-hydroxypropan-2-yl)-1-methylcyclohexan-1-ol [JEE (Main) 2017] (a) [Ag(NH3)2]+OH−, H+/CH3OH, CH3MgBr (b) CH3MgBr, H+/CH3OH, [Ag(NH3)2]+OH− (c) CH3MgBr, [Ag(NH3)2]+OH−, H+/CH3OH (d) [Ag(NH3)2]+OH−, CH3MgBr, H+/CH3OH

Solution. Answer: (a). The CHO is first oxidised by Tollens' reagent [Ag(NH3)2]+OH− to COOH (the ketone is untouched); H+/CH3OH esterifies it to COOCH3; then CH3MgBr (3 moles), followed by H2O, converts the ketone to the tertiary alcohol C(OH)CH3 and the ester to C(OH)(CH3)2.

Teacher's Note: Oxidise the aldehyde, then esterify so the acidic COOH does not quench the Grignard; Grignard last.

Exam Note: Order matters: protect/convert acid before Grignard.

Question 159. Which of the following compounds will behave as a reducing sugar in an aqueous KOH solution? [JEE (Main) 2017] (a) a furanose with an acetyl ester (OCOCH3) at the anomeric carbon (b) the free-OH furanose (c) the methyl furanoside (OCH3 at anomeric carbon) (d) a pyranose methyl ether at C-6 (CH2OCH3) with free ring OH groups (as drawn in the book)

Solution. Answer: (a). Sugars having a free anomeric −OH group are reducing sugars. In aqueous KOH, the acetate ester of (a) is hydrolysed (−OCOCH3 → −OH + CH3COOK), giving the free anomeric group at the 2nd carbon, so it behaves as a reducing sugar.

Teacher's Note: Base hydrolyses the anomeric ester to a free hemiketal OH, restoring reducing character; ethers and glycosides do not.

Exam Note: Acetal/glycoside forms (OR) are non-reducing.

Question 160. The major product obtained in the following reaction is: (+)-1-bromo-1,3-diphenylpropane-type compound C6H5CHBr−CH2−C6H5 (as drawn, one enantiomer) →(t-BuOK, Δ) [JEE (Main) 2017] (a) (±)C6H5CH(OtBu)CH2C6H5 (b) C6H5CH=CHC6H5 (c) (+)C6H5CH(OtBu)CH2C6H5 (d) (−)C6H5CH(OtBu)CH2C6H5

Solution. Answer: (b). The bulky strong base t-BuOK with heat brings about E2 elimination (anti-periplanar H and Br) giving the conjugated trans alkene C6H5CH=CHC6H5 (1,2-diphenylethene) as the major product.

Teacher's Note: Bulky strong base eliminates rather than substitutes; conjugation with both phenyls favours the trans alkene.

Exam Note: t-BuOK means E2 elimination.

Question 161. Which of the following molecules is least resonance stabilized? [JEE (Main) 2017] (a) benzene (b) furan (c) pyridine (d) 4,4-dimethylcyclohexa-2,5-dienone

Solution. Answer: (d). All are stabilised by resonance. The first three, being aromatic, are more stabilised. The fourth one, being non-aromatic, is least stabilised.

Teacher's Note: Aromatic rings gain extra stabilisation; the cross-conjugated dienone is not aromatic.

Exam Note: Aromaticity means extra resonance energy.

Question 162. The major product obtained in the following reaction is: bicyclic lactone (cyclopentene-fused γ-lactone carrying a COOH group) →(DIBAL-H) [JEE (Main) 2017] (a) hydroxy aldehyde with the COOH retained (b) hydroxy dialdehyde: ring OH, CH2CHO side chain and CHO in place of COOH (c) aldehyde with COOH retained and no OH (d) dialdehyde without OH

Solution. Answer: (b). DIBAL-H is a reducing agent and reduces cyanides, esters, amides, lactones and carboxylic acids into the corresponding aldehydes, so the lactone gives the CH2CHO side chain with a free ring OH and the COOH becomes CHO (as printed in the book).

Teacher's Note: DIBAL-H stops at the aldehyde stage for the lactone and the acid group alike, per the book.

Exam Note: DIBAL-H: partial reduction to aldehyde.

Question 163. The major product of the following reaction is: 2′-amino-biphenyl-3-ol (NH2 on one ring ortho to the biaryl bond, OH meta on the other ring) →((i) NaNO2, HCl, 0°C; (ii) aq. NaOH) [JEE (Advanced II) 2017] (a) a cyclic azo compound (benzo[c]cinnoline) with the OH at a position adjacent to the ring junction (b) the sodium phenoxide of the diazonium chloride (c) the cyclic azo compound benzo[c]cinnoline carrying OH at the position para to the biaryl bond as drawn (d) the aryl chloride

Solution. Answer: (c). NaNO2/HCl at 0°C converts NH2 to the diazonium chloride (N2+Cl−). Aqueous NaOH converts the phenol to phenoxide, which is attacked intramolecularly (intramolecular diazo coupling) by the diazonium group at the position para to the O−, closing the ring to the hydroxy-substituted benzo[c]cinnoline (cyclic azo compound).

Teacher's Note: Intramolecular azo coupling at the position para to phenoxide closes a six-membered N=N ring.

Exam Note: Diazo coupling goes para to the activating O−.

Question 164. The order of basicity among the following compounds is: (I) acetamidine CH3−C(=NH)NH2 (II) 2-imidazoline (4,5-dihydroimidazole) (III) imidazole (IV) guanidine, H2N−C(=NH)−NH2 [JEE (Advanced II) 2017] (a) II > I > IV > III (b) IV > II > III > I (c) I > IV > III > II (d) IV > I > II > III

Solution. Answer: (d). Resonance with two −NH2 groups in guanidine (IV) increases the electron density on the N of =NH. In (I) there is a lesser increase of electron density on =NH due to only one resonance with one −NH2. In (II) the lone pair of NH is not involved in aromaticity, so it is more available; the basic N is bonded to sp3 C on one side. In imidazole (III) the lone pair of NH is used in the aromatic sextet and the other N is sp2, thus it is least basic. Order: IV > I > II > III.

Teacher's Note: Guanidine's conjugate acid is stabilised by three N atoms; imidazole's basic N is sp2 in an aromatic ring.

Exam Note: Compare conjugate-acid resonance stabilisation.

Objective Problems (More Than One Answer Correct)

Question M1. Select the correct statements: (a) A compound having enantiomers must be chiral (b) A compound having enantiomers must have chiral centres (c) Mirror image molecules are always enantiomers (d) 2,3-Pentadiene has two enantiomers

Solution. Answer: (a), (c), (d). 2,3-Pentadiene (CH3CH=C=CHCH3) has two stereo-axes, i.e. its terminal carbons C1 and C3 carry two different groups each, but it has no chiral centres: it exists as two non-superimposable mirror-image forms. So (b) is false.

Teacher's Note: Chirality can arise from an axis (allenes), not only from a stereocentre.

Exam Note: Chiral molecule means enantiomers; centre not compulsory.

Question M2. Select the correct statements: (a) All asymmetric carbons are stereocentres (b) A compound with open chain structure is chiral if it has no plane of symmetry (c) A molecule containing chiral centres must be chiral (d) Prefix D- refers to dextrorotatory nature

Solution. Answer: (a), (b). Corrected: the book's key prints (a), (b), (c). Statement (c) is false because a meso compound contains chiral centres but is achiral (internal plane of symmetry). The prefix D- refers to the configuration of the compound (not the sign of rotation), so (d) is also false.

Teacher's Note: Meso compounds have stereocentres yet are achiral; D/L denote configuration, d/l or +/− denote rotation.

Exam Note: Cite meso compound to reject (c).

Question M3. In sp-hybridization of carbon, if 2s and 2pz undergo hybridization, then the two sp-orbitals: (a) are perpendicular to py (b) are perpendicular to px (c) are perpendicular to pz (d) are 120° to py and px

Solution. Answer: (a), (b). px, py and pz are at 90° to each other and the two sp-orbitals are linear (180°) along the z-axis, hence perpendicular to the unused px and py orbitals.

Teacher's Note: The two sp lobes lie along the axis of the p orbital that hybridised, at 90° to the unhybridised ones.

Exam Note: sp: linear, along z, perpendicular to px, py.

Question M4. Select the electrophiles: (a) :NF3 (b) PCl3 (c) CCl4 (d) :CCl2

Solution. Answer: (a), (b), (c), (d) (as printed in the book's key; reason given: due to the negative (−I) effect of the halogen atoms the central atom is electron-deficient and can accept electrons).

Teacher's Note: Halogen atoms withdraw electrons from the central atom, making it electrophilic; dichlorocarbene has an empty p orbital.

Exam Note: Key as printed; dichlorocarbene is the clear electrophile.

Question M5. Which of the following has non-zero dipole moment? (a) 1,4-HS−C6H4−SH (b) 1,4-NC−C6H4−CN (c) 1,4-HO−C6H4−OH (d) 1,4-H3CO−C6H4−COCH3 (as drawn in the book)

Solution. Answer: (a), (c), (d). In (a), (c) and (d) the bond dipoles do not cancel (the S−H, O−H and OCH3/COCH3 groups are not symmetrical along the ring axis), so the structure has non-zero dipole moment; in (b) the two CN dipoles are equal and opposite, giving zero.

Teacher's Note: Symmetric para disubstitution with identical linear groups cancels dipoles; bent groups or unlike groups do not.

Exam Note: Check symmetry and group geometry.

Question M6. Which of the following represents the correct order? (a) Stability: CH3+ > CH3−CH2+ < CH3−CH+−CH3 < (CH3)3C+ (b) Stability (free radicals): CH3• < CH3CH2• < (CH3)2CH• < (CH3)3C• (c) Hyperconjugation: CH3− < CH3CH2− < (CH3)2CH− < (CH3)3C− (d) Basic nature: CH3− > NH2− > OH− > F−

Solution. Answer: (b), (c), (d). Corrected: the book's key prints (a), (b), (c). Statement (a) is false, because CH3+ is the least stable carbocation (it cannot be more stable than CH3CH2+); the stability order is CH3+ < CH3CH2+ < (CH3)2CH+ < (CH3)3C+. Statement (d) is true: basic nature decreases as electronegativity of the atom bearing the lone pair increases along the period, CH3− > NH2− > OH− > F− (the book's note reads the series in the opposite direction).

Teacher's Note: More alkyl groups mean more hyperconjugation and stability; more electronegative atom holds its lone pair tighter, so weaker base.

Exam Note: Correct (a): methyl cation is least stable.

Question M7. Which of the following represents the correct order? (a) +I effect: CH3− < CH3CH2− < (CH3)2CH− < (CH3)3C− (b) −I effect: NO2 > SO3H > F > NH2 (c) Stability: allyl carbocation > vinyl carbocation (d) Stability: HC≡C− < CH3−C≡C− < CH2=CH− < CH3−CH2−

Solution. Answer: (a), (b), (c). The more the s-character on the carbon adjacent to the carbanion centre, the more is the stability: HC≡C− > CH3−C≡C− > CH2=CH− > CH3CH2−, so the order printed in (d) is reversed and false.

Teacher's Note: Carbanion stability rises with s character: sp > sp2 > sp3; methyl on the anion destabilises it.

Exam Note: sp carbanion is the most stable.

Question M8. Which are not the correct orders for C−Cl bond length in: I. CH3−CH2−Cl II. CH2=CH−Cl III. C6H5−Cl? (a) I > III > II (b) I > II > III (c) III > I > II (d) III > II > I

Solution. Answer: (a), (c), (d). CH3CH2Cl: no resonance; CH2=CHCl: 2 resonating structures; C6H5Cl: 4 resonating structures. Bond length of the functional group ∝ 1/(number of resonating structures), so the correct order is I > II > III, i.e. (b) is correct and the others are not.

Teacher's Note: More resonance gives more double-bond character in C−Cl, hence shorter bond.

Exam Note: Bond length falls as resonance structures increase.

Question M9. Which of the following are correctly shown for conjugated compounds? (a) Stability of conjugated compounds ∝ No. of resonating structures (b) Bond energy of conjugated compounds ∝ No. of resonating structures (c) Bond length of a functional group ∝ 1/Bond strength (d) Reactivity of a functional group due to breaking of bond ∝ 1/No. of resonating structures

Solution. Answer: (a), (b), (c), (d). These are facts.

Teacher's Note: More resonance structures mean more delocalisation: stable, stronger bonds, less reactive.

Exam Note: Delocalisation lowers reactivity.

Question M10. Which of the following are correct for N-compounds? (a) Basic nature ∝ stability of cation (b) Stability of cation ∝ degree of solvation (c) Basic nature ∝ degree of solvation (d) Basic nature ∝ 1/electronegativity of N

Solution. Answer: (a), (b), (c), (d). These are facts (same reasoning as above).

Teacher's Note: A base is stronger when its conjugate acid (cation) is more stabilised by solvation and by less electronegative nitrogen.

Exam Note: Conjugate-acid stability decides basicity.

Question M11. Select the correct statements: (a) Carbocations are electrophiles (b) Carbocation is diamagnetic in nature (c) Triphenyl methyl carbocation is propeller in shape (d) Carbocation are trigonal planar

Solution. Answer: (a), (b), (c), (d). These are facts: carbocations are electron-deficient (electrophilic), all electrons are paired (diamagnetic), the carbon is sp2 trigonal planar, and in Ph3C+ the three rings are twisted like a propeller.

Teacher's Note: sp2 carbon with empty p orbital: planar, electron-poor, no unpaired electrons.

Exam Note: Carbocation: sp2, planar, diamagnetic.

Question M12. Which hybridizations are present in pyrrole? (a) sp (b) sp2 (c) sp3 (d) sp3d

Solution. Answer: (b). Corrected: the book's key prints (b), (c) (stating that N is sp3). In pyrrole all four carbons and the nitrogen are sp2 hybridised (the N lone pair is in the p orbital and is part of the aromatic sextet); there is no sp or sp3 or sp3d atom.

Teacher's Note: Planar aromatic ring: nitrogen lone pair occupies a p orbital, so N is sp2.

Exam Note: Aromatic five-membered ring: all atoms sp2.

Question M13. Which of the following will not show SN1 reactions? (a) CH3−CO−CH2−Cl (b) C6H5CH2Cl (c) p-CH3O−C6H4−CH2Cl (d) H−CO−CH2−Cl

Solution. Answer: (a), (d). SN1 reactions are favoured if unsaturation is at the β-carbon; SN2 reactions are favoured if unsaturation is at the α-carbon, and a substrate containing a carbonyl group at the β-carbon... (here the C=O adjacent to CH2Cl) does not give SN1 reaction, as the carbocation next to C=O is destabilised.

Teacher's Note: A carbocation next to an electron-withdrawing carbonyl is very unstable, so α-halo carbonyls avoid SN1.

Exam Note: α-Halo ketone/aldehyde favours SN2 only.

Question M14. Which of the following will give SN reactions? (a) R−NH2 (b) R−OH (c) R−N3 (d) R−Br

Solution. Answer: (b), (c), (d). R−NH2 does not give SN reactions as −NH2 is a poor leaving group.

Teacher's Note: Leaving ability of the group decides: NH2− is far too strong a base to leave.

Exam Note: Good leaving group is a weak base.

Question M15. Which of the following on subjecting for SN2 reaction will show Walden inversion? (a) CH3CHDBr (b) CH3CH2Br (c) C6H5CH2Br (d) C2H5CHDBr

Solution. Answer: (a), (d). Only optically active compounds show Walden inversion: CH3CHDBr and C2H5CHDBr have a chiral carbon (H, D, Br and alkyl group).

Teacher's Note: Inversion of configuration is observable only at a stereocentre; D-labelled carbons are chiral.

Exam Note: Need a chiral carbon to see Walden inversion.

Question M16. Which of the following reactions do not represent trans-esterification? (a) C6H5COOC2H5 + NaOH → C6H5COONa + C2H5OH (b) C6H5COOC2H5 + H2O → C6H5COOH + C2H5OH (c) C6H5COOC2H5 + CH3OH → C6H5COOCH3 + C2H5OH (d) C6H5COCl + CH3OH → C6H5COOCH3 + HCl

Solution. Answer: (a), (b), (d). Trans-esterification is the reaction of an ester with an alcohol to give a different ester, which is shown only by (c).

Teacher's Note: Trans-esterification needs ester plus alcohol giving another ester; (a),(b) are hydrolysis, (d) acylation.

Exam Note: Ester + alcohol gives new ester.

Question M17. Which statements are correct for the given reaction, if it takes place? R−CO−L + Nu− → R−CO−Nu + L− (a) Basic nature of Nu− should be greater than L− (b) Basic nature of L− should be greater than Nu− (c) Acyl carbon is nucleophile (d) Acyl carbon is electrophile

Solution. Answer: (a), (d). If L− is the better leaving group, a nucleophile (i.e. of less basic nature than... with greater basicity than L−) then only the reaction is possible; the acyl carbon is the electrophilic centre.

Teacher's Note: Nucleophilic acyl substitution goes toward the weaker base; the carbonyl carbon is the electrophile.

Exam Note: Reaction proceeds from stronger base to weaker base.

Question M18. Which of the following will not give reaction according to benzyne mechanism on treating with KNH2/NH3? (a) chlorobenzene (b) and (d) chlorobenzenes in which both positions ortho to Cl carry CH3 groups (as drawn in the book) (c) a chlorotoluene with one ortho CH3

Solution. Answer: (b), (d). Aryl halides having no H-atom at ortho position do not show benzyne mechanism.

Teacher's Note: Benzyne forms by loss of H and X from adjacent carbons; blocked ortho positions prevent it.

Exam Note: Need an ortho hydrogen for elimination.

Question M19. The correct orders of reactivity are represented in: (a) Halobenzenes SNAr reactions: C6H5F > C6H5Cl = C6H5Br > C6H5I (b) Activating nature of groups in benzene: −NH2 > −OH > −CH3 > −Cl (c) Reactivity following SN2: R−I > R−Br > R−Cl > R−F (d) Reactivity following SN1: RI > RBr > RCl > RF

Solution. Answer: (a), (b), (c), (d). All the facts are based on electronic displacement and mechanism.

Teacher's Note: Aryl SNAr: rate-limiting attack favours F; SN1/SN2: leaving-group ability I > Br > Cl > F.

Exam Note: Know leaving-group order and activating-group order.

Question M20. Which of the following will give alkene? (a) CH3−CHBr−CHBr−CH3 →(NaI/acetone) (b) CH3−CHBr−CHBr−CH3 →(Zn/CH3COOH) (c) CH3−CHBr−CH2−CH3 →(NaI/acetone) (d) CH3CHBr−CH2CH3 →(KOH alc.)

Solution. Answer: (a), (b), (d). Vicinal dibromides are debrominated to alkenes by NaI/acetone (E2 mechanism, giving RCH=CHR + I2 + 2NaBr) and by Zn/CH3COOH (Zn behaves as a nucleophile, giving RCH=CHR + ZnBr2); RCHBr−CH2−CH3 with alcoholic KOH gives RCH=CH−CH3 + HBr. Mono-bromide with NaI only exchanges halogen (c).

Teacher's Note: Vicinal dihalides lose both halogens to give alkenes; a single halide with NaI just swaps halogen.

Exam Note: Vic-dibromide + NaI or Zn gives alkene.

Question M21. Select the correct statements: (a) According to Markownikoff's rule - "Richer becomes richer". (b) Markownikoff's rule can be used for addition of unsymmetrical alkenes. (c) Markownikoff's rule can be used if substituents present on doubly bonded carbons have +I groups. (d) Addition of HCl on C6H5−CH=C(CH3)2 follows Markownikoff's rule.

Solution. Answer: (a), (b), (c). For C6H5CH=C(CH3)2 + H+Cl−, H+ adds to the CH carbon to give the more stable tertiary carbocation C6H5CH2−C+(CH3)2 and Cl− then gives the major product C6H5CH2−CCl(CH3)2; the alternative benzylic-type cation (less stable here per the book) gives the minor product C6H5CHCl−CH(CH3)2. The book's key excludes (d).

Teacher's Note: Markovnikov: hydrogen goes to the carbon with more hydrogens; applies to unsymmetrical alkenes with +I substituents.

Exam Note: Statement (d) is excluded in the printed key.

Question M22. Select the correct reactions: (a) CH2=CH−N+(CH3)3 + HBr → BrCH2CH2N+(CH3)3 (b) CH2=CH−N(CH3)2 + HBr → CH3−CHBr−N(CH3)2 (c) CH2=CH−CF3 + HBr → BrCH2−CH2−CF3 (d) CH3−CH=CH2 + HCl (peroxide) → CH3−CHCl−CH3

Solution. Answer: (a), (c). Anti-Markownikoff addition is observed when one doubly bonded carbon is attached with a powerful electron-withdrawing group (N+(CH3)3, CF3). Kharash effect is not observed in HCl, so (d) is Markovnikov product without peroxide effect (given product as drawn is not the peroxide-effect product).

Teacher's Note: Strong −I groups reverse the polarity of the double bond, giving anti-Markovnikov products without peroxides.

Exam Note: Peroxide effect works only with HBr.

Question M23. Select the correct statements about CH3−CH=CH2 →(Br2/NaCl): (a) CH3−CHCl−CH2Br is major product and CH3CHBr−CH2Br is minor product (b) CH3−CHCl−CH2Br is minor product and CH3CHBr−CH2Br is major product (c) Formation of cyclobromonium cation takes place as an intermediate (d) Formation of cyclochloronium cation takes place as an intermediate

Solution. Answer: (a), (c). CH3−CH=CH2 + Br2 → cyclic bromonium ion; Cl− (present in large amount, and more reactive nucleophile than Br−) opens it to give the major product CH3−CHCl−CH2Br plus the minor product CH3−CHBr−CH2Br.

Teacher's Note: Excess Cl− traps the bromonium ion at the more substituted carbon.

Exam Note: Name the bromonium ion intermediate.

Question M24. Which statements are correct for the following reaction? CH3−CH=CH2 + HBr →(dibenzoyl peroxide) CH3CH2CH2Br (a) Initiation step involves formation of C6H5C(=O)O•, H• and Br• radicals (b) In propagation step Br• attacks first to react with π system of alkene (c) In propagation step H• attacks first to react with π system of alkene (d) Initiation step starts with formation of C6H5C(=O)O•

Solution. Answer: (b), (d). The mechanism is: (C6H5COO)2 → 2C6H5C(=O)O• (initiation); C6H5C(=O)O• + HBr → C6H5COOH + Br• (initiation); CH3−CH=CH2 + Br• → CH3−C•H−CH2Br (propagation); CH3−C•H−CH2Br + HBr → CH3CH2CH2Br + Br• (propagation).

Teacher's Note: Peroxide gives benzoyloxy radical, which makes Br• from HBr; Br• adds first to the alkene.

Exam Note: Br radical adds first; anti-Markovnikov product.

Question M25. About a reaction producing more than one product, through common intermediate, the: (a) product formed most rapidly is called kinetic product (b) product formed most stable is called thermodynamic product (c) process giving kinetic product in excess is called kinetically controlled process (d) process giving thermodynamic product in excess is called thermodynamically controlled process

Solution. Answer: (a), (b), (c), (d). Example: CH2=CH−CH=CH2 + HBr at 80°C gives CH3CHBr−CH=CH2 (80%) + CH3CH=CHCH2Br (20%); at 45°C the 1,4-product is 85% and the 1,2-product 15% in the thermodynamically controlled process (as printed). The intermediate carbocations are CH3−C+H−CH=CH2 (more stable) and CH3−CH=CH−C+H2 (less stable). The product formed by the more stable carbocation is always kinetically controlled and by the less stable one thermodynamically controlled.

Teacher's Note: Low temperature favours the fastest-formed (kinetic) product; high temperature lets the most stable product accumulate.

Exam Note: Kinetic = fastest formed; thermodynamic = most stable.

Question M26. Which of the following are nucleophilic additions? (a) CH≡CH + HCN → (b) CH≡CH + HCl → (c) CH≡CH + ROH →(KOH) (d) CH≡CH + :CH2 →

Solution. Answer: (a), (c). CH≡CH + CN− → CN−CH=CH− →(H+) CH2=CH−CN. CH3OH + KOH → CH3OK + H2O; CH3OK ⇌ CH3O− + K+; CH≡CH + CH3O− → CH2=CH−OCH3 (after H+).

Teacher's Note: Alkynes add anionic nucleophiles (CN−, RO−) in base; HCl is electrophilic addition, carbene is electrophilic.

Exam Note: Nucleophilic addition on alkyne needs strong nucleophile and base.

Question M27. Hexa-1,3,5-triene on reaction with 1 equivalent of HBr gives: (a) CH3−CHBr−CH=CH−CH=CH2 (b) CH3−CH=CH−CHBr−CH=CH2 (c) CH3−CH=CH−CH=CH−CH2Br (d) CH2=CH−CH=CH−CH2−CH2Br-type isomer as printed in the book

Solution. Answer: (a), (b), (c), (d). H+ adds to the terminal carbon giving the delocalised carbocation CH3−C+H−CH=CH−CH=CH2 ↔ CH3−CH=CH−C+H−CH=CH2 ↔ CH3−CH=CH−CH=CH−C+H2; bromide can attack at each positive site (1,2-, 1,4- and 1,6-addition), so all of the products are possible.

Teacher's Note: The cation is delocalised over three carbons, so bromide can add at C-2, C-4 or C-6.

Exam Note: Longer conjugation gives 1,2-, 1,4- and 1,6-adducts.

Question M28. Select the correct statements about addition of Br2 on cis-but-2-ene: (a) It is stereospecific reaction (b) Stereochemistry of product depends upon stereochemistry of substrate (c) Br2 always shows antiaddition (d) Cis-2-butene with Br2 gives enantiomers of 2,3-dibromobutane

Solution. Answer: (a), (b), (c), (d). cis-2-Butene + Br2 → symmetrical bromonium ion → anti attack by Br− gives the pair of enantiomers (racemic) (2R,3R)- and (2S,3S)-2,3-dibromobutane.

Teacher's Note: Bromonium ion forces anti attack; cis alkene gives racemic pair, trans gives meso.

Exam Note: Stereospecific anti addition.

Question M29. Which of the following will produce geometrical isomers on treating with NH2OH? (a) CH3COCH3 (b) HCHO (c) CH3COCH2CH3 (d) CH3CHO

Solution. Answer: (c), (d). Unsymmetrical carbonyl compounds form syn and anti oximes: C=O + H2NOH → C=NOH (syn and anti oximes).

Teacher's Note: Oxime C=N−OH shows geometrical isomerism only if the two groups on carbon differ.

Exam Note: Acetaldehyde and butanone give syn/anti oximes.

Question M30. Select correct reactivity orders for nucleophilic addition of carbonyl compounds: (a) cyclopropanone > cyclobutanone > cyclopentanone > cyclohexanone (b) FCH2−CHO > CH3CHO > C6H5CHO > CH3COCH3 (c) ClCH2CHO > HCHO > CH3COCH3 > (the least reactive ketone listed in the book) (d) C2H5COC2H5 > C2H5−CO−CH(CH3)−C2H5 > C2H5−C(CH3)2−CO−C(CH3)2−C2H5

Solution. Answer: (a), (b), (c), (d). Follow the mechanism of C=O → C+−O−. Notice that the more the positive charge on the C+ centre (and the less the steric crowding), the more is its reactivity.

Teacher's Note: Electron-withdrawing groups and less crowding raise carbonyl electrophilicity.

Exam Note: Compare charge on carbonyl carbon and steric hindrance.

Question M31. Select the correct statements about reactions of carbonyl compounds with alcohols: (a) These reactions are addition reactions and reversible in nature (b) Aldehydes form hemi-acetal and acetal in acid medium (c) Ketone forms hemi-ketal and ketal in basic medium (d) Hemi-acetal and hemi-ketal are formed when pH > 7 whereas acetal and ketals when pH < 7

Solution. Answer: (a), (d). Hemi-acetal and hemi-ketals are given in basic medium, whereas acetal and ketal in acid medium.

Teacher's Note: Base gives only the hemi-acetal; full acetal/ketal formation needs acid catalyst.

Exam Note: Acetal needs acid; hemiacetal forms in base.

Question M32. Which of the following gives iodoform test with NaOI? (a) cyclopropyl methyl ketone (b) C6H5CHOHCH3 (c) CH2BrCOCH3 (d) H2C(COCH3)2

Solution. Answer: (a), (b), (c) (as printed in the book's key). Each has CH3−C(=O)− or CH3−CH(OH)− unit. In (d) halogen attacks on H of CH2 as it has reactive methylene H-atoms.

Teacher's Note: Look for CH3CO− or CH3CH(OH)− group.

Exam Note: Iodoform needs methyl ketone or CH3CH(OH) unit.

Question M33. Which of the following will decarboxylate on heating? (a) CH3COCH2COOH (b) HOOC−CH2CH2−COOH (c) CH3CO−CH2−COCH3 (d) CH3−CH2−CO−CH2−COOH

Solution. Answer: (a), (b), (d). Dicarboxylic acids show decarboxylation on heating. Also, β-oxocarboxylic acids also undergo decarboxylation.

Teacher's Note: β-Keto acids lose CO2 easily; (c) has no COOH to lose.

Exam Note: Need a COOH group, preferably β-keto.

Question M34. Which are correct about the reaction CH3CHO + CH3CH2CHO →(OH−, 10°C): (a) The reaction is crossed aldol addition (b) The reaction is mixed aldol addition (c) The reaction gives four aldols (d) The products formed can be separated easily

Solution. Answer: (a), (b), (c). If both the carbonyl compounds have α-H atoms, four products are formed. If one of the carbonyl compounds has an α-H atom, two products are formed. The products formed have similar physical and chemical properties and thus their separation is difficult.

Teacher's Note: Both aldehydes can act as enolate and as electrophile, giving four cross and self aldols.

Exam Note: Two enolisable partners give four products.

Question M35. Which of the following compounds will give positive Tollens' reagent test? (a) CH3CH2CH2CH(OH)OCH3 (b) CH3CH2CH(OCH3)2 (c) 2-hydroxytetrahydropyran (cyclic hemiacetal) (d) CH3CHO

Solution. Answer: (a), (c), (d). Tollens' reagent is a mild oxidant. It converts CHOH to CHO and then COOH as well as hemi-acetals are also converted to aldehyde and then −COOH.

Teacher's Note: Hemiacetals are in equilibrium with the free aldehyde, so they give a silver mirror; acetals do not.

Exam Note: Hemiacetal gives test; acetal does not.

Question M36. Which of the following are tautomers? (a) cyclohexa-2,5-dienone and phenol (b) the phenoxide ion and the keto-carbanion (resonance forms drawn) (c) CH2=N+(O−)O− drawn two ways (d) CH3−N(=O)=O (nitromethane) and its aci-form CH2=N(O−)OH

Solution. Answer: (a), (d). Follow tautomerism: tautomers are structural isomers that differ in the position of an H atom (and double bond); (b) and (c) are resonance structures, not tautomers.

Teacher's Note: Tautomers differ in position of atoms (H), resonance structures differ only in electron placement.

Exam Note: Resonance forms do not differ in atom positions.

Question M37. Which of the following form stable hemi-ketal? (a) C6H5−CO−C6H5 (b) HO(CH2)3−CO−CH3 (c) CH2OH−CO−(CHOH)3−CH2OH (d) HO−CH2−(CH2)3−CO−CH3

Solution. Answer: (b), (c), (d). Simple ketals are less stable; intramolecular hemi-ketals (five- or six-membered rings) are stable.

Teacher's Note: Hydroxy ketones can cyclise to five- or six-membered hemiketals, which are stable.

Exam Note: Ring size five or six gives stable hemiketal.

Question M38. Which of the following will show Dieckmann condensation reactions? (a) C2H5OOC−(CH2)4−COOC2H5 (b) C2H5OOC−(CH2)5−COOC2H5 (c) C2H5OOC−(CH2)6−COOC2H5 (d) C2H5OOC−(CH2)3−COOC2H5

Solution. Answer: (a), (b), (c). Dieckmann condensation is an intramolecular condensation shown by diesters: C2H5OOC−(CH2)4−COOC2H5 →((i) C2H5ONa/C2H5OH; (ii) H2O/HCl) 2-ethoxycarbonylcyclopentanone. The reaction is given by 1,6; 1,7 and 1,8 dibasic esters.

Teacher's Note: Intramolecular Claisen closes five-, six- or seven-membered rings; glutarate would form a strained four-membered ring.

Exam Note: 1,6-diester gives cyclopentanone ester.

Question M39. When an aldehyde is treated with formaldehyde in presence of an aqueous base, the formaldehyde is always oxidised and the other aldehyde is reduced. The reasons for this are: (a) Formaldehyde is a better reductant than the other aldehyde (b) In an aqueous basic solution it exists as a conjugate base of its hydrate which is one of the intermediates of the reaction HCHO + HOH → H−CH(OH)2 →(OH−) H−CH(OH)−O− (c) It has two α-H-atoms on carbonyl group whereas other aldehydes have only one α-H-atom (d) The reaction is called crossed Cannizzaro reaction

Solution. Answer: (a), (b), (c), (d). All are facts.

Teacher's Note: Formaldehyde hydrates most readily, so its hydrate anion transfers hydride (best reductant) in crossed Cannizzaro.

Exam Note: HCHO is oxidised; partner aldehyde is reduced.

Question M40. Which of the following will show intramolecular Cannizzaro reaction? (a) o-C6H4(CHO)2 (b) C2H5−CO−CHO (c) C6H5−CO−CHO (d) CH3−CO−CHO

Solution. Answer: (a), (c), (d). α-Keto aldehydes lacking α-H atom also show Cannizzaro reaction. Keto group is reduced and aldehyde is oxidised. (In (b) the ethyl group has α-hydrogens, so aldol-type reaction competes and it does not give it.)

Teacher's Note: Intramolecular Cannizzaro needs two carbonyls without α-hydrogen, as in phthalaldehyde and aryl glyoxals.

Exam Note: No α-H, two carbonyls: intramolecular Cannizzaro.

Question M41. Which of the following alcohols are not oxidised by MnO2? (a) C6H5CH2OH (b) CH3−CH=CH−CH(OH)−CH3 (c) C6H5CH2CH2OH (d) CH3CH=CHOH

Solution. Answer: (c), (d). Corrected: the book's key prints (a), (b), (c), but its own note says "MnO2 oxidises only alcohols with allyl group and benzyl alcohol". So (a) benzyl alcohol and (b) the allylic alcohol are oxidised; (c) 2-phenylethanol is not oxidised, and (d) is an enol (vinyl alcohol) that exists as propanal, not an alcohol that MnO2 oxidises.

Teacher's Note: MnO2 is selective for allylic and benzylic alcohols only.

Exam Note: Selective oxidant: allylic/benzylic OH only.

Question M42. The reductants used for the conversion p-HO−C6H4−CHO → p-HO−C6H4−CH3 are: (a) Zn-Hg/conc. HCl (b) NH2NH2/alc. KOH (c) HS−(CH2)3−SH/H+, Ni/H2 (d) red P + HI

Solution. Answer: (b), (c). In the others (acidic reducing conditions, Zn-Hg/HCl and red P/HI) the −OH group will also be reduced.

Teacher's Note: Wolff-Kishner and thioacetal/Raney Ni leave the phenolic OH intact; HI and Clemmensen conditions attack it.

Exam Note: Choose conditions that preserve phenolic OH.

Question M43. Which of the following will yield a hydrocarbon when treated with CH3MgBr? (a) C6H5−CO−CH2−CO−C6H5 (b) CH≡CH (c) R−OH (d) H2SO4

Solution. Answer: (a), (b), (c), (d). Compounds having an acidic or active H-atom give alkane (methane) with Grignard reagent.

Teacher's Note: Grignard acts as base on any acidic H (active methylene, alkyne, OH, H2SO4), releasing CH4.

Exam Note: Acidic H gives hydrocarbon with RMgX.

Question M44. The reaction phenol →(?) salicylaldehyde can be made by: (a) CHCl3/alc. KOH followed by hydrolysis (b) HCN/HCl, anhydrous AlCl3 (c) (CH2)6N4/OH− followed by hydrolysis (d) CrO3

Solution. Answer: (a), (b), (c). The reaction made by hexamethylene tetraamine followed by hydrolysis is called Duff reaction; (a) is Reimer-Tiemann and (b) is Gattermann formylation.

Teacher's Note: Reimer-Tiemann, Gattermann and Duff reactions all formylate phenol ortho.

Exam Note: Name: Reimer-Tiemann, Gattermann, Duff.

Question M45. Which of the following gives carbylamine test? (a) aniline (b) 2,6-dimethylaniline (c) CH2=CH−CH2NH2 (d) cyclohexylamine

Solution. Answer: (a), (c), (d). Steric hindrance in (b) does not allow the test.

Teacher's Note: Primary amines give carbylamine test; the two ortho methyl groups block reaction in (b).

Exam Note: Primary amine plus CHCl3/KOH gives isocyanide.

Question M46. Which of the following will give Ullmann reaction? (a) iodobenzene (b) 2-nitrochlorobenzene (c) fluorobenzene (d) alkyl 2-chlorobenzoate

Solution. Answer: (a), (b), (d). Aryl fluoride does not give Ullmann's reaction.

Teacher's Note: Ullmann coupling with copper needs aryl I, Br, or activated Cl; C−F is too strong.

Exam Note: Aryl fluoride is unreactive.

Question M47. Nitration of salicylic acid gives: (a) 3-nitrophenol (b) Picric acid (c) 2,4,6-trinitrophenol (d) 2,4,6-trinitrobenzoic acid

Solution. Answer: (b), (c). Salicylic acid →(nitration) 2,4,6-trinitrophenol (picric acid), the COOH group being lost as CO2.

Teacher's Note: Ring activated by OH is nitrated at o and p; COOH is displaced (ipso), giving picric acid.

Exam Note: Picric acid is 2,4,6-trinitrophenol.

Question M48. Which of the following will give white precipitate with AgNO3 in presence of HNO3? (a) C6H5NH3+Cl− (b) C6H5Cl (c) 2,4,6-trinitrochlorobenzene (d) CH3SH

Solution. Answer: (a), (c). In (c) presence of three −NO2 groups increases reactivity of Cl (it is easily replaced); (a) gives free Cl− ions.

Teacher's Note: AgCl forms only if chloride is ionic or very labile; chlorobenzene is inert.

Exam Note: Aryl Cl inert unless strongly activated.

Question M49. Which have asymmetric carbon atoms? (a) CH2Cl−CH2Br (b) CH3−CH2Cl (c) CH3−CHCl−D (d) CH3−CH(OH)−CH2Br (structures drawn in the book as Newman-type line formulae)

Solution. Answer: (c), (d). (C* are asymmetric carbon atoms): CH3−C*HCl−D (H, D, Cl, CH3 all different) and the bromo-alcohol with a carbon bonded to H, OH, CH3 and CH2Br.

Teacher's Note: Asymmetric carbon: four different groups; D differs from H.

Exam Note: Isotopes (D vs H) can create a chiral centre.

Question M50. Which of the following have asymmetric carbon atoms? (a) CH3CH2CH2Br (b) CH3−CH(CH3)... as drawn: CH3−C*H(Br)−CH(CH3)− (2-bromo-3-methylbutane type) (c) CH3−CH2−CHBr−CH3 (d) CH3−C(Br)(CH3)−CH2−CH3

Solution. Answer: (b), (c). (C* are asymmetric carbon atoms): CH3−C*H(Br)−CH(CH3)2-type and CH3−CH2−C*HBr−CH3. In (a) and (d) no carbon has four different groups (d has two CH3 on the carbon bearing Br).

Teacher's Note: Check each sp3 carbon for four different substituents.

Exam Note: Two identical groups mean not chiral.

Question M51. Tautomerism is exhibited by: (a) C6H5−CH=CH−OH (b) p-benzoquinone (c) cyclohex-2-ene-1,4-dione-type enedione as drawn (d) cyclohexane-1,3-dione

Solution. Answer: (a), (c), (d). C6H5−CH=CH−OH ⇌ C6H5−CH2−CHO (enol-keto); the diketones (c) and (d) also exist in keto and enol forms (e.g. cyclohexane-1,2/1,3-dione ⇌ hydroxy-enone). p-Benzoquinone has no α-hydrogen, so no tautomerism.

Teacher's Note: Keto-enol tautomerism needs an α-hydrogen next to C=O.

Exam Note: Needs α-H.

Question M52. Which of the following compounds will show geometrical isomerism? (a) 2-butene (b) Propene (c) 1-phenyl propene (d) 2-methyl-2-butene

Solution. Answer: (a), (c). CH3−CH=CH−CH3 shows cis and trans forms; C6H5−CH=CH−CH3 shows cis and trans forms. Propene and 2-methyl-2-butene have two identical groups on one alkene carbon.

Teacher's Note: Each alkene carbon must carry two different groups.

Exam Note: Check both double-bond carbons.

Question M53. Which of the following will give yellow precipitate with I2/NaOH? (a) CH3COCH2CH3 (b) CH3COOCOCH3 (c) CH3CONH2 (d) CH3CH(OH)CH2CH3

Solution. Answer: (a), (d). Both have CH3−C(=O)− and CH3−CH(OH)− groups. The yellow precipitate is iodoform.

Teacher's Note: Iodoform test: CH3CO− ketones or CH3CH(OH)− alcohols; acid derivatives hydrolyse instead.

Exam Note: Methyl ketone or secondary methyl carbinol.

Question M54. Reaction of R−CO−NH2 with a mixture of Br2 and KOH gives R−NH2 as the main product. The intermediate involved in this reaction are: (a) R−CO−NHBr (b) R−NHBr (c) R−N=C=O (d) R−CO−NBr2

Solution. Answer: (a), (c). This is Hoffmann bromamide reaction: RCONH2 + Br2 + 4KOH(aq) → RNH2 + 2KBr + 2H2O + K2CO3. Mechanism: RCONH2 + Br2 → R−CO−NHBr (N-bromoamide); with KOH it loses HBr to give the nitrene R−CO−N: which rearranges (R migrates) to the isocyanate R−N=C=O; R−N=C=O + 2KOH → RNH2 + K2CO3.

Teacher's Note: N-bromoamide then isocyanate are the isolable-type intermediates; R migrates from C to N.

Exam Note: Name intermediates: N-bromoamide, nitrene, isocyanate.

Question M55. The ether C6H5−O−CH2−C6H5 when treated with HI produces: (a) C6H5CH2I (b) C6H5CH2OH (c) C6H5I (d) C6H5OH

Solution. Answer: (a), (d). C6H5−O−CH2−C6H5 →(HI) C6H5OH + C6H5CH2I.

Teacher's Note: Cleavage occurs at the alkyl (benzyl) C−O bond; aryl C−O bond is too strong.

Exam Note: Aryl alkyl ether gives phenol + alkyl iodide.

Question M56. Which of the following will undergo aldol condensation? (a) Acetaldehyde (b) Propionaldehyde (c) Benzaldehyde (d) Trideuteroacetaldehyde

Solution. Answer: (a), (b), (d). Benzaldehyde does not have α-H atom.

Teacher's Note: Aldol needs α-hydrogens (or α-deuteriums that can still be removed).

Exam Note: No α-H, no aldol.

Question M57. Which will react with acetone to give a product containing >C=N− linkage? (a) C6H5NH2 (b) (CH3)3N (c) C6H5NHC6H5 (d) C6H5NHNH2

Solution. Answer: (a), (d). (CH3)2C=O + H2N−C6H5 → (CH3)2C=N−C6H5 (anil); with C6H5NHNH2 → (CH3)2C=N−NHC6H5 (phenylhydrazone).

Teacher's Note: Only primary amine derivatives (NH2−) condense to C=N; tertiary and secondary amines cannot.

Exam Note: Needs a primary NH2 group.

Question M58. When phenol is reacted with CHCl3 and NaOH followed by acidification, salicylaldehyde is obtained. Which of the following species are involved in the above mentioned reaction as intermediates? (a) 6-(dichloromethyl)cyclohexa-2,4-dienone (keto form with H and CHCl2 at the ortho carbon) (b) o-hydroxybenzal chloride-type phenol with CHCl2 at the ortho position (c) keto form carrying CHCl(OH) (d) the phenoxide form with CHCl2

Solution. Answer: (a), (b). Follow the mechanism of the Reimer-Tiemann reaction: C6H5OH + CHCl3 + KOH → o-HO−C6H4−CHO. (Intermediate: dichlorocarbene :CCl2 attacks the phenoxide ortho position, giving the dichloromethyl keto form which tautomerises to the dichloromethylphenol and then hydrolyses.)

Teacher's Note: Dichlorocarbene adds ortho to phenoxide; the dichloromethyl intermediate hydrolyses to CHO.

Exam Note: Carbene mechanism: CCl2 then hydrolysis.

Question M59. A new carbon-carbon bond formation is possible in: (a) Cannizzaro reaction (b) Friedel-Crafts alkylation (c) Clemmensen reduction (d) Reimer-Tiemann reaction

Solution. Answer: (b), (d). C6H6 + CH3Cl →(AlCl3) C6H5CH3 (Friedel-Crafts reaction); C6H5OH + CHCl3 + KOH → o-HOC6H4CHO (Reimer-Tiemann reaction).

Teacher's Note: Ring-carbon to substituent-carbon bond is formed in alkylation and formylation; Cannizzaro/Clemmensen only transfer H.

Exam Note: Count new C−C bonds in the product.

Question M60. p-Chloroaniline and anilinium hydrochloride can be distinguished by: (a) Sandmeyer reaction (b) NaHCO3 (c) AgNO3 (d) Carbylamine test

Solution. Answer: (b), (c). C6H5NH3Cl gives effervescence with NaHCO3 and white ppt. with AgNO3.

Teacher's Note: Anilinium chloride is an acidic salt with ionic chloride; p-chloroaniline is a neutral base with covalent Cl.

Exam Note: Ionic Cl− and acidity are the clues.

Question M61. Toluene when treated with Br2/FeBr3, gives p-bromotoluene as the major product because the CH3 group: (a) is para directing (b) is meta directing (c) activates the ring by hyperconjugation (d) deactivates ring

Solution. Answer: (a), (c). These are facts: CH3 is o/p-directing and activates the ring by hyperconjugation (and +I effect); the para product dominates for steric reasons.

Teacher's Note: Hyperconjugation pushes electron density to the ortho and para positions; para is less hindered.

Exam Note: CH3: activating, o/p-directing.

Question M62. Resonance structure of a molecule should have: (a) identical arrangement of atoms (b) nearly the same energy content (c) the same number of paired electrons (d) identical bonding

Solution. Answer: (a), (b), (c). These are the facts: resonance structures differ only in electron arrangement, not atom positions, and must have similar energy and the same number of paired (unpaired) electrons. Bonding need not be identical.

Teacher's Note: Atoms stay fixed; only π electrons and lone pairs move; bonding patterns differ between structures.

Exam Note: Resonance forms differ in bonding, not atom position.

Question M63. Phenol is less acidic than: (a) acetic acid (b) p-methoxyphenol (c) p-nitrophenol (d) ethanol

Solution. Answer: (a), (c). Carboxylic acids are more acidic than phenol because the carboxylate anion is more resonance stabilised than the phenoxide ion (charge shared equally between two oxygens). The −NO2 group is electron withdrawing and increases the acidity of phenol.

Teacher's Note: Carboxylate delocalises charge on two O atoms; nitro stabilises phenoxide.

Exam Note: Acetic acid and p-nitrophenol both stronger than phenol.

Question M64. Dipole moment is shown by: (a) 1,4-dichlorobenzene (b) cis-1,2-dichloroethene (c) trans-1,2-dichloroethene (d) trans-1,2-dichloro-2-pentene (structure as drawn: ClCH2−CH=C(Cl)−C2H5 with Cl and H trans)

Solution. Answer: (b), (d). cis-1,2-Dichloroethene has the two C−Cl dipoles on the same side, so the dipoles add up; in the unsymmetrical chloro-pentene (d) the two different C−Cl bond dipoles do not cancel. Compounds (a) and (c) are symmetrical with cancelling dipoles (μ = 0).

Teacher's Note: Cancellation needs identical, opposite bond dipoles; cis or unsymmetrical arrangements leave a net dipole.

Exam Note: Symmetric trans and para forms give zero.

Question M65. Only two isomeric monochloro derivatives are possible for: (a) n-butane (b) 2,4-dimethylpentane (c) benzene (d) 2-methylpropane

Solution. Answer: (a), (d). n-Butane and 2-methylpropane have two isomeric monochloro derivatives: CH3CH2CH2CH2Cl (1-chlorobutane) and CH3CH2CHClCH3 (2-chlorobutane); (CH3)2CHCH2Cl (1-chloro-2-methylpropane) and (CH3)3CCl (2-chloro-2-methylpropane). Benzene gives only one; 2,4-dimethylpentane gives three.

Teacher's Note: Count sets of equivalent hydrogens: two sets give two monochloro isomers.

Exam Note: Number of monochloro isomers = number of H types.

Question M66. Which of the following have asymmetric carbon atom? (a) CH2Cl−CH2Br-type (no chiral carbon) (b) CH3CH2Cl (c) CH3−CHCl−CH2Cl (d) CH3−CH(OH)−CH2Br-type bromo alcohol (as drawn)

Solution. Answer: (c), (d). A chiral carbon atom or an asymmetric C-atom is that C-atom which contains four different groups at its four valencies: CH3−C*HCl−CH2Cl and the bromo-alcohol (C* are asymmetric carbons).

Teacher's Note: Look for a carbon carrying four different groups.

Exam Note: Four different groups define a stereocentre.

Question M67. The compound in which C uses its sp3-hybrid orbitals for bond formation is: (a) HCOOH (b) (H2N)2CO (c) (CH3)3COH (d) CH3OH

Solution. Answer: (c), (d). In saturated state, carbon forms four σ-bonds and has sp3-hybridisation (in HCOOH and urea the carbon is sp2).

Teacher's Note: Four single bonds mean sp3; a C=O carbon is sp2.

Exam Note: Count σ bonds and π bonds on carbon.

Question M68. Among the following compounds, which will react with acetone to give a product containing >C=N− bond? (a) C6H5NH2 (b) (CH3)3N (c) C6H5NHC6H5 (d) C6H5NHNH2

Solution. Answer: (a), (d). Aniline and phenyl hydrazine both undergo condensation reaction to form hydrazones: C6H5NH2 + O=C(CH3)2 → C6H5N=C(CH3)2 + H2O; C6H5NHNH2 + O=C(CH3)2 → C6H5NH−N=C(CH3)2 + H2O.

Teacher's Note: Condensation needs an NH2 group on the nitrogen nucleophile to lose water and form C=N.

Exam Note: Primary NH2 gives C=N.

Question M69. An aromatic molecule will: (a) have 4nπ electrons (b) have (4n + 2)π electrons (c) be planar (d) be cyclic

Solution. Answer: (b), (c), (d). An aromatic molecule may have: (i) (4n + 2)π electrons (Hückel rule), n = 0, 1, 2, 3 ...; (ii) the molecule should be flat, i.e. all atoms should lie in one plane; (iii) the compound must be cyclic and have an extended conjugated π system.

Teacher's Note: Hückel: cyclic, planar, fully conjugated, (4n+2) π electrons.

Exam Note: 4n π electrons is anti-aromatic.

Question M70. The halogen atom in aryl halide is comparatively less reactive towards nucleophilic substitution reaction than alkyl halide due to: (a) the formation of less stable carbonium ion (b) resonance stabilization (c) longer carbon-halogen bond (d) sp2-hybridised carbon attached to the halogen

Solution. Answer: (b), (d). (i) Resonance stabilisation; (ii) sp2-hybridised carbon attached to the halogen; (iii) development of partial double bond character in the C−Cl bond (lone pair of halogen delocalised into the ring).

Teacher's Note: C−X bond is shorter and stronger due to resonance and sp2 carbon.

Exam Note: Partial double bond character in aryl C−X.

Question M71. The compound(s) used as refrigerant are: (a) NH3 (b) CCl4 (c) CF4 (d) CF2Cl2

Solution. Answer: (a), (d). NH3 and dichlorodifluoro methane (Freon-12) are used as refrigerant.

Teacher's Note: Refrigerants need easily liquefied gases with high latent heat: ammonia and Freon-12.

Exam Note: Freon-12 is CF2Cl2.

Question M72. Which of the following will give a yellow precipitate with iodine and alkali? (a) 2-Hydroxypropane (b) acetophenone (c) methyl acetate (d) acetamide

Solution. Answer: (a), (b). Iodoform reaction is given by those compounds which contain the COCH3 group (methyl ketone), all sec. alcohols and ethyl alcohol (only primary alcohol). Exceptions: CH3COCH2COOC2H5 (ethyl acetoacetate) and CH3CONH2 (acetamide), although they contain the COCH3 group, do not give iodoform test. (The book's note on secondary alcohols means CH3CH(OH)− type.)

Teacher's Note: Need CH3CO− on carbon or CH3CH(OH)−; esters and amides do not qualify.

Exam Note: Methyl acetate and acetamide fail the test.

Question M73. When nitrobenzene is treated with Br2 in presence of FeBr3, the major product formed is m-bromonitrobenzene. Statements which are related to obtain the m-isomer are: (a) The electron density on meta carbon is more than that on ortho and para positions (b) The intermediate carbonium ion formed after initial attack of Br+ at the meta position is least destabilised (c) Loss of aromaticity when Br+ attacks at the ortho and para positions and not at meta position (d) Easier loss of H+ to regain aromaticity from the meta position than from ortho and para position

Solution. Answer: (a), (b), (d). −NO2 group is an electron withdrawing group and has −I and −M effects, therefore decreases the electron density at o- and p-position and electrophilic attack occurs at m-position.

Teacher's Note: Nitro lowers electron density most at ortho and para, so meta is the least deactivated site.

Exam Note: Meta cation avoids positive charge next to NO2.

Question M74. Base catalysed aldol condensation occurs with: (a) Propionaldehyde (b) Benzaldehyde (c) 2-methylpropionaldehyde (d) 2,2-dimethylpropionaldehyde

Solution. Answer: (a), (c). Aldehydes having α-H atom undergo aldol condensation: CH3CH2CHO and (CH3)2CH−CHO have α-hydrogens; benzaldehyde and 2,2-dimethylpropanal (pivaldehyde) have no α-hydrogen atom.

Teacher's Note: Enolate formation needs an α-hydrogen.

Exam Note: No α-H, no aldol.

Question M75. Which of the following compounds will react with ethanolic KCN? (a) ethyl chloride (b) acetyl chloride (c) chlorobenzene (d) benzaldehyde

Solution. Answer: (a), (b), (d). Ethyl chloride and acetyl chloride undergo nucleophilic substitution reaction with alc. KCN, while benzaldehyde undergoes benzoin condensation and chlorobenzene does not react: C2H5Cl + KCN → C2H5CN + KCl; CH3COCl + KCN → CH3COCN + KCl; 2C6H5CHO →(KCN, alc.) C6H5CHOHCOC6H5.

Teacher's Note: Cyanide substitutes alkyl and acyl chlorides, catalyses benzoin condensation, but cannot attack unactivated aryl chloride.

Exam Note: Aryl chloride is inert to KCN.

Question M76. Keto-enol tautomerism is observed in: (a) C6H5−CHO (b) C6H5−CO−CH3 (c) C6H5−CO−C6H5 (d) C6H5−CO−CH2−CH3

Solution. Answer: (b), (d). Keto-enol tautomerism is shown by those compounds which have α-hydrogen to the CO group.

Teacher's Note: Enolisation needs a hydrogen on the carbon next to C=O.

Exam Note: Check α-H presence.

Question M77. Which of the following are examples of aldol condensation? (a) 2CH3CHO →(dil. NaOH) CH3CHOHCH2CHO (b) 2CH3COCH3 →(dil. NaOH) CH3COH(CH3)CH2COCH3 (c) 2HCHO →(dil. NaOH) CH3OH (d) C6H5CHO + HCHO →(dil. NaOH) C6H5CH2OH

Solution. Answer: (a), (b). The compounds containing α-hydrogen atoms undergo aldol condensation; in aldol condensation, two molecules of the carbonyl compound combine to give a β-hydroxy aldehyde or ketone. (c) and (d) are Cannizzaro-type reactions.

Teacher's Note: Aldol joins two carbonyl molecules via an enolate; HCHO/PhCHO lack α-H so they undergo Cannizzaro.

Exam Note: Product must be a β-hydroxy carbonyl compound.

Question M78. The smallest ketone and its next homologue are reacted with NH2OH to form oxime: (IIT 2006) (a) Two different oximes are formed (b) Three different oximes are formed (c) Two oximes are optically active (d) All oximes formed are optically active

Solution. Answer: (b). Corrected: the book's key prints (b), (c). Acetone reacts with hydroxylamine to form a single oxime (the syn and anti drawings are the same compound), while butanone gives two different (syn and anti, geometrical) oximes: CH3C(=NOH)CH3, and CH3C(=NOH)C2H5 (syn) and (anti). These oximes have no stereocentre, so none is optically active; hence only (b) is correct.

Teacher's Note: C=N geometrical isomerism gives syn/anti forms; optical activity needs a chiral centre or axis, absent here.

Exam Note: Geometrical isomers are not optical isomers.

Question M79. The product of reaction of alcoholic silver nitrite with ethyl bromide is: (a) ethane (b) ethene (c) nitroethane (d) ethyl nitrite

Solution. Answer: (c), (d). 2C2H5Br + 2AgNO2 → C2H5NO2 (major) + C2H5ONO (minor) + 2AgBr. The −NO2 group exists in two tautomeric (ambident) forms, −O−N=O ⇌ −N(=O)=O, so both nitroethane and ethyl nitrite are formed.

Teacher's Note: Nitrite ion is ambident: covalent AgNO2 attacks through N giving nitroalkane mainly, through O giving nitrite ester.

Exam Note: AgNO2 gives mainly RNO2.

Question M80. A positive carbylamine test is given by: (a) N,N-dimethylaniline (b) 2,4-dimethylaniline (c) N-methyl-o-methylaniline (d) p-methylbenzylamine

Solution. Answer: (b), (d). Carbylamine test is given by primary amines: R−NH2 + CHCl3 + 3KOH → R−N≡C + 3KCl + 3H2O (alkyl isocyanide).

Teacher's Note: Only primary amines (−NH2) give isocyanide; (a) is tertiary and (c) secondary.

Exam Note: Primary amine only.

Question M81. Which of the following reactants on reaction with conc. NaOH followed by acidification gives the following lactone (phthalide)? (a) o-C6H4(COOH)(COOCH3) (b) o-C6H4(CHO)(COOH) (c) o-C6H4(CHO)2 (d) o-C6H4(COOH)2

Solution. Answer: (c). o-C6H4(CHO)2 →(alkali, intramolecular Cannizzaro) o-OHC−... hydroxy carboxylate (CHO and CH2O−/COO−) →(H+) o-HOOC−C6H4−CH2OH →(−H2O) phthalide.

Teacher's Note: Intramolecular Cannizzaro gives hydroxy acid; acid then lactonises.

Exam Note: Phthalaldehyde to phthalide.

Question M82. benzene + Cl−CH2CH2CH3 →(AlCl3) P →((i) O2/Δ; (ii) H3O+) Q + phenol. The major products P and Q are: (IIT 2006) (a) n-propylbenzene and CH3CH2CHO (b) n-propylbenzene and CH3COCH3 (c) cumene (isopropylbenzene) and CH3COCH3 (d) cumene and CH3CH2CHO

Solution. Answer: (c). It is cumene hydroperoxide rearrangement reaction: P = cumene (after carbocation rearrangement); cumene →(O2) cumene hydroperoxide →(H3O+) phenol + acetone (Q).

Teacher's Note: Alkylation rearranges primary to isopropyl; cumene process then gives phenol + acetone.

Exam Note: Same as Q63 of the IIT set.

Question M83. The correct statement(s) about the compound given below is (are): (IIT 2008) (2,3-dichlorobutane drawn with Cl on C-2 and C-3 in a staggered projection, Cl groups on the same side as drawn) (a) The compound is optically active (b) The compound possesses centre of symmetry (c) The compound possesses plane of symmetry (d) The compound possesses axis of symmetry

Solution. Answer: (a), (d). Converting the drawn form to a Fischer projection shows that the compound is (R,R) or (S,S)-2,3-dichlorobutane: the molecule has no plane or centre of symmetry, so it is optically active. The molecule possesses an axis of symmetry (C2) perpendicular to the C−C bond.

Teacher's Note: Chiral molecules may still have a rotation axis (C2); absence of plane and centre is what matters.

Exam Note: Chiral means no Sn symmetry element.

Question M84. The correct statement(s) concerning the structures E, F and G is (are): (IIT 2008) E = CH3CH2−CH(CH3)−CO−CH3-type ketone (3-methyl-2-pentanone skeleton) drawn as keto form, F = its enol (C=C−OH toward the CH carbon), G = its isomeric enol (C=C−OH toward the CH3 side) (a) E, F and G are resonance structures (b) E, F and E, G are tautomers (c) F and G are geometrical isomers (d) F and G are diastereomers

Solution. Answer: (b), (c), (d). E (keto form) and its enols F and G are related by keto-enol tautomerism; F and G, which differ in the geometry about the C=C bond (cis/trans, E/Z), are geometrical isomers, and since geometrical isomers are not mirror images, they are also diastereomers. They differ in atom positions, so they are not resonance structures.

Teacher's Note: Keto and enol forms are tautomers; two enols differing only in double-bond geometry are cis-trans diastereomers.

Exam Note: Geometrical isomers are a type of diastereomers.

Question M85. The correct statement(s) about the compound H3C(HO)HC−CH=CH−CH(OH)CH3 (X) is (are): (IIT 2009) (a) The total number of stereoisomers possible for X is 6 (b) The total number of diastereomers possible for X is 3 (c) If the stereochemistry about the double bond in X is trans, the number of enantiomers possible for X is 4 (d) If the stereochemistry about the double bond in X is cis, the number of enantiomers possible for X is 2

Solution. Answer: (a), (d). The molecule has the type Cabcd−Cabab... i.e. two identical asymmetric carbons (n = 2). Optical isomers: enantiomers = 2n−1 = 22−1 = 2; meso = 2(n−2)/2 = 20 = 1 (per double-bond geometry). Geometrical isomers = 2 due to one double bond. Thus total = (2 + 1) × 2 = 6 stereoisomers; with the cis double bond there are 2 enantiomers (and 1 meso), and similarly 2 for trans.

Teacher's Note: Symmetric diol with two stereocentres: one enantiomeric pair plus one meso form per double-bond geometry.

Exam Note: Use 2n−1 enantiomers plus meso when ends are identical.

Question M86. In the reaction 2X + B2H6 → [BH2(X)2]+[BH4]−, the amine(s) X is (are): (IIT 2009) (a) NH3 (b) CH3NH2 (c) (CH3)2NH (d) (CH3)3N

Solution. Answer: (a), (b), (c). Trimethylamine does not have an H atom on N, so it cannot give this ionic product (with B2H6 it forms the simple adduct (CH3)3N→BH3) while the other amines give [BH2(NHR2)2]+[BH4]− by unsymmetrical cleavage of diborane.

Teacher's Note: Unsymmetrical cleavage of B2H6 occurs with small amines; the bulky tertiary amine gives only BH3 adduct.

Exam Note: Tertiary amine cannot give the ionic salt.

Question M87. The correct statement(s) about the following sugars X (sucrose-type: glucose unit linked to a fructose unit through both anomeric carbons) and Y (a glucose−glucose disaccharide with a free anomeric OH) is (are): (IIT 2009) (a) X is a reducing sugar and Y is a non-reducing sugar (b) X is a non-reducing sugar and Y is a reducing sugar (c) The glucosidic linkages in X and Y are α and β, respectively (d) The glucosidic linkages in X and Y are β and α, respectively

Solution. Answer: (b), (c). These are facts for the given sugars: X has no free anomeric OH (both anomeric carbons are tied up in the glycosidic bond), so it is non-reducing; Y has a free hemiacetal OH and is reducing; the glycosidic linkages in X and Y are α and β respectively.

Teacher's Note: Reducing character needs a free anomeric hydroxyl group; sucrose-type linkage ties up both.

Exam Note: Free anomeric OH means reducing sugar.

Question M88. In the Newman projection for 2,2-dimethylbutane (front carbon with CH3 groups and H as shown, X on the top and Y on the bottom), X and Y can respectively be: (IIT 2010) (a) H and H (b) H and C2H5 (c) C2H5 and H (d) CH3 and CH3

Solution. Answer: (b), (d). Answer (from key): the book gives only the key ("follow text"); the Newman projection must be matched with the structure of 2,2-dimethylbutane, CH3−C(CH3)2−CH2−CH3.

Teacher's Note: Identify which carbon is in front and place the three groups of the quaternary carbon around it.

Exam Note: Draw both carbons of the C2−C3 bond.

Question M89. In the reaction phenol →(NaOH(aq)/Br2), the intermediate(s) is (are): (IIT 2010) (a) 2,4-dibromophenoxide ion (b) 4,4-dibromocyclohexa-2,5-dienone (c) 4-bromophenoxide ion (d) 3-bromophenoxide ion

Solution. Answer: (b), (c). Answer (from key): follow mechanism. In alkaline medium phenol forms the phenoxide ion, which is brominated at the para position (4-bromophenoxide) and further, through attack at the already substituted para carbon, gives 4,4-dibromocyclohexa-2,5-dienone before the final 2,4,6-tribromophenol.

Teacher's Note: Phenoxide is attacked at o/p positions; p-bromophenoxide and the 4,4-dibromo dienone appear along the way.

Exam Note: Mechanism question: write the sequence of ions.

Question M90. Amongst the given options, the compound(s) in which all the atoms are in one plane in all the possible conformations (if any), is (are): (IIT 2011) (a) CH2=CH−CH=CH2 (buta-1,3-diene, drawn with substituent as in the book) (b) HC≡C−CH=CH2 (c) H2C=C=C=O-type cumulene (as drawn) (d) H2C=C=CH2

Solution. Answer: (a), (b). Buta-1,3-diene has sp2−sp2 single bond with partial double-bond character (conjugated system), hence the molecule is planar and exists in two conformations: transoid (s-trans) and cisoid (s-cis). Alkynes are planar. In ketenes and allenes (even number of double bonds) the H atoms are out of plane (the two end CH2 planes are perpendicular).

Teacher's Note: Conjugation forces planarity; allene-type cumulenes with an even number of double bonds have perpendicular end groups.

Exam Note: Even number of cumulated C=C: terminal planes perpendicular.

Question M91. The correct functional group X and the reagent/reaction condition Y in the following scheme are: (IIT 2011) X−(CH2)4−X →(Y) ... → (condensation polymer from) HO−C(=O)−(CH2)4−C(=O)−OH (a) X = COOCH3, Y = H2/Ni/heat (b) X = CONH2, Y = H2/Ni/heat (c) X = CONH2, Y = Br2/NaOH (d) X = CN, Y = H2/Ni/heat

Solution. Answer: (c), (d). If X is −CONH2, it will be converted to −CH2NH2 only either on reduction with Na + C2H5OH or LiAlH4 or by Br2/OH− (Hofmann bromamide reaction): H2NOC−(CH2)4−CONH2 →(Br2/OH−) H2N−(CH2)4−NH2. If X is −COOMe it will form diol only on catalytic reduction with Na + C2H5OH or LiAlH4 (ether). If X is −CN it will form −CH2NH2 on reduction with H2/Ni: NC−(CH2)4−CN →(H2/Ni) H2N−CH2(CH2)4CH2−NH2. All these diamines form condensation polymer (polyamide, nylon type) with the dicarboxylic acid.

Teacher's Note: Diamine plus adipic acid gives nylon; Hofmann (CONH2 to NH2) and nitrile hydrogenation both give a diamine.

Exam Note: Need a diamine for polyamide formation.

Question M92. Identify the binary mixture(s) that can be separated into individual compounds, by differential extraction, as shown in the given scheme (extraction with NaOH(aq) gives compound 1 + compound 2 separation, and with NaHCO3(aq) gives another separation): (IIT 2012) (a) C6H5OH and C6H5COOH (b) C6H5COOH and C6H5CH2OH (c) C6H5CH2OH and C6H5OH (d) C6H5CH2OH and C6H5CH2COOH

Solution. Answer: (b), (d). (a) Both are soluble in NaOH, hence cannot be separated by NaOH. (b) Benzoic acid (C6H5COOH) is soluble in NaOH and NaHCO3, while benzyl alcohol (C6H5CH2OH) is not soluble in either, and thus the mixture can be separated. (c) Benzyl alcohol and phenol can be separated by NaOH as only the latter is soluble in NaOH; however, in NaHCO3 both are insoluble, hence cannot be separated by the full scheme. (d) α-Phenyl acetic acid (C6H5CH2COOH) is soluble in NaOH and NaHCO3, whereas benzyl alcohol is not; hence the mixture can be separated.

Teacher's Note: Carboxylic acids dissolve in both NaOH and NaHCO3; phenols only in NaOH; alcohols in neither.

Exam Note: Scheme needs separation by both reagents.

Question M93. Which of the following molecules, in pure form, is (are) unstable at room temperature? (IIT 2012) (a) cyclohexa-1,3-diene (b) cyclobutadiene (c) cyclopentadienone (d) tropone-type cycloheptatrienone (as drawn)

Solution. Answer: (b), (c). Cyclobutadiene and cyclopentadienone are antiaromatic in nature (4π electrons in a planar cyclic conjugated ring), and therefore unstable at room temperature.

Teacher's Note: Planar cyclic conjugated 4n π systems are antiaromatic and unstable; tropone (6 π in ring) is stable.

Exam Note: 4n π electrons: antiaromatic, unstable.

Question M94. With reference to the scheme given, which of the given statement(s) about T, U, V and W is (are) correct? (IIT 2012) T = 4-methyl-tetrahydropyran-2-one (a methyl-substituted δ-lactone, chiral) →(LiAlH4) U (diol) →(CrO3/H+) V; U →(excess (CH3CO)2O) W. (a) T is soluble in hot aqueous NaOH (b) U is optically active (c) Molecular formula of W is C10H18O4 (d) V gives effervescence on treatment with aqueous NaHCO3

Solution. Answer: (a), (c), (d). T (lactone) →(NaOH) the sodium salt of the hydroxy acid (soluble in aqueous NaOH). T →(LiAlH4) the diol U, HOCH2CH2CH(CH3)CH2CH2OH, which has no chiral centre and is thus optically inactive. U →(excess (CH3CO)2O) the diacetate W, molecular formula C10H18O4. U →(CrO3/H+) the dicarboxylic acid V, which effervesces with NaHCO3 due to the presence of COOH groups.

Teacher's Note: LiAlH4 opens the lactone to a symmetric diol, which loses the chiral centre; so U is inactive.

Exam Note: Symmetric diol has no stereocentre.

Question M95. Which of the given statement(s) about N, O, P and Q with respect to M is (are) correct? (IIT 2012) M, N, O, P and Q are Fischer projections (and Newman projections) of 2-chloro-butane-2,3-diol-type stereoisomers (CH2... as drawn in the book). (a) M and N are non-mirror image stereoisomers. (b) M and O are identical. (c) M and P are enantiomers. (d) M and Q are identical.

Solution. Answer: (a), (b), (c). The Fischer projections of M, N, O, P and Q show: M and N are diastereoisomers; M and O are identical; M and P are enantiomers; M and Q are diastereoisomers (so statement (d) is false).

Teacher's Note: Convert each drawing to the same Fischer form, then compare: identical, mirror image, or neither.

Exam Note: Same configuration at every centre means identical.

Question M96. In the following reaction, the product(s) formed is (are): p-cresol (4-methylphenol) →(CHCl3, OH−) ? (JEE Advanced II 2013) P = 2,6-diformyl-4-methylphenol, Q = 4-methyl-4-(dichloromethyl)cyclohexa-2,5-dienone (as drawn), R = 4-(dichloromethyl)-4-methylcyclohex-2-en-1-ol-type (as drawn), S = 2-hydroxy-5-methylbenzaldehyde. (a) P (Major) (b) Q (Minor) (c) R (Minor) (d) S (Major)

Solution. Answer: (b), (d). Reimer-Tiemann reaction: CHCl3 + OH− → :CCl2 + H2O. The phenoxide attacks the carbene at the ortho position to give, after basic hydrolysis, 2-hydroxy-5-methylbenzaldehyde (S, major). Attack at the para (methyl-bearing) carbon gives the dienone H3C(CHCl2)C6H4=O, Q (minor), which does not hydrolyse due to steric hindrance.

Teacher's Note: Ortho attack gives salicylaldehyde (major); para position is blocked by CH3, giving a minor dichloromethyl dienone.

Exam Note: Para-substituted phenol: ortho formylation major.

Question M97. Among P, Q, R and S, the aromatic compound(s) is/are: (JEE Advanced I 2013) 3-chlorocyclopropene →(AlCl3) P; cyclopentadiene →(NaH) Q; hexane-2,5-dione →((NH4)2CO3, 100-115°C) R; tropone →(HCl) S. (a) P (b) Q (c) R (d) S

Solution. Answer: (a), (b), (c), (d). All products obey Hückel rule for aromaticity: P = cyclopropenyl cation (2 π electrons) + [AlCl4]−; Q = cyclopentadienyl anion (6 π electrons) + H2; R = 2,5-dimethylpyrrole (Paal-Knorr synthesis, 6 π electrons); S = hydroxytropylium chloride (tropylium-type cation, 6 π electrons).

Teacher's Note: Each product is a planar cyclic conjugated ion or ring with 4n+2 π electrons (2, 6, 6, 6).

Exam Note: Check Hückel: cyclic, planar, 4n+2.

Question M98. The reactivity of compound Z (3-tert-butylphenol) with different halogens under appropriate conditions is given: X2 = I2 gives mono halo substituted derivative; X2 = Br2 gives di halo substituted derivative; X2 = Cl2 gives tri halo substituted derivative. The observed pattern of electrophilic substitution can be explained by: (JEE Advanced I 2014) (a) the steric effect of the halogen (b) the steric effect of the tert-butyl group (c) the electronic effect of the phenolic group (d) the electronic effect of the tert-butyl group

Solution. Answer: (a), (b), (c). The phenolic OH activates the ortho and para positions (electronic effect); the bulky tert-butyl group hinders the adjacent position (steric effect); and the size of the halogen decides how many positions can be substituted (I mono: 4-iodo... only the least hindered position; Br di: 2- (para and one ortho); Cl tri: all three activated positions 2,4,6 positions, Cl being smallest).

Teacher's Note: OH activates o/p; large halogen or t-butyl blocks crowded positions, so smaller Cl substitutes more.

Exam Note: Pattern comes from steric effects plus OH activation.

Question M99. The correct combination of names for isomeric alcohols with molecular formula C4H10O is/are: (JEE Advanced I 2014) (a) tert-butanol and 2-methylpropan-2-ol (b) tert-butanol and 1,1-dimethylethan-1-ol (c) n-butanol and butan-1-ol (d) isobutyl alcohol and 2-methylpropan-1-ol

Solution. Answer: (a), (c), (d). Isomeric alcohols C4H10O: primary: CH3CH2CH2CH2OH (n-butanol or butan-1-ol) and (CH3)2CHCH2OH (isobutyl alcohol or 2-methylpropan-1-ol); secondary: CH3CH2CH(OH)CH3 (sec-butyl alcohol or butan-2-ol); tertiary: (CH3)3C−OH (tert-butyl alcohol or 2-methylpropan-2-ol). 1,1-Dimethylethan-1-ol is not the IUPAC name of tert-butanol, so (b) is wrong.

Teacher's Note: Match each common name with its correct IUPAC name; the longest chain containing OH is chosen.

Exam Note: Name by longest chain with OH.

Question M100. Compound(s) that on hydrogenation produce(s) optically inactive compound(s) is (are): (JEE Advanced I 2014) (a) (3-methylpent-... as drawn: H, Br on a chiral carbon with CH3 and an alkenyl group) (b) CH2=CH−C*H(Br)−CH3 (c) 3-bromo-2-methylbut-... (CH2=C(CH3)−C*HBr−CH3) (d) CH2=CH−C*HBr−CH2CH3-type as drawn

Solution. Answer: (b), (d). Hydrogenation (H2, cat.): (a) gives an optically inactive compound as drawn in the book; (b) CH2=CH−CHBrCH3 → CH3CH2CHBrCH3: the product still has a chiral carbon with ethyl... (as printed in the book's working: optically inactive); (c) gives an optically active product; (d) gives an optically inactive product. The book's key is (b), (d); the intermediate structures could not be read reliably from the scan, so please verify (a)/(b) against the printed drawings.

Teacher's Note: After hydrogenation, check whether the stereocentre still has four different groups; if two groups become identical, activity is lost.

Exam Note: Loss of one distinct group removes the chirality.

Question M101. Positive Tollens' test is observed for: (JEE Advanced I 2016) (a) CH2=CH−CHO-type, H−CO−CH=CH2 (acrolein as drawn) (b) benzaldehyde, C6H5CHO (c) benzoin, Ph−CH(OH)−CO−Ph (d) Ph−CH=CH−CO−Ph (chalcone)

Solution. Answer: (a), (b), (c). Aldehydes, formic acid, formic esters and α-hydroxy ketones (an OH attached next to a powerful electron withdrawing group such as ketone) show positive Tollens' test: acrolein and benzaldehyde give a silver mirror, and benzoin Ph−CH(OH)−CO−Ph also gives a silver mirror. α,β-Dicarbonyl compounds also respond to Tollens' test on warming slightly. Chalcone has no aldehyde or α-hydroxy ketone, so no test.

Teacher's Note: Silver mirror needs a reducing group: aldehyde or α-hydroxy ketone; chalcone has neither.

Exam Note: Benzoin gives Tollens' despite being a ketone.

Question M102. The correct statement(s) about the following reaction sequence is (are): cumene (C9H12) →((i) O2; (ii) H3O+) P →(CHCl3/NaOH) Q (major) + R (minor); Q →(NaOH, PhCH2Br) S. (JEE Advanced I 2016) (a) R is steam volatile (b) Q gives dark violet coloration with 1% aqueous FeCl3 solution (c) S gives yellow precipitate with 2,4-dinitrophenylhydrazine (d) S gives dark violet coloration with 1% aqueous FeCl3 solution

Solution. Answer: (b), (c). Cumene →(O2; H3O+) phenol (P) →(CHCl3/NaOH, Reimer-Tiemann) salicylaldehyde Q (major) + p-hydroxybenzaldehyde R (minor); Q →(NaOH, PhCH2Br) o-benzyloxybenzaldehyde S. Q is steam volatile because of intramolecular H-bonding, not R, so (a) is false. Q and R give positive test with 1% aqueous FeCl3 (free phenolic OH); S has no free OH, so (d) is false. Q, R and S give positive 2,4-dinitrophenylhydrazine test (CHO group).

Teacher's Note: Intramolecular H-bond makes ortho isomer steam-volatile; FeCl3 needs free phenolic OH; DNP needs C=O.

Exam Note: S has no phenolic OH, so no FeCl3 colour.

Question M103. Among the following, reaction(s) which gives(give) tert-butyl benzene as the major product is (are): (JEE Advanced II 2016) (a) benzene + (CH3)3C−Br / NaOC2H5 (b) benzene + isobutyl chloride / AlCl3 (c) benzene + isobutylene / H2SO4 (d) benzene + isobutyl alcohol / BF3·OEt2

Solution. Answer: (b), (c), (d). (b) (CH3)2CHCH2Cl + AlCl3 → primary carbocation, which undergoes H− shift to the tert-butyl carbocation (CH3)3C+, which attacks benzene (electrophilic substitution) to give tert-butylbenzene. (c) Isobutylene + H+ → tert-butyl carbocation. (d) BF3 in ether removes OH (the OH is a poor leaving group, but due to the lone pair on O it becomes a good leaving group) and leads to carbocation, which rearranges to tert-butyl. Note: benzene neither reacts with sodium ethoxide nor with t-bromide; t-butyl bromide with sodium ethoxide shows E1 and E2 elimination to give isobutylene and ethanol; neither of these two reacts with C6H6.

Teacher's Note: Friedel-Crafts alkylation with rearrangement or tertiary-cation sources gives t-butylbenzene; base conditions do not.

Exam Note: Carbocation rearranges to the tertiary form.

Question M104. Reagent(s) which can be used to bring about the following transformation is (are): (JEE Advanced II 2016) the aldehyde CHO of an epoxy tert-butyl ester acid is reduced to CH2OH while the COOH, the tert-butyl ester and the epoxide stay intact. (a) LiAlH4 in (C2H5)2O (b) BH3 in THF (c) NaBH4 in C2H5OH (d) Raney Ni/H2 in THF

Solution. Answer: (c), (d). NaBH4/C2H5OH and Raney Ni/H2 in T.H.F. do not reduce acid (−COOH), ester (−COOR) and epoxide, but they reduce the aldehyde to the primary alcohol. LiAlH4 and BH3 would also reduce COOH/ester/epoxide.

Teacher's Note: Choose a mild reductant that touches only the aldehyde; LiAlH4 and BH3 are too strong.

Exam Note: NaBH4 reduces aldehydes and ketones only.

Question M105. The IUPAC name(s) of the following compound (p-chlorotoluene, H3C−C6H4−Cl) is (are): (JEE Advanced I 2017) (a) 4-methylchlorobenzene (b) 4-chlorotoluene (c) 1-chloro-4-methylbenzene (d) 1-methyl-4-chlorobenzene

Solution. Answer: (b), (c). 1-Chloro-4-methylbenzene (substituents named alphabetically, lowest locants). Since "toluene" is accepted by IUPAC as a name of the parent carbon chain (ring), the compound can also be named as 4-chlorotoluene.

Teacher's Note: Prefixes are cited alphabetically (chloro before methyl); toluene is an accepted parent name.

Exam Note: Alphabetical order of substituents decides the name.

Question M106. The correct statement(s) for the following addition reactions is (are): (JEE Advanced I 2017) (i) trans-CH3CH=CHCH3-type alkene (as drawn: H3C and H on one side, H and CH3 on the other) →(Br2/CHCl3) M and N; (ii) cis-CH3CH=CHCH3-type alkene →(Br2/CHCl3) O and P (a) (M and O) and (N and P) are two pairs of diastereomers (b) Bromination proceeds through trans-addition in both the reactions (c) O and P are identical molecules (d) (M and O) and (N and P) are two pairs of enantiomers

Solution. Answer: (a), (b). Br2 adds through the cyclic bromonium ion (non-classical carbocation mechanism) followed by anti (trans) attack of Br−. M and N come from reaction (i), O and P from (ii); as drawn in the book, (M and O) and (N and P) are pairs of diastereomers of each other, and O and P are enantiomers (not identical), so (c) and (d) are false.

Teacher's Note: Bromonium ion forces anti addition; the products of the two alkene isomers are diastereomeric.

Exam Note: Anti addition: cis gives racemate, trans gives meso.

Question M107. Compounds P and R upon ozonolysis produce Q and S, respectively. The molecular formula of Q and S is C8H8O. Q undergoes Cannizzaro reaction but not haloform reaction, whereas S undergoes haloform reaction but not Cannizzaro reaction. (i) P →((i) O3/CH2Cl2; (ii) Zn/H2O) Q (C8H8O); (ii) R →((i) O3/CH2Cl2; (ii) Zn/H2O) S (C8H8O). The option(s) with suitable combination of P and R, respectively, is (are): (JEE Advanced II 2017) (a) p-methylstyrene and α-methylstyrene (b) 2-methyl-1-(2-methylphenyl)propene-type pair as drawn (c) m-methyl-propenylbenzene (1-(3-methylphenyl)propene) and the 2-methyl-1-aryl-propene type, as drawn (d) p-methylstyrene and the isomeric 4-methyl-isopropenyl pair as drawn

Solution. Answer: (a), (c). (a) p-CH3C6H4CH=CH2 →(O3; Zn/H2O) p-CH3C6H4CHO + HCHO: the aldehyde has no α-H and shows Cannizzaro reaction. C6H5C(CH3)=CH2 (α-methylstyrene) →(O3; Zn/H2O) C6H5COCH3 (acetophenone) + HCHO: shows haloform reaction. (c) m-CH3C6H4CH=CHCH3 → m-CH3C6H4CHO (Cannizzaro) + CH3CHO; and the aryl-substituted 2-methyl-propene → m-CH3C6H4COCH3 (haloform) + CH3COCH3.

Teacher's Note: C8H8O aromatic aldehyde (tolualdehyde) gives Cannizzaro; methyl ketone (acetophenone type) gives haloform.

Exam Note: Aldehyde without α-H: Cannizzaro; CH3CO−: haloform.

Question M108. For the following compounds, the correct statement(s) with respect to nucleophilic substitution reaction is (are): (I) benzyl bromide, C6H5CH2Br (II) cyclohexylmethyl bromide (III) tert-butyl bromide (IV) 1-bromo-1-phenylethane (JEE Advanced II 2017) (a) I and II follow SN2 mechanism (b) the order of reactivity for I, III and IV is: IV > I > III (c) I and III follow SN1 mechanism (d) compound IV undergoes inversion of configuration

Solution. Answer: (a), (c), (d). When the medium is highly polar and protic: SN1 order: benzyl > allyl > 3° > 2° > 1° > methyl > phenyl halide; hence option (c) is correct. SN2 order: phenyl > methyl > 1° > 2° > 3° > allyl > benzyl halide (as printed). (I) and (II) will follow SN2 when the medium is polar aprotic and the nucleophile is strong and in high concentration. Option (d) is correct as IV with Nu− by SN2 gives inversion of configuration. Option (b) is incorrect for both SN1 and SN2 conditions.

Teacher's Note: Primary halides (I, II) prefer SN2; tertiary (III) SN1; secondary benzylic (IV) can show inversion under SN2.

Exam Note: Match substrate class to mechanism and medium.

JEE Mathematics: P Bahadur Solutions for P Bahadur Solutions Numerical Chemistry Chapter 19 Structure Reactions Based Problems Part 4

Chapter-wise P Bahadur Solutions: P Bahadur Solutions Numerical Chemistry Chapter 19 Structure Reactions Based Problems Part 4

Review detailed solutions for JEE Mathematics. The P Bahadur Solutions Numerical Chemistry Chapter 19 Structure Reactions Based Problems Part 4 PDF provides comprehensive answers mapped to standard P Bahadur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.