Official P Bahadur Textbook Solutions: JEE Chemistry Chapter 20 Qualitative Estimations
Explore reliable textbook solutions for Chapter 20 Qualitative Estimations tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Chapter-wise Solutions for Chemistry: Chapter 20 Qualitative Estimations
Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Chapter 20 Qualitative Estimations - Objective Problems, Questions 19-252, Previous Year Problems and More Than One Answer Correct Problems
Objective Problems (One Answer Correct)
Question 19. Which of the following sulphuryl halides is not known?
(a) SO2F2
(b) SO2Cl2
(c) SO2FBr
(d) SO2Br2
Solution. Answer: (d). SO2Br2 and SO2I2 are unstable and are not known (key: "it is a fact").
Teacher's Note: Know which sulphuryl halides exist: F, Cl and mixed F/Br are stable; Br and I are not.
Exam Note: Fact-recall MCQ; one mark.
Question 20. Tellurium hydride on dissolution in water gives:
(a) H2Te + H2O ⇌ H3O+ + HTe–
(b) H2Te + H2O ⇌ H3Te+ + OH–
(c) H2Te + H2O ⇌ TeO + 2H2
(d) none of the above
Solution. Answer: (a). H2Te belongs to the hydrides of the sulphur family (H2S, H2Se) and behaves as a weak acid in water.
Teacher's Note: Group 16 hydrides are acidic, not basic; acidity increases down the group.
Exam Note: Write ionisation as proton transfer to water.
Question 21. H2O2 cannot be formed by the following reaction:
(a) electrolysis of 50% H2SO4
(b) hydrolysis of H2S2O8
(c) action of H2O on BaO2
(d) action of H2O on MnO2
Solution. Answer: (d). MnO2 is a dioxide and contains no O–O (peroxide) bond, so water cannot give H2O2 from it.
Teacher's Note: Only true peroxides (BaO2, Na2O2) give H2O2 with acid or water.
Exam Note: Distinguish peroxide from dioxide.
Question 22. Which characteristic is not shown by S4N4?
(a) It has cage structure
(b) It has two S–S strong bonds
(c) Thermochromic
(d) Stable in air but detonates on shock, grinding or sudden heating
Solution. Answer: (b). S4N4 has two weak S–S bonds in its cage structure. It is thermochromic: colourless at liquid-N2 temperature, orange-yellow at room temperature, red at 100 °C.
Teacher's Note: The S–S bonds are weak, not strong; that makes the cage explosive.
Exam Note: Pick the false property.
Question 23. Which does not show thermochromic property?
(a) ZnO
(b) S4N4
(c) CuSO4·5H2O
(d) KMnO4
Solution. Answer: (d). ZnO (white to yellow on heating), S4N4 and CuSO4·5H2O change colour on heating; KMnO4 does not.
Teacher's Note: Thermochromism is a reversible colour change with temperature.
Exam Note: Name examples of thermochromic solids.
Question 24. Among the following groups, the last element of which group is not radioactive is:
(a) group 1
(b) group 17
(c) group 18
(d) group 14
Solution. Answer: (d). Pb, the last element of group 14, is not radioactive (Fr, At and Rn are radioactive).
Teacher's Note: Last members: Fr (1), At (17), Rn (18) are radioactive; Pb is stable.
Exam Note: Recall last elements of groups.
Question 25. Which of the following does not give oxygen on heating?
(a) KClO3
(b) Zn(ClO3)2
(c) K2Cr2O7
(d) (NH4)2Cr2O7
Solution. Answer: (d). (NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O (volcano reaction); no oxygen is evolved.
Teacher's Note: Internal redox: NH4+ consumes the oxygen of dichromate.
Exam Note: Write the decomposition products.
Question 26. Which compounds of Xe contain lone pair of electrons?
(a) [XeO6]4–
(b) XeO3F2
(c) XeO4
(d) XeO2F2
Solution. Answer: (d). Xe has 8 valence electrons. In [XeO6]4–, XeO3F2 and XeO4 all are used in bonding (no lone pair); XeO2F2 (see-saw) has one lone pair.
Teacher's Note: Count bond pairs against the 8 electrons of Xe.
Exam Note: Show electron count for each.
Question 27. Which of the following does not contain pπ–dπ bonding?
(a) PF3
(b) Oxoacid of sulphur
(c) Oxoacid of phosphorus
(d) PF5
Solution. Answer: (d). PF5 has no pπ–dπ bonding (only σ bonds, sp3d); PF3 has back bonding, and oxoacids of S and P have P/S=O pπ–dπ bonds.
Teacher's Note: Single-bonded halides of a saturated central atom have no π bonds.
Exam Note: State why PF5 lacks π bonds.
Question 28. The oxidation number and hybridisation of xenon in barium perxenate is:
(a) +6, sp3
(b) +8, sp3d2
(c) +6, sp3d
(d) +8, sp3
Solution. Answer: (b). Perxenate ion is [XeO6]4–: oxidation number of Xe = +8 (6 × (–2) + x = –4 gives x = +8), six σ bonds and no lone pair, so sp3d2. It has no peroxide bond.
Teacher's Note: Perxenate is not a peroxy compound; get O.N. from the ion charge.
Exam Note: Show 6(–2) + x = –4.
Question 29. Which among the following transition elements have their density more than 5 g/cm3?
(a) Sc
(b) Y
(c) Ti
(d) Ir
Solution. Answer: (d). Sc, Y and Ti (about 4.5 g/cm3) have density less than 5 g/cm3; Ir (22.6 g/cm3) is far denser.
Teacher's Note: Light d-block metals are Sc, Ti, Y; 5d metals are very dense.
Exam Note: Recall approximate densities.
Question 30. Which of the transition metal elements has highest density?
(a) Os
(b) Ir
(c) Pt
(d) Au
Solution. Answer: (b). Os (22.57 g/cm3) and Ir (22.61 g/cm3) have the highest densities; Ir is the highest.
Teacher's Note: Os and Ir are nearly equal; Ir is just higher.
Exam Note: Quote the two densities.
Question 31. Highest m. pt. of transition element exists for:
(a) Ta
(b) W
(c) Re
(d) Zn
Solution. Answer: (b). Only the three transition elements Ta (3000 °C), W (3410 °C) and Re (3180 °C) have m.p. above 3000 °C; Zn melts at 420 °C. W is highest.
Teacher's Note: Tungsten has the highest m.p. of all metals.
Exam Note: Compare the three values.
Question 32. The colours of AgCl (white), AgBr (pale yellow) and AgI (yellow) is due to the fact that:
(a) Cl2, Br2 and I2 are green, brown and violet respectively
(b) Ag+ polarises the anions in the order: I– > Br– > Cl–
(c) Ag+ has 4d10 configuration
(d) the anions Cl–, Br– and I– have np6 configuration
Solution. Answer: (b). The colour arises due to the different degree of polarisation of the halide ions by Ag+; larger I– is polarised most.
Teacher's Note: Polarisation increases with anion size, deepening colour.
Exam Note: Link anion size to polarisation.
Question 33. VO43–, CrO42– and MnO4– are pale yellow, strong yellow and intense purple respectively in aqueous solution. The darkening of colour is due to:
(a) charge transfer
(b) d–d transition
(c) half-filled d-sub-shells
(d) increasing number of unpaired electron
Solution. Answer: (a). In MnO4– an electron is momentarily transferred from O to the metal, changing O2– to O– and reducing the oxidation state of the metal (ligand-to-metal charge transfer).
Teacher's Note: These ions are d0, so colour cannot come from d–d transitions.
Exam Note: Note d0 configuration of the metal.
Question 34. The complex [Fe(H2O)5NO]2+ formed during brown ring test for NO3–; select the wrong statement:
(a) Is coloured due to charge transfer
(b) has no unpaired electrons
(c) Has magnetic moment 3.9 BM
(d) Has Fe in +1 oxidation state and NO in +1 oxidation state
Solution. Answer: (b). All statements except (b) are correct: the brown ring complex has Fe(I) (3d7) and NO+, with three unpaired electrons (μ = √15 ≈ 3.9 BM), so "no unpaired electrons" is wrong.
Teacher's Note: μ = √(n(n+2)) with n = 3 gives 3.87 BM.
Exam Note: Compute n from 3.9 BM.
Question 35. For the given values, the correct statement is: [Fe(H2O)6]3+ + e → [Fe(H2O)6]2+, E° = +0.77 V; [Fe(CN)6]3– + e → [Fe(CN)6]4–, E° = +0.36 V
(a) It is easier to oxidise [Fe(H2O)6]2+ than [Fe(CN)6]4–
(b) It is easier to oxidise [Fe(CN)6]4– than Fe[(H2O)6]2+
(c) [Fe(CN)6]3– is more stable than Fe[(H2O)6]3+
(d) [Fe(CN)6]3– is less stable than Fe(H2O)63+
Solution. Answer: (b). E°(oxidation) is the negative of E°(reduction): oxidation of [Fe(CN)6]4– has E° = –0.36 V, larger (less negative) than –0.77 V for [Fe(H2O)6]2+, so [Fe(CN)6]4– is oxidised more easily. Stability of a complex needs stability constants.
Teacher's Note: Lower reduction potential means easier oxidation of the reduced form.
Exam Note: Reverse sign to compare oxidation.
Question 36. Select the incorrect statement for FeCl3:
(a) It is yellow-brown in colour in solid state
(b) It is used as mordant in dyeing and as an oxidant
(c) It is used as catalyst in manufacture of CCl4
(d) It does not sublime on heating
Solution. Answer: (d). FeCl3 sublimes at 300 °C, so (d) is incorrect.
Teacher's Note: Anhydrous FeCl3 is covalent and sublimes.
Exam Note: Recall sublimation of FeCl3.
Question 37. Select the correct statements:
(a) Vitamin B-12 has Co
(b) Co2+ ions are very stable and difficult to oxidise
(c) [Co(NH3)6]2+ are readily oxidised to [Co(NH3)6]3+
(d) All of the above
Solution. Answer: (d). All are correct (key: "all are correct"): vitamin B-12 contains cobalt; simple Co2+ is stable, while its ammine complex is readily oxidised to Co(III).
Teacher's Note: Ligands that stabilise Co(III) make Co(II) complexes reducing.
Exam Note: Recall Co(II)/Co(III) stability.
Question 38. The stable oxidation state of Cu, Ag and Au respectively:
(a) Cu+, Ag+, Au+
(b) Cu2+, Ag+, Au2+
(c) Cu+, Ag+, Au3+
(d) Cu2+, Ag+, Au3+
Solution. Answer: (d). This is an experimental fact: in water Cu2+, Ag+ and Au3+ are the stable states.
Teacher's Note: Hydration energy makes Cu2+ stable in water.
Exam Note: Recall stable aqueous states.
Question 39. Select the incorrect statement:
(a) H2O2 can be detected by Ti4+ ion where a yellow-orange solution of [TiO2·OH(H2O)n]+ is formed
(b) BrF3 is potential non-aqueous ionising solvent
(c) ICl can be used for iodination as well as chlorination of organic compounds
(d) NaBr on reaction with ICl gives NaCl
Solution. Answer: (d). NaBr + ICl → Na+[BrICl]–, not NaCl, so (d) is incorrect.
Teacher's Note: ICl acts as a Lewis acid, accepting Br–.
Exam Note: Write the addition product.
Question 40. The reaction which do not occur is:
(a) Ni(CO)4 + 4PF3 → Ni(PF3)4 + 4CO
(b) PCl3 + 6NH3 → P(NH2)3 + 3NH4Cl
(c) PCl3 + 3H2O → H3PO3 + 3HCl
(d) SbCl3 + 3H2O → H3SbO3 + 3HCl
Solution. Answer: (d). SbCl3 + H2O → SbOCl + 2HCl (partial hydrolysis gives oxychloride), so complete hydrolysis to H3SbO3 does not occur.
Teacher's Note: Sb and Bi chlorides hydrolyse only to oxychlorides.
Exam Note: Write the SbOCl equation.
Question 41. The reaction which do not occur is:
(a) COCl2 + 2NH3 → NH2CONH2 + 2HCl
(b) Fe2O3 + 3CO → 2Fe + 3CO2
(c) 5CO + I2O5 → 5CO2 + I2
(d) NaNH2 + C →(750 °C) NaH + HCN
Solution. Answer: (d). The actual reaction is NaNH2 + C → NaCN + H2 (not NaH + HCN).
Teacher's Note: Sodamide with carbon gives cyanide (Castner process).
Exam Note: Name the correct products.
Question 42. Select the correct statement:
(a) Lithopone is BaS + ZnSO4
(b) Ammoniacal CuCl absorbs CO and CO2
(c) H2 can be dried by conc. H2SO4
(d) Wood metal melts at b.pt. of water
Solution. Answer: (d). Key answer (d): wood metal, an alloy of Bi, Pb, Sn and Cd, has a very low m.p. of about 71 °C. (Note: (c) is also commonly regarded as true; answer given as printed.)
Teacher's Note: Wood metal melts near 70 °C, below water's boiling point.
Exam Note: Check each statement; (a) is BaSO4 + ZnS.
Question 43. The decreasing order of molar conductances of the given compounds in their aqueous solution is: (I) K[Co(NH3)2(NO2)4]; (II) [Cr(NH3)3(NO2)3]; (III) [Cr(NH3)5NO2]3[Co(NO2)6]2; (IV) Mg[Cr(NH3)(NO2)5]
(a) III > IV > I > II
(b) I < II < IV < III
(c) II > I > IV > III
(d) III < II < IV < I
Solution. Answer: (a). Conductance rises with the number of ions: (III) gives 5 ions, (IV) 2 ions with a 2+ cation, (I) 2 ions with 1+ and 1–, and (II) is a non-ionic neutral complex with minimum conductance. Order III > IV > I > II.
Teacher's Note: Molar conductance depends on number and charge of ions.
Exam Note: Count ions for each salt.
Question 44. Which complex of Co2+ will show the weakest crystal field splitting?
(a) [Co(CN)6]4–
(b) [Co(NH3)6]2+
(c) [Co(en)3]2+
(d) [CoCl6]4–
Solution. Answer: (d). Cl– is at the bottom of the spectrochemical series (weak-field ligand), so [CoCl6]4– has the smallest splitting.
Teacher's Note: CN– > en > NH3 > Cl– in field strength.
Exam Note: Quote spectrochemical order.
Question 45. The effective atomic number rule (EAN) is obeyed by:
(a) [PtCl6]2–
(b) [Ni(NH3)6]2+
(c) [Fe(CN)6]3–
(d) [Pt(NH3)4]2+
Solution. Answer: (a). EAN of Pt in [PtCl6]2– = 78 – 4 + 12 = 86 (radon).
Teacher's Note: EAN = Z – oxidation state + 2 × number of ligands.
Exam Note: Show 78 – 4 + 12 = 86.
Question 46. The EAN rule is not obeyed by:
(a) Fe(CO)5
(b) CO2(CO)8
(c) H2[Cr(CO)5]
(d) [Cr(NH3)6]Cl3
Solution. Answer: (d). EAN of Cr in [Cr(NH3)6]3+ = 24 – 3 + 12 = 33, not the nearest noble gas (Kr, 36).
Teacher's Note: Carbonyls usually follow EAN; ammine complexes often do not.
Exam Note: Show 24 – 3 + 12 = 33.
Question 47. Select the wrong statement about [CoI4]2– ion:
(a) It is high spin complex
(b) It is a low spin complex
(c) It is sp3-hybridised with three unpaired electron
(d) Its magnetic moment is 3.5 BM
Solution. Answer: (b). Co2+ in [CoI4]2– is 3d7, tetrahedral, sp3, with three unpaired electrons (μ ≈ 3.9 BM, quoted 3.5 BM); weak-field I– gives a high-spin complex, so "low spin" is wrong.
Teacher's Note: Tetrahedral complexes are almost always high spin.
Exam Note: Give d-electron count and geometry.
Question 48. Which of the following forms square planar complex and diamagnetic in nature?
(a) Cr2+ in weak field ligand
(b) Ag2+ in weak or strong field ligand
(c) Ni2+ in strong field
(d) Co2+ in strong field
Solution. Answer: (c). Cr2+, Ag2+, Ni2+ and Co2+ have 4, 1, 2 and 1 unpaired electrons; only Ni2+ (d8) can pair its electrons in a strong field and give dsp2 square planar, diamagnetic.
Teacher's Note: d8 plus strong field gives square planar, diamagnetic.
Exam Note: Draw d8 pairing.
Question 49. Which one is not correct?
(a) Purification of Ti using I2 is called zone refining
(b) Extraction of Ti from TiCl4 by Mg is called Kroll process
(c) Extraction of Ti from TiCl4 by Na is called IMI process
(d) Purification of Ni using CO is called Mond's process
Solution. Answer: (a). Purification of Ti with I2 is the van Arkel process, not zone refining.
Teacher's Note: Van Arkel: iodide formed then decomposed on hot filament.
Exam Note: Match each process to its name.
Question 50. Select the incorrect statement:
(a) Salt like hydrides on reaction with water give H2
(b) H2 is obtained in excess in chlor-alkali industries
(c) CO is oxidised by NaH
(d) CO acts as acid on reaction with NaOH at high P and T
Solution. Answer: (c). CO is reduced (not oxidised) by NaH: 2CO + NaH → HCOONa + C.
Teacher's Note: NaH is a strong reducing agent, so it reduces CO.
Exam Note: Identify which species is reduced.
Question 51. Select the incorrect statement:
(a) Melting point order: (CH4 > SiH4) < GeH4 < SnH4
(b) Boiling point order: CH4 < SiH4 < GeH4 < SnH4
(c) Hydrides of carbon family are mostly covalent and sp3-hybridised
(d) PbH4 is ionic hydride
Solution. Answer: (d). PbH4 is also covalent (like the other group 14 hydrides), so (d) is incorrect.
Teacher's Note: Group 14 hydrides are covalent, not ionic.
Exam Note: State bond type of PbH4.
Question 52. Carbonatoquotetraamminecobalt (III) chloride does not show .......... isomerism:
(a) geometric
(b) hydrate
(c) coordination
(d) optical
Solution. Answer: (d). Isomers possible include [Co(NH3)4CO3]Cl·2H2O, [Co(NH3)4(H2O)2]CO3Cl and [Co(NH3)4H2O Cl]CO3·H2O: these show cis/trans (geometric), hydrate and coordination isomerism; optical isomerism is not shown.
Teacher's Note: With a chelating CO32– and four NH3, a symmetry plane exists.
Exam Note: Check for a mirror plane.
Question 53. The possible number of isomers of the complex [Cr(NH3)(OH)2Cl3]2– are:
(a) 1
(b) 2
(c) 3
(d) 4
Solution. Answer: (c). The complex has three geometrical isomers (key shows three octahedral arrangements of NH3, 2 OH and 3 Cl).
Teacher's Note: Arrange the two OH and NH3 positions around Cr.
Exam Note: Count arrangements of OH relative to NH3.
Question 54. Which of the following is optically active? [Co(en)2Cl2]+ drawn as four octahedral structures (a)–(d) (figures not reproduced).
(a) Structure (a)
(b) Structure (b)
(c) Structure (c)
(d) Structure (d)
Solution. Answer: (b). The cis form of [Co(en)2Cl2]+ has no plane of symmetry and is optically active; the other structures possess a plane of symmetry. Key answer (b).
Teacher's Note: Optical activity needs absence of symmetry planes.
Exam Note: Look for a mirror plane in each drawing.
Question 55. The IUPAC name for [Pt(py)4][PtCl4] is:
(a) tetrapyridinium platinum (II) tetrachloroplatinate (II)
(b) tetrapyridinium platinum (II) tetrachloroplatinate (II) [as printed]
(c) tetrachloroplatinum (II) tetrapyridine platinum (II)
(d) tetrachloroplatinate (II) tetrapyridine platinate (II)
Solution. Answer: (a). Cation [Pt(py)4]2+ is named first (tetrapyridine platinum(II)), then the anion [PtCl4]2– as tetrachloroplatinate(II). Answer (a) as printed.
Teacher's Note: Name cation first; anionic complex ends in –ate.
Exam Note: Cation first, anion second.
Question 56. Coordination number for which ion cannot exceed than two:
(a) Cu+
(b) Cu2+
(c) Al3+
(d) Zn2+
Solution. Answer: (a). Coordination numbers of Cu+, Cu2+, Al3+ and Zn2+ are 2, 4, 6 and 4 respectively; only Cu+ is limited to 2.
Teacher's Note: Cu(I) forms linear two-coordinate complexes.
Exam Note: Recall typical coordination numbers.
Question 57. EDTA in form of its dihydrogen calcium salt is used as antidote for ......... poisoning in body:
(a) Pb
(b) Sn
(c) Ca
(d) Ba
Solution. Answer: (a). It is a fact: Ca-EDTA exchanges Ca2+ for Pb2+, giving a soluble Pb-EDTA complex excreted in urine.
Teacher's Note: Chelation therapy: Pb2+ binds EDTA more strongly than Ca2+.
Exam Note: Explain why the calcium salt is used.
Question 58. Which of the following change shows an increase in bond order and a change in magnetic behaviour?
(a) N2 → N2+
(b) C2 → C2+
(c) NO → NO+
(d) O2 → O2+
Solution. Answer: (c). NO has bond order 2.5 and 15 electrons (paramagnetic); NO+ has bond order 3 and 14 electrons (diamagnetic). Both bond order and magnetism change.
Teacher's Note: Remove the odd antibonding electron: paramagnetic to diamagnetic.
Exam Note: Give bond orders and electron counts.
Question 59. The species having bond order different from that in CO is:
(a) NO–
(b) NO+
(c) CN–
(d) N2
Solution. Answer: (a). CO, NO+, CN– and N2 are isoelectronic (14 e–) with bond order 3; NO– has 16 e– and bond order 2.
Teacher's Note: Count electrons: 14 means bond order 3.
Exam Note: Use isoelectronic idea.
Question 60. Which of the following pairs have isostructural nature:
(a) SO32– and NO3–
(b) BF3 and NF3
(c) BrO3– and XeO3
(d) SF4 and XeF4
Solution. Answer: (c). BrO3– and XeO3 are both sp3-hybridised and pyramidal; the other pairs differ in shape.
Teacher's Note: Same hybridisation and lone pairs give same shape.
Exam Note: Compare lone pairs and shape.
Question 61. Which of the following oxide is neutral?
(a) MnO2
(b) N2O3
(c) CO2
(d) Mn2O7
Solution. Answer: (a). MnO2 is the neutral oxide here (as given by the book); N2O3, CO2 and Mn2O7 are acidic.
Teacher's Note: Mn oxides: acidity rises with oxidation state.
Exam Note: Rank acidity of Mn oxides.
Question 62. Which of the following statements about pH of salt solution is incorrect?
(a) pH of NaF < pH of NaCN
(b) pH of Na2SO3 < pH of Na2TeO3
(c) pH of NaOBr < pH of NaOCl
(d) pH of CH3COONa < pH of NaCN
Solution. Answer: (c). HOCl is a stronger acid than HOBr, so OCl– is a weaker base than OBr–; NaOBr has the higher pH, so (c) is incorrect.
Teacher's Note: Weaker acid gives stronger conjugate base and higher pH.
Exam Note: Compare acid strengths of HOCl and HOBr.
Question 63. Select the incorrect statement about terminology of meta, pyro, hypo, ortho and peroxyacids:
(a) The meta acid has one water molecule fewer than an ortho acid of the same element in same oxidation state per atom of central element, e.g., HPO3 is meta phosphoric acid
(b) The pyro acid has one half water molecule fewer than an ortho acid per atom of central element, e.g., H4P2O7 pyrophosphoric acid
(c) The hypo acid has an oxidation state lower than the ic acid, e.g., H3PO2 is hypo phosphorus acid
(d) The per acid has same oxidation state as in ic acid, e.g., HClO4
Solution. Answer: (d). Per acids have an oxidation state higher than the ic acid (HClO4: +7 versus HClO3: +5), so (d) is incorrect.
Teacher's Note: Prefix per means higher oxidation state.
Exam Note: Compare Cl in HClO3 and HClO4.
Question 64. Select the incorrect statement:
(a) Pure HClO4 does not conduct electricity
(b) Solid hydrate HClO4·H2O on melting conducts electricity
(c) H-bonding is extensive in pure HClO4
(d) H-bonding is more powerful in HClO4·H2O than HClO4
Solution. Answer: (d). In HClO4·H2O the ions are localised by lattice forces, so H-bonding is not extensive as in HClO4; (d) is incorrect.
Teacher's Note: Hydrate is ionic (H3O+ClO4–) with less H-bonding.
Exam Note: State ionic nature of the hydrate.
Question 65. Which of the following does not favour to call CN– as pseudohalide ion?
(a) Cyanogen undergoes disproportionation like disproportionation of halogens
(b) It forms a wide variety of complexes like halide ions
(c) CN– acts as oxidising agent like halogens
(d) CN– acts as reducing agent like halide ions
Solution. Answer: (c). C2N2 + 2OH– → CN– + CNO– + H2O (like Cl2 + 2OH– → Cl– + ClO– + H2O); CN– acts as a reducing agent like X–, not as an oxidising agent.
Teacher's Note: Halide ions are reducing; so is CN–.
Exam Note: Choose the false analogy.
Question 66. Alkali metals conduct current in liquid NH3 at –33 °C. Which is wrong about this fact?
(a) The conductance increases on lowering the temperature
(b) The solution conduct like metallic conductor
(c) The current is carried out by electrons and not by ions
(d) The solution conduct like electrolytic conductor
Solution. Answer: (d). Na + (x + y)NH3 → [Na(NH3)x]+ + [e(NH3)y]–; solvated electrons carry the current, so the solution behaves like a metallic conductor, not an electrolytic one.
Teacher's Note: Solvated electrons, not ions, conduct.
Exam Note: Name the charge carrier.
Question 67. Which represents incorrect reaction?
(a) Cu2O + 2HCl(dil.) → CuCl2 + Cu + H2O
(b) Cu2O + 2HCl(conc.) → 2HCuCl2 + 2H2O
(c) Cu2O + 2HI → CuI2 + Cu + H2O
(d) 2Cu+ →(H2O) Cu2+ + Cu+
Solution. Answer: (c). Cu2O + 2HI → 2CuI + H2O (CuI2 does not exist since I– reduces Cu2+), so (c) is incorrect.
Teacher's Note: Cu(II) iodide cannot exist: Cu2+ + I– gives CuI.
Exam Note: Write the correct HI reaction.
Question 68. Which of the following statements is incorrect?
(a) To remove impurities of SO2 and P4O10, a SiO2 lining in furnace is preferred
(b) To remove impurities of MgO and CaO, a SiO2 lining in furnace is preferred
(c) To remove impurities of metal oxide, a lining of SiO2 is preferred
(d) To remove impurities of SiO2, a lining of MgO or CaO is preferred
Solution. Answer: (a). To remove acidic oxide impurities (SO2, P4O10) a basic lining is preferred and vice versa, so (a) is incorrect.
Teacher's Note: Acidic impurity needs basic lining (flux logic).
Exam Note: Match impurity type with lining.
Question 69. Pd(NH3)2Cl2 does not conduct electricity in aqueous solution. Therefore:
(a) it is weak electrolyte
(b) Cl-atoms are covalently bonded in the coordination sphere
(c) the structure involves covalent bonding only
(d) all of the above
Solution. Answer: (d). All are correct: the complex [Pd(NH3)2Cl2] is a non-electrolyte with Cl– inside the coordination sphere (square planar).
Teacher's Note: No free ions, so no conductance.
Exam Note: Relate zero conductance to no free ions.
Question 70. In which hybridization is not d2sp3?
(a) [V(H2O)6]3+
(b) [Cr(CN)6]3–
(c) Cr(CO)6
(d) [MnBr4]2–
Solution. Answer: (d). In [MnBr4]2–, Mn2+ (3d5) is tetrahedral with sp3 hybridisation (four ligands); the others are octahedral d2sp3.
Teacher's Note: Four ligands means sp3 or dsp2, not d2sp3.
Exam Note: Use coordination number to find hybridisation.
Question 71. Which of the following does not involve innershell hybridisation?
(a) [CoF6]3–
(b) [Co(CN)6]3–
(c) [Fe(CN)6]4–
(d) [Ni(NH3)6]2+
Solution. Answer: (a). In [CoF6]3–, weak-field F– leaves Co3+ (3d6) unpaired and uses outer 4d orbitals: sp3d2. Co(CN)63– and Fe(CN)64– use d2sp3 (inner).
Teacher's Note: Weak-field ligand gives outer-orbital complex.
Exam Note: State spin state and orbitals used.
Question 72. Which of the following dn ions will have the smallest crystal field stabilization energy, if Δ is greater than the pairing energy?
(a) d6
(b) d8
(c) d9
(d) d10
Solution. Answer: (d). Total energy separation = Y – X (destabilisation minus stabilisation); a completely filled d10 set has zero CFSE whatever the value of Δ.
Teacher's Note: Filled t2g and eg cancel exactly.
Exam Note: Show CFSE = 0 for d10.
Question 73. One of the constituent of German silver is:
(a) Ag
(b) Cu
(c) Mg
(d) Al
Solution. Answer: (b). German silver is an alloy of Cu (with Zn and Ni); it contains no silver.
Teacher's Note: German silver: Cu, Zn, Ni; no Ag.
Exam Note: Name the three metals.
Question 74. The value of X in Mo(CO)x is:
(a) 2
(b) 4
(c) 5
(d) 6
Solution. Answer: (d). EAN of Mo = Z – (oxidation state) + 2 × number of ligands: 54 = 42 – 0 + 2x, giving x = 6 (each CO donates 2 electrons).
Teacher's Note: Solve 54 = 42 + 2x.
Exam Note: Show the EAN equation.
Question 75. Which of the following is incorrect?
(a) NO+ is more stable than NO
(b) CO+ is more stable than CO
(c) OF is less stable than F2
(d) CN is more stable than CN+
Solution. Answer: (c). OF is more stable than F2 since it has fewer antibonding electrons (bond order 1.5 versus 1), so (c) is incorrect.
Teacher's Note: Higher bond order means more stable.
Exam Note: Compare bond orders of OF and F2.
Question 76. Which of the following is incorrect about O2 and O22–?
(a) Bond order of O22– and O2 are 1 and 2 respectively
(b) O22– have longer bond than O2
(c) O22– has weaker bond than O2
(d) Both have same number of antibonding electrons
Solution. Answer: (d). Bonding and antibonding electrons are different in both: O22– has two more antibonding electrons, giving a lower bond order.
Teacher's Note: O22– has 8 antibonding electrons versus 6.
Exam Note: Count antibonding electrons.
Question 77. Pick up the incorrect statement:
(a) Bond length of N2– > bond length of N2
(b) Bond length of NO+ < bond length of NO
(c) Bond length of CN– < bond length of CN
(d) Bond length of CO < bond length of CO+
Solution. Answer: (d). Bond order of N2, N2–, NO+, NO, CN– and CN are 3, 2.5, 3, 2.5, 3, 2.5; higher bond order means shorter bond. CO+ has the shorter bond (experimentally CO 112.8 pm, CO+ about 111.5 pm), so (d) is incorrect. (The printed key quotes bond order 3.5 for CO+; bond order is actually 2.5, but the answer is unchanged.)
Teacher's Note: Higher bond order gives shorter bond; verify with data.
Exam Note: Compare bond orders.
Question 78. In which of the following, fact is incorrectly reported about N2, NO+, CN– and CO?
(a) Bond order for all these is three
(b) M.O. diagram for all these is same
(c) No. of bonding electrons and antibonding electrons in each is same
(d) σ* 2s-orbital in CO has higher energy than σ2px as well as π2py and π2pz orbitals whereas in rest all it has lower energy
Solution. Answer: (b). The MO diagram of CO is σ1s², σ*1s², σ2s², σ2pz², π2py², π2px², σ*2s². Because the 2s orbital of O (lower energy) and 2s of C (higher energy) mix, σ*2s rises above σ2p and π2p. So the MO diagrams are not all the same.
Teacher's Note: s–p mixing alters orbital order in heteronuclear CO.
Exam Note: State the MO order for CO.
Question 79. Which of the following salts containing either of the ion reported below are water soluble?
(a) NH4+
(b) ClO4–
(c) NO3–
(d) All of these
Solution. Answer: (d). Nitrates and perchlorates of all metals are water soluble; ammonium salts are water soluble.
Teacher's Note: Nitrates, perchlorates and NH4+ salts are always soluble.
Exam Note: Recall solubility rules.
Question 80. Which metal chloride is water soluble?
(a) NiCl2
(b) AgCl
(c) PbCl2
(d) HgCl2
Solution. Answer: (a). Chlorides of Ag, Pb and Hg(I) are water insoluble; NiCl2 is soluble in water. Answer (a) as printed.
Teacher's Note: Insoluble chlorides: AgCl, PbCl2, Hg2Cl2.
Exam Note: Recall insoluble chlorides.
Question 81. Which of the following chloride will not fume in air?
(a) BiCl3
(b) SbCl3
(c) PCl5
(d) CCl4
Solution. Answer: (d). All the others react with moisture to give fumes of HCl; CCl4 does not hydrolyse.
Teacher's Note: CCl4 lacks empty d-orbitals, so no hydrolysis.
Exam Note: Explain inertness of CCl4.
Question 82. In diborane the two H–B–H angles are nearly:
(a) 60°, 120°
(b) 95°, 120°
(c) 95°, 150°
(d) 120°, 180°
Solution. Answer: (b). In diborane, Ht–B–Ht = 120° (t = terminal) and Hb–B–Hb = 97° (b = bridge), nearly 95° and 120°.
Teacher's Note: Terminal 120°, bridging about 97°.
Exam Note: Label terminal and bridge H.
Question 83. Tear gas is:
(a) COCl2
(b) CCl3NO2
(c) N2O
(d) NO
Solution. Answer: (b). Chloropicrin, CCl3NO2, is used as tear gas.
Teacher's Note: Chloropicrin is the lachrymator; COCl2 is phosgene.
Exam Note: Name chloropicrin.
Question 84. Phosphorus glass in dark, the cold light emission is the phenomenon of:
(a) chemiluminescence
(b) phosphorescence
(c) fluorescence
(d) all of these
Solution. Answer: (a). The light is released during oxidation of P; evolution of light as a result of chemical change is chemiluminescence, not phosphorescence.
Teacher's Note: Light from a chemical reaction is chemiluminescence.
Exam Note: Distinguish it from phosphorescence.
Question 85. S–S bond is present in:
(a) S2O72–
(b) S3O9
(c) S2O42–
(d) S2O32–
Solution. Answer: (c). Dithionite S2O42– has an S–S bond (O2S–SO2 with charges), whereas S2O72– and S3O9 have only S–O–S links. Answer (c) as printed.
Teacher's Note: Draw the structure of dithionite to see S–S.
Exam Note: Draw each structure.
Question 86. Which of the following species possess pπ–dπ bonding?
(a) NO3–
(b) SO32–
(c) BO33–
(d) CO32–
Solution. Answer: (b). Only S has d-orbitals, so only SO32– can show pπ–dπ bonding.
Teacher's Note: N, B, C have no d-orbitals.
Exam Note: Check availability of d-orbitals.
Question 87. Among NO3–, AsO33–, CO32–, ClO3–, SO32– and BO33–, the non-planar species are:
(a) CO32–, SO32–, BO33–
(b) AsO33–, ClO3–, SO32–, BO33–
(c) NO3–, CO32–, BO33–
(d) SO32–, NO3–, BO33–
Solution. Answer: (b). AsO33–, ClO3– and SO32– are sp3-hybridised with one lone pair, hence pyramidal (non-planar). NO3–, CO32–, BO33– are planar. Answer (b) as printed.
Teacher's Note: One lone pair on central atom gives pyramid.
Exam Note: Find lone pairs on each central atom.
Question 88. Which one is not correct about the reaction of K2MnF6 with SbF5?
(a) It gives F2
(b) It involves acid-base reaction
(c) It gives acidity of MnF4
(d) It involves redox change
Solution. Answer: (c). 2K2MnF6 + 4SbF5 → 4KSbF6 + 2MnF4 (SbF5 strong Lewis acid; acid-base), then 2MnF4 → 2MnF3 + F2 (redox). MnF4 is unstable and does not show acidity, so (c) is not correct.
Teacher's Note: SbF5 abstracts F–; MnF4 decomposes to give F2.
Exam Note: Write both steps.
Question 89. Maximum number of lone pair of electrons on central atom exists in:
(a) Br3–
(b) XeF6
(c) XeF4
(d) ClO4–
Solution. Answer: (a). Br3– has three lone pairs on the central Br (equatorial positions of a trigonal bipyramid), more than XeF6 (1), XeF4 (2) and ClO4– (0).
Teacher's Note: Count lone pairs: (8 or 7+charge – bonds)/2.
Exam Note: Count pairs for each.
Question 90. The same number of lone pair of electrons but different hybridisation state exist in:
(a) XeO3, XeOF4, XeF6
(b) XeO3, XeO2F2, XeF4
(c) XeOF2, XeO2F2, XeF4
(d) XeF2, XeF4 and XeF6
Solution. Answer: (a). Each of XeO3, XeOF4 and XeF6 has one lone pair on Xe, with sp3, sp3d2 and sp3d3 hybridisation respectively.
Teacher's Note: Same lone pairs, different bond pairs gives different hybridisation.
Exam Note: State bond pairs and lone pairs of each.
Question 91. Radon is not formed as intermediate in one of the radioactive series called:
(a) Thorium series
(b) Neptunium series
(c) Uranium series
(d) Actinium series
Solution. Answer: (b). Thorium series gives thoron (220Rn), actinium series actinon (219Rn), uranium series radon (222Rn); the neptunium series does not form radon.
Teacher's Note: Natural series give Rn isotopes; Np series is artificial.
Exam Note: Name Rn isotope in each series.
Question 92. Which one is incorrect?
(a) SF4, CF4 and XeF4 show sp3d, sp3 and sp3d2-hybridisation respectively
(b) SF4 = 1 lone pair; CF4 = 0 lone pair; XeF4 = 2 lone pairs
(c) SF4 is T-shaped; CF4 is tetrahedral; XeF4 square planar
(d) Only in SF4 S–F bonds energy in different and is rest all it is same
Solution. Answer: (c). SF4 has a see-saw structure (one lone pair, sp3d), not T-shaped, so (c) is incorrect.
Teacher's Note: T-shape is ClF3; SF4 is see-saw.
Exam Note: Count 4 bond pairs plus 1 lone pair.
Question 93. Which one is not correct about Cr2O72–?
(a) It has 6Cr–O bonds of equal bond energy
(b) The 6Cr–O bond lengths are 161 pm and Cr–O–Cr bonds are 180 pm
(c) The Cr–O–Cr angle is 131°
(d) Its structure contains 6π bonds and 6σ bonds
Solution. Answer: (d). Dichromate is two CrO4 tetrahedra sharing one oxygen: terminal Cr–O 161 pm, bridge Cr–O 180 pm, Cr–O–Cr angle 131°. Resonance makes the six terminal Cr–O bonds equivalent. Statement (d) is not correct (it has eight σ bonds: six terminal and two bridging).
Teacher's Note: Count σ bonds: 6 terminal + 2 bridge = 8.
Exam Note: Draw the two-tetrahedra structure.
Question 94. The reaction of KI with KMnO4 in alkaline medium results in the formation of:
(a) KIO3 and MnO2
(b) I2 and MnO2
(c) KIO and MnO2
(d) KIO4 and K2MnO4
Solution. Answer: (a). I– → I5+ + 6e–; Mn7+ + 3e– → Mn4+. KI + 2KMnO4 + H2O → KIO3 + 2MnO2 + 2KOH.
Teacher's Note: In neutral/alkaline medium MnO4– goes to MnO2.
Exam Note: Balance electrons: 6e for I, 3e for Mn.
Question 95. Among the following pairs of ions, the lower oxidation state in aqueous solution is more stable than the other in:
(a) Tl+ and Tl3+
(b) Cu+ and Cu2+
(c) Cr2+ and Cr3+
(d) V2+ and VO2+
Solution. Answer: (a). Corrected: the printed key gives (d), but the lower state is more stable only for Tl+ (inert-pair effect: Tl(I) is more stable than Tl(III)). Cu+ disproportionates to Cu2+ + Cu, Cr2+ is less stable than Cr3+, and V2+ is a strong reductant, oxidised easily. Answer (a).
Teacher's Note: Inert pair effect stabilises lower state in heavy p-block.
Exam Note: Give reason for each rejected pair.
Question 96. The highest paramagnetic character is noticed in:
(a) MnSO4·4H2O
(b) CuSO4·5H2O
(c) FeSO4·6H2O
(d) NiSO4·6H2O
Solution. Answer: (a). Number of unpaired electrons in Mn2+, Cu2+, Fe2+ and Ni2+ are 5, 1, 4, 2 respectively; Mn2+ (d5) is most paramagnetic.
Teacher's Note: Paramagnetism rises with unpaired electrons.
Exam Note: List unpaired electrons.
Question 97. Which is correct about the reaction of KCN with CuSO4?
(a) It involves a redox reaction
(b) The reaction yields K3[Cu(CN)4] and pseudo halogen
(c) The reaction involves complex formation
(d) All of the above
Solution. Answer: (d). 2CuSO4 + 10KCN → 2K3[Cu(CN)4] + 2K2SO4 + C2N2 (cyanogen, a pseudohalogen): Cu(II) is reduced to Cu(I) (redox) and the complex forms.
Teacher's Note: Cu(II) is reduced by CN– to Cu(I).
Exam Note: Write the overall equation.
Question 98. Which does not dissolve in hot dilute HNO3?
(a) CuS
(b) PbS
(c) HgS
(d) CdS
Solution. Answer: (c). HgS is insoluble in hot dilute HNO3 (it needs aqua regia).
Teacher's Note: Very low Ksp of HgS.
Exam Note: Recall HgS dissolves only in aqua regia.
Question 99. The phenomenon in which white transparent crystal changes to white powder is called:
(a) Deliquescence
(b) Efflorescence
(c) Allotropy
(d) Sublimation
Solution. Answer: (b). This is due to loss of water of crystallisation (H2O molecules) to the atmosphere: efflorescence.
Teacher's Note: Deliquescence is the opposite (absorbs water).
Exam Note: Define efflorescence.
Question 100. Which gives red colour with KCNS?
(a) Cu2+
(b) Fe3+
(c) Al3+
(d) Zn2+
Solution. Answer: (b). Fe3+ + 3CNS– → Fe(CNS)3, blood red.
Teacher's Note: Standard test for Fe3+.
Exam Note: Name the red complex.
Question 101. Solder is an alloy of:
(a) 70% lead + 30% tin
(b) 33% lead + 67% tin
(c) 80% lead + 20% tin
(d) 90% Cu + 10% tin
Solution. Answer: (b). Solder contains 67% tin and 33% lead.
Teacher's Note: Solder is a Pb–Sn alloy rich in tin.
Exam Note: Quote the composition.
Question 102. Laughing gas is:
(a) COCl2
(b) CCl3NO2
(c) N2O
(d) NO2
Solution. Answer: (c). N2O is called laughing gas.
Teacher's Note: Others: COCl2 phosgene, CCl3NO2 tear gas.
Exam Note: Recall common names.
Question 103. Supercritical CO2 is used as:
(a) dry ice
(b) solvent for extraction of organic compound from natural sources
(c) fire fighting
(d) to provide inert medium for carrying out various reactions
Solution. Answer: (b). Supercritical CO2 (the state above its critical temperature Tc, a fluid of high solvent power) is used as a solvent for extracting organic compounds from natural sources. Answer (b) as printed.
Teacher's Note: Above Tc CO2 cannot be liquefied but dissolves organics.
Exam Note: Define supercritical fluid.
Question 104. The basic character of transition metal monoxide follows the order:
(a) VO > CrO > TiO > FeO
(b) CrO > VO > FeO > TiO
(c) TiO > VO > CrO > FeO
(d) TiO > FeO > VO > CrO
Solution. Answer: (c). Larger cation size means lower polarising power, i.e. more ionic character and a more basic compound. Ionic radii decrease along the period: Ti2+ > V2+ > Cr2+ > Fe2+, so basicity TiO > VO > CrO > FeO.
Teacher's Note: Larger cation means more ionic oxide, more basic.
Exam Note: Link size to ionic character.
Question 105. Litharge is chemically:
(a) PbO
(b) PbO2
(c) Pb3O4
(d) Pb(CH3COO)2
Solution. Answer: (a). Litharge (PbO) is an amphoteric oxide used in making flint glass, as a drier in paints and varnishes.
Teacher's Note: Litharge = PbO; red lead = Pb3O4.
Exam Note: Distinguish PbO and Pb3O4.
Question 106. An aqueous solution of CoCl2 on addition of excess of conc. HCl turns blue due to the formation of:
(a) [Co(H2O)4Cl2]
(b) [Co(H2O)2Cl4]2–
(c) [CoCl4]2–
(d) [Co(H2O)2Cl2]
Solution. Answer: (c). Corrected: the printed key gives (a), but the blue species is tetrahedral [CoCl4]2– (sp3, Co2+); [Co(H2O)6]2+ (pink) + 4Cl– → [CoCl4]2– + 6H2O. Answer (c).
Teacher's Note: Octahedral pink to tetrahedral blue on adding Cl–.
Exam Note: Name the pink and blue species.
Question 107. Number of P–O–P bonds in P4O10 and P4O6 are respectively:
(a) 6, 6
(b) 5, 5
(c) 5, 6
(d) 6, 5
Solution. Answer: (a). Both P4O6 and P4O10 have the same P4O6 cage with 6 P–O–P bonds.
Teacher's Note: P4O10 adds terminal P=O only.
Exam Note: Count bridging O atoms.
Question 108. Which of the following oxides of nitrogen is coloured?
(a) N2O
(b) NO
(c) N2O4
(d) NO2
Solution. Answer: (d). NO2 is brown (N2O4 is colourless).
Teacher's Note: Odd-electron NO2 is coloured; dimer is not.
Exam Note: Name colour of NO2.
Question 109. The correct order for the wavelength of absorption in visible region is:
(a) [Ni(NO2)6]4– < [Ni(NH3)6]2+ < [Ni(H2O)6]2+
(b) [Ni(NO2)6]4– < [Ni(H2O)6]2+ < [Ni(NH3)6]2+
(c) [Ni(H2O)6]2+ < [Ni(NH3)6]2+ < [Ni(NO2)6]4–
(d) [Ni(NH3)6]2+ < [Ni(H2O)6]2+ < [Ni(NO2)6]4–
Solution. Answer: (a). Corrected: the printed key gives (c), which is the order of ligand field strength (H2O < NH3 < NO2–). Stronger field means larger Δ, hence shorter wavelength (λ = hc/Δ), so wavelength order is NO2– < NH3 < H2O, option (a).
Teacher's Note: Larger Δ means shorter wavelength absorbed.
Exam Note: Do not confuse field strength order with wavelength order.
Question 110. Which of the following will give more H2 if equal masses of each of the following react with H2O?
(a) LiH
(b) NaH
(c) CaH2
(d) BaH2
Solution. Answer: (a). Moles = w/M, and M is smallest for LiH (8 g/mol), so equal mass of LiH has the most moles and gives most H2 (LiH + H2O → LiOH + H2).
Teacher's Note: Equal mass: smallest molar mass gives most moles.
Exam Note: Compare molar masses 8, 24, 42, 139.
Question 111. Zeolite, i.e., hydrated sodium aluminium silicate on treatment with hard water shows exchange of Na+ ion with:
(a) H+
(b) Ca2+
(c) SO42–
(d) OH–
Solution. Answer: (b). Na2Z + Ca2+ → CaZ + 2Na+; Na+ is replaced by Ca2+.
Teacher's Note: Permutit process softens hard water by cation exchange.
Exam Note: Write the exchange equation.
Question 112. Which of the halide is least stable and has a doubtful existence?
(a) CI4
(b) GeI4
(c) SnI4
(d) PbI4
Solution. Answer: (d). Pb4+ is a strong oxidant and I– is a strong reductant, so PbI4 would decompose to PbI2 + I2.
Teacher's Note: Oxidising Pb(IV) with reducing I– cannot coexist.
Exam Note: State why Pb(IV) iodide fails.
Question 113. On heating ammonium dichromate, the gas evolved is:
(a) O2
(b) NH3
(c) N2
(d) N2O
Solution. Answer: (c). (NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O.
Teacher's Note: Volcano demonstration; green Cr2O3 residue.
Exam Note: Give the balanced equation.
Question 114. One mole of calcium phosphide on reaction with excess water gives:
(a) one mole of phosphine
(b) two mole of phosphoric acid
(c) two mole of phosphine
(d) one mole of P2O5
Solution. Answer: (c). Ca3P2 + 6H2O → 3Ca(OH)2 + 2PH3.
Teacher's Note: Phosphine, not phosphoric acid, forms.
Exam Note: Balance the hydrolysis.
Question 115. There is no S–S bond in:
(a) S2O42–
(b) S2O62–
(c) S2O32–
(d) S2O72–
Solution. Answer: (d). S2O72– (pyrosulphate) has an S–O–S bridge and no S–S bond; the other three have S–S bonds (thiosulphate S–SO3, dithionite and dithionate).
Teacher's Note: Pyrosulphate is like dichromate: O-bridge.
Exam Note: Draw each structure.
Question 116. Which of the following is not pseudo halide?
(a) CNO–
(b) RCOO–
(c) OCN–
(d) NNN–1
Solution. Answer: (b). Several uninegative groups that show certain characteristics of halide ions are pseudohalides; RCOO– does not, while CNO–, OCN– and N3– do.
Teacher's Note: Pseudohalides resemble halide ions.
Exam Note: Name three pseudohalides.
Question 117. The correct decreasing acidic strength is:
(a) ClOH > BrOH > IOH
(b) BrOH > ClOH > IOH
(c) IOH > BrOH > ClOH
(d) ClOH > IOH > BrOH
Solution. Answer: (a). The greater the electronegativity of the central atom, the more acidic the hypohalous acid: HOCl > HOBr > HOI.
Teacher's Note: Electronegativity: Cl > Br > I.
Exam Note: State the trend.
Question 118. Chlorine acts as bleaching agent only in presence of:
(a) dry air
(b) moisture
(c) sunlight
(d) pure O2
Solution. Answer: (b). Cl2 + H2O → HCl + HOCl, HOCl → HCl + [O]; nascent oxygen does the bleaching.
Teacher's Note: Bleaching is oxidation by nascent oxygen.
Exam Note: Write both equations.
Question 119. In the dichromate dianion:
(a) 4 Cr–O bonds are equivalent
(b) 6 Cr–O bonds are equivalent
(c) all Cr–O bonds are equivalent
(d) all Cr–O bonds are non-equivalent
Solution. Answer: (b). Two tetrahedra share one oxygen (Cr–O–Cr angle 131°, bridge Cr–O 161/180 pm); by resonance the six terminal Cr–O bonds are equivalent.
Teacher's Note: Six terminal bonds equal; two bridge bonds differ.
Exam Note: Count terminal and bridge bonds.
Question 120. An aqueous solution of FeSO4·Al2(SO4)3 and chrome alum is heated with excess of Na2O2 and filtered. The materials obtained are:
(a) a colourless filtrate and a green residue
(b) a yellow filtrate and a brown residue
(c) a green filtrate and a brown residue
(d) none of the above
Solution. Answer: (b). Fe(OH)3 is formed as a brown residue; Cr(III) is oxidised to yellow chromate CrO42– and Al forms soluble aluminate, so the filtrate is yellow.
Teacher's Note: Na2O2 oxidises Cr3+ to chromate; Fe(OH)3 remains.
Exam Note: Identify residue and filtrate species.
Question 121. An aqueous solution contains Hg2+, Hg22+, Pb2+ and Cd2+. The addition of 6N HCl will precipitate:
(a) Hg2Cl2 only
(b) PbCl2 only
(c) PbCl2 and Hg2Cl2
(d) PbCl2 and HgCl2
Solution. Answer: (c). PbCl2 and Hg2Cl2 are insoluble; HgCl2 and CdCl2 stay in solution.
Teacher's Note: Group I (HCl) cations: Ag+, Pb2+, Hg22+.
Exam Note: Recall group I analysis.
Question 122. The geometries of Ni(CO)4 and Ni(PPh3)2Cl2 are:
(a) both square planar
(b) tetrahedral and square planar respectively
(c) both tetrahedral
(d) square planar and tetrahedral respectively
Solution. Answer: (c). Corrected: the printed key gives (b), but both are tetrahedral (sp3) (as in Q246): Ni(CO)4 has Ni(0), 3d10; Ni(PPh3)2Cl2 has Ni(II), 3d8 with two unpaired electrons, and is tetrahedral. Answer (c).
Teacher's Note: Key (b) as printed mis-lettered; tetrahedral both.
Exam Note: Hybridisation fixes geometry.
Question 123. Refining of Pb is made by:
(a) Bett's process
(b) Polling process
(c) Serpeck's process
(d) Cyanide process
Solution. Answer: (a). Lead is refined electrolytically by Betts process (electrolytic refining).
Teacher's Note: Polling is for Cu; Serpeck for Al ore; cyanide for Au/Ag.
Exam Note: Match refining processes to metals.
Question 124. Which of the following is known as spring reaction?
(a) Na2SO3 + Na2S + I2 → Na2S2O3 + 2NaI
(b) 2CaOCl2 →(CoCl2) 2CaCl2 + O2
(c) 2FeS + 3O2 → 2FeO + 2SO2
(d) 2CuFeS2 + O2 → Cu2S + 2FeS + SO2
Solution. Answer: (a). It is so called spring reaction (sulphite and sulphide with iodine give thiosulphate).
Teacher's Note: Spring reaction forms thiosulphate from sulphite and sulphur source.
Exam Note: Name the reaction product.
Question 125. Which of the following is not a component of German silver:
(a) Ag
(b) Cu
(c) Zn
(d) Ni
Solution. Answer: (a). German silver contains Cu, Zn and Ni; it has no silver.
Teacher's Note: Silver in its name only.
Exam Note: Name the alloy components.
Question 126. Which one does not contain Al:
(a) Feldspar
(b) Mica
(c) Fluorspar
(d) Cryolite
Solution. Answer: (c). Fluorspar is CaF2 and has no aluminium; feldspar, mica and cryolite (Na3AlF6) contain Al.
Teacher's Note: Cryolite = Na3AlF6.
Exam Note: Write formulae of the four minerals.
Question 127. Total no. of donor atoms in EDTA is:
(a) 2
(b) 4
(c) 6
(d) 8
Solution. Answer: (c). EDTA is a hexadentate ligand: two N atoms and four carboxylate O atoms, 6 donor atoms (it is a fact).
Teacher's Note: Hexadentate: 2 N + 4 O.
Exam Note: Identify donor atoms.
Question 128. Number of H-bonds present in complex formed by Ni2+ with DMG ligand is:
(a) 2
(b) 3
(c) 4
(d) 5
Solution. Answer: (a). In bis(dimethylglyoximato)nickel(II), two O–H···O hydrogen bonds link the two DMG ligands (red precipitate).
Teacher's Note: Two H-bond bridges close two six-membered rings.
Exam Note: Draw the Ni(DMG)2 structure.
Question 129. The number of unpaired electrons in [Co(NH3)6]3+, an inner orbital complex and in [CoCl6]3–, an outer orbital complex are respectively:
(a) 0, 4
(b) 4, 2
(c) 2, 4
(d) 4, 4
Solution. Answer: (a). Co3+ is 3d6. In [Co(NH3)6]3+ (strong field) the electrons pair: d2sp3, 0 unpaired. In [CoCl6]3– (weak field) four unpaired electrons remain: sp3d2.
Teacher's Note: Strong field pairs electrons; weak field does not.
Exam Note: Draw 3d6 box diagrams.
Question 130. The formula of Xenon hexafluoro platinate (V) is:
(a) Xe[Pt F4]
(b) Xe[Pt F5]
(c) Xe[Pt F6]
(d) Xe[Pt F3]
Solution. Answer: (c). Xe+ and [PtF6]– (Pt in +5 state): Xe[PtF6].
Teacher's Note: First noble gas compound (Bartlett).
Exam Note: Show O.N. of Pt = +5.
Question 131. The d-orbitals which is used by central metal during formation of MnO4–:
(a) dx²–y², dxy, dxz
(b) dx²–y², dyz, dxz
(c) dxy, dxz, dyz
(d) dz², dx²–y², dxy
Solution. Answer: (c). The t2g set (dxy, dyz, dzx) lies closer to 4s and 4p, giving d3s hybridisation (tetrahedral).
Teacher's Note: Tetrahedral hybridisation uses the t2 d-orbitals.
Exam Note: Name the hybridisation d3s.
Question 132. AgCl on fusion with Na2CO3 gives:
(a) Ag2O
(b) Ag2CO3
(c) Ag
(d) silver carbide
Solution. Answer: (c). Ag2CO3 decomposes on heating to Ag (Ag2CO3 → 2Ag + CO2 + ½O2), so metallic silver is obtained.
Teacher's Note: Ag compounds decompose to metal on heating.
Exam Note: Write the decomposition.
Question 133. CO although being neutral but acts as acid on reaction with solid caustic soda heated to 200 °C to give:
(a) Na2CO3
(b) HCOONa
(c) NaHCO3
(d) Na2O
Solution. Answer: (b). NaOH + CO →(200 °C) HCOONa (sodium formate).
Teacher's Note: CO is formally the anhydride of formic acid.
Exam Note: Write the equation.
Question 134. Products (A) and (B) in the reaction: KO2 + CO2 + H2O →(excess of CO2) [A] + [B]
(a) KHCO3, CO
(b) KHCO3, O2
(c) K2CO3, CO
(d) K2CO3, KOH
Solution. Answer: (b). 4KO2 + 4CO2 + 2H2O → 4KHCO3 + 3O2 (excess CO2 gives bicarbonate).
Teacher's Note: KO2 is used in breathing apparatus.
Exam Note: Balance with excess CO2.
Question 135. Dissolution of sulphur in hot and concentrated H2SO4 gives:
(a) SO2
(b) SO3
(c) H2S2O6
(d) H2S2O3
Solution. Answer: (a). S + 2H2SO4 → 3SO2 + 2H2O.
Teacher's Note: Hot conc. H2SO4 oxidises non-metals.
Exam Note: Write the balanced equation.
Question 136. A gas which exists in three allotropic forms (i.e., α, β and γ) is:
(a) SO2
(b) SO3
(c) CO2
(d) NH3
Solution. Answer: (b). SO3 exists in α, β and γ forms (the cyclic trimer (SO3)3 is the γ form); it is a fact.
Teacher's Note: Only SO3 polymerises to solid forms.
Exam Note: Name the three forms of SO3.
Question 137. Which one is called mixed anhydride of nitrogen:
(a) N2O
(b) NO2
(c) N2O3
(d) N2O5
Solution. Answer: (b). 2NO2 + H2O → HNO3 + HNO2; NO2 gives both acids, so it is the mixed anhydride.
Teacher's Note: Mixed anhydride gives two different acids.
Exam Note: Write the hydrolysis.
Question 138. Which one is not a constituent of tincture of iodine:
(a) I2
(b) KI
(c) Rectified sprit
(d) CCl4
Solution. Answer: (d). Tincture of iodine contains I2 + KI dissolved in spirit (alcohol); CCl4 is not present.
Teacher's Note: Tincture is an alcoholic solution.
Exam Note: Name the three constituents.
Question 139. Pure boron can be obtained by:
(a) Heating B2O3 with H2
(b) Heating KBF4 with Na or K
(c) Heating BBr3 with Na or K
(d) Heating B2O3 with Na or K
Solution. Answer: (d). 2B2O3 + 6Na → 3Na2O2 + 4B (as printed); heating B2O3 with Na or K reduces it to boron.
Teacher's Note: Reduce oxide with a strong metal.
Exam Note: Balance with Na2O as product.
Question 140. Which of the following is not known:
(a) IPO4
(b) (CH3COO)3I
(c) IF7
(d) ICl7
Solution. Answer: (d). Iodine shows the +7 state with O and F, but the large size of I cannot accommodate seven Cl atoms, so ICl7 is not known (printed text: large size of Cl resists being attached).
Teacher's Note: Seven Cl atoms around I is sterically impossible.
Exam Note: Compare IF7 and ICl7.
Question 141. Which of the following reaction represents plumbosolvency:
(a) 2Pb + O2 + 2H2O → 2Pb(OH)2
(b) 2Pb + O2 → 2PbO
(c) Pb + 2HCl → PbCl2 + H2
(d) none of the above
Solution. Answer: (a). Lead dissolves in water in the presence of air (O2 and moisture) forming soluble Pb(OH)2: this is plumbosolvency.
Teacher's Note: Pb(OH)2 makes water poisonous.
Exam Note: Define plumbosolvency.
Question 142. Both P2O5 and PCl5 on passing through excess of water gives:
(a) H3PO3
(b) H3PO2
(c) H3PO4
(d) H4P2O7
Solution. Answer: (c). PCl5 + 4H2O → H3PO4 + 5HCl; P2O5 + 3H2O → 2H3PO4.
Teacher's Note: Excess water gives ortho-phosphoric acid.
Exam Note: Write both hydrolyses.
Question 143. NH3 can be dried by:
(a) CaO
(b) H2SO4
(c) P4O10
(d) CaCl2
Solution. Answer: (a). Basic NH3 is dried with CaO; the others (H2SO4, P4O10 acidic; CaCl2 forms CaCl2·8NH3) react with it.
Teacher's Note: Dry a basic gas with a basic desiccant.
Exam Note: Match gas type with drying agent.
Question 144. Which of the following is correct for N2O5:
(a) N2O5 in solid state has nitronium ion (NO2+)
(b) N2O5 in gaseous state N–O–N bond is linear
(c) N2O5 in solid state has nitrate ion NO3–
(d) all of above
Solution. Answer: (d). In the solid state N2O5 has the ionic structure NO2+NO3–, so all statements given are correct.
Teacher's Note: Solid N2O5 = nitronium nitrate.
Exam Note: Write the ionic formula.
Question 145. Select the incorrect statement:
(a) Li can be obtained by the electrolysis of LiCl solution in pyridine
(b) Oxides of metals placed below H in electrochemical series are thermally unstable
(c) Cucumber contains vanadium metal
(d) Thomas slag is CaSO4
Solution. Answer: (d). Thomas slag is Ca3(PO4)2 (a phosphatic fertiliser by-product of steel making), not CaSO4.
Teacher's Note: Thomas slag is basic slag, a phosphate.
Exam Note: Give formula of Thomas slag.
Question 146. Which of the following is incorrect?
(a) Metals of 7, 8 and 9 groups do not form hydride
(b) Water gas shift reaction is: CO + H2O →(673 K, FeO/CoO) CO2 + H2
(c) Glauber salt is deliquescent
(d) Epsom salt is efflorescent
Solution. Answer: (c). Na2SO4·10H2O (Glauber salt) is efflorescent, i.e. loses water on exposure to air, not deliquescent.
Teacher's Note: Efflorescent loses water; deliquescent absorbs it.
Exam Note: Define both terms.
Question 147. Free flow salt contains small amount of ......... with NaCl.
(a) Ca3(PO4)2
(b) Na3PO4
(c) Mg3PO4
(d) Li3PO4
Solution. Answer: (a). It is a fact: free-flowing table salt contains a small amount of Ca3(PO4)2, which absorbs moisture and prevents caking. Answer (a) as printed.
Teacher's Note: Anti-caking agent absorbs moisture.
Exam Note: Name the anti-caking agent.
Question 148. In fire crackers, which of the following is used to develop green fire:
(a) KNO3
(b) Ba(NO3)2
(c) Ni(NO3)2
(d) Al(NO3)3
Solution. Answer: (b). Ba imparts a green colour to the flame, so Ba(NO3)2 is used.
Teacher's Note: Flame colours: Ba green, Sr red.
Exam Note: Recall Ba and Sr flame colours.
Question 149. Which is not correct for SF4:
(a) It is a gas
(b) It acts as Lewis acid
(c) It acts as Lewis base
(d) It neither acts as Lewis acid or Lewis base
Solution. Answer: (d). SF4(g) + BF3 → [SF3]+[BF4]– (Lewis base) and SF4 + 2F– → [SF6]2– (Lewis acid); so (d) is incorrect.
Teacher's Note: SF4 is amphoteric in the Lewis sense.
Exam Note: Write both reactions.
Question 150. Pure chlorine can be obtained by:
(a) KClO3 + MnO2
(b) PtCl4 or AuCl3
(c) HCl + O2
(d) KClO3 + KX in alk. medium
Solution. Answer: (b). PtCl4 →(374 °C) PtCl2 + Cl2, PtCl2 →(582 °C) Pt + Cl2; AuCl3 →(175 °C) AuCl + Cl2 →(185 °C) Au + Cl2; thermal decomposition gives pure Cl2.
Teacher's Note: Noble-metal chlorides decompose cleanly.
Exam Note: Give decomposition temperatures.
Question 151. Select the incorrect statement:
(a) Liquid He is cryogenic liquid
(b) Fluorine is only halogen which reacts with noble gases
(c) Xe has + 6 Ox. no. in perxenates
(d) He + O2 mixture is used as ethane pahent
Solution. Answer: (c). Oxidation number of Xe in perxenates [XeO6]4– is +8, not +6.
Teacher's Note: Perxenate: Xe(VIII).
Exam Note: Compute O.N. of Xe.
Question 152. Copper can be extracted from:
(a) Kupfernickel
(b) Dolomite
(c) Cinnabar
(d) Malachite
Solution. Answer: (d). Malachite is CuCO3·Cu(OH)2, an ore of copper.
Teacher's Note: Kupfernickel is NiAs; cinnabar is HgS.
Exam Note: Match ores with metals.
Question 153. In the manufacture of iron from haematite, the function of lime stone is as:
(a) a reducing agent
(b) slag
(c) flux
(d) gangue
Solution. Answer: (c). CaCO3 (flux) + SiO2 (gangue) → CaSiO3 (slag) + CO2.
Teacher's Note: Basic flux removes acidic gangue.
Exam Note: Write the slag reaction.
Question 154. In the metallurgy of iron, when limestone is added to the blast furnace, the calcium ion ends up in:
(a) slag
(b) gangue
(c) metallic calcium
(d) calcium carbonate
Solution. Answer: (a). CaCO3 + SiO2 → CaSiO3 + CO2; calcium ends up in the slag as calcium silicate.
Teacher's Note: Ca ends as CaSiO3.
Exam Note: Name the slag.
Question 155. In the aluminothermite process, aluminium acts as:
(a) an oxidizing agent
(b) a flux
(c) a reducing agent
(d) a solder
Solution. Answer: (c). Al acts as reducing agent: 2Al + Cr2O3 → Al2O3 + 2Cr.
Teacher's Note: Al is oxidised to Al2O3.
Exam Note: Write the thermite equation.
Question 156. Hydrogen gas will not reduce:
(a) heated cupric oxide
(b) heated ferric oxide
(c) heated stannic oxide
(d) heated aluminium oxide
Solution. Answer: (d). Al is more electropositive than Fe and Sn, so Al2O3 cannot be reduced by H2; H2 reduces CuO, and reduces Fe3+ to Fe2+ and Sn4+ to Sn2+.
Teacher's Note: Reduction by H2 works only for less electropositive metals.
Exam Note: Compare electropositivity of Al with Fe, Sn.
Question 157. The major role of fluorspar (CaF2) which is added in small quantities in the electrolytic reduction of alumina dissolved in fused cryolite (Na3AlF6) is in:
(a) as a catalyst
(b) to make the fused mixture very conducting
(c) to lower the temperature of the melt
(d) to decrease the rate of oxidation of carbon at the anode
Solution. Answer: (b). CaF2 is used to lower the fusion temperature of the fused mixture (key explanation) and to improve its conductivity. Answer (b) as printed.
Teacher's Note: CaF2 acts as a flux in Hall–Héroult cell.
Exam Note: State the purpose of fluorspar.
Question 158. Among the following statements, the incorrect one is:
(a) Calamine and siderite are carbonates
(b) Argentite and cuprite are oxides
(c) Zinc blende and pyrites are sulphides
(d) malachite and azurite are ores of copper
Solution. Answer: (b). Argentite (Ag2S) and cuprite (Cu2O): argentite is a sulphide, not an oxide, so (b) is incorrect.
Teacher's Note: Argentite is Ag2S.
Exam Note: Give formulae of ores.
Question 159. In the commercial electrochemical process for aluminium extraction, the electrolyte used is:
(a) Al(OH)3 in NaOH solution
(b) an aqueous solution of Al2(SO4)3
(c) a molten mixture of Al2O3 and Na3AlF6
(d) a molten mixture of Al2O3 and Al(OH)3
Solution. Answer: (c). Na3AlF6 (cryolite) lowers the melting point of Al2O3 and increases the conductivity.
Teacher's Note: Hall–Héroult process.
Exam Note: Role of cryolite.
Question 160. The element with the highest first ionization potential is:
(a) Boron
(b) Carbon
(c) Nitrogen
(d) Oxygen
Solution. Answer: (c). Nitrogen has the half-filled 2p3 configuration, giving it the highest first ionisation energy of these four.
Teacher's Note: Half-filled stability: N > O.
Exam Note: Mention 2p3.
Question 161. Which one of the following is the smallest in size?
(a) N3–
(b) O2–
(c) F–
(d) Na+
Solution. Answer: (d). These are isoelectronic (10 e–); size decreases as effective nuclear charge increases, ionic size ∝ 1/Zeff; Na+ (Z = 11) is smallest.
Teacher's Note: Isoelectronic: higher Z means smaller ion.
Exam Note: Compare Z: 7, 8, 9, 11.
Question 162. Which of the following is the strongest base:
(a) AsH3
(b) NH3
(c) PH3
(d) SbH3
Solution. Answer: (b). In NH3 the lone pair on N is concentrated in a small 2p-based orbital (N has no d-orbitals), so it donates most easily; basic character of hydrides decreases down the group.
Teacher's Note: Smaller atom means more concentrated lone pair.
Exam Note: Order: NH3 > PH3 > AsH3 > SbH3.
Question 163. The statement that is not correct for the periodic classification of elements is:
(a) The properties of elements are the periodic functions of their atomic numbers
(b) Non-metallic elements are lesser in number than metallic elements
(c) The first ionization energies of elements along a period do not vary in a regular manner with increase in atomic number
(d) For transition elements the d-sub shells are filled with electrons monotonically with increase in atomic number
Solution. Answer: (d). Among transition elements electrons are not filled monotonically in the d-subshell with increasing atomic number (Cr and Cu are exceptions), so (d) is not correct.
Teacher's Note: Cr (3d54s1) and Cu (3d104s1) break the pattern.
Exam Note: Give the Cr and Cu exceptions.
Question 164. Which has most stable + 2 oxidation state:
(a) Sn
(b) Pb
(c) Fe
(d) Ag
Solution. Answer: (b). Heavy p-block elements show the inert-pair effect, so Pb2+ (5d106s2) is much more stable than Fe2+ (→ 3d5), Sn2+ (→ 4d105s0) or Ag2+ (not easily obtained).
Teacher's Note: Inert pair effect increases down group 14.
Exam Note: Compare Pb2+ with Sn2+.
Question 165. The correct order of ionic radii of Y3+, La3+, Eu3+ and Lu3+ is:
(a) Y3+ < Lu3+ < Eu3+ < La3+
(b) Lu3+ < Eu3+ < La3+ < Y3+
(c) La3+ < Eu3+ < Lu3+ < Y3+
(d) Y3+ < La3+ < Eu3+ < Lu3+
Solution. Answer: (a). Due to lanthanoid contraction the radii are Y3+ < Lu3+ < Eu3+ < La3+. Y belongs to the 5th period and Lu to the 6th, so Y3+ < Lu3+; the contraction is due to the poor shielding of 4f electrons.
Teacher's Note: Lanthanide contraction: radius falls La to Lu.
Exam Note: Explain poor 4f shielding.
Question 166. Complete combustion of H2S in air results in production of:
(a) S and H2O
(b) SO2, H2
(c) H2SO4
(d) H2O, SO2
Solution. Answer: (d). 2H2S + 3O2 → 2SO2 + 2H2O.
Teacher's Note: Complete combustion gives SO2, incomplete gives S.
Exam Note: Balance the equation.
Question 167. N2O is an:
(a) acidic
(b) basic
(c) amphoteric
(d) neutral oxide
Solution. Answer: (d). N2O and NO are neutral, while N2O3, N2O4, N2O5 are acidic.
Teacher's Note: Neutral oxides: N2O, NO, CO.
Exam Note: Name neutral oxides of nitrogen.
Question 168. The gas least soluble in water is:
(a) HCl
(b) N2
(c) NH3
(d) CO2
Solution. Answer: (b). N2 is almost inert due to its high bond dissociation energy, hence sparingly soluble in water.
Teacher's Note: HCl and NH3 react or H-bond with water.
Exam Note: State why N2 is insoluble.
Question 169. The formula of Indian salt petre is:
(a) KNO3
(b) NaNO3
(c) NaCl
(d) NH4NO3
Solution. Answer: (a). KNO3 is called Indian salt petre; NaNO3 is chile salt petre.
Teacher's Note: Chile saltpetre is NaNO3.
Exam Note: Distinguish Indian and Chile saltpetre.
Question 170. The substance having the lowest boiling point is:
(a) NH3
(b) H2S
(c) H2O
(d) none of these
Solution. Answer: (b). H2S does not form hydrogen bonding, while in water and ammonia intermolecular hydrogen bonding exists, so H2S has the lowest boiling point.
Teacher's Note: H-bonding raises boiling point.
Exam Note: Contrast H-bonding in H2S, NH3, H2O.
Question 171. Gypsum is:
(a) MgSO4·7H2O
(b) CuSO4·5H2O
(c) CaSO4·½H2O
(d) CaSO4·2H2O
Solution. Answer: (d). CaSO4·2H2O is called gypsum (the ½H2O form is plaster of Paris).
Teacher's Note: Gypsum on heating gives plaster of Paris.
Exam Note: Distinguish gypsum and plaster of Paris.
Question 172. Among the following the coloured compound is:
(a) CuCl
(b) K3[Cu(CN)4]
(c) CuF2
(d) [Cu(CH3CN)4]BF4
Solution. Answer: (c). CuF2 contains Cu2+ (3d9) with one unpaired electron; the other complexes contain Cu+ (3d10), which has no unpaired electron and is colourless.
Teacher's Note: Colour needs unpaired d electron.
Exam Note: Count unpaired electrons.
Question 173. Hydrogen is evolved by the action of cold dil. HNO3 on:
(a) Fe
(b) Cu
(c) Mn
(d) Al
Solution. Answer: (c). Mn + 2HNO3(dil.) → Mn(NO3)2 + H2.
Teacher's Note: Only Mg and Mn give H2 with very dilute HNO3.
Exam Note: Name the two metals giving H2.
Question 174. The temporary hardness of water due to calcium bicarbonate can be removed by adding:
(a) CaCO3
(b) Ca(OH)2
(c) CaCl2
(d) HCl
Solution. Answer: (b). Ca(OH)2 + Ca(HCO3)2 → 2CaCO3↓ + 2H2O (Clark's method).
Teacher's Note: Clark's process uses slaked lime.
Exam Note: Write Clark's reaction.
Question 175. The reddish-brown coloured gas formed when nitric oxide is oxidised by air is:
(a) N2O5
(b) N2O4
(c) NO2
(d) N2O3
Solution. Answer: (c). 2NO + O2 → 2NO2 (reddish brown).
Teacher's Note: Brown ring/fumes: NO2.
Exam Note: Write the reaction.
Question 176. Which of the following is most stable to heat:
(a) HCl
(b) HOCl
(c) HBr
(d) HI
Solution. Answer: (a). It is a fact: HCl has the strongest H–X bond and is the most stable to heat.
Teacher's Note: Bond strength falls H–Cl > H–Br > H–I.
Exam Note: Compare H–X bond energies.
Question 177. A gas 'X' is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrite gives a white precipitate. The saturated aqueous solution also dissolves magnesium ribbon with evolution of a colourless gas 'Y'. Identify 'X' and 'Y':
(a) X = CO2, Y = Cl2
(b) X = Cl2, Y = CO2
(c) X = Cl2, Y = H2
(d) X = H2, Y = Cl2
Solution. Answer: (c). Cl2 + H2O → HCl + HOCl (X = Cl2); HCl + AgNO2 → AgCl↓ (white) + HNO2; 2HCl + Mg → MgCl2 + H2 (Y = H2).
Teacher's Note: Chlorine water contains HCl, which gives AgCl and H2.
Exam Note: Identify X from AgCl and Y from Mg.
Question 178. Calcium is obtained by:
(a) electrolysis of molten CaCl2
(b) electrolysis of a solution of CaCl2 in water
(c) reduction of CaCl2 with carbon
(d) roasting of limestone
Solution. Answer: (a). CaCl2 (fused) → Ca2+ + 2Cl–; cathode: Ca2+ + 2e– → Ca; anode: 2Cl– → Cl2 + 2e–.
Teacher's Note: Reactive metals need fused-salt electrolysis.
Exam Note: Give electrode reactions.
Question 179. Which of the following dissolve in hot concentrated NaOH solution.
(a) Fe
(b) Zn
(c) Cu
(d) Ag
Solution. Answer: (b). Zn + 2NaOH → Na2ZnO2 + H2; Zn is amphoteric.
Teacher's Note: Amphoteric metals: Zn, Al, Sn, Pb.
Exam Note: Write the equation.
Question 180. "Lead pencil" contains:
(a) Pb
(b) FeS
(c) Graphite
(d) PbS
Solution. Answer: (c). Graphite is used in lead pencil (no lead is present).
Teacher's Note: Pencil lead is graphite mixed with clay.
Exam Note: State the misnomer.
Question 181. Which of the following are coloured?
(a) NO
(b) N2O
(c) CO
(d) None of these
Solution. Answer: (d). None of these is coloured (NO, N2O and CO are colourless gases).
Teacher's Note: Brown NO2 is the coloured oxide.
Exam Note: Contrast with NO2.
Question 182. HCl is added to the following oxides which one would give H2O2?
(a) MnO2
(b) PbO2
(c) BaO
(d) None of these
Solution. Answer: (d). None of these is a peroxide: MnO2 and PbO2 are dioxides, and BaO is a normal oxide; only a peroxide such as BaO2 gives H2O2 with dilute acid.
Teacher's Note: BaO is not BaO2.
Exam Note: Distinguish oxide, dioxide and peroxide.
Question 183. An aqueous solution of a substance gives a white precipitate on treatment with dilute hydrochloric acid, which dissolves on heating. When hydrogen sulphide is passed through the hot acidic solution, a black precipitate is formed. The substance is a:
(a) Hg22+ salt
(b) Cr2+ salt
(c) Ag+ salt
(d) Pb2+ salt
Solution. Answer: (d). Pb2+ + 2HCl(dil.) → PbCl2↓ (white, dissolves on heating); in the hot acid solution PbCl2 + H2S → PbS↓ (black) + 2HCl. Hence the substance is a Pb2+ salt.
Teacher's Note: PbCl2 is soluble in hot water.
Exam Note: Give both observations.
Question 184. White phosphorus reacts with caustic soda. The products are PH3 and NaH2PO2. This reaction is an example of:
(a) Oxidation
(b) Reduction
(c) Oxidation and reduction
(d) Neutralization
Solution. Answer: (c). P4 + 3NaOH + 3H2O → 3NaH2PO2 + PH3: P is both oxidised (0 to +1) and reduced (0 to –3), a disproportionation (auto redox).
Teacher's Note: Same element oxidised and reduced: disproportionation.
Exam Note: Show O.N. changes of P.
Question 185. In nitroprusside ion the iron and NO exist as FeII and NO+ rather than FeIII and NO. These forms can be differentiated by:
(a) estimating the concentration of iron
(b) measuring the concentration of CN
(c) measuring the solid state magnetic moment
(d) thermally decomposing the compound
Solution. Answer: (c). Magnetic moment relates to the number of unpaired electrons n: μ = √(n(n+2)) BM. Fe2+ (3d6) with NO+ (n = 0) differs from Fe3+ (3d5) with NO (n = 1) in unpaired electrons, so the forms can be told apart by the solid-state magnetic moment.
Teacher's Note: Different unpaired electron counts give different μ.
Exam Note: Compare FeII/NO+ and FeIII/NO.
Question 186. A solution of sodium metal in liquid ammonia is strongly reducing due to the presence of:
(a) Sodium atoms
(b) Sodium hydride
(c) Sodium amide
(d) Solvated electrons
Solution. Answer: (d). Na + xNH3 → Na+ + [e(NH3)x]–; the solvated electron (blue colour) is the reducing species.
Teacher's Note: Solvated electrons impart blue colour and reducing power.
Exam Note: Name the blue species.
Question 187. HBr and HI reduce sulphuric acid, HCl can reduce KMnO4 and HF can reduce:
(a) H2SO4
(b) KMnO4
(c) K2Cr2O7
(d) None of these
Solution. Answer: (d). None of these: HF is a weak acid and F– is the most difficult halide ion to oxidise, so HF cannot reduce any of them.
Teacher's Note: HF has no reducing power.
Exam Note: Compare reducing power HI > HBr > HCl > HF.
Question 188. Which of the following statements about anhydrous aluminium chloride is correct?
(a) It exists as AlCl3 molecules
(b) It is not easily hydrolysed
(c) It sublimes at 100 °C under vacuum
(d) It is a strong Lewis base
Solution. Answer: (c). Anhydrous AlCl3 exists as the dimer Al2Cl6, is easily hydrolysed, is a strong Lewis acid and sublimes at 100 °C under vacuum.
Teacher's Note: AlCl3 is dimeric and a Lewis acid.
Exam Note: Correct the other three statements.
Question 189. Sodium thiosulphate is used in photography because of its:
(a) Reducing behaviour
(b) Oxidising behaviour
(c) Complex forming behaviour
(d) Reaction with light
Solution. Answer: (c). Na2S2O3 dissolves unexposed AgBr by forming the soluble complex Na3[Ag(S2O3)2] ("hypo" as fixer).
Teacher's Note: Fixing removes unreacted silver halide as a complex.
Exam Note: Write the complex formed.
Question 190. Moderate electrical conductivity is shown by:
(a) Silica
(b) Graphite
(c) Diamond
(d) Carborundum
Solution. Answer: (b). Graphite has mobile free electrons (delocalised π electrons), so it conducts moderately.
Teacher's Note: Diamond, silica and carborundum are insulators.
Exam Note: Explain delocalised electrons in graphite.
Question 191. The ion that can not be precipitated by both HCl and H2S:
(a) Pb2+
(b) Cu+
(c) Ag+
(d) Sn2+
Solution. Answer: (d). Pb2+, Cu+ and Ag+ are precipitated by HCl (as chlorides) and also by H2S; Sn2+ is not precipitated by HCl (SnCl2 is soluble), so it cannot be precipitated by both.
Teacher's Note: Group I ions form chlorides; group II ions need H2S in acid.
Exam Note: Compare Pb, Cu(I), Ag, Sn(II).
Question 192. Heavy water is:
(a) H2O18
(b) Water obtained by repeated distillation
(c) D2O
(d) Water at 4 °C
Solution. Answer: (c). D2O is heavy water (D = deuterium, 2H).
Teacher's Note: Heavy water is used as moderator in reactors.
Exam Note: State the use as moderator.
Question 193. Chlorine is used as a bleaching agent only in presence of:
(a) Dry air
(b) Moisture
(c) Sunlight
(d) Pure oxygen
Solution. Answer: (b). Chlorine reacts with moisture to give nascent oxygen which bleaches coloured substances: Cl2 + H2O → HCl + HOCl; HOCl → HCl + [O].
Teacher's Note: Dry Cl2 does not bleach.
Exam Note: Write the nascent oxygen steps.
Question 194. Nitrogen dioxide cannot be obtained by heating:
(a) KNO3
(b) Pb(NO3)2
(c) Cu(NO3)2
(d) AgNO3
Solution. Answer: (a). 2KNO3 → 2KNO2 + O2; alkali metal nitrates give nitrite and oxygen, not NO2.
Teacher's Note: Alkali nitrates give nitrites; heavy-metal nitrates give NO2.
Exam Note: Contrast with Pb(NO3)2.
Question 195. A gas that cannot be collected over water is:
(a) N2
(b) O2
(c) SO2
(d) PH3
Solution. Answer: (c). SO2 is very soluble in water (it reacts to form sulphurous acid), so it cannot be collected over water.
Teacher's Note: Highly soluble gases are collected by air displacement.
Exam Note: Name the method for SO2.
Question 196. Molecular formula of Glauber's salt is:
(a) MgSO4·7H2O
(b) CuSO4·5H2O
(c) FeSO4·7H2O
(d) Na2SO4·10H2O
Solution. Answer: (d). Glauber's salt is Na2SO4·10H2O (it is a fact).
Teacher's Note: Epsom salt is MgSO4·7H2O.
Exam Note: Match salt names with formulae.
Question 197. The oxide that gives H2O2 on treatment with a dilute acid is:
(a) PbO2
(b) Na2O2
(c) MnO2
(d) TiO2
Solution. Answer: (b). Na2O2 + H2SO4 → Na2SO4 + H2O2.
Teacher's Note: Only a peroxide gives H2O2 with dilute acid.
Exam Note: Write the equation.
Question 198. The compound which gives off oxygen on moderate heating:
(a) Cupric oxide
(b) Mercuric oxide
(c) Zinc oxide
(d) Aluminium oxide
Solution. Answer: (b). 2HgO →(heat) 2Hg + O2; oxides of noble/less reactive metals decompose on moderate heating.
Teacher's Note: HgO is thermally unstable.
Exam Note: Write the decomposition.
Question 199. The bonds present in N2O5 are:
(a) Only ionic
(b) Covalent and coordinate
(c) Only covalent
(d) Covalent and ionic
Solution. Answer: (b). N2O5 (O2N–O–NO2 in the gas) contains covalent and coordinate bonds (N→O).
Teacher's Note: Gaseous N2O5 is molecular.
Exam Note: Draw the Lewis structure.
Question 200. The compound whose 0.1 M solution is basic is:
(a) Ammonium acetate
(b) Ammonium chloride
(c) Na2CO3
(d) NaCl
Solution. Answer: (c). Na2CO3 is a salt of a strong base and a weak acid; its hydrolysis (CO32– + H2O ⇌ HCO3– + OH–) makes the solution basic.
Teacher's Note: Strong base plus weak acid gives basic salt.
Exam Note: Write the hydrolysis ionic equation.
Question 201. Which of the following oxides of nitrogen is a coloured gas?
(a) N2O
(b) NO
(c) N2O5
(d) NO2
Solution. Answer: (d). NO2 is a brown coloured gas.
Teacher's Note: NO2 has an odd electron.
Exam Note: State the colour.
Question 202. The aqueous solution of FeSO4·Al2(SO4)3 and chrome alum is heated with excess of Na2O2 and filtered. The material obtained are:
(a) A colourless filtrate and green residue
(b) A yellow filtrate and green residue
(c) A yellow filtrate and brown residue
(d) A green filtrate and brown residue
Solution. Answer: (c). The filtrate is yellow due to CrO42–, and the residue is brown due to Fe(OH)3 (aluminate stays in solution).
Teacher's Note: Peroxide oxidises Cr(III) to chromate in alkali.
Exam Note: Name filtrate and residue species.
Question 203. Amongst the trihalides of nitrogen which one is least basic?
(a) NF3
(b) NCl3
(c) NBr3
(d) NI3
Solution. Answer: (a). NF3 is least basic because of the high electronegativity of fluorine, which gives rise to a positive charge on the N atom and withdraws the lone pair.
Teacher's Note: Electronegative F pulls electron density from N.
Exam Note: Explain by electronegativity.
Question 204. Bromine can be liberated from potassium bromide solution by the action of:
(a) Iodine solution
(b) Chlorine water
(c) Sodium chloride
(d) Potassium iodide
Solution. Answer: (b). The reduction potential of Cl2 is more than that of Br2, therefore Cl2 replaces Br– from solution.
Teacher's Note: Halogen displacement follows oxidising power.
Exam Note: Write Cl2 + 2KBr.
Question 205. The only cations present in a slightly acidic solution are Fe3+, Zn2+, Cu2+. The reagent when added in excess to this solution would identify and separate Fe3+ in one step:
(a) 2M HCl
(b) 6M NH3
(c) 6M NaOH
(d) H2S
Solution. Answer: (b). Fe3+ is precipitated in its hydroxide form (Fe3+ + 3NH4OH → Fe(OH)3 + 3NH4+) while Cu2+ and Zn2+ form soluble ammine complexes with excess NH3.
Teacher's Note: Excess NH3 dissolves Cu(II) and Zn(II) as ammines.
Exam Note: Name the complexes formed.
Question 206. An aqueous solution contains Hg2+, Hg22+, Pb2+ and Cd2+. The addition of HCl (6N) will precipitate:
(a) Hg2Cl2 only
(b) PbCl2 only
(c) PbCl2 and Hg2Cl2
(d) PbCl2 and HgCl2
Solution. Answer: (c). Both Pb2+ and Hg22+ have lower Ksp chlorides than Cd2+ and Hg2+, hence they are precipitated as chlorides.
Teacher's Note: Group I chlorides: Ag, Pb, Hg(I).
Exam Note: Compare Ksp values.
Question 207. There is no S–S bond in:
(a) S2O42–
(b) S2O52–
(c) S2O32–
(d) S2O72–
Solution. Answer: (d). Corrected: the printed key gives (b), drawing S2O52– as O2S–O–SO–; but disulphite (metabisulphite) is [O2S–SO3]2– and does have an S–S bond. Only pyrosulphate S2O72– (O3S–O–SO3) has an S–O–S bridge and no S–S bond.
Teacher's Note: Check each ion for sulphur-sulphur link.
Exam Note: Draw S2O72– and S2O52–.
Question 208. The species that do not contain peroxide ions are:
(a) PbO2
(b) H2O2
(c) SrO2
(d) BaO2
Solution. Answer: (a). PbO2 is an oxide (dioxide) and contains no O–O linkage, hence no peroxide ion.
Teacher's Note: Pb(IV) with O2–, not O22–.
Exam Note: Distinguish dioxide from peroxide.
Question 209. H2SO4 cannot be used to prepare HBr from NaBr as it:
(a) reacts slowly with NaBr
(b) oxidises HBr
(c) reduces HBr
(d) disproportionates HBr
Solution. Answer: (b). 2HBr + H2SO4 → SO2 + 2H2O + Br2; conc. H2SO4 oxidises HBr to Br2.
Teacher's Note: Use H3PO4 instead.
Exam Note: Write the oxidation equation.
Question 210. Arrange: List A: I. Explosive, II. Artificial gem, III. Self reduction, IV. Magnetic material. List B: A. NaN3, B. Fe3O4, C. Cr, D. Al2O3, E. Pb(N3)2, F. Fe2O3, G. Cu, H. SiC
(a) I-A, II-D, III-G, IV-B
(b) I-E, II-D, III-G, IV-F
(c) I-A, II-D, III-G, IV-F
(d) I-E, II-H, III-C, IV-B
Solution. Answer: (b). It is a fact (printed key): Pb(N3)2 is the explosive, Al2O3 (corundum, ruby) the artificial gem, Cu the metal obtained by self-reduction, Fe2O3 the magnetic material. Answer (b) as printed.
Teacher's Note: Match uses and compounds.
Exam Note: Match each category carefully.
Question 211. Hydrolysis of one mole of peroxodisulphuric acid produces:
(a) two mole of sulphuric acid
(b) two mole of peroxomonosulphuric acid
(c) one mole of sulphuric acid and one mole of peroxomonosulphuric acid
(d) one mole of sulphuric acid, one mole of peroxomonosulphuric acid and one mole of hydrogen peroxide
Solution. Answer: (c). H2S2O8 + H2O → H2SO5 + H2SO4; further hydrolysis of H2SO5 would give H2O2.
Teacher's Note: Stepwise hydrolysis: first Caro's acid.
Exam Note: Write the first hydrolysis step.
Question 212. The following compounds have been arranged in order of their increasing thermal stabilities. Identify the correct order: K2CO3 (I), MgCO3 (II), CaCO3 (III), BeCO3 (IV)
(a) I < II < III < IV
(b) IV < II < III < I
(c) IV < II < I < III
(d) II < IV < III < I
Solution. Answer: (b). The thermal stability of carbonates increases down the group, and alkali metal carbonates are more stable than alkaline earth ones: BeCO3 < MgCO3 < CaCO3 < K2CO3.
Teacher's Note: Smaller polarising cation gives more stable carbonate.
Exam Note: Use polarising power of cation.
Question 213. The following acids have been arranged in the order of decreasing acid strength. Identify the correct order: ClOH (I), BrOH (II), IOH (III)
(a) I > II > III
(b) II > I > III
(c) III > II > I
(d) I > III > II
Solution. Answer: (a). Acid strength decreases with decrease in electronegativity of the halogen: Cl > Br > I.
Teacher's Note: More electronegative halogen gives stronger acid.
Exam Note: State the electronegativity order.
Question 214. Sodium thiosulphate is prepared by:
(a) reducing Na2SO4 solution with H2S
(b) boiling Na2SO3 solution with S in alkaline medium
(c) neutralising H2S2O3 solution with NaOH
(d) boiling Na2SO3 solution with S in acidic medium
Solution. Answer: (b). Na2SO3 + S →(boil, alkaline) Na2S2O3.
Teacher's Note: Free H2S2O3 is unstable, so acidic medium fails.
Exam Note: Write the equation.
Question 215. Which of the following halides is least stable and has doubtful existence?
(a) CI4
(b) GeI4
(c) SnI4
(d) PbI4
Solution. Answer: (d). Pb4+ is a strong oxidant while I– is a strong reductant, so Pb4+ gets reduced to Pb2+ and PbI4 does not exist stably.
Teacher's Note: Inert pair effect plus reducing I–.
Exam Note: Write PbI4 → PbI2 + I2.
Question 216. Which one of the following oxides is neutral?
(a) CO
(b) SnO2
(c) ZnO
(d) SiO2
Solution. Answer: (a). It is a fact: CO is a neutral oxide (SnO2, ZnO amphoteric; SiO2 acidic).
Teacher's Note: Neutral oxides: CO, N2O, NO.
Exam Note: Classify the other three oxides.
Question 217. Which one of the following species is not pseudohalide?
(a) CNO–
(b) RCOO–
(c) OCN–
(d) NNN–1
Solution. Answer: (b). Several uninegative groups that show certain characteristics of halide ions are called pseudohalides; RCOO– is not one.
Teacher's Note: Pseudohalides: CN–, OCN–, SCN–, N3–.
Exam Note: Name four pseudohalides.
Question 218. On heating ammonium dichromate, the gas evolved is:
(a) Oxygen
(b) Ammonia
(c) Nitrous oxide
(d) Nitrogen
Solution. Answer: (d). (NH4)2Cr2O7 →(heat) N2 + Cr2O3 + 4H2O.
Teacher's Note: Nitrogen, not N2O, is evolved.
Exam Note: Give the equation.
Question 219. Amongst the following hydroxides, the one which has the lowest value of Ksp at ordinary temperature (at 25 °C) is:
(a) Mg(OH)2
(b) Ca(OH)2
(c) Ba(OH)2
(d) Be(OH)2
Solution. Answer: (d). It is due to the high lattice energy of Be(OH)2; solubility of group 2 hydroxides increases down the group, so Be(OH)2 has the lowest Ksp.
Teacher's Note: Hydroxide solubility rises down group 2.
Exam Note: State the group 2 hydroxide trend.
Question 220. Which one amongst the following pairs of ions cannot be separated by H2S in dilute HCl?
(a) Bi3+, Sn4+
(b) Al3+, Hg2+
(c) Zn2+, Cu2+
(d) Ni2+, Cu2+
Solution. Answer: (a). Both Bi3+ and Sn4+ (group II) are precipitated by H2S in presence of dil. HCl, hence cannot be separated; Al3+, Zn2+, Ni2+ are not precipitated (only Hg2+, Cu2+ are).
Teacher's Note: Pair separable only if exactly one is a group II ion.
Exam Note: Check each ion's group.
Question 221. Polyphosphates are used as water softening agents because they:
(a) form soluble complexes with anionic species
(b) precipitate anionic species
(c) form soluble complexes with cationic species
(d) precipitate cationic species
Solution. Answer: (c). They form soluble complex salts with cationic species: Na6[Na4(PO3)6] + CaSO4 → Na2[CaNa2(PO3)6] + Na2SO4 (calgon).
Teacher's Note: Calgon sequesters Ca2+ in a soluble complex.
Exam Note: Write the calgon reaction.
Question 222. Identify the correct order of acidic strength of CO2, CuO, CaO, H2O:
(a) CaO < CuO < H2O < CO2
(b) H2O < CuO < CaO < CO2
(c) CaO < H2O < CuO < CO2
(d) H2O < CO2 < CaO < CuO
Solution. Answer: (a). Acidic strength increases from left to right: CaO (highly basic) < CuO (weak base) < H2O (neutral) < CO2 (acidic).
Teacher's Note: Basic metal oxides, then neutral, then acidic oxide.
Exam Note: Classify each oxide first.
Question 223. For H3PO3 and H3PO4 the correct choice is:
(a) H3PO3 is dibasic and reducing
(b) H3PO3 is dibasic and non-reducing
(c) H3PO4 is tribasic and reducing
(d) H3PO3 is tribasic and non-reducing
Solution. Answer: (a). H3PO3 has two –OH groups and one P–H bond: dibasic acids have reducing nature (P(III) oxidised to P(V)).
Teacher's Note: Basicity = number of P–OH, not number of H.
Exam Note: Draw structure with P–H.
Question 224. The pair of compounds which cannot exist together in solution is:
(a) NaHCO3 and NaOH
(b) Na2CO3 and NaHCO3
(c) Na2CO3 and NaOH
(d) NaHCO3 and NaCl
Solution. Answer: (a). An acidic salt (NaHCO3) and a base (NaOH) cannot exist together because both react: NaHCO3 + NaOH → Na2CO3 + H2O.
Teacher's Note: Acid salt plus base neutralise.
Exam Note: Write the neutralisation.
Question 225. (Me)2SiCl2 on hydrolysis will produce:
(a) (Me)2Si(OH)2
(b) (Me)2Si=O
(c) –[–O(Me)2Si–O–]n–
(d) Me2SiCl(OH)
Solution. Answer: (c). Me2SiCl2 + 2H2O → Me2Si(OH)2 + 2HCl; the diol condenses (–H2O) to the linear silicone polymer –[O–SiMe2]n–.
Teacher's Note: Hydrolysis then polycondensation gives silicones.
Exam Note: Show condensation of the diol.
Question 226. When same mass of zinc is treated separately with excess of sulphuric acid and excess of sodium hydroxide, the ratio of volume of H2 evolved is:
(a) 1 : 1
(b) 1 : 2
(c) 2 : 1
(d) 9 : 4
Solution. Answer: (a). Zn + H2SO4 → ZnSO4 + H2; Zn + 2NaOH → Na2ZnO2 + H2. One mole of H2 per mole of Zn in both, so ratio 1 : 1.
Teacher's Note: Same moles of Zn give the same moles of H2.
Exam Note: Compare mole ratios.
Question 227. Which of the following is the weakest base?
(a) NaOH
(b) Ca(OH)2
(c) KOH
(d) Zn(OH)2
Solution. Answer: (d). Alkali and alkaline earth metal hydroxides are highly basic compared to the hydroxides of transition metals; Zn(OH)2 is the weakest base (amphoteric).
Teacher's Note: Transition-metal hydroxides are weak bases.
Exam Note: Compare metal electropositivity.
Question 228. The compound insoluble in acetic acid is:
(a) calcium oxide
(b) calcium carbonate
(c) calcium oxalate
(d) calcium hydroxide
Solution. Answer: (c). Calcium oxalate is insoluble in acetic acid (the others react with it).
Teacher's Note: CaC2O4 dissolves only in strong mineral acids.
Exam Note: Name the test for Ca2+ with oxalate.
Question 229. Iron is rendered passive by treatment with concentrated:
(a) H2SO4
(b) H3PO4
(c) HCl
(d) HNO3
Solution. Answer: (d). Fe is passive in conc. HNO3 because a thin layer of oxide is formed on its surface.
Teacher's Note: Passivation is a protective oxide film.
Exam Note: Name the film.
Question 230. The types of bonds present in CuSO4·5H2O are only:
(a) electrovalent and covalent
(b) electrovalent and coordinate covalent
(c) electrovalent, covalent and coordinate covalent
(d) covalent and coordinate covalent
Solution. Answer: (c). CuSO4·5H2O, [Cu(H2O)4]SO4·H2O, has electrovalent (Cu2+/SO42–), covalent (S–O, O–H) and coordinate covalent (O→Cu, S→O) bonds.
Teacher's Note: Hydrated sulphates have three bond types.
Exam Note: List the three bond types.
Question 231. Zinc-copper couple that can be used as a reducing agent is obtained by:
(a) mixing zinc dust and copper gauze
(b) zinc coated with copper
(c) copper coated with zinc
(d) zinc and copper wires welded together
Solution. Answer: (a). The Zn–Cu couple is obtained by mixing zinc dust and copper gauze.
Teacher's Note: Zn–Cu couple reduces alkyl halides.
Exam Note: State its use.
Question 232. Amongst the following, the lowest degree of paramagnetism per mole of the compound at 298 K will be shown by:
(a) MnSO4·4H2O
(b) CuSO4·5H2O
(c) FeSO4·6H2O
(d) NiSO4·6H2O
Solution. Answer: (b). Paramagnetism increases with unpaired electrons: Mn2+ 5, Cu2+ 1, Fe2+ 4, Ni2+ 2; Cu2+ has the fewest.
Teacher's Note: μ = √(n(n+2)).
Exam Note: List n for each ion.
Question 233. Ferric sulphate on heating gives:
(a) SO2 and SO3
(b) SO2 only
(c) SO3 only
(d) none of these
Solution. Answer: (c). Fe2(SO4)3 → Fe2O3 + 3SO3.
Teacher's Note: Fe(III) cannot reduce SO3 to SO2 (no change in O.N.).
Exam Note: Write the equation.
Question 234. Amongst Ni(CO)4, [Ni(CN)4]2– and NiCl42–:
(a) Ni(CO)4 and NiCl42– are diamagnetic and [Ni(CN)4]2– is paramagnetic
(b) NiCl42– and [Ni(CN)4]2– are diamagnetic and Ni(CO)4 is paramagnetic
(c) Ni(CO)4 and [Ni(CN)4]2– are diamagnetic and NiCl42– is paramagnetic
(d) Ni(CO)4 is diamagnetic and NiCl42– and [Ni(CN)4]2– are paramagnetic
Solution. Answer: (c). In Ni(CO)4 (Ni(0), 3d10, sp3) and [Ni(CN)4]2– (Ni2+, 3d8, dsp2, strong field pairs electrons) there are no unpaired electrons: diamagnetic. In NiCl42– (sp3, weak-field Cl–) two unpaired electrons remain: paramagnetic.
Teacher's Note: Strong-field CN–, CO pair electrons; Cl– does not.
Exam Note: Draw d8 box diagrams.
Question 235. Among the following ions which one has the highest paramagnetism?
(a) [Cr(H2O)6]3+
(b) [Fe(H2O)6]2+
(c) [Cu(H2O)6]2+
(d) [Zn(H2O)6]2+
Solution. Answer: (b). Unpaired electrons: Cr3+ (3d3) 3, Fe2+ (3d6) 4, Cu2+ (3d9) 1, Zn2+ (3d10) 0; paramagnetism is highest in [Fe(H2O)6]2+.
Teacher's Note: Water is weak field: Fe2+ stays high spin.
Exam Note: Count unpaired d electrons.
Question 236. Which one is solder?
(a) Cu + Pb
(b) Zn + Cu
(c) Pb + Sn
(d) Fe + Zn
Solution. Answer: (c). Solder is an alloy of Pb and Sn.
Teacher's Note: Solder: Pb–Sn, used for joining metals.
Exam Note: Name its composition.
Question 237. Which pair gives Cl2 at room temperature?
(a) Conc. HCl + KMnO4
(b) NaCl + Conc. H2SO4
(c) NaCl + MnO2
(d) NaCl + Conc. HNO3
Solution. Answer: (a). 2KMnO4 + 16HCl → 2KCl + 2MnCl2 + 5Cl2 + 8H2O at room temperature.
Teacher's Note: KMnO4 oxidises HCl without heating.
Exam Note: Balance the equation.
Question 238. Which of the following is formed when excess of KCN is added to aqueous solution of copper sulphate?
(a) Cu(CN)2
(b) K2[Cu(CN)4]
(c) K[Cu(CN)2]
(d) K3[Cu(CN)4]
Solution. Answer: (d). CuSO4 + 2KCN → Cu(CN)2 + K2SO4; 2Cu(CN)2 → Cu2(CN)2 + (CN)2 (cyanogen); Cu2(CN)2 + 6KCN → 2K3[Cu(CN)4].
Teacher's Note: Cu(II) is reduced to Cu(I) by CN–.
Exam Note: Give the three equations.
Question 239. Which compound does not dissolve in hot, dilute HNO3?
(a) HgS
(b) PbS
(c) CuS
(d) CdS
Solution. Answer: (a). HgS does not dissolve in hot dilute HNO3.
Teacher's Note: HgS needs aqua regia.
Exam Note: Recall which sulphide resists HNO3.
Question 240. Ammonium dichromate is used in some fireworks. The green coloured powder blown in the air is:
(a) CrO3
(b) Cr2O3
(c) Cr
(d) CrO(O2)
Solution. Answer: (b). The green colour is due to Cr2O3: (NH4)2Cr2O7 →(heat) Cr2O3 + N2 + 4H2O.
Teacher's Note: Green Cr(III) oxide is the residue.
Exam Note: Write the equation.
Question 241. Which of the following compounds is expected to be coloured?
(a) Ag2SO4
(b) CuF2
(c) MgF2
(d) CuCl
Solution. Answer: (b). CuF2 is coloured because Cu2+ (3d9) has an unpaired d electron; Ag+, Mg2+ and Cu+ have no unpaired electrons.
Teacher's Note: Colour needs d–d transition of unpaired electron.
Exam Note: Check d-electron configurations.
Question 242. Which of the following is an organometallic compound?
(a) Lithium methoxide
(b) Lithium acetate
(c) Lithium dimethylamide
(d) Methyl lithium
Solution. Answer: (d). Organometallic compounds have the metal atom directly bonded to a carbon atom: methyl lithium, H3C–Li.
Teacher's Note: Need an M–C bond, not M–O or M–N.
Exam Note: Identify the M–C bond.
Question 243. Among the following, the compound that is both paramagnetic and coloured is:
(a) K2Cr2O7
(b) (NH4)2(TiCl6)
(c) CoSO4
(d) K3[Cu(CN)4]
Solution. Answer: (c). Co2+ (3d7) has unpaired electrons, so CoSO4 is paramagnetic and coloured due to d–d transitions.
Teacher's Note: K2Cr2O7 is Cr(VI) d0, diamagnetic.
Exam Note: Check unpaired electrons.
Question 244. A black sulphide is formed when excess of H2S acts on:
(a) Sodium chloride
(b) Cadmium chloride
(c) Zinc chloride
(d) Cupric chloride
Solution. Answer: (d). CuCl2 + H2S → CuS↓ (black) + 2HCl; CdS is yellow, ZnS white.
Teacher's Note: Colour of sulphides: CuS black, CdS yellow.
Exam Note: Recall sulphide colours.
Question 245. In the dichromate anion:
(a) 4Cr–O bonds are equivalent
(b) 6Cr–O bonds are equivalent
(c) All Cr–O bonds are equivalent
(d) All Cr–O bonds are non-equivalent
Solution. Answer: (b). In the dichromate dianion two CrO4 tetrahedra share one O (Cr–O–Cr angle 131°). By resonance, the six terminal Cr–O bonds are equivalent while the bridge bonds differ.
Teacher's Note: Resonance equalises terminal bonds.
Exam Note: Count terminal and bridging bonds.
Question 246. The geometries of Ni(CO)4 and Ni(PPh3)2Cl2 are:
(a) both square planar
(b) tetrahedral and square planar, respectively
(c) both tetrahedral
(d) square planar and tetrahedral, respectively
Solution. Answer: (c). Both complexes are tetrahedral (sp3): Ni(CO)4 has Ni(0), 3d10, CO pairs electrons; Ni(PPh3)2Cl2 has Ni(II), 3d8 with two unpaired electrons.
Teacher's Note: PPh3 and Cl– are weak field here.
Exam Note: Determine hybridisation for each.
Question 247. Animal charcoal used is decolorising agent contains carbon and ......
(a) Ca3(PO4)2
(b) MgCl2
(c) KMnO4
(d) K2Cr2O7
Solution. Answer: (a). Bones contain Ca3(PO4)2; animal charcoal is obtained from bone ash.
Teacher's Note: Bone charcoal is carbon plus calcium phosphate.
Exam Note: State the source.
Question 248. Which of the following is called super acid?
(a) HI
(b) SbF5
(c) H3SbO4
(d) H3AsO4
Solution. Answer: (b). SbF5 has the strongest tendency to accept a lone pair of electrons: SbF5 + F– → [SbF6]–; it is the Lewis super acid.
Teacher's Note: Super acids are extremely strong Lewis/Brønsted acids.
Exam Note: Name HF–SbF5 magic acid.
Question 249. A complex [CoL6]n+, where L is neutral ligand magnetic moment μ = 4.5 B.M. Hence:
(a) Co must be in +2 oxidation state
(b) Co must be in +3 oxidation state
(c) The complex is diamagnetic
(d) L must be a strong field ligand
Solution. Answer: (b). μ = √(n(n+2)) = 4.5 gives n = 4 unpaired electrons, which fits Co3+ (3d6, high spin with weak field L); Co2+ would give 3 (μ = 3.87) or 1 unpaired electrons.
Teacher's Note: 4.5 BM means four unpaired electrons.
Exam Note: Solve n(n+2) = 20.25.
Question 250. CrO42– is yellow in colour because:
(a) Cr is a transition metal
(b) Cr and O are π-bonded and the allowed π → π* transition occurs in visible region
(c) of charge transfer from Cr → O
(d) of its strong tendency of absorption ~ 640 nm wavelength
Solution. Answer: (c). It is a fact: the yellow colour of CrO42– arises from charge transfer (ligand-to-metal, O → Cr, by the usual convention), as Cr(VI) is d0. Answer (c) as printed.
Teacher's Note: d0 ion: colour comes from charge transfer.
Exam Note: Explain d0 colour origin.
Question 251. Number of unpaired electrons in [Cr(en)3]2+ are:
(a) 4
(b) 2
(c) 3
(d) 1
Solution. Answer: (b). Cr in [Cr(en)3]2+ is a low-spin complex having d4 configuration of Cr2+, so 2 unpaired electrons.
Teacher's Note: Strong-field en pairs electrons: t2g4.
Exam Note: Draw t2g4 filling.
Question 252. MnO42– ion shows ...... colour in aqueous solution:
(a) Green
(b) Purple
(c) Orange
(d) Blue
Solution. Answer: (a). MnO42– (manganate) ion is green in colour.
Teacher's Note: MnO4– is purple; MnO42– is green.
Exam Note: Contrast manganate and permanganate.
Previous Year Objective Problems (One Answer Correct)
Question 1 (Previous Year Objective). The chemical process in the production of steel from haematite ore involves: (IIT 2000)
(a) reduction
(b) oxidation
(c) reduction followed by oxidation
(d) oxidation followed by reduction
Solution. Answer: (d). Haematite (Fe2O3) containing little FeO is first oxidised so that FeO becomes Fe2O3, and then reduced to Fe by CO.
Teacher's Note: Oxidation of FeO first, then CO reduction.
Exam Note: State the order of the two steps.
Question 2 (Previous Year Objective). Electrolyte reduction of alumina to aluminium by Hall–Heroult process is carried out: (IIT 2000)
(a) in the presence of NaCl
(b) in the presence of fluorite
(c) in the presence of cryolite which forms a melt with lowers melting temperature
(d) in the presence of cryolite which forms a melt with higher melting temperature
Solution. Answer: (c). Cryolite is added to lower the melting point of alumina as well as to make it a good conductor of current.
Teacher's Note: Cryolite lowers m.p. and raises conductivity.
Exam Note: Give two roles of cryolite.
Question 3 (Previous Year Objective). Ammonia can be dried by: (IIT 2000)
(a) conc. H2SO4
(b) P4O10
(c) CaO
(d) anhydrous CaCl2
Solution. Answer: (c). CaO, being basic, does not react with NH3; the other three react with it.
Teacher's Note: Dry a basic gas with a basic desiccant.
Exam Note: Why CaCl2 fails (CaCl2·8NH3).
Question 4 (Previous Year Objective). The correct order of acidic nature is: (IIT 2000)
(a) Cl2O7 > SO2 > P4O10
(b) CO2 > N2O5 > SO3
(c) Na2O > MgO > Al2O3
(d) K2O > CaO > MgO
Solution. Answer: (a). Acidic character of non-metal oxides increases along the period (P4O10 < SO2 < Cl2O7).
Teacher's Note: Acidity of oxides rises across a period.
Exam Note: Order the third-period oxides.
Question 5 (Previous Year Objective). The number of P–O–P bonds in cyclic meta phosphoric acid is: (IIT 2000)
(a) zero
(b) two
(c) three
(d) four
Solution. Answer: (c). Cyclic metaphosphoric acid is H3P3O9, a six-membered ring of three P and three O atoms, so it has three P–O–P bonds.
Teacher's Note: (HPO3)3 ring: 3 P–O–P links.
Exam Note: Draw the P3O3 ring.
Question 6 (Previous Year Objective). The number of S–S bonds in trimer of sulphur trioxide (S3O9) is: (IIT 2001)
(a) 3
(b) 2
(c) 1
(d) 0
Solution. Answer: (d). The cyclic trimer (SO3)3 is a six-membered ring of alternating S and O atoms; it has only S–O–S links and no S–S bond.
Teacher's Note: Ring contains S–O–S bridges only.
Exam Note: Draw the (SO3)3 ring.
Question 7 (Previous Year Objective). The chemical composition of slag formed during melting process in the extraction of Cu is: (IIT 2001)
(a) Cu2O + FeS
(b) FeSiO3
(c) CuFeS2
(d) Cu2S + FeO
Solution. Answer: (b). The non-fusible mass (basic gangue) FeO is removed by acidic flux SiO2 in the form of slag FeSiO3.
Teacher's Note: FeO + SiO2 → FeSiO3.
Exam Note: Write the slag-forming equation.
Question 8 (Previous Year Objective). The complex ion which has no 'd' electron in the central metal atom is: (IIT 2001)
(a) [MnO4]–
(b) [Co(NH3)6]3+
(c) [Fe(CN)6]3–
(d) [Cr(H2O)6]3+
Solution. Answer: (a). Co3+, Fe3+ and Cr3+ have 6, 5 and 3 d electrons; Mn in MnO4– is Mn(VII), d0.
Teacher's Note: Find d-electron count from oxidation state.
Exam Note: Compute d-count for each metal.
Question 9 (Previous Year Objective). Which process is used in the extractive metallurgy of Mg? (IIT 2002)
(a) Fused salt electrolysis
(b) Self reduction
(c) Aqueous solution electrolysis
(d) Thermite reduction
Solution. Answer: (a). Highly electropositive metals (alkali, alkaline earth, aluminium) are extracted by electrolysis of their fused salts; in aqueous state H+ is discharged. Anode/cathode: Mg2+ + 2e– → Mg (fused).
Teacher's Note: Reactive metals need molten-salt electrolysis.
Exam Note: Why aqueous electrolysis fails.
Question 10 (Previous Year Objective). Polyphosphates are used as water softening agents because they: (IIT 2002)
(a) form soluble complexes with anionic species
(b) precipitate anionic species
(c) form soluble complexes with cationic species
(d) precipitate cationic species
Solution. Answer: (c). Na6[Na4(PO3)6] + 2Ca2+ → Na2[Ca2(PO3)6] + 4Na+; Ca2+ is removed from water as a soluble complex. Corrected: the printed key letter is (a), but the explanation (and the identical Q221 above) shows complex formation with cationic species, option (c).
Teacher's Note: Calgon sequesters Ca2+ in a soluble complex anion.
Exam Note: Write the calgon reaction.
Question 11 (Previous Year Objective). Anhydrous ferric chloride is prepared by: (IIT 2002)
(a) heating hydrated ferric chloride at a high temperature in a stream of air
(b) heating metallic iron in a stream of dry chlorine gas
(c) reaction of ferric oxide with HCl(aq.)
(d) reaction of metallic iron with HCl(aq.)
Solution. Answer: (b). 2Fe + 3Cl2 → 2FeCl3. In (a), (c) and (d) hydrated ferric chloride (FeCl3·6H2O) is formed.
Teacher's Note: Anhydrous halide needs dry halogen.
Exam Note: Why hydrate formation blocks other routes.
Question 12 (Previous Year Objective). An aqueous solution of a substance gives a white precipitate on treatment with dilute hydrochloric acid, which dissolves on heating. When hydrogen sulphide is passed through the hot acidic solution, a black precipitate is obtained. The substance is a: (IIT 2002)
(a) Hg22+ salt
(b) Cu2+ salt
(c) Ag+ salt
(d) Pb2+ salt
Solution. Answer: (d). PbCl2 is soluble in hot water but insoluble in cold: Pb2+ + 2HCl → PbCl2↓ (white), which on heating dissolves; hot acidic PbCl2 + H2S → PbS↓ (black).
Teacher's Note: Only PbCl2 is soluble in hot water.
Exam Note: Give both observations.
Question 13 (Previous Year Objective). The correct order of solubility of Na2S, CuS and ZnS in aqueous medium: (IIT 2002)
(a) CuS > ZnS > Na2S
(b) ZnS > Na2S > CuS
(c) Na2S > CuS > ZnS
(d) Na2S > ZnS > CuS
Solution. Answer: (d). Ksp of CuS is less than ZnS, so ZnS is more soluble than CuS; sodium salts are highly soluble in water.
Teacher's Note: Compare Ksp: CuS << ZnS.
Exam Note: Rank by Ksp and ionic nature.
Question 14 (Previous Year Objective). A gas 'X' is passed through water to form a saturated solution. The aqueous solution on treatment with silver nitrate gives a white precipitate. The saturated aqueous solution also dissolves magnesium ribbon with evolution of a colourless gas 'Y'. Identify 'X' and 'Y': (IIT 2002)
(a) X = CO2, Y = Cl2
(b) X = Cl2, Y = CO2
(c) X = Cl2, Y = H2
(d) X = H2, Y = Cl2
Solution. Answer: (c). Cl2 + H2O → HOCl + HCl (X = Cl2); HCl + AgNO3 → AgCl↓ + HNO3; Mg + 2HCl → MgCl2 + H2 (Y = H2).
Teacher's Note: Cl2 water gives HCl, which reacts with Ag+ and Mg.
Exam Note: Identify X from the AgCl test.
Question 15 (Previous Year Objective). (Me)2SiCl2 on hydrolysis produces: (IIT 2003)
(a) (Me)2Si(OH)2
(b) (Me)2Si=O
(c) –[–O–(Me)2Si–O–]n–
(d) Me2SiCl(OH)
Solution. Answer: (c). Corrected: the printed key gives (a) (the diol Me2Si(OH)2, formed first), but the diol is unstable and condenses with loss of water to the linear silicone polymer –[O–SiMe2]n–, option (c), as in Q225 above.
Teacher's Note: Hydrolysis then polycondensation gives silicone.
Exam Note: Show diol condensing.
Question 16 (Previous Year Objective). When MnO2 is fused with KOH, a coloured compound is formed. The product and its colour is: (IIT 2003)
(a) K2MnO4, purple
(b) KMnO4, purple
(c) Mn2O3, brown
(d) Mn3O4, black
Solution. Answer: (a). 2MnO2 + 4KOH + O2 → 2K2MnO4 + 2H2O. K2MnO4 (manganate, normally described as dark green) is the product; (a) is the only option naming it. Answer (a) as printed.
Teacher's Note: Fusion with alkali in air gives manganate.
Exam Note: Name MnO2 fusion product.
Question 17 (Previous Year Objective). Between H3PO3 and H3PO4: (IIT 2003)
(a) H3PO3–reductant and monobasic acid
(b) H3PO3–reductant and dibasic acid
(c) H3PO4–not reductant and monobasic acid
(d) H3PO4–reductant and tribasic acid
Solution. Answer: (b). H3PO3 (HPO(OH)2, P(III)) is dibasic and a reductant; H3PO4 is tribasic (P(V)) and cannot be oxidised further.
Teacher's Note: Basicity = number of P–OH.
Exam Note: Draw both structures.
Question 18 (Previous Year Objective). Roasted gold ore + CN– + H2O →(O2) [X] + OH–; [X] + Zn → [Y] + Au. [X] and [Y] are: (IIT 2003)
(a) X = [Au(CN)2]–, Y = [Zn(CN)4]2–
(b) X = [Au(CN)4]3–, Y = [Zn(CN)4]2–
(c) X = [Au(CN)2]–, Y = [Zn(CN)6]4–
(d) X = [Au(CN)4]3–, Y = [Zn(CN)6]4–
Solution. Answer: (a). 2Au + 4CN– + H2O + ½O2 → 2[Au(CN)2]– + 2OH–; 2[Au(CN)2]– + Zn → [Zn(CN)4]2– + 2Au.
Teacher's Note: Cyanide process: Au(I) complex, displaced by Zn.
Exam Note: Write both steps.
Question 19 (Previous Year Objective). Mixture X of 0.02 mole of [Co(NH3)5SO4]Br and 0.02 mole of [Co(NH3)5Br]SO4 was prepared in 2 litre of solution: 1 litre of mixture X + excess of AgNO3 → Y; 1 litre of mixture X + excess of BaCl2 → Z. Number of mole of Y and Z respectively are: (IIT 2003)
(a) 0.01, 0.01
(b) 0.02, 0.01
(c) 0.01, 0.02
(d) 0.02, 0.02
Solution. Answer: (a). Only primary valencies (ionic) are ionised. Each salt is 0.01 M in 1 litre, so 1 litre contains 0.01 mol of each. [Co(NH3)5SO4]Br + AgNO3 → AgBr (0.01 mol, Y); [Co(NH3)5Br]SO4 + BaCl2 → BaSO4 (0.01 mol, Z). Mole ratio Y : Z = 1 : 1.
Teacher's Note: Only free Br– and SO42– precipitate.
Exam Note: Find ions outside the coordination sphere.
Question 20 (Previous Year Objective). [X] + H2SO4 → [Y] a colourless gas with irritating smell; [Y] + K2Cr2O7 + H2SO4 → green solution. [X] and [Y] are: (IIT 2003)
(a) SO32–, SO2
(b) Cl–, HCl
(c) S2–, H2S
(d) CO32–, CO2
Solution. Answer: (a). SO32– + H2SO4 → SO2 + SO42– + H2O (burning-sulphur smell); SO2 turns acidified K2Cr2O7 green: 3SO2 + K2Cr2O7 + H2SO4 → K2SO4 + Cr2(SO4)3 + H2O. (S2– would give H2S, rotten egg smell.)
Teacher's Note: SO2 reduces orange dichromate to green Cr3+.
Exam Note: Name test for SO2.
Question 21 (Previous Year Objective). A solution which is 10–3 M each in Mn2+, Fe2+, Zn2+ and Hg2+ is treated with 10–16 M sulphide ion. If Ksp of MnS, FeS, ZnS and HgS are 10–13, 10–18, 10–24 and 10–53 respectively, which one will precipitate first? (IIT 2003)
(a) FeS
(b) MgS
(c) HgS
(d) ZnS
Solution. Answer: (c). [S2–] needed for precipitation = Ksp/[M2+]: MnS 10–13/10–3 = 10–10 M, FeS 10–15 M, ZnS 10–21 M, HgS 10–50 M. Minimum [S2–] is needed for HgS, so it will precipitate first.
Teacher's Note: Smallest Ksp/[M2+] precipitates first.
Exam Note: Compute Ksp/[M2+] for each.
Question 22 (Previous Year Objective). By which process Pb and Sn are extracted respectively by: (IIT 2004) [printed "Pd"]
(a) carbon reduction : self reduction
(b) self reduction : carbon reduction
(c) electrolytic reduction : cyanide process
(d) cyanide process : electrolytic reduction
Solution. Answer: (b). Pb: 2PbS + 3O2 → 2PbO + 2SO2; 2PbO + PbS → 3Pb + SO2 (self reduction). Sn: SnO2 + 2C → Sn + 2CO2 (carbon reduction).
Teacher's Note: Galena roasts partly then self-reduces.
Exam Note: Write the two Pb steps.
Question 23 (Previous Year Objective). A sodium salt on treatment with MgCl2 gives white precipitate only on heating. The anion of sodium salt is: (IIT 2004)
(a) HCO3–
(b) CO32–
(c) NO3–
(d) SO42–
Solution. Answer: (a). 2NaHCO3 + MgCl2 →(heat) MgCO3↓ + 2NaCl + H2O + CO2; Mg(HCO3)2 is soluble and precipitates only on heating.
Teacher's Note: Bicarbonate gives precipitate only when hot.
Exam Note: Contrast with carbonate (cold precipitate).
Question 24 (Previous Year Objective). The species having tetrahedral shape is: (IIT 2004)
(a) [PdCl4]2–
(b) [Ni(CN)4]2–
(c) [Pd(CN)4]2–
(d) [NiCl4]2–
Solution. Answer: (d). The magnetic moment of [NiCl4]2– shows it is paramagnetic with two unpaired electrons (Ni2+ is 3d8). The four electron pairs from Cl– lead to sp3 hybridisation and do not disturb the 3d8 configuration: tetrahedral.
Teacher's Note: Weak-field Cl– gives tetrahedral Ni(II).
Exam Note: Count unpaired electrons.
Question 25 (Previous Year Objective). The spin magnetic moment of cobalt in Hg[Co(SCN)4] is: (IIT 2004)
(a) √3
(b) √8
(c) √15
(d) √24
Solution. Answer: (c). Co exists as Co2+ (3d7); SCN– provides four electron pairs, sp3, so three unpaired electrons remain. μ = √(n(n+2)) = √(3 × 5) = √15 BM.
Teacher's Note: Co2+ is d7 with 3 unpaired electrons.
Exam Note: Use μ = √(n(n+2)).
Question 26 (Previous Year Objective). (NH4)2Cr2O7 on heating gives a gas which is also given by: (IIT 2004)
(a) heating NH4NO2
(b) heating NH4NO3
(c) Mg3N2 + H2O
(d) Na + H2O2
Solution. Answer: (a). (NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O; NH4NO2 → N2 + 2H2O (NH4NO3 gives N2O).
Teacher's Note: Both give N2.
Exam Note: Write both equations.
Question 27 (Previous Year Objective). The acid having O–O bond is: (IIT 2004)
(a) H2S2O3
(b) H2S2O8
(c) H2S2O6
(d) H2S4O6
Solution. Answer: (b). H2S2O8 (peroxodisulphuric acid) is HO–SO2–O–O–SO2–OH, containing the peroxide O–O linkage.
Teacher's Note: Peroxoacids have O–O.
Exam Note: Draw H2S2O8.
Question 28 (Previous Year Objective). The product of oxidation of I– with MnO4– in alkaline medium is: (IIT 2004)
(a) IO3–
(b) I2
(c) IO–
(d) IO4–
Solution. Answer: (a). 2MnO4– + I– + H2O → 2MnO2 + IO3– + 2OH–.
Teacher's Note: In alkaline medium iodide goes to iodate.
Exam Note: Balance the equation.
Question 29 (Previous Year Objective). Which ore contains both iron and copper? (IIT 2005)
(a) Cuprite
(b) Chalcocite
(c) Chalcopyrite
(d) Malachite
Solution. Answer: (c). Cuprite (Cu2O), chalcocite (Cu2S), chalcopyrite (CuFeS2) and malachite (CuCO3·Cu(OH)2); only chalcopyrite contains Fe.
Teacher's Note: CuFeS2 is copper pyrites.
Exam Note: Write formulae of four ores.
Question 30 (Previous Year Objective). Which pair of compounds is expected to show similar colour in aqueous solution? (IIT 2005)
(a) FeCl2, CuCl2
(b) VOCl2, CuCl2
(c) VOCl2, FeCl2
(d) FeCl2, MnCl2
Solution. Answer: (b). Corrected: the printed key gives (a) "FeCl2 and CuCl2 are green", but in dilute aqueous solution Fe2+ is pale green and Cu2+ blue. VO2+ (VOCl2) and Cu2+ both give blue solutions, so the similar-colour pair is (b).
Teacher's Note: Fe2+ aq pale green; CuCl2 conc. is green.
Exam Note: Answer as printed; note colours.
Question 31 (Previous Year Objective). Which kind of isomerism is exhibited by octahedral [Co(NH3)4Br2]Cl? (IIT 2005)
(a) Geometrical and ionization
(b) Geometrical and optical
(c) Optical and ionization
(d) Geometrical only
Solution. Answer: (a). [Co(NH3)4Br2]Cl has cis and trans forms (geometrical), has no optical isomers (the figure shows cis/trans forms), and an ionisation isomer [Co(NH3)4BrCl]Br. Answer (a).
Teacher's Note: Ionisation: exchange of Br– and Cl– between sphere and counter-ion.
Exam Note: Draw cis and trans forms.
Question 32 (Previous Year Objective). A metal nitrate reacts with KI to give a black precipitate which on addition of excess of KI converts into orange colour solution. The cation of metal nitrate is: (IIT 2005)
(a) Hg2+
(b) Bi3+
(c) Pb2+
(d) Cu+
Solution. Answer: (b). Bi(NO3)3 + 3KI → BiI3↓ (black) + 3KNO3; BiI3 + KI → K[BiI4] (soluble, orange).
Teacher's Note: Black BiI3 dissolves in excess KI.
Exam Note: Name the orange complex.
Question 33 (Previous Year Objective). When PbO2 reacts with conc. HNO3, the gas evolved is: (IIT 2005)
(a) NO2
(b) O2
(c) N2
(d) N2O
Solution. Answer: (b). PbO2 + 2HNO3 → Pb(NO3)2 + H2O + ½O2.
Teacher's Note: Pb(IV) oxidises water; O2 evolves.
Exam Note: Write the equation.
Question 34 (Previous Year Objective). Name of the structure of silicate in which three oxygen atoms of [SiO4]4– are shared: (IIT 2005)
(a) Pyrosilicate
(b) Sheet silicate
(c) Linear chain silicate
(d) Three dimensional silicates
Solution. Answer: (b). Two-dimensional sheet structures are formed when three oxygen atoms of each [SiO4]4– tetrahedron are shared.
Teacher's Note: 3 shared O = sheet; 2 = chain; 4 = 3D.
Exam Note: Link shared oxygens to structure.
Question 35 (Previous Year Objective). The most thermodynamically stable allotropic form of phosphorus is: (IIT 2005)
(a) red
(b) white
(c) black
(d) yellow
Solution. Answer: (c). ΔG = 0 for white P is assumed arbitrarily, but the most stable form is black P.
Teacher's Note: Black P is the most stable allotrope.
Exam Note: Order: black > red > white.
Question 36 (Previous Year Objective). Which blue liquid is obtained on reacting equimolar amounts of NO and NO2 gases at –30 °C? (IIT 2005)
(a) N2O
(b) N2O3
(c) N2O4
(d) N2O5
Solution. Answer: (b). NO + NO2 → N2O3 (blue liquid).
Teacher's Note: N2O3 is the anhydride of nitrous acid.
Exam Note: Write the equation.
Question 37 (Previous Year Objective). Which of the following is not oxidised by O3? (IIT 2005)
(a) KI
(b) FeSO4
(c) KMnO4
(d) K2MnO4
Solution. Answer: (c). Mn in KMnO4 is already in its highest oxidation state, Mn7+, so it cannot be oxidised further.
Teacher's Note: Highest oxidation state cannot be oxidised.
Exam Note: Compare Mn in K2MnO4.
Question 38 (Previous Year Objective). How can the reaction below be made to proceed in forward direction? B(OH)3 + NaOH ⇌ [NaB(OH)4] or [NaBO2 + H2O] (IIT 2006)
(a) Addition of cis-1,2-diol
(b) Addition of borax
(c) Addition of trans-1,2-diol
(d) Addition of Na2HPO4
Solution. Answer: (a). Due to formation of a chelated complex (boric acid binds a cis-1,2-diol), the reaction proceeds in the forward direction.
Teacher's Note: cis-diol chelates boron and removes it from equilibrium.
Exam Note: Why trans-diol cannot chelate.
Question 39 (Previous Year Objective). A solution when diluted with H2O and boiled a white precipitate is obtained. On addition of excess NH4Cl/NH4OH, the volume of precipitate decreases leaving behind a gelatinous precipitate. The precipitate is: (IIT 2006)
(a) Zn(OH)2
(b) Al(OH)3
(c) Mg(OH)2
(d) Ca(OH)2
Solution. Answer: (a). The printed key gives (a), explaining that Zn(OH)2 dissolves in excess NH3 as [Zn(NH3)4]2+, so the volume of precipitate decreases. Answer (a) as printed; the gelatinous residue left behind would be Al(OH)3 (flagged for human check).
Teacher's Note: Zn(OH)2 dissolves in excess NH3 as an ammine.
Exam Note: Write [Zn(NH3)4]2+ formation.
Question 40 (Previous Year Objective). If the bond length of C–O in carbon monoxide is 1.128 Å, the bond length of C–O in Fe(CO)5 is: (IIT 2006)
(a) 1.15 Å
(b) 1.128 Å
(c) 1.72 Å
(d) 1.118 Å
Solution. Answer: (a). Due to synergic bond formation between metal and CO, the bond order of CO decreases a little, so the C–O bond length increases slightly (1.15 Å).
Teacher's Note: Back donation populates π* of CO.
Exam Note: Explain synergic bonding.
Question 41 (Previous Year Objective). The species present in solution when CO2 is dissolved in water are: (IIT 2006)
(a) CO2, H2CO3, HCO3–, CO32–
(b) H2CO3, CO32–
(c) CO32–, HCO3–
(d) CO2, H2CO3
Solution. Answer: (a). CO2 + H2O ⇌ H2CO3 ⇌ H+ + HCO3– ⇌ H+ + CO32–; CO2 is a diprotic acid anhydride, so all four species are present.
Teacher's Note: Dibasic carbonic acid ionises in two steps.
Exam Note: Write both ionisations.
Question 42 (Previous Year Objective). CuSO4 decolourises on addition of KCN. The product is: (IIT 2006)
(a) [Cu(CN)4]2–
(b) Cu2+ get reduced to form [Cu(CN)4]3–
(c) Cu(CN)2
(d) CuCN
Solution. Answer: (b). CuSO4 + KCN → Cu(CN)2; 2Cu(CN)2 → 2CuCN + (CN)2; with excess KCN, CuCN + 3KCN → K3[Cu(CN)4] (colourless, Cu(I)).
Teacher's Note: Cu(II) is reduced by CN– to Cu(I).
Exam Note: Give the three steps.
Question 43 (Previous Year Objective). MgSO4 on reaction with NH4OH and Na2HPO4 forms a white ppt. It is: (IIT 2006)
(a) Mg(NH4)PO4
(b) Mg3(PO4)2
(c) MgCl2·MgSO4
(d) MgSO4
Solution. Answer: (a). Mg2+ + NH4OH + Na2HPO4 → Mg(NH4)PO4↓ (a test for Mg2+).
Teacher's Note: Magnesium ammonium phosphate test.
Exam Note: Name the test.
Question 44 (Previous Year Objective). Among the following, the paramagnetic compound is: (IIT 2007)
(a) Na2O2
(b) O3
(c) N2O
(d) KO2
Solution. Answer: (d). KO2 contains the O2– ion, which has one unpaired electron; Na2O2 (O22–), O3 and N2O are diamagnetic.
Teacher's Note: Superoxide has an odd electron.
Exam Note: Count electrons in O2–.
Question 45 (Previous Year Objective). The species having bond order different from that in CO is: (IIT 2007)
(a) NO–
(b) NO+
(c) CN–
(d) N2
Solution. Answer: (a). Bond order of CO is 3 and that of NO– is 2.0; NO+, CN– and N2 are also 3.
Teacher's Note: 14-electron species have bond order 3.
Exam Note: Compare electron counts.
Question 46 (Previous Year Objective). Extraction of zinc from zinc blende is achieved by: (IIT 2007)
(a) electrolytic reduction
(b) roasting followed by reduction with carbon
(c) roasting followed by reduction with another metal
(d) roasting followed by self reduction
Solution. Answer: (b). ZnS is roasted to ZnO (2ZnS + 3O2 → 2ZnO + 2SO2), which is reduced by carbon: ZnO + C → Zn + CO. ZnO is reduced by carbon.
Teacher's Note: Roast then smelt.
Exam Note: Write both steps.
Question 47 (Previous Year Objective). The percentage of p-character in the orbitals forming P–P bonds in P4 is: (IIT 2007)
(a) 25
(b) 33
(c) 50
(d) 75
Solution. Answer: (d). P4 has sp3 hybridisation (printed key) and thus 75% p-character. Answer (d) as printed.
Teacher's Note: Bond angle 60° implies mostly p character.
Exam Note: State the percentage from sp3.
Question 48 (Previous Year Objective). Among the following metal carbonyls, the C–O bond order is lowest in: (IIT 2007)
(a) [Mn(CO)6]+
(b) [Fe(CO)5]
(c) [Cr(CO)6]
(d) [V(CO)6]–
Solution. Answer: (d). In M←C≡O bonding, back donation of metal d electrons into the π* orbital of CO reduces the C–O bond order; the more negative the charge (V(–I)) the greater the back donation, so [V(CO)6]– has the lowest C–O bond order.
Teacher's Note: Negative charge on metal strengthens back bonding.
Exam Note: Link charge to back donation.
Question 49 (Previous Year Objective). A solution of a metal ion when treated with KI gives a red precipitate which dissolves in excess KI to give a colourless solution. Moreover, the metal ion on treatment with a solution of cobalt(II) thiocyanate gives rise to deep blue crystalline precipitate. The metal ion is: (IIT 2007)
(a) Pb2+
(b) Hg2+
(c) Cu2+
(d) Co2+
Solution. Answer: (b). Hg2+ + 2I– → HgI2 (scarlet red ppt.); HgI2 + 2I– → [HgI4]2– (soluble); Hg2+ + Co(SCN)2 → Co[Hg(SCN)4] (deep blue ppt.).
Teacher's Note: Red HgI2 dissolves in excess KI.
Exam Note: Name the colourless complex.
Question 50 (Previous Year Objective). Native silver metal forms a water soluble complex with a dilute aqueous solution of NaCN in presence of: (IIT 2008)
(a) nitrogen
(b) oxygen
(c) CO2
(d) Ar
Solution. Answer: (b). 4Ag + 8NaCN + 2H2O + O2 → 4Na[Ag(CN)2] + 4NaOH; oxygen oxidises Ag.
Teacher's Note: Cyanide leaching needs O2.
Exam Note: Write the equation.
Question 51 (Previous Year Objective). Aqueous solution of Na2S2O3 on reaction with Cl2 gives: (IIT 2008)
(a) Na2S4O6
(b) NaHSO4
(c) NaCl
(d) NaOH
Solution. Answer: (b). Na2S2O3 + 4Cl2 + 5H2O → 2NaHSO4 + 8HCl.
Teacher's Note: Cl2 oxidises thiosulphate fully to sulphate.
Exam Note: Contrast with I2 (tetrathionate).
Question 52 (Previous Year Objective). Among the following, the coloured compound is: (IIT 2008)
(a) CuCl
(b) K3[Cu(CN)4]
(c) CuF2
(d) [Cu(CH3CN)4]BF4
Solution. Answer: (c). CuF2 is a blue coloured crystalline solid (Cu2+, d9); the others are Cu(I), d10, colourless.
Teacher's Note: Cu(II) has one unpaired electron.
Exam Note: State d-configuration.
Question 53 (Previous Year Objective). The IUPAC name of [Ni(NH3)4][NiCl4] is: (IIT 2008)
(a) Tetrachloronickel (II)-tetraamminenickel (II)
(b) Tetraamminenickel (II)-tetrachloronickel (II)
(c) Tetraamminenickel (II) tetrachloronickelate (II)
(d) Tetrachloronickel (II)-tetraamminenickelate (0)
Solution. Answer: (c). Follow IUPAC rules: cation named first, anionic complex ends in –ate: tetraamminenickel(II) tetrachloronickelate(II).
Teacher's Note: Cation first, anion with –ate.
Exam Note: Name cation and anion separately.
Question 54 (Previous Year Objective). Both [Ni(CO)4] and [Ni(CN)4]2– are diamagnetic. The hybridisation of nickel in the compounds respectively are: (IIT 2008)
(a) sp3, sp3
(b) sp3, dsp2
(c) dsp2, sp3
(d) dsp2, dsp2
Solution. Answer: (b). Ni in [Ni(CO)4]: 3d84s2 rearranges to 3d10, sp3 (tetrahedral). Ni2+ in [Ni(CN)4]2–: 3d8, strong-field CN– pairs the electrons, dsp2 (square planar).
Teacher's Note: Strong field makes Ni(II) square planar.
Exam Note: Draw the 3d box diagrams.
Question 55 (Previous Year Objective). The co-ordination number of Al in crystalline state of AlCl3 is: (IIT 2009)
(a) 2
(b) 4
(c) 6
(d) 8
Solution. Answer: (b). AlCl3 (Al2Cl6) in the solid state has co-ordination number four as stated in the key.
Teacher's Note: Dimer: each Al is tetrahedral.
Exam Note: Draw Al2Cl6.
Question 56 (Previous Year Objective). The spin only magnetic moment value (in Bohr magneton units) of Cr(CO)6 is: (IIT 2009)
(a) 0
(b) 2.84
(c) 4.90
(d) 5.92
Solution. Answer: (a). CO is a strong-field ligand, so Cr (3d54s1) pairs all electrons (d2sp3): no unpaired electron, μ = 0.
Teacher's Note: Cr(0) with CO is diamagnetic.
Exam Note: Show pairing of 3d6.
Question 57 (Previous Year Objective). The reaction of P4 with X leads selectively to P4O6. The X is: (IIT 2009)
(a) Dry O2
(b) A mixture of O2 and N2
(c) Moist O2
(d) O2 in the presence of aqueous NaOH
Solution. Answer: (b). P4 + 3O2 (from air) → P4O6; a rapid stream of air (not pure O2) is passed over phosphorus sticks. N2 present in air retards further oxidation of P4O6 to P4O10.
Teacher's Note: Limited oxygen gives P4O6.
Exam Note: Why pure O2 gives P4O10.
Question 58 (Previous Year Objective). The number of water molecule(s) directly bonded to the metal centre in CuSO4·5H2O is: (IIT 2009)
(a) 5
(b) 4
(c) 1
(d) 3
Solution. Answer: (b). [Cu(H2O)4]SO4·H2O: coordination number of Cu is four, so four water molecules are directly bonded to Cu.
Teacher's Note: One H2O is hydrogen bonded to sulphate.
Exam Note: Describe the fifth water molecule.
Question 59 (Previous Year Objective). The complex showing a spin only magnetic moment of 2.82 BM is: (IIT 2010)
(a) Ni(CO)4
(b) [NiCl4]2–
(c) Ni(PPh3)4
(d) [Ni(CN)4]2–
Solution. Answer: (b). Cl– is a weak ligand, so Ni2+ (3d8) keeps two unpaired electrons: μ = √(2 × 4) = √8 = 2.82 BM.
Teacher's Note: 2.82 BM means two unpaired electrons.
Exam Note: Use μ = √(n(n+2)).
Question 60 (Previous Year Objective). The ionisation isomer of [Cr(H2O)4(Cl)(NO2)]Cl is: (IIT 2010)
(a) [Cr(H2O)4(NO2)2]Cl2
(b) [Cr(H2O)4Cl2](NO2)
(c) [Cr(H2O)3(Cl)(ONO)]Cl
(d) [Cr(H2O)3Cl2(NO2)]H2O
Solution. Answer: (b). Cl– inside the sphere is replaced by NO2– in the ionisation sphere: [Cr(H2O)4Cl2]NO2.
Teacher's Note: Ionisation isomers swap inner and outer anions.
Exam Note: Swap Cl– and NO2–.
Question 61 (Previous Year Objective). Extra pure N2 can be obtained by heating: (IIT 2011)
(a) NH3 with CuO
(b) NH4NO3
(c) (NH4)2Cr2O7
(d) Ba(N3)2
Solution. Answer: (d). Except Ba(N3)2, the others give N2 mixed with other products; Ba(N3)2 → Ba + 3N2 gives extra pure N2 (NH4NO3 gives N2O).
Teacher's Note: Azide decomposition gives only N2.
Exam Note: Write the azide decomposition.
Question 62 (Previous Year Objective). Geometrical shapes of the complexes formed by the reaction of Ni2+ with Cl–, CN– and H2O respectively, are: (IIT 2011)
(a) Octahedral, tetrahedral and square planar
(b) Tetrahedral, square planar and octahedral
(c) Square planar, tetrahedral and octahedral
(d) Octahedral, square planar and octahedral
Solution. Answer: (b). Ni2+ is 3d8. In [NiCl4]2– (weak Cl–) sp3, tetrahedral; in [Ni(CN)4]2– (strong CN–) electrons pair, dsp2, square planar; in [Ni(H2O)6]2+ weak H2O gives sp3d2 octahedral.
Teacher's Note: Ligand strength decides geometry.
Exam Note: Give shape for each ligand.
Question 63 (Previous Year Objective). Oxidation state of the metal in the mineral haematite and magnetite respectively, are: (IIT 2011)
(a) II, III in haematite and III in magnetite
(b) II, III in haematite and II in magnetite
(c) II in haematite and II, III in magnetite
(d) III in haematite and II, III in magnetite
Solution. Answer: (d). Haematite is Fe2O3 (Fe is +3). Magnetite is Fe3O4 or FeO·Fe2O3, with Fe +2 (in FeO) and +3 (in Fe2O3).
Teacher's Note: Magnetite is mixed-valence Fe(II)/Fe(III).
Exam Note: Write Fe3O4 = FeO·Fe2O3.
Question 64 (Previous Year Objective). Among the following complexes (K–P): K3[Fe(CN)6] (K), [Co(NH3)6]Cl3 (L), Na3[Co(oxalate)3] (M), [Ni(H2O)6]Cl2 (N), K2[Pt(CN)4] (O) and [Zn(H2O)6](NO3)2 (P), the diamagnetic complexes are: (IIT 2011)
(a) K, L, M, N
(b) K, M, O, P
(c) L, M, O, P
(d) L, M, N, O
Solution. Answer: (c). L: Co3+ d6, strong NH3, all paired (d2sp3), diamagnetic. M: Co3+ d6, strong-field oxalate, all six electrons paired, diamagnetic. O: Pt2+ d8, strong CN–, dsp2, diamagnetic. P: Zn2+ d10, diamagnetic. K: Fe3+ d5 has one unpaired electron (paramagnetic); N: Ni2+ d8 with weak H2O has two unpaired electrons (paramagnetic).
Teacher's Note: Diamagnetic: no unpaired electrons.
Exam Note: Check d-count and ligand strength for each.
Question 65 (Previous Year Objective). Passing H2S gas into a mixture of Mn2+, Ni2+, Cu2+ and Hg2+ ions in an acidified aqueous solution precipitates: (IIT 2011)
(a) CuS and HgS
(b) MnS and CuS
(c) MnS and NiS
(d) NiS and HgS
Solution. Answer: (a). In presence of HCl, dissociation of H2S is suppressed (common-ion effect), so [S2–] is low. Ksp of CuS and HgS are low, so only they precipitate; MnS and NiS need higher [S2–] (alkaline medium).
Teacher's Note: Acidic H2S precipitates only the least-soluble sulphides.
Exam Note: Explain common-ion effect on S2–.
Question 66 (Previous Year Objective). As per IUPAC nomenclature, the name of the complex [Co(H2O)4(NH3)2]Cl3 is: (IIT 2012)
(a) Tetraaquadiaminecobalt (III) chloride
(b) Tetraaquadiamminecobalt (III) chloride
(c) Diaminetetraaquacobalt (III) chloride
(d) Diamminetetraaquacobalt (III) chloride
Solution. Answer: (d). Ligands are named alphabetically (ammine before aqua): diamminetetraaquacobalt(III) chloride.
Teacher's Note: Alphabetical order ignores multiplying prefixes.
Exam Note: Order ligands alphabetically.
Question 67 (Previous Year Objective). In the cyanide extraction process of silver from argentite ore, the oxidizing and reducing agents used are: (IIT 2012)
(a) O2 and CO respectively
(b) O2 and Zn dust respectively
(c) HNO3 and Zn dust respectively
(d) HNO3 and CO respectively
Solution. Answer: (b). Ag2S + 4NaCN → 2Na[Ag(CN)2] + Na2S; 4Na2S + 5[O2] + 2H2O → 2Na2SO4 + 4NaOH + 2S (oxidising agent O2); 2Na[Ag(CN)2] + Zn → Na2[Zn(CN)4] + 2Ag (reducing agent Zn).
Teacher's Note: Air removes Na2S; Zn displaces Ag.
Exam Note: Write the three steps.
Question 68 (Previous Year Objective). NiCl2{P(C2H5)2(C6H5)}2 exhibits temperature dependent magnetic behaviour (paramagnetic/diamagnetic). The coordination geometries of Ni2+ in the paramagnetic and diamagnetic states are respectively: (IIT 2012)
(a) tetrahedral and tetrahedral
(b) square planar and square planar
(c) tetrahedral and square planar
(d) square planar and tetrahedral
Solution. Answer: (c). Paramagnetic Ni2+ (two unpaired electrons) is sp3 tetrahedral; diamagnetic Ni2+ (no unpaired electron) is dsp2 square planar.
Teacher's Note: Pairing changes geometry and magnetism together.
Exam Note: Link geometry to unpaired electrons.
Question 69 (Previous Year Objective). The colour of light absorbed by an aqueous solution of CuSO4 is: (IIT 2012)
(a) orange-red
(b) blue-green
(c) yellow
(d) violet
Solution. Answer: (a). Aqueous CuSO4 absorbs orange-red light and shows the complementary colour, i.e. blue-green.
Teacher's Note: Colour seen is complementary to light absorbed.
Exam Note: State absorbed versus transmitted colour.
Question 70 (Previous Year Objective). The gas leaked from a storage tank of the Union Carbide plant in Bhopal gas tragedy was: [JEE (Main) 2013]
(a) Ammonia
(b) Phosgene
(c) Methylisocyanate
(d) Methylamine
Solution. Answer: (c). CH3–N=C=O (methyl isocyanate) was leaked.
Teacher's Note: MIC was produced from CH3NH2 + COCl2.
Exam Note: Write the MIC formula.
Question 71 (Previous Year Objective). Which of the following complex species is not expected to exhibit optical isomerism? [JEE (Main) 2013]
(a) [Co(NH3)3Cl3]
(b) [Co(en)(NH3)2Cl2]+
(c) [Co(en)3]3+
(d) [Co(en)2Cl2]+
Solution. Answer: (a). [Co(NH3)3Cl3] is of MA3B3 type and shows fac and mer isomers only; both have a mirror plane, so neither is optically active.
Teacher's Note: Check for a plane of symmetry.
Exam Note: Name fac and mer forms.
Question 72 (Previous Year Objective). Which of the following is the wrong statement? [JEE (Main) 2013]
(a) Ozone is violet-black in solid state
(b) Ozone is diamagnetic gas
(c) ONCl and ONO– are not isoelectronic
(d) O3 molecule is bent
Solution. Answer: (c). ONCl has 32 electrons whereas ONO– has 24, so they are indeed not isoelectronic; the printed key still marks (c) as the answer. Answer (c) as printed (flagged for human check). O3 is violet-black solid, diamagnetic and bent.
Teacher's Note: Isoelectronic species have equal electron counts.
Exam Note: Count total electrons.
Question 73 (Previous Year Objective). Which of the following arrangements does not represent the correct order of the property stated against it? [JEE (Main) 2013]
(a) Co3+ < Fe3+ < Cr3+ < Sc3+: stability in aqueous solution
(b) Sc < Ti < Cr < Mn: number of oxidation states
(c) V2+ < Cr2+ < Mn2+ < Fe2+: paramagnetic behaviour
(d) Ni2+ < Co2+ < Fe2+ < Mn2+: ionic size
Solution. Answer: (c). Unpaired electrons: V2+ 3, Cr2+ 4, Mn2+ 5, Fe2+ 4, so the correct order is V2+ < Cr2+ = Fe2+ < Mn2+; (c) is wrong. Other orders are right (Sc3+ is noble-gas like, Fe3+ half-filled; Mn shows +2 to +7; ionic sizes Ni2+ 0.72 Å to Mn2+ 0.80 Å).
Teacher's Note: Paramagnetism follows unpaired electron count.
Exam Note: Count unpaired electrons.
Question 74 (Previous Year Objective). Consider the following complex ions, P, Q and R. P = [FeF6]3–, Q = [V(H2O)6]2+ and R = [Fe(H2O)6]2+. The correct order of the complex ions, according to their spin only magnetic moment values (in B.M.) is: [JEE (Advanced) I 2013]
(a) R < Q < P
(b) Q < R < P
(c) R < P < Q
(d) Q < P < R
Solution. Answer: (b). P: Fe3+ d5, weak F–, 5 unpaired, μ = √35 = 5.92 BM. Q: V2+ d3, 3 unpaired, μ = √15 = 3.87 BM. R: Fe2+ d6, weak H2O, 4 unpaired, μ = √24 = 4.90 BM. Hence Q < R < P.
Teacher's Note: Higher unpaired electrons means higher μ.
Exam Note: Compute μ for each ion.
Question 75 (Previous Year Objective). Sulphide ores are common for the metals: [JEE (Advanced) I 2013]
(a) Ag, Cu and Pb
(b) Ag, Cu and Sn
(c) Ag, Mg and Pb
(d) Al, Cu and Pb
Solution. Answer: (a). Metals with high polarising power (Zeff) occur as ores with highly polarisable anions: Ag, Cu, Pb → sulphide ores (Ag2S, CuFeS2, PbS); Sn → oxide ore (SnO2); Mg → sea water and dolomite; Al → oxide ore (Al2O3·2H2O).
Teacher's Note: Soft metal cations pair with sulphide.
Exam Note: Name one ore for each metal.
Question 76 (Previous Year Objective). Concentrated nitric acid, upon long standing, turns yellow-brown due to the formation of: [JEE (Advanced) I 2013]
(a) NO
(b) NO2
(c) N2O
(d) N2O4
Solution. Answer: (b). On standing, HNO3 decomposes to liberate yellow-brown NO2, which dissolves in HNO3 to impart the brown colour: 4HNO3 → 2H2O + 4NO2 + O2.
Teacher's Note: Light decomposes HNO3 to NO2.
Exam Note: Write the decomposition.
Question 77 (Previous Year Objective). Upon treatment with ammoniacal H2S, the metal ion that precipitates as a sulphide is: [JEE (Advanced) I 2013]
(a) Fe(III)
(b) Al(III)
(c) Mg(II)
(d) Zn(II)
Solution. Answer: (d). In analytical chemistry, group II and IV metals are precipitated as sulphides, whereas group III metals (Fe, Al, Cr) precipitate as hydroxides: Fe(III) and Al(III) are group III, Mg(II) is group V, and Zn(II) (group IV) precipitates as ZnS.
Teacher's Note: Group IV uses ammoniacal H2S.
Exam Note: Name the groups of Fe, Al, Zn, Mg.
Objective Problems (More Than One Answer Correct)
Question 1 (More Than One Answer Correct). Which are correct for C60 form of carbon and other crystalline forms like C50?
(a) It is a crystalline state of carbon
(b) It has 20 hexagons and 12 pentagons having a truncated icosahedron (soccer ball) structure
(c) It is known as buckminsterfullerene
(d) Other crystalline forms of C such as C50, etc., have also been discovered
Solution. Answer: (a), (b), (c), (d). These are facts about fullerenes.
Teacher's Note: C60 has 20 hexagons and 12 pentagons.
Exam Note: Recall the structure of buckminsterfullerene.
Question 2 (More Than One Answer Correct). Which are correct for the CNT form of carbon?
(a) It is a crystalline state of carbon
(b) It has 20 hexagons and 5 pentagons structure and is called carbon nanotube
(c) It is 100 times stronger than steel
(d) The size of carbon atoms in CNT ranges from 1–10 nm
Solution. Answer: (a), (c), (d). Statements (a), (c) and (d) are correct (key: "same as above"); (b) is wrong because a carbon nanotube is a rolled graphene sheet of hexagons, not a 20-hexagon, 5-pentagon structure.
Teacher's Note: CNT = rolled sheet of hexagonal rings.
Exam Note: Distinguish CNT and C60.
Question 3 (More Than One Answer Correct). Which of the following are correct statements?
(a) A reaction between an oxidant and a reductant gives a compound of lower oxidation state if reductant is in excess
(b) A reaction between an oxidant and a reductant gives a compound of higher oxidation state if oxidant is in excess
(c) A reaction between an oxidant and a reductant gives a compound of lower oxidation state if oxidant is in excess
(d) A reaction between an oxidant and a reductant gives a compound of higher oxidation state if reductant is in excess
Solution. Answer: (a), (b), (c), (d). The key accepts all four (printed: all are facts). Example: Cl2 + 2NaOH → NaCl + NaClO + H2O and 3Cl2 + 6NaOH → 5NaCl + NaClO3 + 3H2O show the product oxidation state depends on the reagent ratio. Answer as printed.
Teacher's Note: Product state depends on which reagent is in excess.
Exam Note: Illustrate with chlorine and NaOH.
Question 4 (More Than One Answer Correct). Which of the following are amphoteric oxides?
(a) Na2O
(b) BaO
(c) Al2O3
(d) ZnO
Solution. Answer: (c), (d). ZnO, Al2O3, BeO, SnO2 and As2O3 are amphoteric; alkali and alkaline earth metal oxides (except BeO) are strong bases.
Teacher's Note: Amphoteric: ZnO, Al2O3, BeO, SnO2, PbO.
Exam Note: List amphoteric oxides.
Question 5 (More Than One Answer Correct). Which of the following are acidic oxides?
(a) CO2
(b) P2O3
(c) Mn2O7
(d) CrO3
Solution. Answer: (a), (b), (c), (d). Non-metal oxides (NO2, N2O3, N2O5, CO2, P2O3, P2O5, etc.) are acidic; Mn2O7 and CrO3 are acidic oxides although most metal oxides are basic or amphoteric.
Teacher's Note: High-oxidation-state metal oxides are acidic.
Exam Note: Mention Mn2O7, CrO3.
Question 6 (More Than One Answer Correct). Select the neutral oxides:
(a) H2O
(b) CO2
(c) NO
(d) N2O
Solution. Answer: (a), (c), (d). CO2 is acidic but CO is neutral; H2O, NO and N2O are neutral.
Teacher's Note: Neutral oxides: H2O, CO, NO, N2O.
Exam Note: Name four neutral oxides.
Question 7 (More Than One Answer Correct). Which of the followings are named after the names of planets and are radioactive?
(a) Np
(b) Pu
(c) Po
(d) Fr
Solution. Answer: (a), (b). Np is neptunium (Neptune) and Pu is plutonium (Pluto); Po and Fr are named after Poland and France.
Teacher's Note: Planet-named elements: U, Np, Pu.
Exam Note: Recall naming origins.
Question 8 (More Than One Answer Correct). Which properties are correctly matched?
(a) Ionisation energy: N > O and N+ < O+
(b) Electron affinity: N < O and N– < O–
(c) Atomic radius: Ne > F and Al ≈ Ga
(d) Electron affinity: Cl > F and S > O
Solution. Answer: (a), (b), (c), (d). All follow the text: half-filled N has higher IE but N+ < O+; EA N < O; Ne (van der Waals) > F, Al ≈ Ga (d-block contraction); Cl > F and S > O (small-size repulsion). Answer as printed.
Teacher's Note: Small-atom repulsion lowers EA of F and O.
Exam Note: Explain Cl > F, S > O.
Question 9 (More Than One Answer Correct). In which bond angles are correctly matched?
(a) PI3 > AsI3 > SbI3
(b) NH3 > PH3 > AsH3
(c) PF3 > PCl3 < PBr3 < PI3
(d) NO2+ > NO2 > NO2–
Solution. Answer: (a), (b), (c), (d). Known angles: NH3 106°51′, PH3 93.5°, AsH3 91.5°; PF3 102°, PCl3 100°, PBr3 101.5°, PI3 102°; NO2+ 180°, NO2 134°, NO2– 115°. (In PF3 back bonding keeps the angle large; N–O repulsion order b.p.–b.p. < b.p.–l.p. explains NO2.)
Teacher's Note: Use bond-angle data and electronegativity trends.
Exam Note: Quote angles for each species.
Question 10 (More Than One Answer Correct). Which of the following statements are correct?
(a) PF3 acts as electron pair donor
(b) Electron pair donor tendency of NF3 is lesser than PF3
(c) SbF5 acts as electron pair acceptor
(d) SbCl3 on dissolving in water gives Sb(OH)3
Solution. Answer: (a), (b), (c). PF3 donates to metals (Ni(CO)4 + 4PF3 → Ni(PF3)4 + 4CO), NF3 donates less due to small N–F size; SbF5 + 2F– → [SbF6]–; SbCl3 + H2O → SbOCl + 2HCl, not Sb(OH)3.
Teacher's Note: Sb and Bi chlorides hydrolyse to oxychlorides.
Exam Note: Write the SbCl3 hydrolysis.
Question 11 (More Than One Answer Correct). Select the correct statements:
(a) CO2 and N3– are isoelectronic
(b) CO2 and N3– are isostructural
(c) Both have bond order equal to two
(d) Both have two σ and two π bonds and show sp-hybridisation
Solution. Answer: (a), (b), (c), (d). O=C=O and [N=N=N]– are both linear (sp) and have 22 electrons.
Teacher's Note: Same electron count and same linear shape.
Exam Note: Count 22 electrons each.
Question 12 (More Than One Answer Correct). Which of the following in each has more polarising nature?
(a) Fe3+ > Fe2+
(b) Mn2+ > Mn7+
(c) Sn4+ > Sn2+
(d) V4+ > V3+
Solution. Answer: (a), (c), (d). Corrected: the printed key gives (a,b,c), arguing that a noble-gas-core ion is less polarising, but Mn7+ (charge +7, very small) is far more polarising than Mn2+ (Mn2O7 is covalent). For the same metal, a higher charge means more polarising power, so (a), (c) and (d) are correct and (b) is wrong.
Teacher's Note: Polarising power rises with charge and falls with size.
Exam Note: Apply Fajans' rules.
Question 13 (More Than One Answer Correct). Which of the following do not give NH3 on heating?
(a) NH4NO3
(b) (NH4)2Cr2O7
(c) NH4Cl
(d) (NH4)2SO4
Solution. Answer: (a), (b). NH4NO3 → N2O + 2H2O and (NH4)2Cr2O7 → N2 + Cr2O3 + 4H2O (anion oxidises NH4+); NH4Cl and (NH4)2SO4 give NH3.
Teacher's Note: Oxidising anions destroy NH4+.
Exam Note: Write both decompositions.
Question 14 (More Than One Answer Correct). Shielding constant Ne is equal to 4.15. Which of the following have same shielding constant?
(a) Na
(b) Na+
(c) F
(d) F–
Solution. Answer: (b), (d). Na+ and F– have the same 1s22s22p6 configuration as Ne, so the same shielding constant.
Teacher's Note: Isoelectronic species share shielding constant.
Exam Note: Write the configuration of Ne.
Question 15 (More Than One Answer Correct). Select the correct statements:
(a) All of the halogens are oxidised in O2
(b) BiCl5 does not exist
(c) Pb4+ salts are better oxidants than Ge4+ salts
(d) EA1 for Zn is +ve whereas for Cu it is –ve
Solution. Answer: (b), (c), (d). F2 is reduced, not oxidised, in O2 compounds, so (a) is wrong; Bi5+ is not possible due to inert-pair effect; stability order Pb4+ < Ge4+; Zn has a completely filled 3d104s2 (EA positive) while Cu (3d104s1) can accept an electron.
Teacher's Note: Inert pair effect weakens higher states down the group.
Exam Note: Explain Bi(V) and Pb(IV).
Question 16 (More Than One Answer Correct). Select the incorrect reactions:
(a) CH3I + H2O → CH3OH + HI
(b) CF3I + H2O → CF3OH + HI
(c) SbCl3 + 3H2O → Sb(OH)3 + 3HCl
(d) PCl3 + 3H2O → P(OH)3 + 3HCl
Solution. Answer: (b), (c). [CF3]δ–Iδ+ + H2O → CF3H + IOH; SbCl3 + H2O → SbOCl + 2HCl.
Teacher's Note: Polarity of C–I is reversed in CF3I.
Exam Note: Write the correct products.
Question 17 (More Than One Answer Correct). Select the correct reactions:
(a) SiO2 + 2Mg → Si + 2MgO
(b) Si + 2MgO →(1000 °C) SiO2 + 2Mg
(c) SiO2 + CaO → CaSiO3
(d) HgS + Fe → FeS + Hg
Solution. Answer: (a), (b), (c), (d). All are used in extraction of metals (printed key). Answer as printed.
Teacher's Note: Redox and slag reactions.
Exam Note: Identify each reaction type.
Question 18 (More Than One Answer Correct). Which are not used to prepare H2 by the action over Zn?
(a) Conc. H2SO4
(b) Conc. HCl
(c) Dil. H2SO4
(d) HNO3
Solution. Answer: (a), (b), (d). Conc. H2SO4 and HNO3 oxidise H2; conc. HCl forms a coating of ZnCl2 over Zn so the reaction stops after a little time; dil. H2SO4 gives Zn + H2SO4 → ZnSO4 + H2.
Teacher's Note: Oxidising acids do not liberate H2.
Exam Note: Contrast conc. and dil. H2SO4.
Question 19 (More Than One Answer Correct). Addition of which salt in substantial amount will cause hardness in water?
(a) Th(NO3)4
(b) Ca(NO3)2
(c) Mg(NO3)2
(d) La(NO3)3
Solution. Answer: (a), (b), (c), (d). All these cations form insoluble salts with soap, (RCOO)xM.
Teacher's Note: Any polyvalent cation precipitates soap.
Exam Note: Explain soap precipitation.
Question 20 (More Than One Answer Correct). Which of the following forms alums?
(a) Li+
(b) Na+
(c) Al3+
(d) Cr3+
Solution. Answer: (b), (c), (d). Alum is M2(SO4)·M′2(SO4)3·24H2O. Li does not form alum as it cannot co-ordinate 6H2O due to its small size of Li+; Na+ (monovalent) and Al3+, Cr3+ (trivalent) do.
Teacher's Note: Alum needs one M+ and one M3+.
Exam Note: Why Li+ is too small.
Question 21 (More Than One Answer Correct). Select the correct reactions:
(a) KF + BrF3 → K[BrF4]
(b) 4KO2 + 4CO2 + 2H2O → 4KHCO3 + 3O2
(c) 2NaNO3 →(500 °C) 2NaNO2 + O2
(d) 4NaNO3 →(800 °C) 2Na2O + 5O2 + 2N2
Solution. Answer: (a), (b), (c), (d). All occur as shown (printed key).
Teacher's Note: Temperature decides NaNO3 products.
Exam Note: Note nitrite at 500 °C, oxide at 800 °C.
Question 22 (More Than One Answer Correct). Which one are correctly represented?
(a) Ag2S2O3—white
(b) Fe2(S2O3)3—violet
(c) Cu2S2O3—white
(d) Ag2S—white
Solution. Answer: (a), (b), (c). Ag2S is black, so (d) is wrong; Ag2S2O3 is white, Fe2(S2O3)3 violet and Cu2S2O3 white.
Teacher's Note: Ag2S is black.
Exam Note: Recall thiosulphate colours.
Question 23 (More Than One Answer Correct). Which are correct for the reaction M+ → M+(aq.)?
(a) ΔG = –ve
(b) ΔH = –ve
(c) ΔS = –ve
(d) ΔS = +ve
Solution. Answer: (a), (b), (c). Hydration of an ion is spontaneous and exothermic; randomness decreases (ordering of water), so ΔG and ΔH are negative and ΔS is negative.
Teacher's Note: Hydration orders water molecules.
Exam Note: Explain sign of ΔS.
Question 24 (More Than One Answer Correct). The metal bicarbonates which do not exist in solid state are:
(a) LiHCO3
(b) Ca(HCO3)2
(c) Zn(HCO3)2
(d) Ag(HCO3)
Solution. Answer: (a), (b), (c), (d). Corrected: the printed key gives (b,c,d), but only Na to Cs bicarbonates exist in the solid state; LiHCO3 too exists only in solution. So all four do not exist as solids.
Teacher's Note: Small Li+ polarises HCO3–.
Exam Note: Only Na–Cs bicarbonates are solid.
Question 25 (More Than One Answer Correct). Which orders are correctly matched?
(a) Solubility in water: BaF2 < MgF2 < BeF2
(b) Hydrolysis nature: CaCl2 < MgCl2 < BeCl2
(c) Covalent nature: CaCl2 > MgCl2 > BeCl2
(d) Lattice energy: BaF2 < CaF2 < MgF2
Solution. Answer: (a), (b), (d). Covalent nature is CaCl2 < MgCl2 < BeCl2, so (c) is wrong. The fluorides get more soluble as lattice energy rises less than hydration energy, BeCl2 hydrolyses most, and lattice energy increases with smaller cation size.
Teacher's Note: Be and Mg are small and polarising.
Exam Note: Apply Fajans' rules.
Question 26 (More Than One Answer Correct). An element (A) burns in N2 to give ionic compound (B). Compound (B) reacts with water to give (C) and (D). Solution of (C) becomes milky on boiling CO2. Element (A) may be:
(a) Ca
(b) Mg
(c) Ba
(d) Be
Solution. Answer: (a), (c). 3M + N2 → M3N2 (B); M3N2 + 6H2O → 3M(OH)2 (C) + 2NH3 (D); M(OH)2 + CO2 → MCO3↓ + H2O (milky). Mg(OH)2 and Be(OH)2 are insoluble, so only Ca and Ba qualify.
Teacher's Note: Lime-water test needs soluble hydroxide.
Exam Note: Test for dissolved Ca(OH)2.
Question 27 (More Than One Answer Correct). Which of the followings are pseudo alums?
(a) MnSO4·Al2(SO4)3·24H2O
(b) FeSO4·Al2(SO4)3·24H2O
(c) (NH4)2SO4·Fe2(SO4)3·24H2O
(d) K2SO4·Al2(SO4)3·24H2O
Solution. Answer: (a), (b). Alums are M′2SO4·M″2(SO4)3·24H2O; if M′ is bivalent (Mn2+, Fe2+), it is a pseudo alum.
Teacher's Note: Pseudo alum has a divalent cation in place of M+.
Exam Note: Distinguish alum and pseudo alum.
Question 28 (More Than One Answer Correct). Select the correct statements about B(OH)3:
(a) It is a weak Bronsted base
(b) It is a weak Lewis acid
(c) It's acidic nature increases in presence of diols
(d) It's basic nature increases in presence of diols
Solution. Answer: (b), (c). B(OH)3 is boric acid, a weak monobasic Lewis acid: B(OH)3 + H2O ⇌ [B(OH)4]– + H+; with diols (1 : 1 complex) the chelate forms, which removes [B(OH)4]– and raises acidity.
Teacher's Note: Boric acid acts as Lewis, not Brønsted, acid.
Exam Note: Write the ionisation.
Question 29 (More Than One Answer Correct). Which of the following are slippery solids?
(a) Boron nitride
(b) Graphite
(c) Carborundum
(d) Diamond
Solution. Answer: (a), (b). Boron nitride (white graphite) and graphite both have sheet-like (layered) structures and are slippery.
Teacher's Note: Layered lattices slip.
Exam Note: Compare with diamond.
Question 30 (More Than One Answer Correct). Which are correct about diborane structure?
(a) Boron is approximately sp3-hybridised
(b) There are two terminal B–H bonds on each boron atom
(c) There are only 12 bonding electrons
(d) It has one 3 centred banana bond (3C–2e bond)
Solution. Answer: (a), (b), (c), (d). Answer as printed. B2H6 has four terminal B–H bonds (2 per B, 8 electrons) and bridging 3c–2e banana bonds (4 electrons), 12 bonding electrons in all, with sp3 boron. (Strictly, (d) holds for each bridge: there are two such 3c–2e bonds; flagged.)
Teacher's Note: 12 electrons: 8 in terminal bonds, 4 in bridges.
Exam Note: Count electrons for terminal and bridge bonds.
Question 31 (More Than One Answer Correct). Select the correct statement about CO:
(a) It acts as Lewis acid in formation of carbonyls
(b) It is a neutral oxide of carbon
(c) It reacts with NaOH at high P, T to give HCOONa
(d) It acts as π acceptor by accepting electron from central metal during complex formation
Solution. Answer: (b), (c), (d). These are facts: CO is neutral, gives sodium formate with NaOH under pressure, and is a π acceptor ligand (back bonding). It acts as a σ donor (Lewis base), not Lewis acid, so (a) is wrong.
Teacher's Note: CO donates σ and accepts π electrons.
Exam Note: Describe synergic bonding.
Question 32 (More Than One Answer Correct). Which are correct about P4S3?
(a) P is trivalent and S is divalent
(b) It has structure (cage with three S bridges)
(c) Average oxidation number of P and S are +3/2 and –2 respectively
(d) It is used in match industry
Solution. Answer: (a), (b), (c), (d). One P has +3 oxidation number and 3P have +1: average = (1 × 3 + 3 × 1)/4 → +6/4 = +3/2. P4S3 has a P4 tetrahedron with three P–S–P bridges and is used in match industry (figure: P4 cage with three S atoms).
Teacher's Note: Three P–P bonds replaced by P–S–P links.
Exam Note: Describe the cage structure.
Question 33 (More Than One Answer Correct). Select the correct statements:
(a) NF3 and NCl3 are exothermic compounds
(b) NF3 and NCl3 are endothermic compounds
(c) NF3 is exothermic compound
(d) NCl3 is endothermic compound
Solution. Answer: (c), (d). ½N2 + 3/2 F2 → NF3, ΔHf = –109 kJ; ½N2 + 3/2 Cl2 → NCl3, ΔHf = +230 kJ. N–F bond energy > F–F bond energy; N–Cl bond energy < Cl–Cl bond energy.
Teacher's Note: Bond energy comparison fixes sign of ΔHf.
Exam Note: Compare N–X with X–X energy.
Question 34 (More Than One Answer Correct). Which of the following are known?
(a) SO2F2
(b) SO2Cl2
(c) SO2FBr
(d) SO2I2
Solution. Answer: (a), (b), (c). SO2Br2 and SO2I2 are unstable and not known; SO2F2, SO2Cl2 and SO2FBr are known.
Teacher's Note: Larger halides destabilise sulphuryl halides.
Exam Note: Name unstable sulphuryl halides.
Question 35 (More Than One Answer Correct). Which are the characteristics of S4N4?
(a) It has S–S weak bonds
(b) It is thermochromic
(c) It has a cage structure
(d) It detonates on shock, grinding or sudden heating
Solution. Answer: (a), (b), (c), (d). All are facts about S4N4.
Teacher's Note: S4N4 is a cage with weak S–S bonds.
Exam Note: Recall thermochromism of S4N4.
Question 36 (More Than One Answer Correct). Cyclic trimer of SO3 has:
(a) 4 (S=O) bonds
(b) 3 (S–O–S) bonds
(c) one (S–S) bond
(d) 6 (S–O) bonds
Solution. Answer: (b), (d). Corrected: the printed key gives (a,b,d), but the cyclic trimer (SO3)3 is a six-membered ring of three S and three bridging O atoms, with two S=O on each S, i.e. 6 S=O bonds (not 4), 3 S–O–S bridges and 6 S–O single bonds, and no S–S bond. So (b) and (d) are correct.
Teacher's Note: Count bonds in the S3O3 ring.
Exam Note: Draw ring with 6 exocyclic S=O.
Question 37 (More Than One Answer Correct). Which of the following halogen oxides are known?
(a) F2O
(b) Cl2O7
(c) Cl2O5
(d) I2O7
Solution. Answer: (a), (b). Cl2O5 and I2O7 are not known. OF2 is oxygen difluoride (F2O is known) and Cl2O7 is known.
Teacher's Note: Known: Cl2O, ClO2, Cl2O6, Cl2O7, I2O5.
Exam Note: List known chlorine oxides.
Question 38 (More Than One Answer Correct). Which of the halogen acids have pKa values –ve?
(a) HF
(b) HCl
(c) HBr
(d) HI
Solution. Answer: (b), (c), (d). pKa for HF, HCl, HBr and HI are 3, –7, –9, –10 respectively.
Teacher's Note: Strong acids have negative pKa.
Exam Note: Quote the four pKa values.
Question 39 (More Than One Answer Correct). Which of the following are ionic compounds?
(a) I(CH3COO)3
(b) I(IO3)3
(c) IPO4
(d) ICl3
Solution. Answer: (a), (b), (c). I3+ and the anions CH3COO–, IO3–, PO43– make ionic compounds; ICl3 is covalent.
Teacher's Note: Iodine shows cationic character with oxyanions.
Exam Note: Identify I3+ salts.
Question 40 (More Than One Answer Correct). Which of the following are correctly matched?
(a) XeOF4: sp3d2, square pyramidal
(b) XeOF2: sp3d, T-shaped
(c) XeO3: sp3, Trigonal pyramid
(d) XeO2F2: sp3d, See-saw
Solution. Answer: (a), (b), (c), (d). All are facts: XeOF4 (5 bond pairs + 1 lone pair) sp3d2; XeOF2 (3 + 2) sp3d T-shaped; XeO3 (3 + 1) sp3; XeO2F2 (4 + 1) sp3d see-saw.
Teacher's Note: Count bond pairs and lone pairs on Xe.
Exam Note: Give steric numbers.
Question 41 (More Than One Answer Correct). Which of the following are correct for liquid He?
(a) He (liq.) exists in two forms He (I) and He (II)
(b) He (II) is called superfluid. It is a low conducting and high surface tension liquid
(c) He (I) is used for cryogenic applications
(d) He (I) on cooling at 2.19 K and 38 mm pressure changes to He (II)
Solution. Answer: (a), (b), (c), (d). All are facts (printed key), including the superfluid transition of He(I) to He(II) at 2.19 K (the lambda point).
Teacher's Note: He(II) is the superfluid phase below 2.19 K.
Exam Note: Recall the lambda point.
Question 42 (More Than One Answer Correct). Select the correct statements:
(a) [Co(NH3)6]2+ is readily oxidised to [Co(NH3)6]3+
(b) Co2+ is very stable and difficult to oxidise
(c) Ni2+ compounds are more stable than Pt2+
(d) Ni4+ compounds are less stable than Pt4+
Solution. Answer: (a), (b), (c), (d). Printed key: "do" (all facts, as in Q37 above): ammines stabilise Co(III); simple Co2+ is stable; Ni(II) is more stable than Pt(II) and Ni(IV) less stable than Pt(IV) (down the group higher states become more stable).
Teacher's Note: Higher oxidation states stabilise down a d-block group.
Exam Note: Compare 3d and 5d members.
Question 43 (More Than One Answer Correct). CN– acts as:
(a) reducing agent
(b) oxidising agent
(c) complexing agent
(d) ligand
Solution. Answer: (a), (c), (d). CN– does not act as an oxidant; it is a reductant, a complexing agent and a ligand.
Teacher's Note: CN– resembles halide ions.
Exam Note: Classify CN– roles.
Question 44 (More Than One Answer Correct). A square planar complex involves:
(a) s-orbitals
(b) px-orbitals
(c) dz²-orbitals
(d) dx²–y²-orbitals
Solution. Answer: (a), (b), (d). Square planar (dsp2) involves s, px, py and dx²–y² orbitals.
Teacher's Note: dsp2 uses the d orbital pointing along the axes.
Exam Note: Name the four orbitals.
Question 45 (More Than One Answer Correct). Which of the following have EAN equal to next inert gas?
(a) Fe(CO)5
(b) Co2(CO)8
(c) H2Cr(CO)5
(d) Cr(NH3)6Cl3
Solution. Answer: (a), (b), (c). Carbonyls obey EAN (Fe: 26 + 10 = 36). EAN of Cr in Cr(NH3)6Cl3 = 24 – 3 + (2 × 6) = 33, not 36.
Teacher's Note: Carbonyls and hydrides reach noble-gas EAN.
Exam Note: Calculate EAN for each.
Question 46 (More Than One Answer Correct). Which of the following are used in preparing iodised salt?
(a) KIO3
(b) KI
(c) I2
(d) HI
Solution. Answer: (a), (b). It is a fact: KIO3 and KI are added to common salt.
Teacher's Note: KI or KIO3 supplies iodine.
Exam Note: Name the compounds.
Question 47 (More Than One Answer Correct). The chemicals used in preparation of MIC, i.e., methyl isocyanate component of Bhopal gas tragedy are:
(a) CH3NH2
(b) COCl2
(c) PH3
(d) (CH3)2NH
Solution. Answer: (a), (b). CH3NH2 + COCl2 → CH3N=C=O (MIC) + 2HCl.
Teacher's Note: MIC is made from methylamine and phosgene.
Exam Note: Write the equation.
Question 48 (More Than One Answer Correct). NaNO3 decomposes above 800 °C to give:
(a) N2
(b) O2
(c) NO2
(d) Na2O
Solution. Answer: (a), (b), (d). NaNO3 →(heat) NaNO2 + ½O2; above 800 °C: 2NaNO3 → Na2O + N2 + 5/2 O2.
Teacher's Note: Temperature dependent decomposition.
Exam Note: Balance the high-temperature equation.
Question 49 (More Than One Answer Correct). Addition of high proportions of Mn makes steel useful in making rails of rail roads because manganese:
(a) gives hardness to steel
(b) helps the formation of oxides of iron
(c) can remove oxygen and sulphur
(d) can show highest oxidation state of +7
Solution. Answer: (a), (c), (d). Manganese imparts hardness to steel and removes oxygen and sulphur by forming slag as MnSiO3: Fe2O3 + 3Mn → 3MnO + 2Fe; MnO + SiO2 → MnSiO3. Answer (a,c,d) as printed.
Teacher's Note: Mn is a deoxidiser and desulphuriser.
Exam Note: Write the slag reaction.
Question 50 (More Than One Answer Correct). Which of the following statements are correct when a mixture of NaCl and K2Cr2O7 is gently warmed with conc. H2SO4?
(a) Deep red vapours are evolved
(b) Cl2 gas is evolved
(c) Chromyl chloride is formed
(d) Evolved vapours on passing in NaOH give yellow solution of Na2CrO4
Solution. Answer: (a), (c), (d). This is the chromyl chloride test: K2Cr2O7 + 4NaCl + 3H2SO4 → K2SO4 + 2CrO2Cl2 + 2Na2SO4 + 3H2O; the red vapours dissolve in NaOH to give yellow Na2CrO4. No Cl2 is evolved.
Teacher's Note: Chromyl chloride test confirms Cl–.
Exam Note: Write the CrO2Cl2 equation.
Question 51 (More Than One Answer Correct). Which of the following are coloured?
(a) Ti(NO3)4
(b) [Cu(NC·CH3)4]+ BF4–
(c) [Cr(NH3)6]Cl3
(d) K3[VF6]
Solution. Answer: (c), (d). Cu+ (d10) and Ti4+ (d0) have no unpaired electron, thus are colourless; Cr3+ (d3) and V3+ (d2) are coloured.
Teacher's Note: Colour needs partly filled d-subshell.
Exam Note: Check d-configuration.
Question 52 (More Than One Answer Correct). Nitrogen (I) oxide is produced by:
(a) thermal decomposition of NH4NO3
(b) disproportionation of N2O4
(c) thermal decomposition of NH4NO2
(d) interaction of hydroxyl amine and HNO2
Solution. Answer: (a), (d). NH4NO3 → N2O + 2H2O; NH2OH·HCl + NaNO2 → NaCl + 2H2O + N2O. NH4NO2 gives N2.
Teacher's Note: N2O has N in +1 state.
Exam Note: Write both equations.
Question 53 (More Than One Answer Correct). When zeolite (a hydrated sodium aluminium silicate) is treated with hard water, the sodium ions are exchanged with:
(a) H+ ions
(b) Ca2+ ions
(c) SO42– ions
(d) Mg2+ ions
Solution. Answer: (b), (d). Na2Z + Ca2+ → CaZ + 2Na+; Ca2+ and Mg2+ ions are exchanged.
Teacher's Note: Zeolite exchanges hardness cations.
Exam Note: Write the exchange equation.
Question 54 (More Than One Answer Correct). The materials used in solar cell are:
(a) Cs
(b) Si
(c) Sn
(d) Ti
Solution. Answer: (a), (b). Corrected: the printed key gives only (a) Cs (photoelectric cells use caesium), but silicon is the principal material of solar (photovoltaic) cells, so (a,b) are acceptable; Sn and Ti are not used.
Teacher's Note: Silicon is the standard photovoltaic semiconductor.
Exam Note: Name the semiconductor used.
Question 55 (More Than One Answer Correct). Highly pure dilute solution of Na in liquid NH3:
(a) shows blue colour
(b) exhibits electrical conductivity
(c) produces sodium amide
(d) produces H2 gas
Solution. Answer: (a), (b). Na + (x + y)NH3(l) → [Na(NH3)x]+ + [e(NH3)y]–: solvated electrons give the blue colour and the conductivity. Sodium amide and H2 form only on standing or with a catalyst.
Teacher's Note: Pure dilute solution is stable and blue.
Exam Note: Name the coloured species.
Question 56 (More Than One Answer Correct). White phosphorus (P4) has:
(a) six P–P single bonds
(b) four P–P single bonds
(c) four lone pairs of electron
(d) PPP bond angle of 60°
Solution. Answer: (a), (c), (d). P4 is a tetrahedron with six P–P single bonds, a lone pair on each P (four in all) and P–P–P angle of 60°.
Teacher's Note: Tetrahedron has 6 edges and 4 corners.
Exam Note: Count bonds and lone pairs.
Question 57 (More Than One Answer Correct). NH3 on reaction with hypochlorite ion, can form:
(a) NO
(b) NH4Cl
(c) N2H4
(d) HNO2
Solution. Answer: (c). 2NH3 + OCl– → N2H4 + H2O + Cl– (Raschig process).
Teacher's Note: Raschig synthesis of hydrazine.
Exam Note: Write the equation.
Question 58 (More Than One Answer Correct). Which of the following alloys contains Cu and Zn:
(a) Bronze
(b) Brass
(c) Gun metal
(d) Type metal
Solution. Answer: (b), (c). Bronze: Cu + Sn (90 % + 10 %); Brass: Cu + Zn; Gun metal: Cu 88 %, Sn 8–10 %, Zn 2–4 %; Type metal: Pb 60 %, Sn 30 %, Sb 10 %.
Teacher's Note: Brass and gun metal both contain zinc.
Exam Note: Give composition of each alloy.
Question 59 (More Than One Answer Correct). The aqueous solution of which salts are coloured:
(a) Co(NO3)2
(b) CrCl3
(c) Zn(NO3)2
(d) CaCl2
Solution. Answer: (a), (b). Co2+ and Cr3+ have unpaired d electrons and are coloured; Zn2+ (d10) and Ca2+ (noble-gas core) are colourless.
Teacher's Note: No unpaired electron, no colour.
Exam Note: Check d-configuration.
Question 60 (More Than One Answer Correct). Potassium manganate (K2MnO4) is formed when:
(a) Cl2 is passed in KMnO4 aq.
(b) MnO2 is fused with KOH in air
(c) HCHO reacts with KMnO4 in presence of strong alkali
(d) KMnO4 reacts with conc. H2SO4
Solution. Answer: (b), (c). 2KOH + MnO2 + O2 → K2MnO4 + H2O; HCHO + 2KMnO4 + 2KOH → K2MnO4 + H2O + HCOOH (balanced as in key: 2K2MnO4 + H2O + HCOOK).
Teacher's Note: Alkaline medium reduces MnO4– to MnO42–.
Exam Note: Name the green product.
Question 61 (More Than One Answer Correct). The statements that are true for the long form of the periodic table are:
(a) It reflects the sequence of filling the electrons in the order of sub-energy level s, p, d and f
(b) It helps to predict the stable valency states of the elements
(c) It reflects trends in physical and chemical properties of the elements
(d) It helps to predict the relative ionicity of the bond between any two elements
Solution. Answer: (a), (b), (c), (d). In the long form, elements are arranged in increasing order of atomic number (i.e. electronic configuration); physical and chemical properties are periodic functions of electronic configuration. All four statements are true.
Teacher's Note: Periodicity follows electronic configuration.
Exam Note: State the modern periodic law.
Question 62 (More Than One Answer Correct). In the electrolysis of alumina, cryolite is added to:
(a) lower the melting point of alumina
(b) increase the electrical conductivity
(c) minimise the anode effect
(d) remove impurities from alumina
Solution. Answer: (a), (b). Cryolite is added to lower the melting point and to increase the conductivity of the electrolyte.
Teacher's Note: Pure Al2O3 melts near 2000 °C.
Exam Note: State two functions of cryolite.
Question 63 (More Than One Answer Correct). Of the following the metals that cannot be obtained by electrolysis of the aqueous solution of their salts are:
(a) Ag
(b) Mg
(c) Cu
(d) Al
Solution. Answer: (b), (d). Metals with E°RP(H+) > E°RP(Mn+) are not discharged in aqueous solution; Mg and Al are more electropositive than hydrogen, so H2 is evolved.
Teacher's Note: Active metals need fused-salt electrolysis.
Exam Note: Compare reduction potentials with H+.
Question 64 (More Than One Answer Correct). The compounds used as refrigerant are:
(a) NH3
(b) CCl4
(c) CF4
(d) CF2Cl2
Solution. Answer: (a), (d). NH3 and CF2Cl2 (freon-12) are used as refrigerants (these are facts).
Teacher's Note: Freon-12 is a CFC refrigerant.
Exam Note: Name two refrigerants.
Question 65 (More Than One Answer Correct). The major role of fluorspar (CaF2), which is added in small quantities in the electrolytic reduction of alumina dissolved in fused cryolite (Na3AlF6) is:
(a) As a catalyst
(b) To make the fused mixture very conducting
(c) To lower the temperature of the melt
(d) To decrease the rate of oxidation of carbon at the anode
Solution. Answer: (b), (c). Fluorspar lowers the fusion temperature of the mixture and improves its conductivity (printed key, identical to Q157).
Teacher's Note: CaF2 acts as a flux in the cell.
Exam Note: State role of fluorspar.
Question 66 (More Than One Answer Correct). MgSO4 on reaction with NH4OH and Na2HPO4 forms a white crystalline precipitate. What is its formula?
(a) Mg(NH4)PO4
(b) Mg3(PO4)2
(c) MgCl2·MgSO4
(d) MgSO4
Solution. Answer: (a). The product is white precipitate of magnesium ammonium phosphate: MgSO4 + Na2HPO4 + NH4OH → Mg(NH4)PO4↓ + Na2SO4 + H2O.
Teacher's Note: Same as the Mg2+ test above.
Exam Note: Write the balanced equation.
Question 67 (More Than One Answer Correct). The aqueous solution of the following salts will be coloured in the case of:
(a) Zn(NO3)2
(b) LiNO3
(c) Co(NO3)2
(d) CrCl3
Solution. Answer: (c), (d). Co(NO3)2 and CrCl3 have unpaired d electrons, hence are coloured; Zn(NO3)2, LiNO3 and potash alum have no unpaired electron (completely filled shell), hence are colourless.
Teacher's Note: Zn2+ is d10; Li+ has a noble-gas core.
Exam Note: Check unpaired d electrons.
Question 68 (More Than One Answer Correct). If the bond length of CO bond in carbon monoxide is 1.128 Å, then what is the value of CO bond length in Fe(CO)5?
(a) 11.28 pm
(b) 110 pm
(c) 113 pm
(d) 120 pm
Solution. Answer: (c). In carbonyls double bonding takes place (σ donation M←C, π back donation M→C). Back donation populates π* of CO, so the C–O bond order decreases and the bond length increases slightly, to about 113 pm.
Teacher's Note: Synergic bonding lengthens the C–O bond.
Exam Note: Convert 1.128 Å to 112.8 pm first.
Question 69 (More Than One Answer Correct). The reagents, NH4Cl and aqueous NH3 will precipitate:
(a) Ca2+
(b) Al3+
(c) Bi3+
(d) Zn2+
Solution. Answer: (b), (c). Al3+ + 3NH4OH → Al(OH)3↓ + 3NH4+; Bi3+ + 3NH4OH → Bi(OH)3↓ + 3NH4+. Al3+ and Bi3+ are precipitated as their hydroxides; Zn2+ forms a soluble ammine and Ca2+ stays dissolved.
Teacher's Note: NH4Cl suppresses OH–; only the least soluble hydroxides precipitate.
Exam Note: Explain the role of NH4Cl.
Question 70 (More Than One Answer Correct). Which of the following statement(s) is (are) correct with reference to the ferrous and ferric ions?
(a) Fe3+ gives brown colour with potassium ferricyanide
(b) Fe2+ gives blue precipitate with potassium ferricyanide
(c) Fe3+ gives red colour with potassium thiocyanate
(d) Fe2+ gives brown colour with ammonium thiocyanate
Solution. Answer: (a), (b), (c). 3FeCl2 + 2K3[Fe(CN)6] → Fe3[Fe(CN)6]2 + 6KCl (Turnbull's blue); FeCl3 + K3[Fe(CN)6] → Fe[Fe(CN)6] + 3KCl (brown colour); Fe3+ + KCNS → [Fe(CNS)]2+ (blood red).
Teacher's Note: Turnbull's blue is from Fe2+.
Exam Note: Name the products of both tests.
Question 71 (More Than One Answer Correct). The species present in solution when CO2 is dissolved in water are:
(a) CO2, H2CO3, HCO3–, CO32–
(b) H2CO3, CO32–
(c) CO32–, HCO3–
(d) CO2, H2CO3
Solution. Answer: (a). When CO2 dissolves in water it forms dibasic carbonic acid, which ionises to HCO3– and CO32–: CO2 + H2O ⇌ H2CO3; H2CO3 ⇌ H+ + HCO3–; HCO3– ⇌ H+ + CO32–. Hence CO2, H2CO3, HCO3– and CO32– are present.
Teacher's Note: Two-step ionisation of a diprotic acid.
Exam Note: Write the three equilibria.
Question 72 (More Than One Answer Correct). In which of the following oxides P-atom has two different oxidation states:
(a) P4O6
(b) P4O7
(c) P4O10
(d) P4O8
Solution. Answer: (b), (d). In P4O7 and P4O8 the P atoms have two different oxidation states (+3 and +5); in P4O6 all P are +3 and in P4O10 all are +5.
Teacher's Note: P4O7: 2 P(III) and 2 P(V) (per the oxygen count).
Exam Note: Compute oxidation states.
Question 73 (More Than One Answer Correct). Select the correct statements:
(a) O2 is a weak field ligand
(b) ClF3 is used in enrichment of uranium
(c) ICl is more reactive than I2
(d) O3, CO, CO2, NO2, N2O, CH4, CFCl3 are green house gases
Solution. Answer: (b), (c), (d). Statements (b), (c), (d) are correct. O2 is a strong-field ligand (e.g. oxyhaemoglobin is low spin), so (a) is wrong. ClF3 converts U to UF6: U + 3ClF3 → UF6 + 3ClF.
Teacher's Note: UF6 is volatile for enrichment.
Exam Note: Write the U + ClF3 reaction.
Question 74 (More Than One Answer Correct). Select the correct statements:
(a) oxyhaemoglobin is bright red
(b) deoxyhaemoglobin is purple
(c) oxyhaemoglobin is low spin complex
(d) oxyhaemoglobin absorbs light of longer wave length
Solution. Answer: (a), (b), (c). Oxyhaemoglobin is red and absorbs light of smaller wavelength (blue-green), so (d) is wrong; oxyhaemoglobin is a low-spin complex, deoxyhaemoglobin is purple.
Teacher's Note: Red colour means blue-green light is absorbed.
Exam Note: Link colour seen to light absorbed.
Question 75 (More Than One Answer Correct). Select the correct statements:
(a) Solubility of salts containing anions i.e., Cl–, SO42– that do not hydrolyse are unaffected by pH
(b) Solubility of BaF2 in water increases in presence of H+ ions
(c) Solubility of Mg(OH)2 may increase or decrease with pH
(d) On adding lime juice into tea, the colour of tea becomes darker
Solution. Answer: (a), (b), (c). Tea contains polyphenols, which are weak acids; lemon juice (citric acid) suppresses their dissociation and the tea colour becomes lighter (ionised polyphenols are darker), so (d) is wrong. BaF2 ⇌ Ba2+ + 2F–; F– + H+ → HF shifts the equilibrium right, increasing solubility.
Teacher's Note: Conjugate bases of weak acids dissolve more in acid.
Exam Note: Explain pH effect on BaF2.
Question 76 (More Than One Answer Correct). When PbO2 reacts with conc. HNO3, the gas evolved is: (IIT 2005)
(a) NO2
(b) O2
(c) N2
(d) N2O
Solution. Answer: (b). 2PbO2 → 2PbO + O2; PbO + 2HNO3 → Pb(NO3)2 + H2O, so O2 is evolved.
Teacher's Note: Pb(IV) oxidises water to O2.
Exam Note: Write both steps.
Question 77 (More Than One Answer Correct). A solution of colourless salt H on boiling with excess NaOH produces a non-inflammable gas. The gas evolution ceases after sometime. Upon addition of Zn dust to the same solution, the gas evolution restarts. The colourless salt(s) H is/are: (IIT 2008)
(a) NH4NO3
(b) NH4NO2
(c) NH4Cl
(d) (NH4)2SO4
Solution. Answer: (a), (b). NH4NO3 + NaOH → NH3↑ + NaNO3 + H2O (NH3 is non-inflammable); then NaNO3 + 4Zn + 7NaOH → 4Na2ZnO2 + NH3 + 2H2O; similarly nitrite with Zn gives NH3 again.
Teacher's Note: Nitrate and nitrite are reduced to NH3 by Zn in alkali.
Exam Note: Write the Zn/NaOH reduction.
Question 78 (More Than One Answer Correct). Which are correct about [Fe(H2O)5NO]SO4? (Modified IIT 2008)
(a) It is diamagnetic as it has no unpaired electron
(b) It is paramagnetic as it has three unpaired electrons
(c) Ox. no. of Fe is +2
(d) Ox. no. of Fe is +1
Solution. Answer: (b), (d). In the iron complex the oxidation number of NO is +1 and Fe is in Fe+ state, i.e. 3d74s0 (one electron of d paired by 4s1 in presence of NO+), so there are three unpaired electrons: paramagnetic.
Teacher's Note: NO+ makes Fe(I), d7.
Exam Note: Count unpaired electrons in d7.
Question 79 (More Than One Answer Correct). The nitrogen oxide(s) that contain(s) N–N bond(s) is(are): (IIT 2009)
(a) N2O
(b) N2O3
(c) N2O4
(d) N2O5
Solution. Answer: (a), (b), (c). N2O (N≡N→O), N2O3 (O=N–N(=O)–O type, ON–NO2) and N2O4 (O2N–NO2) contain N–N bonds; N2O5 (O2N–O–NO2) has an N–O–N link, no N–N bond.
Teacher's Note: Draw each structure and look for N–N.
Exam Note: Draw N2O3, N2O4 structures.
Question 80 (More Than One Answer Correct). The compound(s) formed upon combustion of sodium metal in excess air is(are): (IIT 2009)
(a) Na2O2
(b) Na2O
(c) NaO2
(d) NaOH
Solution. Answer: (a). 2Na + O2 (air) → Na2O2; sodium burns in excess air to give the peroxide.
Teacher's Note: Na gives peroxide; K, Rb, Cs give superoxide.
Exam Note: State Na and K products.
Question 81 (More Than One Answer Correct). The compound(s) that exhibit(s) geometrical isomerism is(are): (IIT 2009)
(a) [Pt(en)Cl2]
(b) [Pt(en)2]Cl2
(c) [Pt(en)2Cl2]Cl2
(d) [Pt(NH3)2Cl2]
Solution. Answer: (c), (d). [Pt(en)2Cl2]2+ (octahedral, Pt(IV)) has cis (optically active) and trans forms; square planar [Pt(NH3)2Cl2] has cis (light yellow) and trans (dark yellow) forms (figure). [Pt(en)Cl2] and [Pt(en)2]Cl2 show none.
Teacher's Note: MA2B2 square planar has cis/trans.
Exam Note: Draw cis and trans forms.
Question 82 (More Than One Answer Correct). The reagents used for softening the temporary hardness of water is (are): (IIT 2010)
(a) Ca3(PO4)2
(b) Ca(OH)2
(c) Na2CO3
(d) NaOCl
Solution. Answer: (b), (c), (d). Ca(HCO3)2 + Ca(OH)2 → 2CaCO3↓ + 2H2O (Clark's method); Ca(HCO3)2 + Na2CO3 → CaCO3↓ + 2NaHCO3 (both permanent and temporary hardness are removed by Na2CO3); NaOCl + H2O → HOCl + NaOH, and NaOH + Ca(HCO3)2 → CaCO3↓ + Na2CO3 + H2O.
Teacher's Note: Remove HCO3– by precipitating CaCO3.
Exam Note: Write Clark's reaction.
Question 83 (More Than One Answer Correct). Extraction of metal from the ore cassiterite involves: (IIT 2011)
(a) Carbon reduction of an oxide ore
(b) Self reduction of a sulphide ore
(c) removal of copper impurity
(d) removal of iron impurity
Solution. Answer: (a), (c), (d). Cassiterite is SnO2: smelting SnO2 + 2C → Sn + 2CO (carbon reduction). The liquid Sn contains Cu, W, Fe impurities: tungsten and iron are removed by flowing the liquid metal on an inclined plane (leaving iron, copper and tungsten behind), and the molten Sn is stirred with green wood poles to oxidise impurities of S, As.
Teacher's Note: Ore is an oxide, so self reduction does not apply.
Exam Note: Name cassiterite's formula and reductant.
Question 84 (More Than One Answer Correct). Which of the following hydrogen halides react(s) with AgNO3(aq) to give a precipitate that dissolves in Na2S2O3(aq)? (IIT 2012)
(a) HCl
(b) HF
(c) HBr
(d) HI
Solution. Answer: (a), (c), (d). HX + AgNO3 → AgX↓ + HNO3 (X = Cl, Br, I); AgX + 2Na2S2O3 → Na3[Ag(S2O3)2] + NaX (colourless solution). AgF is water soluble, so no precipitate forms with HF.
Teacher's Note: Ag+ halides dissolve in hypo as a complex.
Exam Note: Why HF gives no precipitate.
Question 85 (More Than One Answer Correct). For the given aqueous reactions, which of the statement(s) is(are) true? (IIT 2012) Excess KI + K3[Fe(CN)6] →(dilute H2SO4) brownish-yellow solution →(ZnSO4) white precipitate + brownish-yellow filtrate →(Na2S2O3) colourless solution
(a) The first reaction is a redox reaction
(b) White precipitate is Zn3[Fe(CN)6]2
(c) Addition of filtrate to starch solution gives blue colour
(d) White precipitate is soluble in NaOH solution
Solution. Answer: (a), (c), (d). K3[Fe(CN)6] + KI (excess) → K4[Fe(CN)6] + KI3 (redox, brownish-yellow I3–); I3– + 2Na2S2O3 → Na2S4O6 + 2NaI + I– (colourless); K4[Fe(CN)6] + ZnSO4 → K2Zn3[Fe(CN)6]2 (white ppt.), which dissolves in NaOH as Na2[Zn(OH)4]. The white precipitate is K2Zn3[Fe(CN)6]2, not Zn3[Fe(CN)6]2, so (b) is false. Starch gives blue colour with I2 present with I3–.
Teacher's Note: Ferricyanide oxidises I– to I2.
Exam Note: Write the three reactions.
Question 86 (More Than One Answer Correct). With respect to graphite and diamond, which of the statement(s) given below is(are) correct? (IIT 2012)
(a) Graphite is harder than diamond
(b) Graphite has higher electrical conductivity than diamond
(c) Graphite has higher thermal conductivity than diamond
(d) Graphite has higher C–C bond order than diamond
Solution. Answer: (b), (d). Diamond is harder than graphite. Graphite is a good conductor of electricity as each carbon is attached to three C atoms (sp2) leaving one free p electron; in diamond all four valencies are satisfied. Diamond is the better thermal conductor than graphite (compact, aligned lattice carries thermal vibrations). In graphite C–C bond acquires double bond character, hence higher bond order.
Teacher's Note: Graphite: free π electrons, partial double bond.
Exam Note: Compare conductivities.
Question 87 (More Than One Answer Correct). The pair(s) of coordination complexes/ions exhibiting the same kind of isomerism is(are): [JEE (Advanced) I 2013]
(a) [Cr(NH3)5Cl]Cl2 and [Cr(NH3)4Cl2]Cl
(b) [Co(NH3)4Cl2]+ and [Pt(NH3)2(H2O)Cl]+
(c) [CoBr2Cl2]2– and [PtBr2Cl2]2–
(d) [Pt(NH3)3(NO3)]Cl and [Pt(NH3)3Cl]Br
Solution. Answer: (b), (d). (a) [Cr(NH3)5Cl]Cl2 shows ionisation isomerism but [Cr(NH3)4Cl2]Cl also shows geometrical isomerism. (b) Both [Co(NH3)4Cl2]+ and [Pt(NH3)2(H2O)Cl]+ show geometrical isomerism. (c) [CoBr2Cl2]2– is sp3 (tetrahedral) and shows no isomerism, while [PtBr2Cl2]2– is dsp2 and shows geometrical isomerism. (d) Both [Pt(NH3)3(NO3)]Cl and [Pt(NH3)3Cl]Br show ionisation isomerism.
Teacher's Note: Identify the isomerism type in each pair.
Exam Note: Name the isomerism of each complex.
Question 88 (More Than One Answer Correct). The correct statement(s) about O3 is/are: [JEE (Advanced) II 2013]
(a) O–O bond lengths are equal
(b) Thermal decomposition of O3 is endothermic
(c) O3 is diamagnetic in nature
(d) O3 has a bent structure
Solution. Answer: (a), (c), (d). Both O–O bonds are equal due to resonance; the central O is sp2 hybridised with 2σ and 1π along with one lone pair, giving a bent structure; O3 is diamagnetic as it has no unpaired electron. O2 → O3 has ΔH = +ve, so O3 → O2 has ΔH = –ve (exothermic), hence (b) is false.
Teacher's Note: Resonance equalises the O–O bonds.
Exam Note: Sign of ΔH for O3 decomposition.
Question 89 (More Than One Answer Correct). The carbon-based reduction method is NOT used for the extraction of: [JEE (Advanced) II 2013]
(a) tin from SnO2
(b) iron from Fe2O3
(c) aluminium from Al2O3
(d) magnesium from MgCO3·CaCO3
Solution. Answer: (c), (d). More electropositive metals like Al, Mg, Ca, Na are reduced by electrolytic reduction, not by carbon reduction, because these form carbides with carbon.
Teacher's Note: Al2O3 is too stable for carbon to reduce.
Exam Note: Name the method for Al and Mg.
P Bahadur Solutions for JEE Mathematics: P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 2
Chapter-wise P Bahadur Solutions: P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 2
Access the complete chapter-wise PDF for P Bahadur Solutions Numerical Chemistry Chapter 20 Qualitative Estimations Part 2. These structured P Bahadur Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Explore More Study Resources for JEE Math
In addition to these P Bahadur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.