P Bahadur Solutions for JEE Chemistry: Chapter 13 Ionic Equilibrium
Review structured textbook solutions for JEE Chemistry Chapter 13 Ionic Equilibrium prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice JEE Chemistry Solutions: Chapter 13 Ionic Equilibrium
Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Ionic Equilibrium - Numerical Problems 1 to 118
Numerical Problems
Question 1. Calculate the amount of acetic acid present in one litre of its solution having α = 1% and Ka = 1.8×10-5.
Solution. CH3COOH ⇌ CH3COO- + H+; if C mol/litre is the concentration, [H+] = Cα, [CH3COO-] = Cα, [CH3COOH] = C(1-α). Ka = Cα·Cα/C(1-α) = Cα2 (Ka is small, so 1-α ≈ 1). 1.8×10-5 = C×(1/100)2, so C = 0.18. 1 litre of solution contains 0.18 mole of CH3COOH, i.e. 0.18×60 = 10.8 g CH3COOH.
Teacher's Note: Ostwald's law: Ka = Cα2 for weak acid; convert moles to grams at the end using M = 60.
Exam Note: Final step: moles × 60 g/mol; state unit g per litre.
Question 2. 0.16 g of N2H4 are dissolved in water and the total volume made upto 500 mL. Calculate the percentage of N2H4 that has reacted with water in this solution. The Kb for N2H4 is 4.0×10-6 M. (Roorkee 1998)
Solution. N2H4 + H2O ⇌ N2H5+ + OH-. Kb = Cα2/(1-α) ≈ Cα2 (1-α ≈ 1). [N2H4] = C = 0.16×1000/(32×500) = 0.01. α2 = 4×10-6/0.01 = 4×10-4, so α = 2×10-2 = 0.02, i.e. 2%.
Teacher's Note: Molarity from grams (0.16/32 in 0.5 L), then α = √(Kb/C).
Exam Note: Convert α to percent; assume 1-α ≈ 1 and say so.
Question 3. Nicotinic acid (Ka = 1.4×10-5) is represented by the formula HNiC. Calculate its per cent dissociation in a solution which contains 0.10 mole of nicotinic acid per 2.0 litre of solution. (Roorkee 1993)
Solution. HNiC ⇌ H+ + NiC-. C = 0.1/2 = 5×10-2 mol litre-1; Ka = 1.4×10-5. Ka = Cα2/(1-α) ≈ Cα2, so α = √(Ka/C) = √(1.4×10-5/5×10-2) = 1.67×10-2 or 1.67%.
Teacher's Note: Concentration must be per litre of final solution: 0.10 mol in 2.0 L gives 0.05 M.
Exam Note: Dividing moles by 2.0 L first is the mark-earning step.
Question 4. Saccharin (Ka = 2×10-12) is a weak acid represented by formula HSaC. 4×10-4 mole of saccharin is dissolved in 200 cm3 water of pH 3. Assuming no change in volume, calculate the concentration of SaC- ions in the resulting solution at equilibrium. (Roorkee 1994)
Solution. [HSaC] = (4×10-4/200)×1000 = 2×10-3 M. The dissociation of HSaC takes place in presence of [H+] = 10-3. HSaC ⇌ H+ + SaC-. In presence of H+ the dissociation of HSaC is almost negligible because of common ion effect. Thus, at equilibrium [HSaC] = 2×10-3; [H+] = 10-3. Ka = [H+][SaC-]/[HSaC], so 2×10-12 = 10-3[SaC-]/(2×10-3), hence [SaC-] = 4×10-12 M.
Teacher's Note: Water of pH 3 already supplies [H+] = 10-3, so common-ion effect keeps [HSaC] undissociated.
Exam Note: Use [H+] = 10-3 from the given pH, not from the acid.
Question 5. Acetyl salicylic acid, i.e., aspirin ionises in water as: HC9H7O4 + H2O ⇌ H3O+ + C9H7O4-; Ka = 2.75×10-9. If two tablets of aspirin each of 0.32 g is dissolved in water to produce 250 mL solution, calculate [H+], [OH-] and [C9H7O4-] in solution.
Solution. [HC9H7O4] = 0.32×2×1000/(180×250) = 0.014 M. α = √(Ka/C) = √(2.75×10-9/0.014) = 4.43×10-4. [H+] = C·α = 0.014×4.43×10-4 = 6.21×10-6 M. [C9H7O4-] = C·α = 6.21×10-6 M. [OH-] = 10-14/[H+] = 10-14/(6.21×10-6) = 1.61×10-9 M.
Teacher's Note: Two tablets give 0.64 g in 250 mL; weak acid so [H+] = Cα, then [OH-] from Kw.
Exam Note: Anion concentration equals [H+]; [OH-] needs Kw.
Question 6. The ionisation constant of NH4+ in water is 5.6×10-10 at 25°C. The rate constant for the reaction of NH4+ and OH- to form NH3 and H2O at 25°C is 3.4×1010 litre mol-1 sec-1. Calculate the rate constant for proton transfer from water to NH3. (IIT 1996)
Solution. NH3 + H2O ⇌ NH4+ + OH-; Kf = rate constant of the forward reaction (proton transfer from water to NH3), Kb = 3.4×1010 = rate constant of the backward reaction. NH4+ + H2O ⇌ NH4OH + H+; Ka = 5.6×10-10. K(base)NH3 = Kf/Kb = Kw/Kacid(NH4+) (since Kacid×Kbase = Kw). So Kf/(3.4×1010) = 10-14/(5.6×10-10), giving Kf = 6.07×105 litre mol-1 sec-1.
Teacher's Note: Forward/backward rate constants give the equilibrium constant; Kb(NH3) = Kw/Ka(NH4+).
Exam Note: Identify which direction is 'proton transfer from water to NH3' first.
Question 7. Calculate the concentration of fluoroacetic acid which is required to get [H+] = 1.50×10-3 M. Ka of acid = 2.6×10-3.
Solution. CH2FCOOH ⇌ CH2FCOO- + H+; moles before dissociation 1, 0, 0; after (1-α), α, α. Given [H+] = C·α = 1.50×10-3 mol litre-1. Ka = (Cα)(Cα)/C(1-α) = Cα2/(1-α), so 2.6×10-3 = 1.5×10-3×α/(1-α), α = 0.634. Now C·α = 1.50×10-3, so C = 1.50×10-3/0.634 = 2.37×10-3 M. Note: Since Ka is of the order of 10-3 M and thus it is not advisable to use Ka = Cα2, because (1-α) is not equal to 1 since α is not small.
Teacher's Note: Ka ~ 10-3 here, so 1-α ≈ 1 fails; use the full expression Ka = [H+]α/(1-α).
Exam Note: Do not apply Ka = Cα2 when α is large; say so.
Question 8. An aqueous solution contains 10% ammonia by mass and has a density of 0.99 g cm-3. Calculate hydroxyl and hydrogen ion concentration in this solution. Ka for NH4+ = 5.0×10-10 M. (Roorkee 1995)
Solution. mass of NH3/mass of solution = 10/100. 100 g solution contains 10 g NH3, so MNH3 = (10×1000)/[(17)×(100/0.99)] = 5.82 (V = mass/density). NH3 + H2O → NH4OH ⇌ NH4+ + OH-; [OH-] = C·α = C√(Kb/C) = √(Kb·C). C = 5.82 M and Kb = Kw/Ka = 10-14/(5×10-10) = 2×10-5. [OH-] = √(2×10-5×5.82) = 1.07×10-2 M; [H+] = 10-14/1.07×10-2 = 0.9268×10-12 M; pH = 12.0330.
Teacher's Note: Mass % and density give molarity (5.82 M); Kb of NH3 comes from Kw/Ka of NH4+.
Exam Note: Volume of 100 g = 100/0.99 mL is the trap.
Question 9. Liquid ammonia ionises to a slight extent. At -50°C, its ionisation constant, KNH3 = [NH4+][NH2-] = 10-30. How many amide ions are present per cm3 of pure liquid ammonia ? Assume N = 6.0×1023.
Solution. 2NH3 ⇌ NH4+ + NH2- (self ionisation); K = [NH4+][NH2-], so [NH4+] = [NH2-] = √K = √10-30 = 10-15 M. Number of amide ions in 103 cm3 = 10-15×6×1023. Number of amide ions in one cm3 = 10-15×6×1023/103 = 6×105 ions.
Teacher's Note: Self-ionisation gives equal ion concentrations; convert mol/L to ions per cm3 using N and 1000 cm3.
Exam Note: Divide by 1000 to go from per litre to per cm3.
Question 10. The ionisation constant for pure formic acid, K = [HCOOH2+][HCOO-] has been estimated as 10-6 at room temperature. What percentage of formic acid molecules in pure formic acid is converted to formate ion? The density of formic acid is 1.22 g/cm3.
Solution. Density of formic acid = 1.22 g/cm3, so mass of formic acid in 1 litre = 1.22×103 g. [HCOOH] = 1.22×103/46 = 26.5 M. In auto ionisation [HCOOH2+] = [HCOO-] and [HCOO-][HCOOH2+] = 10-6, so [HCOO-] = 10-3. % dissociation of HCOOH = ([HCOO-]×100)/[HCOOH] = (10-3/26.5)×100 = 0.004% [α = Cα/C(1-α)].
Teacher's Note: Pure liquid concentration (26.5 M) comes from density; ion concentration is √K.
Exam Note: Compute molarity of the pure liquid before the percentage.
Question 11. Calculate the dissociation constant of NH4OH at 25°C, if ΔH° and ΔS° for the given changes are as follows: NH3 + H+ ⇌ NH4+; ΔH° = -52.2 kJ mol-1. H2O ⇌ H+ + OH-; ΔH° = 56.6 kJ mol-1. NH4OH ⇌ NH4+ + OH-; ΔS° = -76.53 JK-1 mol-1.
Solution. Adding the first two: NH3 + H2O ⇌ NH4+ + OH-; ΔH° = 4.4 kJ mol-1, and ΔS° = -76.53 JK-1 mol-1 for the change. ΔG° = ΔH° - TΔS° = 4.4 - (-76.53×10-3)×298 = 27.21 kJ mol-1. Also ΔG° = -2.303RT log Kb: 27.21 = -2.303×8.314×10-3×298 log Kb, so Kb = 1.7×10-5.
Teacher's Note: Add steps to get ionisation ΔH°; then ΔG° = ΔH° - TΔS° = -RT ln K; watch kJ versus J.
Exam Note: Convert ΔS° to kJ before combining with ΔH°.
Question 12. Prove that degree of dissociation of a weak acid is given by: α = 1/(1+10(pKa-pH)) where Ka is its dissociation constant.
Solution. For a weak monoprotic acid HA ⇌ H+ + A-; before dissociation 1, 0, 0; after dissociation 1-α, α, α. [H+] = Cα ...(i) and Ka = Cα2/(1-α) ...(ii). Substituting C from (ii) in (i): [H+] = Ka(1-α)/α ...(iii). Thus -log[H+] = -[log Ka + log(1-α) - log α], or pH = log(1/Ka) + log(α/(1-α)) ...(iv). Also pH = pKa - log[(1-α)/α], or log[(1-α)/α] = pKa - pH. So (1-α)/α = 10(pKa-pH), or 1/α - 1 = 10(pKa-pH). Hence α = 1/(1+10(pKa-pH)).
Teacher's Note: Eliminate C between [H+] = Cα and Ka = Cα2/(1-α); take logs.
Exam Note: Proofs earn marks for the substitution and the log step.
Question 13. Determine degree of dissociation of 0.05 M NH3 at 25°C in a solution of pH = 11.
Solution. NH4OH ⇌ NH4+ + OH-; 1, 0, 0 → (1-α), α, α. pH = 11, so [H+] = 10-11, [OH-] = 10-3 = Cα. Since C = 0.05, α = 10-3/C = 10-3/0.05 = 2×10-2 or 2%.
Teacher's Note: pH gives [OH-] = Cα directly, so no Kb needed.
Exam Note: Convert pH to pOH to [OH-] then divide by C.
Question 14. In the qualitative analysis, Bi3+ is detected by the appearance of the precipitates of bismuthyl hydroxide [BiO(OH)s]. Calculate the pH when the following equilibrium exists Kb for BiO(OH) = 4×10-10.
Solution. [OH-]×[BiO+] = 4×10-10; [OH-]2 = 4×10-10, so [OH-] = 2×10-5; pOH = 4.6989; pH = 9.3010.
Teacher's Note: Dissolution gives equal [BiO+] and [OH-], so [OH-] = √Kb.
Exam Note: State [BiO+] = [OH-].
Question 15. Calculate the concentration of all species of significant concentrations present in 0.1 M H3PO4 solution. K1 = 7.5×10-3, K2 = 6.2×10-8, K3 = 3.6×10-13. Also calculate pH of solution.
Solution. I step: H3PO4 ⇌ H+ + H2PO4-; K1 = 7.5×10-3. II step: H2PO4- ⇌ H+ + HPO42-; K2 = 6.2×10-8. III step: HPO42- ⇌ H+ + PO43-; K3 = 3.6×10-13.
For I step: 0.1 → (0.1-C), C, C. K1 = C·C/(0.1-C) = 7.5×10-3, so C = 0.024. [H+] = 0.024 M, pH = 1.6198; [H2PO4-] = 0.024 M; [H3PO4] = 0.1 - 0.024 = 0.076 M. (Solving C2 + 7.5×10-3C - 7.5×10-4 = 0 gives C = 0.024; the book prints the equation with C3, a misprint for C2.) K1 is much larger than K2 and K3. Also H+ furnished in I step and thus dissociation of II and III steps is further suppressed due to common ion effect.
For II step: H2PO4- ⇌ H+ + HPO42-; 0.024, 0.024, 0 → (0.024-y), (0.024+y), y. K2 = (0.024+y)y/(0.024-y) = 6.2×10-8; y is small so 0.024 ± y ≈ 0.024 and 6.2×10-8 = 0.024y/0.024, y = 6.2×10-8; [HPO42-] = K2 = 6.2×10-8 (insignificant).
For III step: HPO42- ⇌ H+ + PO43-; (6.2×10-8-x), (0.024+x), x. K3 = (0.024+x)x/(6.2×10-8-x), neglecting x: 3.6×10-13 = 0.024x/(6.2×10-8), x = 3.6×10-13×6.2×10-8/0.024 = 9.3×10-19 (insignificant). Note: For weak polyprotic acids the anion concentration produced in II step of dissociation is always equal to K2 if concentration is reasonable.
Teacher's Note: Only step I gives significant H+; solve K1 as a quadratic; later anions equal K2, tiny.
Exam Note: Solve step I as a quadratic; list significant species only.
Question 16. Calculate the [OH-] of [NH2·C2H4NH3]+ and [H3N-C2H4NH3]2+ in 0.15 M ethylene diamine (aq.); if NH2C2H4NH2 + H2O ⇌ NH2C2H4NH3+ + OH-; K1 = 8.5×10-5; NH2C2H4NH3+ + H2O ⇌ [NH3C2H4NH3]2+ + OH-; K2 = 2.7×10-8.
Solution. Case I: [OH-] = [NH2C2H4NH3+] = C×√(Kb1/C) = √(0.15×8.5×10-5) = 3.57×10-3 M.
Case II: NH2C2H4NH3+ + H2O ⇌ [NH3C2H4NH3]2+ + OH-; 3.57×10-3, 0, 3.57×10-3 → [3.57×10-3 - X], X, (X + 3.57×10-3). K2 = X·(X+3.57×10-3)/(3.57×10-3 - X). Neglecting X (X is very small): 2.7×10-8 = (3.57×10-3/3.57×10-3)·X, X = 2.7×10-8. So [NH3C2H4NH32+] = 2.7×10-8 M = Kb2.
Teacher's Note: Second ionisation occurs in presence of OH- from the first, so the second cation equals Kb2.
Exam Note: Treat step 2 as common-ion; neglect X against 3.57×10-3.
Question 17. Calculate pH of (1) 10-3 N HNO3, (2) 10-3 M H2SO4, (3) 10-3 N H2SO4, (4) 0.01 N HCl, (5) 10-8 N HCl, (6) 102 M HCl.
Solution. Strong acids ionise completely at normal dilutions.
(1) 10-3 N HNO3 → H+ + NO3-; [H+] = 10-3 mol/litre (H+ is monovalent), pH = -log 10-3 = 3.
(2) 10-3 M H2SO4 → 2H+ + SO42-; mole ratio H2SO4 : H+ : SO42- :: 1 : 2 : 1, so [H+] = 2×10-3 M, pH = -log 2×10-3 = 2.6989.
(3) 10-3 N H2SO4: equal equivalents of a substance give equal equivalents of its components, so [H+] = 10-3 M and pH = 3.
(4) 0.01 N HCl: HCl → H+ + Cl-; [H+] = 10-2 M, pH = 2.
(5) 10-8 N HCl. Solution I: [H+] = 10-8 M but pH = 8 is not possible because it is acid. Now [H+] = 10-7 M are already present in solution from water and since 10-8 < 10-7 it should not be neglected. [H+] = 10-8 + 10-7 = 10-7(1.1) = 1.1×10-7 M, pH = 6.9586. Solution II: The above solution lacks with discrepancy that dissociation of H2O, a weak electrolyte is also suppressed in presence of HCl due to common ion effect and thus, [H+]H2O ≠ 10-7 but will be lesser than this. Therefore, dissociation of H2O in presence of 10-8 M H+: H2O ⇌ H+ + OH-; (10-8 + a), a. Kw = (10-8 + a)a, so a = 0.95×10-7. [H+] = 10-8 + 0.95×10-7 = 10-7×1.05 = 1.05×10-7, pH = 6.9788.
(6) 102 M HCl → H+ + Cl-; [H+] = 102 M, pH = -2.
Students are often under the illusion that it is impossible to have a negative pH. There is no theoretical basis for this. A negative pH only means that the hydrogen ion concentration is greater than 1 M. However in actual practice, a negative pH is uncommon because of two reasons. First, even strong acids (say 100% H2SO4) become partially dissociated at high concentrations. The second reason has to do with activity. Sorensons originally intended pH to be related to [H+], but his fundamental method of measurement (the hydrogen electrode) is now known to depend on thermodynamic activities rather than [H+], i.e., aH+ = [H+]fH+. In dilute solutions activity coefficient fH+ is near enough to unity and thus aH+ = [H+]. At high concentrations, the activity coefficient is less than unity. Thus, pH defined by -log[H+] is not only of little theoretical significance, but in fact cannot be measured directly. It has therefore come to be accepted that pH = -log10 aH+ (this is what a pH meter reading is a measure of), i.e., pH of 102 M HCl cannot be calculated until fH+ is known. Nevertheless, there is mathematically no basis for not having a negative pH.
Teacher's Note: Normality versus molarity decides [H+]; at 10-8 N the water's own H+ cannot be ignored.
Exam Note: For 10-8 N acid, never write pH 8; add water's H+.
Question 18. Calculate pH for acid solutions having [H+] as (a) [H+] = 0.05 M, (b) [H+] = 5.0 M, (c) [H+] = 10-8 M.
Solution. (a) [H+] = 0.05 = 5×10-2; pH = -log[H+] = -log 5×10-2, pH = 1.3010.
(b) [H+] = 5.0 M but pH ≠ -log 5 ≠ -0.6989. See Problem 17 part 6.
(c) [H+] = 10-8 but pH ≠ -log 10-8 ≠ 8. See Problem 17 part 5 (pH = 6.9788).
Teacher's Note: Direct pH = -log[H+] works only at moderate concentration; extremes need the 17(5) and 17(6) reasoning.
Exam Note: Part (c) cannot be pH 8; it is acidic.
Question 19. Calculate pH for. (a) 0.001 N NaOH (b) 0.01 N Ca(OH)2 (c) 0.01 M Ca(OH)2 (d) 10-8 M NaOH (e) 102 M NaOH (f) 0.0008 M Mg(OH)2. Assume complete ionisation of each. (Roorkee 1992)
Solution. (a) NaOH → Na+ + OH-; 10-3 N → 10-3. [OH-] = 10-3 M (NNaOH = MNaOH); pOH = 3; pH = 14 - 3 = 11.
(b) Ca(OH)2 → Ca2+ + 2OH-; equivalents per litre are equal, so [OH-] = 10-2 M, pOH = 2, pH = 12.
(c) 0.01 M Ca(OH)2: mole ratio Ca(OH)2 : Ca2+ : OH- :: 1 : 1 : 2; [OH-] = 2×10-2 M, pOH = 1.6989, pH = 12.3010.
(d) 10-8 M NaOH: [OH-] = 10-8 M; now proceed for OH- as in problem 17 part 5 (water's own OH- must be included), giving [OH-] = 1.05×10-7 M, pOH = 6.9788, pH = 7.0212.
(e) 102 M NaOH: [OH-] = 102 M; now proceed as in problem 17 part 6 (pOH = -2, so pH = 16 formally; see the note under 17(6)).
(f) 0.0008 M Mg(OH)2: 8×10-4 M → Mg2+ + 2OH-; [OH-] = 16×10-4 M, pOH = 2.7958, pH = 11.2041.
Teacher's Note: Count OH- per formula unit: Ca(OH)2 and Mg(OH)2 give 2; N and M differ for these.
Exam Note: Parts (d) and (e) are extremes; follow the 17(5) and 17(6) logic.
Question 20. Calculate pH of basic solutions having [OH-] as (a) [OH-] = 0.05 M, (b) [OH-] = 5.0 M, (c) [OH-] = 10-8 M.
Solution. (a) [OH-] = 0.05 M = 5×10-2; pOH = -log[OH-] = 1.3010, so pH = 12.6989.
(b) [OH-] = 5: proceed as in problem 17 part 6 (pOH = -log 5 = -0.6990, so pH = 14.6990 formally; see the note under 17(6)).
(c) [OH-] = 10-8: proceed as in problem 17 part 5 (pH = 7.0212 after adding water's OH-).
Teacher's Note: Mirror of Q18: pH = 14 - pOH, valid for moderate [OH-] only.
Exam Note: Dilute (10-8 M) base must still be above pH 7.
Question 21. Calculate pH of (Given Ka CH3COOH = Ka NH4OH = 2.0×10-5) (a) 0.002 N acetic acid having 2.3% dissociation. (b) 0.002 N NH4OH having 2.3% dissociation.
Solution. (a) Acetic acid is weak and partially dissociated: CH3COOH ⇌ CH3COO- + H+; 1-α, α, α. [H+] = Cα = 2×10-3×2.3/100 = 4.6×10-5 M; pH = -log 4.6×10-5 = 4.3372.
(b) NH4OH is weak base and partially dissociated: NH4OH ⇌ NH4+ + OH-; [OH-] = Cα = 2×10-3×2.3/100 = 4.6×10-5 M; pOH = 4.3372; pH = 14 - 4.3372 = 9.6628.
Teacher's Note: For weak electrolytes use Cα with the given α, not the normality.
Exam Note: Given α makes Ka unnecessary.
Question 22. The average concentration of SO2 in the atmosphere over a city on a certain day is 10 ppm, when the average temperature is 298 K. Given that the solubility of SO2 in water at 298 K is 1.3653 mol litre-1 and the pKa of H2SO3 is 1.92, estimate the pH of rain on that day. (IIT 2000)
Solution. Concentration of SO2 in air is 10 ppm or 10 mole in 106 mole air or 10-5 mole SO2 per mole of air. Concentration of SO2 in air being substantial and since rain water is falling from enormously great height so, each drop of rain water will get saturated with SO2 before it reaches earth. Now the given concentration or solubility of SO2 at 298 K is 1.3653 M. This value of solubility corresponds when PSO2 = 1 atm. Thus according to Henry's law, [SO2] dissolved in water ∝ PSO2 in gas phase. Thus solubility of SO2 at the condition of PSO2 of 10-5 atm as P ∝ mole and therefore since solubility is reported at 1 atm: [SO2] dissolved at pressure 1 atm = 1.3653 M, so [SO2] dissolved at pressure 10-5 atm = 1.3653×10-5 M = C, i.e., [H2SO3] = [SO2] = 1.3653×10-5 M. Now SO2 + H2O ⇌ H+ + HSO3-; 1-α, α, α. Ka = Cα·Cα/C(1-α) = Cα2/(1-α), with pKa = 1.92 so Ka = 0.012: 0.012 = 1.3653×10-5α2/(1-α), i.e. 1.3653×10-5α2 + 0.012α - 0.012 = 0, α = [-0.012 + √(1.44×10-4 + 4×1.3653×10-5×0.012)]/(2×1.3653×10-5) ≈ 1. [H+] = C×α = 1.3653×10-5; pH = 4.8648. (The book writes the pKa step as 'pKb = 1.92'; it is the pKa of H2SO3.)
Teacher's Note: Henry's law scales solubility with partial pressure (10-5 atm); solution is so dilute that α ≈ 1.
Exam Note: Do not use Cα2; solve the quadratic for α.
Question 23. Calculate [H+] and [CHCl2COO-] in a solution that is 0.01 M HCl and 0.01 M in CHCl2COOH. Ka for CHCl2COOH is 5×10-2.
Solution. CHCl2COOH ⇌ CHCl2COO- + H+; C, 0, 0.01 → C(1-α), Cα, Cα + 0.01. Ka = Cα(Cα+0.01)/C(1-α) = α(0.01α+0.01)/(1-α) = 5×10-2, or 0.01α(1+α)/(1-α) = 5×10-2, i.e. α2 + 6α - 5 = 0, α = 0.7416. [CHCl2COO-] = 0.01×0.7416 = 7.416×10-3 M; [H+] = 7.416×10-3 + 0.01 = 0.0174 M.
Teacher's Note: HCl supplies 0.01 M H+ (common ion); Ka is large, so solve the quadratic for α.
Exam Note: Include HCl's H+ in the Ka expression.
Question 24. A solution contains 0.09 M CHCl2COOH and 0.1 M CH3COOH. The pH of this solution is 1. If Ka for acetic acid is 10-5, calculate Ka for CHCl2COOH.
Solution. pH will be decided by [H+] furnished by HCl and CHCl2COOH. CHCl2COOH ⇌ CHCl2COO- + H+; initial conc. 0.09, 0, 0.09 (from HCl); final conc. (0.09 - x), x, (0.09 + x). [H+] = 0.09 + x, but pH = 1, so [H+] = 10-1 = 0.1; 0.09 + x = 0.1, x = 0.01. Ka for CHCl2COOH = [H+][CHCl2COO-]/[CHCl2COOH] = 0.1×0.01/(0.09 - 0.01) = 1.25×10-2. (As printed, the book's working assumes a further 0.09 M H+ already present from HCl; the statement as printed does not mention HCl. Answer given as in the book.)
Teacher's Note: Acetic acid (Ka = 10-5) adds negligible H+; total [H+] = 0.1 fixes x = 0.01 for the stronger acid.
Exam Note: Weak acid's H+ is negligible next to the stronger acid.
Question 25. What is [H+] for a solution in which (i) pH = 3 (ii) pH = 4.75 ?
Solution. (i) pH = 3, or -log[H+] = 3, so [H+] = 10-3 M.
(ii) pH = 4.75, -log[H+] = 4.75, so [H+] = 1.7782×10-5 M.
Teacher's Note: Reverse pH: [H+] = 10-pH; non-integer pH needs antilog.
Exam Note: Use antilog of -4.75 on a calculator.
Question 26. The pH of 0.05 M aqueous solution of diethyl amine is 12.0. Calculate Kb. (Roorkee 1993)
Solution. Diethyl amine is base and give OH- as: (C2H5)2NH + H2O ⇌ (C2H5)2NH2+ + OH-; initial 1, 0, 0; equilibrium (1-α), α, α. [OH-] = Cα where C = 0.05 M. pH = 12, so pOH = 2, [OH-] = 10-2 M = Cα = 10-2; 0.05×α = 10-2, α = 0.2. For a base, Kb = Cα2/(1-α) = 0.05×(0.2)2/(1-0.2) = 0.05×0.04/0.8 = 2.5×10-3. Note: Do not use Kb = Cα2 since α = 0.2 and 1-α = 0.8.
Teacher's Note: α = 0.2 is not small, so Kb = Cα2/(1-α), not Cα2.
Exam Note: Using Cα2 alone gives 2.0×10-3, which is wrong.
Question 27. The Kw for 2H2O ⇌ H3O+ + OH- changes from 10-14 at 25°C to 9.62×10-14 at 60°C. What is pH of water at 60°C? What happens to its neutrality?
Solution. Kw for H2O at 25°C = 10-14; [H+][OH-] = 10-14 (Kw = [H+][OH-]), so [H+] = 10-7 M, pH = 7. Now Kw for H2O at 60°C = 9.62×10-14 = [H+][OH-]. For pure water [H+] = [OH-], so [H+]2 = 9.62×10-14, [H+] = √(9.62×10-14) = 3.10×10-7 M; pH = -log 3.10×10-7 = 6.51. Thus, pH of water becomes 6.51 at 60°C but the nature is neutral since calculation for pure water has been made, i.e. pH scale at 60°C becomes in between 0 to 13.02.
Teacher's Note: Pure water stays neutral when [H+] = [OH-]; neutral pH is √Kw based, so 6.51 at 60°C.
Exam Note: Neutral is [H+] = [OH-], not pH 7.
Question 28. Ionic product of water (Kw) = 1×10-14 at 25°C. What are dissociation constant of water and autoprotonation constant of water?
Solution. H2O ⇌ H+ + OH- (molarity of water = 55.6 M). Kb (dissociation constant) = [H+][OH-]/[H2O] = Kw/[H2O] = 10-14/55.6 = 1.8×10-16. Also H2O + H2O ⇌ H3O+ + OH-; autoprotonation constant = [H3O+][OH-]/[H2O]2 = Kw/[H2O]2 = 10-14/(55.6)2 = 3.24×10-18.
Teacher's Note: Dissociation constant divides Kw by [H2O] = 55.6 M; autoprotonation divides by [H2O]2.
Exam Note: Water's molarity 55.6 M appears in the denominator.
Question 29. Will the pH of water be same at 4°C and 25°C? Explain. (IIT 2003)
Solution. At 25°C, Kw for H2O = 10-14. Thus [H+] = [OH-] = 10-7 or pH of water = 7. Also as the temperature decreases Kw for water decrease (i.e., Kw < 10-14) because of low dissociation of water (H2O ⇌ H+ + OH-; ΔH = +ve) following Le Chatelier's principle. This leads to lower concentrations of H+ and OH- ions. Thus pH of water is more at 4°C than at 25°C, however H2O remains neutral.
Teacher's Note: Ionisation of water is endothermic, so cooling lowers Kw, lowers [H+], raises pH.
Exam Note: Name Le Chatelier and say water stays neutral.
Question 30. The pH of pure water at 25°C and 35°C are 7 and 6 respectively. Calculate the heat of formation of water from H+ and OH-.
Solution. At 25°C: [H+] = 10-7, Kw = 10-14. At 35°C: [H+] = 10-6, Kw = 10-12. Using 2.303 log10(Kw2/Kw1) = (ΔH/R)[(T2-T1)/(T1×T2)]: 2.303 log10(10-12/10-14) = (ΔH/R)[10/(298×308)], giving ΔH = 84551.4 cal/mol = 84.551 kcal/mol (the book takes R = 2 cal K-1 mol-1). Thus H2O ⇌ H+ + OH-; ΔH = 84.551 kcal/mol. H+ + OH- ⇌ H2O; ΔH = -84.551 kcal/mol.
Teacher's Note: Van't Hoff relation between Kw at two temperatures gives ΔH of ionisation; formation from ions has opposite sign.
Exam Note: Reverse the sign for formation from H+ and OH-.
Question 31. A solution of HCl has a pH = 5. If one mL of it is diluted to 1 litre, what will be pH of resulting solution?
Solution. HClI = 10-5 M since pH = 5. Meq. of HClI in 1 mL = 10-5×1; meq. of HClII in 1000 mL = N×1000. Since II is prepared by diluting I and meq. does not change on dilution, i.e., meq. of HCl (concentrated) = meq. of HCl (dilute): 10-5×1 = N×1000, so NHClII = 10-8. Now, proceed as in problem 17 part 5 (water's own H+ must be included): pH = 6.9788.
Teacher's Note: Dilution keeps milliequivalents fixed: 10-5×1 = N×1000 gives 10-8 N; then the 10-8 N HCl method.
Exam Note: Acid never gives pH above 7; include water's H+.
Question 32. 2.0 g of diborane (B2H6) reacts with water to produce 100 mL solution. If Ka for H3BO3 is 7.3×10-10, calculate pH of solution.
Solution. B2H6 + 6H2O → 2H3BO3 + 3H2. 1 mole (= 27.6 g) of B2H6 = 2 mole H3BO3, so 2.0 g of B2H6 = 2×2/27.6 = 0.145 mole H3BO3. [H3BO3] = 0.145×1000/100 = 1.45 M. Now H3BO3 + H2O ⇌ B(OH)4- + H+; Ka = Cα2/(1-α) = Cα2 (1-α ≈ 1), so 7.3×10-10 = 1.45×α2, α = 2.24×10-5. [H+] = Cα = 1.45×2.24×10-5 = 3.25×10-5 M; pH = 4.4881.
Teacher's Note: One B2H6 gives two H3BO3; then weak acid pH = ½(pKa - log C).
Exam Note: Mole ratio 1:2 from the balanced equation is the key step.
Question 33. 100 mL of HCl gas at 25°C and 740 mm pressure were dissolved in one litre of water. Calculate the pH of solution. Given, V.P. of H2O at 25°C is 23.7 mm.
Solution. For HCl gas PV = nRT. PHCl(dry) = (740 - 23.7)/760 atm, V = 100/1000 litre, T = 25 + 273 = 298 K. Mole of HCl, nHCl = PV/RT = (740 - 23.7)×100/(760×1000×0.0821×298) = 3.85×10-3. Molarity of HCl = n/Vsolution = 3.85×10-3/1 (V in litre). [H+] = 3.85×10-3 M; pH = -log 3.85×10-3 = 2.4142 (≈ 2.41).
Teacher's Note: Gas collected over water: subtract water's vapour pressure (23.7 mm) to get the dry HCl pressure.
Exam Note: Use P(dry) = 740 - 23.7 mm; volume of solution 1 L.
Question 34. Find the concentrations of H+, HCO3- and CO32- in a 0.01 M solution of carbonic acid if the pH of solution is 4.18. K1 = 4.45×10-7, K2 = 4.69×10-11.
Solution. pH = 4.18 = -log[H+], so [H+] = 6.61×10-5 mol litre-1. H2CO3 ⇌ H+ + HCO3-; K1 = [H+][HCO3-]/[H2CO3], or 4.45×10-7 = [6.61×10-5][HCO3-]/[0.01], so [HCO3-] = 6.73×10-5 mol litre-1. For dissociation of HCO3-: HCO3- ⇌ H+ + CO32-; K2 = [H+][CO32-]/[HCO3-], or 4.69×10-11 = [6.61×10-5][CO32-]/[6.73×10-5], so [CO32-] = 4.78×10-11 mol litre-1.
Teacher's Note: With [H+] fixed by the given pH, use K1 then K2 in sequence.
Exam Note: Take [H+] from the given pH, not from the acid.
Question 35. Calculate the [Cl-], [Na+], [H+], [OH-] and pH of resulting solution obtained by mixing 50 mL of 0.6 N HCl and 50 mL of 0.3 N NaOH.
Solution. HCl + NaOH → NaCl + H2O. Meq. before reaction: 50×0.6 = 30; 50×0.3 = 15. Meq. after reaction: 15 (HCl left), 0, 15 (NaCl), 0. For monovalent electrolytes molarity = normality = milli equivalent/total volume. [Cl-] = (15+15)/100 = 0.3 M (Cl- provided by HCl and NaCl); [Na+] = 15/100 = 0.15 M; [H+] = 15/100 = 0.15 M; [OH-] = 10-14/[H+] = 10-14/0.15 = 6.6×10-14 M; pH = -log 0.15 = 0.8239.
Teacher's Note: Work in milliequivalents; excess HCl sets [H+]; Cl- comes from both HCl and NaCl.
Exam Note: Divide milliequivalents by total volume 100 mL.
Question 36. Calculate the pH of solution obtained by mixing 10 mL of 0.1 M HCl and 40 mL of 0.2 M H2SO4.
Solution. Milli equivalent of H+ from HCl = 10×0.1 = 1. Milli equivalent of H+ from H2SO4 = 40×0.2×2 = 16. Total meq. of H+ in solution = 1 + 16 = 17. [H+] = 17/50 = 3.4×10-1 ([H+] = Meq./V in mL). pH = -log 0.34 = 0.4685.
Teacher's Note: H2SO4 gives 2 H+ per mole (16 meq); add HCl's 1 meq; divide by 50 mL.
Exam Note: Remember the factor 2 for H2SO4.
Question 37. What is the pH of 1 M solution of acetic acid? To what volume one litre of this solution be diluted so that pH of the resulting solution will be twice of the original value? Ka = 1.8×10-5. (IIT 1990)
Solution. Case I: CH3COOH ⇌ CH3COO- + H+; 1, 0, 0 → 1-α, α, α. [H+] = Cα = C√(Ka/C) = √(KaC) = √(1.8×10-5×1) = 4.24×10-3; pH = 2.3724.
Case II: New pH is given as = 2.3724×2 = 4.7448. Let new conc. be C1 and degree of dissociation be α1. -log[H+] = 4.7448, so [H+] = 1.8×10-5, or C1α1 = 1.8×10-5. Again Ka = [H+][CH3COO-]/[CH3COOH] = C1α1×C1α1/C1(1-α1) = C1α1·α1/(1-α1), so 1.8×10-5 = 1.8×10-5×α1/(1-α1), α1 = 0.5. Now C1α1 = 1.8×10-5, so C1 = 1.8×10-5/0.5 = 3.6×10-5 M. Let 1 litre of conc. solution be diluted to V litre. Eq. of dilute solution = Eq. of concentration solution: 3.6×10-5×V = 1×1, so V = 1/(3.6×10-5) ≈ 2.78×104 litre (the book prints 2.77×104 litre). Note: In II case α1 comes 0.5 by Ka = C1α12/(1-α1) and thus, it is not advisable to assume (1-α1) ≈ 1.
Teacher's Note: At extreme dilution α = 0.5, so the approximation 1-α ≈ 1 fails; use full Ka expression.
Exam Note: Moles of acid are conserved on dilution: C1V = 1 mol.
Question 38. Calculate the pH of a solution which contains 100 mL 0.1 M HCl and 9.9 mL of 1.0 N NaOH.
Solution. HCl + NaOH → NaCl + H2O. Meq. before reaction: 100×0.1 = 10; 9.9×1 = 9.9. Meq. after reaction: 0.1, 0, 9.9, 9.9. [H+] left from HCl = 0.1/109.9 = 9.099×10-4 M; pH = -log 9.099×10-4 = 3.0409.
Teacher's Note: Near neutralisation, subtract meq (10 - 9.9 = 0.1) then divide by total volume 109.9 mL.
Exam Note: Total volume is 100 + 9.9 mL, not 100 mL.
Question 39. What will be the resultant pH when 200 mL of an aqueous solution of HCl (pH = 2.0) is mixed with 300 mL of an aqueous solution of NaOH (pH = 12.0)? (IIT 1998)
Solution. pH of HCl = 2, so [HCl] = 10-2 M; pH of NaOH = 12, so [NaOH] = 10-2 M. HCl + NaOH → NaCl + H2O; meq. before reaction 200×10-2 = 2 and 300×10-2 = 3; meq. after reaction 0, 1, 2, 2. [OH-] left from NaOH = 1/500 = 2×10-3 M; pOH = -log 2×10-3 = 2.6989; pH = 11.3010.
Teacher's Note: Convert pH to concentrations, then neutralise in meq; NaOH is in excess so pOH comes first.
Exam Note: Total volume 500 mL; excess is 1 meq NaOH.
Question 40. 500 mL of 0.2 M aqueous solution of acetic acid is mixed with 500 mL of 0.2 M HCl at 25°C. (i) Calculate the degree of dissociation of acetic acid in the resulting solution and pH of the solution. (ii) If 6 g of NaOH is added to the above solution, determine the final pH. [Assume there is no change in volume on mixing; Ka of acetic acid is 1.75×10-5 mol L-1.] (IIT 2002)
Solution. (i) Meq. of CH3COOH = 500×0.2 = 100; meq. of HCl = 500×0.2 = 100. [HCl] = 100/1000 = 0.1; [CH3COOH] = 100/1000 = 0.1. For CH3COOH: CH3COOH ⇌ CH3COO- + H+; before dissociation 0.1, 0, 0.1 (from HCl); after dissociation (0.1-x), x, (0.1+x). Ka = [CH3COO-][H+]/[CH3COOH] = x(0.1+x)/(0.1-x). Due to common ion effect dissociation of CH3COOH is very small in presence of HCl. Therefore (0.1+x) = 0.1 and (0.1-x) = 0.1: Ka = x×0.1/0.1, so x = Ka = 1.75×10-5. Degree of dissociation α = x/0.1 = 1.75×10-5/0.1 = 1.75×10-4 = 0.000175 = 0.0175%. Also [H+] = 0.1 + x = 0.1 (x << 0.1), pH = -log 0.1 = 1.
(ii) Eq. of NaOH or mole of NaOH added = 6/40 = 0.15. Therefore, new equilibrium will have CH3COOH + HCl + NaOH → CH3COONa + NaCl + H2O; 0.1, 0.1, 0.15 → 0.05 CH3COOH left, 0.05 CH3COONa, 0, 0 (the strong acid HCl is neutralised first). Thus, the solution will act as acidic buffer having [CH3COOH] = 0.05 M and [CH3COONa] = 0.05 M. pH = -log Ka + log [Conjugate base]/[Acid] = -log 1.75×10-5 + log(0.05/0.05); pH = 4.757.
Teacher's Note: HCl is a common-ion; later NaOH removes HCl first, leaving a 1:1 acetic acid/acetate buffer.
Exam Note: Strong acid is neutralised before the weak acid.
Question 41. An aqueous solution of aniline of concentration 0.24 M is prepared. What concentration of sodium hydroxide is needed in this solution so that anilinium ion concentration remains at 1×10-8 M? Ka for C6H5NH3+ is 2.4×10-5 M. (Roorkee 1996)
Solution. C6H5NH2 + H2O ⇌ C6H5NH3+ + OH-. Kb = [C6H5NH3+][OH-]/[C6H5NH2] ...(1). Also Kb for C6H5NH2 = Kw/Ka for C6H5NH3+ = 1×10-14/(2.4×10-5) ...(2). Since dissociation of C6H5NH2 occurs in presence of NaOH and thus dissociation of C6H5NH2 will suppress: [OH-] = ?; [C6H5NH2] = 0.24; [C6H5NH3+] = 10-8. Therefore 1×10-14/(2.4×10-5) = 10-8×[OH-]/0.24, so [OH-] = 0.24×10-14/(2.4×10-5×10-8) = 0.01; [NaOH] = 0.01 M.
Teacher's Note: Get Kb of aniline from Kw/Ka of its conjugate acid; added OH- suppresses ionisation (common ion).
Exam Note: Aniline stays ≈ 0.24 M because NaOH suppresses its ionisation.
Question 42. Calculate [H+] in a solution containing 0.1 M HCOOH and 0.1 M HOCN. Ka for HCOOH and HOCN are 1.8×10-4 and 3.3×10-4.
Solution. In this problem both the acids contribute for [H+] due to appreciable dissociation. HCOOH ⇌ H+ + HCOO-: (x+y), x; HOCN ⇌ H+ + OCN-: (x+y), y. Because [H+] will remain common in solution, KHCOOH = [H+][HCOO-]/[HCOOH] = 1.8×10-4 ...(1); KHOCN = [H+][OCN-]/[HOCN] = 3.3×10-4 ...(2); or KHCOOH = (x+y)x/0.1 = 1.8×10-4 ...(3), KHOCN = (x+y)y/0.1 = 3.3×10-4 ...(4). Thus, by Eqs. (3) and (4), x/y = 1.8/3.3, or y = 1.83x ...(5). From Eq. (3): (x + 1.83x)·x = 1.8×10-5, x = 2.52×10-3. Therefore y = 4.61×10-3. Thus [H+] = x + y = 2.52×10-3 + 4.61×10-3 = 7.13×10-3 M.
Teacher's Note: Two comparable weak acids share one [H+]; the ratio of anions equals the ratio of Ka.
Exam Note: Total [H+] = sum of both anion concentrations.
Question 43. What is the concentration of acetic acid which has same pH as 0.5 M HCOOH solution. Ka HCOOH = 2.4×10-4 and Ka CH3COOH = 1.8×10-5.
Solution. HCOOH ⇌ H+ + HCOO-; CH3COOH ⇌ H+ + CH3COO-. Since both have same pH and therefore [H+] by HCOOH = [H+] by CH3COOH: C1α1 = C2α2, √(Ka1C1) = √(Ka2C2). So √(2.4×10-4×0.5) = √(1.8×10-5×C), hence CCH3COOH = 6.666 M.
Teacher's Note: Same pH means same [H+] = √(KaC), so Ka1C1 = Ka2C2.
Exam Note: Equate Ka×C for the two acids.
Question 44. What are [H+], [A-] and [B-] in a solution that is 0.03 M HA and 0.1 M HB ? Ka for HA and HB are 1.38×10-4 and 1.05×10-10 respectively.
Solution. HA ⇌ H+ + A-; Ka = 1.38×10-4. HB ⇌ H+ + B-; Ka = 1.05×10-10. It is thus evident on account of low Ka values for HB, [H+] from HB is appreciably small in comparison to [H+] from HA and thus may be neglected. For HA: Ka = [H+][A-]/[HA] = [H+]2/[HA], so [H+]2 = 1.38×10-4×[HA] = 1.38×10-4×0.03. Therefore [H+] = [A-] = 2.04×10-3 M. Now for HB: Ka = [H+][B-]/[HB], 1.05×10-10 = 2.04×10-3×[B-]/0.1 (since [H+] is provided by acid HA and HB is almost undissociated), so [B-] = 5.15×10-9 M.
Teacher's Note: HA's far larger Ka fixes [H+]; HB then dissociates only in presence of that H+.
Exam Note: Neglect H+ from the very weak HB, and say so.
Question 45. Calculate [H+], pH, [CH3COO-] and [C7H5O2-] in a solution containing 0.02 M CH3COOH and 0.01 M C6H5COOH. KCH3COOH = 1.8×10-5 and KC6H5COOH = 6.4×10-5.
Solution. CH3COOH ⇌ CH3COO- + H+; C6H5COOH ⇌ C6H5COO- + H+. [H+] = √(Ka1·C1 + Ka2·C2) = √(1.8×10-5×0.02 + 6.4×10-5×0.01) = 1×10-3, so pH = 3. Also Ka = [CH3COO-][H+]/[CH3COOH]: 1.8×10-5 = [CH3COO-]×(1×10-3)/0.02, so [CH3COO-] = 3.6×10-4. Similarly, [C6H5COO-] = 6.4×10-4.
Teacher's Note: Mixture of weak acids: [H+]2 = ΣKaC; then each anion = KaC/[H+].
Exam Note: Add KaC terms of both acids under one root.
Question 46. What concentration of HCOO- is present in a solution of 0.015 M HCOOH and 0.02 M HCl. Ka HCOOH = 1.8×10-4.
Solution. Given [HCOOH] = 0.015 M, [HCl] = 0.02 M, so [H+] in solution = 0.02 M. The dissociation of HCOOH is suppressed due to common ion effect in presence of HCl. The [H+] is provided by HCl in solution. HCOOH ⇌ HCOO- + H+; Ka = [H+][HCOO-]/[HCOOH], 1.8×10-4 = [0.02][HCOO-]/[0.015], so [HCOO-] = 1.35×10-4 M.
Teacher's Note: HCl's 0.02 M H+ is the common ion; formic acid stays undissociated, [HCOOH] ≈ 0.015.
Exam Note: Take [H+] from HCl alone.
Question 47. A solution contains 0.1 M H2S and 0.3 M HCl. Calculate the conc. of S2- and HS- ions in solution. Given Ka1 and Ka2 for H2S are 10-7 and 1.3×10-13 respectively. (Roorkee 1992)
Solution. H2S ⇌ H+ + HS-; Ka1 = 10-7. HS- ⇌ H+ + S2-; Ka2 = 1.3×10-13. HCl → H+ + Cl-. Due to common ion effect the dissociation of H2S is suppressed and the [H+] in solution is due to HCl. Ka1 = [H+][HS-]/[H2S]: 10-7 = [0.3][HS-]/[0.1] ([H+] from HCl = 0.3), so [HS-] = 3.3×10-8 M. Further Ka2 = [H+][S2-]/[HS-]: 1.3×10-13 = [0.3][S2-]/(3.3×10-8), so [S2-] = 1.43×10-20 M.
Teacher's Note: Strong acid fixes [H+] = 0.3; apply Ka1 then Ka2 in sequence.
Exam Note: Use Ka1 first, then Ka2 with [HS-].
Question 48. The Ka for formic acid and acetic acid are 2.1×10-4 and 1.1×10-5 respectively. Calculate relative strength of acids.
Solution. Relative strength of weak acids = √((Ka1/Ka2)×(C1/C2)). Assume C1 and C2 are same (although not given). Relative strength = √(Ka1/Ka2) = √(2.1×10-4/1.1×10-5) ≈ 4.37 : 1 for HCOOH to CH3COOH (the book prints 4.36 : 1).
Teacher's Note: For equal concentrations, strength ratio = √(Ka1/Ka2), not Ka1/Ka2.
Exam Note: State the equal-concentration assumption.
Question 49. Calculate the pH of a solution of given mixtures: (a) (2 g CH3COOH + 3 g CH3COONa) in 100 mL of mixture; Ka = 1.8×10-5. (b) 5 mL 0.1 M NH4OH + 250 mL of 0.1 M NH4Cl; Kb = 1.8×10-5. (c) (0.25 mole of acid + 0.35 mole of salt) in 500 mL mixture; Ka = 3.6×10-4. (Roorkee 1992)
Solution. (a) pH = -log Ka + log [Conjugate base]/[Acid]. [Conjugate base] = 3×1000/(82×100) M and [Acid] = 2×1000/(60×100) M. pH = -log 1.8×10-5 + log[(3×1000/(82×100))/(2×1000/(60×100))], pH = 4.7851.
(b) pOH = -log Kb + log [Conjugate acid]/[Base]. Total volume after mixing = 250 + 5 = 255 mL; meq. of conjugate acid = 250×0.1 = 25; meq. of base = 5×0.1 = 0.5. [Conjugate acid] = 25/255 and [Base] = 0.5/255. pOH = -log 1.8×10-5 + log[(25/255)/(0.5/255)] = 6.4437, pH = 14 - pOH = 7.5563.
(c) pH = -log Ka + log [Anion]/[Acid] = -log 3.6×10-4 + log[(0.35/500)/(0.25/500)], pH = 3.5898.
Teacher's Note: Henderson equation: ratio of salt to acid (or base) matters; volume cancels when both share the same total volume.
Exam Note: Convert grams to moles first (CH3COONa = 82 g/mol).
Question 50. Calculate the pH of a buffer solution prepared by dissolving 30 g of Na2CO3 in 500 mL of an aqueous solution containing 150 mL of 1 M HCl. Ka for HCO3- = 5.63×10-11.
Solution. Na2CO3 + HCl → NaCl + NaHCO3. Meq. before reaction: (30/106)×1000 = 283 and 150×1 = 150, 0, 0. Meq. after reaction: 133, 0, 150, 150. The solution contains Na2CO3 and HCO3- and thus acts as buffer. pH = -log Ka + log [CO32-]/[HCO3-] = -log 5.63×10-11 + log(133/150) = 10.249 - 0.052, pH = 10.197.
Teacher's Note: HCl converts part of carbonate to bicarbonate; the remaining CO32-/HCO3- pair is the buffer, using Ka of HCO3-.
Exam Note: Subtract HCl moles from carbonate before Henderson.
Question 51. 0.15 mole of pyridinium chloride has been added into 500 cm3 of 0.2 M pyridine solution. Calculate pH and hydroxyl ion concentration in the resulting solution assuming no change in volume. (Kb for pyridine = 1.5×10-9 M) (Roorkee 1995)
Solution. [Pyridinium chloride] = (0.15/500)×1000 = 0.3 M; [Pyridine] = 0.2 M. A mixture of pyridine and its salt pyridinium chloride forms a basic buffer and therefore pOH = -log Kb + log [Conjugate acid]/[Base], or pOH = -log 1.5×10-9 + log(0.30/0.20) = -log 1.5 + 9 log 10 + log 1.5 = 9. Hence [OH-] = 10-9 M and [H+] = 10-5, so pH = 5.
Teacher's Note: Weak base plus its salt is a basic buffer; Henderson in pOH form; ratio 0.3/0.2 cancels Kb digits.
Exam Note: Use pOH = pKb + log(salt/base).
Question 52. Calculate the mass of (NH4)2SO4 to be added to 500 mL of 0.2 M NH3 to yield a solution of pH = 9.35. Kb for NH3 = 1.78×10-5.
Solution. pOH = -log Kb + log [Conjugate acid]/[Base] = -log Kb + log [NH4+]/[NH4OH]. [NH4+] is obtained from salt (NH4)2SO4. pH = 9.35, so pOH = 14 - 9.35 = 4.65. Millimole of NH4OH in solution = 0.2×500 = 100. Let millimole of NH4+ added in solution = a. [NH4+] = a/500; [NH4OH] = 100/500. 4.65 = -log 1.78×10-5 + log[(a/500)/(100/500)] = 4.7496 + log(a/100), so a = 79.51. Millimole of (NH4)2SO4 added = a/2 = 79.51/2 = 39.755. (w/132)×1000 = 39.755, so w(NH4)2SO4 = 5.248 g.
Teacher's Note: Each (NH4)2SO4 supplies two NH4+; so moles of salt = half of NH4+ needed.
Exam Note: Divide NH4+ by 2 before using M = 132.
Question 53. What volume of 0.1 M sodium formate solution should be added to 50 mL of 0.05 M formic acid to produce a buffer solution of pH = 4.0; pKa of formic acid = 3.80? (Roorkee 1990)
Solution. Let V mL of 0.1 M HCOONa be mixed to 50 mL of 0.05 M HCOOH. [Molarity] = Total millimole/Total volume. In mixture [HCOONa] = 0.1×V/(V+50); [HCOOH] = 50×0.05/(V+50). pH = -log Ka + log [Conjugate base]/[Acid], so 4.0 = 3.80 + log[(0.1×V)/(V+50)]/[2.5/(V+50)], giving V = 39.62 mL.
Teacher's Note: Both species dilute to the same total volume, so the ratio is millimoles of salt to millimoles of acid.
Exam Note: Volume cancels; ratio 0.1V/2.5 = 100.2.
Question 54. How many mole of HCl will be required to prepare one litre of buffer solution (containing NaCN + HCl) of pH 8.5 using 0.01 g formula mass of NaCN. KHCN = 4.1×10-10.
Solution. NaCN + HCl is not a buffer but if HCl is in less mass then, it gives a buffer as it produces HCN. NaCN + HCl → NaCl + HCN; mole added 0.01, a, 0, 0; mole after reaction (0.01 - a), 0, a, a. This is buffer of HCN + NaCN. Let a mole of HCl be used for this purpose. pH = -log Ka + log (0.01 - a)/a: 8.5 = -log 4.1×10-10 + log (0.01 - a)/a, so a = 8.85×10-3 mol of HCl.
Teacher's Note: HCl converts part of NaCN to HCN, giving a CN-/HCN buffer; salt left 0.01 - a, acid formed a.
Exam Note: HCl must be limiting or no buffer forms.
Question 55. A 40 mL solution of weak base BOH is titrated with 0.1 N HCl solution. The pH of solution is found to be 10.04 and 9.14 after the addition of 5.0 mL and 20.0 mL of acid respectively. Find out Kb for weak base. (IIT 1991)
Solution. Case I: BOH + HCl → BCl + H2O. Millimole before reaction: a, 0.1×5 = 0.5, 0, 0; after reaction: (a - 0.5), 0, 0.5, 0.5. pH = 10.04, so pOH = 3.96 = -log Kb + log [B+]/[BOH] ...(1), i.e. 3.96 = -log Kb + log 0.5/(a - 0.5) ...(2).
Case II: BOH + HCl → BCl + H2O. Millimole before reaction: a, 0.1×20 = 2; after reaction (a - 2), 0, 2, 2. pH = 9.14, so pOH = 4.86 = -log Kb + log [B+]/[BOH] ...(3), i.e. 4.86 = -log Kb + log 2/(a - 2) ...(4).
Solving Eqs. (2) and (4): a = 3.52 millimole, pKb = 4.741, Kb = 1.81×10-5.
Teacher's Note: Two titration points give two Henderson equations; subtracting eliminates Kb to find base moles a.
Exam Note: Treat each point as a basic buffer in milli-moles.
Question 56. A weak acid HA after treatment with 12 mL of 0.1 M strong base BOH has a pH of 5. At the end point, the volume of same base required is 26.6 mL. Calculate Ka of acid.
Solution. For neutralization: Total meq. of acid = meq. of base = 26.6×0.1 = 2.66. Now for partial neutralization of acid: HA + BOH → BA + H2O; meq. before reaction 2.66, 1.2, 0, 0; meq. after reaction 1.46, 0, 1.2, 1.2. The resultant mixture acts as a buffer and [HA] and [BA] may be placed in terms of meq. since volume of mixture is constant. pH = -log Ka + log [Conjugate base]/[Acid], or 5 = -log Ka + log (1.2/1.46), so Ka = 8.219×10-6.
Teacher's Note: End-point volume gives total acid (2.66 meq); partial neutralisation leaves a buffer of 1.46 meq HA and 1.2 meq A-.
Exam Note: Use meq directly; volumes cancel in the ratio.
Question 57. A solution of weak acid was titrated with base NaOH. The equivalence point was reached when 36.12 mL of 0.1 M NaOH have been added. Now 18.06 mL 0.1 M HCl were added to titrated solution, the pH was found to be 4.92. What is Ka of acid?
Solution. For complete neutralization: meq. of acid = meq. of NaOH = 36.12×0.1 = 3.612. HA + NaOH → NaA + H2O; 3.612, 3.612, 0, 0 → 0, 0, 3.612, 3.612. Now 1.806 meq. of HCl (18.06×0.1) are added to this solution containing 3.612 meq. of NaA: NaA + HCl → NaCl + HA; meq. before reaction 3.612, 1.806, 0, 0; meq. after reaction 1.806, 0, 1.806, 1.806. The solution has HA and NaA and thus acts as buffer. pH = -log Ka + log(1.806/1.806), so 4.92 = -log Ka, Ka = 1.2×10-5.
Teacher's Note: Adding half the equivalent HCl to NaA gives equal HA and A-, so pH = pKa.
Exam Note: Half-neutralisation point: pH = pKa.
Question 58. Calculate [H+] in a 0.20 M solution of dichloroacetic acid (Ka = 5×10-2) that also contains 0.1 M sodium dichloroacetate. Neglect hydrolysis of sodium salt.
Solution. CHCl2·COOH ⇌ CHCl2·COO- + H+; before dissociation 0.2, -, -; after dissociation (0.2 - x), x, x. CHCl2·COONa → CHCl2COO- + Na+; 0.1, 0.1. For the dissociation of the acid: Ka = 5×10-2 = [CHCl2COO-][H+]/[CHCl2COOH], or 0.05 = [0.1 + x][x]/[0.2 - x]. Solving (x2 + 0.15x - 0.01 = 0): x = 0.05, i.e. [H+] = 0.05 M.
Teacher's Note: Ka is large, so Henderson shortcuts fail; solve the quadratic x2 + 0.15x - 0.01 = 0.
Exam Note: Do not neglect x against 0.1 or 0.2 here.
Question 59. Calculate the change in pH of 1 litre buffer solution containing 0.1 mole each of NH3 and NH4Cl upon addition of: (i) 0.02 mole of dissolved gaseous HCl. (ii) 0.02 mole of dissolved NaOH. Assume no change in volume. KNH3 = 1.8×10-5. (Roorkee 1992)
Solution. Initial pH of solution when [NH3] = 0.1/1 and [NH4Cl] = 0.1/1: pOH = -log 1.8×10-5 + log(0.1/0.1) = 4.7447, so pH = 9.2553.
(i) Now 0.02 mole of HCl are added: HCl + NH4OH → NH4Cl + H2O; mole before reaction 0.02, 0.1, 0.1; after reaction 0, 0.08, (0.1 + 0.02). Volume = 1 litre, so [NH4OH] = 0.08/1 and [NH4Cl] = 0.12/1. pOH1 = -log 1.8×10-5 + log(0.12/0.08) = 4.9208, pH1 = 9.0792. Change in pH = pH - pH1 = 9.2553 - 9.0792 = +0.1761. Change in pH = 0.1761 unit, i.e., pH decreases.
(ii) Now 0.02 mole of NaOH are added: NaOH + NH4Cl → NaCl + NH4OH; mole before reaction 0.02, 0.1, 0, 0.08; after reaction 0, 0.08, 0.02, 0.12. pOH2 = -log 1.8×10-5 + log(0.08/0.12) = 4.5686, pH2 = 9.4314. Change in pH = pH - pH2 = 9.2553 - 9.4314 = -0.1761. Change in pH = 0.1761 unit, i.e., pH increases.
Teacher's Note: Acid converts NH3 to NH4+ (pH falls), base does the reverse (pH rises); equal magnitude here since the ratio inverts.
Exam Note: Update both buffer components after each addition.
Question 60. 20 mL of 0.2 M NaOH are added to 50 mL of 0.2 M acetic acid (Ka = 1.8×10-5). (1) What is pH of solution ? (2) Calculate volume of 0.2 M NaOH required to make the pH of solution 4.74.
Solution. (1) NaOH + CH3COOH → CH3COONa + H2O. Millimole added: 20×0.2 = 4, 50×0.2 = 10, 0, 0; millimole after reaction 0, 6, 4, 4. [Molarity] = millimole/total volume, so [CH3COOH] = 6/70 and [CH3COONa] = 4/70. pH = -log 1.8×10-5 + log[(4/70)/(6/70)], pH = 4.5686.
(2) Let V mL of 0.2 M NaOH be required to make pH 4.74. NaOH + CH3COOH → CH3COONa + H2O; millimole added 0.2×V, 50×0.2 = 10, 0, 0; millimole after reaction 0, (10 - 0.2V), 0.2V, 0.2V. [Acid] = (10 - 0.2V)/(50+V); [Conjugate base] = 0.2V/(50+V). 4.74 = -log 1.8×10-5 + log[(0.2V)/(50+V)]/[(10 - 0.2V)/(50+V)] (take -log 1.8×10-5 = 4.7447 ≈ 4.74), so V = 25 mL (half-neutralisation, pH = pKa).
Teacher's Note: Part 1: buffer of 4 meq salt, 6 meq acid; part 2: half-neutralisation, pH = pKa.
Exam Note: pH = pKa means half the acid is neutralised.
Question 61. Calculate the ratio of pH of a solution containing 1 mole of CH3COONa + 1 mole of HCl per litre and of other solution containing 1 mole CH3COONa + 1 mole acetic acid per litre.
Solution. Case I: pH when 1 mole CH3COONa and 1 mole HCl are present. CH3COONa + HCl → CH3COOH + NaCl; before reaction 1, 1, 0, 0; after reaction 0, 0, 1, 1. [CH3COOH] = 1 M. [H+] = C·α = C√(Ka/C) = √(Ka·C) = √Ka (C = 1), so pHI = -½ log Ka = ½ pKa. Case II: pH when 1 mole CH3COONa and 1 mole CH3COOH; a buffer solution. pH2 = -log Ka + log([Conjugate base]/[Acid]) with [Salt] = [Anion] = 1 M and [Acid] = 1 M, so pH2 = pKa. Therefore pHI/pH2 = 1/2.
Teacher's Note: Case I gives 1 M weak acid (pH = ½pKa); case II is a 1:1 buffer (pH = pKa).
Exam Note: Ratio is ½; Ka cancels.
Question 62. A 0.1 M solution of weak acid HA is 1% dissociated at 25°C. What is its Ka ? If this solution is w.r.t. NaA 0.2 M, what will be the new degree of dissociation of HA and pH ?
Solution. For weak acid HA: αHA = 1/100 = 0.01, [HA] = 0.1 M. Ka = Cα2 = 0.1×(0.01)2 = 10-5. Now 0.2 M NaA, a salt of HA, is added to it, resulting in a buffer solution of [HA] = 0.1 M and [NaA] = 0.2 M: pH = -log 10-5 + log(0.2/0.1), pH = 5.3010. Also HA ⇌ H+ + A-; 1, 0, 0 → (1-α), α, α. [A-] is provided by NaA since dissociation of NaA in presence of HA is suppressed due to a common ion effect: Ka = [H+][A-]/[HA] = (C·α)×0.2/C(1-α) = 10-5, so α = 5×10-5.
Teacher's Note: Initial Ka from 1% dissociation; adding NaA gives a buffer and suppresses α by common ion effect.
Exam Note: Anion concentration is almost entirely from the salt.
Question 63. The [H+] in 0.2 M solution of formic acid is 6.4×10-3 mol litre-1. To this solution formate is added so as to adjust the conc. of sodium formate to one mol per litre. What will be pH of this solution? Ka for HCOOH is 2.4×10-4 and degree of dissociation of HCOONa is 0.75.
Solution. In 0.2 M HCOOH [H+] = 6.4×10-3, so Cα = 6.4×10-3, α = 3.2×10-2. Now sodium formate is added and the dissociation will further be suppressed and therefore, new degree of dissociation (α1) for HCOOH in presence of HCOONa is so small that it may be neglected, i.e. [HCOOH] after dissociation = [HCOOH] before dissociation = 0.2. HCOONa → HCOO- + Na+; conc. before dissociation 1, 0, 0; after dissociation (1 - 0.75), 0.75, 0.75. So [HCOOH] = 0.2, [HCOO-] = 0.75. pH = -log 2.4×10-4 + log(0.75/0.2) = 4.19.
Teacher's Note: Sodium formate is only 75% dissociated, so effective [HCOO-] is 0.75 M, not 1 M.
Exam Note: Use degree of dissociation of the salt for the anion.
Question 64. What is the pH of a solution when 0.20 mole of HCl is added to one litre solution containing. (a) 1 M each of acetic acid and acetate ion ? (b) 0.1 M each of acetic acid and acetate ion ? Given Ka for acetic acid is 1.8×10-5.
Solution. (a) Initially [Acetic acid] = 1 M, [Acetate] = 1 M. Now 0.2 mole of HCl are added to it: HCl + CH3COO- → CH3COOH + Cl-; mole before reaction 0.2, 1, 0; after reaction 0, 0.8, 0.2. Now [CH3COOH] = 1.2; [CH3COO-] = 0.8. pH = -log 1.8×10-5 + log(0.8/1.2) = 4.5686.
(b) In II case initially [Acetic acid] = 0.1 M, [Acetate] = 0.1 M. Now 0.2 mole of HCl are added to it: HCl + CH3COO- → CH3COOH + Cl-; mole before reaction 0.2, 0.1, 0.1, 0; after reaction 0.1, 0, 0.2. [H+] from free HCl = 0.1 = 10-1, so pH = 1. Note: CH3COOH no doubt gives H+ but being weak acid as well as in presence of HCl does not dissociate appreciably and thus, H+ from CH3COOH may be neglected.
Teacher's Note: 0.2 mol HCl is within the 1 M buffer's capacity but exceeds the 0.1 mol acetate in (b).
Exam Note: If acid exceeds acetate, pH comes from leftover HCl.
Question 65. Calculate the composition of an acidic buffer solution made up of HA and NaA of total molarity 0.29 having pH = 4.4 and Ka = 1.8×10-5.
Solution. pH = -log Ka + log [Conjugate base]/[Acid]. Let a mol litre-1 be concentration of salt, then concentration of acid = (0.29 - a). 4.4 = -log 1.8×10-5 + log[a/(0.29 - a)], so a = 0.09. [Salt] = 0.09 M; [Acid] = 0.29 - 0.09 = 0.20 M.
Teacher's Note: Let salt = a and acid = 0.29 - a in Henderson; solve for a.
Exam Note: Total molarity is the constraint: salt + acid = 0.29.
Question 66. Calculate the amount of NH3 and NH4Cl required to prepare a buffer solution of pH 9.0 when total concentration of buffering reagents is 0.6 mol litre-1. (Roorkee 1997)
Solution. pOH = -log Kb + log [Conjugate acid]/[Base]. With pOH = 14 - 9 = 5, taking pKb = 4.7 as in the book, 5 = 4.7 + log(a/b), so a/b = 2 and a = 2b. Given a + b = 0.6: 2b + b = 0.6, 3b = 0.6, so b = 0.2 mole or 0.2×17 = 3.4 g/L NH3; a = 0.4 mole or 0.4×53.5 = 21.4 g/L NH4Cl. Thus [Salt] = 0.4 M and [Base] = 0.2 M. (Using Kb = 1.8×10-5, pKb = 4.74, the amounts would be about 0.21 mole NH3 and 0.39 mole NH4Cl; the book rounds pKb to 4.7.)
Teacher's Note: Solve Henderson with a + b = 0.6; ratio salt/base = 10(pOH - pKb).
Exam Note: Kb of NH3 is not given; state the value assumed.
Question 67. Calculate the pH of a solution obtained by mixing 100 mL of 0.3 M HCl with 100 mL of 0.4 M NH3. pKa for NH4+ = 9.2552.
Solution. HCl + NH3 → NH4Cl; mm at t = 0: 30, 40, 0; mm after reaction: 0, 10, 30. pOH = pKb + log [NH4+]/[NH3] (pKa + pKb = 14) = 4.7448 + log(30/10) = 5.2218. pH = 14 - 5.2218 = 8.7782.
Teacher's Note: HCl is limiting: 30 mmol NH3 become NH4+ leaving 10 mmol NH3, a basic buffer.
Exam Note: pKb = 14 - pKa of NH4+.
Question 68. Calculate the pH of a solution obtained by mixing 50 mL of 0.2 M NH4Cl and 75 mL of 0.1 M NaOH. pKa for NH4+ = 9.2552.
Solution. NH4Cl + NaOH ⇌ NH4OH + NaCl; 50×0.2 = 10, 75×0.1 = 7.5, 0, 0; after reaction 2.5, 0, 7.5, 7.5. (pKa + pKb = 14) pOH = 4.7448 + log(2.5/7.5) = 4.2676. pH = 9.7324.
Teacher's Note: NaOH is limiting: it converts 7.5 mmol NH4+ to NH3, leaving 2.5 mmol NH4+.
Exam Note: Salt/base ratio is 2.5:7.5 in pOH form.
Question 69. A certain buffer solution contains equal concentration of X- and HX. Kb for X- is 10-10. Calculate pH of buffer.
Solution. Kb(X-) = 10-10. Also for conjugate acid-base pair Ka(HX)×Kb(X-) = 10-14, so Ka(HX) = 10-4. Now [HX] (acid) = [X-] (anion), so pH = -log Ka + log([Conjugate base]/[Acid]) = -log 10-4; pH = 4.
Teacher's Note: Equal acid and conjugate base gives pH = pKa; convert Kb to Ka via Kw.
Exam Note: Convert Kb to Ka before Henderson.
Question 70. Two buffer, (X) and (Y) of pH 4.0 and 6.0 respectively are prepared from acid HA and the salt NaA. Both the buffers are 0.50 M in HA. What would be the pH of the solution obtained by mixing equal volumes of the two buffers? (KHA = 1.0×10-5) (Roorkee 1999)
Solution. pH of buffer is given by: pH = -log Ka + log [Conjugate base]/[Acid]. Case I: 4 = -log 1.0×10-5 + log([Conjugate base]/0.5), so log([Conjugate base]/0.5) = -1 and [Conjugate base] = 0.1×0.5 = 0.05 M. Case II: 6 = -log 1.0×10-5 + log([Conjugate base]/0.5), so log([Conjugate base]/0.5) = 1 and [Conjugate base] = [Salt] = 10×0.5 = 5 M. Now the two buffers (I. NaA = 0.05 M and HA = 0.5 M) and (II. NaA = 5 M and HA = 0.5 M) are mixed in equal proportion. Thus new conc. of NaA in mixed buffer = (0.05×V + 5×V)/2V = 5.05/2; new conc. of HA in mixed buffer = (0.5×V + 0.5×V)/2V = 0.5 M. Thus pH = -log 1.0×10-5 + log[(5.05/2)/0.5] = 5 + 0.7033 = 5.7033.
Teacher's Note: Find salt concentration in each buffer first; mixing equal volumes averages concentrations, not pH values.
Exam Note: Never average the two pH values.
Question 71. A certain weak acid has Ka = 1.0×10-4. Calculate the equilibrium constant for its reaction with a strong base. (IIT 1991)
Solution. HA (weak) + BOH (strong) ⇌ BA + H2O, i.e. HA + B+ + OH- ⇌ B+ + A- + H2O, or HA + OH- ⇌ A- + H2O. K = [A-]/([HA][OH-]) ...(1). Also for weak acid HA: HA ⇌ H+ + A-; Ka = [H+][A-]/[HA] ...(2). By Eqs. (2) and (1), Ka/K = Kw, so K = Ka/Kw = 10-4/10-14 = 1010.
Teacher's Note: Net reaction HA + OH- ⇌ A- + H2O has K = Ka/Kw, so it goes essentially to completion.
Exam Note: Write the net ionic reaction before the K expression.
Question 72. The pH of blood stream is maintained by a proper balance of H2CO3 and NaHCO3 concentrations. What volume of 5 M NaHCO3 solution, should be mixed with 10 mL sample of blood which is 2 M in H2CO3 in order to maintain a pH of 7.4 in blood? Ka for H2CO3 in blood is 7.8×10-7? (IIT 1993)
Solution. [H2CO3] in blood = 2 M, volume of blood = 10 mL, [NaHCO3] = 5 M. Let volume of NaHCO3 used = V mL. [H2CO3] in mixture = 2×10/(V+10); [NaHCO3] in mixture = (5×V)/(V+10). pH = pKa + log [Conjugate base]/[Acid]: 7.4 = -log 7.8×10-7 + log[(5×V)/(V+10)]/[(2×10)/(V+10)], so V = 78.36 mL.
Teacher's Note: Henderson equation for the HCO3-/H2CO3 blood buffer; common volume cancels, leaving 5V/20.
Exam Note: Ratio of millimoles: 5V against 2×10.
Question 73. 0.1 M CH3COOH solution is titrated against 0.05 M NaOH solution. Calculate pH at 1/4th and 3/4th stages of neutralization of acid. The pH for 0.1 M CH3COOH is 3.
Solution. Ka for CH3COOH can be derived by [H+] = 10-3: Cα = 10-3, α = 10-3/0.1 = 10-2. Now Ka = Cα2 = 0.1×(10-2)2 = 10-5.
Case I: CH3COOH + NaOH → CH3COONa + H2O; before addition of NaOH 0.1; after addition of NaOH 0.1×3/4 acid and 0.1×1/4 salt (when 1/4 acid neutralizes). pH = -log Ka + log [Conjugate base]/[Acid] = -log 10-5 + log[(0.1/4)/(0.3/4)], pH = 4.5228.
Case II: after addition of NaOH 0.1×1/4 acid and 0.1×3/4 salt. For 3/4 neutralization pH = -log 10-5 + log[(0.3/4)/(0.1/4)], pH = 5.4771.
Teacher's Note: Ka comes from the given pH of the unneutralised acid (10-5); each stage is a 1:3 or 3:1 Henderson ratio.
Exam Note: Fraction neutralised gives salt:acid ratio directly.
Question 74. Ksp of AgCl is 1.5×10-10 at 25°C. Calculate solubility of AgCl in; (a) Pure water, (b) 0.1 M AgNO3, (c) 0.1 M NaCl. (Roorkee 1995)
Solution. (a) In pure water: let solubility of AgCl be s mol litre-1. AgCl(s) ⇌ Ag+(aq.) + Cl-(aq.); Ksp = [Ag+][Cl-] = s×s, so s = √Ksp = √(1.5×10-10) = 1.224×10-5 mol litre-1.
(b) In 0.1 M AgNO3: AgCl ⇌ Ag+ + Cl- (s, s); AgNO3 → Ag+ + NO3- (0.1, 0.1). Ksp = [Ag+][Cl-] = (0.1 + s)(s) (s <<< 0.1, presence of common ion decreases solubility), so s(0.1) = 1.5×10-10 and s = 1.5×10-9 mol litre-1.
(c) In 0.1 M NaCl: Corrected: the book's working for this part uses data that are not in the question (Ksp = 1.0×10-10, 0.01 M NaCl, Kf = 3×105) and does not reach an answer for 0.1 M NaCl. With the given Ksp, Cl- from NaCl is common: Ksp = s(0.1 + s) ≈ 0.1s, so s = 1.5×10-9 mol litre-1 (complex formation, e.g. AgCl + Cl- ⇌ [AgCl2]-, is ignored because no Kf is given). The book remarks that the solubility of AgCl is more in aqueous NaCl than AgNO3 only because of such complex formation.
Teacher's Note: Common ion (Ag+ or Cl-) suppresses solubility to Ksp/0.1; pure water gives √Ksp.
Exam Note: Neglect s next to 0.1 and say why.
Question 75. How many grams of potassium bromide (molar mass 120) can be added to 0.5 litre of 0.05 M solution of silver nitrate just to start the precipitation of AgBr? Ksp of AgBr is 5.0×10-13.
Solution. KBr + AgNO3 → AgBr + KNO3. Let a mole of KBr be added into 1 litre of 0.05 M AgNO3 to bring in precipitation. [Br-] = a and [Ag+] = 0.05, so [Ag+][Br-] = Ksp: 0.05×a = 5.0×10-13. Corrected: a = 5.0×10-13/0.05 = 1.0×10-11 M (the book prints 5×10-11, an arithmetic slip). Mass per litre = 1.0×10-11×120 = 1.2×10-9 g. For 0.5 litre of 0.05 M AgNO3: mass of KBr = 6.0×10-10 g.
Teacher's Note: Precipitation starts when [Ag+][Br-] = Ksp; then moles × 120 × 0.5 L.
Exam Note: Scale to 0.5 L at the end; check the division.
Question 76. The solubility of AgCl in water at 25°C is 1.79×10-3 g/litre. Calculate Ksp of AgCl at 25°C.
Solution. Solubility (s) of AgCl = 1.79×10-3 g/litre = (1.79×10-3/143.5) mol litre-1 = 1.247×10-5 mol litre-1. Ksp = [Ag+][Cl-] = s×s = [1.247×10-5][1.247×10-5], so Ksp = 1.55×10-10 mol2 litre-2.
Teacher's Note: Convert g/L to mol/L by molar mass 143.5, then Ksp = s2 for a 1:1 salt.
Exam Note: Convert grams to moles before squaring.
Question 77. Ksp of AgBr is 4×10-13 and [Ag+] in a solution is 1×10-6 mol litre-1. What is the [Br-] in that solution?
Solution. AgBr(s) ⇌ Ag+(aq.) + Br-; Ksp = [Ag+][Br-], so 4×10-13 = [1×10-6][Br-] and [Br-] = 4×10-7 mol litre-1.
Teacher's Note: Direct use of Ksp = [Ag+][Br-] when one ion concentration is given.
Exam Note: Name the equilibrium and substitute.
Question 78. The [Ag+] ion in a saturated solution of Ag2CrO4 at 25°C is 1.5×10-4 M. Determine Ksp of Ag2CrO4 at 25°C.
Solution. For saturated solution of Ag2CrO4, if solubility is s mol litre-1, then Ag2CrO4(s) ⇌ 2Ag+(aq.) + CrO42-(aq.) (2s, s). Ksp = (2s)2(s) = 4s3 ([Ag+] = 2s = 1.5×10-4, so s = 0.75×10-4) = 4×(0.75×10-4)3, so Ksp = 1.688×10-12 mol3 litre-3.
Teacher's Note: [Ag+] = 2s, so s = 0.75×10-4; Ksp = 4s3 for an A2B salt.
Exam Note: Halve [Ag+] to get s.
Question 79. 25 mL of a sample of clear saturated solution of PbI2 requires 10 mL of a certain AgNO3(aq.) for its titration. What is the molarity of this AgNO3(aq.)? Ksp for PbI2 = 4×10-9.
Solution. For PbI2 ⇌ Pb2+ + 2I- (s, 2s), where s is solubility of PbI2: Ksp = 4s3, so s = ∛(Ksp/4) = ∛(4×10-9/4) = 10-3. [I-] = 2s = 2×10-3 mol/litre. Now for Ag+ + I- → AgI: meq. of Ag+ = meq. of I-, N×10 = 2×10-3×25, so N or M of AgNO3 = 5×10-3.
Teacher's Note: Saturated PbI2 gives [I-] = 2s; titration with Ag+ equates millimoles of I- and Ag+.
Exam Note: Volume ratio 25:10 converts [I-] to M of AgNO3.
Question 80. Equal volumes of 0.02 M CaCl2 and 0.0004 M Na2SO4 are mixed. Will a precipitate form? (Ksp of CaSO4 = 2.4×10-5)
Solution. CaCl2 + Na2SO4 → CaSO4 + 2NaCl. Millimole added: 0.02V and 0.0004V. Suppose V mL of both are mixed: [Ca2+] = 0.02V/2V = 0.01 and [SO42-] = 0.0004V/2V = 0.0002. Thus [Ca2+][SO42-] in solution = 2×10-6 < Ksp (2.4×10-5): CaSO4 will not precipitate.
Teacher's Note: Mixing equal volumes halves each concentration; compare ionic product with Ksp.
Exam Note: Dilute both ions to half before the product.
Question 81. What (H3O+) must be maintained in a saturated H2S solution to precipitate Pb2+, but not Zn2+ from a solution in which each ion is present at a concentration of 0.01 M? (Ksp H2S = 1.1×10-22; Ksp ZnS = 1.0×10-21) (Roorkee 2000)
Solution. For ZnS not to be precipitated from a solution of Zn2+ and Pb2+: [Zn2+][S2-] < Ksp of ZnS, i.e. [10-2][S2-] < 1.0×10-21, or the maximum [S2-] = 10-19 at which ZnS will begin to precipitate or upto this concentration, no precipitation will occur. H2S ⇌ 2H+ + S2-: [H+]2[S2-] = 1.1×10-22, so [H+]2[10-19] = 1.1×10-22, [H+]2 = 11×10-4, [H+] = 3.3×10-2 M. Thus, if [H+] is 3.3×10-2 or slightly higher, the precipitation of ZnS will not take place and only PbS will.
Teacher's Note: Selective precipitation: the less soluble PbS forms; acidity must keep [S2-] below the ZnS limit of 10-19.
Exam Note: Find the maximum [S2-] allowed by Zn2+ first.
Question 82. Ksp of PbCl2 is 10-13. What will be [Pb2+] in a solution prepared by mixing 100 mL of 0.1 M Pb(NO3)2 and 1 mL of 1 M HCl?
Solution. Pb(NO3)2 + 2HCl → PbCl2 + 2HNO3. Millimole added: 100×0.1 = 10, 1×1 = 1, 0, 0. Millimole left: 9.5, 0, 0.5, 1. Concentration in M = mmole/total volume. [Pb2+] = (9.5 + 0.5)/101. Now if PbCl2 is precipitated, then contribution of 0.5 of [Pb2+] from PbCl2 should be left. To see precipitation, ionic concentration product > Ksp. Ionic conc. product = [Pb2+][Cl-]2 = (10/101)(1/101)2 = 9.70×10-6, which is greater than Ksp of PbCl2 and thus, precipitation of PbCl2 occurs. Therefore [Pb2+] = 9.5/101 = 9.4×10-2 mol litre-1.
Teacher's Note: Check ionic product first (9.7×10-6 ≫ Ksp); Cl- is limiting, so 0.5 mmol Pb2+ is removed.
Exam Note: Precipitate first, then count the Pb2+ left.
Question 83. Ksp of PbBr2 is 8×10-5. If the salt is 80% dissociated in solution, calculate the solubility of salt in g per litre.
Solution. Let solubility of PbBr2 be s mol litre-1. PbBr2(s) ⇌ PbBr2(aq.) ⇌ Pb2+ + 2Br-; the ions are s×80/100 and 2s×80/100. Ionisation of PbBr2(s) = 80%, so Ksp = [Pb2+][Br-]2: 8×10-5 = [s×80/100][2s×80/100]2, so s = 0.034 mol litre-1 (M. mass of PbBr2 = 367), and s = 0.034×367 = 12.48 g litre-1 (≈ 12.4 g/L with unrounded s = 0.0339).
Teacher's Note: Only 80% of dissolved salt is ionised, so [Pb2+] = 0.8s and [Br-] = 1.6s; Ksp = 2.048s3.
Exam Note: Apply the 80% factor to both ions.
Question 84. The solubility of Pb(OH)2 in water is 6.7×10-6 M. Calculate the solubility of Pb(OH)2 in a buffer solution of pH = 8. (IIT 1999)
Solution. Ksp of Pb(OH)2 = 4s3 = 4×(6.7×10-6)3 = 1.203×10-15. The buffer contains pH = 8, so pOH = 6 or [OH-] = 10-6. Now let solubility of Pb(OH)2 be s mol litre-1 in it. [Pb2+][OH-]2 = Ksp: [Pb2+][10-6]2 = 1.203×10-15, so [Pb2+] = 1.203×10-3 mol litre-1.
Teacher's Note: Get Ksp from pure-water solubility (4s3), then fix [OH-] by the buffer so solubility = [Pb2+].
Exam Note: Buffer fixes [OH-]; solubility equals [Pb2+] only.
Question 85. The ionisation constant of benzoic acid is 6.46×10-5 and Ksp for C6H5COOAg is 2.5×10-13. How many times is silver benzoate more soluble in a buffer of pH 3.19 as compared to pure water?
Solution. Ksp of C6H5COOAg = [C6H5COO-][Ag+] = 2.5×10-13. In pure water S2 = 25×10-14, S = 5×10-7. In pH 3.19, pOH = 10.81 or [OH-] = 1.55×10-11. C6H5COO- undergoes hydrolysis to form C6H5COOH: C6H5COO- + H2O ⇌ C6H5COOH + OH-; KH = Kw/Ka = [C6H5COOH][OH-]/[C6H5COO-]. So [C6H5COOH]/[C6H5COO-] = Kw/(Ka[OH-]) = 10-14/(6.46×10-5×1.55×10-11) = 10. [Ag+] dissolved in pH 3.19 = [C6H5COO-] left after hydrolysis + [C6H5COOH] formed due to hydrolysis = [C6H5COO-] + 10[C6H5COO-] = 11[C6H5COO-], so [C6H5COO-] = [Ag+]/11. [Ag+][C6H5COO-] = [Ag+]·[Ag+]/11 = 2.5×10-13, so [Ag+] = 1.658×10-6, i.e. solubility is 1.658×10-6/(5×10-7) = 3.316 times greater than in pure water.
Teacher's Note: Acidic buffer converts benzoate to benzoic acid, so total dissolved silver = benzoate + benzoic acid = 11×[benzoate].
Exam Note: Hydrolysis ratio 10:1 comes from Kw/(Ka[OH-]).
Question 86. Calculate the solubility of CaF2 in a solution buffered at pH = 3.0. Ka for HF is 6.3×10-4 and Ksp of CaF2 = 3.45×10-11.
Solution. [Ca2+][F-]2 = 3.45×10-11. The F- reacts with H+ (pH = 3.0) to produce HF: Ka(HF) = [H+][F-]/[HF], or 6.3×10-4 = 10-3×[F-]/[HF], so [HF] = 1.58×[F-]. Also the solution contains [HF] + [F-] = 2×[Ca2+], or 1.58×[F-] + [F-] = 2×[Ca2+], so [F-] = (2/2.58)×[Ca2+] = 0.775[Ca2+]. Let solubility of CaF2 be S mol litre-1, [Ca2+] = S, [F-] = 0.775S. Thus S×(0.775×S)2 = 3.45×10-11, S = 3.86×10-4 M.
Teacher's Note: Fluoride is partly protonated at pH 3, so mass balance [F-] + [HF] = 2S replaces [F-] = 2S.
Exam Note: Use mass balance on fluorine, then Ksp with free F-.
Question 87. Will a precipitate of Mg(OH)2 be formed in a 0.001 M solution of Mg(NO3)2, if the pH of solution is adjusted to 9? Ksp of Mg(OH)2 = 8.9×10-12.
Solution. pH = 9, so [H+] = 10-9 M or [OH-] = 10-5 M. Now if Mg(NO3)2 is present in a solution of [OH-] = 10-5 M, then product of ionic conc. = [Mg2+][OH-]2 = [0.001][10-5]2 = 10-13, lesser than Ksp of Mg(OH)2 (8.9×10-12). Hence Mg(OH)2 will not precipitate.
Teacher's Note: Compare ionic product [Mg2+][OH-]2 = 10-13 with Ksp = 8.9×10-12; square the [OH-].
Exam Note: Square [OH-] for the 2:1 hydroxide.
Question 88. Calculate pH at which Mg(OH)2 begins to precipitate from a solution containing 0.10 M Mg2+ ions. Ksp of Mg(OH)2 = 1×10-11. (Roorkee 1992)
Solution. When Mg(OH)2 starts precipitation, [Mg2+][OH-]2 = Ksp of Mg(OH)2: [0.1][OH-]2 = 1×10-11, so [OH-] = 10-5 M, pOH = 5, pH = 14 - pOH, so pH = 14 - 5 = 9.
Teacher's Note: Precipitation starts when ionic product equals Ksp; solve for [OH-], then pH = 14 - pOH.
Exam Note: Take the square root for [OH-].
Question 89. Calculate the [OH-] of a solution after 100 mL of 0.1 M MgCl2 is added to 100 mL of 0.2 M NaOH. Ksp of Mg(OH)2 = 1.2×10-11.
Solution. MgCl2 + 2NaOH → Mg(OH)2 + 2NaCl. mm before reaction: 10, 20, 0, 0; after reaction: 0, 0, 10, 20. Thus, 10 m mole of Mg(OH)2 are formed. The product of [Mg2+][OH-]2 is therefore [10/200]×[20/200]2 = 5×10-4, which is more than Ksp of Mg(OH)2. Now solubility (s) of Mg(OH)2 can be derived by Ksp = 4s3, so s = ∛(Ksp/4) = ∛(1.2×10-11/4) = 1.4×10-4, and [OH-] = 2s = 2.8×10-4 M (2.88×10-4 M unrounded).
Teacher's Note: Reactants combine exactly (10 mmol Mg2+ with 20 mmol OH-); OH- then comes only from dissolution of Mg(OH)2.
Exam Note: Stoichiometric mixing: use Ksp = 4s3 afterwards.
Question 90. A sample of AgCl was treated with 5.00 mL of 1.5 M Na2CO3 solution to give Ag2CO3. The remaining solution contained 0.0026 g of Cl- per litre. Calculate the solubility product of AgCl (Ksp Ag2CO3 = 8.2×10-12). (IIT 1997)
Solution. Na2CO3 + 2AgCl ⇌ 2NaCl + Ag2CO3. mm added: 7.5, excess, 0, 0; mm left: (7.5 - a), excess, 2a, a. Given [Cl-] = 0.0026/35.5 = 7.32×10-5. Also conc. of Cl- formed = millimole/volume in mL = 2a/5, so 2a/5 = 0.0026/35.5, a = 1.83×10-4 millimole. Hence m mole of Na2CO3 left in 5 mL = 7.5 - 1.83×10-4 ≈ 7.5, or [CO32-] = 7.5/5. Now Ksp(Ag2CO3) = [Ag+]2[CO32-], so [Ag+]2 = 8.2×10-12/(7.5/5) = 5.46×10-12, [Ag+] = 2.34×10-6. Ksp of AgCl = [Ag+][Cl-] = 2.34×10-6×(0.0026/35.5). Corrected: Ksp = 2.34×10-6×7.32×10-5 = 1.71×10-10 (the book prints 1.71×10-19, an exponent slip).
Teacher's Note: Cl- in solution fixes [Ag+] via the Ag2CO3 equilibrium (carbonate ≈ 1.5 M since little is consumed).
Exam Note: Use the same solution's [Ag+] and [Cl-] for AgCl.
Question 91. Calculate simultaneously solubility of AgCNS and AgBr in a solution of water. Ksp of AgBr = 5×10-13 and Ksp of AgCNS = 1×10-12. (UPSEAT 1995)
Solution. Let solubility of AgCNS and AgBr in a solution be a and b mol litre-1 respectively. AgCNS(s) ⇌ Ag+ + CNS- (ions furnished on dissolution a, a); AgBr(s) ⇌ Ag+ + Br- (b, b). So [Ag+] = a + b; [CNS-] = a; [Br-] = b. For AgCNS: Ksp = [Ag+][CNS-]: 1×10-12 = (a+b)a ...(1). For AgBr: 5×10-13 = (a+b)b ...(2). By Eqs. (1) and (2): a/b = 10-12/(5×10-13) = 2, or a = 2b. By Eq. (1): (2b+b)(2b) = 1×10-12, 6b2 = 1×10-12, so b = 4×10-7 mol litre-1 (4.08×10-7 unrounded). By Eq. (1): (a + a/2)a = 1×10-12, so a = 8.16×10-7 mol litre-1.
Teacher's Note: Both salts share [Ag+] = a + b; dividing the two Ksp expressions gives a/b = 2.
Exam Note: Common Ag+: divide the two Ksp equations first.
Question 92. A solution contains a mixture of Ag+ (0.10 M) and Hg22+ (0.10 M) which are to be separated by selective precipitation. Calculate the maximum concentration of iodide ion at which one of them gets precipitated almost completely. What % of that metal is precipitated? (Ksp of AgI = 8.5×10-17 and Ksp of Hg2I2 = 2.5×10-26)
Solution. The [I-] needed for precipitation of Ag+ and Hg22+ are derived as: For AgI: [Ag+][I-] = Ksp(AgI), (0.1)[I-] = 8.5×10-17, so [I-] = 8.5×10-16 M ...(1). For Hg2I2: [Hg22+][I-]2 = 2.5×10-26, (0.1)[I-]2 = 2.5×10-26, so [I-] = 5×10-13 M ...(2). Since [I-] required for precipitation of AgI is less and thus AgI begins to precipitate first. Also it will continue upto addition of [I-] = 5×10-13 when Hg2I2 begins to precipitate. Thus maximum [I-] for AgI precipitation = 5×10-13 M. Now at this concentration of I-, [Ag+]left in solution is [Ag+]left = 8.5×10-17/(5.0×10-13) = 1.7×10-4 M. 0.1 M Ag+ will be left = 1.7×10-4 M Ag+ in solution, i.e. 0.17%. So % of Ag precipitated = 99.83%.
Teacher's Note: Compare [I-] needed for each; AgI needs less (8.5×10-16), precipitates first until [I-] = 5×10-13.
Exam Note: Selective precipitation: the second salt's onset limits the first.
Question 93. 0.01 mole of AgNO3 is added to 1 litre of a solution which is 0.1 M in Na2CrO4 and 0.005 M in NaIO3. Calculate the mole of precipitate formed at equilibrium and the concentrations of Ag+, IO3- and CrO42-. (Ksp values of Ag2CrO4 and AgIO3 are 10-8 and 10-13 respectively.) (Roorkee 2001)
Solution. The Ksp values of Ag2CrO4 and AgIO3 reveal that CrO42- and IO3- will be precipitated on addition of AgNO3 as: [Ag+][IO3-] = 10-13, [Ag+]needed = 10-13/0.005 = 2×10-11; [Ag+]2[CrO42-] = 10-8, [Ag+]needed = √(10-8/0.1) = 3.16×10-4. Thus AgIO3 will be precipitated first. Now, in order to precipitate AgIO3: AgNO3 + NaIO3 → AgIO3 + NaNO3; 0.01, 0.005, 0, 0 → 0.005, 0, 0.005, 0.005. The left mole of AgNO3 are now used to precipitate Ag2CrO4: 2AgNO3 + Na2CrO4 → Ag2CrO4 + 2NaNO3; 0.005, 0.1, 0, 0 → 0, 0.0975, 0.0025, 0.005. Thus [CrO42-] left in solution = 0.0975 M. Now solution has AgIO3(s) + Ag2CrO4(s) + CrO42- ions (0.005, 0.0025, 0.0975 mol). [Ag+]left = √(KspAg2CrO4/[CrO42-]) = √(10-8/0.0975) = 3.2×10-4 M; [IO3-]left = KspAgIO3/[Ag+] = 10-13/(3.2×10-4) ≈ 3.1×10-10 M (the book prints 3.2×10-10). Precipitate formed: 0.005 mol AgIO3 and 0.0025 mol Ag2CrO4.
Teacher's Note: AgIO3 needs far less Ag+ (2×10-11 M) so it precipitates first; leftover Ag+ then forms Ag2CrO4.
Exam Note: Rank by [Ag+] needed, then do stoichiometry stepwise.
Question 94. The Ksp of Ca(OH)2 is 4.42×10-5 at 25°C. A 500 mL of saturated solution of Ca(OH)2 is mixed with equal volume of 0.4 M NaOH. How much Ca(OH)2 in mg is precipitated? (IIT 1992)
Solution. 500 mL of 0.4 M NaOH are mixed with 500 mL of Ca(OH)2, a saturated solution having Ca(OH)2 solubility as s M. For Ca(OH)2 ⇌ Ca2+ + 2OH-: Ksp = s×(2s)2 = 4s3, so 4s3 = 4.42×10-5, s = ∛(4.42×10-5/4) = 0.0223 M. Now Ca(OH)2 + NaOH are mixed; solution has Ca2+ and OH- out of which some Ca2+ are precipitated. On mixing, [Ca2+] = 0.0223×500/1000 = 0.01115 = 111.5×10-4 M; [OH-] = (0.0223×2×500)/1000 (from Ca(OH)2) + (500×0.4)/1000 (from NaOH) = 0.2223 M. [Ca2+][OH-]2 = Ksp: [Ca2+]left[0.2223]2 = 4.42×10-5, so [Ca2+]left = 4.42×10-5/[0.2223]2 = 8.94×10-4 mol litre-1. Mole of Ca(OH)2 precipitated = mole of [Ca2+] precipitated = 111.5×10-4 - 8.94×10-4 = 102.46×10-4. Mass of Ca(OH)2 precipitated from Ca(OH)2 solution = 102.46×10-4×74 = 7582.04×10-4 g = 758.2 mg.
Teacher's Note: Mixing dilutes Ca2+ to 0.01115 M but raises [OH-] to 0.2223 M; precipitation continues until [Ca2+][OH-]2 = Ksp.
Exam Note: Total volume 1 L; the precipitate is the Ca2+ lost, times 74.
Question 95. A sample of hard water contains 0.005 mole of CaCl2 per litre. What is the minimum concentration of Na2SO4 which must be added for removing Ca2+ ions from this water sample? Ksp for CaSO4 is 2.4×10-5 at 25°C.
Solution. For CaSO4 ⇌ Ca2+ + SO42-: [Ca2+][SO42-] = Ksp. Let [SO42-] = a, just sufficient to precipitate CaSO4 from a solution having [Ca2+] = 0.005 M. Then [0.005][a] = 2.4×10-5, so a = 2.4×10-5/0.005 and [SO42-] = 4.8×10-3 mol litre-1.
Teacher's Note: Minimum sulphate to start precipitation is where ionic product equals Ksp: Ksp/[Ca2+].
Exam Note: Minimum concentration means ionic product = Ksp.
Question 96. 1.75 g of solid NaOH are added to 0.25 dm3 of 0.1 M NiCl2 solution. Calculate: (a) mass of Ni(OH)2 formed; (b) pH of final solution. Given, Ksp of Ni(OH)2 = 1.6×10-14
Solution. (a) 2NaOH + NiCl2 → Ni(OH)2 + 2NaCl. Mole before reaction: 1.75/40 = 0.0438 and 0.25×0.1 = 0.025. Mole left: 0, (0.025 - 0.0438/2), 0.0438/2, 0.0438. Mole of Ni(OH)2 formed = 0.0438/2; mass of Ni(OH)2 formed = (0.0438/2)×92.6 = 2.0279 g (≈ 2.03 g).
(b) Also for Ni(OH)2 solution, Ni(OH)2 ⇌ Ni2+ + 2OH-; [Ni2+][OH-]2 = Ksp. [(0.025 - 0.0438/2)/0.25][OH-]2 = 1.6×10-14, so [OH-] = 11.35×10-7 M, pOH = 5.94, pH = 8.06. Note: Ni(OH)2 formed will be precipitated out since maximum solubility of Ni(OH)2 is 1.58×10-5 M.
Teacher's Note: NaOH is limiting (0.0438 mol needs only 0.0219 mol Ni2+); remaining Ni2+ sets [OH-] through Ksp.
Exam Note: Find the limiting reagent first; pH from Ksp, not leftover NaOH.
Question 97. A mixture of water and AgCl is shaken until a saturated solution is obtained. Now the solution is filtered and 100 mL of clear solution of filtrate is mixed with 100 mL of 0.03 M NaBr. Should a precipitate form ? Ksp of AgCl and AgBr are 1×10-10 and 5×10-13 respectively.
Solution. [Ag+] in solution = √Ksp(AgCl) = √(1×10-10) = 10-5 M. Now the solution after mixing with NaBr has [Ag+] = 10-5×100/200 and [Br-] = 100×0.03/200. Thus [Ag+][Br-] = [10-5×100/200]×[100×0.03/200] = 7.5×10-8. The product of ionic concentration is greater than Ksp and thus AgBr will be precipitated.
Teacher's Note: Saturated AgCl supplies [Ag+] = 10-5 M; mixing halves both concentrations; ionic product 7.5×10-8 ≫ Ksp of AgBr.
Exam Note: Dilute both ions to half before the product.
Question 98. Calculate pH of a saturated solution of Mg(OH)2. Ksp for Mg(OH)2 is 8.9×10-12.
Solution. Let solubility of Mg(OH)2 be s mol litre-1. Mg(OH)2 ⇌ Mg2+ + 2OH- (s, 2s). [Mg2+][OH-]2 = Ksp, 4s3 = 8.9×10-12, s = 1.305×10-4 M; [OH-] = 2×1.305×10-4 M, pOH = 3.5832, pH = 10.4168.
Teacher's Note: Ksp = 4s3; [OH-] = 2s, then pH = 14 - pOH.
Exam Note: Remember [OH-] is 2s, not s.
Question 99. 0.1 mili mole of CdSO4 are present in 10 mL acid solution of 0.08 N HCl. Now H2S is passed to precipitate all the Cd2+ ions. What would be the pH of solution after filtering off precipitate, boiling off H2S and making solution 100 mL by adding H2O?
Solution. CdSO4 + HCl + H2S → CdS + H2SO4 (HCl is unchanged, H2SO4 is formed). Millimole added: 0.1, 10×0.08 = 0.8. Millimole after reaction: 0, 0.8, 0.1 (CdS), 0.1 (H2SO4). Millimole of H+ left = 0.8 (from HCl) + 0.1×2 (from H2SO4) = 1.0. Total volume = 100 mL, so [H+] = 1/100 = 10-2 M and pH = 2.
Teacher's Note: Precipitating Cd2+ by H2S releases 2 H+ per Cd2+ (as H2SO4); add to HCl's 0.8 meq.
Exam Note: Count 0.2 mmol extra H+ from CdSO4 precipitation.
Question 100. Zn salt is mixed with (NH4)2S of molarity 0.021 M. What mass of Zn2+ will remain unprecipitated in 12 mL of the solution? Ksp of ZnS = 4.51×10-24.
Solution. [(NH4)2S] = 0.021 M, so [S2-] = 0.021 M. At equilibrium [Zn2+][S2-] = Ksp of ZnS, so [Zn2+] = 4.51×10-24/0.021 = 2.15×10-22 M. [Zn2+] left in solution = 2.15×10-22×65 g/litre = (2.15×10-22×65×12/1000) g/12 mL = 1.677×10-22 g/12 mL.
Teacher's Note: Excess S2- fixes [Zn2+] = Ksp/0.021; convert mol/L to grams in 12 mL with 65 g/mol.
Exam Note: Scale by 12/1000 L and 65 g/mol.
Question 101. Freshly precipitated Al and Mg hydroxides are stirred vigorously in a buffer solution containing 0.25 M of NH4Cl and 0.05 M of NH4OH. Calculate [Al3+] and [Mg2+] in solution. Kb for NH4OH = 1.8×10-5. Ksp of Al(OH)3 = 6×10-32 and Ksp of Mg(OH)2 = 8.9×10-12.
Solution. For buffer solution, NH4Cl = 0.25 M and NH4OH = 0.05 M. pOH = -log Kb + log [Salt]/[Base] = -log 1.8×10-5 + log(0.25/0.05), so [OH-] = 3.6×10-6 M. Now Al(OH)3 and Mg(OH)2 are stirred vigorously in it: [Al3+][OH-]3 = Ksp of Al(OH)3 = 6×10-32, [Al3+][3.6×10-6]3 = 6×10-32, so [Al3+] = 1.28×10-15 M. Also [Mg2+][OH-]2 = Ksp Mg(OH)2: [Mg2+][3.6×10-6]2 = 8.9×10-12, so [Mg2+] = 0.686 M.
Teacher's Note: The NH4Cl/NH4OH buffer fixes [OH-]; each Ksp then gives its cation (cubic for Al, square for Mg).
Exam Note: Use power equal to the number of OH- in each Ksp.
Question 102. A solution has 0.05 M Mg2+ and 0.05 M NH3. Calculate the concentration of NH4Cl required to prevent the formation of Mg(OH)2. Ksp of Mg(OH)2 = 9.0×10-12 and ionisation constant of NH3 is 1.8×10-5. (Roorkee 1993)
Solution. The minimum [OH-] at which there will be no precipitation of Mg(OH)2 can be obtained by Ksp = [Mg2+][OH-]2: 9.0×10-12 = [0.05][OH-]2, so [OH-] = 1.34×10-5 M. Thus, a solution having [OH-] = 1.34×10-5 M will not show precipitation of Mg(OH)2 in 0.05 M Mg2+ solution. These hydroxyl ions are to be derived by a buffer of NH4Cl and NH4OH, i.e. NH4OH ⇌ NH4+ + OH-, NH4Cl → NH4+ + Cl-; for NH4OH Kb = [NH4+][OH-]/[NH4OH]. In presence of NH4Cl, all the [NH4+] are provided by NH4Cl since common ion effect decreases dissociation of NH4OH. So 1.8×10-5 = [NH4+][1.34×10-5]/[0.05], giving [NH4+] = 0.067 M or [NH4Cl] = 0.067 M.
Teacher's Note: First find the maximum [OH-] allowed by Ksp; NH4Cl is added to suppress NH3 ionisation down to that level.
Exam Note: Two steps: Ksp gives [OH-], Kb gives [NH4+].
Question 103. A particular water sample has 131 ppm CaSO4. What fraction of the water must be evaporated in a container before solid CaSO4 begins to deposit Ksp of CaSO4 = 9.0×10-6?
Solution. Maximum solubility of CaSO4 in water S = √Ksp = 3×10-3 mol litre-1. Let V litre of sample be taken, then (ppm = g of CaSO4 in 106 g of sample, 1 litre ≈ 103 g) CaSO4 present = 131×10-3V g = (131×10-3×V/136) mole in V litre. If water is evaporated on heating so that just deposition of CaSO4 occurs, let V1 litre of water be left, then (131×10-3×V/136) mole present in V1 litre solution are equal to 3×10-3×V1 mole. So (131×10-3×V)/136 = 3×10-3×V1, giving V1 = 0.32V. Thus, volume evaporated = V - 0.32V = 0.68V or 68% of water should be evaporated.
Teacher's Note: Deposition starts when [CaSO4] reaches the solubility 3×10-3 M; initial concentration from ppm is 9.6×10-4 M.
Exam Note: Convert ppm to mol/L, then compare with solubility.
Question 104. To a solution of 0.1 M Mg2+ and 0.8 M NH4Cl, an equal volume of NH3 is added which just gives precipitate. Calculate [NH3] in solution. Ksp of Mg(OH)2 = 1.4×10-11 and Kb of NH4OH = 1.8×10-5.
Solution. Suppose V mL of solution contains 0.1 M Mg2+ and 0.8 M NH4Cl. Now V mL of 'a' molarity NH3 is added which just gives precipitate of Mg(OH)2, then [Mg2+][OH-]2 = Ksp Mg(OH)2: [0.1V/2V][OH-]2 = 1.4×10-11 ([Mg2+] = millimole/total volume), so [OH-] = 1.67×10-5 M. Now if [OH-] = 1.67×10-5, on addition of NH3 in NH4Cl, then Mg(OH)2 will precipitate. For buffer solution of NH3 and NH4Cl: -log[OH-] = -log Kb + log [NH4Cl]/[NH3], i.e. -log 1.67×10-5 = -log 1.8×10-5 + log[(0.8×V)/2V]/[(a×V)/2V], so a = 0.7421 M. Hence [NH3] in solution = 0.7421×V/2V = 0.3710 M.
Teacher's Note: Equal-volume mixing halves every concentration; Ksp gives [OH-] at the verge, then Kb gives NH3.
Exam Note: Report [NH3] after mixing (a/2), not the stock.
Question 105. 10 mL of 0.3 M Na2SO4 are mixed with 20 mL solution having initially 0.1 M Ca2+ and 0.1 M Sr2+ in it. What are the final concentrations of Ca2+, Sr2+ and SO42- in solution? Given Ksp of SrSO4 = 7.6×10-7 and Ksp of CaSO4 = 2.4×10-5.
Solution. [Ca2+][SO42-] = 2.4×10-5; [Sr2+][SO42-] = 7.6×10-7; so [Sr2+]/[Ca2+] = 0.03167. Initial conc. of SO42- = 10×0.3/30 = 0.1 M. Initial conc. of Sr2+ = initial conc. of Ca2+ = 0.1×20/30 = 0.0667 M. Let final conc. of Ca2+ = X, so [Sr2+] = 0.03167X. Change in conc. of SO42- = change in conc. of Ca2+ and Sr2+ = 0.0667 - X + 0.0667 - 0.03167X = 0.1334 - 1.03167X. Final [SO42-] = 0.1 - [0.1334 - 1.03167X]. Using [Ca2+][SO42-] = Ksp at equilibrium: X[0.1 - (0.1334 - 1.03167X)] = 2.4×10-5, so 1.03167X2 - 0.0334X = 2.4×10-5, giving X = [Ca2+] = 3.3×10-2 M; [Sr2+] = 1.05×10-3 M; [SO42-] = Ksp/[Ca2+] ≈ 7.3×10-4 M (the book prints 7.17×10-4; solving the quadratic exactly gives X = 0.03308 and [SO42-] = 7.26×10-4 M).
Teacher's Note: Both sulphates precipitate until each Ksp is met; the Ksp ratio fixes the split; sulphate balance gives a quadratic.
Exam Note: Track sulphate consumed by both cations.
Question 106. The solubility of CaCO3 is 7 mg/litre. Calculate the solubility product of BaCO3 from this information and from the fact that when Na2CO3 is added slowly to a solution containing equimolar concentration of Ca2+ and Ba2+, no precipitate is formed until 90% of Ba2+ has been precipitated as BaCO3.
Solution. Ksp of CaCO3 = (7×10-3/100)2 = 49×10-10. When only Ba2+ is 90% precipitated then only CaCO3 starts precipitation if solution contains a mol litre-1 of Ca2+ and Ba2+ each: [Ca2+][CO32-] = 49×10-10, so [CO32-] = 49×10-10/a. Now for BaCO3: Ksp = [Ba2+][CO32-] = (a×10/100)×(49×10-10/a), so Ksp of BaCO3 = 4.9×10-10.
Teacher's Note: CaCO3 Ksp from solubility (7×10-5 M); at that point CaCO3 fixes [CO32-] and 10% Ba2+ remains.
Exam Note: Ca2+ concentration cancels; only 10% of Ba2+ is left.
Question 107. The solubility of Mg(OH)2 is increased by the addition of NH4+ ion. Calculate (a) KC for, Mg(OH)2 + 2NH4+ ⇌ 2NH3 + 2H2O + Mg2+; Ksp of Mg(OH)2 = 6×10-12, Kb of NH3 = 1.8×10-5. (b) Find solubility of Mg(OH)2 in a solution containing 0.5 M NH4Cl before addition of Mg(OH)2.
Solution. (a) For Mg(OH)2 + 2NH4+ ⇌ 2NH3 + 2H2O + Mg2+: KC = [NH3]2[Mg2+]/[NH4+]2 = [NH4OH]2[Mg2+]/[NH4+]2 ...(1). Also NH4OH ⇌ NH4+ + OH-; Kb = [NH4+][OH-]/[NH4OH] ...(2). So KC × Kb2 = [Mg2+][OH-]2 = Ksp of Mg(OH)2, giving KC = Ksp/Kb2 = 6×10-12/(1.8×10-5)2 = 1.85×10-2.
(b) Let a mol litre-1 of Mg(OH)2 be dissolved in presence of 0.5 M NH4Cl. Mole before reaction 0.5, 0, 0; mole after reaction (0.5 - 2a), 2a, a. KC = a×(2a)2/(0.5 - 2a)2, 1.85×10-2 = 4a3/(0.5 - 2a)2 ...(3). Solving the cubic equation, a = 0.081 M. Note: Eq. (3) is cubic and its solution is not included in our subject. However if 2a is neglected in comparison to 0.5, then 'a' comes equal to 0.1049 M.
Teacher's Note: Adding the Mg(OH)2 dissolution to the Kb equations gives KC = Ksp/Kb2; solubility needs the cubic.
Exam Note: Kb is squared because two NH3 are involved.
Question 108. The Ksp of Ag2C2O4 at 25°C is 1.29×10-11 mol3 L-3. A solution of K2C2O4 containing 0.152 mole in 500 mL water is shaken at 25°C with excess of Ag2CO3 till the equilibrium Ag2CO3 + K2C2O4 ⇌ Ag2C2O4 + K2CO3 is reached. At equilibrium the solution contains 0.0358 mole of K2CO3. Assuming degree of dissociation of K2C2O4 and K2CO3 to be same, calculate Ksp of Ag2CO3. (IIT 1991)
Solution. Ag2CO3 + K2C2O4 ⇌ Ag2C2O4 + K2CO3. Mole before reaction: excess, 0.1520; mole at equilibrium (0.1520 - 0.0358) = 0.1162, 0.0358. At equilibrium [C2O42-] = 0.1162/0.5 = 0.2324 M; [CO32-] = 0.0358/0.5 = 0.0716 M. Ag2CO3 is solid and Ag2C2O4 is almost precipitated out. For Ag2C2O4 precipitation: [Ag+]2[C2O42-] = Ksp(Ag2C2O4), [Ag+]2[0.2324] = 1.29×10-11, so [Ag+]2 = 5.55×10-11. Now for Ag2CO3: Ksp = [Ag+]2[CO32-] = [5.55×10-11][0.0716] = 3.97×10-12 mol3 litre-3.
Teacher's Note: At equilibrium both solid silver salts are present, so [Ag+]2 is common: Ksp(Ag2CO3) = Ksp(Ag2C2O4)×[CO32-]/[C2O42-].
Exam Note: Use equilibrium moles in 0.5 L, with common [Ag+]2.
Question 109. Calculate the solubility of AgCN in a buffer solution of pH = 3. Given Ksp of AgCN = 1.2×10-16 and Ka for HCN = 4.8×10-10.
Solution. Let solubility of AgCN be a mol litre-1. AgCN ⇌ Ag+ + CN- (a, a after reaction). However the CN- formed will react with H+ to form HCN: CN- + H+ → HCN; before reaction a, 10-3; after reaction 0, 10-3, a (buffer). So [Ag+] = a and [HCN] = a. Since HCN is weak acid and has low degree of dissociation, also its dissociation is suppressed in presence of [H+]. Now HCN ⇌ H+ + CN-; [CN-][H+]/[HCN] = Ka, or [CN-] = Ka[HCN]/[H+] = a×(4.8×10-10)/10-3. Now for AgCN(s) ⇌ Ag+ + CN-: Ksp = [Ag+][CN-], 1.2×10-16 = a×a×4.8×10-10/10-3, so a2 = 1.2×10-16×10-3/(4.8×10-10) and a = 1.58×10-5 mol litre-1.
Teacher's Note: In acid buffer cyanide is almost all HCN, so solubility a = [Ag+] = [HCN] and [CN-] = Kaa/[H+].
Exam Note: Total dissolved CN equals [Ag+], mostly as HCN.
Question 110. Determine the concentration of NH3 solution whose one litre can dissolve 0.10 mole AgCl. Ksp of AgCl and Kf of Ag(NH3)2+ are 1.0×10-10 M2 and 1.6×107 M-2 respectively. (Roorkee 1999)
Solution. AgCl + 2NH3 ⇌ Ag(NH3)2+ + Cl-. AgCl(s) ⇌ Ag+ + Cl-; Ksp = [Ag+][Cl-] ...(1). Given Ag+ + 2NH3 ⇌ Ag(NH3)2+; Kf = [Ag(NH3)2+]/([Ag+][NH3]2) ...(2). By Eqs. (1) and (2): Ksp×Kf = [Ag(NH3)2+][Cl-]/[NH3]2, or 1×10-10×1.6×107 = a×a/[NH3]2. Given solubility of AgCl = 0.1 M, so a = 0.1 M for Ag(NH3)2+ and Cl-: [NH3]2 = 0.1×0.1/(1.6×10-3) = 6.25, so [NH3] = 2.5 M. Also 0.2 M NH3 is needed to dissolve 0.1 M Ag+ ions, thus [NH3] = 2.5 + 0.2 = 2.7 M.
Teacher's Note: Net constant KspKf = 1.6×10-3; free NH3 is 2.5 M and 0.2 M more is tied in the complex.
Exam Note: Add NH3 consumed (2×0.1) to the free NH3.
Question 111. Predict whether or not AgCl will be precipitated from a solution which is 0.02 M in NaCl and 0.05 M in K[Ag(CN)2]. Given Kinstability constant for [Ag(CN)2]- = 4.0×10-19 and Ksp AgCl = 2.8×10-10.
Solution. [Ag(CN)2]- ⇌ Ag+ + 2CN-; K = [Ag+][CN-]2/[Ag(CN)2-] = 4×10-19 ...(1). Ksp AgCl = [Ag+][Cl-] = 2.8×10-10 ...(2). By Eq. (1): 4×10-19 = x·4x2/0.05, so x = [Ag+] = 1.70×10-7. [Ag+][Cl-] = 1.70×10-7×0.02 = 3.41×10-9 > Ksp. Thus, precipitation of AgCl will take place.
Teacher's Note: Free Ag+ from the complex's instability constant (x·(2x)2/0.05) times [Cl-] is compared with Ksp.
Exam Note: Ionic product 3.4×10-9 exceeds Ksp 2.8×10-10.
Question 112. Given: Ag(NH3)2+ ⇌ Ag+ + 2NH3, KC = 6.2×10-8 and Ksp of AgCl = 1.8×10-10 at 298 K. Calculate the concentration of the complex in 1.0 M aqueous ammonia. (IIT 1998)
Solution. Ag(NH3)2+(aq.) ⇌ Ag+(aq.) + 2NH3(aq.): KC = [NH3]2[Ag+]/[Ag(NH3)2+] ...(1). AgCl(s) ⇌ Ag+(aq.) + Cl-(aq.); Ksp = [Ag+][Cl-] ...(2). In case of simultaneous solubility Ag+ remains same in solution. Given [NH3] = 2a = 1 M (taken as 1.0 M); also [Ag(NH3)2+] = [Cl-] = b because Ag+ obtained from AgCl passes in [Ag(NH3)2+] state. Thus, by Eqs. (1) and (2): KC/Ksp = [NH3]2/([Cl-][Ag(NH3)2+]) = 1/b2, so b2 = 1.8×10-10/(62×10-9) = 0.29×10-2, b = 0.539×10-1 = 0.0539, i.e. [Ag(NH3)2+] = 0.0539 M. (The book takes free [NH3] ≈ 1.0 M; allowing for the 2b mol/L of NH3 used in the complex gives about 0.049 M.)
Teacher's Note: AgCl dissolves in ammonia so that [complex] = [Cl-] = b; dividing KC by Ksp eliminates [Ag+].
Exam Note: Equal Cl- and complex; free NH3 ≈ 1 M.
Question 113. Equal volumes of 0.02 M AgNO3 and 0.02 M HCN are mixed. What is [Ag+] in solution after attaining equilibrium? Given Ka HCN = 6.2×10-10 and Ksp AgCN = 2.2×10-16.
Solution. Ag+ + HCN → AgCN + H+; 0.02V/2V, 0.02V/2V, 0, 0 → 0, 0, 0.01, 0.01, so [H+] = 10-2. AgCN ⇌ Ag+ + CN-; Ksp = 2.2×10-16 = [Ag+][CN-]. HCN ⇌ H+ + CN-; Ka = 6.2×10-10 = [H+][CN-]/[HCN]. Now, soluble CN- formed will hydrolyse as CN- + H2O ⇌ HCN + OH-. So [Ag+] of soluble AgCN = CN- left + HCN formed after hydrolysis: [Ag+] = [CN-] + [H+][CN-]/(6.2×10-10) = [CN-] + 10-2[CN-]/(6.2×10-10). Since [CN-] ≪ 10-2[CN-]/(6.2×10-10): 2.2×10-16/[CN-] = 10-2[CN-]/(6.2×10-10), so [CN-]2 = 2.2×10-16×6.2×10-10/10-2, [CN-] = 3.7×10-12, and [Ag+] = Ksp/[CN-] = 2.2×10-16/(3.7×10-12) = 5.96×10-5 M.
Teacher's Note: Reaction releases 0.01 M H+, so cyanide from dissolved AgCN is almost fully protonated; dissolved silver = dissolved HCN.
Exam Note: Silver in solution equals total cyanide species.
Question 114. Determine the mole of AgI which may be dissolved in 1.0 litre of 1.0 M CN- solution. Ksp for AgI and KC for [Ag(CN)2]- are 1.2×10-17 M2 and 7.1×1019 M-2 respectively. (Roorkee 1998)
Solution. Given AgI(s) ⇌ Ag+(aq.) + I-(aq.); Ksp = [Ag+][I-] = 1.2×10-17 ...(1). Ag+(aq.) + 2CN-(aq.) ⇌ [Ag(CN)2]-(aq.); Kf = [Ag(CN)2-]/([Ag+][CN-]2) = 7.1×1019 ...(2). Let x mole of AgI be dissolved in CN- solution: AgI(s) + 2CN- ⇌ [Ag(CN)2]- + I-; mole before reaction 1, 0, 0; after reaction (1-2x), x, x. By Eqs. (1) and (2): Keq. = Ksp×Kf = [Ag(CN)2-][I-]/[CN-]2 = 1.2×10-17×7.1×1019 = 8.52×102 ...(3), so Keq. = x·x/(1-2x)2 = x2/(1-2x)2, or x/(1-2x) = 29.2. Thus x = 29.2 - 58.4x, so x = 0.49 mol.
Teacher's Note: Combine dissolution and complex formation: K = KspKf = 852; then x/(1-2x) = √852.
Exam Note: Each AgI uses 2 CN-; remaining CN- = 1 - 2x.
Question 115. 100.0 mL of a clear saturated solution of Ag2SO4 is added to 250.0 mL of a clear saturated solution of PbCrO4. Will any precipitate form and if so what? Given, Ksp values for Ag2SO4, Ag2CrO4, PbCrO4 and PbSO4 are 1.4×10-5, 2.4×10-12, 2.8×10-13 and 1.6×10-8 respectively.
Solution. For Ag2SO4 ⇌ 2Ag+ + SO42- (2s, s): Ksp = 4s3, s = ∛(Ksp/4) = ∛(1.4×10-5/4) = 1.52×10-2 M. For PbCrO4 ⇌ Pb2+ + CrO42-: Ksp = s12, s1 = √Ksp = 5.29×10-7 M. In solution (350 mL), conc. of each ion: [Ag+] = 2s×100/350 = 2×1.52×10-2×100/350 = 0.869×10-2 M; [SO42-] = s×100/350 = 1.52×10-2×100/350 = 0.43×10-2 M; [Pb2+] = s1×250/350 = 5.29×10-7×250/350 = 3.78×10-7 M; [CrO42-] = 3.78×10-7 M. It is thus evident that [Ag+]2[CrO42-] = (0.869×10-2)2×(3.78×10-7) = 2.85×10-11 > Ksp of Ag2CrO4 (2.4×10-12) and thus Ag2CrO4 will precipitate. (Check for PbSO4: [Pb2+][SO42-] = 3.78×10-7×0.43×10-2 = 1.6×10-9 < 1.6×10-8, so PbSO4 does not.)
Teacher's Note: Mixing dilutes each ion (100/350 and 250/350); test all four possible ion pairs against their Ksp.
Exam Note: Calculate ionic products for every possible salt.
Question 116. 2 M solution of Na2CO3 is boiled in a closed container with excess of CaF2. Very little amount of CaCO3 and NaF are formed. If the solubility product of CaCO3 is x and molar solubility of CaF2 is y, find the molar concentration of F- in the resulting solution after equilibrium is attained.
Solution. Na2CO3 + CaF2(s) → CaCO3 + 2NaF; mole taken 2, 0, 0; mole left (2 - a), a, 2a, where a is very-very small and thus assume that CaCO3 is in soluble form. Now Ksp of CaCO3 = x = [Ca2+][CO32-]. Also [CO32-] = 2 - a + a = 2, so [Ca2+] = x/2. For CaF2 ⇌ Ca2+ + 2F- (y, 2y): Ksp(CaF2) = [Ca2+][F-]2 = [y][2y]2 = 4y3. Further for [F-]: [F-] = [F-] from CaF2 + [F-] from NaF = √(Ksp(CaF2)/[Ca2+]) + negligible value, so [F-] = √(4y3/(x/2)) = √(8y3/x).
Teacher's Note: Carbonate stays ≈ 2 M, so [Ca2+] = x/2 from CaCO3 Ksp; then [F-] from CaF2 Ksp = 4y3.
Exam Note: Express Ksp(CaF2) through y, then divide by [Ca2+].
Question 117. 25.0 mL clear saturated solution of PbI2(aq.) requires 13.3 mL of AgNO3(aq.) solution for complete precipitation. What is molarity of AgNO3 solution? Ksp of PbI2 is 7.1×10-9.
Solution. For PbI2 saturated solution, PbI2 ⇌ Pb2+ + 2I- (s, 2s); Ksp = 4s3, so s = ∛(Ksp/4) = ∛(7.1×10-9/4) = 1.21×10-3 M. [I-] in solution = 2×1.21×10-3 M = 2.42×10-3 M. Now, if AgNO3 is used to neutralise these I- ions: meq. of AgNO3 = meq. of I-, 13.3×N = 2.42×10-3×25, so NAgNO3 = 4.55×10-3. For AgNO3 normality = molarity, so MAgNO3 = 4.55×10-3 M.
Teacher's Note: Saturated PbI2 gives [I-] = 2s; Ag+ + I- → AgI is 1:1, so milliequivalents match.
Exam Note: Equate millimoles of Ag+ and I- using 25 mL.
Question 118. 250.0 mL of a saturated solution of CaC2O4(aq.) requires 6.3 mL of 0.00102 M KMnO4(aq.) in acid medium for complete oxidation of C2O42- ions. Calculate the Ksp of CaC2O4.
Solution. Meq. of C2O42- = meq. of KMnO4 = 0.00102×6.3×5 (Mn7+ + 5e → Mn2+) = 0.032. Molarity of C2O42- = meq./(volume in mL × valence factor), so s = 0.032/(250×2) M = 6.4×10-5 M (C23+ → 2C4+ + 2e, valence factor 2). Ksp of CaC2O4 = s2 = (6.4×10-5)2 = 4.09×10-9.
Teacher's Note: KMnO4 takes 5 electrons, oxalate gives 2; meq. equality gives the oxalate (and so Ca2+) concentration = solubility.
Exam Note: Use n-factors 5 for MnO4- and 2 for oxalate.
Download P Bahadur Solutions for JEE Math PDF
Chapter-wise P Bahadur Solutions: P Bahadur Solutions Numerical Chemistry Chapter 13 Ionic Equilibrium Part 1
Explore reliable mathematical solutions for P Bahadur Solutions Numerical Chemistry Chapter 13 Ionic Equilibrium Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Detailed Calculation Guides for JEE
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Next Steps in Your Mathematics Revision
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.