OP Tandon Solutions Physical Chemistry IIT JEE Chapter 13 Adsorption And Catalysis

Step-by-Step OP Tandon Solutions for JEE Chemistry Chapter 13 Adsorption And Catalysis

Access comprehensive textbook solutions for Chapter 13 Adsorption And Catalysis using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 13 Adsorption And Catalysis Textbook Solutions PDF

View or download the dedicated Chapter 13 Adsorption And Catalysis solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Adsorption And Catalysis - Questions, Practice Problems and Self Assessment

Matrix Matching Problems (For IIT Aspirants)

Question 1 [A]. Match the reactions of Column-I with the catalysts in Column-II.
Column-I (Reaction)Column-II (Catalyst)
(a) 2KClO3(s) → 2KCl(s) + 3O2(g)(p) Al2O3
(b) 2SO2(g) + O2(g) → 2SO3(g)(q) Pt
(c) 2H2O2(l) → 2H2O(l) + O2(g)(r) V2O5
(d) N2(g) + 3H2(g) → 2NH3(g)(s) MnO2

Solution. Answer (from key): (a)–(s); (b)–(q), (r); (c)–(q); (d)–(p). KClO3 uses MnO2; SO2 oxidation uses Pt or V2O5; H2O2 uses Pt; Haber process uses Al2O3 as promoter.

Teacher's Note: Match each reaction to its industrial catalyst; promoters like Al2O3 are not true catalysts.

Exam Note: KClO3-MnO2, SO2-Pt/V2O5, H2O2-Pt, Haber-Al2O3.

Question 1 [B]. Match the reaction in List-I with the catalysts in List-II and types of catalysis in List-III.
List-IList-IIList-III
(a) Oxidation of SO2 to SO3 in lead chamber process(p) NO(u) Positive catalyst
(b) Synthesis of methanol from CO and H2(q) Pt(v) Poisoned by CO
(c) Oxidation of CO to CO2(r) V2O5(w) Heterogeneous
(d) Oxidation of NH3 to NO in Ostwald's process(s) Rh(x) Homogeneous

Solution. Answer (from key): (a)–p–x, u; (b)–q, s–v, u; (c)–p–x, u; (d)–q–u, v, w. Lead chamber (NO, gas phase) and CO oxidation by NO are homogeneous; Pt/Rh gauze in Ostwald process is heterogeneous.

Teacher's Note: Gas-phase NO is homogeneous; solid Pt, V2O5, Rh with gases is heterogeneous.

Exam Note: Same phase means homogeneous; solid catalyst with gases is heterogeneous.

Question 1 [C]. Match the Column-I with Column-II.
Column-IColumn-II
(a) ZSM-5(p) Na2K2CaMg(AlO2)2(SiO2)2·6H2O
(b) Erionite(q) Catalyst to convert alcohol to gasoline (petrol)
(c) Gemelinite(r) Na2Ca(AlO2)2(SiO2)4·6H2O
(d) Cavity size 550 pm(s) Hx[(AlO2)x(SiO2)96−x]·16H2O

Solution. Answer (from key): (a)–q, s; (b)–p; (c)–r; (d)–s. ZSM-5 is the zeolite with formula (s) that converts alcohol to petrol; its pore (cavity) size is about 550 pm.

Teacher's Note: Link zeolite names to formulas, and ZSM-5 to petrol-producing pores.

Exam Note: ZSM-5 converts alcohols to petrol; formula (s).

Question 1 [D]. Match the List-I with List-II.
List-IList-II
(a) Mo(p) Promoter
(b) Cu(q) Negative catalyst
(c) TEL(r) Decomposition of hydrogen peroxide
(d) Glycerine(s) Haber process

Solution. Answer (from key): (a)–p, s; (b)–p; (c)–q; (d)–r. Mo promotes Fe in Haber process; Cu is a promoter in catalytic systems; TEL is a negative catalyst; glycerine retards H2O2 decomposition.

Teacher's Note: Distinguish promoters, negative catalysts and the reactions they act on.

Exam Note: Promoter increases catalyst activity; negative catalyst slows reaction. (Answer from key.)

Question 1 [E]. Match the Column-I with Column-II.
Column-IColumn-II
(a) Removal of water by silica gel(p) Absorption
(b) Removal of water by anhydrous CaCl2(q) Adsorption
(c) Surface phenomenon(r) Evaporation of liquid
(d) Bulk phenomenon(s) Boiling of liquid

Solution. Answer (from key): (a)–q; (b)–p; (c)–q, r; (d)–p, s. Silica gel adsorbs water on its surface; anhydrous CaCl2 absorbs it into the bulk; evaporation is a surface process, boiling a bulk process.

Teacher's Note: Surface (adsorption) versus bulk (absorption) processes; evaporation is surface.

Exam Note: Adsorption is a surface phenomenon; absorption is a bulk phenomenon.

Question 1 [F]. Match the Column-I with Column-II.
Column-IColumn-II
(a) BaSO4(p) Inhibitor for decomposition of H2O2
(b) Acetamide(q) Catalyst
(c) Zeolite(r) Removes hardness of water
(d) Nickel(s) Poison for Pd in Lindlar's catalyst

Solution. Answer (from key): (a)–s; (b)–p; (c)–q, r; (d)–q. BaSO4 poisons Pd; acetamide inhibits H2O2 decomposition; zeolite is a catalyst and softens water; nickel is a hydrogenation catalyst.

Teacher's Note: Poison, inhibitor, catalyst: each substance has one characteristic role.

Exam Note: Zeolite works as both catalyst and water softener.

Question 1 [G]. Match the phenomena in Column-I with example in Column-II.
Column-IColumn-II
(a) Persorption(p) H2 on Ni surface
(b) Sorption(q) CH3OH in chabazite
(c) Negative adsorption(r) NH3 in H2O
(d) Occlusion(s) Dil. NaCl on blood charcoal

Solution. Answer (from key): (a)–q; (b)–r; (c)–s; (d)–p. Persorption is adsorption in zeolite pores (CH3OH in chabazite); occlusion is gas adsorbed in a metal (H2 on Ni).

Teacher's Note: Learn the sorption terms: persorption, sorption, negative adsorption, occlusion.

Exam Note: Occlusion is adsorption of gas by a metal.

Practice Problems

Question PP.1. Show that the maximum enzyme catalysed reaction rate will occur for [H+]opt = √(k1k2). The general pH control enzyme catalysed reaction is EH22+ ⇌ EH+ ⇌ E. Only EH+ is capable for binding substrate and catalysing the desired reaction; k1 = [EH+][H+]/[EH22+]; k2 = [E][H+]/[EH+].

Solution. Multiplying, k1k2 = [E][H+]2/[EH22+]. In pH control it may be considered that [E] = [EH22+], i.e., enzyme combines almost completely with H+ ions (rate is maximum when [EH+] is maximum, which needs these two forms equal). Thus k1k2 = [H+]2, so [H+]opt = √(k1k2).

Teacher's Note: Active EH+ peaks when the E and EH2(2+) concentrations are equal; multiply the two ionisation constants.

Exam Note: Multiply k1 and k2; set [E] = [EH2 2+].

Question PP.2. The rate of decomposition of acetaldehyde into methane and CO in the presence of I2 at 800 K follows the rate law Rate = k[CH3CHO][I2]. The decomposition is believed to go by a two steps mechanism: CH3CHO + I2 → CH3I + HI + CO; CH3I + HI → CH4 + I2. What is the catalyst for the reaction? Which of the two steps is a slower one?

Solution. Ans. I2 is catalyst (consumed in step 1, regenerated in step 2); the first step is slow, because the rate law contains only the reactants of step 1.

Teacher's Note: A species used then regenerated is a catalyst; the slow step fixes the rate law.

Exam Note: I2 catalyst; first step is rate-determining.

Question PP.3. A solution of palmitic acid (M = 256) in benzene contains 4.24 g acid per litre. When this solution is dropped on the water surface, benzene evaporates and palmitic acid forms monomolecular film of the solid type. If we wish to cover an area of 500 cm2 with a monolayer, what volume of solution should be used? The area occupied by one palmitic acid molecule may be taken to be 2.1 × 10−20 m2.

Solution. Corrected: the book prints 0.0239 cm3 (V = 0.0000239 litre) but its own working gives a value ten times larger. Let V litre of solution be taken: W = 4.24V g; number of molecules = (4.24V/256) × 6.023×1023. Area = 500×10−4 m2 = 0.05 m2 = [(4.24V/256) × 6.023×1023] × 2.1×10−20. So 0.05 = V × 209.5, V = 2.39×10−4 litre = 0.239 cm3.

Teacher's Note: Number of molecules times area per molecule equals film area; watch unit conversion cm2 to m2.

Exam Note: Answer 0.239 cm3 (2.39×10⁻⁴ L); convert area carefully.

Question PP.4. Give the mechanism of the following reactions: (a) In lead chamber process, NO(g) is used as catalyst in the oxidation of SO2 to SO3. (b) NO(g) catalyses the decomposition of ozone to oxygen. (c) Ozone layer depletion by Freon or Teflon.

Solution. (a) 2NO(g) + O2(g) → 2NO2 (intermediate); 2NO2(g) + 2SO2(g) → 2SO3(g) + 2NO(g). OR SO2(g) + H2O + NO2(g) → H2SNO5 (intermediate); H2SNO5 → H2SO4 + NO(g).
(b) NO(g) + O3(g) → NO2(g) + O2(g); O3(g) → O2(g) + O(g); NO2(g) + O(g) → NO(g) + O2(g); overall 2O3(g) → 3O2(g).
(c) Chlorine atoms furnished by freon and teflon act as a catalyst in the decomposition of ozone in the ozone layer: O3 →(sunlight) O2 + [O]; O3 + Cl → O2 + OCl; OCl + O → Cl + O2.

Teacher's Note: Catalyst is consumed in one step and regenerated in the next, so it cancels in the overall equation.

Exam Note: Show NO or Cl regenerated; add steps to get overall equation.

Question PP.5. One gram of charcoal adsorbs 100 mL of 0.5 M CH3COOH to form a mono-layer and thereby the molarity of acetic acid is reduced to 0.49 M. Calculate the surface area of the charcoal adsorbed by each molecule of acetic acid. Surface area of charcoal = 3.01 × 102 m2/gm. (IIT 2003)

Solution. Moles initially = MV/1000 = 0.5×100/1000 = 0.05; moles left = 0.49×100/1000 = 0.049; moles adsorbed = 0.05 − 0.049 = 0.001 mol. Molecules adsorbed = 0.001 × 6.023×1023 = 6.023×1020. Area occupied by one molecule = 3.01×102/6.023×1020 = 5×10−19 m2.

Teacher's Note: Moles adsorbed from molarity change, then total area divided by number of molecules.

Exam Note: Answer 5×10⁻¹⁹ m²; use 0.001 mol adsorbed.

Objective Questions: Questions with single correct answer

Question 1. Adsorption is the phenomenon in which a substance:
(a) accumulates on the surface of the other substance
(b) goes into the body of the other substance
(c) remains close to the other substance
(d) oxidises or reduces the other substance

Solution. Answer: (a) accumulates on the surface of the other substance.

Teacher's Note: Adsorption is surface accumulation; absorption penetrates the bulk.

Exam Note: Answer (a): accumulates on the surface of the other

Question 2. Physical adsorption is appreciable at:
(a) higher temperature
(b) lower temperature
(c) room temperature
(d) 100°C

Solution. Answer: (b) lower temperature.

Teacher's Note: Physisorption is exothermic, so it is appreciable at low temperature.

Exam Note: Answer (b): lower temperature

Question 3. The rate of chemisorption:
(a) decreases with increase of pressure
(b) is independent of pressure
(c) is maximum at one atmospheric pressure
(d) increases with increase of pressure

Solution. Answer: (d) increases with increase of pressure.

Teacher's Note: Chemisorption rate rises with pressure up to monolayer saturation.

Exam Note: Answer (d): increases with increase of pressure

Question 4. A poisonous gas is adsorbed at activated charcoal. The activated charcoal is:
(a) absorber
(b) adsorbate
(c) adsorbent
(d) absorbate

Solution. Answer: (c) adsorbent.

Teacher's Note: Adsorbent is the solid surface; adsorbate is the substance held on it.

Exam Note: Answer (c): adsorbent

Question 5. Chromatography is a technique based on:
(a) solubilities of solute
(b) adsorption of solute
(c) chemical adsorption followed by dispersion
(d) differential adsorption of different constituents of a mixture

Solution. Answer: (d) differential adsorption of different constituents of a mixture.

Teacher's Note: Chromatography separates mixture components by their different adsorption on a stationary phase.

Exam Note: Answer (d): differential adsorption of different constituents of a

Question 6. Which of the following is not a characteristic of chemisorption?
(a) Adsorption is irreversible
(b) ΔH is of the order of 400 kJ
(c) Adsorption is specific
(d) Adsorption increases with increase of surface area

Solution. Answer: (b) ΔH is of the order of 400 kJ.

Teacher's Note: Chemisorption enthalpy is 80-240 kJ/mol; 400 kJ is not typical.

Exam Note: Answer (b): ΔH is of the order of 400

Question 7. In the Freundlich adsorption isotherm equation: log(x/m) = log k + (1/n) log P, the value of 'n' is: [CET (J&K) 2009]
(a) any value from 0 to 1
(b) a negative integer
(c) a positive integer
(d) a positive or negative fractional number

Solution. Answer: (a) any value from 0 to 1. (Printed key: (a); strictly 1/n lies between 0 and 1.)

Teacher's Note: Freundlich exponent 1/n lies between 0 and 1 (n greater than 1).

Exam Note: Answer (a): any value from 0 to 1

Question 8. Which of the following is not the application of adsorption?
(a) De-ionisation of water
(b) Gas masks
(c) Hygroscopic nature of CaCl2
(d) Heterogeneous catalysis

Solution. Answer: (c) Hygroscopic nature of CaCl2.

Teacher's Note: CaCl2 draws water by absorption, so it is not an adsorption application.

Exam Note: Answer (c): Hygroscopic nature of CaCl2

Question 9. Which one of the following is not a correct statement?
(a) Physical adsorption is reversible in nature
(b) Physical adsorption involves van der Waals' forces
(c) Rate of physical adsorption increases with increase of pressure on the adsorbate
(d) High activation energy is involved

Solution. Answer: (d) High activation energy is involved.

Teacher's Note: Physisorption has low activation energy; it is quick and reversible.

Exam Note: Answer (d): High activation energy is involved

Question 10. Which one of the following is the correct statement?
(a) Chemisorption is reversible in nature
(b) Chemisorption is high at low temperature
(c) Chemisorption depends on the nature of gas
(d) Chemisorption does not involve activation energy

Solution. Answer: (c) Chemisorption depends on the nature of gas.

Teacher's Note: Chemisorption is specific to gas and surface, forms chemical bonds.

Exam Note: Answer (c): Chemisorption depends on the nature of gas

Question 11. A catalyst is a substance which:
(a) increases the equilibrium concentration of the product
(b) changes the equilibrium constant of the reaction
(c) shortens the time to reach equilibrium
(d) supplies energy to the reaction

Solution. Answer: (c) shortens the time to reach equilibrium.

Teacher's Note: Catalyst speeds approach to equilibrium without changing its position.

Exam Note: Answer (c): shortens the time to reach equilibrium

Question 12. A catalyst:
(a) increases the free energy change in the reaction
(b) decreases the free energy change in the reaction
(c) does not increase or decrease the free energy change in the reaction
(d) can either decrease or increase the free energy change depending on what catalyst we use

Solution. Answer: (c) does not increase or decrease the free energy change in the reaction.

Teacher's Note: Catalyst does not change ΔG; only the path and activation energy.

Exam Note: Answer (c): does not increase or decrease the free

Question 13. Which of the following statements is more correct?
(a) A catalyst only accelerates the rate of a chemical reaction
(b) A catalyst can retard the rate of a chemical reaction
(c) A catalyst can control the speed of a reaction
(d) A catalyst alters the speed of a reaction

Solution. Answer: (d) A catalyst alters the speed of a reaction.

Teacher's Note: Catalysts can speed up or slow down; 'alters the speed' covers both.

Exam Note: Answer (d): A catalyst alters the speed of a

Question 14. A catalyst is a substance which: [JEE (WB) 2008]
(a) increases the equilibrium constant of the reaction
(b) increases the equilibrium concentration of products
(c) does not alter the reaction mechanism
(d) changes the activation energy of the reaction

Solution. Answer: (d) changes the activation energy of the reaction.

Teacher's Note: Catalyst provides a new path with different activation energy.

Exam Note: Answer (d): changes the activation energy of the reaction

Question 15. Which of the following reactions is an example for homogeneous catalysis? [CET (J&K) 2006]
(a) 2H2O2(l) →(MnO2(s)) 2H2O(l) + O2(g)
(b) 2SO2(g) + O2(g) →(V2O5(s)) 2SO3(g)
(c) 2CO(g) + O2(g) →(NO(g)) 2CO2(g)
(d) H2(g) + C2H4(g) →(Ni(s)) C2H6(g)

Solution. Answer: (c) 2CO(g) + O2(g) →(NO(g)) 2CO2(g).

Teacher's Note: Homogeneous catalysis: catalyst and reactants in the same phase (all gases).

Exam Note: Answer (c): 2CO(g) + O2(g) →(NO(g)) 2CO2(g)

Question 16. The substance which decreases the rate of a chemical reaction is called:
(a) inhibitor
(b) poison
(c) moderator
(d) promoter

Solution. Answer: (a) inhibitor.

Teacher's Note: Substances slowing a reaction are inhibitors (negative catalysts).

Exam Note: Answer (a): inhibitor

Question 17. The decomposition of hydrogen peroxide can be slowed down by the addition of a small amount of acetamide. The latter acts as:
(a) inhibitor
(b) promoter
(c) moderator
(d) poison

Solution. Answer: (a) inhibitor.

Teacher's Note: Acetamide slows H2O2 decomposition: a negative catalyst or inhibitor.

Exam Note: Answer (a): inhibitor

Question 18. The temperature at which the catalytic activity of the catalyst is maximum, is called:
(a) critical temperature
(b) room temperature
(c) absolute temperature
(d) optimum temperature

Solution. Answer: (d) optimum temperature.

Teacher's Note: Enzymes and solids show maximum activity at an optimum temperature.

Exam Note: Answer (d): optimum temperature

Question 19. Efficiency of the catalyst depends on its:
(a) molecular weight
(b) number of free valencies
(c) physical state
(d) amount used

Solution. Answer: (b) number of free valencies.

Teacher's Note: Catalytic efficiency depends on free valencies at the surface (adsorption sites).

Exam Note: Answer (b): number of free valencies

Question 20. Which of the following types of metals make the most efficient catalysts?
(a) Transition metals
(b) Alkali metals
(c) Alkaline earth metals
(d) Radioactive metals

Solution. Answer: (a) Transition metals.

Teacher's Note: Transition metals have d-orbitals and variable valency, so they are best catalysts.

Exam Note: Answer (a): Transition metals

Question 21. Enzymes are made up of: [CG (PET & PMT) 2007]
(a) edible proteins
(b) proteins with specific structure
(c) nitrogen containing carbohydrate
(d) carbohydrates

Solution. Answer: (b) proteins with specific structure.

Teacher's Note: Enzymes are protein molecules with a definite specific structure.

Exam Note: Answer (b): proteins with specific structure

Question 22. In lead chamber process, which one of the following oxides is used as a catalyst?
(a) NO
(b) NO2
(c) N2O3
(d) N2O5

Solution. Answer: (a) NO.

Teacher's Note: Lead chamber process uses nitric oxide to carry oxygen to SO2.

Exam Note: Answer (a): NO

Question 23. Enzymes are:
(a) substances made by chemists to activate washing powders
(b) catalysts found in organisms
(c) synthetic catalysts
(d) very active vegetative catalysts

Solution. Answer: (b) catalysts found in organisms.

Teacher's Note: Enzymes are biocatalysts produced in living cells.

Exam Note: Answer (b): catalysts found in organisms

Question 24. Alcoholic fermentation is brought about by the action of:
(a) yeast
(b) CO2
(c) O2
(d) CO

Solution. Answer: (a) yeast.

Teacher's Note: Zymase in yeast brings about fermentation of sugar to ethanol.

Exam Note: Answer (a): yeast

Question 25. Glucose or fructose is converted into C2H5OH in the presence of:
(a) invertase
(b) diastase
(c) maltase
(d) zymase

Solution. Answer: (d) zymase.

Teacher's Note: Zymase converts glucose or fructose into ethanol and CO2.

Exam Note: Answer (d): zymase

Question 26. The name catalysis was given by:
(a) Rutherford
(b) Langmuir
(c) Graham
(d) Berzelius

Solution. Answer: (d) Berzelius.

Teacher's Note: Berzelius coined the term catalysis in 1835.

Exam Note: Answer (d): Berzelius

Question 27. In the reaction, KMnO4 + H2SO4 + H2C2O4 → Products, Mn2+ ions act as:
(a) positive catalyst
(b) negative catalyst
(c) autocatalyst
(d) enzyme catalyst

Solution. Answer: (c) autocatalyst.

Teacher's Note: Mn2+ formed in the reaction catalyses it: autocatalysis.

Exam Note: Answer (c): autocatalyst

Question 28. In the Haber process of synthesis of NH3:
(a) Mo acts as a catalyst and Fe as a promoter
(b) Fe acts as a catalyst and Mo as a promoter
(c) Fe acts as inhibitor and Mo as a catalyst
(d) Fe acts as promoter and Mo as autocatalyst

Solution. Answer: (b) Fe acts as a catalyst and Mo as a promoter.

Teacher's Note: Haber process: Fe is the catalyst and Mo the promoter.

Exam Note: Answer (b): Fe acts as a catalyst and Mo

Question 29. TEL minimises the knocking effect when mixed with petrol. It acts as:
(a) positive catalyst
(b) negative catalyst
(c) autocatalyst
(d) induced catalyst

Solution. Answer: (b) negative catalyst.

Teacher's Note: Tetraethyl lead slows chain pre-ignition in petrol: a negative catalyst.

Exam Note: Answer (b): negative catalyst

Question 30. Edges and peaks are more effective in a catalyst because:
(a) they have more free valencies
(b) they have limited number of atoms
(c) they have limited number of molecules
(d) none of the above

Solution. Answer: (a) they have more free valencies.

Teacher's Note: Edges and peaks have unsaturated valencies, so adsorb reactants strongly.

Exam Note: Answer (a): they have more free valencies

Question 31. Hydrolysis of starch involves the use of the enzyme:
(a) maltase
(b) zymase
(c) invertase
(d) diastase

Solution. Answer: (d) diastase.

Teacher's Note: Diastase (amylase) hydrolyses starch to maltose.

Exam Note: Answer (d): diastase

Question 32. Which of the following statements is incorrect?
(a) Enzymes exist in colloidal state
(b) Enzymes are catalysts
(c) Enzymes can catalyse any reaction
(d) Urease is an enzyme

Solution. Answer: (c) Enzymes can catalyse any reaction.

Teacher's Note: Enzymes are highly specific, each catalysing one type of reaction.

Exam Note: Answer (c): Enzymes can catalyse any reaction

Question 33. Which of the following catalysts is used in Friedel-Crafts reaction for preparation of toluene from benzene?
(a) Anhydrous aluminium chloride
(b) Nickel
(c) Platinum
(d) Palladium

Solution. Answer: (a) Anhydrous aluminium chloride.

Teacher's Note: Anhydrous AlCl3 is the Lewis-acid catalyst in Friedel-Crafts alkylation.

Exam Note: Answer (a): Anhydrous aluminium chloride

Question 34. Platinised asbestos is used as a catalyst in the manufacture of H2SO4. It is an example of:
(a) homogeneous catalyst
(b) heterogeneous catalyst
(c) autocatalyst
(d) induced catalyst

Solution. Answer: (b) heterogeneous catalyst.

Teacher's Note: Solid catalyst with gaseous reactants is heterogeneous catalysis.

Exam Note: Answer (b): heterogeneous catalyst

Question 35. The catalyst used in the manufacture of sulphuric acid by contact process is:
(a) Al2O3
(b) Cr2O3
(c) V2O5
(d) MnO2

Solution. Answer: (c) V2O5.

Teacher's Note: V2O5 is the catalyst in the contact process.

Exam Note: Answer (c): V2O5

Question 36. The formation of diethyl ether from ethanol is catalysed by:
(a) H2SO4
(b) Al2O3
(c) Cu
(d) Ni

Solution. Answer: (a) H2SO4.

Teacher's Note: Conc. H2SO4 catalyses ether formation from ethanol at 140°C.

Exam Note: Answer (a): H2SO4

Question 37. Which of the following catalysts is sensitive to temperature changes?
(a) Fe
(b) Pt
(c) Ni
(d) Enzyme

Solution. Answer: (d) Enzyme.

Teacher's Note: Enzymes are denatured above their optimum temperature.

Exam Note: Answer (d): Enzyme

Question 38. The catalyst used in the Deacon's process for the manufacture of chlorine is:
(a) Pt
(b) CuCl2
(c) V2O5
(d) Fe

Solution. Answer: (b) CuCl2.

Teacher's Note: Deacon process oxidises HCl with air over CuCl2.

Exam Note: Answer (b): CuCl2

Question 39. A catalytic poison renders the catalyst ineffective because: (IIT 1991)
(a) it is preferentially adsorbed on the catalyst
(b) it adsorbs the molecules of the reactants
(c) it combines chemically with the catalyst
(d) it combines with one of the reactants

Solution. Answer: (a) it is preferentially adsorbed on the catalyst.

Teacher's Note: A poison is strongly adsorbed on active sites, blocking reactants.

Exam Note: Answer (a): it is preferentially adsorbed on the catalyst

Question 40. A finely divided state of the catalyst is more efficient because in this state:
(a) more surface area is available
(b) more energy is stored in the catalyst
(c) positive charge is acquired
(d) negative charge is acquired

Solution. Answer: (a) more surface area is available.

Teacher's Note: Finer division gives larger surface area and more active sites.

Exam Note: Answer (a): more surface area is available

Question 41. The catalyst used in the hydrogenation of oils is:
(a) V2O5
(b) Fe
(c) Ni
(d) Pt

Solution. Answer: (c) Ni.

Teacher's Note: Nickel catalyses hydrogenation of vegetable oils to fats.

Exam Note: Answer (c): Ni

Question 42. Which of the following statements is not true? (MLNR 1993)
(a) The action of a catalyst is specific
(b) The catalyst does not alter the equilibrium
(c) A small amount of catalyst is sufficient to catalyse large amounts of reactants
(d) The catalyst initiates the reaction

Solution. Answer: (d) The catalyst initiates the reaction.

Teacher's Note: A catalyst cannot start a reaction that is not thermodynamically feasible.

Exam Note: Answer (d): The catalyst initiates the reaction

Question 43. The catalyst used in the manufacture of hydrogen by Bosch's process is:
(a) Fe2O3
(b) Cr2O3
(c) Fe2O3 + Cr2O3
(d) Cu

Solution. Answer: (c) Fe2O3 + Cr2O3.

Teacher's Note: Bosch process (water gas shift) uses Fe2O3 with Cr2O3 promoter.

Exam Note: Answer (c): Fe2O3 + Cr2O3

Question 44. The catalyst used for olefin polymerisation is: [JEE (WB) 2009]
(a) Ziegler-Natta catalyst
(b) Wilkinson catalyst
(c) Raney nickel catalyst
(d) Merifield resin

Solution. Answer: (a) Ziegler-Natta catalyst.

Teacher's Note: Ziegler-Natta catalyst (TiCl4 + Al(C2H5)3) polymerises olefins stereospecifically.

Exam Note: Answer (a): Ziegler-Natta catalyst

Question 45. The modern theory of catalysis is based on:
(a) active masses
(b) atomic or molecular weights
(c) size of the particles
(d) number of free valencies

Solution. Answer: (d) number of free valencies.

Teacher's Note: Adsorption theory links catalysis to free valencies on the surface.

Exam Note: Answer (d): number of free valencies

Question 46. According to adsorption theory of catalysis, the reaction rate increases, because:
(a) adsorption produces heat which increases the rate of reaction
(b) in the process of adsorption, the kinetic energy of the molecules increases
(c) the concentration of reactants at the active centres becomes high due to adsorption
(d) the activation energy of the reaction becomes high due to adsorption

Solution. Answer: (c) the concentration of reactants at the active centres becomes high due to adsorption.

Teacher's Note: Adsorption concentrates reactants at active centres, raising rate.

Exam Note: Answer (c): the concentration of reactants at the active

Question 47. Which one of the following statements is false?
(a) Enzymes are highly specific
(b) Enzymes increase activation energy
(c) Enzymes require optimum temperature
(d) Enzymes require optimum pH

Solution. Answer: (b) Enzymes increase activation energy.

Teacher's Note: Enzymes lower, not increase, the activation energy.

Exam Note: Answer (b): Enzymes increase activation energy

Question 48. An example of an autocatalytic reaction is:
(a) hydrogenation of oils
(b) decomposition of nitroglycerine
(c) oxidation of Na3AsO3 in presence of Na2SO3
(d) thermal decomposition of KClO3 in presence of MnO2

Solution. Answer: (b) decomposition of nitroglycerine.

Teacher's Note: Nitroglycerine decomposes with a product acting as catalyst: autocatalysis.

Exam Note: Answer (b): decomposition of nitroglycerine

Question 49. Enzyme catalysis is an example of:
(a) autocatalysis
(b) heterogeneous catalysis
(c) homogeneous catalysis
(d) induced catalysis

Solution. Answer: (b) heterogeneous catalysis.

Teacher's Note: Enzymes are colloidal particles, so treated as heterogeneous catalysts.

Exam Note: Answer (b): heterogeneous catalysis

Question 50. The biocatalysts are:
(a) enzymes
(b) minerals
(c) plants
(d) all proteins

Solution. Answer: (a) enzymes.

Teacher's Note: Enzymes are biocatalysts; not all proteins are enzymes.

Exam Note: Answer (a): enzymes

Question 51. Which one of the following statements is incorrect in the case of heterogeneous catalyst? (CPMT 1990)
(a) The catalyst lowers the energy of activation
(b) The catalyst actually forms a compound with the reactant
(c) The surface of the catalyst plays a very important role
(d) There is no change in the energy of activation

Solution. Answer: (d) There is no change in the energy of activation.

Teacher's Note: A catalyst lowers activation energy; saying no change is incorrect.

Exam Note: Answer (d): There is no change in the energy

Question 52. Regarding criteria of catalysis which one of the following statements is not true? (CPMT 1990)
(a) The catalyst is unchanged chemically during the reaction
(b) A small quantity of catalyst is often sufficient to bring about a considerable amount of the reaction
(c) In reversible reaction, the catalyst alters the equilibrium position
(d) The catalyst accelerates the rate of reaction

Solution. Answer: (c) In reversible reaction, the catalyst alters the equilibrium position.

Teacher's Note: A catalyst never alters equilibrium position, only speeds its attainment.

Exam Note: Answer (c): In reversible reaction, the catalyst alters the

Question 53. In which of the following processes, a catalyst is not used?
(a) Haber's process
(b) Deacon's process
(c) Solvay process
(d) Lead chamber process

Solution. Answer: (c) Solvay process.

Teacher's Note: Solvay process (NaHCO3 from NaCl, NH3, CO2) uses no catalyst.

Exam Note: Answer (c): Solvay process

Question 54. The effect of a catalyst in a chemical reaction is to change the:
(a) activation energy
(b) equilibrium concentration
(c) heat of reaction
(d) final products

Solution. Answer: (a) activation energy.

Teacher's Note: Catalyst changes the path, hence the activation energy only.

Exam Note: Answer (a): activation energy

Question 55. Protons accelerate the hydrolysis of esters. This is an example of:
(a) a promoter
(b) a heterogeneous catalyst
(c) an acid-base catalyst
(d) an autocatalyst

Solution. Answer: (c) an acid-base catalyst.

Teacher's Note: H+ ions catalysing ester hydrolysis is acid-base catalysis.

Exam Note: Answer (c): an acid-base catalyst

Question 56. In the Ostwald's process for the manufacture of HNO3, the catalyst used is:
(a) Fe
(b) Pt
(c) V2O5
(d) Mo

Solution. Answer: (b) Pt.

Teacher's Note: Ostwald process oxidises NH3 over platinum gauze.

Exam Note: Answer (b): Pt

Question 57. The efficiency of an enzyme in catalysing a reaction is due to its capacity:
(a) to form a strong enzyme substrate complex
(b) to decrease the bond energies in the substrate molecule
(c) to change the shape of the substrate molecule
(d) to lower the activation energy of the reaction

Solution. Answer: (d) to lower the activation energy of the reaction.

Teacher's Note: Enzymes work by lowering the activation energy.

Exam Note: Answer (d): to lower the activation energy of the

Question 58. The enzymes are killed:
(a) at a very high temperature
(b) during the chemical reaction
(c) at low temperature
(d) under atmospheric pressure

Solution. Answer: (a) at a very high temperature.

Teacher's Note: Enzymes are denatured (killed) at high temperature.

Exam Note: Answer (a): at a very high temperature

Question 59. The enzyme ptyalin used for digestion of food is present in:
(a) saliva
(b) blood
(c) intestine
(d) adrenal glands

Solution. Answer: (a) saliva.

Teacher's Note: Ptyalin (salivary amylase) is present in saliva.

Exam Note: Answer (a): saliva

Question 60. Which of the following acts as a negative catalyst?
(a) Lead tetraethyl as antiknock compound
(b) Glycerol in decomposition of H2O2
(c) Ethanol in the oxidation of chloroform
(d) All of the above

Solution. Answer: (d) All of the above.

Teacher's Note: TEL, glycerol and ethanol all act as negative catalysts.

Exam Note: Answer (d): All of the above

Question 61. Which of the following types of materials act as effective catalysts?
(a) Alkali metals
(b) Transition metals
(c) Alkaline earth metals
(d) Radioactive metals

Solution. Answer: (b) Transition metals.

Teacher's Note: Transition metals are effective catalysts due to variable oxidation states.

Exam Note: Answer (b): Transition metals

Question 62. In which of the following reactions is a catalyst required?
(a) S + O2 → SO2
(b) C + O2 → CO2
(c) 2SO2 + O2 → 2SO3
(d) All of these

Solution. Answer: (c) 2SO2 + O2 → 2SO3.

Teacher's Note: SO2 to SO3 is very slow without a catalyst (V2O5 or Pt).

Exam Note: Answer (c): 2SO2 + O2 → 2SO3

Question 63. Which is not the characteristic of a catalyst? (AFMC 1992)
(a) It changes the equilibrium point
(b) It initiates the reaction
(c) It alters the rate of reaction
(d) It increases the average KE of molecules

Solution. Answer: (b) It initiates the reaction.

Teacher's Note: A catalyst cannot change equilibrium or initiate a reaction; (b) is not its trait; key says (b).

Exam Note: Answer (b): It initiates the reaction

Question 64. In chemical reaction, the catalyst: (AFMC 1993)
(a) alters the amount of products
(b) lowers the activation energy
(c) decreases ΔH of forward reaction
(d) increases ΔH of forward reaction

Solution. Answer: (b) lowers the activation energy.

Teacher's Note: Catalyst lowers activation energy, leaving ΔH unchanged.

Exam Note: Answer (b): lowers the activation energy

Question 65. Which statement is not correct? [PMT (MP) 1993]
(a) Physical adsorption is due to van der Waals' forces
(b) Physical adsorption decreases at high temperature and low pressure
(c) Physical adsorption is reversible
(d) Adsorption energy for chemical adsorption is generally lesser than that for physical adsorption

Solution. Answer: (d) Adsorption energy for chemical adsorption is generally lesser than that for physical adsorption.

Teacher's Note: Chemisorption energy is higher than physisorption energy; (d) is wrong.

Exam Note: Answer (d): Adsorption energy for chemical adsorption is generally

Question 66. In the adsorption of oxalic acid by activated charcoal, the activated charcoal is known as:
(a) adsorbent
(b) adsorbate
(c) absorber
(d) none of these

Solution. Answer: (a) adsorbent.

Teacher's Note: Charcoal holding oxalic acid on its surface is the adsorbent.

Exam Note: Answer (a): adsorbent

Question 67. Which can adsorb larger volume of hydrogen gas?
(a) Colloidal solution of palladium
(b) Finely divided nickel
(c) Finely divided platinum
(d) Colloidal Fe(OH)3

Solution. Answer: (a) Colloidal solution of palladium.

Teacher's Note: Colloidal palladium has huge surface area, adsorbing very large H2 volumes.

Exam Note: Answer (a): Colloidal solution of palladium

Question 68. Platinum is used as a catalyst in:
(a) oxidation of ammonia to form nitric acid
(b) hardening of oils
(c) production of synthetic rubber
(d) synthesis of methanol

Solution. Answer: (a) oxidation of ammonia to form nitric acid.

Teacher's Note: Pt gauze catalyses ammonia oxidation in nitric acid manufacture.

Exam Note: Answer (a): oxidation of ammonia to form nitric acid

Question 69. Hydrolysis of cane sugar is catalysed by:
(a) H+
(b) mineral acids
(c) enzymes
(d) all of these

Solution. Answer: (d) all of these.

Teacher's Note: Cane sugar inversion is catalysed by H+, acids and the enzyme invertase.

Exam Note: Answer (d): all of these

Question 70. KClO3 on heating decomposes into KCl and O2. If some MnO2 is added the reaction goes much faster because:
(a) MnO2 decomposes to give oxygen
(b) MnO2 provides heat by reacting
(c) better contact is provided by MnO2
(d) MnO2 acts as catalyst

Solution. Answer: (d) MnO2 acts as catalyst.

Teacher's Note: MnO2 acts as a catalyst, lowering KClO3 decomposition temperature.

Exam Note: Answer (d): MnO2 acts as catalyst

Question 71. Which acts as poison for Pd-charcoal in Lindlar's catalyst?
(a) BaSO4
(b) Quinoline
(c) Both (a) and (b)
(d) None of these

Solution. Answer: (c) Both (a) and (b).

Teacher's Note: Lindlar catalyst: Pd on BaSO4 poisoned with quinoline.

Exam Note: Answer (c): Both (a) and (b)

Question 72. The inhibitors:
(a) retard the rate of a chemical reaction
(b) stop a chemical reaction immediately
(c) are reducing agents
(d) do not allow the reaction to proceed

Solution. Answer: (a) retard the rate of a chemical reaction.

Teacher's Note: Inhibitors retard reaction rate; they do not stop it completely.

Exam Note: Answer (a): retard the rate of a chemical reaction

Question 73. The catalyst used in the manufacture of nitric acid by Ostwald's process is:
(a) Mo
(b) Pt
(c) V2O5
(d) Fe

Solution. Answer: (b) Pt.

Teacher's Note: Pt-Rh gauze is the Ostwald process catalyst.

Exam Note: Answer (b): Pt

Question 74. Which is an example of autocatalysis?
(a) Hydrolysis of methyl acetate
(b) Decomposition of TNG
(c) Oxidation of oxalic acid by KMnO4
(d) All of the above

Solution. Answer: (d) All of the above.

Teacher's Note: Autocatalysis: a product catalyses the reaction, showing a slow start then fast rate.

Exam Note: Answer (d): All of the above

Question 75. Which plot is the adsorption isobar for chemisorption?
Tx/m(a)Tx/m(b)Tx/m(c)Tx/m(d)

(a) Plot (a): x/m decreases steadily with T
(b) Plot (b): U-shaped curve
(c) Plot (c): x/m rises then falls with T
(d) Plot (d): x/m rises then stays constant

Solution. Answer: (c) Plot (c): x/m rises then falls with T.

Teacher's Note: Chemisorption isobar rises then falls with temperature (activation, then desorption).

Exam Note: Answer (c): Plot (c): x/m rises then falls with

Question 76. In the titration between oxalic acid and acidified potassium permanganate, the manganous salt formed during the reaction catalyses the reaction. The manganous salt acts as:
(a) promoter
(b) positive catalyst
(c) autocatalyst
(d) none of these

Solution. Answer: (c) autocatalyst.

Teacher's Note: Mn2+ formed in the reaction catalyses it: autocatalyst.

Exam Note: Answer (c): autocatalyst

Question 77. Adsorption is accompanied by:
(a) decrease in entropy of the system
(b) decrease in enthalpy of the system
(c) TΔS for the process is negative
(d) all of the above

Solution. Answer: (d) all of the above.

Teacher's Note: Adsorption lowers ΔH, ΔS and TΔS (negative), making ΔG negative.

Exam Note: Answer (d): all of the above

Question 78. Consider the following statements: 1. Zeolites are aluminosilicates. 2. Aluminium can occupy two adjacent sites in zeolites. Which of the following statements is correct? (SCRA 2009)
(a) 1 only
(b) 2 only
(c) both 1 and 2
(d) neither 1 nor 2

Solution. Answer: (a) 1 only.

Teacher's Note: Zeolites are aluminosilicates, but two Al atoms cannot be adjacent (Loewenstein rule).

Exam Note: Answer (a): 1 only

Question 79. Zeolites are used as catalyst in:
(a) petrochemical industries during cracking
(b) the preparation of H2SO4
(c) the hydrolysis of ester
(d) all of the above

Solution. Answer: (a) petrochemical industries during cracking.

Teacher's Note: Zeolites such as ZSM-5 catalyse cracking and reforming in petrochemicals.

Exam Note: Answer (a): petrochemical industries during cracking

Question 80. Choose the correct statement for chemical adsorption: [CET (Gujarat) 2006]
(a) Value of adsorption enthalpy is above −20 kJ mol−1
(b) van der Waals' forces exist between adsorbent and adsorbate
(c) Usually monomolecular layer is formed on adsorbent
(d) Multimolecular layer may be formed on adsorbent

Solution. Answer: (c) Usually monomolecular layer is formed on adsorbent.

Teacher's Note: Chemisorption is a monolayer process held by chemical bonds.

Exam Note: Answer (c): Usually monomolecular layer is formed on adsorbent

Question 81. The function of zymase is to: (AIIMS 1992)
(a) change starch into sugar
(b) ferment glucose to alcohol and carbon dioxide
(c) change malt sugar into glucose
(d) change starch into malt sugar and dextrin

Solution. Answer: (b) ferment glucose to alcohol and carbon dioxide.

Teacher's Note: Zymase ferments glucose to ethanol and CO2.

Exam Note: Answer (b): ferment glucose to alcohol and carbon dioxide

Question 82. Which of the following relations is/are correct? (AIIMS 1995) (i) x/m = constant (at high pressure) (ii) x/m = constant × P1/n (at intermediate pressure) (iii) x/m = constant × Pn (at low pressure)
(a) All are correct
(b) All are wrong
(c) (i) and (ii) are correct
(d) (iii) is correct

Solution. Answer: (c) (i) and (ii) are correct.

Teacher's Note: Freundlich is valid at moderate pressure; Langmuir limits explain (i) and (ii).

Exam Note: Answer (c): (i) and (ii) are correct

Question 83. The principle(s) involved in chromatographic operation is/are: (AIIMS 1996)
(a) adsorption
(b) absorption
(c) partition
(d) none of these

Solution. Answer: (a) adsorption.

Teacher's Note: Chromatography principle: adsorption (and partition) of components.

Exam Note: Answer (a): adsorption

Question 84. The function of enzymes in the living system is to: (CBSE 1997)
(a) transport oxygen
(b) provide immunity
(c) catalyse biochemical reaction
(d) provide energy

Solution. Answer: (c) catalyse biochemical reaction.

Teacher's Note: Enzymes catalyse biochemical reactions in living systems.

Exam Note: Answer (c): catalyse biochemical reaction

Question 85. Which one of the following is a shape selective catalyst?
(a) V2O5
(b) Cr2O3
(c) Hydrated zeolites
(d) ZSM-5

Solution. Answer: (d) ZSM-5.

Teacher's Note: ZSM-5 is shape selective; its pores admit only certain molecules.

Exam Note: Answer (d): ZSM-5

Question 86. The process which is catalysed by one of the products is called: (DPMT 1999)
(a) acid-based catalyst
(b) autocatalyst
(c) negative catalyst
(d) positive catalyst

Solution. Answer: (b) autocatalyst.

Teacher's Note: Reaction catalysed by one of its products is autocatalysis.

Exam Note: Answer (b): autocatalyst

Question 87. The heats of adsorption in physisorption lie in the range (kJ/mol):
(a) 40–400
(b) 40–100
(c) 10–400
(d) 1–10 (last option partly illegible in the scan)

Solution. Answer: (c) 10–400.

Teacher's Note: Physisorption enthalpy is low, about 20-40 kJ/mol.

Exam Note: Answer (c): 10–400

Question 88. In physical adsorption, the forces associated are: [CET (Haryana) 2000]
(a) ionic
(b) covalent
(c) van der Waals'
(d) H-bonding

Solution. Answer: (c) van der Waals'.

Teacher's Note: Physisorption involves weak van der Waals' forces.

Exam Note: Answer (c): van der Waals'

Question 89. In Ziegler-Natta polymerisation of ethylene, the active species are:
(a) AlCl3
(b) EtA
(c) CH2CH2
(d) Ti3+
(e) TiCl4

Solution. Answer: (d) Ti3+.

Teacher's Note: Ti3+ (from TiCl4 reduced by AlEt3) is the active species in Ziegler-Natta.

Exam Note: Answer (d): Ti3+

Question 90. ZSM-5 converts:
(a) alcohol to petrol
(b) benzene to toluene
(c) toluene to benzene
(d) heptane to toluene

Solution. Answer: (a) alcohol to petrol.

Teacher's Note: ZSM-5 converts methanol/alcohol into gasoline hydrocarbons.

Exam Note: Answer (a): alcohol to petrol

Question 91. A catalyst increases the rate of reaction by: (CPMT 1999)
(a) decreasing enthalpy
(b) decreasing internal energy
(c) decreasing activation energy
(d) increasing activation energy

Solution. Answer: (c) decreasing activation energy.

Teacher's Note: Catalysts act by lowering activation energy.

Exam Note: Answer (c): decreasing activation energy

Question 92. The role of a catalyst in a reversible reaction is to: (EAMCET 1999)
(a) increase the rate of forward reaction
(b) decrease the rate of backward reaction
(c) alter the equilibrium constant of a reaction
(d) allow the equilibrium to be achieved quickly

Solution. Answer: (d) allow the equilibrium to be achieved quickly.

Teacher's Note: In reversible reactions catalyst speeds both directions, so equilibrium arrives sooner.

Exam Note: Answer (d): allow the equilibrium to be achieved quickly

Question 93. A catalyst in finely divided state is more efficient because in this state:
(a) it has got large activation energy
(b) it can react with one reactant more effectively
(c) it has large surface area
(d) all of the above

Solution. Answer: (c) it has large surface area.

Teacher's Note: Fine division means large surface area and more active sites.

Exam Note: Answer (c): it has large surface area

Question 94. In case of autocatalysis: (KCET 2002)
(a) reactant catalyses
(b) heat produced in the reaction catalyses
(c) product catalyses
(d) solvent catalyses

Solution. Answer: (c) product catalyses.

Teacher's Note: Autocatalysis: product catalyses the reaction.

Exam Note: Answer (c): product catalyses

Question 95. Which of the following statements is false? (KCET 2002)
(a) Increase of pressure increases the amount of adsorption
(b) Increase of temperature may decrease the amount of adsorption
(c) The adsorption may be monolayered or multilayered
(d) Particle size of the adsorbent will not affect the amount of adsorption

Solution. Answer: (d) Particle size of the adsorbent will not affect the amount of adsorption.

Teacher's Note: Particle size matters: finer adsorbent has more surface and adsorbs more.

Exam Note: Answer (d): Particle size of the adsorbent will not

Question 96. Rate of physisorption increases with: (IIT 2003)
(a) decrease in temperature
(b) increase in temperature
(c) decrease in pressure
(d) decrease in surface area

Solution. Answer: (a) decrease in temperature.

Teacher's Note: Physisorption is exothermic: it increases when temperature decreases.

Exam Note: Answer (a): decrease in temperature

Question 97. Which of the following characteristics is not correct for physical adsorption? (AIEEE 2003)
(a) Adsorption increases with increase in temperature
(b) Adsorption is spontaneous
(c) Both enthalpy and entropy of adsorption are negative
(d) Adsorption on solid is reversible

Solution. Answer: (a) Adsorption increases with increase in temperature.

Teacher's Note: Adsorption is exothermic, so it decreases with temperature rise.

Exam Note: Answer (a): Adsorption increases with increase in temperature

Question 98. According to adsorption theory of catalysis, the speed of reaction increases because: (CBSE 2003)
(a) the concentration of the reactant molecules at the active centres of catalyst becomes high due to adsorption
(b) in the process of adsorption, the activation energy of the molecules becomes large
(c) adsorption produces heat which increases the speed of the reaction
(d) adsorption lowers the activation energy of the reaction

Solution. Answer: (a) the concentration of the reactant molecules at the active centres of catalyst becomes high due to adsorption.

Teacher's Note: Adsorption raises reactant concentration at active sites, increasing rate.

Exam Note: Answer (a): the concentration of the reactant molecules at

Question 99. The chemical equilibrium of a reversible reaction is not influenced by: (KCET 2004)
(a) catalyst
(b) pressure
(c) temperature
(d) concentration

Solution. Answer: (a) catalyst.

Teacher's Note: Catalyst does not shift equilibrium; pressure, temperature, concentration can.

Exam Note: Answer (a): catalyst

Question 100. Identify the gas which is readily adsorbed by activated charcoal: (KCET 2004)
(a) N2
(b) H2
(c) O2
(d) SO2

Solution. Answer: (d) SO2.

Teacher's Note: Easily liquefiable gases like SO2 are adsorbed strongly on charcoal.

Exam Note: Answer (d): SO2

Question 101. Pick out the one which does not belong to the family of enzymes: (KCET 2004)
(a) lipase
(b) pepsin
(c) ptylin
(d) cellulose

Solution. Answer: (d) cellulose.

Teacher's Note: Cellulose is a polysaccharide, not an enzyme.

Exam Note: Answer (d): cellulose

Question 102. Which one of the following statements about zeolite is false? [CBSE (PMT) 2004]
(a) They are used as cation exchanger
(b) They have open structure which enables them to take up small molecules
(c) Zeolites are aluminosilicates having a three dimensional network
(d) Some of the SiO44− units are replaced by AlO45− and AlO69− ions in zeolites

Solution. Answer: (d) Some of the SiO44− units are replaced by AlO45− and AlO69− ions in zeolites.

Teacher's Note: Zeolites replace Si4+ by Al3+; the AlO6 unit statement is false.

Exam Note: Answer (d): Some of the SiO44− units are replaced

Question 103. Adsorption of gases on solid surface is generally exothermic because: [IIT (S) 2004]
(a) enthalpy is positive
(b) entropy decreases
(c) entropy increases
(d) free energy increases

Solution. Answer: (b) entropy decreases.

Teacher's Note: Adsorption lowers entropy; exothermic ΔH must offset TΔS for ΔG less than 0.

Exam Note: Answer (b): entropy decreases

Question 104. Identify the correct statement regarding enzymes. (AIEEE 2004)
(a) Enzymes are specific biological catalysts that can normally function at very high temperature (T ≈ 1000 K)
(b) Enzymes are normally heterogeneous catalysts that are very specific in action
(c) Enzymes are specific biological catalysts that cannot be poisoned
(d) Enzymes are specific biological catalysts that possess well defined active site

Solution. Corrected: Answer: (d) Enzymes are specific biological catalysts that possess well defined active site. The printed key gives (b), but (d) is the standard answer: enzymes are specific biological catalysts possessing a well-defined active site.

Teacher's Note: Enzymes are specific catalysts with well-defined active sites; key letter is doubtful.

Exam Note: Answer (d): Enzymes are specific biological catalysts that possess

Question 105. The extent of adsorption of a gas on a solid depends on: (KCET 2005)
(a) nature of the gas
(b) pressure of the gas
(c) temperature of the gas
(d) all are correct

Solution. Answer: (d) all are correct.

Teacher's Note: Adsorption depends on gas nature, pressure and temperature.

Exam Note: Answer (d): all are correct

Question 106. The conversion of maltose to glucose is possible by the enzyme: (AFMC 2005)
(a) zymase
(b) lactase
(c) maltase
(d) diastase

Solution. Answer: (c) maltase.

Teacher's Note: Maltase hydrolyses maltose to glucose.

Exam Note: Answer (c): maltase

Question 107. Which of the following is true in respect of adsorption? [PET (Kerala) 2006]
(a) ΔG < 0; ΔS > 0; ΔH < 0
(b) ΔG < 0; ΔS < 0; ΔH < 0
(c) ΔG > 0; ΔS > 0; ΔH < 0
(d) ΔG < 0; ΔS < 0; ΔH > 0
(e) ΔG > 0; ΔS > 0; ΔH > 0

Solution. Answer: (b) ΔG < 0; ΔS < 0; ΔH < 0.

Teacher's Note: Adsorption: ΔH, ΔS and ΔG are all negative.

Exam Note: Answer (b): ΔG < 0; ΔS < 0; ΔH

Question 108. If x/m is the mass of adsorbate adsorbed per unit mass of adsorbent, P is the pressure of the adsorbate gas, a and b are constants, which of the following represents "Langmuir adsorption isotherm"? [PET (Kerala) 2006]
(a) log(x/m) = log(a/b) + (1/a) log P
(b) x/m = b/a + 1/(aP)
(c) x/m = (1 + bP)/(aP)
(d) 1/(x/m) = a/b + P/a
(e) 1/(x/m) = b/a + 1/(aP)

Solution. Corrected: Answer: (e) 1/(x/m) = b/a + 1/(aP). Langmuir: x/m = aP/(1+bP), so 1/(x/m) = b/a + 1/(aP); this is option (e), not (c) as printed.

Teacher's Note: Langmuir: x/m = aP/(1+bP); inverting gives linear plot m/x versus 1/P.

Exam Note: Answer (e): 1/(x/m) = b/a + 1/(aP)

Question 109. The efficiency of an enzyme to catalyse a reaction is due to its capacity to: [PMT (Kerala) 2006]
(a) reduce the activation energy of the reaction
(b) form strong enzyme-substrate complex
(c) decrease the bond energy of all substrate molecules
(d) increase the free energy of the catalyst-substrate reaction
(e) alter the substrate geometry to fit into the shape of the enzyme molecule

Solution. Answer: (a) reduce the activation energy of the reaction.

Teacher's Note: Enzymes lower activation energy by binding substrate at the active site.

Exam Note: Answer (a): reduce the activation energy of the reaction

Question 110. Although, nitrogen does not adsorb on a surface at room temperature, it adsorbs on the surface at 83 K. Which one of the following statements is correct? [PMT (HP) 2006]
(a) At 83 K, there is formation of monomolecular layer
(b) At 83 K, there is formation of multimolecular layers
(c) At 83 K, nitrogen molecules are held by chemical bonds
(d) At 83 K, nitrogen is adsorbed as atoms

Solution. Answer: (b) At 83 K, there is formation of multimolecular layers.

Teacher's Note: At 83 K nitrogen is physisorbed in multilayers by van der Waals' forces.

Exam Note: Answer (b): At 83 K, there is formation of

Question 111. What is the equation form of Langmuir adsorption isotherm under high pressure? [CET (Gujarat) 2006]
(a) x/m = a/b
(b) x/m = aP
(c) x/m = 1/(aP)
(d) x/m = b/a

Solution. Answer: (a) x/m = a/b. [Hint: x/m = aP/(a+bP); at high pressure a + bP ≈ bP, so x/m = aP/bP = a/b.]

Teacher's Note: At high P, bP is much greater than 1, so x/m approaches a/b.

Exam Note: Answer (a): x/m = a/b

Question 112. Freundlich adsorption isotherm is: [MHT-CET 2007; DCE 2009]
(a) x/m = KP1/n
(b) x = mKP1/n
(c) x/m = KP−n
(d) all of these

Solution. Answer: (d) all of these. (Printed key: (d); note that only forms (a) and (b) are the Freundlich equation, so check option (c) in your edition.)

Teacher's Note: Freundlich isotherm is x/m = kP^(1/n); the third form shown is not valid.

Exam Note: Answer (d): all of these

Question 113. Which of the following statements is incorrect regarding physisorption? (AIEEE 2009)
(a) It occurs because of van der Waals' forces
(b) More easily liquefiable gases are adsorbed readily
(c) Under high pressure it results into multimolecular layer on adsorbent surface
(d) Enthalpy of adsorption (ΔHadsorption) is low and positive

Solution. Answer: (d) Enthalpy of adsorption (ΔHadsorption) is low and positive.

Teacher's Note: Adsorption is exothermic, so ΔH of physisorption is negative.

Exam Note: Answer (d): Enthalpy of adsorption (ΔHadsorption) is low and

Question 114. Active charcoal is a good catalyst because: [Jamia Millia Islamia (Engg.) 2006]
(a) it is made of carbon atoms
(b) it is very reactive
(c) it has more adsorption power
(d) it has inert nature towards reagent

Solution. Answer: (c) it has more adsorption power.

Teacher's Note: Active charcoal's large adsorption power makes it a good catalyst support.

Exam Note: Answer (c): it has more adsorption power

Question 115. According to the adsorption theory of catalysis, the speed of reaction increases because: (AIIMS 2007)
(a) adsorption produces heat which increases the speed of the reaction
(b) adsorption lowers the activation energy of the reaction
(c) the concentration of reactant molecules at the active centres of the catalyst becomes high due to adsorption
(d) in the process of adsorption, the activation energy of the molecules becomes large

Solution. Answer: (b) adsorption lowers the activation energy of the reaction.

Teacher's Note: Adsorption concentrates reactants at active centres.

Exam Note: Answer (b): adsorption lowers the activation energy of the

Question 116. The Langmuir adsorption isotherm is deduced using the assumption: [CBSE (Med.) 2007]
(a) the adsorption sites are equivalent in their ability to adsorb the particles
(b) the heat of adsorption varies with coverage
(c) the adsorbed molecules interact with each other
(d) the adsorption takes place in multilayers

Solution. Answer: (a) the adsorption sites are equivalent in their ability to adsorb the particles.

Teacher's Note: Langmuir assumes equivalent sites and a monolayer without lateral interaction.

Exam Note: Answer (a): the adsorption sites are equivalent in their

Question 117. The efficiency of enzyme catalysis is due to its capacity to: [PET (Kerala) 2007]
(a) form a strong enzyme-substrate complex
(b) change the shape of the substrate
(c) lower the activation energy of the reaction
(d) form a colloidal solution in water
(e) decrease the bond energies in substrate molecules

Solution. Answer: (c) lower the activation energy of the reaction.

Teacher's Note: Enzymes lower the activation energy of the reaction.

Exam Note: Answer (c): lower the activation energy of the reaction

Question 118. Which type of phenomenon is used when coloured dye is removed from solution of sugar by charcoal? [CET (Gujarat) 2008]
(a) Absorption
(b) Adsorption
(c) Absorption and adsorption both
(d) None of the above

Solution. Answer: (b) Adsorption.

Teacher's Note: Dye removal by charcoal is adsorption on its surface.

Exam Note: Answer (b): Adsorption

Question 119. Shape selective catalysis is a reaction catalysed by: [PMT (Kerala) 2008]
(a) zeolites
(b) enzymes
(c) platinum
(d) Ziegler-Natta catalyst
(e) acids or bases

Solution. Answer: (a) zeolites.

Teacher's Note: Zeolites are shape selective because of their uniform pore sizes.

Exam Note: Answer (a): zeolites

Assertion-Reason Type Questions

Choose: (a) both A and R true and R is the correct explanation of A; (b) both A and R true but R is not the correct explanation of A; (c) A is correct but R is incorrect; (d) A and R are both incorrect.

Question AR.1. (A) A catalyst does not alter the equilibrium constant of the reaction.
(R) The catalyst forms a complex with the reactants and provides an alternate path with the lower energy of activation for the reaction; the forward and backward reactions are affected to the same extent. (AIIMS 2010)

Solution. Answer: (a). A and R both true; the alternate low-energy path with equal effect on both directions explains why K is unchanged.

Teacher's Note: Catalyst changes rate, not K: same path lowering for forward and backward reactions.

Exam Note: Answer (a); judge A and R separately.

Question AR.2. (A) Hydrolysis of ethyl acetate in presence of acid is a reaction of first order whereas in presence of alkali, it is a reaction of second order.
(R) Acid only acts as a catalyst whereas alkali acts as one of the reactants.

Solution. Answer: (a). Acid ester hydrolysis is pseudo first order (acid is only a catalyst); alkaline hydrolysis is second order (alkali is a reactant), so R explains A.

Teacher's Note: Acid is catalyst, alkali is reactant: order depends on what is consumed.

Exam Note: Answer (a); judge A and R separately.

Question AR.3. (A) In chemisorption, adsorption keeps on increasing with temperature.
(R) Heat keeps on providing more and more activation energy.

Solution. Answer: (d). A is false: chemisorption first increases and then decreases with temperature; R is not a correct reason.

Teacher's Note: Chemisorption peaks at an optimum temperature, then desorption dominates.

Exam Note: Answer (d); judge A and R separately.

Question AR.4. (A) A reaction cannot become fast by itself unless a catalyst is added.
(R) A catalyst always increases the speed of a reaction.

Solution. Answer: (d). A is false (a reaction can be sped up by heating) and R is false (negative catalysts slow reactions).

Teacher's Note: Heating also speeds reactions; catalysts can be negative too.

Exam Note: Answer (d); judge A and R separately.

Question AR.5. (A) A catalyst speeds up a reaction but doesn't participate in its mechanism.
(R) A catalyst provides an alternative path of lower activation energy to the reactants.

Solution. Answer: (d). A is false (a catalyst takes part, forming intermediates) while R is true; the book's key letter (d) is kept.

Teacher's Note: Catalysts form intermediates, so they do participate in the mechanism.

Exam Note: Answer (d); judge A and R separately.

Question AR.6. (A) Fruit formation process shows increase in rate with passage of time.
(R) Hydrolysis of ester is a homogeneous autocatalytic reaction. (AIIMS 1994)

Solution. Answer: (a). As per key: both statements true (autocatalysis explains the increasing rate).

Teacher's Note: Autocatalysis: rate increases as product accumulates.

Exam Note: Answer (a); judge A and R separately.

Question AR.7. (A) A catalyst speeds up the process without participating in its mechanism.
(R) A catalyst provides an alternative path of lower activation energy to the reactants. (AIIMS 2003)

Solution. Answer: (d). A is false (a catalyst takes part in the mechanism) while R is true; the book's key letter (d) is kept.

Teacher's Note: Catalyst participates through intermediates; the lower path is the true reason.

Exam Note: Answer (d); judge A and R separately.

Question AR.8. (A) Catalysts are always transition metals.
(R) Transition metals have a variable oxidation state.

Solution. Corrected: Answer: (d). A is false (catalysts need not be transition metals) while R is true; by the book's own scheme (compare 5 and 7) the letter is (d), not (b).

Teacher's Note: Catalysts are not restricted to transition metals; variable valency helps those that are.

Exam Note: Answer (d); judge A and R separately.

Question AR.9. (A) The mass of nickel catalyst recovered after being used in the hydrogenation of an oil is less than the mass of nickel added to the reaction.
(R) Catalyst take part in the reaction but are recovered in the end.

Solution. Corrected: Answer: (d). A is false (the catalyst is recovered unchanged in mass) while R is true; by the book's scheme (compare 5 and 7) the letter is (d), not (b).

Teacher's Note: Catalyst mass is recovered unchanged, though it may react temporarily.

Exam Note: Answer (d); judge A and R separately.

Question AR.10. (A) All enzymes are proteins, but all proteins are not enzymes.
(R) Enzymes are biocatalysts and posses a stable configuration having active sites.

Solution. Answer: (b). As per key: both true, R is not the explanation.

Teacher's Note: Enzymes are protein catalysts; most proteins are not enzymes.

Exam Note: Answer (b); judge A and R separately.

Question AR.11. (A) The reaction of oxalic acid with acidified KMnO4 is first slow and then proceeds with faster speed.
(R) Acidified KMnO4 is a strong oxidising agent.

Solution. Answer: (b). Mn2+ formed catalyses the reaction (autocatalysis); R is true but not the reason. As per key.

Teacher's Note: Mn2+ produced in oxalic acid titration catalyses itself: autocatalysis.

Exam Note: Answer (b); judge A and R separately.

Question AR.12. (A) For adsorption ΔG, ΔS and ΔH all have negative values.
(R) Adsorption is a spontaneous process accompanied by decrease in randomness.

Solution. Answer: (a). Adsorption is spontaneous with ΔG, ΔH, ΔS all negative because randomness decreases; R explains A.

Teacher's Note: Adsorption lowers entropy; exothermic enough for negative ΔG.

Exam Note: Answer (a); judge A and R separately.

Question AR.13. (A) A gas with higher critical temperature is adsorbed more than a gas with lower critical temperature.
(R) Higher critical temperature implies that the gas is more easily liquefiable.

Solution. Corrected: Answer: (a). Both statements are true and easier liquefaction (higher critical temperature) explains greater adsorption, so (a), not (b).

Teacher's Note: Easily liquefiable gases have high Tc and stronger van der Waals' adsorption.

Exam Note: Answer (a); judge A and R separately.

Question AR.14. (A) Physical adsorption of molecules on the surface requires activation energy.
(R) Because the bonds of adsorbed molecules are broken. (AIIMS 1994)

Solution. Answer: (d). Physisorption needs almost no activation energy and no bonds break; both statements false.

Teacher's Note: Physisorption has negligible activation energy and no bond breaking.

Exam Note: Answer (d); judge A and R separately.

Question AR.15. (A) Activity of an enzyme is pH dependent.
(R) Changes in pH affect the solubility of the enzyme in water. (AIIMS 2003)

Solution. Answer: (b). As per key: both true, R not the explanation.

Teacher's Note: Enzyme activity depends on pH by changing ionisation of active site.

Exam Note: Answer (b); judge A and R separately.

Question AR.16. (A) Alcohols are dehydrated to hydrocarbons in presence of acidic zeolite.
(R) Zeolites are porous catalyst. (AIIMS 2004)

Solution. Answer: (b). As per key: both true, R not the explanation.

Teacher's Note: Acidic zeolite dehydrates alcohols inside shape-selective pores.

Exam Note: Answer (b); judge A and R separately.

Question AR.17. (A) ZSM-5 is used as a catalyst in petrochemical industries.
(R) Zeolites are three-dimensional network silicates in which some silicon atoms are replaced by aluminium atoms.

Solution. Answer: (b). As per key: both true, R not the explanation.

Teacher's Note: ZSM-5 is an aluminosilicate zeolite used in petrochemical cracking.

Exam Note: Answer (b); judge A and R separately.

Question AR.18. (A) A catalyst increases the rate of a reaction.
(R) In presence of a catalyst, the activation energy of the reaction increases. [EAMCET (Engg.) 2007]

Solution. Corrected: Answer: (c). A is true but R is false (a positive catalyst lowers the activation energy), so (c), not (b).

Teacher's Note: Positive catalyst lowers Ea; only negative catalyst raises it.

Exam Note: Answer (c); judge A and R separately.

Question AR.19. (A) NO is used as a homogeneous catalyst for oxidation of CO: 2CO + O2 → 2CO2
(R) NO increases the rate of oxidation.

Solution. Answer: (b). As per key: both true, R not the explanation.

Teacher's Note: NO and CO, O2 are gases: homogeneous catalysis.

Exam Note: Answer (b); judge A and R separately.

Brain Storming Problems: Objective Questions for IIT Aspirants

Question BS.1. In presence of a catalyst, the activation energy is lowered by 3 kcal at 27°C. Hence, the rate of reaction will increase by:
(a) 32 times
(b) 243 times
(c) 2 times
(d) 148 times

Solution. Answer (from key): (d) 148 times. Rate ratio = antilog[ΔE/(2.303RT)] = antilog[3000/(2.303 × 2 × 300)] = antilog(2.171) ≈ 148.

Teacher's Note: Use k ratio = e^(ΔE/RT); convert kcal to cal with R = 2 cal.

Exam Note: Ratio = antilog(3000/(2.303×2×300)) ≈ 148.

Question BS.2. According to the adsorption theory of catalysis, the rate of reaction increases because:
(a) adsorption lowers the activation energy of the reaction
(b) concentration of reactant molecules at the active centres of the catalyst becomes high due to adsorption
(c) adsorption produces heat which increases the rate of reaction
(d) adsorption increases the activation energy of the reaction

Solution. Answer (from key): (b) concentration of reactant molecules at the active centres of the catalyst becomes high due to adsorption.

Teacher's Note: Adsorption theory: reactants concentrate on active centres of the solid.

Exam Note: Say: concentration at active centres rises.

Question BS.3. Which of the following characteristics is not correct for physical adsorption?
(a) Adsorption is spontaneous
(b) ΔH and ΔS are negative
(c) It is reversible in nature
(d) Degree of adsorption increases with temperature

Solution. Answer (from key): (d) Degree of adsorption increases with temperature.

Teacher's Note: Physisorption is exothermic, so adsorption falls as temperature rises.

Exam Note: Physisorption decreases with temperature.

Question BS.4. Freundlich adsorption isotherm gives a straight line on plotting:
(a) x/m vs. P
(b) log(x/m) vs. P
(c) log(x/m) vs. log P
(d) x/m vs. 1/P

Solution. Answer (from key): (c) log(x/m) vs. log P. Taking log of x/m = kP1/n gives log(x/m) = log k + (1/n) log P.

Teacher's Note: Logarithm linearises the power law: slope 1/n, intercept log k.

Exam Note: Plot log(x/m) against log P.

Question BS.5. Adsorption is an exothermic process. The amount of substance adsorbed should: (DPMT 2009)
(a) increase with decrease in temperature
(b) increase with increase in temperature
(c) decrease with decrease in temperature
(d) decrease with increase in temperature

Solution. Answer (from key): (d) decrease with increase in temperature.

Teacher's Note: Le Chatelier: heating shifts an exothermic equilibrium backwards.

Exam Note: Exothermic: adsorbed amount falls as T rises.

Question BS.6. In homogeneous catalytic reactions, there are three alternative paths A, B and C (shown in the figure). Which one of the following indicates the relative ease with which the reaction can take place?
Reaction coordinatePotential energyABC

(a) A > B > C
(b) C > B > A
(c) B > C > A
(d) A = B = C

Solution. Answer (from key): (b) C > B > A. [Hint: Activation energy in the different paths lies in the following sequence: C < B < A. Lesser is the activation energy, greater is the ease with which the reaction can take place. Hence C > B > A.]

Teacher's Note: Lower peak means lower activation energy and easier reaction.

Exam Note: Lowest barrier path C is easiest.

Question BS.7. For the reaction (A → B + C); the energy profile diagram is given in the figure. The decrease in energy of activation in presence of catalyst is:
Reaction coordinatePotential energyxzpIn absence of catalystIn presence of catalyst (dashed)AB + Cy

(a) z
(b) z − p
(c) y − z
(d) z − x

Solution. Answer (from key): (b) z − p. Activation energy without catalyst = z and with catalyst = p, so the decrease is z − p.

Teacher's Note: Subtract catalysed activation energy from uncatalysed one.

Exam Note: Decrease in Ea = z − p.

Question BS.8. Which of the following represents physical adsorption?
Tx/m(a)Tx/m(b)Tx/m(c)Tx/m(d)

(a) Plot (a): x/m decreases with temperature
(b) Plot (b): x/m increases linearly with temperature
(c) Plot (c): x/m rises then falls with temperature
(d) Plot (d): x/m has two peaks with temperature

Solution. Answer (from key): (a) Plot (a): x/m decreases with temperature.

Teacher's Note: Physisorption isobar falls continuously; the hump belongs to chemisorption.

Exam Note: Physisorption isobar decreases monotonically.

Question BS.9. The colloidal system consisting of a liquid adsorbate in a solid adsorbent is termed as:
(a) aerosol
(b) foam
(c) emulsion
(d) gel

Solution. Answer (from key): (d) gel.

Teacher's Note: Colloid names: liquid dispersed in solid is a gel.

Exam Note: Liquid in solid is a gel.

Question BS.10. Which can adsorb a larger volume of hydrogen gas?
(a) Colloidal solution of palladium
(b) Finely divided nickel
(c) Finely divided platinum
(d) Colloidal Fe(OH)3

Solution. Answer (from key): (a) Colloidal solution of palladium.

Teacher's Note: Colloidal metals have very large surface area; Pd adsorbs hydrogen strongly.

Exam Note: Colloidal Pd adsorbs most hydrogen.

Question BS.11. Which is false for a catalyst?
(a) A catalyst can initiate a reaction
(b) It does not alter the position of equilibrium in a reversible reaction
(c) A catalyst remains unchanged in quality and composition at the end of reaction
(d) Catalysts are sometimes very specific in reaction

Solution. Answer (from key): (a) A catalyst can initiate a reaction.

Teacher's Note: A catalyst only changes the rate of a feasible reaction.

Exam Note: Catalyst cannot initiate a reaction.

Question BS.12. The curve showing the variation of pressure with temperature for a given amount of adsorption is called:
(a) adsorption isobar
(b) adsorption isotherm
(c) adsorption isostere
(d) adsorption isochore

Solution. Answer (from key): (c) adsorption isostere.

Teacher's Note: Isostere: P versus T at constant amount adsorbed.

Exam Note: Constant amount adsorbed: isostere.

Question BS.13. Which of the following statements is incorrect?
(a) Adsorption always leads to a decrease in enthalpy and entropy of the system
(b) Adsorption arises due to unsaturation of valence forces of atoms or molecules on the surface
(c) Adsorption increases with rise in temperature
(d) Adsorption decreases the surface energy

Solution. Answer (from key): (c) Adsorption increases with rise in temperature.

Teacher's Note: Adsorption falls on heating because it is exothermic.

Exam Note: Adsorption does not always increase with temperature.

Question BS.14. Which of the following gas molecules have maximum value of enthalpy of physisorption?
(a) C2H6
(b) Ne
(c) H2O
(d) H2

Solution. Answer (from key): (c) H2O. [Hint: Since H2O can be liquefied easily, hence it will have the maximum enthalpy of physisorption.]

Teacher's Note: Higher liquefiability means stronger van der Waals' attraction.

Exam Note: Most easily liquefied gas, water.

Question BS.15. Which of the following gases is adsorbed most by activated charcoal? [AMU (Med.) 2010]
(a) CO2
(b) N2
(c) CH4
(d) H2

Solution. Answer (from key): (a) CO2. [Hint: CO2 is an easily liquefiable gas, hence it is adsorbed most by charcoal.]

Teacher's Note: Compare critical temperatures: higher means more adsorption.

Exam Note: Pick the easily liquefiable gas, CO2.

Question BS.16. Which of the following factors are responsible for the increase in the rate of a surface catalysed reaction? [PMT (Kerala) 2006] I. A catalyst provides proper orientation for the reactant molecules to react. II. Heat of adsorption of reactants on a catalyst helps reactant molecules to overcome activation energy. III. The catalyst increases the activation energy of the reaction. IV. Adsorption increases the local concentration of reactant molecules on the surface of the catalyst.
(a) I and II
(b) I and III
(c) II and IV
(d) I, II and III
(e) I, II and IV

Solution. Answer (from key): (e) I, II and IV.

Teacher's Note: Statement III is wrong: catalysts lower activation energy.

Exam Note: Correct statements are I, II and IV.

Question BS.17. In Langmuir's model of adsorption of a gas on a solid surface: (AIEEE 2006)
(a) the rate of dissociation of adsorbed molecules from the surface does not depend on the surface covered
(b) the adsorption at a single site on the surface may involve multiple molecules at the same time
(c) the mass of gas striking a given area of surface is proportional to the pressure of the gas
(d) the mass of gas striking a given area of surface is independent of the pressure of the gas

Solution. Answer (from key): (c) the mass of gas striking a given area of surface is proportional to the pressure of the gas.

Teacher's Note: Collision rate on a surface is proportional to gas pressure.

Exam Note: Gas striking surface is proportional to pressure.

Question BS.18. An enzyme [E] is combined with the substrate [S] as follows: E + S ⇌ ES (k1, k−1); ES → P + E (k2). The overall reaction rate is given by Rate = Vmax[S]/(Km + [S]) and the rate of reaction varies with substrate concentration as shown in the figure. The order of reaction at point A is:
[S]Rate0.5 Vmax1.0 Vmax1.5 VmaxAB

(a) one
(b) two
(c) three
(d) zero

Solution. Answer (from key): (a) one. Point A lies in the low-[S] part of the curve where rate rises almost in proportion to [S]. (Strictly, at A the rate is Vmax/2, i.e. [S] = Km, so the order is fractional between 0 and 1.)

Teacher's Note: Michaelis-Menten: first order at low [S], zero order at high [S].

Exam Note: Low [S] region is first order.

Question BS.19. Which type of graph gives straight line in Langmuir adsorption isotherm? [CET (Gujarat) 2008]
(a) x/m → 1/P
(b) m/x → 1/P
(c) log(x/m) → 1/P
(d) log(x/m) → P

Solution. Answer (from key): (b) m/x → 1/P. From x/m = aP/(1+bP): m/x = 1/(aP) + b/a, a straight line in m/x versus 1/P.

Teacher's Note: Invert the Langmuir equation to get a linear form.

Exam Note: Langmuir: plot m/x against 1/P.

Question BS.20. Plot of log(x/m) against log P is a straight line inclined at an angle of 45°. When the pressure is 0.5 atm and Freundlich parameter, k is 10, the amount of solute adsorbed per gram of adsorbent will be: (log 5 = 0.6990) [PET (Kerala) 2008]
(a) 1 g
(b) 2 g
(c) 3 g
(d) 5 g
(e) 2.5 g

Solution. Answer (from key): (d) 5 g. [Hint: log(x/m) = log k + (1/n) log P. 1/n = tan 45° = 1; log k = log 10 = 1; x/m = k(P)1/n = 10(0.5)1 = 5. When m = 1 g, x = 5 g.]

Teacher's Note: Slope of 45° means 1/n = 1; substitute k and P.

Exam Note: x/m = 10 × 0.5 = 5 g.

Question BS.21. Following graphs will be true when: (log(x/m) versus log P is a horizontal line)
log Plog(x/m)

(a) P = 0
(b) P = 1
(c) 1/n = 0
(d) 1/n = ∞

Solution. Answer (from key): (c) 1/n = 0. A horizontal line has zero slope; slope of the log-log plot is 1/n, so 1/n = 0.

Teacher's Note: Slope of Freundlich log plot is 1/n.

Exam Note: Horizontal line means 1/n = 0.

Linked Comprehension Type Questions

Question Passage 1, Q1. Passage 1. Only the surface atoms in an adsorbent play an active role in adsorption. These atoms possess some residual forces like van der Waals' forces and chemical forces. In the process of adsorption, weak adsorbate is substituted by strong adsorbate. Activated charcoal used in gas mask is already exposed to the atmospheric air, so the gases and water vapours in air are adsorbed on its surface. When the mask is exposed to chlorine atmosphere, the gases are displaced by chlorine. Porous and finely powdered solids, e.g., charcoal and Fuller's earth adsorb more as compared to the hard non-porous material. It is due to this property that the powdered charcoal is used in gas masks. In general, easily liquefiable gases like CO2, NH3, Cl2 and SO2, etc., are adsorbed to a greater extent than the elemental gases, e.g., H2, N2, O2, He, etc.
Gas masks work on the principle of:
(a) physical adsorption
(b) chemical adsorption
(c) both physical and chemical adsorptions
(d) absorption

Solution. Answer (from key): (c) both physical and chemical adsorptions.

Teacher's Note: Masks adsorb gases physically and some chemically.

Exam Note: Gas mask uses both adsorption types.

Question Passage 1, Q2. Which of the following gases will be most easily adsorbed by the charcoal in the gas mask?
(a) H2
(b) O2
(c) N2
(d) SO2

Solution. Answer (from key): (d) SO2.

Teacher's Note: SO2 is easily liquefiable, so strongly adsorbed.

Exam Note: SO2: easily liquefiable gas.

Question Passage 1, Q3. Gas mask contains:
(a) charcoal granules
(b) powdered charcoal
(c) calcium carbonate
(d) Fuller's earth

Solution. Answer (from key): (b) powdered charcoal.

Teacher's Note: Powdered form gives large surface area.

Exam Note: Powdered charcoal.

Question Passage 1, Q4. Which of the following gas molecules has maximum value of enthalpy of physisorption in a gas mask?
(a) C2H6
(b) Ne
(c) H2O
(d) H2

Solution. Answer (from key): (c) H2O.

Teacher's Note: Water vapour is most easily liquefied of these.

Exam Note: H2O has highest enthalpy.

Question Passage 1, Q5. Which of the following gases will substitute O2 from adsorbed charcoal?
(a) H2
(b) N2
(c) Ar
(d) Cl2

Solution. Answer (from key): (d) Cl2.

Teacher's Note: Strongly adsorbed Cl2 displaces weakly adsorbed gases.

Exam Note: Cl2 displaces adsorbed O2.

Question Passage 2, Q1. Passage 2. Freundlich adsorption isotherm is obeyed by the adsorptions where the adsorbate forms a multimolecular layer on the surface of adsorbent. In such cases, the degree of adsorption varies linearly with pressure but at high pressure, it becomes independent of pressure. The relation of Freundlich adsorption isotherm is x/m = kP1/n, where k and n are constants. Langmuir adsorption isotherm is obeyed by the adsorption where the adsorbate forms only a unimolecular adsorbed layer. The mathematical relation of Langmuir adsorption isotherm is x/m = aP/(1 + bP).
True or false: When log(x/m) is plotted against log P, we get a straight line with slope (1/n).

Solution. Answer (from key): True. log(x/m) = log k + (1/n) log P.

Teacher's Note: Slope is 1/n, intercept log k.

Exam Note: True: slope equals 1/n.

Question Passage 2, Q2. True or false: The degree of adsorption (x/m) at low pressure will be: x/m = a.

Solution. Answer (from key): False. At low pressure bP is much less than 1, so x/m = aP (proportional to pressure); x/m = a/b at high pressure.

Teacher's Note: Low pressure means linear in P, not constant.

Exam Note: False: x/m = aP at low P.

Question Passage 2, Q3. True or false: When (m/x) is plotted against 1/P, we get a straight line with slope (1/a) and intercept (b/a).

Solution. Answer (from key): True. m/x = 1/(aP) + b/a.

Teacher's Note: Invert Langmuir equation: slope 1/a, intercept b/a.

Exam Note: True: from m/x = 1/(aP)+b/a.

Question Passage 2, Q4. True or false: In the mathematical relation of Freundlich adsorption isotherm, the value of (1/n) is 0 ≤ 1/n ≤ 1.

Solution. Answer (from key): True. 1/n varies between 0 (independent of pressure) and 1 (directly proportional to pressure).

Teacher's Note: 1/n of 0 and 1 are the two limits.

Exam Note: True: 0 ≤ 1/n ≤ 1.

Question Passage 2, Q5. True or false: Freundlich adsorption isotherm is valid for chemisorption.

Solution. Answer (from key): False. It describes multilayer physisorption (the passage's own condition).

Teacher's Note: Freundlich is physisorption on multilayers.

Exam Note: False: valid for physisorption.

Self Assessment, Assignment No. 13

Section I: Straight Objective Type Questions

Question SA.1. At high pressure, Langmuir adsorption isotherm takes the form:
(a) x/m = aP/(1+bP)
(b) x/m = a/b
(c) x/m = aP
(d) m/x = b/a + 1/(aP)

Solution. Answer (from key): (b) x/m = a/b.

Teacher's Note: At high P, bP much greater than 1.

Exam Note: x/m = a/b at high P.

Question SA.2. Which of the following is used to adsorb water?
(a) Silica gel
(b) Anhydrous CaCl2
(c) Coal
(d) Coke

Solution. Answer (from key): (a) Silica gel.

Teacher's Note: Silica gel adsorbs; CaCl2 absorbs.

Exam Note: Silica gel adsorbs water.

Question SA.3. Select the correct option for the following graph (adsorption isotherms x/m versus pressure at T1, T2, T3; the T1 curve is the highest and T3 the lowest):
Pressurex/mT1T2T3

(a) T1 > T2 > T3
(b) T1 = T2 = T3
(c) T1 < T2 < T3
(d) T1 > T2 < T3

Solution. Answer (from key): (c) T1 < T2 < T3.

Teacher's Note: Adsorption falls with temperature; highest curve is lowest T.

Exam Note: Highest isotherm = lowest temperature.

Question SA.4. Which of the following substances adsorbs H2 gas most strongly?
(a) Platinum black
(b) Nickel powder
(c) Activated charcoal
(d) Silica gel

Solution. Answer (from key): (a) Platinum black.

Teacher's Note: Platinum black has high surface area and affinity for H2.

Exam Note: Platinum black adsorbs H2 best.

Question SA.5. The order of volume of gases NH3, CO2 and CH4 adsorbed by one gram of charcoal at 298 K is:
(a) CH4 > CO2 > NH3
(b) NH3 > CH4 > CO2
(c) NH3 > CO2 > CH4
(d) CO2 > NH3 > CH4

Solution. Answer (from key): (c) NH3 > CO2 > CH4.

Teacher's Note: Order follows ease of liquefaction.

Exam Note: NH3 > CO2 > CH4.

Question SA.6. Activated charcoal is prepared by:
(a) adding Ba3(PO4)2 to charcoal
(b) treatment with conc. HNO3
(c) heating charcoal with steam to make it more porous
(d) adding silica to charcoal

Solution. Answer (from key): (c) heating charcoal with steam to make it more porous.

Teacher's Note: Steam activation opens pores.

Exam Note: Steam heating makes charcoal porous.

Question SA.7. In the manufacture of H2SO4 by contact process the presence of As2O3 acts as:
(a) catalytic promoter
(b) induced catalyst
(c) catalytic poison
(d) autocatalyst

Solution. Answer (from key): (c) catalytic poison.

Teacher's Note: Arsenic compounds poison the platinum catalyst.

Exam Note: As2O3 is a catalytic poison.

Question SA.8. In Rosenmund reactions, presence of BaSO4 acts as ....... for Pd.
(a) promoter
(b) moderator
(c) inhibitor
(d) poison

Solution. Answer (from key): (d) poison.

Teacher's Note: BaSO4 deactivates Pd so reduction stops at aldehyde.

Exam Note: BaSO4 is a poison for Pd.

Section II: Multiple Answers Type Objective Questions

Question SA.9. Which of the following are correct about a catalyst?
(a) It participates in the reaction but is recovered at last
(b) It does not affect ΔG
(c) It does not affect ΔH
(d) It alters the mechanism of reaction

Solution. Answer (from key): (a, b, c, d).

Teacher's Note: All four statements hold for a catalyst.

Exam Note: Catalyst: no change in ΔG, ΔH.

Question SA.10. Which of the following statements are correct?
(a) Physical adsorption is of multimolecular layer
(b) Degree of chemical adsorption increases with increase in temperature
(c) Adsorption increases the surface energy
(d) Sometimes solvent is adsorbed in preference to solute

Solution. Answer (from key): (a, b, d).

Teacher's Note: Adsorption decreases surface energy, so (c) is false.

Exam Note: Adsorption lowers surface energy.

Question SA.11. Which of the following are zeolites?
(a) Granite
(b) Faujasite
(c) Natrolite
(d) Thomisite

Solution. Answer (from key): (b, c, d).

Teacher's Note: Granite is a rock, not a zeolite.

Exam Note: Faujasite, natrolite, thomsonite.

Question SA.12. Which of the following act as negative catalysts?
(a) Ethanol in oxidation of chloroform
(b) Tetra ethyl lead used as antiknocking agent
(c) Glycerol in the decomposition of H2O2
(d) Fe in the formation of ammonia by Haber's process

Solution. Answer (from key): (a, b, c).

Teacher's Note: Fe in Haber's process is a positive catalyst.

Exam Note: Fe is a positive catalyst.

Question SA.13. Select the correct statements about enzymes:
(a) Enzymes are biological catalysts found in organisms
(b) All enzymes are proteins
(c) Enzymes can catalyse any reaction
(d) Enzymes' activity is optimum at 27°C

Solution. Answer (from key): (a, b, d).

Teacher's Note: Enzymes are specific, so (c) is false.

Exam Note: Enzymes are specific, not universal.

Section III: Matrix-Matching Type Questions

Question SA.14. Match the Column-I with Column-II.
Column-I (Process)Column-II (Catalyst)
(a) Cracking of hydrocarbons(p) Ni
(b) Ostwald's process(q) NO
(c) Sulphuric acid manufacture(r) Pt
(d) Catalytic converter(s) NiO

Solution. Answer (from key): (a)–r; (b)–r; (c)–q, r; (d)–p, s. Match processes with catalysts as given in the key.

Teacher's Note: Ostwald process uses Pt.

Exam Note: Process-catalyst pairs: Ostwald uses platinum gauze.

Question SA.15. Match the Column-I with Column-II.
Column-I (Catalyst)Column-II (Process)
(a) Ni(p) Cracking of hydrocarbons
(b) AlCl3(q) Fischer-Tropsch process
(c) Co/Al2O3(r) Hydrogenation of oil
(d) Zeolite(s) Friedel-Crafts reaction

Solution. Answer (from key): (a)–r; (b)–s; (c)–q; (d)–p. Ni hydrogenates oils, AlCl3 is the Friedel-Crafts catalyst, Co/Al2O3 is the Fischer-Tropsch catalyst, and zeolite cracks hydrocarbons.

Teacher's Note: Ni hydrogenation; zeolite cracking.

Exam Note: Nickel catalyses hydrogenation of oils.

Question SA.16. Match the Column-I with Column-II.
Column-IColumn-II
(a) Chemisorption(p) Exothermic
(b) Physisorption(q) Endothermic
(c) Desorption(r) Removal of adsorbed substance
(d) Activation of adsorbent(s) Specific

Solution. Answer (from key): (a)–p, s; (b)–p; (c)–q, r; (d)–q. Chemisorption is exothermic and specific; physisorption is exothermic; desorption is endothermic removal of adsorbate; activation of adsorbent (heating) is endothermic.

Teacher's Note: Adsorption exothermic; desorption endothermic.

Exam Note: Desorption is endothermic.

JEE Mathematics: OP Tandon Solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 13 Adsorption And Catalysis

Download OP Tandon Solutions for JEE

Explore reliable mathematical solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 13 Adsorption And Catalysis tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for JEE

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Explore More Study Resources for JEE Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.