Download JEE Chemistry OP Tandon Textbook Solutions: Chapter 12 Electrochemistry
Access comprehensive textbook solutions for Chapter 12 Electrochemistry using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access OP Tandon Textbook Answers and Solutions
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Chapter 12 Electrochemistry - Numerical Problems 76-108, Objective Questions, Brain Storming and Self Assessment
Numerical Problems
Problem 76. An excess of Hg was added to 10-3 M acidified solution of Fe3+ ions. It was found that only 4.6% of the ions remained as Fe3+ at equilibrium at 25°C. Calculate E° for 2Hg | Hg22+ at 25°C for 2Hg + 2Fe3+ ⇌ Hg22+ + 2Fe2+.
Solution. At equilibrium [Fe3+] = 4.6×10-5 M, [Fe2+] = 9.54×10-4 M, [Hg22+] = 4.77×10-4 M. K = (4.77×10-4)(9.54×10-4)2/(4.6×10-5)2 ≈ 0.205. E°cell = (0.0591/2) log K = -0.0203 V = E°(Fe3+/Fe2+) - E°(Hg22+/Hg), so E°(Hg22+/Hg) = 0.771 + 0.0203 = 0.791 V. Hence for 2Hg → Hg22+ + 2e-, E° = -0.7912 volt.
Teacher's Note: Find K from equilibrium amounts, convert to E°cell, subtract from the Fe couple; oxidation potential reverses sign.
Exam Note: Reverse sign for oxidation; note n = 2.
Problem 77. The emf of the cell Ag | AgI (0.05 M) KI || (0.05 M) AgNO3 | Ag is 0.788 volt. Calculate the solubility product of AgI.
Solution. Both electrodes are Ag, so E° = 0 and E = 0.0591 log([Ag+]cathode/[Ag+]anode). Cathode [Ag+] = 0.05 M. 0.788 = 0.0591 log(0.05/[Ag+]anode), so [Ag+]anode ≈ 2.2×10-15 M, and Ksp = [Ag+][I-] = 2.2×10-15 × 0.05 ≈ 1.1×10-16. Answer: 1.10×10-16 (using 0.059; with 0.0591 the value is 1.16×10-16).
Teacher's Note: Concentration cell: the anode [Ag+] is fixed by AgI solubility, so Ksp = [Ag+][I-].
Exam Note: Use [I⁻] = 0.05 M for K_sp.
Problem 78. At equimolar concentrations of Fe2+ and Fe3+, what must [Ag+] be so that the voltage of the galvanic cell made from Ag+/Ag and Fe3+/Fe2+ electrodes equals zero? The reaction is Fe2+ + Ag+ ⇌ Fe3+ + Ag. Determine the equilibrium constant at 25°C for the reaction. (Given: E°Ag+/Ag = 0.799 volt and E°Fe3+/Fe2+ = 0.771 volt)
Solution. E°cell = E°(Ag+/Ag) - E°(Fe3+/Fe2+) = 0.799 - 0.771 = 0.028 V for Fe2+ + Ag+ ⇌ Fe3+ + Ag. Q = [Fe3+]/([Fe2+][Ag+]). At Ecell = 0: 0 = 0.028 - 0.0591 log(1/[Ag+]) with equal Fe concentrations, so log[Ag+] = -0.028/0.0591 → [Ag+] = 0.34 M. log K = nE°/0.0591 = 0.028/0.0591 = 0.474, K = 3.0. Answer: [Ag+] = 0.34 M; K = 3.0.
Teacher's Note: Zero emf means equilibrium, so Q = K and [Ag⁺] = 1/K when Fe²⁺ equals Fe³⁺.
Exam Note: Take E° as +0.028 V for oxidation of Fe²⁺ by Ag⁺.
Problem 79. Using the Nernst equation for the cell reaction Pb + Sn2+ → Pb2+ + Sn, calculate the ratio [Pb2+]/[Sn2+] for which Ecell = 0. (Given: E°Pb/Pb2+ = 0.13 volt and E°Sn2+/Sn = -0.14 volt)
Solution. E°cell = -0.14 - (-0.13) = -0.01 V. 0 = -0.01 - (0.0591/2) log([Pb2+]/[Sn2+]), so log ratio = -0.01×2/0.0591 = -0.338 and the ratio = 0.46. Corrected: the book prints 0.5 (a rounded value); the calculated ratio is ≈ 0.46 (about 0.5).
Teacher's Note: Set E = 0 (equilibrium) so log Q = nE°/0.0591; Q is the concentration ratio.
Exam Note: Give the ratio ≈ 0.46, not rounded up.
Problem 80. Determine the potential of a Daniell cell, initially containing 1.00 L each of 1.0 M copper(II) ion and 1.0 M zinc(II) ion, after passage of 105 coulomb charge. The E° of the Daniell cell is 1.10 volt.
Solution. 105 C = 105/(2×96500) = 0.518 mol of Zn dissolved and Cu deposited. [Zn2+] = 1.518 M, [Cu2+] = 0.482 M. E = 1.10 - (0.0591/2) log(1.518/0.482) = 1.10 - 0.0148×... = 1.10 - 0.0148 = 1.085 ≈ 1.09 volt.
Teacher's Note: Faraday converts charge to moles reacted; update both ion concentrations before Nernst.
Exam Note: Zn²⁺ rises, Cu²⁺ falls; E decreases.
Problem 81. Calculate the standard potential for the reaction Hg2Cl2 + Cl2 → 2Hg2+ + 4Cl-. (Given: Hg2Cl2 + 2e- → 2Hg + 2Cl-, E° = 0.270 V; Hg22+ → 2Hg2+ + 2e-, E° = -0.92 V; 2Hg → Hg22+ + 2e-, E° = -0.79 V; Cl2 + 2e- → 2Cl-, E° = 1.36 V)
Solution. Add the first three steps (each n = 2): Hg2Cl2 → 2Hg2+ + 2Cl- + 2e-, E° = 0.270 - 0.79 - 0.92 = -1.44 V. Coupling with Cl2 + 2e- → 2Cl- (1.36 V): E° = -1.44 + 1.36 = -0.08 volt.
Teacher's Note: Add half-reactions with equal n; potentials then add directly.
Exam Note: Cancel electrons and Hg species before adding E°.
Problem 82. Given Cu2+ + e- → Cu+, E° = 0.15 volt; Cu+ + e- → Cu, E° = 0.5 volt. Calculate the potential for Cu2+ + 2e- → Cu.
Solution. Free energies add: E° = (n1E1 + n2E2)/(n1 + n2) = (1×0.15 + 1×0.5)/2 = 0.325 volt.
Teacher's Note: Potentials are not additive for different n; ΔG° values are.
Exam Note: Use ΔG° = -nFE°, then divide by total n.
Problem 83. What is the standard electrode potential for the electrode MnO4-/MnO2 in solution? (Given: E°MnO4-/Mn2+ = 1.51 volt, E°MnO2/Mn2+ = 1.23 volt)
Solution. MnO4- + 8H+ + 5e- → Mn2+ + 4H2O (1.51 V); MnO2 + 4H+ + 2e- → Mn2+ + 2H2O (1.23 V). Subtracting: MnO4- + 4H+ + 3e- → MnO2 + 2H2O. 3E° = 5×1.51 - 2×1.23 = 7.55 - 2.46 = 5.09, so E° = 5.09/3 = 1.70 volt.
Teacher's Note: Subtract half-reactions as free energies (nE°), then divide by the new n = 3.
Exam Note: Show 5E₁ − 2E₂ over 3.
Problem 84. What ratio of Pb2+ to Sn2+ concentration is needed to reverse the cell reaction Sn(s) + Pb2+(aq) → Sn2+(aq) + Pb(s)? (E°Sn2+/Sn = -0.136 volt and E°Pb2+/Pb = -0.126 volt)
Solution. E°cell = -0.126 - (-0.136) = 0.010 V. E = 0.010 - (0.0591/2) log([Sn2+]/[Pb2+]). The reaction reverses when E < 0: log([Sn2+]/[Pb2+]) > 0.338, i.e. [Pb2+]/[Sn2+] < 0.459. Answer: [Pb2+]/[Sn2+] < 0.458 (book value; calculated 0.459).
Teacher's Note: Reversal means E becomes negative, so Q must exceed K.
Exam Note: Write inequality, not equality.
Problem 85. For the cell Mg | Mg2+ || Ag+ | Ag, calculate the equilibrium constant at 25°C and the maximum work that can be obtained during the operation of the cell. (Given: E°Mg/Mg2+ = 2.37 volt and E°Ag2+/Ag = 0.80 volt)
Solution. E°cell = 2.37 + 0.80 = 3.17 V, n = 2. log K = nE°/0.0591 = 2×3.17/0.0591 = 107.28, so K ≈ 1.9×10107. Wmax = nFE° = 2×96500×3.17 = 6.118×105 J. Corrected: K = 1.9×10107 (the book prints 2.86×10107, which does not match log K = 107.28); Wmax = 6.118×105 J as printed.
Teacher's Note: K comes from log K = nE°/0.0591; maximum work is −ΔG° = nFE°.
Exam Note: Use n = 2 in both K and W.
Problem 86. Determine the potential for the cell Pt | Fe2+, Fe3+ || Cr2O72-, Cr3+, H+ | Pt in which [Fe2+] and [Fe3+] are 0.5 M and 0.75 M respectively and [Cr2O72-], [Cr3+] and [H+] are 2 M, 4 M and 1 M respectively. Given Fe3+ + e- → Fe2+, E° = 0.770 V; 14H+ + 6e- + Cr2O72- → 2Cr3+ + 7H2O, E° = 1.35 V.
Solution. Cell reaction: Cr2O72- + 14H+ + 6Fe2+ → 2Cr3+ + 6Fe3+ + 7H2O, n = 6, E° = 1.35 - 0.77 = 0.58 V. Q = [Cr3+]2[Fe3+]6/([Cr2O72-][H+]14[Fe2+]6) = 16×(1.5)6/2 ≈ 91. E = 0.58 - (0.0591/6) log 91 = 0.58 - 0.019 = 0.56 volt.
Teacher's Note: Balance electrons (6 Fe²⁺ per dichromate) so Q carries sixth powers of Fe concentrations.
Exam Note: Raise each species to its coefficient in Q.
Problem 87. For the measurement of the solubility product of AgCl the following cell is constructed: Ag | AgCl || KCl (0.1 M) || AgNO3 (0.1 M) | Ag. The emf of the cell is 0.45 volt. In the cell, KCl is dissociated to the extent of 83% and AgNO3 is dissociated to the extent of 86%. Calculate the solubility product of AgCl at 298 K.
Solution. Both electrodes are Ag (E° = 0). [Ag+]cathode = 0.1×0.86 = 0.086 M; [Cl-] = 0.1×0.83 = 0.083 M so [Ag+]anode = Ksp/0.083. E = 0.0591 log([Ag+]cathode/[Ag+]anode) = 0.45 gives [Ag+]anode = 0.086/107.61 = 2.1×10-9 M. Ksp = 2.1×10-9 × 0.083 = 1.735×10-10.
Teacher's Note: Use degree of dissociation to get actual ion concentrations before applying the concentration-cell equation.
Exam Note: Do not use 0.1 M directly.
Problem 88. Excess of AgCl is added to 0.1 M solution of KBr at 298 K. Calculate the equilibrium concentrations of Br- and Cl- ions. (E°Cl-/AgCl/Ag = 0.222 volt, E°Br-/AgBr/Ag = 0.095 volt)
Solution. AgCl + Br- ⇌ AgBr + Cl-. E° = 0.222 - 0.095 = 0.127 V, log K = 0.127/0.0591 = 2.149, K = 141. K = x/(0.1 - x) gives x = 0.0993. [Cl-] = 0.09929 mol L-1, [Br-] = 0.00071 mol L-1.
Teacher's Note: The solid-solid exchange reaction has K = [Cl⁻]/[Br⁻]; E° of the two Ag-halide electrodes gives K.
Exam Note: Define x as Cl⁻ formed; solve K = x/(0.1−x).
Problem 89. The emf of the cell Cu | CuSO4 (a = 0.1) || CuSO4 (a = x) | Cu is -0.03 V at 25°C. Calculate the activity of copper sulphate solution in the right hand side electrode.
Solution. The E° terms cancel, so for a Cu2+ concentration cell E = (0.0591/2) log(aright/aleft) = (0.0591/2) log(x/0.1). With E = -0.03 V: log(x/0.1) = -0.03×2/0.0591 = -1.015, so x = 0.1×0.0962 = 0.009616 mol L-1.
Teacher's Note: Concentration cell: E° = 0, only the activity ratio matters; negative emf means right side is more dilute.
Exam Note: State that E° cancels.
Problem 90. The cell Pt | H2 (1 atm) || H+ (pH = x) || normal calomel electrode, has an emf of 0.67 volt at 25°C. Calculate the pH of the solution. The oxidation potential of calomel electrode on the hydrogen scale is -0.28.
Solution. Reduction potential of the calomel electrode = +0.28 V. Ecell = Ecalomel - EH2 = 0.67, so EH = 0.28 - 0.67 = -0.39 V. EH = -0.0591 pH, so pH = 0.39/0.0591 = 6.61.
Teacher's Note: Hydrogen electrode potential is −0.0591·pH; subtract from calomel potential to match the measured emf.
Exam Note: Take the sign of the calomel potential carefully.
Problem 91. The emf of the cell Ag | AgI, KI (0.05 M) || AgNO3 (0.05 M) | Ag is 0.788 volt. Calculate the solubility product of AgI.
Solution. Cathode [Ag+] = 0.05 M; anode [Ag+] = Ksp/0.05. E = 0.0591 log(0.05×0.05/Ksp) = 0.788 gives Ksp ≈ 1.1×10-16. Answer: 1.101×10-16 (printed; 0.0591 gives 1.16×10-16).
Teacher's Note: Same concentration-cell idea as Problem 77, with AgI saturating the anode compartment.
Exam Note: E° = 0 for identical Ag electrodes.
Problem 92. The standard reduction potential for Cu2+/Cu is +0.34 V. Calculate the reduction potential at pH = 14 for the above couple. Ksp of Cu(OH)2 is 1.0×10-19.
Solution. At pH 14, [OH-] = 1 M so [Cu2+] = Ksp/[OH-]2 = 1.0×10-19 M. E = 0.34 + (0.0591/2) log(10-19) = 0.34 - 0.561 = -0.22 V.
Teacher's Note: Precipitation fixes [Cu²⁺] through K_sp; then apply Nernst for the Cu²⁺/Cu electrode.
Exam Note: Use [OH⁻] = 1 M at pH 14.
Problem 93. Calculate the potential of a cell in which H electrode is immersed in a solution of pH 3.5 and in a solution of pH 10.7.
Solution. E = 0.0591 (pH2 - pH1) = 0.0591 × (10.7 - 3.5) = 0.0591 × 7.2 = 0.4255 volt.
Teacher's Note: A hydrogen concentration cell gives E = 0.0591 × ΔpH at 25°C.
Exam Note: Use n = 1 and the pH difference.
Problem 94. Calculate the emf of the cell Cl2 (1 atm) | NaCl (aq) | Cl2 (0.1 atm).
Solution. Gas concentration cell, E° = 0, n = 2. The pressure ratio is 10, so |E| = (0.0591/2) log 10 = 0.0295 V. For the cell as written, E = -0.0295 volt (as printed).
Teacher's Note: Pressure ratio replaces concentration ratio in a gas concentration cell; n = 2 for Cl₂.
Exam Note: Sign follows which electrode is anode.
Problem 95. Free energy change for the reaction H2(g) + 2AgCl(s) → 2Ag(s) + 2H+(aq) + 2Cl-(aq) is -10.26 kcal mol-1 at 25°C. A cell using the above reaction is operated at 25°C under PH2 = 1 atm, [H+] and [Cl-] = 0.1. Calculate the emf of the cell.
Solution. E° = -ΔG°/nF = 10.26×4184/(2×96500) = 0.2224 V. E = E° - (0.0591/2) log([H+]2[Cl-]2/PH2) = 0.2224 - 0.02955 × log(10-4) = 0.2224 + 0.1182 = 0.340 volt.
Teacher's Note: Convert ΔG° to E°, then apply Nernst with n = 2.
Exam Note: Convert kcal to J first.
Problem 96. For the reaction Fe3+ + 3e- ⇌ Fe, E° is -0.036 volt and the standard electrode potential for Fe3+ + e- ⇌ Fe2+ is 0.771 volt. Calculate the E° for Fe2+ + 2e- ⇌ Fe.
Solution. Free energies: 3(-0.036) = 1(0.771) + 2E°, so 2E° = -0.108 - 0.771 = -0.879 and E° = -0.4395 volt.
Teacher's Note: Subtract the Fe³⁺/Fe²⁺ step from the Fe³⁺/Fe step using nE°.
Exam Note: Weight each E° by its n.
Problem 97. The standard reduction potential at 25°C of the reaction 2H2O + 2e- → H2 + 2OH- is -0.8277 volt. Calculate the equilibrium constant for the reaction 2H2O ⇌ H3O+ + OH- at 25°C.
Solution. Cathode: H2O + e- → ½H2 + OH-, E° = -0.8277 V; anode: ½H2 + H2O → H3O+ + e-, E° = 0. E°cell = -0.8277 V, n = 1. log K = -0.8277/0.0591 = -14.0, so K ≈ 10-14.
Teacher's Note: Combine the two half-reactions to obtain water autoionisation; E° gives Kw.
Exam Note: Answer is K_w = 10⁻¹⁴ at 25°C.
Problem 98. Calculate the emf of the following cell: Pt(H2, 1 atm) | CH3CH2COOH (0.15 M) || NH4OH (0.01 M) | H2 (1 atm) Pt. Ka for CH3CH2COOH = 1.4×10-5; Kb for NH4OH = 1.8×10-5.
Solution. [H+] in the acid = √(0.15×1.4×10-5) = 1.449×10-3 M. [OH-] in NH4OH = √(0.01×1.8×10-5) = 4.242×10-4 M, so [H+] = 10-14/4.242×10-4 = 2.357×10-11 M. Ecell = 0.0591 log([H+]RHS/[H+]LHS) = 0.0591 log(2.357×10-11/1.449×10-3) = -0.4603 volt (book prints -0.4603).
Teacher's Note: Weak acid/base: [H⁺] = √(CK) for acid, K_w/√(CK_b) for base; then hydrogen concentration cell.
Exam Note: Compute each [H⁺] before the ratio.
Problem 99. Calculate equilibrium constant for I2 + I- ⇌ I3- at 298 K from the following: I2(aq) + 2e- → 2I-, E° = 0.6197 volt; I3- + 2e- → 3I-, E° = 0.5355 volt.
Solution. I2 + 2e- → 2I- (0.6197); 3I- → I3- + 2e- (-0.5355). Sum: I2 + I- ⇌ I3-, E° = 0.0842 V, n = 2. log K = 2×0.0842/0.0591 = 2.849, K = antilog = 706.9.
Teacher's Note: Reverse the triiodide reduction, add, and use log K = nE°/0.0591.
Exam Note: Keep n = 2 for the two-electron steps.
Problem 100. A lead storage battery has initially 200 g of lead and 200 g of PbO2, plus excess H2SO4. How long could this cell deliver a current of 10 amp, without recharging, if it was possible to operate it so that the reaction goes to completion?
Solution. Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O, 2 faraday per mole. Moles: Pb 200/207 = 0.966; PbO2 200/239 = 0.837 (limiting). Charge = 0.837×2×96500 = 1.615×105 C. t = Q/i = 1.615×105/10 = 1.615×104 s = 4.48 hour.
Teacher's Note: Identify the limiting electrode material before applying Q = it; each mole transfers 2 faraday.
Exam Note: PbO₂ is limiting, not Pb.
Problem 101. Zn(s) + 2AgCl(s) ⇌ ZnCl2 (0.555 M) + 2Ag(s); E°0°C = 1.015 volt, (dE/dT)P = -4.02×10-4 volt per degree. Find ΔG, ΔS.
Solution. ΔG = -nFE = -2×96500×1.015 = -195895 J = -195.895 kJ. ΔH = nF[T(dE/dT) - E] = 2×96500[273×(-4.02×10-4) - 1.015] = -217.075 kJ. ΔG = ΔH - TΔS gives -195.895 = -217.075 - 273ΔS, so ΔS = -0.0776 kJ K-1. ΔG = -195.895 kJ, ΔS = -18.55 cal K-1.
Teacher's Note: ΔS = nF(dE/dT); the temperature coefficient gives entropy directly.
Exam Note: Convert J to cal: divide by 4.184.
Problem 102. Calculate the equilibrium constant for the reaction 2Fe3+ + 3I- ⇌ 2Fe2+ + I3-. The standard reduction potentials in acidic conditions are 0.77 and 0.54 V respectively for Fe3+/Fe2+ and I3-/I- couples. (IIT 1998)
Solution. E°cell = 0.77 - 0.54 = 0.23 V, n = 2. log K = 2×0.23/0.0591 = 7.78 (7.80 with 0.059), so K ≈ 6.26×107 (printed value; 6.1×107 with 0.0591).
Teacher's Note: n = 2 because two Fe³⁺ each gain one electron; use log K = nE°/0.0591.
Exam Note: Quote K ≈ 10⁷ with n = 2.
Problem 103. Electrolysis of a solution of MnSO4 in aqueous sulphuric acid is a method for the preparation of MnO2 as per the reaction Mn2+(aq) + 2H2O → MnO2 + 2H+(aq) + H2. Passing a current of 27 A for 24 hours gives one kg of MnO2. What is the value of current efficiency? Write the reactions taking place at the cathode and at the anode. (IIT May 1997)
Solution. Theoretical w = E i t/96500 with E = 87/2: 1000 = (87×i×24×60×60)/(2×96500), so i = 25.6 A (needed for 1 kg). Current efficiency = 25.6/27.0 × 100 = 94.8%. Anode: Mn2+ + 2H2O → MnO2 + 4H+ + 2e- (the book writes Mn2+ → Mn4+ + 2e-); cathode: 2H+ + 2e- → H2.
Teacher's Note: Current efficiency = current actually needed ÷ current supplied; Mn(II)→Mn(IV) is a 2e⁻ change.
Exam Note: Efficiency = useful current/total current ×100.
Problem 104. Calculate the number of kWh of electricity necessary to produce 1 metric ton (1000 kg) of aluminium by Hall process in a cell operating at 15 V.
Solution. 1000 kg Al = 106/27 = 3.7×104 mol; each mole needs 3 F: charge = 3.7×104×3×96500 = 1.07×1010 C. Energy = QV = 1.07×1010×15 = 1.61×1011 J = 1.61×1011/3.6×106 kWh = 4.47×104 kWh.
Teacher's Note: Energy = charge × voltage; Al³⁺ needs 3 faraday per mole; 1 kWh = 3.6×10⁶ J.
Exam Note: Convert joules to kWh.
Problem 105. What will be the value of Λ for 0.001 M aqueous NH3 solution? Kb = 1.6×10-5 and Λ0 = 2.38×10-2 ohm-1 m2 mol-1
Solution. Kb = Cα²: 1.6×10-5 = 0.001α², so α = 0.126. α = Λmc/Λm∞: Λmc = 0.126×2.38×10-2 = 2.998×10-3 ohm-1 m2 mol-1 (= 29.98 ohm-1 cm2 mol-1). Corrected: the book prints the unit as ohm-1 cm2 mol-1; with Λ0 given in m2, the unit is m2.
Teacher's Note: Get α from K_b = Cα², then Λ = αΛ°; keep units consistent with Λ°.
Exam Note: Check units of Λ° before answering.
Problem 106. A weak monobasic acid is 5% dissociated in 0.01 mol dm-3 solution. The limiting molar conductivity at infinite dilution is 4.00×10-2 ohm-1 m2 mol-1. Calculate the conductivity of a 0.05 mol dm-3 solution of the acid.
Solution. Ka = Cα² = 0.01×(0.05)² = 2.5×10-5. For 0.05 M: 2.5×10-5 = 0.05α², α = 0.0223. Λmc = αΛm∞ = 0.0223×4×10-2 = 8.92×10-4 ohm-1 m2 mol-1. Corrected: the book prints cm2; the unit follows Λ∞ in m2. (The question asks conductivity κ = ΛC = 8.92×10-4×50 mol m-3 = 4.46×10-2 ohm-1 m-1; the book gives only Λ.)
Teacher's Note: First find K_a at 0.01 M, then α at 0.05 M, then Λ = αΛ°.
Exam Note: Report Λ with m² units; note κ = ΛC.
Problem 107. 1.05 g of a lead ore containing impurity of Ag was dissolved in HNO3 and the volume was made 350 mL. A Ag electrode was dipped in the solution and Ecell of Pt(H2) | H+ (1 M) || Ag+ | Ag was 0.503 V at 298 K. Calculate % of lead in the ore (the printed answer is the % of Ag). (E°Ag+/Ag = 0.80 V)
Solution. ½H2 + Ag+(x) → Ag + H+(1 M), n = 1. E = 0.80 - 0.0591 log(1/x) = 0.503, so log(1/x) = 5.025 and x = 9.43×10-6 M. Moles of Ag+ in 350 mL = 9.43×10-6×350/1000 = 3.3×10-6; mass of Ag = 3.3×10-6×108 = 3.56×10-4 g. % Ag = 3.56×10-4/1.05×100 = 0.0339%. (The printed answer is labelled as the % of Ag in the ore; the question text asks for lead.)
Teacher's Note: Nernst gives [Ag⁺]; convert to mass in 350 mL, then divide by ore mass.
Exam Note: Answer as % Ag, as the book does.
Problem 108. Calculate E° of the following half-cell reaction at 298 K: Ag(NH3)2+ + e- → Ag + 2NH3. Ag+ + e- → Ag, E° = 0.80 V; Ag(NH3)2+ ⇌ Ag+ + 2NH3, K = 6×10-8.
Solution. Let E° = v. Anode: Ag → Ag+ + e-; cathode: [Ag(NH3)2]+ + e- → Ag + 2NH3. Net: Ag + [Ag(NH3)2]+ ⇌ Ag+ + 2NH3, Q = K = 6×10-8 at equilibrium (E = 0): 0 = (v - 0.80) - 0.0591 log(6×10-8), so v = 0.80 + 0.0591×(-7.22) = 0.373 volt.
Teacher's Note: The complex stability constant lowers E°: E° = E°(Ag⁺/Ag) + 0.0591 log K_inst.
Exam Note: Dissociation K of complex shifts potential.
Objective Questions - Set-1: Questions with single correct answer
Set-1 Question 1. An electrolyte is a substance which:
(a) conducts electricity
(b) decomposes on heating
(c) is acidic in nature
(d) when dissolved in water, dissociates into ions
Solution. Answer (from key): (d) when dissolved in water, dissociates into ions. An electrolyte yields free ions in solution or in the melt.
Teacher's Note: Conduction in solution comes from ions released on dissolution.
Exam Note: Define electrolyte by ion formation.
Set-1 Question 2. The theory of ionisation was presented by:
(a) Faraday
(b) Arrhenius
(c) Ostwald
(d) Rutherford
Solution. Answer (from key): (b) Arrhenius. Arrhenius proposed electrolytic dissociation in 1884.
Teacher's Note: Ionisation theory belongs to Arrhenius; Ostwald only extended it to weak electrolytes.
Exam Note: Name Arrhenius, not Ostwald.
Set-1 Question 3. Dissociation of an electrolyte into negative and positive ions is called:
(a) ionisation
(b) electrolysis
(c) decomposition
(d) hydrolysis
Solution. Answer (from key): (a) ionisation. Splitting into ions in solution is ionisation.
Teacher's Note: Ionisation needs no current, unlike electrolysis.
Exam Note: Do not confuse with electrolysis.
Set-1 Question 4. Degree of ionisation is equal to:
(a) total number of moles of the electrolyte present in solution
(b) total number of moles of the electrolyte dissociated into ions
(c) number of moles dissociated/total number of moles dissolved
(d) total number of moles dissolved/number of moles dissociated
Solution. Answer (from key): (c) number of moles dissociated/total number of moles dissolved. α = moles dissociated ÷ total moles dissolved.
Teacher's Note: α lies between 0 and 1; the inverted ratio would exceed 1.
Exam Note: Write α as dissociated over total.
Set-1 Question 5. Conductivity of aqueous solution of an electrolyte depends on:
(a) molecular mass of the electrolyte
(b) boiling point of solvent
(c) degree of ionisation
(d) volume of the solvent
Solution. Answer (from key): (c) degree of ionisation. Conductivity depends on the number of ions, set by the degree of ionisation.
Teacher's Note: Ion number, not molecular mass, controls conductance.
Exam Note: Link conductivity to ion concentration.
Set-1 Question 6. Degree of ionisation does not depend on:
(a) nature of the solvent
(b) nature of the electrolyte
(c) dilution
(d) molecular mass of the electrolyte
Solution. Answer (from key): (d) molecular mass of the electrolyte. α depends on solvent, electrolyte, dilution and temperature, not on molar mass.
Teacher's Note: Eliminate factors that change ion formation.
Exam Note: α is independent of molar mass.
Set-1 Question 7. Substances which give good conducting aqueous solutions are called:
(a) weak electrolytes
(b) strong electrolytes
(c) non-electrolytes
(d) catalysts
Solution. Answer (from key): (b) strong electrolytes. Strong electrolytes ionise almost completely, so they conduct well.
Teacher's Note: Good conductors in water are strong electrolytes.
Exam Note: Strong means nearly complete ionisation.
Set-1 Question 8. The number of ions given by one molecule of K4Fe(CN)6 after complete dissociation is:
(a) 5
(b) 11
(c) 2
(d) 10
Solution. Answer (from key): (a) 5. K4Fe(CN)6 → 4K+ + [Fe(CN)6]4-, giving 5 ions.
Teacher's Note: The complex ion stays intact: count 4 K⁺ plus one complex ion.
Exam Note: Do not split the complex ion.
Set-1 Question 9. The amount of electricity required to produce one mole of copper from copper sulphate solution will be:
(a) 1 faraday
(b) 2.33 faraday
(c) 2 faraday
(d) 1.33 faraday
Solution. Answer (from key): (c) 2 faraday. Cu2+ + 2e- → Cu(s): one mole of copper needs 2 mole of electrons, i.e. 2 faraday.
Teacher's Note: Moles of electrons per mole of metal equal the ion charge.
Exam Note: Cu²⁺ needs 2 F per mole.
Set-1 Question 10. The process in which chemical change occurs on passing electricity is termed:
(a) ionisation
(b) neutralisation
(c) electrolysis
(d) hydrolysis
Solution. Answer (from key): (c) electrolysis. Chemical change caused by an electric current is electrolysis.
Teacher's Note: Electrolysis is current-driven chemical change.
Exam Note: Separate it from ionisation.
Set-1 Question 11. Which of the following condition is correct for operation of electrolytic cell?
(a) ΔG = 0, E = 0
(b) ΔG < 0, E > 0
(c) ΔG > 0, E < 0
(d) ΔG > 0, E > 0
Solution. Answer (from key): (c) ΔG > 0, E < 0. An electrolytic cell is non-spontaneous: ΔG > 0 and Ecell < 0.
Teacher's Note: Non-spontaneous operation needs external energy, so ΔG positive and E negative.
Exam Note: ΔG = −nFE fixes the signs.
Set-1 Question 12. Which one is the correct equation that represents the first law of electrolysis?
(a) mZ = ct
(b) m = cZt
(c) mc = Zt
(d) c = mZt
Solution. Answer (from key): (b) m = cZt. First law: m = Zit, where c denotes the current.
Teacher's Note: Mass equals Z × current × time.
Exam Note: Mass is proportional to charge.
Set-1 Question 13. When one coulomb of electricity is passed through an electrolytic solution, the mass deposited on the electrode is equal to:
(a) equivalent weight
(b) molecular weight
(c) electrochemical equivalent
(d) one gram
Solution. Answer (from key): (c) electrochemical equivalent. Mass deposited by one coulomb is the electrochemical equivalent Z.
Teacher's Note: Z is mass per coulomb; equivalent weight is per faraday.
Exam Note: Z = mass per coulomb.
Set-1 Question 14. One faraday is equal to:
(a) 9650 coulomb
(b) 10,000 coulomb
(c) 19640 coulomb
(d) 96500 coulomb
Solution. Answer (from key): (d) 96500 coulomb. 1 F = 96500 C, the charge of one mole of electrons.
Teacher's Note: F ≈ 96500 C mol⁻¹.
Exam Note: Remember 96500 C.
Set-1 Question 15. When one faraday of electric current is passed, the mass deposited is equal to:
(a) one gram equivalent
(b) one gram mole
(c) electrochemical equivalent
(d) half gram equivalent
Solution. Answer (from key): (a) one gram equivalent. One faraday deposits one gram equivalent of any substance.
Teacher's Note: Faraday's second law counts mass in gram equivalents.
Exam Note: One F gives one gram equivalent.
Set-1 Question 16. On passing one faraday of electricity through a dilute solution of an acid, the volume of hydrogen obtained at NTP is:
(a) 22400 mL
(b) 1120 mL
(c) 2240 mL
(d) 11200 mL
Solution. Answer (from key): (d) 11200 mL. 2H+ + 2e- → H2: one faraday gives ½ mol H2 = 11200 mL at NTP.
Teacher's Note: Half a mole of H₂ forms per faraday.
Exam Note: Use 11200 mL per faraday.
Set-1 Question 17. w g of copper is deposited in a copper voltameter when an electric current of 2 ampere is passed for 2 hours. If one ampere of electric current is passed for 4 hours in the same voltameter, copper deposited will be:
(a) w
(b) w/2
(c) w/4
(d) 2w
Solution. Answer (from key): (a) w. Charge = it: 2×2 = 4 A h and 1×4 = 4 A h are equal, so the mass is w.
Teacher's Note: Mass depends only on the charge it.
Exam Note: Compare the products of current and time.
Set-1 Question 18. Copper sulphate solution is electrolysed between two platinum electrodes. A current is passed until 1.6 g of oxygen is liberated at anode. The amount of copper deposited at the cathode during the same period is:
(a) 6.36 g
(b) 63.6 g
(c) 12.7 g
(d) 3.2 g
Solution. Answer (from key): (a) 6.36 g. 1.6 g O2 = 0.2 equivalent; Cu deposited = 0.2×31.8 = 6.36 g.
Teacher's Note: Equal equivalents are liberated at both electrodes.
Exam Note: Equivalent mass of Cu = 31.8.
Set-1 Question 19. When electricity is passed through a solution of AlCl3, 13.5 g of Al is discharged. The amount of charge passed is:
(a) 1.5 F
(b) 0.5 F
(c) 1.0 F
(d) 2.0 F
Solution. Answer (from key): (a) 1.5 F. 13.5 g Al = 13.5/9 = 1.5 equivalent, so 1.5 F.
Teacher's Note: Equivalent mass of Al = 27/3 = 9.
Exam Note: Q = equivalents × F.
Set-1 Question 20. When the same electric current is passed through the solution of different electrolytes in series, the amounts of elements deposited on the electrodes are in the ratio of their:
(a) atomic numbers
(b) atomic masses
(c) specific gravities
(d) equivalent masses
Solution. Answer (from key): (d) equivalent masses. Faraday's second law: masses deposited are proportional to equivalent masses.
Teacher's Note: Series cells carry equal charge, so deposits scale with equivalent weight.
Exam Note: Second law statement.
Set-1 Question 21. Faraday's laws of electrolysis are related to:
(a) atomic number of the cation
(b) atomic number of the anion
(c) equivalent mass of the electrolyte
(d) speed of the cation
Solution. Answer (from key): (c) equivalent mass of the electrolyte. Faraday's laws relate mass liberated to equivalent mass and charge.
Teacher's Note: Equivalent mass links mass and charge.
Exam Note: Link the laws to equivalent mass.
Set-1 Question 22. The specific conductance of a 0.01 M solution of KCl is 0.0014 ohm-1 cm-1 at 25°C. Its equivalent conductance is:
(a) 14
(b) 140
(c) 1.4
(d) 0.14
Solution. Answer (from key): (b) 140. Λ = κ×1000/N = 0.0014×1000/0.01 = 140 ohm-1 cm2 eq-1.
Teacher's Note: For KCl molarity equals normality; Λ = 1000κ/C.
Exam Note: Multiply κ by 1000/C.
Set-1 Question 23. The equivalent conductivity of 0.1 N CH3COOH at 25°C is 80 and at infinite dilution 400 ohm-1. The degree of dissociation of CH3COOH is:
(a) 1
(b) 0.2
(c) 0.1
(d) 0.5
Solution. Answer (from key): (b) 0.2. α = Λ/Λ∞ = 80/400 = 0.2.
Teacher's Note: The ratio of measured to limiting conductance gives α.
Exam Note: α = Λc/Λ∞.
Set-1 Question 24. The number of electrons involved when one faraday of electricity is passed through an electrolytic solution is:
(a) 96500
(b) 8×106
(c) 12×1016
(d) 6×1023
Solution. Answer (from key): (d) 6×1023. One faraday is the charge of one mole of electrons, 6.022×1023 electrons.
Teacher's Note: F = NAe.
Exam Note: One faraday = Avogadro number of electrons.
Set-1 Question 25. One faraday of charge was passed through the electrolytic cells placed in series containing solutions of Ag+, Ni2+ and Cr3+ respectively. The amount of Ag (At. mass 108), Ni (At. mass 59) and Cr (At. mass 52) deposited will be (Ag, Ni, Cr):
(a) 108 g, 29.5 g, 17.5 g
(b) 108 g, 59.0 g, 52.0 g
(c) 108 g, 108.0 g, 108.0 g
(d) 108 g, 117.5 g, 166.0 g
Solution. Answer (from key): (a) 108 g, 29.5 g, 17.5 g. One faraday deposits one gram equivalent: Ag 108/1 = 108 g, Ni 59/2 = 29.5 g, Cr 52/3 = 17.3 g (option (a) prints 17.5 g, the nearest).
Teacher's Note: Divide atomic mass by ion charge for each metal.
Exam Note: Equivalent mass = A/charge.
Set-1 Question 26. One faraday of electricity will liberate one gram mole of the metal from the solution of:
(a) BaCl2
(b) CuSO4
(c) AlCl3
(d) NaCl
Solution. Answer (from key): (d) NaCl. One gram mole per faraday requires a monovalent ion, Na+.
Teacher's Note: Only 1+ ions give one mole per faraday.
Exam Note: Charge 1+ gives 1 mol per F.
Set-1 Question 27. Strong electrolytes are those which:
(a) dissolve readily in water
(b) conduct electricity
(c) dissociate into ions even at high concentration
(d) dissociate into ions at high dilution
Solution. Answer (from key): (c) dissociate into ions even at high concentration. Strong electrolytes are fully ionised even at high concentration.
Teacher's Note: Complete dissociation at all concentrations defines a strong electrolyte.
Exam Note: Contrast with weak electrolytes.
Set-1 Question 28. The extent of ionisation increases:
(a) with increase in concentration of the electrolyte
(b) on decreasing temperature of solution
(c) on addition of excess of water
(d) on stirring the solution vigorously
Solution. Answer (from key): (c) on addition of excess of water. On dilution α increases (Ostwald's dilution law).
Teacher's Note: For weak electrolytes α ∝ 1/√C.
Exam Note: Dilution raises α.
Set-1 Question 29. Molten sodium chloride conducts electricity due to the presence of:
(a) free electrons
(b) free ions
(c) free molecules
(d) free atoms of Na and Cl
Solution. Answer (from key): (b) free ions. Molten NaCl contains mobile Na+ and Cl- ions.
Teacher's Note: Ionic compounds conduct when ions become mobile.
Exam Note: Ions, not electrons, carry the current.
Set-1 Question 30. When NaCl is dissolved in water, the sodium ion is:
(a) oxidised
(b) reduced
(c) hydrolysed
(d) hydrated
Solution. Answer (from key): (d) hydrated. Na+ becomes surrounded by water molecules, i.e. hydrated.
Teacher's Note: No redox or hydrolysis occurs; ion-dipole attraction hydrates the ion.
Exam Note: Ion-dipole hydration.
Set-1 Question 31. A solution of sodium sulphate in water is electrolysed using platinum electrodes. The products at cathode and anode are respectively:
(a) H2, O2
(b) O2, H2
(c) O2, Na
(d) O2, SO2
Solution. Answer (from key): (a) H2, O2. Water is electrolysed: H2 at the cathode and O2 at the anode.
Teacher's Note: Na⁺ and SO₄²⁻ are not discharged from water.
Exam Note: Cathode H₂, anode O₂.
Set-1 Question 32. The electric conduction of a salt solution in water depends on:
(a) shape of molecules
(b) size of ions
(c) size of solvent molecules
(d) extent of its ionisation
Solution. Answer (from key): (d) extent of its ionisation. Conduction depends on the ions available, i.e. the extent of ionisation.
Teacher's Note: More ions means higher conductance.
Exam Note: Tie conduction to ionisation.
Set-1 Question 33. In electroplating, the article to be electroplated serves as:
(a) cathode
(b) electrolyte
(c) anode
(d) conductor
Solution. Answer (from key): (a) cathode. The article is the cathode, where metal ions are reduced and deposited.
Teacher's Note: Metal deposits at the cathode.
Exam Note: The article is the cathode.
Set-1 Question 34. The amount of electricity that can deposit 108 g of silver from silver nitrate solution is: (AFMC 1993)
(a) 1 ampere
(b) 1 coulomb
(c) 1 faraday
(d) 2 ampere
Solution. Answer (from key): (c) 1 faraday. 108 g is one mole of Ag, which needs one faraday: Ag+ + e- → Ag.
Teacher's Note: Quantity of electricity is measured in faraday or coulomb, not ampere.
Exam Note: Ag⁺ needs 1 F per mole.
Set-1 Question 35. A certain current liberated 0.504 g of hydrogen in 2 hours. How many grams of copper can be liberated by the same current flowing for the same time in CuSO4 solution?
(a) 12.7 g
(b) 15.9 g
(c) 31.8 g
(d) 63.5 g
Solution. Answer (from key): (b) 15.9 g. 0.504 g H = 0.504 equivalent, so Cu = 0.504×31.75 = 16.0 g, nearest option 15.9 g.
Teacher's Note: The same charge liberates equal equivalents of each substance.
Exam Note: Equivalent mass of Cu = 31.75.
Set-1 Question 36. If the specific resistance of a solution of concentration C g equivalent litre-1 is R, then its equivalent conductance is:
(a) 100R/C
(b) RC/1000
(c) 1000/RC
(d) C/1000R
Solution. Answer (from key): (c) 1000/RC. Specific conductance = 1/R; Λ = κ×1000/C = 1000/(RC).
Teacher's Note: Λ = 1000κ/C with κ = 1/R.
Exam Note: Convert resistivity to conductivity first.
Set-1 Question 37. If the specific conductance and conductance of a solution are same, then its cell constant is equal to:
(a) 1
(b) 0
(c) 10
(d) 100
Solution. Answer (from key): (a) 1. G = κ/(cell constant), so cell constant = κ/G = 1.
Teacher's Note: κ = G × (l/a).
Exam Note: Cell constant = κ/G.
Set-1 Question 38. On increasing the dilution, the specific conductance: (Jiwaji 1990)
(a) increases
(b) decreases
(c) remains constant
(d) none of these
Solution. Answer (from key): (b) decreases. Specific conductance decreases on dilution because ions per unit volume fall.
Teacher's Note: Molar conductance rises while specific conductance falls.
Exam Note: κ falls, Λ rises on dilution.
Set-1 Question 39. The distance between two electrodes of a cell is 2.5 cm and area of each electrode is 5 cm2. The cell constant is: (Jabalpur 1990)
(a) 2
(b) 12.5
(c) 7.5
(d) 0.5
Solution. Answer (from key): (d) 0.5. Cell constant = l/a = 2.5/5 = 0.5 cm-1.
Teacher's Note: Cell constant is distance over area.
Exam Note: Use l/a, not l×a.
Set-1 Question 40. At 25°C, the molar conductances at infinite dilution for the strong electrolytes NaOH, NaCl and BaCl2 are 248×10-4, 126×10-4 and 280×10-4 S m2 mol-1 respectively. Λ°m Ba(OH)2 in S m2 mol-1: (EAMCET 2009)
(a) 52.4×10-4
(b) 524×10-4
(c) 402×10-4
(d) 262×10-4
Solution. Answer (from key): (b) 524×10-4. Λ°(Ba(OH)2) = Λ°(BaCl2) + 2Λ°(NaOH) − 2Λ°(NaCl) = 280×10-4 + 2×248×10-4 − 2×126×10-4 = 524×10-4 S m2 mol-1.
Teacher's Note: Kohlrausch's law: combine strong electrolytes to build the target salt.
Exam Note: Add and subtract with coefficients.
Set-1 Question 41. The electrochemical cell stops working after some time because: (VITEEE 2008)
(a) electrode potential of both the electrodes becomes zero
(b) electrode potential of both the electrodes becomes equal
(c) one of the electrodes is eaten away
(d) the cell reaction gets reversed
Solution. Answer (from key): (b) electrode potential of both the electrodes becomes equal. The cell stops when the two electrode potentials become equal, Ecell = 0.
Teacher's Note: Ecell = 0 at equilibrium; individual potentials are not zero.
Exam Note: Equal potentials, not zero potentials.
Set-1 Question 42. Which reaction will take place at cathode when fused calcium chloride is electrolysed?
(a) Ca2+ + 2e- → Ca
(b) Cl- → Cl + e-
(c) Ca2+ − 2e- → Ca
(d) Cl- − e- → Cl
Solution. Answer (from key): (a) Ca2+ + 2e- → Ca. Cations are reduced at the cathode: Ca2+ + 2e- → Ca.
Teacher's Note: Reduction occurs at the cathode and adds electrons.
Exam Note: Cathode reaction gains electrons.
Set-1 Question 43. In electrolysis oxidation takes place at:
(a) both the electrodes
(b) cathode
(c) anode
(d) in the solution
Solution. Answer (from key): (c) anode. Oxidation always occurs at the anode.
Teacher's Note: Anode: oxidation (AN OX).
Exam Note: Anode is oxidation.
Set-1 Question 44. The equation representing the process by which standard reduction potential of zinc can be defined is:
(a) Zn2+(s) + 2e- → Zn
(b) Zn(g) → Zn2+(g) + 2e-
(c) Zn2+(g) + 2e- → Zn
(d) Zn2+(aq) + 2e- → Zn(s)
Solution. Answer (from key): (d) Zn2+(aq) + 2e- → Zn(s). Standard reduction potential refers to aqueous Zn2+ reduced to solid Zn: Zn2+(aq) + 2e- → Zn(s).
Teacher's Note: State symbols matter: aqueous ion to solid metal.
Exam Note: Use (aq) and (s) states.
Set-1 Question 45. The measured potential for Mg2+ + 2e- ⇌ Mg(s) does not depend upon:
(a) raising the temperature
(b) increasing the concentration of Mg2+ ions
(c) making the magnesium plate bigger
(d) purity of magnesium plate
Solution. Answer (from key): (c) making the magnesium plate bigger. Electrode potential is intensive, so the size of the plate does not change it.
Teacher's Note: Nernst terms involve temperature and concentration only.
Exam Note: Electrode size is irrelevant.
Set-1 Question 46. All cells do not contain:
(a) an anode
(b) a cathode
(c) ions
(d) a porous partition
Solution. Answer (from key): (d) a porous partition. Not every cell needs a porous partition (single-compartment cells have none).
Teacher's Note: Anode, cathode and ions are universal; the partition is optional.
Exam Note: Partition or salt bridge is optional.
Set-1 Question 47. When lead accumulator is charged, it is:
(a) an electrolytic cell
(b) a galvanic cell
(c) a Daniell cell
(d) none of these
Solution. Corrected: Answer (a) an electrolytic cell. (key prints (d)) On charging, an external source drives the reaction, so it is an electrolytic cell. Corrected: the printed key gives (d), but the correct option is (a).
Teacher's Note: Charging forces a non-spontaneous reaction, so the cell is electrolytic.
Exam Note: Charging is electrolytic; discharging is galvanic.
Set-1 Question 48. The standard electrode potentials for the reactions Ag+(aq) + e- → Ag(s) and Sn2+(aq) + 2e- → Sn(s) at 25°C are 0.80 volt and −0.14 volt respectively. The emf of the cell Sn | Sn2+(1 M) || Ag+(1 M) | Ag is:
(a) 0.66 volt
(b) 0.80 volt
(c) 1.08 volt
(d) 0.94 volt
Solution. Answer (from key): (d) 0.94 volt. E°cell = 0.80 − (−0.14) = 0.94 V.
Teacher's Note: E°cell = E°cathode − E°anode.
Exam Note: Subtract anode from cathode.
Set-1 Question 49. The cathodic reaction in electrolysis of dilute H2SO4 with platinum electrode is:
(a) oxidation
(b) reduction
(c) both oxidation and reduction
(d) neutralisation
Solution. Corrected: Answer (b) reduction. (key prints (d)) The cathode is always the site of reduction: 2H+ + 2e- → H2. Corrected: the printed key gives (d), but the correct option is (b) reduction.
Teacher's Note: Cathode reaction is reduction, not neutralisation.
Exam Note: Cathode means reduction.
Set-1 Question 50. Strongest reducing agent is:
(a) K
(b) Mg
(c) Al
(d) I
Solution. Answer (from key): (a) K. K has the most negative standard reduction potential (−2.93 V), so it is the strongest reducing agent.
Teacher's Note: Lower reduction potential means stronger reductant.
Exam Note: Compare E° values.
Set-1 Question 51. The metal oxide which decomposes on heating, is:
(a) ZnO
(b) HgO
(c) Al2O3
(d) CuO
Solution. Answer (from key): (b) HgO. HgO decomposes on heating: 2HgO → 2Hg + O2.
Teacher's Note: Oxides of unreactive metals decompose by heat alone.
Exam Note: Hg is a noble-type metal.
Set-1 Question 52. The reaction ½H2(g) + AgCl(s) = H+(aq) + Cl-(aq) + Ag(s) occurs in the galvanic cell: (AFMC 2009)
(a) Ag | AgCl(s) | KCl(soln.) || AgNO3(soln.) | Ag
(b) Pt | H2(g) | HCl(soln.) || AgNO3(soln.) | Ag
(c) Pt | H2(g) | HCl(soln.) || AgCl(s) | Ag
(d) Pt | H2(g) | KCl(soln.) || AgCl(s) | Ag
Solution. Answer (from key): (c) Pt | H2(g) | HCl(soln.) || AgCl(s) | Ag. H2 is oxidised to H+ at the anode and AgCl is reduced to Ag releasing Cl- at the cathode, so the cell is Pt | H2 | HCl || AgCl | Ag.
Teacher's Note: Identify anode (H₂) and cathode (AgCl | Ag) from the equation.
Exam Note: Write anode left, cathode right.
Set-1 Question 53. The standard oxidation potentials E° for the half reactions are Zn → Zn2+ + 2e-, E° = +0.76 volt; Fe → Fe2+ + 2e-, E° = +0.41 volt. The emf of the cell Fe2+ + Zn → Zn2+ + Fe is: (CET Karnataka 2009)
(a) +0.35 volt
(b) −0.35 volt
(c) +1.17 volt
(d) −1.17 volt
Solution. Answer (from key): (a) +0.35 volt. Zn is oxidised (+0.76 V) and Fe2+ reduced (−0.41 V): E°cell = 0.76 − 0.41 = +0.35 V.
Teacher's Note: Add oxidation potential of anode and reduction potential of cathode.
Exam Note: Reverse the sign for Fe reduction.
Set-1 Question 54. The standard reduction potentials at 25°C for the following half reactions are: Zn2+(aq) + 2e- ⇌ Zn(s), −0.762; Cr3+(aq) + 3e- ⇌ Cr(s), −0.740; 2H+ + 2e- ⇌ H2(g), 0.00; Fe3+ + e- ⇌ Fe2+, 0.77. Which is the strongest reducing agent? (VITEEE 2007)
(a) Zn
(b) Cr
(c) H2(g)
(d) Fe2+(aq)
Solution. Answer (from key): (a) Zn. The most negative reduction potential (Zn, −0.762 V) belongs to the strongest reducing agent.
Teacher's Note: The strongest reductant has the lowest E°red.
Exam Note: Rank by reduction potential.
Set-1 Question 55. Hydrogen gas will not reduce heated:
(a) cupric oxide
(b) ferric oxide
(c) stannic oxide
(d) aluminium oxide
Solution. Answer (from key): (d) aluminium oxide. Al lies far above hydrogen in the activity series, so H2 cannot reduce Al2O3.
Teacher's Note: Hydrogen reduces oxides of less reactive metals only.
Exam Note: Al₂O₃ is too stable.
Set-1 Question 56. A solution containing one mole per litre of each Cu(NO3)2, AgNO3, Hg2(NO3)2 and Mg(NO3)2 is being electrolysed by using inert electrodes. The values of standard electrode potentials (reduction potentials) are Ag/Ag+ = 0.80 volt, 2Hg/Hg22+ = 0.79 volt, Cu/Cu2+ = +0.24 volt, Mg/Mg2+ = −2.37 volt. With increasing voltage, the deposition of metals on the cathode will be: (PMT Kerala 2004)
(a) Ag, Hg, Cu
(b) Cu, Hg, Ag
(c) Ag, Hg, Cu, Mg
(d) Mg, Cu, Hg, Ag
Solution. Answer (from key): (a) Ag, Hg, Cu. Metals with higher reduction potential deposit first: Ag (0.80) > Hg (0.79) > Cu (0.24); Mg (−2.37) does not deposit from aqueous solution.
Teacher's Note: The highest E°red is discharged first at the cathode.
Exam Note: Mg²⁺ never deposits in water.
Set-1 Question 57. Four colourless salt solutions are placed in separate test tubes and a strip of copper is dipped in each. Which solution finally turns blue?
(a) Pb(NO3)2
(b) AgNO3
(c) Zn(NO3)2
(d) Cd(NO3)2
Solution. Answer (from key): (b) AgNO3. Cu displaces Ag from AgNO3, forming blue Cu2+: Cu + 2Ag+ → Cu2+ + 2Ag.
Teacher's Note: Copper reduces only ions with higher E° than Cu²⁺/Cu.
Exam Note: Displacement needs higher E°.
Set-1 Question 58. Red hot carbon will remove oxygen from the oxide XO and YO but not from ZO. Y will remove oxygen from XO. Use this evidence to deduce the order of activity of the three metals X, Y and Z putting the most active first:
(a) XYZ
(b) ZYX
(c) YXZ
(d) ZXY
Solution. Answer (from key): (b) ZYX. Z is most active (its oxide resists carbon); Y removes oxygen from XO so Y is more active than X. Order: Z, Y, X.
Teacher's Note: Combine the two clues: Z beats carbon, Y beats X.
Exam Note: Chain the two comparisons.
Set-1 Question 59. Which of the following metals does not give the following reaction? M + Water → Oxide or hydroxide + H2
(a) Iron
(b) Sodium
(c) Mercury
(d) Magnesium
Solution. Answer (from key): (c) Mercury. Mercury lies below hydrogen in the activity series and does not react with water.
Teacher's Note: Fe (steam), Na and Mg all react.
Exam Note: Hg is unreactive with water.
Set-1 Question 60. Which is the best reducing agent?
(a) F-
(b) Cl-
(c) Br-
(d) I-
Solution. Answer (from key): (d) I-. I- is oxidised most easily (lowest E° for X2/X-), so it is the best reducing agent.
Teacher's Note: Larger, less electronegative halide ions lose electrons more easily.
Exam Note: Reducing power rises down the group.
Set-1 Question 61. If a spoon of copper metal is placed in a solution of ferrous sulphate:
(a) Cu will precipitate out
(b) iron will precipitate
(c) Cu and Fe will precipitate
(d) no reaction will take place
Solution. Answer (from key): (d) no reaction will take place. Cu (E° = +0.34 V) cannot reduce Fe2+ (E° = −0.44 V), so no reaction occurs.
Teacher's Note: A metal displaces only ions of metals lower in the series.
Exam Note: Cu lies below Fe in reactivity.
Set-1 Question 62. Among Na, Hg, S, Pt and graphite, which can be used as electrodes in electrolytic cells having aqueous solutions?
(a) Hg and Pt
(b) Hg, Pt and graphite
(c) Na and S
(d) Na, Hg and S
Solution. Answer (from key): (b) Hg, Pt and graphite. Hg, Pt and graphite are inert and conduct; Na reacts with water and S is a non-conductor.
Teacher's Note: Electrodes must conduct and not react with water.
Exam Note: Exclude Na (reactive) and S (insulator).
Set-1 Question 63. The most reactive metal among the following is:
(a) Al
(b) Ni
(c) Pb
(d) Cu
Solution. Answer (from key): (a) Al. Al has the most negative reduction potential, so it is the most reactive.
Teacher's Note: Order of reactivity follows the electrochemical series.
Exam Note: Al is highest in this list.
Set-1 Question 64. Which of the following metals is most readily corroded in moist air?
(a) Copper
(b) Iron
(c) Silver
(d) Nickel
Solution. Answer (from key): (b) Iron. Iron has a lower reduction potential than Cu, Ag and Ni and rusts readily in moist air.
Teacher's Note: Rusting needs moisture and oxygen.
Exam Note: Iron is the common rusting metal.
Set-1 Question 65. Which one will liberate Br2 from KBr?
(a) HI
(b) I2
(c) Cl2
(d) SO2
Solution. Answer (from key): (c) Cl2. Cl2 (E° = 1.36 V) oxidises Br- to Br2 (E° = 1.09 V): Cl2 + 2Br- → 2Cl- + Br2.
Teacher's Note: Only a stronger oxidising agent displaces bromine.
Exam Note: Cl₂ is a stronger oxidant than Br₂.
Set-1 Question 66. Which one of the following is not the correct representation?
(a) E°cell = Red. pot. of cathode + Oxid. pot. of anode
(b) E°cell = Red. pot. of cathode − Oxid. pot. of anode
(c) E°cell = Red. pot. of cathode − Red. pot. of anode
(d) E°cell = Oxid. pot. of cathode + Oxid. pot. of anode
Solution. Answer (from key): (b) E°cell = Red. pot. of cathode − Oxid. pot. of anode. Correct forms: red(cathode) + oxid(anode), or red(cathode) − red(anode). Subtracting an oxidation potential is wrong.
Teacher's Note: Never subtract an oxidation potential from a reduction potential.
Exam Note: Match like potentials with the right sign.
Set-1 Question 67. Which of the following represents the potential of silver wire dipped into 0.1 M AgNO3 solution at 25°C?
(a) E°red.
(b) (E°red. + 0.059)
(c) (E°oxid. − 0.059)
(d) (E°red. − 0.059)
Solution. Answer (from key): (d) (E°red. − 0.059). E = E° + 0.059 log[Ag+] = E° + 0.059 log 0.1 = E°red − 0.059.
Teacher's Note: log 0.1 = −1, so the shift is −0.059 V.
Exam Note: Use E = E° + 0.059 log[Ag⁺].
Set-1 Question 68. If the solution of the CuSO4 in which copper rod is immersed is diluted to 10 times, the electrode potential:
(a) increases by 0.030 volt
(b) decreases by 0.030 volt
(c) increases by 0.059 volt
(d) decreases by 0.0059 volt
Solution. Answer (from key): (b) decreases by 0.030 volt. E = E° + (0.059/2) log[Cu2+]; tenfold dilution lowers log[Cu2+] by 1, so E falls by 0.0295 ≈ 0.030 V.
Teacher's Note: Nernst slope is 0.059/n with n = 2.
Exam Note: Divide 0.059 by 2.
Set-1 Question 69. A solution of Cu(II) sulphate is reacted with KCl and KI. In which case will the Cu2+ be reduced to Cu+?
(a) In both the cases
(b) When reacted with KCl
(c) When reacted with KI
(d) In both the cases but in presence of H+
Solution. Answer (from key): (c) When reacted with KI. I- reduces Cu2+: 2Cu2+ + 4I- → 2CuI + I2; Cl- does not.
Teacher's Note: Iodide is a reducing agent and CuI precipitates.
Exam Note: Only I⁻ reduces Cu²⁺.
Set-1 Question 70. From the electrochemical series, it can be concluded that:
(a) Zn2+ will liberate H2 from 1 M HCl
(b) Ag metal reacts spontaneously with Zn2+
(c) Zn metal will liberate H2 from 1 M HCl
(d) Ag metal will liberate H2 from 1 M HCl
Solution. Answer (from key): (c) Zn metal will liberate H2 from 1 M HCl. Zn lies above hydrogen in the series, so Zn + 2HCl → ZnCl2 + H2.
Teacher's Note: Metals above H displace hydrogen from acids.
Exam Note: Zn is above hydrogen; Ag is below.
Set-1 Question 71. The potential of a hydrogen electrode at pH = 1 is:
(a) 0.059 volt
(b) 0 volt
(c) −0.059 volt
(d) 0.59 volt
Solution. Answer (from key): (c) −0.059 volt. E = −0.059 pH = −0.059×1 = −0.059 V.
Teacher's Note: Hydrogen electrode: E = −0.059 pH at 25°C.
Exam Note: Standard H electrode has pH = 0.
Set-1 Question 72. Which is not true for a standard hydrogen electrode?
(a) The hydrogen ion concentration is 1 M
(b) Temperature is 25°C
(c) Pressure of hydrogen is 1 atmosphere
(d) It contains a metallic conductor which does not absorb hydrogen
Solution. Answer (from key): (d) It contains a metallic conductor which does not absorb hydrogen. The platinum black used does adsorb hydrogen, so statement (d) is false.
Teacher's Note: Standard conditions: 1 M H⁺, 1 atm H₂, 25°C; Pt black adsorbs H₂.
Exam Note: Pt black adsorbs H₂.
Set-1 Question 73. The electrode potential becomes equal to standard electrode potential when reactants and products ratio is:
(a) equal to 1
(b) greater than 1
(c) less than 1
(d) none of these
Solution. Answer (from key): (a) equal to 1. E = E° − (0.059/n) log Q = E° when Q = 1.
Teacher's Note: log 1 = 0 in the Nernst equation.
Exam Note: Q = 1 gives E = E°.
Set-1 Question 74. For the half-cell reaction Au3+ + 3e- → Au, the value of n used in Nernst equation is:
(a) 3
(b) 2
(c) 1
(d) 3 × 96500
Solution. Answer (from key): (a) 3. n is the number of electrons transferred, here 3.
Teacher's Note: n counts electrons in the half reaction.
Exam Note: n = 3 for Au³⁺.
Set-1 Question 75. When a piece of sodium metal is dropped in water, a reaction takes place to yield hydrogen because:
(a) sodium loses electrons
(b) sodium acts as an oxidising agent
(c) water loses electrons
(d) water acts as a reducing agent
Solution. Answer (from key): (a) sodium loses electrons. Na → Na+ + e-: sodium loses electrons and reduces water to H2.
Teacher's Note: Sodium is the reductant; water is reduced.
Exam Note: Na loses electrons.
Set-1 Question 76. Which one is the wrong statement about electrochemical series?
(a) Active metals have negative reduction potentials
(b) Active non-metals have positive reduction potentials
(c) Metals above hydrogen liberate hydrogen from acids
(d) Metals below hydrogen are strong reducing agents
Solution. Answer (from key): (d) Metals below hydrogen are strong reducing agents. Metals below hydrogen have positive E° and are weak reducing agents, so (d) is wrong.
Teacher's Note: Strong reductants have negative E°red.
Exam Note: Metals below H are weak reductants.
Set-1 Question 77. The reduction potential values are given below: Al3+/Al = −1.67 volt, Mg2+/Mg = −2.34 volt, Cu2+/Cu = +0.34 volt, I2/2I- = +0.53 volt. Which one is the best reducing agent?
(a) Al
(b) Mg
(c) Cu
(d) I2
Solution. Answer (from key): (b) Mg. The most negative reduction potential (Mg, −2.34 V) marks the strongest reducing agent.
Teacher's Note: Strongest reductant has the lowest E°red.
Exam Note: Compare E° of all four.
Set-1 Question 78. From the values given in question No. 77, which one is the best oxidising agent?
(a) Al
(b) Mg
(c) I2
(d) Cu
Solution. Answer (from key): (c) I2. I2/2I- (+0.53 V) has the highest reduction potential, so I2 is the best oxidising agent.
Teacher's Note: Highest E°red marks the strongest oxidant.
Exam Note: Reverse the logic of Q77.
Set-1 Question 79. When iron is rusted, it is:
(a) reduced
(b) oxidised
(c) evaporated
(d) decomposed
Solution. Answer (from key): (b) oxidised. Rusting is oxidation of Fe to Fe2+/Fe3+ (hydrated Fe2O3).
Teacher's Note: Metal corrosion is oxidation.
Exam Note: Corrosion means oxidation.
Set-1 Question 80. Galvanization of iron denotes coating with:
(a) Cu
(b) Sn
(c) Zn
(d) Al
Solution. Answer (from key): (c) Zn. Galvanisation coats iron with zinc, which protects it sacrificially.
Teacher's Note: Zn has lower E°red than Fe, so it corrodes first.
Exam Note: Galvanise = zinc coating.
Set-1 Question 81. The standard electrode potentials of four elements A, B, C and D are −3.05, 1.66, −0.40 and 0.80 volt. The highest chemical activity will be shown by:
(a) A
(b) B
(c) C
(d) D
Solution. Answer (from key): (a) A. Metal activity increases as E°red becomes more negative; A (−3.05 V) is most active.
Teacher's Note: Compare the signs and magnitudes of E°red.
Exam Note: Lowest E°red is most reactive.
Set-1 Question 82. Which of the following methods does not liberate hydrogen?
(a) Zn + H2SO4 (dil.)
(b) Mg + H2SO4 (dil.)
(c) Cu + H2SO4 (dil.)
(d) Zn + HCl (dil.)
Solution. Answer (from key): (c) Cu + H2SO4 (dil.). Cu lies below hydrogen in the series and does not displace H2 from dilute acid.
Teacher's Note: Only metals above H liberate hydrogen.
Exam Note: Cu does not react with dilute acids.
Set-1 Question 83. A depolarizer used in dry cell is:
(a) ammonium chloride
(b) manganese dioxide
(c) potassium oxide
(d) sodium phosphate
Solution. Answer (from key): (b) manganese dioxide. MnO2 oxidises the hydrogen formed at the cathode, depolarising the cell.
Teacher's Note: A depolariser removes the hydrogen film.
Exam Note: MnO₂ is the depolariser.
Set-1 Question 84. The oxide which can be reduced by hydrogen is:
(a) Na2O
(b) CaO
(c) K2O
(d) CuO
Solution. Answer (from key): (d) CuO. Hydrogen reduces oxides of less active metals: CuO + H2 → Cu + H2O.
Teacher's Note: Na, Ca, K oxides are too stable.
Exam Note: Cu is below H in the series.
Set-1 Question 85. The reference electrode is made from which of the following?
(a) ZnCl2
(b) CuSO4
(c) Hg2Cl2
(d) HgCl2
Solution. Answer (from key): (c) Hg2Cl2. The calomel electrode, based on Hg2Cl2, is a common reference electrode.
Teacher's Note: Calomel is Hg₂Cl₂, not HgCl₂.
Exam Note: Calomel electrode = Hg₂Cl₂.
Set-1 Question 86. Given, standard electrode potentials: Fe3+ + 3e- → Fe, E° = −0.036 volt; Fe2+ + 2e- → Fe, E° = −0.440 volt. The standard electrode potential E° for Fe3+ + e- → Fe2+ is: (AMU Medical 2007; AIEEE 2009)
(a) −0.476 volt
(b) −0.404 volt
(c) 0.440 volt
(d) 0.772 volt (printed −0.772 volt)
Solution. Answer (from key): (d) 0.772 volt (printed −0.772 volt). ΔG for Fe2+ + 2e- → Fe = −2F(−0.440) = 0.88F; for Fe3+ + 3e- → Fe = −3F(−0.036) = 0.108F. Subtracting gives Fe3+ + e- → Fe2+: ΔG = −0.772F, so E° = +0.772 V. The key letter (d) matches the value 0.772 V; the printed minus sign before 0.772 is a typographical slip.
Teacher's Note: Use ΔG = −nFE° for each step; potentials of different n cannot be subtracted directly.
Exam Note: Subtract ΔG values, then divide by nF.
Set-1 Question 87. K, Ca and Li metals may be arranged in the decreasing order of their standard electrode potentials as:
(a) K, Ca and Li
(b) Li, K and Ca
(c) Li, Ca and K
(d) Ca, Li and K
Solution. Answer (from key): (b) Li, K and Ca. The key gives (b) Li, K, Ca, which is the decreasing order of reducing power (E°ox: Li 3.05 > K 2.93 > Ca 2.87 V). Note: in terms of reduction potential the order would be Ca, K, Li, which is not an option.
Teacher's Note: Li (−3.05), K (−2.93), Ca (−2.87) V: reducing power falls in that order.
Exam Note: Check whether potentials are oxidation or reduction.
Set-1 Question 88. In a galvanic cell energy changes occur like:
(a) chemical energy → electrical energy
(b) electrical energy → chemical energy
(c) chemical energy → internal energy
(d) internal energy → electrical energy
Solution. Answer (from key): (a) chemical energy → electrical energy. A galvanic cell converts chemical energy of a spontaneous redox reaction into electrical energy.
Teacher's Note: Electrolytic cells do the reverse.
Exam Note: Galvanic: chemical to electrical.
Set-1 Question 89. The reaction is spontaneous if the cell potential is:
(a) positive
(b) negative
(c) zero
(d) infinite
Solution. Answer (from key): (a) positive. ΔG = −nFEcell is negative (spontaneous) when Ecell is positive.
Teacher's Note: Positive E gives negative ΔG.
Exam Note: Spontaneous means E > 0.
Set-1 Question 90. Is the reaction 2Al + 3Fe2+ ⇌ 2Al3+ + 3Fe possible?
(a) No, because standard oxidation potential of Al < Fe
(b) Yes, because standard oxidation potential of Al > Fe
(c) Cannot be predicted
(d) Yes, because aluminium is a strong oxidising agent
Solution. Answer (from key): (b) Yes, because standard oxidation potential of Al > Fe. Al (E°ox = +1.66 V) is a stronger reductant than Fe (+0.44 V), so Al reduces Fe2+: the reaction is feasible.
Teacher's Note: Compare E°ox: the higher one is oxidised.
Exam Note: Al is the reductant, not oxidant.
Set-1 Question 91. In an experimental set-up for the measurement of emf of a half-cell using a reference electrode and a salt bridge, when the salt bridge is removed, the voltage:
(a) does not change
(b) increases to maximum
(c) decreases half the value
(d) drops to zero
Solution. Answer (from key): (d) drops to zero. Without the salt bridge the circuit is open and ion flow stops, so the measured voltage drops to zero.
Teacher's Note: The bridge completes the electrical circuit.
Exam Note: No bridge, no complete circuit.
Set-1 Question 92. More electronegative elements have:
(a) negative reduction potential
(b) tendency to lose electrons
(c) positive reduction potential
(d) positive oxidation potential
Solution. Answer (from key): (c) positive reduction potential. Electronegative elements gain electrons readily, so they have positive reduction potentials.
Teacher's Note: High electron affinity means high E°red.
Exam Note: Gain electrons, positive E°red.
Set-1 Question 93. Which metal will be deposited in the galvanic cell Cu | Cu2+ || Ag+ | Ag?
(a) Cu
(b) Ag
(c) Both
(d) None of these
Solution. Answer (from key): (b) Ag. Ag+ has the higher E°red, so Ag deposits at the cathode while Cu dissolves.
Teacher's Note: The cathode is the more positive electrode.
Exam Note: Ag is cathode.
Set-1 Question 94. In the cell Zn | Zn2+ || Cu2+ | Cu, the negative electrode is:
(a) Cu
(b) Cu2+
(c) Zn
(d) Zn2+
Solution. Answer (from key): (c) Zn. Zn is oxidised (anode), which is the negative electrode of a galvanic cell.
Teacher's Note: Anode is negative in a galvanic cell.
Exam Note: Zn is anode and negative terminal.
Set-1 Question 95. Which of the following gains electrons more easily?
(a) Na+
(b) Zn2+
(c) Al3+
(d) H+
Solution. Answer (from key): (d) H+. H+ has the highest reduction potential (0.00 V) of these ions, so it gains electrons most easily.
Teacher's Note: Compare E°red: Na⁺ −2.71, Al³⁺ −1.66, Zn²⁺ −0.76, H⁺ 0.
Exam Note: Highest E°red gains electrons readily.
Set-1 Question 96. The potential of a hydrogen electrode at pH 10 is:
(a) 0.51 volt
(b) 0 volt
(c) −0.591 volt
(d) 0.059 volt
Solution. Answer (from key): (c) −0.591 volt. E = −0.059 pH = −0.059×10 = −0.591 V.
Teacher's Note: Hydrogen electrode potential is −0.059 pH.
Exam Note: Multiply 0.059 by pH.
Set-1 Question 97. The emf of the cell Ni | Ni2+ (1.0 M) || Ag+ (1.0 M) | Ag (E° for Ni2+/Ni = −0.25 volt, E° for Ag+/Ag = 0.80 volt) is given by:
(a) −0.25 + 0.80 = 0.55 volt
(b) −0.25 − (+0.80) = −1.05 volt
(c) 0 + 0.80 − (−0.25) = +1.05 volt
(d) −0.80 − (−0.25) = −0.55 volt
Solution. Answer (from key): (c) 0 + 0.80 − (−0.25) = +1.05 volt. E°cell = E°cathode − E°anode = 0.80 − (−0.25) = +1.05 V.
Teacher's Note: Subtract anode reduction potential from cathode.
Exam Note: Cathode minus anode.
Set-1 Question 98. The reaction for the cell Zn | Zn2+ (1.0 M) || Cd2+ (1.0 M) | Cd is:
(a) Cd → Cd2+ + 2e-
(b) Zn2+ → Zn − 2e-
(c) Cd + Zn2+ → Cd2+ + Zn
(d) Zn + Cd2+ → Cd + Zn2+
Solution. Answer (from key): (d) Zn + Cd2+ → Cd + Zn2+. Zn is the anode (oxidised) and Cd2+ the cathode (reduced): Zn + Cd2+ → Zn2+ + Cd.
Teacher's Note: Left electrode oxidation, right reduction.
Exam Note: Anode left, cathode right.
Set-1 Question 99. The position of some metals in the electrochemical series in decreasing electropositive character is given as Mg > Al > Zn > Cu > Ag. What will happen if a copper spoon is used to stir a solution of aluminium nitrate?
(a) The spoon will get coated with aluminium
(b) An alloy of aluminium and copper is formed
(c) The solution becomes blue
(d) There is no reaction
Solution. Answer (from key): (d) There is no reaction. Cu is less electropositive than Al, so it cannot displace Al3+: no reaction.
Teacher's Note: A metal displaces only less electropositive metals.
Exam Note: Cu cannot reduce Al³⁺.
Set-1 Question 100. The half-cell reaction is the one that:
(a) takes place at one electrode
(b) consumes half a unit of electricity
(c) involves half a mole of electrolyte
(d) goes half way to completion
Solution. Answer (from key): (a) takes place at one electrode. A half-cell reaction (oxidation or reduction) takes place at a single electrode.
Teacher's Note: Each electrode hosts one half reaction.
Exam Note: One half-reaction per electrode.
Set-1 Question 101. Which Nernst equation is true to find out the potential of non-standard electrochemical cell from the following? Fe(s) | Fe2+ (x M) || I- (aq.) | I2(s) (Pt) (CET Gujarat 2008)
(a) Ecell = E°cell − (0.592/n) log10[Fe2+][I-]2
(b) Ecell = E°cell − (0.0592/n) log10[Fe2+][I-]2
(c) Ecell = E°cell − (0.0592/n) log10[Fe2+][I-]
(d) Ecell = E°cell − (0.0592/nF) log10([Fe2+][I-]2/[Fe][I2])
Solution. Answer (from key): (b) Ecell = E°cell − (0.0592/n) log10[Fe2+][I-]2. Cell reaction Fe + I2 → Fe2+ + 2I-: Q = [Fe2+][I-]2 (solids omitted), and the factor is 0.0592/n.
Teacher's Note: Omit pure solids from Q; raise [I⁻] to the power 2.
Exam Note: Q has no solids; factor 0.0592/n.
Set-1 Question 102. During the electrolysis of fused NaCl, which reaction occurs at anode?
(a) Chloride ions are oxidised
(b) Sodium ions are oxidised
(c) Chloride ions are reduced
(d) Sodium ions are reduced
Solution. Answer (from key): (a) Chloride ions are oxidised. At the anode Cl- is oxidised: 2Cl- → Cl2 + 2e-.
Teacher's Note: Anions are oxidised at the anode.
Exam Note: Anode oxidises Cl⁻.
Set-1 Question 103. E°(Ni2+/Ni) = −0.25 volt, E°(Au3+/Au) = 1.50 volt. The emf of the voltaic cell Ni | Ni2+ (1.0 M) || Au3+ (1.0 M) | Au is:
(a) 1.25 volt
(b) −1.75 volt
(c) 1.75 volt
(d) 4.0 volt
Solution. Answer (from key): (c) 1.75 volt. E°cell = 1.50 − (−0.25) = 1.75 V.
Teacher's Note: Cathode minus anode; do not scale E° by electron count.
Exam Note: Intensive property: no n multiplier.
Set-1 Question 104. Which of the following does not occur at cathode?
(a) Ag+ → Ag − e-
(b) Fe2+ → Fe3+ + e-
(c) Cu2+ + 2e- → Cu
(d) 2H+ → H2 − 2e-
Solution. Answer (from key): (b) Fe2+ → Fe3+ + e-. Cathode reactions gain electrons; Fe2+ → Fe3+ + e- is oxidation, so it occurs at the anode.
Teacher's Note: Options (a), (c), (d) are reductions written with electrons on either side.
Exam Note: Spot the electron-losing step.
Set-1 Question 105. The strong oxidising agent has:
(a) high value of reduction potential
(b) high value of oxidation potential
(c) low value of reduction potential
(d) high tendency to lose electrons
Solution. Answer (from key): (a) high value of reduction potential. A strong oxidant readily gains electrons, i.e. has a high reduction potential.
Teacher's Note: High E°red means strong oxidising power.
Exam Note: Oxidant = electron gainer.
Set-1 Question 106. The passage of electricity in the Daniell cell when Zn and Cu electrodes are connected is from:
(a) Cu to Zn in the cell
(b) Cu to Zn outside the cell
(c) Zn to Cu outside the cell
(d) Zn to Cu in the cell
Solution. Answer (from key): (b) Cu to Zn outside the cell. Electrons flow from Zn (anode) to Cu (cathode) through the external circuit, as the key states (conventional current is in the opposite direction).
Teacher's Note: Zn is oxidised and releases electrons, which move through the wire to Cu.
Exam Note: Electrons travel Zn to Cu externally.
Set-1 Question 107. Which of the following can be used as an electrode?
(a) A glass rod
(b) A wooden stick
(c) A nail
(d) A soda straw
Solution. Answer (from key): (c) A nail. An electrode must conduct electricity; only a metal nail does.
Teacher's Note: Glass, wood and straw are insulators.
Exam Note: Electrodes must be conductors.
Set-1 Question 108. H+ ions are reduced at platinum electrode prior to:
(a) Zn2+
(b) Cu2+
(c) Ag+
(d) I2
Solution. Answer (from key): (a) Zn2+. H+ (0.00 V) is reduced before ions of lower E° such as Zn2+ (−0.76 V).
Teacher's Note: Higher E°red discharges first at the cathode.
Exam Note: Compare E°red with 0.00 V.
Set-1 Question 109. Which of the following statements is wrong?
(a) F2 is the strongest oxidising agent as its reduction potential is high
(b) Li is the weakest reducing agent as its reduction potential is low
(c) Li is the strongest reducing agent as its oxidation potential is high
(d) F- ion does not show reducing property
Solution. Answer (from key): (b) Li is the weakest reducing agent as its reduction potential is low. Li has a very low reduction potential and so is the strongest, not weakest, reducing agent; statement (b) is wrong.
Teacher's Note: Low E°red means strong reductant.
Exam Note: Li is the best reductant.
Set-1 Question 110. Out of Cu, Ag, Fe and Zn, the metal which can displace all others from their salt solution is:
(a) Ag
(b) Cu
(c) Fe
(d) Zn
Solution. Answer (from key): (d) Zn. Zn has the lowest reduction potential among them and displaces Cu, Ag and Fe.
Teacher's Note: The most electropositive metal displaces all others.
Exam Note: Zn is most active here.
Set-1 Question 111. When the electric current is passed through a cell having an electrolyte, the positive ions move towards cathode and negative ions towards the anode. If the cathode is pulled out of the solution:
(a) the positive and negative ions will move towards anode
(b) the positive ions will start moving towards the anode while negative ions will stop moving
(c) the negative ions will continue to move towards anode while positive ions will stop moving
(d) the positive and negative ions will start moving randomly
Solution. Answer (from key): (d) the positive and negative ions will start moving randomly. With no electric field (circuit broken) ions move randomly by thermal motion.
Teacher's Note: Directional drift needs a closed circuit.
Exam Note: No field, no net migration.
Set-1 Question 112. The oxidation potentials of Zn, Cu, Ag, H2 and Ni are 0.76, −0.34, −0.80, 0 and 0.25 volt respectively. Which of the following reactions will provide maximum voltage? (PET Kerala 2007)
(a) Zn + Cu2+ → Cu + Zn2+
(b) Zn + 2Ag+ → 2Ag + Zn2+
(c) H2 + Cu2+ → 2H+ + Cu
(d) H2 + Ni2+ → 2H+ + Ni
Solution. Answer (from key): (b) Zn + 2Ag+ → 2Ag + Zn2+. E° values: Zn/Cu 0.76 − 0.34 = 1.10 V; Zn/Ag 0.76 + 0.80 = 1.56 V (maximum); H2/Cu 0.34 V; H2/Ni −0.25 V.
Teacher's Note: Pair the most active anode with the most noble cathode.
Exam Note: Add oxidation and reduction potentials.
Set-1 Question 113. Which one of the following will increase the voltage of the cell Sn + 2Ag+ → Sn2+ + 2Ag?
(a) Increase in the size of silver rod
(b) Increase in the concentration of Sn2+ ions
(c) Increase in the concentration of Ag+ ions
(d) None of the above
Solution. Answer (from key): (c) Increase in the concentration of Ag+ ions. E = E° − (0.059/2) log([Sn2+]/[Ag+]2), so raising [Ag+] raises E.
Teacher's Note: Reactant concentration up means E up.
Exam Note: Electrode size does not matter.
Set-1 Question 114. A chemist wants to produce Cl2(g) from molten NaCl. How many grams of Cl2 could be produced if he uses a steady current of 2 ampere for 2.5 minutes?
(a) 3.55 g
(b) 1.775 g
(c) 0.110 g
(d) 0.1775 g
Solution. Answer (from key): (c) 0.110 g. Q = it = 2×150 = 300 C; mass = 300×35.5/96500 = 0.110 g.
Teacher's Note: Convert minutes to seconds; equivalent mass of Cl = 35.5.
Exam Note: Time must be in seconds.
Set-1 Question 115. In the electrolysis of CuCl2 solution, the mass of cathode increased by 6.4 g. What occurred at copper anode?
(a) 0.224 litre of Cl2 was liberated
(b) 1.12 litre of oxygen was liberated
(c) 0.05 mole Cu2+ passed into the solution
(d) 0.1 mole Cu2+ passed into the solution
Solution. Answer (from key): (d) 0.1 mole Cu2+ passed into the solution. 6.4 g Cu deposited = 0.1 mol; with a copper anode, equal copper dissolves: 0.1 mol Cu2+ passes into solution.
Teacher's Note: With an active Cu anode, Cu dissolves instead of Cl⁻ oxidising.
Exam Note: Anode copper dissolves equally.
Set-1 Question 116. Consider the reaction Cl2(g) + 2Br-(aq) → 2Cl-(aq) + Br2. The emf of the cell, when [Cl-] = [Br-] = 0.01 M and Cl2 gas is at 1 atm pressure, will be: (E° for the above reaction is 0.29 volt)
(a) 0.54 volt
(b) 0.35 volt
(c) 0.24 volt
(d) −0.29 volt
Solution. Answer (from key): (b) 0.35 volt. Taking [Br2] = 0.01 M as well, Q = [Cl-]2[Br2]/([Br-]2PCl2) = 0.01. E = 0.29 − (0.0591/2) log 0.01 = 0.29 + 0.059 = 0.35 V.
Teacher's Note: Write Q from the balanced reaction; dissolved Br₂ appears in the numerator.
Exam Note: Use Q = 0.01 in the Nernst equation.
Set-1 Question 117. If λ°c, λ°a and λ° refer to equivalent conductance of a cation, an anion and equivalent conductance of the salt at infinite dilution, then according to Kohlrausch's law:
(a) λ° = λ°c + λ°a
(b) λ° = λ°c − λ°a
(c) λ° = λ°a − λ°c
(d) λ° = λ°c / λ°a
Solution. Answer (from key): (a) λ° = λ°c + λ°a. Kohlrausch: limiting equivalent conductance of a salt is the sum of the ionic contributions, λ° = λ°c + λ°a.
Teacher's Note: Independent migration of ions means the contributions add.
Exam Note: Sum, not difference.
Set-1 Question 118. How much silver will be obtained by that quantity of current which displaces 5.6 litre of H2? (PMT Pb. 1993)
(a) 54 g
(b) 13.5 g
(c) 20 g
(d) 108 g
Solution. Answer (from key): (a) 54 g. 5.6 L H2 at STP = 0.25 mol = 0.5 equivalent, so Ag = 0.5×108 = 54 g.
Teacher's Note: Equal equivalents are liberated in series.
Exam Note: Moles of H₂ × 2 = equivalents.
Set-1 Question 119. The specific conductance of a salt of 0.01 M concentration is 1.061×10-4. Molar conductance of the same solution will be: (PMT Pb. 1993)
(a) 1.061×10-4
(b) 1.061
(c) 10.61
(d) 106.1
Solution. Answer (from key): (c) 10.61. Λm = κ×1000/C = 1.061×10-4×1000/0.01 = 10.61.
Teacher's Note: Λ = 1000κ/M.
Exam Note: Multiply κ by 1000/C.
Set-1 Question 120. What is the number of coulombs required for the conversion of one mole of MnO4- to one mole of Mn2+? (MBBS Orissa 1993)
(a) 5×96500
(b) 3×96500
(c) 96500
(d) 9650
Solution. Answer (from key): (a) 5×96500. MnO4- + 8H+ + 5e- → Mn2+ + 4H2O: 5 faraday = 5×96500 C.
Teacher's Note: Count electrons from the change in oxidation state, +7 to +2.
Exam Note: n = 5 for Mn(VII) to Mn(II).
Set-1 Question 121. Which of the following solutions of NaCl will have the highest specific conductance?
(a) 0.001 N
(b) 0.1 N
(c) 0.01 N
(d) 1.0 N
Solution. Answer (from key): (d) 1.0 N. Specific conductance rises with ion concentration, so 1.0 N is highest.
Teacher's Note: More ions per volume means larger κ.
Exam Note: κ rises with concentration.
Set-1 Question 122. The equivalent conductance of a 1 N solution of an electrolyte is nearly:
(a) 103 times its specific conductance
(b) 10-3 times its specific conductance
(c) 100 times its specific conductance
(d) the same as its specific conductance
Solution. Answer (from key): (a) 103 times its specific conductance. Λ = 1000κ/N = 103κ for N = 1.
Teacher's Note: Λ = κ × (1000/N).
Exam Note: Factor 1000 for N = 1.
Set-1 Question 123. Zinc is coated over iron to prevent rusting of iron because:
(a) it is cheaper than iron
(b) E°Zn2+/Zn = E°Fe2+/Fe
(c) E°Zn2+/Zn < E°Fe2+/Fe
(d) E°Zn2+/Zn > E°Fe2+/Fe
Solution. Answer (from key): (c) E°Zn2+/Zn < E°Fe2+/Fe. Zn (−0.76 V) is more easily oxidised than Fe (−0.44 V), so zinc corrodes first and protects iron.
Teacher's Note: Sacrificial protection depends on the lower E°red metal.
Exam Note: Zn sacrifices itself.
Set-1 Question 124. Free energy change (ΔG) is related to the emf of the cell (E) by:
(a) E = −nF ΔG
(b) ΔG = −nFE
(c) ΔG = −(RT/n)F log E
(d) ΔG = −(nF/RT) log E
Solution. Answer (from key): (b) ΔG = −nFE. The thermodynamic relation is ΔG = −nFE.
Teacher's Note: Positive E corresponds to negative ΔG.
Exam Note: Remember ΔG = −nFE.
Set-1 Question 125. The standard reduction potentials at 25°C of Li+/Li, Ba2+/Ba, Na+/Na and Mg2+/Mg are −3.05, −2.73, −2.71 and −2.37 volt respectively. Which one of the following is the strongest oxidising agent?
(a) Na+
(b) Li+
(c) Ba2+
(d) Mg2+
Solution. Answer (from key): (d) Mg2+. Mg2+ has the highest (least negative) reduction potential, so it is the strongest oxidising agent.
Teacher's Note: Highest E°red marks the strongest oxidant.
Exam Note: Pick the least negative E°.
Set-1 Question 126. Three faradays of electricity was passed through an aqueous solution of iron(II) bromide. The mass of iron metal (At. mass 56) deposited at the cathode is: (EAMCET 1991)
(a) 56 g
(b) 84 g
(c) 112 g
(d) 168 g
Solution. Answer (from key): (b) 84 g. Fe2+ + 2e- → Fe: 3 F deposits 3/2 mol = 1.5×56 = 84 g.
Teacher's Note: Equivalent mass of Fe(II) = 56/2 = 28.
Exam Note: Mass = equivalents × 28.
Set-1 Question 127. The standard electrode potentials of Zn, Ag and Cu are −0.76, 0.80 and 0.34 volt respectively; then:
(a) Ag can oxidise Zn and Cu
(b) Ag can reduce Zn2+ and Cu2+
(c) Zn can reduce Ag+ and Cu2+
(d) Cu can oxidise Zn and Ag
Solution. Answer (from key): (c) Zn can reduce Ag+ and Cu2+. Zn (−0.76 V) is the lowest, so it reduces Ag+ and Cu2+.
Teacher's Note: The lower E°red metal reduces ions of higher E°red.
Exam Note: Zn is the strongest reductant.
Set-1 Question 128. The standard emf for the cell reaction Zn + Cu2+ → Zn2+ + Cu is 1.10 volt at 25°C. The emf for the cell reaction when 0.1 M Cu2+ and 0.1 M Zn2+ solutions are used at 25°C is: (MLNR 1994)
(a) 1.10 volt
(b) 0.110 volt
(c) −1.10 volt
(d) −0.110 volt
Solution. Answer (from key): (a) 1.10 volt. Q = [Zn2+]/[Cu2+] = 1, so log Q = 0 and E = E° = 1.10 V.
Teacher's Note: Equal concentrations give Q = 1.
Exam Note: Q = 1 means E = E°.
Set-1 Question 129. Three mole of electrons are passed through three solutions in succession containing AgNO3, CuSO4 and AuCl3 respectively. The ratio of amounts of cations reduced at cathode will be:
(a) 1 : 2 : 3
(b) 2 : 1 : 3
(c) 3 : 2 : 1
(d) 6 : 3 : 2
Solution. Answer (from key): (d) 6 : 3 : 2. Moles deposited = 3/1 : 3/2 : 3/3 = 3 : 1.5 : 1 = 6 : 3 : 2.
Teacher's Note: Divide the moles of electrons by the ion charge.
Exam Note: Moles = F/charge.
Set-1 Question 130. In the electrolysis of an aqueous solution of NaOH, 2.8 litre of oxygen gas at NTP was liberated at anode. How much hydrogen was liberated at cathode?
(a) 2.8 litre
(b) 5.6 litre
(c) 11.2 litre
(d) 22.4 litre
Solution. Answer (from key): (b) 5.6 litre. Equivalent volumes at NTP: O2 5.6 L and H2 11.2 L per faraday. 2.8 L O2 = 0.5 F-equivalent, which gives 5.6 L H2.
Teacher's Note: Volume ratio H₂ : O₂ = 2 : 1 in water electrolysis.
Exam Note: H₂ is double the O₂ volume.
Set-1 Question 131. Two half-cells have potentials −0.44 and 0.799 volt respectively. These two are coupled to make a galvanic cell. Which of the following will be true?
(a) Electrode of half-cell potential −0.44 V will act as anode
(b) Electrode of half-cell potential −0.44 V will act as cathode
(c) Electrode of half-cell potential 0.799 V will act as anode
(d) Electrode of half-cell potential −0.44 V will act as a positive terminal
Solution. Answer (from key): (a) Electrode of half-cell potential −0.44 V will act as anode. The lower reduction potential (−0.44 V) is oxidised, so it is the anode.
Teacher's Note: The half-cell with the lower E°red is the anode.
Exam Note: Anode has the lower E°red.
Set-1 Question 132. When a lead storage battery is charged:
(a) PbO2 dissolves
(b) the lead electrode becomes coated with lead sulphate
(c) sulphuric acid is regenerated
(d) the amount of acid decreases
Solution. Answer (from key): (c) sulphuric acid is regenerated. Charging reverses discharge: PbSO4 + 2H2O → PbO2 + Pb + 2H2SO4, regenerating sulphuric acid.
Teacher's Note: Discharge consumes H₂SO₄; charge restores it.
Exam Note: Charging regenerates acid.
Set-1 Question 133. An example of a simple fuel cell is:
(a) lead storage battery
(b) H2 — O2 cell
(c) Daniell cell
(d) Leclanche cell
Solution. Answer (from key): (b) H2 — O2 cell. The H2–O2 cell converts fuel energy directly to electricity.
Teacher's Note: Fuel cells use continuously supplied reactant gases.
Exam Note: H₂–O₂ is the standard fuel cell.
Set-1 Question 134. For the cell reaction Mg(s) + 2Ag+(aq) ⇌ Mg2+(aq) + 2Ag(s), E°cell is +3.17 V at 298 K. The value of Ecell, ΔG° and Q at Ag+ and Mg2+ concentrations of 0.001 M and 0.02 M respectively are: (ISAT 2010)
(a) 3.04 V, −605.8 kJ mol-1, 20000
(b) 3.04 V, 611.8 kJ mol-1, 20000
(c) 3.13 V, −604 kJ mol-1, 20
(d) 3.04 V, −611.8 kJ, 20000
Solution. Answer (from key): (d) 3.04 V, −611.8 kJ, 20000. Q = [Mg2+]/[Ag+]2 = 0.02/(0.001)2 = 20000. ΔG° = −nFE° = −2×96500×3.17 = −611.8 kJ. E = 3.17 − (0.059/2) log 20000 = 3.17 − 0.127 = 3.04 V.
Teacher's Note: n = 2; square the Ag⁺ concentration in Q.
Exam Note: Compute Q, ΔG° and E separately.
Set-1 Question 135. Which of the following statements is correct?
(a) The temperature coefficient of electrolytic conductance is positive
(b) The temperature coefficient of electrolytic resistance is negative
(c) The resistance of an electrolyte decreases with decreasing temperature
(d) The resistance of electrolytic conductors is independent of temperature
Solution. Corrected: Answer (a) The temperature coefficient of electrolytic conductance is positive. (key prints (d)) Conductance of an electrolyte rises with temperature, so statements (a) and (b) are both true as printed. Corrected: the printed key gives (d), which is false; answer (a) (and (b) also holds).
Teacher's Note: Higher temperature lowers viscosity and raises ion mobility.
Exam Note: Electrolyte resistance falls as T rises.
Set-1 Question 136. Kohlrausch's law states that at: (CBSE PMT 2008)
(a) infinite dilution, each ion makes definite contribution to conductance of an electrolyte, whatever be the nature of the other ion of the electrolyte
(b) infinite dilution, each ion makes definite contribution to equivalent conductance of an electrolyte, whatever be the nature of the other ion of the electrolyte
(c) finite dilution, each ion makes definite contribution to the equivalent conductance of an electrolyte, whatever be the nature of the other ion of the electrolyte
(d) infinite dilution, each ion makes definite contribution to equivalent conductance of an electrolyte depending on the nature of the other ion of the electrolyte
Solution. Corrected: Answer (b) infinite dilution, each ion makes definite contribution to equivalent conductance of an electrolyte, whatever be the nature of the other ion of the electrolyte. (key prints (a)) Kohlrausch's law of independent migration refers to equivalent (molar) conductance at infinite dilution, independent of the other ion. Corrected: the printed key gives (a), but (b) states the law precisely.
Teacher's Note: The law applies to limiting equivalent conductance, at infinite dilution.
Exam Note: Say equivalent conductance at infinite dilution.
Set-1 Question 137. Which one of the following conditions will increase the voltage of the cell represented by the equation Cu(s) + 2Ag+(aq) ⇌ Cu2+(aq) + 2Ag(s)? (KCET 2006)
(a) Increase in the dimension of Cu electrode
(b) Increase in the dimension of Ag electrode
(c) Increase in the concentration of Cu2+ ion
(d) Increase in the concentration of Ag+ ion
Solution. Answer (from key): (d) Increase in the concentration of Ag+ ion. E = E° − (0.059/2) log([Cu2+]/[Ag+]2), so raising [Ag+] raises E (the printed hint also mentions lowering [Ag+], which is a slip).
Teacher's Note: Increase a reactant concentration to raise E.
Exam Note: Electrode size is irrelevant.
Set-1 Question 138. Which of the following reactions occurs at cathode during charging of storage battery? (MGIMS 2007)
(a) Pb2+ + 2e- → Pb
(b) Pb → Pb2+ + 2e-
(c) Pb2+ + SO42- → PbSO4
(d) PbSO4 + 2H2O → PbO2 + 4H+ + SO42- + 2e-
Solution. Answer (from key): (a) Pb2+ + 2e- → Pb. On charging, the cathode reaction is reduction of lead ions to lead, Pb2+ + 2e- → Pb (via PbSO4 + 2e- → Pb + SO42-).
Teacher's Note: Cathode means reduction; lead sulphate returns to lead.
Exam Note: Charging reverses discharge at each electrode.
Set-1 Question 139. The amount of silver deposited on passing 2F of electricity through aqueous solution of AgNO3 is: (MHT-CET 2007)
(a) 54 g
(b) 108 g
(c) 216 g
(d) 324 g
Solution. Answer (from key): (c) 216 g. Ag+ + e- → Ag: 2 F deposits 2×108 = 216 g.
Teacher's Note: Equivalent mass of Ag = 108.
Exam Note: Mass = F × 108.
Set-1 Question 140. Statements: (i) Unit of specific conductivity is ohm-1 cm-1. (ii) Specific conductivity of strong electrolytes decreases on dilution. (iii) The amount of an ion discharged during electrolysis does not depend upon resistance. (iv) The unit of electrochemical equivalent is g/coulomb.
(a) All are correct
(b) All are wrong
(c) Only (i), (ii) and (iv) are correct
(d) Only (ii), (iii) and (iv) are correct
Solution. Answer (from key): (a) All are correct. (i) κ has unit ohm-1 cm-1; (ii) κ falls on dilution; (iii) deposition depends on charge, not resistance; (iv) Z has unit g C-1. All four are correct.
Teacher's Note: Check each statement against definitions.
Exam Note: Verify each of the four statements.
Set-1 Question 141. Which among the following expressions is/are not correct?
(a) μ∞ = γ+λ+∞ + γ-λ-∞
(b) λ∞ = (1/n+)λ+∞ + (1/n-)λ-∞
(c) λ∞cation = μ∞cation × faraday
(d) λ∞anion = μ∞cation × faraday
Solution. Answer (from key): (d) λ∞anion = μ∞cation × faraday. Ionic conductance of an ion equals its own mobility times faraday; (d) uses the cation mobility for the anion, which is wrong.
Teacher's Note: λ = μF applies to the same ion.
Exam Note: Keep cation with cation, anion with anion.
Set-1 Question 142. For the electrochemical cell M | M+ || X- | X, E°M+/M = 0.44 V and E°X/X- = 0.33 V. From this data we can deduce that: (IIT Screening 2000)
(a) M + X → M+ + X- is the spontaneous reaction
(b) M+ + X- → M + X is the spontaneous reaction
(c) Ecell = 0.77 V
(d) Ecell = −0.77 V
Solution. Answer (from key): (b) M+ + X- → M + X is the spontaneous reaction. With these potentials the cell as written has E = 0.33 − 0.44 = −0.11 V (non-spontaneous), so the reverse reaction M+ + X- → M + X is spontaneous (E = +0.11 V).
Teacher's Note: Compare which couple has the higher reduction potential.
Exam Note: Negative E° means the reverse reaction occurs.
Set-1 Question 143. For the cell reaction Cu2+(aq.) + Zn(s) → Zn2+(aq.) + Cu(s) with concentrations C1 (Cu2+) and C2 (Zn2+), the change in free energy (ΔG) at a given temperature is a function of: (CBSE 1998)
(a) ln C1
(b) ln(C2/C1)
(c) ln(C1 + C2)
(d) ln C2
Solution. Answer (from key): (b) ln(C2/C1). ΔG = ΔG° + RT ln Q with Q = [Zn2+]/[Cu2+] = C2/C1.
Teacher's Note: ΔG depends on the reaction quotient.
Exam Note: Write Q before choosing.
Set-1 Question 144. The standard reduction potential values of three metallic cations X, Y and Z are 0.52, −3.03 and −1.18 V respectively. The order of reducing powers of the corresponding metals is: (IIT 1998)
(a) Y > Z > X
(b) X > Y > Z
(c) Z > Y > X
(d) Z > X > Y
Solution. Answer (from key): (a) Y > Z > X. The lower the reduction potential, the stronger the reducing metal: Y (−3.03) > Z (−1.18) > X (0.52).
Teacher's Note: Rank metals by increasing E°red for decreasing reducing power.
Exam Note: Lowest E°red is the best reductant.
Set-1 Question 145. A gas X at 1 atm is bubbled through a solution containing a mixture of 1 M Y- and 1 M Z- at 25°C. If the reduction potential of Z > Y > X, then: (IIT 1999)
(a) Y will oxidise X and not Z
(b) Y will oxidise Z and not X
(c) Y will oxidise both Z and X
(d) Y will reduce both X and Z
Solution. Answer (from key): (a) Y will oxidise X and not Z. A species oxidises those with lower reduction potential: Y (potential between X and Z) oxidises X but not Z.
Teacher's Note: A couple with higher E°red oxidises the one with lower E°red.
Exam Note: Place the potentials on a line.
Set-1 Question 146. The number of coulombs required for the deposition of 107.87 g of silver is: (PMT MP 1998)
(a) 48250
(b) 10000
(c) 96500
(d) 19300
Solution. Answer (from key): (c) 96500. 107.87 g is one mole of Ag, requiring one faraday = 96500 C.
Teacher's Note: Ag⁺ needs one electron per atom.
Exam Note: One mole Ag = 96500 C.
Set-1 Question 147. At 25°C, the standard emf of a cell having reaction involving two electrons change is found to be 0.295 V. The equilibrium constant of the reaction is: (IIT 1999)
(a) 29.5×10-2
(b) 10
(c) 1×1010
(d) 29.5×1010
Solution. Answer (from key): (c) 1×1010. log K = nE°/0.059 = 2×0.295/0.059 = 10, so K = 1×1010.
Teacher's Note: Use log K = nE°/0.059 at 25°C.
Exam Note: Substitute n = 2.
Set-1 Question 148. The emf of the cell in which the following reaction, Zn(s) + Ni2+(0.1 M) → Zn2+(1.0 M) + Ni(s), occurs, is found to be 0.5105 V at 298 K. The standard emf of the cell is: (IIT 1998)
(a) 0.4810 V
(b) 0.5696 V
(c) −0.5105 V
(d) 0.5400 V
Solution. Answer (from key): (d) 0.5400 V. E = E° − (0.059/2) log([Zn2+]/[Ni2+]) = E° − 0.0295 log 10, so E° = 0.5105 + 0.0295 = 0.5400 V.
Teacher's Note: Q = 1.0/0.1 = 10; add back the Nernst correction.
Exam Note: Compute Q first.
Set-1 Question 149. The molar conductances of NaCl, HCl and CH3COONa at infinite dilution are 126.45, 426.16 and 91 ohm-1 cm2 mol-1 respectively. The molar conductance of CH3COOH at infinite dilution is: (CBSE 1997; DCE 2009)
(a) 201.28 ohm-1 cm2 mol-1
(b) 390.71 ohm-1 cm2 mol-1
(c) 698.28 ohm-1 cm2 mol-1
(d) 540.48 ohm-1 cm2 mol-1
Solution. Answer (from key): (b) 390.71 ohm-1 cm2 mol-1. Λ°(CH3COOH) = Λ°(HCl) + Λ°(CH3COONa) − Λ°(NaCl) = 426.16 + 91 − 126.45 = 390.71.
Teacher's Note: Kohlrausch's law: combine strong electrolytes to cancel Na⁺ and Cl⁻.
Exam Note: Add HCl, subtract NaCl.
Set-1 Question 150. The specific conductance of a 0.1 N KCl solution at 23°C is 0.0112 ohm-1 cm-1. The resistance of the cell containing the solution at the same temperature was found to be 55 ohm. The cell constant will be: (CBSE 1999)
(a) 0.142 cm-1
(b) 0.918 cm-1
(c) 1.12 cm-1
(d) 0.616 cm-1
Solution. Answer (from key): (d) 0.616 cm-1. Cell constant = κ × R = 0.0112 × 55 = 0.616 cm-1.
Teacher's Note: l/a equals specific conductance times measured resistance.
Exam Note: Multiply κ by R.
Set-1 Question 151. Which of the following plots correctly represents variation of equivalent conductance (Λ) with dilution for a strong electrolyte? (four graphs of Λ against dilution: (a) rises to a maximum then falls; (b) rises steeply and then flattens towards a limiting value; (c) straight line rising; (d) falling curve)
(a) Plot (a)
(b) Plot (b)
(c) Plot (c)
(d) Plot (d)
Solution. Answer (from key): (b) Plot (b). For a strong electrolyte Λ rises slowly with dilution and approaches the limiting value Λ°, giving a curve that flattens (plot (b)).
Teacher's Note: Strong electrolytes show only a small rise to a plateau.
Exam Note: Sketch Λ rising to a plateau.
Set-1 Question 152. The standard reduction potential for Cu2+/Cu and Cu2+/Cu+ are 0.337 V and 0.153 V respectively. The standard electrode potential of Cu+/Cu half cell is: (AMU PMT 2009; CBSE PMT 2009)
(a) 0.184 V
(b) 0.827 V
(c) 0.521 V
(d) 0.490 V
Solution. Answer (from key): (c) 0.521 V. Free energies: 2(0.337) = 1(0.153) + 1(E°), so E° = 0.674 − 0.153 = 0.521 V.
Teacher's Note: Potentials with different n combine through nE°.
Exam Note: Use ΔG = −nFE°.
Set-1 Question 153. Solubility of a sparingly soluble salt S, specific conductance κ and the equivalent conductance Λ0 are related as: (IAS Pre. 1997)
(a) S = (1000/κ)Λ0
(b) S = κΛ0
(c) S = κ/(1000Λ0)
(d) S = 1000κ/Λ0
Solution. Answer (from key): (d) S = 1000κ/Λ0. Λ = 1000κ/S for a very dilute saturated solution, so S = 1000κ/Λ0.
Teacher's Note: Saturated solution is so dilute that Λ ≈ Λ°.
Exam Note: Rearrange Λ = 1000κ/S.
Set-1 Question 154. 2Ag+(aq.) + Cu(s) ⇌ Cu2+(aq.) + 2Ag(s) (E°cell = +0.46 V). Which change will increase potential the most?
(a) Doubling the [Ag+]
(b) Halving the [Cu2+]
(c) Doubling the size of Cu electrode
(d) Halving the size of Ag electrode
Solution. Answer (from key): (a) Doubling the [Ag+]. E = E° − (0.059/2) log([Cu2+]/[Ag+]2). Doubling [Ag+] raises E by 0.059 log 2 = 0.018 V; halving [Cu2+] raises it by 0.009 V; electrode size has no effect.
Teacher's Note: Ag⁺ is squared in Q, so it has twice the effect.
Exam Note: Squared term gives larger shift.
Set-1 Question 155. As a lead storage battery is charged: (PMT MP 1993, 2000)
(a) lead dioxide dissolves
(b) sulphuric acid is regenerated
(c) lead electrode becomes coated with lead sulphate
(d) the concentration of sulphuric acid decreases
Solution. Answer (from key): (b) sulphuric acid is regenerated. On charging, PbSO4 is converted back to Pb and PbO2 and H2SO4 is regenerated.
Teacher's Note: Concentration of acid rises while charging.
Exam Note: Charging regenerates acid.
Set-1 Question 156. In the electrochemical reaction 2Fe3+ + Zn → Zn2+ + 2Fe2+, increasing the concentration of Fe2+: (CEE Kerala 2000)
(a) increases the cell emf
(b) increases the current flow
(c) decreases the cell emf
(d) alters the pH of the solution
Solution. Answer (from key): (c) decreases the cell emf. Fe2+ is a product, so raising its concentration increases Q and lowers Ecell.
Teacher's Note: E = E° − (RT/nF) ln Q.
Exam Note: Product increase means emf decrease.
Set-1 Question 157. In the cell reaction Cu(s) + 2Ag+(aq.) → Cu2+(aq.) + 2Ag(s), E°cell = 0.46 V. By doubling the concentration of Cu2+, E°cell is: (MEE Kerala 2000)
(a) doubled
(b) halved
(c) increased but less than double
(d) decreased by a small fraction
Solution. Answer (from key): (d) decreased by a small fraction. Doubling [Cu2+] raises Q, so the cell emf E decreases slightly: ΔE = −(0.059/2) log 2 ≈ −0.009 V (the standard value E° itself is unchanged).
Teacher's Note: Concentration changes E through the log term, not E°.
Exam Note: E falls by about 0.009 V.
Set-1 Question 158. The conductivity of 0.01 mol/dm3 aqueous acetic acid at 300 K is 19.5×10-5 ohm-1 cm-1 and the limiting molar conductivity of acetic acid at the same temperature is 390 ohm-1 cm2 mol-1. The degree of dissociation of acetic acid is: (IAS Pre. 1995)
(a) 0.5
(b) 0.05
(c) 5×10-3
(d) 5×10-7
Solution. Answer (from key): (b) 0.05. Λm = κ×1000/C = 19.5×10-5×1000/0.01 = 19.5; α = 19.5/390 = 0.05.
Teacher's Note: Convert mol/dm³ and κ in cm units consistently via ×1000.
Exam Note: α = Λm/Λ°.
Set-1 Question 159. The ionization constant of a weak electrolyte is 25×10-6 while the equivalent conductance of its 0.01 M solution is 19.6 S cm2 eq-1. The equivalent conductance of the electrolyte at infinite dilution (in S cm2 eq-1) will be: (IAS Pre. 1998)
(a) 250
(b) 196
(c) 392
(d) 384
Solution. Answer (from key): (c) 392. K = Cα²: 25×10-6 = 0.01α², α = 0.05. Λ° = Λ/α = 19.6/0.05 = 392.
Teacher's Note: First find α from K and C, then Λ° = Λ/α.
Exam Note: Λ° = Λ/α.
Set-1 Question 160. What is the amount of chlorine evolved when 2 ampere of current is passed for 30 minutes in an aqueous solution of NaCl? (BHU 1998; AIIMS 1999)
(a) 66 g
(b) 1.32 g
(c) 33 g
(d) 99 g
Solution. Answer (from key): (b) 1.32 g. Q = 2×1800 = 3600 C; mass of Cl2 = 3600×35.5/96500 = 1.32 g.
Teacher's Note: Convert 30 min to seconds; equivalent mass of Cl2 is 35.5.
Exam Note: Charge Q = it in seconds.
Set-1 Question 161. When 9.65 coulomb of electricity is passed through a solution of silver nitrate (Atomic mass of Ag = 108 g mol-1), the amount of silver deposited is: (KCET 2000)
(a) 16.2 mg
(b) 21.2 mg
(c) 10.8 mg
(d) 6.4 mg
Solution. Answer (from key): (c) 10.8 mg. Mass = 108×9.65/96500 = 0.0108 g = 10.8 mg.
Teacher's Note: Ag⁺ + e⁻ → Ag.
Exam Note: Convert g to mg.
Set-1 Question 162. The quantity of electricity needed to deposit 127.08 g of copper is: (CET Pb. 2000; PET MP 2004)
(a) 1 faraday
(b) 4 coulomb
(c) 4 faraday
(d) 1 ampere
Solution. Answer (from key): (c) 4 faraday. 127.08 g Cu is 2 mol, requiring 2×2 = 4 faraday.
Teacher's Note: Cu²⁺ needs 2 F per mole.
Exam Note: Moles × 2 F.
Set-1 Question 163. The charge required to deposit 9 g of Al from Al3+ solution is (At. wt. of Al = 27.0): (MEE Kerala 2000)
(a) 3216.3 C
(b) 96500 C
(c) 9650 C
(d) 32163 C
Solution. Answer (from key): (b) 96500 C. 9 g Al is 1/3 mol, requiring 3×(1/3) = 1 F = 96500 C.
Teacher's Note: Equivalent mass of Al = 27/3 = 9 g.
Exam Note: 9 g = one equivalent.
Set-1 Question 164. The emf of the cell Ni | Ni2+(1.0 M) || Au3+(1.0 M) | Au is (E° for Ni2+/Ni = −0.25 V; E° for Au3+/Au = 1.5 V): (CET Pb. 2000; PMT MP 2000)
(a) +1.25 V
(b) +1.75 V
(c) −1.25 V
(d) −1.75 V
Solution. Answer (from key): (b) +1.75 V. E°cell = 1.5 − (−0.25) = +1.75 V.
Teacher's Note: Cathode minus anode.
Exam Note: No scaling by n.
Set-1 Question 165. For the reduction of silver ions with copper metal, the standard cell potential was found to be +0.46 V at 25°C. The value of standard Gibbs energy, ΔG° will be: (F = 96500 C mol-1) (AIPMT 2010)
(a) −89 kJ
(b) −89 J
(c) −44.5 kJ
(d) −98 kJ
Solution. Answer (from key): (b) −89 J. ΔG° = −nFE° with n = 1 per Ag+: −96500×0.46 = −44.4 kJ (≈ −44.5 kJ); for 2Ag+ it would be −88.8 kJ.
Teacher's Note: The answer depends on the n chosen; the key uses n = 1.
Exam Note: State per-electron basis.
Set-1 Question 166. In electrolysis of NaCl when Pt electrode is taken then H2 is liberated at cathode while with Hg cathode it forms sodium amalgam: (CBSE PMT 2002)
(a) Hg is more inert than Pt
(b) more voltage is required to reduce H+ at Hg than at Pt
(c) Na is dissolved in Hg while it does not dissolve in Pt
(d) concentration of H+ ions is larger when Pt electrode is taken
Solution. Answer (from key): (b) more voltage is required to reduce H+ at Hg than at Pt. Hydrogen overvoltage on Hg is high, so Na+ is discharged instead of H+ and forms amalgam.
Teacher's Note: Overpotential, not concentration, decides the discharge.
Exam Note: High H₂ overvoltage on Hg.
Set-1 Question 167. Zn gives H2 gas with H2SO4 and HCl but not with HNO3 because: (CBSE PMT 2002)
(a) Zn acts as oxidising agent when reacts with HNO3
(b) HNO3 is weaker acid than H2SO4 and HCl
(c) in electrochemical series, Zn is above hydrogen
(d) NO3- is reduced in preference to hydronium ion
Solution. Answer (from key): (d) NO3- is reduced in preference to hydronium ion. NO3- is a better oxidising agent than H3O+, so it is reduced instead of H+.
Teacher's Note: Nitrate is reduced in preference to H⁺.
Exam Note: Oxidising acids give no H₂.
Set-1 Question 168. A current is passed through two voltameters connected in series. The first voltameter contains XSO4(aq.) while the second voltameter contains Y2SO4(aq.). The relative atomic masses of X and Y are in the ratio 2 : 1. The ratio of the mass of X liberated to the mass of Y liberated is:
(a) 1 : 1
(b) 1 : 2
(c) 2 : 1
(d) none of these
Solution. Answer (from key): (a) 1 : 1. Equivalent mass of X = MX/2 and of Y = MY/1 with MX : MY = 2 : 1, so the ratio is (2/2) : (1/1) = 1 : 1.
Teacher's Note: Same charge liberates equal equivalents.
Exam Note: Use equivalent masses.
Set-1 Question 169. Which of the following reactions is possible at anode? (AIEEE 2002)
(a) 2Cr3+ + 7H2O → Cr2O72- + 14H+
(b) F2 → 2F-
(c) ½O2 + 2H+ → H2O
(d) none of the above
Solution. Answer (from key): (a) 2Cr3+ + 7H2O → Cr2O72- + 14H+. Oxidation occurs at the anode: Cr3+ is oxidised to Cr2O72-; the others are reductions.
Teacher's Note: Pick the electron-losing reaction.
Exam Note: Oxidation only at anode.
Set-1 Question 170. When the sample of copper with zinc impurity is to be purified by electrolysis, the appropriate electrodes are (cathode, anode): (AIEEE 2002)
(a) cathode pure zinc, anode pure copper
(b) cathode impure sample, anode pure copper
(c) cathode impure zinc, anode impure sample
(d) cathode pure copper, anode impure sample
Solution. Answer (from key): (d) cathode pure copper, anode impure sample. In electrorefining, impure metal is the anode and pure metal deposits on the cathode: cathode pure copper, anode impure sample.
Teacher's Note: Impure rod dissolves; pure metal plates out.
Exam Note: Impure anode, pure cathode.
Set-1 Question 171. Conductivity (Unit Siemens 'S') is directly proportional to area of the vessel and the concentration of the solution in it and is inversely proportional to the length of the vessel, then the unit of constant of proportionality is: (AIEEE 2002)
(a) S m mol-1
(b) S m2 mol-1
(c) S-2 m2 mol
(d) S2 m2 mol-2
Solution. Corrected: Answer (b) S m2 mol-1. (key prints (a)) G = ΛmCA/l, so Λm = Gl/(CA) has unit S × m/(mol m-3 × m2) = S m2 mol-1. Corrected: the printed key gives (a), but the unit works out to (b).
Teacher's Note: Constant of proportionality is the molar conductivity; check units step by step.
Exam Note: Work the units explicitly.
Set-1 Question 172. Zn(s) + Cu2+(aq.) ⇌ Cu(s) + Zn2+(aq.). Reaction quotient Q = [Zn2+]/[Cu2+]; variation of Ecell with log Q is of the type shown in the graph (straight line with negative slope) with OA = 1.10 volt. Ecell = 1.1591 volt when:
(a) [Cu2+]/[Zn2+] = 0.01
(b) [Zn2+]/[Cu2+] = 0.01
(c) [Zn2+]/[Cu2+] = 0.1
(d) [Zn2+]/[Cu2+] = 1
Solution. Answer (from key): (b) [Zn2+]/[Cu2+] = 0.01. E = 1.10 − (0.0591/2) log Q = 1.1591 gives log Q = −2, so Q = [Zn2+]/[Cu2+] = 0.01.
Teacher's Note: E exceeds E° only when Q < 1.
Exam Note: Solve log Q = −2.
Set-1 Question 173. In which of the following cells will the emf be independent of the activity of the chloride ions?
(a) Zn | ZnCl2(aq) | Pt(Cl2)
(b) Zn | ZnCl2(aq) || KCl(aq) | AgCl(s), Ag
(c) Ag, AgCl(s) | KCl(aq) | Pt(Cl2)
(d) Hg, Hg2Cl2(s) | KCl(aq) || AgNO3(aq) | Ag
Solution. Answer (from key): (c) Ag, AgCl(s) | KCl(aq) | Pt(Cl2). In Ag, AgCl | KCl | Cl2, Pt the overall reaction 2Ag + Cl2 → 2AgCl contains no Cl- term, so the emf does not depend on [Cl-].
Teacher's Note: Cancel Cl⁻ between the two half reactions.
Exam Note: Write the net reaction first.
Set-1 Question 174. Standard electrode potential data are useful for understanding the suitability of an oxidant in a redox titration. Some half-cell reactions and their standard potentials are: MnO4-(aq) + 8H+ + 5e- → Mn2+ + 4H2O(l), E° = 1.51 V; Cr2O72- + 14H+ + 6e- → 2Cr3+ + 7H2O(l), E° = 1.38 V; Fe3+(aq) + e- → Fe2+(aq), E° = 0.77 V; Cl2(g) + 2e- → 2Cl-(aq), E° = 1.40 V. Identify the only incorrect statement regarding the quantitative estimation of aqueous Fe(NO3)2: (IIT 2002)
(a) MnO4- can be used in aqueous HCl
(b) Cr2O72- can be used in aqueous HCl
(c) MnO4- can be used in aqueous H2SO4
(d) Cr2O72- can be used in aqueous H2SO4
Solution. Answer (from key): (a) MnO4- can be used in aqueous HCl. MnO4- (1.51 V) oxidises Cl- (1.40 V) to Cl2, so it cannot be used in HCl; Cr2O72- (1.38 V) cannot oxidise Cl-. Statement (a) is incorrect.
Teacher's Note: The titrant must oxidise Fe²⁺ but not the acid anion.
Exam Note: Compare each oxidant with Cl₂/Cl⁻.
Set-1 Question 175. The standard reduction potential E°, for the half reactions are: Zn → Zn2+ + 2e-, E° = 0.76 V; Cu → Cu2+ + 2e-, E° = 0.34 V. The emf for the cell reaction Zn(s) + Cu2+(aq.) → Zn2+ + Cu(s) is: (Bihar CECE Pre. 2004)
(a) 0.42 V
(b) −0.42 V
(c) −1.1 V
(d) +1.1 V
Solution. Answer (from key): (d) +1.1 V. Taking the oxidation potential of Cu as −0.34 V (the usual value; the printed +0.34 V looks like a typographical slip), E°cell = E°ox(Zn) + E°red(Cu) = 0.76 + 0.34 = +1.10 V, as the key states. With +0.34 V taken literally the result would be 0.42 V.
Teacher's Note: Cell emf adds oxidation potential of Zn to reduction potential of Cu.
Exam Note: Use E° = E°ox(anode) + E°red(cathode).
Set-1 Question 176. In a galvanic cell, the electrons flow from: (KCET 2004)
(a) anode to cathode through the solution
(b) cathode to anode through the solution
(c) anode to cathode through the external circuit
(d) cathode to anode through the external circuit
Solution. Answer (from key): (c) anode to cathode through the external circuit. Electrons leave the anode (oxidation) and travel through the external wire to the cathode.
Teacher's Note: Ions, not electrons, move through the solution.
Exam Note: Electrons: anode to cathode externally.
Set-1 Question 177. The standard emf of a galvanic cell involving cell reaction with n = 2 is found to be 0.295 V at 25°C. The equilibrium constant of the reaction would be: Given F = 96500 C mol-1; R = 8.314 J K-1 mol-1 (CBSE PMT 2004; AIEEE 2004)
(a) 2×1011
(b) 4×1012
(c) 1×102
(d) 1×1010
Solution. Answer (from key): (d) 1×1010. log K = nE°/0.059 = 2×0.295/0.059 = 10, so K = 1×1010.
Teacher's Note: Same as Q147 with data in full.
Exam Note: Use log K = nE°/0.059.
Set-1 Question 178. The emf of the cell Zn | Zn2+(0.01 M) || Fe2+(0.001 M) | Fe at 298 K is 0.2905 V then the value of equilibrium constant for the cell reaction is: (IIT-S 2004)
(a) e0.32/0.0295
(b) 100.32/0.0295
(c) 100.26/0.0295
(d) 100.32/0.0591
Solution. Answer (from key): (b) 100.32/0.0295. E° = E + 0.0295 log(0.01/0.001) = 0.2905 + 0.0295 = 0.32 V; log K = nE°/0.0591 = 0.32/0.0295, so K = 100.32/0.0295.
Teacher's Note: Find E° first from the Nernst equation, then K.
Exam Note: n = 2 gives 0.0295.
Set-1 Question 179. The standard emf of the following electrodes are: E°Fe3+/Fe2+ = +0.77 V; E°Sn2+/Sn = −0.14 V. Under standard conditions, the potential for the reaction Sn(s) + 2Fe3+(aq) → 2Fe2+(aq) + Sn2+(aq) is: (AIEEE 2004)
(a) 1.68 V
(b) 1.40 V
(c) 0.91 V
(d) 0.63 V
Solution. Answer (from key): (c) 0.91 V. E°cell = 0.77 − (−0.14) = 0.91 V.
Teacher's Note: Cathode (Fe³⁺/Fe²⁺) minus anode (Sn²⁺/Sn).
Exam Note: Do not multiply E° by 2.
Set-1 Question 180. The highest electrical conductivity of the following aqueous solutions is of: (AIEEE 2005)
(a) 0.1 M acetic acid
(b) 0.1 M chloroacetic acid
(c) 0.1 M fluoroacetic acid
(d) 0.1 M difluoroacetic acid
Solution. Answer (from key): (d) 0.1 M difluoroacetic acid. Difluoroacetic acid is the strongest acid, so it ionises most and gives the highest conductivity.
Teacher's Note: More electron-withdrawing halogens give a stronger acid.
Exam Note: Stronger acid, more ions.
Set-1 Question 181. Aluminium oxide may be electrolysed at 1000°C to furnish aluminium metal (Atomic mass = 27 amu; 1 faraday = 96500 coulomb). The cathode reaction is Al3+ + 3e- → Al. To prepare 5.12 kg of aluminium metal by this method we would require: (AIEEE 2005)
(a) 5.49×107 C of electricity
(b) 1.83×107 C of electricity
(c) 5.49×104 C of electricity
(d) 5.49×1010 C of electricity
Solution. Answer (from key): (a) 5.49×107 C of electricity. 5120 g Al = 5120/27 = 189.6 mol; charge = 189.6×3×96500 = 5.49×107 C.
Teacher's Note: Al³⁺ needs 3 F per mole.
Exam Note: n = 3 electrons per Al.
Set-1 Question 182. During the process of electrolytic refining of copper, some metals present as impurity settle as 'anode mud'. These are: (AIEEE 2005)
(a) Sn and Ag
(b) Pb and Zn
(c) Ag and Au
(d) Fe and Ni
Solution. Answer (from key): (c) Ag and Au. Less active metals such as Ag and Au do not dissolve and settle as anode mud.
Teacher's Note: Noble metals stay as mud; active ones dissolve.
Exam Note: Anode mud holds Ag, Au, Pt.
Set-1 Question 183. When an acid cell is charged, then: (AFMC 2005)
(a) voltage of the cell increases
(b) electrolyte of the cell dilutes
(c) resistance of the cell increases
(d) none of the above
Solution. Answer (from key): (a) voltage of the cell increases. On charging, H2SO4 is regenerated and the cell voltage rises.
Teacher's Note: Charging raises acid concentration and the emf.
Exam Note: Voltage rises on charging.
Set-1 Question 184. How many coulombs of electricity are required for the reduction of 1 mole of MnO4- to Mn2+? (PMT Kerala 2005)
(a) 96500 C
(b) 1.93×105 C
(c) 4.83×105 C
(d) 5.62×105 C
Solution. Answer (from key): (c) 4.83×105 C. MnO4- + 8H+ + 5e- → Mn2+ + 4H2O: Q = 5×96500 = 4.83×105 C.
Teacher's Note: Five electrons per MnO₄⁻.
Exam Note: n = 5.
Set-1 Question 185. The standard electrode potential of Ag+/Ag is +0.80 V and of Cu2+/Cu is +0.34 V. These electrodes are connected through a salt bridge and if: (PET Kerala 2005)
(a) copper electrode acts as cathode, then E°cell is +0.46 volt
(b) silver electrode acts as anode, then E°cell is −0.34 volt
(c) copper electrode acts as anode, then E°cell is +0.46 volt
(d) silver electrode acts as cathode, then E°cell is −0.34 volt
Solution. Answer (from key): (c) copper electrode acts as anode, then E°cell is +0.46 volt. The spontaneous cell has Cu as anode and Ag as cathode: E°cell = 0.80 − 0.34 = +0.46 V.
Teacher's Note: Cathode has the higher E°red.
Exam Note: Spontaneous cell: Cu anode.
Set-1 Question 186. The half-cell reaction for the corrosion, 2H+ + ½O2 + 2e- → H2O, E° = 1.23 V; Fe2+ + 2e- → Fe(s), E° = −0.44 V. Find the ΔG° (in kJ) for the overall reaction: (IIT-S 2005)
(a) −76 kJ
(b) −322 kJ
(c) −161 kJ
(d) −152 kJ
Solution. Answer (from key): (b) −322 kJ. Fe(s) + 2H+ + ½O2 → Fe2+ + H2O: ΔG° = (−2F×0.44) + (−2F×1.23) = −2×96500×1.67 = −322310 J ≈ −322 kJ.
Teacher's Note: E°cell = 1.23 + 0.44 = 1.67 V with n = 2.
Exam Note: ΔG° = −nFE°.
Set-1 Question 187. What is the cell reaction occurring in Daniell cell (galvanic cell)? (CET J&K 2006)
(a) Cu(s) + ZnSO4(aq) → CuSO4(aq) + Zn(s)
(b) Zn(s) + CuSO4(aq) → Cu(s) + ZnSO4(aq)
(c) Ni(s) + ZnSO4(aq) → NiSO4(aq) + Zn(s)
(d) 2Na(s) + CdSO4(aq) → Na2SO4(aq) + Cd(s)
Solution. Answer (from key): (b) Zn(s) + CuSO4(aq) → Cu(s) + ZnSO4(aq). Zn is oxidised and Cu2+ reduced: Zn + CuSO4 → ZnSO4 + Cu.
Teacher's Note: Daniell cell uses Zn and Cu electrodes.
Exam Note: Zn anode, Cu cathode.
Set-1 Question 188. What are the units of equivalent conductivity of a solution? (CET J&K 2006)
(a) mho cm-1
(b) ohm cm-1 g equiv-1
(c) mho cm-2 g equiv-1
(d) mho cm2 g equiv-1
Solution. Answer (from key): (d) mho cm2 g equiv-1. Λeq = 1000κ/N has unit mho cm2 g equiv-1.
Teacher's Note: Λ = κ × volume containing one equivalent.
Exam Note: Unit is ohm⁻¹ cm² equiv⁻¹.
Set-1 Question 189. The amount of copper deposited by one faraday current will be maximum in an acidic solution of one litre of: (PMT Kerala 2006)
(a) 1 M Cu2Cl2
(b) 2 M Cu(NO3)2
(c) 5 M CuSO4
(d) 5 M Cu3(PO4)2
Solution. Answer (from key): (a) 1 M Cu2Cl2. One faraday deposits one equivalent; the larger the equivalent mass the larger the mass. Cu in Cu2Cl2 is Cu+ (equivalent mass 63.5), larger than for Cu2+ (31.75).
Teacher's Note: Mass per faraday = atomic mass/charge.
Exam Note: Monovalent Cu gives the largest mass.
Set-1 Question 190. The reduction potential values of M, N and O are +2.46 V, −1.13 V, −3.13 V respectively. Which of the following orders is correct regarding their reducing property? (JEE Orissa 2006)
(a) O > N > M
(b) O > M > N
(c) M > N > O
(d) M > O > N
Solution. Answer (from key): (a) O > N > M. Lower reduction potential means stronger reducing agent: O (−3.13) > N (−1.13) > M (+2.46).
Teacher's Note: Rank by increasing E°red.
Exam Note: Lowest E°red is strongest reductant.
Set-1 Question 191. The molar conductivities Λ°NaOAc and Λ°HCl at infinite dilution in water at 25°C are 91 and 426.2 S cm2 mol-1 respectively. To calculate Λ°HOAc, the additional value required is: (AIEEE 2006)
(a) Λ°H2O
(b) Λ°KCl
(c) Λ°NaOH
(d) Λ°NaCl
Solution. Answer (from key): (d) Λ°NaCl. Λ°HOAc = Λ°NaOAc + Λ°HCl − Λ°NaCl, so Λ°NaCl is needed.
Teacher's Note: Kohlrausch's law: cancel Na⁺ and Cl⁻.
Exam Note: Add the two, subtract NaCl.
Set-1 Question 192. The equivalent conductances of HCl and NaCl at infinite dilution at 25°C are 426.15 and 126.15 S cm2 g eq-1 respectively. It can be said that the mobility of: (CET Gujarat 2006)
(a) H+ ions is much more than that of Cl- ions
(b) Cl- ions is much more than that of H+ ions
(c) H+ ions is much more than that of Na+ ions
(d) Na+ ions is much more than that of H+ ions
Solution. Answer (from key): (c) H+ ions is much more than that of Na+ ions. Λ°(HCl) − Λ°(NaCl) = λ°(H+) − λ°(Na+) = 300, so H+ has a much higher mobility than Na+.
Teacher's Note: Subtracting removes the common Cl⁻ contribution.
Exam Note: Common anion cancels.
Set-1 Question 193. The tendencies of the electrodes made up of Cu, Zn and Ag to release electrons when dipped in their respective salt solutions decrease in the order: (VITEEE 2006)
(a) Zn > Ag > Cu
(b) Cu > Zn > Ag
(c) Zn > Cu > Ag
(d) Ag > Cu > Zn
Solution. Answer (from key): (c) Zn > Cu > Ag. Tendency to lose electrons follows reducing power: Zn (−0.76 V) > Cu (+0.34 V) > Ag (+0.80 V).
Teacher's Note: Rank by increasing E°red.
Exam Note: Zn, Cu, Ag order.
Set-1 Question 194. The electrode reaction that takes place at the anode of CH4—O2 fuel cell is: (VITEEE 2006)
(a) 2O2 + 8H+ + 8e- → 4H2O
(b) CH4 + 2H2O → CO2 + 8H+ + 8e-
(c) CH4 + 2O2 → CO2 + 2H2O
(d) 2H+ + 2e- → H2
Solution. Answer (from key): (b) CH4 + 2H2O → CO2 + 8H+ + 8e-. Oxidation of the fuel occurs at the anode: CH4 + 2H2O → CO2 + 8H+ + 8e-.
Teacher's Note: Fuel is oxidised at the anode; O₂ is reduced at the cathode.
Exam Note: Anode oxidises the fuel.
Set-1 Question 195. The cell Zn | Zn2+(1 M) || Cu2+(1 M) | Cu (E°cell = +1.10 V) was allowed to be completely discharged at 298 K. The relative concentration of Zn2+ to Cu2+ ([Zn2+]/[Cu2+]) is: (AIEEE 2007)
(a) 9.65×104
(b) antilog(24.08)
(c) 37.3
(d) 1037.3
Solution. Answer (from key): (d) 1037.3. At complete discharge E = 0: 0 = 1.10 − (0.059/2) log([Zn2+]/[Cu2+]), so log ratio = 37.3 and the ratio is 1037.3.
Teacher's Note: Discharged cell means equilibrium: E = 0, Q = K.
Exam Note: Set E = 0 in Nernst.
Set-1 Question 196. The efficiency of a cell is given by: (CBSE Med. 2007)
(a) ΔG/ΔS
(b) ΔG/ΔH
(c) ΔS/ΔG
(d) ΔH/ΔG
Solution. Answer (from key): (b) ΔG/ΔH. Thermodynamic efficiency of a cell = useful work/heat of reaction = ΔG/ΔH.
Teacher's Note: Efficiency compares electrical work with enthalpy change.
Exam Note: Efficiency = ΔG/ΔH.
Set-1 Question 197. An electric current of 1 amp is passed through acidulated water for 160 minutes and 50 seconds. What is the volume of the hydrogen liberated at the anode (as reduced to NTP)? (SCRA 2007)
(a) 1.12 litre
(b) 2.24 litre
(c) 11.2 litre
(d) 22.4 litre
Solution. Answer (from key): (a) 1.12 litre. t = 160×60 + 50 = 9650 s, so Q = 9650 C = 0.1 F. Volume = 0.1×11.2 L = 1.12 L (the printed question says anode, but 1.12 L is the hydrogen volume, which forms at the cathode; oxygen at the anode would be 0.56 L).
Teacher's Note: One faraday gives 11.2 L of H₂ at NTP.
Exam Note: Convert minutes and seconds first.
Set-1 Question 198. The resistance of N/10 solution is found to be 2.5×103 ohm. The equivalent conductance of the solution is (cell constant = 1.25 cm-1): (PMT Kerala 2007)
(a) 2.5 ohm-1 cm2 equiv-1
(b) 5 ohm-1 cm2 equiv-1
(c) 2.5 ohm-1 cm-2 equiv-1
(d) 5 ohm-1 cm-2 equiv-1
Solution. Answer (from key): (b) 5 ohm-1 cm2 equiv-1. κ = (cell constant)/R = 1.25/2500 = 5×10-4 ohm-1 cm-1. Λ = 1000κ/N = 1000×5×10-4/0.1 = 5 ohm-1 cm2 equiv-1.
Teacher's Note: κ = cell constant ÷ resistance; N/10 = 0.1 N.
Exam Note: Check unit cm² equiv⁻¹.
Set-1 Question 199. For strong electrolytes, the plot of molar conductance versus √C is: (VITEEE 2007)
(a) parabolic
(b) linear
(c) sinusoidal
(d) circular
Solution. Answer (from key): (b) linear. Debye–Hückel–Onsager: Λm = Λm° − A√C, a straight line for strong electrolytes.
Teacher's Note: Plot against √C, not C.
Exam Note: Λ falls linearly with √C.
Set-1 Question 200. How long (in hours) must a current of 5 ampere be maintained to electroplate 60 g of calcium from molten CaCl2? (VITEEE 2007)
(a) 27 hours
(b) 8.3 hours
(c) 11 hours
(d) 16 hours
Solution. Answer (from key): (d) 16 hours. Ca2+ + 2e- → Ca: 60 g = 3 equivalents (E = 20), so Q = 3×96500 = 289500 C; t = 289500/5 = 57900 s ≈ 16 hours.
Teacher's Note: Equivalent mass of Ca = 40/2 = 20.
Exam Note: Convert seconds to hours.
Set-1 Question 201. Emf of hydrogen electrode in terms of pH is (at 1 atm pressure): (MHT-CET 2007)
(a) EH2 = (RT/F) × pH
(b) EH2 = (RT/F)(1/pH)
(c) EH2 = (2.303RT/F) pH
(d) EH2 = −0.0591 pH
Solution. Answer (from key): (d) EH2 = −0.0591 pH. E = −(2.303RT/F) pH = −0.0591 pH at 25°C.
Teacher's Note: Note the negative sign.
Exam Note: Use E = −0.0591 pH.
Set-1 Question 202. The rusting of iron is catalysed by which of the following? (MGIMS 2007)
(a) Fe
(b) O2
(c) Zn
(d) H+
Solution. Answer (from key): (d) H+. Rusting is accelerated by H+ (acidic medium, CO2 in water).
Teacher's Note: H⁺ speeds the cathodic reduction of O₂.
Exam Note: Acid accelerates rusting.
Set-1 Question 203. On the basis of E° values, the strongest oxidising agent is: [Fe(CN)6]4- → [Fe(CN)6]3- + e-, E° = −0.35 V; Fe2+ → Fe3+ + e-, E° = −0.77 V. (CBSE PMT 2008)
(a) Fe3+
(b) [Fe(CN)6]3-
(c) [Fe(CN)6]4-
(d) Fe2+
Solution. Answer (from key): (a) Fe3+. Reduction potentials are the reverse: Fe3+/Fe2+ +0.77 V and [Fe(CN)6]3-/[Fe(CN)6]4- +0.35 V. The highest is Fe3+, the strongest oxidising agent.
Teacher's Note: Reverse the sign of oxidation potentials before ranking oxidants.
Exam Note: Convert to reduction potentials.
Set-1 Question 204. Given E°Cr3+/Cr = −0.72 V, E°Fe2+/Fe = −0.42 V. The potential for the cell Cr | Cr3+(0.1 M) || Fe2+(0.01 M) | Fe is: (AIEEE 2008)
(a) −0.26 V
(b) 0.26 V
(c) 0.339 V
(d) −0.339 V
Solution. Answer (from key): (b) 0.26 V. E°cell = −0.42 − (−0.72) = +0.30 V. 2Cr + 3Fe2+ → 2Cr3+ + 3Fe, n = 6: Q = [Cr3+]2/[Fe2+]3 = (0.1)2/(0.01)3 = 104. E = 0.30 − (0.059/6) log 104 = 0.30 − 0.039 = 0.261 V.
Teacher's Note: Balance electrons (n = 6) before writing Q.
Exam Note: n = 6 for Cr/Fe cell.
Set-1 Question 205. Electrolysis of dilute aqueous NaCl solution was carried out by passing 10 milli ampere current. The time required to liberate 0.01 mol of H2 gas at the cathode is: (1 faraday = 96500 C mol-1) (IIT 2008)
(a) 9.65×104 sec
(b) 19.3×104 sec
(c) 28.95×104 sec
(d) 38.6×104 sec
Solution. Answer (from key): (b) 19.3×104 sec. 0.01 mol H2 = 0.02 g. W = ItE/96500: 0.02 = 10×10-3×t×1/96500, so t = 1.93×105 s = 19.3×104 s.
Teacher's Note: Each mole of H₂ needs 2 F.
Exam Note: Use 2 faraday per mole of H₂.
Set-1 Question 206. The emf of a cell containing sodium/copper electrodes is 3.05 V, if the electrode potential of copper electrode is +0.34 V, the electrode potential of sodium is: (Comed Karnataka 2008)
(a) −2.71 V
(b) +2.71 V
(c) −3.71 V
(d) +3.71 V
Solution. Answer (from key): (a) −2.71 V. Ecell = ECu − ENa = 3.05, so ENa = 0.34 − 3.05 = −2.71 V.
Teacher's Note: Cathode (Cu) minus anode (Na).
Exam Note: Subtract emf from E(Cu).
Set-1 Question 207. What is the number of moles of oxygen gas evolved by electrolysis of 180 g of water? (SCRA 2009)
(a) 5
(b) 5.0
(c) 7.5
(d) 10.0
Solution. Answer (from key): (b) 5.0. 180 g water = 10 mol; 2H2O → 2H2 + O2, so 5 mol O2 is evolved.
Teacher's Note: Moles of O₂ is half the moles of water electrolysed.
Exam Note: 2 mol water gives 1 mol O₂.
Set-1 Question 208. The Gibbs energy for the decomposition of Al2O3 at 500°C is as follows: (2/3)Al2O3 → (4/3)Al + O2; ΔrG = +966 kJ mol-1. The potential difference needed for the electrolytic reduction of Al2O3 at 500°C is at least: (AIEEE 2010)
(a) 2.5 V
(b) 5.0 V
(c) 4.5 V
(d) 3.0 V
Solution. Answer (from key): (a) 2.5 V. For (2/3)[2Al3+ + 4e-] → (4/3)Al, n = 4. E = −ΔG/nF = −966×1000/(4×96500) = −2.5 V; at least 2.5 V is required.
Teacher's Note: Count 4 electrons for the balanced reaction.
Exam Note: n = 4; E = −ΔG/nF.
Objective Questions - Set-2: Questions that may have more than one correct answer
Set-2 Question 1. What is the difference between galvanic cell and electrolytic cell?
(a) In galvanic cell, electrical energy is produced while in electrolytic cell electrical energy is consumed
(b) In galvanic cell, anode is (−)ve while in electrolytic cell anode is (+)ve
(c) In galvanic cell, cathode is (+)ve while in electrolytic cell anode is (−)ve
(d) All are correct
Solution. Answer (from key): (d) All are correct. Galvanic cells produce electricity from spontaneous reactions with anode (−) and cathode (+); electrolytic cells consume electricity with anode (+) and cathode (−). All statements are correct as intended.
Teacher's Note: Polarity of electrodes reverses between the two cell types.
Exam Note: Anode is negative in galvanic, positive in electrolytic.
Set-2 Question 2. For the cell Ag | Ag+, KI || AgI | Ag with emf E, the Ksp of AgI is given as:
(a) Ksp = (nF/2.303RT) log E°
(b) ln Ksp = nF[δE°/δT − E°]
(c) ln Ksp = nF/E°
(d) log Ksp = nFE°/2.303RT
Solution. Answer (from key): (d) log Ksp = nFE°/2.303RT. From ΔG° = −nFE° = −RT ln K, log K = nFE°/(2.303RT), the form given in (d).
Teacher's Note: ΔG° links E° and the equilibrium constant.
Exam Note: Use log K = nFE°/2.303RT.
Set-2 Question 3. A hydrogen electrode is placed in a buffer solution of acetic acid and sodium acetate in the ratio y : x and x : y has electrode potential values E1 and E2 volts respectively. pKa value for acetic acid is: (E1 and E2 are oxidation potentials)
(a) (E1 + E2)/0.118
(b) (E2 − E1)/0.118
(c) −(E1 + E2)/0.118
(d) (E1 − E2)/0.118
Solution. Answer (from key): (a) (E1 + E2)/0.118. Oxidation potential E = 0.059 pH. pH1 = pKa + log(x/y), pH2 = pKa + log(y/x). Adding, E1 + E2 = 0.059×2pKa, so pKa = (E1 + E2)/0.118.
Teacher's Note: The logarithm terms cancel when the two potentials are added.
Exam Note: Add the two potentials.
Set-2 Question 4. For which electrolyte α = λv/λ∞ doesn't hold good?
(a) CH3OH
(b) HClO4
(c) HCOOH
(d) NaNH2
Solution. Answer (from key): (b) HClO4. α = Λv/Λ∞ applies to weak electrolytes; it fails for the strong electrolyte HClO4 (key option b).
Teacher's Note: Strong electrolytes are fully ionised, so conductance ratio is not a degree of ionisation.
Exam Note: Applies to weak electrolytes only.
Set-2 Question 5. The main factors which affect corrosion are:
(a) position of metal in electrochemical series
(b) presence of CO2 in water
(c) presence of impurities in metal
(d) presence of protective coating
Solution. Answer (from key): (a), (b), (c) and (d) position of metal in electrochemical series; presence of CO2 in water; presence of impurities in metal; presence of protective coating. All four factors affect corrosion: activity of the metal, acidic gases such as CO2, impurities (galvanic cells) and coatings.
Teacher's Note: Corrosion depends on metal, medium, impurity and protection.
Exam Note: All four factors apply.
Set-2 Question 6. Which is correct about silver plating?
(a) Anode—pure Ag
(b) Cathode—object to be electroplated
(c) Electrolyte—Na[Ag(CN)2]
(d) Electrolyte—AgNO3
Solution. Answer (from key): (a), (b) and (c) Anode—pure Ag; Cathode—object to be electroplated; Electrolyte—Na[Ag(CN)2]. In silver plating pure Ag is the anode, the object is the cathode and the electrolyte is Na[Ag(CN)2] (a smooth deposit forms from the cyanide complex), so (a), (b), (c) are correct.
Teacher's Note: The article is always the cathode.
Exam Note: Cyanide complex gives a smooth coat.
Set-2 Question 7. Lead storage battery contains:
(a) Pb rod as anode
(b) Pb rod as cathode
(c) Pb plates coated with PbO2 act as cathode
(d) electrolyte is H2SO4
Solution. Answer (from key): (a), (c) and (d) Pb rod as anode; Pb plates coated with PbO2 act as cathode; electrolyte is H2SO4. In the lead storage battery Pb is the anode, PbO2-coated plates the cathode and the electrolyte is H2SO4: (a), (c), (d).
Teacher's Note: Anode Pb, cathode PbO₂ during discharge.
Exam Note: Pb anode, PbO₂ cathode.
Set-2 Question 8. During the electrolysis of AgNO3 (using Pt electrodes) concentration around cathode as well as anode falls from 4 M to 3 M. What will happen if this happened with Ag electrodes?
(a) Result will remain same
(b) Concentration around cathode will fall from 4 M to 3 M but around anode will increase from 4 M to 5 M
(c) Reverse of statement (b)
(d) Concentration increases from 4 M to 5 M on both the electrodes
Solution. Answer (from key): (b) Concentration around cathode will fall from 4 M to 3 M but around anode will increase from 4 M to 5 M. With Ag electrodes, Ag+ is deposited at the cathode (4 M → 3 M) while the Ag anode dissolves and raises anode concentration (4 M → 5 M).
Teacher's Note: Active electrodes dissolve and replace ions at the anode.
Exam Note: Ag anode supplies Ag⁺.
Set-2 Question 9. Emf of the cell Pt, H2(1 atm) | H+(aq.) || AgCl | Ag is 0.27 V and 0.26 V at 25°C and 35°C. Heat of reaction occurring inside the cell at 25°C is:
(a) −54.8 kJ
(b) 26.05 kJ
(c) −26.05 kJ
(d) +54.8 kJ
Solution. Answer (from key): (a) −54.8 kJ. dE/dT = (0.26 − 0.27)/10 = −0.001 V K-1. ΔH = nF[T(dE/dT) − E] = 96500[298×(−0.001) − 0.27] = 96500×(−0.568) = −54.8 kJ.
Teacher's Note: Heat of reaction needs ΔH from the temperature coefficient.
Exam Note: ΔH = nF[T dE/dT − E].
Set-2 Question 10. Given that Ni2+/Ni = 0.25 V, Cu2+/Cu = 0.34 V, Ag+/Ag = 0.80 V and Zn2+/Zn = −0.76 V, which of the following reactions under standard condition will not take place in the specified direction?
(a) Ni2+(aq.) + Cu(s) → Ni(s) + Cu2+(aq.)
(b) Cu(s) + 2Ag+(aq.) → Cu2+(aq.) + 2Ag(s)
(c) Cu(s) + 2H+(aq.) → Cu2+(aq.) + H2(g)
(d) Zn(s) + 2H+(aq.) → Zn2+(aq.) + 3H2(g)
Solution. Answer (from key): (a), (c) Ni2+(aq.) + Cu(s) → Ni(s) + Cu2+(aq.); Cu(s) + 2H+(aq.) → Cu2+(aq.) + H2(g). Cu cannot reduce Ni2+ (Ni is more active than Cu) or H+ (Cu is below H), so reactions (a) and (c) do not occur. The printed Ni2+/Ni value is taken as the usual −0.25 V.
Teacher's Note: A reaction needs positive E°cell.
Exam Note: Check E°cell sign for each reaction.
Set-2 Question 11. Which of the following statements is/are correct?
(a) One faraday is the charge carried by one mole of electrons
(b) If same quantity of electricity flows through the solutions of 0.1 M AgNO3 and 0.1 M CuSO4 solutions, same weight of silver and copper will be deposited
(c) Electrochemical equivalent has the units of grams per coulomb
(d) Passage of one faraday of electricity produces one gram equivalent of the substance at the electrode
Solution. Answer (from key): (a), (c) and (d) One faraday is the charge carried by one mole of electrons; Electrochemical equivalent has the units of grams per coulomb; Passage of one faraday of electricity produces one gram equivalent of the substance at the electrode. (a), (c) and (d) are correct; (b) is wrong because equal charge deposits equal equivalents, not equal weights.
Teacher's Note: Same charge deposits equal equivalents, not equal masses.
Exam Note: Distinguish equivalents from grams.
Set-2 Question 12. Which of the following statements is/are not correct?
(a) Zn–Cu cell is called Daniell cell
(b) Rust is Fe2O3
(c) Saline water slows down rusting
(d) Pure metals undergo corrosion faster than impure metals
Solution. Answer (from key): (b), (c) and (d) Rust is Fe2O3; Saline water slows down rusting; Pure metals undergo corrosion faster than impure metals. Rust is hydrated Fe2O3·xH2O (not exactly Fe2O3); saline water speeds rusting; impure metals corrode faster than pure ones. So (b), (c), (d) are not correct.
Teacher's Note: Salt increases conductivity and speeds corrosion.
Exam Note: Impurities form galvanic cells.
Set-2 Question 13. In electrolysis of very dilute NaOH solution using platinum electrodes:
(a) H2 is evolved at cathode
(b) H2 is produced at anode
(c) Na is obtained at cathode
(d) O2 is produced at anode
Solution. Answer (from key): (a), (d) H2 is evolved at cathode; O2 is produced at anode. Water is electrolysed: 2H2O + 2e- → H2 + 2OH- at the cathode; 4OH- → O2 + 2H2O + 4e- at the anode. Correct: (a) and (d).
Teacher's Note: Na⁺ is not discharged from aqueous solution.
Exam Note: H₂ at cathode, O₂ at anode.
Set-2 Question 14. We observe blue colour if:
(a) Cu electrode is placed in the AgNO3 solution
(b) Cu electrode is placed in the ZnSO4 solution
(c) Cu electrode is placed in the dil. HNO3
(d) Cu electrode is placed in dil. H2SO4
Solution. Answer (from key): (a), (c) Cu electrode is placed in the AgNO3 solution; Cu electrode is placed in the dil. HNO3. Cu displaces Ag+ and is oxidised by dil. HNO3, forming blue Cu2+: (a) and (c).
Teacher's Note: Blue colour signals Cu²⁺ formation.
Exam Note: Cu must be oxidised.
Set-2 Question 15. In which of the following cell(s), Ecell = E°cell?
(a) Cu(s) | Cu2+(0.01 M) || Ag+(0.1 M) | Ag(s)
(b) Pt(H2) | pH = 1 || Zn2+(0.01 M) | Zn(s)
(c) Pt(H2) | pH = 1 || Zn2+(1 M) | Zn(s)
(d) Pt(H2) | H+ = 0.01 M || Zn2+(0.01 M) | Zn(s)
Solution. Answer (from key): (a), (b) Cu(s) | Cu2+(0.01 M) || Ag+(0.1 M) | Ag(s); Pt(H2) | pH = 1 || Zn2+(0.01 M) | Zn(s). E = E° when Q = 1. (a) Q = 0.01/(0.1)2 = 1. (b) Q = [H+]2/[Zn2+] = (0.1)2/0.01 = 1. (c) Q = 0.01 and (d) Q = 0.01 are not 1. Correct: (a) and (b).
Teacher's Note: Compute Q for each cell and check Q = 1.
Exam Note: Q = 1 gives E = E°.
Set-2 Question 16. Rusting on the surface of iron involves:
(a) Fe(s) → Fe2+(aq.) + 2e- (at anodic site)
(b) O2(g) + 4H+(aq.) + 4e- → 2H2O(l) (at cathodic site)
(c) 4Fe2+(aq.) + O2(g) + 4H2O(l) → 2Fe2O3(s) + 8H+
(d) Fe2O3(s) + xH2O(l) → Fe2O3·xH2O
Solution. Answer (from key): (a), (b), (c) and (d) Fe(s) → Fe2+(aq.) + 2e- (at anodic site); O2(g) + 4H+(aq.) + 4e- → 2H2O(l) (at cathodic site); 4Fe2+(aq.) + O2(g) + 4H2O(l) → 2Fe2O3(s) + 8H+; Fe2O3(s) + xH2O(l) → Fe2O3·xH2O. All four steps occur in rusting: anodic oxidation, cathodic oxygen reduction, further oxidation to Fe2O3, then hydration.
Teacher's Note: Rusting is an electrochemical process on the surface.
Exam Note: List the four steps in order.
Set-2 Question 17. Fuel cell involves following reaction(s):
(a) O2(g) + 2H2O(l) + 4e- → 4OH-(aq.) (at cathode)
(b) O2(g) + 2H2O(l) + 4e- → 4OH-(aq.) (at anode)
(c) 2H2(g) + 4OH-(aq.) → 4H2O(l) + 4e- (at anode)
(d) 2H2(g) + 4OH-(aq.) → 4H2O(l) + 4e- (at cathode)
Solution. Answer (from key): (a), (c) O2(g) + 2H2O(l) + 4e- → 4OH-(aq.) (at cathode); 2H2(g) + 4OH-(aq.) → 4H2O(l) + 4e- (at anode). In the alkaline H2–O2 fuel cell O2 is reduced at the cathode and H2 oxidised at the anode: (a) and (c).
Teacher's Note: Reduction at cathode, oxidation at anode.
Exam Note: Cathode reduces O₂.
Set-2 Question 18. In the following question, more than one of the answers given may be correct. Select the correct answers and mark it according to the code. (BHU Mains 2008) Codes: In a cell Zn(s) | Zn2+ || H+ | H2(Pt), the addition of H2SO4 to the cathode compartment will: (1) decrease E, (2) increase E, (3) shift equilibrium to left, (4) shift equilibrium to right.
(a) 1, 2 and 3 are correct
(b) 1 and 2 are correct
(c) 2 and 4 are correct
(d) 1 and 3 are correct
Solution. Answer (from key): (c) 2 and 4 are correct. Adding H2SO4 raises [H+], which lowers Q = [Zn2+]PH2/[H+]2, so E increases (2) and equilibrium Zn + 2H+ ⇌ Zn2+ + H2 shifts right (4).
Teacher's Note: Reactant concentration up means E up and shift right.
Exam Note: Apply Le Chatelier and Nernst together.
Set-2 Question 19. For the reduction of NO3- in an aqueous solution, E° is 0.96 V. Values of E° for some metal ions are: V2+(aq) + 2e- → V, −1.19 V; Fe3+(aq) + 3e- → Fe, −0.04 V; Au3+(aq) + 3e- → Au, +1.40 V; Hg2+(aq) + 2e- → Hg, +0.86 V. The pair(s) of metal that is(are) oxidised by NO3- in aqueous solution is(are): (IIT 2009)
(a) V and Hg
(b) Hg and Fe
(c) Fe and Au
(d) Fe and V
Solution. Answer (from key): (a), (b) and (d) V and Hg; Hg and Fe; Fe and V. NO3- (0.96 V) oxidises metals whose E° is lower: V (−1.19), Fe (−0.04) and Hg (+0.86), but not Au (+1.40). So the correct pairs are (a), (b) and (d).
Teacher's Note: Oxidant oxidises metals with lower E°red.
Exam Note: Au is not oxidised.
Assertion-Reason Type Questions
Assertion-Reason Question 1. Assertion (A): When acidified zinc sulphate solution is electrolysed between zinc electrodes, it is zinc that is deposited at the cathode and hydrogen evolution does not take place.
Reason (R): The electrode potential of zinc is more negative than hydrogen as the over voltage for the hydrogen evolution on zinc is quite large.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (a) Both A and R correct, R explains A. Both true: the high hydrogen overvoltage on zinc prevents H2 evolution, so R explains A.
Teacher's Note: High overvoltage on Zn stops H₂ evolution even though Zn²⁺ has a lower E°.
Exam Note: Overvoltage can override E° order.
Assertion-Reason Question 2. Assertion (A): In electrolysis, the quantity of electricity needed for depositing 1 mole of silver is different from that required for 1 mole of copper.
Reason (R): The molecular weights of silver and copper are different. (AIIMS 1996)
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (b) Both A and R correct, R does not explain A. Both true (1 F for Ag, 2 F for Cu), but the reason is the ion charge (valency), not the different atomic masses.
Teacher's Note: Charge needed per mole depends on ion charge, not on atomic mass.
Exam Note: R true but not the explanation.
Assertion-Reason Question 3. Assertion (A): Equivalent conductance of all electrolytes decreases with increasing concentration.
Reason (R): Lesser number of ions are available per gram equivalent at higher concentration. (AIIMS 1999)
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (c) A correct, R incorrect. A is correct; R as stated is incorrect (for strong electrolytes the number of ions per equivalent is unchanged, interionic attraction explains the fall).
Teacher's Note: Decrease arises from interionic attraction or lower ionisation, not fewer ions in strong electrolytes.
Exam Note: R fails for strong electrolytes.
Assertion-Reason Question 4. Assertion (A): Zinc displaces copper from copper sulphate solution.
Reason (R): The E° is Zn of −0.76 volt and that of copper is +0.34 volt. (AIIMS 1999)
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (a) Both A and R correct, R explains A. Both true and R explains A: Zn has the lower reduction potential, so it reduces Cu2+.
Teacher's Note: Lower E°red metal displaces the higher one.
Exam Note: R gives the E° comparison.
Assertion-Reason Question 5. Assertion (A): An electrochemical cell can be set-up only if the redox reaction is spontaneous.
Reason (R): A reaction is spontaneous if free energy change is negative.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (b) Both A and R correct, R does not explain A. Both statements are true, but R is not the direct explanation of A in the key's view (a cell can also be set up with non-spontaneous reactions driven electrolytically).
Teacher's Note: Electrolytic cells use non-spontaneous reactions.
Exam Note: Key marks R as not the explanation.
Assertion-Reason Question 6. Assertion (A): If an aqueous solution of NaCl is electrolysed, the product obtained at the cathode is H2 gas and not Na.
Reason (R): Gases are liberated faster than the metals.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (c) A correct, R incorrect. A is true (water is reduced in preference to Na+); R is incorrect, as discharge depends on potentials, not on gas versus metal rates.
Teacher's Note: Discharge order follows electrode potentials.
Exam Note: R is false.
Assertion-Reason Question 7. Assertion (A): Specific conductance decreases with dilution whereas equivalent conductance increases.
Reason (R): On dilution, number of ions per cc decreases but total number of ions increases considerably.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (c) A correct, R incorrect. A is correct. R is marked incorrect by the key: the number of ions per cc falls, but only weak electrolytes show a large increase in total ions.
Teacher's Note: κ falls with ions per cc; Λ rises as ions become free of interaction.
Exam Note: Key marks R incorrect.
Assertion-Reason Question 8. Assertion (A): The cell constant of a cell depends upon the material of the electrodes.
Reason (R): The observed conductance of a solution depends upon the nature of the material of the electrodes.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (d) A incorrect, R correct. Per the key, A is incorrect (cell constant = l/a depends on geometry) and R is taken as correct.
Teacher's Note: Cell constant depends on distance and area only.
Exam Note: A is false: geometry only.
Assertion-Reason Question 9. Assertion (A): The ratio of specific conductivity to the observed conductance does not depend upon the concentration of the solution taken in the conductivity cell.
Reason (R): Specific conductance decreases with dilution whereas observed conductance increases with dilution.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (b) Both A and R correct, R does not explain A. Both statements marked true: κ/G is the cell constant, independent of concentration; R does not explain A.
Teacher's Note: κ/G = l/a, a property of the cell.
Exam Note: Cell constant is concentration independent.
Assertion-Reason Question 10. Assertion (A): Molar conductivity of a weak electrolyte at infinite dilution cannot be determined experimentally.
Reason (R): Kohlrausch's law helps to find the molar conductivity of a weak electrolyte at infinite dilution.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (b) Both A and R correct, R does not explain A. Both true: Λ° of a weak electrolyte cannot be found by extrapolation and is obtained through Kohlrausch's law, but R does not explain A (key b).
Teacher's Note: Weak electrolytes do not reach a linear plateau on extrapolation.
Exam Note: Use Kohlrausch for weak electrolytes.
Assertion-Reason Question 11. Assertion (A): One coulomb of electric charge deposits weight equal to the electrochemical equivalent of the substance.
Reason (R): One faraday deposits one mole of the substance.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (c) A correct, R incorrect. A is true; R is incorrect (one faraday deposits one gram equivalent, not one mole).
Teacher's Note: One mole needs n faraday for ion charge n.
Exam Note: One F gives one gram equivalent.
Assertion-Reason Question 12. Assertion (A): If standard reduction potential for the reaction Ag+ + e- → Ag is 0.80 volt, then for the reaction 2Ag+ + 2e- → 2Ag, it will be 1.60 volt.
Reason (R): If concentration of Ag+ ions is doubled, the electrode potential is also doubled.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (d) A incorrect, R correct. A is false: E° is an intensive property and stays 0.80 V. R is also false (potential changes only by (0.059) log 2). The key prints (d); note that R is not actually correct.
Teacher's Note: E° does not depend on the stoichiometric coefficients.
Exam Note: Potentials are intensive.
Assertion-Reason Question 13. Assertion (A): Gold chloride (AuCl3) solution cannot be stored in a vessel made of copper, iron, nickel, chromium, zinc or tin.
Reason (R): Gold is very precious metal.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (b) Both A and R correct, R does not explain A. Both true: these metals are more active and displace Au3+, but R is not the explanation.
Teacher's Note: Gold has the highest E°red among the listed metals.
Exam Note: Preciousness is not the reason.
Assertion-Reason Question 14. Assertion (A): In the Daniell cell, if concentrations of Cu2+ and Zn2+ ions are doubled, the emf of the cell will be doubled.
Reason (R): If the concentration of ions in contact with the metals is doubled, the electrode potential is doubled.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (d) A incorrect, R correct. Both statements are inaccurate: doubling both concentrations leaves Q unchanged so E is unchanged; electrode potential changes only slightly. The key prints (d).
Teacher's Note: Q = [Zn²⁺]/[Cu²⁺] is unchanged when both double.
Exam Note: Equal scaling leaves Q same.
Assertion-Reason Question 15. Assertion (A): H2 + O2 fuel cell gives a constant voltage throughout its life.
Reason (R): In this fuel cell, H2 reacts with OH- ions, yet the overall concentration of OH- ions does not change.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (a) Both A and R correct, R explains A. Both true and R explains A: OH- consumed at the anode is regenerated at the cathode, so the electrolyte composition stays constant.
Teacher's Note: Constant electrolyte composition gives constant emf.
Exam Note: OH⁻ is produced as it is used.
Assertion-Reason Question 16. Assertion (A): Presence of CO2 in the air accelerates corrosion.
Reason (R): CO2 is a poisonous gas.
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (c) A correct, R incorrect. A is true (CO2 dissolves to give carbonic acid, an electrolyte that speeds rusting); R is incorrect as an explanation.
Teacher's Note: Dissolved CO₂ gives H⁺, which accelerates rusting.
Exam Note: Toxicity is irrelevant.
Assertion-Reason Question 17. Assertion (A): For the Daniell cell Zn | Zn2+ || Cu2+ | Cu with Ecell = 1.1 volt, the application of opposite potential greater than 1.1 V results into flow of electrons from cathode to anode.
Reason (R): Zn is deposited at anode and Cu is dissolved at cathode. (AIIMS 2006)
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (b) Both A and R correct, R does not explain A. Both true (the cell turns electrolytic and the reaction reverses), but R does not explain A.
Teacher's Note: External potential above E° reverses the cell reaction.
Exam Note: Reversal makes it an electrolytic cell.
Assertion-Reason Question 18. Assertion (A): A current of 96.5 ampere is passed into aqueous AgNO3 solution for 100 second. The weight of silver deposited is 10.8 g. (Atomic weight of Ag = 108)
Reason (R): The mass of a substance deposited during the electrolysis of an electrolyte is inversely proportional to the quantity of electricity passing through the electrolyte. (EAMCET Engg. 2006)
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (c) A correct, R incorrect. A is true (Q = 9650 C = 0.1 F, so 0.1×108 = 10.8 g); R is false, since mass is directly proportional to charge.
Teacher's Note: Faraday's first law: m ∝ Q.
Exam Note: Mass is proportional to charge.
Assertion-Reason Question 19. Assertion (A): According to Kohlrausch's law, the molar conductance of a strong electrolyte at infinite dilution is sum of molar conductivities of its ions.
Reason (R): The current carried by cation and anion is always equal. (AIIMS 2007)
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (c) A correct, R incorrect. A is correct; R is incorrect (cation and anion carry different fractions, set by transport numbers).
Teacher's Note: Transport numbers of the two ions differ in general.
Exam Note: Currents carried differ by mobility.
Assertion-Reason Question 20. Assertion (A): The cell potential of mercury cell is 1.35 V, which remains constant.
Reason (R): In mercury cell, the electrolyte is a paste of KOH and ZnO. (AIIMS 2008)
(a) Both (A) and (R) are correct and (R) is the correct explanation of (A).
(b) Both (A) and (R) are correct but (R) is not the correct explanation of (A).
(c) (A) is correct but (R) is incorrect.
(d) (A) is incorrect but (R) is correct.
Solution. Answer (from key): (b) Both A and R correct, R does not explain A. Both true; the constant potential arises because the overall reaction involves no change in electrolyte composition, but R alone does not explain A (key b).
Teacher's Note: Electrolyte concentration does not change in a mercury cell.
Exam Note: Net reaction leaves ions unchanged.
Brain Storming Problems - Objective Questions for IIT Aspirants
Brain Storming Question 1. When aluminium oxide (Al2O3) is electrolysed for the production of aluminium metal, for a given quantity of electricity, the number of moles of aluminium obtained if the volume of O2 gas obtained is 201.6 litre measured at NTP, is:
(a) 9
(b) 6
(c) 12
(d) 4.5
Solution. Answer (from key): (c) 12. Equivalents of O2 = 201.6/5.6 = 36 (equivalent volume of O2 is 5.6 L). Equivalents of Al = 36, mass = 36×9 g, moles = 36×9/27 = 12.
Teacher's Note: Equal equivalents liberate at both electrodes; Al equivalent mass is 9.
Exam Note: Convert equivalents to moles with n = 3.
Brain Storming Question 2. A smuggler could not carry gold by depositing iron on the gold surface since:
(a) gold is denser
(b) iron rusts
(c) gold has higher reduction potential than iron
(d) gold has lower reduction potential than iron
Solution. Answer (from key): (c) gold has higher reduction potential than iron. Gold (E° = +1.50 V) has a higher reduction potential than iron, so iron cannot be deposited on gold from solution by displacement and gold is not attacked.
Teacher's Note: Compare E°red of Au and Fe.
Exam Note: Higher E°red means nobler.
Brain Storming Question 3. On electrolysis, which of the following does not give out oxygen?
(a) Acidic water using Pt electrode
(b) Fused NaOH using Pt electrode
(c) Dilute H2SO4 using Pt electrode
(d) Dilute H2SO4 using Cu electrode
Solution. Answer (from key): (d) Dilute H2SO4 using Cu electrode. With a Cu anode, copper dissolves (Cu → Cu2+ + 2e-) instead of water being oxidised, so no oxygen is evolved.
Teacher's Note: Active anode dissolves in preference to O₂ evolution.
Exam Note: Copper anode is attacked.
Brain Storming Question 4. During electrolysis of a solution of AgNO3, 9650 coulomb of charge pass through the electrolytic cell; the mass of silver deposited on the cathode will be:
(a) 21.6 g
(b) 108 g
(c) 10.8 g
(d) 1.08 g
Solution. Answer (from key): (c) 10.8 g. 9650 C = 0.1 F, so mass of Ag = 0.1×108 = 10.8 g.
Teacher's Note: One faraday deposits 108 g Ag.
Exam Note: Q/96500 gives equivalents.
Brain Storming Question 5. An electrolytic cell contains a solution of Ag2SO4 and has platinum electrodes. A current is passed until 1.6 g of O2 has been liberated at anode. The amount of silver deposited at cathode will be:
(a) 108 g
(b) 1.6 g
(c) 0.8 g
(d) 21.60 g
Solution. Answer (from key): (d) 21.60 g. Equivalents of O2 = 1.6/8 = 0.2, so equivalents of Ag = 0.2; mass = 0.2×108 = 21.6 g.
Teacher's Note: Same charge gives equal equivalents at both electrodes.
Exam Note: Equivalent of O is 8.
Brain Storming Question 6. In the process of electroplating, m g of silver is deposited when 4 ampere of current flows for 2 minutes. The amount (in g) of silver deposited by 6 ampere of current flowing for 40 seconds will be:
(a) 4m
(b) m/2
(c) 4m/3
(d) 3m
Solution. Answer (from key): (b) m/2. W1/W2 = (I1t1)/(I2t2): m/W2 = (4×120)/(6×40) = 2, so W2 = m/2.
Teacher's Note: Compare charges It in seconds.
Exam Note: Convert minutes to seconds.
Brain Storming Question 7. If four moles of electrons are transferred from anode to cathode in an experiment on electrolysis of water, then total volume of the two gases produced at STP will be:
(a) 224 L
(b) 72.6 L
(c) 67.2 L
(d) 89.4 L
Solution. Answer (from key): (c) 67.2 L. 4 F gives 4×11.2 L H2 + 4×5.6 L O2 = 44.8 + 22.4 = 67.2 L.
Teacher's Note: Equivalent volumes: H₂ 11.2 L, O₂ 5.6 L per faraday.
Exam Note: Add both gas volumes.
Brain Storming Question 8. When one faraday of electricity is passed through three electrolytic cells containing Ag+, Ni2+ and Cr3+ ions respectively, the deposited Ag (At. mass = 108), Ni (At. mass = 59) and Cr (At. mass = 52) are (Ag, Ni, Cr):
(a) 108 g, 29.5 g, 17.3 g
(b) 108 g, 59 g, 52 g
(c) 108 g, 108 g, 17.3 g
(d) 108 g, 29.5 g, 166 g
Solution. Answer (from key): (a) 108 g, 29.5 g, 17.3 g. One faraday deposits one equivalent: 108/1, 59/2 = 29.5 and 52/3 = 17.3 g.
Teacher's Note: Divide atomic mass by ion charge.
Exam Note: Equivalent mass = A/valency.
Brain Storming Question 9. Which of the following reactions occur at the cathode during the charging of lead storage battery?
(a) Pb2+ + 2e- → Pb
(b) Pb → Pb2+ + 2e-
(c) Pb2+ + SO42- → PbSO4
(d) PbSO4 + 2H2O → PbO2 + 4H+ + SO42- + 2e-
Solution. Corrected: Answer (a) Pb2+ + 2e- → Pb. (key prints (d)) At the cathode during charging, lead(II) is reduced to lead: Pb2+ + 2e- → Pb (as PbSO4 + 2e- → Pb + SO42-). Corrected: the printed key gives (d), which is the anode reaction on charging; the cathode reaction is (a).
Teacher's Note: Cathode means reduction, so the oxidation options are out.
Exam Note: Charging cathode reduces PbSO₄ to Pb.
Brain Storming Question 10. A current of 2.6 amp was passed through CuSO4 solution for 6 minutes and 20 seconds. The amount of copper deposited is:
(a) 0.3175 g
(b) 0.0031 g
(c) 6.35 g
(d) 3.175 g
Solution. Answer (from key): (a) 0.3175 g. t = 380 s; W = ItE/96500 = 2.6×380×31.75/96500 = 0.325 g, i.e. about 0.32 g, nearest 0.3175 g.
Teacher's Note: Equivalent mass of Cu = 31.75; time in seconds.
Exam Note: Q = it with t = 380 s.
Brain Storming Question 11. In the electrolysis of fused salt, the weight of the substance deposited on an electrode will not depend on:
(a) temperature of the bath
(b) current intensity
(c) time of electrolysis
(d) electrochemical equivalent of the ions
Solution. Answer (from key): (a) temperature of the bath. Mass deposited = Zit, independent of temperature.
Teacher's Note: Faraday's first law involves charge and Z only.
Exam Note: Temperature does not matter.
Brain Storming Question 12. When an aqueous solution of sodium chloride is electrolysed using platinum electrodes, the ions discharged at the electrodes are:
(a) sodium and hydrogen
(b) sodium and chloride
(c) hydrogen and chloride
(d) hydroxyl and chloride
Solution. Answer (from key): (c) hydrogen and chloride. H+ is discharged in preference to Na+ at the cathode and Cl- at the anode (concentrated brine).
Teacher's Note: Na⁺ has a lower reduction potential than H⁺.
Exam Note: H⁺ at cathode, Cl⁻ at anode.
Brain Storming Question 13. How many coulombs are required for the oxidation of 1 mole of H2O2 to O2?
(a) 9.65×104 C
(b) 93000 C
(c) 1.93×105 C
(d) 19.3×102 C
Solution. Answer (from key): (c) 1.93×105 C. H2O2 → O2 + 2H+ + 2e-: 1 mol needs 2 mol e- = 2×96500 = 1.93×105 C.
Teacher's Note: Count electrons from the half reaction.
Exam Note: n = 2.
Brain Storming Question 14. A current of 2 amp when passed for 5 hours through a molten salt deposits 22.2 g of metal of atomic mass 177. The oxidation state of the metal in the metal salt is:
(a) +1
(b) +2
(c) +3
(d) +4
Solution. Answer (from key): (c) +3. E = W×96500/(it) = 22.2×96500/(2×5×3600) = 59.5; oxidation state = 177/59.5 ≈ 3.
Teacher's Note: Equivalent mass = atomic mass/valency.
Exam Note: Time in seconds.
Brain Storming Question 15. When water is electrolysed, hydrogen and oxygen gases are produced. If 1.008 g of H2 is liberated at cathode, what mass of O2 is formed at the anode?
(a) 32 g
(b) 16 g
(c) 8 g
(d) 4 g
Solution. Answer (from key): (c) 8 g. W1/W2 = E1/E2: 1.008/W2 = 1.008/8, so W2 = 8 g.
Teacher's Note: Equal equivalents at both electrodes.
Exam Note: Equivalent mass of O is 8.
Brain Storming Question 16. The cell potential (E) and the free energy change (ΔG) accompanying an electrochemical reaction are related by:
(a) ΔG = nF log E
(b) ΔG = nFE
(c) −ΔG = nFE
(d) −ΔG = nF log E
Solution. Answer (from key): (c) −ΔG = nFE. ΔG = −nFE, i.e. −ΔG = nFE.
Teacher's Note: Maximum work equals −ΔG.
Exam Note: Note the minus sign.
Brain Storming Question 17. The units of conductivity are:
(a) siemens-1 cm-1
(b) siemens cm
(c) siemens cm-1
(d) siemens cm-2 mol-1
Solution. Answer (from key): (c) siemens cm-1. κ = G×(l/A) has unit S × cm × cm-2 = S cm-1.
Teacher's Note: Conductivity is conductance times cell constant.
Exam Note: Unit is S cm⁻¹.
Brain Storming Question 18. The calomel electrode used as a reference electrode contains:
(a) PbO2-PbSO4 mixture
(b) HgCl2
(c) Hg2Cl2
(d) ZnCl2
Solution. Answer (from key): (c) Hg2Cl2. The calomel electrode is Hg | Hg2Cl2 | KCl.
Teacher's Note: Calomel is mercurous chloride.
Exam Note: Hg₂Cl₂, not HgCl₂.
Brain Storming Question 19. KCl is used in salt bridge because:
(a) it forms a good jelly with agar-agar
(b) it is a strong electrolyte
(c) it is a good conductor of electricity
(d) the transference number of K+ and Cl- ions are almost equal
Solution. Answer (from key): (d) the transference number of K+ and Cl- ions are almost equal. K+ and Cl- have nearly equal mobilities (transport numbers), which minimises junction potential.
Teacher's Note: Equal transport numbers avoid liquid junction potential.
Exam Note: Equal ionic mobilities.
Brain Storming Question 20. The increase in the equivalent conductance on dilution of a salt solution is due to increase in the:
(a) attraction between the ions
(b) degree of ionization of the salt
(c) molecular attraction
(d) association of the salt
Solution. Answer (from key): (b) degree of ionization of the salt. On dilution, ionisation increases (weak electrolytes) and interionic attraction falls, raising Λ; the key gives degree of ionisation.
Teacher's Note: More ions per equivalent on dilution.
Exam Note: Dilution raises ionisation.
Brain Storming Question 21. When 96500 coulombs of electricity are passed through nickel sulphate solution, the amount of nickel deposited will be:
(a) 1 mol
(b) 0.5 mol
(c) 0.1 mol
(d) 2 mol
Solution. Answer (from key): (b) 0.5 mol. 1 faraday deposits 1 equivalent; 1 equivalent of Ni = 1/2 mol.
Teacher's Note: Ni²⁺ needs 2 F per mole.
Exam Note: Equivalent = half mole.
Brain Storming Question 22. Al3+(aq.) + 3e- → Al(s), E° = −1.66 V; Cu2+(aq.) + 2e- → Cu(s), E° = +0.34 V. What voltage is produced under standard conditions by combining the half-reactions with these standard electrode potentials?
(a) 1.32 V
(b) 2.00 V
(c) 2.30 V
(d) 4.34 V
Solution. Answer (from key): (b) 2.00 V. E°cell = E°cathode − E°anode = 0.34 − (−1.66) = 2.00 V.
Teacher's Note: Do not multiply E° by electron numbers.
Exam Note: Cathode minus anode.
Brain Storming Question 23. For which of these oxidation/reduction pairs will the reduction potential vary with pH? I. AmO2+/AmO22+ II. AmO22+/Am4+ III. Am4+/Am2+
(a) I only
(b) II only
(c) I and II only
(d) I, II and III
Solution. Answer (from key): (b) II only. Pair II involves H+ (4H+ + AmO22+ + 2e- → Am4+ + 2H2O), so its potential depends on pH.
Teacher's Note: pH dependence arises only if H⁺ appears in the half reaction.
Exam Note: H⁺ in the equation means pH dependence.
Brain Storming Question 24. 2Ag+(aq.) + Cu(s) ⇌ Cu2+(aq.) + 2Ag(s). The standard potential E° for this reaction is 0.46 V. Which change will increase the potential the most?
(a) Doubling the [Ag+]
(b) Halving the [Cu2+]
(c) Doubling the size of the Cu(s) electrode
(d) Decreasing the size of the Ag electrode by one-half
Solution. Answer (from key): (a) Doubling the [Ag+]. Doubling [Ag+] raises E by 0.059 log 2 = 0.018 V (squared in Q); halving [Cu2+] gives 0.009 V; size does not matter.
Teacher's Note: Ag⁺ has the square in Q, so it counts twice.
Exam Note: Electrode size is irrelevant.
Brain Storming Question 25. 10Cl-(aq.) + 2MnO4-(aq.) + 16H+(aq.) ⇌ 5Cl2(g) + 2Mn2+(aq.) + 8H2O(l). The value of E° for this reaction is 0.15 V. What is the value of the equilibrium constant (K) for this reaction?
(a) 2.4×1025
(b) 4.9×1012
(c) 1.2×105
(d) 3.4×102
Solution. Answer (from key): (a) 2.4×1025. n = 10: K = antilog(nE°/0.059) = antilog(10×0.15/0.059) = antilog(25.4) ≈ 2.4×1025.
Teacher's Note: Count 10 electrons from the balanced equation.
Exam Note: n = 10.
Brain Storming Question 26. What takes place when zinc metal is added to an aqueous solution containing magnesium nitrate and silver nitrate? (1) Zn is oxidised (2) Mg2+ is reduced (3) Ag+ is reduced (4) No reaction takes place
(a) 1 and 2 only
(b) 1 and 3 only
(c) 1, 2 and 3 only
(d) 4 only
Solution. Answer (from key): (b) 1 and 3 only. Zn (−0.76 V) reduces Ag+ (+0.80 V) but not Mg2+ (−2.37 V): Zn is oxidised and Ag+ is reduced.
Teacher's Note: Zn cannot reduce Mg²⁺.
Exam Note: Compare E° for each ion.
Brain Storming Question 27. In the galvanizing process, iron is coated with zinc. The resulting chemical protection is most similar to that provided when:
(a) a magnesium bar is connected to an iron pipe
(b) an iron can is plated with tin
(c) copper pipes are connected using lead solder
(d) a copper pipe is covered with epoxy paint
Solution. Answer (from key): (a) a magnesium bar is connected to an iron pipe. Zinc protects iron sacrificially (zinc corrodes first); connecting a more active Mg bar to an iron pipe gives the same sacrificial protection.
Teacher's Note: Sacrificial anode: the more active metal corrodes instead.
Exam Note: Mg protects Fe like Zn does.
Brain Storming Question 28. What is the sign of ΔG° and the value of K for an electrochemical cell for which E°cell = 0.80 V?
(a) ΔG° negative, K > 1
(b) ΔG° positive, K > 1
(c) ΔG° positive, K < 1
(d) ΔG° negative, K < 1
Solution. Answer (from key): (a) ΔG° negative, K > 1. ΔG° = −nFE° is negative for positive E°, and K = e−ΔG°/RT > 1.
Teacher's Note: Positive E° means spontaneous, large K.
Exam Note: Positive E° gives negative ΔG° and K > 1.
Brain Storming Question 29. Consider a voltaic cell based on half-cells Ag+(aq.) + e- → Ag(s), E° = +0.80 V and Cd2+(aq.) + 2e- → Cd(s), E° = −0.40 V. Identify the anode and give the voltage of this cell under standard conditions.
(a) Ag; Ecell = 0.40 V
(b) Ag; Ecell = 2.00 V
(c) Cd; Ecell = 1.20 V
(d) Cd; Ecell = 2.00 V
Solution. Answer (from key): (c) Cd; Ecell = 1.20 V. The half cell with the lower reduction potential (Cd) is the anode: E°cell = 0.80 − (−0.40) = 1.20 V.
Teacher's Note: Anode has lower E°red; do not double E° for Ag.
Exam Note: Cathode minus anode.
Brain Storming Question 30. If the E°cell for a given reaction has a negative value, which gives the correct relationships for the values of ΔG° and Keq?
(a) ΔG° > 0; Keq < 1
(b) ΔG° > 0; Keq > 1
(c) ΔG° < 0; Keq > 1
(d) ΔG° < 0; Keq < 1
Solution. Answer (from key): (a) ΔG° > 0; Keq < 1. Negative E° gives ΔG° = −nFE° > 0 and log K = nE°/0.059 < 0, so K < 1.
Teacher's Note: Opposite of Q28.
Exam Note: Negative E° gives K < 1.
Brain Storming Question 31. Which of the following solutions is used as an anti-rusting solution?
(a) Na2SO4
(b) Na3PO4
(c) Na3BO3
(d) Na2S
Solution. Answer (from key): (b) Na3PO4. Sodium phosphate forms a protective iron phosphate film (alkaline phosphate solution is anti-rusting).
Teacher's Note: Phosphate passivates the iron surface.
Exam Note: Phosphate forms a protective film.
Brain Storming Question 32. The pressure of hydrogen gas is increased from 1 atm to 100 atm. Keeping the H+ (1 M) constant, the voltage of the hydrogen half-cell at 25°C will be:
(a) 0.059 V
(b) 0.59 V
(c) 0.0295 V
(d) 0.118 V
Solution. Corrected: Answer (a) 0.059 V. (key prints (d)) For 2H+ + 2e- → H2, E = −(0.059/2) log(PH2/[H+]2) = −0.0295×2 = −0.059 V. Corrected: the printed key gives (d) 0.118 V; the calculated magnitude of the change is 0.059 V, option (a) (potential falls to −0.059 V).
Teacher's Note: Pressure enters Nernst through log P.
Exam Note: Use log 100 = 2.
Brain Storming Question 33. Efficiency of the following cell is 84%. A(s) + B2+(aq.) ⇌ A2+(aq.) + B(s); ΔH = −285 kJ. Then the standard electrode potential of the cell will be:
(a) 1.20 V
(b) 2.40 V
(c) 1.10 V
(d) 1.24 V
Solution. Answer (from key): (d) 1.24 V. Efficiency = ΔG°/ΔH° = −nFE°/ΔH°: 0.84 = 2×E°×96500/(285×1000), so E° = 1.24 V.
Teacher's Note: Efficiency compares ΔG with ΔH.
Exam Note: n = 2.
Brain Storming Question 34. A chemical reaction will be spontaneous if:
(a) E°cell is positive
(b) ΔG° is negative
(c) reaction quotient, Q < K
(d) E°oxid is negative
Solution. Answer (from key): (a), (b), (c) and (d) E°cell is positive; ΔG° is negative; reaction quotient, Q < K; E°oxid is negative. The key marks all four as acceptable conditions for spontaneity (positive E°, negative ΔG°, Q < K); statement (d) as printed is accepted by the key.
Teacher's Note: Spontaneous: E > 0, ΔG < 0, Q < K.
Exam Note: Check each criterion.
Brain Storming Question 35. Match List-I (Electrode) with List-II (Type): 1. Calomel, 2. Glass, 3. Hydrogen, 4. Quinhydrone; (A) Reference, (B) Redox, (C) Membrane, (D) Gas. Codes: (a) 1-A, 2-C, 3-D, 4-B (b) 1-B, 2-A, 3-D, 4-C (c) 1-C, 2-B, 3-A, 4-D (d) 1-D, 2-A, 3-C, 4-B
(a) 1-A, 2-C, 3-D, 4-B
(b) 1-B, 2-A, 3-D, 4-C
(c) 1-C, 2-B, 3-A, 4-D
(d) 1-D, 2-A, 3-C, 4-B
Solution. Answer (from key): (a) 1-A, 2-C, 3-D, 4-B. Calomel is a reference electrode (A), glass a membrane electrode (C), hydrogen a gas electrode (D), quinhydrone a redox electrode (B).
Teacher's Note: Classify electrodes by construction.
Exam Note: Match each electrode to its type.
Brain Storming Question 36. The conductivity of saturated solution of BaSO4 is 3.06×10-6 mho cm-1 and its equivalent conductance is 1.53 mho cm2 eq-1. The Ksp for BaSO4 will be:
(a) 4×10-12 M
(b) 4×106 M
(c) 4×10-12 M2
(d) 4×10-6 M2
Solution. Answer (from key): (d) 4×10-6 M2. S = 1000κ/Λ = 1000×3.06×10-6/1.53 = 2×10-3; Ksp = S2 = 4×10-6 (the key treats 2×10-3 as molarity; strictly it is normality, giving 1×10-6).
Teacher's Note: Saturated solution is so dilute that Λ ≈ Λ°.
Exam Note: Square the solubility.
Brain Storming Question 37. The standard reduction potential of hydrogen is zero because:
(a) it is assumed
(b) hydrogen is easiest to oxidise
(c) hydrogen has single electron
(d) hydrogen is electronegative
Solution. Answer (from key): (a) it is assumed. The standard hydrogen electrode is arbitrarily assigned 0.00 V as the reference.
Teacher's Note: It is a convention.
Exam Note: SHE = 0 by convention.
Brain Storming Question 38. Statements: I. Conductance of electrolyte solution increases with temperature. II. Resistivity is reciprocal of molar conductivity of electrolyte. III. Cell constant has unit cm-1. Mark: (a) all correct, (b) II and III correct, (c) I and III correct, (d) only II correct.
(a) all statements are correct
(b) II and III are correct
(c) I and III are correct
(d) only II is correct
Solution. Answer (from key): (c) I and III are correct. I is true (higher temperature raises ion mobility); II is false (resistivity is reciprocal of conductivity, not molar conductivity); III is true (l/A in cm-1).
Teacher's Note: Check each statement separately.
Exam Note: Resistivity = 1/κ.
Brain Storming Question 39. Statements: I. The conductivity of molten NaCl is due to movement of Na+ and Cl- ions. II. Solid NaCl is also conductor of electricity. III. Molten sodium is a good conductor because of mobile electrons. Mark: (a) all correct, (b) II and III correct, (c) I and III correct, (d) only II correct.
(a) all statements are correct
(b) II and III are correct
(c) I and III are correct
(d) only II is correct
Solution. Answer (from key): (c) I and III are correct. I and III are true; solid NaCl does not conduct (ions fixed in the lattice), so II is false.
Teacher's Note: Ionic solids do not conduct.
Exam Note: Solid NaCl is an insulator.
Brain Storming Question 40. Statements: I. Cathode is −ve terminal both in electrochemical and electrolytic cells. II. Reduction occurs at cathode both in galvanic as well as electrolytic cells. III. Chemical change in electrolytic cell is non-spontaneous. Mark: (a) all correct, (b) II and III correct, (c) I and III correct, (d) only II correct.
(a) all statements are correct
(b) II and III are correct
(c) I and III are correct
(d) only II is correct
Solution. Answer (from key): (b) II and III are correct. I is false (cathode is positive in a galvanic cell); II and III are true.
Teacher's Note: Polarity differs between cell types; reduction is always at the cathode.
Exam Note: Cathode: reduction always.
Brain Storming Question 41. In an experiment, 0.04 F was passed through 400 mL of a 1 M solution of NaCl. What would be the pH of the solution after the electrolysis? (PMT Kerala 2007)
(a) 8
(b) 10
(c) 13
(d) 6
(e) 9
Solution. Answer (from key): (c) 13. Electrolysis of aqueous NaCl gives H2, Cl2 and NaOH: 0.04 mol NaOH in 0.4 L = 0.1 M, pOH = 1, pH = 13.
Teacher's Note: OH⁻ formed equals faraday passed.
Exam Note: pH = 14 − pOH.
Brain Storming Question 42. An alloy of Pb-Ag weighing 1.08 g was dissolved in dilute HNO3 and the volume made to 100 mL. A silver electrode was dipped in the solution and the emf of the cell set-up Pt(s), H2(g) | H+(1 M) || Ag+ | Ag(s) was 0.62 V. If E°cell is 0.80 V, what is the percentage of Ag in the alloy? (At 25°C, RT/F = 0.06) (PET Kerala 2007)
(a) E = E° + (2.303RT/F) log[Ag+] = 0.80 + 0.06×2.303 log[Ag+] (as printed, with RT/F = 0.06) = 0.62, so log[Ag+] = −1.30 and [Ag+] ≈ 0.05 M. Moles Ag = 0.05×100/1000 = 0.005, mass = 0.54 g, so % Ag = 0.54/1.08×100 = 50 (option (e)).
(b) 2.50
(c) 10
(d) 1
(e) 50
Solution. Answer (from key): (e) 50. 0.62 = 0.80 + (0.06×2.303/2)×2/... i.e. E = E° + 0.06×2.303 log[Ag+], so log[Ag+] = −0.18/0.138 ≈ −1.30, [Ag+] = 0.05 M. Moles Ag = 0.05×100/1000 = 0.005; mass = 0.54 g; % = 0.54/1.08×100 = 50 (option (e), 50).
Teacher's Note: Nernst gives [Ag⁺]; convert to mass and percentage.
Exam Note: Answer is option (e) 50.
Brain Storming Question 43. Select the correct statements about dry cell:
(a) It is also called Leclanche cell
(b) It is also called Daniell cell
(c) Electrolyte used is moist paste of NH4Cl and ZnCl2
(d) Cathodic process is: 2MnO2(s) + 2NH4+(aq.) + 2e- → Mn2O3(s) + 2NH3(g) + H2O(l)
Solution. Answer (from key): (a), (c) and (d) It is also called Leclanche cell. The dry cell is the Leclanche cell, with a moist paste of NH4Cl and ZnCl2, and the stated cathodic reaction. It is not the Daniell cell.
Teacher's Note: Dry cell = Leclanche; Daniell uses Zn/Cu salts.
Exam Note: Statements (a), (c) and (d) are correct.
Brain Storming Question 44. Given the standard oxidation potentials: Fe → Fe2+(aq.) (+0.4 V) → Fe3+(aq.) (−0.8 V); Fe → Fe(OH)2 (+0.9 V) → Fe(OH)3 (+0.6 V). It is easier to oxidise Fe2+ to Fe3+ in:
(a) acid medium
(b) alkaline medium
(c) neutral medium
(d) both acidic and alkaline mediums
Solution. Answer (from key): (b) alkaline medium. The oxidation potential for Fe2+ → Fe3+ is −0.8 V in acid but +0.6 V (Fe(OH)2 → Fe(OH)3) in alkaline medium, so oxidation is easier in alkaline medium.
Teacher's Note: Higher oxidation potential means easier oxidation.
Exam Note: Alkaline medium: +0.6 V vs −0.8 V.
Brain Storming Question 45. Dipping iron article into a strongly alkaline solution of sodium phosphate: (VITEEE 2008)
(a) does not affect the article
(b) forms Fe2O3·xH2O on the surface
(c) forms iron phosphate film
(d) forms ferric hydroxide
Solution. Answer (from key): (c) forms iron phosphate film. The phosphate solution forms a protective iron phosphate film (phosphating) that prevents rusting.
Teacher's Note: Phosphating is an anti-rust treatment.
Exam Note: Iron phosphate film forms.
Brain Storming Question 46. For the redox process Zn(s) + Cu2+ ⇌ Zn2+ + Cu(s), E°cell = +1.10 V, which graph correctly represents Ecell (Y-axis) as a function of log([Zn2+]/[Cu2+]) (X-axis)? (graph (a): line rising slightly with positive slope crossing the axis at 1.10 V; (b): straight line with negative slope crossing the Y-axis at 1.10 V; (c): horizontal line; (d): decaying curve)
(a) graph (a)
(b) graph (b)
(c) graph (c)
(d) graph (d)
Solution. Answer (from key): (b) graph (b). E = 1.10 − 0.0295 log([Zn2+]/[Cu2+]) is a straight line of negative slope with intercept 1.10 V.
Teacher's Note: Nernst equation is linear in log Q.
Exam Note: Negative slope, intercept E°.
Brain Storming Question 47. A fuel cell involves combustion of butane at 1 atm and 298 K: C4H10(g) + 13/2 O2(g) → 4CO2(g) + 5H2O(l), ΔG° = −2746 kJ/mol. What is E° of a cell?
(a) +4.74 V
(b) +0.547 V
(c) +1.09 V
(d) +4.37 V
Solution. Answer (from key): (c) +1.09 V. Oxidation number of carbon changes by +26 in total, so n = 26. E° = −ΔG°/nF = 2746×1000/(26×96500) = +1.09 V.
Teacher's Note: Count electrons from the change in oxidation number of carbon.
Exam Note: n = 26 for butane.
Brain Storming Question 48. Molar conductance Λm is plotted against √C (mol litre-1)1/2 for three electrolytes (NaCl, HCl, NH4OH): curves (1) and (2) are straight lines, curve (1) above curve (2), and curve (3) falls steeply like a hyperbola. Which of the following is correct (1, 2, 3)?
(a) NaCl, HCl, NH4OH
(b) HCl, NaCl, NH4OH
(c) NH4OH, NaCl, HCl
(d) NH4OH, HCl, NaCl
Solution. Answer (from key): (b) HCl, NaCl, NH4OH. The weak electrolyte NH4OH gives the steep curve (3); the strong electrolytes give straight lines, HCl higher (1) than NaCl (2) since λ°(H+) is largest.
Teacher's Note: Weak electrolytes do not give a straight line against √C.
Exam Note: HCl has the highest Λ°.
Brain Storming Question 49. In the concentration cell Pt(H2) | HA (0.1 M), NaA (1 M) || HA (1 M), NaA (1 M) | (H2)Pt (pKa of HA = 4), the cell potential will be:
(a) [H+] = Ka[HA]/[A-]: anode (0.1 M HA, 1 M A-) has pH = 4 + log(1/0.1) = 5; cathode pH = 4. E = 0.0591 log([H+]cathode/[H+]anode) = +0.06 V. Corrected: the printed key gives (c) −0.06 V, which uses pH = pKa + log([HA]/[A-]) (inverted); the correct option is (b).
(b) 0.06 V
(c) −0.06 V
(d) −0.03 V
Solution. Corrected: Answer (b) 0.06 V. (key prints (c)) pH of anode = pKa + log([A-]/[HA]) = 4 + log(1/0.1) = 5... as printed in the hint: pHanode = 3, pHcathode = 4, so E = 0.06(pHanode − pHcathode) = −0.06 V.
Teacher's Note: Buffer pH from Henderson–Hasselbalch; cell emf from pH difference.
Exam Note: E = 0.06 × (pH difference).
Brain Storming Question 50. In the following process of disproportionation: 2ClO3- ⇌ ClO2- + ClO4-, E°ClO4-/ClO3- = +0.36 V, E°ClO3-/ClO2- = +0.33 V. Initial concentration of chlorate ion was 0.1 M. The equilibrium concentration of perchlorate ion will be:
(a) 0.19 V
(b) 0.1 M
(c) 0.024 M
(d) 0.019 M
Solution. Answer (from key): (d) 0.019 M. E°cell = 0.33 − 0.36 = −0.03 V; at equilibrium 0 = −0.03 − (0.059/2) log K gives log K = −1, K = 1/10. K = x²/(0.1−2x)² = 1/10 gives x = 0.019 M.
Teacher's Note: Treat disproportionation as a cell; solve the quadratic or square root.
Exam Note: K = 0.1 from E° with n = 2.
Integer Answer Type Questions
Integer Question 1. How many grams of water will be electrolysed by 96500 coulomb charge?
Solution. Answer (from key): 9. 96500 C = 1 F liberates 1 equivalent; equivalent mass of water = 18/2 = 9 g.
Teacher's Note: One faraday electrolyses one equivalent of water.
Exam Note: Equivalent mass of water is 9.
Integer Question 2. Number of faradays required to convert 1 mole of Cr2O72- into Cr3+ ions is:
Solution. Answer (from key): 6. Cr2O72- + 14H+ + 6e- → 2Cr3+ + 7H2O: 6 electrons per mole, i.e. 6 faraday.
Teacher's Note: Count electrons from oxidation states: 2 Cr from +6 to +3.
Exam Note: Six electrons per dichromate.
Integer Question 3. At what pH the potential of hydrogen electrode will be 0.059 V?
Solution. Answer (from key): 1. E = −0.059 pH, so a magnitude of 0.059 V corresponds to pH = 1 (the key takes the magnitude).
Teacher's Note: Hydrogen electrode potential is −0.059 times pH at 25°C.
Exam Note: Use E = −0.059 pH.
Integer Question 4. The ratio of (Λm/Λe) for Ca3(PO4)2 will be equal to:
Solution. Answer (from key): 6. Λm = Λe × n-factor; for Ca3(PO4)2 the total positive charge is 3×2 = 6, so the ratio is 6.
Teacher's Note: Molar to equivalent ratio equals the total charge per formula unit.
Exam Note: n-factor of Ca₃(PO₄)₂ is 6.
Integer Question 5. I2(s) | I-(0.1 M) half-cell is connected to H+(aq.) | H2(1 atm) Pt half-cell and its cell potential is found to be 0.7714 V. If E°I2/I- = 0.535 V, the pH of H+/H2 half-cell will be:
Solution. Answer (from key): 3. EI2/I- = 0.535 + 0.0591 log(1/0.1) = 0.594 V. Cell emf = 0.594 − EH = 0.7714, so EH = −0.177 V = −0.0591 pH, giving pH = 3.
Teacher's Note: Find the iodine half-cell potential first, then solve for the hydrogen electrode.
Exam Note: E(H) = −0.059 pH.
Integer Question 6. If an aqueous solution of NaCl is electrolysed using platinum electrode by a current of 5 amp, then what volume of Cl2 gas in litres at STP will be produced? (the time of passage is not legible in the scan)
Solution. Answer (from key): 7. The printed answer is 7 L; the time of electrolysis is missing from the scanned question, so this cannot be verified (V = 11.2×It/96500 L).
Teacher's Note: Volume of Cl₂ = 11.2 × (charge in faraday) at STP.
Exam Note: Needs the time of electrolysis.
Integer Question 7. Charge of 6.24×1018 electrons will be (in coulomb):
Solution. Answer (from key): 1. Q = 6.24×1018 × 1.6×10-19 C ≈ 1.0 C.
Teacher's Note: Charge = number of electrons × 1.6×10⁻¹⁹ C.
Exam Note: Multiply by electronic charge.
Integer Question 8. A current of 2 amp when passed for 5 hour through a molten salt deposits 22.2 g of metal of atomic mass 177. The positive oxidation state of the metal in the metal salt is:
Solution. Answer (from key): 3. E = 22.2×96500/(2×5×3600) = 59.5; oxidation state = 177/59.5 = 3.
Teacher's Note: Equivalent mass = atomic mass ÷ oxidation state.
Exam Note: Hours to seconds.
Integer Question 9. In the cell Cr(s) | Cr3+ || Fe2+ | Fe(s), the value of n in the Nernst equation E = E° − (0.059/n) log10Q will be:
Solution. Answer (from key): 6. 2Cr + 3Fe2+ → 2Cr3+ + 3Fe transfers 6 electrons, so n = 6.
Teacher's Note: Balance electrons: 2×3 = 3×2 = 6.
Exam Note: n is the lcm of electron changes.
Integer Question 10. In the Nernst equation E = E° − (2.303RT/nF) log10Q, Q will be equal to the equilibrium constant Kc, when the cell potential E is equal to:
Solution. Answer (from key): 0. At equilibrium the cell does no work: E = 0 and Q = Kc.
Teacher's Note: At equilibrium ΔG = 0, so E = 0.
Exam Note: E = 0 at equilibrium.
Linked Comprehension Type Questions
Passage 1 Question 1. Passage 1 (lead storage battery: Pb anode, PbO2 cathode, conc. H2SO4 electrolyte, 3.5 L of acid; during discharge the density of the acid falls from 1.294 to 1.139 g/mL; 1.294 g/mL acid is 39% by mass and 1.139 g/mL is 20% by mass). Equivalent mass of sulphuric acid in lead storage battery is:
(a) 49
(b) 98
(c) 24.5
(d) none of these
Solution. Answer (from key): (b) 98. Pb + PbO2 + 2H2SO4 → 2PbSO4 + 2H2O transfers 2e- per 2 H2SO4, i.e. 1 electron per H2SO4, so the equivalent mass is 98.
Teacher's Note: n-factor is electrons per formula unit consumed.
Exam Note: n-factor of H₂SO₄ here is 1.
Passage 1 Question 2. Passage 1. Normalities of sulphuric acid before and after discharge are:
(a) 5.15, 2.32
(b) 2.32, 5.15
(c) 5.15, 5.15
(d) 2.32, 2.32
Solution. Answer (from key): (a) 5.15, 2.32. Before: 1.294×1000×0.39/98 = 5.15 M = 5.15 N (n = 1). After: 1.139×1000×0.20/98 = 2.32 N.
Teacher's Note: N = 10×density×% by mass/equivalent mass.
Exam Note: Use n = 1 for normality.
Passage 1 Question 3. Passage 1. The number of ampere-hours for which the battery must have been used is:
(a) 26504 amp-hrs
(b) 2650.4 amp-hrs
(c) 265.04 amp-hrs
(d) 26.504 amp-hrs
Solution. Answer (from key): (c) 265.04 amp-hrs. Equivalents used = 3.5×(5.15 − 2.32) ≈ 9.9; charge = 9.9×26.8 Ah per equivalent ≈ 265 amp-hrs.
Teacher's Note: 1 faraday = 26.8 ampere-hours.
Exam Note: Multiply equivalents by 26.8.
Passage 1 Question 4. Passage 1. The amount of charge which the battery must have been used is:
(a) 9.88 F
(b) 8.98 F
(c) 8.89 F
(d) 7.88 F
Solution. Answer (from key): (a) 9.88 F. Equivalents of acid used = 3.5×(5.15 − 2.32) ≈ 9.88, so charge ≈ 9.88 F.
Teacher's Note: Charge in faraday equals equivalents consumed.
Exam Note: F = equivalents used.
Passage 1 Question 5. Passage 1. Which of the following takes place in discharge process at anode?
(a) PbO2 + 4H+ + SO42- + 2e- → PbSO4 + 2H2O
(b) PbSO4 + 2H2O → PbO2 + 4H+ + SO42- + 2e-
(c) Pb + SO42- → PbSO4 + 2e-
(d) PbSO4 + 2e- → Pb + SO42-
Solution. Answer (from key): (c) Pb + SO42- → PbSO4 + 2e-. During discharge Pb is oxidised at the anode: Pb + SO42- → PbSO4 + 2e-.
Teacher's Note: Anode means oxidation; option (a) is the cathode reaction.
Exam Note: Discharge anode: Pb to PbSO₄.
Passage 2 Question 1. Passage 2 (electrolysis: oxidation at anode, reduction at cathode; m = ItE/96500). Platinum electrodes were immersed in a solution of cupric sulphate and electric current is passed through the solution. After sometime, it was observed that the colour of copper sulphate disappeared with evolution of a gas at the electrode. The colourless solution contains:
(a) platinum sulphate
(b) copper nitrate
(c) copper sulphate
(d) sulphuric acid
Solution. Answer (from key): (d) sulphuric acid. Cu2+ is deposited and O2 evolved at the anode: 2CuSO4 + 2H2O → 2Cu + O2 + 2H2SO4, leaving colourless sulphuric acid.
Teacher's Note: Blue colour disappears when Cu²⁺ is removed.
Exam Note: Acid forms at the anode.
Passage 2 Question 2. Passage 2. The passage of current liberates H2 at cathode and Cl2 at anode. The solution is:
(a) copper chloride in water
(b) NaCl in water
(c) mercuric chloride in water
(d) AuCl3 in water
Solution. Answer (from key): (b) NaCl in water. Only NaCl(aq) gives H2 at the cathode (Na+ is not discharged) and Cl2 at the anode; Cu, Hg and Au would deposit.
Teacher's Note: Metals below H deposit at the cathode.
Exam Note: Na⁺ is not discharged.
Passage 2 Question 3. Passage 2. On electrolysis of dilute sulphuric acid using platinum electrodes, the product obtained at the anode will be:
(a) hydrogen
(b) oxygen
(c) hydrogen sulphide
(d) sulphur dioxide
Solution. Answer (from key): (b) oxygen. Water is oxidised at the anode: 2H2O → O2 + 4H+ + 4e-; sulphate is not discharged.
Teacher's Note: Pt anodes are inert; O₂ is evolved.
Exam Note: Anode gives O₂.
Passage 2 Question 4. Passage 2. How many faradays are required to reduce 1 mol BrO3- to Br-?
(a) 3
(b) 5
(c) 6
(d) 4
Solution. Answer (from key): (c) 6. Br changes from +5 to −1, a gain of 6 electrons, so 6 faraday.
Teacher's Note: Count the oxidation-number change.
Exam Note: n = 6.
Passage 2 Question 5. Passage 2. Calculate the volume of gas liberated at the anode at STP during the electrolysis of a CuSO4 solution by a current of 1 A passed for 16 minutes and 5 seconds:
(a) 224 mL
(b) 56 mL
(c) 112 mL
(d) 448 mL
Solution. Answer (from key): (b) 56 mL. Q = 1×965 = 965 C = 0.01 F. Oxygen equivalent volume is 5.6 L, so V = 0.01×5.6 L = 56 mL.
Teacher's Note: Anode gas is O₂, 5.6 L per faraday.
Exam Note: Time = 965 s.
Passage 2 Question 6. Passage 2. The quantity of electricity required to liberate 112 cc hydrogen at STP from acidified water is: (Comed Karnataka 2008)
(a) 965 C
(b) 9650 C
(c) 96500 C
(d) 4825 C
Solution. Answer (from key): (a) 965 C. 112 cc = 0.112 L = 0.01×11.2 L, i.e. 0.01 F = 965 C.
Teacher's Note: 11.2 L of H₂ per faraday.
Exam Note: Convert cc to litres.
Passage 3 Question 1. Passage 3 (potassium ion concentration inside a biological cell is at least twenty times higher than outside; model concentration cell M(s) | M+(aq., 0.05 molar) || M+(aq., 1 molar) | M(s); the magnitude of the cell potential |Ecell| = 70 mV). For the above electrolytic cell:
(a) Ecell < 0; ΔG > 0
(b) Ecell > 0; ΔG < 0
(c) Ecell < 0; ΔG° > 0
(d) Ecell > 0; ΔG° < 0
Solution. Answer (from key): (b) Ecell > 0; ΔG < 0. The concentration cell is spontaneous when the cathodic half-cell is more concentrated; here the cathode is 1 M, so Ecell > 0 and ΔG < 0.
Teacher's Note: Concentration cell runs from concentrated cathode to dilute anode.
Exam Note: Cathode concentration exceeds anode.
Passage 3 Question 2. Passage 3. If the 0.05 molar solution of M+ is replaced by a 0.0025 molar M+ solution, then the magnitude of the cell potential would be: (IIT 2010)
(a) 35 mV
(b) 70 mV
(c) 140 mV
(d) 700 mV
Solution. Corrected: Answer (c) 140 mV. (key prints (b)) E = (0.059/1) log(1/0.0025) = 0.059×2.6 = 0.153 V, close to 140 mV (option (c), as the printed hint states). Corrected: the printed key gives (b) 70 mV, but the book's own hint gives (c).
Teacher's Note: E° = 0 for a concentration cell.
Exam Note: Use the log of the concentration ratio.
Passage 4 Question 1. Passage 4 (E = −ΔG/nF; Nernst E = E° − (0.059/n) log Q; E° = (0.059/n) log K at equilibrium). On the basis of information available for the reaction (4/3)Al + O2 → (2/3)Al2O3, ΔG = −827 kJ/mol of O2, the minimum emf required to carry out an electrolysis of Al2O3 is: (Given: 1 F = 96500 C)
(a) 2.14 V
(b) 4.28 V
(c) 6.42 V
(d) 8.56 V
Solution. Answer (from key): (a) 2.14 V. (4/3) mol Al = (4/3)×3 = 4 mol e-, so n = 4. E = −ΔG/nF = 827×1000/(4×96500) = 2.14 V.
Teacher's Note: Count electrons for the balanced equation as written.
Exam Note: n = 4 for 4/3 Al.
Passage 4 Question 2. Passage 4. The equilibrium constant Kc will be equal to Q, when:
(a) E = E°
(b) RT/nF = 1
(c) E = 0
(d) E° = 1
Solution. Answer (from key): (c) E = 0. At equilibrium E = 0 and Q = Kc.
Teacher's Note: Cell emf vanishes at equilibrium.
Exam Note: E = 0 gives Q = K.
Passage 4 Question 3. Passage 4. The nature of graph of E°cell against log Kc is a/an:
(a) straight line
(b) parabola
(c) hyperbola
(d) elliptical curve
Solution. Answer (from key): (a) straight line. E° = (0.059/n) log K is linear in log K, so the graph is a straight line through the origin.
Teacher's Note: y = mx form.
Exam Note: E° is proportional to log K.
Passage 4 Question 4. Passage 4. The equilibrium constant Kc for the reaction Cu(s) + 2Ag+(aq.) ⇌ Cu2+(aq.) + 2Ag(s) (E°cell = 0.46 V) will be:
(a) antilog 15.6
(b) antilog 2.5
(c) antilog 1.5
(d) antilog 12.2
Solution. Answer (from key): (a) antilog 15.6. log K = nE°/0.059 = 2×0.46/0.059 = 15.6, so K = antilog 15.6.
Teacher's Note: n = 2.
Exam Note: Use log K = nE°/0.059.
Passage 4 Question 5. Passage 4. E° for the electrochemical cell Zn(s) | Zn2+(1 M) || Cu2+(1 M) | Cu(s) is 1.10 volt at 25°C. The equilibrium constant for the cell reaction Zn(s) + Cu2+(aq.) ⇌ Cu(s) + Zn2+(aq.) will be:
(a) 10-37
(b) 1037
(c) 10-39
(d) 1039
Solution. Answer (from key): (b) 1037. log K = 2×1.10/0.059 = 37.3, so K ≈ 1037.
Teacher's Note: n = 2.
Exam Note: log K = nE°/0.059.
Passage 5 Question 1. Passage 5 (conductors: κ = c × l/A; Λm = κ×1000/M; Λe = κ×1000/N; Λm = Λm° − b√c for strong electrolytes; α = Λm/Λm° = Λe/Λe°). Which of the following decreases on dilution of electrolyte solution?
(a) Equivalent conductance
(b) Molar conductance
(c) Specific conductance
(d) Conductance
Solution. Answer (from key): (c) Specific conductance. Specific conductance (κ) decreases on dilution because fewer ions are present per unit volume; Λ rises.
Teacher's Note: κ falls, Λ rises with dilution.
Exam Note: κ is per unit volume.
Passage 5 Question 2. Passage 5. The correct order of equivalent conductances at infinite dilution of LiCl, NaCl and KCl is:
(a) LiCl > NaCl > KCl
(b) KCl > NaCl > LiCl
(c) NaCl > KCl > LiCl
(d) LiCl > KCl > NaCl
Solution. Answer (from key): (b) KCl > NaCl > LiCl. The smaller hydrated ion moves more slowly: Li+ (largest hydrated) < Na+ < K+, so KCl > NaCl > LiCl.
Teacher's Note: Hydrated radius governs mobility.
Exam Note: Smaller hydrated ion, higher mobility.
Passage 5 Question 3. Passage 5. For which of the following electrolytic solutions are Λm and Λe equal?
(a) BaCl2
(b) KCl
(c) Al2(SO4)3
(d) CaCl2
Solution. Answer (from key): (b) KCl. Λm = Λe when M = N, i.e. for a 1:1 electrolyte such as KCl.
Teacher's Note: M = N when the n-factor is 1.
Exam Note: Only univalent pairs.
Passage 5 Question 4. Passage 5. The conductance of a solution of an electrolyte is equal to that of its specific conductance. The cell constant of the conductivity cell is equal to:
(a) resistance
(b) faraday
(c) zero
(d) unity
Solution. Answer (from key): (d) unity. κ = G × (cell constant); equal κ and G imply cell constant = 1.
Teacher's Note: Cell constant = κ/G.
Exam Note: Cell constant is unity.
Passage 5 Question 5. Passage 5. Which of the following equality holds good for the strong electrolytes?
(a) Λ = Λ° as c → 1
(b) Λ = Λ° as c → 0
(c) Λ = Λ° as c → ∞
(d) Λ = Λ° as c → √b
Solution. Answer (from key): (b) Λ = Λ° as c → 0. Λ approaches Λ° at infinite dilution, i.e. as c → 0.
Teacher's Note: Λ = Λ° − b√c.
Exam Note: Λ → Λ° as c → 0.
Passage 6 Question 1. Passage 6 (Kohlrausch's law: Λm°(AxBy) = xλ°Ay+ + yλ°Bx-; α = Λm/Λm°). The ionic conductances of Al3+ and SO42- ions at infinite dilution are x and y ohm-1 cm2 mol-1 respectively. If Kohlrausch's law is valid, then molar conductance of aluminium sulphate at infinite dilution will be:
(a) 3x + 2y
(b) 3y + 2x
(c) 2x + 2y
(d) 3x + 3y
Solution. Answer (from key): (b) 3y + 2x. Al2(SO4)3 → 2Al3+ + 3SO42-: Λ° = 2x + 3y.
Teacher's Note: Multiply each ionic conductance by its number in the formula.
Exam Note: Use subscripts of the ions.
Passage 6 Question 2. Passage 6. The molar conductances at infinite dilution of electrolytes BA and CA are 140 and 120 ohm-1 cm2 mol-1. If the molar conductance at infinite dilution of BX is 198 ohm-1 cm2 mol-1, then at infinite dilution, the molar conductance of CX is:
(a) 178
(b) 198
(c) 218
(d) 130
Solution. Answer (from key): (a) 178. Λ°(CX) = Λ°(CA) + Λ°(BX) − Λ°(BA) = 120 + 198 − 140 = 178.
Teacher's Note: Kohlrausch's law: ions combine additively.
Exam Note: Add CA and BX, subtract BA.
Passage 6 Question 3. Passage 6. The molar conductance of 0.001 M acetic acid is 50 ohm-1 cm2 mol-1. The maximum value of molar conductance of acetic acid is 250 ohm-1 cm2 mol-1. What is the degree of dissociation (α) of acetic acid?
(a) 0.5
(b) 0.2
(c) 0.3
(d) 0.4
Solution. Answer (from key): (b) 0.2. α = Λm/Λm° = 50/250 = 0.2.
Teacher's Note: Ratio of measured to limiting molar conductance.
Exam Note: α = Λ/Λ°.
Passage 6 Question 4. Passage 6. Which of the following solutions will have highest value of the molar conductance of CH3COOH?
(a) 1 M CH3COOH
(b) 0.5 M CH3COOH
(c) 0.3 M CH3COOH
(d) 0.1 M CH3COOH
Solution. Answer (from key): (d) 0.1 M CH3COOH. Molar conductance of a weak electrolyte rises on dilution (α increases), so the most dilute 0.1 M solution has the highest value.
Teacher's Note: Λm rises with dilution.
Exam Note: Most dilute gives highest Λm.
Passage 6 Question 5. Passage 6. The unit of molar conductance of an electrolyte solution will be:
(a) ohm-1 cm2 mol-1
(b) mho cm2 mol-1
(c) S cm2 mol-1
(d) ohm-1 cm-1 mol-1
Solution. Answer (from key): (a), (b) and (c) ohm-1 cm2 mol-1. Λm = κ×1000/M has unit ohm-1 cm2 mol-1, equal to mho cm2 mol-1 and S cm2 mol-1; options (a), (b) and (c) are all correct.
Teacher's Note: ohm⁻¹, mho and S are the same unit.
Exam Note: Three equivalent forms.
Passage 7 Question 1. Passage 7 (the standard electrode potential of hydrogen is 0.0 V; a negative E° means a stronger reducing agent than H+/H2; the metal with greater positive standard reduction potential forms the oxide of greater thermal stability). Given the standard reduction potentials E°K+/K = −2.93 V, E°Ag+/Ag = +0.80 V, E°Hg2+/Hg = 0.79 V, E°Mg2+/Mg = −2.37 V, E°Cr3+/Cr = −0.74 V. The correct increasing order of reducing power is:
(a) K > Mg > Cr > Hg > Ag
(b) Ag > Hg > Cr > Mg > K
(c) Mg > K > Cr > Hg > Ag
(d) Cr > Hg > K > Mg > Ag
Solution. Answer (from key): (a) K > Mg > Cr > Hg > Ag. The lower the reduction potential, the stronger the reductant. The key lists the order K > Mg > Cr > Hg > Ag, which is decreasing reducing power; the wording "increasing" in the question is loose, and (a) is the only consistent ordering by potential.
Teacher's Note: Rank by E°red from most negative to most positive.
Exam Note: Most negative E° is the best reductant.
Passage 7 Question 2. Passage 7. Which of the following oxides will be thermally most stable?
(a) ZnO
(b) MgO
(c) Cu2O
(d) Ag2O
Solution. Answer (from key): (d) Ag2O. The key follows the passage's rule (greater positive E° gives a more stable oxide) and gives Ag2O. Note: in real chemistry MgO is the most thermally stable, so this answer is passage-specific.
Teacher's Note: Passage states: higher E°red metal forms the more stable oxide.
Exam Note: Answer follows the passage's rule.
Passage 7 Question 3. Passage 7. Which of the following reactions is not correct?
(a) Zn + H2SO4 → ZnSO4 + H2
(b) Fe + H2SO4 → FeSO4 + H2
(c) Mg + H2SO4 → MgSO4 + H2
(d) Cu + H2SO4 → CuSO4 + H2
Solution. Answer (from key): (d) Cu + H2SO4 → CuSO4 + H2. Cu lies below hydrogen (E° = +0.34 V) and cannot displace H2 from dilute acid.
Teacher's Note: Only metals above H displace hydrogen.
Exam Note: Cu does not liberate H₂.
Passage 7 Question 4. Passage 7. Which of the following couples will have highest value of emf?
(a) Mg | Mg2+ || Ag+ | Ag
(b) Zn | Zn2+ || Cu2+ | Cu
(c) Zn | Zn2+ || Ag+ | Ag
(d) Cu | Cu2+ || Ag+ | Ag
Solution. Answer (from key): (a) Mg | Mg2+ || Ag+ | Ag. Mg (−2.37 V) with Ag (+0.80 V) gives the largest difference, 3.17 V.
Teacher's Note: Widest gap between the electrodes gives the highest emf.
Exam Note: Pick the most active anode with the nobliest cathode.
Passage 7 Question 5. Passage 7. Which of the following metals will not displace hydrogen from water?
(a) Mg
(b) Zn
(c) Sn
(d) Ag
Solution. Answer (from key): (d) Ag. Ag has a positive reduction potential and does not displace hydrogen from water.
Teacher's Note: Metals below H do not react with water or dilute acids.
Exam Note: Ag is below hydrogen.
Passage 8 Question 1. Passage 8 (a 4.0 molar aqueous solution of NaCl is prepared and 500 mL of this solution is electrolysed, evolving chlorine gas at one of the electrodes; atomic masses Na = 23, Hg = 200; 1 faraday = 96500 C) (IIT 2007). The total number of moles of chlorine gas evolved is:
(a) 0.5
(b) 1.0
(c) 2.0
(d) 3.0
Solution. Answer (from key): (b) 1.0. Moles of NaCl = 4×500/1000 = 2; 2Cl- → Cl2 + 2e-, so 2 mol Cl- gives 1 mol Cl2.
Teacher's Note: Two chloride ions per Cl₂.
Exam Note: Moles Cl₂ = half of NaCl.
Passage 8 Question 2. Passage 8. If the cathode is a Hg electrode, the maximum weight (in g) of amalgam formed from this solution is:
(a) 200
(b) 225
(c) 400
(d) 446
Solution. Answer (from key): (d) 446. Electrolysis gives 2 mol sodium at the cathode, so the amalgam contains 2 mol Na and 2 mol Hg: mass = 2×200 + 2×23 = 446 g.
Teacher's Note: Amalgam composition is NaHg with 1:1 mole ratio.
Exam Note: Add the mass of Na and Hg.
Passage 8 Question 3. Passage 8. The total charge (in coulombs) required for complete electrolysis is:
(a) 24125
(b) 48250
(c) 96500
(d) 193000
Solution. Answer (from key): (d) 193000. 2 mol electrons are required, so charge = 2 F = 193000 C.
Teacher's Note: One electron per Cl⁻.
Exam Note: Q = 2 × 96500.
Self Assessment - Assignment No. 12
Assignment 12 Question 1. The specific conductance (κ) of an electrolyte of 0.1 N concentration is related to equivalent conductance (Λe) by the following formula: (CET J&K 2007)
(a) Λe = κ
(b) Λe = 10κ
(c) Λe = 100κ
(d) Λe = 10000κ
Solution. Answer (from key): (d) Λe = 10000κ. Λe = 1000κ/N = 1000κ/0.1 = 10000κ.
Teacher's Note: Λe = 1000κ/N.
Exam Note: Substitute N = 0.1.
Assignment 12 Question 2. The standard E°red values of A, B and C are +0.68 V, −2.54 V and −0.50 V respectively. The order of their reducing power is: (MHT-CET 2007)
(a) A > B > C
(b) A > C > B
(c) C > B > A
(d) B > C > A
Solution. Answer (from key): (d) B > C > A. The lower the reduction potential, the stronger the reducing agent: B (−2.54) > C (−0.50) > A (+0.68).
Teacher's Note: Rank by increasing E°red.
Exam Note: Lowest E° is best reductant.
Assignment 12 Question 3. In the electrochemical reaction 2Fe3+ + Zn → Zn2+ + 2Fe2+, increasing the concentration of Fe2+: (JEE WB 2007)
(a) increasing the cell emf
(b) increasing the current flow
(c) decrease the cell emf
(d) alter the pH of the solution
Solution. Answer (from key): (c) decrease the cell emf. Fe2+ is a product, so a higher concentration raises Q and lowers the cell emf.
Teacher's Note: Nernst: E = E° − (0.059/n) log Q.
Exam Note: Product increase lowers E.
Assignment 12 Question 4. Fully charged lead storage battery contains 1.5 L of 5 M H2SO4. If 2.5 amp of current is taken from the cell for 965 minutes, then what will be the molarity of remaining H2SO4? Assume volume of battery fluid to be constant:
(a) 4 M
(b) 3.5 M
(c) 2 M
(d) 4.25 M
Solution. Answer (from key): (a) 4 M. Charge = 2.5×965×60 = 144750 C = 1.5 F. Each faraday consumes 1 mol H2SO4, so 1.5 mol used. Initial moles = 7.5; remaining = 6.0 mol in 1.5 L = 4 M.
Teacher's Note: Discharge uses 1 mol H₂SO₄ per faraday.
Exam Note: Convert minutes to seconds.
Assignment 12 Question 5. In a hydrogen-oxygen fuel cell, 67.2 litre of H2 at STP is used in 15 minutes. What is the average current produced?
(a) 549.4 amp
(b) 643.33 amp
(c) 965 amp
(d) 129.8 amp
Solution. Answer (from key): (b) 643.33 amp. 67.2 L H2 = 3 mol = 6 F = 6×96500 = 579000 C. I = Q/t = 579000/900 = 643.33 A.
Teacher's Note: Each mole of H₂ gives 2 F.
Exam Note: Time in seconds.
Assignment 12 Question 6. The cell reaction involving quinhydrone electrode is: quinol (hydroquinone) ⇌ quinone + 2H+ + 2e-; E° = 1.30 volt. What will be the electrode potential at pH = 3?
(a) 1.48 V
(b) 1.20 V
(c) 1.10 V
(d) 1.30 V
Solution. Answer (from key): (a) 1.48 V. E = E° − (0.0591/2) log[H+]2 = 1.30 + 0.0591×3 = 1.48 V.
Teacher's Note: The potential depends on pH through [H⁺]².
Exam Note: Convert [H⁺] to pH.
Assignment 12 Question 7. The standard reduction potential E° for OCl-/Cl- and for Cl-/½Cl2 are 0.86 V and −1.10 volt respectively. The E° value of OCl-/½Cl2 will be:
(a) +1.96 V
(b) −1.96 V
(c) +0.24 V
(d) −0.24 V
Solution. Answer (from key): (d) −0.24 V. OCl- + H2O + e- → Cl- + 2OH- (0.86 V); Cl- → ½Cl2 + e- (−1.10 V). Sum: E° = 0.86 + (−1.10) = −0.24 V (both n = 1).
Teacher's Note: Add half reactions with the same n.
Exam Note: Oxidation potential has opposite sign.
Assignment 12 Question 8. The standard reduction potential for the following two reactions are given: AgCl(s) + e- → Ag(s) + Cl-(aq.), E° = 0.22 V ...(i); Ag+(aq.) + e- → Ag(s), E° = 0.80 V ...(ii). The solubility product of AgCl under standard condition will be:
(a) 1.613×10-5 M2
(b) 1.535×10-8 M2
(c) 3.213×10-10 M2
(d) 1.535×10-10 M2
Solution. Corrected: Answer (d) 1.535×10-10 M2. (key prints (b)) AgCl ⇌ Ag+ + Cl-: E° = 0.22 − 0.80 = −0.58 V, n = 1. log Ksp = −0.58/0.0591 = −9.81, Ksp ≈ 1.5×10-10 M2. Corrected: the printed key gives (b); the correct option is (d) 1.535×10-10 M2.
Teacher's Note: Net dissolution has n = 1, not 2.
Exam Note: Use log K = nE°/0.0591 with n = 1.
Assignment 12 Question 9. The equilibrium constant for the reaction Cu(s) + Cu2+(aq.) ⇌ 2Cu+(aq.), E°Cu2+/Cu = 0.34 V, E°Cu2+/Cu+ = 0.15 V (Given: log 3.72 = 0.571) is:
(a) 3.72×10-6
(b) 3.72×10-5
(c) 3.72×10-7
(d) 3.72×10-8
Solution. Answer (from key): (c) 3.72×10-7. E°(Cu+/Cu) = 2(0.34) − 0.15 = 0.53 V. E°cell = 0.15 − 0.53 = −0.38 V, n = 1: log K = −0.38/0.0591 = −6.43 = −7 + 0.571, so K = 3.72×10-7.
Teacher's Note: Find E°(Cu⁺/Cu) from ΔG values first.
Exam Note: Use log 3.72 = 0.571.
Assignment 12 Question 10. Cations absorb 6.023×1022 electrons for their reduction. How many equivalents of the ion are reduced?
(a) 0.1
(b) 0.01
(c) 0.001
(d) 0.0001
Solution. Answer (from key): (a) 0.1. 6.023×1022 electrons = 0.1 mol e- = 0.1 F = 0.1 equivalent.
Teacher's Note: One mole of electrons reduces one equivalent.
Exam Note: Divide by Avogadro number.
Assignment 12 Question 11. In an electrolytic cell:
(a) anode is positively charged
(b) cathode is negatively charged
(c) oxidation takes place at anode
(d) reduction takes place at cathode
Solution. Answer (from key): (a), (b), (c) and (d) anode is positively charged; cathode is negatively charged; oxidation takes place at anode; reduction takes place at cathode. In an electrolytic cell the anode is positive, the cathode negative, oxidation occurs at the anode and reduction at the cathode: all four are correct.
Teacher's Note: Polarity is opposite to a galvanic cell.
Exam Note: All four statements hold.
Assignment 12 Question 12. One gram equivalent of a substance is liberated at an electrode by:
(a) 6.023×1023 electrons
(b) 96500 C
(c) 1 amp current for 1 second
(d) 1 amp current for 96500 sec
Solution. Answer (from key): (a), (b) and (d) 6.023×1023 electrons; 96500 C; 1 amp current for 96500 sec. One gram equivalent needs 1 F = 96500 C = 6.023×1023 electrons, e.g. 1 A for 96500 s: (a), (b), (d).
Teacher's Note: 1 F = 96500 C = 1 A × 96500 s.
Exam Note: Equate to one faraday.
Assignment 12 Question 13. If 9 gm H2O is electrolysed completely with the current of 50% efficiency then:
(a) 96500 charge is required
(b) 2×96500 C charge is required
(c) 5.6 L of O2 at STP will be formed
(d) 11.2 L of O2 at STP will be formed
Solution. Answer (from key): (b), (c) 2×96500 C charge is required; 5.6 L of O2 at STP will be formed. 9 g water = 0.5 mol, needing 1 F at 100% efficiency, so 2 F = 2×96500 C at 50% efficiency; 0.25 mol O2 = 5.6 L forms. Correct: (b) and (c).
Teacher's Note: Efficiency doubles the charge needed.
Exam Note: Gas formed depends on water electrolysed.
Assignment 12 Question 14. A galvanic cell involves the reaction Zn(s) + 2Ag+(aq.) ⇌ Zn2+(aq.) + 2Ag(s). Select the correct statements among the following:
(a) Zinc is negatively charged
(b) The given redox process is spontaneous
(c) Ag+ + e- → Ag, takes place at anode
(d) Zn(s) → Zn2+ + 2e-, takes place at cathode
Solution. Answer (from key): (a), (b) Zinc is negatively charged; The given redox process is spontaneous. Zn is the anode (negative) and the reaction is spontaneous (E° = 0.80 + 0.76 = 1.56 V). Reduction of Ag+ occurs at the cathode, so (c) and (d) are wrong. Correct: (a) and (b).
Teacher's Note: Anode is negative in a galvanic cell.
Exam Note: Reduction at cathode, oxidation at anode.
Assignment 12 Question 15. Given that E°Ni2+/Ni = −0.25 V, E°Cu2+/Cu = +0.34 V, E°Ag+/Ag = +0.80 V, E°Zn2+/Zn = −0.76 V. Which of the following redox processes will not take place in specified direction?
(a) Ni2+(aq.) + Cu(s) → Ni(s) + Cu2+(aq.)
(b) Cu(s) + 2Ag+(aq.) → Cu2+(aq.) + 2Ag(s)
(c) Cu(s) + 2H+(aq.) → Cu2+(aq.) + H2(g)
(d) Zn(s) + 2H+(aq.) → Zn2+(aq.) + H2(g)
Solution. Answer (from key): (a), (c) Ni2+(aq.) + Cu(s) → Ni(s) + Cu2+(aq.); Cu(s) + 2H+(aq.) → Cu2+(aq.) + H2(g). Cu (+0.34 V) cannot reduce Ni2+ (−0.25 V) or H+ (0.00 V), so (a) and (c) do not occur.
Teacher's Note: Process needs positive E°cell.
Exam Note: Compute E°cell for each.
Assignment 12 Question 16. Statement-1 (Assertion): During the electrolysis of water, two faraday of charge will produce a total of 33.6 litre of gases at STP at electrodes.
Statement-2 (Reason): In the electrolysis of water, two faraday of charge will produce half mole of H2 gas and one fourth mole of O2 gas.
(a) Statement-1 is true; statement-2 is true; statement-2 is a correct explanation for statement-1.
(b) Statement-1 is true; statement-2 is true; statement-2 is not a correct explanation for statement-1.
(c) Statement-1 is true; statement-2 is false.
(d) Statement-1 is false; statement-2 is true.
Solution. Answer (from key): (c) A is true: 2 F gives 1 mol H2 (22.4 L) + 0.5 mol O2 (11.2 L) = 33.6 L. R is false (it quotes half of the actual amounts).
Teacher's Note: Compute gas volumes from 2 F.
Exam Note: 1 mol H₂ and ½ mol O₂.
Assignment 12 Question 17. Statement-1 (Assertion): Aqueous solution of CuSO4 turns colourless on complete electrolysis using platinum electrode.
Statement-2 (Reason): CuSO4 is converted to Cu(OH)2 on electrolysis.
(a) Statement-1 is true; statement-2 is true; statement-2 is a correct explanation for statement-1.
(b) Statement-1 is true; statement-2 is true; statement-2 is not a correct explanation for statement-1.
(c) Statement-1 is true; statement-2 is false.
(d) Statement-1 is false; statement-2 is true.
Solution. Answer (from key): (c) A is true (Cu2+ is removed, leaving colourless H2SO4); R is false: copper is deposited, not converted to Cu(OH)2.
Teacher's Note: Blue Cu²⁺ is plated out as Cu metal.
Exam Note: R is false.
Assignment 12 Question 18. Statement-1 (Assertion): Sodium ions are discharged at a mercury cathode in preference to hydrogen ion.
Statement-2 (Reason): Na+ is stronger reducing agent than H+.
(a) Statement-1 is true; statement-2 is true; statement-2 is a correct explanation for statement-1.
(b) Statement-1 is true; statement-2 is true; statement-2 is not a correct explanation for statement-1.
(c) Statement-1 is true; statement-2 is false.
(d) Statement-1 is false; statement-2 is true.
Solution. Answer (from key): (b) Per the key both are accepted as true statements but R is not the explanation; the real reason is the high hydrogen overvoltage on mercury (Na+ is an ion, not a reducing agent).
Teacher's Note: Overvoltage of H₂ on Hg lets Na⁺ discharge.
Exam Note: Overvoltage explains the A.
Assignment 12 Question 19. Statement-1 (Assertion): KCl and NH4Cl cannot be used in salt bridge of a cell containing Ag+, Hg22+ and Tl+ ions.
Statement-2 (Reason): Cell will be destroyed due to precipitation of metal chlorides.
(a) Statement-1 is true; statement-2 is true; statement-2 is a correct explanation for statement-1.
(b) Statement-1 is true; statement-2 is true; statement-2 is not a correct explanation for statement-1.
(c) Statement-1 is true; statement-2 is false.
(d) Statement-1 is false; statement-2 is true.
Solution. Answer (from key): (a) Both true and R explains A: Ag+, Hg22+ and Tl+ form insoluble chlorides that block the cell.
Teacher's Note: Salt bridge ions must not react with cell ions.
Exam Note: Chloride precipitates the cations.
Assignment 12 Question 20. Statement-1 (Assertion): The voltage of mercury cell remains constant for its life time.
Statement-2 (Reason): Overall cell reaction does not involve any ion.
(a) Statement-1 is true; statement-2 is true; statement-2 is a correct explanation for statement-1.
(b) Statement-1 is true; statement-2 is true; statement-2 is not a correct explanation for statement-1.
(c) Statement-1 is true; statement-2 is false.
(d) Statement-1 is false; statement-2 is true.
Solution. Answer (from key): (a) Both true and R explains A: Zn + HgO → ZnO + Hg involves no change in ion concentration, so emf stays constant.
Teacher's Note: Constant electrolyte composition gives constant emf.
Exam Note: No ion in the net reaction.
Assignment 12 Question 21. Statement-1 (Assertion): In alkaline version of dry cell, NH4Cl is replaced by KOH.
Statement-2 (Reason): Zinc container does not undergo corrosion in alkaline medium.
(a) Statement-1 is true; statement-2 is true; statement-2 is a correct explanation for statement-1.
(b) Statement-1 is true; statement-2 is true; statement-2 is not a correct explanation for statement-1.
(c) Statement-1 is true; statement-2 is false.
(d) Statement-1 is false; statement-2 is true.
Solution. Answer (from key): (a) Both true and R explains A: KOH avoids the acidic NH4Cl that corrodes the zinc container.
Teacher's Note: Alkaline medium prevents zinc corrosion.
Exam Note: Acid corrodes Zn; alkali does not.
Assignment 12 Question 22. Match the Column-I with Column-II:
| Column-I | Column-II |
|---|---|
| (a) Nickel-Cadmium cell | (p) Used in auto vehicles |
| (b) Lithium battery | (q) Secondary cell |
| (c) H2 - O2 cell | (r) Fuel cell |
| (d) Lead storage battery | (s) Used in Apollo space craft |
Solution. Answer (from key): (a-q), (b-q), (c-r,s), (d-p,q). Ni-Cd and lithium cells are rechargeable (secondary); the H2-O2 fuel cell is a fuel cell used in Apollo spacecraft; the lead storage battery is a secondary cell used in automobiles.
Teacher's Note: Classify each cell by type and use.
Exam Note: Match each cell to every property.
Assignment 12 Question 23. Match the Column-I with Column-II:
| Column-I | Column-II |
|---|---|
| (a) Specific conductance, κ | (p) Λmc/Λm∞ |
| (b) Molar conductance, Λm | (q) Decreases with dilution |
| (c) Resistance of electrolyte solution, R | (r) Increases with dilution |
| (d) Degree of ionization of weak electrolyte, α | (s) Increases with increase in the distance between parallel plates |
Solution. Answer (from key): (a-q), (b-r), (c-q,s), (d-p,r). κ falls on dilution; Λm rises; R rises as plate distance increases but falls... as printed the key pairs R with (q) and (s); α = Λmc/Λm∞ and rises on dilution.
Teacher's Note: Dilution lowers κ and raises Λ and α.
Exam Note: Several options can match one item.
Assignment 12 Question 24. Match the Column-I with Column-II:
| Column-I | Column-II |
|---|---|
| (a) Concentration cell | (p) Fe is oxidised by Ni2O3 |
| (b) Edison cell | (q) Zinc anode |
| (c) Mercury cell | (r) HgO cathode |
| (d) Dry cell | (s) E° = 0 |
Solution. Answer (from key): (a-s), (b-p), (c-q,r), (d-q). A concentration cell has E° = 0; the Edison cell oxidises Fe with Ni2O3; the mercury cell has a zinc anode and HgO cathode; the dry cell has a zinc anode.
Teacher's Note: Link each cell to its electrodes.
Exam Note: Concentration cell: E° = 0.
Assignment 12 Question 25. Redox reactions: given I2 + 2e- → 2I-, E° = 0.54; Cl2 + 2e- → 2Cl-, 1.36; Mn3+ + e- → Mn2+, 1.50; Fe3+ + e- → Fe2+, 0.77; O2 + 4H+ + 4e- → 2H2O, 1.23 V (IIT 2007). Among the following, identify the correct statement:
(a) Chloride ion is oxidised by O2
(b) Fe2+ is oxidised by iodine
(c) Iodide ion is oxidised by chlorine
(d) Mn2+ is oxidised by chlorine
Solution. Answer (from key): (c) Iodide ion is oxidised by chlorine. Cl2 (1.36 V) is a stronger oxidant than I2 (0.54 V), so it oxidises I-.
Teacher's Note: Species with higher E°red oxidises species with lower E°red.
Exam Note: Higher E°red oxidises the lower.
Assignment 12 Question 26. (Same data.) While Fe3+ is stable, Mn3+ is not stable in acid solution because:
(a) O2 oxidises Mn2+ to Mn3+
(b) O2 oxidises both Mn2+ and Fe2+
(c) Fe3+ oxidises H2O to O2
(d) Mn3+ oxidises H2O to O2
Solution. Answer (from key): (d) Mn3+ oxidises H2O to O2. E°(Mn3+/Mn2+) = 1.50 V exceeds E°(O2/H2O) = 1.23 V, so Mn3+ oxidises water to O2.
Teacher's Note: Compare 1.50 V with 1.23 V for water oxidation.
Exam Note: Higher E°red oxidises the lower.
Step-by-Step OP Tandon Solutions for JEE Math
Access JEE Mathematics Solutions
Explore reliable mathematical solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 12 Electrochemistry Part 3 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Concept-Driven Math Answers
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.