OP Tandon Solutions for JEE Chemistry: Chapter 12 Electrochemistry
Review structured textbook solutions for JEE Chemistry Chapter 12 Electrochemistry prepared by OP Tandon. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Practice JEE Chemistry Solutions: Chapter 12 Electrochemistry
Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Chapter 12 Electrochemistry - Part 2 (OP Tandon Physical Chemistry, pages 805-836)
Some Solved Examples
Example 43. A cell contains two hydrogen electrodes. The negative electrode is in contact with a solution of 10-6 M hydrogen ions. The emf of the cell is 0.118 volt at 25°C. Calculate the concentration of hydrogen ions at the positive electrode.
Solution. Cell: Pt | H2 (1 atm) | H+ (10-6 M) || H+ (C M) | H2 (1 atm) | Pt. Anode (−ve): H2 → 2H+ + 2e-; cathode (+ve): 2H+ + 2e- → H2.
Ecell = (0.0591/2) log [H+]cathode2/(10-6)2, so 0.118 = 0.0591 log ([H+]/10-6).
log ([H+]/10-6) = 0.118/0.0591 = 2, so [H+]/10-6 = 102.
[H+]cathode = 10-6 × 102 = 10-4 M.
Teacher's Note: Concentration cell: emf comes only from the ratio of H+ concentrations; n = 1 after halving the square.
Exam Note: Write Nernst with the square, then simplify; show the ratio step.
Example 44. The emf of the cell Ag | AgI in 0.05 M KI || Sol. NH4NO3 | 0.05 M AgNO3 | Ag is 0.788 volt at 25°C. The activity coefficient of KI and silver nitrate in the above solution is 0.90 each. Calculate (i) the solubility product of AgI and (ii) the solubility of AgI in pure water at 25°C.
Solution. Ag+ concentration (activity) on the AgNO3 side = 0.9 × 0.05 = 0.045 M. Similarly I- in 0.05 M KI = 0.05 × 0.9 = 0.045 M.
Ecell = 0.0591 log [Ag+]RHS/[Ag+]LHS = 0.0591 log (0.045/[Ag+]LHS)
log (0.045/[Ag+]LHS) = 0.788/0.0591 = 13.33, so [Ag+]LHS = 0.045/(2.138 × 1013) = 2.105 × 10-15 M.
(i) Ksp of AgI = [Ag+][I-] = 2.105 × 10-15 × 0.045 = 9.472 × 10-17.
(ii) Solubility of AgI = √Ksp = √(9.472 × 10-17) = 9.732 × 10-9 mol L-1 = 9.732 × 10-9 × 143.5 = 1.396 × 10-6 g L-1.
Teacher's Note: The LHS electrode is a saturated AgI half-cell; its tiny [Ag+] is found from the measured emf.
Exam Note: Use activities (0.9 factor), not raw concentrations.
Example 45. The observed emf of the cell, Pt | H2 (1 atm) | H+ (3 × 10-4 M) || H+ (M1) | H2 (1 atm) | Pt is 0.154 V. Calculate the value of M1 and pH of cathodic solution.
Solution. Ecell = 0.0591 log M1/(3 × 10-4)
log M1/(3 × 10-4) = 0.154/0.0591 = 2.6058, so M1/(3 × 10-4) = 4.034 × 102
M1 = 4.034 × 102 × 3 × 10-4 = 0.121 M
pH = −log [H+] = −log 0.121 = 0.917.
Teacher's Note: Hydrogen concentration cell with n = 1 for H+; invert the Nernst log to get the unknown concentration.
Exam Note: Take antilog carefully; pH is negative log of M1.
Example 46. Calculate the emf of the following cell at 25°C: Pt, H2 (2 atm) | HCl | H2 (10 atm), Pt
Solution. Ecell = (0.0591/2) log (P1/P2) = (0.0591/2) log (2/10) = −0.0206 volt.
Teacher's Note: Gas-pressure concentration cell: E = (0.0591/n) log(P at anode / P at cathode), n = 2.
Exam Note: Negative emf means the cell as written is not spontaneous.
Example 47. In a fuel cell H2 and O2 react to produce electricity. In the process H2 gas is oxidised at the anode and O2 is reduced at the cathode. If 67.2 litre of H2 at NTP reacts in 15 minute, what is the average current produced? If the entire current is used for electro-deposition of Cu from Cu2+, how many g of Cu are deposited?
Solution. Anode: H2(g) → 2H+ + 2e- (1 mole = 22.4 L gives 2 mole e- = 2F).
67.2 L of H2 corresponds to (2 × 96500/22.4) × 67.2 coulomb. Time = 15 × 60 s.
Average current = (2 × 96500 × 67.2)/(22.4 × 15 × 60) = 643.3 amp.
Mass of Cu deposited by (2 × 96500/22.4) × 67.2 coulomb = (63.5/(2 × 96500)) × (2 × 96500 × 67.2)/22.4 = 190.5 g.
Teacher's Note: 67.2 L at NTP is 3 mol H2, so 6 F of charge; the same charge deposits 3 mol Cu.
Exam Note: State moles of electrons first; then I = Q/t.
Example 48. Neglecting the liquid-liquid junction potential, calculate the emf of the following cell at 25°C: H2 (1 atm) | 0.5 M HCOOH || 1 M CH3COOH | (1 atm) H2. Ka for HCOOH and CH3COOH are 1.77 × 10-4 and 1.8 × 10-5 respectively.
Solution. [H+] in HCOOH = √(C × Ka) = √(0.5 × 1.77 × 10-4) = 0.9407 × 10-2 M
[H+] in CH3COOH = √(1 × 1.8 × 10-5) = 4.2426 × 10-3 M
Ecell = 0.0591 log [H+]RHS/[H+]LHS = 0.0591 log (4.2426 × 10-3/0.9407 × 10-2) = −0.0204 volt.
Teacher's Note: Weak-acid concentration cell: first find [H+] by √(CKa) in each half-cell.
Exam Note: Put the cathode (RHS) concentration in the numerator.
Example 49. During the discharge of a lead storage battery, density of H2SO4 fell from 1.294 to 1.139 g/mL. Sulphuric acid of density 1.294 is 39% H2SO4 by weight and that of density 1.139 g/mL is 20% H2SO4 by weight. The battery holds 3.5 litre of the acid and volume remains practically constant during discharge. Calculate ampere-hour of which the battery must have been used. The charging and discharging reactions are: Pb + SO42- → PbSO4 + 2e- (charging); PbO2 + 4H+ + SO42- + 2e- → PbSO4 + 2H2O (discharging).
Solution. Weight of solution before discharge = 3500 × 1.294 = 4529 g; H2SO4 = (39/100) × 4529 = 1766.31 g.
Weight of solution after discharge = 3500 × 1.139 = 3986.5 g; H2SO4 = (20/100) × 3986.5 = 797.3 g.
Loss of H2SO4 = 1766.31 − 797.3 = 969.01 g.
From Faraday's first law, W = (Q × E)/96500: 969.01 = (Q × 98)/96500, so Q = 954178.21 coulomb.
Ampere-hour = 954178.21/3600 = 265.04 ampere-hour.
Teacher's Note: Mass of acid consumed gives charge via equivalent mass 98 (2 equivalents per mole).
Exam Note: Use equivalent mass 98, not 49 or 98 per mole of e-.
Miscellaneous Numerical Examples
Example 1. Anodic oxidation of ammonium hydrogen sulphate produces ammonium persulphate. NH4HSO4 → NH4SO4- + H+; 2NH4SO4- → (NH4)2S2O8 + 2e- (anodic oxidation); 2H+ + 2e- → H2 (cathodic reduction). Hydrolysis of ammonium persulphate forms H2O2: (NH4)2S2O8 + 2H2O → 2NH4HSO4 + H2O2. Current efficiency in electrolytic process is 60%. Calculate the amount of current required to produce 85 g of H2O2 per hour. Hydrolysis reaction shows 100% yield.
Solution. (NH4)2S2O8 (228 g) gives H2O2 (34 g). So 85 g H2O2 needs (228/34) × 85 = 570 g (NH4)2S2O8.
Equivalent mass of (NH4)2S2O8 = 228/2 = 114.
W = (I t E)/96500: 570 = (I × 3600 × 114)/96500, so I = 134.0277 ampere.
With 60% current efficiency, actual current = (100/60) × 134.0277 = 223.379 ampere.
Teacher's Note: Chain: H2O2 to persulphate by stoichiometry, then Faraday's law, then divide by efficiency.
Exam Note: Divide by 0.6, not multiply, for actual current.
Example 2. In a zinc manganese dioxide dry cell, the anode is made up of zinc and cathode of a carbon rod surrounded by a mixture of MnO2, carbon, NH4Cl and ZnCl2 in aqueous base. The cathodic reaction may be represented as: 2MnO2(s) + Zn2+ + 2e- → ZnMn2O4(s). Let there be 8 g MnO2 in the cathodic compartment. How many days will the dry cell continue to give a current of 4 × 10-3 ampere?
Solution. When MnO2 is used up in the cathodic process, the dry cell stops producing current. Oxidation state of Mn changes from +4 to +3.
Equivalent mass of MnO2 = molecular mass/change in oxidation state = 87/1 = 87.
W = (I t E)/96500: 8 = (4 × 10-3 × t × 87)/96500, so t = 2218390.8 s = 2218390.8/(3600 × 24) = 25.675 day.
Teacher's Note: Each MnO2 gains one electron (Mn +4 to +3), so equivalent mass is 87.
Exam Note: Convert seconds to days at the end.
Example 3. Ten gram of a fairly concentrated solution of cupric sulphate is electrolysed using 0.01 faraday of electricity. Calculate: (i) The mass of the resulting solution. (ii) The number of equivalents of acid or alkali in the resulting solution.
Solution. Cathode: Cu2+ + 2e- → Cu. Anode: 2OH- → H2O + ½O2 + 2e-.
Mass of copper deposited by 0.01 F = 0.01 × 31.75 = 0.3175 g (31.75 is the equivalent mass of Cu2+). Mass of oxygen evolved by 0.01 F = 0.01 × 8 = 0.08 g.
(i) Total loss from solution = 0.3175 + 0.08 = 0.3975 g. Mass of resulting solution = 10 − 0.3975 = 9.6025 g.
(ii) After deposition of Cu2+ and OH- ions, H2SO4 prevails in the solution. 0.01 F gives 0.01 equivalent of acid.
Teacher's Note: Electrolysis of CuSO4 leaves H2SO4; 1 F removes 1 equivalent each of Cu and O.
Exam Note: Use equivalent masses 31.75 (Cu) and 8 (O).
Example 4. A current of 40 microampere is passed through silver nitrate solution for 16 minutes using platinum electrodes. 50% of the cathode is occupied by a single atom thick silver layer. Calculate the total surface area of the cathode if one silver atom occupies 5.5 × 10-16 cm2 surface area.
Solution. By Faraday's first law, W = (I t E)/96500 = (40 × 10-6 × 60 × 16 × 108)/96500 = 42.976 × 10-6 g.
Number of deposited Ag atoms = (42.976 × 10-6/108) × 6.023 × 1023 = 2.3967 × 1017.
Surface occupied = atoms × area of one atom = 2.3967 × 1017 × 5.5 × 10-16 = 131.818 cm2.
Since deposited silver occupies 50% of the cathode, total surface area = 2 × 131.818 = 263.636 cm2.
Teacher's Note: Charge gives mass, mass gives atoms, atoms times atomic area gives covered area.
Exam Note: Do not forget the factor 2 for the 50% coverage.
Example 5. A pin of 2 cm length and 0.4 cm diameter was placed in AgNO3 solution through which a 0.2 ampere current was passed for 10 minute to deposit silver on the pin. The pin was used by a surgeon in lachrymal duct operation. The density of silver and electrochemical equivalent are 1.05 × 104 kg m-3 and 1.118 × 10-6 kg/coulomb respectively. What is the thickness of silver deposited on the pin? Assume that the tip of the pin contains negligible mass of silver.
Solution. From Faraday's first law, W = Z I t = 1.118 × 10-6 × 0.2 × 10 × 60 = 1.34 × 10-4 kg.
V = W/d = 1.34 × 10-4/(1.05 × 104) = 1.277 × 10-8 m3 = 1.277 × 10-2 cm3 ...(i)
Surface area of pin = 2πrh = 2 × 3.14 × 0.2 × 2 = 2.512 cm2. Treat it as a rectangle of length h and breadth 2πr; let thickness be d cm: volume = 2.512 × d cm3 ...(ii)
From (i) and (ii): 1.277 × 10-2 = 2.512 × d, so d = 0.5083 × 10-2 cm = 5.083 × 10-5 m.
Teacher's Note: Unroll the coating into a rectangle: volume = lateral area × thickness.
Exam Note: Keep units consistent: kg, m3 converted to cm3.
Example 6. The specific conductivity of a saturated solution of silver chloride is 2.30 × 10-6 mho cm-1 at 25°C. Calculate the solubility of silver chloride at 25°C if λAg+ = 61.9 mho cm2 mol-1 and λCl- = 76.3 mho cm2 mol-1.
Solution. Let the solubility of AgCl be s gram mole per litre; dilution = 1000/s.
Λ∞AgCl = λAg+ + λCl- = 61.9 + 76.3 = 138.2 mho cm2 mol-1.
Sp. conductivity × dilution = 138.2, so 2.30 × 10-6 × 1000/s = 138.2
s = 2.30 × 10-3/138.2 = 1.66 × 10-5 mol per litre = 1.66 × 10-5 × 143.5 g L-1 = 2.382 × 10-3 g L-1.
Teacher's Note: Sparingly soluble salt: assume infinite dilution so Λ = Λ∞, then Λ = 1000κ/s.
Exam Note: Quote s in mol/L, then convert to g/L.
Example 7. Resistance of a solution (A) is 50 ohm and that of solution (B) is 100 ohm, both solutions being taken in the same conductivity cell. If equal volumes of solutions (A) and (B) are mixed, what will be the resistance of the mixture, using the same cell? Assume that there is no increase in the degree of dissociation of (A) and (B) on mixing.
Solution. Let κ1 and κ2 be specific conductances of A and B and cell constant y. Specific conductance = conductance × cell constant.
For A, κ1 = (1/50) × y; for B, κ2 = (1/100) × y.
On mixing equal volumes the volume doubles, so specific conductance of mixture = (κ1 + κ2)/2 = (1/R) × y.
(1/2)[y/50 + y/100] = y/R, so 1/100 + 1/200 = 1/R, giving R = 200/3 = 66.66 ohm.
Teacher's Note: Equal-volume mixing halves each conductivity, so mixture κ is the mean of κ1 and κ2.
Exam Note: Mixture conductivity is the average, not the sum.
Example 8. A big irregular shaped vessel contained water, specific conductance of which was 2.56 × 10-5 mho cm-1. 500 g of NaCl was then added to the water and the specific conductance after the addition of NaCl was found to be 3.1 × 10-5 mho cm-1. Find the capacity of the vessel if it was fully filled with water. (Λ∞ NaCl = 149.9 ohm-1 cm2 eq-1)
Solution. Let the volume of the vessel be V mL. Volume containing 1 equivalent = V/(500/58.5) = V/8.547 mL.
Specific conductance of NaCl = 3.1 × 10-5 − 2.56 × 10-5 = 0.54 × 10-5 mho cm-1.
Λ = κ × volume containing 1 equivalent of electrolyte ...(1)
For very dilute solution (big vessel fully filled), Λ = Λ∞ = 149.9. So 149.9 = 0.54 × 10-5 × V/8.547, giving V = 237258.38 L.
Teacher's Note: Subtract the water's own conductance to isolate NaCl's contribution.
Exam Note: Convert mL to L at the end.
Example 9. A 0.05 N solution of a salt occupying a volume between two platinum electrodes separated by a distance of 1.72 cm and having an area of 4.5 cm2 has a resistance of 250 ohm. Calculate the equivalent conductance of the solution.
Solution. Specific conductivity κ = conductance × cell constant = (1/R) × (l/A) = (1/250) × (1.72/4.5) = 1.5288 × 10-3 ohm-1 cm-1.
Λe = κ × 1000/N = 1.5288 × 10-3 × 1000/0.05 = 30.58 ohm-1 cm2 eq-1.
Teacher's Note: Cell constant l/A times conductance 1/R gives κ; then Λ = 1000κ/N.
Exam Note: Normality, not molarity, in the 1000/N factor.
Example 10. At 18°C, the mobilities of NH4+ and ClO4- ions are 6.6 × 10-4 and 5.7 × 10-4 cm2 volt-1 sec-1 at infinite dilution. Calculate the equivalent conductance of ammonium chlorate solution.
Solution. Λ∞NH4ClO4 = λ∞NH4+ + λ∞ClO4- = (U∞NH4+ + U∞ClO4-) F
= (6.6 × 10-4 + 5.7 × 10-4) × 96500 = 118.69 ohm-1 cm2 eq-1.
Teacher's Note: Ionic conductance = ionic mobility × Faraday constant.
Exam Note: Add both ion mobilities, then multiply by 96500.
Example 11. For the cell reaction, Mg | Mg2+ (aq.) || Ag+ (aq.) | Ag, calculate the equilibrium constant at 25°C and maximum work that can be obtained by operating the cell. E°Mg2+/Mg = −2.37 volt and E°Ag+/Ag = +0.80 volt
Solution. E°cell = 0.80 + 2.37 = 3.17 volt.
log Kc = nE°cell/0.0591 = (2 × 3.17)/0.0591 = 107.2758, so Kc = 1.89 × 10107.
−ΔG = maximum work = nFE° = 2 × 96500 × 3.17 = 611810 J.
Teacher's Note: Net reaction Mg + 2Ag+ has n = 2; K from log K = nE°/0.0591, work from nFE°.
Exam Note: Use n = 2, not 1, for both K and work.
Example 12. Zinc granules are added in excess to 500 mL of 1.0 M nickel nitrate solution at 25°C until the equilibrium is reached. If the standard reduction potentials of Zn2+/Zn and Ni2+/Ni are −0.75 and −0.24 volt respectively, find out the concentration of Ni2+ ions in solution at equilibrium. (IIT 1991)
Solution. Reaction: Zn(s) + Ni2+(aq.) ⇌ Zn2+(aq.) + Ni(s). Cell: Zn(s) | Zn2+(aq.) || Ni2+(aq.) | Ni(s); E°cell = −0.24 + 0.75 = 0.51 volt.
log Keq = nFE°/(2.303RT) = nE°/0.0591 = (2 × 0.51)/0.0591 = 17.25, so Keq = 1.78 × 1017.
Let x be the concentration of Ni2+ reduced at equilibrium: Keq = [Zn2+]/[Ni2+] = x/(1 − x) = 1.78 × 1017. So x ≈ 1.0 M, and (1 − x) = [Ni2+] = 1.0/(1.78 × 1017) = 5.6 × 10-18 M.
Teacher's Note: Huge K means reaction goes essentially to completion; [Ni2+] = 1/K.
Exam Note: Assume x ≈ 1.0 because K is enormous.
Example 13. The standard reduction potential of Cu2+/Cu and Ag+/Ag electrodes are 0.337 and 0.799 volt respectively. Construct a galvanic cell using these electrodes so that its standard emf is positive. For what concentration of Ag+ will the emf of the cell at 25°C be zero if concentration of Cu2+ is 0.01 M? (IIT 1990)
Solution. The standard emf is positive if Cu/Cu2+ is anode and Ag+/Ag is cathode: Cu | Cu2+ || Ag+ | Ag. Cell reaction: Cu + 2Ag+ → Cu2+ + 2Ag.
E°cell = oxid. potential of anode + red. potential of cathode = −0.337 + 0.799 = 0.462 volt.
Nernst: Ecell = E°cell − (0.0591/2) log [Cu2+]/[Ag+]2. When Ecell = 0: log [Cu2+]/[Ag+]2 = (0.462 × 2)/0.0591 = 15.6345, so [Cu2+]/[Ag+]2 = 4.3102 × 1015.
[Ag+]2 = 0.01/(4.3102 × 1015) = 2.320 × 10-18, so [Ag+] = 1.523 × 10-9 M.
Teacher's Note: Emf zero means equilibrium; solve Nernst for [Ag+] with n = 2.
Exam Note: Square the Ag+ term in the quotient.
Example 14. The standard reduction potential for the half-cell having reaction, NO3-(aq.) + 2H+(aq.) + e- ⇌ NO2(g) + H2O is 0.78 volt. (i) Calculate the reduction potential in 8 M H+. (ii) What will be the reduction potential of the half-cell in a neutral solution? Assume all other species to be at unit concentration. (IIT 1990)
Solution. Corrected: the reaction involves n = 1 electron (the book used n = 2, which is wrong).
Ered = E°red + (0.0591/n) log [H+]2, with n = 1.
(i) Ered = 0.78 + 0.0591 × log 82 = 0.78 + 0.0591 × 2 × 0.9031 = 0.78 + 0.1067 = 0.887 volt.
(ii) Neutral solution: [H+] = 10-7 M. Ered = 0.78 + 0.0591 × log (10-7)2 = 0.78 − 0.0591 × 14 = 0.78 − 0.827 = −0.047 volt.
Teacher's Note: One electron is transferred; H+ appears squared inside the log, so factor is 0.0591 × 2 log[H+].
Exam Note: Count electrons from the half-reaction, not from H+ coefficient.
Example 15. The emf of a cell corresponding to the reaction, Zn + 2H+(aq.) → Zn2+ (0.1 M) + H2(g) 1 atm is 0.28 volt at 25°C. Write the half-cell reactions and calculate the pH at the hydrogen electrode. E°Zn2+/Zn = −0.76 volt and E°H+/H2 = 0
Solution. E°cell = 0.76 volt. Anode: Zn → Zn2+ + 2e-; cathode: 2H+ + 2e- → H2.
Nernst: Ecell = E°cell − (0.0591/2) log ([Zn2+][H2]/[H+]2)
0.28 = 0.76 − (0.0591/2) log (0.1 × 1/[H+]2), so log (0.1/[H+]2) = (2 × 0.48)/0.0591 = 16.2436.
log 0.1 − log [H+]2 = 16.2436, i.e. −1 + 2pH = 16.2436, so 2pH = 17.2436 and pH = 8.6218.
Teacher's Note: Solid Zn and H2 at 1 atm drop out; only [Zn2+] and [H+]2 remain in Q.
Exam Note: Remember log 0.1 = −1 when isolating pH.
Example 16. Calculate the solubility product constant of AgI from the following values of standard electrode potentials. E°Ag+/Ag = 0.80 volt and E°I-/AgI/Ag = −0.15 volt at 25°C.
Solution. Solubility product of AgI = [Ag+][I-]. Half-reactions: Ag → Ag+ + e- (anode, oxidation); AgI + e- → Ag + I- (cathode, reduction). Cell reaction: AgI → Ag+ + I-.
Ecell = E°cell − (0.0591/1) log ([Ag+][I-]/[AgI]). At equilibrium Ecell = 0 and [AgI] = 1, so log [Ag+][I-] = E°cell/0.0591.
E°cell = −0.80 − 0.15 = −0.95 volt. log Ksp = −0.95/0.0591 = −16.0744, so Ksp of AgI = 8.4 × 10-17.
Teacher's Note: Combine Ag oxidation with AgI reduction: the net reaction is AgI dissolving, so E° gives Ksp.
Exam Note: Sign of E°cell is negative; Ksp must come out below 1.
Example 17. The standard reduction potential of Ag+/Ag electrode at 298 K is 0.799 volt. Given for AgI, Ksp = 8.7 × 10-17, evaluate the potential of the Ag+/Ag electrode in a saturated solution of AgI. Also calculate the standard reduction potential of the I-/AgI/Ag electrode. (IIT 1994)
Solution. In the saturated solution of AgI: AgI + e- → Ag + I- (cathode); Ag → Ag+ + e- (anode); net AgI → Ag+ + I-.
EAg+/Ag = E°Ag+/Ag + 0.0591 log [Ag+]. [Ag+][I-] = Ksp = [Ag+]2 = 8.7 × 10-17, so [Ag+] = √(8.7 × 10-17) = 9.3 × 10-9 M.
EAg+/Ag = 0.799 + 0.0591 log (9.3 × 10-9) = 0.799 − 0.0591 × 8.03 = 0.324 volt.
E°cell = 0.0591 log Ksp(AgI) = 0.0591 log (8.7 × 10-17) = −0.95 volt.
E°cell = oxid. pot. of anode + red. pot. of cathode, so red. pot. of cathode E°I-/AgI/Ag = −0.95 − (−0.799) = −0.151 volt.
Teacher's Note: Saturated AgI fixes [Ag+] = √Ksp, which shifts the Nernst potential; E°cell = 0.0591 log Ksp.
Exam Note: Use [Ag+] = √Ksp for a pure saturated solution.
Example 18. Calculate the pH of the following half-cells solutions: (a) Pt, H2 (1 atm) | H+ (HCl); E = 0.25 volt (b) Pt, H2 (1 atm) | H+ (H2SO4); E = 0.3 volt
Solution. (a) H2 → 2H+ + 2e-. EH2/H+ = E° − (0.0591/2) log ([H+]2/PH2) = 0.0 − 0.0591 log [H+]/1, so 0.25 = 0.0591 pH and pH = 0.25/0.0591 = 4.23.
(b) Similarly 0.3 = 0.0591 pH, so pH = 0.3/0.0591 = 5.076.
Teacher's Note: E given is the oxidation potential of the hydrogen electrode: E = 0.0591 pH at 1 atm H2.
Exam Note: Hydrogen electrode: E = −0.0591 pH as reduction potential.
Example 19. The emf of the cells obtained by combining zinc and copper electrodes of the Daniell cell with calomel electrodes are 1.083 volt and −0.018 volt respectively at 25°C. If the reduction potential of normal calomel electrode is + 0.28 volt, find the emf of the Daniell cell.
Solution. For the cell Zn electrode || Calomel electrode: Ecell = oxid. pot. of Zn electrode + red. pot. of calomel electrode, so oxid. pot. of Zn = 1.083 − 0.28 = 0.803 volt.
For Cu electrode || Calomel electrode: oxid. pot. of Cu = −0.018 − 0.28 = −0.298 volt.
Daniell cell, Zn electrode || Cu electrode: Ecell = oxid. pot. of Zn + red. pot. of Cu = 0.803 + 0.298 = 1.101 volt.
Teacher's Note: Use the calomel electrode as a reference to extract each metal's electrode potential, then recombine.
Exam Note: Reduction potential of Cu is the negative of its oxidation potential.
Example 20. The Edison storage cell is represented as: Fe(s) | FeO(s) | KOH(aq.) | Ni2O3(s) | Ni(s). The half-cell reactions are: Ni2O3(s) + H2O(l) + 2e- → 2NiO(s) + 2OH-; E° = +0.40 volt. FeO(s) + H2O(l) + 2e- → Fe(s) + 2OH-; E° = −0.87 volt. (a) What is the cell reaction? (b) What is the emf of the cell? How does it depend on the concentration of KOH? (c) What is the maximum amount of energy that can be obtained from one mole of Ni2O3? (IIT 1994)
Solution. Actual half reactions: Fe + 2OH- → FeO + H2O + 2e- (anode); Ni2O3 + H2O + 2e- → 2NiO + 2OH- (cathode).
(a) Cell reaction: Fe + Ni2O3 → FeO + 2NiO.
(b) Ecell = E°cell − (0.0591/2) log ([NiO]2[FeO]/([Fe][Ni2O3])) = E°cell, since all are solids (ratio = 1). Ecell = 0.87 + 0.40 = 1.27 volt. The emf of the cell is independent of KOH concentration.
(c) Maximum energy = nFE° = 2 × 96500 × 1.27 = 245.11 kJ.
Teacher's Note: OH- and H2O cancel in the net reaction, so emf does not depend on [KOH].
Exam Note: Pure solids have activity 1; KOH cancels out.
Example 21. The normal oxidation potential of zinc referred to the standard hydrogen electrode is 0.76 volt and that of copper is −0.34 volt at 25°C. When excess of zinc is added to a solution of copper sulphate, the zinc displaces copper till equilibrium is reached. What is the ratio of concentration of Zn2+ to Cu2+ ions at equilibrium?
Solution. Reaction: Zn + CuSO4 → Cu + ZnSO4, i.e. Zn + Cu2+ → Cu + Zn2+. E°cell = 0.76 + 0.34 = 1.10 volt.
Ecell = E°cell − (0.0591/2) log [Zn2+]/[Cu2+]. At equilibrium Ecell = 0, so log [Zn2+]/[Cu2+] = (2 × 1.10)/0.0591 = 37.225.
[Zn2+]/[Cu2+] = 1.679 × 1037 : 1.
Teacher's Note: At equilibrium E = 0, so the concentration ratio equals the equilibrium constant, 10(nE°/0.0591).
Exam Note: Use n = 2 and state the answer as a ratio.
Example 22. An excess of liquid mercury is added to an acidified solution of 1.0 × 10-3 M Fe3+. It is found that 5% of Fe3+ remains at equilibrium at 25°C. Calculate E°Hg22+/Hg assuming that the only reaction that occurs is 2Hg + 2Fe3+ → Hg22+ + 2Fe2+. (Given, E°Fe3+/Fe2+ = 0.77 volt). (IIT 1995)
Solution. At equilibrium: [Fe3+] = 10-3 × 5/100, [Fe2+] = 10-3 × 95/100, [Hg22+] = (10-3 × 95)/(2 × 100). At equilibrium Ecell = 0.
0 = E°cell − (0.0591/2) log ([Hg22+][Fe2+]2/[Fe3+]2), with E°cell = E°Hg/Hg22+ + E°Fe3+/Fe2+.
E°Hg/Hg22+ = −0.77 + (0.0591/2) log [(95)3 × 10-5/(25 × 2)] = −(0.77 + 0.0226) = −0.7926 volt.
Hence E°Hg22+/Hg = +0.7926 volt.
Teacher's Note: Hg22+ forms at half the moles of Fe2+; set Ecell = 0 at equilibrium.
Exam Note: Take [Hg22+] as half of [Fe2+] formed.
Example 23. Prove that for two half reactions having potentials E1 and E2 which are combined to yield a third half reaction, having a potential E3, E3 = (n1E1 + n2E2)/n3
Solution. ΔG3 = ΔG1 + ΔG2, i.e. −n3FE3 = −n1FE1 − n2FE2.
So n3E3 = n1E1 + n2E2, i.e. E3 = (n1E1 + n2E2)/n3.
Teacher's Note: Free energies add, potentials do not: ΔG = −nFE is the additive quantity.
Exam Note: Start from ΔG additivity; state n3 = n1 + n2.
Example 24. What is the standard potential of the Tl3+/Tl electrode? Tl3+ + 2e- → Tl+; E° = 1.26 volt. Tl+ + e- → Tl; E° = −0.336 volt
Solution. Tl3+ + 2e- → Tl+; nFE° = 2 × 1.26 × F = 2.52F.
Tl+ + e- → Tl; nFE° = 1 × (−0.336) × F = −0.336F.
Adding: Tl3+ + 3e- → Tl; E° = (2.52F − 0.336F)/nF = 2.184/3 = 0.728 volt.
Teacher's Note: Add ΔG (nE) values, then divide by total electrons (3).
Exam Note: Never add the E° values directly.
Example 25. Calculate the minimum mass of NaOH required to be added in RHS to consume all the H+ present in RHS of the cell of emf + 0.701 volt at 25°C before its use. Also report the emf of the cell after addition of NaOH. Cell: Zn | Zn2+ (0.1 M) || HCl (1 litre) | Pt (H2, 1 atm); E°Zn/Zn2+ = 0.760 V
Solution. The cell reaction is Zn + 2H+ → Zn2+ + H2. Nernst: Ecell = E° − (0.0591/2) log [Zn2+]/[H+]2.
0.701 = 0.760 − (0.0591/2) log [Zn2+]/[H+]2, so log [Zn2+]/[H+]2 = (0.0591 × 2)/0.0591 = 2, i.e. [Zn2+]/[H+]2 = 102.
[H+]2 = 0.1/102 = 10-3, so [H+] = 0.0316 mol L-1. Thus 0.0316 mol/litre of NaOH is required to neutralise H+ ions.
Mass of NaOH = 0.0316 × 40 = 1.264 g.
After addition of NaOH the solution becomes neutral, i.e. [H+] in cathodic solution = 10-7. Ecell = 0.760 − (0.0591/2) log (0.1/(10-7)2) = 0.3759 volt.
Teacher's Note: Find [H+] from the given emf, convert to moles of NaOH, then re-apply Nernst at pH 7.
Exam Note: Neutralised solution has [H+] = 10-7 M.
Example 26. For the galvanic cell, Ag | AgCl(s), KCl (0.2 M) || KBr (0.001 M), AgBr(s) | Ag calculate the emf generated and assign correct polarity to each electrode for the spontaneous process after taking into account the cell reaction at 25°C. Given, Ksp AgCl = 2.8 × 10-10; Ksp AgBr = 3.3 × 10-13. (IIT 1992)
Solution. Ecell = Eoxid. pot. LHS electrode + Ered. pot. RHS electrode = E°Ag/Ag+ − 0.0591 log [Ag+]LHS + E°Ag+/Ag + 0.0591 log [Ag+]RHS = 0.0591 log [Ag+]RHS/[Ag+]LHS (since E°Ag/Ag+ + E°Ag+/Ag = 0).
[Ag+]RHS = Ksp(AgBr)/[Br-] and [Ag+]LHS = Ksp(AgCl)/[Cl-].
Ecell = 0.0591 log [(3.3 × 10-13/0.001) × (0.2/(2.8 × 10-10))] = −0.0371 volt.
The cell potential is negative; therefore the cell reaction is non-spontaneous. For a spontaneous reaction emf should be positive. Therefore the correct cell reaction is Ag | AgBr; KBr || KCl | AgCl | Ag (anode on the left, cathode on the right), with emf 0.0371 volt.
Teacher's Note: Both electrodes are Ag; the difference is only [Ag+] fixed by each Ksp and the halide concentration.
Exam Note: Negative emf means reverse the cell to get the spontaneous direction.
Example 27. The following electrochemical cell has been set-up. Pt(1) | Fe3+, Fe2+ (a = 1) || Ce4+, Ce3+ (a = 1) | Pt(2); E°(Fe3+/Fe2+) = 0.77 V; E°(Ce4+/Ce3+) = 1.61 V. If an ammeter is connected between the two platinum electrodes, predict the direction of flow of current. Will the current increase or decrease with time? (IIT 2000)
Solution. Current will flow from higher reduction potential electrode to lower reduction potential electrode, i.e. from Pt(2) to Pt(1) electrode (conventional current).
E°cell = 1.61 − 0.77 = 0.84 volt.
Second part (not printed in the book, added): as the cell reaction Ce4+ + Fe2+ → Ce3+ + Fe3+ proceeds, the ratio of products to reactants rises, the emf falls towards zero, so the current decreases with time.
Teacher's Note: Higher reduction potential is the cathode; conventional current runs from cathode to anode in the external wire.
Exam Note: Emf falls as the reaction nears equilibrium; current decays.
Example 28. Copper sulphate solution (250 mL) was electrolysed using a platinum anode and a copper cathode. A constant current of 2 mA was passed for 16 minutes. It was found that after electrolysis the absorbance of the solution was reduced to 50% of its original value. Calculate the concentration of copper sulphate in the solution to begin with. (IIT 2000)
Solution. Number of faraday passed through the aqueous solution of CuSO4 = (I × t)/96500 = (2 × 10-3 × 16 × 60)/96500 = 1.99 × 10-5 (book: 1.98 × 10-5).
Thus number of equivalents of CuSO4 electrolysed from 250 mL = 1.99 × 10-5; for 1 litre = 4 × 1.99 × 10-5 = 7.96 × 10-5.
Since the absorbance falls to 50%, half of the initial copper was removed, so initial equivalents of CuSO4 per litre = 2 × 7.96 × 10-5 = 1.59 × 10-4 (book: 1.584 × 10-4).
Normality of CuSO4 solution = 1.59 × 10-4 N (i.e. about 0.8 × 10-4 M).
Teacher's Note: Absorbance is proportional to [Cu2+], so 50% drop means half the copper was deposited.
Exam Note: Convert 250 mL to 1 L (factor 4) before doubling.
Example 29. A silver electrode is immersed in saturated Ag2SO4(aq.). The potential difference between silver and the standard hydrogen electrode is found to be 0.711 V. Determine Ksp(Ag2SO4). (Given, E°Ag+/Ag = 0.799 V) (IIT 2000)
Solution. The cell may be represented as Pt(H2 1 atm) | H+ (1 M) || Ag+ (salt) | Ag(s). E°cell = E°Ag+/Ag − E°H+/H2 = 0.799 − 0 = 0.799 V. Given emf = 0.711 V.
H2 + 2Ag+ → 2Ag + 2H+; Q = [Ag]2[H+]2/([H2][Ag+]2) = 1/[Ag+]2.
0.711 = 0.799 − (0.0591/2) log (1/[Ag+]2), giving [Ag+] = 0.03243 mol L-1.
Ag2SO4 ⇌ 2Ag+ + SO42-: [SO42-] = 0.03243/2 = 0.016215 M.
Ksp = [Ag+]2[SO42-] = (0.03243)2 × (0.016215) = 1.705 × 10-5.
Teacher's Note: Silver electrode in a saturated solution: emf versus SHE gives [Ag+], then Ksp = [Ag+]2[SO42-].
Exam Note: [SO42-] is half of [Ag+] for Ag2SO4.
Example 30. Calculate the equilibrium constant for the reaction, Fe2+ + Ce4+ ⇌ Ce3+ + Fe3+. Given, E°Ce4+/Ce3+ = 1.44 V and E°Fe3+/Fe2+ = 0.68 V. (IIT July 1997)
Solution. E°cell = (0.059/1) log Kc. E°cell = E°Fe2+/Fe3+ + E°Ce4+/Ce3+ = −0.68 + 1.44 = 0.76 V.
log10 Kc = 0.76/0.059 = 12.8814, so Kc = 7.6 × 1012.
Teacher's Note: One electron exchanged (n = 1); K from log K = E°/0.059.
Exam Note: Use oxidation potential of Fe2+, which is −0.68 V.
Example 31. Find the solubility product of a saturated solution of Ag2CrO4 in water at 298 K if the emf of the cell Ag | Ag+ (satd. Ag2CrO4 soln.) || Ag+ (0.1 M) | Ag is 0.164 V at 298 K. (IIT 1998)
Solution. Ecell = (0.059/1) log [Ag+]RHS/[Ag+]LHS: 0.164 = 0.059 log (0.1/[Ag+]LHS), so [Ag+]LHS = 1.66 × 10-4 M.
[CrO42-] = 1.66 × 10-4/2.
Ksp(Ag2CrO4) = [Ag+]2[CrO42-] = (1.66 × 10-4)2 × (1.66 × 10-4/2) = 2.287 × 10-12 mol3 L-3.
Teacher's Note: Silver concentration cell: unknown [Ag+] from emf; chromate is half of it by stoichiometry.
Exam Note: Ksp of a 2:1 salt uses [Ag+] squared and half [CrO42-].
Example 32. The standard potential of the following cell is 0.23 V at 15°C and 0.21 V at 35°C. Pt H2(g) | HCl(aq.) || AgCl(s) | Ag(s) (i) Write cell reaction. (ii) Calculate ΔH° and ΔS° for the cell reaction by assuming that these quantities remain unchanged in the range 15°C to 35°C. (iii) Calculate the solubility of AgCl at 25°C. Given the standard reduction potential of the Ag+/Ag couple is 0.80 volt at 25°C. (IIT 2001)
Solution. Note: the printed statement says 0.21 V at 25°C, but the solution uses 35°C (308 K) and 15°C to 35°C, so 35°C is used here.
(i) Anode: ½H2 → H+ + e-; cathode: AgCl + e- → Ag + Cl-. Cell reaction: ½H2 + AgCl ⇌ H+ + Ag + Cl-.
(ii) ΔG° = ΔH° − TΔS° = −nFE°. At 288 K: −22195 = ΔH° − 288 ΔS°. At 308 K: −20265 = ΔH° − 308 ΔS°. On solving, ΔS° = −96.5 J K-1 and Corrected: ΔH° = −49.987 kJ (the book prints +49.987 kJ, sign lost).
(iii) E°(AgCl/Ag) at 25°C = 0.22 V (mean of 0.23 and 0.21). At equilibrium E = 0, Q = Ksp = [Ag+][Cl-]: 0 = (0.22 − 0.80) + (0.0591/1) log Ksp... using 0.059 as the book does: log Ksp = −0.58/0.059 = −9.83, Ksp = 1.47 × 10-10. (With 0.0591 the value is 1.5 × 10-10.)
Solubility S = √Ksp = √(1.47 × 10-10) = 1.21 × 10-5 M.
Teacher's Note: Two emf values at two temperatures give two ΔG equations; solve for ΔH and ΔS.
Exam Note: ΔS negative here, so ΔH must also be negative.
Example 33. Two students use same stock solution of ZnSO4 and a solution of CuSO4. The emf of one cell is 0.03 V higher than that of the other. The concentration of CuSO4 in the cell with higher emf value is 0.5 M. Find out the concentration of CuSO4 in the other cell. (2.303RT/F = 0.06) (IIT 2003)
Solution. Student I: Zn(s) | ZnSO4 (C1) || 0.5 M CuSO4 | Cu(s): E1 = E° − (0.06/2) log (C1/0.5) ...(i)
Student II: Zn(s) | ZnSO4 (C1) || CuSO4 (C2) | Cu(s): E2 = E° − (0.06/2) log (C1/C2) ...(ii)
E1 − E2 = (0.06/2)[log (C1/C2) − log (C1/0.5)] = 0.03, so 0.03 = (0.06/2) log (0.5/C2); 1 = log (0.5/C2).
C2 = 0.05 M.
Teacher's Note: Same ZnSO4 stock cancels in the difference; only the CuSO4 ratio remains.
Exam Note: Higher emf means higher CuSO4 concentration: C2 is lower.
Example 34. Find the equilibrium constant for the reaction, In2+ + Cu2+ ⇌ In3+ + Cu+ at 298 K. Given: E°Cu2+/Cu+ = 0.15 V; E°In2+/In+ = −0.40 volt; E°In3+/In+ = −0.42 volt (IIT 2004)
Solution. The given reversible reaction can be obtained as:
Cu2+ + e- → Cu+; ΔG° = −0.15F (since ΔG° = −nFE°)
In2+ + e- → In+; ΔG° = +0.40F
In+ → In3+ + 2e-; ΔG° = −0.84F
Cu2+ + In2+ ⇌ In3+ + Cu+; ΔG° = −0.59F.
−nFE° = −0.59F with n = 1, so E° = 0.59 volt.
K = antilog [nE°/0.059] = antilog [1 × 0.59/0.059] = 1010.
Teacher's Note: Add ΔG° of the three half-steps (not E°) to get the net E°, then K = 10nE°/0.059.
Exam Note: Reverse a half-reaction: sign of ΔG° flips.
Example 35. In which direction can the reaction, 2Hg(l) + 2Ag+(aq.) ⇌ 2Ag(s) + Hg22+(aq.) proceed spontaneously at the following concentrations of the ions participating in the reactions (i) and (ii)? (i) [Ag+] = 10-4 mol L-1 and [Hg22+] = 10-1 mol L-1; (ii) [Ag+] = 10-1 mol L-1 and [Hg22+] = 10-4 mol L-1. Given: E°Hg22+/Hg = 0.79 V; E°Ag+/Ag = 0.80 V (CBSE (Mains) Medical 2006)
Solution. E° = E°Ag+/Ag − E°Hg22+/Hg = 0.80 − 0.79 = 0.01 V.
(i) Q = [Hg22+]/[Ag+]2 = 10-1/(10-4)2 = 107. E = E° − (0.059/2) log Q = 0.01 − (0.059/2) log 107 = −0.1965 V. The negative value shows that the reaction will proceed from right to left, i.e. in the backward direction.
(ii) Q = 10-4/(10-1)2 = 10-2; n = 2; E° = 0.01 volt. E = 0.01 − (0.059/2) log 10-2 = 0.01 + 0.059 = 0.069 V. Since the cell potential is positive, the reaction will proceed spontaneously in the forward direction.
Teacher's Note: Compute E from the Nernst equation at the given concentrations; the sign decides direction.
Exam Note: Positive E: forward; negative E: backward.
Questions (Match the Column)
Question 1. Match the List-I with List-II and List-III: (a) Conductivity, (b) Cell constant, (c) Molar conductance, (d) Equivalent conductance; List-II symbols: (p) Λm, (q) κ, (r) Λe, (s) l/A; List-III units: (u) mho cm-1, (v) cm-1, (w) ohm-1 cm2 mol-1, (x) ohm-1 cm2 eq-1.
Solution. Answer (from key): (a) → (q), (u); (b) → (s), (v); (c) → (p), (w); (d) → (r), (x). Conductivity is κ in mho cm-1; cell constant is l/A in cm-1; molar conductance Λm in ohm-1 cm2 mol-1; equivalent conductance Λe in ohm-1 cm2 eq-1.
Teacher's Note: Match each quantity to its symbol and unit: κ, l/A, Λm per mole, Λe per equivalent.
Exam Note: Check units: cm2 per mol versus per eq.
Question 2. Match the salts in the Column-I with their use in Column-II: (a) Hg2Cl2, (b) Agar-agar, (c) 0.1 N KCl, (d) Quinhydrone; Column-II: (p) Salt bridge, (q) Calomel electrode, (r) Used in ice cream, (s) Redox electrode.
Solution. Answer (from key): (a) → (q); (b) → (p), (r); (c) → (p); (d) → (s). Hg2Cl2 forms the calomel electrode; agar-agar sets the salt bridge gel and is used in ice cream; KCl fills salt bridges; quinhydrone is a redox electrode.
Teacher's Note: Calomel = Hg2Cl2; agar gels the salt bridge; quinhydrone electrode responds to H+.
Exam Note: Agar-agar has two uses: salt bridge and ice cream.
Question 3. Match the Column-I with Column-II: (a) α (Degree of ionisation), (b) t+ (Transport number), (c) Fraction of the mole undergoing ionisation, (d) NaCl; Column-II (Relation): (p) λ+/Λ, (q) Λmc/Λm0, (r) U+/(U+ + U-), (s) Λec/Λe0, (t) Λm = Λe.
Solution. Answer (from key): (a) → (q), (s); (b) → (p), (r); (c) → (q), (s); (d) → (t). α = Λc/Λ0 (molar or equivalent form); t+ = λ+/Λ = U+/(U+ + U-); for a 1:1 salt like NaCl, Λm = Λe.
Teacher's Note: α and fraction ionised are the same ratio; transport number equals ion's share of total conductance.
Exam Note: 1:1 electrolyte: molar and equivalent conductance coincide.
Question 4. Match the physical quantities in the List-I with their units in List-II: (a) Resistance, (b) Resistivity, (c) Conductivity, (d) Specific conductance; List-II: (p) ohm, (q) volt amp-1, (r) ohm m, (s) ohm-1 m-1.
Solution. Answer (from key): (a) → (p), (q); (b) → (r); (c) → (s); (d) → (s). Resistance is in ohm = volt per ampere; resistivity in ohm m; conductivity (specific conductance) in ohm-1 m-1.
Teacher's Note: R = V/I gives ohm = volt amp-1; conductivity is the reciprocal of resistivity.
Exam Note: Conductivity and specific conductance are the same quantity.
Question 5. Match the Column-I with Column-II: (a) Specific conductance, κ; (b) Molar conductance, Λm; (c) Resistance of electrolyte solution R; (d) Degree of ionization of weak electrolyte, α; Column-II: (p) Λmc/Λmo, (q) Decreases with dilution, (r) Increases with dilution, (s) Increases with increase in the distance between parallel plates.
Solution. Answer (from key): (a) → (q); (b) → (r); (c) → (r), (s); (d) → (p), (r). Corrected: the printed key gives (c → q, s); but on dilution the resistance of a solution increases (fewer ions per unit volume), so (c) is (r), (s). κ falls on dilution; Λm and α rise on dilution.
Teacher's Note: Dilution lowers κ (fewer ions), raises Λm and α; R rises as κ falls and with plate separation.
Exam Note: R increases with dilution, not decreases.
Question 6. Match Column-I (combination of half-cell reactions) with Column-II (potential of overall process): (a) 6OH- + Br- ⇌ BrO3- + 3H2O + 6e-, E° = −0.61 V; 2OH- + Br- ⇌ BrO- + H2O + 2e-, E° = −0.76 V; 4OH- + BrO- ⇌ BrO3- + 2H2O + 4e-, E° = ? (b) H2SO3 + 4H+ + 4e- ⇌ S + 3H2O, E° = 0.45 V; SO42- + 4H+ + 2e- ⇌ H2SO3 + H2O, E° = 0.17 V; SO42- + 8H+ + 6e- ⇌ S + 4H2O, E° = ? (c) ClO3- + 6H+ + 6e- ⇌ Cl- + 3H2O, E° = +1.45 V; Cl2 + 2e- ⇌ 2Cl-, E° = +1.36 V; ClO3- + 6H+ + 5e- ⇌ ½Cl2 + 3H2O, E° = ? (d) Zn2+(aq) + 2e- → Zn(s), E° = −0.76 V; Ag+ + e- → Ag(s), E° = +0.80 V; Zn(s) + 2Ag+ ⇌ Zn2+(aq) + 2Ag(s), E° = ? Column-II: (p) E° = 0.56 V, (q) E° = −0.535 V, (r) E° = +0.36 V, (s) E° = +1.47 V.
Solution. Answer (from key): (a) → (q); (b) → (r); (c) → (s); (d) → (p). Working: (a) E° = [6(−0.61) − 2(−0.76)]/4 = −0.535 V. (b) E° = [4(0.45) + 2(0.17)]/6 = +0.357 ≈ +0.36 V. (c) E° = [6(1.45) − 1(1.36)]/5 = +1.468 ≈ +1.47 V. (d) E° = 0.80 − (−0.76) = 1.56 V. Corrected note: option (p) is printed as 0.56 V, which is a misprint for 1.56 V; the key still pairs (d) with (p).
Teacher's Note: Combine half-reactions by adding nE° (free energies), then divide by electrons of the target reaction.
Exam Note: Weighted average of nE°, not simple sum of E°.
Question 7. Match the Column-I with Column-II: (a) Concentration cell, (b) Edison cell, (c) Mercury cell, (d) Dry cell; Column-II: (p) Fe is oxidised by Ni2O3, (q) Zinc anode, (r) HgO cathode, (s) E° = 0.
Solution. Answer (from key): (a) → (s); (b) → (p); (c) → (q), (r); (d) → (q). Concentration cell has identical electrodes so E° = 0; Edison cell: Fe + Ni2O3 → FeO + 2NiO; mercury cell: Zn anode and HgO cathode; dry cell: zinc anode.
Teacher's Note: Recall each cell's electrodes: Edison Fe/Ni2O3, mercury Zn/HgO, dry Zn/MnO2.
Exam Note: Same electrodes on both sides give E° = 0.
Question 8. Match the Column-I with Column-II: (a) Calomel, (b) Glass, (c) Hydrogen, (d) Quinhydrone (electrode); Column-II (type): (p) Reference, (q) Redox, (r) Membrane, (s) Gas.
Solution. Answer (from key): (a) → (p); (b) → (r); (c) → (s); (d) → (q). Calomel is a secondary reference electrode; glass electrode has a membrane; hydrogen is a gas electrode; quinhydrone is a redox electrode.
Teacher's Note: Classify electrodes by construction: reference, membrane, gas, redox.
Exam Note: Glass electrode is a membrane electrode.
Question 9. Match the Column-I with Column-II: (a) Kohlrausch law, (b) Λm, (c) κ (kappa), (d) α; Column-II: (p) Λm/Λm∞, (q) (1/R) × (l/A), (r) ΛmoCa3(PO4)2 = 3λoCa2+ + 2λoPO43-, (s) κ × 1000/M.
Solution. Answer (from key): (a) → (r); (b) → (s); (c) → (q); (d) → (p). Kohlrausch law gives Λo as the sum of ionic contributions; Λm = 1000κ/M; κ = (1/R)(l/A); α = Λm/Λm∞.
Teacher's Note: Kohlrausch law is additivity of limiting ionic conductances; coefficients are the ion counts in the formula.
Exam Note: Coefficients 3 and 2 come from Ca3(PO4)2.
Question 10. Match the Column-I with Column-II: (a) E° = 0, (b) E = 0, (c) ΔG = 0, (d) 1 Faraday; Column-II: (p) Cell is discharged, (q) Q = K, (r) 96500 coulomb, (s) 1 mol electrons, (t) Concentration cell.
Solution. Answer (from key): (a) → (t); (b) → (p), (q); (c) → (p), (q); (d) → (r), (s). E° = 0 for a concentration cell; E = 0 and ΔG = 0 mean equilibrium (cell discharged, Q = K); 1 faraday = 96500 C = charge of 1 mol electrons.
Teacher's Note: E = 0 or ΔG = 0 means equilibrium: Q = K and the cell is dead.
Exam Note: Equilibrium conditions: E = 0, ΔG = 0, Q = K.
Practice Problems
Practice Problem 1. How many coulombs are required for the following reductions? (i) 1 mole of Ag+ ions to Ag (ii) 1 mole of Cu2+ ions to Cu (iii) 1 mole of MnO4- ions to MnO42-
Solution. Charge = (moles of electrons per mole of ion) × 96500 C.
(i) Ag+ + e- → Ag: 1 F = 96500 C. (ii) Cu2+ + 2e- → Cu: 2 F = 193000 C. (iii) MnO4- + e- → MnO42-: 1 F = 96500 C.
Answer: (i) 96500 coulomb (ii) 193000 coulomb (iii) 96500 coulomb.
Teacher's Note: Count electrons in each half-reaction; charge is n × 96500 C per mole.
Exam Note: Write the half-reaction first, then multiply n by F.
Practice Problem 2. How many faradays are needed to reduce 2 gram-mole of Cu2+ to Cu metal?
Solution. Cu2+ + 2e- → Cu: 1 mol needs 2 F, so 2 mol need 4 F.
Answer: 4 faraday.
Teacher's Note: Each Cu2+ takes two electrons, so faradays = 2 × moles.
Exam Note: Multiply moles by electrons per ion.
Practice Problem 3. How many faradays are released when 12.7 g of copper metal is changed into copper ions?
Solution. Cu → Cu2+ + 2e-: 1 mole (63.5 g) releases 2 F. 12.7 g = 12.7/63.5 = 0.2 mol, so faradays = 0.2 × 2 = 0.4.
Answer: 0.4 faraday.
Teacher's Note: Convert grams to moles, then multiply by 2 electrons per Cu atom.
Exam Note: Show mole conversion before faradays.
Practice Problem 4. Calculate the number of coulombs required to deposit 40.5 g Al when the electrode reaction is: Al3+ + 3e- → Al
Solution. 40.5 g Al = 40.5/27 = 1.5 mol. Charge = 1.5 × 3 × 96500 = 4.34 × 105 C.
Answer: 4.34 × 105 coulomb.
Teacher's Note: Three electrons per Al atom, so 1.5 mol needs 4.5 F.
Exam Note: Use n = 3 and M(Al) = 27.
Practice Problem 5. Calculate the number of coulombs required to deposit 50 g of silver at cathode from silver nitrate solution. (Atomic mass of silver = 108)
Solution. Ag+ + e- → Ag: 108 g needs 96500 C. Charge = (50/108) × 96500 = 44675.9 C.
Answer: 44675.9 coulomb.
Teacher's Note: One electron per Ag, so charge = (mass/108) × 96500.
Exam Note: Equivalent mass of Ag equals atomic mass.
Practice Problem 6. How much electric charge is required to produce 20.0 g of calcium from molten CaCl2?
Solution. Ca2+ + 2e- → Ca. 20.0 g = 20/40 = 0.5 mol, so charge = 0.5 × 2 × 96500 = 96500 C.
Answer: 96500 coulomb.
Teacher's Note: Calcium takes two electrons per atom; 0.5 mol equals exactly one faraday.
Exam Note: Equivalent mass of Ca is 20.
Practice Problem 7. If 3 faradays of electricity are passed through an iron (II) bromide solution, how many grams of iron metal will be deposited? (At. mass of iron = 56)
Solution. Fe2+ + 2e- → Fe: 2 F deposit 56 g, so 3 F deposit (56/2) × 3 = 84 g.
Answer: 84 g.
Teacher's Note: Iron(II) needs two electrons per atom; equivalent mass is 28.
Exam Note: Use equivalent mass 28 for Fe2+.
Practice Problem 8. A certain quantity of electricity deposits 0.54 g of Ag from silver nitrate solution. What volume of hydrogen will be liberated by the same quantity of electricity at 27°C and 750 mm of Hg pressure? [Hint: Mass of H2/Mass of Ag = Eq. mass of H2/Eq. mass of Ag]
Solution. Mass of H2 = (1 × 0.54)/108 = 0.005 g = 0.0025 mol. V = nRT/P = (0.0025 × 0.0821 × 300)/(750/760) = 0.0624 L.
Answer: 0.0623 litre (book: 0.06234 L).
Teacher's Note: Same charge liberates equal equivalents (Faraday's second law); then apply ideal gas law at given T and P.
Exam Note: Convert 750 mm Hg to atm (÷760).
Practice Problem 9. In the electrolysis of an aqueous cupric bromide solution, how many grams of bromine are formed on passing a current of 1 ampere for 16 minutes and 5 seconds? Write the anode and the cathode half reactions.
Solution. Time = 16 × 60 + 5 = 965 s; Q = 1 × 965 = 965 C = 0.01 F. Anode: 2Br- → Br2 + 2e-; cathode: Cu2+ + 2e- → Cu.
Br2 formed = (0.01/2) × 160 = 0.80 g.
Answer: 0.80 g; cathode reaction Cu2+ + 2e- → Cu; anode reaction 2Br- → Br2 + 2e-.
Teacher's Note: The chosen time makes Q exactly 965 C = 0.01 F; bromine eq. mass is 80.
Exam Note: Convert minutes plus seconds to seconds first.
Practice Problem 10. A current of 1.5 amperes is passed through a solution of a salt of a bivalent metal for 30 minutes. Increase in mass of cathode is 0.8898 g. Find the atomic mass of the metal.
Solution. Q = 1.5 × 1800 = 2700 C = 0.02798 F. Equivalent mass = 0.8898/0.02798 = 31.80. Atomic mass = 31.80 × 2 = 63.6.
Answer: 63.6.
Teacher's Note: Equivalent mass = mass deposited per faraday; multiply by valency 2 for atomic mass.
Exam Note: Atomic mass = equivalent mass × valency.
Practice Problem 11. A lead storage battery is discharged in which the following electrode reaction takes place: Pb(s) + PbO2(s) + 2H2SO4(l) → 2PbSO4 + 2H2O. The original volume in electrolyte is 1 litre. During discharge the concentration of H2SO4 changes from 34.6% by weight (density 1.261 g/mL) to 27% by weight. How many faradays have left the anodic half-cell? Water produced during electrolysis is used up.
Solution. Initial solution = 1261 g, H2SO4 = 0.346 × 1261 = 436.3 g. Let x mol H2SO4 be consumed; PbSO4 precipitates and x mol H2O is formed, so solution mass = 1261 − 98x + 18x = 1261 − 80x.
(436.3 − 98x)/(1261 − 80x) = 0.27 ⇒ 95.83 = 76.4x ⇒ x = 1.254 mol. The reaction passes 2 F per 2 mol H2SO4, so 1 F per mol: faradays = 1.254.
Answer: 1.254 faraday.
Teacher's Note: Acid consumed changes both the acid mass and total solution mass (water added); solve the 27% condition.
Exam Note: Each mole of H2SO4 used passes one faraday.
Practice Problem 12. The chemical reaction given below: Cl2(g) + SO2(g) + 2H2O(l) → 2Cl-(aq.) + 3H+(aq.) + HSO4-(aq.) proceeds readily in aqueous acid solution. (i) Give the half-cell reactions. (ii) If a fully charged cell initially held 1 mole of Cl2, for how many days could it sustain a current of 0.05 ampere, assuming the cell becomes non-operative when 90% of initial Cl2 has been used up?
Solution. (i) Cathode (reduction): Cl2 + 2e- → 2Cl-. Anode (oxidation): SO2 + 2H2O → HSO4- + 3H+ + 2e-.
(ii) Cl2 used = 0.9 mol, needing 0.9 × 2 = 1.8 F = 1.8 × 96500 = 173700 C. t = 173700/0.05 = 3.474 × 106 s = 40.2 days.
Answer: 40.2 days.
Teacher's Note: Balance each half-reaction for charge; Cl2 takes two electrons, so 0.9 mol gives 1.8 F.
Exam Note: Divide seconds by 86400 to get days.
Practice Problem 13. A current of 80 microampere is passed through a solution of AgNO3 for 32 minutes using platinum electrodes. A uniform single atom thick layer is deposited covering 86% of the cathode surface. If total surface area of cathode is 601.7 cm2, calculate the area covered by one Ag atom.
Solution. Q = 80 × 10-6 × 32 × 60 = 0.1536 C. Moles of Ag = 0.1536/96500 = 1.592 × 10-6; atoms = 1.592 × 10-6 × 6.022 × 1023 = 9.59 × 1017.
Area covered = 0.86 × 601.7 = 517.5 cm2. Area per atom = 517.5/(9.59 × 1017) = 5.4 × 10-16 cm2.
Answer: 5.4 × 10-16 cm2.
Teacher's Note: Charge gives moles then atoms; covered area divided by atoms gives area per atom.
Exam Note: Use 86% of total area, not the total.
Practice Problem 14. Anthracene can be electrolytically oxidised to anthraquinone: C14H10 + 3[O] → C14H8O2 + H2 (anthracene to anthraquinone, structures: three fused benzene rings; anthraquinone has two C=O groups at the middle ring). What mass of anthraquinone can be produced by the passage of 1 ampere current for an hour at 100% efficiency?
Solution. Anthracene (C14H10) → anthraquinone (C14H8O2) involves 6 electrons per molecule. Q = 1 × 3600 = 3600 C = 0.03731 F. Moles = 0.03731/6 = 6.218 × 10-3. Mass = 6.218 × 10-3 × 208 = 1.2932 g.
Answer: 1.2932 g. (Figure not redrawn: structures described in words.)
Teacher's Note: Count 6 electrons from the oxidation state change on the middle ring (CH2-like to two C=O).
Exam Note: Anthraquinone molar mass is 208 g/mol.
Practice Problem 15. Dal lake has water 8.2 × 1012 litre approximately. A power reactor produces electricity at the rate of 1.5 × 106 coulomb per second at an appropriate voltage. How much time would it take to electrolyse the lake?
Solution. Mass of water = 8.2 × 1012 × 1000 g; moles = 8.2 × 1015/18 = 4.56 × 1014. Electrolysis 2H2O → 2H2 + O2 needs 2 F per mol H2O: charge = 4.56 × 1014 × 2 × 96500 = 8.8 × 1019 C.
t = 8.8 × 1019/(1.5 × 106) = 5.9 × 1013 s ≈ 1.9 × 106 years.
Answer: 1.9 million year.
Teacher's Note: Each water molecule needs two electrons; the big charge divided by the rate gives time.
Exam Note: Convert seconds to years (3.15 × 107 s/yr).
Practice Problem 16. How many grams of H2 and O2 are produced during the electrolysis of water by a 1.30 ampere current for 5 hours? What volumes of dry gases are produced at NTP?
Solution. Q = 1.30 × 5 × 3600 = 23400 C = 0.2425 F. H2 = 0.2425 × 1 = 0.242 g; O2 = 0.2425 × 8 = 1.94 g. Volumes: H2 = 0.2425/2 mol × 22.4 = 2.72 L; O2 = 0.2425/4 mol × 22.4 = 1.36 L.
Answer: 0.242 g H2; 1.94 g O2; 2.72 litre H2; 1.36 litre O2.
Teacher's Note: Same faradays liberate 1 g H2 or 8 g O2 per F; volume ratio H2:O2 is 2:1.
Exam Note: Gas volume ratio 2:1 is a quick check.
Practice Problem 17. How many coulombs of electricity would be required to reduce the iron in 36.0 g of potassium hexacyano ferrate(III), K3Fe(CN)6, to metallic iron? [Hint: Iron in the complex is Fe3+. K3Fe(CN)6 + 3e- → 3K+ + 6CN- + Fe (1 mole, 3 × 96500 C)]
Solution. Molar mass of K3Fe(CN)6 = 329.3 g/mol. Moles = 36.0/329.3 = 0.1093. Charge = 0.1093 × 3 × 96500 = 3.17 × 104 C.
Answer: 3.17 × 104 coulomb.
Teacher's Note: Fe is +3 in the complex, so each formula unit takes three electrons.
Exam Note: Compute molar mass carefully: 3K + Fe + 6CN.
Practice Problem 18. What current strength in ampere will be required to liberate 5 g of iodine from potassium iodide solution in 30 minutes?
Solution. 2I- → I2 + 2e-. Moles of I2 = 5/253.8 = 0.0197; charge = 0.0197 × 2 × 96500 = 3799 C. I = 3799/1800 = 2.11 A.
Answer: 2.11 ampere.
Teacher's Note: Two electrons per I2 molecule; I = Q/t with t in seconds.
Exam Note: Equivalent mass of iodine is 127.
Practice Problem 19. The mass of copper deposited from a solution of copper sulphate by a uniform current of 0.25 ampere flowing for one hour is 0.295 g. Find the equivalent mass of copper. (1 faraday = 96500 coulomb)
Solution. Q = 0.25 × 3600 = 900 C. Equivalent mass = (mass × 96500)/Q = (0.295 × 96500)/900 = 31.6.
Answer (printed): 31.75. Corrected: the data given yield 31.6 (the printed 31.75 is the accepted value 63.5/2, not what 0.295 g gives).
Teacher's Note: Equivalent mass = mass deposited × 96500/charge; measured data give 31.6 against theoretical 31.75.
Exam Note: Use E = (w × 96500)/(I × t).
Practice Problem 20. The solution of a salt of a metal of atomic mass 112 was electrolysed for 15 minutes with a current of 1.5 ampere. The mass of the metal deposited was 0.788 g. Find out the valency of the metal.
Solution. Q = 1.5 × 900 = 1350 C = 0.01399 F. Equivalent mass = 0.788/0.01399 = 56.3. Valency = atomic mass/equivalent mass = 112/56.3 = 1.99 ≈ 2.
Answer: 2.
Teacher's Note: Valency = atomic mass divided by equivalent mass found from the deposition data.
Exam Note: Round valency to the nearest integer.
Practice Problem 21. If a monovalent metal ion carries 1.6 × 10-19 coulomb of electricity, what is the amount of electricity carried by one gram molecular mass of the metal ions?
Solution. Charge per mole = NA × charge of one ion = 6.022 × 1023 × 1.6 × 10-19 = 9.63 × 104 C.
Answer: 9.6336 × 104 coulomb.
Teacher's Note: One mole of monovalent ions carries NAe, which is nearly one faraday.
Exam Note: State result as approximately 96500 C.
Practice Problem 22. Calculate approximately how much current is necessary to produce oxygen gas at the rate of 1 mL per second? [Hint: 1 g-equivalent of oxygen or 22400/4 mL is liberated by 96500 coulomb.]
Solution. 22400/4 = 5600 mL O2 at NTP per 96500 C. For 1 mL per second: I = 96500/5600 = 17.23 A.
Answer: 17.23 ampere.
Teacher's Note: One equivalent of O2 occupies 5.6 L at NTP, and charge per second is current.
Exam Note: Charge per mL = 96500/5600 C.
Practice Problem 23. 0.5 faraday of electricity was required to deposit all the copper in 500 mL of a copper sulphate solution. What is the normality of the copper sulphate solution?
Solution. 0.5 F deposits 0.5 equivalent of Cu present in 0.5 L. Normality = equivalents/volume = 0.5/0.5 = 1 N.
Answer: Normality = 1 N.
Teacher's Note: Equivalents deposited equal faradays used; normality = equivalents per litre.
Exam Note: Convert 500 mL to 0.5 L.
Practice Problem 24. Copper is deposited at an electrode according to the reaction Cu2+ + 2e- → Cu. When a current of 1.34 ampere was passed through a solution of copper sulphate for 10 hours, 15.885 g of copper was deposited. (i) How many coulombs of electricity were passed through the solution? (ii) How many moles of copper were deposited? (iii) How many coulombs are required for the deposition of 1 mole of copper? (iv) If the charge on an electron is 1.6 × 10-19 coulomb, calculate the value of Avogadro's number.
Solution. (i) Q = I t = 1.34 × 10 × 3600 = 48240 C. (ii) Moles = 15.885/63.5 = 0.25. (iii) 1 mole needs 2 × 96500 C. (iv) NA = (charge for 1 mol of electrons)/(charge of one electron) = 96500/(1.6 × 10-19) = 6.03 × 1023.
Answer: (i) 48240 C (printed as 482.40 coulomb; Corrected: I t = 1.34 × 36000 = 48240 C, and 0.25 mol × 193000 = 48250 C confirms) (ii) 0.25 mol (iii) 2 × 96500 coulomb (iv) 6.03 × 1023.
Teacher's Note: Charge from I t; check against moles × 2F; NA = F/e.
Exam Note: Hours to seconds: ×3600; copper takes 2 F per mole.
Practice Problem 25. Calculate the mass and volume at NTP of hydrogen and chlorine that will be formed by passing 10,000 coulomb of charge through an aqueous solution of potassium chloride. The cell reaction is: 2KCl + 2HOH → 2KOH + Cl2 + H2
Solution. Faradays = 10000/96500 = 0.1036 F. H2: 0.1036 g (eq. mass 1) = 0.0518 mol, volume = 0.0518 × 22.4 = 1.16 L. Cl2: 0.1036 × 35.5 = 3.68 g = 0.0518 mol, volume 1.16 L.
Answer: 0.1036 g H2; 3.678 g Cl2; Cl2 volume 1.1603 litre. Corrected: the H2 volume is printed as 1.063 litre, but equal moles of H2 and Cl2 form, so H2 volume is also 1.1603 litre.
Teacher's Note: H2 and Cl2 form in equal moles, so equal volumes at NTP.
Exam Note: Equal moles of H2 and Cl2 means equal volumes.
Practice Problem 26. Three electrolytic cells A, B and C containing electrolytes zinc sulphate, silver nitrate and copper sulphate respectively, were connected in series. A steady current of 1.50 ampere was passed through them until 1.45 g of silver was deposited at the cathode of cell B. How long did the current flow? What masses of copper and zinc were deposited? (At. mass: Cu = 63.5, Zn = 65.4, Ag = 107.8)
Solution. Moles of Ag = 1.45/107.8 = 0.01345 = 0.01345 F. Q = 0.01345 × 96500 = 1298 C; t = 1298/1.5 = 865 s. Same charge in series: Cu = 0.01345 × 63.5/2 = 0.427 g; Zn = 0.01345 × 65.4/2 = 0.44 g.
Answer: 865 second; 0.427 g Cu; 0.44 g Zn.
Teacher's Note: Series cells carry the same charge; each metal deposits in proportion to equivalent mass.
Exam Note: Same faradays through all cells in series.
Practice Problem 27. An electric current passing for 6 minutes through a dilute H2SO4 solution gave 40 mL of the electrolytic gas (H2 + O2) measured at NTP. What was the average value of current? [Hint: 96500 coulomb give 11.2 litre of H2 and 5.6 litre of O2, i.e. 16.8 litre of electrolytic gas at NTP.]
Solution. Charge for 40 mL of mixed gas = 96500 × 0.040/16.8 = 229.8 C. Time = 360 s. I = 229.8/360 = 0.638 A.
Answer: 0.638 ampere.
Teacher's Note: One faraday releases 16.8 L of mixed gas, so charge scales with gas volume.
Exam Note: Convert mL to litre before using 16.8 L per F.
Practice Problem 28. The same quantity of electricity that liberated 2.158 g silver was passed through a solution of a gold salt and 1.314 g of gold was deposited. The equivalent mass of silver is 107.9. Calculate the equivalent mass of gold. What is the oxidation state of gold in this gold salt? (At. mass of gold = 197)
Solution. Equivalents of Ag = 2.158/107.9 = 0.0200. Same equivalents of gold, so equivalent mass of gold = 1.314/0.0200 = 65.7. Oxidation state = 197/65.7 = 3.
Answer: Eq. mass = 65.7; oxidation state = 3.
Teacher's Note: Same charge deposits equal equivalents; valency = atomic mass/equivalent mass.
Exam Note: Equivalents (not moles) are equal for same charge.
Practice Problem 29. Calculate the volume of Cl2 at NTP produced during electrolysis of MgCl2 which produces 6.50 g Mg. (At. mass of Mg = 24.3)
Solution. Moles Mg = 6.50/24.3 = 0.2675. Mg2+ + 2e- → Mg and 2Cl- → Cl2 + 2e-, so moles of Cl2 = 0.2675; volume = 0.2675 × 22.4 = 5.99 L.
Answer: 5.99 litre.
Teacher's Note: Same electrons on both electrodes; one Cl2 per Mg.
Exam Note: Mole ratio Mg : Cl2 = 1 : 1.
Practice Problem 30. How long does it take to deposit 100 g of Al from an electrolytic cell containing Al2O3 using a current of 125 ampere?
Solution. Moles of Al = 100/27 = 3.704; charge = 3.704 × 3 × 96500 = 1.072 × 106 C. t = 1.072 × 106/125 = 8577.8 s.
Answer: 8577.8 second.
Teacher's Note: Aluminium takes three electrons per atom; time = charge/current.
Exam Note: Use n = 3 and M = 27.
Practice Problem 31. Ten gram of a fairly concentrated solution of CuSO4 is electrolysed using 1.01 faraday of electricity. Calculate the mass of the resulting solution.
Solution. The printed answer corresponds to 0.01 F (same data as Example 3), not 1.01 F: Cu deposited = 0.01 × 31.75 = 0.3175 g; O2 evolved = 0.01 × 8 = 0.08 g. Loss = 0.3975 g. Mass = 10 − 0.3975 = 9.6025 g.
Answer: 9.6025 g. (Corrected: charge taken as 0.01 F; 1.01 F would need about 32 g of copper, more than the 10 g sample.)
Teacher's Note: Solution loses deposited Cu and evolved O2; subtract both from 10 g.
Exam Note: Subtract both metal and oxygen lost.
Practice Problem 32. The density of copper is 8.94 g mL-1. Find the number of coulombs needed to plate an area 10 × 10 cm2 to a thickness of 10-2 cm using CuSO4 solution as electrolyte. (At. mass of Cu = 63.6)
Solution. Volume = 10 × 10 × 10-2 = 1 cm3; mass = 8.94 g; moles = 8.94/63.6 = 0.1406. Charge = 0.1406 × 2 × 96500 = 27129 C.
Answer: 27129.2 coulomb.
Teacher's Note: Plated volume = area × thickness, then density gives mass and Faraday gives charge.
Exam Note: Two electrons per Cu; keep units in cm.
Practice Problem 33. What mass of Ag (At. mass 108) could be plated on a spoon from electrolysis of AgNO3 solution by one ampere current for 10 minutes? (Dhanbad 1990)
Solution. Q = 1 × 600 = 600 C. Mass = (600 × 108)/96500 = 0.6715 g.
Answer: 0.6715 g.
Teacher's Note: Equivalent mass of Ag is 108 (one electron); mass = Q E/96500.
Exam Note: Convert 10 minutes to 600 s.
Practice Problem 34. If a current of 0.3 ampere is drawn from a Daniell cell for 1 hour, what would be the change in mass of electrodes? (At. mass Cu = 63.5 and Zn = 65.37)
Solution. Q = 0.3 × 3600 = 1080 C = 0.01119 F. Cu deposited = 0.01119 × 63.5/2 = 0.355 g; Zn dissolved = 0.01119 × 65.37/2 = 0.366 g.
Answer: 0.356 g Cu deposited, 0.366 g of Zn dissolves.
Teacher's Note: Daniell cell: Zn oxidises (loses mass) and Cu deposits (gains) with equal charge.
Exam Note: Mass gain at cathode, loss at anode, same charge.
Practice Problem 35. An element A (At. mass 112) and an element B (At. mass 27) form chlorides. Solutions of these chlorides are electrolysed separately and it is found that when the same quantity of electricity is passed, 5.6 g of A was deposited while in the other cell only 0.9 g of B was deposited. What is the valency of A if the valency of B is 3? (Dhanbad 1991)
Solution. Equivalent mass of B = 27/3 = 9; equivalents of B = 0.9/9 = 0.1. Equivalents of A = 0.1 = 5.6/EA, so EA = 56. Valency of A = 112/56 = 2.
Answer: 2.
Teacher's Note: Same charge gives equal equivalents; find EA then valency = atomic mass/EA.
Exam Note: Equal equivalents, not equal moles.
Practice Problem 36. How many coulombs must be applied to a cell for the electrolytic production of 245 g of NaClO4 from NaClO3? The anode efficiency for the desired reaction is 60%.
Solution. ClO3- + H2O → ClO4- + 2H+ + 2e-. Moles NaClO4 = 245/122.5 = 2; charge needed = 2 × 2 × 96500 = 3.86 × 105 C. At 60% efficiency: 3.86 × 105/0.6 = 6.43 × 105 C.
Answer: 6.43 × 105 coulomb.
Teacher's Note: Chlorine goes +5 to +7, so two electrons per ion; divide by efficiency for the actual charge.
Exam Note: Divide by 0.60 for efficiency.
Practice Problem 37. Calculate the mass of Hg2Cl2 which can be prepared by the reduction of mercury(II) ions in the presence of chloride ions by the passage of 5.0 ampere current for 3.0 hours. [Hint: 2Hg2+ + 2Cl- + 2e- → Hg2Cl2 (2 F, 1 mole)]
Solution. Q = 5.0 × 3 × 3600 = 54000 C = 0.5596 F. 2 F give 1 mol Hg2Cl2, so moles = 0.2798. Mass = 0.2798 × 473 = 132.3 g (taking Hg = 201).
Answer: 132.34 g.
Teacher's Note: Each Hg2Cl2 needs two electrons (Hg2+ to Hg22+), so 2 F per mole.
Exam Note: Mole ratio: 2 F per mole of Hg2Cl2.
Practice Problem 38. How long will it take for a uniform current of 6.0 ampere to deposit 78.0 g gold from a solution of AuCl4-? What mass of chlorine gas will be formed simultaneously at the anode in the electrolytic cell? [Hint: AuCl4- + 3e- → Au + 4Cl- (cathode, 3 F per mole); 2Cl- → Cl2 + 2e- (anode, 2 F per mole)]
Solution. Moles Au = 78.0/197 = 0.396; charge = 0.396 × 3 × 96500 = 1.146 × 105 C; t = 1.146 × 105/6.0 = 19104 s. Cl2: 1.188 F / 2 = 0.594 mol × 71 = 42.17 g.
Answer: 19104 second; chlorine liberated = 42.17 g.
Teacher's Note: Au(III) takes 3 electrons; the same charge frees Cl2 at 2 F per mole.
Exam Note: Same charge flows at both electrodes.
Practice Problem 39. How long will it take 5 ampere of current to deposit 2 g of copper from a solution of copper sulphate? (Given, CE of copper = 32, F = 96500 coulomb) (Ranchi 1996)
Solution. W = (E I t)/96500: 2 = (32 × 5 × t)/96500, so t = 1206 s = 20.1 minute.
Answer: 20.1 minute.
Teacher's Note: Faraday's first law with chemical equivalent 32: t = 96500 W/(E I).
Exam Note: Convert seconds to minutes in the answer.
Practice Problem 40. The amount of lactic acid, HC3H5O3, produced in a sample of muscle tissue was analysed by reaction with hydroxide ion. The hydroxide ion was produced in the sample mixture by electrolysis. The cathode reaction was 2H2O(l) + 2e- → H2(g) + 2OH-(aq.). Hydroxide ion reacts with lactic acid as soon as it is produced. The end point of the reaction is detected using an acid-base indicator. It required 115 seconds for a current of 15.6 mA to reach end point. How many grams of lactic acid (a monoprotic acid) were present in the sample?
Solution. Faradays used = (I t)/96500 = (15.6 × 10-3 × 115)/96500 = 1.86 × 10-5. Moles of lactic acid = moles of OH- = 1.86 × 10-5. Mass = 1.86 × 10-5 × 90 = 1.674 × 10-3 g.
Answer: 1.674 × 10-3 g.
Teacher's Note: Coulometric titration: charge gives moles of OH-, which equal moles of monoprotic acid.
Exam Note: 1 mol e- gives 1 mol OH-.
Practice Problem 41. In what direction can the reaction: 2NaCl + Fe2(SO4)3 ⇌ 2FeSO4 + Cl2 + Na2SO4 proceed spontaneously? (Given: E°Fe3+/Fe2+ = 0.77 V; E°Cl-/Cl2 = 1.36 V) (BCECE 2005)
Solution. E°cell for the forward reaction = E°(reduction of Fe3+) − E°(Cl2/Cl-) = 0.77 − 1.36 = −0.59 V, which is negative. So the forward reaction is not spontaneous; Cl2 oxidises Fe2+ instead.
Answer (printed): Forward. Corrected: Backward (right to left), since E°cell = −0.59 V for the forward direction.
Teacher's Note: Compare reduction potentials: stronger oxidant Cl2 (1.36 V) oxidises Fe2+, so the reaction reverses.
Exam Note: Negative E°cell means reverse is spontaneous.
Practice Problem 42. How many faradays of electricity will be required to completely electrolyse one mole of molten Al2O3 to produce Al metal and O2 gas? [JEE (West Bengal) 2005]
Solution. Al2O3 contains 2 Al3+: 2Al3+ + 6e- → 2Al, and 3O2- → 3/2 O2 + 6e-. So 6 F are needed.
Answer (printed): 3 F. Corrected: 6 F (two Al3+ ions per formula unit, three electrons each).
Teacher's Note: Count total charge on cations in the formula: 2 × (+3) = 6, so 6 F per mole.
Exam Note: Multiply ion charge by number of ions in formula.
Practice Problem 43. The resistance of 0.01 N solution at 25°C is 200 ohm. Cell constant of the conductivity cell is unity. Calculate the equivalent conductance of the solution.
Solution. κ = cell constant/R = 1/200 = 0.005 ohm-1 cm-1. Λe = κ × 1000/N = 0.005 × 1000/0.01 = 500 ohm-1 cm2 eq-1.
Answer: 500 ohm-1 cm2 eq-1.
Teacher's Note: κ = (1/R) times the cell constant, then Λe = 1000κ/N.
Exam Note: Use normality N = 0.01 in the 1000/N factor.
Practice Problem 44. A conductivity cell was filled with 0.01 M solution of KCl which was known to have a specific conductivity of 0.1413 ohm-1 m-1 at 298 K. Its measured resistance at 298 K was 94.3 ohm. When the cell was filled with 0.02 M AgNO3 solution, its resistance was 50.3 ohm. Calculate (i) cell constant and (ii) the specific conductance of AgNO3 solution.
Solution. (i) Cell constant = κR = 0.1413 × 94.3 = 13.32 m-1. (ii) κ(AgNO3) = cell constant/R = 13.32/50.3 = 0.2648 ohm-1 m-1.
Answer: 13.32 m-1; 2.648 × 10-1 ohm-1 m-1.
Teacher's Note: Calibrate with a standard KCl solution to get the cell constant, then reuse it.
Exam Note: Cell constant = κknown × Rmeasured.
Practice Problem 45. A conductance cell was calibrated by filling it with a 0.02 M potassium chloride solution (specific conductance = 0.2768 ohm-1 m-1) and measuring the resistance at 298 K which was found to be 457.3 ohm. The cell was then filled with a calcium chloride solution containing 0.555 g of CaCl2 per litre. The measured resistance was 1050 ohm. Calculate the molar conductivity of CaCl2 solution.
Solution. Cell constant = 0.2768 × 457.3 = 126.6 m-1. κ(CaCl2) = 126.6 × (1/1050) = 0.1206 ohm-1 m-1. Concentration = 0.555/111.0 = 0.005 mol dm-3 = 5 mol m-3. Λm = κ/c = 0.1206/5 = 0.0241 mho m2 mol-1.
Answer: 0.0241 mho m2 mol-1.
Teacher's Note: Use SI: concentration in mol m-3 so Λm = κ/c comes out in S m2 mol-1.
Exam Note: Convert mol dm-3 to mol m-3 (×1000).
Practice Problem 46. The molar conductivities at infinite dilution of KCl, KNO3 and AgNO3 at 298 K are 0.01499 mho m2 mol-1, 0.01250 mho m2 mol-1 and 0.01334 mho m2 mol-1 respectively. What is the molar conductivity at infinite dilution of AgCl at this temperature?
Solution. By Kohlrausch law: Λ∞(AgCl) = Λ∞(AgNO3) + Λ∞(KCl) − Λ∞(KNO3) = 0.01334 + 0.01499 − 0.01250 = 0.01583 mho m2 mol-1.
Answer (printed): 0.01383. Corrected: 0.01583 mho m2 mol-1 (the printed value is an arithmetic slip).
Teacher's Note: Combine Ag+ from AgNO3 with Cl- from KCl; subtract KNO3 to cancel K+ and NO3-.
Exam Note: Add AgNO3 and KCl, subtract KNO3.
Practice Problem 47. The electrodes in a conductivity cell have area 1.2 × 10-4 m2 and they are fixed 3 × 10-3 m apart. A solution containing 200 g equivalent of the electrolyte per m3 of the solution has a resistance of 60 ohm at 298 K. Calculate the equivalent conductivity of the solution.
Solution. κ = (1/R)(l/A) = (1/60) × (3 × 10-3/1.2 × 10-4) = 25/60 = 0.4167 ohm-1 m-1. Λe = κ/C = 0.4167/200 = 2.08 × 10-3 mho m2 eq-1.
Answer (printed): 2.09 × 10-2. Corrected: 2.08 × 10-3 mho m2 eq-1 (the printed answer is ten times too large for the data given).
Teacher's Note: κ from geometry and resistance; divide by equivalents per m3 for Λe in SI units.
Exam Note: Use C in eq m-3 with κ in S m-1.
Practice Problem 48. The molar conductivities of NH4+ ion and Cl- ion are 73.5 mho cm2 mol-1 and 76.2 mho cm2 mol-1 respectively. The specific conductivity of 0.1 M NH4Cl is 1.288 × 10-2 mho cm-1. What is the dissociation constant of NH4Cl?
Solution. Λ∞ = 73.5 + 76.2 = 149.7. Λm = κ × 1000/C = 1.288 × 10-2 × 1000/0.1 = 128.8. α = Λm/Λ∞ = 128.8/149.7 = 0.86.
Answer: 0.86. (This is the degree of dissociation α; the corresponding K = Cα2/(1 − α) ≈ 0.53 mol L-1.)
Teacher's Note: Degree of dissociation = Λm/Λ∞ with Λ∞ from the sum of ionic conductivities.
Exam Note: Note: the printed 0.86 is α, not K.
Practice Problem 49. The specific conductivity of a saturated solution of silver chloride at 18°C is 1.24 × 10-6 mho after subtracting that of water. Ionic conductances at infinite dilution of Ag+ and Cl- ions at this temperature are 53.8 and 65.3 respectively. Calculate the solubility of silver chloride in gram per litre.
Solution. Λ∞ = 53.8 + 65.3 = 119.1. Solubility S (mol L-1) = κ × 1000/Λ∞ = 1.24 × 10-6 × 1000/119.1 = 1.041 × 10-5 mol L-1. In g L-1: 1.041 × 10-5 × 143.5 = 1.494 × 10-3.
Answer: 1.494 × 10-3 g per litre.
Teacher's Note: Saturated sparingly soluble salt is effectively infinitely dilute, so Λ = Λ∞.
Exam Note: Subtract water's conductivity first; M(AgCl) = 143.5.
Practice Problem 50. Given: λ∞[½ Mg2+] = 53.06 ohm-1 cm2 mol-1, λ∞[½ SO42-] = 80 ohm-1 cm2 mol-1, λ∞[⅓ Al3+] = 63 ohm-1 cm2 mol-1. Calculate the values of Λm∞[Al2(SO4)3] and Λ∞[MgSO4].
Solution. Al2(SO4)3 has 2 Al3+ (each = 3 × λ[⅓Al3+]) and 3 SO42- (each = 2 × λ[½SO42-]): Λm∞ = 6(63) + 6(80) = 378 + 480 = 858. MgSO4: 2(53.06) + 2(80) = 266.12.
Answer: 858 ohm-1 cm2 mol-1, 266.12 ohm-1 cm2 mol-1.
Teacher's Note: Convert equivalent ionic conductances to molar by multiplying by ion charge, then count ions per formula.
Exam Note: Multiply by total charge (6 for Al2(SO4)3).
Practice Problem 51. Hydrofluoric acid is a weak acid. At 25°C, the molar conductivity of 0.002 M HF is 176.2 ohm-1 cm2 mol-1. If its Λm∞ = 405.2 ohm-1 cm2 mol-1, calculate its degree of dissociation and equilibrium constant at the given concentration.
Solution. α = Λm/Λm∞ = 176.2/405.2 = 0.435. K = Cα2/(1 − α) = 0.002 × (0.435)2/(1 − 0.435) = 6.7 × 10-4.
Answer: α = 0.435, K = 6.7 × 10-4.
Teacher's Note: Ostwald dilution: α from conductivity ratio, then K = Cα2/(1 − α).
Exam Note: Do not drop the (1 − α) in the denominator.
Practice Problem 52. For mercury at 0°C specific conductance, κ = 1.062963 × 106 S/m. (a) If the resistance of a cell containing mercury is 0.243166 ohm, what is the cell constant of the cell? (b) If the same cell is filled with KCl solution at 0°C, the resistance of the cell is 3.966 × 104 ohm. What is the conductivity of KCl solution? (c) If the average cross-sectional area of the cell is 0.9643 mm2, what is the effective distance between the electrodes?
Solution. (a) Cell constant = κR = 1.062963 × 106 × 0.243166 = 2.58476 × 105 m-1. (b) κ = cell constant/R = 2.58476 × 105/3.966 × 104 = 6.517 S m-1. (c) l = cell constant × A = 2.58476 × 105 × 0.9643 × 10-6 = 0.2492 m.
Answer: (a) 2.58476 × 105 (m-1; printed with unit S/m); (b) 6.517 S/m; (c) 0.2492 m.
Teacher's Note: Mercury of known κ calibrates the cell; cell constant is l/A in m-1.
Exam Note: Convert mm2 to m2 (×10-6).
Practice Problem 53. The mobility of the NH4+ ions is 7.623 × 10-8 m2/Vs. Calculate: (a) the molar conductivity of NH4+ ion; (b) velocity of the ion if 15 volt are applied across the electrodes 25 cm apart.
Solution. (a) λ = uF = 7.623 × 10-8 × 96500 = 7.355 × 10-3 S m2/mol = 73.55 × 10-4. (b) Field = 15/0.25 = 60 V/m; velocity = u × E = 7.623 × 10-8 × 60 = 4.574 × 10-6 m/s = 4.574 μm/s.
Answer: (a) 73.55 × 10-4 S m2/mol; (b) 4.574 μm/s.
Teacher's Note: Ionic conductivity = mobility × F; drift velocity = mobility × field strength.
Exam Note: Field = V/d with d in metres.
Practice Problem 54. Construct electric cells for the following reactions: (a) Fe + Cu2+ → Cu + Fe2+ (b) Cu + 2Ag+ → 2Ag + Cu2+ (c) 6Fe2+ + Cr2O72- + 14H+ → 6Fe3+ + 2Cr3+ + 7H2O (d) Cd + I2 → Cd2+ + 2I- (e) 2Fe3+ + 2Cl- → 2Fe2+ + Cl2
Solution. Put the oxidation half on the left (anode) and the reduction half on the right (cathode).
(a) Fe | Fe2+ || Cu2+ | Cu
(b) Cu | Cu2+ || Ag+ | Ag
(c) Pt | Fe2+, Fe3+ || H+, Cr2O72-, Cr3+ | Pt
(d) Cd | Cd2+ || I-, I2 | Pt
(e) Pt | Cl2, Cl- || Fe3+, Fe2+ | Pt
Teacher's Note: Anode on left (species oxidised), cathode on right; use inert Pt where no metal electrode exists.
Exam Note: Oxidation on left, reduction on right; Pt for redox couples.
Practice Problem 55. Predict whether the following reaction will occur spontaneously or not: Co2+ + Sn → Co + Sn2+. E°Co/Co2+ = 0.277 volt and E°Sn/Sn2+ = 0.136 volt
Solution. Sn is oxidised and Co2+ is reduced. E°cell = E°(oxidation of Sn) + E°(reduction of Co2+) = 0.136 + (−0.277) = −0.141 V, which is negative.
Answer: No; E°cell is negative = −0.141 volt.
Teacher's Note: The given values are oxidation potentials; reverse the sign of Co's value for its reduction.
Exam Note: Negative E°cell: reaction not spontaneous.
Practice Problem 56. An iron wire is immersed in a solution containing ZnSO4 and NiSO4. Predict giving reasons which of the following reactions is likely to proceed? (i) Iron reduces Zn2+ ions (ii) Iron reduces Ni2+ ions. Given: E°Zn2+/Zn = −0.76 volt; E°Fe2+/Fe = −0.44 volt and E°Ni2+/Ni = −0.25 volt.
Solution. (i) Fe + Zn2+ → Fe2+ + Zn: E°cell = −0.76 + 0.44 = −0.32 V (negative; not possible). (ii) Fe + Ni2+ → Fe2+ + Ni: E°cell = −0.25 + 0.44 = +0.19 V (positive).
Answer: Iron reduces Ni2+ ions as the E°cell in this case has positive value.
Teacher's Note: Iron reduces only ions whose reduction potential is higher (less negative) than Fe's −0.44 V.
Exam Note: Compare E°(Fe) with E° of each metal ion.
Practice Problem 57. Can a solution of 1 M CuSO4 be stored in a vessel made of nickel metal? Given: E°Ni2+/Ni = −0.25 volt; E°Cu2+/Cu = 0.34 volt
Solution. Ni + Cu2+ → Ni2+ + Cu: E°cell = 0.34 − (−0.25) = +0.59 V, positive, so nickel is attacked by Cu2+.
Answer: No; the reaction takes place between CuSO4 and nickel as E°cell is positive.
Teacher's Note: A metal vessel is attacked if its metal can reduce the stored ion spontaneously.
Exam Note: Positive E°cell: nickel dissolves, copper deposits.
Practice Problem 58. Answer whether, under standard conditions, the following reactions are possible or not: (i) Will copper reduce Ag+ to Ag? Given: E°Ag+/Ag = 0.799 volt; E°Cu2+/Cu = −0.337 volt (as printed) (ii) Will Fe3+ be reduced to Fe2+ by Sn2+ ion? Given: Fe3+ | Fe2+ = 0.771 volt; Sn2+ | Sn4+ = −0.250 volt (iii) Would you use a silver spoon to stir a solution of Cu(NO3)2?
Solution. (i) Cu | Cu2+ || Ag+ | Ag: E°cell = 0.799 − 0.337 = +0.462 V (positive), so yes. (ii) Pt | Sn4+, Sn2+ || Fe3+, Fe2+ | Pt: positive, so yes. Corrected: printed answer +0.621 V uses Sn2+|Sn4+ = −0.150 V; with the printed −0.250 V, E°cell = 0.771 − 0.250 = +0.521 V, still positive. (iii) Ag + Cu2+ would have E°cell = 0.337 − 0.799 = −0.462 V, so no reaction occurs.
Answer: (i) Yes, E°cell (Cu | Cu2+ || Ag+ | Ag) is positive (+0.462 volt). (ii) Yes, E°cell (Pt | Sn4+, Sn2+ || Fe3+, Fe2+ | Pt) is positive. (iii) Yes, the reaction does not occur.
Teacher's Note: A reaction is possible if E°cell = E°cathode − E°anode is positive; silver cannot reduce Cu2+.
Exam Note: Positive E°cell: feasible; negative: spoon is safe.
Practice Problem 59. The electrode potentials of two half reactions are as follows: Fe3+ + e- → Fe2+; E° = +0.76 volt; Ce4+ + e- → Ce3+; E° = +1.60 volt. Giving reason, describe if Ce3+ can be oxidised by Fe3+.
Solution. Ce3+ → Ce4+ + e- (oxidation), E° = −1.60 V; Fe3+ + e- → Fe2+ (reduction), E° = +0.76 V. Adding: E°cell = −1.60 + 0.76 = −0.84 V.
Answer: E° of the reaction = −0.84 volt; the oxidation of Ce3+ by Fe3+ is not possible.
Teacher's Note: Fe3+ (0.76 V) is a weaker oxidant than Ce4+ (1.60 V); weaker oxidant cannot oxidise Ce3+.
Exam Note: Give E°cell sign as the reason.
Practice Problem 60. Calculate the standard reduction potential of Ni2+/Ni electrode when the emf of the cell Ni | Ni2+ (1 M) || Cu2+ (1 M) | Cu is 0.59 volt and E°Cu2+/Cu = +0.34 volt
Solution. E°cell = E°(cathode) − E°(anode): 0.59 = 0.34 − E°Ni2+/Ni, so E°Ni2+/Ni = 0.34 − 0.59 = −0.25 V.
Answer: −0.25 volt.
Teacher's Note: At 1 M both sides, the emf is E°cell; subtract from the cathode potential.
Exam Note: Cathode minus anode; both are reduction potentials.
Practice Problem 61. Calculate the half-cell potential at 298 K for the reaction, Zn2+ + 2e- → Zn if [Zn2+] = 0.1 M and E° = −0.76 volt.
Solution. E = E° + (0.0591/2) log [Zn2+] = −0.76 + 0.02955 × log 0.1 = −0.76 − 0.02955 = −0.7896 V.
Answer: −0.789 volt.
Teacher's Note: Reduction-potential Nernst equation: E = E° + (0.0591/n) log [ion].
Exam Note: log 0.1 = −1; lower concentration lowers E.
Practice Problem 62. A galvanic cell consists of a metallic zinc plate immersed in 0.1 M Zn(NO3)2 solution (and a lead plate in Pb(NO3)2 solution). Calculate the emf of the cell at 25°C. Write the chemical equations for the electrode reactions and represent the cell. (Given: E°Zn2+/Zn = −0.76 volt and E°Pb2+/Pb = −0.13 volt)
Solution. Anode: Zn → Zn2+ + 2e-; cathode: Pb2+ + 2e- → Pb. Cell: Zn | Zn2+ (0.1 M) || Pb2+ (0.02 M) | Pb. E°cell = −0.13 + 0.76 = 0.63 V. Ecell = 0.63 − (0.0591/2) log (0.1/0.02) = 0.63 − 0.0207 = 0.609 V. (The printed question omits the Pb2+ concentration; 0.02 M is taken from the printed cell diagram in the answer.)
Answer: E°cell = 0.63 volt; Ecell = 0.609 volt.
Teacher's Note: Nernst with Q = [Zn2+]/[Pb2+]; E°cell = E°cathode − E°anode.
Exam Note: Write anode, cathode, and cell notation clearly.
Practice Problem 63. Calculate the cell potential of the cell at 25°C having the cell reaction: 2Ag+ + Cu ⇌ 2Ag + Cu2+ (Given that, [Ag+] = 1.0 × 10-3 M, [Cu2+] = 1.0 × 10-4 M, E°cell = 0.46 volt)
Solution. E = E° − (0.0591/2) log ([Cu2+]/[Ag+]2) = 0.46 − 0.02955 log (10-4/10-6) = 0.46 − 0.02955 × 2 = 0.401 V.
Answer: 0.40 volt.
Teacher's Note: Q = [Cu2+]/[Ag+]2; silver term is squared, n = 2.
Exam Note: Square [Ag+] in Q.
Practice Problem 64. Calculate the E and E° of the cell Ni | Ni2+ || Cu2+ | Cu from the following half-cell reactions: Ni2+ + 2e- → Ni; E° = −0.25 volt; Cu2+ + 2e- → Cu; E° = +0.34 volt (Given: [Ni2+] = 1 M and [Cu2+] = 10-3 M)
Solution. E°cell = 0.34 + 0.25 = 0.59 V. E = E° − (0.0591/2) log ([Ni2+]/[Cu2+]) = 0.59 − 0.02955 log (1/10-3) = 0.59 − 0.0886 = 0.5014 V.
Answer: E°cell = 0.59 volt; Ecell = 0.5015 volt.
Teacher's Note: Lower [Cu2+] at the cathode reduces the emf below E°.
Exam Note: Q = [Ni2+]/[Cu2+] = 103, n = 2.
Practice Problem 65. Use E° values to calculate ΔG° for the reaction Fe2+ + Ag+ → Fe3+ + Ag. E°Ag+/Ag = 0.80 volt and E°Pt/Fe3+, Fe2+ = 0.77 volt. [Hint: E°cell = 0.03 volt, ΔG° = −nFE°cell]
Solution. E°cell = 0.80 − 0.77 = 0.03 V, n = 1. ΔG° = −1 × 96500 × 0.03 = −2895 J.
Answer: −2895 J.
Teacher's Note: One electron transferred; ΔG° = −nFE°.
Exam Note: Quote ΔG° in J, negative for spontaneous.
Practice Problem 66. A piece of zinc metal is dipped in a 0.1 M solution of zinc salt. The salt is dissociated to the extent of 20%. Calculate the electrode potential of Zn2+/Zn. (Given: E°Zn2+/Zn = −0.76 volt.) [Hint: [Zn2+] = 0.1 × 0.2 = 0.02 M]
Solution. [Zn2+] = 0.1 × 0.2 = 0.02 M. Zn2+ + 2e- → Zn: E = E° + (0.0591/2) log [Zn2+] = −0.76 + 0.02955 × log 0.02 = −0.76 − 0.0502 = −0.8102 V.
Answer: −0.8102 volt.
Teacher's Note: Only the dissociated fraction gives Zn2+ ions, so [Zn2+] = αC.
Exam Note: Use effective [Zn2+] = α × C, not C.
Practice Problem 67. Estimate the concentration limit beyond which the half-cell potential of Cu2+ | Cu will be zero. E°Cu2+/Cu = 0.34 volt. [Hint: E°Cu2+/Cu = (0.0591/2) log [Cu2+]]
Solution. Set E = 0: 0 = 0.34 + (0.0591/2) log [Cu2+], so log [Cu2+] = −(2 × 0.34)/0.0591 = −11.5, [Cu2+] = 3.1 × 10-12 mol L-1.
Answer: 3.1 × 10-12 mol L-1.
Teacher's Note: Half-cell potential falls by 0.02955 V per tenfold dilution, reaching zero at a very small concentration.
Exam Note: Set E = 0 and solve for the log.
Practice Problem 68. Calculate equilibrium constant for the following reaction: Zn + CuSO4 → ZnSO4 + Cu. E°Zn/Zn2+ = 0.765 volt; E°Cu2+/Cu = 0.347 volt
Solution. E°cell = 0.765 + 0.347 = 1.112 V, n = 2. log K = nE°/0.0591 = (2 × 1.112)/0.0591 = 37.63, K = 4.3 × 1037.
Answer (printed): 1.862 × 1037. Corrected: K = 4.3 × 1037 with the printed E° values (the printed K corresponds to E° near 1.10 V).
Teacher's Note: Zn oxidation 0.765 V plus Cu reduction 0.347 V gives E°cell; then log K = nE°/0.0591.
Exam Note: Use n = 2 and add the potentials.
Practice Problem 69. For the cell reaction, Ni | Ni2+ || Ag+ | Ag. Calculate the equilibrium constant at 25°C. How much maximum work would be obtained by the operation of this cell? (E°Ni2+/Ni = −0.25 V, E°Ag+/Ag = +0.80 V)
Solution. E°cell = 0.80 + 0.25 = 1.05 V; n = 2. log K = (2 × 1.05)/0.059 = 35.6, K ≈ 4 × 1035. Maximum work = nFE° = 2 × 96500 × 1.05 = 202650 J.
Answer: K = 3.98 × 1035, maximum work = 202650 J. (Using 0.0591 instead of 0.059 gives K = 3.4 × 1035.)
Teacher's Note: Same E°cell gives both K and maximum electrical work nFE°.
Exam Note: State work in joules.
Practice Problem 70. Calculate the emf of the cell Cr | Cr3+ (0.1 M) || Fe2+ (0.01 M) | Fe (Given: E°Cr3+/Cr = −0.75 volt; E°Fe2+/Fe = −0.45 volt)
Solution. Cell reaction: 2Cr + 3Fe2+ → 2Cr3+ + 3Fe, n = 6. E°cell = −0.45 + 0.75 = 0.30 V. E = 0.30 − (0.0591/6) log ([Cr3+]2/[Fe2+]3) = 0.30 − 0.00985 log (10-2/10-6) = 0.30 − 0.0394 = 0.2606 V.
Answer: 0.261 volt.
Teacher's Note: Balance electrons first (n = 6), then Q = [Cr3+]2/[Fe2+]3.
Exam Note: LCM of electrons: n = 6, not 2 or 3.
Practice Problem 71. Calculate the equilibrium constant for the reaction, Zn(s) + Ag2O(s) + H2O(l) → 2Ag(s) + Zn2+(aq.) + 2OH-(aq.) when E°cell = 1.11 at 298 K.
Solution. n = 2. log K = nE°/0.0591 = (2 × 1.11)/0.0591 = 37.6, so K ≈ 3.5 × 1037 (3.7 × 1037 with exactly 0.0591).
Answer: Kc = 3.499 × 1037.
Teacher's Note: Two electrons transferred; K from log K = nE°/0.0591 at 298 K.
Exam Note: Constant depends on rounding of 0.0591; give ~1037.
Practice Problem 72. The standard reduction potential of Ag+ | Ag electrode is 0.80 volt. Calculate the standard electrode potential of Cl- | AgCl | Ag at 25°C. Given solubility product, Ksp(AgCl) = 1.8 × 10-10. [Hint: Apply E°cell = 0.0591 log [Ag+][Cl-] = 0.0591 log Ksp(AgCl)]
Solution. E°cell = 0.0591 log Ksp = 0.0591 log (1.8 × 10-10) = −0.576 V. E°cell = oxid. pot. anode + red. pot. cathode: red. pot. cathode [Cl- | AgCl | Ag] = −0.576 − (−0.80) = −0.576 + 0.80 = 0.224 volt.
Answer: 0.224 volt.
Teacher's Note: AgCl dissolution cell: E° = 0.0591 log Ksp; subtract Ag oxidation potential to get E° of AgCl/Ag.
Exam Note: E°(AgCl/Ag) = E°(Ag+/Ag) + 0.0591 log Ksp.
Practice Problem 73. Derive Nernst equation for the cell Ni(s) | Ni2+(aq. 0.1 M) || Ag+(aq. 0.1 M) | Ag(s) and also find its cell potential. Given: E°Ag+/Ag = 0.80 volt and E°Ni2+/Ni = −0.25 volt
Solution. Cell reaction: Ni + 2Ag+ → 2Ag + Ni2+; E°cell = 1.05 V; n = 2. Nernst equation: Ecell = E°cell − (0.0591/2) log ([Ni2+]/[Ag+]2) = (1.05 − 0.0295) = 1.02 volt.
Answer: 1.02 volt.
Teacher's Note: Write Q from the balanced reaction (solids omitted) and use n = 2.
Exam Note: Show reaction, Q, and substitution.
Practice Problem 74. Determine the equilibrium constant of the following reaction at 298 K: 2Fe3+ + Sn2+ → 2Fe2+ + Sn4+ (Given: E°Sn4+/Sn2+ = 0.15 volt, E°Fe3+/Fe2+ = 0.771 volt)
Solution. E°cell = 0.771 − 0.15 = 0.621 V; n = 2. log K = (2 × 0.621)/0.0591 = 21.0, K = 1.0 × 1021.
Answer: K = 1.0 × 1021.
Teacher's Note: Two electrons transfer (2Fe3+ to Sn2+); K from log K = nE°/0.0591.
Exam Note: Use n = 2, E°cell = 0.621 V.
Practice Problem 75. The zinc-silver oxide cell is used in hearing aids and electric watches. From the following data: Zn2+ + 2e- → Zn; E° = −0.76 volt; Ag2O + H2O + 2e- → 2Ag + 2OH-; E° = 0.334 volt. Answer the following: (a) Construct the cell and what will be its emf? (b) What is its cell reaction and what will be ΔG° value of this cell reaction? (c) Name the species which undergo oxidation and reduction when the cell is in operation.
Solution. (a) Cell: Zn | Zn2+ || OH- | Ag2O | Ag. E°cell = 0.334 + 0.76 = 1.094 V. (b) Cell reaction: Ag2O + H2O + Zn → 2Ag + Zn2+ + 2OH-; ΔG° = −nFE°cell = −2 × 96500 × 1.094 = −211142 J. (c) Zinc is oxidised to Zn2+ and Ag2O is reduced to Ag.
Answer (printed): E°cell = 1.104 volt, ΔG° = −213072 J. Corrected: with the given E° = 0.334 V, E°cell = 1.094 V and ΔG° = −211142 J (printed values correspond to 0.344 V).
Teacher's Note: Zn is the anode (E° −0.76 V), Ag2O the cathode; ΔG° = −nFE°.
Exam Note: Add oxidation of Zn and reduction of Ag2O potentials.
Step-by-Step OP Tandon Solutions for JEE Math
Download OP Tandon Solutions for JEE
Explore reliable mathematical solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 12 Electrochemistry Part 2 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with OP Tandon Solutions
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.