OP Tandon Solutions Physical Chemistry IIT JEE Chapter 12 Electrochemistry Part 1

Official OP Tandon Textbook Solutions: JEE Chemistry Chapter 12 Electrochemistry

Access comprehensive textbook solutions for Chapter 12 Electrochemistry using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Chemistry: Chapter 12 Electrochemistry

View or download the dedicated Chapter 12 Electrochemistry solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

OP Tandon Physical Chemistry Chapter 12 Electrochemistry - Part 1 (Introduction to Electrochemical Cell, pages 777-804)

Section: Some Solved Examples

Example 1. Find the charge in coulomb on 1 g-ion of N3−.

Solution. Charge on one ion of N3− = 3 × 1.6 × 10−19 C. One g-ion = 6.02 × 1023 ions, so charge on 1 g-ion = 3 × 1.6 × 10−19 × 6.02 × 1023 = 2.89 × 105 coulomb.

Teacher's Note: Charge on a g-ion = ionic charge × e × Avogadro number.

Exam Note: Show multiplication of ionic charge, e and NA.

Example 2. How much charge is required to reduce (a) 1 mole of Al3+ to Al and (b) 1 mole of MnO4− to Mn2+?

Solution. (a) Al3+ + 3e− → Al. 3 moles of electrons are needed per mole, so Q = 3 × F = 3 × 96500 = 289500 coulomb.
(b) MnO4− + 8H+ + 5e− → Mn2+ + 4H2O. Q = 5 × F = 5 × 96500 = 482500 coulomb.

Teacher's Note: Charge = (electrons per ion) × F; get n from the half-reaction.

Exam Note: Write the half-reaction first to earn the n-factor mark.

Example 3. How much electric charge is required to oxidise (a) 1 mole of H2O to O2 and (b) 1 mole of FeO to Fe2O3?

Solution. (a) H2O → ½O2 + 2H+ + 2e−. Q = 2 × F = 2 × 96500 = 193000 coulomb.
(b) FeO + ½H2O → ½Fe2O3 + H+ + e−. Q = F = 96500 coulomb.

Teacher's Note: Fe(II) to Fe(III) loses one electron per FeO; water loses two.

Exam Note: Balance electrons in the half-reaction before using Q = nF.

Example 4. Exactly 0.4 faraday electric charge is passed through three electrolytic cells in series, first containing AgNO3, second CuSO4 and third FeCl3 solution. How many grams of each metal will be deposited assuming only cathodic reaction in each cell?

Solution. Cathodic reactions: Ag+ + e− → Ag (108 g per 1 F); Cu2+ + 2e− → Cu (63.5 g per 2 F); Fe3+ + 3e− → Fe (56 g per 3 F).
Ag deposited = 108 × 0.4 = 43.2 g
Cu deposited = (63.5/2) × 0.4 = 12.7 g
Fe deposited = (56/3) × 0.4 = 7.47 g

Teacher's Note: Same charge in series: mass = (molar mass / ion charge) × faradays.

Exam Note: Divide molar mass by charge on ion for each cell.

Example 5. An electric current of 100 ampere is passed through a molten liquid of sodium chloride for 5 hours. Calculate the volume of chlorine gas liberated at the electrode at NTP.

Solution. Anode: 2Cl− → Cl2 + 2e− (71.0 g Cl2 per 2 × 96500 C).
Q = I × t = 100 × 5 × 60 × 60 coulomb.
Moles of Cl2 = (1/(2 × 96500)) × 100 × 5 × 60 × 60 = 9.3264 mol.
Volume at NTP = 9.3264 × 22.4 = 208.91 L.

Teacher's Note: Convert hours to seconds; 2 F liberates 1 mol Cl2.

Exam Note: Use 22.4 L/mol at NTP; give unit L.

Example 6. A 100 watt, 110 volt incandescent lamp is connected in series with an electrolytic cell containing cadmium sulphate solution. What mass of cadmium will be deposited by the current flowing for 10 hours?

Solution. Watt = ampere × volt, so 100 = I × 110 and I = 100/110 A.
Q = (100/110) × 10 × 60 × 60 coulomb.
Cd2+ + 2e− → Cd (112.4 g per 2 × 96500 C).
Mass of Cd = (112.4/(2 × 96500)) × (100/110) × 10 × 60 × 60 = 19.0598 g.

Teacher's Note: Get current from power P = VI, then apply Faraday.

Exam Note: Find I from watts and volts before computing charge.

Example 7. In an electrolysis experiment, a current was passed for 5 hours through two cells connected in series. The first cell contains a solution of gold salt and the second cell contains copper sulphate solution. 9.85 g of gold was deposited in the first cell. If the oxidation number of gold is +3, find the amount of copper deposited on the cathode in the second cell. Also calculate the magnitude of the current in ampere.

Solution. Mass of Au / Mass of Cu = Eq. mass of Au / Eq. mass of Cu; Eq. mass of Au = 197/3, Eq. mass of Cu = 63.5/2.
Mass of copper = 9.85 × (63.5/2) × (3/197) = 4.7625 g.
Z for Cu = E/96500 = 63.5/(2 × 96500). Using W = Z × I × t with t = 5 × 3600 s:
4.7625 = (63.5/(2 × 96500)) × I × 5 × 3600
I = 4.7625 × 2 × 96500/(63.5 × 5 × 3600) = 0.804 ampere.

Teacher's Note: Series cells: masses are in ratio of equivalent masses.

Exam Note: Use equivalent-mass ratio, then W = ZIt for the current.

Example 8. How long has a current of 3 ampere to be applied through a solution of silver nitrate to coat a metal surface of 80 cm2 with 0.005 mm thick layer? Density of silver is 10.5 g/cm3.

Solution. Mass of silver = volume × density = area × thickness × density = 80 × 0.0005 × 10.5 = 0.42 g (0.005 mm = 0.0005 cm).
Z = 108/96500 g. W = Z × I × t, so 0.42 = (108/96500) × 3 × t.
t = 0.42 × 96500/(108 × 3) = 125.09 second.

Teacher's Note: Convert mm to cm; mass of coating = area × thickness × density.

Exam Note: Unit conversion of thickness is where marks are lost.

Example 9. What current strength in ampere will be required to liberate 10 g of chlorine from sodium chloride solution in one hour?

Solution. E for chlorine = 35.5. E = Z × 96500, so Z = 35.5/96500 g.
W = Z × I × t with W = 10 g, t = 60 × 60 = 3600 s:
I = 10 × 96500/(35.5 × 3600) = 7.55 ampere.

Teacher's Note: Use W = ZIt with Z = E/96500.

Exam Note: Convert one hour to 3600 s.

Example 10. 0.2964 g of copper was deposited on passage of a current of 0.5 ampere for 30 minutes through a solution of copper sulphate. Calculate the atomic mass of copper. (1 faraday = 96500 coulomb)

Solution. Quantity of charge passed = 0.5 × 30 × 60 = 900 coulomb.
900 coulomb deposit 0.2964 g, so 96500 coulomb deposit (0.2964/900) × 96500 = 31.78 g.
Thus equivalent mass of copper = 31.78.
At. mass = Eq. mass × valency = 31.78 × 2 = 63.56.

Teacher's Note: Mass deposited by 1 F is the equivalent mass; multiply by valency.

Exam Note: Do not forget valency 2 to reach atomic mass.

Example 11. 19 g of molten SnCl2 is electrolysed for some time using inert electrodes until 0.119 g of Sn is deposited at the cathode. No substance is lost during electrolysis. Find the ratio of the masses of SnCl2 : SnCl4 after electrolysis.

Solution. Reaction: 2SnCl2 → SnCl4 + Sn (2 × 190 g gives 261 g SnCl4 and 119 g Sn).
119 g Sn comes from 380 g SnCl2, so 0.119 g Sn comes from 380 × 0.119/119 = 0.380 g SnCl2.
Remaining SnCl2 = 19 − 0.380 = 18.62 g.
380 g SnCl2 gives 261 g SnCl4, so 0.380 g gives (261/380) × 0.380 = 0.261 g SnCl4.
Ratio SnCl2 : SnCl4 = 18.62/0.261 = 71.34 : 1.

Teacher's Note: Net reaction is disproportionation-like; use stoichiometry, not Faraday.

Exam Note: Write the net reaction to link Sn mass to SnCl4 formed.

Example 12. A current of 2.68 ampere is passed for one hour in an aqueous solution of copper sulphate using copper electrodes. Calculate the change in mass of cathode and that of the anode. (At. mass of copper = 63.5)

Solution. Cathode: Cu2+ + 2e− → Cu. Anode: Cu → Cu2+ + 2e−.
Thus cathode increases in mass as copper is deposited on it, and the anode decreases in mass as copper dissolves from it.
Charge passed = 2.68 × 60 × 60 coulomb.
Copper deposited or dissolved = (63.5/(2 × 96500)) × 2.68 × 60 × 60 = 3.174 g.
Increase in mass of cathode = decrease in mass of anode = 3.174 g.

Teacher's Note: Active copper anode dissolves; same mass moves to cathode.

Exam Note: State both signs: cathode gains, anode loses equal mass.

Example 13. An ammeter and a copper voltameter are connected in series through which a constant current flows. The ammeter shows 0.52 ampere. If 0.635 g of copper is deposited in one hour, what is the percentage error of the ammeter? (At. mass of copper = 63.5)

Solution. Cu2+ + 2e− → Cu. 63.5 g Cu needs 2 × 96500 C, so 0.635 g needs (2 × 96500/63.5) × 0.635 = 2 × 965 = 1930 coulomb.
Q = I × t gives 1930 = I × 60 × 60, so I = 1930/3600 = 0.536 ampere.
Percentage error = (0.536 − 0.52)/0.536 × 100 = 2.985%.

Teacher's Note: True current comes from voltameter mass; compare with ammeter reading.

Exam Note: Divide the error by the true current, not the reading.

Example 14. A current of 3.7 ampere is passed for 6 hours between platinum electrodes in 0.5 litre of a 2 M solution of Ni(NO3)2. What will be the molarity of the solution at the end of the electrolysis? What will be the molarity of the solution if nickel electrodes are used? (1F = 96500 coulomb; Ni = 58.7)

Solution. Reaction: Ni2+ + 2e− → Ni.
Charge passed = 3.7 × 6 × 60 × 60 = 79920 coulomb.
Moles of Ni(NO3)2 decomposed = (1/(2 × 96500)) × 79920 = 0.4140.
Moles present before = 0.5 × 2 = 1.0; after = 1.0 − 0.4140 = 0.586 in 0.5 litre.
Molarity = 2 × 0.586 = 1.172 M.
(Corrected: the source prints this as 1.72 M, which does not match 2 × 0.586.)
When nickel electrodes are used, anodic nickel will dissolve and Ni is deposited at the cathode, so the molarity remains unaffected (2 M).

Teacher's Note: Inert anode: electrolyte depletes; active Ni anode replenishes Ni2+.

Exam Note: Check arithmetic: 0.586 mol in 0.5 L is 1.172 M.

Example 15. An acidic solution of Cu2+ salt containing 0.4 g of Cu2+ is electrolysed until all the copper is deposited. The electrolysis is continued for seven more minutes with volume of solution kept at 100 mL and the current at 1.2 amp. Calculate the gases evolved at NTP during the entire electrolysis.

Solution. 0.4 g of Cu2+ = 0.4/31.75 = 0.0126 g-equivalent.
Oxygen at anode while copper deposits = 0.0126 g-equivalent = (8/32) × 0.0126 = 0.00315 g-mole.
After copper is exhausted, hydrogen at cathode and oxygen at anode. Charge = 1.2 × 7 × 60 = 504 coulomb.
Oxygen = (1/96500) × 504 = 0.00523 g-equivalent = (8/32) × 0.00523 = 0.001307 g-mole.
Hydrogen = 0.00523 g-equivalent = (1/2) × 0.00523 = 0.00261 g-mole.
Total gases = 0.00315 + 0.001307 + 0.00261 = 0.007067 g-mole.
Volume at NTP = 22400 × 0.007067 = 158.3 mL.

Teacher's Note: Two stages: O2 only, then H2 plus O2 after Cu2+ is gone.

Exam Note: Add gas moles from both stages before converting to volume.

Example 16. A current of 1.70 ampere is passed through 300 mL of 0.160 M solution of zinc sulphate for 230 seconds with a current efficiency of 90 per cent. Find out the molarity of Zn2+ ions after the deposition of zinc. Assume the volume of the solution to remain constant during electrolysis. (IIT 1991)

Solution. Actual charge passed = (90/100) × 1.70 × 230 = 351.9 coulomb.
Moles of Zn deposited = (1/(2 × 96500)) × 351.9 = 0.001823.
Molarity of Zn2+ after deposition = 0.160 − 0.001823 × 1000/300 = 0.154 M.

Teacher's Note: Apply efficiency to charge first, then subtract deposited moles.

Exam Note: Efficiency multiplies charge; convert moles to molarity over 300 mL.

Example 17. Calculate the electricity that would be required to reduce 12.3 g of nitrobenzene to aniline, if the current efficiency for the process is 50 per cent. If the potential drop across the cell is 3.0 volt, how much energy will be consumed? [AIPMT (Mains) 2008]

Solution. C6H5NO2 + 3H2 → C6H5NH2 + 2H2O (123 g needs 3 mol H2).
12.3 g = 0.1 mol nitrobenzene; H2 required = 0.3 mol.
Charge for liberating 0.3 mol H2 = 2 × 96500 × 0.3 = 57900 coulomb.
At 50% efficiency, charge required = 2 × 57900 = 115800 coulomb.
Energy consumed = 115800 × 3.0 = 347400 J = 347.4 kJ.

Teacher's Note: Each H2 needs 2 F; low efficiency doubles charge needed.

Exam Note: Energy = charge × voltage; divide ideal charge by efficiency.

Example 18. An aqueous solution of sodium chloride on electrolysis gives H2(g), Cl2(g) and NaOH according to the reaction: 2Cl−(aq) + 2H2O → 2OH−(aq) + H2(g) + Cl2(g). A direct current of 25 ampere with a current efficiency 62% is passed through 20 L of NaCl solution (20% by mass). Write down the reactions taking place at the anode and cathode. How long will it take to produce 1 kg of Cl2? What will be the molarity of the solution with respect to hydroxide ion? Assume no loss due to evaporation. (IIT 1992)

Solution. Anode: 2Cl− → Cl2 + 2e−. Cathode: 2H2O + 2e− → H2 + 2OH−.
1 kg Cl2 = 1000/71.0 = 14.08 mol.
Charge = 2 × 96500 × 14.08 coulomb.
Effective current = (62/100) × 25.0 = 15.5 ampere.
Time = (2 × 96500 × 14.08)/15.5 = 175318.7 second = 48.699 hour.
OH− produced = 2 × moles of Cl2 = 2 × 14.08 = 28.16 mol.
Molarity = 28.16/20 = 1.408 M.

Teacher's Note: Effective current = efficiency × applied current; OH− moles = 2 × Cl2 moles.

Exam Note: Show both electrode equations and the 62% correction.

Example 19. Chromium metal can be plated out from an acidic solution containing CrO3 according to the following reaction: CrO3 + 6H+ + 6e− → Cr + 3H2O. Calculate the mass of chromium plated out by 24000 coulomb. How long will it take to plate out 1.5 g of chromium using 12.5 ampere current? (IIT 1993)

Solution. 6 × 96500 C deposit 52 g Cr.
Mass plated by 24000 C = (52/(6 × 96500)) × 24000 = 2.155 g.
Charge for 1.5 g = (6 × 96500/52) × 1.5 = 16701.92 coulomb.
Time = 16701.92/12.5 = 1336.15 second = 22.27 minute.

Teacher's Note: Six electrons per Cr atom: Cr(VI) to Cr(0).

Exam Note: Use n = 6 from the half-reaction.

Example 20. After electrolysis of a sodium chloride solution with inert electrodes for a certain period of time, 600 mL of the solution was left which was found to be 1 N in NaOH. During the same period 31.75 g of copper was deposited in the copper voltameter in series with the electrolytic cell. Calculate the percentage of theoretical yield of NaOH obtained.

Solution. Equivalent mass of NaOH = 40. Amount of NaOH formed = (40/1000) × 600 = 24 g.
31.75 g of Cu = 1 g-equivalent of Cu, so in the same period 1 g-equivalent of NaOH = 40 g should have been formed.
% yield = (24/40) × 100 = 60.

Teacher's Note: Series cells: equal equivalents; 31.75 g Cu is exactly 1 equivalent.

Exam Note: Compare actual NaOH with 1 equivalent (40 g).

Example 21. Peroxy disulphuric acid (H2S2O8) can be prepared by electrolytic oxidation of H2SO4 as: 2H2SO4 → H2S2O8 + 2H+ + 2e−. Oxygen and hydrogen are by products. In such an electrolysis 9.72 litre of H2 and 2.35 litre of O2 were generated at NTP. What is the mass of peroxy disulphuric acid formed?

Solution. Anodic reactions: 2H2SO4 → H2S2O8 + 2H+ + 2e−; 2H2O → 4H+ + O2 + 4e− (Corrected: the source prints 2e−; the numerical working is unaffected, as it uses equivalents). Cathodic: 2H2O + 2e− → 2OH− + H2.
Equivalents of H2S2O8 + equivalents of O2 = equivalents of H2.
9.72 L H2 = 9.72/11.2 = 0.868 equivalent; 2.35 L O2 = 2.35/5.6 = 0.42 equivalent.
Equivalent of H2S2O8 = 0.868 − 0.420 = 0.448.
Mass = 0.448 × (194/2) = 43.456 g.

Teacher's Note: Electron balance: equivalents at anode products equal equivalents of H2.

Exam Note: Use equivalent volumes 11.2 L (H2) and 5.6 L (O2).

Example 22. Cadmium amalgam is prepared by electrolysis of a solution of CdCl2 using a mercury cathode. Find how long a current of 5 ampere should be passed in order to prepare 12% Cd-Hg amalgam on a cathode of 2 g mercury. At. mass of Cd = 112.40.

Solution. 2 g Hg requires Cd to prepare 12% amalgam = (12/88) × 2 = 0.273 g.
Cd2+ + 2e− → Cd (112.40 g per 2 × 96500 C).
Charge = (2 × 96500/112.40) × 0.273 coulomb.
Time = (2 × 96500 × 0.273)/(112.40 × 5) = 93.75 second.

Teacher's Note: 12% amalgam means 12 g Cd per 88 g Hg.

Exam Note: Cd mass = 12/88 of Hg mass, not 12% of Hg.

Example 23. Assume that impure copper contains iron, gold and silver as impurities. After passing a current of 140 ampere for 482.5 second, the mass of anode decreased by 22.260 g and the cathode increased in mass by 22.011 g. Estimate the percentage of iron and copper originally present.

Solution. The increase at the cathode is due to copper only. Hence there is 22.011 g of copper and the rest are impurities of iron, gold and silver.
Mass of impurities = 22.260 − 22.011 = 0.249 g.
At anode only copper and iron are oxidised; gold and silver collect below the anode as anodic mud: M (copper and iron) → M2+ + 2e−.
Moles of metal oxidised = 140 × 482.5/(2 × 96500) = 0.35.
Moles of copper = 22.011/63.5 = 0.3466; moles of iron = 0.35 − 0.3466 = 0.0034.
Completed (the source solution stops here): mass of iron = 0.0034 × 56 = 0.19 g; % Fe = 0.19/22.260 × 100 ≈ 0.85%; % Cu = 22.011/22.260 × 100 ≈ 98.9%.

Teacher's Note: Cathode gain = Cu only; anode loss also includes Fe, Au, Ag.

Exam Note: Use moles oxidised (n = 2) to split Cu and Fe.

Illustrations of Objective Questions

Question 1. Amount of energy used in the passage of 1 amp current for 100 sec under a potential of 115 V is: (a) 20 kJ (b) 11.5 kJ (c) 115 kJ (d) 0.115 kJ

Solution. Answer: (b) 11.5 kJ. Q = I × t = 1 × 100 = 100 C. Energy = charge × potential = 100 × 115 = 11500 J = 11.5 kJ.

Teacher's Note: Energy = Q × V, with Q = It.

Exam Note: Convert J to kJ for the option.

Question 2. One litre of 1 M CuSO4 is electrolysed. After passing 2F charge, the molarity of CuSO4 will be: (a) M/2 (b) M/4 (c) M (d) zero

Solution. Answer: (d) zero. 2F charge will deposit 2 equivalent or 1 mole of copper: Cu2+ + 2e− → Cu. Thus all the copper from CuSO4 solution will be deposited and the molarity of remaining CuSO4 solution will be zero.

Teacher's Note: 1 L of 1 M holds 1 mol Cu2+, needing exactly 2 F.

Exam Note: Compare moles available with moles deposited by 2F.

Question 3. The time required to coat a metal surface of 80 cm2 with 5 × 10−3 cm thick layer of silver (density 1.05 g/cm3) by passing a current of 3 amp through silver nitrate solution is: (a) 115 sec (b) 125 sec (c) 135 sec (d) 145 sec

Solution. Answer: (b) 125 sec. Mass of silver in coated layer = volume × density = (80 × 5 × 10−3) × 1.05 = 0.42 g. W = IEt/96500, so t = W × 96500/(I × E) = 0.42 × 96500/(3 × 108) = 125.09 sec.

Teacher's Note: Coating mass = area × thickness × density, then ZIt.

Exam Note: Option (b) matches 125.09 s; show formula.

Question 4. 4.5 g of aluminium (At. mass = 27 amu) is deposited at cathode from Al3+ solution by a certain quantity of electric charge. The volume of hydrogen produced at STP from H+ ions in solution by the same quantity of electric charge will be: [CBSE (PMT) 2005] (a) 44.8 L (b) 22.4 L (c) 11.2 L (d) 5.6 L

Solution. Answer: (d) 5.6 L. Equivalents of aluminium deposited = 4.5/9 = 0.5, so equivalents of H2 = 0.5. Volume of H2 at STP = 0.5 × 11.2 = 5.6 L.

Teacher's Note: Same charge means same equivalents; Al equivalent mass is 27/3 = 9.

Exam Note: Use equivalent volume 11.2 L for H2.

Question 5. Cost of electricity for the production of x L H2 at NTP at cathode is Rs x; then cost of production of x L O2 at NTP at anode will be: (assume 1 mole of electrons as one unit of electricity) (a) 2x (b) 4x (c) 16x (d) 32x

Solution. Answer: (a) 2x. Volume of H2/Volume of O2 = equivalent volume of H2/equivalent volume of O2 = 11.2/5.6 = 2. Volume of O2 = x/2 per same electricity, so x/2 L O2 requires Rs x, i.e. x L O2 will require Rs 2x.

Teacher's Note: O2 needs twice the electrons per litre compared with H2.

Exam Note: Use equivalent volumes 11.2 and 5.6 L.

Question 6. What current is to be passed for 0.25 sec for deposition of certain weight of metal which is equal to its electrochemical equivalent? [AMU (Medical) 2006] (a) 4 A (b) 100 A (c) 200 A (d) 2 A

Solution. Answer: (a) 4 A. W = Zit; with W = Z, 1 = I × t = I × 0.25, so I = 4 amp.

Teacher's Note: If W = Z then It = 1 coulomb.

Exam Note: Z is mass deposited by 1 coulomb.

Question 7. If the aqueous solutions of the following salts are electrolysed for 1 hour with 10 ampere current, which solution will deposit the maximum mass of the metal at cathode? The atomic weights are: Fe = 56, Zn = 65, Ag = 108, Hf = 178 and W = 184. [PMT (Kerala) 2006] (a) ZnSO4 (b) FeCl3 (c) HfCl4 (d) WCl6 (e) AgNO3

Solution. Answer: (e) AgNO3. The greater the equivalent mass of the metal, the more will be deposited. Equivalent masses: ZnSO4 65/2 = 32.5; FeCl3 56/3 = 18.66; HfCl4 178/4 = 44.5; WCl6 184/6 = 30.66; AgNO3 108/1 = 108. Maximum is silver.

Teacher's Note: Same charge: mass deposited is proportional to equivalent mass.

Exam Note: Compute atomic mass / charge for each metal.

Question 8. When a quantity of electricity is passed through CuSO4 solution, 0.16 g of copper gets deposited. If the same quantity of electricity is passed through acidulated water, then the volume of H2 liberated at STP will be: (given atomic weight of Cu = 64) (KCET 2006) (a) 4 cm3 (b) 56 cm3 (c) 604 cm3 (d) 8 cm3

Solution. Answer: (b) 56 cm3. Number of equivalents of copper deposited = 0.16/32 = 0.005. Volume of H2 at STP = 11.2 × 0.005 = 0.056 litre = 56 cm3.

Teacher's Note: Equal charge gives equal equivalents of Cu and H2.

Exam Note: Convert litres to cm3 at the end.

Question 9. Number of faraday's required to generate one gram atom of magnesium from molten MgCl2 is: [PMT (MP) 2007] (a) 1 (b) 2 (c) 3 (d) 4

Solution. Answer: (b) 2. Mg2+ + 2e− → Mg. 1 mole Mg atom requires 2 mole of electrons, i.e. 2 faraday of charge.

Teacher's Note: Faradays = moles of electrons = ion charge per atom.

Exam Note: Write Mg2+ + 2e− → Mg.

Question 10. A direct current deposits 54 g of silver during electrolysis. How much aluminium (Atomic mass = 27) would be deposited from aluminium chloride solution by the same amount of electricity? [PMT (Kerala) 2008] (a) 4.5 g (b) 5.4 g (c) 54 g (d) 2.7 g (e) 27 g

Solution. Answer: (a) 4.5 g. Equivalent mass of silver = 108; equivalent mass of aluminium in AlCl3 = 27/3 = 9. WAg/WAl = EAg/EAl: 54/WAl = 108/9, so WAl = 4.5 g.

Teacher's Note: Mass ratio equals equivalent-mass ratio for the same charge.

Exam Note: Use E = 108 for Ag and 9 for Al.

Section II: Conductance and Conductors - Solved Examples

Example 24. 1.0 N solution of a salt surrounding two platinum electrodes 2.1 cm apart and 4.2 sq cm in area was found to offer a resistance of 50 ohm. Calculate the equivalent conductance of the solution.

Solution. Given l = 2.1 cm, a = 4.2 sq cm, R = 50 ohm.
Specific conductance κ = (l/a) × (1/R) = (2.1/4.2) × (1/50) = 0.01 ohm−1 cm−1.
Equivalent conductivity = κ × V, where V = volume containing 1 g-equivalent = 1000 mL.
So equivalent conductance = 0.01 × 1000 = 10 ohm−1 cm2 eq−1.

Teacher's Note: Note κ = (1/R)(l/a) and Λ = κ × 1000/N.

Exam Note: Quote units ohm−1 cm2 eq−1 with the answer.

Example 25. Specific conductance of a decinormal solution of KCl is 0.0112 ohm−1 cm−1. The resistance of a cell containing the solution was found to be 56. What is the cell constant?

Solution. Specific conductance = cell constant × conductance, so cell constant = (specific conductance)/(conductance) = specific conductance × resistance = 0.0112 × 56 = 0.6272 cm−1.

Teacher's Note: Cell constant = κ × R, in cm−1.

Exam Note: Multiply κ by resistance; unit cm−1.

Example 26. The specific conductivity of 0.02 M KCl solution at 25°C is 2.768 × 10−3 ohm−1 cm−1. The resistance of this solution at 25°C when measured with a particular cell was 250.2 ohm. The resistance of 0.01 M CuSO4 solution at 25°C measured with the same cell was 8331 ohm. Calculate the molar conductivity of the copper sulphate solution.

Solution. Cell constant = (sp. cond. of KCl)/(conductance of KCl) = 2.768 × 10−3 × 250.2 = 0.6926 cm−1.
For 0.01 M CuSO4: sp. conductivity = cell constant × conductance = 2.768 × 10−3 × 250.2 × (1/8331).
Molar conductivity = sp. cond. × 1000/C = (2.768 × 10−3 × 250.2/8331) × (1000/0.01) = 8.312 ohm−1 cm2 mol−1.

Teacher's Note: Standard KCl fixes the cell constant; reuse it for the unknown.

Exam Note: Step 1 cell constant, step 2 κ, step 3 molar conductivity.

Example 27. The equivalent conductances of sodium chloride, hydrochloric acid and sodium acetate at infinite dilution are 126.45, 426.16 and 91.0 ohm−1 cm2 eq−1, respectively, at 25°C. Calculate the equivalent conductance of acetic acid at infinite dilution.

Solution. According to Kohlrausch's law:
Λ∞ CH3COONa = λCH3COO− + λNa+ = 91.0 ... (i)
Λ∞ HCl = λH+ + λCl− = 426.16 ... (ii)
Λ∞ NaCl = λNa+ + λCl− = 126.45 ... (iii)
(i) + (ii) − (iii): λCH3COO− + λH+ = 91.0 + 426.16 − 126.45 = 390.7 = Λ∞ CH3COOH = 390.7 ohm−1 cm2 eq−1 (390.71 using the unrounded sum).

Teacher's Note: Weak electrolyte Λ∞ = Λ(salt) + Λ(HCl) − Λ(NaCl).

Exam Note: Combine three strong electrolytes so Na+ and Cl− cancel.

Example 28. The equivalent conductivity of N/10 solution of acetic acid at 25°C is 14.3 ohm−1 cm2 eq−1. Calculate the degree of dissociation of CH3COOH if Λ∞ CH3COOH is 390.71.

Solution. Λ∞ CH3COOH = 390.71 ohm−1 cm2 eq−1; Λv = 14.3 ohm−1 cm2 eq−1.
α = Λv/Λ∞ = 14.3/390.71 = 0.0366, i.e., 3.66% dissociated.

Teacher's Note: For weak electrolytes α = Λv/Λ∞.

Exam Note: Give α and also percent dissociation.

Example 29. A decinormal solution of NaCl has specific conductivity equal to 0.0092. If ionic conductances of Na+ and Cl− ions at the same temperature are 43.0 and 65.0 ohm−1 respectively, calculate the degree of dissociation of NaCl solution.

Solution. Equivalent conductance of N/10 NaCl solution Λv = sp. conductivity × dilution = 0.0092 × 10,000 = 92 ohm−1.
Λ∞ = λNa+ + λCl− = 43.0 + 65.0 = 108 ohm−1.
Degree of dissociation α = Λv/Λ∞ = 92/108 = 0.85.

Teacher's Note: N/10 means 10000 mL holds one equivalent: Λ = κ × 10000.

Exam Note: Dilution volume for N/10 is 10 L = 10,000 mL.

Example 30. At 18°C, the conductivities at infinite dilution of NH4Cl, NaOH and NaCl are 129.8, 217.4 and 108.9 mho respectively. If the equivalent conductivity of N/100 solution of NH4OH is 9.93 mho, calculate the degree of dissociation of NH4OH at this dilution.

Solution. Λ∞ NH4Cl = λNH4+ + λCl− = 129.8 ... (i); Λ∞ NaOH = λNa+ + λOH− = 217.4 ... (ii); Λ∞ NaCl = λNa+ + λCl− = 108.9 ... (iii).
(i) + (ii) − (iii): λNH4+ + λOH− = 129.8 + 217.4 − 108.9 = 238.3, so Λ∞ NH4OH = 238.3 mho.
Degree of dissociation α = Λv/Λ∞ = 9.93/238.3 = 0.04167, i.e. 4.17% dissociated.

Teacher's Note: Same Kohlrausch combination: NH4Cl + NaOH − NaCl.

Exam Note: Show the three-equation addition before dividing for α.

Illustrations of Objective Questions (Conductance)

Question 11. If the equivalent conductance of 1 M benzoic acid is 12.8 ohm−1 cm2 eq−1 and if the conductance of benzoate ion and H+ ions are 42 and 288.42 ohm−1 cm2 eq−1 respectively, its degree of dissociation is: (DPMT 2005) (a) 39% (b) 3.9% (c) 0.35% (d) 0.039%

Solution. Answer: (b) 3.9%. α = Λm/Λmo = 12.8/(42 + 288.42) = 0.0387. Percentage dissociation = 0.0387 × 100 ≈ 3.9%.

Teacher's Note: Λ∞ = λ(benzoate) + λ(H+); α = Λ/Λ∞.

Exam Note: Convert α = 0.0387 to a percentage for the option.

Question 12. Equivalent conductances of NaCl, HCl and CH3COONa at infinite dilution are 126.45, 426.16 and 91 ohm−1 cm2 eq−1 respectively. The equivalent conductance of CH3COOH at infinite dilution would be: (a) 101.38 ohm−1 cm2 eq−1 (b) 253.62 (c) 390.71 (d) 678.90

Solution. Answer: (c) 390.71 ohm−1 cm2 eq−1. ΛoCH3COOH = ΛoCH3COONa + ΛoHCl − ΛoNaCl = 91 + 426.16 − 126.45 = 390.71.

Teacher's Note: Kohlrausch: add salt and HCl, subtract NaCl.

Exam Note: Same combination as Example 27.

Question 13. The specific conductance of saturated solution of AgCl is found to be 1.86 × 10−6 ohm−1 cm−1 and that of water is 6 × 10−8 ohm−1 cm−1. The solubility of AgCl is ..... Given, ΛoAgCl = 137.2 ohm−1 cm2 eq−1. (a) 1.7 × 10−3 M (b) 1.3 × 10−5 M (c) 1.3 × 10−4 M (d) 1.3 × 10−6 M

Solution. Answer: (b) 1.3 × 10−5 M. κAgCl = κsolution − κH2O = 1.86 × 10−6 − 6 × 10−8 = 1.8 × 10−6 ohm−1 cm−1. ΛoAgCl = κ × 1000/S, so S = κ × 1000/Λo = 1.8 × 10−6 × 1000/137.2 = 1.31 × 10−5 M.

Teacher's Note: Subtract water's conductivity; saturated solution is dilute so Λ ≈ Λ∞.

Exam Note: Do not forget to subtract κ of water.

Question 14. The specific conductivity of N/10 KCl solution at 20°C is 0.0212 ohm−1 cm−1 and the resistance of the cell containing this solution at 20°C is 55 ohm. The cell constant is: (a) 4.616 cm−1 (b) 1.166 cm−1 (c) 2.173 cm−1 (d) 3.324 cm−1

Solution. Answer: (b) 1.166 cm−1. κ = C × l/a, so l/a = κ × (1/C) = κ × R = 0.0212 × 55 = 1.166 cm−1.

Teacher's Note: Cell constant = κ × R.

Exam Note: Multiply κ by resistance: 0.0212 × 55.

Question 15. The resistance of 1 N solution of CH3COOH is 250 ohm; when measured in a cell of cell constant 1.15 cm−1. The equivalent conductance will be: (AIEEE 2006) (a) 4.6 ohm−1 cm2 eq−1 (b) 9.2 (c) 18.4 (d) 0.023

Solution. Answer: (a) 4.6 ohm−1 cm2 eq−1. κ = C × l/a = (1/250) × 1.15 = 4.6 × 10−3 ohm−1 cm−1. Λe = κ × 1000/N = 4.6 × 10−3 × 1000/1 = 4.6 ohm−1 cm2 eq−1.

Teacher's Note: First κ from conductance and cell constant, then Λ = 1000κ/N.

Exam Note: Find κ first, then Λ = 1000κ/N.

Question 16. Resistance of a conductivity cell filled with a solution of an electrolyte of concentration 0.1 M is 100 ohm. The conductivity of this solution is 1.29 S m−1. Resistance of the same cell when filled with 0.2 M of the same solution is 520 ohm. The molar conductivity of 0.02 M solution of the electrolyte will be: (AIEEE 2006) (a) 124 × 10−4 S m2 mol−1 (b) 1240 × 10−4 (c) 1.24 × 10−4 (d) 12.4 × 10−4

Solution. Answer: (a) 124 × 10−4 S m2 mol−1. κ = (1/R)(l/A): 1.29 = (1/100) × (l/A), so l/A = 129 m−1. Λm = κ × 1000/M = (1/R)(l/A) × 1000/M = (1/520) × 129 × (1000/0.02) × 10−6 = 124 × 10−4 S m2 mol−1.

Teacher's Note: Cell constant from the first data; then use R = 520 with M = 0.02 as per key.

Exam Note: Follow the printed key: option (a).

Question 17. If the molar conductance values of Ca2+ and Cl− at infinite dilution are respectively 118.88 × 10−4 m2 mho mol−1 and 77.33 × 10−4 m2 mho mol−1 then that of CaCl2 is: (in m2 mho mol−1) (VITEEE 2007) (a) 118.8 × 10−4 (b) 154.66 × 10−4 (c) 273.54 × 10−4 (d) 196.21 × 10−4

Solution. Answer: (c) 273.54 × 10−4. Λmo CaCl2 = λo Ca2+ + 2λo Cl− = (118.88 × 10−4) + 2(77.33 × 10−4) = 273.54 × 10−4 m2 mho mol−1.

Teacher's Note: Molar Λ∞ counts each ion by its stoichiometric number.

Exam Note: Multiply the chloride value by 2.

Question 18. The molar conductivities of KCl, NaCl and KNO3 are 152, 128 and 111 S cm2 mol−1 respectively. What is the molar conductivity of NaNO3? (VITEEE 2008) (a) 101 S cm2 mol−1 (b) 87 S cm2 mol−1 (c) −101 S cm2 mol−1 (d) −391 S cm2 mol−1

Solution. Answer: (b) 87 S cm2 mol−1. ΛoNaNO3 = ΛoNaCl + ΛoKNO3 − ΛoKCl = 128 + 111 − 152 = 87 S cm2 mol−1.

Teacher's Note: Swap ions: NaCl + KNO3 − KCl leaves NaNO3.

Exam Note: Conductivity cannot be negative: rejects options (c), (d).

Section III: Electrochemical Cell - Solved Examples

Example 31. Construct the cells in which the following reactions are taking place. Which of the electrodes shall act as anode (negative electrode) and which one as cathode (positive electrode)? (a) Zn + CuSO4 = ZnSO4 + Cu (b) Cu + 2AgNO3 = Cu(NO3)2 + 2Ag (c) Zn + H2SO4 = ZnSO4 + H2 (d) Fe + SnCl2 = FeCl2 + Sn

Solution. The metal which goes into solution as its ions undergoes oxidation and acts as the negative electrode (anode); the element which comes into the free state undergoes reduction and acts as the positive electrode (cathode).
(a) Zn is oxidised to Zn2+ (anode, −) and Cu2+ is reduced to Cu (cathode, +): Zn | ZnSO4 || CuSO4 | Cu, or Zn | Zn2+ || Cu2+ | Cu.
(b) Cu is oxidised to Cu2+ and Ag+ is reduced to Ag: Cu | Cu(NO3)2 || AgNO3 | Ag, or Cu | Cu2+ || Ag+ | Ag (anode −, cathode +).
(c) Zn is oxidised to Zn2+ and H+ is reduced to H2: Zn | ZnSO4 || H2SO4 | H2(Pt), or Zn | Zn2+ || 2H+ | H2(Pt) (anode −, cathode +).
(d) Fe is oxidised to Fe2+ and Sn2+ is reduced to Sn: Fe | FeCl2 || SnCl2 | Sn, or Fe | Fe2+ || Sn2+ | Sn (anode −, cathode +).

Teacher's Note: Anode = species oxidised, written on the left; cathode on the right.

Exam Note: Write anode left, cathode right, salt bridge as ||.

Example 32. Consider the reaction 2Ag+ + Cd → 2Ag + Cd2+. The standard electrode potentials for Ag+ → Ag and Cd2+ couples are 0.80 volt and −0.40 volt respectively. (i) What is the standard potential E° for this reaction? (ii) For the electrochemical cell, in which this reaction takes place, which electrode is negative electrode?

Solution. (i) Half reactions: 2Ag+ + 2e− → 2Ag (reduction, cathode), E°Ag+/Ag = 0.80 V; Cd → Cd2+ + 2e− (oxidation, anode), E°Cd2+/Cd = −0.40 V (reduction potential), so E°Cd/Cd2+ = +0.40 V.
E° = E°Cd/Cd2+ + E°Ag+/Ag = 0.40 + 0.80 = 1.20 volt.
(ii) The negative electrode is always the electrode whose reduction potential has smaller value, or the electrode where oxidation occurs. Thus Cd electrode is the negative electrode.

Teacher's Note: E° = E°(cathode) − E°(anode); do not double E° for 2Ag+.

Exam Note: Potentials are intensive: never multiply E° by stoichiometric coefficients.

Example 33. Consider the cell Zn | Zn2+(aq.)(1.0 M) || Cu2+(aq.)(1.0 M) | Cu. The standard electrode potentials are: Cu2+ + 2e− → Cu(aq.), E° = 0.350 volt; Zn2+ + 2e− → Zn(aq.), E° = −0.763 volt. (i) Write down the cell reaction. (ii) Calculate the emf of the cell.

Solution. (i) Reduction potential of Zn is less than copper, hence Zn acts as anode and copper as cathode. At anode: Zn → Zn2+ + 2e− (oxidation); at cathode: Cu2+ + 2e− → Cu (reduction). Cell reaction: Zn + Cu2+ → Zn2+ + Cu.
(ii) E°cell = E°Zn/Zn2+ + E°Cu2+/Cu = oxidation potential of zinc + reduction potential of copper = 0.763 + 0.350 = 1.113 volt.

Teacher's Note: Lower reduction potential means anode; add oxidation and reduction potentials.

Exam Note: Flip the sign of E° for the anode.

Example 34. Write the electrode reactions and the net cell reactions for the following cells. Which electrode would be the positive terminal in each cell? (a) Zn | Zn2+ || Br−, Br2 | Pt (b) Cr | Cr3+ || I−, I2 | Pt (c) Pt | H2, H+ || Cu2+ | Cu (d) Cd | Cd2+ || Cl−, AgCl | Ag

Solution. (a) Oxidation: Zn → Zn2+ + 2e−; reduction: Br2 + 2e− → 2Br−; net: Zn + Br2 → Zn2+ + 2Br−. Positive terminal: cathode Pt.
(b) Oxidation: [Cr → Cr3+ + 3e−] × 2; reduction: [I2 + 2e− → 2I−] × 3; net: 2Cr + 3I2 → 2Cr3+ + 6I−. Positive terminal: cathode Pt.
(c) Oxidation: H2 → 2H+ + 2e−; reduction: Cu2+ + 2e− → Cu; net: H2 + Cu2+ → Cu + 2H+. Positive terminal: cathode Cu.
(d) Oxidation: Cd → Cd2+ + 2e−; reduction: [AgCl + e− → Ag + Cl−] × 2; net: Cd + 2AgCl → Cd2+ + 2Ag + 2Cl−. Positive terminal: cathode Ag.

Teacher's Note: Right-hand electrode is the cathode and is the positive terminal.

Exam Note: Multiply half-reactions to equalise electrons before adding.

Example 35. Will Fe be oxidised to Fe2+ by reaction with 1.0 M HCl? E° for Fe/Fe2+ = +0.44 volt.

Solution. The reaction will occur if Fe is oxidised to Fe2+: Fe + 2HCl → FeCl2 + H2.
Half reactions: Fe → Fe2+ + 2e−, oxidation, E°Fe/Fe2+ = 0.44 volt; 2H+ + 2e− → H2, reduction, E°H+/H = 0.0 volt. Adding, emf = 0.44 volt.
Since emf is positive, the reaction shall occur.

Teacher's Note: Positive total E° means the reaction is spontaneous.

Exam Note: Add oxidation and reduction potentials; sign decides.

Example 36. The values of E° of some of the reactions are given below: I2 + 2e− → 2I−, E° = +0.54 volt; Cl2 + 2e− → 2Cl−, E° = +1.36 volt; Fe3+ + e− → Fe2+, E° = +0.76 volt; Ce4+ + e− → Ce3+, E° = +1.60 volt; Sn4+ + 2e− → Sn2+, E° = +0.15 volt. On the basis of the above data, answer the following questions: (a) Whether Fe3+ oxidises Ce3+ or not? (b) Whether I2 displaces chlorine from KCl? (c) Whether the reaction between FeCl3 and SnCl2 occurs or not?

Solution. (a) Fe3+ + Ce3+ → Ce4+ + Fe2+. Reduction: Fe3+ + e− → Fe2+, E° = 0.76 V; oxidation: Ce3+ → Ce4+ + e−, E°ox = −1.60 V. Adding, emf = −0.84 V. Since emf is negative, the reaction does not occur, i.e. Fe3+ does not oxidise Ce3+.
(b) I2 + 2KCl → 2KI + Cl2. Reduction: I2 + 2e− → 2I−, E° = 0.54 V; oxidation: 2Cl− → Cl2 + 2e−, E°ox = −1.36 V. Adding, emf = −0.82 V. Negative, so I2 does not displace Cl2 from KCl.
(c) SnCl2 + 2FeCl3 → SnCl4 + 2FeCl2. Reduction: Fe3+ + e− → Fe2+, E° = 0.76 V; oxidation: Sn2+ → Sn4+ + 2e−, E°ox = −0.15 V. Adding, emf = +0.61 V. Since emf is positive, the reaction will occur.

Teacher's Note: Spontaneity: E°(oxidant) must exceed E°(reductant) for the pair.

Exam Note: State sign of total emf, then the conclusion.

Example 37. Calculate the electrode potential at a copper electrode dipped in a 0.1 M solution of copper sulphate at 25°C. The standard electrode potential of Cu2+/Cu system is 0.34 volt at 298 K.

Solution. Ered = E°red + (0.0591/n) log10[ion]. With E°red = 0.34 V, n = 2 and [Cu2+] = 0.1 M:
Ered = 0.34 + (0.0591/2) log10[0.1] = 0.34 + 0.02955 × (−1) = 0.34 − 0.02955 = 0.31045 volt.

Teacher's Note: Dilute Cu2+ lowers the reduction potential (Nernst).

Exam Note: Use +0.0591/n log[Mn+] for a reduction potential.

Example 38. What is the single electrode potential of a half-cell for zinc electrode dipping in 0.01 M ZnSO4 solution at 25°C? The standard electrode potential of Zn/Zn2+ system is 0.763 volt at 25°C.

Solution. Eox = E°ox − (0.0591/n) log10[ion]. Putting E°ox = 0.763 V, n = 2 and [Zn2+] = 0.01 M:
Eox = 0.763 − (0.0591/2) log10[0.01] = 0.763 − 0.02955 × (−2) = 0.763 + 0.0591 = 0.8221 volt.

Teacher's Note: Oxidation potential rises when [Zn2+] falls.

Exam Note: Sign is minus before the log for oxidation potential.

Example 39. The standard oxidation potential of zinc is 0.76 volt and of silver is −0.80 volt. Calculate the emf of the cell: Zn | Zn(NO3)2 (0.25 M) || AgNO3 (0.1 M) | Ag at 25°C.

Solution. Cell reaction: Zn + 2Ag+ → 2Ag + Zn2+. E°cell = E°ox of Zn + E°red of Ag = 0.76 + 0.80 = 1.56 volt.
Ecell = E°cell − (0.0591/n) log [Products]/[Reactants] = 1.56 − (0.0591/2) log (0.25/(0.1 × 0.1)) = 1.56 − (0.0591/2) × 1.3979 = 1.56 − 0.0413 = 1.5187 volt.
Alternative method: Eox(Zn) = 0.76 − (0.0591/2) log 0.25 = 0.76 + 0.0177 = 0.7777 V; Ered(Ag) = 0.80 + 0.0591 log 0.1 = 0.80 − 0.0591 = 0.7409 V; Ecell = 0.7777 + 0.7409 = 1.5186 V ≈ 1.5187 V.

Teacher's Note: Nernst: n = 2, Q = [Zn2+]/[Ag+]2 = 25.

Exam Note: Square [Ag+] in Q because of coefficient 2.

Example 40. The emf (E°) of the following cells are: Ag | Ag+(1 M) || Cu2+(1 M) | Cu, E° = −0.46 volt; Zn | Zn2+(1 M) || Cu2+(1 M) | Cu, E° = +1.10 volt. Calculate the emf of the cell: Zn | Zn2+(1 M) || Ag+(1 M) | Ag

Solution. Required: Ecell = Eox (Zn/Zn2+) + Ered (Ag+/Ag).
From the first cell, reversed: Cu | Cu2+(1 M) || Ag+(1 M) | Ag has E° = +0.46 V = Eox (Cu/Cu2+) + Ered (Ag+/Ag) ... (i)
From the second cell: +1.10 = Eox (Zn/Zn2+) + Ered (Cu2+/Cu) ... (ii)
Adding (i) and (ii): +1.56 = Eox (Cu/Cu2+) + Ered (Ag+/Ag) + Eox (Zn/Zn2+) + Ered (Cu2+/Cu). Since Eox (Cu/Cu2+) = −Ered (Cu2+/Cu), +1.56 = Eox (Zn/Zn2+) + Ered (Ag+/Ag).
Thus Zn | Zn2+(1 M) || Ag+(1 M) | Ag is +1.56 volt.

Teacher's Note: Combine cells so the common Cu couple cancels.

Exam Note: Reverse a cell and its E° changes sign before adding.

Example 41. Calculate the emf of the cell. Mg(s) | Mg2+(0.2 M) || Ag+(1 × 10−3 M) | Ag. E°Ag+/Ag = +0.8 volt, E°Mg2+/Mg = −2.37 volt. What will be the effect on emf if concentration of Mg2+ ion is decreased to 0.1 M?

Solution. E°cell = E°cathode − E°anode = 0.80 − (−2.37) = 3.17 volt.
Cell reaction: Mg + 2Ag+ → 2Ag + Mg2+.
Ecell = E°cell − (0.0591/2) log [Mg2+]/[Ag+]2 = 3.17 − (0.0591/2) log (0.2/(1 × 10−3)2) = 3.17 − 0.1566 = 3.0134 volt.
When [Mg2+] = 0.1 M: Ecell = 3.17 − (0.0591/2) log (0.1/(1 × 10−3)2) = 3.17 − 0.1477 = 3.0223 volt.
The emf increases slightly (from 3.0134 V to 3.0223 V).

Teacher's Note: Lower product concentration raises emf slightly (Le Chatelier).

Exam Note: Quote both emf values and the direction of change.

Example 42. To find the standard potential of M3+/M electrode, the following cell is constituted: Pt | M | M3+(0.0018 mol L−1) || Ag+(0.01 mol L−1) | Ag. The emf of this cell is found to be 0.42 volt. Calculate the standard potential of the half reaction M3+ + 3e− → M. E°Ag+/Ag = 0.80 volt.

Solution. Cell reaction: M + 3Ag+ → 3Ag + M3+.
Ecell = E°cell − (0.0591/3) log [M3+]/[Ag+]3: 0.42 = E°cell − (0.0591/3) log (0.0018/(0.01)3) = E°cell − 0.064.
E°cell = 0.42 + 0.064 = 0.484 volt. E°cell = E°cathode − E°anode, so E°anode = E°cathode − E°cell = 0.80 − 0.484 = 0.32 volt.

Teacher's Note: Use n = 3 and Q = [M3+]/[Ag+]3; then E°(anode) = E°(cathode) − E°cell.

Exam Note: n = 3, not 1; cathode is Ag.

Illustrations of Objective Questions (Electrochemical Cell)

Question 19. The oxidation potential of hydrogen electrode at pH = 10 and pH2 = 1 atm is: (a) 0.51 V (b) 0.00 V (c) +0.59 V (d) 0.059 V

Solution. Answer: (c) +0.59 V. Eox = E°ox − (0.0591/n) log ([H+]/pH2) = 0 − (0.0591/1) log (10−10/1) = 0.59 V.

Teacher's Note: Oxidation potential of H2 rises as [H+] falls (pH rises).

Exam Note: Convert pH 10 to [H+] = 10−10 M.

Question 20. The value of equilibrium constant for a feasible cell reaction is: (a) < 1 (b) = 1 (c) > 1 (d) zero

Solution. Answer: (c) > 1. K = antilog(nE°/0.0591). For a feasible cell, E° is positive; hence from the above equation K > 1 for a feasible cell reaction.

Teacher's Note: Positive E° means ΔG° negative and K greater than 1.

Exam Note: Link E° > 0 to K > 1 in one line.

Question 21. E° for the electrochemical cell Zn(s) | Zn2+ 1 M (aq.) || Cu2+ 1 M (aq.) | Cu(s) is 1.10 V at 25°C. The equilibrium constant for the cell reaction Zn(s) + Cu2+(aq.) ⇌ Zn2+(aq.) + Cu(s) will be: (a) 10−37 (b) 1037 (c) 10−39 (d) 1039

Solution. Answer: (b) 1037. K = antilog(nE°/0.0591) = antilog(2 × 1.10/0.0591) = 1.67 × 1037.

Teacher's Note: Use n = 2: log K = nE°/0.0591 = 37.2.

Exam Note: Positive E° must give K > 1: rules out options (a), (c).

Question 22. The value of the reaction quotient Q, for the cell Zn(s) | Zn2+(0.01 M) || Ag+(1.25 M) | Ag(s) is: (a) 156 (b) 125 (c) 1.25 × 10−2 (d) 6.4 × 10−3

Solution. Answer: (d) 6.4 × 10−3. Anode: Zn(s) → Zn2+ + 2e−; cathode: 2Ag+ + 2e− → 2Ag(s). Zn(s) + 2Ag+ ⇌ 2Ag(s) + Zn2+. Q = [Zn2+]/[Ag+]2 = 0.01/(1.25)2 = 6.4 × 10−3.

Teacher's Note: Q uses products over reactants; [Ag+] is squared.

Exam Note: Do not forget the square on [Ag+].

Question 23. Calculate the emf of the following concentration cell at 25°C: Ag(s) | AgNO3 (0.01 M) || AgNO3 (0.05 M) | Ag(s) (a) −0.414 V (b) 0.828 V (c) 0.414 V (d) 0.0414 V

Solution. Answer: (d) 0.0414 V. E = E° − (0.0591/n) log10 Q; E° = 0 for all concentration cells. E = 0 − (0.0591/1) log10(0.01/0.05) = 0.0414 V.

Teacher's Note: Concentration cell has E° = 0; emf comes only from the Nernst term.

Exam Note: Set E° = 0 and Q = dilute/concentrated.

Question 24. The equilibrium constant of the reaction: Cu(s) + 2Ag+(aq.) ⇌ Cu2+(aq.) + 2Ag(s), E° = 0.46 V at 298 K is: [CBSE (Med.) 2007] (a) 2.0 × 1010 (b) 4.0 × 1010 (c) 4.0 × 1015 (d) 2.4 × 1010

Solution. Answer: (c) 4.0 × 1015. K = antilog(nE°/0.059) = antilog(2 × 0.46/0.059) = antilog 15.593 = 3.9 × 1015 ≈ 4 × 1015.

Teacher's Note: n = 2 electrons; log K = 15.6.

Exam Note: Round 3.9 × 1015 to the matching option.

Question 25. The cell reaction of a cell is: Mg(s) + Cu2+(aq.) → Cu(s) + Mg2+(aq.). If the standard reduction potentials of Mg and Cu are −2.37 and +0.34 respectively. The emf of the cell is: [JEE (WB) 2007] (a) 2.03 V (b) −2.03 V (c) +2.71 V (d) −2.71 V

Solution. Answer: (c) +2.71 V. E°cell = E°cathode − E°anode = E°reduced species − E°oxidised species = 0.34 − (−2.37) = +2.71 V.

Teacher's Note: Subtract anode (Mg) reduction potential from cathode (Cu).

Exam Note: Subtracting a negative gives addition: 2.71 V.

Question 26. The equilibrium constant of the following redox reaction at 298 K is 1 × 108: 2Fe3+(aq.) + 2I−(aq.) ⇌ 2Fe2+(aq.) + I2(s). If the standard reduction potential of iodine becoming iodide is + 0.54 V. What is the standard reduction potential of Fe3+/Fe2+? [PMT (Kerala) 2008] (a) +1.006 V (b) −1.006 V (c) +0.77 V (d) −0.77 V (e) −0.652 V

Solution. Answer: (c) +0.77 V. E° = (0.059/n) log10K = (0.059/2) log10108 = 0.236 V. E°cell = E°reduced species − E°oxidised species: 0.236 = E°Fe3+/Fe2+ − 0.54, so E°Fe3+/Fe2+ = 0.776 ≈ 0.77 V.

Teacher's Note: E°cell from K, then add the iodine couple (0.54 V).

Exam Note: n = 2 for the balanced equation; log 108 = 8.

Step-by-Step OP Tandon Solutions for JEE Math

Complete Math Solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 12 Electrochemistry Part 1

Access the complete chapter-wise PDF for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 12 Electrochemistry Part 1. These structured OP Tandon Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Detailed Calculation Guides for JEE

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Complete Your JEE Exam Preparation

In addition to these OP Tandon Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.