P Bahadur Solutions Numerical Chemistry Chapter 13 Ionic Equilibrium Part 2

Official P Bahadur Textbook Solutions: JEE Chemistry Chapter 13 Ionic Equilibrium

Review structured textbook solutions for JEE Chemistry Chapter 13 Ionic Equilibrium prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Chemistry: Chapter 13 Ionic Equilibrium

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Ionic Equilibrium - Numerical Problems 119 onwards (Part 2)

Numerical Problems on Solubility, Indicators and Salt Hydrolysis

Question 119. (Question statement is not printed in the source book; solution given below.)

Solution. Initial [Sr2+] = 16×10-3 M; left in solution = 2.5×10-3 M.
[Sr2+] precipitated = (16 − 2.5)×10-3 = 13.5×10-3 M.
Sr2+ + 2F- → SrF2, so [F-] needed for this precipitation = 2×13.5×10-3 = 27.0×10-3 M.
Also [Sr2+][F-]2 = Ksp = 2.8×10-9, so [F-]2 = 2.8×10-9/2.5×10-3, giving [F-] = 1.058×10-3 M (the F- that stays in solution).
Thus [F-] needed = (27.0 + 1.058)×10-3 = 28.058×10-3 M.
NaF needed for 1 litre = 28.058×10-3×42 g, so for 100 mL = 28.058×10-3×42/10 g = 0.1178 g.

Teacher's Note: Add F- both for the precipitated part and for the F- that must remain at Ksp equilibrium.

Exam Note: Include the leftover F- term; forgetting it loses the last mark.

Question 120. (Question statement is not printed in the source book; solution given below.)

Solution. MBr2(g) ⇌ M2+ + 2Br-; MBr2 + H2S → MS + 2HBr.
Ksp of MS = [M2+][S2-]: 6×10-21 = [0.05][S2-], so [S2-] = 1.2×10-19 M.
MS will be precipitated if H2S provides 1.2×10-19 M of S2- ions.
For H2S ⇌ 2H+ + S2-: K1×K2 = [H+]2[S2-]/[H2S]
10-7×1.3×10-13 = [H+]2(1.2×10-19)/[0.1]
[H+] = 1.04×10-1 M, so pH = 0.9826.

Teacher's Note: Find [S2-] from Ksp, then convert it to [H+] using K1K2 of H2S.

Exam Note: Use the combined K1K2 expression for H2S.

Question 121. (Question statement is not printed in the source book; solution given below.)

Solution. Dissociation of the complexes (NaCN is 0.2 M, so [CN-] = 0.2 M):
Ag(CN)2- ⇌ Ag+ + 2CN-; K = [Ag+][CN-]2/[Ag(CN)2-] = [Ag+](0.2)2/0.02 = 1.0×10-20, so [Ag+] = 5×10-21 M.
Cd(CN)42- ⇌ Cd2+ + 4CN-; K = [Cd2+][CN-]4/[Cd(CN)42-]
7.8×10-18 = [Cd2+](0.2)4/0.02, so [Cd2+] = 9.75×10-17 M.
[S2-] needed to precipitate Ag2S = Ksp/[Ag+]2 = 1.0×10-50/(5×10-21)2 = 4×10-10 M.
[S2-] needed to precipitate CdS = 7.1×10-28/9.75×10-17 = 7.28×10-12 M.
Therefore CdS will be precipitated first (it needs the smaller [S2-]).

Teacher's Note: The complex ion gives free metal ion; the salt needing less S2- precipitates first.

Exam Note: Compare the S2- needed for each sulphide, not the Ksp values.

Question 122. (Question statement is not printed in the source book; solution given below.)

Solution. For indicator dissociation, HIn ⇌ H+ + In- (colour A for HIn, colour B for In-): KIn = [H+][In-]/[HIn].
The midpoint of the colour range of an indicator HIn is the point at which [In-] = [HIn]. So KIn = [H+] = 1×10-5, i.e. pH = 5. Thus, at pH = 5 of the solution, the indicator will change its colour.
Again KIn = [H+][In-]/[HIn]: 1×10-5 = [H+]×80×100/(100×20), so [H+] = 0.25×10-5 and pH = 5.6020.

Teacher's Note: At midpoint [In-] = [HIn], so pH = pKIn; otherwise use the ratio.

Exam Note: State pH = pKIn at the colour-change midpoint.

Question 123. (Question statement is not printed in the source book; solution given below.)

Solution. The two conditions when the colour of the indicator will be visible are derived by pH = pKa + log[In-]/[HIn]:
(i) pH = 5 + log 10 = 6
(ii) pH = 5 + log 0.1 = 4
Thus the minimum change in pH = 2.

Teacher's Note: Colour is seen when one form is ten times the other, giving pKa ± 1.

Exam Note: Indicator range is pKa ± 1: two units.

Question 124. (Question statement is not printed in the source book; solution given below.)

Solution. HBPh ⇌ H+ + BPh-; Ka = [H+][BPh-]/[HBPh]. When [BPh-] = [HBPh] the indicator will work, so [H+] = 5.84×10-5, i.e. pH = 4.2336.
Also if pH = 4.84, [H+] = 1.44×10-5; then Ka = [H+][BPh-]/[HBPh], i.e. 5.84×10-5 = 1.44×10-5·Cα/C(1 − α), giving α = 0.8, i.e. 80%.

Teacher's Note: Use Ka = [H+] at the midpoint, then find the ionised fraction at the new pH.

Exam Note: Write Ka as the ratio of ionised to unionised form.

Question 125. (Question statement is not printed in the source book; solution given below.)

Solution. NaOCN + H2O ⇌ NaOH + HCN
h = √(KH/C) = √(Kw/(KaC)) = √(10-14/(3.33×10-4×0.003)) = 10-4
So % hydrolysis = 10-4×100 = 10-2.

Teacher's Note: Salt of strong base and weak acid: h = sqrt(Kw/(Ka C)).

Exam Note: Convert h to percent at the end.

Question 126. (Question statement is not printed in the source book; solution given below.)

Solution. pKb of the anion for HCN: pKa for HCN = 14 − 4.70 = 9.30.
NaCN + H2O ⇌ NaOH + HCN (1 mol: 1 − h, h, h)
[OH-] = C·h = C√(KH/C) = √(KH·C) = √(Kw·C/Ka)
or pOH = ½[pKw − log C − pKa] = ½[14 + 0.3010 − 9.30] = 2.5
So pH = 14 − 2.5 = 11.5.

Teacher's Note: The conjugate base of a weak acid hydrolyses; use pOH = half of pKw - log C - pKa.

Exam Note: Convert pOH to pH by subtracting from 14.

Question 127. (Question statement is not printed in the source book; solution given below.)

Solution. NH4Cl + H2O ⇌ NH4OH + HCl (before: 1, 0, 0; after: 1 − h, h, h), where h is the degree of hydrolysis.
h = √(KH/C) = √(Kw/(Kb·C)) = √(10-14/(1.8×10-5×0.2)) = 5.27×10-5
From HCl, a strong acid: [H+] = C·h = C√(KH/C) = √(KH·C) = √(Kw·C/Kb) = √(10-14×0.2/(1.8×10-5)) = 1.054×10-5
pH = −log[H+] = −log 1.054×10-5 = 4.9771.

Teacher's Note: Salt of strong acid and weak base gives acidic solution; [H+] = sqrt(Kw C/Kb).

Exam Note: Report both h and pH if asked.

Question 128. (Question statement is not printed in the source book; solution given below.)

Solution. Let the concentration of NH4Cl be C mol L-1. NH4Cl + H2O ⇌ NH4OH + HCl.
[H+] = √(KH·C) = √(Kw·C/Kb) = √(10-14×C/(1.8×10-5)); with [H+] = 10-4.5, C = 1.8 mol litre-1.
Mass of NH4Cl = 1.8×53.5 g/litre = 1.8×53.5×½ g/500 mL = 48.15 g.

Teacher's Note: Back-calculate C from the given pH, then convert to mass for 500 mL.

Exam Note: Halve the per-litre mass for 500 mL.

Question 129. (Question statement is not printed in the source book; solution given below.)

Solution. (a) NaBu + H2O ⇌ NaOH + BuH (before: 1, 0, 0; after: 1 − h, h, h)
[OH-] = C·h = C√(KH/C) = √(KH·C) = √(Kw·C/Ka) = √(10-14×0.2/(2×10-5)) = √(10-10) = 10-5
pOH = 5; pH + pOH = 14, so pH = 14 − 5 = 9.
(b) [Ans: 8]

Teacher's Note: Salt of weak acid and strong base: basic, so find pOH first.

Exam Note: Always finish by converting pOH to pH.

Question 130. (Question statement is not printed in the source book; solution given below.)

Solution. Asc- + H2O ⇌ HAsc + OH-
[OH-] = C·h = C√(KH/C) = √(KH·C) = √(Kw·C/Ka) = √(10-14×0.02/(5×10-5)) = 2×10-6
[H+] = 1×10-14/(2×10-6) = 5×10-9
Also h = √(KH/C) = √(Kw/(Ka×C)) = √(10-14/(5×10-5×0.02)) = 10-4 or 0.01%.

Teacher's Note: Hydrolysis of a weak-acid anion; get [OH-], then [H+] from Kw.

Exam Note: Give [H+] and h both with units or percent.

Question 131. (Question statement is not printed in the source book; solution given below.)

Solution. Let V mL of acid and V mL of NaOH be used. Concentration of both acid and NaOH is the same (0.1 M).
CH3COOH + NaOH → CH3COONa + H2O
Conc. before reaction: 0.1×V/2V each; after reaction: 0, 0, 0.1×V/2V, 0.1×V/2V.
[CH3COONa] = 0.1/2 = 0.05 M.
Now calculate pH by hydrolysis of CH3COONa: [OH-] = C·h = √(KH·C) = √(Kw×C/Ka) = √(10-14×0.05/(1.9×10-5)) = 5.12×10-6 M
pOH = 5.29, so pH = 8.71.

Teacher's Note: Equal volumes of equal-strength acid and base halve the salt concentration.

Exam Note: Neutralisation point of a weak acid is above pH 7.

Question 132. (Question statement is not printed in the source book; solution given below.)

Solution. [Ans: 8.975]

Teacher's Note: Answer-only entry in the book; the working is not printed.

Exam Note: Quote the printed answer as given.

Question 133. (Question statement is not printed in the source book; solution given below.)

Solution. Ca(LaC)2 + 2H2O ⇌ Ca(OH)2 + 2HLaC, or 2LaC- + 2H2O ⇌ 2OH- + 2HLaC (before hydrolysis: 1, 0, 0; after: 1 − h, h, h).
[Ca(LaC)2] = 0.13/0.5 = 0.26 M.
[LaC-] = 0.26×2 = 0.52 M (since 1 mole Ca(LaC)2 gives 2 moles LaC-).
[OH-] = C·h = √(KH·C) = √(Kw×C/Ka), where C is the concentration of the anion which undergoes hydrolysis.
10-5.60 = √(10-14×0.52/Ka), so Ka = 8.25×10-4.

Teacher's Note: Use the anion concentration (2 x salt), not the salt concentration, in the hydrolysis formula.

Exam Note: Count both lactate ions furnished per formula unit.

Question 134. (Question statement is not printed in the source book; solution given below.)

Solution. K3PO4 + H2O ⇌ K2HPO4 + KOH, or PO43- + H2O ⇌ HPO42- + OH-. Since hydrolysis proceeds only in one step, [OH-] = C·h = √(Kw·C/Ka), where Ka is the III dissociation constant of H3PO4 (H3PO4 ⇌ H+ + H2PO4-, K1; H2PO4- ⇌ H+ + HPO42-, K2; HPO42- ⇌ H+ + PO43-, K3 = Ka = 1.3×10-12).
[OH-] = √(10-14×0.1/(1.3×10-12)) = 0.0277 M.
Corrected: pOH = 1.5569, so pH = 12.4431. (The book prints pOH = 1.5634 and pH = 12.4366, which does not follow from the same numbers.)

Teacher's Note: Only the first hydrolysis step matters; use K3 of phosphoric acid.

Exam Note: Name which Ka is used (the third).

Question 135. (Question statement is not printed in the source book; solution given below.)

Solution. Fe3+ + H2O ⇌ Fe(OH)2+ + H+; KH = 6.5×10-3 (1 − h, h, h).
[H+] = Ch and KH = C·h2/(1 − h), with h = 5/100.
6.5×10-3 = C×5×5×100/(100×100×95), so C = 2.47 M.
[H+] = 2.47×5/100, so pH = 0.9083.

Teacher's Note: Degree of hydrolysis is large here, so keep the (1 - h) term.

Exam Note: Do not approximate 1 - h = 1 for h = 5%.

Question 136. (Question statement is not printed in the source book; solution given below.)

Solution. Zn2+ + H2O ⇌ [Zn(OH)]+ + H+; KH = 1.0×10-9.
[H+] = C·h = C√(KH/C) = √(KH·C) = √(10-9×0.001) = 10-6, so pH = 6.

Teacher's Note: Cation hydrolysis: [H+] = sqrt(KH x C).

Exam Note: Show the square root step.

Question 137. (Question statement is not printed in the source book; solution given below.)

Solution. Aniline+ + Acetate- + H2O ⇌ Aniline + Acetic acid (before hydrolysis: 1, 1, 0, 0; after: 1 − h, 1 − h, h, h). Let the concentration of salt be C mol litre-1.
KH = [Aniline][Acetic acid]/([Aniline+][Acetate-]) = C·h·C·h/(C(1 − h)·C(1 − h)) = h2/(1 − h)2, so h/(1 − h) = √KH.
h/(1 − h) = √(Kw/(Ka·Kb)) = √(1.008×10-14/(1.75×10-5×3.83×10-10)) = 1.226
Corrected: h = 1.226/2.226 = 0.5508, i.e. 55.1%. (The book prints 54.95%.)
Note (from the book): if KH = h2 is used assuming 1 − h ≈ 1, the value of h comes greater than 1, which is not possible; thus it is always advised in all such cases not to assume 1 − h = 1 when h values are higher. Also the term dissociation constant of water is used here for the ionic product of water.

Teacher's Note: For a weak-acid/weak-base salt, h is independent of C and 1 - h cannot be dropped.

Exam Note: Keep h/(1-h); the approximation gives h above 1.

Question 138. (Question statement is not printed in the source book; solution given below.)

Solution. The pH of the salt HCOONH4 (a salt of weak acid + weak base) is given by: HCOONH4 + H2O ⇌ HCOOH + NH4OH
pH = ½[log Kb − log Ka − log Kw] = ½[pKa + pKw − pKb]
= ½[3.8 + 14 − 4.8] = 6.5.

Teacher's Note: Weak acid plus weak base salt: pH = half of (pKa + pKw - pKb).

Exam Note: Quote the formula; the result is independent of concentration.

Question 139. (Question statement is not printed in the source book; solution given below.)

Solution. Work in millimoles in the total 100 mL (NaOH/acid/base solutions of 50 mL each).
(a) NaOH + CH3COOH → CH3COONa + H2O: mmol before 50×0.1 = 5 and 50×0.05 = 2.5; after: 2.5 NaOH left, 0 acid, 2.5 salt. A strong alkali is left free and thus will decide pH. [NaOH] = 2.5/100 = 2.5×10-2 M, so [OH-] = 2.5×10-2 M, pOH = 1.6021 and pH = 12.3979.
(b) NaOH + CH3COOH: before 50×0.05 = 2.5 and 50×0.1 = 5; after: 0 NaOH, 2.5 acid, 2.5 salt. The solution consists of CH3COOH and CH3COONa and thus is a buffer: pH = −log Ka + log [CH3COONa]/[CH3COOH] = −log 1.8×10-5 + log (2.5/100)/(2.5/100), so pH = 4.7447.
(c) NaOH + CH3COOH: before 50×0.1 = 5 each; after: 0, 0, 5 salt. CH3COONa is left with concentration 5/100 M and thus pH is decided by salt hydrolysis: [OH-] = C·h = √(Kw×C/Ka) = √(10-14/(1.8×10-5)×5/100) = 5.27×10-6 M, so pH = 8.7218.
(d) NH4OH + HCl → NH4Cl + H2O: before 50×0.1 = 5 and 50×0.05 = 2.5; after: 2.5 NH4OH left, 0 HCl, 2.5 salt. The solution contains NH4OH and NH4Cl and acts as a buffer: pOH = −log Kb + log [NH4Cl]/[NH4OH] = −log 1.8×10-5 + log (2.5/100)/(2.5/100) = 4.7447, so pH = 9.2553.
(e) NH4OH + HCl: before 50×0.05 = 2.5 and 50×0.1 = 5; after: 0 base, 2.5 HCl, 2.5 salt. Strong acid is left and therefore pH is decided by HCl: [HCl] = [H+] = 2.5/100 M, so pH = 1.6021.
(f) NH4OH + HCl: before 50×0.1 = 5 each; after: 0, 0, 5 salt. Salt is left and pH will be decided by salt hydrolysis: [NH4Cl] = 5/100 = 5×10-2 M. Since NH4Cl is a salt of strong acid and weak base, pH = ½[pKw − pKb − log C] = ½[14 − 4.7447 + 1.3010], so pH = 5.2782.
(g) NH4OH + CH3COOH → CH3COONH4 + H2O: before 50×0.05 = 2.5 each; after: 0, 0, 2.5 salt. Salt is left and pH will be decided by salt hydrolysis: [CH3COONH4] = 2.5/100 = 2.5×10-2 M. For CH3COONH4 + H2O ⇌ CH3COOH + NH4OH: [H+] = hKa = √(KwKa/Kb), so pH = ½[pKw + pKa − pKb] = ½[14 + 4.7447 − 4.7447] = 7.

Teacher's Note: Classify each mixture: excess strong, buffer, or pure salt, then pick the right formula.

Exam Note: Show the millimole table; method marks come from it.

Question 140. (Question statement is not printed in the source book; solution given below.)

Solution. By Raoult's law: (P° − Ps)/Ps = w×M/(m×W), so w/(m×W) = (17.540 − 17.536)/(17.536×18) = 1.267×10-5.
Molality = w/(m×W)×1000 = 1.267×10-5×103 = 1.267×10-2 = Molarity = conc. of [BOH].
For BOH ⇌ B+ + OH- (1, 0, 0 → 1 − α, α, α): experimental value of molarity / normal value of molarity = 1 + α, so 1.267×10-2/(1×10-2) = 1 + α, giving α = 0.267.
Kb = Cα2/(1 − α) = 0.01×0.267×0.267/(1 − 0.267) = 9.74×10-4.

Teacher's Note: Lowering of vapour pressure gives total particles; the excess over normal is alpha.

Exam Note: State van t Hoff factor i = 1 + alpha.

Question 141. (Question statement is not printed in the source book; solution given below.)

Solution. HA ⇌ H+ + A- (1, 0, 0 → 1 − α, α, α).
πV = nST(1 + α), or 1 + α = πV/(n×S×T) = 0.293/(0.01×0.0821×298) (n/V = 0.01), so 1 + α = 1.197 and α = 0.197.
Ka for HA = Cα2/(1 − α) = 0.01×(0.197)2/(1 − 0.197) = 4.83×10-4.
Similarly, Ka for HB = 2.85×10-3.

Teacher's Note: Osmotic pressure with van t Hoff factor 1 + alpha gives alpha, then Ka.

Exam Note: Use T in kelvin.

Question 142. (Question statement is not printed in the source book; solution given below.)

Solution. (i) Zn(OH)2(s) ⇌ Zn2+ + 2OH-; Ksp = [Zn2+][OH-]2
(ii) Zn(OH)2(s) + 2OH- ⇌ [Zn(OH)4]2-; Kf = [Zn(OH)4]2-/[OH-]2
Let the solubility be s in change (i); it will also be s in change (ii). By coupling (i) and (ii): 2Zn(OH)2(s) ⇌ Zn2+(aq) + [Zn(OH)4]2-(aq), and thus Ksp×Kf = s×s, or s = √(Ksp×Kf) = √(1.2×10-17×0.12) = 1.2×10-9 M.
Thus total solubility will be 2s = 2.4×10-9 M.
This solubility is minimum when [Zn2+][OH-]2 = 1.2×10-17, i.e. 1.2×10-9[OH-]2 = 1.2×10-17, so [OH-] = 10-4 M.
Note (from the book): if only (i) changes, solubility of Zn(OH)2 = ∛(Ksp/4) = ∛(1.2×10-17/4) = 1.44×10-6 M, and at this concentration [OH-] = 2×1.44×10-6 M = 2.88×10-6 M.

Teacher's Note: Amphoteric hydroxide dissolves as Zn2+ and zincate; the two solubilities are equal at the minimum.

Exam Note: Add both dissolved zinc species to get total solubility.

Question 143. (Question statement is not printed in the source book; solution given below.)

Solution. (a) N2O4 ⇌ 2NO2. Let a mole of N2O4 and b mole of NO2 be present in the equilibrium mixture.
(a + b) = PV/RT = 753×0.5/(760×0.0821×298) = 0.020 ...(1)
Kp = (nNO2)2/(nN2O4) × [P/(nNO2 + nN2O4)], so 0.113 = (b2/a)[753/(760×(a + b))], i.e. b2/(a(a + b)) = 0.114 ...(2)
By (1) and (2): b2/a = 0.114×0.020 = 2.3×10-3 ...(3), so b2 = 2.3×10-3(0.02 − b), or b2 + 0.0023b − 4.6×10-5 = 0.
b = [−0.0023 + √((0.0023)2 + 4×4.6×10-5)]/2 = [−0.0023 + √(1.90×10-4)]/2 = 5.73×10-3. By (1), a = 0.014.
(b) 2NO2(aq) + 2H2O(l) → HNO2 + H3O+ + NO3-. Total NO2 mole = 5.73×10-3 + 2×(moles of N2O4 from NO2) = 5.73×10-3 + 2×0.014 = 0.0337. This gives 0.0337/2 mole each of HNO2, H3O+ and NO3-.
[HNO2] = 0.0337×1000/(2×250) = 0.0674 M; [H+] = 0.0337×1000/(2×250) = 0.0674 M.
Due to the common ion effect (H3O+ furnished by HNO3), the dissociation of HNO2 is suppressed. Ka = [H+][NO2-]/[HNO2] = 0.0674×[NO2-]/0.0674 = 4.5×10-4, so [NO2-] = 4.5×10-4 M. Also pH = −log[H+] = −log 0.0674 = 1.17.
(c) π = C·S·T×(number of particles present in solution) = 0.0674×0.0821×298×3 (2NO2 furnishes three particles) = 4.95 atm.
(d) Eq. of CaO required = Eq. of HNO2 + Eq. of HNO3 = (0.0337/2)×1 + (0.0337/2)×1 = 0.0337. Moles of CaO required = 0.0337/2, i.e. w/56 = 0.0337/2.
Corrected: wCaO = 0.0337×56/2 = 0.944 g. (The book prints 0.924 g, which does not follow from 0.0337.)

Teacher's Note: Dimerisation gives a and b; dissolving NO2 gives HNO2 and HNO3 in equal amount, then use common-ion effect.

Exam Note: Show each part separately; parts (a) to (d) carry marks.

Question 144. (Question statement is not printed in the source book; solution given below.)

Solution. CH3COOH + Na+ + CN- ⇌ CH3COO- + Na+ + HCN
Keq = [CH3COO-][HCN]/([CH3COOH][CN-]) ...(i)
For CH3COOH and HCN in same solution: K1 = [CH3COO-][H+]/[CH3COOH] ...(ii); K2 = [CN-][H+]/[HCN] ...(iii)
By (ii) and (iii): Keq = K1/K2 = 1.8×10-5/4.9×10-10 = 3.674×104.

Teacher's Note: Divide the two Ka expressions so that [H+] cancels.

Exam Note: Keq is the ratio of the two acid constants.

Question 145. (Question statement is not printed in the source book; solution given below.)

Solution. NaX + H2O ⇌ no hydrolysis because pH = 7.0; NaY + H2O → NaOH + HY, pH = 9.0; NaZ + H2O → NaOH + HZ, pH = 11.0.
Thus the acidic character order for acids is HX > HY > HZ.
For NaY: [OH-] = 10-5 (pH = 9, pOH = 5). Ch = 10-5, i.e. C√(KH/C) = 10-5, or √(Kw×C/Ka) = 10-5, so 10-14×0.1/Ka = 10-10, giving Ka for HY = 10-5.
Similarly, Ka for HZ = 10-9.

Teacher's Note: A neutral salt means a strong acid; more basic salt means weaker parent acid.

Exam Note: Rank acids by pH of their sodium salts.

Question 146. (Question statement is not printed in the source book; solution given below.)

Solution. The conjugate base (here HC8H4O4-) of a polybasic acid (here H2C8H4O4) is amphiprotic and can act as either an acid or a base, because it can donate its remaining acidic hydrogen atom or accept an acidic hydrogen atom and revert to the original acid.
Acid: HC8H4O4-(aq) + H2O(l) ⇌ H3O+ + C8H4O42-; pKa2 = 5.44; Ka2 = [H3O+][C8H4O42-]/[HC8H4O4-] ...(i)
Hydrolysis: HC8H4O4-(aq) + H2O(l) ⇌ H2C8H4O4 + OH-; pKH = 11.06; KH = [H2C8H4O4][OH-]/[HC8H4O4-] ...(ii)
Also for H2C8H4O4: H2C8H4O4 ⇌ H+ + HC8H4O4-; Ka1 = [H+][HC8H4O4-]/[H2C8H4O4] ...(iii)
By (ii) and (iii): KH×Ka1 = [H+][OH-] = Kw ...(iv)
Assuming HC8H4O4- having low degree of dissociation as well as low degree of hydrolysis, acidic nature of HC8H4O4- and hydrolysis of HC8H4O4- producing C8H4O42- and H2C8H6O4 of almost equal concentration: [H2C8H4O4] = [C8H4O42-] ...(v)
From (i), (ii) and (v): KH/Ka2 = [OH-]/[H+] ...(vi). Also Kw = [H+][OH-] ...(vii). By (vi) and (vii): Kw = [H+]×KH×[H+]/Ka2 ...(viii).
By (iv) and (viii): KH×Ka1 = [H+]2×KH/Ka2, or [H+]2 = Ka1×Ka2, i.e. [H+] = √(Ka1×Ka2), so pH = ½[pKa1 + pKa2] = ½[2.94 + 5.44] = 4.19.
Notes (from the book): 1. The pH is independent of salt concentration in case of acidic salt solution. 2. All polybasic acids (except H2SO4) are weak acids and the relation pH = ½[pKa1 + pKa2] holds good. 3. The relation is derived by using reasonable assumptions and doing some intricate algebra. The assumptions include that if pKa2 is high, HA- is weak acid, the solution will have high pH. If pKa2 is large, HA- is likely to act as a strong weak base. Thus, if both pKa1 and pKa2 are large, pH will be high.

Teacher's Note: Amphiprotic ion: pH is the mean of pKa1 and pKa2, independent of concentration.

Exam Note: Quote pH = (pKa1 + pKa2)/2 for an acid salt.

Question 147. (Question statement is not printed in the source book; solution given below.)

Solution. [H+] formed due to electrolytic oxidation = 4 m moles.
Na2HPO4 + Na3PO4: initial mmol 0.08×100 = 8 and 0.02×100 = 2. [H+] will be used by PO43- to give H2PO4-: PO43- + 2H+ → H2PO4- (2, 4, 0 → 0, 0, 2).
Thus a new buffer containing Na2HPO4 (8 mmol) and H2PO4- (2 mmol) will remain in solution.
pH = pKa(H2PO4-) + log [Na2HPO4]/[H2PO4-] = 7.2 + log 8/2.
Corrected: pH = 7.2 + 0.602 = 7.80. (The book prints 7.81; that value needs pKa = 7.21.)

Teacher's Note: Strong acid generated converts PO4 3- first, leaving a HPO4 2- / H2PO4- buffer.

Exam Note: Use Henderson equation with the new buffer mole ratio.

Question 148. (Question statement is not printed in the source book; solution given below.)

Solution. CH3COOH + NaOH → CH3COONa + H2O
At 1/3 neutralisation: [conjugate base] = [CH3COO-] = 1/3 and [acid] = [CH3COOH] = 2/3.
pH1 = −log Ka + log (1/3)/(2/3) = −log Ka − log 2
At 2/3 neutralisation: [conjugate base] = 2/3, [acid] = 1/3.
pH2 = −log Ka + log (2/3)/(1/3) = −log Ka + log 2
ΔpH = pH1 − pH2 = log ½ − log 2 = −2 log 2.

Teacher's Note: Apply Henderson at each stage; pKa cancels in the difference.

Exam Note: Final answer is independent of Ka.

Question 149. (Question statement is not printed in the source book; solution given below.)

Solution. (3)
Λm(HX) = x/10, Λm(HY) = x. Also α = Λm/Λm0. Let α1 and α2 be the degree of dissociation of 0.01 M HX and 0.1 M HY.
α1/α2 = [Λm(HX)/Λm0(HX)]/[Λm(HY)/Λm0(HY)] = (x/10)/(x) = 1/10 (taking equal limiting values).
HX: 0.01(1 − α1), 0.01α1, 0.01α1; Ka1 = 0.01α12 (α1 << 1).
HY: 0.1(1 − α2), 0.1α2, 0.1α2; Ka2 = 0.1α22 (α2 << 1).
Ka1/Ka2 = (0.01α12)/(0.1α22) = (1/10)(1/10)2 = 1/1000.
log Ka1 − log Ka2 = −3, so pKa1 − pKa2 = 3.

Teacher's Note: Alpha from conductance ratio, then Ka = C alpha squared for each weak acid.

Exam Note: Concentration ratio of 10 also enters Ka.

Single Integer Answer Problems

Question Single Integer 1. 500 mL of HCl of pH 4.3010 is allowed to react with 500 mL of pH 9.6990 NaOH solution at 300 K. If temperature remains constant, approximate pH of resulting solution is ....

Solution. Answer (from key): Seven (7).
[H+] = 10-4.301 = 5×10-5 M; pOH of NaOH = 14 − 9.699 = 4.301, so [OH-] = 5×10-5 M. Equal volumes and equal moles neutralise exactly, so pH ≈ 7.

Teacher's Note: Compare moles of H+ and OH-; equal moles mean neutral.

Exam Note: Check pOH of the base before comparing.

Question Single Integer 2. 300 mL of 5×10-2 M HCl is allowed to react with 200 mL of 5×10-2 M NaOH at 300 K. The pH of resulting solution at 300 K is ......

Solution. Answer (from key): Two (2).
HCl = 300×0.05 = 15 mmol; NaOH = 200×0.05 = 10 mmol. Excess H+ = 5 mmol in 500 mL = 0.01 M, so pH = 2.

Teacher's Note: Excess strong acid left sets the pH after mixing.

Exam Note: Divide excess millimoles by total volume.

Question Single Integer 3. 500 mL of 0.01 M CH3COOH + 500 mL of 0.02 M CH3COONa gives a pH equal to 5.3010. The pKb of CH3COO- is .......

Solution. Answer (from key): Nine (9).
Acid = 5 mmol, salt = 10 mmol (buffer). pH = pKa + log 2 = pKa + 0.3010 = 5.3010, so pKa = 5. pKb = 14 − 5 = 9.

Teacher's Note: Buffer with salt twice acid: pH = pKa + log 2.

Exam Note: Use pKa + pKb = 14 at the end.

Question Single Integer 4. Kb for MeOH an indicator is 10-9. The pH at which it shows a colour change is .......

Solution. Answer (from key): Five (5).
Colour change occurs when [MeOH] = [Me+], so pOH = pKb = 9 and pH = 14 − 9 = 5.

Teacher's Note: Colour change at half ionisation: pOH equals pKb.

Exam Note: Convert pOH to pH.

Question Single Integer 5. Ksp of M(OH)2 is 5×10-16 at 25°C. The pH of its saturated solution at 25°C is .......

Solution. Answer (from key): Nine (9).
Ksp = 4s3 = 5×10-16, so s = 5×10-6 M; [OH-] = 2s = 10-5 M; pOH = 5; pH = 9.

Teacher's Note: Hydroxide is twice the solubility for M(OH)2.

Exam Note: Use 4s^3, not s^3.

Question Single Integer 6. The equilibrium constant of a strong acid (HA) with weak base BOH is 1011. The pH of 0.10 M solution of BA is .......

Solution. Answer (from key): Six (6).
For BOH + H+ → B+ + H2O, K = Kb/Kw = 1011, so Kb = 10-3. Kh = Kw/Kb = 10-11; [H+] = √(10-11×0.1) = 10-6 M; pH = 6.

Teacher's Note: Convert K of neutralisation to Kb, then to Kh of the salt.

Exam Note: Use [H+] = sqrt(Kh C) for the cation.

Question Single Integer 7. 10 mL of 0.25 M H2SO4 is completely neutralised by 0.125 M solution of NH3. The pH of the solution at the equivalence point is ....... if Kb for NH3 = 10-5.

Solution. Answer (from key): Five (5).
H2SO4 = 2.5 mmol needs 5 mmol NH3 = 40 mL. Total volume = 50 mL, [NH4+] = 5/50 = 0.1 M. pH = ½[pKw − pKb − log C] = ½[14 − 5 + 1] = 5.

Teacher's Note: Diprotic acid needs twice the moles of NH3; then hydrolyse NH4+.

Exam Note: Find total volume before the concentration.

Question Single Integer 8. 100 mL of 0.20 M weak acid HA is completely neutralised by 0.20 M NaOH. Kb for A- is 10-3, the pOH at the equivalence point is .......

Solution. Answer (from key): Two (2).
NaA formed = 20 mmol in 200 mL = 0.1 M. [OH-] ≈ √(KbC) = √(10-3×0.1) = 10-2 M, so pOH = 2.

Teacher's Note: Equal volumes double the volume, halving the salt concentration.

Exam Note: Hydrolysis of A-: [OH-] = sqrt(Kb C).

Question Single Integer 9. One litre of 1 M solution of an acid HA (Ka = 10-4 at 25°C) has pH = 2. It is diluted by water so that new pH becomes double. The solution was diluted to 5×10a mL. The value of a is .......

Solution. Answer (from key): Six (6).
New pH = 4, [H+] = 10-4. Ka = x2/(C − x) = 10-4 gives C = 2×10-4 M (x = 10-4). V = 1 mol/(2×10-4 M) = 5000 L = 5×106 mL, so a = 6.

Teacher's Note: Dilution lowers C until [H+] = 1e-4; keep the (C - x) term.

Exam Note: Convert litres to mL for the final answer.

Question Single Integer 10. Kw of pure water is 10-12 at 60°C. The pH of pure water at 60°C is .......

Solution. Answer (from key): Six (6).
[H+] = √Kw = 10-6 M, so pH = 6 (water is still neutral).

Teacher's Note: Neutral water has [H+] = sqrt(Kw) at any temperature.

Exam Note: pH 6 at 60 C is neutral, not acidic.

Question Single Integer 11. An aqueous solution of 0.24 M aniline (Kb = 4.166×10-10) is mixed with NaOH solution to maintain anilinium ion concentration to 1×10-8 M. The pOH of NaOH solution used was .......

Solution. Answer (from key): Two (2).
[OH-] = Kb[B]/[BH+] = 4.166×10-10×0.24/10-8 = 10-2 M, so pOH = 2.

Teacher's Note: Common-ion effect: Kb fixes [OH-] from the BH+ ratio.

Exam Note: Take aniline concentration as 0.24 M.

Question Single Integer 12. A certain buffer solution equals concentration of X- and HX. Kb for X- is 10-10. The pH of buffer is .......

Solution. Answer (from key): Four (4).
Ka = Kw/Kb = 10-4; with equal [X-] and [HX], pH = pKa = 4.

Teacher's Note: Equal acid and conjugate base give pH = pKa.

Exam Note: Get Ka from Kb of the conjugate base first.

Question Single Integer 13. Two weak acids HA and HB have same pH when their concentration ratio is 3 : 1. The ratio of the dissociation constants of HB and HA is .......

Solution. Answer (from key): Three (3).
Same pH means same [H+] = √(KaC). So Ka(HA)·CA = Ka(HB)·CB, giving Ka(HB)/Ka(HA) = CA/CB = 3.

Teacher's Note: Equal [H+] means Ka x C is equal for both acids.

Exam Note: State which acid has the larger concentration.

Question Single Integer 14. Conjugate base of a weak acid has Kb = 10-9. The equilibrium constant for the reaction of acid with strong base is 10a. The value of a is .......

Solution. Answer (from key): Nine (9).
HA + OH- → A- + H2O has K = Ka/Kw = 1/Kb = 109, so a = 9.

Teacher's Note: Acid plus strong base: K = Ka/Kw = 1/Kb.

Exam Note: Write K as a power of ten.

Question Single Integer 15. Ksp of SrF2 is 1×10-10. The solubility of SrF2 in 0.1 M NaF is 1×10-a M. The value of a is .......

Solution. Answer (from key): Eight (8).
s = Ksp/[F-]2 = 10-10/(0.1)2 = 10-8 M, so a = 8.

Teacher's Note: Common ion F- dominates; ignore F- from SrF2.

Exam Note: Square the common-ion concentration.

Question Single Integer 16. pH of 0.1 M NaCl solution is .......

Solution. Answer (from key): Seven (7).
NaCl is a salt of strong acid and strong base, so no hydrolysis; pH = 7.

Teacher's Note: Neither ion hydrolyses.

Exam Note: Neutral salt: pH 7 at 25 C.

Question Single Integer 17. The solubility of RNH2(g) in water at 1 atm and 27°C is 24.63 litre per litre water. If pKb of RNH2 = 4, the maximum pOH of the resulting solution will be .......

Solution. Answer (from key): Two (2).
n = PV/RT = 1×24.63/(0.0821×300) = 1 mol per litre, so C = 1 M. [OH-] = √(KbC) = √(10-4×1) = 10-2 M, pOH = 2.

Teacher's Note: Convert gas volume to moles with PV = nRT first.

Exam Note: Use the saturated concentration for the maximum.

Question Single Integer 18. If Ksp of HgSO4 is 6.4×10-5 mole2 litre-2, then solubility of HgSO4 in mole/m3 is .........

Solution. Answer (from key): Eight (8).
s = √(6.4×10-5) = 8×10-3 mol/L = 8 mol/m3 (1 m3 = 1000 L).

Teacher's Note: Convert mol per litre to mol per cubic metre (x1000).

Exam Note: 1:1 salt, so s = sqrt(Ksp).

Question Single Integer 19. The dissociation constant of a monoprotic acid, morphine a pain killer, is 10-a. Its 0.01 M solution with its 0.01 M sodium salt shows a pH 6, the value of pKa is .....

Solution. Answer (from key): Six (6).
Equal acid and salt concentrations give a buffer with pH = pKa = 6.

Teacher's Note: Equal concentrations of acid and salt: pH = pKa.

Exam Note: Quote a = pKa = 6.

Question Single Integer 20. The molar concentration of SO42- required to precipitate RaSO4 for 2×10-4 mole of Ra2+ in 500 mL is 10-a M. If Ksp of RaSO4 is 4×10-11 then value of a is .....

Solution. Answer (from key): Seven (7).
[Ra2+] = 2×10-4/0.5 = 4×10-4 M. [SO42-] = 4×10-11/4×10-4 = 10-7 M, so a = 7.

Teacher's Note: Convert moles to molarity using 500 mL first.

Exam Note: Precipitation starts when ionic product equals Ksp.

Question Single Integer 21. The A2+ left in solution when 50.0 mL of 0.20 M A(NO3)2 is added to 50 mL of 1.5 M NaCl is 9.95×10-a M. If Ksp of ACl2 is 5.6×10-4 then the value of a is .....

Solution. Answer (from key): Four (4).
The key gives a = 4 (i.e. [A2+] = 9.95×10-4 M, which matches Ksp/[Cl-]2 with [Cl-] taken as 0.75 M, the initial mixed value). Check: after mixing [A2+] = 0.1 M and [Cl-] = 0.75 M, the ionic product 0.056 exceeds Ksp, so ACl2 precipitates. Note: if the chloride used up in the precipitate is subtracted ([Cl-] ≈ 0.55 M), the leftover is about 1.8×10-3 M, so this key value needs a human check.

Teacher's Note: Check Qsp against Ksp, then find leftover ion from Ksp and chloride.

Exam Note: State whether chloride consumed is subtracted.

Question Single Integer 22. The solubility of CoS in 0.10 M H2S and 0.15 M H+ solution is a×10-6 M. The value of a is ..... Given K for H2S ⇌ 2H+ + S2- is 1×10-21 and Ksp CoS = 3.11×10-26

Solution. Answer (from key): Seven (7).
[S2-] = 10-21×0.1/(0.15)2 = 4.44×10-21 M. Solubility = [Co2+] = 3.11×10-26/4.44×10-21 = 7.0×10-6 M, so a = 7.

Teacher's Note: Acid fixes [S2-]; solubility equals Ksp divided by it.

Exam Note: Use the overall H2S constant, squared [H+].

Question Single Integer 23. If Ka1 and Ka2 for H2S are 1×10-7 and 1×10-14 respectively. Then hydrolysis constant for S2- + H2O ⇌ HS- + OH- is .......

Solution. Answer (from key): One (1).
Kh = Kw/Ka2 = 10-14/10-14 = 1.

Teacher's Note: First hydrolysis of S2- uses Ka2 of H2S.

Exam Note: Kh = Kw/Ka2, not Ka1.

Question Single Integer 24. The pKeq for A- + H3O+ ⇌ HA + H2O is −6, then pKa for HA is .....

Solution. Answer (from key): Six (6).
Keq = 1/Ka = 106, so Ka = 10-6 and pKa = 6.

Teacher's Note: Reverse of dissociation: Keq = 1/Ka.

Exam Note: Watch the sign of pKeq.

Question Single Integer 25. pH of 0.1 M NaCl solution is .....

Solution. Answer (from key): Seven (7).
Salt of strong acid and strong base is neutral, pH = 7.

Teacher's Note: No hydrolysis for either ion.

Exam Note: Neutral at 25 C.

Question Single Integer 26. A buffer mixture containing equal mole of HB and its conjugate base B- (Kb = 10-10) has pH equal to.....

Solution. Answer (from key): Four (4).
Ka = 10-14/10-10 = 10-4; equal moles give pH = pKa = 4.

Teacher's Note: Equal acid and base forms: pH = pKa.

Exam Note: Convert Kb to Ka first.

Question Single Integer 27. The pH at which an indicator pKb = 5.00 changes its colour is .....

Solution. Answer (from key): Nine (9).
pKa = 14 − 5 = 9; colour changes when [acid form] = [base form], so pH = pKa = 9.

Teacher's Note: Midpoint of colour change: pH = pKa = 14 - pKb.

Exam Note: State pKa from pKb.

Question Single Integer 28. Ethylenediamine NH2C2H4NH2 a base (B) can add 1 or 2 protons. The successive pKb values are 4 and 7 respectively. The p[BH22+] in 0.001 M solution of ethylenediamine is.....

Solution. Answer (from key): Seven (7).
B + H2O ⇌ BH+ + OH- (Kb1 = 10-4) gives [BH+] ≈ [OH-]. Then BH+ + H2O ⇌ BH22+ + OH-: [BH22+] = Kb2[BH+]/[OH-] = Kb2 = 10-7 M, so p[BH22+] = 7.

Teacher's Note: In a dibasic base, [BH+] roughly equals [OH-], so second species equals Kb2.

Exam Note: Second ionisation is far smaller than first.

Question Single Integer 29. The per cent error in [H3O+] made by neglecting the ionisation of water in a 1.0×10-6 M NaOH solution.

Solution. Answer (from key): One (1).
Including water: [H+]([H+] + 10-6) = 10-14 gives [H+] = 9.9×10-9 M. Neglecting water gives 10-8 M. Error = (10-8 − 9.9×10-9)/9.9×10-9 ×100 ≈ 1%.

Teacher's Note: Water supplies OH- too, so the quadratic is needed at 1e-6 M.

Exam Note: Percent error is relative to the true value.

Question Single Integer 30. The pH of solution resulting when 50 mL of 0.20 M HCl is mixed with 50 mL of 0.20 M CH3COOH (pKa = 1.8×10-5)

Solution. Answer (from key): One (1).
Total volume 100 mL; [HCl] = 0.1 M. The strong acid suppresses ionisation of the weak acid, so [H+] ≈ 0.1 M and pH = 1.

Teacher's Note: Strong acid dominates and suppresses the weak acid.

Exam Note: Halve concentration after mixing equal volumes.

Question Single Integer 31. The pKeq for the reaction of Na2A and HCl at exactly half neutralisation of Na2A is 6, then pKeq for A2- + H+ ⇌ HA- will be.....

Solution. Answer (from key): Six (6).
At exactly half neutralisation [A2-] = [HA-], so the value 6 is pKa2 of H2A. The key takes the pK value asked as 6 (strictly the reverse reaction has K = 1/Ka2 = 106).

Teacher's Note: Half neutralisation means equal base and conjugate acid.

Exam Note: Link the value to pKa2.

Question Single Integer 32. If Keq. for A- + H3O+ ⇌ HA + H2O is 106, then pKa for acid HA is.....

Solution. Answer (from key): Six (6).
Ka = 1/Keq = 10-6, so pKa = 6.

Teacher's Note: Reverse reaction of acid dissociation gives Keq = 1/Ka.

Exam Note: Take the reciprocal before the log.

Question Single Integer 33. The solubility of M(OH)x is 10-4 M. If its pKsp is 4×10-12 (Ksp = 4×10-12), then the value of X is .....

Solution. Answer (from key): Two (2).
Ksp = s(xs)x = xxsx+1. For x = 2: 4×(10-4)3 = 4×10-12. So X = 2.

Teacher's Note: Try x = 1, 2, 3 in x^x s^(x+1) until it matches.

Exam Note: Write Ksp generally for M(OH)x.

Question Single Integer 34. An acid indicator (Ka = 10-5) will have 50% its basic form at pOH.

Solution. Answer (from key): Nine (9).
50% basic form means pH = pKa = 5, so pOH = 14 − 5 = 9.

Teacher's Note: Half ionised: pH = pKa, then convert to pOH.

Exam Note: Answer asked as pOH, not pH.

Question Single Integer 35. The solubility product of AgCl is 1×10-10 M2 at 25°C. The minimum volume of water (in m3) required to dissolve 1.435 g AgCl at 25°C.

Solution. Answer (from key): One (1).
s = √(10-10) = 10-5 mol/L. Moles of AgCl = 1.435/143.5 = 0.01 mol. Volume = 0.01/10-5 = 1000 L = 1 m3.

Teacher's Note: Moles divided by solubility gives volume; convert litres to cubic metres.

Exam Note: 1000 L equals 1 cubic metre.

Question Single Integer 36. The molar solubility of Ag2CO3 (Ksp = 4×10-13) in 0.1 M Na2CO3 is 10-a M. The value of a is ..........

Solution. Answer (from key): Six (6).
[Ag+] = 2s and [CO32-] ≈ 0.1: (2s)2(0.1) = 4×10-13, so s2 = 10-12, s = 10-6 M, a = 6.

Teacher's Note: Carbonate from Na2CO3 is the common ion; neglect carbonate from the salt.

Exam Note: Remember Ag+ is 2s.

Question Single Integer 37. The pH of an aqueous solution of 0.1 M NH4Cl and 0.01 M NH4OH (pKb = 5) is .......

Solution. Answer (from key): Eight (8).
Basic buffer: pOH = pKb + log([salt]/[base]) = 5 + log 10 = 6, so pH = 8.

Teacher's Note: Basic buffer uses pOH = pKb + log(salt/base).

Exam Note: Convert pOH to pH.

Question Single Integer 38. The pOH of resulting 500 mL solution by mixing 25 mL of 0.1 M NaOH and 25 mL 0.08 M HCl, finally diluted with water is ........

Solution. Answer (from key): Three (3).
NaOH = 2.5 mmol, HCl = 2.0 mmol; excess OH- = 0.5 mmol in 500 mL = 10-3 M, so pOH = 3.

Teacher's Note: Find excess base in millimoles, then dilute to final volume.

Exam Note: Use 500 mL as the final volume.

Question Single Integer 39. If aM solution of weak acid HA has same pH as bM solution of weak acid HB. Also if a/b = 4, then the ratio of dissociation constant of two acids HB and HA will be ........

Solution. Answer (from key): Four (4).
Same [H+]: Ka(HA)·a = Ka(HB)·b, so Ka(HB)/Ka(HA) = a/b = 4.

Teacher's Note: Same pH means Ka x C equal; ratio follows the concentration ratio.

Exam Note: Ratio is HB over HA, equal to a/b.

Question Single Integer 40. The minimum pH required to prevent the precipitation of ZnS in a solution having 0.1 M ZnCl2 and 0.1 M H2S if Ka1 × Ka2 for H2S is 10-20 and Ksp of ZnS = 10-21.

Solution. Answer (from key): One (1).
Maximum [S2-] = 10-21/0.1 = 10-20 M. [H+]2 = Ka1Ka2[H2S]/[S2-] = 10-20×0.1/10-20 = 0.1, so [H+] = 0.316 M and pH = 0.5. The key gives 1 (the nearest integer to 0.5); needs a human check as exact pH is 0.5.

Teacher's Note: Find the highest S2- allowed, then the [H+] that keeps it that low.

Exam Note: Exact pH is 0.5; key rounds to 1.

Question Single Integer 41. The per cent error in [H+] made by neglecting ionisation of water in 1.0×10-6 M NaOH is ..........

Solution. Answer (from key): One (1).
[H+] with water included = 9.9×10-9 M (from [H+]([H+] + 10-6) = 10-14); without water = 10-8 M. Error ≈ 1%.

Teacher's Note: Same working as Single Integer 29: include water to get the true value.

Exam Note: Error is about 1 percent.

Question Single Integer 42. 0.01 mole of NaOH in 10 litre water are added. How much the pH water changes?

Solution. Answer (from key): Four (4).
[OH-] = 0.01/10 = 10-3 M, so pH = 11. Pure water has pH 7, change = 4 units.

Teacher's Note: Added base gives [OH-] = 1e-3; compare with pH 7.

Exam Note: Report the change, not the final pH.

Question Single Integer 43. The approximate pH of a solution of benzoic acid (Ka = 6.4×10-5) having density 2.06 g/dm3 is .........

Solution. Answer (from key): Three (3).
C = 2.06/122 = 0.0169 M. [H+] = √(6.4×10-5×0.0169) = 1.04×10-3 M, so pH ≈ 2.98 ≈ 3.

Teacher's Note: Divide density by molar mass 122 to get molarity.

Exam Note: Weak acid: [H+] = sqrt(Ka C).

Question Single Integer 44. A mixture of KOH and Ca(OH)2 weighing 6.13 g is completely neutralized by an acid. If mass percent of KOH in mixture is 45.68 and normality of acid is 20 N, then find the approximate volume (in mL) of acid used in neutralisation.

Solution. Answer (from key): Seven (7).
KOH = 0.4568×6.13 = 2.80 g = 0.05 eq. Ca(OH)2 = 3.33 g = 3.33/37 = 0.09 eq. Total = 0.14 eq. V = 0.14/20 L = 7 mL.

Teacher's Note: Equivalents of base equal equivalents of acid; Ca(OH)2 has equivalent mass 37.

Exam Note: Compute equivalents separately for each base.

Question Single Integer 45. 50 mL of 0.2 N NaCN is mixed with 50 mL of 0.2 M HCl. Calculate approximate concentration of [H+] in molarity ×10-6 if Kb for CN- is 2×10-5.

Solution. Answer (from key): Seven (7).
Equal moles give 10 mmol HCN in 100 mL = 0.1 M. Ka = 10-14/2×10-5 = 5×10-10. [H+] = √(5×10-10×0.1) = 7.07×10-6 M, i.e. 7×10-6.

Teacher's Note: Complete neutralisation leaves the weak acid HCN.

Exam Note: Find Ka of HCN from Kb of CN-.

Question Single Integer 46. The dissociation constant of a substituted benzoic acid at 25°C is 1×10-4. The pH of a 0.01 M solution of its sodium salt is: (IIT 2009)

Solution. Answer (from key): Eight (8).
[OH-] = √(KwC/Ka) = √(10-14×0.01/10-4) = 10-6 M, so pOH = 6 and pH = 8.

Teacher's Note: Sodium salt of a weak acid hydrolyses to give OH-.

Exam Note: Use Kw C / Ka under the root.

Question Single Integer 47. The total number of diprotic acids among the following is ....... H3PO4, H2SO4, H3PO3, H2CO3, H2S2O7, H3BO3, H3PO2, H2CrO4, H2SO3 (IIT 2010)

Solution. Answer (from key): Six (6).
Diprotic (two replaceable H): H2SO4, H3PO3, H2CO3, H2S2O7, H2CrO4, H2SO3 = 6. (H3PO4 is triprotic, H3BO3 is monoprotic Lewis acid, H3PO2 is monoprotic.)

Teacher's Note: Count only O-H hydrogens; H3PO3 has two, H3PO2 has one.

Exam Note: Basicity is the number of ionisable H, not total H.

Question Single Integer 48. Amongst the following, the total number of compounds whose aqueous solution turns red litmus paper to blue is ....... KCN, K2SO4, (NH4)2C2O4, NaCl, Zn(NO3)2, FeCl3, K2CO3, NH4NO3, LiCN (IIT 2010)

Solution. Answer (from key): Three (3).
Basic salts (weak acid + strong base): KCN, K2CO3, LiCN = 3. K2SO4 and NaCl are neutral; Zn(NO3)2, FeCl3, NH4NO3 are acidic; (NH4)2C2O4 is not basic.

Teacher's Note: Red litmus turns blue only in basic solution: strong base with weak acid.

Exam Note: Classify each salt by parent acid and base.

Question Single Integer 49. In one litre saturated solution of AgCl [Ksp of AgCl = 1.6×10-10], 0.1 mole of CuCl [Ksp of CuCl = 1.0×10-6] is added. The resultant concentration of Ag+ in the solution is 1.6×10-X. The value of X is ....... (IIT 2011)

Solution. Answer (from key): Seven (7).
CuCl dissolves: [Cl-] ≈ √(10-6) = 10-3 M (AgCl contributes negligible chloride). [Ag+] = 1.6×10-10/10-3 = 1.6×10-7 M, so X = 7.

Teacher's Note: The more soluble CuCl fixes [Cl-]; AgCl then adjusts.

Exam Note: Chloride from CuCl suppresses AgCl solubility.

Objective Problems (One Answer Correct)

Question Objective 1. The equilibrium constant for CN- + CH3COOH ⇌ HCN + CH3COO- is: (Given pKb for CN- = 4.69 and pKb for CH3COO- = 9.25)
(a) 3.7×104
(b) 2.8×10-5
(c) 1.97
(d) 0.5

Solution. Answer (from book): (a) 3.7×104.
Keq = Ka(CH3COOH)/Ka(HCN). pKa(HCN) = 14 − 4.69 = 9.31, Ka = 4.9×10-10; pKa(CH3COOH) = 4.75, Ka = 1.77×10-5. Keq = 1.77×10-5/4.9×10-10 = 3.7×104 (3.6×104 by exact logs; (a) is the nearest).

Teacher's Note: Competition between two acids: Keq is the ratio of their Ka values.

Exam Note: Convert pKb of conjugate bases to Ka first.

Question Objective 2. The ionisation of codeine in 0.01 M solution shows pH = 10.1. The ionisation constant of codeine is:
(a) 1.6×10-4
(b) 1.6×10-6
(c) 1.6×10-8
(d) 1.6×10-3

Solution. Answer (from book): (b) 1.6×10-6.
pH 10.1 so codeine is a base. [OH-] = 10-3.9 = 1.259×10-4 = cα = 0.01α, so α = 0.0125. Kb = cα2/(1 − α) = 0.01×(0.0125)2/(1 − 0.0125) = 1.6×10-6.

Teacher's Note: Weak base: alpha from [OH-] = c alpha, then Kb = c alpha squared over (1 - alpha).

Exam Note: Use pOH = 14 - pH for a base.

Question Objective 3. The solubility of a sparingly soluble salt A(OH)2 (molar mass 192.3 g mol-1) is 19.23 g/litre at 300 K. The pH of its saturated solution assuming 80% ionisation at 300 K is:
(a) 1.0970
(b) 12.9030
(c) 13.2041
(d) 12.0000

Solution. Answer (from book): (c) 13.2041.
S = 19.23/192.3 = 0.1 mol/L. A(OH)2 ⇌ A2+ + 2OH-: [OH-] = 0.1×2×80/100 = 0.16 M, pOH = 0.7958, pH = 13.2041.

Teacher's Note: Convert g/L to mol/L, then apply 80 percent ionisation to two OH- per formula unit.

Exam Note: Remember the factor 2 for hydroxide ions.

Question Objective 4. Kb for CH2ClCOO- is 7.41×10-12. The pH of 0.1 M CH2ClCOONa in water is:
(a) 7.93
(b) 6.66
(c) 1.94
(d) 12.06

Solution. Answer (from book): (a) 7.93.
Hydrolysis: [OH-] = ch = √(Kb×c) = √(7.41×10-12×0.1) = 8.606×10-7 M, pOH = 6.065, pH = 7.93.

Teacher's Note: Salt of a weak acid: [OH-] = sqrt(Kb c), giving a slightly basic solution.

Exam Note: Use the given Kb directly; no Kw needed.

Question Objective 5. Equimolar solution of CaCl2 and K2SO4 are mixed in equal volumes. If Ksp of CaSO4 is 9.1×10-6, the maximum molar concentrations of CaCl2 and K2SO4 which will lead no precipitation of CaSO4 is:
(a) 0.006
(b) 0.004
(c) 0.002
(d) 0.008

Solution. Answer (from book): (a) 0.006.
Let the molar concentration of each salt be a M. After mixing equal volumes [Ca2+] = [SO42-] = a/2. So (a/2)(a/2) = Ksp = 9.1×10-6, a2 = 4×9.1×10-6, a = 6.033×10-3 M ≈ 0.006 M.

Teacher's Note: Mixing equal volumes halves each concentration before comparing with Ksp.

Exam Note: No precipitation up to ionic product = Ksp.

Question Objective 6. If Ksp of ZnS is 1.0×10-21, the minimum volume of water is required for the dissolution of 0.097 g ZnS is:
(a) 3.16×105 litre
(b) 3.16×107 litre
(c) 3.16×109 litre
(d) 3.16×103 litre

Solution. Answer (from book): (b) 3.16×107 litre.
S = √Ksp = √(10-21) = 3.16×10-11 mol/L = 3.16×10-11×97 g/L = 3.065×10-9 g/L. Volume = 0.097/3.065×10-9 = 3.16×107 litre.

Teacher's Note: Solubility in g/L divided into the mass gives the least volume.

Exam Note: Use molar mass 97 for ZnS.

Question Objective 7. Ksp of M(OH)x is 27×10-12 and its solubility in water is 10-3 mole litre-1. The value of x is:
(a) 1
(b) 2
(c) 3
(d) 4

Solution. Answer (from book): (c) 3.
Ksp = xx·Sx+1 = xx(10-3)x+1 = 27×10-12. Putting x = 1, 2, 3: x = 3 gives 27×10-12.

Teacher's Note: Write Ksp = x^x S^(x+1) and test integers.

Exam Note: Only x = 3 reproduces 27e-12.

Question Objective 8. The dissociation constants for acetic acid are 1.8×10-5 and 1.805×10-5 at 300 and 310 K respectively. The enthalpy of deprotonation for acetic acid is:
(a) 50 cal
(b) 52.8 cal
(c) 51.6 cal
(d) 48.48 cal

Solution. Answer (from book): (c) 51.6 cal.
Van't Hoff: 2.303 log(K2/K1) = (ΔH/R)·[(T2 − T1)/(T1T2)], i.e. 2.303 log(1.805×10-5/1.8×10-5) = (ΔH/R)×10/(300×310). With R = 2 cal K-1 mol-1, ΔH = 51.6 cal.

Teacher's Note: Use the van t Hoff equation with R = 2 cal as the book does.

Exam Note: A small change in K gives a small enthalpy.

Question Objective 9. Solubility product of A2X3·4H2O is given by:
(a) [A3+]2[X2-]3[H2O]4
(b) [2A3+]2[3X2-]3[H2O]4
(c) [2A2+]2[3X3-]3[H2O]4
(d) [A3+]2[X2-]3

Solution. Answer (from book): (d) [A3+]2[X2-]3.
Hydrated water molecules do not interfere in Ksp.

Teacher's Note: Water of crystallisation is left out of the Ksp expression.

Exam Note: Ksp contains only the ions raised to their coefficients.

Question Objective 10. pH of some solutions is given by [H+] = (pKa1 + pKa2)/2. For which type of compounds this formula is not valid?
(a) NaHS
(b) NaH2PO4
(c) NaH2PO3
(d) NaH2BO3

Solution. Answer (from book): (d) NaH2BO3.
The formula is valid for acidic salts as well as for zwitter ionic molecules. NaH2BO3 is neither an acid salt nor exists.

Teacher's Note: The formula holds for amphiprotic acid salts of polybasic acids.

Exam Note: Boric acid is monobasic, so no acid salt exists.

Question Objective 11. Which one is not correct statement about buffer mixture?
(a) NH4OH + its conjugate acid
(b) CH3COONa + its conjugate base
(c) 1 millimole of NaCN + 0.5 millimole of HCl in 1 litre
(d) 0.5 millimole of NaCN + 1 millimole of HCl in 1 litre

Solution. Answer (from book): (d).
Case (c): NaCN + HCl → NaCl + HCN: 1, 0.5 → 0.5, 0, 0.5, 0.5, i.e. 0.5 NaCN + 0.5 HCN, a buffer. Case (d): 0.5, 1 → 0, 0.5, 0.5, 0.5, which leaves excess strong acid and is not a buffer.

Teacher's Note: A buffer needs weak acid and its conjugate base together, not excess strong acid.

Exam Note: Check which species remain after reaction.

Question Objective 12. A buffer solution is prepared by dissolving 1 mole of CH3COOH and 'a' mole of Zn acetate. The pH of solution is 4.7447 and pKa for CH3COOH = 4.7447. The number of mole of zinc acetate are:
(a) 1
(b) 2
(c) 0.5
(d) 0.25

Solution. Answer (from book): (c) 0.5.
pH = pKa + log(2a/1) (since (CH3COO)2Zn gives 2 mol CH3COO-). 4.7447 = 4.7447 + log 2a, so 2a = 1 and a = 1/2.

Teacher's Note: pH equals pKa only when salt anion equals acid; zinc acetate gives two acetates.

Exam Note: Count two acetate ions per formula unit.

Question Objective 13. The percentage error in H+ concentration provided by 10-8 M HCl if ionisation of water is not neglected is:
(a) 3%
(b) 2%
(c) 5%
(d) 4%

Solution. Answer (from book): No listed option is correct (book key: (c) 5%).
Corrected: Let [OH-] from water = a. Then a(a + 10-8) = 10-14, giving a = 9.5×10-8 M, so the true [H+] = a + 10-8 = 1.05×10-7 M. Neglecting water gives 10-8 M, so the error is about (1.05×10-7 − 10-8)/1.05×10-7 ≈ 90%. The book writes a = 0.95×10-7 but then uses 9.5×10-9 in the error step to reach 5%, an exponent slip.

Teacher's Note: At 1e-8 M the water term dominates, so the error is very large.

Exam Note: Include water ionisation when acid is below 1e-6 M.

Question Objective 14. The degree of dissociation of water is 1.8×10-9 at 300 K. The self ionisation constant for water is:
(a) 1.0×10-14
(b) 1.8×10-16
(c) 3.23×10-18
(d) none of these

Solution. Answer (from book): (c) 3.23×10-18.
[H3O+] = Cα = 10-7 = [OH-], so C = 10-7/1.8×10-9 = 55.6. Ks.i. = [H3O+][OH-]/[H2O]2 = 10-14/(55.6)2 = 3.23×10-18.

Teacher's Note: Divide Kw by the square of the water concentration, 55.6 M.

Exam Note: Distinguish Kw from the self-ionisation constant.

Question Objective 15. The change in pH of water when 0.01 mole of NaOH are added in 10 litre water is:
(a) 11 units
(b) 3 units
(c) 4 units
(d) 2 units

Solution. Answer (from book): (c) 4 units.
[OH-] = 0.01/10 = 10-3, pOH = 3, pH = 11. Thus pH changes from 7 to 11, by 4 units.

Teacher's Note: Strong base at 1e-3 M gives pH 11 from the starting 7.

Exam Note: Report the change, not the final pH.

Question Objective 16. Which of the following has concentration dependent pH?
(a) CH3COONa
(b) CH2NH2COOH
(c) CH3COONH4
(d) NaHS

Solution. Answer (from book): (a) CH3COONa.
pH of acidic salts, salts of weak acid + weak base and zwitter ionic species is independent of concentration. CH3COONa (weak acid + strong base) has concentration dependent pH.

Teacher's Note: Weak-weak salts, acid salts and zwitterions have pH independent of concentration.

Exam Note: Check parent acid and base strengths.

Question Objective 17. An acid-base indicator (pKa = 4.5271) has the acid form red and basic form blue. If we need 75% red to be converted into 75% blue form in solution, the change in pH of solution should be:
(a) 4.05
(b) 5.0
(c) 0.95
(d) 0.80

Solution. Answer (from book): (c) 0.95.
HIn ⇌ H+ + In-. For 75% red: pH = pKa + log(25/75) = 4.5271 − 0.4771 = 4.05. For 75% blue: pH = 4.5271 + log(75/25) = 5.0. ΔpH = 5.0 − 4.05 = 0.95.

Teacher's Note: Apply Henderson twice: 25:75 and 75:25.

Exam Note: The change is asked, not the end pH.

Question Objective 18. 0.1 mole of CH3NH2 (pKb = 3.3010) is mixed with 0.08 mol of HCl and volume is made to 1 litre. The pH of solution is:
(a) 7.32
(b) 11.4642
(c) 10.097
(d) 11.5020

Solution. Answer (from book): (c) 10.097.
CH3NH2 + HCl → CH3NH3Cl: 0.1, 0.08 → 0.02, 0, 0.08. Basic buffer: pOH = pKb + log(0.08/0.02) = 3.3010 + 0.6020 = 3.903, pH = 10.097.

Teacher's Note: Partial neutralisation of a weak base gives a basic buffer.

Exam Note: Use salt over base inside the log for pOH.

Question Objective 19. 0.08 mole of CH3NH2 is mixed with 1.0 mole of HCl and volume is made to 1 litre. The pH of solution is:
(a) 1.699
(b) 2.699
(c) 10.097
(d) 7.32

Solution. Answer (from book): (a) 1.699.
CH3NH2 + HCl → CH3NH3Cl with excess HCl: book takes [H+] = 0.02 = 2×10-2, pH = 1.699. Note: the book's working (0.08 and 1 → 0 and 0.02) corresponds to 0.1 mol HCl; with 1.0 mol HCl the excess would be 0.92 mol (pH ≈ 0.04). The printed statement needs a human check.

Teacher's Note: Excess strong acid after neutralising the amine fixes the pH.

Exam Note: Subtract moles of amine from moles of HCl.

Question Objective 20. 0.04 M solution of CH3NH2 (pKb = 3.3010) is diluted to reduce its molar concentration to half. The change in pH during dilution is:
(a) +0.1615
(b) −0.1615
(c) +0.2615
(d) −0.2615

Solution. Answer (from book): Corrected: (b) −0.1615 (book key: (a)).
Kb = 5×10-4. I: c = 0.04: Kb = cα2/(1 − α) gives α = 0.1056, [OH-] = cα = 4.224×10-3, pOH = 2.3743. II: c = 0.02: α = 0.1456, [OH-] = 2.912×10-3, pOH = 2.5358. pOH increases by 0.1615, so pH = 14 − pOH decreases by 0.1615 (ΔpH = −0.1615). The book writes +0.1615 although it also states that pH decreases.

Teacher's Note: Dilution lowers [OH-] of a base, so pH falls.

Exam Note: Sign matters: pH decreases on diluting a base.

Question Objective 21. The enthalpy change for first proton neutralisation of H2S is −33.7 kJ mol-1. What is enthalpy change for first ionisation of H2S?
(a) 23.6
(b) 33.7
(c) 20.8
(d) 10.4

Solution. Answer (from book): (a) 23.6.
H2S + OH- → H2O + HS-, ΔH = −33.7 kJ; H+ + OH- → H2O, ΔH = −57.3 kJ. Subtracting: H2S ⇌ H+ + HS-, ΔH = −33.7 + 57.3 = +23.6 kJ.

Teacher's Note: Subtract the strong acid-strong base neutralisation enthalpy.

Exam Note: Ionisation of a weak acid is endothermic.

Question Objective 22. Which will have pH closer to 1.0?
(a) 100 mL of 0.1 M HCl + 100 mL 0.1 M NaOH
(b) 55 mL of 0.1 M HCl + 45 mL of 0.1 M NaOH
(c) 10 mL of 0.1 M HCl + 90 mL of 0.1 M NaOH
(d) 75 mL of 0.2 M HCl + 25 mL 0.2 M NaOH

Solution. Answer (from book): (d).
(d): HCl = 75×0.2 = 15 mmol, NaOH = 5 mmol; excess 10 mmol H+ in 100 mL, [H+] = 0.1, pH = 1. (a) is neutral (pH 7), (b) leaves 1 mmol in 100 mL = 0.01 M (pH 2), (c) is alkaline.

Teacher's Note: Excess H+ in millimoles over total volume.

Exam Note: Check all four mixtures, not just one.

Question Objective 23. The pH of 0.1 M solution of the following salts increases in the order:
(a) NaCl < NH4Cl < NaCN < HCl
(b) HCl < NH4Cl < NaCl < NaCN
(c) NaCN < NH4Cl < NaCl < HCl
(d) HCl < NaCl < NaCN < NH4Cl

Solution. Answer (from book): (b).
HCl is an acid having lowest pH, NaCN(aq) is alkaline and NH4Cl is acidic due to hydrolysis; NaCl is neutral. Order: HCl < NH4Cl < NaCl < NaCN.

Teacher's Note: Rank strong acid, acidic salt, neutral salt, basic salt.

Exam Note: NaCl is neutral and sits between acidic and basic.

Question Objective 24. The conjugate acid of NH2- is:
(a) NH3
(b) NH2OH
(c) NH4+
(d) N2H4

Solution. Answer (from book): (a) NH3.
NH2- (base) + H+ → NH3 (conjugate acid).

Teacher's Note: Add one proton to get the conjugate acid.

Exam Note: Do not add or remove other atoms.

Question Objective 25. The compound that is not Lewis acid is:
(a) BF3
(b) AlCl3
(c) SnCl4
(d) CCl4

Solution. Answer (from book): (d) CCl4.
CCl4 has complete octet and cannot expand its octet (carbon has no d-orbitals), so it is not a Lewis acid.

Teacher's Note: A Lewis acid needs an empty orbital to accept an electron pair.

Exam Note: Carbon cannot expand its octet.

Question Objective 26. The pKa of acetyl salicylic acid (aspirin) is 3.5. The pH of gastric juice in human stomach is about 2 − 3 and the pH in the small intestine is about 8. Aspirin will be:
(a) unionised in small intestine and in the stomach
(b) completely ionised in the small intestine and in the stomach
(c) ionised in the stomach and almost unionised in the small intestine
(d) ionised in the small intestine and almost unionised in the stomach

Solution. Answer (from book): (d).
Aspirin, an acid, will be completely ionised in alkaline medium (pH 8 in the small intestine, well above pKa) and mostly unionised in the acidic stomach (pH below pKa).

Teacher's Note: A weak acid ionises when pH is above pKa and stays unionised below it.

Exam Note: Compare medium pH with pKa 3.5.

Question Objective 27. Which of the following is the strongest acid?
(a) ClO3(OH)
(b) ClO2(OH)
(c) SO(OH)2
(d) SO2(OH)2

Solution. Answer (from book): (a) ClO3(OH), i.e. HClO4.
HClO4 is the strongest acid among these because of the higher oxidation number of Cl (+7).

Teacher's Note: More non-hydroxyl oxygens and higher oxidation state mean a stronger oxoacid.

Exam Note: Count non-hydroxyl oxygens on the central atom.

Question Objective 28. pKb of NH4OH is 5. The pH of a mixture containing 10 mL of 0.3 M NH4OH and 200 mL of 0.1 M (NH4)3PO4 is:
(a) 5
(b) 5.3010
(c) 6.3010
(d) 7.6987

Solution. Answer (from book): (d) 7.6987.
mmol of NH4OH = 10×0.3 = 3; mmol of NH4+ = 200×0.1×3 = 60. pOH = 5 + log(60/3) = 5 + log 20 = 6.3010, pH = 14 − 6.3010 = 7.6987.

Teacher's Note: Three NH4+ per formula of ammonium phosphate; then basic buffer formula.

Exam Note: Count 60 mmol NH4+, not 20.

Question Objective 29. Kw for water is 9.5×10-14 at 60°C. An aqueous solution of a salt at 60°C has pH = 7, it is:
(a) acidic
(b) basic
(c) neutral
(d) none of these

Solution. Answer (from book): (b) basic.
Pure water: [H+]2 = 9.65×10-14 (as printed), [H+] ≈ 3.1×10-7 M (neutral, pH about 6.5). If [H+] > 3.1×10-7 the solution is acidic, if < 3.1×10-7 basic. Here [H+] = 10-7, so the solution is basic.

Teacher's Note: At 60 C neutrality is near pH 6.5, so pH 7 is basic.

Exam Note: Compare with sqrt(Kw) at that temperature.

Question Objective 30. 100 mL of 0.005 M H2SO4 is diluted to one litre. The pH of resulting solution is:
(a) 3
(b) 4
(c) 5
(d) 2

Solution. Answer (from book): (a) 3.
meq of H2SO4 before dilution = meq after dilution: 0.005×2×100 = 1000×N, so N = 10-3, [H+] = 10-3 and pH = 3.

Teacher's Note: H2SO4 gives two H+, then dilute tenfold.

Exam Note: Use normality, not molarity.

Question Objective 31. How much water should be added to 300 mL of 0.2 M solution of acetic acid (Ka = 1.8×10-5) to increase its degree of dissociation two times?
(a) 1.2 litre
(b) 1.5 litre
(c) 0.9 litre
(d) 0.7 litre

Solution. Answer (from book): (c) 0.9 litre.
Initially α1 = √(Ka/c1) = √(1.8×10-5/0.2) = 9.49×10-3. If α is doubled, α2 = 1.898×10-2. Since α is small, c1α12 = c2α22, so c2 = 0.2×(1/2)2 = 0.05 M. From c1V1 = c2V2: 300×0.2 = 0.05×V2, V2 = 1200 mL. Water added = 900 mL = 0.9 L.

Teacher's Note: Doubling alpha needs a fourfold dilution since alpha varies as 1/sqrt(c).

Exam Note: Subtract the original 300 mL.

Question Objective 32. If pKb for C6H5O- is 4, what is the pH of 0.1 M C6H5O- in solution at 25°C?
(a) 13.0
(b) 12.5
(c) 11.5
(d) 10.5

Solution. Answer (from book): (c) 11.5.
C6H5O- + H2O → C6H5OH + OH-: [OH-] = √(Kbc) = √(10-4×0.1) = 3.16×10-3 M, pOH = 2.5, pH = 11.5.

Teacher's Note: Weak base: [OH-] = sqrt(Kb c), then pH = 14 - pOH.

Exam Note: Take Kb = 1e-4 from pKb = 4.

Question Objective 33. 2,4-dinitrophenol (pKa = 4) acts as buffer and if pH of this buffer is adjusted to 5, the ratio of concentration of dissociated and undissociated molecules of 2,4-dinitrophenol is:
(a) 1
(b) 10
(c) 0.1
(d) 0.01

Solution. Answer (from book): (b) 10.
pH = pKa + log[conjugate base]/[acid]: 5 = 4 + log[conj. base]/[acid], so [conj. base]/[acid] = [dissociated ions]/[undissociated acid] = 10.

Teacher's Note: pH one unit above pKa means a tenfold excess of the conjugate base.

Exam Note: Ratio of dissociated to undissociated is the Henderson ratio.

Question Objective 34. In a saturated solution of AgCl, addition of NaCl is made drop by drop in excess. Which graph correctly represents the change? (Graphs of [Ag+] on the y-axis against [Cl-] on the x-axis: (a) a horizontal straight line; (b) a curve starting high and falling steeply, then flattening towards the axis; (c) a rising straight line; (d) a falling straight line.)

Solution. Answer (from book): (b).
[Ag+][Cl-] = Ksp, or [Ag+] = Ksp/[Cl-]. If [Cl-] increases, then to keep Ksp constant [Ag+] decreases (a hyperbola). After sufficient addition of [Cl-], [Ag+] becomes almost constant (near zero).

Teacher's Note: Common ion effect gives an inverse relation, a hyperbola.

Exam Note: Ksp constant means [Ag+] varies as 1/[Cl-].

Question Objective 35. Solubility of Ag2CrO4 in 0.2 M K2CrO4 is 'a' and solubility of Ag2CrO4 in 0.4 M AgNO3 is 'b', then:
(a) a = b
(b) a > b
(c) a < b
(d) cannot be predicted in absence of Ksp of Ag2CrO4

Solution. Answer (from book): (d).
In 0.2 M K2CrO4: Ksp = [Ag+]2×0.2, so the solubility varies as √Ksp (book: [Ag+] = √(Ksp/0.2) = 2.23√Ksp). In 0.4 M AgNO3: Ksp = (0.4 + S)2×S ≈ 0.16 S, so b = 6.25 Ksp. One depends on √Ksp and the other on Ksp, so which is larger depends on the value of Ksp.

Teacher's Note: One solubility scales with sqrt(Ksp), the other with Ksp itself.

Exam Note: State both dependences before choosing (d).

Question Objective 36. 0.1 M solution of H3A being a weak tribasic acid having Ka1, Ka2 and Ka3 as 10-5, 10-9 and 10-13 respectively. If pX represents −log([A3-]/[HA2-]), then the value of pX is:
(a) 7
(b) 8
(c) 9
(d) 10

Solution. Answer (from book): (c) 10.
[H+] comes from all three steps, but II and III give far less, so [H+] = √(Ka1×c) = √(10-5×0.1) = 10-3. For HA2- ⇌ H+ + A3-: K3 = 10-13 = 10-3[A3-]/[HA2-], so [A3-]/[HA2-] = 10-10 and pX = 10.

Teacher's Note: First step fixes [H+]; third constant then gives the ratio.

Exam Note: Use K3 with [H+] = 1e-3.

Question Objective 37. pH of mixture having 0.1 M NH4OH and 0.1 M NH4Cl is equal to pKw − pKb. If 0.1 M NH4OH and 0.1 M (NH4)2SO4 are taken, the pH will be:
(a) pKw − pKb
(b) pKw + pKb
(c) pKw − pKb + log 2
(d) pKw − pKb − log 2

Solution. Answer (from book): (d).
Case I: pOH = pKb + log[NH4+]/[NH4OH] = pKb, so pH = pKw − pKb. Case II: [NH4+] = 0.1×2 = 0.2, so pOH = pKb + log 2 and pH = pKw − pKb − log 2.

Teacher's Note: Ammonium sulphate gives two NH4+, doubling the salt term.

Exam Note: Extra salt lowers the pH of a basic buffer.

Question Objective 38. In the equilibrium BaF2(s) ⇌ Ba2+(aq) + 2F-(aq), if [Ba2+] is increased two times, then [F-] in solution will:
(a) increase two times
(b) increase four times
(c) decrease two times
(d) decrease to 1/√2 times

Solution. Answer (from book): (d).
Ksp = [Ba2+][F-]2, so [F-] = √(Ksp/[Ba2+]). With [Ba2+] doubled, [F-] = √(Ksp/2[Ba2+]) = (1/√2) of the original.

Teacher's Note: Ksp fixed: [F-] varies as the inverse square root of [Ba2+].

Exam Note: Square-root dependence, not simple inverse.

Question Objective 39. The pH of 100 mL solution containing 0.3 M NH4+, 0.2 M NH4OH (Kb = 4.74, i.e. pKb = 4.74) and 0.01 M HCl in it is:
(a) 9.05
(b) 8.66
(c) 7.46
(d) 8.05

Solution. Answer (from book): (a) 9.05.
NH4OH + HCl → NH4Cl + H2O: 0.2, 0.01 → 0.19, 0. [NH4+] = 0.30 + 0.01 = 0.31, [NH4OH] = 0.19. pOH = 4.74 + log(0.31/0.19) = 4.95, pH = 14 − 4.95 = 9.05.

Teacher's Note: HCl converts some base to its salt, then use the basic buffer formula.

Exam Note: Update both base and salt amounts.

Question Objective 40. The pH of a 100 mL solution containing 0.3 mole NH4+, 0.2 M NH4OH and 0.01 M NaOH in it is:
(a) 10.12
(b) 9.12
(c) 8.12
(d) 8.5

Solution. Answer (from book): (b) 9.12.
NH4+ + NaOH → NH4OH + Na+: [NH4+] = 0.3 − 0.01 = 0.29, [NH4OH] = 0.2 + 0.01 = 0.21. pOH = 4.74 + log(0.29/0.21) = 4.880, pH = 14 − 4.880 = 9.12.

Teacher's Note: NaOH converts NH4+ into NH4OH; the ratio shifts toward base.

Exam Note: pOH uses salt over base.

Question Objective 41. A weak acid has pH = 4, then:
(a) C = 10-3, α = 10%
(b) C = 10-3, α = 10-6
(c) [A-] = 10-5
(d) Ka = 10-2, α = 10

Solution. Answer (from book): (a).
HA ⇌ H+ + A-: [H+] = [A-] = αC = (10/100)×10-3 = 10-4, so pH = 4. The other options do not give [H+] = 10-4 (and α = 10 is impossible).

Teacher's Note: Check [H+] = alpha C for each option.

Exam Note: Alpha cannot exceed 1.

Question Objective 42. An acidic buffer solution can be prepared by mixing the solution of:
(a) ammonium acetate and acetic acid
(b) ammonium chloride and ammonium hydroxide
(c) sulphuric acid and sodium sulphate
(d) sodium chloride and sodium hydroxide

Solution. Answer (from book): (a).
A weak acid (CH3COOH) and its conjugate base CH3COO- (from the salt) make an acidic buffer.

Teacher's Note: Acidic buffer is weak acid plus its salt.

Exam Note: Strong acid or strong base pairs cannot buffer.

Question Objective 43. The pH of a 10-8 molar solution of HCl in water is:
(a) 8
(b) −8
(c) between 7 and 8
(d) between 6 and 7

Solution. Answer (from book): (d) between 6 and 7.
HCl is a strong acid; at 10-8 M the water ionisation cannot be ignored. Exact: [H+] = 10-8 + [OH-] = 1.05×10-7 M, so pH = 6.98, i.e. between 6 and 7.

Teacher's Note: An acid cannot make the solution basic; pH stays just below 7.

Exam Note: Include water ionisation for very dilute acid.

Question Objective 44. Of the given anions, the strongest Bronsted base is:
(a) ClO-
(b) ClO2-
(c) ClO3-
(d) ClO4-

Solution. Answer (from book): (a) ClO-.
The stronger the acid, the weaker is its conjugate base. HOCl is the weakest of the four acids, so ClO- is the strongest base.

Teacher's Note: Weakest conjugate acid means strongest base.

Exam Note: Rank the chlorine oxoacids first.

Question Objective 45. At 90°C, pure water has [H3O+] = 10-6 mole litre-1. What is the value of Kw at 90°C?
(a) 10-6
(b) 10-12
(c) 10-14
(d) 10-8

Solution. Answer (from book): (b) 10-12.
Kw = [H3O+][OH-] and [H3O+] = [OH-] in pure water, so Kw = 10-6×10-6 = 10-12.

Teacher's Note: Pure water has equal H+ and OH-.

Exam Note: Multiply the two concentrations.

Question Objective 46. The precipitate of CaF2 (Ksp = 1.7×10-10) is obtained when equal volumes of the following are mixed:
(a) 10-4 M Ca2+ + 10-4 M F-
(b) 10-2 M Ca2+ + 10-3 M F-
(c) 10-5 M Ca2+ + 10-3 M F-
(d) 10-3 M Ca2+ + 10-5 M F-

Solution. Answer (from book): (b).
After mixing equal volumes each concentration halves. For (b): Q = [Ca2+][F-]2 = (10-2/2)(10-3/2)2 = (1/8)×10-8 = 1.2×10-9 > Ksp, so precipitation occurs. (a), (c) and (d) give Q far below 1.7×10-10.

Teacher's Note: Halve concentrations on mixing, then compare Q with Ksp.

Exam Note: Square the fluoride concentration.

Question Objective 47. A certain buffer solution contains equal concentration X- and HX. Then Kb for X- is 10-10. The pH of the buffer is:
(a) 4
(b) 7
(c) 10
(d) 14

Solution. Answer (from book): (a) 4.
pH = −log Ka + log([conjugate base]/[acid]) = 10-4 term + log 1 = 4, since pKa + pKb = 14 gives pKa = 4.

Teacher's Note: Equal base and acid gives pH = pKa = 14 - pKb.

Exam Note: Convert Kb to Ka first.

Question Objective 48. A certain weak acid has a dissociation constant of 1.0×10-4. The equilibrium constant for its reaction with a strong base is:
(a) 1.0×10-4
(b) 1.0×10-10
(c) 1.0×1010
(d) 1.0×1014

Solution. Answer (from book): (c) 1.0×1010.
HX ⇌ H+ + X-, Ka = 10-4. HX + NaOH ⇌ NaX + H2O has Keq = [X-]/([HX][OH-]) = Ka/Kw = 10-4/10-14 = 1010.

Teacher's Note: Reaction with OH- combines Ka with 1/Kw.

Exam Note: Keq = Ka/Kw.

Question Objective 49. The best indicator for detection of end point in titration of a weak acid and a strong base is:
(a) methyl orange (3 to 4)
(b) methyl red (5 to 6)
(c) bromothymol blue (6 to 7.5)
(d) phenolphthalein (8 to 9.6)

Solution. Answer (from book): (d) phenolphthalein.
Phenolphthalein is a good indicator for strong alkali titrations: the equivalence point of a weak acid with a strong base is basic (pH above 7), within its range 8 to 9.6.

Teacher's Note: Equivalence point pH must fall inside the indicator range.

Exam Note: Weak acid with strong base ends in the basic region.

Question Objective 50. The following equilibrium is established when hydrogen chloride is dissolved in acetic acid: HCl + CH3COOH ⇌ Cl- + CH3COOH2+. The set that characterises the conjugate acid-base pairs is:
(a) (HCl, CH3COOH) and (CH3COOH2+, Cl-)
(b) (HCl, CH3COOH2+) and (CH3COOH, Cl-)
(c) (CH3COOH2+, HCl) and (Cl-, CH3COOH)
(d) (HCl, Cl-) and (CH3COOH2+, CH3COOH)

Solution. Answer (from book): (d).
HCl (acid) → Cl- (conjugate base); CH3COOH (base) + H+ → CH3COOH2+ (conjugate acid). Pairs differ by one proton: (HCl, Cl-) and (CH3COOH2+, CH3COOH).

Teacher's Note: A conjugate pair differs by exactly one proton.

Exam Note: Identify which species donates the proton.

Question Objective 51. The compound insoluble in acetic acid is:
(a) calcium oxide
(b) calcium carbonate
(c) calcium oxalate
(d) calcium hydroxide

Solution. Answer (from book): (c) calcium oxalate.
Calcium oxalate is the salt of a weak acid (oxalic) that is insoluble even in acetic acid; the others (oxide, carbonate, hydroxide) react with and dissolve in acetic acid.

Teacher's Note: Oxalate is too weakly basic to be protonated by acetic acid.

Exam Note: Insoluble salts dissolve in acid only if the anion is basic enough.

Question Objective 52. The compound whose 0.1 M solution is basic is:
(a) ammonium acetate
(b) ammonium chloride
(c) ammonium sulphate
(d) sodium acetate

Solution. Answer (from book): (d) sodium acetate.
CH3COO- + Na+ + H2O ⇌ CH3COOH + Na+ + OH-: salt of weak acid and strong base hydrolyses to give OH-.

Teacher's Note: Strong base with weak acid gives a basic salt solution.

Exam Note: Ammonium acetate is nearly neutral, not basic.

Question Objective 53. When equal volumes of the following solutions are mixed, precipitation of AgCl (Ksp = 1.8×10-10) will occur only with:
(a) 10-4 M (Ag+) and 10-4 M (Cl-)
(b) 10-5 M (Ag+) and 10-5 M (Cl-)
(c) 10-6 M (Ag+) and 10-6 M (Cl-)
(d) 10-10 M (Ag+) and 10-10 M (Cl-)

Solution. Answer (from book): (a).
For (a): Q = [Ag+][Cl-] = (10-4/2)(10-4/2) = 2.5×10-9 > Ksp, so precipitation occurs. (b) gives 2.5×10-11, (c) 2.5×10-13, (d) far smaller, all below Ksp.

Teacher's Note: Halve each concentration on mixing, then Q versus Ksp.

Exam Note: Precipitate only when Q exceeds Ksp.

Question Objective 54. The degree of dissociation of water at 25°C is 1.9×10-7% and density is 1.0 g cm-3. The equilibrium constant for water is:
(a) 1.0×10-14
(b) 2.0×10-14
(c) 2.0×10-16
(d) 1.0×10-8

Solution. Answer (from book): (c) 2.0×10-16.
H2O ⇌ H+ + OH-: [H+] = Cα with CH2O = 1000/18 = 55.6 M and α = 1.9×10-9. Keq = Cα·Cα/C(1 − α) ≈ Cα2 = (55.6×1.9×10-9)2/55.6 = 2×10-16.

Teacher's Note: Equilibrium constant uses [H2O] = 55.6 M in the denominator.

Exam Note: Convert percent alpha to a fraction.

Question Objective 55. Which one is more acidic in aqueous solution?
(a) NiCl2
(b) FeCl3
(c) AlCl3
(d) BeCl2

Solution. Answer (from book): (b) FeCl3.
Both FeCl3 and AlCl3 furnish 3 OH- per metal ion on hydrolysis; Fe(OH)3 is the weakest base among the corresponding hydroxides, so Fe3+ hydrolyses most and gives the most acidic solution. (The book's printed reason is worded differently; the answer (b) is consistent with hydrolysis constants.)

Teacher's Note: More highly charged, weakly basic hydroxide cation hydrolyses most.

Exam Note: Compare strength of the parent bases.

Question Objective 56. The following acids have been arranged in the order of decreasing acid strength. Identify the correct order: ClOH (I), BrOH (II), IOH (III).
(a) I > II > III
(b) II > I > III
(c) III > II > I
(d) I > III > II

Solution. Answer (from book): (a) I > II > III.
HOCl > HOBr > HOI, due to more electronegative nature of the halogen.

Teacher's Note: More electronegative halogen pulls electrons from O-H, making H more acidic.

Exam Note: Acidity falls down the halogen group.

Question Objective 57. If pKb for fluoride ion at 25°C is 10.83, the ionisation constant of hydrofluoric acid in water at this temperature is:
(a) 1.74×10-5
(b) 3.52×10-3
(c) 6.75×10-4
(d) 5.38×10-2

Solution. Answer (from book): (c) 6.75×10-4.
HF ⇌ H+ + F-: pKa + pKb = 14, so pKa = 14 − 10.83 = 3.17 and Ka = 6.76×10-4.

Teacher's Note: Conjugate pair: pKa + pKb = 14.

Exam Note: Convert pKa back to Ka.

Question Objective 58. The solubility of A2X3 is y mol dm-3. Its solubility product is:
(a) 6y4
(b) 64y4
(c) 36y5
(d) 108y5

Solution. Answer (from book): (d) 108y5.
A2X3 ⇌ 2A3+ + 3X2-: Ksp = (2y)2(3y)3 = 4×27 y5 = 108y5.

Teacher's Note: Raise each ion concentration to its coefficient.

Exam Note: Ksp for A2X3 is 108 S^5.

Question Objective 59. Among the following the one having lowest Ksp is:
(a) Mg(OH)2
(b) Ca(OH)2
(c) Ba(OH)2
(d) Be(OH)2

Solution. Answer (from book): (d) Be(OH)2.
The solubility of alkaline earth metal hydroxides increases down the group; the more the solubility, the more is Ksp. So Be(OH)2 has the lowest Ksp.

Teacher's Note: Hydroxide solubility rises down group 2.

Exam Note: Lowest Ksp means the least soluble.

Question Objective 60. Which of the following is correct for 1.0 M solution of strong acid HA and 1.0 M solution of weak acid HB?
(a) HA: pH = 0; HB: pH < 1
(b) HA: [H+] = [A-]; HB: [H+] = [A-]
(c) HA: [HA] = 0; HB: [HB] = (1 − α)
(d) All of these

Solution. Answer (from book): (d) All of these (book key).
HA → H+ + A- (complete); HB ⇌ H+ + B-. For the strong acid pH = 0, [HA] = 0, [H+] = [A-]; for the weak acid [HB] = 1 − α. The book accepts all statements; note the statement “HB: pH < 1” holds only if Ka of HB is fairly large, so this needs a human check.

Teacher's Note: Strong acid is fully ionised; weak acid leaves 1 - alpha undissociated.

Exam Note: Test each statement for both acids.

Question Objective 61. Which order is not correct for basic nature?
(a) NH3 > PH3
(b) H2O > H2S
(c) NH3 > NCl3
(d) NF3 > NH3

Solution. Answer (from book): (d) NF3 > NH3.
F is more electronegative than H and thus it reduces the electron pair donation nature in NF3, so NF3 is a much weaker base than NH3.

Teacher's Note: Electron-withdrawing atoms reduce lone-pair availability.

Exam Note: Compare electronegativity of substituents on N.

Question Objective 62. Which of the following acid-base neutralisation does not form water with salt?
(a) Al2O3(s) + NaOH(aq)
(b) Al2O3 + HCl(aq)
(c) SiO2 + NaOH(aq)
(d) ZnO + NaOH(aq)

Solution. Answer (from book): (a).
Al2O3 + 2NaOH(aq) + 3H2O(l) → 2NaAl(OH)4: water is consumed (as a ligand), not formed.

Teacher's Note: Aluminate formation uses up water.

Exam Note: Amphoteric oxide with alkali forms a complex.

Question Objective 63. How many mole of HCl must be added to 1 litre aqueous solution of HCl of pH = 3 in order to decrease its pH to 2?
(a) 0.009
(b) 0.001
(c) 1
(d) 0.1

Solution. Answer (from book): (a) 0.009.
[H+] at pH 3 = 10-3 M, so 0.001 mol HCl in 1 L; at pH 2 it is 0.01 mol. Moles of HCl to be added = 0.01 − 0.001 = 0.009.

Teacher's Note: Final moles minus initial moles of HCl.

Exam Note: Ignore volume change for 1 litre.

Question Objective 64. Which one is correct decreasing order of solubility of AgCl? (i) in water (ii) in 0.1 M NaCl (iii) in 0.1 M BaCl2 (iv) in 0.1 M NH3
(a) (iv) > (iii) > (ii) > (i)
(b) (iv) > (i) > (ii) > (iii)
(c) (iv) > (ii) > (iii) > (i)
(d) (i) > (ii) > (iii) > (iv)

Solution. Answer (from book): (b) (iv) > i > ii > iii.
AgCl forms a complex with NH3 and thus is more soluble. Solubility of a salt decreases in presence of a common ion: 0.1 M BaCl2 gives 0.2 M Cl-, more than 0.1 M NaCl. Order: NH3 > water > NaCl > BaCl2.

Teacher's Note: Complexing agent raises solubility; common ion lowers it.

Exam Note: BaCl2 supplies twice the common chloride.

Question Objective 65. 0.1 M aqueous solution of BOH (a weak base) has pH equal to 12 at 27°C. Assuming Kw at 27°C = 1.0×10-14, calculate the osmotic pressure of 0.1 M BOH(aq).
(a) 2.71 atm
(b) 2.46 atm
(c) 0.246 atm
(d) 24.6 atm

Solution. Answer (from book): (a) 2.71 atm.
pH = 12 so [OH-] = 10-2 = Cα, α = 10-2/0.1 = 0.1. Total particles present = (1 − α) + α + α = 1 + α = 1.1. π = CST(1 + α) = 0.1×0.0821×300×1.1 = 2.71 atm.

Teacher's Note: Osmotic pressure uses van t Hoff factor 1 + alpha for a weak base.

Exam Note: Alpha comes from the given pH.

Question Objective 66. 300 mL of saturated, clear solution of CaC2O4(aq.) is completely oxidised by 6 mL of 0.001 M KMnO4 in acid medium. The Ksp of CaC2O4 is:
(a) 25×10-8
(b) 25×10-9
(c) 25×10-10
(d) 25×10-11

Solution. Answer (from book): (c) 25×10-10.
Mn7+ + 5e → Mn2+ (5 per KMnO4); (C3+)2 → 2C4+ + 2e. meq of C2O42- = meq of KMnO4: M×2×300 = 0.001×5×6, so M = 5×10-5. Ksp = [Ca2+][C2O42-] = 5×10-5×5×10-5 = 25×10-10.

Teacher's Note: Redox titration gives oxalate concentration; Ca2+ equals it in a saturated solution.

Exam Note: n-factor of oxalate is 2, of permanganate 5.

Question Objective 67. Solubility of AgCl (in mole/litre) in a mixture of 1 litre solution containing 0.05 M NaCl and 0.05 M BaCl2 is: (Given Ksp of AgCl = 1.0×10-10)
(a) 6.6×10-8
(b) 6.6×10-10
(c) 1.0×10-9
(d) 1.0×10-8

Solution. Answer (from book): (b) 6.6×10-10.
[Cl-] in mixture = 0.05 (from NaCl) + 2×0.05 (from BaCl2) = 0.15 M. AgCl ⇌ Ag+ + Cl-: Ksp = S×0.15 = 1.0×10-10, so S = 6.6×10-10.

Teacher's Note: Total chloride from both salts is the common ion.

Exam Note: BaCl2 gives two chloride ions.

Question Objective 68. Select the correct choice when 100 mL of 0.5 M hydrazoic acid (N3H, Ka = 3.6×10-4) and 400 mL of 0.1 M cyanic acid (HOCN having Ka = 8×10-4) are mixed:
(a) pH = 2
(b) [N3-] = 3.6×10-3
(c) [OCN-] = 6.4×10-3
(d) all of these

Solution. Answer (from book): (d) all of these.
After mixing (500 mL): [N3H] = 100×0.5/500 = 0.1 M, [HOCN] = 400×0.1/500 = 0.08 M. Let N3H give x and HOCN give y of anion: [H+] = x + y. Both are weak, so 0.1 − x ≈ 0.1 and 0.08 − y ≈ 0.08. Dividing Ka expressions: x/y = 3.6×10-5/6.4×10-5 = 0.5625. Then 8×10-4 = y(0.5625y + y)/0.08, so y = 6.4×10-3 = [OCN-] and x = 3.6×10-3 = [N3-]. [H+] = 10-2, pH = 2.

Teacher's Note: Two weak acids share one [H+]; ratio of anions follows Ka x concentration.

Exam Note: All three statements follow from the same working.

Question Objective 69. Autoprotonation constant for liquid NH3 is 3.46×10-27 at −50°C. The number of anions present in 1 mL of pure NH3 at −50°C is:
(a) 2.08×109
(b) 1×10-15
(c) 6.023×10-5
(d) 1

Solution. Answer (from book): (a) 2.08×109.
2NH3 ⇌ NH4+ + NH2-: K = [NH4+][NH2-]/[NH3]2 = 3.46×10-27, with [NH3] = 1000/17 = 58.82 M. So [NH4+] = [NH2-] = 3.46×10-12 M. Number per litre = 6.023×1023×3.46×10-12 = 2.08×1012, i.e. 2.08×109 per mL.

Teacher's Note: Liquid ammonia self-ionises; concentration of pure liquid is about 58.8 M.

Exam Note: Convert molarity to ions per mL with Avogadro number.

Question Objective 70. Solubility product of AgCl is 1.0×10-10. What minimum volume of water in litre is required to dissolve 4.305 mg of AgCl?
(a) 1
(b) 2
(c) 3
(d) 4

Solution. Answer (from book): (c) 3.
Ksp = S2 = 10-10, S = 10-5 mol/L = 10-5×143.5 g/L = 1.435×10-3 g/L = 1.435 mg/L. 1.435 mg of AgCl needs 1 L, so 4.305 mg needs 4.305/1.435 = 3 L.

Teacher's Note: Solubility in mg/L divided into the mass gives the volume.

Exam Note: Use molar mass 143.5 for AgCl.

Question Objective 71. How many mixed buffers can be obtained using KOH and H3PO4?
(a) 1
(b) 2
(c) 3
(d) 4

Solution. Answer (from book): (c) 3.
Three mixed buffers: KH2PO4 + H3PO4, KH2PO4 + K2HPO4, and K2HPO4 + K3PO4.

Teacher's Note: Each neighbouring pair of phosphate species forms a buffer.

Exam Note: Triprotic acid gives three buffers.

Question Objective 72. Which graph correctly represents addition of NaCl to a saturated solution of AgCl? (Graphs of [Ag+] against [Cl-]: (a) a horizontal straight line; (b) a rising straight line; (c) a falling straight line; (d) a curve falling steeply then flattening towards the axis.)

Solution. Answer (from book): (d).
[Ag+] = Ksp/[Cl-]. Addition of Cl- shows a decrease in [Ag+], i.e. [Ag+] ∝ 1/[Cl-] (Ksp constant), a hyperbola.

Teacher's Note: Inverse proportionality gives a hyperbola, not a straight line.

Exam Note: Ksp constant: Ag+ varies as 1/Cl-.

Question Objective 73. Which reagent can be used to separate one of ions as precipitate from a solution containing Cu2+ and Pb2+ ions?
(a) H2S(g)
(b) NH4NO3
(c) HNO3
(d) H2SO4

Solution. Answer (from book): (d) H2SO4.
PbSO4 is insoluble while CuSO4 is soluble; H2S precipitates both CuS and PbS, so it cannot separate them.

Teacher's Note: Choose a reagent that precipitates only one ion.

Exam Note: Sulphate separates lead from copper.

Question Objective 74. Which can be used to separate F- ion from a solution of F- and Cl- in solution?
(a) AgNO3
(b) Pb(NO3)2
(c) HNO3
(d) H2SO4

Solution. Answer (from book): (a) AgNO3.
AgF is soluble in water while AgCl is insoluble, so AgNO3 precipitates Cl- and leaves F- in solution.

Teacher's Note: Silver fluoride is soluble, silver chloride is not.

Exam Note: Name the precipitate that forms.

Question Objective 75. Except one in rest all cases, K2CO3 solution on addition gives a precipitate:
(a) BaCl2(aq.)
(b) CaBr2(aq.)
(c) (NH4)2SO4
(d) Pb(NO3)2

Solution. Answer (from book): (c) (NH4)2SO4.
K2CO3 and (NH4)2SO4 are both water soluble: K2CO3 + (NH4)2SO4 → K2SO4 + (NH4)2CO3, no precipitate; Ba, Ca and Pb carbonates are insoluble.

Teacher's Note: Carbonates of Ba, Ca and Pb are insoluble; ammonium carbonate is soluble.

Exam Note: Check solubility of every possible product.

Question Objective 76. Arrange the following in increasing order of pH: 1. 0.1 M CH3COONa + 0.1 M CH3COOH; 2. 0.1 M CH3COOH + 0.1 M HCl; 3. 0.1 M CH3COOH; 4. 0.1 M HCl
(a) 2 < 4 < 3 < 1
(b) 1 < 2 < 3 < 4
(c) 2 < 3 < 4 < 1
(d) 4 < 3 < 2 < 1

Solution. Answer (from book): (a) 2 < 4 < 3 < 1.
pH of 0.1 M HCl + 0.1 M CH3COOH is lowest as it has strong acid and CH3COOH (extra H+ supply); then 0.1 M HCl (pH 1); then 0.1 M CH3COOH (pH about 2.9); the acetate buffer has the highest pH (about 4.74).

Teacher's Note: Strong acid is lowest; buffer containing salt is highest.

Exam Note: Strong plus weak acid is most acidic.

Question Objective 77. A solution has pH = 4. It is 1000 times less acidic than another solution of same species of pH:
(a) 1
(b) 2
(c) 3
(d) 4

Solution. Answer (from book): (a) 1.
[H+] = 10-4 for this solution; the other solution has [H+] = 10-1, which is 103 times more acidic, so its pH = 1.

Teacher's Note: Each pH unit is a factor of ten in [H+].

Exam Note: 1000 times means three pH units.

Question Objective 78. pOH of 0.003 M HCl is:
(a) 11 + log 3
(b) 11 − log 3
(c) 7 + log 3
(d) 7 − log 3

Solution. Answer (from book): (a) 11 + log 3.
[H+] = 3×10-3, pH = 3 − log 3, so pOH = 14 − pH = 14 − 3 + log 3 = 11 + log 3.

Teacher's Note: Find pH first, then subtract from 14.

Exam Note: Keep log 3 symbolic as in the options.

Question Objective 79. 10 mL of 10-4 N H2SO4 is diluted with water to have 1 dm3 solution. The pH of this solution is:
(a) 6
(b) slightly more than 6
(c) slightly less than 6
(d) 7

Solution. Answer (from book): Corrected: (c) slightly less than 6 (book key: (b)).
meq of dilute solution = meq of concentrated: N×1000 = 10×10-4, so N = 10-6 and [H+] from the acid = 10-6 M. Water adds a small extra [H+] (≈ 10-8 M), so [H+] ≈ 1.01×10-6 M and pH ≈ 5.996, slightly less than 6. The book adds the water term wrongly and concludes pH > 6.

Teacher's Note: Added water contributes extra H+, so pH sits just below 6.

Exam Note: Water adds a little extra H+.

Question Objective 80. The pH of a solution obtained by mixing 10 mL of 0.1 M HCl and 10 mL of 0.01 M Sr(OH)2:
(a) 1.40
(b) 1.50
(c) 11.70
(d) 12.00

Solution. Answer (from book): (a) 1.40.
meq of HCl = 10×0.1 = 1; meq of Sr(OH)2 = 10×0.01×2 = 0.2. HCl left = 0.8 meq in 20 mL: N = 0.8/20 = 0.04. pH = −log(4/100) = 2 − 0.6020 = 1.3979 ≈ 1.40.

Teacher's Note: Sr(OH)2 gives two OH- per formula unit; subtract meq.

Exam Note: Divide by total volume of 20 mL.

Question Objective 81. If heat of ionisation ΔiH° for HCN and CH3COOH are 45.2 kJ mol-1 and 2.1 kJ mol-1, then which one is not correct?
(a) pKaHCN > pKaCH3COOH
(b) Ka of HCN < Ka of CH3COOH
(c) acetic acid is stronger than HCN
(d) pKaHCN < pKaCH3COOH

Solution. Answer (from book): (d).
Lesser amount of energy is required for dissociation of acetic acid, so acetic acid is the stronger acid than HCN. Hence pKa(HCN) > pKa(CH3COOH), and statement (d) is not correct.

Teacher's Note: Smaller ionisation enthalpy goes with stronger acid.

Exam Note: Stronger acid has the smaller pKa.

Question Objective 82. The ratio of degree of dissociation of HCN (Ka = 10-9) in its 0.1 M and 0.001 M solution is:
(a) 0.1
(b) 0.2
(c) 0.3
(d) 0.4

Solution. Answer (from book): (a) 0.1.
α = √(Ka/C): α1/α2 = √(0.001/0.1) = 10-1 = 0.1.

Teacher's Note: Alpha varies inversely as the square root of concentration.

Exam Note: Dilution raises the degree of dissociation.

Question Objective 83. Which of the following ions can exist in solution?
(a) H3O+
(b) H3O2-
(c) H5O2+
(d) all of these

Solution. Answer (from book): (d) all of these.
H2O + H+ → H3O+; H3O+ + H2O → H5O2+; H2O + OH- → H3O2-.

Teacher's Note: Hydrated proton and hydroxide clusters exist through hydrogen bonding.

Exam Note: All three are hydrogen-bonded water clusters.

Question Objective 84. What will be degree of hydrolysis and pH respectively of an aqueous solution of ammonium formate: pKa = 4, pKb = 5, pKw = 14:
(a) 3.16×10-3, 7
(b) 4.16×10-3, 6.5
(c) 3.16×10-3, 6.5
(d) 4.16×10-3, 7.0

Solution. Answer (from book): (c) 3.16×10-3, 6.5.
h = √(Kw/(Ka·Kb)) = √(10-14/(10-5×10-4)) = √(10-5) = 3.16×10-3. pH = ½pKw + ½pKa − ½pKb = 14/2 + 4/2 − 5/2 = 6.5.

Teacher's Note: Weak acid with weak base: h and pH independent of concentration.

Exam Note: pH = 7 + (pKa - pKb)/2.

Question Objective 85. The solubility product of AgCl is 10-10. Applying Debye Huckel limiting law, the correct solubility order of AgCl is different solutions of 0.1 M concentration is:
(a) NaCl < H2O < NaNO3 < Ca(NO3)2
(b) H2O < NaCl < NaNO3 < Ca(NO3)2
(c) NaNO3 < Ca(NO3)2 < H2O < NaCl
(d) Ca(NO3)2 < NaNO3 < H2O < NaCl

Solution. Answer (from book): (a).
Solubility of AgCl in NaCl is lower than in H2O (common ion). Inert electrolytes increase solubility through ionic strength (Debye-Huckel), more so for Ca(NO3)2 (higher ionic strength) than NaNO3: NaCl < H2O < NaNO3 < Ca(NO3)2.

Teacher's Note: Common ion lowers solubility; inert salt raises it via ionic strength.

Exam Note: Higher ionic strength means higher solubility.

Question Objective 86. For Ag(CN)2- ⇌ Ag+ + 2CN-, Kc = 4×10-19 at 25°C. Calculate Ag+ concentration in a solution which is originally 0.1 M in KCN and 0.03 M in AgNO3:
(a) 7.5×10-18 M
(b) 7.5×10-15 M
(c) 6.2×10-15 M
(d) 3.4×10-15 M

Solution. Answer (from book): (a) 7.5×10-18 M.
AgNO3 + 2KCN → K[Ag(CN)2] + KNO3: 0.03 and 0.1 → 0, 0.04 (CN- left), 0.03 complex. Kc = [Ag+][CN-]2/[Ag(CN)2-] = [Ag+](0.04)2/0.03 = 4×10-19, so [Ag+] = 7.5×10-18 M.

Teacher's Note: Complex forms first, then its tiny dissociation fixes [Ag+].

Exam Note: Excess cyanide is 0.1 - 2 x 0.03 = 0.04 M.

Question Objective 87. The solubility product of PbI2 is 7.47×10-9 and 1.39×10-8 at 15°C and 25°C respectively. The molar heat of solution of PbI2 is:
(a) 9.969 kcal
(b) 10.66 kcal
(c) 8.88 kcal
(d) 11.11 kcal

Solution. Answer (from book): (b) 10.66 kcal.
2.303 log(Ksp2/Ksp1) = (ΔH/R)[(T2 − T1)/(T1T2)]: 2.303 log(1.39×10-8/7.47×10-9) = (ΔH/2)×[(298 − 288)/(288×298)] giving ΔH = 10.66 kcal mol-1 (R = 2 cal).

Teacher's Note: Van t Hoff with R = 2 cal and the two temperatures.

Exam Note: Enthalpy comes out in cal; convert to kcal.

Question Objective 88. A solution of a weak monobasic acid has ΛM for 0.1 N solution and Λ∞ equal to 60 S cm2 mol-1 and 400 S cm2 mol-1 respectively. The pH of this solution and Ka of acid is:
(a) 1.82, 2.65×10-3
(b) 2.82, 2.65×10-3
(c) 1.82, 2.25×10-3
(d) 2.82, 2.25×10-3

Solution. Answer (from book): (a) 1.82, 2.65×10-3.
α = Λm/Λ∞ = 60/400 = 0.15. [H+] = Cα = 0.1×3/20 = 0.015 M, pH = −log(3/200) = 1.8239. Ka = Cα2/(1 − α) = 0.1×(0.15)2/(1 − 0.15) = 2.65×10-3.

Teacher's Note: Conductance ratio gives alpha; then Ka = C alpha squared over (1 - alpha).

Exam Note: Keep the (1 - alpha) term when alpha is 0.15.

Question Objective 89. The dissociation constant of HA and A- are equal. The pH of 0.001 M HA solution is:
(a) 3
(b) 4
(c) 5
(d) 6

Solution. Answer (from book): (c) 5.
The acid HA and its conjugate base A- have equal constants, Ka = Kb: pKa + pKb = 14, so pKa = 7 and Ka = 10-7. [H+] = √(KaC) = √(10-7×0.001) = 10-5, pH = 5.

Teacher's Note: Equal Ka and Kb means each is 1e-7.

Exam Note: Then use the weak acid formula.

Question Objective 90. pKa of acetic acid is 4.74. What mass of KOH is required to be added in 500 mL of 1 M acid in order to prepare a buffer solution of maximum capacity?
(a) 28 g
(b) 14 g
(c) 7 g
(d) 10 g

Solution. Answer (from book): (b) 14 g.
Maximum buffer capacity at pH = pKa ± 1 is best when [conjugate base]/[acid] = 1. Millimoles of acetic acid = 500×1 = 500; millimoles to be neutralised = 250, so (w/56)×1000 = 250 and wKOH = 14 g.

Teacher's Note: Maximum capacity is at half neutralisation.

Exam Note: Neutralise exactly half the acid.

Question Objective 91. Ka of HCOOH is 10-5 and solubility of HCOOAg is 10-2 M. The solubility of HCOOAg in a buffer solution of pH = 3 is ............
(a) 0.01 M
(b) 0.1 M
(c) 0.2 M
(d) 0.02 M

Solution. Answer (from book): (b) 0.1 M.
Ksp of HCOOAg = S2 = (10-2)2 = 10-4. In the buffer [H+] = 10-3: [HCOO-] = Ka[HCOOH]/[H+] = 10-5×a/10-3 = a×10-2, where a = solubility (all dissolved formate = a = [HCOOH] + [HCOO-] ≈ [HCOOH]). Ksp = [HCOO-][Ag+]: 10-4 = a×10-2×a, so a = 0.1 M.

Teacher's Note: Acid medium protonates formate, so more salt dissolves.

Exam Note: Use Ka to relate free formate to total dissolved.

Question Objective 92. From the following information, select the strongest base. Acid: H2PO4-, HPO42-, HCO3-, HSO3-; Ka: 6.0×10-8, 4.8×10-13, 4.7×10-11, 6.3×10-8.
(a) PO43-
(b) HPO42-
(c) CO32-
(d) SO32-

Solution. Answer (from book): (a) PO43-.
Lesser the Ka, weaker is the acid (HPO42-, 4.8×10-13), so stronger is its conjugate base (PO43-).

Teacher's Note: Smallest Ka means strongest conjugate base.

Exam Note: Pair each acid with its conjugate base.

Question Objective 93. 0.125 mole of CaA2 are present in 0.5 litre solution. If Ka of HA is 8.0×10-4 and salt CaA2 is completely ionised, the pH of solution is:
(a) 5.60
(b) 5.75
(c) 8.40
(d) 8.25

Solution. Answer (from book): (c) 8.40.
[CaA2] = 0.125/0.5 = 0.25 M, so [A-] = 2×0.25 = 0.50 M. A- + H2O ⇌ HA + OH-: [OH-] = √(KwC/Ka) = √(10-14×0.5/(8×10-4)) = √(6.25×10-12) = 2.5×10-6, pOH = 5.60, pH = 14 − 5.60 = 8.40.

Teacher's Note: Anion concentration is twice the salt concentration; use hydrolysis of A-.

Exam Note: Answer is basic, above 7.

Question Objective 94. At what [Br-]/√[CO32-] the following cell shows equilibrium: Ag(s) | Ag2CO3(s), Na2CO3(aq.) || AgBr(aq.) | Ag(s). Ksp of Ag2CO3 = 8×10-12 and Ksp of AgBr = 4×10-13.
(a) 2×10-7
(b) √2×10-7
(c) √3×10-7
(d) 2

Solution. Answer (from book): (b) √2×10-7.
At equilibrium Ecell = 0, which requires [Ag+]RHS = [Ag+]LHS (Nernst). LHS: [Ag+]2[CO32-] = 8×10-12, so [Ag+] = √(8×10-12/[CO32-]) = 2√2×10-6/√[CO32-]. RHS: [Ag+] = 4×10-13/[Br-]. Equating: 4×10-13/[Br-] = 2√2×10-6/√[CO32-], so [Br-]/√[CO32-] = √2×10-7.

Teacher's Note: Concentration cell is at equilibrium when Ag+ is equal on both sides.

Exam Note: Express Ag+ through each Ksp, then equate.

Question Objective 95. Concentration of the Ag+ ions in a saturated solution of Ag2C2O4 is 2.2×10-4 mol L-1. Solubility product of Ag2C2O4 is:
(a) 2.42×10-8
(b) 2.66×10-12
(c) 4.5×10-11
(d) 5.3×10-12

Solution. Answer (from book): (d) 5.3×10-12.
Ag2C2O4(s) ⇌ 2Ag+ + C2O42- (2s, s). [Ag+] = 2s = 2.2×10-4, s = 1.1×10-4. Ksp = (2s)2·s = 4s3 = 4(1.1×10-4)3 = 5.3×10-12.

Teacher's Note: Silver is twice the solubility; Ksp = 4 s cubed.

Exam Note: Do not use [Ag+] as s.

Previous Years Problems

Question Previous Years Problem 1. The correct acidic strength order is: (IIT 2001)
(a) HClO < HClO2 < HClO3 < HClO4
(b) HClO4 < HClO3 < HClO2 < HClO
(c) HClO4 < HClO2 < HClO3 < HClO
(d) HClO4 < HClO3 < HClO < HClO2

Solution. Answer (from book): (a).
Higher is the oxidation number of central non-metal, more is acidic nature: HClO (+1) < HClO2 (+3) < HClO3 (+5) < HClO4 (+7).

Teacher's Note: Acidity of oxoacids rises with oxidation number of the central atom.

Exam Note: Order by oxidation state of chlorine.

Question Previous Years Problem 2. For a sparingly soluble salt ApBq, the relationship of its solubility product Ls with its solubility (S) is: (IIT 2001)
(a) LS = Sp+q·pp·qq
(b) LS = Sp+q·pq·qp
(c) LS = Spq·pp·qq
(d) LS = Spq·(p·q)p+q

Solution. Answer (from book): (a).
ApBq ⇌ pAq+ + qBp- (pS, qS): Ksp = (pS)p(qS)q = pp·qq·Sp+q.

Teacher's Note: Each ion concentration is coefficient times S, raised to its coefficient.

Exam Note: Powers of S add to p + q.

Question Previous Years Problem 3. The correct order of acidic strength is: (IIT 2002)
(a) CaO < CuO < H2O < CO2
(b) H2O < CuO < CaO < CO2
(c) CaO < H2O < CuO < CO2
(d) H2O < CO2 < CaO < CuO

Solution. Answer (from book): (a).
CaO is the strongest base, CO2 is acidic. Also CuO is strong base than H2O, so the acidic order is CaO < CuO < H2O < CO2.

Teacher's Note: Basic oxides of metals are least acidic; non-metal oxide CO2 is most acidic.

Exam Note: Place CaO first as the most basic.

Question Previous Years Problem 4. H3BO3 is: (IIT 2003)
(a) monobasic and weak Lewis acid
(b) monobasic and weak Bronsted acid
(c) monobasic and strong Lewis acid
(d) tribasic and weak Bronsted acid

Solution. Answer (from book): (a).
H3BO3 + OH- → B(OH)4- + H+: it accepts a lone pair of electrons from OH- (a weak Lewis acid), giving one H+, hence monobasic.

Teacher's Note: Boric acid accepts OH-, it does not donate its own proton.

Exam Note: Say monobasic through Lewis acidity.

Question Previous Years Problem 5. A solution which is 10-3 M each in Mn2+, Fe2+, Zn2+ and Hg2+ is treated with 10-16 M sulphide ion. If Ksp of MnS, FeS, ZnS and HgS are 10-15, 10-23, 10-20 and 10-45 respectively, which one will precipitate first? (IIT 2003)
(a) FeS
(b) MgS
(c) HgS
(d) ZnS

Solution. Answer (from book): (c) HgS.
Ksp of HgS is minimum and thus possesses less solubility; all the salts are of AB type. Ionic product = 10-3×10-16 = 10-19 exceeds Ksp of FeS, ZnS and HgS, and HgS needs the least sulphide, so it precipitates first.

Teacher's Note: Salt with the smallest Ksp needs the least sulphide to precipitate.

Exam Note: All are AB type, so Ksp comparison is valid.

Question Previous Years Problem 6. A weak-acid HX has the dissociation constant 1×10-5 M. It forms a salt NaX on reaction with alkali. The degree of hydrolysis of 0.1 M solution of NaX is: (IIT 2004)
(a) 0.0001%
(b) 0.01%
(c) 0.1%
(d) 0.15%

Solution. Answer (from book): (b) 0.01%.
h = √(KH/C) = √(Kw/(KaC)) = √(10-14/(10-5×0.1)) = √(10-8) = 10-4, i.e. h = 10-4×100 = 10-2 % = 0.01%.

Teacher's Note: Salt of weak acid: h = sqrt(Kw/(Ka C)).

Exam Note: Convert h to percent.

Question Previous Years Problem 7. 0.1 mole of CH3NH2 (Kb = 5×10-4) is mixed with 0.08 mole of HCl and diluted to one litre. The [H+] in solution is: (IIT 2005)
(a) 8×10-2 M
(b) 8×10-11 M
(c) 1.6×10-11 M
(d) 8×10-5 M

Solution. Answer (from book): (b) 8×10-11 M.
CH3NH2 + HCl → CH3NH3Cl: 0.1, 0.08 → 0.02, 0, 0.08, a basic buffer. [OH-] = Kb×[base]/[conjugate acid] = 5×10-4×0.02/0.08 = 1.25×10-4. [H+] = 10-14/1.25×10-4 = 8×10-11 M.

Teacher's Note: Basic buffer: [OH-] = Kb x base/salt, then use Kw.

Exam Note: The question asks [H+], not [OH-].

Question Previous Years Problem 8. The species present in solution when CO2 is dissolved in water: (IIT 2006)
(a) CO2, H2CO3, HCO3-, CO32-
(b) H2CO3, CO32-
(c) CO32-, HCO3-
(d) CO2, H2CO3

Solution. Answer (from book): (a).
All the following equilibria exist together: CO2 + H2O ⇌ H2CO3; H2CO3 ⇌ H+ + HCO3-; HCO3- ⇌ H+ + CO32-.

Teacher's Note: Dissolved CO2 sets up both ionisation steps of carbonic acid.

Exam Note: Include dissolved CO2 itself.

Question Previous Years Problem 9. 2.5 mL of (2/5) M weak monoacidic base (Kb = 1×10-12 at 25°C) is titrated with (2/15) M HCl in water at 25°C. The concentration of H+ at equivalence point is: (IIT 2008)
(a) 3.7×10-13 M
(b) 3.2×107 M
(c) 3.2×10-2 M
(d) 2.7×10-2 M

Solution. Answer (from book): (d) 2.7×10-2 M.
BOH + HCl → BCl + H2O. meq of BOH = meq of HCl = meq of BCl: 2.5×(2/5)×1 = V×(2/15)×1 = 1, so V = 7.5 mL; total volume = 10 mL and [BCl] = 1/10 = 0.1 M. Hydrolysis: KH = Ch2/(1 − h) = Kw/Kb = 10-2, so 0.1h2 = 10-2(1 − h) and h = 0.27. [H+] = Ch = 0.27×0.1 = 2.7×10-2 M.

Teacher's Note: Find salt concentration at equivalence, then solve for h without approximation since h is large.

Exam Note: Do not neglect h against 1 here.

Question Previous Years Problem 10. Solubility product Ksp of salt of type MX, MX2 and M3X at temperature T are 4.0×10-8, 3.2×10-14 and 2.7×10-15 respectively. Solubilities of these salts in mol dm-3 at temperature T are in the order: (IIT 2008)
(a) MX > MX2 > M3X
(b) M3X > MX2 > MX
(c) MX2 > M3X > MX
(d) MX > M3X > MX2

Solution. Answer (from book): (d) MX > M3X > MX2.
MX: S = √(4×10-8) = 2×10-4 M. MX2: S = ∛(Ksp/4) = ∛(3.2×10-14/4) = 2×10-5 M. M3X: S = ∜(Ksp/27) = ∜(2.7×10-15/27) = 1×10-4 M. Order: MX > M3X > MX2.

Teacher's Note: Different salt types cannot be ranked by Ksp; compute each solubility.

Exam Note: Use S = (Ksp/27)^(1/4) for M3X.

Question Previous Years Problem 11. The dissociation constant of a substituted benzoic acid at 25°C is 1.0×10-4. The pH of a 0.01 M solution of its sodium salt is: (IIT 2009)
(a) 10
(b) 8
(c) 12
(d) 6

Solution. Answer (from book): (b) 8.
C6H5COO- + H2O ⇌ C6H5COOH + OH-: [OH-] = ch = c√(KH/c) = √(Kwc/Ka) = √(10-14×0.01/10-4) = 10-6, so [H+] = 10-8 and pH = 8.

Teacher's Note: Sodium salt of a weak acid: [OH-] = sqrt(Kw c / Ka).

Exam Note: Convert [OH-] to pH.

Question Previous Years Problem 12. How many litres of water must be added to 1 litre of an aqueous solution of HCl with a pH of 1 to create an aqueous solution with pH of 2? [JEE (Main) 2013]
(a) 2.0 L
(b) 9.0 L
(c) 0.1 L
(d) 0.9 L

Solution. Answer (from book): (b) 9.0 L.
meq of I HCl = meq of II HCl: 1×10-1 = V×10-2, so V = 10 litre. Volume of water added = 10 − 1 = 9 L.

Teacher's Note: pH rise of one unit means tenfold dilution.

Exam Note: Subtract the original litre.

Question Previous Years Problem 13. The Ksp of Ag2CrO4 is 1.1×10-12 at 298 K. The solubility (in mol/L) of Ag2CrO4 in a 0.1 M AgNO3 solution is: [JEE (Advanced) I 2013]
(a) 1.1×10-11
(b) 1.1×10-10
(c) 1.1×10-12
(d) 1.1×10-9

Solution. Answer (from book): (b) 1.1×10-10.
Ionic product of Ag2CrO4 = [Ag+]2[CrO42-] = (2S + 0.1)2×S = 1.1×10-12. Neglecting 2S compared with 0.1: 0.01 S = 1.1×10-12, S = 1.1×10-10 mol/L.

Teacher's Note: Common ion Ag+ from AgNO3 dominates; neglect 2S.

Exam Note: Square the 0.1 M silver concentration.

Question Previous Years Problem 14. The initial rate of hydrolysis of methyl acetate (1 M) by a weak acid (HA, 1 M) is 1/100th of that of a strong acid (HX, 1 M), at 25°C. The Ka of HA is: [JEE (Advanced) II 2013]
(a) 1×10-4
(b) 1×10-5
(c) 1×10-6
(d) 1×10-3

Solution. Answer (from book): (a) 1×10-4.
Rate = k[Ester][H+]. For the strong acid [H+] = 1 M; for the weak acid [H+] = √(KaC). Rate1/Rate2 = [H+]1/[H+]2: 1/(1/100) = 1/√(Ka×1) (C = 1 M for weak acid), so Ka = 10-4.

Teacher's Note: Acid catalysed rate is proportional to [H+]; rate ratio equals [H+] ratio.

Exam Note: Weak acid [H+] = sqrt(Ka C) with C = 1 M.

Question Previous Years Problem 15. pKa of a weak acid (HA) and pKb of a weak base (BOH) are 3.2 and 3.4, respectively. The pH of their salt (AB) solution is: [JEE (Main) 2017]
(a) 7.2
(b) 6.9
(c) 7.0
(d) 1.0

Solution. Answer (from book): (b) 6.9.
pH = 7 + ½(pKa − pKb) = 7 + ½(3.2 − 3.4) = 6.9.

Teacher's Note: Salt of weak acid and weak base: pH = 7 + (pKa - pKb)/2.

Exam Note: Slightly acidic because the acid is slightly stronger.

Question Previous Years Problem 16. In the following reactions, ZnO is respectively acting as a/an: (1) ZnO + Na2O → Na2ZnO2 (2) ZnO + CO2 → ZnCO3 [JEE (Main) 2017]
(a) base and acid
(b) base and base
(c) acid and acid
(d) acid and base

Solution. Answer (from book): (d) acid and base.
In (1), Na2O is a basic oxide and thus ZnO acts as an acidic oxide. In (2), CO2 is an acidic oxide and thus ZnO acts as a basic oxide. ZnO is amphoteric.

Teacher's Note: Amphoteric oxide reacts as acid with a base and as base with an acid.

Exam Note: Identify the partner oxide in each reaction.

Objective Problems (More Than One Answer Correct)

Question More Than One Correct 1. Which one is not acidic salts?
(a) Na2HPO4
(b) NaH2PO2
(c) Na2HPO3
(d) NaH2PO4

Solution. Answer (from book): (b), (c).
H3PO2 is monobasic and H3PO3 is dibasic. So NaH2PO2 and Na2HPO3 have no replaceable hydrogen on a P-OH group and are normal salts, not acid salts.

Teacher's Note: Count ionisable P-OH hydrogens in the parent acid.

Exam Note: Basicity of oxyacids of phosphorus differs from H count.

Question More Than One Correct 2. The resulting mixtures which act as buffer are:
(a) 10 mL 0.1 M HCl + 20 mL 0.1 M NaCN
(b) 10 mL 0.1 M NaOH + 20 mL 0.1 M NH4CN
(c) 10 mL 0.1 M NH4OH + 20 mL 0.1 M CH3COONH4
(d) 10 mL 0.1 M CH3COOH + 20 mL 0.1 M CH3COONH4

Solution. Answer (from book): (a), (b), (c), (d).
(a) HCl + NaCN → NaCl + HCN: 1 mmol and 2 mmol → 0, 1, 1, 1: NaCN (1) with HCN (1) is a buffer. (b) NaOH converts part of NH4+ to NH3, leaving NH4+ and NH3 (and CN-/HCN), a buffer. (c) NH4OH with NH4+ (from the salt) is a buffer. (d) CH3COOH with CH3COO- is a buffer.

Teacher's Note: Each mixture contains a weak acid or base with its conjugate partner after reaction.

Exam Note: Do the mole table for (a) and (b).

Question More Than One Correct 3. Which one is correct for the saturated solution of Ca3(PO4)2 salt if its Ksp is 2.05×10-33?
(a) Solubility of Ca3(PO4)2 is 1.63×10-6 M
(b) [Ca2+]eq = 4.9×10-6 M
(c) [PO43-]eq = 3.26×10-6 M
(d) [Ca3(PO4)2]eq = zero

Solution. Answer (from book): Corrected: (d) only (book key: (a), (b), (c), (d)).
Ca3(PO4)2(s) ⇌ 3Ca2+ + 2PO43- (3s, 2s): Ksp = 108s5 = 2.05×10-33. Corrected: s = (2.05×10-33/108)1/5 = 1.14×10-7 M, [Ca2+] = 3s = 3.4×10-7 M, [PO43-] = 2s = 2.3×10-7 M. The book prints s = 1.63×10-6 M (and 4.9×10-6, 3.26×10-6); those values would give Ksp = 1.2×10-27, not 2.05×10-33. So options (a), (b), (c) are wrong. (d) is correct, since all the dissolved salt is present as ions, [Ca3(PO4)2]eq (undissociated) = 0.

Teacher's Note: Ksp = 108 s^5; take the fifth root carefully.

Exam Note: Check printed numbers by substituting back into Ksp.

Question More Than One Correct 4. Which of the following are correct?
(a) Aniline is a weak-acid in acetic acid
(b) Ammonium salts act as acid in liquid NH3
(c) The reaction CsF + LiI → CsI + LiF is acid-base reaction
(d) HCl acts as base in HF

Solution. Answer (from book): (b), (c), (d).
(a) is wrong: aniline is a strong base in acetic acid. (b) 2NH3 ⇌ NH4+ + NH2-, so NH4+ is the acid of this solvent system. (c) CsF + LiI → CsI + LiF is a soft acid-hard base and hard acid-soft base combination (soft-soft CsI, hard-hard LiF), an interesting acid-base reaction. (d) HF + HCl → F- + H2Cl+, HCl accepts a proton.

Teacher's Note: Acid and base behaviour depends on the solvent.

Exam Note: Name the solvent system for each statement.

Question More Than One Correct 5. Which of the following acid-base reactions are possible?
(a) PH3 + NH4+ → PH4+ + NH3
(b) NH3 + PH4+ → NH4+ + PH3
(c) (CH3)3P + NH4+ → (CH3)3P+H + NH3
(d) (CH3)3N + PH4+ → (CH3)3NH+ + PH3

Solution. Answer (from book): (b), (c).
Proton affinity of NH3 is greater than PH3, so (b) occurs and (a) does not. Proton affinity of (CH3)3P is greater than NH3, so (c) occurs. (d) is not given as possible in the key.

Teacher's Note: The stronger base takes the proton from the weaker one.

Exam Note: Compare proton affinities.

Question More Than One Correct 6. Select the correct statements:
(a) All Bronsted bases are Lewis bases
(b) All Bronsted acids are Lewis acids
(c) All Arrhenius acids are Bronsted acids
(d) All Arrhenius bases are Bronsted bases

Solution. Answer (from book): (a), (c).
NaOH is an Arrhenius base but not a Bronsted base; HCl is a Bronsted acid but not a Lewis acid. So (b) and (d) are wrong.

Teacher's Note: Check each definition against a counterexample.

Exam Note: Lewis acids need an empty orbital; HCl has none.

Question More Than One Correct 7. The correct acidic orders are:
(a) Li+ > Na+ > K+
(b) Li+ < Be2+ < B3+
(c) Fe3+ > Fe2+ > Fe+
(d) NF3 < NCl3 < NBr3

Solution. Answer (from book): (a), (b), (c), (d).
Higher is the effective nuclear charge on the cation, the more acidic it is (a, b, c). The increasing electronegativity of the halogen from I to F in NX3 gives a lesser tendency for N to donate its electron pair as it acquires a more positive charge on N-atom (so the acidic character order NF3 < NCl3 < NBr3 is correct).

Teacher's Note: Higher charge to size ratio of the cation means greater acidity.

Exam Note: All four orders follow the same rule.

Question More Than One Correct 8. Select the correct statements:
(a) HCN is weak acid
(b) Reaction of HCl(g) and NH3(l) is Arrhenius acid-base reaction
(c) Pure H2SO4 and HClO4 do not conduct current but in presence of each other they are good conductor
(d) Mn2O7 is acidic oxide

Solution. Answer (from book): (a), (b), (c), (d).
Arrhenius concept is in aqueous medium. HClO4 + H2SO4 → H3SO4+ + ClO4- (ions form, so the mixture conducts). Mn2O7 + H2O → 2HMnO4 (acid).

Teacher's Note: Acid behaviour of an oxide shows in what it forms with water.

Exam Note: Check each statement separately.

Question More Than One Correct 9. The oxo acids of P2O5 are:
(a) H3PO4
(b) H4P2O7
(c) HPO3
(d) H3PO3

Solution. Answer (from book): (a), (b), (c).
Each of H3PO4, H4P2O7 and HPO3 has P in the +5 state, as in P2O5. H3PO3 has P3+.

Teacher's Note: Acids derived from P2O5 keep phosphorus at +5.

Exam Note: Check the oxidation state of P.

Question More Than One Correct 10. Which of the following statement(s) is (are) correct?
(a) pH of 10×10-18 M solution of HCl is 8
(b) The conjugate base of H2PO4- is HPO42-
(c) Autoprotolysis constant of water increases with temperature
(d) When a solution of a weak monoprotic acid is titrated against a strong base, at half-neutralisation point pH = (1/2) pKa

Solution. Answer (from book): (b), (c).
(a) is wrong: HCl is an acid, so the solution cannot have pH 8 (it is about 7). (b) is correct. (c) Kw increases with temperature. (d) is wrong: at half-neutralisation pH = pKa.

Teacher's Note: Very dilute acid gives pH just below 7, never above.

Exam Note: Half-neutralisation gives pH = pKa, not half of it.

Question More Than One Correct 11. A buffer solution can be prepared from a mixture of:
(a) sodium acetate and acetic acid in water
(b) sodium acetate and hydrochloric acid in water
(c) ammonia and ammonium chloride in water
(d) ammonia and sodium hydroxide in water

Solution. Answer (from book): (a), (b), (c).
For CH3COONa + HCl → CH3COOH + NaCl, with more acetate than HCl, acetic acid and acetate remain (buffer). (a) and (c) are direct acid/base-salt pairs. (d) has a strong base with a weak base, which is not a buffer.

Teacher's Note: Partial neutralisation of a weak acid salt creates the acid-salt pair.

Exam Note: Strong base plus weak base cannot buffer.

Question More Than One Correct 12. In a buffer solution of NaH2PO4 and Na2HPO4:
(a) NaH2PO4 is acid and Na2HPO4 is salt
(b) pH = pK2 of H3PO4 + log[HPO42-]/[H2PO4-]
(c) Na2HPO4 is acid and NaH2PO4 is salt
(d) pH = pK3 of H3PO4 + log[H2PO4-]/[HPO42-]

Solution. Answer (from book): (a), (b).
HPO42- is the conjugate base of H2PO4-, so NaH2PO4 acts as the acid and Na2HPO4 as its salt, with pH = pKa2 + log [HPO42-]/[H2PO4-].

Teacher's Note: The pair H2PO4-/HPO4 2- is governed by the second dissociation constant.

Exam Note: Salt over acid inside the log.

Question More Than One Correct 13. Select the correct statements:
(a) The Ka1 value for H2SO3 is 1.3×10-2
(b) H2SO3 exists in only minute concentration in aqueous solution of SO2
(c) The Ka1 value of H2SO3 refers for the process H2SO3 ⇌ H+ + SO32-
(d) The Ka1 value of H2SO3 refers for the process SO2(g) + H2O(l) ⇌ H+(aq) + HSO3-(aq)

Solution. Answer (from book): (a), (b), (d).
(a), (b) and (d) are facts: in aqueous SO2 the species is mostly hydrated SO2, so the Ka1 value of 1.3×10-2 refers to SO2 + H2O ⇌ H+ + HSO3-. (c) is wrong: that process is the overall two-step ionisation, not Ka1.

Teacher's Note: Sulphurous acid exists only in minute concentration, so K is quoted for SO2 + H2O.

Exam Note: K1 is the first proton only.

Question More Than One Correct 14. Select the correct statements:
(a) HF is a weak acid
(b) The strength of weak acids increases with dilution (HA ⇌ H+ + A-)
(c) The strength of HF increases with concentration (HF ⇌ H+ + F-)
(d) The F- furnished by HF reacts with HF to give HF2- and thereby shifting the reaction to right

Solution. Answer (from book): (a), (b), (d).
All are facts except (c): the degree of dissociation (strength) of weak acids increases with dilution, and for HF the formation of HF2- (F- + HF → HF2-) shifts the ionisation to the right at higher concentration, explaining the unusual behaviour in aqueous medium.

Teacher's Note: Weak acid ionises more on dilution; HF is special due to HF2- formation.

Exam Note: Choice (d) explains the HF anomaly.

Question More Than One Correct 15. An aqueous solution of HNO3, KOH, CH3COOH and CH3COONa of identical concentrations are provided. The pairs of solution which form a buffer upon mixing is/are: (IIT 2010)
(a) HNO3 and CH3COOH
(b) KOH and CH3COONa
(c) HNO3 and CH3COONa
(d) CH3COOH and CH3COONa

Solution. Answer (from book): (c), (d).
CH3COONa (in more amount) than HNO3 forms a buffer mixture of (CH3COONa + CH3COOH) in solution: HNO3 + CH3COONa → CH3COOH + NaNO3. (d) is the usual acid and salt pair.

Teacher's Note: Strong acid added to excess acetate makes acetic acid in place.

Exam Note: Identical concentrations: the volumes decide the buffer.

Question More Than One Correct 16. The correct statement(s) for orthoboric acid is/are: [JEE (Advanced) 2014]
(a) It behaves as a weak acid in water due to self ionization
(b) Acidity of its aqueous solution increases upon addition of ethylene glycol
(c) It has a three dimensional structure due to hydrogen bonding
(d) It is a weak electrolyte in water

Solution. Answer (from book): (b), (d).
Orthoboric acid H3BO3 is a weak monobasic Lewis acid as it accepts OH- ions: H3BO3 + H2O ⇌ B(OH)4- + H+. The equilibrium is shifted forward by addition of ethylene glycol (a syndiol), which forms a stable chelate complex with B(OH)4- (book figure shows the borate ester chelate and 4H2O). It has a planar sheet-like structure due to sp2 hybridisation of B as well as hydrogen bonding, not a three-dimensional one.

Teacher's Note: Diol chelation removes borate and lets more boric acid ionise.

Exam Note: Boric acid is a Lewis acid, not a self-ionising Bronsted acid.

Comprehension Based Problems

Comprehension 1: Solubility of a substance in its saturated solution can be derived from Ksp values. Higher is the Ksp for same type of compound more is the solubility. If S is the solubility in mol/litre then Ksp of a compound AxBy is expressed as Ksp = xx·yy[S]x+y. Consider a compound M(OH)x having Ksp = 27×10-12 and solubility in pure water is 10-3 mol litre-1.

Question Comprehension 1, Part 1. The value of x is:
(a) 1
(b) 2
(c) 3
(d) 4

Solution. Answer (from book): (c) 3.
M(OH)x ⇌ M+x + xOH- (S, xS): Ksp = xx·S1+x = 27×10-12 with S = 10-3, giving x = 3.

Teacher's Note: Substitute S = 1e-3 and try x = 1, 2, 3.

Exam Note: Only x = 3 gives 27e-12.

Question Comprehension 1, Part 2. The solubility (in M) of M(OH)x in 0.1 M NaOH solution is:
(a) 2.7×10-10
(b) 2.7×10-3
(c) 2.7×10-8
(d) 2.7×10-4

Solution. Answer (from book): (c) 2.7×10-8.
Ksp = [M3+][OH-]3 = S×[3S + 0.1]3 with 3S ≪ 0.1: 27×10-12 = S(0.1)3, so S = 27×10-12/10-3 = 2.7×10-8 M.

Teacher's Note: Common OH- from NaOH dominates; neglect 3S.

Exam Note: Cube the 0.1 M hydroxide.

Question Comprehension 1, Part 3. The solubility (in M) of M(OH)x in 0.1 M Ca(OH)2 solution is:
(a) 6.46×10-4
(b) 2.7×10-8
(c) 2.7×10-4
(d) 3.375×10-9

Solution. Answer (from book): (d) 3.375×10-9.
0.1 M Ca(OH)2 gives [OH-] = 0.2 M. Ksp = S[3S + 0.2]3 ≈ S(0.2)3 = 27×10-12, so S = 27×10-12/(0.2)3 = 3.375×10-9 M.

Teacher's Note: Calcium hydroxide supplies two OH- per formula unit.

Exam Note: Use 0.2 M, not 0.1 M, for hydroxide.

Question Comprehension 1, Part 4. The solubility (in mole/litre) of M(OH)x in 0.1 M M(NO3)x solution is:
(a) 2.15×10-4
(b) 2.15×10-5
(c) 2.15×10-6
(d) 2.15×10-7

Solution. Answer (from book): (a) 2.15×10-4.
Ksp = [M3+][OH-]3 = [S + 0.1][3S]3 ≈ 0.1×27S3 (S ≪ 0.1). So 27S3 = 27×10-12/0.1, giving S = 2.15×10-4 M.

Teacher's Note: Common cation M3+ is 0.1 M; hydroxide equals 3S.

Exam Note: Take the cube root at the end.

Comprehension 2: Kb of CH3COO- is 5.26×10-10. Calculate for 0.01 N solution of sodium acetate.

Question Comprehension 2, Part 1. Hydrolysis constant of CH3COO- is:
(a) 5.26×10-10
(b) 5.26×10-11
(c) 5.26×10-12
(d) 5.26×10-9

Solution. Answer (from book): (a) 5.26×10-10.
CH3COONa + H2O ⇌ CH3COOH + NaOH. KH = Kw/Ka = 10-14/1.9×10-5 = 5.26×10-10 (equal to Kb of acetate).

Teacher's Note: Hydrolysis constant of the anion equals its Kb.

Exam Note: Kh = Kw/Ka.

Question Comprehension 2, Part 2. Degree of hydrolysis of CH3COO- is:
(a) 2.29×10-6
(b) 2.29×10-4
(c) 2.29×10-3
(d) 2.29×10-5

Solution. Answer (from book): (b) 2.29×10-4.
h = √(KH/C) = √(5.26×10-10/0.01) = 2.29×10-4.

Teacher's Note: Degree of hydrolysis is sqrt(Kh/C).

Exam Note: Use C = 0.01 M.

Question Comprehension 2, Part 3. pH of solution is:
(a) 8.56
(b) 5.44
(c) 8.36
(d) 9.56

Solution. Answer (from book): (c) 8.36.
[OH-] = Ch = 0.01×2.29×10-4 = 2.29×10-6 M, pOH = 5.64, so pH = 8.36.

Teacher's Note: Hydroxide is C times h; then pH = 14 - pOH.

Exam Note: Salt of weak acid is basic.

Comprehension 3: Oxides of metals are usually basic and oxides of non metals are usually acidic. However some acidic oxides of metals and neutral oxides of non metals such as N2O, NO, CO, H2O are known.

Question Comprehension 3, Part 1. Which of the following oxide is acidic?
(a) Cr2O3
(b) CrO3
(c) MnO2
(d) MnO

Solution. Answer (from book): (b) CrO3.
Some metal oxides in their highest oxidation state are acidic: CrO3 (Cr in +6).

Teacher's Note: Metal oxides turn acidic at high oxidation states.

Exam Note: Compare oxidation states of the metal.

Question Comprehension 3, Part 2. In the reaction of CO with NaOH at high P and T to give sodium formate, CO acts as:
(a) acid
(b) base
(c) neutral
(d) amphoteric

Solution. Answer (from book): (a) acid.
CO + NaOH → HCOONa (at high P and T): CO acts as the acid and NaOH as the base, forming the salt HCOONa.

Teacher's Note: Neutral oxide can still show acidic behaviour with a strong base.

Exam Note: CO here reacts as an acid anhydride of formic acid.

Question Comprehension 3, Part 3. Number of OH group present in H3PO2 are:
(a) 1
(b) 2
(c) 3
(d) none of these

Solution. Answer (from book): (a) 1.
H3PO2 is H2P(=O)(OH): HO-P(=O) with two H atoms directly bonded to P, so only one OH group is present (monobasic).

Teacher's Note: Hypophosphorous acid has two P-H bonds and one P-OH.

Exam Note: Only P-OH hydrogen is acidic.

Comprehension 4: The dissolution of ammonia gas in water does not obey Henry's law. On dissolving, a major portion of ammonia, molecules unite with H2O to form NH4OH molecules. NH4OH again dissociates into NH4+ and OH- ions. In solution therefore, we have NH3 molecules, NH4OH molecules and NH4+ ions and the following equilibrium exist: NH3(g) (pressure P and concentration C) initially ⇌ NH3(l) + H2O ⇌ NH4OH ⇌ NH4+ + OH-. Let C1 mol/L of NH3 pass in solution state a part of which on dissolution in water forms C2 mol/L of NH4OH. The solution contains C3 mol/L of NH4+ ions.

Question Comprehension 4, Part 1. Total concentration of ammonia, which can be determined by volumetric analysis is equal to:
(a) C1 + C2 + C3
(b) C1 + C2
(c) C1 + C3
(d) C2 + C3

Solution. Answer (from book): (b) C1 + C2.
The intermediate solution of acid will react with all the NH3 present in solution, so the total ammonia is C1 (as NH3) + C2 (as NH4OH, which includes the NH4+ that came from it).

Teacher's Note: Titration counts every form of ammonia, but NH4+ comes from NH4OH.

Exam Note: Do not add C3 again.

Question Comprehension 4, Part 2. Concentration of undissociated ammonium hydroxide is:
(a) C1 + C2
(b) C2 − C3
(c) C1 + C3
(d) C1 − C2

Solution. Answer (from book): (b) C2 − C3.
NH4OH left undissociated = C2 − C3.

Teacher's Note: C3 of the C2 formed has ionised.

Exam Note: Subtract ionised from formed.

Question Comprehension 4, Part 3. Degree of dissociation of ammonium hydroxide is:
(a) C1
(b) C3/C1
(c) C3/C
(d) C3/C2

Solution. Answer (from book): (d) C3/C2.
α = moles of NH4OH dissociated/total moles of NH4OH = C3/C2.

Teacher's Note: Alpha is dissociated over total NH4OH present.

Exam Note: Use C2, not C1, as denominator.

Question Comprehension 4, Part 4. If p is the partial pressure of ammonia at equilibrium, then which of the following is constant? α is degree of dissociation of NH3.
(a) p/C1
(b) p/C
(c) p/C2
(d) p/C3

Solution. Answer (from book): (a) p/C1.
According to Henry's law, the amount of gas dissolved per unit volume of solvent is proportional to its pressure: CNH3 ∝ PNH3, so K = PNH3/CNH3 = p/C1 is constant (only the unreacted dissolved NH3, C1, obeys the law).

Teacher's Note: Henry law holds for the physically dissolved gas only.

Exam Note: Use the NH3 molecule concentration C1.

Question Comprehension 4, Part 5. The dissociation constant of NH4OH can be given as:
(a) Kb = (C3)2/(C2 − C3)
(b) Kb = (C3)2/C2
(c) Kb = C3/(C2 − C3)
(d) Kb = C3/(C1 − C2)

Solution. Answer (from book): (a).
NH4OH ⇌ NH4+ + OH-: C2 − C3, C3, C3. So Kb = C32/(C2 − C3).

Teacher's Note: Use equilibrium concentrations of NH4+, OH- and undissociated NH4OH.

Exam Note: NH4+ and OH- both equal C3.

Question Comprehension 4, Part 6. The pH of solution can be given by:
(a) pKw + log C3
(b) pKw − ½pKb + ½log C2
(c) pKa + ½log C2 + ½pKb
(d) either of these

Solution. Answer (from book): (d) either of these.
[OH-] = C3, so pOH = −log C3 and pH = pKw − pOH = pKw + log C3 (option a). Also [OH-] = C2α = C2√(Kb/C2) = √(KbC2), so pOH = ½pKb − ½log C2 and pH = pKw − ½pKb + ½log C2 (option b). With pKa = pKw − pKb, option (c) equals option (b), so all are valid.

Teacher's Note: pH can be written from [OH-] directly or via Kb and C2.

Exam Note: Use pKa + pKb = pKw to match option (c).

Comprehension 5: The pH of pure water at 25°C and 60°C are 7 and 6.5 respectively. HCl gas is passed through water at 25°C till the resulting 1 litre solution acquires a pH of 3. Now 4×10-3 mole of NaCN are added into this solution. Also a fresh 0.1 M HCN solution has pH 5.1936. Now in the one part of solution obtained after addition of NaCN, one millimole of NaOH are added and in the second part of this solution 0.5 millimole of HCl are added.

Question Comprehension 5, Part 1. The heat of formation of water from H+ and OH- is:
(a) 13.06 kcal
(b) −13.06 kcal
(c) 16.32 kcal
(d) −16.32 kcal

Solution. Answer (from book): (b) −13.06 kcal.
At 25°C pH = 7, Kw = 10-14; at 60°C pH = 6.5, Kw = 10-13. For H2O ⇌ H+ + OH-: 2.303 log(10-13/10-14) = (ΔH/R)[35/(333×298)], giving ΔH = 13.06 kcal for ionisation. So H+ + OH- → H2O has ΔH = −13.06 kcal.

Teacher's Note: Ionisation of water is endothermic; formation from ions is exothermic.

Exam Note: Take the reverse process for the sign.

Question Comprehension 5, Part 2. The volume of HCl passed through the solution at 25°C and 1 atm is:
(a) 24.46 mL
(b) 2.446 mL
(c) 244.6 mL
(d) 0.2446 mL

Solution. Answer (from book): (a) 24.46 mL.
pH of solution after passage of HCl = 3, so [H+] = 10-3 M, i.e. [HCl] = 10-3 mol in 1 L. From PV = nRT: 1×V = 10-3×0.0821×298, so V = 0.02446 L = 24.46 mL.

Teacher's Note: Moles of HCl equal moles of H+ in 1 L.

Exam Note: Use the ideal gas equation at 298 K.

Question Comprehension 5, Part 3. The dissociation constant of HCN is:
(a) 4.1×10-10
(b) 4.1×10-6
(c) 4.1×10-3
(d) 4.1×10-8

Solution. Answer (from book): (a) 4.1×10-10.
[H+] = Cα = C√(Ka/C) = √(KaC), so −log[H+] = −½[log Ka + log C]: 5.1936 = −½[log Ka + log 0.1], giving Ka = 4.1×10-10.

Teacher's Note: Weak acid pH formula rearranged for Ka.

Exam Note: Substitute pH 5.1936 and C = 0.1 M.

Question Comprehension 5, Part 4. The degree of dissociation of 0.1 M HCN solution is:
(a) 6.4×10-5
(b) 6.4×10-3
(c) 6.4×10-2
(d) 6.4×10-6

Solution. Answer (from book): (a) 6.4×10-5.
Ka = Cα2: 4.1×10-10 = 0.1×α2, so α = 6.4×10-5.

Teacher's Note: Weak acid: Ka = C alpha squared.

Exam Note: Take square root of 4.1e-9.

Question Comprehension 5, Part 5. The pH of resulting solution after addition of NaCN is:
(a) 9.86
(b) 8.86
(c) 6.86
(d) 5.86

Solution. Answer (from book): (a) 9.86.
HCl + NaCN → NaCl + HCN: 10-3 and 4×10-3 mol → 0, 0.003, 0.001, 0.001. A buffer: pH = pKa + log([conj. base]/[acid]) = 9.3872 + log(0.003/0.001) = 9.8643.

Teacher's Note: HCl converts one quarter of the cyanide into HCN, leaving a buffer.

Exam Note: Use pKa = 9.3872 from Ka 4.1e-10.

Question Comprehension 5, Part 6. The pH of resulting solution after addition of 0.1 millimole of HCl is:
(a) 9.68
(b) 9.39
(c) 9.21
(d) 9.98

Solution. Answer (from book): (b) 9.39.
Book working (uses 1 millimole of H+ = 0.001 mol added to the buffer): H+ + NaCN → HCN: 0.001, 0.003 → 0.001 (formed), 0.002 left; HCN becomes 0.002. pH = 9.3872 + log(0.002/0.002) = 9.3872 ≈ 9.39. Note: the printed question text says 0.1 millimole (the passage says 0.5 millimole) but the printed working and the answer correspond to 1 millimole; needs a human check.

Teacher's Note: Added strong acid shifts the buffer ratio by converting CN- to HCN.

Exam Note: Update both HCN and NaCN after addition.

Question Comprehension 5, Part 7. The pH of resulting solution after addition of 0.05 millimole of NaOH is:
(a) 10.23
(b) 11.23
(c) 9.23
(d) 8.23

Solution. Answer (from book): (a) 10.23.
Book working (uses 0.5 millimole = 0.0005 mol NaOH): NaOH + HCN → NaCN: 0.0005, 0.001 → 0, 0.0005 HCN left, NaCN = 0.003 + 0.0005 = 0.0035. pH = 9.3872 + log(0.0035/0.0005) = 9.3872 + 0.8451 = 10.2323. Note: the printed question text says 0.05 millimole (the passage says 1 millimole) while the working uses 0.5 millimole; needs a human check.

Teacher's Note: Added base converts HCN to CN-, raising the salt to acid ratio.

Exam Note: Update both HCN and NaCN after addition.

Statement Explanation Problems

In each sub question given below a statement S and explanation E is given. Choose the correct answers from the codes a, b, c and d given for each question: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Question Statement-Explanation 1. S: The pH of a basic buffer mixture is given by: pH = pKa + log [base]/[conjugate acid].
E: The pH of an acidic buffer mixture is given by: pH = pKa + log [conjugate base]/[acid].
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (d).
For a basic buffer pOH = pKb + log [conjugate acid]/[base], so pH = pKw − pOH. Both statements are correct but E does not explain S.

Teacher's Note: Both are Henderson forms; they are separate relations.

Exam Note: Neither explains the other.

Question Statement-Explanation 2. S: On passing HCl(g) through a saturated solution of BaCl2, a white turbidity appears.
E: The common ion effect is responsible for white turbidity.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
Book key: this is not the common ion effect (at least one should be a weak electrolyte); here the product of ionic concentration exceeds Ksp of BaCl2. Note: many other texts do call this the common ion effect; the key follows the book's definition.

Teacher's Note: Turbidity is precipitation once the ionic product exceeds Ksp.

Exam Note: Follow the book key; flag the definition used.

Question Statement-Explanation 3. S: Degree of hydrolysis and pH of a salt say NH4CN is independent of concentration of NH4CN.
E: The solution of NH4CN in water has pH slightly greater than 7.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (d).
Both are correct; the reason for E is that NH4OH is relatively stronger (than HCN is acid), but it does not explain S.

Teacher's Note: Weak-weak salts have h and pH independent of concentration.

Exam Note: pH comes from the pKa and pKb difference, not from concentration.

Question Statement-Explanation 4. S: In a pair of two electrolytes one having higher value of Ksp is more soluble in water than the other having lower value of Ksp.
E: Solubility of electrolyte depends upon Ksp as well as on the nature of electrolyte.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (b).
Ksp = pp·qq·s(p+q) for ApBq: solubility depends on the type of salt as well as Ksp, so S is wrong and E is correct.

Teacher's Note: Ksp comparison works only for salts of the same type.

Exam Note: Compare solubilities, not Ksp values, across types.

Question Statement-Explanation 5. S: HgCl2 and SnCl2 cannot coexist in a solution.
E: Increase in concentration of Cl- in solution brings in precipitation of either of them.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
SnCl2 + 2HgCl2 → SnCl4 + Hg2Cl2↓; Hg2Cl2 + SnCl2 → SnCl4 + 2Hg↓. This is a redox change, so S is correct and E is wrong.

Teacher's Note: Sn(II) reduces Hg(II); precipitation is a redox product.

Exam Note: The cause is redox, not chloride concentration.

Question Statement-Explanation 6. S: The solubility of HgI2 in water decreases in presence of KI.
E: HgI2 is insoluble in water but it becomes soluble in KI(aq).
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (b).
HgI2 forms a soluble complex with KI: 2KI + HgI2 → K2HgI4. So S is wrong and E is correct.

Teacher's Note: Iodide complexes mercury, raising solubility.

Exam Note: Complex formation beats the common ion effect here.

Question Statement-Explanation 7. S: The pH of NH4OH(aq) decreases on addition of little NH4Cl in it.
E: The pH of NH4Cl brings in decrease in degree of dissociation of NH4OH due to common ion effect.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement: NH4+ suppresses ionisation of NH4OH, lowering [OH-] and the pH.

Teacher's Note: Common NH4+ ion suppresses ammonia ionisation.

Exam Note: Lower [OH-] means lower pH.

Question Statement-Explanation 8. S: The [H+] in 10-8 N HCl is 1.05×10-7 M.
E: The H+ is obtained from HCl and H2O; the later furnishes less H+ than 10-7 due to common ion effect.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement (water gives about 9.5×10-8 M and HCl 10-8 M, total 1.05×10-7 M).

Teacher's Note: Both HCl and water contribute at this dilution.

Exam Note: Added H+ suppresses water ionisation below 1e-7.

Question Statement-Explanation 9. S: HCl acts as weak base in liquid HF but weak acid in acetic acid.
E: The tendency to act as acid or base also depends upon the nature of other substance to accept or donate a proton.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement: the solvent decides whether HCl donates or accepts a proton.

Teacher's Note: Acid-base behaviour is relative to the solvent.

Exam Note: Name the solvent for each case.

Question Statement-Explanation 10. S: Cu+, Ag+ are soft acids whereas CN-, H- are soft bases.
E: Soft acids do not possess noble gas configuration whereas soft bases have donor atom of easily polarised nature.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement.

Teacher's Note: Soft acids are large, polarisable, pseudo-noble-gas cations; soft bases are polarisable.

Exam Note: Link softness to polarisability.

Question Statement-Explanation 11. S: Metal oxides are usually either acidic or amphoteric (as printed) but Mn2O7 is acidic.
E: On dissolution in water, Mn2O7 forms per manganic acid.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement: Mn2O7 + H2O → 2HMnO4. (The statement is printed as shown in the book; metal oxides are usually basic.)

Teacher's Note: High oxidation state metal oxide forms an acid with water.

Exam Note: Show the product HMnO4.

Question Statement-Explanation 12. S: The dissociation constants of polyprotic acid are in the order K1 > K2 > K3.
E: The [H+] furnished in first step of dissociation exerts common ion effect to reduce the second dissociation so on.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement.

Teacher's Note: Each step produces H+ that suppresses the next.

Exam Note: Also the anion holds H+ more strongly.

Question Statement-Explanation 13. S: All strong acid in water show almost same acidic nature.
E: This is due to levelling effect of water on account of its high dielectric constant and strong proton accepting tendency.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement.

Teacher's Note: Water levels all strong acids to H3O+.

Exam Note: Name the levelling effect.

Question Statement-Explanation 14. S: CCl4, C6H6 and liquid SO2 are aprotic solvents.
E: Aprotic solvents do not influence the acidic or basic nature of solute.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement.

Teacher's Note: Aprotic solvents cannot donate or accept protons.

Exam Note: They do not take part in proton transfer.

Question Statement-Explanation 15. S: The acidic nature of some cations is: Al3+ > Be2+ > Na+ > K+.
E: More is the effective nuclear charge on cation more is its acidic nature.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement.

Teacher's Note: Higher charge-to-size ratio means stronger polarisation of water.

Exam Note: Order follows effective nuclear charge.

Question Statement-Explanation 16. S: Acidic nature of boron trihalides is in the order: BF3 < BCl3 < BBr3 < BI3.
E: Basic nature of nitrogen trihalides is in the order: NF3 > NCl3 > NBr3 > NI3.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
S is correct due to back bonding in boron. In nitrogen halides the order is NF3 < NCl3 < NBr3 < NI3: on account of electronegativity of halogens, in NF3 the lone pair is not released easily, due to more positive charge on N. So E is wrong.

Teacher's Note: Back-bonding weakens BF3 acidity; electronegative F weakens NF3 basicity.

Exam Note: Basicity order of NX3 is the reverse of E.

Question Statement-Explanation 17. S: CO + NaOH → HCOONa (high P, high T).
E: CO although being neutral can act as acid in the given reaction.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
CO is the acid, NaOH is the base and the salt formed is HCOONa. Explanation is the correct reason.

Teacher's Note: Neutral oxide shows acidic behaviour under forcing conditions.

Exam Note: Salt formation proves the acid behaviour.

Question Statement-Explanation 18. S: The dissociation constant of water at 60°C is 10-13.
E: The pH of water is 6.5 at 60°C and that it behaves as acid at 60°C.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
Kw = 10-13 at 60°C, so pH = 6.5; but water is neutral because the pH scale contracts to 0 to 13. S is correct and E is wrong.

Teacher's Note: Neutral water has [H+] = [OH-] at all temperatures.

Exam Note: pH below 7 does not mean acidic at 60 C.

Question Statement-Explanation 19. S: Salting out action of sodium soap in presence of NaCl is based on common ion effect.
E: Salting out action of soap is based on the fact that as the concentration of Na+ increases, the RCOONa shows precipitation because [RCOO-][Na+] > Ksp.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (b).
RCOONa → RCOO- + Na+; in presence of NaCl, [Na+] increases and [RCOO-][Na+] exceeds Ksp of RCOONa. The book treats E as correct and S as wrong.

Teacher's Note: Precipitation occurs when the ionic product exceeds Ksp.

Exam Note: Key marks the common ion explanation S as wrong.

Question Statement-Explanation 20. S: Hydrolysis of salt is an exothermic phenomenon.
E: It involves breaking up of water molecule of produce acid and base respectively.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (b).
Breaking up of bonds is endothermic, so hydrolysis is endothermic: S is wrong and E is correct.

Teacher's Note: Hydrolysis breaks O-H bonds, which absorbs energy.

Exam Note: Opposite of neutralisation, which is exothermic.

Question Statement-Explanation 21. S: 0.1 M NaCN + 0.05 M HCl solution on mixing in equal volume form a buffer solution.
E: The solution after mixing contains a weak acid and its conjugate base and thus act as buffer.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
NaCN + HCl → NaCl + HCN: 0.1, 0.05 → 0.05, 0, 0.05. The solution contains a weak acid HCN and its conjugate base CN-, so it acts as a buffer. Explanation is correct.

Teacher's Note: Half the cyanide converts to HCN, giving 1:1 buffer.

Exam Note: Equal volumes halve concentrations but keep the ratio.

Question Statement-Explanation 22. S: The pH of NH4OH remains unchanged on addition of NH4Cl.
E: Addition of NH4Cl suppresses the dissociation of NH4OH due to common ion effect.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (b).
The dissociation of NH4OH is suppressed in presence of NH4Cl and thus the pH of NH4OH decreases. S is wrong, E is correct.

Teacher's Note: Common NH4+ lowers [OH-], so pH falls.

Exam Note: Pairs with Statement-Explanation 7.

Question Statement-Explanation 23. S: Heat given out during neutralisation of NaOH and HF is −13.7 kcal/eq.
E: F- ion is more easily hydrated and thus heat of neutralisation of HF and NaOH is more.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (b).
Heat given out during complete neutralisation of HF and NaOH is −16.4 kcal/eq due to extensive hydration of F- on account of its smaller size. S is wrong (value −13.7 is for strong acid-base), E is correct.

Teacher's Note: Strong acid-strong base is about -13.7 kcal; HF gives more due to F- hydration.

Exam Note: Quote the corrected heat of neutralisation.

Question Statement-Explanation 24. S: The pH of pure water is less than 7 at 60°C.
E: As the temperature increases, pure water becomes slightly acidic.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
The scale of pH (0 to 14 at 25°C) changes to (0 to less than 14) as the temperature rises because Kw of water increases with temperature. Note that [H+] = [OH-] and thus water remains neutral. S is correct, E is wrong.

Teacher's Note: Kw rises with temperature, so neutral pH falls below 7.

Exam Note: Pure water is always neutral.

Question Statement-Explanation 25. S: The pH of human blood at body temperature is found to be 6.9.
E: Blood is alkaline in nature.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (d).
Blood is alkaline and at body temperature (98°F) the scale of pH lies between 0 to 13.6. Both are correct (pH 6.9 is above the neutral value of about 6.8), but E is not the explanation of S.

Teacher's Note: Neutral pH at body temperature is below 7, so 6.9 is slightly basic.

Exam Note: Compare with neutral pH at that temperature.

Question Statement-Explanation 26. S: Solubility of AgCl is more in conc. HCl than in water.
E: AgCl form a complex with conc. HCl and thus solubility of AgCl increases in conc. HCl.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement (soluble chloro complex such as [AgCl2]-).

Teacher's Note: Excess chloride forms a soluble complex.

Exam Note: Differs from dilute chloride, which lowers solubility.

Question Statement-Explanation 27. S: All Arrhenius acids are also Bronsted acids.
E: All Bronsted bases are also Lewis bases.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): Corrected: (d) (book key: (a)).
Book key says E is wrong because "all Bronsted bases are not Lewis bases". Corrected: every Bronsted base has a lone pair to accept a proton, so every Bronsted base is a Lewis base (the same book key in More Than One Correct 6 states this). Both S and E are correct, but E does not explain S.

Teacher's Note: Proton acceptor needs a lone pair, hence it is a Lewis base.

Exam Note: Check consistency with earlier definitions.

Question Statement-Explanation 28. S: Cl- is weak base than C2H5O-.
E: Stronger is acid, weaker is its conjugate base.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement: HCl is a much stronger acid than C2H5OH.

Teacher's Note: Stronger acid gives a weaker conjugate base.

Exam Note: Compare HCl with ethanol.

Question Statement-Explanation 29. S: H3BO3 in water behaves as monobasic acid.
E: The ionisation reaction is: H3BO3 + H2O ⇌ B(OH)4- + H+.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (c).
Explanation is the correct reason for the statement.

Teacher's Note: Only one H+ is released per molecule.

Exam Note: Boron accepts OH- from water.

Question Statement-Explanation 30. S: Solubility of AgCl is less in 0.1 M NaCl than in water.
E: In presence of NaCl, the solubility of AgCl is lowered on account of common ion effect.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
AgCl(s) ⇌ Ag+ + Cl-, Ksp = [Ag+][Cl-]. If [Cl-] increases the equilibrium shifts backward, i.e. the solubility of AgCl decreases in presence of NaCl (Le Chatelier). The book says E is wrong because in a common ion effect there must be a weak electrolyte. Note: other texts call this the common ion effect (giving (c)); the key follows the book's definition, so needs a human check.

Teacher's Note: Increasing chloride pushes the equilibrium back to solid.

Exam Note: Flag the book's narrow definition of common ion effect.

Question Statement-Explanation 31. S: In water orthoboric acid behaves as a weak monobasic acid.
E: In water orthoboric acid behaves as a proton donor.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
B(OH)3 + H2O ⇌ B(OH)4- + H+: it acts as a Lewis acid (accepts OH-), not as a proton donor. S is correct, E is wrong.

Teacher's Note: Boric acid is a Lewis acid.

Exam Note: It does not donate its own proton.

Question Statement-Explanation 32. S: HNO3 is a stronger acid than HNO2.
E: In HNO3 there are two nitrogen-to-oxygen bonds whereas in HNO2 there is only one.
Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation for S; (d) Both S and E are correct but E is not correct explanation for S.

Solution. Answer (from book): (a).
Oxidation state of N is +5 in HNO3 and +3 in HNO2. The higher oxidation state makes HNO3 stronger, so S is correct and E is wrong.

Teacher's Note: Higher oxidation state of N means stronger acid.

Exam Note: Reason is oxidation state, not bond count.

Matching Type Problems

Question Matching Type I-1. Match List A with List B. List A: (a) Adsorption indicator, (b) External indicator, (c) Self indicator, (d) Acid-base indicator. List B: (i) K3Fe(CN)6, (ii) Starch, (iii) Methyl red, (iv) KMnO4.

Solution. Answer (from key): a-ii; b-i; c-iv; d-iii.
Starch adsorbs iodine, K3Fe(CN)6 is used as an external indicator (spot test), KMnO4 is its own indicator, and methyl red is an acid-base indicator.

Teacher's Note: Each indicator type is tied to a typical reagent.

Exam Note: Match by how the indicator works.

Question Matching Type I-2. Match List A with List B. List A: (a) pH of amphiprotic salt, (b) pH of mixtures of two weak acids, (c) pH of a basic buffer mixture, (d) pH of an acidic buffer mixture, (e) pH of a salt solution of weak acid + strong base, (f) pH of a salt solution of strong acid + weak base. List B: 1. −½[log(Ka1c1 + Ka2c2)]; 2. ½[pKa1 + pKa2]; 3. pKa + log [conjugate base]/[acid]; 4. pKa + log [base]/[conjugate acid]; 5. ½[pKw + pKa + log c]; 6. ½[pKw − pKb − log c].

Solution. Answer (from key): a-2; b-1; c-4; d-3; e-5; f-6.
Amphiprotic salt uses mean of pKa values; salt of weak acid and strong base uses 5; salt of strong acid and weak base uses 6; buffers use the Henderson forms 3 and 4.

Teacher's Note: Match each system to its standard pH formula.

Exam Note: Learn the six formulas as a set.

Question Matching Type I-3. Match List A with List B. List A: (a) Ksp of BaCl2·2H2O, (b) Ka2 of dibasic acid, (c) Conjugate acid of RNH2, (d) Conjugate base of RNH2, (e) Solubility of AgCl in NaCl. List B: 1. [Ba2+][Cl-]2[H2O]2; 2. [Ba2+][Cl-]2; 3. [A2-]; 4. RNH-; 5. RNH3+; 6. S = Ksp/[Cl-].

Solution. Answer (from key): a-2; b-3; c-5; d-4; e-6.
Water of hydration is left out of Ksp; the conjugate acid of RNH2 gains H+, the conjugate base loses H+; solubility in NaCl is Ksp over the common chloride. For Ka2 of a dibasic acid, the key pairs it with [A2-] (the book treats the second dissociation product as equal to Ka2).

Teacher's Note: Hydrate water is excluded from Ksp; add or remove one proton for conjugates.

Exam Note: Check each pairing against a definition.

Question Matching Type II-4. Match List A with List B (more than one match possible). List A: (a) Solubility of PbS, (b) Solubility of Ag2S, (c) Solubility of CuS, (d) Solubility of BaSO4. List B: 1. Increases in dil. HCl aq.; 2. Increases in dil. NaCN aq.; 3. Increases in dil. NH3 aq.; 4. Increases in conc. HCl.

Solution. Answer (from key): a-1,3,4; b-1,2,3,4; c-1,2,3,4; d-4.
This is the book key as printed; some of these matches (for example sulphides in dilute NH3 or dilute HCl) are chemically doubtful, so it needs a human check.

Teacher's Note: Solubility rises when an ion is protonated, complexed or removed.

Exam Note: Key is quoted; verify chemistry before use.

Question Matching Type III-5. Match each item of List A with one item of List B and one of List C. List A: A. Melting of ice, B. Freezing of water, C. 0.1 M NaHS(aq), D. 0.1 M CH3COONH4(aq), E. 0.1 M NH4Cl(aq). List B: 1. Favoured with decrease in P; 2. Favoured with increase in P; 3. Hydrolysis and protonation; 4. Hydrolysis; 5. Acidic. List C: a. pH = ½[pKa1 + pKa2]; b. pH = ½[pKw + pKa − pKb]; c. Favoured by addition of ice; d. Not favoured by addition of ice; e. pH = ½[pKa − log C].

Solution. Answer (from key): A-2-d; B-1-c; C-3-a; D-4-b; E-5-e.
Melting of ice is favoured by increase in pressure (ice is less dense than water) and is not favoured by adding ice; freezing is the reverse. NaHS is amphiprotic (hydrolysis and protonation, pH = ½(pKa1 + pKa2)); CH3COONH4 undergoes simple hydrolysis with pH = ½[pKw + pKa − pKb]; NH4Cl is acidic with pH = ½[pKa − log C].

Teacher's Note: Pressure and ice affect the ice-water equilibrium; salts follow their own pH formula.

Exam Note: Match each salt to its type of hydrolysis, then its formula.

Step-by-Step P Bahadur Solutions for JEE Math

Download P Bahadur Solutions for JEE

Explore reliable mathematical solutions for P Bahadur Solutions Numerical Chemistry Chapter 13 Ionic Equilibrium Part 2 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for JEE

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.