Official OP Tandon Textbook Solutions: JEE Chemistry Chapter 07 Chemical Thermodynamics Thermochemistry
Explore reliable textbook solutions for Chapter 07 Chemical Thermodynamics Thermochemistry tailored for JEE learners using OP Tandon methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Chapter-wise Solutions for Chemistry: Chapter 07 Chemical Thermodynamics Thermochemistry
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
7. Chemical Thermodynamics and Thermochemistry - Part 1 (Examples 1-61 and Objective Questions 1-33)
Some Solved Examples
Example 1. A gas expands by 0.5 litre against a constant pressure of one atmosphere. Calculate the work done in joule and calorie.
Solution. Work = −Pext × volume change = −1 × 0.5 = −0.5 litre-atm = −0.5 × 101.328 J = −50.664 J. Also 0.5 litre-atm = −0.5 × 24.20 cal = −12.10 cal (work done by the gas, hence negative).
Teacher's Note: Work by the gas is w = −PΔV; convert litre-atm with 1 L-atm = 101.3 J = 24.2 cal.
Exam Note: Sign of w and the unit conversion earn the marks.
Solution. (a) At stage A: V = 24.0 L, T = 300 K, n = 1, R = 0.0821 litre-atm K−1 mol−1. From PV = nRT: P = 1 × 0.0821 × 300 / 24.0 = 1.026 atm.
At stage B: volume remains the same but temperature changes from 300 K to 600 K; by the pressure law the pressure doubles: PB = 2 × 1.026 = 2.052 atm.
At stage C: temperature is 300 K and volume is half that of A; by Boyle's law the pressure at C is double that at A: PC = 2 × 1.026 = 2.052 atm.
(b) (i) A to B: volume remains constant, so the process is isochoric. (ii) B to C: pressure remains constant, so the process is isobaric. (iii) C to A: temperature remains constant, so the process is isothermal. (iv) Overall, the process is cyclic as it returns to the initial state.
Teacher's Note: Apply PV = nRT at each point; the constant variable names the process.
Exam Note: Name each process from the constant variable.
Solution. (i) Process A → B is an expansion, so work is done by the gas: w = −P × dV = −12 × 105 × 5 × 10−3 = −6000 J.
Work done in B → C is zero as volume remains constant.
Process C → D is a contraction, hence work is done on the gas: w = P × dV = 2 × 105 × 5 × 10−3 = +1000 J.
(ii) Work done in D → A is zero as volume remains constant.
Net work done in the whole cycle = −6000 + 1000 = −5000 J, i.e. net work is done by the gas.
Teacher's Note: Work exists only on the constant-pressure legs; the cycle's net work equals the enclosed area.
Exam Note: Isochoric legs give zero work; add signed work.
Example 4. Calculate the work done when 1.0 mole of water at 373 K vaporizes against an atmospheric pressure of 1.0 atmosphere. Assume ideal gas behaviour.
Solution. The volume occupied by water is very small and thus the volume change is equal to the volume occupied by one gram mole of water vapour.
V = nRT/P = (1.0 × 0.0821 × 373)/1.0 = 31.0 litre.
W = −Pext × ΔV = −(1.0) × (31.0) litre-atm = −(31.0) × 101.3 J = −3140.3 J.
Teacher's Note: Liquid volume is negligible, so ΔV is the vapour volume from PV = nRT; work is done by the system.
Exam Note: Neglect liquid volume; negative sign for expansion.
Example 5. Identify different steps in the following cyclic process. (P-V diagram: a six-sided cycle A → B → C → D → E → F → A; temperature at A, B and F is T1 and at C, D and E is T2; T1 > T2. A → B is a horizontal line at the top, B → C slopes down to the right, C → D is vertical downward, D → E is horizontal back to the left, E → F slopes up to the left, F → A is vertical upward.)
Solution. (i) A → B (temperature and pressure are constant): it is an isothermal and isobaric process.
(ii) B → C: it is adiabatic expansion in which the temperature falls from T1 to T2.
(iii) C → D (temperature and volume are constant): this process is isothermal and isochoric.
(iv) D → E (temperature and pressure are constant): it is isothermal and isobaric contraction.
(v) E → F (it is adiabatic compression in which temperature increases from T2 to T1): adiabatic compression.
(vi) F → A (temperature and volume are constant): it is isothermal and isochoric process.
Teacher's Note: Read which of P, V, T stays fixed on each leg; a temperature change on a curve means adiabatic.
Exam Note: Name each leg from constant variable or temperature change.
Solution. (a) At A: PV = nRT: 20 × 1 = 1 × 0.0821 × T1, so T1 = 243.6 K.
At B: 20 × 10 = 1 × 0.0821 × T2, so T2 = 2436 K.
(The figure label at B reads "20 litre" in print; the book's own solution uses V = 10 litre at B, which is consistent with C also being at 10 litre. 10 litre is used here.)
(b) Corrected: the printed working treats A → B as having ΔE = 0 and skips the signs for C → A; the correct values are as follows (R = 2 cal K−1 mol−1, CV = 3R/2).
Path AB (isobaric expansion): Wby gas = PΔV = 20 × 9 = 180 litre-atm = 180 × 101.3/4.185 = 4357 cal, so w = −4357 cal. ΔE = nCVΔT = (3/2) × 2 × (2436 − 243.6) = +6577 cal. q = ΔE − w = 6577 + 4357 = +10934 cal.
Path BC (isochoric cooling): w = 0; qV = ΔE = nCVΔT = (3/2) × 2 × (243.6 − 2436) = −6577.2 cal.
Path CA (isothermal compression): ΔE = 0; w = 2.303 nRT log(VC/VA) = 2.303 × 1 × 2 × 243.6 × log 10 = +1122 cal (work done on gas); q = −w = −1122 cal.
Check for the cycle: ΣΔE = 6577 − 6577 + 0 = 0; net q = 10934 − 6577 − 1122 = 3235 cal = net work done by gas (4357 − 1122 = 3235 cal).
Teacher's Note: Each leg: identify the process, then use ΔE = nCVΔT and the first law; cycle ΔE must be zero.
Exam Note: Show ΔE, q and w for every step with signs.
Example 7. If 500 calorie of heat energy are added to a system and the system does 350 calorie of work on the surroundings, what is the energy change of the system?
Solution. Heat absorbed, q = 500 cal. Work done by the system, w = −350 cal. Applying the first law of thermodynamics, ΔE = q + w = 500 + (−350) = 150 calorie.
Teacher's Note: Work done by the system enters ΔE = q + w as negative.
Exam Note: Mind the sign convention for w.
Example 8. If 100 calorie of heat are added to the same system as in example 1 and a work of 50 calorie is done on the system, calculate the energy change of the system.
Solution. Heat absorbed, q = 100 cal. Work done on the system, w = +50 cal. Applying the first law of thermodynamics, ΔE = q + w = (100 + 50) = 150 calorie.
In the above two examples, the final state is the same but the paths adopted are different. Thus the change in energy of the system depends on the initial and final states but does not depend on the path by which the final state has been reached; q and w are, therefore, not state functions but ΔE is a state function.
Teacher's Note: Same ΔE = 150 cal by different q and w shows ΔE is a state function.
Exam Note: State why ΔE is path independent.
Example 9. A gas contained in a cylinder fitted with a frictionless piston expands against a constant pressure 1 atmosphere from a volume of 4 litre to a volume of 14 litre. In doing so, it absorbs 800 J thermal energy from surroundings. Determine ΔE for the process.
Solution. Given, q = 800 J. ΔV = (14 − 4) = 10 litre. w = −P × ΔV = −1 × 10 = −10 litre-atm.
But 0.082 litre-atm = 1.987 cal, so w = −(10 × 1.987)/0.082 = −242.3 cal. Since 1 calorie = 4.184 J, w = −242.3 × 4.184 = −1013.7 J.
ΔE = q + w = (800 − 1013.7) = −213.7 J. (Using 1 litre-atm = 101.3 J gives −213 J; the small difference is rounding.)
Teacher's Note: Convert litre-atm to joule before adding to q; expansion work is negative.
Exam Note: Same units for q and w before ΔE.
Example 10. 1 mole of Fe2O3 and 2 mole of Al are mixed at temperature 25°C and the reaction is completed to give: Fe2O3(s) + 2Al(s) → Al2O3(s) + 2Fe(l); ΔH = −850 kJ. The liberated heat is retained within the products, whose combined specific heat over a wide temperature range is about 0.8 J g−1 K−1. The melting point of iron is 1530°C. Show that the quantity of heat liberated is sufficient to raise the temperature of the product to the melting point of iron in order to get it welded.
Solution. Mass of products = mass of one mole Al2O3 + mass of two mole Fe = 214 g.
q = m s ΔT = 214 × 0.8 × (1803 − 298) = 257656 J = 257.656 kJ.
Heat required is less than the heat released (850 kJ), hence the temperature can be easily raised to the required value.
Teacher's Note: Compare heat needed, m s ΔT with ΔT from 298 K to 1803 K, against heat released.
Exam Note: Convert °C to K; compare 257.7 kJ with 850 kJ.
Example 11. Calculate w and ΔE for the conversion of 0.5 mole of water at 100°C to steam at 1 atm pressure. Heat of vaporisation of water at 100°C is 40670 J mol−1.
Solution. Volume of 0.5 mole of steam at 1 atm = nRT/P = (0.5 × 0.0821 × 373)/1.0 = 15.3 L.
Change in volume = vol. of steam − vol. of water = 15.3 − negligible = 15.3 L.
Work done by the system, w = Pext × volume change = 1 × 15.3 = 15.3 litre-atm = 15.3 × 101.3 J = 1549.89 J. 'w' should be negative as the work has been done by the system on the surroundings: w = −1549.89 J.
Heat required to convert 0.5 mole of water at 100°C to steam = 0.5 × 40670 J = 20335 J.
According to the first law, ΔE = q + w = 20335 − 1549.89 = 18785.11 J.
Teacher's Note: Vaporisation heat at constant pressure is q; subtract the expansion work against 1 atm.
Exam Note: Sign of w negative; ΔE = q + w.
Example 12. Calculate the work done when 50 g of iron is dissolved in HCl at 25°C in (i) a closed vessel and (ii) an open beaker when the atmospheric pressure is 1 atm.
Solution. (i) When the reaction is carried in a closed vessel, the change in volume is zero. Hence the work done by the system will be zero.
(ii) When iron dissolves in HCl, hydrogen is produced: Fe (56 g) + 2HCl → FeCl2 + H2 (1 mole). 50 g Fe gives (1/56) × 50 mole H2.
Volume of hydrogen produced at 25°C = nRT/P = (50/56) × (0.0821 × 298)/1 = 21.84 L. This is equal to the volume change when the reaction is carried in an open beaker.
Work done by the system = −P ΔV = −1.0 × 21.84 = −21.84 litre-atm = −2212.39 J.
Teacher's Note: Work arises only from gas evolved: moles of H2 from Fe, then w = −PΔV.
Exam Note: Closed vessel: w = 0; open: −PΔV.
Example 13. 5 mole of oxygen are heated at constant volume from 10°C to 20°C. What will be the change in the internal energy of the gas? The molar heat of oxygen at constant pressure, CP = 7.03 cal mol−1 deg−1 and R = 8.31 J mol−1 deg−1.
Solution. R = 8.31 J mol−1 deg−1 = (8.31/4.18) cal mol−1 deg−1 = 1.99 cal mol−1 deg−1.
CP − CV = R, so CV = CP − R = 7.03 − 1.99 = 5.04 cal mol−1 deg−1.
Heat absorbed by 5 mole of oxygen in heating from 10°C to 20°C = 5 × CV × ΔT = 5 × 5.04 × 10 = 252 cal.
Since the gas is heated at constant volume, no external work is done, i.e. w = 0. So change in internal energy = heat absorbed: ΔE = q + w = 252 + 0 = 252 cal.
Teacher's Note: At constant volume ΔE = nCVΔT; get CV from CP − R in matching units.
Exam Note: Convert R to cal before CP − CV.
Example 14. Calculate the amount of work done by 2 mole of an ideal gas at 298 K in reversible isothermal expansion from 10 litre to 20 litre.
Solution. Amount of work done in reversible isothermal expansion, w = −2.303 nRT log(V2/V1).
Given n = 2, R = 8.314 J K−1 mol−1, T = 298 K, V2 = 20 L and V1 = 10 L.
w = −2.303 × 2 × 8.314 × 298 × log(20/10) = −2.303 × 2 × 8.314 × 298 × 0.3010 = −3434.9 J, i.e. work is done by the system.
Teacher's Note: Reversible isothermal work: w = −2.303 nRT log(V2/V1), with R in J.
Exam Note: Negative sign: work done by gas.
Example 15. 5 moles of an ideal gas expand isothermally and reversibly from a pressure of 10 atm to 2 atm at 300 K. What is the largest mass which can be lifted through a height of 1 metre in this expansion?
Solution. Work done by the system = −nRT ln(P1/P2) = −2.303 nRT log(P1/P2) = −2.303 × 5 × 8.314 × 300 × log(10/2) = −20.075 × 103 J.
Let M be the mass which can be lifted through a height of 1 m. Work done in lifting the mass = Mgh = M × 9.8 × 1 J.
So M × 9.8 = 20.075 × 103, M = 2048.469 kg.
Teacher's Note: Maximum work is the reversible isothermal work; equate its magnitude to Mgh.
Exam Note: Use magnitude of work equal to Mgh.
Example 16. Two moles of an ideal monoatomic gas at NTP are compressed adiabatically and reversibly to occupy 4.48 dm3. Calculate the amount of work done, ΔE, final temperature and pressure of the gas. CV for ideal gas = 12.45 J K−1 mol−1.
Solution. For an ideal gas, γ = CP/CV = 1.667.
Initial volume, V1 = 2 × 22.4 = 44.8 dm3; initial pressure P1 = 1 atm; initial temperature T1 = 273 K; final volume V2 = 4.48 dm3.
Let the final pressure be P2 and temperature be T2. Applying P1V1γ = P2V2γ:
P1/P2 = (V2/V1)γ = (4.48/44.8)1.667, so P2/P1 = (10)1.667, P2 = (10)1.667 (P1 = 1 given). log P2 = 1.667 log 10 = 1.667, P2 = antilog 1.667 = 46.45 atm.
Final temperature = (P2V2/P1V1) · T1 = (46.45 × 4.48)/(1 × 44.8) × 273 = 1268 K.
Work done on the system = n · CV · ΔT = 2 × 12.45 × (1268 − 273) = 2 × 12.45 × 995 = 24775.5 J.
From the first law, ΔE = q + w = 0 + 24775.5 = 24775.5 J.
Teacher's Note: Adiabatic: q = 0, so ΔE = w = nCVΔT; find T and P from PVγ constant.
Exam Note: q = 0 gives ΔE = w; state γ.
Example 17. A certain volume of dry air at NTP is expanded reversibly to four times its volume (a) isothermally (b) adiabatically. Calculate the final pressure and temperature in each case, assuming ideal behaviour. (CP/CV for air = 1.4)
Solution. Let V1 be the initial volume of dry air at NTP.
(a) Isothermal expansion: temperature remains the same, so final temperature = 273 K. P1V1 = P2V2, P2 = P1V1/V2 = (1 × V1)/(4V1) = 0.25 atm.
(b) Adiabatic expansion: T1/T2 = (V2/V1)γ−1; 273/T2 = (4V1/V1)1.4−1 = 40.4; T2 = 273/40.4 = 156.79 K.
Final pressure: P1/P2 = (V2/V1)γ; 1/P2 = 41.4; P2 = 1/41.4 = 0.143 atm.
Teacher's Note: Isothermal uses P1V1 = P2V2; adiabatic uses TVγ−1 and PVγ constant.
Exam Note: Adiabatic pressure falls more than isothermal.
Example 18. Calculate q, w, ΔE and ΔH for the reversible isothermal expansion of one mole of an ideal gas at 127°C from a volume of 10 dm3 to 20 dm3.
Solution. Since the process is isothermal, ΔE = ΔH = 0.
From the first law: ΔE = q + w = 0, so q = −w.
w = −2.303 nRT log(V2/V1) = −2.303 × 1 × 8.314 × 400 × log(20/10) = −2.303 × 1 × 8.314 × 400 × 0.3010 = −2305.3 J (work is done by the system).
q = −w = 2305.3 J (heat is absorbed by the system).
Teacher's Note: Isothermal ideal gas: ΔE = ΔH = 0, so q = −w; T = 400 K.
Exam Note: Convert 127°C to 400 K.
Example 19. A gas expands from a volume of 3.0 dm3 to 5.0 dm3 against a constant pressure of 3.0 atm. The work done during expansion is used to heat 10.0 mole of water of temperature 290.0 K. Calculate the final temperature of water (specific heat of water = 4.184 J K−1 g−1). (IIT 1993)
Solution. Work done = P × dV = 3.0 × (5.0 − 3.0) = 6.0 litre-atm = 6.0 × 101.3 J = 607.8 J.
Let ΔT be the change in temperature. Heat absorbed = m × s × ΔT. Given P × dV = m × s × ΔT, so ΔT = (P × dV)/(m × s) = 607.8/(10.0 × 18.0 × 4.184) = 0.807.
Final temperature = 290 + 0.807 = 290.807 K.
Teacher's Note: Equate PΔV in joules to m s ΔT; 10 mole water has mass 180 g.
Exam Note: Convert litre-atm to J; use mass, not moles.
Example 20. 10 g of argon gas is compressed isothermally and reversibly at a temperature of 27°C from 10 litre to 5 litre. Calculate q, w, ΔE and ΔH for this process. R = 2 cal K−1 mol−1, log 2 = 0.30. Atomic weight of Ar = 40. (IIT 1997)
Solution. w = −2.303 nRT log(V2/V1) = −2.303 × (10/40) × 2 × 300 × log(5/10) = +103.635 cal.
ΔE = 0 (isothermal, ideal gas), and so ΔH = 0.
q = ΔE − w, therefore q = −w = −103.635 cal.
Teacher's Note: Isothermal compression: w positive, q negative equal in size, ΔE = ΔH = 0.
Exam Note: State all four: q, w, ΔE, ΔH.
Example 21. Calculate the maximum work done in expanding 16 g of oxygen at 300 K and occupying a volume of 5 dm3 isothermally until the volume becomes 25 dm3.
Solution. Reversible work is maximum work. w = −2.303 nRT log(V2/V1); magnitude = 2.303 × (16/32) × 8.314 × 300 × log(25/5) = 2.01 × 103 joule (work done by the gas).
Teacher's Note: Maximum work means reversible path; n = 16/32 mole of O2.
Exam Note: Use reversible formula; state magnitude.
Example 22. How much heat is required to change 10 g ice at 0°C to steam at 100°C? Latent heat of fusion and vaporization for H2O are 80 cal/g and 540 cal/g respectively. Specific heat of water is 1 cal/g.
Solution. Total heat absorbed = ΔHfusion + ΔHtemp. rise + ΔHvap = 10 × 80 + 10 × 1 × 100 + 10 × 540 = 800 + 1000 + 5400 = 7200 cal.
Teacher's Note: Add three steps: melting, heating water 0 to 100°C, vaporising.
Exam Note: Do not omit the heating step.
Example 23. A swimmer coming out of a pool is covered with a film of water weighing about 80 g. How much heat must be supplied to evaporate this water? (ΔHvap of water = 40.79 kJ mol−1)
Solution. q = mL = (80/18) × 40.79 = 181.28 kJ.
Teacher's Note: Convert mass to moles then multiply by molar enthalpy of vaporisation.
Exam Note: Use moles, not grams, with kJ mol−1.
Illustrations of Objective Questions
Objective Question 1. 5 moles of an ideal gas at 27°C expands isothermally and reversibly from a volume of 6 L to 60 L. The work done in kJ is: (a) −14.7 (b) −28.72 (c) +28.72 (d) −56.72
Solution. Answer (b). w = −2.303 nRT log(V2/V1) = −2.303 × 5 × 8.314 × 300 × log(60/6) = −28.72 kJ.
Teacher's Note: Tenfold volume gives log 10 = 1; expansion work is negative.
Exam Note: Check the sign and kJ conversion.
Objective Question 2. 10 moles of an ideal gas confined to a volume of 10 L is released into atmosphere at 300 K where the pressure is 1 bar. The work done by the gas is: (R = 0.083 L bar K−1 mol−1) (a) 249 L bar (b) 259 L bar (c) 239 L bar (d) 220 L bar
Solution. Answer (c). Initial volume V1 = 10 L. V2 (final) = nRT/P = (10 × 0.083 × 300)/1 = 249 L. W = PΔV = 1 × (249 − 10) = 239 L bar.
Teacher's Note: Expansion against constant external pressure: work is P(V2 − V1), not nRT.
Exam Note: Subtract initial volume 10 L.
Objective Question 3. 1 litre-atm work is approximately equal to: (a) 101.3 J (b) 8.314 J (c) 931 J (d) 19.2 J
Solution. Answer (a). 0.0821 litre-atm = 8.314 J (values of gas constant), therefore 1 litre-atm = 101.3 J.
Teacher's Note: Equate the two values of R: 0.0821 L atm = 8.314 J.
Exam Note: Remember 1 L atm = 101.3 J.
Objective Question 4. A system absorbs 20 kJ heat and also does 10 kJ of work. The net internal energy of the system: (a) increases by 10 kJ (b) decreases by 10 kJ (c) increases by 30 kJ (d) decreases by 30 kJ
Solution. Answer (a). ΔU = q + w = 20 − 10 = 10 kJ.
Teacher's Note: Work done by system is negative in ΔU = q + w.
Exam Note: Sign convention decides the answer.
Objective Question 5. One mole of a gas is heated at constant pressure to raise its temperature by 1°C. The work done in joules is: (a) −4.3 (b) −8.314 (c) −16.62 (d) unpredictable
Solution. Answer (b). w = −nR ΔT or w = −P ΔV = −1 × 8.314 × 1 = −P(nRT2/P − nRT1/P) = −8.314 J.
Teacher's Note: At constant pressure for an ideal gas, w = −nRΔT, independent of pressure.
Exam Note: For 1 mole, 1 K: w = −R.
Objective Question 6. In open system: (a) there will be exchange of both matter and energy (b) there will be no exchange of matter and energy (c) there will be exchange of energy only (d) there will be exchange of matter only
Solution. Answer (a). Open system has imaginary boundary, therefore both energy and mass can be exchanged.
Teacher's Note: Open: matter and energy; closed: energy only; isolated: neither.
Exam Note: Contrast open, closed, isolated systems.
Some Solved Examples (Heats of Formation and Combustion)
Example 24. The heat of combustion of ethylene at 18°C and at constant volume is −335.8 kcal when water is obtained in liquid state. Calculate the heat of combustion at constant pressure and at 18°C.
Solution. The chemical equation for the combustion of C2H4 is: C2H4(g) + 3O2(g) = 2CO2(g) + 2H2O(l); ΔE = −335.8 kcal.
Number of moles of reactants = 1 + 3 = 4; number of moles of products = 2. So Δn = (2 − 4) = −2.
Given ΔE = −335.8 kcal, Δn = −2, R = 2 × 10−3 kcal, T = (18 + 273) = 291 K.
ΔH = ΔE + ΔnRT = −335.8 + (−2)(2 × 10−3)(291) = −336.964 kcal.
Teacher's Note: Count only gaseous moles for Δn; water is liquid here; then ΔH = ΔE + ΔnRT.
Exam Note: Liquid water is excluded from Δn.
Example 25. The enthalpy of formation of methane at constant pressure and 300 K is −75.83 kJ. What will be the heat of formation at constant volume? (R = 8.3 J K−1 mol−1)
Solution. The equation for the formation of methane is C(s) + 2H2(g) = CH4(g); ΔH = −75.83 kJ.
Δn = (1 − 2) = −1. Given ΔH = −75.83 kJ, R = 8.3 × 10−3 kJ K−1 mol−1, T = 300 K.
ΔH = ΔE + ΔnRT: −75.83 = ΔE + (−1)(8.3 × 10−3)(300), so ΔE = −75.83 + 2.49 = −73.34 kJ.
Teacher's Note: Gaseous moles drop from 2 to 1, so Δn = −1; rearrange ΔE = ΔH − ΔnRT.
Exam Note: Carbon solid is not counted in Δn.
Example 26. Calculate the enthalpy change for the following reaction: CH4(g) + 2O2(g) → CO2(g) + 2H2O(l), given enthalpies of formation of CH4, CO2 and H2O are −74.8 kJ mol−1, −393.5 kJ mol−1 and −286.2 kJ mol−1 respectively.
Solution. ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants) = [ΔH°f(CO2) + 2ΔH°f(H2O)] − [ΔH°f(CH4) + 2ΔH°f(O2)] = [−393.5 + 2 × (−286.2)] − [−74.8 + 2 × 0] = −393.5 − 572.4 + 74.8 = −891.1 kJ.
Teacher's Note: Products minus reactants, weighting by coefficients; ΔHf of O2 is zero.
Exam Note: Multiply by stoichiometric coefficients.
Example 27. The standard heats of formation at 298 K for CCl4(g), H2O(g), CO2(g) and HCl(g) are −25.5, −57.8, −94.1 and −22.1 kcal mol−1 respectively. Calculate ΔH°298 for the reaction CCl4(g) + 2H2O(g) → CO2(g) + 4HCl(g).
Solution. ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants) = [ΔH°f(CO2) + 4ΔH°f(HCl)] − [ΔH°f(CCl4) + 2ΔH°f(H2O)] = [−94.1 + 4 × (−22.1)] − [−25.5 + 2 × (−57.8)] = −94.1 − 88.4 + 25.5 + 115.6 = −182.5 + 141.1 = −41.4 kcal.
Teacher's Note: Use ΣΔHf(products) − ΣΔHf(reactants) with coefficients 4 and 2.
Exam Note: Show substitution line for full marks.
Example 28. The molar heat of formation of NH4NO3(s) is −367.5 kJ and those of N2O(g) and H2O(l) are +81.46 kJ and −285.78 kJ respectively at 25°C and 1 atmosphere pressure. Calculate the ΔH and ΔE for the reaction NH4NO3(s) → N2O(g) + 2H2O(l).
Solution. Corrected: ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants) = [81.46 + 2 × (−285.78)] − [−367.5] = 81.46 − 571.56 + 367.5 = −122.60 kJ (the book prints −122.56 kJ, an arithmetic slip).
ΔH = ΔE + ΔnRT, so ΔE = ΔH − ΔnRT. Δn = 1; R = 8.314 × 10−3 kJ mol−1 K−1; T = 298 K.
ΔE = −122.60 − (1)(8.314 × 10−3)(298) = −122.60 − 2.478 = −125.08 kJ (the book prints −125.037 kJ, following from its −122.56).
Teacher's Note: ΔH from formation enthalpies; Δn counts only the one gaseous product, N2O.
Exam Note: Δn = 1: solid reactant, liquid water excluded.
Enthalpy of Combustion or Heat of Combustion
Example 29. The heats of combustion of CH4 and C4H10 are −890.3 kJ mol−1 and −2878.7 kJ mol−1 respectively. Which of the two has greater efficiency as fuel per gram?
Solution. Molar mass of methane = 16. Heat produced per gram of methane = −890.3/16 = −55.64 kJ.
Molar mass of butane = 58. Heat produced per gram of butane = −2878.7/58 = −49.63 kJ.
Thus, methane has greater fuel efficiency than butane.
Teacher's Note: Compare heat per gram, not per mole: divide by molar mass.
Exam Note: Per-gram comparison decides fuel efficiency.
Example 30. In a Gobar gas plant, gobar gas is formed by bacterial fermentation of animal refuse. It mainly contains methane and its heat of combustion is −809 kJ mol−1 according to following equation: CH4 + 2O2 → CO2 + 2H2O; ΔH = −809 kJ mol−1. How much gobar gas would have to be produced per day for a small village of 50 families, if it is assumed that each family requires 20,000 kJ of energy per day? The methane content in gobar gas is 80% by mass.
Solution. Energy consumption of 50 families per day = 50 × 20,000 kJ = 1 × 106 kJ.
809 kJ of energy is obtained by burning methane = 16 g. 1 × 106 kJ of energy will be obtained by burning methane = (16/809) × 106 = 1.98 × 104 g = 19.8 kg.
Since methane content in gobar gas is 80% by mass, the mass of gobar gas needed = (100/80) × 19.8 = 24.75 kg.
Teacher's Note: Scale energy to mass of CH4 (16 g per 809 kJ), then divide by the 80% purity.
Exam Note: Divide by 0.80 for purity.
Example 31. The standard molar heats of formation of ethane, carbon dioxide and liquid water are −21.1, −94.1 and −68.3 kcal respectively. Calculate the standard molar heat of combustion of ethane.
Solution. The required chemical equation for combustion of ethane is 2C2H6(g) + 7O2(g) = 4CO2(g) + 6H2O(l); ΔH° = ?
The equation involves 2 moles of C2H6; heat of combustion of ethane will be ΔH°/2.
ΔH° = ΣΔH°f(products) − ΣΔH°f(reactants) = [4 × (−94.1) + 6 × (−68.3)] − [2 × (−21.1) + 7 × 0] = −376.4 − 409.8 + 42.2 = −744.0 kcal.
ΔH°/2 = heat of combustion of ethane = −744.0/2 = −372.0 kcal.
Teacher's Note: Balance for 2 mole ethane, find ΔH°, then divide by 2 for one mole.
Exam Note: Divide by 2: heat of combustion is per mole.
Example 32. An intimate mixture of ferric oxide and aluminium is used as solid fuel in rockets. Calculate the fuel value per cm3 of the mixture. Heats of formation and densities are as follows: Hf(Al2O3) = −399 kcal mol−1; Hf(Fe2O3) = −199 kcal mol−1. Density of Fe2O3 = 5.2 g/cm3; density of Al = 2.7 g/cm3.
Solution. The required equation is 2Al + Fe2O3 → Al2O3 + 2Fe; ΔH = ?
ΔH = ΣΔHf(products) − ΣΔHf(reactants) = [ΔHf(Al2O3) + 2ΔHf(Fe)] − [2ΔHf(Al) + ΔHf(Fe2O3)] = (−399 + 2 × 0) − [2 × 0 + (−199)] = −399 + 199 = −200 kcal.
Atomic mass of aluminium = 27, molar mass of Fe2O3 = 160. Volume of reactants = 160/5.2 + (2 × 27)/2.7 = 30.77 + 20 = 50.77 cm3.
Corrected: fuel value per cm3 = 200/50.77 = 3.94 kcal (the book prints 3.92 kcal; 200/50.77 = 3.939).
Teacher's Note: Heat released per mole reaction divided by volume of the reactant mixture, from masses and densities.
Exam Note: Add volumes of both reactants.
Example 33. When 2 mole of C2H6 are completely burnt, 3129 kJ of heat is liberated. Calculate the heat of formation of C2H6. ΔHf for CO2 and H2O are −395 kJ and −286 kJ respectively.
Solution. The equation for the combustion of C2H6 is 2C2H6 + 7O2 → 4CO2 + 6H2O; ΔH = −3129 kJ.
ΔH = ΣΔHf(products) − ΣΔHf(reactants) = [4 × ΔHf(CO2) + 6 × ΔHf(H2O)] − [2 × ΔHf(C2H6) + 7ΔHf(O2)]
−3129 = [4 × (−395) + 6 × (−286)] − [2 × ΔHf(C2H6) + 7 × 0], so 2 × ΔHf(C2H6) = −167.
ΔHf(C2H6) = −167/2 = −83.5 kJ.
Teacher's Note: Reverse the use of formation data: solve for the unknown ΔHf from the measured combustion heat.
Exam Note: Divide by 2 moles at the end.
Example 34. The standard heats of formation of CH4(g), CO2(g) and H2O(g) are −76.2, −398.8 and −241.6 kJ mol−1 respectively. Calculate the amount of heat evolved by burning 1 m3 of methane measured under normal conditions. (IIT 1990)
Solution. The required equation for the combustion of methane is CH4 + 2O2 → CO2 + 2H2O; ΔH = ?
ΔH = ΣΔHf(products) − ΣΔHf(reactants) = ΔHf(CO2) + 2ΔHf(H2O) − ΔHf(CH4) − 2ΔHf(O2) = −398.8 − 2 × 241.6 − (−76.2) − 2 × 0 = −805.8 kJ mol−1.
Heat evolved by burning 22.4 litre (1 mole) methane = −805.8 kJ. So heat evolved by burning 1000 litre (1 m3) methane = −(805.8/22.4) × 1000 = −35973.2 kJ.
Teacher's Note: Find ΔH of combustion per mole, then scale 1000 L by the molar volume 22.4 L at NTP.
Exam Note: Convert 1 m³ to 1000 L.
Example 35. A gas mixture of 3.67 litre of ethylene and methane on complete combustion at 25°C produces 6.11 litre of CO2. Find out the heat evolved on burning 1 litre of the gas mixture. The heats of combustion of ethylene and methane are −1423 and −891 kJ mol−1 at 25°C. (IIT 1991)
Solution. C2H4 + 3O2 → 2CO2 + 2H2O (a litre gives 2a litre CO2); CH4 + 2O2 → CO2 + 2H2O ((3.67 − a) litre gives (3.67 − a) litre CO2).
Given 2a + 3.67 − a = 6.11, so a = 2.44 litre. Volume of ethylene in mixture = 2.44 litre; volume of methane = 1.23 litre.
Volume of ethylene in 1 litre mixture = 2.44/3.67 = 0.6649 litre; volume of methane in 1 litre mixture = 1.23/3.67 = 0.3351 litre.
24.45 litre of a gas at 25°C corresponds to 1 mole. Heat evolved by burning 0.6649 litre of ethylene = −(1423/24.45) × 0.6649 = −38.70 kJ (book prints −38.69 kJ), and by 0.3351 litre of methane = −(891/24.45) × 0.3351 = −12.21 kJ.
So total heat evolved by burning 1 litre of mixture = −38.70 − 12.21 ≈ −50.9 kJ.
Teacher's Note: Use CO2 volumes to split the mixture, then molar volume 24.45 L at 25°C for heat per litre.
Exam Note: Molar volume at 25°C, not 22.4 L.
Enthalpy of Neutralisation or Heat of Neutralisation
Example 36. 150 mL of 0.5 N nitric acid solution at 25.35°C was mixed with 150 mL of 0.5 N sodium hydroxide solution at the same temperature. The final temperature was recorded to be 28.77°C. Calculate the heat of neutralisation of nitric acid with sodium hydroxide.
Solution. Total mass of solution = 150 + 150 = 300 g.
Q = total heat produced = 300 × (28.77 − 25.35) cal = 300 × 3.42 = 1026 cal.
Heat of neutralisation = (Q/150) × 1000 × (1/0.5) = (1026/150) × 1000 × (1/0.5) = 13.68 kcal.
Since heat is liberated, heat of neutralisation should be negative. So, heat of neutralisation = −13.68 kcal.
Teacher's Note: Heat per gram-equivalent: Q divided by equivalents neutralised (0.075 eq), taking solution as water.
Exam Note: Negative sign for exothermic neutralisation.
Example 37. Whenever an acid is neutralised by a base, the net reaction is H+(aq) + OH−(aq) → H2O(l); ΔH = −57.1 kJ. Calculate the heat evolved for the following experiments: (i) 0.50 mole of HCl solution is neutralised by 0.50 mole of NaOH solution. (ii) 0.50 mole of HNO3 solution is mixed with 0.30 mole of KOH solution. (iii) 100 mL of 0.2 M HCl is mixed with 100 mL of 0.3 M NaOH solution. (iv) 400 mL of 0.2 M H2SO4 is mixed with 600 mL of 0.1 M KOH solution.
Solution. According to the reaction H+(aq) + OH−(aq) → H2O(l); ΔH = −57.1 kJ, when 1 mole of H+ ions and 1 mole of OH− ions are neutralised, 1 mole of water is formed and 57.1 kJ of energy is released.
(i) 0.50 mole HCl ≡ 0.50 mole H+; 0.50 mole NaOH ≡ 0.50 mole OH−. On mixing, 0.50 mole of water is formed. Heat evolved = 57.1 × 0.5 = 28.55 kJ.
(ii) 0.50 mole HNO3 ≡ 0.50 mole H+; 0.30 mole KOH ≡ 0.30 mole OH−; i.e. 0.30 mole of H+ react with 0.30 mole of OH− to form 0.30 mole of water. Heat evolved = 57.1 × 0.3 = 17.13 kJ.
(iii) 100 mL of 0.2 M HCl gives (0.2/1000) × 100 = 0.02 mole of H+; 100 mL of 0.3 M NaOH gives (0.3/1000) × 100 = 0.03 mole of OH−; i.e. 0.02 mole of H+ react with 0.02 mole of OH− to form 0.02 mole of water. Heat evolved = 0.02 × 57.1 = 1.142 kJ.
(iv) 400 mL of 0.2 M H2SO4 gives (2 × 0.2/1000) × 400 = 0.16 mole of H+; 600 mL of 0.1 M KOH gives (0.1/1000) × 600 = 0.06 mole of OH−; i.e. 0.06 mole of H+ react with 0.06 mole of OH− to form 0.06 mole of water. Heat evolved = 0.06 × 57.1 = 3.426 kJ.
Teacher's Note: Heat equals 57.1 kJ times moles of water formed, set by the limiting ion H+ or OH−.
Exam Note: Find the limiting ion; H2SO4 gives 2 H+.
Example 38. 100 cm3 of 0.5 N HCl solution at 299.95 K were mixed with 100 cm3 0.5 N NaOH solution at 299.75 K in a thermos flask. The final temperature was found to be 302.65 K. Calculate the enthalpy of neutralisation of HCl. Water equivalent of thermos flask is 44 g.
Solution. The initial average temperature of the acid and the base = (299.95 + 299.75)/2 = 299.85 K. Rise in temperature = (302.65 − 299.85) = 2.80 K.
Heat evolved during neutralisation = (100 + 100 + 44) × 4.184 × 2.8 = 2858.5 J.
∴ Enthalpy of neutralisation = −(2858.5/100) × 1000 × (1/0.50) = −57.17 kJ.
Teacher's Note: Add the flask's water equivalent to the solution mass; use average initial temperature.
Exam Note: Include flask water equivalent in heat calculation.
Example 39. When a student mixed 50 mL of 1 M HCl and 50 mL of 1 M NaOH in a coffee cup calorimeter, the temperature of the resultant solution increases from 21°C to 27.5°C. Assuming that the calorimeter absorbs only a negligible quantity of heat, that the total volume of solution is 100 mL, its density 1 g mL−1 and that its specific heat capacity is 4.18 J/g. Calculate: (a) the heat change during mixing, (b) the enthalpy change for the reaction, HCl(aq) + NaOH(aq) → NaCl(aq) + H2O(aq).
Solution. (a) Number of moles of HCl and NaOH added = MV/1000 = (1 × 50)/1000 = 0.05. Mass of mixture = V × d = 100 × 1 = 100 g. Heat evolved, q = m s ΔT = 100 × 4.18 × (27.5 − 21.0) = 100 × 4.18 × 6.5 J = 2717 J = 2.717 kJ.
(b) The involved reaction is HCl(aq) + NaOH(aq) → NaCl(aq) + H2O. ΔH = heat evolved per mol = −2.717/0.05 = −54.34 kJ.
Teacher's Note: q = m s ΔT for 100 g; divide by 0.05 mole of water formed for ΔH per mole.
Exam Note: Divide q by moles, not volume; sign negative.
Example 40. The enthalpies of neutralisation of a strong acid HA and weaker acid HB by NaOH are −13.7 and −12.7 kcal/eq. When one equivalent of NaOH is added to a mixture containing 1 equivalent of HA and HB; the enthalpy change was −13.5 kcal. In what ratio is the base distributed between HA and HB?
Solution. Let x equivalent of HA and y equivalent of HB be taken in the mixture.
x + y = 1 … (i)
x × 13.7 + y × 12.7 = 13.5 … (ii)
Solving equations (i) and (ii), we get x = 0.8, y = 0.2. x : y = 4 : 1.
Teacher's Note: Weighted average of two neutralisation enthalpies gives two simultaneous equations in x and y.
Exam Note: Set x + y = 1; solve for ratio.
Hess's Law (The Law of Constant Heat Summation)
Example 41. Calculate the standard heat of formation of carbon disulphide (l). Given that the standard heats of combustion of carbon (s), sulphur (s) and carbon disulphide (l) are −393.3, −293.7 and −1108.76 kJ mol−1 respectively. (The printed question omits the minus sign on 293.7; the solution uses −293.72.)
Solution. Required equation is C(s) + 2S(s) → CS2(l); ΔHf = ?
Given: C(s) + O2(g) → CO2(g) (ΔH = −393.3 kJ) … (i); S(s) + O2(g) → SO2(g) (ΔH = −293.72 kJ) … (ii); CS2(l) + 3O2(g) → CO2(g) + 2SO2(g) (ΔH = −1108.76 kJ) … (iii).
First method: multiply eq. (ii) by 2: 2S(s) + 2O2(g) → 2SO2(g) (ΔH = −587.44 kJ) … (iv). Adding eqs. (i) and (iv) and subtracting eq. (iii) gives C(s) + 2S(s) → CS2(l), the required equation. Thus ΔHf = −393.3 − 587.44 + 1108.76 = 128.02 kJ. Standard heat of formation of CS2(l) = 128.02 kJ.
Second method: enthalpy of CO2 = −393.3 kJ, enthalpy of SO2 = −293.72 kJ, enthalpy of O2 = 0 (by convention). ΔH of eq. (iii) = enthalpies of products − enthalpies of reactants: −1108.76 = −393.3 + 2 × (−293.72) − ΔHf(CS2), so ΔHf(CS2) = 1108.76 − 980.74 = 128.02 kJ.
Teacher's Note: Combine combustion equations by Hess's law: add the C and 2S combustions, subtract the CS2 one.
Exam Note: Cancel CO2, SO2, O2; show algebraic sum.
Example 42. Calculate the heat of formation of acetic acid from the following data: CH3COOH(l) + 2O2(g) → 2CO2(g) + 2H2O(l) … (i) (ΔH = −207.9 kcal); C(s) + O2(g) → CO2(g) (ΔH = −94.48 kcal) … (ii); H2(g) + ½O2(g) → H2O(l) (ΔH = −68.4 kcal) … (iii)
Solution. First method: the required equation is 2C(s) + 2H2(g) + O2(g) = CH3COOH(l); ΔH = ?
It is obtained by multiplying eq. (ii) by 2 and eq. (iii) by 2, adding both, and finally subtracting eq. (i).
ΔH(CH3COOH) = 2 × (−94.48) + 2 × (−68.4) − (−207.9) = −188.96 − 136.8 + 207.9 = −325.76 + 207.9 = −117.86 kcal.
Second method: from eqs. (ii) and (iii): enthalpy of CO2 = −94.48 kcal, of H2O = −68.4 kcal, of O2 = 0. ΔH of eq. (i) = enthalpies of products − enthalpies of reactants: −207.9 = 2 × (−94.48) + 2 × (−68.4) − ΔH(CH3COOH), so ΔH(CH3COOH) = −325.76 + 207.9 = −117.86 kcal.
Teacher's Note: Build the formation equation from elements: 2C and 2H2 combustions minus acetic acid combustion.
Exam Note: Multiply equations by 2 before adding.
Example 43. Given the following standard heats of reactions: (a) heat of formation of water = −68.3 kcal, (b) heat of combustion of C2H2 = −310.6 kcal and (c) heat of combustion of ethylene = −337.2 kcal. Calculate the heat of the reaction for the hydrogenation of acetylene at constant volume and at 25°C.
Solution. The required equation is C2H2(g) + H2(g) → C2H4(g); ΔH = ?
Given: (a) H2(g) + ½O2(g) → H2O(l) … (i) (ΔH = −68.3 kcal); (b) C2H2(g) + (5/2)O2(g) → 2CO2(g) + H2O(l) … (ii) (ΔH = −310.6 kcal); (c) C2H4(g) + 3O2(g) → 2CO2(g) + 2H2O(l) … (iii) (ΔH = −337.2 kcal).
The required equation is obtained by adding eqs. (i) and (ii) and subtracting (iii): C2H2(g) + H2(g) → C2H4(g).
ΔH = −68.3 − 310.6 − (−337.2) = −378.9 + 337.2 = −41.7 kcal.
We know that ΔH = ΔE + ΔnRT, or ΔE = ΔH − ΔnRT. Δn = (1 − 2) = −1, R = 2 × 10−3 kcal mol−1 K−1 and T = (25 + 273) = 298 K.
ΔE = −41.7 − (−1)(2 × 10−3)(298) = −41.7 + 0.596 = −41.104 kcal.
Teacher's Note: Hess's law gives ΔH at constant pressure; convert to constant volume with ΔE = ΔH − ΔnRT, Δn = −1.
Exam Note: Answer asked at constant volume: give ΔE.
Example 44. Determine the heat of transformation of C(diamond) → C(graphite) from the following data: C(diamond) + O2(g) → CO2(g) … (i) (ΔH = −94.5 kcal); C(graphite) + O2(g) → CO2(g) … (ii) (ΔH = −94.0 kcal)
Solution. Subtracting eq. (ii) from (i), the required equation is obtained: ΔH(transformation) = −94.5 − (−94.0) = −94.5 + 94.0 = −0.5 kcal.
Teacher's Note: Subtract the graphite combustion from the diamond combustion; the common CO2 cancels.
Exam Note: Negative sign shows graphite is more stable.
Example 45. Methanol can be prepared synthetically by heating carbon monoxide and hydrogen gases under pressure in the presence of a catalyst. The reaction is CO(g) + 2H2(g) → CH3OH(l). Determine the enthalpy of this reaction by an appropriate combination of the following data: C(graphite) + ½O2(g) → CO(g) … (i) (ΔH = −110.5 kJ mol−1); C(graphite) + O2(g) → CO2(g) … (ii) (ΔH = −393.5 kJ mol−1); H2(g) + ½O2(g) → H2O(l) … (iii) (ΔH = −285.9 kJ mol−1); CH3OH(l) + (3/2)O2(g) → CO2(g) + 2H2O(l) … (iv) (ΔH = −726.6 kJ mol−1)
Solution. The required equation can be obtained as: −eq. (i) + 2 eq. (iii) + eq. (ii) − eq. (iv), giving CO(g) + 2H2(g) → CH3OH(l).
So, ΔH = 110.5 − 571.8 − 393.5 + 726.6 = −128.2 kJ mol−1.
Teacher's Note: Reverse (i) and (iv) so CO is a reactant and methanol a product, then add.
Exam Note: Reversed equations change sign of ΔH.
Example 46. How much heat will be required to make 2 kg of calcium carbide (CaC2) according to the following reaction? CaO(s) + 3C(s) → CaC2(s) + CO(g). The heats of formation of CaO(s), CaC2(s) and CO(g) are −151.6, −14.2 and −26.4 kcal respectively.
Solution. ΔH = ΣΔH°f(products) − ΣΔH°f(reactants) = [ΔH°f(CaC2) + ΔH°f(CO)] − [ΔH°f(CaO) + 3ΔH°f(C)] = [−14.2 − 26.4] − [−151.6 + 3 × 0] = −40.6 + 151.6 = 111.0 kcal.
For formation of 64 g of CaC2, 111.0 kcal of heat is required. So heat required for making 2000 g of CaC2 = (111.0/64) × 2000 = 3468.75 kcal.
Teacher's Note: Reaction ΔH per mole CaC2 (64 g), then scale to 2000 g.
Exam Note: Positive ΔH: heat absorbed; scale by mass.
Some Solved Examples (Bond Energy)
Example 47. Calculate the ΔH of the reaction CH2Cl2(g) → C(s) + 2H(g) + 2Cl(g) [H–C(H)(Cl)–Cl]. Bond energy for C–H bond and C–Cl bond are 415 kJ and 326 kJ respectively.
Solution. ΔH = sum of bond energies of reactants − sum of bond energies of products = [2 × (C–H) + 2 × (C–Cl)] − 0 (all the products are free atoms) = 2 × 415 + 2 × 326 = 830 + 652 = 1482 kJ.
Teacher's Note: Breaking all bonds into free atoms: sum the bond energies of reactant only.
Exam Note: Count each bond type in the molecule.
Example 48. Calculate the enthalpy of the following reaction: H2C=CH2(g) + H2(g) → CH3–CH3(g). The bond energies of C–H, C–C, C=C and H–H are 99, 83, 147 and 104 kcal respectively.
Solution. The reaction is H2C=CH2(g) + H–H(g) → H3C–CH3(g); ΔH = ?
ΔH = sum of bond energies of reactants − sum of bond energies of products = [ΔH(C=C) + 4 × ΔH(C–H) + ΔH(H–H)] − [ΔH(C–C) + 6 × ΔH(C–H)] = (147 + 4 × 99 + 104) − (83 + 6 × 99) = −30 kcal.
Teacher's Note: Only bonds that change count: one C=C and H–H broken; one C–C and two C–H formed.
Exam Note: C–H bonds cancel; the answer is −30 kcal.
Example 49. The bond dissociation energies of gaseous H2, Cl2 and HCl are 104, 58 and 103 kcal mol−1 respectively. Calculate the enthalpy of formation of HCl(g).
Solution. The required equation is ½H2(g) + ½Cl2(g) → HCl(g); ΔH = ?
ΔH = [½ ΔH(H–H) + ½ ΔH(Cl–Cl)] − [ΔH(H–Cl)] = ½ × 104 + ½ × 58 − 103 = −22 kcal mol−1.
Teacher's Note: Formation of one mole HCl needs half a mole each of H2 and Cl2.
Exam Note: Use half-mole bond energies.
Example 50. Calculate the enthalpy of formation of ammonia from the following bond energy data: (N–H) bond = 389 kJ mol−1; (H–H) bond = 435 kJ mol−1 and (N≡N) bond = 945.36 kJ mol−1.
Solution. N≡N + 3(H–H) → 2 NH3 (three N–H bonds each); ΔH = ?
ΔH = [ΔH(N≡N) + 3 × ΔH(H–H)] − [6 × ΔH(N–H)] = 945.36 + 3 × 435.0 − 6 × 389.0 = −83.64 kJ.
Heat of formation of NH3 = ΔH/2 = −83.64/2 = −41.82 kJ mol−1.
Teacher's Note: The equation gives 2 mole NH3 with six N–H bonds; divide by 2 for one mole.
Exam Note: Divide by 2 for formation of one mole.
Example 51. Calculate the resonance energy of N2O from the following data: ΔH°f of N2O = 82 kJ mol−1. Bond energy of N≡N, N=N, O=O and N=O bonds is 946, 418, 498 and 607 kJ mol−1 respectively. (IIT 1991)
Solution. N≡N(g) + ½(O=O) → N=N=O(g)
ΔHf(N2O) calculated = [ΔH(N≡N) + ½ ΔH(O=O)] − [ΔH(N=O) + ΔH(N=N)] = (946 + ½ × 498) − (607 + 418) = 946 + 249 − 607 − 418 = 1195 − 1025 = 170 kJ mol−1.
Resonance energy = observed heat of formation − calculated heat of formation = 82 − 170 = −88 kJ mol−1 (i.e. N2O is more stable than the Kekulé-type structure by 88 kJ mol−1).
Teacher's Note: Resonance energy is observed minus bond-energy-calculated ΔHf; negative means extra stability.
Exam Note: Quote magnitude 88 kJ mol−1 with sign meaning.
Example 52. The enthalpies for the following reactions at 25°C are given: ½H2(g) + ½O2(g) → OH(g); ΔH = 10.06 kcal; H2(g) → 2H(g); ΔH = 104.18 kcal; O2(g) → 2O(g); ΔH = 118.32 kcal. Calculate the O–H bond energy in the OH group.
Solution. Required equation is H(g) + O(g) → O–H(g); ΔH = ?
Given: ½H2(g) + ½O2(g) → OH(g); ΔH = +10.06 kcal; H(g) → ½H2(g); ΔH = −52.09 kcal; O(g) → ½O2(g); ΔH = −59.16 kcal.
Adding: H(g) + O(g) → OH(g); ΔH = −101.19 kcal. So the O–H bond energy is 101.19 kcal.
Teacher's Note: Halve and reverse the atomisation equations, then add to the OH formation equation.
Exam Note: Bond energy is the magnitude, positive.
Example 53. The standard molar enthalpies of formation of cyclohexane (l) and benzene (l) at 25°C are −156 and +49 kJ mol−1 respectively. The standard enthalpy of hydrogenation of cyclohexene (l) at 25°C is −119 kJ mol−1. Use these data to estimate the magnitude of resonance energy of benzene. (IIT 1996)
Solution. Cyclohexene(l) + H2(g) → Cyclohexane(l); ΔH = −119 kJ. Enthalpy of formation of cyclohexane(l) = −156 kJ mol−1. So enthalpy of formation of cyclohexene = −156 − (−119) kJ = −37 kJ mol−1.
Since ΔH of hydrogenation of cyclohexene is −119 kJ mol−1, we can say that for every double bond the energy decreases by 119 kJ mol−1; for three double bonds (as in the benzene ring) the energy required = 3 × 119 = 357 kJ mol−1.
Hence theoretical ΔHf for benzene = (357 − 156) = 201 kJ mol−1.
Resonance energy = theoretical ΔHf − observed ΔHf = (201 − 49) = 152 kJ mol−1.
Teacher's Note: Three isolated double bonds would hydrogenate with 3 × 119 kJ; compare with benzene's real ΔHf.
Exam Note: Resonance energy = theoretical − observed ΔHf.
Example 54. Calculate heat of combustion of ethene: H2C=CH2 + 3 O=O → 2 O=C=O + 2 H–O–H, from bond energy data: C=C, C–H, O=O, C=O, O–H; BE kJ mol−1: 619, 414, 499, 724, 460.
Solution. ΔH = sum of bond energies of reactants − sum of bond energies of products = [ΔH(C=C) + 4ΔH(C–H) + 3 × ΔH(O=O)] − [4 × ΔH(C=O) + 4 × ΔH(O–H)] = [619 + 4 × 414 + 3 × 499] − [4 × 724 + 4 × 460] = −964 kJ mol−1.
Teacher's Note: Two CO2 contain four C=O; two H2O contain four O–H bonds.
Exam Note: Count bonds broken and formed carefully.
Example 55. Using the data (all values are in kilocalorie per mole at 25°C) given below, calculate the bond energy of C–C and C–H bonds. ΔH°combustion of ethane = −372.0; ΔH°combustion of propane = −530.0; ΔH° for C(graphite) → C(g) = +172.0; bond energy of H–H bond = +104.0; ΔH°f of H2O(l) = −68.0; ΔH°f of CO2(g) = −94.0
Solution. C2H6(g) + (7/2)O2 → 2CO2(g) + 3H2O(l); ΔH = −372.0. ΔH°f(C2H6) = 2 × (−94.0) + 3 × (−68.0) + 372.0 = −20 kcal.
C3H8(g) + 5O2 → 3CO2(g) + 4H2O(l); ΔH = −530.0. ΔH°f(C3H8) = 3 × (−94.0) + 4 × (−68.0) + 530.0 = −24 kcal.
2C(s) + 3H2(g) → C2H6(g); ΔH = −20.0; 2C(g) → 2C(s); ΔH = −344.0; 6H(g) → 3H2(g); ΔH = −312.0. Adding: 2C(g) + 6H(g) → C2H6(g); ΔH = −676 kcal. So enthalpy of formation of 6 C–H bonds and one C–C bond is −676.0 kcal.
3C(s) + 4H2(g) → C3H8(g); ΔH = −24.0; 3C(g) → 3C(s); ΔH = −516.0; 8H(g) → 4H2(g); ΔH = −416.0. Adding: 3C(g) + 8H(g) → C3H8(g); ΔH = −956.0 kcal. So enthalpy of formation of 8 C–H and 2 C–C bonds is −956 kcal.
Let the bond energy of C–C be x and of C–H be y kcal. In ethane x + 6y = 676; in propane 2x + 8y = 956. On solving, x = 82 and y = 99. Thus bond energy of C–C = 82 kcal and bond energy of C–H = 99 kcal.
Teacher's Note: Atomise via formation enthalpies of ethane and propane, then solve two simultaneous bond-count equations.
Exam Note: Ethane has 1 C–C, 6 C–H; propane 2 C–C, 8 C–H.
Example 56. Using the bond enthalpy data given below, calculate the enthalpy of formation of acetone (g). Bond energy C–H = 413.4 kJ mol−1; bond energy C–C = 347.0 kJ mol−1; bond energy C=O = 728.0 kJ mol−1; bond energy O=O = 495.0 kJ mol−1; bond energy H–H = 435.8 kJ mol−1; ΔHsub C(s) = 718.4 kJ mol−1
Solution. 3C(g) + 6H(g) + O(g) → CH3COCH3(g). In acetone, six C–H bonds, one C=O bond and two C–C bonds are present. Energy released in the formation of these bonds is = −6 × 413.4 − 728.0 − 2 × 347.0 = −3902.4 kJ mol−1.
The equation of formation of acetone is 3C(graphite) + 3H2(g) + ½O2(g) → CH3COCH3(g); ΔH = ?
It is obtained by adding: 3C(g) + 6H(g) + O(g) → CH3COCH3(g); ΔH = −3902.4 kJ mol−1; 3C(s) → 3C(g); ΔH = 2155.2 kJ mol−1; 3H2(g) → 6H(g); ΔH = 1307.4 kJ mol−1; ½O2(g) → O(g); ΔH = 247.5 kJ mol−1.
Sum: 3C(s) + 3H2(g) + ½O2(g) → CH3COCH3(g); ΔH = −192.3 kJ mol−1.
Teacher's Note: Atomise elements (sublimation plus bond breaking), then release bond-formation energy of acetone.
Exam Note: Acetone: 6 C–H, 2 C–C, 1 C=O.
Illustrations of Objective Questions (continued)
Objective Question 7. ΔH°f 298 K of methanol is given by the chemical equation: (a) CH4(g) + ½O2(g) → CH3OH(g) (b) C(graphite) + ½O2(g) + 2H2(g) → CH3OH(l) (c) C(diamond) + ½O2(g) + 2H2(g) → CH3OH(l) (d) CO(g) + 2H2(g) → CH3OH(l) (AIIMS 2005)
Solution. Answer (b). In the process of formation, the compound must be formed from constituent elements in their standard state (graphite for carbon, liquid methanol at 298 K).
Teacher's Note: Formation reaction: elements in standard states give one mole of compound.
Exam Note: Standard state of carbon is graphite.
Objective Question 8. The standard molar heat of formation of ethane, CO2 and H2O(l) are respectively −21.1, −94.1 and −68.3 kcal. The standard molar heat of combustion of ethane will be: (a) −372 kcal (b) −240 kcal (c) 162 kcal (d) 183.5 kcal
Solution. Answer (a). C2H6 + (7/2)O2 → 2CO2(g) + 3H2O(l); ΔH = 2ΔHf(CO2) + 3ΔHf(H2O) − ΔHf(C2H6) = 2(−94.1) + 3(−68.3) − (−21.1) = −372 kcal.
Teacher's Note: Products minus reactants for one mole ethane burnt in 7/2 O2.
Exam Note: Coefficients 2 and 3 for CO2 and H2O.
Objective Question 9. When ethyne is passed through a red hot tube, then formation of benzene takes place: ΔH°f(C2H2)(g) = 230 kJ mol−1, ΔH°f(C6H6)(g) = 85 kJ mol−1. Calculate the standard heat of trimerisation of ethyne to benzene. 3C2H2(g) → C6H6(g). (a) 205 kJ mol−1 (b) 605 kJ mol−1 (c) −605 kJ mol−1 (d) −205 kJ mol−1
Solution. Answer (c). ΔHreaction = ΔHf(C6H6) − 3ΔHf(C2H2) = 85 − 3(230) = −605 kJ mol−1.
Teacher's Note: Three moles of ethyne, so multiply its ΔHf by 3.
Exam Note: Do not forget the factor 3.
Objective Question 10. F2(g) + 2HCl(g) → 2HF(g) + Cl2(g); ΔH° = −352.18 kJ; ΔH°f(HF) = −268.3 kJ. The heat of formation of HCl will be: (a) −22 kJ mol−1 (b) 88 kJ (c) −92.21 kJ mol−1 (d) −183.8 kJ mol−1
Solution. Answer (c). ΔH°reaction = 2ΔH°f(HF) − 2ΔH°f(HCl): −352.18 = 2 × (−268.3) − 2x, so 2x = 2(−268.3) + 352.18 and x = −92.21 kJ mol−1.
Teacher's Note: Elements F2 and Cl2 have zero ΔHf; solve for unknown ΔHf(HCl).
Exam Note: Divide by 2 for one mole HCl.
Objective Question 11. Given two processes: ½P4(s) + 3Cl2(g) → 2PCl3(l); ΔH = −635 kJ; PCl3(l) + Cl2(g) → PCl5(s); ΔH = −137 kJ. The value of ΔHf of PCl5 is: (a) 454.5 kJ mol−1 (b) −454.5 kJ (c) −772 kJ mol−1 (d) −498 kJ mol−1
Solution. Answer (b). ¼P4(s) + (3/2)Cl2(g) → PCl3(l); ΔH = −635/2 kJ (half of the first equation). PCl3(l) + Cl2(g) → PCl5(s); ΔH = −137 kJ. On adding: ¼P4(s) + (5/2)Cl2(g) → PCl5(s); ΔH = −454.5 kJ.
Teacher's Note: Halve the first equation to get one mole PCl3, then add the second.
Exam Note: Halving the equation halves ΔH.
Objective Question 12. The enthalpy of combustion at 25°C of H2, cyclohexane (C6H12) and cyclohexene (C6H10) are −241, −3920 and −3800 kJ/mol respectively. The heat of hydrogenation of cyclohexene is: (a) −121 kJ/mol (b) +121 kJ/mol (c) −242 kJ/mol (d) +242 kJ/mol [CBSE (Med.) 2006]
Solution. Answer (a). H2(g) + ½O2(g) → H2O(l) (ΔH = −241 kJ) … (i); C6H10 + (17/2)O2(g) → 6CO2(g) + 5H2O(l) (ΔH = −3800 kJ) … (ii); C6H12 + 9O2(g) → 6CO2(g) + 6H2O(l) (ΔH = −3920 kJ) … (iii). Eq. (i) + eq. (ii) − eq. (iii) gives C6H10 + H2 → C6H12: ΔH = −241 − 3800 − (−3920) = −121 kJ.
Teacher's Note: Hydrogenation = combustion of cyclohexene + H2 minus combustion of cyclohexane.
Exam Note: Hess combination: (i) + (ii) − (iii).
Objective Question 13. Given that: 2Fe(s) + (3/2)O2(g) → Fe2O3(s) (ΔH = −193.4 kJ) … (i); Mg(s) + ½O2(g) → MgO(s) (ΔH = −140.2 kJ) … (ii). What is ΔH of the reaction 3Mg + Fe2O3 → 3MgO + 2Fe? (a) −227.2 kJ (b) −272.3 kJ (c) 227.2 kJ (d) 272.3 kJ [JEE (Orissa) 2005]
Solution. Answer (a). Subtracting the 1st equation from the 2nd multiplied by 3: 3Mg(s) + (3/2)O2(g) → 3MgO(s) (ΔH = −420.6 kJ) … (ii); subtracting eq. (i) from (ii): 3Mg(s) + Fe2O3 → 3MgO + 2Fe; ΔH = −420.6 − (−193.4) = −227.2 kJ.
Teacher's Note: Multiply the MgO formation by 3 and subtract the Fe2O3 formation.
Exam Note: Multiply ΔH by 3 when equation is tripled.
Objective Question 14. Given that: 2C(s) + 2O2(g) → 2CO2(g) (ΔH = −787 kJ) … (i); H2(g) + ½O2(g) → H2O(l) (ΔH = −286 kJ) … (ii); C2H2(g) + (5/2)O2(g) → 2CO2(g) + H2O(l) (ΔH = −1301 kJ) … (iii). Heat of formation of acetylene is: (a) −1802 kJ (b) +1802 kJ (c) −800 kJ (d) +228 kJ [JEE (Orissa) 2005]
Solution. Answer (d). Required equation: 2C(s) + H2(g) → C2H2(g). Eq. (i) + eq. (ii) − eq. (iii) gives ΔH = (−787) + (−286) − (−1301) = +228 kJ.
Teacher's Note: Add carbon and hydrogen combustions, subtract acetylene combustion to get formation.
Exam Note: Reverse (iii) so C2H2 is the product.
Objective Question 15. The enthalpy changes for two reactions are given by the equations: 2Cr(s) + (3/2)O2(g) → Cr2O3(s); ΔH = −1130 kJ; C(s) + ½O2(g) → CO(g); ΔH = −110 kJ. What is the enthalpy change in kJ for the following reaction? 3C(s) + Cr2O3(s) → 2Cr(s) + 3CO(g). (a) −1460 kJ (b) −800 kJ (c) +800 kJ (d) +1020 kJ (e) +1460 kJ
Solution. Answer (c). 3C(s) + (3/2)O2(g) → 3CO(g); ΔH = −330 kJ. Cr2O3(s) → 2Cr(s) + (3/2)O2(g); ΔH = +1130 kJ. On adding: 3C(s) + Cr2O3(s) → 2Cr(s) + 3CO(g); ΔH = +800 kJ.
Teacher's Note: Triple the CO equation and reverse the oxide formation, then add.
Exam Note: Reversing flips sign; tripling multiplies ΔH.
Objective Question 16. The enthalpy change ΔH for the neutralisation of 1 M HCl by caustic potash in dilute solution at 298 K is: (a) 68 kJ (b) 65 kJ (c) 57.3 kJ (d) 50 kJ (DPMT 2005)
Solution. Answer (c). Since both HCl and KOH are strong, 57.3 kJ heat will be released.
Teacher's Note: Strong acid with strong base: net H+ + OH− → H2O, about 57.3 kJ.
Exam Note: Magnitude 57.3 kJ per mole of water.
Objective Question 17. Enthalpy of neutralisation of the reaction between CH3COOH(aq.) and NaOH(aq.) is −13.2 kcal eq−1 and that of the reaction between H2SO4(aq.) and KOH(aq.) is −13.7 kcal eq−1. The enthalpy of dissociation of CH3COOH(aq.) is: (a) −0.5 kcal eq−1 (b) +0.5 kcal eq−1 (c) −26.9 kcal eq−1 (d) +13.45 kcal eq−1
Solution. Answer (b). Dissociation enthalpy of CH3COOH = 13.7 − 13.2 = 0.5 kcal eq−1. Thus 0.5 kcal eq−1 heat will be used to dissociate CH3COOH completely, so ΔHionisation = +0.5 kcal eq−1.
Teacher's Note: Weak-acid neutralisation is less exothermic by the energy spent on ionisation.
Exam Note: Difference of strong and weak acid values.
Objective Question 18. Calculate the enthalpy change when 50 mL of 0.01 M Ca(OH)2 reacts with 25 mL of 0.01 M HCl. Given that ΔH° neutralisation of a strong acid and a strong base is 140 kcal mol−1. (a) 14 kcal (b) 35 cal (c) 10 cal (d) 7.5 cal
Solution. Answer (b). Number of moles of HCl = MV/1000 = (0.01 × 25)/1000 = 25 × 10−5; HCl → H+ + Cl−, so n(H+) = 25 × 10−5. Number of moles of Ca(OH)2 = (0.01 × 50)/1000 = 50 × 10−5, so n(OH−) = 2 × 50 × 10−5 = 10−3. In the process of neutralisation 25 × 10−5 mole H+ will be completely neutralised. ∴ ΔH = 140 × 25 × 10−5 kcal = 0.035 kcal = 35 cal.
Teacher's Note: H+ is limiting (25 × 10−5 mol); heat is the given molar value times that.
Exam Note: Find the limiting ion before multiplying.
Objective Question 19. Equal volumes of 1 M HCl and 1 M H2SO4 are neutralised by 1 M NaOH solution and x and y kJ/equivalent of heat are liberated respectively. Which of the following relations is correct? (a) x = 2y (b) x = 3y (c) x = 4y (d) x = ½y
Solution. Answer (d) (book answer; to be read as the heat liberated by the equal volumes taken). Since H2SO4 gives 2 moles H+ while HCl gives 1 mole H+ from 1 mole after ionisation, H2SO4 will release double the amount of heat as compared to HCl, i.e. y = 2x or x = y/2. (Per gram-equivalent the two heats would be equal, about 57 kJ; the printed options only fit the equal-volume reading.)
Teacher's Note: Equal volumes of 1 M acids: H2SO4 supplies twice the H+, so twice the heat.
Exam Note: Compare moles of H+, not molarity.
Objective Question 20. Which of the following acid will release maximum amount of heat when completely neutralised by strong base NaOH? (a) 1 M HCl (b) 1 M HNO3 (c) 1 M HClO4 (d) 1 M H2SO4
Solution. Answer (d). Ionisation of H2SO4 gives double amount of H+ ions as compared to other acids: H2SO4 → 2H+ + SO42−.
Teacher's Note: Heat depends on moles of H+ neutralised; dibasic acid gives two.
Exam Note: Basicity decides heat for equal molarity.
Objective Question 21. Determine the heat of the following reaction: FeO(s) + Fe2O3(s) → Fe3O4(s). Given informations: 2Fe(s) + O2(g) → 2FeO(s); ΔH° = −544 kJ; 4Fe(s) + 3O2(g) → 2Fe2O3(s); ΔH° = −1648.4 kJ; Fe3O4(s) → 3Fe(s) + 2O2(g); ΔH° = +1118.4 kJ. (a) −1074 kJ (b) −22.2 kJ (c) +249.8 kJ (d) +2214.6 kJ
Solution. Answer (b). 2FeO(s) → 2Fe(s) + O2(g); ΔH° = +544 kJ. 2Fe2O3(s) → 4Fe(s) + 3O2(g); ΔH° = +1648.4 kJ. 6Fe(s) + 4O2(g) → 2Fe3O4(s); ΔH° = −2 × 1118.4 kJ. On adding: 2FeO(s) + 2Fe2O3(s) → 2Fe3O4(s); ΔH° = −44.4 kJ. ∴ FeO(s) + Fe2O3(s) → Fe3O4(s); ΔH° = −22.2 kJ.
Teacher's Note: Reverse the two oxide formations, reverse the Fe3O4 decomposition, add, halve.
Exam Note: Halve at the end for one mole Fe3O4.
Objective Question 22. Calculate the enthalpy of formation of ΔHf for C2H5OH from tabulated data and its heat of combustion as represented by the following equations: H2(g) + ½O2(g) → H2O(g) (ΔH° = −241.8 kJ mol−1) … (i); C(s) + O2(g) → CO2(g) (ΔH° = −393.5 kJ mol−1) … (ii); C2H5OH(l) + 3O2(g) → 3H2O(g) + 2CO2(g) (ΔH° = −1234.7 kJ) … (iii). (a) −2747.1 kJ mol−1 (b) −277.7 kJ mol−1 (c) 277.7 kJ mol−1 (d) 2747.1 kJ mol−1
Solution. Answer (b). Required equation: 2C(s) + 3H2(g) + ½O2(g) → C2H5OH(l). 2C(s) + 2O2(g) → 2CO2(g); ΔH° = −2 × 393.5 kJ. 3H2(g) + (3/2)O2(g) → 3H2O(g); ΔH° = −3 × 241.8 kJ. 3H2O + 2CO2 → C2H5OH(l) + 3O2(g); ΔH° = +1234.7 kJ. On adding, ΔH° = −787 − 725.4 + 1234.7 = −277.7 kJ mol−1.
Teacher's Note: Formation of ethanol: 2 CO2 and 3 H2O formation plus reversed ethanol combustion.
Exam Note: Multiply (ii) by 2, (i) by 3, reverse (iii).
Objective Question 23. Which of the following methods for calculation of heat of a reaction is not correct? (a) ΔHreaction = ΣΔHf products − ΣΔHf reactants (b) ΔHreaction = Σ(BE)reactants − Σ(BE)products (c) ΔHreaction = ΣΔHcomb. (reactants) − ΣΔHcomb. (products) (d) ΔHreaction = ΣΔHsolution (reactants) − ΣΔHsolution (products)
Solution. Answer (d). Formation enthalpies give products minus reactants (a); bond energies give reactants minus products (b); combustion enthalpies give reactants minus products (c). Heats of solution cannot be combined this way to give the heat of a reaction, so (d) is not a correct general method.
Teacher's Note: Formation: products − reactants; bond energy and combustion: reactants − products.
Exam Note: Check which side is subtracted in each method.
Objective Question 24. Heat of combustion of diamond and graphite are −94.5 kcal and −94 kcal/mol respectively. What will be the heat of transition from diamond to graphite? (a) −0.5 kcal (b) +0.5 kcal (c) 1 kcal (d) −1 kcal
Solution. Corrected: answer (a), −0.5 kcal (the book prints (b)). ΔH = ΔHcomb(diamond) − ΔHcomb(graphite) = −94.5 − (−94) = −0.5 kcal. Diamond → graphite is exothermic, so graphite is more stable.
Teacher's Note: Transition enthalpy equals combustion of reactant form minus combustion of product form.
Exam Note: Sign: diamond to graphite releases heat.
Objective Question 25. For the reaction, 3N2O(g) + 2NH3(g) → 4N2(g) + 3H2O(g); ΔH° = −879.6 kJ. If ΔH°f[NH3(g)] = −45.9 kJ mol−1; ΔH°f[H2O(g)] = −241.8 kJ mol−1, then ΔH°f[N2O(g)] will be: (a) +246 kJ (b) +82 kJ (c) −82 kJ (d) −246 kJ
Solution. Answer (b). ΔH°reaction = ΣΔH°f(products) − ΣΔH°f(reactants) = 4ΔH°f[N2] + 3ΔH°f[H2O] − (3ΔH°f[N2O] + 2ΔH°f[NH3]). So −879.6 = 0 + 3(−241.8) − 3x − 2(−45.9), giving −3x = −246 and ΔH°f[N2O] = +82 kJ mol−1.
Teacher's Note: N2 is an element (zero); solve for unknown ΔHf with stoichiometric multipliers.
Exam Note: Multiply ΔHf by coefficients 3 and 2.
Objective Question 26. The bond energies of C=C and C–C at 298 K are 590 and 331 kJ mol−1 respectively. The enthalpy of polymerisation per mole of ethylene is: (a) −70 kJ (b) −72 kJ (c) 72 kJ (d) −68 kJ
Solution. Answer (b). The polymerisation of ethene may be represented as nCH2=CH2 → [–CH2–CH2–]n; one mole of C=C bond is decomposed and two moles of C–C bonds are formed per mole of ethylene. ∴ ΔH = 590 − 2 × 331 = −72 kJ per mol of ethylene.
Teacher's Note: Per ethylene: one C=C breaks, two C–C bonds form (one new per carbon).
Exam Note: Bonds formed minus broken, per mole monomer.
Objective Question 27. For the reaction, 2H2(g) + O2(g) → 2H2O(g); ΔH = −571 kJ; bond energy of (H–H) = 435 kJ; of (O=O) = 498 kJ; then calculate the average bond energy of (O–H) bond using the above data. (a) 484 kJ (b) −484 kJ (c) 271 kJ (d) −271 kJ (DCE 2005)
Solution. Answer (a). 2(H–H) + O=O → 2(H–O–H); ΔH = Σ(BE)reactants − Σ(BE)products: −571 = [2 × 435 + 498] − 4 × (BE)O–H, so (BE)O–H = (2 × 435 + 498 + 571)/4 = 1939/4 ≈ 484 kJ.
Teacher's Note: Two H2O contain four O–H bonds; solve the bond-energy balance for one.
Exam Note: Divide by 4, the number of O–H bonds.
Objective Question 28. Use the bond energies in the table to estimate ΔH for this reaction: CH2=CH2 + Cl2 → ClCH2–CH2Cl. Bond energy (kJ/mol): C–C 347; C=C 612; C–Cl 331; C–H 414; Cl–Cl 243. (a) ΔH = −684 kJ (b) ΔH = −154 kJ (c) ΔH = +89 kJ (d) ΔH = +177 kJ
Solution. Answer (b). ΔHreaction = Σ(BE)reactants − Σ(BE)products = [(BE)C=C + 4(BE)C–H + (BE)Cl–Cl] − [4(BE)C–H + 2(BE)C–Cl + (BE)C–C] = [(BE)C=C + (BE)Cl–Cl] − [2(BE)C–Cl + (BE)C–C] = [612 + 243] − [2 × 331 + 347] = −154 kJ.
Teacher's Note: C–H bonds are unchanged and cancel; compare C=C and Cl–Cl broken with C–C and two C–Cl formed.
Exam Note: Cancel unchanged bonds first.
Objective Question 29. Heat of formation of 2 moles of NH3(g) is −90 kJ; bond energies of H–H and N–H bonds are 435 kJ and 390 kJ mol−1 respectively. The value of the bond energy of N≡N will be: (a) −472.5 kJ (b) −945 kJ (c) 472.5 kJ (d) 945 kJ mol−1
Solution. Answer (d). N≡N + 3(H–H) → 2NH3 (six N–H bonds); ΔH = −90 kJ. ΔHreaction = Σ(BE)reactants − Σ(BE)products: −90 = [(BE)N≡N + 3(BE)H–H] − [6(BE)N–H] = x + 3 × 435 − 6 × 390, so x = 945 kJ mol−1.
Teacher's Note: Two moles NH3 have six N–H bonds; rearrange the bond-energy equation for x.
Exam Note: Bond energy is positive; check units.
Objective Question 30. If values of ΔH°f of ICl(g), Cl(g) and I(g) are respectively 17.57, 121.34, 106.96 J mol−1. The value of I–Cl (bond energy) in J mol−1 is: (a) 17.57 (b) 210.73 (c) 35.15 (d) 106.96
Solution. Answer (b). The process will be I(g) + Cl(g) → I–Cl(g); ΔH° = 17.57 J mol−1. ΔH = heat of atomisation of I(g) and Cl(g) − bond energy of I–Cl bond: 17.57 = 121.34 + 106.96 − x, so x = 210.73 J mol−1 (units as printed; the data are in the book's units).
Teacher's Note: Bond energy = heats of formation of the atoms minus ΔHf of the molecule.
Exam Note: Atoms' ΔHf sum less ΔHf(ICl).
Objective Question 31. Calculate the ΔH in joules for: C(graphite) → C(diamond) from the following data: C(graphite) + O2(g) → CO2(g); ΔH° = −393.5 kJ; C(diamond) + O2(g) → CO2(g); ΔH° = −395.4 kJ. (a) 1900 (b) −788.9 × 103 (c) 190000 (d) +788.9 × 103 [CET (J&K) 2006]
Solution. Answer (a). C(graphite) + O2(g) → CO2(g); ΔH° = −393.5 kJ. CO2(g) → C(diamond) + O2(g); ΔH° = +395.4 kJ. On adding: C(graphite) → C(diamond); ΔH° = +1900 J = +1.9 kJ.
Teacher's Note: Subtract the diamond combustion from the graphite combustion; convert kJ to J.
Exam Note: Answer asked in joules: 1.9 kJ = 1900 J.
Objective Question 32. The enthalpy changes for the following processes are listed below: Cl2(g) → 2Cl(g); ΔH = 242.3 kJ mol−1; I2(g) → 2I(g); ΔH = 151.0 kJ mol−1; ICl(g) → I(g) + Cl(g); ΔH = 211.3 kJ mol−1; I2(s) → I2(g); ΔH = 62.76 kJ mol−1. Given that the standard states for iodine and chlorine are I2(s) and Cl2(g), the standard enthalpy of formation for ICl(g) is: (a) −14.6 kJ mol−1 (b) −16.8 kJ mol−1 (c) +16.8 kJ mol−1 (d) +244.8 kJ mol−1 (AIEEE 2006)
Solution. Answer (c). The reaction is ½I2(s) + ½Cl2(g) → ICl(g). ΔfH(I–Cl) = [½ΔH(I2(s)→I2(g)) + ½ΔH(I–I) + ½ΔH(Cl–Cl)] − [ΔH(I–Cl)] = [½ × 62.76 + ½ × 151 + ½ × 242.3] − [211.3] = 16.73 kJ mol−1, nearest the option +16.8 kJ mol−1.
Teacher's Note: Build ICl from solid iodine and chlorine gas: sublime, atomise, then subtract the ICl bond enthalpy.
Exam Note: Use half-mole amounts of I2 and Cl2.
Objective Question 33. Given that: 2C(s) + 2O2(g) → 2CO2(g) (ΔH = −787 kJ) … (i); H2(g) + ½O2(g) → H2O(l) (ΔH = −286 kJ) … (ii); C2H2(g) + (5/2)O2(g) → 2CO2(g) + H2O(l) (ΔH = −1310 kJ) … (iii). The heat of formation of acetylene is: (a) −1802 kJ mol−1 (b) +1802 kJ mol−1 (c) +237 kJ mol−1 (d) −800 kJ mol−1 (VITEEE 2007)
Solution. Answer (c). Required equation: 2C(s) + H2(g) → C2H2(g). It can be obtained by adding eqs. (i) and (ii) and then subtracting eq. (iii) from it. Heat of formation of acetylene = (−787) + (−286) − (−1310) = +237 kJ mol−1.
Teacher's Note: Add carbon and hydrogen combustions, subtract acetylene combustion to get formation.
Exam Note: Compare with Q14: only the −1310 value differs.
Determination of Lattice Energy (Born-Haber Cycle)
Example 57. Calculate the lattice energy for the reaction Li+(g) + Cl−(g) → LiCl(s) from the following data: ΔHsub(Li) = 160.67 kJ mol−1; ½D(Cl2) = 122.17 kJ mol−1; IP(Li) = 520.07 kJ mol−1; EA(Cl) = −365.26 kJ mol−1 and ΔH°f(LiCl) = −401.66 kJ mol−1.
Solution. Applying the equation −Q = ΔHsub + ½D + IP − EA + U and substituting the respective values: −401.66 = 160.67 + 122.17 + 520.07 − 365.26 + U, so U = −839.31 kJ mol−1.
Teacher's Note: Born-Haber cycle: formation enthalpy equals sublimation, ½D, IP, EA and lattice energy.
Exam Note: Write the cycle equation before substituting.
Example 58. When a mole of crystalline sodium chloride is prepared, 410 kJ of heat is produced. The heat of sublimation of sodium metal is 108.8 kJ (printed as 180.8 kJ in the question; the solution uses 108.8). The heat of dissociation of chlorine gas into atoms is 242.7 kJ. The ionisation energy of Na and electron affinity of Cl are 493.7 kJ and −368.2 kJ respectively. Calculate the lattice energy of NaCl.
Solution. Applying the equation −Q = ΔHsub + ½D + IP − EA + U and substituting the respective values: −410 = 108.8 + ½ × 242.7 + 493.7 − 368.2 + U, so U = −765.65 kJ mol−1.
Teacher's Note: Same Born-Haber equation; use half the Cl2 dissociation energy per NaCl.
Exam Note: Halve D for one mole of Cl atoms.
Experimental Determination of the Heat of Reaction
Example 59. 0.5 g of benzoic acid was subjected to combustion in a bomb calorimeter at 15°C when the temperature of the calorimeter system (including water) was found to rise by 0.55°C. Calculate the heat of combustion of benzoic acid (i) at constant volume and (ii) at constant pressure. The thermal capacity of the calorimeter including water was found to be 23.85 kJ.
Solution. (i) Heat of combustion at constant volume, ΔE = heat capacity of calorimeter and its contents × rise in temperature × (mol. mass of compound/mass of compound) = 23.85 × 0.55 × (122/0.5) = 3200.67 kJ, i.e. ΔE = −3200.67 kJ mol−1.
(ii) We know that ΔH = ΔE + ΔnRT. C6H5COOH(s) + (15/2)O2(g) → 7CO2(g) + 3H2O(l); Δn = 7 − 7.5 = −0.5; R = 8.314 × 10−3 kJ K−1 mol−1; T = 288 K.
ΔH = −3200.67 + 8.314 × 10−3 × (−0.5) × 288 = −3200.67 − 1.197 = −3201.867 kJ mol−1.
Teacher's Note: Bomb calorimeter gives ΔE per mole; convert to ΔH with Δn of gases only (7 − 7.5).
Exam Note: Benzoic acid is solid; liquid water excluded from Δn.
Example 60. A sample of 0.16 g CH4 was subjected to combustion at 27°C in a bomb calorimeter. The temperature of the calorimeter system (including water) was found to rise by 0.5°C. Calculate the heat of combustion of methane at (i) constant volume and (ii) constant pressure. The thermal capacity of calorimeter system is 17.7 kJ K−1 and R = 8.314 J K−1 mol−1. (IIT 1998)
Solution. (i) Heat of combustion at constant volume, ΔE = heat capacity of calorimeter system × rise in temperature × (mol. mass of compound/mass of compound) = 17.7 × 0.5 × (16/0.16) = 885, i.e. ΔE = −885 kJ mol−1.
(ii) CH4(g) + 2O2(g) → CO2(g) + 2H2O(l); Δn = 1 − 3 = −2, T = 300 K, R = 8.314 × 10−3 kJ K−1 mol−1. ΔH = ΔE + ΔnRT = −885 + (−2) × 8.314 × 10−3 × 300 = −885 − 4.988 = −889.988 kJ mol−1.
Teacher's Note: Scale the calorimeter heat from 0.16 g to one mole (16 g), then add ΔnRT with Δn = −2.
Exam Note: Heat capacity × ΔT, scaled to molar mass.
Example 61. The heat of combustion of ethane gas is −368 kcal/mol. Assuming that 60% of heat is useful, how many m3 of ethane measured at NTP must be burned to supply heat to convert 50 kg of water at 10°C to steam at 100°C?
Solution. Heat required per gram of water = (90 + 540) cal = 630 cal. Total heat needed for 50 kg of water = 50 × 103 × 630 cal.
As the efficiency is 60%, the actual amount of heat required = (50 × 103 × 630/60) × 100 cal = 52500 kcal.
Number of mole of ethane required to produce 52500 kcal = 52500/368 = 142.663 mole.
Volume of 142.663 mole at NTP = 142.663 × 22.4 = 3195.65 litre ≈ 3.2 m3.
Teacher's Note: Heat to warm water 90 °C plus vaporise, divide by 0.60 efficiency, then moles and 22.4 L each.
Exam Note: Divide by efficiency; convert L to m³.
Step-by-Step OP Tandon Solutions for JEE Math
Access JEE Mathematics Solutions
Access the complete chapter-wise PDF for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 7 Chemical Thermodynamics Thermochemistry Part 1. These structured OP Tandon Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Concept-Driven Math Answers
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Next Steps in Your Mathematics Revision
In addition to these OP Tandon Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.