Narendra Awasthi Solutions Physical Chemistry Chapter 7 Chemical Kinetics Nuclear Chemistry Part 2

Narendra Awasthi Solutions for JEE Chemistry: Chapter 07 Chemical Kinetics Nuclear Chemistry

Explore reliable textbook solutions for Chapter 07 Chemical Kinetics Nuclear Chemistry tailored for JEE learners using Narendra Awasthi methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice JEE Chemistry Solutions: Chapter 07 Chemical Kinetics Nuclear Chemistry

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

Chemical Kinetics and Nuclear Chemistry - Level 2 and Level 3 (Problems in Chemistry)

Level 2

Question 1. The forward rate constant for the elementary reversible gaseous reaction C2H6 ⇌ 2CH3 is 1.57 × 10−3 s−1 at 100 K. What is the rate constant for the backward reaction at this temperature if 10−4 moles of CH3 and 10 moles of C2H6 are present in a 10 litre vessel at equilibrium?
(a) 1.57 × 109 L mol−1 s−1
(b) 1.57 × 1010 L mol−1 s−1
(c) 1.57 × 1011 L mol−1 s−1
(d) 1.57 × 107 L mol−1 s−1

Solution. Answer: (d). [CH3] = 10−4/10 = 10−5 M and [C2H6] = 10/10 = 1 M. Keq = kf/kb = [CH3]2/[C2H6] = (10−5)2/1 = 10−10 M. So kb = 1.57 × 10−3/10−10 = 1.57 × 107 L mol−1 s−1.

Teacher's Note: At equilibrium forward rate equals backward rate; convert moles to molarity before using K.

Exam Note: Units of kb follow second order.

Question 2. For a hypothetical reaction, A + 3B → P, ΔH = −2x kJ/mole of A, and M → 2Q + R, ΔH = +x kJ/mole of M. If these reactions are carried out simultaneously in a reactor such that temperature is not changing, and the rate of disappearance of B is y M s−1, then the rate of formation (in M s−1) of Q is:
(a) (2/3)y
(b) (3/2)y
(c) (4/3)y
(d) (3/4)y

Solution. Answer: (c). Rate of the first reaction r1 = y/3 (3 mol B per mol A). For constant temperature the heat released must equal the heat absorbed: 2x·r1 = x·r2, so r2 = 2r1 = 2y/3. Rate of formation of Q = 2r2 = 4y/3.

Teacher's Note: Zero net heat flow links the two reaction rates; then use stoichiometry for Q.

Exam Note: Equate heat released and absorbed first.

Question 3. The kinetic data for the given reaction A(g) + 2B(g) —k→ C(g) is provided in the following table for three experiments at 300 K:
Ex. No.[A]/M[B]/MInitial rate (M s−1)
10.010.016.930 × 10−6
20.020.011.386 × 10−5
30.020.021.386 × 10−5
In another experiment starting with initial concentrations of 0.5 and 1 M respectively for A and B at 300 K, find the rate of reaction after 50 minutes from start of experiment (in M/s).
(a) 6.93 × 10−4
(b) 0.25 × 10−7
(c) 4.33 × 10−5
(d) 3.46 × 10−4

Solution. Answer: (c). Experiments 1 and 2: doubling [A] doubles the rate, so order in A is 1. Experiments 2 and 3: doubling [B] does not change the rate, so order in B is 0. Rate = k[A], k = 6.93 × 10−6/0.01 = 6.93 × 10−4 s−1. For t = 50 × 60 = 3000 s, kt = 2.079 = 3 ln 2, so [A] = 0.5/8 = 0.0625 M. Rate = 6.93 × 10−4 × 0.0625 = 4.33 × 10−5 M s−1.

Teacher's Note: Compare experiments pairwise to get orders; 3000 s is exactly three half-lives here.

Exam Note: Find orders first, then integrated first-order law.

Question 4. The reaction A(g) + 2B(g) → C(g) is an elementary reaction. In an experiment involving this reaction, the initial partial pressures of A and B are PA = 0.40 atm and PB = 1.0 atm respectively. When PC = 0.3 atm, the rate of the reaction relative to the initial rate is:
(a) 1/12
(b) 1/50
(c) 1/25
(d) none of these

Solution. Answer: (c). Elementary, so r = k PA PB2. When PC = 0.3 atm, PA = 0.4 − 0.3 = 0.1 atm and PB = 1.0 − 0.6 = 0.4 atm. r2/r1 = (0.1 × 0.42)/(0.4 × 12) = 0.016/0.4 = 1/25.

Teacher's Note: B is consumed twice as fast as A; reduce both pressures before using the rate law.

Exam Note: Use stoichiometry: B falls by 2×0.3.

Question 5. Which of the following is incorrect statement?
(a) Stoichiometry of a reaction tells about the order of the elementary reactions
(b) For a zero order reaction, rate and the rate constant are identical.
(c) A zero order reaction is controlled by factors other than concentration of reactants
(d) A zero order reaction is an elementary reaction

Solution. Answer (from key): (d). A zero order reaction cannot be an elementary reaction, because molecularity of an elementary step is at least 1 and equals its order. Zero order kinetics arises in complex reactions (for example surface-catalysed decomposition), where the rate is controlled by something other than reactant concentration. Statements (a), (b) and (c) are correct.

Teacher's Note: Elementary steps have order equal to molecularity (1, 2 or 3), never zero.

Exam Note: Zero order implies a complex reaction.

Question 6. Two first order reactions have half-lives in the ratio 8 : 1. Calculate the ratio of time intervals t1 : t2. The time t1 and t2 are the time periods for (1/4)th and (3/4)th completion.
(a) 1 : 0.301
(b) 0.125 : 0.602
(c) 1 : 602
(d) none of these

Solution. Answer (from key): (c). (Option (c) is printed as "1 : 602", evidently meaning 1 : 0.602.) For first order, t = (t1/2/0.693) ln[1/(1 − f)]. t1 (f = 1/4) = (8/0.693) ln(4/3), t2 (f = 3/4) = (1/0.693) ln 4. t1/t2 = 8 log(4/3)/log 4 = 8 × 0.125/0.602 = 1/0.602, i.e. t1 : t2 = 1 : 0.602.

Teacher's Note: Time to fraction f scales with half-life times ln[1/(1−f)]; use logs of 4/3 and 4.

Exam Note: Option (c) reads 1 : 602; intended 1 : 0.602.

Question 7. Reaction A + B → C + D follows rate law, r = k[A]1/2[B]1/2 starting with 1 M of A and B each. What is the time taken for concentration of A become 0.1 M? [Given k = 2.303 × 10−2 sec−1].
(a) 10 sec
(b) 100 sec
(c) 1000 sec
(d) 434 sec

Solution. Answer: (b). Let x react in time t. [A] = [B] = 1 − x, so dx/dt = k(1 − x)1/2(1 − x)1/2 = k(1 − x), a first-order form. t = (2.303/k) log[1/(1 − x)] = (2.303/(2.303 × 10−2)) log(1/0.1) = 100 s.

Teacher's Note: Equal starting concentrations make the half-orders combine into an effective first-order law.

Exam Note: Substitute [A]=[B]=1−x, integrate.

Question 8. For the two reactions I: A → B ; II: C → D the following graph is obtained (concentration against time; [C] starts at 1 M and its line makes 60° with the time axis, [A] starts at 0.5 M and its line makes 30° with the time axis).
1 M0.5 M[C][A]60°30°Time (min)Conc.
Which of the following is true:
(a) If [B] = [A] then at that time [B] < [D]
(b) If [C] = [A] then at that time [B] > [D]
(c) (t100%)Reaction I : (t100%)Reaction II (the value is not legible in the scan)
(d) [A] = [C] at t = √3/2 min.

Solution. Answer (from key): (c). Both lines are straight, so both reactions are zero order. kI = tan 30° = 1/√3 M/min and kII = tan 60° = √3 M/min. t100% = a/k: for I, 0.5/(1/√3) = √3/2 min; for II, 1/√3 min. Ratio tI : tII = 0.5 × 3 = 3 : 2. Check of (d): [A] = [C] when 0.5 − t/√3 = 1 − √3 t, so t(2/√3) = 0.5 and t = √3/4 min, not √3/2, so (d) is false. Note: at t = √3/4 min, [B] = 0.25 M and [D] = 0.75 M, so (b) is false, while (a) also comes out true on calculation; the book key gives (c).

Teacher's Note: Straight-line concentration graphs mean zero order; slope is k, and t(100%) = a/k.

Exam Note: Slope = tan of angle = k.

Question 9. The reaction A(g) → B(g) + 2C(g) is a first order reaction with rate constant 2.772 × 10−3 s−1. Starting with 0.1 mole of A in 2 litre vessel, find the concentration of A after 250 sec when the reaction is allowed to take place at constant pressure at 300 K.
(a) 0.0125 M
(b) 0.025 M
(c) 0.05 M
(d) none of these

Solution. Answer: (a). t1/2 = 0.693/(2.772 × 10−3) = 250 s, so moles of A left = 0.05. Moles then: A 0.05, B 0.05, C 0.10, total 0.20 mol. At constant pressure V ∝ n, so V = (0.20/0.10) × 2 = 4 L. [A] = 0.05/4 = 0.0125 M.

Teacher's Note: At constant pressure the volume grows with moles, so concentration is not simply moles/2 L.

Exam Note: Recompute final volume from total moles.

Question 10. For a first order homogeneous gaseous reaction, A → 2B + C. If the total pressure after time t was Pt and after long time (t → ∞) was P∞, then k in terms of Pt, P∞ and t is:
(a) k = (2.303/t) log[P∞/(P∞ − Pt)]
(b) k = (2.303/t) log[2P∞/(P∞ − Pt)]
(c) k = (2.303/t) log[2P∞/(3(P∞ − Pt))]
(d) none of these

Solution. Answer: (c). Let initial pressure Pi. At time t: A = Pi − x, B = 2x, C = x, so Pt = Pi + 2x. At ∞: P∞ = 3Pi, so Pi = P∞/3 and x = (Pt − Pi)/2. Pi − x = (3Pi − Pt)/2 = (P∞ − Pt)/2. k = (2.303/t) log[Pi/(Pi − x)] = (2.303/t) log[2P∞/(3(P∞ − Pt))].

Teacher's Note: Express Pi and Pi−x through P∞ = 3Pi and Pt = Pi + 2x.

Exam Note: Gas-evolution method: P∞ = 3Pi.

Question 11. A(aq) → B(aq) + C(aq) is a first order reaction. Time t, ∞; moles of reagent n1, n2. Reaction progress is measured with the help of titration of reagent ‘R’. If all A, B and C reacted with reagent and have ‘n’ factors [n factor; eq. wt. = mol. wt./n] in the ratio of 1 : 2 : 3 with the reagent. The k in terms of t, n1 and n2 is:
(a) k = (1/t) ln[n2/(n2 − n1)]
(b) k = (1/t) ln[2n2/(n2 − n1)]
(c) k = (1/t) ln[4n2/(n2 − n1)]
(d) k = (1/t) ln[4n2/(5(n2 − n1))]

Solution. Answer: (d). Let initial moles of A = n. At time t: A = n − x, B = x, C = x; the reagent used is proportional to (n − x)×1 + x×2 + x×3 = n + 4x = n1. At ∞: all A converted, 2n + 3n = 5n = n2, so n = n2/5 and x = (n1 − n)/4. Then n − x = (5n − n1)/4 = (n2 − n1)/4. k = (1/t) ln[n/(n − x)] = (1/t) ln[4n2/(5(n2 − n1))].

Teacher's Note: Titre is a weighted sum of species with n-factors; use the t = ∞ titre to find the initial amount.

Exam Note: Weight each species by its n-factor.

Question 12. The gaseous decomposition reaction, A(g) → 2B(g) + C(g) is observed to first order over the excess of liquid water at 25 °C. It is found that after 10 minutes the total pressure of system is 188 torr and after very long time it is 388 torr. The rate constant of the reaction (in hr−1) is: [Given: vapour pressure of H2O at 25° is 28 torr (ln 2 = 0.7, ln 3 = 1.1, ln 10 = 2.3)]
(a) 0.02
(b) 1.2
(c) 0.2
(d) none of these

Solution. Answer: (b). Let initial pressure of A = P0. After 10 min: (P0 − x) + 2x + x + 28 = 188, so P0 + 2x = 160. After long time: 3P0 + 28 = 388, so P0 = 120 torr and x = 20. k = (1/10) ln[120/(120 − 20)] = (1/10)(ln 12 − ln 10) = (1/10)(2 ln 2 + ln 3 − ln 10) = (1/10)(1.4 + 1.1 − 2.3) = 0.02 min−1 = 1.2 hr−1.

Teacher's Note: Subtract water vapour pressure before applying P∞ = 3P0; then convert min⁻¹ to hr⁻¹.

Exam Note: Deduct 28 torr; convert to per hour.

Question 13. The reaction, Sucrose —H+→ Glucose + Fructose, takes place at certain temperature while the volume of solution is maintained at 1 litre. At time zero the initial rotation of the mixture is 34°. After 30 minutes the total rotation of solution is 19° and after a very long time, the total rotation is −11 °C. Find the time when solution was optically inactive.
(a) 135 min
(b) 103.7 min
(c) 38.7 min
(d) 45 min

Solution. Answer: (b). k = (2.303/t) log[(r0 − r∞)/(rt − r∞)] = (2.303/30) log[(34 + 11)/(19 + 11)] = 1.35 × 10−2 min−1. Optically inactive means rt = 0: t = (1/k) ln[45/(0 + 11)] ≈ 1.41/1.35 × 10−2 ≈ 104 min, i.e. option (b) 103.7 min (small difference is rounding).

Teacher's Note: Inversion of sucrose is pseudo first order; use rotation differences from the final rotation.

Exam Note: Use r₀−r∞ over rₜ−r∞ with signs.

Question 14. A gaseous compound A reacts by three independent first order processes (as shown in figure) with rate constant 2 × 10−3, 3 × 10−3 and 1.93 × 10−3 sec−1 for products B, C and D respectively (A(g) → B(g) with k1, A(g) → C(g) with k2, A(g) → D(g) with k3). If initially pure A was taken in a closed container with P = 8 atm, then the partial pressure of B (in atm) after 100 sec from start of experiment.
(a) 0.288
(b) 0.577
(c) 1.154
(d) none of these

Solution. Answer: (c). Overall k = k1 + k2 + k3 = 6.93 × 10−3 s−1, t1/2 = 0.693/(6.93 × 10−3) = 100 s. After 100 s, A left = 4 atm, so 4 atm of A has reacted (each A gives one gas molecule). B forms in the ratio k1/k = 2/6.93, so PB = 4 × 2/6.93 = 1.154 atm.

Teacher's Note: Parallel first-order paths: products split in ratio of rate constants; time equals one half-life.

Exam Note: Share of B = k₁/(k₁+k₂+k₃).

Question 15. A compound A dissociate by two parallel first order paths at certain temperature: A(g) —k1→ 2B(g), k1 = 6.93 × 10−3 min−1; A(g) —k2→ C(g), k2 = 6.93 × 10−3 min−1. The reaction started with 1 mole of pure ‘A’ in 1 litre closed container with initial pressure 2 atm. What is the pressure (in atm) developed in container after 50 minutes from start of experiment?
(a) 1.25
(b) 0.75
(c) 1.50
(d) 2.50

Solution. Answer: (d). (k1 + k2)t = 2 × 6.93 × 10−3 × 50 = 0.693 = ln 2, so half of A remains (0.5 mol). Since k1 = k2, equal amounts x = y = 0.25 mol of A went to each path, giving B = 0.5 mol and C = 0.25 mol. Total moles = 0.5 + 0.5 + 0.25 = 1.25 mol, which is 25% more than 1 mol, so P = 2 × 1.25 = 2.5 atm.

Teacher's Note: Moles of gas, not moles reacted, set the pressure; B path doubles the molecules.

Exam Note: Count total gas moles at 50 min.

Question 16. For given hypothetical elementary parallel reaction, A —k1→ 2B and A —k2→ 2C, where k1/k2 = 1/2. Initially only 2 moles of A are present. The total no. of moles of A, B and C at the end of 75% of reaction are:
(a) 2
(b) 3
(c) 4
(d) 3.5

Solution. Answer: (d). 75% of 2 mol A reacts, leaving 0.5 mol A. The 1.5 mol A that reacted forms 2 mol of B or C per mol A (whichever path), i.e. 3 mol of B + C together (the ratio k1/k2 only decides the split). Total = 0.5 + 3 = 3.5 mol.

Teacher's Note: Both paths give 2 product molecules per A, so the rate-constant ratio does not matter for the total.

Exam Note: Total = A left + 2 × A reacted.

Question 17. The reaction cis-X ⇌ trans-X is first order in both directions. At 25 °C, the equilibrium constant is 0.10 and the rate constant kf = 3 × 10−4 s−1. In an experiment starting with the pure cis-form, how long would it take for half of the equilibrium amount of the trans-isomer to be formed?
(a) 150 sec
(b) 200 sec
(c) 240 sec
(d) 210 sec

Solution. Answer: (d). K = kf/kb = 0.10, so kb = 3 × 10−4/0.1 = 3 × 10−3 s−1. For approach to equilibrium, (kf + kb)t = ln[xe/(xe − x)] with x = xe/2, giving (3.3 × 10−3)t = ln 2, t = 0.693/(3.3 × 10−3) = 210 s.

Teacher's Note: Opposing first-order reactions relax with rate (kf+kb); halfway means ln 2.

Exam Note: Add forward and backward constants.

Question 18. A hydrogenation reaction is carried out at 500 K. If the same reaction is carried out in the presence of a catalyst at the same rate with same frequency factor, the temperature required is 400 K. What is the activation energy of the reaction, if the catalyst lowers the activation energy barrier by 16 kJ/mol?
(a) 100 kJ/mol
(b) 80 kJ/mol
(c) 60 kJ/mol
(d) None of these

Solution. Answer: (b). Same rate and same A means same k, so A e−Ea/R·500 = A e−(Ea−16)/R·400, i.e. Ea/500 = (Ea − 16)/400. Then 400Ea = 500Ea − 8000, so Ea = 80 kJ/mol.

Teacher's Note: Equal k and equal A force Ea/T to be equal for both paths.

Exam Note: Set Ea/T equal for both conditions.

Question 19. Consider the reaction A → B (rate constant k1) and A → C (rate constant k2). The rate constants for two parallel reactions were found to be 10−2 dm3 mol−1 s−1 and 4 × 10−2 dm3 mol−1 s−1. If the corresponding energies of activation of the parallel reaction are 100 and 120 kJ/mol respectively, what is the net energy of activation (Ea) of A?
(a) 100 kJ/mol
(b) 120 kJ/mol
(c) 116 kJ/mol
(d) 220 kJ/mol

Solution. Answer: (c). For parallel reactions Ea = (k1Ea1 + k2Ea2)/(k1 + k2) = (10−2 × 100 + 4 × 10−2 × 120)/(10−2 + 4 × 10−2) = 5.8/0.05 = 116 kJ/mol.

Teacher's Note: Net activation energy of parallel paths is the rate-constant-weighted average.

Exam Note: Weighted average of Ea by k.

Question 20. A reaction takes place in various steps. The rate constant for first, second, third and fifth steps are k1, k2, k3 and k5 respectively. The overall rate constant is given by k = (k2/k3)(k1/k5)1/2. If activation energy are 40, 60, 50 and 10 kJ/mol respectively, the overall energy of activation (kJ/mol) is:
(a) 10
(b) 20
(c) 25
(d) none of these

Solution. Answer: (c). Taking ln of k = A e−Ea/RT for the composite expression: Ea = Ea2 − Ea3 + ½(Ea1 − Ea5) = 60 − 50 + ½(40 − 10) = 10 + 15 = 25 kJ/mol.

Teacher's Note: Quotients subtract activation energies; a square root halves the contribution.

Exam Note: Apply exponents of k to each Ea.

Question 21. For reaction A → B, the rate constant k1 = A1 e−Ea1/(RT) and for the reaction X → Y, the rate constant k2 = A2 e−Ea2/(RT). If A1 = 108, A2 = 1010 and Ea1 = 600 cal/mol, Ea2 = 1800 cal/mol, then the temperature at which k1 = k2 is (Given R = 2 cal/K-mol)
(a) 1200 K
(b) 1200 × 4.606 K
(c) 1200/4.606 K
(d) 600/4.606 K

Solution. Answer: (d). k1 = k2 gives A2/A1 = e(Ea2 − Ea1)/RT, so 102 = exp[1200/(2T)] = exp(600/T). Then 600/T = ln 100 = 2 ln 10 = 4.606, so T = 600/4.606 K ≈ 130 K.

Teacher's Note: Equal rate constants relate the ratio of pre-exponential factors to the activation energy gap.

Exam Note: Take ln of A₂/A₁.

Question 22. For first order parallel reaction k1 and k2 are 4 and 2 min−1 respectively at 300 K (A → B with k1, A → C with k2). If the activation energies for the formation of B and C are respectively 30,000 and 38,314 joule/mole, the temperature at which B and C will be obtained in equimolar ratio is:
(a) 757.48 K
(b) 378.74 K
(c) 600 K
(d) none of these

Solution. Answer: (b). Equimolar B and C needs k1′ = k2′ at the new temperature T2. ln(k1′/k1) = (E1/R)(1/T1 − 1/T2) and ln(k2′/k2) = (E2/R)(1/T1 − 1/T2). Subtracting with k1′ = k2′: ln(k2/k1) = ((E1 − E2)/R)(1/T1 − 1/T2), so ln 2 = (8314/8.314)(T2 − 300)/(300 T2) = 1000 (T2 − 300)/(300 T2). Solving gives T2 = 378.74 K (verified numerically 378.76 K with ln 2 = 0.693).

Teacher's Note: Equimolar products need equal k at the new temperature; the higher-Ea path speeds up faster.

Exam Note: Set k₁(T) = k₂(T), solve for T.

Question 23. In the series reaction A —k1→ B —k2→ C —k3→ D. If k1 > k2 > k3 then the rate determining step of the reaction is
(a) A → B
(b) C → D
(c) B → C
(d) Any step

Solution. Answer: (b). In consecutive reactions the step with the smallest rate constant is slowest and is rate determining. Since k3 is the smallest, C → D is the rate determining step.

Teacher's Note: In a series reaction the slowest (smallest k) step controls the overall rate.

Exam Note: Smallest rate constant = RDS.

Question 24. The following mechanism has been proposed for the exothermic catalyzed complex reaction: A + B ⇌ IAB (forward slow, backward fast); IAB —k1→ AB + I; AB + I —k2→ P + A. If k1 is much smaller than k2, the most suitable qualitative plot of potential energy (P.E.) versus reaction co-ordinate (R.C.) for the above reaction is: four sketches (a) to (d) are given (levels labelled A+B, IAB, AB+I, A+P).

Solution. Answer (from key): (b). The formation of IAB is slow forward and fast backward, so its barrier is small; k1 ≪ k2 makes the step IAB → AB + I the slowest, so it has the highest barrier; the last step (AB + I → A + P) is fast, so it has a lower barrier than that; and the reaction is exothermic so A + P lies below A + B. Plot (b) shows exactly this: a low first hump to the IAB well, the tallest hump next, a small third hump, and final level A + P below the start. Plot (a) has the final level above the start, (c) has the tallest hump last, and (d) shows the tallest hump with A + P above AB + I and no exothermic drop below A + B.

Teacher's Note: Slow step has the highest barrier; exothermic means products end below reactants.

Exam Note: Highest hump = slow step; products lower.

Question 25. The mechanism of esterification in presence of acid catalyst (H2SO4) is proposed as follows: (I) CH3COOH + H+ ⇌ (II) CH3C(OH)2+ (k1 forward, k1′ backward, both fast); (II) + C2H5OH ⇌ (III) CH3C(OH)2(O+HC2H5) (forward slow k2, backward fast k2′); (III) ⇌ (IV) CH3C(OH)(OC2H5)(O+H2) (k3, k3′, both fast); (IV) ⇌ (V) CH3C+(OH)(OC2H5) + H2O (forward, loss of H2O, k4 fast; reverse, addition of H2O, k4′ slow); (V) ⇌ (VI) CH3COOC2H5 + H+ (k5, k5′, both fast). Which of the following potential energy vs reaction co-ordinate diagrams is consistent with the given mechanism? Four diagrams (a) to (d) are given with the species I to VI marked on the energy levels.

Solution. Answer (from key): (a). In the energy diagram a slow step corresponds to a high barrier and a fast step to a low barrier. The slow steps of this mechanism (II + C2H5OH → III, and the reverse step V + H2O → IV) therefore appear as the two tall barriers, while the proton transfers (I ⇌ II, III ⇌ IV, V ⇌ VI) appear as small barriers. The key gives diagram (a) as the one consistent with this pattern (I and II at the start, III and IV between the tall barriers, V and VI at the end). The shapes of the diagrams could not be reproduced reliably, so the choice rests on the printed key.

Teacher's Note: Slow steps show as tall barriers, fast proton-transfer steps as small ones.

Exam Note: Match barrier heights to slow and fast steps.

Question 26. For the first order reaction A → B + C, carried out at 27 °C if 3.8 × 10−16% of the reactant molecules exists in the activated state, the Ea (activation energy) of the reaction is:
(a) 12 kJ/mol
(b) 831.4 kJ/mol
(c) 100 kJ/mol
(d) 88.57 kJ/mol

Solution. Answer: (c). Fraction in activated state = e−Ea/RT = 3.8 × 10−16/100 = 3.8 × 10−18. So Ea = RT ln(1/3.8 × 10−18) = 8.314 × 300 × 40.11 ≈ 1.00 × 105 J/mol = 100 kJ/mol.

Teacher's Note: Convert the percentage to a fraction before taking logs of the Boltzmann factor.

Exam Note: Percent to fraction: divide by 100.

Question 27. Upon irradiating californium with neutrons, a scientist discovered a new nuclide having mass number of 250 and a half-life of 30 min. After 90 min. of irradiation, the radioactivity due to nuclide was 100 dis/min. How many atoms of the nuclide were prepared initially?
(a) 2.4 × 104
(b) 3.46 × 104
(c) 1900
(d) 800

Solution. Answer: (b). 90 min = 3 half-lives, so A0 = 100 × 23 = 800 dpm. N0 = A0/λ = 800 × 30/0.693 = 3.46 × 104 atoms (λ in min−1).

Teacher's Note: Activity = λN; back-calculate initial activity over three half-lives, then divide by λ.

Exam Note: Use consistent time units for λ.

Question 28. A radioactive isotope X with half-life of 6.93 × 109 years decay to Y which is stable. A sample of rock from the moon was found to contain both the elements X and Y in the mole ratio 1 : 7. What is the age of the rock?
(a) 2.079 × 1010 years
(b) 1.94 × 1010 years
(c) 1.33 × 109 years
(d) 1010 years

Solution. Answer: (a). X : Y = 1 : 7, so X left is 1/8 of the original (N0/N = 8). That is 3 half-lives: t = 3 × 6.93 × 109 = 2.079 × 1010 years. (Equivalently λ = 10−10 yr−1, t = (2.303/λ) log 8.)

Teacher's Note: Daughter atoms plus remaining parent equal the original parent atoms.

Exam Note: Original = X + Y = 8 parts.

Question 29. The average (mean) life of a radio nuclide which decays by parallel path is: A —λ1→ B, λ1 = 1.8 × 10−2 sec−1; 2A —λ2→ B, λ2 = 10−3 sec−1.
(a) 52.63 sec
(b) 500 sec
(c) 50 sec
(d) none of these

Solution. Answer: (c). As in the book, the second path removes two atoms of A per event, so λnet = λ1 + 2λ2 = 1.8 × 10−2 + 2 × 10−3 = 2 × 10−2 s−1. Average life = 1/λnet = 50 s.

Teacher's Note: Parallel decay constants add; the 2A path contributes twice its constant here.

Exam Note: Average life is 1/λ(net).

Question 30. The radioactive decay 83Bi211 → 81Tl207, takes place in 100 L closed vessel at 27 °C. Starting with 2 moles of 83Bi211 (t1/2 = 130 sec), the pressure development in the vessel after 520 sec will be:
(a) 1.875 atm
(b) 0.2155 atm
(c) 0.4618 atm
(d) 4.618 atm

Solution. Answer: (c). The decay emits a helium nucleus (2He4), which gives the gas. 520 s = 4 half-lives, so Bi left = 2/24 = 0.125 mol and He formed = 2 − 0.125 = 1.875 mol. P = nRT/V = 1.875 × 0.0821 × 300/100 = 0.4618 atm.

Teacher's Note: Only the α-particle (helium) is gas; count moles after four half-lives.

Exam Note: Gas moles = moles decayed.

Question 31. A fresh radioactive mixture containing short lives species A and B. Both emitting α-particles initially of 8000 α-particles per minute. 20 minutes later, they emit at the rate of 3500 α-particles per minute. If the half-lives of the species A and B are 10 minutes and 500 hours respectively, then the ratio of activities of A : B in the initial mixture was:
(a) 4 : 6
(b) 6 : 4
(c) 3 : 4
(d) 3 : 1

Solution. Answer: (d). Let initial activities be A0 and B0: A0 + B0 = 8000. After 20 min (two half-lives of A) A has 1/4 of its activity, while B (t1/2 = 500 h) is practically unchanged: A0/4 + B0 = 3500. Subtracting, 3A0/4 = 4500, so A0 = 6000 and B0 = 2000, ratio 3 : 1.

Teacher's Note: The long-lived species is effectively constant over 20 minutes; solve two linear equations.

Exam Note: Two half-lives of A = 1/4 activity.

Question 32. In order to determine the volume of blood in an animal, a 1.0 mL sample of solution of 103 dpm of 1H3 is injected into the animal blood stream. After sufficient time for circulatory equilibrium to be established, 2 mL of blood is found to have activity to 10 dpm. The volume of blood in animal is:
(a) 199 mL
(b) 198 mL
(c) 200 mL
(d) 20 mL

Solution. Answer: (a). Activity is conserved during mixing (decay negligible). If blood volume is V mL, the total volume after injection is (V + 1) mL. Activity per 2 mL is 10 dpm, so total activity = (10/2)(V + 1) = 1000, giving V + 1 = 200 and V = 199 mL.

Teacher's Note: Isotope dilution: injected activity equals concentration times total volume including the injected 1 mL.

Exam Note: Include the injected 1 mL in volume.

Question 33. The ratio of activities of two radio nuclides X and Y in a mixture at time t = 0 was found to be 4 : 1. After two hours, the ratio of activities becomes 1 : 1. If the t1/2 of radio nuclide X is 20 min then t1/2 [in minutes] of radio nuclide Y is:
(a) 10
(b) 20
(c) 30
(d) 40

Solution. Answer: (c). AX/AY = 4 e−(λX − λY)t = 1 at t = 120 min, so (λX − λY)t = ln 4, λX − λY = 1.386/120 = 0.01155 min−1. λX = 0.693/20 = 0.03466, so λY = 0.02310 and (t1/2)Y = 0.693/0.0231 = 30 min.

Teacher's Note: Activity ratio changes exponentially with the difference of decay constants.

Exam Note: Use ln 4 over 120 minutes.

Question 34. Find the age of an ancient Egyptian wooden article (in years) from the given information. (i) Activity of 1 g of carbon obtained from ancient wooden article = 7 counts/min/g (ii) Activity of 1 g carbon obtained from fresh wooden sample = 15.4 counts per min/g (iii) Percentage increase in level of C14 due to nuclear explosions in past 100 years is 10% (iv) t1/2 of 6C14 = 5770 years
(a) 5.770 × 103
(b) 16.87 × 103
(c) 2488
(d) none of these

Solution. Answer: (a). The fresh sample reads 10% too high because of nuclear explosions, so the true initial activity A0 satisfies A0 + A0/10 = 15.4, giving A0 = 14. t = (1/λ) ln(14/7) = ln 2/λ = t1/2 = 5770 years.

Teacher's Note: Correct the modern reference activity for the 10% bomb-test excess before dating.

Exam Note: Divide 15.4 by 1.1 first.

Question 35. The isotopes 238U and 235U occur in nature in the weight ratio 140 : 1. It is assumed that initially they were found in equal weight. If half life (t1/2) of 238U = 4.5 × 109 and t1/2 of 235U = 5 × 108 year respectively then the age of earth is (log 7 = 0.846; log 2 = 0.3)
(a) 4.02 × 109 year
(b) 2.01 × 109 year
(c) 8.72 × 109 year
(d) None of these

Solution. Answer: (a). With equal initial amounts n0, n1 = n0e−λ1t (238U) and n2 = n0e−λ2t (235U). So (λ2 − λ1)t = ln(n1/n2) = ln 140. λ2 − λ1 = 0.693[1/(5 × 108) − 1/(4.5 × 109)] = 1.232 × 10−9 yr−1. ln 140 = 2.303 × (0.846 + 0.3 + 1) = 4.94. t = 4.94/1.232 × 10−9 ≈ 4.02 × 109 years.

Teacher's Note: Equal start, so the ratio now depends only on the difference of decay constants.

Exam Note: Break 140 as 7×2×10 for logs.

Level 3 - Passage 1

Passage 1, Question 1. Two consecutive irreversible first order reactions can be represented by A —k1→ B —k2→ C. The rate equation for A is readily integrated to obtain [A]t = [A]0 e−k1t; and [B]t = (k1[A]0/(k2 − k1)) [e−k1t − e−k2t].
At what time will B be present in greatest concentration?
(a) k1/(k2 − k1)
(b) [1/(k1 − k2)] ln(k1/k2)
(c) [1/(k2 − k1)] ln(k1/k2)
(d) None of these

Solution. Answer: (b). [B] is maximum when d[B]/dt = 0, i.e. k1e−k1t = k2e−k2t. Hence e(k1 − k2)t = k1/k2 and tmax = [1/(k1 − k2)] ln(k1/k2). (Option (c) has the opposite sign in the denominator and would give a negative time.)

Teacher's Note: Maximum intermediate concentration occurs where its formation and decay rates are equal.

Exam Note: Set d[B]/dt = 0.

Passage 1, Question 2. Two consecutive irreversible first order reactions can be represented by A —k1→ B —k2→ C. The rate equation for A is readily integrated to obtain [A]t = [A]0 e−k1t; and [B]t = (k1[A]0/(k2 − k1)) [e−k1t − e−k2t].
When k1 = 1 s−1 and k2 = 50 s−1; select most appropriate graph. Graph (a): B rises to a clear hump below A and then falls, C rises to a plateau. Graph (b): [A] decays smoothly, [B] stays very small with a tiny hump near zero, [C] rises smoothly to a plateau (close to [A] mirror). Graph (c): [B] rises to a large maximum, [C] is S-shaped. Graph (d): [B] rises to a plateau (stays high) and [C] is S-shaped and stays lower.

Solution. Answer: (b). With k2 ≫ k1, B is converted to C almost as soon as it forms, so [B] remains very small and C appears almost as quickly as A disappears. That matches graph (b).

Teacher's Note: A very fast second step keeps the intermediate concentration tiny (steady-state like).

Exam Note: k₂ ≫ k₁ means [B] stays small.

Passage 1, Question 3. Two consecutive irreversible first order reactions can be represented by A —k1→ B —k2→ C. The rate equation for A is readily integrated to obtain [A]t = [A]0 e−k1t; and [B]t = (k1[A]0/(k2 − k1)) [e−k1t − e−k2t].
If k1 and k2 both are almost same then which graph is most suitable: (a) graph A (b) graph B (c) graph C (d) graph D (graphs as described in Question 2).

Solution. Answer: (c) (the key digit is overprinted in the scan; the book hint also reads (c)). If k1 ≈ k2 = k, [B] = k1[A]0 t e−kt, which reaches a maximum of [A]0/e ≈ 0.37[A]0 at t = 1/k, comparable with [A] there. B accumulates to a large hump and C grows S-shaped (starting with zero slope): graph (c).

Teacher's Note: Comparable k values let B accumulate to a large maximum; C starts with zero slope.

Exam Note: Large B hump and S-shaped C.

Passage 1, Question 4. Two consecutive irreversible first order reactions can be represented by A —k1→ B —k2→ C. The rate equation for A is readily integrated to obtain [A]t = [A]0 e−k1t; and [B]t = (k1[A]0/(k2 − k1)) [e−k1t − e−k2t].
Select the correct statement for given reaction: (a) A decreases linearly (b) B rises to a max. and then constant (c) B rises to a max. and then falls (d) The slowest rate of increases of C occuring where B is max.

Solution. Answer: (c). [A] decays exponentially (not linearly). [B] rises to a maximum and then falls as it is converted to C, it does not stay constant. The rate of formation of C is k2[B], which is largest (not slowest) where [B] is maximum. So only (c) is correct.

Teacher's Note: Intermediate B of a consecutive reaction rises, peaks, then falls to zero.

Exam Note: Rate of C formation is k₂[B].

Level 3 - Passage 2

Passage 2, Question 1. Arrhenius studied the effect of temperature on the rate of reaction and postulated that rate constant varies with temperature exponentially as k = A e−Ea/RT. This method is generally used for finding the activation energy of a reaction. Keeping temperature constant, the effect of catalyst on the activation energy has also been studied.
The pre-exponential factor in the Arrhenius equation of a first order reaction has the units: (a) mol L−1 s−1 (b) L mol−1 s−1 (c) s−1 (d) dimensionless

Solution. Answer: (c). The factor e−Ea/RT is dimensionless, so A has the same units as k. For a first order reaction k has units s−1.

Teacher's Note: A carries the units of k because the exponential term is dimensionless.

Exam Note: Units of A equal units of k.

Passage 2, Question 2. Arrhenius studied the effect of temperature on the rate of reaction and postulated that rate constant varies with temperature exponentially as k = A e−Ea/RT. This method is generally used for finding the activation energy of a reaction. Keeping temperature constant, the effect of catalyst on the activation energy has also been studied.
If x is the fraction of molecules having energy greater than Ea, it will be given by: (a) x = −Ea/RT (b) ln x = −Ea/RT (c) x = eEa/RT (d) Any of these

Solution. Answer: (b). The fraction of molecules with energy ≥ Ea is x = e−Ea/RT, so ln x = −Ea/RT.

Teacher's Note: Boltzmann factor gives the fraction of molecules above the threshold energy.

Exam Note: x = e^(−Ea/RT), so ln x = −Ea/RT.

Passage 2, Question 3. Arrhenius studied the effect of temperature on the rate of reaction and postulated that rate constant varies with temperature exponentially as k = A e−Ea/RT. This method is generally used for finding the activation energy of a reaction. Keeping temperature constant, the effect of catalyst on the activation energy has also been studied.
If the rate of reaction doubles on 10 °C rise of temperature from 290 K to 300 K, the activation energy of the reaction will be approximately: (a) 40 kcal mol−1 (b) 12 kcal mol−1 (c) 60 kcal mol−1 (d) 70 kcal mol−1

Solution. Answer: (b). log(k2/k1) = (Ea/2.303R)(T2 − T1)/(T1T2). With k2/k1 = 2: Ea = 2.303 × 1.987 × 0.301 × (290 × 300)/10 ≈ 1.2 × 104 cal = 12 kcal mol−1.

Teacher's Note: Use the two-temperature Arrhenius form with R in cal for kcal answers.

Exam Note: R = 1.987 cal/mol K for kcal.

Level 3 - Passage 3

Passage 3, Question 1. An important parameter of a photochemical reaction is the quantum efficiency or quantum yield (φ) which is defined as φ = moles of the substance reacted/moles of photons absorbed. Absorption of UV radiation decompose acetone according to the reaction (CH3)2CO —hν→ C2H6 + CO.
The quantum yield of the reaction at 330 nm is 0.4. A sample of acetone absorbs monochromatic radiation at 330 nm at the rate of 7.2 × 10−3 J s−1 (Given: NA = 6 × 1023; h = 6.6 × 10−34 in S.I. unit). The rate of formation of CO (mol/s) is: (a) 2 × 10−8 (b) 8 × 10−8 (c) 8 × 10−9 (d) none of these

Solution. Answer: (c). Energy per photon = hc/λ = 6.6 × 10−34 × 3 × 108/(330 × 10−9) = 6 × 10−19 J. Photons absorbed per second = 7.2 × 10−3/6 × 10−19 = 1.2 × 1016, i.e. 1.2 × 1016/6 × 1023 = 2 × 10−8 mol photons/s. Rate of CO formation = φ × 2 × 10−8 = 0.4 × 2 × 10−8 = 8 × 10−9 mol/s.

Teacher's Note: Convert absorbed power to moles of photons, then multiply by quantum yield.

Exam Note: Photon energy = hc/λ.

Passage 3, Question 2. An important parameter of a photochemical reaction is the quantum efficiency or quantum yield (φ) which is defined as φ = moles of the substance reacted/moles of photons absorbed. Absorption of UV radiation decompose acetone according to the reaction (CH3)2CO —hν→ C2H6 + CO.
If quantum yield is 0.8 then rate of formation of C2H6 (mol/s) is: (a) 2 × 10−8 (b) 1.6 × 10−9 (c) 16 × 10−9 (d) 8 × 10−9 (data of Question 1: 7.2 × 10−3 J s−1 absorbed at 330 nm)

Solution. Answer: (c). Photons absorbed = 2 × 10−8 mol/s (as above). Rate = 0.8 × 2 × 10−8 = 1.6 × 10−8 = 16 × 10−9 mol/s. One molecule of C2H6 forms per acetone decomposed.

Teacher's Note: Quantum yield scales the photon rate to molecules reacted; ethane equals CO in amount.

Exam Note: Rate = φ × photon rate.

Level 3 - Passage 4

Passage 4, Question 1. Radioactive disintegration is a first order reaction and its rate depends only upon the nature of nucleus and does not depend upon external factors like temperature and pressure. The rate of radioactive disintegration (Activity) is represented as −dN/dt = λN, where λ = decay constant; N = N0 of nuclei at time t; N0 = initial no. of nuclei. The above equation after integration can be represented as λ = (2.303/t) log(N0/N).
Half-life of U237 is 2.5 × 105 years. In how much time will the amount of U237 remaining be only 25% of the original amount? (a) 2.5 × 105 years (b) 1.25 × 105 years (c) 5 × 105 years (d) 106 years

Solution. Answer: (c). 25% remaining means N/N0 = 1/4 = (1/2)2, so two half-lives: t = 2 × 2.5 × 105 = 5 × 105 years.

Teacher's Note: Quarter left equals two half-lives.

Exam Note: Count half-lives by powers of 1/2.

Passage 4, Question 2. Radioactive disintegration is a first order reaction and its rate depends only upon the nature of nucleus and does not depend upon external factors like temperature and pressure. The rate of radioactive disintegration (Activity) is represented as −dN/dt = λN, where λ = decay constant; N = N0 of nuclei at time t; N0 = initial no. of nuclei. The above equation after integration can be represented as λ = (2.303/t) log(N0/N).
Calculate the half-life period of a radioactive element which remains only 1/16 of its original amount in 4740 years: (a) 1185 years (b) 2370 years (c) 52.5 years (d) none of these

Solution. Answer: (a). 1/16 = (1/2)4, so n = 4 half-lives. 4740 = 4 × t1/2 gives t1/2 = 1185 years.

Teacher's Note: Number of half-lives is the power of 1/2 equal to the fraction left.

Exam Note: n = 4, so t½ = total/4.

Passage 4, Question 3. Radioactive disintegration is a first order reaction and its rate depends only upon the nature of nucleus and does not depend upon external factors like temperature and pressure. The rate of radioactive disintegration (Activity) is represented as −dN/dt = λN, where λ = decay constant; N = N0 of nuclei at time t; N0 = initial no. of nuclei. The above equation after integration can be represented as λ = (2.303/t) log(N0/N).
What is the activity in Ci (curie) of 1.0 mole of Plutonium-239? (t1/2 = 24,000 years) (a) 1.49 Ci (b) 14.9 Ci (c) 5.513 × 1011 Ci (d) None of these

Solution. Answer: (b). Activity = λN = (0.693/t1/2) NA. t1/2 = 24,000 × 365 × 24 × 60 × 60 = 7.57 × 1011 s, so activity = 0.693 × 6.02 × 1023/7.57 × 1011 = 5.5 × 1011 dps. 1 Ci = 3.7 × 1010 dps, so activity = 14.9 Ci. (The value 5.513 × 1011 in option (c) is in dps, not Ci.)

Teacher's Note: Convert half-life to seconds; divide disintegrations per second by 3.7×10¹⁰.

Exam Note: Remember 1 Ci = 3.7×10¹⁰ dps.

Level 3 - Passage 5

Passage 5, Question 1. Size of nucleus was obtained by the equation r = R0A1/3, where r is the radius of nucleus of mass no. A and R0 is a constant whose value is equal to 1.5 × 10−15 metre. (Given 1 amu = 1.66 × 10−24 g)
What is the density of a nucleus of mass number A? (a) (4/3)π(1.5 × 10−15)3 A (b) 1.17 × 1017 g/cm3 (c) 1.17 × 10−17 kg/m3 (d) None of these

Solution. Answer (from key): (b). Mass = A × 1.66 × 10−27 kg and volume = (4/3)π(1.5 × 10−15)3A m3, so density = 1.66 × 10−27/[(4/3)π(1.5 × 10−15)3] = 1.17 × 1017 kg/m3, independent of A. Corrected: the unit printed in option (b) is g/cm3 but the value 1.17 × 1017 is in kg/m3 (= 1.17 × 1014 g/cm3); (b) is still the intended option.

Teacher's Note: Mass grows as A and volume as r³ ∝ A, so nuclear density is constant.

Exam Note: A cancels; mind kg/m³ versus g/cm³.

Passage 5, Question 2. Size of nucleus was obtained by the equation r = R0A1/3, where r is the radius of nucleus of mass no. A and R0 is a constant whose value is equal to 1.5 × 10−15 metre. (Given 1 amu = 1.66 × 10−24 g)
Nucleus radius of 6C12 is 3 × 10−15 metre. What is density ratio of dC/dH2O? (a) 1.76 × 1017 (b) 1.76 × 1014 (c) 17.6 × 107 (d) 17.6 × 1017

Solution. Answer: (b). dC = 12 × 1.66 × 10−27 kg/[(4/3)π(3 × 10−15)3 m3] = 1.76 × 1017 kg/m3. dH2O = 1000 kg/m3. Ratio = 1.76 × 1014.

Teacher's Note: Compute nuclear mass density in SI and divide by 1000 kg/m³ for water.

Exam Note: Use consistent SI units.

Level 3 - One or More Answers is/are Correct

One or more correct, Question 1. Select the correct statement(s):
(a) Rate constants are never negative
(b) Partial orders are never negative
(c) Molecularity and order of reaction both are equal for elementary reactions
(d) Order of reaction may be change with change in practical conditions (temp. and pressure)

Solution. Answer: (a, c, d). (a) k = Ae−Ea/RT is always positive. (b) Incorrect: partial orders can be negative (inhibition by a product) or fractional. (c) For an elementary reaction order = molecularity. (d) Order is experimental and can change with conditions, e.g. pseudo orders or high and low pressure.

Teacher's Note: Orders are experimental and can be negative or fractional; k cannot be negative.

Exam Note: Partial orders may be negative.

One or more correct, Question 2. Select the correct statement(s):
(a) The rate of reaction decreases with decrease in temperature
(b) The rate of reaction is uniform in zero order reaction
(c) The rate of reaction depends upon the surface area of the solid reactants
(d) Average and instantaneous rate of reaction defined for micro and macro scopic time interval respectively

Solution. Answer: (a, b, c). (a) k falls as T falls. (b) In zero order r = k stays constant. (c) For solids the rate depends on exposed surface area. (d) Incorrect: the average rate is defined over a macroscopic (finite) interval and the instantaneous rate over a microscopic (infinitesimal) interval, the reverse of what is stated.

Teacher's Note: Average rate uses a finite interval; instantaneous rate uses an infinitesimal one.

Exam Note: Check the order of micro/macro in (d).

One or more correct, Question 3. Select the correct statement(s):
(a) The rate law of the elementary reaction; 2A → B + C, must be r = k[A]2
(b) The rate law for the complex reaction A + B → C, might not be r = k[A][B]
(c) If the partial orders differ from the coefficients in the balanced reaction, the reaction must be complex
(d) If the partial orders are equal to corresponding coefficients in the balanced reaction, the reaction must be elementary

Solution. Answer: (a, b, c). (a) For an elementary step the order equals the coefficient. (b) A complex reaction can have a rate law unrelated to stoichiometry. (c) Only elementary reactions have orders equal to coefficients, so a mismatch proves a complex reaction. (d) Incorrect: a complex reaction can coincidentally give orders equal to the coefficients.

Teacher's Note: Matching orders do not prove a single step; mismatching orders prove a complex mechanism.

Exam Note: Mismatch implies complex; match does not prove elementary.

One or more correct, Question 4. Select the correct statement(s):
(a) Every substance that appears in the rate law of reaction must be a reactant or product in that reaction
(b) If we know the rate law of a reaction; we can deduce its mechanism must be
(c) If the reaction has rate r = k[A][B]3/2 then reaction may be elementary
(d) A zero order reaction must be a complex reaction

Solution. Answer: (d). (a) Incorrect: a catalyst can appear in the rate law. (b) Incorrect: the rate law cannot uniquely fix the mechanism. (c) Incorrect: a fractional order shows the reaction is complex. (d) Correct: an elementary reaction cannot be of zero order.

Teacher's Note: Fractional or zero order immediately signals a complex mechanism; catalysts can appear in rate laws.

Exam Note: Fractional order means not elementary.

One or more correct, Question 5. Select the correct statement(s):
(a) When T → ∞ or Ea → 0 then k = A
(b) A positive catalyst can change ΔH of the reaction
(c) A mixture of reactants may be thermodynamically unstable but kinetically stable
(d) A negative catalyst increases the activation energy of the reaction

Solution. Answer: (a, c, d). (a) k = Ae−Ea/RT → A as T → ∞ or Ea → 0. (b) Incorrect: a catalyst never changes ΔH. (c) True, e.g. H2 + O2 at room temperature. (d) A negative catalyst (inhibitor) raises Ea.

Teacher's Note: Catalysts change the path and Ea, never ΔH or equilibrium composition.

Exam Note: Catalyst does not alter ΔH.

One or more correct, Question 6. Consider a reaction A + B → C, in which both reactants are in the same phase may be:
(a) unimolecular elementary reaction
(b) Exothermic
(c) Heterogeneous
(d) Photochemical

Solution. Answer (from key): (b, c, d). A reaction with two reactants cannot be a unimolecular elementary step, so (a) is wrong. It may be exothermic and photochemical. (c) is given in the key as correct (a reaction of same-phase reactants can still be heterogeneous overall, for example if it occurs on a catalyst surface).

Teacher's Note: Two reacting species rule out unimolecularity; heat and light effects remain possible.

Exam Note: Two reactants cannot be unimolecular.

One or more correct, Question 7. In the following gaseous phase first order reaction A(g) → 2B(g) + C(g), initial pressure was found to be 400 mm of Hg and it changed to 1000 mm of Hg after 20 min. Then:
(a) Half-life for A is 10 min
(b) Rate constant is 0.0693 min−1
(c) Partial pressure of C at 30 min is 350 mm of Hg
(d) Total pressure after 30 min is 1150 mm of Hg

Solution. Answer: (a, b, c). Corrected: the printed key gives (a, b, c, d), but (d) is wrong. Pt = 400 + 2x = 1000, so x = 300 and A left = 100 = 400/4: two half-lives in 20 min, t1/2 = 10 min and k = 0.693/10 = 0.0693 min−1 (a, b). At 30 min (3 half-lives) A left = 400/8 = 50, so x = 350 and PC = 350 mm (c). Total pressure = 400 + 2x = 400 + 700 = 1100 mm, not 1150 mm, so (d) is false.

Teacher's Note: Total pressure = P₀ + 2x; three half-lives leave one-eighth of A.

Exam Note: Recompute total pressure as P₀ + 2x.

One or more correct, Question 8. Identify the true statement(s):
(a) A catalyst is chemically unchanged at the end of a reaction
(b) A catalyst may appear in the kinetic rate equation of the reaction
(c) A catalyst will not affect the composition of an equilibrium mixture
(d) A catalyst cannot cause a non-spontaneous (ΔG > 0) reaction to proceed

Solution. Answer: (a, b, c, d). A catalyst is regenerated, so it is unchanged chemically (a); it can appear in the rate law (b); it speeds forward and reverse reactions equally and so leaves the equilibrium composition unchanged (c); and it cannot make a reaction with ΔG > 0 proceed (d).

Teacher's Note: Catalysts alter rate only, not thermodynamics (ΔG, ΔH, K).

Exam Note: Catalyst never changes ΔG or K.

One or more correct, Question 9. For the reaction A ⇌ B (k1 s−1 forward, k2 s−1 backward) a graph of concentration (M) against time (s) is given: [A] falls from 2.0 M to a constant 0.4 M and [B] rises from 0 to a constant 1.6 M. k1 = 4 × 10−2 s−1. Which is/are correct statement(s) (ln 2 = 0.7, ln 8/7 = 0.14)
(a) Equilibrium constant is 4.0
(b) Time taken for the completion of 50% of equilibrium conc. of B is 14 sec.
(c) Time taken for the completion of 10% of initial conc. of A is 2.8 sec.
(d) Rate constant of backward reaction is 10−2 sec−1

Solution. Answer: (a, b, c, d). K = [B]eq/[A]eq = 1.6/0.4 = 4 (a). k2 = k1/K = 4 × 10−2/4 = 10−2 s−1 (d). k1 + k2 = 5 × 10−2 s−1. (b) 50% of equilibrium B: t = (1/(k1 + k2)) ln[xe/(xe − xe/2)] = 20 ln 2 = 14 s. (c) 10% of initial A: x = 0.2 M, t = 20 ln[1.6/(1.6 − 0.2)] = 20 ln(8/7) = 20 × 0.14 = 2.8 s.

Teacher's Note: Equilibrium ratio gives k₂; approach to equilibrium is governed by k₁ + k₂.

Exam Note: Use x_e = 1.6 M for B.

One or more correct, Question 10. Select the correct statement(s):
(a) α-particles are simply helium atoms
(b) γ-rays travel with higher speed as compare to α-particle and have higher ionization power as compare to β-particle
(c) A loss of β-particles results in the production of isobars
(d) β-particles are considered as the best bombarding particles

Solution. Answer: (c). (a) Incorrect: α-particles are He2+ nuclei. (b) Incorrect: γ-rays have the lowest ionising power. (c) β-emission raises Z by one at the same mass number, giving isobars. (d) Incorrect: neutrons are the best bombarding particles (no charge).

Teacher's Note: α = He²⁺ nucleus; γ ionises weakest; β emission gives isobars.

Exam Note: Neutral neutrons are best projectiles.

One or more correct, Question 11. Select the correct statement(s):
(a) In the reaction 92U235 + 0n1 → 56Ba140 + 20n1 + x, produced x is 36Kr94
(b) In the reaction 11Na23 + z → 12Mg23 + 0n1, the bombarding particle z is deuteron
(c) Very large amount of energy is produced during nuclear fission and nuclear fusion
(d) In a fission reaction, a loss in mass occurs releasing a vast energy

Solution. Answer: (a, c, d). (a) Mass: 235 + 1 = 236 = 140 + 2 + x gives 94; charge: 92 = 56 + Z gives 36, so x = 36Kr94. (b) Incorrect: balancing gives z with mass 1 and charge 1, a proton (1H1), not a deuteron. (c) and (d) are correct (mass defect becomes energy).

Teacher's Note: Balance mass number and atomic number on both sides to identify unknown particles.

Exam Note: Balance A and Z separately.

One or more correct, Question 12. Select the correct statement(s):
(a) SI unit of radioactivity is becquerel (Bq)
(b) 1 Ci = 3.7 × 107 Bq
(c) 3Li7 + 1H1 → 2He4 is (P, α) type reaction
(d) The half-life of a particular radioactive isotope is a characteristics constant of that isotope

Solution. Answer: (a, c, d). (a) 1 Bq = 1 disintegration per second. (b) Incorrect: 1 Ci = 3.7 × 1010 Bq. (c) A proton goes in and an α-particle comes out (the other product is a second He nucleus), i.e. (p, α). (d) Half-life is characteristic of the isotope.

Teacher's Note: Curie is 3.7×10¹⁰ disintegrations per second; Bq is one per second.

Exam Note: 1 Ci = 3.7×10¹⁰ Bq.

One or more correct, Question 13. Select the correct statement(s):
(a) On bombarding 7N14 nuclei with α-particle, the nuclei of the product formed after release of proton would be 8O17
(b) Decay constant does not depend upon temperature
(c) Nuclide and it’s decay product after α-emission are called isodiaphers
(d) Half-life of radium is 1580 years. It’s average life will be 1097.22 years

Solution. Answer: (a, b, c). (a) 7N14 + 2He4 → 8O17 + 1H1. (b) λ is independent of temperature. (c) α-emission lowers mass number by 4 and Z by 2, so n − p stays the same: isodiaphers. (d) Incorrect: average life = 1.44 × 1580 ≈ 2279 years (1097 is 0.693 × 1580).

Teacher's Note: Average life is half-life divided by 0.693, i.e. longer than half-life.

Exam Note: τ = 1.44 × t½, not 0.693 × t½.

One or more correct, Question 14. In the decay process A —(−α)→ B —(−β)→ C —(−β)→ D
(a) A and B are isobars
(b) A and D are isotopes
(c) B, C and D are isobars
(d) A and C are isotones

Solution. Answer: (b, c). Let A = (Z, M). B = (Z − 2, M − 4), C = (Z − 1, M − 4), D = (Z, M − 4). (a) A and B differ in mass number, so not isobars. (b) A and D both have atomic number Z: isotopes. (c) B, C, D share mass number M − 4: isobars. (d) Neutrons in A = M − Z, in C = M − Z − 3, so not isotones.

Teacher's Note: Track Z and M through each emission; same Z means isotopes, same M means isobars.

Exam Note: α: ΔZ=−2, ΔM=−4; β: ΔZ=+1.

One or more correct, Question 15. In electron capture (radioactive process)
(a) a neutron is formed
(b) a proton is consumed
(c) γ-ray emission takes place
(d) X-ray emission takes place

Solution. Answer: (a, b, d). Corrected: the printed key gives (a, b), but X-ray emission also takes place. In electron capture a proton captures an inner (K-shell) electron to form a neutron (a, b); an outer electron then falls into the vacancy and characteristic X-rays are emitted (d). γ-ray emission is not a necessary feature (c).

Teacher's Note: Inner-shell vacancy after capture is refilled with emission of characteristic X-rays.

Exam Note: Electron capture gives X-rays, not necessarily γ.

One or more correct, Question 16. Select the correct statement(s) for positron emission by unstable nucleus:
(a) X-ray emission takes place
(b) A neutron is formed
(c) n/p of daughter nucleus increases
(d) A neutron is consumed

Solution. Answer: (b, c). Corrected: the printed key gives (c, d), but a neutron is formed, not consumed. In positron emission a proton converts to a neutron: p → n + e+ + ν, so a neutron is formed (b) and the n/p ratio of the daughter increases (c). X-ray emission is not part of this process (a), and (d) is false.

Teacher's Note: Positron emission turns a proton into a neutron, raising n/p.

Exam Note: p → n: neutron formed, not consumed.

One or more correct, Question 17. Select the correct statement(s):
(a) Mass number remains constant when positron emission takes place
(b) One neutron converts into proton in β(−1e0) emission process
(c) Activity of a radioactive substance double when temp. increases from 300 K to 310 K
(d) Isodiaphers formed when one alpha particle emitted and isotopes formed when 2 beta particles emitted

Solution. Answer: (a, b). (a) Positron emission changes Z by −1 but leaves the mass number unchanged. (b) β-emission is n → p + e− + antineutrino. (c) Incorrect: radioactive decay is independent of temperature. (d) Incorrect: emission of two β particles raises Z by two (isobars); isotopes form after one α and two β emissions.

Teacher's Note: Nuclear decay rates ignore temperature; only chemical rates double per 10 K.

Exam Note: Activity is temperature independent.

Level 3 - Match the Column

Match the column, Question 1. Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Column-IColumn-II
(A) Unit of k is always equals to(P) 1/time
(B) Unit of k in zero order(Q) M/time
(C) Unit of k in first order(R) Time−1 M−1
(D) Unit of k in second order(S) Unit of A (pre-exponential factor)

Solution. Answer: A → S; B → Q; C → P; D → R. The unit of k is always the unit of the pre-exponential factor A (S). Zero order: k in M/time (Q). First order: k in 1/time (P). Second order: k in time−1 M−1 (R).

Teacher's Note: Unit of k is (concentration)1−n per time for order n.

Exam Note: k units: M^(1−n) time⁻¹.

Match the column, Question 2. Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Column-IColumn-II
(A) Molecularity of a reaction(P) 0, 1 Possible
(B) Order of reaction(Q) 1, 2 Possible
(C) The dissociation of H2O2 (aq) is(R) First order reaction
(D) H2(g) + Cl2(g) —hν→ 2HCl is(S) Zero order reaction

Solution. Answer: A → Q; B → P, Q; C → R; D → S. Molecularity of an elementary step is 1, 2 (or 3) but never 0, so only (Q) fits (A). Order can be 0, 1 or 2, so (B) fits both (P) and (Q). H2O2 decomposition in water is first order (R). The photochemical formation of HCl is zero order (S) because the rate depends on light intensity, not concentration.

Teacher's Note: Molecularity is never zero; order may be 0; photochemical H₂/Cl₂ is zero order.

Exam Note: Molecularity cannot be zero or fractional.

Match the column, Question 3. Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Column-I (Curve)Column-II (Curve; slope)
(A) C vs t (abscissa) for zero order(P) unity
(B) log C vs t (abscissa) for first order(Q) zero
(C) (−dc/dt) vs C for zero order(R) −k
(D) ln(−dc/dt) vs ln C for first order(S) −k/2.303

Solution. Answer: A → R; B → S; C → Q; D → P. The entries in Column-II are the slopes. Zero order: C = C0 − kt, slope −k (R). First order: log C = log C0 − kt/2.303, slope −k/2.303 (S). Zero order: −dC/dt = k is constant against C, slope 0 (Q). First order: ln(−dC/dt) = ln k + 1·ln C, slope 1 (P).

Teacher's Note: Read slopes off the integrated or differential rate laws after taking logarithms.

Exam Note: Slope of ln rate vs ln C equals order.

Match the column, Question 4. Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Column-I Linear plots (with non zero slope)Column-II (Order)
(A) ln[−d[A]/dt] vs. ln [A](P) 2
(B) loge k vs. 1/T(Q) 1/2
(C) log t1/2 vs. log [A]0(R) 0
(D) −d[A]/dt vs. [A]2(S) 1
[A] = reactant concentration at time ‘t’; k = rate constant; T = absolute temperature.

Solution. Answer: A → P, Q, S; B → P, Q, R, S; C → P, Q, R; D → P. (A) The slope equals the order n, so it is a non-zero slope for n = 2, 1/2 or 1, but zero for n = 0 (excluded R). (B) The slope −Ea/R is non-zero for any order (P, Q, R, S). (C) The slope is 1 − n, non-zero unless n = 1: orders 2, 1/2, 0 (P, Q, R). (D) A straight line against [A]2 exists only for second order (P).

Teacher's Note: Slopes of log-log plots depend on order: n for rate, 1−n for half-life.

Exam Note: Half-life plot has slope zero for first order.

Match the column, Question 5. Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Column-IColumn-II (graphs, described)
(A) log[B] vs t(P) curve rising concavely towards a horizontal dotted asymptote
(B) [A] vs t(Q) curve rising concavely with no asymptote
(C) 1/[A] vs t(R) curve falling and flattening (decaying curve)
(D) ln k vs 1/T(S) straight line of negative slope

Solution. Answer (from key): A → P; B → R; C → Q; D → S. As printed in the book key. The graphs in Column-II are small sketches: (P) a rising curve levelling off at a dotted line, (Q) a rising curve, (R) a falling curve that flattens, (S) a straight falling line. (D) ln k = ln A − Ea/RT is a straight line of negative slope against 1/T (S). The assignment of the other three is taken from the book key.

Teacher's Note: Arrhenius ln k against 1/T is the one straight line with negative slope.

Exam Note: ln k vs 1/T is linear, falling.

Match the column, Question 6. Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Column-IColumn-II
(A) Isotones(P) 91Pa234 and 90Th234 (printed as 19Pa234)
(B) Isobars(Q) 6C12 and 6C14
(C) Isotopes(R) 19K39 and 9F19
(D) Isodiaphers(S) 18Ar39 and 19K40

Solution. Answer: A → S; B → P; C → Q; D → R. Isotones have equal neutrons: Ar-39 has 39 − 18 = 21 and K-40 has 40 − 19 = 21 (S). Isobars have equal mass number: Pa-234 and Th-234 (P). Isotopes have equal Z: C-12 and C-14 (Q). Isodiaphers have equal (n − p): K-39 has 20 − 19 = 1 and F-19 has 10 − 9 = 1 (R).

Teacher's Note: Compare Z, A, neutron count or (n−p) to classify nuclide pairs.

Exam Note: Isodiaphers share n − p.

Match the column, Question 7. Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Column-IColumn-II
(A) α-emission(P) Change in mass no.
(B) β-emission(Q) No change in atomic no. and mass no.
(C) γ-emission(R) Atomic no. decreases
(D) β+ (Positron) emission(S) Atomic no. increases

Solution. Answer: A → P, R; B → S; C → Q; D → R. α-emission lowers mass number by 4 and atomic number by 2 (P, R). β− emission raises Z by 1 with no change in mass number (S). γ-emission changes neither (Q). Positron emission lowers Z by 1 and leaves mass number unchanged (R).

Teacher's Note: Track A and Z changes for α (−4, −2), β⁻ (0, +1), β⁺ (0, −1), γ (0, 0).

Exam Note: β⁺ lowers Z, β⁻ raises Z.

Level 3 - Assertion-Reason Type Questions

Assertion-reason, Question 1. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Molecularity has no meaning for a complex reaction
STATEMENT-2: Molecularity defined only for RDS

Solution. Answer: (C). Statement-1 is true: molecularity applies only to elementary steps, not to an overall complex reaction. Statement-2 is false: molecularity is defined for every elementary step, not only the rate determining step.

Teacher's Note: Molecularity belongs to each elementary step, not only the slowest one.

Exam Note: Molecularity: any elementary step.

Assertion-reason, Question 2. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: An elementary reaction cannot have fractional order.
STATEMENT-2: Stoichiometric coefficients in an elementary reaction can be fractional.

Solution. Answer: (C). Statement-1 is true: order equals molecularity, a whole number. Statement-2 is false: the coefficients of an elementary reaction are whole numbers.

Teacher's Note: Elementary means integer molecularity, hence integer order and coefficients.

Exam Note: Elementary: whole-number coefficients only.

Assertion-reason, Question 3. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Concentration of reactant in zero order reaction is constant.
STATEMENT-2: For zero order reaction ‘A → B’, successive half life of reaction decreases with the progress of the reaction.

Solution. Answer: (D). Statement-1 is false: in a zero order reaction the rate is constant, but the reactant concentration falls linearly. Statement-2 is true: t1/2 = a/2k decreases as the remaining concentration decreases.

Teacher's Note: Constant rate is not constant concentration; half-life depends on remaining amount.

Exam Note: Zero order: t½ ∝ current concentration.

Assertion-reason, Question 4. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Acid catalysed hydrolysis of esters is pseudo first order.
STATEMENT-2: Water is present in excess in given reaction.

Solution. Answer: (A). Both are true. Water in large excess has practically constant concentration, so the rate depends only on the ester, giving pseudo first order behaviour.

Teacher's Note: Excess reagent concentration stays constant and merges into k.

Exam Note: Excess water explains pseudo-first-order.

Assertion-reason, Question 5. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: The order of reaction can have fractional value.
STATEMENT-2: For an elementary reaction, the partial orders are determined by the reaction stoichiometry.

Solution. Answer: (B). Both statements are true, but Statement-2 does not explain Statement-1: fractional order arises for complex reactions, which do not obey the elementary-step stoichiometry rule.

Teacher's Note: Fractional order arises from complex mechanisms, not stoichiometry of elementary steps.

Exam Note: Both true; reason is not the explanation.

Assertion-reason, Question 6. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Catalyst can increase rate constant to a large extent.
STATEMENT-2: By using suitable catalyst, we can significantly increase yield.

Solution. Answer: (C). Statement-1 is true: a catalyst lowers Ea and can raise k enormously. Statement-2 is false: a catalyst does not shift equilibrium, so the equilibrium yield is unchanged; it only gets there faster.

Teacher's Note: Catalysts speed up equilibrium attainment but leave equilibrium yield unchanged.

Exam Note: Catalyst: rate yes, yield no.

Assertion-reason, Question 7. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: For each 10 °C rise of temperature the k is nearly double.
STATEMENT-2: Energy wise distribution of molecules in a gas sample is an exponential function of temperature so e−Ea/RT is doubled.

Solution. Answer: (A). As in the book key, both are taken as true with Statement-2 as the explanation: the fraction of molecules with energy ≥ Ea, e−Ea/RT, roughly doubles for each 10 K rise (typical Ea), so k nearly doubles.

Teacher's Note: Doubling per 10 K comes from the exponential Boltzmann factor.

Exam Note: Key: both true, reason explains.

Assertion-reason, Question 8. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Product can form only when the required orientation and energy conditions are met.
STATEMENT-2: All collisions between reactants yield the desired product.

Solution. Answer: (C). Statement-1 is true (collision theory: threshold energy and proper orientation). Statement-2 is false: only effective collisions give products.

Teacher's Note: Only energetic, properly oriented (effective) collisions lead to products.

Exam Note: Effective collisions need energy and orientation.

Assertion-reason, Question 9. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: The plot of k versus 1/T is linear.
STATEMENT-2: k = A·e−Ea/(RT).

Solution. Answer: (D). Statement-1 is false: k vs 1/T is exponential; it is ln k (or log k) vs 1/T that is linear. Statement-2 is the Arrhenius equation and is true.

Teacher's Note: Linearity needs the logarithm: ln k = ln A − Ea/RT.

Exam Note: Plot ln k, not k, against 1/T.

Assertion-reason, Question 10. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: For exothermic reaction equilibrium constant decreases with increase in temperature.
STATEMENT-2: For exothermic reaction rate constant decreases with decrease in temperature.

Solution. Answer: (B). Both true. K of an exothermic reaction falls with rising T (van’t Hoff, Le Chatelier). The rate constant of every reaction falls as T falls (Arrhenius). Statement-2 does not explain Statement-1.

Teacher's Note: K follows ΔH sign (van’t Hoff); k always follows Arrhenius with temperature.

Exam Note: Equilibrium K and rate k respond differently.

Assertion-reason, Question 11. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: If the activation energy of reaction is zero, temperature will have no effect on the rate constant.
STATEMENT-2: Lower the activation energy faster is the reaction.

Solution. Answer: (B). Both true. With Ea = 0, k = A is temperature independent. Statement-2 is a true general rule but it does not explain why Ea = 0 makes k temperature independent (that follows from the exponent being zero).

Teacher's Note: If Ea = 0 the exponential equals 1 and temperature drops out of k.

Exam Note: Ea = 0 makes k = A.

Assertion-reason, Question 12. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Active complex is an intermediate product.
STATEMENT-2: Active complex is unstable with high vibrational energy.

Solution. Answer: (D). Statement-1 is false: the activated complex is a transition state at the energy maximum, not an intermediate (an intermediate sits in an energy well and can be isolated in principle). Statement-2 is true.

Teacher's Note: Transition state sits at an energy maximum; an intermediate sits in a well.

Exam Note: Activated complex is not an intermediate.

Assertion-reason, Question 13. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: The pre-exponential factor A has the same units for all reactions.
STATEMENT-2: e−Ea/RT has no unit.

Solution. Answer: (D). Statement-1 is false: A has the units of k, which depend on the order of the reaction. Statement-2 is true.

Teacher's Note: A takes the units of k, so they vary with order.

Exam Note: Units of A depend on reaction order.

Assertion-reason, Question 14. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: γ-rays have very high penetrating power.
STATEMENT-2: γ-rays are electromagnetic radiations of high energy.

Solution. Answer: (A). Both true. γ-rays are high-energy photons with no mass or charge, so they penetrate matter deeply; the high energy and neutrality explain the penetrating power.

Teacher's Note: Uncharged high-energy photons lose energy slowly, so they penetrate deeply.

Exam Note: Penetration comes from neutrality and energy.

Assertion-reason, Question 15. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Nuclide 13Al30 is less stable than 20Ca40.
STATEMENT-2: Nuclide having odd number of protons and neutrons are generally unstable.

Solution. Answer: (B). Both true. Al-30 has 13 protons and 17 neutrons (odd, odd) while Ca-40 is even-even and doubly magic. The odd-odd rule is a general fact but is not the only reason Al-30 is unstable (its n/p ratio is also too high).

Teacher's Note: Even-even nuclei are most stable; odd-odd are often unstable.

Exam Note: Both true; reason is not the full explanation.

Assertion-reason, Question 16. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Disintegration of 1H3 (tritium) is accompanied by β-emission.
STATEMENT-2: Tritium has high n/p ratio.

Solution. Answer: (A). Both true. Tritium has 2 neutrons and 1 proton (n/p = 2, above the stable value), so a neutron converts to a proton with β− emission, giving 2He3.

Teacher's Note: High n/p lowers by neutron-to-proton conversion, emitting β⁻.

Exam Note: High n/p means β⁻ emission.

Assertion-reason, Question 17. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: The life of radioactive object (organic origin) can be found with the help of carbon dating.
STATEMENT-2: 6C14 is a α and β-emitter.

Solution. Answer: (C). Statement-1 is true. Statement-2 is false: C-14 is a pure β− emitter (6C14 → 7N14 + −1e0).

Teacher's Note: C-14 decays only by β⁻ to N-14.

Exam Note: C-14 emits only β⁻.

Assertion-reason, Question 18. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Neutrons are the best bombarding particles.
STATEMENT-2: Neutrons are neutral particles.

Solution. Answer: (A). Both true. Being uncharged, neutrons are not repelled by the positively charged nucleus, so even slow neutrons can induce nuclear reactions.

Teacher's Note: No charge means no Coulomb repulsion from the target nucleus.

Exam Note: Neutrality removes Coulomb repulsion.

Assertion-reason, Question 19. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Nucleus does not contain free electrons, yet it emit beta-particles.
STATEMENT-2: At high n/p ratio, one neutron supposed to give 1 proton and 1 e− (β).

Solution. Answer: (A). Both true. A neutron converts to a proton, an electron (the β-particle) and an antineutrino at the moment of emission, so no free electron needs to exist in the nucleus.

Teacher's Note: Beta electron is created in n → p + e⁻ at decay, not pre-existing.

Exam Note: β particle is created, not stored.

Assertion-reason, Question 20. Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Options: (A) both statements TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both TRUE but STATEMENT-2 is NOT the correct explanation; (C) STATEMENT-1 TRUE and STATEMENT-2 FALSE; (D) STATEMENT-1 FALSE and STATEMENT-2 TRUE.
STATEMENT-1: Rate of disintegration of thorium increases with the increase in moles of thorium.
STATEMENT-2: Rate of disintegration does not depend upon temperature, pressure.

Solution. Answer: (B). Both true. Activity = λN is proportional to the number of nuclei present (Statement-1). Independence from T and P is also true, but it is not the reason for the dependence on N.

Teacher's Note: Activity is λN: proportional to amount, independent of T and P.

Exam Note: Both true; reason is unrelated.

Level 3 - Subjective Problems

Subjective, Question 1. The rate of decomposition of NH3(g) at 10 atm on platinum surface is zero order. What is rate of formation (in M min−1) of H2(g), if rate constant of reaction 2NH3(g) → N2(g) + 3H2(g) is 2.0 M min−1?

Solution. Answer: 6. For a zero order reaction the rate of reaction r = k = 2.0 M min−1, where r = −(1/2) d[NH3]/dt = d[N2]/dt = (1/3) d[H2]/dt. So d[H2]/dt = 3k = 3 × 2 = 6 M min−1.

Teacher's Note: Rate of reaction defined per stoichiometric coefficient; scale by 3 for H₂.

Exam Note: Rate of formation = coefficient × k.

Subjective, Question 2. 5A → Product. In above reaction, half-life period is directly proportional to initial concentration of reactant. The initial rate of reaction is 400 mol lit−1 min−1. Calculate the half-life period (in sec) when initial concentration of reactant is 200 mol lit−1.

Solution. Answer: 3. Half-life directly proportional to initial concentration means zero order. Rate of reaction = 400 mol L−1 min−1 with coefficient 5, so −d[A]/dt = 5 × 400 = 2000 mol L−1 min−1 = k′. t1/2 = a/(2k′) = 200/(2 × 2000) = 0.05 min = 3 s.

Teacher's Note: Zero order: t½ = a/2k; convert the rate of reaction to the rate of A disappearance first.

Exam Note: Multiply by 5; convert min to seconds.

Subjective, Question 3. In an elementary reaction A(g) + 2B(g) → C(g) the initial pressure of A and B are PA = 0.40 atm and PB = 0.60 atm respectively. After time T, if pressure of C is observed 0.1 atm, then find the value of ri (initial rate of reaction)/rt (rate of reaction after time t).

Solution. Answer: 3. Rate = kPAPB2. Initially PAPB2 = 0.4 × 0.36 = 0.144. After PC = 0.1: PA = 0.3, PB = 0.6 − 0.2 = 0.4, so PAPB2 = 0.3 × 0.16 = 0.048. ri/rt = 0.144/0.048 = 3.

Teacher's Note: B drops by twice the C formed; plug into the elementary rate law.

Exam Note: Use P_B = 0.6 − 2(0.1).

Subjective, Question 4. The rate of decomposition of NH3(g) at 10 atm on platinum surface is zero order. What is rate of formation (in M min−1) of H2(g) if rate constant of reaction 2NH3(g) → N2(g) + 3H2(g) is 2.0 M min−1? (This question repeats Question 1 of this section.)

Solution. Answer: 6. As in Question 1: rate of reaction = k = 2.0 M min−1 = (1/3) d[H2]/dt, so d[H2]/dt = 3k = 3 × 2 = 6 M min−1.

Teacher's Note: Zero order rate equals k; hydrogen forms three times faster than the reaction rate.

Exam Note: Rate of H₂ = 3 × rate of reaction.

Subjective, Question 5. Carbon monoxide reacts with O2 to form CO2: 2CO(g) + O2(g) → 2CO2(g). Information on this reaction is given in the table below.

[CO] mol/L[O2] mol/LRate of reaction (mol/L·min)
0.020.024 × 10−5
0.040.021.6 × 10−4
0.020.048 × 10−5
What is the value for the rate constant for the reaction in proper related unit?

Solution. Answer: 5 (in L2 mol−2 min−1). Doubling [CO] at constant [O2] raises the rate from 4 × 10−5 to 1.6 × 10−4, a factor of 4, so the order in CO is 2. Doubling [O2] doubles the rate, so the order in O2 is 1. Rate = k[CO]2[O2], k = 4 × 10−5/[(0.02)2(0.02)] = 4 × 10−5/8 × 10−6 = 5 L2 mol−2 min−1. (Answer from key, verified.)

Teacher's Note: Method of initial rates: double one concentration at a time to find each order.

Exam Note: Third order, so units are L² mol⁻² min⁻¹.

Subjective, Question 6. Half-life for the zero order reaction X(g) → Y(g) + Z(g) and half-life for the first order reaction A(g) → B(g) + C(g) are equal. If completion time for the zero order reaction is 13.86 min, then calculate the rate constant (in hr−1) for the reaction A(g) → B(g) + C(g).

Solution. Answer: 6. For the zero order reaction tcompletion = a/k = 13.86 min, so t1/2 = a/2k = 6.93 min. For the first order reaction t1/2 = 0.693/k′ = 6.93 min, so k′ = 0.1 min−1 = 6 hr−1.

Teacher's Note: Zero order half-life is half the completion time; first order uses 0.693/k.

Exam Note: Convert 0.1 min⁻¹ to hr⁻¹.

Subjective, Question 7. For any acid catalysed reaction, A —H+→ B. Half-life period is independent of concentration of A at given pH. At same concentration of A half-life time is 10 min at pH = 2 and half-life time is 100 min at pH = 3. If the rate law expression of reaction is r = k[A]x[H+]y then calculate the value of (x + y).

Solution. Answer: 2. Half-life independent of [A] means first order in A, so x = 1. At pH 2 [H+] = 10−2 M and at pH 3 it is 10−3 M, a tenfold fall, while t1/2 rises tenfold (10 to 100 min), i.e. t1/2 ∝ 1/[H+], so y = 1. x + y = 2.

Teacher's Note: Half-life independent of [A] gives first order; compare half-lives at two pH values.

Exam Note: pH change of 1 is a tenfold [H⁺].

Subjective, Question 8. For a reaction, A ⇌ B equilibrium constant is 1.66 and kforward = 0.166 hr−1. Calculate the time (in hours) when concentration of B is 80% of its equilibrium concentration. (Given: ln 25 = 3.20)

Solution. Answer: 6. K = kf/kb = 1.66 gives kb = 0.1 hr−1, so kf + kb = 0.266 hr−1. (kf + kb)t = ln[xe/(xe − 0.8xe)] = ln 5 = 1.6 (since ln 25 = 3.20). t = 1.6/0.266 = 6.0 hr.

Teacher's Note: Approach to equilibrium follows (k_f + k_b); 80% of x_e leaves 20% to go.

Exam Note: Compute k_b from K first.

Subjective, Question 9. For a reaction A ⇌ B equilibrium constant is 1.66 and kforward = 0.166 hr−1. Calculate the time (in hours) when concentration of B is 80% of its equilibrium concentration. (Given: ln 25 = 3.20) (This question repeats Question 8 of this section.)

Solution. Answer: 6. As in Question 8: kb = 0.166/1.66 = 0.1 hr−1, (kf + kb)t = ln 5 = 1.6, so t = 1.6/0.266 = 6 hr.

Teacher's Note: Reversible first-order approach: time scale is 1/(k_f + k_b).

Exam Note: Use ln 5 = ½ ln 25.

Subjective, Question 10. A reacts by three parallel paths: A —k1→ 3B, A —k2→ 8C, A —k3→ 3D; at time t = 0 (initial mole) of A is 1. Overall half life of the reaction is 15 days then calculate the number of mole of C after 45 days in terms of 102 if the ratio of k1 : k2 : k3 is 2 : 2 : 3.

Solution. Answer: 2 mol of C (that is 2 × 100, or 200 in units of 10−2). The digit printed in the answer key for this problem is not legible in the scan, so the result is computed here. 45 days = 3 half-lives, so A left = 1/8 and 7/8 mol of A has reacted. A fraction k2/(k1 + k2 + k3) = 2/7 of the reacted A goes by path 2: (7/8) × (2/7) = 0.25 mol A. Each A gives 8 C, so C = 0.25 × 8 = 2 mol. Corrected: key reading not possible; value computed independently.

Teacher's Note: Parallel paths share reacted A in the ratio of their k; then apply the coefficient 8.

Exam Note: Fraction to C is k₂/Σk, times 8.

Subjective, Question 11. Iodine-131 is a radioactive isotope. If 1.0 mg of 131I has an activity of 4.6 × 1012 Bq. What is the half-life of 131I (in days)?

Solution. Answer: 8. N = (1.0 × 10−3 g/131 g mol−1) × 6.022 × 1023 = 4.6 × 1018 atoms. λ = A/N = 4.6 × 1012/4.6 × 1018 = 1.0 × 10−6 s−1. t1/2 = 0.693/λ = 6.93 × 105 s = 8.02 days ≈ 8 days.

Teacher's Note: Convert mass to atoms, get λ = activity/N, then half-life in days.

Exam Note: Divide seconds by 86400.

Subjective, Question 12. The average life of a radioactive element is 7.2 min. Calculate the time interval (in min.) between the stages of 33.33% and 66.66% decay.

Solution. Answer: 5. λ = 1/7.2 min−1. At 33.33% decay 66.67% remains; at 66.66% decay 33.33% remains. The time between these stages is t = (1/λ) ln(66.67/33.33) = 7.2 × ln 2 = 7.2 × 0.693 ≈ 5 min (i.e. one half-life).

Teacher's Note: Time between two stages depends on their ratio, here 2:1, which is one half-life.

Exam Note: Average life 7.2 min gives t½ ≈ 5 min.

Subjective, Question 13. A, B and C are isodiaphers while C, D and E are isobars. Calculate the difference of protons between A and E. 82A206 → B → C → D → E. Given: Isodiaphers and isobars are formed in successive α and β-emission respectively.

Solution. Answer: 2. A, B, C isodiaphers: A → B and B → C are α-emissions, each lowering Z by 2: C has Z = 82 − 4 = 78. C, D, E isobars: C → D and D → E are β-emissions, each raising Z by 1: E has Z = 78 + 2 = 80. Difference in protons between A and E = 82 − 80 = 2.

Teacher's Note: α emission gives isodiaphers, β emission gives isobars; count protons through each step.

Exam Note: α: Z−2 each; β: Z+1 each.

Subjective, Question 14. In the given radioactive disintegration series 90Th232 → 82Pb208. Calculate value of (n + 2). Where value of n is number of isobars formed in this series, suppose there is successive emission of β-particles.

Solution. Answer: 7. α-particles emitted = (232 − 208)/4 = 6. Atomic number: 90 − 2(6) + y = 82 gives y = 4 β-particles. Successive β-emissions leave the mass number unchanged, so the four β steps give a chain of 5 isobars (the nuclide before the first β and the 4 after it). n = 5 and n + 2 = 7.

Teacher's Note: Number of α fixes mass change; β count from charge balance; isobars come from the β chain.

Exam Note: Four β steps give five isobars.

Subjective, Question 15. In the given radioactive disintegration series 92U235 → 82Pb207. Calculate difference between number of α and number of β particles emitted in this series.

Solution. Answer: 3. α-particles = (235 − 207)/4 = 7. Atomic number: 92 − 2(7) + y = 82 gives y = 4 β-particles. Difference = 7 − 4 = 3.

Teacher's Note: Mass number gives α count; charge balance gives β count.

Exam Note: Z balance: 92 − 2x + y = 82.

Step-by-Step Narendra Awasthi Solutions for JEE Math

Complete Math Solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 7 Chemical Kinetics Nuclear Chemistry Part 2

Explore reliable mathematical solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 7 Chemical Kinetics Nuclear Chemistry Part 2 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your JEE Exam Preparation

In addition to these Narendra Awasthi Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.