Narendra Awasthi Solutions Physical Chemistry Chapter 7 Chemical Kinetics Nuclear Chemistry Part 1

Official Narendra Awasthi Textbook Solutions: JEE Chemistry Chapter 07 Chemical Kinetics Nuclear Chemistry

Explore reliable textbook solutions for Chapter 07 Chemical Kinetics Nuclear Chemistry tailored for JEE learners using Narendra Awasthi methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Chapter-wise Solutions for Chemistry: Chapter 07 Chemical Kinetics Nuclear Chemistry

View or download the dedicated Chapter 07 Chemical Kinetics Nuclear Chemistry solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Chapter 7 Chemical Kinetics and Nuclear Chemistry - Level 1 Questions 1-150

Level 1

Question 1. The differential rate law equation for the elementary reaction A + 2B →(k) 3C is:
(a) −d[A]/dt = −d[B]/dt = d[C]/dt = k[A][B]2
(b) −d[A]/dt = −(1/2) d[B]/dt = (1/3) d[C]/dt = k[A]2[B]
(c) −d[A]/dt = −(1/2) d[B]/dt = (1/3) d[C]/dt = k[A][B]2
(d) None of these

Solution. Answer: (c). For an elementary reaction the rate law follows the stoichiometry, so rate = k[A][B]2. Rate of reaction = −d[A]/dt = −(1/2) d[B]/dt = (1/3) d[C]/dt, each divided by its coefficient.

Teacher's Note: Divide each rate of change by its stoichiometric coefficient; elementary means exponents equal coefficients.

Exam Note: Divide by coefficients; exponents equal coefficients.

Question 2. The rate of reaction is expressed in different ways as follows: +(1/2) d[C]/dt = −(1/3) d[D]/dt = +(1/4) d[A]/dt = −d[B]/dt. The reaction is:
(a) 4A + B → 2C + 3D
(b) B + 3D → 4A + 2C
(c) A + B → C + D
(d) B + D → A + C

Solution. Answer: (b). A positive sign means the substance is formed, a negative sign means it is consumed. So C and A are products (coefficients 2 and 4) and D and B are reactants (coefficients 3 and 1): B + 3D → 4A + 2C.

Teacher's Note: Positive sign means product, negative means reactant; the fractions give coefficients.

Exam Note: Read signs first, then coefficients.

Question 3. In the reaction A + 2B → 6C + 2D, if the initial rate −d[A]/dt at t = 0 is 2.6 × 10−2 M s−1, what will be the value of −d[B]/dt at t = 0?
(a) 8.5 × 10−2 M s−1 (b) 2.5 × 10−2 M s−1 (c) 5.2 × 10−2 M s−1 (d) 7.5 × 10−2 M s−1

Solution. Answer: (c). Rate = −d[A]/dt = −(1/2) d[B]/dt, so −d[B]/dt = 2 × 2.6 × 10−2 = 5.2 × 10−2 M s−1.

Teacher's Note: B is consumed twice as fast as A because its coefficient is 2.

Exam Note: Multiply by the coefficient ratio 2:1.

Question 4. For the reaction 2A → B + 3C; if −d[A]/dt = k1[A]2; d[B]/dt = k2[A]2; d[C]/dt = k3[A]2, the correct relation between k1, k2 and k3 is:
(a) k1 = k2 = k3 (b) 2k1 = k2 = 3k3 (c) 4k1 = k2 = 3k3 (d) k1/2 = k2 = k3/3

Solution. Answer: (d). Rate of reaction = −(1/2) d[A]/dt = d[B]/dt = (1/3) d[C]/dt, so k1[A]2/2 = k2[A]2 = k3[A]2/3, giving k1/2 = k2 = k3/3.

Teacher's Note: Equate the stoichiometry-normalised rates; the common [A]2 cancels.

Exam Note: Normalise each rate by its coefficient, then equate.

Question 5. The rate constant of nth order has units:
(a) litre1−n mol1−n sec−1 (b) mol1−n litre1−n sec (c) mol1−n2 litren2 sec−1 (d) mole1−n litren−1 sec−1

Solution. Answer: (d). Rate (mol L−1 s−1) = k (mol L−1)n, so k has units mol1−n Ln−1 s−1. Check: n = 1 gives s−1; n = 2 gives L mol−1 s−1.

Teacher's Note: Divide the units of rate by (concentration)n; test with n = 1 and 2.

Exam Note: Test the options with n = 1 and n = 2.

Question 6. Which of the following statement is incorrect?
(a) Unit of rate of disappearance is Ms−1
(b) Unit of rate of reaction is Ms−1
(c) Unit of rate constant k depends upon order
(d) Unit of k for first order reaction is Ms−1

Solution. Answer: (d). For a first order reaction k has units s−1 (time−1), not M s−1. Statements (a), (b), (c) are correct.

Teacher's Note: First order k has units of time−1; M s−1 belongs to zero order k.

Exam Note: First order: s−1; zero order: M s−1.

Question 7. Which of the following relation is correct for kf and kb in an equilibrium process that contains equal moles of reactants and products?
(a) kf = kb (b) kf > kb (c) kf < kb (d) we cannot predict

Solution. Answer: (d). Keq = kf/kb = (concentration of products as per rate law)/(concentration of reactants as per rate law). Equal moles do not fix Keq; the stoichiometry of the reaction is also needed, so the relation cannot be predicted.

Teacher's Note: Equal moles at equilibrium do not mean K = 1; K also depends on stoichiometry.

Exam Note: K = kf/kb needs the stoichiometry.

Question 8. Listed in the table are forward and reverse rate constants for the reaction 2NO(g) ⇌ N2(g) + O2(g):
Temperature (K)kf (M−1 s−1)kb (M−1 s−1)
14000.291.1 × 10−6
15001.31.4 × 10−5
Select the correct statement:
(a) Reaction is exothermic and value of equilibrium constant (Keq) at 1400 K is 3.79 × 10−6
(b) Reaction is endothermic and value of Keq at 1400 K is 2.63 × 105
(c) Reaction is exothermic and value of Keq at 1400 K is 2.63 × 105
(d) Reaction is endothermic and value of Keq at 1500 K is 9.28 × 104

Solution. Answer: (c). Keq = kf/kb. At 1400 K: 0.29/(1.1 × 10−6) = 2.63 × 105. At 1500 K: 1.3/(1.4 × 10−5) = 9.28 × 104. Keq decreases as temperature rises, so the reaction is exothermic.

Teacher's Note: Keq = kf/kb; K falling with rising T means exothermic.

Exam Note: Compute K at both T, compare direction.

Question 9. The rate constant of a reaction depends on
(a) temperature (b) pressure (c) extent of reaction (d) initial concentration of the reactant

Solution. Answer: (a). The rate constant depends only on temperature (and catalyst); it is independent of concentration, pressure and extent of reaction.

Teacher's Note: k changes with temperature (Arrhenius), not with concentration.

Exam Note: k depends on temperature and catalyst only.

Question 10. In the following reaction, how is the rate of appearance of the underlined product related to the rate of disappearance of the underlined reactant? BrO3−(aq) + 5Br−(aq) + 6H+(aq) → 3Br2(l) + 3H2O(aq) (underlined: BrO3− and Br2)
(a) −d[BrO3−]/dt = d[Br2]/dt (b) −(1/3) d[BrO3−]/dt = d[Br2]/dt (c) −d[BrO3−]/dt = (1/3) d[Br2]/dt (d) None of these

Solution. Answer: (c). Rate = −d[BrO3−]/dt/1 = (1/3) d[Br2]/dt, because the coefficients are 1 for BrO3− and 3 for Br2.

Teacher's Note: Rate of reaction is the same whichever species you track, after dividing by coefficient.

Exam Note: Divide each rate by its coefficient, then equate.

Question 11. Consider a reaction A(g) →(k = 0.1 M min−1) 2B(g). If the initial concentration of A is 0.5 M then select the correct graph of [B] against time. Options (graphs of [B] versus time in min): (a) [B] rises linearly from 0 to 0.5 M at 5 min, then stays constant; (b) [B] rises linearly, passing 0.5 M at 5 min and reaching 1.0 M at 10 min, and keeps rising; (c) [B] rises linearly from 0 to 1.0 M at 5 min, then stays constant; (d) [B] rises linearly, passing 1.0 M at 5 min and reaching 2.0 M at 10 min, and keeps rising.

Solution. Answer: (c). The unit of k (M min−1) shows zero order, so x = kt. A is used up at t = a/k = 0.5/0.1 = 5 min. Since A → 2B, the final [B] = 2 × 0.5 = 1.0 M. So [B] rises linearly to 1.0 M at 5 min and then stays constant.

Teacher's Note: Zero order: A finishes at a/k; each A gives two B, so [B] ends at 2a.

Exam Note: Find completion time a/k, then final [B] = 2a.

Question 12. Which of the following statements is incorrect?
(a) A second order reaction must be a bimolecular elementary reaction
(b) A bimolecular elementary reaction must be a second order reaction
(c) Zero order reaction must be a complex reaction
(d) First order reaction may be complex or elementary reaction

Solution. Answer: (a). A second order reaction need not be elementary or bimolecular; it can be a complex reaction whose rate law happens to be second order. The other statements are correct.

Teacher's Note: Order is experimental and can belong to complex reactions; molecularity applies only to elementary steps.

Exam Note: Order does not imply molecularity; the converse holds.

Question 13. The molecularity of a complex reaction given below is: 2N2O5(g) → 4NO2(g) + O2(g)
(a) 1 (b) 2 (c) 3 (d) has no meaning

Solution. Answer: (d). Molecularity is defined only for an elementary reaction (a single step). For a complex (multi-step) reaction it has no meaning.

Teacher's Note: Molecularity belongs to elementary steps only; overall equations are not steps.

Exam Note: Complex reaction: molecularity has no meaning.

Question 14. Decomposition of NH4NO2(aq) into N2(g) and 2H2O(l) is a first order reaction. Which of the following graphs of [NH4NO2] against time is correct? Options: (a) a horizontal line; (b) a straight line rising; (c) a straight line falling; (d) a curve falling steeply at first and flattening out (exponential decay).

Solution. Answer: (d). For a first order reaction [R] = [R]0e−kt, so the concentration of the reactant falls exponentially with time, a curve that is steep at first and flattens, never reaching zero.

Teacher's Note: First order concentration-time curve is exponential decay, not a straight line.

Exam Note: Zero order is linear; first order is exponential.

Question 15. Decomposition of HI(g) on gold surface is a zero order reaction. Initially a few moles of H2 are present in the container; which of the following graphs of PH2 against time is correct? Options: (a) a horizontal line; (b) a straight line rising with a non-zero intercept on the P axis; (c) a straight line rising from the origin; (d) a straight line falling.

Solution. Answer: (b). Zero order means H2 is formed at a constant rate, so its pressure rises linearly with time. Since some H2 was present at the start, the line starts from a positive intercept, not from the origin.

Teacher's Note: Zero order gives a linear change; initial H2 gives a non-zero intercept.

Exam Note: Linear rise with positive intercept.

Question 16. Consider the plots for the types of reaction nA → B + C. Plot (i): −d[A]/dt against [A], a straight line rising from the origin. Plot (ii): [A] against t, a straight line falling. Plot (iii): 1/[A] against t, drawn as a straight line (as printed in the book, falling). These plots respectively correspond to the reaction orders:
(a) 0, 2, 1 (b) 0, 1, 2 (c) 1, 1, 2 (d) 1, 0, 2

Solution. Answer: (d). (i) Rate proportional to [A] is first order. (ii) A linear [A] against t plot means zero order. (iii) A linear 1/[A] against t plot means second order. Order = 1, 0, 2. (Note: for second order, 1/[A] actually rises with t; the book draws it falling.)

Teacher's Note: Match each straight-line plot: rate vs [A] (1st), [A] vs t (0th), 1/[A] vs t (2nd).

Exam Note: Learn the linear plot for each order.

Question 17. If decomposition reaction A(g) → B(g) follows first order kinetics then the graph of rate of formation (R) of B against time t will be: Options: (a) a curve rising and levelling off; (b) a curve rising with increasing slope; (c) a decaying curve falling from a maximum at t = 0 towards zero; (d) a curve rising to a maximum and then falling.

Solution. Answer: (c). Rate of formation of B = k[A], and [A] decays exponentially with time, so the rate is highest at t = 0 and falls exponentially towards zero.

Teacher's Note: Rate follows [A] for first order, so it decays exponentially.

Exam Note: Rate ∝ [A], hence decaying curve.

Question 18. Consider the plots, given below, for the types of reaction nA → B + C. Plot (I): t1/2 against [A], a horizontal line. Plot (II): t1/2 against [A], a straight line rising through the origin. Plot (III): t1/2 against 1/[A], a straight line rising through the origin. These plots respectively correspond to the reaction orders:
(a) 0, 1, 2 (b) 1, 2, 0 (c) 1, 0, 2 (d) None of these

Solution. Answer: (c). (I) t1/2 independent of [A] means first order. (II) t1/2 ∝ [A] means zero order. (III) t1/2 ∝ 1/[A] means second order. So the orders are 1, 0, 2.

Teacher's Note: Relate half-life to a: 1st independent, 0th ∝ a, 2nd ∝ 1/a.

Exam Note: Half-life dependence on a fixes the order.

Question 19. For a zero order reaction, the plot of conc. (a − x) vs time is linear with
(a) + ve slope and zero intercept (b) − ve slope and zero intercept (c) + ve slope and non-zero intercept (d) − ve slope and non-zero intercept

Solution. Answer: (d). For zero order, x = kt, so a − x = a − kt. This is a straight line with slope −k (negative) and intercept a (non-zero).

Teacher's Note: Write a − x = a − kt and read slope and intercept.

Exam Note: a − x = a − kt: negative slope, intercept a.

Question 20. What will be the order of reaction for a chemical change having log t1/2 vs log a? (where a = initial concentration of reactant; t1/2 = half-life). The graph is a straight line of slope 1 (45° to the log a axis).
(a) Zero order (b) First order (c) Second order (d) None of these

Solution. Answer: (a). t1/2 ∝ a1−n, so log t1/2 = (1−n) log a + constant. The slope 1 gives 1 − n = 1, so n = 0 (zero order).

Teacher's Note: Slope of log t1/2 against log a equals 1 − n.

Exam Note: Slope = 1 − n.

Question 21. A graph between log t1/2 and log a (abscissa), a being the initial concentration of A in the reaction A → Product, has a slope of −1. The rate law is:
(a) −d[A]/dt = K (b) −d[A]/dt = K[A] (c) −d[A]/dt = K[A]2 (d) −d[A]/dt = K[A]3

Solution. Answer: (c). Slope = 1 − n = −1, so n = 2. The rate law is −d[A]/dt = K[A]2.

Teacher's Note: Slope = 1 − n, so slope −1 means n = 2.

Exam Note: Slope −1 gives second order.

Question 22. Consider the reaction A → B. The graph between half-life (t1/2) and initial concentration (a) of the reactant is a straight line rising from the origin. Hence the graph between −d[A]/dt and time will be: Options: (a) a straight line falling; (b) a curve falling like a hyperbola; (c) a horizontal line; (d) a straight line rising.

Solution. Answer: (c). t1/2 ∝ a shows a zero order reaction. For zero order the rate −d[A]/dt = k is constant, so the graph against time is a horizontal line.

Teacher's Note: Half-life proportional to a means zero order, so rate is constant.

Exam Note: t1/2 ∝ a: zero order, constant rate.

Question 23. For the ideal gaseous reaction, the rate is generally expressed in terms of dP/dt instead of dC/dt or dn/dt (where C = n/V is concentration and n the number of moles). What is the relation among these three expressions if T and V are constant?
(a) dC/dt = dn/dt = dP/dt (b) dC/dt = (1/V) dn/dt = (1/RT) dP/dt (c) RT dC/dt = dn/dt = dP/dt (d) None of these

Solution. Answer: (b). C = n/V = P/RT, so dC/dt = (1/V) dn/dt = (1/RT) dP/dt at constant T and V.

Teacher's Note: Use C = n/V = P/RT and differentiate at constant T and V.

Exam Note: Use PV = nRT, C = P/RT.

Question 24. A2 + B2 → 2AB; R.O.R. = k[A2]a[B2]b.
Initial [A2]Initial [B2]R.O.R. (r) Ms−1
0.20.20.04
0.10.40.04
0.20.40.08
Order of reaction with respect to A2 and B2 are respectively:
(a) a = 1, b = 1 (b) a = 2, b = 0 (c) a = 2, b = 1 (d) None

Solution. Answer: (a). Experiments 1 and 3: [A2] constant, [B2] doubled, rate doubled, so b = 1. Experiments 1 and 2: [A2] halved and [B2] doubled gives the same rate: (1/2)a × 21 = 1, so a = 1.

Teacher's Note: Change one variable at a time between rows to separate the exponents.

Exam Note: Compare rows; isolate one concentration.

Question 25. For a reaction the initial rate is given as: R0 = k[A]02[B]0. By what factor will the initial rate of reaction increase if initial concentration of A is taken 1.5 times and of B is tripled?
(a) 4.5 (b) 2.25 (c) 6.75 (d) None of these

Solution. Answer: (c). New rate/old rate = (1.5)2 × 3 = 2.25 × 3 = 6.75.

Teacher's Note: Raise each concentration factor to its order, then multiply.

Exam Note: Factor = (1.5)2 × 3.

Question 26. For A(s) + B(s) → C(s); rate = k[A]1/2[B]2, if initial concentration of A and B are increased by factors 4 and 2 respectively, then the initial rate is changed by the factor:
(a) 4 (b) 6 (c) 8 (d) None of these

Solution. Answer: (c). Rate = k[A]1/2[B]2. Factor = 41/2 × 22 = 2 × 4 = 8.

Teacher's Note: Raise each factor to its exponent: 41/2 = 2 and 22 = 4.

Exam Note: Multiply 41/2 by 22.

Question 27. Reaction A → B follows second order kinetics. Doubling the concentration of A will increase the rate of formation of B by a factor of:
(a) 1/4 (b) 1/2 (c) 2 (d) 4

Solution. Answer: (d). Rate ∝ [A]2, so doubling [A] multiplies the rate by 22 = 4.

Teacher's Note: Second order: rate scales as the square of concentration.

Exam Note: Rate factor = 22 = 4.

Question 28. (Questions 28 and 29) The reaction of A2 and B2 follows the equation A2(g) + B2(g) → 2AB(g). The following data were observed:
[A2]0[B2]0Initial rate of appearance of AB(g) (in M s−1)
0.100.102.5 × 10−4
0.200.105 × 10−4
0.200.2010 × 10−4
Question 28. The value of rate constant for the written reaction is:
(a) 2.5 × 10−4 (b) 2.5 × 10−2 (c) 1.25 × 10−2 (d) None of these

Solution. Answer: (c). Doubling either concentration doubles the rate, so the rate is first order in each: rate = k[A2][B2]. Rate of reaction = (1/2) d[AB]/dt = (1/2)(2.5 × 10−4) = 1.25 × 10−4 = k(0.1)(0.1), so k = 1.25 × 10−2 M−1 s−1.

Teacher's Note: Rate of the written reaction is half the rate of appearance of AB.

Exam Note: Rate of reaction = (1/2) rate of AB formation.

Question 29. Above given question (Questions 28 and 29 data), the value of rate constant for appearance of AB(g) is:
(a) 2.5 × 10−4 (b) 2.5 × 10−2 (c) 1.25 × 10−2 (d) None of these

Solution. Answer: (b). For the appearance of AB, d[AB]/dt = kAB[A2][B2]: 2.5 × 10−4 = kAB(0.1)(0.1), so kAB = 2.5 × 10−2 M−1 s−1.

Teacher's Note: k for a product equals the rate of its formation divided by the concentration product.

Exam Note: Use d[AB]/dt directly, no half factor.

Question 30. The following data pertain to reaction between A and B:
S. No[A] mol L−1[B] mol L−1Rate mol L−1 sec−1
I1 × 10−22 × 10−22 × 10−4
II2 × 10−22 × 10−24 × 10−4
III2 × 10−24 × 10−28 × 10−4
Which of the following inference(s) can be drawn from the above data: (a) Rate constant of the reaction 10−4; (b) Rate law of the reaction is k[A][B]; (c) Rate of reaction increases four times on doubling the concentration of both the reactant. Select the correct answer codes:
(a) a, b and c (b) a and b (c) b and c (d) c alone

Solution. Answer: (c). I to II: [A] doubled, rate doubled, so first order in A. II to III: [B] doubled, rate doubled, so first order in B. Rate = k[A][B], so (b) is true. k = 2 × 10−4/(10−2 × 2 × 10−2) = 1 L mol−1 s−1, so (a) is false. Doubling both gives 2 × 2 = 4 times, so (c) is true. Hence b and c.

Teacher's Note: Find each order by doubling one concentration at a time, then test each statement.

Exam Note: Compute k explicitly to test statement (a).

Question 31. The unit of rate constant of elementary reaction depends upon the:
(a) temperature of the reaction (b) concentration of reactant (c) activation energy of the reaction (d) molecularity of the reaction

Solution. Answer: (d). For an elementary reaction, order = molecularity, and the unit of k depends on the order, hence on the molecularity.

Teacher's Note: Unit of k depends on order; for elementary steps order equals molecularity.

Exam Note: Unit of k follows order = molecularity.

Question 32. Select the rate law that corresponds to the data shown for the reaction A + B → C:
Exp.[A][B]Rate
1.0.0120.0350.10
2.0.0240.0700.80
3.0.0240.0350.10
4.0.0120.0700.80
(a) Rate = k[B]3 (b) Rate = k[B]4 (c) Rate = k[A][B]3 (d) Rate = k[A]2[B]2

Solution. Answer: (a). Experiments 1 and 3: [A] doubled, rate unchanged, so zero order in A. Experiments 1 and 4: [B] doubled, rate ×8 = 23, so third order in B. Rate = k[B]3.

Teacher's Note: Rate unchanged on doubling A means order 0; ×8 on doubling B means order 3.

Exam Note: Doubling and rate ratio give the exponent.

Question 33. An elementary reaction between A and B is a second order reaction. Which of the following rate equations must be correct?
(a) r = k[A]2[B]0 (b) r = k[A]3/2[B]1/2 (c) r = k[A]0[B]2 (d) r = k[A][B]

Solution. Answer: (d). An elementary reaction between one A and one B (bimolecular) has rate = k[A][B]. Fractional or zero exponents are impossible for elementary reactions between A and B.

Teacher's Note: Elementary exponents equal the number of molecules of each reactant in the step.

Exam Note: Elementary A + B step: r = k[A][B].

Question 34. If a is the initial concentration of the reactant, the half-life period of the reaction of nth order is inversely proportional to:
(a) an−1 (b) an (c) a1−n (d) an+1

Solution. Answer: (a). t1/2 = [1/((n−1)k)] × (2n−1 − 1)/an−1, so t1/2 ∝ 1/an−1.

Teacher's Note: Half-life of nth order varies as a1−n, i.e. inversely as an−1.

Exam Note: t1/2 ∝ a1−n.

Question 35. Which of the following expressions is correct for zero order and first order respectively [where a is initial concentration]?
(a) t1/2 ∝ a; t1/2 ∝ 1/a (b) t1/2 ∝ a; t1/2 ∝ a0 (c) t1/2 ∝ a0; t1/2 ∝ a (d) t1/2 ∝ a; t1/2 ∝ 1/a2

Solution. Answer: (b). t1/2 ∝ a1−n: zero order gives t1/2 ∝ a; first order gives t1/2 ∝ a0 (independent of a).

Teacher's Note: Use t1/2 ∝ a1−n with n = 0 and n = 1.

Exam Note: t1/2 ∝ a1−n.

Question 36. The unit of rate constant of zero order and first order chemical reactions are respectively:
(a) mol L−1 s−1, mol L−1 s−1 (b) s−1, mol L−1 s−1 (c) mol L−1 s−1, s−1 (d) None of these

Solution. Answer: (c). Zero order: k has the units of rate, mol L−1 s−1. First order: k has units s−1.

Teacher's Note: k units = rate units divided by concentrationn.

Exam Note: Zero order mol L−1 s−1; first order s−1.

Question 37. The units of rate of reaction and rate constant are same for a:
(a) zero order reaction (b) first order reaction (c) second order reaction (d) third order reaction

Solution. Answer: (a). Rate = k[A]0 = k for zero order, so k and the rate have the same units (mol L−1 s−1).

Teacher's Note: Zero order makes rate equal to k, so the units coincide.

Exam Note: Zero order: rate = k.

Question 38. CH3COOC2H5(aq) + H2O(l) →(H+(aq)) CH3COOH(aq) + C2H5OH(aq). What type of reaction is this?
(a) Unimolecular elementary (b) Pseudo first order (c) Zero order (d) Second order

Solution. Answer: (b). Water is present in large excess, so its concentration is effectively constant and the rate depends only on the ester concentration: a pseudo first order reaction.

Teacher's Note: A reactant in large excess is effectively constant, lowering the apparent order.

Exam Note: Excess water gives pseudo first order.

Question 39. When ethyl acetate was hydrolysed in presence of 0.1 M HCl, the rate constant was found to be 5.4 × 10−5 s−1. But in presence of 0.1 M H2SO4 the rate constant was found to be 6.25 × 10−5 s−1. Thus it may be concluded that:
(a) H2SO4 furnishes more H+ than HCl (b) H2SO4 furnishes less H+ than HCl (c) both have the same strength (d) will depend on concentration of ethyl acetate

Solution. Answer: (a). The rate constant for an acid-catalysed reaction increases with [H+]. The higher k with H2SO4 shows that 0.1 M H2SO4 supplies more H+ than 0.1 M HCl.

Teacher's Note: Catalysis by acid: greater k means greater H+ concentration.

Exam Note: Higher k means more H+ from the acid.

Question 40. For an elementary reaction 2A + B → A2B if the volume of vessel is quickly reduced to half of its original volume then rate of reaction will:
(a) unchange (b) increase four times (c) increase eight times (d) decrease eight times

Solution. Answer: (c). Rate = k[A]2[B]. Halving the volume doubles every concentration, so the rate becomes 22 × 2 = 8 times.

Teacher's Note: Halving volume doubles each concentration; total order is 3, so factor 23.

Exam Note: Volume halved means rate × 2order.

Question 41. In the following reaction A → B + C, rate constant is 0.001 M s−1. If we start with 1 M of A then conc. of A and B after 10 minutes are respectively:
(a) 0.5 M, 0.5 M (b) 0.6 M, 0.4 M (c) 0.4 M, 0.6 M (d) none of these

Solution. Answer: (c). The unit of k (M s−1) shows zero order. [A]t = [A]0 − kt = 1 − 0.001 × 600 = 0.4 M; [B] = 0.001 × 600 = 0.6 M.

Teacher's Note: Convert 10 min to 600 s; zero order loses k per second.

Exam Note: Zero order: [A] = [A]0 − kt, time in seconds.

Question 42. For a reaction A →(k = 0.6 M min−1) 2B, starting with 1 M of A only, concentration of B (in M) after 100 sec and 200 sec is respectively?
(a) 2 and 4 (b) 1 and 2 (c) 2 and 3 (d) None of these

Solution. Answer: (d). Zero order: A is completely used up at t = a/k = 1/0.6 min = 100 s. Since A → 2B, [B] = 2 M at 100 s and stays 2 M at 200 s (reaction is over). So the values 2 and 2 are not among options (a)-(c): none of these.

Teacher's Note: Zero order ends at a/k; after that nothing more forms.

Exam Note: Zero order stops at a/k; no further product.

Question 43. Half-life (t1/2) and completion time (T) of the above reaction (A → B + C, with k = 0.001 M s−1 and starting at 1 M, from Question 41) are:
(a) 500 min, 750 min (b) 500 sec, 750 sec (c) 500 sec, 1000 sec (d) None of these

Solution. Answer: (c). Zero order: t1/2 = a/2k = 1/(2 × 0.001) = 500 s; completion time T = a/k = 1000 s.

Teacher's Note: Zero order: half-life is a/2k and completion time is a/k.

Exam Note: t1/2 = a/2k, T = a/k.

Question 44. Match Column I with Column II.
Column IColumn II
P. Zero order reaction1. t1/2 ∝ 1/[A]0
Q. First order reaction2. t100% = [A]0/k
R. Second order reactions3. Involves at least two reactants
S. Pseudo unimolecular reaction4. [A] = [A]0e−kt
Code: (a) P-2, Q-1, R-4, S-2 (b) P-2, Q-4, R-1, S-3 (c) P-2, Q-1, R-3, S-4 (d) P-3, Q-2, R-1, S-4

Solution. Answer: (b). Zero order: t100% = [A]0/k (2). First order: [A] = [A]0e−kt (4). Second order: t1/2 ∝ 1/[A]0 (1). A pseudo unimolecular reaction is really bimolecular (one reactant in large excess), so it involves at least two reactants (3). Code: P-2, Q-4, R-1, S-3.

Teacher's Note: Match each order with its characteristic formula; pseudo order hides a second reactant.

Exam Note: Zero: a/k; first: exponential; second: 1/a.

Question 45. For the zero order reaction A → B + C; initial concentration of A is 0.1 M. If [A] = 0.08 M after 10 minutes, then its half-life and completion time are respectively:
(a) 10 min; 20 min (b) 2 × 10−3 min; 4 × 10−3 min (c) 25 min, 50 min (d) 250 min, 500 min

Solution. Answer: (c). x = 0.1 − 0.08 = 0.02 M in 10 min, so k = 0.02/10 = 2 × 10−3 M min−1. t1/2 = [A]0/2k = 0.1/(2 × 2 × 10−3) = 25 min; completion time = 2 × 25 = 50 min.

Teacher's Note: Get k from the amount reacted, then use a/2k and a/k.

Exam Note: k = x/t, then t1/2 = a/2k.

Question 46. For an elementary reaction, X(g) → Y(g) + Z(g), the half life period is 10 min. In what period of time would the concentration of X be reduced to 10% of original concentration?
(a) 20 Min. (b) 33 Min (c) 15 Min (d) 25 Min

Solution. Answer: (b). Elementary unimolecular means first order. k = 0.693/10 min−1. t = (2.303/k) log(100/10) = (2.303 × 10/0.693) × 1 = 33.2 min ≈ 33 min.

Teacher's Note: Unimolecular elementary means first order; use t = (2.303/k) log(a/(a − x)).

Exam Note: First order: t = 2.303 log(10)/k.

Question 47. In the presence of an acid, the initial concentration of cane sugar was reduced from 0.20 to 0.10 molar in 5 hours and from 0.2 to 0.05 molar in 10 hours. The reaction is of:
(a) Zero order (b) First order (c) Second order (d) Third order

Solution. Answer: (b). 0.20 to 0.10 M takes 5 h, which is one half-life; 0.20 to 0.05 M is two half-lives = 10 h. A constant half-life means first order.

Teacher's Note: Constant successive half-lives identify first order.

Exam Note: Equal half-lives mean first order.

Question 48. A first order reaction is 75% completed in 100 minutes. How long time will it take for its 87.5% completion?
(a) 125 min (b) 150 min (c) 175 min (d) 200 min

Solution. Answer: (b). 75% completion = 2 half-lives = 100 min, so t1/2 = 50 min. 87.5% completion = 3 half-lives = 150 min.

Teacher's Note: Count half-lives: 50%, 75%, 87.5% correspond to 1, 2, 3.

Exam Note: 75% is 2 half-lives; 87.5% is 3.

Question 49. The rate constant for a first order reaction whose half life is 480 sec:
(a) 1.44 × 10−3 sec−1 (b) 1.44 × sec−1 (c) 0.72 × 10−3 sec−3 (d) 2.88 × 10−3 sec−3

Solution. Answer: (a). k = 0.693/t1/2 = 0.693/480 = 1.44 × 10−3 s−1.

Teacher's Note: First order k = 0.693 divided by half-life.

Exam Note: k = 0.693/t1/2.

Question 50. Rate constant k = 2.303 min−1 for a particular reaction. The initial concentration of the reaction is 1 mol/litre then rate of reaction after 1 minute is:
(a) 2.303 M min−1 (b) 0.2303 M min−1 (c) 0.1 M min−1 (d) none of these

Solution. Answer: (b). The unit min−1 shows first order. k = (2.303/t) log(C0/C): 2.303 × 1 = 2.303 log(C0/C), so C0/C = 10 and C = 0.1 M. Rate = kC = 2.303 × 0.1 = 0.2303 M min−1.

Teacher's Note: Find the concentration left after 1 min, then multiply by k.

Exam Note: Rate = k × concentration at that time.

Question 51. For the reaction 3A(g) →(k) B(g) + C(g), k is 10−4 L/mol.min (the exponent as given in the book's solution). If [A] = 0.5 M then the value of −d[A]/dt (in Ms−1) is:
(a) 7.5 × 10−5 (b) 3 × 10−4 (c) 2.5 × 10−5 (d) none of these

Solution. Answer: (d). The unit L mol−1 min−1 shows second order, so rate of reaction = k[A]2 and −d[A]/dt = 3k[A]2 = 3 × 10−4 × 0.25 = 7.5 × 10−5 M min−1. Dividing by 60: 1.25 × 10−6 M s−1, which matches none of (a)-(c).

Teacher's Note: Convert min to s and remember the coefficient 3 in −d[A]/dt.

Exam Note: Convert min−1 to s−1; include factor 3.

Question 52. 99% of a first order reaction was completed in 32 minutes when 99.9% of the reaction will complete:
(a) 50 min (b) 46 min (c) 48 min (d) 49 min

Solution. Answer: (c). t = (2.303/k) log(100/(100 − x)). For 99%: 32 = (2.303/k) log 100 = (2.303/k) × 2, so 2.303/k = 16. For 99.9%: t = 16 × log 1000 = 16 × 3 = 48 min.

Teacher's Note: First order time scales with log of 100/(100 − %).

Exam Note: t ∝ log(100/remaining %).

Question 53. Which of the following represents the expression for (3/4)th life of first order reaction?
(a) (k/2.303) log(4/3) (b) (2.303/k) log(3/4) (c) (2.303/k) log 4 (d) (2.303/k) log 3

Solution. Answer: (c). When 3/4 has reacted, the fraction remaining is 1/4, so t3/4 = (2.303/k) log(a/(a/4)) = (2.303/k) log 4.

Teacher's Note: Three-fourth life means one-fourth remains, so a/(a − x) = 4.

Exam Note: t3/4 = (2.303/k) log 4.

Question 54. Consider the following first order competing reactions: X →(k1) A + B and Y →(k2) C + D. If 50% of the reaction of X was completed when 96% of the reaction of Y was completed, the ratio of their rate constants (k2/k1) is:
(a) 4.06 (b) 0.215 (c) 1.1 (d) 4.65

Solution. Answer: (d). Same time t. k1 = 0.693/t (50% done). k2 = (2.303/t) log(100/4) = 2.303 × 1.398/t = 3.219/t. Ratio k2/k1 = 3.219/0.693 = 4.65 (calculated 4.64).

Teacher's Note: Same elapsed time, so the ratio of k equals the ratio of ln(a/(a − x)).

Exam Note: k ratio = ratio of ln(a/(a − x)) values.

Question 55. For the reactions (i) A →(kI) P (ii) B →(kII) Q, the following observation is made. Graph for A: concentration falls from 2 M to 1 M at 30 min and to 0.5 M at 60 min (exponential decay). Graph for B: concentration falls linearly from 2 M to 1 M at 30 min. Calculate kI/kII, where kI and kII are rate constants for the respective reaction.
(a) 2.303 (b) 1 (c) 0.36 (d) 0.693

Solution. Answer: (d). A is first order with half-life 30 min: kI = 0.693/30 min−1. B is zero order: kII = (2 − 1)/30 = 1/30 M min−1. Ratio kI/kII = 0.693 (numerically, in M−1).

Teacher's Note: A is first order (constant half-life), B is zero order (linear fall).

Exam Note: Identify each order from the graph shape.

Question 56. The decomposition of N2O5 in chloroform was followed by measuring the volume of O2 gas evolved: 2N2O5 →(CCl4) 2N2O4(CCl4) + O2(g). The maximum volume of O2 gas obtained was 100 cm3. In 500 minutes, 90 cm3 of O2 were evolved. The first order rate constant (in min−1) for the disappearance of N2O5 is:
(a) 2.303/500 (b) (2.303/500) log(100/90) (c) (2.303/500) log(90/100) (d) 100/(10 × 500)

Solution. Answer: (a). k = (2.303/t) log(V∞/(V∞ − Vt)) = (2.303/500) log(100/(100 − 90)) = (2.303/500) log 10 = 2.303/500 min−1.

Teacher's Note: Volume evolved measures progress: remaining is V∞ − Vt.

Exam Note: Use V∞ − Vt as the remaining quantity.

Question 57. For a homogeneous gaseous reaction A → 3B, if pressure after time t was PT and after completion of reaction, pressure was P∞ then select correct relation:
(a) k = (1/t) ln(P∞/(3(P∞ − Pt))) (b) k = (1/t) ln(2P∞/(3(P∞ − PT))) (c) k = (1/t) ln(3P∞/(2P∞ − Pt)) (d) k = (1/t) ln(2P∞/(3(P∞ − PT)))

Solution. Answer: (d), as printed in the book key. Let P0 be the initial pressure: PT = P0 + 2x and P∞ = 3P0. Then x = (PT − P0)/2 and P0 − x = (P∞ − PT)/2, so k = (1/t) ln(P0/(P0 − x)) = (1/t) ln(2P∞/(3(P∞ − PT))). Options (b) and (d) are printed identically in the book.

Teacher's Note: Express P0 and x through P∞ and PT using A → 3B.

Exam Note: P∞ = 3P0, PT = P0 + 2x.

Question 58. The half-life of first order decomposition of NH4NO3 is 2.10 hr at 288 K temperature: NH4NO3(aq) → N2O(g) + 2H2O(l). If 6.2 g of NH4NO3 is allowed to decompose, the time required for NH4NO3 to decompose 90% and the volume of dry N2O produced at this point measured at STP are respectively:
(a) 6.978 hr, 2.016 L (b) 0.319 hr, 2.12 L (c) 0.319 hr, 2.016 L (d) None of these

Solution. Corrected: (d). k = 0.693/2.10 = 0.33 hr−1; t = (2.303/0.33) log(100/10) = 6.978 hr, which agrees with the book. But the book's volume uses the molar mass of NH4NO3 as 62; the correct molar mass is 80 g/mol. Moles = 6.2/80 = 0.0775; N2O formed (90%) = 0.06975 mol; volume = 0.06975 × 22.4 = 1.56 L, not 2.016 L. So option (a) is wrong and the correct choice is (d) None of these. (Printed key: (a).)

Teacher's Note: Check molar mass of NH4NO3 (80) before computing moles and gas volume.

Exam Note: Always recompute molar mass; do not copy it.

Question 59. For a first order homogeneous gaseous reaction, A → 2B + C, then initial pressure was Pi while total pressure after time t was Pt. The right expression for the rate constants k in terms of Pi, Pt and t is:
(a) k = (2.303/t) log(2Pi/(3Pi − Pt)) (b) k = (2.303/t) log(2Pi/(2Pt − Pi)) (c) k = (2.303/t) log(Pi/(Pi − Pt)) (d) none of these

Solution. Answer: (a). Pt = Pi + 2x, so x = (Pt − Pi)/2 and Pi − x = (3Pi − Pt)/2. k = (2.303/t) log(Pi/(Pi − x)) = (2.303/t) log(2Pi/(3Pi − Pt)).

Teacher's Note: One mole becomes three, so total pressure rises by 2x.

Exam Note: Pt = Pi + 2x.

Question 60. The decomposition of azo methane, at certain temperature according to the equation (CH3)2N2 → C2H6 + N2 is a first order reaction. After 40 minutes from the start, the total pressure developed is found to be 350 mm Hg in place of initial pressure 200 mm Hg of azo methane. The value of rate constant k is:
(a) 2.88 × 10−4 sec−1 (b) 1.25 × 10−4 sec−1 (c) 5.77 × 10−4 sec−1 (d) None of these

Solution. Answer: (c). Total pressure = 200 + x = 350, so x = 150 mm. k = (2.303/t) log(Pi/(Pi − x)) = (2.303/2400 s) log(200/50) = 5.77 × 10−4 s−1.

Teacher's Note: Moles double, so total pressure = Pi + x; convert 40 min to seconds.

Exam Note: Total P = Pi + x; use seconds.

Question 61. The hydrolysis of sucrose was studied with the help of polarimeter and following data were collected: time (min): 0, 70, ∞; observed rotation (degrees): 44, 16.5, −11. When the reaction mixture will be optically inactive? (Given: ln 2 = 0.7, ln 3 = 1.1, ln 5 = 1.6)
(a) 16 min. (b) 69.47 min. (c) 160 min. (d) none of these

Solution. Answer: (c). k = (1/t) ln((r0 − r∞)/(rt − r∞)) = (1/70) ln(55/27.5) = ln 2/70. Optically inactive means rt = 0: ln(55/11) = ln 5 = kt, so t = 1.6 × 70/0.7 = 160 min.

Teacher's Note: Rotation difference from the final value tracks the unreacted sucrose.

Exam Note: Use rt − r∞ as the remaining quantity.

Question 62. For a particular reaction with initial conc. of the reactants as a1 and a2, the half-life period are t1 and t2 respectively. The order of the reaction (n) is given by:
(a) n = 1 + log(t2/t1)/log(a2/a1) (b) n = log(t1/t2)/log(a2/a1) (c) n = 1 + log(t1/t2)/log(a2/a1) (d) none of these

Solution. Answer: (c). t1/2 ∝ a1−n, so t2/t1 = (a2/a1)1−n. Taking logs: 1 − n = log(t2/t1)/log(a2/a1), so n = 1 + log(t1/t2)/log(a2/a1).

Teacher's Note: Take logs of t2/t1 = (a2/a1)1−n.

Exam Note: Half-life method for order.

Question 63. The value of t0.875/t0.50 for nth order reaction is:
(a) 2(2n−2) (b) 2(2n−2)−1 (c) (8n−1 − 1)/(2n−1 − 1) (d) None of these

Solution. Answer: (c). kt = [1/(n−1)][1/Atn−1 − 1/A0n−1]. For 50%: kt0.5 = [1/((n−1)A0n−1)](2n−1 − 1). For 87.5%, At = A0/8: kt0.875 = [1/((n−1)A0n−1)](8n−1 − 1). Dividing gives (8n−1 − 1)/(2n−1 − 1). Check n = 1 limit: 3.

Teacher's Note: Substitute A0/2 and A0/8 into the nth-order integrated law and divide.

Exam Note: Use nth-order integrated rate law twice.

Question 64. A → B first order reaction. A is optical active and B is optically inactive, a series of experiments were conducted on a solution of A: time 0, 60 min, ∞; optical rotation 82°, 77°, 2°. Assume some impurity present, calculate the optical rotation after 5 hours. (Given ln 1.066 = 0.064, e0.16 = 1.17)
(a) 60 (b) 30 (c) 20 (d) 120

Solution. Answer: (a). The impurity gives 2° at t = ∞, so use (r − 2). k = (1/60) ln(80/75). At 5 h = 300 min: ln(80/(rt − 2)) = 5 ln(80/75) = 5 × 0.064 = 0.32, so 80/(rt − 2) = e0.32 = (1.17)2 = 1.37, rt − 2 ≈ 58, rt ≈ 60° (exact calculation gives 59.9°).

Teacher's Note: Subtract the residual 2° from all readings before applying first order law.

Exam Note: Subtract the final reading from all rotations.

Question 65. At 300 K the half-life of a sample of a gaseous compound initially at 1 atm is 100 sec. When the pressure is 0.5 atm the half-life is 50 sec. The order of reaction is:
(a) 0 (b) 1 (c) 2 (d) 3

Solution. Answer: (a). Half-life halves when the initial pressure halves, so t1/2 ∝ a. This is zero order.

Teacher's Note: Half-life proportional to initial concentration means zero order.

Exam Note: t1/2 ∝ a gives order 0.

Question 66. A decomposes as A(g) →(k1 = 2 × 10−3 s−1) 2B(g) and A(g) →(k2 = 1 × 10−3 s−1) C(g) (parallel reactions). The rate of appearance of B, taking 2 M concentration of A, is equal to:
(a) 2 × 10−3 M s−1 (b) 4 × 10−3 M s−1 (c) 8 × 10−3 M s−1 (d) None of these

Solution. Answer: (c). Rate of reaction for the first path = (1/2) d[B]/dt = k1[A], so d[B]/dt = 2k1[A] = 2 × 2 × 10−3 × 2 = 8 × 10−3 M s−1.

Teacher's Note: Rate of appearance of B is twice the path rate because A gives 2B.

Exam Note: d[B]/dt = 2k1[A].

Question 67. For an endothermic reaction where ΔH represents the enthalpy of reaction in kJ/mol, the minimum value for the energy of activation will be:
(a) less than ΔH (b) more than ΔH (c) equal to ΔH (d) zero

Solution. Answer: (b). For an endothermic reaction the products lie ΔH above the reactants, and the activated complex lies higher still. So Ea is always greater than ΔH.

Teacher's Note: Activation energy must climb past the product level, so it exceeds ΔH.

Exam Note: Endothermic: Ea > ΔH always.

Question 68. The activation energy of the reaction, A + B → C + D + 38 kcal is 20 kcal. What would be the activation energy of the reaction, C + D → A + B?
(a) 20 kcal (b) −20 kcal (c) 18 kcal (d) 58 kcal

Solution. Answer: (d). The forward reaction releases 38 kcal (exothermic). Ea(reverse) = Ea(forward) + |ΔH| = 20 + 38 = 58 kcal.

Teacher's Note: Reverse barrier = forward barrier plus the energy released in the forward step.

Exam Note: Eb = Ef + heat released.

Question 69. When the activation energies of the forward and backward reactions are equal, then:
(a) ΔE = 0, ΔS = 0 (b) ΔE = 0; ΔG = 0 (c) ΔS = 0; ΔG = 0 (d) only ΔE = 0

Solution. Answer: (d). ΔE ≈ ΔH = Ef − Eb = 0 when the two activation energies are equal. Nothing is implied about ΔS or ΔG, so only ΔE = 0.

Teacher's Note: ΔH = Ef − Eb; entropy and free energy are not fixed by it.

Exam Note: Ef = Eb implies ΔE = 0 only.

Question 70. For an exothermic chemical process occurring in two steps as follows: (i) A + B → X (slow); (ii) X → AB (fast). The process of reaction can be best described by the potential energy diagram: Options: (a) a single high barrier through X with a shallow second hump and AB at nearly the same level as A + B; (b) one single hump with AB below A + B; (c) a high first barrier to intermediate X in a shallow well, then a lower second barrier, with AB well below A + B; (d) a low first barrier, intermediate X in a deep well, then a high second barrier, AB below A + B.

Solution. Answer: (c). The slow step has the higher activation energy, so the first barrier is the higher one. The fast step has a lower barrier, and since the overall process is exothermic the product AB lies below A + B. The intermediate X sits in a shallow well between the two peaks.

Teacher's Note: Slow step means higher first barrier; exothermic means products lower than reactants.

Exam Note: First peak higher; products lower.

Question 71. Select the correct diagram for an endothermic reaction that proceeds through two steps, with the second step is rate determining. Options are four potential energy profiles with two humps each: (a) first hump higher than second, products below reactants; (b) first hump higher, products slightly above reactants; (c) two equal humps, products above reactants; (d) first hump lower, second hump higher, products above reactants.

Solution. Answer: (d). The rate determining (slow) step has the higher activation energy, so the second hump must be higher than the first. An endothermic reaction has products at a higher energy than reactants. Only (d) shows both.

Teacher's Note: Rate determining step has the highest barrier; endothermic means product level above reactants.

Exam Note: Slow step = tallest peak.

Question 72. If k35°/k34° > 1, this means that:
(a) Rate increases with the rise in temperature (b) Rate decreases with rise in temperature (c) rate does not change with rise in temperature (d) None of the above

Solution. Answer: (a). The ratio of rate constants at the higher temperature (35°) to the lower (34°) exceeds 1, so k and the rate increase when temperature rises.

Teacher's Note: Compare k at the higher temperature with k at the lower one.

Exam Note: Ratio > 1 means rate increases with T.

Question 73. The plot of ln k versus 1/T is linear with slope of:
(a) −Ea/R (b) Ea/R (c) Ea/2.303R (d) −Ea/2.303R

Solution. Answer: (a). From k = Ae−Ea/RT, ln k = ln A − (Ea/R)(1/T), so the slope of ln k against 1/T is −Ea/R. (The log10 plot would give −Ea/2.303R.)

Teacher's Note: Take natural log of the Arrhenius equation; slope is −Ea/R.

Exam Note: ln k plot: −Ea/R; log k plot: −Ea/2.303R.

Question 74. Rate constant for a chemical reaction takes place at 500 K is expressed as k = A·e−1000. The activation energy of the reaction is:
(a) 100 cal/mol (b) 1000 kcal/mol (c) 104 kcal/mol (d) 106 kcal/mol

Solution. Answer: (b). Ea/RT = 1000, so Ea = 1000 × R × T = 1000 × (2 cal K−1 mol−1) × 500 K = 106 cal/mol = 1000 kcal/mol. (Using R = 1.987 gives 994 kcal/mol, about 1000.)

Teacher's Note: Set Ea/RT equal to the exponent and convert cal to kcal.

Exam Note: Ea = exponent × RT.

Question 75. For a complex reaction A →(k) products, Ea1 = 180 kJ/mol; Ea2 = 80 kJ/mol; Ea3 = 50 kJ/mol. Overall rate constant k is related to individual rate constant by the equation k = (k1·k2/k3)2/3. Activation energy (kJ/mol) for the overall reaction is:
(a) 100 (b) 43.44 (c) 150 (d) 140

Solution. Answer: (d). Taking logs, ln k = (2/3)(ln k1 + ln k2 − ln k3), and each ln k contributes −E/RT. So E = (2/3)(Ea1 + Ea2 − Ea3) = (2/3)(180 + 80 − 50) = 140 kJ/mol.

Teacher's Note: Combine activation energies in the same way the rate constants combine.

Exam Note: E = (2/3)(E1 + E2 − E3).

Question 76. For reaction A → B, the rate constant k1 = A1e−Ea1/RT and for the reaction X → Y, the rate constant k2 = A2e−Ea2/RT. If A1 = 109, A2 = 1010 and Ea1 = 1200 cal/mol, then the temperature at which k1 = k2 is: (Given R = 2 cal/K-mol) [The statement as printed gives only Ea1; the printed solution uses Ea2 − Ea1 = 600 cal/mol, i.e. Ea2 = 1800 cal/mol.]
(a) 300 K (b) 300 × 2.303 K (c) (300/2.303) K (d) None of these

Solution. Answer: (c). k1 = k2 gives A2/A1 = e(Ea2 − Ea1)/RT, so 10 = exp(600/(2T)) = exp(300/T). Then ln 10 = 300/T and T = 300/2.303 K ≈ 130 K. (Uses Ea2 − Ea1 = 600 cal/mol from the printed solution.)

Teacher's Note: Equate the two Arrhenius expressions and solve for T.

Exam Note: Set k1 = k2; take logs.

Question 77. The activation energies of the forward and backward reactions in the case of a chemical reaction are 30.5 and 45.4 kJ/mol respectively. The reaction is:
(a) Exothermic (b) Endothermic (c) Neither exothermic nor endothermic (d) Independent of temperature

Solution. Answer: (a). ΔH = Ef − Eb = 30.5 − 45.4 = −14.9 kJ/mol. A negative ΔH means the reaction is exothermic.

Teacher's Note: ΔH = Eforward − Ebackward; negative means exothermic.

Exam Note: ΔH = Ef − Eb.

Question 78. A reaction rate constant is given by: k = 1.2 × 1014 e−25000/RT sec−1. It means:
(a) log k versus log T will give a straight line with a slope as 25000 (b) log k versus log T will give a straight line with a slope as −25000 (c) log k versus T will give a straight line with a slope as −25000 (d) log k versus 1/T will give a straight line

Solution. Answer: (d). ln k = ln(1.2 × 1014) − 25000/(RT), so log k is linear in 1/T (slope −25000/(2.303R)). The other plots are not linear.

Teacher's Note: Arrhenius form makes log k linear in 1/T only.

Exam Note: Only log k against 1/T is linear.

Question 79. The temperature coefficient of a reaction is:
(a) The rate constant (b) The rate constant at a fixed temperature (c) The ratio of rate constant at two temperature (d) The ratio of rate constant differing by 10°C preferably k308/k298

Solution. Answer: (d). Temperature coefficient µ = kT+10/kT, the ratio of rate constants differing by 10°C, for example k308/k298.

Teacher's Note: Definition: ratio of k at T + 10 to k at T.

Exam Note: µ = kT+10/kT.

Question 80. Which graph shows zero activation energy? Options (graphs of energy E against reaction progress): (a) a curve rising smoothly from reactants to a higher product level; (b) a straight line falling from reactants to a lower product level; (c) a smooth S-shaped curve falling from the reactant level to a lower product level with no hump; (d) a curve falling steeply and then flattening out at a lower level.

Solution. Answer (from key): (c). Zero activation energy means there is no energy barrier: the energy profile has no hump and descends smoothly from reactants to products. (The printed key chooses (c); the book does not give further working.)

Teacher's Note: Zero barrier means no peak in the profile between reactants and products.

Exam Note: No peak in the energy profile.

Question 81. A homogeneous catalytic reaction takes place through the three alternative plots A, B and C shown in the given figure (energy against reaction course; the same reactants and products, with curve A having the highest barrier, curve B a lower one and curve C the lowest). Which one of the following indicates the relative ease with which the reaction can take place?
(a) A > B > C (b) C > B > A (c) A > C > B (d) A = B = C

Solution. Answer: (b). The lower the activation energy barrier, the easier and faster the reaction. Curve C has the lowest barrier and A the highest, so the ease order is C > B > A.

Teacher's Note: Lower barrier means faster reaction; rank by barrier height.

Exam Note: Lowest barrier = easiest path.

Question 82. A first order reaction is 50% completed in 20 minutes at 27°C and in 5 minutes at 47°C. The energy of activation of the reaction is:
(a) 43.85 kJ/mol (b) 55.14 kJ/mol (c) 11.97 kJ/mol (d) 6.65 kJ/mol

Solution. Answer: (b). t1/2 falls from 20 to 5 min, so k2/k1 = 4. Ea = [2.303RT1T2/(T2 − T1)] log(k2/k1) = 2.303 × 8.314 × 300 × 320/20 × 0.602 ≈ 55.3 kJ/mol. This is closest to option (b) 55.14 (small difference from rounding).

Teacher's Note: Half-lives give the ratio of rate constants directly (k ∝ 1/t1/2).

Exam Note: k2/k1 = t1/t2 = 4.

Question 83. The rate of a reaction gets double when temp changes from 7°C to 17°C. By what factor will it change for the temp range 17°C to 27°C?
(a) 1.81 (b) 1.71 (c) 1.91 (d) 1.76

Solution. Answer: (c). From 280 K to 290 K the rate doubles: ln 2 = (Ea/R)(1/280 − 1/290), so Ea/R = 5629 K. From 290 K to 300 K: ln(k300/k290) = 5629 × (1/290 − 1/300) = 0.647, so the factor = e0.647 = 1.91.

Teacher's Note: Not simply doubling again: the Arrhenius factor shrinks at higher temperature.

Exam Note: Use Arrhenius, not a fixed doubling.

Question 84. Which of the following explains the increase of the reaction rate by catalyst:
(a) Catalyst decreases the rate of backward reaction so that the rate of forward reaction increases (b) Catalyst provides extra energy to reacting molecules so that they may reduce effective collisions (c) Catalyst provides an alternative path of lower activation energy to the reactants (d) Catalyst increases the number of collisions between the reacting molecules.

Solution. Answer: (c). A catalyst provides an alternative reaction path with a lower activation energy, so more molecules cross the barrier at the same temperature.

Teacher's Note: Catalyst lowers Ea through a new path; it does not add energy.

Exam Note: Catalyst: alternative path, lower Ea.

Question 85. Collision theory is satisfactory for:
(a) First order reactions (b) Zero order reactions (c) Bimolecular reactions (d) Any order reactions

Solution. Answer: (c). Collision theory deals with collisions between two molecules, so it explains bimolecular reactions satisfactorily.

Teacher's Note: Collision theory counts two-body collisions, hence bimolecular steps.

Exam Note: Collision theory: bimolecular reactions.

Question 86. For the first order reaction A → B + C, carried out at 27°C if 3.8 × 10−16% of the reactant molecules exists in the activated state, the Ea (activation energy) of the reaction is:
(a) 12 kJ/mole (b) 831.4 kJ/mole (c) 100 kJ/mole (d) 88.57 kJ/mole

Solution. Answer: (c). Fraction in activated state = e−Ea/RT = 3.8 × 10−18. Ea = RT ln(1/3.8 × 10−18) = 8.314 × 300 × 40.11 = 1.00 × 105 J/mol = 100 kJ/mol.

Teacher's Note: Convert the percentage to a fraction before taking the log.

Exam Note: Fraction = e−Ea/RT; 3.8 × 10−16% = 3.8 × 10−18.

Question 87. A catalyst lowers the activation energy for a certain reaction from 83.314 to 75 kJ mol−1 at 500 K. What will be the rate of reaction as compare to uncatalysed reaction? Assume other things being equal.
(a) Double (b) 28 times (c) 7.38 times (d) 7.38 × 103 times

Solution. Answer: (c). kcat/kuncat = exp(ΔEa/RT) = exp(8314/(8.314 × 500)) = e2 = 7.38.

Teacher's Note: Ratio of rate constants is exp(ΔEa/RT) when A is unchanged.

Exam Note: Ratio = exp(ΔEa/RT).

Question 88. A following mechanism has been proposed for a reaction 2A + B → D + E: A + B → C + D (slow); A + C → E (fast). The rate law expression for the reaction is:
(a) r = k[A]2[B] (b) r = k[A][B] (c) r = k[A]2 (d) r = k[A][C]

Solution. Corrected: (b). The rate law is set by the slow step: A + B → C + D, an elementary step, so r = k[A][B]. (Printed key: (c), which does not follow from the slow step.)

Teacher's Note: Rate law comes from the slow step only; intermediates do not appear.

Exam Note: Rate law = slow step.

Question 89. A hypothetical reaction A2 + B2 → 2AB follows the mechanism as given below: A2 ⇌ A + A (fast); A + B2 → AB + B (slow); A + B → AB (fast). The order of the over all reaction is:
(a) 2 (b) 1 (c) 3/2 (d) 0

Solution. Corrected: (c). Slow step: r = k[A][B2]. From the fast equilibrium K = [A]2/[A2], so [A] = K1/2[A2]1/2. Hence r = kK1/2[A2]1/2[B2], order = 1/2 + 1 = 3/2. (Printed key: (b).)

Teacher's Note: Replace the intermediate A using the fast pre-equilibrium constant.

Exam Note: Eliminate intermediates via the fast equilibrium.

Question 90. Chemical reaction occurs as a result of collisions between reacting molecules. Therefore, the reaction rate is given by:
(a) Total number of collisions occurring in a unit volume per second (b) Fraction of molecules which possess energy less than the threshold energy (c) Total number of effective collisions which have enough activation energy (d) none of the above

Solution. Answer: (c). Only effective collisions, those with energy at least the activation (threshold) energy and the proper orientation, lead to reaction, so the rate equals the number of effective collisions.

Teacher's Note: Not all collisions react; only those with enough energy and orientation.

Exam Note: Rate = number of effective collisions.

Question 91. Radioactivity is affected by:
(a) temperature (b) pressure (c) electric and magnetic field (d) none of these

Solution. Answer: (d). Radioactivity is a nuclear property and is unaffected by temperature, pressure, or electric and magnetic fields (fields only deflect the emitted rays).

Teacher's Note: Nuclear decay is independent of external physical and chemical conditions.

Exam Note: Radioactive decay is not affected by T or P.

Question 92. The radiation from naturally occurring radioactive substance as seen after deflection by a magnetic field in one direction are:
(a) α-rays (b) β-rays (c) both α and β rays (d) either α or β-rays

Solution. Answer: (d). α-particles (positive) and β-particles (negative) are deflected in opposite directions. So in any one direction only α or only β rays are seen (γ-rays are undeflected).

Teacher's Note: Opposite charges are deflected in opposite directions.

Exam Note: Charged α and β bend opposite ways.

Question 93. In the radioactive decay zXA → z+1YA → z−1ZA−4 → z−1ZA−4 (high energy then low energy), the sequence of the radiation emitted is:
(a) α, β, γ (b) γ, α, β (c) β, γ, α (d) β, α, γ

Solution. Answer: (d). X to Y: atomic number up by 1, mass unchanged, so β-emission. Y to Z: atomic number down by 2 and mass down by 4, so α-emission. Z (high energy) to Z (low energy): γ-emission. Sequence β, α, γ.

Teacher's Note: Track Z and A after each step to identify the particle.

Exam Note: β: Z+1; α: Z−2, A−4; γ: no change.

Question 94. A radioactive nuclide emitts γ-rays due to the:
(a) emission of an electron from its orbital (b) nuclear energy transition from a higher state to a lower state (c) presence of less neutrons than protons (d) presence of more neutrons than protons

Solution. Answer: (b). γ-rays are emitted when an excited nucleus drops from a higher nuclear energy state to a lower one.

Teacher's Note: γ-emission is a nuclear de-excitation, like a photon from an excited atom.

Exam Note: γ-rays: nuclear transition to lower energy.

Question 95. Consider the following decay zXA → z+1YA + −1e0, X is unstable because:
(a) its nucleus has excess energy (b) n/p ratio is high (c) n/p ratio is low (d) none of these

Solution. Answer: (b). β− emission converts a neutron to a proton (n → p + e−), which lowers the n/p ratio. So X, with too many neutrons, has a high n/p ratio.

Teacher's Note: β⁻ emitters have excess neutrons; the decay lowers n/p.

Exam Note: β⁻ decay means n/p too high.

Question 96. Consider the following decay zXA → z−1YA + +1e0 (β+), X is unstable because:
(a) it's nucleus has excess energy (b) n/p ratio is high (c) n/p ratio is low (d) none of these

Solution. Answer: (c). Positron emission converts a proton to a neutron (p → n + e+), raising the n/p ratio. So X has too few neutrons, a low n/p ratio.

Teacher's Note: β⁺ emitters have too few neutrons; the decay raises n/p.

Exam Note: β⁺ decay means n/p too low.

Question 97. During α-decay:
(a) n/p ratio decreases (b) n/p ratio increases (c) n/p remains constant (d) may increase or decrease

Solution. Answer: (b). α-emission removes 2 protons and 2 neutrons. Since the nuclides that decay by α-emission have n/p > 1, removing equal numbers of n and p raises n/p. (Printed key: (b).)

Teacher's Note: Removing equal numbers of n and p raises the ratio when n > p.

Exam Note: Heavy nuclei have n > p, so α raises n/p.

Question 98. Which of the following processes causes the emission of X-ray?
(a) α-emission (b) β-emission (c) β+ (Positron emission) (d) electron capture

Solution. Answer: (d). In electron capture the nucleus captures an inner (K-shell) electron, leaving a vacancy. Electrons from higher shells fall in and X-rays are emitted.

Teacher's Note: K-shell vacancy after electron capture is filled with X-ray emission.

Exam Note: Electron capture produces K-shell vacancy: X-rays.

Question 99. Which of the following processes result in an increase in the atomic number of a nuclide?
(a) α-emission (b) electron capture (c) γ-emission (d) β-(Beta)emission

Solution. Answer: (d). β− emission converts n → p, raising Z by 1. α-emission lowers Z by 2, electron capture lowers Z by 1, γ-emission leaves Z unchanged.

Teacher's Note: Compare the change in Z for each mode of decay.

Exam Note: β⁻: Z up by 1.

Question 100. ........ is produced when a positron and an electron collide.
(a) X-ray (b) Neutron (c) γ-radiation (d) Neutrino

Solution. Answer: (c). A positron and an electron annihilate each other, converting their mass into energy as γ-radiation (two 0.51 MeV photons).

Teacher's Note: Matter-antimatter annihilation releases γ-photons.

Exam Note: Electron + positron gives γ-radiation.

Question 101. 67Ho165 is stable isotope. 67Ho150 is expected to disintegrated by:
(a) α-emission (b) β-emission (c) positron emission (d) γ-emission

Solution. Answer: (c). Ho-150 has far fewer neutrons than the stable Ho-165 (83 vs 98), so its n/p ratio is too low. It disintegrates by positron emission (or electron capture), which raises n/p.

Teacher's Note: Neutron-deficient nuclei raise n/p by positron emission.

Exam Note: Low n/p: positron emission.

Question 102. 1H1 is a stable isotope. 1H3 is expected to disintegrate by:
(a) α-emission (b) β-emission (c) positron emission (d) proton emission

Solution. Answer: (b). Tritium has 2 neutrons for 1 proton, so n/p is too high. It decays by β− emission (n → p), forming 2He3.

Teacher's Note: Neutron-rich nuclei lower n/p by β⁻ emission.

Exam Note: High n/p: β⁻ emission.

Question 103. Loss in β-particle is equivalent to:
(a) increase of one proton only (b) decrease of one neutron only (c) both (a) and (b) (d) none of these

Solution. Corrected: (c). Emission of a β-particle converts a neutron into a proton (0n1 → 1p1 + −1e0), so the nucleus gains one proton and loses one neutron: both (a) and (b). (Printed key: (b).)

Teacher's Note: β emission changes both counts: one neutron becomes one proton.

Exam Note: β⁻: n decreases by 1 and p increases by 1.

Question 104. Atoms 7XA, 8YB and 9Z17 are such that 8Y is an isobar of 7X and atom 9Z17 is isotone of 8Y. Mass no. of X and no. of neutrons in Y are respectively:
(a) 8, 8 (b) 17, 7 (c) 9, 8 (d) 16, 8

Solution. Answer: (d). Isotones have equal neutrons: Z has 17 − 9 = 8 neutrons, so Y has B − 8 = 8, giving B = 16. Isobars have equal mass number, so A = B = 16. Mass number of X = 16 and neutrons in Y = 8.

Teacher's Note: Isotones share neutron number; isobars share mass number.

Exam Note: Isotone: equal n. Isobar: equal A.

Question 105. 90Th234 disintegrate to give 82Pb206 as the final product. Total no. of α and β particles emitted out during this process are:
(a) 6 (b) 7 (c) 8 (d) 13

Solution. Answer: (d). Mass decrease = 234 − 206 = 28, so 28/4 = 7 α-particles, which lower Z by 14 to 76. Final Z = 82, so 82 − 76 = 6 β-particles. Total = 7 + 6 = 13.

Teacher's Note: Get α from mass change, then β from the leftover charge change.

Exam Note: α count = ΔA/4; β from ΔZ balance.

Question 106. An isotope of 32Ge76 is:
(a) 32Ge77 (b) 33As77 (c) 34Se77 (d) 36Kr77

Solution. Corrected: (a). Isotopes have the same atomic number but different mass numbers. Only 32Ge77 has Z = 32. (Printed key: (b), but As has Z = 33 and so is not an isotope of Ge.)

Teacher's Note: Isotopes: same Z, different A.

Exam Note: Same Z means isotope.

Question 107. Pair of isobar is:
(a) 6C13, 7N13 (b) 6C13, 7N14 (c) 6C14; 8N15 (d) none of these

Solution. Answer: (a). Isobars have the same mass number but different atomic numbers: 6C13 and 7N13 both have A = 13.

Teacher's Note: Isobars share mass number A.

Exam Note: Isobars: same A, different Z.

Question 108. Isodiaphers are atoms having:
(a) n/p constant (b) p/n constant (c) (n − p) constant (d) (n − p) different

Solution. Answer: (c). Isodiaphers are nuclides with the same neutron excess, i.e. the same value of (n − p).

Teacher's Note: Isodiaphers share the neutron excess n − p.

Exam Note: Isodiaphers: equal n − p.

Question 109. The 'Group displacement law' was given by:
(a) Bacquerel (b) Rutherford (c) Madam Curie (d) Soddy and Fajan

Solution. Answer: (d). The group displacement law (how α- and β-emission shift an element in the periodic table) was given by Soddy and Fajans.

Teacher's Note: Soddy and Fajans formulated the displacement law.

Exam Note: Group displacement law: Soddy and Fajans.

Question 110. 3Li7 + 1p1 → X; Identify X if reaction is (p, α) type.
(a) 4Be8 (b) 2He4 (c) 0γ0 (d) none of these

Solution. Answer: (b). A (p, α) reaction emits an α-particle: 3Li7 + 1H1 → 2He4 + 2He4. Balancing mass (7 + 1 = 8 = 4 + 4) and charge (3 + 1 = 4 = 2 + 2) gives X = 2He4.

Teacher's Note: Balance A and Z after writing the emitted particle named in the (p, α) notation.

Exam Note: (p, α): α is emitted; balance A and Z.

Question 111. Identify reaction type: 13Al27 + 1H2 → 13Al28 + 1H1
(a) (d, p) (b) (p, p) (c) (p, d) (d) none of these

Solution. Answer: (a). Deuteron (d = 1H2) is the projectile and a proton (p = 1H1) is emitted, so the reaction is (d, p).

Teacher's Note: Notation (projectile, emitted particle): deuteron in, proton out.

Exam Note: (in, out) notation: (d, p).

Question 112. 13Al27 + 1p1 → X + 0γ0; Identify X if reaction is (p, γ) type artificial radioactive reaction.
(a) 13Al28 (b) 14Si27 (c) 14Si28 (d) none of these

Solution. Answer: (c). Balance mass: 27 + 1 = 28 (γ has no mass). Balance charge: 13 + 1 = 14. So X = 14Si28.

Teacher's Note: γ carries no mass or charge, so X has A = 28 and Z = 14.

Exam Note: Balance A and Z; γ is neutral.

Question 113. The number of neutrons accompanying the formation of 54X139 and 38Sr94 (printed in the book as Sr194, a misprint) from the absorption of slow neutron by 92U235 followed by nuclear fission is:
(a) 0 (b) 1 (c) 2 (d) 3

Solution. Answer: (d). 92U235 + 0n1 → 54X139 + 38Sr94 + 3 0n1. Mass: 235 + 1 = 236 = 139 + 94 + 3; charge: 92 = 54 + 38. So 3 neutrons are released.

Teacher's Note: Balance mass number on both sides; charge already balances.

Exam Note: Mass balance gives the neutron count.

Question 114. What will be the product of reaction 101Md255 (α, 2n)?
(a) 103Lr256 (b) 102No257 (c) 103Lr257 (d) 82Pb205

Solution. Answer: (c). Md-255 absorbs an α-particle (Z + 2, A + 4) and emits 2 neutrons (A − 2): Z = 103, A = 255 + 4 − 2 = 257, giving 103Lr257.

Teacher's Note: (α, 2n): add 4 to A and 2 to Z, subtract 2 from A.

Exam Note: (α, 2n): Z + 2, A + 2.

Question 115. Complete the following nuclear equation by supplying the symbol for the other product of the fission: 92U235 + 0n1 → 38Sr94 + ........ + 2 0n1
(a) 54Xe139 (b) 54Xe140 (c) 64Gd104 (d) none of these

Solution. Answer: (b). Mass: 235 + 1 = 236 = 94 + A + 2, so A = 140. Charge: 92 = 38 + Z, so Z = 54. The product is 54Xe140.

Teacher's Note: Two neutrons are released, so the fragment mass is 236 − 94 − 2 = 140.

Exam Note: Balance A and Z; count the 2 neutrons.

Question 116. 92U235 + 0n1 → 56Ba139 + 36Kr94 + 3 0n1 + 200 MeV. Total energy released (in MeV) after 5th stage of fission is:
(a) 48600 (b) 16200 (c) 24200 (d) None of these

Solution. Answer: (c). Each fission produces 3 neutrons, so the number of fissions in successive stages is 1, 3, 32, 33, 34. Total after the 5th stage = 1 + 3 + 9 + 27 + 81 = 121 = (35 − 1)/(3 − 1). Energy = 200 × 121 = 24200 MeV.

Teacher's Note: Fissions form a geometric series with ratio 3 (each fission yields 3 neutrons).

Exam Note: Sum the geometric series, then multiply by 200 MeV.

Question 117. Proton bombardment of Th230 followed by emission of two alpha particles produce:
(a) Rn232 (b) Ra233 (c) Fr223 (d) Fr222

Solution. Answer: (c). Th230 (Z = 90) + p gives Pa231 (Z = 91). Two α-particles remove 8 mass units and 4 charges: A = 231 − 8 = 223, Z = 91 − 4 = 87. Z = 87 is Fr, so the product is Fr223.

Teacher's Note: Add the proton, then subtract 2 α-particles: A − 8, Z − 4.

Exam Note: Absorb p, then lose two α.

Question 118. 84Po210 → 82Pb206 + 2He4. In this reaction predict the position of group of Po when Pb is in the IV B group:
(a) II B (b) IV B (c) VI A (d) VI B

Solution. Answer: (d). In α-emission the daughter element lies two places to the left of the parent. So the parent Po lies two places to the right of Pb, which is in group IV B, placing Po in group VI B.

Teacher's Note: α-emission shifts the daughter two places left, so the parent is two places right.

Exam Note: Parent is two groups right of daughter.

Question 119. 90Th is a member of III group on losing α-particle forms a new elements belonging to:
(a) I group (b) II group (c) III group (d) IV group

Solution. Answer: (b). By the group displacement law, α-emission gives an element that lies two places to the left in the periodic table: from the III group, the new element (Ra) belongs to the II group.

Teacher's Note: α-emission moves the element two places to the left in the periodic table.

Exam Note: α-decay: two places left, Ra in II group.

Question 120. Alpha decay of 92U238 forms 90Th234. What kind of decay from 90Th234 produces 89Ac234?
(a) α (b) β (c) β+ (positron) (d) γ-emission

Solution. Answer: (c). Th234 (Z = 90) to Ac234 (Z = 89): the mass number is unchanged and Z decreases by 1. That is positron (β+) emission (p → n + e+), or electron capture.

Teacher's Note: Z falls by 1 with A unchanged: positron emission or electron capture.

Exam Note: A same, Z − 1: positron emission.

Question 121. 83Bi214 decays to A by α-emission; A then decays to B by beta emission, which decays to C by another beta emission. Element C decays to D by still another beta emission, and D decays by α-emission to a stable isotope E. What is an element E?
(a) 81Tl207 (b) 80Hg206 (c) 79Au206 (d) 82Pb206

Solution. Answer: (d). Bi-214 (83) − α gives A = Tl-210 (81); − β gives B = Pb-210 (82); − β gives C = Bi-210 (83); − β gives D = Po-210 (84); − α gives E = 82Pb206.

Teacher's Note: Follow Z and A step by step: α: Z − 2, A − 4; β: Z + 1.

Exam Note: Track Z and A through each step.

Question 122. The activity of a radioactive nuclide (X100) is 6.023 curie at a certain time 't'. If its disintegration constant is 3.7 × 104 s−1 the mass of X after t sec is:
(a) 6.022 × 106 g (b) 10−13 g (c) 10−15 g (d) 10−17 g

Solution. Answer: (c). A = λN: 6.023 × 3.7 × 1010 dps = 3.7 × 104 N, so N = 6.023 × 106 atoms. Mass = (100 g/6.023 × 1023 atoms) × 6.023 × 106 = 10−15 g.

Teacher's Note: Convert curie to disintegrations per second (1 Ci = 3.7 × 1010), then N = A/λ.

Exam Note: N = A/λ; convert curie to dps first.

Question 123. Activity of a radioactive substance is A1 at time t1 and A2 at time t2 (t2 > t1), then the ratio of A2/A1 is:
(a) eλ(t2 + t1) (b) eλ(t1 − t2) (c) e−λ(t1 + t2) (d) t2/t1

Solution. Answer: (b). A = A0e−λt, so A2/A1 = e−λt2/e−λt1 = e−λ(t2 − t1) = eλ(t1 − t2), which is less than 1.

Teacher's Note: Divide the two exponential decay expressions; the ratio depends on the time difference.

Exam Note: Ratio depends on t2 − t1 only.

Question 124. The half-life of 6C14 is 5730 year. What fraction of it's original C14 would left after 22920 year of storage?
(a) 0.50 (b) 0.25 (c) 0.125 (d) 0.0625

Solution. Answer: (d). Number of half-lives n = 22920/5730 = 4. Fraction left = (1/2)4 = 1/16 = 0.0625.

Teacher's Note: Count half-lives, then halve that many times.

Exam Note: Fraction = (1/2)t/t1/2.

Question 125. A radioactive sample had an initial activity of 56 dpm. After 69.3 minutes, it was found to have an activity of 28 dpm. Find the number of atoms in a sample having an activity of 100 dpm.
(a) 693 (b) 100 (c) 1000 (d) 10,000

Solution. Answer: (d). Activity halves in 69.3 min, so t1/2 = 69.3 min and λ = 0.693/69.3 = 10−2 min−1. N = A/λ = 100/10−2 = 10,000 atoms.

Teacher's Note: Half-life gives λ; atoms = activity divided by λ.

Exam Note: N = A/λ with consistent time units.

Question 126. A radioactive sample has initial activity of 28 dpm 30 minutes later its activity 14 dpm. How many atoms of nuclide were present initially?
(a) 2800 (b) 1217 (c) 528 (d) 2802

Solution. Answer: (b). Activity halves in 30 min, so t1/2 = 30 min and λ = 0.693/30 = 0.0231 min−1. N0 = A0/λ = 28/0.0231 ≈ 1212, closest to the option 1217.

Teacher's Note: Half-life gives λ; initial atoms = initial activity divided by λ.

Exam Note: N0 = A0/λ.

Question 127. The half-life of Co60 is 5.27 year (λ = 2.5 × 10−7 min−1). The activity of 2.09 of the sample is nearly: (the book omits the unit of the sample amount)
(a) 5 × 105 dpm (b) 2.5 × 1010 dpm (c) 5 × 1010 dpm (d) 1010 dpm

Solution. Answer (from key): (c). The statement as printed omits the unit of the sample amount, so the answer cannot be re-derived. Activity = λN, and 5 × 1010 dpm corresponds to N = 5 × 1010/(2.5 × 10−7) = 2 × 1017 atoms. (λ = 0.693/(5.27 × 365 × 24 × 60) = 2.5 × 10−7 min−1 checks.)

Teacher's Note: Activity = λN; check λ first by converting half-life years to minutes.

Exam Note: A = λN with λ in min−1 for dpm.

Question 128. Half-life (t1/2) for a radioactive decay is 6930 sec. The time required to fall the rate of decay by (1/100)th of it's initial value is:
(a) 69.3 sec (b) 20,000 sec (c) 23030 sec (d) none of these

Solution. Corrected: (d). λ = 0.693/6930 = 10−4 s−1. Rate falls to 1/100: t = (2.303/λ) log 100 = 2 × 2.303/10−4 = 46060 s (≈ 4.6 × 104 s), not among (a)-(c). (23030 s is the time for the rate to fall to 1/10. Printed key: (c).)

Teacher's Note: Falling to 1/100 needs log 100 = 2, twice the time for 1/10.

Exam Note: Rate to 1/100: t = 2 × 2.303/λ.

Question 129. A sample of radioactive substance is found to have 90% of it's initial amount after one day. What % of the original sample can be found after 3 days?
(a) 81 (b) 72.9 (c) 25 (d) 65.61

Solution. Answer: (b). Equal fractions decay in equal times (first order). Fraction left after 3 days = (0.9)3 = 0.729 = 72.9%.

Teacher's Note: Equal periods give equal fractions remaining, so multiply 0.9 three times.

Exam Note: Fraction = 0.93.

Question 130. If time t is required for a radioactive substance to become one third of it's initial amount, what fraction would be left after 0.5 t?
(a) 1/2 (b) 1/√3 (c) 1/3 (d) √(2/3)

Solution. Answer: (b). N/N0 = e−λt = 1/3 at time t. At 0.5t, N/N0 = e−λt/2 = (1/3)1/2 = 1/√3.

Teacher's Note: Halving the time takes the square root of the fraction remaining.

Exam Note: Fraction at t/2 = square root of fraction at t.

Question 131. The present activity of the hair of Egyptian mummy is 1.75 dpm. t1/2 of 6C14 is 5770 year and disintegration rate of fresh sample of C14 is 14 dpm. Find out age of mummy.
(a) 23080 year (b) 138480 year (c) 11998.3 year (d) 17313.6 year

Solution. Answer: (d). A0/A = 14/1.75 = 8 = 23, so three half-lives have elapsed. Age = (1/λ) ln 8 = (5770/0.693) × ln 8 ≈ 17313.6 years (3 × 5770 = 17310).

Teacher's Note: Ratio 8 means exactly three half-lives.

Exam Note: A0/A = 2n gives n half-lives.

Question 132. The amount of 6C14 isotope in a piece of wood is found to one fourth (1/4) of that present in a fresh piece of wood. Calculate the age of the piece of wood (t1/2 of 6C14 = 5770 years)
(a) 7999 year (b) 11540 year (c) 16320 year (d) 23080 year

Solution. Answer: (b). One fourth left means two half-lives: age = 2 × 5770 = 11540 years.

Teacher's Note: One quarter remaining is two successive halvings.

Exam Note: 1/4 left = 2 half-lives.

Question 133. A radioactive element undergoing decay is left 20% of it's initial weight after certain period of time t, how many such periods should elapse from the start for the 50% of the element to be left over?
(a) 3 (b) 4 (c) 5 (d) None of these

Solution. Answer: (d). For 20% left: t = (1/λ) ln 5. For 50% left: t' = (1/λ) ln 2. So t'/t = ln 2/ln 5 = 0.43. Only 0.43 of such a period is needed, which is none of (a)-(c).

Teacher's Note: Compare times with ln(N0/N); 50% is reached earlier than 20%.

Exam Note: 50% is left sooner than 20%: ratio ln 2/ln 5.

Question 134. In a sample of wood, the reading of a counter is 32 dpm and in a fresh sample of tree it is 122dpm. Due to error counter gives the reading 2 dpm in absence of 14C. Half life of 14C is 5770 years. The approximate age (in years) of wood sample is:
(a) 7997.2 (b) 57570 (c) 11,540 (d) 15140

Solution. Answer: (c). Correct for the counter error by subtracting 2 dpm from each reading: 30 dpm and 120 dpm. Age = (5770/0.693) ln(120/30) = (5770/0.693) × 2 × 0.693 = 11540 years.

Teacher's Note: Subtract the instrument background from both readings first.

Exam Note: Subtract background count from both readings.

Question 135. A 0.50g sample of rock was found to have 2.5 × 10−6 mol of 19K40 (t1/2 = 1.3 × 109 yr) and 7.5 × 10−6 mole of 20Ca40. How old is the rock?
(a) 6.5 × 108 yr (b) 1.3 × 109 yr (c) 2.6 × 109 yr (d) 5.2 × 109 yr

Solution. Answer: (c). 19K40 → 20Ca40 + −1e0. Present K = 2.5 × 10−6 mol; Ca formed = 7.5 × 10−6 mol, so initial K = 10 × 10−6 mol. t = (1/λ) ln(10/2.5) = (1.3 × 109/0.693) × ln 4 = 2.6 × 109 years (taking all Ca as formed from K).

Teacher's Note: Initial parent equals remaining parent plus daughter formed.

Exam Note: N0 = parent left + daughter formed.

Question 136. Indium-112 is radioactive and has a very short half-life (t1/2 = 14 min). It's decay constant and average life are respectively:
(a) 0.0495 min−1, 9.7 min (b) 0.495 min−1, 20.2 min (c) 9.7 min−1, 20.2 min (d) 0.0495, 20.2 min

Solution. Answer: (d). λ = 0.693/14 = 0.0495 min−1. Average life = 1/λ = 20.2 min (= 1.44 × 14).

Teacher's Note: Average life is the reciprocal of the decay constant, 1.44 t1/2.

Exam Note: λ = 0.693/t1/2; tav = 1/λ.

Question 137. The half-life of a radio element is 100 minutes. The time interval between the stages 50% and 87.5% decay will be:
(a) 100 min (b) 50 min (c) 200 min (d) 25 min

Solution. Answer: (c). 50% decayed means 50% left; 87.5% decayed means 12.5% left. From 50% to 12.5% is two half-lives = 200 min.

Teacher's Note: Convert decay percentages to amounts left, then count half-lives.

Exam Note: Decay % to remaining %: 50% to 12.5%.

Question 138. The half-life of Tc99 is 6.0 hr. The total residual activity in a patient 30 hr after receiving an injection containing Tc99 must be more than 0.01 µCi. What is the maximum activity (in µCi) that the sample injected may have? [As printed; the working treats 0.01 µCi as the required residual, giving the minimum initial activity.]
(a) 0.16 (b) 0.32 (c) 0.64 (d) 0.08

Solution. Answer: (b). 30 hr = 5 half-lives (30/6). Initial activity = residual × 25 = 0.01 × 32 = 0.32 µCi.

Teacher's Note: Five half-lives reduce activity by 25 = 32.

Exam Note: A0 = A × 2n.

Question 139. A pure radio-chemical preparation was observed to disintegrate at the rate of 2140 counts/minutes at 12.35 P.M. At 3.55 P.M. of the same day, the disintegration rate of the sample was only 535 count/minute. What is the half-life of the material?
(a) 50 min (b) 100 min (c) 200 min (d) None of these

Solution. Answer: (b). Elapsed time = 12.35 P.M. to 3.55 P.M. = 3 h 20 min = 200 min. 2140/535 = 4 = 22, so two half-lives in 200 min and t1/2 = 100 min. (λt = ln(2140/535) = ln 4 gives the same.)

Teacher's Note: Work out the elapsed clock time carefully, then count half-lives.

Exam Note: Rate fell to 1/4: two half-lives.

Question 140. A certain radioactive isotope zXA (t1/2 = 100 days) decays to z−2YA−8. If 1 mole of zXA is kept in sealed container, how much He gas will accumulate at STP in 200 days?
(a) 11.2 litre (b) 33.6 litre (c) 22.4 litre (d) 44.8 litre

Solution. Answer: (b). Mass number falls by 8 (two α-particles) while Z falls by only 2: two α lower Z by 4 and two β− raise it by 2. So each decaying atom yields 2 He atoms. In 200 days (2 half-lives) 3/4 of 1 mol decays = 0.75 mol, giving 1.5 mol He = 1.5 × 22.4 = 33.6 L.

Teacher's Note: Each atom emits two α-particles (A drops by 8); 200 days is two half-lives.

Exam Note: He moles = 2 × decayed moles.

Question 141. A radioactive substance decay 25% in 10 minute. If at start there are 4 × 1020 atoms present, after what time will the number of atoms be reduced to 1020 atoms? (given ln 3 = 1.098)
(a) 10.98 min (b) 21.97 min (c) 48.19 min (d) None of these

Solution. Answer: (c). λ = (1/10) ln(100/75) = (1/10) ln(4/3). Time for 4 × 1020 to fall to 1020: t = (1/λ) ln 4 = 10 ln 4/ln(4/3) = 10 × 1.386/0.2877 = 48.19 min.

Teacher's Note: First get λ from the 25% decay, then use N = N0e−λt.

Exam Note: Get λ from 75% remaining at 10 min.

Question 142. The time of decay for a nuclear reaction is given by t = 4t1/2. The relation between mean life (T) and time of decay (t) is given by:
(a) 2T ln 2 (b) 4T ln 2 (c) 2T4 ln 2 (d) (1/T2) ln 2

Solution. Answer: (b). Mean life T = 1/λ and t1/2 = ln 2/λ = T ln 2. So t = 4t1/2 = 4T ln 2.

Teacher's Note: Mean life T = 1/λ, so half-life = T ln 2.

Exam Note: t1/2 = T ln 2.

Question 143. Two radio isotopes A and B of atomic weight X and Y are mixed in equal amount by weight. After 20 days, their weight ratio is found to be 4 : 1 (WB : WA). Isotope A has a half-life of 1 day. The half-life of isotope B is:
(a) 1.11 (Y/X) day (b) 0.11 (X/Y) day (c) 0.6237 day (d) 1.11 day

Solution. Answer: (d). λA = 0.693/1 = 0.693 day−1. λA − λB = (2.303/20) log(WB/WA) = (2.303/20) log 4 = 0.0693. So λB = 0.693 − 0.0693 = 0.6237 day−1 and t1/2(B) = 0.693/0.6237 = 1.11 days. (The ratio 4:1 is taken as B:A, per the printed solution.)

Teacher's Note: Equal initial weights make the weight ratio depend only on λA − λB.

Exam Note: Ratio of weights gives λA − λB.

Question 144. Two radioactive nuclides A and B have half-lives 50 min and 10 min respectively. A fresh sample contains the nuclide of B to be eight time that of A. How much time should elapse so that the number of nuclides of A becomes double of B?
(a) 30 (b) 40 (c) 50 (d) 100

Solution. Answer: (c). λA = 0.693/50, λB = 0.693/10. Initially NA/NB = 1/8. NA/NB = (1/8)e(λB − λA)t = 2, so e(λB − λA)t = 16. t = ln 16/(0.0693 − 0.01386) = 2.7726/0.05544 = 50 min.

Teacher's Note: Ratio of the two exponentials gives e(λB − λA)t; set it to 16.

Exam Note: N ratio changes as e(λB − λA)t.

Question 145. A radioactive nuclide is produced at a constant rate of α per second. It's decay constant is λ. If N0 be the no. of nuclei at time t = 0, then max. no. of nuclei possible are:
(a) N0 (b) α/λ (c) N0 + α/λ (d) λ/α + N0s

Solution. Answer: (b). dN/dt = α − λN. The number is maximum when dN/dt = 0, i.e. N = α/λ.

Teacher's Note: Maximum when production rate equals decay rate (steady state).

Exam Note: Set dN/dt = 0: N = α/λ.

Question 146. An analysis of the rock shows that the relative number of Sr87 and Rb87 (t1/2 = 4.7 × 1010 year) atoms is 0.05. What is the age of the rock? Assume all Sr87 to be formed from Rb87 only.
(a) 7.62 × 109 year (b) 1.43 × 109 year (c) 3.28 × 109 year (d) 4.32 × 108 year

Solution. Answer: (c). Sr/Rb = 0.05, so (Sr + Rb)/Rb = 1.05 = N0/N. t = (2.303/λ) log 1.05 = (2.303/0.693) × 4.7 × 1010 × log 1.05 ≈ 3.3 × 109 years (3.31 × 109 by calculation), closest to option (c) 3.28 × 109.

Teacher's Note: Initial parent equals parent left plus daughter formed.

Exam Note: N0/N = 1 + daughter/parent.

Question 147. There are two radio nuclei A and B. A is a α-emitter and B is β-emitter, their disintegration constant are in the ratio of 1 : 2. What should be the number of atoms of two at time t = 0, so that probability of getting of α and β-particles are same at time t = 0:
(a) 2 : 1 (b) 4 : 1 (c) 1 : 2 (d) 1 : 4

Solution. Answer: (a). Equal probability of emission means equal activities: λANA = λBNB, so NA/NB = λB/λA = 2/1.

Teacher's Note: Equal emission rates need equal activities, so more atoms of the slower decayer.

Exam Note: Equal activity: λANA = λBNB.

Question 148. A radioactive substance (parent) decays to it's daughter element, the age of radioactive substance (t) is related to the daughter (d)/parent (p) ratio by the equation:
(a) t = (1/λ) ln(1 + p/d) (b) t = (1/λ) ln(1 + d/p) (c) t = (1/λ) ln(d/p) (d) t = (1/λ) ln(p/d)

Solution. Answer: (b). N = N0e−λt with N = p and N0 = p + d. So λt = ln((p + d)/p) = ln(1 + d/p), giving t = (1/λ) ln(1 + d/p).

Teacher's Note: Initial parent = parent left + daughter formed.

Exam Note: N0 = p + d.

Question 149. Ac227 has a half-life of 22 years. The decays follows two parallel paths: Ac227 →(λ1) Th227 (% yield = 2) and Ac227 →(λ2) Fr223 (% yield = 98). What are the decay constants (λ) for Th and Fr respectively?
(a) 0.03087, 0.00063 (b) 0.00063, 0.03087 (c) 0.02, 0.98 (d) None of these

Solution. Answer: (b). Total λ = λ1 + λ2 = 0.693/22 = 0.0315 year−1. Yields are proportional to the decay constants: λ1/λ2 = 2/98. So λ1 (Th) = 0.02 × 0.0315 = 0.00063 year−1 and λ2 (Fr) = 0.98 × 0.0315 = 0.03087 year−1.

Teacher's Note: In parallel decay the branching fraction equals λi/λtotal.

Exam Note: Branch yield = λi/(λ1 + λ2).

Question 150. 84Po218 (t1/2 = 183 sec) decay to 82Pb214 by α-emission, while Pb214 (t1/2 = 161 sec) is a β-emitter. In an experiment starting with 1 mole of pure Po218, how much time would be required for the number of nuclei of 82Pb214 to reach maximum?
(a) 147.5 (b) 247.5 (c) 182 (d) 304

Solution. Answer: (b). For series decay A → B → C, tmax = [1/(λ1 − λ2)] ln(λ1/λ2). Here λ1 = 0.693/183 and λ2 = 0.693/161, so tmax = 247.5 s.

Teacher's Note: Intermediate in a series decay peaks when its production equals its decay.

Exam Note: tmax = ln(λ1/λ2)/(λ1 − λ2).

Download Narendra Awasthi Solutions for JEE Math PDF

Chapter-wise Narendra Awasthi Solutions: Narendra Awasthi Solutions Physical Chemistry Chapter 7 Chemical Kinetics Nuclear Chemistry Part 1

Access the complete chapter-wise PDF for Narendra Awasthi Solutions Physical Chemistry Chapter 7 Chemical Kinetics Nuclear Chemistry Part 1. These structured Narendra Awasthi Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Detailed Calculation Guides for JEE

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Next Steps in Your Mathematics Revision

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.