OP Tandon Solutions Physical Chemistry IIT JEE Chapter 7 Chemical Thermodynamics Thermochemistry Part 2

Step-by-Step OP Tandon Solutions for JEE Chemistry Chapter 07 Chemical Thermodynamics Thermochemistry

Review structured textbook solutions for JEE Chemistry Chapter 07 Chemical Thermodynamics Thermochemistry prepared by OP Tandon. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 07 Chemical Thermodynamics Thermochemistry Textbook Solutions PDF

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chemical Thermodynamics and Thermochemistry - Part 2 (Entropy, Gibbs Free Energy, Practice Problems)

Some Solved Examples

Example 62. The enthalpy change for the transition of liquid water to steam, ΔHvapour is 40.8 kJ mol-1 at 373 K. Calculate entropy change for the process.

Solution. The transition is H2O(l) → H2O(g). ΔSvapour = ΔHvapour/T. Given ΔHvapour = 40.8 kJ mol-1 = 40.8 × 1000 J mol-1, T = 373 K. Thus ΔSvapour = (40.8 × 1000)/373 = 109.38 J K-1 mol-1.

Teacher's Note: Phase change at its boiling point is reversible, so ΔS = ΔH/T with T in kelvin.

Exam Note: Convert kJ to J before dividing.

Example 63. What is entropy change for the conversion of one gram of ice to water at 273 K and one atmospheric pressure? (ΔHfusion = 6.025 kJ mol-1)

Solution. ΔHfusion = 6.025 × 1000 J mol-1 = (6025/18) J g-1 = 334.72 J g-1. ΔSfusion = ΔHfusion/Tf = 334.72/273 = 1.226 J K-1 g-1.

Teacher's Note: Per gram, divide the molar enthalpy by 18 g mol-1 first.

Exam Note: Check whether the answer is per gram or per mole.

Example 64. Calculate the enthalpy of vaporisation per mole for ethanol. Given, ΔS = 109.8 J K-1 mol-1 and boiling point of ethanol is 78.5°C.

Solution. ΔSvapour = ΔHvapour/Tbp. Given ΔSvapour = 109.8 J K-1 mol-1, Tbp = 78.5 + 273 = 351.5 K. So 109.8 = ΔHvapour/351.5, giving ΔHvapour = 38594.7 J mol-1 = 38.594 kJ mol-1.

Teacher's Note: Rearrange ΔS = ΔH/T to ΔH = TΔS; convert °C to K first.

Exam Note: Forgetting to add 273 to the Celsius temperature loses marks.

Example 65. Calculate the entropy change for the following reversible process: α-Tin ⇌ β-Tin (1 mol at 1 atm each) at 13°C (ΔHtrans = 2090 J mol-1).

Solution. ΔStrans = ΔHtrans/T = 2090/286 = 7.3076 J K-1 mol-1.

Teacher's Note: A reversible solid-solid transition at its transition temperature also obeys ΔS = ΔH/T.

Exam Note: T = 13 + 273 = 286 K.

Example 66. At 0°C, ice and water are in equilibrium and enthalpy change for the process H2O(s) ⇌ H2O(l) is 6 kJ mol-1. Calculate the entropy change for the conversion of ice into liquid water.

Solution. For fusion, ΔSfusion = ΔHfusion/Tf = (6 × 1000)/273 = 21.98 J K-1 mol-1.

Teacher's Note: At equilibrium ΔG = 0, so ΔS = ΔH/T exactly.

Exam Note: State units J K-1 mol-1; convert 6 kJ to J.

Example 67. The enthalpy of vaporisation of liquid diethyl ether (C2H5)2O is 26 kJ mol-1 at its boiling point 35°C. Calculate ΔS° for conversion of: (a) liquid to vapour, (b) vapour to liquid at 35°C.

Solution. (a) ΔSvaporisation = ΔHvaporisation/Tbp = 26000/308 = 84.42 J K-1 mol-1.
(b) ΔScondensation = −ΔHvaporisation/Tbp = −84.42 J K-1 mol-1.

Teacher's Note: The reverse process has equal magnitude and opposite sign of entropy change.

Exam Note: Condensation entropy change is negative.

Example 68. Calculate entropy change when 10 moles of an ideal gas expands reversibly and isothermally from an initial volume of 10 litre to 100 litre at 300 K.

Solution. ΔS = 2.303 nR log(V2/V1) = 2.303 × 10 × 8.314 × log(100/10) = 191.24 J K-1 (as printed). Corrected: 2.303 × 10 × 8.314 × 1 = 191.5 J K-1.

Teacher's Note: Isothermal expansion: ΔS = nR ln(V2/V1); temperature does not enter.

Exam Note: Tenfold volume gives log term 1; use R = 8.314.

Example 69. Oxygen gas weighing 64 g is expanded from 1 atm to 0.25 atm at 30°C. Calculate entropy change, assuming the gas to be ideal.

Solution. n = w/m.wt. = 64/32 = 2. ΔS = 2.303 nR log(P1/P2) = 2.303 × 2 × 8.314 × log(1/0.25) = 23.053 J K-1.

Teacher's Note: Isothermal: ΔS = nR ln(P1/P2); pressure falls so entropy rises.

Exam Note: Positive sign expected for expansion; find moles first.

Example 70. Calculate the change in entropy when 1 mole nitrogen gas expands isothermally and reversibly from an initial volume of 1 litre to a final volume of 10 litre at 27°C.

Solution. ΔS = 2.303 nR log(V2/V1) = 2.303 × 1 × 8.314 × log(10/1) = 19.12 J K-1 (as printed). Corrected: 2.303 × 8.314 × 1 = 19.15 J K-1.

Teacher's Note: Same formula as Example 68 with n = 1; temperature is irrelevant.

Exam Note: Write R as 8.314 J K-1 mol-1.

Illustrations of Objective Questions

Question 34. For a liquid, enthalpy of fusion is 1.435 kcal mol-1 and molar entropy change is 5.26 cal mol-1 K-1. The melting point of the liquid is: (a) 0°C (b) −273°C (c) 173 K (d) 100°C

Solution. Answer: (a). ΔSfusion = ΔHfusion/Tmp, so 5.26 = 1.435 × 1000/Tmp, Tmp = 1435/5.26 = 273 K, i.e. 0°C.

Teacher's Note: Melting point equals ΔHfus/ΔSfus; convert kcal to cal.

Exam Note: 273 K is 0°C.

Question 35. Latent heat of vaporisation of water is 540 cal g-1 at 100°C. Calculate the entropy change when 1000 g water is converted to steam at 100°C. (a) 1447 cal (b) 2447 cal (c) 3447 cal (d) 4447 cal

Solution. Answer: (a). ΔSvap = ΔHvap/T = (540 × 1000)/373 = 1447 cal K-1.

Teacher's Note: Multiply latent heat by mass, then divide by 373 K.

Exam Note: Unit is cal K-1; the option omits K-1.

Question 36. Enthalpy of fusion of water is 6.01 kJ mol-1. The entropy change of 1 mole of ice at its melting point will be: (a) 22 kJ mol-1 (b) 109 kJ mol-1 (c) 44 kJ mol-1 (d) 11 kJ mol-1

Solution. Answer: (a). ΔSfusion = ΔHfusion/Tmp = (6.01 × 1000)/273 = 22 (the true unit is J K-1 mol-1; the printed option unit is a misprint).

Teacher's Note: Divide 6010 J mol-1 by 273 K.

Exam Note: Real unit is J K-1 mol-1, not kJ.

Question 37. For spontaneous process: (a) ΔStotal = 0 (b) ΔStotal > 0 (c) ΔStotal < 0 (d) none of these

Solution. Answer: (b). ΔStotal = ΔSsystem + ΔSsurroundings is positive for a spontaneous process.

Teacher's Note: Second-law criterion: entropy of the universe increases in spontaneous change.

Exam Note: Zero means equilibrium; negative means non-spontaneous.

Question 38. Melting point of a solid is x K and its latent heat of fusion is 600 cal mol-1. The entropy change for fusion of 1 mol solid is 2 cal mol-1 K-1. The value of x will be: (a) 100 K (b) 200 K (c) 300 K (d) 400 K

Solution. Answer: (c). ΔHfusion/Tmp = ΔSfusion, so 600/T = 2, T = 300 K.

Teacher's Note: Tmp = ΔH/ΔS; units cal cancel consistently.

Exam Note: Direct one-line substitution; no unit conversion needed.

Question 39. The entropy change involved in the conversion of 1 mole of liquid water at 373 K to vapour at the same temperature will be (ΔHvap = 2.257 kJ/g): (a) 0.119 kJ (b) 0.109 kJ (c) 0.129 kJ (d) 0.120 kJ

Solution. Answer: (b). ΔS = ΔHvap/T = (2.257 × 18)/373 = 0.109 kJ K-1 mol-1 (0.109 kJ/g as printed in the hint).

Teacher's Note: Multiply the per-gram value by 18 g mol-1 before dividing by T.

Exam Note: Molar mass 18 is the trap; 2.257 is per gram.

Some Solved Examples (Gibbs Free Energy)

Example 71. ΔH and ΔS for the reaction Ag2O(s) → 2Ag(s) + ½O2(g) are 30.56 kJ mol-1 and 66.0 J K-1 mol-1 respectively. Calculate the temperature at which free energy change for the reaction will be zero. Predict whether the forward reaction will be favoured above or below this temperature.

Solution. At equilibrium ΔG = 0, so 0 = ΔH − TΔS, T = ΔH/ΔS. ΔH = 30.56 kJ mol-1 = 30560 J mol-1, ΔS = 66.0 J K-1 mol-1. T = 30560/66 = 463 K. Above this temperature, ΔG will be negative and the process will be spontaneous in the forward direction.

Teacher's Note: Both ΔH and ΔS positive: reaction turns spontaneous at high temperature.

Exam Note: Give T = ΔH/ΔS and state forward favoured above 463 K.

Example 73. In the reaction A+ + B → A + B+, there is no entropy change. If enthalpy change is 22 kJ of A+, calculate ΔG for the reaction.

Solution. ΔH = 22 kJ, ΔS = 0. ΔG = ΔH − TΔS = 22 − T × 0 = 22 kJ mol-1.

Teacher's Note: With ΔS = 0 the temperature term vanishes, so ΔG = ΔH at any T.

Exam Note: Positive ΔG means non-spontaneous at all temperatures.

Example 74. ΔH and ΔS for the reaction Br2(l) + Cl2(g) → 2BrCl(g) are 29.37 kJ and 104.0 J K-1 respectively. Above what temperature will this reaction become spontaneous?

Solution. According to the Gibbs-Helmholtz equation ΔG = ΔH − TΔS. For a spontaneous process ΔG < 0, i.e. ΔH − TΔS < 0, TΔS > ΔH, T > ΔH/ΔS = (29.37 × 1000)/104, so T > 282.4 K.

Teacher's Note: Positive ΔH and ΔS: spontaneity needs T above ΔH/ΔS.

Exam Note: Convert ΔH to J before dividing.

Example 75. Calculate the temperature at which liquid water will be in equilibrium with water vapour. ΔHvap = 40.73 kJ mol-1 and ΔSvap = 0.109 kJ mol-1 K-1.

Solution. At equilibrium ΔG = 0. ΔG = ΔH − TΔS gives 0 = 40.73 − T × 0.109, so T = 40.73/0.109 = 373.6 K (calculated value is 373.7 K).

Teacher's Note: Equilibrium between phases means ΔG = 0 and T = ΔH/ΔS, the boiling point.

Exam Note: Keep both quantities in kJ.

Example 76. Zinc reacts with dilute hydrochloric acid to give hydrogen at 17°C. The enthalpy of the reaction is −12.55 kJ mol-1 of zinc and entropy change equals 5.0 J K-1 mol-1 for the reaction. Calculate the free energy change and predict whether the reaction is spontaneous or not.

Solution. ΔH = −12.55 kJ mol-1, ΔS = 5.0 J K-1 mol-1 = 0.005 kJ K-1 mol-1, T = 17 + 273 = 290 K. ΔG = ΔH − TΔS = −12.55 − 0.005 × 290 = −12.55 − 1.45 = −14.00 kJ mol-1. Since ΔG is negative, the reaction will be spontaneous.

Teacher's Note: Exothermic with positive ΔS: both factors favour spontaneity.

Exam Note: Convert 5.0 J to 0.005 kJ before multiplying by T.

Example 77. ΔH and ΔS for the system H2O(l) ⇌ H2O(g) at 1 atmosphere pressure are 40.63 kJ mol-1 and 108.8 J K-1 mol-1 respectively. Calculate the temperature at which the rates of forward and backward reactions will be the same. Predict the sign of free energy for this transformation above this temperature.

Solution. ΔH = 40.63 kJ mol-1, ΔS = 108.8 J K-1 mol-1 = 0.1088 kJ K-1 mol-1. Equal rates means equilibrium, ΔG = 0: 0 = 40.63 − T × 0.1088, T = 40.63/0.1088 = 373.4 K. Above 373 K, say 374 K: ΔG = 40.63 − 374 × 0.1088 = 40.63 − 40.69 = −0.06 kJ. ΔG is negative; hence the reaction will be spontaneous.

Teacher's Note: Equal forward and backward rates is equilibrium, so ΔG = 0 at 373.4 K.

Exam Note: Test a temperature just above to fix the sign of ΔG.

Example 78. For the reaction SOCl2 + H2O → SO2 + 2HCl, the enthalpy of reaction is 49.4 kJ and the entropy of reaction is 336 J K-1. Calculate ΔG at 300 K and predict the nature of the reaction.

Solution. ΔG = ΔH − TΔS = 49.4 − (300 × 336 × 10-3) = −51.4 kJ. Since the free energy change is negative, the given reaction is spontaneous.

Teacher's Note: Large positive ΔS outweighs positive ΔH at 300 K.

Exam Note: Convert 336 J to 0.336 kJ.

Example 79. The standard enthalpy and entropy changes for the reaction in equilibrium for the forward direction are given below: CO(g) + H2O(g) ⇌ CO2(g) + H2(g); ΔH°300 K = −41.16 kJ mol-1, ΔS°300 K = −4.24 × 10-2 kJ mol-1, ΔH°1200 K = −32.93 kJ mol-1, ΔS°1200 K = −2.96 × 10-2 kJ mol-1. Calculate KP at each temperature and predict the direction of reaction at 300 K and 1200 K, when PCO = PCO2 = PH2 = PH2O = 1 atm at initial state.

Solution. At 300 K: ΔG° = ΔH° − TΔS° = −41.16 − 300 × (−4.24 × 10-2) = −28.44 kJ. ΔG° is negative, hence the reaction is spontaneous in the forward direction. ΔG° = −2.303RT log KP: −28.44 = −2.303 × 8.314 × 10-3 × 300 log KP, KP = 8.93 × 104.
At 1200 K: ΔG° = −32.93 − 1200 × (−2.96 × 10-2) = +2.59 kJ. Positive ΔG° shows that the reaction is spontaneous in the backward direction. 2.59 = −2.303 × 8.314 × 10-3 × 1200 log KP, KP = 0.77.

Teacher's Note: Use ΔG° = −RT ln K; K > 1 forward, K < 1 backward at standard state.

Exam Note: Show ΔG° first, then KP; use kJ with R in kJ.

Example 80. The standard Gibbs free energies for the reactions at 1773 K are given below: C(s) + O2(g) → CO2(g); ΔG° = −380 kJ mol-1; 2C(s) + O2(g) ⇌ 2CO(g); ΔG° = −500 kJ mol-1. Discuss the possibility of reducing Al2O3 and PbO with carbon at this temperature: 4Al + 3O2(g) → 2Al2O3(s); ΔG° = −22500 kJ mol-1; 2Pb + O2(g) → 2PbO(s); ΔG° = −120 kJ mol-1.

Solution. Reduction of Al2O3 by carbon: 2Al2O3 + 3C(s) → 4Al(s) + 3CO2(g); ΔG° = −380 × 3 + 22500 = +21360 kJ. 2Al2O3 + 6C(s) → 4Al(s) + 6CO(g); ΔG° = −500 × 3 + 22500 = +21000 kJ. Positive values of ΔG° show that the reduction of Al2O3 is not possible by any of the above methods.
Reduction of PbO: 2PbO(s) + C → 2Pb + CO2; ΔG° = +120 + (−380) = −260 kJ. 2PbO(s) + 2C → 2Pb + 2CO; ΔG° = +120 + (−500) = −380 kJ. Negative values of ΔG° show that the process is spontaneous and PbO can be reduced by carbon.

Teacher's Note: Reverse the oxide formation equation (sign flips) and add the carbon oxidation ΔG°.

Exam Note: Add ΔG° values with proper scaling; negative total means feasible.

Example 81. In a fuel cell, methanol is used as fuel and oxygen gas is used as an oxidiser. The reaction is CH3OH(l) + (3/2)O2(g) → CO2(g) + 2H2O(l). Calculate standard Gibbs free energy change for the reaction that can be converted into electrical work. If standard enthalpy of combustion for methanol is −726 kJ mol-1; calculate the efficiency of conversion of Gibbs free energy into useful work. ΔG°f for CO2, H2O, CH3OH, O2 are −394.36; −237.13; −166.27 and zero respectively.

Solution. ΔG°reaction = [ΔG°f(CO2) + 2ΔG°f(H2O)] − [ΔG°f(CH3OH) + (3/2)ΔG°f(O2)] = [−394.36 + 2(−237.13)] − [−166.27 + 0] = −702.35 kJ mol-1. Efficiency = (ΔG°reaction/ΔH°reaction) × 100 = (−702.35 × 100)/(−726) = 96.7%.

Teacher's Note: Maximum electrical work equals −ΔG°; efficiency compares ΔG° with ΔH°.

Exam Note: Elements in standard state have ΔGf = 0.

Example 82. Will the reaction I2(s) + H2S(g) → 2HI(g) + S(s) proceed spontaneously in the forward direction at 298 K, ΔG°f HI(g) = 1.8 kJ mol-1, ΔG°f H2S(g) = 33.8 kJ mol-1?

Solution. ΔG° = ΣΔG°f(products) − ΣΔG°f(reactants) = [2ΔG°f HI(g) + ΔG°f S(s)] − [1 × ΔG°f I2(s) + ΔG°f H2S(g)] = [2 × 1.8 + 0] − [0 + 33.8] = −30.2 kJ. The negative value shows that the process is spontaneous in forward direction.

Teacher's Note: Multiply ΔGf by stoichiometric coefficients; elements contribute zero.

Exam Note: Negative ΔG° means spontaneous in the forward direction.

Example 83. Compute the standard free energy of the reaction at 27°C for the combustion of methane using the given data: CH4(g) + 2O2(g) → CO2(g) + 2H2O(l). Species: CH4, O2, CO2, H2O; ΔH°f/(kJ mol-1): −74.8, —, −393.5, −285.8; S°/(J K-1 mol-1): 186, 205, 214, 70.

Solution. ΔH° = ΔH°f(CO2) + 2ΔH°f(H2O) − ΔH°f(CH4) = −393.5 + 2 × (−285.8) − (−74.8) = −890 kJ mol-1. ΔS° = S°(CO2) + 2S°(H2O) − S°(CH4) − 2S°(O2) = 214 + 2 × 70 − 186 − 2 × 205 = −242 J K-1 mol-1. ΔG° = ΔH° − TΔS° = −890 − 300 × (−242 × 10-3) = −890 + 72.6 = −817.4 kJ mol-1.

Teacher's Note: Get ΔH° and ΔS° from tables, then combine at 300 K.

Exam Note: Convert ΔS° to kJ; elements have ΔHf = 0.

Illustrations of Objective Questions

Question 40. The free energy for a reaction having ΔH = 31400 cal, ΔS = 32 cal K-1 mol-1 at 1000°C is: (a) −9336 cal (b) −7386 cal (c) −1936 cal (d) +9336 cal [JEE (Orissa) 2005]

Solution. Answer: (a). ΔG = ΔH − TΔS = 31400 − 1273 × 32 = −9336 cal.

Teacher's Note: Convert 1000°C to 1273 K before using ΔG = ΔH − TΔS.

Exam Note: Using 1000 K gives the wrong option.

Question 41. F2C=CF−CF=CF2 → cyclobutene ring (F2C−CF2 bridged by FC=CF) (ring closure): ΔH = −49 kJ mol-1, ΔS = −40.2 J K-1 mol-1. Upto what temperature is the forward reaction spontaneous? (a) 1492°C (b) 1219°C (c) 946°C (d) 1080°C

Solution. Answer: (c). For a spontaneous process ΔG = ΔH − TΔS should be negative, so T < ΔH/ΔS = (−49 × 1000)/(−40.2), T < 1219 K, i.e. 946°C. (The book writes T > 1219 K in its hint, but the correct condition is T below 1219 K since ΔH and ΔS are both negative.) Corrected: the inequality; the option (c) is unchanged.

Teacher's Note: Negative ΔH and ΔS: spontaneous only below T = ΔH/ΔS.

Exam Note: 1219 K minus 273 gives 946°C.

Question 42. For the equilibrium reaction, the value of Gibbs free energy change is: (a) > 0 (b) < 0 (c) = 0 (d) ≠ 0 (DCE 2005)

Solution. Answer: (c). ΔG = 0 at equilibrium.

Teacher's Note: At equilibrium no net driving force exists, so ΔG = 0.

Exam Note: Do not confuse ΔG° with ΔG.

Question 43. At 0°C, ice and water are in equilibrium and ΔH = 6 kJ mol-1. For this process H2O(s) ⇌ H2O(l), the values of ΔS and ΔG for conversion of ice into liquid water at 0°C are: (a) −21.9 J K-1 mol-1 and 0 (b) 0.219 J K-1 mol-1 and 0 (c) 21.9 J K-1 mol-1 and 0 (d) 0.0219 J K-1 mol-1 and 0

Solution. Answer: (c). ΔG = 0, so ΔH − TΔS = 0 and ΔS = ΔH/T = 6000/273 = 21.9 J K-1 mol-1.

Teacher's Note: Equilibrium gives ΔG = 0 and ΔS = ΔH/T; fusion has positive ΔS.

Exam Note: Convert 6 kJ to 6000 J.

Question 44. For a reaction Ag2O(s) → 2Ag(s) + ½O2(g), ΔH, ΔS and T are 40.63 kJ mol-1, 108.8 J K-1 and 373.4 K respectively. Predict the feasibility of the reaction. (a) feasible (b) non-feasible (c) remains at equilibrium (d) not predicted

Solution. Answer: (c). ΔG = ΔH − TΔS = 40.63 × 1000 − 373.4 × 108.8 = 0, so the system is at equilibrium.

Teacher's Note: Compute ΔG numerically; zero means equilibrium.

Exam Note: Use J for both terms.

Question 45. For the homogeneous reactions xA + yB → lY + mZ, ΔH = −30 kJ mol-1, ΔS = −100 J K-1 mol-1. At what temperature the reaction is at equilibrium? (a) 50°C (b) 250°C (c) 100 K (d) 27°C (e) 500 K [PMT (Kerala) 2006]

Solution. Answer: (d). At equilibrium ΔG = 0, so T = ΔH/ΔS = (−30 × 1000)/(−100) = 300 K, i.e. 27°C.

Teacher's Note: Equilibrium temperature is ΔH/ΔS; both negative gives positive T.

Exam Note: Convert 300 K to 27°C to match option.

Question 46. For the reaction CO(g) + ½O2(g) → CO2(g), ΔH and ΔS are −283 kJ and −87 J K-1 mol-1 respectively. It was intended to carry out this reaction at 1000, 1500, 3000 and 3500 K. At which of these temperatures would this reaction be thermodynamically spontaneous? (a) 1500 and 3500 K (b) 3000 and 3500 K (c) 1000, 1500 and 3000 K (d) 1500, 3000 and 3500 K (e) At all of the above temperatures [PMT (Kerala) 2006]

Solution. Answer: (c). ΔG = ΔH − TΔS = −283 + 0.087 T kJ. At 1000 K: −196 kJ (spontaneous). At 1500 K: −152.5 kJ (spontaneous). At 3000 K: −22 kJ (spontaneous). At 3500 K: +21.5 kJ (non-spontaneous). (The scan prints ΔS as −87 J K-1; the hint uses 0.087 kJ K-1 in magnitude.)

Teacher's Note: Exothermic with negative ΔS: spontaneous only below about 3250 K.

Exam Note: Crossover T = 283/0.087 ≈ 3253 K.

Question 47. For a reaction, ΔH = +29 kJ mol-1; ΔS = −35 J K-1 mol-1, at what temperature will the reaction be spontaneous? (a) 828.7°C (b) 828.7 K (c) Spontaneous at all temperature (d) Not possible [PMT (Haryana) 2007]

Solution. Answer: (d). When ΔH = +ve and ΔS = −ve, ΔG = ΔH − TΔS is always positive, so the reaction is non-spontaneous at every temperature.

Teacher's Note: Positive ΔH with negative ΔS gives positive ΔG at all temperatures.

Exam Note: Sign table decides; no calculation needed.

Some Solved Examples (Equilibrium Constant and Third Law)

Example 84. What is the equilibrium constant Kc for the following reaction at 400 K? 2NOCl(g) ⇌ 2NO(g) + Cl2(g); ΔH° = 77.2 kJ and ΔS° = 122 J K-1 at 400 K.

Solution. ΔG° = ΔH° − TΔS° = 77.2 − 400 × 122 × 10-3 = 28.4 kJ = 28.4 × 103 J. ΔG° = −2.303RT log Kc, so log Kc = −ΔG°/(2.303RT) = −(28.4 × 103)/(2.303 × 8.314 × 400) = −3.7081. Kc = antilog(−3.7081) = 1.958 × 10-4.

Teacher's Note: Get ΔG° from ΔH° and ΔS°, then use ΔG° = −2.303RT log K.

Exam Note: Convert ΔS° to kJ; positive ΔG° gives K < 1.

Example 85. For the equilibrium PCl5(g) ⇌ PCl3(g) + Cl2(g) at 25°C, Kc = 1.8 × 10-7. Calculate ΔG° for the reaction (R = 8.314 J K-1 mol-1).

Solution. ΔG° = −2.303RT log Kc = −2.303 × 8.314 × 298 log(1.8 × 10-7) = 38484 J mol-1 = 38.484 kJ mol-1.

Teacher's Note: Very small K gives large positive ΔG°: reaction hardly proceeds.

Exam Note: Log of a number below 1 is negative, so ΔG° is positive.

Example 86. The equilibrium constant at 25°C for the process Co3+(aq.) + 6NH3(aq.) ⇌ [Co(NH3)6]3+(aq.) is 2 × 107. Calculate the value of ΔG° at 25°C. (R = 8.314 J K-1 mol-1) In which direction is the reaction spontaneous when the reactants and products are in standard state?

Solution. ΔG° = −2.303RT log Kc, with Kc = 2 × 107, T = 298 K, R = 8.314 J K-1 mol-1. ΔG° = −2.303 × 8.314 × 298 log(2 × 107) = −120234 J = −12.023 kJ (as printed). Corrected: 2.303 × 8.314 × 298 = 5705.9 and log(2 × 107) = 7.301, so ΔG° = −41659 J ≈ −41.66 kJ. Since ΔG° is negative, the reaction is spontaneous in the forward direction (towards the complex) under standard conditions.

Teacher's Note: Large K means strongly negative ΔG°; complex formation is favoured.

Exam Note: Evaluate 2.303RT first (about 5.71 kJ).

Example 87. The equilibrium constant for the reaction, CO2(g) + H2(g) ⇌ CO(g) + H2O(g) at 298 K is 73. Calculate the value of the standard free energy change (R = 8.314 J K-1 mol-1).

Solution. ΔG° = −2.303RT log Kc = −2.303 × 8.314 × 298 log 73 = −10.632 kJ.

Teacher's Note: K > 1 corresponds to negative ΔG°.

Exam Note: log 73 = 1.863; keep sign negative.

Example 88. For the water gas reaction, C(s) + H2O(g) ⇌ CO(g) + H2(g), the standard Gibbs free energy of reaction (at 1000 K) is −8.1 kJ/mol. Calculate its equilibrium constant.

Solution. K = antilog(−ΔG°/(2.303RT)). With ΔG° = −8.1 kJ mol-1, R = 8.314 × 10-3 kJ K-1 mol-1, T = 1000 K: K = antilog[−(−8.1)/(2.303 × 8.314 × 10-3 × 1000)] = 2.65.

Teacher's Note: Use R in kJ when ΔG° is in kJ.

Exam Note: Check K > 1 for negative ΔG°.

Example 89. Calculate ΔG° for the conversion of oxygen to ozone, (3/2)O2(g) ⇌ O3(g) at 298 K, if Kp for this conversion is 2.47 × 10-29.

Solution. ΔG° = −2.303RT log Kp = −2.303 × 8.314 × 298 log(2.47 × 10-29) = 163228 J mol-1 = 163.228 kJ mol-1.

Teacher's Note: Tiny Kp means ozone formation is strongly non-spontaneous.

Exam Note: log of 2.47 × 10-29 is −28.61.

Example 90. Acetic acid CH3COOH can form a dimer (CH3COOH)2 in the gas phase. The dimer is held together by two H-bonds with a total strength of 66.5 kJ per mol of dimer (the two carboxyl groups are joined by two O···H–O hydrogen bonds in a ring). If at 25°C, the equilibrium constant for the dimerization is 1.3 × 103, calculate ΔS° for the reaction: 2CH3COOH(g) ⇌ (CH3COOH)2(g).

Solution. ΔG° = −2.303RT log K = −2.303 × 8.314 × 298 log(1.3 × 103) = −17767.688 J = −17.767 kJ. ΔG° = ΔH° − TΔS°: −17.767 = −66.5 − 298 × ΔS°, so ΔS° = (−66.5 + 17.767)/298 = −0.163 kJ K-1 (about −163 J K-1).

Teacher's Note: ΔH° is the H-bond strength with negative sign; get ΔS° from ΔG° = ΔH° − TΔS°.

Exam Note: Two molecules joining into one gives negative ΔS°.

Illustrations of Objective Questions

Question 48. What is ΔG° for this reaction? ½N2(g) + (3/2)H2(g) ⇌ NH3(g); Kp = 4.42 × 104 at 25°C. (a) −26.5 kJ mol-1 (b) −11.5 kJ mol-1 (c) −2.2 kJ mol-1 (d) −0.97 kJ mol-1

Solution. Answer: (a). ΔG° = −2.303RT log Kp = −2.303 × 8.314 × 298 log(4.42 × 104) = −26.5 kJ mol-1.

Teacher's Note: Direct use of ΔG° = −RT ln K with K > 1 gives a negative value.

Exam Note: Log of 4.42 × 104 is 4.645.

Question 49. What is the sign of ΔG° and the value of K for an electrochemical cell for which E°cell = 0.80 volt? (a) ΔG° −, K > 1 (b) ΔG° +, K > 1 (c) ΔG° +, K < 1 (d) ΔG° −, K < 1

Solution. Answer: (a). ΔG° = −nFE° is negative for positive E°, and ΔG° = −2.303RT log K then gives K > 1.

Teacher's Note: Positive E° means spontaneous cell reaction, so ΔG° < 0 and K > 1.

Exam Note: Link E°, ΔG° and K in one line.

Question 50. The free energy of formation of NO is 78 kJ mol-1 at the temperature of an automobile engine (1000 K). What is the equilibrium constant for this reaction at 1000 K? ½N2(g) + ½O2(g) ⇌ NO(g). (a) 8.4 × 10-5 (b) 7.1 × 10-9 (c) 4.2 × 10-10 (d) 1.7 × 10-19

Solution. Answer: (a). K = antilog[−ΔG°/(2.303RT)] = antilog[−78 × 1000/(2.303 × 8.314 × 1000)] = 8.4 × 10-5.

Teacher's Note: Positive ΔG° gives K well below 1.

Exam Note: Use R = 8.314 J; convert 78 kJ to J.

Question 51. Equilibrium constant for the reaction H2(g) + I2(g) ⇌ 2HI(g) is Kc = 50 at 25°C. The standard Gibbs free energy change for the reaction will be: (a) −6.964 kJ (b) −9.694 kJ (c) −4.964 kJ (d) −6.496 kJ

Solution. Answer: (b). ΔG° = −2.303RT log Kc = −2.303 × 8.314 × 298 log 50 = −9694 J = −9.694 kJ.

Teacher's Note: Δng = 0 so Kc = Kp; apply ΔG° = −RT ln K.

Exam Note: log 50 = 1.699 gives 9.69 kJ.

Question 52. Standard Gibbs free energy change ΔG° for a reaction is zero. The value of the equilibrium constant will be: (a) 10 (b) 1 (c) 100 (d) ∞

Solution. Answer: (b). ΔG° = −2.303RT log K; when ΔG° = 0, log K = 0, so K = 1.

Teacher's Note: ΔG° = 0 corresponds to K = 1, not to equilibrium itself.

Exam Note: Distinguish ΔG° = 0 from ΔG = 0.

Question 53. The standard free energy change of a reaction is ΔG° = −115 kJ at 298 K. Calculate the equilibrium constant Kp in log Kp. (R = 8.314 J K-1 mol-1) (a) 20.16 (b) 2.303 (c) 2.016 (d) 13.83 (VITEEE 2008)

Solution. Answer: (a). log Kp = −ΔG°/(2.303RT) = −(−115 × 1000)/(2.303 × 8.314 × 298) = 20.16 (calculation gives 20.15).

Teacher's Note: Rearrange ΔG° = −2.303RT log Kp directly for log Kp.

Exam Note: Convert kJ to J before substituting.

Free Energy and Useful Work

Example 91. The emf of the cell reaction, Zn(s) + Cu2+(aq.) → Zn2+(aq.) + Cu(s) is 1.1 V. Calculate free energy change for the reaction. If enthalpy of the reaction is −216.7 kJ mol-1, calculate the entropy change for the reaction.

Solution. −ΔG° = nFE° = 2 × 96500 × 1.1 = 212.3 kJ, so ΔG° = −212.3 kJ mol-1. ΔG° = ΔH° − TΔS°, so ΔS° = (ΔH° − ΔG°)/T = (−216.7 − (−212.3))/298 = −0.01476 kJ K-1 mol-1 = −14.76 J K-1 mol-1 (more exactly −14.77).

Teacher's Note: Use ΔG° = −nFE° (n = 2 here), then ΔS° from ΔG° = ΔH° − TΔS°.

Exam Note: Count electrons n = 2; keep kJ and J consistent.

Example 92. Calculate equilibrium constant for the following reaction: Cu(s) + 2Ag+(aq.) ⇌ Cu2+(aq.) + 2Ag(s). At 25°C, E°cell = 0.47 volt, R = 8.314 J K-1 mol-1, F = 96500 coulomb.

Solution. At equilibrium E°cell = (0.0591/n) log Kc, so 0.47 = (0.0591/2) log Kc and Kc = antilog[(0.47 × 2)/0.0591] = 8.5 × 1015 (as printed). Corrected: 0.94/0.0591 = 15.905, so Kc = 8.0 × 1015.

Teacher's Note: Nernst relation at 25°C: log K = nE°/0.0591.

Exam Note: n = 2 for Cu/Ag+; K is very large.

Standard Entropy and Third Law

Example 93. Calculate ΔG° for the following reaction: CO(g) + ½O2(g) → CO2(g); ΔH° = −282.84 kJ. Given S°CO2 = 213.8 J K-1 mol-1, S°CO(g) = 197.9 J K-1 mol-1, S°O2 = 205.0 J K-1 mol-1.

Solution. ΔS° = ΣS°(products) − ΣS°(reactants) = S°(CO2) − [S°(CO) + ½S°(O2)] = 213.8 − [197.9 + ½ × 205] = −86.6 J K-1. ΔG° = ΔH° − TΔS° = −282.84 − 298 × (−86.6 × 10-3) = −282.84 + 25.807 = −257.033 kJ.

Teacher's Note: Compute ΔS° from absolute entropies, then apply ΔG° = ΔH° − TΔS°.

Exam Note: Half coefficient on O2; convert J to kJ.

Example 94. For the reaction A(s) → B(s) + C(s), calculate the entropy change at 298 K and 1 atm if absolute entropies (in J K-1 mol-1) are: A = 130, B = 203, C = 152.

Solution. ΔS° = ΣS°(products) − ΣS°(reactants) = [S°B + S°C] − [S°A] = [203 + 152] − [130] = 225 J K-1.

Teacher's Note: Products minus reactants of absolute entropies.

Exam Note: One reactant gives two products, so ΔS° is positive.

Carnot Cycle

Example 95. Calculate the maximum efficiency of an engine operating between 100°C and 25°C.

Solution. Efficiency = (T2 − T1)/T2. T2 = 100 + 273 = 373 K, T1 = 25 + 273 = 298 K. Efficiency = (373 − 298)/373 = 75/373 = 0.20 = 20%.

Teacher's Note: Carnot efficiency depends only on the two reservoir temperatures in kelvin.

Exam Note: Use kelvin, hot reservoir in denominator.

Example 96. Heat supplied to a Carnot engine is 453.6 kcal. How much useful work can be done by the engine which works between 10°C and 100°C?

Solution. T2 = 100 + 273 = 373 K; T1 = 10 + 273 = 283 K; q2 = 453.6 × 4.184 = 1897.86 kJ. w = q2(T2 − T1)/T2 = 1897.86 × (373 − 283)/373 = (1897.86 × 90)/373 = 457.92 kJ.

Teacher's Note: Work = efficiency × heat absorbed; convert kcal to kJ using 4.184.

Exam Note: Final unit kJ after converting kcal.

Illustrations of Objective Questions (Second Law)

Question 54. For which of the following reactions, the entropy change will be positive? (a) H2(g) + I2(g) ⇌ 2HI(g) (b) HCl(g) + NH3(g) ⇌ NH4Cl(s) (c) NH4NO3(s) ⇌ N2O(g) + 2H2O(g) (d) MgO(s) + H2(g) ⇌ Mg(s) + H2O(l) [JEE (WB) 2008]

Solution. Answer: (c). Δng = 3 − 0 = 3 > 0, so there is an increase in entropy.

Teacher's Note: Gas moles increase from zero to three: disorder rises.

Exam Note: Count gaseous moles on each side.

Question 55. If an endothermic reaction occurs spontaneously at constant temperature T and pressure P, then which of the following is true? (a) ΔG > 0 (b) ΔH < 0 (c) ΔS > 0 (d) ΔS < 0 (VITEEE 2008)

Solution. Answer: (c). For a spontaneous process ΔStotal = ΔSsystem + ΔSsurroundings > 0; since the surroundings lose heat, ΔSsystem must be positive.

Teacher's Note: Endothermic and spontaneous: only entropy gain of system can drive it.

Exam Note: ΔG < 0, ΔH > 0 and hence TΔS > ΔH.

Question 56. Which is the correct expression that relates changes of entropy with the change of pressure for an ideal gas at constant temperature? (a) ΔS = nRT ln(P2/P1) (b) ΔS = T(P2 − P1) (c) ΔS = nR ln(P1/P2) (d) ΔS = 2.303 nRT ln(P1/P2) [PET (MP) 2008]

Solution. Answer: (c). For an isothermal process ΔU = 0, so q = w = PdV, dS = q/T = PdV/T = nR dV/V. Integrating, ΔS = nR ln(V2/V1) = nR ln(P1/P2), since P1V1 = P2V2 (Boyle's law).

Teacher's Note: Entropy change at constant T has no extra T factor: ΔS = nR ln(P1/P2).

Exam Note: Entropy units are J K-1, so T must not appear.

Miscellaneous Numerical Examples

Example 1. Bond dissociation enthalpies of H2(g) and N2(g) are 436.0 kJ mol-1 and 941.8 kJ mol-1 and enthalpy of formation of NH3(g) is −46 kJ mol-1. What is enthalpy of atomization of NH3(g)? What is the average bond enthalpy of N–H bond?

Solution. N2(g) + 3H2(g) → 2NH3(g); ΔH = −2 × 46 kJ/mol. ΔH = Σ(BE)R − Σ(BE)P = (941.8 + 3 × 436) − (6x) = −2 × 46 (x = BE of N–H bond), so x = 390.3 kJ mol-1. NH3 → N + 3(H): heat of atomization = 3 × 390.3 = 1170.9 kJ mol-1.

Teacher's Note: Two NH3 contain six N–H bonds, so divide by 6, not 3.

Exam Note: Atomization enthalpy of NH3 is 3 × N–H bond enthalpy.

Example 2. Ethanol was oxidised to acetic acid in a catalyst chamber at 18°C. Calculate the rate of removal of heat to maintain the reaction chamber at 18°C when the feed rate of 30 kg per hour ethanol along with excess oxygen to the system at 18°C, given that a 42 mole per cent yield based on ethanol is obtained. Given that, ΔHf(H2O(l)) = −68.4 kcal mol-1, ΔHf(C2H5OH(l)) = −66 kcal mol-1, ΔHf(CH3COOH(l)) = −118 kcal mol-1.

Solution. C2H5OH + O2 → CH3COOH + H2O. ΔH = Σ(Hf)P − Σ(Hf)R = (−118 − 68.4) − (−66) = −120.4 kcal. Yield is 42%, so energy produced per hour = (120.4 × 42 × 30000)/(100 × 46) = 32979.13 kcal hour-1. This heat must be removed per hour.

Teacher's Note: Moles of ethanol per hour = 30000/46; only 42% reacts, so multiply by 0.42.

Exam Note: Convert kg to g; ethanol molar mass 46.

Example 3. The standard heat of formation listed for gaseous NH3 is −11.02 kcal/mol at 298 K. Given that at 298 K, the constant pressure heat capacities of gaseous N2, H2 and NH3 are respectively 6.96, 6.89, 8.38 cal/mol. Determine ΔH°298 K and ΔH773 K for the reaction ½N2(g) + (3/2)H2(g) → NH3(g).

Solution. ΔH298 K = Σ(Hf)P − Σ(Hf)R = (−11.02 − 0) = −11.02 kcal mol-1. Kirchhoff: (ΔH2 − ΔH1)/(T2 − T1) = ΔCP, so (ΔH2 − (−11.02))/(773 − 298) = (8.38 − ½ × 6.96 − (3/2) × 6.89) × 10-3, giving ΔH773 K = −13.6 kcal mol-1.

Teacher's Note: Kirchhoff's law: ΔH at new T = ΔH + ΔCP × ΔT.

Exam Note: ΔCP uses stoichiometric coefficients ½ and 3/2.

Example 4. The heat of combustion of glycogen is about 476 kJ/mol of carbon. Assume that average rate of heat loss by an adult male is 150 watt. If we were to assume that all the heat loss comes from oxidation of glycogen, how many units of glycogen (1 mole carbon per unit) must be oxidised per day to provide for this heat loss?

Solution. Total energy required in the day = (150 × 24 × 60 × 60)/1000 kJ (1 watt = J sec-1) = 12960 kJ. Units of glycogen required = 12960/476 = 27.22 units.

Teacher's Note: Power × time gives energy; divide by energy per unit of glycogen.

Exam Note: 1 watt = 1 J s-1; one day = 86400 s.

Example 5. At 25°C, the following heat of formations are given: SO2(g): ΔH°f = −296.81 kJ/mol; H2O(l): −285.83 kJ/mol. For the reactions at 25°C, 2H2S(g) + Fe(s) → FeS2(s) + 2H2(g); ΔH° = −137 kJ/mol and H2S(g) + (3/2)O2(g) → H2O(l) + SO2(g); ΔH° = −562 kJ/mol. Calculate heat of formation of H2S(g) and FeS2(s) at 25°C.

Solution. Let heat of formation of H2S = x kJ/mol and of FeS2 = y kJ/mol. From the first reaction: −137 = y − 2x ... (i). From the second: −562 = −285.83 − 296.81 − x ... (ii), so x = −20.64 kJ mol-1. From (i): y = 2x − 137 = 2(−20.64) − 137 = −178.28 kJ mol-1. Hence ΔHf(H2S) = −20.64 kJ/mol and ΔHf(FeS2) ≈ −178 kJ/mol. (The book writes +20.64 kJ/mol in the last line; the working gives −20.64.) Corrected: sign of ΔHf(H2S) is −20.64 kJ/mol.

Teacher's Note: Solve the second equation for H2S first, then use it in the first.

Exam Note: Elements (H2, Fe, O2) have zero formation enthalpy.

Example 6. The "heat of total cracking" of hydrocarbons ΔHTC is defined as ΔH at 298.15 K and 101.325 kPa for the process: CnHm + (2n − m/2)H2(g) → nCH4(g). Given that, ΔHTC is −65.2 kJ for C2H6 and −87.4 kJ for C3H8, calculate ΔH for CH4(g) + C3H8(g) → 2C2H6(g).

Solution. ΔHTC of CH4 = 0. For CH4(g) + C3H8(g) → 2C2H6(g): ΔH = 2ΔHTC(C2H6) − ΔHTC(C3H8) = 2(−65.2) − (−87.4) = −43 kJ.

Teacher's Note: Hess's law: cracking enthalpies act like formation enthalpies relative to CH4.

Exam Note: Use ΔHTC(CH4) = 0 as reference.

Example 7. A constant pressure calorimeter consists of an insulated beaker of mass 92 g made up of glass with heat capacity 0.75 J K-1 g-1. The beaker contains 100 mL of 1 M HCl at 22.6°C to which 100 mL of 1 M NaOH at 23.4°C is added. The final temperature after the reaction is complete is 29.3°C. What is ΔH per mole for this neutralization reaction? Assume that the heat capacities of all solutions are equal to that of same volumes of water.

Solution. Initial average temperature of the acid and base = (22.6 + 23.4)/2 = 23.0°C. Rise in temperature = 29.3 − 23.0 = 6.3°C. Total heat produced = (92 × 0.75 + 200 × 4.184) × 6.3 = 905.8 × 6.3 = 5706.54 J. Moles of acid (and base) = 0.1, so enthalpy of neutralization = −(5706.54/100) × 1000 × 1 = −57065.4 J = −57 kJ per mole.

Teacher's Note: Heat absorbed by water and glass, divided by 0.1 mol, gives ΔH per mole.

Exam Note: Include the beaker heat capacity; sign is negative.

Example 8. C2H4 + Cl2 → C2H4Cl2; ΔH = −270.6 kJ mol-1, ΔS = −139 J K-1. (i) Is the reaction favoured by entropy, enthalpy, both or none? (ii) Find ΔG if T = 300 K. [CBSE (Mains) 2005]

Solution. (i) Since ΔH = −ve, the reaction is exothermic and it will be spontaneous in terms of enthalpy; ΔS is negative, so entropy does not favour it. (ii) ΔG = ΔH − TΔS = −270.6 × 1000 − 300 × (−139) = −228900 J = −228.9 kJ.

Teacher's Note: Exothermic gives favourable ΔH; negative ΔS opposes the reaction.

Exam Note: Convert kJ to J before using ΔS in J K-1.

Example 9. Find bond enthalpy of S–S bond from the following data: C2H5–S–C2H5(g); ΔH°f = −147.2 kJ mol-1. C2H5–S–S–C2H5(g); ΔH°f = −201.9 kJ mol-1. S(g); ΔH°f = 222.8 kJ mol-1.

Solution. ΔH = Σ(BE)R − Σ(BE)P. (i) −147.2 = heat of atomization of 4C, 10H, 1S − BE of [10(C–H), 2(C–S), 2(C–C)]. (ii) −201.9 = heat of atomization of 4C, 10H, 2S − BE of [10(C–H), 2(C–S), 2(C–C), (S–S)]. Subtracting (i) from (ii): −201.9 + 147.2 = 222.8 kJ − BE of (S–S), so BE of (S–S) = 277.5 kJ.

Teacher's Note: Subtracting the two formation equations isolates one S atom and one S–S bond.

Exam Note: Atomization of S(g) is 222.8 kJ per S atom.

Example 10. A natural gas may be assumed to be a mixture of methane and ethane only. On complete combustion of 10 litre of gas at STP, the heat evolved was 474.6 kJ. Assuming ΔHcomb CH4(g) = −894 kJ mol-1 and ΔHcomb C2H6 = −1500 kJ. Calculate the percentage composition of the mixture by volume.

Solution. Let x litre be CH4; moles of CH4 = x/22.4. (10 − x) litre is C2H6; moles = (10 − x)/22.4. Heat evolved = (x/22.4) × 894 + ((10 − x)/22.4) × 1500 = 474.6. The book then states x = 0.745, % CH4 = 74.5%. Corrected: 894x + 15000 − 1500x = 474.6 × 22.4 = 10631.04, so 606x = 4368.96 and x = 7.21 L. Composition: CH4 = 72.1% and C2H6 = 27.9% by volume.

Teacher's Note: Set up one linear equation in x litres from total heat; moles = volume/22.4 at STP.

Exam Note: Check answer by recomputing total heat evolved.

Example 11. From the data at 25°C: Fe2O3(s) + 3C(graphite) → 2Fe(s) + 3CO(g); ΔH° = 492.6 kJ/mol; FeO(s) + C(graphite) → Fe(s) + CO(g); ΔH° = 155.8 kJ/mol; C(graphite) + O2(g) → CO2(g); ΔH° = −393.51 kJ/mol; CO(g) + ½O2(g) → CO2(g); ΔH° = −282.98 kJ/mol. Calculate standard heat of formation of FeO(s) and Fe2O3(s).

Solution. Reverse the second equation: Fe(s) + CO(g) → FeO(s) + C(graphite); ΔH° = −155.8 kJ/mol (the scan prints this as −158.88, which is a misprint). C(graphite) + O2(g) → CO2(g); ΔH° = −393.51 kJ/mol. CO2(g) → CO(g) + ½O2(g); ΔH° = +282.98 kJ/mol. Adding: Fe(s) + ½O2(g) → FeO(s); ΔHf = −266.3 kJ/mol. For Fe2O3 (the book only says "similarly"): ΔHf(CO) = −393.51 + 282.98 = −110.53 kJ/mol, so ΔHf(Fe2O3) = 3 × (−110.53) − 492.6 = −824.2 kJ/mol (worked out here, not printed in the book).

Teacher's Note: Combine equations by Hess's law to reach formation from elements.

Exam Note: Reversing a reaction flips the sign of ΔH.

Example 12. Calculate the ΔH at 85°C for the reaction: Fe2O3(s) + 3H2(g) → 2Fe(s) + 3H2O(l). The data are: ΔH°298 = −33.29 kJ/mol and CP (J/K mol): Fe2O3(s) 103.8, Fe(s) 25.1, H2O(l) 75.3, H2(g) 28.8.

Solution. ΔCP = (CP)P − (CP)R = (2 × 25.1 + 3 × 75.3) − (103.8 + 3 × 28.8) = 276.1 − 190.2 = 85.9 J. (ΔHT2 − ΔHT1)/(T2 − T1) = ΔCP: (ΔH358 − (−33.29))/(358 − 298) = 85.9 × 10-3, so ΔH358 = −28.14 kJ/mol.

Teacher's Note: Kirchhoff's equation shifts ΔH with temperature through ΔCP.

Exam Note: Convert ΔCP to kJ; 85°C is 358 K.

Example 13. The standard heats of formation at 298 K for CCl4(g), H2O(g), CO2(g) and HCl(g) are −25.5, −57.8, −94.1 and −22.1 kcal mol-1 respectively, calculate ΔH°298 K for the reaction: CCl4(g) + 2H2O(g) → CO2(g) + 4HCl(g). [BCECE (Mains) 2005]

Solution. ΔHreaction = Σ heat of formation of products − Σ heat of formation of reactants = [ΔHf(CO2) + 4ΔHf(HCl)] − [ΔHf(CCl4) + 2ΔHf(H2O)] = [−94.1 + 4 × (−22.1)] − [−25.5 + 2 × (−57.8)] = −41.4 kcal.

Teacher's Note: Products minus reactants of formation enthalpies, with coefficients.

Exam Note: Four HCl and two H2O: watch multipliers.

Example 14. Calculate Q, W, ΔE and ΔH for the isothermal reversible expansion of 1 mole of an ideal gas from an initial pressure of 1.0 bar to a final pressure of 0.1 bar at a constant temperature of 273 K. (IIT 2000)

Solution. In an isothermal process temperature remains constant, so both ΔE and ΔH are zero. ΔE = 0; ΔH = 0. By the first law, ΔE = W + Q, so 0 = W + Q and Q = −W. |W| = 2.303 nRT log(P1/P2) = 2.303 × 1 × 8.314 × 273 × log(1/0.1) = 5227.169 J = 5.227 kJ. The gas expands, so it absorbs heat and does work: Q = +5.227 kJ, W = −5.227 kJ (work done by the system, convention ΔE = Q + W). (The book writes the intermediate step with a stray sign; the final magnitude 5227.169 J is as printed.)

Teacher's Note: Ideal gas isothermal: ΔU = ΔH = 0, so heat absorbed equals work done.

Exam Note: Pressure ratio 10 gives log = 1; state signs clearly.

Example 15. A sample of argon at 1 atm pressure and 27°C expands reversibly and adiabatically from 1.25 dm3 to 2.50 dm3. Calculate the enthalpy change in this process. Cv,m for argon is 12.48 J K-1 mol-1. (IIT 2000)

Solution. Number of moles of argon = PV/RT = (1.25 × 1)/(0.0821 × 300) = 0.05075. For adiabatic expansion, T1/T2 = (V2/V1)γ−1: 300/T2 = (2.50/1.25)1.66−1, T2 = 188.55 K (as printed; exact evaluation gives about 189 K). CP = CV + R = 12.48 + 8.314 = 20.794 J K-1 mol-1. ΔH = n × CP × ΔT = 0.05075 × 20.794 × (188.55 − 300) = −117.6 J. (The book prints +117.6 J.) Corrected: the sign of ΔH is negative, since the gas cools in adiabatic expansion.

Teacher's Note: ΔH = nCPΔT with ΔT = T2 − T1; gas cools on adiabatic expansion.

Exam Note: ΔT is negative, so ΔH is negative.

Example 16. Show that the reaction CO(g) + ½O2(g) → CO2(g) at 300 K is spontaneous and exothermic, when the standard entropy change is −0.094 kJ mol-1 K-1. The standard Gibbs free energies of formation for CO2 and CO are −394.4 and −137.2 kJ mol-1 respectively. (IIT 2000)

Solution. ΔG° (for reaction) = G°CO2 − G°CO − ½G°O2 = −394.4 − (−137.2) − 0 = −257.2 kJ mol-1. ΔG° = ΔH° − TΔS°: −257.2 = ΔH° − 298 × (−0.094), so ΔH° = −257.2 − 28.0 = −285.2 kJ (the book prints −288.2). Corrected: ΔH° = −285.2 kJ. ΔG° is negative, hence the process is spontaneous, and ΔH° is also negative, hence the process is also exothermic.

Teacher's Note: Spontaneous means ΔG° < 0; exothermic means ΔH° < 0.

Exam Note: Substitute ΔS° with its negative sign: TΔS° = −28 kJ.

Example 17. Diborane is a potential rocket fuel which undergoes combustion according to the reaction, B2H6(g) + 3O2(g) → B2O3(s) + 3H2O(g). From the following data, calculate the enthalpy change for the combustion of diborane: 2B(s) + (3/2)O2(g) → B2O3(s); ΔH = −1273 kJ mol-1 ... (i); H2(g) + ½O2(g) → H2O(l); ΔH = −286 kJ mol-1 ... (ii); H2O(l) → H2O(g); ΔH = 44 kJ mol-1 ... (iii); 2B(s) + 3H2(g) → B2H6(g); ΔH = 36 kJ mol-1 ... (iv). (IIT 2000)

Solution. The required equation is obtained from eq. (i) + 3 eq. (ii) + 3 eq. (iii) − eq. (iv): ΔH = −1273 − 858 + 132 − 36 = −2035 kJ mol-1, i.e. enthalpy of combustion of diborane is −2035 kJ mol-1.

Teacher's Note: Multiply (ii) and (iii) by 3 and reverse (iv) to cancel B and intermediates.

Exam Note: Show the combination of equations explicitly for method marks.

Example 18. An insulated container contains 1 mole of a liquid, molar volume 100 mL at 1 bar. When liquid is steeply passed to 100 bar, volume decreases to 99 mL. Find ΔH and ΔU for the process. [IIT 2004 (Memory based)]

Solution. From the first law: ΔU = q + W; insulated so q = 0 and W = −PΔV. ΔU = q + PΔU = 0 + {−100(99 − 100)} = 100 bar mL. ΔH = ΔU + (P2V2 − P1V1) = 100 + (100 × 99 − 1 × 100) = 9900 bar mL (1 bar mL = 0.1 J, so ΔU = 10 J and ΔH = 990 J).

Teacher's Note: Insulated: q = 0; work done on the liquid is Pext × decrease in volume.

Exam Note: Track both P and V in ΔH.

Example 19. In the following equilibrium: N2O4(g) ⇌ 2NO2(g) when 5 mole of each are taken and temperature is kept at 298 K, the total pressure was found to be 20 bar. Given: ΔG°f N2O4 = 100 kJ, ΔG°f NO2 = 50 kJ. (i) Find ΔG of the reaction at 298 K. (ii) Find the direction of the reaction. [IIT 2004 (Memory based)]

Solution. Since the number of moles of both N2O4 and NO2 are the same, their partial pressures are the same: pN2O4 = pNO2 = 20/2 = 10 bar. QP = (pNO2)2/pN2O4 = 102/10 = 10 bar. ΔG°reaction = 2ΔG°f(NO2) − ΔG°f(N2O4) = 2 × 50 − 100 = 0. ΔG = ΔG° + 2.303RT log Q = 0 + 2.303 × 8.314 × 298 × log 10 = +5705 J (the book prints the sign as −5705 J, which is a misprint, because ΔG = ΔG° + RT ln Q). Corrected: ΔG = +5705 J (+5.7 kJ), so the reaction is non-spontaneous in the forward direction; it proceeds in the backward direction (towards N2O4), since Q = 10 is greater than K = 1.

Teacher's Note: ΔG° = 0 means K = 1; Q = 10 exceeds K, so the reaction goes backward.

Exam Note: ΔG = ΔG° + RT ln Q; Q > K.

Example 20. When 1-pentyne (A) is treated with 4N alcoholic KOH at 175°C, it is slowly converted into an equilibrium mixture of 1.3% of 1-pentyne (A), 95.2% 2-pentyne (B) and 3.5% of 1,2-pentadiene (C). The equilibrium was maintained at 175°C. Calculate ΔG° for the following equilibria: B ⇌ A; ΔG°1 = ? and B ⇌ C; ΔG°2 = ? From the calculated value of ΔG°1 and ΔG°2 indicate the order of stability of (A), (B) and (C). Write a reasonable reaction mechanism showing all intermediates leading to (A), (B) and (C). (IIT 2001)

Solution. Pentyne-1 ⇌ Pentyne-2 + 1,2-pentadiene: at equilibrium (A) 1.3, (B) 95.2, (C) 3.5. Keq = [B][C]/[A] = (95.2 × 3.5)/1.3 = 256.31 (as printed; the individual equilibria are B ⇌ A with K1 = [A]/[B] and B ⇌ C with K2 = [C]/[B]). For B ⇌ A: K1 = [A]/[B] = 1.3/95.2 ≈ 0.0137 (book: 0.013); ΔG°1 = −2.303RT log K1 = −2.303 × 8.314 × 448 × log 0.013 = 16178 J = 16.178 kJ (about 16.0 kJ with K1 = 0.0137). For B ⇌ C: K2 = [C]/[B] = 3.5/95.2 = 0.037; ΔG°2 = −2.303 × 8.314 × 448 × log 0.037 = 12282 J = 12.282 kJ. Both are positive, so B is the most stable: order of stability B > C > A. Mechanism (the book gives only the numbers; this is a standard summary): OH− removes a propargylic H from HC≡C–CH2CH2CH3 (A), giving a carbanion that is protonated at the terminal carbon to form the allene CH2=C=CH–CH2CH3 (C); OH− then removes the allenic H on C-3, and protonation at C-1 gives CH3–C≡C–CH2CH3 (B).

Teacher's Note: ΔG° = −RT ln K for each step from B; positive values place B lowest in energy.

Exam Note: T = 448 K; order B > C > A.

Example 21. Two moles of a perfect gas undergo the following process: (a) A reversible isobaric expansion from (1 atm, 20 L) to (1 atm, 40 L). (b) A reversible isochoric change of state from (1 atm, 40 L) to (0.5 atm, 40 L). (c) A reversible isothermal compression from (0.5 atm, 40 L) to (1 atm, 20 L). (i) Sketch with labels each of the process on the same P-V diagram. (ii) Calculate the total work (W) and the total heat change (q) involved in the above process. (iii) What will be the value of ΔU, ΔH and ΔS for the overall process? (IIT 2002)

Solution.

Volume (L) →P (atm)ABC1 atm0.5 atm20 L40 LAB isobaricBC isochoricCA isothermal
AB: isobaric process; BC: isochoric process; CA: isothermal compression. Total work = WAB + WBC + WCA = −P × ΔV + 0 + 2.303 nRT log(V2/V1) = −1 × 20 × 101.3 + 0 + 2.303 × 2 × 8.314 × T log(40/20) ... (1). PV = nRT (at A): 1 × 20 = 2 × 0.0821 × T, T = 20/(2 × 0.0821) = 121.8 K. From (1): total work = −2026 + 2.303 × 2 × 8.314 × 121.8 × log 2 = −622.06 J. So W = −622.06 J (net work done by the system; using the convention ΔU = q + W, q = +622.06 J, i.e. the book's "W = q" is only a magnitude statement). In a cyclic process: ΔU = 0, ΔH = 0 and ΔS = 0.

Teacher's Note: State functions return to start in a cycle: ΔU, ΔH, ΔS vanish; work equals net heat.

Exam Note: Isochoric step does no work; add isobaric and isothermal work.

Questions: Matrix-Matching Problems (For IIT Aspirants)

Matrix [A]. Match the List-I with List-II. List-I: (a) ΔSsystem > 0 (isolated system); (b) ΔG < 0; (c) ΔSTotal = 0; (d) (ΔG)T,P > 0. List-II: (p) Spontaneous; (q) Non-spontaneous photochemical reaction; (r) Equilibrium; (s) Non-spontaneous.

Solution. Answer (from key): (a)–(p); (b)–(p, q); (c)–(r); (d)–(s).

Teacher's Note: Spontaneity criteria: ΔSisolated > 0, ΔG < 0, ΔStotal = 0 equilibrium.

Exam Note: Link each sign condition to spontaneous, equilibrium or non-spontaneous.

Matrix [B]. Match the Column-I with Column-II. Column-I: (a) Isothermal process (reversible); (b) Adiabatic process; (c) W = nR(T2 − T1)/(γ − 1); (d) Irreversible isothermal process. Column-II: (p) W = 2.303 nRT log(P1/P2); (q) PVγ = constant; (r) W = 2.303 nRT log(V2/V1); (s) W = −Pext(V2 − V1).

Solution. Answer (from key): (a)–(p, r); (b)–(q); (c)–(q); (d)–(s).

Teacher's Note: Reversible isothermal work has equivalent volume and pressure forms.

Exam Note: Adiabatic formulas carry γ.

Matrix [C]. Match the physical properties in List-I with their relations in List-II. List-I: (a) ΔG; (b) ΔG°; (c) W or Wmax; (d) ΔS°. List-II: (p) −nFE or −nFE°; (q) ΔH − TΔS; (r) −RT loge K; (s) 2.303 nR log10(V2/V1).

Solution. Answer (from key): (a)–(p, q); (b)–(p, r); (c)–(p); (d)–(s).

Teacher's Note: Gibbs energy links to cell emf, enthalpy-entropy and equilibrium constant.

Exam Note: Distinguish ΔG from ΔG° when choosing relations.

Matrix [D]. Match the Column-I with Column-II. Column-I (gas): (a) O2; (b) N2; (c) CO2, CH4; (d) 1 mol O2 + 2 mol O3. Column-II (thermodynamic property): (p) γ = 1.4; (q) CP = (7/2)R; (r) (23/6)R; (s) γ = 1.33. Here CP = heat capacity at constant pressure, γ = CP/CV.

Solution. Answer (from key): (a)–(p, q); (b)–(p, q); (c)–(s); (d)–(r).

Teacher's Note: Diatomic gases: γ = 1.4; polyatomic non-linear: γ = 1.33.

Exam Note: Mixture CP = (23/6)R from mole-weighted CV plus R.

Matrix [E]. Match the reactions in Column-I with relations of Column-II. Column-I: (a) H2(g) + Cl2(g) → 2HCl(g); (b) N2(g) + O2(g) ⇌ 2NO(g); (c) H2(g) + I2(g) ⇌ 2HI(g); (d) N2(g) + 3H2(g) ⇌ 2NH3(g). Column-II: (p) ΔH = ΔU + RT; (q) ΔH = ΔU; (r) ΔH = ΔU − 2RT; (s) Forward shift by increasing pressure.

Solution. Answer (from key): (a)–(q); (b)–(q); (c)–(q); (d)–(r, s). The printed key gives (c)–(p), but with I2 as a gas as printed, Δng = 0 so ΔH = ΔU. Corrected: (c)–(q) (the key's (p) would hold only if I2 were solid).

Teacher's Note: ΔH = ΔU + ΔngRT: count gaseous moles on each side.

Exam Note: Δng = −2 for ammonia synthesis.

Matrix [F]. Match the processes of Column-I with entropy or enthalpy changes in Column-II. Column-I: (a) N2(g) + O2(g) → 2NO(g); (b) 2KI(aq.) + HgI2(aq.) → K2[HgI4](aq.); (c) PCl3(g) + Cl2(g) → PCl5(g); (d) NH3(g) + HCl(g) → NH4Cl(s). Column-II: (p) ΔS = 0; (q) ΔS < 0; (r) ΔH > 0; (s) ΔH < 0.

Solution. Answer (from key): (a)–(p, r); (b)–(q, s); (c)–(q, s); (d)–(q, s). The printed key gives (c)–(q, r), but PCl3 + Cl2 → PCl5 is exothermic (ΔH < 0). Corrected: (c)–(q, s).

Teacher's Note: Fewer gas moles gives ΔS < 0; bond-forming additions are exothermic.

Exam Note: Δng = 0 for NO formation: ΔS approximately 0.

Matrix [G]. Match the List-I with List-II. List-I (reaction): (a) C(s) + ½O2(g) → CO(g); (b) CO(g) + ½O2(g) → CO2(g); (c) NaOH(aq.) + HCl(aq.) → NaCl(aq.) + H2O; (d) H2(g) + ½O2(g) → H2O(l). List-II (process): (p) Combustion; (q) Neutralisation; (r) Process of formation; (s) Reaction of Apollo fuel cell.

Solution. Answer (from key): (a)–(p, r); (b)–(p); (c)–(q); (d)–(p, r, s).

Teacher's Note: A reaction can be both formation and combustion if one reactant is O2 and product from elements.

Exam Note: H2 + O2 is the Apollo fuel cell reaction.

Matrix [H]. Match the relations of Column-I with their names in Column-II. Column-I: (a) (ΔH2 − ΔH1)/(T2 − T1) = ΔCP; (b) (ΔU2 − ΔU1)/(T2 − T1) = ΔCV; (c) ΔHfusion/Tmp = ΔSfusion; (d) limT→0 K S → 0. Column-II: (p) Trouton equation; (q) Effect of temperature on the heat of reaction; (r) Kirchhoff's equation; (s) Third law of thermodynamics.

Solution. Answer (from key): (a)–(q, r); (b)–(q, r); (c)–(p); (d)–(s).

Teacher's Note: Kirchhoff's equations give temperature dependence of heats of reaction.

Exam Note: Entropy-of-transition relation is grouped with Trouton in the key.

Matrix [I]. Match the Column-I with Column-II. Column-I: (a) Amount of heat required to raise the temperature of 1 mol substance by 1°C; (b) ΔH/ΔT or ΔU/ΔT; (c) Heat evolved in the combustion of 1 g of a substance; (d) Heat evolved when an extra electron is added to valence shell of an isolated gaseous atom. Column-II: (p) Specific heat × molar mass; (q) Heat capacity = C, CP or CV; (r) Electron gain enthalpy; (s) Calorific value.

Solution. Answer (from key): (a)–(p, q); (b)–(p, q); (c)–(s); (d)–(r).

Teacher's Note: Molar heat capacity equals specific heat times molar mass.

Exam Note: Calorific value is per gram of fuel.

Matrix [J]. Match the Column-I with Column-II. Column-I: (a) ΔH = +ve, ΔS = +ve; (b) ΔH = −ve, ΔS = +ve; (c) ΔH = +ve, ΔS = −ve; (d) ΔH = −ve, ΔS = −ve. Column-II: (p) Spontaneous at all temperature; (q) Non-spontaneous at all temperature; (r) Non-spontaneous at high temperature; (s) Spontaneous at high temperature.

Solution. Answer (from key): (a)–(s); (b)–(p); (c)–(q); (d)–(r).

Teacher's Note: Apply ΔG = ΔH − TΔS to each sign pair.

Exam Note: Same signs make T the deciding factor.

Practice Problems

Practice Problem 2. Which of the following are state functions? (i) Q (ii) W (iii) Q + W (iv) Q − W (v) QV (vi) QP (vii) Q/W (viii) Q/T (ix) ΔH/T (x) E + PV (xi) E − PV

Solution. Answer: (iv), (v), (vi), (viii), (ix), (x). Q − W equals ΔE (first law, work-done-by-system convention); QV = ΔE and QP = ΔH at constant volume and pressure; Q/T (reversible) is ΔS; ΔH/T is a ratio of state-function change to T; E + PV = H.

Teacher's Note: Heat and work are path functions; combinations equal to ΔE, ΔH, ΔS depend only on states.

Exam Note: QV and QP are state functions only under stated conditions.

Practice Problem 3. In the adjoining diagram, the P–V graph of an ideal gas is shown (rectangle ABCD: A at 2 L and 15 × 105 N m-2, B at 6 L and 15 × 105, C at 6 L and 6 × 105, D at 2 L and 6 × 105; arrows A→B, B→C, C→D, D→A). Find out from the graph (i) work done in taking the gas from the state A → B (ii) work done in taking the gas from B → C (iii) work done in a complete cycle. (1 litre = 10-3 m3)

Solution.

ABCD15626V (litre) →P (10⁵ N/m²)
Answer: (i) A → B: W = −PΔV = −(15 × 105 N m-2) × (4 × 10-3 m3) = −60 × 102 J (work done by the gas). (ii) B → C is isochoric (ΔV = 0), so W = zero. (iii) C → D: W = −(6 × 105)(−4 × 10-3) = +24 × 102 J; D → A: zero. Cycle total = −60 × 102 + 24 × 102 = −36 × 102 J, i.e. net work of 36 × 102 J is done by the gas.

Teacher's Note: Work is area under the P–V path; isochoric legs contribute nothing; cycle work equals enclosed area.

Exam Note: Express pressure in N m-2 and volume in m3 to get joules.

Practice Problem 4. A sample of a gas contracts 200 cm3 by an average of 0.5 atmosphere while 8.5 J heat flows out into the surroundings. What is the change in energy of the system? (1 litre-atm = 101.3 J)

Solution. Answer: Energy of the system increases by 1.63 J. Work done on the gas = PΔV = 0.5 atm × 0.200 L = 0.1 L atm = 10.13 J. q = −8.5 J. ΔE = q + w = −8.5 + 10.13 = +1.63 J.

Teacher's Note: Contraction means surroundings do work on the system: w positive.

Exam Note: Heat out is negative; combine with work done on gas.

Practice Problem 5. Calculate the pressure-volume work done by the system when the gas expands from 1.0 litre to 2.0 litre against a constant external pressure of 10 atmospheres. Express the answer in calorie and joule.

Solution. Answer: −10 litre-atm, −242.2 cal, −1013.28 J. w = −PextΔV = −10 × (2.0 − 1.0) = −10 L atm = −10 × 101.328 = −1013.28 J = −1013.28/4.184 = −242.2 cal.

Teacher's Note: Irreversible expansion against constant pressure: w = −PextΔV.

Exam Note: 1 L atm = 101.3 J = 24.2 cal.

Practice Problem 6. A sample of a gas in a cylinder contracts by 7.5 litre at a constant pressure of 5.0 atmosphere. How much work is done on the gas by the surroundings?

Solution. Answer: 37.5 litre-atm or 3801.75 J. w = −PΔV = −5.0 × (−7.5) = +37.5 L atm = 37.5 × 101.38 = 3801.75 J.

Teacher's Note: Contraction: surroundings do positive work on the gas.

Exam Note: Multiply L atm by 101.3 to get joules.

Practice Problem 7. A sample of a gas expands from 200 cm3 to 500 cm3 against an average pressure of 750 torr while 1.5 J heat flows into the system. What is the change in energy of the system? (1 litre-atm = 101.3 J)

Solution. Answer: Energy of the system is decreased by 28.5 J; ΔE = −28.5 J. P = 750/760 = 0.987 atm; ΔV = 0.300 L; w = −PΔV = −0.296 L atm = −30.0 J. q = +1.5 J. ΔE = q + w = 1.5 − 30.0 = −28.5 J.

Teacher's Note: Convert torr to atm; heat in is positive, expansion work is negative.

Exam Note: Final energy change is the algebraic sum of q and w.

Practice Problem 8. Calculate the work done when 65.38 g of zinc dissolves in hydrochloric acid in an open beaker at 300 K. (At. mass of Zn = 65.38)

Solution. Answer: −2494.2 J, i.e. work is done by the system. Zn + 2HCl → ZnCl2 + H2: 1 mol Zn gives 1 mol H2 gas, Δng = 1. w = −ΔngRT = −1 × 8.314 × 300 = −2494.2 J.

Teacher's Note: Only the H2 gas produced pushes back the atmosphere in an open beaker.

Exam Note: Use w = −ΔngRT.

Practice Problem 9. 6 moles of an ideal gas expand isothermally and reversibly from a volume of 1 dm3 to a volume of 10 dm3 at 27°C. What is the maximum work done? Express your answer in joule.

Solution. Answer: −34464.8 J, work is done by the system. w = −2.303 nRT log(V2/V1) = −2.303 × 6 × 8.314 × 300 × log 10 = −34464.8 J.

Teacher's Note: Reversible isothermal expansion gives maximum work.

Exam Note: Log of ratio 10 equals 1; T = 300 K.

Practice Problem 10. 1 mole of an ideal gas at 25°C is allowed to expand reversibly at constant temperature from a volume of 10 litre to 20 litre. Calculate the work done by the gas in joule and calorie.

Solution. Answer: −1717.46 J or −411 cal, i.e. work is done by the gas. w = −2.303 × 1 × 8.314 × 298 × log 2 = −1717.46 J = −1717.46/4.184 = −410.5 cal ≈ −411 cal.

Teacher's Note: Same isothermal formula; convert J to cal by dividing by 4.184.

Exam Note: T = 298 K; log 2 = 0.301.

Practice Problem 11. Find the work done when 1 mole of the gas is expanded reversibly and isothermally from 5 atm to 1 atm at 25°C.

Solution. Answer: −3984 J (book value). w = −2.303 nRT log(P1/P2) = −2.303 × 1 × 8.314 × 298 × log 5 = −3988 J with R = 8.314 (−3986 J with R = 8.31); the printed −3984 J differs only by rounding.

Teacher's Note: Pressure ratio replaces volume ratio in isothermal work.

Exam Note: Expansion: work done by gas is negative.

Practice Problem 12. How much energy is absorbed by 10 moles of an ideal gas if it expands from an initial pressure of 8 atmosphere to 4 atmosphere at a constant temperature of 27°C? (R = 8.31 J mol-1 K-1)

Solution. Answer: 1.728 × 104 J. In an isothermal process ΔE = 0, so q (heat absorbed) = −w. q = 2.303 nRT log(P1/P2) = 2.303 × 10 × 8.31 × 300 × log 2 = 1.728 × 104 J.

Teacher's Note: ΔE = 0 isothermally, so heat absorbed equals work done by gas.

Exam Note: Pressure halves, log 2 = 0.301.

Practice Problem 13. A given mass of a gas at 0°C is compressed reversibly (adiabatically) to a pressure 20 times the initial value. Calculate the final temperature of the gas. (CP/CV = 1.42)

Solution. Answer: T2 = 662.2 K. For adiabatic change (T1/T2)γ = (P2/P1)1−γ, so T2 = T1(P2/P1)(γ−1)/γ = 273 × 200.42/1.42 = 273 × 2.426 = 662.2 K.

Teacher's Note: Use T–P adiabatic relation with exponent (γ − 1)/γ.

Exam Note: Convert 0°C to 273 K first.

Practice Problem 14. 3 moles of hydrogen are compressed isothermally and reversibly from 60 dm3 to 20 dm3 and 8.22 kJ of work is done on it. Assuming ideal behaviour, calculate the temperature of the gas.

Solution. Answer: 300 K. w = 2.303 nRT log(V1/V2): 8220 = 2.303 × 3 × 8.314 × T × log 3, so T = 8220/(57.44 × 0.4771) = 300 K.

Teacher's Note: Solve the isothermal work formula for T.

Exam Note: Convert 8.22 kJ to J.

Practice Problem 15. To what pressure must a certain ideal gas (γ = 1.4) at 373 K and 1 atmospheric pressure be compressed adiabatically in order to raise its temperature to 773 K?

Solution. Answer (book): 7.89 atm. Corrected: P2/P1 = (T2/T1)γ/(γ−1) = (773/373)1.4/0.4 = (2.072)3.5 = 12.8, so P2 ≈ 12.8 atm.

Teacher's Note: Adiabatic: P ∝ Tγ/(γ−1); exponent is 3.5 for γ = 1.4.

Exam Note: Check exponent: γ/(γ−1), not (γ−1)/γ.

Practice Problem 16. 1 mole of an ideal gas (CV = 12.55 J K-1 mol-1) at 300 K is compressed adiabatically and reversibly to one-fourth of its original volume. What is the final temperature of the gas?

Solution. Answer: 752 K. CP = CV + R = 12.55 + 8.314 = 20.86; γ = 1.6625. T2 = T1(V1/V2)γ−1 = 300 × 40.6625 = 300 × 2.505 = 751.5 K ≈ 752 K.

Teacher's Note: Get γ from CV + R, then use TVγ−1 = constant.

Exam Note: Volume ratio is 4 for compression to one-fourth.

Practice Problem 17. Calculate q, w, ΔE and ΔH for the reversible isothermal expansion of 1 mole of an ideal gas at 27°C from a volume of 10 dm3 to a volume of 20 dm3.

Solution. Answer: q = −w = 1729 J. ΔE = 0 and ΔH = 0 (isothermal, ideal gas). q = 2.303 × 1 × 8.314 × 300 × log 2 = 1729 J, w = −1729 J.

Teacher's Note: Ideal gas isothermal: ΔE = ΔH = 0, so q = −w.

Exam Note: Quote all four quantities: q, w, ΔE, ΔH.

Practice Problem 18. Calculate the internal energy change for the process in which 1.0 kcal of heat is added to 1.2 litre of O2 gas in a cylinder at constant pressure of 1.0 atm and the volume changes to 1.5 litre.

Solution. Answer: 0.993 kcal. ΔE = q − PΔV = 1000 cal − (1.0 atm × 0.3 L) = 1000 − 0.3 × 24.2 cal = 1000 − 7.26 = 992.7 cal ≈ 0.993 kcal.

Teacher's Note: First law: ΔE = q − PΔV; work term is small compared with heat.

Exam Note: 1 L atm = 24.2 cal converts the work term.

Practice Problem 19. Calculate ΔE and ΔH when 10 dm3 of helium at NTP is heated to 100°C, assuming that the gas behaves ideally. (CV = (3/2)R)

Solution. Answer: ΔE = 556.74 J; ΔH = 927.9 J. n = 10/22.4 mol. ΔE = nCVΔT = (10/22.4) × (3/2) × 8.314 × 100 = 556.74 J. ΔH = nCPΔT = (10/22.4) × (5/2) × 8.314 × 100 = 927.9 J.

Teacher's Note: ΔE depends on CV, ΔH on CP = CV + R.

Exam Note: ΔT = 100 K (0°C to 100°C).

Practice Problem 20. For the conversion of 1 mole of SO2(g) into SO3(g) the enthalpy of reaction at constant volume, ΔE, at 298 K is −97.027 kJ. Calculate the enthalpy of reaction, ΔH, at constant pressure.

Solution. Answer: ΔH = −98.267 kJ. SO2(g) + ½O2(g) → SO3(g), Δn = 1 − 3/2 = −1/2. ΔH = ΔE + ΔnRT = −97.027 + (−0.5)(8.314 × 298/1000) = −97.027 − 1.239 = −98.266 kJ.

Teacher's Note: ΔH = ΔE + ΔngRT with Δng = −1/2.

Exam Note: RT in kJ at 298 K is 2.478.

Practice Problem 21. The heat liberated on complete combustion of 7.8 g benzene is 327 kJ. This heat has been measured at constant volume and at 27°C. Calculate the heat of combustion of benzene at constant pressure. (R = 8.3 J K-1 mol-1) (IIT 1996)

Solution. Answer: −3273.7 kJ mol-1. C6H6(l) + 7.5O2(g) → 6CO2(g) + 3H2O(l); Δng = 6 − 7.5 = −1.5. ΔE per mole = −327 × (78/7.8) = −3270 kJ. ΔH = ΔE + ΔngRT = −3270 + (−1.5)(8.3 × 300/1000) = −3270 − 3.735 = −3273.7 kJ mol-1.

Teacher's Note: Scale 7.8 g to one mole (78 g), then apply ΔH = ΔE + ΔngRT.

Exam Note: Liquid water does not count in Δng.

Practice Problem 22. 1 mole of naphthalene (C10H8) was burnt in oxygen gas at 25°C at constant volume. The heat evolved was found to be 5138.8 kJ. Calculate the heat of reaction at constant pressure. (R = 8.3 J K-1 mol-1)

Solution. Answer: 5143.8 kJ (heat evolved; ΔH = −5143.8 kJ). C10H8(s) + 12O2(g) → 10CO2(g) + 4H2O(l); Δng = 10 − 12 = −2. ΔH = ΔE + ΔngRT = −5138.8 + (−2)(8.3 × 298/1000) = −5138.8 − 4.95 = −5143.8 kJ.

Teacher's Note: Water is liquid and naphthalene solid, so only O2 and CO2 count.

Exam Note: Heat evolved is quoted positive; ΔH negative.

Practice Problem 23. The enthalpy of formation of methane at constant pressure and 300 K is −75.83 kJ. What will be the heat of formation at constant volume? (R = 8.3 J K-1 mol-1)

Solution. Answer: −73.34 kJ. C(s) + 2H2(g) → CH4(g); Δng = 1 − 2 = −1. ΔE = ΔH − ΔngRT = −75.83 + (8.3 × 300/1000) = −75.83 + 2.49 = −73.34 kJ.

Teacher's Note: Graphite is solid, so Δng = −1, not −2.

Exam Note: ΔE = ΔH − ΔngRT; sign care.

Practice Problem 24. The heat change for the reaction, N2(g) + 3H2(g) → 2NH3(g) is −92.2 kJ. Calculate the heat of formation of ammonia.

Solution. Answer: −46.1 kJ mol-1. The reaction forms 2 mol NH3, so ΔHf = −92.2/2 = −46.1 kJ mol-1.

Teacher's Note: Heat of formation is per mole of compound.

Exam Note: Divide by 2 moles of NH3.

Practice Problem 25. ΔH° for the reaction 4S(s) + 6O2(g) → 4SO3(g) is −1583.2 kJ. Calculate ΔH°f of sulphur trioxide.

Solution. Answer: −395.8 kJ. Four moles of SO3 are formed, so ΔH°f = −1583.2/4 = −395.8 kJ mol-1.

Teacher's Note: Normalise the given equation to one mole of product.

Exam Note: Divide by 4.

Practice Problem 26. Calculate the heat change in the reaction 4NH3(g) + 3O2(g) → 2N2(g) + 6H2O(l) at 298 K given that heats of formation at 298 K for NH3(g) and H2O(l) are −46.0 and −286.0 kJ mol-1 respectively.

Solution. Answer: ΔH° = −1532 kJ. ΔH = 6 × (−286.0) − 4 × (−46.0) = −1716 + 184 = −1532 kJ.

Teacher's Note: Products minus reactants with stoichiometric coefficients; elements are zero.

Exam Note: Multiply by 6 and 4.

Practice Problem 27. Calculate the heat of combustion of 1 mole of C2H4(g) to form CO2(g) and H2O(g) at 398 K and 1 atmosphere, given that the heats of formation of CO2(g), H2O(g) and C2H4(g) are −94.1, −57.8 and +12.5 kcal mol-1 respectively.

Solution. Answer: −316.3 kcal. C2H4 + 3O2 → 2CO2 + 2H2O(g); ΔH = 2(−94.1) + 2(−57.8) − 12.5 = −188.2 − 115.6 − 12.5 = −316.3 kcal.

Teacher's Note: Combustion enthalpy from formation data; ethylene has positive formation enthalpy.

Exam Note: Water is gaseous here, so use −57.8.

Practice Problem 28. The heats of combustion of CH4(g) and C2H6(g) are −890.3 and −1560 kJ mol-1 respectively. Which has higher calorific value?

Solution. Answer: Methane has higher calorific value. Per gram: CH4 = 890.3/16 = 55.6 kJ g-1; C2H6 = 1560/30 = 52.0 kJ g-1.

Teacher's Note: Calorific value is heat per gram, so divide by molar mass.

Exam Note: Compare per gram, not per mole.

Practice Problem 29. The heat of combustion of butane is 2880 kJ mol-1. What is the heat liberated by burning 1 kg of butane in excess of oxygen supply?

Solution. Answer: 49655 kJ. Molar mass of C4H10 = 58 g; moles in 1 kg = 1000/58 = 17.24; heat = 17.24 × 2880 = 49655 kJ.

Teacher's Note: Moles times molar heat of combustion.

Exam Note: Butane molar mass is 58 g.

Practice Problem 30. The heat of formation of CH4(g), C2H6(g) and C4H10(g) are −74.8, −84.7 and −126.1 kJ mol-1 respectively. Arrange them in order of their efficiency as fuel per gram. Heats of formation of CO2(g) and H2O(l) are −393.5 and −285.8 kJ mol-1 respectively.

Solution. Answer: CH4 > C2H6 > C4H10. Heats of combustion: CH4 = −393.5 + 2(−285.8) + 74.8 = −890.3 kJ (55.6 kJ g-1); C2H6 = 2(−393.5) + 3(−285.8) + 84.7 = −1559.7 kJ (52.0 kJ g-1); C4H10 = 4(−393.5) + 5(−285.8) + 126.1 = −2876.9 kJ (49.6 kJ g-1).

Teacher's Note: Find combustion heat from formation data, then divide by molar mass.

Exam Note: Use 16, 30 and 58 g mol-1.

Practice Problem 31. The heat of combustion of carbon to CO2(g) is −393.5 kJ mol-1. Calculate the heat released upon formation of 35.2 g of CO2(g) from carbon and oxygen gas.

Solution. Answer: −315 kJ. Moles of CO2 = 35.2/44 = 0.8; heat = 0.8 × (−393.5) = −314.8 ≈ −315 kJ.

Teacher's Note: Combustion of carbon is the formation of CO2.

Exam Note: Scale by 0.8 mol.

Practice Problem 32. Calculate ΔH°f of C6H12O6(s) from the following data: ΔHcomb of C6H12O6(s) = −2816 kJ mol-1, ΔH°f of CO2(g) = −393.5 kJ mol-1 and ΔH°f of H2O(l) = −285.9 kJ mol-1.

Solution. Answer: −1260 kJ mol-1. C6H12O6 + 6O2 → 6CO2 + 6H2O: −2816 = 6(−393.5) + 6(−285.9) − ΔHf, so ΔHf = −2361 − 1715.4 + 2816 = −1260.4 kJ mol-1.

Teacher's Note: Reverse the usual route: formation enthalpy from combustion and product formation data.

Exam Note: Six CO2 and six H2O.

Practice Problem 33. Calculate the amount of heat released when: (i) 100 mL of 0.2 M HCl solution is mixed with 50 mL of 0.2 M KOH. (ii) 200 mL of 0.1 M H2SO4 is mixed with 200 mL of 0.2 M KOH solution. (Taking the heat of neutralisation of a strong acid with a strong base as 57.1 kJ per mole of water formed, the value used in Problem 34.)

Solution. Answer (book): (i) 0.57 kJ (ii) 2.18 kJ. (i) KOH is limiting: 0.050 × 0.2 = 0.01 mol OH-; heat = 0.01 × 57.1 = 0.571 kJ ≈ 0.57 kJ. (ii) H+ = 0.2 × 0.1 × 2 = 0.04 mol; OH- = 0.2 × 0.2 = 0.04 mol; heat = 0.04 × 57.1 = 2.28 kJ. Corrected: (ii) is 2.28 kJ (the printed 2.18 kJ does not follow from 57.1 kJ/mol).

Teacher's Note: Heat equals moles of water formed times 57.1 kJ; find the limiting reagent.

Exam Note: H2SO4 is dibasic: count 2 H+ each.

Practice Problem 34. When 100 mL each of HCl and NaOH solutions are mixed, 5.71 kJ of heat was evolved. What is the molarity of two solutions? The heat of neutralisation of HCl is 57.1 kJ.

Solution. Answer: 1 M. Moles of water formed = 5.71/57.1 = 0.1 mol, which is in 0.1 L of each solution, so molarity = 0.1/0.1 = 1 M.

Teacher's Note: Heat divided by molar heat of neutralisation gives moles reacted.

Exam Note: Equal volumes and complete neutralisation.

Practice Problem 35. Determine the enthalpy of the reaction C3H8(g) + H2(g) → C2H6(g) + CH4(g) at 25°C, using the given enthalpy of combustion values under standard conditions. Compound: H2(g), CH4(g), C2H6(g), C (graphite); ΔH°(kJ mol-1): −285.8, −890.0, −1560.0, −393.5. The standard enthalpy of formation of C3H8(g) is −103.8 kJ mol-1. (IIT 1992)

Solution. Answer: −55.7 kJ. ΔHf(CH4) = −393.5 + 2(−285.8) + 890.0 = −75.1; ΔHf(C2H6) = 2(−393.5) + 3(−285.8) + 1560.0 = −84.4. ΔH = (−84.4 − 75.1) − (−103.8) = −55.7 kJ.

Teacher's Note: Convert combustion data to formation enthalpies, then products minus reactants.

Exam Note: H2 has ΔHf = 0.

Practice Problem 36. The standard enthalpy of combustion at 25°C of hydrogen, cyclohexene (C6H10) and cyclohexane (C6H12) are −241, −3800 and −3920 kJ mol-1 respectively. Calculate the heat of hydrogenation of cyclohexene. [ISM (Dhanbad) 1992]

Solution. Answer: −121 kJ mol-1. C6H10(l) + H2(g) → C6H12(l): ΔH = ΔHc(H2) + ΔHc(C6H10) − ΔHc(C6H12) = −241 − 3800 + 3920 = −121 kJ mol-1.

Teacher's Note: Hydrogenation enthalpy = sum of reactant combustion enthalpies minus product combustion enthalpy.

Exam Note: Reactants minus products for combustion data.

Practice Problem 37. From the following data of heats of combustion, find the heat of formation of CH3OH(l): CH3OH(l) + (3/2)O2(g) → CO2(g) + 2H2O(l), ΔH = −726 kJ; C(s) + O2(g) → CO2(g), ΔH = −394 kJ; H2(g) + ½O2(g) → H2O(l), ΔH = −286 kJ. [BIT (Ranchi) 1991]

Solution. Answer: −240 kJ mol-1. C + 2H2 + ½O2 → CH3OH: ΔHf = −394 + 2(−286) − (−726) = −394 − 572 + 726 = −240 kJ mol-1.

Teacher's Note: Hess's law: add C and 2H2 combustion, subtract methanol combustion.

Exam Note: Two moles of H2 are needed.

Practice Problem 38. Calculate the heat of formation of methane, given that heat of formation of water = −286 kJ mol-1, heat of combustion of methane = −890 kJ mol-1, heat of combustion of carbon = −393.5 kJ mol-1. [ISM (Dhanbad) 1993]

Solution. Answer: −75.5 kJ mol-1. ΔHf(CH4) = ΔHc(C) + 2ΔHf(H2O) − ΔHc(CH4) = −393.5 + 2(−286) + 890 = −75.5 kJ mol-1.

Teacher's Note: Formation of H2O equals combustion of H2; use Hess's law.

Exam Note: Two H2O per CH4.

Practice Problem 39. Calculate the standard heat of formation of C10H8 (naphthalene) if standard heat of combustion of naphthalene is −1231.0 kcal at 298 K and standard heat of formation of CO2(g) and H2O(l) are −94.0 kcal and −68.4 kcal respectively.

Solution. Answer: 17.4 kcal. C10H8 + 12O2 → 10CO2 + 4H2O: −1231.0 = 10(−94.0) + 4(−68.4) − ΔHf, so ΔHf = −940 − 273.6 + 1231.0 = +17.4 kcal.

Teacher's Note: Positive formation enthalpy: naphthalene is less stable than its elements' combustion route.

Exam Note: Ten CO2 and four H2O.

Practice Problem 40. The heat of combustion of liquid ethanol is −327.0 kcal. Calculate the heat of formation of ethanol, given that the heats of formation of CO2(g) and H2O(l) are −94.0 kcal and −68.4 kcal respectively.

Solution. Answer: −66.2 kcal. C2H5OH + 3O2 → 2CO2 + 3H2O: −327.0 = 2(−94.0) + 3(−68.4) − ΔHf, so ΔHf = −188 − 205.2 + 327.0 = −66.2 kcal.

Teacher's Note: Rearrange ΔHc = ΣΔHf(products) − ΔHf(ethanol).

Exam Note: Two CO2, three H2O.

Practice Problem 41. Calculate heat of formation of cane sugar from following data: H2(g) + ½O2(g) → H2O(l); ΔH = −68.4 kcal. C(s) + O2(g) → CO2(g); ΔH = −94.4 kcal. C12H22O11(s) + 12O2(g) → 12CO2(g) + 11H2O(l); ΔH = −1350.0 kcal.

Solution. Answer: −535.2 kcal. ΔHf = 12(−94.4) + 11(−68.4) − (−1350.0) = −1132.8 − 752.4 + 1350.0 = −535.2 kcal. (The key prints −535.2 kcal.)

Teacher's Note: Hess's law with 12 C, 11 H2 and combustion of sugar reversed.

Exam Note: Multiply 12 and 11 correctly.

Practice Problem 42. The heats of formation of C6H6(l), H2O(l) and CO2(g) are 11.70, −68.4 and −94.0 kcal respectively. Calculate the heat of combustion of benzene (l).

Solution. Answer: −780.9 kcal. C6H6 + (15/2)O2 → 6CO2 + 3H2O: ΔH = 6(−94.0) + 3(−68.4) − 11.70 = −564 − 205.2 − 11.7 = −780.9 kcal.

Teacher's Note: Combustion enthalpy equals products' formation minus benzene formation.

Exam Note: Benzene formation is positive.

Practice Problem 43. Calculate the heat of hydrogenation of C2H2 to C2H4. H2(g) + ½O2(g) → H2O(l), ΔH = −68.32 kcal; C2H2(g) + (5/2)O2(g) → 2CO2(g) + H2O(l), ΔH = −310.61 kcal; C2H4(g) + 3O2(g) → 2CO2(g) + 2H2O(l), ΔH = −337.32 kcal.

Solution. Answer: −41.61 kcal. C2H2 + H2 → C2H4: ΔH = (−310.61) + (−68.32) − (−337.32) = −41.61 kcal.

Teacher's Note: Add acetylene and hydrogen combustion, subtract ethylene combustion.

Exam Note: Reverse the ethylene equation.

Practice Problem 44. Calculate the heat of hydrogenation, C2H4(g) + H2(g) → C2H6(g), given that the heat of combustion of ethylene, hydrogen and ethane are −337.0, −68.4 and −373.0 kcal respectively.

Solution. Answer: −32.4 kcal. ΔH = −337.0 + (−68.4) − (−373.0) = −32.4 kcal.

Teacher's Note: Reactants' combustion minus product's combustion.

Exam Note: Same pattern as Problem 36.

Practice Problem 45. If the heat of formation of Al2O3(s) and Cr2O3(s) are 1596 kJ and 1134 kJ (both exothermic) respectively. Calculate ΔH of the thermite reaction, Cr2O3(s) + 2Al(s) → 2Cr(s) + Al2O3(s).

Solution. Answer: −462 kJ. ΔH = ΔHf(Al2O3) − ΔHf(Cr2O3) = −1596 − (−1134) = −462 kJ.

Teacher's Note: Elements have zero formation enthalpy; use signs for exothermic values.

Exam Note: Both given as exothermic: insert negatives.

Practice Problem 46. Calculate the enthalpy of transition of rhombic sulphur into monoclinic sulphur from the following data: S(rhombic) + O2(g) → SO2(g), ΔH = −297.5 kJ; S(monoclinic) + O2(g) → SO2(g), ΔH = −299.9 kJ.

Solution. Answer: +2.4 kJ. S(rhombic) → S(monoclinic): ΔH = −297.5 − (−299.9) = +2.4 kJ.

Teacher's Note: Subtract combustion enthalpies of the two allotropes.

Exam Note: Rhombic is the more stable form.

Practice Problem 47. Calculate ΔH for the reaction H2(g) + ½O2(g) → H2O(g) given that bond energies of H–H and O=O bond and O–H bond are 433 kJ mol-1, 492 kJ mol-1 and 464 kJ mol-1.

Solution. Answer: −249 kJ. ΔH = Σ(bonds broken) − Σ(bonds formed) = (433 + ½ × 492) − (2 × 464) = 679 − 928 = −249 kJ.

Teacher's Note: Bonds broken minus bonds formed; water has two O–H bonds.

Exam Note: Half a mole of O=O is broken.

Practice Problem 48. Using the bond enthalpy data, calculate ΔH of the following reaction: 2Cl2(g) + 2H2O(g) → 4HCl(g) + O2(g) given that bond energies of Cl–Cl, H–Cl, O–H and O=O are 242.8, 431.8, 464 and 442 kJ mol-1 respectively.

Solution. Answer: 172.4 kJ mol-1. ΔH = [2(242.8) + 4(464)] − [4(431.8) + 442] = (485.6 + 1856) − (1727.2 + 442) = 2341.6 − 2169.2 = 172.4 kJ mol-1.

Teacher's Note: Two H2O contain four O–H bonds; four H–Cl bonds form.

Exam Note: Positive ΔH: endothermic.

Practice Problem 49. Calculate the enthalpy of the reaction SnO2(s) + 2H2(g) → Sn(s) + 2H2O(l) given that enthalpy of formation of SnO2 and H2O(l) are −580.7 kJ and −285.8 kJ respectively.

Solution. Answer: +9.1 kJ. ΔH = 2(−285.8) − (−580.7) = −571.6 + 580.7 = +9.1 kJ.

Teacher's Note: Products minus reactants of formation enthalpies.

Exam Note: Elements Sn and H2 contribute zero.

Practice Problem 50. Calculate the enthalpy change for the reaction H2(g) + Cl2(g) → 2HCl(g) given that bond energies of H–H, Cl–Cl and H–Cl are 436, 243 and 432 kJ mol-1.

Solution. Answer: −185 kJ mol-1. ΔH = (436 + 243) − 2(432) = 679 − 864 = −185 kJ mol-1.

Teacher's Note: Bonds broken minus bonds formed.

Exam Note: Two H–Cl bonds form.

Practice Problem 51. Use the bond energy data and calculate the enthalpy change for: 2C(g) + 2H(g) + 2Cl(g) → H–C(Cl)(H)–Cl, i.e. the formation of CH2Cl2 (one carbon bonded to two H and two Cl). The bond energies of C–H and C–Cl are 413 and 328 kJ mol-1 respectively.

Solution. Answer: −1482 kJ mol-1. Four bonds form: 2 C–H and 2 C–Cl, ΔH = −(2 × 413 + 2 × 328) = −(826 + 656) = −1482 kJ mol-1. (The printed equation shows 2C(g); the answer corresponds to one carbon atom in the product.)

Teacher's Note: Atoms to molecule: only bond formation, so ΔH is minus the sum of bond energies.

Exam Note: Count four bonds on the single carbon.

Practice Problem 52. Calculate the heat of formation of ammonia from the following data: N2(g) + 3H2(g) → 2NH3(g). The bond energies of N≡N, H–H and N–H bonds are 226, 104 and 93 kcal respectively.

Solution. Answer: −10 kcal. For 2NH3: ΔH = (226 + 3 × 104) − (6 × 93) = 538 − 558 = −20 kcal. Heat of formation per mole of NH3 = −20/2 = −10 kcal.

Teacher's Note: Divide reaction enthalpy by 2 for per mole of NH3.

Exam Note: Six N–H bonds form in 2 NH3.

Practice Problem 53. Use the following bond dissociation energies to compute the C–H bond energy in methane: (i) CH4(g) → CH3(g) + H(g); ΔH = 475 kJ mol-1 (ii) CH3(g) → CH2(g) + H(g); ΔH = 470 kJ mol-1 (iii) CH2(g) → CH(g) + H(g); ΔH = 416 kJ mol-1 (iv) CH(g) → C(g) + H(g); ΔH = 335 kJ mol-1

Solution. Answer: 424 kJ mol-1. Average C–H bond energy = (475 + 470 + 416 + 335)/4 = 1696/4 = 424 kJ mol-1.

Teacher's Note: Mean bond enthalpy is the average of stepwise dissociation enthalpies.

Exam Note: Divide the total by four bonds.

Practice Problem 54. Calculate ΔH°f for chloride ion from the following data: ½H2(g) + ½Cl2(g) → HCl(g); ΔH = −92.4 kJ mol-1. HCl(g) + nH2O → H+(aq.) + Cl-(aq.); ΔH = −74.8 kJ mol-1. ΔH°f(H+, aq.) = 0.0 kJ mol-1. (IIT 1992)

Solution. Answer: −167.2 kJ mol-1. Adding the two equations: ½H2(g) + ½Cl2(g) + nH2O → H+(aq.) + Cl-(aq.); ΔH = −167.2 kJ mol-1. Since ΔH°f(H+) = 0, ½Cl2(g) + nH2O → Cl-(aq.); ΔH°f = −167.2 kJ mol-1.

Teacher's Note: Ionic convention sets ΔHf of aqueous H+ to zero.

Exam Note: Add the two steps by Hess's law.

Practice Problem 55. The heat of ionisation of formic acid is 1.5 kJ/mol. 9.2 g formic acid on reaction with ammonium hydroxide gives 10.8 kJ of heat. Calculate the heat of ionisation of ammonium hydroxide. (1 cal = 4.2 J)

Solution. Answer: 2.04 kJ/mol. Moles of HCOOH = 9.2/46 = 0.2; heat of neutralisation (HCOOH + NH4OH) = 10.8/0.2 = 54 kJ/mol. Taking the strong acid–strong base value as 13.7 kcal = 13.7 × 4.2 = 57.54 kJ/mol (the book's implied value, not stated in the problem): 57.54 = 54 + 1.5 + x, so x = 2.04 kJ/mol.

Teacher's Note: Neutralisation enthalpy = 57.54 minus ionisation enthalpies of the weak acid and base.

Exam Note: Assumed strong acid-base value: 13.7 kcal per mole.

Practice Problem 56. Assuming that 50% of the heat is useful, how many kg of water at 15°C can be heated to 95.0°C by burning 200 litre of methane measured at NTP? The heat of combustion of methane is 211 kcal mol-1.

Solution. Answer: 11.76 kg. Moles of CH4 = 200/22.4 = 8.93; heat = 8.93 × 211 = 1884 kcal; useful 50% = 942 kcal. Mass of water × 1 cal g-1 °C-1 × 80°C = 942 × 1000 cal, so mass = 11775 g ≈ 11.8 kg (book: 11.76 kg).

Teacher's Note: Useful heat = 50% of combustion heat; q = m × s × ΔT.

Exam Note: Temperature rise is 80°C; specific heat 1 cal g-1.

Practice Problem 57. The standard potential for the reaction Ag+(aq.) + Fe2+(aq.) → Fe3+(aq.) + Ag(s) is 0.028 V. What is the standard free energy change for this reaction?

Solution. Answer: −2.702 kJ mol-1. n = 1; ΔG° = −nFE° = −1 × 96500 × 0.028 = −2702 J = −2.702 kJ mol-1.

Teacher's Note: Use ΔG° = −nFE° with one electron transferred.

Exam Note: F = 96500 C mol-1.

Step-by-Step OP Tandon Solutions for JEE Math

Access JEE Mathematics Solutions

Explore reliable mathematical solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 7 Chemical Thermodynamics Thermochemistry Part 2 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Concept-Driven Math Answers

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.