OP Tandon Solutions Physical Chemistry IIT JEE Chapter 4 States Of Matter Part 3

Official OP Tandon Textbook Solutions: JEE Chemistry Chapter 04 States Of Matter

Access comprehensive textbook solutions for Chapter 04 States Of Matter using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Chapter-wise Solutions for Chemistry: Chapter 04 States Of Matter

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

4. States of Matter - Part 3 (pp. 280-315)

Questions (Matrix Match Type)

Matrix Match Question 1[A]. Match the crystalline solids in Column-I with the coordination number of their ions in Column-II.

Column-IColumn-II
(a) CsCl(p) Coordination number of cation = 8
(b) CaF2(q) Coordination number of anion = 4
(c) ZnS(r) Coordination number of cation = 4
(d) Na2O(s) Coordination number of anion = 8

Solution.

(a)→(p), (s); (b)→(p), (q); (c)→(q), (r); (d)→(r), (s).

Teacher's Note: CsCl is 8:8; fluorite CaF2 is 8:4; zinc blende 4:4; antifluorite Na2O is 4:8.

Exam Note: Know CN pairs of CsCl, fluorite, ZnS, antifluorite types.

Matrix Match Question 1[B]. The diagrams show different processes for a given amount of an ideal gas (i = initial state, f = final state: (i) P against V, a falling straight line; (ii) P against 1/V, a rising straight line; (iii) P against T, a rising straight line; (iv) V against T, a rising straight line). Match the Column-I and Column-II.

Column-IColumn-II
(a) Fig. (i): system proceeding from initial state to final state(p) Temperature will remain constant
(b) Fig. (ii): system from initial state to final state(q) Pressure will decrease
(c) Fig. (iii): system proceeding from initial state to final state(r) Volume will be constant
(d) Fig. (iv): system proceeding from initial state to final state(s) Temperature may increase or decrease or may first increase and then decrease

Solution.

(a)→(s); (b)→(p); (c)→(r); (d)→(q).

Teacher's Note: Convert each graph to PV = nRT: P vs 1/V is isothermal; P vs T is isochoric.

Exam Note: Identify the constant variable from the graph shape first.

Matrix Match Question 1[C]. Match Column-I with Column-II for ideal gases.

Column-IColumn-II
(a) If temperature of given gas is increased(p) Average speed of gas molecules will increase
(b) If the pressure of a given gas is increased at constant temperature(q) Root mean square speed of gas molecules will increase
(c) If the density of a given gas is lowered at constant temperature(r) Most probable speed of gas molecules will increase
(d) If the volume of a given gas is increased at constant temperature(s) Speed of gas molecules will not change

Solution.

(a)→(p), (q), (r); (b)→(s); (c)→(s); (d)→(s). Corrected: the book key prints (c)→(p), (q), (r), but speeds depend only on temperature, so at constant temperature lowering the density leaves them unchanged: (c)→(s).

Teacher's Note: All three molecular speeds are proportional to √T and independent of pressure, volume or density.

Exam Note: Speeds change only with temperature, never with P or V alone.

Matrix Match Question 1[D]. Match the Column-I with Column-II.

Column-IColumn-II
(a) Boyle's temperature(p) a/Rb
(b) ½(Inversion temperature)(q) 8a/27Rb
(c) Critical temperature(r) The gas cannot be liquefied above this temperature, on applying pressure
(d) Critical pressure(s) a/27b2

Solution.

(a)→(p); (b)→(p); (c)→(q), (r); (d)→(s).

Teacher's Note: TB = a/Rb, Ti = 2a/Rb, Tc = 8a/27Rb, Pc = a/27b2 from van der Waals constants.

Exam Note: Memorise the four van der Waals critical-constant formulas.

Matrix Match Question 1[E]. Match the Column-I with Column-II.

Column-IColumn-II
(a) Real gas at high pressure(p) PV = RT + Pb
(b) Force of attraction among gas molecules is negligible(q) PV = nRT
(c) At high temperature and low pressure(r) Z = 1
(d) Real gas at N.T.P.(s) (P + an2/V2)(V − nb) = nRT

Solution.

(a)→(p); (b)→(p); (c)→(q), (r); (d)→(s).

Teacher's Note: High pressure: volume term dominates, PV = RT + Pb; high T and low P: gas behaves ideally.

Exam Note: State which correction (a or b) is negligible in each condition.

Matrix Match Question 1[F]. Match the Column-I with Column-II.

Column-IColumn-II
(a) Internal energy of gas(p) (3/2)RT
(b) Translational kinetic energy of gas molecules(q) (5/2)RT
(c) The temperature at which there is no molecular motion(r) −273°C
(d) The lowest possible temperature at which gas molecules have no heat(s) 3.716 kJ at 298 K

Solution.

(a)→(p), (q), (s); (b)→(p), (s); (c)→(r); (d)→(r). Check: (3/2)(8.314)(298) = 3716 J = 3.716 kJ.

Teacher's Note: Translational KE per mole is (3/2)RT; (5/2)RT arises for diatomic internal energy; absolute zero is −273°C.

Exam Note: Quote (3/2)RT per mole and its value at 298 K.

Matrix Match Question 1[G]. Match the Column-I with Column-II.

Column-IColumn-II
(a) NaCl(p) Schottky defect
(b) ZnS(q) Frenkel defect
(c) AgBr(r) Develops yellow colour on heating due to F-centre
(d) KCl(s) Develops blue/violet colour on heating due to F-centre

Solution.

(a)→(p), (r); (b)→(q); (c)→(p), (q); (d)→(p), (s).

Teacher's Note: AgBr shows both Schottky and Frenkel defects; excess Na gives yellow NaCl, excess K gives violet KCl.

Exam Note: Link crystal with defect type and F-centre colour.

Matrix Match Question 1[H]. Match the crystalline solids in Column-I with packing arrangement in Column-II.

Column-IColumn-II
(a) CaF2(p) Cations in ccp arrangement
(b) NaCl(q) Anions in tetrahedral voids
(c) ZnS(r) Anions in ccp arrangement
(d) Na2O(s) Cations in octahedral voids

Solution.

(a)→(p), (q); (b)→(r), (s); (c)→(r); (d)→(r). Corrected: the book key prints (c)→(q) and (d)→(q); but in ZnS the S2− ions form the ccp lattice with Zn2+ in tetrahedral voids, and in Na2O the O2− ions form the ccp lattice with Na+ in tetrahedral voids, so both match (r), not (q).

Teacher's Note: Ask which ion forms ccp and which fills voids: fluorite has cations ccp, antifluorite has anions ccp.

Exam Note: State lattice ion and void ion separately for each solid.

Matrix Match Question 1[I]. Match the crystal system in Column-I with unit cell dimensions in Column-II.

Column-IColumn-II
(a) Cubic(p) a = b = c
(b) Rhombohedral(q) α = β = γ = 90°
(c) Orthorhombic(r) a ≠ b ≠ c
(d) Triclinic(s) α ≠ β ≠ γ ≠ 90°

Solution.

(a)→(p), (q); (b)→(p); (c)→(q), (r); (d)→(r), (s).

Teacher's Note: Rhombohedral has equal edges but equal non-right angles, so only (p) fits.

Exam Note: Learn the seven crystal systems edge and angle conditions.

Matrix Match Question 1[J]. Match the crystal system in Column-I with Bravais lattice in Column-II.

Column-IColumn-II
(a) Cubic(p) Primitive only
(b) Hexagonal(q) Primitive, body centred
(c) Tetragonal(r) Primitive, face centred, body centred
(d) Orthorhombic(s) Primitive, face centred, body centred and end centred

Solution.

(a)→(r); (b)→(p); (c)→(q); (d)→(s).

Teacher's Note: Cubic has P, F, I; tetragonal has P, I; orthorhombic has all four types P, I, F, C.

Exam Note: Count the Bravais lattices: 3, 1, 2, 4 for these systems.

Matrix Match Question 1[K]. Match the Column-I with Column-II.

Column-IColumn-II
(a) Root mean square velocity(p) √(3P/d)
(b) Average velocity(q) √(3RT/m)
(c) Most probable velocity(r) √(8P/πd)
(d) Velocity possessed by maximum fraction of molecules(s) √(2RT/m)

Solution.

(a)→(p), (q); (b)→(r); (c)→(s); (d)→(s).

Teacher's Note: Using PM = dRT, urms = √(3P/d) = √(3RT/M); the most probable speed is the one of maximum fraction.

Exam Note: Most probable speed equals speed possessed by most molecules.

Practice Problems

Practice Problem 1. A gas occupies a volume of 250 cm3 at 745 torr and 25°C. What additional pressure is required to reduce the gas volume to 200 cm3 at the same temperature?

Solution.

Answer: 186.25 torr. Check: P2 = 745 × 250/200 = 931.25 torr, so additional pressure = 931.25 − 745 = 186.25 torr.

Teacher's Note: Isothermal: apply P1V1 = P2V2, then subtract the original pressure.

Exam Note: Give additional pressure, not final pressure.

Practice Problem 2. A vessel of 120 cm3 contains a certain mass of a gas at 20°C and 750 torr pressure. The gas was transferred to a vessel of volume 180 cm3. Calculate the pressure of the gas at the same temperature.

Solution.

Answer: 500 torr. Check: P2 = 750 × 120/180 = 500 torr.

Teacher's Note: Constant T and mass means Boyle's law; volume rises by 1.5 times, so pressure falls to two-thirds.

Exam Note: Show P1V1 = P2V2 substitution.

Practice Problem 3. A gaseous system has a volume of 580 cm3 at a certain pressure. If its pressure is increased by 0.96 atm, its volume becomes 100 cm3. Determine the pressure of the system.

Solution.

Answer: 0.2 atm.
Hint: P × 580 = (P + 0.96) × 100, so 480P = 96 and P = 0.2 atm.

Teacher's Note: Let initial pressure be P and apply Boyle's law to P and P + 0.96.

Exam Note: Form the equation with P unknown before solving.

Practice Problem 4. A gas filled freely collapsible balloon is pushed from the surface level of a lake to a depth of 50 m. Approximately what per cent of its original volume will the balloon finally have, assuming that the gas behaves ideally and temperature is same at the surface and at 50 m depth?

Solution.

Answer: 17.13%.
Hint: P1 = 1 atm = 76.0 × 13.6 × 981 dyne/cm2. P2 = 76.0 × 13.6 × 981 + (50 × 100) × 1 × 981 = 981[76.0 × 13.6 + 5000] = 981 × 6033.6 dyne/cm2. By Boyle's law, V2/V1 = P1/P2 = (76.0 × 13.6 × 981)/(981 × 6033.6) = 0.1713, so % = 17.13.

Teacher's Note: Pressure at depth = atmospheric + hydrostatic (water density 1 g/cm3); then Boyle's law.

Exam Note: Convert 50 m to cm and use the same pressure units.

Practice Problem 5. A sample of gas at room temperature is placed in an evacuated bulb of volume 0.51 dm3 and is found to exert a pressure of 0.24 atm. The bulb is connected to another evacuated bulb whose volume is 0.63 dm3. What is the new pressure of the gas at room temperature?

Solution.

Answer: 0.1074 atm. Check: P2 = 0.24 × 0.51/(0.51 + 0.63) = 0.1224/1.14 = 0.1074 atm.

Teacher's Note: Gas expands into the total volume of both bulbs at constant T; apply Boyle's law.

Exam Note: Final volume is the sum of both bulbs.

Practice Problem 6. It is desired to increase the volume of 800 cm3 of a gas by 20% keeping the pressure constant. To what temperature should the gas be heated, if the initial temperature is 22°C?

Solution.

Answer: 81°C. Check: V2 = 1.2V1, so T2 = 1.2 × 295 = 354 K = 81°C.

Teacher's Note: Charles' law at constant P: V/T constant; use Kelvin temperature for the ratio.

Exam Note: Convert to kelvin before applying Charles' law.

Practice Problem 7. A chamber of constant volume contains hydrogen gas. When the chamber is immersed in a bath of melting ice (0°C) the pressure of the gas is 800 torr. What pressure will be indicated when the chamber is brought to 100°C?

Solution.

Answer: 1093 torr. Check: P2 = 800 × 373/273 = 1093 torr.

Teacher's Note: Gay-Lussac's law at constant volume: P/T constant, with T in kelvin.

Exam Note: Use 273 K and 373 K, not Celsius values.

Practice Problem 8. Calculate the volume occupied by 4.045 × 1023 molecules of oxygen at 27°C and having a pressure of 700 torr.

Solution.

Answer: 17.97 dm3.
Hint: No. of moles n = (4.045 × 1023)/(6.023 × 1023) = 0.672; P = 700/760 atm. Now use PV = nRT. Check: V = 0.672 × 0.0821 × 300/0.921 ≈ 17.96 dm3.

Teacher's Note: Convert molecules to moles by dividing by NA, then use the ideal gas equation.

Exam Note: Convert torr to atm to match R = 0.0821.

Practice Problem 9. Calculate the moles of hydrogen gas in a 500 cm3 sample of hydrogen gas at a pressure of 760 mm of Hg and 27°C.

Solution.

Answer: 2.03 × 10−2 mol.
Hint: 500 cm3 = 0.5 L, 760 mm of Hg = 1 atm. Now apply the gas equation, n = PV/RT = (1 × 0.5)/(0.0821 × 300) = 0.0203 mol.

Teacher's Note: Direct use of n = PV/RT after converting cm3 to litres.

Exam Note: Volume must be in litres with R = 0.0821.

Practice Problem 10. Calculate the volume occupied by 4 mole of an ideal gas at 2.5 × 105 Nm−2 pressure and 300 K temperature.

Solution.

Answer: 39.9 dm3.
Hint: V = nRT/P, n = 4, R = 8.314 N m K−1 mol−1, T = 300, P = 2.5 × 105 N m−2. Check: V = 4 × 8.314 × 300/(2.5 × 105) = 0.0399 m3 = 39.9 dm3.

Teacher's Note: With SI pressure use R = 8.314 J/(K mol); the volume comes out in m3.

Exam Note: Convert 0.0399 m3 to dm3 (×1000).

Practice Problem 11. What is the volume occupied by 11 g of carbon dioxide at 27°C and 780 mm of Hg pressure?

Solution.

Answer: 6 litre.
Hint: 780 mm of Hg = 780/760 atm; w = 11 g; M = 44 g mol−1. Now apply V = (w/M)(RT/P) = 0.25 × 0.0821 × 300/1.026 = 6.0 L.

Teacher's Note: n = 11/44 = 0.25 mol; substitute in V = nRT/P with P in atm.

Exam Note: Molar mass of CO2 is 44, not 28.

Practice Problem 12. A certain quantity of a gas occupies 200 mL when collected over water at 15°C and 745 mm pressure. It occupies 182.6 mL in dry state at NTP. Find the vapour pressure of water at 15°C.

Solution.

Answer: 13 mm.
Check: dry gas at 288 K would occupy 182.6 × 288/273 = 192.6 mL at 760 mm; at 200 mL its pressure is 760 × 192.6/200 = 732 mm. Vapour pressure = 745 − 732 = 13 mm.

Teacher's Note: Gas collected over water: total pressure = dry gas pressure + aqueous tension.

Exam Note: Subtract dry-gas pressure from the 745 mm total.

Practice Problem 13. The density of a gas is found to be 2.07 g L−1 at 30°C and 2 atmospheric pressure. What is its density at NTP?

Solution.

Answer: 1.149 g L−1.
Hint: Apply P1 = (D1/M)RT1, P2 = (D2/M)RT2, so P1/(D1T1) = P2/(D2T2). Check: D2 = 2.07 × 1 × 303/(2 × 273) = 1.149 g L−1.

Teacher's Note: Density is proportional to P/T, so D2 = D1(P2/P1)(T1/T2).

Exam Note: NTP means 1 atm and 273 K.

Practice Problem 14. At the top of a mountain, the thermometer reads 0°C and the barometer reads 700 mm Hg. At the bottom of the mountain the thermometer reads 30°C and the pressure 760 mm Hg. Compare the density of the air at the top with that at the bottom.

Solution.

Answer: 1.02 : 1.
Hint: Density is inversely proportional to volume. dtop/dbottom = Vb/Vt = TbPt/(TtPb) = (303 × 700)/(273 × 760) = 1.02/1.

Teacher's Note: d ∝ P/T for a fixed gas; compare the two P/T ratios.

Exam Note: Put the ratio as top : bottom.

Practice Problem 15. Calculate the volume occupied by 5 g of acetylene gas at 50°C and 740 mm of pressure. (IIT 1991)

Solution.

Answer: 5.23 litre. Check: M(C2H2) = 26; V = (5/26)(0.0821)(323)/(740/760) ≈ 5.24 L.

Teacher's Note: Moles = 5/26; apply PV = nRT with T = 323 K and P in atm.

Exam Note: Molar mass of acetylene is 26 g/mol.

Practice Problem 16. Calculate the volume occupied by 7 g of nitrogen at 27°C and 750 mm Hg pressure. (MLNR 1992)

Solution.

Answer: 6.24 litre. Check: n = 7/28 = 0.25; V = 0.25 × 0.0821 × 300/(750/760) = 6.24 L.

Teacher's Note: Nitrogen gas N2 has molar mass 28, giving 0.25 mol.

Exam Note: Use N2 = 28 and P in atm.

Practice Problem 17. A spherical balloon of 21 cm diameter is to be filled up with hydrogen at NTP from a cylinder containing the gas at 20 atm and 27°C. The cylinder can hold 2.82 litre of water at NTP. Calculate the number of balloons that can be filled up. (MLNR 1991)

Solution.

Answer: 10.
Hint: Volume of one balloon = (4/3)πr3 = (4/3) × (22/7) × (21/2)3 = 4851 cm3 = 4.851 litre. Let n balloons be filled. Total volume of hydrogen in the cylinder at NTP: V = (20 × 2.82 × 273)/(300 × 1) = 51.324 litre. Actual volume of H2 to be transferred to balloons = 51.324 − 2.82 (2.82 litre retained in the cylinder) = 48.504 litre. No. of balloons filled = 48.504/4.851 = 10.

Teacher's Note: Convert cylinder gas to NTP, subtract what stays in the cylinder, then divide by balloon volume.

Exam Note: Remember the 2.82 L left in the cylinder.

Practice Problem 18. An open vessel at 27°C is heated until three-fifth of the air in it has been expelled. Assuming that the volume of the vessel remains constant, find the temperature to which the vessel has been heated. (MLNR 1990)

Solution.

Answer: 477°C.
Hint: Both volume and pressure are constant as the vessel is open, i.e. n1RT1 = n2RT2 or n1/n2 = T2/T1. If n1 = 1, n2 = 1 − 3/5 = 2/5. So 5/2 = T2/300, or T2 = 750 K = 477°C.

Teacher's Note: Open vessel: P and V fixed so nT is constant; 2/5 of the air remains.

Exam Note: Convert 750 K back to °C for the answer.

Practice Problem 19. A gaseous mixture of He and O2 is found to have a density of 0.518 g L−1 at 25°C and 720 torr. What is the per cent by mass of helium in this mixture?

Solution.

Answer: 19.88%.
Hint: First determine the average molecular mass and then number of moles of helium and oxygen. Moles of helium = 0.665; moles of oxygen = 0.335. Mass per cent of helium = (4 × 0.665)/(4 × 0.665 + 32 × 0.335) × 100 = 19.88%. Check: M = dRT/P = 0.518 × 0.0821 × 298/0.947 = 13.38.

Teacher's Note: Find average molar mass from density, then mole fractions, then convert to mass per cent.

Exam Note: Report mass per cent, not mole per cent.

Practice Problem 20. A sample of natural gas is 85.2% methane and 14.8% ethane by mass. What is the density of this mixture at 18°C and 748 mm Hg?

Solution.

Answer: 0.71 g L−1. Corrected: the book answer 0.74 g L−1 treats the mass percentages as mole percentages (M = 0.852 × 16 + 0.148 × 30 = 18.07). By mass, 85.2 g CH4 = 5.325 mol and 14.8 g C2H6 = 0.493 mol, so M = 100/5.818 = 17.19 g mol−1. d = PM/RT = (748/760) × 17.19/(0.0821 × 291) = 0.708 ≈ 0.71 g L−1.

Teacher's Note: Percent by mass must be converted to moles before averaging molar mass; then d = PM/RT.

Exam Note: Do not use mass percent as mole fraction.

Practice Problem 21. 125 mL of a gas A of pressure 500 mm is mixed with 200 mL of another gas B at a pressure of 300 mm in a vessel of 150 mL capacity. What will be the total pressure of the resulting mixture if the temperature is kept constant?

Solution.

Answer: 816.67 mm. Check: (125 × 500 + 200 × 300)/150 = 122500/150 = 816.67 mm.

Teacher's Note: Each gas obeys Boyle's law into 150 mL; total pressure is the sum of partial pressures.

Exam Note: Sum PiVi/V for each gas.

Practice Problem 22. Two vessels whose volumes are in the ratio 2 : 1 contain nitrogen and oxygen at 800 mm and 680 mm pressures respectively, when they are connected together what will be the pressure of the resulting mixture?

Solution.

Answer: 760 mm. Check: P = (2 × 800 + 1 × 680)/3 = 2280/3 = 760 mm.

Teacher's Note: Total moles proportional to sum of PV; divide by the combined volume (3 units).

Exam Note: Use volume ratio 2 : 1 as 2 and 1 units.

Practice Problem 23. A 10 litre flask at 298 K contains a gaseous mixture of CO and CO2 at a total pressure of 2 atm. If 0.20 mole of CO is present, find its partial pressure and also that of CO2.

Solution.

Answer: Partial pressure of CO = 0.49 atm; partial pressure of CO2 = 1.51 atm. Check: p(CO) = 0.20 × 0.0821 × 298/10 = 0.489 atm; 2 − 0.489 = 1.51 atm.

Teacher's Note: Partial pressure of CO from PV = nRT; CO2 follows by Dalton's law.

Exam Note: Subtract p(CO) from total 2 atm for CO2.

Practice Problem 24. Calculate the total pressure in a mixture of 4 g of oxygen and 3 g of hydrogen confined in a total volume of one litre at 0°C. (MLNR 1991)

Solution.

Answer: 36.4 atm. Corrected: the book answer 25.18 atm does not match the given data. n(O2) = 4/32 = 0.125 mol; n(H2) = 3/2 = 1.5 mol; ntotal = 1.625 mol. P = ntotalRT/V = 1.625 × 0.0821 × 273/1 = 36.4 atm.
Hint (book): Determine total number of moles and then apply PV = ntotalRT.

Teacher's Note: Add moles of both gases and apply PV = ntotalRT with V = 1 L.

Exam Note: H2 molar mass is 2, so 3 g is 1.5 mol.

Practice Problem 25. A gas cylinder contains 55% nitrogen, 20% oxygen and 25% carbon dioxide by mass, at 760 mm pressure. Calculate the partial pressure of each gas.

Solution.

Answer: 472.8 mm, 150.44 mm, 136.74 mm (N2, O2, CO2 respectively). Check per 100 g: 1.964, 0.625 and 0.568 mol, total 3.157 mol, giving 472.8, 150.4 and 136.7 mm.

Teacher's Note: Convert mass per cent to moles, get mole fractions, then multiply each by total pressure.

Exam Note: Mole fraction, not mass fraction, gives partial pressure.

Practice Problem 26. The density of a mixture of N2 and O2 at NTP is 1.3 g L−1. Calculate partial pressure of O2.

Solution.

Answer: 0.28 atm.
Hint: Let n1 and n2 moles of N2 and O2 be present. Average molecular mass M = (28n1 + 32n2)/(n1 + n2) ... (i). Also M = (D/P)RT = 1.3 × 0.0821 × 273 = 29.137 ... (ii). So (28n1 + 32n2)/(n1 + n2) = 29.137, i.e. 4n2/(n1 + n2) = 1.137, or n2/(n1 + n2) = 0.28 = mole fraction of oxygen. Partial pressure of O2 = 0.28 × 1 = 0.28 atm.

Teacher's Note: Average M from density gives mole fraction of O2; p = x × total pressure of 1 atm.

Exam Note: NTP total pressure is 1 atm.

Practice Problem 27. At a definite pressure and temperature, 100 mL of hydrogen diffused in 20 minute. How long will 40 mL of oxygen take to diffuse under similar conditions?

Solution.

Answer: 32 minute. Check: rate(H2) = 5 mL/min; rate(O2) = 5 × √(2/32) = 1.25 mL/min; time = 40/1.25 = 32 min.

Teacher's Note: Graham's law gives O2 rate one-quarter of H2; divide volume by rate.

Exam Note: Compare volume per minute, not time directly.

Practice Problem 28. At a given temperature and pressure, 20 mL of air diffused through a porous membrane in 15 second. Calculate the volume of carbon dioxide which will diffuse in 10 second if the vapour density of air is 14.48.

Solution.

Answer: 10.8 mL. Check: M(air) = 2 × 14.48 = 28.96; rate(air) = 20/15 = 1.333 mL/s; rate(CO2) = 1.333 × √(28.96/44) = 1.082 mL/s; volume in 10 s = 10.8 mL.

Teacher's Note: Molar mass = 2 × vapour density; Graham's law gives CO2 rate.

Exam Note: Convert vapour density to molar mass first.

Practice Problem 29. At room temperature, ammonia gas at one atmospheric pressure and hydrogen chloride at P atmospheric pressure are allowed to effuse through identical pinholes from opposite ends of a glass tube of one metre length and uniform cross section. NH4Cl is first formed at a distance of 60 cm from the end through which HCl gas is sent in. What is the value of P?

Solution.

Answer: 2.198 atm.
Hint: rHCl/rNH3 = √(MNH3/MHCl) × (PHCl/PNH3). Check: HCl travels 60 cm and NH3 travels 40 cm, so ratio = 1.5 = √(17/36.5) × P, giving P = 1.5/0.6825 = 2.198 atm.

Teacher's Note: Distances covered in equal time give rate ratio 60 : 40; rate also scales with pressure and 1/√M.

Exam Note: Include the pressure factor in Graham's law here.

Practice Problem 30. The rate of effusion of an unknown gas (X) through a pinhole is found to be 0.279 times the rate of effusion of hydrogen gas through the same pinhole, if both are at STP. What is the molecular mass of the unknown gas? [CEE (Bihar) 1991]

Solution.

Answer: 25.69. Check: 0.279 = √(2/M), so M = 2/0.2792 = 25.69.

Teacher's Note: Graham's law at the same T and P: rate ratio = √(MH2/MX).

Exam Note: Square the rate ratio before inverting.

Practice Problem 31. In a 2 m long narrow tube, HCl is allowed to diffuse in the tube from one end and NH3 from the other end. If diffusion is started at the same time, predict at what point the white fumes of NH4Cl will form?

Solution.

Answer: NH4Cl will form at 1.1886 m from the NH3 end of the tube. Check: d(NH3)/d(HCl) = √(36.5/17) = 1.4653, so d(NH3) = 2 × 1.4653/2.4653 = 1.1887 m.

Teacher's Note: Both gases diffuse for equal time, so distances are in the ratio of their rates.

Exam Note: Measure the distance from the NH3 end.

Practice Problem 32. The composition of air is approximately 80% N2 and 20% O2 by mass. Calculate density of air at 293 K and 76 cm Hg pressure.

Solution.

Answer: 1.19 g L−1.
Hint: Determine first average molecular mass of air and then apply D = PMav/RT. Check: Mav = 1/(0.8/28 + 0.2/32) = 28.72; D = 28.72/(0.0821 × 293) = 1.19 g L−1.

Teacher's Note: Composition is by mass, so average molar mass uses harmonic form 1/Σ(w/M).

Exam Note: Do not average M using mass fractions directly.

Practice Problem 33. Calculate the internal energy of one gram mole of nitrogen at 150°C assuming it to be an ideal gas.

Solution.

Answer: 5.275 × 1010 erg. Check: U = (3/2)RT = 1.5 × 8.314 × 423 = 5275 J = 5.275 × 1010 erg.

Teacher's Note: Ideal-gas translational internal energy per mole is (3/2)RT; 1 J = 107 erg.

Exam Note: Use T = 423 K and convert J to erg.

Practice Problem 34. Calculate the kinetic energy of 5 mole of a gas at 27°C in erg and calorie.

Solution.

Answer: 1.8706 × 1011 erg, 4477 cal. Check: KE = 1.5 × 5 × 8.314 × 300 = 18706 J = 1.8706 × 1011 erg (about 4471 cal with 1 cal = 4.184 J).

Teacher's Note: Total translational KE = (3/2)nRT; convert units afterwards.

Exam Note: Show erg and calorie values both.

Practice Problem 35. A glass tumbler containing 243 mL of air at 100 kPa and 20°C is turned upside down and immersed in a water bath to a depth of 20.5 metre. The air in the glass is compressed by the weight of water above it. Calculate the volume of air in the glass assuming the temperature and the barometric pressure have not changed.

Solution.

Answer: 80.7 mL.
Hint: Hydrostatic pressure = h × d × g = 20.5 × 1 × 9.81 = 201.105 kPa. Inside the water bath atmospheric pressure and hydrostatic pressure act: Ptotal = 100 + 201.105 = 301.105 kPa. 100 × 243 = 301.105 × V2, V2 = 80.70 mL.

Teacher's Note: Add hydrostatic pressure to atmospheric pressure, then use Boyle's law.

Exam Note: Do not forget the 100 kPa atmospheric term.

Practice Problem 36. Calculate the rms speed of the molecules of ethane gas of volume 1.5 litre at 750 mm of Hg pressure.

Solution.

Answer: 1.225 × 104 cm/sec. (Interpretation needing a human check: the printed answer is obtained from u = √(3PV/M) taking one mole, 30 g, of ethane in 1.5 L at 750 mm Hg: 3 × 9.997 × 105 × 1500/30 gives u2 = 1.50 × 108 cm2/s2. The statement does not give the amount of gas.)

Teacher's Note: Use urms = √(3PV/M) for one mole; pressure must be in dyne/cm2.

Exam Note: Use CGS units to get cm/s.

Practice Problem 37. The density of a gas at 1.5 atm is 1.52 g L−1. Calculate the rms speed of the molecules of the gas.

Solution.

Answer: 5.476 × 104 cm/sec. Check: u = √(3P/d) = √(3 × 1.5 × 1.013 × 106/(1.52 × 10−3)) = 5.48 × 104 cm/s.

Teacher's Note: Use urms = √(3P/d) with P in dyne/cm2 and d in g/cm3.

Exam Note: Convert atm to dyne/cm2.

Practice Problem 38. At what temperature will the rms speed of hydrogen be the same as that of oxygen at 25°C?

Solution.

Answer: 18.62 K or −254.38°C. Check: T/2 = 298/32 gives T = 18.6 K.

Teacher's Note: Equal rms speeds mean T/M equal, so T(H2) = 298 × 2/32.

Exam Note: Give the answer in kelvin and °C.

Practice Problem 39. Calculate the average, rms and most probable speed of SO2 molecules at 27°C.

Solution.

Answer: 3.15 × 104 cm/sec, 3.419 × 104 cm/sec, 2.792 × 104 cm/sec (average, rms, most probable respectively). Check: √(8RT/πM) = 315 m/s, √(3RT/M) = 341.9 m/s, √(2RT/M) = 279.2 m/s, with M = 64 g/mol.

Teacher's Note: Use the three formulas with SI units; ratio ump : uav : urms = 1 : 1.128 : 1.224.

Exam Note: Use M in kg/mol when R = 8.314 J.

Practice Problem 40. The average speed at temperature T1 and most probable speed at T2 of CO2 gas is 9 × 104 cm/sec. Calculate the values of T1 and T2.

Solution.

Answer: 1682.5 K, 2143.4 K (T1, T2). Check: T1 = (900)2 π (0.044)/(8 × 8.314) ≈ 1683 K; T2 = (900)2(0.044)/(2 × 8.314) = 2143 K.

Teacher's Note: Solve uav = √(8RT/πM) and ump = √(2RT/M) each for T.

Exam Note: Use 900 m/s and M = 0.044 kg/mol.

Practice Problem 41. How many times would the average molecular speed of nitrogen increase as its temperature is raised from −73°C to 127°C?

Solution.

Answer: 1.414 times. Check: √(400/200) = 1.414.

Teacher's Note: Average speed is proportional to √T with T in kelvin: 200 K to 400 K.

Exam Note: Convert to kelvin before taking the ratio.

Practice Problem 42. A 4 : 1 molar mixture of He and CH4 is contained in a vessel at 20 bar pressure. Due to hole in the vessel the gas mixture leaks out. What is the composition of the mixture effusing out initially? (IIT 1994)

Solution.

Answer: 8 : 1.
Hint: Partial pressure ratio of He and CH4 is 16 : 4. For diffusion rHe/rCH4 = √(MCH4/MHe) × (pHe/pCH4); nHe/nCH4 = √(16/4) × (16/4) = 8, i.e. mole ratio of diffusion for He and CH4 is 8 : 1.

Teacher's Note: Effusion rate ratio = partial pressure ratio times √(M ratio).

Exam Note: Include both the pressure and mass factors.

Practice Problem 43. Pure O2 diffuses through an aperture in 224 second, whereas mixture of O2 and another gas containing 80% O2 diffuses from the same in 234 second. What is the molecular mass of gas?

Solution.

Answer: 46.6. Check: Mmix = 32 × (234/224)2 = 34.92; 0.8 × 32 + 0.2M = 34.92 gives M = 46.6.

Teacher's Note: Time of diffusion is proportional to √M; find mixture M, then solve the mole-weighted average.

Exam Note: Square the time ratio to get the M ratio.

Practice Problem 44. 56 g of nitrogen are confined to a 6 litre flask at 37°C. Calculate its pressure using van der Waals' equation for nitrogen. a = 4.17 atm litre2 mol−2 and b = 0.037 litre mol−1.

Solution.

Answer: 8.1175 atm. Check: n = 2; P = nRT/(V − nb) − an2/V2 = 2 × 0.0821 × 310/5.926 − 4.17 × 4/36 ≈ 8.13 atm.

Teacher's Note: Moles = 56/28 = 2; use P = nRT/(V − nb) − an2/V2.

Exam Note: Apply n2 in the a-term and nb in the volume term.

Practice Problem 45. One mole of carbon dioxide was found to occupy a volume of 1.32 litre at 48°C under a pressure of 16.4 atm. Calculate the pressure that would have been expected from: (i) the ideal gas equation, (ii) van der Waals' equation. (a = 3.59 atm litre2 mol−2; b = 4.27 × 10−2 litre mol−1 and R = 0.0821 litre-atm K−1 mol−1)

Solution.

Answer: (i) 19.96 atm (ii) 18.64 atm. Corrected: (ii) P = RT/(V − b) − a/V2 = 26.354/1.2773 − 3.59/1.7424 = 20.634 − 2.060 = 18.57 atm (book prints 18.64 atm). Part (i): P = 0.0821 × 321/1.32 = 19.96 atm.

Teacher's Note: Ideal pressure exceeds van der Waals pressure here, since attraction (a) outweighs volume correction effects.

Exam Note: Convert 48°C to 321 K; keep b = 0.0427.

Practice Problem 46. Calculate the compressibility factor for SO2, if 1 mole of it occupies 0.35 litre at 300 K and 50 atm pressure. Comment on the result.

Solution.

Answer: Z = 0.711.
Hint: Z = PV/nRT = (50 × 0.35)/(1 × 0.0821 × 300) = 0.711. Since Z < 1, the gas SO2 will be more compressible than ideal gas.

Teacher's Note: Z = PV/nRT; Z < 1 means attractive forces dominate.

Exam Note: State that Z < 1 means more compressible than ideal.

Practice Problem 47. The average velocity of gas molecules is 400 m/sec. Calculate its rms velocity at the same temperature. (IIT 2003)

Solution.

Answer: 434 m/sec. Check: urms/uav = √(3π/8) = 1.0854, so 400 × 1.0854 = 434.1 m/s.

Teacher's Note: Ratio of rms to average speed is the fixed number √(3π/8) = 1.085.

Exam Note: Quote the ratio √(3π/8).

Practice Problem 48. A chamber contains monoatomic 'He' at STP, determine its number density.

Solution.

Answer: 2.68 × 1025 m−3.
Hint: Number density = P/kT (k = Boltzmann constant). Number density = (1.01 × 105)/(1.38 × 10−23 × 273) = 2.68 × 1025 m−3.

Teacher's Note: From PV = NkT, number density N/V = P/kT.

Exam Note: Use SI units and 273 K.

Practice Problem 49. Two perfect gases at absolute temperature T1 and T2 are mixed. There is no loss of energy. Find the temperature of the mixture if masses of molecules are m1 and m2 and the number of moles of the gases are n1 and n2 respectively.

Solution.

Answer: T = (n1T1 + n2T2)/(n1 + n2).
Hint: Let final temperature be T. (3/2)n1RT1 + (3/2)n2RT2 = (3/2)(n1 + n2)RT, so T = (n1T1 + n2T2)/(n1 + n2).

Teacher's Note: No energy loss means total kinetic energy (3/2)nRT is conserved on mixing.

Exam Note: The masses m1, m2 cancel out.

Practice Problem 51. The speed of ten particles is in metre/sec 0, 1, 2, 3, 3, 3, 4, 4, 5 and 6. Find (a) average speed (b) the root mean square speed (c) most probable speed.

Solution.

Answer: (a) cav = 3.1 m/sec; (b) crms = 3.54 m/sec; (c) cmp = 3 m/sec. Corrected: the book prints crms = 12.5 m sec−1, which is the mean square speed. Sum of speeds = 31, mean = 3.1. Sum of squares = 125, mean square = 12.5, so crms = √12.5 = 3.54 m/s. The most common speed is 3 m/s.

Teacher's Note: Average = Σc/N; rms = √(Σc2/N); most probable is the most frequent speed.

Exam Note: Take the square root of mean square speed.

Practice Problem 52. Using van der Waals' equation, calculate the constant 'a' when two moles of a gas confined in a four litre flask exerts a pressure of 11 atm at a temperature of 300 K. The value of 'b' is 0.05 litre mol−1. (IIT 1998)

Solution.

Answer: 6.46 atm litre2 mol−2. Check: (P + an2/V2)(V − nb) = nRT; V − nb = 3.9; with R = 0.082, 49.2/3.9 = 12.615, so a = (12.615 − 11) × 4 = 6.46.

Teacher's Note: Rearrange van der Waals equation for a with n = 2, V − nb = 3.9 L.

Exam Note: Use n2 = 4 in the pressure-correction term.

Practice Problem 53. (a) Calculate the pressure exerted by 5 moles of CO2 in one litre vessel at 47°C using van der Waals' equation. Also, report the pressure of the gas if it behaves ideally in nature. Given that a = 3.592 atm litre2 mol−2, b = 0.0427 litre mol−1. (IIT 2002)
(b) If volume occupied by CO2 is negligible, calculate the pressure exerted by one mole of CO2 gas at 273 K. (IIT 2000)

Solution.

Answer: (a) 77.218 atm, 131.36 atm and (b) 0.9922 atm.
Check: (a) P = nRT/(V − nb) − an2/V2 = 5 × 0.0821 × 320/0.7865 − 3.592 × 25 = 167.0 − 89.8 = 77.2 atm; ideal P = 5 × 0.0821 × 320 = 131.36 atm. (b) With b neglected and V = 22.4 L: P = RT/V − a/V2 = 0.9994 − 0.0072 = 0.9922 atm (using R = 0.082). The statement does not give the volume; V = 22.4 L is the interpretation that reproduces the printed answer.

Teacher's Note: Compare van der Waals and ideal pressure to see the large effect of a and b at high density.

Exam Note: Use T = 320 K and n2 = 25 in the a-term.

Practice Problem 54. A compound alloy of gold and copper crystallises in a cubic lattice in which gold atoms occupy corners of cubic unit cell and copper atoms occupy the centre of faces of cube. What is formula of alloy compound?

Solution.

Answer: AuCu3. Check: Au = 8 × 1/8 = 1; Cu = 6 × 1/2 = 3.

Teacher's Note: Corner atom contributes 1/8 and face-centre atom 1/2 to the unit cell.

Exam Note: Count per-cell atoms, then write simplest ratio.

Practice Problem 55. A compound formed by elements A and B crystallises in the cubic structure where A atoms are at the corners of the cube and B atoms at the centre of the cube. What is the formula of the compound?

Solution.

Answer: AB. Check: A = 8 × 1/8 = 1; B = 1 at body centre.

Teacher's Note: Corner sites give one A per cell; the body centre gives one B.

Exam Note: Show the atom count for each element.

Practice Problem 56. A fcc element (atomic mass = 60) has a cell edge of 400 pm. What is its density?

Solution.

Answer: 6.23 g cm−3.
Hint: Apply density = ZM/(N0V), Z = 4 and V = (4 × 10−8)3 cm3 (1 pm = 10−12 m = 10−10 cm). Check: 4 × 60/(6.023 × 1023 × 6.4 × 10−23) = 6.23.

Teacher's Note: Use ρ = ZM/(NAa3) with Z = 4 for fcc and a in cm.

Exam Note: Convert pm to cm: 1 pm = 10−10 cm.

Practice Problem 57. The face-centred unit cell of nickel has an edge length of 352.39 pm. The density of nickel is 8.9 g cm−3. Calculate the value of Avogadro's number. The atomic mass of nickel is 58.7 and 1 pm is equal to 10−10 cm.

Solution.

Answer: 6.029 × 1023. Check: N0 = ZM/(ρa3) = 4 × 58.7/(8.9 × (3.5239 × 10−8)3) = 6.03 × 1023.

Teacher's Note: Rearrange ρ = ZM/(NAa3) for NA with Z = 4.

Exam Note: Convert edge length to cm before cubing.

Practice Problem 58. The unit cell of aluminium is a cube with an edge length of 405 pm. The density of aluminium is 2.70 g cm−3. What type of unit cell of aluminium is?

Solution.

Answer: The unit cell is face-centred.
Hint: Apply the formula, density = ZM/(N0 × V) and find the value of Z. Check: Z = 2.70 × 6.022 × 1023 × (4.05 × 10−8)3/27 = 4.0, so fcc.

Teacher's Note: Compute Z from density; Z = 4 means fcc, 2 means bcc, 1 means simple cubic.

Exam Note: Use M(Al) = 27 g/mol and a in cm.

Practice Problem 59. A substance forms face-centred cubic crystals. Its density is 1.984 g cm−3 and the edge length of the cell is 630 pm. Calculate the molar mass of the substance.

Solution.

Answer: 74.70 g mol−1. Check: M = ρN0a3/Z = 1.984 × 6.022 × 1023 × (6.3 × 10−8)3/4 = 74.7.

Teacher's Note: Solve ρ = ZM/(NAa3) for M with Z = 4.

Exam Note: Cube the edge length in cm.

Practice Problem 60. Molybdenum forms body-centred cubic crystals whose density is 10.3 g cm−3. Calculate the edge length of the unit cell. The molar mass of Mo is 95.94 g mol−1.

Solution.

Answer: 313.9 pm. Check: a3 = 2 × 95.94/(10.3 × 6.022 × 1023) = 3.093 × 10−23 cm3, so a = 3.139 × 10−8 cm = 313.9 pm.

Teacher's Note: bcc means Z = 2; take the cube root of ZM/(ρNA).

Exam Note: Convert cm to pm at the end.

Practice Problem 61. An element crystallises in a structure having a fcc unit cell of an edge 200 pm. Calculate its density if 200 g of this element contains 24 × 1023 atoms.

Solution.

Answer: 41.67 g cm−3. Corrected: the book prints 4.166 g cm−3, but its own working gives 41.66.
Hint: Molar mass = (200/(24 × 1023)) × 6.023 × 1023 = 50.19 g mol−1. For fcc, Z = 4, V = a3 = (200 × 10−10 cm)3 = 8 × 10−24 cm3. Density = ZM/(N0V) = 4 × 50.19/(6.023 × 1023 × 8 × 10−24) = 41.67 g cm−3.

Teacher's Note: First get M from atoms in 200 g, then use ρ = ZM/(NAa3).

Exam Note: Watch the power of ten: a3 = 8 × 10−24 cm3.

Practice Problem 62. The element chromium exists in bcc lattice with unit cell edge 2.88 × 10−10 m. The density of chromium is 7.2 × 103 kg m−3. How many atoms does 52 × 10−3 kg of chromium contain?

Solution.

Answer: 6.04 × 1023. Check: M = ρN0a3/2 = 7.2 × 6.022 × 1023 × (2.88 × 10−8)3/2 = 51.8 g/mol; atoms = (52/51.8) × 6.022 × 1023 = 6.04 × 1023.

Teacher's Note: Get M from the cell data (bcc, Z = 2), then atoms = (mass/M) × NA.

Exam Note: Convert m and kg m−3 to cm and g cm−3.

Practice Problem 63. A cubic solid is made up of two elements P and Q. Atoms Q are present at the corners of the cube and atoms P at the body-centre. What is the formula of the compound? What are the coordination numbers of P and Q?

Solution.

Answer: PQ, 8, 8. Check: Q = 8 × 1/8 = 1; P = 1 at the body centre; each ion is surrounded by 8 of the other kind.

Teacher's Note: Count atoms per cell for the formula; coordination number is the nearest unlike neighbours.

Exam Note: Give formula and both coordination numbers.

Practice Problem 64. A metallic element crystallises into a lattice containing a sequence of layers of AB AB AB ... Any packing of spheres leaves out voids in the lattice. What percentage by volume of this lattice is empty space? (IIT 1996)

Solution.

Answer: 26%. Check: ABAB... is hexagonal close packing with packing efficiency 74%, so empty space = 100 − 74 = 26%.

Teacher's Note: ABAB layering is hcp, which fills 74% of the volume.

Exam Note: Answer empty space, not packing fraction.

Practice Problem 65. A lead(II) sulphide crystal has an NaCl structure. What is its density? The edge length of the unit cell is 500 pm. N0 = 6.023 × 1023; atomic mass: Pb = 207.2, S = 32.

Solution.

Answer: 12.708 g cm−3. Check: Z = 4 formula units, M = 239.2; ρ = 4 × 239.2/(6.023 × 1023 × (5 × 10−8)3) = 12.708.

Teacher's Note: NaCl type has Z = 4 formula units per cell; M is the formula mass of PbS.

Exam Note: Use formula mass 239.2 and Z = 4.

Practice Problem 66. The unit cell of metallic gold is face-centred cubic. (a) How many atoms occupy the gold unit cell? (b) What is the mass of a gold unit cell?

Solution.

Answer: (a) 4 atoms (b) 1.308 × 10−21 g. Check: mass = 4 × 197/(6.022 × 1023) = 1.308 × 10−21 g (atomic mass of Au taken as 197).

Teacher's Note: fcc has 8 × 1/8 + 6 × 1/2 = 4 atoms; cell mass = 4M/NA.

Exam Note: Cell mass = 4 × atomic mass/NA.

Practice Problem 67. Polonium crystallises in a simple cubic unit cell. It has atomic mass 209 and density 91.5 kg m−3. What is the edge length of its unit cell?

Solution.

Answer: 15.59 × 10−8 cm. Check (with the printed density 91.5 kg m−3 = 0.0915 g cm−3): a3 = 209/(6.022 × 1023 × 0.0915) = 3.79 × 10−21 cm3, a = 1.559 × 10−7 cm.

Teacher's Note: Simple cubic has Z = 1, so a3 = M/(NAρ).

Exam Note: Convert kg m−3 to g cm−3 first.

Practice Problem 68. The unit cell of nickel is a face-centred cube. The length of its side is 0.352 nm. Calculate the atomic radius of nickel.

Solution.

Answer: 0.124 nm. Check: r = a/(2√2) = 0.352/2.828 = 0.1245 nm.

Teacher's Note: In fcc atoms touch along the face diagonal, so 4r = a√2.

Exam Note: Use r = a/(2√2) for fcc.

Practice Problem 69. Determine the simplest formula of an ionic compound in which cations are present at the corners and the anions occupy at the centre of each face.

Solution.

Answer: AB3; A and B are cation and anion respectively. Check: A = 8 × 1/8 = 1; B = 6 × 1/2 = 3.

Teacher's Note: Corner contributes 1/8 and face centre 1/2 per cell.

Exam Note: Show the counts 1 : 3.

Practice Problem 70. Sodium metal crystallises in a body-centred cubic lattice with cell edge, a = 4.29 Å. What is the radius of sodium atom? (IIT 1994)

Solution.

Answer: 1.8576 Å.
Hint: 4r = √3 a. Check: r = 1.732 × 4.29/4 = 1.857 Å.

Teacher's Note: In bcc atoms touch along the body diagonal, so 4r = √3 a.

Exam Note: Write 4r = √3a explicitly.

Practice Problem 71. If three elements P, Q and R crystallise in a cubic type lattice with P atoms at the corners, Q atoms at the cube centre and R atoms at the edges, then write the formula of the compound.

Solution.

Answer: PQR3. Check: P = 8 × 1/8 = 1; Q = 1; R = 12 × 1/4 = 3.

Teacher's Note: Edge atoms are shared by four cells, so each contributes 1/4.

Exam Note: Edge-centre atoms count 1/4 each.

Practice Problem 72. The first order reflection of the beam of X-ray from a given crystal occurs at 5°15′. At what angle will be the third order reflection?

Solution.

Answer: 15°56′. Check: sin θ3 = 3 sin 5.25° = 0.2744, so θ3 = 15.93° = 15°56′.

Teacher's Note: Bragg's law nλ = 2d sinθ: sinθ rises in proportion to n.

Exam Note: Multiply sinθ (not θ) by 3.

Objective Questions: Set-1 (Single Correct Answer)

Set-1 Question 1. At constant temperature, the product of pressure and volume of a given amount of a gas is constant. This is:
(a) Gay-Lussac law (b) Charles' law (c) Boyle's law (d) Pressure law

Solution.

Answer: (c) Boyle's law. PV = constant at fixed T and n is Boyle's law.

Teacher's Note: Boyle: P ∝ 1/V at constant T; Charles: V ∝ T.

Exam Note: Match the law to the variable held constant.

Set-1 Question 2. A curve drawn at constant temperature is called an isotherm. This shows the relationship between:
(a) P and 1/V (b) PV and V (c) V and 1/P (d) P and V

Solution.

Answer: (d) P and V. An isotherm is the P–V curve at constant T.

Teacher's Note: The book accepts P against V as the isotherm relation.

Exam Note: Isotherm means constant-temperature curve.

Set-1 Question 3. Charles' law is represented mathematically as:
(a) Vt = KV0t (b) Vt = KV0/t (c) Vt = V0(1 + 273/t) (d) Vt = V0(1 + t/273)

Solution.

Answer: (d) Vt = V0(1 + t/273). Volume rises by V0/273 per °C.

Teacher's Note: Each degree adds V0/273, with t in °C.

Exam Note: Write Vt = V0(1 + t/273).

Set-1 Question 4. Correct gas equation is: [UGET (Manipal Medical) 2006]
(a) P1V1/(P2V2) = T1/T2 (b) V1T2/P1 = V2T1/P2 (c) P1T1/V1 = P2T2/V2 (d) V1V2/(T1T2) = P1P2

Solution.

Answer: (a) P1V1/(P2V2) = T1/T2. This is P1V1/T1 = P2V2/T2 rearranged.

Teacher's Note: Combined gas law: PV/T is constant for fixed n.

Exam Note: Check that T sits beside PV.

Set-1 Question 5. In general gas equation, PV = nRT, V is the volume of:
(a) n moles of a gas (b) any amount of a gas (c) one mole of a gas (d) one gram of a gas

Solution.

Answer: (a) n moles of a gas. V is the volume of the n moles considered.

Teacher's Note: n appears in PV = nRT, so V is for n moles.

Exam Note: State V refers to n moles.

Set-1 Question 6. In the equation of state of an ideal gas PV = nRT, the value of universal gas constant would depend only on: (CPMT 1991)
(a) the nature of the gas (b) the units of measurement (c) the pressure of the gas (d) the temperature of the gas

Solution.

Answer: (b) the units of measurement. R is universal; only its units change its number.

Teacher's Note: R is the same for all gases; units change its number.

Exam Note: Quote R = 0.0821 L atm or 8.314 J.

Set-1 Question 7. The value of gas constant per degree per mole is approximately:
(a) 1 cal (b) 2 cal (c) 3 cal (d) 4 cal

Solution.

Answer: (b) 2 cal. R = 1.987 cal K−1 mol−1 ≈ 2 cal.

Teacher's Note: Remember R as 0.0821, 8.314 and 1.987 in three units.

Exam Note: Quote R ≈ 2 cal K−1 mol−1.

Set-1 Question 8. Which one of the following is not the value of R?
(a) 1.99 cal K−1 mol−1 (b) 0.0821 litre-atm K−1 mol−1 (c) 9.8 kcal K−1 mol−1 (d) 8.3 J K−1 mol−1

Solution.

Answer: (c) 9.8 kcal K−1 mol−1. R is about 2 cal, not 9.8 kcal.

Teacher's Note: 9.8 kcal is a thousand times too large for R.

Exam Note: Check units and magnitude of each option.

Set-1 Question 9. One litre of a gas collected at NTP will occupy at 2 atmospheric pressure and 27°C:
(a) 300/(2 × 273) litre (b) (2 × 300)/273 litre (c) 273/(2 × 300) litre (d) (2 × 273)/300 litre

Solution.

Answer: (a) 300/(2 × 273) litre. V = 1 × (1/2) × (300/273) litre.

Teacher's Note: Pressure doubling halves V; the rise to 300 K increases it.

Exam Note: Invert pressure ratio, keep temperature ratio.

Set-1 Question 10. 10 g of a gas at atmospheric pressure is cooled from 273°C to 0°C keeping the volume constant; its pressure would become:
(a) 1/2 atm (b) 1/273 atm (c) 2 atm (d) 273 atm

Solution.

Answer: (a) 1/2 atm. P2 = 1 × 273/546 = 1/2 atm.

Teacher's Note: At constant V, P ∝ T in kelvin: 546 K to 273 K.

Exam Note: Convert 273°C to 546 K first.

Set-1 Question 11. 56 g of nitrogen and 96 g of oxygen are mixed isothermally and a total pressure of 10 atm. The partial pressures of oxygen and nitrogen (in atm) respectively are: [PET (Kerala) 2010]
(a) 4, 6 (b) 5, 5 (c) 2, 8 (d) 8, 2 (e) 6, 4

Solution.

Answer: (e) 6, 4. Corrected: the printed key gives (a) 4, 6, but the book's own hint gives p(N2) = 4 atm and p(O2) = 6 atm; with oxygen first the answer is (e) 6, 4. n(N2) = 2, n(O2) = 3; p(N2) = (2/5) × 10 = 4 atm and p(O2) = 6 atm.

Teacher's Note: Partial pressure = mole fraction × total pressure.

Exam Note: Check order asked: oxygen first, then nitrogen.

Set-1 Question 12. 273 mL of a gas at STP was taken to 27°C and 600 mm pressure. The final volume of the gas would be: (CPMT 1992)
(a) 273 mL (b) 300 mL (c) 380 mL (d) 586 mL

Solution.

Answer: (c) 380 mL. V = 273 × (300/273) × (760/600) = 380 mL.

Teacher's Note: Use the combined gas law from 760 mm, 273 K to 600 mm, 300 K.

Exam Note: STP means 760 mm and 273 K.

Set-1 Question 13. The density of the gas is equal to: (CBSE 1991)
(a) nP (b) MP/RT (c) P/RT (d) M/V

Solution.

Answer: (b) MP/RT. From PV = (w/M)RT, d = w/V = PM/RT.

Teacher's Note: Density follows from PV = nRT with n = w/M.

Exam Note: Derive d = MP/RT.

Set-1 Question 14. The density of a gas is 1.964 g dm−3 at 273 K and 76 cm Hg. The gas is: (KCET 2006)
(a) CH4 (b) C2H6 (c) CO2 (d) Xe

Solution.

Answer: (c) CO2. M = 1.964 × 22.4 = 44 g/mol: CO2.

Teacher's Note: At STP, molar mass = density × 22.4 L.

Exam Note: Use M = d × 22.4 at STP.

Set-1 Question 15. Compressed oxygen is sold at a pressure of 100 atmosphere in a cylinder of 49 litre. The number of moles of oxygen in the cylinder is:
(a) 400 (b) 100 (c) 300 (d) 200

Solution.

Answer: (d) 200. Hint: one mole occupies about 24.5 litre. At 1 atm the gas would occupy 4900 L, so n = 4900/24.5 = 200.

Teacher's Note: Convert to 1 atm volume, then divide by 24.5 L.

Exam Note: Use the given molar volume 24.5 L.

Set-1 Question 16. If the pressure and absolute temperature of 2 litre of carbon dioxide are doubled, the volume of carbon dioxide would become: (CBSE 1991)
(a) 7 litre (b) 5 litre (c) 4 litre (d) 2 litre

Solution.

Answer: (d) 2 litre. V ∝ T/P, so doubling both leaves V at 2 litre.

Teacher's Note: Both changes cancel since V ∝ T/P.

Exam Note: Compare T/P before and after.

Set-1 Question 17. One gram mole of a gas at NTP occupies 22.4 litre as volume. This fact was derived from:
(a) Dalton's theory (b) Avogadro's hypothesis (c) Berzelius hypothesis (d) law of gaseous volumes

Solution.

Answer: (b) Avogadro's hypothesis. Equal volumes hold equal molecules, so a mole has a fixed molar volume.

Teacher's Note: Molar volume at NTP comes from Avogadro's hypothesis.

Exam Note: Link molar volume to equal volumes, equal molecules.

Set-1 Question 18. 4.4 g of CO2 contains how many litre of CO2 at STP? (AFMC 2004)
(a) 2.4 litre (b) 2.24 litre (c) 44 litre (d) 22.4 litre

Solution.

Answer: (b) 2.24 litre. n = 4.4/44 = 0.1 mol; V = 2.24 L.

Teacher's Note: Moles times 22.4 L gives the STP volume.

Exam Note: Molar mass of CO2 is 44.

Set-1 Question 19. Five grams each of the following gases at 87°C and 750 mm pressure are taken. Which of them will have the least volume? (MLNR 1991)
(a) HF (b) HCl (c) HBr (d) HI

Solution.

Answer: (d) HI. Moles = 5/M; HI has the largest M (128), so fewest moles and least volume.

Teacher's Note: At equal mass, T and P, volume is inversely proportional to M.

Exam Note: Largest molar mass gives smallest volume.

Set-1 Question 20. If molecular mass of O2 and SO2 are 32 and 64 respectively. If one litre of O2 at 15°C and 750 mm pressure contains N molecules, the number of molecules in two litre of SO2 under the same conditions of temperature and pressure will be: (MLNR 1991)
(a) 2N (b) N (c) N/2 (d) 4N

Solution.

Answer: (a) 2N. Equal volumes hold equal molecules (Avogadro), so 2 L holds 2N.

Teacher's Note: Number of molecules depends only on volume at fixed T and P.

Exam Note: Molar mass is irrelevant here.

Set-1 Question 21. Rate of diffusion of a gas is:
(a) directly proportional to its density (b) directly proportional to its molecular mass (c) directly proportional to the square of its molecular mass (d) inversely proportional to the square root of its molecular mass

Solution.

Answer: (d) inversely proportional to the square root of its molecular mass. Graham's law: r ∝ 1/√M.

Teacher's Note: Graham's law: rate ∝ 1/√M at same T and P.

Exam Note: Quote r ∝ 1/√M.

Set-1 Question 22. The rate of diffusion of hydrogen is about: (CPMT 1991)
(a) one-half that of helium (b) 1.4 times that of helium (c) twice that of helium (d) four times that of helium

Solution.

Answer: (b) 1.4 times that of helium. r(H2)/r(He) = √(4/2) = 1.414.

Teacher's Note: Use √(MHe/MH2) = √2.

Exam Note: Take the square root of the mass ratio.

Set-1 Question 23. The rate of diffusion of methane at a given temperature is twice that of gas X. The molecular mass of X is: (IIT 1990; MLNR 1995)
(a) 64.0 (b) 32.0 (c) 4.0 (d) 8.0

Solution.

Answer: (a) 64.0. MX/16 = 22 = 4, so MX = 64.

Teacher's Note: Square the rate ratio 2 to get the mass ratio 4.

Exam Note: M ratio is the square of the rate ratio.

Set-1 Question 24. Some moles of O2 diffuse through a small opening in 18 second. Same number of moles of an unknown gas diffuse through the same opening in 45 second. Molecular mass of the unknown gas is:
(a) 32 × (45)2/(18)2 (b) 32 × (18)2/(45)2 (c) (32)2 × 45/18 (d) (32)2 × 18/45

Solution.

Answer: (a) 32 × (45)2/(18)2. t ∝ √M, so M = 32 × (45/18)2 = 200.

Teacher's Note: Time scales as √M, so M ratio is time ratio squared.

Exam Note: Larger time means larger molar mass.

Set-1 Question 25. A bottle of dry ammonia and a bottle of dry hydrogen chloride connected through a long tube are opened simultaneously at both the ends. The white ring first formed will be:
(a) at the centre of the tube (b) near the ammonia bottle (c) near the HCl bottle (d) throughout the length of the tube

Solution.

Answer: (c) near the HCl bottle. NH3 (M = 17) diffuses faster than HCl (36.5), so the ring forms nearer the HCl end.

Teacher's Note: The lighter gas travels farther, so NH4Cl forms near the HCl bottle.

Exam Note: Ring forms closer to the heavier gas.

Set-1 Question 26. 0.5 mole of each H2, SO2 and CH4 are kept in a container. A hole was made in the container. After 3 hours, the order of partial pressures in the container will be: [CET (Karnataka) 2009]
(a) pSO2 > pCH4 > pH2 (b) pH2 > pSO2 > pCH4 (c) pH2 > pCH4 > pSO2 (d) pSO2 > pH2 > pCH4

Solution.

Answer: (a) pSO2 > pCH4 > pH2. Effusion order H2 > CH4 > SO2, so the heaviest gas remains most.

Teacher's Note: Effusion rate ∝ 1/√M; the fastest gas is depleted most.

Exam Note: Fastest-effusing gas ends with lowest pressure.

Set-1 Question 27. The mass of 6.02 × 1023 molecules of CO is:
(a) 28 g (b) 14 g (c) 7.0 g (d) 56 g

Solution.

Answer: (a) 28 g. 6.02 × 1023 molecules is one mole of CO = 28 g.

Teacher's Note: One mole is NA molecules; M(CO) = 28.

Exam Note: Molar mass of CO is 12 + 16.

Set-1 Question 28. 10 g of hydrofluoric acid occupy 5.6 litre of volume at NTP. The empirical formula of the gas is HF. The molecular formula of the gas will be (At. mass of fluorine = 19):
(a) H4F4 (b) HF (c) H3F3 (d) H2F2

Solution.

Answer: (d) H2F2. n = 5.6/22.4 = 0.25, M = 40 = 2 × 20, so H2F2.

Teacher's Note: Find M from NTP volume, divide by empirical mass 20.

Exam Note: Molecular mass 40 is twice 20.

Set-1 Question 29. A fire extinguisher contains 4.4 kg of CO2. The volume of CO2 delivered by this fire extinguisher at room temperature is:
(a) 24.5 litre (b) 100 × 24.5 litre (c) 10 × 24.5 litre (d) 1000 × 24.5 litre

Solution.

Answer: (b) 100 × 24.5 litre. n = 4400/44 = 100 mol; V = 100 × 24.5 L.

Teacher's Note: Moles = 4400 g/44; molar volume at room temperature is 24.5 L.

Exam Note: Convert kg to g before dividing by 44.

Set-1 Question 30. The number of moles of H2 in 0.224 litre of hydrogen gas at STP is: (MLNR 1994)
(a) 1 (b) 0.1 (c) 0.01 (d) 0.001

Solution.

Answer: (c) 0.01. n = 0.224/22.4 = 0.01 mol.

Teacher's Note: Divide the volume by 22.4 L at STP.

Exam Note: 0.224 L is 1/100 of 22.4 L.

Set-1 Question 31. A gas has a vapour density 11.2. The volume occupied by 1 g of the gas at NTP is:
(a) 1 L (b) 11.2 L (c) 22.4 L (d) 4 L

Solution.

Answer: (a) 1 L. M = 2 × 11.2 = 22.4, so 1 g is 1/22.4 mol = 1 L.

Teacher's Note: Molar mass is 2 × vapour density.

Exam Note: M = 22.4 means 1 g occupies 1 L.

Set-1 Question 32. "The total pressure exerted by a number of non-reacting gases is equal to the sum of partial pressures of the gases under the same conditions" is known as:
(a) Boyle's law (b) Dalton's law (c) Avogadro's law (d) Charles' law

Solution.

Answer: (b) Dalton's law. This is Dalton's law of partial pressures.

Teacher's Note: Dalton: Ptotal = p1 + p2 + ... for non-reacting gases.

Exam Note: Say "non-reacting" in the statement.

Set-1 Question 33. Equal masses of methane and oxygen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by oxygen is:
(a) 1/3 (b) 1/2 (c) 2/3 (d) (1/3) × (273/298)

Solution.

Answer: (a) 1/3. n(CH4) = w/16, n(O2) = w/32; x(O2) = (1/32)/(3/32) = 1/3.

Teacher's Note: Pressure fraction equals mole fraction.

Exam Note: Temperature does not alter the fraction.

Set-1 Question 34. Equal masses of methane and hydrogen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by hydrogen is:
(a) 1/2 (b) 8/9 (c) 1/9 (d) 16/17

Solution.

Answer: (b) 8/9. n(H2) = w/2, n(CH4) = w/16; x(H2) = 8/9.

Teacher's Note: Pressure fraction is mole fraction: 8 parts H2 to 1 part CH4.

Exam Note: Use moles w/2 and w/16.

Set-1 Question 35. A gaseous mixture of 2 moles of A, 3 moles of B, 5 moles of C and 10 moles of D is contained in a vessel. Assuming that gases are ideal and the partial pressure of C is 1.5 atm, the total pressure is:
(a) 3 atm (b) 6 atm (c) 9 atm (d) 15 atm

Solution.

Answer: (b) 6 atm. Hint: 5 moles of C produce 1.5 atm, so D = 3 atm, B = 0.9 atm, A = 0.6 atm. Total = 1.5 + 3 + 0.9 + 0.6 = 6 atm.

Teacher's Note: Pressure is proportional to moles: 0.3 atm per mole.

Exam Note: Total moles are 20.

Set-1 Question 36. 50 mL of a gas A diffuse through a membrane in the same time as for the diffusion of 40 mL of gas B under identical conditions of pressure and temperature. If the molecular mass of A is 64, that of B would be: (CBSE 1992)
(a) 100 (b) 250 (c) 200 (d) 80

Solution.

Answer: (a) 100. 50/40 = √(MB/64), so MB = 64 × 25/16 = 100.

Teacher's Note: Equal time means volume ratio equals rate ratio.

Exam Note: Rate ratio 5 : 4 gives M ratio 25 : 16.

Set-1 Question 37. 3.2 g of oxygen (At. mass = 16) and 0.2 g of hydrogen (At. mass = 1) are placed in a 1.12 litre flask at 0°C. The total pressure of the gas mixture will be: (CBSE 1992)
(a) 1 atm (b) 2 atm (c) 3 atm (d) 4 atm

Solution.

Answer: (d) 4 atm. n(O2) = 0.1, n(H2) = 0.1; P = 0.2 × 22.4/1.12 = 4 atm.

Teacher's Note: Total moles 0.2 in 1.12 L at 0°C gives P = nRT/V.

Exam Note: Use molecular masses 32 and 2.

Set-1 Question 38. Select the correct statement: In the gas equation, PV = nRT (CBSE 1992)
(a) n is the number of molecules of a gas (b) n moles of the gas have volume V (c) V denotes volume of one mole (d) P is the pressure of the gas when only one mole of gas is present

Solution.

Answer: (b) n moles of the gas have volume V. n moles of gas occupy volume V at pressure P.

Teacher's Note: n counts moles, not molecules.

Exam Note: n is moles, not molecules.

Set-1 Question 39. The density of a gas at 27°C and 1 atm is d. Pressure remaining constant, at which of the following temperatures will its density become 0.75d? (CBSE 1992)
(a) 20°C (b) 30°C (c) 400 K (d) 300 K

Solution.

Answer: (c) 400 K. At constant P, d ∝ 1/T: T = 300/0.75 = 400 K.

Teacher's Note: Density is inversely proportional to T at fixed P.

Exam Note: Divide 300 K by 0.75.

Set-1 Question 40. If 4 g of oxygen diffuse through a very narrow hole, how much hydrogen would have diffused under identical conditions? (CBSE 1992)
(a) 16 g (b) 1 g (c) 1/4 g (d) 64 g

Solution.

Answer: (b) 1 g. Hint: (w/2)/(4/32) = √(MO2/MH2) = 4, so w = 1 g.

Teacher's Note: Compare moles diffused: ratio is √(32/2) = 4.

Exam Note: Convert masses to moles first.

Set-1 Question 41. A closed vessel contains equal number of hydrogen and nitrogen molecules. The total pressure is 740 mm of Hg. If N2 molecules are removed, the pressure would become/remain:
(a) double of 740 mm of Hg (b) one-ninth of 740 mm of Hg (c) unchanged (d) one-half of 740 mm of Hg

Solution.

Answer: (d) one-half of 740 mm of Hg. Equal numbers contribute equal pressure; removing N2 leaves half, 370 mm.

Teacher's Note: Partial pressure is proportional to number of molecules.

Exam Note: Equal moles each give half the pressure.

Set-1 Question 42. The pressure P exerted by a mixture of three gases having partial pressures P1, P2 and P3 is given by:
(a) P = P1 + P2 − P3 (b) P = √(P1 + P2 + P3) (c) P = P1 − P2 + P3 (d) P = P1 + P2 + P3

Solution.

Answer: (d) P = P1 + P2 + P3. Dalton's law: partial pressures add.

Teacher's Note: Dalton's law is simple addition of partial pressures.

Exam Note: State Dalton's law in symbols.

Set-1 Question 43. Two sealed containers of same capacity at the same temperature are filled with 44 g of hydrogen gas in one and 44 g of CO2 in the other. If the pressure of CO2 container is 1 atm, what is the pressure in the hydrogen container?
(a) 1 atm (b) Zero atm (c) 22 atm (d) 44 atm

Solution.

Answer: (c) 22 atm. n(H2) = 22, n(CO2) = 1; same V and T, so 22 atm.

Teacher's Note: Same V and T: pressure is proportional to moles.

Exam Note: H2 molar mass 2, CO2 44.

Set-1 Question 44. Absolute zero is the temperature where all gases are expected to have:
(a) different volumes (b) same volume (c) zero volume (d) none of these

Solution.

Answer: (c) zero volume. Extrapolating V = V0(1 + t/273) to −273°C gives V = 0.

Teacher's Note: Charles' law lines extrapolate to zero volume at −273°C.

Exam Note: Say the volume extrapolates to zero.

Set-1 Question 45. If a gas is heated at constant pressure, its density:
(a) will decrease (b) will increase (c) may increase or decrease (d) will remain unchanged

Solution.

Answer: (a) will decrease. V rises with T at constant P, so d = m/V falls.

Teacher's Note: At constant P, d ∝ 1/T.

Exam Note: State V increases while mass is fixed.

Set-1 Question 46. Density of neon will be highest at:
(a) STP (b) 0°C, 2 atm (c) 273°C, 1 atm (d) 273°C, 2 atm

Solution.

Answer: (b) 0°C, 2 atm. d ∝ P/T: the highest P/T is 2 atm at 273 K.

Teacher's Note: Compare P/T for each option.

Exam Note: Use d ∝ P/T with T in kelvin.

Set-1 Question 47. Equal masses of ethane and hydrogen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by hydrogen is: (IIT 1993)
(a) 1 : 2 (b) 1 : 1 (c) 1 : 16 (d) 15 : 16

Solution.

Answer: (d) 15 : 16. n(H2) = w/2, n(C2H6) = w/30; x(H2) = (1/2)/(1/2 + 1/30) = 15/16.

Teacher's Note: Pressure fraction equals mole fraction: 15 parts out of 16.

Exam Note: Ethane molar mass is 30, hydrogen 2.

Set-1 Question 48. According to kinetic theory of gases:
(a) there are intermolecular attractions (b) molecules have considerable volume (c) there is no intermolecular attraction (d) speed of molecules decreases for each collision

Solution.

Answer: (c) there is no intermolecular attraction. Ideal kinetic theory assumes no attraction between molecules.

Teacher's Note: Kinetic postulates: negligible volume, no attractions, elastic collisions.

Exam Note: List the postulates when asked.

Set-1 Question 49. Postulate of kinetic theory is:
(a) atom is indivisible (b) gases combine in simple ratio (c) there is no influence of gravity on the molecules of the gas (d) none of the above

Solution.

Answer: (c) there is no influence of gravity on the molecules of the gas. Gravity has no influence on molecular motion in the kinetic model.

Teacher's Note: Other options belong to Dalton's atomic theory and Gay-Lussac's law.

Exam Note: Identify which options belong to other laws.

Set-1 Question 50. Which of the following statements is not consistent with the postulates of kinetic theory of gases?
(a) Gases consist of large number of tiny particles (b) Particles are in constant motion (c) All the particles have same speed (d) Pressure is due to hits recorded by particles against the walls of containing vessel

Solution.

Answer: (c) All the particles have same speed. Molecules have a distribution of speeds, not one speed.

Teacher's Note: Maxwell distribution means speeds differ among molecules.

Exam Note: Mention the speed distribution.

Set-1 Question 51. A helium atom is two times heavier than a hydrogen molecule. At 298 K, the average kinetic energy of a helium atom is:
(a) two times that of a hydrogen molecule (b) four times that of a hydrogen molecule (c) half that of a hydrogen molecule (d) same as that of a hydrogen molecule

Solution.

Answer: (d) same as that of a hydrogen molecule. Average KE = (3/2)kT depends only on T, not on mass.

Teacher's Note: Average translational KE depends only on temperature.

Exam Note: Mass does not appear in (3/2)kT.

Set-1 Question 52. The kinetic theory of gases predicts that total kinetic energy of a gas depends on:
(a) pressure of the gas (b) temperature of the gas (c) volume of the gas (d) pressure, temperature and volume of the gas

Solution.

Answer: (b) temperature of the gas. KE ∝ T for a given amount of gas.

Teacher's Note: KE is proportional to absolute temperature.

Exam Note: Name temperature only.

Set-1 Question 53. If a gas is allowed to expand at constant temperature then:
(a) number of molecules of the gas decreases (b) the kinetic energy of the gas molecules decreases (c) the kinetic energy of the gas molecules increases (d) the kinetic energy of the gas molecules remains the same

Solution.

Answer: (d) the kinetic energy of the gas molecules remains the same. Constant T means constant average kinetic energy.

Teacher's Note: KE depends only on temperature.

Exam Note: Expansion at constant T leaves KE unchanged.

Set-1 Question 54. Gases deviate from ideal behaviour because molecules:
(a) are colourless (b) are spherical (c) attract each other (d) have high speeds

Solution.

Answer: (c) attract each other. Intermolecular attraction (and finite volume) cause deviation.

Teacher's Note: Real gases deviate due to attraction and finite molecular size.

Exam Note: Name attraction and volume.

Set-1 Question 55. Deviations from ideal behaviour will be more if the gas is subjected to:
(a) low temperature and high pressure (b) high temperature and low pressure (c) low temperature (d) high temperature

Solution.

Answer: (a) low temperature and high pressure. Low T and high P make attraction and volume effects significant.

Teacher's Note: Ideality needs high T and low P; deviation is the opposite.

Exam Note: State both conditions together.

Set-1 Question 56. In a closed vessel, a gas is heated from 300 K to 600 K; the kinetic energy becomes/remains as:
(a) double (b) half (c) same (d) four times

Solution.

Answer: (a) double. KE ∝ T, so doubling T doubles KE.

Teacher's Note: Average KE is proportional to T in kelvin.

Exam Note: Ratio 600/300 = 2.

Set-1 Question 57. A mixture contains 56 g of nitrogen, 44 g of CO2 and 16 g of methane. The total pressure of the mixture is 720 mm Hg. The partial pressure of methane is: (EAMCET 1991)
(a) 180 mm (b) 360 mm (c) 540 mm (d) 720 mm

Solution.

Answer: (a) 180 mm. n = 2 (N2), 1 (CO2), 1 (CH4); total 4; p(CH4) = 720/4 = 180 mm.

Teacher's Note: Mole fraction of CH4 is 1/4.

Exam Note: Convert grams to moles first.

Set-1 Question 58. The root mean square speed of an ideal gas at 27°C is 0.3 m/sec. Its rms velocity at 927°C is: (EAMCET 1991)
(a) 3.0 m/sec (b) 2.4 m/sec (c) 0.9 m/sec (d) 0.6 m/sec

Solution.

Answer: (d) 0.6 m/sec. u ∝ √T: √(1200/300) = 2, so 0.6 m/s.

Teacher's Note: rms speed scales as √T with T in kelvin.

Exam Note: Convert to 300 K and 1200 K.

Set-1 Question 59. The rms speed at NTP of the species can be calculated from the expression: (EAMCET 1990)
(a) √(3P/d) (b) √(3PV/M) (c) √(3RT/M) (d) all of these

Solution.

Answer: (d) all of these. All three are equivalent forms of urms.

Teacher's Note: Using PV = RT and d = M/V, the three forms agree.

Exam Note: Show equivalence via PM = dRT.

Set-1 Question 60. At constant volume, for a fixed number of mole of a gas, the pressure of the gas increases with rise of temperature due to:
(a) increase in average molecular speed (b) increased rate of collisions amongst molecules (c) increase in molecular attraction (d) decrease in mean free path

Solution.

Answer: (a) increase in average molecular speed. Higher temperature raises average molecular speed, so wall impacts are harder and more frequent.

Teacher's Note: Pressure rises because molecular speed rises with T.

Exam Note: State speed increase as the primary cause.

Set-1 Question 61. Non-ideal gases approach ideal behaviour: (IIT 1999; KCET 2004)
(a) high temperature and high pressure (b) high temperature and low pressure (c) low temperature and high pressure (d) low temperature and low pressure

Solution.

Answer: (b) high temperature and low pressure. High T and low P minimise attraction and volume effects.

Teacher's Note: Ideal behaviour needs high T, low P.

Exam Note: Give both conditions.

Set-1 Question 62. The ratio of root mean square speed and average speed of a gas molecule, at a particular temperature, is:
(a) 1 : 1.086 (b) 1.086 : 1 (c) 2 : 1.086 (d) 1.086 : 2

Solution.

Answer: (b) 1.086 : 1. urms/uav = √(3π/8) = 1.086.

Teacher's Note: Ratio rms : average = √(3π/8) = 1.086.

Exam Note: Remember the number 1.086.

Set-1 Question 63. Most probable speed, average speed and rms speed are related as:
(a) 1 : 1.224 : 1.128 (b) 1.128 : 1 : 1.224 (c) 1 : 1.128 : 1.224 (d) 1.224 : 1.128 : 1

Solution.

Answer: (c) 1 : 1.128 : 1.224. ump : uav : urms = √2 : √(8/π) : √3 = 1 : 1.128 : 1.224.

Teacher's Note: Order is mp < average < rms.

Exam Note: Remember 1 : 1.128 : 1.224.

Set-1 Question 64. In a closed flask of 5 litre, 1.0 g of H2 is heated from 300–600 K. Which statement is not correct? (CBSE 1991)
(a) The rate of collision increases (b) The energy of gaseous molecules increases (c) The number of mole of the gas increases (d) Pressure of the gas increases

Solution.

Answer: (c) The number of mole of the gas increases. Heating a closed flask does not change the number of moles.

Teacher's Note: Moles are fixed in a closed flask.

Exam Note: Heating changes energy and pressure, not n.

Set-1 Question 65. The root mean square speed is expressed as:
(a) [(3/2)RT]1/2 (b) [2RT/M]1/2 (c) [3RT] (d) [3RT/M]1/2

Solution.

Answer: (d) [3RT/M]1/2. urms = √(3RT/M).

Teacher's Note: Memorise √(3RT/M), √(8RT/πM), √(2RT/M).

Exam Note: Distinguish rms (3) from most probable (2).

Set-1 Question 66. The rms speed of hydrogen molecules at room temperature is 2400 m s−1. At room temperature the rms speed of oxygen molecules would be:
(a) 400 ms−1 (b) 300 ms−1 (c) 600 ms−1 (d) 1600 ms−1

Solution.

Answer: (c) 600 ms−1. Hint: CO2/CH2 = √(MH2/MO2) = 1/4, so 2400/4 = 600 m/s.

Teacher's Note: At the same T, speeds scale as 1/√M.

Exam Note: Mass ratio 16 gives speed ratio 4.

Set-1 Question 67. The molecules of which of the following gas have highest speed?
(a) Hydrogen at −50°C (b) Methane at 298 K (c) Nitrogen at 1000°C (d) Oxygen at 0°C

Solution.

Answer: (a) Hydrogen at −50°C. Speed ∝ √(T/M): hydrogen at 223 K has the largest value.

Teacher's Note: Speed depends on √(T/M); compare the ratios.

Exam Note: Light H2 beats higher temperatures of heavier gases.

Set-1 Question 68. Which of the following is an ideal gas?
(a) Hydrogen (b) Nitrogen (c) Carbon dioxide (d) None of these

Solution.

Answer: (d) None of these. No real gas is perfectly ideal.

Teacher's Note: Ideal gas is a theoretical model.

Exam Note: Say ideal gases do not exist.

Set-1 Question 69. van der Waals' equation explains the behaviour of:
(a) ideal gases (b) real gases (c) mixture of gases (d) diatomic gases

Solution.

Answer: (b) real gases. The equation corrects the ideal gas law for real gases.

Teacher's Note: vdW adds corrections for attraction (a) and volume (b).

Exam Note: Name the two corrections.

Set-1 Question 70. The critical temperature of a gas is that temperature:
(a) above which it can no longer remain in the gaseous state (b) above which it cannot be liquefied by pressure (c) at which it solidifies (d) at which the volume of the gas becomes zero

Solution.

Answer: (b) above which it cannot be liquefied by pressure. Above Tc no pressure can liquefy the gas.

Teacher's Note: Define Tc as the limit for liquefaction by pressure.

Exam Note: Say "cannot be liquefied by pressure".

Set-1 Question 71. The van der Waals' equation for a real gas is:
(a) (P + a/V2)(V − b) = nRT (b) (P + an2/V2)(V − nb) = nRT (c) (P + a/V2)(V + b) = nRT (d) P = nRT/(V − nb) − n2a/V2

Solution.

Answer: (d) P = nRT/(V − nb) − n2a/V2. Option (d) is the van der Waals equation solved for P; option (b) is the same relation unsolved, but the book key marks (d).

Teacher's Note: Options (b) and (d) are algebraically the same equation.

Exam Note: Use the key's choice when both fit.

Set-1 Question 72. In van der Waals' equation of state for a non-ideal gas, the term that accounts for intermolecular force is:
(a) (P + a/V2) (b) (V − b) (c) RT (d) 1/RT

Solution.

Answer: (a) (P + a/V2). The a/V2 term corrects pressure for intermolecular attraction.

Teacher's Note: a/V2 is the pressure correction for attraction.

Exam Note: b corrects for volume.

Set-1 Question 73. The units of 'a' in van der Waals' equation (P + an2/V2)(V − nb) = nRT are:
(a) atom litre2 mol−2 (b) atom litre mol−2 (c) atom litre mol−1 (d) atom litre2 mol−1

Solution.

Answer: (a) atom litre2 mol−2. a = PV2/n2 has units atm L2 mol−2 (the book prints "atom" for atm).

Teacher's Note: Units of a follow from P = an2/V2.

Exam Note: Write atm L2 mol−2.

Set-1 Question 74. If 1000 mL of gas A at 600 torr and 500 mL of gas B at 800 torr are placed in a 2 litre flask, the final pressure will be:
(a) 2000 torr (b) 1000 torr (c) 500 torr (d) 400 torr

Solution.

Answer: (c) 500 torr. P = (1000 × 600 + 500 × 800)/2000 = 500 torr.

Teacher's Note: Sum PiVi and divide by the new volume.

Exam Note: Keep mL for all volumes.

Set-1 Question 75. Two samples of gases A and B are at the same temperature. The molecules of A are travelling four times faster than the molecules of B. The ratio of mA/mB of their masses will be:
(a) 16 (b) 4 (c) 1/4 (d) 1/16

Solution.

Answer: (d) 1/16. At the same T, mA/mB = cB2/cA2 = 1/16.

Teacher's Note: Same T means mc2 is equal; faster molecules are lighter.

Exam Note: Square the speed ratio and invert.

Set-1 Question 76. The root mean square speed of a certain gas at 27°C is 3 × 104 cm s−1. The temperature at which the velocity will be 6 × 104 cm s−1 is:
(a) 54°C (b) 108°C (c) 1200 K (d) 600 K

Solution.

Answer: (c) 1200 K. u ∝ √T: doubling speed needs 4 × 300 = 1200 K.

Teacher's Note: Doubling rms speed requires four times the absolute temperature.

Exam Note: Work in kelvin.

Set-1 Question 77. The temperature at which real gases obey the ideal gas laws over a wide range of pressure is called: (NPMT 2009)
(a) critical temperature (b) Boyle temperature (c) inversion temperature (d) reduced temperature

Solution.

Answer: (b) Boyle temperature. At the Boyle temperature Z stays close to 1 over a wide pressure range.

Teacher's Note: At TB the second virial coefficient vanishes.

Exam Note: Quote TB = a/Rb.

Set-1 Question 78. The value of van der Waals' constant 'a' for gases O2, N2, NH3 and CH4 are 1.360, 1.390, 4.170 and 2.253 litre2-atm mol−2 respectively. The gas which can be most easily liquefied is:
(a) O2 (b) N2 (c) NH3 (d) CH4

Solution.

Answer: (c) NH3. Largest a (NH3, 4.170) means strongest attraction and easiest liquefaction.

Teacher's Note: Larger a means stronger attraction and higher Tc.

Exam Note: Link largest a to easiest liquefaction.

Set-1 Question 79. According to kinetic theory of gases for a diatomic molecule: (IIT 1991)
(a) the pressure exerted by the gas is proportional to the mean square speed of the molecules (b) the pressure exerted by the gas is proportional to the root mean square speed of the molecules (c) the root mean square speed is inversely proportional to the temperature (d) the mean translational KE of the molecule is directly proportional to the absolute temperature

Solution.

Answer: (d) the mean translational KE of the molecule is directly proportional to the absolute temperature. Mean translational KE = (3/2)kT is proportional to absolute temperature.

Teacher's Note: P is proportional to mean square speed; urms ∝ √T.

Exam Note: Pick KE ∝ T.

Set-1 Question 80. A real gas obeying van der Waals' equation will resemble an ideal gas if the:
(a) constants a and b are small (b) a is large and b is small (c) a is small and b is large (d) constants a and b are large

Solution.

Answer: (a) constants a and b are small. When a and b tend to 0 the equation reduces to PV = nRT.

Teacher's Note: Small a and b mean negligible attraction and size.

Exam Note: Set a = b = 0 to recover PV = nRT.

Set-1 Question 81. When the universal gas constant (R) is divided by Avogadro's number (N0), their ratio is called:
(a) Planck's constant (b) Rydberg's constant (c) Boltzmann's constant (d) van der Waals' constant

Solution.

Answer: (c) Boltzmann's constant. k = R/NA = 1.38 × 10−23 J K−1.

Teacher's Note: Boltzmann constant is the gas constant per molecule.

Exam Note: Quote k = 1.38 × 10−23 J K−1.

Set-1 Question 82. The compressibility factor of a gas is defined as Z = PV/RT. The compressibility factor of an ideal gas is: [PMT (MP) 2004]
(a) 0 (b) 1 (c) −1 (d) infinity

Solution.

Answer: (b) 1. For an ideal gas PV = RT, so Z = 1.

Teacher's Note: Z = 1 for an ideal gas at all P and T.

Exam Note: State Z = PV/RT = 1.

Set-1 Question 83. An ideal gas is one which obeys:
(a) gas laws (b) Boyle's law (c) Charles' law (d) Avogadro's law

Solution.

Answer: (a) gas laws. An ideal gas obeys all the gas laws at all conditions.

Teacher's Note: Ideal gas obeys Boyle, Charles and Avogadro laws together.

Exam Note: "Gas laws" covers them all.

Set-1 Question 84. A mixture of three gases X (density 1.0), Y (density 0.2) and Z (density 0.4) is enclosed in a vessel at constant temperature. When the equilibrium is established, the gas/gases:
(a) X will be at the top of the vessel (b) Y will be at the top of the vessel (c) Z will be at the top of the vessel (d) will mix homogeneously throughout the vessel

Solution.

Answer: (d) will mix homogeneously throughout the vessel. Gases mix uniformly by diffusion; density differences do not cause layering.

Teacher's Note: Gas molecules move fast, so gases form a homogeneous mixture.

Exam Note: Gases do not stratify by density.

Set-1 Question 85. 16 g of oxygen and 3 g of hydrogen are mixed and kept at 760 mm pressure at 0°C. The total volume occupied by the mixture will be nearly: [CMC (Vellore) 1991]
(a) 22.4 litre (b) 33.6 litre (c) 44800 mL (d) 4480 mL

Solution.

Answer: (c) 44800 mL. n = 0.5 + 1.5 = 2 mol; V = 2 × 22.4 = 44.8 L = 44800 mL.

Teacher's Note: Total moles times 22.4 L at STP.

Exam Note: Convert litres to mL.

Set-1 Question 86. Which of the following expressions does not represent Boyle's law?
(a) PV = constant (b) V ∝ 1/P (c) V1T2 = V2T1 (d) P1V1 = P2V2

Solution.

Answer: (c) V1T2 = V2T1. V1T2 = V2T1 is Charles' law.

Teacher's Note: V1/T1 = V2/T2 rearranges to option (c).

Exam Note: Spot the temperature term.

Set-1 Question 87. When an ideal gas undergoes unrestricted expansion, no cooling occurs because the molecules:
(a) exert no attractive forces on each other (b) do work equal to loss of kinetic energy (c) collide without loss of energy (d) are above the inversion temperature

Solution.

Answer: (a) exert no attractive forces on each other. No attraction means no work against intermolecular forces, so no cooling.

Teacher's Note: Cooling on expansion comes from work done against attraction.

Exam Note: An ideal gas has none.

Set-1 Question 88. Which of the following mixture of gases at room temperature does not follow Dalton's law of partial pressures?
(a) NO2 and O2 (b) NH3 and HCl (c) CO and CO2 (d) SO2 and O2

Solution.

Answer: (b) NH3 and HCl. NH3 and HCl react to form NH4Cl, so Dalton's law (non-reacting gases) fails.

Teacher's Note: Dalton's law holds only for non-reacting gases.

Exam Note: Look for the reacting pair.

Set-1 Question 89. The speed possessed by most of the gaseous molecules is:
(a) most probable speed (b) average speed (c) root mean square speed (d) none of the above

Solution.

Answer: (a) most probable speed. The speed at the peak of Maxwell distribution is the most probable speed.

Teacher's Note: The peak of the distribution curve is the most probable speed.

Exam Note: Define by the maximum fraction of molecules.

Set-1 Question 90. In which of the following pairs the gaseous species diffuse through a porous plug along with the same rate of diffusion? (EAMCET 1990)
(a) NO, CO (b) NO, CO2 (c) NH3, PH3 (d) NO, C2H6

Solution.

Answer: (d) NO, C2H6. NO (30) and C2H6 (30) have equal molar masses.

Teacher's Note: Equal rate of diffusion requires equal molar mass.

Exam Note: Compare molar masses.

Set-1 Question 91. Which of the following statements is correct?
(a) 3PV = mnc2 is the expression for real gases (b) At normal temperature and pressure most gases behave nearly as ideal gases (c) The molecules of real gases have both volume and mutual attraction (d) Pressure depends on number of molecules and volume

Solution.

Answer: (c) The molecules of real gases have both volume and mutual attraction. Real gases show finite molecular volume and mutual attraction, causing deviation from ideality.

Teacher's Note: Real gas deviation arises from finite size and attraction.

Exam Note: Mention both factors.

Set-1 Question 92. For one gram molecule of an ideal gas:
(a) PV/T = 3/2 cal (b) PV/T = 2 cal (c) PV/T = 8.31 cal (d) PV/T = 0.0821 cal

Solution.

Answer: (b) PV/T = 2 cal. For one mole PV/T = R ≈ 2 cal K−1.

Teacher's Note: PV/T = R for one mole; R ≈ 1.987 cal.

Exam Note: R in cal is about 2.

Set-1 Question 93. When helium is allowed to expand into vacuum, heating effect is observed. This is due to the fact that:
(a) helium is an inert gas (b) helium is a noble gas (c) helium is an ideal gas (d) the inversion temperature of helium is very low

Solution.

Answer: (d) the inversion temperature of helium is very low. Helium's inversion temperature is very low, so at room temperature it is above Ti and warms on expansion.

Teacher's Note: Above the inversion temperature a gas heats on Joule–Thomson expansion.

Exam Note: Quote low inversion temperature of He.

Set-1 Question 94. At STP, the order of mean square velocity of molecules of H2, N2, O2 and HBr is: (CBSE 1991)
(a) H2 > N2 > O2 > HBr (b) HBr > O2 > N2 > H2 (c) HBr > H2 > O2 > N2 (d) N2 > O2 > H2 > HBr

Solution.

Answer: (a) H2 > N2 > O2 > HBr. At the same T, mean square speed ∝ 1/M: H2 (2) > N2 (28) > O2 (32) > HBr (81).

Teacher's Note: At equal T, lighter molecules move faster.

Exam Note: Order by increasing molar mass.

Set-1 Question 95. At constant temperature in a given mass of an ideal gas: (CBSE 1991)
(a) the ratio of pressure and volume always remains constant (b) volume always remains constant (c) pressure always remains constant (d) the product of pressure and volume always remains constant

Solution.

Answer: (d) the product of pressure and volume always remains constant. Boyle's law: PV = constant at fixed T and mass.

Teacher's Note: Boyle's law gives constant PV.

Exam Note: State the law.

Set-1 Question 96. The non-compressible volume of a gas is ... times the actual volume of gas molecules.
(a) 2 (b) 4 (c) 3 (d) 2.5

Solution.

Answer: (b) 4. The van der Waals constant b = 4 × (actual volume of NA molecules).

Teacher's Note: b is four times the actual molecular volume per mole.

Exam Note: Quote b = 4Vm.

Set-1 Question 97. One mole of an ideal monoatomic gas is mixed with 1 mole of an ideal diatomic gas. The molar specific heat of the mixture at constant volume is:
(a) 3 cal (b) 4 cal (c) 5 cal (d) 8 cal

Solution.

Answer: (b) 4 cal. Cv = (3R/2 + 5R/2)/2 = 2R ≈ 4 cal.

Teacher's Note: Average the molar Cv values: (3/2)R and (5/2)R.

Exam Note: Use R ≈ 2 cal.

Set-1 Question 98. In an experiment during the analysis of a carbon compound, 145 mL of H2 was collected at 760 mm Hg pressure and 27°C. The mass of H2 is nearly:
(a) 10 mg (b) 6 g (c) 12 mg (d) 12 g

Solution.

Answer: (c) 12 mg. Hint: PV = (w/M)RT: 1 × 0.145 = (w/2) × 0.0821 × 300, giving w = 0.0118 g ≈ 12 mg.

Teacher's Note: Use PV = (w/M)RT with V in litres and M = 2.

Exam Note: Convert 0.145 L and report in mg.

Set-1 Question 99. The kinetic energy of N molecules of O2 is x joule at −123°C. Another sample of O2 at 27°C has a kinetic energy of 2x joule. The latter sample contains:
(a) N molecules of O2 (b) 2N molecules of O2 (c) N/2 molecules of O2 (d) N/4 molecules of O2

Solution.

Answer: (a) N molecules of O2. KE ∝ (number of molecules) × T: N × 150 = x and N' × 300 = 2x, so N' = N.

Teacher's Note: Total KE is proportional to N × T.

Exam Note: Temperatures are 150 K and 300 K.

Set-1 Question 100. A balloon filled with N2O is pricked with a sharper point and plunged into a tank of CO2 under the same pressure and temperature. The balloon will:
(a) be enlarged (b) shrink (c) collapse completely (d) remain unchanged in size

Solution.

Answer: (d) remain unchanged in size. N2O and CO2 both have M = 44, so they effuse at equal rates and the size is unchanged.

Teacher's Note: Equal molar masses give equal diffusion rates.

Exam Note: Both gases have M = 44.

Set-1 Question 101. The three states of matter are solid, liquid and gas. Which of the following statements is true about them?
(a) Gases and liquids have viscosity as a common property (b) The molecules in all the three states possess random translational motion (c) Gases cannot be converted into solids without passing through the liquid phase (d) Solids and liquids have pressure as a common property

Solution.

Answer: (a) Gases and liquids have viscosity as a common property. Both gases and liquids flow, so both show viscosity.

Teacher's Note: Fluids (gases and liquids) have viscosity.

Exam Note: Identify the property common to both.

Set-1 Question 102. Strong intermolecular forces exist in:
(a) gases (b) liquids (c) amorphous solids (d) crystalline solids

Solution.

Answer: (d) crystalline solids. Crystalline solids have the strongest ordered intermolecular forces.

Teacher's Note: Order of forces: solids > liquids > gases.

Exam Note: Name crystalline solids.

Set-1 Question 103. Association of molecules in water is due to:
(a) covalent bonding (b) hydrogen bonding (c) ionic bonding (d) van der Waals' forces

Solution.

Answer: (b) hydrogen bonding. Hydrogen bonding links water molecules.

Teacher's Note: Water molecules are associated through hydrogen bonds.

Exam Note: Mention O–H···O bonds.

Set-1 Question 104. Which of the following statements is wrong?
(a) Evaporation is a spontaneous process (b) Evaporation is a surface phenomenon (c) Vapour pressure decreases with increase of temperature (d) The vapour pressure of a solution is always less than the vapour pressure of a pure solvent

Solution.

Answer: (c) Vapour pressure decreases with increase of temperature. Vapour pressure increases with temperature, so statement (c) is wrong.

Teacher's Note: Vapour pressure rises with temperature.

Exam Note: Spot the statement with reversed trend.

Set-1 Question 105. Normal boiling point of a liquid is that temperature at which vapour pressure of the liquid is equal to:
(a) zero (b) 380 mm of Hg (c) 760 mm of Hg (d) 100 mm of Hg

Solution.

Answer: (c) 760 mm of Hg. Normal boiling point is where vapour pressure equals 760 mm Hg (1 atm).

Teacher's Note: Boiling occurs when vapour pressure equals external pressure.

Exam Note: Normal means 1 atm.

Set-1 Question 106. Water boils at lower temperature on high altitudes because:
(a) atmospheric pressure is low there (b) atmospheric pressure is high there (c) water is weakly hydrogen bonded there (d) water in pure form is found there

Solution.

Answer: (a) atmospheric pressure is low there. Lower atmospheric pressure means vapour pressure equals it at a lower temperature.

Teacher's Note: Boiling needs vapour pressure equal to external pressure.

Exam Note: Lower external pressure lowers boiling point.

Set-1 Question 107. When a student was given a viscometer, the liquid was sucked with difficulty; the liquid may be:
(a) benzene (b) toluene (c) water (d) glycerine

Solution.

Answer: (d) glycerine. Glycerine has very high viscosity from extensive hydrogen bonding.

Teacher's Note: High viscosity means hard to suck through a capillary.

Exam Note: Glycerine has three −OH groups.

Set-1 Question 108. Mark the statement which is correct:
(a) surface tension of a liquid increases with temperature (b) addition of chemicals reduces the surface tension of a liquid (c) stalagmometer is used for measuring viscosity of the liquid (d) viscosity of the liquid does not depend on intermolecular forces

Solution.

Answer: (b) addition of chemicals reduces the surface tension of a liquid. Surfactants (soap, detergent) added to a liquid lower its surface tension.

Teacher's Note: Surface tension falls with temperature; surfactants lower it.

Exam Note: Stalagmometer measures surface tension.

Set-1 Question 109. With the increasing molecular mass of a liquid, the viscosity: (Jiwaji 1990)
(a) decreases (b) increases (c) no effect (d) all are wrong

Solution.

Answer: (b) increases. Greater molecular mass strengthens intermolecular forces, so viscosity increases.

Teacher's Note: Larger molecules have stronger intermolecular forces.

Exam Note: State the trend.

Set-1 Question 110. The viscosity of which liquid is the maximum?
(a) water (b) glycol (c) acetone (d) ethanol

Solution.

Answer: (b) glycol. Glycol has two −OH groups and extensive hydrogen bonding, so it is the most viscous.

Teacher's Note: More hydrogen bonding gives higher viscosity.

Exam Note: Count −OH groups.

Set-1 Question 111. The rise of a liquid in a capillary tube is due to:
(a) viscosity (b) osmosis (c) diffusion (d) surface tension

Solution.

Answer: (d) surface tension. Capillary rise results from surface tension.

Teacher's Note: Capillary action arises from surface tension and adhesion.

Exam Note: Name surface tension.

Set-1 Question 112. With increase in temperature, the fluidity of liquids:
(a) increases (b) decreases (c) remains constant (d) may increase or decrease

Solution.

Answer: (a) increases. Viscosity falls with temperature, so fluidity rises.

Teacher's Note: Fluidity is the inverse of viscosity.

Exam Note: Viscosity of liquids falls with T.

Set-1 Question 113. If η1 and η2 are the coefficients of viscosity of two liquids, d1 and d2 their densities and t1 and t2 the flow times in Ostwald viscometer, then:
(a) η1/η2 = d1t2/(d2t1) (b) η1/η2 = d2t2/(d1t1) (c) η1/η2 = d1t1/(d2t2) (d) η1/η2 = d2t1/(d1t2)

Solution.

Answer: (c) η1/η2 = d1t1/(d2t2). In an Ostwald viscometer η ∝ dt, so η1/η2 = d1t1/(d2t2).

Teacher's Note: Viscosity is proportional to density times flow time.

Exam Note: Write η1/η2 = d1t1/d2t2.

Set-1 Question 114. Which of the following regarding the unit of coefficient of viscosity is not true?
(a) dyne cm−2 sec (b) dyne cm2 sec−1 (c) Nm−2 sec (d) 1 poise = 10−1 Nm−2 sec

Solution.

Answer: (b) dyne cm2 sec−1. Viscosity has units dyne cm−2 s (poise); dyne cm2 s−1 is wrong.

Teacher's Note: η = force per area per velocity gradient, unit dyne s cm−2.

Exam Note: Check the powers of cm and s.

Set-1 Question 115. The boiling points of water, ethyl alcohol and diethyl ether are 100°C, 78.5°C and 34.6°C respectively. The intermolecular forces will be in the order of:
(a) water > ethyl alcohol > diethyl ether (b) ethyl alcohol > water > diethyl ether (c) diethyl ether > ethyl alcohol > water (d) diethyl ether > water > ethyl alcohol

Solution.

Answer: (a) water > ethyl alcohol > diethyl ether. Higher boiling point means stronger intermolecular forces: water > ethyl alcohol > diethyl ether.

Teacher's Note: Boiling point order mirrors strength of intermolecular forces.

Exam Note: Rank by boiling point.

Set-1 Question 116. The unit cell in a body centered cubic lattice is given in the figure. Each sphere has a radius, r and the cube has a side, a. What fraction of the total cube volume is empty? (TIFR 2010)
(a) 1 − (8/3)πr3/a3 (b) (4/3)πr3/a3 (c) r/a (d) 2 − (4/3)πr3/a3

Solution.

Answer: (a) 1 − (8/3)πr3/a3. Corrected: the printed key gives (d), but (d) 2 − (4/3)πr3/a3 exceeds 1 for any r and cannot be a fraction; the correct empty fraction is option (a). A bcc cell holds 2 atoms, so occupied fraction = 2 × (4/3)πr3/a3 and empty fraction = 1 − (8/3)πr3/a3.

Teacher's Note: Count 2 atoms per bcc cell; empty = 1 − occupied.

Exam Note: Two atoms, not one.

Set-1 Question 117. Which one is not the property of crystalline solid?
(a) Isotropic (b) Sharp melting point (c) A definite and regular geometry (d) High intermolecular forces

Solution.

Answer: (a) Isotropic. Crystalline solids are anisotropic, not isotropic.

Teacher's Note: Crystalline solids show anisotropy; amorphous solids are isotropic.

Exam Note: State anisotropic for crystals.

Set-1 Question 118. The number of crystal systems known is:
(a) 7 (b) 8 (c) 6 (d) 4

Solution.

Answer: (a) 7. Seven crystal systems are known.

Teacher's Note: Cubic, tetragonal, orthorhombic, monoclinic, triclinic, hexagonal, rhombohedral.

Exam Note: List the seven systems.

Set-1 Question 119. Tetragonal crystal system has the following unit cell dimensions: [PMT (MP) 1993]
(a) a = b = c and α = β = γ = 90° (b) a = b ≠ c and α = β = γ = 90° (c) a ≠ b ≠ c and α = β = γ = 90° (d) a = b ≠ c and α = β = 90°, γ = 120°

Solution.

Answer: (b) a = b ≠ c and α = β = γ = 90°. Tetragonal: a = b ≠ c with all angles 90°.

Teacher's Note: Option (a) is cubic, (c) orthorhombic, (d) hexagonal.

Exam Note: Match each option to a crystal system.

Set-1 Question 120. A match box exhibits: [PET (MP) 1993]
(a) cubic geometry (b) monoclinic geometry (c) orthorhombic geometry (d) tetragonal geometry

Solution.

Answer: (c) orthorhombic geometry. A matchbox has three unequal edges at right angles: orthorhombic.

Teacher's Note: Three unequal edges and 90° angles mean orthorhombic.

Exam Note: Compare edges a, b, c.

Set-1 Question 121. In the crystal of CsCl, the nearest neighbours of each Cs ion are: [PET (MP) 1993]
(a) six chloride ions (b) eight Cs ions (c) six Cs ions (d) eight chloride ions

Solution.

Answer: (d) eight chloride ions. CsCl has 8:8 coordination, so each Cs+ has eight Cl− neighbours.

Teacher's Note: CsCl structure has coordination number 8.

Exam Note: Specify the type of neighbour.

Set-1 Question 122. How many chloride ions are there around sodium ion in sodium chloride crystal?
(a) 3 (b) 8 (c) 4 (d) 6

Solution.

Answer: (d) 6. NaCl has 6:6 coordination.

Teacher's Note: NaCl is octahedral with coordination number 6.

Exam Note: Quote 6:6.

Set-1 Question 123. The number of atoms contained in one face-centred cubic unit cell of monoatomic substance is: [PMT (Vellore) 2006; PET (MP) 2007]
(a) 1 (b) 2 (c) 4 (d) 3

Solution.

Answer: (c) 4. 8 × 1/8 + 6 × 1/2 = 4 atoms.

Teacher's Note: Corners give 1 and faces give 3.

Exam Note: Count corners and face centres.

Set-1 Question 124. The number of close neighbours in a body-centred cubic lattice of identical spheres is:
(a) 4 (b) 12 (c) 6 (d) 8

Solution.

Answer: (d) 8. In bcc the coordination number is 8.

Teacher's Note: Body-centre atom touches 8 corner atoms.

Exam Note: bcc CN = 8, fcc CN = 12.

Set-1 Question 125. The coordination number of each sphere in (hcc) arrangement is:
(a) 8 (b) 12 (c) 6 (d) 4

Solution.

Answer: (b) 12. Close-packed arrangements (ccp/hcp) have coordination number 12.

Teacher's Note: Both ccp and hcp have CN 12.

Exam Note: Quote 12 for close packing.

Set-1 Question 126. Bragg's law is given by the equation: (BHU 1990)
(a) nλ = 2θ sin θ (b) nλ = 2d sin θ (c) 2nλ = d sin θ (d) nθ/2 = (d/2) sin θ

Solution.

Answer: (b) nλ = 2d sin θ. Bragg's law: nλ = 2d sin θ.

Teacher's Note: Bragg's law links wavelength, plane spacing and angle.

Exam Note: Write nλ = 2d sinθ.

Set-1 Question 127. In Bragg's equation for diffraction of X-rays, 'n' represents:
(a) quantum number (b) number of mole (c) the order of reflection (d) Avogadro's number

Solution.

Answer: (c) the order of reflection. In nλ = 2d sin θ, n is the order of reflection.

Teacher's Note: n is an integer 1, 2, 3, ... the order of reflection.

Exam Note: Define n as order.

Set-1 Question 128. The coordination number for an atom in a primitive cubic unit cell is:
(a) 6 (b) 8 (c) 10 (d) 12

Solution.

Answer: (a) 6. Simple cubic: each atom touches 6 neighbours.

Teacher's Note: Simple cubic has CN 6.

Exam Note: Six neighbours along ±x, ±y, ±z.

Set-1 Question 129. The number of atoms per unit cell in a simple cubic, face-centred cubic and body-centred cubic are ......, respectively:
(a) 1, 4, 2 (b) 4, 1, 2 (c) 2, 4, 1 (d) 4, 8, 2

Solution.

Answer: (a) 1, 4, 2. Simple cubic 1, fcc 4, bcc 2.

Teacher's Note: Count atoms per cell: 1, 4, 2.

Exam Note: Order is sc, fcc, bcc.

Set-1 Question 130. In a solid lattice, the cation has left a lattice site and is located at interstitial position, the lattice defect is: (VITEEE 2007)
(a) interstitial defect (b) vacancy defect (c) Frenkel defect (d) Schottky defect

Solution.

Answer: (c) Frenkel defect. A cation moving from its lattice site to an interstitial site is a Frenkel defect.

Teacher's Note: Frenkel defect is vacancy plus interstitial of the cation.

Exam Note: Describe both parts.

Set-1 Question 131. Schottky defects occur mainly in ionic compounds where: (VITEEE 2008)
(a) positive and negative ions are of different size (b) positive and negative ions are of same size (c) positive ions are small and negative ions are big (d) positive ions are big and negative ions are small

Solution.

Answer: (b) positive and negative ions are of same size. Schottky defect needs cations and anions of similar size (e.g. NaCl, KCl).

Teacher's Note: High coordination and similar ion sizes favour Schottky defects.

Exam Note: Contrast with Frenkel (small cation).

Set-1 Question 132. What type of crystal defect is indicated in the diagram below? (AIEEE 2004) (a lattice of alternating Na+ and Cl− ions in four rows in which some Na+ and Cl− sites are empty and no ion sits in an interstitial position)
(a) Frenkel defect (b) Schottky defect (c) Interstitial defect (d) Frenkel and Schottky defects

Solution.

Answer: (b) Schottky defect. Corrected: the printed key gives (a) Frenkel defect, but the diagram shows only vacancies of both ions with no interstitial ion, so the correct answer is (b) Schottky defect. Equal numbers of Na+ and Cl− ions are missing from the lattice and none is displaced to an interstitial site, so it is a Schottky defect.

Teacher's Note: Paired vacancies of both ions without interstitials is Schottky.

Exam Note: Check for displaced ions in the diagram.

Set-1 Question 133. In a closed packed array of N spheres, the number of tetrahedral holes is:
(a) N/2 (b) N (c) 4N (d) 2N

Solution.

Answer: (d) 2N. Close packing has N octahedral and 2N tetrahedral holes.

Teacher's Note: Voids: octahedral N, tetrahedral 2N.

Exam Note: Quote both numbers.

Set-1 Question 134. In a closed packed array of N spheres, the octahedral holes are:
(a) N/2 (b) 2N (c) 4N (d) N

Solution.

Answer: (d) N. Close packing has N octahedral holes.

Teacher's Note: N spheres give N octahedral and 2N tetrahedral holes.

Exam Note: Quote both counts.

Set-1 Question 135. AB crystallizes in a body centred cubic lattice with edge length 'a' equal to 387 pm. The distance between two oppositely charged ions in the lattice is: [CBSE (PMT) 2010]
(a) 335 pm (b) 250 pm (c) 200 pm (d) 300 pm

Solution.

Answer: (a) 335 pm. Hint: r+ + r− = a√3/2 = 387 × √3/2 = 335.14 pm.

Teacher's Note: In CsCl-type lattice the ions touch along the body diagonal: √3a/2.

Exam Note: Use half the body diagonal.

Set-1 Question 136. Germanium or silicon becomes semiconductor due to:
(a) Schottky defect (b) chemical impurity (c) Frenkel defect (d) none of these

Solution.

Answer: (b) chemical impurity. Doping with chemical impurity makes them extrinsic semiconductors (the book key gives this answer).

Teacher's Note: Semiconductivity of Si and Ge is raised by adding impurities.

Exam Note: Name doping as impurity defect.

Set-1 Question 137. A particular solid is very hard and has a high melting point. In solid state it is a non conductor and its melt is a conductor of electricity. Classify the solid: [CMC Vellore (Med.) 2008]
(a) metallic (b) molecular (c) network (d) ionic (e) amorphous

Solution.

Answer: (d) ionic. Hard, high-melting, insulating solid whose melt conducts is ionic.

Teacher's Note: Ionic solids conduct only when molten or dissolved.

Exam Note: Mention the melt conducts.

Set-1 Question 138. Which one has the highest melting point?
(a) Ionic crystal (b) Molecular crystal (c) Covalent crystal (d) Metallic crystal

Solution.

Answer: (c) Covalent crystal. Covalent (network) crystals such as diamond have very high melting points.

Teacher's Note: Network covalent solids need many strong bonds broken.

Exam Note: Name diamond as the example.

Set-1 Question 139. For an ionic crystal of general formula AX and coordination number 6, the value of radius ratio will be: [PMT (MP) 1993]
(a) greater than 0.73 (b) in between 0.73 and 0.41 (c) in between 0.41 and 0.22 (d) less than 0.22

Solution.

Answer: (b) in between 0.73 and 0.41. CN 6 (octahedral) needs radius ratio 0.414–0.732.

Teacher's Note: Radius ratio ranges: 0.155–0.225 (3), 0.225–0.414 (4), 0.414–0.732 (6).

Exam Note: Memorise the ranges.

Set-1 Question 140. The Ca2+ and F− are located in CaF2 crystal respectively at face-centred cubic lattice points and in: (AIIMS 2006)
(a) tetrahedral voids (b) half of tetrahedral voids (c) octahedral voids (d) half of octahedral voids

Solution.

Answer: (a) tetrahedral voids. Ca2+ forms fcc and F− fill all (8) tetrahedral voids.

Teacher's Note: Fluorite: cations fcc, anions occupy all tetrahedral voids.

Exam Note: 2 F− per Ca2+ need all 8 voids.

Set-1 Question 141. In calcium fluoride structure, the coordination numbers of calcium and fluoride ions are:
(a) 8 and 4 (b) 6 and 8 (c) 4 and 4 (d) 4 and 8

Solution.

Answer: (a) 8 and 4. Fluorite structure has 8:4 coordination.

Teacher's Note: Ca2+ has 8 F− neighbours; F− has 4 Ca2+.

Exam Note: Give cation first.

Set-1 Question 142. The unit cell of a binary compound of A and B metals has a ccp structure with A atoms occupying the corners and B atoms occupying the centres of each faces of the cubic unit cell. If during the crystallisation of this alloy, in the unit cell two A atoms are missed, the overall composition per unit cell is: [CET (J&K) 2009]
(a) AB6 (b) AB4 (c) AB8 (d) A6B24

Solution.

Answer: (b) AB4. Hint: A = 6 × 1/8 = 3/4; B = 6 × 1/2 = 3; A : B = 3/4 : 3 = 1 : 4, so AB4.

Teacher's Note: Two missing corners leave 6 corners at 1/8 each.

Exam Note: Count atoms before simplifying.

Set-1 Question 143. In a solid lattice, the cation has left a lattice site and is located at an interstitial position. The lattice defect is: [BHU (screening) 2008]
(a) interstitial defect (b) vacancy defect (c) Frenkel defect (d) Schottky defect

Solution.

Answer: (c) Frenkel defect. A cation displaced to an interstitial site is a Frenkel defect.

Teacher's Note: Frenkel = vacancy plus interstitial of the same ion.

Exam Note: Describe both parts.

Set-1 Question 144. Which of the following statements is incorrect about amorphous solids? (KCET 2004)
(a) They are anisotropic (b) They are rigid and incompressible (c) They melt over a wide range of temperature (d) There is no orderly arrangement of particles

Solution.

Answer: (a) They are anisotropic. Amorphous solids are isotropic, not anisotropic.

Teacher's Note: Amorphous solids lack long-range order and are isotropic.

Exam Note: Crystalline solids are the anisotropic ones.

Set-1 Question 145. Which defect causes decrease in the density of a crystal?
(a) Frenkel (b) Schottky (c) Interstitial (d) F-centre

Solution.

Answer: (b) Schottky. Schottky defect removes ions from the crystal, lowering density.

Teacher's Note: Frenkel leaves density unchanged; Schottky lowers it.

Exam Note: Contrast the two.

Set-1 Question 146. For tetrahedral coordination number, the radius ratio rc+/ra− is: (KCET 2008)
(a) 0.732 − 1.0 (b) 0.225 − 0.414 (c) 0.414 − 0.732 (d) 0.155 − 0.225

Solution.

Answer: (b) 0.225 − 0.414. Corrected: the printed key gives (c) 0.414–0.732, but that range is octahedral (CN 6); tetrahedral coordination corresponds to (b) 0.225–0.414, as the book's own theory (p. 281) states. Tetrahedral (CN 4) corresponds to radius ratio 0.225–0.414.

Teacher's Note: CN 4 is 0.225–0.414; octahedral is 0.414–0.732.

Exam Note: Learn the radius-ratio table.

Set-1 Question 147. What is the total number of ions present in one unit cell of sodium chloride lattice? (EAMCET 2006)
(a) 2 (b) 6 (c) 12 (d) 8

Solution.

Answer: (d) 8. Corrected: the printed key gives (c) 12, but a NaCl unit cell holds 4 Na+ and 4 Cl− ions, so the correct answer is (d) 8. NaCl unit cell has 4 Na+ and 4 Cl−, total 8 ions.

Teacher's Note: Count Na+ (12 edges × 1/4 + 1) and Cl− (8 × 1/8 + 6 × 1/2).

Exam Note: Total is 4 + 4 = 8.

Set-1 Question 148. The formula for determination of density of cubic unit cell is:
(a) a3N0/(Z × M) g cm−3 (b) Z × N0/(M × a3) g cm−3 (c) a3 × M/(Z × N0) g cm−3 (d) Z × M/(N0 × a3) g cm−3

Solution.

Answer: (d) Z × M/(N0 × a3) g cm−3. ρ = ZM/(N0a3).

Teacher's Note: Density = mass of Z formula units divided by cell volume.

Exam Note: Write ρ = ZM/(NAa3).

Set-1 Question 149. The closest-packing sequence ABAB..... represents:
(a) primitive cubic packing (b) body-centred cubic packing (c) face-centred cubic packing (d) hexagonal packing

Solution.

Answer: (d) hexagonal packing. ABAB... is hexagonal close packing.

Teacher's Note: ABAB is hcp; ABCABC is ccp (fcc).

Exam Note: Repeat of two layers means hcp.

Set-1 Question 150. The closest-packing sequence ABC ABC..... represents:
(a) primitive cubic packing (b) body-centred cubic packing (c) face-centred cubic packing (d) hexagonal packing

Solution.

Answer: (c) face-centred cubic packing. ABCABC... is cubic close packing (fcc).

Teacher's Note: Three-layer repeat means ccp.

Exam Note: ABCABC is fcc.

Set-1 Question 151. The edge length of face centred cubic cell of an ionic substance is 508 pm. If the radius of cation is 110 pm, the radius of anion is: (AIEEE 2010)
(a) 618 pm (b) 144 pm (c) 288 pm (d) 398 pm

Solution.

Answer: (b) 144 pm. Hint: edge length = 2(r+ + r−): 508 = 2(110 + r−), so r− = 144 pm.

Teacher's Note: Along the cell edge of NaCl-type lattice cation and anion touch: a = 2(r+ + r−).

Exam Note: Use a = 2(r+ + r−).

Set-1 Question 152. Close packing is maximum in the crystal lattice of:
(a) face-centred cubic (b) body-centred cubic (c) simple-centred cubic (d) none of these

Solution.

Answer: (a) face-centred cubic. fcc is close-packed with 74% packing efficiency.

Teacher's Note: fcc and hcp have the highest packing, 74%.

Exam Note: Quote 74%.

Set-1 Question 153. The ratio between the root mean square speed of H2 at 50 K and that of O2 at 800 K is: (IIT 1996)
(a) 4 (b) 2 (c) 1 (d) 1/4

Solution.

Answer: (c) 1. u ∝ √(T/M): √(50/2) = 5 and √(800/32) = 5, so the ratio is 1.

Teacher's Note: Compare √(T/M) for each gas.

Exam Note: T/M = 25 for both.

Set-1 Question 154. X mL of H2 gas effused through a hole in a container in 5 second. The time taken for the effusion of the same volume of the gas specified below under identical conditions is: (IIT 1996)
(a) 10 second : He (b) 20 second : O2 (c) 25 second : CO (d) 55 second : CO2

Solution.

Answer: (b) 20 second : O2. t ∝ √M: for O2, t = 5 × √(32/2) = 20 s.

Teacher's Note: Check each option with t = 5√(M/2).

Exam Note: He gives 7 s, CO 19 s, CO2 23 s.

Set-1 Question 155. The energy of a gas per litre is 300 joule. Its pressure will be:
(a) 3 × 105 N/m2 (b) 6 × 105 N/m2 (c) 105 N/m2 (d) 2 × 105 N/m2

Solution.

Answer: (d) 2 × 105 N/m2. P = (2/3)(E/V) = (2/3)(300 J/10−3 m3) = 2 × 105 N/m2.

Teacher's Note: Kinetic theory: PV = (2/3)E.

Exam Note: Convert 1 litre to 10−3 m3.

Set-1 Question 156. If the universal gas constant is 8.3 joule mol−1 K−1 and the Avogadro's number is 6 × 1023. The mean kinetic energy of oxygen molecules at 327°C will be:
(a) 415 × 10−23 joule (b) 2490 × 10−22 joule (c) 1245 × 10−23 joule (d) 830 × 10−22 joule

Solution.

Answer: (c) 1245 × 10−23 joule. KE = (3/2)(R/NA)T = 1.5 × (8.3/6 × 1023) × 600 = 1.245 × 10−20 J = 1245 × 10−23 J.

Teacher's Note: Mean KE per molecule is (3/2)kT with k = R/NA.

Exam Note: T = 327 + 273 = 600 K.

Set-1 Question 157. If increase in temperature and volume of an ideal gas is two times, then initial pressure of P changes to: [JEE (Orissa) 2006]
(a) 4P (b) 2P (c) P (d) 3P

Solution.

Answer: (c) P. P2 = P × (V1/V2)(T2/T1) = P × (1/2)(2) = P.

Teacher's Note: Doubling both T and V leaves pressure unchanged since P ∝ T/V.

Exam Note: Use the combined gas law.

Set-1 Question 158. The average kinetic energy of one molecule of an ideal gas at 27°C and 1 atm pressure is: (EAMCET 2009)
(a) 900 cal K−1 mol−1 (b) 6.21 × 10−21 J K−1 molecule−1 (c) 336.7 J K−1 molecule−1 (d) 3741.3 J K−1 mol−1

Solution.

Answer: (b) 6.21 × 10−21 J K−1 molecule−1. Hint: KE = (3R/2N)T = (3/2)(8.314/6.023 × 1023)(300) = 6.21 × 10−21 J per molecule.

Teacher's Note: Per-molecule KE = (3/2)kT; the unit is joule per molecule.

Exam Note: k = 1.38 × 10−23 J/K.

Set-1 Question 159. The respective speeds of five molecules are 2, 1.5, 1.6, 1.6 and 1.2 km/sec. The most probable speed in km/sec will be:
(a) 2 (b) 1.58 (c) 1.6 (d) 1.31

Solution.

Answer: (c) 1.6. Corrected: the printed key gives (d) 1.31, which matches no standard measure; the speeds 2, 1.5, 1.6, 1.6, 1.2 give mean 1.58, rms 1.60 and mode 1.6, so the most probable speed is (c) 1.6 km/s. The most probable speed is the speed possessed by the largest number of molecules: 1.6 km/s occurs twice.

Teacher's Note: Most probable speed is the mode of the speed list.

Exam Note: 1.58 is the mean, not the mode.

Set-1 Question 160. If one mole of a monoatomic gas (γ = 5/3) is mixed with one mole of diatomic gas (γ = 7/5), the value of γ for the mixture is:
(a) 1.40 (b) 1.50 (c) 1.53 (d) 3.07

Solution.

Answer: (b) 1.50. Cv = (3R/2 + 5R/2)/2 = 2R, Cp = 3R, so γ = 3/2 = 1.50.

Teacher's Note: Average Cv and Cp of the two gases, then divide.

Exam Note: Do not average γ directly.

Set-1 Question 161. The root mean square speed of hydrogen molecule of an ideal hydrogen gas kept in a gas chamber at 0°C is 3180 metre/second. The pressure on the hydrogen gas is: (density of hydrogen gas is 8.99 × 10−2 kg/m3, 1 atmosphere = 1.01 × 105 N/m2)
(a) 1.0 atmosphere (b) 1.5 atmosphere (c) 2.0 atmosphere (d) 3.0 atmosphere

Solution.

Answer: (d) 3.0 atmosphere. P = (1/3)du2 = (1/3)(0.0899)(3180)2 = 3.03 × 105 N/m2 = 3.0 atm.

Teacher's Note: Use P = (1/3)ρurms2 in SI units.

Exam Note: Divide by 1.01 × 105 to get atm.

Set-1 Question 162. CH4 diffuses two times faster than a gas X. The number of molecules present in 32 g of gas X is: (N is Avogadro number) [EAMCET (Engg.) 2010]
(a) N (b) N/2 (c) N/4 (d) N/16

Solution.

Answer: (b) N/2. Hint: rCH4/rgas = √(mgas/mCH4), 2 = √(m/16), mgas = 64. Number of molecules = (32/64) × N = N/2.

Teacher's Note: Graham's law gives MX = 64; then 32 g is half a mole.

Exam Note: Square the rate ratio first.

Set-1 Question 163. At what temperature would the rms speed of a gas molecule have twice its value at 100°C?
(a) 4192 K (b) 1492 K (c) 9142 K (d) 2491 K

Solution.

Answer: (b) 1492 K. u ∝ √T, so T = 4 × 373 = 1492 K.

Teacher's Note: Doubling rms speed needs four times the absolute temperature.

Exam Note: Start from 373 K.

Set-1 Question 164. Find the rms speed of an argon molecule at 27°C (Molecular weight of argon = 40 gm/mol):
(a) 234.2 m/s (b) 342.2 m/s (c) 432.2 m/s (d) 243.2 m/s

Solution.

Answer: (c) 432.2 m/s. u = √(3RT/M) = √(3 × 8.314 × 300/0.040) = 432.5 m/s.

Teacher's Note: Use M in kg/mol with R = 8.314 J.

Exam Note: M = 0.040 kg/mol.

Set-1 Question 165. At a temperature T K, the pressure of 4 g argon in a bulb is P. The bulb is put in a bath having a temperature higher by 50 K than the first one. 0.8 g of argon gas had to be removed to maintain original pressure. The temperature T is equal to: (IIT 1999)
(a) 510 K (b) 200 K (c) 100 K (d) 73 K

Solution.

Answer: (b) 200 K. At constant P and V, nT is constant: 4T = 3.2(T + 50), so T = 200 K.

Teacher's Note: Fixed P and V means mass × T stays constant.

Exam Note: 3.2 g remain after removing 0.8 g.

Set-1 Question 166. At 25°C and 730 mm pressure, 380 mL of dry oxygen was collected. If the temperature is constant, what volume will the oxygen occupy at 760 mm pressure? (CBSE 1999)
(a) 265 mL (b) 365 mL (c) 569 mL (d) 621 mL

Solution.

Answer: (b) 365 mL. V = 380 × 730/760 = 365 mL.

Teacher's Note: Boyle's law at constant T.

Exam Note: Higher pressure gives smaller volume.

Set-1 Question 167. Which of the following solids shows electrical conduction? (CBSE 1999)
(a) Graphite (b) Potassium chloride (c) Diamond (d) Sodium chloride

Solution.

Answer: (a) Graphite. Graphite has delocalised electrons and conducts electricity.

Teacher's Note: Graphite conducts along its layers; diamond, KCl and NaCl solids do not.

Exam Note: Mention delocalised electrons.

Set-1 Question 168. Schottky defect in solids is due to: [PMT (Vellore) 2006; VITEEE 2006]
(a) a pair of cation and anion vacancies (b) occupation of interstitial site by a pair of cation and anion (c) occupation of interstitial site by a cation (d) occupation of interstitial site by an anion

Solution.

Answer: (a) a pair of cation and anion vacancies. Schottky defect is a missing pair of cation and anion.

Teacher's Note: Equal numbers of cation and anion vacancies keep neutrality.

Exam Note: Contrast with Frenkel.

Set-1 Question 169. Copper crystallises in face-centred cubic lattice with a unit cell length of 361 pm. What is the radius of copper atom in pm? [CBSE (PMT) 2009; AIEEE 2009]
(a) 108 (b) 128 (c) 157 (d) 181

Solution.

Answer: (b) 128. Hint: a√2 = 4r, so r = 361 × √2/4 = 128 pm.

Teacher's Note: In fcc atoms touch along the face diagonal: 4r = a√2.

Exam Note: r = a/(2√2).

Set-1 Question 170. The second order Bragg diffraction of X-rays with λ = 1 Å from a set of parallel planes in a metal occurs at an angle of 60°. The distance between the scattering planes in the crystal is: (CBSE 1998)
(a) 0.575 Å (b) 1.00 Å (c) 2.00 Å (d) 1.15 Å

Solution.

Answer: (d) 1.15 Å. d = nλ/(2 sin θ) = 2 × 1/(2 × 0.866) = 1.155 Å.

Teacher's Note: Apply nλ = 2d sinθ with n = 2.

Exam Note: sin 60° = 0.866.

Set-1 Question 171. According to Graham's law at a given temperature the ratio of the rates of diffusion rA/rB of gases A and B is given by: (IIT 1998)
(a) (PA/PB)(MA/MB)1/2 (b) (MA/MB)(PB/PA)1/2 (c) (PA/PB)(MB/MA)1/2 (d) (MA/MB)(PA/PB)1/2

Solution.

Answer: (c) (PA/PB)(MB/MA)1/2. Rate is proportional to pressure and inversely to √M: rA/rB = (PA/PB)(MB/MA)1/2.

Teacher's Note: Rate ∝ P/√M at a given temperature.

Exam Note: Pressure term is not under the root.

Set-1 Question 172. The root mean square velocity of an ideal gas at constant pressure varies with density as: [IIT (Screening) 2000]
(a) d2 (b) d (c) √d (d) 1/√d

Solution.

Answer: (d) 1/√d. u = √(3P/d) ∝ 1/√d at constant P.

Teacher's Note: From urms = √(3P/d), speed falls as density rises.

Exam Note: Keep P constant.

Set-1 Question 173. Match the following: List-I: (A) Inversion temperature (B) Boyle's temperature (C) Critical temperature; List-II: (i) a/Rb (ii) 8a/27Rb (iii) 2a/Rb
(a) A→(i), B→(ii), C→(iii) (b) A→(iii), B→(ii), C→(i) (c) A→(iii), B→(i), C→(ii) (d) A→(i), B→(iii), C→(ii)

Solution.

Answer: (c) A→(iii), B→(i), C→(ii). Ti = 2a/Rb, TB = a/Rb, Tc = 8a/27Rb.

Teacher's Note: Remember Ti = 2TB and Tc = 8TB/27.

Exam Note: Link each temperature to its a/Rb multiple.

Set-1 Question 174. For three different gases values of van der Waals' constant 'a' and 'b' are given: X2 (a = 1.3, b = 0.090), Y2 (a = 4.1, b = 0.023), Z2 (a = 2.2, b = 0.075). What is the correct order of liquefaction of gases?
(a) X2 > Y2 > Z2 (b) Y2 > Z2 > X2 (c) Z2 > Y2 > X2 (d) X2 > Z2 > Y2

Solution.

Answer: (b) Y2 > Z2 > X2. Ease of liquefaction increases with a (attraction): Y2 (4.1) > Z2 (2.2) > X2 (1.3).

Teacher's Note: Larger a means stronger attraction and easier liquefaction.

Exam Note: Rank by a.

Set-1 Question 175. Match the following: List-I: (A) Pc (B) Vc (C) Tc; List-II: (i) 3b (ii) 8a/27bR (iii) a/27b2
(a) A→(i), B→(ii), C→(iii) (b) A→(iii), B→(ii), C→(i) (c) A→(ii), B→(iii), C→(i) (d) A→(iii), B→(i), C→(ii)

Solution.

Answer: (d) A→(iii), B→(i), C→(ii). Pc = a/27b2, Vc = 3b, Tc = 8a/27Rb.

Teacher's Note: Memorise the critical constants of van der Waals gas.

Exam Note: PcVc/RTc = 3/8.

Set-1 Question 176. By what factor does the average velocity of a gaseous molecule increase when the absolute temperature is doubled? (DUMET 2010)
(a) 1.4 (b) 2 (c) 2.8 (d) 4.0

Solution.

Answer: (a) 1.4. uav ∝ √T, so the factor is √2 = 1.4.

Teacher's Note: Average speed scales as √T.

Exam Note: Doubling T gives √2.

Set-1 Question 177. The van der Waals' constant 'a' for different gases have been given as: O2 1.36, N2 1.39, CH4 2.25, NH3 4.17 (atm L2 mol−2). The gas that can be most easily liquefied is: [JEE (Orissa) 2010]
(a) O2 (b) N2 (c) CH4 (d) NH3

Solution.

Answer: (d) NH3. NH3 has the largest a, hence strongest attraction and easiest liquefaction.

Teacher's Note: Highest a gives highest critical temperature.

Exam Note: Pick the largest a.

Set-1 Question 178. Match the following: List-I: (A) Urms/Uav (B) Uav/Ump (C) Urms/Ump; List-II: (i) 1.22 (ii) 1.13 (iii) 1.08
(a) A→(iii), B→(ii), C→(i) (b) A→(i), B→(ii), C→(iii) (c) A→(iii), B→(i), C→(ii) (d) A→(ii), B→(iii), C→(i)

Solution.

Answer: (a) A→(iii), B→(ii), C→(i). Corrected: the printed key gives (b) A→(i), B→(ii), C→(iii), but Urms/Uav is 1.08, not 1.22, so the correct match is (a). Urms/Uav = √(3π/8) = 1.08, Uav/Ump = 2/√π = 1.13, Urms/Ump = √(3/2) = 1.22.

Teacher's Note: Use ump : uav : urms = 1 : 1.128 : 1.224.

Exam Note: Divide the pairs.

Set-1 Question 179. Joule-Thomson coefficient is zero at:
(a) critical temperature (b) inversion temperature (c) absolute temperature (d) Boyle's temperature

Solution.

Answer: (b) inversion temperature. Corrected: the printed key gives (a) critical temperature, but the Joule–Thomson coefficient vanishes at the inversion temperature, so the answer is (b). By definition the Joule–Thomson coefficient is zero at the inversion temperature.

Teacher's Note: μJT changes sign at the inversion temperature.

Exam Note: Define Ti = 2a/Rb.

Set-1 Question 180. At a constant pressure, what should be the percentage increase in temperature for a 10% increase in volume?
(a) 10% (b) 11% (c) 8.9% (d) 12.5%

Solution.

Answer: (a) 10%. At constant P, V ∝ T, so a 10% rise in V needs a 10% rise in T.

Teacher's Note: Charles' law: fractional changes are equal.

Exam Note: V/T is constant.

Set-1 Question 181. 5 g of unknown gas has pressure P at a temperature T K in a vessel. On increasing the temperature by 50°C, 1 g of the gas was given out to maintain the pressure P. The original temperature was:
(a) 73 K (b) 100 K (c) 200 K (d) none of these

Solution.

Answer: (c) 200 K. Corrected: the printed key gives (b) 100 K, but 5T = 4(T + 50) gives T = 200 K (the same as problem 165), so the answer is (c). Fixed P and V means nT is constant: 5T = 4(T + 50), so T = 200 K.

Teacher's Note: Mass × T is constant when P and V are fixed.

Exam Note: 4 g remain after 1 g leaves.

Set-1 Question 182. Which of the following expressions correctly represents the relationship between the average molar kinetic energy, KE, of CO and N2 molecules at the same temperature? [CBSE (PMT) 2000]
(a) KECO = KEN2 (b) KECO > KEN2 (c) KECO < KEN2 (d) cannot be predicted unless the volumes of the gases are given

Solution.

Answer: (a) KECO = KEN2. Average KE = (3/2)RT per mole depends only on temperature.

Teacher's Note: Average molar KE is the same for all gases at one T.

Exam Note: Mass drops out of (3/2)RT.

Set-1 Question 183. Which of the following exhibits the weakest intermolecular forces? (AIIMS 2000)
(a) NH3 (b) HCl (c) He (d) H2O

Solution.

Answer: (c) He. He is a monoatomic noble gas with only very weak dispersion forces.

Teacher's Note: NH3 and H2O hydrogen-bond; HCl is polar; He is non-polar.

Exam Note: Rank by polarity and bonding.

Set-1 Question 184. The compressibility factor of a gas is less than unity at STP. Therefore: [IIT 2000; PMT (MP) 2004]
(a) Vm > 22.4 litre (b) Vm < 22.4 litre (c) Vm = 22.4 litre (d) Vm = 44.8 litre

Solution.

Answer: (b) Vm < 22.4 litre. Z = PVm/RT < 1 at STP means Vm is less than the ideal 22.4 L.

Teacher's Note: Z < 1 means attraction dominates, so the gas is more compressible.

Exam Note: At STP ideal Vm = 22.4 L.

Set-1 Question 185. The rms velocity of hydrogen is √7 times the rms velocity of nitrogen. If T is the temperature of the gas: (IIT 2000)
(a) T(H2) = T(N2) (b) T(H2) > T(N2) (c) T(H2) < T(N2) (d) T(H2) = √7 T(N2)

Solution.

Answer: (c) T(H2) < T(N2). 7 = [T(H2)/2]/[T(N2)/28], so T(H2) = T(N2)/2, which is smaller.

Teacher's Note: At equal T, H2 would be √14 times faster, so H2 is cooler.

Exam Note: Compare using u2 ∝ T/M.

Set-1 Question 186. The kinetic energy of any gas molecule at 0°C is:
(a) zero (b) 3408 J (c) 2 cal (d) 5.66 × 10−21 J

Solution.

Answer: (d) 5.66 × 10−21 J. KE = (3/2)kT = 1.5 × 1.38 × 10−23 × 273 = 5.65 × 10−21 J per molecule.

Teacher's Note: Per molecule KE is (3/2)kT, same for every gas.

Exam Note: 3408 J is per mole.

Set-1 Question 187. Densities of two gases are in the ratio 1 : 2 and their temperatures are in the ratio 2 : 1; then the ratio of their respective pressures is: (BHU 2000)
(a) 1 : 1 (b) 1 : 2 (c) 2 : 1 (d) 4 : 1

Solution.

Answer: (a) 1 : 1. P ∝ dT, so P1/P2 = (1 × 2)/(2 × 1) = 1.

Teacher's Note: From P = dRT/M, P is proportional to d × T.

Exam Note: Same M is assumed.

Set-1 Question 188. Gas equation PV = nRT is obeyed by: (BHU 2000)
(a) only isothermal process (b) only adiabatic process (c) both (a) and (b) (d) none of these

Solution.

Answer: (c) both (a) and (b). The ideal gas equation describes the state of the gas in any process, isothermal or adiabatic.

Teacher's Note: PV = nRT relates the state variables at any instant.

Exam Note: It is not restricted to one process.

Set-1 Question 189. An ideal gas will have maximum density when: (CPMT 2000)
(a) P = 0.5 atm, T = 600 K (b) P = 2 atm, T = 150 K (c) P = 1 atm, T = 300 K (d) P = 1.0 atm, T = 500 K

Solution.

Answer: (b) P = 2 atm, T = 150 K. d ∝ P/T: the values are 0.00083, 0.0133, 0.0033 and 0.002; the maximum is 2 atm at 150 K.

Teacher's Note: Compare P/T for each option.

Exam Note: Density rises with P and falls with T.

Set-1 Question 190. The following graph illustrates: (JIPMER 2000) (a straight line of V against temperature in °C, rising and cutting the temperature axis at a negative value)
(a) Dalton's law (b) Charles' law (c) Boyle's law (d) Gay-Lussac's law

Solution.

Answer: (b) Charles' law. A V–t (°C) straight line that meets the axis at −273°C is Charles' law.

Teacher's Note: Volume varies linearly with temperature at constant P.

Exam Note: Extrapolates to −273°C.

Set-1 Question 191. 4.4 g of a gas at STP occupies a volume of 2.24 L. The gas can be: [CET (Haryana) 2000]
(a) O2 (b) CO (c) NO2 (d) CO2

Solution.

Answer: (d) CO2. M = 4.4/0.1 = 44, so the gas is CO2 (or N2O).

Teacher's Note: 2.24 L is 0.1 mol, so M = 44.

Exam Note: Only CO2 among the options has M = 44.

Set-1 Question 192. At 0°C and one atm pressure a gas occupies 100 cc. If the pressure is increased to one and a half time and temperature is increased by one-third of absolute temperature, then final volume of the gas will be: (DCE 2000)
(a) 80 cc (b) 88.9 cc (c) 66.7 cc (d) 100 cc

Solution.

Answer: (b) 88.9 cc. V = 100 × (1/1.5) × (4/3) = 88.9 cc.

Teacher's Note: Combined gas law: V2 = V1(P1/P2)(T2/T1).

Exam Note: T rises by 1/3, so factor 4/3.

Set-1 Question 193. Pressure of a mixture of 4 g of O2 and 2 g of H2 confined in a bulb of 1 litre at 0°C is: (AIIMS 2000)
(a) 25.215 atm (b) 31.205 atm (c) 45.215 atm (d) 15.210 atm

Solution.

Answer: (a) 25.215 atm. n = 0.125 + 1 = 1.125 mol; P = 1.125 × 0.0821 × 273 = 25.2 atm.

Teacher's Note: Add moles of both gases and use PV = nRT.

Exam Note: Moles: O2 = 4/32, H2 = 2/2.

Set-1 Question 194. Density ratio of O2 and H2 is 16 : 1. The ratio of their rms velocities will be: (AIIMS 2000)
(a) 4 : 1 (b) 1 : 16 (c) 1 : 4 (d) 16 : 1

Solution.

Answer: (c) 1 : 4. At the same pressure u ∝ 1/√d, so u(O2) : u(H2) = 1 : 4.

Teacher's Note: urms = √(3P/d).

Exam Note: Heavier gas moves slower.

Set-1 Question 195. The rate of diffusion of a gas having molecular weight just double of nitrogen gas is 56 mL s−1. The rate of diffusion of nitrogen will be: (CPMT 2000)
(a) 79.19 mL s−1 (b) 112.0 mL s−1 (c) 56 mL s−1 (d) 90.0 mL s−1

Solution.

Answer: (a) 79.19 mL s−1. r(N2) = 56 × √2 = 79.19 mL/s.

Teacher's Note: Nitrogen is lighter by a factor 2, so faster by √2.

Exam Note: Rate ∝ 1/√M.

Set-1 Question 196. The density of air is 0.00130 g/mL. The vapour density of air will be: (DCE 2000)
(a) 0.00065 (b) 0.65 (c) 14.4816 (d) 14.56

Solution.

Answer: (d) 14.56. Density 1.30 g/L at STP gives M = 1.30 × 22.4 = 29.12; vapour density = M/2 = 14.56.

Teacher's Note: Vapour density is half the molar mass.

Exam Note: Convert density to g/L and multiply by 22.4.

Set-1 Question 197. If 300 mL of a gas at 27°C is cooled to 7°C at constant pressure, its final volume will be: (AIIMS 2000)
(a) 135 mL (b) 540 mL (c) 350 mL (d) 280 mL

Solution.

Answer: (d) 280 mL. V = 300 × 280/300 = 280 mL.

Teacher's Note: Charles' law with T in kelvin: 300 K to 280 K.

Exam Note: Convert °C to K.

Set-1 Question 198. For an ideal gas, number of moles per litre in terms of its pressure P, gas constant R and temperature T is: (AIEEE 2002)
(a) PT/R (b) PRT (c) P/RT (d) RT/P

Solution.

Answer: (c) P/RT. n/V = P/RT from PV = nRT.

Teacher's Note: Rearrange PV = nRT for n/V.

Exam Note: Concentration = P/RT.

Set-1 Question 199. The van der Waals' equation reduces itself to the ideal gas equation at: [MEE (Kerala) 2001; CBSE (PMT) 2002]
(a) high pressure and low temperature (b) low pressure and low temperature (c) low pressure and high temperature (d) high pressure alone

Solution.

Answer: (c) low pressure and high temperature. At low P (large V) and high T the correction terms a/V2 and b become negligible.

Teacher's Note: Ideal limit needs large volume and high energy.

Exam Note: Low P, high T.

Set-1 Question 200. Which of the following volume (V) – temperature (T) plots represents the behaviour of an ideal gas at one atmosphere pressure? [IIT (Screening) 2002; PET (Kerala) 2007] (five plots (a) to (e) of V(L) against T(K), each starting at 22.4 L at 273 K and ending at: (a) 36.8 L at 373 K, (b) 28.6 L at 373 K, (c) 30.6 L at 373 K, (d) 14.2 L at 373 K (falling), (e) 15 L at 373 K (falling))
(a) plot (a): 22.4 L at 273 K to 36.8 L at 373 K (b) plot (b): 22.4 L at 273 K to 28.6 L at 373 K (c) plot (c): 22.4 L at 273 K to 30.6 L at 373 K (d) plot (d): 22.4 L at 273 K to 14.2 L at 373 K (e) plot (e): 22.4 L at 273 K to 15 L at 373 K

Solution.

Answer: (c) plot (c): 22.4 L at 273 K to 30.6 L at 373 K. At constant P, V = 22.4 × 373/273 = 30.6 L at 373 K, which matches plot (c).

Teacher's Note: Charles' law: V rises in proportion to T.

Exam Note: Check the end point V = 22.4 × T/273.

Set-1 Question 201. The following is a method to determine the surface tension of liquids: [CET (J&K) 2007]
(a) single capillary method (b) refractometric method (c) polarimetric method (d) boiling point method

Solution.

Answer: (a) single capillary method. Capillary rise (single capillary method) gives surface tension.

Teacher's Note: Surface tension methods: capillary rise, drop number (stalagmometer), drop weight.

Exam Note: Name the capillary rise method.

Set-1 Question 202. The crystalline structure of NaCl is: [CET (J&K) 2007]
(a) hexagonal close packing (b) face-centred cubic (c) square planar (d) body-centred cubic

Solution.

Answer: (b) face-centred cubic. NaCl has a face-centred cubic arrangement of Cl− with Na+ in the octahedral voids.

Teacher's Note: NaCl is fcc with coordination number 6:6.

Exam Note: Mention Z = 4.

Set-1 Question 203. A crystal lattice with alternate +ve and −ve ions has radius ratio 0.524, its coordination number is: [PMT (Manipal) 2002]
(a) 4 (b) 3 (c) 6 (d) 12

Solution.

Answer: (c) 6. Ratio 0.524 lies in 0.414–0.732, so coordination number is 6.

Teacher's Note: Radius-ratio range 0.414–0.732 gives octahedral CN 6.

Exam Note: Match ratio to range.

Set-1 Question 204. The major binding force of diamond, silicon and quartz is: [MEE (Kerala) 2002]
(a) electrostatic force (b) electrical attraction (c) covalent bond force (d) non-covalent bond force (e) van der Waals' force

Solution.

Answer: (c) covalent bond force. These are network solids held by covalent bonds.

Teacher's Note: Diamond, Si and SiO2 are covalent network solids.

Exam Note: Name them as network solids.

Set-1 Question 205. A compound is formed by elements A and B. This crystallizes in the cubic structure when atoms A are at the corners of the cube and atoms B are at the centre of the body. The simplest formula of the compound is: (DPMT 2009)
(a) AB (b) AB2 (c) A2B (d) AB4

Solution.

Answer: (a) AB. A = 8 × 1/8 = 1, B = 1, so AB.

Teacher's Note: Corners give 1 A; body centre gives 1 B.

Exam Note: Count atoms per cell.

Set-1 Question 206. The coordination number of a metal crystallizing in a hexagonal close packed (hcp) structure is: [PET (MP) 2004]
(a) 6 (b) 12 (c) 8 (d) 4

Solution.

Answer: (b) 12. hcp has coordination number 12.

Teacher's Note: Close packing (hcp or ccp) gives CN 12.

Exam Note: Six in-plane, three above, three below.

Set-1 Question 207. The crystal system of a compound with unit cell dimensions a = 0.387, b = 0.387, c = 0.504 nm and α = β = 90° and γ = 120° is: (AIIMS 2004)
(a) cubic (b) hexagonal (c) orthorhombic (d) rhombohedral

Solution.

Answer: (b) hexagonal. a = b ≠ c with α = β = 90° and γ = 120° is hexagonal.

Teacher's Note: Hexagonal has γ = 120° with a = b ≠ c.

Exam Note: The 120° angle identifies it.

Set-1 Question 208. The maximum number of molecules is present in: [CBSE (PMT) 2004]
(a) 15 L of H2 gas at STP (b) 5 L of N2 gas at STP (c) 0.5 g of H2 gas (d) 10 g of O2 gas

Solution.

Answer: (a) 15 L of H2 gas at STP. Moles: 15/22.4 = 0.67; 5/22.4 = 0.22; 0.5/2 = 0.25; 10/32 = 0.31; the largest is 15 L H2.

Teacher's Note: Convert each option to moles; molecules are proportional to moles.

Exam Note: Compare 0.67, 0.22, 0.25 and 0.31.

Set-1 Question 209. The root mean square speed of one mole of a monoatomic gas having molar mass M is Urms. The relation between average kinetic energy (E) of the gas and Urms is: [IIT (S) 2004]
(a) Urms = √(3E/2M) (b) Urms = √(2E/3M) (c) Urms = √(2E/M) (d) Urms = √(E/3M)

Solution.

Answer: (c) Urms = √(2E/M). Corrected: the printed key gives (b), but E = (3/2)RT per mole gives Urms = √(2E/M), option (c). E = (3/2)RT per mole and Urms2 = 3RT/M, so Urms2 = 2E/M.

Teacher's Note: Eliminate RT between E = (3/2)RT and u2 = 3RT/M.

Exam Note: Check units: E/M is speed squared.

Set-1 Question 210. Which of the following is not a property of liquid state? [BHU (Pre) 2005]
(a) Intermolecular force of attraction in a liquid is quite large (b) All liquids accompanied by cooling on evaporation (c) Lower the boiling point of a liquid, greater is its vapour pressure at room temperature (d) A liquid boils at higher temperature at the top of a mountain than at the sea level

Solution.

Answer: (d) A liquid boils at higher temperature at the top of a mountain than at the sea level. At the top of a mountain external pressure is lower, so a liquid boils at a lower temperature, not higher.

Teacher's Note: Boiling needs vapour pressure equal to external pressure.

Exam Note: Lower pressure lowers boiling point.

Set-1 Question 211. A certain sample of a gas has a volume of 0.2 litre measured at 1 atm pressure and 0°C. At the same pressure but 273°C, its volume will be: [BHU (Pre) 2005]
(a) 0.4 L (b) 0.8 L (c) 27.8 L (d) 55.6 L

Solution.

Answer: (a) 0.4 L. V = 0.2 × 546/273 = 0.4 L.

Teacher's Note: Charles' law with T doubling from 273 K to 546 K.

Exam Note: Convert to kelvin first.

Set-1 Question 212. When electrons are trapped into the crystal in anion vacancy, the defect is known as: [BHU (Pre) 2005]
(a) Schottky defect (b) Frenkel defect (c) stoichiometric defect (d) F-centres

Solution.

Answer: (d) F-centres. Electrons trapped in anion vacancies form F-centres, which colour the crystal.

Teacher's Note: F-centre (Farbe = colour) is an electron in an anion vacancy.

Exam Note: Link to metal-excess defect.

Set-1 Question 213. In the equation of state of an ideal gas PV = nRT, the value of the universal gas constant R would depend only on the: (KCET 2005)
(a) nature of the gas (b) pressure of the gas (c) units of the measurement (d) none of these

Solution.

Answer: (c) units of the measurement. The numerical value of R depends only on units of P, V and T.

Teacher's Note: R is universal; units alone change its value.

Exam Note: Quote 0.0821 or 8.314.

Set-1 Question 214. If Z is the number of atoms in the unit cell that represents the closest packing sequence ABC ABC ..., the number of tetrahedral voids in the unit cell is equal to: (AIIMS 2005)
(a) Z (b) 2Z (c) Z/2 (d) Z/4

Solution.

Answer: (b) 2Z. There are 2 tetrahedral voids per atom, so 2Z.

Teacher's Note: Close packing gives 1 octahedral and 2 tetrahedral voids per atom.

Exam Note: For fcc, Z = 4 gives 8 voids.

Set-1 Question 215. Equation of Boyle's law is: (DPMT 2005)
(a) dP/P = −dV/V (b) dP/P = +dV/V (c) d2P/P = −dV/(dT/4) (d) d2P/P = +d2V/dt

Solution.

Answer: (a) dP/P = −dV/V. Hint: PV = constant, so P dV + V dP = 0, hence dP/P = −dV/V.

Teacher's Note: Differentiate PV = constant.

Exam Note: The minus sign shows P falls as V rises.

Set-1 Question 216. In a face-centred cubic unit cell, edge length is: (DPMT 2005)
(a) 4r/√3 (b) 4r/√2 (c) 2r (d) √3r/2

Solution.

Answer: (b) 4r/√2. Corrected: the printed key gives (a) 4r/√3, which is the bcc edge length; for fcc the edge is 4r/√2, option (b). In fcc atoms touch along the face diagonal: a√2 = 4r, so a = 4r/√2.

Teacher's Note: Face diagonal equals 4r in fcc.

Exam Note: Body diagonal 4r gives bcc instead.

Set-1 Question 217. If vrms is 30R1/2 at 27°C, then calculate the molar mass of the gas in kilogram: (DPMT 2005)
(a) 1 (b) 2 (c) 4 (d) 0.001

Solution.

Answer: (a) 1. Corrected: the printed key gives (d) 0.001 (hint: m = 0.001 kg), but 900R = 3 × R × 300/m gives m = 1 exactly; the printed answer comes from converting 1 g to kg without a basis. Needs a human check against the original question. vrms2 = 900R = 3R(300)/m, so m = 1 (in the units used for R).

Teacher's Note: Square both sides and cancel R: m = 3 × 300/900.

Exam Note: Keep units consistent with R.

Set-1 Question 218. The pressure exerted by 1 mole of methane in a 0.25 litre container at 300 K using van der Waals' equation (given a = 2.253 atm L2 mol−2, b = 0.0428 L mol−1) is: [JEE (Orissa) 2005]
(a) 82.82 atm (b) 152.51 atm (c) 190.52 atm (d) 70.52 atm

Solution.

Answer: (a) 82.82 atm. P = RT/(V − b) − a/V2 = 24.63/0.2072 − 2.253/0.0625 = 118.9 − 36.0 = 82.8 atm.

Teacher's Note: Use P = nRT/(V − nb) − an2/V2 with n = 1.

Exam Note: Subtract the attraction term last.

Set-1 Question 219. An ionic compound has a unit cell consisting of 'A' ions at the corners of a cube and 'B' ions on the centres of the faces of the cube. The empirical formula for this compound would be: [AIEEE 2005; CET (Karnataka) 2009]
(a) AB (b) A2B (c) AB3 (d) A3B

Solution.

Answer: (c) AB3. A = 8 × 1/8 = 1; B = 6 × 1/2 = 3, so AB3.

Teacher's Note: Corner counts 1/8 and face centre 1/2.

Exam Note: Count per-cell ions.

Set-1 Question 220. Which one of the following statements is not true about the effect of an increase in temperature on the distribution of molecular speeds in a gas?
(a) The most probable speed increases (b) The fraction of the molecules with most probable speed increases (c) The distribution becomes broader (d) The area under the distribution curve remains the same under the lower temperature

Solution.

Answer: (b) The fraction of the molecules with most probable speed increases. On heating, the peak flattens and moves right, so the fraction at the most probable speed decreases.

Teacher's Note: Higher T broadens the Maxwell curve and lowers its peak.

Exam Note: Total area (fraction) always stays 1.

Set-1 Question 221. A gas can be liquefied: (AFMC 2005)
(a) above its critical temperature (b) at its critical temperature (c) below its critical temperature (d) at any temperature

Solution.

Answer: (c) below its critical temperature. Pressure can liquefy a gas only below its critical temperature.

Teacher's Note: Above Tc no pressure liquefies a gas.

Exam Note: Cool below Tc, then compress.

Set-1 Question 222. If the absolute temperature of a gas is doubled and the pressure is reduced to one-half, the volume of the gas will: [PET (Kerala) 2005]
(a) remain unchanged (b) be doubled (c) increase fourfold (d) be halved (e) be reduced to one-fourth

Solution.

Answer: (c) increase fourfold. V2 = V1(T2/T1)(P1/P2) = 2 × 2 = 4 times.

Teacher's Note: Use P1V1/T1 = P2V2/T2.

Exam Note: Both changes increase V.

Set-1 Question 223. To what temperature must a neon gas sample be heated to double the pressure, if the initial volume of a gas at 75°C is decreased by 15%? [PET (Kerala) 2005]
(a) 319°C (b) 592°C (c) 128°C (d) 60°C (e) 90°C

Solution.

Answer: (a) 319°C. Hint: PV/348 = (2P × 0.85V)/T2, so T2 = 591.6 K = 318.6°C.

Teacher's Note: Apply the combined gas law with V2 = 0.85V1.

Exam Note: T1 = 348 K.

Set-1 Question 224. The surface tension of which of the following liquids is maximum? [CBSE (Pre) 2005]
(a) C2H5OH (b) CH3OH (c) H2O (d) C6H6

Solution.

Answer: (c) H2O. Hint: due to hydrogen bonding, H2O has the highest intermolecular force, hence its surface tension is also maximum.

Teacher's Note: Stronger intermolecular forces give higher surface tension.

Exam Note: Water is extensively hydrogen bonded.

Set-1 Question 225. An element (with atomic mass = 250 g) crystallises in a simple cube. If the density of unit cell is 7.2 g cm−3, what is the radius of the element? [JEE (Orissa) 2006]
(a) 1.93 × 10−6 cm (b) 1.93 × 10−8 cm (c) 1.93 × 10−8 Å (d) 1.93 × 10−8 m

Solution.

Answer: (b) 1.93 × 10−8 cm. Hint: a3 = M/(ρNA) = 250/(7.2 × 6.023 × 1023); a = 3.86 × 10−8 cm; r = a/2 = 1.93 × 10−8 cm.

Teacher's Note: Simple cubic has Z = 1 and r = a/2.

Exam Note: Take a cube root, then halve.

Set-1 Question 226. Dominance of strong repulsive forces among the molecules of the gas (Z = compressibility factor): (AIIMS 2006)
(a) depends on Z and indicated by Z = 1 (b) depends on Z and indicated by Z > 1 (c) depends on Z and indicated by Z < 1 (d) is independent of Z

Solution.

Answer: (b) depends on Z and indicated by Z > 1. Hint: when Z > 1, the gas is less compressible than ideal gas and the repulsive forces dominate.

Teacher's Note: Z > 1 means repulsion dominates; Z < 1 means attraction dominates.

Exam Note: State both cases.

Set-1 Question 227. Total volume of atoms present in a face-centred cubic unit cell of a metal is (r is atomic radius): (AIEEE 2006)
(a) (20/3)πr3 (b) (24/3)πr3 (c) (12/3)πr3 (d) (16/3)πr3

Solution.

Answer: (d) (16/3)πr3. 4 atoms × (4/3)πr3 = (16/3)πr3.

Teacher's Note: fcc has 4 atoms per unit cell.

Exam Note: Multiply atom volume by 4.

Set-1 Question 228. If we know the ionic radius ratio in a crystal of ionic solid, what can be known of the following? [CET (Gujarat) 2006]
(a) Magnetic property (b) Nature of chemical bond (c) Type of defect (d) Geometrical shape of crystal

Solution.

Answer: (d) Geometrical shape of crystal. The radius ratio fixes the coordination number and hence the geometry of the crystal.

Teacher's Note: Radius ratio decides coordination number and geometry.

Exam Note: Link ratio to shape.

Set-1 Question 229. If a volume containing gas is compressed to half, how many moles of gas remained in the vessel? (DCE 2006)
(a) Just double (b) Just half (c) Same (d) More than double

Solution.

Answer: (c) Same. Compression does not change the amount of gas, so moles remain the same.

Teacher's Note: Moles depend on mass, not on volume.

Exam Note: Compression changes P, not n.

Set-1 Question 230. The volume–temperature graphs of a given mass of an ideal gas at constant pressures are shown (three straight lines P1, P2, P3 from the same intercept at 0 K, P3 steepest and P1 least steep). What is the correct order of pressures? (EAMCET 2006; AIIMS 2008)
(a) P1 > P3 > P2 (b) P1 > P2 > P3 (c) P2 > P3 > P1 (d) P2 > P1 > P3

Solution.

Answer: (b) P1 > P2 > P3. Slope of V–T is nR/P, so the steeper the line, the lower the pressure: P1 > P2 > P3.

Teacher's Note: Slope = nR/P: larger slope means smaller P.

Exam Note: Compare steepness of the lines.

Set-1 Question 231. If NaCl is doped with 10−4 mol % of SrCl2, the concentration of cation vacancies will be (NA = 6.023 × 1023): [CBSE (Medical) 2007]
(a) 6.02 × 1016 mol−1 (b) 6.02 × 1017 mol−1 (c) 6.02 × 1014 mol−1 (d) 6.02 × 1015 mol−1

Solution.

Answer: (b) 6.02 × 1017 mol−1. Each Sr2+ creates one cation vacancy: 10−4% = 10−6 mol per mole, giving 10−6 × 6.023 × 1023 = 6.02 × 1017 mol−1.

Teacher's Note: One Sr2+ replaces two Na+, leaving one vacancy.

Exam Note: Convert mol % to mole fraction first.

Set-1 Question 232. Coordination number of NaCl crystal will be: [PET (MP) 2007]
(a) 8 : 8 (b) 6 : 6 (c) 4 : 4 (d) 2 : 2

Solution.

Answer: (b) 6 : 6. NaCl has 6:6 coordination.

Teacher's Note: NaCl: each ion has six oppositely charged neighbours.

Exam Note: Quote 6:6.

Set-1 Question 233. The unit cell of Al (molar mass 27 g mol−1) has an edge length of 405 pm. Its density is 2.7 g/cm3. The cubic unit cell is: [PET (Kerala) 2007]
(a) face-centred (b) body-centred (c) primitive (d) edge-centred (e) simple

Solution.

Answer: (a) face-centred. Hint: Z = a3dNA/M = (405 × 10−10)3 × 2.7 × 6.023 × 1023/27 = 4, so it is face-centred.

Teacher's Note: Compute Z from density; Z = 4 means fcc.

Exam Note: Use a in cm.

Set-1 Question 234. The 8 : 8 type packing is present in: (VITEEE 2007)
(a) MgF2 (b) CsCl (c) KCl (d) NaCl

Solution.

Answer: (b) CsCl. Corrected: the printed key gives (a) MgF2, but MgF2 has 6:3 coordination; 8:8 coordination is that of CsCl, so the answer is (b). CsCl has 8:8 coordination; NaCl and KCl are 6:6 and MgF2 is 6:3.

Teacher's Note: CsCl structure: simple cubic Cl− with Cs+ at body centre.

Exam Note: 8:8 means CsCl type.

Set-1 Question 235. Equal masses of methane and oxygen are mixed in an empty container at 25°C. The fraction of the total pressure exerted by oxygen is: [AIEEE 2007; EAMCET (Med.) 2010]
(a) 1/2 (b) 2/3 (c) (1/3) × (273/298) (d) 1/3

Solution.

Answer: (d) 1/3. n(CH4) = w/16, n(O2) = w/32; x(O2) = 1/3.

Teacher's Note: Pressure fraction equals mole fraction.

Exam Note: Temperature does not enter.

Set-1 Question 236. Percentage of free space in a body centred cubic unit cell is: [CBSE (PMT) 2008]
(a) 34% (b) 28% (c) 30% (d) 32%

Solution.

Answer: (d) 32%. Packing efficiency of bcc is 68%, so free space is 32%.

Teacher's Note: bcc fills 68% of space.

Exam Note: Free space = 100 − 68.

Set-1 Question 237. Which one of the following statements is not correct? [CBSE (PMT) 2008]
(a) The number of carbon atoms in a unit cell of diamond is 4. (b) The number of Bravis lattices in which a crystal can be categorized is 14. (c) The fraction of the total volume occupied by the atoms in a primitive cell is 0.48. (d) Molecular solids are generally volatile.

Solution.

Answer: (c) The fraction of the total volume occupied by the atoms in a primitive cell is 0.48.. A primitive (simple cubic) cell has packing fraction π/6 = 0.52, not 0.48. Note: statement (a) is also inaccurate, since a diamond unit cell contains 8 carbon atoms; the book key marks (c).

Teacher's Note: Simple cubic packing fraction is π/6 = 0.524.

Exam Note: Check each number against standard values.

Set-1 Question 238. If a stands for the edge length of the cubic systems: simple cubic, body centred cubic and face centred cubic, then the ratio of radii of the spheres in these systems will be respectively: [CBSE (PMT) 2008]
(a) (1/2)a : (√3/2)a : (√2/2)a (b) 1a : √3a : √2a (c) (1/2)a : (√3/4)a : (1/(2√2))a (d) (1/2)a : √3a : (1/√2)a

Solution.

Answer: (c) (1/2)a : (√3/4)a : (1/(2√2))a. Hint: simple cubic r = a/2; bcc r = a√3/4; fcc r = a/(2√2).

Teacher's Note: Contact directions: edge, body diagonal, face diagonal.

Exam Note: Write r for each lattice.

Set-1 Question 239. The term that corrects for the attractive forces present in a real gas in the van der Waals' equation is: (IIT 2009)
(a) nb (b) an2/V2 (c) −an2/V2 (d) −nb

Solution.

Answer: (b) an2/V2. The pressure correction an2/V2 is added to P to account for attraction.

Teacher's Note: Attraction lowers pressure, so the term is added to P.

Exam Note: Contrast with the volume term nb.

Set-1 Question 240. Which is not the correct statement for ionic solids in which positive and negative ions are held by strong electrostatic attractive forces? (DCE 2009)
(a) The ratio r+/r− increases as coordination number increases (b) As the difference in size of ions increases coordination number increases (c) When coordination number is eight, the r+/r− ratio lies between 0.225–0.414 (d) In ionic solid of the type AX (ZnS, Wurtzite) the coordination number of Zn2+ and S2− respectively are 4 and 4

Solution.

Answer: (c) When coordination number is eight, the r+/r− ratio lies between 0.225–0.414. CN 8 corresponds to a radius ratio of 0.732–1.0, not 0.225–0.414 (that is CN 4). Note: statement (b) is also incorrect in standard theory, since a larger size difference lowers the ratio and the coordination number; the book key marks (c).

Teacher's Note: Radius ratio ranges: 0.225–0.414 (CN 4), 0.414–0.732 (CN 6), 0.732–1.0 (CN 8).

Exam Note: Match each range to its coordination number.

Set-1 Question 241. The packing efficiency of the two-dimensional square unit cell shown (circles of radius r placed at the four corners and touching one circle at the centre along the diagonal; edge length L) is: (IIT 2010)
(a) 39.27% (b) 68.02% (c) 74.05% (d) 78.54%

Solution.

Answer: (d) 78.54%. Hint: a√2 = 4r, so a = 2√2 r. Packing fraction = (occupied area/total area) × 100 = 2πr2/(2√2 r)2 × 100 = 78.5%.

Teacher's Note: Two circles per cell (4 corners × 1/4 + 1 centre); cell edge from diagonal 4r.

Exam Note: Area ratio is π/4.

Objective Questions: Set-2 (More Than One Correct Answer)

Set-2 Question 1. If force of attraction between the molecules is negligible, van der Waals' equation (for one mole) will become:
(a) PV = RT + Pb (b) P = RT/(V − b) − a/V2 (c) PV = RT + a/V (d) PV = RT − a/V

Solution.

Answer: (a) PV = RT + Pb. With a = 0, P(V − b) = RT, i.e. PV = RT + Pb.

Teacher's Note: Setting a = 0 removes the attraction correction.

Exam Note: Expand P(V − b) = RT.

Set-2 Question 2. van der Waals' equation: Match Column I with Column II. A. High pressure; B. Low pressure; C. Force of attraction is negligible; D. Volume of molecules is negligible. (i) PV = RT + Pb (ii) PV = RT − a/V (iii) PV = RT + a/V (iv) (P + a/V2)(V − b) = RT
(a) A (iv), B (ii), C (i), D (iii) (b) A (i), B (ii), C (iii), D (iv) (c) A (iv), B (iii), C (ii), D (i) (d) A (iv), B (ii), C (iii), D (i)

Solution.

Answer: (a) A (iv), B (ii), C (i), D (iii). Answer as printed in the book key. Parts B (ii) and C (i) agree with the limits b neglected and a neglected; the book's matching of the other parts is not derivable from the printed column entries, so this item needs a human check.

Teacher's Note: For C set a = 0 to get PV = RT + Pb; at low pressure neglect b.

Exam Note: Check each limit by dropping a or b.

Set-2 Question 3. van der Waals' constants for three different gases are given: X (a = 3.0, b = 0.025), Y (a = 10.0, b = 0.030), Z (a = 6.0, b = 0.035). Which is correct?
(a) Maximum critical temperature — Y (b) Most ideal behaviour — X (c) Maximum molecular volume — Z (d) All are correct

Solution.

Answer: (d) All are correct. Tc = 8a/27Rb is largest for Y (about 99 in these units, against 36 for X and 51 for Z); X has the smallest a so is most ideal; Z has the largest b so the largest molecular volume.

Teacher's Note: Tc ∝ a/b; small a means near ideal; b measures molecular size.

Exam Note: Compute a/b for each gas.

Set-2 Question 4. What is the ratio of mean speed of an O3 molecule to the rms speed of an O2 molecule at the same T?
(a) (3π/7)1/2 (b) (16/9π)1/2 (c) (3π)1/2 (d) (4π/9)1/2

Solution.

Answer: (b) (16/9π)1/2. Ratio = √(8RT/π48) / √(3RT/32) = √(256/(144π)) = √(16/9π).

Teacher's Note: Write both speed formulas with M = 48 and 32 and divide.

Exam Note: Mean speed has 8/π; rms has 3.

Set-2 Question 5. Boyle's law may be represented as (K = constant):
(a) (dP/dV)T = K/V (b) (dP/dV)T = −K/V (c) (dP/dV)T = −K/V2 (d) (dP/dV)T = K/V2

Solution.

Answer: (c) (dP/dV)T = −K/V2. Corrected: the printed key gives (a), but differentiating P = K/V gives −K/V2, which is option (c). P = K/V, so dP/dV = −K/V2.

Teacher's Note: Differentiate P = K/V at constant T.

Exam Note: The slope of an isotherm is negative.

Set-2 Question 6. If pressure of a gas is increased by 1% when heated by 1°C, its initial temperature must be:
(a) 100 K (b) 100°C (c) 250 K (d) 250°C

Solution.

Answer: (a) 100 K. At constant V, ΔP/P = ΔT/T: 0.01 = 1/T, so T = 100 K.

Teacher's Note: Gay-Lussac: fractional change in P equals fractional change in T.

Exam Note: Use kelvin.

Set-2 Question 7. Which of the following are not the units of gas constant, R?
(a) dyne K−1 mol−1 (b) erg deg−1 mol−1 (c) cm3 K−1 mol−1 (d) kPa dm3 K−1 mol−1

Solution.

Answer: (a) dyne K−1 mol−1; (c) cm3 K−1 mol−1. R has units of energy per kelvin per mole. Erg and kPa dm3 (= J) are energy units, but dyne alone is force and cm3 alone is volume.

Teacher's Note: Gas constant unit = energy K−1 mol−1 (or pressure × volume).

Exam Note: Check the dimension of each option.

Set-2 Question 8. According to Charles' law:
(a) V ∝ 1/T (b) (dV/dT)P = K (c) (dT/dV)P = K (d) (1/T − V/T2)P = 0

Solution.

Answer: (b) (dV/dT)P = K; (c) (dT/dV)P = K; (d) (1/T − V/T2)P = 0. V ∝ T gives (dV/dT)P = K and (dT/dV)P = 1/K = constant; d(V/T) = 0 gives (1/T − V/T2) = 0 on differentiating.

Teacher's Note: Charles' law: V/T is constant at fixed P, so its derivatives are constants or zero.

Exam Note: V is proportional to T, not 1/T.

Set-2 Question 9. In the following statements: (A) ideal gases are liquefied at very low temperatures (B) ideal gases cannot be liquefied (C) ideal gas behaviour is observed by real gases at low pressures (D) ideal gases do not exist. The correct statements are: (ISAT 2010)
(a) A, B, C and D (b) A, B and C (c) B, C and D (d) C and D

Solution.

Answer: (c) B, C and D. Ideal gases have no attraction so cannot be liquefied (B); real gases are nearly ideal at low pressure (C); no real gas is truly ideal (D). (A) is false.

Teacher's Note: Ideal gas has no intermolecular forces, so no liquefaction.

Exam Note: Pick B, C and D.

Set-2 Question 10. Which of the following relationships is/are not true?
(a) Most probable velocity = √(2RT/M) (b) PV = (3/2)kT (c) Compressibility factor Z = PV/nRT (d) Average kinetic energy of gas = (1/2)kT

Solution.

Answer: (b) PV = (3/2)kT; (d) Average kinetic energy of gas = (1/2)kT. Corrected: the printed key gives (d) only, but (b) PV = (3/2)kT is also not true, so the answer is (b) and (d). PV = nRT (= NkT), not (3/2)kT, and the average translational kinetic energy per molecule is (3/2)kT, not (1/2)kT. (a) and (c) are correct.

Teacher's Note: (3/2)kT is the average KE per molecule, not PV.

Exam Note: Check each formula against standard results.

Set-2 Question 11. According to kinetic theory of gases: (IIT 1991)
(a) the pressure exerted by a gas is proportional to mean square velocity of the molecules (b) the pressure exerted by the gas is proportional to the root mean square velocity of the molecules (c) the root mean square velocity is inversely proportional to the temperature (d) the mean translational KE of the molecule is directly proportional to the absolute temperature

Solution.

Answer: (a) the pressure exerted by a gas is proportional to mean square velocity of the molecules; (d) the mean translational KE of the molecule is directly proportional to the absolute temperature. Corrected: the printed key gives (b) and (d), but pressure is proportional to the mean square (not rms) speed; the correct answers are (a) and (d). P = (1/3)(mN/V)u2 is proportional to mean square speed, and KE = (3/2)kT is proportional to T. urms varies as √T, not 1/T.

Teacher's Note: P ∝ mean square speed; KE ∝ T.

Exam Note: rms speed is not inversely proportional to T.

Set-2 Question 12. A gas described by van der Waals' equation: (IIT 2008)
(a) behaves similar to an ideal gas in the limit of large molar volume (b) behaves similar to an ideal gas in the limit of large pressures (c) is characterised by van der Waals' constants that are dependent on identity of the gas but are independent of the temperature (d) has the pressure that is lower than the pressure exerted by the same gas behaving ideally

Solution.

Answer: (a) behaves similar to an ideal gas in the limit of large molar volume; (c) is characterised by van der Waals' constants that are dependent on identity of the gas but are independent of the temperature. At large molar volume the a/V2 and b terms vanish, so the gas is ideal; a and b depend on the gas, not on T. At large pressure the gas is strongly non-ideal.

Teacher's Note: Large V means low density and ideal behaviour.

Exam Note: a and b are fixed for each gas.

Assertion-Reason Type Questions

Assertion-Reason Question 1. (A) The heat absorbed during the isothermal expansion of an ideal gas against vacuum is zero.
(R) The volume occupied by the molecules of an ideal gas is zero. (IIT 2000)
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A). Against vacuum no work is done and ΔU = 0 for an ideal gas, so q = 0 (A true). Zero molecular volume is an ideal-gas assumption (R true) but does not explain A.

Teacher's Note: Free expansion: w = 0 and ΔU = 0 at constant T, so q = 0.

Exam Note: Link the reason to no work done, not molecular volume.

Assertion-Reason Question 2. (A) The pressure of a fixed amount of an ideal gas is proportional to its temperature.
(R) Frequency of collisions and their impact both increase in proportion to square root of temperature. (IIT 2000)
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (a) Both (A) and (R) are correct, and (R) is the correct explanation of (A). Corrected: the printed key gives (c) (R incorrect), but both factors in (R) do vary as √T and together give P ∝ T at constant volume, so (R) is true and explains (A); the answer is (a). Needs a human check. At constant volume P ∝ T (A). Collision frequency ∝ √T and momentum per collision ∝ √T, so pressure ∝ T (R true and explains A).

Teacher's Note: Both collision rate and impact vary as √T, so their product varies as T.

Exam Note: State the constant-volume condition.

Assertion-Reason Question 3. (A) CP − CV = R for an ideal gas.
(R) (∂E/∂V)T = 0 for an ideal gas.
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A). Both statements are true; the book key marks (R) as not the explanation (this item is a judgement call).

Teacher's Note: CP − CV = R is derived for ideal gas using E depends only on T.

Exam Note: Quote both relations.

Assertion-Reason Question 4. (A) A lighter gas diffuses more rapidly than a heavier gas.
(R) At a given temperature, the rate of diffusion of a gas is inversely proportional to the square root of its density.
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (a) Both (A) and (R) are correct, and (R) is the correct explanation of (A). Graham's law r ∝ 1/√d explains why lighter gases diffuse faster.

Teacher's Note: Rate ∝ 1/√(density) at fixed T and P.

Exam Note: Name Graham's law.

Assertion-Reason Question 5. (A) On cooling, the brown colour of nitrogen dioxide disappears.
(R) On cooling, NO2 undergoes dimerisation resulting in the pairing of the odd electrons in NO2.
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (a) Both (A) and (R) are correct, and (R) is the correct explanation of (A). Brown NO2 (odd electron) dimerises to colourless N2O4 on cooling.

Teacher's Note: 2NO2 → N2O4 pairs the odd electrons.

Exam Note: Write the dimerisation equation.

Assertion-Reason Question 6. (A) The value of the van der Waals' constant 'a' is larger for ammonia than for nitrogen.
(R) Hydrogen bonding is present in ammonia.
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (a) Both (A) and (R) are correct, and (R) is the correct explanation of (A). Hydrogen bonding makes attraction in NH3 stronger, so its a is larger.

Teacher's Note: Larger a means stronger intermolecular attraction.

Exam Note: Link hydrogen bonding to a.

Assertion-Reason Question 7. (A) The Joule-Thomson coefficient for the ideal gas is zero.
(R) There are no intermolecular attractive forces in an ideal gas.
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (a) Both (A) and (R) are correct, and (R) is the correct explanation of (A). With no attraction, no energy is spent on expansion, so no temperature change occurs.

Teacher's Note: Joule–Thomson cooling comes from work against attractive forces.

Exam Note: Ideal gas has none.

Assertion-Reason Question 8. (A) At 27°C, the kinetic energy of 8 gram of methane is equal to the kinetic energy of 16 gram of oxygen.
(R) The total heat change in a reaction is the same whether the chemical reaction takes place in one single step or in several steps. (EAMCET 2006)
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A). 8 g CH4 and 16 g O2 are 0.5 mol each at the same T, so KE is equal (A true). Hess's law (R) is true but unrelated.

Teacher's Note: Equal moles at the same T have equal total KE.

Exam Note: R is Hess's law, unrelated to A.

Assertion-Reason Question 9. (A) A closed cylinder containing high pressure gas tends to rise against gravity when the gas is allowed to escape through an orifice at the bottom.
(R) The velocity of escaping gas develops an upward thrust proportional to the area of cross-section of the orifice. (SCRA 2007)
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (c) (A) is correct, but (R) is incorrect. Hint: assertion is correct but reason is wrong as the velocity of escaping gas is inversely proportional to the area of cross-section of orifice.

Teacher's Note: Escaping gas gives a reaction thrust (rocket effect).

Exam Note: Reason as stated is wrong.

Assertion-Reason Question 10. (A) Meniscus of a liquid disappears at the critical temperature.
(R) Density of liquid and its gaseous phase become equal at the critical temperature. [BHU (Screening) 2008]
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (a) Both (A) and (R) are correct, and (R) is the correct explanation of (A). At Tc liquid and vapour densities become equal, so the meniscus vanishes.

Teacher's Note: Equal densities remove the liquid–vapour boundary.

Exam Note: Link meniscus to equal densities.

Assertion-Reason Question 11. (A) Graphite is soft while diamond is hard.
(R) Graphite has three dimensional structure while diamond has planar. [BHU (Screening) 2008]
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (c) (A) is correct, but (R) is incorrect. Graphite has layered (planar) sheets and diamond a 3D network, so (A) is true and (R) is reversed.

Teacher's Note: Layers slide in graphite; the 3D covalent network makes diamond hard.

Exam Note: Reason is reversed.

Assertion-Reason Question 12. (A) White tin is an example of tetragonal system.
(R) For tetragonal system a = b = c and α = β = γ ≠ 90°.
(a) Both (A) and (R) are correct, and (R) is the correct explanation of (A) (b) Both (A) and (R) are correct, but (R) is not the correct explanation of (A) (c) (A) is correct, but (R) is incorrect (d) (A) is incorrect, but (R) is correct

Solution.

Answer: (c) (A) is correct, but (R) is incorrect. White tin is tetragonal (A true), but tetragonal has a = b ≠ c with all angles 90°, so (R) is false.

Teacher's Note: Tetragonal: a = b ≠ c, α = β = γ = 90°.

Exam Note: Reason describes rhombohedral.

Assertion-Reason Question 13. (A) Sulphur dioxide and chlorine are both bleaching agents.
(R) Both are reducing agents. (AIIMS 1994)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (c) (A) is true but (R) is false. Both bleach (A true), but chlorine bleaches by oxidation, so (R) is false.

Teacher's Note: SO2 bleaches by reduction, Cl2 by oxidation.

Exam Note: Reason fails for chlorine.

Assertion-Reason Question 14. (A) Nitrogen is unreactive at room temperature but becomes reactive at elevated temperatures (on heating or in the presence of catalysts).
(R) In nitrogen molecule, there is extensive delocalisation of electrons. (AIIMS 1996)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (c) (A) is true but (R) is false. (A) is true because of the strong N≡N triple bond; (R) is false as electrons are localised in the triple bond.

Teacher's Note: The unreactivity arises from the very strong N≡N bond.

Exam Note: Reason about delocalisation is false.

Assertion-Reason Question 15. (A) Noble gases can be liquefied.
(R) Attractive forces can exist between non-polar molecules. (AIIMS 1998)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (a) Both (A) and (R) are true and (R) is the correct explanation for (A). London dispersion forces between non-polar atoms allow noble gases to liquefy at low temperature.

Teacher's Note: Dispersion forces act between all atoms and molecules.

Exam Note: Link liquefaction to attraction.

Assertion-Reason Question 16. (A) Under similar conditions of temperature and pressure, O2 diffuses 1.4 times faster than SO2.
(R) Density of SO2 is 1.4 times greater than that of O2.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (c) (A) is true but (R) is false. Rate ratio = √(64/32) = 1.41 (A true), but density ratio is 2, not 1.4 (R false).

Teacher's Note: Rate ratio uses the square root of density ratio.

Exam Note: Density ratio is 2.

Assertion-Reason Question 17. (A) On compressing a gas to half the volume, the number of moles is halved.
(R) The number of moles present decreases with decrease in volume.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (d) Both (A) and (R) are false. Compression changes volume, not the number of moles, so both statements are false.

Teacher's Note: Moles are fixed by mass, not by volume.

Exam Note: Both are false.

Assertion-Reason Question 18. (A) The plot of volume (V) versus pressure (P) at constant temperature is a hyperbola in the first quadrant.
(R) V ∝ 1/P at constant temperature.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (a) Both (A) and (R) are true and (R) is the correct explanation for (A). V = k/P is a rectangular hyperbola, which is the explanation of the plot.

Teacher's Note: Inverse proportionality gives a hyperbola.

Exam Note: Name Boyle's law.

Assertion-Reason Question 19. (A) At constant temperature, if pressure on the gas is doubled, density is also doubled.
(R) At constant temperature, molecular mass of a gas is directly proportional to the density and inversely proportional to the pressure.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (a) Both (A) and (R) are true and (R) is the correct explanation for (A). Corrected: the printed key gives (c), but (R) as printed (M ∝ d and M ∝ 1/P at constant T) is true, so (A) follows from it and the answer is (a). Needs a human check. M = dRT/P is directly proportional to d and inversely to P, so d ∝ P at fixed T and M: both true and R explains A.

Teacher's Note: From d = PM/RT, d ∝ P at constant T.

Exam Note: Mass is constant for the same gas.

Assertion-Reason Question 20. (A) If H2 and Cl2 enclosed separately in the same vessel exert pressures of 100 and 200 mm respectively, their mixture in the same vessel at the same temperature will exert a pressure of 300 mm.
(R) Dalton's law of partial pressures states that total pressure is the sum of partial pressures.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (a) Both (A) and (R) are true and (R) is the correct explanation for (A). Corrected: the printed key gives (d) (both false), but both statements are true, so the answer is (a). Needs a human check. Total pressure is 100 + 200 = 300 mm; even if H2 and Cl2 react to HCl, the total number of moles is unchanged, so the pressure stays 300 mm. Dalton's law explains it.

Teacher's Note: Mixture pressure is the sum of partial pressures; H2 + Cl2 → 2HCl keeps moles constant.

Exam Note: Add the two pressures.

Assertion-Reason Question 21. (A) Most probable velocity is the velocity possessed by maximum fraction of molecules at the same temperature.
(R) On collision, more and more molecules acquire higher speed at the same temperature.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (c) (A) is true but (R) is false. (A) is the definition of the most probable speed; (R) is false since collisions only redistribute speeds, keeping the distribution fixed at a given T.

Teacher's Note: Maxwell distribution is steady at fixed T.

Exam Note: Reason is false.

Assertion-Reason Question 22. (A) Compressibility factor (Z) for non-ideal gases is always greater than 1.
(R) Non-ideal gases always exert higher pressure than expected.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (d) Both (A) and (R) are false. Z can be less than 1 (attraction dominates) and real gases can exert lower pressure, so both are false.

Teacher's Note: Z < 1 at moderate pressure for most gases.

Exam Note: Both statements say "always", which is false.

Assertion-Reason Question 23. (A) van der Waals' equation is applicable only to non-ideal gases.
(R) Ideal gases obey the equation PV = nRT.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (b) Both (A) and (R) are true but (R) is not the correct explanation for (A). Both statements are true; R states the ideal gas law but does not explain why vdW applies only to real gases.

Teacher's Note: vdW adds corrections that vanish for ideal gases.

Exam Note: R is true but not the reason.

Assertion-Reason Question 24. (A) Helium shows only positive deviations from ideal behaviour.
(R) Helium is an inert gas.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (b) Both (A) and (R) are true but (R) is not the correct explanation for (A). Both are true (Z > 1 at all pressures for He because of its very weak attraction), but being inert does not explain this.

Teacher's Note: Helium has negligible attraction, so repulsion dominates.

Exam Note: Inertness is chemical, not the reason.

Assertion-Reason Question 25. (A) Gases are easily absorbed on the surface of metals, especially transition metals.
(R) Transition metals have free valencies.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (a) Both (A) and (R) are true and (R) is the correct explanation for (A). Free valencies on transition metal surfaces bind gas molecules (adsorption).

Teacher's Note: Surface free valencies cause adsorption.

Exam Note: Link chemisorption to free valencies.

Assertion-Reason Question 26. (A) SO2 gas is easily liquefied while H2 is not.
(R) SO2 has low critical temperature while H2 has high critical temperature.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (c) (A) is true but (R) is false. (A) is true; (R) is reversed: SO2 has a high critical temperature (431 K) and H2 a very low one (33 K).

Teacher's Note: Easy liquefaction needs a high Tc.

Exam Note: Reason is reversed.

Assertion-Reason Question 27. (A) Diffusion is used in the enrichment of U235.
(R) A lighter gas diffuses more rapidly than a heavier gas.
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (b) Both (A) and (R) are true but (R) is not the correct explanation for (A). Both statements are true; the book key marks (R) as not the explanation (a judgement call, since gaseous diffusion of UF6 relies on Graham's law).

Teacher's Note: U235F6 diffuses slightly faster than U238F6.

Exam Note: Name Graham's law.

Assertion-Reason Question 28. (A) Crystalline solids can cause X-rays to diffract.
(R) Interatomic distance in crystalline solids is of the order of 0.1 nm. (AIIMS 2004)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (a) Both (A) and (R) are true and (R) is the correct explanation for (A). Corrected: the printed key gives (c), but 0.1 nm (1 Å) is indeed the order of interatomic distances and is why X-rays diffract, so (R) is true and explains (A); the answer is (a). X-ray wavelength (about 0.1 nm) is of the order of interatomic spacing, so the crystal acts as a diffraction grating (A true, R true and explains).

Teacher's Note: Diffraction needs wavelength comparable to spacing.

Exam Note: Link 0.1 nm to X-ray wavelength.

Assertion-Reason Question 29. (A) The effusion rate of oxygen is smaller than that of nitrogen.
(R) Molecular size of nitrogen is smaller than that of oxygen. (AIIMS 2004)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (c) (A) is true but (R) is false. (A) is true since M(O2) > M(N2); (R) is false because N2 is slightly larger than O2. The effusion rate depends on molar mass, not size.

Teacher's Note: Effusion rate depends on molar mass.

Exam Note: Reason is false.

Assertion-Reason Question 30. (A) The compressibility factor for hydrogen varies with pressure with positive slope at all pressures.
(R) Even at low pressures, the repulsive forces dominate in hydrogen gas. (AIIMS 2005)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (a) Both (A) and (R) are true and (R) is the correct explanation for (A). Hydrogen has very weak attraction, so Z > 1 and rises with pressure at all pressures.

Teacher's Note: H2 has negligible attraction, so repulsion dominates at all P.

Exam Note: Z increases with P for H2 at 0°C.

Assertion-Reason Question 31. (A) Graphite is an example of tetragonal crystal system.
(R) For a tetragonal system a = b ≠ c, α = β = 90° and γ = 120°. (AIIMS 2006)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (d) Both (A) and (R) are false. Graphite is hexagonal and tetragonal has γ = 90°, so both statements are false.

Teacher's Note: Graphite is hexagonal; 120° belongs to hexagonal.

Exam Note: Both are false.

Assertion-Reason Question 32. (A) No compound has both Schottky and Frenkel defects.
(R) Both defects change the density of the solid. (AIIMS 2008)
(a) Both (A) and (R) are true and (R) is the correct explanation for (A) (b) Both (A) and (R) are true but (R) is not the correct explanation for (A) (c) (A) is true but (R) is false (d) Both (A) and (R) are false

Solution.

Answer: (d) Both (A) and (R) are false. AgBr shows both defects, and Frenkel defect does not change density, so both statements are false.

Teacher's Note: AgBr has both defects; Frenkel keeps density unchanged.

Exam Note: Both are false.

Brain Storming Problems: Objective Questions for IIT Aspirants (Single Correct Option)

Brain Storming Question 1. Which of the following graphs is not a straight line for an ideal gas?
(a) V → T (b) T → P (c) n → 1/T (d) n → 1/P

Solution.

Answer: (d) n → 1/P. n = PV/RT is linear in 1/T at fixed P and V, but n against 1/P is a hyperbola (n ∝ P).

Teacher's Note: Check each plot against PV = nRT with the other variables fixed.

Exam Note: n versus 1/P is hyperbolic, not linear.

Brain Storming Question 2. The quantity (PV/kBT) represents the:
(a) number of molecules in the gas (b) mass of the gas (c) number of moles of the gas (d) translational energy of the gas

Solution.

Answer: (a) number of molecules in the gas. Hint: n = PV/RT; number of molecules = NAPV/RT = PV/(R/NA)T = PV/kBT.

Teacher's Note: PV = NkT, so PV/kT = N.

Exam Note: kB = R/NA.

Brain Storming Question 3. 1 litre of N2 and 7/8 litre of O2 at the same temperature and pressure were mixed together. What is the relation between the masses of the two gases in the mixture?
(a) MN2 = 3MO2 (b) MN2 = 8MO2 (c) MN2 = MO2 (d) MN2 = 16MO2

Solution.

Answer: (c) MN2 = MO2. Hint: P × 1 = (mN2/28)RT and P × 7/8 = (mO2/32)RT. Dividing gives mN2 = mO2. (Here M stands for mass.)

Teacher's Note: At equal T and P, moles are proportional to volume: 1 : 7/8, i.e. 8 : 7.

Exam Note: Moles 8 : 7 times masses 28 : 32 gives equal mass.

Brain Storming Question 4. A box is divided into two equal compartments by a thin partition and they are filled with gases X and Y respectively. The two compartments have a pressure of 250 torr each. The pressure after removing the partition will be equal to:
(a) 125 torr (b) 500 torr (c) 250 torr (d) 750 torr

Solution.

Answer: (c) 250 torr. Total moles and total volume both double, so the pressure stays 250 torr.

Teacher's Note: Equal P, V and T in each half: mixing keeps P unchanged.

Exam Note: Doubling n and V together keeps P.

Brain Storming Question 5. The density of a gas A is twice that of a gas B at the same temperature. The molecular mass of gas B is thrice that of A. The ratio of the pressures acting on A and B will be:
(a) 6 : 1 (b) 7 : 8 (c) 2 : 5 (d) 1 : 4

Solution.

Answer: (a) 6 : 1. Hint: Pm = dRT, so (PAmA)/(PBmB) = dA/dB; PA/PB = 2 × 3 = 6 : 1.

Teacher's Note: Use P = dRT/M, so P ∝ d × M for fixed T.

Exam Note: Multiply density ratio 2 and mass ratio 3.

Brain Storming Question 6. In the corrections made to the ideal gas equation for real gases, the reduction in pressure due to attractive forces is directly proportional to:
(a) n/V (b) nb (c) n2/(V2b) (d) n2/V2

Solution.

Answer: (d) n2/V2. Hint: pressure correction = an2/V2, so it is proportional to n2/V2.

Teacher's Note: Attraction depends on pairs of molecules, so on (n/V)2.

Exam Note: Quote the term an2/V2.

Brain Storming Question 7. Which of the following conditions is favourable for liquefaction of gas?
(a) T > Tc; P > Pc (b) T < Tc; P > Pc (c) T = Tc, P = Pc (d) T = Tc, P < Pc

Solution.

Answer: (b) T < Tc; P > Pc. Liquefaction needs T below the critical temperature and sufficiently high pressure.

Teacher's Note: Below Tc pressure can liquefy a gas.

Exam Note: Both conditions are needed.

Brain Storming Question 8. An ideal gas of certain mass is heated in a small vessel and then in a large vessel, such that their volume remains unchanged. The P–T curves are:
(a) parabolic with same curvature (b) parabolic with different curvatures (c) linear with same slope (d) linear with different slopes

Solution.

Answer: (d) linear with different slopes. At constant volume P = (nR/V)T is a straight line whose slope nR/V depends on V, so the two vessels give lines with different slopes.

Teacher's Note: Each isochore is a straight line through the origin.

Exam Note: Slope = nR/V differs with V.

Brain Storming Question 9. A spherical air bubble is rising from the depth of a lake when pressure is P atm and temperature is T K. The percentage increase in its radius when it comes to the surface of a lake will be: (Assume temperature and pressure at the surface are respectively 2T K and P/4.)
(a) 100% (b) 50% (c) 40% (d) 200%

Solution.

Answer: (a) 100%. Hint: PV1/T = (P/4)V2/(2T) gives V2 = 8V1; (4/3)πr23 = 8 × (4/3)πr13, so r2 = 2r1: radius increases by 100%.

Teacher's Note: Volume ratio 8 gives radius ratio 2 (cube root).

Exam Note: Increase = (2 − 1)/1 = 100%.

Brain Storming Question 10. It is easier to liquefy oxygen than hydrogen because:
(a) oxygen has a higher critical temperature and lower inversion temperature than hydrogen (b) oxygen has a lower critical temperature and higher inversion temperature than hydrogen (c) oxygen has a higher critical temperature and a higher inversion temperature than hydrogen (d) the critical temperature and inversion temperature of oxygen is very low

Solution.

Answer: (c) oxygen has a higher critical temperature and a higher inversion temperature than hydrogen. O2 has the larger a, hence higher Tc (154 K against 33 K) and higher Ti (about 764 K against 202 K).

Teacher's Note: Both Tc and Ti scale with a/b.

Exam Note: O2 has stronger attraction than H2.

Brain Storming Question 11. 2 mole 'He' is mixed with 2 gm of H2. The molar heat capacity at constant pressure for the mixture is:
(a) 17R/6 (b) 11R/6 (c) 4R (d) 3R/2

Solution.

Answer: (a) 17R/6. Hint: CP(He) = (5/2)R, CP(H2) = (7/2)R, nHe = 2, nH2 = 1: CP = (2 × 5R/2 + 1 × 7R/2)/3 = 17R/6.

Teacher's Note: Mole-weighted average of the two molar CP values.

Exam Note: 2 g H2 is 1 mole.

Brain Storming Question 12. The van der Waals' constant 'a' for the gases O2, N2, NH3 and CH4 are 1.36, 1.39, 4.17 and 2.253 respectively, the gas which can be most easily liquefied is:
(a) O2 (b) N2 (c) NH3 (d) CH4

Solution.

Answer: (c) NH3. Hint: a is directly proportional to intermolecular force, so the gas with the greater value of a (NH3) is most easily liquefied.

Teacher's Note: Larger a means stronger attraction.

Exam Note: Pick the gas with the largest a.

Brain Storming Question 13. At what temperature will the molar kinetic energy of 0.3 mole of 'He' be the same as that of 0.4 mole of argon at 400 K?
(a) 700 K (b) 500 K (c) 800 K (d) 400 K

Solution.

Answer: (d) 400 K. Molar kinetic energy (3/2)RT depends only on T, so T = 400 K.

Teacher's Note: KE per mole is (3/2)RT; mass and number of moles do not matter.

Exam Note: Equal molar KE means equal T.

Brain Storming Question 14. Let Ps and P be the saturated partial pressure and partial pressure of water respectively. Then the relative humidity is given by:
(a) ((Ps + P)/Ps) × 100 (b) (P/Ps) × 100 (c) (Ps/P) × 100 (d) (P + Ps) × 100

Solution.

Answer: (b) (P/Ps) × 100. Relative humidity = (actual partial pressure/saturated vapour pressure) × 100.

Teacher's Note: Relative humidity compares actual vapour pressure with saturation pressure.

Exam Note: Put P in the numerator.

Brain Storming Question 15. Molar volume of a monoatomic gas at P0 and T0 is 0.5 times its molar volume at 10P0 and at the same temperature. Ignoring the value of the van der Waals' constant 'a', the radius of the gas molecules is given by:
(a) 0.8RT0/P0 (b) (0.6RT0/(P0Nπ))1/3 (c) (3RT0/(20P0Nπ))1/3 (d) (3RT0/(20P0π))1/3

Solution.

Answer: (c) (3RT0/(20P0Nπ))1/3. Answer as printed in the book key. Check: with a = 0, P(V − b) = RT; the key corresponds to V(10P0) = 0.5V(P0) (the statement as printed has the two pressures reversed): RT0/(10P0) + b = 0.5(RT0/P0 + b) gives b = 0.8RT0/P0; b = 4N(4/3)πr3 then gives r = (3RT0/(20P0Nπ))1/3. Needs a human check of the printed statement.

Teacher's Note: Use P(V − b) = RT at both pressures and b = 4 × (molecular volume per mole).

Exam Note: Relate b to molecular radius with b = 16πN r3/3.

Brain Storming Question 16. A vessel is filled with a mixture of oxygen and nitrogen. At what ratio of partial pressures will the mass of gases be identical?
(a) P(O2) = 0.785P(N2) (b) P(O2) = 8.75P(N2) (c) P(O2) = 1.14P(N2) (d) P(O2) = 0.875P(N2)

Solution.

Answer: (d) P(O2) = 0.875P(N2). Hint: PO2V = (w/32)RT and PN2V = (w/28)RT, so PO2/PN2 = 28/32 = 0.875.

Teacher's Note: Equal mass gives mole ratio 28 : 32.

Exam Note: Partial pressure is proportional to moles.

Brain Storming Question 17. KCl crystallises in the same type of lattice as does NaCl. Given that rNa+/rCl− = 0.55 and rK+/rCl− = 0.74. Calculate the ratio of the side of the unit cell for KCl to that of NaCl. [PET (Kerala) 2008]
(a) 1.123 (b) 0.891 (c) 1.414 (d) 0.414 (e) 1.732

Solution.

Answer: (a) 1.123. Hint: adding 1 gives (rNa + rCl)/rCl = 1.55 and (rK + rCl)/rCl = 1.74. Dividing: edge ratio = 1.74/1.55 = 1.122.

Teacher's Note: Edge a = 2(r+ + r−) in the NaCl lattice; take the ratio.

Exam Note: Divide (1 + 0.74) by (1 + 0.55).

Brain Storming Question 18. 8 : 8 coordination of CsCl is found to change into 6 : 6 coordination:
(a) on increasing the pressure (b) on increasing the temperature (c) on decreasing the pressure (d) on decreasing the temperature

Solution.

Answer: (b) on increasing the temperature. CsCl changes to the NaCl-type (6:6) structure on heating (about 445°C); pressure has the opposite effect, favouring higher coordination.

Teacher's Note: Heating lowers coordination number; pressure raises it.

Exam Note: Name the temperature effect.

Brain Storming Question 19. An alloy of Cu, Ag and Au is found to have copper constituting ccp lattice. If silver atoms occupy the edge-centres and gold is present at body-centre, the alloy has the formula:
(a) Cu4Ag2Au (b) Cu4Ag4Au (c) Cu4Ag3Au (d) CuAgAu

Solution.

Answer: (c) Cu4Ag3Au. Hint: Cu = 8 × 1/8 + 6 × 1/2 = 4; Ag = 12 × 1/4 = 3; Au = 1; formula Cu4Ag3Au.

Teacher's Note: Count: corners 1/8, faces 1/2, edges 1/4, body centre 1.

Exam Note: Add the counts for each metal.

Brain Storming Question 20. The anions (A) form hexagonal closest packing and atoms (M) occupy only two-third of octahedral voids in it; then the general formula of the compound is:
(a) MA (b) A2 (c) M2A3 (d) M3A2

Solution.

Answer: (c) M2A3. N anions give N octahedral voids; M fills 2N/3, so M : A = 2/3 : 1 = 2 : 3, giving M2A3.

Teacher's Note: Octahedral voids equal the number of anions.

Exam Note: Ratio M : A = 2/3 : 1.

Brain Storming Question 21. In a face-centred cubic of A and B atoms in which A atoms are at the corners of the unit cell and B-atoms at the face-centres, one of the A-atoms is missing from one corner in the unit cell. The simplest formula of the compound is:
(a) A7B3 (b) AB3 (c) A7B24 (d) A8B21

Solution.

Answer: (c) A7B24. Hint: A = (1/8) × 7 = 7/8; B = 6 × 1/2 = 3; A : B = 7/8 : 3 = 7 : 24, so A7B24.

Teacher's Note: Seven corners each give 1/8.

Exam Note: Ratio 7/8 : 3 = 7 : 24.

Brain Storming Question 22. Select the incorrect statement(s):
(a) Schottky defect is not shown by CsCl (b) Frenkel defect is shown by ZnS (c) hcp and ccp structures have different coordination numbers (d) at high pressure, the coordination number increases

Solution.

Answer: (a) Schottky defect is not shown by CsCl; (c) hcp and ccp structures have different coordination numbers. (a) is incorrect because CsCl does show Schottky defect, and (c) is incorrect because hcp and ccp both have coordination number 12. (b) and (d) are correct.

Teacher's Note: CsCl has equal-size ions so shows Schottky defects.

Exam Note: hcp and ccp both have coordination number 12.

Brain Storming Question 23. Select the incorrect statement:
(a) In CsCl unit cell, rCs+ + rCl− = (√3/2)l (b) In NaCl unit cell, rNa+ + rCl− = l/2 (c) In CsCl unit cell, 68% space is void (d) In NaCl unit cell, 26% space is void

Solution.

Answer: (c) In CsCl unit cell, 68% space is void. In CsCl, the ions fill about 68% of the space, so about 32% is void; statement (c) swaps the two figures.

Teacher's Note: Packing fraction 68% means 32% void.

Exam Note: Distinguish occupied from void space.

Brain Storming Question 24. The ionic radii of Rb+ and I− are 1.46 and 2.16 Å respectively. The most probable type of structure exhibited by it is:
(a) CsCl (b) NaCl (c) ZnS (d) CaF2

Solution.

Answer: (b) NaCl. Radius ratio = 1.46/2.16 = 0.676, within 0.414–0.732, so coordination number 6: NaCl type.

Teacher's Note: Compute r+/r− and match it with the range.

Exam Note: 0.676 lies in the octahedral range.

Brain Storming Question 25. Perovskite is a mineral with the formula CaTiO3. Which of the positive ions in the crystal is more likely to be packed in the octahedral holes?
(a) Ti4+ (b) Ti2+ (c) Ca2+ (d) O2+

Solution.

Answer: (a) Ti4+. The small, highly charged Ti4+ sits in the octahedral hole, while the larger Ca2+ sits in the larger 12-coordinate site with oxide ions.

Teacher's Note: Smaller cation fits the octahedral hole.

Exam Note: Ti4+ is smaller than Ca2+.

Brain Storming Question 26. Which of the following is incorrect? [BHU (Screening) 2008]
(a) A real gas behaves like ideal gas over a wide range of pressure (∼ 100 atm) at Boyle point (b) A real gas behaves like ideal gas over a wide range of pressure (∼ 100 atm) at critical temperature of the gas (c) (∂U/∂V)T = 0 for an ideal gas (d) (∂U/∂V)T = a/V2 for a real gas obeying van der Waals' equation

Solution.

Answer: (b) A real gas behaves like ideal gas over a wide range of pressure (∼ 100 atm) at critical temperature of the gas. Corrected: the printed key gives (c), but (c) is correct for an ideal gas; the book's own hint says a real gas cannot behave like an ideal gas at the critical temperature, so the incorrect statement is (b). Hint (book): a real gas cannot behave like an ideal gas at the critical temperature. So statement (b) is the incorrect one; (c) and (d) are correct.

Teacher's Note: Only at the Boyle temperature is behaviour ideal over a wide pressure range.

Exam Note: The critical point is far from ideal.

Brain Storming Question 27. The number of atoms in 100 g of an fcc crystal with density d = 10 g/cm3 and cell edge as 200 pm is equal to:
(a) 3 × 1025 (b) 5 × 1024 (c) 1 × 1025 (d) 2 × 1025

Solution.

Answer: (b) 5 × 1024. Cell volume = (2 × 10−8)3 = 8 × 10−24 cm3; mass per cell = 8 × 10−23 g; cells in 100 g = 1.25 × 1024; atoms = 4 × 1.25 × 1024 = 5 × 1024.

Teacher's Note: Find mass of one cell, count cells, multiply by Z = 4.

Exam Note: Edge 200 pm = 2 × 10−8 cm.

Brain Storming Question 28. In a ccp structure, the:
(a) first and third layers are repeated (b) first and fourth layers are repeated (c) second and fourth layers are repeated (d) first, third and sixth layers are repeated

Solution.

Answer: (b) first and fourth layers are repeated. ccp follows ABCABC..., so the fourth layer repeats the first.

Teacher's Note: ABC repeat means every third layer matches.

Exam Note: Layer 4 = layer 1.

Brain Storming Question 29. Which of the following compounds represents an inverse 2 : 3 spinel structure?
(a) FeIII[FeIIFeIII]O4 (b) PbO2 (c) Al2O3 (d) Mn3O4

Solution.

Answer: (a) FeIII[FeIIFeIII]O4. Fe3O4 (magnetite) is the inverse spinel, with FeIII in tetrahedral sites and FeII plus FeIII in octahedral sites.

Teacher's Note: In an inverse spinel the divalent ion occupies octahedral sites.

Exam Note: Magnetite is the standard example.

Brain Storming Question 30. A solid solution of CdBr2 in AgBr contains:
(a) Schottky defects (b) Frenkel defects (c) Colour centres (d) Frenkel as well as Schottky defects

Solution.

Answer: (d) Frenkel as well as Schottky defects. AgBr itself shows both Frenkel and Schottky defects (the book key marks this answer).

Teacher's Note: Impurity Cd2+ adds cation vacancies to AgBr, which already has both defects.

Exam Note: Name both defects of AgBr.

Brain Storming Question 31. Which of the following correctly represents the relation between capillary rise 'h' and capillary radius 'r'? (four graphs (a) to (d) of h against r)
(a) graph (a): h falls with r along a curve bending away from the axes (b) graph (b): h falls with r along a hyperbola, steeply at first then flattening (c) graph (c): h rises to a maximum and then falls (d) graph (d): h rises with r and flattens

Solution.

Answer: (b) graph (b): h falls with r along a hyperbola, steeply at first then flattening. Hint: capillary rise decreases with increase in the radius of the tube, h = 2γcosθ/(rρg) ∝ 1/r, a hyperbola.

Teacher's Note: h is inversely proportional to r, giving a hyperbola.

Exam Note: Match the curve with h ∝ 1/r.

Brain Storming Question 32. There is a depression in the surface of the liquid in a capillary when:
(a) the cohesive force is smaller than the adhesive force (b) the cohesive force is greater than the adhesive force (c) the cohesive and adhesive forces are equal (d) none of the above is true

Solution.

Answer: (b) the cohesive force is greater than the adhesive force. Hint: depression takes place when the cohesive force of the liquid dominates the adhesive force with the capillary wall.

Teacher's Note: Mercury in glass: cohesion exceeds adhesion, giving a convex meniscus and depression.

Exam Note: Compare cohesive and adhesive forces.

Brain Storming Question 33. Surface tension does not vary with:
(a) temperature (b) vapour pressure (c) the size of surface (d) concentration

Solution.

Answer: (c) the size of surface. Surface tension is a force per unit length that is independent of the surface area.

Teacher's Note: It depends on temperature and composition, not on area.

Exam Note: Area does not change surface tension.

Brain Storming Question 34. Which among the following has the least surface tension?
(a) Benzene (b) Acetic acid (c) Diethyl ether (d) Chlorobenzene

Solution.

Answer: (c) Diethyl ether. Diethyl ether has very weak intermolecular forces and so the lowest surface tension.

Teacher's Note: Weaker intermolecular forces give lower surface tension.

Exam Note: Ether has no hydrogen bonding.

Brain Storming Question 35. The SI unit of the coefficient of viscosity is:
(a) N s−1 m−1 (b) N s m−2 (c) N s−2 m−2 (d) N s−1 m−2

Solution.

Answer: (b) N s m−2. η = F/(A · du/dz) has unit N m−2 / (s−1) = N s m−2 (Pa s).

Teacher's Note: From F = ηA(dv/dx), units are N s m−2.

Exam Note: 1 poise = 0.1 N s m−2.

Brain Storming Question 36. Compressibility factor for a gas under critical condition is:
(a) 3/8 (b) 8/3 (c) 1 (d) 1/4

Solution.

Answer: (a) 3/8. Hint: PcVc = (3/8)RTc, so Z = PcVc/RTc = 3/8.

Teacher's Note: Zc = PcVc/RTc = 3/8 for van der Waals gas.

Exam Note: Quote 0.375.

Brain Storming Question 37. Critical temperature of H2O is greater than that of O2 because H2O molecules have:
(a) greater dipole moment (b) V-shape (c) lesser number of electrons (d) it has only sigma bonds

Solution.

Answer: (a) greater dipole moment. Greater polarity and hydrogen bonding in water cause stronger attraction and a higher critical temperature.

Teacher's Note: Stronger intermolecular forces raise Tc.

Exam Note: Water is polar with hydrogen bonding.

Brain Storming Question 38. For van der Waals' constants 'a' and 'b', the unit of the ratio a/b will be:
(a) atm litre−1 (b) litre-atm mol−1 (c) litre-mol−2 (d) litre mol−1

Solution.

Answer: (b) litre-atm mol−1. Hint: unit of a = atm L2 mol−2, unit of b = L mol−1; a/b = atm L mol−1.

Teacher's Note: Divide the units of a and b.

Exam Note: a/b has units of energy per mole.

Brain Storming Question 39. Select the correct order of the following temperatures: Boyle temp. (A), Critical temp. (B), Inversion temp. (C)
(a) A > C > B (b) B > A > C (c) A > B > C (d) C > A > B

Solution.

Answer: (d) C > A > B. Hint: TB = a/Rb, Ti = 2a/Rb, Tc = 8a/27Rb, so Ti > TB > Tc.

Teacher's Note: Compare the multiples of a/Rb: 2, 1, 0.30.

Exam Note: Ti = 2TB and Tc = 0.3TB.

Brain Storming Question 40. The gas equation for a real gas is P(V − b) = RT. Here, the parameter 'b' is van der Waals' constant. The graph of pressure against temperature (isochore) will give straight line of slope:
(a) zero (b) R/(V − b) (c) R/P (d) negative

Solution.

Answer: (b) R/(V − b). P = RT/(V − b), so at constant V the slope of P against T is R/(V − b).

Teacher's Note: At constant V the equation is linear in T.

Exam Note: Slope is the coefficient of T.

Brain Storming Question 41. A crystalline solid is made up of X, Y and Z elements. Atoms of X form fcc packing; atoms of Y occupy octahedral voids while atoms of Z occupy tetrahedral voids. What will be the simplest formula of solid if atoms along one body diagonal are removed:
(a) X5Y4Z8 (b) XYZ (c) X8Y4Z5 (d) X2YZ

Solution.

Answer: (a) X5Y4Z8. Hint: X = 4, Y = 4, Z = 8 in the full cell. Along one body diagonal two X corner atoms (1/8 each), one Y (body centre) and two Z are removed: X = 4 − 2/8 = 15/4, Y = 3, Z = 6, so X : Y : Z = 15/4 : 3 : 6 = 5 : 4 : 8.

Teacher's Note: Count atoms removed along the diagonal: 2 corners, 1 body-centre, 2 tetrahedral voids.

Exam Note: Simplify 15/4 : 3 : 6 to 5 : 4 : 8.

Brain Storming Question 42. Which of the following pattern has void fraction of 0.26?
(a) AAAA... (b) ABABAB... (c) ABCABCABC... (d) ABCCBAABC...

Solution.

Answer: (c) ABCABCABC.... ABCABC... is ccp with packing fraction 0.74, hence void fraction 0.26. (ABAB... hcp also has 0.26, but the book key gives (c).)

Teacher's Note: Close packing (74%) leaves 26% void.

Exam Note: AAAA... is simple cubic with 48% void.

Brain Storming Question 43. Two gas bulbs are connected by a thin tube. Calculate the partial pressure of helium after the connective valve is opened at a constant temperature of 27°C: (bulb 1: He, 0.63 atm, 1.2 litre; bulb 2: Ne, 2.8 atm, 3.4 L)
(a) 1 atm (b) 0.328 atm (c) 1.64 atm (d) 0.166 atm

Solution.

Answer: (d) 0.166 atm. Hint: nHe = 0.63 × 1.2/(0.0821 × 300) = 0.03; nNe = 2.8 × 3.4/(0.0821 × 300) = 0.39; xHe = 0.0714. Direct check: pHe = 0.63 × 1.2/(1.2 + 3.4) = 0.164 atm, which is closest to option (d) 0.166 atm (the book's own working has the total pressure as 2.33 atm; it is 2.23 atm).

Teacher's Note: Each gas expands into the combined volume 4.6 L; use Boyle's law for helium.

Exam Note: Partial pressure = P1V1/(V1 + V2).

Brain Storming Question 44. Ammonia gas at 76 cm Hg pressure was connected to a manometer. After sparking in the flask, ammonia is partially dissociated as follows: 2NH3(g) ⇌ N2(g) + 3H2(g); the level in the mercury column of the manometer was found to show the difference of 18 cm. What is the partial pressure of H2(g) at equilibrium?
(a) 18 cm Hg (b) 9 cm Hg (c) 27 cm Hg (d) 24 cm Hg

Solution.

Answer: (c) 27 cm Hg. Hint: initial 76, equilibrium 76 − 2x, x, 3x; total = 76 + 2x. Increase in pressure = 2x = 18, so x = 9 cm and p(H2) = 3x = 27 cm Hg.

Teacher's Note: Net moles increase by 2 per 2NH3 dissociated; pressure rise equals 2x.

Exam Note: Partial pressure of H2 is 3x.

Brain Storming Question 45. Two balloons A and B are taken at 300 K. Maximum capacity of balloon A and balloon B are 800 mL and 1800 mL respectively. When the balloon system is heated (A is inside B, current volumes 700 mL for A and 1600 mL for B); which one will be burst first?
(a) Inner balloon (A) (b) Outer balloon (B) (c) Both balloons simultaneously (d) Cannot be predicted

Solution.

Answer: (b) Outer balloon (B). Hint: A: 700/300 = 800/T gives T = 342.85 K; B: 1600/300 = 1800/T gives T = 337.5 K. Balloon B reaches its maximum volume at the lower temperature, so the outer balloon bursts first.

Teacher's Note: Charles' law for each balloon: find T at which it reaches capacity.

Exam Note: The lower T is reached first.

Brain Storming Question 46. A gas jar of 10 litre volume filled with O2 at 300 K is connected to glycerine manometer (open arm) showing a level difference of 5 m of glycerine. What will be the number of moles of O2 in the gas jar? (dglycerine = 2.72 g/mL; dmercury = 13.6 g/mL)
(a) 0.64 mol (b) 0.4 mol (c) 0.94 mol (d) 0.36 mol

Solution.

Answer: (c) 0.94 mol. Hint: (h × d × g)Hg = (h × d × g)glycerine: hHg = 5 × 2.72/13.6 = 1 m; Pgas = 760 + 1000 = 1760 mm Hg. n = PV/RT = (1760/760) × 10/(0.0821 × 300) = 0.94 mol.

Teacher's Note: Convert glycerine column to mercury, add to atmospheric pressure.

Exam Note: Then n = PV/RT.

Brain Storming Problems: One or More Than One Correct Options

Brain Storming Multi-correct Question 1. Which of the following graphs represent Boyle's law? (graphs (a) P against V, a rising straight line; (b) PV against P, a horizontal line; (c) PV against V, a horizontal line; (d) PV against P, a falling straight line)
(a) P against V (rising line) (b) PV against P (horizontal) (c) PV against V (horizontal) (d) PV against P (falling line)

Solution.

Answer: (b) PV against P (horizontal); (c) PV against V (horizontal). At constant T, PV is constant, so PV against P or V is horizontal. P against V is a hyperbola, not a rising line.

Teacher's Note: Boyle's law means PV = constant; plot PV against any variable gives a flat line.

Exam Note: Horizontal PV graph is the signature.

Brain Storming Multi-correct Question 2. Which of the following equation(s) is/are correct on the basis of ideal gas equation? (N = number of molecules, NA = Avogadro's number, kB = Boltzmann constant)
(a) PV = (N/NA)RT (b) PV = NkBT (c) PV = (d/m)RT (d) PV = dRT

Solution.

Answer: (a) PV = (N/NA)RT; (b) PV = NkBT. n = N/NA gives (a), and R/NA = kB gives (b). (c) and (d) are not dimensionally correct forms of PV.

Teacher's Note: Replace n by N/NA and R by NAkB.

Exam Note: PV needs the total amount, not just density.

Brain Storming Multi-correct Question 3. A gas can be easily liquefied:
(a) when its inversion temperature equals the Boyle's temperature (b) under reversible adiabatic expansion (c) under pressure when it is cooled below the critical temperature (d) at low pressure and above critical temperature

Solution.

Answer: (b) under reversible adiabatic expansion; (c) under pressure when it is cooled below the critical temperature. Hint: (i) reversible adiabatic expansion lowers the temperature, hence facilitates liquefaction; (ii) a gas can be liquefied below the critical temperature by increasing the pressure.

Teacher's Note: Cooling below Tc then compressing liquefies a gas.

Exam Note: Adiabatic expansion supplies cooling.

Brain Storming Multi-correct Question 4. Which of the following quantities are same for all ideal gases at the same temperature?
(a) The kinetic energy of 1 mole (b) The kinetic energy of 1 g (c) The number of molecules in 1 mole (d) The number of molecules in 1 g

Solution.

Answer: (a) The kinetic energy of 1 mole; (c) The number of molecules in 1 mole. Hint: (i) 1 mole of a gas always contains 6.023 × 1023 molecules; (ii) kinetic energy of ideal gases depends only on temperature (per mole).

Teacher's Note: Molar KE (3/2)RT and molecules per mole NA are gas independent.

Exam Note: Per gram quantities depend on molar mass.

Brain Storming Multi-correct Question 5. Which of the following statements are correct?
(a) Helium diffuses at a rate 8.65 times as much as CO does (b) Helium diffuses at a rate 2.65 times as fast as CO does (c) Helium diffuses at a rate of 4 times faster than CO2 (d) Helium diffuses at a rate 4 times as fast as SO2 does

Solution.

Answer: (b) Helium diffuses at a rate 2.65 times as fast as CO does; (d) Helium diffuses at a rate 4 times as fast as SO2 does. Corrected: the printed key gives (a) and (d), but (a) claims 8.65 times whereas √(28/4) = 2.65, which is option (b); so the correct answers are (b) and (d). r(He)/r(CO) = √(28/4) = 2.65; r(He)/r(CO2) = √(44/4) = 3.32; r(He)/r(SO2) = √(64/4) = 4. So (b) and (d) are correct.

Teacher's Note: Apply Graham's law √(Mgas/MHe) for each gas.

Exam Note: Square roots: √7, √11, √16.

Brain Storming Multi-correct Question 6. The viscosity of a liquid depends on:
(a) the volume of the liquid (b) the temperature of the liquid (c) the surface area of the liquid (d) the structure of the molecule

Solution.

Answer: (b) the temperature of the liquid; (d) the structure of the molecule. Viscosity falls with temperature and depends on molecular structure and intermolecular forces, not on amount or surface area.

Teacher's Note: Viscosity is an intensive property set by temperature and molecules.

Exam Note: Not on volume or surface area.

Brain Storming Multi-correct Question 7. Viscosity is the property of:
(a) liquids (b) gases (c) solids (d) all of these

Solution.

Answer: (a) liquids; (b) gases. Both liquids and gases (fluids) show viscosity.

Teacher's Note: Fluids flow, so they have viscosity.

Exam Note: Solids do not flow.

Brain Storming Multi-correct Question 8. Which of the following crystals have 6 : 6 coordination?
(a) NH4I (b) MgO (c) MnO (d) ZnS

Solution.

Answer: (a) NH4I; (b) MgO; (c) MnO. Corrected: the printed key gives (a) and (b) only, but MnO also has the rock-salt (NaCl-type) structure with 6:6 coordination, so the answer is (a), (b) and (c). Needs a human check. NH4I (at room temperature), MgO and MnO all adopt the rock-salt (6:6) structure; ZnS is 4:4.

Teacher's Note: Rock-salt type compounds have 6:6 coordination.

Exam Note: ZnS is 4:4.

Brain Storming Multi-correct Question 9. Which of the following compounds represent a normal 2 : 3 spinel structure?
(a) MgIIAlIII2O4 (b) CoII(CoIII)2O4 (c) Zn(TiZn)O4 (d) Ni(CO)4

Solution.

Answer: (a) MgIIAlIII2O4; (b) CoII(CoIII)2O4. MgAl2O4 and Co3O4 are normal 2:3 spinels (divalent ion in tetrahedral sites); Ni(CO)4 is a carbonyl complex.

Teacher's Note: In normal spinel M2+ occupies tetrahedral and M3+ octahedral sites.

Exam Note: Reject the carbonyl.

Brain Storming Multi-correct Question 10. Which type of crystals contain only one Bravais lattice?
(a) Hexagonal (b) Triclinic (c) Rhombohedral (d) Monoclinic

Solution.

Answer: (a) Hexagonal; (b) Triclinic; (c) Rhombohedral. Hexagonal, triclinic and rhombohedral each have only a primitive lattice; monoclinic has two (P and C).

Teacher's Note: Systems with a single Bravais lattice: triclinic, rhombohedral, hexagonal.

Exam Note: Monoclinic has two.

Brain Storming Multi-correct Question 11. At which temperature, is a ferrimagnetic solid converted to a ferromagnetic solid?
(a) 850 K (b) 300 K (c) 400 K (d) 600 K

Solution.

Answer: (a) 850 K. Answer as printed in the book key: 850 K (the Curie temperature of magnetite, Fe3O4). Strictly, ferrimagnetic solids become paramagnetic above their Curie temperature.

Teacher's Note: Ferrimagnetism is lost above the Curie temperature.

Exam Note: Quote 850 K for Fe3O4.

Brain Storming Multi-correct Question 12. In NaCl structure, all the:
(a) octahedral sites are occupied (b) tetrahedral sites are unoccupied (c) octahedral as well as tetrahedral sites are unoccupied (d) octahedral as well as tetrahedral sites are occupied

Solution.

Answer: (a) octahedral sites are occupied; (b) tetrahedral sites are unoccupied. Na+ fills all octahedral voids of the fcc Cl− lattice and the tetrahedral voids are empty.

Teacher's Note: NaCl: ccp anions, cations in all octahedral voids.

Exam Note: Tetrahedral voids are vacant.

Brain Storming Multi-correct Question 13. The density of a certain solid AB (formula mass = 119) is 2.75 g/cm3. The edge of the unit cell is 654 pm long. What is/are true about the solid AB?
(a) It has bcc unit cell (b) There are four constituents per unit cell (c) Unit cell constituted by anion is fcc (d) Structure is similar to ZnS

Solution.

Answer: (b) There are four constituents per unit cell; (c) Unit cell constituted by anion is fcc. Hint: Z = a3dN/M = (654 × 10−10)3 × 2.75 × 6.023 × 1023/119 ≈ 4, so there are four formula units per cell and an fcc arrangement.

Teacher's Note: Compute Z from density; Z = 4 means fcc.

Exam Note: Edge 654 pm = 6.54 × 10−8 cm.

Brain Storming Multi-correct Question 14. The unit cell of a crystalline solid is bounded by f (faces), e (edges) and c (interfacial angle). Which of the following relations is correct?
(a) f + e = c + 2 (b) f + c = e + 2 (c) c + e = f + 2 (d) none of these

Solution.

Answer: (b) f + c = e + 2. Euler's relation for a polyhedron: faces + corners = edges + 2 (here the book's c counts corners). For a cube 6 + 8 = 12 + 2.

Teacher's Note: Check the cube: 6 faces, 12 edges, 8 corners.

Exam Note: Euler: F + V = E + 2.

Brain Storming Multi-correct Question 15. Which of the following diagrams correctly describes the behaviour of a fixed mass of an ideal gas? (T is measured in K) [PMT (Kerala) 2007; CMS Vellore (Med.) 2008; CET (Punjab) 2008] (diagrams: (a) P against V at constant T, falling line; (b) P against T at constant V, falling line; (c) PV against P at constant T, rising line; (d) PV against V at constant T, rising line; (e) V against T at constant P, rising line)
(a) P against V at constant T: falling straight line (b) P against T at constant V: falling straight line (c) PV against P at constant T: rising line (d) PV against V at constant T: rising line (e) V against T at constant P: rising line through the origin

Solution.

Answer: (e) V against T at constant P: rising line through the origin. Only V against T at constant P (V ∝ T) is a straight rising line through the origin; P against V is a hyperbola, P ∝ T at constant V rises, and PV is constant at constant T.

Teacher's Note: Check each plot with PV = nRT.

Exam Note: Constant PV gives horizontal lines.

Brain Storming Multi-correct Question 16. Molar mass of Ne atom is ten times of H2 molecule. Which of the following statement is/are true?
(a) Both these gases have same kinetic energy at 27°C (b) H2 molecule will travel 10 times faster than Ne atom at same temperature (c) Pressure of 1 mol Ne and 1 mol H2 molecules will be same (d) Ten mole of H2 and 1 mole of Ne will have same volume at a temperature of 27°C

Solution.

Answer: (a) Both these gases have same kinetic energy at 27°C; (c) Pressure of 1 mol Ne and 1 mol H2 molecules will be same. Corrected: the printed key gives (a), (b), (c), but at the same temperature H2 is √10 = 3.16 times faster than Ne (not 10 times), so (b) is false; the answer is (a) and (c) (taking (c) at equal volume and temperature). Needs a human check. Equal T gives equal molar KE (a); H2 is √10 = 3.16 times (not 10 times) faster than Ne, so (b) is false; equal moles in equal volume and T exert equal pressure (c); (d) needs equal pressure and is not generally true.

Teacher's Note: KE depends only on T; speed ratio is √(M ratio).

Exam Note: Check conditions stated in each option.

Brain Storming Multi-correct Question 17. Select the correct conditions indicated below the following plots: (a) isochores: P against T lines for V1 > V2 > V3; (b) isobars: lines for P1 < P2 < P3; (c) isotherms: P against V curves for T1 < T2 < T3; (d) isotherms: PV against P horizontal lines for T1 < T2 < T3
(a) isochores with V1 > V2 > V3 (b) isobars with P1 < P2 < P3 (c) isotherms with T1 < T2 < T3 (P against V) (d) isotherms with T1 < T2 < T3 (PV against P)

Solution.

Answer: (a) isochores with V1 > V2 > V3; (c) isotherms with T1 < T2 < T3 (P against V); (d) isotherms with T1 < T2 < T3 (PV against P). On a P–T isochore the slope nR/V is smaller for larger V; hyperbolas lie farther from the axes at higher T; and PV = nRT is higher for higher T.

Teacher's Note: Slope of isochore = nR/V; isotherm position moves outward with T.

Exam Note: Check ordering of V, T in each graph.

Self Assessment: Assignment No. 4

Self Assessment Question 1. Boyle's temperature of four gases are given below: A (TB = 120 K), B (25 K), C (500 K), D (410 K). Which gas can be liquefied most easily?
(a) A (b) B (c) C (d) D

Solution.

Answer: (c) C. TB = a/Rb and Tc = (8/27)TB, so the highest TB (500 K, gas C) means the highest critical temperature and easiest liquefaction.

Teacher's Note: Higher a/b means stronger attraction and higher Tc.

Exam Note: Link TB to Tc by the factor 8/27.

Self Assessment Question 2. A gas is enclosed in a vessel of volume V at temperature T1 and pressure P; the vessel is connected to another vessel of volume V/2 by a tube and a stop cock. The second vessel is initially evacuated. If the stop cock is opened, the temperature of second vessel becomes T2. The first vessel is maintained at a temperature T1. What is the final pressure P1 in the apparatus?
(a) 2PT2/(2T2 + T1) (b) 2PT2/(T2 + 2T1) (c) PT2/(2T2 + T1) (d) 2PT2/(T1 + T2)

Solution.

Answer: (a) 2PT2/(2T2 + T1). Moles conserved: PV/T1 = P1V/T1 + P1(V/2)/T2, giving P1 = 2PT2/(2T2 + T1).

Teacher's Note: Total moles stay fixed; write n for each vessel separately.

Exam Note: Both vessels end at the same pressure.

Self Assessment Question 3. The ratio of rate of diffusion of gases A and B is 1 : 4. If the ratio of their masses present in the mixture is 2 : 3, what is the ratio of their mole fraction?
(a) 1/8 (b) 1/12 (c) 1/16 (d) 1/24

Solution.

Answer: (d) 1/24. Corrected: the printed key gives (b) 1/12, but MA/MB = 16 and a mass ratio 2 : 3 give nA/nB = (2/3)(1/16) = 1/24, option (d). Rate ∝ 1/√M gives MA/MB = 16. Mole ratio nA/nB = (2/16)/(3/1) = 1/24.

Teacher's Note: Graham's law gives M ratio 16 : 1; divide each mass by M.

Exam Note: Mole ratio, not mass ratio.

Self Assessment Question 4. Density of a gas at STP is 2 g/L while the expected density is 1.8 g/L assuming its ideal behaviour. Then:
(a) gas behaves ideally (b) forces of attraction are dominant among gas molecules (c) forces of repulsion are dominant among gas molecules (d) none of the above

Solution.

Answer: (b) forces of attraction are dominant among gas molecules. Actual density is higher, so actual volume is smaller and Z < 1, which means attraction dominates.

Teacher's Note: Higher density than ideal means the gas is more compressed (Z < 1).

Exam Note: Z < 1 indicates attraction dominates.

Self Assessment Question 5. In a crystalline solid, anions B are arranged in ccp lattice and cations A occupy 50% of the octahedral voids and 50% of the tetrahedral voids. What is the formula of the solid?
(a) AB (b) A3B2 (c) A2B3 (d) A2B

Solution.

Answer: (b) A3B2. Per 4 B: octahedral voids 4 and tetrahedral voids 8; A = 0.5 × 4 + 0.5 × 8 = 6; A : B = 6 : 4 = 3 : 2.

Teacher's Note: Count voids per cell: 4 octahedral and 8 tetrahedral.

Exam Note: Reduce 6 : 4 to 3 : 2.

Self Assessment Question 6. In a compound XY2O4, oxide ions are arranged in ccp and cations X are present in octahedral voids. Cations Y are equally distributed among octahedral and tetrahedral voids. The fraction of the octahedral voids occupied is:
(a) 1/4 (b) 1/2 (c) 1/6 (d) 1/8

Solution.

Answer: (b) 1/2. Per 4 O2−: X = 1 (octahedral), Y = 2, split as 1 octahedral and 1 tetrahedral. Octahedral voids filled = 1 + 1 = 2 of 4, i.e. 1/2.

Teacher's Note: Per cell there are 4 O2− and 4 octahedral voids.

Exam Note: Add X and half of Y in octahedral voids.

Self Assessment Question 7. An ideal gas:
(a) can be liquefied if its temperature is more than critical temperature (b) can be liquefied if its pressure is more than critical pressure (c) cannot be liquefied at any pressure and temperature (d) can be liquefied if its temperature is more than Boyle's temperature

Solution.

Answer: (c) cannot be liquefied at any pressure and temperature. An ideal gas has no intermolecular attraction, so it cannot be liquefied.

Teacher's Note: No attraction, no liquid.

Exam Note: State "no intermolecular forces".

Self Assessment Question 8. A mineral is made of calcium, titanium and oxygen. Ca2+ ions located at corners, Ti4+ ions at the body-centre and O2− ions at face-centres of the unit cell. The molecular formula of the mineral is:
(a) CaTi3O4 (b) CaTiO3 (c) CaTiO2 (d) CaTi2O3

Solution.

Answer: (b) CaTiO3. Ca = 8 × 1/8 = 1, Ti = 1, O = 6 × 1/2 = 3: CaTiO3.

Teacher's Note: Count per-cell atoms for each ion.

Exam Note: Charges balance: 2 + 4 = 3 × 2.

Self Assessment Question 9. If the graph is plotted for 1 mol gas in such a way that PV was plotted against P then intercept of the graph for real gases will be:
(a) RT − Pb + a (b) RT (c) RT − Pb + a (d) RT + Pb + ab + a

Solution.

Answer: (b) RT. For a real gas PV = RT + (b − a/RT)P approximately, so PV against P has intercept RT at P = 0.

Teacher's Note: At P → 0 every gas behaves ideally, so PV → RT.

Exam Note: Intercept is RT for all gases.

Self Assessment Question 10. The ratio of Boyle's temperature and critical temperature for a gas is:
(a) 8/27 (b) 27/8 (c) 1/2 (d) 2/1

Solution.

Answer: (b) 27/8. TB = a/Rb and Tc = 8a/27Rb, so TB/Tc = 27/8.

Teacher's Note: Divide the two formulas in a/Rb.

Exam Note: Ratio is greater than 1.

Self Assessment Question 11. With which of the following elements silicon should be doped so as to give p-type semiconductor? [CBSE (PMT) 2008]
(a) Selenium (b) Boron (c) Germanium (d) Arsenic

Solution.

Answer: (b) Boron. Boron (group 13) has three valence electrons, creating holes, so Si doped with B is p-type.

Teacher's Note: p-type needs a group 13 dopant (electron-deficient).

Exam Note: Arsenic and selenium give n-type.

Self Assessment Question 12. Total volume of atoms present in a face centred cubic unit cell of a metal is (r is atomic radius): [JIPMER 2008]
(a) (16/3)πr3 (b) (20/3)πr3 (c) (24/3)πr3 (d) (12/3)πr3

Solution.

Answer: (a) (16/3)πr3. 4 atoms × (4/3)πr3 = (16/3)πr3.

Teacher's Note: fcc has 4 atoms per cell.

Exam Note: Multiply the sphere volume by 4.

Self Assessment Question 13. How many effective Na+ and Cl− ions are present respectively in the rocksalt (NaCl)? If ions along the axis joining opposite faces are removed?
(a) 4, 7/2 (b) 7/2, 7/2 (c) 7/2, 4 (d) 3, 3

Solution.

Answer: (d) 3, 3. The axis through opposite face centres passes through 2 face-centre Cl− (1 effective) and the body-centre Na+ (1), so Na+ = 4 − 1 = 3 and Cl− = 4 − 1 = 3.

Teacher's Note: Removed ions along the axis: two face-centre Cl− (1/2 each) and one body-centre Na+.

Exam Note: Subtract from 4 and 4.

Self Assessment Question 14. Kinetic energy and pressure of a gas of unit mole are related as:
(a) P = 2E (b) P = (2/3)E (c) P = (3/2)E (d) P = E/2

Solution.

Answer: (b) P = (2/3)E. PV = (2/3)E, so for unit volume P = (2/3)E (E is the kinetic energy per unit volume).

Teacher's Note: Kinetic theory gives PV = (2/3) × total KE.

Exam Note: Per unit volume, P = (2/3)E.

Self Assessment: Section-II (Multiple Answers)

Self Assessment Question 15. Which of the following measure the deviation from ideal behaviour of gas?
(a) Collision diameter (b) Collision frequency (c) Compressibility factor (d) van der Waals' constant 'a'

Solution.

Answer: (c) Compressibility factor; (d) van der Waals' constant 'a'. Z measures deviation directly and the van der Waals constants a (and b) quantify the non-ideality. Collision diameter and frequency are kinetic properties.

Teacher's Note: Z = 1 for ideal gas; a, b = 0 for ideal gas.

Exam Note: Collision quantities do not measure deviation.

Self Assessment Question 16. In face-centred cubic unit cell: (a = edge length, r = radius of constituent units)
(a) face diagonal of the cube is a√2 or 4r (b) effective number of atoms in the unit cell is 4 (c) 8 tetrahedral voids per unit cell (d) rank of the unit cell is 3

Solution.

Answer: (a) face diagonal of the cube is a√2 or 4r; (b) effective number of atoms in the unit cell is 4; (c) 8 tetrahedral voids per unit cell. Face diagonal = a√2 = 4r; atoms = 8/8 + 6/2 = 4; tetrahedral voids = 2 × 4 = 8. The rank (effective atoms) is 4, not 3.

Teacher's Note: Count atoms 4, tetrahedral voids 8, octahedral voids 4.

Exam Note: Rank equals Z = 4.

Self Assessment Question 17. Which of the following mixtures of gases at room temperature follow Dalton's law of partial pressures?
(a) NO and O2 (b) CO and CO2 (c) NH3 and HCl (d) SO2 and O2

Solution.

Answer: (b) CO and CO2; (d) SO2 and O2. Corrected: the printed key gives (a), (b), (d), but NO and O2 react spontaneously at room temperature (2NO + O2 → 2NO2), so (a) does not follow Dalton's law; the answer is (b) and (d). Dalton's law applies to non-reacting gases: CO + CO2 and SO2 + O2 (no catalyst) do not react at room temperature. NO reacts with O2 to give NO2 and NH3 reacts with HCl to give NH4Cl.

Teacher's Note: Dalton's law fails when gases react.

Exam Note: NO + O2 reacts readily at room temperature.

Self Assessment Question 18. A real gas can be liquefied:
(a) under adiabatic expansion (b) above critical temperature (c) when cooled below critical temperature under applied pressure (d) at temperature lower than critical temperature and pressure higher than critical pressure

Solution.

Answer: (a) under adiabatic expansion; (c) when cooled below critical temperature under applied pressure; (d) at temperature lower than critical temperature and pressure higher than critical pressure. Adiabatic expansion cools the gas, and below Tc pressure liquefies it; above Tc no liquefaction is possible.

Teacher's Note: Liquefaction needs T below Tc with enough pressure.

Exam Note: Adiabatic expansion provides cooling.

Self Assessment Question 19. Which of the following statements is (are) correct?
(a) In body-centred cubic unit cell, the coordination number is 12 (b) The coordination number of each type of ion in CsCl is 8 (c) A unit cell of an ionic crystal shares some of its ions with neighbouring unit cell (d) If rNa+ = 95 pm, rCl− = 181 pm, then edge length of unit cell of NaCl is 552 pm

Solution.

Answer: (b) The coordination number of each type of ion in CsCl is 8; (c) A unit cell of an ionic crystal shares some of its ions with neighbouring unit cell; (d) If rNa+ = 95 pm, rCl− = 181 pm, then edge length of unit cell of NaCl is 552 pm. bcc has coordination number 8, not 12. CsCl is 8:8; corner, face and edge ions are shared; a = 2(95 + 181) = 552 pm.

Teacher's Note: Edge of NaCl cell = 2(r+ + r−).

Exam Note: bcc CN = 8, fcc CN = 12.

Self Assessment: Section-III (Assertion-Reason Type)

Self Assessment Question 20. Statement-1: The pressure inside the LPG cylinder remains constant even when it is in use at room temperature.
Statement-2: Vapour pressure of any liquid is independent of its amount; it depends only on temperature.
(a) Statement-1 is true; Statement-2 is true; Statement-2 is a correct explanation for Statement-1 (b) Statement-1 is true; Statement-2 is true; Statement-2 is not a correct explanation for Statement-1 (c) Statement-1 is true; Statement-2 is false (d) Statement-1 is false; Statement-2 is true

Solution.

Answer: (c) Statement-1 is true; Statement-2 is false. Answer as printed in the book key. The pressure in an LPG cylinder is the vapour pressure of the liquid and does not depend on the amount of liquid left. (Statement-2 as worded is incomplete because vapour pressure also depends on the nature of the liquid, which is presumably why the book marks it false; this is a judgement call.)

Teacher's Note: Pressure in a cylinder with liquid present is the vapour pressure at that T.

Exam Note: Vapour pressure depends on the liquid and T, not on amount.

Self Assessment Question 21. Statement-1: If a gas has compressibility factor (Z) greater than unity, then repulsive forces are dominant.
Statement-2: Value of Z decreases with increase in pressure.
(a) Statement-1 is true; Statement-2 is true; Statement-2 is a correct explanation for Statement-1 (b) Statement-1 is true; Statement-2 is true; Statement-2 is not a correct explanation for Statement-1 (c) Statement-1 is true; Statement-2 is false (d) Statement-1 is false; Statement-2 is true

Solution.

Answer: (c) Statement-1 is true; Statement-2 is false. Z > 1 means repulsion dominates (true); Z does not simply decrease with pressure (it increases at high pressure), so Statement-2 is false.

Teacher's Note: Z first falls then rises with pressure.

Exam Note: Z > 1 shows repulsion.

Self Assessment Question 22. Statement-1: The value of Boyle's temperature for a real gas is TB = a/Rb.
Statement-2: At Boyle's temperature, TB, real gases behave ideally over a long range of pressure.
(a) Statement-1 is true; Statement-2 is true; Statement-2 is a correct explanation for Statement-1 (b) Statement-1 is true; Statement-2 is true; Statement-2 is not a correct explanation for Statement-1 (c) Statement-1 is true; Statement-2 is false (d) Statement-1 is false; Statement-2 is true

Solution.

Answer: (b) Statement-1 is true; Statement-2 is true; Statement-2 is not a correct explanation for Statement-1. Both are true, but the behaviour described does not explain the expression a/Rb.

Teacher's Note: TB follows from Z = 1 at low pressure: b = a/RT.

Exam Note: The formula is not explained by ideality.

Self Assessment Question 23. Statement-1: CaCO3 shows polymorphism.
Statement-2: CaCO3 exists in two forms called aragonite and calcite.
(a) Statement-1 is true; Statement-2 is true; Statement-2 is a correct explanation for Statement-1 (b) Statement-1 is true; Statement-2 is true; Statement-2 is not a correct explanation for Statement-1 (c) Statement-1 is true; Statement-2 is false (d) Statement-1 is false; Statement-2 is true

Solution.

Answer: (a) Statement-1 is true; Statement-2 is true; Statement-2 is a correct explanation for Statement-1. Polymorphism means one substance in more than one crystalline form; CaCO3 exists as aragonite and calcite.

Teacher's Note: Polymorphs are different crystal forms of the same compound.

Exam Note: Name aragonite and calcite.

Self Assessment Question 24. Statement-1: Lead zirconate is piezoelectric solid.
Statement-2: Lead zirconate crystals have no dipole moment.
(a) Statement-1 is true; Statement-2 is true; Statement-2 is a correct explanation for Statement-1 (b) Statement-1 is true; Statement-2 is true; Statement-2 is not a correct explanation for Statement-1 (c) Statement-1 is true; Statement-2 is false (d) Statement-1 is false; Statement-2 is true

Solution.

Answer: (c) Statement-1 is true; Statement-2 is false. Lead zirconate is piezoelectric because its crystals have a net dipole arrangement; Statement-2 is therefore false.

Teacher's Note: Piezoelectricity needs a polar (dipolar) crystal.

Exam Note: Reason contradicts the property.

Self Assessment Question 25. Statement-1: Band gap in germanium is small.
Statement-2: The energy spread of each germanium atomic energy level is infinitesimally small. (IIT 2007)
(a) Statement-1 is true; Statement-2 is true; Statement-2 is a correct explanation for Statement-1 (b) Statement-1 is true; Statement-2 is true; Statement-2 is not a correct explanation for Statement-1 (c) Statement-1 is true; Statement-2 is false (d) Statement-1 is false; Statement-2 is true

Solution.

Answer: (c) Statement-1 is true; Statement-2 is false. The band gap of Ge is small (0.7 eV), but atomic levels broaden into bands with appreciable spread, so Statement-2 is false.

Teacher's Note: Energy bands arise by broadening of atomic levels.

Exam Note: Small gap does not come from infinitesimal spread.

Self Assessment: Section-IV (Matrix-Matching)

Self Assessment Question 26. Match the Column-I with Column-II.

Column-IColumn-II
(a) High temperature(p) Z ≠ 1
(b) Extremely low pressure(q) Pb < a/V
(c) Very high pressure(r) Z = 1
(d) Low pressure(s) Pb > a/V

Solution.

(a)→(p), (s); (b)→(r); (c)→(p), (s); (d)→(p), (q). Corrected: the book key prints (a)→(p); (b)→(p); (c)→(p), (s); (d)→(p), (q). Using Z ≈ 1 + (Pb − a/V)/RT: Pb > a/V when T > TB (high T, or very high P), Pb < a/V at low T and low P, and Z → 1 as P → 0, so (b) is (r) and (a) also takes (s). Needs a human check.

Teacher's Note: Compare Pb with a/V: Pb > a/V above the Boyle temperature, Pb < a/V below it.

Exam Note: At P → 0, Z = 1 for every gas.

Self Assessment Question 27. Match the Column-I with Column-II.

Column-IColumn-II
(a) Constituent units occupy only corners(p) 67.98%
(b) Constituent units occupy corners as well as face-centres(q) 26.17%
(c) Constituent units occupy corners and body-centre(r) 74.01%
(d) Constituent units occupy corners and edge-centres(s) 52.33%

Solution.

(a)→(s); (b)→(r); (c)→(p); (d)→(q). Check: simple cubic 52.4%, fcc 74.05%, bcc 68.0%, corners + edge-centres: 4 atoms of r = a/4 give π/12 = 26.2%.

Teacher's Note: Packing fractions: sc 52%, bcc 68%, fcc 74%.

Exam Note: Edge-centre case: touching along edge, r = a/4.

Self Assessment Question 28. Match the Column-I with Column-II. (IIT 2007)

Column-IColumn-II
(a) Simple cubic and face-centred cubic(p) Have these cell parameters a = b = c and α = β = γ
(b) Cubic and rhombohedral(q) Are two crystal systems
(c) Cubic and tetragonal(r) Have only two crystallographic angles of 90°
(d) Hexagonal and monoclinic(s) Belong to same crystal system

Solution.

(a)→(p), (s); (b)→(p), (q); (c)→(q); (d)→(q), (r).

Teacher's Note: Simple and face-centred cubic are one system; cubic and rhombohedral share a = b = c but differ.

Exam Note: Hexagonal and monoclinic each have two 90° angles.

Integer Answer Type Questions

Integer Question 1. A substance AxBy crystallises in a face centred cubic lattice. Atoms 'A' occupy each corner of unit cell and atoms of 'B' occupy centre of each face of the cube. Total number of atoms of A and B in one unit cell will be ............

Solution.

Answer: 4. A = 8 × 1/8 = 1 and B = 6 × 1/2 = 3, so the formula is AB3 with 1 + 3 = 4 atoms per cell.

Teacher's Note: Corner atoms count 1/8, face-centre atoms 1/2.

Exam Note: Add A and B counts to get total atoms.

Integer Question 2. In KBr crystal structure, the number of second nearest neighbour of K+ ions are ..................

Solution.

Answer: 12. KBr has the NaCl-type structure; the second nearest neighbours of K+ are 12 K+ ions at distance a/√2.

Teacher's Note: In rock-salt, first neighbours are 6 unlike ions, second are 12 like ions.

Exam Note: Second neighbours are the same kind of ion.

Integer Question 3. Density of lithium atom is 0.53 g/cm3. The edge length of Li is 3.5 Å. The number of lithium atoms in a unit cell will be .......... (Atomic mass of lithium is 6.94)

Solution.

Answer: 2. Z = ρa3NA/M = 0.53 × (3.5 × 10−8)3 × 6.022 × 1023/6.94 = 1.97 ≈ 2 (bcc).

Teacher's Note: Compute Z from density; Z = 2 means bcc.

Exam Note: Round Z to the nearest whole number.

Integer Question 4. A cubic solid is made up of two elements P and Q. Atoms of Q are present at the corners of the cube and atoms of P at the body centre. The coordination number of P and Q will be ................

Solution.

Answer: 8. Each atom of the cell has eight neighbours of the other kind (CsCl type), so the coordination number is 8.

Teacher's Note: Body-centre atom touches 8 corner atoms and vice versa.

Exam Note: CsCl-type structure has 8:8 coordination.

Integer Question 5. If there are 3 moles of atoms present in the packing of pattern ABC ABC ...... The number of moles of tetrahedral voids is equal to ..............

Solution.

Answer: 6. Close packing has 2 tetrahedral voids per atom, so 3 mol of atoms give 6 mol of tetrahedral voids.

Teacher's Note: Tetrahedral voids = 2 × number of atoms.

Exam Note: Octahedral voids would be 3.

Integer Question 6. The number of atoms in HCP unit cell is ............

Solution.

Answer: 6. The hexagonal close-packed unit cell contains 12 corners × 1/6 + 2 face centres × 1/2 + 3 inside = 6 atoms.

Teacher's Note: Hexagonal cell: corners 1/6, faces 1/2, body 3.

Exam Note: Do not use the 2-atom primitive cell.

Integer Question 7. How many effective Na+ ions are present respectively in rock salt NaCl? If ions along one axis joining opposite faces are removed?

Solution.

Answer: 3. NaCl cell has 4 Na+; removing the body-centre Na+ on the axis through opposite face centres leaves 4 − 1 = 3.

Teacher's Note: The axis passes through two face-centre Cl− and the body-centre Na+.

Exam Note: Only the body-centre Na+ lies on the axis.

Integer Question 8. How many moles of SO2 will occupy a volume of 10 litre at a pressure of 15 atm and temperature 624 K? (a = 6.71 atm L2 mol−2; b = 0.0564 litre mol−1)

Solution.

Answer: 3. Check with van der Waals equation: n = 3 gives (15 + 6.71 × 9/100)(10 − 3 × 0.0564) = 15.604 × 9.831 = 153.4 and nRT = 3 × 0.0821 × 624 = 153.7, which agree.

Teacher's Note: Substitute trial n in (P + an2/V2)(V − nb) = nRT.

Exam Note: The ideal value 15 × 10/(0.0821 × 624) = 2.9 is near.

Integer Question 9. 3.2 g of oxygen and 0.2 g of hydrogen are placed in 1.12 litre flask at 0°C. The total pressure of the gas mixture will be .........

Solution.

Answer: 4 (atm). n(O2) = 3.2/32 = 0.1 and n(H2) = 0.2/2 = 0.1; P = 0.2 × 22.4/1.12 = 4 atm.

Teacher's Note: Add moles of both gases and apply P = nRT/V.

Exam Note: Use molecular masses 32 and 2.

Integer Question 10. A mixture of non reacting gases exert a pressure of 5 atm. One of the gases occupy 40% volume of the mixture, what would be its partial pressure in atm?

Solution.

Answer: 2. Partial pressure = volume fraction × total pressure = 0.40 × 5 = 2 atm.

Teacher's Note: Volume fraction equals mole fraction for ideal gases.

Exam Note: Partial pressure = mole fraction × Ptotal.

Integer Question 11. A gas is found to have the formula (C3O2)n. Its vapour density is 34. The value of n will be ............

Solution.

Answer: 1. M = 2 × 34 = 68 and the formula mass of C3O2 is 36 + 32 = 68, so n = 1.

Teacher's Note: Molar mass = 2 × vapour density, then divide by empirical mass.

Exam Note: Empirical mass of C3O2 is 68.

Integer Question 12. The weight of hydrogen gas obtained from 42 g of CaH2 by treatment with water is ................ gm.

Solution.

Answer: 4. CaH2 + 2H2O → Ca(OH)2 + 2H2: 42 g = 1 mol gives 2 mol H2 = 4 g.

Teacher's Note: Write the balanced equation: 1 mol CaH2 gives 2 mol H2.

Exam Note: Molar mass of CaH2 is 42.

Integer Question 13. The stop cock containing two bulbs of volume 5 litre and 10 litre containing an ideal gas at 9 atm and 6.0 atm respectively is opened. What is the final pressure in atm if the temperature remains the same?

Solution.

Answer: 7. P = (9 × 5 + 6 × 10)/15 = 105/15 = 7 atm. (The pressure of the second bulb is read as 6.0 atm; the scan shows it as 60 atm, which does not give the printed answer 7.)

Teacher's Note: Each gas expands into the total volume 15 L; add the PV values.

Exam Note: Divide the sum of PV by total volume.

Integer Question 14. At 400 K, the root mean square (rms) speed of a gas X (molecular mass = 40) is equal to the most probable speed of gas Y at 60 K. The molecular mass of the gas Y is ........ (IIT 2009)

Solution.

Answer: 4. Hint: √(3R × 400/40) = √(2R × 60/m), so 30 = 120/m and m = 4.

Teacher's Note: Equate √(3RT/M) of X with √(2RT/m) of Y.

Exam Note: Square both sides and cancel R.

Linked Comprehension Type Questions (items with a printed hint)

Passage 1, Question 4. At Boyle's temperature, compressibility factor Z for a real gas is: (a) Z = 1 (b) Z = 0 (c) Z > 1 (d) Z < 1

Solution.

Answer: (a) Z = 1. Hint (book): at Boyle's temperature, the real gas behaves like an ideal gas. Only the hint is printed; the option letter is derived from it.

Teacher's Note: At TB the gas obeys PV ≈ nRT over a wide pressure range.

Exam Note: Z = PV/nRT = 1 at Boyle temperature.

Passage 3, Question 8. Critical volumes of four gases A, B, C and D are 0.025 L, 0.312 L, 0.245 L and 0.432 L respectively. The gas with larger diameter will be: (a) A (b) D (c) B (d) C

Solution.

Answer: (b) D. Hint (book): Vc = 3b = 3 × 4N × (4/3)πr3, so a larger critical volume means a larger molecular radius; D has the largest Vc (0.432 L). Only the hint is printed; the option letter is derived from it.

Teacher's Note: Vc = 3b and b = 4 × molecular volume per mole, so Vc ∝ r3.

Exam Note: Largest Vc gives largest molecule.

OP Tandon Solutions for JEE Mathematics: OP Tandon Solutions Physical Chemistry IIT JEE Chapter 4 States Of Matter Part 3

Chapter-wise OP Tandon Solutions: OP Tandon Solutions Physical Chemistry IIT JEE Chapter 4 States Of Matter Part 3

Access the complete chapter-wise PDF for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 4 States Of Matter Part 3. These structured OP Tandon Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Explore More Study Resources for JEE Math

In addition to these OP Tandon Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.