OP Tandon Solutions Physical Chemistry IIT JEE Chapter 4 States Of Matter Part 2

OP Tandon Solutions for JEE Chemistry: Chapter 04 States Of Matter

Access comprehensive textbook solutions for Chapter 04 States Of Matter using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Practice JEE Chemistry Solutions: Chapter 04 States Of Matter

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

States of Matter - Solid State: Bragg Equation, Cubic Systems, Voids and Solved Examples (pages 35-68)

X-ray Diffraction and Bragg's Equation

Example 63. X-rays of wavelength 1.54 Å strike a crystal and are observed to be deflected at an angle of 22.5°. Assuming that n = 1, calculate the spacing between the planes of atoms that are responsible for this reflection.

Solution.

Applying Bragg's equation, nλ = 2d sin θ.

Given n = 1, λ = 1.54 Å, θ = 22.5°.

d = nλ/(2 sin θ) = 1.54/(2 × 0.383) = 2.01 Å

Teacher's Note: Bragg's equation nλ = 2d sin θ; substitute and solve for d.

Exam Note: Write the formula, substitution and Å unit.

Example 64. The first order reflection of a beam of X-rays of wavelength 1.54 Å from the (100) face of a crystal of the simple cubic type occurs at an angle of 11.29°. Calculate the length of the unit cell.

Solution.

Applying Bragg's equation, 2d sin θ = nλ.

Given θ = 11.29°, n = 1, λ = 1.54 Å = 1.54 × 10-8 cm.

d = 1.54 × 10-8/(2 × sin 11.29°) = 1.54 × 10-8/(2 × 0.1957) = 3.93 × 10-8 cm

dhkl = a/√(h² + k² + l²) = a for the (100) face.

a = 3.93 × 10-8 cm = length of the unit cell.

Teacher's Note: For the (100) planes of a cubic lattice, d equals the edge a.

Exam Note: Use d100 = a; do not forget the factor 2.

Example 65. When an electron in an excited state of Mo atom falls from L to K-shell, an X-ray is emitted. These X-rays are diffracted at angle of 7.75° by planes with a separation of 2.64 Å. What is the difference in energy between K-shell and L-shell in Mo, assuming a first order diffraction (sin 7.75° = 0.1349)?

Solution.

According to Bragg's equation: nλ = 2d sin θ

1 × λ = 2 × 2.64 sin 7.75° = 2 × 2.64 × 0.1349

λ = 0.712 Å

Energy difference between K and L-shell of Mo = hc/λ = (6.626 × 10-34 × 3 × 108)/(0.712 × 10-10) = 2.791 × 10-15 J

Teacher's Note: First get λ from Bragg, then ΔE = hc/λ; convert Å to metres.

Exam Note: Unit conversion of Å to m is where marks are lost.

Some Solved Examples

Example 66. A compound formed by elements A and B crystallises in the cubic structure where A atoms are at the corners of a cube and B atoms are at the face-centre. What is the formula of the compound?

Solution.

An atom at the corner of the cube contributes 1/8 to the unit cell. Hence, number of atoms of A in the unit cell = 8 × 1/8 = 1.

An atom at the face of the cube contributes 1/2 to the unit cell. Hence, number of atoms of B in the unit cell = 6 × 1/2 = 3.

Thus, the formula is AB3.

Teacher's Note: Corner atom is shared by 8 cells, face atom by 2.

Exam Note: Count contributions per atom, then write the simplest ratio.

Example 67. At room temperature, sodium crystallises in body-centred cubic lattice with a = 4.24 Å. Calculate the theoretical density of sodium (At. mass of Na = 23.0).

Solution.

A body-centred cubic unit cell contains 8 atoms at the 8 corners and 1 in the centre. Hence, total number of atoms in a unit cell = 8 × 1/8 + 1 = 2.

Volume of unit cell = a³ = (4.24 × 10-8)³ cm³

Density = ZM/(N0 × V) = (2 × 23)/((6.023 × 1023)(4.24 × 10-8)³) = 1.002 g cm-3

Teacher's Note: bcc has Z = 2; use ρ = ZM/(N0a³).

Exam Note: Convert Å to cm before cubing.

Example 68. The density of KCl is 1.9893 g cm-3 and the length of a unit cell is 6.29082 Å as determined by X-ray diffraction. Calculate the value of Avogadro's number.

Solution.

KCl has face-centred cubic structure, i.e., Z = 4.

Avogadro's number = ZM/(d × V)

Given d = 1.9893; M = 74.5; V = (6.29082 × 10-8)³ cm³

Avogadro's number = (4 × 74.5)/(1.9893 × (6.29082 × 10-8)³) = 6.017 × 1023

Teacher's Note: Rearrange the density formula to get N0 = ZM/(dV).

Exam Note: Fcc has Z = 4; state it explicitly.

Example 69. Silver crystallises in a face-centred cubic unit cell. The density of Ag is 10.5 g cm-3. Calculate the edge length of the unit cell.

Solution.

For face-centred cubic unit, Z = 4.

V = ZM/(N0 × d) = (4 × 108)/((6.023 × 1023) × 10.5) = 6.83 × 10-23 = 68.3 × 10-24 cm³

Let a be the edge length of the unit cell. V = a³, so a³ = 68.3 × 10-24

a = (68.3 × 10-24)1/3 cm = 4.09 × 10-8 cm = 409 pm

Teacher's Note: First find the cell volume from density, then take the cube root.

Exam Note: Cube root step carries the marks; give answer in pm too.

Example 70. An element occurs in bcc structure with a cell edge of 288 pm. The density of metal is 7.2 g cm-3. How many atoms does 208 g of the element contain?

Solution.

Volume of the unit cell = (288 × 10-10)³ = 23.9 × 10-24 cm³

Volume of 208 g of the element = 208/7.2 = 28.88 cm³

Number of unit cells in 28.88 cm³ = 28.88/(23.9 × 10-24) = 12.08 × 1023 unit cells

Each bcc structure contains 2 atoms.

So, total atoms in 12.08 × 1023 unit cells = 2 × 12.08 × 1023 = 24.16 × 1023

Teacher's Note: Volume of sample divided by cell volume gives number of cells; multiply by Z.

Exam Note: Remember 288 pm = 288 × 10-10 cm.

Example 71. Lithium forms body-centred cubic crystals. Calculate the atomic radius of lithium if the length of the side of a unit cell of lithium is 351 pm.

Solution.

In body-centred cubic crystals, r = (√3/4) a = (√3/4) × 351 pm = 151.98 pm

Teacher's Note: In bcc, atoms touch along the body diagonal: √3 a = 4r.

Exam Note: Quote r = √3a/4 and the answer in pm.

Example 72. Ammonium chloride crystallises in a body-centred cubic lattice with a unit distance of 387 pm. Calculate (a) the distance between oppositely charged ions in the lattice and (b) the radius of the NH4+ ion if the radius of Cl- ion is 181 pm.

Solution.

(a) In a body-centred cubic lattice, oppositely charged ions touch each other along the cross-diagonal of the cube. So, 2rc + 2ra = √3 a, or rc + ra = (√3/2) a = (√3/2) × 387 = 335.15 pm.

(b) Given that ra = 181 pm, rc = 335.15 − 181.0 = 154.15 pm.

Teacher's Note: In CsCl-type cells cation and anion touch along the body diagonal.

Exam Note: Use r+ + r- = √3a/2 for the CsCl type.

Example 73. The unit cell cube length for LiCl (NaCl structure) is 5.14 Å. Assuming anion-anion contact, calculate the ionic radius for chloride ion.

Solution.

In a face-centred cubic lattice, anions touch each other along the face diagonal of the cube. 4rCl- = √2 a

rCl- = (√2/4) a = (√2/4) × 5.14 = 1.82 Å

Alternative: Distance between Li+ and Cl- ion = 5.14/2 = 2.57 Å. Thus, distance between two chloride ions = √((2.57)² + (2.57)²) = 3.63 Å. Hence, radius of Cl- = 3.63/2 = 1.82 Å.

Teacher's Note: In fcc the anions touch along the face diagonal, so face diagonal = 4r.

Exam Note: Anion-anion contact means 4r = √2 a; state it.

Example 74. The density of crystalline sodium chloride is 2.165 g cm-3. What is the edge length of the unit cell. What would be the dimensions of cube containing one mole of NaCl?

Solution.

ρ = (N/a³)(M/NA), where ρ = 2.165 g cm-3, M = 58.5, NA = 6.023 × 1023, N = number of formula units per unit cell = 4 (for fcc).

a³ = (N/ρ)(M/NA) = (4/2.165)(58.5/(6.023 × 1023)) = 1.794 × 10-22 cm³

a = 5.64 × 10-8 cm

Molar volume = molar mass/density = 58.5/2.165 = 27.02 cm³

Edge length of the cube containing one mole = (27.02)1/3 = 3 cm

Corrected: the book prints the molar mass as 58.8 in this last step; the molar mass of NaCl is 58.5 (used above). The answer 3 cm is unchanged.

Teacher's Note: NaCl is fcc with 4 formula units; one mole occupies M/ρ.

Exam Note: Cube root of molar volume gives the 3 cm edge.

Example 75. The density of potassium bromide crystal is 2.75 g cm-3 and the length of an edge of a unit cell is 654 pm. The unit cell of KBr is one of three types of cubic unit cells. How many formula units of KBr are there in a unit cell? Does the unit cell have a NaCl or CsCl structure?

Solution.

ρ = (N/a³)(M/NA), so N = (ρ × a³ × NA)/M

N = (2.75 × (654 × 10-10)³ × 6.023 × 1023)/119 = 3.89 ≈ 4

Number of mass points per unit cell = 4. It is NaCl type crystal, i.e., fcc structure.

Teacher's Note: Z comes out near 4, which means fcc (NaCl type), not bcc (CsCl).

Exam Note: Round Z to the nearest integer and name the structure.

Example 76. A unit cell of sodium chloride has four formula units. The edge length of unit cell is 0.564 nm. What is the density of sodium chloride? (IIT May 1997)

Solution.

ρ = ZM/(a³N) = (4 × 58.5)/((5.64 × 10-8)³ × 6.023 × 1023) = 2.16 g cm-3 (≈ 2.165)

Teacher's Note: Direct use of ρ = ZM/(a³NA) with a = 0.564 nm = 5.64 × 10-8 cm.

Exam Note: Convert nm to cm before cubing.

Example 77. Chromium metal crystallises with a body-centred cubic lattice. The length of the unit cell edge is found to be 287 pm. Calculate the atomic radius. What would be the density of chromium in g/cm³? (IIT July 1997)

Solution.

In body-centred cubic unit cell, a√3 = 4r, where a = edge length, r = radius of atom.

Corrected: the book substitutes a = 4.29 Å, which does not match the 287 pm given in the question (and gives 1.8574 Å). With a = 287 pm: r = a√3/4 = (√3 × 287)/4 = 124.3 pm.

Density (the book does not work it out): Z = 2, M = 52 g mol-1, a = 2.87 × 10-8 cm.

ρ = ZM/(a³NA) = (2 × 52)/((2.87 × 10-8)³ × 6.023 × 1023) = 7.30 g cm-3

Teacher's Note: bcc: radius from √3a = 4r; density from Z = 2.

Exam Note: Both parts are asked; do not stop after the radius.

Example 78. When heated above 916°C, iron changes its crystal structure from body-centred cubic to cubic closed packed structure. Assuming that the metallic radius of the atom does not change, calculate the ratio of density of the bcc crystal to that of the ccp crystal.

Solution.

In body-centred packing, the efficiency of packing is 67.92%. In the cubic closed packing, the packing efficiency is 74.02%.

For the same atomic radius, the density is proportional to the packing efficiency.

Density of bcc crystal/density of ccp crystal = 67.92/74.02 = 0.918

Teacher's Note: Same atoms, same radius: density ratio equals packing-fraction ratio.

Exam Note: Quote 68% (bcc) and 74% (ccp) efficiencies.

Illustrations of Objective Questions

Question Question 30. An element 'A' has face-centred cubic structure with edge length equal to 361 pm. The apparent radius of atom 'A' is: (a) 127.6 pm (b) 180.5 pm (c) 160.5 pm (d) 64 pm

Solution.

Answer: (a) 127.6 pm.

For face-centred cubic unit cell, a√2 = 4r, so r = (361 × 1.414)/4 = 127.6 pm.

Teacher's Note: In fcc atoms touch along the face diagonal: √2a = 4r.

Exam Note: Use a√2 = 4r for fcc.

Question Question 31. The packing fraction of the element that crystallizes in simple cubic arrangement is: (a) π/4 (b) π/6 (c) π/3 (d) π/2

Solution.

Answer: (b) π/6.

In simple unit cell a = 2r and Z = 1. Packing fraction = occupied volume/total volume = (4/3)πr³/a³ = (4/3)πr³/(2r)³ = π/6.

Teacher's Note: Simple cubic: one atom, a = 2r, so fraction = π/6 ≈ 0.52.

Exam Note: Memorise 52%, 68%, 74% for sc, bcc, fcc.

Question Question 32. How many unit cells are present in 39 g of potassium that crystallizes in body-centred cubic structure? (a) NA (b) NA/4 (c) 0.5 NA (d) 0.75 NA

Solution.

Answer: (c) 0.5 NA.

Number of atoms = (mass/atomic mass) × NA = (39/39) × NA = NA.

In bcc unit cell, Z = 2, so number of unit cells = NA/2 = 0.5 NA.

Teacher's Note: 39 g of K is one mole of atoms; divide by 2 atoms per bcc cell.

Exam Note: Atoms divided by Z gives unit cells.

Question Question 33. Sodium metal exists in bcc unit cell. The distance between nearest sodium atoms is 0.368 nm. The edge length of the unit cell is: (a) 0.368 nm (b) 0.184 nm (c) 0.575 nm (d) 0.424 nm

Solution.

Answer: (d) 0.424 nm.

In bcc unit cell, a√3 = 4r, and nearest-neighbour distance = 2r = 0.368 nm.

a = 4r/√3 = (2/√3) × 2r = (2/√3) × 0.368 = 0.425 nm, i.e. option (d) 0.424 nm.

Teacher's Note: Nearest distance is 2r; bcc gives a = 4r/√3.

Exam Note: Nearest-neighbour distance in bcc is √3a/2.

Question Question 34. If the distance between Na+ and Cl- ions in NaCl crystal is 265 pm, then edge length of the unit cell will be? (a) 265 pm (b) 530 pm (c) 795 pm (d) 132.5 pm

Solution.

Answer: (b) 530 pm.

In NaCl: edge length = 2 × distance between Na+ and Cl- ions = 2 × 265 = 530 pm.

Teacher's Note: Along the NaCl cell edge there is one cation-anion pair, so a = 2(r+ + r-).

Exam Note: Edge = 2(r+ + r-) for rock salt.

Question Question 35. The interionic distance for caesium chloride crystal will be: (a) a (b) a/2 (c) a√3/2 (d) 2a/√3

Solution.

Answer: (c) a√3/2.

In CsCl (bcc-type arrangement) the ions touch along the body diagonal of length √3a, so the interionic distance = √3a/2.

Teacher's Note: Cs+ is at the cube centre, Cl- at corners: half the body diagonal.

Exam Note: CsCl: r+ + r- = √3a/2.

Voids in Close Packed Lattices

Question Question 36. In a compound, atoms of element Y form ccp lattice and those of element X occupy 2/3rd tetrahedral voids. The formula of the compound will be: (a) X3Y4 (b) X4Y3 (c) X2Y3 (d) X2Y (AIEEE 2008)

Solution.

Answer: (b) X4Y3.

Let number of atoms of Y used in packing = n. Number of tetrahedral voids = 2n.

Number of atoms of X = (2/3) × 2n = (4/3) n.

Y : X = n : (4/3)n = 3 : 4. Formula of compound = X4Y3.

Teacher's Note: ccp has 2 tetrahedral voids per atom; fill two-thirds of them.

Exam Note: Tetrahedral voids = 2 × atoms in packing.

Question Question 37. A solid compound contains X, Y and Z atoms in a cubic lattice with X atoms occupying the corners, Y atoms in the body centred positions and Z atoms at the centre of the faces of the unit cell. What is the empirical formula of the compound? (a) XY2Z3 (b) XYZ3 (c) X2Y2Z3 (d) X8YZ6 (e) XYZ

Solution.

Answer: (b) XYZ3.

Number of atoms of X in a unit cell = 1/8 × 8 = 1.

Number of atoms of Y in a unit cell = 1.

Number of atoms of Z in a unit cell = 1/2 × 6 = 3.

Empirical formula of the compound = XYZ3.

Teacher's Note: Corners count 1/8, face centres 1/2, body centre 1.

Exam Note: Show the counts 1 : 1 : 3 before the formula.

Question Question 38. In a crystalline solid, atoms of X form fcc packing and atoms of Y occupy all octahedral voids. If all the atoms along one body diagonal are removed then the simplest formula of the crystalline solid will be: (a) XY (b) X4Y3 (c) X5Y4 (d) X4Y5

Solution.

Answer: (c) X5Y4.

Number of atoms of X in fcc packing (at corners and face centres of cubic unit cell) = 8 × 1/8 + 6 × 1/2 = 4.

Number of atoms of Y at octahedral voids = 4.

Along one body diagonal there are two X atoms (corners) and one Y atom (body centre).

Number of effective atoms of X after removal = 4 − 2 × 1/8 = 15/4.

Number of effective atoms of Y after removal = 4 − 1 = 3.

X : Y = 15/4 : 3 = 5 : 4. Simplest formula = X5Y4.

Teacher's Note: Remove two corner atoms (1/8 each) and the body-centre void atom.

Exam Note: Subtract fractional contributions, not whole atoms.

Miscellaneous Numerical Examples

Example 1. There is a collection of crystalline substances in a hexagonal closed packing. If the density of matter is 2.6 g/cm³, what would be the average density of matter in collection? What fraction of space is actually unoccupied?

Solution.

In hexagonal closed packing, the packing efficiency is 74.05%.

Density of matter = packing fraction × total density = (74.05/100) × 2.6 = 1.93 g cm-3

% empty space = 100 − 74.05 = 25.95%

Teacher's Note: Average density = packing fraction × solid density; empty space is the remainder.

Exam Note: hcp and ccp both pack 74%; empty space 26%.

Example 2. The unit cell length of NaCl is observed to be 0.5627 nm by X-ray diffraction studies; the measured density of NaCl is 2.164 g cm-3. Correlate the difference of observed and calculated density and calculate % of missing Na+ and Cl- ions.

Solution.

Z = (a³ × d × N)/M, where Z = number of constituent units per unit cell = 4 in fcc, a = 0.5627 × 10-7 cm, d = density, N = Avogadro's number, M = molar mass.

(0.5627 × 10-7)³ × d × 6.023 × 1023/58.5 = 4, so d = 2.1805 g/cm³ (calculated).

Observed density = 2.164 g/cm³, which is less than the calculated density because some places are missing.

Actual constituent units per unit cell: Z = ((0.5627 × 10-7)³ × 2.164 × 6.023 × 1023)/58.5 = 3.969.

Missing units = 4 − 3.969 = 0.031.

% missing = (0.031/4) × 100 = 0.775% (about 0.76-0.78% depending on rounding of Z).

Teacher's Note: Lower observed density means vacancies (Schottky defect); compare actual Z with 4.

Exam Note: Link density deficit to missing ion pairs.

Example 3. In a cubic lattice, the closed packed structure of mixed oxides of the lattice is made up of oxide ions; one eighth of the tetrahedral voids are occupied by divalent ions (A2+) while one half of the octahedral voids are occupied by trivalent ions (B3+). What is the formula of the oxides?

Solution.

Let there be 80 O2- in the crystal. Octahedral voids = 80, tetrahedral voids = 160.

A2+ ions = 1/8 × 160 = 20; B3+ ions = 1/2 × 80 = 40.

A2+ : B3+ : O2- = 20 : 40 : 80 = 1 : 2 : 4.

Formula is AB2O4.

Teacher's Note: Voids: octahedral = N, tetrahedral = 2N for N oxide ions; then fill fractions.

Exam Note: Spinel AB2O4; check charge: 2 + 6 = 8.

Example 4. At 1425°C, Fe crystallises in a body-centred cubic lattice whose edge length is 2.93 Å. Assuming the atoms to be packed spheres, calculate: (a) the radius of the spheres, (b) the distance between centres of neighbouring spheres, (c) the number of atoms of Fe per unit lattice and (d) the total volume occupied by an atom of Fe.

Solution.

(a) a√3 = 4r, where a = edge length. r = a√3/4 = (2.93 × √3)/4 = 1.268 Å.

(b) Distance between the centres of neighbouring spheres = 2r = 2 × 1.268 = 2.537 Å.

(c) Number of atoms per unit cell = 8 × 1/8 + 1 = 2.

(d) Volume occupied by an atom of iron = (4/3)πr³ = (4/3)π(1.268 Å)³ = 8.54 Å3 = 8.54 × 10-24 cm³ (the book leaves this as the formula; value computed here).

Teacher's Note: bcc: √3a = 4r gives r; nearest distance is 2r; Z = 2.

Exam Note: Give four labelled parts with units.

Example 5. In face-centred cubic (fcc) crystal lattice, edge length of the unit cell is 400 pm. Find the diameter of the greatest sphere which can be fitted into the interstitial void without distortion of lattice. (IIT 2005)

Solution.

In fcc unit cell, a√2 = 4r, so r = (a√2)/4 = (400 × √2)/4 = 141.4 pm.

For octahedral void: 2(r + R) = a, so 2R = a − 2r = 400 − 2 × 141.4 = 117.16 pm.

Diameter of greatest sphere = 117.16 pm (≈ 117.2 pm).

Teacher's Note: Largest void in fcc is octahedral; along the edge 2r + 2R = a.

Exam Note: Radius of octahedral void R = 0.414r.

Example 6. The distance between planes of atoms parallel to the face of the unit cell of sodium chloride is 282 pm. The smallest angle of reflection observed in the X-ray diffraction pattern is 5.97°. Calculate the wavelength of the incident radiation.

Solution.

Using Bragg's equation, nλ = 2d sin θ.

1 × λ = 2 × 282 × 10-12 × sin 5.97°

λ = 58.6 × 10-12 m = 58.6 pm

Teacher's Note: Smallest angle corresponds to first order n = 1.

Exam Note: Smallest angle means n = 1; state this.

Example 7. CsCl has cubic structure of ions in which Cs+ ion is present in the body-centre of the cube. If density is 3.99 g cm-3: (a) Calculate the length of the edge of a unit cell. (b) What is the distance between Cs+ and Cl- ions? (c) What is the radius of Cs+ ion if the radius of Cl- ion is 180 pm?

Solution.

(a) Z = (a³ × ρ × N)/M. Z = 1 (1 Cs+ + 1 Cl- = 1 CsCl), M = 168.5.

1 = (a³ × 3.99 × 6.023 × 1023)/168.5, so a = 4.123 × 10-8 cm = 412 pm.

(b) Distance between Cs+ and Cl- = a√3/2 = (412 × √3)/2 = 356.8 pm.

(c) rCs+ + rCl- = 356.8, so rCs+ = 356.8 − 180 = 176.8 pm.

Teacher's Note: CsCl has one formula unit per cell; contact is along the body diagonal.

Exam Note: Cation-anion distance = half the body diagonal.

Example 8. If NaCl is doped with 10-3 mol per cent of SrCl2, what is the concentration of cation vacancy?

Solution.

Each Sr2+ ion replaces two Na+ ions, one site being occupied by Sr2+ and the other remaining vacant, so one cationic vacancy is created per Sr2+ ion.

Number of cationic vacancies per mol = (10-3 × 6.023 × 1023)/100 = 6.023 × 1018 vacancies per mol.

Teacher's Note: One Sr2+ replaces two Na+, leaving one vacancy per dopant ion.

Exam Note: Vacancies equal dopant ions; 10-3 mol% means 10-5 mol per mol.

Example 9. A metal crystallises into two cubic phases, face-centred cubic (fcc) and body-centred cubic (bcc), whose unit cell lengths are 3.5 and 3.0 Å respectively. Calculate the ratio of densities of fcc and bcc. (IIT 1999)

Solution.

Density of fcc = (Z1 × At. mass)/(Av. no. × V1) and density of bcc = (Z2 × At. mass)/(Av. no. × V2).

dfcc/dbcc = (Z1/Z2) × (V2/V1)

For fcc Z1 = 4, V1 = a³ = (3.5 × 10-8)³; for bcc Z2 = 2, V2 = (3.0 × 10-8)³.

dfcc/dbcc = (4 × (3.0 × 10-8)³)/(2 × (3.5 × 10-8)³) = 1.259

Teacher's Note: Same metal, so atomic mass cancels: ratio = (Z1/Z2)(a2/a1)³.

Exam Note: Atomic mass cancels; only Z and a³ matter.

Example 10. A solid AB has the NaCl structure. If radius of the cation A+ is 120 pm, calculate the maximum value of the radius of the anion B-.

Solution.

Since NaCl has octahedral structure, the limiting ratio rA+/rB- = 0.414.

rB- = 120/0.414 = 290 pm

Teacher's Note: Octahedral hole needs r+/r- ≥ 0.414, so anion is largest at 0.414.

Exam Note: Radius-ratio limit 0.414 for octahedral coordination.

Example 11. You are given marbles of diameter 10 mm. They are to be placed such that their centres are lying in a square bond by four lines each of length 40 mm. What will be the arrangement of marbles in a plane, so that, maximum number of marbles can be placed inside the area. Sketch the diagram and derive expression for the number of marbles per unit area. (IIT 2003)

Solution.

In order to accommodate maximum number of spheres, there should be hcp (hexagonal closed packing). The book's figure shows rows of marbles in a 4 cm × 4 cm square (PQRS) in which alternate rows are displaced by half a marble, so that each marble touches six neighbours; adjacent rows are separated by CD = 10 sin 60° = 10√3/2 = 5√3 mm (triangle ABC with sides 10 mm and angle 60°).

Area of square having spherical marbles = 16 cm². Maximum number of spheres = 14 (full) + 8 (half) = 18.

Per unit area (per cm²) = 18/16 = 1.125.

Length PQ of square = 4 cm; length PR = 5 + 4 × 5√3 = 40 mm = 4 cm (book).

Note: for an infinite hexagonally packed plane the number of marbles per unit area is 2/(√3 d²) = 1.155 per cm² for d = 1 cm; the book's finite-square count is 1.125 per cm². The figure is described in words here.

Teacher's Note: Hexagonal (staggered) rows pack circles densest; row spacing is d sin 60°.

Exam Note: Staggered rows, spacing 5√3 mm, gives 1.125 per cm².

Example 12. Calculate the density of diamond from the fact that it has face-centred cubic structure with two atoms per lattice point and a unit cell of edge length 3.569 Å.

Solution.

Z = 8, M = 12.

Density ρ = ZM/(l³N) = (8 × 12)/((3.569 × 10-8)³ × 6.023 × 1023) = 3.506 g cm-3

Teacher's Note: fcc with two atoms per lattice point gives Z = 4 × 2 = 8.

Exam Note: Z = 8 for diamond; M = 12.

Example 13. An element crystallises into a structure which may be described by a cubic unit cell having one atom on each corner of the cube and two atoms on one of its diagonals. If the volume of this unit cell is 24 × 10-24 cm³ and density of element is 7.2 g/cm³. Calculate the number of atoms present in 200 g of the element.

Solution.

Number of atoms in a unit cell (Z) = 1 + 2 = 3.

M = (l³ × ρ × N)/Z = (24 × 10-24 × 7.2 × 6.023 × 1023)/3 = 34.69

Number of atoms = (mass/molar mass) × 6.023 × 1023 = (200/34.69) × 6.023 × 1023 = 3.47 × 1024

Teacher's Note: Z = 1 (corners) + 2 = 3; use density to get molar mass first.

Exam Note: Find M from ρ, then convert 200 g to atoms.

Example 14. Analysis shows that nickel oxide has formula Ni0.98O1. What fraction of nickel exist as Ni2+ and Ni3+ ions?

Solution.

Let number of Ni3+ ions = x. Number of Ni2+ ions = (0.98 − x).

Since the molecule is neutral, total charge is zero: (+3 × x) + (0.98 − x) × 2 − 2 = 0, i.e., x = 0.04.

Ni3+ = 0.04; Ni2+ = 0.94.

As fractions of the nickel: Ni2+ = 0.94/0.98 = 95.9%, Ni3+ = 0.04/0.98 = 4.1% (percentages computed here).

Teacher's Note: Charge balance in a metal-deficient oxide: 2(0.98 − x) + 3x = 2.

Exam Note: Write the charge-neutrality equation first.

Example 15. Calcium crystallises in face-centred cubic unit cell with a = 0.556 nm. Calculate the density if (i) it contained 0.1% Frenkel defect. (ii) it contained 0.1% Schottky defect.

Solution.

(i) Frenkel defect does not alter the density of solid. d = MZ/(l³N) = (40 × 4)/((0.556 × 10-7)³ × 6.023 × 1023) = 1.5455 g/cm³.

(ii) Schottky defect lowers the density of solid. Z = 4 − (4 × 0.1)/100 = 3.996.

d = (40 × 3.996)/((0.556 × 10-7)³ × 6.023 × 1023) = 1.5440 g/cm³

Teacher's Note: Frenkel only shifts ions, so density is unchanged; Schottky removes atoms, lowering Z.

Exam Note: Frenkel: density unchanged; Schottky: density decreases.

Example 16. Density of lithium atom is 0.53 g/cm³. The edge length of Li is 3.5 Å. Find out the number of lithium atoms in a unit cell. Atomic mass of lithium is 6.94. (CBSE-PMT (Mains) 2005)

Solution.

Z = (a³ × ρ × NA)/M = ((3.5 × 10-8)³ × 0.53 × 6.023 × 1023)/6.94 = 2

Teacher's Note: Z = a³ρNA/M; result 1.97 rounds to 2 (bcc).

Exam Note: Round Z to a whole number; 2 means bcc.

Example 17. Cu metal crystallises in face centred cubic lattice with a = 361.6 pm. What is the density of Cu crystal? (Atomic mass of copper = 63.5 amu, NA = 6.023 × 1023) (CBSE-PMT (Mains) 2008)

Solution.

Z = a³dNA/M, so d = ZM/(a³NA).

Z = 4 for fcc unit cell; M = 63.5 g mol-1; a = 361.6 × 10-10 cm; NA = 6.023 × 1023.

d = (4 × 63.5)/((361.6 × 10-10)³ × 6.023 × 1023) = 8.92 g cm-3

Corrected: the book prints 8.94 g cm-3; recomputing with the given data gives 8.92 g cm-3.

Teacher's Note: fcc: Z = 4; convert pm to cm before cubing.

Exam Note: Convert pm to cm: 1 pm = 10-10 cm.

Example 18. An LPG cylinder weighs 14.8 kg when empty. When full, it weighs 29 kg and shows a pressure of 2.5 atm. In the course of use at 27°C, the weight of the full cylinder reduced to 23.2 kg. Find out the volume of n-butane used at 27°C and 1 atm in cubic metres. [Molecular mass of n-butane = 58] (CBSE-PMT (Mains) 2008)

Solution.

Mass of n-butane used = 29 − 23.2 = 5.8 kg.

Number of moles of butane used = 5800/58 = 100.

V = nRT/P = (100 × 0.0821 × 300)/1 = 2463 litre = 2.463 m³

Teacher's Note: Mass lost gives moles; then ideal gas law at 1 atm and 300 K.

Exam Note: Convert litres to m³: divide by 1000.

Example 19. rNa+ and rCl- represents radius of Na+ and Cl- ions respectively. If 'n' is the number of NaCl units per unit cell then give the equation you will use to obtain molar volume. (CBSE-PMT (Mains) 2009)

Solution.

Edge length of unit cell a = 2(rNa+ + rCl-).

Volume of unit cell = a³ = 8(rNa+ + rCl-)³.

Volume occupied by one mole of NaCl = [8(rNa+ + rCl-)³/n] × NA, where NA = 6.023 × 1023.

Teacher's Note: Cell volume divided by n gives volume per formula unit; multiply by NA.

Exam Note: Molar volume = (cell volume/n) × NA.

Example 20. Two gases A and B of mass 70.6 g and 167.5 g (Mw of A = 32 and Mw of B = 20) are mixed. Then total pressure of mixture is 25 bar. Calculate the partial pressure of A and B. (CBSE-PMT (Mains) 2009)

Solution.

Number of moles of A, nA = 70.6/32 = 2.2 (2.206).

Number of moles of B, nB = 167.5/20 = 8.375.

Partial pressure of gas A, pA = (nA/(nA + nB)) × p = (2.2/(2.2 + 8.375)) × 25 = 5.20 bar (5.21 bar using 2.206).

pB = 25 − 5.20 = 19.8 bar (19.79 bar).

Teacher's Note: Partial pressure = mole fraction × total pressure.

Exam Note: Compute moles first, then mole fractions.

Step-by-Step OP Tandon Solutions for JEE Math

Download OP Tandon Solutions for JEE

Review detailed solutions for JEE Mathematics. The OP Tandon Solutions Physical Chemistry IIT JEE Chapter 4 States Of Matter Part 2 PDF provides comprehensive answers mapped to standard OP Tandon Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Complete Your JEE Exam Preparation

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.