Download JEE Chemistry Narendra Awasthi Textbook Solutions: Chapter 04 Thermodynamics
Access comprehensive textbook solutions for Chapter 04 Thermodynamics using the Narendra Awasthi reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.
Access Narendra Awasthi Textbook Answers and Solutions
View or download the dedicated Chapter 04 Thermodynamics solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
Narendra Awasthi Physical Chemistry Chapter 4 Thermodynamics - Level 1 and Level 2 (Part 1)
Level 1 - Problems in Chemistry (Chapter 4 Thermodynamics)
Question 1. Out of molar entropy (I), specific volume (II), heat capacity (III), volume (IV), extensive properties are:
(a) I, II (b) I, II, IV (c) II, III (d) III, IV
Solution. Molar entropy and specific volume are per mole or per unit mass, so they are intensive. Heat capacity and volume depend on the amount of matter, so they are extensive. Hence (d) III, IV.
Teacher's Note: Dividing an extensive property by amount (mole or mass) gives an intensive property.
Exam Note: Molar and specific quantities are intensive.
Question 2. Out of internal energy (I), boiling point (II), pH (III) and E.M.F. of the cell (IV), intensive properties are:
(a) I, II (b) II, III, IV (c) I, III, IV (d) All of these
Solution. Internal energy depends on the amount of substance (extensive). Boiling point, pH and cell e.m.f. do not depend on amount (intensive). Answer (b) II, III, IV.
Teacher's Note: Test: halve the sample; if the value halves it is extensive, if unchanged it is intensive.
Exam Note: Quote the halving test to justify the choice.
Question 3. Thermodynamic equilibrium involves:
(a) Chemical equilibrium (b) Mechanical equilibrium (c) Thermal equilibrium (d) All the above simultaneously
Solution. A system is in thermodynamic equilibrium only when thermal, mechanical and chemical equilibrium all hold together. Answer (d).
Teacher's Note: Thermodynamic equilibrium = thermal + mechanical + chemical equilibrium, all at once.
Exam Note: State all three equilibria to earn the mark.
Question 4. Which has maximum internal energy at 290 K?
(a) Neon gas (b) Nitrogen gas (c) Ozone gas (d) Equal
Solution. Answer (from key): (c) Ozone. For the same amount of gas at the same temperature, internal energy is larger for molecules with more degrees of freedom (translational, rotational, vibrational). Non-linear triatomic ozone has the most, then diatomic N2, then monatomic Ne.
Teacher's Note: Equal moles and equal T assumed; more degrees of freedom means more stored energy.
Exam Note: Link internal energy to degrees of freedom, not just T.
Question 5. A 10 g piece of iron (C = 0.45 J/g°C) at 100°C is dropped into 25 g of water (C = 4.2 J/g°C) at 27°C. Find the temperature of the iron and water system at thermal equilibrium.
(a) 30°C (b) 33°C (c) 40°C (d) None of these
Solution. Heat lost by iron = heat gained by water:
10 × 0.45 × (373 − T) = 25 × 4.2 × (T − 300)
1678.5 − 4.5T = 105T − 31500 → 109.5T = 33178.5 → T = 303 K = 30°C. Answer (a).
Teacher's Note: Calorimetry: heat lost by hot body equals heat gained by cold body; use mass × specific heat.
Exam Note: Write the heat-balance equation first; then solve.
Question 6. When freezing of a liquid takes place in a system:
(a) may have q > 0 or q < 0 depending on the liquid (b) is represented by q > 0 (c) is represented by q < 0 (d) has q = 0
Solution. Freezing always releases heat (latent heat of fusion) to the surroundings, so q < 0 for the system. Answer (c).
Teacher's Note: Freezing is exothermic for every liquid; the system loses heat, so q is negative.
Exam Note: Sign convention: heat lost by system is negative.
Question 7. Mechanical work is specially important in systems that contain:
(a) gas-liquid (b) liquid-liquid (c) solid-solid (d) amalgam
Solution. Pressure-volume work matters when volume changes appreciably, which happens when a gas is present. Answer (a).
Teacher's Note: P–V work is significant only when gases are formed or consumed, as volume change is large.
Exam Note: Large volume change needs a gas phase.
Question 8. Determine which of the following reactions taking place at constant pressure represents system that do work on the surrounding environment:
I. Ag+(aq) + Cl−(aq) → AgCl(s) II. NH4Cl(s) → NH3(g) + HCl(g) III. 2NH3(g) → N2(g) + 3H2(g)
(a) I (b) III (c) II and III (d) I and II
Solution. The system does work on the surroundings when its volume increases, i.e. Δng > 0. I: no gas, so no work. II: Δng = +2. III: Δng = 4 − 2 = +2. Answer (c) II and III.
Teacher's Note: Work on surroundings means gas moles increase (Δng > 0); count only gaseous species.
Exam Note: Compute Δng for each reaction.
Question 9. Determine which of the following reactions taking place at constant pressure represent surrounding that do work on the system environment:
I. 4NH3(g) + 7O2(g) → 4NO2(g) + 6H2O(g) II. CO(g) + 2H2(g) → CH3OH(l) III. C(s, graphite) + H2O(g) → CO(g) + H2(g) IV. H2O(s) → H2O(l)
(a) III, IV (b) II and III (c) II, IV (d) I and II, IV
Solution. Surroundings do work on the system when volume decreases. I: Δng = 10 − 11 = −1. II: 3 mol gas → liquid, volume falls. III: Δng = +1, so the system does work. IV: ice melts with a decrease in volume. So I, II and IV: (d).
Teacher's Note: Volume decrease means work done on the system: Δng < 0, or ice melting (volume shrinks).
Exam Note: Ice to water is a rare volume decrease.
Question 10. A sample of liquid in a thermally insulated container (a calorimeter) is stirred for 2 hr. by a mechanical linkage to a motor in the surrounding, for this process:
(a) w < 0; q = 0; ΔU = 0 (b) w > 0; q > 0; ΔU > 0 (c) w < 0; q > 0; ΔU = 0 (d) w > 0; q = 0; ΔU > 0
Solution. Stirring does work on the liquid, so w > 0. The container is insulated, so q = 0. Then ΔU = q + w = w > 0. Answer (d).
Teacher's Note: Insulated means q = 0; work done on the system raises internal energy: ΔU = w.
Exam Note: Apply ΔU = q + w with correct signs.
Question 11. A system undergoes a process in which ΔE = +300 J while absorbing 400 J of heat energy and undergoing an expansion against 0.5 bar. What is the change in the volume (in L)?
(a) 4 (b) 5 (c) 2 (d) 3
Solution. ΔE = q + w → 300 = 400 + w → w = −100 J.
w = −PΔV → ΔV = 100 / (0.5 × 105 Pa) = 2 × 10−3 m³ = 2 L. Answer (c).
Teacher's Note: Get w from ΔE = q + w, then ΔV = −w/P with P in pascal.
Exam Note: Convert bar to Pa; 1 m³ = 1000 L.
Question 12. An ideal gas expands against a constant external pressure of 2.0 atmosphere from 20 litre to 40 litre and absorbs 10 kJ of heat from surrounding. What is the change in internal energy of the system? (Given: 1 atm-litre = 101.3 J)
(a) 4052 J (b) 5948 J (c) 14052 J (d) 9940 J
Solution. w = −PΔV = −2.0 × 20 × 101.3 = −4052 J.
ΔU = q + w = 10000 − 4052 = 5948 J. Answer (b).
Teacher's Note: Expansion gives negative w; convert atm·L to joules before adding to q in joules.
Exam Note: Keep units in J before ΔU = q + w.
Question 13. One mole of an ideal gas at 25°C expands in volume from 1.0 L to 4.0 L at constant temperature. What work (in J) is done if the gas expands against vacuum (Pexternal = 0)?
(a) −4.0 × 102 (b) −3.0 × 102 (c) −1.0 × 102 (d) Zero
Solution. w = −PextΔV and Pext = 0, so w = 0. Answer (d).
Teacher's Note: Free expansion against vacuum does no work whatever the volume change.
Exam Note: Zero external pressure means zero work.
Question 14. At 25°C, a 0.01 mole sample of a gas is compressed from 4.0 L to 1.0 L at constant temperature. What is the work done for this process if the external pressure is 4.0 bar?
(a) 1.6 × 103 J (b) 8.0 × 102 J (c) 4.0 × 102 J (d) 1.2 × 103 J
Solution. Irreversible compression against constant Pext = 4.0 bar:
w = −Pext(V2 − V1) = −4.0 × (1.0 − 4.0) = +12 bar·L = 12 × 100 J = 1.2 × 103 J. Answer (d).
Teacher's Note: Use the external pressure, not the gas pressure; 1 bar·L = 100 J.
Exam Note: Positive work on compression; convert bar·L to J.
Question 15. Calculate the work done (in J) when 4.5 g of H2O2 reacts against a pressure of 1.0 atm at 25°C:
2H2O2(l) → O2(g) + 2H2O(l)
(a) −1.63 × 102 (b) 4.5 × 102 (c) 3.2 × 102 (d) −6.1 × 102
Solution. n(H2O2) = 4.5/34 = 0.132 mol → n(O2) = 0.0662 mol (Δng = +0.0662).
w = −ΔngRT = −0.0662 × 8.314 × 298 ≈ −1.64 × 102 J, i.e. option (a) −1.63 × 102 J.
Teacher's Note: Only the gas produced (O2) pushes against the atmosphere: w = −ΔngRT.
Exam Note: Liquids contribute negligible volume change.
Question 16. 2 mole of zinc is dissolved in HCl at 25°C. The work done in open vessel is:
(a) −2.477 kJ (b) −4.955 kJ (c) 0.0489 kJ (d) None
Solution. Zn + 2HCl → ZnCl2 + H2: 2 mol Zn give 2 mol H2.
w = −PΔV = −n(H2)RT = −2 × 8.314 × 298 / 1000 = −4.955 kJ. Answer (b).
Teacher's Note: The H2 evolved pushes the atmosphere back, so w = −nRT for gas produced.
Exam Note: One mole of H2 per mole of Zn.
Question 17. Temperature of 1 mole of a gas is increased by 2°C at constant pressure, work done is:
(a) R (b) 2R (c) R/2 (d) 3R
Solution. w = −PΔV = −nRΔT = −1 × R × 2 = −2R; the magnitude of work is 2R. Answer (b).
Teacher's Note: At constant pressure PΔV = nRΔT for an ideal gas.
Exam Note: Magnitude 2R; sign negative for expansion.
Question 18. A sample of an ideal gas is expanded 1 m³ to 3 m³ in a reversible process for which P = KV², with K = 6 bar/m⁶. Work done by the gas is:
(a) 5200 kJ (b) 15600 kJ (c) 52 kJ (d) 5267.6 kJ
Solution. W = ∫P dV = 6∫13V² dV = 6 × (27 − 1)/3 = 52 bar·m³.
1 bar·m³ = 100 kJ, so W = 5200 kJ (work done by the gas). Answer (a).
Teacher's Note: Integrate P dV for the given P(V) law; 1 bar·m³ = 105 J = 100 kJ.
Exam Note: Unit conversion bar·m³ to kJ is where marks are lost.
Question 19. A given mass of gas expands reversibly from the state A to the state B by three paths 1, 2 and 3 as shown in the figure. If w1, w2 and w3 respectively be the work done by the gas along three paths then:
(a) w1 > w2 > w3 (b) w1 < w2 < w3 (c) w1 = w2 = w3 (d) w2 < w3 < w1
Solution. Work done by the gas equals the area under the P–V curve. Path 1 lies lowest and path 3 highest, so the areas satisfy w1 < w2 < w3. Answer (b).
Teacher's Note: Work is a path function: it equals the area under each P–V curve.
Exam Note: Compare areas under curves, not end states.
Question 20. Heat absorbed by a system in going through a cyclic process shown in figure is:
(a) 107 π J (b) 106 π J (c) 102 π J (d) 104 π J
Solution. For a cycle ΔU = 0, so q = −w. Net work = area enclosed = π × (10 kPa)(10 L) = 100π kPa·L = 100π J (1 kPa·L = 1 J).
Heat absorbed = 102π J. Answer (c).
Teacher's Note: Cyclic process: ΔU = 0, so q = −w = enclosed area; kPa·L equals joule.
Exam Note: Circle area uses semi-axes in P and V units.
Question 21. In the cyclic process shown in P–V diagram, the magnitude of the work done is:
(a) π((P2 − P1)/2)2 (b) π((V2 − V1)/2)2 (c) (π/4)(P2 − P1)(V2 − V1) (d) π(V2 − V1)2
Solution. The cycle is an ellipse with semi-axes (P2 − P1)/2 and (V2 − V1)/2. Work magnitude = enclosed area = π × (P2 − P1)/2 × (V2 − V1)/2 = (π/4)(P2 − P1)(V2 − V1). Answer (c).
Teacher's Note: A circle on P–V axes with unequal scales is an ellipse; area = π × semi-axis product.
Exam Note: Work of a cycle = enclosed area; check which axis units.
Question 22. An ideal gas is taken around the cycle ABCA as shown in P–V diagram. The net work done during the cycle is equal to:
(a) 12P1V1 (b) 6P1V1 (c) 5P1V1 (d) P1V1
Solution. Net work = area of triangle ABC = ½ × base × height = ½ × (3V1 − V1) × (6P1 − P1) = ½ × 2V1 × 5P1 = 5P1V1. Answer (c).
Teacher's Note: Net cycle work is the enclosed triangle area: ½ × base × height.
Exam Note: Use differences (3V1 − V1), (6P1 − P1).
Question 23. An ideal gas is at pressure P and temperature T in a box, which is kept in a large container. The wall of the box is punctured. What happens as the gas occupies entire container?
(a) It's temperature falls (b) Its temperature rises (c) Its temperature remains the same (d) Unpredictable
Solution. This is a free expansion into vacuum: q = 0, w = 0, so ΔU = 0. For an ideal gas U depends only on T, so the temperature remains the same. Answer (c).
Teacher's Note: Joule expansion of an ideal gas: ΔU = 0 and U depends only on T.
Exam Note: Real gases would cool slightly; ideal gas does not.
Question 24. In diagrams (1 to 4), variation of volume with changing pressure is shown. A gas is taken along the path ABCD. The change in internal energy of the gas will be:
Figure (four V–P diagrams, each a closed loop A→B→C→D→A, V on the vertical axis and P on the horizontal axis): (1) a loop with gently curved top and bottom edges; (2) a circle; (3) a rectangle; (4) a loop with a curved top edge and a curved bottom edge. In every case the path returns to its starting point A.
(a) Positive in all the cases (1) to (4) (b) Positive in cases (1), (2), (3) but zero in case (4) (c) Negative in cases (1), (2), (3) but zero in case (4) (d) Zero in all the cases
Solution. In every diagram the path ABCD starts and ends at the same state, so it is a cyclic process. Internal energy is a state function, so ΔU = 0 in all four cases. Answer (d).
Teacher's Note: U is a state function: any closed path gives ΔU = 0 whatever the shape.
Exam Note: Cyclic path means ΔU = 0; work need not be zero.
Question 25. If the door of a refrigerator is kept open, the room in which the refrigerator is kept:
(a) gets cooled (b) gets heated (c) neither gets cooled nor gets heated (d) gets cooled or heated depending on the initial temperature of the room
Solution. The compressor does electrical work and the refrigerator rejects heat equal to (heat removed + work input) into the room. With the door open the room is the only sink, so the room gets heated. Answer (b).
Teacher's Note: Heat pumped out plus the compressor work all ends up in the room, warming it.
Exam Note: Energy conservation: net heat released exceeds heat absorbed.
Question 26. The temperature of an ideal gas increases in an:
(a) adiabatic expansion (b) isothermal expansion (c) adiabatic compression (d) isothermal compression
Solution. In adiabatic compression q = 0 and w > 0, so ΔU = w > 0 and the temperature rises. Isothermal changes keep T constant; adiabatic expansion lowers T. Answer (c).
Teacher's Note: Adiabatic: ΔU = w; compression adds energy so T rises.
Exam Note: Eliminate isothermal options first.
Question 27. For two mole of an ideal gas:
(a) Cv − Cp = R (b) Cp − Cv = 2R (c) Cp − Cv = R (d) Cv − Cp = 2R
Solution. Cp,m − Cv,m = R per mole, so for n = 2 mol the heat capacities differ by nR = 2R: Cp − Cv = 2R. Answer (b).
Teacher's Note: Molar heat capacities differ by R; for n moles the difference is nR.
Exam Note: Distinguish heat capacity from molar heat capacity.
Question 28. Which of the following expressions is true for an ideal gas?
(a) (∂V/∂T)P = 0 (b) (∂P/∂T)V = 0 (c) (∂U/∂V)T = 0 (d) (∂U/∂T)V = 0
Solution. Internal energy of an ideal gas depends only on temperature, so (∂U/∂V)T = 0. The other three partial derivatives are non-zero (nR/P, nR/V and CV). Answer (c).
Teacher's Note: No intermolecular forces: U independent of volume at constant T.
Exam Note: Joule's law: (∂U/∂V)T = 0.
Question 29. Liquefied oxygen at 1 atmosphere is heated from 50 K to 300 K by supplying heat at a constant rate. The graph that correctly shows the relationship between temperature and time is:
Figure (four T versus t graphs, t on the horizontal axis): (a) a straight rising line; (b) a rising curve that bends upward; (c) a rising line, then a flat horizontal part, then a rising line again; (d) a short dip followed by an upward-curving rise.
(a) a straight line rising steadily (b) a rising curve (concave) (c) rising line, a horizontal plateau, then rising again (d) a dip followed by a rising curve
Solution. Temperature rises steadily while the liquid is heated, stays constant (horizontal plateau) during boiling at the normal boiling point, then rises again as vapour is heated at constant supply rate. Answer (c).
Teacher's Note: During a phase change heat goes into latent heat, so temperature stays constant (plateau).
Exam Note: Plateau at boiling point; slopes differ with heat capacity.
Question 30. If w1, w2, w3 and w4 for an ideal gas are magnitude of work done in isothermal, adiabatic, isobaric and isochoric reversible expansion processes, the correct order will be:
(a) w1 > w2 > w3 > w4 (b) w3 > w2 > w1 > w4 (c) w3 > w2 > w4 > w1 (d) w3 > w1 > w2 > w4
Solution. On a P–V diagram from the same initial state to the same final volume, the isobaric line lies highest, then the isotherm, then the steeper adiabat; the isochoric process has no volume change so w4 = 0. Hence w3 > w1 > w2 > w4: (d).
Teacher's Note: Areas under P–V curves: isobar > isotherm > adiabat > isochore (zero).
Exam Note: Adiabat falls faster than isotherm, giving less area.
Question 31. For a closed container containing 100 mole of an ideal gas fitted with movable, frictionless, weightless piston operating such that pressure of gas remains constant at 8.21 atm, which graph represents correct variation of log V vs. log T where V is in litre and T in kelvin.
Figure (four log V versus log T graphs): (a) a straight line through the origin at 45°; (b) a straight line through the origin at 30°; (c) a 45° line with a horizontal dotted guide marking an intercept of 1; (d) a graph with the axes interchanged (log T against log V) showing a line that starts on the axis and then rises.
(a) straight line of slope 1 (45°) passing through the origin (b) straight line at 30° (c) 45° line with an intercept (d) log T against log V
Solution. V = nRT/P = (100 × 0.0821 × T)/8.21 = T. Hence log V = log T: a straight line through the origin with slope 1 (45°). Answer (a).
Teacher's Note: At constant P, V = nRT/P; here nR/P = 1 L/K, so V = T numerically.
Exam Note: Compute nR/P; slope of log–log line is 1.
Question 32. A gas expands against a variable pressure given by P = 20/V (where P in atm and V in L). During expansion from volume of 1 litre to 10 litre, the gas undergoes a change in internal energy of 400 J. How much heat is absorbed by the gas during expansion?
(a) 46 J (b) 4660 J (c) 5065.8 J (d) 4260 J
Solution. Work by gas = ∫P dV = 20 ln 10 = 46.05 L·atm ≈ 46.06 × 101.3 ≈ 4665.8 J, so w = −4665.8 J.
ΔU = q + w → 400 = q − 4665.8 → q = 5065.8 J. Answer (c).
Teacher's Note: Integrate P dV with P = 20/V to get a logarithm; then q = ΔU − w.
Exam Note: Convert L·atm to J; sign of w negative.
Question 33. 2 mole of an ideal gas at 27°C expands isothermally and reversibly from a volume of 4 litre to 40 litre. The work done (in kJ) by the gas is:
(a) w = −28.72 kJ (b) w = −11.488 kJ (c) w = −5.736 kJ (d) w = −4.988 kJ
Solution. w = −nRT ln(V2/V1) = −2 × 8.314 × 300 × ln 10 = −2 × 8.314 × 300 × 2.303 = −11487 J ≈ −11.488 kJ. Answer (b).
Teacher's Note: Reversible isothermal work: w = −nRT ln(V2/V1) = −2.303 nRT log(V2/V1).
Exam Note: Tenfold volume gives log = 1; quick check.
Question 34. 10 mole of ideal gas expand isothermally and reversibly from a pressure of 10 atm to 1 atm at 300 K. What is the largest mass which can lifted through a height of 100 meter?
(a) 31842 kg (b) 58.55 kg (c) 342.58 kg (d) None of these
Solution. Maximum work (reversible): |w| = nRT ln(P1/P2) = 10 × 8.314 × 300 × ln 10 = 57441 J.
mgh = 57441 → m = 57441/(9.81 × 100) = 58.55 kg. Answer (b).
Teacher's Note: Reversible work is the maximum obtainable; equate it to mgh.
Exam Note: Take g = 9.81 m s−2.
Question 35. A heat engine carries one mole of an ideal mono-atomic gas around the cycle as shown in the figure. Select the correct option:
(a) qAB = 450R and qCA = −450R (b) qAB = 450R and qCA = −225R (c) qAB = 450R and qCA = −375R (d) qAB = 375R and qCA = −450R
Solution. AB is at constant volume: qAB = nCvΔT = 1 × (3/2)R × (600 − 300) = 450R.
CA is at constant pressure: qCA = nCpΔT = (5/2)R × (300 − 450) = −375R. Answer (c).
Teacher's Note: Isochoric step uses Cv, isobaric step uses Cp; monatomic gas: 3R/2 and 5R/2.
Exam Note: Match each step to its heat capacity.
Question 36. What is the final temperature of 0.10 mole monoatomic ideal gas that performs 75 cal of work adiabatically if the initial temperature is 227°C? (use R = 2 cal/K-mol)
(a) 250 K (b) 300 K (c) 350 K (d) 750 K
Solution. Adiabatic: ΔU = w = −75 cal (work done by gas).
0.1 × (3/2) × 2 × (T2 − 500) = −75 → 0.3(T2 − 500) = −75 → T2 = 250 K. Answer (a).
Teacher's Note: In an adiabatic expansion the gas pays for its work out of internal energy.
Exam Note: Initial T = 500 K; use ΔU = nCvΔT.
Question 37. The work done by the gas in reversible adiabatic expansion process is:
(a) (P2V2 − P1V1)/(γ − 1) (b) nR(T1 − T2)/(γ − 1) (c) (P2V2 − P1V1)/γ (d) None of these
Solution. For an adiabatic process w = ΔU = nCv(T2 − T1) = nR(T2 − T1)/(γ − 1) = (P2V2 − P1V1)/(γ − 1). Answer (from key): (a) (this is w in the IUPAC sign convention, i.e. work on the gas).
Teacher's Note: Adiabatic work: w = ΔU = nCvΔT with Cv = R/(γ − 1).
Exam Note: Know both forms of the adiabatic work formula.
Question 38. During an adiabatic process, the pressure of gas is found to be proportional to the cube of its absolute temperature. The ratio of (Cp,m/Cv,m) for gas is:
(a) 3/2 (b) 5/3 (c) 7/2 (d) 4/3
Solution. For a reversible adiabatic process TγP1−γ = constant, so P ∝ Tγ/(γ−1). Given P ∝ T3: γ/(γ − 1) = 3 → γ = 3/2. Answer (a).
Teacher's Note: Convert the adiabatic relation to P versus T and match the exponent.
Exam Note: P ∝ Tγ/(γ−1) is the key relation.
Question 39. A gas expands adiabatically at constant pressure such that T ∝ V−1/2. The value of γ (Cp,m/Cv,m) of the gas will be:
(a) 1.30 (b) 1.50 (c) 1.70 (d) 2
Solution. For adiabatic process TVγ−1 = constant, so T ∝ V−(γ−1). Compare with T ∝ V−1/2: γ − 1 = 1/2 → γ = 1.50. Answer (b).
Teacher's Note: Compare exponents in T ∝ V1−γ with the given law.
Exam Note: γ − 1 equals the magnitude of the exponent.
Question 40. For a reversible adiabatic ideal gas expansion dP/P is equal to:
(a) γ dV/V (b) −γ dV/V (c) (γ/(γ−1)) dV/V (d) dV/V
Solution. PVγ = constant. Differentiating: VγdP + γPVγ−1dV = 0 → dP/P = −γ dV/V. Answer (b).
Teacher's Note: Differentiate PVγ = constant (log differentiation is quickest).
Exam Note: Negative sign: pressure falls as volume rises.
Question 41. P–V plot for two gases (assuming ideal) during adiabatic processes are given in the Fig. Plot A and plot B should correspond respectively to:
(a) He and H2 (b) H2 and He (c) He and Ne (d) H2 and Cl2
Solution. In a reversible adiabatic process PVγ = constant, so a larger γ gives a steeper fall in pressure. Curve B falls faster than A, so B has the larger γ: He (1.67) for B and H2 (1.40) for A. Answer (b) H2 and He.
Teacher's Note: Greater γ means steeper adiabat; monatomic He has γ = 5/3, diatomic H2 has 7/5.
Exam Note: Steeper curve belongs to the monatomic gas.
Question 42. Calculate the final temperature of a monoatomic ideal gas that is compressed reversible and adiabatically from 16 L to 2 L at 300 K:
(a) 600 K (b) 1044.6 K (c) 1200 K (d) 2400 K
Solution. TVγ−1 = constant with γ = 5/3: T2 = 300 × (16/2)2/3 = 300 × 4 = 1200 K. Answer (c).
Teacher's Note: Eightfold compression: 82/3 = 4, so T rises fourfold.
Exam Note: Use γ − 1 = 2/3 for monatomic gas.
Question 43. 5 mole of an ideal gas expand isothermally and irreversibly from a pressure of 10 atm to 1 atm against a constant external pressure of 1 atm. wirr at 300 K is:
(a) −15.921 kJ (b) −11.224 kJ (c) −110.83 kJ (d) None of these
Solution. w = −Pext(V2 − V1) = −Pext(nRT/P2 − nRT/P1) = −1 × nRT (1 − 1/10)
= −0.9 × 5 × 8.314 × 300 = −11224 J = −11.224 kJ. Answer (b).
Teacher's Note: Irreversible work uses Pext only; it is smaller than the reversible work.
Exam Note: Express V in terms of nRT/P for each end state.
Question 44. With what minimum pressure (in kPa), a given volume of an ideal gas (Cp,m = 7/2 R), originally at 400 K and 100 kPa pressure can be compressed irreversibly adiabatically in order to raise its temperature to 600 K:
(a) 362.5 kPa (b) 275 kPa (c) 437.5 kPa (d) 550 kPa
Solution. Here Cv,m = 5R/2. For irreversible adiabatic compression ΔU = w with Pext = P2:
(5R/2)(600 − 400) = −P2(RT2/P2 − RT1/P1) = −R(600 − 4P2) (P in units of 100 kPa)
500 = −600 + 4P2 → P2 = 2.75 × 100 = 275 kPa. Answer (b).
Teacher's Note: Set nCvΔT = −PextΔV with Pext equal to the final pressure.
Exam Note: Final pressure is the external pressure applied.
Question 45. The work done in adiabatic compression of 2 mole of an ideal monoatomic gas against constant external pressure of 2 atm starting from initial pressure of 1 atm and initial temperature of 300 K (R = 2 cal/mol-degree):
(a) 360 cal (b) 720 cal (c) 800 cal (d) 1000 cal
Solution. ΔU = w = −Pext(V2 − V1) with V2 = nRT2/Pext and V1 = nRT1/P1. Per mole (R = 2 cal): 1.5(T2 − 300) = −(T2 − 2 × 300/1) = −(T2 − 600) → 2.5T2 = 1050 → T2 = 420 K.
w = nCvΔT = 2 × 3 × 120 = 720 cal. Answer (b).
Teacher's Note: Solve for T2 first from ΔU = −PextΔV, then w = nCv(T2 − T1).
Exam Note: Positive work on compression; Cv = 3 cal/K·mol.
Question 46. One mole of an ideal gas (Cv,m = 5/2 R) at 300 K and 5 atm is expanded adiabatically to a final pressure of 2 atm against a constant pressure of 2 atm. Final temperature of the gas is:
(a) 270 K (b) 273 K (c) 248.5 K (d) 200 K
Solution. q = 0 so ΔU = w: (5/2)R(T2 − 300) = −2R(T2/2 − 300/5) = −R(T2 − 120)
2.5T2 − 750 = −T2 + 120 → 3.5T2 = 870 → T2 = 248.6 K ≈ 248.5 K. Answer (c).
Teacher's Note: Irreversible adiabatic expansion: equate nCvΔT to −PextΔV and solve linearly.
Exam Note: Gas cools less than in a reversible expansion.
Question 47. 10 litre of a non linear polyatomic ideal gas at 127°C and 2 atm pressure is suddenly released to 1 atm pressure and the gas expanded adiabatically against constant external pressure, the final temperature and volume of the gas respectively are:
(a) T = 350 K; V = 17.5 L (b) T = 300 K; V = 15 L (c) T = 250 K; V = 12.5 L (d) None of these
Solution. Non-linear polyatomic: Cv,m = 3R. ΔU = w: 3(T2 − 400) = −(T2 − 400 × 1/2) = −(T2 − 200) → 4T2 = 1400 → T2 = 350 K.
P1V1/T1 = P2V2/T2 → 2 × 10/400 = 1 × V2/350 → V2 = 17.5 L. Answer (a).
Teacher's Note: Non-linear polyatomic gas has Cv = 3R; then solve ΔU = −PextΔV.
Exam Note: Use the combined gas law for the final volume.
Question 48. Calculate average molar heat capacity at constant volume of gaseous mixture contained 2 mole of each of two ideal gases A (Cv,m = 3/2 R) and B (Cv,m = 5/2 R):
(a) R (b) 2R (c) 3R (d) 8R
Solution. Average Cv,m = (n1Cv1 + n2Cv2)/(n1 + n2) = (2 × 3R/2 + 2 × 5R/2)/4 = 8R/4 = 2R. Answer (b).
Teacher's Note: Mole-fraction weighted mean of molar heat capacities.
Exam Note: Divide by total moles, not by two.
Question 49. 0.5 mole each of two ideal gases A (Cv,m = 5/2 R) and B (Cv,m = 3R) are taken in a container and expanded reversibly and adiabatically, during this process temperature of gaseous mixture decreased from 350 K to 250 K. Find ΔH (in cal/mol) for the process:
(a) −100 R (b) −137.5 R (c) −375 R (d) None of these
Solution. Cp = Cv + R: A = 7R/2, B = 4R.
ΔH = (nACp,A + nBCp,B)ΔT = (0.5 × 3.5R + 0.5 × 4R)(−100) = 3.75R × (−100) = −375R. Answer (c).
Teacher's Note: ΔH = nCpΔT for ideal gases, adding contributions from each component.
Exam Note: Convert Cv to Cp before using ΔH.
Question 50. A cyclic process ABCD is shown in P–V diagram for an ideal gas. Which of the following diagram represents the same process?
Figure (not redrawn): a cyclic process ABCD on a P–V diagram (A and B at the top, a curved fall to C, C to D below) for an ideal gas, followed by four candidate V–T diagrams labelled (a), (b), (c), (d), each a closed loop with its corners marked A, B, C, D in a different order.
(a) first V–T diagram (b) second V–T diagram (c) third V–T diagram (d) fourth V–T diagram
Solution. Answer (from key): (c). The given P–V cycle must be translated to V–T using V ∝ T at constant P (straight line through the origin) and V = constant ⇒ vertical line; the third V–T diagram matches the sequence of steps. (The V–T option diagrams are not redrawn here; see note.)
Teacher's Note: Convert each P–V step to V–T: isobar is a line through origin, isotherm is vertical, isochore is horizontal.
Exam Note: Track each leg: direction of V and T changes.
Question 51. 36 mL of pure water takes 100 sec to evaporate from a vessel and heater connected to an electric source which delivers 806 watt. The ΔHvaporization of H2O is:
(a) 40.3 kJ/mol (b) 43.2 kJ/mol (c) 4.03 kJ/mol (d) None of these
Solution. Heat supplied = 806 W × 100 s = 80600 J for 36 g = 2 mol of water.
ΔHvap = 80600/2 = 40300 J/mol = 40.3 kJ/mol. Answer (a).
Teacher's Note: Power × time gives energy; divide by moles (36 mL water = 2 mol).
Exam Note: 1 W = 1 J/s.
Question 52. For the reaction: PCl5(g) → PCl3(g) + Cl2(g):
(a) ΔH = ΔE (b) ΔH > ΔE (c) ΔH < ΔE (d) None of the above
Solution. ΔH = ΔE + ΔngRT with Δng = 2 − 1 = +1, so ΔH = ΔE + RT > ΔE. Answer (b).
Teacher's Note: Sign of ΔH − ΔE is the sign of Δng.
Exam Note: Gas moles increase, so ΔH exceeds ΔE.
Question 53. Consider the reaction at 300 K: H2(g) + Cl2(g) → 2HCl(g); ΔH° = −185 kJ. If 2 mole of H2 completely react with 2 mole of Cl2 to form HCl. What is ΔU° for this reaction?
(a) 0 (b) −185 (c) 370 (d) None of these
Solution. Δng = 0, so ΔU° = ΔH°. For 2 mol of each reactant the reaction is doubled: ΔU° = 2 × (−185) = −370 kJ, which is not listed. Answer (d).
Teacher's Note: Δng = 0 gives ΔU = ΔH; scale the enthalpy by the number of moles reacting.
Exam Note: Check how many moles of reaction occur.
Question 54. Which of the indicated relationship is correct for the following exothermic reaction carried out at constant pressure?
CO(g) + 3H2(g) → CH4(g) + H2O(g)
(a) ΔE = ΔH (b) ΔE > ΔH (c) w < 0 (d) q > 0
Solution. Δng = 2 − 4 = −2, so ΔE = ΔH − ΔngRT = ΔH + 2RT, hence ΔE > ΔH. The system contracts (w > 0) and heat is evolved (q < 0). Answer (b).
Teacher's Note: Gas moles decrease: ΔE = ΔH + 2RT, so ΔE is less negative than ΔH.
Exam Note: Compare carefully; exothermic means q < 0.
Question 55. One mole of an ideal gas undergoes a change of state (2.0 atm, 3.0 L) to (2.0 atm, 7.0 L) with a change in internal energy (ΔU) = 30 L-atm. The change in enthalpy (ΔH) of the process in L-atm:
(a) 22 (b) 38 (c) 25 (d) None of these
Solution. ΔH = ΔU + Δ(PV) = 30 + (2.0 × 7.0 − 2.0 × 3.0) = 30 + 8 = 38 L·atm. Answer (b).
Teacher's Note: ΔH = ΔU + Δ(PV); pressure is constant here so Δ(PV) = PΔV.
Exam Note: Use final minus initial PV.
Question 56. What is the change in internal energy when a gas contracts from 377 mL to 177 mL under a constant pressure of 1520 torr, while at the same time being cooled by removing 124 J heat?
(a) 40.52 J (b) −83.48 J (c) −248 J (d) None of these
Solution. P = 1520 torr = 2 atm; ΔV = −0.200 L; w = −PΔV = +0.400 L·atm = +40.52 J.
ΔU = q + w = −124 + 40.52 = −83.48 J. Answer (b).
Teacher's Note: Compression gives positive work on the gas; cooling gives negative q.
Exam Note: Convert torr to atm, then L·atm to J.
Question 57. For the real gases reaction 2CO(g) + O2(g) → 2CO2(g); ΔH = −560 kJ. In 10 litre rigid vessel at 500 K the initial pressure is 70 bar and after the reaction it becomes 40 bar. The change in internal energy is:
(a) −557 kJ (b) −530 kJ (c) −563 kJ (d) None of these
Solution. ΔH = ΔU + VΔP (constant volume, real gases). VΔP = 10 L × (40 − 70) bar = −300 bar·L = −30 kJ.
ΔU = ΔH − VΔP = −560 − (−30) = −530 kJ. Answer (b).
Teacher's Note: For real gases in a rigid vessel use ΔH = ΔU + VΔP, not ΔngRT.
Exam Note: 1 bar·L = 0.1 kJ.
Question 58. One mole of a non-ideal gas undergoes a change of state from (1.0 atm, 3.0 L, 200 K) to (4.0 atm, 5.0 L, 250 K) with a change in internal energy (ΔU) = 40 L-atm. The change in enthalpy of the process in L-atm:
(a) 43 (b) 57 (c) 42 (d) None of these
Solution. ΔH = ΔU + Δ(PV) = 40 + (4.0 × 5.0 − 1.0 × 3.0) = 40 + 17 = 57 L·atm. Answer (b).
Teacher's Note: When P and V both change, Δ(PV) = P2V2 − P1V1, not PΔV.
Exam Note: Non-ideal gas: do not use nRΔT.
Question 59. Consider the reaction at 300 K: C6H6(l) + 15/2 O2(g) → 6CO2(g) + 3H2O(l); ΔH = −3271 kJ. What is ΔU for the combustion of 1.5 mole of benzene at 27°C?
(a) −3267.25 (b) −4900.88 kJ (c) −4906.5 kJ (d) −3274.75 kJ
Solution. Δng = 6 − 7.5 = −1.5. Per mole: ΔU = ΔH − ΔngRT = −3271 + 1.5 × 8.314 × 300/1000 = −3267.26 kJ.
For 1.5 mol: −3267.26 × 1.5 = −4900.9 kJ. Answer (b).
Teacher's Note: ΔU = ΔH − ΔngRT per mole of reaction; then scale by moles burnt.
Exam Note: Water is liquid, so exclude it from Δng.
Question 60. For the reaction FeCO3(s) → FeO(s) + CO2(g); ΔH = 82.8 kJ at 25°C, what is (ΔE or ΔU) at 25°C?
(a) 82.8 kJ (b) 80.32 kJ (c) −2394.77 kJ (d) 85.28 kJ
Solution. Δng = +1. ΔU = ΔH − ΔngRT = 82.8 − 8.314 × 298/1000 = 82.8 − 2.48 = 80.32 kJ. Answer (b).
Teacher's Note: Only CO2(g) counts in Δng; ΔU is slightly smaller than ΔH.
Exam Note: Convert RT to kJ before subtracting.
Question 61. At 5 × 105 bar pressure density of diamond and graphite are 3 g/cc and 2 g/cc respectively, at certain temperature 'T'. Find the value of ΔU − ΔH for the conversion of 1 mole of graphite to 1 mole of diamond at temperature 'T':
(a) 100 kJ/mol (b) 50 kJ/mol (c) −100 kJ/mol (d) None of these
Solution. Vm(diamond) = 12/3 = 4 mL; Vm(graphite) = 12/2 = 6 mL; ΔV = −2 × 10−6 m³.
ΔH − ΔU = PΔV = 5 × 1010 Pa × (−2 × 10−6 m³) = −100 kJ/mol, so ΔU − ΔH = +100 kJ/mol. Answer (a).
Teacher's Note: ΔH − ΔU = PΔV for solids; at very high pressure this term is large.
Exam Note: 5 × 105 bar = 5 × 1010 Pa.
Question 62. Predict which of the following reaction(s) has a positive entropy change?
I. Ag+(aq) + Cl−(aq) → AgCl(s) II. NH4Cl(s) → NH3(g) + HCl(g) III. 2NH3(g) → N2(g) + 3H2(g)
(a) I and II (b) III (c) II and III (d) II
Solution. Entropy rises when Δng > 0. II: solid gives 2 mol gas (+). III: 2 mol gas gives 4 mol (+). I: ions in solution form a solid (−). Answer (c) II and III.
Teacher's Note: More gas moles mean more disorder, so ΔS > 0; ions precipitating lose entropy.
Exam Note: Look at the change in number of gas moles.
Question 63. Predict which of the following reaction(s) has a negative entropy change?
I. CH4(g) + 2O2(g) → CO2(g) + 2H2O(l) II. NH3(g) + HCl(g) → NH4Cl(s) III. 2KClO4(s) → 2KClO3(s) + O2(g)
(a) III (b) II (c) I and II (d) I
Solution. I: 3 mol gas → 1 mol gas plus liquid (ΔS < 0). II: 2 mol gas → solid (ΔS < 0). III: a gas is released from solids (ΔS > 0). Answer (c) I and II.
Teacher's Note: Fewer moles of gas on the product side means decreased entropy.
Exam Note: Condensing a gas to liquid or solid lowers entropy.
Question 64. Which of the following reactions is associated with the most negative change in entropy?
(a) 2SO2(g) + O2(g) → 2SO3(g) (b) C2H4(g) + H2(g) → C2H6(g) (c) C(s, graphite) + O2(g) → CO2(g) (d) 3C2H2(g) → C6H6(l)
Solution. In (a) Δng = −1, in (b) −1, in (c) 0, in (d) three moles of gas become a liquid (Δng = −3 and a phase change to liquid). Entropy falls most in (d).
Teacher's Note: Largest loss of gas moles, plus gas to liquid, gives the most negative ΔS.
Exam Note: Compare Δng across all four reactions.
Question 65. When two mole of an ideal gas (Cp,m = 5/2 R) heated from 300 K to 600 K at constant pressure. The change in entropy of gas (ΔS) is:
(a) (3/2)R ln 2 (b) −(3/2)R ln 2 (c) 5R ln 2 (d) (5/2)R ln 2
Solution. ΔS = nCp,m ln(T2/T1) = 2 × (5/2)R × ln(600/300) = 5R ln 2. Answer (c).
Teacher's Note: Isobaric heating: ΔS = nCp ln(T2/T1).
Exam Note: Do not forget n = 2.
Question 66. Which of the following expression for an irreversible process:
(a) dS > dq/T (b) dS = dq/T (c) dS < dq/T (d) dS = dU/T
Solution. For an irreversible process the Clausius inequality gives dS > dq/T; equality holds only for a reversible process. Answer (a).
Teacher's Note: Entropy change exceeds dq/T when the process is irreversible.
Exam Note: Equality is for reversible paths only.
Question 67. Which of the following expressions is known as Clausius inequality?
(a) ∮ dq/T ≤ 0 (b) ∮ dS/T = 0 (c) ∮ (T/dq) ≮ 0 (d) ∮ dq/T ≥ 0
Solution. The Clausius inequality for a cyclic process is ∮ dq/T ≤ 0 (equality for reversible cycles). Answer (a).
Teacher's Note: Around any cycle ∮dq/T ≤ 0; zero only if reversible.
Exam Note: Remember the direction of the inequality.
Question 68. In problem 65, calculate ΔSgas if process is carried out at constant volume:
(a) 5R ln 2 (b) (3/2)R ln 2 (c) 3R ln 2 (d) −3R ln 2
Solution. Cv,m = Cp,m − R = 3R/2. ΔS = nCv,m ln(T2/T1) = 2 × (3/2)R × ln 2 = 3R ln 2. Answer (c).
Teacher's Note: Isochoric heating: ΔS = nCv ln(T2/T1) with Cv = Cp − R.
Exam Note: Use Cv,m, not Cp,m.
Question 69. If one mole of an ideal gas (Cp,m = 5/2 R) is expanded isothermally at 300 K until it's volume is tripled, then change in entropy of gas is:
(a) zero (b) infinity (c) (5/2)R ln 3 (d) R ln 3
Solution. Isothermal: ΔS = nR ln(V2/V1) = R ln 3. Answer (d).
Teacher's Note: Isothermal ideal gas: ΔS = nR ln(V2/V1); Cp is not needed.
Exam Note: Cp is a distractor here.
Question 70. In previous problem if expansion is carried out freely (Pext = 0), then ΔS is:
(a) zero (b) infinity (c) R ln 3 (d) None
Solution. Entropy is a state function, so ΔS depends only on initial and final states and is the same as for the reversible path: R ln 3. Answer (c).
Teacher's Note: State function: same initial and final states give same ΔS, reversible or not.
Exam Note: Irreversibility shows up in ΔSsurr, not ΔSsys.
Question 71. When one mole of an ideal gas is compressed to half of its initial volume and simultaneously heated to twice its initial temperature, the change in entropy of gas (ΔS) is:
(a) Cp,m ln 2 (b) Cv,m ln 2 (c) R ln 2 (d) (Cv,m − R) ln 2
Solution. ΔS = Cv,m ln(T2/T1) + R ln(V2/V1) = Cv,m ln 2 + R ln(1/2) = (Cv,m − R) ln 2. Answer (d).
Teacher's Note: Use ΔS = nCv ln(T2/T1) + nR ln(V2/V1); the volume term is negative.
Exam Note: Both T and V terms contribute with opposite signs.
Question 72. What is the change in entropy when 2.5 mole of water is heated from 27°C to 87°C? Assume that the heat capacity is constant. (Cp,m(H2O) = 4.2 J/g-K, ln(1.2) = 0.18)
(a) 16.6 J/K (b) 9 J/K (c) 34.02 J/K (d) 1.89 J/K
Solution. Mass = 2.5 × 18 = 45 g; T2/T1 = 360/300 = 1.2.
ΔS = m c ln(T2/T1) = 45 × 4.2 × 0.18 = 34.02 J/K. Answer (c).
Teacher's Note: Heat capacity is per gram here: convert moles to grams (18 g/mol).
Exam Note: Use kelvin in the ratio, not °C.
Question 73. Calculate standard entropy change in the reaction Fe2O3(s) + 3H2(g) → 2Fe(s) + 3H2O(l). Given: S°m(Fe2O3, s) = 87.4, S°m(Fe, s) = 27.3, S°m(H2, g) = 130.7, S°m(H2O, l) = 69.9 J K−1 mol−1
(a) −212.5 J K−1 mol−1 (b) −215.2 J K−1 mol−1 (c) −120.9 J K−1 mol−1 (d) None of these
Solution. ΔrS° = ΣνS°(products) − ΣνS°(reactants) = (2 × 27.3 + 3 × 69.9) − (87.4 + 3 × 130.7) = 264.3 − 479.5 = −215.2 J K−1 mol−1. Answer (b).
Teacher's Note: Products minus reactants, each multiplied by its stoichiometric coefficient.
Exam Note: Remember coefficients 2 and 3.
Question 74. Calculate the entropy change (J/mol K) of the given reaction. The molar entropies [J/K-mol] are given in brackets after each substance. 2PbS(s) [91.2] + 3O2(g) [205.1] → 2PbO(s) [66.5] + 2SO2(g) [248.2]
(a) −113.5 (b) −168.3 (c) +72.5 (d) −149.2
Solution. ΔrS° = (2 × 66.5 + 2 × 248.2) − (2 × 91.2 + 3 × 205.1) = 629.4 − 797.7 = −168.3 J/K·mol. Answer (b).
Teacher's Note: Three gas moles on the left, two on the right: expect a negative ΔS.
Exam Note: Use stoichiometric coefficients in the sum.
Question 75. Given ΔrS° = −266 and the listed [S°m values] calculate S° for Fe3O4(s): 4Fe3O4(s) [......] + O2(g) [205] → 6Fe2O3(s) [87]
(a) +111.1 (b) +122.4 (c) 145.75 (d) 248.25
Solution. ΔrS° = 6 × 87 − (4S° + 205) = −266 → 522 − 205 + 266 = 4S° → 4S° = 583 → S° = 145.75 J/K·mol. Answer (c).
Teacher's Note: Rearrange ΔrS° = products − reactants for the unknown S°.
Exam Note: Do not forget the coefficient 4 on Fe3O4.
Question 76. The entropy change for a phase transformation is:
(a) −ΔU/(γ + dT) (b) ΔT/ΔH (c) ΔH/T (d) (ΔH + ΔG)/T
Solution. At the transition temperature the two phases are in equilibrium, so ΔG = 0 and ΔS = ΔH/T. Answer (c).
Teacher's Note: Phase change at equilibrium: ΔG = 0, so ΔS = ΔH/Ttransition.
Exam Note: Use transition temperature in kelvin.
Question 77. What is the melting point of benzene if ΔHfusion = 9.95 kJ/mol and ΔSfusion = 35.7 J/K-mol?
(a) 278.7°C (b) 278.7 K (c) 300 K (d) 298 K
Solution. At the melting point ΔG = 0: T = ΔH/ΔS = 9950/35.7 = 278.7 K. Answer (b).
Teacher's Note: Tm = ΔHfus/ΔSfus; convert kJ to J.
Exam Note: Result is in kelvin (about 5.5°C).
Question 78. ΔS for freezing of 10 g of H2O(l) (enthalpy of fusion is 80 cal/g) at 0°C and 1 atm is:
(a) 12.25 J/K (b) −0.244 J/K (c) −2.93 J/K (d) −12.25 J/K
Solution. q = 10 × 80 = 800 cal released. ΔS = −q/T = −800/273 = −2.93 cal/K = −2.93 × 4.18 ≈ −12.25 J/K. Answer (d).
Teacher's Note: Freezing releases heat, so ΔS is negative; convert cal to J.
Exam Note: 1 cal = 4.18 J.
Question 79. Chloroform has ΔHvaporization = 29.2 kJ/mol and boils at 61.2°C. What is the value of ΔSvaporization for chloroform?
(a) 87.3 J/mol-K (b) 477.1 J/mol-K (c) −87.3 J/mol-K (d) −477.1 J/mol-K
Solution. ΔSvap = ΔHvap/Tb = 29200/(273 + 61.2) = 29200/334.2 = 87.4 ≈ 87.3 J/mol·K. Answer (a).
Teacher's Note: Use boiling point in kelvin; vaporization has positive entropy change.
Exam Note: Trouton's rule: about 88 J/mol·K.
Question 80. The entropy of vaporization of benzene is 85 JK−1 mol−1. When 117 g benzene vaporizes at it's normal boiling point, the entropy change of surrounding is:
(a) −85 JK−1 (b) −85 × 1.5 JK−1 (c) 85 × 1.5 JK−1 (d) None of these
Solution. n = 117/78 = 1.5 mol. ΔSsystem = 1.5 × 85 J/K. At the boiling point the process is reversible, so ΔSsurr = −ΔSsystem = −85 × 1.5 J/K. Answer (b).
Teacher's Note: Reversible phase change: ΔSuniverse = 0, so ΔSsurr = −ΔSsys.
Exam Note: Molar mass of benzene is 78 g/mol.
Question 81. Identify the correct statement regarding entropy
(a) At absolute zero temperature, the entropy of perfectly crystalline substances is +ve (b) At absolute zero temperature entropy of perfectly crystalline substance is taken to be zero (c) At 0°C the entropy of a perfectly crystalline substance is taken to be zero (d) At absolute zero temperature, the entropy of all crystalline substances is taken to be zero
Solution. Third law: the entropy of a perfectly crystalline substance is zero at absolute zero. Only (b) states this correctly; (d) is wrong because imperfect crystals keep residual entropy.
Teacher's Note: Third law applies to perfect crystals only, at 0 K.
Exam Note: Both words 'perfect' and 'absolute zero' are needed.
Question 82. Calculate ΔS for following process: X(s) → X(l) (from 100 K to 200 K). Given: Melting point of X(s) = 100 K; ΔHfusion = 20 kJ/mol; Cp,m(X, l) = 10 J/mol·K
(a) 26.93 J/K (b) 206.93 J/K (c) 203 J/K (d) 206.93 kJ/K
Solution. Step 1, melting at 100 K: ΔS = 20000/100 = 200 J/K. Step 2, heating liquid 100 K to 200 K: ΔS = 10 ln(200/100) = 6.93 J/K.
Total = 206.93 J/K. Answer (b).
Teacher's Note: Add the entropy of the phase change and the entropy of heating the liquid.
Exam Note: Do not use kJ in the final unit.
Question 83. For a perfectly crystalline solid Cp,m = aT³, where a is constant. If Cp,m is 0.42 J/K mol at 10 K, molar entropy at 20 K is:
(a) 0.42 J/K mol (b) 0.14 J/K mol (c) 1.12 J/K mol (d) zero
Solution. a = 0.42/103 = 0.42 × 10−3. Sm = ∫020 (Cp/T) dT = ∫020 aT² dT = a × 20³/3 = 0.42 × 10−3 × 8000/3 = 1.12 J/K·mol. Answer (c).
Teacher's Note: Third-law entropy: integrate Cp/T from 0 K (Debye T³ law).
Exam Note: S(0) = 0 for perfect crystal.
Question 84. Consider the following spontaneous reaction 3X2(g) → 2X3(g). What are the sign of ΔH, ΔS and ΔG for the reaction?
(a) +ve, +ve, +ve (b) +ve, −ve, −ve (c) −ve, +ve, −ve (d) −ve, −ve, −ve
Solution. Spontaneous means ΔG < 0. Gas moles decrease (3 → 2), so ΔS < 0. For ΔG = ΔH − TΔS to be negative with −TΔS positive, ΔH must be negative. Answer (d).
Teacher's Note: Fewer gas moles give ΔS < 0; spontaneity then needs ΔH < 0.
Exam Note: Deduce ΔS first, then ΔH.
Question 85. For the reaction 2H(g) → H2(g), the sign of ΔH and ΔS respectively are:
(a) +, − (b) +, + (c) −, + (d) −, −
Solution. Bond formation releases energy (ΔH < 0) and two moles of gas become one (ΔS < 0). Answer (d).
Teacher's Note: Forming a bond is exothermic; gas moles fall so entropy falls.
Exam Note: Bond making releases energy.
Question 86. Consider the following reaction. C6H6(l) + 15/2 O2(g) → 6CO2(g) + 3H2O(g): signs of ΔH, ΔS and ΔG for the above reaction will be:
(a) +, −, + (b) −, +, − (c) −, +, + (d) +, +, −
Solution. Combustion is exothermic (ΔH < 0). Gas moles increase from 7.5 to 9 and a liquid becomes gas, so ΔS > 0. Hence ΔG = ΔH − TΔS < 0. Answer (b) −, +, −.
Teacher's Note: Combustion: ΔH negative; products have more gas moles, ΔS positive; so ΔG negative.
Exam Note: Note H2O is a gas here.
Question 87. Consider the following reaction at temperature T: CH2=CH2(g) + Cl2(g) → ClCH2CH2Cl(g); ΔrH° = −217.5 kJ/mol, ΔrS° = −233.9 J/K-mol. Reaction is supported by:
(a) entropy (b) enthalpy (c) both (a) & (b) (d) neither
Solution. ΔH° < 0 favours spontaneity, while ΔS° < 0 (−TΔS° > 0) opposes it. The reaction is supported by enthalpy. Answer (b).
Teacher's Note: Negative ΔH favours the reaction; negative ΔS opposes it.
Exam Note: Judge ΔH and ΔS separately.
Question 88. For a process to be spontaneous at constant T and P:
(a) (ΔG)system must be negative (b) (ΔG)system must be positive (c) (ΔS)system must be positive (d) (ΔS)system must be negative
Solution. At constant T and P the criterion is (ΔG)system < 0; the sign of ΔSsystem alone does not decide spontaneity. Answer (a).
Teacher's Note: Constant T and P: spontaneity means ΔG < 0.
Exam Note: ΔSsys alone is not the criterion.
Question 89. For a reaction to occur spontaneously:
(a) ΔS must be negative (b) (−ΔH + TΔS) must be positive (c) ΔH + TΔS must be negative (d) ΔH must be negative
Solution. Spontaneous: ΔG = ΔH − TΔS < 0, equivalent to (−ΔH + TΔS) > 0. Answer (b).
Teacher's Note: ΔG < 0 rewritten as −ΔH + TΔS > 0.
Exam Note: The sign of TΔS is opposite to that in option (c).
Question 90. Which of the following conditions regarding a chemical process ensures its spontaneity at all temperature?
(a) ΔH > 0, ΔG < 0 (b) ΔH < 0, ΔS > 0 (c) ΔH < 0, ΔS < 0 (d) ΔH > 0, ΔS < 0
Solution. With ΔH < 0 and ΔS > 0, ΔG = ΔH − TΔS is negative at every temperature. Answer (b).
Teacher's Note: Exothermic with entropy increase is spontaneous at all temperatures.
Exam Note: Other sign combinations depend on T.
Question 91. The free energy change ΔG = 0, when:
(a) the system is at equilibrium (b) catalyst is added (c) reactants are initially mixed thoroughly (d) the reactants are completely consumed
Solution. At constant T and P, ΔG = 0 at equilibrium (no net driving force). A catalyst changes rate only. Answer (a).
Teacher's Note: ΔG = 0 is the equilibrium condition; a catalyst does not change ΔG.
Exam Note: Do not confuse ΔG with ΔG°.
Question 92. Which of the following conditions will always lead to a non-spontaneous change?
(a) ΔH and ΔS both +ve (b) ΔH is −ve and ΔS is +ve (c) ΔH and ΔS both −ve (d) ΔH is +ve and ΔS is −ve
Solution. If ΔH > 0 and ΔS < 0, then ΔG = ΔH − TΔS is positive at every temperature, so the change is never spontaneous. Answer (d).
Teacher's Note: Endothermic and entropy-decreasing: ΔG positive at all temperatures.
Exam Note: Compare with option (b), always spontaneous.
Question 93. Suppose that a reaction has ΔH = −40 kJ and ΔS = −50 J/K. At what temperature range will it change from spontaneous to non-spontaneous?
(a) 0.8 K to 1 K (b) 799 K to 800 K (c) 800 K to 801 K (d) 799 K to 801 K
Solution. The crossover is at ΔG = 0: T = ΔH/ΔS = −40000/−50 = 800 K. Below 800 K ΔG < 0 (spontaneous); above 800 K ΔG > 0. The change therefore occurs within 799 K to 801 K, which brackets 800 K. Answer (d).
Teacher's Note: Crossover temperature T = ΔH/ΔS; both negative, so reaction is spontaneous below it.
Exam Note: The range must contain 800 K.
Question 94. For isothermal expansion in case of an ideal gas:
(a) ΔG = ΔS (b) ΔG = ΔH (c) ΔG = −T·ΔS (d) None of these
Solution. For an isothermal change of an ideal gas ΔH = 0, so ΔG = ΔH − TΔS = −TΔS. Answer (c).
Teacher's Note: Ideal gas isothermal: ΔU = ΔH = 0, so ΔG = −TΔS.
Exam Note: ΔG = −nRT ln(V2/V1).
Question 95. What is the normal boiling point of mercury? Given: ΔHf°(Hg, l) = 0; S°(Hg, l) = 77.4 J/K-mol; ΔHf°(Hg, g) = 60.8 kJ/mol; S°(Hg, g) = 174.4 J/K-mol
(a) 624.8 K (b) 626.8 K (c) 636.8 K (d) None of these
Solution. Hg(l) ⇌ Hg(g): ΔrH° = 60.8 kJ/mol; ΔrS° = 174.4 − 77.4 = 97 J/K·mol.
At the boiling point ΔG = 0: T = 60800/97 = 626.8 K. Answer (b).
Teacher's Note: Boiling point: ΔG = 0 so T = ΔH/ΔS for vaporization.
Exam Note: Convert kJ to J before dividing.
Question 96. 18 gm of ice is converted into water at 0°C and 1 atm. The entropies of H2O(s) and H2O(l) are 38.2 and 60 J/mol K respectively. The enthalpy change for this conversion is:
(a) 5951.4 J/mol (b) 595.14 J/mol (c) −5951.4 J/mol (d) None of these
Solution. At 0°C ice and water are in equilibrium, ΔG = 0 so ΔH = TΔS = 273 × (60 − 38.2) = 273 × 21.8 = 5951.4 J/mol. Answer (a).
Teacher's Note: At the melting point ΔG = 0, so ΔH = TΔSfus.
Exam Note: 18 g is exactly one mole of water.
Question 97. Using the listed [ΔG°f values] calculate ΔG° for the reaction: 3H2S(g) [−33.6] + 2HNO3(l) [−80.6] → 2NO(g) [+86.6] + 4H2O(l) [−237.1] + 3S(s) [0.0]
(a) −513.0 (b) −1037.0 (c) +433.4 (d) +225.0
Solution. ΔG° = [2(86.6) + 4(−237.1) + 0] − [3(−33.6) + 2(−80.6)] = (173.2 − 948.4) − (−100.8 − 161.2) = −775.2 + 262.0 = −513.2 ≈ −513.0 kJ. Answer (a).
Teacher's Note: ΔrG° = Σν ΔGf°(products) − Σν ΔGf°(reactants); elements in standard state are zero.
Exam Note: Multiply each ΔGf° by its coefficient.
| ΔH° (kJ) | ΔS° (J/K) | |
|---|---|---|
| I. | +10.5 | +30 |
| II. | +1.8 | −113 |
| III. | −126 | +84 |
(a) III (b) I (c) II and III (d) I and II
Solution. ΔG° = ΔH° − TΔS° at 298 K: I: 10.5 − 298 × 0.030 = +1.56 kJ (non-spontaneous). II: 1.8 + 298 × 0.113 = +35.5 kJ (non-spontaneous). III: −126 − 298 × 0.084 = −151 kJ (spontaneous). Answer (a) III.
Teacher's Note: Only III has ΔH < 0 and ΔS > 0, hence ΔG < 0 at all T; check others numerically.
Exam Note: Convert ΔS to kJ/K before computing TΔS.
Question 99. Calculate ΔHf° for UBr4 from the ΔG° of reaction and the S° values. U(s) + 2Br2(l) → UBr4(s); ΔG° = −788.6 kJ; S° (J/K-mol) 50.3, 152.3, 242.6
(a) −822.1 kJ/mol (b) −841.2 kJ/mol (c) −775.6 kJ/mol (d) −804.3 kJ/mol
Solution. ΔS° = 242.6 − (50.3 + 2 × 152.3) = −112.3 J/K. ΔH° = ΔG° + TΔS° = −788.6 + 298 × (−0.1123) = −788.6 − 33.5 = −822.1 kJ/mol. Answer (a).
Teacher's Note: ΔH° = ΔG° + TΔS°; first find ΔS° from S° values with coefficient 2 for Br2.
Exam Note: Take T = 298 K; convert J to kJ.
Question 100. The entropies of H2(g) and H(g) are 130.6 and 114.6 J mol−1 K−1 respectively at 298 K. Using the data given below calculate the bond energy of H2 (in kJ/mol): H2(g) → 2H(g); ΔG° = 406.6 kJ
(a) 377.2 (b) 436.0 (c) 425.5 (d) 430.5
Solution. ΔS° = 2 × 114.6 − 130.6 = 98.6 J/K. ΔH° = ΔG° + TΔS° = 406.6 + 298 × 0.0986 = 406.6 + 29.4 = 436.0 kJ/mol, which is the bond energy of H–H. Answer (b).
Teacher's Note: Bond dissociation enthalpy equals ΔH° of H2 → 2H; get it from ΔG° + TΔS°.
Exam Note: Remember two H atoms are formed.
Question 101. Consider the ΔGf° and ΔHf° (kJ/mol) for the following oxides. Which oxide can be most easily decomposed to form the metal and oxygen gas?
(a) ZnO (ΔG° = −318.4, ΔH° = −348.3) (b) Cu2O (ΔG° = −146.0, ΔH° = −168.8) (c) HgO (ΔG° = −58.5, ΔH° = −90.8) (d) PbO (ΔG° = −187.9, ΔH° = −217.3)
Solution. Decomposition has ΔG° = −ΔGf°. The smallest positive value is for HgO (+58.5 kJ), so it decomposes most easily. Answer (c).
Teacher's Note: The oxide with the least negative ΔGf° is the least stable and decomposes most easily.
Exam Note: Compare ΔGf°, not ΔHf°.
Question 102. Which of the following option is correct?
(a) [∂ ln Kp/∂T] = ΔH°/RT² (b) ∂ ln K/∂T = Ea/RT² (c) [∂ ln Kp/∂T] = ΔU/RT² (d) All of these
Solution. Answer (from key): (d). (a) is the van't Hoff equation and (b) is the Arrhenius equation (for the rate constant). Note for checking: strictly, the ΔU form in (c) holds for Kc (Kp goes with ΔH°), so the printed option (c) is loosely worded; the book's key accepts (d).
Teacher's Note: van't Hoff: Kp with ΔH°; Kc with ΔU; Arrhenius: k with Ea.
Exam Note: Know which equilibrium constant pairs with ΔH and ΔU.
Question 103. Calculate ΔG° (kJ/mol) at 127°C for a reaction with Kequilibrium = 105:
(a) −38.294 (b) −16.628 (c) −9.16 (d) None of these
Solution. ΔG° = −2.303 RT log K = −2.303 × 8.314 × 400 × 5 = −38294 J = −38.294 kJ/mol. Answer (a).
Teacher's Note: ΔG° = −2.303 RT log K; large K gives large negative ΔG°.
Exam Note: T = 127 + 273 = 400 K.
Question 104. When reaction is carried out at standard states then at the equilibrium:
(a) ΔH° = 0 (b) ΔS° = 0 (c) equilibrium constant K = 0 (d) equilibrium constant K = 1
Solution. Equilibrium at standard states means Q = 1 and ΔG = 0 = ΔG° + RT ln Q = ΔG°, so ΔG° = 0 and K = e0 = 1. Answer (d).
Teacher's Note: ΔG° = −RT ln K, so ΔG° = 0 corresponds to K = 1.
Exam Note: ΔH° and ΔS° need not be zero.
Question 105. At 25°C, ΔG° for the process H2O(l) ⇌ H2O(g) is 8.6 kJ. The vapour pressure of water at this temperature, is nearly:
(a) 24 torr (b) 285 torr (c) 32.17 torr (d) 100 torr
Solution. ΔG° = −RT ln K with K = P(H2O)/1 bar: ln K = −8600/(8.314 × 298) = −3.47 → K = 0.0311 bar = 0.0311 × 760 ≈ 24 torr. Answer (a).
Teacher's Note: For liquid ⇌ vapour, Kp equals the vapour pressure in bar.
Exam Note: 1 bar ≈ 760 torr.
Question 106. For the auto-ionization of water at 25°C, H2O(l) ⇌ H+(aq) + OH−(aq) equilibrium constant is 10−14. What is ΔG° for the process?
(a) ≈ 8 × 104 J (b) ≈ 3.5 × 104 J (c) ≈ 104 J (d) None of these
Solution. ΔG° = −RT ln Kw = −2.303 × 8.314 × 298 × (−14) = 79.9 × 10³ J ≈ 8 × 104 J. Answer (a).
Teacher's Note: Very small K means large positive ΔG°; use ΔG° = −2.303RT log K.
Exam Note: log Kw = −14.
Question 107. The molar entropies of HI(g), H(g) and I(g) at 298 K are 206.5, 114.6, and 180.7 J mol−1 K−1 respectively. Using the ΔG° given below, calculate the bond energy of HI. HI(g) → H(g) + I(g); ΔG° = 271.8 kJ
(a) 282.4 (b) 298.3 (c) 290.1 (d) 315.4
Solution. ΔS° = 114.6 + 180.7 − 206.5 = 88.8 J/K. ΔH° = ΔG° + TΔS° = 271.8 + 298 × 0.0888 = 271.8 + 26.5 = 298.3 kJ/mol = bond energy of H–I. Answer (b).
Teacher's Note: Bond energy equals ΔH° of the dissociation, found from ΔG° + TΔS°.
Exam Note: Check the sign of ΔS° (positive, two particles from one).
Question 108. Hess's law states that:
(a) the standard enthalpy of an overall reaction is the sum of the enthalpy changes in individual reactions (b) enthalpy of formation of a compound is same as the enthalpy of decomposition of the compound into constituent elements, but with opposite sign (c) at constant temperature the pressure of a gas is inversely proportional to its volume (d) the mass of a gas dissolved per litre of a solvent is proportional to the pressure of the gas in equilibrium with the solution
Solution. Hess's law: the enthalpy change of the overall reaction equals the sum of the enthalpy changes of the individual steps. (b) is Lavoisier–Laplace law, (c) Boyle's law, (d) Henry's law. Answer (a).
Teacher's Note: Enthalpy is a state function, so the route does not matter, only start and end.
Exam Note: Identify the other options by law name.
Question 109. An imaginary reaction X → Y takes place in three steps: X → A, ΔH = −q1; B → A, ΔH = −q2; B → Y, ΔH = −q3. If Hess' law is applicable, then the heat of the reaction (X → Y) is:
(a) q1 − q2 + q3 (b) q2 − q3 − q1 (c) q1 − q2 − q3 (d) q3 − q2 − q1
Solution. X → A (−q1); A → B is the reverse of B → A (+q2); B → Y (−q3). Sum: ΔH = −q1 + q2 − q3 = q2 − q3 − q1. Answer (b).
Teacher's Note: Reverse a step and its ΔH changes sign; then add all steps.
Exam Note: Build X → A → B → Y.
Question 110. The enthalpy change for a reaction does not depend upon:
(a) the physical states of reactants and products (b) use of different reactants for the same product (c) the number of intermediate reaction steps (d) the differences in initial or final temperatures of involved substances
Solution. ΔH depends on the physical states, the actual reactants and the temperatures, but it is independent of the path or the number of intermediate steps (Hess's law). Answer (c).
Teacher's Note: State function: ΔH is independent of path and number of steps.
Exam Note: Physical states and T do change ΔH.
Question 111. The standard enthalpy of formation of gaseous H2O at 298 K is −241.82 kJ/mol. Calculate ΔH° at 373 K given the following values of the molar heat capacities at constant pressure: H2O(g) = 33.58 JK−1 mol−1; H2(g) = 29.84 JK−1 mol−1; O2(g) = 29.37 JK−1 mol−1. Assume that the heat capacities are independent of temperature:
(a) −242.6 kJ/mol (b) −485.2 kJ/mol (c) −121.3 kJ/mol (d) −286.4 kJ/mol
Solution. For H2 + ½O2 → H2O(g): ΔrCp = 33.58 − 29.84 − ½(29.37) = −10.945 J/K.
Kirchhoff: ΔH373 = ΔH298 + ΔrCp(373 − 298) = −241.82 + (−10.945 × 75)/1000 = −241.82 − 0.82 = −242.6 kJ/mol. Answer (a).
Teacher's Note: Kirchhoff's law: ΔHT2 = ΔHT1 + ΔrCpΔT; include the ½ for O2.
Exam Note: Convert J to kJ for the correction term.
Question 112. Which of the following value of ΔHf° represent that the product is least stable?
(a) −94.0 kcal mol−1 (b) −231.6 kcal mol−1 (c) +21.4 kcal mol−1 (d) +64.8 kcal mol−1
Solution. The more positive the enthalpy of formation, the less stable the compound relative to its elements. The most positive value is +64.8 kcal/mol, so (d).
Teacher's Note: Highly positive ΔHf° means the compound is endothermic and unstable.
Exam Note: Stability follows more negative ΔHf°.
Question 113. For which of the following substances the enthalpy of formation in the standard state is zero?
(a) Sucrose (b) Ethanol (c) Aluminium (d) Calcium chloride
Solution. The standard enthalpy of formation of an element in its stable standard state is zero. Aluminium is an element, the others are compounds. Answer (c).
Teacher's Note: Elements in their standard state have ΔfH° = 0 by convention.
Exam Note: Only elements, not compounds, are zero.
Question 114. Calculate the standard enthalpy of reaction for the following reaction using the listed enthalpies of reaction: 3Co(s) + 2O2(g) → Co3O4(s); 2Co(s) + O2(g) → 2CoO(s), ΔH1° = −475.8 kJ; 6CoO(s) + O2(g) → 2Co3O4(s), ΔH2° = −355.0 kJ
(a) −891.2 kJ (b) −120.8 kJ (c) +891.2 kJ (d) −830.8 kJ
Solution. Target = (3/2) × reaction 1 + (1/2) × reaction 2:
ΔH° = 1.5 × (−475.8) + 0.5 × (−355.0) = −713.7 − 177.5 = −891.2 kJ. Answer (a).
Teacher's Note: Scale the given equations so that CoO cancels, scale ΔH equally.
Exam Note: Check that intermediates cancel.
Question 115. From given following equations and ΔH° values, determine the enthalpy of reaction at 298 K for the reaction: C2H4(g) + 6F2(g) → 2CF4(g) + 4HF(g). H2(g) + F2(g) → 2HF(g), ΔH1° = −537 kJ; C(s) + 2F2(g) → CF4(g), ΔH2° = −680 kJ; 2C(s) + 2H2(g) → C2H4(g), ΔH3° = 52 kJ
(a) −1165 (b) −2486 (c) +1165 (d) +2486
Solution. Target = 2 × (eq 2) + 2 × (eq 1) − (eq 3):
ΔH° = 2(−680) + 2(−537) − 52 = −1360 − 1074 − 52 = −2486 kJ. Answer (b).
Teacher's Note: Reverse eq 3 to remove C2H4 from the product side; double eqs 1 and 2.
Exam Note: Reversing flips the sign of ΔH.
Question 116. Given: C(diamond) + O2 → CO2; ΔH = −395 kJ; C(graphite) + O2 → CO2; ΔH = −393 kJ. The enthalpy of formation of diamond from graphite is:
(a) +2.0 kJ (b) −1.5 kJ (c) −788 kJ (d) 788 kJ
Solution. C(graphite) → C(diamond) = [graphite combustion] − [diamond combustion] = −393 − (−395) = +2.0 kJ. Answer (a).
Teacher's Note: Subtract the two combustion equations to get the allotropic change.
Exam Note: Diamond is slightly less stable than graphite.
Question 117. Which of the following equations represents a reaction that provides the enthalpy of formation of CH3Cl?
(a) C(s) + HCl(g) + H2(g) → CH3Cl(g) (b) C(s) + 3H(g) + Cl(g) → CH3Cl(g) (c) C(s) + 3/2 H2(g) + 1/2 Cl2(g) → CH3Cl(g) (d) CH4(g) + Cl2(g) → CH3Cl(g) + HCl(g)
Solution. Formation reaction: one mole of compound from its elements in their standard states. Only (c) uses C(s), H2(g) and Cl2(g). Answer (c).
Teacher's Note: Formation reaction: elements in standard states form exactly one mole of the compound.
Exam Note: Atoms (H, Cl) or compounds (HCl) do not qualify.
Question 118. Use the given standard enthalpies of formation (in kJ/mol) to determine the enthalpy of reaction of the following reaction: NH3(g) + 3F2(g) → NF3(g) + 3HF(g); ΔHf°(NH3, g) = −46.2; ΔHf°(NF3, g) = −113.0; ΔHf°(HF, g) = −269.0
(a) −335.8 kJ/mol (b) −873.8 kJ/mol (c) −697.2 kJ/mol (d) −890.4 kJ/mol
Solution. ΔH° = [−113.0 + 3(−269.0)] − [−46.2 + 3(0)] = (−113.0 − 807.0) + 46.2 = −873.8 kJ/mol. Answer (b).
Teacher's Note: Products minus reactants; F2 is an element so ΔfH° = 0.
Exam Note: Multiply HF by 3.
Question 119. The standard enthalpy of formation of octane (C8H18) is −250 kJ/mol. Calculate the enthalpy of combustion of C8H18. The enthalpy of formation of CO2(g) and H2O(l) are −394 kJ/mol and −286 kJ/mol respectively:
(a) −5200 kJ/mol (b) −5726 kJ/mol (c) −5476 kJ/mol (d) −5310 kJ/mol
Solution. C8H18 + 25/2 O2 → 8CO2 + 9H2O(l)
ΔcH° = 8(−394) + 9(−286) − (−250) = −3152 − 2574 + 250 = −5476 kJ/mol. Answer (c).
Teacher's Note: Balance the combustion first; then products minus reactants.
Exam Note: 9 H2O and 8 CO2 from C8H18.
Question 120. Determine the enthalpy of formation of B2H6(g) in kJ/mol of the following reaction: B2H6(g) + 3O2(g) → B2O3(s) + 3H2O(g); ΔrH° = −1941 kJ/mol; ΔHf°(B2O3, s) = −1273 kJ/mol; ΔHf°(H2O, g) = −241.8 kJ/mol
(a) −75.6 (b) +75.6 (c) −57.4 (d) −28.4
Solution. ΔrH° = ΔHf(B2O3) + 3ΔHf(H2O) − ΔHf(B2H6)
−1941 = −1273 − 725.4 − x → x = −1998.4 + 1941 = −57.4 kJ/mol. Answer (c).
Teacher's Note: Rearrange the reaction-enthalpy equation for the unknown formation enthalpy.
Exam Note: O2 is an element: zero.
Question 121. Consider the following reactions: C(s) + O2(g) → CO2(g) + x kJ; CO(g) + ½O2(g) → CO2(g) + y kJ. The heat of formation of CO(g) is:
(a) −(x + y) kJ/mol (b) (x − y) kJ/mol (c) (y − x) kJ/mol (d) None of these
Solution. The first reaction has ΔH = −x kJ, the second ΔH = −y kJ. Subtract: C + ½O2 → CO has ΔH = −x − (−y) = (y − x) kJ/mol. Answer (c).
Teacher's Note: Heat evolved is written as +x in the equation, so ΔH = −x; subtract the second equation from the first.
Exam Note: Careful with sign when heat is written on the product side.
Question 122. If ΔfH°(C2H4) and ΔfH°(C2H6) are x1 and x2 kcal mol−1, then heat of hydrogenation of C2H4 is:
(a) x1 + x2 (b) x1 − x2 (c) x2 − x1 (d) x1 + 2x2
Solution. C2H4 + H2 → C2H6: ΔH = ΔfH(C2H6) − ΔfH(C2H4) − 0 = x2 − x1. Answer (c).
Teacher's Note: Products minus reactants; H2 is an element with zero formation enthalpy.
Exam Note: Product first, then subtract reactant.
Question 123. What amount of energy (kJ) is released in the combustion of 5.8 g of C4H10(g)? 2C4H10(g) + 13O2(g) → 8CO2(g) + 10H2O(l); ΔH° = −5756 kJ
(a) 575.6 (b) 287.8 (c) 182 (d) 57.56
Solution. n(C4H10) = 5.8/58 = 0.1 mol. The equation is for 2 mol (−5756 kJ), so per mole −2878 kJ.
Energy released = 0.1 × 2878 = 287.8 kJ. Answer (b).
Teacher's Note: The equation is written for 2 mol; divide by 2 before scaling to 0.1 mol.
Exam Note: Molar mass of butane is 58 g/mol.
Question 124. The enthalpy of the reaction forming PbO according to the following equation is 438 kJ. What heat energy (kJ) is released in formation of 22.3 g PbO(s)? (Atomic weights: Pb = 207, O = 16.0) 2Pb(s) + O2(g) → 2PbO(s)
(a) 21.9 (b) 28.7 (c) 14.6 (d) 34.2
Solution. M(PbO) = 223 g/mol, so 22.3 g = 0.1 mol. The equation gives 438 kJ for 2 mol, i.e. 219 kJ per mole.
Energy = 0.1 × 219 = 21.9 kJ. Answer (a).
Teacher's Note: Per-mole heat is half the equation value (2 mol PbO formed).
Exam Note: Use molar mass 223 g/mol.
Question 125. The fat, C57H104O6(s), is metabolized via the following reaction. Given the enthalpies of formation, calculate the energy (kJ) liberated when 1.0 g of this fat reacts. C57H104O6(s) + 80O2(g) → 57CO2(g) + 52H2O(l); ΔfH°(C57H104O6, s) = −70870 kJ/mol; ΔfH°(H2O, l) = −285.8 kJ/mol; ΔfH°(CO2, g) = −393.5 kJ/mol
(a) −37.98 (b) −40.4 (c) −33.4 (d) −30.2
Solution. M(fat) = 57 × 12 + 104 + 6 × 16 = 884 g/mol. Products: 57(−393.5) + 52(−285.8) = −37291.1 kJ. Magnitude of the enthalpy change = 33578.9 kJ/mol (the book writes −33578.9 kJ/mol), so per gram = 33578.9/884 = 37.98 kJ g−1 liberated. Answer (from key): (a) −37.98. Note for checking: with the formation enthalpy printed as −70870 kJ/mol, the strict ΔrH° = Σproducts − reactant = +33579 kJ/mol; the book takes the magnitude as the energy liberated.
Teacher's Note: Liberated energy per gram = |ΔrH°| / molar mass of the fat.
Exam Note: Compute the molar mass (884 g/mol) first.
Question 126. The heat of formation of NH3(g) is −46 kJ mol−1. The ΔH (in kJ mol−1) of the reaction, 2NH3(g) → N2(g) + 3H2(g) is:
(a) 46 (b) −46 (c) 92 (d) −92
Solution. The reaction is the reverse of forming 2 mol NH3: ΔH = −2 × (−46) = +92 kJ/mol. Answer (c).
Teacher's Note: Decomposition of 2 mol is the reverse of formation of 2 mol: flip the sign and double.
Exam Note: Coefficient 2 doubles the value.
Question 127. Consider the following reaction: H2O(l) → H2O(g); ΔH1 = 44 kJ; 2CH3OH(l) + 3O2(g) → 4H2O(l) + 2CO2(g); ΔH2 = −1453 kJ. What is the value of ΔH for second reaction if water vapour instead of liquid water is formed as product?
(a) −1409 kJ (b) −1629 kJ (c) −1277 kJ (d) None of these
Solution. Add 4 × (H2O(l) → H2O(g)) to the second reaction: ΔH = −1453 + 4 × 44 = −1453 + 176 = −1277 kJ. Answer (c).
Teacher's Note: Four moles of water vapourise, absorbing 4 × 44 kJ, so the reaction is less exothermic.
Exam Note: Multiply by the 4 mol of water formed.
Question 128. The standard enthalpy change for the following reaction is 436.4 kJ: H2(g) → H(g) + H(g). What is the ΔfH° of atomic hydrogen (H)?
(a) 872.8 kJ/mol (b) 218.2 kJ/mol (c) −218.2 kJ/mol (d) −436.9 kJ/mol
Solution. The reaction forms 2 mol H from the element H2: 2ΔfH°(H) = 436.4 → ΔfH°(H) = 218.2 kJ/mol. Answer (b).
Teacher's Note: Formation enthalpy is per mole of H atoms: divide the dissociation enthalpy by 2.
Exam Note: H2 is the standard-state element.
Question 129. Determine enthalpy of formation for H2O2(l), using listed enthalpies of reaction: N2H4(l) + 2H2O2(l) → N2(g) + 4H2O(l); ΔrH1° = −818 kJ/mol; N2H4(l) + O2(g) → N2(g) + 2H2O(l); ΔrH2° = −622 kJ/mol; H2(g) + ½O2(g) → H2O(l); ΔrH3° = −285 kJ/mol
(a) −383 kJ/mol (b) −187 kJ/mol (c) −498 kJ/mol (d) None of these
Solution. Reaction 1 − reaction 2: 2H2O2 → O2 + 2H2O, ΔH = −818 + 622 = −196 kJ, so per mole H2O2 → H2O + ½O2 is −98 kJ.
ΔfH°(H2O2) = ΔfH°(H2O) − (−98) = −285 + 98 = −187 kJ/mol. Answer (b).
Teacher's Note: Subtract the hydrazine equations to eliminate N2H4, then link to H2O formation.
Exam Note: Work per mole of H2O2.
Question 130. Heat of combustion of ethanol at constant pressure and at temperature T K is found to be −q J mol−1. Hence, heat of combustion (in J·mol−1) of ethanol at the same temperature at constant volume will be:
(a) RT − q (b) −(q + RT) (c) q − RT (d) q + RT
Solution. C2H5OH(l) + 3O2(g) → 2CO2(g) + 3H2O(l): Δng = 2 − 3 = −1.
ΔU = ΔH − ΔngRT = −q + RT = RT − q. Answer (a).
Teacher's Note: ΔU = ΔH − ΔngRT with Δng = −1 for liquid ethanol burning.
Exam Note: Water is liquid, so only O2 and CO2 count.
Question 131. Stearic acid [CH3(CH2)16CO2H] is a fatty acid, the part of fat that stores most of the energy. 1.0 g of stearic acid was burned in a bomb calorimeter. The bomb had a heat capacity of 652 J/°C. If the temperature of 500 g water (c = 4.18 J/g °C) rose from 25.0 to 39.3°C, how much heat was released when the stearic acid was burned? [Given Cp(H2O) = 4.18 J/g°C]
(a) 39.21 kJ (b) 29.91 kJ (c) 108 kJ (d) 9.32 kJ
Solution. Heat released = heat absorbed by bomb + water = (652 + 500 × 4.18) × (39.3 − 25.0) = (652 + 2090) × 14.3 = 39211 J = 39.21 kJ. Answer (a).
Teacher's Note: Heat of reaction = −(Cbomb + m c) ΔT; include both the bomb and the water.
Exam Note: ΔT = 14.3°C.
Question 132. Gasoline has an enthalpy of combustion 24000 kJ/gallon. When gasoline burns in an automobile engine, approximately 30% of the energy released is used to produce mechanical work. The remainder is lost as heat transfer to the engine's cooling system. As a start on estimating how much heat transfer is required, calculate what mass of water could be heated from 25°C to 75°C by the combustion of 1.0 gallon of gasoline in an automobile? (Given: C (H2O) = 4.18 J/g°C)
(a) 34.45 kg (b) 80.383 kg (c) 22 kg (d) 224 kg
Solution. Heat lost to cooling = 70% of 24 × 106 J = 16.8 × 106 J.
m = q/(c ΔT) = 16.8 × 106/(4.18 × 50) = 80383 g = 80.383 kg. Answer (b).
Teacher's Note: Only the 70% not converted to work is available as heat; then m = q/(cΔT).
Exam Note: Convert 24000 kJ to J.
Question 133. A 0.05 L sample of 0.2 M aqueous hydrochloric acid is added to 0.05 L of 0.2 M aqueous ammonia in a calorimeter. Heat capacity of entire calorimeter system is 480 J/K. The temperature increase is 1.09 K. Calculate ΔrH° in kJ/mol for the following reaction: HCl(aq.) + NH3(aq.) → NH4Cl(aq.)
(a) −52.32 (b) −61.1 (c) −55.8 (d) −58.2
Solution. Moles of acid = 0.05 × 0.2 = 0.01 mol. Heat released = 480 × 1.09 = 523.2 J.
ΔrH° = −523.2/(0.01 × 1000) = −52.32 kJ/mol. Answer (a).
Teacher's Note: Calorimeter constant includes everything, so q = C ΔT; divide by moles of limiting reagent.
Exam Note: Equal moles of acid and base.
Question 134. A coffee cup calorimeter initially contains 125 g of water, at a temperature of 24.2°C. 8 g of ammonium nitrate (NH4NO3), also at 24.2°C, is added to the water, and the final temperature is 18.2°C. What is the heat of solution of ammonium nitrate in kJ/mol? The specific heat capacity of the solution is 4.2 J/°C g.
(a) 33.51 kJ/mol (b) 39.5 kJ/mol (c) 32.2 kJ/mol (d) 37.3 kJ/mol
Solution. Heat absorbed from the water = (125 + 8) × 4.2 × 6.0 = 3351.6 J. Moles = 8/80 = 0.1 mol.
ΔsolnH = 3351.6/0.1 = 33516 J/mol = +33.51 kJ/mol (endothermic). Answer (a).
Teacher's Note: Temperature fall means heat is absorbed by the dissolving salt: ΔH is positive.
Exam Note: Mass of solution = 125 + 8 g; M(NH4NO3) = 80.
Question 135. Read following statement(s) carefully and select the right option: (I) The enthalpy of solution of CaCl2·6H2O in a large volume of water is endothermic to the extent of 3.5 kcal/mol. If ΔH = −23.2 kcal for the reaction, CaCl2(s) + 6H2O(l) → CaCl2·6H2O(s), then heat of solution of CaCl2 (anhydrous) in a large volume of water is −19.7 kcal/mol. (II) For the reaction 2Cl(g) → Cl2(g); the sign of ΔH and ΔS are negative.
(a) statement I and II both are wrong (b) both are correct (c) only I is correct (d) only II is correct
Solution. (I) CaCl2(s) → CaCl2·6H2O(s): −23.2; then dissolving the hexahydrate: +3.5. Sum = −19.7 kcal/mol, so (I) is correct. (II) Bond formation releases energy (ΔH < 0) and gas moles fall (ΔS < 0), so (II) is correct. Answer (b).
Teacher's Note: Hess's law: anhydrous dissolution = hydration + solution of the hydrate.
Exam Note: Check each statement separately.
Question 136. If the enthalpy of formation and enthalpy of solution of HCl(g) are −92.3 kJ/mol and −75.14 kJ/mol respectively then find enthalpy of formation of Cl−(aq):
(a) −17.16 kJ/mol (b) −167.44 kJ/mol (c) 17.16 kJ/mol (d) None of these
Solution. HCl(g) + aq → H+(aq) + Cl−(aq); ΔsolH = ΔfH(H+) + ΔfH(Cl−) − ΔfH(HCl, g). With ΔfH(H+, aq) = 0:
ΔfH(Cl−, aq) = −75.14 − 92.3 = −167.44 kJ/mol. Answer (b).
Teacher's Note: Standard convention: ΔfH°(H+, aq) = 0.
Exam Note: Keep the sign of both terms negative.
Question 137. At 25°C, 1 mole of MgSO4 was dissolved in water, the heat evolved was found to be 91.2 kJ. One mole of MgSO4·7H2O on dissolution gives a solution of the same composition accompanied by an absorption of 13.8 kJ. The enthalpy of hydration, i.e., ΔH for the reaction MgSO4(s) + 7H2O(l) → MgSO4·7H2O(s) is:
(a) −105 kJ/mol (b) −77.4 kJ/mol (c) 105 kJ/mol (d) None of these
Solution. MgSO4(s) → solution: −91.2 kJ. MgSO4·7H2O(s) → solution: +13.8 kJ.
Hydration = (−91.2) − (+13.8) = −105 kJ/mol. Answer (a).
Teacher's Note: Hess's law: hydration = dissolution of anhydrous − dissolution of hydrate.
Exam Note: Reverse the hydrate's dissolution step.
Question 138. The enthalpies of neutralization of a weak base AOH and a strong base BOH by HCl are −12250 cal/mol and −13000 cal/mol respectively. When one mole of HCl is added to a solution containing 1 mole of AOH and 1 mole of BOH, the enthalpy change was −12500 cal/mol. In what ratio is the acid distribution between AOH and BOH?
(a) 2 : 1 (b) 2 : 3 (c) 1 : 2 (d) None of these
Solution. Let x mol HCl react with AOH: −12250x − 13000(1 − x) = −12500 → 750x = 500 → x = 2/3.
So AOH : BOH = 2/3 : 1/3 = 2 : 1. Answer (a).
Teacher's Note: Weighted average of the two neutralization enthalpies by mole fraction of acid.
Exam Note: Solve for the fraction x of HCl neutralizing AOH.
Question 139. The magnitude of enthalpy change for neutralization of the reaction: MgO(s) + 2HCl(aq) → MgCl2(aq) + H2O(l) (Given H+(aq) + OH−(aq) → H2O(l); −57 kJ/mol) will be:
(a) less that 57 kJ mol−1 (b) −57 kJ mol−1 (c) greater than 57 kJ mol−1 (d) 57 kJ mol−1
Solution. Answer (from key): (c). MgO is an insoluble solid base; besides forming water (−57 kJ per mol of water), the reaction also includes the exothermic dissolution/hydration of Mg2+, so the total heat evolved is greater than 57 kJ/mol.
Teacher's Note: Neutralization of a solid base includes extra exothermic hydration of the metal ion.
Exam Note: The −57 kJ value applies only to strong acid and strong base.
Question 140. Enthalpy of neutralization of HCl by NaOH is −55.84 kJ/mol and by NH4OH is −51.34 kJ/mol. The enthalpy of ionization of NH4OH is:
(a) 107.18 kJ/mol (b) 4.5 kJ/mol (c) −4.5 kJ/mol (d) None of these
Solution. ΔneutH(NH4OH) = ΔionH + ΔneutH(strong): −51.34 = x + (−55.84) → x = +4.5 kJ/mol. Answer (b).
Teacher's Note: Weak base releases less heat because part of the energy is used to ionize it.
Exam Note: Difference between weak and strong values.
Question 141. Which of the following reaction is endothermic?
(a) CaCO3 → CaO + CO2 (b) Fe + S → FeS (c) NaOH + HCl → NaCl + H2O (d) CH4 + 2O2 → CO2 + 2H2O
Solution. Thermal decomposition of calcium carbonate requires continuous heating, so it is endothermic. FeS formation, neutralization and combustion are exothermic. Answer (a).
Teacher's Note: Decompositions that need heating (limestone) are endothermic; combustion and neutralization are exothermic.
Exam Note: Recall the standard examples.
Question 142. Which of the following is not correct?
(a) Dissolution of NH4Cl in excess of water is an endothermic process (b) Neutralisation is always exothermic (c) The absolute value of enthalpy (H) can be determined experimentally (d) The heat of reaction at constant volume is denoted by ΔE
Solution. Only changes in enthalpy (ΔH) can be measured, not the absolute value of H. Hence statement (c) is incorrect. Answer (c).
Teacher's Note: Absolute enthalpy cannot be measured; only ΔH is determined experimentally.
Exam Note: H is a state function but has no absolute zero.
Question 143. Substance A2B(g) can undergoes decomposition to form two set of products: A2B(g) → A2(g) + B(g); ΔH° = 40 kJ/mol; and A2B(g) → A(g) + AB(g); ΔH° = 50 kJ/mol. If the molar ratio of A2(g) to A(g) is 5 : 3 in a set of product gases, then the energy involved in the decomposition of 1 mole of A2B(g) is:
(a) 48.75 kJ/mol (b) 43.73 kJ/mol (c) 46.25 kJ/mol (d) None of these
Solution. Each decomposition produces one A2 or one A, so the product ratio equals the ratio of the paths: 5/8 of the A2B follows path 1 and 3/8 path 2.
ΔH = (5/8) × 40 + (3/8) × 50 = 25 + 18.75 = 43.75 kJ/mol ≈ 43.73. Answer (b).
Teacher's Note: Weight each path's ΔH by the fraction of substance decomposing by that path.
Exam Note: Fractions are 5/8 and 3/8.
Question 144. Boron can undergo the following reactions with the given enthalpy changes: 2B(s) + (3/2)O2(g) → B2O3(s); ΔH = −1260 kJ; 2B(s) + 3H2(g) → B2H6(g); ΔH = 30 kJ. Assume no other reactions are occurring. If in a container (operating at constant pressure) which is isolated from the surrounding, mixture of H2(gas) and O2(gas) are passed over excess of B(s), then calculate the molar ratio (O2 : H2) so that temperature of the container do not change:
(a) 15 : 3 (b) 42 : 1 (c) 1 : 42 (d) 1 : 84
Solution. No temperature change means net heat is zero. For x mol O2: ΔH = −1260 × (x/1.5) = −840x. For y mol H2: ΔH = 30 × (y/3) = 10y.
−840x + 10y = 0 → x/y = 10/840 = 1/84. So O2 : H2 = 1 : 84. Answer (d).
Teacher's Note: Adiabatic and isothermal condition: heat released by oxidation equals heat absorbed by B2H6 formation.
Exam Note: Scale each ΔH per mole of gas consumed.
Question 145. The enthalpy change for the following reaction is 368 kJ. Calculate the average O–F bond energy: OF2(g) → O(g) + 2F(g)
(a) 184 kJ/mol (b) 368 kJ/mol (c) 536 kJ/mol (d) 736 kJ/mol
Solution. Two O–F bonds are broken, so average bond energy = 368/2 = 184 kJ/mol. Answer (a).
Teacher's Note: Average bond energy = total energy to atomise divided by number of bonds broken.
Exam Note: OF2 has two O–F bonds.
Question 146. The enthalpy change for the reaction, C2H6(g) → 2C(g) + 6H(g) is X kJ. The bond energy of C–H bond is:
(a) X/2 (b) X/3 (c) X/6 (d) data insufficient
Solution. The enthalpy X covers breaking six C–H bonds and one C–C bond. Without the C–C bond energy the C–H bond energy cannot be isolated, so the data is insufficient. Answer (d).
Teacher's Note: Ethane has one C–C and six C–H bonds; both contribute to X.
Exam Note: X/6 is the common trap.
Question 147. The table given below lists the bond dissociation energy (Ediss) for single covalent bonds formed between C and atoms A, B, D, E: C–A 240, C–B 382, C–D 276, C–E 486 kcal mol−1. Which of the atoms has smallest size?
(a) D (b) E (c) A (d) D
Solution. Smaller atoms form shorter, stronger bonds. The highest dissociation energy is for C–E (486 kcal/mol), so atom E is the smallest. Answer (b) E.
Teacher's Note: Shorter bond means stronger bond, so the largest bond energy marks the smallest atom.
Exam Note: Compare with C as the common partner.
Question 148. Calculate P–Cl bond enthalpy. Given: ΔfH(PCl3, g) = 306 kJ/mol; ΔHatomization(P, s) = 314 kJ/mol; ΔfH(Cl, g) = 121 kJ/mol
(a) 123.66 kJ/mol (b) 371 kJ/mol (c) 19 kJ/mol (d) None of these
Solution. P(s) + (3/2)Cl2(g) → PCl3(g): 306 = (314 + 3 × 121) − 3(B.E. P–Cl) = 677 − 3 B.E.
B.E.(P–Cl) = (677 − 306)/3 = 371/3 = 123.66 kJ/mol. Answer (a) (using the data exactly as printed).
Teacher's Note: Formation enthalpy = energy to atomise elements − energy released forming 3 P–Cl bonds.
Exam Note: Three P–Cl bonds in PCl3.
Question 149. Calculate the enthalpy of the following reaction using the given bond energies (kJ/mol): (C–H = 414; H–O = 463; H–Cl = 431; C–Cl = 326; C–O = 335) CH3–OH(g) + HCl(g) → CH3–Cl(g) + H2O(g)
(a) −23 kJ/mol (b) −42 kJ/mol (c) −59 kJ/mol (d) −511 kJ/mol
Solution. Bonds broken: C–O (335) + O–H (463) + H–Cl (431) = 1229. Bonds formed: C–Cl (326) + 2 O–H (926) = 1252.
ΔH = 1229 − 1252 = −23 kJ/mol. Answer (a).
Teacher's Note: ΔH = Σ(bonds broken) − Σ(bonds formed); C–H bonds are unchanged.
Exam Note: Water forms two O–H bonds.
Question 150. Based on the values of B.E. given, ΔfH° of N2H4(g) is: Given: N–N = 159 kJ mol−1; H–H = 436 kJ mol−1; N≡N = 941 kJ mol−1; N–H = 398 kJ mol−1
(a) 711 kJ mol−1 (b) 62 kJ mol−1 (c) −98 kJ mol−1 (d) −711 kJ mol−1
Solution. N2 + 2H2 → N2H4: bonds broken = 941 + 2 × 436 = 1813; bonds formed = 159 + 4 × 398 = 1751.
ΔfH° = 1813 − 1751 = +62 kJ/mol. Answer (b).
Teacher's Note: Hydrazine has one N–N and four N–H bonds; use broken minus formed.
Exam Note: Count bonds carefully for N2H4.
Level 2 - Problems in Chemistry (Chapter 4 Thermodynamics)
Question 1. A heating coil is immersed in a 100 g sample of H2O(l) at 1 atm and 100°C in a closed vessel. In this heating process, 60% of the liquid is converted to gaseous form at constant pressure of 1 atm. Densities of liquid and gaseous water under these conditions are 1000 kg/m³ and 0.60 kg/m³ respectively. Magnitude of the work done for the process is:
(a) 4997 J (b) 4970 J (c) 9994 J (d) None of these
Solution. 60 g of water vaporises: Vgas = 0.060/0.60 = 0.1 m³ = 100 L; liquid volume lost = 0.060/1000 = 6 × 10−5 m³ = 0.06 L.
ΔV = 0.1 − 0.00006 = 0.09994 m³. |w| = P ΔV = 105 Pa × 0.09994 m³ = 9994 J (taking 1 atm ≈ 105 Pa as in the book). Answer (c).
Teacher's Note: Work = P × (Vgas − Vliquid lost); use mass ÷ density for each phase.
Exam Note: Do not neglect liquid volume; it is small but gives 9994.
Question 2. A rigid and insulated tank of 3 m³ volume is divided into two compartments. One compartment of volume of 2 m³ contains an ideal gas at 0.8314 MPa and 400 K and while the second compartment of volume 1 m³ contains the same gas at 8.314 MPa and 500 K. If the partition between the two compartments is ruptured, the final temperature of the gas is:
(a) 420 K (b) 450 K (c) 480 K (d) None of these
Solution. n1 = PV/RT = 0.8314 × 106 × 2/(8.314 × 400) = 500 mol; n2 = 8.314 × 106 × 1/(8.314 × 500) = 2000 mol.
Rigid and insulated: q = w = 0, so ΔU = 0: 500 Cv(Tf − 400) + 2000 Cv(Tf − 500) = 0 → Tf = (500 × 400 + 2000 × 500)/2500 = 480 K. Answer (c).
Teacher's Note: Isolated system: total ΔU = 0, so final T is the mole-weighted average of the initial temperatures.
Exam Note: Compute moles in each compartment from PV = nRT.
Question 3. What is the value of change in internal energy at 1 atm in the process? H2O(l, 323 K) → H2O(g, 423 K). Given: Cv,m(H2O, l) = 75.0 JK−1 mol−1; Cp,m(H2O, g) = 33.314 JK−1 mol−1; ΔHvap at 373 K = 40.7 kJ/mol
(a) 42.91 kJ/mol (b) 43086 kJ/mol (c) 42.6 kJ/mol (d) 49.6 kJ/mol
Solution. Path: (1) heat liquid 323 → 373 K: ΔU1 = 75 × 50 = 3750 J. (2) vaporise at 373 K: ΔU2 = ΔH − ΔngRT = 40.7 − 8.314 × 373/1000 = 37.6 kJ. (3) heat vapour 373 → 423 K: Cv,m = 33.314 − 8.314 = 25 J/K, ΔU3 = 25 × 50 = 1250 J.
ΔU = 3.75 + 37.6 + 1.25 = 42.6 kJ/mol. Answer (c).
Teacher's Note: Internal energy is a state function: split into heating, phase change at 373 K, heating.
Exam Note: Use Cv for gas = Cp − R.
Question 4. For an ideal gas Cp,m/Cv,m = γ. The molecular mass of the gas is M, its specific heat capacity at constant volume is:
(a) R/(M(γ − 1)) (b) M/(R(γ − 1)) (c) γRM/(γ − 1) (d) γR/(M(γ − 1))
Solution. Cp,m − Cv,m = R and Cp,m = γCv,m give Cv,m = R/(γ − 1). Specific heat = molar heat capacity ÷ molar mass: cv = R/(M(γ − 1)). Answer (a).
Teacher's Note: Specific heat per gram = molar heat capacity divided by molar mass M.
Exam Note: Derive Cv,m = R/(γ − 1) first.
Question 5. 1 mole of an ideal gas A (Cv,m = 3R) and 2 mole of an ideal gas B (Cv,m = 3/2 R) taken in a container and expanded reversible and adiabatically from 1 litre to 4 litre starting from initial temperature of 320 K. ΔE or ΔU for the process is:
(a) −240R (b) 240R (c) 480R (d) −960R
Solution. Total Cv = 1 × 3R + 2 × 1.5R = 6R; Cp = 6R + 3R = 9R; γ = 1.5.
T2 = 320 × (1/4)γ−1 = 320 × (1/4)1/2 = 160 K.
ΔU = 6R × (160 − 320) = −960R. Answer (d).
Teacher's Note: Mixture: add heat capacities of components to get γ, then use TVγ−1 = constant.
Exam Note: Total n = 3 mol; R × 6 is total Cv.
Question 6. Calculate the work done by the system in an irreversible (single step) adiabatic expansion of 2 mole of a polyatomic gas (γ = 4/3) from 300 K and pressure 10 atm to 1 atm:
(a) −227R (b) −205R (c) −405R (d) None of these
Solution. γ = 4/3 gives Cv,m = R/(γ − 1) = 3R. ΔU = w: 2 × 3R × (T2 − 300) = −1 × 2R(T2 − 300 × 1/10) → 3(T2 − 300) = −(T2 − 30) → 4T2 = 930 → T2 = 232.5 K.
w = ΔU = 2 × 3R × (232.5 − 300) = −405R. Answer (c).
Teacher's Note: Single-step adiabatic: ΔU = −PextΔV with Pext = final pressure; solve for T2.
Exam Note: Cv from γ: Cv = R/(γ − 1).
Question 7. One mole of an ideal gas is carried through the reversible cyclic process as shown in figure. The max. temperature attained by the gas during the cycle:
(a) 7/(6R) (b) 12/(49R) (c) 49/(12R) (d) None of these
Solution. Line BC joins (1 L, 4 bar) and (2 L, 1 bar): P − 4 = −3(V − 1) → P = 7 − 3V (bar, L).
RT = PV = 7V − 3V²; d(PV)/dV = 7 − 6V = 0 → V = 7/6 L.
RTmax = 7 × 7/6 − 3 × 49/36 = 49/6 − 49/12 = 49/12 → Tmax = 49/(12R) (bar·L units). Answer (c).
Teacher's Note: Write P as a linear function of V on BC, then maximise PV = nRT.
Exam Note: Maximum of a parabola in V gives the maximum T.
Question 8. Two moles of a triatomic linear gas (neglect vibration degree of freedom) are taken from A as shown in figure. The volume ratio VB/VA = 4. If the temperature at A is −73°C, then:
(i) Work done by the gas in AB process is: (a) 6.16 kJ (b) 308.3 kJ (c) 9.97 kJ (d) 0 J
(ii) Total enthalpy change in both steps is: (a) 3000R (b) 4200R (c) 2100R (d) 0
(i) (c) (ii) (b)
Solution. The figure is a V–T plot; AB is a straight line through the origin (V ∝ T), i.e. isobaric, and BC is vertical (constant T, isothermal). TA = −73°C = 200 K, so TB = 4 × 200 = 800 K.
(i) w = −P ΔV = −nRΔT = −2 × 8.314 × 600 = −9977 J ≈ 9.97 kJ (magnitude of work done by gas). Answer (c).
(ii) Linear triatomic (no vibration): Cv,m = 5R/2, Cp,m = 7R/2. ΔHAB = 2 × (7R/2) × 600 = 4200R; ΔHBC = 0 (isothermal ideal gas). Total = 4200R. Answer (b).
Teacher's Note: Isobaric step: w = −nRΔT, ΔH = nCpΔT; isothermal step: ΔH = 0.
Exam Note: Linear triatomic without vibration: Cp = 7R/2.
Question 9. A gas (Cv,m = 5/2 R) behaving ideally was allowed to expand reversibly and adiabatically from 1 litre to 32 litre. It's initial temperature was 327°C. The molar enthalpy change (in J/mol) for the process is:
(a) −1125R (b) −675 (c) −1575R (d) None of these
Solution. γ = (5/2 + 1)/(5/2) = 7/5. T2 = 600 × (1/32)2/5 = 600 × (1/25)2/5 = 600/4 = 150 K.
ΔHm = Cp,mΔT = (7R/2)(150 − 600) = −1575R. Answer (c).
Teacher's Note: Reversible adiabatic: TVγ−1 constant; then ΔH = nCpΔT.
Exam Note: 32 = 25, so the fraction is clean.
Question 10. Two mole of an ideal gas is heated at constant pressure of one atmosphere from 27°C to 127°C. If Cv,m = 20 + 10−2 T JK−1 mol−1, then q and ΔU for the process are respectively:
(a) 6362.8 J, 4700 J (b) 3037.2 J, 4700 J (c) 7062.8 J, 5400 J (d) 3181.4 J, 2350 J
Solution. ΔU = n∫Cv,mdT = 2[20 × 100 + 0.01 × (400² − 300²)/2] = 2[2000 + 350] = 4700 J.
w = −nRΔT = −2 × 8.314 × 100 = −1662.8 J. q = ΔU − w = 4700 + 1662.8 = 6362.8 J. Answer (a): q = 6362.8 J, ΔU = 4700 J.
Teacher's Note: Integrate temperature-dependent Cv for ΔU; then q = ΔU − w at constant pressure.
Exam Note: Work is −nRΔT, so q exceeds ΔU.
Question 11. 10 mole of an ideal gas is heated at constant pressure of one atmosphere from 27°C to 127°C. If Cv,m = 21.686 + 10−3 T, then ΔH for the process is:
(a) 3000 J (b) 3350 J (c) 3700 J (d) 30350
Solution. Cp,m = Cv,m + R = 21.686 + 8.314 + 10−3T = 30 + 10−3T.
ΔH = n∫Cp,mdT = 10[30 × 100 + 10−3(400² − 300²)/2] = 10[3000 + 35] = 30350 J. Answer (d). (The printed heat capacity subscript is unclear in the scan; the key and working show it is Cv,m.)
Teacher's Note: Convert Cv to Cp by adding R before integrating for ΔH.
Exam Note: Integrate term by term: linear and T2/2.
Question 12. For polytropic process PVn = constant, molar heat capacity (Cm) of an ideal gas is given by:
(a) Cv,m + R/(n − 1) (b) Cv,m + R/(1 − n) (c) Cv,m + R (d) Cp,m + R/(n − 1)
Solution. dq = dU − dw gives CmdT = Cv,mdT + P dV. From PVn = K and PV = RT: KV1−n = RT, so dV/dT = R/(K(1 − n)V−n), giving P dV/dT = R/(1 − n).
Hence Cm = Cv,m + R/(1 − n). Answer (b).
Teacher's Note: Check limits: n = 0 gives Cp, n = γ gives zero, n = 1 gives infinity (isothermal).
Exam Note: Test with n = 0 (isobaric) to confirm.
Question 13. 2 mole of an ideal monoatomic gas undergoes a reversible process for which PV² = C. The gas is expanded from initial volume of 1 L to final volume of 3 L starting from initial temperature of 300 K. Find ΔH for the process:
(a) −600R (b) −1000R (c) −3000R (d) None of these
Solution. PV² = C and PV = nRT give T ∝ 1/V: T2 = 300 × 1/3 = 100 K.
ΔH = nCp,mΔT = 2 × (5R/2) × (100 − 300) = −1000R. Answer (b).
Teacher's Note: ΔH = nCpΔT holds for any ideal-gas process; only the final T needs the process law.
Exam Note: T falls as V rises when PV² is constant.
Question 14. Calculate ΔS for 3 mole of a diatomic ideal gas which is heated and compressed from 298 K and 1 bar to 596 K and 4 bar: [Given: Cv,m(gas) = 5/2 R; ln(2) = 0.70; R = 2 cal K−1 mol−1]
(a) −14.7 cal K−1 (b) +14.7 cal K−1 (c) −4.9 cal K−1 (d) 6.3 cal K−1
Solution. ΔS = nCp,m ln(T2/T1) − nR ln(P2/P1) with Cp,m = 7R/2 = 7 cal/K·mol:
ΔS = 3 × 7 × ln 2 − 3 × 2 × ln 4 = 21 × 0.70 − 6 × 1.40 = 14.7 − 8.4 = 6.3 cal/K. Answer (d).
Teacher's Note: For changing T and P use ΔS = nCpln(T2/T1) − nR ln(P2/P1).
Exam Note: ln 4 = 2 ln 2 = 1.40.
Question 15. One mole of an ideal monoatomic gas at 27°C is subjected to a reversible isentropic compression until final temperature reaches to 327°C. If the initial pressure is 1.0 atm then find the value of (ln P2): (Given: ln 2 = 0.7)
(a) 1.75 atm (b) 0.176 atm (c) 1.0395 atm (d) 2.0 atm
Solution. Isentropic: ΔS = 0 = nCp ln(T2/T1) + nR ln(P1/P2) → ln(P2/P1) = (Cp/R) ln(T2/T1) = (5/2) ln(600/300) = 2.5 × 0.7 = 1.75.
With P1 = 1 atm: ln P2 = 1.75. Answer (a).
Teacher's Note: Isentropic means ΔS = 0; this reproduces TγP1−γ = constant.
Exam Note: P1 = 1 atm so ln P2 equals ln(P2/P1).
Question 16. Two mole of an ideal gas is expanded irreversibly and isothermally at 37°C until its volume is doubled and 3.41 kJ heat is absorbed from surroundings. ΔStotal (system + surrounding) is:
(a) −0.52 J/K (b) 0.52 J/K (c) 22.52 J/K (d) 0
Solution. ΔSsystem = nR ln(V2/V1) = 2 × 8.314 × ln 2 = 11.52 J/K. ΔSsurr = −q/T = −3410/310 = −11.0 J/K.
ΔStotal = 11.52 − 11.0 = +0.52 J/K. Answer (b).
Teacher's Note: ΔSsys uses the reversible path; ΔSsurr uses actual heat exchanged: total is positive for irreversible change.
Exam Note: T = 37 + 273 = 310 K.
Question 17. For a perfectly crystalline solid Cp,m = aT³ + bT, where a and b are constant. If Cp,m is 0.40 J/K mol at 10 K and 0.92 J/K mol at 20 K, then molar entropy at 20 K is:
(a) 0.92 J/K mol (b) 8.66 J/K mol (c) 0.813 J/K mol (d) None of these
Solution. 0.40 = 1000a + 10b and 0.92 = 8000a + 20b. Solve: 2 × (first) → 0.80 = 2000a + 20b, subtract: 0.12 = 6000a → a = 2 × 10−5; b = (0.40 − 0.02)/10 = 0.038.
Sm = ∫020(aT² + b)dT = a × 20³/3 + b × 20 = 0.0533 + 0.760 = 0.813 J/K·mol. Answer (c).
Teacher's Note: Find constants from the two data points, then integrate Cp/T from 0 K (third law).
Exam Note: Entropy at 0 K is zero for perfect crystals.
Question 18. Which of the following statement(s) is/are correct? Statement (i): The entropy in isolated system with P–V work only, is always maximized at equilibrium. Statement (ii): It is possible for the entropy of a close system to decrease substantially in an irreversible process. Statement (iii): Entropy can be created but not destroyed. Statement (iv): ΔSsystem is zero for reversible process in an isolated system.
(a) Statement i, ii, iii (b) Statement ii, iv (c) Statement i, ii, iv (d) All of these
Solution. (i) True: an isolated system's entropy rises to a maximum at equilibrium. (ii) True: a closed system can lose entropy by giving heat to surroundings, even in an irreversible process. (iii) True: entropy of the universe is created in irreversible processes and never destroyed. (iv) True: in an isolated system a reversible process has ΔS = 0. Answer (d).
Teacher's Note: Second law: entropy of an isolated system never decreases; closed systems can lose entropy to surroundings.
Exam Note: Check each statement separately.
Question 19. Combustion of sucrose is used by aerobic organisms for providing energy for the life sustaining processes. If all the capturing of energy from the reaction is done through electrical process (non P–V work) then calculate maximum available energy which can be captured by combustion of 34.2 gm of sucrose. Given: ΔHcombustion(sucrose) = −6000 kJ mol−1; ΔScombustion = 180 J/K-mol and body temperature is 300 K
(a) 600 kJ (b) 594.6 kJ (c) 5.4 kJ (d) 605.4 kJ
Solution. Maximum non-P–V work = −ΔG. n = 34.2/342 = 0.1 mol. ΔG = ΔH − TΔS = −6000 − 300 × 0.180 = −6054 kJ/mol.
Maximum energy = 0.1 × 6054 = 605.4 kJ. Answer (d).
Teacher's Note: Maximum non-expansion work = −ΔG = −ΔH + TΔS; scale by moles.
Exam Note: Entropy gain adds to the available work.
Question 20. For the hypothetical reaction A2(g) + B2(g) ⇌ 2AB(g), ΔrG° and ΔrS° are 20 kJ/mol and −20 JK−1 mol−1 respectively at 200 K. If ΔrCp is 20 JK−1 mol−1 then ΔrH° at 400 K is:
(a) 20 kJ/mol (b) 7.98 kJ/mol (c) 28 kJ/mol (d) None of these
Solution. At 200 K: ΔrH° = ΔrG° + TΔrS° = 20 + 200 × (−0.020) = 16 kJ/mol.
Kirchhoff: ΔrH°400 = 16 + ΔrCp(400 − 200)/1000 = 16 + 0.020 × 200 = 20 kJ/mol. Answer (a).
Teacher's Note: First get ΔH at 200 K from ΔG and ΔS, then apply Kirchhoff's law to 400 K.
Exam Note: Convert J to kJ in both steps.
Question 21. Calculate ΔfG° for (NH4Cl, s) at 310 K. Given: ΔfH°(NH4Cl, s) = −314.5 kJ/mol; ΔrCp = 0; S°(N2) = 192, S°(H2) = 130.5, S°(Cl2) = 233, S°(NH4Cl, s) = 99.5 JK−1 mol−1. All given data at 300 K.
(a) −198.56 kJ/mol (b) −426.7 kJ/mol (c) −202.3 kJ/mol (d) None of these
Solution. Formation: ½N2 + 2H2 + ½Cl2 → NH4Cl. ΔfS° = 99.5 − (96 + 261 + 116.5) = −374 J/K·mol.
ΔrCp = 0, so ΔH° and ΔS° are the same at 310 K. ΔfG° = −314.5 − 310 × (−374)/1000 = −314.5 + 115.94 = −198.56 kJ/mol. Answer (a).
Teacher's Note: Formation reaction uses ½ N2, 2 H2, ½ Cl2; zero ΔCp freezes ΔH and ΔS.
Exam Note: Coefficients ½, 2, ½ on elements.
Question 22. Using listed informations, calculate ΔrG° (in kJ/mol) at 27°C: Co3O4(s) + 4CO(g) → 3Co(s) + 4CO2(g). Given: At 300 K ΔH°f (kJ/mol): −891, −110.5, 0.0, −393.5; S° (J/K-mol): 102.5, 197.7, 30.0, 213.7
(a) −214.8 (b) −195.0 (c) −200.3 (d) −256.45
Solution. ΔrH° = 4(−393.5) − [−891 + 4(−110.5)] = −1574 + 1333 = −241 kJ.
ΔrS° = 3(30.0) + 4(213.7) − [102.5 + 4(197.7)] = 944.8 − 893.3 = 51.5 J/K.
ΔrG° = −241 − 300 × 51.5/1000 = −256.45 kJ/mol. Answer (d).
Teacher's Note: Compute ΔH° and ΔS° with stoichiometric coefficients, then ΔG° = ΔH° − TΔS° at 300 K.
Exam Note: Elements Co(s) contribute zero ΔHf° but non-zero S°.
Question 23. Fixed mass of an ideal gas contained in a 24.63 L sealed rigid vessel at 1 atm is heated from −73°C to 27°C. Calculate change in Gibbs's energy if entropy of gas is a function of temperature as S = 2 + 10−2 T (J/K): (Use 1 atm L = 0.1 kJ)
(a) 1231.5 J (b) 1281.5 J (c) 781.5 J (d) 0
Solution. Rigid vessel: P2/P1 = T2/T1 = 300/200, so P2 = 1.5 atm and ΔP = 0.5 atm.
dG = V dP − S dT → ΔG = VΔP − ∫S dT = 24.63 × 0.5 × 100 J − ∫200300(2 + 0.01T)dT = 1231.5 − (200 + 250) = 781.5 J. Answer (c).
Teacher's Note: For a single phase dG = V dP − S dT; here V is fixed, so integrate both terms.
Exam Note: 1 atm·L = 100 J; ∫S dT = 450 J.
Question 24. The molar heat capacities at constant pressure (assumed constant with respect to temperature) of A, B and C are in ratio of 3 : 1.5 : 2.0. The enthalpy change for the exothermic reaction A + 2B → 3C at 300 K and 310 K is ΔH300 and ΔH310 respectively then:
(a) ΔH300 > ΔH310 (b) ΔH300 < ΔH310 (c) ΔH300 = ΔH310 (d) if T2 > T1 then ΔH310 > ΔH300 and if T2 < T1 then ΔH310 < ΔH300
Solution. ΔrCp = 3(2.0) − [3 + 2(1.5)] = 6 − 6 = 0. By Kirchhoff's law ΔHT2 − ΔHT1 = ΔrCpΔT = 0, so ΔH300 = ΔH310. Answer (c).
Teacher's Note: Kirchhoff's law: ΔH changes with T only through ΔrCp; zero ΔCp means constant ΔH.
Exam Note: Use the ratio as numbers; only ΔCp = 0 matters.
Download Narendra Awasthi Solutions for JEE Math PDF
Chapter-wise Narendra Awasthi Solutions: Narendra Awasthi Solutions Physical Chemistry Chapter 4 Thermodynamics Part 1
Explore reliable mathematical solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 4 Thermodynamics Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with Narendra Awasthi Solutions
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Explore More Study Resources for JEE Math
In addition to these Narendra Awasthi Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.