Narendra Awasthi Solutions Physical Chemistry Chapter 4 Thermodynamics Part 2

Step-by-Step Narendra Awasthi Solutions for JEE Chemistry Chapter 04 Thermodynamics

Explore reliable textbook solutions for Chapter 04 Thermodynamics tailored for JEE learners using Narendra Awasthi methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 04 Thermodynamics Textbook Solutions PDF

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Thermodynamics - Level 2 (Q25-40) and Level 3

Level 2 (Questions 25 to 40)

Question L2-25. Determine ΔU° at 300 K for the reaction 4CO(g) + 8H2(g) → 3CH4(g) + CO2(g) + 2H2O(l), using the listed enthalpies of reaction: C(graphite) + ½O2(g) → CO(g), ΔH1° = −110.5 kJ; CO(g) + ½O2(g) → CO2(g), ΔH2° = −282.9 kJ; H2(g) + ½O2(g) → H2O(l), ΔH3° = −285.8 kJ; C(graphite) + 2H2(g) → CH4(g), ΔH4° = −74.8 kJ.
(a) −653.5 kJ   (b) −686.2 kJ   (c) −747.4 kJ   (d) None of these

Solution. ΔH° = −3ΔH1° + ΔH2° + 2ΔH3° + 3ΔH4° = 331.5 − 282.9 − 571.6 − 224.4 = −747.4 kJ.

Δng = 4 − 12 = −8 (water is liquid). ΔU° = ΔH° − ΔngRT = −747.4 + 8 × 8.314 × 300/1000 = −727.44 kJ.

Answer: (d) (−727.44 kJ is not listed).

Teacher's Note: Combine equations by Hess law, then convert ΔH to ΔU using Δng of gases only; −747.4 is ΔH, not ΔU.

Exam Note: Choosing (c) loses the mark; convert ΔH to ΔU.

Question L2-26. Calculate ΔfH° (in kJ/mol) for Cr2O3 from the ΔrG° and S° values provided at 27°C: 4Cr(s) + 3O2(g) → 2Cr2O3(s); ΔrG° = −2093.4 kJ/mol. S° (J/K mol): Cr(s) = 24; O2(g) = 205; Cr2O3(s) = 81.
(a) −2258.1 kJ/mol   (b) −1129.05 kJ/mol   (c) −964.35 kJ/mol   (d) None of these

Solution. ΔrS° = 2 × 81 − 4 × 24 − 3 × 205 = −549 J/K.

ΔrH° = ΔrG° + TΔrS° = −2093.4 + 300 × (−549)/1000 = −2258.1 kJ for 2 mol of Cr2O3.

ΔfH°(Cr2O3) = −2258.1/2 = −1129.05 kJ/mol.

Answer: (b)

Teacher's Note: The equation forms 2 mol of oxide, so halve ΔrH° to get the value per mole.

Exam Note: Divide by 2: formation enthalpy is per mole.

Question L2-27. Calculate the heat produced (in kJ) when 224 g of CaO is completely converted to CaCO3 by reaction with CO2 at 27°C in a container of fixed volume. Given ΔfH°(CaCO3, s) = −1207 kJ/mol; ΔfH°(CaO, s) = −635 kJ/mol; ΔfH°(CO2, g) = −394 kJ/mol; [use R = 8.3 K−1 mol−1].
(a) 702.04 kJ   (b) 721.96 kJ   (c) 712 kJ   (d) 721 kJ

Solution. CaO(s) + CO2(g) → CaCO3(s): ΔrH° = −1207 + 635 + 394 = −178 kJ/mol.

Δng = −1, so ΔE = ΔH − ΔngRT = −178 + 8.3 × 300/1000 = −175.51 kJ/mol.

n(CaO) = 224/56 = 4 mol, so qv = 4 × (−175.51) = −702.04 kJ; heat produced = 702.04 kJ.

Answer: (a)

Teacher's Note: Fixed volume means heat equals ΔE, not ΔH; convert using ΔngRT per mole, then multiply by 4 mol.

Exam Note: Use qv = ΔE, not ΔH.

Question L2-28. When 1.0 g of oxalic acid (H2C2O4) is burned in a bomb calorimeter whose heat capacity is 8.75 kJ/K, the temperature increases by 0.312 K. The enthalpy of combustion of oxalic acid at 27°C is:
(a) −245.7 kJ/mol   (b) −244.452 kJ/mol   (c) −246.947 kJ/mol   (d) None of these

Solution. H2C2O4(s) + ½O2(g) → H2O(l) + 2CO2(g); Δng = 3/2.

ΔUc = −(0.312 × 8.75/1) × 90 = −245.7 kJ/mol (molar mass 90 g/mol).

ΔH = ΔU + ΔngRT = −245.7 + 1.5 × 8.314 × 300/1000 = −241.96 kJ/mol.

Answer: (d) (−241.96 kJ/mol is not listed). Note: the book writes the intermediate result as −246.947, which is an arithmetic slip; the option (d) is still correct.

Teacher's Note: Bomb calorimeter gives ΔU; add ΔngRT (positive here) to get ΔH. −245.7 is only ΔU.

Exam Note: Convert ΔU to ΔH with correct sign.

Question L2-29. Enthalpy of neutralization of H3PO3 acid is −106.68 kJ/mol using NaOH. If the enthalpy of neutralization of HCl by NaOH is −55.84 kJ/mol, calculate ΔHionization of H3PO3 into its ions:
(a) 50.84 kJ/mol   (b) 5 kJ/mol   (c) 2.5 kJ/mol   (d) None of these

Solution. H3PO3 is dibasic, so complete neutralization gives 2 mol H2O: 2H+ + 2OH− → 2H2O, ΔH = 2 × (−55.84) = −111.68 kJ.

−106.68 = ΔHion − 111.68, so ΔHion = 5 kJ/mol.

Answer: (b)

Teacher's Note: H3PO3 is dibasic: two H+ neutralized, so subtract 2 × 55.84.

Exam Note: Count basicity (2) before subtracting.

Question L2-30. The enthalpy of neutralization of a weak monoprotic acid (HA) in 1 M solution with a strong base is −55.95 kJ/mol. If the unionized acid requires 1.4 kJ/mol heat for its complete ionization and the enthalpy of neutralization of a strong monobasic acid with a strong monoacidic base is −57.3 kJ/mol, what is the % ionization of the weak acid in molar solution?
(a) 1%   (b) 3.57%   (c) 35.7%   (d) 10%

Solution. HA → H+ + A−, ΔH = 1.4 kJ/mol for complete ionization.

−55.95 = ΔHionization − 57.3, so ΔHionization for 1 M HA = 1.35 kJ/mol.

The heat absorbed corresponds to the fraction that was unionized: 1.35/1.4 = 96.43 %. So the acid initially ionized = 100 − 96.43 = 3.57 %.

Answer: (b)

Teacher's Note: Heat absorbed on neutralization ionizes only the originally unionized acid; so ionized fraction is 1 − 1.35/1.4.

Exam Note: Answer is 3.57%, not 96.43%.

Question L2-31. Determine C–C and C–H bond enthalpy (in kJ/mol). Given: ΔfH°(C2H6, g) = −85 kJ/mol, ΔfH°(C3H8, g) = −104 kJ/mol, ΔsubH°(C, s) = 718 kJ/mol, B.E.(H–H) = 436 kJ/mol.
(a) 414, 345   (b) 345, 414   (c) 287, 404.5   (d) None of these

Solution. Let x = B.E.(C–C), y = B.E.(C–H).

Ethane: −85 = 2 × 718 + 3 × 436 − (x + 6y), so x + 6y = 2829 …(1)

Propane: −104 = 3 × 718 + 4 × 436 − (2x + 8y), so 2x + 8y = 4002 …(2)

Solving: y = 414 kJ/mol and x = 345 kJ/mol.

Answer: (b) C–C = 345, C–H = 414 kJ/mol.

Teacher's Note: Write formation enthalpy as atomization energy minus bond energies for ethane and propane, then solve two equations.

Exam Note: Keep the order C–C first, C–H second.

Question L2-32. Consider the following data: ΔfH°(N2H4, l) = 50 kJ/mol, ΔfH°(NH3, g) = −46 kJ/mol, B.E.(N–H) = 393 kJ/mol and B.E.(H–H) = 436 kJ/mol, ΔvapH(N2H4, l) = 18 kJ/mol. The N–N bond energy in N2H4 is:
(a) 226 kJ/mol   (b) 154 kJ/mol   (c) 190 kJ/mol   (d) None of these

Solution. From NH3: ½N2 + 3/2 H2 → NH3, −46 = x/2 + (3/2)(436) − 3(393), so B.E.(N≡N) = x = 958 kJ/mol.

N2H4(l) → N2(g) + 2H2(g), ΔH = −50 kJ = [18 + 4(393) + y] − [958 + 2(436)] = 1590 + y − 1830.

So B.E.(N–N) = y = 190 kJ/mol.

Answer: (c)

Teacher's Note: First get N≡N from ammonia, then include ΔvapH since hydrazine is liquid in the cycle.

Exam Note: Do not forget the 18 kJ vaporization term.

Question L2-33. What is the bond enthalpy of Xe–F bond? XeF4(g) → Xe+(g) + F−(g) + F2(g) + F(g); ΔrH = 292 kcal/mol. Given: ionization energy of Xe = 279 kcal/mol, B.E.(F–F) = 38 kcal/mol, electron affinity of F = 85 kcal/mol.
(a) 24 kcal/mol   (b) 34 kcal/mol   (c) 8.5 kcal/mol   (d) None of these

Solution. ΔrH = (heat supplied) − (heat evolved): 292 = [4x + 279] − [38 + 85].

4x = 292 − 279 + 123 = 136, so x = 34 kcal/mol.

Answer: (b)

Teacher's Note: Energy absorbed: break four Xe–F bonds and ionize Xe; energy released: F–F bond formed and F− electron gain.

Exam Note: Set up broken minus formed energies.

Question L2-34. If the enthalpy of hydrogenation of C6H6(l) into C6H12(l) is −205 kJ/mol and the resonance energy of C6H6(l) is −152 kJ/mol, then the enthalpy of hydrogenation of cyclohexene (a six-membered ring with one C=C double bond, drawn as a hexagon with one double bond) is: Assume ΔHvap of C6H6(l), C6H8(l), C6H12(l) all are equal.
(a) −535.5 kJ/mol   (b) −238 kJ/mol   (c) −357 kJ/mol   (d) −119 kJ/mol

Solution. Theoretical heat of hydrogenation of benzene (three isolated C=C) = actual heat of hydrogenation + resonance energy = −205 − 152 = −357 kJ/mol.

For one C=C (cyclohexene): −357/3 = −119 kJ/mol.

Answer: (d)

Teacher's Note: Resonance makes benzene hydrogenation less exothermic; theoretical value for three double bonds is −357, one bond gets a third.

Exam Note: Divide by 3 for one double bond.

Question L2-35. The enthalpy of combustion of propane (C3H8) gas in terms of given data is. Bond energies (kJ/mol): εC–H = +x1, εO=O = +x2, εC=O = +x3, εO–H = +x4, εC–C = x5. Resonance energy of CO2 is −z kJ/mol and ΔHvaporization[H2O(l)] is y kJ/mol.
(a) 8x1 + 2x5 + 5x2 − 6x3 − 8x4 − 4y − 3z   (b) 6x1 + x5 + 5x2 − 3x3 − 4x4 − 4y − 3z   (c) 8x1 + 2x5 + 5x2 − 6x3 − 8x4 − y − z   (d) 8x1 + x5 + 5x2 − 6x3 − 8x4 − 4y + 3z

Solution. C3H8(g) + 5O2(g) → 3CO2(g) + 4H2O(l).

Bonds broken: 8 C–H, 2 C–C, 5 O=O. Bonds formed: 6 C=O, 8 O–H. Extra stabilization: 3 CO2 each with resonance energy z, and condensation of 4 H2O(g) to liquid releases 4y.

ΔcH = 8x1 + 2x5 + 5x2 − 6x3 − 8x4 − 3z − 4y.

Answer: (a)

Teacher's Note: Count bonds in propane (8 C–H, 2 C–C), CO2 (6 C=O) and water; add resonance and vaporization corrections.

Exam Note: Include 3z and 4y corrections.

Question L2-36. The efficiency of an ideal gas with adiabatic exponent γ for the shown cyclic process would be. (Figure: V–T graph. A = (2T0, V0), B = (2T0, 2V0), C = (T0, V0). A to B is a vertical line at T = 2T0 (isothermal expansion); B to C is a straight line through the origin (V ∝ T, so constant pressure); C to A is a horizontal line at V = V0 (constant volume).)
TVT02T0V0ABC

(a) (γ−1)(2 ln 2 − 1) / [1 + (γ−1)2 ln 2]   (b) (γ−1)(1 − 2 ln 2) / [(γ−1)2 ln 2 − 1]   (c) (2 ln 2 + 1)(γ−1) / [(γ−1)2 ln 2 + 1]   (d) (2 ln 2 − 1) / [γ/(γ−1)]

Solution. For 1 mol. A→B isothermal at 2T0: q1 = RT·ln 2 with T = 2T0, so w1 = −2RT0 ln 2.

B→C at constant pressure P = RT0/V0: w2 = −P(V0 − 2V0) = +RT0; heat is released.

C→A at constant volume: q3 = Cv(2T0 − T0) = RT0/(γ−1), w3 = 0.

Efficiency = total work / heat absorbed = (2RT0 ln 2 − RT0)/(2RT0 ln 2 + RT0/(γ−1)) = (γ−1)(2 ln 2 − 1)/[1 + (γ−1)2 ln 2].

Answer: (a)

Teacher's Note: A line through the origin in V–T is isobaric; heat is absorbed only in A→B and C→A.

Exam Note: Heat absorbed only on A→B and C→A.

Question L2-37. Initially one mole of ideal gas (Cv = 5R/2) at 1.0 atm and 300 K is put through the following cycle: Step I: heating to twice its initial pressure at constant volume. Step II: adiabatic expansion to its initial temperature. Step III: isothermal compression back to 1.00 atm. What is the volume at state X? (Figure: P–V cycle with I a vertical rise, II an adiabatic curve falling to the right ending at X, III an isothermal curve returning to the start.)
VPIIIIIIX

(a) 40.4 L   (b) 65.0 L   (c) 139 L   (d) 4.35 L

Solution. V1 = RT/P = 0.0821 × 300/1 = 24.63 L. After step I: T2 = 600 K at V1.

γ = Cp/Cv = 7/5. Step II (adiabatic, 600 K → 300 K): T1V1γ−1 = T2V2γ−1, so 600/300 = (VX/V1)2/5, VX/V1 = 25/2 = 4√2.

VX = 4√2 × 24.63 = 139.3 L ≈ 139 L.

Answer: (c)

Teacher's Note: State X is the end of the adiabatic step; use TVγ−1 constant with γ = 7/5 for Cv = 5R/2.

Exam Note: Use γ = 1.4, not 5/3.

Question L2-38. What is the enthalpy of neutralization of HF against a strong base? Given: H+(aq) + OH−(aq) → H2O(l); ΔrH° = −56 kJ/mol; ΔfH°(HF, aq) = −329 kJ/mol; ΔfH°(H2O, l) = −285 kJ/mol; ΔfH°(F−, aq) = −320 kJ/mol.
(a) −17 kJ/mol   (b) −38 kJ/mol   (c) −47 kJ/mol   (d) −43 kJ/mol

Solution. ΔrH° = ΔfH°(H2O, l) − ΔfH°(OH−, aq): −56 = −285 − ΔfH°(OH−), so ΔfH°(OH−, aq) = −229 kJ/mol (H+ is zero).

HF(aq) + OH−(aq) → F−(aq) + H2O(l): ΔneutH° = (−320 − 285) − (−329 − 229) = −47 kJ/mol.

Answer: (c)

Teacher's Note: Get ΔfH° of OH− from the strong acid–base reaction, then apply products minus reactants.

Exam Note: Products minus reactants; H+(aq) is zero.

Question L2-39. The molar heat capacities of iodine vapour and solid are 7.8 and 14 cal/mol respectively. If the enthalpy of sublimation of iodine is 6096 cal/mole at 200°C, then what is ΔU (internal energy change) at 250°C in cal/mol?
(a) 5360   (b) 4740   (c) 6406   (d) None of these

Solution. I2(s) → I2(g). ΔCp = 7.8 − 14 = −6.2 cal/mol K.

ΔH at 250°C = 6096 + (−6.2)(50) = 5786 cal/mol.

ΔU = ΔH − ΔngRT = 5786 − 1 × 2 × 523 = 4740 cal/mol (R = 2 cal/mol K, T = 523 K).

Answer: (b)

Teacher's Note: Apply Kirchhoff law to shift ΔH to 250°C, then subtract ΔngRT using T = 523 K.

Exam Note: Use 523 K, and R = 2 cal.

Question L2-40. For the reaction that takes place at a certain temperature NH2COONH4(s) ⇌ 2NH3(g) + CO2(g). If the equilibrium pressure is 3X bar, then ΔrG° would be:
(a) −RT ln 9 − 3RT ln X   (b) RT ln 4 − 3RT ln X   (c) −3RT ln X   (d) None of these

Solution. Total pressure 3X bar gives P(NH3) = 2X and P(CO2) = X.

Kp = (2X)2(X) = 4X3. ΔrG° = −RT ln Kp = −RT ln 4 − 3RT ln X.

This matches none of (a), (b), (c).

Answer: (d)

Teacher's Note: Mole fractions 2/3 and 1/3 give partial pressures 2X and X; Kp = 4X3.

Exam Note: Sign: ΔrG° = −RT ln K, so −RT ln 4.

Level 3: Passage 1

The first law of thermodynamics for a closed system is dU = dq + dw, where dw = dwpv + dwnon-pv. The most common kind of wnon-pv is electrical work. As per IUPAC convention, work done on the system is positive.

Question P1-1. A system generates 50 J of electrical energy, has 150 J of pressure-volume work done on it by the surroundings while releasing 300 J of heat energy. What is the change in the internal energy of the system?
(a) −500   (b) −100   (c) −300   (d) −200

Solution. Electrical work done by the system = −50 J; PV work on the system = +150 J; heat released = −300 J.

ΔU = q + w = −300 + 150 − 50 = −200 J.

Answer: (d)

Teacher's Note: Sign each term by IUPAC rule: work done by system and heat released are negative.

Exam Note: Assign signs first, then add.

Question P1-2. A system generates 50 J of electrical energy and delivers 150 J of pressure-volume work against the surroundings while releasing 300 J of heat energy. What is the change in the internal energy of the system?
(a) −100   (b) −400   (c) −300   (d) −500

Solution. ΔU = q + wpv + welec = −300 − 150 − 50 = −500 J.

Answer: (d)

Teacher's Note: Here PV work is done by the system, so it is negative, unlike the previous question.

Exam Note: All three terms are negative here.

Level 3: Passage 2

If the boundary of a system moves by an infinitesimal amount, the work involved is dw = −Pext dV. For an irreversible process w = −PextΔV (ΔV = Vf − Vi). For a reversible process Pext = Pint ± dP ≈ Pint, so for a reversible isothermal process w = −nRT ln(Vf/Vi). 2 mol of an ideal gas undergoes isothermal compression along three different paths: (i) reversible compression from Pi = 2 bar and Vi = 8 L to Pf = 20 bar; (ii) a single stage compression against a constant external pressure of 20 bar; and (iii) a two stage compression consisting initially of compression against a constant external pressure of 10 bar until Pgas = Pext, followed by compression against a constant pressure of 20 bar until Pgas = Pext.

Question P2-1. Work done (in bar-L) on the gas in reversible isothermal compression is:
(a) 9.212   (b) 36.848   (c) 18.424   (d) None of these

Solution. nRT = PiVi = 2 × 8 = 16 bar L (so T = 100 K with R = 0.080 L bar/mol K).

wrev = −2.303 nRT log(Pi/Pf) = −2.303 × 16 × log(2/20) = +36.848 bar L.

Answer: (b)

Teacher's Note: Use nRT = PiVi = 16 bar L and ln(Vf/Vi) = ln(Pi/Pf).

Exam Note: Work on the gas is positive in compression.

Question P2-2. Work done on the gas in single stage compression is:
(a) 36   (b) 72   (c) 144   (d) None of these

Solution. Vf = nRT/Pf = 16/20 = 0.8 L.

w = −Pext(Vf − Vi) = −20(0.8 − 8) = 144 bar L.

Answer: (c)

Teacher's Note: Single step: constant Pext = 20 bar acts for the whole volume change 8 L to 0.8 L.

Exam Note: Use Pext = 20 bar throughout.

Question P2-3. Total work done on the gas in two stage compression is:
(a) 40   (b) 80   (c) 160   (d) None of these

Solution. Stage 1 (Pext = 10 bar): V = 16/10 = 1.6 L, w1 = −10(1.6 − 8) = 64 bar L.

Stage 2 (Pext = 20 bar): V = 0.8 L, w2 = −20(0.8 − 1.6) = 16 bar L.

Total = 64 + 16 = 80 bar L.

Answer: (b)

Teacher's Note: Compute each stage final volume from nRT/Pext, then add the two work terms.

Exam Note: Add both stages: 64 + 16.

Question P2-4. Order of magnitude of work is:
(a) w1 > w2 > w3   (b) w3 > w2 > w1   (c) w2 > w3 > w1   (d) w1 = w2 = w3

Solution. w1 (reversible) = 36.8, w2 (single stage) = 144, w3 (two stage) = 80 bar L.

So w2 > w3 > w1.

Answer: (c)

Teacher's Note: Reversible compression needs minimum work; more irreversible paths need more work.

Exam Note: Reversible path gives least work on gas.

Level 3: Passage 3

Standard Gibbs energy of reaction (ΔrG°) at a certain temperature can be computed as ΔrG° = ΔrH° − TΔrS°, and the change in the value of ΔrH° and ΔrS° for a reaction with temperature can be computed as: ΔrH°T2 − ΔrH°T1 = ΔrC°p(T2 − T1); ΔrS°T2 − ΔrS°T1 = ΔrC°p ln(T2/T1); and ΔrG° = −RT ln Keq. Consider the reaction CO(g) + 2H2(g) ⇌ CH3OH(g). Given: ΔfH°(CH3OH, g) = −201 kJ/mol; ΔfH°(CO, g) = −114 kJ/mol; S°(CH3OH, g) = 240 J/K mol; S°(H2, g) = 29 J K−1 mol−1; S°(CO, g) = 198 J/mol K; C°p,m(H2) = 28.8 J/mol K; C°p,m(CO) = 29.4 J/mol K; C°p,m(CH3OH) = 44 J/mol K; and ln(320/300) = 0.06; all data at 300 K.

Question P3-1. ΔrS° at 300 K for the reaction is:
(a) 152.6 J/K mol   (b) 181.6 J/K mol   (c) −16 J/K mol   (d) None of these

Solution. ΔrS° = S°(CH3OH) − S°(CO) − 2S°(H2) = 240 − 198 − 2(29) = −16 J/K mol.

Answer: (c)

Teacher's Note: Products minus reactants, with the stoichiometric factor 2 on hydrogen.

Exam Note: Multiply S°(H2) by 2.

Question P3-2. ΔrH° at 300 K for the reaction is:
(a) −87 kJ/mol   (b) 87 kJ/mol   (c) −315 kJ/mol   (d) −288 kJ/mol

Solution. ΔrH° = ΔfH°(CH3OH) − ΔfH°(CO) − 2ΔfH°(H2) = −201 − (−114) − 0 = −87 kJ/mol.

Answer: (a)

Teacher's Note: Elements in standard state have zero formation enthalpy, so H2 drops out.

Exam Note: ΔfH° of H2 is zero.

Question P3-3. ΔrS° at 320 K is:
(a) 155.18 J/mol K   (b) 150.02 J/mol K   (c) 172 J/mol K   (d) None of these

Solution. ΔrC°p = 44 − 29.4 − 2(28.8) = −43 J/K mol.

ΔrS°320 = ΔrS°300 + ΔrC°p ln(320/300) = −16 + (−43)(0.06) = −18.58 J/K mol.

Answer: (d) (−18.58 is not listed).

Teacher's Note: Find ΔrC°p first, then multiply by ln(320/300) = 0.06 as given.

Exam Note: Use the given ln value 0.06.

Question P3-4. ΔrH° at 320 K is:
(a) −288.86 kJ/mol   (b) −289.1 kJ/mol   (c) −87.86 kJ/mol   (d) None of these

Solution. ΔrH°320 = ΔrH°300 + ΔrC°p(T2 − T1) = −87 + (−43)(20)/1000 = −87.86 kJ/mol.

Answer: (c)

Teacher's Note: Kirchhoff law: convert ΔrC°p from J to kJ before adding.

Exam Note: Convert J to kJ before adding.

Question P3-5. ΔrG° at 320 K is:
(a) −48295.2 kJ/mol   (b) −240.85 kJ/mol   (c) 240.85 kJ/mol   (d) −81.91 kJ/mol

Solution. ΔrG°320 = ΔrH°320 − TΔrS°320 = −87.86 − 320(−18.58)/1000 = −87.86 + 5.95 = −81.91 kJ/mol.

Answer: (d)

Teacher's Note: Use the 320 K values of both ΔH and ΔS, with TΔS converted to kJ.

Exam Note: Use 320 K values, not 300 K.

Level 3: Passage 4

Enthalpy of neutralization is defined as the enthalpy change when 1 mole of acid/base is completely neutralized by base/acid in dilute solution. For strong acid and strong base the net chemical change is H+(aq) + OH−(aq) → H2O(l); ΔrH° = −55.84 kJ/mol. ΔH°ionization of aqueous solution of strong acid and strong base is zero. When a dilute solution of a weak acid or base is neutralized, the enthalpy of neutralization is somewhat less because of the absorption of heat in the ionization of the weak acid or base. For weak acid/base: ΔH°neutralization = ΔH°ionization + ΔrH° (H+ + OH− → H2O).

Question P4-1. If the enthalpy of neutralization of CH3COOH by HCl is −49.86 kJ/mol then the enthalpy of ionization of CH3COOH is:
(a) 5.98 kJ/mol   (b) −5.98 kJ/mol   (c) 105.7 kJ/mol   (d) None of these

Solution. (The printed statement says "by HCl"; the neutralizing reagent is a strong base, as the passage formula requires.) ΔHneut = ΔHion + (−55.84), so ΔHion = −49.86 + 55.84 = 5.98 kJ/mol.

Answer: (a)

Teacher's Note: Weak acid neutralization is less exothermic by exactly its ionization enthalpy.

Exam Note: Ionization of weak acid is endothermic (positive).

Question P4-2. What is ΔH° for complete neutralization of strong diacidic base A(OH)2 by HNO3?
(a) −55.84 kJ   (b) −111.68 kJ   (c) 55.84 kJ   (d) None of these

Solution. A(OH)2 gives 2 mol OH−, forming 2 mol H2O: ΔH° = 2 × (−55.84) = −111.68 kJ.

Answer: (b)

Teacher's Note: Strong–strong neutralization releases 55.84 kJ per mole of water formed; diacidic gives two.

Exam Note: Multiply by 2 for a diacidic base.

Question P4-3. Under the same conditions how many mL of 0.1 M NaOH and 0.05 M H2A (strong diprotic acid) solution should be mixed for a total volume of 100 mL to produce the highest rise in temperature?
(a) 25 : 75   (b) 50 : 50   (c) 75 : 25   (d) 66.66 : 33.33

Solution. 0.05 M H2A is 0.1 M in H+. For maximum neutralization (maximum rise in temperature) all H+ and OH− must react, so equal volumes are needed: 50 mL : 50 mL (5 m-mol each).

Answer: (b)

Teacher's Note: Highest heat when H+ and OH− moles are equal; convert diprotic acid to 0.1 M H+.

Exam Note: Compare moles of H+ and OH−.

Level 3: Passage 5

The Gibbs–Helmholtz equation relates the enthalpy, entropy and free energy change of the process at constant P and T as ΔG = ΔH − TΔS. In general the magnitude of ΔH does not change much with the change in temperature but the term TΔS changes appreciably. Hence in some processes spontaneity is very much dependent on temperature and such processes are generally known as entropy driven processes.

Question P5-1. For the reaction at 298 K; A2B4 → 2AB2, ΔH = 2 kJ and ΔS = 20 J/K at constant P and T, the reaction will be:
(a) spontaneous and entropy driven   (b) spontaneous and enthalpy driven   (c) non spontaneous   (d) at equilibrium

Solution. ΔG = ΔH − TΔS = 2000 − 298 × 20 = −3960 J. ΔG is negative, so the reaction is spontaneous; since ΔH is positive, spontaneity comes from the entropy term.

Answer: (a)

Teacher's Note: Positive ΔH with negative ΔG means the TΔS term drives the reaction.

Exam Note: Compare ΔH and TΔS in the same units.

Question P5-2. When CaCO3 is heated to a high temperature it decomposes into CaO and CO2. However it is quite stable at room temperature. It can be explained by the fact that:
(a) ΔrHr dominates the term TΔS at high temperature   (b) The term TΔS dominates the ΔrHr at high temperature   (c) At high temperature both ΔrSr and ΔrHr become negative   (d) Thermodynamics cannot say anything about spontaneity

Solution. The decomposition is endothermic (ΔH positive) with ΔS positive (a gas is formed). At low T, ΔH dominates and ΔG > 0; at high T the TΔS term dominates and ΔG < 0.

Answer: (b)

Teacher's Note: Endothermic decomposition with gas release becomes spontaneous only when TΔS exceeds ΔH.

Exam Note: Link high temperature to the TΔS term.

Question P5-3. The dissolution of CaCl2·6H2O in water is endothermic to the extent of 3.5 kcal mol−1 and ΔH for the reaction CaCl2(s) + 6H2O(l) → CaCl2·6H2O(s) is −23.2 kcal mol−1. Select the correct statement:
(a) ΔHsolution for anhydrous CaCl2 is −19.7 kcal/mol and the process is enthalpy driven   (b) ΔHsolution for anhydrous CaCl2 is −19.7 kcal/mol and the process is entropy driven   (c) Dissolution of CaCl2·6H2O in water is enthalpy driven process   (d) The ΔrS for the reaction CaCl2(s) + 6H2O(l) → CaCl2·6H2O(s) is negative

Solution. ΔHsolution(anhydrous) = ΔH(hydrate formation) + ΔHsolution(hexahydrate) = −23.2 + 3.5 = −19.7 kcal/mol. It is exothermic, so dissolution of anhydrous CaCl2 is enthalpy driven. The hexahydrate dissolves endothermically, so it is entropy driven (option (c) is wrong).

Answer (from key): (a). Remark: option (d) is also chemically true (liquid water becomes part of a solid), but the book key gives (a).

Teacher's Note: Add the hydrate formation enthalpy and the hydrate dissolution enthalpy; negative result means enthalpy driven.

Exam Note: Hess law: −23.2 + 3.5 = −19.7.

Level 3: One or More Answers is/are Correct

Question MC-1. Identify the intensive quantities from the following:
(a) Enthalpy   (b) Temperature   (c) Pressure   (d) Mass

Solution. Enthalpy and mass depend on the amount of matter (extensive); temperature and pressure do not (intensive).

Answer: (b), (c)

Teacher's Note: Intensive properties do not change when the system is divided; extensive ones scale with amount.

Exam Note: Test: does it halve when the system halves?

Question MC-2. Identify the extensive quantities from the following:
(a) Gibbs' energy   (b) Entropy   (c) Refractive index   (d) Specific heat

Solution. Gibbs energy and entropy depend on the amount of substance. Refractive index and specific heat are properties per unit amount (intensive).

Answer: (a), (b)

Teacher's Note: Anything per unit mass or mole, like specific heat, is intensive.

Exam Note: Total G and S are extensive.

Question MC-3. Identify the state functions from the following:
(a) Heat   (b) Work   (c) Enthalpy   (d) Enthalpy change

Solution. Heat and work depend on the path. Enthalpy is a property of the state. The book key accepts only (c); ΔH is a difference of a state function and is path independent between fixed states, but it is not itself a property of one state.

Answer: (c)

Teacher's Note: State functions describe a state; heat and work describe a process. ΔH is a change, not a state property.

Exam Note: Follow the key: only enthalpy is the state function.

Question MC-4. Which of the following statements is/are correct as per IUPAC sign convention?
(a) The work done by the system on the surrounding is negative   (b) The work done by the surrounding on the system is positive   (c) The heat absorbed by the system from the surrounding is positive   (d) The heat absorbed by the surrounding from the system is positive

Solution. IUPAC takes energy entering the system as positive. Work by system is negative, work on system is positive, heat absorbed by system is positive. In (d) the system loses heat, so q is negative.

Answer: (a), (b), (c)

Teacher's Note: IUPAC signs follow what happens to the system: energy gained is positive.

Exam Note: Sign is from the system viewpoint only.

Question MC-5. In an isothermal irreversible expansion of an ideal gas as per IUPAC sign convention:
(a) ΔU = 0   (b) ΔH = 0   (c) w = −nRT ln(P1/P2)   (d) w = −q

Solution. For an ideal gas at constant T, ΔU = 0 and ΔH = 0, so w = −q. The expression in (c) holds only for a reversible isothermal path.

Answer: (a), (b), (d)

Teacher's Note: U and H of ideal gas depend only on T; the log formula is for reversible paths only.

Exam Note: Log expression applies to reversible work only.

Question MC-6. In reversible isothermal ideal gas expansion:
(a) w = 0   (b) U1 = U2   (c) H1 = H2   (d) q = nRT ln(V2/V1)

Solution. Temperature is constant, so U and H do not change; ΔU = q + w = 0 gives q = −w = nRT ln(V2/V1). Work is not zero.

Answer: (b), (c), (d)

Teacher's Note: Isothermal ideal gas: ΔU = ΔH = 0 and heat absorbed equals work done by gas.

Exam Note: Work is nonzero; q equals −w.

Question MC-7. An adiabatic process is that process in which:
(a) energy is transferred as heat   (b) no energy is transferred as heat   (c) ΔU = w   (d) the temp. of gas increases in a reversible adiabatic compression

Solution. Adiabatic means q = 0, so ΔU = w. Compression does work on the gas and raises its temperature.

Answer: (b), (c), (d)

Teacher's Note: With q = 0 all energy exchange is work, so compression heats the gas.

Exam Note: Adiabatic: q = 0, so ΔU = w.

Question MC-8. In adiabatic process, the work involved during expansion or compression of an ideal gas is given by:
(a) nCvΔT   (b) [nR/(γ−1)](T2 − T1)   (c) −nRPext[(T2P1 − T1P2)/(P1P2)]   (d) −2.303 RT log(V2/V1)

Solution. w = ΔU = nCvΔT = nR(T2 − T1)/(γ−1). Also w = −Pext(V2 − V1) = −nRPext(T2/P2 − T1/P1), which equals (c). Option (d) is the isothermal work.

Answer: (a), (b), (c)

Teacher's Note: Adiabatic work equals ΔU; the log formula belongs to isothermal processes.

Exam Note: Do not use the isothermal log formula.

Question MC-9. One mole of an ideal gas is subjected to a two step reversible process (A→B and B→C). The pressure at A and C is same. Mark the correct statement(s). (Figure: P (atm) vs T (K) graph with A = (T 100 K, P 1 atm), B = (600 K, 3 atm), C = (300 K, 1 atm); A to B and B to C are straight lines, A and C lie at the same pressure.)
T (K)P (atm)A (1, 100)B (3, 600)C (1, 300)

(a) Work involved in the path AB is zero   (b) In the path AB work will be done on the gas by the surrounding   (c) Volume of gas at C = 3 × volume of gas at A   (d) Volume of gas at B is 16.42 litres

Solution. V = RT/P. VA = R × 100/1 = 100R; VB = R × 600/3 = 200R; VC = R × 300/1 = 300R. VB > VA, so in AB the gas expands (work done by the gas, not zero). VC = 3VA. VB = 200 × 0.0821 = 16.42 L.

Answer: (c), (d)

Teacher's Note: Use V = RT/P at each point; AB is an expansion, so the gas does the work.

Exam Note: Compute V at A, B, C first.

Question MC-10. Assume ideal gas behaviour for all the gases considered and neglect vibrational degrees of freedom. Separate equimolar samples of Ne, O2, CO2 and SO2 were subjected to a two process as mentioned. Initially all are at same state of temperature and pressure. Step I: all undergo reversible adiabatic expansion to attain same final volume, which is double the original volume thereby causing the decrease in their temperature. Step II: after step I all are given appropriate amount of heat isochorically to restore the original temperature. Mark the correct option(s):
(a) Due to step I only, the decrease in temp. will be maximum for Ne   (b) During step II, heat given will be minimum for SO2   (c) There will be no change in internal energy for any of the gas after both the steps of process are completed   (d) The P–V graph of O2 and CO2 will be same

Solution. Reversible adiabatic: TVγ−1 = constant, so T drop is larger for larger γ. Ne (γ = 5/3) has the largest fall. Heat in step II = CvΔT, i.e. proportional to [1/(γ−1)](1 − 21−γ): Ne 0.555R·T, O2 and CO2 (linear, γ = 7/5) 0.605R·T, SO2 (bent, γ = 4/3) 0.619R·T, so the minimum heat is for Ne, not SO2; (b) is false. Initial and final T are equal, so ΔU = 0 overall. O2 and CO2 are both linear with the same γ, so the P–V graphs coincide.

Answer: (a), (c), (d)

Teacher's Note: Compare γ: larger γ gives larger temperature fall; O2 and CO2 are both linear with same γ.

Exam Note: Ne has highest γ, hence largest cooling.

Question MC-11. Which of the following is/are correct?
(a) ΔH = ΔU + Δ(PV) when P and V both change   (b) ΔH = ΔU + PΔV when pressure is constant   (c) ΔH = ΔU + VΔP when volume is constant   (d) ΔH = ΔU + PΔV + VΔP when P and V both change

Solution. H = U + PV, so ΔH = ΔU + Δ(PV). When both change, Δ(PV) = PΔV + VΔP + ΔPΔV, so (d) misses the ΔPΔV term.

Answer: (a), (b), (c)

Teacher's Note: Expand Δ(PV) fully; the cross term ΔPΔV is the trap in (d).

Exam Note: Δ(PV) has three terms when both change.

Question MC-12. ΔH < ΔE for the reaction(s):
(a) N2(g) + 3H2(g) → 2NH3(g)   (b) Ag2O(s) → 2Ag(s) + ½O2(g)   (c) CO(g) + ½O2(g) → CO2(g)   (d) C(s) + O2(g) → CO2(g)

Solution. ΔH − ΔE = ΔngRT, so ΔH < ΔE when Δng < 0: (a) −2, (c) −1/2. (b) has +1/2 and (d) has 0.

Answer: (a), (c)

Teacher's Note: ΔH − ΔE = ΔngRT; look only at the sign of Δng.

Exam Note: Count gas moles only.

Question MC-13. Which of the following conditions may lead to a non-spontaneous change?
(a) ΔH and ΔS both +ve   (b) ΔH = −ve; ΔS = +ve   (c) ΔH = +ve; ΔS = −ve   (d) ΔH = −ve; ΔS = −ve

Solution. ΔG = ΔH − TΔS. (b) always gives ΔG < 0. (a) can be positive at low T, (c) is always positive, (d) can be positive at high T.

Answer: (a), (c), (d)

Teacher's Note: Only ΔH negative with ΔS positive is spontaneous at all temperatures.

Exam Note: Check ΔG = ΔH − TΔS in each case.

Question MC-14. For a process to be spontaneous:
(a) (ΔGsystem)T,p = 0   (b) ΔSsystem + ΔSsurrounding > 0   (c) ΔSsystem + ΔSsurrounding < 0   (d) (ΔGsystem)T,p < 0

Solution. Spontaneity requires ΔStotal > 0, which is equivalent to ΔGT,p < 0. ΔG = 0 means equilibrium.

Answer: (b), (d)

Teacher's Note: Total entropy must increase; at constant T and p this means ΔG is negative.

Exam Note: ΔG = 0 is equilibrium, not spontaneous.

Question MC-15. The normal boiling point of a liquid X is 400 K. Which of the following statement is true about the process X(l) → X(g)?
(a) at 400 K and 1 atm pressure ΔG = 0   (b) at 400 K and 2 atm pressure ΔG = +ve   (c) at 400 K and 0.1 atm pressure ΔG = −ve   (d) at 410 K and 1 atm pressure ΔG = +ve

Solution. At 400 K and 1 atm, liquid and vapour are in equilibrium (ΔG = 0). At higher pressure the vapour is unfavoured (ΔG > 0); at lower pressure it is favoured (ΔG < 0). At 410 K and 1 atm, above the boiling point, vapourisation is spontaneous (ΔG < 0), so (d) is false.

Answer: (a), (b), (c)

Teacher's Note: Compare conditions with the normal boiling point: higher P or lower T favours liquid.

Exam Note: Above boiling point, vaporisation has ΔG negative.

Question MC-16. When ice melts at 1°C:
(a) an increase in entropy   (b) a decrease in enthalpy   (c) a decrease in free energy   (d) process is spontaneous

Solution. Ice melts spontaneously above 0°C: ΔS > 0, ΔH > 0 (endothermic, so no decrease in enthalpy) and ΔG < 0.

Answer: (a), (c), (d)

Teacher's Note: Melting is endothermic but entropy driven above 0°C.

Exam Note: Melting raises enthalpy; (b) is false.

Question MC-17. The value of ΔHtransition of C (graphite) → C (diamond) is 1.9 kJ/mol at 25°C; entropy of graphite is higher than entropy of diamond. This implies that:
(a) C (diamond) is more thermodynamically stable than C (graphite) at 25°C   (b) C (graphite) is more thermodynamically stable than C (diamond) at 25°C   (c) diamond will provide more heat on complete combustion at 25°C   (d) ΔGtransition of C (diamond) → C (graphite) is −ve

Solution. For graphite → diamond, ΔH = +1.9 and ΔS < 0, so ΔG > 0: graphite is more stable and diamond → graphite has ΔG < 0. Diamond has higher enthalpy, so it releases 1.9 kJ/mol more on combustion.

Answer: (b), (c), (d)

Teacher's Note: Positive ΔH and negative ΔS make ΔG positive; the higher-energy form releases more heat.

Exam Note: Diamond is higher in enthalpy than graphite.

Question MC-18. Which of the following statement(s) is/are false?
(a) All adiabatic processes are isoentropic (or isentropic) processes   (b) When (ΔGsystem)T,p < 0; the reaction must be exothermic   (c) dG = VdP − SdT is applicable for closed system, both PV and non-PV work   (d) The heat of vaporisation of water at 100°C is 40.6 kJ/mol. When 9 gm of water vapour condenses to liquid at 100°C of 1 atm, then ΔSsystem = 54.42 J/K

Solution. (a) False: only reversible adiabatic processes are isentropic. (b) False: ΔG < 0 can occur with ΔH > 0 if TΔS is large. (c) False: it holds for PV work only (reversible, no non-PV work). (d) 0.5 mol condenses, ΔSsystem = −0.5 × 40600/373 = −54.42 J/K, so the positive sign makes it false.

Answer: (a), (b), (c), (d)

Teacher's Note: Check each claim: isentropic needs reversible adiabatic; ΔG sign does not fix ΔH; condensation lowers entropy.

Exam Note: Condensation gives negative ΔSsystem.

Question MC-19. Which of the following statement(s) is/are true?
(a) ΔE = 0 for combustion of C2H6(g) in a sealed rigid adiabatic container   (b) ΔfH°(S, monoclinic) ≠ 0   (c) If dissociation energy of CH4(g) is 1656 kJ/mol and C2H6(g) is 2812 kJ/mol, then value of C–C bond energy will be 328 kJ/mol   (d) If ΔfH(H2O, g) = −242 kJ/mol; ΔvapH(H2O, l) = 44 kJ/mol then, ΔfH°(OH−, aq.) will be −142 kJ/mol

Solution. (a) Rigid and adiabatic: w = 0, q = 0, so ΔE = 0. (b) Rhombic sulphur is the standard state, so monoclinic has nonzero ΔfH°. (c) C–H = 1656/4 = 414; C–C = 2812 − 6 × 414 = 328 kJ/mol. (d) False: ΔfH°(OH−) cannot be found without the enthalpy of the H+ + OH− reaction.

Answer: (a), (b), (c)

Teacher's Note: Use bond-energy averages in (c); only the stable allotrope has zero formation enthalpy.

Exam Note: Rhombic S is the standard state.

Question MC-20. From the following data, mark the option(s) where ΔH is correctly written for the given reaction. Given: H+(aq) + OH−(aq) → H2O(l); ΔH = −57.3 kJ; ΔHsolution of HA(g) = −70.7 kJ/mol; ΔHsolution of BOH(g) = 20 kJ/mol; ΔHionization of HA = 15 kJ/mol and BOH is a strong base.
ReactionΔrH (kJ/mol)
(a) HA(aq) + BOH(aq) → BA(aq) + H2O−42.3
(b) HA(g) + BOH(g) → BA(aq) + H2O−93
(c) HA(g) → H+(aq) + A−(aq)−55.7
(d) B+(aq) + OH−(aq) → BOH(aq)−20

Solution. (a) 15 + (−57.3) = −42.3. (b) −70.7 + 20 + (−42.3) = −93. (c) −70.7 + 15 = −55.7. (d) BOH is a strong base (fully ionized), so B+ + OH− → BOH(aq) has ΔH = 0, not −20.

Answer: (a), (b), (c)

Teacher's Note: Route each reaction through dissolution, ionization and neutralization steps by Hess law.

Exam Note: Strong base: ionization enthalpy is zero.

Question MC-21. Select correct statement(s):
(a) An adiabatic system can exchange energy with its surroundings.   (b) A thermodynamic property which is intensive is additive.   (c) Work done may be zero in a cyclic process.   (d) For a simple compressible substance, the relation dq − P·dv = 0 is true for any cycle involving mechanical work only.

Solution. (a) Energy can cross an adiabatic boundary as work. (b) False: intensive properties are not additive. (c) True (e.g. a cycle with zero net area). (d) For a cycle dU = 0, so dq = −dw = P dv.

Answer: (a), (c), (d)

Teacher's Note: Adiabatic blocks heat only, not work; cyclic processes have ΔU = 0.

Exam Note: Adiabatic does not mean isolated.

Question MC-22. For an isolated system, the entropy:
(a) Either increases or remains constant   (b) Either decreases or remains constant   (c) Can never decrease   (d) Can never increase

Solution. Second law: ΔS ≥ 0 for an isolated system (zero for reversible, positive for spontaneous change).

Answer: (a), (c)

Teacher's Note: Second law for isolated systems: ΔS never negative.

Exam Note: State ΔS ≥ 0 for isolated system.

Question MC-23. The normal boiling point of a liquid X is 400 K. ΔHvap at normal boiling point is 40 kJ/mol. Select correct statement(s):
(a) ΔSvaporisation < 100 J/mol K at 400 K and 2 atm   (b) ΔSvaporisation < 10 J/mol K at 400 K and 1 atm   (c) ΔGvaporisation < 0 at 410 K and 1 atm   (d) ΔU = 43.32 kJ/mol K at 400 K and 1 atm

Solution. ΔSvap at normal boiling point = 40000/400 = 100 J/mol K. At 2 atm the vapour has lower entropy, so ΔSvap < 100. (b) false (it is 100). (c) ΔG = 40000 − 410 × 100 = −1000 J < 0. (d) ΔU = ΔH − RT = 40 − 8.31 × 0.4 = 36.68 kJ/mol, not 43.32.

Answer: (a), (c)

Teacher's Note: At the boiling point ΔS = ΔH/T = 100 J/mol K; at higher pressure the vapour has less entropy.

Exam Note: ΔU = ΔH − RT for one mole of gas.

Question MC-24. Select incorrect statement(s):
(a) A closed system with all adiabatic boundaries must be an isolated system   (b) Total heat exchange in a cyclic process may be zero   (c) Entropy of a closed system is maximum at equilibrium   (d) Molar Gibbs energy is an extensive property

Solution. (a) Incorrect: a closed adiabatic system can still exchange work. (b) Correct. (c) Incorrect: entropy is maximum at equilibrium only for an isolated system. (d) Incorrect: molar Gibbs energy is intensive.

Answer: (a), (c), (d)

Teacher's Note: Closed systems exchange work or heat; maximum entropy applies to isolated systems; molar quantities are intensive.

Exam Note: Watch the "incorrect" wording in the question.

Question MC-25. Select correct statement(s) for the reaction H2O(g) + CO(g) → H2(g) + CO2(g).
SubstanceCO(g)CO2(g)H2O(g)H2(g)
ΔfH°400 (kcal mol−1)−25−95−550
S°400 (cal mol−1 K−1)45504030
(a) Reaction is enthalpy driven   (b) Reaction is entropy driven   (c) Reaction is spontaneous at 400 K   (d) Reaction is non-spontaneous at 400 K

Solution. ΔrH° = 0 − 95 − (−55 − 25) = −15 kcal; ΔrS° = 30 + 50 − 40 − 45 = −5 cal/K; ΔrG° = −15000 − 400(−5) = −13000 cal < 0. Spontaneous and driven by enthalpy (ΔS is negative).

Answer: (a), (c)

Teacher's Note: Negative ΔH and negative ΔS: spontaneous because the enthalpy term wins at 400 K.

Exam Note: Compute ΔH, ΔS and ΔG in same units.

Level 3: Match the Column

Column-I and Column-II contain four entries each. Entries of Column-I are to be matched with some entries of Column-II. One or more than one entries of Column-I may have the matching with the same entries of Column-II.

Question MT-1. Match the entries.
Column-IColumn-II
(A) Reversible cooling of an ideal gas at constant volume(P) w = 0; q < 0; ΔU < 0
(B) Reversible isothermal expansion of an ideal gas(Q) w < 0; q > 0; ΔU > 0
(C) Adiabatic expansion of non-ideal gas into vacuum(R) w = 0; q = 0; ΔU = 0
(D) Reversible melting of sulphur at normal melting point(S) w < 0; q > 0; ΔU = 0

Answer (from key): A → P; B → S; C → R; D → Q

Reasoning. (A) constant volume gives w = 0 and cooling gives q, ΔU < 0. (B) isothermal ideal gas: ΔU = 0, q = −w > 0. (C) free expansion: w = 0, q = 0. (D) melting absorbs heat and sulphur expands slightly, so q > 0, w < 0, ΔU > 0.

Teacher's Note: Fix w, q and ΔU signs from the process condition: constant V, isothermal, vacuum, melting.

Exam Note: Sign each of w, q, ΔU separately.

Question MT-2. Match the entries.
Column-IColumn-II
(A) Adiabatic process(P) q = 0
(B) Isothermal process(Q) ΔH = 0
(C) Isoenthalpic process(R) ΔT = 0
(D) Isentropic process(S) ΔS = 0

Answer (from key): A → P; B → R; C → Q; D → S

Reasoning. The name of each process defines its constant quantity: adiabatic q = 0, isothermal ΔT = 0, isoenthalpic ΔH = 0, isentropic ΔS = 0.

Teacher's Note: Process names state what is held constant.

Exam Note: Match the prefix: iso- means constant.

Question MT-3. Match the entries.
Column-IColumn-II
(A) Reversible isothermal expansion of an ideal gas(P) w = −2.303 nRT log(V2/V1)
(B) Reversible adiabatic compression of an ideal gas(Q) PVγ = constant
(C) Irreversible adiabatic expansion of an ideal gas(R) w = [nR/(γ−1)](T2 − T1)
(D) Irreversible isothermal compression of an ideal gas(S) ΔH = 0

Answer (from key): A → P, S; B → Q, R; C → R; D → S

Reasoning. (A) isothermal reversible work formula and ΔH = 0. (B) reversible adiabatic obeys PVγ = const and w = ΔU = nR(T2 − T1)/(γ−1). (C) irreversible adiabatic: w = ΔU only (PVγ does not apply). (D) isothermal, ideal gas: ΔH = 0.

Teacher's Note: PVγ constant needs reversible adiabatic; w = ΔU holds for any adiabatic path.

Exam Note: PVγ needs reversibility.

Question MT-4. Match the entries.
Column-IColumn-II
(A) PCl5(g) ⇌ PCl3(g) + Cl2(g) in a closed system(P) ΔH < ΔU
(B) 2HI(g) ⇌ H2(g) + I2(g) in a closed system(Q) ΔH = ΔU ≠ 0
(C) N2(g) + 3H2(g) ⇌ 2NH3(g) in a closed system(R) ΔH > ΔU
(D) CO(g) + ½O2(g) ⇌ CO2(g) in an isolated system(S) ΔU = 0

Answer (from key): A → R; B → Q; C → P; D → S

Reasoning. ΔH − ΔU = ΔngRT. (A) Δng = +1, so ΔH > ΔU. (B) Δng = 0, so ΔH = ΔU ≠ 0. (C) Δng = −2, so ΔH < ΔU. (D) isolated system: ΔU = 0.

Teacher's Note: Sign of Δng decides ΔH versus ΔU; an isolated system has ΔU = 0.

Exam Note: Use ΔH − ΔU = ΔngRT.

Question MT-5. Match the entries.
Column-IColumn-II
(A) Reversible isothermal compression of an ideal gas(P) ΔSsystem > 0
(B) Isothermal free expansion (Pext = 0) of an ideal gas(Q) ΔSsystem < 0
(C) Reversible adiabatic expansion of an ideal gas(R) ΔSsystem = 0
(D) Reversible ideal gas expansion(S) Information insufficient

Answer (from key): A → Q; B → P; C → R; D → S

Reasoning. (A) volume falls at constant T: ΔS < 0. (B) volume rises: ΔS > 0. (C) reversible adiabatic: qrev = 0, so ΔS = 0. (D) reversible expansion could be isothermal or adiabatic or other, so ΔS cannot be fixed.

Teacher's Note: ΔS = nR ln(V2/V1) for isothermal; reversible adiabatic gives zero.

Exam Note: Unspecified path means information insufficient.

Question MT-6. Match the entries.
Column-IColumn-II
(A) Reversible isothermal ideal gas expansion(P) ΔSsurrounding = 0
(B) Reversible adiabatic ideal gas compression(Q) ΔSsurrounding < 0
(C) Adiabatic free expansion (Pext = 0) of an ideal gas(R) ΔSsurrounding > 0
(D) Irreversible isothermal ideal gas compression(S) ΔSsystem = 0

Answer (from key): A → Q; B → P, S; C → P; D → R

Reasoning. (A) surroundings give heat to the gas, so ΔSsurr < 0. (B) no heat exchanged and ΔSsys = 0 (reversible adiabatic). (C) q = 0, so ΔSsurr = 0. (D) isothermal compression: gas releases heat to surroundings, ΔSsurr > 0.

Teacher's Note: ΔSsurr = −qsys/T: no heat gives zero, heat released by system gives positive.

Exam Note: Use ΔSsurr = −q/T.

Question MT-7. Match the entries.
Column-IColumn-II
(A) (ΔGsystem)T,P = 0(P) Process is in equilibrium
(B) ΔSsystem + ΔSsurrounding > 0(Q) Process is nonspontaneous
(C) ΔSsystem + ΔSsurrounding < 0(R) Process is spontaneous
(D) (ΔGsystem)T,P > 0(S) System is unable to do useful work

Answer (from key): A → P, S; B → R; C → Q, S; D → Q, S

Reasoning. ΔG = 0 is equilibrium and no useful work is available. ΔStotal > 0 is spontaneous. ΔStotal < 0 or ΔG > 0 means non-spontaneous, so the system cannot do useful work.

Teacher's Note: Spontaneity criteria: ΔStotal > 0 or ΔG < 0; useful work needs ΔG < 0.

Exam Note: Useful work needs negative ΔG.

Question MT-8. Match the entries.
Column-IColumn-II
(A) (ΔGsystem)T,P(P) nR ln(V2/V1)
(B) Work done in reversible isothermal ideal gas expansion(Q) nRT ln(P2/P1)
(C) ΔG for reversible isothermal expansion of an ideal gas(R) −nFE
(D) ΔSgas for isothermal expansion of an ideal gas(S) nR ln(P1/P2)

Answer (from key): A → R; B → Q; C → Q; D → P, S

Reasoning. (A) ΔG = −nFE for an electrochemical cell at constant T, P. (B) w = −nRT ln(V2/V1) = nRT ln(P2/P1). (C) ΔG = nRT ln(P2/P1). (D) ΔS = nR ln(V2/V1) = nR ln(P1/P2).

Teacher's Note: At constant T, V2/V1 = P1/P2, so the same quantity has two forms.

Exam Note: Convert V ratio to inverted P ratio.

Question MT-9. Match the entries.
Column-IColumn-II
(A) Heating of an ideal gas at constant pressure(P) ΔH = nCp,mΔT ≠ 0
(B) Compression of liquid at constant temperature(Q) ΔU = 0
(C) Reversible process for an ideal gas at constant temperature(R) ΔG = VΔP
(D) Adiabatic free expansion of an ideal gas(S) ΔG = nRT ln(P2/P1)

Answer (from key): A → P; B → R; C → Q, S; D → Q, S

Reasoning. (A) ΔH = nCpΔT. (B) dG = V dP at constant T, and V is nearly constant for a liquid. (C) isothermal ideal gas: ΔU = 0 and ΔG = nRT ln(P2/P1). (D) q = w = 0 so ΔU = 0, hence ΔT = 0 and the same ΔG expression applies.

Teacher's Note: At constant T, dG = V dP; for an ideal gas ΔU depends only on T.

Exam Note: Free expansion keeps T constant for ideal gas.

Question MT-10. Match the entries.
Column-IColumn-II
(A) − & − (signs of ΔH and ΔS)(P) Spontaneous only at low temperature
(B) − & +(Q) Spontaneous only at high temperature
(C) + & +(R) Spontaneous at all temperature
(D) + & −(S) Non-spontaneous at all temperature

Answer (from key): A → P; B → R; C → Q; D → S

Reasoning. ΔG = ΔH − TΔS: (−,−) negative only when T is low; (−,+) always negative; (+,+) negative only when T is high; (+,−) always positive.

Teacher's Note: Check ΔG = ΔH − TΔS at low and high T for each sign pair.

Exam Note: Test low and high T for each case.

Question MT-11. Match the entries.
Column-IColumn-II
(A) Reversible adiabatic compression(P) ΔSsystem > 0
(B) Reversible vaporisation of liquid(Q) ΔSsystem < 0
(C) 2N(g) → N2(g)(R) ΔSsurrounding < 0
(D) MgCO3(s) → MgO(s) + CO2(g) (on heating)(S) ΔSsurrounding = 0

Answer (from key): A → S; B → P, R; C → Q; D → P, R

Reasoning. (A) adiabatic: no heat exchange, ΔSsurr = 0. (B) vaporisation raises ΔSsys and the surroundings supply heat, so ΔSsurr < 0. (C) fewer gas moles, ΔSsys < 0. (D) gas is formed (ΔSsys > 0) and the reaction absorbs heat (ΔSsurr < 0).

Teacher's Note: Gas formed raises ΔSsys; endothermic change lowers ΔSsurr.

Exam Note: Use gas moles and heat direction.

Question MT-12. Match the entries.
Column-IColumn-II
(A) H+(aq)(P) ΔfH° = 0
(B) H(g)(Q) ΔfH° ≠ 0
(C) H2(g)(R) ΔfG° = 0
(D) C (s, diamond)(S) ΔfS° < 0

Answer (from key): A → P, R; B → Q; C → P, R; D → Q, S

Reasoning. H+(aq) is defined with zero ΔfH° and ΔfG°; H2(g) is an element in standard state. H(g) has nonzero formation enthalpy (atomisation). Diamond has nonzero ΔfH° and lower entropy than graphite, so ΔfS° < 0.

Teacher's Note: Standard-state elements and H+(aq) have zero ΔfH° and ΔfG°.

Exam Note: Reference states have zero formation values.

Question MT-13. Match the entries.
Column-IColumn-II
(A) (∂U/∂T)V(P) CP
(B) (∂H/∂T)P(Q) CV
(C) (∂G/∂T)P(R) −S
(D) (∂G/∂P)T(S) V

Answer (from key): A → Q; B → P; C → R; D → S

Reasoning. These follow from definitions and dG = V dP − S dT: (∂U/∂T)V = CV, (∂H/∂T)P = CP, (∂G/∂T)P = −S, (∂G/∂P)T = V.

Teacher's Note: Recall dG = V dP − S dT; constant-V derivative of U and constant-P derivative of H give heat capacities.

Exam Note: Memorise these four partial derivatives.

Question MT-14. Match the entries.
Column-IColumn-II
(A) C (s, graphite) + O2(g) → CO2(g)(P) ΔH°combustion
(B) C (s, graphite) → C(g)(Q) ΔH°formation
(C) CO(g) + ½O2(g) → CO2(g)(R) ΔH°atomization
(D) CH4(g) → C(g) + 4H(g)(S) ΔH°sublimation

Answer (from key): A → P, Q; B → Q, R, S; C → P; D → R

Reasoning. (A) graphite burning forms CO2 from elements (combustion and formation). (B) forming C(g) from graphite is formation, atomisation and sublimation. (C) CO burning is combustion only. (D) breaking CH4 fully into atoms is atomisation.

Teacher's Note: Formation starts from elements; atomisation yields gaseous atoms; sublimation is solid to gas.

Exam Note: Check reactants against the definition.

Question MT-15. Match the entries.
Column-IColumn-II
(A) O2(g)(P) ΔfH° = +ve; ΔfS° = +ve
(B) O3(g)(Q) ΔfH° = −ve; ΔfS° = −ve
(C) Br2(g)(R) ΔfH° = +ve; ΔfS° = −ve
(D) H2O(l)(S) ΔfH° = 0; ΔfS° = 0

Answer (from key): A → S; B → R; C → P; D → Q

Reasoning. (A) O2 is the element in standard state: both zero. (B) 3/2 O2 → O3 is endothermic with fewer gas moles. (C) Br2(l) → Br2(g) is endothermic and entropy increases. (D) 2H2 + O2 → H2O(l) is exothermic with fewer gas moles.

Teacher's Note: Judge formation reaction sign from heat release and change in gas moles or phase.

Exam Note: Write the formation reaction first.

Level 3: Assertion-Reason Type Questions

Each question contains STATEMENT-1 (Assertion) and STATEMENT-2 (Reason). Mark the correct answer: (A) both statements are TRUE and STATEMENT-2 is the correct explanation of STATEMENT-1; (B) both statements are TRUE but STATEMENT-2 is NOT the correct explanation of STATEMENT-1; (C) STATEMENT-1 is TRUE and STATEMENT-2 is FALSE; (D) STATEMENT-1 is FALSE and STATEMENT-2 is TRUE.

Question AR-1. STATEMENT-1: Heat and work are "definite quantities".
STATEMENT-2: Heat and work are not properties of a system, their values depend on the path of the process and vary accordingly.

Answer (from key): (D)

Reasoning. Statement-1 is false because heat and work are path dependent and not definite state quantities. Statement-2 is true.

Teacher's Note: Path functions like q and w change with route; only state functions have definite values.

Exam Note: Heat and work are path functions.

Question AR-2. STATEMENT-1: There is no change in internal energy for an ideal gas at constant temperature.
STATEMENT-2: Internal energy of an ideal gas is a function of temperature only.

Answer (from key): (A)

Reasoning. Both true; U depends on T only, so at constant T it cannot change. Statement-2 explains Statement-1.

Teacher's Note: Ideal gas has no intermolecular forces, so U depends only on temperature.

Exam Note: Link: U depends only on T.

Question AR-3. STATEMENT-1: The heat absorbed during the isothermal expansion of an ideal gas against vacuum is zero.
STATEMENT-2: The volume occupied by the molecules of an ideal gas is zero.

Answer (from key): (B)

Reasoning. Against vacuum w = 0 and ΔU = 0 (isothermal ideal gas), so q = 0. Statement-2 is a true assumption of the ideal gas model, but it is not the reason for zero heat.

Teacher's Note: Zero heat comes from w = 0 and ΔU = 0, not from molecular volume.

Exam Note: Reason is w = 0 and ΔU = 0.

Question AR-4. STATEMENT-1: ΔH and ΔE are the same for the reaction N2(g) + O2(g) ⇌ 2NO(g).
STATEMENT-2: All reactants and products are gases where all gases are ideal.

Answer (from key): (B)

Reasoning. Δng = 0, so ΔH = ΔE. Statement-2 is true, but the reason for equality is Δng = 0, not gas ideality alone.

Teacher's Note: ΔH = ΔE when Δng = 0; ideal behaviour is needed but is not the key reason.

Exam Note: Cite Δng = 0 as the reason.

Question AR-5. STATEMENT-1: The magnitude of the work involved in an isothermal expansion is greater than that involved in an adiabatic expansion.
STATEMENT-2: P–V curve (P on y-axis and V on x-axis) decrease more rapidly for reversible adiabatic expansion compared to reversible isothermal expansion starting from same initial state.

Answer (from key): (A)

Reasoning. Both true. The adiabatic curve is steeper, so the area under it (work) is smaller than under the isotherm for the same volume change; Statement-2 explains Statement-1.

Teacher's Note: Work is the area under the P–V curve; the steeper adiabat encloses less area.

Exam Note: Compare areas under isotherm and adiabat.

Question AR-6. STATEMENT-1: Entropy change in reversible adiabatic expansion of an ideal gas is zero.
STATEMENT-2: The increase in entropy due to volume increase just compensate the decrease in entropy due to fall in temperature.

Answer (from key): (A)

Reasoning. qrev = 0 so ΔS = 0; the volume term nR ln(V2/V1) cancels the temperature term nCv ln(T2/T1). Statement-2 explains Statement-1.

Teacher's Note: Isentropic: nCv ln(T2/T1) + nR ln(V2/V1) = 0.

Exam Note: Two entropy terms cancel exactly.

Question AR-7. STATEMENT-1: There cannot be chemical equilibrium in an open system.
STATEMENT-2: There is no fixed mass in an open system.

Answer (from key): (A)

Reasoning. Equilibrium needs fixed amounts of reactants and products; in an open system matter keeps entering or leaving, so Statement-2 explains Statement-1.

Teacher's Note: Matter exchange prevents composition from becoming constant.

Exam Note: Open system exchanges matter, no equilibrium.

Question AR-8. STATEMENT-1: The standard free energy changes of all spontaneously occurring reactions are negative.
STATEMENT-2: The standard free energies of the elements in their standard states at 1 bar and 298 K are taken as zero.

Answer (from key): (B)

Reasoning. Book key is (B): both statements treated as true, with Statement-2 not explaining Statement-1. Caution: strictly, spontaneity is decided by ΔG (not ΔG°), and a spontaneous reaction with K < 1 can have ΔG° > 0.

Teacher's Note: Spontaneity depends on ΔG at actual conditions; ΔG° = −RT ln K can be positive.

Exam Note: Follow key (B); note ΔG vs ΔG°.

Question AR-9. STATEMENT-1: Enthalpy and entropy of any elementary substance in the standard states are taken as zero.
STATEMENT-2: At absolute zero, particles of the perfectly crystalline substance become completely motionless.

Answer (from key): (D)

Reasoning. Statement-1 is false: only the standard enthalpy of formation (and Gibbs energy of formation) of elements is taken as zero; absolute entropy is not zero at 298 K. Statement-2 is the (idealised) third-law picture and is taken as true.

Teacher's Note: Elements have zero formation enthalpy, but absolute entropy is positive above 0 K.

Exam Note: Entropy of elements is not zero at 298 K.

Question AR-10. STATEMENT-1: A reaction which is spontaneous and accompanied by decrease of randomness must be exothermic.
STATEMENT-2: All exothermic reactions are accompanied by decrease of randomness.

Answer (from key): (C)

Reasoning. ΔS < 0 and ΔG < 0 require ΔH < 0, so Statement-1 is true. Statement-2 is false: exothermic reactions may increase randomness.

Teacher's Note: ΔG = ΔH − TΔS; with ΔS negative, ΔH must be negative for spontaneity.

Exam Note: Exothermic does not imply entropy decrease.

Question AR-11. STATEMENT-1: Many endothermic reactions that are not spontaneous at room temperatures become spontaneous at high temperature.
STATEMENT-2: ΔH° of the endothermic reaction increases with increase in temperature.

Answer (from key): (B)

Reasoning. Statement-1 is true because TΔS grows with T. Statement-2 may also be taken as true, but the actual reason is the larger TΔS term, so it does not explain Statement-1.

Teacher's Note: High temperature magnifies the TΔS term, making ΔG negative for ΔS > 0.

Exam Note: Reason is TΔS growing with T.

Question AR-12. STATEMENT-1: Decrease of free energy during the process under constant temperature and pressure provides a measure of its spontaneity.
STATEMENT-2: A spontaneous change must have +ve sign of ΔSsystem.

Answer (from key): (C)

Reasoning. Statement-1 is true: ΔG < 0 at constant T, P means spontaneous. Statement-2 is false: spontaneous processes can have negative ΔSsystem if ΔSsurroundings compensates.

Teacher's Note: Total entropy must rise, not necessarily the system entropy.

Exam Note: ΔSsystem may be negative.

Question AR-13. STATEMENT-1: |ΔfH| of H2O(l) > |ΔfH| of H2O(g).
STATEMENT-2: ΔHcondensation is negative.

Answer (from key): (A)

Reasoning. H2O(g) → H2O(l) releases heat, so ΔfH(l) = ΔfH(g) + ΔHcondensation is more negative. Statement-2 explains Statement-1.

Teacher's Note: Liquid water formation enthalpy equals vapour value plus condensation enthalpy.

Exam Note: Condensation adds extra negative enthalpy.

Question AR-14. STATEMENT-1: All combustion reactions are exothermic.
STATEMENT-2: Enthalpies of products are greater than enthalpies of reactants (ΣνPΔfH(P) > ΣνRΔfH(R)).

Answer (from key): (C)

Reasoning. Statement-1 is true. Statement-2 is false: for exothermic reactions products have lower enthalpy than reactants.

Teacher's Note: Exothermic means H(products) < H(reactants).

Exam Note: Exothermic: products lower in enthalpy.

Question AR-15. STATEMENT-1: Enthalpy of neutralization of CH3COOH by NaOH is less than that of HCl by NaOH.
STATEMENT-2: Enthalpy of neutralization of CH3COOH is less because of the absorption of heat in the ionization process.

Answer (from key): (A)

Reasoning. Weak acid needs energy to ionize, reducing the heat released; Statement-2 explains Statement-1.

Teacher's Note: Part of the heat released is used to ionize the weak acid.

Exam Note: Ionization absorbs heat for weak acids.

Question AR-16. STATEMENT-1: Internal energy of a real gas may change during expansion at constant temperature.
STATEMENT-2: Internal energy of a real gas is a function of temperature and volume.

Answer (from key): (A)

Reasoning. For a real gas U = f(T, V) because of intermolecular forces, so expansion at constant T changes U. Statement-2 explains Statement-1.

Teacher's Note: Real gas has intermolecular attraction, so U depends on volume too.

Exam Note: Real gas: U depends on T and V.

Question AR-17. STATEMENT-1: Work is a state function which is expressed in joule.
STATEMENT-2: Work appears only at the boundary of the system.

Answer (from key): (D)

Reasoning. Statement-1 is false: work is a path function (its unit is joule). Statement-2 is true.

Teacher's Note: Work is energy in transit across the boundary, not a state property.

Exam Note: Work is a path function.

Question AR-18. STATEMENT-1: The expansion of a gas into an evacuated space takes place non-spontaneously.
STATEMENT-2: A process in which all steps cannot be retraced by themselves is called a spontaneous process.

Answer (from key): (D)

Reasoning. Statement-1 is false: free expansion into vacuum is spontaneous. Statement-2 is the usual definition of a spontaneous (irreversible) process and is true.

Teacher's Note: Gas rushes into vacuum on its own; the reverse never happens by itself.

Exam Note: Free expansion is spontaneous.

Level 3: Subjective Problems

Question SP-1. A perfect gas undergoes a reversible adiabatic expansion from (300 K, 200 atm) to (90 K, 10 atm). Find the atomicity of the gas.

Solution. For reversible adiabatic change T2/T1 = (P2/P1)(γ−1)/γ. So 90/300 = (10/200)(γ−1)/γ; ln 0.3/ln 0.05 = 0.402 = (γ−1)/γ, giving γ = 1.67 = 5/3. This is a monatomic gas.

Answer (from key): 1 (monatomic)

Teacher's Note: Use T P(1−γ)/γ constant; γ = 5/3 means atomicity 1.

Exam Note: Convert γ = 5/3 to atomicity 1.

Question SP-2. 5 mole of an ideal gas at temp. T are compressed isothermally from 12 atm to 24 atm. Calculate the value of 10r, where r = (work done along reversible process) / (work done along single step irreversible process). (Given: ln 2 = 0.7)

Solution. Reversible work magnitude = nRT ln(P2/P1) = nRT ln 2. Single step against P2 = 24 atm: |w| = P2(V1 − V2) = nRT(P2/P1 − 1) = nRT. So r = ln 2 = 0.7 and 10r = 7.

Answer (from key): 7

Teacher's Note: Reversible work is nRT ln 2; single-step compression against 24 atm gives nRT.

Exam Note: Ratio is ln 2, so 10r = 7.

Question SP-3. A diatomic ideal gas is expanded according to PV3 = constant, under very high temperature (assume vibration mode active). Calculate the molar heat capacity of gas (in cal/mol K) in this process.

Solution. With vibration active, Cv = (3/2 + 1 + 1)R = 7R/2. For PVn = constant, C = Cv + R/(1 − n) = 7R/2 − R/2 = 3R. With R ≈ 2 cal/mol K, C = 6 cal/mol K.

Answer (from key): 6

Teacher's Note: Active vibration gives Cv = 7R/2; polytropic C = Cv + R/(1−n).

Exam Note: Use R = 2 cal/mol K.

Question SP-4. A heat engine is operating between 500 K to 300 K and it absorbs 10 kcal of heat from 500 K reservoir reversibly per cycle. Calculate the work done (in kcal) per cycle.

Solution. Efficiency = 1 − 300/500 = 0.4, so W = 0.4 × 10 = 4 kcal.

Answer (from key): 4

Teacher's Note: Carnot efficiency 1 − Tc/Th times heat absorbed.

Exam Note: Efficiency uses absolute temperatures.

Question SP-5. In a Carnot cycle involving ideal non-linear triatomic gas, if during adiabatic expansion volume increases from 2 L to 16 L and heat absorbed during isothermal expansion is 8 kcal, calculate magnitude of work done by Carnot engine (in kcal).

Solution. Non-linear triatomic gas: Cv = 3R, γ = 4/3. Tc/Th = (V1/V2)γ−1 = (2/16)1/3 = 1/2. Efficiency = 1/2, so W = 8 × 1/2 = 4 kcal.

Answer (from key): 4

Teacher's Note: Adiabatic TVγ−1 fixes the temperature ratio; γ = 4/3 for non-linear triatomic.

Exam Note: Find temperature ratio from volume ratio.

Question SP-6. Molar heat capacities at constant pressure for A, B and C are 3, 1.5 and 2 J/mol K. The enthalpy of reaction and entropy of reaction, A + 2B → 3C are 20 kJ/mol and 20 J/K mol at 300 K. Calculate ΔG (in kJ/mol) for the reaction ½A + B → (3/2)C.

Solution. ΔrCp = 3(2) − [3 + 2(1.5)] = 0, so ΔH and ΔS do not change with temperature. For the halved reaction ΔH = 10 kJ/mol and ΔS = 10 J/K mol. ΔG = 10 − 300 × 10/1000 = 7 kJ/mol.

Answer (from key): 7

Teacher's Note: ΔrCp = 0, so use 300 K values and halve them for the new equation.

Exam Note: Halve ΔH and ΔS for half equation.

Question SP-7. Standard molar enthalpy of combustion of glucose is −2880 kJ. If only 25% of energy is available for muscular work and 1.0 km walk consumes 90 kJ of energy, what maximum distance (in km) a person can walk after eating 90 g of glucose.

Solution. 90 g glucose = 0.5 mol (molar mass 180). Energy = 0.5 × 2880 = 1440 kJ. Available = 25% = 360 kJ. Distance = 360/90 = 4 km.

Answer (from key): 4

Teacher's Note: Convert grams to moles, take 25% of the energy, divide by energy per km.

Exam Note: Molar mass of glucose is 180.

Question SP-8. Given C2H2(g) + H2(g) → C2H4(g): ΔH° = −175 kJ mol−1; ΔfH°(C2H4, g) = 50 kJ mol−1; ΔfH°(H2O, l) = −280 kJ mol−1; ΔfH°(CO2, g) = −390 kJ mol−1. If ΔH° is enthalpy of combustion (in kJ mol−1) of C2H2(g), then calculate the value of |ΔH°/280|.

Solution. ΔfH°(C2H2) = 50 + 175 = 225 kJ/mol. C2H2 + 5/2 O2 → 2CO2 + H2O(l): ΔH° = 2(−390) + (−280) − 225 = −1285 kJ/mol. |ΔH°/280| = 4.59, which rounds to 5 (the integer asked).

Answer (from key): 5 (computed 4.59, rounded to nearest integer)

Teacher's Note: Get ΔfH of acetylene from hydrogenation data, then apply products minus reactants.

Exam Note: Round 4.59 to nearest integer 5.

Question SP-9. The integral enthalpies of solution of anhydrous CuSO4(s) and hydrated CuSO4·5H2O(s) are −70 kJ and 10 kJ per mol respectively. Determine the magnitude of enthalpy of hydration of 0.1 mole anhydrous CuSO4(s) as CuSO4(s) + 5H2O(l) → CuSO4·5H2O(s).

Solution. Hydration enthalpy per mole = ΔHsol(anhydrous) − ΔHsol(hydrate) = −70 − 10 = −80 kJ/mol. For 0.1 mol: −8 kJ; magnitude 8.

Answer (from key): 8

Teacher's Note: Hess cycle: anhydrous dissolving equals hydration plus hydrate dissolving.

Exam Note: Multiply by 0.1 mol at the end.

Question SP-10. If enthalpy of neutralisation of HCl by NaOH is −57 kJ mol−1 and with NH4OH is −50 kJ mol−1. Calculate enthalpy of ionisation of NH4OH(aq).

Solution. ΔHneut(weak base) = ΔHion + ΔHneut(strong): −50 = ΔHion − 57, so ΔHion = 7 kJ/mol.

Answer (from key): 7

Teacher's Note: Difference between strong and weak neutralization enthalpy is the ionization enthalpy.

Exam Note: Subtract −57 from −50.

Question SP-11. Lattice energy of NaCl(s) is −790 kJ mol−1 and enthalpy of hydration is −785 kJ mol−1. Calculate enthalpy of solution of NaCl(s).

Solution. Dissolving requires breaking the lattice (+790 kJ/mol) and then hydrating the ions (−785 kJ/mol): ΔHsol = +790 − 785 = +5 kJ/mol.

Answer (from key): 5

Teacher's Note: ΔHsolution = −(lattice energy) + hydration enthalpy when lattice energy is quoted as exothermic.

Exam Note: Lattice energy sign: formation is exothermic.

Question SP-12. x g sample of NH4NO3 is decomposed in a Bomb calorimeter. The temperature of calorimeter increases by 4°C. The heat capacity of the system is 1.25 kJ/°C. Calculate the value of x. Given molar heat of decomposition of NH4NO3 is 400 kJ mol−1.

Solution. Heat = 1.25 × 4 = 5 kJ. Moles = 5/400 = 0.0125 mol. Mass = 0.0125 × 80 = 1 g.

Answer (from key): 1

Teacher's Note: Heat from calorimeter equals moles times molar heat; NH4NO3 molar mass is 80.

Exam Note: Molar mass of NH4NO3 = 80.

Question SP-13. A heat engine operating between 227°C and 77°C absorbs 10 kcal of heat from 227°C reservoir reversibly per cycle. Calculate total work done (in kcal) in two cycles.

Solution. Th = 500 K, Tc = 350 K. Efficiency = 150/500 = 0.3, so work per cycle = 3 kcal and two cycles = 6 kcal.

Answer (from key): 6

Teacher's Note: Convert to kelvin; efficiency 0.3 gives 3 kcal per cycle.

Exam Note: Two cycles: double the per-cycle work.

Question SP-14. Calculate work done in chemical reaction (in kcal): A(s) + 3B(g) → C(l) at 227°C at 1 atm in closed vessel.

Solution. Δng = −3. w = −ΔngRT = 3 × 2 × 500 = 3000 cal = 3 kcal (work done on the system, magnitude 3).

Answer (from key): 3

Teacher's Note: Work equals −ΔngRT with T = 500 K and R = 2 cal.

Exam Note: Use R = 2 cal and T = 500 K.

Question SP-15. One mole ideal monoatomic gas is heated according to path AB and AC. If temperature of state B and state C are equal, calculate (qAC/qAB) × 10. (Figure: P–V diagram; AB is a horizontal line at constant pressure from A to B; AC is a straight line from A to C passing through the origin if extended; TB = TC.)
VPABC

Solution. AB is isobaric: Cm = Cp = 5R/2. AC is the line P ∝ V (n = −1): Cm = Cv + R/(1 − n) = 3R/2 + R/2 = 2R. With the same temperature rise, qAC/qAB = 2R/(5R/2) = 0.8, so ×10 = 8.

Answer (from key): 8

Teacher's Note: Path AC with P ∝ V is polytropic, C = 2R; AB isobaric Cp = 5R/2.

Exam Note: Same ΔT means ratio of heat capacities.

JEE Mathematics: Narendra Awasthi Solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 4 Thermodynamics Part 2

Download Narendra Awasthi Solutions for JEE

Access the complete chapter-wise PDF for Narendra Awasthi Solutions Physical Chemistry Chapter 4 Thermodynamics Part 2. These structured Narendra Awasthi Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.