MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 a Alkyl Halides

Step-by-Step MS Chauhan Solutions for JEE Chemistry Chapter 05 a Alkyl Halides

Review structured textbook solutions for JEE Chemistry Chapter 05 a Alkyl Halides prepared by MS Chauhan. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Download Chapter 05 a Alkyl Halides Textbook Solutions PDF

Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.

MS Chauhan Advanced Problems in Organic Chemistry - Chapter 5A Alkyl Halides: Substitution Reactions (SN1, SN2, SNi) - Level 1 and Level 2

Level 1

Question 1.1. Which of the following is not expected to be an intermediate of the reaction 1-iodo-1-methylcyclohexane + H2O → 1-methylcyclohexanol? (a) the primary cyclohexylmethyl cation (CH2+ on the ring); (b) a secondary ring cation on the carbon next to the methyl-bearing carbon; (c) the protonated alcohol (tertiary R-OH2+); (d) the tertiary 1-methylcyclohexyl cation.

Solution. Answer (from key): (a). The reaction is SN1: the iodide ionises to the tertiary 1-methylcyclohexyl cation (d), water attacks to give the protonated alcohol (c), which loses H+. The primary cation (a) is far less stable and is not formed.

Teacher's Note: SN1 proceeds through the most stable carbocation, here tertiary; primary cations are not expected.

Exam Note: Name the tertiary cation as the intermediate.

Question 1.2. 2-Bromo-3-methylpentane drawn as a Fischer projection (C2: CH3 on top, Br left, H right; C3: H left, CH3 right, CH2CH3 at the bottom) is treated with NaI in acetone. The SN2 product is: (a) I left / H right at C2, C3 unchanged; (b) H left / I right at C2, C3 unchanged; (c), (d) other diastereomers with a changed C3 or a different carbon skeleton.

Solution. Answer (from key): (b). SN2 proceeds with inversion at the carbon bearing Br only, so I enters on the side opposite to where Br was: Br was on the left, so I appears on the right and H moves to the left. C3 is untouched (H left, CH3 right).

Teacher's Note: In a Fischer projection, SN2 inversion swaps the nucleophile to the opposite side from the leaving group.

Exam Note: Invert only the reacting stereocentre.

Question 1.3. Rate of SN2 will be negligible in: (a) bromocyclohexane (Br on a ring carbon, drawn without extra substituent); (b) a ring bromide with a C=C in the ring; (c) 1-bromobicyclo[2.2.1]heptane (bridgehead Br); (d) bromocyclohexane.

Solution. Answer (from key): (c). In a bridgehead bromide the back side of the C-Br bond lies inside the cage, so the nucleophile cannot approach from the rear and the carbon cannot become planar; SN2 is practically impossible.

Teacher's Note: SN2 needs rear-side approach; bridgehead carbons in small bicyclics have none.

Exam Note: Cite blocked backside attack at bridgehead.

Question 1.4. What is the major product when 2-bromobenzyl bromide (benzene ring with Br and CH2Br ortho) reacts with NH3 in ethanol? (a) 2-bromobenzylamine; (b) 2-aminobenzyl bromide; (c) 2-aminobenzylamine; (d) benzylamine.

Solution. Answer (from key): (a). The benzylic C-Br undergoes SN2 with NH3 to give ArCH2NH2. The aryl C-Br is unreactive under these conditions.

Teacher's Note: Benzylic halides undergo substitution easily; aryl halides do not.

Exam Note: Substitute only the CH2Br bromine.

Question 1.5. Cl-CH2-C(CH3)2-CH2-CH2-Cl + I- (DMF). The major product is: (a) I-CH2-C(CH3)2-CH2CH2-Cl; (b) Cl-CH2-C(CH3)2-CH2CH2-I; (c) and (d) elimination products with a C=C.

Solution. Answer (from key): (b). The reaction is SN2 in a dipolar aprotic solvent. The neopentyl-type chloride (a) is hindered by the quaternary carbon next to it, so I- replaces the unhindered primary Cl at the other end.

Teacher's Note: Neopentyl halides are inert to SN2; the unhindered end reacts instead.

Exam Note: Choose the less hindered primary carbon.

Question 1.6. Which expression is representative of the rate law for an SN2 reaction? (a) Rate = k[electrophile]; (b) Rate = k[electrophile][nucleophile]; (c) Rate = k[nucleophile]2; (d) Rate = k[electrophile]2.

Solution. Answer (from key): (b). SN2 is bimolecular: both substrate and nucleophile are present in the single rate-determining step, so the rate is first order in each.

Teacher's Note: SN2 means bimolecular and second order overall.

Exam Note: Write rate = k[RX][Nu].

Question 1.7. A fluorine- and bromine-substituted cyclopentane (Br on one ring carbon, F on the adjacent carbon, with H atoms as drawn) is treated with NaI (1 mole) in acetone to give (A), the major product. Options: (a) I replaces Br with the same orientation as Br (retention); (b) I replaces Br on the opposite face (inversion), F unchanged; (c) I replaces F, Br retained; (d) a different arrangement of I and F.

Solution. Answer (from key): (b). I- is an excellent nucleophile and Br- is a far better leaving group than F-. SN2 therefore replaces Br, with inversion of configuration, and the strong C-F bond is untouched.

Teacher's Note: C-F is too strong to break; Br is replaced by SN2 with inversion.

Exam Note: Show inversion at the C-Br carbon only.

Question 1.8. Which of the following alkyl halides undergo rearrangement in an SN1 reaction? (a) CH3-C(CH3)2-CHI-CH3 (2-iodo-3,3-dimethylbutane); (b) 1-chloro-2-methylcyclohexane; (c) a spiro-ring iodide; (d) all of these.

Solution. Answer (from key): (d). (a) the 2° cation shifts a methyl group to give a 3° cation; (b) the 2° cation shifts the neighbouring tertiary hydrogen to give a 3° cation; (c) the secondary cation next to the spiro/strained ring rearranges by ring expansion to a more stable cation. All three rearrange.

Teacher's Note: A 2° carbocation rearranges by 1,2-H, 1,2-alkyl shift or ring expansion to a more stable one.

Exam Note: Identify the shift that gives the 3° cation.

Question 1.9. Arrange the following three chlorides in decreasing order towards SN1 reactivity: (1) a primary alkyl chloride; (2) a secondary allylic chloride (CH2=CH-CHCl-CH3 type); (3) a secondary alkyl chloride. (a) 1 > 2 > 3; (b) 2 > 3 > 1; (c) 2 > 1 > 3; (d) 3 > 2 > 1.

Solution. Answer (from key): (b) 2 > 3 > 1. The secondary allylic chloride gives a resonance-stabilised allylic cation, the secondary alkyl chloride gives an ordinary 2° cation, and the primary chloride gives an unstable primary cation.

Teacher's Note: SN1 rate follows carbocation stability: allylic/benzylic > tertiary > secondary > primary.

Exam Note: Rank by cation stability.

Question 1.10. Which compound undergoes nucleophilic substitution with NaCN at the fastest rate? Four primary or secondary bromides are drawn: (a) an unhindered primary bromide with branching remote from the C-Br carbon; (b) a more hindered secondary bromide; (c) a primary bromide with branching at the β position; (d) a primary bromide with β,β-branching.

Solution. Answer (from key): (a). With CN-, substitution is SN2, which is fastest for the least hindered carbon. Branching next to the reacting carbon in (b), (c), (d) slows the attack.

Teacher's Note: SN2 rate falls steeply with branching near the C-X carbon.

Exam Note: Pick the least hindered primary bromide.

Question 1.11. Rank the following in order of decreasing rate of solvolysis with aqueous ethanol (fastest to slowest): (1) H2C=C(CH3)-Br (vinyl bromide); (2) 1-bromo-1-methylcyclohexane; (3) CH3-CHBr-CH2-CH(CH3)2. (a) 2 > 1 > 3; (b) 1 > 2 > 3; (c) 2 > 3 > 1; (d) 1 > 3 > 2.

Solution. Answer (from key): (c) 2 > 3 > 1. Solvolysis is SN1: tertiary (2) > secondary (3) > vinyl (1); the vinyl bromide cannot ionise because the vinyl cation is extremely unstable.

Teacher's Note: Solvolysis rate tracks carbocation stability; vinyl halides are essentially inert.

Exam Note: Order: tertiary, secondary, vinyl.

Question 1.12. The reaction of 4-bromobenzyl chloride with sodium cyanide in ethanol leads to the formation of: (a) 4-bromobenzyl cyanide; (b) 4-cyanobenzyl chloride; (c) 4-cyanobenzyl cyanide; (d) 4-bromo-2-cyanobenzyl chloride.

Solution. Answer (from key): (a). CN- displaces the benzylic chloride (SN2). The aryl bromide is not attacked because sp2 C-Br bonds do not undergo ordinary nucleophilic substitution.

Teacher's Note: Only the benzylic halide is reactive; the ring halogen stays.

Exam Note: Replace CH2Cl, keep ring Br.

Question 1.13. Which of the following reactants will not favour nucleophilic substitution? (a) 1-bromobicyclo[2.2.1]heptane (bridgehead bromide); (b) bromobenzene, Ph-Br; (c) (CH3)3C-CH2-Br (neopentyl bromide); (d) all the above.

Solution. Answer (from key): (d). (a) has no backside access and cannot form a planar cation; (b) is an aryl halide; (c) neopentyl is too hindered for SN2 and forms only an unstable primary cation for SN1.

Teacher's Note: Bridgehead, aryl and neopentyl halides are all poor in both SN1 and SN2.

Exam Note: Give the reason for each of the three.

Question 1.14. 9-Bromotriptycene-type bridgehead bromide (I) is treated with OH- to give the corresponding alcohol (II). The conversion of I to II: (a) takes place by SN1; (b) takes place by SN2; (c) takes place by both SN1 and SN2; (d) does not take place.

Solution. Answer (from key): (d). The Br sits on a rigid bridgehead carbon. A cation there cannot become planar (no SN1) and the back side is blocked by the ring system (no SN2), so no substitution occurs.

Teacher's Note: Rigid bridgehead carbons cannot flatten or be attacked from behind.

Exam Note: Say both SN1 and SN2 are blocked.

Question 1.15. Which is the correct reaction coordinate diagram for the solvolysis of the optically active tertiary bromide (1-bromo-1-methylcyclohexane with defined stereochemistry elsewhere on the ring) in H2O giving two alcohols (retention and inversion)? Four two-hump energy profiles (a)-(d) are given, differing in the relative heights of the two barriers and the energy of the intermediate.

Solution. Answer (from key): (b). SN1 solvolysis has two steps. Ionisation to the carbocation is slow, so the first barrier is higher, the carbocation intermediate lies in a well above the reactants, and the second step (attack by water) has a smaller barrier. The diagram in (b) shows this pattern.

Teacher's Note: SN1: first (ionisation) barrier is highest and the cation is a shallow intermediate.

Exam Note: Draw first peak higher than second.

Question 1.16. A 2-phenylethyl tosylate with 14C label at the CH2 carrying OTs (the benzylic CH2 unlabelled) is treated with RCO2H. The product of this reaction is: (a) the ester with the label on the carbon bearing OCOR; (b) the ester with the label on the carbon next to the ring; (c) both (a) and (b); (d) none of these.

Solution. Answer (from key): (c). The aryl group participates (neighbouring-group participation) as the tosylate leaves, forming a bridged phenonium ion in which the two CH2 carbons become equivalent. RCO2H can open the ring at either carbon, so the label ends up at both positions.

Teacher's Note: A phenyl group two atoms from the leaving group forms a phenonium bridge and scrambles the label.

Exam Note: Mention phenonium ion for label scrambling.

Question 1.17. 1-Iodo-2-methylbenzene (o-iodotoluene) with NBS gives (A); (A) with CH3SNa gives (B). Product (B) is: (a) o-iodobenzyl methyl sulphide (ArCH2-S-CH3, I retained); (b) 2-iodothioanisole (S-CH3 directly on the ring); (c) 2-(methylthio)benzyl bromide; (d) none of these.

Solution. Answer (from key): (a). NBS brominates the benzylic CH3 (radical substitution) to give o-iodobenzyl bromide (A). CH3S- then displaces the benzylic bromide by SN2 and the aryl iodide is unchanged.

Teacher's Note: NBS targets the benzylic position; the thiolate then substitutes the benzylic bromide.

Exam Note: Show NBS then SN2 steps.

Question 1.18. Which of the following represents the correct graph for an SN2 reaction? Four plots of log(rate) against CH3-Br, Et-Br, i-Pr-Br, t-Bu-Br: (a) a curve falling steadily; (b) a horizontal line; (c) a curve rising steeply; (d) a wave (up, down, up).

Solution. Answer (from key): (a). SN2 rate decreases steadily as the alkyl group becomes more branched (CH3 > 1° > 2° >> 3°) because of increasing steric hindrance, so the falling curve is correct.

Teacher's Note: SN2 reactivity order is methyl > primary > secondary >> tertiary.

Exam Note: State the falling trend with branching.

Question 1.19. Which of the following graphs represents the correct graph for an SN1 reaction? Same four plots (a)-(d) of log(rate) against CH3-Br, Et-Br, i-Pr-Br, t-Bu-Br as in the previous question.

Solution. Answer (from key): (c). SN1 rate rises with carbocation stability (CH3 < 1° < 2° << 3°), giving a curve that increases sharply toward t-Bu-Br.

Teacher's Note: SN1 is the mirror image of SN2: tertiary reacts fastest.

Exam Note: State the rising trend toward tertiary.

Question 1.20. Which of the following is most reactive toward SN2? Four benzyl chlorides: (a) p-methylbenzyl chloride; (b) benzyl chloride; (c) p-chlorobenzyl chloride; (d) p-nitrobenzyl chloride.

Solution. Answer (from key): (d). The strongly electron-withdrawing p-NO2 group makes the benzylic carbon more electrophilic and stabilises the SN2 transition state, so p-nitrobenzyl chloride reacts fastest; the donor CH3 group is the slowest.

Teacher's Note: Electron-withdrawing groups increase SN2 reactivity of benzylic halides.

Exam Note: Rank by electron-withdrawing ability.

Question 1.21. Among the given pairs, in which pair does the first compound react faster than the second in an SN1 reaction? (a) 1-bromobutane or 2-bromobutane; (b) CH3-C(CH3)(Br)-CH2CH3 or CH3-CHBr-CH(CH3)2; (c) bromocyclohexane or 3-bromocyclohexene; (d) t-butyl bromide or t-butyl iodide.

Solution. Answer (from key): (b). In (b) the first is tertiary and the second secondary, so the first forms the more stable carbocation. In (a) the second (2°) is faster, in (c) the allylic bromide is faster, in (d) the iodide is the better leaving group.

Teacher's Note: Compare cation stability first, then leaving-group ability.

Exam Note: Check each pair one factor at a time.

Question 1.22. What is the major product of CH2=CH-CH2-OH with excess HBr? (a) CH3-CHBr-CH2Br; (b) CH2=CH-CH2Br; (c) CH3-CHBr-CH2-OH; (d) CH3-CH(OH)-CH2OH.

Solution. Answer (from key): (a). Excess HBr does two things: it adds across the C=C (Markovnikov, Br on C2) and converts the primary alcohol into the bromide via the protonated alcohol, giving 1,2-dibromopropane.

Teacher's Note: Excess HBr both adds to the alkene and replaces the OH.

Exam Note: Count both the addition and the substitution.

Question 1.23. SN1 and SN2 products are the same (excluding stereoisomers) with: (a) a ring chloride where rearrangement can occur; (b) a tertiary ring chloride (1-chloro-1-methylcyclohexane type); (c) 4-chloro-1-methylcyclohexane type secondary chloride (Cl at C4 with the methyl on the ring); (d) Ph-CH(CH3)-CHCl-CH3.

Solution. Answer (from key): (c). Only the secondary ring chloride in (c) can react by either path without rearranging, so both routes give the same constitution. (b) is tertiary (no SN2); in (a) and (d) the SN1 cation rearranges to a different, more stable cation.

Teacher's Note: Same product needs both paths available and no carbocation rearrangement.

Exam Note: Exclude rearranging and tertiary substrates.

Question 1.24. Consider the nucleophilic attacks given below. Select in each pair the one showing the greater SN2 rate. (A) (I) a secondary alkyl bromide + CN-, or (II) the corresponding acetate ester + CN-; (B) (III) CH3Br + HS-, or (IV) CH3Br + CH3SH; (C) (V) bromocyclohexane + Cl-, or (VI) bromocyclohexane + I- in DMSO; (D) (VII) bromocyclohexane + Cl-, or (VIII) bromocyclohexane + I- in methanol. Options: (a) I; IV; VI; VIII; (b) II; III; V; VIII; (c) I; III; V; VIII; (d) I; III; V; VII.

Solution. Answer (from key): (c) I; III; V; VIII. (A) Br- is a far better leaving group than acetate: (I). (B) HS- is much more nucleophilic than neutral CH3SH: (III). (C) the key selects (V), Cl-, as the faster pair, since Cl- is the stronger nucleophile of the two in a dipolar aprotic solvent. (D) in protic methanol I- is less solvated and so the stronger nucleophile: (VIII).

Teacher's Note: Good leaving group, anionic nucleophile; halide order flips between aprotic and protic solvents.

Exam Note: Apply solvent effect to halide nucleophilicity.

Question 1.25. Which of the two stereoisomers of 4-t-butylcyclohexyl iodide (127I) will undergo SN2 substitution with 128I- faster, and why? (A) the isomer with I equatorial; (B) the isomer with I axial. (a) A reacts faster because it is the more stable isomer; (b) A reacts faster because it yields a more stable product, the transition state energy being the same for both; (c) A reacts faster because the approach of 128I- can proceed unhindered; (d) B reacts faster because it is less stable than A, the transition state energy being the same for both.

Solution. Answer (from key): (d). The bulky t-butyl group locks the ring. In B the iodine is axial, so the back side (equatorial direction) is open; B is also less stable (1,3-diaxial strain) and is raised in energy, while both reactions share a similar transition state, so B has the smaller activation barrier and reacts faster.

Teacher's Note: An axial leaving group is less stable and has an unhindered backside, so it reacts faster in SN2.

Exam Note: Say axial leaving group, less stable reactant.

Question 1.26. (Z)-2-Butene reacts with Br2/H2O. The resulting bromohydrin when treated with methoxide in methanol undergoes an intramolecular SN2 reaction. Taking into consideration the stereochemical consequences of the mechanism, choose the final product(s): three epoxides (I), (II), (III) of 2,3-dimethyloxirane are drawn. (a) (I) only; (b) (II) only; (c) (III) only; (d) equal amounts of (I) and (II).

Solution. Answer (from key): (d). Anti addition of Br and OH across the Z-alkene gives a racemic pair of bromohydrins. Intramolecular SN2 (inversion at the C-Br carbon) then closes the epoxide, giving trans-2,3-dimethyloxirane as a racemate: equal amounts of the two enantiomers (I) and (II). The meso cis epoxide (III) is not formed.

Teacher's Note: Halohydrin route: anti addition then inversion gives the epoxide with geometry opposite to the alkene.

Exam Note: Two inversions give racemic trans epoxide.

Question 1.27. Rank the following species in order of decreasing nucleophilicity in a polar protic solvent (most to least nucleophilic): (1) CH3CH2CH2O-; (2) CH3CH2CH2S-; (3) CH3CH2COO-. (a) 3 > 1 > 2; (b) 2 > 3 > 1; (c) 1 > 3 > 2; (d) 2 > 1 > 3.

Solution. Answer (from key): (d) 2 > 1 > 3. The thiolate is large, polarisable and weakly solvated by protic solvents, so it is the best nucleophile. The alkoxide is more basic and nucleophilic than the resonance-stabilised carboxylate, the weakest of the three.

Teacher's Note: In protic solvents, polarisable sulphur beats oxygen; delocalised anions are weakest.

Exam Note: Order S- > O- > carboxylate.

Question 1.28. Identify the products of the given reactions with CH3CO2Na/CH3CO2H. Reaction-1: cis-2-(dimethylamino)cyclopentyl tosylate (OTs and NMe2 both wedged). Reaction-2: trans-2-(dimethylamino)cyclopentyl tosylate (OTs hashed, NMe2 wedged). (a) Reaction-1 gives the single trans acetate (OAc hashed, NMe2 wedged); Reaction-2 gives the same trans acetate plus its enantiomer; (b) the reverse of (a); (c) a single product in both reactions; (d) a single (cis) product in both reactions.

Solution. Answer (from key): (a). In the cis isomer the NMe2 group is on the same face as OTs and cannot attack from the back, so acetate displaces OTs directly with inversion to give one trans product. In the trans isomer NMe2 attacks from the back (anchimeric assistance) to form an aziridinium ion; acetate then opens it at either carbon, giving the trans acetate (net retention) together with its enantiomer.

Teacher's Note: Neighbouring NMe2 works only when trans to the leaving group, giving retention through an aziridinium ion.

Exam Note: Compare cis and trans geometry for participation.

Question 1.29. A graph of log(rate) against CH3-X, Me-CH2-X, Me2CH-X, Me3C-X shows a U-shaped combined curve made of curve B (falling from left, reaching a minimum) and curve A (rising towards the right). Which is true about graphs A and B? (a) A → SN1, B → SN2; (b) A → SN2, B → SN1; (c) A and B → E1; (d) A and B → E2.

Solution. Answer (from key): (a). Curve B falls as branching increases (steric hindrance), which is SN2 behaviour. Curve A rises with branching (more stable carbocation), which is SN1 behaviour. The observed rate is the sum, giving a minimum at the 1°/2° halides.

Teacher's Note: Falling with branching means SN2; rising with branching means SN1.

Exam Note: Match each curve's trend to its mechanism.

Question 1.30. In each group, which is the strongest nucleophile? (I) (1) CH3O-; (2) a primary alkoxide (RCH2O-); (3) CH3S- in CH3OH. (II) (1) OH-; (2) H2O; (3) NH2- in DMF. (III) (1) a secondary alkoxide; (2) t-butoxide; (3) CH3O- in DMSO. Options: (a) I,3; II,3; III,2; (b) I,2; II,1; III,3; (c) I,1; II,2; III,1; (d) I,3; II,3; III,3.

Solution. Answer (from key): (d) I,3; II,3; III,3. (I) thiolate is far more nucleophilic than alkoxides in a protic solvent; (II) NH2- is a strong, unsolvated nucleophile in dipolar aprotic DMF, much stronger than OH- or H2O; (III) bulky alkoxides are poorer nucleophiles, and CH3O- in aprotic DMSO is naked and unhindered.

Teacher's Note: Nucleophilicity rises with negative charge, polarisability, low hindrance and aprotic solvent.

Exam Note: State the factor for each group.

Question 1.31. PhSO2-(CH2)4-CH2-Cl is treated with NaNH2 in dimethoxyethane. The major product (A) is: (a) PhSO2-(CH2)3-CH=CH2; (b) cyclopentyl phenyl sulphone (PhSO2 on a cyclopentane ring); (c) PhSO2-(CH2)4-CH2-NH2; (d) none of these.

Solution. Answer (from key): (b). The CH2 next to the sulphonyl group is acidic, so NaNH2 removes an α-proton to give a carbanion. This carbanion attacks the C-Cl carbon four atoms away in an intramolecular SN2 to close a five-membered ring (cyclopentyl phenyl sulphone).

Teacher's Note: α-Sulphonyl carbanion plus a halide five atoms away gives a favourable 5-membered ring.

Exam Note: Show carbanion then intramolecular SN2.

Question 1.32. Which of the following reactions is an elimination reaction? (a) cyclohexanol + H2SO4 → cyclohexene + H2O; (b) trans-1,2-dibromocyclohexane + KI → cyclohexene + IBr + KBr; (c) bromocyclohexane + NaOCH3 → methoxycyclohexane; (d) both (a) and (b).

Solution. Answer (from key): (d). (a) is acid-catalysed dehydration, an elimination. (b) is the anti-elimination of two bromines by I-, also an elimination. (c) as drawn is a substitution (OCH3 replaces Br).

Teacher's Note: Elimination forms a C=C and loses two groups; substitution swaps one group for another.

Exam Note: Identify loss of two groups forming C=C.

Question 1.33. 2-Furfuryl chloride (2-chloromethylfuran) is treated with CH3ONa/CH3OH (SN1 conditions). Which products can be obtained? (a) 2-(methoxymethyl)furan; (b) a ring-substituted product with OCH3 at C5 and the carbon chain shifted to CH3; (c) a ring-substituted product with OCH3 at C2 (the carbon bearing the CH3 group); (d) all of these.

Solution. Answer (from key): (d). Loss of chloride gives a furfuryl cation that is delocalised over the exocyclic CH2 and the ring carbons (positive charge on the CH2, on C3 and on C5). Methoxide or methanol can attack at any of these positions, so all of the products are possible.

Teacher's Note: A resonance-delocalised cation can be trapped at every positive site.

Exam Note: Draw resonance forms of the furfuryl cation.

Question 1.34. What is the principal product when the Fischer-projected 2-bromo-4-chloropentane (top CH3; C2: H left, Br right; C3: H, H; C4: H left, Cl right; bottom CH3) reacts with NaN3? (a) N3 on the right at C2 (retention), Cl unchanged; (b) N3 on the left at C2 and Cl moved to the left at C4; (c) N3 on the left at C2 (inverted), Cl unchanged on the right at C4; (d) N3 on the right at C2 and Cl on the left at C4.

Solution. Answer (from key): (c). Br- is a better leaving group than Cl-, so only C-Br reacts. SN2 inverts the C2 centre, so N3 appears on the left (opposite to the original Br) and H on the right; C4 keeps its Cl.

Teacher's Note: Better leaving group (Br) reacts; SN2 inverts that centre only.

Exam Note: Invert C2, leave the C-Cl alone.

Question 1.35. What would be the effect of increasing solvent polarity on the rate of each reaction? (Nu = neutral nucleophile). (A) Nu + R-L → Nu+-R + L-. (B) R-L+ → R+ + :L. Options for each: (a) increases; (b) decreases; (c) constant; (d) cannot be predicted.

Solution. Answer (from key): (A) (a); (B) (b). In (A) neutral reactants develop charge in the transition state, so a more polar solvent stabilises it and speeds up the reaction. In (B) the charge is merely dispersed over a larger/neutral leaving group, so the transition state is less polar than the reactant and a polar solvent slows the reaction slightly.

Teacher's Note: Polar solvents speed up reactions that create charge and slow those that disperse it.

Exam Note: Compare charge in reactant vs transition state.

Question 1.36. Which of the following is most reactive toward SN2? (a) CH2=CH-CH2-Cl; (b) Ph-CH2-Cl; (c) CH3-O-CH2CH2-Cl; (d) Ph-C(=O)-CH2-Cl.

Solution. Answer (from key): (d). Phenacyl chloride is an α-halo ketone: the adjacent carbonyl lowers the energy of the SN2 transition state by orbital overlap, making it much more reactive than allyl or benzyl chloride.

Teacher's Note: α-Halo carbonyl compounds are exceptionally fast in SN2.

Exam Note: Name α-halo ketone activation.

Question 1.37. 4-Chloro-1-butanol + NaOH → (B). Product (B) is: (a) tetrahydropyran (six-membered cyclic ether); (b) tetrahydrofuran (five-membered cyclic ether); (c) 2-methyloxetane; (d) 2-ethyloxirane.

Solution. Answer (from key): (b). NaOH converts the alcohol to an alkoxide, which attacks the C-Cl carbon in an intramolecular Williamson reaction. The 5-membered ring (O plus four carbons, tetrahydrofuran) forms fastest.

Teacher's Note: Intramolecular Williamson favours 5- and 6-membered rings; here the chain gives a 5-membered ring.

Exam Note: Count ring size: O + 4 C = THF.

Question 1.38. In which pair is the first compound more reactive than the second toward SN2? (a) (CH3)2CHBr or CH3CH2CH2Br; (b) CH3CH2CH2Br or CH3CH2CH2I; (c) Ph-Br or CH3CH2CH2Br; (d) CH2=CH-CH2Cl or CH2=CH-Cl.

Solution. Answer (from key): (d). Allyl chloride has a reactive sp3 C-Cl carbon, while vinyl chloride's sp2 C-Cl bond does not undergo SN2. In (a) the primary bromide is faster, in (b) the iodide is faster, and in (c) the aryl bromide is unreactive.

Teacher's Note: SN2 needs an sp3 carbon; compare steric hindrance and leaving group.

Exam Note: Reject sp2 halides for SN2.

Question 1.39. In which pair is the second reaction more reactive than the first toward SN2? (a) EtCl + EtO- or EtCl + EtOH; (b) EtCl + EtO- or EtCl + EtS-; (c) Et-Cl (1 M) + CH3O- (2 M) or Et-Cl (2 M) + CH3O- (1 M); (d) Et-Br + Ph3P or Et-Br + Ph3N.

Solution. Answer (from key): (b). EtS- is a much better nucleophile than EtO- (larger, more polarisable), so the second reaction is faster. In (a) the first (anion) is faster; in (c) the rates are equal (rate = k[RCl][Nu], product of concentrations 2 in both); in (d) Ph3P is more nucleophilic than Ph3N, so the first is faster.

Teacher's Note: SN2 rate = k[RX][Nu]; sulphur and phosphorus nucleophiles beat oxygen and nitrogen.

Exam Note: Check concentrations before comparing nucleophiles.

Question 1.40. In which pair of SN1 reactions is the second more reactive than the first? (a) Me3CCl + H2O → Me3COH or Me3CBr + H2O → Me3COH; (b) Me3CCl + CH3OH → Me3C-OCH3 or Me3C-Cl + H2O → Me3C-OH; (c) Me3CCl (1 M) + H2O or Me3CCl (2 M) + H2O; (d) all of these.

Solution. Answer (from key): (d). (a) Br- is a better leaving group than Cl-; (b) water is more polar than methanol, so it stabilises the ionisation transition state better; (c) the SN1 rate = k[RX], so doubling the concentration of the halide doubles the rate.

Teacher's Note: SN1 rate rises with leaving-group ability, solvent polarity and substrate concentration.

Exam Note: Check each of the three variables.

Question 1.41. Which is a true statement concerning the transition state of an SN2 reaction? (a) Closely resembles a carbocation intermediate; (b) The electrophile is responsible for the reaction; (c) Lower in energy than the starting materials; (d) Involves both the nucleophile and the electrophile.

Solution. Answer (from key): (d). The SN2 transition state is a single five-coordinate species in which the nucleophile is partly bonded and the leaving group is partly detached, so both reactants are involved. It is a maximum (higher than the reactants) and no carbocation is formed.

Teacher's Note: A transition state is an energy maximum, and in SN2 it contains both reactants.

Exam Note: Mention five-coordinate carbon in the TS.

Question 1.42. Increasing the concentration of a nucleophile in a typical SN2 reaction by a factor of 10 will cause the reaction rate to: (a) increase by a factor of 10; (b) increase by a factor of 102; (c) decrease by a factor of 10; (d) remain about the same.

Solution. Answer (from key): (a). Rate = k[RX][Nu] is first order in the nucleophile, so a tenfold increase in [Nu] raises the rate tenfold.

Teacher's Note: First order in the nucleophile means the rate scales linearly with its concentration.

Exam Note: Write rate = k[RX][Nu] and scale.

Question 1.43. Decreasing the concentration of an electrophile in a typical SN2 reaction by a factor of 3 will cause the reaction rate to: (a) increase by a factor of 3; (b) increase by a factor of 32; (c) decrease by a factor of 3; (d) remain about the same.

Solution. Answer (from key): (c). The rate is first order in the electrophile, so cutting its concentration to one third reduces the rate to one third.

Teacher's Note: SN2 is first order in each reactant.

Exam Note: Use rate = k[RX][Nu].

Question 1.44. Increasing the concentration of an electrophile in a typical SN2 reaction by a factor of 3 and the concentration of the nucleophile by a factor of 3 will change the reaction rate to: (a) increase by a factor of 6; (b) increase by a factor of 9; (c) decrease by a factor of 3; (d) remain about the same.

Solution. Answer (from key): (b). Rate = k[RX][Nu], so tripling both gives 3 × 3 = 9 times the original rate.

Teacher's Note: Rates multiply when both first-order concentrations change.

Exam Note: Multiply, do not add, the factors.

Question 1.45. (1-Bromoethyl)cyclopentane of defined configuration (CH3 up, H hashed, Br wedged on the side-chain carbon) reacts with Na+ -SCH2CH3. Select the product: (a) CH3, H hashed and SCH2CH3 in the same positions as Br (retention); (b) and (d) products with an extra CH3 on the ring (wrong skeleton); (c) CH3 up, SCH2CH3 hashed and H in the former Br position (inversion).

Solution. Answer (from key): (c). EtS- is a strong nucleophile and the halide is secondary, so the reaction is SN2 with inversion of configuration: the SEt group enters from the side opposite to Br. Options (b) and (d) also change the carbon skeleton.

Teacher's Note: SN2 at a stereocentre inverts the configuration.

Exam Note: Draw the nucleophile on the opposite face.

Question 1.46. The Fischer-projected alkyl iodide (top I; carbon with Me left and H right; next carbon with Et left and D right; H at bottom) reacts with KSH. Identify the product from four Fischer structures (a)-(d).

Solution. Answer (from key): (d). HS- displaces I- by SN2 with inversion. Because the leaving group sits on the vertical axis, inversion of configuration places SH on the vertical (top) position and exchanges the horizontal groups, so Me and H swap sides (H on the left, Me on the right). The Et/D carbon is unchanged.

Teacher's Note: In a Fischer projection, SN2 inversion swaps the two horizontal groups of the reacting centre.

Exam Note: Swap horizontal groups at the reacting carbon.

Question 1.47. R-OH (a secondary alcohol with a chiral centre, OH hashed) + SOCl2 → R-Cl (Cl hashed, same position) + SO2 + HCl. The reaction proceeds by the ........ mechanism: (a) SNi; (b) SN2; (c) SE2; (d) SN1.

Solution. Answer (from key): (a). The alcohol forms an alkyl chlorosulphite (ROSOCl). In the absence of base the chlorosulphite collapses by an internal return (SNi), delivering Cl from the same face, so the configuration is retained.

Teacher's Note: SNi gives retention with SOCl2 (no pyridine); pyridine gives inversion.

Exam Note: Say retention, SNi.

Question 1.48. Consider the anions: (I) CF3SO3-; (II) C6H5SO3-; (III) phenoxide, C6H5O-; (IV) CH3COO-. When attached to an sp3 carbon, their leaving group ability in nucleophilic substitution decreases in the order: (a) I > II > III > IV; (b) I > II > IV > III; (c) IV > I > II > III; (d) IV > III > II > I.

Solution. Answer (from key): (b) I > II > IV > III. Better leaving groups are the weaker bases (conjugate bases of stronger acids): CF3SO3H (strongest) > C6H5SO3H > CH3COOH (pKa about 4.8) > C6H5OH (pKa about 10).

Teacher's Note: Leaving-group ability follows the acidity of the conjugate acid.

Exam Note: Rank by pKa of conjugate acids.

Question 1.49. The Fischer projection (top Ph; C2: H left, CH3 right; C3: Cl left, H right; bottom Ph) reacts with PhSNa by SN2. The principal organic product is: (a) PhS on the left at C3 (retention); (b) PhS on the right at C3, H on the left (inversion); (c) Cl retained with Ph groups interchanged; (d) Ph in place of Cl.

Solution. Answer (from key): (b). PhS- is an excellent nucleophile and the reaction is SN2, so configuration at the C-Cl carbon is inverted: PhS enters on the side opposite to Cl (right), H moves to the left. The other stereocentre is unchanged.

Teacher's Note: SN2 inversion: nucleophile ends opposite to the departing group.

Exam Note: Invert only the C-Cl carbon.

Question 1.50. Reaction of (R)-2-butanol with p-toluenesulphonyl chloride in pyridine followed by reaction with LiBr gives: (a) (R)-2-butyl bromide; (b) (S)-2-butyl tosylate; (c) (R)-2-butyl tosylate; (d) (S)-2-butyl bromide.

Solution. Answer (from key): (d). Tosylation breaks the O-H bond, not the C-O bond, so (R)-2-butyl tosylate forms with retention. Br- then displaces the tosylate by SN2 with inversion, giving (S)-2-bromobutane.

Teacher's Note: Tosylation retains configuration; the following SN2 inverts it.

Exam Note: Count one inversion overall: R to S.

Question 1.51. The compound which undergoes SN1 reaction most rapidly is: (a) bromocyclohexane; (b) 3-bromocyclohexene (allylic secondary bromide); (c) cyclohexylmethyl bromide; (d) a bridgehead bicyclic bromide.

Solution. Answer (from key): (b). The allylic bromide ionises to a resonance-stabilised allylic carbocation. Bromocyclohexane gives only a secondary cation, the primary halide (c) a primary cation, and a bridgehead cation (d) cannot be planar.

Teacher's Note: Allylic cations are resonance stabilised, so allylic halides ionise easily.

Exam Note: Allylic beats secondary, primary, bridgehead.

Question 1.52. Addition of KI accelerates the hydrolysis of primary alkyl halides because: (a) KI is soluble in organic solvents; (b) the iodide ion is a weak base and a poor leaving group; (c) the iodide ion is a strong base; (d) the iodide ion is a powerful nucleophile as well as a good leaving group.

Solution. Answer (from key): (d). I- first displaces the original halide by SN2 to give the alkyl iodide. Iodide is an excellent leaving group, so water then displaces it quickly; I- acts as a catalyst.

Teacher's Note: Iodide catalysis works through two quick SN2 steps.

Exam Note: Mention nucleophile and leaving group roles.

Question 1.53. Which of the following phrases are not correctly associated with an SN1 reaction? (1) Rearrangement is possible; (2) Rate is affected by polarity of solvent; (3) The strength of the nucleophile is important in determining rate; (4) The reactivity series is tertiary > secondary > primary; (5) Proceeds with complete inversion of configuration. (a) 3, 5; (b) 5 only; (c) 2, 3, 5; (d) 3 only.

Solution. Answer (from key): (a). (3) is wrong because the rate-determining step is ionisation, independent of the nucleophile. (5) is wrong because the planar carbocation is attacked from both faces, giving racemisation (or partial inversion), not complete inversion. Statements 1, 2 and 4 are correct.

Teacher's Note: SN1 rate is independent of the nucleophile and the stereochemical outcome is racemisation.

Exam Note: Say rate-determining step is ionisation.

Question 1.54. p-Cyclopentyltoluene (a cyclopentyl group para to CH3 on benzene) is treated with SO2Cl2/hν to give (A), then NBS to give (B), then KSH to give (C). Product (C) is: (a) CH2SH on the ring and Br on the cyclopentyl carbon attached to the ring; (b) CH2SH on the ring and Cl on the cyclopentyl carbon attached to the ring; (c) CH2Br on the ring and SH on the cyclopentyl carbon; (d) CH2Br on the ring and a cyclopentene.

Solution. Answer (from key): (b). SO2Cl2/hν chlorinates the weakest, tertiary benzylic C-H on the cyclopentyl ring to give the tertiary benzylic chloride (A). NBS then brominates the benzylic CH3 to give ArCH2Br (B). KSH substitutes the primary benzylic bromide (SN2), giving ArCH2SH while the hindered tertiary C-Cl is retained.

Teacher's Note: Radical halogenation selects the most stable (tertiary benzylic) radical; the primary benzylic bromide is then substituted.

Exam Note: Track Cl from SO2Cl2 and Br from NBS.

Question 1.55. Energy profile for an exothermic reaction A (1) → B (2) → C (3) → D is given: three peaks 1, 2, 3 (peak 1 is the highest, peaks 2 and 3 are lower). The rate determining step is: (a) A → B; (b) B → C; (c) C → D; (d) cannot predict.

Solution. Answer (from key): (a). The rate-determining step is the one with the highest-energy transition state. Peak 1, for A → B, is the highest on the profile.

Teacher's Note: The rate-determining step passes through the highest transition state.

Exam Note: Pick the tallest peak.

Question 1.56. 1-Methyl-1,2,3,4-tetrahydronaphthalene (1-methyltetralin) is treated with NBS. The major product (A) is: (a) 1-bromo-1-methyltetralin (Br on the tertiary benzylic carbon); (b) 1-(bromomethyl)tetralin; (c) 4-bromo-1-methyltetralin; (d) 2-bromo-1-methyltetralin.

Solution. Answer (from key): (a). NBS brominates the benzylic position through a radical chain. The tertiary benzylic C-H (bearing the CH3) gives the most stable (tertiary, benzylic) radical, so Br enters there.

Teacher's Note: NBS selectivity follows radical stability: tertiary benzylic is the best.

Exam Note: Choose the tertiary benzylic carbon.

Question 1.57. Chlorocyclopentyl compound (a cyclopentane with Cl on the ring carbon that also carries a CH2CH2Cl chain) reacts with LiBr/DMSO under SN2 conditions. The major product (X) is: (a) Br on the ring carbon and Cl on the chain end; (b) Cl retained on the ring carbon and Br at the chain end; (c) Br at both positions; (d) Cl on the ring carbon and a vinyl group (elimination).

Solution. Answer (from key): (b). Under SN2 conditions Br- attacks the unhindered primary C-Cl carbon. The tertiary ring C-Cl cannot undergo SN2 and is left unchanged.

Teacher's Note: SN2 occurs only at the primary carbon; the tertiary chloride stays.

Exam Note: Replace the primary Cl only.

Question 1.58. Relative rate of reaction of the following amines with methyl iodide: (A) triethylamine-type open-chain tertiary amine; (B) quinuclidine (1-azabicyclo[2.2.2]octane); (C) DABCO (1,4-diazabicyclo[2.2.2]octane). (a) A > B > C; (b) A > C > B; (c) B > C > A; (d) B > A > C.

Solution. Answer (from key): (c) B > C > A. In the bicyclic amines the alkyl groups are tied back, so the nitrogen lone pair is open to attack; the open-chain amine is more hindered. Quinuclidine is the most basic and nucleophilic; DABCO is slightly less so because of the second, electron-withdrawing nitrogen.

Teacher's Note: Tied-back (bicyclic) amines are more nucleophilic than open-chain amines of similar basicity.

Exam Note: Say steric accessibility of N lone pair.

Question 1.59. A tosylate of a secondary alcohol carrying OCH3 and benzyloxy (PhCH2O) groups, drawn in a perspective (sawhorse-type) projection, is treated with NaI in dimethyl sulphoxide. The major product expected is: four perspective drawings (a)-(d).

Solution. Answer (from key): (c). NaI in DMSO gives a clean SN2 reaction at the carbon bearing OTs: I- enters from the back side and OTs leaves, so that carbon is inverted while the other stereocentres and the ether groups remain unchanged. Options retaining OTs (d) or showing retention of configuration (a) are therefore wrong. Note: structure drawings were not redrawn; the answer is as given in the key.

Teacher's Note: Iodide in DMSO on a secondary tosylate gives SN2 with inversion at that carbon only.

Exam Note: Invert the C-OTs centre; keep the others.

Question 1.60. trans-4-Chlorocyclohexanethiol (SH and Cl on opposite faces, 1,4 to each other) is treated with NaOH in aqueous ethanol to give (A) (major, C6H10S) plus a cyclohexenethiol as the minor product. Major product (A) is: (a) 4-mercaptocyclohexene; (b) 7-thiabicyclo[2.2.1]heptane; (c) 4-mercaptocyclohexanol; (d) cyclohexanethione.

Solution. Answer (from key): (b). NaOH converts SH to the thiolate, which attacks the C-Cl carbon from the back side (the 1,4-trans arrangement lets the ring flip to a boat so S can reach the rear face), giving the sulphur-bridged bicyclic sulphide, C6H10S. Elimination gives the minor cyclohexene.

Teacher's Note: Intramolecular SN2 by a thiolate forms a bridged sulphide when the geometry allows backside attack.

Exam Note: Match formula C6H10S to the bicyclic sulphide.

Question 1.61. CH3-C(Ph)(CH3)-14CH(OTs)-CH3 (3-methyl-3-phenyl-2-butyl tosylate with 14C at the carbon bearing OTs) is heated. The major product is: (a) (CH3)2C=C(CH3)Ph-type alkene with the label on the (CH3)2C carbon; (b) Ph-C(CH3)2-14CH=CH2; (c) (CH3)2C=14C(CH3)Ph (label on the carbon bearing Ph and CH3); (d) the alkene with the label on a CH3 group.

Solution. Answer (from key): (c). Ionisation (assisted by the neighbouring phenyl group through a phenonium ion) moves Ph to the labelled carbon, giving the more stable tertiary cation (CH3)2C+-14CH(Ph)CH3. Loss of H+ from the labelled carbon gives the tetrasubstituted, conjugated alkene (CH3)2C=14C(Ph)CH3, so the label sits on the carbon carrying Ph.

Teacher's Note: Phenyl migration converts a 2° cation to a 3° one; Zaitsev loss of H+ gives the most substituted alkene.

Exam Note: Track the label through the phenyl shift.

Question 1.62. The decreasing order of reactivity towards solvolysis under identical conditions is: (I) 2-(4-cyclopropylphenyl)-2-chloropropane; (II) the same with an additional CH3 on the ring ortho to the cyclopropyl group (meta to the C-Cl carbon); (III) cumyl chloride, PhC(CH3)2Cl. (a) II > III > I; (b) I > II > III; (c) III > II > I; (d) II > I > III.

Solution. Answer (from key): (d) II > I > III. Solvolysis is SN1, so the order follows carbocation stability. A p-cyclopropyl group strongly stabilises a benzylic cation by conjugation, so I and II are faster than the unsubstituted III. The extra methyl in II adds a small electron-donating effect and makes II the fastest.

Teacher's Note: Cyclopropyl is a powerful π-donor to adjacent cations; extra alkyl groups add a little more stabilisation.

Exam Note: Rank by carbocation stabilisation.

Question 1.63. A benzocycloheptene with a phenolic OH on the benzene ring and an alcoholic OH on the seven-membered ring is treated with (1) one equivalent of NaOH, (2) MeBr. Product (A) is: (a) the aryl methyl ether (OMe on the benzene ring) with the alcoholic OH free; (b) the alkyl methyl ether (OMe on the ring carbon) with the phenolic OH free; (c) a dehydrated alkene; (d) none of these.

Solution. Answer (from key): (a). The phenolic OH (pKa about 10) is far more acidic than the alcoholic OH (pKa about 16), so one equivalent of NaOH forms only the phenoxide. The phenoxide then undergoes Williamson methylation with MeBr to give the aryl methyl ether.

Teacher's Note: One equivalent of base deprotonates the more acidic OH, so only the phenol is methylated.

Exam Note: Link pKa difference to selectivity.

Question 1.64. (R)-2-Octyl tosylate is solvolysed in water under ideal SN1 conditions. The product(s) will be: (a) R-2-octanol and S-2-octanol in a 1 : 1 ratio; (b) R-2-octanol and S-2-octanol in a 1.5 : 1 ratio; (c) R-2-octanol only; (d) S-2-octanol only.

Solution. Corrected: the printed key gives (b), which is wrong. Answer: (a). Under ideal SN1 conditions the tosylate ionises to a free, planar secondary carbocation that water attacks equally from both faces, so a racemic 1 : 1 mixture of (R)- and (S)-2-octanol forms. (A 1.5 : 1 ratio could only arise from ion-pair effects, which are excluded by "ideal" conditions, and would favour inversion, i.e. S.)

Teacher's Note: A free planar carbocation is attacked equally on both faces, giving a racemate.

Exam Note: Write 1:1, racemic.

Question 1.65. From each of the following pairs select the compound that will react faster with sodium iodide in acetone. Pair-A: (1) 2-chloropropane, (2) 2-bromopropane. Pair-B: (3) 1-bromobutane, (4) 2-bromobutane. Options: (a) 1, 3; (b) 1, 4; (c) 2, 3; (d) 2, 4.

Solution. Answer (from key): (c) 2, 3. NaI/acetone is an SN2 (Finkelstein) reaction. In Pair-A Br is the better leaving group, so 2-bromopropane reacts faster. In Pair-B the primary halide is less hindered than the secondary one, so 1-bromobutane reacts faster.

Teacher's Note: In SN2, a better leaving group and less hindered carbon both increase the rate.

Exam Note: Compare one factor per pair.

Question 1.66. Among the given halides, which will give the same product in both SN1 and SN2 reactions? (I) 2-bromo-4-methylpentane, (CH3)2CH-CH2-CHBr-CH3; (II) a methyl-substituted cycloalkyl chloride in which a more stable carbocation can form by rearrangement; (III) chlorocyclohexane; (IV) 2-bromobutane. (a) (III) only; (b) (I) and (II); (c) (III) and (IV); (d) (I), (III) and (IV).

Solution. Answer (from key): (d) I, III and IV. These three are secondary halides whose carbocation has no neighbouring hydrogen or alkyl shift that would give a more stable cation, so SN1 and SN2 give the same constitution. In (II) the secondary cation shifts a hydrogen to give a tertiary cation, so the SN1 product differs.

Teacher's Note: Same product requires no carbocation rearrangement.

Exam Note: Exclude any halide that can rearrange.

Question 1.67. Product(s) formed in the reaction of 2-phenylethyl tosylate with isotopic carbon (C*) at the CH2OTs carbon (Ph-CH2-C*H2-OTs) with AcONa/AcOH: (a) Ph-C*H2-CH2-OAc (label next to the ring); (b) Ph-CH2-C*H2-OAc (label on the OAc carbon); (c) the starting tosylate with an OAc substituent on the ring; (d) both (a) and (b).

Solution. Answer (from key): (d). The phenyl ring participates as the tosylate leaves, giving a symmetrical bridged phenonium ion. Acetate opens the bridge at either carbon with equal probability, so the label appears at both positions.

Teacher's Note: A phenonium bridge makes the two CH2 carbons equivalent, scrambling the isotope.

Exam Note: Mention phenonium ion and 50:50 scrambling.

Question 1.68. Anisole + excess HI (conc.), reflux → product: (a) iodobenzene + CH3I; (b) iodobenzene + CH3OH; (c) phenol + CH3I; (d) phenol + CH3CH2I.

Solution. Answer (from key): (c). HI protonates the ether oxygen, and I- attacks the methyl carbon (SN2), cleaving the CH3-O bond. The aryl C-O bond is not cleaved, so phenol and methyl iodide result.

Teacher's Note: Aryl alkyl ethers cleave at the alkyl-O bond; sp2 C-O never breaks with HI.

Exam Note: Say I- attacks the methyl carbon.

Question 1.69. Which of the following compounds would react faster with NaCN in an SN2 reaction? (a) 2-methoxy-2-methylbutane type tertiary methyl ether; (b) cyclopentyl tosylate; (c) CH3O-CH2CH2CH3-type primary methyl ether; (d) a primary alkyl tosylate.

Solution. Answer (from key): (d). Tosylate is an excellent leaving group and the primary carbon is unhindered. Methoxy (a, c) is a very poor leaving group, and the secondary tosylate (b) is slower than the primary because of steric hindrance.

Teacher's Note: SN2 needs a good leaving group on an unhindered carbon.

Exam Note: Pick primary tosylate.

Question 1.70. HC≡CNa + Cl-CH2-CH2-CH2-I → (A). The major product (A) is: (a) HC≡C-CH2CH2CH2-I; (b) CH2=CH-CH2-I; (c) HC≡C-CH2CH2CH2-Cl; (d) CH2=CH-CH2-Cl.

Solution. Answer (from key): (c). The acetylide is a good nucleophile, and the reaction is SN2 at the carbon bearing the better leaving group. Iodide is a much better leaving group than chloride, so I is displaced and Cl is retained.

Teacher's Note: SN2 occurs at the carbon bearing the better leaving group: I over Cl.

Exam Note: Replace I, keep Cl.

Question 1.71. What is the major product when sodium thiophenoxide (PhSNa) reacts with CH3-Br in Et2O? (a) benzene; (b) bromobenzene; (c) methyl phenyl sulphide, PhSCH3; (d) benzene with a different substituent.

Solution. Answer (from key): (c). PhS- is a strong nucleophile and CH3Br is an unhindered methyl halide, so SN2 gives PhS-CH3 (thioanisole) and NaBr.

Teacher's Note: Thiolate plus a methyl halide is a clean SN2 forming a thioether.

Exam Note: Write PhS- + CH3Br → PhSCH3.

Question 1.72. cis- or trans-1-bromo-4-methylcyclohexane (Br up, H down on one carbon; CH3 and H on the opposite carbon, as drawn) + OH- (SN2) → A. The product A is: (a) the alcohol with OH in the same position as Br (retention); (b) the alcohol with OH on the opposite face to the original Br (H up, OH down); (c) both (a) and (b) are correct; (d) none is correct.

Solution. Answer (from key): (b). SN2 proceeds with complete inversion at the carbon carrying Br, so OH ends up on the face opposite to the original Br while the CH3 carbon is untouched.

Teacher's Note: SN2 gives one inverted product, never a mixture.

Exam Note: State inversion gives the other diastereomer.

Question 1.73. (CH3)2C=CH-CH2-CH2-Cl in H2O/CaCO3 gives (X). The major product is: (a) (CH3)2C(OH)-CH2CH2CH3-type tertiary alcohol; (b) (CH3)2C=CH-CH2-CH2-OH; (c) (CH3)2C=CH-CH(OH)-CH2-OH-type diol; (d) cyclopropyl-C(CH3)2-OH (2-cyclopropylpropan-2-ol).

Solution. Answer (from key): (d). The C=C double bond participates (neighbouring-group participation) as chloride leaves, forming a cyclopropylcarbinyl-type cation whose positive charge is on the exocyclic carbon bearing two CH3 groups, a stabilised tertiary cation. Water attacks it to give 2-cyclopropylpropan-2-ol; CaCO3 neutralises the HCl formed.

Teacher's Note: A π bond placed homoallylic to the leaving group can attack it, forming a cyclopropylcarbinyl cation.

Exam Note: Name π-participation giving cyclopropylcarbinyl cation.

Question 1.74. m-Hydroxybenzyl alcohol (3-HOC6H4CH2OH) + HBr (heat) → (A); 3-methoxyphenol + HBr (heat) → (B). Products (A) and (B) respectively are: (a) 3-hydroxybenzyl bromide and 3-bromophenol; (b) 3-hydroxybenzyl bromide and resorcinol (1,3-dihydroxybenzene); (c) 3-hydroxybenzyl bromide and 3-bromophenol (positions as drawn); (d) 3-bromobenzyl alcohol and 3-bromoanisole.

Solution. Answer (from key): (b). (A) the benzylic alcohol is protonated and displaced by Br- to give the benzyl bromide; the phenolic C-O bond is never broken. (B) HBr cleaves the aryl methyl ether at the CH3-O bond, giving resorcinol and CH3Br.

Teacher's Note: HBr converts benzylic alcohols to bromides and cleaves aryl methyl ethers to phenols.

Exam Note: Phenol C-O never breaks with HBr.

Question 1.75. Relative rate of reaction with H2O of three 7-norbornenyl p-nitrobenzenesulphonates (ONs = O-SO2-C6H4-NO2): (i) with the leaving group anti to the C=C and no substituent; (ii) with one CH3 on a C=C carbon; (iii) with CH3 on both C=C carbons. (a) (i) > (ii) > (iii); (b) (ii) > (i) > (iii); (c) (iii) > (ii) > (i); (d) (iii) > (i) > (ii).

Solution. Answer (from key): (c). The C=C lies on the side opposite the leaving group, so its π electrons assist ionisation from the back (neighbouring-group participation), forming a delocalised bridged cation. Each CH3 on the C=C carbons adds electron density and stabilises the positive charge, so the rate increases with the number of methyl groups: (iii) > (ii) > (i).

Teacher's Note: π-Participation speeds ionisation; electron-donating methyl groups on the alkene speed it further.

Exam Note: Count methyl groups on the participating alkene.

Question 1.76. Pentane-2,4-dione (acetylacetone) is treated with 2 equivalents of KNH2 in liquid NH3, then n-C4H9-Br, then H3O+ to give (P). The end product (P) is: (a) and (c) the 3-alkylated products (butyl or related chain on the central carbon between the C=O groups); (b) and (d) the products alkylated at a terminal CH3 carbon, differing in the drawn chain position.

Solution. Answer (from key): (d). Two equivalents of strong base give the dianion, in which the terminal (γ) carbanion is the more basic and more reactive carbanion, while the central carbanion is stabilised by both carbonyls. The first equivalent of electrophile therefore alkylates the terminal carbon, giving the terminal butyl-substituted diketone, nonane-2,4-dione. Acid work-up reprotonates the central carbon. The key structure was not redrawn.

Teacher's Note: In a dianion, the less stabilised (terminal) carbanion is the more nucleophilic and reacts first.

Exam Note: Alkylate the more reactive terminal carbanion.

Question 1.77. Which of the following statements is correct regarding the rate of hydrolysis of compounds (A) 5-bromocyclopenta-1,3-diene and (B) 4-bromo-4H-pyran by SN1? (a) A reacts faster than B; (b) B reacts faster than A; (c) both react at the same rate; (d) neither A nor B reacts.

Solution. Answer (from key): (b). Ionisation of (B) gives the pyrylium ion, an aromatic 6π cation. Ionisation of (A) gives the cyclopentadienyl cation, which is antiaromatic (4π) and highly unstable. So B hydrolyses much faster.

Teacher's Note: Aromatic cations form easily; antiaromatic cations are strongly destabilised.

Exam Note: Compare the aromaticity of the cations formed.

Question 1.78. What are reactant X and product Y in the following sequence? X reacts with p-toluenesulphonyl chloride in pyridine to give a cyclopentyl tosylate (CH3 wedge, H hashed on one carbon; OTs on the adjacent carbon, with H hashed), then NaN3 in ethanol-water gives Y. Options (a)-(d) give X as the cyclopentanol with OH wedge or hashed and Y as the azide with N3 wedge or hashed.

Solution. Answer (from key): (b). Tosylation occurs at the O-H bond and does not touch the stereocentre, so X is the alcohol with OH in the same position as the OTs (wedge). NaN3 then displaces OTs by SN2 with inversion, so in Y the azide is on the opposite face (hashed) and H is wedged. Structures were not redrawn.

Teacher's Note: Tosylation retains configuration; SN2 with azide then inverts it.

Exam Note: Retention then inversion: net inversion.

Question 1.79. Transition state of the SN2 reaction of benzyl bromide (PhCH2Br) with RO- to give PhCH2-O-R is: (a) a trigonal-bipyramidal TS with δ- on OR and δ+ on Br; (b) δ+ on both OR and Br; (c) δ+ on OR and δ- on Br; (d) δ- on both OR and Br (OR and Br collinear with the CH2 carbon, three groups in a plane).

Solution. Answer (from key): (d). In the SN2 transition state the carbon is five-coordinate, with the entering OR and leaving Br collinear and the other three groups coplanar. The negative charge of the nucleophile is being transferred to the leaving group, so both partial bonds carry a partial negative charge, δ- on OR and δ- on Br.

Teacher's Note: In the SN2 TS the negative charge is shared between nucleophile and leaving group.

Exam Note: Draw collinear Nu...C...X with δ- on both.

Question 1.80. C6H13Br + OH- → C6H13OH + Br- is an example of: (a) nucleophilic addition; (b) nucleophilic substitution; (c) electrophilic addition; (d) electrophilic substitution; (e) free radical substitution.

Solution. Answer (from key): (b). The nucleophile OH- replaces the leaving group Br- on an sp3 carbon, which is nucleophilic substitution.

Teacher's Note: A nucleophile replacing a leaving group on sp3 carbon is nucleophilic substitution.

Exam Note: Name the nucleophile and leaving group.

Question 1.81. A three-step reaction profile shows reactant, T.S.1, intermediate 1, T.S.2 (the highest peak), intermediate 2 (a well higher in energy than intermediate 1), T.S.3 and product. Transition state 2 is structurally most likely as: (a) intermediate 1; (b) transition state 3; (c) intermediate 2; (d) product.

Solution. Answer (from key): (c). By Hammond's postulate a transition state resembles the species nearer it in energy. The step from intermediate 1 to intermediate 2 is endothermic, so T.S.2 is a late transition state that resembles the higher-energy species, intermediate 2.

Teacher's Note: Hammond: endothermic step means a late, product-like transition state.

Exam Note: Link endothermic step to late TS.

Question 1.82. A compound containing a cyclohexane-1,3,5-trione ring (C=O at three alternate carbons) bearing a t-butyl group, a cyclopropylmethyl group and a cycloheptatrienyl group on the three remaining ring carbons. x = number of aromatic compounds obtained when the above compound undergoes complete acidic hydrolysis. (a) 1; (b) 2; (c) 3; (d) 4.

Solution. Answer (from key): (b) 2. The key's value is given as printed. Reasoning is not shown in the book and the structure could not be fully verified from the scan, so a human check is recommended.

Teacher's Note: Count aromatic products; the 1,3,5-trione ring can enolise to an aromatic triol.

Exam Note: Count aromatic species, check each ring.

Question 1.83. SN1 and SN2 reactions are: (a) both stereospecific; (b) both stereoselective; (c) stereoselective and stereospecific respectively; (d) stereospecific and stereoselective respectively.

Solution. Answer (from key): (b) and (c). SN2 is stereospecific (inversion for every substrate) and, being stereospecific, also stereoselective. SN1 is stereoselective, not stereospecific, because the planar cation gives both stereoisomers, with one usually favoured. So (c) is the exact description, and (b) is also acceptable.

Teacher's Note: Stereospecific means each stereoisomer gives a specific product; SN2 qualifies, SN1 does not.

Exam Note: Say SN2 stereospecific, SN1 only selective.

Question 1.84. Most reactive compound toward SN1 is: four iodomethyl-substituted exocyclic alkenes of a five-membered ring diene, a ring diene bearing a ring methylidene, a saturated ring, and a seven-membered cycloheptatriene ring (a)-(d), each of the form ring=C...-CH2-I.

Solution. Answer (from key): (d). The SN1 rate depends on the stability of the carbocation formed. In (d) the cation is conjugated with the cycloheptatriene ring and becomes the aromatic tropylium-type (6π) cation, which is by far the most stable, so (d) ionises fastest. Structure drawings were not redrawn; answer as in the key.

Teacher's Note: Aromatic stabilisation of the carbocation (tropylium) strongly accelerates SN1.

Exam Note: Identify the aromatic cation.

Question 1.85. 4-Ethynylcyclohexanol is treated with (1) NaNH2 (2 eq.), (2) CH3CH2-I, (3) CH3-I, (4) H2/Pd-BaSO4. Product (X) is: (a) the alkene with the ethyl group, side chain CH2-O-CH3; (b) the cis-alkene bearing ethyl on the alkene carbon, with OCH3 on the ring; (c) the CH3-alkene with CH2-O-CH2CH3; (d) the CH3-alkene with O-CH2CH3 on the ring.

Solution. Answer (from key): (b). Two equivalents of NaNH2 remove both the alkyne C-H and the O-H. The acetylide (more nucleophilic) is alkylated first by CH3CH2I to give the internal alkyne; CH3I then methylates the alkoxide to give the OCH3 ether; and H2/Pd-BaSO4 (poisoned catalyst) gives syn addition of H2, converting the alkyne to a cis (Z) alkene.

Teacher's Note: A poisoned Pd catalyst stops at the cis alkene; the stronger nucleophile is alkylated first.

Exam Note: Give the order of alkylations and cis alkene.

Level 2

Question 2.1. Statement-1: Nucleophilicity order in a polar protic solvent is I- < Br- < Cl- < F-.
Statement-2: Due to the bigger size of I- it is less solvated in a polar protic solvent.
(a) S-1 true, S-2 true, S-2 is the correct explanation of S-1. (b) S-1 true, S-2 true, S-2 is NOT the correct explanation. (c) S-1 true, S-2 false. (d) S-1 false, S-2 true.

Solution. Answer (from key): (d). In protic solvents the small F- is strongly hydrogen-bonded and the large, polarisable I- is least solvated, so the true order is F- < Cl- < Br- < I-. Statement-1 is false; Statement-2 is true.

Teacher's Note: In protic solvents nucleophilicity rises down the group because solvation falls; basicity shows the opposite order.

Exam Note: State the reversed order to justify (d).

Question 2.2. Statement-1: CH3CH2Cl + NaI (acetone) → CH3CH2I + NaCl↓.
Statement-2: Acetone is a polar protic solvent and the solubility of sodium halides decreases dramatically in the order NaI > NaBr > NaCl. The last being virtually insoluble in this solvent, a 1° and 2° chloroalkane in acetone is completely driven to the side of the iodoalkane by the precipitation reaction.
Options (a)-(d) as in the previous question.

Solution. Answer (from key): (c). This is the Finkelstein reaction, so Statement-1 is true (NaCl precipitates and drives the reaction). Statement-2 is false because acetone is a polar aprotic solvent, not protic.

Teacher's Note: Finkelstein works because NaCl/NaBr are insoluble in acetone; acetone is aprotic, so the statement fails.

Exam Note: Name Finkelstein and say acetone is aprotic.

Question 2.3. Encircle whichever of the following: (a) is the stronger nucleophile (aprotic solvent): F- or I-; (b) is the stronger nucleophile (protic solvent): F- or I-; (c) is the stronger base: F- or I-; (d) is the stronger nucleophile (protic solvent): NH3 or NH2NH2; (e) is the better leaving group: CH3COO- or CH3SO3-.

Solution. Answer (from key): (a) F-; (b) I-; (c) F-; (d) NH2NH2; (e) CH3SO3-.
Reasons: (a) in an aprotic solvent F- is unsolvated, so nucleophilicity follows basicity; (b) in a protic solvent F- is hydrogen-bonded, so the larger I- wins; (c) HF is a much weaker acid than HI; (d) the lone pair next to the adjacent N makes hydrazine more nucleophilic (alpha effect); (e) methanesulphonate is the conjugate base of a strong acid.

Teacher's Note: Nucleophilicity depends on solvent; leaving-group ability tracks the weakness of the leaving group as a base.

Exam Note: Give solvent-based reason for each pick.

Question 2.4. Encircle whichever of the following: (a) undergoes SN2 more rapidly: CH3-Br or CH3-CHBr-CH3; (b) undergoes SN1 more rapidly: CH3-Br or CH3-CHBr-CH3; (c) undergoes E2 to give (Z)-1,2-diphenylpropene (PhCH=C(CH3)Ph with both Ph on the same side): which of the two Fischer-projection diastereomers of PhCHBr-CH(CH3)Ph (top Ph, H and Br on C1, with C2 carrying H, CH3, bottom Ph; the two differ in the side on which Br sits); (d) reacts with NaI to give (Z)-1,2-diphenylpropene: which of the two diastereomers of PhCHBr-CBr(CH3)Ph; (e) undergoes SN1 more rapidly: a bromotetralin with Br on the benzene ring (aryl bromide) or the one with Br on the benzylic carbon of the saturated ring.

Solution. Answer (from key): (a) CH3-Br (no steric hindrance); (b) CH3-CHBr-CH3 (2° gives a more stable carbocation); (c) the diastereomer in which Br (right, C1) and the C2 hydrogen (left) lie on opposite sides in the Fischer projection, so they are anti-periplanar and the two Ph groups end up on the same side, giving the Z alkene; (d) the dibromide with the two Br atoms on opposite sides (C1 Br right, C2 Br left): I- causes anti elimination of Br2 and the Ph groups stay together (Z); (e) the benzylic bromide (1-bromo-1,2,3,4-tetrahydronaphthalene), because it forms a resonance-stabilised benzylic carbocation, whereas the aryl bromide cannot ionise.

Teacher's Note: E2 and I- debromination are both anti eliminations; in Fischer projections anti means opposite sides.

Exam Note: Show anti-periplanar geometry to get Z.

Question 2.5. Encircle whichever of the following: (a) undergoes SN2 more rapidly: cyclopentylmethyl bromide or 1-bromo-1-methylcyclopentane; (b) undergoes E1 more rapidly: Ph-CH(CH3)-CH2-CH2Br or Ph-C(CH3)(Br)-CH2CH3; (c) undergoes SN1 more rapidly: 3-bromocyclopentene (allylic) or 4-bromocyclopentene (homoallylic); (d) undergoes SN2 more rapidly: 7-chloronorbornane or 1-chloronorbornane (bridgehead); (e) undergoes E2 more rapidly: 7-chloronorbornane or 2-chloronorbornane.

Solution. Answer (from key): (a) cyclopentylmethyl bromide (primary, unhindered); (b) Ph-C(CH3)(Br)-CH2CH3 (tertiary benzylic, most stable carbocation); (c) 3-bromocyclopentene (allylic cation is resonance stabilised); (d) 7-chloronorbornane (a bridgehead carbon cannot be attacked from the back at all); (e) 2-chloronorbornane (elimination from the 7-chloro compound would need a bridgehead double bond, which violates Bredt's rule).

Teacher's Note: Bridgeheads of small bicyclics block backside attack and cannot become planar or form C=C (Bredt's rule).

Exam Note: Cite Bredt's rule for bicyclic parts.

Question 2.6. Match the column: alkyl halides (a) CH3Br, (b) CH3CH2Br, (c) (CH3)2CHBr, (d) (CH3)3CBr, with relative rates for SN1: (p) 1, (q) 1.05, (r) 11, (s) 1,200,000, and for SN2: (w) 1200, (x) 40, (y) 16, (z) 1.

Solution. Answer (from key): a - p, w; b - q, x; c - r, y; d - s, z. SN1 rate rises with carbocation stability (methyl 1, ethyl 1.05, isopropyl 11, t-butyl 1,200,000) while SN2 rate falls with steric crowding (methyl 1200, ethyl 40, isopropyl 16, t-butyl 1).

Teacher's Note: SN1 and SN2 reactivity orders are exactly opposite across methyl to tertiary.

Exam Note: Pair each halide with both rate values.

Question 2.7. Matrix. Column I (benzonorbornene-type chlorides): (a) Cl on the benzene ring (aryl chloride); (b) Cl on a non-benzylic secondary carbon of the bridge; (c) Cl on the bridgehead carbon next to the benzene ring; (d) Cl on a C=C carbon (vinyl chloride). Column II: (p) SN1 can take place; (q) SN2 can take place; (r) SN1 is not possible; (s) SN2 is not possible.

Solution. Answer (from key): a - r, s; b - p, q; c - r, s; d - r, s. (a) and (d): aryl and vinyl halides do neither; (b) a normal secondary halide can do both; (c) a bridgehead cation cannot become planar and the back side is blocked.

Teacher's Note: sp2-C halides and bridgehead halides are inert to both SN1 and SN2.

Exam Note: Classify the carbon bearing Cl first.

Question 2.8. Encircle whichever of the following: (a) undergoes SN2 more rapidly: (2-bromoethyl)cyclopentane or the more branched bromide drawn beside it; (b) undergoes SN1 more rapidly: (CH3)3C-Br or (CH3)3C-I; (c) undergoes SN1 more rapidly: 2-bromonorbornane or 1-bromonorbornane (bridgehead).

Solution. Answer (from key): (a) (2-bromoethyl)cyclopentane (unhindered primary); (b) (CH3)3C-I (I- is the better leaving group); (c) 2-bromonorbornane (the bridgehead cation cannot be planar).

Teacher's Note: Rate-determining ionisation is faster with a better leaving group; bridgehead cations are destabilised.

Exam Note: Give leaving-group or Bredt reason.

Question 2.9. Reactivity: circle the reaction that reacts faster by SN2 in each pair: (1) primary chloride + NaOCH3 or the corresponding primary bromide + NaOCH3; (2) primary iodide + H2O or the same iodide + NaOH; (3) a branched (secondary) chloride + NaOH or a straight-chain primary chloride + NaOH.

Solution. Answer (from key): (1) the bromide (Br- leaves faster than Cl-); (2) the iodide with NaOH (OH- is a far stronger nucleophile than H2O); (3) the straight-chain primary chloride (less steric hindrance).

Teacher's Note: SN2 is sped up by good leaving group, strong nucleophile and low steric hindrance.

Exam Note: Name the factor deciding each pair.

Question 2.10. Consider the potential energy diagram given (a two-step profile with reactants A, first transition state B, intermediate C, second transition state D, and two alternative product levels E (higher) and F (lower)). (X) Name positions A-D. (Y) (i) Both reaction pathways are exothermic or endothermic? (ii) Which step is the rate determining step: B or D? (iii) Which product is more stable: E or F? (iv) In accordance with Hammond's postulate, exothermic reactions tend to have (a) early transition states that are reactant-like, (b) late transition states that are reactant-like, (c) early transition states that are product-like, (d) late transition states that are product-like.

Solution. Answer (from key): (X) A = reactants, B = transition state, C = intermediate, D = transition state. (Y) (i) exothermic; (ii) B (the highest barrier); (iii) F (lowest energy); (iv) (a).

Teacher's Note: Rate-determining step has the highest barrier; Hammond says exothermic steps have early, reactant-like transition states.

Exam Note: Say highest peak = RDS.

Question 2.11. Select whether each combination reacts by substitution (SN1 or SN2) or elimination (E1 or E2): options (a) SN1, (b) SN2, (c) E1, (d) E2. A. Bromocyclopentane, NaI in acetone, 25°C. B. Benzyl chloride, NaOCH3 in methanol, 50°C. C. Chlorocyclohexane, NaOCH3 in methanol, 25°C. D. (CH3)3C-OH, 48% HBr in H2O, 25°C. E. (CH3)2CH-Br, NaCN in ethanol, 25°C. F. A secondary bromocyclopentane derivative, NaCN in ethanol, 25°C. G. (CH3)2CHCH2CH2-OH, 48% HBr in H2O, 50°C.

Solution. Answer (from key): A - b; B - b; C - d; D - a; E - b; F - b; G - b.
A: 2° halide, good nucleophile in aprotic solvent: SN2. B: primary benzylic halide with strong nucleophile: SN2. C: 2° halide with strong base/alkoxide: E2. D: tertiary alcohol protonated and ionised: SN1. E: 2° halide with weakly basic CN-: SN2. F: SN2 by the same reasoning. G: primary protonated alcohol attacked by Br-: SN2.

Teacher's Note: Decide by substrate class plus reagent: strong base promotes E2, weak base good nucleophile promotes SN2.

Exam Note: Justify with substrate type and reagent.

Question 2.12. Ten structures: (a) bromobenzene; (b) (CH3)3C-Cl; (c) cyclohexylmethyl bromide; (d) CH3-I; (e) benzyl bromide; (f) chlorocyclohexane; (g) (CH3)3C-CH2-Cl (neopentyl chloride); (h) CH2=C(CH3)-CH2-Cl; (i) a tertiary bromide on a methyl-substituted cyclopentane ring; (j) a chloride at the bridgehead of a bicyclic compound. A. Which give an SN2 substitution on treatment with alcoholic NaSH? B. Which give an E2 elimination with alcoholic KOH? C. Which do not react under either condition?

Solution. Answer (from key): A - c, d, e, f, h; B - b, c, f, i; C - a, g, j.
A needs an unhindered sp3 carbon with a leaving group (HS- is a good nucleophile, weak base). B needs a β-hydrogen and an sp3 C-X. (d), (e), (h) have no β-H so give substitution only; (b), (i) are tertiary so give elimination only; (a) is an aryl halide, (g) is neopentyl (no β-H and SN2 blocked), (j) is bridgehead.

Teacher's Note: Check each halide for β-hydrogen (E2) and steric access (SN2) separately.

Exam Note: Tabulate β-H and carbon class.

Question 2.13. Select which reaction in each pair will occur faster. Part 1: A, 1-iodo-1-methylcyclohexane + H2O/DMSO; B, iodocyclohexane + H2O/DMSO. Part 2: C, 1-chloro-1-methylcyclohexane + NaI/DMSO; D, cyclohexylmethyl chloride + NaI/DMSO. Part 3: E, iodocyclohexane + NaCl/DMSO; F, iodocyclohexane + NaCl/EtOH. Part 4: G, iodocyclohexane + NaN3/DMSO; H, bromocyclohexane + NaN3/DMSO. Part 5: I, benzyl chloride + NaI/acetone; J, p-bromotoluene + NaI/acetone.

Solution. Answer (from key): Part 1 - A; Part 2 - D; Part 3 - E; Part 4 - G; Part 5 - I.
1: the tertiary iodide ionises (SN1) faster. 2: primary D reacts by SN2, the tertiary C cannot. 3: nucleophile is stronger in aprotic DMSO than in protic ethanol. 4: iodide is a better leaving group than bromide. 5: benzyl chloride undergoes SN2 readily while the aryl bromide does not react.

Teacher's Note: Compare one variable per pair: substrate class, solvent, leaving group or sp2 carbon.

Exam Note: Name the single factor per part.

Question 2.14. Tick your answer: does each alkyl halide expect SN2 at a reasonable rate (Yes/No)? (a) 1-bromobutane; (b) 1-chlorobutane; (c) 2-bromobutane; (d) 2-chlorobutane; (e) 2-chloro-2-methylpropane; (f) bromocyclohexane; (g) bromobenzene; (h) benzyl bromide; (i) 1-bromo-2,2-dimethylpropane; (j) 1-bromobicyclo[2.2.1]heptane (bridgehead Br); (k) 1-bromotriptycene.

Solution. Answer (from key): Yes - a, b, c, d, f, h. No - e, g, i, j, k. The Yes group are primary or secondary sp3 halides with open back sides; the No group are tertiary (e), aryl (g), neopentyl (i) or bridgehead (j, k) halides where backside attack is impossible.

Teacher's Note: SN2 needs an accessible sp3 carbon; tertiary, neopentyl, aryl and bridgehead halides fail.

Exam Note: Give the blocking reason for each No.

Question 2.15. Match the column. Column I: (a) PhCHCl-CH3 (1-chloro-1-phenylethane); (b) o-ethylbenzyl chloride (CH2Cl on a benzene ring carrying an ethyl group ortho); (c) PhC(CH3)2Cl; (d) 2-fluoronitrobenzene (F ortho to NO2). Column II: (p) will undergo nucleophilic substitution; (q) E2; (r) E1; (s) SN2; (t) SN1.

Solution. Answer (from key): a - p, q, r, s, t; b - p, s, t; c - p, q, r, t; d - p.
(a) secondary benzylic with β-H can do all five; (b) primary benzylic, no β-H on the CH2Cl carbon, so substitution only (SN2 and SN1); (c) tertiary benzylic: no SN2; (d) aryl fluoride activated by o-NO2 undergoes nucleophilic aromatic substitution only.

Teacher's Note: Match each halide to mechanisms by carbon class, β-hydrogens and benzylic stabilisation.

Exam Note: Check β-H before assigning E1/E2.

Question 2.16. A dibenzodioxin carrying two -OEt groups on one of its benzene rings is treated with x HI. How many moles (x) of HI are consumed?

Solution. Answer (from key): 2. Each aryl ethyl ether (Ar-O-Et) is cleaved by HI to ArOH + EtI, using one mole of HI per Et-O bond, so two ethoxy groups consume 2 mol. The diaryl ether links of the dioxin ring are not cleaved because HI cannot attack an sp2 carbon.

Teacher's Note: HI cleaves alkyl-O bonds in aryl alkyl ethers, never aryl-O bonds.

Exam Note: Count only the two O-Et bonds.

Question 2.17. Match the column. Column I: (a) an optically active secondary benzylic chloride (Ph and Cl on the stereocentre, Fischer projection) + H2O; (b) 1-chlorobutane + PhSNa; (c) 2-fluoronitrobenzene + KOH, heat; (d) an alkene + Br2/CCl4. Column II: (p) SN1; (q) SN2; (r) carbocation is intermediate; (s) carbanion is intermediate.

Solution. Answer (from key): a - p, r; b - q; c - s; d - r. (a) water with a 2° benzylic chloride: SN1 via carbocation; (b) PhS- attacks a primary carbon: SN2; (c) nucleophilic aromatic substitution through a Meisenheimer carbanion; (d) electrophilic addition via a bromonium/carbocation intermediate.

Teacher's Note: Name the intermediate: carbocation (SN1, bromination), carbanion (SNAr).

Exam Note: Link mechanism to its intermediate.

Question 2.18. Match the reaction sequence (Column I) with the reagent required (Column II). (a) t-BuO- → t-BuOEt; (b) t-BuBr → isobutene; (c) isobutene → t-BuOEt; (d) Et-Cl → n-butane. Column II: (p) EtO-; (q) EtBr; (r) EtOH/H+; (s) Et-Cl/Na, ether.

Solution. Corrected: a - q; b - p; c - r; d - s. The printed key gives d - q, which is wrong: converting Et-Cl to n-butane is Wurtz coupling (2 EtCl + 2 Na, dry ether → C4H10 + 2 NaCl), reagent (s). (a) Williamson synthesis with a primary EtBr; (b) E2 with a strong base EtO-; (c) acid-catalysed addition of EtOH to the alkene via the t-butyl cation.

Teacher's Note: Williamson needs a primary halide with tertiary alkoxide; Wurtz couples two alkyl halides with Na.

Exam Note: Pick Wurtz (s) for Et-Cl to butane.

Question 2.19. Choose the one compound within each set that meets the criterion. Column I: (a) reacts with alcoholic KOH to liberate halide ion through substitution; (b) cannot be prepared by Williamson ether synthesis; (c) gives an acidic solution when allowed to stand in aqueous ethanol; (d) the ether that cleaves more rapidly in HI. Column II: (p) a fluorobenzene ring also carrying NO2 and CH3 (aryl fluoride with a nitro group); (q) PhOC2H5; (r) diphenyl ether type compound (Ph-O-C6H4F); (s) PhC(CH3)2Br.

Solution. Answer (from key): a - p; b - r; c - s; d - q. (a) the nitro-activated aryl fluoride undergoes SNAr by OH-; (b) a diaryl ether cannot be made because aryl halides do not undergo SN2; (c) the tertiary benzylic bromide solvolyses (SN1) to give HBr; (d) the alkyl aryl ether cleaves to PhOH + EtI, but the diaryl ether does not cleave.

Teacher's Note: Aryl halides react only when activated by o/p electron-withdrawing groups; diaryl ethers resist HI.

Exam Note: Match each statement to its structural feature.

JEE Mathematics: MS Chauhan Solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 a Alkyl Halides

Download MS Chauhan Solutions for JEE

Review detailed solutions for JEE Mathematics. The MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 a Alkyl Halides PDF provides comprehensive answers mapped to standard MS Chauhan Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Concept-Driven Math Answers

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these MS Chauhan Solutions for JEE Chemistry?

They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the MS Chauhan JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these MS Chauhan solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising MS Chauhan JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.