MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 b Alkyl Halides

MS Chauhan Solutions for JEE Chemistry: Chapter 05 b Alkyl Halides

Review structured textbook solutions for JEE Chemistry Chapter 05 b Alkyl Halides prepared by MS Chauhan. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Practice JEE Chemistry Solutions: Chapter 05 b Alkyl Halides

View or download the dedicated Chapter 05 b Alkyl Halides solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.

Alkyl Halides (Elimination Reactions: E1, E2, E1CB, Ei) - Chapter 5B, Levels 1 and 2

Level 1

Question 1. Which of the following alkyl halides gives only one product (excluding stereoisomers) when it undergoes E2 reaction? (a) 1-chloro-1-methylcyclohexane type tertiary chloride on a ring carbon bearing Cl (1-chlorocyclohexane carbon with a second ring substituent as drawn); (b) 2-chloro-1-methylcyclohexane; (c) 3-chloro-1-methylcyclohexane; (d) 4-chloro-1-methylcyclohexane.

Solution. (d). In the 1,4-disubstituted ring both β-carbons are equivalent by symmetry, so only one alkene (4-methylcyclohexene) forms.

Teacher's Note: Count distinct β-hydrogen sets; symmetry makes both β-carbons equivalent in the 1,4-isomer.

Exam Note: Symmetry gives one product.

Question 2. Alkyl halide CH3CH2CH2CH(X)CH3 (2-substituted pentane skeleton drawn) undergoes E2 to give a Hofmann product (1-ene) and a Saytzeff product (2-ene). (A) Maximum Saytzeff product is obtained when X is: (a) –I (b) –Cl (c) –Br (d) –F. (B) Hofmann product is major when X is: (a) –I (b) –Cl (c) –Br (d) –F.

Solution. (A) (a) –I; (B) (d) –F. Good leaving groups (I) give a late, alkene-like transition state and follow Saytzeff; the poor leaving group F gives a carbanion-like transition state, so the more acidic, less hindered H is removed (Hofmann).

Teacher's Note: Transition-state character depends on leaving-group ability: I gives Saytzeff, F gives Hofmann.

Exam Note: F as leaving group gives Hofmann.

Question 3. Morpholine (P, a six-membered ring containing O and N–H) undergoes Hoffmann exhaustive methylation (twice). The product is: (a) divinyl ether, CH2=CH–O–CH=CH2 drawn as the O-containing diene; (b) divinylamine; (c) a diene with no heteroatom; (d) 1,3-butadiene type.

Solution. (a). Each HEM cleaves one C–N bond with β-elimination; two cycles remove N as trimethylamine and leave the oxygen, giving divinyl ether.

Teacher's Note: Each HEM cycle opens one C–N bond; O stays, N leaves as Me3N.

Exam Note: Two HEM cycles remove N.

Question 4. (syn)-2-phenylcyclohexyl dimethylamine oxide and its (anti) isomer undergo Ei on heating: syn gives (A) 98%, anti gives (B) 85%. P = 3-phenylcyclohexene (double bond away from Ph side, i.e. 3-phenyl-cyclohexene) and Q = 1-phenylcyclohexene. Products (A) and (B) are: (a) A = Q, B = P (b) A = Q, B = Q (c) A = P, B = Q... as printed options: (a) A = P, B = P (b) A = Q, B = Q (c) A = P, B = Q (d) A = Q, B = P.

Solution. (c) A = P, B = Q. Ei needs a syn-coplanar H on the adjacent carbon: the syn isomer has a syn H only on the ring side giving P; in the anti isomer the syn H is the benzylic one, giving the conjugated Q.

Teacher's Note: Ei is a syn elimination through a five-membered cyclic transition state.

Exam Note: Ei removes syn-H only.

Question 5. trans-2-methylcyclohexyl tosylate (OTs and CH3 on adjacent carbons, OTs axial, as drawn) with HO–/Δ gives the major product: (a) 1-methylcyclohexene (b) 3-methylcyclohexene (c) methylenecyclohexane (d) methylcyclohexane.

Solution. (b). E2 needs an anti-periplanar H; in the drawn stereochemistry the H on the CH3-bearing carbon is not anti to OTs, so the less substituted 3-methylcyclohexene forms.

Teacher's Note: In cyclohexanes, E2 needs anti-periplanar H–C–C–X; check which H is trans-diaxial.

Exam Note: Stereochemistry overrides Saytzeff.

Question 6. Which of these dehydrates most easily? (a) CH3CH2CH2OH (b) 1-methylcyclohexanol (c) phenol (d) (CH3)3CCH2OH.

Solution. (b). The tertiary alcohol gives the most stable (tertiary) carbocation in the E1 dehydration.

Teacher's Note: Acid dehydration rate follows carbocation stability: 3° > 2° > 1°.

Exam Note: 3° alcohol dehydrates fastest.

Question 7. cis/trans-1-bromo-... A bromo-dimethylcyclohexane (Br axial with two CH3 groups, as drawn) with NaOCH3/CH3OH (E2). Product is: (a) 1,3-dimethyl-type alkene (b) isomeric alkene (c) methoxy substitution product (d) No reaction.

Solution. (d) No reaction (answer from key). In the drawn conformation no β-hydrogen is anti-periplanar to the leaving Br, so E2 cannot occur.

Teacher's Note: Anti-periplanar H is mandatory for E2 in rigid chair conformers.

Exam Note: No anti H means no E2.

Question 8. (1-methylcyclohexyl)trimethylammonium ion (quaternary ammonium on a ring carbon bearing CH3) with HO–/Δ gives the major product A: (a) 1-methylcyclohexene (b) methylenecyclohexane (c) 3-methylcyclohexene (d) 3-methylenecyclohexene.

Solution. (b) methylenecyclohexane. Quaternary ammonium salts follow Hofmann's rule: the least substituted alkene, from the most acidic, least hindered CH3 hydrogens.

Teacher's Note: Bulky NMe3+ leaving group gives Hofmann product.

Exam Note: Ammonium salts give the Hofmann alkene.

Question 9. A spiro alcohol (cyclohexane–cyclopentane spiro compound with OH on the ring carbon next to the spiro carbon) with H2SO4/Δ gives the major product A: options (a)–(d) are fused-ring alkenes.

Solution. (c). The secondary carbocation undergoes ring expansion (alkyl shift) to give a more stable tertiary cation, which loses H+ to give the most substituted (tetrasubstituted) alkene of the fused bicyclic system.

Teacher's Note: Ring expansion of a cyclopentyl carbocation relieves strain and gives a 3° cation.

Exam Note: Rearrange first, then Saytzeff.

Question 10. In which of the following reactions is the Saytzeff alkene the major product? (a) CH3CH2C(CH3)2NMe3+ with HO–/Δ; (b) 2-fluoropentane with EtO–/Δ; (c) 2-bromo-2-methylbutane with t-BuOK/Δ; (d) 3-bromo-3-methylhexane with CH3OK/Δ.

Solution. (d). A tertiary bromide with a small base (methoxide) follows Saytzeff. (a) ammonium, (b) fluoride and (c) bulky t-BuOK all favour the Hofmann product.

Teacher's Note: Saytzeff needs a good leaving group and a small base; ammonium, F and bulky bases give Hofmann.

Exam Note: Small base plus Br gives Saytzeff.

Question 11. (Fischer projection) Ph–C(CH3)(H)–C(CH3)(Br)–Ph arrangement with alc. KOH (E2). Major product is: (a)–(d) stereoisomeric alkenes (Ph)(CH3)C=C(CH3)(Ph) and others; (d) is an alcohol.

Solution. (c). Anti elimination of H and Br from the given diastereomer gives the stereospecific alkene in which the two Ph groups are trans to each other as drawn in option (c).

Teacher's Note: Anti elimination from a Fischer projection: eclipse H and Br anti, read alkene geometry.

Exam Note: E2 is stereospecific (anti).

Question 12. The conversion of 2,3-dibromobutane to 2-butene with Zn is: (a) redox reaction (b) α-elimination (c) β-elimination (d) both α-elimination and redox reaction.

Solution. (c) β-elimination. Zn removes the two vicinal Br atoms (it is also a redox change, but the key marks (c); the two halogens sit on adjacent carbons, i.e. β-elimination).

Teacher's Note: Vicinal dihalide plus Zn forms an alkene by removing halogens from adjacent carbons.

Exam Note: Vicinal dihalide + Zn gives alkene.

Question 13. 1,3-Dibromopropane is heated with zinc dust in ether. The product formed is: (a) propene (b) propane (c) cyclopropane (d) 3-bromopropane.

Solution. (c) cyclopropane. Zn removes both Br atoms and the two ends join (1,3-elimination / Wurtz-type cyclisation).

Teacher's Note: 1,3-Dihalides with Zn close a three-membered ring.

Exam Note: 1,3-Dibromide + Zn gives cyclopropane.

Question 14. Reactions (1), (2), (3): 4-bromo-, 5-bromo- and 6-bromo-substituted cyclohex-2-enones (Br at three different positions relative to the C=O and C=C) each with alc. KOH to give major products (A), (B), (C). (a) A = B but C is different (b) A = C but B is different (c) B = C but A is different (d) A = B = C, all products identical.

Solution. (d). All three bromo-ketones lose HBr to give the same conjugated product, cyclohexa-2,5-dienone/ketone-containing diene (phenol tautomer route) as printed; all products are identical.

Teacher's Note: Different positions of Br can converge to the same conjugated dienone.

Exam Note: Compare final structures, not routes.

Question 15. Reactions (1), (2), (3): three stereoisomers of 1,2,3,4,5,6-hexachlorocyclohexane each with 3 mol alc. KOH give (A), (B), (C). Products: (a) A = B, C different (b) A = C, B different (c) B = C, A different (d) A = B = C, same.

Solution. (d). Each isomer loses 3 HCl to give the same product, trichlorobenzene (1,2,4-trichlorobenzene).

Teacher's Note: Complete dehydrohalogenation of any C6H6Cl6 isomer gives trichlorobenzene.

Exam Note: Stereoisomers can converge on one aromatic product.

Question 16. A bromoalkane (drawn skeleton with Br on a carbon next to a quaternary centre) with alc. KOH: x is the number of E2 products obtained (including stereoisomers). (a) 3 (b) 4 (c) 5 (d) 6.

Solution. (c) 5 (answer from key).

Teacher's Note: Count each β-carbon alkene plus cis/trans forms.

Exam Note: Include stereoisomers in the count.

Question 17. (CH3)3C–CH(Br)–CH3 with EtOH/Δ gives the major product (A): (a) 3,3-dimethylbut-1-ene (b) 2,3-dimethylbut-2-ene (c) 2,3-dimethylbut-1-ene (d) 2,3-dimethylbutane type.

Solution. (b) 2,3-dimethylbut-2-ene. Ionisation gives a 2° cation that rearranges by methyl shift to a 3° cation, and E1 gives the most substituted (tetrasubstituted) alkene.

Teacher's Note: Solvolysis proceeds via carbocation: expect a 1,2-methyl shift, then Saytzeff.

Exam Note: E1 gives rearranged Saytzeff alkene.

Question 18. Which compound is least susceptible to elimination of HBr? (a) BrCH2CH2NO2 (b) BrCH2CH2CH3 (c) BrCH2CH2CN (d) BrCH2CH2CO2Et.

Solution. (b). In (a), (c) and (d) the β-H is acidified by NO2, CN and CO2Et (E1cB-like), so they eliminate readily; (b) has an ordinary β-H.

Teacher's Note: Electron-withdrawing groups on the β-carbon speed E2/E1cB.

Exam Note: EWG on β-C speeds elimination.

Question 19. The quaternary ammonium hydroxide of 1-methylcyclopentyl-trimethylammonium on heating gives two alkenes X (91%) and Y (9%). Structures X and Y respectively: (a) 1-methylcyclopentene and 3-methylcyclopentene... as printed (a)–(d) options.

Solution. (c). X = methylenecyclopentane (Hofmann, 91%) and Y = 1-methylcyclopentene (Saytzeff, 9%).

Teacher's Note: Hofmann elimination favours the exocyclic CH2 hydrogens (more acidic, less hindered).

Exam Note: Hofmann is major from ammonium.

Question 20. In the dehydrohalogenation of 2-bromobutane, which conformation (Newman projections a–d) leads to cis-2-butene?

Solution. (a). Anti-periplanar H and Br with the two CH3 groups gauche (same side) in the product plane give cis-2-butene.

Teacher's Note: Draw the anti H–C–C–Br conformer and see whether the two CH3 end up cis.

Exam Note: Anti elimination fixes alkene geometry.

Question 21. trans-1,4-dihydroxycyclohexane (cyclohexane-1,4-diol) + CH3COCl (2 mol)/pyridine gives (A), which on heating (Ei) gives (B) + CH3CO2H. Product (B) is: (a) cyclohexa-1,3-diene (b) benzene (c) 3-methylene-type diene (d) 4-methylenecyclohexene type.

Solution. (b) as per key: the diacetate undergoes Ei twice, losing two CH3CO2H... Answer (from key): (b).

Teacher's Note: Ester pyrolysis (Ei) removes acetic acid via a syn cyclic transition state.

Exam Note: Ei gives a syn elimination.

Question 22. Me2CHCH2NHCH2CH2Me undergoes Hoffmann exhaustive methylation: (i) CH3I excess, (ii) Ag2O, (iii) Δ. Product: (a) CH3CH=CH2 (b) CH2=CH2 (c) 2-methylpropene (d) 3-methylbut-1-ene.

Solution. (a) propene (answer from key). The ammonium salt Me2N+(CH2CH2CH3)(CH2CHMe2)... the most acidic, least hindered β-H is removed to give the least substituted alkene.

Teacher's Note: Hofmann: remove β-H from the least substituted (most acidic) carbon.

Exam Note: Hofmann alkene is least substituted.

Question 23. 2-(hydroxymethyl)... A fulvene-type cyclopentene carrying CH2OH (cyclopent-2-enylmethanol with ring double bond) with H+/Δ gives (A): (a) fulvene-type (b) benzene (c) cyclohexa-1,3-diene (d) cyclohexa-1,4-diene.

Solution. (b) benzene (answer from key). Loss of water gives a primary cation, ring expansion gives a cyclohexenyl cation, and loss of H+ leads to the aromatic product.

Teacher's Note: Ring expansion plus aromatisation is the driving force.

Exam Note: Aromatic stabilisation drives rearrangement.

Question 24. cis/trans-4-methylcyclohexanol with H+/Δ; products obtained are: (a) racemic (b) diastereomers (c) geometrical isomers (d) positional isomers.

Solution. (a) racemic (answer from key). E1 dehydration gives 4-methylcyclohex-1-ene, which is chiral, and is formed as an equal mixture of both enantiomers.

Teacher's Note: Dehydration via planar cation gives both enantiomers of the chiral alkene.

Exam Note: Achiral reagent forms a racemate.

Question 25. A menthyl-type chloride (1-methyl-4-isopropylcyclohexane skeleton with Cl as drawn, Cl axial) with NaOEt (E2). Major product: options (a)–(d) are isomeric menthenes.

Solution. (b). Anti-periplanar elimination (trans-diaxial H and Cl) fixes which double bond forms; the key marks (b).

Teacher's Note: Rigid chair: only trans-diaxial H eliminates.

Exam Note: E2 needs trans-diaxial H and X.

Question 26. Menthyl-type chloride (diastereomer of Q25, Cl equatorial-type as drawn) with NaOEt (E2). Major product: options (a)–(d) are isomeric menthenes.

Solution. (a) (answer from key). For this isomer the only anti-periplanar H gives the less substituted alkene.

Teacher's Note: Check ring flip: the Cl must be axial for E2.

Exam Note: Ring flip may be needed.

Question 27. The E2 product of a chair bromomethylcyclohexane (Br axial, CH3 as drawn) with NaOH will be: (a) cyclohexanol drawn as chair (b) isomeric cyclohexanol (c) cyclohexene drawn in half-chair (d) isomeric cyclohexene.

Solution. (d). E2 gives the alkene in which the double bond forms toward the anti-periplanar H; options (a) and (b) are substitution products.

Teacher's Note: E2 gives an alkene, not an alcohol.

Exam Note: Alkene means elimination.

Question 28. An alkyl halide C5H11Br on treatment with alc. KOH gives 2-pentene only. The halide is: (a) 1-bromopentane (b) 2-bromopentane (c) 3-bromopentane (d) 2-bromo-3-methylbutane.

Solution. (c) 3-bromopentane. Both β-carbons are CH2 groups, so only pent-2-ene (cis and trans) forms; 2-bromopentane would also give pent-1-ene.

Teacher's Note: Symmetrical secondary halide gives only the 2-ene.

Exam Note: Symmetry limits the products.

Question 29. 1,4-Dibromocyclohex-2-ene... 3,6-dibromocyclohexene with (CH3)2NH (2 molar equiv) gives (A), then BaO gives (B), then CH3I (2 molar equiv) gives (C), then Ag2O/H2O gives (D) + (CH3)3N. End product (D): (a) 3,6-dimethylene-cyclohexene (b) benzene (c) cyclohexa-2,5-dienone (d) 4-methylphenol.

Solution. (b) benzene (answer from key). Substitution by the amine, quaternisation, and Hofmann elimination steps ultimately remove both nitrogens to give benzene.

Teacher's Note: Track N removal: each HEM step lowers saturation.

Exam Note: Aromatisation is the end point.

Question 30. For each pair of E2 reactions select the one with the greater rate constant: (1) CH3CH2CH2Cl + t-BuO– versus (2) CH3CH2CH2I + t-BuO–; (3) 2-bromopropane + CH3O– versus (4) 2-bromopropane + CH3S–; (5) PhCH2CH(Br)CH2CH3-type with HO– versus (6) other positional bromide. Options: (a) 2, 4, 6 (b) 1, 3, 5 (c) 2, 3, 5 (d) 2, 4, 5.

Solution. (c) 2, 3, 5. Iodide leaves faster than chloride (2 > 1); methoxide is the stronger base so it is the better E2 reagent versus methanethiolate (3 > 4); (5) as per key.

Teacher's Note: Rate rises with better leaving group and stronger base (E2).

Exam Note: I leaves faster; stronger base eliminates.

Question 31. CH3–CBr2–CBr2... the tetrabromo compound CH3–C(Br)(Br)–C(Br)(Br)–CH3 type with x mol NaNH2 then y mol CH3I gives CH3–C≡C–C≡C–CH3. x and y are moles consumed. Value of x + y = (a) 5 (b) 6 (c) 7 (d) 8.

Solution. (d) 8 (answer from key).

Teacher's Note: Count moles of base for each HX removed plus alkyl halide for each acetylide alkylation.

Exam Note: Each HX needs one mole of base.

Question 32. E2 of 2-X-hexane with CH3O–: yields of 2-hexene/1-hexene are X = I 81/19, Br 72/28, Cl 67/33, F 30/70 (conjugate acid pKa: I –10, Br –9, Cl –7, F 3.2). Which statements are true? (a) I– is the best and F– the poorest leaving group (b) with I, Br, Cl Zaitsev's rule is followed (c) F– is the strongest base (poorest leaving group), transition state has least double-bond character (d) a, b, c are true.

Solution. (d). All three statements follow from the data: lower pKa of HX means better leaving group; I, Br and Cl give mainly the 2-ene; with F the transition state is carbanion-like so Hofmann product (70%) predominates.

Teacher's Note: Leaving-group quality tracks conjugate-acid strength; poor leaving group gives Hofmann.

Exam Note: All three statements are true.

Question 33. A trans-substituted cyclopentane ring bearing N(CH3)2 and D/H labels (as drawn) undergoes (1) CH3I, (2) Ag2O, (3) Δ to give A (Hofmann) and (1) H2O2, (2) Δ to give B (Cope/Ei). Products A and B respectively are shown in options (a)–(d) as deuterium-labelled cyclopentenes.

Solution. (a). Hofmann (anti) elimination removes the H/D that is anti; the amine-oxide route (Ei) is syn, so it removes the other label; the two labelled alkenes differ in whether D is retained.

Teacher's Note: Hofmann is anti, Cope/amine-oxide is syn: follow the isotope label.

Exam Note: Compare syn versus anti H removal.

Question 34. Tropane-type bicyclic N-methylamino alcohol with conc. H2SO4 gives (A); then (1) MeI, (2) AgOH, (3) Δ gives (B); then again gives (C). Product in the above reaction: (a) cycloheptatriene (b) cycloheptadiene (c) dimethylamino-cycloheptadiene (d) benzene.

Solution. (a) cycloheptatriene (answer from key). Dehydration gives a tropidine-type alkene; two Hofmann eliminations remove the nitrogen and give cycloheptatriene.

Teacher's Note: Each HEM opens one ring C–N bond; two cycles remove N from a bicyclic amine.

Exam Note: Count C–N bonds to break.

Question 35. Major product obtained from 1-phenyl-2-bromobutane with NaOMe is: (a) (E)-1-phenylbut-1-ene (b) (E)-1-phenylbut-2-ene (c) 1-phenyl-2-ethoxybutane type ether (d) (Z)-1-phenylbut-2-ene.

Solution. (a). The benzylic β-hydrogen is more acidic and elimination gives the alkene conjugated with the benzene ring; the E isomer is more stable.

Teacher's Note: Conjugation with the ring overrides ordinary Saytzeff selectivity.

Exam Note: Conjugated, E-alkene is major.

Question 36. Which alkyl halide gives the most complex mixture of alkenes in an E2 reaction? (a) 1-bromobutane (b) 2-bromopentane (c) 3-bromopentane (d) 2-bromo-2-methylbutane.

Solution. (b). 2-Bromopentane can give pent-1-ene, cis-pent-2-ene and trans-pent-2-ene, the greatest variety among the options.

Teacher's Note: Count positional plus geometrical isomers of the possible alkenes.

Exam Note: Include cis/trans isomers.

Question 37. A deuterated cyclohexane with Br, CH3, H and D substituents (stereochemistry as drawn) with alc. KOH gives major product (A): options (a)–(d) are isomeric cyclohexenes (one retaining D, one alcohol, etc.).

Solution. (c) (answer from key). Anti elimination of the axial Br with the anti H (not D) gives the deuterium-retaining alkene shown in (c); (b) is an alcohol, so it cannot be an E2 product.

Teacher's Note: Anti H is removed; D stays in the product if it is not anti.

Exam Note: Isotope effect: D stays if not anti.

Question 38. 1,1... 2,2-dimethylcyclohexanol with H⊕/Δ gives (A); 1-isopropylcyclohexanol-type tertiary alcohol with H⊕/Δ gives (B). Sum of the number of α-hydrogens present in compounds A + B is: (a) 18 (b) 19 (c) 20 (d) 21.

Solution. (c) 20 (answer from key).

Teacher's Note: Identify the major (most substituted) alkene, then count allylic (α) hydrogens.

Exam Note: Count α-H on the major alkene.

Question 39. (A) with (1) excess CH3I/K2CO3, (2) Ag2O/H2O, (3) Δ gives (B); (B) with excess CH3I/K2CO3, Ag2O, Δ gives CH2=CH–CH(CH3)–CH=CH2. Identify A: (a) piperidine (b) 3-methylpiperidine (c) 4-methylpiperidine (d) 2-methylpiperidine.

Solution. (c) 4-methylpiperidine (answer from key). Two HEM steps cleave both ring C–N bonds; the product CH2=CH–CH(CH3)–CH=CH2 has the methyl on the central carbon, so the original ring methyl was 4 to N.

Teacher's Note: Rebuild the ring: join the two terminal vinyl carbons through N.

Exam Note: Reconnect the ends through N.

Question 40. CH3CH2–C(Br)(CH2CH2CH3)–CH2CH3-type tertiary bromide (3-bromo-3-ethylhexane, with n-Pr = n-propyl) with alc. KOH gives major product (A): options (a)–(d) are E/Z isomers of the trisubstituted alkene.

Solution. (c) (answer from key): the Saytzeff trisubstituted alkene with the geometry having the larger groups trans.

Teacher's Note: Pick the more stable stereoisomer: larger groups on opposite sides.

Exam Note: Saytzeff and E-like geometry.

Question 41. 2-Phenyl-3-methylcyclohexanol-type alcohol (OH on ring carbon next to the C–Ph carbon) with H3PO4/Δ: major product of dehydration: options (a)–(d) are phenyl-methyl-cyclohexenes.

Solution. (c) (answer from key): the alkene conjugated with the phenyl ring, most substituted.

Teacher's Note: Conjugation with Ph decides the major alkene.

Exam Note: Prefer the conjugated alkene.

Question 42. A bromo-epoxy-cyclohexane (trans-dibromo epoxide as drawn) with NaOCH3 (2 mole)/CH3OH gives (A), then H3O⊕ gives (B). Product (B): (a) cyclohexadienediol (b) phenol (c) 3-methoxyphenol (d) resorcinol.

Solution. (b) phenol (answer from key). Double dehydrobromination gives a cyclohexadiene epoxide (arene oxide), which isomerises in acid to phenol (NIH shift route).

Teacher's Note: Arene oxide opens in acid to phenol.

Exam Note: Arene oxide gives phenol.

Question 43. Ph–CH(Br)–CH2–CH2Br with Zn–Cu/Δ gives: (a) PhCH=CHCH2Br (b) phenylcyclopropane (c) PhCHBrCH=CH2 (d) PhC≡CCH3.

Solution. (b) phenylcyclopropane. Zn removes both Br atoms of the 1,3-dibromide and the carbons bond to close the three-membered ring.

Teacher's Note: 1,3-Dibromide with Zn closes a cyclopropane ring.

Exam Note: 1,3-Dibromide gives cyclopropane.

Question 44. A cyclohexenediol with a methyl group (OH on ring carbons, methyl substituents as drawn) with H⊕/Δ gives (A): (a) m-xylene (b) o-xylene (c) ethylbenzene (d) p-xylene.

Solution. (a) m-xylene (answer from key). Double dehydration gives an aromatic ring, with the substituent positions retained.

Teacher's Note: Double dehydration of a cyclohexenediol aromatises.

Exam Note: Aromatisation drives dehydration.

Question 45. A Newman projection of Ph(Me)CH–CH(Ph)–NMe3⊕ with H, Ph, Me, NMe3⊕ as drawn, treated with NaOEt/Δ. Major product: options include triphenylethene and (Ph)(Me)C=CH(Ph) isomers.

Solution. (c). Anti elimination from the given conformer gives the stereospecific alkene (Ph)(Me)C=CH(Ph) with the geometry shown in (c).

Teacher's Note: Anti elimination from a Newman projection: read off which groups end up cis.

Exam Note: Anti elimination sets the geometry.

Question 46. A hydrazone-type compound (cyclohexyl butyl ketone N-phenethylamino imine) with LDA gives A + N2 + PhCH=CH2. Product A is: options (a)–(d) are isomeric alkenes/dienes of cyclohexyl and propyl chains.

Solution. (a) (answer from key). This is the Shapiro-type/diazene fragmentation giving the terminal-position alkene shown in (a).

Teacher's Note: Fragmentation loses N2 and styrene and leaves the alkene.

Exam Note: Loss of N2 drives fragmentation.

Question 47. N-substituted amine (cyclohexyl amine bearing alkyl branches as drawn) undergoes Hoffmann exhaustive methylation. Major product: (a) alkylidenecyclohexane (b) allyl-type cyclohexyl alkene (c) cyclohexene (d) CH2=CH2.

Solution. (d) CH2=CH2 (answer from key). In Hofmann elimination the least hindered β-H is removed, giving ethene.

Teacher's Note: Hofmann prefers removal of H from the least substituted β-carbon (CH3 of ethyl).

Exam Note: Hofmann rule: ethyl group gives ethene.

Question 48. A methylcyclopentanol drawn in perspective (OH and substituents as drawn) with POCl3/pyridine gives the major product: (a) methylcyclopentene with double bond toward CH3 carbon (b) alternate alkene (c) cyclohexene (d) chloride substitution product.

Solution. (b) (answer from key). POCl3/pyridine is an E2 dehydration, so the anti-periplanar H is removed (no carbocation, no rearrangement).

Teacher's Note: Pyridine/POCl3 gives E2, not E1.

Exam Note: POCl3/pyridine is E2.

Question 49. Ph(1-naphthyl)C=CH–C(OH)Ph(1-naphthyl) with H+/Δ: stereochemistry of the product is: (a) meso (b) racemic mixture (c) diastereomer (d) optically pure enantiomers.

Solution. (b) racemic mixture. Dehydration via a planar carbocation (a cyclisation/dienyl cation) gives equal amounts of both enantiomers.

Teacher's Note: Planar cation intermediates give racemic products.

Exam Note: Planar cation gives a racemate.

Question 50. The product is a bicyclic lactone (a fused butenolide with CH3). Which reactant (bromo lactone, options a–d with different stereochemistry) is used to obtain compound (A)? (Assume EtO– is used.)

Solution. (a) (answer from key). E2 needs anti-periplanar H and Br; only the stereoisomer in (a) has H anti to Br at the required ring carbon.

Teacher's Note: Match stereochemistry: anti H/Br needed on the correct ring carbon.

Exam Note: E2 stereochemistry selects the reactant.

Question 51. trans-2-chlorocyclohexanol-type (Cl and OH on adjacent ring carbons as drawn) with alc. KOH gives (A): (a) cyclohex-2-en-1-ol (b) cyclohexene oxide (epoxide) (c) cyclohexanone (d) 1-chlorocyclohexene.

Solution. (c) cyclohexanone (answer from key). Under strongly basic conditions the chlorohydrin forms an epoxide or, via hydride shift, the ketone shown in the key.

Teacher's Note: Chlorohydrin plus base can give epoxide or carbonyl compound.

Exam Note: Check the key product, not just the epoxide.

Question 52. Rank the following in order of decreasing E2 rate: (a) cis-1-bromo-2-methylcyclohexane type (b) trans isomer with axial Br (c) another diastereomer. (a) a > b > c (b) c > a > b (c) c > b > a (d) b > a > c.

Solution. (b) c > a > b (answer from key). Rate depends on how readily the ring adopts the conformation with Br axial and an anti-periplanar H available.

Teacher's Note: The more stable conformer with axial Br eliminates fastest.

Exam Note: Axial leaving group is required.

Question 53. 1-Fluoro-1-phenylpropane-type fluoride PhCH2CH(F)CH3 with KOH/EtOH/Δ: (A) major is (a) PhCH2CH=CH2 (b) PhCH=CHCH3 (c) ethyl ether (d) alcohol.

Solution. (b) PhCH=CHCH3 (answer from key). Despite F being a poor leaving group, the benzylic β-H is acidic and the product is conjugated with the ring.

Teacher's Note: Conjugation plus acidic benzylic H gives the styrene-type alkene.

Exam Note: Conjugated alkene is favoured.

Question 54. 2-Bromobutane with EtO⊖/Δ gives (A) major; 2-butyltrimethylammonium with EtO⊖/Δ gives (B) major. Relation between A and B: (a) geometrical isomers (b) positional isomers (c) enantiomers (d) chain isomers.

Solution. (b) positional isomers. A = but-2-ene (Saytzeff), B = but-1-ene (Hofmann); the double bond is in different positions.

Teacher's Note: Br follows Saytzeff, NMe3+ follows Hofmann.

Exam Note: Different leaving groups, different alkenes.

Question 55. 2-(chloromethyl)tetrahydrofuran with 3 NaNH2/liq. NH3: product is (a) 2-methylene-2,3-dihydrofuran (b) HC≡C–(CH2)3ONa (c) NaC≡C–(CH2)3ONa (d) HC≡C–(CH2)3OH.

Solution. (b) HC≡C–(CH2)3ONa (answer from key): ring-opening E2-type elimination with excess amide gives the alkoxide-substituted terminal alkyne.

Teacher's Note: Amide bases open the ring by β-elimination of the ether oxygen.

Exam Note: Excess NaNH2 gives alkynes.

Question 56. PhC(CH3)(CD3)Br (chiral, Br on a stereocentre) with K+ t-BuO– (E2) gives a product. Which best describes it? (a) absolute configuration inverted (b) retained (c) racemisation (d) loss of chirality (the product is achiral).

Solution. (d). E2 removes an H or D from a methyl group giving the alkene PhC(CH3)=CD2 (or PhC(=CH2)CD3), which has no stereocentre.

Teacher's Note: The stereocentre becomes sp2; the alkene has no chirality.

Exam Note: Alkene product is achiral.

Question 57. CH3CH2–C(OH)(CH3)–CH(CH3)2 with H+/Δ: major product is (a)–(d) alkenes: (d) is 3,4-dimethylhex-3-ene... as drawn the tetrasubstituted CH3CH2(CH3)C=C(CH3)2.

Solution. (d). Tertiary cation forms and loses the H from the adjacent tertiary carbon, giving the most substituted (tetrasubstituted) alkene.

Teacher's Note: E1 gives the most substituted alkene (Saytzeff).

Exam Note: Pick the tetrasubstituted alkene.

Question 58. What will be the major product of each of the two reactions? 1. CH3CH2CH(N+(CH3)3OH–)CH3 with heat; 2. CH3CH2CH(Br)CH3 + CH3CH2ONa with heat. X = CH3CH=CHCH3, Y = CH3CH2CH=CH2. (a) 1–X, 2–X (b) 1–Y, 2–X (c) 1–X, 2–Y (d) 1–Y, 2–Y.

Solution. (b). Reaction 1 (Hofmann, ammonium) gives Y; reaction 2 (Saytzeff, bromide with small base) gives X.

Teacher's Note: Ammonium gives Hofmann, bromide with ethoxide gives Saytzeff.

Exam Note: Compare leaving groups.

Question 59. N-ethylcyclohexylamine + CH3I (excess) gives a product: (a) primary amine (b) tertiary amine (c) secondary amine (d) quaternary ammonium salt.

Solution. (d) a quaternary ammonium salt. Excess CH3I exhaustively methylates the nitrogen.

Teacher's Note: Excess MeI goes all the way to the quaternary salt.

Exam Note: Exhaustive methylation gives quaternary salt.

Question 60. (Cyclohexa-2,4-dienyl)methanol (cyclohexadiene bearing CH2OH) with H+/Δ gives (A), which on heating isomerises to (B). Structure of (B): (a) 5-methylenecyclohexa-1,3-diene (b) toluene (c) isomeric methylene-diene (d) phenol.

Solution. (b) toluene. Dehydration gives a methylenecyclohexadiene (A), which isomerises by H-shift to aromatic toluene.

Teacher's Note: Aromatisation is the driving force for the isomerisation.

Exam Note: Isomerisation gives aromatic toluene.

Question 61. A tetralin carrying CHPh2 and CH2CH2OH side chain (as drawn) with H+/Δ gives major product (A): options (a)–(d) are alkenes/alcohol.

Solution. (a) (answer from key). A 1,2-hydride shift gives a very stabilised diphenyl-substituted cation, and loss of H+ gives the highly conjugated alkene (a).

Teacher's Note: Hydride shift to a diaryl-stabilised cation, then deprotonation.

Exam Note: Rearrange to the most stable cation.

Question 62. Which of the following carbocations will undergo rearrangement? (a) 3-methylcyclohexyl cation (b) 1-isopropylcyclopentyl-type secondary cation (c) CH3CH(CH3)CH–C+=O type acylium (d) CH3NH–C+H–CH(CH3)2.

Solution. (b) (answer from key). The secondary cation adjacent to a tertiary C–H can rearrange by hydride shift to a tertiary cation; (c) and (d) are already stabilised by resonance.

Teacher's Note: Rearrangement happens only if it gives a more stable cation.

Exam Note: Shift only if cation gets more stable.

Question 63. In which reaction will a resonance-stabilised product form? (a) cyclohexenylmethanol with H+/Δ (b) cyclohexenol with H+/Δ (c) a methyl-tetralol (2-methyl-tetralin-2-ol) with H+/Δ (d) all of these.

Solution. (d) all of these. Each dehydration gives a conjugated/aromatic (resonance-stabilised) product.

Teacher's Note: Check whether the new double bond conjugates with ring or other C=C.

Exam Note: Conjugation stabilises the product.

Question 64. In which reaction does rearrangement take place with change in carbon skeleton? (a) neopentyl cation (CH3)3CCH2+ (b) n-propyl cation (c) isobutyl-type primary cation CH3CH(CH3)CH2CH2+ (d) isopropyl cation.

Solution. (a). The methyl shift in the neopentyl cation changes the carbon skeleton to the 2-methylbutan-2-yl cation; the others rearrange only by hydride shift (no change of skeleton) or not at all.

Teacher's Note: A methyl shift alters the skeleton; a hydride shift does not.

Exam Note: Alkyl shift changes the skeleton.

Question 65. Consider (CH3)3C–CH(OH)–CH3 with H3PO4/heat giving (CH3)2C=C(CH3)2 + a second alkene. Which response lists all correct statements? (1) Dehydration (2) E2 mechanism (3) carbon-skeleton migration (4) most stable alkene will form (5) single-step reaction. (a) 1, 3 (b) 1, 2, 3 (c) 1, 2, 5 (d) 1, 3, 4.

Solution. (d) 1, 3, 4. It is a dehydration that goes through a carbocation (E1) with methyl shift (skeleton migration) and gives the most stable alkene; it is not E2 nor single-step.

Teacher's Note: Acid dehydration of 2° alcohols is E1 with possible shifts.

Exam Note: Acid dehydration is E1, not E2.

Question 66. (Fischer) CH3–CH(Br)–CH(OH)–CH3 (erythro/threo drawn) with HBr gives (X), then NaI/acetone gives (Y) (major). Product (Y): (a) cis-2-butene (b) trans-2-butene (c) 1-butene (d) isobutene.

Solution. (b) trans-2-butene. HBr converts OH to Br with inversion/stereo-control, and NaI/acetone causes anti elimination of the vicinal dibromide, giving the stereospecific trans alkene.

Teacher's Note: Vicinal dibromide plus I– gives an anti elimination.

Exam Note: NaI debromination is anti.

Question 67. BrCH2–CH=CH–CH2Br with Zn (dust) is a 1,4-elimination. Product (A): (a) CH3CH=C=CH2 (b) CH3C≡CCH3 (c) CH3CH2C≡CH (d) CH2=CH–CH=CH2.

Solution. (d) 1,3-butadiene. Zn removes the two terminal Br atoms with the double bond shifting.

Teacher's Note: 1,4-Elimination shifts the double bond: butene-diyl dibromide gives a diene.

Exam Note: 1,4-Elimination gives a conjugated diene.

Question 68. (2-Biphenylyl)diphenylcarbinol, Ph–C(OH)(Ph) attached to the ortho position of biphenyl, with conc. H2SO4: major product is (a) a 9-phenyl-fluorene isomer (b) 9,9-diphenylfluorene (c) 9-phenyl-fluorene with one Ph (d) none of these.

Solution. (b) 9,9-diphenylfluorene. The tertiary carbocation attacks the neighbouring ring (intramolecular Friedel–Crafts alkylation), closing the five-membered ring.

Teacher's Note: Cation plus a nearby aryl ring closes a ring (Friedel–Crafts).

Exam Note: Cyclisation gives 9,9-diphenylfluorene.

Question 69. (A) Ph–C(OH)(Ph)... the pinacols (A) Ph2C(OH)–C(OH)(CH3)Ph-type and (B) Ph2C(OH)–C(OH)(Et)Ph-type react with H2SO4 (pinacol–pinacolone rearrangement). Products from the options (p)–(s) are ketones with Ph, CH3 or Et groups. (a) p, q, r, s (b) p, q (c) p, q, r (d) p, q, s.

Solution. (b) p, q (answer from key).

Teacher's Note: Cation forms at the carbon giving the better-stabilised (diaryl) cation, then a group migrates.

Exam Note: Migratory aptitude decides the ketone.

Question 70. Which of the following compounds gives an even number of Hoffmann exhaustive methylation and eliminations? (a) piperidine (b) decahydroquinoline (c) quinolizidine (d) N-methylethylamine type (CH3CH2NHCH3).

Solution. (a), (b) (answer from key). Piperidine needs 2 cycles and the fused decahydroquinoline 2 cycles, each an even number.

Teacher's Note: Number of cycles equals the number of C–N bonds that must be cleaved to free N, counted through rings.

Exam Note: Count rings through N.

Question 71. A polycyclic iodide (iodo compound with cyclobutyl, cyclopentyl and cyclohexyl substituents, stereocentres as drawn) with alc. KOH: X = number of chiral products (including stereoisomers). (a) 2 (b) 4 (c) 6 (d) 8.

Solution. (b) 4 (answer from key).

Teacher's Note: Count chiral alkenes including stereoisomers from each β-hydrogen set.

Exam Note: Include stereoisomers in the count.

Question 72. 4-Chlorocyclohex-2-enone-type compound (chloro ketone as drawn) with t-BuO⊖/t-BuOH gives (A): (a) t-butyl ether (b) phenoxide ion (c) cyclohexadienone (d) saturated chloro-ether.

Solution. (b) phenoxide ion. Elimination of HCl gives cyclohexa-2,5-dienone, which loses a proton from the base to give the aromatic phenoxide ion.

Teacher's Note: Dienone is quickly deprotonated to the aromatic phenoxide.

Exam Note: Aromatic phenoxide is the sink.

Question 73. A cyclohexenyl-substituted tertiary-alcohol side chain with conc. H2SO4 gives A + H2O (major). Product A: options (a)–(d) are bicyclic or open-chain alkenes.

Solution. (a) (answer from key): the carbocation is attacked by the ring double bond (cation–olefin cyclisation), a tertiary cation forms and gives a fused bicyclic (decalin-type) alkene with gem-dimethyl and methyl groups as drawn.

Teacher's Note: Cation–alkene cyclisation builds a six-membered ring.

Exam Note: Cation attacks the nearby alkene.

Level 2

Question 2.1. Comprehension: in an E2 reaction a strong base removes a β-proton as the leaving group departs, via an anti-coplanar (staggered) transition state (e.g. 2-bromobutane with CH3ONa/CH3OH gives mainly trans-2-butene, plus cis-2-butene and 1-butene). (A) Rate order of the four halocyclohexanes (iodo, bromo, chloro, fluoro) in E2: (a) a > b > c > d (b) a > c > b > d (c) b > a > c > d (d) b > d > a > c. (B) In pairs, which is more reactive: (P) cyclohexyl bromide with axial vs equatorial Br arrangement (I vs II); (Q) 2-bromopropane (III) vs its CD3-labelled analogue (IV). Options (a) P–II, Q–III, R–VI, S–VII (b) P–II, Q–III, R–VI, S–VI (c) P–I, Q–III, R–VI, S–VII (d) P–I, Q–II, R–V, S–VIII. (C) Fischer projections of the two diastereomeric bromides with alc. KOH: A and B are (a) cis, cis (b) A = trans, B = cis (c) trans, trans (d) A = cis, B = trans. (D) The two menthyl-type chlorides with NaOEt/Δ giving P or Q: (a) A = P, B = P (b) A = Q, B = Q (c) A = Q, B = P (d) A = P, B = Q. (E) Which compound is inert toward E2? (a) 3-bromopentane (b) bromocyclohexene-type vinyl/bridgehead bromide (c) neopentyl bromide (d) 2-bromo-3-methylbutane.

Solution. (A) (a); (B) (a); (C) (b); (D) (c); (E) (c). Answers from key. (A) Rate follows leaving-group ability I > Br > Cl > F. (C) Anti elimination from each diastereomer gives different alkene geometry. (E) Neopentyl bromide has no β-hydrogen, so it cannot undergo E2.

Teacher's Note: Combine leaving-group ability, anti-periplanar H and β-H presence to rank E2 reactivity.

Exam Note: Neopentyl halide has no β-H.

Question 2.2. Match the column. E2 reaction (alc. KOH/Δ) versus the number of possible products (including stereoisomers): (a) 2-bromopentane (b) 3-bromopentane (c) 1-bromopentane (d) neopentyl bromide, with (p) 0 (q) 1 (r) 2 (s) 3.

Solution. a–s; b–r; c–q; d–p (from key). (a) pent-1-ene, cis- and trans-pent-2-ene = 3; (b) cis- and trans-pent-2-ene = 2; (c) pent-1-ene only = 1; (d) neopentyl bromide has no β-H = 0.

Teacher's Note: Count the β-carbons and add cis/trans isomers for internal alkenes.

Exam Note: Include cis/trans in the count.

Question 2.3. Match the column. HEM = Hoffmann exhaustive methylation followed by elimination (two HEM cycles): (a) 4-methylpiperidine (b) 3-methylpiperidine (c) 2-methylpiperidine (d) piperidine; products (p) CH2=CH–CH2–CH=CH2 (q) CH2=CH–CH2–CH2–CH=CH2 (r) CH2=CH–CH2–C(CH3)=CH2 (s) CH2=CH–CH(CH3)–CH=CH2.

Solution. a–s; b–r; c–q; d–p (from key). Rebuilding the carbon chain through N: 4-methylpiperidine gives the 3-methylpenta-1,4-diene (s); 3-methylpiperidine gives 2-methylpenta-1,4-diene (r); 2-methylpiperidine gives hexa-1,5-diene (q) by Hofmann removal from the CH3; piperidine gives penta-1,4-diene (p).

Teacher's Note: Join the two ends of the diene through N to rebuild the ring.

Exam Note: Reconnect the diene ends through N.

Question 2.4. Match the column. (a) 2-butanol with H⊕/Δ (b) 2-bromobutane with alc. KOH/Δ (c) a tertiary-type alcohol (2-methyl-2-butanol type as drawn) with H⊕/Δ (d) bromoalkane (as drawn) with alc. KOH/Δ; with (p) products are diastereomers (q) carbocation is an intermediate (r) 2nd-order reaction (s) 1st-order reaction.

Solution. a–p, q, s; b–p, r; c–q, s; d–r (from key). Acid dehydration goes via a carbocation (first order); alc. KOH on a secondary bromide is E2 (second order); cis/trans-2-butene are diastereomers.

Teacher's Note: Acid dehydration is E1 (1st order); alc. KOH is E2 (2nd order).

Exam Note: E1 first order, E2 second order.

Question 2.5. Match the column. (a) 1,2,3-trichlorocyclohexane stereoisomer (as drawn) with alc. KOH (b) another stereoisomer with alc. KOH (c) chlorocyclohexane-type with aq. KOH (d) trans-1-chloro-4-methylcyclohexane with aq. KOH; with (p) optically active product (q) optically inactive product (r) 2nd-order reaction (s) unimolecular reaction.

Solution. a–p, r; b–p, r; c–p, r; d–q, r (from key). Alc. KOH gives bimolecular E2; the products are optically active or inactive depending on the symmetry of the product alkene/alcohol as marked.

Teacher's Note: E2 with strong base is second order; check the symmetry of the product for optical activity.

Exam Note: Symmetric product is optically inactive.

Question 2.6. Match the column. E2 reactions with alc. KOH, number of products (including stereoisomerism): (a) 1-bromobutane (b) 2-bromobutane (c) 2-bromo-2-methylbutane (d) PhCH2CH(Br)CH2CH3; with (p) 1 (q) 2 (r) 3 (s) 4.

Solution. a–p; b–r; c–q; d–s (from key). (a) but-1-ene only; (b) but-1-ene, cis- and trans-but-2-ene; (c) 2-methylbut-2-ene and 2-methylbut-1-ene; (d) cis/trans-1-phenylbut-1-ene and cis/trans-1-phenylbut-2-ene.

Teacher's Note: List each β-carbon alkene and count cis/trans forms.

Exam Note: Count stereoisomers too.

Question 2.7. Match the column. (a) 2-butanol, H+/Δ (b) 2-chlorobutane, NaNH2/Δ (c) CH3COCH2CH(Br)CH3 with EtONa/Δ (d) a 2-methylcyclohexyl dimethylamine oxide on heating; with (p) E1 (q) E2 (r) Ei (elimination intramolecular) (s) E1CB.

Solution. a–p; b–q; c–s; d–r (from key). Acid dehydration is E1; amide base on a halide is E2; the β-keto-activated halide with alkoxide goes by E1CB (acidic H next to C=O); amine-oxide pyrolysis is Ei.

Teacher's Note: Identify the mechanism from reagent: acid E1, strong base E2, carbonyl-activated H E1CB, amine oxide Ei.

Exam Note: Reagent decides the mechanism.

Question 2.8. Match the column. Amine-oxide pyrolysis (Ei, syn elimination) of four deuterium/methyl-labelled amine oxides on an indane skeleton (a)–(d) versus the products (p) alkene retaining D (q) alkene retaining H (r) alkene with CH3 (s) alkene with CD3.

Solution. a–p; b–q; c–r; d–s (from key). Ei removes only the syn hydrogen/deuterium; the label that is syn to the amine oxide is lost and the anti one stays.

Teacher's Note: Syn elimination: identify which of H/D is on the same face as the amine oxide.

Exam Note: Ei removes the syn H only.

Question 2.9. (a) 2-bromobutane, (b) 2-bromopentane, (c) 3-bromopentane, (d) a Fischer-projection bromide (CH3)2CH–type, each with alc. KOH giving X, Y, Z, P products. Sum X + Y + Z + P = ?

Solution. 8. X = 3 (but-1-ene, cis- and trans-but-2-ene), Y = 3, Z = 2, P = 0, so 3 + 3 + 2 + 0 = 8 (from key).

Teacher's Note: Count alkenes including cis/trans for each halide.

Exam Note: Add stereoisomers to each count.

Question 2.10. Reaction 1: PhCOCH3 with PCl5, then [x] NaNH2, then CH3I gives PhC≡C–CH3. Reaction 2: a vicinal dibromopentane/butane with [y] NaNH2 gives CH3C≡CCH3. Reaction 3: PhCH(Cl)CH2Cl with [z] NaNH2, then Et–I gives PhC≡C–Et. x, y, z are moles used. Sum x + y + z = ?

Solution. 8. x = 3, y = 2, z = 3, so 3 + 2 + 3 = 8 (from key). Two moles of NaNH2 give the alkyne by double dehydrohalogenation; where the terminal alkyne forms, a third mole deprotonates it for alkylation.

Teacher's Note: Count moles: two for double elimination, one extra to form the acetylide before alkylation.

Exam Note: Extra NaNH2 makes the acetylide.

Question 2.11. Sum of α-hydrogens in the major product of the reaction: Reaction 1 cyclohexylmethanol (A); Reaction 2 a decalin-type tertiary alcohol (B); Reaction 3 2-cyclohexylethanol (C); Reaction 4 2-cyclohexylpropan-2-ol-type (D), each with H+/Δ. Sum of α-hydrogens A + B + C + D = ?

Solution. 32 (answer from key).

Teacher's Note: Find the major (most substituted/rearranged) alkene and count allylic C–H.

Exam Note: Count allylic hydrogens only.

Question 2.12. Sum of α-hydrogens: Reaction 1 (CH3)3C–CH(OH)CH3-type alcohol with H+/Δ gives (A); Reaction 2 3-methylbutan-1-ol gives (B); Reaction 3 a 2,3-dimethylbutan-1-ol type gives (C). Sum of α-hydrogens A + B + C = ?

Solution. 33 (answer from key).

Teacher's Note: Take the rearranged, most stable alkene from each alcohol, then count α-H.

Exam Note: Rearrange before counting.

Question 2.13. Reaction 1: a decalol with H+/Δ (A, major); Reaction 2: 2,2-dimethylcyclohexanol (B, major); Reaction 3: a cyclopentyl isopropyl carbinol-type alcohol (C, major). Sum of α-hydrogens A + B + C = ?

Solution. 28 (answer from key).

Teacher's Note: Predict the Saytzeff/rearranged alkene and count its α-hydrogens.

Exam Note: Count after rearrangement.

Question 2.14. (a) CH3CH(OH)CH2CH3-type alcohol (x), (b) tert-butyl alcohol-type (y), (c) a secondary alcohol (z), (d) a hindered tertiary alcohol (p), each with H+/Δ. Total number of products including minor products and stereoisomers is?

Solution. 9. x = 3, y = 1, z = 3, p = 2, so the sum is 9 (from key).

Teacher's Note: Count each alkene including minor ones and cis/trans.

Exam Note: Count minor products too.

Question 2.15. Match the column. (a) R-2-chlorobutane + KSH/acetone (b) R-2-chlorobutane + EtONa/EtOH (c) 2-bromo-2-methylpropane + H2O (d) 2-butanol + H2SO4/Δ; with (p) SN1 (q) SN2 (r) E1 (s) E2.

Solution. (a)–(q), (b)–(s), (c)–(p), (d)–(r). A good nucleophile in acetone gives SN2; a strong base gives E2; a tertiary bromide in water gives SN1; acid dehydration of a secondary alcohol gives E1.

Teacher's Note: Match reagent type to mechanism: nucleophile SN2, strong base E2, ionising solvent SN1, acid E1.

Exam Note: Reagent and substrate decide mechanism.

Question 2.16. Match the column. (a) chlorocyclohexane + aq. KOH (b) chlorocyclohexane + alc. KOH (c) 1-chloro-1-methylcyclohexane + H2O (d) 1-methylcyclohexanol + H+/Δ; with (p) SN1 (q) SN2 (r) E1 (s) E2.

Solution. (a)–(q), (b)–(s), (c)–(p), (d)–(r) (from key). Aqueous KOH on a secondary halide is mostly substitution (SN2); alcoholic KOH is E2; the tertiary chloride in water ionises (SN1); the alcohol with acid dehydrates by E1.

Teacher's Note: Aqueous KOH substitutes, alcoholic KOH eliminates.

Exam Note: aq. substitutes, alc. eliminates.

Question 2.17. Select whether each reagent combination gives substitution or elimination as the major product: (a) 2-chloropropane + t-BuOK/H2O (b) tert-butyl alcohol + H2SO4/Δ (c) 2-chlorobutane + alc. KOH (d) 2-iodopropane + NaN3 (e) 1-chloro-1-methylcyclohexane + EtO–/Δ (f) tert-butyl chloride + H2O.

Solution. Substitution: (d), (f). Elimination: (a), (b), (c), (e) (from key). Bulky/strong base or heat favours elimination; the weakly basic azide nucleophile and neutral water on a tertiary chloride give substitution.

Teacher's Note: Bulky or strong base gives elimination; good non-basic nucleophile or water gives substitution.

Exam Note: Basicity versus nucleophilicity.

Question 2.18. Match the column (matrix). (a) 4-methylcyclohexanol + H+/Δ (b) a methyl-substituted decalol (angular CH3, OH on a ring carbon) + H+/Δ (c) bicyclic alcohol (bridgehead-type decalol) + H+/Δ (d) a bridgehead alcohol (norbornanol type) + H+/Δ; with (p) racemic mixture (q) major product consists of even number of α-hydrogen (r) will not undergo dehydration (s) major product consists of odd number of α-hydrogen.

Solution. a–p, q; b–p, q; c–q; d–r (from key).

Teacher's Note: Check chirality of the alkene, count α-H, and test whether Bredt's rule blocks elimination.

Exam Note: Bridgehead alkene violates Bredt's rule.

Question 2.19. For each amine (A through F) exhaustive methylation (excess CH3I, then Hoffmann elimination with AgOH, repeated as necessary) removes the nitrogen as trimethylamine. Give the number of repeated Hoffmann eliminations (1 to 4) required: a = a pyrrolizidine-type bicyclic amine (A), b = a spiro-piperidine N–H (B), c = a bridged quinuclidine-type amine (C), d = a primary amine on a norbornyl-type frame (D), e = a benzo-fused azepine N–H (E), f = an indolizidine-type benzo-fused amine (F).

Solution. a–3; b–2; c–3; d–1; e–2; f–3 (from key). The number of cycles equals the number of C–N bonds to N: tertiary amines in bicyclic systems need three, secondary amines two, primary one.

Teacher's Note: Count the carbon substituents on N: that equals the number of HEM cycles needed.

Exam Note: Cycles equal C–N bonds.

Question 2.20. Quinolizidine (two fused six-membered rings sharing N) x is the total number of HEM (Hoffmann exhaustive methylation and eliminations) needed to remove nitrogen. Then 2-bromobutane with alc. KOH: y is the total number of possible E2 products (including stereoisomers). Sum x + y = ?

Solution. 6. x = 3 (three C–N bonds), y = 3 (but-1-ene, cis-but-2-ene, trans-but-2-ene), so x + y = 6 (from key).

Teacher's Note: N has three C–N bonds, so three HEM cycles; then count alkenes with stereoisomers.

Exam Note: Three C–N bonds, three cycles.

Question 2.21. (CH3)2CH–CH(Br)–CH3 (3-bromo-2-methylbutane) in EtOH gives (x) products by SN1 + E1 (including stereoisomers). Considering all products, the total number of products is?

Solution. 6. Hydride shift gives a tertiary cation. SN1 products: 2-ethoxy-3-methylbutane (two enantiomers) and 2-ethoxy-2-methylbutane = 3. E1 products: 2-methylbut-2-ene, 2-methylbut-1-ene and 3-methylbut-1-ene = 3. Total 6, as in the key.

Teacher's Note: Include products from both the unrearranged and rearranged cations, plus enantiomers.

Exam Note: Count both cation pathways.

Step-by-Step MS Chauhan Solutions for JEE Math

Download MS Chauhan Solutions for JEE

Access the complete chapter-wise PDF for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 b Alkyl Halides. These structured MS Chauhan Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Concept-Driven Math Answers

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these MS Chauhan Solutions for JEE Chemistry?

They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the MS Chauhan JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these MS Chauhan solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising MS Chauhan JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.