MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 c Alkyl Halides

Official MS Chauhan Textbook Solutions: JEE Chemistry Chapter 05 c Alkyl Halides

Review structured textbook solutions for JEE Chemistry Chapter 05 c Alkyl Halides prepared by MS Chauhan. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Chemistry: Chapter 05 c Alkyl Halides

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

MS Chauhan Advanced Problems in Organic Chemistry – Chapter 5c Alkyl Halides (Level 1, Level 2, Subjective Problems)

Level 1

Question 1. 1,3-Dibromo-1,2,3,4-tetrahydronaphthalene (both Br wedged, cis) is treated with (1) one equivalent NaCN, (2) LiAlH4 to give (A). Product (A) is:
(a) Br at C1 (wedge) kept; CH2NH2 at C3 hashed
(b) Br at C1 (wedge) kept; CH2NH2 at C3 wedged
(c) CH2NH2 at C1 hashed; Br at C3 wedged
(d) CH2NH2 at C1 hashed; Br at C3 hashed

Solution. Answer (from key): (c). The benzylic C1–Br reacts first; CN− displaces it with inversion (wedge to hash), C3–Br is untouched, and LiAlH4 reduces −CN to −CH2NH2.

Teacher's Note: Benzylic halide reacts first; SN2 inverts only that centre; nitrile reduces to amine.

Exam Note: Track inversion at one carbon only.

Question 2. In the reactions R–Cl → (i) KCN, (ii) LiAlH4 gives Product A, and R–Cl → (i) AgCN, (ii) LiAlH4 gives Product B. The compounds A and B are:
(a) chain isomers
(b) position isomers
(c) functional isomers
(d) metamers

Solution. Answer (from key): (c). KCN gives R–CN, reduced to RCH2NH2 (primary amine); AgCN (covalent) gives R–NC, reduced to R–NHCH3 (secondary amine). Same formula, different functional groups.

Teacher's Note: KCN attacks through carbon, AgCN through nitrogen; products are primary and secondary amines.

Exam Note: Ionic cyanide gives nitrile, covalent gives isonitrile.

Question 3. Which is the major product expected from the following SN2 reaction? A chloro compound that also carries an ethoxy group (zigzag drawing with two stereocentres) reacts with NaOH.
(a) OH and OEt both present (stereochemistry as drawn in (a))
(b) OH and OEt both present (the other relative stereochemistry, as drawn in (b))
(c) Cl retained, OH in place of OEt
(d) both groups replaced by OH

Solution. Answer (from key): (b). OH− displaces only the chloride, with inversion at that carbon; the ether C–OEt is not cleaved by NaOH. (The two stereo-drawings in (a) and (b) are described only in words.)

Teacher's Note: Alkoxy is a poor leaving group; only C–Cl is substituted, with inversion.

Exam Note: State inversion at the C–Cl carbon.

Question 4. Consider the following E1/SN1 reaction: 1-bromo-1,4-dimethylcyclohexane (Br hashed) in H2O/ethanol, heat, gives a tertiary alcohol (OH hashed) + the endocyclic alkene 1,4-dimethylcyclohexene. The missing product(s) is/are:
(1) the epimeric tertiary alcohol (OH wedged)
(2) the other enantiomer of the alkene 1,4-dimethylcyclohexene (C4 inverted)
(3) the exocyclic alkene (4-methyl-1-methylenecyclohexane)
(4) an alkene with the double bond at the C2–C3 position
(a) 1, 2 and 3   (b) 3 and 4   (c) 2 and 3   (d) 1, 2, 3 and 4

Solution. Answer (from key): (a). The planar tertiary cation is captured from both faces (so the epimeric alcohol (1) is also formed); loss of H+ gives the endocyclic alkene as two forms (2) and the exocyclic alkene (3). (4) is not formed.

Teacher's Note: Planar carbocation: both faces attacked; Zaitsev and Hofmann alkenes both form.

Exam Note: Count stereoisomers from the planar cation.

Question 5. What is the product of the following SN2 reaction? Methyl 2-methyl-3-phenyl-3-(tosyloxy)propanoate (OTs at the benzylic carbon, wedge drawing) reacts with NaBr. Options are Fischer projections of methyl 3-bromo-2-methyl-3-phenylpropanoate (CO2Me top, Ph bottom):
(a) CH3 left, H right; Br left, H right
(b) CH3 left, H right; H left, Br right
(c) H left, CH3 right; Br left, H right
(d) H left, CH3 right; H left, Br right

Solution. Answer (from key): (a). Br− attacks the benzylic carbon from the side opposite OTs (inversion there); the methyl-bearing carbon keeps its configuration.

Teacher's Note: SN2 inverts only the carbon bearing the leaving group.

Exam Note: Convert wedge drawing to Fischer carefully.

Question 6. Select the reagent that will yield the greater amount of substitution on reaction with CH3–CH2–Br:
(a) CH3CH2OK in dimethyl sulfoxide (DMSO)
(b) (CH3)3COK in DMSO
(c) Both (a) and (b) will give comparable amounts of substitution
(d) Neither (a) nor (b) will give any amount of substitution

Solution. Answer (from key): (a). Small ethoxide is a good nucleophile, so SN2 predominates; bulky tert-butoxide acts mainly as a base (E2).

Teacher's Note: Bulky base favours elimination; small alkoxide favours SN2.

Exam Note: Bulk of base decides SN2 vs E2.

Question 7. Under the specified conditions, substrate X undergoes substitution and elimination to give products A–D (X, H2O, heat). A and B are stereoisomers but not enantiomers; C and D are enantiomers; A is not an isomer of C. Which could be the starting material X? (I) a secondary bromo-methylcyclopentane; (II) a 1-bromo-dimethylcyclohexane; (III) the stereoisomeric 1-bromo-1,4-dimethylcyclohexane; (IV) an acyclic bromide (all drawn with wedges/hashes).
(a) (I)
(b) (II)
(c) (III)
(d) (IV)

Solution. Answer (from key): (c) (III). The tertiary cation gives two diastereomeric alcohols (A, B) and an enantiomeric pair of alkenes (C, D); alcohol and alkene are not isomers. (Structures described in words only.)

Teacher's Note: SN1/E1 via planar cation: diastereomeric alcohols plus enantiomeric alkenes.

Exam Note: Match product relationships to one substrate.

Question 8. Compare the rate of E2 reaction: (a) (CH3)3C–Br, (b) (CH3)2CH–Br, (c) CH3CH2–Br
(a) c > b > a
(b) a > b > c
(c) b > a > c
(d) c > a > b

Solution. Answer (from key): (b), a > b > c. E2 rate rises with more substituted alkene and more β-hydrogens: tertiary > secondary > primary.

Teacher's Note: E2 rate order: 3° > 2° > 1° halides.

Exam Note: E2 order is opposite to SN2.

Question 9. Which reaction results in the formation of a pair of enantiomers? (a) a chiral secondary iodide + CN−/DMSO; (b) a chiral secondary iodide + H2O; (c) a methylcyclohexyl iodide + OH−/DMF; (d) a chiral secondary iodide + CH3OH (structures drawn).

Solution. Answer (from key): (b). Hydrolysis in water proceeds by SN1: the planar carbocation is captured from both faces, giving a racemic pair of enantiomers. CN−/DMSO and OH−/DMF are SN2 (single inverted product).

Teacher's Note: SN1 via planar cation gives racemate; SN2 gives one inverted product.

Exam Note: Weak nucleophile, protic solvent: racemisation.

Question 10. Rate-limiting SN1 follows the sequence R–Br ⇌ [R⊕Br⊖] (a) ⇌ [R⊕ || Br⊖] (b) ⇌ R⊕ + Br⊖ (c). True statement about the sequence, assuming R contains 3 different groups, is:
(a) the more stable the carbocation, the greater the proportion of racemization
(b) the more nucleophilic the solvent, the greater the proportion of inversion
(c) in the above sequence (b) represents a separately solvated pair of ions
(d) All of these

Solution. Answer (from key): (d). A more stable cation lives longer and is attacked from both sides (more racemization); a more nucleophilic solvent attacks the ion pair from the back (more inversion); (b) is the solvent-separated ion pair.

Teacher's Note: Ion-pair picture explains partial racemisation with excess inversion.

Exam Note: Know intimate vs solvent-separated ion pairs.

Question 11. Compare two methods for preparing carboxylic acids. Method 1: RBr → (Mg, diethyl ether) RMgBr → (1. CO2; 2. H3O+) RCO2H. Method 2: RBr → (NaCN) RCN → (H2O, HCl, heat) RCO2H. Which statement correctly describes the conversion of a tricyclic bromide (Br at a ring-fusion carbon of a perhydrophenalene) into the corresponding CO2H compound?
(a) Both method 1 and method 2 are appropriate
(b) Neither method 1 nor method 2 is appropriate
(c) Method 1 will work well, but method 2 is not appropriate
(d) Method 2 will work well, but method 1 is not appropriate

Solution. Answer (from key): (c). The tertiary bromide forms a Grignard reagent readily, which adds to CO2. With NaCN the hindered tertiary halide cannot undergo SN2, so method 2 fails.

Teacher's Note: Tertiary bromide: Grignard works, SN2 with cyanide fails.

Exam Note: Hindered halides rule out SN2 routes.

Question 12. Which of the following statements is true?
(a) CH3CH2S− is both a stronger base and more nucleophilic than CH3CH2O−
(b) CH3CH2S− is a stronger base but is less nucleophilic than CH3CH2O−
(c) CH3CH2S− is a weaker base but is more nucleophilic than CH3CH2O−
(d) CH3CH2S− is both a weaker base and less nucleophilic than CH3CH2O−

Solution. Answer (from key): (c). Thiols are more acidic than alcohols, so RS− is the weaker base; the larger, more polarizable sulfur is the better nucleophile.

Teacher's Note: Basicity follows conjugate-acid pKa; nucleophilicity follows polarizability down a group.

Exam Note: Weaker base need not mean weaker nucleophile.

Question 13. In the given pair of alcohols, in which pair is the second alcohol more reactive than the first towards hydrogen bromide?
(a) 1-methylcyclopentanol and cyclohexanol
(b) 1-ethylcyclopentanol and 1-cyclobutyl-ethanol-type secondary alcohol
(c) CH3–CH(OH)–CH2–CH3 and CH3–CH2–CH(CH3)–CH2–OH
(d) CH3–CH(OH)–CH2–CH3 and (CH3)2C(OH)–CH2–CH3

Solution. Answer (from key): (d). In (d) the second alcohol is tertiary and forms the more stable carbocation, so it reacts faster with HBr (SN1).

Teacher's Note: Reactivity with HBr follows carbocation stability: 3° > 2° > 1°.

Exam Note: Compare the cation each alcohol gives.

Question 14. Which product would be expected to predominate in the given reaction? The benzylic secondary triflate PhCH(OSO2CF3)CH2CH3 (wedged) in CH3OH, 30°C.
(a) the methyl ether PhCH(OCH3)CH2CH3
(b) the alkene PhCH=CHCH3
(c) the mesylate PhCH(OSO2CH3)CH2CH3
(d) None of these

Solution. Answer (from key): (a). Triflate is an excellent leaving group; in methanol (polar protic, weakly basic) at low temperature the benzylic cation is trapped by CH3OH (SN1 solvolysis) to give the ether; elimination needs heat or strong base.

Teacher's Note: Benzylic cation plus nucleophilic solvent at low temperature: substitution.

Exam Note: Heat favours E1; 30°C favours substitution.

Question 15. Which is the major product of the following reaction? 2-(Bromomethyl)benzonitrile with excess NaOH, H2O, heat.
(a) 2-(bromomethyl)benzoic acid
(b) 2-(hydroxymethyl)benzonitrile
(c) 2-(hydroxymethyl)benzoic acid
(d) 4-hydroxy-2-(hydroxymethyl)benzonitrile

Solution. Answer (from key): (c). The benzylic bromide is hydrolysed to −CH2OH and the nitrile is hydrolysed by excess hot aqueous NaOH to the carboxylic acid (as its salt, acid on work-up).

Teacher's Note: Excess hot NaOH hydrolyses both benzylic halide and nitrile.

Exam Note: Check every functional group for hydrolysis.

Question 16. Alc. KOH acts on a substituted bromocyclohexane (CH3, H, D and Br with defined wedges/hashes) to give (A). Major product is: (a) an alkene retaining D, double bond toward the methyl-bearing carbon; (b) the alcohol (substitution); (c) 3-methylcyclohexene-type alkene (D lost); (d) an alkene retaining D, other position.

Solution. Answer (from key): (c). Alc. KOH brings about E2, which needs the β-hydrogen (or deuterium) anti-periplanar (both axial) to Br; the printed key gives option (c). (The stereo-drawing could not be fully resolved; check against the book figure.)

Teacher's Note: E2 needs anti-periplanar axial H and Br; analyse the chair.

Exam Note: Draw the chair; only axial anti H is lost.

Question 17. Rate of SN2 reaction is: (A) tert-butyl bromide, (B) a bridgehead bromonorbornane, (C) a 2-bromonorbornane (structures drawn).
(a) (B) > (A) > (C)
(b) (C) > (A) > (B)
(c) (A) > (B) > (C)
(d) (A) > (C) > (B)

Solution. Answer (from key): (c) (A) > (B) > (C). (Printed key answer; the drawn structures are ambiguous in the scan, so this item needs a human check.)

Teacher's Note: Back-side attack is hindered in tertiary and bridged halides.

Exam Note: Compare steric access to back-side attack.

Question 18. 1,2-Dichloroethane + NaSCH2CH2SNa → C4H8S2 + (P). Unknown product (P) of the above reaction is:
(a) a saturated six-membered ring containing two S atoms
(b) a ring with two S atoms and a C=C
(c) HS–CH=CH–CH=CH–SH (as drawn)
(d) an acyclic compound with C=C and S–H (as drawn)

Solution. Answer (from key): (a). Two successive SN2 steps (the second intramolecular) give 1,4-dithiane, C4H8S2, saturated six-membered ring with two S atoms; the other product is NaCl. (Options drawn as rings/chains; (a) is the saturated dithiane ring.)

Teacher's Note: Double SN2 with a dithiolate closes a six-membered ring.

Exam Note: Match formula C4H8S2 to the saturated ring.

Question 19. (1-Bromoethyl)cyclopentane (Br on the carbon next to the ring), moist Ag2O gives (A). Major product (A) is: (a) 1-cyclopentylethanol; (b) a side-chain alcohol on a methylcyclopentane; (c) 1-methylcyclohexanol; (d) 2-methylcyclohexanol (structures drawn).

Solution. Answer (from key): (c). Ag+ removes Br− to give a secondary cation that undergoes ring expansion (cyclopentyl to cyclohexyl) to a tertiary cation; water then gives 1-methylcyclohexanol.

Teacher's Note: Ring expansion turns the 2° cation into a 3° cyclohexyl cation.

Exam Note: Look for rearrangement whenever a carbocation forms.

Question 20. MeO–CH2–Cl (MOM chloride, methoxymethyl chloride) + KCN. Product of reaction is:
(a) Cl–CH2–CH2–CN-type chloro nitrile (Cl and CN both present)
(b) MeO–CH2–CN
(c) Me–O–CH2–CH2–CN
(d) a cyclic dinitrile

Solution. Answer (from key): (b). MOM chloride is an α-chloro ether (very reactive; oxygen lone pair stabilises the cation); CN− simply replaces Cl to give MeOCH2CN.

Teacher's Note: Alpha-chloro ether is very reactive; simple Cl by CN substitution.

Exam Note: One-step substitution; no extra carbons.

Question 21. In the given pair of compounds, in which pair is the second compound more reactive than the first towards SN2 reaction? (a) a primary chloride vs a secondary chloride; (b) cyclohexylmethyl chloride vs cyclohexyl chloride; (c) a primary bromide vs a branched bromide; (d) a hindered chloride vs a less hindered chloride (structures drawn).

Solution. Answer (from key): (d). The second compound of pair (d) is less hindered at the C–Cl carbon, so back-side attack is easier. (Pairs were drawn as skeletal structures; read from the scan with limited resolution.)

Teacher's Note: SN2 rate falls as steric hindrance at the reacting carbon rises.

Exam Note: Compare crowding at the C–X carbon.

Question 22. Which compound might be synthesized by the SN2 displacement of an alkyl halide?
(a) cyclohexyl–CH2–OH
(b) a cycloalkyl ethyl sulfide (ring–SCH2CH3)
(c) Me3C–OCH3
(d) All of these

Solution. Answer (from key): (d). (a) from cyclohexyl–CH2Br + OH−; (b) from ring bromide + CH3CH2S− (or CH3CH2Br + ring–S−); (c) from CH3I + Me3CO− (Williamson, methyl halide as the electrophile).

Teacher's Note: Choose the less hindered halide partner for SN2.

Exam Note: Tertiary alkoxide plus methyl halide works.

Question 23. Identify C in the following series: C3H7I → (alc. KOH) A → (NBS, Δ) B → (alc. KCN) C.
(a) (CH3)2CH–CN
(b) CH2=CH–CH2–CN
(c) Br–CH=CH–CN
(d) CH2=CH–CH(CN)Br

Solution. Answer (from key): (b). C3H7I gives propene (A); NBS brominates the allylic position to give CH2=CH–CH2Br (B); KCN gives CH2=CH–CH2CN (C).

Teacher's Note: NBS brominates the allylic position; cyanide then substitutes it.

Exam Note: NBS means allylic bromination, not addition.

Question 24. What sequence of reagents is required to accomplish the following transformation (an isobutyl-type alkane to a primary alcohol, OH at the terminal carbon)?
(a) (1) NBS, ROOR (2) CH3CH2O− (3) 2HBr (4) NH2− (5) disiamylborane (6) H2O2, OH−
(b) (1) Cl2, hν (2) OH−, heat; (3) 2HCl (4) OH−, heat (5) HgSO4, H2SO4
(c) (1) NBS, ROOR; OH−, DMSO
(d) (1) Br2, hν (2) t-butoxide (3) BH3, THF (4) H2O2, OH−

Solution. Answer (from key): (d). Radical bromination puts Br at the most substituted carbon; bulky t-butoxide gives the Hofmann (less substituted) alkene by E2; hydroboration–oxidation then gives the anti-Markovnikov alcohol.

Teacher's Note: Bulky base gives terminal alkene; hydroboration puts OH at the terminal carbon.

Exam Note: Combine Hofmann elimination with anti-Markovnikov hydration.

Question 25. Which of the reagents shown below would accomplish the transformation of the alkyl bromide to the alcohol (1. A, then 2. B)?
(a) A = H3O+; B = BH3–THF; H2O2/NaOH
(b) A = NaOH; B = BH3–THF; H2O2/NaOH
(c) A = HBr in ether; B = Hg(OAc)2/H2O; NaBH4
(d) A = NaNH2; B = Hg(OAc)2/H2O; NaBH4

Solution. Answer (from key): (d). NaNH2 eliminates HBr to give the alkene; oxymercuration–demercuration then adds water in Markovnikov fashion without rearrangement.

Teacher's Note: Eliminate first, then oxymercuration gives Markovnikov alcohol.

Exam Note: Strong base for E2, then Markovnikov hydration.

Question 26. What are the products obtained from the following reaction? A secondary bromide on the saturated ring of tetralin (2-bromotetralin type) + HC≡CNa in Et2O.
(a) substitution product (20%) + an alkene (80%) (as drawn)
(b) substitution product (20%) + the alkene 1,2-dihydronaphthalene-type (80%) (as drawn)
(c) substitution product (100%)
(d) substitution product with the alkyne on the ring junction (100%)

Solution. Answer (from key): (b). The acetylide ion is a strong base; with a secondary halide E2 dominates and gives the conjugated alkene as the major product, with a minor SN2 alkyne product.

Teacher's Note: Acetylide is a strong base; secondary halide gives mostly E2.

Exam Note: Secondary halide with strong base: elimination major.

Question 27. The back-side attack on 2-bromobutane by methoxide (CH3O−) gives the product shown (2-methoxybutane with OCH3 up, Et hashed, Me, H). Which Fischer projection represents 2-bromobutane used as the reactant?
(a) Et top, Me left, H right, Br bottom
(b) Et top, H left, Br right, Me bottom
(c) Me top, Br left, H right, Et bottom
(d) Br top, Me left, H right, Et bottom

Solution. Answer (from key): (d). Back-side SN2 inverts configuration, so the reactant is the mirror-configured bromide with Br where OCH3 was.

Teacher's Note: SN2 inverts configuration: reverse the descriptor to get reactant.

Exam Note: Assign R/S, then invert for the reactant.

Question 28. Consider the following statements: (1) Bridgehead halides are inert towards both SN1 and SN2 reactions (till one of the ring size is eight-member ring). (2) The first step in both SN1 and E1 reactions is the same. (3) SN2 reactions proceed with total retention of configuration. (4) E2 eliminations are favoured by the use of a solvent of low polarity and high concentration of a strong base. Which of the above statements are correct?
(a) 1, 2 and 4
(b) 1 and 3
(c) 2, 3 and 4
(d) 1, 2, 3 and 4

Solution. Answer (from key): (a). (1), (2) and (4) are correct; (3) is wrong because SN2 proceeds with inversion (Walden inversion), not retention.

Teacher's Note: SN2 means inversion; SN1 and E1 share the ionisation step.

Exam Note: Retention statement is the usual trap.

Question 29. Consider the following alcohols: (I) benzyl alcohol, (II) 4-nitrobenzyl alcohol, (III) 4-methoxybenzyl alcohol, (IV) 4-bromobenzyl alcohol. The order of decreasing reactivities of these alcohols towards substitution with HBr is:
(a) III > I > IV > II
(b) III > I > II > IV
(c) I > III > IV > II
(d) I > III > II > IV

Solution. Answer (from key): (a), III > I > IV > II. Reaction proceeds through the benzylic cation (SN1): −OCH3 stabilises it by resonance, −Br destabilises mildly (−I), −NO2 destabilises it most.

Teacher's Note: Electron donors stabilise the benzylic cation; NO2 destabilises it most.

Exam Note: Rank by cation stability.

Question 30. In solvolysis of 1,2-dimethylpropyl p-toluenesulfonate in acetic acid at 75°C, how many (alkene + substitution) products will be formed?
(a) 2
(b) 3
(c) 4
(d) 5

Solution. Answer (from key): (d) 5. The secondary cation gives 3-methylbut-1-ene and 2-methylbut-2-ene; a hydride shift gives the tertiary cation, which gives 2-methylbut-2-ene and 2-methylbut-1-ene; acetates of the secondary and tertiary alcohols (3-methylbutan-2-yl acetate and 2-methylbutan-2-yl acetate) account for the total of 5 distinct products.

Teacher's Note: Secondary cation rearranges to tertiary; count alkenes and acetates from both.

Exam Note: Include rearranged-cation products.

Question 31. Benzotrichloride reacts with milk of lime to form:
(a) Benzal
(b) Benzoic acid
(c) Benzyl alcohol
(d) Phenol

Solution. Answer (from key): (b). C6H5CCl3 is hydrolysed to the unstable C6H5C(OH)3, which loses water to give benzoic acid (as calcium benzoate; acid on work-up).

Teacher's Note: Three Cl on one carbon: hydrolysis gives a carboxylic acid.

Exam Note: CCl3 group hydrolyses to COOH.

Question 32. Br–CH2–(CH2)2–CH2–Br + CH3NH2 → Product of the reaction is: (a) pyrrolidine (N–H); (b) N-methylpyrrolidine; (c) a 2-substituted pyrrolidine; (d) a C-methyl N–H ring (structures drawn).

Solution. Answer (from key): (b). The amine displaces one Br; the resulting secondary amine attacks the other C–Br intramolecularly, forming the five-membered ring N-methylpyrrolidine.

Teacher's Note: Intramolecular second SN2 forms a favourable five-membered ring.

Exam Note: Ring closure gives N-methyl, not N–H.

Question 33. The configurations of the reactant and the product in the following reaction, respectively, are: CH3O2C–CHBr–D (Fischer projection: CO2CH3 top, D left, Br right, H bottom) with KCN in EtOH gives CH3O2C–CH(CN)–D.
(a) R, R
(b) R, S
(c) S, R
(d) S, S

Solution. Answer (from key): (d) S, S. Reactant priorities Br > CO2CH3 > D > H give S (H on the vertical, so the sense read from the projection is true). SN2 inverts the geometry, but in the product the priority order changes (CO2CH3 > CN > D > H), so the label is again S.

Teacher's Note: Inversion of geometry does not always flip the R/S label.

Exam Note: Re-rank CIP priorities in the product.

Question 34. 1,4-Dichlorohexane (1 mole) + NaI (1 mole) in acetone → Product of the reaction is:
(a) Cl–CH2–CH2–CH(I)–CH2–CH3 (I at the secondary carbon)
(b) I–CH2–CH2–CH(Cl)–CH2–CH3 (chain as drawn)
(c) H2C=CH–CH(Cl)–CH2–CH3
(d) I–CH2–CH2–CH2–CH(Cl)–CH2–CH3 (as drawn)

Solution. Answer (from key): (d). In acetone (Finkelstein, SN2) the less hindered primary chloride is replaced by iodide; the secondary chloride reacts much more slowly, so with 1 mole NaI the product keeps the secondary Cl. (Option formulas read from the scan; (d) is the key answer.)

Teacher's Note: Finkelstein SN2: primary C–Cl reacts, secondary C–Cl survives with 1 mol NaI.

Exam Note: Equivalents decide mono- versus di-substitution.

Question 35. Alkyl halides can be obtained by all methods except:
(a) CH3CH2OH + HCl/ZnCl2 →
(b) CH3–CH2–CH2–CH3 + Cl2/UV light →
(c) C2H5OH + NaCl →
(d) CH3COOAg + Br2/CCl4 →

Solution. Answer (from key): (c). OH− is a very poor leaving group and NaCl is not acidic, so ethanol does not react with NaCl. (a) is Lucas-type, (b) free-radical chlorination, (d) Hunsdiecker reaction.

Teacher's Note: Alcohol needs acid, PX3 or SOCl2; NaCl alone does nothing.

Exam Note: Know Hunsdiecker, Lucas and radical halogenation.

Question 36. In order to prepare 1-chloropropane, which of the following reactants can be employed?
(a) Propene and HCl in the presence of peroxide
(b) Propene and Cl2 followed by treatment with aq. KOH
(c) Propanol-1 and SOCl2/pyridine
(d) Any of the above can be used

Solution. Answer (from key): (c). SOCl2/pyridine converts propan-1-ol cleanly to 1-chloropropane. The peroxide effect works only with HBr, so (a) gives 2-chloropropane; (b) does not give 1-chloropropane.

Teacher's Note: Peroxide effect works only with HBr; SOCl2 gives clean primary chloride.

Exam Note: Peroxide effect is limited to HBr.

Question 37. Which alkyl halide has maximum density?
(a) C3H7I
(b) C2H5I
(c) CH3I
(d) CH3Br

Solution. Corrected: (c) CH3I. The printed key gives (a), but the iodine mass fraction is highest in CH3I, and densities are CH3I 2.28, C2H5I 1.94, C3H7I about 1.74, CH3Br about 1.68 g/cm3.

Teacher's Note: Density of halides rises with heavy-halogen mass fraction; iodides densest, smallest alkyl highest.

Exam Note: Fewer carbons means higher density within iodides.

Question 38. Which of the following molecules would have a carbon–halogen bond most susceptible to nucleophilic substitution?
(a) 2-fluorobutane
(b) 2-chlorobutane
(c) 2-bromobutane
(d) 2-iodobutane

Solution. Answer (from key): (d). Iodide is the best leaving group (weakest C–X bond, most stable anion), so 2-iodobutane is the most reactive.

Teacher's Note: Leaving-group ability I > Br > Cl > F follows C–X bond strength.

Exam Note: Weakest C–X bond reacts fastest.

Question 39. When benzyl chloride is treated with ethanolic KCN, the major product formed is:
(a) benzyl ethyl ether
(b) benzyl alcohol
(c) benzyl cyanide
(d) benzyl isocyanide

Solution. Answer (from key): (c). KCN is ionic and attacks through carbon in an SN2 reaction giving C6H5CH2CN.

Teacher's Note: Ionic KCN gives nitrile (C-attack); AgCN would give isonitrile.

Exam Note: Cyanide attacks through carbon in ethanol.

Question 40. Which of the following is most reactive towards nucleophilic substitution reaction?
(a) CH2=CH–Cl
(b) C6H5Cl
(c) CH3CH=CHCl
(d) ClCH2–CH=CH2

Solution. Answer (from key): (d). Allyl chloride gives a resonance-stabilised allylic cation/transition state, whereas vinyl and aryl chlorides have partial double-bond character in C–Cl.

Teacher's Note: Allylic halide is reactive; vinyl and aryl halides are inert.

Exam Note: Vinyl/aryl C–Cl has double-bond character.

Question 41. Which of the following reactions will not give ether as a major product?
(a) CH3CH2Cl + Ag2O (dry) →
(b) (CH3)3CCl + CH3CH2O−Na+ →
(c) CH3CH2Cl + Na+O−–C6H5 →
(d) CH3Cl + Na+O−–C(CH3)3 →

Solution. Answer (from key): (b). tert-Butyl chloride with a strong base/nucleophile gives E2 elimination (isobutene), not the ether; the others are Williamson-type or Ag2O ether syntheses with primary or methyl halides.

Teacher's Note: Williamson needs a primary halide; tertiary halide eliminates.

Exam Note: Tertiary halide plus alkoxide gives alkene.

Question 42. Sulfite ion (O−–S(=O)–O−, an ambident nucleophile) reacts with H+ to give (A) and with CH3–I to give (B). Products (A) and (B) are:
(a) O−–S(=O)–O–H and O−–S(=O)–O–CH3
(b) O−–S(=O)–O–H and the S-methyl sulfonate (as drawn)
(c) O−–S(=O)–O–CH3 and an S–H species (as drawn)
(d) S-protonated and S-methylated forms (as drawn)

Solution. Answer (from key): (b). H+ (hard acid) bonds to oxygen; the soft CH3I is attacked by sulfur (SN2), giving the sulfonate CH3SO3−. (Option structures read from the scan; (b) is the key answer.)

Teacher's Note: Hard H+ binds oxygen; soft alkyl halide binds sulfur (HSAB).

Exam Note: Ambident ion: match hard/soft acid with site.

Level 2

Question Level 2, Q1. The organic halide derivatives A to J are reacted in ethanol with each of the nucleophiles: acetate, methylthiolate, cyanide and hydroxide. Compounds: A allylic secondary chloride (3-chlorocyclohexene), B benzyl chloride, C CH3–I, D vinylic chloride, E aryl chloride, F hindered secondary bromide, G hindered tertiary chloride, H secondary bromide on a bicyclic ring, I primary bromide (bromomethyl on a cyclopentane), J secondary bromide on a cyclopentane. Outcomes: (1) No reaction, (2) Substitution, (3) Elimination, (4) Substitution and elimination, (5) No reaction or slow substitution, (6) No reaction or slow elimination. Give the outcome for each combination (i) CH3CO2Na, (ii) CH3SNa, (iii) NaCN, (iv) NaOH.

Solution.
ReagentABCDEFGHIJ
(i) CH3CO2Na2221116226
(ii) CH3SNa2221156226
(iii) NaCN2221113323
(iv) NaOH4221153343

Answer (from key), transcribed as printed.

Teacher's Note: Vinyl and aryl halides do not react; primary and allylic halides substitute; hindered halides eliminate or are slow.

Exam Note: Classify each halide first, then each nucleophile.

Question Level 2, Q2. In each section three organic halogen compounds are listed; give the order of reactivity (1 = most reactive, 3 = least). (a) SN2 by NaOCOCH3 in methanol: 1. CH3CH2CH2Br, 2. (CH3)2CHBr, 3. CH2=CHCH2Br. (b) SN2 by NaI in acetone: 1. C6H5Cl, 2. C6H5CH2Cl, 3. C6H5CHClCH3. (c) SN2 by NaCN in methanol: 1. CH3CH2Cl, 2. CH3CH2F, 3. CH3CH2I. (d) SN2 by NaSCH3 in methanol: 1. (CH3)2CHCH2CH2Br, 2. CH3CH2CHBrCH2CH3, 3. (CH3)3CCH2Br.

Solution. Answer (from key), listing compound numbers from most to least reactive: (a) 3 > 1 > 2 (allyl, primary, secondary); (b) 2 > 3 > 1 (benzyl chloride, secondary benzylic, aryl chloride unreactive); (c) 3 > 1 > 2 (I > Cl > F); (d) 1 > 2 > 3 (unhindered primary, secondary, neopentyl).

Teacher's Note: Rank by leaving-group ability and steric hindrance; allylic and benzylic are activated.

Exam Note: Neopentyl and aryl halides are slowest.

Question Level 2, Q3. Isobutyl alcohol (2-methyl-1-propanol), (CH3)2CHCH2OH, is to be transformed into the compounds a to l using reagents A to N. Reagents: A Hg(OAc)2 in H2O; B PBr3 and heat; C NaBH4 in alcohol; D LiAlH4 in THF (aqueous workup); E NaCN in alcohol; F PCC in CH2Cl2; G Jones’ reagent (CrO3 in H3O+); H HBr in CH2Cl2; I H3PO4 and heat; J (CH3CO)2O + pyridine; K NaN3 in aqueous alcohol; L C6H5CO3H in CH2Cl2 (peracid); M NaH in ether and heat; N C2H5OH + acid catalyst and heat. Products (steps): a (CH3)2CHCH2Br (one); b (CH3)2C=CH2 (one); c (CH3)2CHCH=O (one); d (CH3)2CHCO2H (one); e (CH3)3CBr (two); f (CH3)2CHCH2C≡N (two); g (CH3)2CHCH2OCOCH3 (one); h (CH3)2CHCO2C2H5 (two); i (CH3)2CHCH2OCH2CH(CH3)2 (two); j (CH3)3COH (three); k (CH3)2CHCH2NH2 (three); l (CH3)2CHCH2CH2NH2 (two).

Solution.
ProductReagents (from key)
aB
bI
cF
dG
eI, H or 2H
fB, E or 1, E
gJ
hG, N or 4N
iN
jI, A, C or 2AC or ILD or 2LD
kB, K, D or 1KD
lB, E, D or 1ED or 6D

Answer (from key), as printed. Codes such as ‘2H’, ‘4N’, ‘1KD’ mean a previously prepared compound (by its number/letter) is used as a reactant, as the question allows.

Teacher's Note: PBr3 gives bromide, NaCN then LiAlH4 gives amine; H3PO4 dehydrates to alkene, Markovnikov hydration follows.

Exam Note: Write reagents in order; reuse earlier products as allowed.

Subjective Problems

Question Subjective Problem 1. trans-1-Bromo-3-methylcyclohexane-type substrate (Br hashed, CH3 wedged) in CH3OH. X = total number of substitution and elimination product(s). Find the value of X.

Solution. Answer (from key): X = 4.

Teacher's Note: Count substitution stereoisomers plus distinct alkenes from the cation.

Exam Note: Count stereoisomers separately.

Download MS Chauhan Solutions for JEE Math PDF

Chapter-wise MS Chauhan Solutions: MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 c Alkyl Halides

Review detailed solutions for JEE Mathematics. The MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 5 c Alkyl Halides PDF provides comprehensive answers mapped to standard MS Chauhan Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

In addition to these MS Chauhan Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these MS Chauhan Solutions for JEE Chemistry?

They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the MS Chauhan JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these MS Chauhan solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising MS Chauhan JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.