Narendra Awasthi Solutions Physical Chemistry Chapter 6 Ionic Equilibrium Part 1

Download JEE Chemistry Narendra Awasthi Textbook Solutions: Chapter 06 Ionic Equilibrium

Explore reliable textbook solutions for Chapter 06 Ionic Equilibrium tailored for JEE learners using Narendra Awasthi methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Access Narendra Awasthi Textbook Answers and Solutions

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 6 Ionic Equilibrium - Part 1 (Problems in Chemistry: Level 1, Level 2, Level 3 Passages 1-2)

Level 1

Question 1.1. Morphine (C17H19NO3), which is used medically to relieve pain, is a base. What is its conjugate acid?

(a) C17H18NO3+ (b) C17H18NO3 (c) C17H20NO3- (d) C17H20NO3+

Solution. Answer: (d) C17H20NO3+. A conjugate acid is formed by adding H+ to the base: C17H19NO3 + H+ gives C17H20NO3+.

Teacher's Note: Conjugate acid = base + H+; the charge goes up by one.

Exam Note: Add H+ to base; adjust charge.

Question 1.2. The conjugate base of H2PO4- is:

(a) H3PO4 (b) H2PO4- (c) HPO42- (d) PO43-

Solution. Answer: (c) HPO42-. Conjugate base = species minus one H+: H2PO4- loses H+ to give HPO42-.

Teacher's Note: Remove one proton for the conjugate base; do not remove two.

Exam Note: Subtract exactly one H+.

Question 1.3. The strongest Bronsted base in the following anion is:

(a) CN- (b) Cl- (c) I- (d) Br-

Solution. Answer: (a) CN-. The strongest base is the conjugate base of the weakest acid. HCN is a weak acid while HCl, HBr and HI are strong, so CN- is the strongest base.

Teacher's Note: Strong acids have negligible conjugate bases; HCN being weak makes CN- basic.

Exam Note: Weakest conjugate acid means strongest base.

Question 1.4. Which salt can furnish H+ in its aqueous solution?

(a) NaH2PO2 (b) Na2HPO3 (c) Na2HPO4 (d) All of these

Solution. Answer: (c) Na2HPO4. H3PO2 is monobasic and H3PO3 is dibasic, so NaH2PO2 and Na2HPO3 are normal salts with no ionisable H. Na2HPO4 is an acid salt (HPO42- still has one ionisable H).

Teacher's Note: Hypophosphorous acid is monobasic and phosphorous acid dibasic, so their salts are normal.

Exam Note: Count basicity of the parent acid.

Question 1.5. Which is the set of amphiprotic species?

(a) H3O+, HPO42-, HCO3- (b) H2O, HPO32-, H2PO2- (c) H2PO4-, H2PO3-, H2O (d) All of these

Solution. Answer: (c) H2PO4-, H2PO3-, H2O. Amphiprotic species can both donate and accept H+. H2PO4-, H2PO3- and H2O all have an ionisable H and a lone pair to accept H+. H3O+ (only donates), HPO32- and H2PO2- (no ionisable H) are not amphiprotic.

Teacher's Note: Amphiprotic means ionisable H plus ability to accept a proton.

Exam Note: Check each species for both abilities.

Question 1.6. The Ka values for HPO42- and HSO3- are 4.8 × 10-13 and 6.3 × 10-8 respectively. Therefore, it follows that the HPO42- is a ......... acid than HSO3- and PO43- is a ......... base than SO32-.

(a) weaker, stronger (b) stronger, weaker (c) weaker, weaker (d) stronger, stronger

Solution. Answer: (a) weaker, stronger. Smaller Ka means weaker acid, so HPO42- is weaker than HSO3-. Its conjugate base PO43- is therefore the stronger base compared with SO32-.

Teacher's Note: Weaker acid has the stronger conjugate base; compare Ka values.

Exam Note: Smaller Ka: weaker acid, stronger conjugate base.

Question 1.7. Given the following Ka values, determine which species is the strongest base: HSO4- = 1.2 × 10-2, H2PO4- = 6.3 × 10-8, HCO3- = 4.7 × 10-11.

(a) CO32- (b) H2SO4 (c) SO42- (d) HPO42-

Solution. Answer: (a) CO32-. HCO3- has the smallest Ka, so it is the weakest acid and its conjugate base CO32- is the strongest base.

Teacher's Note: Pick the weakest acid; its conjugate base wins.

Exam Note: Smallest Ka gives strongest conjugate base.

Question 1.8. Given that Kw for water is 10-13 M2 at 62°C, compute the sum of pOH and pH for a neutral aqueous solution at 62°C:

(a) 7.0 (b) 13.30 (c) 14.0 (d) 13.0

Solution. Answer: (d) 13.0. pH + pOH = pKw = -log(10-13) = 13.0.

Teacher's Note: pH + pOH equals pKw, which is 14 only at 25°C.

Exam Note: Use pKw at the given temperature.

Question 1.9. The value of the ion product constant for water (Kw) at 60°C is 9.6 × 10-14 M2. What is the [H3O+] of a neutral aqueous solution at 60°C and an aqueous solution with a pH = 7.0 at 60°C respectively?

(a) 3.1 × 10-8, acidic (b) 3.1 × 10-7, neutral (c) 3.1 × 10-8, basic (d) 3.1 × 10-7, basic

Solution. Answer: (d) 3.1 × 10-7, basic. Neutral: [H3O+] = √(9.6 × 10-14) = 3.1 × 10-7 M (pH 6.5). A solution of pH 7.0 has [H+] = 10-7 M, which is less than 3.1 × 10-7 M, so it is basic.

Teacher's Note: Neutrality means [H+] = [OH-] = √Kw, not pH 7 at higher T.

Exam Note: Neutral pH shifts below 7 on heating.

Question 1.10. For pure water:

(a) pH increases while pOH decreases with rise in temperature (b) pH decreases while pOH increases with rise in temperature (c) both pH and pOH decreases with rise in temperature (d) both pH and pOH increases with rise in temperature

Solution. Answer: (c) both pH and pOH decreases with rise in temperature. Ionisation of water is endothermic, so Kw rises with temperature. [H+] = [OH-] both increase, hence both pH and pOH decrease.

Teacher's Note: Kw rises with T, so both pH and pOH of pure water fall.

Exam Note: Pure water stays neutral at every T.

Question 1.11. A beer has a pH of 4.30. What is the [H3O+]?

(a) 3.0 × 10-4 (b) 2.0 × 10-4 (c) 2.0 × 10-5 (d) 5.0 × 10-5

Solution. Answer: (d) 5.0 × 10-5. [H3O+] = 10-4.30 = 100.70 × 10-5 = 5.0 × 10-5 M.

Teacher's Note: Antilog of -4.30 is 5.0e-5; write 4.30 as 5 - 0.70.

Exam Note: Use 10^-pH with log 5 = 0.70.

Question 1.12. The hydrogen ion concentration of the oceans is about 2 × 10-9 M. What is the pH?

(a) 8.85 (b) 9.3 (c) 7.85 (d) 8.7

Solution. Answer: (d) 8.7. pH = -log(2 × 10-9) = 9 - 0.30 = 8.7.

Teacher's Note: pH = 9 - log 2 when [H+] = 2e-9.

Exam Note: Use log 2 = 0.30.

Question 1.13. The hydroxide ion concentration of a wine is 8 × 10-11 M. What is the pH of the wine?

(a) 2.10 (b) 2.9 (c) 3.9 (d) 4.9

Solution. Answer: (c) 3.9. pOH = -log(8 × 10-11) = 11 - 0.90 = 10.10, so pH = 14 - 10.10 = 3.9.

Teacher's Note: Find pOH first, then subtract from 14.

Exam Note: pOH = 11 - log 8, pH = 14 - pOH.

Question 1.14. The pH of a solution is 5. To this solution acid was added so that pH value becomes 2.0. The increase in H+ concentration is:

(a) 100 times (b) 5 times (c) 2.5 times (d) 1000 times

Solution. Answer: (d) 1000 times. [H+] changes from 10-5 to 10-2 M, a factor of 103 = 1000.

Teacher's Note: Each pH unit is a factor of ten in [H+].

Exam Note: Three pH units mean 1000 times.

Question 1.15. A solution has a pH = 9, it is 1000 times more basic than the original solution. What was the pH of the original solution?

(a) 12 (b) 6 (c) 9 (d) 10

Solution. Answer: (b) 6. [OH-] is 1000 times that of the original, so pOH is lower by 3. Present pOH = 5, original pOH = 8, original pH = 6.

Teacher's Note: More basic by 10^3 means pH higher by 3 than the original.

Exam Note: Original pH = 9 - 3 = 6.

Question 1.16. Equal volumes of two HCl solutions of pH = 3 and pH = 5 were mixed. What was the pH of the resulting solution?

(a) 3.5 (b) 4.0 (c) 4.5 (d) 3.3

Solution. Answer: (d) 3.3. [H+] = (10-3 + 10-5)/2 = 5.05 × 10-4 M, pH = 3.3.

Teacher's Note: Average the concentrations, never the pH values.

Exam Note: Strong acid mixing: add moles, then take log.

Question 1.17. pOH of 0.002 M HNO3 is:

(a) 11 + log 2 (b) 11 - log 2 (c) -3 + log 2 (d) None of these

Solution. Answer: (a) 11 + log 2. [H+] = 2 × 10-3 M, pH = 3 - log 2, pOH = 14 - pH = 11 + log 2.

Teacher's Note: Strong monobasic acid: [H+] equals its molarity.

Exam Note: Find pH then pOH = 14 - pH.

Question 1.18. Number of equivalents of HCl present in 100 mL of its solution whose pH is 4:

(a) 10-4 (b) 10-3 (c) 10-2 (d) 10-5

Solution. Answer: (d) 10-5. [HCl] = 10-4 N; equivalents = 10-4 × 0.1 L = 10-5.

Teacher's Note: Convert pH to normality, then multiply by litres.

Exam Note: Equivalents = N × V in litres.

Question 1.19. To a 10 mL of 10-3 N H2SO4 solution water has been added to make the total volume of one litre. Its pOH would be:

(a) 3 (b) 12 (c) 9 (d) 5

Solution. Answer: (c) 9. N1V1 = N2V2: 10-3 × 10 = N2 × 1000, N2 = 10-5 N. pH = 5, pOH = 9.

Teacher's Note: Normality gives [H+] directly for H2SO4.

Exam Note: Dilute 100 times, then pOH = 14 - pH.

Question 1.20. The pH of a solution of H2SO4 is 1. Assuming complete ionisation, find the molarity of H2SO4 solution:

(a) 0.1 (b) 0.2 (c) 0.05 (d) 2.0

Solution. Answer: (c) 0.05. [H+] = 0.1 M. Each H2SO4 gives 2 H+, so [H2SO4] = 0.05 M.

Teacher's Note: Divide [H+] by 2 for a diprotic acid.

Exam Note: Molarity is half of [H+].

Question 1.21. pH of a strong diprotic acid (H2A) at concentrations: (i) 10-4 M, (ii) 10-4 N are respectively:

(a) 3.7 and 4.0 (b) 4 and 3.7 (c) 4 and 4 (d) 3.7 and 3.7

Solution. Answer: (a) 3.7 and 4.0. (i) 10-4 M H2A gives [H+] = 2 × 10-4, pH = 4 - log 2 = 3.7. (ii) 10-4 N means [H+] = 10-4, pH = 4.0.

Teacher's Note: Molarity and normality differ by the factor of 2 for diprotic acids.

Exam Note: M x 2 = N for H2A; use N as [H+].

Question 1.22. Calcium hydroxide is a strong base. Compute [Ca2+] and [OH-] for a solution that is prepared by dissolving 0.60 g of Ca(OH)2 in enough water to make a 1500 mL of solution. [Atomic weights: Ca = 40, O = 16, H = 1]

(a) 5.4 × 10-3, 9.1 × 10-13 (b) 5.4 × 10-3, 1.08 × 10-2 (c) 5.4 × 10-3, 5.4 × 10-3 (d) 8.1 × 10-3, 8.1 × 10-3

Solution. Answer: (b) 5.4 × 10-3, 1.08 × 10-2. Moles = 0.60/74 = 8.11 × 10-3; [Ca2+] = 8.11 × 10-3/1.5 = 5.4 × 10-3 M. [OH-] = 2 × 5.4 × 10-3 = 1.08 × 10-2 M.

Teacher's Note: Each Ca(OH)2 gives two OH-; molar mass is 74.

Exam Note: [OH-] is twice [Ca2+].

Question 1.23. pH of 10-6 M HCl(aq.) is:

(a) just less than 6 (b) exactly equal to 6 (c) just greater than 6 (d) just less than 7

Solution. Answer: (a) just less than 6. At such low concentration water's own H+ adds: [H+] = 10-6 + x with [H+][OH-] = 10-14, giving [H+] ≈ 1.01 × 10-6 M, pH = 5.996, which is just less than 6.

Teacher's Note: Ignoring water gives exactly 6; including it gives slightly less.

Exam Note: Dilute strong acid: add water's contribution.

Question 1.24. 10-5 M NaOH solution at 25°C is diluted 1000 times. The pH of the resultant solution will:

(a) be equal to 8 (b) lie between 7 and 8 (c) lie between 6 and 7 (d) remain unchanged

Solution. Answer: (b) lie between 7 and 8. After dilution [OH-] from NaOH = 10-8 M, comparable to water's 10-7. Total [OH-] ≈ 1.05 × 10-7, pOH ≈ 6.98, pH ≈ 7.02, so it lies between 7 and 8.

Teacher's Note: A base can never dilute to acidic pH; water's OH- dominates.

Exam Note: Diluted base never reaches pH 8 here.

Question 1.25. 4.0 g of NaOH and 4.9 g of H2SO4 are dissolved in water and volume is made up to 250 mL. The pH of this solution is:

(a) 7.0 (b) 1.0 (c) 2.0 (d) 12.0

Solution. Answer: (a) 7.0. NaOH = 4/40 = 0.1 mol OH-; H2SO4 = 4.9/98 = 0.05 mol, giving 0.1 mol H+. Exactly neutralised, pH = 7.

Teacher's Note: Compare moles of H+ and OH- after n-factor.

Exam Note: H2SO4 supplies two H+ per mole.

Question 1.26. A 25.0 mL sample of 0.10 M HCl is titrated with 0.10 M NaOH. What is the pH of the solution at the points where 24.9 and 25.1 mL of NaOH have been added?

(a) 3.70, 10.70 (b) 3.30, 10.30 (c) 3.70, 10.30 (d) 3.0, 11.0

Solution. Answer: (c) 3.70, 10.30. At 24.9 mL: excess H+ = 0.1 × 0.1 mmol = 0.01 mmol in 49.9 mL = 2.0 × 10-4 M, pH = 3.70. At 25.1 mL: excess OH- = 0.01 mmol in 50.1 mL = 2.0 × 10-4 M, pOH = 3.70, pH = 10.30.

Teacher's Note: Near the equivalence point, 0.1 mL error swings pH by about 6.6 units.

Exam Note: Find excess, divide by total volume.

Question 1.27. What is the pH of a solution in which 25.0 mL of 0.1 M NaOH is added to 25 mL of 0.08 M HCl and final solution is diluted to 500 mL?

(a) 3 (b) 11 (c) 12 (d) 13

Solution. Answer: (b) 11. NaOH = 2.5 mmol, HCl = 2.0 mmol; excess OH- = 0.5 mmol in 500 mL = 10-3 M. pOH = 3, pH = 11.

Teacher's Note: Excess base after neutralisation fixes the pH.

Exam Note: Divide the excess mmol by final volume.

Question 1.28. What is the pH of a solution in which 10.0 mL of 0.010 M Sr(OH)2 is added to 10.0 mL of 0.010 M HCl?

(a) 2.30 (b) 1.50 (c) 11.70 (d) 7.00

Solution. Answer: (c) 11.70. OH- = 2 × 0.010 × 10 = 0.2 mmol; H+ = 0.1 mmol; excess OH- = 0.1 mmol in 20 mL = 5 × 10-3 M. pOH = 2.30, pH = 11.70.

Teacher's Note: Sr(OH)2 gives two OH- per formula unit.

Exam Note: Count OH- as 2 x molarity.

Question 1.29. At 90°C, pure water has [H+] = 10-6 M, if 100 mL of 0.2 M HCl is added to 200 mL of 0.1 M KOH at 90°C then pH of the resulting solution will be:

(a) 5 (b) 6 (c) 7 (d) None of these

Solution. Answer: (b) 6. HCl = 20 meq, KOH = 20 meq, so the solution is exactly neutral. At 90°C neutral [H+] = 10-6, pH = 6.

Teacher's Note: Neutral at 90°C is pH 6, not 7.

Exam Note: Equal equivalents mean neutral at that T.

Question 1.30. What change will occur for the following reaction if the hypochlorous acid solution is diluted from 0.1 to 0.01 M? HOCl(aq.) + H2O(l) ⇌ OCl-(aq.) + H3O+(aq.)

(a) a decrease in the fraction of acid ionized (b) an increase in the fraction of acid ionized (c) no change in the fraction of acid ionized (d) we can not predict

Solution. Answer: (b) an increase in the fraction of acid ionized. By Ostwald's dilution law α ∝ 1/√C, so on dilution the degree of ionisation increases.

Teacher's Note: Dilution shifts the weak-acid equilibrium towards ions.

Exam Note: α rises on dilution (Le Chatelier).

Question 1.31. Given Ka values of 5.76 × 10-10 and 4.8 × 10-10 for NH4+ and HCN respectively. What is the equilibrium constant for the following reaction? NH4+(aq.) + CN-(aq.) ⇌ NH3(aq.) + HCN(aq.)

(a) 0.83 (b) 1.2 (c) 8.0 × 10-11 (d) 27.6 × 10-10

Solution. Answer: (b) 1.2. K = Ka(NH4+)/Ka(HCN) = 5.76 × 10-10/4.8 × 10-10 = 1.2.

Teacher's Note: Reaction = NH4+ acting as acid, CN- as base: divide Ka values.

Exam Note: K = Ka(acid donor)/Ka(HCN).

Question 1.32. Which is the strongest acid (pKa value is given)?

(a) HCOOH [3.77] (b) C6H5COOH [4.22] (c) CH3COOH [4.7] (d) CH3CH2COOH [4.88]

Solution. Answer: (a) HCOOH [3.77]. The smallest pKa means the largest Ka, so HCOOH (3.77) is the strongest acid.

Teacher's Note: Lower pKa means stronger acid.

Exam Note: Smallest pKa is strongest acid.

Question 1.33. Given: Enthalpy of ionization of two acids: ΔH°(HCN) = 45.2 kJ mol-1; ΔH°(CH3COOH) = 2.1 kJ mol-1. Which relationship between the two acids is true?

(a) pKa(HCN) = pKa(CH3COOH) (b) pKa(HCN) > pKa(CH3COOH) (c) pKa(HCN) < pKa(CH3COOH) (d) pKa(HCN) = (45.2/2.1) pKa(CH3COOH)

Solution. Answer: (b) pKa(HCN) > pKa(CH3COOH). HCN ionises with a far larger positive enthalpy and is much the weaker acid (Ka about 10-10 against 1.8 × 10-5), so pKa(HCN) > pKa(CH3COOH).

Teacher's Note: More endothermic ionisation means smaller K and larger pKa.

Exam Note: Weaker acid has larger pKa.

Question 1.34. What is the hydronium ion concentration of a 0.25 M HA solution? (Ka = 4 × 10-8)

(a) 10-4 (b) 10-5 (c) 10-7 (d) 10-10

Solution. Answer: (a) 10-4. [H+] = √(KaC) = √(4 × 10-8 × 0.25) = √(10-8) = 10-4 M.

Teacher's Note: Weak acid with negligible α: [H+] = sqrt(KaC).

Exam Note: Use [H+] = sqrt(Ka C).

Question 1.35. What is the percent ionization (α) of a 0.01 M HA solution? (Ka = 10-4)

(a) 9.5% (b) 1% (c) 10.5% (d) 17%

Solution. Answer: (a) 9.5%. Ka = Cα²/(1 - α): 10-4 = 0.01α²/(1 - α) gives α = 0.095, i.e. 9.5%. (The approximation α = 0.1 is not valid since α is not negligible.)

Teacher's Note: α is about 10 percent here, so the 1 - α term must be kept.

Exam Note: Solve the quadratic when α > 5 percent.

Question 1.36. Given the two concentration of HCN (Ka = 10-9) are 0.1 M and 0.001 M respectively. What will be the ratio of degree of dissociation?

(a) 1 (b) 0.1 (c) 0.003 (d) 0.01

Solution. Answer: (b) 0.1. α = √(Ka/C), so α1/α2 = √(0.001/0.1) = 0.1.

Teacher's Note: Ostwald: α inversely proportional to square root of C.

Exam Note: Ratio = sqrt(C2/C1).

Question 1.37. A 0.10 M solution of HF is 8.0% ionized. What is the Ka?

(a) 6.4 × 10-4 (b) 8.8 × 10-4 (c) 6.95 × 10-4 (d) 7.6 × 10-4

Solution. Answer: (c) 6.95 × 10-4. Ka = Cα²/(1 - α) = 0.10 × (0.08)²/0.92 = 6.96 × 10-4, i.e. about 6.95 × 10-4.

Teacher's Note: With α = 8 percent, keep (1 - α) for precision.

Exam Note: Use Ka = Cα²/(1-α).

Question 1.38. A weak base MOH of 0.1 N concentration shows a pH value of 9. What is the percentage degree of ionization of the base?

(a) 0.01% (b) 0.001% (c) 0.1% (d) 0.02%

Solution. Answer: (a) 0.01%. pH = 9, so [OH-] = 10-5 M = Cα, giving α = 10-5/0.1 = 10-4 = 0.01%.

Teacher's Note: Find [OH-] from pH, divide by C.

Exam Note: α = [OH-]/C.

Question 1.39. 0.01 M HA(aq.) is 2% ionized; [OH-] of solution is:

(a) 2 × 10-4 (b) 10-8 (c) 5 × 10-11 (d) 5 × 10-12

Solution. Answer: (c) 5 × 10-11. [H+] = 0.01 × 0.02 = 2 × 10-4 M; [OH-] = 10-14/(2 × 10-4) = 5 × 10-11 M.

Teacher's Note: Question asks for [OH-], not [H+].

Exam Note: Divide Kw by [H+].

Question 1.40. If degree of ionisation is 0.01 of decimolar solution of weak acid HA then pKa of acid is:

(a) 2 (b) 3 (c) 5 (d) 7

Solution. Answer: (c) 5. Ka = Cα² = 0.1 × (0.01)² = 10-5, so pKa = 5.

Teacher's Note: Decimolar means 0.1 M; use Ka = Cα^2.

Exam Note: pKa = -log(Cα²).

Question 1.41. What concentration of HCOO- is present in a solution of 0.01 M HCOOH (Ka = 1.8 × 10-4) and 0.01 M HCl?

(a) 1.8 × 10-3 (b) 10-2 (c) 1.8 × 10-4 (d) 10-4

Solution. Answer: (c) 1.8 × 10-4. HCl suppresses ionisation (common ion): Ka = (0.01 + x)x/(0.01 - x) ≈ x. So [HCOO-] = Ka = 1.8 × 10-4 M.

Teacher's Note: Strong acid makes [H+] = [HA], so [A-] = Ka.

Exam Note: Common-ion: neglect x against 0.01.

Question 1.42. Choose the correct code. Column-I: (P) pKb of X- (Ka of HX = 10-6); (Q) pKb of 10-8 M HCl [as printed; the matching value 6.9 is the pH of 10-8 M HCl]; (R) pH of 10-2 M acetic solution (Take Ka of acetic acid = 1.6 × 10-5); (S) pOH of a solution obtained by mixing equal volumes of solution with pH 3 and 5. Column-II: (1) 6.9, (2) 8, (3) 10.7, (4) 3.4

(a) P-1, Q-2, R-4, S-3 (b) P-4, Q-3, R-2, S-1 (c) P-2, Q-1, R-4, S-3 (d) P-1, Q-2, R-3, S-4

Solution. Answer: (c) P-2, Q-1, R-4, S-3. (P) pKb = 14 - 6 = 8, so 2. (Q) 10-8 M HCl: [H+] = 1.05 × 10-8 + water's share gives pH = 6.98 ≈ 6.9, so 1. (R) [H+] = √(1.6 × 10-5 × 10-2) = 4 × 10-4, pH = 3.4, so 4. (S) [H+] = 5.05 × 10-4, pH = 3.3, pOH = 10.7, so 3. Code: P-2, Q-1, R-4, S-3.

Teacher's Note: Match each by computing separately; very dilute acid stays near pH 7.

Exam Note: Compute each entry, then match.

Question 1.43. How much water must be added to 300 mL of 0.2 M solution of CH3COOH (Ka = 1.8 × 10-5) for the D.O.I. (α) of the acid to double?

(a) 600 mL (b) 900 mL (c) 1200 mL (d) 1500 mL

Solution. Answer: (b) 900 mL. Ka = Cα², so C must fall to one-fourth: C2 = 0.05 M. V2 = 0.2 × 300/0.05 = 1200 mL. Water to add = 1200 - 300 = 900 mL.

Teacher's Note: Doubling α needs concentration to become one-fourth.

Exam Note: Subtract initial volume from final volume.

Question 1.44. What is [NH4+] in a solution that contain 0.02 M NH3 (Kb = 1.8 × 10-5) and 0.01 M KOH?

(a) 9 × 10-6 (b) 1.8 × 10-5 (c) 3.6 × 10-5 (d) None of these

Solution. Answer: (c) 3.6 × 10-5. KOH suppresses NH3 ionisation, so [OH-] ≈ 0.01 M. [NH4+] = Kb[NH3]/[OH-] = 1.8 × 10-5 × 0.02/0.01 = 3.6 × 10-5 M.

Teacher's Note: Common OH- from KOH fixes [OH-].

Exam Note: Use Kb = [NH4+][OH-]/[NH3].

Question 1.45. A hand book states that the solubility of RNH2(g) in water at 1 atm and 25°C is 22.41 volumes of gas per volume of water. (pKb of RNH2 = 4) Find the max. pOH that can be attained by dissolving RNH2 in water:

(a) 1 (b) 2 (c) 4 (d) 6

Solution. Answer: (b) 2. Taking 22.41 volumes of gas as 22.41 L per litre (1 mol/L), C = 1 M. [OH-] = √(KbC) = √(10-4 × 1) = 10-2, so pOH = 2.

Teacher's Note: 22.41 L of gas is about 1 mole, so saturation is near 1 M.

Exam Note: Convert gas volume to molarity first.

Question 1.46. The [H+] of a resulting solution that is 0.01 M acetic acid (Ka = 1.8 × 10-5) and 0.01 M in benzoic acid (Ka = 6.3 × 10-5):

(a) 9 × 10-4 (b) 81 × 10-4 (c) 9 × 10-5 (d) 2.8 × 10-3

Solution. Answer: (a) 9 × 10-4. [H+] = √(Ka1C1 + Ka2C2) = √(1.8 × 10-7 + 6.3 × 10-7) = √(8.1 × 10-7) = 9 × 10-4 M.

Teacher's Note: Two weak acids: add Ka x C terms under one root.

Exam Note: Use sqrt(Ka1C1 + Ka2C2).

Question 1.47. 6.0 g weak acid HA (mol. wt. = 60 g/mol.) is dissolved and formed 10 m3 solution. If Ka(HA) = 10-9, then pOH of solution is: [Given: log 4 = 0.6]

(a) 6.7 (b) greater than 6.7 and less than 7.0 (c) greater than 7.0 and less than 7.3 (d) greater than 7.3

Solution. Answer: (c) greater than 7.0 and less than 7.3. C = 0.1 mol/104 L = 10-5 M. Acid is extremely weak so water's ionisation counts: [H+]2 = KaC + Kw = 10-14 + 10-14 = 2 × 10-14, [H+] = 1.41 × 10-7, pH = 6.85, pOH = 7.15 (between 7.0 and 7.3).

Teacher's Note: Very dilute weak acid: water's Kw is as large as KaC.

Exam Note: Include Kw when Ka times C is near 1e-14.

Question 1.48. Carbonic acid (H2CO3), a diprotic acid has Ka1 = 4.0 × 10-7 and Ka2 = 7.0 × 10-11. What is the [HCO3-] of a 0.025 M solution of carbonic acid?

(a) 7.8 × 10-3 (b) 6.6 × 10-4 (c) 10-10 (d) 1.0 × 10-4

Solution. Answer: (d) 1.0 × 10-4. Only the first ionisation matters: [HCO3-] = [H+] = √(4 × 10-7 × 0.025) = √(10-8) = 1.0 × 10-4 M.

Teacher's Note: K1 is far bigger than K2, so treat as monoprotic.

Exam Note: Neglect second ionisation.

Question 1.49. Carbonic acid (H2CO3), a diprotic acid has Ka1 = 4.0 × 10-7 and Ka2 = 7.0 × 10-11. What is the [CO32-] of a 0.025 M solution of carbonic acid?

(a) 5.5 × 10-9 (b) 5.5 × 10-8 (c) 7.0 × 10-9 (d) 7.0 × 10-11

Solution. Answer: (d) 7.0 × 10-11. Since [H+] ≈ [HCO3-], Ka2 = [H+][CO32-]/[HCO3-] gives [CO32-] = Ka2 = 7.0 × 10-11 M.

Teacher's Note: In H2A solution alone, [A2-] equals Ka2.

Exam Note: Remember [A2-] = Ka2 when [H+] = [HA-].

Question 1.50. Selenious acid (H2SeO3), a diprotic acid has Ka1 = 3.0 × 10-3 and Ka2 = 5.0 × 10-8. What is the [OH-] of a 0.30 M solution of a selenious acid?

(a) 2.85 × 10-3 (b) 5.0 × 10-3 (c) 5.0 × 10-6 (d) 3.5 × 10-13

Solution. Answer: (d) 3.5 × 10-13. Using Ka1 alone: x2/(0.30 - x) = 3 × 10-3 gives x = [H+] = 0.0285 M. [OH-] = 10-14/0.0285 = 3.5 × 10-13 M.

Teacher's Note: K1 is not tiny, so solve the quadratic; then convert to [OH-].

Exam Note: Quadratic for [H+]; then Kw/[H+].

Question 1.51. Which of the hydrated species can exist? I: H5O2+ II: H3O+ III: H3O2- IV: H7O3+. Select alternate from:

(a) II only (b) I and II (c) I, II and IV (d) I, II, III and IV

Solution. Answer: (d) I, II, III and IV. All four hydrated proton or hydroxide species (H5O2+, H3O+, H3O2-, H7O3+) are known in aqueous solution, so all of I, II, III and IV can exist.

Teacher's Note: H+ and OH- are hydrated by several water molecules in solution.

Exam Note: Known hydrates: H3O+, H5O2+, H7O3+, H3O2-.

Question 1.52. Consider the following salts. Which one(s) when dissolved in water will produce an acidic solution? 1. NH4Cl 2. KHSO4 3. NaCN 4. KNO3

(a) 2 and 3 (b) 1 and 2 (c) only 3 (d) 2 and 4

Solution. Answer: (b) 1 and 2. NH4Cl is a salt of a strong acid and weak base (acidic by cation hydrolysis). KHSO4 gives H+ from HSO4-. NaCN is basic, KNO3 is neutral.

Teacher's Note: Strong acid plus weak base gives acidic salt; acid salts of strong acids ionise H+.

Exam Note: Classify each salt by parent acid and base.

Question 1.53. Consider the following salts. Which one(s) when dissolved in water will produce a basic solution? 1. RbClO4 2. NaNO2 3. NH4Cl 4. NaCl

(a) 1 and 3 (b) only 2 (c) 1 and 2 (d) 3 and 4

Solution. Answer: (b) only 2. NaNO2 is the salt of a weak acid (HNO2) and strong base, so it hydrolyses to give a basic solution. RbClO4 and NaCl are neutral, NH4Cl is acidic.

Teacher's Note: Basic salt needs a weak acid anion; nitrite qualifies.

Exam Note: Only weak-acid anion salts are basic.

Question 1.54. At 25°C dissociation constants of acid HA and base BOH in aqueous solution are same. The pH of 0.01 M solution of HA is 5. The pOH of 10-4 M solution of BOH at the same temperature is:

(a) 3.5 (b) 4 (c) 6 (d) None of these

Solution. Answer: (c) 6. For HA: [H+] = √(KaC), 10-5 = √(Ka × 0.01), so Ka = 10-8 = Kb. For BOH: [OH-] = √(10-8 × 10-4) = 10-6 M, pOH = 6.

Teacher's Note: Same constant means Kb = Ka = 1e-8, found from the acid data.

Exam Note: Get K from HA, apply to the base.

Question 1.55. Which of the following solutions has the highest pH?

(a) 0.2 M HClO4 (b) 0.20 M CH3COOH (c) 0.020 M HCl (d) 0.2 M NaCl

Solution. Answer: (d) 0.2 M NaCl. HClO4, CH3COOH and HCl are acidic (pH < 7), while NaCl solution is neutral (pH 7). NaCl therefore has the highest pH.

Teacher's Note: A neutral salt beats every acidic solution on pH.

Exam Note: Neutral salt pH 7 beats the acids.

Question 1.56. From separate solutions of four sodium salts NaW, NaX, NaY and NaZ had pH 7.0, 9.0, 10.0 and 11.0 respectively, when each solution was 0.1 M, the weakest acid is:

(a) HW (b) HX (c) HY (d) HZ

Solution. Answer: (d) HZ. The highest pH (11.0) means the anion Z- hydrolyses most, so it is the strongest conjugate base and HZ is the weakest acid.

Teacher's Note: Higher pH of sodium salt means weaker parent acid.

Exam Note: Anion hydrolyses more, acid weaker.

Question 1.57. The pH values 0.1 M solution of HCOONa (I), HCOOH (II), CH3COONH4 (III), NaOH (IV), HCl (V), will be in the order:

(a) IV > III > I > II > V (b) IV > I > III > II > V (c) II > III > I > IV > V (d) V > II > III > I > IV

Solution. Answer: (b) IV > I > III > II > V. NaOH (pH 13) > HCOONa (basic, about 8.4) > CH3COONH4 (about neutral, 7) > HCOOH (about 2.4) > HCl (pH 1). Order: IV > I > III > II > V.

Teacher's Note: Rank strong base, basic salt, neutral salt, weak acid, strong acid.

Exam Note: Estimate each pH roughly to order.

Question 1.58. pH of an aqueous NaCl solution at 50°C should be:

(a) 7 (b) > 7 (c) < 7 (d) 0

Solution. Answer: (c) < 7. NaCl does not hydrolyse, so the solution is neutral. At 50°C Kw is larger than 10-14, so neutral pH is below 7.

Teacher's Note: Neutral does not mean pH 7 away from 25°C.

Exam Note: Kw rises with T, so pH of neutral falls.

Question 1.59. Upon hydrolysis of sodium carbonate, the reaction takes place between:

(a) Na+ and water (b) Na+ and OH- (c) CO32- and water (d) CO32- and H+

Solution. Answer: (c) CO32- and water. Na+ comes from a strong base and does not hydrolyse. CO32- + H2O ⇌ HCO3- + OH-, so the reaction is between CO32- and water.

Teacher's Note: Only the weak-acid anion reacts with water.

Exam Note: Write the anion hydrolysis equation.

Question 1.60. The solution of blue vitriol in water is acidic because:

(a) CuSO4 reacts with water (b) Cu2+ reacts with water (c) SO42- reacts with water (d) CuSO4 removes OH- ions from water

Solution. Answer: (b) Cu2+ reacts with water. Cu2+ (cation of a weak base Cu(OH)2) hydrolyses: Cu2+ + 2H2O ⇌ Cu(OH)2 + 2H+. Sulphate does not hydrolyse appreciably.

Teacher's Note: Hydrolysis of the cation of a weak base produces H+.

Exam Note: Name the ion that hydrolyses.

Question 1.61. 1 mL of 0.1 N HCl is added to 999 mL solution of NaCl. The pH of the resulting solution will be:

(a) 7 (b) 4 (c) 2 (d) 1

Solution. Answer: (b) 4. Dilution 1 mL to 1000 mL gives [H+] = 0.1/1000 = 10-4 M, so pH = 4.

Teacher's Note: NaCl is neutral and only dilutes the acid 1000 times.

Exam Note: Dilution factor 1000 raises pH by 3 from 1.

Question 1.62. If a salt of strong acid and weak base hydrolyses appreciably (α = 0.1), which of the following formula is to be used to calculate degree of hydrolysis 'α'?

(a) α = √(Kw/(Ka·a)) (b) α = √(Kw/(Kb·a)) (c) α = √(Kw/(Ka·Kb)) (d) None of these

Solution. Answer: (d) None of these. The formulas of type α = √(Kh/C) assume α is negligible. With α = 0.1 (not negligible) the exact relation Kh = Cα²/(1 - α) must be used, so none of the given formulas applies. (As printed, the options also do not match the standard formula α = √(Kw/(KbC)).)

Teacher's Note: The square-root formula needs small α; here use the full expression.

Exam Note: Approximation fails when α is 10 percent.

Question 1.63. The correct formula to calculate the hydroxyl ion concentration of an aqueous solution of NH4NO3 is:

(a) √(C × Kw/Kb) (b) √(Kw × Kb/C) (c) √(C × Kw/Ka) (d) √(Ka × Kw/C)

Solution. Answer: (b) √(Kw × Kb/C). For NH4+: [H+] = √(KwC/Kb). Then [OH-] = Kw/[H+] = √(KwKb/C).

Teacher's Note: Find [H+] first; then [OH-] = Kw/[H+].

Exam Note: Invert the hydrolysis [H+] expression.

Question 1.64. [H+] = √(KwKa/C) is suitable for:

(a) NaCl, NH4Cl (b) CH3COONa, NaCN (c) CH3COONa, (NH4)2SO4 (d) CH3COONH4, (NH4)2CO3

Solution. Answer: (b) CH3COONa, NaCN. This formula applies to the salt of a weak acid and a strong base (anion hydrolysis), e.g. CH3COONa and NaCN: [OH-] = √(KwC/Ka), so [H+] = √(KwKa/C).

Teacher's Note: Anion hydrolysis uses Ka in the formula; cation hydrolysis uses Kb.

Exam Note: Match formula to type of salt.

Question 1.65. What is the hydrolysis constant of the OCl- ion? The ionization constant of HOCl is 3.0 × 10-8.

(a) 3.33 × 10-8 (b) 3.33 × 10-7 (c) 3.0 × 10-7 (d) 3.33 × 10-6

Solution. Answer: (b) 3.33 × 10-7. Kh = Kw/Ka = 10-14/(3.0 × 10-8) = 3.33 × 10-7.

Teacher's Note: Kh equals Kw over Ka of the conjugate acid.

Exam Note: Kh = Kw/Ka.

Question 1.66. What is the pH of a 0.10 M C6H5O- solution? The Ka of C6H5OH is 1.0 × 10-10.

(a) 10.51 (b) 11.04 (c) 11.50 (d) 12

Solution. Answer: (c) 11.50. Kh = 10-14/10-10 = 10-4; [OH-] = √(10-4 × 0.1) = 3.16 × 10-3, pOH = 2.50, pH = 11.50.

Teacher's Note: Phenoxide hydrolyses; get Kh, then pOH.

Exam Note: pH = 7 + (pKa + log C)/2.

Question 1.67. Calculate the [OH-] in 0.01 M aqueous solution of NaOCN (Kb for OCN- = 10-10):

(a) 10-6 M (b) 10-7 M (c) 10-8 M (d) None of these

Solution. Answer: (a) 10-6 M. [OH-] = √(KbC) = √(10-10 × 0.01) = √(10-12) = 10-6 M.

Teacher's Note: Given Kb of the anion, use sqrt(KbC) directly.

Exam Note: Use Kb directly, not Kh = Kw/Ka.

Question 1.68. What is the ionization constant of an acid if the hydronium ion concentration of a 0.40 M solution is 1.40 × 10-4 M?

(a) 1.96 × 10-8 (b) 1.22 × 10-9 (c) 4.90 × 10-8 (d) 1.40 × 10-6

Solution. Answer: (c) 4.90 × 10-8. Ka = [H+]2/C = (1.40 × 10-4)2/0.40 = 1.96 × 10-8/0.40 = 4.90 × 10-8.

Teacher's Note: Divide the square of [H+] by the concentration.

Exam Note: Ka = [H+]^2/C.

Question 1.69. The degree of hydrolysis of 0.1 M RNH3Cl solution is 1.0%. If the concentration of RNH3Cl is made 0.4 M, what is the new degree of hydrolysis (in percentage)?

(a) 0.01 (b) 0.001 (c) 0.2 (d) 0.5

Solution. Answer: (d) 0.5. h ∝ 1/√C. h2 = 1.0 × √(0.1/0.4) = 0.5%.

Teacher's Note: Degree of hydrolysis falls on concentrating, as 1/sqrt(C).

Exam Note: h varies inversely as sqrt of C.

Question 1.70. % hydrolysis of 0.1 M CH3COONH4, when Ka(CH3COOH) = Kb(NH4OH) = 1.8 × 10-5 is:

(a) 0.55 (b) 7.63 (c) 0.55 × 10-2 (d) 7.63 × 10-3

Solution. Answer: (a) 0.55. h = √(Kw/(KaKb)) = √(10-14/(3.24 × 10-10)) = 5.55 × 10-3, i.e. 0.55%.

Teacher's Note: For a weak acid/weak base salt h is independent of concentration.

Exam Note: Convert fraction to percent.

Question 1.71. The enthalpy of neutralisation of four acids HA, HB, HC and HD with NaOH are -13, -12, -11, -10 kcal/mol. Which salt has maximum degree of hydrolysis?

(a) 1 M NaA (b) 1 M NaB (c) 1 M NaC (d) 1 M NaD

Solution. Answer: (d) 1 M NaD. The least exothermic neutralisation (-10) belongs to the weakest acid HD (part of the heat is used for its ionisation). Its salt NaD has the greatest hydrolysis.

Teacher's Note: Weak acids release less neutralisation heat; weakest acid gives most hydrolysed salt.

Exam Note: Weakest acid: lowest heat of neutralisation.

Question 1.72. Calculate [H+] at equivalent point between titration of 0.1 M, 25 mL of weak acid HA (Ka(HA) = 10-5) with 0.05 M NaOH solution:

(a) 3 × 10-9 (b) 1.732 × 10-9 (c) 8 (d) 10

Solution. Answer: (b) 1.732 × 10-9. NaOH needed = 2.5 mmol/0.05 = 50 mL; total volume 75 mL; [A-] = 2.5/75 = 0.0333 M. Kh = 10-9; [OH-] = √(10-9 × 0.0333) = 5.77 × 10-6; [H+] = 10-14/5.77 × 10-6 = 1.73 × 10-9 M.

Teacher's Note: Volume doubles by 3 here, so salt concentration is 0.0333 M not 0.05 M.

Exam Note: Use total volume at equivalence.

Question 1.73. When a salt of weak acid and weak base is dissolved in water at 25°C, the pH of the resulting solution will always:

(a) be 7 (b) be greater than 7 (c) be less than 7 (d) depend upon Ka and Kb values

Solution. Answer: (d) depend upon Ka and Kb values. pH = 7 + ½(pKa - pKb), so it is acidic, neutral or basic depending on the relative Ka and Kb.

Teacher's Note: Compare Ka of cation with Kb of anion.

Exam Note: Answer depends on Ka versus Kb.

Question 1.74. What will be the pH of an aqueous solution of 1.0 M ammonium formate? Given: pKa = 3.8 and pKb = 4.8

(a) 7.5 (b) 3.4 (c) 6.5 (d) 10.2

Solution. Answer: (c) 6.5. pH = 7 + ½(pKa - pKb) = 7 + ½(3.8 - 4.8) = 6.5.

Teacher's Note: Formula for WA-WB salt does not involve concentration.

Exam Note: Insert pKa and pKb in 7 + (pKa - pKb)/2.

Question 1.75. What will be the pH and % α (degree of hydrolysis) respectively for the salt BA of 0.1 M concentration? Given: Ka for HA = 10-6 and Kb for BOH = 10-6

(a) 5, 1% (b) 7, 10% (c) 9, 10% (d) 7, 0.01%

Solution. Answer: (b) 7, 10%. pH = 7 + ½(6 - 6) = 7. h = √(Kw/(KaKb)) = √(10-14/10-12) = 0.1 = 10%.

Teacher's Note: Equal Ka and Kb means neutral solution but still sizeable hydrolysis.

Exam Note: h = sqrt(Kw/KaKb).

Question 1.76. The percentage degree of hydrolysis of a salt of weak acid (HA) and weak base (BOH) in its 0.1 M aqueous solution is found to be 10%. If the molarity of the solution is 0.05 M, the percentage hydrolysis of the salt should be:

(a) 5% (b) 10% (c) 20% (d) None of these

Solution. Answer: (b) 10%. For a salt of a weak acid and weak base, h = √(Kw/(KaKb)) is independent of concentration, so it remains 10%.

Teacher's Note: Degree of hydrolysis of such a salt does not depend on C.

Exam Note: h independent of concentration.

Question 1.77. What is the hydronium ion concentration of a 0.02 M solution of Cu2+ solution of copper(II) perchlorate? The acidity constant of the following reaction is 5 × 10-9. Cu2+(aq.) + 2H2O(l) ⇌ Cu(OH)+(aq.) + H3O+(aq.)

(a) 1 × 10-5 (b) 7 × 10-4 (c) 5 × 10-4 (d) 1 × 10-4

Solution. Answer: (a) 1 × 10-5. [H3O+] = √(KaC) = √(5 × 10-9 × 0.02) = √(10-10) = 1 × 10-5 M.

Teacher's Note: The hydrated metal ion acts as a weak acid with given Ka.

Exam Note: Treat as weak acid: sqrt(KaC).

Question 1.78. What is the acidity constant for the following reaction given that the hydronium ion concentration of a 0.04 M solution of Ni2+ solution of nickel(II) perchlorate is 4.5 × 10-6? Ni2+(aq.) + 2H2O(l) ⇌ Ni(OH)+(aq.) + H3O+(aq.)

(a) 2 × 10-12 (b) 4 × 10-6 (c) 5 × 10-12 (d) 5 × 10-10

Solution. Answer: (d) 5 × 10-10. Ka = [H3O+]2/C = (4.5 × 10-6)2/0.04 = 2.03 × 10-11/0.04 = 5.1 × 10-10, i.e. about 5 × 10-10.

Teacher's Note: Ka = [H+]^2/C for the aquo ion.

Exam Note: Square [H3O+], divide by C.

Question 1.79. Calculate the pH at 25°C of a solution that is 0.10 M in Fe(NO3)3. The acid dissociation constant for the reaction given below is 1.0 × 10-3. [Fe(H2O)6]3+ + H2O(l) ⇌ H3O+(aq.) + [Fe(H2O)5(OH)]2+

(a) 2.00 (b) 2.02 (c) 2.30 (d) 2.50

Solution. Answer: (b) 2.02. x2/(0.1 - x) = 10-3 gives x2 + 10-3x - 10-4 = 0, x = 9.5 × 10-3 M, pH = 2.02. (The approximation √(10-4) = 0.01 gives 2.00, which is not accurate as α is about 10%.)

Teacher's Note: Ka is large enough that the quadratic is needed.

Exam Note: Do not drop x beside 0.1.

Question 1.80. Approximate pH of 0.01 M NaHA aqueous solution is calculated by: (Ka1 = 10-6 and Ka2 = 10-8 are ionization constants of H2A)

(a) pH = 7 + pKa1/2 + (log C)/2 (b) pH = 7 - pKa1/2 - (log C)/2 (c) pH = (pKa1 + pKa2)/2 (d) None of these

Solution. Answer: (c) pH = (pKa1 + pKa2)/2. HA- is amphiprotic, so [H+] = √(Ka1Ka2) and pH = (pKa1 + pKa2)/2.

Teacher's Note: Amphiprotic ion: pH is the mean of the two pKa values.

Exam Note: Independent of concentration.

Question 1.81. H3PO4 is a weak triprotic acid; approximate pH of 0.1 M Na2HPO4(aq.) is calculated by:

(a) ½[pKa1 + pKa2] (b) ½[pKa2 + pKa3] (c) ½[pKa1 + pKa3] (d) pKa1 + pKa2

Solution. Answer: (b) ½[pKa2 + pKa3]. HPO42- is the amphiprotic species between H2PO4- and PO43-, so pH = ½(pKa2 + pKa3).

Teacher's Note: Use the two pKa values on either side of the amphiprotic ion.

Exam Note: Neighbouring pKa values for HPO4 2-.

Question 1.82. Which of the following is a buffer solution?

(a) 500 mL of 0.1 N CH3COOH + 500 mL of 0.1 N NaOH (b) 500 mL of 0.1 N CH3COOH + 500 mL of 0.1 N HCl (c) 500 mL of 0.1 N CH3COOH + 500 mL of 0.2 N NaOH (d) 500 mL of 0.2 N CH3COOH + 500 mL of 0.1 N NaOH

Solution. Answer: (d) 500 mL of 0.2 N CH3COOH + 500 mL of 0.1 N NaOH. In (d), 100 meq acid and 50 meq NaOH leave 50 meq CH3COOH and form 50 meq CH3COONa: an acidic buffer. (a) gives only the salt, (b) a strong acid, (c) excess NaOH.

Teacher's Note: Buffer needs weak acid and its salt, from partial neutralisation.

Exam Note: Excess weak acid after half-neutralisation.

Question 1.83. If 20 mL of 0.1 M NaOH is added to 30 mL of 0.2 M CH3COOH (pKa = 4.74), the pOH of the resulting solution is:

(a) 4.44 (b) 9.56 (c) 8.96 (d) 9.26

Solution. Answer: (b) 9.56. NaOH = 2 mmol, CH3COOH = 6 mmol; after reaction acid = 4 mmol, salt = 2 mmol. pH = 4.74 + log(2/4) = 4.44, so pOH = 14 - 4.44 = 9.56. Corrected: the book's key gives (a) 4.44, which is the pH; the question asks for pOH, so (b) 9.56 is correct.

Teacher's Note: Compute pH by Henderson, then convert, because the question asks pOH.

Exam Note: Read whether pH or pOH is asked.

Question 1.84. H2CO3 + NaHCO3 found in blood helps in maintaining pH of the blood close to 7.4. An excess of acid entering the blood stream is removed by:

(a) HCO3- (b) H2CO3 (c) H+ ion (d) CO32- ion

Solution. Answer: (a) HCO3-. The conjugate base HCO3- of the buffer neutralises the excess H+: HCO3- + H+ → H2CO3.

Teacher's Note: The basic component of a buffer removes added acid.

Exam Note: Added acid is consumed by conjugate base.

Question 1.85. 100 mL of 0.02 M benzoic acid (pKa = 4.20) is titrated using 0.02 M NaOH, pH after 50 mL and 100 mL of NaOH have been added are:

(a) 3.50, 7 (b) 4.2, 7 (c) 4.2, 8.1 (d) 4.2, 8.25

Solution. Answer: (c) 4.2, 8.1. After 50 mL: half neutralised, pH = pKa = 4.2. After 100 mL: equivalence, [C6H5COO-] = 2 mmol/200 mL = 0.01 M; Kh = 10-14/10-4.2 = 1.58 × 10-10; [OH-] = 1.26 × 10-6; pOH = 5.9, pH = 8.1.

Teacher's Note: Half way equals pKa; equivalence is basic from salt hydrolysis.

Exam Note: Use total volume 200 mL at equivalence.

Question 1.86. What is the pH of a solution of 0.28 M acid and 0.84 M of its conjugate base if the ionization constant of acid is 4 × 10-4?

(a) 3.88 (b) 3.34 (c) 7 (d) 10.12

Solution. Answer: (a) 3.88. pH = pKa + log([base]/[acid]) = 3.40 + log(0.84/0.28) = 3.40 + 0.477 = 3.88.

Teacher's Note: Henderson-Hasselbalch with ratio 3.

Exam Note: pKa = -log(4e-4) = 3.40.

Question 1.87. The toxic compound 2,4-dinitrophenol has Ka = 10-4 M. In an experiment, a buffer solution of 2,4-dinitrophenol was prepared with the pH adjusted to 5. Calculate the ratio of the concentrations of the dissociated ion to the undissociated acid:

(a) 0.01 (b) 0.1 (c) 10 (d) 100

Solution. Answer: (c) 10. pH = pKa + log([A-]/[HA]): 5 = 4 + log ratio, so [A-]/[HA] = 10.

Teacher's Note: pH one unit above pKa gives ratio ten.

Exam Note: Ratio = 10^(pH - pKa).

Question 1.88. Equilibrium constant for the following reaction is 1 × 10-9: C5H5N(aq.) + H2O(l) ⇌ C5H5NH+(aq.) + OH-(aq.). Determine the mole of pyridinium chloride (C5H5N·HCl) that should be added to 500 mL solution of 0.4 M pyridine (C5H5N) to obtain a buffer solution of pH = 5:

(a) 0.1 mole (b) 0.2 mole (c) 0.3 mole (d) 0.4 mole

Solution. Answer: (b) 0.2 mole. pOH = 9 = pKb + log([salt]/[base]) = 9 + log(...), so [salt] = [base] = 0.4 M. Moles = 0.4 × 0.5 = 0.2 mol.

Teacher's Note: pH 5 means pOH 9 equal to pKb, so equal salt and base.

Exam Note: Ratio 1 gives moles equal to base.

Question 1.89. Which one of the following mixture does not act as a buffer solution?

(a) Boric acid and borax (b) Sodium phosphate & disodium hydrogen phosphate (c) Sodium propionate and propionic acid (d) Sod. acetate and sodium propionate

Solution. Answer: (d) Sod. acetate and sodium propionate. A buffer needs a weak acid (or base) with its conjugate partner. Sodium acetate and sodium propionate are both salts of weak acids with no acid/base pair, so no buffer.

Teacher's Note: Buffer needs a conjugate acid-base pair, not two salts.

Exam Note: Look for an acid and its conjugate base.

Question 1.90. The acid dissociation constant of uric acid is Ka = 4.0 × 10-6 M. The pH of a sample is 6.0. What is the ratio of urate ion to uric acid in the urine?

(a) 2.0 (b) 4.0 (c) 6.0 (d) 0.25

Solution. Answer: (b) 4.0. [Urate]/[Uric acid] = Ka/[H+] = 4.0 × 10-6/10-6 = 4.0.

Teacher's Note: Ratio of base to acid equals Ka divided by [H+].

Exam Note: Use Ka/[H+].

Question 1.91. CH3NH2 (1.2 mole, pKb = 3.3) is added to 0.08 moles of HCl and the solution is diluted to one litre, resulting pH of solution is:

(a) 10.7 (b) 3.6 (c) 10.4 (d) 11.3

Solution. Answer: (c) 10.4. As printed (1.2 mol): base 1.12 mol, salt 0.08 mol, pOH = 3.3 + log(0.08/1.12) = 2.15, pH = 11.85, which matches no option. The book key (c) 10.4 is obtained if 0.12 mol amine is meant (base 0.04, salt 0.08: pOH = 3.3 + log 2 = 3.6, pH = 10.4). Answer from key: (c) 10.4. Corrected: as printed with 1.2 mol, pH = 11.85; flagged for human check.

Teacher's Note: Basic buffer: use pOH = pKb + log(salt/base), then pH = 14 - pOH.

Exam Note: Check amounts; basic buffer uses pOH.

Question 1.92. An aqueous solution at room temperature is 0.1 M with respect to ammonium chloride and 0.01 M with respect to NH4OH (pKb = 5), the pH of the solution is:

(a) 7.5 (b) 6.8 (c) 6.5 (d) 8.0

Solution. Answer: (d) 8.0. pOH = pKb + log([salt]/[base]) = 5 + log(0.1/0.01) = 6, so pH = 8.0.

Teacher's Note: Basic buffer with more salt than base.

Exam Note: pH = 14 - (pKb + log ratio).

Question 1.93. Which of the following will decrease with dilution at a given temperature?

(a) pH of 10-3 M acetic acid solution (b) pH of 10-3 M aniline solution (c) degree of dissociation of 10-3 M acetic acid (d) degree of dissociation of 10-3 M aniline solution

Solution. Answer: (b) pH of 10-3 M aniline solution. On dilution an acid's pH increases and a base's pH decreases (OH- falls), while the degree of dissociation of weak electrolytes increases. Only the pH of aniline solution decreases.

Teacher's Note: Dilution weakens basicity, so base pH falls toward 7.

Exam Note: Base pH falls, acid pH rises on dilution.

Question 1.94. A 1 L solution contains 0.2 M NH4OH and 0.2 M NH4Cl. If 1.0 mL of 0.001 M HCl is added to it. What will be the [OH-] of the resulting solution (Kb = 2 × 10-5)?

(a) 2 × 10-5 (b) 5 × 10-10 (c) 2 × 10-3 (d) None of these

Solution. Answer: (a) 2 × 10-5. 1 mL of 0.001 M HCl is only 10-6 mol, negligible against 0.2 mol of buffer. [OH-] = Kb[base]/[salt] = 2 × 10-5 × (0.2/0.2) = 2 × 10-5 M.

Teacher's Note: A buffer resists a tiny acid addition.

Exam Note: Equal salt and base gives [OH-] = Kb.

Question 1.95. 0.1 M formic acid is titrated against 0.1 M NaOH solution. What would be the difference in pH between 1/5 and 4/5 stages of neutralisation of acid?

(a) 2 log 3/4 (b) 2 log 1/5 (c) log 1/3 (d) 2 log 4

Solution. Answer: (d) 2 log 4. At 1/5 stage pH = pKa + log(1/4); at 4/5 stage pH = pKa + log(4/1). Difference = log 4 - log(1/4) = 2 log 4.

Teacher's Note: Use Henderson at each stage with salt/acid ratios 1/4 and 4.

Exam Note: Subtract the two Henderson values.

Question 1.96. In the neutralisation process of H3PO4 and NaOH, the number of buffers formed will be:

(a) 3 (b) 1 (c) 2 (d) 4

Solution. Answer: (a) 3. Three buffer pairs are formed: H3PO4/H2PO4-, H2PO4-/HPO42- and HPO42-/PO43-.

Teacher's Note: Each step of a triprotic acid gives a conjugate pair.

Exam Note: One buffer per ionisation step.

Question 1.97. A buffer solution is made up of acetic acid [pKa = 5] having conc. = 1.5 M and sodium acetate having conc. = 0.15 M. What is the number of OH- ions present in 1 litre solution?

(a) 10-10 NA (b) 10-4 NA (c) 10-3 NA (d) 10-6 NA

Solution. Answer: (a) 10-10 NA. pH = 5 + log(0.15/1.5) = 4, so [OH-] = 10-10 M. In 1 L the number of OH- ions = 10-10 NA.

Teacher's Note: Number of ions equals molarity x litres x Avogadro number.

Exam Note: Find pH, then pOH, then count.

Question 1.98. The pH of a solution of 0.10 M CH3COOH increases when which of the following substances is added?

(a) NaHSO4 (b) HClO4 (c) KNO3 (d) K2CO3

Solution. Answer: (d) K2CO3. K2CO3 supplies CO32- which reacts with H+, reducing [H+] and raising pH. NaHSO4 and HClO4 add H+; KNO3 is neutral and has no effect.

Teacher's Note: Basic salt neutralises acid and raises pH.

Exam Note: Basic salt raises pH of acid.

Question 1.99. H+ ion concentration of water does not change by adding:

(a) CH3COONa (b) NaNO3 (c) NaCN (d) Na2CO3

Solution. Answer: (b) NaNO3. NaNO3 is the salt of a strong acid and strong base; it does not hydrolyse, so [H+] is unchanged. The others hydrolyse and change pH.

Teacher's Note: Only a neutral salt leaves [H+] of water unchanged.

Exam Note: Strong acid plus strong base salt.

Question 1.100. pKa of NH4+ is 9.26. Hence, effective range for NH4OH - NH4Cl buffer is about pH:

(a) 8.26 to 10.26 (b) 4.74 to 5.74 (c) 3.74 to 5.74 (d) 8.26 to 9.26

Solution. Answer: (a) 8.26 to 10.26. Useful buffer range is pKa ± 1 = 9.26 ± 1 = 8.26 to 10.26.

Teacher's Note: Buffer range is pKa plus or minus one.

Exam Note: Range = pKa ± 1.

Question 1.101. 1.0 L solution is prepared by mixing 61 gm benzoic acid (pKa = 4.2) with 72 gm of sodium benzoate and then 300 mL 1.0 M HBr solution was added. The pH of final solution is:

(a) 3.6 (b) 3.8 (c) 4.2 (d) 4.8

Solution. Answer: (a) 3.6. Benzoic acid (122 g/mol) = 0.5 mol; sodium benzoate (144 g/mol) = 0.5 mol. HBr (0.3 mol) converts 0.3 mol benzoate to acid: acid = 0.8, salt = 0.2. pH = 4.2 + log(0.2/0.8) = 4.2 - 0.6 = 3.6.

Teacher's Note: Strong acid converts salt to acid; recompute the ratio.

Exam Note: Update moles after adding HBr.

Question 1.102. The pH of a solution containing 0.4 M HCO3- and 0.2 M CO32- is: [Ka1(H2CO3) = 4 × 10-7; Ka2(HCO3-) = 4 × 10-11]

(a) 10.4 (b) 10.1 (c) 6.1 (d) 10.7

Solution. Answer: (b) 10.1. HCO3-/CO32- is a buffer with pKa2 = 10.4: pH = 10.4 + log(0.2/0.4) = 10.4 - 0.3 = 10.1.

Teacher's Note: Use pKa2, since HCO3- is the acid partner of CO3 2-.

Exam Note: pH = pKa2 + log(base/acid).

Question 1.103. The pH of the resultant solution of 20 mL of 0.1 M H3PO4 and 20 mL of 0.1 M Na3PO4 is:

(a) pKa1 + log 2 (b) pKa1 (c) pKa2 (d) (pKa1 + pKa2)/2

Solution. Answer: (c) pKa2. H3PO4 + Na3PO4 (2 mmol each) gives NaH2PO4 + Na2HPO4, equal 2 mmol each of H2PO4- and HPO42-. pH = pKa2 + log 1 = pKa2. The reaction is H3PO4 + PO43- → H2PO4- + HPO42- (1:1).

Teacher's Note: Work out the species formed; the pair decides which pKa applies.

Exam Note: Equal H2PO4- and HPO4 2-: pH = pKa2.

Question 1.104. Which one of the following curves represents the graph of pH during the titration of NaOH and HCl(aq.)? [Figure: four pH versus volume-of-NaOH curves labelled (a) falling S-shaped curve, (b) rising S-shaped curve with a steep vertical rise, (c) gradual rise with kink, (d) V-shaped dip then rise.]

(a) falling S-curve (b) rising S-curve with sharp vertical jump (c) kinked straight line rise (d) V-shaped curve

Solution. Answer: (b) rising S-curve with sharp vertical jump. Titrating HCl with NaOH, pH rises slowly, then jumps steeply near the equivalence point (about pH 3.5 to 10), then levels off: curve (b). (Figure not redrawn; described in words.)

Teacher's Note: Strong acid with strong base: flat, vertical rise, flat.

Exam Note: Sharp vertical rise at equivalence.

Question 1.105. When 100 mL of 0.1 M NaCN solution is titrated with 0.1 M HCl solution the variation of pH of solution with volume of HCl added will be: [Figure: four pH versus volume-of-HCl graphs, (a) rising S-curve, (b) straight falling line, (c) falling S-curve, (d) wavy curve.]

(a) rising S-curve (b) straight falling line (c) falling S-curve (d) wavy curve

Solution. Answer: (c) falling S-curve. NaCN solution starts basic (pH about 11), and pH falls as HCl is added, with a sharp fall near the equivalence point (pH about 5.2 for HCN), then levels off at low pH: the falling S-curve (c), as in the book key. (Figure not redrawn; described in words.)

Teacher's Note: Basic salt titrated by strong acid: pH falls with a steep drop.

Exam Note: Falling S-curve, weak acid at end.

Question 1.106. The best indicator for the detection of end point in titration of a weak acid and a strong base is:

(a) Methyl orange (3.1 to 4.4) (b) Methyl red (4.2 to 6.3) (c) Bromothymol blue (6 to 7.6) (d) Phenolphthalein (8.2 to 10)

Solution. Answer: (d) Phenolphthalein (8.2 to 10). At the end point of weak acid with strong base the solution is basic (pH about 8 to 10), so phenolphthalein (8.2 to 10) is best.

Teacher's Note: Equivalence pH is above 7, so pick an indicator changing in basic range.

Exam Note: Phenolphthalein for weak acid-strong base.

Question 1.107. Select the best indicator from the given table for titration of 20 mL of 0.02 M CH3COOH with 0.02 M NaOH. Given pKa(CH3COOH) = 4.74. Indicators: (I) Bromothymol blue 6.0-7.6; (II) Thymolphthalein 9.3-10.5; (III) Malachite green 11.4-13; (IV) M-Cresol purple 7.4-9.0.

(a) I (b) II (c) III (d) IV

Solution. Answer: (d) IV. At equivalence [CH3COO-] = 0.01 M; pOH = ½(pKb + pC) = ½(9.26 + 2) = 5.63, pH = 8.37. This lies in the m-cresol purple range 7.4 to 9.0, so (IV).

Teacher's Note: Compute equivalence pH, then pick range containing it.

Exam Note: Match indicator range to equivalence pH 8.4.

Question 1.108. Bromothymol blue is an indicator with a Ka value of 6 × 10-5. What % of this indicator is in its basic form at a pH of 5?

(a) 40 (b) 85.7 (c) 14.3 (d) 60

Solution. Answer: (b) 85.7. [In-]/[HIn] = Ka/[H+] = 6 × 10-5/10-5 = 6. Fraction basic = 6/7 = 85.7%.

Teacher's Note: Convert the ratio 6:1 to a percentage of the total.

Exam Note: Percent = 6/7 x 100.

Question 1.109. An acid-base indicator has KHIn = 3.0 × 10-5. The acid form of the indicator is red and the basic form is blue. The change in [H+] required to change the indicator from 75% red to 75% blue is:

(a) 8 × 10-5 M (b) 9 × 10-5 M (c) 1 × 10-5 M (d) 3 × 10-4 M

Solution. Answer: (a) 8 × 10-5 M. 75% red: [HIn]/[In-] = 3, [H+] = 3.0 × 10-5 × 3 = 9 × 10-5. 75% blue: [HIn]/[In-] = 1/3, [H+] = 1 × 10-5. Change = 9 × 10-5 - 1 × 10-5 = 8 × 10-5 M.

Teacher's Note: Compute [H+] at both colour points and subtract.

Exam Note: [H+] = Ka x [HIn]/[In-].

Question 1.110. If an acid-base indicator which is a weak acid has a pKa value = 5.45. At what concentration ratio of sodium acetate to acetic acid would the indicator show a colour half-way between those of its acid and conjugate base forms? [pKa of acetic acid = 4.75]

(a) 4 : 1 (b) 6 : 1 (c) 5 : 1 (d) 3 : 1

Solution. Answer: (c) 5 : 1. Half-way colour means pH = pKIn = 5.45. For the acetate buffer: 5.45 = 4.75 + log(salt/acid), so salt/acid = 100.70 = 5.0, i.e. 5 : 1.

Teacher's Note: Half-way colour occurs at pH equal to pKIn.

Exam Note: Set Henderson pH equal to 5.45.

Question 1.111. A 20.0 mL sample of a 0.20 M solution of the weak diprotic acid H2A is titrated with 0.250 M NaOH. The solution at the second equivalent point is:

(a) 0.10 M NaHA (b) 0.153 M Na2A (c) 0.10 M Na2A (d) 0.0769 M Na2A

Solution. Answer: (d) 0.0769 M Na2A. H2A = 4 mmol needs 8 mmol NaOH = 32 mL. Final volume 52 mL; Na2A = 4/52 = 0.0769 M.

Teacher's Note: Second equivalence needs twice the base and volume increases.

Exam Note: Divide mmol by total volume.

Question 1.112. During the titration of a weak diprotic acid (H2A) against a strong base (NaOH), the pH of the solution half-way to the first equivalent point and that at the first equivalent point are given respectively by:

(a) pKa1 and pKa1 + pKa2 (b) √(Ka1C) and (pKa1 + pKa2)/2 (c) pKa1 and (pKa1 + pKa2)/2 (d) pKa1 and pKa2

Solution. Answer: (c) pKa1 and (pKa1 + pKa2)/2. Half-way to the first equivalence point [H2A] = [HA-], so pH = pKa1. At the first equivalence point HA- is amphiprotic and pH = (pKa1 + pKa2)/2.

Teacher's Note: Half-neutralisation gives pKa1; amphiprotic stage gives the mean.

Exam Note: pKa1, then mean of pKa1 and pKa2.

Question 1.113. In which of the following cases is the solution of AgCl unsaturated?

(a) [Ag+][Cl-] < Ksp (b) [Ag+][Cl-] > Ksp (c) [Ag+][Cl-] = Ksp (d) [Ag+][Cl-] ≤ Ksp

Solution. Answer: (a) [Ag+][Cl-] < Ksp. Unsaturated means ionic product Q is less than Ksp.

Teacher's Note: Q below Ksp means more solid can dissolve.

Exam Note: Q < Ksp is unsaturated.

Question 1.114. When equal volumes of the following solutions are mixed, the precipitation of AgCl (Ksp = 1.8 × 10-10) will occur with:

(a) 10-4 M (Ag+) and 10-4 M (Cl-) (b) 10-5 M (Ag+) and 10-5 M (Cl-) (c) 10-5 M (Ag+) and 10-6 M (Cl-) (d) 10-10 M (Ag+) and 10-10 M (Cl-)

Solution. Answer: (a) 10-4 M (Ag+) and 10-4 M (Cl-). On mixing equal volumes each concentration halves. (a): 5 × 10-5 each, Q = 2.5 × 10-9 > Ksp: precipitation. (b): Q = 2.5 × 10-11 < Ksp; (c) and (d) are even smaller.

Teacher's Note: Halve concentrations on mixing equal volumes before Q.

Exam Note: Compare Q after dilution with Ksp.

Question 1.115. Choose the correct set of True/False for following statements: (i) Silver chloride is more soluble in very concentrated sodium chloride solution than in pure water. (ii) The pH of a buffer solution does not change on addition of small amount of an acid or a base. (iii) Addition of NH4Cl does not affect the pH of a solution of NH4OH. (iv) Degree of hydrolysis of ammonium acetate does not depend upon the concentration of ammonium acetate solution. (v) A mixture of acetic acid and sodium acetate can act as buffer solution.

(a) TTFTT (b) FTTTF (c) TFTF (d) FFTTT

Solution. Answer: (a) TTFTT. (i) True: in very concentrated Cl-, AgCl dissolves as AgCl2-. (ii) True (changes only negligibly). (iii) False: NH4Cl suppresses ionisation, lowering pH. (iv) True: h = √(Kw/(KaKb)). (v) True. Set: TTFTT.

Teacher's Note: Judge each statement separately; (iii) is the false one.

Exam Note: Common ion lowers pH of NH4OH.

Question 1.116. A 1 litre solution containing NH4Cl and NH4OH has hydroxide ion concentration of 10-6 mol/litre. Which of the following hydroxides could be precipitated when the solution is added to 1 litre solution of 0.1 M metal ions? (I) Ba(OH)2 (Ksp = 5 × 10-3); (II) Ni(OH)2 (Ksp = 1.6 × 10-16); (III) Mn(OH)2 (Ksp = 2 × 10-13); (IV) Fe(OH)2 (Ksp = 8 × 10-16)

(a) I, II, IV (b) IV (c) II and IV (d) II, III, IV

Solution. Answer: (c) II and IV. After mixing equal volumes, [M2+] = 0.05 M and [OH-] = 5 × 10-7 M (taking the buffer as diluted too), so Q = 0.05 × (5 × 10-7)2 = 1.25 × 10-14. Q > Ksp for Ni(OH)2 and Fe(OH)2 (about 10-16) only; Q < Ksp for Ba(OH)2 and Mn(OH)2 (2 × 10-13). Hence II and IV.

Teacher's Note: Compute Q for each hydroxide and compare with its Ksp.

Exam Note: Precipitate if Q exceeds Ksp.

Question 1.117. 150 mL of 0.0008 M ammonium sulphate is mixed with 50 mL of 0.04 M calcium nitrate. The ionic product of CaSO4 will be: (Ksp = 2.4 × 10-5 for CaSO4)

(a) < Ksp (b) > Ksp (c) ≈ Ksp (d) None of these

Solution. Answer: (a) < Ksp. [SO42-] = 0.0008 × 150/200 = 6 × 10-4 M; [Ca2+] = 0.04 × 50/200 = 0.01 M. Q = 6 × 10-6 < 2.4 × 10-5.

Teacher's Note: Dilution after mixing changes both concentrations.

Exam Note: Use final volume 200 mL.

Question 1.118. In a saturated solution of AgCl, NaCl is added gradually. The concentration of Ag+ is plotted against the concentration of Cl-. The graph appears as: [Figure: four graphs of [Ag+] versus [Cl-]: (a) straight falling line, (b) straight rising line, (c) falling hyperbola, (d) horizontal line.]

(a) straight falling line (b) straight rising line (c) falling hyperbola (d) horizontal line

Solution. Answer: (c) falling hyperbola. [Ag+] = Ksp/[Cl-], an inverse relation: a falling curve (rectangular hyperbola), graph (c). (Figure not redrawn; described in words.)

Teacher's Note: Constant Ksp means inverse relation between the ion concentrations.

Exam Note: [Ag+] varies as 1/[Cl-].

Question 1.119. Ksp of AgCl is 1 × 10-10. Its solubility in 0.1 M KNO3 will be:

(a) 10-5 moles/litre (b) > 10-5 moles/litre (c) < 10-5 moles/litre (d) None of these

Solution. Answer: (a) 10-5 moles/litre. KNO3 has no common ion with AgCl, so (taking ideal behaviour) the solubility remains √(10-10) = 10-5 mol/L. (In practice a slight increase from ionic strength is expected; answer as in key.)

Teacher's Note: No common ion means no suppression of solubility.

Exam Note: Ignore inert electrolyte at this level.

Question 1.120. 50 mL of a solution containing 10-3 mole of Ag+ is mixed with 50 mL of a 0.1 M HCl solution. How much Ag+ remains in solution? (Ksp of AgCl = 1.0 × 10-10)

(a) 2.5 × 10-9 (b) 2.5 × 10-7 (c) 2.5 × 10-8 (d) 2.5 × 10-10

Solution. Answer: (a) 2.5 × 10-9. Cl- = 5 × 10-3 mol; Ag+ = 10-3 mol precipitates; excess Cl- = 4 × 10-3 mol in 0.1 L = 0.04 M. [Ag+] = 10-10/0.04 = 2.5 × 10-9 M.

Teacher's Note: Excess chloride fixes [Ag+] through Ksp.

Exam Note: Ksp divided by excess [Cl-].

Question 1.121. The solubility of a sparingly soluble salt AxBy in water is 'S' moles per litre. The solubility product has the value:

(a) S2 (b) xyyx·Sx+y (c) xxyySx+y (d) Sx+y

Solution. Answer: (c) xxyySx+y. [Ay+] = xS and [Bx-] = yS, so Ksp = (xS)x(yS)y = xxyySx+y.

Teacher's Note: Each ion concentration is stoichiometric coefficient times S.

Exam Note: Raise each ion concentration to its coefficient.

Question 1.122. What is the molarity of a saturated solution of CaCO3? (Ksp = 2.8 × 10-9)

(a) 2.6 × 10-5 (b) 2.8 × 10-9 (c) 5.2 × 10-5 (d) 5.6 × 10-9

Solution. Answer: (c) 5.2 × 10-5. S = √Ksp = √(2.8 × 10-9) = 5.3 × 10-5 M, i.e. about 5.2 × 10-5.

Teacher's Note: For 1:1 salt, solubility is square root of Ksp.

Exam Note: S = sqrt(Ksp).

Question 1.123. Ksp of Zr3(PO4)4 in terms of solubility (S) is:

(a) 108 S7 (b) 4S3 (c) 6912 S7 (d) None of these

Solution. Answer: (c) 6912 S7. Ksp = (3S)3(4S)4 = 27 × 256 S7 = 6912 S7.

Teacher's Note: Coefficients 3 and 4 raised to themselves give 27 x 256.

Exam Note: Ksp = 3^3 4^4 S^7.

Question 1.124. The solubility of electrolytes MX1, MX2 and MX3 is 1 × 10-3 moles per litre. Hence their respective solubility products are:

(a) 10-6, 4 × 10-9, 27 × 10-12 (b) 10-9, 4 × 10-9, 32 × 10-12 (c) 10-9, 8 × 10-8, 32 × 10-12 (d) None of these

Solution. Answer: (a) 10-6, 4 × 10-9, 27 × 10-12. MX: Ksp = S2 = 10-6. MX2: 4S3 = 4 × 10-9. MX3: 27S4 = 27 × 10-12.

Teacher's Note: Use S^2, 4S^3, 27S^4 for the three types.

Exam Note: Ksp = x^x y^y S^(x+y).

Question 1.125. A saturated solution of Ca3(PO4)2 has [Ca2+] = 2 × 10-8 M and [PO43-] = 1.6 × 10-5 M. Ksp of Ca3(PO4)2 is:

(a) 3.2 × 10-13 (b) 3.2 × 10-34 (c) 2.048 × 10-33 (d) None of these

Solution. Answer: (c) 2.048 × 10-33. Ksp = [Ca2+]3[PO43-]2 = (2 × 10-8)3(1.6 × 10-5)2 = 8 × 10-24 × 2.56 × 10-10 = 2.048 × 10-33.

Teacher's Note: Raise concentrations to the powers 3 and 2.

Exam Note: Ksp = [Ca]^3 [PO4]^2.

Question 1.126. Which of the following is most soluble in water?

(a) Ba3(PO4)2 (Ksp = 6 × 10-39) (b) ZnS (Ksp = 7 × 10-16) (c) Fe(OH)3 (Ksp = 6 × 10-38) (d) Ag3PO4 (Ksp = 1.8 × 10-18)

Solution. Answer: (d) Ag3PO4 (Ksp = 1.8 × 10-18). Solubilities: Ba3(PO4)2 = (Ksp/108)1/5 ≈ 8.9 × 10-9; ZnS = √Ksp = 2.6 × 10-8; Fe(OH)3 = (Ksp/27)1/4 ≈ 2.2 × 10-10; Ag3PO4 = (Ksp/27)1/4 ≈ 1.6 × 10-5 M. Ag3PO4 is largest.

Teacher's Note: Different salt types cannot be compared by Ksp alone; convert to S.

Exam Note: Compute S, not Ksp, for different types.

Question 1.127. Silver ions are added to a solution with [Br-] = [Cl-] = [CO32-] = [AsO43-] = 0.1 M. Which compound will precipitate with lowest [Ag+]?

(a) AgBr (Ksp = 5 × 10-13) (b) AgCl (Ksp = 1.8 × 10-10) (c) Ag2CO3 (Ksp = 8.1 × 10-12) (d) Ag3AsO4 (Ksp = 1 × 10-22)

Solution. Answer: (a) AgBr (Ksp = 5 × 10-13). [Ag+] needed: AgBr = 5 × 10-12; AgCl = 1.8 × 10-9; Ag2CO3 = √(8.1 × 10-11) = 9 × 10-6; Ag3AsO4 = (10-21)1/3 = 10-7. Lowest is AgBr.

Teacher's Note: Compute the [Ag+] each needs at 0.1 M anion; smallest precipitates first.

Exam Note: Required [Ag+] = (Ksp/[anion]^n)^(1/m).

Question 1.128. The solubility of different sparingly soluble salts are given as under: 1. AB, Ksp = 4.0 × 10-20; 2. A2B, Ksp = 3.2 × 10-11; 3. AB3, Ksp = 2.7 × 10-31. The correct increasing order of solubility is:

(a) 1, 3, 2 (b) 2, 1, 3 (c) 1, 2, 3 (d) 3, 1, 2

Solution. Answer: (a) 1, 3, 2. S(AB) = √(4 × 10-20) = 2 × 10-10; S(A2B) = (3.2 × 10-11/4)1/3 = 2 × 10-4; S(AB3) = (2.7 × 10-31/27)1/4 = 10-8. Increasing order: 1 < 3 < 2.

Teacher's Note: Convert each Ksp to solubility using the correct formula.

Exam Note: Order by S, not Ksp.

Question 1.129. If Ksp for HgSO4 is 6.4 × 10-5, then solubility of this substance in mole per m3 is:

(a) 8 × 10-3 (b) 6.4 × 10-5 (c) 8 × 10-6 (d) None of these

Solution. Answer: (d) None of these. S = √(6.4 × 10-5) = 8 × 10-3 mol/L = 8 mol/m³ (1 m³ = 1000 L), so none of the listed values applies.

Teacher's Note: Remember to convert mol/L into mol/m3 (multiply by 1000).

Exam Note: Unit conversion: 1 mol/L = 1000 mol/m3.

Question 1.130. The solubility of Ba3(AsO4)2 (formula weight = 690) is 6.9 × 10-2 g/100 mL. What is the Ksp?

(a) 1.08 × 10-11 (b) 1.08 × 10-13 (c) 1.0 × 10-15 (d) 6.0 × 10-13

Solution. Answer: (b) 1.08 × 10-13. S = 0.69 g/L ÷ 690 = 10-3 M. Ksp = 108S5 = 108 × 10-15 = 1.08 × 10-13.

Teacher's Note: Convert g per 100 mL to mol per litre first.

Exam Note: Ksp = 108 S^5 for A3B2.

Question 1.131. The solubility of AgBrO3 (formula weight = 236) is 0.0072 g in 1000 mL. What is the Ksp?

(a) 2.2 × 10-8 (b) 3.0 × 10-10 (c) 3.0 × 10-5 (d) 9.3 × 10-10

Solution. Answer: (d) 9.3 × 10-10. S = 0.0072/236 = 3.05 × 10-5 M; Ksp = S2 = 9.3 × 10-10.

Teacher's Note: 1:1 salt: Ksp = S^2 after converting grams.

Exam Note: Divide by molar mass, square.

Question 1.132. The solubility of PbF2 (formula weight = 245) is 0.46 g/L. What is the solubility product?

(a) 1.1 × 10-8 (b) 2.6 × 10-8 (c) 1.1 × 10-7 (d) 6.8 × 10-9

Solution. Answer: (b) 2.6 × 10-8. S = 0.46/245 = 1.88 × 10-3 M; Ksp = 4S3 = 4 × (1.88 × 10-3)3 = 2.65 × 10-8.

Teacher's Note: MX2 type uses Ksp = 4S^3.

Exam Note: Ksp = 4S^3.

Question 1.133. How many grams of MgC2O4 (formula weight = 112) will dissolve in 1.5 L of water? (Ksp = 8.1 × 10-5)

(a) 1.0 (b) 1.29 (c) 1.512 (d) 4.65

Solution. Answer: (c) 1.512. S = √(8.1 × 10-5) = 9 × 10-3 M; moles in 1.5 L = 0.0135; mass = 0.0135 × 112 = 1.512 g.

Teacher's Note: Solubility times volume times molar mass.

Exam Note: Mass = S x V x M.

Question 1.134. What is the molarity of F- ions in a saturated solution of BaF2? (Ksp = 1.0 × 10-6)

(a) 1.0 × 10-2 (b) 1.0 × 10-3 (c) 1.26 × 10-2 (d) 6.3 × 10-3

Solution. Answer: (c) 1.26 × 10-2. Ksp = 4S3, S = (2.5 × 10-7)1/3 = 6.3 × 10-3 M. [F-] = 2S = 1.26 × 10-2 M.

Teacher's Note: Question asks for [F-], which is twice S.

Exam Note: [F-] = 2S.

Question 1.135. What is the molarity of F- in a saturated solution of InF3? (Ksp = 7.9 × 10-10)

(a) 2.3 × 10-3 (b) 8.3 × 10-3 (c) 1.0 × 10-3 (d) 7.0 × 10-3

Solution. Answer: (d) 7.0 × 10-3. Ksp = 27S4, S = (7.9 × 10-10/27)1/4 = 2.3 × 10-3 M. [F-] = 3S = 6.9 × 10-3 ≈ 7.0 × 10-3 M.

Teacher's Note: AB3 type: F- is three times S.

Exam Note: [F-] = 3S.

Question 1.136. What is the pH of a saturated solution of Cu(OH)2? (Ksp = 2.6 × 10-19)

(a) 6.1 (b) 7.30 (c) 8.42 (d) 7.90

Solution. Answer: (d) 7.90. Ksp = 4S3, S = 4.0 × 10-7 M, [OH-] = 8.0 × 10-7; pOH = 6.10, pH = 7.90.

Teacher's Note: Hydroxide is 2S; then convert pOH to pH.

Exam Note: pH = 14 - pOH.

Question 1.137. The solubility product of AgCl is 10-10 M2. The minimum volume (in m3) of water required to dissolve 14.35 mg of AgCl is approximately:

(a) 0.01 (b) 0.1 (c) 100 (d) 10

Solution. Answer: (a) 0.01. S = 10-5 mol/L = 1.435 × 10-3 g/L. 14.35 mg = 0.01435 g needs 0.01435/1.435 × 10-3 = 10 L = 0.01 m³.

Teacher's Note: Dissolvable mass per litre decides the volume.

Exam Note: Convert litres to cubic metres.

Question 1.138. What is the molar solubility of Fe(OH)2 (Ksp = 8.0 × 10-16) at pH 13.0?

(a) 8.0 × 10-18 (b) 8.0 × 10-15 (c) 8.0 × 10-17 (d) 8.0 × 10-14

Solution. Answer: (d) 8.0 × 10-14. pH 13 gives [OH-] = 0.1 M; S = Ksp/[OH-]2 = 8.0 × 10-16/10-2 = 8.0 × 10-14 M.

Teacher's Note: Fixed [OH-] from pH replaces the 2S term.

Exam Note: S = Ksp/[OH-]^2.

Question 1.139. What is the minimum pH necessary to cause a precipitate of Pb(OH)2 (Ksp = 1.2 × 10-5) to form in a 0.12 M PbCl2 solution?

(a) 12.4 (b) 10.8 (c) 12.0 (d) 11.1

Solution. Answer: (c) 12.0. [OH-]2 = Ksp/[Pb2+] = 1.2 × 10-5/0.12 = 10-4, [OH-] = 10-2, pOH = 2, pH = 12.0. (Ksp as printed in the book.)

Teacher's Note: Precipitation begins when Q equals Ksp.

Exam Note: [OH-] = sqrt(Ksp/[Pb2+]).

Question 1.140. Which of the following would increase the solubility of Pb(OH)2:

(a) Add hydrochloric acid (b) Add a solution of Pb(NO3)2 (c) Add a solution of NaOH (d) None of the above

Solution. Answer: (a) Add hydrochloric acid. HCl removes OH- (H+ + OH- → H2O), shifting the equilibrium to dissolve more Pb(OH)2. Pb(NO3)2 adds a common ion and decreases solubility.

Teacher's Note: Acid consumes OH-, pulling the dissolution equilibrium forward.

Exam Note: Removing an ion raises solubility.

Question 1.141. What is the molar solubility of Ag2CO3 (Ksp = 4 × 10-13) in 0.1 M Na2CO3 solution?

(a) 10-6 (b) 10-7 (c) 2 × 10-6 (d) 2 × 10-7

Solution. Answer: (a) 10-6. [Ag+] = √(Ksp/[CO32-]) = √(4 × 10-13/0.1) = 2 × 10-6 M. Solubility S = [Ag+]/2 = 10-6 M.

Teacher's Note: Solubility is half of [Ag+] because each unit gives two Ag+.

Exam Note: S = [Ag+]/2.

Question 1.142. What is the concentration of Pb2+ when PbSO4 (Ksp = 1.8 × 10-8) begins to precipitate from a solution that is 0.0045 M in SO42-?

(a) 4.0 × 10-8 M (b) 1.0 × 10-6 M (c) 2.0 × 10-8 M (d) 4.0 × 10-6 M

Solution. Answer: (d) 4.0 × 10-6 M. [Pb2+] = Ksp/[SO42-] = 1.8 × 10-8/4.5 × 10-3 = 4.0 × 10-6 M.

Teacher's Note: Precipitation starts when Q equals Ksp.

Exam Note: Divide Ksp by the anion concentration.

Question 1.143. What is the concentration of Ba2+ when BaF2 (Ksp = 1.0 × 10-6) begins to precipitate from a solution that is 0.30 M F-?

(a) 9.0 × 10-7 (b) 3.3 × 10-5 (c) 1.1 × 10-5 (d) 3.0 × 10-7

Solution. Answer: (c) 1.1 × 10-5. [Ba2+] = Ksp/[F-]2 = 10-6/0.09 = 1.1 × 10-5 M.

Teacher's Note: Square the fluoride concentration.

Exam Note: Ksp over [F-] squared.

Question 1.144. Solubility of AgCl in 0.2 M NaCl is x and that in 0.1 M AgNO3 is y then which of the following is correct?

(a) x = y (b) x > y (c) x < y (d) We cannot predict

Solution. Answer: (c) x < y. x = Ksp/0.2 and y = Ksp/0.1, so x is half of y: x < y.

Teacher's Note: Higher common-ion concentration suppresses solubility more.

Exam Note: More common ion, lower solubility.

Question 1.145. What is the molarity of Fe(CN)64- in a saturated solution of Ag4[Fe(CN)6]? (Ksp = 1.6 × 10-41)

(a) 1.6 × 10-8 (b) 5.2 × 10-8 (c) 2.0 × 10-8 (d) 2.3 × 10-9

Solution. Answer: (d) 2.3 × 10-9. Ksp = (4S)4(S) = 256S5; S = (1.6 × 10-41/256)1/5 = (6.25 × 10-44)1/5 = 2.3 × 10-9 M.

Teacher's Note: Ag4[Fe(CN)6] gives four Ag+ and one complex ion.

Exam Note: Ksp = 256 S^5.

Question 1.146. At 25°C, Ksp for PbBr2 is equal to 8 × 10-5. If the salt is 80% dissociated, what is the solubility of PbBr2 in mol/litre?

(a) [10-4/(1.6 × 1.6)]1/3 (b) [10-5/(1.6 × 1.6)]1/3 (c) [10-4/(0.8 × 0.8)]1/3 (d) [10-5/(1.6 × 1.6)]1/2

Solution. Answer: (a) [10-4/(1.6 × 1.6)]1/3. With 80% dissociation: [Pb2+] = 0.8S, [Br-] = 1.6S. Ksp = 0.8S × (1.6S)2, so S3 = 8 × 10-5/(0.8 × 1.6 × 1.6) = 10-4/(1.6 × 1.6), S = [10-4/(1.6 × 1.6)]1/3.

Teacher's Note: Only 80 percent of dissolved salt appears as ions.

Exam Note: Scale each ion by 0.8 times stoichiometry.

Question 1.147. What is the molar solubility of Mn(OH)2 (Ksp = 4.5 × 10-14) in a buffer solution containing equal amounts of NH4+ and NH3 (Kb = 1.8 × 10-5)?

(a) 3.0 × 10-4 (b) 1.38 × 10-4 (c) 1.38 × 10-3 (d) 7.3 × 10-4

Solution. Answer: (b) 1.38 × 10-4. Equal NH4+ and NH3 means [OH-] = Kb = 1.8 × 10-5. S = Ksp/[OH-]2 = 4.5 × 10-14/(3.24 × 10-10) = 1.39 × 10-4 M.

Teacher's Note: Buffer fixes [OH-] at Kb.

Exam Note: S = Ksp/Kb^2.

Question 1.148. Find moles of NH4Cl required to prevent Mg(OH)2 from precipitating in a litre of solution which contains 0.02 mole of NH3 and 0.001 mole of Mg2+ ions. Given: Kb(NH3) = 10-5; Ksp[Mg(OH)2] = 10-11

(a) 10-4 (b) 2 × 10-3 (c) 0.02 (d) 0.1

Solution. Answer: (b) 2 × 10-3. Maximum [OH-] = √(10-11/10-3) = 10-4 M. [NH4+] = Kb[NH3]/[OH-] = 10-5 × 0.02/10-4 = 2 × 10-3 mol.

Teacher's Note: Find the largest tolerable [OH-], then the NH4+ needed to hold it.

Exam Note: Common ion suppresses [OH-].

Question 1.149. What mass of AgI will dissolve in 1.0 L of 1.0 M NH3? Neglect change in conc. of NH3. [Given: Ksp(AgI) = 1.5 × 10-16; Kf[Ag(NH3)2+] = 1.6 × 107; (At. wt. Ag = 108; I = 127)]

(a) 4.9 × 10-5 g (b) 0.0056 g (c) 0.035 g (d) 0.011 g

Solution. Answer: (d) 0.011 g. AgI + 2NH3 ⇌ Ag(NH3)2+ + I-, K = KspKf = 2.4 × 10-9. S2/(1)2 = 2.4 × 10-9, S = 4.9 × 10-5 M. Mass = 4.9 × 10-5 × 235 = 0.0115 g ≈ 0.011 g.

Teacher's Note: Overall constant is Ksp times Kf; then convert moles to grams.

Exam Note: K = Ksp x Kf; mass = S x 235.

Question 1.150. Consider the following statement and select correct option: (I) Ksp of Fe(OH)3 in aqueous solution is 3.8 × 10-38 at 298 K. The concentration of Fe3+ will increase when [H+] ion concentration decreases. (II) In a mixture of NH4Cl and NH4OH in water, a further amount of NH4Cl is added. The pH of the mixture will decrease. (III) An aqueous solution of each of the following salts (NH4I, HCOOK) will be basic, acidic, respectively.

(a) only I is correct (b) only II is correct (c) only III is correct (d) II and III are correct

Solution. Answer: (b) only II is correct. (I) False: lower [H+] means more OH-, so Fe3+ decreases. (II) True: more NH4+ suppresses ionisation of NH4OH, lowering [OH-] and pH. (III) False: NH4I is acidic and HCOOK basic (reverse). Only II is correct.

Teacher's Note: Check each: Ksp relation, common ion on NH4OH, salt type.

Exam Note: Judge each statement independently.

Level 2

Question 2.1. Equilibrium constants of T2O (T or ₁H³ is an isotope of ₁H¹) and H2O are different at 298 K. Let at 298 K pure water T2O has pT (like pH) is 7.62. The pT of a solution prepared by adding 10 mL of 0.2 M TCl to 15 mL of 0.25 M NaOT is:

(a) 2 - log 7 (b) 14 + log 7 (c) 13.24 - log 7 (d) 13.24 + log 7

Solution. Answer: (d) 13.24 + log 7. Neutral pT = 7.62, so pKw(T2O) = 15.24. TCl = 2 mmol, NaOT = 3.75 mmol; excess OT- = 1.75 mmol in 25 mL = 0.07 M, pOT = 2 - log 7. pT = 15.24 - (2 - log 7) = 13.24 + log 7.

Teacher's Note: Neutral pT gives pKw of the isotopic water; then treat like pH.

Exam Note: pT = 2 x 7.62 - pOT.

Question 2.2. Liquid NH3 ionises to a slight extent. At a certain temp. its self ionization constant KSIC(NH_{3)} = 10-30. The number of NH4+ ions are present per 100 cm³ of pure liquid are:

(a) 10-15 (b) 6.022 × 108 (c) 6.022 × 107 (d) 6.022 × 106

Solution. Answer: (c) 6.022 × 107. 2NH3 ⇌ NH4+ + NH2-; [NH4+] = √(10-30) = 10-15 mol/L. In 0.1 L: 10-16 mol = 10-16 × 6.022 × 1023 = 6.022 × 107 ions.

Teacher's Note: Self-ionisation gives equal ion concentrations; scale to 0.1 L.

Exam Note: Moles times Avogadro number.

Question 2.3. To what volume of 10 litre of 0.5 M CH3COOH (Ka = 1.8 × 10-5) be diluted in order to double the hydroxide ion concentration?

(a) 20 L (b) 30 L (c) 40 L (d) None of these

Solution. Answer: (c) 40 L. Doubling [OH-] halves [H+] = √(KaC), so C must fall to one-fourth: 0.125 M. V = 0.5 × 10/0.125 = 40 L (final volume).

Teacher's Note: Hydroxide doubles means hydrogen ion halves, so concentration quarters.

Exam Note: Final volume 40 L, so add 30 L.

Question 2.4. 20 mL of 0.1 M weak acid HA (Ka = 10-5) is mixed with solution of 10 mL of 0.3 M HCl and 10 mL of 0.1 M NaOH. Find the value of [A-]/([HA] + [A-]) in the resulting solution:

(a) 2 × 10-4 (b) 2 × 10-5 (c) 2 × 10-3 (d) 0.05

Solution. Answer: (a) 2 × 10-4. HCl 3 mmol - NaOH 1 mmol = 2 mmol HCl left in 40 mL, [H+] = 0.05 M. Fraction ionised = Ka/(Ka + [H+]) ≈ 10-5/0.05 = 2 × 10-4.

Teacher's Note: Strong acid suppresses HA ionisation; use Ka/[H+].

Exam Note: Fraction ionised = Ka/(Ka + [H+]).

Question 2.5. What concentration of FCH2COOH (Ka = 2.6 × 10-3) is needed so that [H+] = 2 × 10-3?

(a) 2 × 10-3 M (b) 2.6 × 10-3 M (c) 5.2 × 10-3 M (d) 3.53 × 10-3 M

Solution. Answer: (d) 3.53 × 10-3 M. Ka = [H+]2/(C - [H+]): C - 2 × 10-3 = 4 × 10-6/2.6 × 10-3 = 1.54 × 10-3, so C = 3.54 × 10-3 M.

Teacher's Note: Do not ignore ionised portion; add [H+] back to equilibrium acid.

Exam Note: C = [H+]^2/Ka + [H+].

Question 2.6. Calculate the ratio of HCOO- and F- in a mixture of 0.2 M HCOOH (Ka = 2 × 10-4) and 0.1 M HF (Ka = 6.6 × 10-4):

(a) 1 : 6.6 (b) 1 : 3.3 (c) 2 : 3.3 (d) 3.3 : 2

Solution. Answer: (c) 2 : 3.3. Both ions share the same [H+]: [A-] = KaC/[H+]. Ratio = (2 × 10-4 × 0.2)/(6.6 × 10-4 × 0.1) = 4 × 10-5/6.6 × 10-5 = 2 : 3.3.

Teacher's Note: Common [H+] cancels in the ratio of anion concentrations.

Exam Note: Ratio = Ka1C1 : Ka2C2.

Question 2.7. If first dissociation of X(OH)3 is 100% where as second dissociation is 50% and third dissociation is negligible then the pH of 4 × 10-3 M X(OH)3 is:

(a) 11.78 (b) 10.78 (c) 2.5 (d) 2.22

Solution. Answer: (a) 11.78. [OH-] = 4 × 10-3 (first) + 0.5 × 4 × 10-3 (second) = 6 × 10-3 M. pOH = 2.22, pH = 11.78.

Teacher's Note: Add OH- from each stage before taking the log.

Exam Note: pOH = -log(6e-3).

Question 2.8. H3A is a weak triprotic acid (Ka1 = 10-5, Ka2 = 10-9, Ka3 = 10-13). What is the value of pX of 0.1 M H3A(aq.) solution? where pX = -log X and X = [A3-]/[HA2-]

(a) 7 (b) 8 (c) 9 (d) 10

Solution. Answer: (d) 10. [H+] = √(10-5 × 0.1) = 10-3 M. X = [A3-]/[HA2-] = Ka3/[H+] = 10-13/10-3 = 10-10, so pX = 10.

Teacher's Note: Ratio of successive species equals Ka divided by [H+].

Exam Note: X = Ka3/[H+].

Question 2.9. Calcium lactate is a salt of weak organic acid and strong base represented as Ca(LaC)2. A saturated solution of Ca(LaC)2 contains 0.6 mole in 2 litre solution. If pOH of solution is 5.60. If 90% dissociation of the salt takes place then what is pKa of lactic acid?

(a) 2.8 - log(0.54) (b) 2.8 + log(0.54) (c) 2.8 - log(0.27) (d) None of these

Solution. Answer: (a) 2.8 - log(0.54). [LaC-] = 2 × 0.3 × 0.9 = 0.54 M; [OH-] = 10-5.6 = 2.51 × 10-6. Kh = [OH-]2/0.54 = 1.17 × 10-11; Ka = 10-14/1.17 × 10-11 = 8.6 × 10-4; pKa = 3.07 = 2.8 - log 0.54 (since -log 0.54 = 0.27).

Teacher's Note: Anion concentration needs both 2 anions per salt and 90 percent dissociation.

Exam Note: Find [LaC-] first, then Kh, then Ka.

Question 2.10. What is the concentration of CH3COOH(aq.) in a solution prepared by dissolving 0.01 mole of NH4CH3COO in 1 L H2O? [Ka(CH_{3COOH)} = 1.8 × 10-5; Kb(NH_{4OH)} = 1.8 × 10-5]

(a) 5.55 × 10-5 (b) 0.10 (c) 6.4 × 10-4 (d) 5.55 × 10-3

Solution. Answer: (a) 5.55 × 10-5. h = √(Kw/(KaKb)) = 5.55 × 10-3. [CH3COOH] = h × C = 5.55 × 10-3 × 0.01 = 5.55 × 10-5 M.

Teacher's Note: Hydrolysed fraction times total salt gives acid formed.

Exam Note: [acid] = h x C.

Question 2.11. Ka for the reaction: Fe3+(aq.) + H2O(l) ⇌ Fe(OH)2+(aq.) + H3O+(aq.) is 6.5 × 10-3. What is the max. pH value which could be used so that at least 80% of the total iron (III) in a dilute solution exists as Fe3+?

(a) 2 (b) 2.41 (c) 2.79 (d) 1.59

Solution. Answer: (d) 1.59. [Fe3+]/[Fe(OH)2+] = [H+]/Ka ≥ 80/20 = 4, so [H+] ≥ 4 × 6.5 × 10-3 = 2.6 × 10-2 and pH ≤ 1.59.

Teacher's Note: 80 percent Fe3+ means ratio four; higher [H+] needed.

Exam Note: Maximum pH is minimum [H+] condition.

Question 2.12. Fe(OH)2 is diacidic base has Kb1 = 10-4 and Kb2 = 2.5 × 10-6. What is the concentration of Fe(OH)2 in 0.1 M Fe(NO3)2 solution?

(a) 4 × 10-9 (b) 2.5 × 10-6 (c) 10-10 (d) 10-14

Solution. Answer: (c) 10-10. First hydrolysis Fe2+ + H2O ⇌ Fe(OH)+ + H+: K = Kw/Kb2 = 4 × 10-9; [H+] = √(4 × 10-9 × 0.1) = 2 × 10-5. Second step: Fe(OH)+ + H2O ⇌ Fe(OH)2 + H+, K = Kw/Kb1 = 10-10; [Fe(OH)2] = K[Fe(OH)+]/[H+] = 10-10 × 2 × 10-5/2 × 10-5 = 10-10 M.

Teacher's Note: Second hydrolysis constant is Kw/Kb1; [Fe(OH)+] equals [H+].

Exam Note: Fe(OH)2 equals Kw/Kb1 when [Fe(OH)+] = [H+].

Question 2.13. How many gm of solid KOH must be added to 100 mL of a buffer solution which is 0.1 M each w.r.t. acid HA and salt KA to make the pH of solution 6.0. [Given: pKa(HA) = 5]

(a) 0.458 (b) 0.327 (c) 5.19 (d) None of these

Solution. Answer: (a) 0.458. Initial HA = KA = 0.01 mol. After adding x mol KOH: pH = 5 + log((0.01 + x)/(0.01 - x)) = 6, so (0.01 + x) = 10(0.01 - x), x = 0.00818 mol. Mass = 0.00818 × 56 = 0.458 g.

Teacher's Note: KOH converts HA into A-; ratio must become 10.

Exam Note: Use Henderson with changed moles.

Question 2.14. Fixed volume of 0.1 M benzoic acid (pKa = 4.2) solution is added into 0.2 M sodium benzoate and formed 300 mL, resultant acidic buffer solution. If pH of this buffer solution is 4.5 then find added volume of benzoic acid:

(a) 100 mL (b) 150 mL (c) 200 mL (d) None of these

Solution. Answer: (b) 150 mL. Let benzoic acid volume = V mL; benzoate volume = 300 - V. pH = 4.2 + log(0.2(300 - V)/(0.1V)) = 4.5, so 2(300 - V)/V = 2, V = 150 mL.

Teacher's Note: Moles of acid and salt depend on volumes; set ratio from pH.

Exam Note: Henderson ratio = 2 gives V = 150.

Question 2.15. A 1.025 g sample containing a weak acid HX (mol. wt. = 82) is dissolved in 60 mL water and titrated with 0.25 M NaOH. When half of the acid was neutralised the pH was found to be 5.0 and at the equivalence point the pH is 9.0. Calculate weight percentage of HX in sample:

(a) 50% (b) 75% (c) 80% (d) None of these

Solution. Answer: (c) 80%. Half neutralised: pKa = 5. At equivalence [OH-] = 10-5 = √(KhC), Kh = 10-9, so C = 0.1 M. With V mL NaOH: 0.25V/(V + 60) = 0.1, V = 40 mL; HX = 0.01 mol = 0.82 g. Percent = 0.82/1.025 × 100 = 80%.

Teacher's Note: Equivalence pH gives salt concentration, which gives NaOH volume.

Exam Note: Use total volume V + 60 mL.

Question 2.16. Which of the following expression for % ionization of a monoacidic base (BOH) in aqueous solution at appreciable concentration is not correct?

(a) 100 × √(Kb/C) (b) 1/(1 + 10(pKb - pOH)) (c) Kw[H+]/(Kb + Kw) (d) Kb/(Kb + [OH-])

Solution. Answer: (c) Kw[H+]/(Kb + Kw). The exact degree of ionisation is α = Kb/(Kb + [OH-]) = 1/(1 + 10(pKb - pOH)), and for small α, 100 × √(Kb/C) as a percent. The expression in (c) has no basis, so it is the incorrect one. (Options as printed in the book; the first and second omit or include the factor of 100 loosely.)

Teacher's Note: Check each against Kb = [B+][OH-]/[BOH]; (c) cannot be derived.

Exam Note: Exact: α = Kb/(Kb + [OH-]).

Question 2.17. A solution of weak acid HA was titrated with base NaOH. The equivalent point was reached when 40 mL of 0.1 M NaOH has been added. Now 20 mL of 0.1 M HCl were added to titrated solution, the pH was found to be 5.0. What will be the pH of solution obtained by mixing 20 mL of 0.2 M NaOH and 20 mL 0.2 M HA?

(a) 7 (b) 9 (c) 11 (d) None of these

Solution. Answer: (b) 9. At equivalence A- = 4 mmol; HCl (2 mmol) gives HA = 2, A- = 2, so pH = pKa = 5. New mixture: 4 mmol NaOH + 4 mmol HA gives 4 mmol A- in 40 mL = 0.1 M. Kh = 10-9; [OH-] = √(10-9 × 0.1) = 10-5; pOH = 5, pH = 9.

Teacher's Note: Half-neutralised state gives pKa; then compute the salt pH.

Exam Note: pH = 7 + (pKa + log C)/2.

Question 2.18. A buffer solution 0.04 M in Na2HPO4 and 0.02 M in Na3PO4 is prepared. The electrolytic oxidation of 1.0 milli-mole of the organic compound RNHOH is carried out in 100 mL of the buffer. The reaction is RNHOH + H2O → RNO2 + 4H+ + 4e-. The approximate pH of solution after the oxidation is complete is: [Given: for H3PO4: pKa1 = 2.2; pKa2 = 7.20; pKa3 = 12]

(a) 6.90 (b) 7.20 (c) 7.5 (d) None of these

Solution. Answer: (c) 7.5. Buffer contains HPO42- = 4 mmol, PO43- = 2 mmol. 4 mmol H+ is produced: 2 mmol converts PO43- to HPO42- (now 6 mmol), the remaining 2 mmol converts HPO42- to H2PO4- (HPO42- = 4, H2PO4- = 2). pH = 7.20 + log(4/2) = 7.50.

Teacher's Note: Neutralise the stronger base first; recount buffer pair.

Exam Note: H+ reacts with PO4 3- first.

Question 2.19. When a 20 mL of 0.08 M weak base BOH is titrated with 0.08 HCl, the pH of the solution at the end point is 5. What will be the pOH if 10 mL of 0.04 M NaOH is added to the resulting solution? [Given: log 2 = 0.30 and log 3 = 0.48]

(a) 5.40 (b) 5.88 (c) 4.92 (d) None of these

Solution. Answer: (b) 5.88. End point: BCl = 1.6 mmol in 40 mL = 0.04 M; [H+] = 10-5 = √(Kh × 0.04), Kh = 2.5 × 10-9, Kb = 4 × 10-6, pKb = 5.4. NaOH 0.4 mmol converts BCl into BOH: BOH = 0.4, BCl = 1.2 mmol. pOH = 5.4 + log(1.2/0.4) = 5.4 + 0.48 = 5.88.

Teacher's Note: Endpoint pH gives Kh, hence Kb; then basic buffer.

Exam Note: Basic buffer: pOH = pKb + log(salt/base).

Question 2.20. Calculate approximate pH of the resultant solution formed by titration of 25 mL of 0.04 M Na2CO3 with 50 mL of 0.025 M HCl. [Given: pKa1 = 6.4 and pKa2 = 10.3 for H2CO3]

(a) 5.92 (b) 6.88 (c) 6.4 (d) 5.88

Solution. Answer: (b) 6.88. Na2CO3 = 1.0 mmol; HCl = 1.25 mmol. 1.0 mmol gives HCO3- = 1.0, then 0.25 mmol more converts to H2CO3 = 0.25, HCO3- = 0.75. pH = 6.4 + log(0.75/0.25) = 6.4 + 0.48 = 6.88.

Teacher's Note: Past first equivalence the pair is HCO3-/H2CO3 using pKa1.

Exam Note: Compare HCl moles with the 1x and 2x thresholds.

Question 2.21. In the titration of a solution of a weak acid HA and NaOH, the pH is 5.0 after 10 mL of NaOH solution has been added and 5.60 after 20 mL NaOH has been added. What is the value of pKa for HA?

(a) 5.15 (b) 5.3 (c) 5.6 (d) None of these

Solution. Answer: (b) 5.3. Let total acid correspond to a mL of NaOH. pH = pKa + log(V/(a - V)). Subtracting: 0.6 = log[2(a - 10)/(a - 20)], so 3.98 = 2(a - 10)/(a - 20), giving a = 30 mL. pKa = 5.0 - log(10/20) = 5.0 + 0.30 = 5.3.

Teacher's Note: Two data points give the unknown equivalence volume; then Henderson.

Exam Note: Solve for total acid, then pKa.

Question 2.22. 50 mL of 0.05 M Na2CO3 is titrated against 0.1 M HCl. On adding 40 mL of HCl, pH of the solution will be: [Given: for H2CO3 pKa1 = 6.35, pKa2 = 10.33; log 3 = 0.477, log 2 = 0.30]

(a) 6.35 (b) 6.526 (c) 8.34 (d) 6.173

Solution. Answer: (d) 6.173. Na2CO3 = 2.5 mmol; HCl = 4 mmol. First 2.5 mmol gives HCO3- = 2.5; extra 1.5 mmol gives H2CO3 = 1.5, HCO3- = 1.0. pH = 6.35 + log(1.0/1.5) = 6.35 - 0.176 = 6.174.

Teacher's Note: After first equivalence use pKa1 with HCO3-/H2CO3.

Exam Note: Check which buffer pair applies.

Question 2.23. 10 mL of tribasic acid H3A is titrated with 0.1 M NaOH solution. What is the ratio of [H3A]/[A3-] at 2nd equivalence point? [Given: Ka1 = 10-3, Ka2 = 10-8, Ka3 = 10-12]

(a) ≈ 10-4 (b) ≈ 10+4 (c) ≈ 10-7 (d) ≈ 10+6

Solution. Answer: (c) ≈ 10-7. At the second equivalence point the solution is HA2- with [H+] = √(Ka2Ka3) = 10-10. [H3A]/[A3-] = [H+]3/(Ka1Ka2Ka3) = 10-30/10-23 = 10-7.

Teacher's Note: Amphiprotic stage fixes [H+]; chain the three equilibria.

Exam Note: Ratio = [H+]^3/(K1K2K3).

Question 2.24. A3B2 is a sparingly soluble salt of molar mass M (g mol-1) and solubility x g litre-1. The ratio of the molar concentration of B3- to the solubility product of the salt is:

(a) 108 x5/M5 (b) M4/(108 x4) (c) M4/(54 x4) (d) None of these

Solution. Answer: (c) M4/(54 x4). S = x/M; [B3-] = 2S; Ksp = (3S)3(2S)2 = 108S5. Ratio = 2S/108S5 = 1/(54S4) = M4/(54x4).

Teacher's Note: Convert solubility from g/L to mol/L before forming Ksp.

Exam Note: Ratio = 2S/(108 S^5).

Question 2.25. A solution is 0.10 M Ba(NO3)2 and 0.10 M Sr(NO3)2. If solid Na2CrO4 is added to the solution, what is [Ba2+] when SrCrO4 begins to precipitate? [Ksp(BaCrO4) = 1.2 × 10-10; Ksp(SrCrO4) = 3.5 × 10-5]

(a) 7.4 × 10-7 (b) 2.0 × 10-7 (c) 6.1 × 10-7 (d) 3.4 × 10-7

Solution. Answer: (d) 3.4 × 10-7. SrCrO4 begins when [CrO42-] = 3.5 × 10-5/0.1 = 3.5 × 10-4 M. Then [Ba2+] = 1.2 × 10-10/3.5 × 10-4 = 3.4 × 10-7 M.

Teacher's Note: Find chromate at which the second salt starts, then use the first Ksp.

Exam Note: BaCrO4 precipitates earlier, lowering [Ba2+].

Question 2.26. A solution is 0.01 M KI and 0.1 M KCl. If solid AgNO3 is added to the solution, what is the [I-] when AgCl begins to precipitate? [Ksp(AgI) = 1.5 × 10-16; Ksp(AgCl) = 1.8 × 10-10]

(a) 3.5 × 10-7 (b) 6.1 × 10-8 (c) 2.2 × 10-7 (d) 8.3 × 10-8

Solution. Answer: (d) 8.3 × 10-8. AgCl begins at [Ag+] = 1.8 × 10-10/0.1 = 1.8 × 10-9. Then [I-] = 1.5 × 10-16/1.8 × 10-9 = 8.3 × 10-8 M.

Teacher's Note: Use AgCl's threshold [Ag+] to find remaining iodide.

Exam Note: I- left = Ksp(AgI)/[Ag+].

Question 2.27. A solution of 0.1 M in Cl- and 10-4 M CrO42-. If solid AgNO3 is gradually added to this solution, what will be the concentration of Cl- when Ag2CrO4 begins to precipitate? [Ksp(AgCl) = 10-10 M²; Ksp(Ag2CrO4) = 10-12 M³]

(a) 10-6 M (b) 10-4 M (c) 10-5 M (d) 10-9 M

Solution. Answer: (a) 10-6 M. Ag2CrO4 begins at [Ag+] = √(10-12/10-4) = 10-4 M. Chloride remaining = 10-10/10-4 = 10-6 M.

Teacher's Note: AgCl precipitates first; find chloride left when chromate salt starts.

Exam Note: Ag+ at start of second precipitate fixes Cl-.

Question 2.28. If 500 mL of 0.4 M AgNO3 is mixed with 500 mL of 2 M NH3 solution then what is the concentration of Ag(NH3)+ in solution? Given: Kf1[Ag(NH3)+] = 103; Kf2[Ag(NH3)2+] = 104

(a) 3.33 × 10-7 (b) 3.33 × 10-5 M (c) 3 × 10-4 M (d) 10-7 M

Solution. Answer: (b) 3.33 × 10-5 M. After mixing, [Ag+] = 0.2 M, [NH3] = 1 M. Ag+ is converted almost entirely to Ag(NH3)2+ (0.2 M), using 0.4 M NH3, leaving about 0.6 M NH3. For Ag(NH3)2+ ⇌ Ag(NH3)+ + NH3: (1/Kf2) = y × 0.6/0.2 = 10-4, so y = 3.33 × 10-5 M.

Teacher's Note: Complex forms stepwise; the 2:1 complex dominates, then back-calculate the 1:1 complex.

Exam Note: Use reverse of Kf2 with leftover NH3.

Question 2.29. The simultaneous solubility of AgCN (Ksp = 2.5 × 10-16) and AgCl (Ksp = 1.6 × 10-10) in 1.0 M NH3(aq.) are respectively: [Given: Kf [Ag(NH3)2+] = 107]

(a) 0.037, 5.78 × 10-8 (b) 5.78 × 10-8, 0.037 (c) 0.04, 6.25 × 10-8 (d) 1.58 × 10-3, 1.26 × 10-5

Solution. Answer: (b) 5.78 × 10-8, 0.037. AgCl + 2NH3 ⇌ Ag(NH3)2+ + Cl-: K1 = 1.6 × 10-3; AgCN: K2 = 2.5 × 10-9. [Cl-]/[CN-] = 6.4 × 105. Both share [Ag(NH3)2+] = [Cl-] + [CN-] ≈ x, so x²/(1 - 2x)² = 1.6 × 10-3 gives x/(1 - 2x) = 0.04, x = 0.037 M = [Cl-], and [CN-] = 0.037/6.4 × 105 = 5.78 × 10-8 M. Solubility of AgCN = 5.78 × 10-8, AgCl = 0.037 M. Corrected: the book key gives (a), but in the order asked (AgCN, AgCl) the values are 5.78 × 10-8 and 0.037, which is (b).

Teacher's Note: Both salts share one complex ion; the much more soluble AgCl dominates.

Exam Note: Read order asked: AgCN first.

Question 2.30. There exist an equilibrium between solid SrSO4 and Sr2+ and SO42- ion in aqueous medium. The possible equilibrium states are shown in figure as thick line. Now, if equilibrium is disturbed by addition of (a) Sr(NO3)2 and (b) K2SO4 and dotted line represent approach of system towards equilibrium. Match the columns given below. [Figure: four plots (iii) to (vi) of [Sr2+] against [SO4 2-] showing the hyperbolic Ksp curve with dotted arrows approaching it from different directions; not redrawn.] (I) addition of Sr(NO3)2; (II) addition of K2SO4.

(a) (I) (iii), (II) (iv) (b) (I) (iv), (II) (v) (c) (I) (vi), (II) (v) (d) (I) (iv), (II) (vi)

Solution. Answer: (b) (I) (iv), (II) (v). Answer from key: (b), (I) matches (iv) and (II) matches (v). Reasoning: adding Sr(NO3)2 raises [Sr2+] only (vertical jump up) and the system returns along a path with SO42- falling; adding K2SO4 raises [SO42-] only (horizontal jump) and [Sr2+] falls back to the curve. (Figure not redrawn; matching taken from the book key and flagged for human check.)

Teacher's Note: Each addition shifts one ion only, then precipitation restores the Ksp curve.

Exam Note: Match jump direction to the ion added.

Question 2.31. Solubility of AgCN is maximum in:

(a) acidic buffer solution (b) basic buffer solution (c) pure water (d) equal in all solution

Solution. Answer: (a) acidic buffer solution. In an acidic buffer CN- is protonated to HCN (weak acid), lowering [CN-] and shifting AgCN ⇌ Ag+ + CN- to the right, so solubility is maximum there.

Teacher's Note: Anion of a weak acid dissolves more in acid.

Exam Note: H+ removes CN-, raising solubility.

Question 2.32. AgBr(s) + 2S2O32-(aq.) ⇌ Ag(S2O3)23-(aq.) + Br-(aq.) [Using: Ksp(AgBr) = 5 × 10-13; Kf(Ag(S2O3)23-) = 5 × 1013]. What is the molar solubility of AgBr in 0.1 M Na2S2O3?

(a) 0.5 M (b) 0.45 M (c) 0.045 M (d) None of these

Solution. Answer: (c) 0.045 M. K = KspKf = 25 = x²/(0.1 - 2x)², so x/(0.1 - 2x) = 5, x = 0.5 - 10x, x = 0.0455 ≈ 0.045 M.

Teacher's Note: Overall constant is Ksp times Kf; each AgBr uses two thiosulfate.

Exam Note: K = Ksp x Kf; take the square root.

Question 2.33. What is [Ag+] in a solution made by dissolving both Ag2CrO4 and Ag2C2O4 until saturation is reached with respect to both salts? [Ksp(Ag2C2O4) = 2 × 10-11, Ksp(Ag2CrO4) = 2 × 10-12]

(a) 2.80 × 10-4 (b) 7.6 × 10-5 (c) 6.63 × 10-6 (d) 3.52 × 10-4

Solution. Answer: (d) 3.52 × 10-4. Let [CrO42-] = x, [C2O42-] = y. Ratio Ksp(Ag2C2O4)/Ksp(Ag2CrO4) = y/x = 10. [Ag+] = 2x + 2y, so Ksp(Ag2C2O4) = (2x + 2y)²y with x = 0.1y: 2 × 10-11 = (2.2y)²y = 4.84y³, y = 1.6 × 10-4, x = 1.6 × 10-5. [Ag+] = 2(x + y) = 2(1.76 × 10-4) = 3.52 × 10-4 M.

Teacher's Note: Both salts share Ag+; total Ag+ comes from both anions.

Exam Note: [Ag+] = 2([CrO4] + [C2O4]).

Question 2.34. What is the minimum pH required to prevent the precipitation of ZnS in a solution that is 0.01 M ZnCl2 and saturated with 0.10 M H2S? [Given: Ksp = 10-21, Ka1 × Ka2 = 10-20]

(a) 0 (b) 1 (c) 2 (d) 4

Solution. Answer: (b) 1. Maximum [S2-] = Ksp/[Zn2+] = 10-21/0.01 = 10-19 M. [S2-] = Ka1Ka2[H2S]/[H+]2: [H+]² = 10-20 × 0.1/10-19 = 10-2, [H+] = 0.1 M, pH = 1.

Teacher's Note: Acid suppresses sulphide; find [H+] that keeps Q below Ksp.

Exam Note: [S2-] = K1K2[H2S]/[H+]^2.

Question 2.35. The salt Al(OH)3 is involved in the following two equilibria: Al(OH)3(s) ⇌ Al3+(aq.) + 3OH-(aq.); Ksp and Al(OH)3(s) + OH-(aq.) ⇌ Al(OH)4-(aq.); Kc. Which of the following relationship is correct at which solubility is minimum?

(a) [OH-] = (Ksp/Kc)1/3 (b) [OH-] = (Kc/Ksp)1/4 (c) [OH-] = ((Ksp/Kc)1/2)1/4 (d) None of these

Solution. Answer: (d) None of these. S = [Al3+] + [Al(OH)4-] = Ksp/[OH-]3 + Kc[OH-]. Minimum at dS/d[OH-] = 0: -3Ksp/[OH-]4 + Kc = 0, so [OH-] = (3Ksp/Kc)1/4. None of the printed forms (missing factor 3) matches, so (d).

Teacher's Note: Differentiate total solubility with respect to [OH-] and set to zero.

Exam Note: Solubility minimum: set derivative zero.

Level 3 - Passage 1 (Buffer solutions)

Question 3.Passage 1, Q1. One litre of an aqueous solution contains 0.15 mole of CH3COOH (pKa = 4.8) and 0.15 mole of CH3COONa. After the addition of 0.05 mole of solid NaOH to this solution, the pH will be:

(a) 4.5 (b) 4.8 (c) 5.1 (d) 5.4

Solution. Answer: (c) 5.1. NaOH converts acid to salt: acid = 0.10 mol, salt = 0.20 mol. pH = 4.8 + log(0.20/0.10) = 4.8 + 0.30 = 5.1.

Teacher's Note: Strong base converts acid into salt; recompute ratio.

Exam Note: Henderson with updated moles.

Question 3.Passage 1, Q2. Calculate the pH of a solution made by adding 0.01 mole of HCl in 100 mL of a solution which is 0.2 M in NH3 (pKb = 4.74) and 0.3 M in NH4+: (Assuming no change in volume)

(a) 5.34 (b) 8.66 (c) 7.46 (d) None of these

Solution. Answer: (b) 8.66. NH3 = 20 mmol, NH4+ = 30 mmol; 10 mmol HCl converts NH3 to NH4+: NH3 = 10, NH4+ = 40 mmol. pOH = 4.74 + log(40/10) = 4.74 + 0.60 = 5.34; pH = 8.66.

Teacher's Note: Basic buffer: answer 5.34 is pOH, not pH.

Exam Note: Convert pOH to pH at the end.

Question 3.Passage 1, Q3. Useful buffer range of weak acid HA (Ka = 10-5) is:

(a) 5 to 7 (b) 4 to 6 (c) 3 to 5 (d) None of these

Solution. Answer: (b) 4 to 6. Useful buffer range is pKa ± 1 = 5 ± 1 = 4 to 6 (salt/acid ratio between 1:10 and 10:1).

Teacher's Note: Salt-to-acid ratio between 1:10 and 10:1 gives pKa plus or minus 1.

Exam Note: Range = pKa ± 1.

Question 3.Passage 1, Q4. Select correct statement:

(a) When we add small amount of NaOH in acidic buffer solution, pOH of solution is increases (b) When we add small amount of NaOH in basic buffer solution, pH of solution is increases (c) When we add small amount of water in acidic buffer solution, pH of solution is decreases (d) When 100 mL of 0.2 M CH3COOH react with 200 mL of 0.1 M NaOH buffer solution is formed

Solution. Answer: (b) When we add small amount of NaOH in basic buffer solution, pH of solution is increases. (a) False: NaOH raises pH, so pOH decreases. (b) True: small increase in pH. (c) False: dilution leaves buffer pH nearly unchanged. (d) False: 20 mmol acid + 20 mmol NaOH gives only salt (no buffer).

Teacher's Note: Adding base can only raise pH; check each statement.

Exam Note: NaOH raises pH, lowers pOH.

Level 3 - Passage 2 (Hydrolysis of salts)

Question 3.Passage 2, Q1. Which of the following statement is true? (a) Weaker the acid, greater will be hydrolysis of its anion (b) Weaker the base, greater will be hydrolysis of its cation (c) Both (a) and (b) (d) None of these

(a) Weaker the acid, greater will be hydrolysis of its anion (b) Weaker the base, greater will be hydrolysis of its cation (c) Both (a) and (b) (d) None of these

Solution. Answer: (c) Both (a) and (b). Kh(anion) = Kw/Ka rises as the acid weakens, and Kh(cation) = Kw/Kb rises as the base weakens. Both statements are true.

Teacher's Note: Kh inversely related to Ka or Kb of the parent species.

Exam Note: Weaker parent means more hydrolysis.

Question 3.Passage 2, Q2. Select the correct statement: (a) KCl undergoes hydrolysis (b) Kh = Kb(A-) and Kh = Ka(B+) (c) 0.1 M solution of NaCN is acidic (d) resultant solution of equal volume of 0.1 M NH3 and 0.1 M HCl is basic

(a) KCl undergoes hydrolysis (b) Kh = Kb(A-) and Kh = Ka(B+) (c) 0.1 M solution of NaCN is acidic (d) resultant solution of equal volume of 0.1 M NH3 and 0.1 M HCl is basic

Solution. Answer: (b) Kh = Kb(A-) and Kh = Ka(B+). The hydrolysis constant of an anion equals its Kb, and that of a cation equals its Ka. KCl does not hydrolyse, NaCN is basic, and NH3 + HCl gives NH4Cl, which is acidic.

Teacher's Note: Kh of anion is its Kb; of cation its Ka.

Exam Note: Only the hydrolysis-constant statement holds.

Question 3.Passage 2, Q3. When pure ammonium chloride is dissolved in pure water, the pH of the resulting solution is not 7. This is because: (a) ammonium ions accept protons from water molecules leaving free OH- ions in solution (b) ammonium ions donate protons to water molecules forming H3O+ ions in solution (c) ammonium ions combine with water molecule to give the weak base, ammonium hydroxide (d) chloride ion made the solution acidic

(a) ammonium ions accept protons from water molecules leaving free OH- ions in solution (b) ammonium ions donate protons to water molecules forming H3O+ ions in solution (c) ammonium ions combine with water molecule to give the weak base, ammonium hydroxide (d) chloride ion made the solution acidic

Solution. Answer: (b) ammonium ions donate protons to water molecules forming H3O+ ions in solution. NH4+ + H2O ⇌ NH3 + H3O+: the ammonium ion donates a proton to water, giving H3O+ and an acidic solution. Chloride does not hydrolyse.

Teacher's Note: Ammonium acts as a Bronsted acid in water.

Exam Note: NH4+ donates H+ to water.

Question 3.Passage 2, Q4. Calculate percentage degree of hydrolysis in a 0.1 M solution of CH3COONa. (Ka of CH3COOH = 10-5)

(a) 0.1 (b) 0.01 (c) 10-4 (d) None of these

Solution. Answer: (b) 0.01. Kh = 10-14/10-5 = 10-9; h = √(Kh/C) = √(10-8) = 10-4, i.e. 0.01%.

Teacher's Note: Fraction 1e-4 equals 0.01 percent.

Exam Note: Convert fraction to percent.

Narendra Awasthi Solutions for JEE Mathematics: Narendra Awasthi Solutions Physical Chemistry Chapter 6 Ionic Equilibrium Part 1

Chapter-wise Narendra Awasthi Solutions: Narendra Awasthi Solutions Physical Chemistry Chapter 6 Ionic Equilibrium Part 1

Explore reliable mathematical solutions for Narendra Awasthi Solutions Physical Chemistry Chapter 6 Ionic Equilibrium Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.