Narendra Awasthi Solutions Physical Chemistry Chapter 6 Ionic Equilibrium Part 2

Step-by-Step Narendra Awasthi Solutions for JEE Chemistry Chapter 06 Ionic Equilibrium

Explore reliable textbook solutions for Chapter 06 Ionic Equilibrium tailored for JEE learners using Narendra Awasthi methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Download Chapter 06 Ionic Equilibrium Textbook Solutions PDF

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 6 Ionic Equilibrium - Level 3 Problems and Answers

Passage 3 (continued): Indicators and titration curves

Passage 3, Question 1. An indicator is a weak acid and pH range is 4.0 to 6.0. If indicator is 50% ionized in a given solution then what is the ionization constant of the acid?
(a) 10-4
(b) 10-5
(c) 10-6
(d) None of these

Solution. Answer (b) 10-5. At 50% ionization [HIn] = [In-], so pH = pKIn. The mid-point of the range 4.0 to 6.0 is pH 5, so pKIn = 5 and KIn = 10-5.

Teacher's Note: Half ionized means [In-] = [HIn], so pH = pKin; the range midpoint gives pKin.

Exam Note: Midpoint of the pH range equals pKin.

Passage 3, Question 2. Select the correct statement(s):
(a) At midway in the transition of an acidic indicator, pH = pKIn
(b) Methyl orange (3.1 to 4.4) is a suitable indicator for titration of weak acid and strong base
(c) Bromothymol blue (6.0 to 7.6) is a good indicator for titration of HCl and NaOH
(d) Thymol blue (1.2 to 2.8) is a very good indicator for titration of 100 mL of 0.1 M NH4OH (pKb = 4.74) and 0.1 M HCl

Solution. Answer (a, c). (a) is true. (b) is false: weak acid with strong base ends at pH above 7, outside 3.1 to 4.4. (c) is true: the equivalence point is pH 7 and the steep portion covers 6.0 to 7.6. (d) is false: the equivalence point has 0.05 M NH4Cl, pH = ½(pKa - log C) = ½(9.26 + 1.30) = 5.3, far from 1.2 to 2.8.

Teacher's Note: Compare the equivalence-point pH with the indicator range for each titration.

Exam Note: Indicator range must lie on the steep part.

Passage 3, Question 3.

Figure (described in words): titration curves of 5 milli-moles each of acids HA and HB against 0.1 M NaOH (pH on the y-axis, volume of NaOH in mL on the x-axis). Both curves have their steep rise at 50 mL (equivalence point). HB starts at pH 3; half-way (25 mL) the pH of HA is 6 and that of HB is 5 (dashed guide lines).

What is pKa for HB acid?


(a) 3
(b) 4
(c) 5
(d) 6

Solution. Answer (c) 5. At the half-neutralisation point [HB] = [B-], so pH = pKa. For HB this pH is 5. Check: 5 milli-moles in 50 mL gives 0.1 M and pH 3, so Ka = (10-3)2/0.1 = 10-5.

Teacher's Note: At half equivalence pH = pKa; cross-check with the initial pH.

Exam Note: Half-neutralisation pH gives pKa directly.

Passage 3, Question 4. What is the equilibrium constant for the reaction HB(aq.) + NaA(aq.) ⇌ HA(aq.) + NaB(aq.)?
(a) 10
(b) 0.1
(c) 10-7
(d) 10-11

Solution. Answer (a) 10. Keq = Ka(HB)/Ka(HA) = 10-5/10-6 = 10 (pKa of HA is 6 from the graph).

Teacher's Note: Reaction HB + A- gives HA + B-, so K = Ka(HB)/Ka(HA).

Exam Note: Write K as ratio of the two Ka values.

Passage 3, Question 5. Calculate the pH at equivalent point when HB is titrated with NaOH.
(a) 8.75
(b) 8.85
(c) 9.0
(d) None of these

Solution. Answer (b) 8.85. At equivalence 5 milli-moles of NaB are in 50 + 50 = 100 mL, so [NaB] = 0.05 M. pH = ½[pKw + pKa + log C] = ½[14 + 5 + log 0.05] = ½(19 - 1.30) = 8.85.

Teacher's Note: Salt of weak acid and strong base: use pH = ½(pKw + pKa + log C).

Exam Note: Dilution to 100 mL changes C; do not forget it.

Passage 3, Question 6. Which of the following indicator is most suitable for titration of HB with strong base:
(a) Phenolphthalein (8.3 - 10)
(b) Bromothymol blue (6 - 7.6)
(c) Methyl red (4.2 - 6.3)
(d) Malachite green (11.4 - 13)

Solution. Answer (a) Phenolphthalein. For the best indicator, pH ≈ pKIn and the transition range must lie on the steep portion of the titration curve. The equivalence point is pH 8.85, which lies within 8.3 to 10.

Teacher's Note: Equivalence pH 8.85 falls inside the phenolphthalein range.

Exam Note: Match indicator range to the equivalence-point pH.

Passage 4: Solubility product and precipitation

Passage 4, Question 1. Will a precipitate form if 50 cm3 of 0.01 M AgNO3 and 50 cm3 of 2 × 10-5 M NaCl are mixed? [Given: Ksp (AgCl) = 10-10 M2]
(a) Yes
(b) No
(c) Ionic product is less than solubility product, hence precipitate will form
(d) Data insufficient

Solution. Answer (a) Yes (answer from key; checked). After mixing equal volumes: [Ag+] = 0.005 M, [Cl-] = 10-5 M. Q = 5 × 10-8 > Ksp = 10-10, so AgCl precipitates.

Teacher's Note: Halve both concentrations on mixing, then compare Q with Ksp.

Exam Note: Dilution on mixing is the usual lost mark.

Passage 4, Question 2. Will a precipitate form if 1 volume of 0.1 M Pb2+ ion solution is mixed with 3 volume of 0.3 M Cl- ion solution? [Given: Ksp (PbCl2) = 1.7 × 10-5 M3]
(a) Yes
(b) No
(c) Ionic product is less than solubility product, hence precipitate will form
(d) Data insufficient

Solution. Answer (a) Yes (answer from key; checked). After mixing (total 4 volumes): [Pb2+] = 0.1/4 = 0.025 M, [Cl-] = 0.9/4 = 0.225 M. Q = [Pb2+][Cl-]2 = 0.025 × (0.225)2 = 1.27 × 10-3 > 1.7 × 10-5, so PbCl2 precipitates.

Teacher's Note: Use total volume of 4 parts; square the chloride concentration in Q.

Exam Note: Square [Cl-] because of the coefficient 2.

Passage 4, Question 3. At 25°C, will a precipitate of Mg(OH)2 form when a 0.0001 M solution of Mg(NO3)2 is adjusted to a pH of 9.0? At what minimum value of pH will precipitation start? [Given: Ksp (Mg(OH)2) = 10-11 M3]
(a) No, pH = 3.5
(b) No, pH = 10.5
(c) No, pH = 6.0
(d) Yes, pH = 8.5

Solution. Answer (b) No, pH = 10.5 (answer from key; checked). At pH 9, [OH-] = 10-5, so Q = 10-4 × (10-5)2 = 10-14 < 10-11: no precipitate. Precipitation starts when [OH-]2 = 10-11/10-4 = 10-7, [OH-] = 3.16 × 10-4, pOH = 3.5, pH = 10.5.

Teacher's Note: Find minimum [OH-] from Ksp/[Mg2+], then convert to pH.

Exam Note: Convert pOH to pH at the end.

Passage 4, Question 4. Determine the molar solubility of MgF2 from its solubility product Ksp = 4 × 10-9:
(a) 10-3
(b) 6.32 × 10-5
(c) 2 × 10-5
(d) None of these

Solution. Answer (a) 10-3 M (answer from key; checked). MgF2 ⇌ Mg2+ + 2F-, Ksp = s(2s)2 = 4s3 = 4 × 10-9, so s = 10-3 M.

Teacher's Note: AB2 type salt: Ksp = 4s^3, so s is the cube root of Ksp/4.

Exam Note: Use 4s^3 for AB2 salts.

Passage 4, Question 5. The solubility product of ferric hydroxide in aqueous solution is 6 × 10-38 at 298 K. The solubility of Fe3+ ion will increase when the:
(a) pH is increased
(b) pH is 7.0
(c) pH is decreased
(d) saturated solution is exposed to the atmosphere

Solution. Answer (c) pH is decreased (answer from key; checked). Lowering the pH removes OH- (H+ + OH- → H2O), shifting Fe(OH)3 ⇌ Fe3+ + 3OH- to the right, so more Fe3+ dissolves.

Teacher's Note: Acid removes OH-, shifting the solubility equilibrium forward.

Exam Note: Hydroxides dissolve more in acidic solution.

One or More Answers is/are Correct

One or More Correct, Question 1. Which is/are wrong statement(s)?
(a) Arrhenius acids are also Bronsted acids but all Arrhenius bases are not Bronsted bases
(b) All Lewis bases are Bronsted bases
(c) All Bronsted acids are Lewis acids
(d) Conjugate base of a strong acid is weak

Solution. Answer (b, c) (Answer from key). (c) is wrong because Bronsted acids such as HCl are not themselves electron-pair acceptors (only H+ is). (b) is taken as wrong because Lewis bases need not accept a proton. (d) is a correct statement. The book key marks (a) as correct. Needs a human check on (a) and (b).

Teacher's Note: Compare definitions: proton transfer versus electron-pair transfer.

Exam Note: Lewis and Bronsted classes overlap but differ.

One or More Correct, Question 2. Which of the following are conjugate acid-base pairs:
(a) HCO3-, CO32- (b) C6H5NH3+, C6H5NH2 (c) H2C2O4, HC2O4- (d) OH-, H+

Solution. Answer (a, b, c) (answer from key; checked). Each of these pairs differs by exactly one proton. OH- and H+ do not (OH- pairs with H2O).

Teacher's Note: A conjugate pair differs by exactly one proton.

Exam Note: Check one-proton difference only.

One or More Correct, Question 3. Which are the set of amphiprotic species?
(a) H2O, H2PO4-, HPO42- (b) HPO42-, HCO3- (c) H2PO2-, H2PO3-, HC2O4- (d) HPO32-, H2O, CO32-

Solution. Answer (a, b) (answer from key; checked). Amphiprotic species can both donate and accept a proton. In (c), H2PO2- (from monobasic H3PO2) has no acidic H; in (d), HPO32- has no acidic H and CO32- has none, so both sets fail.

Teacher's Note: Needs an ionisable H and a lone pair; check the parent acid basicity.

Exam Note: Oxyacids of P: H3PO2 monobasic, H3PO3 dibasic.

One or More Correct, Question 4. Which of the following statements is/are not correct?
(a) A substance which can provide OH- in aqueous medium is a base
(b) A substance which can accept a pair of electron is a base
(c) A substance which can accept a proton in aqueous medium is a base
(d) A substance which can donate a pair of electron is a base

Solution. Answer (b) (answer from key; checked). Accepting an electron pair makes a Lewis acid, not a base. The other three are the Arrhenius, Bronsted and Lewis definitions of a base.

Teacher's Note: Electron-pair acceptor is Lewis acid; donor is Lewis base.

Exam Note: Do not swap Lewis acid and base roles.

One or More Correct, Question 5. If degree of ionization (α) of a weak electrolyte AB is very less than 1, then α is:
(a) directly proportional to the square root of volume of solution
(b) inversely proportional to the dilution
(c) inversely proportional to the square root of concentration
(d) directly proportional to concentration

Solution. Answer (a, c) (answer from key; checked). For α << 1, K = Cα2, so α = √(K/C) = √(KV): inversely proportional to √C and directly proportional to √V.

Teacher's Note: Ostwald dilution law with small alpha: alpha equals sqrt(K/C).

Exam Note: State alpha proportional to 1/sqrt(C).

One or More Correct, Question 6. Factor influencing the degree of ionization of a weak electrolyte is:
(a) dilution (b) temperature (c) presence of other ions (d) nature of solvent

Solution. Answer (a, b, c, d) (answer from key; checked). Dilution, temperature, common or other ions and the nature of the solvent (dielectric constant) all affect α.

Teacher's Note: Alpha depends on concentration, temperature, common ions and solvent.

Exam Note: List all four factors for full marks.

One or More Correct, Question 7. Which of the following statement(s) is/are correct about the ionic product of water?
(a) Ki (ionization constant of water) < Kw (ionic product of water)
(b) pKi > pKw
(c) At 25°C, Ki = 1.8 × 10-14
(d) Ionic product of water at 10°C is 10-14

Solution. Answer (a, b) (answer from key; checked). Ki = Kw/[H2O] = 10-14/55.5 = 1.8 × 10-16, so Ki < Kw and pKi > pKw. (c) is false (value is 1.8 × 10-16). (d) is false: Kw = 10-14 only at 25°C and is smaller at 10°C.

Teacher's Note: Ki equals Kw divided by 55.5 mol/L of water.

Exam Note: Kw depends on temperature; Ki is Kw/55.5.

One or More Correct, Question 8. Which among the following statement is/are correct?
(a) pH = -log10 [H3O+] for dilute solution
(b) pH of H2O decreases with increase of temperature
(c) pH can not more than 14
(d) If a solution is diluted ten times, its pH always increases by 1

Solution. Answer (a, b) (answer from key; checked). (b) Kw rises with temperature, so [H+] of pure water rises and pH falls. (c) is false (pH can exceed 14 for concentrated base). (d) is false (an acid at 10-7 M, a weak acid or a buffer does not change by exactly 1).

Teacher's Note: Kw grows with temperature; dilution rule fails near 10^-7 M.

Exam Note: Neutral pH is 7 only at 25 degrees C.

One or More Correct, Question 9. If concentrations of two weak acids are different and D.O.I. (α) are very less than 1, their relative strength can be compared by:
(a) [H+]1/[H+]2 (b) α1/α2 (c) C1α1/C2α2 (d) Ka1C1/Ka2C2

Solution. Answer (a, c) (answer from key; checked). Strength is compared by [H+] = Cα, so [H+]1/[H+]2 = C1α1/C2α2. α1/α2 works only when the concentrations are equal.

Teacher's Note: With unequal concentrations compare [H+] = C alpha, not alpha alone.

Exam Note: alpha ratio needs equal concentrations.

One or More Correct, Question 10. If concentration of two weak bases are same and D.O.I. (α) are very less than 1, their relative strength can be compared by:
(a) [OH-]1/[OH-]2 (b) Kb1/Kb2 (c) α1/α2 (d) √Kb1/√Kb2

Solution. Answer (a, c, d) (answer from key; checked). For equal C, [OH-] = Cα = √(KbC), so the ratio of strengths = [OH-]1/[OH-]2 = α1/α2 = √(Kb1/Kb2). Kb1/Kb2 itself is the square of the strength ratio.

Teacher's Note: Equal C: alpha and [OH-] ratios equal root of Kb ratio.

Exam Note: Root of Kb ratio, not Kb ratio itself.

One or More Correct, Question 11. Which of the following expressions is/are true?
(a) [H+] = [OH-] = √Kw for a neutral solution
(b) [OH-] < √Kw for an acidic solution
(c) pH + pOH = 14 at all temperature
(d) [OH-] = 10-7 M at 25°C

Solution. Answer (a, b, d) (answer from key). (a) and (b) are true. (c) is false: pH + pOH = pKw, which is 14 only at 25°C. (d) is accepted by the key as the neutral-solution value at 25°C (strictly true only for a neutral solution). Needs a human check on (d).

Teacher's Note: Neutral means [H+] = [OH-] = root of Kw; temperature dependent.

Exam Note: pH + pOH = pKw, not always 14.

One or More Correct, Question 12. If Ka1, Ka2 and Ka3 be the first, second and third ionization constant of H3PO4 and Ka1 >> Ka2 >> Ka3, which is/are correct:
(a) [H+] ≈ √(Ka1 [H3PO4]) (b) [H+] ≈ [HPO42-] (c) Ka2 ≈ [HPO42-] (d) [HPO42-] = [PO43-]

Solution. Answer (a, c) (answer from key; checked). The first step gives nearly all the H+: [H+] ≈ [H2PO4-] = √(Ka1[H3PO4]). Then Ka2 = [H+][HPO42-]/[H2PO4-] ≈ [HPO42-]. (b) and (d) are false.

Teacher's Note: First ionisation supplies H+, so [H+] equals [H2PO4-] and Ka2 equals [HPO4^2-].

Exam Note: Ka2 equals [HPO4^2-] when [H+] = [H2PO4-].

One or More Correct, Question 13. Which of the following mixtures constitute a buffer?
(a) HCOOH + HCOONa (b) Na2CO3 + NaHCO3 (c) NaCl + HCl (d) NH4Cl + (NH4)2SO4

Solution. Answer (a, b) (answer from key; checked). A buffer needs a weak acid with its conjugate base (or weak base with its conjugate acid). (c) is a strong acid with its neutral salt and (d) is two salts of a weak base, so neither is a buffer.

Teacher's Note: Buffer needs a weak acid-conjugate base pair, not two salts.

Exam Note: Name the conjugate pair in the answer.

One or More Correct, Question 14. Which of the following mixtures can act as a buffer?
(a) NaOH + HCOONa (1 : 1 molar ratio) (b) HCOOH + NaOH (2 : 1 molar ratio) (c) NH4Cl + NaOH (2 : 1 molar ratio) (d) HCOOH + NaOH (1 : 1 molar ratio)

Solution. Answer (b, c) (answer from key; checked). (b) 2 HCOOH + NaOH leaves HCOOH and HCOONa 1 : 1. (c) 2 NH4Cl + NaOH leaves NH4Cl and NH3 1 : 1. (a) has a strong base present and (d) gives only the salt.

Teacher's Note: Partial neutralisation of a weak acid or base gives a buffer.

Exam Note: Count moles left after reaction.

One or More Correct, Question 15. Which of the following will function as buffer?
(a) NaCl + NaOH (b) Borax + boric acid (c) NaH2PO4 + Na2HPO4 (d) NH4Cl + NH4OH

Solution. Answer (b, c, d) (answer from key; checked). Each is a weak acid or base with its conjugate partner. NaCl + NaOH is a neutral salt with a strong base, not a buffer.

Teacher's Note: Look for weak acid/base plus conjugate partner.

Exam Note: H2PO4-/HPO4^2- is a phosphate buffer.

One or More Correct, Question 16. Which of the following statements is/are correct?
(a) The conjugate acid of NH2- is NH3
(b) Solubility product constant increases with increase in concentration of ions
(c) On diluting a buffer solution pH change is negligible
(d) In alkaline buffer solution, if some HCl is added, its [OH-] will increase

Solution. Answer (a, c) (answer from key; checked). (b) is false: Ksp depends only on temperature. (d) is false: added HCl consumes OH-, so [OH-] decreases slightly.

Teacher's Note: Ksp changes only with temperature; acid added lowers [OH-].

Exam Note: Ksp is not changed by concentration.

One or More Correct, Question 17. Degree of hydrolysis (α) for a salt of strong acid and weak base is:
(a) independent of dilution (b) increases with dilution (c) increases with decrease in Kb (d) increases with increase in temperature

Solution. Answer (b, c, d) (answer from key; checked). h = √(Kh/C) = √(Kw/(KbC)): it increases on dilution (smaller C), with smaller Kb, and with temperature (Kw and Kh rise).

Teacher's Note: h equals sqrt(Kw/(Kb C)); read off the dependence.

Exam Note: Hydrolysis is endothermic, so h rises with T.

One or More Correct, Question 18. The compound whose 0.1 M solution is acidic: [pKa of HCOOH = 3.75, pKb of NH4OH = 4.74]
(a) Ammonium formate (b) Ammonium sulphate (c) Ammonium chloride (d) Sodium formate

Solution. Corrected: answer (a, b, c). The book key prints (b, c). Ammonium formate is a salt of weak acid and weak base with pKa < pKb: pH = ½(pKw + pKa - pKb) = ½(14 + 3.75 - 4.74) = 6.5, which is acidic. (NH4)2SO4 and NH4Cl are strong acid with weak base (acidic). Sodium formate is basic.

Teacher's Note: Weak acid weak base salt: compare pKa and pKb to decide.

Exam Note: Ammonium formate pH 6.5, so slightly acidic.

One or More Correct, Question 19. Formic acid is a weak acid and hydrochloric acid is a strong acid. It follows that the:
(a) [OH-] of 0.01 M HCl (aq.) will be less than that of 0.01 M HCOOH (aq.)
(b) solution containing 0.1 M NaOH (aq.) and 0.1 M HCOONa (aq.) is a buffer solution
(c) pH of 10-9 M HCl (aq.) will be approximately 7 at 25°C
(d) pH of a solution formed by mixing equimolar quantities of HCOOH and HCl will be less than that of a similar solution formed from HCOOH and HCOONa

Solution. Answer (a, c, d) (answer from key; checked). (a) HCl gives higher [H+], hence lower [OH-]. (b) is false: a strong base with a salt is not a buffer. (c) water supplies the H+, so pH ≈ 7. (d) HCOOH + HCl is more acidic than the HCOOH/HCOONa buffer.

Teacher's Note: Strong acid has lower [OH-]; at 10^-9 M water dominates.

Exam Note: Very dilute strong acid gives pH near 7.

One or More Correct, Question 20. If you have a saturated solution of CaF2, then:
(a) [Ca2+] = (Ksp/4)1/3 (b) 2 × [Ca2+] = [F-] (c) [Ca2+] = 2[F-] (d) [Ca2+] = √Ksp

Solution. Answer (a, b) (answer from key; checked). CaF2 ⇌ Ca2+ + 2F-, [Ca2+] = s, [F-] = 2s, Ksp = 4s3, so s = (Ksp/4)1/3.

Teacher's Note: AB2 salt: [F-] is twice [Ca2+], Ksp = 4s^3.

Exam Note: Write stoichiometric concentrations first.

One or More Correct, Question 21. Which is/are correct statement(s) about the solubility of AgCl(s)? Given: Ksp(AgCl) = 10-10; Kf[Ag(NH3)2+] = 108.
(a) Solubility of AgCl in pure water is 10-5 gm/litre
(b) Solubility of AgCl in 2 M KBr is 10-5 mol/litre
(c) Solubility of AgCl in 2 M AgNO3 is 5 × 10-11 M
(d) Solubility of AgCl in 2 M NH3 is 0.182 M

Solution. Answer (b, c, d) (answer from key). (a) is false: s = √Ksp = 10-5 mol/L, not gm/L. (b) KBr has no common ion with AgCl, so s = 10-5 mol/L as in water (the book ignores AgBr formation). (c) s(s + 2) = 10-10 gives s = 5 × 10-11 M. (d) AgCl + 2NH3 ⇌ [Ag(NH3)2]+ + Cl-, K = KspKf = 10-2; s2/(2 - s)2 = 10-2, so s/(2 - s) = 0.1 and s = 2/11 = 0.182 M.

Teacher's Note: Complex formation: K equals Ksp times Kf, then solve for s.

Exam Note: Units: mol/L versus gm/L trap in (a).

One or More Correct, Question 22. H2A is a weak diprotic acid. If the pH of 0.1 M H2A solution is 3 and concentration of A2- is 10-12 at 25°C. Select correct statement(s):
(a) [H+]total ≈ [H+] from first step of ionisation of acid H2A
(b) Concentration of OH- in solution is 10-3 M
(c) The value of Ka1 is nearly 10-5
(d) pKa2 - pKa1 = 9

Solution. Answer (a, c). Since [H+] ≈ [HA-] = 10-3 M, Ka2 = [H+][A2-]/[HA-] ≈ [A2-] = 10-12, so pKa2 = 12. Ka1 = (10-3)2/0.1 = 10-5, pKa1 = 5. (b) is false: [OH-] = 10-11 M. (d) is false: pKa2 - pKa1 = 7.

Teacher's Note: For diprotic acid, Ka2 equals [A2-] when [H+] equals [HA-].

Exam Note: Check each option against Ka1 and Ka2 values.

One or More Correct, Question 23. Which is/are correct statement(s)?
(a) CH3COONH4 have greater degree of hydrolysis in 0.2 M solution in comparison of 0.4 M solution
(b) Anion have lesser basic strength than OH-, does not hydrolyse
(c) The CH3COO- have greater degree of hydrolysis in comparison with HCOO- when their salt solution have equal conc.
(d) SO42- does hydrolyse but HSO4- does not undergo hydrolysis

Solution. Answer (c, d) (answer from key; checked). (a) is false: for a salt of weak acid and weak base, h = √(Kw/(KaKb)) is independent of concentration. (b) is false: any anion of a weak acid hydrolyses even though it is a weaker base than OH-. (c) CH3COOH is weaker than HCOOH, so its anion hydrolyses more. (d) HSO4- is the conjugate base of a strong acid and does not hydrolyse as a base.

Teacher's Note: Weak-weak salt: h independent of concentration; weaker parent acid means stronger anion.

Exam Note: h is concentration independent for weak-weak salts.

One or More Correct, Question 24. 0.01 M NH4Cl (aq) solution at 25°C has:
(a) [Cl-(aq)] < 10-2 M (b) [NH4+(aq)] < 10-2 M (c) pOH > 7 (d) [H+] > 10-7 M

Solution. Answer (b, c, d) (answer from key; checked). Cl- does not hydrolyse, so [Cl-] = 10-2 M and (a) is false. NH4+ partly hydrolyses, so [NH4+] < 10-2 M; the solution is acidic, [H+] > 10-7 M and pOH > 7.

Teacher's Note: Only the ammonium ion hydrolyses; chloride stays at 0.01 M.

Exam Note: Acidic salt solution: pH below 7, pOH above 7.

One or More Correct, Question 25. In an acidic indicator HIn has ionisation constant 10-8. The acid form of indicator is yellow and alkaline form is red. Which is correct statement: (Given: log 2 = 0.3, log 3 = 0.48)
(a) The pH range of indicator is 7 to 9
(b) Change in pH is 0.96 when 75% yellow colour change to 75% red colour
(c) This indicator is suitable for the titration of strong acid Vs strong base
(d) pH of indicator is 8.3 when ratio of acid form to alkaline form is 2.

Solution. Answer (a, b, c). pKIn = 8, so the range is pKIn ± 1 = 7 to 9 (a). 75% yellow: pH = 8 + log(25/75) = 7.52; 75% red: pH = 8 + log(75/25) = 8.48; change = 0.96 (b). The steep portion of a strong acid-strong base titration spans about pH 4 to 10, so the indicator is suitable (c). (d) is false: with [HIn]/[In-] = 2, pH = 8 - 0.3 = 7.7.

Teacher's Note: Use pH = pKin + log([In-]/[HIn]) for each colour condition.

Exam Note: Show the pH calculation for each option.

Match the Column

Match the Column, Question 1. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) HCl(P) Bronsted base
(B) NH3(Q) Bronsted acid
(C) H2O(R) Arrhenius acid
(D) CN-(S) Lewis base in adduct displacement reaction

Solution. Answer (from key): A → Q, R; B → P, S; C → P, Q, S; D → P, S. HCl is a Bronsted and Arrhenius acid; NH3 and CN- accept protons and donate electron pairs; H2O is amphiprotic and a Lewis base.

Teacher's Note: Classify each species by proton transfer and electron-pair donation.

Exam Note: Water is both Bronsted acid and base.

Match the Column, Question 2. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) Conjugate acid-base pair(P) Bronsted-Lowry concept
(B) Acid-base adduct(Q) Lewis concept
(C) An acid-base reaction(R) Arrhenius concept
(D) Proton donation(S) Ka · Kb = Kw

Solution. Answer (from key): A → P, S; B → Q; C → P, Q, R; D → P, R. Conjugate pairs belong to Bronsted-Lowry theory and obey KaKb = Kw; adducts belong to the Lewis concept; acid-base reactions fit all three concepts; proton donation is Bronsted and Arrhenius.

Teacher's Note: Match each term to the theory that defines it.

Exam Note: Adduct formation is a Lewis concept.

Match the Column, Question 3. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) Fe(NO3)2(aq.)(P) Only cationic hydrolysis
(B) KClO4(aq.)(Q) Only anionic hydrolysis
(C) HCOONa(aq.)(R) Both cationic as well as anionic hydrolysis
(D) NH4CN(aq.)(S) No hydrolysis

Solution. Answer (from key): A → P; B → S; C → Q; D → R. Fe2+ (weak base cation, strong acid anion) hydrolyses only as a cation; KClO4 is strong acid with strong base; HCOO- hydrolyses only as an anion; NH4CN is weak acid with weak base so both ions hydrolyse.

Teacher's Note: Decide strength of parent acid and base for each salt.

Exam Note: Strong acid with strong base gives no hydrolysis.

Match the Column, Question 4. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) Salt of weak acid and weak base(P) pH = ½[pKw + pKa + log C]
(B) Salt of weak acid and strong base(Q) pH = ½[pKw + pKa - pKb]
(C) Salt of strong acid and strong base(R) pH = ½[pKw - pKb - log C]
(D) Salt of strong acid and weak base(S) pH = ½[pKw]

Solution. Answer (from key): A → Q; B → P; C → S; D → R. These are the standard hydrolysis pH formulas for each type of salt.

Teacher's Note: Recall the four standard salt pH formulas by type.

Exam Note: Learn the four formulas by salt type.

Match the Column, Question 5. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) Salt of weak acid and weak base (pKa = pKb)(P) pH of solution at 25°C less than 7
(B) Salt of weak acid and strong base(Q) pH of solution at 25°C greater than 7
(C) Salt of strong acid and strong base(R) pH of solution at 25°C equal to 7
(D) Salt of strong acid and weak base(S) pH cannot be find until the value of Ka/Kb is given

Solution. Answer (from key): A → R; B → Q, S; C → R; D → P, S. With pKa = pKb the pH is 7; basic or acidic salts have pH above or below 7, and the exact value needs Ka or Kb (S). Match B → S and D → S are taken from the key; human check advised.

Teacher's Note: Qualitative pH of salt types; exact value needs Ka or Kb.

Exam Note: Qualitative pH versus numerical pH.

Match the Column, Question 6. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) pH of 0.1 M HA (pKa = 5) and 0.01 M NaA(P) 4
(B) pH of 0.1 M BOH (pKb = 6) and 0.1 M BCl(Q) 7
(C) pH of 0.1 M salt of weak acid (pKa = 5) and weak base (pKb = 7)(R) 6
(D) pH of 500 litre of 0.02 M HNO3 and 500 litre 0.01 M Sr(OH)2(S) 8

Solution. Answer: A → P; B → S; C → R; D → Q (matches key). (A) pH = 5 + log(0.01/0.1) = 4. (B) pOH = 6 + log(0.1/0.1) = 6, pH = 8. (C) pH = ½(14 + 5 - 7) = 6. (D) H+ = 0.02 × 500 = 10 mol; OH- = 2 × 0.01 × 500 = 10 mol; exact neutralisation, pH = 7.

Teacher's Note: Buffer formula for A, B; weak-weak salt formula for C; mole count for D.

Exam Note: Check mole balance before applying formulas.

Match the Column, Question 7. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) CH3COOH (pKa = 4.74, 0.1 M) + CH3COONa (0.1 M)(P) Acidic buffer at its maximum capacity
(B) CH3COOH (0.1 M) + HCl (0.1 M)(Q) Buffer solution
(C) CH3COOH (pKa = 4.74, 0.1 M) + NH4OH (pKb = 4.74, 0.1 M)(R) pH < 7 at 25°C
(D) CH3COONa (300 mL of 0.1 M) + HCl (100 mL of 0.1 M)(S) pH = 7 at 25°C

Solution. Answer (from key): A → P, Q, R; B → R; C → Q, S; D → Q, R. (A) equal acid and salt gives maximum capacity, pH = 4.74. (B) strong acid present, pH < 7 and not a buffer. (C) ammonium acetate with pKa = pKb has pH 7 (the key also counts it as a buffer). (D) 30 mmol acetate + 10 mmol HCl leaves 20 mmol acetate and 10 mmol acetic acid: acidic buffer, pH = 4.74 + log 2 = 5.04. C → Q taken from key; human check advised.

Teacher's Note: Count mmol after reaction to decide buffer or not.

Exam Note: Equal acid and salt gives maximum buffer capacity.

Match the Column, Question 8. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) Titration of a strong acid with strong base(P) Methyl orange (3.1 - 4.4)
(B) Titration of weak acid with strong base(Q) Methyl red (4.2 - 6.3)
(C) Titration of strong acid with weak base(R) Phenolphthalein (8.3 - 10)
(D) Titration of weak acid with weak base(S) No general indicator is suitable

Solution. Answer (from key): A → P, Q, R; B → R; C → P, Q; D → S. Strong acid with strong base has a very steep jump (pH 4 to 10), so all three work. Weak acid with strong base ends above 7: phenolphthalein. Strong acid with weak base ends below 7: methyl orange or methyl red. Weak acid with weak base has no sharp jump.

Teacher's Note: Match equivalence-point pH region with indicator range.

Exam Note: Weak-weak titration has no sharp end point.

Match the Column, Question 9. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) At the start of titration(P) Buffer solution of HCO3- and CO32-
(B) Before the first equivalent point(Q) Buffer solution of H2CO3 and HCO3-
(C) At the first equivalent point(R) Amphiprotic anion, pH = ½(pKa1 + pKa2)
(D) Between the first and second equivalent points(S) Hydrolysis of CO32-

Solution. Answer (from key): A → S; B → P; C → R; D → Q. Start: only Na2CO3 that hydrolyses. Before first equivalence: CO32-/HCO3- buffer. First equivalence: HCO3- only, pH = ½(pKa1 + pKa2). Between equivalences: H2CO3/HCO3- buffer.

Teacher's Note: Track species present at each stage of Na2CO3 plus HCl.

Exam Note: Name the dominant species at each stage.

Match the Column, Question 10. Match Column-I with Column-II (one entry of Column-I may match more than one entry of Column-II).

Column-IColumn-II
(A) Mercurous iodide(P) 108 S5
(B) Aluminium phosphate(Q) 4S3
(C) Calcium phosphate(R) S2
(D) Zirconium phosphate(S) 6912 S7

Solution. Answer (from key; checked): A → Q; B → R; C → P; D → S. Hg2I2 ⇌ Hg22+ + 2I-: Ksp = S(2S)2 = 4S3. AlPO4: Ksp = S × S = S2. Ca3(PO4)2: (3S)3(2S)2 = 108S5. Zr3(PO4)4: (3S)3(4S)4 = 27 × 256 S7 = 6912S7.

Teacher's Note: Write dissociation, put coefficients as powers, multiply the factors.

Exam Note: Mercurous ion is Hg2 2+, a single unit.

Assertion-Reason Type Questions

Assertion-Reason, Question 1. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: All strong monoprotic acid with same concentration in dilute solution show same pH.
Statement-2: Water shows levelling effect.

Solution. Answer (A). Strong acids are completely ionised and water levels them all to H3O+, so equal concentrations give equal pH. Statement-2 explains Statement-1.

Teacher's Note: Levelling effect makes all strong acids equally strong in water.

Exam Note: Levelling explains equal pH of strong acids.

Assertion-Reason, Question 2. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: If water is heated to 50°C then pH will increase.
Statement-2: Kw increases with increase in temperature.

Solution. Answer (D). Statement-1 is false: as Kw increases, [H+] of pure water increases and pH decreases. Statement-2 is true.

Teacher's Note: Higher Kw means more H+, so pH falls although water stays neutral.

Exam Note: Neutral water pH drops on heating.

Assertion-Reason, Question 3. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: Addition of HCl(aq.) to HCOOH(aq.) decrease the ionization of HCOOH(aq.).
Statement-2: Due to common ion effect of H+, ionization of HCOOH decrease.

Solution. Answer (A). Extra H+ from HCl shifts HCOOH ⇌ H+ + HCOO- to the left (common ion effect), reducing ionisation. Statement-2 is the explanation.

Teacher's Note: Common H+ suppresses weak acid ionisation by Le Chatelier.

Exam Note: Name the common ion effect.

Assertion-Reason, Question 4. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: pH of 10-7 M HCl is less than 7 at 25°C.
Statement-2: At very low concentration of HCl, contribution of H+ from water is considerable.

Solution. Answer (A). [H+] = 10-7 (acid) + 10-7 (water) ≈ 1.6 × 10-7 M, so pH ≈ 6.8 < 7. Statement-2 explains it.

Teacher's Note: Add water H+ at 10^-7 M acid concentration.

Exam Note: Include water ionisation for dilute acids.

Assertion-Reason, Question 5. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: The ionization constants of weak diprotic acid are in the order of Ka1 > Ka2.
Statement-2: Removal of H+ from anion is difficult as compare to neutral atom.

Solution. Answer (A). The second H+ must leave an already negative ion, which is harder than leaving a neutral molecule, so Ka1 > Ka2. Statement-2 is the explanation.

Teacher's Note: Proton leaves a negative ion less easily than a neutral molecule.

Exam Note: Explain via charge on the leaving species.

Assertion-Reason, Question 6. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: When 0.1 M weak diprotic acid H2A dissociates with its dissociation constants Ka1 = 10-3 and Ka2 = 10-8, then [A2-] is almost equal to 10-3 M.
Statement-2: Since Ka2 << Ka1 for 0.1 M H2A, so [A2-] is negligible w.r.t. [HA-].

Solution. Answer (D). [A2-] ≈ Ka2 = 10-8 M, not 10-3 M (10-3 is [HA-] ≈ [H+]). Statement-1 is false and Statement-2 is true.

Teacher's Note: Second ionisation product equals Ka2 when H+ equals HA-.

Exam Note: Do not confuse [A2-] with [HA-].

Assertion-Reason, Question 7. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: pH value of acidic buffer solution change, if buffer solution is diluted up to very larger extent.
Statement-2: [H+] decrease due to change in concentration as well as α and decrease in concentration is more as compare to increase in α.

Solution. Answer (A). On extreme dilution the buffer ratio stays fixed but the [H+] from the acid falls (concentration falls faster than α rises), so pH changes. Statement-2 explains it (taken from key; checked).

Teacher's Note: Buffer pH is dilution-proof only until water contributes.

Exam Note: Large dilution breaks buffer action.

Assertion-Reason, Question 8. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: In a titration of weak acid with strong base, the pH at the half equivalence point is pKa.
Statement-2: At half equivalence point, it will form acidic buffer at its maximum capacity where [acid] = [salt].

Solution. Answer (A). At half equivalence [HA] = [A-], so pH = pKa + log 1 = pKa; this is the maximum-capacity buffer. Statement-2 explains Statement-1.

Teacher's Note: Equal acid and salt in the buffer equation gives pKa.

Exam Note: pH = pKa at half neutralisation.

Assertion-Reason, Question 9. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: In the titration of Na2CO3 with HCl using methyl orange indicator, the volume of the acid required at the equivalence point is twice that of the acid required using phenolphthalein as indicator.
Statement-2: Two moles of HCl are required for the complete neutralisation of one mole Na2CO3.

Solution. Answer (B). Phenolphthalein marks conversion of CO32- to HCO3- (1 mol HCl); methyl orange marks complete conversion to H2CO3 (2 mol), so volume is double. Both true, but Statement-2 alone does not explain the indicator difference (answer from key; checked).

Teacher's Note: Phenolphthalein sees first step, methyl orange both steps.

Exam Note: Two end points: half and full neutralisation.

Assertion-Reason, Question 10. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: In the acid-base titration involving strong base and weak acid, methyl red can be used as an indicator.
Statement-2: Methyl red changes its colour in the pH range 4.2 to 6.3.

Solution. Answer (D). The equivalence point of weak acid with strong base lies above pH 7, outside 4.2 to 6.3, so methyl red is unsuitable. Statement-1 is false, Statement-2 is true.

Teacher's Note: Equivalence pH above 7 needs phenolphthalein, not methyl red.

Exam Note: Indicator range must contain equivalence pH.

Assertion-Reason, Question 11. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: Sparingly soluble salts AB and XY2 with the same solubility product, will have different solubility.
Statement-2: Solubility of sparingly soluble salts depend upon solubility product.

Solution. Answer (B). AB: s = √Ksp; XY2: s = (Ksp/4)1/3, so solubilities differ for equal Ksp. Both true, but Statement-2 does not explain why they differ (stoichiometry does).

Teacher's Note: Equal Ksp does not mean equal solubility for different types.

Exam Note: Solubility depends on salt stoichiometry.

Assertion-Reason, Question 12. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: Solubility product of BaF2 will increase on dilution.
Statement-2: Solubility of BaF2 will change on changing temperature.

Solution. Answer (D). Ksp depends only on temperature, not on dilution, so Statement-1 is false. Statement-2 is true.

Teacher's Note: Ksp is constant at fixed temperature.

Exam Note: Ksp changes only with temperature.

Assertion-Reason, Question 13. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: Solubility of sparingly soluble salt decreases due to common ion effect.
Statement-2: Solubility product constant does not depend on common ion effect.

Solution. Answer (B). Both true: adding a common ion lowers solubility while Ksp stays constant. Statement-2 does not explain why solubility falls (Le Chatelier does).

Teacher's Note: Ksp stays constant while solubility shifts down.

Exam Note: Common ion lowers solubility, not Ksp.

Assertion-Reason, Question 14. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: Solubility of AgCl in NH3(aq.) is greater than in pure water.
Statement-2: When AgCl dissolve in NH3(aq.), complex ion formation Ag(NH3)2+ takes place and solubility equilibria of AgCl shifted in forward direction.

Solution. Answer (A). Ag+ is removed as [Ag(NH3)2]+, so AgCl ⇌ Ag+ + Cl- shifts forward and more AgCl dissolves. Statement-2 explains Statement-1.

Teacher's Note: Complexation removes Ag+, pulling the solubility equilibrium forward.

Exam Note: Complex ion formation raises solubility.

Assertion-Reason, Question 15. Each question contains Statement-1 (Assertion) and Statement-2 (Reason). Mark: (A) both true and Statement-2 is the correct explanation of Statement-1; (B) both true but Statement-2 is not the correct explanation; (C) Statement-1 true, Statement-2 false; (D) Statement-1 false, Statement-2 true.
Statement-1: Solubility of AgCN in acidic solution is greater than that in pure water.
Statement-2: Solubility equilibria of AgCN in water is shifted in forward direction due to formation of HCN.

Solution. Answer (A). H+ combines with CN- to give weak acid HCN, lowering [CN-] and shifting AgCN ⇌ Ag+ + CN- forward. Statement-2 is the explanation.

Teacher's Note: Salts of weak acid anions dissolve more in acid.

Exam Note: Anion protonation raises solubility.

Subjective Problems

Subjective, Question 1. Calculate pOH of 0.1 M aq. solution of weak base BOH (Kb = 10-7) at 25°C.

Solution. Answer (key): 4. [OH-] = √(KbC) = √(10-7 × 0.1) = 10-4 M, so pOH = 4.

Teacher's Note: Weak base: [OH-] equals root of Kb times C.

Exam Note: Quote pOH, not pH.

Subjective, Question 2. pH of 0.01 M aq. solution of HA is 4. Find the value of pKa of HA at 25°C.

Solution. Answer (key): 6. [H+] = 10-4 = √(Ka × 0.01), so Ka = 10-8/0.01 = 10-6 and pKa = 6.

Teacher's Note: Square [H+] and divide by C to get Ka.

Exam Note: Ka equals [H+] squared over C.

Subjective, Question 3. Calculate approximate pH of 10-10 M NaOH at 25°C.

Solution. Answer (key): 7. Water supplies 10-7 M OH-, which swamps 10-10 M, so [OH-] ≈ 1.001 × 10-7 M and pH ≈ 7.

Teacher's Note: At extreme dilution water dominates; ignore the base.

Exam Note: Very dilute base cannot give pH 10.

Subjective, Question 4. Calculate pH of a resultant solution of 25 mL of 0.1 M HCl, 50 mL of 0.02 M HNO3 and 25 mL of 0.1 M NaOH.

Solution. Answer (key): 2. H+ = 2.5 + 1.0 = 3.5 mmol; OH- = 2.5 mmol; excess H+ = 1.0 mmol in 100 mL = 0.01 M; pH = 2.

Teacher's Note: Net mmol of H+ over total volume.

Exam Note: Add all volumes for the final concentration.

Subjective, Question 5. Calculate pH of a resultant solution of 0.1 M HA (Ka = 10-6) and 0.45 M HB (Ka = 2 × 10-6) at 25°C.

Solution. Answer (key): 3. For two weak acids, [H+] = √(Ka1C1 + Ka2C2) = √(10-7 + 9 × 10-7) = 10-3 M; pH = 3.

Teacher's Note: Add contributions Ka C of each weak acid under the root.

Exam Note: Mixture of weak acids: sum the Ka C terms.

Subjective, Question 6. 0.16 g N2H4 (Kb = 4 × 10-6) are dissolved in water and the total volume made up to 500 mL. Calculate the percentage of N2H4 that has reacted with water in this solution.

Solution. Answer (key): 2. Moles = 0.16/32 = 0.005; C = 0.005/0.5 = 0.01 M. α = √(Kb/C) = √(4 × 10-6/0.01) = 0.02, i.e. 2%.

Teacher's Note: Compute molarity from M(N2H4) = 32 first, then alpha.

Exam Note: Use molar mass 32 for hydrazine.

Subjective, Question 7. Calculate pH of a buffer solution that contains 0.1 M NH4OH (Kb = 10-5) and 0.1 M NH4Cl.

Solution. Answer (key): 9. pOH = pKb + log([salt]/[base]) = 5 + log 1 = 5, so pH = 14 - 5 = 9.

Teacher's Note: Equal base and salt gives pOH equal to pKb.

Exam Note: Remember to convert pOH to pH.

Subjective, Question 8. Calculate the ratio of sodium formate and formic acid (Ka = 2 × 10-4) in a buffer solution of pH = 4.3.

Solution. Answer (key): 4. pKa = 4 - log 2 = 3.70. pH = pKa + log(salt/acid), so log ratio = 4.3 - 3.7 = 0.6 and ratio = 3.98 ≈ 4.

Teacher's Note: Henderson equation solved for salt to acid ratio.

Exam Note: Convert Ka to pKa carefully.

Subjective, Question 9. What is the pOH of 0.1 KB (salt of weak acid and strong base) at 25°C? (Given: pKb of B- = 7)

Solution. Answer (key): 4. B- hydrolyses as a base: pOH = ½(pKb - log C) = ½(7 + 1) = 4.

Teacher's Note: Anion of weak acid: pOH equals half of pKb minus log C.

Exam Note: Use pKb of the anion directly.

Subjective, Question 10. A certain weak acid has Ka = 10-5. If the equilibrium constant for its reaction with a strong base is represented as y × 1010 then find the value of y.

Solution. Corrected: y = 0.1. For HA + OH- → A- + H2O, K = Ka/Kw = 10-5/10-14 = 109 = 0.1 × 1010. The book key prints 9, which is the exponent (K = 109), not y as the question is worded. Human check advised.

Teacher's Note: Reaction with strong base: K equals Ka over Kw.

Exam Note: Express K in the asked form.

Subjective, Question 11. If solubility of AgCl in 0.2 M solution of AgNO3 is represented as y × 10-10 then find the value of y. (Given: Ksp(AgCl) = 10-10)

Solution. Answer (key): 5. Common ion Ag+ = 0.2 M, so s = Ksp/0.2 = 5 × 10-10 M, y = 5.

Teacher's Note: Common ion swamps Ag+, so s equals Ksp over 0.2.

Exam Note: Ignore s next to 0.2 M.

Subjective, Question 12. When one litre of a saturated solution of PbCl2 (mol. wt. = 278) is evaporated, the residue is found to weigh 2.78 g. If Ksp of PbCl2 is represented as y × 10-6 then find the value of y.

Solution. Answer (key): 4. s = 2.78/278 = 0.01 M. Ksp = 4s3 = 4 × 10-6, so y = 4.

Teacher's Note: Solubility in mol/L then Ksp equals 4 s cubed.

Exam Note: PbCl2 is an AB2 type salt.

Subjective, Question 13. A solution is saturated in SrCO3 and SrF2. The CO32- was found to be 10-3 mol/L. If the concentration of F- in solution is represented as y × 10-2 M then what is the value of y? [Given: Ksp(SrCO3) = 2.5 × 10-10; Ksp(SrF2) = 10-10]

Solution. Answer (key): 2. [Sr2+] is common: [Sr2+] = Ksp(SrCO3)/[CO32-] = 2.5 × 10-10/10-3 = 2.5 × 10-7 M. Then [F-]2 = 10-10/2.5 × 10-7 = 4 × 10-4, [F-] = 2 × 10-2 M, y = 2.

Teacher's Note: Common Sr2+ links both Ksp expressions.

Exam Note: Find shared ion concentration first.

Subjective, Question 14. 10 mL of H2A (weak diprotic acid) solution is titrated against 0.1 M NaOH. pH of the solution is plotted against volume of strong base added and following observation is made (first equivalence at 20 mL, second at 40 mL). If pH of the solution at first equivalence point is pH1 and at second equivalence point is pH2. Calculate the value of (pH2 - pH1) at 25°C. Given: for H2A, pKa1 = 4.6 and pKa2 = 8, log 25 = 1.4
Figure (described in words): pH versus volume of strong base, with steep rises marked at 20 mL and 40 mL.

Solution. Answer (key): 4. First equivalence: HA- only, pH1 = ½(pKa1 + pKa2) = ½(4.6 + 8) = 6.3. Acid concentration: 10 × N = 0.1 × 20, N = 0.2 M, i.e. 2 mmol H2A. Second equivalence: 2 mmol Na2A in 50 mL, C = 1/25 = 0.04 M; pH2 = ½(pKw + pKa2 + log C) = ½(14 + 8 - 1.4) = 10.3. pH2 - pH1 = 10.3 - 6.3 = 4.

Teacher's Note: First equivalence uses amphiprotic formula; second uses salt hydrolysis formula.

Exam Note: Total volume at second equivalence is 50 mL.

Subjective, Question 15. Amongst the following, the total number of compounds whose aqueous solution turns red litmus paper blue is:
NaCN, KCl, CH3COONH4, NaH2PO4, ZnCl2, Na3PO4, Fe(NO3)3, Na2CO3, NH4Cl, NaHCO3, Na2C2O4, Na2HPO4
Given: H3PO4 Ka1 = 10-3, Ka2 = 10-8, Ka3 = 10-12; H2CO3 Ka1 = 10-6, Ka2 = 10-11; H2C2O4 Ka1 = 10-2, Ka2 = 10-5.

Solution. Answer (key): 6. Basic salts: NaCN, Na3PO4, Na2CO3, NaHCO3 (Kb = 10-8 > Ka2 = 10-11), Na2C2O4 and Na2HPO4 (Kb = 10-6 > Ka3 = 10-12). Acidic: NaH2PO4, ZnCl2, Fe(NO3)3, NH4Cl; neutral: KCl, CH3COONH4.

Teacher's Note: Basic salt turns red litmus blue; compare Ka and Kb for amphiprotic anions.

Exam Note: Compare Kb with Ka for HCO3- and HPO4^2-.

Step-by-Step Narendra Awasthi Solutions for JEE Math

Download Narendra Awasthi Solutions for JEE

Review detailed solutions for JEE Mathematics. The Narendra Awasthi Solutions Physical Chemistry Chapter 6 Ionic Equilibrium Part 2 PDF provides comprehensive answers mapped to standard Narendra Awasthi Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with Narendra Awasthi Solutions

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these Narendra Awasthi Solutions for JEE Chemistry?

They are chapter-wise solved questions from the Narendra Awasthi book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the Narendra Awasthi JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these Narendra Awasthi solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising Narendra Awasthi JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.