MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 6 Alcohal Ethers And Epoxides Part 2

Download JEE Chemistry MS Chauhan Textbook Solutions: Chapter 06 Alcohal Ethers And Epoxides

Access comprehensive textbook solutions for Chapter 06 Alcohal Ethers And Epoxides using the MS Chauhan reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Access MS Chauhan Textbook Answers and Solutions

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 6 Alcohols, Ethers and Epoxides - Level 1 Q94-Q157 and Level 2 (Part 2)

Level 1 (continued) - Objective Questions

Question 94. In the acid-catalysed reaction R-OH + HO-C(=O)-C6H4-NO2(p) → R-O-C(=O)-C6H4-NO2(p), the fastest rate is when R is:
(a) CH3-
(b) CH3CH2-
(c) (CH3)2CH-
(d) (CH3)3C-

Solution. Answer: (a). In Fischer esterification the alcohol oxygen attacks the protonated acid, so crowding around the OH slows the reaction. Rate order: CH3OH > 1° > 2° > 3°. Methyl is least hindered.

Teacher's Note: Esterification rate falls as the alcohol becomes more crowded: methyl, 1°, 2°, 3°.

Exam Note: Methanol reacts fastest in esterification.

Question 95. Select the correct statement.
(a) Solvolysis of (CH3)2C=CH-CH2-Cl in ethanol is over 6000 times faster than that of an alkyl chloride (25 °C)
(b) CH3-CH=CH-CH2-OH with HBr gives a mixture of 1-bromo-2-butene and 3-bromo-1-butene
(c) A solution of 3-buten-2-ol in aqueous sulphuric acid on standing for one week contains both 3-buten-2-ol and 2-buten-1-ol
(d) All of these

Solution. Answer: (d). All three statements are true. Each rests on the resonance-stabilised allylic carbocation: (a) the dimethylallyl cation is very stable, so solvolysis is very fast; (b) the allylic cation CH3-CH+-CH=CH2 ↔ CH3-CH=CH-CH2+ is attacked by Br- at both ends; (c) in aqueous acid the same cation is formed and water adds at either end, so the two isomeric allylic alcohols interconvert.

Teacher's Note: Allylic cations are delocalised over two carbons, giving rearranged mixtures and fast SN1 rates.

Exam Note: Allylic substrates: both products appear via the same cation.

Question 96. The transformation 1-(hydroxymethyl)cyclohexan-1-ol (a cyclohexane ring carbon bearing both OH and CH2-OH) → cyclohexanol can be carried out by:
(a) H+/Δ, Zn(Hg), HCl
(b) HIO4, LiAlH4
(c) HIO4, H+/Δ
(d) H+/Δ, HIO4

Solution. Answer: (b). The starting material is a vicinal (1,2) diol. HIO4 cleaves the C-C bond between the two carbinol carbons to give cyclohexanone + HCHO. LiAlH4 then reduces the ketone to cyclohexanol.

Teacher's Note: Periodate splits a 1,2-diol into carbonyls; hydride then reduces the ketone to the alcohol.

Exam Note: Diol, then HIO4, then LiAlH4.

Question 97. H2C=CH-CH2-CH2-CH(OH)-CH3 —(SOCl2/pyridine)→ (A) —(O3/Zn, H2O)→ (B) —(NaBH4)→ (C). Compound (C) is:
(a) CH3-CH(OH)-CH2-CH2-CH(Cl)-CH3
(b) HOCH2-CH2-CH2-CH2-CH2-CH2-Cl
(c) HO-CH2-CH2-CH2-CH(Cl)-CH3
(d) HO-CH2-CH2-CH(Cl)-CH2-CH3

Solution. Answer: (c). SOCl2/pyridine replaces the OH by Cl: (A) = CH2=CH-CH2CH2-CHCl-CH3. Ozonolysis with Zn/H2O cuts the C=C to the aldehyde: (B) = OHC-CH2CH2-CHCl-CH3. NaBH4 reduces only the CHO: (C) = HO-CH2CH2CH2-CHCl-CH3 (4-chloropentan-1-ol).

Teacher's Note: Track each reagent: SOCl2 swaps OH for Cl, reductive ozonolysis gives CHO, NaBH4 leaves C-Cl alone.

Exam Note: Zn ozonolysis gives aldehyde; NaBH4 spares alkyl chloride.

Question 98. Iodoform can be obtained on warming NaOH and iodine with:
(a) CH3CH2CH(OH)CH3
(b) (CH3)2CH-C(=O)-C2H5
(c) CH3-C(=O)-OCH3
(d) (CH3)2CH-CH2OH

Solution. Answer: (a). The iodoform test needs CH3-CO- or CH3-CH(OH)- attached to C/H. Butan-2-ol is oxidised by I2/NaOH to butan-2-one (a methyl ketone), which then gives CHI3. (b) has no methyl ketone group, (c) is an ester, (d) is a primary alcohol without the CH3CH(OH)- unit.

Teacher's Note: Look for CH3CO- or CH3CH(OH)-; esters and other alcohols fail.

Exam Note: Iodoform: methyl ketone or methyl carbinol only.

Question 99. Which of these is a reducing agent?
(a) CrO3/H+
(b) KMnO4
(c) LiAlH4
(d) O3

Solution. Answer: (c). LiAlH4 is a source of hydride (H-) and reduces carbonyl compounds. CrO3/H+, KMnO4 and O3 are oxidising agents.

Teacher's Note: LiAlH4 donates hydride; chromium(VI), permanganate and ozone take electrons.

Exam Note: LiAlH4 is the hydride reducing agent.

Question 100. Methylenecyclohexane (cyclohexane ring with an exocyclic =CH2) —(i) (BH3)2, (ii) H2O2/OH-→ (P). Product (P) is:
(a) cyclohexylmethanol (ring-CH2OH)
(b) 1-methylcyclohexan-1-ol
(c) cyclohexanone
(d) cyclohexanecarboxylic acid

Solution. Answer: (a). Hydroboration-oxidation adds H-OH in an anti-Markovnikov way: boron goes to the less substituted =CH2 carbon, so the OH ends up on the CH2 carbon, giving cyclohexylmethanol (a primary alcohol).

Teacher's Note: Hydroboration-oxidation puts OH on the less substituted alkene carbon.

Exam Note: Anti-Markovnikov hydration gives the primary alcohol.

Question 101. (CH3)3C-OH (tert-butyl alcohol) —(Na2Cr2O7, cool)→ (P). Product (P) is:
(a) CH3-C(CH3)=CH2
(b) (CH3)2CH-CH3
(c) (CH3)3C-O-C(CH3)3
(d) No reaction

Solution. Answer: (d). A tertiary alcohol has no hydrogen on the carbinol carbon, so it cannot be oxidised by dichromate in the cold. No elimination or ether formation occurs under these conditions.

Teacher's Note: Oxidation of an alcohol needs an H on the carbinol carbon; tertiary alcohols lack it.

Exam Note: Tertiary alcohols resist mild oxidation.

Question 102. 1,2,3-Butanetriol undergoes oxidative cleavage with HIO4. During this process:
(a) 1 equivalent of HIO4 is consumed and HCO2H and CH3-C(=O)-CO2H are formed
(b) 2 equivalents of HIO4 are consumed and HCO2H, HCH=O and CH3-CH=O are formed
(c) 3 equivalents of HIO4 are consumed and HCO2H (2 eq.) and 1 eq. of CH3CO2H are formed
(d) 2 equivalents of HIO4 are consumed and 2 eq. of HCO2H and 1 eq. of CH3CH=O are formed

Solution. Answer: (b). HOCH2-CH(OH)-CH(OH)-CH3 has three adjacent carbinol carbons, so two C-C bonds are cleaved (2 equivalents of HIO4). C-1 becomes HCHO, the middle carbon C-2 (an H and OH carbon on both sides) becomes HCO2H, and C-4 with C-3 becomes CH3CHO.

Teacher's Note: Count adjacent OH-bearing carbons: n carbons need n-1 equivalents; middle carbon becomes formic acid.

Exam Note: Two cleavages: HCHO, HCO2H, CH3CHO.

Question 103. Methyl 1-acetoxy-2-methylcyclohex-3-ene-1-carboxylate (a ring quaternary carbon bearing CH3-C(=O)-O- and -CO-OCH3; the ester oxygen of the acetoxy group is faint in the scan) —(i) LiAlH4, (ii) H2O→ (A) (96%). Product (A) is:
(a) a ring carbon bearing two OH groups (gem-diol), ring alkene retained
(b) ring carbon bearing OH and CH2OH, with the ring C=C in a different position from the substrate
(c) ring carbon bearing OH and CH2OH, with the ring C=C and CH3 as in the substrate
(d) 2-methylcyclohex-3-en-1-one

Solution. Answer: (c). LiAlH4 reduces the methyl ester to CH2OH and cleaves the acetate ester to free the tertiary OH (the acetyl part leaves as ethanol). The ring C=C is not touched. (A) = 1-(hydroxymethyl)-2-methylcyclohex-3-en-1-ol.

Teacher's Note: LiAlH4 reduces esters to alcohols and also cleaves acetate esters; isolated C=C survives.

Exam Note: Hydride attacks both ester groups, not the alkene.

Question 104. R-C(=O)-O-R' + R''OH ⇌ R-C(=O)-O-R'' + R'OH (H+). This reaction is/an example of:
(a) esterification
(b) saponification
(c) trans-esterification
(d) hydrolysis

Solution. Answer: (c). One ester is converted into another by exchanging the alkoxy group (OR') with a different alcohol (R''OH). This alcohol-for-alcohol exchange is trans-esterification.

Teacher's Note: An ester plus an alcohol giving a different ester is trans-esterification.

Exam Note: Ester to ester via alcohol exchange.

Question 105. (CH3)2CHCH2OH —PBr3→ —Mg→ —(ethylene oxide)→ —H3O+→ ? The major organic product is:
(a) (CH3)2CH-CH(OH)-CH2CH3
(b) (CH3)2CH-CH2-CH2-OH
(c) (CH3)2CH-CH2-CH(OH)-CH3
(d) (CH3)2CH-CH2-CH2-CH2-OH

Solution. Answer: (d). PBr3 gives isobutyl bromide; Mg gives the Grignard reagent (CH3)2CHCH2MgBr; this attacks ethylene oxide and adds a CH2CH2OH unit (two carbons). Acid work-up gives (CH3)2CH-CH2-CH2-CH2OH (4-methylpentan-1-ol).

Teacher's Note: Grignard plus ethylene oxide lengthens the chain by two carbons and gives a primary alcohol.

Exam Note: Ethylene oxide: Grignard adds -CH2CH2OH.

Question 106. The product of the reaction of 1,1'-dihydroxybi(cyclopentyl) (two cyclopentane rings joined at C-1, each C-1 bearing OH) with H+/Δ is:
(a) bicyclopentylidene (tetra-substituted alkene joining the two rings)
(b) the spiro epoxide of the two rings
(c) spiro[4.5]decan-6-one (cyclopentane spiro-fused to a cyclohexanone, C=O in the six-membered ring next to the spiro carbon)
(d) a spiro ketone with the C=O in the five-membered ring

Solution. Answer: (c). This is a pinacol rearrangement with ring expansion. Protonation and loss of water from one carbinol carbon gives a cation; a ring C-C bond of the other ring migrates to it, expanding that ring from five to six members, and the cation next to OH becomes C=O. The result is spiro[4.5]decan-6-one.

Teacher's Note: Pinacol shift of a ring bond expands the ring (5 to 6) and gives a spiro ketone.

Exam Note: Pinacol with rings: ring expansion, spiro ketone.

Question 107. Glyceraldehyde, OHC-CH(OH)-CH2OH, with 2 HIO4. Products obtained are:
(a) HCHO, HCO2H
(b) HCHO, 2 HCO2H
(c) CO2, 2 HCO2H
(d) CO2, HCHO, HCO2H

Solution. Answer: (b). Two C-C bonds are cleaved: CHO becomes HCO2H, the middle CH(OH) becomes HCO2H, and the terminal CH2OH becomes HCHO. Products: HCHO + 2 HCO2H.

Teacher's Note: Terminal CH2OH gives HCHO; every CHO and CHOH gives formic acid.

Exam Note: Aldose plus HIO4: formic acid and formaldehyde.

Question 108. An aldopentose, OHC-(CH-OH)3-CH2OH, + 4 HIO4 → products obtained are:
(a) 4 HCO2H, HCHO
(b) 4 CH2O, HCO2H
(c) CO2, 4 HCHO
(d) CO2, 3 HCO2H, HCHO

Solution. Answer: (a). Four C-C bonds are cleaved. C-1 (CHO) and the three CH(OH) carbons each end as HCO2H (4 in all), and the terminal CH2OH gives HCHO.

Teacher's Note: Pentose: four formic acid from C1-C4 and one formaldehyde from the CH2OH end.

Exam Note: n carbons need n-1 HIO4; ends decide HCHO.

Question 109. (i) OHC-(CH-OH)3-CH2OH + 4 HIO4 → products; (ii) CH2OH-(CH-OH)4-CH2OH + 5 HIO4 → products. Ratio of moles of formic acid obtained in reaction (i) and reaction (ii) is:
(a) 3/4
(b) 4/5
(c) 1
(d) 5/4

Solution. Answer: (c). (i) The aldopentose gives 4 HCO2H (C-1 to C-4) + 1 HCHO. (ii) The hexitol gives 4 HCO2H (the four internal CH(OH) carbons) + 2 HCHO. Ratio = 4/4 = 1.

Teacher's Note: Only CHO and internal CHOH carbons give formic acid; CH2OH ends give formaldehyde.

Exam Note: Count carbons that are not CH2OH ends.

Question 110. Which of the following compounds gives 2 HCHO, CO2, HCO2H when oxidised by periodic acid?
(a) CH2OH-(CH-OH)2-CH2OH
(b) OHC-(CH-OH)2-CH2OH
(c) CH2OH-C(=O)-(CH-OH)2-CH2OH
(d) OHC-C(=O)-CH(OH)-CH2OH

Solution. Answer (from key): (d). Corrected: working each option by periodic-acid cleavage (CH2OH gives HCHO, CH(OH) and CHO give HCO2H, C=O gives CO2): (a) 2 HCHO + 2 HCO2H; (b) HCHO + 3 HCO2H; (c) 2 HCHO + CO2 + 2 HCO2H; (d) HCHO + CO2 + 2 HCO2H. None gives exactly 2 HCHO + CO2 + 1 HCO2H; option (c) is the nearest (it has 2 HCHO and 1 CO2), and the printed question probably lost a '2' before HCO2H. The key's (d) has only one HCHO. So the best answer is (c). This item needs a human check.

Teacher's Note: Assign products by carbon type: CH2OH to HCHO, C=O to CO2, CH(OH)/CHO to formic acid.

Exam Note: Printed question or key has a slip; checked by counting.

Question 111. Hydration of 3-phenylbut-1-ene in dil. H2SO4 will give mainly:
(a) 3-phenylbutan-1-ol
(b) 3-phenylbutan-2-ol
(c) 2-phenylbutan-2-ol
(d) 2-phenylbutan-1-ol

Solution. Answer: (c). H+ adds to the terminal CH2 (Markovnikov) to give the 2° cation CH3-CH+-CH(CH3)Ph. A 1,2-hydride shift then gives the more stable tertiary benzylic cation CH3CH2-C+(CH3)Ph, which is trapped by water to give 2-phenylbutan-2-ol.

Teacher's Note: Secondary cation shifts hydride to become tertiary benzylic; water then adds there.

Exam Note: Acid hydration: look for hydride shift to a benzylic cation.

Question 112. Decarboxylation of sodium salicylate with soda lime forms:
(a) salicylic acid
(b) phenol
(c) benzene
(d) None of these

Solution. Answer: (b). Soda lime removes the -COONa group as CO2 (as Na2CO3) and replaces it by H. Sodium salicylate (2-HO-C6H4-COONa) therefore gives phenol.

Teacher's Note: Soda lime replaces COONa by H; the OH group stays, so phenol results.

Exam Note: Decarboxylation of salicylate gives phenol.

Question 113. A methyl glycoside (a six-membered ring containing O, with OCH3 on the carbon next to the ring oxygen, three adjacent CH-OH groups, and a CH2OH on the carbon on the other side of the ring oxygen) + x HIO4. What is the maximum value of x?
(a) 1
(b) 2
(c) 3
(d) 4

Solution. Answer: (b). Only the three adjacent CH-OH carbons form a vicinal triol, so two C-C bonds are cleaved: x = 2. The CH2OH carbon is next to the ring-oxygen carbon (no free OH), and the OCH3 carbon is an acetal, so neither takes up periodate.

Teacher's Note: HIO4 cleaves only bonds between carbons that both carry free OH; three such carbons need two.

Exam Note: Triol: two equivalents of periodate.

Question 114. 2-(1-Ethoxycarbonylethyl)cyclohexanone (ring ketone with CH(CH3)-CO2Et on the carbon next to C=O) —(HOCH2CH2OH, H+)→ (A) —LiAlH4→ (B) —H3O+→ (C). Product C is:
(a) ring ketone with CH2-CH(OH)-CH3 on the adjacent carbon
(b) ring ketone with CH(CH3)-CH2-OH on the adjacent carbon
(c) ring ketone with C(CH3)2-OH on the adjacent carbon
(d) ring ketone with CH2-CH2-OH on the adjacent carbon

Solution. Answer: (b). Ethylene glycol/H+ protects the ketone as a cyclic ketal (A). LiAlH4 reduces the ester to a primary alcohol, -CH(CH3)-CH2OH (B). Aqueous acid removes the ketal and restores the ketone (C).

Teacher's Note: Protect the ketone as a ketal so hydride reduces only the ester, then deprotect.

Exam Note: Protect, reduce, deprotect: a classic selectivity trick.

Question 115. (A) + HOCH2-CH2OH —(pyridine)→ ethylene carbonate (a five-membered ring O-CH2-CH2-O-C(=O)). Reactant A is:
(a) CH3-C(=O)-CH3
(b) COCl2
(c) CH3-C(=O)-Cl
(d) CH3-C(=O)-OEt

Solution. Answer: (b). The ring carbonate C(=O)(O-)2 needs a one-carbon carbonyl unit carrying two leaving groups: phosgene, COCl2. Both OH groups of ethylene glycol displace Cl (pyridine takes up the HCl).

Teacher's Note: A cyclic carbonate comes from a diol and phosgene (COCl2) with a base.

Exam Note: Diol plus phosgene gives cyclic carbonate.

Question 116. Conversion of methyl 4-oxocyclohexanecarboxylate to 4-oxocyclohexanecarbaldehyde through four steps: ketone → cyclic ketal (A) → (B) ketal-ester → (C) ketal-CH2OH → ketal-CHO → (D) ketone-CHO. Identify the correct combination:
(a) (A) = HOCH2CH2SH
(b) (B) = NaBH4
(c) (C) = KMnO4
(d) (D) = H3O+

Solution. Answer: (d). (A) must be ethylene glycol/H+ (the thiol would give a thio-ketal, not the oxygen ketal drawn). (B) must be LiAlH4, since NaBH4 does not reduce esters. (C) must be a mild oxidant such as PCC, since KMnO4 would over-oxidise the CH2OH to an acid. (D) H3O+ removes the ketal.

Teacher's Note: Test each reagent: NaBH4 skips esters; KMnO4 over-oxidises; aqueous acid removes ketals.

Exam Note: Check selectivity of each reagent, not just reactivity.

Question 117. In the Liebermann nitroso reaction, the sequential changes in colour of phenol occur as:
(a) Brown or red → green → deep blue
(b) Red → deep blue
(c) Red → green → white
(d) White → red → green

Solution. Answer: (a). Corrected: the book's key gives (b). In the standard description of Liebermann's nitroso test, phenol with NaNO2 and conc. H2SO4 first gives a brown/red colour, which turns green, and finally deep blue (on making alkaline). Option (a) is the full sequence given in textbooks. This item needs a human check.

Teacher's Note: Liebermann test: nitrosophenol then indophenol-type dye; colour sequence brown/red, green, deep blue.

Exam Note: Memorise: brown/red, green, deep blue.

Question 118. Ethanol reacts with PCl5 to give A, POCl3 and HCl. A reacts with dry Ag2O to form B (major product) and AgCl. A and B respectively are:
(a) C2H5Cl and C2H5OC2H5
(b) C2H4 and C2H5OC2H5
(c) C2H6 and C2H5OC2H5
(d) C2H6 and C2H5NO2

Solution. Answer: (a). C2H5OH + PCl5 → C2H5Cl (A) + POCl3 + HCl. Then 2 C2H5Cl + Ag2O → C2H5-O-C2H5 (B) + 2 AgCl (a Williamson-type ether synthesis with dry silver oxide).

Teacher's Note: PCl5 turns ROH into RCl; dry Ag2O converts two RCl into an ether.

Exam Note: Dry Ag2O with alkyl halide gives ether.

Question 119. CH3-(CH2)3-OH —(CH3SO2Cl, Et3N)→ (A) —(K14CN)→ (B) —H3O+→ (C). Product (C) is:
(a) CH3-(CH2)3-CO2H
(b) CH3-(CH2)3-14CO2H
(c) CH3-CO2H
(d) an acetic-acid-type structure with the label on its carboxyl-type carbon (C-14), CH3-C(=O)-O-H

Solution. Answer: (b). The mesylate (A) = CH3(CH2)3-OMs is an excellent leaving group; 14CN- displaces it (SN2) to give CH3(CH2)3-14CN (B). Acid hydrolysis converts the nitrile carbon into the carboxyl carbon: CH3(CH2)3-14CO2H.

Teacher's Note: Mesylation activates OH; cyanide extends the chain by one carbon, which becomes the labelled COOH carbon.

Exam Note: Nitrile carbon becomes the carboxyl carbon.

Question 120. Choose the best synthesis of phenyl n-propyl ether.
(a) phenol: 1. Na metal; 2. CH3CH2CH2Br in a polar aprotic solvent
(b) propan-1-ol: 1. Na metal; 2. Ph-Br
(c) anisole (methoxybenzene): 1. Na metal; 2. CH3CH2-Br
(d) 4-propylphenol: 1. Na metal; 2. HBr

Solution. Answer: (a). This is a Williamson synthesis: sodium phenoxide (a good nucleophile) attacks the unhindered primary alkyl bromide by SN2. (b) fails because aryl bromides do not undergo SN2; (c) and (d) start from the wrong substrates.

Teacher's Note: Williamson ether: nucleophile is the alkoxide or phenoxide; the halide must be primary alkyl, not aryl.

Exam Note: Aryl halides cannot be SN2 substrates.

Question 121. 3-(Hydroxymethyl)cyclohexan-1-ol (ring with OH at C-1 and CH2OH at C-3) —(Na2Cr2O7/H2SO4)→ The product obtained is:
(a) 3-oxocyclohexanecarboxylic acid
(b) 3-oxocyclohexanecarbaldehyde
(c) 3-oxocyclohexyl-acetic acid type (ring ketone with CH2CO2H)
(d) None of these

Solution. Answer: (a). Hot acidic dichromate is a strong oxidant: the secondary OH becomes a ketone and the primary CH2OH is taken all the way to the carboxylic acid. Product: 3-oxocyclohexane-1-carboxylic acid.

Teacher's Note: Acidic dichromate takes primary alcohols to acids and secondary alcohols to ketones.

Exam Note: Primary alcohol goes to acid, not aldehyde, with dichromate.

Question 122. What is true for the equilibrium CH3COOH + CH3OH ⇌ CH3COOCH3 + H2O (catalyst)?
(a) Using equimolar quantities of CH3OH and CH3COOH gives the greatest yield of ester at equilibrium
(b) Removal of water will increase the amount of ester at equilibrium
(c) Addition of CH3COOCH3 will cause the formation of an equal number of moles of water
(d) Application of pressure increases the amount of ester at equilibrium

Solution. Answer: (b). By Le Chatelier's principle, removing a product (water) shifts the equilibrium to the right and raises the ester yield. (a) is wrong: an excess of one reactant gives a higher yield. (c) adding ester shifts the equilibrium left. (d) There is no change in moles of gas, so pressure has no effect.

Teacher's Note: Le Chatelier: remove water or add excess reagent to push esterification forward.

Exam Note: Remove water to improve ester yield.

Question 123. PCC (pyridinium chlorochromate) is a good reagent for which of the following transformations?
(a) cyclohexanone → cyclohexanol
(b) cyclohexanol → cyclohexanone
(c) cyclohexanol → chlorocyclohexane
(d) cyclohexanone → hexanedioic (adipic) acid

Solution. Answer: (b). PCC is a mild oxidising agent that oxidises primary alcohols to aldehydes and secondary alcohols to ketones. Here cyclohexanol is oxidised to cyclohexanone. It does not reduce ketones, chlorinate alcohols, or cleave rings.

Teacher's Note: PCC: mild oxidant, stops at aldehyde or ketone; neither reduces nor chlorinates.

Exam Note: PCC oxidises alcohols without over-oxidation.

Question 124. How many primary alcohols (including stereoisomers) are possible with formula C5H12O?
(a) Two
(b) Three
(c) Four
(d) Five

Solution. Answer: (d). Primary alcohols C5H11OH: pentan-1-ol; 3-methylbutan-1-ol; 2,2-dimethylpropan-1-ol; and 2-methylbutan-1-ol, which has a chiral centre and gives two enantiomers (R and S). Total = 1 + 1 + 1 + 2 = 5.

Teacher's Note: List the four primary structures and add one extra for the chiral 2-methylbutan-1-ol.

Exam Note: Do not forget enantiomers when asked to include stereoisomers.

Question 125. 1-Phenylethanol can be prepared by the reaction of benzaldehyde with the product obtained in the reaction between:
(a) CH3I and Mg
(b) C2H5I and Mg
(c) CH3Br and AlCl3
(d) CH3OH and ZnCl2

Solution. Answer: (a). CH3I + Mg gives CH3MgI. Adding this to PhCHO gives PhCH(CH3)-OMgI, which on hydrolysis gives PhCH(OH)CH3 (1-phenylethanol). C2H5MgI would give 1-phenylpropan-1-ol.

Teacher's Note: Grignard adds its R group to the aldehyde carbon, giving a secondary alcohol.

Exam Note: Aldehyde plus RMgX gives secondary alcohol.

Question 126. 0.092 g of a compound with molecular formula C3H8O3 on reaction with an excess of CH3MgI gives 67.00 mL of methane at STP. The number of active hydrogen atoms present in a molecule of the compound is:
(a) one
(b) two
(c) three
(d) four

Solution. Answer: (c). Molar mass of C3H8O3 = 92 g/mol, so 0.092 g = 1.0 × 10-3 mol. CH4 = 67.00 mL / 22400 mL/mol = 2.99 × 10-3 mol ≈ 3 × 10-3 mol. Each active H gives one CH4, so active H = 3 (glycerol, three OH groups).

Teacher's Note: Active H per molecule equals moles of CH4 divided by moles of compound.

Exam Note: Zerewitinoff method: moles methane per mole compound.

Question 127. Migratory aptitude of the following aryl groups in decreasing order is: (a) p-methoxyphenyl (b) phenyl (c) p-chlorophenyl (d) p-methylphenyl
(a) a > c > b > d
(b) a > d > b > c
(c) a > d > c > b
(d) b > c > a > b

Solution. Answer: (b). In a 1,2-shift the more electron-rich aryl group migrates more easily. Electron donors raise the aptitude (OMe > Me), the unsubstituted phenyl is next, and the electron-withdrawing Cl lowers it. Order: a > d > b > c.

Teacher's Note: More electron-rich aryl groups migrate better: OMe, Me, H, then Cl.

Exam Note: Aryl migration order follows electron-donating power.

Question 128. The major product formed when a 2-alkoxytetrahydropyran (THP ether of RCH2OH, ring O next to the carbon bearing O-CH2R) reacts with H3O+ is:
(a) 3,4-dihydro-2H-pyran + RCH2OH
(b) 5-hydroxy-tetrahydropyranyl ether, ring retained with an OH
(c) HO-CH2CH2CH2CH2-CHO (5-hydroxypentanal) + RCH2OH
(d) a hemiacetal diol product with ring retained

Solution. Answer: (c). The THP ether is an acetal. Aqueous acid hydrolyses it: the acetal carbon becomes a hemiacetal, which opens to the hydroxy-aldehyde HO-(CH2)4-CHO (5-hydroxypentanal, in equilibrium with its cyclic hemiacetal), releasing RCH2OH.

Teacher's Note: Acetals (such as THP ethers) hydrolyse in aqueous acid back to carbonyl and alcohol.

Exam Note: THP protecting group: removed by aqueous acid.

Question 129. Reaction of (R)-2-butanol with p-toluenesulphonyl chloride in pyridine, then LiBr, gives:
(a) R-2-butyl bromide
(b) S-2-butyl tosylate
(c) R-2-butyl tosylate
(d) S-2-butyl bromide

Solution. Answer: (d). Tosylation occurs at oxygen, so the C-O bond to the stereocentre is not broken: the product is (R)-2-butyl tosylate (retention). Br- then displaces tosylate by SN2 with inversion of configuration, giving (S)-2-bromobutane.

Teacher's Note: Tosylation retains configuration; the SN2 step with bromide then inverts it.

Exam Note: Two steps: retention then inversion gives net inversion.

Question 130. Optically active 2-octanol rapidly loses its optical activity when exposed to:
(a) dilute acid
(b) dilute base
(c) light
(d) humidity

Solution. Answer: (a). In dilute acid the OH is protonated and can leave, giving the planar secondary carbocation (reversibly, followed by attack of water). Attack from either face gives both enantiomers, so the sample racemises. Dilute base, light or humidity do not ionise the alcohol.

Teacher's Note: Acid ionises the alcohol to a planar carbocation, giving racemisation.

Exam Note: Racemisation through SN1-type ionisation in acid.

Question 131. If (±)-2-methylbutanoic acid were esterified with (±)-2-butanol, how many optically active compounds would be present in the final equilibrium reaction mixture?
(a) 2
(b) 3
(c) 4
(d) 6

Solution. Answer: (c). The ester sec-butyl 2-methylbutanoate has two stereocentres, giving four stereoisomers: (R,R), (S,S), (R,S), (S,R). All four are chiral and optically active (two enantiomeric pairs). The starting acid and alcohol are racemic mixtures, so all four esters form.

Teacher's Note: Two stereocentres give 22 = 4 stereoisomers, each chiral here.

Exam Note: Two chiral centres, no meso form: four active isomers.

Question 132. Cyclopentanol —PBr3→ W —(Mg, ether)→ X —[(1) V, (2) H3O+]→ Y —(CH3COCl)→ Z, where V is obtained by Na2Cr2O7 oxidation of cyclopentanol. Product Z is:
(a) acetate ester of a bicyclopentyl with the OAc on the ring carbon next to the junction carbon
(b) acetate ester of 1,1'-bicyclopentyl-1-ol (OAc on the carbon joining the two rings)
(c) acetate ester with the OAc on a remote ring carbon
(d) a bicyclopentyl acetate containing a ring C=C

Solution. Answer: (b). W = cyclopentyl bromide; X = cyclopentylmagnesium bromide; V = cyclopentanone. The Grignard adds to the ketone to give the tertiary alcohol Y = 1,1'-bicyclopentyl-1-ol. Acetyl chloride acetylates the OH, giving the acetate with OAc on the carbon that joins the two rings.

Teacher's Note: Grignard plus ketone gives tertiary alcohol; acetyl chloride then converts it to its acetate.

Exam Note: Track each step: bromide, Grignard, ketone, alcohol, ester.

Question 133. Benzhydrol (diphenylmethanol, Ph2CH-OH) —(LiAlH4/AlCl3)→ (A). Identify the product:
(a) No reaction
(b) biphenyl
(c) diphenylmethane, Ph2CH2
(d) benzophenone, Ph-C(=O)-Ph

Solution. Answer: (c). AlCl3 ionises the benzhydrol to the stable diphenylmethyl carbocation, and hydride from LiAlH4 then adds to it. The C-OH group is replaced by H: diphenylmethane.

Teacher's Note: Lewis acid ionises a benzylic alcohol; hydride then reduces the cation.

Exam Note: LiAlH4/AlCl3 deoxygenates benzylic alcohols.

Question 134. (EtO)2CH-CHO + CH3MgI —H3O+→ (A). Product obtained is:
(a) CH3-C(=O)-CHO
(b) CH3-CH(OH)-CHO
(c) CH3-C(=O)-CH2-OH
(d) CH3-CH(OH)-CH2-OH

Solution. Answer: (b). The Grignard adds only to the free CHO, giving (EtO)2CH-CH(OMgI)CH3. The acetal is stable to the Grignard reagent but hydrolysed by H3O+ to a CHO group. Product: CH3-CH(OH)-CHO (2-hydroxypropanal).

Teacher's Note: Acetals resist Grignard reagents but release the aldehyde in aqueous acid.

Exam Note: Acetal protects an aldehyde, then acid unmasks it.

Question 135. Reaction (1): CH3-CH=CH-CH3 —(cold KMnO4)→ (A) —(NaIO4)→ (B) (2 mole). Reaction (2): CH3-CH=CH-CH3 —(KMnO4/NaIO4)→ (C) (2 mole). Products (B) and (C) respectively are:
(a) CH3CHO, CH3CO2H
(b) CH3CO2H, CH3CHO
(c) CH3CHO in both reactions
(d) CH3CO2H in both reactions

Solution. Answer: (a). Reaction 1: cold KMnO4 gives the diol (A) = butane-2,3-diol, and NaIO4 cleaves it to 2 CH3CHO (B). Reaction 2 (Lemieux-von Rudloff conditions): the diol is formed and cleaved, and the permanganate re-oxidises the aldehyde, so 2 CH3CO2H (C) result.

Teacher's Note: Periodate alone stops at aldehydes; with permanganate present, aldehydes go on to acids.

Exam Note: Lemieux-von Rudloff gives carboxylic acids.

Question 136. 1-Tetralol (1,2,3,4-tetrahydronaphthalen-1-ol) —(TsCl, pyridine, 25 °C)→ A —(LiAlH4, pyridine, 25 °C)→ B. Product (B) is:
(a) 1,2-dihydronaphthalene
(b) 1,4-dihydronaphthalene
(c) tetralin (1,2,3,4-tetrahydronaphthalene)
(d) 1-chlorotetralin

Solution. Answer: (c). TsCl/pyridine converts the OH to the tosylate A without breaking the C-O bond. LiAlH4 then displaces tosylate by hydride, so the C-OTs becomes C-H: tetralin.

Teacher's Note: Tosylate is a leaving group; hydride displaces it and removes oxygen.

Exam Note: Alcohol to alkane: tosylate then LiAlH4.

Question 137. Cyclohexene → HO-(CH2)6-OH. This conversion can be achieved by:
(a) O3, Zn, then LiAlH4
(b) O3/H2O2, then LiAlH4
(c) cold dil. KMnO4, HIO4, then LiAlH4
(d) All of these

Solution. Answer: (d). In all three routes the ring is cleaved to a six-carbon chain with two oxygenated ends, which LiAlH4 reduces to hexane-1,6-diol. (a) gives hexanedial; (b) gives hexanedioic acid (adipic acid); (c) diol then HIO4 gives hexanedial. Hydride reduces the dialdehyde or diacid to HO-(CH2)6-OH.

Teacher's Note: Each cleavage route gives a C6 dicarbonyl or diacid; LiAlH4 reduces either to the diol.

Exam Note: Several cleavage routes can reach the same diol.

Question 138. Which of the following alcohols on treatment with HCl gives 3-chloro-3-methylcyclohexene as a product?
(a) 4-methylcyclohex-2-en-1-ol type allylic alcohol (CH3 on ring carbon, OH on the ring carbon opposite)
(b) an isomeric methyl-substituted cyclohexenol with OH on a different ring carbon
(c) 1-methylcyclohex-2-en-1-ol (tertiary allylic alcohol)
(d) All of these

Solution. Answer: (d). Each alcohol ionises in HCl to the same resonance-stabilised allylic cation (positive charge shared between the tertiary methyl-bearing carbon and the other allylic carbon). Chloride attacks the tertiary end to give 3-chloro-3-methylcyclohexene. The structures in the scan are described in words only.

Teacher's Note: Different allylic alcohols can give one common allylic cation, hence one chloride.

Exam Note: Same allylic cation, same product.

Question 139. Cyclohexene —[(a) RCO3H, (b) CH3MgBr, (c) H+, H2O]→ (A). Product of the reaction is:
(a) cis-2-methylcyclohexanol (OH and CH3 both drawn on wedges)
(b) trans-2-methylcyclohexanol (OH on a hashed bond, CH3 on a wedge)
(c) cyclohexane-1,2-diol (trans, hashed OH groups)
(d) 3-methylcyclohexene

Solution. Answer: (b). The peracid gives cyclohexene oxide. CH3MgBr opens the epoxide by SN2 from the back side, so CH3 and O are trans. Acid work-up gives trans-2-methylcyclohexanol.

Teacher's Note: Epoxide opening is anti: nucleophile and oxygen end up trans on the ring.

Exam Note: Epoxide plus Grignard gives trans product.

Question 140. Esterification of a carboxylic acid involves only the carbonyl carbon. Esterification of (-)-lactic acid with methanol (HCl) yields (+)-methyl lactate. Assuming no side reactions, what is true about this reaction?
(a) An SN2 process has occurred, inverting the absolute configuration of the chiral centre
(b) An SN1 reaction at the chiral centre has inverted the optical rotation
(c) A diastereomer has been produced; diastereomers have different physical properties including optical rotation
(d) Optical rotation is not directly related to absolute configuration, so the change in sign of rotation is merely a coincidence

Solution. Answer: (d). Esterification occurs at the carboxyl carbon, so no bond to the stereocentre is broken and its configuration is unchanged. The sign of optical rotation (+ or -) is an experimental property that is not directly tied to R/S, so a sign change on converting acid to ester is a coincidence. No new stereocentre or diastereomer forms.

Teacher's Note: Configuration is retained; the sign of rotation does not track R/S.

Exam Note: Optical rotation sign is empirical, not predictable.

Question 141. Which set of reagents, used in the order shown, would successfully accomplish the conversion of cyclohexyl methyl ketone, C6H11-CO-CH3, into C6H11-CH(CH3)-CH2CH2CH3?
(a) CH3CH2CH2MgBr; H3O+; PCC, CH2Cl2
(b) CH3CH2CH2MgBr; H3O+; H2SO4, heat; PCC, CH2Cl2
(c) (C6H5)3P=CHCH2CH3, then B2H6; CH3CO2H
(d) (C6H5)3P=CHCH2CH3; H2O

Solution. Answer: (c). The Wittig reagent Ph3P=CHCH2CH3 converts the C=O into C=CH-CH2CH3. Treating the alkene with B2H6 and then CH3CO2H (hydroboration followed by protonolysis) replaces the C-B bond by C-H, which saturates the alkene to the required alkane. (a) and (b) give alcohols or ketones, not the alkane; (d) leaves the alkene.

Teacher's Note: Wittig builds the carbon skeleton; hydroboration then acetic acid hydrogenates the alkene.

Exam Note: Wittig, then B2H6/acid, makes the alkane.

Question 142. Ethyl 2-oxocyclohexanecarboxylate (a ring ketone with CO2Et on the adjacent carbon) —[(1) H3O+, (2) Δ]→ Product. The product is:
(a) 2-oxocyclohexanecarbaldehyde
(b) cyclohexanone
(c) 2-methylcyclohexanone
(d) cyclohexane-1,2-dione

Solution. Answer: (b). Hydrolysis converts the ester to the β-keto acid. On heating, a β-keto acid loses CO2 through a cyclic six-membered transition state, leaving cyclohexanone.

Teacher's Note: β-Keto esters hydrolyse then decarboxylate on heating, leaving the ketone.

Exam Note: β-Keto acid decarboxylates easily on warming.

Question 143. Which of the following compounds on hydrolysis followed by heating gives a product that gives a positive iodoform test?
(a) CH3-CH(CO2Et)-C(=O)-CH2-CH3
(b) ethyl 1-acetylcyclobutane-1-carboxylate (cyclobutane carrying CO2Et and C(=O)CH3 on the same carbon)
(c) diethyl 2-methylmalonate, CH3-CH(CO2Et)2
(d) ethyl 2-oxocyclopentanecarboxylate

Solution. Answer: (b). Each compound is a β-keto ester or malonate, so hydrolysis and heating decarboxylate it. (a) gives pentan-3-one (no CH3CO-); (b) gives acetylcyclobutane, a methyl ketone, which gives iodoform; (c) gives propanoic acid; (d) gives cyclopentanone (no methyl ketone).

Teacher's Note: Decarboxylate each β-keto ester and look for a CH3CO- group in the product.

Exam Note: Iodoform needs a methyl ketone after decarboxylation.

Question 144. Treatment of a 2° OH with CrO3/H2SO4 yields an/a:
(a) aldehyde
(b) carboxylic acid
(c) ester
(d) ketone

Solution. Answer: (d). Secondary alcohols are oxidised by chromic acid to ketones, and ketones resist further oxidation under these conditions.

Teacher's Note: Secondary alcohol oxidation stops at the ketone.

Exam Note: 2° alcohol gives ketone with CrO3.

Question 145. Esterification of the acid P with the alcohol Q will give: P = (S)-2-(4-isobutylphenyl)propanoic acid (ibuprofen type, CO2H on a stereocentre); Q = (±)-1-(naphthyl)ethanol (racemic secondary alcohol).
(a) only one enantiomer
(b) a mixture of diastereomers
(c) a mixture of enantiomers
(d) only one diastereomer

Solution. Answer: (b). The acid is a single enantiomer (S), while the alcohol is a racemic mixture of (R) and (S). Esterification gives (S,R) and (S,S) esters. These are not mirror images of each other, so they are diastereomers.

Teacher's Note: Pure (S) acid with racemic alcohol gives (S,R) and (S,S): diastereomers.

Exam Note: Chiral acid plus racemic alcohol gives diastereomers.

Question 146. Diethyl 2,5-dioxocyclohexane-1,4-dicarboxylate (ring with two C=O and two CO2Et groups) —(H2O/Δ)→ product. Identify the major product when the given compound is hydrolysed and heated strongly:
(a) the corresponding diketo diacid
(b) 3-hydroxycyclohex-2-en-1-one-type enol-ketone
(c) the bis-enol form of cyclohexane-1,4-dione (a ring with OH at C-1 and C-4 and two C=C), 1,4-dihydroxy-1,4-cyclohexadiene
(d) cyclohexane-1,4-dicarboxylic acid

Solution. Answer (from key): (c). Hydrolysis gives the β-keto diacid, and heating decarboxylates both CO2H groups to cyclohexane-1,4-dione. Of the options, (c) is the only one that corresponds to the 1,4-dioxygenated ring without CO2H groups (the enolised form of the 1,4-dione, which is how the book draws it). In practice the dione itself is the more stable tautomer; this item needs a human check.

Teacher's Note: Double hydrolysis and decarboxylation removes both ester carbons, leaving the 1,4-dioxygenated ring.

Exam Note: β-Keto diacid loses two CO2 on heating.

Question 147. In the compound with four groups on a cyclohexane ring: A = ester (CO2R), B = acid chloride (COCl), C = aldehyde (CHO), D = ring ketone (C=O). Find the reactivity order with LiAlH4:
(a) A > B > C > D
(b) B > C > D > A
(c) D > C > B > A
(d) B > D > C > A

Solution. Answer: (b). Reactivity toward hydride follows electrophilicity of the carbonyl carbon: acid chloride (B) > aldehyde (C) > ketone (D) > ester (A). The ester carbon is stabilised by donation from the alkoxy oxygen, making it least reactive.

Teacher's Note: Order of carbonyl reactivity: acid chloride, aldehyde, ketone, ester.

Exam Note: Reactivity: acyl chloride > aldehyde > ketone > ester.

Question 148. Find the reaction in which the obtained product gives a positive isocyanide test:
(a) benzamide (Ph-CO-NH2) with LiAlH4
(b) benzamide with NaBH4
(c) acetanilide (Ph-NH-CO-CH3) with LiAlH4
(d) acetanilide with NaBH4

Solution. Answer: (a). The isocyanide (carbylamine) test is given only by primary amines. LiAlH4 reduces benzamide to benzylamine, PhCH2NH2 (primary). NaBH4 does not reduce amides. LiAlH4 reduces acetanilide to N-ethylaniline (secondary), which is carbylamine-negative.

Teacher's Note: Carbylamine test needs a primary amine; only LiAlH4 reduces the primary amide to one.

Exam Note: NaBH4 does not reduce amides.

Question 149. A compound drawn on a carbon skeleton bearing aldehyde, ketone, carboxylic acid and ester groups. How many functional groups are reduced by LAH (lithium aluminium hydride) and SBH (sodium borohydride) respectively?
(a) 4, 4
(b) 4, 3
(c) 3, 4
(d) 4, 2

Solution. Answer (from key): (d). LiAlH4 reduces aldehyde, ketone, carboxylic acid and ester: 4 types. NaBH4 reduces only the aldehyde and ketone (not acid or ester): 2. The structure is a complex line drawing; the group count above follows the key. This item needs a human check.

Teacher's Note: LiAlH4 reduces CHO, C=O, COOH and COOR; NaBH4 only CHO and C=O.

Exam Note: NaBH4 is selective: aldehydes and ketones only.

Question 150. An unknown compound (A) (molar mass = 180) on acylation gives a product (molar mass = 390). Find the number of hydroxyl groups present in compound (A).
(a) 5
(b) 6
(c) 10
(d) 1

Solution. Answer: (a). Each acetylation replaces H by COCH3 and adds 42 g/mol. Increase = 390 - 180 = 210 g/mol; 210 / 42 = 5. So (A) has 5 OH groups (glucose, C6H12O6, M = 180).

Teacher's Note: Each acetyl group adds 42; mass gain divided by 42 gives the number of OH groups.

Exam Note: Mass gain / 42 = number of acetylated OH.

Question 151. Which of the following pairs of compounds is differentiated by NaHCO3 as well as by NaOH?
(a) benzoic acid and phenol
(b) phenol and benzyl alcohol
(c) benzoic acid and benzyl alcohol
(d) phenol and anisole

Solution. Answer: (c). Benzoic acid dissolves in NaHCO3 (CO2 evolved) and in NaOH, but benzyl alcohol does so in neither, so both reagents distinguish them. (a) Phenol does not react with NaHCO3, but both dissolve in NaOH, so NaOH cannot distinguish. (b) and (d): neither reacts with NaHCO3; NaOH distinguishes but NaHCO3 does not.

Teacher's Note: A carboxylic acid reacts with both bases; phenols react with NaOH only; alcohols with neither.

Exam Note: NaHCO3 separates carboxylic acids from phenols.

Question 152. Arrange the following compounds in order of their reactivity toward LiAlH4: (i) cyclopentanone (ii) N-methyl-γ-butyrolactam (N-methylpyrrolidin-2-one) (iii) γ-butyrolactone (a five-membered cyclic ester)
(a) i < ii < iii
(b) i < iii < ii
(c) ii < i < iii
(d) ii < iii < i

Solution. Answer: (d). Ketone (i) is the most reactive carbonyl. The ester (iii) is less reactive because the ring oxygen donates electrons to the C=O. The amide (ii) is least reactive because nitrogen donates strongly. Order: ii < iii < i.

Teacher's Note: Donation from N or O into C=O lowers reactivity: amide least, ester next, ketone most.

Exam Note: Carbonyl reactivity: ketone > ester > amide.

Question 153. Choose the statement that is true about A, B and C in the following separation scheme: a mixture of naphthalene and tetrahydroisoquinoline in diethyl ether is treated with HCl; the ether layer is evaporated to give A. The aqueous layer is made basic with 10% NaOH and extracted: the ether layer is evaporated to give B, and the aqueous layer is evaporated to give C.
(a) A = tetrahydroisoquinoline, B = naphthalene, C = inorganic ions (Na+, Cl-)
(b) A = naphthalene, B = tetrahydroisoquinoline, C = inorganic ions (Na+, Cl-)
(c) A = inorganic ions, B = naphthalene, C = tetrahydroisoquinoline
(d) A = inorganic ions, B = naphthalene, C = tetrahydroisoquinoline

Solution. Answer: (b). Naphthalene is neutral and stays in the ether layer: A = naphthalene. The basic amine is protonated by HCl and moves into the aqueous layer as its salt. Adding NaOH regenerates the free amine, which is extracted into ether: B = tetrahydroisoquinoline. The remaining aqueous layer holds NaCl: C = Na+ and Cl-.

Teacher's Note: Acid-base extraction: amines go to water as salts, then return to ether when basified.

Exam Note: Amine salts dissolve in water; free amines in ether.

Question 154. A naphthalene-based compound carrying a CH2OH group, a phenolic OH, a vinyl (CH=CH2) group, and an aryl-O-aryl(OCH3) ether unit (a diaryl ether and a methyl aryl ether) is treated with x HI. The value of x is:
(a) 2
(b) 3
(c) 4
(d) 5

Solution. Answer (from key): (b). HI reacts with: (1) the benzylic-type CH2OH, giving CH2I (1 mol); (2) the aryl methyl ether, giving ArOH + CH3I (1 mol); (3) the vinyl group by addition (1 mol). The phenolic OH and the diaryl ether C-O bonds do not react. Total x = 3. The structure is a complex drawing; this follows the key. This item needs a human check.

Teacher's Note: Count HI-consuming groups: alcohol, alkyl-aryl ether, alkene; phenol and diaryl ether are inert.

Exam Note: Diaryl ethers and phenols do not react with HI.

Question 155. 2-(Formylmethyl)benzoic acid (benzene ring with CO2H and CH2-CHO ortho to each other) —(NaBH4)→ (A) —(H+, Δ)→ (B) (cyclic). Compound (B) is:
(a) a six-membered lactone: 3,4-dihydroisocoumarin (isochroman-1-one)
(b) 2-(2-hydroxyethyl)benzoic acid
(c) a five-membered lactone: phthalide
(d) (a) and (c) both

Solution. Answer: (a). NaBH4 reduces only the aldehyde, giving (A) = 2-(2-hydroxyethyl)benzoic acid. Acid and heat cause intramolecular esterification (lactonisation); the ring contains C(=O), O, CH2, CH2 and two aromatic carbons, a six-membered lactone.

Teacher's Note: NaBH4 spares the acid; the hydroxy acid then closes to a six-membered lactone.

Exam Note: Hydroxy acid lactonisation: count ring size.

Question 156. 1-Phenoxypropane is treated with excess conc. HI at 0 °C and the mixture of products is treated with thionyl chloride. The products formed are:
(a) n-propanol + chlorobenzene
(b) phenol + n-propyl iodide
(c) n-propyl chloride + chlorobenzene
(d) n-propyl chloride + phenol

Solution. Answer: (b). With HI, an alkyl aryl ether cleaves at the alkyl-O bond (phenyl-O cannot be attacked by SN2/SN1), giving phenol + n-propyl iodide. SOCl2 does not convert phenol to chlorobenzene and does not react with the alkyl iodide, so these remain.

Teacher's Note: HI cleaves alkyl-aryl ether at the alkyl side; phenol is not converted by SOCl2.

Exam Note: Phenol + alkyl halide, never aryl halide.

Question 157. Amongst the following compounds, the compound having the lowest boiling point is: (a) a short primary alcohol (propan-1-ol), (b) a longer primary alcohol, (c) an ether (a C-O-C compound of similar carbon count), (d) a diol.

Solution. Answer: (c). The ether has no O-H group, so it cannot form hydrogen bonds with itself. The alcohols (a), (b) hydrogen-bond, and the diol (d) hydrogen-bonds most strongly, so they boil higher. The ether has the lowest boiling point.

Teacher's Note: Boiling point rises with hydrogen bonding: ether lowest, alcohol higher, diol highest.

Exam Note: No O-H means no hydrogen bonding, lower boiling point.

Level 2

Level 2, Q1. Consider the pairs of ethers (A) and (B) shown, with cleavage conditions. Which ether of each pair will be more rapidly cleaved? I: (A) phenyl isopropyl ether vs (B) 3,5-dimethylphenyl methyl ether, HBr in CH3CN, 40 °C. II: (A) 4,4-dimethylcyclohexyl tert-butyl ether vs (B) 4,4-diethylcyclohexyl methyl ether, H2SO4 in CH3CN, 40 °C. III: (A) a phenyl ether of an open-chain tertiary-type alkyl group vs (B) a phenyl ether of a bridged bicyclic (norbornyl-type) group, H2SO4 in CH3CN, 40 °C. IV: (A) a pyranoside with OCH3 on a ring carbon and OH on the anomeric (acetal) carbon vs (B) the pyranoside with OH on that ring carbon and OCH3 on the anomeric carbon, 5% aqueous H2SO4, 25 °C. V: (A) allyl isopropyl ether vs (B) propenyl isopropyl ether (enol ether), 5% aqueous H2SO4, 25 °C. (Structures III and IV are described from the scan.)

Solution. Answer (from key): I - B; II - A; III - A; IV - B; V - B. Reasoning: I - HBr cleavage is an SN2 attack of Br- on the protonated ether at the alkyl carbon, which is faster at the methyl group of (B) than at the secondary isopropyl of (A). II - the tert-butyl ether (A) ionises easily to the tert-butyl cation (SN1). III - (A) can form a stable tertiary cation; the bridged system (B) cannot form a planar bridgehead cation. IV - the acetal (B) hydrolyses easily in aqueous acid; the hemiacetal ether (A) lacks that pathway. V - (B) is an enol ether, protonated at carbon to give a stabilised oxocarbenium ion, so it hydrolyses much faster than the allyl ether (A). Part III is read from a figure and needs a human check.

Teacher's Note: Match mechanism to substrate: SN2 favours methyl, SN1 favours tertiary, acetals and enol ethers hydrolyse in acid.

Exam Note: Pick SN1 or SN2 first, then compare substrates.

Level 2, Q2 (Comprehension). Isomers of C5H12O: (a) CH3CH2CH2CH2CH2OH (b) CH3CH2CH2CH(OH)CH3 (c) CH3CH2CH(OH)CH2CH3 (d) CH3CH2C(CH3)2OH (e) (CH3)2CHCH2CH2OH (f) (CH3)2CHCH(OH)CH3 (g) HOCH2CH(CH3)CH2CH3 (h) (CH3)3CCH2OH. Based on these isomers answer: A. Which isomer is most reactive towards dehydration by conc. H2SO4? B. Which isomer(s) will undergo rearrangement when treated with conc. H2SO4? C. Which isomers on dehydration give an alkene capable of showing geometrical isomerism? D. Which isomer is least acidic? E. Which isomers on dehydration give the most stable alkene? F. Which isomer on dehydration with conc. H3PO4 undergoes maximum rearrangement?

Solution. Answers (from key): A - d; B - a, c, e, f, g, h; C - a, b, c; D - d; E - d, e, f, g, h; F - e. Reasoning: A - the tertiary alcohol (d) forms the most stable carbocation. C - (a), (b), (c) give pent-2-ene (cis/trans). D - tertiary alcohols are the least acidic. E - (d), (e), (f), (g), (h) all end up as 2-methylbut-2-ene (the trisubstituted, most stable alkene), (e), (f), (g), (h) after a hydride or methyl shift. F - (e) needs two successive hydride shifts (1° to 2° to 3°). Part B follows the key; it lists (c) but not (b), though both give an equal-stability 2° to 2° shift, so it needs a human check.

Teacher's Note: Dehydration goes through carbocations: tertiary easiest, shifts give 2-methylbut-2-ene, and pent-2-ene shows cis-trans.

Exam Note: Decide cation stability, then shifts, then alkene stability.

Level 2, Q3 (Comprehension). Oxidation ladder: R-CH3 ⇌ R-CH2-OH ⇌ RCHO ⇌ RCO2H ([O] up, [H] down). A. Conversion CH3CH3 → CH3CH2OH is achieved by: (a) Br2/hν, alc. KOH (b) Br2/hν, aq. KOH (c) Br2/CCl4, LiAlH4 (d) Br2/CCl4, NaBH4. B. R-CH2OH → RCHO can be done by: (a) PCC/CH2Cl2 (b) Cu, 300 °C (c) CrO3 (d) All of these. C. RCHO → RCO2H can be done by: (a) KMnO4 (b) H2CrO4 (c) K2Cr2O7 (d) All of these. D. RCO2H → RCHO can be done by: (a) LiAlH4 (b) NaBH4 (c) DIBAL-H (d) All of these. E. RCHO → RCH2OH can be done by: (a) LiAlH4 (b) NaBH4 (c) H2/Ni (d) All of these. F. Reduction R-CH2OH → R-CH3 can be done by: (a) LiAlH4 (b) NaBH4-AlCl3 (c) H2-Ni (d) Red P + HI

Solution. Answers (from key): A - b; B - d; C - d; D - c; E - d; F - d. A: radical bromination (Br2/hν) gives C2H5Br, then aq. KOH substitutes OH. B: PCC, Cu at 300 °C (dehydrogenation) and CrO3 all oxidise a primary alcohol. C: KMnO4, H2CrO4 and K2Cr2O7 all oxidise an aldehyde to an acid. D: DIBAL-H (not LiAlH4 or NaBH4) stops at the aldehyde stage (hydride reagents otherwise give the alcohol). E: all three reduce an aldehyde to a primary alcohol. F: Red P + HI converts an alcohol to an alkane (via the iodide).

Teacher's Note: Pick reagents by strength: DIBAL-H stops at aldehyde; red P + HI fully reduces alcohol to alkane.

Exam Note: Match reagent strength to the oxidation level.

Level 2, Q4. Which of the following is true for 3-methylbutanal, (CH3)2CHCH2CHO? (a) This compound may be classified as an aldehyde. (b) This compound may be classified as a ketone. (c) An aldol reaction takes place on treatment with NaOH solution. (d) There is no reaction with LiAlH4 in ether solution. (e) An excess of CH3MgBr in ether reacts to give 4-methyl-2-pentanol. (f) Wolff-Kishner reduction gives butane. (g) This compound is an isomer of 3-pentanone.

Solution. Answer (from key): a, c, e, g. (a) true: it has a CHO group. (b) false. (c) true: it has α-hydrogens, so it undergoes aldol addition. (d) false: LiAlH4 reduces it to 3-methylbutan-1-ol. (e) true: CH3MgBr adds to CHO giving (CH3)2CHCH2CH(OH)CH3, 4-methylpentan-2-ol. (f) false: Wolff-Kishner gives 2-methylbutane (isopentane), not butane. (g) true: both are C5H10O.

Teacher's Note: Check each claim against structure: α-H allows aldol; Wolff-Kishner keeps the carbon skeleton.

Exam Note: Wolff-Kishner keeps all carbons: check the product name.

Level 2, Q5. Multistep synthesis planning. Reactants: (A) benzene, (B) acetone, (C) propan-1-ol, (D) ethylene oxide, (E) ethyl acetate, (F) acetic anhydride. Reagents: (1) Jones' reagent, (2) PCC, (3) NaH, (4) NaBH4, (5) SOCl2, (6) PBr3, (7) AlCl3, (8) Mg turnings in ether. Fill in the boxes for five syntheses: (1) PhCH2OH —[(1) Reagent □, (2) reactant □, (3) H3O+]→ C9H12O2 —[Reagent □]→ PhCH2-O-CH2-CHO. (2) Reactant □ —[Reagent □]→ C3H6O2 —[(1) Reagent □, (2) Reactant □, Reagent □, heat]→ propiophenone (PhCOCH2CH3). (3) Cyclopentanol —[(1) Reagent □, (2) Reagent □, (3) CO2, (4) H3O+]→ C6H10O2 —[(1) Reactant □, heating with catalytic acid]→ propyl cyclopentanecarboxylate. (4) Reactant □ —[Reagent □]→ C3H6O —[(1) NaOH solution, (2) Reagent □, (3) Reactant □]→ CH3CH2CH(OCOCH3)CH(CH3)CH2OCOCH3. (5) Reactant □ —[(1) Reagent □, (2) Reagent □]→ C3H7Br —[(1) Reagent □, (2) Reactant □, (3) H3O+]→ (CH3)2CH-C(OH)(CH3)-CH(CH3)2.

Solution. Answers (from key): (1) Reagent 3, Reactant D, Reagent 2. (2) Reagent 1, Reagent 5, Reactant A, Reagent 7. (3) Reagent 6, Reagent 8, Reactant C. (4) Reagent 2, Reagent 4, Reactant F. (5) Reagent 4, Reagent 6; Reagent 8, Reactant E or F. Working: (1) NaH gives PhCH2O-, which opens ethylene oxide (D) to PhCH2OCH2CH2OH (C9H12O2); PCC then gives the aldehyde. (2) Jones oxidises propan-1-ol to propanoic acid (C3H6O2); SOCl2 gives propanoyl chloride; benzene (A) with AlCl3 does Friedel-Crafts acylation. (3) PBr3, then Mg, then CO2 and acid give cyclopentanecarboxylic acid; propan-1-ol (C) with acid catalyst makes the ester. (4) PCC gives propanal (C3H6O); NaOH gives the aldol CH3CH2CH(OH)CH(CH3)CHO; NaBH4 reduces it to the 1,3-diol; acetic anhydride (F) acetylates both OH groups. (5) NaBH4 reduces acetone to propan-2-ol; PBr3 gives 2-bromopropane; Mg gives (CH3)2CHMgBr, which adds twice to an acetyl derivative (ester E or anhydride F) giving the tertiary alcohol with two isopropyl groups and a CH3. Corrected: the key prints 'C or F' for the last box; reactant C (propan-1-ol) cannot give this product, so it should read 'E or F' (ethyl acetate or acetic anhydride). Needs a human check.

Teacher's Note: Plan backwards: identify the functional group formed at each arrow, then pick the matching reagent.

Exam Note: Retrosynthesis: match each arrow to one reagent.

Level 2, Q6. Which of the following is true for 3-methyl-2-butanone, CH3COCH(CH3)2? (a) It may be prepared by CrO3 oxidation of 2-methyl-2-butanol. (b) Its reaction with NaBH4 gives a secondary alcohol. (c) It may be prepared by acidic Hg2+-catalysed hydration of 3-methyl-1-butyne. (d) It forms a silver mirror on treatment with [Ag(NH3)2]+. (e) This compound is an isomer of 4-penten-1-ol.

Solution. Answer (from key): b, c, e. (a) false: 2-methyl-2-butanol is tertiary and is not oxidised to a ketone (3-methylbutan-2-ol would be). (b) true: a ketone is reduced to a secondary alcohol. (c) true: Hg2+ hydration of a terminal alkyne gives the methyl ketone. (d) false: ketones do not give Tollens' test. (e) true: both are C5H10O.

Teacher's Note: Check each claim: tertiary alcohols resist oxidation; terminal alkyne hydration gives methyl ketones; ketones fail Tollens'.

Exam Note: Terminal alkyne hydration gives methyl ketone.

Level 2, Q7. Which of these methods would serve to prepare 1-phenyl-2-propanol, PhCH2CH(OH)CH3? (a) Addition of benzyl Grignard reagent to acetaldehyde. (b) Addition of phenyllithium to propylene oxide (methyloxirane). (c) Addition of phenyl Grignard reagent to acetone. (d) Acid-catalysed hydration of 2-phenyl-1-propene. (e) Addition of methyl Grignard reagent to acetophenone. (f) Addition of methyl Grignard reagent to phenylacetaldehyde.

Solution. Answer (from key): a, b, f. (a) PhCH2MgX + CH3CHO gives PhCH2CH(OH)CH3. (b) PhLi attacks the less hindered CH2 of methyloxirane, giving PhCH2CH(OH)CH3. (f) CH3MgX + PhCH2CHO gives the same alcohol. (c) gives 2-phenyl-2-propanol; (d) gives 2-phenylpropan-2-ol (Markovnikov); (e) gives 2-phenylpropan-2-ol.

Teacher's Note: Disconnect at the carbinol carbon; epoxide opening occurs at the less hindered carbon.

Exam Note: Check which carbon the nucleophile bonds to.

Level 2, Q8 (Match the Column). Match Column (I) reaction with Column (II) name. (a) a vicinal diol (pinacol) with H+/Δ; (b) a 1,2-amino alcohol (pinacol-type, OH on one carbon and NH2 on the adjacent one) with NaNO2/2 HCl; (c) a tetrasubstituted epoxide (2,2,3,3-tetramethyloxirane) with H+/Δ; (d) a vicinal diol with (1) TsCl, (2) Et3N, Δ. Column (II): (p) Pinacol-pinacolone rearrangement; (q) Semi-pinacol reaction; (r) Pinacolic-diazotization; (s) Pinacol-fashion reaction.

Solution. Answer (from key): a - p, b - r, c - s, d - q. (a) acid on a diol is the classic pinacol-pinacolone rearrangement. (b) diazotisation of an amino alcohol followed by 1,2-shift is the pinacolic-diazotisation (Tiffeneau-Demjanov type). (c) the epoxide opens with acid and rearranges to a carbonyl compound in the same way as a pinacol. (d) one OH is converted to tosylate (a leaving group) and the shift occurs without a free carbocation: a semi-pinacol reaction.

Teacher's Note: Identify the leaving group created: water (pinacol), N2 (diazotisation), ring-opened epoxide, or tosylate (semi-pinacol).

Exam Note: Name reactions by how the leaving group forms.

Level 2, Q9 (Match the Column). Match Column (I) and Column (II). Reactants (a) 1-methylcyclohexan-1-ol with the oxygen labelled * (O*), with CH3OH/conc. H2SO4; (b) the same labelled alcohol with (1) NaH (2) CH3I; (c) the same labelled alcohol with (1) HBr (2) Mg (3) CH3I; (d) the unlabelled alcohol with (1) Na (2) 14CH3I. Products: (p) 1-methyl-1-(14CH3O)cyclohexane; (q) 1,1-dimethylcyclohexane; (r) 1-methoxy-1-methylcyclohexane with labelled oxygen (O*); (s) 1-methoxy-1-methylcyclohexane without labelled oxygen.

Solution. Answer (from key): a - s, b - r, c - q, d - p. (a) The tertiary alcohol ionises in conc. H2SO4 (SN1): the labelled O* leaves as water and CH3OH adds, so the product has an unlabelled O, (s). (b) NaH forms the alkoxide, which keeps O*, and methylation gives (r). (c) HBr gives the tertiary bromide, Mg gives the Grignard reagent, CH3I couples to give 1,1-dimethylcyclohexane, (q). (d) Na gives the alkoxide, and 14CH3I gives the ether with a 14C-labelled methyl, (p).

Teacher's Note: Follow the label: C-O bond broken (SN1) loses it; alkoxide alkylation keeps it.

Exam Note: Track which C-O bond breaks to follow the label.

Level 2, Q10. Reaction 1: the open-chain ketohexose CH2OH-C(=O)-CH(OH)-CH(OH)-CH(OH)-CH2OH with 5 HIO4. Reaction 2: the open-chain aldohexose OHC-CH(OH)-CH(OH)-CH(OH)-CH(OH)-CH2OH with 5 HIO4. Ratio of moles of formaldehyde obtained in reaction (1) and reaction (2)?

Solution. Answer (from key): 2. In the ketohexose both terminal CH2OH carbons (C-1 and C-6) give HCHO: 2 mol HCHO. In the aldohexose C-1 is CHO, which gives HCO2H, so only C-6 gives HCHO: 1 mol. Ratio = 2 : 1 = 2.

Teacher's Note: Only terminal CH2OH carbons give formaldehyde; an aldose has one, a 2-ketose has two.

Exam Note: Count CH2OH ends.

Level 2, Q11 (Comprehension). Di-tert-glycols rearrange in the presence of acid to give α-tertiary ketones (pinacol-pinacolone rearrangement). Four steps: (I) protonation of one OH; (II) loss of H2O giving a tertiary carbocation; (III) 1,2-shift (methyl migration) to give a more stable carboxonium ion; (IV) deprotonation to the ketone (pinacolone). A. What is the R.D.S. of the pinacol-pinacolone rearrangement? (a) I step (b) II step (c) III step (d) IV step. B. How many products are obtained when a mixture of the pinacol with Et and Ph on each carbinol carbon, (Et)(Ph)C(OH)-C(OH)(Et)(Ph), and the pinacol (CH3)(Ph)C(OH)-C(OH)(CH3)(Ph) is treated with H2SO4/Δ? (a) 1 (b) 2 (c) 3 (d) 4. C. 1-(Chloromethyl)cyclopentan-1-ol (a cyclopentane ring carbon bearing OH and CH2Cl) with AgNO3, Δ gives P. Product P is: (a) cyclopentanone (b) 2-chlorocyclohexanone (c) cyclohexanone (d) cyclopentenone. D. The amino alcohol (CH3)2C(OH)-C(NH2)(CH3)2 with NaNO2/HCl gives (A): (a) (CH3)3C-C(=O)-CH3 (b) the pinacol (CH3)2C(OH)-C(OH)(CH3)2 (c) the alkene tetramethylethylene (d) None of these.

Solution. Answers (from key): A - b; B - b; C - c; D - a. A: step II (formation of the carbocation by loss of water) is the slow step. B: the two pinacols rearrange separately (each gives one product through its own cation), so 2 products. C: Ag+ removes Cl-, the ring carbon migrates to the CH2+ carbon (semi-pinacol ring expansion), and the C-OH becomes C=O: cyclohexanone. D: diazotisation of NH2 gives N2+, which leaves, and a methyl shift gives pinacolone (CH3)3C-CO-CH3 (pinacolic-diazotisation).

Teacher's Note: Pinacol-type shifts: find the carbocation or diazonium leaving group and the migrating group.

Exam Note: RDS of pinacol: carbocation formation (water loss).

Subjective Problems

Subjective 1. (A) —(4 moles of PCC)→ a six-membered ring compound with C=O at C-1 and C-4 and CHO groups at C-2 and C-3 (cyclohexane-1,4-dione-2,3-dicarbaldehyde). Maximum number of moles of Ac2O consumed by reactant (A) is:

Solution. Answer: 4. PCC oxidises primary alcohols to aldehydes and secondary alcohols to ketones; the product has four carbonyl groups (two ketones, two CHO), so (A) must have four OH groups: two ring secondary OH (at C-1 and C-4) and two CH2OH groups (at C-2 and C-3), consuming 4 mol of PCC. Each OH is acetylated by one Ac2O, so maximum Ac2O consumed = 4 mol.

Teacher's Note: Work backwards: four carbonyls from four PCC means four OH groups, each taking one Ac2O.

Exam Note: One acetic anhydride per OH group.

Step-by-Step MS Chauhan Solutions for JEE Math

Download MS Chauhan Solutions for JEE

Access the complete chapter-wise PDF for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 6 Alcohal Ethers And Epoxides Part 2. These structured MS Chauhan Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.

Detailed Calculation Guides for JEE

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Explore More Study Resources for JEE Math

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these MS Chauhan Solutions for JEE Chemistry?

They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the MS Chauhan JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these MS Chauhan solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising MS Chauhan JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.