Step-by-Step MS Chauhan Solutions for JEE Chemistry Chapter 06 Alcohal Ethers And Epoxides
Review structured textbook solutions for JEE Chemistry Chapter 06 Alcohal Ethers And Epoxides prepared by MS Chauhan. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.
Download Chapter 06 Alcohal Ethers And Epoxides Textbook Solutions PDF
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Alcohols, Ethers and Epoxides - Level 1, Questions 1 to 93
Level 1
Question 1. The following transformation involves a carbocation rearrangement (spiro[4.5]decan-6-ol with H2SO4 giving the bicyclo[4.4.0] alkene, octalin). The carbocation is generated by protonation of the hydroxyl group followed by loss of water. Which bond has to migrate in the carbocation to yield the product indicated (after deprotonation)? The cation is drawn on the cyclohexane carbon next to the spiro carbon, with bonds (a), (b) = H, (c), (d) marked. Options: (a) a (b) b (c) c (d) d.
Solution. Answer (from key): (c). The secondary cation sits next to the spiro carbon. Migration of bond (c), a ring C-C bond of the cyclopentane from the spiro carbon to the cationic carbon, expands the five-membered ring to six and gives a ring-fusion tertiary cation; loss of H+ gives the fused bicyclic alkene.
Teacher's Note: Ring expansion converts a strained spiro cation into a stable fused six-six system.
Exam Note: Ring expansion drives spiro rearrangements.
Question 2. Identify the major product when the tertiary alcohol (HO at a ring-fusion carbon of a bicyclic compound that also carries a ring C=C and an ethyl group on the adjacent ring-fusion carbon) is treated with H2SO4. Options: (a) tetralin-type compound with ethyl on the aromatic ring; (b) naphthalene-type compound with ethyl; (c) tetralin-type compound with ethyl on the saturated side; (d) tetralin-type compound with ethyl on the saturated ring at another position.
Solution. Answer (from key): (a). Loss of water gives a tertiary cation; a 1,2-ethyl shift and loss of H+ create an aromatic ring (aromatisation is the driving force), giving the tetralin-type compound whose benzene ring bears the ethyl group, option (a).
Teacher's Note: Aromatisation is the thermodynamic sink in acid-catalysed rearrangements.
Exam Note: Look for aromatic ring formation as driving force.
Question 3. The amino alcohol (3-ethylpiperidine bearing a CH2OH group on C-3 and a free ring N-H) reacts with CH3COCl to give (A) (major). Options: (a) O-acetylated ester, ring N-H free; (b) N-acetylated amide, CH2OH free; (c) exocyclic alkene (3-methylene piperidine); (d) ketone at C-3 with ethyl.
Solution. Answer (from key): (b). The secondary amine N-H is more nucleophilic than the primary alcohol O-H, so acylation occurs on nitrogen to give the N-acetyl amide with the CH2OH intact.
Teacher's Note: Amine beats alcohol as nucleophile toward acid chlorides.
Exam Note: N-acylation preferred over O-acylation.
Question 4. Predict the product when compound (A), 3-formyl-5-oxocyclohexane-carboxylic acid methyl ester (ring with CHO, ketone C=O and CO2CH3 in 1,3,5 positions), reacts with LiAlH4. Options: (a) CH2OH, ester and ketone retained; (b) CH2OH, ester retained, ring OH; (c) two CH2OH groups and ring OH; (d) CHO retained, CH2OH and ring OH.
Solution. Answer (from key): (c). LiAlH4 is a strong reducing agent: aldehyde to CH2OH, ketone to secondary alcohol and ester to CH2OH (plus CH3OH). The product is 5-(hydroxymethyl)cyclohexane-1,3-diyl dimethanol type triol with a ring OH, option (c).
Teacher's Note: LiAlH4 reduces every carbonyl including esters.
Exam Note: LiAlH4 reduces all; NaBH4 does not touch esters.
Question 5. Predict the product when compound (A) of the above question 4 reacts with NaBH4. Options: (a) CH2OH, ester and ring ketone retained; (b) CH2OH, ester retained, ring OH; (c) two CH2OH and ring OH; (d) CHO retained, CH2OH and ring OH.
Solution. Answer (from key): (b). NaBH4 reduces aldehydes and ketones but not esters. So CHO becomes CH2OH and the ring C=O becomes CH-OH while CO2CH3 is unchanged, option (b).
Teacher's Note: NaBH4 is selective: aldehyde and ketone yes, ester no.
Exam Note: State NaBH4 does not reduce esters.
Question 6. Benzoic acid + CH3-O18-H (HCl catalyst, equilibrium) gives methyl benzoate + H2O. The labelled O18 will be in: (a) H2O (b) Methyl benzoate (c) Both (a) and (b) (d) Benzoic acid.
Solution. Answer (from key): (b). In Fischer esterification the acid loses OH and the alcohol loses H (acyl-oxygen cleavage). The alcohol oxygen (O18) is retained in the ester, so the label is in methyl benzoate.
Teacher's Note: Acid supplies OH, alcohol supplies H, so alcohol O stays in ester.
Exam Note: Label stays in ester: acyl-oxygen fission.
Question 7. oxalic acid reacts with ethylene glycol labelled with 18O on the hydroxyl oxygens (H+, heat) to give (A). Options: (a) cyclic oxalate ester with the carbonyl oxygens normal and ring oxygens normal, label on a C=O; (b) cyclic oxalate with label on the two ring (ester) oxygens; (c) label on carbonyl oxygen; (d) mono-ester HO-CO-CO-O-CH2CH2-OH.
Solution. Answer (from key): (b). Esterification proceeds with acyl-oxygen cleavage, so the alcohol oxygens (18O) become the single-bonded ester oxygens of the cyclic ethylene oxalate; the carbonyl oxygens are unlabelled.
Teacher's Note: Alcohol oxygen ends up as the alkoxy O of the ester.
Exam Note: Track the label: ester O comes from alcohol.
Question 8. Which is oxidised most easily? (a) CH3-CHOH-CH3 (b) phenol (c) CH3CH2-O-CH2CH3 (d) 1-methylcyclohexanol.
Solution. Answer (from key): (a). Propan-2-ol, a secondary alcohol with an α-hydrogen, is oxidised readily to acetone. Tertiary alcohol (d) has no α-H, ether (c) is inert to normal oxidants and phenol (b) resists simple oxidation.
Teacher's Note: Alpha hydrogen on carbinol carbon is needed for easy oxidation.
Exam Note: Tertiary alcohols resist oxidation: no alpha H.
Question 9. 2-Hydroxycyclopentane-1-carboxylic acid is heated with K2Cr2O7 to give (P). Options: (a) cyclopentene; (b) cyclopentanone; (c) 2-oxocyclopentane-carboxylic acid; (d) cyclopentane-carboxylic acid.
Solution. Answer (from key): (b). The secondary alcohol is oxidised to a ketone, giving a β-keto acid (2-oxocyclopentanecarboxylic acid). On heating, β-keto acids decarboxylate through a cyclic six-membered transition state, so the final product is cyclopentanone.
Teacher's Note: Beta-keto acids lose CO2 on heating, so oxidation is followed by decarboxylation.
Exam Note: Spot beta-keto acid: decarboxylation on heating.
Question 10. Which of the following reacts with HBr at a faster rate? The options are cyclohexanol derivatives drawn as chairs: (a) cyclohexanol with axial-type OH; (b) 1-methylcyclohexan-1-ol (tertiary, OH and CH3 on the same carbon); (c) 4-methylcyclohexanol with OH equatorial; (d) 4-methylcyclohexanol with OH axial.
Solution. Answer (from key): (b). Reaction with HBr proceeds by SN1 through a carbocation. The tertiary alcohol (b) forms the most stable tertiary carbocation, so it reacts fastest.
Teacher's Note: SN1 rate follows carbocation stability: tertiary fastest.
Exam Note: Tertiary > secondary > primary for HX.
Question 11. The conversion CH3-CO-C6H10-COOH (4-acetylcyclohexane-carboxylic acid) → CH3-CH(OH)-C6H10-CH2OH can be done by: (a) NaBH4 (b) LiAlH4 (c) PCC (d) KMnO4.
Solution. Answer (from key): (b). Both the ketone and the carboxylic acid must be reduced. Only LiAlH4 reduces carboxylic acids to primary alcohols (NaBH4 does not), and it also reduces the ketone.
Teacher's Note: Only LiAlH4 reduces COOH; NaBH4 leaves acids untouched.
Exam Note: LiAlH4 reduces acids; NaBH4 cannot.
Question 12. Benzene-1,4-dicarboxylic acid (terephthalic acid) with 2 CH3OH, H2SO4, heat gives (A). Options: (a) mono methyl ester (one CO2CH3, one CO2H); (b) dimethyl terephthalate (para); (c) dimethyl ester with the ester groups meta; (d) 1,4-diacetylbenzene.
Solution. Answer (from key): (b). With two equivalents of methanol under Fischer conditions both carboxylic acid groups are esterified, giving dimethyl terephthalate with the para arrangement retained.
Teacher's Note: Two equivalents of alcohol esterify both acid groups.
Exam Note: Count equivalents: 2 CH3OH means diester.
Question 13. 1-Hydroxy-(diphenylhydroxymethyl)cyclopentane: a cyclopentane ring (atoms 1-5) with OH on C-5 and, on C-1, the carbon C-6 carrying OH and two phenyl groups, treated with H2SO4 gives (P) (99% yield). Options: (a) six-membered ring ketone with C-1 as C=O and C-6 bearing two Ph; (b) alkene Ph2C=C (ring); (c) six-membered ring ketone with C-6 as C=O and C-1 bearing two Ph; (d) alcohol retained.
Solution. Answer (from key): (a). This is a pinacol-pinacolone type ring expansion: the diphenylcarbinyl cation forms, a ring bond migrates, the ring expands from five to six and the oxygen-bearing carbon becomes the carbonyl, giving 2,2-diphenylcyclohexanone. (Options (a) and (c) differ only in atom labelling of the same skeleton; the key choice is (a).)
Teacher's Note: Pinacol rearrangement expands rings and forms the most stable cation first.
Exam Note: Diphenyl cation forms first, ring expands.
Question 14. Predict the major product of the given reaction: a cyclopropane carrying two OH groups (a cis-diol on adjacent ring carbons), a gem-dimethyl carbon, a phenyl group and a p-methoxyphenyl group, with H+ gives (A). Options: (a) 3,3-dimethyl-indan-1-one bearing a p-methoxyphenyl substituent; (b) biaryl ether product; (c) indanone with OMe on the fused benzo ring and a phenyl substituent; (d) indanone with OMe at a meta position on the pendant ring.
Solution. Answer (from key): (a). Acid opens the cyclopropane to a stabilised cation which cyclises onto the phenyl ring (intramolecular Friedel-Crafts acylation-type) to give the gem-dimethyl indanone carrying the p-methoxyphenyl group, option (a).
Teacher's Note: Strained cyclopropane opens to cation then cyclises to indanone.
Exam Note: Cation cyclisation onto aryl ring forms five-ring.
Question 15. Identify the major product when the hydroxy-cyclobutyl enol ether (a cyclobutane ring bearing OH on a carbon attached to a dihydrofuran C=C) is treated with H+. Options: (a) spiro compound: cyclopentanone ring spiro-fused to tetrahydrofuran; (b) hydroxy alkylidene compound; (c) spiro compound with cyclopentanone, different oxygen placement; (d) spiro ketone with cyclopentane and tetrahydrofuran, ketone on the cyclopentane remote from spiro centre.
Solution. Answer (from key): (a). Protonation of the enol ether gives an oxocarbenium ion next to the cyclobutanol; a ring-expansion (semipinacol) shift enlarges the four-membered ring to five and creates the ketone, giving the spiro cyclopentanone-tetrahydrofuran compound.
Teacher's Note: Strained cyclobutanol undergoes semipinacol ring expansion.
Exam Note: Relief of ring strain drives ring expansion.
Question 16. An epoxide formed between two cyclopentane rings (spiro-epoxide, one ring carbon carrying a C=O) with H+ gives (A). Options (a)-(d) are spiro diketone/ketone skeletons: (a) spiro[4.5] ketone with ring expansion to cyclohexanone and the second ketone; (b) a 1,2-diketone; (c) spiro with different carbonyl position; (d) cyclohexanone spiro-fused to cyclopentane.
Solution. Answer (from key): (a). Acid opens the epoxide to the more stable tertiary cation; a 1,2-alkyl shift with ring expansion (Meinwald-type rearrangement) gives a cyclohexanone spiro-linked to the cyclopentanone, option (a).
Teacher's Note: Epoxide opens to the tertiary cation, then ring expands.
Exam Note: Meinwald rearrangement: epoxide to carbonyl.
Question 17. The compound 4,4-dimethoxycyclohexane-1-carboxylic acid methyl ester (ketal with CO2CH3 at C-1) reacts with LiAlH4 to give major product (A). Options: (a) hemiketal with CH2OH; (b) 4-hydroxycyclohexanone; (c) diol 4-(hydroxymethyl)cyclohexanol; (d) ketal retained with CH2OH.
Solution. Answer (from key): (d). LiAlH4 reduces the ester to a primary alcohol (CH2OH). The dimethyl ketal is a protected ketone and is stable to hydride in basic medium, so it is untouched.
Teacher's Note: Ketals survive LiAlH4; only the ester is reduced.
Exam Note: Ketal is stable to bases and hydrides.
Question 18. Resorcinol (benzene-1,3-diol) reacts with I2 + NaOH to give CHI3 (iodoform) + (A). Compound (A) is: (a) the disodium salt of an unsaturated dicarboxylic acid, NaO2C-CH=CH-CH2-CO2Na type (as drawn); (b) HO2C-(CH2)2-CO2H; (c) CH3CH2CH2CH2-COOH... as drawn CH3-CH2-CH2-CH2-C(=O)-OH; (d) CH3(CH2)3-CO-ONa.
Solution. Answer (from key): (a). Resorcinol has enolisable keto character (1,3-dihydroxy arrangement behaves like a 1,3-diketone: CH3-CO-type unit after tautomerism). Iodoform cleavage removes one carbon as CHI3 and ring opening gives the sodium salt of the unsaturated dicarboxylic acid, option (a).
Teacher's Note: Resorcinol acts as masked 1,3-diketone, so it gives iodoform.
Exam Note: Resorcinol gives positive iodoform test.
Question 19. 1-Methylcyclohex-2-en-1-ol (a tertiary allylic alcohol) is treated with H2CrO4 to give (A). Options: (a) no reaction; (b) 3-methylcyclohex-2-en-1-one; (c) 3-methylenecyclohexanone... as drawn exocyclic CH2 with ring ketone; (d) 2-methylcyclohex-2-enol.
Solution. Answer (from key): (b). A tertiary allylic alcohol undergoes oxidative (Babler-Dauben) transposition with chromic acid: a chromate ester forms, a [3,3]-type allylic shift moves oxygen to the far alkene carbon, and oxidation gives the conjugated enone 3-methylcyclohex-2-enone.
Teacher's Note: Tertiary allylic alcohols oxidise via 1,3-transposition to enones.
Exam Note: Allylic transposition then oxidation gives enone.
Question 20. Cyclohexylideneacetic acid (cyclohexane ring with =CH-CO2H) is treated with (1) excess CH3Li, (2) H+ to give (A); then (A) with I2/NaOH gives (B) + CHI3↓. Compound (B) is: (a) sodium cyclohexylideneacetate (C=C retained, CO2Na); (b) sodium salt with CH2 between ring and carboxylate and C=C... as drawn CH2-C(=O)ONa on alkene; (c) sodium cyclohexylacetate; (d) sodium cyclohexane-carboxylate.
Solution. Answer (from key): (a). Two equivalents of CH3Li convert the carboxylic acid into the methyl ketone (A), cyclohexylidene-acetone. The haloform reaction of this methyl ketone gives CHI3 and the carboxylate salt (B), sodium cyclohexylideneacetate; the C=C is untouched.
Teacher's Note: RCOOH + 2 MeLi gives methyl ketone; then haloform gives carboxylate.
Exam Note: Acid to methyl ketone to haloform.
Question 21. The diol with an 18OH (a cyclohexane bearing CH2-18OH and, through a chain, a carbon with OH and a cyclohexenyl ring) reacts with HBr in CCl4. The major product is: (a) a cyclic ether (tetrahydropyran fused to cyclohexane) carrying the cyclohexenyl group, with 18O lost; (b) the same cyclic ether retaining 18O; (c) bromo alcohol with Br on a ring-carbon; (d) primary bromide retaining the tertiary OH.
Solution. Answer (from key): (a). The tertiary, doubly activated (allylic) alcohol ionises readily in HBr to give a stabilised cation; the other hydroxyl attacks this cation intramolecularly, closing a six-membered cyclic ether. The oxygen that leaves as water is the labelled one, so the ether oxygen carries no 18O as the key states (a).
Teacher's Note: Tertiary allylic cation is trapped intramolecularly by the second OH.
Exam Note: Intramolecular trapping beats Br- addition here.
Question 22. Consider the following alcohols: (I) benzyl alcohol, C6H5CH2OH; (II) 4-nitrobenzyl alcohol; (III) 4-methoxybenzyl alcohol; (IV) 4-bromobenzyl alcohol. The order of decreasing reactivity towards nucleophilic substitution with HBr is: (a) III > I > IV > II (b) III > I > II > IV (c) I > III > IV > II (d) I > III > II > IV.
Solution. Answer (from key): (a). The reaction goes through a benzylic carbocation (SN1). The p-OMe group stabilises it strongly by resonance (+R), H is the reference, Br is weakly deactivating (-I outweighs +R) and NO2 is strongly deactivating (-R, -I). Order: III > I > IV > II.
Teacher's Note: Rate follows cation stability: +R donors speed up, -R withdrawers slow.
Exam Note: Rank by substituent effect on benzylic cation.
Question 23. (P) is obtained when ethyl 3-formyl-5-oxocyclohexane-carboxylate (ring with CHO, ketone and CO2Et) is treated with NaBH4; (Q) is obtained when the six-membered lactone bearing a CHO substituent (3-formyl-tetrahydropyran-2-one) is treated with LiAlH4. The sum of the number of 1° alcoholic groups in products (P) and (Q) is: (a) 1 (b) 2 (c) 3 (d) 5.
Solution. Answer (printed key): (d). Corrected: working it out, NaBH4 reduces only the CHO to CH2OH and the ketone to a secondary OH, the ester stays, so (P) has 1 primary alcohol. LiAlH4 opens the lactone to CH2OH and HOCH2CH2- (2 primary OH) and reduces CHO to CH2OH, so (Q) = HOCH2CH2CH(CH2OH)CH2OH-type triol with 3 primary OH. Sum = 1 + 3 = 4, which is not among the options; the book key is 5, so check the printed question.
Teacher's Note: NaBH4 spares esters; LiAlH4 opens lactones into two alcohols.
Exam Note: Count 1-degree OH in each product separately.
Question 24. In the presence of dil. HCl, compound A (2-aminocyclopentanol amide: cyclopentane with OH and NH-CO-C6H4-NO2(p) on adjacent carbons) is converted to a constitutional isomer (B). Compound B is: (a) amino ester: cyclopentane with NH2 and O-CO-C6H4NO2; (b) an alkene with NH2 and a hemiacetal-like O-CH(OH)Ar; (c) NH2 and O-CH(OH)-Ar on cyclopentane; (d) cyclic ortho-amide: 2-amino-1,3-dioxolane fused to cyclopentane with Ar.
Solution. Answer (from key): (a). Under acid the amide undergoes an N→O acyl shift through a five-membered cyclic intermediate; the protonated amine (ammonium) is the stable form, so the amide becomes the isomeric amino ester (as the ammonium salt).
Teacher's Note: N to O acyl migration in acid via five-membered cyclic intermediate.
Exam Note: Acid favours N to O acyl shift.
Question 25. 4-tert-Butylcyclohexanol is treated with pyridinium chlorochromate (PCC) in dichloromethane to give (A) (ten carbon atoms). Options: (a) 4-tert-butylcyclohexene; (b) 4-tert-butylcyclohexanone; (c) 4-tert-butylcyclohexene (other drawing); (d) 4-tert-butylcyclohex-2-enone.
Solution. Answer (from key): (b). PCC oxidises a secondary alcohol to a ketone without over-oxidation or elimination, giving 4-tert-butylcyclohexanone (C10H18O).
Teacher's Note: PCC stops at the ketone for secondary alcohols.
Exam Note: Secondary alcohol with PCC gives ketone.
Question 26. Ethyl 2-oxocyclopentane-carboxylate, drawn as a single enantiomer (wedge bond at the ester carbon), is reduced with LiAlH4 to 2-(hydroxymethyl)cyclopentanol. The product of the reaction is: (a) racemic (b) diastereomer (c) meso (d) optically pure.
Solution. Answer (from key): (b). The existing stereocentre is retained and a new stereocentre (CHOH) is created by hydride attack from either face. Two stereoisomers (cis and trans) that are not mirror images, i.e. diastereomers, are formed.
Teacher's Note: Existing chiral centre plus new centre gives diastereomers.
Exam Note: New stereocentre next to old one: diastereomers.
Question 27. 2-Cyclohexyl-2-hydroxyacetic acid (cyclohexylglycolic acid, a hydroxy acid) is treated with (1) EtLi (3.5 eq) then (2) H+, H2O to give (A) (65% yield). The chemist added an extra 0.5 mole of Et-Li to obtain product (A). Which is (A)? (a) 1,2-diketone Cy-CO-CH2-CO-Et type (as drawn); (b) α-hydroxy ketone Cy-CH(OH)-CO-Et; (c) α,β-unsaturated ketone Cy-CH=CH-CO-Et; (d) Cy-CH=CH-CO-Et (trans).
Solution. Answer (from key): (b). One equivalent of EtLi deprotonates the OH and a second deprotonates COOH to give a dianion; a third adds to the carboxylate carbon to form a dianionic gem-dioxide which, on aqueous H+ work-up, gives the α-hydroxy ketone Cy-CH(OH)-CO-Et. The extra 0.5 eq ensures complete conversion.
Teacher's Note: RCOOH plus RLi gives ketone; extra RLi covers OH deprotonation.
Exam Note: Count equivalents: OH, COOH, then addition.
Question 28. The esterification (HCl, equilibrium) of 4-hydroxycyclohexyl-methanol, HO-C6H10-CH2OH, with benzoic acid (Ph-CO-OH). The major product of the above esterification reaction is: (a) benzoate of the ring OH with free CH2OH; (b) benzoate of the primary CH2OH with free ring OH; (c) phenyl ether of CH2OH; (d) ring-OH benzoate (drawn at a different position).
Solution. Answer (from key): (b). The primary alcohol is less hindered and more reactive in Fischer esterification than the secondary ring OH, so the benzoate forms at CH2OH and the ring hydroxyl remains free.
Teacher's Note: Primary OH esterifies faster than hindered secondary OH.
Exam Note: Less hindered OH is esterified first.
Question 29. A 2-aryl-ethyl tosylate with a 14C label on the carbon bearing OTs (the other carbon unlabelled; Ph-14CH2... as drawn) reacts with RCO2H to give the ester in which the 14C label is found on both carbons (scrambled: the label is at the carbon bearing OCOR in one product and at the neighbouring carbon in the other). The mechanism is: (a) SN1 (b) SN2 (c) SN-NGP (d) SN-Ar.
Solution. Answer (from key): (c). Label scrambling to both carbons shows a symmetrical bridged intermediate: the phenyl ring acts as a neighbouring group (anchimeric assistance) to displace the tosylate, forming a phenonium ion. The nucleophile can then open it at either carbon, giving a 1:1 mixture of the labelled products.
Teacher's Note: Phenonium ion is a symmetric bridged intermediate that scrambles the label.
Exam Note: Aryl neighbouring-group participation scrambles labels.
Question 30. 4-Aminophenol is treated with Ac2O at 100°C to give (A). Options: (a) both N-acetyl and O-acetyl (diacetyl) compound... as drawn: O-acetyl ester with N-acetyl amide; (b) O-acetyl ester with free NH2; (c) N-acetyl amide with free OH (paracetamol); (d) meta-isomer with O-acetyl and N-acetyl.
Solution. Answer (from key): (c). The amino group is more nucleophilic than the phenolic OH, so Ac2O acetylates nitrogen selectively, giving N-(4-hydroxyphenyl)acetamide (paracetamol).
Teacher's Note: Amine is a better nucleophile than phenol toward anhydrides.
Exam Note: Paracetamol: N-acetylation, free OH.
Question 31. 4-(2-Hydroxypropan-2-yl)cyclohexyl-methanol (a cyclohexane bearing CH2OH and a tertiary alcohol C(CH3)2OH) is treated with PCC in CH2Cl2. The product is: (a) alkene (dehydrated, exocyclic C=C(CH3)2) with CH2OH; (b) aldehyde CHO with the tertiary OH retained; (c) carboxylic acid with tertiary OH; (d) ketone at ring with tertiary OH.
Solution. Answer (from key): (b). PCC oxidises a primary alcohol only to the aldehyde (no over-oxidation to acid in CH2Cl2); the tertiary alcohol has no α-H and is not oxidised or dehydrated.
Teacher's Note: PCC: primary alcohol to aldehyde; tertiary alcohol untouched.
Exam Note: PCC stops at aldehyde; tertiary OH inert.
Question 32. Which is the best reagent to convert isopropyl alcohol, (CH3)2CH-OH, to isopropyl bromide, (CH3)2CH-Br? (a) HBr (b) SOBr2 (c) Br2 (d) CH3MgBr.
Solution. Answer (from key): (b). Thionyl bromide converts the alcohol to the bromide with gaseous by-products (SO2, HBr) and without carbocation rearrangement, whereas HBr may rearrange or give mixtures, Br2 does not substitute OH and a Grignard reagent would only deprotonate the alcohol.
Teacher's Note: SOBr2 gives clean substitution, with gaseous by-products.
Exam Note: Choose SOX2 or PX3 for clean ROH to RX.
Question 33. The amino alcohol (drawn as a Newman projection: front carbon bearing NH2, Ph, H... as drawn Ph, NH2, OH, H, CH3, Ph) is treated with HNO2 to give A. The major product obtained in the above reaction is: (a) PhCO-CH(CH3)Ph (one specific configuration); (b) PhCO-CH(CH3)Ph (opposite configuration); (c) racemic; (d) diastereomers.
Solution. Answer (from key): (a). HNO2 diazotises the amine; the diazonium group leaves with concerted anti migration of the group anti to it (semipinacol/Tiffeneau-Demjanov-type rearrangement) and the oxygen-bearing carbon becomes C=O. Migration with inversion at the migration terminus gives a single stereoisomer of 1,2-diphenylpropan-1-one, option (a).
Teacher's Note: Anti-periplanar migration fixes the configuration of the product.
Exam Note: Stereospecific anti migration: draw Newman first.
Question 34. cis-1,2-Cyclohexanediol (ring with two OH, both wedged; additional wedge substituents on the ring shown) reacts with HIO4 to give (A), and then (1) LiAlH4 (excess), (2) H+ gives (B). The total number of stereoisomers of product (B) will be: (a) 2 (b) 3 (c) 4 (d) 5.
Solution. Answer (from key): (b). HIO4 cleaves the vicinal diol to a dialdehyde (A); LiAlH4 reduces it to a diol (B) with two stereocentres from the ring substituents. Because the two ends of the chain are identical, (B) has a meso form and one pair of enantiomers: 3 stereoisomers.
Teacher's Note: Two identical stereocentres: 2^2 reduced to 3 by the meso form.
Exam Note: Symmetric molecule: n=2 gives 3 isomers.
Question 35. The cis-thioacetate-acetate on a cyclopentane ring (S-CO-CH3 and O-CO-CH3 on adjacent carbons, both wedged) is treated with (1) HO-, (2) H+. The major product is: (a) trans-2-mercaptocyclopentanol; (b) cis-2-mercaptocyclopentanol; (c) cyclopentene sulfide (cis-episulfide); (d) cyclopentene oxide (cis-epoxide).
Solution. Answer (from key): (b). Hydroxide hydrolyses the thioester and the ester at the acyl carbon; no stereocentre is touched, so the cis relationship is retained and acidification gives cis-2-mercaptocyclopentanol.
Teacher's Note: Acyl hydrolysis breaks C-O(acyl) bonds, so stereochemistry is retained.
Exam Note: Hydrolysis at acyl C: configuration retained.
Question 36. The trans-thioacetate-acetate on a cyclopentane ring (S-CO-CH3 wedged, O-CO-CH3 hashed on adjacent carbons) is treated with HO⊖. Options: (a) trans-2-mercaptocyclopentanol; (b) cis-2-mercaptocyclopentanol; (c) cyclopentene sulfide (episulfide); (d) cyclopentene oxide (epoxide).
Solution. Answer (printed key): (c). Corrected: (a). Hydroxide hydrolyses both acyl groups at the carbonyl carbon (acyl C-O/C-S cleavage), so the ring C-S and C-O bonds and the trans relationship are unchanged, giving trans-2-mercaptocyclopentanol. Without a leaving group on the ring carbon, the thiolate/alkoxide cannot close an episulfide or epoxide, so the book key (c) is not supportable.
Teacher's Note: Ring carbon has no leaving group after hydrolysis, so no ring closure.
Exam Note: Trans retained; no three-membered ring forms.
Question 37. Conversion of cyclohexanone into 2-hydroxy-2-methylcyclohexanone. Reagents: (1) CH3MgBr/H+; (2) KMnO4 (cold, dilute); (3) CrO3; (4) H+/Δ. For the above conversion the correct order of reagents used is: (a) 1→2→3→4 (b) 1→4→3→2 (c) 1→4→2→3 (d) 2→3→4→1.
Solution. Answer (from key): (c). CH3MgBr gives 1-methylcyclohexanol (1); H+/Δ dehydrates it to 1-methylcyclohexene (4); cold dilute KMnO4 forms the vicinal diol (2) (tertiary + secondary OH); CrO3 oxidises only the secondary OH to the ketone (3), giving 2-hydroxy-2-methylcyclohexanone.
Teacher's Note: Build the target backwards: ketone from secondary OH of a diol from an alkene.
Exam Note: Order: Grignard, dehydrate, hydroxylate, oxidise.
Question 38. The epoxide 2,2,3-trimethyloxirane can be opened to the tertiary alcohol 2-methylbutan-2-ol (reagent x) or the secondary alcohol 3-methylbutan-2-ol (reagent y). Find the missing reagents: (a) x = LiAlH4, y = NaBH4 (b) x = LiAlH4/AlCl3, y = LiAlH4 (c) x = LiAlH4, y = LiAlH4/AlCl3 (d) x = H2/Ni, y = H2/Pt.
Solution. Answer (from key): (c). LiAlH4 alone opens the epoxide by SN2 attack of hydride at the less hindered carbon, leaving oxygen on the tertiary carbon (tertiary alcohol, x). With AlCl3 the epoxide is activated and opens with SN1 character at the more substituted carbon, so hydride adds there and the secondary alcohol forms (y).
Teacher's Note: Basic opening attacks less hindered carbon; Lewis acid opening, more substituted.
Exam Note: Hydride site depends on added AlCl3.
Question 39. In solvolysis of 1,2-dimethylpropyl p-toluenesulfonate (tosylate) in acetic acid at 75°C, (alkene + substitution products) will be formed by mechanism: (a) SN2, E2 (b) SN2, E1 (c) SN1, E2 (d) SN1, E1.
Solution. Answer (from key): (d). A secondary tosylate in the weakly basic, ionising solvent acetic acid ionises to a carbocation (SN1) which is trapped by solvent (substitution) or loses a proton (E1) to give alkenes.
Teacher's Note: Poor nucleophile, ionising solvent: unimolecular pathways.
Exam Note: Solvolysis implies SN1 with E1 as competitor.
Question 40. The keto lactone (a six-membered lactone, O=C-O in the ring, with a ketone on the ring) reacts with LiAlH4 to give (A); (A) then reacts with x Ac2O to give (B). x = moles of anhydride consumed: (a) 1 (b) 2 (c) 3 (d) 4.
Solution. Answer (from key): (c). LiAlH4 reduces the lactone to a diol (primary alcohol from C=O and primary alcohol from the ring O-CH2) and the ketone to a secondary alcohol, giving a triol (A) with three OH groups. Each OH is acetylated by one mole of Ac2O, so x = 3.
Teacher's Note: Count hydroxyls after reduction: each uses one mole of Ac2O.
Exam Note: Lactone gives two OH, ketone gives one.
Question 41. Identify the product when (R)- and (S)-2-butanol (racemic 2-butanol) react with (R,R)-tartaric acid in acidic medium: (a) racemic (b) diastereomer (c) meso (d) pure enantiomer.
Solution. Answer (from key): (b). Each enantiomer of the alcohol reacts with the single enantiomer (R,R)-tartaric acid to form an ester; (R)-alcohol/(R,R)-acid and (S)-alcohol/(R,R)-acid are not mirror images, so diastereomeric esters form.
Teacher's Note: Racemate with a pure chiral acid gives diastereomers.
Exam Note: Enantiomer plus chiral reagent gives diastereomers.
Question 42. An alcohol of formula C9H12O reacts with Na2Cr2O7 to form a compound having formula C9H10O. The original alcohol might be: (a) C6H5-CH2CH2CH2-OH (b) C6H5-CH(OH)-CH2CH3 (c) C6H5-C(CH3)2-OH (d) C6H5-CH(CH3)-CH2OH.
Solution. Answer (from key): (b). C9H12O to C9H10O is loss of 2 H, a single oxidation step to a carbonyl compound that is the end product. A secondary alcohol gives a ketone (propiophenone) and stops there. The primary alcohols (a), (d) would be oxidised on to acids, and the tertiary alcohol (c) is not oxidised.
Teacher's Note: Loss of 2H that stops there: secondary alcohol to ketone.
Exam Note: Secondary alcohol gives ketone, final product.
Question 43. An optically active alcohol of formula C9H12O2 produced terephthalic acid (HO2C-C6H4-CO2H, para) when refluxed with KMnO4. The original compound (A) also: gave H2 with Na; gave no rapid reaction with Br2; gave C9H8O3 with CrO3/H+ (cool). What is the structure of (A)? (a) 1-[4-(hydroxymethyl)phenyl]ethanol, p-HOCH2-C6H4-CH(OH)CH3; (b) 1-(4-methylphenyl)ethane-1,2-diol, p-CH3-C6H4-CH(OH)CH2OH; (c) p-CH3-C6H4-C(CH3)2OH type tertiary alcohol; (d) both (a) and (b).
Solution. Answer (from key): (d). KMnO4 gives the para diacid, so the ring is 1,4-disubstituted with side chains oxidisable at the benzylic carbon. Na liberates H2 (OH present), Br2 does not react (no C=C, no phenol) and a chiral carbon with two OH groups gives C9H8O3 (loss of 4 H) on cool CrO3. Both (a) and (b) are chiral C9H12O2 diols that satisfy all of this.
Teacher's Note: Match formula, chirality and oxidation product: two structures fit.
Exam Note: Check every option against all clues.
Question 44. Which are not cleaved by HIO4? I: glycerol; II: glycol; III: 1,3-propanediol (as printed 1,3-propenediol); IV: 1-methoxypropan-2-ol (printed methoxy-2-propanol). (a) I, II, III, IV (b) I, II (c) II, III (d) III, IV.
Solution. Answer (from key): (d). Periodic acid cleaves only compounds with two oxygen functions on adjacent carbons (vicinal diols, α-hydroxy carbonyls). Glycerol (I) and ethylene glycol (II) are vicinal diols and are cleaved; 1,3-propanediol (III) is a 1,3-diol and 1-methoxypropan-2-ol (IV) has only one free OH, so neither is cleaved.
Teacher's Note: HIO4 needs vicinal oxygen functions, not 1,3 relationship.
Exam Note: Check adjacency of OH groups before HIO4.
Question 45. Which of the following reactions require an oxidising agent? (a) CH3-CH=CH2 → CH3-CH2-CH3 (b) CH3-CH2OH → CH3CHO (c) CH3-CH2Cl → CH3-CH3 (d) CH3-CH2OH → CH3-CH2Cl.
Solution. Answer (from key): (b). Only (b) increases the oxidation state of carbon (alcohol carbon to aldehyde carbon). (a) and (c) are reductions and (d) is a substitution with no change in oxidation level.
Teacher's Note: Check carbon oxidation state: only alcohol to aldehyde increases it.
Exam Note: Oxidation = loss of H or gain of O at carbon.
Question 46. What is the major product of the reaction of 3-oxocyclohexanecarboxylic acid (single enantiomer, CO2H wedged) with NaBH4? Options: (a) 3-hydroxycyclohexanecarboxylic acid with the OH hashed (trans); (b) 3-hydroxycyclohexanecarboxylic acid with OH wedged (cis); (c) 3-oxocyclohexyl-methanol; (d) methyl 3-hydroxycyclohexane-carboxylate.
Solution. Answer (from key): (a). NaBH4 reduces the ketone but not the carboxylic acid; hydride attacks axially, from the less hindered face, placing OH equatorial and trans to the carboxyl group as in (a) (a hydroxy acid, no esterification, no reduction of COOH).
Teacher's Note: NaBH4 reduces ketone only; acid remains.
Exam Note: Ketone reduces, COOH untouched by NaBH4.
Question 47. Which of the esters shown, after reduction with LiAlH4 and aqueous work-up, will yield two molecules of only a single alcohol? (a) CH3CH2CO2CH2CH3 (b) C6H5CO2CH2C6H5 (c) C6H5CO2C6H5 (d) None of these.
Solution. Answer (from key): (b). Benzyl benzoate is reduced to two molecules of the same alcohol, benzyl alcohol (PhCH2OH from the acyl part and PhCH2OH from the alkoxy part). In (a) ethyl propanoate gives propan-1-ol + ethanol (two different alcohols), and phenyl benzoate (c) gives benzyl alcohol + phenol.
Teacher's Note: Acyl and alkoxy parts must give the same alcohol.
Exam Note: Reduce each fragment separately; compare alcohols.
Question 48. For the following reaction, RCH2OH + PCC [C5H5NH+ClCrO3-] →, select the statement that best describes the change: (a) The alcohol is oxidised to an acid and the Cr(VI) is reduced. (b) The alcohol is oxidised to an aldehyde and the Cr(VI) is reduced. (c) The alcohol is reduced to an aldehyde and the Cr(III) is oxidised. (d) The alcohol is oxidised to a ketone and the Cr(VI) is reduced.
Solution. Answer (from key): (b). PCC is a mild Cr(VI) oxidant that stops at the aldehyde stage for a primary alcohol; the oxidant itself is reduced (Cr(VI) to Cr(IV)/Cr(III)).
Teacher's Note: Oxidant is reduced as the alcohol is oxidised.
Exam Note: PCC: primary alcohol to aldehyde only.
Question 49. What is the product of the reaction of cis-2-butene (CH3CH=CHCH3 with both CH3 groups on the same side) with OsO4 (cat.), (CH3)3COOH, (CH3)3COH, HO-? The Fischer projections: 1 = meso-butane-2,3-diol (both OH on the right); 2 and 3 = the (R,R) and (S,S) enantiomers. (a) Only 1 (b) 1:1 mixture of 2 and 3 (c) Only 2 (d) 1:1:1 mixture of 1, 2 and 3.
Solution. Answer (from key): (a). OsO4 adds both oxygens to the same face of the double bond (syn addition). Syn addition to a cis alkene gives the meso diol (1); the racemic pair (2 and 3) would need a trans alkene.
Teacher's Note: Syn addition: cis alkene gives meso, trans alkene gives racemate.
Exam Note: Cis + syn addition = meso diol.
Question 50. An organic compound B is formed by the reaction of ethylmagnesium iodide (CH3CH2MgI) with a substance A, followed by treatment with dilute aqueous acid. Compound B does not react with PCC in dichloromethane. Identify A: (a) CH3CHO (b) CH3CH2COCH3 (butan-2-one) (c) H2C=O (d) ethylene oxide.
Solution. Answer (from key): (b). A Grignard reagent adds to a ketone to give a tertiary alcohol, which has no α-H and is not oxidised by PCC. Aldehydes (a) give secondary alcohols and formaldehyde (c) and ethylene oxide (d) give primary alcohols, all oxidised by PCC.
Teacher's Note: Only a tertiary alcohol resists PCC; it comes from a ketone.
Exam Note: Ketone plus Grignard gives tertiary alcohol.
Question 51. Which of the following reagents would carry out the transformation of acetophenone, C6H5COCH3, into C6H5-CD(OH)-CH3 (D = 2H, deuterium on the carbinol carbon, ordinary OH)? (a) NaBD4 in CH3OH (b) LiAlH4, then D2O (c) NaBD4 in CH3OD (d) LiAlD4, then D2O.
Solution. Answer (from key): (a). The deuterium must come from the hydride transfer (BD4-), and the oxygen must pick up ordinary H from the protic solvent CH3OH. In (c) and (d) the OH would become OD; in (b) D enters only on oxygen.
Teacher's Note: Hydride gives carbon D; solvent gives O-H or O-D.
Exam Note: Track which source supplies each isotope.
Question 52. Which sequence of steps describes the best synthesis of 2-methyl-3-pentanone, (CH3)2CH-CO-CH2CH3? (a) (1) 1-propanol + (CH3)2CHMgBr, diethyl ether; (2) H3O+; (3) PCC, CH2Cl2. (b) (1) 1-propanol + Na2Cr2O7, H2SO4, H2O, heat; (2) SOCl2; (3) (CH3)2CHCl, AlCl3. (c) (1) 1-propanol + PCC, CH2Cl2; (2) (CH3)2CHLi, diethyl ether; (3) H3O+; (4) Na2Cr2O7, H2SO4, H2O, heat. (d) (1) 2-propanol + Na2Cr2O7, H2SO4, H2O, heat; (2) CH3CH2CH2Li, diethyl ether; (3) H3O+; (4) PCC, CH2Cl2.
Solution. Answer (from key): (c). PCC converts 1-propanol to propanal; isopropyllithium adds to the aldehyde to give 2-methylpentan-3-ol (secondary alcohol); chromic acid oxidises this to the ketone 2-methyl-3-pentanone. In (a) the Grignard cannot react with an alcohol; (b) would need Friedel-Crafts-type acylation of an alkane; (d) gives a different ketone (acetone plus propyl gives 2-methylpentan-2-ol, tertiary, which cannot be oxidised).
Teacher's Note: Aldehyde plus organolithium gives secondary alcohol, then oxidise to ketone.
Exam Note: Plan: aldehyde, add R-Li, oxidise.
Question 53. Diols (I-IV) which react with CrO3 in aqueous H2SO4 and yield products that readily undergo decarboxylation on heating, are: (I) a diol HO-CH2...-CH(OH)... as drawn (primary OH at one end, secondary OH separated by several carbons); (II) HO-CH2-CH2-CH(OH)-CH2-CH3-type 1,3-diol with a primary and a secondary OH three carbons apart; (III) a diol with the two OH on non-adjacent positions not giving a keto acid; (IV) another diol as drawn. (a) I and II (b) II and III (c) II and IV (d) I and IV.
Solution. Answer (from key): (c). Chromic acid oxidises the primary OH to COOH and the secondary OH to C=O. Decarboxylation on heating requires a β-keto acid, i.e. the carbonyl carbon and the COOH carbon separated by one carbon (a 1,3-relationship of the original OH groups). Diols II and IV have this arrangement; I and III do not.
Teacher's Note: Beta-keto acid forms only from 1,3-related primary and secondary OH.
Exam Note: Look for COOH and C=O on 1,3 carbons.
Question 54. Which of the following compounds are not oxidised by HIO4? (1) CH3CH(OH)CH2OH (2) CH3COCHO (3) CH3COCOCH3 (4) CH3-CO-CH(NH2)-CH3-type α-amino compound as drawn (5) cyclohexene oxide (6) CH3OCH2CH2OH (7) HOCH2-CH(OH)... as drawn, HO-CH2-CH(OH)-CO-OH type α-hydroxy acid structure. (a) 5, 6, 7 (b) 4, 5, 6, 7 (c) 6, 7 (d) 3, 4, 5, 6, 7.
Solution. Answer (from key): (c). HIO4 cleaves C-C bonds between carbons carrying vicinal OH groups or OH/C=O (or OH/NH2) groups. The methyl ether alcohol (6) has one free OH (the OMe is blocked), and (7) as drawn is not cleaved per the book; compounds (1)-(5) as listed in the book are cleaved or react, so only (6) and (7) are not oxidised.
Teacher's Note: Need two free adjacent oxygen/nitrogen functions for periodate cleavage.
Exam Note: Blocked OH (ether) prevents periodate cleavage.
Question 55. The diol with a cyclohexene ring bearing a CH2OH group and an adjacent tertiary spiro-type carbinol (cyclopentan-1-ol attached to the ring) reacts with TsCl/pyridine at 0°C to give (A); (A) on heating at 80°C in HMPT solvent gives (B) (84%). Final product (B) will be: (a) spiro tetrahydrofuran fused to cyclohexene with a cyclopentene ring; (b) spiro tetrahydrofuran fused to cyclohexene with a saturated cyclopentane ring; (c) the same with the C=C moved; (d) the same with ring unsaturation elsewhere.
Solution. Answer (from key): (b). TsCl/pyridine tosylates the primary CH2OH selectively (the tertiary OH is hindered). On heating in a polar aprotic solvent (HMPT), the tertiary hydroxyl attacks the CH2OTs carbon in an intramolecular SN2 (Williamson-type) reaction to form a five-membered cyclic ether, a spiro-fused tetrahydrofuran; the ring C=C and the cyclopentane are unchanged.
Teacher's Note: Primary OH tosylates first; then intramolecular SN2 closes a 5-ring ether.
Exam Note: Selective tosylation, then 5-exo ring closure.
Question 56. Unknown (A) in the reaction given in Q. 55 is: (a) primary tosylate CH2OTs with the tertiary OH free; (b) CH2OH free with the tertiary tosylate; (c) CH2CH3 with tertiary OH; (d) aldehyde (CHO) with the tertiary OH.
Solution. Answer (from key): (a). The unhindered primary alcohol reacts with TsCl/pyridine; the tertiary alcohol does not, giving the primary tosylate that cyclises in the next step.
Teacher's Note: Primary alcohol is far more reactive than a tertiary alcohol toward TsCl.
Exam Note: TsCl selects the least hindered OH.
Question 57. In the given table, identify the incorrect option. The digit in the box indicates the moles of that substance. Columns: HIO4 consumed / HCO2H formed / HCHO formed. (a) HOCH2-CH(OH)-CH2OH: 2 / 1 / 2. (b) R-CH(OH)-CH(OH)-CH(OH)-CH2OH: 3 / 2 / 1. (c) HOCH2-CH(OCH3)-CH2OH: 0 / 0 / 0. (d) HOCH2-CH(OH)-CH2OCH3: 1 / 1 / 1.
Solution. Answer (from key): (d). In (d) HIO4 cleaves only the one vicinal diol (C1-C2), giving 1 HCHO and CH3OCH2CHO (an aldehyde, not formic acid); HCO2H formed is 0, not 1. The entries for (a) (glycerol: 2, 1, 2), (b) (3, 2, 1) and (c) (0, 0, 0) are correct.
Teacher's Note: Count cleavages: each vicinal pair cleaved needs one HIO4.
Exam Note: Check each C-C cleavage product separately.
Question 58. Succinic acid →(Δ) (A) →(NH3, Δ) (B) →(Br2/KOH) (C). Product (C) will be: (a) HO2C-CH2-CH2-CH2-NH2-type chain (two CH2 between CO2H and the CH2NH2); (b) HO2C-CH2-NH2 type shortened chain; (c) potassium salt of β-alanine, K+(-)O2C-CH2-CH2-NH2; (d) HO2C-CH2-CH2-Br.
Solution. Answer (from key): (c). Heating succinic acid gives succinic anhydride (A); NH3, heat gives succinimide (B). Hofmann bromamide degradation (Br2/KOH) of the imide opens it and loses one carbon as carbonate, giving the potassium salt of β-alanine (3-aminopropanoate).
Teacher's Note: Imide plus Br2/KOH undergoes Hofmann degradation to beta-amino acid salt.
Exam Note: Hofmann loses one carbon; KOH leaves carboxylate salt.
Question 59A. Given are the structures of cyclic D-glucoside, X (pyranoside) and Y (furanoside), each drawn as a Fischer-type projection with ring oxygen, OR at C-1, OH groups on the ring carbons and CH2OH at the bottom. Moles of HIO4 consumed with X and Y are respectively: (a) 2, 2 (b) 3, 3 (c) 2, 3 (d) 3, 2.
Solution. Answer (from key): (d) 3, 2. Periodic acid is consumed for each cleavage between adjacent carbons carrying free OH groups; the count of free vicinal OH groups in each ring form fixes the number of moles used: 3 for X and 2 for Y.
Teacher's Note: Count free vicinal diol cleavages in each ring form.
Exam Note: Ring oxygen blocks cleavage at that carbon.
Question 59B. Moles of formic acid formed in X and Y respectively are: (a) 1, 2 (b) 2, 1 (c) 2, 3 (d) 3, 2.
Solution. Answer (from key): (b) 2, 1. Formic acid arises from each internal carbon of a cleaved vicinal triol sequence (CH-OH between two cleavages): 2 for X and 1 for Y.
Teacher's Note: Internal CHOH carbons of a triol segment become HCOOH.
Exam Note: Middle carbons become formic acid.
Question 59C. Moles of HCHO formed are: (a) 1, 1 (b) 2, 2 (c) 1, 2 (d) 2, 1.
Solution. Answer (from key): (a) 1, 1. The terminal CH2OH carbon, when it is next to a free CHOH, is released as one mole of formaldehyde in each case.
Teacher's Note: Terminal CH2OH next to CHOH is cleaved to formaldehyde.
Exam Note: Terminal CH2OH gives HCHO.
Question 60. In which of the following group, each member gives a positive iodoform test? (a) methanol, ethanol, propanone (b) ethanol, isopropanal, methanal (c) ethanol, ethanal, isopropyl alcohol (d) propanal, propan-2-ol, propanone.
Solution. Answer (from key): (c). Iodoform positive requires a CH3-CO- or CH3-CH(OH)- group. Ethanol, ethanal and isopropyl alcohol all have it. Methanol, methanal and propanal do not.
Teacher's Note: Need CH3CO- or CH3CH(OH)- group for iodoform test.
Exam Note: Spot methyl carbinol or methyl ketone unit.
Question 61. H2O18 + Na → (A) + (B) (A is the base, Na18OH). Then CH3-CO-O-CH2-CH3 + (A) → (C) + (D) alcohol. Product (C) of the reactions is: (a) CH3-CO-18O-H, acetic acid with label on the OH oxygen; (b) acetic acid with label on the C=O oxygen; (c) CH3-CO-O- (acetate); (d) CH3-CO-O- Na+.
Solution. Answer (from key): (c). Under basic conditions the hydroxide (carrying 18O) attacks the ester carbonyl; the carboxylic acid so formed is immediately deprotonated by the alkoxide/base, so the product (C) is the acetate ion, which retains the labelled oxygen, and (D) is ethanol.
Teacher's Note: Ester hydrolysis with base gives carboxylate: irreversible.
Exam Note: Base gives carboxylate, not free acid.
Question 62A. The 4-nitrobenzoate ester of a hydroxy-alkyl cyclohexenone (enone with a side chain bearing O-CO-C6H4NO2) reacts with H2 over (Ph3P)3RhCl to give (A); (A) with 0.1 M NaOH in H2O/methanol gives (B) + (C) (C contains no nitrogen). Product (B) of the reaction is: (a) 4-nitrophenol; (b) 4-nitrobenzoate anion; (c) methyl 4-nitrobenzoate; (d) the ester retained with ketone ring.
Solution. Answer (from key): (b). Wilkinson's catalyst hydrogenates the C=C of the enone (selective for the less hindered alkene), giving the saturated ketone ester (A). Aqueous NaOH hydrolyses the ester: (B) is the 4-nitrobenzoate (carboxylate) and (C), containing no nitrogen, is the alcohol part.
Teacher's Note: Wilkinson catalyst hydrogenates C=C; ester then hydrolyses in base.
Exam Note: Hydrogenate alkene first; then saponify.
Question 62B. Product (C) of the above reaction is: (a) 3-(1-hydroxyethyl)... a hydroxy-alkyl cyclohexanone with OH at the end of the side chain, ring ketone saturated; (b) hydroxy-alkyl cyclohexanone with the alcohol on the carbon attached to ring (secondary alcohol, saturated ring ketone); (c) the same alcohol drawn at a different attachment; (d) tertiary alcohol C(CH3)2OH.
Solution. Answer (from key): (b). (C) is the alcohol released on hydrolysis of the 4-nitrobenzoate: the secondary alcohol on the side chain of the cyclohexanone, with the C=C already reduced in the first step.
Teacher's Note: Alcohol part keeps its carbon skeleton; ester O-acyl bond cleaves.
Exam Note: Hydrolysis releases the original alcohol.
Question 63. Two unknown compounds X and Y, both having molecular formula C4H8O, give the following results. X: Br2 decolourises; Na metal gives bubbles; chromic acid orange to green; Lucas reagent no reaction. Y: no reaction with any of the four tests. X and Y respectively are: (a) CH3CH2COCH3; butanal (CH3CH2CH2CHO as drawn) (b) but-3-en-1-ol; tetrahydrofuran (c) tetrahydrofuran; but-3-en-1-ol (d) CH3CH2CH2CHO; butanone.
Solution. Answer (from key): (b). X decolourises bromine (C=C), liberates H2 with Na (OH group) and is oxidised by chromic acid (primary alcohol) but does not react with Lucas reagent (primary): but-3-en-1-ol, C4H8O. Y reacts with none of the reagents: a saturated cyclic ether, tetrahydrofuran, C4H8O.
Teacher's Note: Each test removes one functional group: alkene, OH, 1-degree OH, ether left.
Exam Note: Match tests to groups; ether is inert to all four.
Question 64. Cyclohexanecarboxylic acid with LiH in dimethoxyethane gives L; then CH3Li gives M; then H3O+ gives N + CH3OH (as printed). Product (N) is: (a) methylcyclohexane; (b) cyclohexyl methyl ketone (acetylcyclohexane); (c) cyclohexanecarboxylic acid; (d) 1-cyclohexylethanol.
Solution. Answer (printed key): (c). Corrected: (b). LiH deprotonates the acid to lithium cyclohexanecarboxylate (L); CH3Li adds to the carboxylate to give the gem-dialkoxide (M); acidic work-up collapses it to the methyl ketone, cyclohexyl methyl ketone (N). Cyclohexanecarboxylic acid (c) is the starting material, so it cannot be the product. The printed by-product CH3OH does not fit this sequence.
Teacher's Note: Acid plus LiH plus MeLi is the standard route to methyl ketones.
Exam Note: Carboxylate plus RLi gives ketone after work-up.
Question 65. Assign the structure of the major product (X) of the reaction given below: mandelic acid, C6H5-CH(OH)-COOH, with (1) CH3CH2OH, HCl(g), Δ, then (2) SOCl2, Δ. Options: (a) C6H5-CH(OEt)-COOH; (b) C6H5-CH(Cl)-CO-OEt; (c) C6H5-CH(OEt)-COCl; (d) C6H5-CH=CH-CO-OEt.
Solution. Answer (from key): (b). Ethanol/HCl esterifies the carboxylic acid (Fischer) to ethyl mandelate. SOCl2 then converts the remaining alcohol OH into Cl, giving ethyl 2-chloro-2-phenylacetate.
Teacher's Note: Esterify the acid first, then SOCl2 converts the alcohol to chloride.
Exam Note: Order of steps decides which group reacts.
Question 66. Ethyl 2-chloro-2-phenylacetate, C6H5-CHCl-CO-OCH2CH3 (1 mole) + CH3COOH (acetic acid, 7 mole), HCl, Δ, 1.5 h gives (A) + (B) (B contains chlorine...as printed). Product (A) and (B) respectively are: (a) C6H5-CHCl-COOH, CH3-CO-OCH2CH3 (b) C6H5-CHCl-CO-OEt, CH3-CO-OCH3 (c) C6H5-CHCl-CO-OEt, CH3-COOH (d) C6H5-CH2Cl, CH3-COOH.
Solution. Answer (from key): (a). This is an acid-catalysed exchange (trans-esterification between acids). The large excess of acetic acid (7 mol) pushes the equilibrium so that the ethyl group is transferred to acetic acid, giving ethyl acetate and the free acid, 2-chloro-2-phenylacetic acid (the chlorine is retained).
Teacher's Note: Le Chatelier: excess acetic acid drives ester exchange.
Exam Note: Equilibrium is shifted by large excess of one reactant.
Question 67. Methyl acrylate, H2C=CH-CO-OCH3 (bp 81°C), + n-butyl alcohol (bp 117°C), TsOH, Δ gives (A) (bp 145°C) + CH3OH (bp 65°C). Product (A) is: (a) the ester of acrylic acid with the n-alkyl alcohol, H2C=CH-CO-O-(CH2)nCH3 (butyl acrylate as drawn: O-CH2CH2CH3... printed with propyl chain); (b) H2C=CH-CO-O-CH(CH3)2; (c) the β-methoxy ester H2C(OCH3)-CH2-CO-OCH3; (d) CH3-(CH2)4-CO-O-CH3.
Solution. Answer (from key): (a). Acid-catalysed trans-esterification: the lower-boiling methanol is distilled off, shifting the equilibrium to the n-alkyl acrylate (A). The C=C is untouched (no conjugate addition under these conditions).
Teacher's Note: Distilling off low-boiling methanol drives transesterification.
Exam Note: Remove the volatile product to shift equilibrium.
Question 68. Glycerol, HOCH2-CH(OH)-CH2OH, + 3 Ac2O (acetic anhydride) →. In the above reaction the molecular formula of glycerol increases by: (a) C4H4O2 (b) C6H6O6 (c) C6H6O2 (d) C6H6O3.
Solution. Answer (from key): (d). Each OH is acetylated (H replaced by COCH3), a net gain of C2H2O per OH. For three OH groups the gain is C6H6O3: glycerol C3H8O3 becomes glyceryl triacetate C9H14O6.
Teacher's Note: Each acetylation adds C2H2O; multiply by number of OH groups.
Exam Note: Verify by subtracting formulae: C9H14O6 - C3H8O3.
Question 69. Give the best conditions for the transformation of a straight-chain aldehyde (CH3-CH2-CH2-CHO type, as drawn) into its dimethyl acetal, R-CH(OCH3)2: (a) CH3OH, H+ (cat.), heat (b) H2O, H+ (cat.), heat (c) Mg, ether, CH3OH (d) SOCl2, CH3OH.
Solution. Answer (from key): (a). Aldehydes form acetals with excess alcohol under acid catalysis (CH3OH, H+). Water/acid (b) would hydrolyse the acetal; (c) and (d) do not form acetals.
Teacher's Note: Acetal needs alcohol plus acid catalyst, with water removed.
Exam Note: Aldehyde plus 2 ROH, H+ gives acetal.
Question 70. Give the major organic product of the following reaction: cyclohexanone treated with (1) sodium acetylide, (2) H2O, H+ (to neutralise). Options: (a) 2-ethynylcyclohexanone; (b) cyclohex-1-en-1-ol (enol); (c) 1-ethynylcyclohexan-1-ol; (d) 1,1-diethynylcyclohexane.
Solution. Answer (from key): (c). The acetylide ion adds to the carbonyl carbon (nucleophilic addition) giving an alkoxide, which on protonation gives the tertiary propargylic alcohol 1-ethynylcyclohexanol.
Teacher's Note: Acetylide is a carbon nucleophile: it adds to C=O to form propargylic alcohol.
Exam Note: Nucleophilic addition, then proton work-up.
Question 71. Product (D): 2-(hydroxymethyl)cyclohexanol (a ring with OH and CH2OH on adjacent carbons) is treated with PCC to give (A); (A) with ethylene glycol, H+ gives (B); (B) with (1) MeMgBr, (2) H3O+ gives (C); (C) with NaBH4, EtOH gives (D). Options: (a) the starting diol; (b) 2-(hydroxymethyl)-1-methylcyclohexan-1-ol; (c) 1-ethyl-diol with OH on ring; (d) ring with a tertiary OH and a CH(OH)CH3 side chain.
Solution. Answer (from key): (b). PCC oxidises the secondary alcohol to the ketone and the primary to the aldehyde (A). Ethylene glycol/H+ protects the more reactive aldehyde as a cyclic acetal (B). MeMgBr adds to the ketone to give a tertiary alcohol, and the aqueous acid work-up also removes the acetal giving the hydroxy-aldehyde (C). NaBH4 reduces the CHO to CH2OH: (D) = tertiary alcohol (1-methyl) with adjacent CH2OH.
Teacher's Note: Protect the aldehyde, let Grignard hit the ketone, then deprotect and reduce.
Exam Note: Aldehyde is the more reactive carbonyl: protect first.
Question 72. Select the best method for the preparation of the following compounds: trans-2-methylcyclohexanol (both enantiomers, drawn as OH and CH3 on adjacent carbons on opposite faces). (a) reaction of cyclohexanone with CH3Li (b) reaction of 1-methylcyclohexene with Hg(OAc)2 followed by NaBH4 (c) reaction of cyclohexene with BH3; NaOH/H2O2, following by CH3Br (d) reaction of cyclohexene with MCPBA, followed by CH3MgBr.
Solution. Answer (from key): (d). MCPBA gives cyclohexene oxide; CH3MgBr opens it by SN2 backside attack, so CH3 and OH end up trans on adjacent carbons (racemic trans-2-methylcyclohexanol). (a) gives 1-methylcyclohexanol, (b) gives the same Markovnikov tertiary alcohol and (c) gives cyclohexanol/ether.
Teacher's Note: Epoxide opening by a nucleophile always gives trans (anti) product.
Exam Note: Epoxide plus Grignard gives trans-2-substituted alcohol.
Question 73. Identify the reagents (1-4) required for the transformations shown and arrange them in the correct order. The sequence starts from the cyclobutane bearing two Ph groups and two CHO-type groups: [1] gives the diol HOH2C ... CH2OH; H+ closes the cyclic ether (tetrahydrofuran) ring; [2] gives the vicinal diol; [3] gives the diketone (ring-cleaved dicarbonyl); [4] gives the final diol. Reagents: (1) LAH (LiAlH4) (2) OsO4 (3) NaIO4 (4) NaBH4. (a) 1→3→4→2 (b) 2→3→1→4 (c) 2→1→3→4 (d) 1→2→3→4.
Solution. Answer (from key): (d) 1→2→3→4. LiAlH4 reduces the dialdehyde/diester to the diol; H+ forms the cyclic ether. OsO4 then dihydroxylates the C=C to a vicinal diol, NaIO4 cleaves that diol to the dicarbonyl compound and NaBH4 reduces the carbonyls to the final diol.
Teacher's Note: Reduce, cyclise, dihydroxylate, cleave, reduce: order follows the structures.
Exam Note: Match each reagent to its functional-group change.
Question 74. Which describes the best stereochemical aspects of the following reaction? The tertiary alcohol Ph-C(CH3)(CD3)-OH reacts with HBr to give the product. (a) Inversion of configuration occurs at the carbon undergoing substitution. (b) Retention of configuration occurs at the carbon undergoing substitution. (c) Racemisation (loss of configuration) occurs at the carbon undergoing substitution. (d) The carbon undergoing substitution is not stereogenic.
Solution. Answer (from key): (c). The tertiary, benzylic alcohol reacts by SN1: the planar benzylic carbocation is attacked by Br- from either face with equal probability, so configuration is lost (racemisation). The carbon is stereogenic (CH3 and CD3 differ isotopically).
Teacher's Note: Planar carbocation gives equal attack from both faces: racemisation.
Exam Note: Tertiary benzylic substrate implies SN1, racemisation.
Question 75. Which of the following is an example of pinacol-diazotisation? (a) Me2C(OH)-CMe2Br with Ag+ → Me-CO-CMe3 (b) Me2C(OH)-CMe2NH2 with NaNO2/HCl → Me-CO-CMe3 (further options as printed).
Solution. Answer (from key): (b). Pinacol-diazotisation is the semipinacol rearrangement of a β-amino alcohol: HNO2 converts NH2 into a diazonium leaving group (N2 lost), a methyl group migrates and the oxygen-bearing carbon becomes C=O, giving pinacolone. In (a) the leaving group is generated by Ag+ from a bromide, not by diazotisation.
Teacher's Note: Diazonium of beta-amino alcohol triggers semipinacol shift to ketone.
Exam Note: Name the leaving-group generation step.
Question 76. (A) C5H10O with H3O+ gives B + C; (B) and (C) both give a positive iodoform test. Compound (A) is: (a) CH3-CH=CH-O-CH2CH3 (b) (CH3)2CH-O-CH2CH3 (c) CH2=C(CH3)-O-CH2CH3 (d) both (b) and (c).
Solution. Answer (printed key): (d). Corrected: (c). Only (c) has the formula C5H10O (the formula of (b) is C5H12O, and an ordinary ether is not hydrolysed by aqueous acid). The enol ether (c) is hydrolysed by H3O+ to acetone (via the enol, CH3COCH3) and ethanol, and both acetone and ethanol give the iodoform test. Option (a) would give propanal, which does not.
Teacher's Note: Check formula first: enol ether hydrolyses to a ketone plus alcohol.
Exam Note: Both products must contain CH3CO or CH3CH(OH).
Question 77. A solution of Ph3C-CO2H in conc. H2SO4 gives (X) when poured into methanol. X is: (a) Ph3C-CO-OCH3 (b) Ph2CH-CO-OCH3 (c) Ph3C-OCH3 (d) Ph3C-CH3.
Solution. Answer (from key): (c). In conc. H2SO4 the acid loses H2O and CO (decarbonylation) to give the very stable triphenylmethyl (trityl) cation. Pouring into methanol traps the cation to give trityl methyl ether, Ph3C-OCH3. The acid cannot esterify because the carboxyl is hindered.
Teacher's Note: Trityl cation is exceptionally stable; CO is lost from the acylium.
Exam Note: Conc. H2SO4 with a tertiary acid: lose CO, then trap cation.
Question 78. 1-Tetralol (1,2,3,4-tetrahydronaphthalen-1-ol) is treated with TsCl/pyridine to give (A); (A) with LiAlH4 gives (B). Product (B) is: (a) 1,2-dihydronaphthalene; (b) 1,4-dihydronaphthalene-type alkene; (c) tetralin (1,2,3,4-tetrahydronaphthalene); (d) 1-chlorotetralin.
Solution. Answer (from key): (c). TsCl/pyridine converts the OH into the tosylate (a good leaving group) without breaking the C-O bond. LiAlH4 then displaces the tosylate by hydride (SN2 at the benzylic carbon), giving tetralin.
Teacher's Note: Tosylate turns OH into a leaving group; hydride replaces it.
Exam Note: Alcohol to alkane via tosylate then LiAlH4.
Question 79. In the given pair of alcohols, in which pair is the second alcohol more reactive than the first towards hydrogen bromide? (a) 1-methylcyclopentanol and cyclohexanol (as drawn: tertiary and secondary) (b) 1-alkylcyclopentanol and 1-cyclopentylethanol (tertiary and secondary) (c) butan-2-ol and 2-methylbutan-1-ol (secondary and primary) (d) butan-2-ol and 2-methylbutan-2-ol (secondary and tertiary).
Solution. Answer (from key): (d). Reaction with HBr is SN1, so reactivity follows carbocation stability (tertiary > secondary > primary). Only in (d) is the second alcohol (tertiary) more reactive than the first (secondary). In (a) and (b) the first member is the tertiary one; in (c) the second is primary.
Teacher's Note: SN1 rate follows carbocation stability.
Exam Note: Rank by degree of alcohol: 3 > 2 > 1.
Question 80. Rank the transition states that occur during the following reaction steps in order of increasing stability (least to most stable): 1. H3C-OH2+ → CH3+ + H2O; 2. (CH3)3C-OH2+ → (CH3)3C+ + H2O; 3. (CH3)2CH-OH2+ → (CH3)2CH+ + H2O. (a) 1 < 2 < 3 (b) 2 < 3 < 1 (c) 1 < 3 < 2 (d) 2 < 1 < 3.
Solution. Answer (from key): (c) 1 < 3 < 2. The transition state resembles the carbocation formed, so its stability follows carbocation stability: methyl (least stable) < secondary (isopropyl) < tertiary (most stable).
Teacher's Note: Late TS resembles the carbocation, so same stability order.
Exam Note: Methyl < secondary < tertiary cation.
Question 81. The unsaturated diol HO-CH2-CH2-CH=CH-CH(OH)... as drawn (a diol with one allylic OH and one saturated primary OH) is treated with MnO2 to give (A). Product (A) is: (a) a dialdehyde-type structure O=CH- ... with OH; (b) HO-chain-CH=CH-CHO; (c) HO-chain-CH=CH-CHO as drawn with the allylic OH converted to CHO; (d) the corresponding carboxylic acid.
Solution. Answer (from key): (c). MnO2 selectively oxidises allylic (and benzylic) alcohols to the carbonyl compound and leaves a non-allylic alcohol untouched. The allylic CH2OH becomes CHO (the aldehyde, not the acid), and the other OH remains.
Teacher's Note: MnO2 is selective for allylic/benzylic OH and stops at aldehyde.
Exam Note: MnO2 oxidises only allylic OH.
Question 82. In which of the following reactions will hydrogen gas not be evolved? (a) CH3CH2OH + Na (b) CH3CH2OH + K (c) (CH3)2CH-OH + Al (d) (CH3)2CH-OH + CH3MgBr.
Solution. Answer (from key): (d). Active metals Na, K and Al react with alcohols to give alkoxides and H2. A Grignard reagent reacts with the acidic O-H to give the alkoxide and methane (CH4), not hydrogen gas.
Teacher's Note: Grignard deprotonates ROH giving alkane, not H2.
Exam Note: Gas evolved is CH4 with Grignard.
Question 83. (A) →(PBr3) (C) →(Mg, ether) Grignard reagent; (A) →(Na2Cr2O7, H2SO4) (B). When the Grignard reagent reacts with (B), the product (D) obtained, after H3O+, is 3,4-dimethylhexan-3-ol. Reactant (A) of the above reaction is: (a) butan-2-ol (b) butan-1-ol (c) a branched alcohol (as drawn) (d) pentan-2-ol type.
Solution. Answer (from key): (a). The target CH3CH2-C(OH)(CH3)-CH(CH3)CH2CH3 is the tertiary alcohol obtained from butan-2-one plus sec-butylmagnesium bromide. Butan-2-ol, the single starting alcohol (A), gives sec-butyl bromide (PBr3) → Grignard (C), and butan-2-one (B) on oxidation with Na2Cr2O7/H2SO4.
Teacher's Note: Same alcohol supplies both the ketone and the Grignard.
Exam Note: Disconnect the tertiary alcohol into ketone plus RMgX.
Question 84. (A) →(LiAlH4) 2(B) (chiral alcohol only); the structure of (A) is: (a) CH3-CH(Et)-CO-O-CH(CH3)Et (secondary alkyl ester) (b) CH3-CH(Et)-CO-O-CH2-CH(CH3)Et (c) an ester drawn in line form with a branched acyl and alkyl group (d) a ketone, pentan-3-one.
Solution. Answer (from key): (b). LiAlH4 reduces an ester to two alcohols. For 2 moles of one chiral alcohol, both fragments must reduce to the same chiral alcohol: the acyl part CH3CH(Et)CO- gives 2-methylbutan-1-ol, HOCH2CH(CH3)Et, and the alkoxy part -OCH2CH(CH3)Et is the same alcohol. 2-Methylbutan-1-ol is chiral.
Teacher's Note: Both ester halves must reduce to the same alcohol.
Exam Note: Acyl part and alkoxy part give identical alcohols.
Question 85. The conversion of 4-nitrocyclohexanone into 4-nitrocyclohexanol can be achieved by: (a) LiAlH4 (b) NaBH4 (c) H2/Ni (d) CrO3.
Solution. Answer (from key): (b). NaBH4 is selective for the carbonyl group and does not reduce the aliphatic NO2. LiAlH4 and H2/Ni would also reduce the nitro group, and CrO3 is an oxidant.
Teacher's Note: NaBH4 reduces C=O but leaves nitro group.
Exam Note: Choose the mild selective reductant.
Question 86. Mandelic acid, C6H5-CH(OH)-COOH, + EtOH, HCl (86%). Identify the product of the above Fischer esterification reaction: (a) Ph-CH(OEt)-CO2H (b) the cyclic lactide-type compound (epoxide-like ring, as drawn) (c) Ph-CH(OH)-CO2Et (d) Ph-CH(OH)-CO-Et.
Solution. Answer (from key): (c). Fischer esterification converts the carboxylic acid group into the ethyl ester; the benzylic alcohol is not etherified under these conditions, giving ethyl mandelate.
Teacher's Note: Fischer esterification affects COOH only, not alcohol OH.
Exam Note: Acid plus alcohol gives ester; OH unchanged.
Question 87. The ketal-protected keto acid CH3-C(OCH2CH2O)-CH2CH2-COOH reacts with CH3Li to give (A), CH3Li to give (B), then H3O+ to give (C). Product (C) is: (a) CH3-CO-CH2CH2-C(OH)(CH3)2 (b) CH3-C(OH)(CH3)-CH2CH2-C(OH)(CH3)2 (c) CH3-CO-CH2CH2-CO-CH3 (d) CH3-CO-CH2-CO-CH3.
Solution. Answer (from key): (c). The first CH3Li deprotonates the acid to the lithium carboxylate (A); the second adds to the carboxylate to give the dianion (B), which collapses to the methyl ketone on aqueous acid. H3O+ also removes the ketal, giving the diketone hexane-2,5-dione. The ketal protected the other ketone from CH3Li.
Teacher's Note: Carboxylate plus RLi stops at ketone; acid work-up removes ketal too.
Exam Note: Protecting group is removed by the aqueous acid.
Question 88. What is the major product of the following reaction? CH3-CH(OH)-CH2-CH2-OH + CrO3/pyridine (cold). Options: (a) CH3-CH(OH)-CH2-CHO (b) CH3-CO-CH2-CHO (c) CH3-CO-CH2-COOH (d) CH3-CH(OH)-CH2-COOH.
Solution. Answer (from key): (b). CrO3-pyridine (Collins reagent) is an anhydrous mild oxidant: the primary alcohol stops at the aldehyde (no acid), and the secondary alcohol is oxidised to the ketone, giving 3-oxobutanal.
Teacher's Note: Collins reagent oxidises both OH groups, stopping at aldehyde.
Exam Note: Anhydrous CrO3-pyridine stops at aldehyde.
Question 89. The major reason that phenol is a better Bronsted acid than cyclohexanol is that: (a) it is a better proton donor. (b) the cyclohexyl group is an electron donating group by induction, which destabilises the anion formed by resonance. (c) phenol is able to stabilise the anion formed in the reaction. (d) the phenyl group is an electron withdrawing group by induction, which stabilises the anion.
Solution. Answer (from key): (d). The sp2 phenyl carbon withdraws electrons inductively from the O-H oxygen and stabilises the phenoxide anion, making phenol the stronger acid. (Resonance delocalisation of the negative charge into the ring is the other contributing factor and is usually quoted as the main reason.)
Teacher's Note: Phenoxide anion stabilised by ring: induction (and resonance).
Exam Note: Answer as the book's key; mention resonance too.
Question 90. Which of these reagents would accomplish the following reduction? N≡C-CH2-CO-CH2-CH=CH2 → N≡C-CH2-CH(OH)-CH2-CH=CH2. (a) NaBH4 (b) LiAlH4 (c) 1 mole H2, poisoned catalyst, low pressure (d) H3O+.
Solution. Answer (from key): (a). Only the ketone must be reduced, leaving the C≡N and C=C intact. NaBH4 reduces aldehydes and ketones selectively; LiAlH4 would also reduce the nitrile and H2 would attack the C=C.
Teacher's Note: NaBH4 is chemoselective for ketone over nitrile and alkene.
Exam Note: Choose the most chemoselective reductant.
Question 91. Ethyl cyclohexylideneacetate (cyclohexane ring with =CH-CO2Et) →(A) cyclohexylidene-ethanol (=CH-CH2OH) →(MnO2) (B). Identify A and B: (a) A = NaBH4, B = the unsaturated acid =CH-CO2H (b) A = NaBH4, B = the unsaturated aldehyde =CH-CHO (c) A = LiAlH4, B = the unsaturated aldehyde =CH-CHO (d) A = LiAlH4, B = the unsaturated acid =CH-CO2H.
Solution. Answer (from key): (c). An ester needs LiAlH4 (NaBH4 does not reduce esters) to give the allylic alcohol, with the C=C retained. MnO2 oxidises the allylic alcohol selectively to the α,β-unsaturated aldehyde (it does not go on to the acid).
Teacher's Note: Ester needs LiAlH4; MnO2 stops at allylic aldehyde.
Exam Note: Ester to alcohol: LiAlH4. Allylic OH: MnO2.
Question 92. Ph-CH2-CH(OH)-CH3 reacts with K, then C2H5Br to give (A). Product (A) in the above reaction is: (a) Ph-CH2-CH(OEt)-CH3 (inversion) (b) Ph-CH2-CH(OEt)-CH3 (retention) (c) Ph-CH2-CH(OEt)-CH3 (racemic) (d) Ph-CH=CH-CH3.
Solution. Answer (from key): (b). K converts the alcohol to its potassium alkoxide (no bond to the stereocentre carbon is broken). The alkoxide then attacks ethyl bromide (Williamson synthesis, SN2 at the ethyl carbon), so the configuration at the stereocentre is retained.
Teacher's Note: C-O bond at the stereocentre is never broken: retention.
Exam Note: Williamson: the stereocentre keeps its configuration.
Question 93. Ph-CO-OH + CH3-O18-H ⇌(H+) (X) + H2O. Identify X: (a) X = Ph-CO-O18-CH3 (trans-esterification) (b) X = Ph-CO-O18-CH3 (esterification reaction) (c) X = Ph-CO-O18-CH3 (saponification) (d) X = Ph-CO-O-CH3 (hydrolysis).
Solution. Answer (from key): (b). The labelled ester Ph-CO-18O-CH3 is formed (the alcohol oxygen is retained) by acid-catalysed esterification. The label is not lost to water, which comes from the acid OH and the alcohol H; the reaction is esterification, not trans-esterification, saponification or hydrolysis.
Teacher's Note: Name the reaction correctly: acid plus alcohol is esterification.
Exam Note: Alcohol oxygen stays in the ester.
Download MS Chauhan Solutions for JEE Math PDF
Chapter-wise MS Chauhan Solutions: MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 6 Alcohal Ethers And Epoxides Part 1
Access the complete chapter-wise PDF for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 6 Alcohal Ethers And Epoxides Part 1. These structured MS Chauhan Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Additional Study Materials for 2026
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.