Previous Year Question Papers for Class 12 Economics
Access comprehensive previous year question papers for Class 12 Economics using the ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions. Designed to align with the 2026-27 ISC academic guidelines, these solved papers help students assess their exam readiness and understand official marking schemes.
Practice Class 12 Economics Exam Papers
Access the complete question paper PDF for Class 12 Economics below. Regular practice with these targeted exam papers builds familiarity with standard question patterns and helps secure higher marks in final evaluations.
ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions
PART I (20 Marks)
Question 1
Answer briefly each of the following questions (i) to (x): [20 Marks]
(i) What is production function? [2 Marks]
Answer:
Production function is a technical or functional relationship between physical inputs (factors of production) and physical output of a firm, keeping technology constant. It is expressed as: X = f(L, K), where X is output, L is labour, and K is capital.
Teacher's Note:
a) Ensure the definition emphasizes physical quantities rather than monetary values.
b) Students often forget to mention the assumption of a given level of technology.
(ii) Explain the meaning of income effect. [2 Marks]
Answer:
Income effect refers to the change in the quantity demanded of a commodity resulting exclusively from a change in the real income (or purchasing power) of the consumer, caused by a change in the price of the commodity, while relative prices of other goods remain constant.
Teacher's Note:
a) Real income changes due to price fluctuations, not necessarily nominal income.
b) For normal goods, the income effect is positive, whereas for inferior goods, it is negative.
(iii) What is progressive tax? [2 Marks]
Answer:
A progressive tax is a tax in which the rate of taxation increases as the income of the taxpayer increases. In other words, higher-income earners pay a higher percentage of their income in taxes compared to lower-income earners.
Teacher's Note:
a) It is designed to reduce income inequalities in an economy.
b) Income tax in India is a prime example of a progressive tax system.
(iv) State the law of Diminishing Marginal Utility. Mention any two assumptions of the law. [2 Marks]
Answer:
The law of Diminishing Marginal Utility states that as a consumer consumes more and more units of a commodity successively, the marginal utility derived from each successive unit goes on declining, other things remaining constant. Two assumptions are: 1. Consumption is continuous without any time gap. 2. Units of consumption are standard and homogeneous.
Teacher's Note:
a) State the law precisely including the ceteris paribus clause.
b) Ensure assumptions like rational consumer and cardinal measurement of utility are clearly mentioned if asked.
(v) Differentiate between autonomous capital flow and accommodating capital flow. [2 Marks]
Answer:
1. Autonomous capital flows refer to international economic transactions undertaken for economic motives such as profit maximization, independent of the country's balance of payments status (above the line items).
2. Accommodating capital flows refer to transactions undertaken by monetary authorities to bridge the imbalance in the balance of payments, i.e., surplus or deficit (below the line items).
Teacher's Note:
a) Autonomous items are determined by profit, while accommodating items are determined by BOP status.
b) Autonomous flows can occur in both current and capital accounts, whereas accommodating flows are restricted to capital account.
(vi) What is meant by MPS? How is MPS related to investment multiplier? [2 Marks]
Answer:
Marginal Propensity to Save (MPS) is the ratio of change in total savings to change in total income (MPS = ΔS / ΔY). MPS is inversely related to the investment multiplier (k). The formula is k = 1 / MPS.
Teacher's Note:
a) Higher the MPS, lower will be the value of the investment multiplier.
b) State both the definition formula and the mathematical relationship clearly to secure full marks.
(vii) Briefly explain any one primary function of money. [2 Marks]
Answer:
Medium of exchange: Money acts as an intermediate in the trade of goods and services. It eliminates the cumbersome double coincidence of wants inherent in the barter system by allowing goods to be sold for money and money to be used to buy other goods.
Teacher's Note:
a) Primary functions include medium of exchange and measure of value.
b) Clearly explain how it solves the drawbacks of the barter system.
(viii) Show with the help of a diagram, a situation when change in supply will keep the equilibrium quantity of the commodity unchanged. [2 Marks]
Answer:
The equilibrium quantity of a commodity remains unchanged when a decrease in demand is exactly offset by an appropriate shift, or more typically when the demand is perfectly inelastic (vertical straight line), any change in supply will change the equilibrium price while the equilibrium quantity remains completely unchanged.
[Figure: A graph showing a vertical demand line (D) intersecting a horizontal axis quantity (Q) where shifts in supply curves (S1 to S2) alter the equilibrium price (P1 to P2) but the equilibrium quantity (Q) remains constant at the vertical drop.]
Teacher's Note:
a) This scenario specifically occurs when demand is perfectly inelastic (e_d = 0).
b) Label the axes, initial and new supply curves, and equilibrium points clearly in the diagram.
(ix) What is meant by selling cost? Name one market where selling cost is applicable. [2 Marks]
Answer:
Selling costs refer to the expenditure incurred by a firm on advertising, sales promotion, publicity, and customer service to persuade buyers to purchase its product rather than competitors' products. It is applicable in monopolistic competition (or oligopoly).
Teacher's Note:
a) Selling costs are distinct from production costs.
b) Mentioning monopolistic competition fulfills the second part of the question accurately.
(x) What is meant by operating surplus? [2 Marks]
Answer:
Operating surplus is the sum of income from property and entrepreneurship generated in the production process. It includes rent, interest, royalty, and profit.
Teacher's Note:
a) Operating surplus arises in both public and private corporate sectors.
b) It excludes compensation of employees and mixed income of self-employed.
SECTION B
PART II (60 Marks)
Answer any five questions.
Question 2
(a) Explain the geometric method of calculating elasticity of supply. [3 Marks]
Answer:
1. The geometric method measures price elasticity of supply at a specific point on a linear supply curve by extending the supply curve downwards so that it cuts the X-axis (quantity axis) either at the origin, to the left of the origin, or to the right of the origin.
2. Formula: Elasticity of supply at a point = (Extension of the quantity axis from the origin to the point of tangency) / (Quantity corresponding to that point). Alternatively, it is measured by the ratio of the segment on the quantity axis to the total quantity.
3. If the extended supply curve cuts the X-axis to the left of the origin, elasticity is greater than one (Es > 1). If it cuts at the origin, elasticity is equal to one (Es = 1). If it cuts to the right of the origin, elasticity is less than one (Es < 1).
Teacher's Note:
a) Explain the intercept on the quantity axis clearly.
b) Draw a neat diagram showing the three cases of elasticity based on the intersection point on the X-axis.
(b) Explain the concept of Diminishing Marginal Rate of substitution and show how it affects the indifference curve. [3 Marks]
Answer:
1. Marginal Rate of Substitution (MRS) refers to the rate at which a consumer is willing to substitute one commodity (say Y) for another commodity (say X) without changing the total level of satisfaction: MRS_xy = ΔY / ΔX.
2. The Law of Diminishing Marginal Rate of Substitution states that as a consumer gets more and more units of commodity X, the willingness to sacrifice units of commodity Y for each additional unit of X continuously falls.
3. Because of the diminishing marginal rate of substitution, the indifference curve is convex to the origin.
Teacher's Note:
a) Define MRS clearly with the change ratio.
b) Connect the psychological principle of diminishing willingness to substitute directly to the convexity property of the indifference curve.
(c) The marginal utility schedule of a rational consumer is given below. If the price of a commodity is ₹ 35, explain with the help of a diagram, how the consumer attains equilibrium. [6 Marks]
| Number of the commodity bought | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| MU | 50 | 45 | 40 | 35 | 30 |
Answer:
1. Condition for consumer equilibrium in case of a single commodity: Marginal Utility in terms of money (MU_m) must be equal to the price of the commodity (P), i.e., MU_x = P_x.
2. Given Price = Rs. 35. Looking at the schedule, the consumer is in equilibrium when buying 4 units, because at the 4th unit, MU_x = 35, which equals the price.
3. If consumption is less than 4 units (e.g., 2 units), MU (45) is greater than price (35), meaning the consumer gains by buying more. If consumption is more than 4 units (e.g., 5 units), MU (30) is less than price (35), meaning the consumer loses by buying more, so they reduce consumption until equilibrium is restored at 4 units.
[Figure: A diagram plotting units of the commodity on the X-axis and Marginal Utility / Price on the Y-axis. A horizontal straight line represents Price at Rs. 35. The downward-sloping MU curve intersects the Price line at 4 units, indicating consumer equilibrium.]
Teacher's Note:
a) Clearly state the equilibrium condition equations.
b) Explain both conditions (excess satisfaction and disutility of over-consumption) to substantiate the final equilibrium point of 4 units.
Question 3
(a) Explain any two reasons for the supply curve to be positively sloped. [3 Marks]
Answer:
1. Law of Diminishing Returns: As more units of variable factors are applied to fixed factors, marginal productivity falls, leading to an increase in marginal cost. Producers will only supply more if the price rises to cover higher marginal costs.
2. Profit Maximization Objective: Higher prices for a commodity increase profit margins, providing an incentive for existing firms to expand production and new firms to enter the industry.
Teacher's Note:
a) Highlight cost increases and profit motives as primary drivers of upward slopes.
b) Keep explanations concise and structured in distinct points.
(b) Briefly explain how equilibrium price is determined with the help of demand and supply curves. [3 Marks]
Answer:
1. Market equilibrium is determined at the point where market demand equals market supply (D = S), representing the intersection of the demand curve and the supply curve.
2. If the price is higher than the equilibrium price, supply exceeds demand, causing excess supply or surplus, which forces sellers to lower prices. If the price is lower than the equilibrium price, demand exceeds supply, causing excess demand or shortage, which drives prices up.
3. The market forces continue to operate until the price settles at the level where market demand equals market supply, establishing the equilibrium price.
Teacher's Note:
a) Emphasize the intersection point of demand and supply curves.
b) Explain the adjustment mechanism of surplus and shortage briefly.
(c) Discuss the three stages of the Law of Variable Proportions with the help of diagrams. In which stage will a rational producer like to operate? [6 Marks]
Answer:
1. Stage I (Increasing Returns): Total Product (TP) increases at an increasing rate initially and then at a diminishing rate. Marginal Product (MP) rises, reaches a maximum, and starts falling. Average Product (AP) is continuously rising and reaches its maximum at the end of this stage.
2. Stage II (Diminishing Returns): Total Product continues to increase at a diminishing rate and reaches its maximum point. Marginal Product declines continuously and becomes zero at the end of this stage. Average Product starts falling.
3. Stage III (Negative Returns): Total Product starts declining. Marginal Product becomes negative. Average Product continues to fall but remains positive.
4. A rational producer will always choose to operate in Stage II, because in Stage I the potential of fixed factors is not fully utilized, and in Stage III MP is negative, making the addition of extra variable factors counterproductive.
[Figure: A two-part diagram. The upper panel shows the Total Product (TP) curve rising to a maximum. The lower panel shows corresponding Marginal Product (MP) and Average Product (AP) curves divided into three vertical stages corresponding to MP rising, falling to zero, and becoming negative.]
Teacher's Note:
a) Clearly delineate the boundaries of the three stages based on MP and AP behavior.
b) Provide a logical economic reason for operating in Stage II.
Question 4
(a) When price of commodity X changes from ₹ 40 per unit to ₹ 20 per unit, its demand increases by 20 units. If price elasticity of demand is 0·5, calculate the initial and the final quantity demand of commodity X. [3 Marks]
Answer:
Given:
Initial Price (P) = Rs. 40
New Price (P1) = Rs. 20
Change in Price (ΔP) = 20 - 40 = - 20
Change in Demand (ΔQ) = + 20 units
Price Elasticity of Demand (Ed) = 0.5
Formula: Ed = (- ΔQ / ΔP) × (P / Q)
0.5 = (- 20 / - 20) × (40 / Q)
0.5 = 1 × (40 / Q)
0.5Q = 40
Q = 40 / 0.5 = 80 units (Initial Quantity)
Final Quantity (Q1) = Initial Quantity + Change in Demand = 80 + 20 = 100 units.
Teacher's Note:
a) Show formula substitution steps clearly.
b) Note that price elasticity is treated as positive in absolute terms for standard calculations here.
(b) Explain with the help of a diagram, the relationship between MR and TR under imperfect competition. [3 Marks]
Answer:
1. Total Revenue (TR) increases at a diminishing rate as more units are sold and eventually reaches a maximum when Marginal Revenue (MR) is zero.
2. When TR is at its maximum, MR is zero. When TR starts declining, MR becomes negative.
3. The MR curve lies below the AR curve, sloping downwards from left to right under imperfect competition.
[Figure: A two-panel graph. The top panel shows TR rising, peaking, and falling. The bottom panel shows AR and MR sloping downwards, with MR crossing zero when TR is at its peak.]
Teacher's Note:
a) Clearly align the peak of TR with MR = 0 on the diagram.
b) Describe the behavior of TR when MR is positive, zero, and negative.
(c) Using diagrams, explain the concepts of: [6 Marks]
(i) Shut-down point
(ii) Break-even point of a firm in perfect competition under short run.
Answer:
(i) Shut-down point: It is a point where the price is just equal to the minimum of Average Variable Cost (AVC). At this point, the firm's total revenue covers only its total variable costs, meaning the firm is incurring losses equal to its total fixed costs. If price falls below this point, the firm will shut down its operations in the short run.
(ii) Break-even point: It is a point where Total Revenue equals Total Cost, or Price equals Minimum Average Total Cost (ATC). At this point, the firm earns normal profits (zero economic profit). Any price above this point results in supernormal profits.
[Figure: Two graphs for a perfectly competitive firm. Graph 1 shows the price line tangential to the minimum point of the AVC curve (Shut-down point). Graph 2 shows the price line tangential to the minimum point of the ATC curve (Break-even point).]
Teacher's Note:
a) Differentiate clearly between AVC for shut-down and ATC for break-even points.
b) Ensure diagrams label MC, AVC, and ATC curves correctly alongside the given price lines.
Question 5
(a) Give reasons for the following: [3 Marks]
(i) TC and TVC curves do not start from the same point.
(ii) ATC and AVC curves do not touch each other.
Answer:
(i) TC and TVC curves do not start from the same point because Total Cost includes Total Fixed Cost (TFC) even when output is zero, whereas Total Variable Cost (TVC) is zero at zero output. Thus, the vertical distance between TC and TVC represents TFC.
(ii) ATC and AVC curves do not touch each other because the vertical distance between them represents Average Fixed Cost (AFC), which is always positive (rectangular hyperbola) and never zero at any level of output.
Teacher's Note:
a) Highlight TFC as the wedge between TC and TVC.
b) Highlight AFC as the distance between ATC and AVC.
(b) Explain any two factors affecting the demand of a commodity, other than its price. [3 Marks]
Answer:
1. Income of the consumer: For normal goods, an increase in consumer income leads to an increase in demand (shift to the right). For inferior goods, an increase in income leads to a decrease in demand.
2. Tastes and preferences: Favorable changes in tastes, preferences, and fashions of consumers towards a commodity increase its demand, whereas unfavorable changes decrease its demand.
Teacher's Note:
a) Exclude price of the commodity itself from the explanation.
b) Clearly mention the direction of shift in demand for normal and inferior goods.
(c) Differentiate between perfectly competitive market and monopolistically competitive market on the basis of the following: [6 Marks]
(i) Nature of the product
(ii) Price influence
(iii) Relationship of AR and MR
(iv) Demand curve
Answer:
| Basis | Perfectly Competitive Market | Monopolistically Competitive Market |
|---|---|---|
| (i) Nature of the product | Homogeneous products (perfect substitutes). | Differentiated products (close substitutes). |
| (ii) Price influence | Firm is a price taker; no control over price. | Firm has some control over price (price maker). |
| (iii) Relationship of AR and MR | AR is equal to MR (AR = MR). | AR is greater than MR (AR > MR). |
| (iv) Demand curve | perfettamente elastic (horizontal straight line parallel to X-axis). | More elastic (downward sloping). |
Teacher's Note:
a) Use a tabular format for clear comparison.
b) Ensure all four requested points are systematically addressed.
Question 6
(a) Discuss two methods of Redemption of public debt in an economy. [3 Marks]
Answer:
1. Sinking Fund: The government creates a separate sinking fund out of its current revenue and deposits a regular sum every year. When the debt matures, the accumulated fund is used to pay off the public debt.
2. Refunding: Refunding involves issuing new bonds and securities to repay old maturing bonds, effectively replacing old debt with new debt.
Teacher's Note:
a) Explain methods of debt repayment clearly.
b) Other valid methods include conversion, capital levy, and surplus budget.
(b) How is fiscal deficit different from primary deficit? Explain one implication of fiscal deficit. [3 Marks]
Teacher's Note:
a) Provide exact formulas for both deficits.
b) Mention how primary deficit shows borrowing requirements excluding interest obligations.
(c) Discuss any four causes of adverse Balance of Payments of a country. [6 Marks]
Answer:
1. Increase in imports of petroleum and essential goods due to rising global prices or domestic shortfalls.
2. Rapid increase in domestic consumption leading to higher demand for foreign goods and reduction in exportable surpluses.
3. Inflationary pressures within the domestic economy making domestic goods expensive in the international market, thus reducing exports.
4. Capital flight and heavy outflow of investment funds or unilateral transfers abroad.
Teacher's Note:
a) Provide structural economic reasons for adverse BOP.
b) Explain how each factor causes payments to exceed receipts.
Question 7
(a) Mention the components of M1, M2 and M3 measures of money supply by RBI. [3 Marks]
Answer:
1. M1 = Currency with the public (notes and coins) + Demand deposits with commercial banks + Other deposits with RBI.
2. M2 = M1 + Savings deposits with post office savings banks.
3. M3 = M1 + Net time deposits with commercial banks.
Teacher's Note:
a) Memorize RBI's exact definitions of monetary aggregates.
b) Ensure the components under each aggregate are properly categorized.
(b) Explain the following functions of the Central Bank: [3 Marks]
(i) Custodian of foreign exchange reserves.
(ii) Lender of the last resort.
Answer:
(i) Custodian of foreign exchange reserves: The central bank maintains and manages the country's reserves of international currencies and gold to ensure stability of the exchange rate of the domestic currency.
(ii) Lender of the last resort: When commercial banks face financial crises and fail to secure funds from anywhere else, the central bank advances emergency loans to them to prevent bank failures and maintain financial stability.
Teacher's Note:
a) Clearly explain the stabilization objective for foreign exchange.
b) Emphasize the emergency rescue aspect of the lender of last resort function.
(c) Discuss the different ways in which commercial banks extend loans to their customers. [6 Marks]
Answer:
1. Term Loans: Lump sum amounts advanced to customers for fixed periods against eligible collaterals, repaid in installments.
2. Cash Credit: A credit facility allowed to a borrower up to a specified limit against current assets or securities, where the borrower withdraws funds as needed and pays interest only on the amount utilized.
3. Overdraft Facility: A facility permitted to current account holders allowing them to withdraw money in excess of their account balance up to an agreed limit.
4. Discounting Bills of Exchange: A financial arrangement where the bank purchases a bill of exchange before its maturity date at a discounted value, providing immediate liquidity to the holder.
Teacher's Note:
a) Categorize the ways commercial banks lend clearly.
b) Describe cash credit and overdraft distinctions accurately.
Question 8
(a) Briefly explain the mechanism of the investment multiplier with the help of a schedule. Take initial increase in autonomous investment as ₹ 1000 crores and MPC as 0·8. [3 Marks]
Answer:
1. Given MPC = 0.8, Multiplier (k) = 1 / (1 - MPC) = 1 / (1 - 0.8) = 1 / 0.2 = 5.
2. Total increase in income (ΔY) = k × ΔI = 5 × Rs. 1000 crores = Rs. 5000 crores.
3. Schedule:
Round 1: Increase in Investment (ΔI) = Rs. 1000 crores, Increase in Income (ΔY) = Rs. 1000 crores, Increase in Consumption (ΔC) = Rs. 800 crores, Increase in Savings (ΔS) = Rs. 200 crores.
Round 2: ΔY = Rs. 800 crores, ΔC = Rs. 640 crores, ΔS = Rs. 160 crores.
Total after all rounds: Total ΔI = Rs. 1000 crores, Total ΔY = Rs. 5000 crores, Total ΔC = Rs. 4000 crores, Total ΔS = Rs. 1000 crores.
Teacher's Note:
a) Calculate the multiplier value first using MPC.
b) Show the chain reaction rounds clearly in a summarized manner.
(b) Briefly discuss components of Aggregate Demand in an economy. [3 Marks]
Answer:
1. Private Final Consumption Expenditure (C): Total expenditure incurred by households on goods and services during a year.
2. Investment Expenditure (I): Expenditure incurred by businesses and government on the creation of capital assets (machinery, buildings, inventory).
3. Government Final Consumption Expenditure (G): Expenditure incurred by the government on public goods and services to satisfy collective needs.
4. Net Exports (X - M): The difference between exports and imports of a country.
Teacher's Note:
a) State the equation AD = C + I + G + (X - M).
b) Briefly explain each of the four components.
(c) Explain the concept of deflationary gap with the help of a diagram. Discuss any two monetary measures to reduce the gap. [6 Marks]
Answer:
1. Deflationary Gap: It refers to the shortfall in aggregate demand below the full employment level of output, leading to over-production, unemployment, and falling prices.
2. Monetary measures to reduce the gap: (i) Reduction in Bank Rate: Lowering the bank rate reduces borrowing costs, encouraging commercial banks to lend more, which raises aggregate demand. (ii) Purchase of securities in Open Market Operations: Buying government securities injects liquidity into the economy, increasing money supply and boosting aggregate demand.
[Figure: An aggregate demand and aggregate supply macroeconomic diagram showing the full employment equilibrium line and an actual AD line falling short, creating a vertical deflationary gap distance.]
Teacher's Note:
a) Define deflationary gap clearly as a deficiency of aggregate demand.
b) Explain expansionary monetary tools to resolve the gap.
Question 9
(a) How can you obtain: [3 Marks]
(i) National income from GDPMP.
(ii) Personal disposable income from personal income.
Answer:
(i) National Income (NNPFC) = GDPMP - Depreciation (Consumption of Fixed Capital) - Net Indirect Taxes + Net Factor Income from Abroad (NFIA).
(ii) Personal Disposable Income (PDI) = Personal Income - Direct Personal Taxes (income tax) - Miscellaneous receipts of government (fees/fines paid by households).
Teacher's Note:
a) Use correct macroeconomic abbreviations (NNPFC for national income).
b) Ensure all subtractions and additions are accurately sequenced.
(b) With the help of relevant examples, explain the meaning of leakages and injections in the circular flow of income. [3 Marks]
Answer:
1. Leakages: These are outflows of money from the circular flow of income that reduce the total stream of income and expenditure. Examples include savings, taxes, and imports.
2. Injections: These are inflows of money into the circular flow of income that boost the total economic activity. Examples include investments, government expenditure, and exports.
Teacher's Note:
a) Provide clear economic definitions for both.
b) Give relevant examples like savings for leakages and investment for injections.
(c) From the following data, calculate GNPFC, NDPFC and national income: [6 Marks]
| Item | Rs. in crores |
|---|---|
| (i) Private final consumption expenditure | 950 |
| (ii) Gross domestic fixed capital formation | 370 |
| (iii) Consumption of fixed capital | 20 |
| (iv) Government final consumption expenditure | 410 |
| (v) Closing stock | 300 |
| (vi) Subsidy | 80 |
| (vii) Net exports | (-)50 |
| (viii) Wages and salaries | 780 |
| (ix) Net factor income from abroad | (-)40 |
| (x) Indirect tax | 180 |
| (xi) Opening stock | 150 |
| (xii) Profit before tax | 200 |
Answer:
1. First, calculate Gross Domestic Product at Market Price (GDPMP) using the Expenditure Method:
GDPMP = Private final consumption expenditure (i) + [Gross domestic fixed capital formation (ii) + Change in stock (Closing stock (v) - Opening stock (xi))] + Government final consumption expenditure (iv) + Net exports (vii)
Change in stock = 300 - 150 = 150
Gross Domestic Capital Formation = 370 + 150 = 520
GDPMP = 950 + 520 + 410 + (-50) = Rs. 1,830 crores.
2. Calculate GNPFC:
GNPFC = GDPMP - Indirect tax (x) + Subsidy (vi) + Net factor income from abroad (ix)
GNPFC = 1,830 - 180 + 80 + (-40) = Rs. 1,690 crores.
3. Calculate NDPFC:
NDPFC = GDPMP - Consumption of fixed capital (iii) - Indirect tax (x) + Subsidy (vi)
NDPFC = 1,830 - 20 - 180 + 80 = Rs. 1,710 crores.
4. Calculate National Income (NNPFC):
National Income = NDPFC + Net factor income from abroad (ix)
National Income = 1,710 + (-40) = Rs. 1,670 crores.
Teacher's Note:
a) Compute GDPMP correctly first using the expenditure components, keeping change in stock = Closing minus Opening stock.
b) Verify final aggregates carefully using direct adjustments from domestic to national products.
Free study material for Economics
Practice Exam Question Papers for Class 12 Economics ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions
Understanding Exam Patterns with ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions
Access structured past examination sets for Class 12 Economics. Solving the ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions provided above helps students understand actual exam difficulty levels, question formats, and topic distributions for both descriptive and objective sections.
Why Practice Class 12 Economics Question Papers?
Practicing past question sets under timed home conditions helps refine pacing and time management skills, ensuring you complete your Economics examination comfortably within the official duration.
Additional Study Resources for Class 12 Economics
Pair your past paper revision with our official Class 12 Economics sample papers and online practice modules to achieve total curriculum mastery.
FAQs
The ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions is available for download on StudiesToday.com. It includes complete set with all sections so that Class 12 students can practice with the exact same paper that came in the ISC exams.
Yes, the solutions for ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions are prepared by subject matter experts as per official marking scheme. Class 12 students will understand the structure of answers and 'step-marks' methodology Economics.
Solving previous year papers like ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions is important to understand repeat themes and question difficulty levels of Economics. It helps Class 12 students to test their time management skills too.
Yes, where applicable, ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions is available in both English and Hindi mediums. All students from Class 12 can access Economics study material in their preferred language.
No, all previous year question papers on StudiesToday, including ISC Class 12 Economics Board Exam Question Paper 2020 with Solutions, are provided free of charge in mobile-friendly PDF.