Previous Year Question Papers for Class 12 Chemistry
Review targeted exam resources with the ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions. Built according to official ISC standards for the 2026-27 academic year, these downloadable Class 12 Chemistry question papers support effective revision and performance tracking.
Practice Class 12 Chemistry Exam Papers
View or download the dedicated ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions resource below. Engaging with these previous year papers under timed conditions ensures continuous academic progress and mastery of the 2026-27 exam format.
ISC Class 12 Chemistry Board Exam Question Paper with Solutions
Question 1:
(a) Fill in the blanks by choosing the appropriate word/words from those given in the brackets: [4 × 1]
(iodoform, volume, mass, haloform, gram equivalent, chloroform, carbylamine, \( \text{sp}^3\text{d}^2 \), high, coke, \( \text{d}^2\text{sp}^3 \), low, gram mole, carbon monoxide)
(i) Equivalent conductivity is the conducting power of all the ions furnished by one _________ of an electrolyte present in a definite _________ of the solution. [1 Mark]
Answer:
gram equivalent, volume
Teacher's Note:
a) Equivalent conductivity is defined for one gram equivalent of an electrolyte dissolved in a specific volume of solution.
b) Students often confuse equivalent conductivity with molar conductivity, which involves one gram mole instead of one gram equivalent.
(ii) Bleaching powder, on treatment with ethanol or acetone gives _________. [1 Mark]
Answer:
iodoform
Teacher's Note:
a) This is a standard haloform reaction where ethanol or acetone reacts with bleaching powder (source of chlorine and alkali) to form iodoform.
b) Remember that compounds containing the \( \text{CH}_3\text{CO}- \) group or \( \text{CH}_3\text{CH(OH)}- \) group give the iodoform test.
(iii) Outer orbital complexes involve _________ hybridization and are _________ spin complexes. [1 Mark]
Answer:
\( \text{sp}^3\text{d}^2 \), high
Teacher's Note:
a) Outer orbital complexes use outermost d-orbitals for hybridization (\( \text{sp}^3\text{d}^2 \)) and form high spin (or spin-free) complexes.
b) Inner orbital complexes use inner d-orbitals (\( \text{d}^2\text{sp}^3 \)) and are low spin complexes.
(iv) Zinc. Oxide is reduced by _________ at 1673K to form zinc and _________. [1 Mark]
Answer:
coke, carbon monoxide
Teacher's Note:
a) Zinc oxide is reduced commercially by carbon (coke) at high temperature (1673 K) in a smelting process.
b) The reaction yields zinc metal (which distills over) and carbon monoxide gas.
(b) Select the correct alternative from the choices given: [4 × 1]
(i) The packing efficiency of simple cubic structure, body centered cubic structure and face centered cubic structure respectively is:
(1) \( 52.4\%, 74\%, 68\% \)
(2) \( 74\%, 68\%, 52.4\% \)
(3) \( 52.4\%, 68\%, 74\% \)
(4) \( 68\%, 74\%, 52.4\% \)
Answer: (3) \( 52.4\%, 68\%, 74\% \)
Simple cubic = \( 52.4\% \), BCC = \( 68\% \), FCC = \( 74\% \).
Teacher's Note:
a) Packing efficiency refers to the percentage of total space filled by the particles.
b) Memorize these standard values as they are frequently asked in various forms.
(ii) When acetone is treated with Grignard's reagent, followed by hydrolysis, the product formed is:
(1) Secondary alcohol
(2) Tertiary alcohol
(3) Primary alcohol
(4) Aldehyde
Answer: (2) Tertiary alcohol
Reaction of ketone (acetone) with Grignard reagent yields a tertiary alcohol upon hydrolysis.
Teacher's Note:
a) Formaldehyde gives primary alcohols, other aldehydes give secondary alcohols, and ketones give tertiary alcohols with Grignard reagents.
b) Ensure you write balanced reactions showing the adduct formation followed by acid hydrolysis.
(iii) Which of the following electrolytes is least effective in causing flocculation of positively charged ferric hydroxidesol?
(1) \( \text{K}_3[\text{Fe(CN)}_6] \)
(2) \( \text{K}_2\text{CrO}_4 \)
(3) \( \text{K}_4[\text{Fe(CN)}_6] \)
(4) \( \text{KBr} \)
Answer: (4) KBr
According to Hardy-Schulze rule, the coagulating power depends on the valency of the flocculating ion; bromide has the lowest valency (\( -1 \)).
Teacher's Note:
a) Ferric hydroxide sol is positively charged, so negatively charged ions (anions) are responsible for coagulation.
b) Higher valency of the oppositely charged ion means greater coagulating power (lower effectiveness for monovalent ions like \( \text{Br}^- \)).
(iv) On heating an aliphatic primary amine with chloroform and alcoholic potassium hydroxide, the organic compound formed is an:
(1) Alkyl isocyanide
(2) Alkanol
(3) Alkanal
(4) Alkyl cyanide
Answer: (1) Alkyl isocyanide
This is the carbylamine test yielding foul-smelling alkyl isocyanide (carbylamine).
Teacher's Note:
a) This reaction is a specific test for primary amines (both aliphatic and aromatic).
b) Secondary and tertiary amines do not give this test.
(c) Match the following: [4 × 1]
(i) Silicon and phosphorous (a) Acetaldehyde
(ii) Iodoform test (b) Xenon hexafluoride
(iii) Arrhenius equation (c) n-type of semiconductors
(iv) Distorted octahedral structure (d) Frequency factor
Answer:
(i) - (c)
(ii) - (a)
(iii) - (d)
(iv) - (b)
Teacher's Note:
a) Doping silicon with phosphorus introduces excess electrons, creating n-type semiconductors.
b) Xenon hexafluoride (\( \text{XeF}_6 \)) possesses a distorted octahedral geometry due to the presence of a lone pair on xenon.
(d) Answer the following questions: [4 × 2]
(i) What is the common name of the polymer obtained by the polymerization of caprolactam? Is it addition polymer or condensation polymer?
Answer:
1. The common name of the polymer is Nylon-6.
2. It is a condensation polymer (specifically formed by step-growth polymerization involving ring-opening).
Teacher's Note:
a) Caprolactam monomer has 6 carbon atoms, hence the resulting polymer is Nylon-6.
b) Although it forms via ring-opening of a cyclic amide, it is classified as a condensation polymer because water molecules are eliminated during the initial formation of aminocaproic acid units.
(ii) Why \( \text{Zn}^{2+} \) ions are colourless while \( \text{Ni}^{2+} \) ions are green and \( \text{Cu}^{2+} \) ions are blue in colour? [2 Marks]
Answer:
1. \( \text{Zn}^{2+} \) has a completely filled d-subshell (\( 3\text{d}^{10} \)), hence d-d transition is not possible, making it colourless.
2. Both \( \text{Ni}^{2+} \) (\( 3\text{d}^8 \)) and \( \text{Cu}^{2+} \) (\( 3\text{d}^9 \)) have partially filled d-orbitals.
3. They undergo d-d transitions by absorbing light from the visible region, transmitting complementary colours (green for nickel, blue for copper).
Teacher's Note:
a) Colour in transition metal ions arises primarily from d-d electron transitions.
b) Ions with \( \text{d}^0 \) or \( \text{d}^{10} \) configurations lack unpaired electrons available for such transitions and are therefore colourless.
(iii) The molar conductivity of \( \text{NaCl} \), \( \text{CH}_3\text{COONa} \) and \( \text{HCl} \) at infinite dilution is \( 126.45 \), \( 91.0 \) and \( 426.16 \text{ ohm}^{-1}\text{ cm}^2\text{ mol}^{-1} \) respectively. Calculate the molar conductivity (\( \Lambda^\circ_{\text{m}} \)) for \( \text{CH}_3\text{COOH} \) at infinite dilution. [2 Marks]
Answer:
1. According to Kohlrausch's law: \( \Lambda^\circ_{\text{m}}(\text{CH}_3\text{COOH}) = \Lambda^\circ_{\text{m}}(\text{CH}_3\text{COONa}) + \Lambda^\circ_{\text{m}}(\text{HCl}) - \Lambda^\circ_{\text{m}}(\text{NaCl}) \)
2. Substitute the given values: \( \Lambda^\circ_{\text{m}}(\text{CH}_3\text{COOH}) = 91.0 + 426.16 - 126.45 \)
3. Calculate the final value: \( 517.16 - 126.45 = 390.71 \text{ ohm}^{-1}\text{ cm}^2\text{ mol}^{-1} \)
Teacher's Note:
a) Apply Kohlrausch's law of independent migration of ions correctly.
b) Watch out for proper units at the end of the calculation.
(iv) Identify the compounds A, B, C and D. [2 Marks]
[Figure: reaction sequence chart not explicitly rendered in text, based on standard organic conversion sequence for question context]
Answer:
1. The identification depends on the specific reaction sequence provided in the question booklet.
2. Ensure sequential verification of functional group transformations (e.g., alcohol to alkene, haloalkane to nitrile, etc.).
Teacher's Note:
a) Always trace reaction pathways step-by-step.
b) Write clear structural formulas for each identified species.
Question 2: [2 Marks]
(a) An element has atomic weight \( 93 \text{ g mol}^{-1} \) and density \( 11.5 \text{ g cm}^{-3} \). If the edge length of its unit cell is \( 300 \text{ pm} \), identify the type of unit cell. (\( \text{N}_\text{A} = 6.023 \times 10^{23} \text{ mol}^{-1} \))
Answer:
1. Formula: \( d = \frac{Z \times M}{a^3 \times \text{N}_\text{A}} \)
2. Rearrange to find Z: \( Z = \frac{d \times a^3 \times \text{N}_\text{A}}{M} \)
3. Convert edge length to cm: \( a = 300 \text{ pm} = 300 \times 10^{-10} \text{ cm} = 3 \times 10^{-8} \text{ cm} \)
4. Substitute values: \( Z = \frac{11.5 \times (3 \times 10^{-8})^3 \times 6.023 \times 10^{23}}{93} \)
5. \( Z = \frac{11.5 \times 27 \times 10^{-24} \times 6.023 \times 10^{23}}{93} = \frac{187.07}{93} \approx 2 \)
6. Since \( Z = 2 \), the unit cell is Body Centered Cubic (BCC).
Teacher's Note:
a) Pay close attention to unit conversions between picometers and centimeters.
b) The calculated value of Z determines whether it is simple cubic (\( Z=1 \)), BCC (\( Z=2 \)), or FCC (\( Z=4 \)).
OR
(b) Calculate the radius of copper atom. The atomic weight of copper is \( 63.55 \text{ g mol}^{-1} \). It crystallises in face centered cubic lattice and has density of \( 8.93 \text{ g cm}^{-3} \) at 298. (\( \text{N}_\text{A} = 6.023 \times 10^{23} \text{ mol}^{-1} \)) [2 Marks]
Answer:
1. For FCC lattice, \( Z = 4 \).
2. Using density formula: \( a^3 = \frac{Z \times M}{d \times \text{N}_\text{A}} = \frac{4 \times 63.55}{8.93 \times 6.023 \times 10^{23}} \)
3. \( a^3 = \frac{254.2}{53.785 \times 10^{23}} = 4.726 \times 10^{-23} \text{ cm}^3 = 47.26 \times 10^{-24} \text{ cm}^3 \)
4. Edge length \( a = \sqrt[3]{47.26 \times 10^{-24}} = 3.615 \times 10^{-8} \text{ cm} = 361.5 \text{ pm} \)
5. For FCC, relation between radius (r) and edge length (a) is: \( r = \frac{a}{2\sqrt{2}} = \frac{361.5}{2 \times 1.414} = 127.8 \text{ pm} \)
Teacher's Note:
a) Remember the specific relation between radius and edge length for FCC: \( 4r = \sqrt{2}a \).
b) Cube root calculations require careful logarithmic or approximation steps.
Question 3: [2 Marks]
Complete and balance the following chemical equations:
(i) \( \text{P}_4 + \text{NaOH} + \text{H}_2\text{O} \xrightarrow{\text{heat}} \dots + \dots \)
(ii) \( \text{Cu} + \text{HNO}_3 \text{ (dilute)} \rightarrow \dots + \dots + \dots \)
Answer:
(i) \( \text{P}_4 + 3\text{NaOH} + 3\text{H}_2\text{O} \xrightarrow{\text{heat}} \text{PH}_3 + 3\text{NaH}_2\text{PO}_2 \)
(ii) \( 3\text{Cu} + 8\text{HNO}_3 \text{ (dilute)} \rightarrow 3\text{Cu(NO}_3)_2 + 4\text{H}_2\text{O} + 2\text{NO} \)
Teacher's Note:
a) Equation (i) represents the laboratory preparation of phosphine gas via disproportionation of white phosphorus.
b) Equation (ii) highlights the reaction of dilute nitric acid with copper, producing nitric oxide (NO) rather than nitrogen dioxide.
Question 4: [2 Marks]
(i) Write the chemical equation for the reaction of glucose with bromine water.
(ii) Write the zwitter ion structure of glucine.
Answer:
(i) \( \text{CHO(CHOH)}_4\text{CH}_2\text{OH} + \text{Br}_2\text{H}_2\text{O} \rightarrow \text{COOH(CHOH)}_4\text{CH}_2\text{OH} + 2HBr \) (Glucose to Gluconic acid)
(ii) Zwitter ion of glycine: \( ^+\text{H}_3\text{N-CH}_2\text{-COO}^- \)
Teacher's Note:
a) Bromine water is a mild oxidising agent that oxidises only the aldehyde group of glucose to a carboxylic acid group.
b) A zwitter ion is a dipolar ion formed by internal proton transfer from the carboxylic acid group to the amino group.
Question 5: [2 Marks]
(i) How do antiseptics differ from disinfectants?
(ii) Name a substance that can be used as an antiseptic as well as a disinfectant.
Answer:
1. Antiseptics are applied safely to living tissues (wounds, cuts), whereas disinfectants are applied to inanimate objects (floors, instruments).
2. Phenol (in different concentrations) can act as both; \( 0.2\% \) solution is used as an antiseptic while \( 1\% \) solution acts as a disinfectant.
Teacher's Note:
a) The key difference lies in toxicity and application site (living tissue vs non-living surfaces).
b) Mention concentration differences when citing dual-purpose chemicals like phenol.
Question 6: [2 Marks]
An alloy of gold (Au) and cadmium (Cd) crystallises with a cubic structure in which gold atoms occupy the corners and cadmium atoms fit into the face centres. What is the formula of this alloy?
Answer:
1. Number of gold (Au) atoms per unit cell (at corners) = \( 8 \times \frac{1}{8} = 1 \).
2. Number of cadmium (Cd) atoms per unit cell (at face centres) = \( 6 \times \frac{1}{2} = 3 \).
3. Ratio of Au : Cd = \( 1 : 3 \).
4. Therefore, the formula of the alloy is \( \text{AuCd}_3 \).
Teacher's Note:
a) Multiply the number of atoms at each site by their respective contribution fractions.
b) Simplify the resulting atomic ratio to get the empirical formula.
Question 7: [2 Marks]
(a) State reasons for the following:
(i) Ethylamine is soluble in water whereas aniline is insoluble in water.
(ii) Aliphatic amines are stronger bases than aromatic amines.
Answer:
1. Ethylamine forms intermolecular hydrogen bonds with water molecules due to its smaller hydrophobic alkyl group, whereas aniline possesses a large bulky hydrophobic benzene ring that hinders hydrogen bonding.
2. In aliphatic amines, the alkyl group exerts a positive inductive effect (+I effect), increasing electron density on nitrogen, whereas in aromatic amines, the lone pair on nitrogen is delocalized into the benzene ring via resonance, making it less available for protonation.
Teacher's Note:
a) Solubility depends on the balance between hydrophobic hydrocarbon parts and hydrophilic hydrogen-bonding groups.
b) Basicity relies on electron availability on the nitrogen atom.
OR
(b) Complete and balance the following equations: [2 Marks]
(i) \( \text{C}_6\text{H}_5\text{NH}_2 + \text{CH}_3\text{COCl} \rightarrow \dots + \dots \)
(ii) \( \text{C}_2\text{H}_5\text{NH}_2 + \text{HNO}_2 \rightarrow \dots + \dots + \dots \)
Answer:
(i) \( \text{C}_6\text{H}_5\text{NH}_2 + \text{CH}_3\text{COCl} \rightarrow \text{C}_6\text{H}_5\text{NHCOCH}_3 + \text{HCl} \)
(ii) \( \text{C}_2\text{H}_5\text{NH}_2 + \text{HNO}_2 \rightarrow \text{C}_2\text{H}_5\text{OH} + \text{N}_2 + \text{H}_2\text{O} \)
Teacher's Note:
a) Reaction (i) is acetylation of aniline forming acetanilide.
b) Reaction (ii) shows the reaction of primary aliphatic amine with nitrous acid to yield alcohol and nitrogen gas.
Question 8: [2 Marks]
(a) Draw the structure of xenon tetrafluoride molecule. State the hybridisation of the central atom and geometry of the molecule.
Answer:
1. Structure: Square planar geometry with two lone pairs of electrons occupying axial positions.
2. Hybridisation: \( \text{sp}^3\text{d}^2 \).
3. Geometry: Square planar (molecular shape) / Octahedral (electron-pair geometry).
Teacher's Note:
a) Xenon tetrafluoride (\text{XeF}_4) has 4 bond pairs and 2 lone pairs.
b) According to VSEPR theory, lone pairs occupy trans positions to minimize repulsion, resulting in a square planar shape.
Question 9: [2 Marks]
(a) Calculate the emf and \( \Delta G \) for the given cell at \( 25^\circ\text{C} \):
\( \text{Cr}_{(s)} / \text{Cr}^{3+}(0.1\text{M}) // \text{Fe}^{2+}(0.01\text{M}) / \text{Fe}_{(s)} \)
Given: \( \text{E}^\circ_{\text{Cr}^{3+}/\text{Cr}} = -0.74\text{V} \), \( \text{E}^\circ_{\text{Fe}^{2+}/\text{Fe}} = -0.44\text{V} \)
(\( 1\text{F} = 96500\text{C}, \text{R} = 8.314\text{ JK}^{-1}\text{mol}^{-1} \))
Answer:
1. Cell reaction: \( 2\text{Cr} + 3\text{Fe}^{2+} \rightarrow 2\text{Cr}^{3+} + 3\text{Fe} \) (\( n = 6 \)).
2. \( \text{E}^\circ_{\text{cell}} = \text{E}^\circ_{\text{cathode}} - \text{E}^\circ_{\text{anode}} = -0.44 - (-0.74) = +0.30\text{V} \).
3. Nernst equation: \( \text{E}_{\text{cell}} = \text{E}^\circ_{\text{cell}} - \frac{0.0591}{n} \log \frac{[\text{Cr}^{3+}]^2}{[\text{Fe}^{2+}]^3} \)
4. \( \text{E}_{\text{cell}} = 0.30 - \frac{0.0591}{6} \log \frac{(0.1)^2}{(0.01)^3} = 0.30 - \frac{0.0591}{6} \log \frac{10^{-2}}{10^{-6}} \)
5. \( \text{E}_{\text{cell}} = 0.30 - \frac{0.0591}{6} \log(10^4) = 0.30 - \frac{0.0591 \times 4}{6} = 0.30 - 0.0394 = 0.2606\text{V} \).
6. \( \Delta G = -nFE_{\text{cell}} = -6 \times 96500 \times 0.2606 = -1,50,887.4 \text{ J mol}^{-1} = -150.89 \text{ kJ mol}^{-1} \).
Teacher's Note:
a) Determine the number of electrons exchanged (\( n = 6 \)) correctly based on the balanced equation coefficients.
b) Pay close attention to the concentration ratio terms inside the logarithm.
OR
(b) Calculate the degree of dissociation (\( \alpha \)) of acetic acid, if it molar conductivity (\( \Lambda_\text{m} \)) is \( 39.05 \text{ S cm}^2 \text{ mol}^{-1} \)
(Given: \( \Lambda^\circ_{(\text{H}^+)} = 349.6 \text{ S cm}^2 \text{ mol}^{-1} \) and \( \Lambda^\circ_{(\text{CH}_3\text{COO}^-)} = 40.95 \text{ S cm}^2 \text{ mol}^{-1} \)) [2 Marks]
Answer:
1. Calculate molar conductivity at infinite dilution for acetic acid: \( \Lambda^\circ_{\text{m}}(\text{CH}_3\text{COOH}) = \Lambda^\circ(\text{H}^+) + \Lambda^\circ(\text{CH}_3\text{COO}^-) = 349.6 + 40.95 = 390.55 \text{ S cm}^2 \text{ mol}^{-1} \).
2. Degree of dissociation \( \alpha = \frac{\Lambda_\text{m}}{\Lambda^\circ_\text{m}} = \frac{39.05}{390.55} = 0.1 \).
3. Percentage dissociation = \( 10\% \).
Teacher's Note:
a) Degree of dissociation is the ratio of molar conductivity at a given concentration to that at infinite dilution.
b) Check decimal additions carefully when finding \( \Lambda^\circ_\text{m} \).
Question 10: [3 Marks]
Name an important ore of silver. How is silver extracted from its sulphide ore? Give balanced chemical equations involved in the extraction of pure silver.
Answer:
1. Important ore of silver: Argentite or Silver glance (\( \text{Ag}_2\text{S} \)).
2. Extraction process: Cyanide process (Mac-Arthur Forest Cyanide process).
3. Leaching with sodium cyanide: \( \text{Ag}_2\text{S} + 4\text{NaCN} \rightleftharpoons 2\text{Na}[\text{Ag(CN)}_2] + \text{Na}_2\text{S} \)
4. Precipitation of silver using zinc: \( 2\text{Na}[\text{Ag(CN)}_2] + \text{Zn} \rightarrow \text{Na}_2[\text{Zn(CN)}_4] + 2\text{Ag}\downarrow \)
Teacher's Note:
a) Argentite is the primary commercial ore for silver extraction.
b) The leaching reaction is reversible, so air is blown through the solution to oxidize sodium sulphide and drive the reaction forward.
Question 11: [3 Marks]
How will you convert the following:
(i) Chlorobenzene to biphenyl
(ii) Propene to 1-bromopropane
(iii) Chlorobenzene to aniline
Answer:
1. Chlorobenzene to biphenyl: Treat chlorobenzene with sodium metal in dry ether (Fittig reaction).
\( 2\text{C}_6\text{H}_5\text{Cl} + 2\text{Na} \xrightarrow{\text{dry ether}} \text{C}_6\text{H}_5-\text{C}_6\text{H}_5 + 2\text{NaCl} \)
2. Propene to 1-bromopropane: Treat propene with hydrogen bromide in the presence of benzoyl peroxide (peroxide effect / anti-Markovnikov addition).
\( \text{CH}_3-\text{CH}=\text{CH}_2 + \text{HBr} \xrightarrow{\text{peroxide}} \text{CH}_3\text{CH}_2\text{CH}_2\text{Br} \)
3. Chlorobenzene to aniline: Heat chlorobenzene with aqueous ammonia in the presence of cuprous oxide catalyst at high pressure and temperature.
\( \text{C}_6\text{H}_5\text{Cl} + 2\text{NH}_3 \xrightarrow{\text{Cu}_2\text{O}, \Delta, \text{pressure}} \text{C}_6\text{H}_5\text{NH}_2 + \text{NH}_4\text{Cl} \)
Teacher's Note:
a) Name reactions like Fittig reaction are very important for conversions involving aryl halides.
b) Peroxide effect applies specifically to HBr addition over alkenes.
Question 12: [3 Marks]
Explain what is observed when:
(i) A beam of light is passed through a colloidal solution.
(ii) An electric current is passed through a colloidal solution.
(iii) An electrolyte (\text{AlCl}_3) is added to a colloidal solution of arsenious sulphide (\text{As}_2\text{S}_3).
Answer:
1. When light passes through a colloidal solution, the path of the beam becomes illuminated (Tyndall effect) due to scattering of light by colloidal particles.
2. When electric current passes through a colloidal solution, colloidal particles migrate towards oppositely charged electrodes (electrophoresis) and get discharged or coagulated.
3. Addition of \( \text{AlCl}_3 \) causes coagulation or precipitation of negatively charged arsenious sulphide sol because aluminium ions (\text{Al}^{3+}) have high coagulating power according to the Hardy-Schulze rule.
Teacher's Note:
a) The Tyndall effect confirms the heterogeneous nature of colloids.
b) Electrophoresis proves the presence of electrical charges on colloidal particles.
Question 13: [3 Marks]
(a) How will you convert the following: (Give balanced equation)
(i) Benzoyl chloride to benzaldehyde.
(ii) Methyl chloride to acetic acid.
(iii) Acetic acid to methane.
Answer:
1. Benzoyl chloride to benzaldehyde: Reduction using hydrogen over palladium on barium sulphate catalyst (Rosenmund reduction).
\( \text{C}_6\text{H}_5\text{COCl} + \text{H}_2 \xrightarrow{\text{Pd/BaSO}_4} \text{C}_6\text{H}_5\text{CHO} + \text{HCl} \)
2. Methyl chloride to acetic acid: Treat methyl chloride with alcoholic KCN to form acetonitrile, followed by acid hydrolysis.
\( \text{CH}_3\text{Cl} + \text{KCN} \rightarrow \text{CH}_3\text{CN} + \text{KCl} \)
\( \text{CH}_3\text{CN} + 2\text{H}_2\text{O} + \text{HCl} \rightarrow \text{CH}_3\text{COOH} + \text{NH}_4\text{Cl} \)
3. Acetic acid to methane: Heat sodium acetate with soda lime (decarboxylation).
\( \text{CH}_3\text{COONa} + \text{NaOH} \xrightarrow{\text{CaO}, \Delta} \text{CH}_4 + \text{Na}_2\text{CO}_3 \)
Teacher's Note:
a) Rosenmund reduction is a standard method for preparing aldehydes from acyl chlorides.
b) Decarboxylation of sodium salts of carboxylic acids with soda-lime reduces the carbon chain length by one carbon.
OR
(b) A ketone A (\text{C}_4\text{H}_8\text{O}) which undergoes Iodoform reaction gives compound B on reduction. B on heating with conc. \text{H}_2\text{SO}_4 at 443K gives a compound C which forms ozonic D. D on hydrolysis with Zn dust gives only E. Identify the compounds A to E. Write the Iodoform reaction with compound A. [3 Marks]
Answer:
1. A = Butan-2-one (\text{CH}_3\text{COCH}_2\text{CH}_3)
2. B = Butan-2-ol (\text{CH}_3\text{CH(OH)CH}_2\text{CH}_3)
3. C = But-2-ene (\text{CH}_3\text{CH}=\text{CHCH}_3)
4. D = Butene ozonide
5. E = Acetaldehyde (\text{CH}_3\text{CHO})
6. Iodoform reaction: \( \text{CH}_3\text{COCH}_2\text{CH}_3 + 4\text{I}_2 + 4\text{NaOH} \rightarrow \text{CHI}_3\downarrow + \text{CH}_3\text{CH}_2\text{COONa} + 4\text{NaI} + 4\text{H}_2\text{O} \)
Teacher's Note:
a) Ketones undergoing iodoform test must contain a methyl ketone group (\text{CH}_3\text{CO}-).
b) Ozonolysis of symmetrical alkenes like but-2-ene yields two molecules of acetaldehyde.
Question 14: [3 Marks]
A first order reaction is \( 50\% \) completed in 30 minutes at 300K and in 10 minutes at 320K. Calculate the activation energy of the reaction. (\text{R} = 8.314 \text{ JK}^{-1}\text{mol}^{-1})
Answer:
1. Rate constant at 300K (\( k_1 \)): \( k_1 = \frac{0.693}{t_{1/2}} = \frac{0.693}{30} = 0.0231 \text{ min}^{-1} \).
2. Rate constant at 320K (\( k_2 \)): \( k_2 = \frac{0.693}{10} = 0.0693 \text{ min}^{-1} \).
3. Arrhenius equation: \( \log\left(\frac{k_2}{k_1}\right) = \frac{E_a}{2.303 R} \left(\frac{T_2 - T_1}{T_1 T_2}\right) \).
4. Substitute values: \( \log\left(\frac{0.0693}{0.0231}\right) = \log(3) = 0.4771 \).
5. \( 0.4771 = \frac{E_a}{2.303 \times 8.314} \left(\frac{320 - 300}{300 \times 320}\right) = \frac{E_a}{19.147} \left(\frac{20}{96000}\right) \).
6. \( E_a = \frac{0.4771 \times 19.147 \times 96000}{20} = 43,847 \text{ J mol}^{-1} = 43.85 \text{ kJ mol}^{-1} \).
Teacher's Note:
a) First-order half-life is independent of initial concentration and related directly to the rate constant by \( t_{1/2} = 0.693 / k \).
b) Ensure consistent units for temperature and gas constant during logarithmic calculations.
Question 15: [3 Marks]
Explain the following:
(i) Transition metals and their compounds generally exhibit a paramagnetic behaviour.
(ii) There is an increase in density of elements from titanium (\text{Z}=22) to copper (\text{Z}=29) in the 3d series of transition elements.
(iii) \text{K}_2\text{Cr}_2\text{O}_7 acts as a powerful oxidising agent in acidic medium.
Answer:
1. Transition metals contain unpaired d-electrons which possess spin and orbital magnetic moments, resulting in paramagnetism.
2. Across the period from Ti to Cu, atomic mass increases significantly while atomic volume decreases due to inefficient screening by d-electrons, causing a continuous increase in density.
3. In acidic medium, dichromate ion reduces to chromium(III) ions, accepting electrons readily: \( \text{Cr}_2\text{O}_7^{2-} + 14\text{H}^+ + 6\text{e}^- \rightarrow 2\text{Cr}^{3+} + 7\text{H}_2\text{O} \), making it a strong oxidant.
Teacher's Note:
a) Paramagnetism is directly proportional to the number of unpaired electrons.
b) Dichromate oxidises ferrous salts to ferric, iodides to iodine, and sulphites to sulphates.
Question 16: [3 Marks]
(a) (i) The elevation in boiling point when \( 0.30 \text{ g} \) of acetic acid is dissolved in \( 100 \text{ g} \) of benzene is \( 0.0633^\circ\text{C} \). Calculate the molecular weight of acetic acid from this data. What conclusion can you draw about the molecular state of the solute in the solution?
(Given \text{K}_\text{b} for benzene = \( 2.53\text{K kg mol}^{-1} \), at. Wt. of \text{C}=12, \text{H}=1, \text{O}=16)
(ii) Determine the osmotic pressure of a solution prepared by dissolving \( 0.025 \text{ g} \) of \text{K}_2\text{SO}_4 in 2 litres of water at \( 25^\circ\text{C} \), assuming that \text{K}_2\text{SO}_4 is completely dissociated.
(\text{R}=0.0821 \text{ Lit-atm K}^{-1}\text{mol}^{-1}, \text{mol. wt. of } \text{K}_2\text{SO}_4 = 174 \text{ g mol}^{-1}$)
Answer:
1. Part (i): \( \Delta T_\text{b} = \frac{\text{K}_\text{b} \times W_2 \times 1000}{M_2 \times W_1} \)
\( 0.0633 = \frac{2.53 \times 0.30 \times 1000}{M_2 \times 100} \)
\( M_2 = \frac{2.53 \times 3}{\text{0.0633}} = 119.9 \text{ g mol}^{-1} \).
Normal molecular weight of acetic acid (\text{CH}_3\text{COOH}) = \( 60 \text{ g mol}^{-1} \). Since observed molecular weight is double, acetic acid undergoes association (dimerization) in benzene.
2. Part (ii): \text{K}_2\text{SO}_4 dissociates as \( 2\text{K}^+ + \text{SO}_4^{2-} \) (\text{i} = 3).
Moles of \text{K}_2\text{SO}_4 = \( \frac{0.025}{174} \).
\( \pi = iCRT = i \left(\frac{n}{V}\right) RT = 3 \times \frac{0.025}{174 \times 2} \times 0.0821 \times 298 = 0.00526 \text{ atm} \).
Teacher's Note:
a) Association of solute molecules results in a lower number of particles, thereby increasing the apparent molecular mass.
b) Remember to include the van't Hoff factor (\text{i}) when calculating colligative properties for dissociating salts.
OR
(b) (i) An aqueous solution of a non-volatile solute freezes at 272.4 K, while pure water freezes at 273.0 K. Determine the following:
(1) The molality of solution
(2) Boiling point of solution
(3) The lowering of vapour pressure of water at 298 K
(Given \text{K}_\text{f} = \( 1.86 \text{ K kg mol}^{-1} \), \text{K}_\text{b} = \( 0.512 \text{ K kg mol}^{-1} \) and vapour pressure of water at 298 K = \( 23.756 \text{ mm of Hg} \))
(ii) A solution containing \( 1.23\text{g} \) of calcium nitrate in \( 10\text{g} \) of water, boils at \( 100.975^\circ\text{C} \) at \( 760 \text{ mm of Hg} \). Calculate the van't Hoff factor for the salt at this concentration.
(\text{K}_\text{b} for water = \( 0.52 \text{ K kg mol}^{-1} \), mol. wt. of calcium nitrate = \( 164\text{g mol}^{-1} \)) [3 Marks]
Answer:
1. Part (i)(1) \( \Delta T_\text{f} = 273.0 - 272.4 = 0.6^\circ\text{C} \). Molality \( m = \frac{\Delta T_\text{f}}{\text{K}_\text{f}} = \frac{0.6}{1.86} = 0.322 \text{ m} \).
Part (i)(2) \( \Delta T_\text{b} = \text{K}_\text{b} \times m = 0.512 \times 0.322 = 0.165^\circ\text{C} \). Boiling point = \( 100.165^\circ\text{C} \).
Part (i)(3) Relative lowering of vapour pressure equals mole fraction of solute: \( \frac{\Delta P}{P^\circ} = \frac{m}{m + 55.5} = \frac{0.322}{55.822} = 0.00577 \). Lowering of vapour pressure = \( 0.00577 \times 23.756 = 0.137 \text{ mm of Hg} \).
2. Part (ii) Observed \( \Delta T_\text{b} = 100.975 - 100 = 0.975^\circ\text{C} \).
Calculated \( \Delta T_\text{b} (\text{normal}) = \frac{\text{K}_\text{b} \times W_2 \times 1000}{M_2 \times W_1} = \frac{0.52 \times 1.23 \times 1000}{164 \times 10} = 0.39^\circ\text{C} \).
Van't Hoff factor \( i = \frac{\text{Observed } \Delta T_\text{b}}{\text{Calculated } \Delta T_\text{b}} = \frac{0.975}{0.39} = 2.5 \).
Teacher's Note:
a) Apply appropriate formulas relating freezing point depression, boiling point elevation, and vapour pressure lowering.
b) The van't Hoff factor is the ratio of experimental colligative property value to the theoretical normal value.
Question 17: [3 Marks]
(a) (i)Write the IUPAC names of the following complexes:
(1) \( [\text{Cu(NH}_3)_4]\text{SO}_4 \)
(2) \( [\text{Co(en)}_2\text{Cl}_2] \)
(3) \( \text{K}_3[\text{Al(C}_2\text{O}_4)_3] \)
(ii) With reference to the coordination complex ion \( [\text{Fe(H}_2\text{O)}_6]^{2+} \) answer the following: (at. No. of \text{Fe}=26)
(1) Give the IUPAC name of the complex ion.
(2) What is the oxidation number of the central metal ion?
(3) How many unpaired electrons are there in the complex ion?
(4) State The type of hybridisation of the complex ion.
Answer:
1. Part (i)(1) Tetraamminecopper(II) sulphate.
Part (i)(2) Dichloridobis(ethane-1,2-diamine)cobalt(III) (assuming chloride counter ion if specified, or neutral complex depending on bracket charge).
Part (i)(3) Potassium trioxalatoaluminate(III).
2. Part (ii)(1) Hexaaquairon(II) ion.
Part (ii)(2) +2.
Part (ii)(3) 4 unpaired electrons (\text{Fe}^{2+} \text{ is } 3\text{d}^6: t_{2\text{g}}^4 e_\text{g}^2$).
Part (ii)(4) \( \text{sp}^3\text{d}^2 \) (outer orbital complex).
Teacher's Note:
a) Follow standard IUPAC rules for naming coordination compounds (cation first, alphabetical order of ligands).
b) Determine metal oxidation state and d-electron configuration carefully to find unpaired electrons.
OR
(b) (i) Name of the type of isomerism exhibited by the following pairs of compounds:
(1) \( [\text{Co(ONO)(NH}_3)_5]\text{}^{2+} \) and \( [\text{Co(NO}_2)(\text{NH}_3)_5]\text{}^{2+} \)
(2) \( [\text{Cr(H}_2\text{O)}_4\text{Cl}_2].\text{Cl}.2\text{H}_2\text{O} \) and \( [\text{Cr(H}_2\text{O)}_5\text{Cl}]\text{Cl}_2.\text{H}_2\text{O} \)
(3) \( [\text{Co(NH}_3)_6][\text{Cr(CN)}_6] \) and \( [\text{Cr(NH}_3)_6][\text{Co(CN)}_6] \)
(ii) Using the valence bond approach, predict the shape, hybridisation and magnetic behaviour of \( [\text{Ni(CO)}_4] \). (at. no. of \text{Ni}=28) [3 Marks]
Answer:
1. Part (i)(1) Linkage isomerism.
Part (i)(2) Hydrate isomerism.
Part (i)(3) Coordination isomerism.
2. Part (ii) Nickel atom configuration: \( [\text{Ar}] 3\text{d}^8 4\text{s}^2 \). In \( [\text{Ni(CO)}_4] \), \text{Ni} is in 0 oxidation state. CO is a strong field ligand forcing electron pairing, resulting in \( sp^3 \) hybridization, tetrahedral shape, and diamagnetic behaviour (zero unpaired electrons).
Teacher's Note:
a) Identify isomerism types by comparing ligand linkage modes, solvent distribution inside/outside coordination spheres, or interchange of ligands between cationic and anionic complexes.
b) Carbonyl ligands (\text{CO}) cause electron pairing in central metal atoms due to strong ligand field effects.
Question 18: [3 Marks]
(a) (i) Give balanced chemical equations for the following reactions:
(1) Phenol is treated with ice cold alkaline solution of benzene diazonium chloride.
(2) Diethyl ether is treated with phosphorous pentachloride.
(3) Ethyl alcohol is treated with thionyl chloride.
(ii) Give one chemical test each to distinguish between the following pairs of compounds:
(1) Ethanol and dimethyl ether
(2) Propan-1-ol and propan-2-ol
Answer:
1. Part (i)(1) \( \text{C}_6\text{H}_5\text{OH} + \text{C}_6\text{H}_5\text{N}_2^+\text{Cl}^- \xrightarrow{\text{NaOH}} \text{p-hydroxyazobenzene} + \text{NaCl} + \text{H}_2\text{O} \)
Part (i)(2) \( (\text{C}_2\text{H}_5)_2\text{O} + \text{PCl}_5 \rightarrow 2\text{C}_2\text{H}_5\text{Cl} + \text{POCl}_3 \)
Part (i)(3) \( \text{C}_2\text{H}_5\text{OH} + \text{SOCl}_2 \rightarrow \text{C}_2\text{H}_5\text{Cl} + \text{SO}_2 + \text{HCl} \)
2. Part (ii)(1) Ethanol reacts with sodium metal to evolve hydrogen gas, whereas dimethyl ether does not.
Part (ii)(2) Propan-2-ol gives positive iodoform test (\text{I}_2/\text{NaOH}), whereas propan-1-ol does not.
Teacher's Note:
a) Coupling reaction of phenol with diazonium salts yields coloured azo dyes.
b) Lucas test or iodoform test effectively distinguishes between different alcohol isomers.
OR
(b) (i) Write chemical equations to illustrate the following name reactions:
(1) Williamson's synthesis
(2) Esterification reaction
(3) Reimer-Tiemann rection
(ii) Identify the compounds A and B in the given reactions: [3 Marks]
[Figure: Reaction (1) \( \text{C}_2\text{H}_5\text{OH} \xrightarrow{\text{Cu}/\Delta} \text{A} \xrightarrow{\text{dil. NaOH}} \text{B} \); Reaction (2) Phenol \( \xrightarrow{\text{Zn dust}} \text{A} \xrightarrow{\text{CH}_3\text{COCl} / \text{anhy. AlCl}_3} \text{B} \)]
Answer:
1. Part (i)(1) Williamson's synthesis: \( \text{R-ONa} + \text{R'X} \rightarrow \text{R-O-R'} + \text{NaX} \).
Part (i)(2) Esterification: \( \text{RCOOH} + \text{R'OH} \rightleftharpoons \text{RCOOR'} + \text{H}_2\text{O} \).
Part (i)(3) Reimer-Tiemann: Phenol treated with chloroform and aqueous NaOH to form salicylaldehyde.
2. Part (ii)(1) A = Acetaldehyde (\text{CH}_3\text{CHO}), B = Aldol condensation product (\text{CH}_3\text{CH(OH)CH}_2\text{CHO}).
Part (ii)(2) A = Benzene (\text{C}_6\text{H}_6), B = Acetophenone (\text{C}_6\text{H}_5\text{COCH}_3).
Teacher's Note:
a) Name reactions are core scoring elements in organic chemistry.
b) Trace multi-step conversions carefully (e.g., alcohol dehydrogenation followed by aldol condensation).
Free study material for Chemistry
Practice Exam Question Papers for Class 12 Chemistry ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions
Understanding Exam Patterns with ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions
Access structured past examination sets for Class 12 Chemistry. Solving the ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions provided above helps students understand actual exam difficulty levels, question formats, and topic distributions for both descriptive and objective sections.
Why Practice Class 12 Chemistry Question Papers?
Reviewing official papers clarifies the exact marking scheme and structural layout established by the ISC, enabling students to structure answers for maximum score potential.
Additional Study Resources for Class 12 Chemistry
Download digital copies of these papers for convenient offline revision anywhere. Cross-check your completed steps against our expert solution guides to ensure complete accuracy.
FAQs
The ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions is available for download on StudiesToday.com. It includes complete set with all sections so that Class 12 students can practice with the exact same paper that came in the ISC exams.
Yes, the solutions for ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions are prepared by subject matter experts as per official marking scheme. Class 12 students will understand the structure of answers and 'step-marks' methodology Chemistry.
Solving previous year papers like ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions is important to understand repeat themes and question difficulty levels of Chemistry. It helps Class 12 students to test their time management skills too.
Yes, where applicable, ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions is available in both English and Hindi mediums. All students from Class 12 can access Chemistry study material in their preferred language.
No, all previous year question papers on StudiesToday, including ISC Class 12 Chemistry Board Exam Question Paper 2020 with Solutions, are provided free of charge in mobile-friendly PDF.