SB Mathur Physics Solutions Chapter 3 Integer Answer Type Question Part 1

Download JEE Physics SB Mathur Textbook Solutions: Chapter 03 Integer Answer Type Question

Access comprehensive textbook solutions for Chapter 03 Integer Answer Type Question using the SB Mathur reference material for JEE Physics. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Access SB Mathur Textbook Answers and Solutions

View or download the dedicated Chapter 03 Integer Answer Type Question solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Physics.

SB Mathur Physics Solutions Chapter 3 Integer Answer Type Questions - 3.1 General Physics (Questions 1-9)

3.1 General Physics

Question 3.1.1. During Searle's experiment, the zero of a vernier scale lies between 3.20 × 10−2 m and 3.25 × 10−2 m of the main scale divisions. The 20th division of the vernier scale exactly coincides with one of the main scale divisions. When an additional load of 2 kg is applied to the wire, the zero of the vernier scale still lies between 3.20 × 10−2 m and 3.25 × 10−2 m of the main scale but now the 45th division of the vernier scale coincides with one of the main scale divisions. The length of the thin metallic wire is 2 m and its cross-sectional area is 8.0 × 10−7 m2. The least count of the vernier scale is 1.0 × 10−5 m. The maximum percentage error in the Young modulus of the wire is

Solution. Y = FL/(Al). Only the measurement of the extension l carries error, so ΔY/Y = Δl/l. From the observations, l1 = MS + 20(LC) and l2 = MS + 45(LC). Change in length = l2 − l1 = 25 × LC, and the maximum permissible error in measuring the elongation is one LC. Therefore (ΔY/Y) × 100% = (1 LC)/(25 LC) × 100% = 4%. Answer: 4

Teacher's Note: Only the extension is measured with error; relative error is least count over the measured extension.

Exam Note: Write ΔY/Y = Δl/l and use 25 LC; one mark for 4%.

Question 3.1.2. To find the distance d over which a signal can be seen clearly in foggy conditions, a railway engineer uses dimensional analysis and assumes that the distance depends on the mass density ρ of the fog, intensity (power/area) S of the light from the signal and its frequency f. The engineer finds that d is proportional to S1/n. The value of n is

Solution. d ∝ (density)a (power/area)b (frequency)c, so M0LT0 = (ML−3)a (MT−3)b (T−1)c = Ma+b L−3a T−3b−c. Thus a + b = 0, −3a = 1, −3b − c = 0, giving a = −1/3, b = 1/3, c = −1. Since b = 1/n = 1/3, n = 3. Answer: 3

Teacher's Note: Equate powers of M, L, T; intensity S has dimensions MT−3.

Exam Note: Set up three equations; marks for exponent b = 1/3.

Question 3.1.3. The energy of a system as a function of time t is given as E(t) = A2 exp(−αt), where α = 0.2 s−1. The measurement of A has an error of 1.25%. If the error in the measurement of time is 1.50%, find the percentage error in the value of E(t) at t = 5 s.

Solution. E = A2e−αt, so ln E = 2 ln A − αt. Given dA/A = 1.25% and dt/t = 1.50%. Then dE/E = ±2(dA/A) ± α t (dt/t) = ±2(1.25) ± 0.2 × 5 × 1.5 = ±2.50 ± 1.5 = ±4%. Answer: 4

Teacher's Note: The exponent αt multiplies the relative time error; errors add in magnitude.

Exam Note: Take log, differentiate, add absolute errors; 4% earns full marks.

Question 3.1.4. A train is moving along a straight line with a constant acceleration a. A boy standing inside the train throws a ball forward with a speed of 10 m s−1, at an angle of 60° to the horizontal. The boy has to move forward by 1.15 m inside the train to catch the ball back at the initial height. The acceleration of the train, in m s−2, is

Solution. Time of flight: 0 = 10(√3/2)t − ½(10)t², so t = √3 s. In the train frame the horizontal displacement is 1.15 = (10 cos 60°) t − ½ a t² = 5√3 − (3/2)a, giving a ≈ 5 m s−2 (check: (8.660 − 1.15)/1.5 = 5.007). Answer: 5

Teacher's Note: Vertical motion gives flight time; horizontal motion is relative to the accelerating train.

Exam Note: Find t = √3 s first, then use relative horizontal motion.

Question 3.1.5. Aeroplanes A and B are flying with constant velocities in the same vertical plane at angles 30° and 60° with respect to the horizontal respectively as shown in the figure. The speed of A is 100√3 m s−1. At time t = 0 s, an observer in A finds B at a distance of 500 m. This observer sees B moving with a constant velocity perpendicular to the line of motion of A. If at t = t0, A just escapes being hit by B then t0 in seconds is

Figure: A flies along a line at 30° to the horizontal and B along a line at 60° to the horizontal, both in the same vertical plane, with B ahead of and above A's line.

Solution. The velocity of B relative to A is perpendicular to the line of motion of A. From the vector triangle, VB cos 30° = VA = 100√3 m s−1, so VB = 200 m s−1. Time t0 = relative distance/relative speed = 500/(VB sin 30°) = 500/(200 × ½) = 5 s. Answer: 5

Teacher's Note: Relative velocity is perpendicular to A's path, so resolve VB along A's direction.

Exam Note: Resolve along A's line to get VB; time = distance/relative speed.

Question 3.1.6. A rocket is moving in a gravity-free space with a constant acceleration of 2 m s−2 along the +x direction (see figure). The length of a chamber inside the rocket is 4 m. A ball is thrown from the left end of the chamber in the +x direction with a speed of 0.3 m s−1 relative to the rocket. At the same time, another ball is thrown in the −x direction with a speed of 0.2 m s−1 from the right end relative to the rocket. The time in seconds when the two balls hit each other is

Figure: a 4 m long chamber in a rocket accelerating at a = 2 m s−2 along +x; ball A at the left end moves right at 0.3 m s−1, ball B at the right end moves left at 0.2 m s−1.

Solution. Consider the motions of both balls relative to the rocket; in the rocket frame each ball feels a pseudo-acceleration of 2 m s−2 towards the left wall. The maximum distance of ball A from the left wall = u²/2a = (0.3)²/(2 × 2) ≈ 0.02 m. Ball B collides with ball A when it is very close to the left wall, so for B: S = ut + ½at², 4 = 0.2t + ½·2·t² = 0.2t + t². Solving, t ≈ 1.9 s, i.e. the nearest integer is 2 s. (Check: t = (−0.2 + √16.04)/2 = 1.90.) Answer: 2

Teacher's Note: Work in the rocket frame; ball A turns back almost immediately, so the meeting is near the left wall.

Exam Note: Rocket frame; S = ut + ½at² for B.

Question 3.1.7. A block of mass 0.18 kg is attached to a spring of force constant 2 N m−1. The coefficient of friction between the block and the floor is 0.1. Initially the block is at rest and the spring is unstretched. An impulse is given to the block as shown in the figure. The block slides a distance of 0.06 m and comes to rest for the first time. The initial velocity of the block in m s−1 is v = N/10. Then N is

Figure: block on a rough floor attached to a spring fixed to a wall on the right; the impulse acts on the block towards the wall.

Solution. From the work–energy principle, −½kx² − μmgx = 0 − ½mv². Here ½(2)(0.06)² + 0.1(0.18)(10)(0.06) = 0.0036 + 0.0108 = 0.0144 J = ½(0.18)v², so v² = 0.16, v = 0.4 = 4/10, so N = 4. Answer: 4

Teacher's Note: Initial kinetic energy goes into spring energy plus friction work over 0.06 m.

Exam Note: Write the energy balance with both terms; 4 earns the mark.

Question 3.1.8. A particle of mass 0.2 kg is moving in one dimension under a force that delivers a constant power of 0.5 W to the particle. If the initial speed (in m s−1) of the particle is zero, the speed (in m s−1) after 5 s is

Solution. Power = dW/dt = 0.5 W, so work done = ∫05 0.5 dt = 2.5 J. By the work–energy theorem W = KEf − KEi, so 5/2 = ½(2/10)v², hence v = 5 m s−1. Answer: 5

Teacher's Note: Constant power gives work = P·t; equate to change in kinetic energy.

Exam Note: Work = 2.5 J then ½mv²; do not use v = at.

Question 3.1.9. Consider an elliptical-shaped rail PQ in the vertical plane with OP = 3 m and OQ = 4 m. A block of mass 1 kg is pulled along the rail from P to Q with a force of 18 N, which is always parallel to line PQ (see the figure). Assuming no frictional losses, the kinetic energy of the block when it reaches Q is (n × 10) joules. The value of n is (take g = 10 m s−2)

Figure: an elliptical rail from P (at ground level, 3 m from O) up to Q (4 m directly above O); the chord PQ is the line of action of the 18 N force.

Solution. From the work–energy principle, Wgravity + Wforce = ΔKE = (KE)f − (KE)i. Since PQ = 5 m, −mgh + Fd = (KE)f, so −1 × 10 × 4 + 18(5) = 50 = n × 10, giving n = 5. Answer: 5

Teacher's Note: Force acts along the chord, so work is 18 × 5; gravity depends on height.

Exam Note: Use chord length 5 m; 90 − 40 = 50 J.

Step-by-Step SB Mathur Solutions for JEE Math

Download SB Mathur Solutions for JEE

Explore reliable mathematical solutions for SB Mathur Physics Solutions Chapter 3 Integer Answer Type Question Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these SB Mathur Solutions for JEE Physics?

They are chapter-wise solved questions from the SB Mathur book for JEE Physics. Each answer is explained step by step so you can check your work and revise.

Are the SB Mathur JEE Physics Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these SB Mathur solutions for JEE Physics?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising SB Mathur JEE Physics questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Physics Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.