LA Sena Solutions for JEE Physics: Chapter 03 Electrostatics
Explore reliable textbook solutions for Chapter 03 Electrostatics tailored for JEE learners using LA Sena methodologies. Utilizing these Physics answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice JEE Physics Solutions: Chapter 03 Electrostatics
Navigate directly to the solved Physics textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Electrostatics - Problems 3.1 to 3.7
Chapter 3. Electrostatics
Question 3.1. Three charges are placed at the vertices of an isosceles right triangle, with charges +Q and −Q at the acute angles and a charge +2Q at the right angle. Determine which of the numbered vectors (1 to 8, drawn in Fig. 3.1 as eight arrows radiating from one point, numbered 1 to 8) coincides in direction with the field produced by these charges at the point that is the middle of the hypotenuse.
Solution. The components of the electric field strength generated by the charges at the acute angles are equal and are directed toward the negative charge. If we denote the length of the hypotenuse by 2a, each of these components is Q/4πε0εa² and their sum is Q/2πε0εa². The component of the electric field generated by the charge +2Q is the same. It is directed at right angles to the hypotenuse away from the right angle. The resultant field strength is directed parallel to the leg connecting the charges +2Q and −Q along vector 3.
Teacher's Note: Add field vectors component-wise; the midpoint is at distance a from all three charges.
Exam Note: Show both equal components, then their vector sum.
Question 3.2. Two point-like charges a and b whose strengths are equal in absolute value are positioned at a certain distance from each other. Assuming the field strength is positive in the direction coinciding with the positive direction of the r axis, determine the signs of the charges for each distribution of the field strength between the charges shown in Fig. 3.2 (a), (b), (c) and (d). (In (a) the field curve stays positive and has a minimum midway; in (b) it falls from +∞ near a, crosses zero midway and goes to −∞ near b; in (c) it stays negative with a maximum midway; in (d) it rises from −∞ near a, crosses zero midway and goes to +∞ near b.)
Solution. Since all the electric field vectors lie on a single straight line, the vector sum may be replaced with the scalar sum. For unlike charges the direction of the resultant vector does not change while for like charges it does. In case (a) the field is positive everywhere: the left charge is positive and the right charge is negative. In case (c) the left charge is negative and the right charge is positive. In (b) and (d) the field changes sign at the midpoint, which can occur only if the charges are like. Allowing for the relationship between field direction and sign of the generating charge: in (b) both charges are positive, in (d) both charges are negative.
Teacher's Note: Field is continuous between unlike charges but reverses sign between like charges.
Exam Note: Link sign change of field to like charges first.
Question 3.3. Two point-like charges are positioned at points a and b. The field strength to the right of the charge Qb on the line that passes through the two charges varies according to a law represented schematically in Fig. 3.3 (field E is positive along +x, diverges to −∞ at b, crosses zero at x1, then reaches a maximum at x2 and decays). The distance between the charges is l. Find the signs of the charges and, bearing in mind that the field strength at point x1 is zero, the ratio of the absolute values of charges Qa and Qb and the coordinate x2 of the point where the field strength is maximal.
Solution. Both field vectors lie on a single line, so they add algebraically. The field strength to the right of Qb, in the immediate vicinity of the charge, is negative (the vector is directed toward the charge). The field may be positive to the right of Qb only if Qa is positive and greater in absolute value than Qb. The field is zero at x1 if Qa/(l + x1)² − Qb/x1² = 0, whence Qa/Qb = ((l + x1)/x1)². At all points to the right of Qb the field is Ex = Qa/(l + x)² − Qb/x² (in units of 1/4πε0ε). Setting dEx/dx = 0 gives the maximum at x2 = l/((Qa/Qb)1/3 − 1).
Teacher's Note: Near-charge field sign fixes Qb negative; zero of E gives the ratio.
Exam Note: Write E(x), set E=0 and dE/dx=0 separately.
Question 3.4. Two mutually perpendicular straight conductors carry evenly distributed charges with linear densities τ1 and τ2. Among the lines of force representing the field generated by these conductors there is a straight line passing through the point of intersection of the conductors. At what angle α with respect to the conductor with charge density τ2 does this line pass? (Note in the book: the statement is not quite proper, since the electrostatic interaction makes an even charge distribution impossible; the difficulty is overcome by assuming each conductor consists of a large number of sufficiently small sections isolated from each other.)
Solution. The direction of the electric field vector at a point with coordinates x and y (see Fig. 3.4, where the τ2 conductor lies along the x axis and the τ1 conductor along the y axis) is determined by the two components Ex = τ2/2πε0x and Ey = τ1/2πε0y. For the extension of the resultant vector to pass through the origin, where the conductors intersect, the slope of the vector must be equal to y/x, that is, Ey/Ex = τ1x/(τ2y) = y/x. Thus tan α = y/x = √(τ1/τ2).
Teacher's Note: A field line through the origin has slope equal to y/x of the point.
Exam Note: Equate Ey/Ex to y/x, then solve.
Question 3.5. An infinitely long straight conductor carrying a linear density +τ and a point charge −Q are at a certain distance a from each other (Fig. 3.5: the conductor is vertical, the point charge lies to its right on a horizontal line; region I is left of the conductor, II between, III right of the charge). In which of the three regions (I, II or III) are there points that lie on the line passing through the point charge perpendicular to the conductor and at which the field strength is zero?
Solution. No such point can exist in region II, since the electric field vectors of the two charges point in the same direction (from the linear charge to the point charge). In regions III and I the vectors point in different directions. Region III (right of the point charge): with x the distance from the point charge, E1 = −Q/4πε0x² and E2 = τ/2πε0(x + a). The sum is zero if Q/2x² = τ/(a + x), whence x = Q/4τ ± √(Q²/16τ² + aQ/2τ). Only the plus sign has meaning (the minus sign corresponds to a point to the left of the point charge, where the fields add). So region III always has one such point. Region I (left of the linear charge): taking x to the left from the conductor, E1 = −Q/4πε0(a + x)², E2 = τ/2πε0x, opposite in direction. Zero field requires x² + (2a − Q/2τ)x + a² = 0, so x = ½(Q/2τ − 2a) ± √(¼(Q/2τ − 2a)² − a²). The field is zero in region I if the radicand is positive, that is, if Q ≥ 8aτ; then region I contains two such points. (The book also gives a schematic graph of E along the x axis.)
Teacher's Note: Check each region for opposite field directions, then solve the quadratic.
Exam Note: Region II never; III always; I only if Q ≥ 8aτ.
Question 3.6. Two mutually perpendicular infinitely long straight conductors carrying uniformly distributed charges of linear densities τ1 and τ2 are positioned at a distance a from each other (Fig. 3.6). How does the interaction between the conductors depend on a?
Solution. Dimensional analysis first. The force may depend on the charge densities, the distance and the absolute permittivity εa = ε0ε. Dimensions: [F] = LMT−2, [τ] = L−1TI, [εa] = L−3M−1T4I², [a] = L. Taking F = Cτpεaqar gives 1 = −p − 3q + r, 1 = −q, −2 = p + 4q, 0 = p + 2q, hence p = 2, q = −1, r = 0, i.e. F = C τ1τ2/ε0ε (3.6.1). The interaction does not depend on the distance between the conductors. C is found by direct integration. The field of the first conductor at distance r is E = τ1/2πε0εr, so dF = Eτ2dx on an element dx of the second conductor. Only the component perpendicular to the second conductor, dF cos α, survives (the longitudinal parts cancel by symmetry). With r = a/cos α and dx = a dα/cos²α: dF = (τ1τ2/2πε0ε) dα. Integrating from −π/2 to +π/2: F = τ1τ2/2ε0ε, independent of a. Hence C = 1/2.
Teacher's Note: Dimensional analysis gives zero power of a; integration fixes the constant 1/2.
Exam Note: Show exponents p, q, r then the integral.
Question 3.7. Near an infinitely large flat plate with a surface charge density σ on each side, the field strength is E = σ/ε0ε, while the field produced by a point charge at a distance r from the charge is E = Q/4πε0εr². Prove that for a uniformly charged disk with a surface charge density σ (on each side), the electric field strength on the axis of the disk is the same as for an infinitely large flat plate if the distances are small in comparison with the disk's radius R, and is the same as for a point charge if the distances are large. (Note: textbooks usually give half this value for the plate, since there the charge is on a geometric plane.)
Solution. The element of the disk bounded by radii ρ and ρ + dρ and angle dφ carries a charge (both sides) 2σρ dρ dφ. At distance z from it, with r the distance along the axis from the disk centre, its field is E = 2σρ dρ dφ/4πε0εz². Only the component along the axis matters. Integrating over φ (0 to 2π), the ring between ρ and ρ + dρ gives dE = σρ dρ cos α/ε0εz² (3.7.1; the book prints this without ε0ε). With z = r/cos α, ρ = r tan α, dρ = r dα/cos²α this becomes dE = (σ/ε0ε) sin α dα. Integrating from α = 0 to αm (the edge of the disk): E = (σ/ε0ε)(1 − cos αm) = (σ/ε0ε)(1 − r/√(R² + r²)) (3.7.2). For r ≪ R, α is close to 90°, so E ≈ σ/ε0ε, as for an infinite plate. For r ≫ R: cos αm = r/√(R² + r²), so 1 − 1/√(1 + R²/r²) ≈ R²/2r², giving E = σR²/2ε0εr². Since σ = Q/2πR² (charge Q on both sides of the disk), E = Q/4πε0εr², as for a point charge. (Fig. 3.7b of the book plots E/E0 against r/R: curve 1 for the disk starts at 1.0 and falls smoothly to meet curve 2, the point-charge field, at large r/R; line 3 is the infinite plate at 1.0.)
Teacher's Note: Sum ring contributions along the axis, then expand for r ≪ R and r ≫ R.
Exam Note: Integral gives 1 − cos αm; expand both limits.
JEE Mathematics: LA Sena Solutions for LA Sena Solutions Physics Chapter 3 Electrostatics Part 1
Access JEE Mathematics Solutions
Review detailed solutions for JEE Mathematics. The LA Sena Solutions Physics Chapter 3 Electrostatics Part 1 PDF provides comprehensive answers mapped to standard LA Sena Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.
Mastering Core Concepts with LA Sena Solutions
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Explore More Study Resources for JEE Math
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the LA Sena book for JEE Physics. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.