Step-by-Step P Bahadur Solutions for JEE Chemistry Chapter 07 Electrolysis Electrochemical Cells
Explore reliable textbook solutions for Chapter 07 Electrolysis Electrochemical Cells tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Download Chapter 07 Electrolysis Electrochemical Cells Textbook Solutions PDF
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Chapter 7 Electrolysis and Electrochemical Cells - Numerical Problems 89 to 118, Objective Problems and Answers
Numerical Problems (continued): Solutions 89 to 118
Question 89. (Question statement is not printed in the source book; solution given below.)
Solution. Initially, ECu²⁺/Cu = E° + (0.059/2) log[Cu²⁺] = 0.344 + (0.059/2) log 1 = 0.344 V
EBi³⁺/Bi = 0.226 + (0.059/3) log[Bi³⁺] = 0.226 + (0.059/3) log 1 = 0.226 V
Thus, on passing current Cu²⁺ is deposited first, until ECu²⁺/Cu falls to the Bi value; only then will Bi³⁺ be deposited.
ECu²⁺/Cu = 0.344 + (0.059/2) log[Cu²⁺] = 0.226
log[Cu²⁺] = −0.118/0.0295 = −4
∴ [Cu²⁺] = 10−4 M
Corrected: the book prints 0.266 V for EBi³⁺/Bi; with E° = 0.226 V the value is 0.226 V, which is what gives 10−4 M.
Teacher's Note:Compare electrode potentials: the metal with higher reduction potential deposits first; second metal starts when the first's potential drops to.
Exam Note: Equate the two potentials, solve log; 10−4 M.
Question 90. (Question statement is not printed in the source book; solution given below.)
Solution. The half-cell reaction is MnO4− + 8H+ + 5e → Mn²⁺ + 4H2O
ERP = E°RP + (0.059/5) log {[MnO4−][H+]8/[Mn²⁺]} = E°RP + 0.0118 log (1×1/1)
∴ ERP = E°RP
If [H+] = 10−4: ERP = E°RP + 0.0118 log [1×(10−4)8/1] = E°RP − 0.38 V
i.e. the couple MnO4−/Mn²⁺ shows a decrease in its ERP by 0.38 V (an increase in its EOP by 0.38 V) and thus less oxidising power.
Teacher's Note: Eighth power of [H⁺] makes pH matter: 0.0118 × log(10⁻³²) = −0.38 V.
Exam Note: Write the Nernst expression with [H⁺]8; answer 0.38 V decrease.
Question 91. (Question statement is not printed in the source book; solution given below.)
Solution. Anode: H2 → 2H+ + 2e; Cathode: 2Ag+ + 2e → 2Ag
Ecell = E°OP,H2 + E°RP,Ag + (0.059/2) log {[Ag+]2·PH2/[H+]2}
0.503 = 0 + 0.80 + (0.059/2) log [Ag+]2
[Ag+] = 9.25×10−6 M
Mole of Ag+ in 350 mL = 9.25×10−6 × 350/1000
Mass of Ag+ = 9.25×10−6 × (350/1000) × 108 = 3.497×10−4 g
% of Ag in 1.05 g alloy = (3.497×10−4/1.05) × 100 = 0.033%
∴ % of lead in alloy = 99.967%
Teacher's Note: Cell emf gives [Ag⁺] in the dissolved solution; scale to the volume to get mass of Ag.
Exam Note: Use H₂/Ag⁺ cell, P(H₂) = 1; lead = 99.967%.
Question 92. (Question statement is not printed in the source book; solution given below.)
Solution. E°OP is more for Pb and thus, Anode: Pb → Pb²⁺ + 2e; Cathode: Hg22+ + 2e → Hg
Cell is Pb | PbSO4 (saturated) || Hg2SO4 (saturated) | Hg
Ecell = E°OP,Pb + E°RP,Hg + (0.059/2) log {[Hg22+]/[Pb²⁺]}, with E°OP,Pb = 0.126 V and E°RP,Hg = +0.789 V
For PbSO4 ⇌ Pb²⁺ + SO42−: Ksp = [Pb²⁺][SO42−] = [Pb²⁺]², [Pb²⁺] = √Ksp = √(2.43×10−8)
For Hg2SO4 ⇌ Hg22+ + SO42−: [Hg22+] = √Ksp = √(1.46×10−6)
∴ Ecell = 0.126 + 0.789 + (0.059/2) log {√(1.46×10−6)/√(2.43×10−8)} = 0.941 V
Teacher's Note: Saturated salt: ion concentration is √Ksp; put them in the Nernst quotient.
Exam Note: Find ion concentrations from Ksp first; E = 0.941 V.
Question 93. (Question statement is not printed in the source book; solution given below.)
Solution. EAg⁺/Ag = E°Ag⁺/Ag + (0.059/1) log[Ag+] …(1)
For a saturated solution of AgI, [Ag+] = [I−], so [Ag+] = √Ksp,AgI = √(8.7×10−17) = 9.32×10−9 …(2)
By Eq. (1), EAg⁺/Ag = 0.799 + 0.059 log(9.32×10−9) = 0.799 − 0.474 = 0.32 V
Also Ag → Ag+ + e (E°OP = −0.799 V); AgI(s) + e → Ag + I−
Ecell = E°OP,Ag/Ag⁺ − 0.059 log[Ag+] + E°RP,I⁻/AgI/Ag + 0.059 log (1/[I−]) …(3)
Ecell = 0 at equilibrium, thus from Eq. (3):
E°OP,Ag/Ag⁺ + E°RP,I⁻/AgI/Ag = 0.059 log [Ag+][I−] = 0.059 log Ksp,AgI
−0.799 + E°RP,I⁻/AgI/Ag = 0.059 log (8.7×10−17) = −0.948
E°RP,I⁻/AgI/Ag = −0.948 + 0.799 = −0.149 V
Teacher's Note: Silver electrode in saturated AgI: [Ag⁺] = √Ksp; E°(AgI/Ag) is E° adjusted by log Ksp.
Exam Note: Use E° = 0.059 log Ksp + E°(Ag⁺/Ag); −0.149 V.
Question 94. (Question statement is not printed in the source book; solution given below.)
Solution. Ag(s) + ½Cl2(g) → AgCl(s); ΔG°1 = −109 kJ …(1)
Ag(s) → Ag+(aq.) + e; ΔG°2 = +77 kJ …(2)
½Cl2(g) + e → Cl−(aq.); ΔG°3 = −129 kJ …(3)
By Eqs. (1) − (2) − (3): Ag+(aq.) + Cl−(aq.) → AgCl(s); ΔG°4 = −109 − 77 + 129 = −57 kJ
−ΔG° = nE°F: 57×10³ = 1 × E° × 96500, ∴ E°cell = 0.59 V
The cell is Ag | AgCl(s) | Cl−(aq.) || Ag+(aq.) | Ag (anode: left)
Ecell = E°OP,Ag/AgCl/Cl⁻ − 0.059 log (1/[Cl−]) + E°RP,Ag⁺/Ag + 0.059 log[Ag+]
At equilibrium Ecell = 0, thus E°Ag/AgCl/Cl⁻ + E°RP,Ag⁺/Ag = −0.059 log [Ag+][Cl−]
E°cell = −0.059 log Ksp,AgCl; 0.59 = −0.059 log Ksp, ∴ Ksp,AgCl = 1×10−10 M²
Solubility S = √Ksp = √10−10 = 10−5 M
Mole of AgCl in its 100 mL saturated solution = 10−5 × 100/1000 = 10−6
Mole of Zn added = 6.539×10−2/65.39 = 10−3
For Ag → Ag+ + e; ΔG° = +77 kJ, −ΔG° = nE°F, E°Ag/Ag⁺ = −77×10³/(1×96500) = −0.80 V
For the redox change on addition of Zn to AgCl saturated solution: Zn → Zn²⁺ + 2e (E°OP = +0.76 V); 2Ag+ + 2e → 2Ag (E°RP = +0.80 V); Zn + 2Ag+ → Zn²⁺ + 2Ag, E°cell = 1.56 V
Ecell = E°cell + (0.059/2) log {[Ag+]2/[Zn²⁺]}; at equilibrium Ecell = 0, so log {[Zn²⁺]/[Ag+]2} = 1.56×2/0.059 = 52.88
KC = [Zn²⁺]/[Ag+]2 = 7.61×1052
Since KC is appreciably high, nearly the whole of Ag+ is converted to Ag. Thus mole of Ag formed = mole of Ag+ in 100 mL solution = 10−6. Note that Zn is in excess.
Teacher's Note:Combine formation free energies to get ΔG for Ag⁺ + Cl⁻ → AgCl; very large K means complete displacement of.
Exam Note:Apply Hess to ΔG values; Ksp = 10−10, Ag formed = 10−6.
Question 95. (Question statement is not printed in the source book; solution given below.)
Solution. Cell: Pt, H2(g) | HCl(aq.) || AgCl(s) | Ag(s)
(i) Anode: ½H2 → H+ + e; Cathode: AgCl + e → Ag + Cl−; Cell reaction: ½H2 + AgCl → H+ + Ag + Cl−
(ii) −ΔG° = nE°F = 1 × 0.23 × 96500 = 22195 J (at 15 °C); −ΔG° = 1 × 0.21 × 96500 = 20265 J (at 35 °C)
ΔG° = ΔH° − TΔS°: −22195 = ΔH° − 288ΔS°; −20265 = ΔH° − 308ΔS°
Subtracting: ΔS° = −96.5 J; ΔH° = −22195 − 288 × (−96.5) = −49987 J = −49.987 kJ
(iii) For the reaction at AgCl(s)/Ag electrodes, Ecell = 0 at equilibrium: ERP,Cl⁻/AgCl/Ag + EOP,H = 0.22 at 25 °C
∴ ERP,Cl⁻/AgCl/Ag = 0.22 V at 25 °C; E°Cl⁻/AgCl/Ag = E°Ag⁺/Ag + 0.059 log Ksp,AgCl
0.22 = 0.80 + 0.059 log Ksp, ∴ Ksp,AgCl = 1.47×10−10
Solubility of AgCl = √Ksp = √(1.47×10−10) = 1.21×10−5 mol litre−1
Teacher's Note: Two E° values at two temperatures give ΔS° and ΔH° through ΔG° = ΔH° − TΔS°.
Exam Note: Subtract the two ΔG° equations to get ΔS° first.
Question 96. (Question statement is not printed in the source book; solution given below.)
Solution. When two half reactions are added to give an overall reaction, the number of moles of electrons involved in each half reaction and overall reaction are necessarily the same, e.g.
M1 → M1n₁+ + n1e; −ΔG°1 = n1E°1F
M2n₂+ + n2e → M2; −ΔG°2 = n2E°2F
M1 + M2n₂+ → M1n₁+ + M2; −ΔG°3 = n3E°3F
∴ ΔG°3 = ΔG°1 + ΔG°2, n3E°3F = n1E°1F + n2E°2F, or E°3 = (n1E°1 + n2E°2)/n3
Since n1 = n2 = n3, E°3 = E°1 + E°2.
Also, when two half reactions are added to give a third reaction with n1 ≠ n2 ≠ n3, e.g.
M1 → M1n₁+ + n1e; −ΔG°1 = n1E°1F
M1n₁+ → M1n₂+ + (n2 − n1)e; −ΔG°2 = (n2 − n1)E°2F
M1 → M1n₂+ + n2e; −ΔG°3 = n2E°3F
∴ ΔG°3 = ΔG°1 + ΔG°2, n2E°3F = n1E°1F + (n2 − n1)E°2F
∴ E°3 = [n1E°1 + n2E°2 − n1E°2]/n2
Teacher's Note: E° is intensive, so potentials add only when electron counts match; otherwise add free energies (ΔG = −nFE).
Exam Note: Add ΔG°, never E°, when electron numbers differ.
Question 97. (Question statement is not printed in the source book; solution given below.)
Solution. MnO4− + 8H+ + 5e → Mn²⁺ + 4H2O; E°1 = 1.51 V …(1); ∴ ΔG°1 = −5 × 1.51 × F = −7.55F
MnO2 + 4H+ + 2e → Mn²⁺ + 2H2O; E°2 = 1.23 V …(2); ΔG°2 = −2 × 1.23 × F = −2.46F
Subtracting Eq. (2) from (1): MnO4− + 4H+ + 3e → 2H2O + MnO2; E°3 = ?
ΔG°3 = −3E°3F = ΔG°1 − ΔG°2 = −7.55F + 2.46F = −5.09F
∴ E°3 = 5.09/3 = 1.70 volt
Teacher's Note: Different electron numbers (5, 2, 3): combine ΔG°, then divide by n = 3.
Exam Note: E° of MnO₄⁻/MnO₂ = 1.70 V; subtract ΔG°, not E°.
Question 98. (Question statement is not printed in the source book; solution given below.)
Solution. Given, Cu²⁺ + e → Cu+; E°1 = 0.15 V; ΔG°1 …(1)
Cu+ + e → Cu; E°2 = 0.5 V; ΔG°2 …(2)
Cu²⁺ + 2e → Cu; E°3 = ?; ΔG°3 …(3)
ΔG°1 = −1 × 0.15F = −0.15F; ΔG°2 = −1 × 0.5F = −0.5F
Adding: ΔG°1 + ΔG°2 = ΔG°3 = −0.65F = −2E°3F
∴ E°3 = 0.65/2 = 0.325 volt, i.e. X = +0.325 volt
For disproportionation 2Cu+ → Cu²⁺ + Cu (Cu+ → Cu²⁺ + e, E°OP = −0.15; Cu+ + e → Cu, E°RP = 0.5):
E°cell = E°OP,Cu⁺/Cu²⁺ + E°RP,Cu⁺/Cu = −0.15 + 0.5 = +0.35 V
Since E° of the reaction is positive, the reaction is feasible, i.e. disproportionation of Cu+ takes place; Cu+ acts as reductant and oxidant both.
Teacher's Note: Cu⁺ disproportionates when E°(reduction of Cu⁺) exceeds E°(Cu²⁺/Cu⁺).
Exam Note: Add ΔG° (−0.15F, −0.5F) to get 0.325 V; E°cell = +0.35 V.
Question 99. (Question statement is not printed in the source book; solution given below.)
Solution. Fe → Fe²⁺ + 2e; −ΔG°1 = 2E°1F …(1)
Fe²⁺ → Fe³⁺ + e; −ΔG°2 = E°2F …(2)
Fe → Fe³⁺ + 3e; −ΔG°3 = 3E°3F …(3)
Subtracting Eq. (1) from (3): Fe²⁺ → Fe³⁺ + e; −ΔG°3 + ΔG°1 = 3E°3F − 2E°1F …(4)
Comparing Eqs. (2) and (4): E°2F = 3E°3F − 2E°1F, ∴ E°3 = (2E°1 + E°2)/3, or 3E°3 = 2E°1 + E°2
Teacher's Note: Fe → Fe³⁺ is the sum of the two-step and one-step oxidations, so ΔG° adds with weights 2 and 1.
Exam Note: Relation: 3E°(Fe³⁺/Fe) = 2E°(Fe²⁺/Fe) + E°(Fe³⁺/Fe²⁺).
Question 100. (Question statement is not printed in the source book; solution given below.)
Solution. During electrolysis some Zn²⁺ will discharge and some Cu²⁺ will pass in solution.
Thus, w/E = 0.48 × 10 × 60 × 60/96500 = 0.18 eq
Mole of Cu²⁺ formed = mole of Zn²⁺ deposited = 0.09 = 90 m mole
∴ m mole of Zn²⁺ left = 100 × 1 − 90 = 10; m mole of Cu²⁺ left = 100 × 1 + 90 = 190
Both are present in 100 mL solution of each.
Ecell = E°OP,Zn/Zn²⁺ + E°RP,Cu²⁺/Cu + (0.059/2) log([Cu²⁺]/[Zn²⁺]) = 0.76 + 0.34 + (0.059/2) log (190/10)
Ecell = 1.137 V
Teacher's Note: Each faraday dissolves/deposits: the change in moles (0.09) shifts [Zn²⁺] down and [Cu²⁺] up in the same volume.
Exam Note: Use charge → equivalents → moles; ratio 190/10 in Nernst.
Question 101. (Question statement is not printed in the source book; solution given below.)
Solution. Note that the given cell will not work as an electrochemical cell since E°OP,Cu > E°OP,Ag. The equation for the electrochemical cell will be: Cu → Cu²⁺ + 2e; 2Ag+ + 2e → 2Ag
Thus emf of cell Cu | Cu²⁺ || Ag+ | Ag will be Ecell = E°OP,Cu + E°RP,Ag + (0.059/2) log {[Ag+]2/[Cu²⁺]}
Since [Ag+] = 1 M and [Cu²⁺] = 1 M, Ecell = E°cell + (0.059/2) log (1/1) = E°cell (where E°cell = E°OP,Cu + E°RP,Ag)
After the passage of 9.65 ampere for 1 hr, 9.65 × 60 × 60 coulomb charge, during which the cell reaction is reversed, Cu²⁺ are discharged from solution and Ag metal passes to ionic state. The reaction during passage of current: Cu²⁺ + 2e → Cu; 2Ag → 2Ag+ + 2e
Ag+ ions formed = 9.65 × 60 × 60/96500 eq = 0.36 eq = 0.36 mol
Cu²⁺ ions discharged = 0.36 eq = 0.18 mol
[Ag+]left = 1 + 0.36 = 1.36 M; [Cu²⁺]left = 1 − 0.18 = 0.82 M
New cell is Cu | Cu²⁺ (0.82 M) || Ag+ (1.36 M) | Ag
Ecell = E°cell + (0.059/2) log {(1.36)2/(0.82)} = E°cell + 0.010 volt
Thus, Ecell increases by 0.010 V.
Teacher's Note: Forced electrolysis reverses the cell reaction, so Ag⁺ rises and Cu²⁺ falls; recompute Nernst with new concentrations.
Exam Note:Count 0.36 F: Ag⁺ +0.36 M, Cu²⁺ −0.18 M; emf rises 0.010.
Question 102. (Question statement is not printed in the source book; solution given below.)
Solution. Cu²⁺ + 4NH3 ⇌ [Cu(NH3)4]²⁺
Kf = 1×1012 = [Cu(NH3)4]²⁺/([Cu²⁺][NH3]4) = 1.0/(x(2.0)4), ∴ x = 6.25×10−14 M
Note that due to the high value of Kf almost all of the Cu²⁺ ions are converted to Cu(NH3)42+ ion. Now
Ecell = E°OP,Zn/Zn²⁺ + E°RP,Cu²⁺/Cu + (0.059/2) log {Cu²⁺/Zn²⁺} = 0.76 + 0.34 + (0.059/2) log (6.25×10−14/1)
Ecell = 0.71 V
Teacher's Note: Large Kf leaves almost no free Cu²⁺; its tiny concentration lowers the Daniell cell emf.
Exam Note: Free [Cu²⁺] from Kf, then Nernst; answer 0.71 V.
Question 103. (Question statement is not printed in the source book; solution given below.)
Solution. For I cell, half reactions are: V²⁺ → V³⁺ + e; e + V⁴⁺ → V³⁺; V²⁺ + V⁴⁺ → 2V³⁺ …(A)
E°cell = E°V²⁺/V³⁺,OP + E°V⁴⁺/V³⁺,RP …(1)
For II cell, half reactions are: V³⁺ → V⁴⁺ + e; Ag+ + e → Ag(s); V³⁺ + Ag+ → V⁴⁺ + Ag(s) …(B)
E°cell = E°V³⁺/V⁴⁺,OP + E°Ag⁺/Ag,RP …(2)
0.439 = E°V³⁺/V⁴⁺,OP + 0.799, or E°V³⁺/V⁴⁺,OP = −0.360 V, or E°V⁴⁺/V³⁺,RP = +0.360 V
On substituting this value in Eq. (1): E°cell = E°V²⁺/V³⁺,OP + 0.360
With E°cell = 0.616 V: 0.616 = E°V²⁺/V³⁺,OP + 0.360, or E°V²⁺/V³⁺,OP = 0.256 V, or E°V³⁺/V²⁺,RP = −0.256 V
Teacher's Note: Chain the two cells through the shared V³⁺/V⁴⁺ couple, then reverse sign for oxidation to reduction.
Exam Note: Remember OP = −RP; answers: E°(V⁴⁺/V³⁺) = +0.36, E°(V³⁺/V²⁺) = −0.256 V.
Question 104. (Question statement is not printed in the source book; solution given below.)
Solution. According to the Gibbs-Helmholtz equation, heat of reaction ΔH is given by ΔH = nF[T(∂E/∂T)P − E]
T = 273 + 25 = 298 K, n = 2, F = 96500 C, E = +0.03 V and (∂E/∂T)P = −1.4×10−4 V/K
∴ ΔH = 2 × 96500[298 × (−1.4×10−4) − 0.03] = −13842 joule = −13.842 kJ mol−1
Teacher's Note: ΔH needs both E and its temperature coefficient; the T(∂E/∂T) term can outweigh E.
Exam Note: Use ΔH = nF[T(∂E/∂T) − E]; −13.842 kJ/mol.
Question 105. (Question statement is not printed in the source book; solution given below.)
Solution. For H2(g) + 2AgCl(s) + 2H2O(l) → 2Ag(s) + 2H3O+(aq.) + 2Cl−(aq.)
ΔG°reaction = G°products − G°reactants = 2G°Ag(s) + 2G°(H₃O⁺+Cl⁻) − G°H₂ − 2G°AgCl(s) − 2G°H₂O
= 0 + 2 × (−368.4) − 0 − 2 × (−109.7) − 2 × (−237.2) = −43.0 kJ (G° of pure element = 0, i.e. G°Ag = 0 and G°H₂ = 0)
Now ΔG° = −nE°F: −43×10³ = −2 × E° × 96500, E° = 0.2228 volt
Further E = E° + (0.059/2) log {PH₂/([H3O+]2[Cl−]2)} (solids = 1) = 0.2228 + (0.059/2) log {1/((0.01)2(0.01)2)} = 0.458 volt
Teacher's Note: Standard free energies of formation give ΔG°, then E° = −ΔG°/nF; Nernst corrects for 0.01 M ions.
Exam Note: Elements have G° = 0; n = 2; E = 0.458 V.
Question 106. (Question statement is not printed in the source book; solution given below.)
Solution. For the given cell reaction, ΔG° = −nE°F; ΔG° = −12 × 2.73 × 96500 J = −3.1613×103 kJ [n = 12 since 4Al° → 4Al³⁺ + 12e; 3O2 + 12e → 6O²⁻]
Now for the given reaction, ΔG° = 4 × G°f[Al(OH)4]− − 6 × G°f[H2O] − 4 × G°f[OH−] (also note that G°f for elements is zero)
−3.1613×103 = 4 × G°f[Al(OH)4]− − 6 × (−237.2) − 4 × (−157)
∴ G°f[Al(OH)4]− = −1303 kJ mol−1
Corrected: the book prints the value without its negative sign; the equation above gives (−3161.3 − 1423.2 − 628)/4 = −1303 kJ mol−1.
Teacher's Note: n = 12 comes from 4 Al giving 12 electrons; then solve for the unknown G°f using the products-minus-reactants relation.
Exam Note: Careful with n = 12 and signs; result is −1303 kJ/mol.
Question 107. (Question statement is not printed in the source book; solution given below.)
Solution. At L.H.S.: CH3COOH ⇌ CH3COO− + H+; [H+] = C × α = C√(Ka/C) = √(Ka·C) = √(1.8×10−5 × 0.1) = 1.342×10−3 mol litre−1
At R.H.S.: NH4OH ⇌ NH4+ + OH−; [OH−] = C × α = √(Kb·C) = √(1.8×10−5 × 0.01) = 0.424×10−3 mol litre−1
∴ [H+] = 10−14/(0.424×10−3) = 2.359×10−11 mol litre−1
Note: see chapter 13 of ionic equilibria for dissociation of weak acids and weak bases.
Now for the cell: ½H2 → H+ + e at anode, i.e. L.H.S.; H+ + e → ½H2 at cathode, i.e. R.H.S.
Ecell = EOP,H/H⁺ + ERP,H⁺/H = E°OP − (0.059/1) log {[H+]L.H.S./[PH₂]1/2} + E°RP + (0.059/1) log {[H+]R.H.S./[PH₂]1/2}
= 0.059 log ([H+]R.H.S./[H+]L.H.S.) (since PH₂ = 1 atm on both sides) = 0.059 log (2.359×10−11/1.342×10−3) = −0.4575 volt
Teacher's Note: Concentration cell of hydrogen electrodes: emf = 0.059 × log([H⁺] cathode/[H⁺] anode).
Exam Note: Get [H⁺] on each side first; answer −0.4575 V (polarity reversed).
Question 108. (Question statement is not printed in the source book; solution given below.)
Solution. The cell is demonstrated as: Pt, H2(1 atm) | HA1 || HA1 | (H2)(1 atm) Pt
At L.H.S.: EH/H⁺ = E°OP,H/H⁺ − (0.059/1) log[H+]2; since −log H+ = pH, EH/H⁺ = E°OP + 0.059(pH)2
At R.H.S.: EH⁺/H = E°RP,H⁺/H + 0.059 log[H+]1 = E°RP − 0.059(pH)1
For acid HA1: HA1 ⇌ H+ + A1−; [H+] = C·α = √(Ka·C), so (pH)1 = ½pKa₁ − ½log C
Similarly, (pH)2 = ½pKa₂ − ½log C (C is the same)
Ecell = E°OP,H/H⁺ for II + E°RP,H⁺/H for I = 0.059[½pKa₂ − ½pKa₁] = (0.059/2)[5 − 3] = +0.059 V
Teacher's Note: For two weak acids of equal concentration the emf depends only on ½(pKa2 − pKa1).
Exam Note: pH = ½pKa − ½log C; C cancels; E = +0.059 V.
Question 109. (Question statement is not printed in the source book; solution given below.)
Solution. Use Ag → Ag+ + e; E°OP = −0.799 V; Ag(NH3)2+ + e → Ag + 2NH3; E°RP = ?
∴ Ag(NH3)2+ ⇌ Ag+ + 2NH3 and Ecell = E°cell + (0.059/1) log {[Ag(NH3)2+]/([Ag+][NH3]2)}
Also, Ecell = 0 and E°cell = E°OP,Ag/Ag⁺ + E°RP,Ag(NH₃)₂⁺/Ag = (0.059/1) log KC = 0.059 log (6×10−14) = −0.780 V
∴ E°Ag(NH₃)₂⁺/Ag = −0.780 + 0.799 = +0.019 V
Teacher's Note: Complexation lowers E° of Ag⁺/Ag: E°(complex) = E°(Ag⁺/Ag) + 0.059 log Kd.
Exam Note: KC here is the dissociation constant, 6×10⁻¹⁴; E° = +0.019 V.
Question 110. (Question statement is not printed in the source book; solution given below.)
Solution. Use Co(CN)64− → Co(CN)63− + e; E°OP = +0.83 V; Co³⁺ + e → Co²⁺; E°RP = 1.82 V
Co(CN)64− + Co³⁺ ⇌ Co²⁺ + Co(CN)63−
Ecell = E°cell + (0.059/1) log {[Co³⁺][Co(CN)64−]/([Co²⁺][Co(CN)63−])}, or in terms of Kf: 6CN− + Co²⁺ ⇌ Co(CN)64− (Kf₁) and 6CN− + Co³⁺ ⇌ Co(CN)63− (Kf₂)
∴ Ecell = E°cell + (0.059/1) log (Kf₁/Kf₂)
0 = 0.83 + 1.82 + 0.059 log (1019/Kf₂) (at equilibrium Ecell = 0)
∴ Kf₂/1019 = 8.23×1044, ∴ Kf₂ = 8.23×1063
Teacher's Note: Cyanide binds Co³⁺ far more strongly than Co²⁺, so Kf2 ≫ Kf1 (10¹⁹).
Exam Note: E°cell = 2.65 V; solve log(Kf2/10¹⁹) = 44.9.
Question 111. (Question statement is not printed in the source book; solution given below.)
Solution. Zn → Zn²⁺ + 2e; Zn²⁺ + 2e → Zn
Ecell = E°OP,Zn − (0.059/2) log[Zn²⁺]L.H.S. + E°RP,Zn + (0.059/2) log[Zn²⁺]R.H.S.
0.099 = (0.059/2) log (3.84×10−4/[Zn²⁺]L.H.S.); ∴ [Zn²⁺]L.H.S. = 1.69×10−7
For [Zn(CN)4]2− ⇌ Zn²⁺ + 4CN−: Kinst. = [Zn²⁺][CN−]4/[Zn(CN)42−] = 1.69×10−7 × (2.65×10−3)4/0.45
Kinst. = 1.85×10−17
Teacher's Note: Concentration cell gives free Zn²⁺ on the complex side; plug into the instability expression.
Exam Note: Concentration-cell emf first, then Kinst = 1.85×10⁻¹⁷.
Question 112. (Question statement is not printed in the source book; solution given below.)
Solution. N3+ → N5+ + 2e; E° = −0.94 V; 2N3+ + 2e → 2N2+; E° = 0.99 V
or 3N3+ → 2N2+ + N5+
∴ E°cell = E°OP,HNO₂/NO₃⁻ + E°RP,HNO₂/NO = −0.94 + 0.99 = 0.05 V
Also, E°cell = (0.059/2) log Kc; 0.05 = (0.059/2) log Kc ∴ Kc = 49.53
Teacher's Note: Disproportionation of HNO₂; n = 2 electrons transferred.
Exam Note: Kc = 49.53 from E° = 0.05 V, n = 2.
Question 113. (Question statement is not printed in the source book; solution given below.)
Solution. Given, Au³⁺(aq.) + 3e → Au(s); E°RP = 1.42 V and E°OP = −1.42 V; H+ + e → ½H2; E°RP = 0.0 V and E°OP = 0
More is E°OP, more is the tendency for oxidation; thus in case of the two half reactions: (3/2)H2 → 3H+ + 3e; Au³⁺ + 3e → Au
(3/2)H2 + Au³⁺ → Au + 3H+; E° = E°OP,H + E°RP,Au = 1.42 V
Thus H2 will reduce Au³⁺ to Au (E°cell = +ve) but HCl will not dissolve Au (E°cell = −ve for the reverse reaction).
Teacher's Note: Positive E°cell means spontaneous; Au sits above hydrogen in the series so H⁺ cannot oxidise it.
Exam Note: HCl alone does not dissolve gold: E°cell = −1.42 V.
Question 114. (Question statement is not printed in the source book; solution given below.)
Solution. Cathode: Hg2Br2(s) + 2e → 2Hg(l) + 2Br−(aq.); Anode: 2Ag(s) + 2Br−(aq.) → 2AgBr(s) + 2e
Cell reaction: Hg2Br2(s) + 2Ag(s) → 2Hg(l) + 2AgBr(s)
(∂E/∂T)P = (0.070 − 0.066)/10 = 0.0004
ΔG = −nFE = −2 × 96500 × 0.068 = −13124 J = −13.124 kJ
ΔH = −nF[E − T(∂E/∂T)P] = −2 × 96500[0.068 − 298 × 0.0004] = 9881.6 J = 9.882 kJ
ΔS = nF(∂E/∂T)P = 2 × 96500 × 0.0004 = 77.2 J
Teacher's Note: Temperature coefficient of emf gives ΔS directly: ΔS = nF(∂E/∂T); ΔH then from ΔG + TΔS.
Exam Note: ΔG, ΔH, ΔS: −13.124 kJ, +9.882 kJ, 77.2 J/K.
Question 115. (Question statement is not printed in the source book; solution given below.)
Solution. Cell: ½H2 → H+ + e; H+ + e → ½H2
Ecell = E°OP,H₂/H⁺ − (0.059/1) log[H+] + E°RP,H⁺/H₂ + (0.059/1) log[H+]
−0.188 = 0 + 0 + 0.059 log[H+]; ∴ [H+] = 6.51×10−4 M
Now C6H5NH3+ + H2O ⇌ C6H5NH2 + H3O+
∴ [H+] = c·h, or 6.51×10−4 = (1/32) × h; ∴ h = 2.08×10−2
Also KH = ch² = (1/32) × (2.08×10−2)2 = 1.352×10−5
Teacher's Note: Hydrolysis of the anilinium salt: [H⁺] = c·h, Kh = c·h² with c = 1/32 M.
Exam Note: Emf gives [H⁺]; then h = [H⁺]/c, Kh = ch².
Question 116. (Question statement is not printed in the source book; solution given below.)
Solution. The net reaction for the given change will be 4SO42− + O2 + 4H+ → 2H2O + S2O82−
E°cell = E°OP,SO₄²⁻/S₂O₈²⁻ + E°RP,O₂/H₂O = −2.01 + 1.23 = −0.78 V
Since E°cell is negative and thus oxygen will not oxidise SO42− to S2O82−.
Teacher's Note: Negative E°cell = non-spontaneous; S₂O₈²⁻ is a stronger oxidant than O₂.
Exam Note: Add E°OP of sulphate and E°RP of O₂; −0.78 V, no reaction.
Question 117. (Question statement is not printed in the source book; solution given below.)
Solution. (a) More or +ve is the E°OP, more is the tendency for oxidation. Therefore, since maximum E°OP stands for: Sn²⁺ → Sn⁴⁺ + 2e; E°OP = −0.1 V
∴ Strongest reductant: Sn²⁺ and weakest oxidant: Sn⁴⁺
(b) More or +ve is E°RP, more is the tendency for reduction. Therefore, since maximum E°RP stands for: MnO4− + 8H+ + 5e → Mn²⁺ + 4H2O; E°RP = +1.52 V
∴ Strongest oxidant: MnO4− and weakest reductant: Mn²⁺
Note: stronger is oxidant, weaker is its conjugate reductant and vice-versa.
(c) For (i): E°cell = E°OP,Fe²⁺/Fe³⁺ + E°RP,Sn⁴⁺/Sn²⁺ = −0.77 + 0.1 = −0.67 V; E°cell is negative. Fe³⁺ oxidises and Sn⁴⁺ reduces in change. (i) is a non-spontaneous change.
For (ii): E°cell = E°OP,Fe²⁺/Fe³⁺ + E°RP,I₂/I⁻ = −0.77 + 0.54 = −0.23 V; (ii) is a non-spontaneous change.
For (iii): E°cell = E°OP,I⁻/I₂ + E°RP,Sn⁴⁺/Sn²⁺ = −0.54 + 0.1 = −0.44 V; (iii) is a non-spontaneous change.
For (iv): E°cell = E°OP,Sn²⁺/Sn⁴⁺ + E°RP,I₂/I⁻ = −0.1 + 0.54 = +0.44 V; (iv) is a spontaneous change.
Teacher's Note: Rank by E°OP for reductants, E°RP for oxidants; spontaneity needs E°cell > 0.
Exam Note: Only (iv), Sn²⁺ with I₂, is spontaneous (+0.44 V).
Question 118. (Question statement is not printed in the source book; solution given below.)
Solution. Given, for A: An+ + ne → A, E°RP = −0.76 V; for B: Bn+ + ne → B, E°RP = +0.80 V; for H: H+ + e → ½H2, E°RP = 0
Now coupling A with H2SO4: 2A + nH2SO4 → A2(SO4)n + nH2; E°cell = E°OP,A + E°RP,H = +0.76 + 0.0 = +0.76 V
Since E° is +ve, the reaction 2A + nH2SO4 → A2(SO4)n + nH2 is spontaneous, i.e. A will liberate H2 from H2SO4.
Now coupling B with H2SO4: 2B + nH2SO4 → B2(SO4)n + nH2; E°cell = E°OP,B + E°RP,H = −0.80 + 0 = −0.80 V
Since E° is −ve, the reaction will not occur, i.e. B will not liberate H2 from H2SO4.
Teacher's Note: Metals with negative E°(Mn+/M) displace hydrogen from dilute acids; those with positive E° do not.
Exam Note: Sign of E°cell with H⁺/H₂ decides: A yes, B no.
Single Integer Answer Problems
Question Single Integer 1. The quantity of charge (in Faraday) required to electrolyse 54 g H2O is …
Solution. Answer (from key): Six. 54 g = 3 mol H2O; 2H2O → 2H2 + O2 needs 2 F per mol H2O, so 3 × 2 = 6 F.
Teacher's Note: Each water molecule electrolysed needs two electrons; multiply moles of water by 2.
Exam Note: Moles × 2 faraday; answer 6.
Question Single Integer 2. The quantity of charge (in Faraday) required to reduce 96 g Mg from molten solution of MgCl2 …
Solution. Answer (from key): Eight. 96 g = 4 mol Mg; Mg²⁺ + 2e → Mg, so 4 × 2 = 8 F.
Teacher's Note: Mg²⁺ takes two electrons; charge = moles × 2 F.
Exam Note: Mole of Mg × valency = faradays.
Question Single Integer 3. The quantity of charge (in Faraday) required to liberate 33.6 litre Cl2 from molten NaCl …
Solution. Answer (from key): Three. 33.6 L at STP = 1.5 mol Cl2; 2Cl− → Cl2 + 2e, so 1.5 × 2 = 3 F.
Teacher's Note: Convert gas volume at STP to moles, then two faraday per mole of Cl₂.
Exam Note: 22.4 L per mole; 2 F per mole Cl₂.
Question Single Integer 4. On electrolysis of the solution of CH3COONa(aq.) the volume ratio of gases formed at anode and cathode is …
Solution. Answer (from key): Three. Anode: 2CH3COO− → C2H6 + 2CO2 + 2e (3 volumes of gas); cathode: 2H+ + 2e → H2 (1 volume). Ratio 3 : 1, i.e. 3.
Teacher's Note: Kolbe electrolysis gives ethane plus CO₂ at the anode and hydrogen at the cathode.
Exam Note: Count gas volumes per 2e: 3 : 1.
Question Single Integer 5. On electrolysing the solution of sodium butyrate the mole ratio of gases formed at anode and cathode is …
Solution. Answer (from key): Two. Anode: 2C3H7COO− → C6H14 + 2CO2 + 2e (hexane is a liquid, so only 2 mol CO2 is gas); cathode: 2H+ + 2e → H2 (1 mol). Ratio 2 : 1, i.e. 2.
Teacher's Note: Hexane from butyrate is liquid, so only CO₂ counts as anodic gas.
Exam Note: Liquid hexane is not a gas; ratio 2 : 1.
Question Single Integer 6. In rusting of iron, iron is oxidised and O2 is reduced. The number of electrons used during reduction of O2 are …
Solution. Answer (from key): Four. O2 + 4H+ + 4e → 2H2O.
Teacher's Note: Oxygen in oxidation state 0 goes to −2 in each of two oxygens: 4 electrons.
Exam Note: O₂ takes four electrons.
Question Single Integer 7. E° (in volt) of cell A + B+n → A+n + B if E°An+/A = −2.5 V and EBn+/B = +0.5 V.
Solution. Answer (from key): Three. E°cell = E°RP,cathode − E°RP,anode = 0.5 − (−2.5) = 3.0 V.
Teacher's Note: E°cell is cathode reduction potential minus anode reduction potential; n does not change it.
Exam Note: E° is intensive; 0.5 + 2.5 = 3 V.
Question Single Integer 8. 9650 C charge is passed through an aqueous solution of metal nitrate M(NO3)x to obtain 2 g metal (atomic mass 80). The valence of metal is …
Solution. Answer (from key): Four. 9650 C = 0.1 F, so equivalent mass = 2/0.1 = 20; valence = 80/20 = 4.
Teacher's Note: Equivalent mass = mass deposited per faraday; valence = atomic mass ÷ equivalent mass.
Exam Note: Eq. mass 20; valence 80/20 = 4.
Question Single Integer 9. If −ΔG° is zero for a cell, the equilibrium constant for cell reaction is …
Solution. Answer (from key): One. ΔG° = −RT ln K = 0, so ln K = 0 and K = 1.
Teacher's Note: ΔG° = 0 means standard state is already at equilibrium: K = e⁰.
Exam Note: ΔG° = −RT ln K gives K = 1.
Question Single Integer 10. If E°1, E°2 and E°3 are standard oxidation potentials for Fe | Fe²⁺, Fe²⁺ | Fe³⁺ and Fe | Fe³⁺, then E°3 = (E°2 + 2E°1)/n. The value of n is …
Solution. Answer (from key): Three. Fe → Fe³⁺ + 3e: 3E°3 = 2E°1 + E°2 (adding ΔG° of Fe → Fe²⁺ + 2e and Fe²⁺ → Fe³⁺ + e), so n = 3.
Teacher's Note: Potentials with different electron numbers combine via ΔG°; denominator is total electrons.
Exam Note: Total electrons in overall half-reaction = 3.
Question Single Integer 11. The number of cells which may be constructed with different E°cell values for the reaction: Fe + 2Fe³⁺ → 3Fe²⁺ is …
Solution. Answer (from key): Three. Possible cells: Fe | Fe²⁺ || Fe³⁺ | Fe (E° = 0.404 V, n = 6); Fe | Fe²⁺ || Fe³⁺, Fe²⁺ | Pt (E° = 1.212 V, n = 2); Fe | Fe³⁺ || Fe³⁺, Fe²⁺ | Pt (E° = 0.808 V, n = 3). Each has ΔG° = −2.424 F.
Teacher's Note: Same overall reaction can be split into half-reactions in different ways, giving different E° and n.
Exam Note: Three cells; same ΔG°, different E° and n.
Question Single Integer 12. The concentration (in molarity) of Ni(NO3)2 left after passing 965 ampere current for one second through 2 M Ni(NO3)2 solution using Ni electrode is …
Solution. Answer (from key): Two. With nickel electrodes, Ni dissolves at the anode as much as Ni²⁺ is deposited at the cathode, so the concentration stays 2 M.
Teacher's Note: Active electrodes replace the ions removed; concentration does not change.
Exam Note: Same-metal electrodes: no concentration change.
Question Single Integer 13. The equivalent of metal discharged when 482.5 ampere is passed through its aqueous salt solution for 800 seconds is …
Solution. Answer (from key): Four. Charge = 482.5 × 800 = 386000 C; equivalents = 386000/96500 = 4.
Teacher's Note: Equivalents = i·t/96500.
Exam Note: Q = it = 386000 C; 4 eq.
Question Single Integer 14. E° for a cell having 2 electrons involved in redox change is 0.2655 V. The equilibrium constant for the redox change is 10a. The value of a is …
Solution. Answer (from key): Nine. log K = nE°/0.059 = 2 × 0.2655/0.059 = 9.0, so K = 109.
Teacher's Note: Use log K = nE°/0.059 at 25 °C.
Exam Note: log K = 0.531/0.059 = 9.
Question Single Integer 15. The standard oxidation potential of Ni/Ni²⁺ (Ni²⁺ = 1 M) electrode is 0.236 V. If this is combined with a hydrogen electrode (PH₂ = 1 atm) in acid solution, at what pH will the measured e.m.f. be zero at 25 °C?
Solution. Answer (from key): Four. Ni + 2H+ → Ni²⁺ + H2: E = 0.236 − (0.059/2) log (1/[H+]2) = 0.236 + 0.059 log[H+] = 0, so log[H+] = −4 and pH = 4.
Teacher's Note: Set Nernst emf to zero; the H⁺ term gives 0.059 per pH unit.
Exam Note: E = 0.236 − 0.059 pH = 0 gives pH 4.
Question Single Integer 16. How much of the following element will not discharge at cathode during electrolysis of their salts in aqueous medium: Al, Na, Ba, Cu, Ag, Ni, Cr?
Solution. Answer (from key): Three. Al, Na and Ba (highly electropositive) are not discharged at the cathode from aqueous solution; H+ is reduced instead. Cu, Ag, Ni and Cr are deposited.
Teacher's Note: Metals above hydrogen in reactivity with very negative E° give H₂, not metal, from water.
Exam Note: Count Al, Na, Ba: three.
Question Single Integer 17. Number of Faraday required to show the conversion of one mole of Fe2(SO4)3 to FeSO4.
Solution. Answer (from key): Two. One mole Fe2(SO4)3 has 2 Fe³⁺; 2Fe³⁺ + 2e → 2Fe²⁺, so 2 F.
Teacher's Note: Count Fe atoms times one electron each.
Exam Note: Two Fe³⁺ per mole: 2 F.
Question Single Integer 18. The potential for the reaction O2(g) + 4H+ + 4e → 2H2O (1 atm) is 1.23 V in 0.1 N strong acid solution. If the potential measured in an aqueous solution is 0.994 V, the pH of solution is …
Solution. Answer (from key): Five. E = E° − 0.059 pH. In 0.1 N acid (pH 1): 1.23 = E° − 0.059, so E° = 1.289 V. Then 0.994 = 1.289 − 0.059 pH, giving pH = 5.
Teacher's Note: The 1.23 V is at pH 1, so first get E° before finding the new pH.
Exam Note: Do not take 1.23 V as E°; it is at pH 1.
Question Single Integer 19. Ksp of Cu(OH)2 is 1×10−19. If reduction potential of Cu²⁺/Cu couple is 0.1335 V in a solution and E° for Cu²⁺/Cu is 0.34 V, the pH of solution is …
Solution. Answer (from key): Eight. 0.1335 = 0.34 + (0.059/2) log[Cu²⁺], so log[Cu²⁺] = −7 and [Cu²⁺] = 10−7 M. [OH−]2 = 10−19/10−7 = 10−12, [OH−] = 10−6, pOH = 6, pH = 8.
Teacher's Note: Nernst gives free Cu²⁺; Ksp then gives hydroxide concentration.
Exam Note: Chain: Nernst → [Cu²⁺] → Ksp → pOH → pH.
Question Single Integer 20. A solution of metal salt MAn was electrolysed with a current of 9.65 ampere for 100 minutes. The deposition of metal was 18 g at cathode. If the atomic mass of metal is 120, the value of n is …
Solution. Answer (from key): Four. Q = 9.65 × 6000 = 57900 C = 0.6 F; equivalent mass = 18/0.6 = 30; n = 120/30 = 4.
Teacher's Note: Convert minutes to seconds before using i·t.
Exam Note: 100 min = 6000 s; Eq. mass 30; n = 4.
Question Single Integer 21. Current is passed through a cathode where the reaction is 5e + MnO4− + 8H+ → Mn²⁺ + 4H2O. All the permanganate ions present in 100 mL has been reduced after a current of 15 A is passed for 96.5 sec. The original millimoles of KMnO4 in 100 mL solution were …
Solution. Answer (from key): Three. Q = 15 × 96.5 = 1447.5 C = 0.015 F; moles MnO4− = 0.015/5 = 0.003 mol = 3 millimoles.
Teacher's Note: Divide faradays by 5 electrons per permanganate.
Exam Note: 0.015 F ÷ 5 = 3 mmol.
Question Single Integer 22. A current of 4.825 amperes is passed through Hg2Cl2 solution (atomic mass of Hg2Cl2 = 471) for 1000 second to reduce it completely into Hg. The total mass of Hg deposited in g is …
Solution. Answer (from key): Five (as printed in the key). Corrected: Q = 4.825 × 1000 = 4825 C = 0.05 F. Hg2Cl2 + 2e → 2Hg + 2Cl− gives 1 mol Hg per faraday (Hg is Hg(I)), so 0.05 mol Hg = 0.05 × 200 = 10 g. The printed 5 g is obtained only if Hg is taken as two-electron (equivalent mass 100).
Teacher's Note: Mercury(I) needs one electron per Hg atom; check oxidation state before using equivalent mass.
Exam Note: Hg(I): 1 F per mole Hg; answer 10 g.
Question Single Integer 23. An impure silver anode of 20 g and 50.8% purity made anode in refining of silver by electrolytic method. If a current of 193 ampere is passed for 10 sec, the mass of pure Ag (atomic mass 108) left at anode is …
Solution. Answer (from key): Eight. Ag in anode = 0.508 × 20 = 10.16 g. Q = 1930 C = 0.02 F, so 0.02 × 108 = 2.16 g Ag dissolves. Left = 10.16 − 2.16 = 8.0 g.
Teacher's Note: Silver in the impure anode dissolves; subtract the charge-equivalent mass from the pure silver present.
Exam Note: Initial pure Ag minus Faraday-dissolved Ag.
Question Single Integer 24. The mole ratio of gases evolved at cathode and anode during electrolysis of H2SO4 using Pt electrodes is …
Solution. Answer (from key): Two. Cathode: 2H+ + 2e → H2; anode: 2H2O → O2 + 4H+ + 4e. Per 4e: 2 mol H2 to 1 mol O2, ratio 2 : 1.
Teacher's Note: Electrolysis of dilute H₂SO₄ is electrolysis of water: H₂ and O₂ in 2 : 1.
Exam Note: Ratio H₂ : O₂ = 2 : 1.
Question Single Integer 25. 3 ampere current was passed through an aqueous solution of an unknown salt AXn for an hour. 2.977 g of A was deposited at cathode. If the atomic mass of A is 106.4, what is the value of n?
Solution. Answer (from key): Four. Q = 3 × 3600 = 10800 C = 0.1119 F; equivalent mass = 2.977/0.1119 = 26.6; n = 106.4/26.6 = 4.
Teacher's Note: Valency of the metal equals atomic mass ÷ equivalent mass.
Exam Note: Eq. mass 26.6; n = 4.
Question Single Integer 26. A cell was prepared by using of a M ZnSO4 and b M CuSO4. Another cell was prepared with a M ZnSO4 and 0.5 M CuSO4 and this time emf of this cell was lower than 0.03 V than the previous one. The value of b is …
Solution. Answer (from key): Five. E1 = E° + (0.059/2) log(b/a); E2 = E° + (0.059/2) log(0.5/a). E1 − E2 = 0.0295 log(b/0.5) = 0.03 ≈ 0.0295, so log(b/0.5) = 1, b = 5.
Teacher's Note: Emf difference depends only on the ratio of the two Cu²⁺ concentrations.
Exam Note: Difference 0.03 V ≈ 0.0295 × log 10.
Question Single Integer 27. The standard oxidation potential of Ni/Ni²⁺ electrode is 0.236 V. If this is connected with a hydrogen electrode in acid solution, at what pH of the solution will the measured emf be zero at 25 °C. Assume [Ni²⁺] = 1 M and PH₂ = 1 atm.
Solution. Answer (from key): Four. E = 0.236 + 0.059 log[H+] = 0, so [H+] = 10−4 M and pH = 4 (same as problem 15).
Teacher's Note: Same data and method as problem 15: zero emf at pH 4.
Exam Note: E = 0.236 − 0.059 pH = 0 gives pH 4.
Question Single Integer 28. For a redox cell Hg(l) | Solution A | | Solution B | Hg(l). Solution A contains 0.263 g/litre mercury(I) nitrate and solution B contains 2.63 g/litre mercury(I) nitrate. If the measured emf is 0.0289 V at 18 °C, what is the value of n?
Solution. Answer (from key): Two. Concentration ratio B : A = 10. E = (2.303RT/nF) log 10 = 0.0577/n (at 291 K, 2.303RT/F ≈ 0.0578), so 0.0289 = 0.0578/n and n = 2 (Hg22+).
Teacher's Note: Concentration cell emf is (2.303RT/nF) log(ratio); ratio 10 gives log = 1.
Exam Note: 0.0578/0.0289 = 2 electrons.
Question Single Integer 29. How many faraday of charge is required to completely oxidise one mole of Fe2(C2O4)3?
Solution. Answer (from key): Six. Fe³⁺ cannot be oxidised further; each of the 3 oxalate ions loses 2e (C2O42− → 2CO2 + 2e), so 3 × 2 = 6 F.
Teacher's Note: Only oxalate is oxidisable here; iron is already Fe³⁺.
Exam Note: 3 oxalates × 2 electrons = 6 F.
Question Single Integer 30. ERP for M(x+n)+ + ne → Mx+ are 0.115 V and 0.101 V respectively, when percentage of reduced form is 25 and 50 respectively. What is the value of n?
Solution. Answer (from key): Two. E = E° + (0.059/n) log([oxidised]/[reduced]). At 25% reduced: 0.115 = E° + (0.059/n) log 3. At 50%: 0.101 = E° + 0. Subtracting: 0.014 = (0.059/n)(0.477), n = 2.
Teacher's Note: At 50% reduced the log term vanishes and E equals E°.
Exam Note: Subtract the two Nernst equations; n ≈ 2.
Question Single Integer 31. Total charge (in coulomb) required for the oxidation of ½ mole Mn3O4 into MnO42− is …
Solution. Answer (from key): Five (that is, 5 faraday = 4.825 × 105 C, so the key's five is in units of 105 C). Mn3O4 (average Mn +8/3) → 3MnO42− (Mn +6): 3 × 6 − 8 = 10 e per mole, so ½ mol needs 5 F.
Teacher's Note: Total oxidation-number change over all three Mn gives electrons per formula unit.
Exam Note: Charge = 5 F = 4.825×10⁵ C.
Question Single Integer 32. A molten salt of InClx on electrolysis using 3.20 A current for a period of 40 minute leads to the formation of 3.05 g In. If atomic mass of In is 114.8, the value of x is …
Solution. Answer (from key): Three. Q = 3.20 × 2400 = 7680 C = 0.0796 F; equivalent mass = 3.05/0.0796 = 38.3; x = 114.8/38.3 = 3.
Teacher's Note: Minutes to seconds first; then equivalent mass gives the valency.
Exam Note: Eq. mass 38.3; x = 3.
Question Single Integer 33. A cell having two H-electrodes. The negative electrode present in acid solutions is in contact with H+ ion having pH = 6. What should be the pH of other electrode so that cell may deliver an emf of 0.118 V at 25 °C.
Solution. Answer (from key): Four. Negative electrode = anode: Ecell = 0.059 (pHanode − pHcathode) = 0.118, so 6 − pHcathode = 2 and pHcathode = 4.
Teacher's Note: In a hydrogen concentration cell the more acidic side is the cathode.
Exam Note: E = 0.059 × ΔpH; ΔpH = 2.
Question Single Integer 34. A source of light of 100 V will produce 6 kJ energy if 10 ampere current is passed for t sec. The value of t is …
Solution. Answer (from key): Six. Energy = V·i·t: 6000 = 100 × 10 × t, so t = 6 s.
Teacher's Note: Electrical energy is volts × amperes × seconds.
Exam Note: E = Vit; t = 6000/1000.
Question Single Integer 35. 4 M solution of AgNO3 is electrolysed using Ag electrode. A current of 3 ampere is passed for 9.65 × 103 sec. The molarity of solution after electrolysis is …
Solution. Answer (from key): Four. With silver electrodes, Ag dissolves at the anode as fast as Ag+ is deposited at the cathode, so the concentration stays 4 M.
Teacher's Note: Active silver anode replenishes Ag⁺; no net change.
Exam Note: Same-metal electrodes: molarity unchanged.
Question Single Integer 36. 4 M NiSO4 solution is electrolysed by passing 3 ampere current for 9.65 × 103 sec using Pt electrodes. The equivalent of gas formed at anode are …
Solution. Answer (from key): Three (key value; it stands for 3 × 10−1 eq). Q = 3 × 9650 = 28950 C = 0.3 F, so 0.3 equivalent of O2 forms at the anode.
Teacher's Note: Equivalents of gas at one electrode equal faradays passed.
Exam Note: 0.3 eq (key writes 3, i.e. ×10⁻¹).
Question Single Integer 37. An electrolysis of oxytungsten complex ion using 1.10 A for 40 minute produces 0.838 g tungsten. If atomic mass of tungsten is 184, the charge on tungsten in complex is …
Solution. Answer (from key): Six. Q = 1.10 × 2400 = 2640 C = 0.02736 F; equivalent mass = 0.838/0.02736 = 30.6; charge = 184/30.6 = 6.
Teacher's Note: Charge on metal ion equals atomic mass divided by equivalent mass.
Exam Note: Eq. mass 30.6; oxidation state +6.
Question Single Integer 38. The charge required to deposit all Al from the electrolysis of 1 mol molten Al2O3 is …
Solution. Answer (from key): Six (faraday). 1 mol Al2O3 gives 2 mol Al; Al³⁺ + 3e → Al, so 2 × 3 = 6 F.
Teacher's Note: Count aluminium atoms in the formula and multiply by 3.
Exam Note: 2 Al × 3e = 6 F.
Question Single Integer 39. The oxidation potential of a hydrogen electrode is 0.531 V. If PH₂ = 1 atm, the pH of solution will be …
Solution. Answer (from key): Nine. EOP = 0 − 0.059 log[H+] = 0.059 pH = 0.531, so pH = 9.
Teacher's Note: Oxidation potential of H₂ electrode is +0.059 × pH.
Exam Note: 0.531/0.059 = 9.
Question Single Integer 40. The emf of cell Pt | Q, H2Q, H+ || 1 M HCl | Hg2Cl2(s) | Hg(l) Pt is −0.065 V. If E°RP of Quinhydrone electrode and standard calomel electrode are 0.699 and 0.280 V respectively, the pH of left hand compartment is …
Solution. Answer (from key): Six. Ecell = EOP,quinhydrone + ERP,calomel = −(0.699 − 0.059 pH) + 0.280 = −0.419 + 0.059 pH = −0.065, so pH = 6.
Teacher's Note: Quinhydrone is the anode here, so use its oxidation potential.
Exam Note: Left electrode is anode: write −0.699 + 0.059 pH.
Question Single Integer 41. A current of 2 A is passed for 5 hour through a molten metal salt, deposits 22.2 g of metal having atomic mass 177. The oxidation state of metal in salt is …
Solution. Answer (from key): Three. Q = 2 × 18000 = 36000 C = 0.373 F; equivalent mass = 22.2/0.373 = 59.5; oxidation state = 177/59.5 ≈ 3.
Teacher's Note: Convert 5 h to seconds; valency is nearest integer of atomic mass over equivalent mass.
Exam Note: Eq. mass ≈ 59; state +3.
Objective Problems (One Answer Correct)
Question Objective 1. E° for Cr³⁺ + 3e → Cr and Cr³⁺ + e → Cr²⁺ are −0.74 V and −0.40 V respectively. E° for Cr²⁺ + 2e → Cr is: (a) −0.91 V (b) +0.91 V (c) −1.14 V (d) +0.34 V
Solution. Answer: (a). Cr³⁺ + 3e → Cr: −ΔG°1 = 3 × (−0.74)F; Cr³⁺ + e → Cr²⁺: −ΔG°2 = 1 × (−0.40)F. Subtracting, Cr²⁺ + 2e → Cr: 2E°F = [3(−0.74) − (−0.40)]F = −1.82F, so E° = −0.91 V (the book writes the magnitude 0.91 V).
Teacher's Note: Different electron numbers: subtract ΔG° values and divide by electrons of the target half-reaction.
Exam Note: Use ΔG° = −nE°F; answer −0.91 V.
Question Objective 2. A cell is to be constructed to show a redox change: Cr + 2Cr³⁺ ⇌ 3Cr²⁺. The number of cells with different E° and 'n' but same value of ΔG° can be made: (Given, E°Cr³⁺/Cr²⁺ = −0.40 V, E°Cr²⁺/Cr = −0.74 V, E°Cr³⁺/Cr = −0.91 V) (a) 1 (b) 2 (c) 3 (d) 4
Solution. Answer: (c). Three cells: (I) Cr | Cr³⁺ || Cr³⁺, Cr²⁺ | Pt: E° = 0.74 − 0.4 = 0.34 V, n = 3, −ΔG° = 3 × 0.34F = 1.02F. (II) Cr | Cr²⁺ ... 3Cr → 3Cr²⁺ + 6e with 2Cr³⁺ + 6e → 2Cr: E° = 0.91 − 0.74 = 0.17 V, n = 6, −ΔG° = 1.02F. (III) Cr → Cr²⁺ + 2e with 2Cr³⁺ + 2e → 2Cr²⁺: E° = 0.91 − 0.40 = 0.51 V, n = 2, −ΔG° = 1.02F.
Teacher's Note: Each way of splitting the overall reaction into half-reactions gives a different n and E° with the same ΔG°.
Exam Note: Three splits: n = 3, 6, 2; same ΔG°.
Question Objective 3. The solubility product of Pb3(AsO4)2 is 4.1×10−36. The E° for the reaction: Pb3(AsO4)2(s) + 6e ⇌ 3Pb(s) + 2AsO43− if E°Pb²⁺/Pb = −0.13 V: (a) +0.478 V (b) −0.13 V (c) −0.478 V (d) +0.13 V
Solution. Answer: (c). E° = E°Pb²⁺/Pb + (0.059/6) log Ksp = −0.13 + (0.059/6) log(4.1×10−36) = −0.13 − 0.348 = −0.478 V.
Teacher's Note: A sparingly soluble salt lowers E° by (0.059/n) × |log Ksp|.
Exam Note: n = 6 and log Ksp = −35.4: −0.478 V.
Question Objective 4. Calculate the E° for the reaction ZnY²⁻ + 2e ⇌ Zn(s) + Y⁴⁻, where Y⁴⁻ is the completely deprotonated anion of EDTA. The formation constant for ZnY²⁻ is 3.2×1016 and E° for Zn → Zn²⁺ + 2e is 0.76 V: (a) −1.25 V (b) 0.48 V (c) +0.68 V (d) −0.27 V
Solution. Answer: (a). E°ZnY²⁻/Zn = E°Zn²⁺/Zn + (0.059/2) log Kd, with Kd = 1/Kf: = −0.76 + (0.059/2) log(1/3.2×1016) = −0.76 − 0.487 = −1.25 V.
Teacher's Note: Complex formation stabilises Zn²⁺, so the reduction potential falls by (0.059/2) log Kf.
Exam Note: E° = −0.76 − 0.0295 log Kf = −1.25 V.
Question Objective 5. If Fe³⁺ + Y⁴⁻ ⇌ FeY⁻; Kf = 1.3×1025; Fe²⁺ + Y⁴⁻ ⇌ FeY²⁻; Kf = 2.1×1014 and Fe³⁺ + e → Fe²⁺; E° = +0.77 V. The E° for FeY⁻ + e → FeY²⁻ is: (a) 0.13 V (b) −0.636 V (c) +0.636 V (d) 1.41 V
Solution. Answer: (a). E°FeY⁻/FeY²⁻ = E°Fe³⁺/Fe²⁺ + 0.059 log([FeY²⁻][Fe³⁺]/([FeY⁻][Fe²⁺])) = 0.77 + 0.059 log(2.1×1014/1.3×1025) = 0.77 − 0.64 = +0.13 V.
Teacher's Note: Fe³⁺ is bound far more strongly than Fe²⁺, so the complexed couple is a weaker oxidant.
Exam Note: E° = 0.77 + 0.059 log(Kf2/Kf1).
Question Objective 6. A constant current was passed through a solution of AuCl4− ion between gold electrodes. After a period of 10.0 minute the increase in mass of cathode was 1.314 g. The total charge passed through solution is: (atomic mass of AuCl4− = 339) (a) 1.16×10−2 F (b) 3.5×10−2 F (c) 2×10−2 F (d) 4×10−3 F
Solution. Answer: (c). Au³⁺ + 3e → Au: w/(197/3) = Q/96500, so Q = 1.314 × 3/197 = 0.02 F.
Teacher's Note: Gold(III) needs three electrons; equivalent mass is 197/3.
Exam Note: Au³⁺ valency 3; charge 0.02 F.
Question Objective 7. Efficiency of a fuel cell is 80% and the standard heat of reaction is −300 kJ. The reaction involves two electrons in redox change. The E° for the fuel cell is: (a) 1.24 V (b) 2.48 V (c) 0 V (d) 0.62 V
Solution. Answer: (a). Efficiency = ΔG°/ΔH° = nE°F/(−ΔH°) = 0.80, so E° = 0.80 × 300 × 10³/(2 × 96500) = 1.24 V.
Teacher's Note: Efficiency compares electrical work (ΔG) to heat of reaction (ΔH).
Exam Note: η = nFE°/|ΔH|; E° = 1.24 V.
Question Objective 8. The Ecell for a given cell is 1.2346 and 1.2340 V at 300 and 310 K respectively. Calculate the change in entropy during the cell reaction if the redox change involves three electrons: (a) −17.37 JK⁻¹ (b) +17.37 JK⁻¹ (c) 173.7 JK⁻¹ (d) 5.79 JK⁻¹
Solution. Answer: (a). ΔS = nF(∂E/∂T)P = 3 × 96500 × (1.2340 − 1.2346)/10 = 3 × 96500 × (−6×10−5) = −17.37 J K⁻¹.
Teacher's Note: Entropy change follows the sign of the temperature coefficient of emf.
Exam Note: ΔS = nF(ΔE/ΔT); emf falls, so ΔS is negative.
Question Objective 9. A current of 3 ampere was passed for 1 hour through an electrolyte solution of AxBy in water. If 2.977 g of A (atomic mass 106.4) was deposited at cathode and B was a monovalent ion, the formula of electrolyte was: (a) AB2 (b) AB (c) AB3 (d) AB4
Solution. Answer: (d). w/E = it/96500: 2.977/(106.4/Y) = 3 × 3600/96500, giving Y = 4; the electrolyte is AB4.
Teacher's Note: Valency of A decides how many monovalent B ions pair with it.
Exam Note: Y = 4, so formula AB₄.
Question Objective 10. The E° for Cu²⁺/Cu⁺, Cu⁺/Cu, Cu²⁺/Cu are 0.15 V, 0.50 V and 0.325 V respectively. The redox reaction showing redox change 2Cu⁺ → Cu²⁺ + Cu is made. The E° of this cell reaction and ΔG° may be: (a) E° = 0.175 V or E° = 0.350 V (b) n = 2 or 1 respectively (c) ΔG° = −33.775 kJ (d) all of the above
Solution. Answer: (d). Cell I (n = 1): Cu⁺ → Cu²⁺ + e (−0.15 V) with Cu⁺ + e → Cu (0.50 V): E° = +0.35 V. Cell II (n = 2): Cu → Cu²⁺ + 2e (−0.325 V) with 2Cu⁺ + 2e → 2Cu (0.50 V): E° = +0.175 V. ΔG° = −2 × 0.175 × 96500 = −33775 J.
Teacher's Note: Same reaction written with n = 1 or 2 gives different E° but equal ΔG°.
Exam Note: ΔG° = −33.775 kJ either way.
Question Objective 11. Total charge required to convert three mole of Mn3O4 to MnO42− in presence of alkaline medium: (a) 10 F (b) 20 F (c) 30 F (d) 40 F
Solution. Answer: (c). (Mn+8/3)3 → 3Mn6+ + 10e, so 1 mol Mn3O4 needs 10 F and 3 mol need 30 F.
Teacher's Note: Net oxidation-number change over three Mn atoms is 18 − 8 = 10.
Exam Note: 10 F per mole; three moles 30 F.
Question Objective 12. A current of 965 ampere is passed for 1 sec through 1 litre solution of 0.02 N NiSO4 using Ni electrodes. What is the new concentration of NiSO4? (a) 0.01 N (b) 0.01 M (c) 0.002 M (d) 0.02 M
Solution. Answer: (b). w/E = 965 × 1/96500 = 0.01 eq. Equivalent of NiSO4 initially = 1 × 0.02 = 0.02. With Ni electrodes there is no change in concentration of NiSO4, i.e. 0.02 N = 0.01 M. (With Pt electrodes 0.01 eq would be left.)
Teacher's Note: Ni anode dissolves as much as is deposited, so normality stays 0.02 N, i.e. 0.01 M.
Exam Note: N = 2 × M for Ni²⁺; 0.02 N = 0.01 M.
Question Objective 13. For the given cell PtD₂/D⁺ || H⁺ | PtH₂ if E°D₂/D⁺ = 0.003 V, what will be ratio of D⁺ and H⁺ at 25 °C when the reaction: D2 + 2H⁺ → 2D⁺ + H2 attains equilibrium: (a) 1.34 (b) 1.24 (c) 1.124 (d) 1.45
Solution. Answer: (c). Ecell = EOP,D₂ + ERP,H⁺/H₂ = 0.003 − (0.059/2) log([D⁺]2/[H⁺]2) (E°RP,H⁺/H₂ = 0). At equilibrium Ecell = 0: log([D⁺]/[H⁺]) = 0.003/0.059 = 0.0508, so [D⁺]/[H⁺] = 1.124.
Teacher's Note: At equilibrium emf is zero; the 0.003 V E° sets the concentration ratio.
Exam Note: log ratio = 0.003/0.059 gives 1.124.
Question Objective 14. What is E°RP for the reaction Cu²⁺ + 2e → Cu in the half cell PtS²⁻/CuS/Cu if E°Cu²⁺/Cu is 0.34 V and Ksp of CuS = 10−35? (a) 0.34 V (b) −0.6925 V (c) +0.6925 V (d) −0.66 V
Solution. Answer: (b). E°S²⁻/CuS/Cu = E°Cu²⁺/Cu + (0.059/2) log Ksp = 0.34 + 0.0295 × (−35) = −0.6925 V.
Teacher's Note: Insoluble CuS makes Cu²⁺ nearly absent, shifting E° far negative.
Exam Note: E = 0.34 + 0.0295 log 10⁻³⁵.
Question Objective 15. The combustion of butane in O2 at 1 bar and 298 K shows a decrease in free energy equal to 2.75×103 kJ mol⁻¹ in a fuel cell. K and E° of fuel cell are: (a) 9.55×10482, 1.096 V (b) 9.55, 1.096 V (c) 1.023×10966, 2.85 V (d) 5.5×10484, 0.55 V
Solution. Answer: (a). C4H10 + (13/2)O2 → 4CO2 + 5H2O involves n = 26 (C−5/2)4 → 4C4+ + 26e. −ΔG° = nE°F: E° = 2.75×106/(26 × 96500) = 1.096 V. E° = (0.059/n) log Kp: 1.096 = (0.059/26) log Kp, K = 9.55×10482.
Teacher's Note: Get n from carbon oxidation numbers: each C goes from −5/2 to +4, total 26 electrons.
Exam Note: n = 26; E° = 1.096 V.
Question Objective 16. A half cell reaction: Ag2S(s) + 2e → 2Ag(s) + S²⁻ is carried out in a half cell PtAg₂S/Ag, H₂S (0.1 M) at [H⁺] = 10−3. The emf of a half cell is: [if E°Ag⁺/Ag = 0.80 V, Ka of H2S = 10−21 and Ksp of Ag2S = 10−49] (a) −0.1735 V (b) −0.19 V (c) +0.1735 (d) +0.19 V
Solution. Answer: (a). Ka = [H⁺]2[S²⁻]/[H2S] = (10−3)2[S²⁻]/0.1, so [S²⁻] = 10−16. [Ag⁺] = √(Ksp/[S²⁻]) = √(10−49/10−16) = √10−33. E = 0.80 + (0.059/2) log [Ag⁺]2 = 0.80 + (0.059/2) log 10−33 = −0.1735 V.
Teacher's Note: First find [S²⁻] from H₂S acid equilibrium, then [Ag⁺] from Ksp, then Nernst.
Exam Note: Chain: Ka → [S²⁻] → Ksp → [Ag⁺] → E.
Question Objective 17. Which one is not correct if electrolysis of CH3COONa(aq.) is made using Pt electrodes? (a) pH of solution increases (b) Molar ratio of gases at anode and cathode is 3 : 1 (c) [CH3COO⁻] in solution decreases (d) The molar ratio of gases at anode and cathode is 2 : 1
Solution. Answer: (d). Anode: 2CH3COO⁻ → C2H6 + 2CO2 + 2e (3 mol gas); cathode: 2H⁺ + 2e → H2 (1 mol). The ratio is 3 : 1, so 2 : 1 is incorrect.
Teacher's Note: Kolbe electrolysis: three moles of gas at anode for one of hydrogen at cathode.
Exam Note: Ratio is 3 : 1, not 2 : 1.
Question Objective 18. The calomel electrode and Quinhydrone electrodes are reversible with respect to which ions respectively: (a) Cl⁻, H⁺ (b) H⁺, Cl⁻ (c) Hg22+, OH⁻ (d) Hg22+, OH⁺
Solution. Answer: (a). Calomel electrode is reversible to Cl⁻ ions; quinhydrone electrode is reversible to H⁺ ions (its potential depends on pH).
Teacher's Note: Calomel potential depends on [Cl⁻]; quinhydrone on [H⁺].
Exam Note: Calomel: Cl⁻; quinhydrone: H⁺.
Question Objective 19. EMF of Ni-Cad battery is dependent of: (a) Cd(OH)2 (b) Ni(OH)2 (c) OH⁻ (d) none of these
Solution. Answer: (d). NiO2(s) + Cd + 2H2O → Ni(OH)2(s) + Cd(OH)2(s). Only pure solids and water appear in the net change, so the emf does not depend on any concentration.
Teacher's Note: Net reaction has only solids and water, so Q has no variable concentration.
Exam Note: No ions in net reaction: emf constant.
Question Objective 20. The electrode with reaction: Cr2O72−(aq.) + 14H+(aq.) + 6e → 2Cr3+(aq.) + 7H2O can be represented as: (a) Pt | H⁺, Cr2O72− (b) Pt | H⁺, Cr2O72−, Cr3+ (c) PtH₂ | H⁺, Cr2O72− (d) PtH₂ | H⁺, Cr2O72−, Cr3+
Solution. Answer: (d) as printed in the key ('Follow text'). Corrected: the redox electrode is an inert Pt wire dipping in a solution containing H⁺, Cr2O72− and Cr3+, i.e. option (b) Pt | H⁺, Cr2O72−, Cr3+. The subscripted H2 on Pt in (c) and (d) would denote a hydrogen electrode, which is not part of this half-cell.
Teacher's Note: Write a redox electrode as inert Pt plus every species in the half-reaction, oxidised and reduced.
Exam Note: Both Cr₂O₇²⁻ and Cr³⁺ must appear.
Question Objective 21. For a given reaction: M(X+n) + ne → MX+, E°RP is known along with MX+n and MX+ ion concentrations, then: (a) n can be evaluated (b) X can be evaluated (c) (X + n) can be evaluated (d) n, X, (X + n) can be evaluated
Solution. Answer: (a). ERP = E°RP + (0.059/n) log([MX+n]/[MX+]); with E, E° and concentrations known, n can be found. X cannot be found since it does not appear in the expression.
Teacher's Note: Charge numbers appear only through the electron count n in the Nernst factor.
Exam Note: Only n appears in Nernst; X does not.
Question Objective 22. A dilute aqueous solution of Na2SO4 is electrolysed using platinum electrodes. The products at the anode and cathode are: (a) O2, H2 (b) S2O82−, Na (c) O2, Na (d) S2O82−, H2
Solution. Answer: (a). Anode: 2OH⁻ → H2O + ½O2 + 2e. Cathode: 2H⁺ (from water) + 2e → H2. Dilute Na2SO4 gives O2 and H2.
Teacher's Note: In dilute sulphate solution water is oxidised and reduced; Na⁺ and SO₄²⁻ stay in solution.
Exam Note: Dilute Na₂SO₄ electrolysis: O₂ at anode, H₂ at cathode.
Question Objective 23. A standard hydrogen electrode has zero electrode potential because: (a) hydrogen is easiest to oxidise (b) this electrode potential is assumed to be zero (c) hydrogen atom has only one electron (d) hydrogen is the lightest element
Solution. Answer: (b). It is a fact that the potential of the standard hydrogen electrode is arbitrarily assumed to be zero as the reference.
Teacher's Note: Electrode potentials are relative; the SHE is the chosen zero.
Exam Note: Zero is by convention, not property.
Question Objective 24. The standard reduction potentials of Cu²⁺/Cu and Cu²⁺/Cu⁺ are 0.339 V and 0.153 V respectively. The standard electrode potential of Cu⁺/Cu half cell is: (a) 0.525 V (b) 0.827 V (c) 0.184 V (d) 0.490 V
Solution. Answer: (a). Cu²⁺ + 2e → Cu (−ΔG°1); Cu²⁺ + e → Cu⁺ (−ΔG°2). Subtracting: Cu⁺ + e → Cu, −ΔG°3 = −ΔG°1 + ΔG°2, so E°3 = (2 × 0.339 − 1 × 0.153)/1 = 0.525 V.
Teacher's Note: Combine free energies, not potentials, when electrons differ.
Exam Note: E° = (2×0.339 − 0.153)/1 = 0.525 V.
Question Objective 25. The standard reduction potential values of three metallic cations X, Y and Z are 0.52, −3.03 and −1.18 V respectively. The order of reducing power of the corresponding metals is: (a) Y > Z > X (b) X > Y > Z (c) Z > Y > X (d) Z > X > Y
Solution. Answer: (a). The more negative the reduction potential, the stronger the reducing power of the metal. Oxidising power of cations is X⁺ > Z⁺ > Y⁺, hence reducing power is Y > Z > X.
Teacher's Note: Lower reduction potential of the cation means the metal is a better reductant.
Exam Note: Rank by most negative E°: Y, Z, X.
Question Objective 26. A gas X at 1 atm is bubbled through a solution containing a mixture of 1 M Y⁻ and 1 M Z⁻ at 25 °C. If the reduction potential of Z > Y > X, then: (a) Y will oxidise X and not Z (b) Y will oxidise Z and not X (c) Y will oxidise both X and Z (d) Y will reduce both X and Z
Solution. Answer: (a), as printed. E°RP,Z/Z⁻ > E°RP,Y/Y⁻ > E°RP,X/X⁻. Thus the order of oxidising power is Z > Y > X: Y is a stronger oxidant than X (so Y oxidises X) but weaker than Z (so Y does not oxidise Z).
Teacher's Note: A species oxidises only those partners whose reduction potential is lower than its own.
Exam Note: Higher E°RP oxidises lower E°RP couples.
Question Objective 27. Select the incorrect statement: (a) The electrolysis of molten CaH2 liberates H2 at cathode. (b) During discharge of lead storage battery, sulphuric acid is consumed. (c) Sulphur acts as polymerising agent in vulcanisation of rubber. (d) Galvanisation of iron denotes coating with Zn.
Solution. Answer: (a). In molten CaH2, hydrogen is present as H⁻: 2H⁻ → H2 + 2e, so H2 is liberated at the anode (hydrogen is −ve in ionic hydrides), not the cathode.
Teacher's Note: Hydride ion is negative, so it moves to and is oxidised at the anode.
Exam Note: Hydrogen appears at anode in ionic hydrides.
Question Objective 28. Select the correct statement: (a) Faraday represents 96500 coulomb per sec. (b) Coulomb represents one ampere for 1/2 sec. (c) Coulomb represents 1/2 ampere for 1 sec. (d) Coulomb represents charge of one mole electron.
Solution. Answer: (d), as printed in the key. F = N × e: 96500 = 6.023×1023 × e, so e = 1.602×10−19 C. (Strictly, it is the faraday, 96500 C, that is the charge of one mole of electrons; a coulomb is one ampere for one second.)
Teacher's Note: The faraday is charge per mole of electrons; the coulomb is one ampere-second.
Exam Note: 1 F = 96500 C = charge of 1 mol e⁻.
Question Objective 29. E°RP for the reaction TeO32−(1 M)(aq) + 3H2O(l) + 4e → Te(s) + 6OH⁻(aq) is −0.57 V. Calculate the potential of pH = 12. (a) −0.17 V (b) −0.21 V (c) −0.39 V (d) −0.747 V
Solution. Answer: (c). pH = 12, so [OH⁻] = 10−2. ERP = E°RP + (0.059/4) log([TeO32−]/[OH⁻]6) = −0.57 + (0.059/4) log(1/(10−2)6) = −0.393 V.
Teacher's Note: Here OH⁻ is a product, so it sits in the denominator of the Nernst quotient.
Exam Note: Q = 1/[OH⁻]⁶ = 10¹²; E = −0.393 V.
Question Objective 30. Calculate Ecell for Cr | Cr³⁺(0.04 M) || Cr³⁺(1 M) | Cr: (a) 0.028 V (b) 0.083 V (c) 0 V (d) 0.125 V
Solution. Answer: (a). E = (0.059/3) log([Cr³⁺]R.H.S./[Cr³⁺]L.H.S.) = (0.059/3) log(1/0.04) = 0.028 V.
Teacher's Note: Concentration cell: emf = (0.059/n) log(ccathode/canode) with n = 3.
Exam Note: n = 3; log 25 = 1.4; E = 0.028 V.
Question Objective 31. Given that Ksp of CuS = 10−35 and E°Cu/Cu²⁺ = −0.34 V. The standard oxidation potential of Cu | CuS | S²⁻ half cell is …… (a) 1.0 V (b) 0.693 V (c) −0.690 V (d) −1.0 V
Solution. Answer: (b). Cu(s) + S²⁻ → CuS + 2e. E°Cu|CuS|S²⁻ = E°Cu|Cu²⁺ − (0.059/2) log Ksp = −0.34 − 0.0295 × (−35) = −0.34 + 1.0325 = 0.693 V.
Teacher's Note: Insoluble sulphide makes copper easier to oxidise, raising oxidation potential.
Exam Note: E°OP = −0.34 + 1.0325 = 0.693 V.
Question Objective 32. The temperature coefficient of a given cell, (∂E/∂T)P is 1.5×10−4 V K⁻¹ at 300 K. The change in entropy of cell during the course of reaction, Pb(s) + HgCl2(aq) → PbCl2(aq) + Hg(l) is: (a) 28.95 J/K (b) 14.47 J/K (c) 57.9 J/K (d) 21.70 J/K
Solution. Answer: (a). (∂E/∂T)P = ΔS/nF, so ΔS = 2 × 96500 × 1.5×10−4 = 28.95 J K⁻¹ (n = 2: Pb → Pb²⁺ + 2e).
Teacher's Note: Two electrons are transferred in Pb + Hg²⁺.
Exam Note: ΔS = nF(∂E/∂T), n = 2.
Question Objective 33. If E°ClO₃⁻/ClO₄⁻ = −0.36 V and E°ClO₃⁻/ClO₂⁻ = 0.33 V at 300 K. The equilibrium concentration of perchlorate ion (ClO4−) which was initially 1.0 M in ClO3− when the reaction starts to attain the equilibrium, 2ClO3− ⇌ ClO4− + ClO2−: (a) 0.0236 M (b) 0.0190 M (c) 0.123 M (d) 0.40 M
Solution. Answer printed in the key: (d) 0.40 M. Setup: ClO3− → ClO4− + 2e and ClO3− + 2e → ClO2−; at equilibrium [ClO3−] = 1 − 2x, [ClO4−] = [ClO2−] = x. E°cell = −0.36 + 0.33 = −0.03 V; 0 = −0.03 + (0.059/2) log((1−2x)2/x2) = −0.03 + 0.059 log((1−2x)/x). Corrected: log((1−2x)/x) = 0.508, (1−2x)/x = 3.22, so x = 1/5.22 = 0.19 M. The printed 0.40 M comes from setting (1−2x)/x = 0.509 without taking the antilog. None of the printed options equals 0.19 M; this item needs a human check.
Teacher's Note: Equilibrium emf is zero; solve the Nernst equation, remembering to take the antilog of 0.508.
Exam Note: Corrected value x ≈ 0.19 M; see note.
Question Objective 34. The reduction of NO3− occurs as NO3− + 4H⁺ + 3e → NO + 2H2O; E° = 0.96 V. The electrons are provided by Cd till the solution originally having 0.1 M NO3− and 0.4 M H⁺ shows that 80% of NO3− ions are converted to NO showing 1 bar pressure. The reduction potential of remaining solution. (a) 0.84 V (b) 1.36 V (c) 1.08 V (d) 1.56 V
Solution. Answer: (a). NO3− reacted = 0.8 × 0.1 = 0.08 M, so [NO3−] = 0.02 M; H⁺ used = 4 × 0.08 = 0.32, so [H⁺] = 0.08 M. ERP = 0.96 + (0.059/3) log([NO3−][H⁺]4/PNO) = 0.96 + (0.059/3) log(0.02 × (0.08)4/1) = 0.96 − 0.12 = 0.84 V.
Teacher's Note: Find leftover nitrate and acid from stoichiometry; H⁺ is used four per nitrate.
Exam Note: Remaining: 0.02 M NO₃⁻, 0.08 M H⁺.
Question Objective 35. 108 g solution of AgNO3 is electrolysed using Pt electrodes by passing a charge of 0.1 F. The mass of resultant solution left is: (a) 98 g (b) 107.2 g (c) 11.6 g (d) 96.4 g
Solution. Answer: (d). Cathode: Ag⁺ + e → Ag; anode: 2OH⁻ → H2O + ½O2 + 2e. 0.1 eq Ag⁺ is lost and 0.1 eq O2 is formed and escapes. Total mass loss = 0.1 × 108 + (0.1/4) × 32 = 10.8 + 0.8 = 11.6 g. Mass of solution = 108 − 11.6 = 96.4 g.
Teacher's Note: Solution loses deposited silver and the escaping oxygen.
Exam Note: Loss = Ag deposited + O₂ evolved.
Question Objective 36. On the basis of reaction, (4/3)Al + O2 → (2/3)Al2O3; ΔG = −827 kJ mol⁻¹ of O2 the minimum emf required to carry out an electrolysis of Al2O3: (a) 8.5 V (b) 2.14 V (c) 2.83 V (d) 1.42 V
Solution. Answer: (b). (4/3)Al involves 4e (2Al° → (Al³⁺)2 + 6e; 1 Al gives 3e). ΔG = −nEF: −827×10³ = −4 × E × 96500, so E = 2.14 V.
Teacher's Note: Per mole of O₂, four electrons are involved: n = 4.
Exam Note: E = 827000/(4 × 96500) = 2.14 V.
Question Objective 37. A Quinhydrone electrode in contact of H⁺ ion is coupled with standard calomel electrode. The E° of both electrodes are given as: Pt | Q, QH2 | H⁺ || 1 M KCl | Hg2Cl2(s) | Hg(l) | Pt; Q + 2H⁺ + 2e → QH2, E°Q,QH₂|H⁺|Pt = +0.699 V; ½Hg2Cl2(s) + e → Hg(l) + Cl⁻, E°Cl⁻|Hg₂Cl₂|Hg = +0.280 V. If emf of cell so obtained is −0.124, then pH is: (a) 5 (b) 6 (c) 7 (d) 8
Solution. Answer: (a). Ecell = EOP,QH₂ + ERP,cal = −0.699 + 0.059 pH + 0.280 = −0.419 + 0.059 pH. With −0.124 = −0.419 + 0.059 pH, pH = 5.
Teacher's Note: Quinhydrone is oxidised at the anode; its potential falls 0.059 V per pH unit.
Exam Note: −0.124 + 0.419 = 0.295 = 0.059 × 5.
Question Objective 38. The standard reduction potentials at 298 K for the following half reactions are given against each: Zn²⁺(aq) + 2e ⇌ Zn(s) −0.762; Cr³⁺(aq) + 3e ⇌ Cr(s) −0.740; 2H⁺(aq) + 2e ⇌ H2(g) 0.000; Fe³⁺(aq) + e ⇌ Fe²⁺(aq) 0.770. Which is the strongest reducing agent? (a) Zn(s) (b) Cr(s) (c) H2(g) (d) Fe²⁺(aq)
Solution. Answer: (a). E°OP for Zn = +0.762 V is the maximum among the given values; the more positive E°OP, the greater the tendency to be oxidised, so Zn is the strongest reducing agent.
Teacher's Note: Most negative reduction potential = strongest reducing agent.
Exam Note: Zn has the most negative E°RP (−0.762 V).
Question Objective 39. Faraday's laws of electrolysis are related to the: (a) atomic number of the reactants (b) atomic number of the anion (c) equivalent mass of the electrolyte (d) speed of the cation
Solution. Answer: (c). w/E = it/96500 (Faraday's first law); mass deposited depends on the equivalent mass.
Teacher's Note: Mass liberated ∝ charge × equivalent mass.
Exam Note: Faraday's laws involve equivalent mass.
Question Objective 40. A solution containing one mole per litre of each Cu(NO3)2, AgNO3, Hg2(NO3)2 is being electrolysed by using inert electrode. The values of standard electrode potential in volts reduction potential are: Ag | Ag⁺ = +0.80, 2Hg | Hg22+ = −0.79, Cu | Cu++ = +0.34, Mg | Mg++ = −2.37. With increasing voltage, the sequence of deposition of metals on the cathode will be: (a) Ag, Hg, Cu, Mg (b) Mg, Cu, Hg, Ag (c) Ag, Hg, Cu (d) Cu, Hg, Ag
Solution. Answer: (c). E°RP for Ag, Hg and Cu are +0.80, +0.79 and +0.34 V (the table's −0.79 is an oxidation-type value); the highest reduction potential deposits first. Mg²⁺ is not discharged in aqueous solution.
Teacher's Note: Highest reduction potential metal deposits first; Mg is not deposited from water.
Exam Note: Order: Ag (0.80), Hg (0.79), Cu (0.34).
Question Objective 41. The electric charge for electrodeposition of one gram equivalent of a substance is: (a) one ampere per second (b) 96,500 coulombs per second (c) one ampere for one hour (d) charge on one mole of electrons
Solution. Answer: (d). 1 faraday = N × e, the charge on one mole of electrons (96500 C), deposits one gram equivalent.
Teacher's Note: One faraday deposits one gram equivalent.
Exam Note: 1 F = charge of one mole of electrons.
Question Objective 42. The reaction, ½H2(g) + AgCl(s) → H⁺(aq) + Cl⁻(aq) + Ag(s) occurs in the galvanic cell: (a) Ag | AgCl(s) | KCl(soln.) | AgNO3(soln.) | Ag (b) Pt | H2(g) | HCl(soln.) || AgNO3(soln.) | Ag (c) Pt | H2(g) | HCl(soln.) || AgCl(s) | Ag (d) Pt | H2(g) | KCl(soln.) | AgCl(s) | Ag
Solution. Answer: (d), as printed. None of the other cells contains a salt bridge involving this reaction; the reaction needs a hydrogen electrode and an AgCl/Ag electrode sharing one chloride solution.
Teacher's Note: The reaction uses H₂ and AgCl/Ag electrodes in one chloride electrolyte.
Exam Note: Match species: H₂, Cl⁻, AgCl, Ag.
Question Objective 43. A solution of sodium sulphate in water is electrolysed using inert electrodes. The products at the cathode and anode are respectively: (a) H2, O2 (b) O2, H2 (c) O2, Na (d) O2, SO2
Solution. Answer: (a). Cathode: 2H⁺ + 2e → H2. Anode: 2OH⁻ → H2O + ½O2 + 2e.
Teacher's Note: Water, not Na⁺ or SO₄²⁻, is discharged.
Exam Note: Cathode H₂, anode O₂.
Question Objective 44. When a lead storage battery is discharged: (a) SO2 is evolved (b) Lead is formed (c) PbSO4 is consumed (d) H2SO4 is consumed
Solution. Answer: (d). Discharging: PbO2 + Pb + 2H2SO4 → 2PbSO4 + 2H2O; sulphuric acid is consumed and PbSO4 is formed.
Teacher's Note: Discharge makes PbSO₄ and dilutes the acid.
Exam Note: H₂SO₄ is used up on discharge.
Question Objective 45. The standard oxidation potentials, E°, for the half reactions are as follows: Zn → Zn²⁺ + 2e⁻, E° = +0.76 V; Fe → Fe²⁺ + 2e⁻, E° = +0.41 V. The EMF for the cell reaction Fe²⁺ + Zn → Zn²⁺ + Fe is: (a) −0.35 V (b) +0.35 V (c) +1.17 V (d) −1.17 V
Solution. Answer: (b). E°cell = E°OP,Zn + E°RP,Fe = 0.76 − 0.41 = +0.35 V.
Teacher's Note: Reverse the iron oxidation value to get its reduction potential.
Exam Note: E = 0.76 − 0.41 = 0.35 V.
Question Objective 46. If E°Cu²⁺|Cu = 0.34 V and E°Cu²⁺|Cu⁺ = 0.15 V than the value for disproportionation for Cu⁺ is: (a) −0.19 V (b) −0.38 V (c) 0.94 V (d) 0.38 V
Solution. Answer: (d). 2e + Cu²⁺ → Cu: ΔG°1 = −2 × 0.34F; Cu⁺ → Cu²⁺ + e: ΔG°2 = −1 × (−0.15)F. Then e + Cu⁺ → Cu: ΔG°3 = −0.68F + 0.15F, E°3 = +0.53 V. For 2Cu⁺ → Cu + Cu²⁺: E° = E°OP,Cu⁺/Cu²⁺ + E°RP,Cu⁺/Cu = −0.15 + 0.53 = +0.38 V.
Teacher's Note: First get E°(Cu⁺/Cu) from ΔG°, then add to the oxidation value of Cu⁺ → Cu²⁺.
Exam Note: E°(Cu⁺/Cu) = 0.53 V; E°disp = 0.38 V.
Question Objective 47. For the electrochemical cell, M | M⁺ || X⁻ | X, E°(M⁺/M) = 0.44 V and E°(X/X⁻) = 0.33 V. From this data one can deduce that: (a) M + X → M⁺ + X⁻ is the spontaneous reaction (b) M⁺ + X⁻ → M + X is the spontaneous reaction (c) Ecell = 0.77 V (d) Ecell = −0.77 V (IIT 2000)
Solution. Answer: (b). E°cell = E°OP,M/M⁺ + E°RP,X/X⁻ = −0.44 + 0.33 = −0.11 V. Thus M + X → M⁺ + X⁻ is non-spontaneous; the spontaneous reaction is M⁺ + X⁻ → M + X with E° = +0.11 V.
Teacher's Note: Negative E°cell for the written direction means the reverse reaction is spontaneous.
Exam Note: E°cell = −0.11 V, so reverse runs.
Question Objective 48. The correct relationship between Gibbs' energy change in a reaction and the corresponding equilibrium constant Kc is: (a) ΔG° = RT ln Kc (b) −ΔG° = RT ln Kc (c) ΔG = RT ln Kc (d) −ΔG = RT ln Kc
Solution. Answer: (b). ΔG = ΔG° + RT ln Q; at equilibrium ΔG = 0 and Q = Kc, so −ΔG° = RT ln Kc.
Teacher's Note: At equilibrium ΔG = 0, so the standard value carries the equilibrium information.
Exam Note: −ΔG° = RT ln K.
Question Objective 49. Saturated solution of KNO3 is used to make salt bridge because: (a) velocity of K⁺ is greater than that of NO3− (b) velocity of NO3− is greater than that of K⁺ (c) velocity of both K⁺ and NO3− are nearly the same (d) KNO3 is highly soluble in water
Solution. Answer: (c). A salt bridge needs an electrolyte whose cation and anion have nearly the same ionic mobility, so the liquid junction potential is minimised.
Teacher's Note: Equal ion speeds cancel the liquid junction potential.
Exam Note: Choose a salt with matched ion mobilities.
Question Objective 50. The correct order of equivalent conductance at infinite dilution of LiCl, NaCl and KCl is: (a) LiCl > NaCl > KCl (b) KCl > NaCl > LiCl (c) NaCl > KCl > LiCl (d) LiCl > KCl > NaCl
Solution. Answer: (b). Ionic mobility depends on the size of the hydrated ion. The ionic size in the case of hydrated cation is K⁺(aq) < Na⁺(aq) < Li⁺(aq); the smaller the hydrated ion, the greater its mobility, so Λ° is KCl > NaCl > LiCl.
Teacher's Note: Smaller ions are more hydrated, giving larger hydrated radius and lower mobility.
Exam Note: Hydrated size: Li⁺ largest, so Λ° smallest.
Question Objective 51. Standard electrode potential data are useful for understanding the suitability of an oxidant in a redox titration. Some half cell reactions and their standard potentials: MnO4− + 8H⁺ + 5e → Mn²⁺ + 4H2O, E° = 1.51 V; Cr2O72− + 14H⁺ + 6e → 2Cr³⁺ + 7H2O, E° = 1.38 V; Fe³⁺ + e → Fe²⁺, E° = 0.77 V; Cl2 + 2e → 2Cl⁻, E° = 1.40 V. Identify the only incorrect statement regarding the quantitative estimation of aqueous Fe(NO3)2: (a) MnO4− can be used in aqueous HCl (b) Cr2O72− can be used in aqueous HCl (c) MnO4− can be used in aqueous H2SO4 (d) Cr2O72− can be used in aqueous H2SO4 (IIT 2002)
Solution. Answer: (a). MnO4− oxidises Cl⁻: E°cell = −1.40 + 1.51 = 0.11 V, feasible. It also oxidises Fe²⁺: −0.77 + 1.51 = 0.74 V. So MnO4− will not oxidise only Fe²⁺ in aqueous HCl; it also oxidises Cl⁻ to Cl2. A suitable oxidant should not oxidise Cl⁻ and should oxidise only Fe²⁺ in redox titration.
Teacher's Note: Permanganate in HCl wastes oxidant on chloride, giving wrong titre.
Exam Note: Check E°cell with Cl⁻ as well as Fe²⁺.
Question Objective 52. In the electrolytic cell, flow of electrons is: (a) cathode to anode in solution (b) anode to cathode through external supply (c) cathode to anode through internal supply (d) anode to cathode through internal supply (IIT 2003)
Solution. Answer: (b). Current flows from anode to cathode in the external circuit of an electrolytic cell and thus electrons flow from anode to cathode through the external wires.
Teacher's Note: Electrons never travel through the solution; ions carry current there.
Exam Note: Electrons move externally anode to cathode.
Question Objective 53. The emf of the cell Zn | Zn²⁺ (0.01 M) || Fe²⁺ (0.001 M) | Fe at 298 K is 0.2905, then the value of equilibrium constant for the cell reaction is: (a) e0.32/0.0295 (b) 100.32/0.0295 (c) 100.26/0.0295 (d) 100.32/0.0591 (IIT 2004)
Solution. Answer: (b). Zn + Fe²⁺ → Fe + Zn²⁺: Ecell = E°cell + (0.059/2) log([Fe²⁺]/[Zn²⁺]); 0.2905 = E°cell + 0.0295 log(0.001/0.01), so E°cell = 0.2905 + 0.0295 = 0.32 V. Then E°cell = (0.059/2) log Kc: 0.32 = 0.0295 log Kc, Kc = 100.32/0.0295.
Teacher's Note: Get E° from the measured emf, then use log K = nE°/0.059.
Exam Note: E° = 0.32 V; K = 10^(0.32/0.0295).
Question Objective 54. The rusting of iron takes place as follows: 2H⁺ + 2e + ½O2 → H2O(l), E° = +1.23 V; Fe²⁺ + 2e → Fe(s), E° = −0.44 V. The ΔG° for the net process is: (a) −322 kJ mol⁻¹ (b) −161 kJ mol⁻¹ (c) −152 kJ mol⁻¹ (d) −76 kJ mol⁻¹ (IIT 2005)
Solution. Answer: (a). E°cell = E°OP,Fe + E°RP,H⁺/O₂ = 0.44 + 1.23 = 1.67 V. ΔG° = −nE°F = −2 × 1.67 × 96500 = −322.31 kJ mol⁻¹.
Teacher's Note: Two electrons per Fe; combine oxidation of Fe with O₂ reduction.
Exam Note: ΔG° = −2 × 1.67 × 96500 J.
Question Objective 55. Electrolysis of dilute NaCl solution was carried out by passing 10 mA current. The time required to liberate 0.01 mol of H2 gas at the cathode is: (a) 9.65×104 sec (b) 19.3×104 sec (c) 28.95×104 sec (d) 38.6×104 sec (IIT 2008)
Solution. Answer: (b). 0.01 mol H2 = 0.02 eq: 0.01 × 2 = (10 × 10−3 × t)/96500, so t = 19.3×104 s.
Teacher's Note: Two electrons per H₂, and current is 10 mA = 0.01 A.
Exam Note: 0.02 F × 96500 ÷ 0.01 A = 1.93×10⁵ s.
Question Objective 56. Consider the following cell reaction: 2Fe(s) + O2(g) + 4H⁺ → 2Fe²⁺(aq) + 2H2O(l), E° = 1.67 V. At [Fe²⁺] = 10−3 M, P(O2) = 0.1 atm and pH = 3, the cell potential at 25 °C is: (a) 1.47 V (b) 1.77 V (c) 1.87 V (d) 1.57 V (IIT 2011)
Solution. Answer: (d). Ecell = E° + (0.059/4) log(PO₂[H⁺]4/[Fe²⁺]2) = 1.67 + (0.059/4) log(0.1 × (10−3)4/(10−3)2) = 1.67 + (0.059/4) log 10−7 = 1.67 − 0.103 = 1.57 V.
Teacher's Note: n = 4 for two Fe; Q written reactants over products for the Nernst form used.
Exam Note: Argument of log = 10⁻⁷; E = 1.57 V.
Question Objective 57. Given: E°Cr³⁺/Cr = −0.74 V; E°MnO₄⁻/Mn²⁺ = 1.51 V; E°Cr₂O₇²⁻/Cr³⁺ = 1.33 V; E°Cl/Cl⁻ = 1.36 V. Based on the data given above, the strongest oxidising agent will be: (a) Mn²⁺ (b) MnO4− (c) Cr³⁺ (d) Cl⁻ [JEE (Main) 2013]
Solution. Answer: (b). E°RP of MnO4−/Mn²⁺ is the highest, so MnO4− is easily reduced and is the strongest oxidising agent.
Teacher's Note: Strongest oxidant is the oxidised form of the couple with highest E°RP.
Exam Note: Highest E°RP is 1.51 V: MnO₄⁻.
Question Objective 58. Four successive members of the first row transition elements are listed below with atomic numbers. Which one of them is expected to have the highest E°M³⁺/M²⁺ value? (a) Fe (Z = 26) (b) Co (Z = 27) (c) Cr (Z = 24) (d) Mn (Z = 25) [JEE (Main) 2013]
Solution. Answer: (b). E°Mn³⁺/Mn²⁺ = 1.57 V, E°Fe³⁺/Fe²⁺ = 0.77 V, E°Co³⁺/Co²⁺ = 1.97 V, E°Cr³⁺/Cr²⁺ = −0.41 V. Co has the highest value.
Teacher's Note: Co²⁺ is stable (d⁷), Co³⁺ strongly oxidising, so its M³⁺/M²⁺ value is highest.
Exam Note: Compare 1.57, 0.77, 1.97, −0.41: Co.
Objective Problems (More Than One Answer Correct)
Question More Than One Correct 1. In the atmosphere of industrial smog, copper corrodes to form: (a) basic copper carbonate (b) copper sulphide (c) basic copper sulphate (d) copper oxide
Solution. Answer: (a), (c). 8Cu + 6H2O + 2SO2 + 5O2 → 2[CuSO4·3Cu(OH)2] (basic copper sulphate); 2Cu + H2O + CO2 + O2 → [CuCO3·Cu(OH)2] (basic copper carbonate).
Teacher's Note: Smog contains SO₂ and CO₂, so both basic sulphate and basic carbonate form on copper.
Exam Note: Green patina: basic carbonate and basic sulphate.
Question More Than One Correct 2. The tarnishing of silver ornaments in atmosphere is due to: (a) Ag2O (b) Ag2S (c) Ag2CO3 (d) Ag2SO4
Solution. Answer: (a), (b). 2Ag + ½O2 → Ag2O; 2Ag + H2S → Ag2S + H2.
Teacher's Note: Atmospheric O₂ and H₂S blacken silver.
Exam Note: Tarnish: Ag₂O and Ag₂S.
Question More Than One Correct 3. If A + B ⇌ C + D; KC = K1 and E° = a V, and 2A + 2B ⇌ 2C + 2D; KC = K2 and E° = b V, then: (a) a = b (b) K2 = K12 (c) a = 2b (d) b = a2
Solution. Answer: (a), (b). K1 = [C][D]/[A][B] and K2 = [C]2[D]2/[A]2[B]2 = K12. Also E° is independent of stoichiometry, so a = b.
Teacher's Note: Doubling the equation squares K but leaves the intensive E° unchanged.
Exam Note: K squares; E° does not.
Question More Than One Correct 4. Rusting of iron is catalysed by: (a) H⁺ (b) dissolved CO2 in water (c) O2 (d) impurities present in Fe
Solution. Answer: (a), (b), (c), (d) (key: 'Follow text'). Rusting is favoured by moisture, dissolved CO2 (giving H⁺), oxygen and impurities in iron that form local cells.
Teacher's Note: Rusting is an electrochemical process needing acid, oxygen and impurity sites.
Exam Note: All four factors promote rusting.
Question More Than One Correct 5. Select the wrong relations: (a) ΔS = (∂E/∂T)P × nF (b) −ΔS = (∂E/∂T)P × nF (c) (∂E/∂T)P = (∂ΔS/∂T) (d) (∂E/∂T)P = (ΔH + nEF)/T
Solution. Answer printed in key: (a), (d). Corrected: the relations are ΔS = +nF(∂E/∂T)P and −nEF = ΔH + T(−nF)(∂E/∂T)P, so (∂E/∂T)P = (ΔH + nEF)/(nFT). Hence (a) is correct, while (b) has the wrong sign, (c) is dimensionally inconsistent and (d) lacks nF. The wrong relations are (b), (c), (d). (The book's derivation: ΔG = ΔH − TΔS and ΔG = ΔH + T(∂ΔG/∂T)P, so (∂ΔG/∂T)P = −ΔS, i.e. ΔS = +nF(∂E/∂T)P.)
Teacher's Note: Gibbs-Helmholtz: (∂ΔG/∂T) = −ΔS, and ΔG = −nFE, so ΔS = nF(∂E/∂T).
Exam Note: Only ΔS = nF(∂E/∂T) is right.
Question More Than One Correct 6. Select the correct statements about NHE: (a) E° of NHE has arbitrarily assumed to be zero (b) E° of NHE is equal to zero (c) NHE refers as PtH₂ 1 bar | H⁺aq (a = 1) at 25 °C (d) NHE is very susceptible to dissolved O2, H2S and all other reducing agents
Solution. Answer: (a), (c), (d) (key: 'Follow text'). The zero is assigned arbitrarily by convention, so (b) is not a measured fact; NHE is Pt, H2(1 bar) | H⁺(a = 1) at 25 °C and is easily poisoned.
Teacher's Note: Zero for NHE is a convention, not a measured quantity.
Exam Note: NHE zero is assumed, not measured.
Question More Than One Correct 7. In which of the following salt bridge is not needed? (a) Pb | PbSO4 | H2SO4 | PbO2(s) | Pb (b) Cd | CdO(s) | KOHaq | NiO2(s) | Ni (c) Fe(s) | FeO(s) | KOHaq, Ni2O3(s) | Ni (d) Zn | ZnSO4 | CuSO4 | Cu
Solution. Answer: (a), (b), (c). A salt bridge removes the liquid junction potential produced by different speeds of ions in separate cathodic and anodic compartments. Cells (a), (b) and (c) use one common electrolyte, so none is needed; (d) has two different electrolytes and needs it.
Teacher's Note: Cells with one common electrolyte have no liquid junction.
Exam Note: Single electrolyte means no salt bridge.
Question More Than One Correct 8. Select the correct statements if 9.65 ampere current is passed for 1 hour through the cell Ag | Ag⁺ (1 M) || Cu²⁺ (1 M) | Cu: (a) Ag will oxidise to Ag⁺ and new [Ag⁺] = 1.36 M (b) Ag⁺ will reduce to Ag and new [Ag⁺] = 0.64 M (c) Cu²⁺ will reduce to Cu and new [Cu²⁺] = 0.82 M (d) Cu will oxidise to Cu²⁺ and new [Cu²⁺] = 0.82 M
Solution. Answer: (a), (c). w/E = it/96500 = 9.65 × 3600/96500 = 0.36 eq, i.e. 0.36 mol of Ag⁺ and 0.18 mol of Cu²⁺. Ag oxidises to Ag⁺ ([Ag⁺] = 1 + 0.36 = 1.36 M) and Cu²⁺ is reduced to Cu ([Cu²⁺] = 1 − 0.18 = 0.82 M).
Teacher's Note: The cell is forced in reverse: silver dissolves, copper deposits.
Exam Note: 0.36 F: Ag⁺ +0.36, Cu²⁺ −0.18.
Question More Than One Correct 9. Which of the following metals can not be obtained by the electrolysis of an aqueous solution of their salt: (a) Ag (b) Mg (c) Cu (d) Cr (e) Al
Solution. Answer: (b), (e). Strongly electropositive metals (Mg, Al) cannot be reduced in presence of H2O; H+ is discharged instead.
Teacher's Note: Metals with very negative E° give hydrogen from aqueous solution.
Exam Note: Mg and Al need molten-salt electrolysis.
Question More Than One Correct 10. The standard reduction potential values of three metallic cations X, Y and Z are 0.52, −3.03 and −1.18 V respectively. The order of reducing power of the corresponding metals is: (a) Y > Z > X (b) X > Y > Z (c) Z > Y > X (d) Z > X > Y
Solution. Answer: (a). The lower E°RP, the greater E°OP and the greater the tendency to get oxidised, so reducing power is Y > Z > X.
Teacher's Note: Same ranking as Objective 25: lowest reduction potential, strongest reductant.
Exam Note: Order by E°OP: Y (3.03), Z (1.18), X (−0.52).
Question More Than One Correct 11. The function of salt bridge is: (a) to maintain electrical neutrality of two half cell solution (b) to eliminate liquid junction potential (c) to complete the circuit (d) to produce current
Solution. Answer: (a), (b), (c). A salt bridge keeps both half-cells electrically neutral, minimises the liquid junction potential and completes the circuit; it does not itself produce current.
Teacher's Note: Salt bridge supports, but does not generate, the cell current.
Exam Note: Neutrality, circuit completion, no junction potential.
Question More Than One Correct 12. In a cell Zn | Zn²⁺ || H⁺ | H2Pt, the addition of H2SO4 to cathode compartment: (a) decreases EMF (b) increases EMF (c) shift equilibrium to right (d) shifts equilibrium to left
Solution. Answer: (b), (c). E = E°cell + (0.059/2) log([H⁺]2/[Zn²⁺]) for Zn + 2H⁺ → Zn²⁺ + H2. Adding H2SO4 to the cathode compartment raises [H⁺], so emf increases and the reaction shifts to the right.
Teacher's Note: More reactant H⁺ raises Q⁻¹ and increases emf.
Exam Note: [H⁺] up: emf up, shift right.
Question More Than One Correct 13. For the reduction of NO3− ion in aqueous solution, E° is +0.96 V. Values of E° for some metals are given below: V²⁺(aq) + 2e → V, E° = −1.19 V; Fe³⁺(aq) + 3e → Fe, E° = −0.04 V; Au³⁺(aq) + 3e → Au, E° = +1.40 V; Hg²⁺(aq) + 2e → Hg, E° = +0.86 V. The pairs of metal that is (are) oxidised by NO3− in aqueous solution is (are): (a) V and Hg (b) Hg and Fe (c) Fe and Cu (d) Fe and V (IIT 2009)
Solution. Answer: (a), (b), (d). Au is not oxidised because its E°cell is negative. For V: E° = E°OP,V + E°RP,NO₃⁻ = 1.19 + 0.96 = 2.15 V; Fe: 0.04 + 0.96 = 1.0 V; Au: −1.40 + 0.96 = −0.44 V; Hg: −0.86 + 0.96 = +0.10 V. So V, Fe and Hg are oxidised; the pairs (a), (b) and (d) qualify. (c) contains Cu, whose E° is not given in the data.
Teacher's Note: A metal is oxidised by nitrate only if E°OP + 0.96 V is positive.
Exam Note: V, Fe, Hg qualify; Au does not.
Comprehension Based Problems
Question Comprehension 1 [1]. Comprehension 1: A current of 15 ampere is used to plate Ni from NiSO4 bath. Both H2 and Ni are formed at cathode. The current efficiency of Ni formation is 60%. (atomic mass of Ni = 58.71) [1] Mass of Ni is plated per hr? (a) 9.85 g (b) 0.5596 g (c) 16.42 g (d) 12.82 g
Solution. Answer: (a). Total charge = 15 × 3600/96500 = 0.5596 F. Current efficiency for Ni is 60%, so 0.5596 × 60/100 = 0.3358 eq Ni. wNi = 0.3358 × 58.71/2 = 9.856 g.
Teacher's Note: Only 60% of the charge deposits nickel; the rest evolves hydrogen.
Exam Note: Efficiency × Q ÷ 96500 × (58.71/2).
Question Comprehension 1 [2]. (Comprehension 1) [2] The thickness of plating if the cathode consists of a sheet of 4 cm² which is coated on both sides is (density of Ni is 8.9 g mL⁻¹): (a) 0.276 cm (b) 0.272 cm (c) 0.316 cm (d) 0.138 cm
Solution. Answer: (d). Volume = 4 × 2 × thickness = w/d, so thickness = 9.856/(8.9 × 8) = 0.138 cm.
Teacher's Note: Coated on both sides doubles the area: 8 cm².
Exam Note: Volume = mass ÷ density = area × thickness.
Question Comprehension 1 [3]. (Comprehension 1) [3] The volume of H2 formed per hr at STP: (a) 6.62 litre (b) 6.26 litre (c) 2.51 litre (d) 5.02 litre
Solution. Answer: (c). H2 takes 40% of the charge: wH₂ = 0.5596 × 0.40 × 1 = 0.2238 g (0.2238 eq × 1.0 g); V = 0.2238 × 22.4/2 = 2.51 litre.
Teacher's Note: The remaining 40% of the charge discharges H⁺.
Exam Note: 0.2238 g H₂ = 0.1119 mol = 2.51 L.
Question Comprehension 1 [4]. (Comprehension 1) [4] The volume of O2 formed per hr at STP: (a) 6.26 litre (b) 3.13 litre (c) 9.39 litre (d) 2.51 litre
Solution. Answer: (b). At the anode all 0.5596 F evolves O2 (2OH⁻ → H2O + ½O2 + 2e): wO₂ = 0.5596 × 8 = 4.4768 g; V = 4.4768 × 22.4/32 = 3.13 litre.
Teacher's Note: Anode discharges oxygen using the full charge, 100% efficient.
Exam Note: 0.5596 eq × 8 g = 4.477 g O₂.
Question Comprehension 2 [1]. Comprehension 2: E° values for Fe → Fe²⁺ + 2e and Fe → Fe³⁺ + 3e are 0.440 V and 0.036 V respectively. [1] The number of cells showing the overall cell reaction Fe + 2Fe³⁺ → 3Fe²⁺: (a) 1 (b) 2 (c) 3 (d) 4
Solution. Answer: (c). Cell 1: Fe | Fe²⁺ || Fe³⁺ | Fe, n = 6; Cell 2: Fe | Fe²⁺ || Fe³⁺, Fe²⁺ | Pt, n = 2; Cell 3: Fe | Fe³⁺ || Fe³⁺, Fe²⁺ | Pt, n = 3.
Teacher's Note: Each pairing of half-reactions gives one cell for the same net reaction.
Exam Note: Three cells: n = 6, 2, 3.
Question Comprehension 2 [2]. (Comprehension 2) [2] ΔG° for each cell for given overall reaction in [1] is: (a) +2.424 F (b) −2.424 F (c) +1.616 F (d) −1.616 F
Solution. Answer: (b). Fe → Fe²⁺ + 2e (E°OP = +0.440 V) and Fe³⁺ + 3e → Fe (E°RP = −0.036 V): Fe³⁺ + e → Fe²⁺ has −ΔG° = 2 × 0.440F + 3 × 0.036F = +0.772F, so E° = +0.772 V. Cell 1: E° = 0.440 − 0.036 = 0.404 V, ΔG° = −6 × 0.404F = −2.424F. Cell 2: E° = 0.440 + 0.772 = 1.212 V, ΔG° = −2 × 1.212F = −2.424F. Cell 3: E° = 0.036 + 0.772 = 0.808 V, ΔG° = −3 × 0.808F = −2.424F.
Teacher's Note: ΔG° is state-function-like: same overall reaction, same ΔG°, whatever the cell.
Exam Note: ΔG° = −2.424 F for all three.
Question Comprehension 2 [3]. (Comprehension 2) [3] E° for Fe³⁺ + e → Fe²⁺ is: (a) +0.672 V (b) +0.772 V (c) −0.040 (d) +0.040 V
Solution. Answer: (b). Fe → Fe²⁺ + 2e: −ΔG°1 = 2 × 0.440F; Fe³⁺ + 3e → Fe: −ΔG°2 = 3 × (−0.036)F. Adding gives Fe³⁺ + e → Fe²⁺: −1 × E°F = 2 × 0.440F − 3 × 0.036F = +0.772F, so E° = +0.772 V.
Teacher's Note: Combine ΔG° of the two half-reactions, then divide by one electron.
Exam Note: E° = 0.880 − 0.108 = 0.772 V.
Question Comprehension 2 [4]. (Comprehension 2) [4] The E° for Fe | Fe²⁺ || Fe³⁺, Fe²⁺ | Pt is: (a) 1.212 V (b) 0.404 V (c) 0.808 V (d) −0.404 V
Solution. Answer: (a). Fe → Fe²⁺ + 2e (E°OP = +0.440 V); 2Fe³⁺ + 2e → 2Fe²⁺ (E°RP = +0.772 V). E°cell = 0.440 + 0.772 = 1.212 V.
Teacher's Note: Add the oxidation potential of Fe to the reduction potential of Fe³⁺/Fe²⁺.
Exam Note: 0.440 + 0.772 = 1.212 V.
Question Comprehension 2 [5]. (Comprehension 2) [5] Select the correct statements: (a) The overall reaction and ΔG° for each cell is same (b) The E°cell and 'n' values are different for each cell (c) The ΔG° depends upon the cell reaction where as E°cell depends upon the make-up of cell (d) All of the above
Solution. Answer: (d). From [2]: all three cells have the same reaction and ΔG° = −2.424F, while E°cell (1.212, 0.404, 0.808 V) and n (2, 6, 3) differ with the make-up of the cell.
Teacher's Note: ΔG° belongs to the reaction; E° and n belong to the way the cell is built.
Exam Note: All three statements follow from [2].
Question Comprehension 3 [1]. Comprehension 3: A 4.0 molar aqueous solution of NaCl is prepared and 500 mL of this solution is electrolysed. This leads to the evolution of chlorine gas at one of the electrodes (atomic mass: Na = 23, Hg = 200; 1 Faraday = 96500 coulombs) (IIT 2007). [1] The total number of mole of chlorine gas evolved is: (a) 0.5 (b) 1.0 (c) 2.0 (d) 3.0
Solution. Answer: (b). Meq. of Cl⁻ = 4 × 500 = 2000, so eq. of Cl⁻ = 2 = eq. of Cl2 (2Cl⁻ → Cl2 + 2e). Mole of Cl2 = 1.
Teacher's Note: 500 mL of 4 M NaCl holds 2 mol Cl⁻; two Cl⁻ make one Cl₂.
Exam Note: 2 mol Cl⁻ gives 1 mol Cl₂.
Question Comprehension 3 [2]. (Comprehension 3) [2] If the cathode is a Hg electrode, the maximum mass (g) of amalgam formed from this solution is: (a) 200 (b) 225 (c) 400 (d) 446
Solution. Answer: (d). Eq. of Na = 4 × 500/1000 = 2, i.e. 2 mol Na. Mass of 2[NaHg] = 2 × (23 + 200) = 446 g.
Teacher's Note: Each sodium atom picks up one mercury atom in the amalgam NaHg.
Exam Note: 2 mol NaHg × 223 g = 446 g.
Question Comprehension 3 [3]. (Comprehension 3) [3] The total charge (coulomb) required for complete electrolysis is: (a) 24125 (b) 48250 (c) 96500 (d) 193000
Solution. Answer: (d). w/E = Q/96500 with w/E = 2 eq: Q = 2 × 96500 = 193000 C.
Teacher's Note: Complete electrolysis needs one faraday per equivalent: 2 eq.
Exam Note: Q = equivalents × 96500.
Question Comprehension 4 [1]. Comprehension 4: Redox reactions play a pivotal role in chemistry and biology. The values of standard redox potential (E°) of two half-reactions decide which way the reaction is expected to proceed. Given half-cell reactions with E° values (V vs normal hydrogen electrode): I2 + 2e⁻ → 2I⁻, E° = 0.54; Cl2 + 2e⁻ → 2Cl⁻, E° = 1.36; Mn³⁺ + e⁻ → Mn²⁺, E° = 1.50; Fe³⁺ + e⁻ → Fe²⁺, E° = 0.77; O2 + 4H⁺ + 4e⁻ → 2H2O, E° = 1.23 [IIT 2007]. [1] Among the following, identify the correct statement: (a) Chloride ion is oxidised by O2 (b) Fe²⁺ is oxidised by iodine (c) Iodide ion is oxidised by chlorine (d) Mn²⁺ is oxidised by chlorine
Solution. Answer: (c). 2I⁻ + Cl2 → I2 + 2Cl⁻: E°redox = E°RP,Cl₂ + E°OP,I₂ = 1.36 − 0.54 = 0.82 V (positive, feasible).
Teacher's Note: Oxidant must have the higher reduction potential: Cl₂ (1.36) over I₂ (0.54).
Exam Note: E° = 1.36 − 0.54 = +0.82 V.
Question Comprehension 4 [2]. (Comprehension 4) [2] While Fe³⁺ is stable, Mn³⁺ is not stable in acid solution because: (a) O2 oxidises Mn²⁺ to Mn³⁺ (b) O2 oxidises both Mn²⁺ to Mn³⁺ and Fe²⁺ to Fe³⁺ (c) Fe³⁺ oxidises H2O to O2 (d) Mn³⁺ oxidises H2O to O2
Solution. Answer: (d). 4Mn³⁺ + 2H2O → 4Mn²⁺ + O2 + 4H⁺: E°redox = E°RP,Mn + E°OP,H₂O = 1.50 − 1.23 = 0.27 V, so the reaction is possible. For Fe³⁺ and H2O: 0.77 − 1.23 = −0.46 V, so Fe³⁺ is not reduced by H2O.
Teacher's Note: Mn³⁺ (1.50 V) exceeds O₂/H₂O (1.23 V); Fe³⁺ (0.77 V) does not.
Exam Note: Positive E° only for Mn³⁺ with water.
Question Comprehension 4 [3]. (Comprehension 4) [3] Sodium fusion extract, obtained from aniline, on treatment with iron (II) sulphate and H2SO4 in presence of air gives a Prussian blue precipitate. The blue colour is due to the formation of: (a) Fe4[Fe(CN)6]3 (b) Fe3[Fe(CN)6]2 (c) Fe4[Fe(CN)6]2 (d) Fe3[Fe(CN)6]3
Solution. Answer: (a), as printed in the key. Air oxidises Fe²⁺ to Fe³⁺, which combines with hexacyanoferrate(II) to give Prussian blue, Fe4[Fe(CN)6]3.
Teacher's Note: Prussian blue is ferric ferrocyanide: four Fe³⁺ with three [Fe(CN)₆]⁴⁻.
Exam Note: Prussian blue = Fe₄[Fe(CN)₆]₃.
Question Comprehension 5 [1]. Comprehension 5: The concentration of potassium ions inside a biological cell is at least twenty times higher than the out side. The resulting potential difference across the cell is important in several processes such as transmission of nerve impulses and maintaining the ion balance. A simple model for such a concentration cell involving a metal M is: M(s) | M⁺(aq), 0.05 M || M⁺(aq), 1 M | M(s). For the above electrolytic cell, the magnitude of cell potential |Ecell| = 70 mV (IIT 2010). [1] For the above cell: (a) Ecell < 0; ΔG > 0 (b) Ecell > 0; ΔG < 0 (c) Ecell < 0; ΔG° > 0 (d) Ecell > 0; ΔG° < 0
Solution. Answer: (b). The given cell is a concentration cell, not an electrolytic cell as reported. E° = 0 but E and ΔG are not: Ecell = EOP + ERP = 0.059 log([M⁺]R.H.S./[M⁺]L.H.S.) = 0.059 log(1/0.05) = 0.059 × 1.30 = 0.076 V ≈ 70 mV, so Ecell is +ve and ΔG is −ve.
Teacher's Note: Spontaneous concentration cell: positive emf, negative ΔG, zero ΔG°.
Exam Note: ΔG° = 0 for a concentration cell.
Question Comprehension 5 [2]. (Comprehension 5) [2] If the 0.05 M solution of M⁺ is replaced by a 0.0025 M solution M⁺, then the magnitude of cell potential would be: (a) 35 mV (b) 70 mV (c) 140 mV (d) 700 mV
Solution. Answer: (c). Ecell = 0.059 log(1/0.0025) = 0.059 log(1/(0.05)2) = 0.059 × 2 × 1.30 ≈ 0.153 V. Since 0.0025 = (0.05)2, the log term is twice the earlier one, so the emf doubles from 70 mV to 140 mV. (The book prints the intermediate figure 0.146 V ≈ 140 mV, using the same doubling.)
Teacher's Note: Ratio 400 is the square of 20, so the log doubles and the emf doubles.
Exam Note: Squared concentration ratio doubles the emf.
Question Comprehension 6 [1]. Comprehension 6: The electrochemical cell shown below is a concentration cell: M | M²⁺ (saturated solution of a sparingly soluble salt MX2) || M²⁺ (0.001 mol dm⁻³) | M. The emf of the cell depends on the difference in concentrations of M²⁺ ions at the two electrodes. The emf of the cell at 298 K is 0.059 V (IIT 2012). [1] The value of ΔG (kJ mol⁻¹) for the given cell is (take 1F = 96500 C mol⁻¹): (a) −5.7 (b) 5.7 (c) 11.4 (d) −11.4
Solution. Answer: (d). At the anode M(s) → M²⁺(aq) + 2e⁻; at the cathode M²⁺(aq) + 2e⁻ → M(s). n = 2: ΔG = −nFEcell = −2 × 96500 × 0.059 = −11387 J = −11.4 kJ mol⁻¹.
Teacher's Note: Two-electron concentration cell; ΔG is negative because emf is positive.
Exam Note: ΔG = −2 × 96500 × 0.059 J.
Question Comprehension 6 [2]. (Comprehension 6) [2] The solubility product (Ksp; mol³ dm⁻⁹) of MX2 at 298 K based on the information available for the given concentration cell is (take 2.303 × R × 298/F = 0.059 V): (a) 1×10−15 (b) 4×10−15 (c) 1×10−12 (d) 4×10−12
Solution. Answer: (b). Ecell = (0.059/2) log([M²⁺]R.H.S./[M²⁺]L.H.S.); 0.059 = (0.059/2) log(0.001/[M²⁺]L.H.S.), so [M²⁺]L.H.S. = 10−5 M. For MX2 ⇌ M²⁺ + 2X⁻ with solubility s: Ksp = 4s3 = 4 × (10−5)3 = 4×10−15.
Teacher's Note: Saturated solution's M²⁺ concentration is the solubility s; Ksp = 4s³ for MX₂.
Exam Note: Cell emf gives s = 10⁻⁵ M; Ksp = 4s³.
Statement Explanation Problems
Question Statement-Explanation 1. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Anode is the electrode at which oxidation occurs and cathode is the electrode at which reduction occurs.
E: Anode and cathode in electrochemical and electrolytic cells have opposite polarity.
Solution. Answer: (d). Both are facts, but the polarity explanation does not explain the definition of anode and cathode.
Teacher's Note: Anode and cathode are defined by oxidation and reduction, not by polarity.
Exam Note: Definition by process, not sign.
Question Statement-Explanation 2. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: An irreversible cell is Zn | H2SO4 | Ag showing redox change: Zn → Zn²⁺ + 2e; 2H⁺ + 2e → H2; Zn + H2SO4 → ZnSO4 + H2.
E: The cell on connecting through another cell having its potential slightly greater than test cell, the redox reaction becomes: 2Ag → 2Ag⁺ + 2e; 2H⁺ + 2e → H2; 2Ag + H2SO4 → Ag2SO4 + H2.
Solution. Answer: (c). In a reversible cell, the redox change is reversed if it is connected with another cell of slightly higher emf, but in the test cell it is not so in this case, so the cell is irreversible.
Teacher's Note: Reversibility means the cell reaction can be reversed by an opposing slightly larger emf.
Exam Note: Different reaction on reversal means irreversible.
Question Statement-Explanation 3. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: E°cell is an intensive property.
E: ΔG°/n is also an intensive property.
Solution. Answer: (c). −ΔG° = nE°F, so E° = −ΔG°/nF. Since ΔG° is extensive and n is extensive, ΔG°/n is intensive, and E° is intensive too; ΔG°/n explains why.
Teacher's Note: Free energy per mole of electrons does not depend on the amount of reaction.
Exam Note: E° = −ΔG°/nF, a per-electron quantity.
Question Statement-Explanation 4. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: H2S reacts with oxygen under standard conditions in acid medium to give H2O and sulphur.
E: E°H⁺/O₂/Pt > E°H⁺/H₂S/S.
Solution. Answer: (c). ½O2 + 2H⁺ + 2e → H2O (E°RP = A); H2S → 2H⁺ + S + 2e (E°OP = B); H2S + ½O2 → H2O + S. E°cell = E°OP,H₂S/H⁺/S + E°RP,H⁺/O₂/Pt = +ve (given E°RP,H⁺/O₂/Pt > E°RP,H⁺/H₂S/S).
Teacher's Note: Spontaneous when the oxidant's reduction potential exceeds that of the reductant's couple.
Exam Note: Positive E°cell needs E°(O₂) > E°(S).
Question Statement-Explanation 5. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: The standard reduction potential of Mn+/M electrode increases with Mn+ ion.
E: The standard reduction potential is given by: ERP = E°RP + (0.059/n) log[Mn+].
Solution. Answer: (c). The Nernst equation shows that the reduction potential rises with [Mn+]; the equation is the correct explanation for the statement (taking 'standard reduction potential' as the electrode potential at that ion concentration).
Teacher's Note: Electrode potential, not E°, changes with ion concentration; the statement is loosely worded.
Exam Note: Nernst: higher [Mⁿ⁺] raises the potential.
Question Statement-Explanation 6. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: The concentration cell PtH₂(P₁) | HCl | H2(P2)Pt would show spontaneous flow of current only when P1 > P2 whereas concentration cell PtH₂ | HCl(C1) || HCl(C2) | H2Pt show spontaneous flow of current only when C2 > C1.
E: Case I: Ecell = (0.059/2) log(P1/P2); Case II: Ecell = (0.059/1) log(C1/C2).
Solution. Answer: (a). Case I: H2(P1) → 2H⁺ + 2e; 2H⁺ + 2e → H2(P2); Ecell = (0.059/2) log(P1/P2), positive if P1 > P2. Case II: H2 → 2H+(C1) + 2e; 2H+(C2) + 2e → H2; Ecell = (0.059/2) log(C2/C1), positive if C2 > C1. S is correct but the E expression for Case II (ratio C1/C2) is wrong.
Teacher's Note: In a concentration cell the electrolyte flows from the more concentrated cathode side; ratio is cathode over anode.
Exam Note: E for case II needs C₂/C₁, not C₁/C₂.
Question Statement-Explanation 7. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: The reference electrode silver-silver chloride is used as secondary reference electrode.
E: The electrode is reversible with respect to Cl⁻ ions.
Solution. Answer: (d). Both are facts, but reversibility to Cl⁻ is not the reason it is called a secondary reference electrode (that is because its potential is measured against the primary NHE).
Teacher's Note: Secondary means calibrated against the primary standard, the NHE.
Exam Note: Reversible to Cl⁻ is true but not the cause.
Question Statement-Explanation 8. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Passage of charge through CuSO4(aq) solution in presence of Pt electrode increases its pH.
E: Concentration of [OH⁻] in solution decreases.
Solution. Answer: (c). Anode: 2H2O → 4H⁺ + O2 + 4e (or 2OH⁻ → H2O + ½O2 + 2e); cathode: Cu²⁺ + 2e → Cu. OH⁻ is removed, [OH⁻] decreases and pH falls (acid forms). Printed key: (c).
Teacher's Note: Platinum anode oxidises water or hydroxide, leaving H⁺ behind.
Exam Note: OH⁻ consumed at anode, solution turns acidic.
Question Statement-Explanation 9. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: If two half reactions with electrode potential E°1 and E°2 gives a third half reaction, then ΔG°3 = ΔG°1 + ΔG°2.
E: E°3 = E°1 + E°2.
Solution. Answer: (a). ΔG° values are additive, but in this case E° values are not additive (when electron numbers differ, n3E°3 = n1E°1 + n2E°2).
Teacher's Note: Free energies add; potentials add only if n is the same.
Exam Note: Add ΔG°, not E°.
Question Statement-Explanation 10. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: 1 Faraday is the charge that liberates 1 eq. metal at cathode.
E: Passage of 1 Faraday charge through aq. MgCl2 liberates 12 g Mg at cathode.
Solution. Answer: (a). S is correct. In aqueous MgCl2 discharge of H⁺ occurs rather than Mg²⁺, so no magnesium is liberated and E is wrong.
Teacher's Note: Magnesium cannot be deposited from water; hydrogen is liberated.
Exam Note: Aqueous Mg²⁺ is never discharged.
Question Statement-Explanation 11. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Electrolysis involves electronation or de-electronation as a result of passage of current.
E: The species undergoes electronation at anode and other show de-electronation at cathode.
Solution. Answer: (a). S is correct. Electronation (reduction) occurs at the cathode and de-electronation (oxidation) occurs at the anode, so E is reversed and wrong.
Teacher's Note: Cathode gains electrons; anode loses them.
Exam Note: Electronation is at the cathode.
Question Statement-Explanation 12. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Very pure form of iron does not show rusting.
E: Rusting is catalysed by impurities present in iron and H⁺ ions.
Solution. Answer: (d). Both are facts and true; the printed key marks them as both correct with E not the full explanation.
Teacher's Note: Local galvanic cells at impurity sites drive rusting.
Exam Note: Key marks (d): both true.
Question Statement-Explanation 13. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: The cathode of electrolysis of NaCl(aq) on addition of little litmus shows blue colour.
E: At cathode: 2H⁺ + 2e → H2. The reaction at cathode give rise to an increase in pH ranging in alkaline medium and litmus shows blue colour.
Solution. Answer: (c). Removal of H⁺ at the cathode leaves OH⁻ so the cathode region becomes alkaline; litmus turns blue. E correctly explains S.
Teacher's Note: Hydrogen discharge leaves OH⁻ and makes cathode liquid basic.
Exam Note: H⁺ removed, OH⁻ remains: blue litmus.
Question Statement-Explanation 14. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: In concentration cell neither electronation occurs at cathode nor de-electronation occurs at anode.
E: The electrical energy is produced due to decrease in free energy during the transfer of concentration from high to low region.
Solution. Answer: (b). S is wrong: in concentration cells oxidation does occur at the anode and reduction at the cathode, though the net redox change is zero. E is correct.
Teacher's Note: Net chemical change is only transfer of concentration, but electrode processes still occur.
Exam Note: Net redox zero, electrode reactions still occur.
Question Statement-Explanation 15. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: In case of H⁺ and Na⁺ present in a solution discharge of H⁺ is preferred at cathode.
E: The higher is discharge potential of ion, lesser is its tendency to get discharged.
Solution. Answer: (c). The higher the discharge potential, the lesser the tendency to be discharged; H⁺ has the lower discharge potential than Na⁺, so H⁺ is discharged, and E explains S.
Teacher's Note: Ion with the lower discharge potential is discharged first.
Exam Note: H⁺ discharges before Na⁺.
Question Statement-Explanation 16. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Milliequivalent of a metal discharged at cathode during electrolysis = i·t/96.5.
E: This is Faraday's I law of electrolysis.
Solution. Answer: (c). Equivalents = i·t/96500 gives milliequivalents = i·t/96.5. This is Faraday's first law, hence E explains S.
Teacher's Note: First law: mass ∝ charge, here expressed as milliequivalents.
Exam Note: meq = it/96.5.
Question Statement-Explanation 17. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Pt H2/HCl at 25 °C E°H = 0.
E: For primary reference electrode E°H⁺/H = 0.
Solution. Answer: (b). The primary reference electrode is Pt H2(1 atm) | HCl (1 M) at 25 °C, where E°H = 0. The statement S omits the 1 atm and 1 M conditions, so S is wrong; E is correct.
Teacher's Note: E° = 0 holds only for 1 atm H₂ and 1 M H⁺.
Exam Note: State pressure and concentration for zero.
Question Statement-Explanation 18. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: (∂E/∂T)P is called temperature coefficient of e.m.f.
E: (∂E/∂T)P may be +ve, −ve and depends upon heat of reaction.
Solution. Answer: (d). Both are facts. ΔH = nF[T(∂E/∂T)P − E], where (∂E/∂T)P is the temperature coefficient; E is true but is not an explanation of the name.
Teacher's Note: The coefficient's sign depends on ΔS, which links to ΔH.
Exam Note: Name is a definition, E is a fact.
Question Statement-Explanation 19. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Liquid junction potential can be eliminated by putting a salt bridge of KCl.
E: The function of salt bridge is to remove liquid junction potential because the salt used has same speed of cations and anions.
Solution. Answer: (c). K⁺ and Cl⁻ have nearly equal mobilities, so a KCl salt bridge removes liquid junction potential; E explains S.
Teacher's Note: Matched ion speeds stop charge separation at the junction.
Exam Note: K⁺ and Cl⁻ travel at similar speeds.
Question Statement-Explanation 20. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: The electrolytic cells involve conversion of electrical energy into chemical energy.
E: An increase in free energy is responsible for the flow of current.
Solution. Answer: (a). S is correct: in an electrolytic cell electrical energy is given to produce chemical changes. E is wrong: it is the applied external emf, not an increase in free energy, that drives the current.
Teacher's Note: Electrolysis is driven by external source, against ΔG > 0.
Exam Note: Current is forced, not caused by ΔG increase.
Question Statement-Explanation 21. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: During electrolysis of CH3COONa the molar ratio of gases formed at anode and cathode is 2 : 1.
E: Anode: 2CH3COO⁻ → C2H6 + 2CO2 + 2e; Cathode: 2H⁺ + 2e → H2.
Solution. Answer: (b). The molar ratio of gases at anode and cathode is 3 : 1 (C2H6 + 2CO2 to one H2), so S is wrong; the reactions in E are correct.
Teacher's Note: Count total moles of gas at the anode: ethane plus two CO₂.
Exam Note: Ratio is 3 : 1.
Question Statement-Explanation 22. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Electrolysis of CuCl2(aq) gives 1 mole of Cu and 1 mole of Cl2 by the passage of suitable charge.
E: Equal equivalents of Cu and Cl2 are formed during the passage of same charge.
Solution. Answer: (c). Anode: 2Cl⁻ → Cl2 + 2e; cathode: Cu²⁺ + 2e → Cu. Each takes 2 F per mole, so equal equivalents imply equal moles. E explains S.
Teacher's Note: Both Cu and Cl₂ involve two electrons per mole.
Exam Note: Same n gives equal moles.
Question Statement-Explanation 23. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: A copper rod turns colourless solution of ZnSO4 to light blue.
E: Zn reduces Cu²⁺ to Cu.
Solution. Answer: (b). S is wrong: copper does not react with colourless ZnSO4 solution (Zn is more reactive), so no blue colour appears. E is correct: Zn + Cu²⁺ → Zn²⁺ + Cu, i.e. on adding Zn, a blue CuSO4 solution fades.
Teacher's Note: Copper is less reactive than zinc and cannot displace it.
Exam Note: Cu does not displace Zn²⁺.
Question Statement-Explanation 24. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Anode possesses negative polarity in electrochemical cell.
E: Anode is the electrode which shows liberation of electrons and thus electrode acquires negative charge because electrons are left on electrode.
Solution. Answer: (c). The anode loses electrons to the external circuit, and electrons left on the electrode make it negative; E explains S.
Teacher's Note: Oxidation at the anode leaves electrons on the metal.
Exam Note: Galvanic anode is negative.
Question Statement-Explanation 25. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Zinc protects the iron better than tin even after it cracks.
E: E°OP,Zn < E°OP,Fe but E°OP,Sn > E°OP,Fe.
Solution. Answer: (a). S is correct. Actually E°OP,Zn > E°OP,Fe (Zn is oxidised in preference to Fe) and E°OP,Sn < E°OP,Fe, so E as written is wrong.
Teacher's Note: Zn is more easily oxidised than Fe, so it corrodes first as sacrificial metal.
Exam Note: Zn oxidises before iron; tin does not.
Question Statement-Explanation 26. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: A dry cell becomes dead after a long time, even if it has not been used.
E: Reaction of NH4Cl and Zn is spontaneous one.
Solution. Answer: (c). The zinc container slowly reacts spontaneously with NH4Cl even when no current is drawn, so E explains S.
Teacher's Note: Spontaneous side reaction slowly consumes the zinc case.
Exam Note: Zn + NH₄Cl reacts on its own.
Question Statement-Explanation 27. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: The anode of Daniell cell possesses negative polarity.
E: The zinc electrode shows oxidation and thus becomes −vely charged with respect to surrounding solution.
Solution. Answer: (c). Zn → Zn²⁺ + 2e; the electrons remaining on the Zn electrode give it negative polarity. E explains S.
Teacher's Note: Zn loses ions to solution but keeps electrons.
Exam Note: Zinc anode is negative.
Question Statement-Explanation 28. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Rusting of iron is favoured by moist air, CO2 and O2.
E: Purest form of metal is not corroded.
Solution. Answer: (d). Both statements are correct, but E is not the explanation of S.
Teacher's Note: Moisture, CO₂ and O₂ create the electrolyte and oxidant needed for rusting.
Exam Note: Both true, unrelated reasons.
Question Statement-Explanation 29. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Discharge potential of Na⁺ is more than H⁺.
E: E°Na/Na⁺ is lesser than E°H/H⁺.
Solution. Answer: (a). The higher the discharge potential, the lesser the tendency to be discharged; for cations the discharge potential refers to E°OP. S is correct (E°OP,Na = +2.71 V is greater than E°OP,H = 0), but E states the opposite and is wrong.
Teacher's Note: Na has a larger oxidation potential than H, so Na⁺ resists discharge.
Exam Note: E°OP of Na is greater than that of H.
Question Statement-Explanation 30. In each sub question given below a statement (S) and explanation (E); choose the correct answer from the codes (a), (b), (c) and (d): (a) S is correct but E is wrong (b) S is wrong but E is correct (c) Both S and E are correct and E is correct explanation of S (d) Both S and E are correct but E is not correct explanation of S.
S: Discharge potential of Cl⁻ is lesser than OH⁻.
E: E°Cl⁻/Cl < E°H₂O/OH⁻.
Solution. Answer: (b). For anions the discharge potential refers to E°RP, so E°OP,Cl⁻/Cl > E°OP,OH⁻/H₂O is the relevant comparison. As printed, S is wrong and E is correct (key (b)).
Teacher's Note: Anions are compared by oxidation potential at the anode; the key reads this as (b).
Exam Note: Key gives (b): S wrong, E right.
Matching Type Problems
Question Matching 1. Type I (only one match is possible). For a given reaction Fe + 2Fe³⁺ → 3Fe²⁺: (A) E°1 = E°Fe/Fe²⁺ + E°Fe³⁺/Fe (B) E°2 = E°Fe/Fe²⁺ + E°Fe³⁺/Fe²⁺ (C) E°3 = E°Fe/Fe³⁺ + E°Fe³⁺/Fe²⁺; match with (i) n = 2, (ii) n = 3, (iii) n = 6.
Solution. Answer: A—iii; B—i; C—ii. (From the cells of Comprehension 2: Fe|Fe²⁺||Fe³⁺|Fe has n = 6; Fe|Fe²⁺||Fe³⁺,Fe²⁺|Pt has n = 2; Fe|Fe³⁺||Fe³⁺,Fe²⁺|Pt has n = 3.)
Teacher's Note: Electrons transferred depend on which two half-reactions are combined.
Exam Note: Fe/Fe³⁺ pairs give n = 3; Fe³⁺/Fe gives 6.
Question Matching 2. Type II (more than one match is possible). (A) Corrosion (B) Rusting (C) Electrolysis (D) Faraday; with (i) Brown deposits on Fe (ii) Green deposits on Cu (iii) Blackening of Ag coins (iv) Electronation (v) De-electronation (vi) Charge on one mole electron (vii) 96500 C (viii) Electroplating.
Solution. Answer: A—i, ii, iii, iv, v; B—i, iv, v; C—iv, v, viii; D—vi, vii.
Teacher's Note: Corrosion covers all metal decay; rusting is specifically iron.
Exam Note: Rusting is only iron; corrosion is general.
Question Matching 3. Type II. (A) Calomel electrode (B) Ag-AgCl(s) electrode (C) N.H. electrode (D) PtH₂, 2 atm | H⁺ (1 M); with 1. Reversible with respect to Cl⁻ 2. Reversible with respect to H⁺ 3. E° = 0 4. E° varies with KCl molarity 5. Secondary reference electrodes 6. Primary reference electrode.
Solution. Answer: A—1, 4, 5; B—1, 5; C—2, 3, 6; D—2.
Teacher's Note: Calomel and Ag/AgCl are secondary electrodes reversible to chloride; NHE is the primary one.
Exam Note: Hydrogen electrode at 2 atm is not standard.
Question Matching 4. Type II. (A) Zn | Zn²⁺ || Cu²⁺ | Cu (B) Ag | Ag⁺ || H⁺ | H2 (C) Lead storage battery (D) Cd | CdO(s) | KOH(aq) | NiO2(s) | Ni; with 1. Reversible cell 2. Irreversible cell 3. Ecell = +ve 4. Ecell = −ve 5. Redox cells 6. n = 2 7. No liquid junction potential.
Solution. Answer: A—1, 3, 5, 6; B—2, 4, 5, 6; C—1, 3, 5, 6, 7; D—1, 3, 5, 6, 7.
Teacher's Note: Cells with a single electrolyte have no junction potential.
Exam Note: Single electrolyte: no liquid junction potential.
Question Matching 5. Type III (one match from each list). List A: 1 Coulometry, 2 Eudiometry, 3 Potentiometry, 4 Conductometry, 5 Polarimetry. List B: a Electrodeposition, b Combustion in oxygen, c Titration, d Micellization study, e Optical activity. List C: (i) Analysis of a gas sample (ii) Copper voltameter (iii) Optical rotation (iv) Migration of ions (v) Glass electrode.
Solution. Answer: 1–a–ii; 2–b–i; 3–c–v; 4–d–iv; 5–e–iii.
Teacher's Note: Match each method with its process and instrument.
Exam Note: Coulometry: electrodeposition, copper voltameter.
Question Matching 6. The standard reduction potential data at 25 °C is given below [JEE (Advanced) II 2013]: E°(Fe³⁺, Fe²⁺) = +0.77 V; E°(Fe²⁺, Fe) = −0.44 V; E°(Cu²⁺, Cu) = +0.34 V; E°(Cu⁺, Cu) = +0.52 V; E°(O2(g) + 4H⁺ + 4e → 2H2O) = +1.23 V; E°(O2(g) + 2H2O + 4e → 4OH⁻) = +0.40 V; E°(Cr³⁺, Cr) = −0.74 V; E°(Cr²⁺, Cr) = −0.91 V. Match E° of the redox pair in List I with List II. List I: (P) E°(Fe³⁺, Fe) (Q) E°(4H2O ⇌ 4H⁺ + 4OH⁻) (R) E°(Cu²⁺ + Cu → 2Cu⁺) (S) E°(Cr³⁺, Cr²⁺). List II: (1) −0.18 V (2) −0.4 V (3) −0.04 V (4) −0.83 V. Codes: (a) P4 Q1 R2 S3 (b) P2 Q3 R4 S1 (c) P1 Q2 R3 S4 (d) P3 Q4 R1 S2
Solution. Answer: (d) (P→3, Q→4, R→1, S→2). P: 3e + Fe³⁺ → Fe, ΔG° = ΔG°2 + ΔG°3 = −1 × 0.77F − 2 × (−0.44)F = +0.11F, so −3E°F = +0.11F, E° = −0.04 V. Q: 0.40 − 1.23 = −0.83 V. S: Cr³⁺ + 3e → Cr (ΔG°2 = −3 × (−0.74)F) minus Cr²⁺ + 2e → Cr (ΔG°3 = −2 × (−0.91)F): ΔG° = 2.22F − 1.82F = +0.4F, so E° = −0.4 V. R: following the key, E° = −0.18 V (the reaction as a two-electron change: −0.68F + 2 × 0.52F = +0.36F, E° = −0.36/2); note that for a one-electron change E°cell would be −0.36 V.
Teacher's Note: Combine free energies when electron numbers differ, then divide by electrons of the target.
Exam Note: Compute P, S via ΔG; Q = 0.40 − 1.23.
Download P Bahadur Solutions for JEE Math PDF
Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 7 Electrolysis Electrochemical Cells Part 2
Access the complete chapter-wise PDF for P Bahadur Solutions Numerical Chemistry Chapter 7 Electrolysis Electrochemical Cells Part 2. These structured P Bahadur Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your JEE Exam Preparation
Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.