Download JEE Chemistry P Bahadur Textbook Solutions: Chapter 07 Electrolysis Electrochemical Cells
Explore reliable textbook solutions for Chapter 07 Electrolysis Electrochemical Cells tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Access P Bahadur Textbook Answers and Solutions
Navigate directly to the solved Chemistry textbook exercises using the digital viewer below. Each solution includes detailed step-by-step explanations, allowing students to instantly cross-check their work and identify areas requiring further revision.
Chapter 7 Electrolysis And Electrochemical Cells - Numerical Problems 1-118
Model Question
Question. Given: A → A2+ + 2e, E° = +0.76 V; B → B2+ + 2e, E° = +0.44 V. Find out (a) anode of cell (b) cathode of cell (c) reaction at anode (d) reaction at cathode (e) redox change (f) no. of electrons used for redox change (g) direction of flow of electron (h) direction of flow of current (i) E°cell (j) Ecell (k) design of cell.
Solution. The given E° values are oxidation potentials (E°OP), so E°RP of A2+/A = –0.76 V and of B2+/B = –0.44 V. The species with the larger E°OP is oxidised.
(a) Anode: A; (b) cathode: B.
(c) Anode: A → A2+ + 2e. (d) Cathode: B2+ + 2e → B.
(e) Redox change: A + B2+ → A2+ + B. (f) 2 electrons.
(g) Electrons flow from A to B. (h) Current flows from B to A.
(i) E°cell = E°OP(A) + E°RP(B) = +0.76 + (–0.44) = +0.32 V.
(j) Ecell = E°cell + (0.059/2) log([B2+]/[A2+]).
(k) Design: A | A2+ || B2+ | B (oxidation electrode on left, reduction electrode on right, salt bridge between), also written A | A(NO3)2 || B(NO3)2 | B.
Teacher's Note: First decide whether given E° are oxidation or reduction potentials; larger E°OP is the anode.
Exam Note: Show anode on left, cathode on right.
Numerical Problems
Question 1. Calculate the quantity of electricity that will be required to liberate 710 g of Cl2 gas by electrolysing a conc. solution of NaCl. What mass of NaOH and what volume of H2 at 27°C and 1 atm. pressure is obtained during this process?
Solution. 2Cl– → Cl2 + 2e; ECl2 = 71/2 = 35.5. Q = (96500 × w)/E = (96500 × 710)/35.5 = 1930000 C = 20 F.
1 F gives 1 g eq. (40 g) NaOH, so 20 F gives 800 g NaOH.
20 F gives 20 g eq. = 20 g of H2 (10 mol). PV = nRT: V = 10 × 0.0821 × 300 = 246.3 L.
Q = 1.93 × 106 C; NaOH = 800 g; V(H2) = 246.3 L.
Teacher's Note: Convert mass to equivalents first; 1 F frees one equivalent of every product.
Exam Note: Mole-to-faraday link earns marks.
Question 2. How many kJ of energy is expended during the passage of 1 ampere current for 100 sec under a potential of 115 V?
Solution. Energy = charge × potential = (1 × 100) × 115 = 11500 J = 11.5 kJ.
Teacher's Note: Electrical energy = Q × V; convert J to kJ at the end.
Exam Note: Show Q = it first.
Question 3. Find the charge in coulomb on 1 g ion of N3–.
Solution. Charge on one N3– ion = 3 × 1.602 × 10–19 C. Charge on 1 g ion (NA ions) = 3 × 1.602 × 10–19 × 6.023 × 1023 = 2.89 × 105 C.
Teacher's Note: 1 g ion means one mole of ions, so multiply by Avogadro's number.
Exam Note: Do not forget the factor 3.
Question 4. Find out the volume of gases evolved by passing 0.965 A current for 1 hr through an aqueous solution of CH3COONa at 25°C and 1 atm.
Solution. At anode: 2CH3COO– → C2H6 + 2CO2 + 2e; at cathode: 2H+ + 2e → H2.
Equivalents = it/96500 = (0.965 × 3600)/96500 = 0.036.
Moles: C2H6 = 0.036/2 = 0.018, CO2 = 0.036, H2 = 0.036/2 = 0.018; total n = 0.072 mol.
V = nRT/P = 0.072 × 0.0821 × 298/1 = 1.762 L.
Teacher's Note: Kolbe electrolysis gives C2H6 and CO2 at anode, H2 at cathode; add all gas moles.
Exam Note: Write both electrode reactions.
Question 5. A current of 0.5 A is passed through acidulated water for 30 minute. Calculate mass of H2 and O2 evolved. Also calculate the volume of O2 produced at 25°C and 760 mm of Hg if the gas is: (a) dry (b) saturated with water vapour (aqueous tension is 23.0 mm at 25°C).
Solution. E(H2) = 1, E(O2) = 8. w(H2) = (1 × 0.5 × 30 × 60)/96500 = 9.33 × 10–3 g; w(O2) = (8 × 0.5 × 1800)/96500 = 7.46 × 10–2 g.
(a) Dry: PV = (w/M)RT: 1 × V = (7.46 × 10–2/32) × 0.0821 × 298, V = 5.7 × 10–2 L.
(b) P(O2) = 760 – 23 = 737 mm: (737/760) × V = (7.46 × 10–2/32) × 0.0821 × 298, V = 5.88 × 10–2 L.
Teacher's Note: Over water, subtract aqueous tension to get the partial pressure of the gas.
Exam Note: Use 737 mm, not 760 mm, in (b).
Question 6. Calculate the volume of Cl2 at NTP produced during electrolysis of fused MgCl2 which produces 6.50 g Mg. Atomic mass of Mg = 24.3.
Solution. Equivalents of Mg = equivalents of Cl2: 6.5/(24.3/2) = w/35.5, w(Cl2) = 18.99 g. At NTP: 1 × V = (18.99/71) × 0.0821 × 273, V = 5.99 L.
Teacher's Note: Same charge liberates equal equivalents at both electrodes.
Exam Note: Equivalent mass of Mg is 24.3/2.
Question 7. How long would it take to deposit 100 g of Al from an electrolytic cell containing Al2O3 using a current of 125 ampere?
Solution. Al3+ + 3e → Al; E = 27/3 = 9. w = Eit/96500: 100 = (27 × 125 × t)/(3 × 96500), t = 8577.77 s (≈ 2.38 h).
Teacher's Note: Al is trivalent, so E = M/3.
Exam Note: Write n = 3 from the reaction.
Question 8. A metal wire carries a current of 1 ampere. How many electrons pass a point in the wire in one second?
Solution. Charge in 1 s = 1 × 1 = 1 C. 96500 C = 6.023 × 1023 electrons, so 1 C = 6.023 × 1023/96500 = 6.24 × 1018 electrons.
Teacher's Note: 1 A = 1 C/s; divide Avogadro's number by the faraday.
Exam Note: Show Q = it.
Question 9. How long will it take for a uniform current of 6.0 ampere to deposit 78.0 g gold from a solution of AuCl4–? What mass of chlorine gas will be formed simultaneously at the anode of the electrolytic cell?
Solution. AuCl4– + 3e → Au + 4Cl–; anode Cl– → ½Cl2 + e.
w(Au) = Eit/96500: 78.0 = (197/3 × 6 × t)/96500, t = 19104 s.
Eq. of Au = Eq. of Cl2: 78/(197/3) = w/(71/2), w(Cl2) = 42.16 g.
Teacher's Note: Gold(III) takes 3 electrons; equal equivalents of Cl2 form.
Exam Note: Use E = 197/3.
Question 10. An ammeter and copper voltameter are connected in series in an electric circuit through which a constant direct current flows. The ammeter shows 0.525 ampere. If 0.6354 g of Cu is deposited in one hour, what is percentage error of ammeter? Atomic mass of Cu = 63.54.
Solution. Actual current i = (w × 96500)/(E × t) = (0.6354 × 96500)/((63.54/2) × 3600) = 0.536 A.
Error = 0.536 – 0.525 = 0.011 A; % error = (0.011 × 100)/0.536 = 2.05%.
Teacher's Note: The voltameter gives the true current; compare it with the ammeter reading.
Exam Note: Divide the error by the true value.
Question 11. Copper sulphate solution (250 mL) was electrolysed using a platinum anode and a copper cathode. A constant current of 2 mA was passed for 16 minute. It was found that after electrolysis, the absorbance of the solution was reduced to 50% of its original value. Calculate the concentration of copper sulphate in the solution to begin with.
Solution. Equivalents of Cu2+ lost = (2 × 10–3 × 16 × 60)/96500 = 1.989 × 10–5, i.e. moles of Cu2+ = 1.989 × 10–5/2.
This is 50% of the initial amount, so initial moles = 1.989 × 10–5.
[CuSO4] = (1.989 × 10–5 × 1000)/250 = 7.95 × 10–5 M.
Teacher's Note: Absorbance is proportional to concentration, so 50% absorbance means half the Cu2+ was removed.
Exam Note: Convert equivalents to moles by dividing by 2.
Question 12. Calculate the number of electrons lost or gained during electrolysis of: (a) 2 g Cl– ions (b) 1 g Zn2+ ions.
Solution. (a) 2Cl– → Cl2 + 2e. Eq. of Cl– = 2/35.5; 1 eq. = 6.023 × 1023 electrons, so electrons lost = (2/35.5) × 6.023 × 1023 = 3.39 × 1022.
(b) Zn2+ + 2e → Zn. Eq. of Zn2+ = 1/32.7 = 0.0306; electrons gained = 0.0306 × 6.023 × 1023 = 1.84 × 1022 (book prints 1.85 × 1022; the difference is rounding).
Teacher's Note: Electrons = equivalents × NA.
Exam Note: Use equivalent mass, not molar mass.
Question 13. 0.35 mole of electrons were passed through three electrolyte solutions connected in series. If the solutions are of Ag+, Cu2+ and Au3+, calculate the amount of each metal deposited at cathode of each cell.
Solution. 1 mole of electrons deposits 108 g Ag, so 0.35 mol deposits 108 × 0.35 = 37.8 g Ag.
Cu: (63.5/2) × 0.35 = 11.11 g. Au: (197/3) × 0.35 = 22.98 g.
Teacher's Note: Series cells carry equal charge, so equal equivalents deposit.
Exam Note: Divide atomic mass by charge on ion.
Question 14. Same quantity of electricity being used to liberate iodine (at anode) and a metal (at cathode): The mass of metal liberated at cathode is 0.617 g and the liberated iodine completely reduced by 46.3 mL of 0.124 M sodium thiosulphate solution. What is equivalent mass of metal?
Solution. I2 + 2e → 2I–; 2S2O32– → S4O62– + 2e (E of hypo = M/1).
Eq. of metal = Eq. of I2 = Eq. of hypo: 0.617/E = (46.3 × 0.124)/1000, E = 107.47 g eq–1.
Teacher's Note: Thiosulphate is monovalent here, so molarity equals normality.
Exam Note: State that equivalents are equal.
Question 15. Cd amalgam is prepared by electrolysis of a solution of CdCl2 using a mercury cathode. Find how long should a current of 5 ampere be passed in order to prepare 12% Cd-Hg amalgam on a cathode of 2 g mercury? Atomic mass of Cd = 112.40.
Solution. 88 g Hg has 12 g Cd, so 2 g Hg requires (12 × 2)/88 = 0.273 g Cd. Cd2+ + 2e → Cd, E = 112.40/2.
0.273 = (112.4 × 5 × t)/(2 × 96500), t = 93.75 s.
Teacher's Note: 12% amalgam means 12 g Cd per 88 g Hg, not per 100 g Hg.
Exam Note: Mass fraction setup carries the marks.
Question 16. 10 g fairly concentrated solution of CuSO4 is electrolysed using 0.01 Faraday of electricity. Calculate: (a) the mass of resulting solution (b) the no. of equivalents of acid or alkali in solution. Atomic mass of Cu = 63.5.
Solution. (a) Anode: 2H2O → 4H+ + O2 + 4e; cathode: Cu2+ + 2e → Cu.
Mass of O2 = (32 × 0.01 × 96500)/(4 × 96500) = 0.08 g; mass of Cu = (63.5 × 0.01 × 96500)/(2 × 96500) = 0.3175 g.
Mass of resulting solution = 10 – 0.08 – 0.3175 = 9.6025 g.
(b) 1 F produces 1 equivalent of H+, so 0.01 F produces 0.01 equivalent of acid.
Teacher's Note: Solution loses the mass of Cu deposited and O2 evolved.
Exam Note: Acid formed is H2SO4.
Question 17. A test for complete removal of Cu2+ ions from a solution of Cu2+(aq.) is to add NH3(aq.). A blue colour signifies the formation of complex [Cu(NH3)4]2+ having Kf = 1.1 × 1013 and thus confirms the presence of Cu2+ in solution. 250 mL of 0.1 M CuSO4(aq.) is electrolysed by passing a current of 3.512 ampere for 1368 second. After passage of this charge sufficient quantity of NH3(aq.) is added to electrolysed solution maintaining [NH3] = 0.10 M. If [Cu(NH3)4]2+ is detectable upto its concentration as low as 1 × 10–5, would a blue colour be shown by the electrolysed solution on addition of NH3?
Solution. Cu2+ + 4NH3 ⇌ [Cu(NH3)4]2+, Kf = [complex]/([Cu2+][NH3]4).
Initial Cu2+ = 250 × 0.1 = 25 mmol. Removed = (3.512 × 1368 × 1000)/(96500 × 2) = 24.89 mmol. Left = 0.11 mmol; [Cu2+]left = 0.11/250 = 4.4 × 10–4 M.
Since Kf is very high, almost all the remaining Cu2+ forms the complex: [Cu(NH3)4]2+ ≈ 4.4 × 10–4 M, which is greater than the detectable limit 1 × 10–5 M. The solution will show blue colour.
Teacher's Note: Large Kf pushes essentially all leftover Cu2+ into the complex; compare with 10–5 M.
Exam Note: Compute leftover Cu2+ first.
Question 18. A current of 3.7 ampere is passed for 6 hr between Ni electrodes in 0.5 litre of 2 M solution of Ni(NO3)2. What will be the molarity of solution at the end of electrolysis?
Solution. Anode: Ni → Ni2+ + 2e; cathode: Ni2+ + 2e → Ni. Equivalents of Ni2+ formed = equivalents of Ni2+ lost, so there is no change in concentration. The solution remains 2 M.
Teacher's Note: With an attacked (active) Ni electrode, dissolution equals deposition.
Exam Note: Recognise the attacked-electrode case.
Question 19. How much current is necessary to produce hydrogen gas at the rate of 1 cc per second at NTP conditions?
Solution. 1 eq. of H2 = 11200 mL involves 96500 C, so 1 mL H2 involves 96500/11200 = 8.616 C. For 1 mL per second, i = Q/t = 8.616 A.
Teacher's Note: Equivalent volume of H2 at NTP is 11200 mL.
Exam Note: Use 11200 mL per equivalent, not 22400.
Question 20. 3 ampere current was passed through an aqueous solution of an unknown salt of Pd for 1 hour. 2.977 g of Pdn+ was deposited at cathode. Find n. (Atomic mass of Pd = 106.4)
Solution. Pdn+ + ne → Pd; w = Eit/96500: 2.977 = ((106.4/n) × 3 × 1 × 60 × 60)/96500, giving n = 4.
Teacher's Note: Unknown charge appears in E = M/n; solve for n.
Exam Note: Convert 1 hour to 3600 s.
Question 21. A Zn rod weighing 25 g was kept in 100 mL of 1 M CuSO4 solution. After a certain time the molarity of Cu2+ in solution was 0.8. What was molarity of SO42–? What was the mass of Zn rod after cleaning? (Atomic mass of Zn = 65.4)
Solution. Meq. = N × V. Meq. of Cu2+ before reaction = 100 × 1 × 2 = 200; after reaction = 100 × 0.8 × 2 = 160. Meq. of Cu2+ lost = 40 = meq. of Zn dissolved.
(w/(65.4/2)) × 1000 = 40, w(Zn) = 1.308 g. Net mass of Zn rod = 25 – 1.308 = 23.692 g.
Zn → Zn2+ + 2e; Cu2+ + 2e → Cu. No change in molarity of SO42– (it stays 1 M).
Teacher's Note: Zn displaces Cu2+; sulphate is a spectator, so its molarity stays 1 M.
Exam Note: Use meq. lost to get Zn dissolved.
Question 22. Assume that impure copper contains only Fe, Au and Ag as impurities. After passage of 140 ampere for 482.5 sec. the mass of anode decreased by 22.260 g and the cathode increased in mass by 22.011 g. Calculate the percentage of iron and percentage of copper originally present.
Solution. Cathode gain is due to Cu deposition (Cu2+ + 2e → Cu). Anode loss is due to oxidation of the active metals Cu and Fe (Cu → Cu2+ + 2e; Fe → Fe2+ + 2e); Ag and Au fall as anode mud.
Mole of Cu deposited = 22.011/63.5 = 0.3466. Equivalents dissolved at anode = (140 × 482.5)/96500 = 0.70, i.e. 0.35 mol of (Cu + Fe) (both bivalent).
Mole of Fe dissolved = 0.3500 – 0.3466 = 0.0034, mass of Fe = 0.0034 × 56 = 0.190 g. Anode loss 22.260 g contains 22.011 g Cu and 0.190 g Fe.
% Cu = (22.011/22.26) × 100 = 98.88%; % Fe = (0.190/22.26) × 100 = 0.85%.
Teacher's Note: Total charge fixes moles of Cu + Fe oxidised; the cathode gain fixes Cu alone.
Exam Note: Ag and Au do not dissolve; they fall as mud.
Question 23. Chromium metal can be plated out from an acidic solution containing CrO3 according to following equation. CrO3(aq.) + 6H+ + 6e → Cr(s) + 3H2O. Calculate: (a) how many gram of chromium will be plated out by 24000 coulomb? (b) how long will it take to plated out 1.5 g of Cr by using 12.5 ampere current? (IIT 1993)
Solution. Equivalent mass of Cr = 52/6.
(a) 96500 C deposits (52/6) g, so 24000 C deposits (52/6) × (24000/96500) = 2.155 g Cr.
(b) w = Eit/96500: 1.5 = (52 × 12.5 × t)/(6 × 96500), t = 1336.15 s.
Teacher's Note: Cr(VI) takes 6 electrons, so E = 52/6.
Exam Note: Write the 6e half-reaction first.
Question 24. In an electrolysis experiment, current was passed for 5 hour through two cells connected in series. The first cell contains a solution of gold and the second contains CuSO4 solution. 9.85 g of gold was deposited in the first cell. If the oxidation no. of gold is +3, find the amount of Cu deposited on cathode in second cell. Also calculate the current strength in ampere. Atomic mass of Au = 197 and atomic mass of Cu = 63.5.
Solution. Equivalents of Au = equivalents of Cu: 9.85/(197/3) = w(Cu)/(63.5/2), so w(Cu) = 4.763 g.
w = Eit/96500: 4.763 = (63.5 × i × 5 × 60 × 60)/(2 × 96500), i = 0.804 A.
Teacher's Note: Cells in series pass the same charge, so equivalents deposited are equal.
Exam Note: Convert 5 h to 18000 s.
Question 25. An electric current is passed through two solutions of (i) AgNO3 and (ii) a solution of 10 g CuSO4·5H2O crystals in 500 mL H2O, platinum electrodes being used in each case. After 30 minute it is found that 1.307 g Ag has been deposited. What is the conc. of Cu expressed in g of Cu per litre in solution after electrolysis? (Atomic mass of Cu = 63.54, Ag = 108)
Solution. Eq. of Ag deposited = 1.307/108 = 0.0121 = eq. of Cu2+ lost.
Initial eq. of CuSO4·5H2O = (10 × 2)/249.54 = 0.0802.
Eq. of Cu2+ left = 0.0802 – 0.0121 = 0.0681. Mass of Cu2+ left = (0.0681 × 63.54)/2 = 2.164 g in 500 mL.
In 1 litre = 2.164 × 2 = 4.328 g/litre.
Teacher's Note: Subtract the equivalents of Cu deposited from those present, then scale to 1 L.
Exam Note: Remember the crystal's 5H2O in the molar mass.
Question 26. Electrolysis of a solution of MnSO4 in aqueous sulphuric acid is a method for the preparation of MnO2 as per reaction, Mn2+(aq.) + 2H2O(l) → MnO2(s) + 2H+(aq.) + H2(g). Passing a current of 27 A for 24 hours gives one kg of MnO2. What is the value of current efficiency? Write the reaction taking place at the cathode and at the anode. (IIT May 1997)
Solution. w = Eit/96500: 1000 = (87 × i × 24 × 3600)/(2 × 96500), i = 25.68 A (current actually used).
Current efficiency = (25.68/27) × 100 = 95.1%.
Corrected: the book rounds i to 25.6 A and prints 94.8%; the exact value is 25.68 A giving 95.1%.
Anode: Mn2+ + 2H2O → MnO2 + 4H+ + 2e (Mn2+ → Mn4+ + 2e); cathode: 2H+ + 2e → H2.
Teacher's Note: Efficiency = current actually needed for the product ÷ current passed.
Exam Note: Mn2+ → MnO2 is a 2-electron oxidation.
Question 27. A constant current was flown for 2 hour through a KI solution oxidising iodide ion to iodine (2I– → I2 + 2e). At the end of experiment liberated iodine consumed 21.75 mL of 0.0831 M solution of sodium thiosulphate following the redox change I2 + 2S2O32– → 2I– + S4O62–. What is the average rate of current flown in ampere?
Solution. Thiosulphate gives 1 electron per ion, so N = M. Meq. of I2 formed = meq. of hypo = 21.75 × 0.0831 × 1 = 1.807.
w/E = it/96500, so 1.807/1000 = (i × 2 × 60 × 60)/96500, i = 0.0242 A.
Teacher's Note: Titration gives equivalents of I2, which equals charge/96500.
Exam Note: Convert 2 h to 7200 s.
Question 28. 50 mL of 0.1 M CuSO4 solution is electrolysed using Pt electrodes with a current of 0.965 ampere for a period of 1 minute. Assuming that volume of solution does not change during electrolysis, calculate [Cu2+], [H+] and [SO42–] after electrolysis. What will be the concentration of each species if current is passed using Cu electrodes?
Solution. Meq. of CuSO4 = 50 × 0.1 × 2 = 10. Anode: 2H2O → 4H+ + O2 + 4e; cathode: Cu2+ + 2e → Cu.
Equivalents of Cu2+ lost = equivalents of H+ formed = (0.965 × 1 × 60)/96500 = 6 × 10–4, i.e. 0.6 meq.
Meq. of Cu2+ left = 10 – 0.6 = 9.4; [Cu2+] = 9.4/(50 × 2) = 0.094 M. [H+] = 0.6/50 = 0.012 M. [SO42–] = 0.1 M (does not take part in the redox change).
With Cu electrodes (Cu2+ + 2e → Cu at cathode; Cu → Cu2+ + 2e at anode) there is no change in the molarity of the electrolyte: [Cu2+] = [SO42–] = 0.1 M.
Teacher's Note: Pt electrodes: Cu2+ falls and H+ rises; Cu electrodes leave concentrations unchanged.
Exam Note: Meq. of Cu2+ lost equals meq. of H+ formed.
Question 29. An electric current is passed through two electrolytic cells connected in series, one containing AgNO3(aq.) and other H2SO4(aq.). What volume of O2 measured at 25°C and 750 mm in Hg would be liberated from H2SO4 if: (a) 1 mole of Ag+ are deposited from AgNO3 solution? (b) 8 × 1022 ions of Ag+ are deposited from AgNO3 solution?
Solution. (a) Eq. of O2 = eq. of Ag = 1, so w(O2) = 8 g. PV = (w/M)RT with T = 298 K, P = 750/760 atm: V = (8/32) × 0.0821 × 298 × (760/750) = 6.20 L.
(b) Eq. of Ag = (8 × 1022)/(6.023 × 1023) = 0.133; w(O2) = 8 × 0.133 = 1.064 g. V = (1.064/32) × 0.0821 × 298 × (760/750) = 0.824 L.
Teacher's Note: Equal equivalents of Ag and O2; E(O2) = 8.
Exam Note: Convert 750 mm to atm before using R = 0.0821.
Question 30. In a fuel cell H2 and O2 react to produce electricity. In the process H2 gas is oxidized at the anode and O2 at cathode. If 67.2 litre of H2 at STP reacts in 15 minutes, what is average current produced? If the entire current is used for electro deposition of Cu from Cu2+, how many gram of Cu deposited?
Solution. Mole of H2 = 67.2/22.4 = 3; eq. of H2 used = 3 × 2 = 6.
w/E = it/96500: 6 = (i × 15 × 60)/96500, i = 643.33 A.
Eq. of Cu deposited = 6, so w(Cu) = 6 × 63.5/2 = 190.5 g.
Teacher's Note: Each mole of H2 gives 2 faradays.
Exam Note: Time must be in seconds (900 s).
Question 31. A 200 W, 110 V incandescent lamp is connected in series with an electrolytic cell of negligible resistance containing a solution of ZnCl2. What mass of Zn will be deposited from the solution on passing current for 30 minutes? (Atomic mass of Zn = 65.4)
Solution. Watt = ampere × volt, so i = 200/110 A.
w = Eit/96500 = (65.4 × (200/110) × 30 × 60)/(2 × 96500) = 1.109 g.
Teacher's Note: Power rating gives current via P = VI.
Exam Note: Zn is bivalent.
Question 32. By passing a certain amount of charge through NaCl solution, 9.2 litre of Cl2 were liberated at STP. When the same charge is passed through a nitrate solution of metal M, 7.467 g of the metal was deposited. If the specific heat of metal is 0.216 cal/g, what is formula of metal nitrate?
Solution. Dulong–Petit: sp. heat × atomic mass = 6.4, so atomic mass = 6.4/0.216 = 29.63 (approximate).
Eq. of metal = eq. of Cl2: 7.467/(29.63/n) = (9.2 × 71)/(22.4 × 35.5) (22.4 L Cl2 weighs 71 g; E(Cl2) = 35.5).
n = 3.25, so n = 3 (an integer). The metal nitrate is M(NO3)3.
Teacher's Note: Specific heat gives approximate atomic mass (Dulong–Petit); valency must be a whole number.
Exam Note: Round n to the nearest integer.
Question 33. An oxide of metal (atomic mass = 112) contains 12.5% O2 by mass. The oxide was converted into chloride by treatment with HCl and electrolysed. Calculate the amount of metal that would be deposited at cathode if a current of 0.965 ampere was passed for a period of 5 hr. What is valency of metal?
Solution. Eq. of O2 = eq. of metal: 12.5/8 = 87.5/E, E(metal) = 56. Valency = 112/56 = 2.
w = Eit/96500 = (56 × 5 × 60 × 60 × 0.965)/96500 = 10.08 g.
Teacher's Note: Percentage composition gives equivalent mass via the equivalent of oxygen (8).
Exam Note: Valency = atomic mass ÷ equivalent mass.
Question 34. A current of 3 ampere was passed for 2 hour through a solution of CuSO4. 3 g of Cu2+ ions were discharged at cathode. Calculate current efficiency. (atomic mass of Cu = 63.5)
Solution. w = Eit/96500: 3 = (63.5 × i × 2 × 60 × 60)/(2 × 96500), i = 1.266 A (current used for deposition).
Current efficiency = (1.266/3) × 100 = 42.2%.
Teacher's Note: Efficiency = current needed for actual product ÷ total current passed.
Exam Note: Do not invert the ratio.
Question 35. An aqueous solution of NaCl on electrolysis gives H2(g), Cl2(g) and NaOH according to reaction: 2Cl–(aq) + 2H2O → 2OH–(aq) + H2(g) + Cl2(g). A direct current of 25 ampere with a current efficiency of 62% is passed through 20 litre of NaCl solution (20% by mass). Assume no loss in volume due to evaporation. (a) Write down the reactions taking place at the electrodes. (b) How long will it take to produce 1 kg of Cl2? (c) What will be the molarity of solution with respect to OH–? (IIT 1992)
Solution. (a) Anode: 2Cl– → Cl2 + 2e. Cathode: 2e + 2H2O → 2OH– + H2.
(b) Effective current = 25 × 62/100 = 15.5 A. 103 = (35.5 × 15.5 × t)/96500, t = 175374.83 s = 48.71 h.
(c) Eq. of OH– = eq. of Cl2 = 103/35.5 = 28.17 (monovalent, so 28.17 mol). [OH–] = 28.17/20 = 1.408 mol L–1.
Teacher's Note: Only the 62% efficient part of the current makes product; OH– equals Cl2 equivalents.
Exam Note: Use effective current 15.5 A in (b).
Question 36. A current of 1.70 A is passed through 300 mL of 0.160 M solution of ZnSO4 for 230 sec. with a current efficiency of 90%. Find the molarity of Zn2+ after the deposition of Zn. Assume the volume of the solution remains constant during electrolysis. (IIT 1991)
Solution. Effective current = 1.70 × 90/100 A. Eq. of Zn2+ lost = (1.70 × 90 × 230)/(100 × 96500) = 3.646 × 10–3, i.e. 3.646 meq.
Initial meq. of Zn2+ = 300 × 0.160 × 2 = 96. Meq. left = 96 – 3.646 = 92.354.
[ZnSO4] = 92.354/(2 × 300) = 0.154 M.
Teacher's Note: Scale current by efficiency before using Faraday's law.
Exam Note: Normality = 2 × molarity for Zn2+.
Question 37. 19 g fused SnCl2 was electrolysed using inert electrodes. 0.119 g Sn was deposited at cathode. If nothing was given out during electrolysis, calculate the ratio of mass of SnCl2 and SnCl4 in fused state after electrolysis. (Atomic mass of Sn = 119)
Solution. Anode: 2Cl– → Cl2 + 2e; cathode: Sn2+ + 2e → Sn. Since nothing is given out, Cl2 reacts with SnCl2: SnCl2 + Cl2 → SnCl4.
Eq. of SnCl2 lost by electrolysis = eq. of Sn = 0.119/(119/2) = 2 × 10–3 = eq. of Cl2 = eq. of SnCl4 formed.
Total loss of SnCl2 = 2 × 10–3 + 2 × 10–3 = 4 × 10–3 eq. Initial eq. = 19/(190/2) = 0.2; left = 0.2 – 0.004 = 0.196.
Mass of SnCl2 left = 0.196 × 190/2 = 18.62 g; mass of SnCl4 = 0.002 × 261/2 = 0.261 g.
Ratio = 18.62/0.261 = 71.34.
Teacher's Note: Cl2 is consumed by SnCl2, so SnCl2 is lost twice over.
Exam Note: Count both the electrolysed and the chlorinated SnCl2.
Question 38. After electrolysis of a sodium chloride solution with inert electrodes for a certain period of time, 600 mL of the 1 N solution was left which was found to be NaOH. During the same time 31.80 g Cu was deposited in the copper voltameter in series with the electrolytic cell. Calculate the % of NaOH obtained. (Atomic mass of Cu = 63.6)
Solution. Eq. of Cu deposited = 31.8/(63.6/2) = 1, so eq. (meq. = 1000) of NaOH should form theoretically.
Experimental yield of meq. of NaOH = 600 × 1 = 600.
% yield = (600/1000) × 100 = 60%.
Teacher's Note: Same charge gives equal equivalents of Cu and NaOH; compare actual with theoretical.
Exam Note: Actual ÷ theoretical equivalents.
Question 39. Per disulphuric acid (H2S2O8) can be prepared by electrolytic oxidation of H2SO4 as 2H2SO4 → H2S2O8 + 2H+ + 2e. Oxygen and hydrogen are byproducts. In such an electrolysis 9.72 litre of H2 and 2.35 litre of O2 were generated at STP. What is the mass of H2S2O8 formed?
Solution. Anode: (i) 2H2SO4 → H2S2O8 + 2H+ + 2e; (ii) 2H2O → 4H+ + O2 + 4e. Cathode: 2H2O + 2e → 2OH– + H2.
Eq. of H2S2O8 + eq. of O2 = eq. of H2.
Eq. of H2 = (2 × 9.72)/22.4 = 0.868; eq. of O2 = (4 × 2.35)/22.4 = 0.42.
Eq. of H2S2O8 = 0.868 – 0.420 = 0.448; mass = 0.448 × 194/2 = 43.456 g.
Teacher's Note: Cathode equivalents equal total anode equivalents; subtract the O2 share.
Exam Note: Eq. mass of H2S2O8 is 194/2.
Question 40. An acidic solution of Cu2+ salt containing 0.4 g of Cu2+ is electrolysed until all the Cu is deposited. The electrolysis is continued for seven minutes more with the volume of solution kept at 100 mL and the current at 1.2 ampere. Calculate volume of gases evolved at NTP during entire electrolysis. (Atomic mass of Cu = 63.6)
Solution. Part I: anode 2H2O → 4H+ + O2 + 4e; cathode Cu2+ + 2e → Cu. Eq. of O2 = eq. of Cu = (0.4 × 2)/63.6 = 12.58 × 10–3.
Part II (water electrolysed): anode 2H2O → 4H+ + O2 + 4e; cathode 2H2O + 2e → H2 + 2OH–. Eq. of H2 = eq. of O2 = (1.2 × 7 × 60)/96500 = 5.22 × 10–3.
Total eq. of O2 = 17.8 × 10–3; at NTP 4 eq. of O2 = 22.4 L, so V(O2) = (22.4 × 17.8 × 10–3)/4 L = 99.68 mL. 2 eq. of H2 = 22.4 L, so V(H2) = (22.4 × 5.22 × 10–3)/2 L = 58.46 mL.
Total volume of O2 + H2 = 158.14 mL.
Teacher's Note: Stage 1 evolves only O2; stage 2 evolves both H2 and O2 from water.
Exam Note: Equivalent volumes: O2 5600 mL, H2 11200 mL.
Question 41. Calculate the quantity of electricity that would be required to reduce 12.3 g of nitrobenzene to aniline, if current efficiency is 50%. If the potential drops across the cell is 3.0 volt, how much energy will be consumed? (IIT 1990)
Solution. C6H5NO2 + 6H+ + 6e → C6H5NH2 + 2H2O; eq. mass of nitrobenzene = 123/6. With 50% efficiency the effective current is 50i/100.
12.3 = (123/6) × i × t × 50/(100 × 96500), so it = 115800 C.
Energy = Q × V = 115800 × 3 = 347.4 kJ.
Teacher's Note: Nitro to amine is a 6-electron reduction; divide by efficiency to get total charge.
Exam Note: Energy = charge × voltage.
Question 42. Calculate the quantity of electricity required to reduce 6.15 g of nitrobenzene to aniline if the current efficiency is 68 per cent. If potential drops across the cell is 7.0 volt, calculate the energy consumed in the process.
Solution. Answer (from book): quantity of electricity = 42573.5 C; energy = 298.014 kJ. Check: charge at 100% efficiency = (6.15/(123/6)) × 96500 = 28950 C; divided by 0.68 gives 42573.5 C; energy = 42573.5 × 7 = 298.0 kJ.
Teacher's Note: Same method as the previous problem: 6 F per mole, divide by efficiency.
Exam Note: Efficiency below 100% needs more charge.
Question 43. In the manufacture of Al, Al2O3 is dissolved in Na3AlF6 at 300 K and electrolysed between Al and carbon electrodes following the net reaction, 2Al2O3(solution) + 3C → 4Al(l) + 3CO2(g). Write the reaction of each electrode. Calculate the minimum voltage required between the electrodes if the Gibbs free energy change for the above reaction is –1370 kJ mol–1.
Solution. Cathode: 4Al3+ + 12e → 4Al; anode: 3C + 6O2– → 3CO2 + 12e (book writes 2Al3+ + 12e → 4Al0 and 3C → 3C4+ + 12e). Number of electrons in the overall change = 12.
–ΔG° = nFE°: 1370 × 103 = 12 × 96500 × E°, E° = 1.183 V (book prints 1.1830 V).
Teacher's Note: Balance electrons for the net reaction (12 e–), then ΔG = –nFE.
Exam Note: State n = 12 explicitly.
Question 44. During the discharge of a lead storage battery, the density of sulphuric acid fell from 1.294 g mL–1 to 1.139 g mL–1. Sulphuric acid of density 1.294 g mL–1 is 39% by mass and that of density 1.139 g mL–1 is 20% by mass. The battery holds 3.5 litre of the acid and the volume practically remained constant during the discharge. Calculate the no. of ampere hour for which the battery must have been used. The charging and discharging reactions are: charging Pb + SO42– → PbSO4 + 2e; discharging PbO2 + 4H+ + SO42– + 2e → PbSO4 + 2H2O
Solution. Overall discharge: Pb + PbO2 + 4H+ + 2SO42– → 2PbSO4 + 2H2O (2 electrons, 2 H2SO4 used, so 1 mol H2SO4 per faraday; N = M).
Before: M = (39 × 1.294 × 1000)/(98 × 100) = 5.15; moles in 3.5 L = 18.025.
After: M = (20 × 1.139 × 1000)/(98 × 100) = 2.325; moles = 8.1375.
Moles (equivalents) of H2SO4 used = 18.025 – 8.1375 = 9.8875.
w/E = it/96500: it = 9.8875 × 96500 = 954143.75 A s = 265.04 A h.
Teacher's Note: Each mole of H2SO4 consumed corresponds to 1 faraday; get moles from % w/w and density.
Exam Note: Convert A s to A h by dividing by 3600.
Question 45. A lead storage cell is discharged which causes the H2SO4 electrolyte to change from a concentration of 34.6% by mass (density 1.261 g mL–1 at 25°C) to one of 27% by mass. The original volume of electrolyte is one litre. How many Faraday have left the anode of battery? Note that the water is produced by the cell reaction as H2SO4 is used up. Overall reaction is: Pb(s) + PbO2 + 2H2SO4(l) → 2PbSO4(s) + 2H2O
Solution. Before electrolysis: mass of solution = 1000 × 1.261 = 1261 g; mass of H2SO4 = (34.6 × 1261)/100 = 436.306 g; water = 824.694 g.
Let X g of H2O form. Moles of H2O formed = X/18 = moles of H2SO4 used, so mass of H2SO4 used = 98X/18 = 5.44X g.
New solution mass = 1261 + X – 5.44X. % by mass: (436.306 – 5.44X)/(1261 + X – 5.44X) = 27/100, giving X = 22.59 g, i.e. 22.59/18 mole of H2O.
2 H2O form per 2 electrons, so 1 mole of H2O forms per faraday: charge = 22.59/18 = 1.255 Faraday.
Teacher's Note: Set up an unknown water mass X; each faraday forms one mole of water and uses one mole of H2SO4.
Exam Note: Solution mass changes by +water formed – acid used.
Question 46. The electrolytic reduction of 300 mL of 0.01 M nitroalkane was carried out in acidic buffer medium of pH 5.0 following the change: RNO2 + 4H3O+ + 4e → RNHOH + 5H2O. If the total concentration of weak acid and its conjugate base in each compartment was 0.50 M, calculate the pH of solution after completion of reduction. Ka for weak acid is 1.8 × 10–5.
Solution. Meq. of RNO2 = 300 × 0.01 × 4 = 12, so meq. of H+ consumed = meq. of OH– generated = 12.
Let a mol HA and b mol A–: a + b = 0.50 and pH = –log Ka + log(b/a): 5.0 = 4.745 + log(b/a), b/a = 1.8, a = 0.1786 (178.6 meq.), b = 0.3214 (321.4 meq.).
OH– generated converts HA to A–: HA = 178.6 – 12 = 166.6 meq.; A– = 321.4 + 12 = 333.4 meq.
pH = 4.745 + log(333.4/166.6) = 4.745 + 0.301 = 5.046 (book prints 5.0455 using pKa = 4.7442).
Teacher's Note: Consumed H+ shifts acid into base form; use the Henderson equation before and after.
Exam Note: Use pKa = –log(1.8 × 10–5) = 4.745.
Question 47. Two litre solution of a buffer mixture containing 1.0 M NaH2PO4 and 1.0 M Na2HPO4 is placed in two compartments (one litre in each) of an electrolytic cell. The platinum electrodes are inserted in each compartment and 1.25 ampere current is passed for 212 minute. Assuming electrolysis of water only at each compartment, what will be pH in each compartment after passage of above charge? (pKa for H2PO4– = 2.15)
Solution. Cathode: 2H+ + 2e → H2; anode: 2OH– → H2O + 2e + ½O2. Equal equivalents of H+ and OH– are discharged at the two electrodes.
w/E = it/96500 = (1.25 × 212 × 60)/96500 = 0.165 mol per litre.
Anode compartment: [H+] rises by 0.165 M: HPO42– + H+ → H2PO4–, giving HPO42– = 0.835 and H2PO4– = 1.165. pH = 2.15 + log(0.835/1.165) = 2.005.
Cathode compartment: [OH–] rises by 0.165 M: H2PO4– + OH– → HPO42– + H2O, giving H2PO4– = 0.835 and HPO42– = 1.165. pH = 2.15 + log(1.165/0.835) = 2.295.
Teacher's Note: Anode adds acid, cathode adds base; apply the Henderson equation to the shifted buffer ratio.
Exam Note: Check which compartment gets H+.
Question 48. The density of copper is 8.94 g mL–1. Find out the number of coulomb needed to plate an area of 10 × 10 cm2 to a thickness of 10–2 cm using CuSO4 solution as electrolyte. (Atomic mass of Cu = 63.6)
Solution. Volume of Cu2+ deposited on plate = area × thickness = 10 × 10 × 10–2 = 1 cm3; mass = 1 × 8.94 g.
w = EQ/96500: 8.94 = (63.6 × Q)/(2 × 96500), Q = 27129.2 C.
Teacher's Note: Mass = density × (area × thickness); Cu2+ needs 2 F per mole.
Exam Note: Use E = 63.6/2.
Question 49. How many grams of silver could be plated out on a serving tray by electrolysis of solution containing silver in +1 oxidation state for a period of 8.0 hour at a current of 8.46 ampere? What is the area of the tray if the thickness of the silver plating is 0.00254 cm? (Density of silver is 10.5 g/cm3). (IIT July 1997)
Solution. w(Ag) = Eit/96500 = (107.8 × 8.46 × 8 × 60 × 60)/96500 = 272.18 g.
Volume of Ag = 272.18/10.5 = 25.92 mL (cm3). Area = volume/thickness = 25.92/0.00254 = 1.02 × 104 cm2.
Teacher's Note: Volume = mass/density; area = volume/thickness.
Exam Note: Convert 8 hours to seconds.
Question 50. A current of 40 microampere is passed through a solution of AgNO3 for 32 minutes using Pt electrodes. A uniform single atom thick layer of Ag is deposited covering 43% cathode surface. What is the total surface area of cathode if each Ag atom covers 5.4 × 10–16 cm2?
Solution. w(Ag) = Eit/96500 = (108 × 40 × 10–6 × 32 × 60)/96500 = 8.595 × 10–5 g (book writes 85.95 × 10–6 g).…(1)
Let total area of cathode be a cm2. Covered area = 43a/100; number of Ag atoms = 43a/(100 × 5.4 × 10–16); mass of these atoms = (43a × 108)/(100 × 5.4 × 10–16 × 6.023 × 1023).…(2)
Equating (1) and (2): a ≈ 602 cm2 (book prints 601.65 cm2; the difference is rounding).
Teacher's Note: Link deposited mass to atom count via NA, then to area via 5.4 × 10–16 cm2 per atom.
Exam Note: Only 43% of area is covered.
Question 51. Calculate emf of half cells given below: (a) PtH2 | HCl (H2 at 2 atm, a = 0.02), E°OP = 0 V (b) Fe | FeSO4 (a = 0.1), E°OP = 0.44 V (c) PtCl2 | HCl (Cl2 at 10 atm, a = 0.1), E°OP = –1.36 V
Solution. (a) H2 → 2H+ + 2e: EOP = E° – (0.059/2) log([H+]2/PH2) = 0 – 0.0295 log((0.02)2/2) = +0.109 V.
(b) Fe → Fe2+ + 2e: EOP = 0.44 – (0.059/2) log[Fe2+] = 0.44 – 0.0295 log 0.1 = +0.4695 V.
(c) 2Cl– → Cl2 + 2e: EOP = –1.36 – (0.059/2) log(PCl2/[Cl–]2) = –1.36 – 0.0295 log(10/(0.1)2) = –1.4485 V.
Teacher's Note: Write the oxidation half-reaction, then put products/reactants in the Nernst Q correctly.
Exam Note: Gas partial pressure appears as P, not concentration.
Question 52. Calculate the pH of the following half cells solutions: (a) PtH2 (1 atm) | HCl, E = 0.25 V (b) PtH2 (1 atm) | H2SO4, E = 0.3 V (c) A solution containing 4.5 mM of Cr2O72– and 15 mM of Cr3+ shows a pH of 2.0. Calculate the potential of this half reaction. (Standard potential of the reaction Cr2O72– → Cr3+ is 1.33 V.) (Roorkee 2001)
Solution. (a) H2 → 2H+ + 2e: 0.25 = 0 – (0.059/2) log[H+]2, so –log[H+] = 4.237, pH = 4.237.
(b) Similarly, pH = 5.08 (0.3/0.059). (No change in calculation if any strong acid producing H+ is given.)
(c) Cr2O72– + 14H+ + 6e → 2Cr3+ + 7H2O: E = 1.33 + (0.059/6) log([Cr2O72–][H+]14/[Cr3+]2) = 1.33 + (0.059/6) log[(4.5 × 10–3 × (10–2)14)/(15 × 10–3)2] = 1.33 + (0.059/6) log(20 × 10–28) = 1.33 – 0.26 = 1.07 V.
Teacher's Note: E of a hydrogen half cell at 1 atm depends only on pH: EOP = –0.059 log[H+] = 0.059 pH.
Exam Note: In (c), [H+]14 dominates the log term.
Question 53. Consider the reaction: 2Ag+ + Cd → 2Ag + Cd2+. The standard reduction potential of Ag+–Ag and Cd2+–Cd couples are +0.80 and –0.40 volt respectively. (a) What is the standard cell emf, E°? (b) Will the total emf of the reaction be more +ve or –ve, if conc. of Cd2+ is 0.10 M rather than 1 M?
Solution. (a) Ag+ is reduced and Cd is oxidised: E°cell = E°OP(Cd/Cd2+) + E°RP(Ag+/Ag) = +0.40 + 0.80 = 1.2 V.
(b) Ecell = E° + (0.059/2) log([Ag+]2/[Cd2+]). Reducing [Cd2+] from 1 M to 0.1 M makes the log term positive, so Ecell becomes more positive (about 1.23 V).
Teacher's Note: Lower product concentration raises the cell emf (Le Chatelier in Nernst form).
Exam Note: Q = [Cd2+]/[Ag+]2 decreases.
Question 54. Calculate the values for cell Zn | Zn2+(aq.) || Cu2+(aq.) | Cu (i) cell reaction and (ii) emf of cell if Zn2+ and Cu2+ are 1 M each, (iii) the minimum concentration of Cu2+ at which the cell reaction Zn + Cu2+(aq.) → Zn2+(aq.) + Cu will be spontaneous if Zn2+ is 1 M (iv) does the displacement of Cu2+(aq.) by Zn goes to completion. Given, E°RP Cu2+/Cu = +0.34 V; E°RP Zn2+/Zn = –0.76 V
Solution. (i) E°OP for Cu/Cu2+ = –0.34 V and for Zn/Zn2+ = +0.76 V; Zn has the larger E°OP so it is oxidised. Anode: Zn → Zn2+ + 2e; cathode: Cu2+ + 2e → Cu. Cell reaction: Zn + Cu2+ → Zn2+ + Cu.
(ii) E°cell = 0.76 + 0.34 = 1.10 V (book prints 1.11 V).
(iii) Ecell = 1.10 + (0.059/2) log([Cu2+]/[Zn2+]) must be positive: log[Cu2+] > –1.10 × 2/0.059 = –37.3, so [Cu2+] > about 5 × 10–38 M (book, using 1.11 V: > 2.36 × 10–38 M).
(iv) Yes, the displacement goes almost to completion.
Teacher's Note: Spontaneity requires Ecell > 0; large E° means an enormous K.
Exam Note: Use E°OP of the species being oxidised.
Question 55. Two students use same stock solution of ZnSO4 and a solution of CuSO4. The emf of one cell is 0.03 V higher than the other. The conc. of CuSO4 in the cell with higher emf value is 0.5 M. Find out the conc. of CuSO4 in the other cell (2.303RT/F = 0.06). (IIT 2003)
Solution. Cell I: Ecell = E° + (0.06/2) log(C2/C1) with C2 = 0.5 M; cell II: E′cell = E° + (0.06/2) log(C′2/C1), same [Zn2+] = C1.
Ecell – E′cell = 0.03 = (0.06/2) log(0.5/C′2), so log(0.5/C′2) = 1 and C′2 = 0.05 M.
Teacher's Note: Subtract the two Nernst equations so E° and [Zn2+] cancel.
Exam Note: Higher emf means higher [Cu2+].
Question 56. A graph is plotted between Ecell and log10([Zn2+]/[Cu2+]). The curve was linear with intercept on Ecell axis equal to 1.10 V. Calculate Ecell for Zn | Zn2+ (0.1 M) || Cu2+ (0.01 M) | Cu
Solution. Ecell = E° – (0.059/2) log([Zn2+]/[Cu2+]) is a straight line y = c + mx, so E°cell = intercept = 1.10 V.
Ecell = 1.10 + (0.059/2) log(0.01/0.1) = 1.10 – 0.0295 = 1.0705 V.
Teacher's Note: Intercept at log term zero is E°.
Exam Note: Quotient is [Zn2+]/[Cu2+] = 10.
Question 57. If NO3– → NO2 (acidic medium); E° = 0.790 V and NO3– → NH2OH (acidic medium); E° = 0.731 V. At what pH the above two half reactions will have same E values? Assume the concentrations of all the species to the unity.
Solution. 2H+ + NO3– + e → NO2 + H2O (E° = 0.790); 7H+ + NO3– + 6e → NH2OH + 2H2O (E° = 0.731).
Equal E: 0.790 + (0.059/1) log[H+]2 = 0.731 + (0.059/6) log[H+]7, i.e. 0.790 + 0.118 log[H+] = 0.731 + 0.0688 log[H+].
–log[H+] = 0.059/0.0492 = 1.1992, so pH = 1.1992 (≈ 1.20).
Teacher's Note: Equate the two Nernst expressions; the exponents of [H+] over n set the slopes.
Exam Note: Write both balanced half-reactions first.
Question 58. The following electrochemical cell has been set up. Pt(I) | Fe3+, Fe2+ (a = 1) || Ce4+, Ce3+ (a = 1) | Pt(II). E°Fe3+/Fe2+ = 0.77 V and E°Ce4+/Ce3+ = 1.61 V. If an ammeter is connected between the two platinum electrodes, predict the direction of flow of current. Will the current increase or decrease with time? (IIT 2000)
Solution. Ecell = EOP(Fe2+/Fe3+) + ERP(Ce4+/Ce3+) = –0.77 + 1.61 = 0.84 V (positive).
Pt(I) (Fe2+ → Fe3+) is the anode and Pt(II) (Ce4+ → Ce3+) is the cathode. Electrons flow from left to right, so current flows from right to left (Pt(II) to Pt(I)). As the reaction proceeds the reactant concentrations fall and Ecell falls, so the current will decrease with time.
Teacher's Note: Conventional current is opposite to electron flow; emf falls as the cell discharges.
Exam Note: Name anode and cathode before direction.
Question 59. The standard oxidation potential of Ni / Ni2+ electrode is 0.236 V. If this is combined with a hydrogen electrode in acid solution, at what pH of the solution will the measured emf be zero at 25°C? (Assume [Ni2+] = 1 M and PH2 = 1 atm)
Solution. Ni → Ni2+ + 2e (E°OP = 0.236); 2H+ + 2e → H2 (E°RP = 0). E°cell = 0.236 V.
Ecell = E° + (0.059/2) log([H+]2/[Ni2+]): 0 = 0.236 + 0.059 log[H+], so –log[H+] = 4, pH = 4.
Teacher's Note: Set Ecell = 0 in the Nernst equation and solve for [H+].
Exam Note: 0.236/0.059 = 4.
Question 60. Calculate the equilibrium constant for the reaction: Fe2+ + Ce4+ ⇌ Fe3+ + Ce3+. Given, E°Ce4+/Ce3+ = 1.44 V and E°Fe3+/Fe2+ = 0.68 V (IIT July 1997)
Solution. E°cell = E°OP(Fe2+/Fe3+) + E°RP(Ce4+/Ce3+) = –0.68 + 1.44 = 0.76 V.
E°cell = (0.059/1) log Kc: log Kc = 0.76/0.059 = 12.8814, Kc = 7.6 × 1012.
Teacher's Note: n = 1 here; Kc = 10nE°/0.059.
Exam Note: Flip the sign of E° for the oxidised couple.
Question 61. Calculate the equilibrium constant for the reaction, 2Fe3+ + 3I– ⇌ 2Fe2+ + I3–. The standard reduction potentials in acidic conditions are 0.77 and 0.54 V respectively for Fe3+/Fe2+ and I3–/I– couples. (IIT 1998)
Solution. E°cell = E°RP(Fe3+/Fe2+) + E°OP(I–/I3–) = 0.77 – 0.54 = 0.23 V. n = 2 (2Fe3+ + 2e → 2Fe2+).
0.23 = (0.059/2) log Kc, so log Kc = 7.797 and Kc = 6.26 × 107.
Teacher's Note: Use n = 2 for the balanced reaction.
Exam Note: Electrons exchanged equal 2, not 1.
Question 62. Find the equilibrium constant for the reaction: In2+ + Cu2+ → In3+ + Cu+ at 298 K. Given, E°Cu2+/Cu+ = 0.15 V, E°In3+/In+ = –0.42 V, E°In2+/In+ = –0.40 V (IIT 2004)
Solution. In3+ + 2e → In+ (E°1 = –0.42 V); In2+ + e → In+ (E°2 = –0.40 V). Subtract (2) from (1) to get the third half-cell: In3+ + e → In2+, E°3 = 2(–0.42) – 1(–0.40) = –0.44 V (free energies add, not potentials).
Net change: Cu2+ + In2+ → Cu+ + In3+; E°cell = 0.15 + 0.44 = 0.59 V (n = 1).
0.59 = 0.059 log Kc, Kc = 1010.
Teacher's Note: Combine half-reactions through ΔG (nE), not by adding E° directly.
Exam Note: Show E° for In3+/In2+ = –0.44 V.
Question 63. Construct a cell in which the disproportionation reaction 2CuCl → CuCl2 + Cu takes place. Also calculate the equilibrium constant for the reaction if Cu2+/Cu+ and Cu+/Cu are 0.153 V and 0.518 V respectively.
Solution. Cell: Pt | CuCl | CuCl2 | Pt (Cu+ oxidised at the anode, Cu+ reduced at the cathode).
Anode: Cu+ → Cu2+ + e, E°OP = –0.153 V; cathode: Cu+ + e → Cu, E°RP = 0.518 V. Redox: 2Cu+ → Cu2+ + Cu.
E°cell = –0.153 + 0.518 = 0.365 V; 0.365 = 0.059 log Kc, Kc ≈ 1.5 × 106 (book prints 1.50 × 106).
Teacher's Note: Disproportionation: the same species is both anode and cathode reactant.
Exam Note: n = 1 for the net reaction.
Question 64. Zinc granules are added in excess to 500 mL of 1 M Ni(NO3)2 solution at 25°C until the equilibrium is reached. If E°Zn2+/Zn and E°Ni2+/Ni are –0.75 V and –0.24 V respectively, find out the [Ni2+] at equilibrium. (IIT 1991)
Solution. Zn + Ni2+ ⇌ Zn2+ + Ni. mmol before equilibrium: Ni2+ = 500, Zn2+ = 0; at equilibrium: Ni2+ = (500 – a), Zn2+ = a.
E°cell = 0.75 – 0.24 = 0.51 V. At equilibrium Ecell = 0: 0.51 = –(0.059/2) log([Ni2+]/[Zn2+]), so [Ni2+]/[Zn2+] = antilog(–0.51 × 2/0.059) = 5.15 × 10–18.
(500 – a) ≈ 500, so a/(500 – a) = 5.15 × 10–18 and a = 500 × 5.15 × 10–18; [Ni2+] = a/500 = 5.15 × 10–18 M.
Teacher's Note: At equilibrium Ecell = 0, so the ratio [Ni2+]/[Zn2+] equals 1/K.
Exam Note: Nearly all Ni2+ is converted.
Question 65. The standard reduction potential for Cu2+ / Cu is +0.34 V. Calculate the reduction potential at pH = 14 for the above couple, Ksp of Cu(OH)2 is 1.0 × 10–19. (IIT 1991)
Solution. Ksp = [Cu2+][OH–]2. At pH = 14, [H+] = 10–14 so [OH–] = 1; [Cu2+] = 1.0 × 10–19/1 = 1.0 × 10–19 M.
ERP = E° + (0.059/2) log[Cu2+] = 0.34 + 0.0295 log(1 × 10–19) = –0.2205 V.
Teacher's Note: Ksp fixes [Cu2+] at the given [OH–].
Exam Note: Use n = 2 in Nernst.
Question 66. The emf of cell Ag | AgI(s), 0.05 M KI || 0.05 M AgNO3 | Ag is 0.788 V. Calculate solubility product of AgI. (IIT 1996)
Solution. Ksp = [Ag+][I–] = [Ag+]L.H.S.[0.05].…(1)
This is a concentration cell: Ecell = 0.059 log([Ag+]R.H.S./[Ag+]L.H.S.); 0.788 = 0.059 log(0.05/[Ag+]L.H.S.), so [Ag+]L.H.S. = 2.203 × 10–15 M.
By (1): Ksp = (2.203 × 10–15)(0.05) = 1.10 × 10–16.
Teacher's Note: Concentration cell emf reveals the tiny [Ag+] on the AgI side.
Exam Note: Ksp needs the I– concentration, 0.05 M.
Question 67. If it is desired to construct the following voltaic cell to have Ecell = 0.0860 V, what [Cl–] must be present in the cathodic half cell to achieve the desired emf. Given Ksp of AgCl and AgI are 1.8 × 10–10 and 8.5 × 10–17 respectively? Ag(s) | Ag+ [Sat. AgI(aq.)] || Ag+ (Sat. AgCl·xM Cl–) | Ag(s)
Solution. Ecell = 0.059 log([Ag+]R.H.S./[Ag+]L.H.S.). [Ag+]L.H.S. = √Ksp(AgI) = √(8.5 × 10–17) = 9.22 × 10–9 M.
0.0860 = 0.059 log([Ag+]R.H.S./9.22 × 10–9), so the ratio = 28.68 and [Ag+]R.H.S. = 28.68 × 9.22 × 10–9 M.
[Cl–] = Ksp(AgCl)/[Ag+] = 1.8 × 10–10/(28.68 × 9.22 × 10–9) = 6.8 × 10–4 M.
Teacher's Note: Each side’s [Ag+] comes from Ksp; the cathode side also has added Cl–.
Exam Note: Left side is pure saturated AgI.
Question 68. The standard reduction potential of Cu2+|Cu and Ag+|Ag electrodes are 0.337 V and 0.799 V respectively. Construct a galvanic cell using these electrodes so that its E°cell is +ve. For what [Ag+] will the emf of cell at 25°C be zero if [Cu2+] is 0.01 M? (IIT 1990)
Solution. E°OP(Cu/Cu2+) = –0.337 V > E°OP(Ag/Ag+) = –0.799 V, so Cu is oxidised and Ag+ is reduced: Cu + 2Ag+ → Cu2+ + 2Ag. The cell is Cu | CuSO4(aq.) || AgNO3(aq.) | Ag.
Ecell = –0.337 + 0.799 + (0.059/2) log([Ag+]2/[Cu2+]). With Ecell = 0 and [Cu2+] = 0.01 M: 0 = 0.462 + (0.059/2) log([Ag+]2/0.01), giving [Ag+] = 1.48 × 10–9 mol L–1 (book 1.477 × 10–9).
Teacher's Note: The metal with the larger oxidation potential is the anode.
Exam Note: At E = 0 the cell has reached equilibrium.
Question 69. Find the solubility product of a saturated solution of Ag2CrO4 in water at 298 K if the emf of the cell Ag | Ag+ (satd. Ag2CrO4 sol.) || Ag+ (0.1 M) | Ag is 0.164 V at 298 K. (IIT 1998)
Solution. Ecell = 0 + 0.059 log([Ag+]R.H.S./[Ag+]L.H.S.): 0.164 = 0.059 log(0.1/[Ag+]L.H.S.), so [Ag+]L.H.S. = 1.66 × 10–4 M.
Ag2CrO4 ⇌ 2Ag+ + CrO42–; [CrO42–] = 1.66 × 10–4/2 M.
Ksp = [Ag+]2[CrO42–] = (1.66 × 10–4)2(1.66 × 10–4/2) = 2.287 × 10–12 mol3 L–3.
Teacher's Note: Concentration cell gives [Ag+] of the saturated solution; chromate is half of it.
Exam Note: Ksp = [Ag+]2[CrO42–].
Question 70. A silver electrode is immersed in saturated Ag2SO4(aq.). The potential difference between the silver electrode and the standard hydrogen electrode is found to be 0.711 V. Determine Ksp(Ag2SO4). Given, E°Ag+/Ag = 0.799 V. (Roorkee 2000)
Solution. Cell: Pt H2 | H+(1 M) || Ag2SO4(aq., saturated) | Ag; H2 → 2H+ + 2e, 2Ag+ + 2e → 2Ag. Ecell = EOP(H) + ERP(Ag).
0.711 = 0.799 + (0.059/2) log[Ag+]2, so log[Ag+]2 = –(0.799 – 0.711) × 2/0.059 ≈ –3; [Ag+]2 = 10–3 and [Ag+] = 3.2 × 10–2.
Ag2SO4 ⇌ 2Ag+ + SO42–: Ksp = [Ag+]2[SO42–] = (3.2 × 10–2)2(3.2 × 10–2/2) = 1.6 × 10–5.
Teacher's Note: Measured potential gives [Ag+]; sulphate is half of it.
Exam Note: Use n = 2 with [Ag+]2 or n = 1 with [Ag+].
Question 71. The emf of the cell obtained by combining Zn and Cu electrodes of a Daniel cell with N calomel electrodes are 1.083 V and –0.018 V respectively at 25°C. If the potential of N calomel electrode is –0.28 V, find emf of Daniel cell.
Solution. Taking EOP (calomel) = –0.28 V, ERP (calomel) = +0.28 V.
Zn || calomel: 1.083 = E°OP(Zn/Zn2+) + 0.28, so EOP(Zn/Zn2+) = +0.803 V.
Cu || calomel: –0.018 = EOP(Cu/Cu2+) + 0.28, so EOP(Cu/Cu2+) = –0.298 V.
Daniel cell: Ecell = EOP(Zn/Zn2+) + ERP(Cu2+/Cu) = 0.803 + 0.298 = 1.101 V.
Teacher's Note: Use the calomel electrode as a common reference to compare Zn and Cu.
Exam Note: Subtract the reference potential before combining.
Question 72. The standard reduction potential for the reaction 2H2O + 2e → H2 + 2OH– is –0.8277 V. Calculate the equilibrium constant for the reaction 2H2O ⇌ H3O+ + OH– at 25°C. (IIT 1989)
Solution. Combine the H+/H2 electrode (E° = 0) with the water electrode: anode H2 + 2OH– → 2H2O + 2e (E°OP = +0.8277 V); cathode 2H+ + 2e → H2. Net: 2H+ + 2OH– ⇌ 2H2O, with K = ([H2O]2)/([H+]2[OH–]2) = (1/Kw)2.
Ecell = 0.8277 + (0.059/2) log[Kw]2; at equilibrium Ecell = 0, so –0.8277 = 0.059 log Kw, log Kw = –0.8277/0.059 and Kw = 9.35 × 10–15.
Teacher's Note: The equilibrium constant asked is Kw; get it from E° of the water/hydrogen cell.
Exam Note: Kw is about 10–14.
Question 73. An excess of liquid Hg was added to 10–3 M acidified solution of Fe3+ ions. It was found that only 5% of the ions remained as Fe3+ at equilibrium at 25°C. Calculate E° for 2Hg | Hg22+ at 25°C for 2Hg + 2Fe3+ ⇌ Hg22+ + 2Fe2+ and E°Fe2+/Fe3+ = –0.77 V. (IIT 1995)
Solution. At equilibrium: [Fe3+] = (5/100) × 10–3, [Fe2+] = (95/100) × 10–3, [Hg22+] = (95/(2 × 100)) × 10–3.
Ecell = 0 = E°OP(Hg/Hg22+) – (0.059/2) log[Hg22+] + E°RP(Fe3+/Fe2+) + (0.059/2) log([Fe3+]2/[Fe2+]2), with E°RP = +0.77 V.
E°OP(Hg/Hg22+) = –0.77 – (0.059/2) log{[(5/100) × 10–3]2/([(95/100) × 10–3]2[(95/200) × 10–3])} = –0.792 V (i.e. E°RP = +0.792 V for Hg22+/Hg).
Teacher's Note: Equilibrium concentrations from the 5%/95% split give Q = K; set Ecell = 0.
Exam Note: Hg22+ is half the Fe2+ moles.
Question 74. Calculate the potential of an indicator electrode versus the standard hydrogen electrode, which originally contains 0.1 M MnO4– and 0.8 M H+ and which was treated with Fe2+ necessary to reduce 90% of MnO4– to Mn2+. E°MnO4–/Mn2+ = 1.51 V.
Solution. MnO4– + 8H+ + 5e → Mn2+ + 4H2O. After reducing 90%: [MnO4–] = 0.1 × 10/100 = 0.01 M and [Mn2+] = 0.1 × 90/100 = 0.09 M; [H+] = 0.8 M.
E = 1.51 + (0.059/5) log([MnO4–][H+]8/[Mn2+]) = 1.51 + 0.0118 log(0.01 × 0.88/0.09) = 1.51 – 0.0204 = 1.49 V.
Corrected: the book prints 1.411 V (a correction term of –0.099); working the Nernst term with 0.059/5 gives –0.0204 V, so 1.49 V.
Teacher's Note: Reduction potential of the MnO4–/Mn2+ electrode falls only slightly after 90% reduction because of the 1/5 factor.
Exam Note: Divide 0.059 by n = 5.
Question 75. Calculate the minimum mass of NaOH required to be added in R.H.S. to consume all the H+ present in R.H.S. of cell of emf +0.701 V at 25°C before its use. Also report the emf of the cell after addition of NaOH. Cell: Zn | Zn2+ (0.1 M) || HCl (1 litre) | PtH2 (1 atm). E°Zn/Zn2+ = +0.760 V
Solution. Zn → Zn2+ + 2e; 2H+ + 2e → H2. Ecell = 0.760 + (0.059/2) log([H+]2/[Zn2+]): 0.701 = 0.760 + 0.0295 log([H+]2/0.1), so [H+] = 0.0316 mol L–1.
Meq. of NaOH = meq. of H+: (w/40) × 1000 = 0.0316 × 1000 (V = 1 litre), w = 1.264 g.
After complete neutralisation [H+] = 10–7: Ecell = 0.760 + (0.059/2) log((10–7)2/0.1) = 0.3765 V.
Teacher's Note: Find [H+] from the measured emf; NaOH needed equals H+ moles; neutral gives 10–7 M.
Exam Note: Volume is 1 L so moles equal molarity.
Question 76. A zinc electrode is dipped in a 0.1 M solution at 25°C. Assuming that salt is dissociated to 20% at this dilution, calculate the electrode potential. E°Zn2+/Zn = –0.76 V.
Solution. [Zn2+] = 0.1 × 20/100 = 0.02 M. Zn → Zn2+ + 2e: EOP = 0.76 – (0.059/2) log(0.1 × 20/100) = +0.81 V.
Hence ERP(Zn2+/Zn) = –0.81 V (Zn2+ + 2e → Zn).
Teacher's Note: Use only the dissociated fraction as [Zn2+].
Exam Note: Oxidation and reduction potentials differ in sign.
Question 77. A cell is containing two H electrodes. The negative electrode is in contact with a solution of 10–6 M H+ ion. The emf of the cell is 0.118 volt at 25°C. Calculate [H+] at positive electrode.
Solution. Anode (negative): H2 → 2H+ + 2e, [H+] = 10–6 M; cathode (positive): 2H+ + 2e → H2, [H+] = a M.
Ecell = (0.059/2) log([H+]2cathode/[H+]2anode): 0.118 = 0.059 log([H+]cathode/10–6), so [H+]cathode = 10–4 M.
Teacher's Note: Hydrogen concentration cell: emf = 0.059 log([H+]c/[H+]a).
Exam Note: Negative electrode is the anode (more dilute side).
Question 78. For the galvanic cell Ag | AgCl(s), KCl (0.2 M) || KBr (0.001 M), AgBr(s) | Ag. Calculate the emf generated and assign correct polarity to each electrode for a spontaneous process after taking an account of cell reaction at 25°C. Given, Ksp AgCl = 2.8 × 10–10; Ksp AgBr = 3.3 × 10–13. (IIT 1992)
Solution. Ecell = 0.059 log([Ag+]R.H.S./[Ag+]L.H.S.).
L.H.S.: [Ag+] = Ksp/[Cl–] = 2.8 × 10–10/0.2 = 1.4 × 10–9 M. R.H.S.: [Ag+] = 3.3 × 10–13/0.001 = 3.3 × 10–10 M.
Ecell = 0.059 log(3.3 × 10–10/1.4 × 10–9) = –0.037 V, so the cell as written is not spontaneous. For a spontaneous process the polarity must be reversed: cell is Ag | AgBr(s), KBr (0.001 M) || AgCl(s), KCl (0.2 M) | Ag and E = +0.037 V (AgBr side is anode, AgCl side is cathode).
Teacher's Note: The side with lower [Ag+] is the anode; a negative emf means reverse the cell.
Exam Note: State the sign and the reversed cell.
Question 79. Consider the cell Ag | AgBr(s) Br– || AgCl(s) Cl– | Ag at 25°C. The solubility product constants of AgCl and AgBr are 1 × 10–10 and 5 × 10–13 respectively. For what ratio of concentration of Br– and Cl– ions would the emf of cell be zero?
Solution. Let a and b be [Br–] and [Cl–] when Ecell = 0. [Ag+]L.H.S. = 5 × 10–13/a; [Ag+]R.H.S. = 1 × 10–10/b.
Ecell = 0 + 0.059 log([Ag+]R.H.S./[Ag+]L.H.S.) = 0.059 log((1 × 10–10 × a)/(5 × 10–13 × b)) = 0, so the ratio equals 1: a/b = [Br–]/[Cl–] = 1/200.
Teacher's Note: Zero emf means equal [Ag+] on both sides.
Exam Note: Ratio comes from Ksp(AgBr)/Ksp(AgCl).
Question 80. Calculate E° of redox change: Ag2S + 2e ⇌ 2Ag + S2– if the reaction occurs at pH = 3 and saturated with 0.1 M H2S. K1 and K2 for H2S are 1 × 10–8 and 1.1 × 10–13 respectively. Ksp Ag2S = 2 × 10–49 and E°Ag+/Ag = 0.8 V.
Solution. ERP = E°RP + (0.059/2) log[Ag+]2.…(1)
K1 × K2 = [H+]2[S2–]/[H2S]: 1.1 × 10–21 = (10–3)2[S2–]/0.1, so [S2–] = 1.1 × 10–16 M.
Ksp = [Ag+]2[S2–] = 2 × 10–49, so [Ag+]2 = 1.818 × 10–33.…(2)
ERP = 0.8 + (0.059/2) log(1.818 × 10–33) = 0.8 – 0.9658 = –0.1658 V (the electrode potential under these stated conditions; for [S2–] = 1 M the standard value would be –0.637 V).
Teacher's Note: Find [S2–] from combined Ka and pH, then [Ag+] from Ksp and use Nernst.
Exam Note: Combined K = K1K2 = 1.1 × 10–21.
Question 81. The pKsp of AgI is 16.07. If the E° value for Ag+ / Ag is 0.7991 V, find out the E° for half reaction: AgI(s) + e → Ag + I–
Solution. Ag → Ag+ + e (E° = –0.7991 V); AgI(s) + e → Ag + I– (E° = ?); net: AgI ⇌ Ag+ + I–. For the net change E°cell = –0.7991 + E°RP(I–/AgI/Ag), and for AgI ⇌ Ag+ + I– at equilibrium E°cell = 0.059 log Ksp. Hence E°RP = 0.7991 + 0.059 log Ksp = 0.7991 – 0.059 × 16.07 = 0.7991 – 0.9481 = –0.1490 V.
Teacher's Note: E°(AgI/Ag) = E°(Ag+/Ag) + 0.059 log Ksp.
Exam Note: Ksp = 10–16.07.
Question 82. Determine potential for the cell Pt | Fe2+, Fe3+ || Cr2O72–, Cr3+, H+ | Pt in which [Fe2+] and [Fe3+] are 0.5 M and 0.75 M respectively and [Cr2O72–], [Cr3+] and [H+] are 2 M, 4 M and 1 M respectively. Given, Fe3+ + e → Fe2+, E° = 0.770 V; 14H+ + 6e + Cr2O72– → 2Cr3+ + 7H2O, E° = 1.35 V
Solution. E°OP(Fe2+/Fe3+) = –0.770 V is less than E°RP of dichromate, so anode: Fe2+ → Fe3+ + e (L.H.S.); cathode: 14H+ + 6e + Cr2O72– → 2Cr3+ + 7H2O (R.H.S.).
Ecell = –0.770 – (0.059/6) log([Fe3+]6/[Fe2+]6) + 1.35 + (0.059/6) log([Cr2O72–][H+]14/[Cr3+]2)
= –0.770 – 0.059 log(0.75/0.5) + 1.35 + (0.059/6) log((2 × 1)/(4)2) = –0.770 – 0.0104 + 1.35 – 0.0089 = +0.56 V.
Teacher's Note: Multiply each Nernst term to a common 6 electrons: the Fe term becomes 6 × (Fe ratio).
Exam Note: Set Fe3+/Fe2+ exponent to 6.
Question 83. The voltage of the cell given below is –0.46 V: PtH2 | NaHSO3 (0.4 M), Na2SO3 (6.44 × 10–3 M) || Zn2+ (0.3 M) | Zn(s). Also, Zn2+ + 2e → Zn(s), E° = –0.763 V. Calculate the value of K2, where K2 = [H+][SO32–]/[HSO3–]
Solution. Ecell = EOP(H) + ERP(Zn2+/Zn) + (0.059/2) log([Zn2+]/[H+]2): –0.46 = 0 – 0.763 + (0.059/2) log(0.3/[H+]2), so [H+] = 4.0 × 10–6 M.
Dissociation of HSO3– is suppressed by the common ion SO32–, so [SO32–] = 6.44 × 10–3 M and [HSO3–] = 0.4 M.
K2 = (4 × 10–6 × 6.44 × 10–3)/0.4 = 6.44 × 10–8.
Teacher's Note: Use the measured emf to find [H+] of the buffer, then plug into K2.
Exam Note: Common ion keeps both concentrations as given.
Question 84. What ratio of Pb2+ to Sn2+ concentration is needed to reverse the following cell reaction? Sn(s) + Pb(aq.)2+ ⇌ Sn(aq.)2+ + Pb(s); E°Sn2+/Sn = –0.136 V and E°Pb2+/Pb = –0.126 V
Solution. Ecell = EOP(Sn) + ERP(Pb) = 0.136 – 0.126 + (0.059/2) log([Pb2+]/[Sn2+]) = 0.01 + 0.0295 log([Pb2+]/[Sn2+]).
At equilibrium Ecell = 0, so [Pb2+]/[Sn2+] = 0.458. The cell reaction proceeds as written while [Pb2+]/[Sn2+] > 0.458, and it will be reversed when [Pb2+]/[Sn2+] < 0.458 (Ecell negative).
Teacher's Note: Reversal happens when Ecell becomes negative, i.e. below the equilibrium ratio.
Exam Note: Equilibrium ratio is 10–0.339 = 0.458.
Question 85. The Edison storage cell is represented as, Fe(s) | FeO(s) | KOH(aq.) | Ni2O3(s) | Ni(s). The half cell reactions are: Ni2O3(s) + H2O(l) + 2e → 2NiO(s) + 2OH–, E° = +0.40 V; FeO(s) + H2O(l) + 2e → Fe(s) + 2OH–, E° = –0.87 V. (i) What is the cell reaction? (ii) What is the cell emf? How does it depend on the concentration of KOH? (iii) What is the maximum amount of electrical energy that can be obtained from one mole of Ni2O3? (IIT 1993)
Solution. E°OP for Fe/FeO (+0.87 V) > E°OP for NiO/Ni2O3 (–0.40 V), so Fe is oxidised.
Anode: Fe(s) + 2OH– → FeO(s) + H2O(l) + 2e. Cathode: Ni2O3(s) + H2O(l) + 2e → 2NiO(s) + 2OH–.
(i) Fe(s) + Ni2O3(s) → FeO(s) + 2NiO(s).
(ii) Ecell = E°OP(Fe/FeO) + E°RP(Ni2O3/NiO) = 0.87 + 0.40 = 1.27 V; the OH– and H2O terms cancel, so Ecell is independent of KOH concentration.
(iii) –ΔG° = nE°F = 2 × 1.27 × 96500 = 245110 J = 245.11 kJ per mole of Ni2O3.
Teacher's Note: OH– and H2O appear on both sides, so the Nernst term vanishes.
Exam Note: Maximum work = nFE°, n = 2.
Question 86. For the electrode reaction, CH3CHO + 2H+ + 2e → CH3CH2OH (1 M each), the half cell potential is –0.197 V at pH = 7. Calculate the half cell potential when pH = 6 and ethanol and acetaldehyde each have concentration 10–5 M.
Solution. At pH = 7: ERP = E°RP + (0.059/2) log([CH3CHO][H+]2/[CH3CH2OH]) : –0.197 = E°RP + (0.059/2) × (–14), so E°RP = 0.216 V.
At pH = 6: ERP = 0.216 + (0.059/2) log((10–6)2 × 10–5/10–5) = 0.216 + (0.059/2) × (–12) = 0.216 – 0.354 = –0.138 V.
Teacher's Note: First extract E° from the pH 7 data, then reapply Nernst at pH 6.
Exam Note: Equal aldehyde and alcohol concentrations cancel.
Question 87. For the cell Mg(s) | Mg(aq.)2+ || Ag(aq.)+ | Ag(s), calculate the equilibrium constant at 25°C and the maximum work that can be obtained during operation of cell. Given, E°Mg/Mg2+ = +2.37 V and E°Ag+/Ag = +0.80 V, R = 8.314 J
Solution. Cell reaction: Mg + 2Ag+ ⇌ Mg2+ + 2Ag. E°cell = 2.37 + 0.80 = 3.17 V.
At equilibrium Ecell = 0: 0 = 3.17 + (0.059/2) log(1/Kc), so log Kc = 107.457, Kc = 10107.457 (≈ 2.9 × 10107).
Wmax = –ΔG° = nE°F = 2 × 96500 × 3.17 = 6.118 × 105 J = 6.118 × 102 kJ.
Teacher's Note: K from log K = nE°/0.059; maximum work = nFE°.
Exam Note: n = 2 electrons.
Question 88. The standard reduction potential for the half cell NO3–(aq.) + 2H+(aq.) + e → NO2(g) + H2O is 0.78 V. (i) Calculate the reduction potential in 8 M H+. (ii) What will be the reduction potential of the half cell in a neutral solution? Assume all the other species to be at unit concentration.
Solution. ERP = E° + (0.059/1) log[H+]2.
(i) 8 M H+: ERP = 0.78 + 0.059 log(8)2 = 0.78 + 0.1066 = 0.887 V (book prints 0.8862 V).
(ii) Neutral: [H+] = 10–7 M: ERP = 0.78 + 0.059 log(10–7)2 = 0.78 – 0.826 = –0.046 V.
Teacher's Note: Two H+ and one electron give a 0.118 V per pH-unit slope.
Exam Note: Square [H+] before taking the log.
Question 89. The standard reduction potential of E°Bi3+/Bi and E°Cu2+/Cu are 0.226 V and 0.344 V respectively. A mixture of salts of Bi3+ and Cu2+ at unit concentration each is electrolysed at 25°C. To what value can [Cu2+] be brought down before bismuth starts to deposit during electrolysis? (IIT 1993)
Solution. Initially ECu2+/Cu = 0.344 + (0.059/2) log 1 = 0.344 V; EBi3+/Bi = 0.226 + (0.059/3) log 1 = 0.226 V. Cu2+ deposits first until its potential falls to 0.226 V, when Bi3+ begins to deposit.
0.226 = 0.344 + (0.059/2) log[Cu2+], so log[Cu2+] = –4 and [Cu2+] = 10–4 M. (The book’s working shows 0.266 for the Bi potential, a misprint for 0.226.)
Teacher's Note: The metal with the higher ERP deposits first; second metal starts when potentials equalise.
Exam Note: Equate ECu with EBi at 1 M.
Question 90. How much is the oxidising power of (1 M, MnO4–/Mn2+, 1 M) couple decreased if the H+ concentration is decreased from 1 M to 10–4 M at 25°C?
Solution. MnO4– + 8H+ + 5e → Mn2+ + 4H2O: ERP = E° + (0.059/5) log([MnO4–][H+]8/[Mn2+]) = E° + 0.0118 log(1 × 1/1) = E° at 1 M H+.
With [H+] = 10–4 M: ERP = E° + 0.0118 log(10–4)8 = E° – 0.38 V.
The ERP of the couple decreases by 0.38 V (EOP increases by 0.38 V), so its oxidising power decreases.
Teacher's Note: Coefficient 8 of H+ divided by 5 electrons gives 0.0944 V per pH unit.
Exam Note: 8 × 4 × 0.059/5 = 0.38.
Question 91. An alloy weighing 1.05 g of Pb – Ag was dissolved in desired amount of HNO3 and the volume was made 350 mL. An Ag electrode was dipped in solution and Ecell of the cell Pt H2 (1 atm) | H+ (1 M) || Ag+ | Ag was 0.503 V at 298 K. Calculate the percentage of lead in alloy. Given E°Ag+/Ag = 0.80 V.
Solution. Anode: H2 → 2H+ + 2e; cathode: 2Ag+ + 2e → 2Ag. Ecell = E°OP(H2) + E°RP(Ag) + (0.059/2) log([Ag+]2PH2/[H+]2).
0.503 = 0 + 0.80 + (0.059/2) log[Ag+]2, so [Ag+] = 9.25 × 10–6 M.
Mass of Ag in 350 mL = 9.25 × 10–6 × (350/1000) × 108 = 3.497 × 10–4 g.
% Ag in 1.05 g alloy = (3.497 × 10–4/1.05) × 100 = 0.033%, so % of lead in alloy = 99.967%.
Teacher's Note: Cell emf gives [Ag+]; then moles × volume gives Ag mass.
Exam Note: Subtract % Ag from 100.
Question 92. Calculate the emf of given cell reaction and design the cell if both electrolytes are present in their saturated solution state. Given E°Pb2+/Pb and E°Hg22+/Hg are 0.126 V and –0.789 V respectively and Ksp of PbSO4 and Hg2SO4 are 2.43 × 10–8 and 1.46 × 10–6 respectively. Pb(s) + Hg2SO4 ⇌ PbSO4(s) + 2Hg(l)
Solution. E°OP is larger for Pb, so anode: Pb → Pb2+ + 2e; cathode: Hg22+ + 2e → Hg2. Cell: Pb | PbSO4 (saturated) || Hg2SO4 (saturated) | Hg.
Ecell = E°OP(Pb) + E°RP(Hg) + (0.059/2) log([Hg22+]/[Pb2+]), with E°OP(Pb) = 0.126 V and E°RP(Hg) = +0.789 V.
PbSO4 ⇌ Pb2+ + SO42–: [Pb2+] = √Ksp = √(2.43 × 10–8). Hg2SO4 ⇌ Hg22+ + SO42–: [Hg22+] = √(1.46 × 10–6).
Ecell = 0.126 + 0.789 + (0.059/2) log(√(1.46 × 10–6)/√(2.43 × 10–8)) = 0.941 V.
Teacher's Note: Saturated salts give ion concentrations as √Ksp (1:1 salts).
Exam Note: Pb is the anode; Hg22+ is reduced.
Question 93. The standard reduction potential of the Ag+ / Ag electrode at 298 K is 0.799 V. Given that for AgI, Ksp = 8.7 × 10–17, evaluate the potential of the Ag+ / Ag electrode in a saturated solution of AgI. Also calculate the standard reduction potential of the I– / AgI / Ag electrode. (IIT 1994)
Solution. EAg+/Ag = E° + (0.059/1) log[Ag+]. In saturated AgI, [Ag+] = [I–] = √Ksp = √(8.7 × 10–17) = 9.32 × 10–9 M.
E = 0.799 + 0.059 log(9.32 × 10–9) = 0.799 – 0.474 = 0.32 V.
For AgI + e → Ag + I–: E°RP(I–/AgI/Ag) = E°Ag+/Ag + 0.059 log Ksp = 0.799 + 0.059 log(8.7 × 10–17) = 0.799 – 0.948 = –0.149 V.
Teacher's Note: Saturation fixes [Ag+]; E°(AgI/Ag) = E°(Ag+/Ag) + 0.059 log Ksp.
Exam Note: Two answers: 0.32 V and –0.149 V.
Question 94. For the reaction Ag+(aq.) + Cl–(aq.) ⇌ AgCl(s), the ΔG° values for Ag+(aq.), Cl–(aq.) and AgCl(s) are +77, –129 and –109 kJ mol–1. Write the cell representation of above reaction and calculate E° at 298 K. Also calculate Ksp of AgCl at 298 K. If 6.539 × 10–2 g of metallic zinc is added to 100 mL saturated solution of AgCl, find the value of log10([Zn2+]/[Ag+]2). How many mole of Ag will be precipitated in this reaction? Given, E°Zn2+/Zn = –0.76 V. (IIT 2005)
Solution. ΔG° (reaction) = –109 – 77 + 129 = –57 kJ. –ΔG° = nE°F: 57 × 103 = 1 × E° × 96500, E°cell = 0.59 V.
Cell: Ag | AgCl(s) | Cl–(aq.) || Ag+(aq.) | Ag (anode on left, cathode on right).
At equilibrium Ecell = 0, so E°cell = –0.059 log Ksp: 0.59 = –0.059 log Ksp, Ksp = 1 × 10–10 M2. Solubility S = √Ksp = 10–5 M; moles of AgCl in 100 mL = 10–5 × (100/1000) = 10–6.
Moles of Zn added = 6.539 × 10–2/65.39 = 10–3 (excess). Ag → Ag+ + e: ΔG° = 77 kJ, so E°Ag/Ag+ = –0.80 V.
Zn → Zn2+ + 2e (E°OP = +0.76 V); 2Ag+ + 2e → 2Ag (E°RP = +0.80 V); Zn + 2Ag+ → Zn2+ + 2Ag, E°cell = 1.56 V.
At equilibrium Ecell = 0: E°cell = (0.059/2) log([Zn2+]/[Ag+]2), so log10([Zn2+]/[Ag+]2) = (1.56 × 2)/0.059 = 52.88 and Kc = 7.61 × 1052.
Since Kc is very large, nearly all Ag+ is converted to Ag: moles of Ag precipitated = moles of Ag+ in 100 mL = 10–6 (Zn is in excess).
Teacher's Note:Add the formation steps by Hess to get ΔG° of the cell reaction, then use ΔG° = –nFE° and E°.
Exam Note: Huge K means Ag+ is almost completely displaced.
Question 95. The standard potential of the following cell is 0.23 V at 15°C and 0.21 V at 35°C. Pt H2(g) | HCl(aq.) || AgCl(s) | Ag(s). (i) Write the cell reaction. (ii) Calculate ΔH° and ΔS° for the cell reaction by assuming that these quantities remain unchanged in the range 15°C to 35°C. (iii) Calculate the solubility of AgCl in water at 25°C. Given, the standard electrode potential of the Ag+(aq.) / Ag(s) couple is 0.80 V at 25°C. (IIT 2001)
Solution. (i) Anode: ½H2 → H+ + e; cathode: AgCl + e → Ag + Cl–. Cell reaction: ½H2 + AgCl → H+ + Ag + Cl–.
(ii) –ΔG° = nE°F = 1 × 0.23 × 96500 = 22195 J at 15°C (288 K) and 1 × 0.21 × 96500 = 20265 J at 35°C (308 K). ΔG° = ΔH° – TΔS°: –22195 = ΔH° – 288ΔS° and –20265 = ΔH° – 308ΔS°. Subtracting: ΔS° = –96.5 J K–1. Then –22195 = ΔH° – 288 × (–96.5), ΔH° = –49987 J = –49.987 kJ.
(iii) At 25°C E°cell = 0.22 V (mean of 0.23 and 0.21), i.e. E°RP(Cl–/AgCl/Ag) = 0.22 V. Also E°Cl–/AgCl/Ag = E°Ag+/Ag + 0.059 log Ksp: 0.22 = 0.80 + 0.059 log Ksp, Ksp = 1.47 × 10–10. Solubility = √Ksp = √(1.47 × 10–10) = 1.21 × 10–5 mol L–1.
Teacher's Note: Two E° values at two temperatures give two ΔG° equations, solved for ΔH° and ΔS°.
Exam Note: Assume ΔH° and ΔS° constant over 15–35°C.
Question 96. Show that the potentials are additive for the process which half reactions are added to yield an overall reaction but they are not additive when half reactions are added to yield a third half reaction.
Solution. Case 1: when two half reactions add to give an overall reaction, the number of electrons n in each half reaction and in the overall reaction are the same. M1 → M1n+ + ne, –ΔG°1 = nE°1F; M2n+ + ne → M2, –ΔG°2 = nE°2F; M1 + M2n+ → M1n+ + M2, –ΔG°3 = n3E°3F. Since ΔG°3 = ΔG°1 + ΔG°2: n3E°3F = n1E°1F + n2E°2F, so E°3 = (n1E°1 + n2E°2)/n3. With n1 = n2 = n3: E°3 = E°1 + E°2 (additive).
Case 2: when two half reactions add to give a third half reaction, n1 ≠ n2 ≠ n3. M1 → M1n1+ + n1e, –ΔG°1 = n1E°1F; M1n1+ → M1n2+ + (n2 – n1)e, –ΔG°2 = (n2 – n1)E°2F; M1 → M1n2+ + n2e, –ΔG°3 = n2E°3F. From ΔG°3 = ΔG°1 + ΔG°2: n2E°3F = n1E°1F + (n2 – n1)E°2F, so E°3 = (n1E°1 + n2E°2 – n1E°2)/n2 ≠ E°1 + E°2; potentials are not additive, free energies are.
Teacher's Note: Free energies (nFE) always add; potentials add only if the electron count is unchanged.
Exam Note: Write ΔG = –nFE for each step.
Question 97. What is the standard electrode potential for the electrode MnO4–/MnO2 in solution? Given: E°MnO4–/Mn2+ = 1.51 V and E°MnO2/Mn2+ = 1.23 V
Solution. MnO4– + 8H+ + 5e → Mn2+ + 4H2O, E°1 = 1.51 V: ΔG°1 = –5 × 1.51 F = –7.55F.
MnO2 + 4H+ + 2e → Mn2+ + 2H2O, E°2 = 1.23 V: ΔG°2 = –2 × 1.23 F = –2.46F.
Subtract (2) from (1): MnO4– + 4H+ + 3e → MnO2 + 2H2O; ΔG°3 = ΔG°1 – ΔG°2: –3E°3F = –7.55F + 2.46F, so E°3 = 5.09/3 = 1.70 V.
Teacher's Note: Subtract the half-reactions and combine free energies, not potentials.
Exam Note: Electron count of target is 3.
Question 98. The reduction potential diagram for Cu in acid solution is: Cu2+ –(+0.15 volt)→ Cu+ –(+0.50 volt)→ Cu, and Cu2+ → Cu with E° = X volt. Calculate X. Does Cu+ disproportionate in solution?
Solution. Cu2+ + e → Cu+, E°1 = 0.15 V, ΔG°1 = –0.15F; Cu+ + e → Cu, E°2 = 0.5 V, ΔG°2 = –0.5F; Cu2+ + 2e → Cu, E°3 = ?, ΔG°3.
Adding: ΔG°3 = –0.15F – 0.5F = –0.65F = –2E°3F, so X = E°3 = +0.325 V.
Disproportionation 2Cu+ → Cu2+ + Cu: E°cell = E°OP(Cu+/Cu2+) + E°RP(Cu+/Cu) = –0.15 + 0.5 = +0.35 V. Since E° is positive, Cu+ does disproportionate (it acts as both oxidant and reductant).
Teacher's Note: Add ΔG values for steps; Cu+ disproportionates if its reduction potential exceeds its oxidation step.
Exam Note: Right-hand E° > left-hand E° means disproportionation.
Question 99. If E°1 is standard electrode potential for Fe / Fe2+ and E°2 is for Fe2+ / Fe3+. Derive relation between E°1, E°2 and E°3 for Fe / Fe3+.
Solution. Fe → Fe2+ + 2e, –ΔG°1 = 2E°1F …(1); Fe2+ → Fe3+ + e, –ΔG°2 = E°2F …(2); Fe → Fe3+ + 3e, –ΔG°3 = 3E°3F …(3).
Subtracting (1) from (3): Fe2+ → Fe3+ + e, –ΔG°3 + ΔG°1 = 3E°3F – 2E°1F …(4). Comparing (2) and (4): E°2F = 3E°3F – 2E°1F, so E°3 = (2E°1 + E°2)/3, i.e. 3E°3 = 2E°1 + E°2.
Teacher's Note: Luther relation: nE° values add (all potentials on the same convention).
Exam Note: Weighted by electrons: 2 and 1 out of 3.
Question 100. The following galvanic cell was Zn | Zn(NO3)2(aq.) (100 mL, 1 M) || Cu(NO3)2(aq.) (100 mL, 1 M) | Cu, operated as an electrolytic cell using Cu as anode and Zn as cathode. A current of 0.48 ampere was passed for 10 hour and then the cell was allowed to function as galvanic cell. What would be the emf of the cell at 25°C? Assume that the only electrode reactions occurring were those involving Cu/Cu2+ and Zn/Zn2+. Given E°Cu2+/Cu = +0.34 V and E°Zn2+/Zn = –0.76 V.
Solution. During electrolysis Zn2+ discharges at the cathode and Cu2+ enters the solution at the anode. Equivalents passed = (0.48 × 10 × 60 × 60)/96500 = 0.18 eq., so moles of Cu2+ formed = moles of Zn2+ deposited = 0.09 mol = 90 mmol.
Zn2+ left = 100 × 1 – 90 = 10 mmol; Cu2+ left = 100 × 1 + 90 = 190 mmol (both in 100 mL).
Ecell = E°OP(Zn) + E°RP(Cu) + (0.059/2) log([Cu2+]/[Zn2+]) = 0.76 + 0.34 + 0.0295 log(190/10) = 1.137 V.
Teacher's Note: Electrolysis shifts Zn2+ into Cu2+ side balance; then apply Nernst to the new ratio.
Exam Note: Both volumes are 100 mL, so mmol ratio works.
Question 101. A cell Ag | Ag+ || Cu2+ | Cu initially contains 1 M Ag+ and 1 M Cu2+ ions. Calculate the change in the cell potential after the passage of 9.65 ampere of current for 1 hr. (IIT 1999)
Solution. The given cell will not work as a galvanic cell since E°OP(Cu) > E°OP(Ag); the cell Cu | Cu2+ || Ag+ | Ag is the spontaneous one, and passing current reverses the reaction as written: Cu2+ + 2e → Cu (cathode) and 2Ag → 2Ag+ + 2e (anode).
Charge = 9.65 × 60 × 60 C = 34740 C = 0.36 F. Ag+ formed = 0.36 mol; Cu2+ discharged = 0.18 mol. So [Ag+] = 1 + 0.36 = 1.36 M and [Cu2+] = 1 – 0.18 = 0.82 M.
For Cu | Cu2+(0.82 M) || Ag+(1.36 M) | Ag: Ecell = E°cell + (0.059/2) log((1.36)2/0.82) = E°cell + 0.010 V. The cell potential increases by 0.010 V (the statement gives no E° values; with tabulated E° = 0.46 V, Ecell ≈ 0.47 V).
Teacher's Note: Passing charge changes concentrations: Ag+ rises and Cu2+ falls, shifting Ecell.
Exam Note: 0.36 F: 0.36 mol Ag+, 0.18 mol Cu2+.
Question 102. Estimate the cell potential of a Daniel cell having 1.0 M Zn2+ and originally having 1.0 M Cu2+ after sufficient ammonia has been added to the cathode compartment so that the NH3 concentration is 2.0 M. Given E°Zn/Zn2+ and E°Cu/Cu2+ are 0.76 and –0.34 V respectively. Also equilibrium constant for [Cu(NH3)4]2+ formation is 1 × 1012.
Solution. Cu2+ + 4NH3 ⇌ [Cu(NH3)4]2+; Kf = 1 × 1012 = [Cu(NH3)4]2+/([Cu2+][NH3]4) = 1.0/(x(2.0)4), so [Cu2+] = x = 6.25 × 10–14 M. (Because Kf is high, almost all Cu2+ is converted to the complex.)
Ecell = E°OP(Zn/Zn2+) + E°RP(Cu2+/Cu) + (0.059/2) log([Cu2+]/[Zn2+]) = 0.76 + 0.34 + (0.059/2) log(6.25 × 10–14/1) = 0.71 V.
Teacher's Note: Complexation slashes free [Cu2+] via Kf, lowering the Daniel cell emf.
Exam Note: Free [Cu2+] = [complex]/(Kf[NH3]4).
Question 103. Two electrochemical cells are assembled in which the following reactions occur. V2+ + VO2+ + 2H+ → 2V3+ + H2O, E°cell = 0.616 V; V3+ + Ag+ + H2O → VO2+ + 2H+ + Ag(s), E°cell = 0.439 V. Calculate E° for half reaction V3+ + e → V2+. Given, E°Ag+/Ag = 0.799 volt.
Solution. Cell I: V2+ → V3+ + e; VO2+ (V4+) + e → V3+; E°cell = E°OP(V2+/V3+) + E°RP(V4+/V3+) = 0.616 V …(1)
Cell II: V3+ → V4+ + e; Ag+ + e → Ag; 0.439 = E°OP(V3+/V4+) + 0.799, so E°OP(V3+/V4+) = –0.360 V, i.e. E°RP(V4+/V3+) = +0.360 V.
Put in (1): 0.616 = E°OP(V2+/V3+) + 0.360, so E°OP(V2+/V3+) = 0.256 V, giving E°V3+/V2+ (reduction) = –0.256 V.
Teacher's Note: Use the Ag cell to fix the VO2+/V3+ potential, then the first cell gives V2+/V3+.
Exam Note: Final sign: reduction potential is –0.256 V.
Question 104. The emf of cell Zn | ZnSO4 || CuSO4 | Cu at 25°C is 0.03 V and the temperature coefficient of emf is –1.4 × 10–4 volt per degree. Calculate heat of reaction for the change taking place inside the cell.
Solution. Gibbs–Helmholtz: ΔH = nF[T(∂E/∂T)P – E], with T = 298 K, n = 2, F = 96500 C, E = 0.03 V and (∂E/∂T)P = –1.4 × 10–4 V/K.
ΔH = 2 × 96500 [298 × (–1.4 × 10–4) – 0.03] = –13842 J = –13.842 kJ mol–1.
Teacher's Note: Heat of reaction = nF[T(dE/dT) – E]; both terms are negative here.
Exam Note: Keep the sign of the temperature coefficient.
Question 105. For the reaction, H2(g) + 2AgCl(s) + 2H2O(l) → 2Ag(s) + 2H3O+(aq.) + 2Cl–(aq.). At 25°C, the standard free energy of formation of AgCl(s), H2O(l) and (H3O+ + Cl–)(aq.) are –109.7, –237.2 and –368.4 kJ/mol. Calculate what will be the cell voltage if this reaction is run at 25°C and one atmosphere in a cell in which H2 activity is unity and H3O+(aq.) and Cl–(aq.) activities are each at 0.01 M?
Solution. ΔG°reaction = ΣG°products – ΣG°reactants = 0 + 2(–368.4) – 0 – 2(–109.7) – 2(–237.2) = –43.0 kJ (G°f of elements is zero).
–ΔG° = nE°F: 43 × 103 = 2 × E° × 96500, E° = 0.2228 V.
E = E° + (0.059/2) log(PH2/([H3O+]2[Cl–]2)) = 0.2228 + 0.0295 log(1/((0.01)2(0.01)2)) = 0.459 V (book prints 0.458 V).
Teacher's Note: ΔG° of reaction from formation energies gives E°; solids and liquids drop out of the Nernst Q.
Exam Note: n = 2 electrons.
Question 106. E°cell for reaction, 4Al(s) + 3O2(g) + 6H2O + 4OH– → 4[Al(OH)4]– is 2.73 V. If G°f for OH– and H2O are –157 kJ mol–1 and –237.2 kJ mol–1, determine G°f for [Al(OH)4]–.
Solution. ΔG° = –nE°F = –12 × 2.73 × 96500 J = –3.1613 × 103 kJ (n = 12: 4Al → 4Al3+ + 12e; 3O2 + 12e → 6O2–).
For the reaction: ΔG° = 4G°f[Al(OH)4]– – 6G°f[H2O] – 4G°f[OH–] (elements have zero G°f).
–3.1613 × 103 = 4G°f – 6(–237.2) – 4(–157), so G°f[Al(OH)4]– = –1303 kJ mol–1 (the sign is lost in the scan; the working gives a negative value).
Teacher's Note: ΔG° = –nFE° with n = 12 for the balanced equation, then Hess-type formation sum.
Exam Note: Elements in standard state have G°f = 0.
Question 107. Calculate the emf of cell: PtH2 (1 atm) | CH3COOH (0.1 M) || NH4OH (0.01 M) | PtH2 (1 atm). Ka for CH3COOH = 1.8 × 10–5; Kb for NH4OH = 1.8 × 10–5.
Solution. At L.H.S.: CH3COOH ⇌ CH3COO– + H+: [H+] = √(KaC) = √(1.8 × 10–5 × 0.1) = 1.342 × 10–3 M.
At R.H.S.: NH4OH ⇌ NH4+ + OH–: [OH–] = √(KbC) = √(1.8 × 10–5 × 0.01) = 0.424 × 10–3 M, so [H+] = 10–14/(0.424 × 10–3) = 2.359 × 10–11 M.
Anode (L.H.S.): ½H2 → H+ + e; cathode (R.H.S.): H+ + e → ½H2. Ecell = 0.059 log([H+]R.H.S./[H+]L.H.S.) = 0.059 log(2.359 × 10–11/1.342 × 10–3) = –0.4575 V.
Teacher's Note: Hydrogen concentration cell; find [H+] of weak acid and of weak base solution.
Exam Note: Negative emf means the cell as written is not spontaneous.
Question 108. Two weak acid solutions HA1 and HA2 each with the same concentration and having pKa values 3 and 5 are placed in contact with hydrogen electrode (1 atm, 25°C) and are interconnected through a salt bridge. Find emf of cell.
Solution. Cell: Pt H2 (1 atm) | HA1 || HA2 | H2 (1 atm) Pt. EH/H+ (L.H.S.) = E°OP + 0.059 (pH)1 and EH+/H (R.H.S.) = E°RP – 0.059 (pH)2; the E° terms cancel. For each acid [H+] = √(KaC), so pH = ½pKa – ½ log C (C same).
Ecell = 0.059[(pH)2 – (pH)1] = 0.059[½pKa2 – ½pKa1] = (0.059/2)[5 – 3] = +0.059 V.
Teacher's Note: Same concentration means the pH difference is half the pKa difference.
Exam Note: Dilute acid (higher pKa) side is the cathode.
Question 109. Dissociation constant of Ag(NH3)2+ into Ag+ and NH3 is 6 × 10–14. Calculate E° for the half reaction, Ag(NH3)2+ + e → Ag + 2NH3. Given, Ag+ + e → Ag has E° = 0.799 V.
Solution. Ag → Ag+ + e (E°OP = –0.799 V); Ag(NH3)2+ + e → Ag + 2NH3 (E°RP = ?). Net: Ag(NH3)2+ ⇌ Ag+ + 2NH3, Ecell = E°cell + 0.059 log([Ag(NH3)2+]/([Ag+][NH3]2)).
At equilibrium Ecell = 0, so E°cell = 0.059 log Kc = 0.059 log(6 × 10–14) = –0.780 V. Then E°Ag(NH3)2+/Ag = –0.780 + 0.799 = +0.019 V.
Teacher's Note: Complexation lowers E° by 0.059 log(1/Kd): E°complex = E°Ag + 0.059 log Kd.
Exam Note: Kd is for dissociation, so log is negative.
Question 110. The overall formation constant for the reaction of 6 mole of CN– with cobalt (II) is 1 × 1019. Calculate the formation constant for the reaction of 6 mole of CN– with cobalt (III). Given that, Co(CN)63– + e → Co(CN)64–, E°RP = –0.83 V; Co3+ + e → Co2+, E°RP = 1.82 V
Solution. Cell: Co(CN)64– → Co(CN)63– + e (E°OP = +0.83 V); Co3+ + e → Co2+ (E°RP = 1.82 V). Net: Co(CN)64– + Co3+ ⇌ Co2+ + Co(CN)63–.
With Kf1 = [Co(CN)64–]/([Co2+][CN–]6) = 1019 and Kf2 = [Co(CN)63–]/([Co3+][CN–]6): Ecell = E°cell + 0.059 log(Kf1/Kf2).
At equilibrium Ecell = 0: 0 = 0.83 + 1.82 + 0.059 log(1019/Kf2), so Kf2/1019 = 8.23 × 1044 and Kf2 = 8.23 × 1063.
Teacher's Note: Build a cell from the two couples and use Kf1/Kf2 in the Nernst equation at equilibrium.
Exam Note: Co(III) complexes are far more stable than Co(II).
Question 111. The voltage of the cell: Zn(s) | Zn(CN)42– (0.45 M), CN– (2.65 × 10–3 M) || Zn2+ (3.84 × 10–4 M) | Zn(s) is +0.099 V. Calculate the instability constant for Zn(CN)42– if only complexation resulting in Zn2+ + 4CN– → Zn(CN)42–.
Solution. Zn → Zn2+ + 2e (L.H.S., anode); Zn2+ + 2e → Zn (R.H.S., cathode). Ecell = (0.059/2) log([Zn2+]R.H.S./[Zn2+]L.H.S.): 0.099 = (0.059/2) log(3.84 × 10–4/[Zn2+]L.H.S.), so [Zn2+]L.H.S. = 1.69 × 10–7 M.
For [Zn(CN)4]2– ⇌ Zn2+ + 4CN–: Kinst = [Zn2+][CN–]4/[Zn(CN)42–] = (1.69 × 10–7 × (2.65 × 10–3)4)/0.45 = 1.85 × 10–17.
Teacher's Note: The concentration cell reveals free Zn2+ on the complex side; Kinst follows.
Exam Note: Kinst is the inverse of formation constant.
Question 112. Calculate the equilibrium constant at 25°C for the disproportionation of 3 mole of aqueous HNO2 to yield NO and NO3– ions. The E° for reduction of HNO2 to NO is 0.99 V and E° for reduction of NO3– to HNO2 is 0.94 V.
Solution. 3HNO2 → 2NO + NO3– + H+ + H2O (i.e. N3+ → N5+ + 2e; 2N3+ + 2e → 2N2+), n = 2.
E°cell = E°OP(HNO2/NO3–) + E°RP(HNO2/NO) = –0.94 + 0.99 = 0.05 V.
E°cell = (0.059/2) log Kc: 0.05 = (0.059/2) log Kc, Kc = 49.5 (book 49.53).
Teacher's Note: HNO2 acts as both oxidant (to NO) and reductant (to NO3–).
Exam Note: n = 2 for the net change.
Question 113. The standard electrode potential corresponding to reaction: Au3+(aq.) + 3e → Au(s) is 1.42 V. Predict if gold can be dissolved in 1 M HCl solution and on passing hydrogen gas through gold salt solution, metallic gold will be precipitated or not.
Solution. E°RP (Au3+/Au) = 1.42 V, E°OP (Au/Au3+) = –1.42 V; for H+ + e → ½H2, E°RP = 0 and E°OP = 0.
Gold in HCl: Au + 3H+ → Au3+ + (3/2)H2 has E° = –1.42 V (negative), so gold will not dissolve in HCl.
Passing H2 into Au3+: (3/2)H2 → 3H+ + 3e; Au3+ + 3e → Au: E° = E°OP(H) + E°RP(Au) = +1.42 V (positive), so H2 reduces Au3+ and metallic gold will be precipitated.
Teacher's Note: Positive E°cell means spontaneous; gold is a noble metal, so it resists acids but its ions are easily reduced.
Exam Note: Check both directions separately.
Question 114. For the cell: Ag(s) | AgBr(s) | KBr(aq.) | Hg2Br2(s) | Hg(l), the variation of emf with temperature is shown by the graph given below (a straight line rising from E = 0.066 V at 293 K to E = 0.070 V at 303 K; the book prints the first electrode as As(s), taken here as Ag). (a) Write the cell reaction. (b) Calculate ΔG, ΔH and ΔS at 298 K.
Solution. (a) Cathode: Hg2Br2(s) + 2e → 2Hg(l) + 2Br–(aq.); anode: 2Ag(s) + 2Br– → 2AgBr(s) + 2e. Cell reaction: Hg2Br2(s) + 2Ag(s) → 2Hg(l) + 2AgBr(s).
(b) From the graph: (∂E/∂T)P = (0.070 – 0.066)/10 = 0.0004 V/K; E at 298 K = 0.068 V; n = 2.
ΔG = –nFE = –2 × 96500 × 0.068 = –13124 J = –13.124 kJ.
ΔH = –nF[E – T(∂E/∂T)P] = –2 × 96500[0.068 – 298 × 0.0004] = 9881.6 J = 9.882 kJ.
ΔS = nF(∂E/∂T)P = 2 × 96500 × 0.0004 = 77.2 J K–1.
Teacher's Note: Slope of the E–T graph gives ΔS = nF(dE/dT); ΔH = ΔG + TΔS.
Exam Note: Read E at 298 K from the straight line.
Question 115. Determine the degree of hydrolysis and hydrolysis constant of aniline hydrochloride if: Pt(H2) | H+ (1 M) || C6H5NH3Cl (1/32 M) | H2 Pt; Ecell = –0.188 V at 300 K. (H2 at 1 atm on both sides)
Solution. Anode: ½H2 → H+ + e; cathode: H+ + e → ½H2. Ecell = 0.059 log[H+]R.H.S. (the L.H.S. is 1 M): –0.188 = 0.059 log[H+], so [H+] = 6.51 × 10–4 M.
C6H5NH3+ + H2O ⇌ C6H5NH2 + H3O+: [H+] = c·h = (1/32) × h, so h = 2.08 × 10–2.
KH = ch2 = (1/32)(2.08 × 10–2)2 = 1.352 × 10–5.
Teacher's Note: Measured cell emf gives [H+] of the salt solution; h = [H+]/c.
Exam Note: Kh = ch2 for small h.
Question 116. Peroxodisulphate salts (e.g., Na2S2O8) are strong oxidising agents used as bleaching agents for fats, oils and fabrics. Can oxygen gas oxidise sulphate ion SO42– to peroxide sulphate ion S2O82– in acidic solution with O2(g) being reduced to water? Given, O2(g) + 4H+(aq.) + 4e → 2H2O; E° = 1.23 V and S2O82–(aq.) + 2e → 2SO42–; E° = 2.01 V
Solution. Net reaction: 4SO42– + O2 + 4H+ → 2S2O82– + 2H2O (the book writes the S2O82– coefficient as 1; electrons balance at 4).
E°cell = E°OP(SO42–/S2O82–) + E°RP(O2/H2O) = –2.01 + 1.23 = –0.78 V.
E°cell is negative, so oxygen will not oxidise SO42– to S2O82–.
Teacher's Note: Oxidant must have the higher reduction potential; here 1.23 V < 2.01 V.
Exam Note: State the negative E°cell clearly.
Question 117. E° of some elements are given as: I2 + 2e → 2I–, E° = +0.54 V; MnO4– + 8H+ + 5e → Mn2+ + 4H2O, E° = +1.52 V; Fe3+ + e → Fe2+, E° = +0.77 V; Sn4+ + 2e → Sn2+, E° = +0.1 V. (a) Select the strongest reductant and oxidant in these. (b) Select the weakest reductant and oxidant in these. (c) Select the spontaneous reaction from the changes given below: (i) Sn4+ + 2Fe2+ → Sn2+ + 2Fe3+ (ii) 2Fe2+ + I2 → 2Fe3+ + 2I– (iii) Sn4+ + 2I– → Sn2+ + I2 (iv) Sn2+ + I2 → Sn4+ + 2I–
Solution. (a) The larger the E°OP, the greater the tendency for oxidation: Sn2+ → Sn4+ + 2e has the maximum E°OP (–0.1 V), so strongest reductant: Sn2+ and its conjugate Sn4+ is the weakest oxidant.
(b) The larger E°RP, the stronger the oxidant: maximum E°RP is for MnO4– + 8H+ + 5e → Mn2+ + 4H2O (+1.52 V), so strongest oxidant: MnO4– and weakest reductant: Mn2+. (A stronger oxidant has a weaker conjugate reductant and vice versa.)
(c) (i) E°cell = –0.77 + 0.1 = –0.67 V: non-spontaneous. (ii) –0.77 + 0.54 = –0.23 V: non-spontaneous. (iii) –0.54 + 0.1 = –0.44 V: non-spontaneous. (iv) E°cell = E°OP(Sn2+/Sn4+) + E°RP(I2/I–) = –0.1 + 0.54 = +0.44 V: spontaneous.
Teacher's Note: Spontaneous means E°cell > 0: oxidant’s E°RP must exceed reductant’s E°RP.
Exam Note: Answer (c): only change (iv).
Question 118. Two metals A and B have E°RP = –0.76 V and +0.80 V, which will liberate H2 from H2SO4?
Solution. For A: An+ + ne → A, E°RP = –0.76 V; for B: Bn+ + ne → B, E°RP = +0.80 V; H+ + e → ½H2, E°RP = 0.
A with H2SO4: 2A + nH2SO4 → A2(SO4)n + nH2; E°cell = E°OP(A) + E°RP(H) = +0.76 + 0 = +0.76 V (positive), so the reaction is spontaneous: A will liberate H2 from H2SO4.
B with H2SO4: E°cell = E°OP(B) + E°RP(H) = –0.80 + 0 = –0.80 V (negative), so B will not liberate H2 from H2SO4.
Teacher's Note: Metals with negative E°RP (above hydrogen in the series) displace H2 from dilute acids.
Exam Note: Compare with the H+/H2 couple at 0.00 V.
Step-by-Step P Bahadur Solutions for JEE Math
Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 7 Electrolysis Electrochemical Cells Part 1
Explore reliable mathematical solutions for P Bahadur Solutions Numerical Chemistry Chapter 7 Electrolysis Electrochemical Cells Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Mastering Core Concepts with P Bahadur Solutions
Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.
Additional Study Materials for 2026
In addition to these P Bahadur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.