P Bahadur Solutions Numerical Chemistry Chapter 5 Periodic Properties Chemical Bonding Complexes

Official P Bahadur Textbook Solutions: JEE Chemistry Chapter 05 Periodic Properties Chemical Bonding Complexes

Explore reliable textbook solutions for Chapter 05 Periodic Properties Chemical Bonding Complexes tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Chapter-wise Solutions for Chemistry: Chapter 05 Periodic Properties Chemical Bonding Complexes

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 5 Periodic Properties, Chemical Bonding and Complexes - Numerical Problems, Objective Problems and Matching (pages 1-28)

Numerical Problems

Question 1. Specific heats of Li(s), Na(s), K(s), Rb(s) and Cs(s) at 398 K are 3.57, 1.23, 0.756, 0.363 and 0.242 J g-1 K-1 respectively. Compute the molar heat capacities of these elements and identify any periodic trend. If there is trend, use it to predict molar heat capacity of Fr.

Solution.

Molar heat capacity (J mol-1 K-1) = atomic mass × specific heat (J g-1 K-1).

ElementCalculationMolar heat capacity
Li(s)6.94 × 3.5724.78
Na(s)22.99 × 1.2328.28
K(s)39.10 × 0.75629.56
Rb(s)85.47 × 0.36331.03
Cs(s)132.91 × 0.24232.16

There is a trend: the values rise regularly with atomic number. On plotting these values against atomic number, the extrapolation of the graph gives the value for Fr(s) = 33.5 J K-1 mol-1.

Teacher's Note: Molar heat capacity = atomic mass × specific heat; it rises down the group, so extrapolate for Fr.

Exam Note: Show the multiplication for each element.

Question 2. Calculate the energy required to convert 5 mole of sodium atom in the gaseous state to form sodium ion. Ionisation enthalpy of Na = 5.1 eV / atom.

Solution.

IE of Na = 5.1 eV/atom = 5.1 × 6.023 × 1023 eV/mol = 5.1 × 6.023 × 1023 × 1.602 × 10-19 J/mol = 492.09 × 103 J/mol.

Energy required to convert 5 mole Na(g) to Na+ = 5 × 492.09 × 103 J = 2.46 × 106 J.

Teacher's Note: Convert eV per atom to J per mole using NA and 1.602×10-19 J/eV, then multiply by moles.

Exam Note: Carry units through; final answer in joules.

Question 3. Calculate the energy required to convert 7.974 g of cesium atom in the gaseous state to form Cs+ ions. Ionisation enthalpy of Cs = 374 kJ mol-1 and atomic mass of Cs is 132.9 amu.

Solution.

Moles of Cs atoms = 7.974/132.9 = 0.06.

Energy required = 374 × 0.06 = 22.44 kJ.

Teacher's Note: Find moles first, then multiply by the molar ionisation enthalpy.

Exam Note: Moles × enthalpy per mole; state kJ.

Question 4. Calculate the effective nuclear charge at the periphery of nitrogen atom when an extra electron is added in the formation of anion. Also calculate the effective nuclear charge of N-atom and O-atom.

Solution.

Use Slater’s rule: σ = (0.35 × electrons in the same n shell excluding the test electron) + (0.85 × electrons in the (n−1) shell) + (1.0 × electrons in inner shells).

In N- ion: σ = (0.35 × 5) + (0.85 × 2) = 3.45; Z* = Z − σ = 7 − 3.45 = 3.55.

In N-atom: σ = (0.35 × 4) + (0.85 × 2) = 3.1; Z* = 7 − 3.1 = 3.9.

O-atom (1s2 2s2 2p4): σ = (0.35 × 5) + (0.85 × 2) = 3.45; Z* = 8 − 3.45 = 4.55.

Teacher's Note: Slater: 0.35 per same-shell electron, 0.85 per (n−1) electron; adding an electron raises σ and lowers Z*.

Exam Note: Write σ before Z* = Z − σ.

Question 5. Shielding constant for Ne is 4.15. Calculate the effective nuclear charge on Na+ and F- using only this value.

Solution.

Ne, Na+ and F- are isoelectronic: 1s2 2s2 2p6. Thus the shielding constant σ is the same for all of these, i.e., 4.15.

Z*Ne = 10 − 4.15 = 5.85

Z*Na+ = 11 − 4.15 = 6.85

Z*F- = 9 − 4.15 = 4.85

Teacher's Note: Isoelectronic ions share the same σ, so Z* = Z − 4.15 differs only through the nuclear charge Z.

Exam Note: State that σ is the same for isoelectronic species.

Question 6. The ionization energy of Li is 5.39 eV. If ionization energy of H is 13.6 eV, then calculate the effective charge acting upon outermost electron of Li.

Solution.

Li has 1s2 2s1, so the outer electron has n = 2. Using En = (Zeff2/n2) × E1 (E1 = energy of first orbit of H-atom):

Zeff = n √(En/E1) = 2 × √(5.39/13.6) = 1.26

The effective nuclear charge is 1.26 because the 2s-electron is shielded by the 1s2-electrons. Also from Slater’s rule σLi = 0.85 × 2 = 1.70, so Z*Li = 3 − 1.70 = 1.30.

Teacher's Note: Hydrogen-like scaling: E ∝ Zeff2/n2; n = 2 for Li’s outer electron; Slater gives about 1.30.

Exam Note: Use n = 2, not 1.

Question 7. How much energy is given out when 1.0 g of chlorine atoms are converted into Cl- (g)? Electron affinity of Cl = −349 kJ/mol and atomic mass of Cl is 35.5 amu.

Solution.

Moles of Cl atoms = 1/35.5.

Energy released = (1/35.5) × 349 = 9.83 kJ.

Teacher's Note: Energy released = moles of atoms × magnitude of molar electron affinity.

Exam Note: Report as energy given out, 9.83 kJ.

Question 8. For the gaseous phase reaction, K + F → K+ + F-, ΔH was calculated under conditions where the cations and anions by electrostatic separation from combining with each other. The ionisation energy of K is 4.3 eV. What is electron affinity of fluorine?

Solution.

(The value of ΔH is not legible in the printed question; the book’s solution uses ΔH = 19 × 103 cal/mol.)

ΔH = 19 × 103 cal/mol = 19 × 103 × 4.18 J/mol = (19 × 103 × 4.18)/(1.602 × 10-19 × 6.023 × 1023) eV/atom = 0.82 eV/atom.

Also, ΔH = IE1 + EA1, so 0.82 = 4.3 + EA1, giving EA1 = −3.48 eV/atom, i.e. 3.48 eV is released per atom. (The book prints 3.48 eV/atom without the minus sign; as an enthalpy change it is −3.48 eV.)

Teacher's Note: ΔH of reaction = IE of K + electron gain enthalpy of F; solve for EA.

Exam Note: Keep the sign: EA is exothermic, −3.48 eV.

Question 9. The first IP of lithium is 5.41 eV and electron affinity of Cl is −3.61 eV. Calculate ΔH in kJ mol-1 for reaction: Li(g) + Cl(g) → Li+(g) + Cl-(g)

Solution.

ΔH per atom pair = IP1(Li) + EA(Cl) = 5.41 − 3.61 = 1.80 eV, since Li → Li+ + e (IP = +ve) and Cl + e → Cl- (EA = −ve).

ΔH/mol = 1.8 × 6.023 × 1023 × 1.602 × 10-19 × 10-3 kJ = 173.7 kJ.

Teacher's Note: Add IP (positive) and EA (negative) per atom, then convert eV to kJ per mole.

Exam Note: Sign each term, then convert units.

Question 10. If half of the atoms of ‘X’ transfer one electron to the other half of ‘X’ atoms, 409 kJ must be added. If these X- ions are subsequently converted to X+, an additional 733 kJ must be added. Calculate IP and EA of X in eV. Use (1 eV = 1.602 × 10-19 J and N = 6.023 × 1023).

Solution.

X → X+ + e, ΔH = IP1 = a eV. X + e → X-, ΔH = −EA1 = −b eV.

If N/2 atoms of X lose electrons which are taken up by the remaining N/2 atoms: a·N/2 − b·N/2 = 409 × 103/(1.602 × 10-19) eV, so a − b = (409 × 103 × 2)/(1.602 × 10-19 × 6.023 × 1023) = 8.477.

Now N/2 of X- lose two electrons to give X+ (X- → X + e, ΔH = +b; X → X+ + e, ΔH = +a): (a + b)N/2 = 733 × 103/(1.602 × 10-19) eV, so a + b = 15.194.

Hence a = 11.835 eV and b = 3.358 eV. IP = 11.835 eV; EA = 3.358 eV (energy released on electron capture).

Teacher's Note: Set up two equations: (a − b) from the first step and (a + b) from the second, then solve.

Exam Note: Define a and b clearly before solving.

Question 11. Helium can be excited to the 1s12p1 configuration by light of 58.44 nm. The lowest excited singlet state, with the configuration 1s1, 2s1 lies 4857 cm-1 below the 1s12p1 state. What would the average He—H bond energy have to be in order that HeH2 could form non-endothermically from He and H2? Assume that the compound would form from the lowest excited singlet state of helium. Neglect any differences between ΔE and ΔH. Take ΔHf (H) = 218.0 kJ / mol.

Solution.

Formation of HeH2 requires energy equal to the sum of (i) the energy for excitation from 1s2 to 1s12s1 to form He singlet, i.e. [energy needed for excitation from 1s2 to 1s12p1 − energy level difference between 1s12s1 and 1s12p1]:

EHe singlet = hc/λ1 − hc/λ2 = 3.40 × 10-18 − 9.66 × 10-20 J = 3.30 × 10-18 J/molecule, where λ1 = 58.44 × 10-9 m and 1/λ2 = 4857 cm-1.

(ii) energy to produce two mole of H, i.e. 2 × 218.0 = 436 kJ/mol.

E for 2 mole bonds of He—H = [3.30 × 10-18 × 6.023 × 1023 + 436 × 103] J/mol = 2423.5 kJ mol-1.

Therefore EHe—H = 1211.8 kJ mol-1 (average per bond).

Teacher's Note: Bond energy needed = (excitation energy + energy to atomise H2) shared over two He–H bonds.

Exam Note: Divide the total energy by two bonds at the end.

Question 12. 1 g of Mg atoms in the vapour phase absorbs 50.0 kJ of energy. Find the composition of Mg+ and Mg2+ formed as a result of absorption of energy. IE1 and IE2 for Mg are 740 and 1450 kJ mol-1 respectively.

Solution.

Mole of Mg = 1/24. Let a mole of Mg+ be formed; the rest (1/24 − a) forms Mg2+ (needs 740 + 1450 = 2190 kJ/mol).

a × 740 + (1/24 − a) × 2190 = 50, so a = 0.02845.

% of Mg+ = (0.02845/(1/24)) × 100 = 68.28; % of Mg2+ = 31.72.

Teacher's Note: Mg2+ needs IE1 + IE2 = 2190 kJ/mol; split the moles using the energy balance.

Exam Note: Use 2190 kJ/mol for Mg2+, not 1450.

Question 13. Anhydrous AlCl3 is covalent. From the data given below, predict whether it would remain covalent or become ionic in aqueous solution. (Ionisation energy for AlCl3 = 5137 kJ mol-1; ΔHydration for Al3+ = −4665 kJ mol-1; ΔHydration for Cl- = −381 kJ mol-1). (IIT July 1997)

Solution.

AlCl3 + aq. → AlCl3(aq.); ΔH = energy released during hydration + energy used during ionisation = −4665 − 3 × 381 + 5137 = −671 kJ.

Thus, formation of ions will take place because ΔHhydration > ΔHionisation. AlCl3 becomes ionic in aqueous solution.

Teacher's Note: Compare total hydration energy with ionisation energy; a net negative ΔH means ionisation is favoured.

Exam Note: Show net ΔH = −671 kJ and conclude ionic.

Question 14. A mixture contains atoms of fluorine and chlorine. The removal of an electron from each atom of sample absorbs 284 kJ while the addition of an electron to each atom of mixture releases 68.8 kJ. Determine the percentage composition of mixture. Given IE1 for F and Cl are 27.91 × 10-22 and 20.77 × 10-22 kJ / atom respectively and EA1 for F and Cl are −5.53 × 10-22 and −5.78 × 10-22 kJ / atom respectively.

Solution.

Let the mixture contain a, b atoms of F and Cl respectively. Total energy absorbed: 284 = a × 27.91 × 10-22 + b × 20.77 × 10-22 …(1)

Total energy released: 68.8 = a × 5.53 × 10-22 + b × 5.78 × 10-22 …(2)

By Eqs. (1) and (2): a = 4.57 × 1022, b = 7.53 × 1022.

% of F = [4.57 × 1022/(4.57 × 1022 + 7.53 × 1022)] × 100 = 37.76 (unrounded values give about 37.8); % of Cl = 62.24 (about 62.2).

Teacher's Note: Two unknowns, two energy equations: ionisation energy absorbed and electron-gain energy released.

Exam Note: Solve simultaneously; give both percentages.

Question 15. The first ionisation energy of H and He are 13.6 eV and 24.6 eV respectively. How much energy would be given out during the formation of ground state of He atom from He2+ nucleus if it combines with two electrons?

Solution.

Given H → H+ + e, IE1 = 13.6 eV; He → He+ + e, IE1 = 24.6 eV. We have to determine the values of He2+ + e → He+, ΔH = a; He+ + e → He, ΔH = b; so He2+ + 2e → He, ΔH = (a + b).

IE1 of He+ = IE1(H) × 22 = 13.6 × 4 = 54.4 eV, so a = −54.4 eV. Also for He+ + e → He, IE1 = 24.6 eV, so b = −24.6 eV.

Total energy given out = a + b = −54.4 + (−24.6) = −79 eV (79 eV is released).

Teacher's Note: He+ is hydrogen-like, so its IE is Z2 × 13.6 eV; add both capture steps.

Exam Note: Add both steps: 54.4 + 24.6 = 79 eV.

Question 16. The ionisation energy of lithium is 5.40 eV. If ionisation energy of H-atom is 13.6 eV, then calculate the effective charge acting upon outermost electron of Li.

Solution.

Li: 1s2, 2s1, so n = 2. ELi = (Z2/n2) × EH, where Z is the effective charge.

Z = n √(ELi/EH) = 2 × √(5.40/13.6) = 1.26

Thus effective charge is 1.26 because the 2s electron is shielded by the 1s2 electrons.

Teacher's Note: Same hydrogen-like method as Question 6, with IE(Li) = 5.40 eV.

Exam Note: Quote Zeff = 1.26 with n = 2.

Question 17. Calculate the electronegativity of fluorine from the following data: EH—H = 104.2 kcal mol-1, EF—F = 36.6 kcal mol-1, EH—F = 134.6 kcal mol-1. (UPSEAT 1996)

Solution.

XH ~ XF = 0.208 [EH—F − (EH—H × EF—F)1/2]1/2 = 0.208 [134.6 − (104.2 × 36.6)1/2]1/2 = 1.78.

Since XH < XF and XH = 2.1 (although this value is not given in the problem), XF = 2.1 + 1.78 = 3.88.

Teacher's Note: Pauling difference uses the excess of the H–F bond energy over the geometric mean of H–H and F–F.

Exam Note: Add the difference 1.78 to XH = 2.1.

Question 18. Ionisation potential and electron affinity of fluorine are 17.42 and 3.45 eV respectively. Calculate electronegativity of fluorine.

Solution.

The various equations to calculate electronegativity (X) are: Mulliken scale XM = (IE + EA)/2, where IE and EA are in eV. Pauling values are 1/2.8 times lesser than Mulliken value, so XP = 0.336[XM − 0.615], or XP = (IE + EA)/(2 × 2.8) = (IE + EA)/5.6.

Electronegativity of F on Pauling scale = (17.42 + 3.45)/5.6 = 3.73.

Electronegativity of F on Mulliken scale = (17.42 + 3.45)/2 = 10.435.

Teacher's Note: Mulliken X = (IE + EA)/2; divide by 2.8 to convert to the Pauling scale.

Exam Note: Name the scale with each value.

Question 19. Calculate the electronegativity X of silicon using Allred-Rochow equation: X = 0.359Z*/r2 + 0.744 where Z* is Zeffective calculated on the basis of Slater’s rule taking all the electrons. Covalent radius of Si = 1.175 Å.

Solution.

Electronic configuration of Si: 1s2, 2s2 2p6, 3s2 3p2. Zeffective = Z − σ, where σ = [ns and np electrons excluding test electron × 0.35] + [(n − 1) electrons × 0.85] + [(n − 2) electrons × 1.0].

Z = 14 − [3 × 0.35 + 8 × 0.85 + 2 × 1.0] = 4.15.

X = (0.359 × 4.15)/(1.175)2 + 0.744 = 1.82

(Note: if n = 1 then for the 1s electron the value is 1s electrons × 0.30.)

Teacher's Note: Compute Z* by Slater’s rule (4.15), then substitute into Allred–Rochow with r in Å.

Exam Note: Show σ, Z*, then X = 1.82.

Question 20. The boiling point of krypton (Kr) and radon (Rn) are −152°C and −62°C respectively. Calculate the approximate boiling point of xenon.

Solution.

The zero group members are He, Ne, Ar, Kr, Xe, Rn. Law of triad suggests that property of a middle element in a group of three is average of its two adjacent elements.

b.pt. of Xe = (b.pt. of Kr + b.pt. of Rn)/2 = (−152 + (−62))/2 = −214/2 = −107°C.

Teacher's Note: Dobereiner’s triad: the middle element’s property is the mean of its neighbours (Kr, Xe, Rn).

Exam Note: Average Kr and Rn values with signs.

Question 21. Calculate the % ionic character in HCl molecule. Given bond length of HCl is 1.275 Å and μHCl = 1.03 debye.

Solution.

μHCl = δ × d (dipole moment). μ = 1.03 D = 1.03 × 10-18 esu cm and d = 1.275 Å = 1.275 × 10-8 cm.

1.03 × 10-18 = δ × 1.275 × 10-8, so δ = 0.808 × 10-10 esu.

Since 4.803 × 10-10 esu charge means % ionic nature = 100, % ionic nature of HCl = (100 × 0.808 × 10-10)/(4.803 × 10-10) = 16.82%.

Teacher's Note: Find the partial charge δ = μ/d, then compare with a full electronic charge (4.803×10-10 esu).

Exam Note: Convert D to esu cm and Å to cm.

Question 22. The dipole moment of LiH is 1.964 × 10-29 cm and the intermolecular distance between Li and H in this molecule is 1.596 Å. What is per cent ionic character in molecule?

Solution.

μmolecule = δ × d, so 1.964 × 10-29 = δ × 1.596 × 10-10, giving δ = 1.2306 × 10-19 coulomb.

% of ionic nature = (1.2306 × 10-19/1.602 × 10-19) × 100 = 76.82%.

(The dipole moment is in coulomb metre; the unit is printed as “cm” in the question.)

Teacher's Note: δ = μ/d in coulomb, then divide by the electronic charge 1.602×10-19 C.

Exam Note: Keep SI units: C m and m.

Question 23. The dipole moment of KCl is 3.336 × 10-29 coulomb metre which indicates that it is a highly polar molecule. The interatomic distance between K+ and Cl- in this molecule is 2.6 × 10-10 m. Calculate the dipole moment of KCl molecule, if there were opposite charges of one fundamental unit located at each nucleus. Calculate percentage ionic character of KCl. (IIT 1993)

Solution.

Dipole moment μ = δ × d, so 3.336 × 10-29 = δ × 2.6 × 10-10, giving δ = 1.283 × 10-19 coulomb.

Since 1.602 × 10-19 charge on each end means % character = 100, % character = (1.283 × 10-19/1.602 × 10-19) × 100 = 80.09%.

If one unit charge, δ = 1.602 × 10-19 C, so μ = 1.602 × 10-19 × 2.6 × 10-10 = 4.1652 × 10-29 coulomb metre.

Teacher's Note: Ionic character = observed μ / μ for full unit charges at the same distance.

Exam Note: Give both: 4.17×10-29 C m and 80.09%.

Question 24. A diatomic molecule has a dipole moment equal to 1.2 D. If bond length is 1.0 Å, what fraction of electronic charge ‘e’ exists on each atom?

Solution.

δ = Dipole moment/d = (1.2 × 10-18 esu cm)/(1.0 × 10-8 cm) = 1.2 × 10-10 esu.

Fraction of electronic charge on each end = (1.2 × 10-10)/(4.8 × 10-10) = 0.25 = 25% of ‘e’.

Teacher's Note: Fractional charge = (μ/d)/e, using 1 D = 10-18 esu cm and e = 4.8×10-10 esu.

Exam Note: Answer as fraction 0.25 of e.

Question 25. The experimental dipole moment of water molecule is 1.84 D. Calculate the bond angle H—O—H in water molecule, if dipole moment of OH bond is 1.5 D.

Solution.

μ = √(μ12 + μ12 + 2μ1μ1 cos α); in H2O only two dipoles equal to μ1 are operating due to two O—H bonds.

1.84 = √((1.5)2 + (1.5)2 + 2 × (1.5) × (1.5) cos α), so cos α = −0.2476 and α = 104°20′.

Teacher's Note: Resultant of two equal bond moments: μ = 2μ1 cos(α/2); solve for the angle.

Exam Note: Write the vector-addition formula first.

Question 26. The H—O—H bond angle in the water molecule is 105°, the H—O bond distance being 0.94 Å. The dipole moment for the molecule is 1.85 D. Calculate the charge on the oxygen atom.

Solution.

H2O has two vectors of O—H bond acting at 105°. Let the dipole moment of O—H bond be a: μH2O = √(μOH2 + μOH2 + 2μOH2 cos 105°), so 1.85 = √(2a2(1 + cos 105°)), i.e. a = μO—H = 1.52 debye = 1.52 × 10-18 esu cm.

Now μO—H = δ × d, so 1.52 × 10-18 = δ × 0.94 × 10-8, giving δ = 1.617 × 10-10 esu.

Since O acquires 2δ charge (one δ charge from each bond), charge on O atom = 2δ = 2 × 1.617 × 10-10 = 3.23 × 10-10 esu (the book prints the unit as esu cm).

Teacher's Note: First resolve the bond moment from the molecular moment, then δ = μ/d; oxygen carries 2δ.

Exam Note: Oxygen gets 2δ because it has two bonds.

Question 27. Assuming that all the four valency of carbon atom in propane pointing towards tetrahedral corners of a regular tetrahedron, calculate the distance between the terminal carbon atoms in propane. Given, C—C single bond length is 1.54 Å.

Solution.

The angle θ = 109°28′ and ZB = AZ = 1.54 Å, with O the midpoint of AB. AO/AZ = sin(θ/2) = sin(109°28′/2) = sin 54°44′ = sin 54.73°.

AO = 0.816 × AZ = 0.816 × 1.54 = 1.257 Å, so AB = 2 × AO = 2 × 1.257 = 2.514 Å.

Teacher's Note: Isosceles triangle with apex angle 109°28′: base = 2 × bond length × sin(θ/2).

Exam Note: Use half the tetrahedral angle.

Question 28. In BI3 molecule, distance between two I atoms is found to be 3.54 Å. Also BI3 has sp2-hybridised boron atom. If radius of covalently bonded I atom is 1.33, what will be covalent radius of boron?

Solution.

The BI3 molecule is coplanar in nature (I—B—I = 120°). With O the midpoint of the I···I distance: IO/BI = sin 60°, so IO = BI sin 60°, i.e. 3.54/2 = BI × 0.867, giving BI = 2.04 Å.

Covalent radius of boron = BI − covalent radius of I = 2.04 − 1.33 = 0.71 Å.

Teacher's Note: Half the I–I distance equals B–I × sin 60°; subtract iodine’s radius from B–I.

Exam Note: Subtract r(I) from the B–I length.

Question 29. Calculate the molar mass of HF if density of HF gas is 3.17 g / L at 300 K and 1.0 atm. Comment on the result.

Solution.

PV = (w/M)RT, so P = (w/(V·M))RT, or M = dRT/P = (3.17 × 0.0821 × 300)/1 = 78.08 g mol-1.

Corrected: the normal molar mass of HF is 1 + 19 = 20 g mol-1 (the book prints 1 + 18 = 19). Since 78.08/20 ≈ 4, HF in gaseous state forms a tetramer due to strong H-bonding.

Teacher's Note: M = dRT/P; compare with formula mass 20 to find the degree of association.

Exam Note: Conclude (HF)4 from 78/20 ≈ 4.

Question 30. Atomic radius of F(g) and F-(g) are 72 and 136 pm respectively. Calculate the ratio and percentage increase in terms of volume during the formation of F-(g) from F(g).

Solution.

Volume of F(g) = (4/3)πr3 = (4/3) × π × (72)3 = 1.56 × 106; volume of F-(g) = (4/3) × π × (136)3 = 10.53 × 106 (in units of pm3).

VF-/VF = (136)3/(72)3 = 6.74.

Increase in volume = (10.53 − 1.56) × 106 = 8.97 × 106, so % increase = (8.97 × 106/1.56 × 106) × 100 = 5.75 × 102 % (exact cube ratio gives about 574%).

Teacher's Note: Volume scales as r3; percentage increase = (ratio − 1) × 100.

Exam Note: Cube the radii ratio, then subtract 1.

Question 31. The multiple double bond radii of C is 0.67 Å. Calculate the multiple double bond radii of O if oxygen to oxygen bond length in CO2 is 2.323 Å.

Solution.

CO2 is O=C=O. Thus, O to O bond length in CO2 can be given as 2.323 = 2 × radius of (O=) + 2 × radii of (C=) = 2 × radius of (O=) + 2 × 0.67.

Radius of (O=) = 0.49 Å.

Teacher's Note: O···O distance in linear O=C=O is 2r(O) + 2r(C); solve for r(O).

Exam Note: Count two radii of each atom.

Question 32. The atomic radius of Li and Li+ are 1.23 Å and 0.76 Å respectively. Assuming that the difference in ionic radii relates to the space occupied by 2s-electron, calculate the % volume of Li-atom occupied by single valence electron.

Solution.

Volume of Li+ = (4/3)π(0.76 × 10-8)3; volume of Li = (4/3)π(1.23 × 10-8)3.

Volume occupied by 2s electron = (4/3)π[(1.23 × 10-8)3 − (0.76 × 10-8)3] = (4/3)π × 1.422 × 10-24.

% volume occupied by 2s electron = [(4/3)π × 1.422 × 10-24/(4/3)π × (1.23 × 10-8)3] × 100 = 76.4% (the book prints 76.45).

Teacher's Note: Valence-electron volume = V(atom) − V(cation); take the ratio to V(atom).

Exam Note: Fraction = 1 − (r+/r)3.

Question 33. In solid ammonia, each NH3 molecule has six other NH3 molecules as nearest neighbours. ΔH of sublimation of NH3 at the melting point is 30.8 kJ/mol and the estimated ΔH in the absence of hydrogen bonding is 14.4 kJ / mol. What is the strength of hydrogen bond in solid ammonia?

Solution.

Total strength of all hydrogen bonds = 30.8 − 14.4 = 16.4 kJ/mol.

There are 6 nearest neighbours, but each hydrogen bond involves 2 ammonia molecules; hence 3 H-bonds per molecule.

Strength of each H-bond in solid NH3 = 16.4/3 = 5.5 kJ/mol.

Teacher's Note: Subtract the no-H-bond sublimation enthalpy, then divide by 3 (six neighbours, each bond shared by two).

Exam Note: Divide by 3, not 6.

Question 34. Assuming covalent radii to be additive property; calculate the iodine-iodine distances in o-, m-, p-di-iodobenzene. The benzene ring is regular hexagon and each C—I bond lies on a line passing through the centre of hexagon. The C—C bond length in C6H6 are 1.40 Å and covalent radius of iodine and carbon atom are 1.33 Å and 0.77 Å. Also neglect different overlapping effect.

Solution.

(a) o-di-iodobenzene: The distance between two I atoms AB = AO = OB, because ΔAOB is an equilateral triangle. AB = OP + PA = OP + covalent radius of C + covalent radius of I = OP + 0.77 + 1.33 = 1.40 + 1.33 + 0.77 (OP = OQ = PQ, because ΔOPQ is equilateral and PQ = C—C bond length). AB = 3.50 Å.

(b) m-di-iodobenzene: AB = AC + BC = 2AC (since AC = BC) = 2AO cos 30° = 2(AP + OP) cos 30° (OP = PR since ΔPOR is equilateral) = 2(2.10 + 1.40) × 0.866 = 6.06 Å [AP = covalent radius of C + covalent radius of I = 0.77 + 1.33 = 2.10 Å and PR = covalent bond length of C—C = 1.40].

(c) p-di-iodobenzene: AB = OA + OB = 2OA = 2(OP + PA) = 2 × (PQ + PA) (since OP = PQ; ΔOPQ is equilateral) = 2 × (1.40 + 0.77 + 1.33) = 7.0 Å.

Teacher's Note: Place the ring centre O: the C–I line passes through O; use hexagon geometry (60°, 120°, 180°).

Exam Note: State ortho 3.50, meta 6.06, para 7.0 Å.

Question 35. Calculate the I—I distance in the given compound H2C=CI2 if C—I bond length is 2.10 Å.

Solution.

CH2=CI2 has sp2-hybridised carbon and thus I—C—I bond angle is 120°. In ΔICI, IO/CI = sin 60° [∠ICO = 60° and ∠IOC = 90°], so IO = CI sin 60° = 2.10 × 0.866 = 1.8186 Å.

I—I distance = 2 × 1.8186 = 3.64 Å.

Teacher's Note: sp2 carbon: I–C–I = 120°; half the I–I distance = (C–I) sin 60°.

Exam Note: Double the half-distance for I–I.

Question 36. What type of hybridisation are expected on central atom of each of the following molecule: (a) BeH2 (b) CH2Br2 (c) PF6- (d) BF3 (e) CH22+ (f) CH3+ (g) CH3- (h) SF6 (i) ICl3 (j) AlH3 (k) NH3 (l) SbF6- (m) BH4- (n) ClO4- (o) I3- (p) ClO3- (q) ClO3+.

Solution.

(a) sp (b) sp3 (c) sp3d2 (d) sp2 (e) sp (f) sp2 (g) sp3 (h) sp3d2 (i) sp3d (j) sp2 (k) sp3 (l) sp3d2 (m) sp3 (n) sp3 (o) sp3d (p) sp3 (q) sp2.

Corrected: the book prints sp2 for (b); CH2Br2 has four sigma bonds on carbon and no lone pair, so it is sp3. (Species (e) is read as CH22+ from the scan.)

Teacher's Note: Count steric number = sigma bonds + lone pairs: 2 sp, 3 sp2, 4 sp3, 5 sp3d, 6 sp3d2.

Exam Note: Write steric number before naming hybridisation.

Question 37. Point out the nature of hybridisation on underlined atoms: (a) F2C=C=CF2 (b) F2B—C≡C—BF2 (c) C(CN)4.

Solution.

(a) sp2, sp, sp2 (the three carbons of the allene unit, in order).

(b) sp2, sp, sp, sp2 (B, C, C, B).

(c) The central carbon is sp3; the carbon of each CN group is sp.

Corrected: the book prints “sp2 on all four carbon of CN”; a C≡N carbon has two sigma bonds and no lone pair, so it is sp-hybridised.

Teacher's Note: Count sigma bonds + lone pairs on each atom; triple-bonded C and B in BF2 differ.

Exam Note: Name the hybridisation for each underlined atom.

Question 38. Draw the molecular structures of XeF2, XeF4 and XeO2F2 indicating the location of lone pair(s) of electrons.

Solution.

XeF2: Xe is in sp3d-hybridised state having three lone pair of electrons located equatorially and thus, shape is linear (F—Xe—F axial, three lone pairs in the equatorial plane).

XeF4: Xe is in sp3d2-hybridised state having two lone pair of electrons located axially (above and below the plane) and thus, shape is square planar.

XeO2F2: Xe is in sp3d-hybridised state having one lone pair of electron at equatorial position and thus, shape is distorted trigonal pyramidal (see-saw); the two F atoms are axial, and the two O atoms and the lone pair are equatorial.

(The book draws these structures as figures; they are described in words here.)

Teacher's Note: Lone pairs go equatorial in trigonal bipyramids and axial in octahedra, which fixes the shape.

Exam Note: State hybridisation, lone-pair position and shape.

Question 39. Using VSEPR theory, identify the type of hybridisation and draw the structure of OF2. What are oxidation states of O and F? (IIT 1994)

Solution.

The structure of OF2 is V-shape due to sp3-hybridisation of oxygen with two lone pair of electrons on it (F—O—F angle about 105°).

Oxidation number of O and F are +2 and −1 respectively.

Teacher's Note: Oxygen has two bond pairs and two lone pairs, so sp3 and bent; F is more electronegative.

Exam Note: Mention +2 for O because F outranks it.

Question 40. Write the MO configuration of O2. Specify its bond order and magnetic properties. (IIT 2000)

Solution.

MO configuration of O2: σ1s2, σ*1s2, σ2s2, σ*2s2, σ2pz2, π2px2, π2py2, π*2px1, π*2py1.

Bond order = ½[No. of bonding electron − No. of antibonding electron] = ½[10 − 6] = 2.

Also O2 is paramagnetic as it has two unpaired electrons.

Teacher's Note: Fill 16 electrons; two unpaired electrons in degenerate π* orbitals give paramagnetism.

Exam Note: Give bond order 2 and paramagnetic.

Question 41. Predict the type of hybridisation of each carbon atom in the following: (a) CH3CN, (b) CH3CH=CH2, (c) H3C—C≡C—CH3, (d) HC≡C—CH=CH2. (IIT 1998)

Solution.

(a) sp3 and sp, (b) sp3, sp2 and sp2, (c) sp3, sp, sp and sp3, (d) sp, sp, sp2 and sp2.

Teacher's Note: Single-bonded C is sp3, C=C carbon sp2, triple-bonded carbon sp.

Exam Note: List carbons in the order written.

Question 42. Draw the geometry of OSF4 using VSEPR theory. (IIT 2004)

Solution.

S atom in OSF4 shows sp3d-hybridisation leading to trigonal bipyramidal geometry but distorted due to S=O bond. The F atoms are at axial and equatorial positions whereas oxygen being less electronegative occupies one of the three equatorial positions.

(The book shows the figure: two axial F, two equatorial F and one equatorial O.)

Teacher's Note: Five electron pairs on S give trigonal bipyramid; the double-bonded O sits equatorially.

Exam Note: State sp3d and O equatorial.

Question 43. Arrange the following compounds/species in the order of O—O bond lengths. O2, O2[AsF4], [KO2] (IIT 2004)

Solution.

The MO configuration of O2, O2+ in O2[AsF4] and O2- in K+O2- are: O2: σ1s2, σ*1s2, σ2s2, σ*2s2, σ2pz2, π2px2, π2py2, π*2px1, π*2py1; O2+ has only one electron in π* (π*2px1); O2- has π*2px2, π*2py1.

SpeciesO2O2+O2-
Bond order22.51.5

Higher the bond order, lesser is bond length. Thus O2+ < O2 < O2-, i.e. O2[AsF4] < O2 < KO2 in O—O bond length.

Teacher's Note: Bond order 2.5, 2, 1.5 for O2+, O2, O2-; length varies inversely with order.

Exam Note: Link each salt to its dioxygen ion.

Question 44. A solution containing 2.665 g of CrCl3·6H2O is passed through a cation exchanger. The chloride ions obtained in solution were treated with excess of AgNO3 to give 2.87 g of AgCl. Deduce the structure of compound.

Solution.

Mole of AgCl obtained = mole of Cl- ions ionised from 2.665/266.5 mole of CrCl3·6H2O = 0.01 (molar mass of CrCl3·6H2O = 266.5).

Mole of Cl- ionised = 2.87/143.5 = 0.02.

Thus, 0.01 mole of complex CrCl3·6H2O gives 0.02 mole of Cl- on ionisation. Now, since co-ordination number of Cr is six and only one Cl ion is attached to Cr by co-ordinate bond or secondary valency, the complex is [CrCl(H2O)5]Cl2·H2O.

[CrCl(H2O)5]Cl2·H2O → [CrCl(H2O)5]2+ + 2Cl- + H2O; 2Cl- + 2AgNO3 → 2AgCl + 2NO3-.

Teacher's Note: Moles of free Cl- per mole of complex tell how many Cl are outside the coordination sphere.

Exam Note: Ratio 2 Cl- per complex gives the formula.

Question 45. 1 g of the complex [Cr(H2O)5Cl]Cl2·H2O was passed through a cation exchanger. The acid liberated was diluted to 1 litre. What is normality of this acid solution?

Solution.

Molar mass of [Cr(H2O)5Cl]Cl2·H2O = 266.5, so mole of complex = 1/266.5.

Note: 1 mole of [Cr(H2O)5Cl]Cl2·H2O will give 2 mole of Cl- ions or 2 mole of HCl. Thus, mole of HCl formed = (2 × 1)/266.5.

NHCl = (2 × 1)/(266.5 × 1) = 0.0075.

Teacher's Note: Cation exchange replaces cations by H+; each outer Cl- gives one HCl.

Exam Note: Moles of HCl = 2 × moles of complex.

Question 46. A solution containing 0.319 g of complex CrCl3·6H2O was passed through cation exchanger and the solution given out was neutralised by 28.5 mL of 0.125 M NaOH. What is the correct formula of complex?

Solution.

The Cl atoms outside the co-ordination sphere will be ionised to produce acid HCl. Thus, Meq. of Cl- ions outside = Meq. of HCl formed = Meq. of NaOH used = 28.5 × 0.125 = 3.56.

0.319/266.5 mole or 1.197 m mole of complex produce 3.56 Meq. or milli mole of Cl-.

Thus, 1 mole of complex will give 3 mole of Cl-, i.e., all the three Cl atoms are outside the co-ordination sphere. Thus, complex is [Cr(H2O)6]Cl3.

Teacher's Note: Millimoles of NaOH equal millimoles of liberated HCl; compare with millimoles of complex.

Exam Note: Ratio 3 Cl- per complex gives the formula.

Question 47. Metal carbonyls having formula M(CO)x, where x is the number of carbonyl units co-ordinated to metal M are formed by Fe, Cr and Ni. If effective atomic number of each metal is 36, what are the formula of metal carbonyls?

Solution.

M(CO)x: In Fe(CO)x, EAN = At. no. of Fe + 2 × No. of ligands, i.e. CO: 36 = 26 + 2·x, so x = 5. Formula of iron carbonyl is Fe(CO)5.

Similarly, Cr(CO)6 (36 = 24 + 2x) and Ni(CO)4 (36 = 28 + 2x).

Teacher's Note: EAN = Z + 2×(number of CO) equals the krypton number 36; solve for the ligand count.

Exam Note: Write EAN equation for each metal.

Question 48. A metal complex having composition Cr(NH3)4Cl2Br has been isolated in two forms (A) and (B). The form (A) reacts with AgNO3 to give a white precipitate readily soluble in dilute aqueous ammonia, whereas (B) gives a pale yellow precipitate soluble in concentrated ammonia. Write the formulae of (A) and (B) and state the hybridisation of chromium in each. Calculate their magnetic moments (Spin-only value). (IIT 2009)

Solution.

Complex Cr(NH3)4Cl2Br has two isomers. Since co-ordination number of Cr is six, two forms may be: (B) [Cr(NH3)4Cl2]Br, which with AgNO3 gives [Cr(NH3)4Cl2]+ + NO3- + AgBr↓, a pale yellow precipitate soluble partially in conc. NH3, i.e. [Ag(NH3)2]Br; and (A) [Cr(NH3)4Br·Cl]Cl, which with AgNO3 gives [Cr(NH3)4ClBr]+ + NO3- + AgCl↓, a white precipitate soluble in dil. NH3, i.e. [Ag(NH3)2]Cl.

Hybridisation of Cr in (A) and (B) is d2sp3 having 3 unpaired electrons (3d3).

Magnetic moment = √(n(n + 2)) B.M. = √(3(3 + 2)) = 3.87 B.M.

Teacher's Note: The ion that precipitates with Ag+ is the free (ionisable) halide; Cr(III) is d3, so n = 3.

Exam Note: Match precipitate colour to the ionisable halide.

Question 49. Predict the number of water molecules (s) directly bonded to metal centre in CuSO4·5H2O.

Solution.

Cu2+ has co-ordination number four: [Cu(H2O)4]·SO4·H2O. Hence four water molecules are directly bonded to Cu.

Teacher's Note: Cu(II) is four-coordinate here; the fifth water is hydrogen-bonded to sulphate.

Exam Note: Answer 4, with the structure.

Question 50. What is the co-ordination number of Al in the crystalline state of AlCl3? (IIT 2009)

Solution.

In solid state AlCl3 exists as Al2Cl6 (two tetrahedra sharing an edge through two bridging Cl) and has co-ordination number four.

Teacher's Note: The dimer Al2Cl6 has two bridging chlorines, making each Al four-coordinate.

Exam Note: State Al2Cl6 and coordination number 4.

Question 51. What type of hybridisation exists in BeF2 in solid state?

Solution.

In solid state BeF2 exists as (BeF2)n, a polymer in which each Be is tetrahedrally surrounded by bridging F atoms. The hybridisation in (BeF2)n is sp3.

Teacher's Note: Solid BeF2 is polymeric with bridging F, so Be becomes four-coordinate and sp3.

Exam Note: Contrast with sp in gaseous monomer.

Question 52. Nitrogen forms oxides as N2O, NO, NO2, N2O3, N2O4 and N2O5. Which oxides contain N—N bonds? (IIT 2009)

Solution.

The book gives the structures: N2O: N≡N→O; NO: N=O; NO2: a single N atom (O=N→O); N2O3: O=N—N(=O)→O; N2O4: O2N—NO2; N2O5: O2N—O—NO2.

From these structures the oxides containing an N—N bond are N2O, N2O3 and N2O4 (in N2O5 the two N atoms are joined through O; NO and NO2 have a single N).

Teacher's Note: Draw each structure: only oxides whose two nitrogens are directly joined have an N–N bond.

Exam Note: N2O5 has N–O–N, not N–N.

Single Integer Answer Problems

Question I-1. Number of σ bonds in C(CN)4 are ......

Solution.

Answer (from key): Eight. Four C—C bonds plus four σ bonds of the C≡N groups give 4 + 4 = 8.

Teacher's Note: Count one sigma per single bond and one per triple bond.

Exam Note: Triple bond contains one σ and two π.

Question I-2. Number of equitorial bonds in PCl5 are ......

Solution.

Answer (from key): Three. PCl5 is trigonal bipyramidal (sp3d) with three equatorial and two axial P—Cl bonds.

Teacher's Note: Trigonal bipyramid: 3 equatorial, 2 axial positions.

Exam Note: Equatorial = in the trigonal plane.

Question I-3. The ratio of s-character in sp and sp3 hybridization is ......

Solution.

Answer (from key): Two. s-character is 50% in sp and 25% in sp3, so the ratio is 50/25 = 2.

Teacher's Note: s-character = 1/(number of hybrid orbitals).

Exam Note: Write 50% : 25%.

Question I-4. Number of lone pair of electrons in XeOF4 are ......

Solution.

Answer (from key): One. Xe (8 electrons) uses 6 in bonds (4 F and one O), leaving one lone pair; XeOF4 is sp3d2 square pyramidal.

Teacher's Note: Xe has 8 valence electrons; subtract those used in bonding.

Exam Note: One lone pair gives square pyramid.

Question I-5. Number of shell in which valence electrons of iodine lies ......

Solution.

Answer (from key): Five. Iodine (5s25p5) has its valence electrons in the fifth shell.

Teacher's Note: Valence shell number equals the period number.

Exam Note: Iodine is in period 5.

Question I-6. Number of electron pairs in SF6 at the corners of octahedron are ......

Solution.

Answer (from key): Six. SF6 has six bond pairs and no lone pair on S, all at the six corners of the octahedron.

Teacher's Note: Six bond pairs, no lone pair, in SF6.

Exam Note: Octahedron has six corners.

Question I-7. Number of electron pairs in XeF4 at the corners of square planar are ......

Solution.

Answer (from key): Four. The four Xe—F bond pairs lie at the corners of the square plane; the two lone pairs are axial.

Teacher's Note: Four bond pairs in the plane; lone pairs above and below.

Exam Note: Distinguish from the 6 total pairs.

Question I-8. Bond order of BN is ......

Solution.

Answer (from key): Two. BN has the same number of valence electrons (6) as C2, so its bond order is 2.

Teacher's Note: BN is isoelectronic with C2; both have bond order 2.

Exam Note: Isoelectronic species share bond order.

Question I-9. Maximum number of atoms which can be attached on N-atom is ......

Solution.

Answer (from key): Four. Nitrogen has no d-orbitals, so its maximum covalency is 4 (for example NH4+).

Teacher's Note: N has no d-orbitals, so covalency cannot exceed 4.

Exam Note: Contrast with phosphorus (five).

Question I-10. Assuming C6H6 ring is regular and C—I lies on the line through the centre of hexagon. If the distance between adjacent carbon is 1.40 Å and covalent radius of iodine and carbon atoms are 1.33 Å and 0.77 Å. The I—I distance in Å is ...... (the figure shows p-di-iodobenzene)

Solution.

Answer (from key): Seven. I—I distance = 2 × (1.40 + 0.77 + 1.33) = 7.0 Å (see Numerical Problem 34).

Teacher's Note: Para distance = 2 × (ring radius + r(C) + r(I)); ring radius equals C–C length.

Exam Note: Ring circumradius equals side length 1.40 Å.

Question I-11. The dipole moment of AB is 1.6 × 10-30 C·m. If intermolecular distance is 2.0 × 10-10 m, the % ionic character of AB is ......

Solution.

Answer (from key): Five. δ = μ/d = 1.6 × 10-30/2.0 × 10-10 = 8 × 10-21 C; % ionic = (8 × 10-21/1.602 × 10-19) × 100 = 4.99 ≈ 5.

Teacher's Note: Percent ionic = δ/e × 100 with δ = μ/d.

Exam Note: Use e = 1.602×10-19 C.

Question I-12. Bond order for CO is ......

Solution.

Answer (from key): Three. CO is isoelectronic with N2 (10 bonding, 4 antibonding): bond order = (10 − 4)/2 = 3 (C≡O).

Teacher's Note: CO has 14 electrons like N2; bond order 3.

Exam Note: Bonding minus antibonding, halved.

Question I-13. Ratio of bond pair-lone pair electrons in XeOF2 is ......

Solution.

Answer (from key): Two. Counting the two Xe—F bonds and the Xe=O double bond as four bond pairs against two lone pairs on Xe gives 4 : 2 = 2.

Teacher's Note: Treat the double bond as two bond pairs.

Exam Note: Show 4 bond pairs : 2 lone pairs.

Question I-14. Number of unpaired electrons in O2[AsF4] is ......

Solution.

Answer (from key): One. The cation is O2+, which has one electron in π*2p; hence one unpaired electron.

Teacher's Note: O2+ has one unpaired electron in π*.

Exam Note: Identify the ion first.

Question I-15. Bond order of NO+ is ......

Solution.

Answer (from key): Three. NO+ is isoelectronic with N2 (14 electrons): bond order 3.

Teacher's Note: NO+ has 14 electrons like N2.

Exam Note: Isoelectronic with CO and CN-.

Question I-16. Number of lone pairs of electrons on central iodine atom of I3- ion is ......

Solution.

Answer (from key): Three. I3- is sp3d with two bond pairs and three lone pairs on the central I (linear shape).

Teacher's Note: Central I: 5 pairs, 2 bonded, so 3 lone pairs.

Exam Note: Three lone pairs equatorial, linear shape.

Question I-17. AXn possess trigonal bipyramidal shape. If A has no lone pair, the value of n is ......

Solution.

Answer (from key): Five. Trigonal bipyramidal geometry with no lone pair needs five bond pairs, so n = 5 (for example PCl5).

Teacher's Note: Trigonal bipyramid with no lone pair means five bonded atoms.

Exam Note: n equals number of bonded atoms.

Question I-18. XeO4 shows maximum oxidation state (+8). If Xe reacts with fluorine atom, the maximum oxidation state shown by Xe is + ......

Solution.

Answer (from key): Six. Fluorine forms XeF2, XeF4 and XeF6; the maximum is XeF6 with Xe in +6.

Teacher's Note: No XeF8 exists; XeF6 is the highest fluoride.

Exam Note: Highest fluoride gives highest oxidation state.

Question I-19. Ratio of number of bond pair and lone pair in IF4- is ......

Solution.

Answer (from key): Two. IF4- (square planar, sp3d2) has four bond pairs and two lone pairs: 4/2 = 2.

Teacher's Note: Six pairs on I: four bonded, two lone.

Exam Note: Same pattern as XeF4.

Question I-20. Number of hybridised orbitals populated by bonding electron pairs in ICl2- are ......

Solution.

Answer (from key): Two. ICl2- is sp3d; of the five hybrid orbitals only two hold bond pairs (the other three hold lone pairs).

Teacher's Note: Count only orbitals containing bonding pairs.

Exam Note: Two bonds, so two populated orbitals.

Question I-21. Ratio of σ and π bonds in OSF4 is ......

Solution.

Answer (from key): Five. OSF4 has four S—F σ bonds and one S=O (one σ + one π): σ = 5, π = 1, ratio 5.

Teacher's Note: Double bond adds one σ and one π.

Exam Note: Ratio σ : π = 5 : 1.

Question I-22. Number of nearest neighbours of NH3 molecules round each molecule in solid NH3 are ......

Solution.

Answer (from key): Six. As stated in the solid ammonia problem, each NH3 molecule has six nearest neighbours (see Numerical Problem 33).

Teacher's Note: Taken from the given data of solid ammonia.

Exam Note: Link to the H-bond strength problem.

Question I-23. Based on VSEPR theory, number of 90 degree F—Br—F bonds in BrF5 is ...... (IIT 2010)

Solution.

Answer (from key): Zero. BrF5 is square pyramidal with a lone pair on Br; the lone pair pushes the four basal F atoms slightly away, so no F—Br—F angle is exactly 90° (all are about 85°).

Teacher's Note: Lone pair repulsion compresses angles below 90°, so none is exactly 90°.

Exam Note: Answer 0, not 8.

Question I-24. The ratio of shielding constant for Ne and Na+ is ......

Solution.

Answer (from key): One. Ne and Na+ are isoelectronic (1s22s22p6), so they have the same shielding constant (4.15); ratio = 1.

Teacher's Note: Isoelectronic species have equal σ.

Exam Note: Ratio of equal numbers is 1.

Question I-25. Bond order of CO is ......

Solution.

Answer (from key): Three. CO has the N2-type configuration with bond order (10 − 4)/2 = 3.

Teacher's Note: CO isoelectronic with N2.

Exam Note: Same as Question 12.

Question I-26. The ratio of bond order in O22+ and O2- is ......

Solution.

Answer (from key): Two. O22+ (14 electrons) has bond order 3; O2- (17 electrons) has bond order 1.5; ratio = 3/1.5 = 2.

Teacher's Note: Bond order = (bonding − antibonding)/2 for each ion.

Exam Note: Show 3 and 1.5 before the ratio.

Question I-27. The number of anti bonding electrons in N2- is ......

Solution.

Answer (from key): Five. N2- (15 electrons): σ*1s2, σ*2s2 and π*2p1 give 5 antibonding electrons.

Teacher's Note: Count electrons in σ*1s, σ*2s and π* orbitals.

Exam Note: Include the 1s antibonding pair.

Question I-28. The ratio of p-character and s-character in solid BeF2 is ......

Solution.

Answer (from key): Three. Solid BeF2 is polymeric with sp3 Be: p-character 75% : s-character 25% = 3.

Teacher's Note: sp3 has 3 parts p to 1 part s.

Exam Note: Solid BeF2 is sp3, not sp.

Question I-29. The number of σ-bonds in C(CN)4 is ......

Solution.

Answer (from key): Eight. Four C—C σ bonds and four C≡N σ bonds give 8.

Teacher's Note: One σ per bond between atoms, even in a triple bond.

Exam Note: Same as Question 1.

Question I-30. Number of lone pair of electrons on central atom of I3- is ......

Solution.

Answer (from key): Three. The central I of I3- carries three lone pairs (sp3d, linear).

Teacher's Note: Same structure as Question 16.

Exam Note: Three lone pairs, 2 bond pairs.

Question I-31. The ratio of σ and π-bonds in tetracyano methane is ......

Solution.

Answer (from key): One. C(CN)4 has 8 σ and 8 π bonds (four C≡N groups each with two π), so the ratio is 1.

Teacher's Note: Each C≡N has 1 σ and 2 π, plus the C—C σ bond.

Exam Note: 8σ : 8π = 1.

Question I-32. Number of 90° F—Xe—F bond angles in XeF4 is ......

Solution.

Answer (from key): Four. XeF4 is square planar; each F makes 90° with its two neighbours, giving four distinct 90° F—Xe—F angles.

Teacher's Note: Square planar: four adjacent pairs at 90°.

Exam Note: Count adjacent F pairs only.

Question I-33. Number of 90° F—I—F bond angles in IF5 is ......

Solution.

Answer (from key): Eight. IF5 is square pyramidal: four axial–basal and four adjacent basal–basal F—I—F angles are 90°, total 8.

Teacher's Note: Square pyramid: 4 apical–basal + 4 basal–basal.

Exam Note: Opposite basal pairs are 180°.

Question I-34. Number of covalent bonds in Al2Cl6 is ......

Solution.

Answer (from key): Six. Al2Cl6 has four terminal Al—Cl covalent bonds and two bridging covalent bonds (the other two bridge bonds are coordinate), giving six covalent bonds.

Teacher's Note: Each bridging Cl forms one covalent and one coordinate bond.

Exam Note: Separate covalent from coordinate bonds.

Question I-35. The number of three centre two electron bonds in a molecule of diborane is ......

Solution.

Answer (from key): Two. B2H6 has two banana (B—H—B) three-centre two-electron bonds.

Teacher's Note: Two bridging hydrogens give two 3c–2e bonds.

Exam Note: Four terminal B–H are normal bonds.

Question I-36. The ratio of σ-bond and π-bond in tetracyano methane is ......

Solution.

Answer (from key): One. Same as Question 31: 8σ and 8π, ratio 1.

Teacher's Note: Count σ and π in each C≡N.

Exam Note: Ratio equals 1.

Question I-37. Number of S—S bonds in cyclic trimer of SO3 is ......

Solution.

Answer (from key): Zero. The cyclic trimer S3O9 has S—O—S linkages in a ring and no S—S bonds.

Teacher's Note: Ring is built from S–O–S links, not S–S.

Exam Note: Answer 0.

Question I-38. Ratio of number of σ-bonds and S—O—S bonds in trimer of SO3 is ......

Solution.

Answer (from key): Four. S3O9 has 12 σ bonds and 3 S—O—S bridges, ratio 12/3 = 4.

Teacher's Note: Count 6 bridge S–O σ + 6 terminal S=O σ = 12.

Exam Note: Ratio of 12 : 3.

Question I-39. Number of π-bonds in trimer of SO3 is ......

Solution.

Answer (from key): Six. Each S carries two terminal S=O bonds, each with one π bond: 3 × 2 = 6 π bonds.

Teacher's Note: Two S=O per sulphur, three sulphurs.

Exam Note: Terminal oxygens carry the π bonds.

Question I-40. H2S5O6 a polythionic acid on decomposition gives sulphur molecules equal to ......

Solution.

Answer (from key): Three. H2S5O6 → H2SO4 + SO2 + 3S, so three sulphur atoms are deposited.

Teacher's Note: Balance S and O atoms in the decomposition equation.

Exam Note: Write the balanced equation.

Question I-41. The ratio of P—O and P=O bonds in P4O10 is ......

Solution.

Answer (from key): Three. P4O10 has 12 P—O single bonds and 4 P=O bonds: ratio 3.

Teacher's Note: Six bridging O give 12 P–O; four terminal give 4 P=O.

Exam Note: 12 : 4 = 3.

Question I-42. Number of S—S bonds in H2S5O6 is ......

Solution.

Answer (from key): Four. In H2S5O6 (HO3S—S—S—S—SO3H) the five sulphur atoms are joined in a chain with four S—S bonds.

Teacher's Note: Polythionic acid has an unbranched S chain.

Exam Note: Chain of 5 atoms has 4 bonds.

Question I-43. Number of identical Cr—O bonds in Cr2O72- ion is ......

Solution.

Answer (from key): Six. Dichromate has six terminal Cr—O bonds that are identical (three on each Cr); the two bridging Cr—O bonds differ.

Teacher's Note: Terminal and bridging bonds differ.

Exam Note: Six terminal, two bridging.

Question I-44. The ratio of σ and π-bonds in benzene is ......

Solution.

Answer (from key): Four. Benzene has 12 σ bonds (6 C—C and 6 C—H) and 3 π bonds: 12/3 = 4.

Teacher's Note: Count 6 C–C σ + 6 C–H σ against 3 π bonds.

Exam Note: Ratio 12 : 3.

Objective Problems (One Answer Correct)

Question O-1. Shielding constant σ for Ne is 4.15. The effective nuclear charge on Na+ and F- are respectively:
(a) 4.85, 6.85 (b) 5.85, 6.85 (c) 6.85, 4.85 (d) 4.85, 4.85

Solution.

Answer (from key): (c) 6.85, 4.85. All three (Ne, Na+, F-) are 1s22s22p6 with the same shielding constant, so Zeff = Z − σ: Na+ = 11 − 4.15 = 6.85; F- = 9 − 4.15 = 4.85.

Teacher's Note: Isoelectronic ions: same σ, Z* = Z − σ.

Exam Note: Order asked is Na+ then F-.

Question O-2. Electron gain enthalpy and ionisation energy of an atom are −a and +b eV respectively. The electronegativity of that atom on Mulliken scale is given by:
(a) a − b (b) (b − a)/2 (c) a + b (d) (a + b)/2

Solution.

Answer (from key): (d) (a + b)/2. Mulliken electronegativity = (IE + EA)/2, where EA is the electron affinity = −(electron gain enthalpy) = a, so X = (a + b)/2.

Teacher's Note: Electron affinity is the negative of electron gain enthalpy.

Exam Note: Mulliken: average of IE and EA.

Question O-3. The atomic radii of Li is 1.23 Å and ionic radius of Li+ is 0.76 Å. The fraction of the volume occupied by 2s electron in Li is:
(a) 0.764 (b) 0.184 (c) 0.595 (d) 0.236

Solution.

Answer (from key): (a) 0.764. VLi = (4/3) × 3.14 × (1.23)3 = 7.79 Å3; VLi+ = (4/3) × 3.14 × (0.76)3 = 1.84 Å3. Volume occupied by 2s-electron = 7.79 − 1.84 = 5.95 Å3; fraction = 5.95/7.79 = 0.764.

Teacher's Note: Valence-electron volume = V(Li) − V(Li+).

Exam Note: Report as a fraction.

Question O-4. Photons of monochromatic light having just sufficient energy to ionise Ar-atom are incident over the mixture of inert gases He, Ne, Ar, Kr and Xe. The mixture will contain:
(a) He, Ne, gases; Ar+, Kr+, Xe+ ions (b) He+, Ne+ ions; Ar, Kr, Xe gases (c) He+, Ne+, Ar+, Kr+ and Xe+ ions (d) He+, Ne+, Ar+ ions and Kr, Xe gases

Solution.

Answer (from key): (a). IE1 decreases down the group, so photons just able to ionise Ar will also ionise Kr and Xe, but not He or Ne.

Teacher's Note: Ionisation energy falls down a group.

Exam Note: Heavier gases ionise more easily.

Question O-5. If EA1 and EA2 for oxygen atom are −142 kJ mol-1 and +844 kJ mol-1. The energy released to form 2O + 2e → 2O- will be: (in kJ mol-1)
(a) 986 (b) 702 (c) 284 (d) 1688

Solution.

Answer (from key): (c) 284. O + e → O-, ΔH = −142 kJ; for 2O + 2e → 2O-, ΔH = 2 × (−142) = −284 kJ, so 284 kJ is released (EA2 is not involved).

Teacher's Note: Only the first electron gain is involved in forming O-.

Exam Note: Do not add EA2.

Question O-6. Dipole moment of K+Cl- is 3.336 × 10-29 cm and it is 80% ionic in nature. The inter ionic distance between K+ and Cl- is:
(a) 1.30 Å (b) 2.60 Å (c) 3.9 Å (d) 1.20 Å

Solution.

Answer (from key): (b) 2.60 Å. μ = δ × d with δ = 1.602 × 10-19 × 80/100: d = 3.336 × 10-29 × 100/(1.602 × 10-19 × 80) = 2.60 × 10-10 m = 2.60 Å.

Teacher's Note: Charge on each ion is 80% of e.

Exam Note: Convert metres to Å.

Question O-7. Bond order for CO+ and NO+ are respectively:
(a) 3.5, 3.0 (b) 2.5, 3.0 (c) 2.5, 2.5 (d) 3.0, 2.5

Solution.

Answer (from key): (b) 2.5, 3.0. Corrected: the book keys (a) 3.5, 3.0. CO+ has 13 electrons (bonding 9, antibonding 4): bond order = (9 − 4)/2 = 2.5, while NO+ has 14 electrons: bond order = (10 − 4)/2 = 3.0.

Teacher's Note: Count electrons: CO+ has 13, NO+ has 14.

Exam Note: Removing a bonding electron lowers bond order.

Question O-8. Bond order for N2+ and N2- are same. Which relation is correct for N2+ and N2-?
(a) Bond energy of N2+ = Bond energy of N2- (b) Bond energy of N2+ > Bond energy of N2- (c) Bond energy of N2+ < Bond energy of N2- (d) Bond energy of N2+ ≷ Bond energy of N2-

Solution.

Answer (from key): (b). Both have bond order 2.5, but N2+ has one bonding electron less (and no extra antibonding electron), whereas N2- has one more antibonding electron, so N2+ is more stable.

Teacher's Note: Equal bond order does not mean equal stability; extra antibonding electrons destabilise.

Exam Note: Compare antibonding electron counts.

Question O-9. The electron gain enthalpy of fluorine atom is 333 kJ mol-1 and dissociation energy of F2 is 158.8 kJ mol-1. Energy released during formation of F- from 2 g F2 (atomic mass 40) is:
(a) 33.3 kJ (b) 7.94 kJ (c) 25.36 kJ (d) 41.24 kJ

Solution.

Answer (from key): (c) 25.36 kJ. F2 → 2F, ΔH = +158.8 kJ/mol; F + e → F-, Eeg = −333 kJ/mol. 2 g F2 = 2/40 mol F2 = 1/10 g-atom of F. Energy released on electron gain = 333/10 = 33.3 kJ; dissociation absorbs (2/40) × 158.8 = 7.94 kJ. ΔH for 2 g (F2 → 2F-) = −33.3 + 7.94 = −25.36 kJ.

Teacher's Note: Subtract the bond-dissociation energy absorbed from the electron-gain energy released.

Exam Note: Use moles of F2 and F separately.

Question O-10. The ionisation energy of lithium is 5.40 eV. If ionisation energy of H-atom is 13.6 eV, the effective charge acting upon outermost shell of Li is:
(a) 1.26 (b) 2.52 (c) 0.63 (d) 3.0

Solution.

Answer (from key): (a) 1.26. Li: 1s22s1, n = 2; Z = n √(ELi/EH) = 2 × √(5.40/13.6) = 1.26.

Teacher's Note: E ∝ Zeff2/n2, with n = 2.

Exam Note: Same as Numerical Problem 16.

Question O-11. Which of the molecule is hypovalent but has complete octet?
(a) AlCl3 (b) PH3 (c) PCl3 (d) SF4

Solution.

Answer (from key): (a) AlCl3. AlCl3 is hypovalent (six electrons on Al) but it completes its octet by coordinate bond forming Al2Cl6.

Teacher's Note: Electron-deficient AlCl3 dimerises by chlorine bridges.

Exam Note: Hypovalent means fewer than eight electrons.

Question O-12. Which of the molecule does not possess hypervalent nature?
(a) IF7 (b) SF4 (c) BF3 (d) SF6

Solution.

Answer (from key): (c) BF3. Except BF3, all have expanded octet (more than eight electrons on the central atom); BF3 has only six.

Teacher's Note: Hypervalent = more than 8 electrons on the central atom.

Exam Note: Boron compounds are electron deficient.

Question O-13. The species not having same bond order is:
(a) N2+ (b) O2+ (c) NO (d) NO+

Solution.

Answer (from key): (d) NO+. Bond order for N2+, O2+ and NO is 2.5. For NO+ it is 3.

Teacher's Note: Compute from electron count for each species.

Exam Note: NO+ is the 14-electron one.

Question O-14. Least basic trihalide is:
(a) NF3 (b) NCl3 (c) NBr3 (d) NI3

Solution.

Answer (from key): (a) NF3. Due to more positive charge on N on account of more electronegativity of F, the lone pair on N is least available.

Teacher's Note: Electronegative F pulls electron density off N.

Exam Note: Basicity decreases as substituent electronegativity increases.

Question O-15. Least acidic trihalide is:
(a) BF3 (b) BCl3 (c) BBr3 (d) BI3

Solution.

Answer (from key): (a) BF3. Due to back bonding (pπ–pπ) from F lone pairs into the empty p-orbital of B, which is most effective for F.

Teacher's Note: Back bonding is strongest with small 2p halogen F.

Exam Note: Lewis acidity order: BI3 > BBr3 > BCl3 > BF3.

Question O-16. During the reaction C2H4 + 3O2 → 2CO2 + 2H2O; the hybridised state of carbon changes from:
(a) sp2 to sp (b) sp to sp2 (c) sp3 to sp (d) sp to sp3

Solution.

Answer (from key): (a) sp2 to sp. C2H4 has sp2-hybridised carbon and CO2 has sp-hybridisation.

Teacher's Note: Ethene carbons are sp2; CO2 carbon is sp.

Exam Note: Give initial and final states.

Question O-17. Which of the following is T-shaped?
(a) XeOF2 (b) XeO3 (c) XeOF4 (d) XeF4

Solution.

Answer (from key): (a) XeOF2. XeOF2 has sp3d-hybridisation with two lone pairs of electrons leading to trigonal pyramid (basic geometry trigonal bipyramid) shape in T-shaped molecule.

Teacher's Note: Three bond pairs and two lone pairs make T-shape.

Exam Note: Compare with ClF3.

Question O-18. Number of sigma bonds and double bonds in P4O10 are respectively:
(a) 12, 4 (b) 6, 4 (c) 8, 2 (d) 10, 4

Solution.

Answer (from key): (a) 12, 4 as printed (see note). Book key: (a). Note: P4O10 has 12 P—O single (σ) bonds in the P—O—P bridges and 4 terminal P=O double bonds; counting the σ part of the four P=O bonds as well gives 16 σ bonds in all. The listed option (a) 12, 4 counts the 12 single bonds and the 4 double bonds.

Teacher's Note: Count P–O–P bridges (12 σ) and terminal P=O (4 double).

Exam Note: Option (a) matches the single and double bond counts.

Question O-19. Which of the following is not correct for P4O10 and P4O6?
(a) Both are acidic anhydride (b) Both have sp2-hybridised P-atoms (c) Both have P—O—P bonds (d) Both have six P—O—P bonds

Solution.

Answer (from key): (b). Phosphorus is sp3-hybridised in both P4O6 and P4O10, so the statement of sp2 hybridisation is wrong.

Teacher's Note: Each P has four sigma bonds or three bonds plus a lone pair: sp3.

Exam Note: Spot the incorrect statement.

Question O-20. A planar molecule has ABx structure with six pairs of electrons around A and one lone pair. The value of X is:
(a) 2 (b) 4 (c) 6 (d) 7

Solution.

Answer (from key): (c) 6. A: sp3d3 with six B atoms attached on A (six bond pairs and one lone pair), so x = 6.

Teacher's Note: Six bond pairs plus one lone pair on A.

Exam Note: Value of x equals the number of bond pairs.

Question O-21. Among the following species, identify the isostructural pairs: NF3, NO3-, BF3, H3O+, HN3
(a) [NF3, NO3-] and [BF3, H3O+] (b) [NF3, HN3] and [NO3-, BF3] (c) [NF3, H3O+] and [NO3-, BF3] (d) [NF3, H3O+] and [HN3, BF3]

Solution.

Answer (from key): (c). NF3 and H3O+ are both sp3 pyramidal; NO3- and BF3 are both sp2 trigonal planar.

Teacher's Note: Match pyramidal sp3 with pyramidal and planar sp2 with planar.

Exam Note: Isostructural means same shape.

Question O-22. The two carbon atoms in calcium carbide are held by which of the following bonds:
(a) three sigma bonds (b) ionic bonds (c) two pi and one sigma bonds (d) ionic and covalent bonds

Solution.

Answer (from key): (c). Calcium carbide contains the C≡C2- ion, whose carbons are joined by one σ and two π bonds.

Teacher's Note: Carbide ion C22- has a triple bond.

Exam Note: One sigma plus two pi equals triple bond.

Question O-23. Arrange the following compounds in order of increasing dipole moment: Toluene (I); m-dichlorobenzene (II); o-dichlorobenzene (III); p-dichlorobenzene (IV)
(a) I < IV < II < III (b) IV < I < II < III (c) IV < I < III < II (d) IV < II < I < III

Solution.

Answer (from key): (b) IV < I < II < III. p-Dichlorobenzene is non-polar (μ = 0); the o-isomer has the maximum dipole moment (bond moments at 60°), then the m-isomer (120°), and toluene has a small dipole moment.

Teacher's Note: Bond moments: 180° gives 0, 120° gives medium, 60° gives largest.

Exam Note: Smaller angle means larger resultant.

Question O-24. Among KO2, AlO2-, BaO2 and NO2+, unpaired electron is present in:
(a) NO2+ and BaO2 (b) KO2 and AlO2- (c) KO2 only (d) BaO2 only

Solution.

Answer (from key): (c) KO2 only. KO2 has the K+O2- structure, with one unpaired electron in the superoxide ion; BaO2 (peroxide), AlO2- and NO2+ have all electrons paired.

Teacher's Note: Superoxide O2- is paramagnetic; peroxide is not.

Exam Note: Identify the oxide ion type.

Question O-25. Which contains both polar and non-polar bonds?
(a) NH4Cl (b) HCN (c) H2O2 (d) CH4

Solution.

Answer (from key): (c) H2O2. H2O2 (H—O—O—H, non-planar) has polar O—H bonds and a non-polar O—O bond.

Teacher's Note: Look for a bond between identical atoms plus a bond between different atoms.

Exam Note: NH4Cl also has ionic bond but no non-polar one.

Question O-26. Which has sp2-hybridization:
(a) CO2 (b) SO2 (c) N2O (d) CO

Solution.

Answer (from key): (b) SO2. S in SO2 has two σ bonds and one lone pair, so sp2; CO2, N2O and CO are sp.

Teacher's Note: Steric number 3 gives sp2.

Exam Note: Include the lone pair in the count.

Question O-27. The critical temperature of water is higher than that of O2 because the H2O molecule has:
(a) fewer electrons than O2 (b) two covalent bonds (c) V-shape (d) dipole moment

Solution.

Answer (from key): (d) dipole moment. More is dipole moment, more is attraction among molecules, so more will be TC.

Teacher's Note: Polar molecules attract more strongly, raising Tc.

Exam Note: Link critical temperature to intermolecular attraction.

Question O-28. The geometry and the type of hybrid orbitals present about the central atom in BF3 is:
(a) linear, sp (b) trigonal planar, sp2 (c) tetrahedral sp3 (d) pyramidal, sp3

Solution.

Answer (from key): (b) trigonal planar, sp2. B in BF3 has three bond pairs and no lone pair, so sp2 and trigonal planar.

Teacher's Note: Three sigma bonds, no lone pair.

Exam Note: Give both geometry and hybridisation.

Question O-29. The geometry of H2S and its dipole moment are:
(a) angular and non-zero (b) angular and zero (c) linear and non-zero (d) linear and zero

Solution.

Answer (from key): (a) angular and non-zero. S in H2S shows sp3-hybridisation with angular V-shape due to the presence of two lone pairs on S-atom; μ ≠ 0.

Teacher's Note: Two lone pairs bend the molecule so dipoles do not cancel.

Exam Note: Bent shape implies non-zero dipole.

Question O-30. In compounds of type ECl3, where E = B, P, As and Bi the angles Cl—E—Cl for different E are in the order:
(a) B > P = As = Bi (b) B > P > As > Bi (c) B < P = As = Bi (d) B < P < As > Bi

Solution.

Answer (from key): (b) B > P > As > Bi. BCl3 is sp2-hybridised (120°); the rest are sp3-hybridised with angle decreasing from P to Bi.

Teacher's Note: Planar BCl3 has the largest angle; lone-pair compounds are smaller.

Exam Note: Angle falls as central atom gets larger.

Question O-31. In the compound CH2=CH—CH2—CH2—C≡CH, the C2—C3 bond is of the type:
(a) sp–sp2 (b) sp3–sp3 (c) sp–sp3 (d) sp2–sp3

Solution.

Answer (from key): (d) sp2–sp3. Number the carbons 1 to 6: C1 sp2, C2 sp2, C3 sp3, C4 sp3, C5 sp, C6 sp; so C2—C3 is sp2–sp3.

Teacher's Note: Number carbons from the alkene end and assign each.

Exam Note: C=C carbon is sp2; CH2 is sp3.

Question O-32. Which of the following shows biggest jump in II and III ionisation energy:
(a) 1s2, 2s22p6, 3s2 (b) 1s2, 2s22p6, 3s23p2 (c) 1s2, 2s22p6, 3s23p6, 4s24p2 (d) 1s2, 2s2

Solution.

Answer (from key): (d) 1s2, 2s2. In Be (1s22s2) the biggest jump will be in IE2 to IE3, as the third electron must be removed from the 1s orbital which is closest to the nucleus.

Teacher's Note: Big jump occurs when removal starts from an inner shell.

Exam Note: Be has two valence electrons.

Question O-33. Which of the following possesses highest second ionisation energy?
(a) 1s2, 2s22p6, 3s2 (b) 1s2, 2s22p6, 3s1 (c) 1s2, 2s22p3 (d) 1s2, 2s22p4

Solution.

Answer (from key): (b) 1s2, 2s22p6, 3s1. After removal of I electron (from Na), the next electron will be removed from the noble-gas 2p6 core, so IE2 is highest for Na.

Teacher's Note: Second ionisation of an alkali metal breaks a noble gas core.

Exam Note: Alkali metals have huge IE2.

Question O-34. EA1 of element is:
(a) always exothermic (b) always endothermic (c) may be exothermic or endothermic (d) always zero

Solution.

Answer (from key): (c) may be exothermic or endothermic. First EA are exothermic; however, for alkaline earth metals these are endothermic.

Teacher's Note: Most first EA are exothermic, with exceptions such as Be, Mg, noble gases.

Exam Note: Name an exception.

Question O-35. Element having highest I.E. but zero electron gain enthalpy:
(a) H (b) F (c) He (d) B

Solution.

Answer (from key): (c) He. He has completely filled 1s orbital, giving the highest IE and zero electron gain enthalpy.

Teacher's Note: Noble gas with the smallest, most tightly held shell.

Exam Note: Closed shell resists adding electrons.

Question O-36. The second electron gain enthalpy of O and S (in kJ mol-1) respectively are:
(a) −844, +590 (b) +590, +844 (c) +844, +590 (d) −590, +844

Solution.

Answer (from key): (c) +844, +590. In O- and S-, EA2 will be positive because addition of electron is opposed by the anionic sphere in each; the repulsion will be more predominant in O-.

Teacher's Note: Smaller O- repels the incoming electron more.

Exam Note: Both second EAs are endothermic.

Question O-37. Which factor is responsible to make Li as a powerful reducing agent?
(a) Electronegativity (b) Ionisation energy (c) Electron gain enthalpy (d) Hydration energy

Solution.

Answer (from key): (d) Hydration energy. Li(g) → Li+(g) + e requires large IE, but Li+ + aq → Li+(aq) releases much more energy (small size), making ΔH negative overall and E° most negative.

Teacher's Note: Small Li+ has the highest hydration enthalpy.

Exam Note: Reducing power in water depends on hydration.

Question O-38. The first electron gain enthalpy of which pair is not correctly represented?
(a) O > S (b) Cl > F (c) N > P (d) B > C

Solution.

Answer (from key): (a) O > S. Book key: EA1 of S > EA1 of O (sulphur gains an electron more exothermically because of the small, crowded 2p subshell of O), so “O > S” is the pair that is not correctly represented; EA1 of Cl > F, of N > P and of B > C are taken as correct in the key.

Teacher's Note: Second-period elements O and F have anomalously low EA.

Exam Note: Compare O with S, not O with N.

Question O-39. Which of the following factors does not influence the covalent character in molecule:
(a) size of cation (b) size of anion (c) pseudo inert gas configuration of cation (d) bond energy

Solution.

Answer (from key): (d) bond energy. Fajans: the rest all influence polarisation of the anion; bond energy does not.

Teacher's Note: Covalent character follows polarising power and polarisability.

Exam Note: Fajans’ rules list cation size, charge and configuration.

Question O-40. If the formation of O2- from O- atom is shown below: O(g) + e → O-(g); ΔH = −142 kJ mol-1; O-(g) + e → O2-(g); ΔH = +844 kJ mol-1; then which of the following statements are correct:
(a) O(g) → O2-(g); ΔH = 702 kJ mol-1 (b) O- ion opposes further addition of electron (c) EA2 of O > EA1 of O (d) All of these

Solution.

Answer (from key): (d) All of these. Addition of an electron to an anion is opposed by ionic sphere; overall ΔH = −142 + 844 = +702 kJ/mol; EA2 (+844) exceeds EA1 (−142) in value.

Teacher's Note: Add both steps for overall change.

Exam Note: Overall ΔH = +702 kJ.

Question O-41. The correct order of II ionisation energy shown in correct order is:
(a) F > O > N > C (b) C > N > O > F (c) O > N > F > C (d) O > F > N > C

Solution.

Answer (from key): (d) O > F > N > C. After the removal of one electron in oxygen, it acquires half filled configuration, i.e., O+ 1s2, 2s22p3, so IE2 of O is the highest.

Teacher's Note: O+ has a stable half-filled 2p3, hence large IE2.

Exam Note: Check IE2 by the configuration of the cation.

Question O-42. The correct order of increasing electron affinity of the following is:
(a) O < S < F < Cl (b) O < S < Cl < F (c) S < O < Cl < F (d) S < O < F < Cl

Solution.

Answer (from key): (a) O < S < F < Cl. Electron affinity increases O (141) < S (200) < F (328) < Cl (349 kJ/mol); the 2p elements O and F are lower than the 3p elements of their groups.

Teacher's Note: Second-period O and F have unusually low EA than S and Cl.

Exam Note: Remember Cl > F and S > O.

Question O-43. Shielding constant of Ne is 4.15, the shielding constant of Na+ would be:
(a) 4.15 (b) 3.70 (c) 5.20 (d) 6.20

Solution.

Answer (from key): (a) 4.15. Ne: 1s22s22p6; Na+: 1s22s22p6; the shielding effect will be the same.

Teacher's Note: Isoelectronic species have the same shielding constant.

Exam Note: Same electron count means same σ.

Question O-44. First ionisation energy of Li and K are 5.4 and 4.3 eV respectively, approximate ionisation energy of Na will be:
(a) 8.7 eV (b) 1.1 eV (c) 4.9 eV (d) 2.2 eV

Solution.

Answer (from key): (c) 4.9 eV. Law of triad: IE of Na = (IE of K + IE of Li)/2 = (4.3 + 5.4)/2 = 4.85 ≈ 4.9 eV.

Teacher's Note: Dobereiner triad: middle element is the mean of its neighbours.

Exam Note: Average the two given values.

Question O-45. Which of the following has the highest electron releasing tendency?
(a) F- (b) OH- (c) NH2- (d) CH3-

Solution.

Answer (from key): (d) CH3-. The basic nature is CH3- > NH2- > OH- > F-, following decreasing electronegativity of the atom bearing the charge.

Teacher's Note: Least electronegative atom holds electrons loosely.

Exam Note: Compare electronegativity C < N < O < F.

Question O-46. The compound which contains both ionic and covalent bonds is:
(a) CH4 (b) H2 (c) KCN (d) KCl

Solution.

Answer (from key): (c) KCN. KCN has K+ and [C≡N]-: ionic between K+ and CN-, and covalent within CN-.

Teacher's Note: A polyatomic ion gives covalent bonds inside and ionic outside.

Exam Note: Look for a complex anion or cation.

Question O-47. The octet rule is not valid for the molecule:
(a) CO2 (b) H2O (c) O2 (d) CO

Solution.

Answer (from key): (b) H2O. In H—O—H, H has a duplet of electrons, not an octet.

Teacher's Note: Hydrogen follows the duplet rule.

Exam Note: Octet rule needs eight on each atom.

Question O-48. Element X is strongly electropositive and element Y is strongly electronegative. Both are univalent. The compound formed would be:
(a) X+Y- (b) X-Y+ (c) X—Y (d) X → Y

Solution.

Answer (from key): (a) X+Y-. X loses an electron and Y gains it, giving the ionic compound X+Y-.

Teacher's Note: Large electronegativity difference gives an ionic bond.

Exam Note: Electropositive atom becomes the cation.

Question O-49. Which of the following compounds are covalent?
(a) H2 (b) CaO (c) KCl (d) Na2S

Solution.

Answer (from key): (a) H2. H2 has identical atoms sharing electrons, so it is covalent; the others are metal–non-metal ionic compounds.

Teacher's Note: Same atoms share electrons equally.

Exam Note: Metal plus non-metal usually ionic.

Question O-50. The total number of electrons that take part in forming the bond in N2 is:
(a) 2 (b) 4 (c) 6 (d) 10

Solution.

Answer (from key): (c) 6. :N≡N: has three shared pairs (one σ and two π), i.e. 6 bonding electrons.

Teacher's Note: Triple bond means three shared pairs.

Exam Note: N2 has 10 valence electrons, 6 bonding.

Question O-51. Which of the following is soluble in water?
(a) CS2 (b) C2H5OH (c) CCl4 (d) CHCl3

Solution.

Answer (from key): (b) C2H5OH. Ethanol dissolves in water due to hydrogen bonding with water.

Teacher's Note: Like dissolves like; H-bonding favours solubility.

Exam Note: Others are non-polar or weakly polar.

Question O-52. If a molecule MX2, has zero dipole moment, the sigma bonding orbitals used by M (atomic number < 21) are:
(a) pure p (b) sp hybrid (c) sp2 hybrid (d) sp3 hybrid

Solution.

Answer (from key): (b) sp hybrid. Zero dipole moment of MX2 means a linear molecule (for example BeX2), so M uses sp hybrid orbitals.

Teacher's Note: Linear symmetrical MX2 implies sp hybridisation.

Exam Note: Zero dipole needs a 180° bond angle.

Question O-53. The ion that is isoelectronic with CO is:
(a) CN- (b) O2+ (c) O2- (d) N2+

Solution.

Answer (from key): (a) CN-. CN- and CO both have 14 electrons.

Teacher's Note: Count electrons: CO has 6 + 8 = 14.

Exam Note: Isoelectronic means equal electron count.

Question O-54. Among the following, the molecule that is linear is:
(a) CO2 (b) NO2 (c) SO2 (d) ClO2

Solution.

Answer (from key): (a) CO2. sp-hybridisation of carbon gives the linear O=C=O; the others are bent.

Teacher's Note: Only sp central atom with no lone pair is linear.

Exam Note: Linear needs steric number 2.

Question O-55. Carbon tetrachloride has no net dipole moment because of:
(a) its planar structure (b) its regular tetrahedral structure (c) similar sizes of carbon and chlorine (d) similar electron affinities of carbon and chlorine

Solution.

Answer (from key): (b) its regular tetrahedral structure. Net μ = 0 due to regular tetrahedron geometry: the four C—Cl bond moments cancel.

Teacher's Note: Symmetric geometry cancels polar bond moments.

Exam Note: Polar bonds, non-polar molecule.

Question O-56. Which one among the following does not have the hydrogen bond?
(a) phenol (b) liquid NH3 (c) water (d) liquid HCl

Solution.

Answer (from key): (d) liquid HCl. H-bonding is observed if H is attached to N, O or F atoms; Cl is not small enough.

Teacher's Note: H-bonding needs H bonded to N, O or F.

Exam Note: Cl is large and less electronegative.

Question O-57. The types of bonds present in CuSO4·5H2O are only:
(a) electrovalent and covalent (b) electrovalent and coordinate covalent (c) electrovalent, covalent and coordinate covalent (d) covalent and coordinate covalent

Solution.

Answer (from key): (c). [Cu(H2O)4]2+·SO42-·H2O has ionic bonds (complex cation and sulphate), covalent bonds (in water and sulphate) and coordinate bonds (Cu←OH2).

Teacher's Note: Hydrate: ionic + covalent + coordinate (plus H-bonds).

Exam Note: List each bond type present.

Question O-58. On hybridization of one s and one p orbitals we get:
(a) two mutually perpendicular orbitals (b) two orbitals at 180° (c) four orbitals directed tetrahedrally (d) three orbitals in a plane

Solution.

Answer (from key): (b) two orbitals at 180°. sp-hybridisation gives two orbitals at a 180° angle.

Teacher's Note: sp: linear, 180°.

Exam Note: Match number of orbitals to angle.

Question O-59. The molecule having one unpaired electron is:
(a) NO (b) CO (c) CN- (d) O2

Solution.

Answer (from key): (a) NO. NO has 15 electrons, so one unpaired electron in π*; CO and CN- have 14 and O2 has two unpaired.

Teacher's Note: Odd electron count means an unpaired electron.

Exam Note: NO is an odd-electron molecule.

Question O-60. The hydration energy of Mg2+ is greater than that of:
(a) Al3+ (b) Na+ (c) Be2+ (d) Mg2-

Solution.

Answer (from key): (b) Na+. Mg2+ is smaller than Na+ and has more charge, hence higher hydration energy.

Teacher's Note: Hydration energy rises with charge density.

Exam Note: Compare ionic charge/size.

Question O-61. The bonds present in N2O5 are:
(a) only ionic (b) covalent and coordinate (c) only covalent (d) covalent and ionic

Solution.

Answer (from key): (b) covalent and coordinate. N2O5 (O2N—O—NO2) has covalent N=O and N—O bonds and coordinate N→O bonds.

Teacher's Note: Nitrogen oxides contain coordinate N→O bonds.

Exam Note: No ions are present.

Question O-62. The bond between two identical non-metal atoms has a pair of electrons:
(a) unequally shared between the two (b) transferred fully from one atom to another (c) with identical spins (d) equally shared between them

Solution.

Answer (from key): (d) equally shared between them. Non-polar bond, e.g., H—H, shares the pair equally.

Teacher's Note: Identical atoms have equal pull.

Exam Note: Pure covalent bond is non-polar.

Question O-63. The hydrogen bond is strongest in:
(a) O—H······S (b) S—H······O (c) F—H······F (d) F—H······O

Solution.

Answer (from key): (c) F—H······F. F—H······F > O—H······O > N—H······N; fluorine is the most electronegative and smallest.

Teacher's Note: H-bond strength follows electronegativity and size of the acceptor.

Exam Note: F–H···F is the strongest known.

Question O-64. The hybridisation of sulphur in sulphur dioxide is:
(a) sp (b) sp3 (c) sp2 (d) dsp2

Solution.

Answer (from key): (c) sp2. O=S=O with a lone pair on S: two σ bonds + one lone pair = three, so sp2.

Teacher's Note: Steric number 3 gives sp2.

Exam Note: Count the lone pair.

Question O-65. Hydrogen bonding is maximum in:
(a) Ethanol (b) Diethylether (c) Ethyl chloride (d) Triethylamine

Solution.

Answer (from key): (a) Ethanol. Diethyl ether, ethyl chloride and triethylamine do not have H attached to O, Cl or N, so do not show H-bonding; ethanol does.

Teacher's Note: Needs H bonded to O, N or F in the molecule itself.

Exam Note: Alcohol O–H gives hydrogen bonding.

Question O-66. The first ionisation potential (in electron volt) of nitrogen and oxygen atoms are respectively:
(a) 14.6, 13.6 (b) 13.6, 14.6 (c) 13.6, 13.6 (d) 14.6, 14.6

Solution.

Answer (from key): (a) 14.6, 13.6. IE1 of N > IE1 of O due to half filled nature of orbitals in N.

Teacher's Note: Half-filled 2p3 of N is extra stable.

Exam Note: Exception to the periodic trend.

Question O-67. Atomic radii of fluorine and neon (in Å) are respectively:
(a) 0.72, 1.60 (b) 1.60, 1.60 (c) 0.72, 0.72 (d) 1.60, 0.72

Solution.

Answer (from key): (a) 0.72, 1.60. F has covalent radius whereas Ne has van der Waals’ radius; covalent radius is smaller.

Teacher's Note: Noble gas radii are van der Waals values and larger.

Exam Note: Compare radius types.

Question O-68. The correct increasing order of electronegativity is:
(a) C < N < Si < P (b) N < Si < C < P (c) Si < P < C < N (d) P < Si < N < C

Solution.

Answer (from key): (c) Si < P < C < N. Electronegativity increases along the period, decreases down the group: Si (1.8) < P (2.1) < C (2.5) < N (3.0).

Teacher's Note: Compare period then group trends.

Exam Note: Use Pauling values.

Question O-69. Which of the following has zero dipole moment?
(a) 1,1-dichloro ethane (b) cis-1,2-dichloro ethene (c) trans-1,2-dichloro ethene (d) none of the above

Solution.

Answer (from key): (c) trans-1,2-dichloro ethene. In the trans isomer the two C—Cl bond moments are equal and opposite and cancel (μ = 0).

Teacher's Note: Symmetry cancels vectors in the trans isomer.

Exam Note: Cis is polar; trans is non-polar.

Question O-70. The bond between carbon atom (1) and carbon atom (2) in N≡C(1)—CH(2)=CH2 involves hybridisation:
(a) sp2, sp2 (b) sp3, sp (c) sp, sp2 (d) sp, sp

Solution.

Answer (from key): (c) sp, sp2. Carbon 1 (in C≡N) is sp; carbon 2 (in CH=CH2) is sp2.

Teacher's Note: Triple-bond C is sp, double-bond C is sp2.

Exam Note: Label the carbons from the nitrile end.

Question O-71. The correct order for IE1 is:
(a) Na < Mg > Al < Si (b) Na > Mg > Al > Si (c) Na < Mg < Al > Si (d) Na > Mg > Al < Si

Solution.

Answer (from key): (a) Na < Mg > Al < Si. IE1 of Al < IE1 of Mg because the 3p electron of Al is easier to remove than a 3s electron of Mg; overall Na < Al < Mg < Si.

Teacher's Note: Filled s-subshell of Mg makes IE1(Mg) > IE1(Al).

Exam Note: Anomalies at groups 2 and 13.

Question O-72. The species in which the central atom uses sp2 hybrid orbitals in its bonding is:
(a) PH3 (b) NH3 (c) CH3+ (d) SbH3

Solution.

Answer (from key): (c) CH3+. CH3+ has three σ bonds and no lone pair, so sp2; PH3, NH3, SbH3 are sp3.

Teacher's Note: Carbocation: three bond pairs, no lone pair.

Exam Note: Compare with sp3 hydrides.

Question O-73. The molecule that has linear structure is:
(a) CO2 (b) NO2 (c) SO2 (d) SiO2

Solution.

Answer (from key): (a) CO2. Due to sp-hybridisation, CO2 is linear (SiO2 is a giant tetrahedral network).

Teacher's Note: Only CO2 is a linear sp molecule.

Exam Note: SiO2 is not molecular.

Question O-74. The molecule which has zero dipole moment is:
(a) CH2Cl2 (b) BF3 (c) NF3 (d) ClO2

Solution.

Answer (from key): (b) BF3. μtotal = 0 due to coplanar (sp2) symmetric geometry of BF3.

Teacher's Note: Symmetric trigonal planar geometry cancels bond moments.

Exam Note: Polar bonds, zero resultant.

Question O-75. The molecule which has pyramidal shape is:
(a) PCl3 (b) SO3 (c) CO32- (d) NO3-

Solution.

Answer (from key): (a) PCl3. PCl3 is sp3 with one lone pair on P, giving a pyramidal shape; the others are planar sp2.

Teacher's Note: Three bond pairs plus one lone pair is pyramidal.

Exam Note: Others have no lone pair on the central atom.

Question O-76. The compound in which carbon use its sp3 hybrid orbitals for bond formation is (the carbon concerned is marked in the book):
(a) HCOOH (b) (H2N)2CO (c) (CH3)3COH (d) CH3CHO

Solution.

Answer (from key): (c) (CH3)3COH. The marked carbon in (CH3)3COH has four σ bonds, so sp3; the others are carbonyl carbons (sp2).

Teacher's Note: Four sigma bonds means sp3.

Exam Note: Identify the marked carbon first.

Question O-77. Which of the following is paramagnetic:
(a) O2 (b) CN- (c) CO (d) NO+

Solution.

Answer (from key): (a) O2. O2 is paramagnetic: it has two unpaired electrons; the other three have 14 electrons and all paired.

Teacher's Note: 14-electron species are diamagnetic.

Exam Note: O2 contradicts simple Lewis structure.

Question O-78. Which has highest ionisation energy?
(a) [Ne]3s23p1 (b) [Ne]3s23p3 (c) [Ne]3s23p2 (d) [Ar]3d10, 4s24p3

Solution.

Answer (from key): (b) [Ne]3s23p3. Half-filled nature of 3p3 (phosphorus); also IE decreases down the group, so P > As.

Teacher's Note: Half-filled subshell plus smaller size.

Exam Note: Compare P with Al, Si and As.

Question O-79. The hybridisation of carbon atom in C—C single bond of HC≡C—CH=CH2 is:
(a) sp3—sp3 (b) sp2—sp2 (c) sp—sp2 (d) sp3—sp

Solution.

Answer (from key): (c) sp—sp2. The C—C single bond joins the sp carbon of the triple bond and the sp2 carbon of the double bond.

Teacher's Note: Single bond joins the alkyne C and the alkene C.

Exam Note: Label each carbon by its bond type.

Question O-80. The type of hybrid orbitals used by the chlorine atom in ClO3- is:
(a) sp3 (b) sp2 (c) sp (d) none of these

Solution.

Answer (from key): (a) sp3. Cl in ClO3- has three bond pairs and one lone pair, so sp3 (pyramidal).

Teacher's Note: Three bonds + one lone pair = four regions.

Exam Note: Use the pyramidal shape as a check.

Question O-81. The maximum possible number of hydrogen bonds a water molecule can form is:
(a) 2 (b) 4 (c) 3 (d) 1

Solution.

Answer (from key): (b) 4. H—O—H with two H atoms and two lone pairs on O can form 4 hydrogen bonds.

Teacher's Note: Two donor H and two acceptor lone pairs.

Exam Note: Ice shows four H-bonds per molecule.

Question O-82. The cyanide ion, CN- and N2 are isoelectronic. But in contrast to CN-, N2 is chemically inert, because of:
(a) low bond energy (b) absence of bond polarity (c) unsymmetrical electron distribution (d) presence of more number of electrons in bonding orbitals

Solution.

Answer (from key): (b) absence of bond polarity. CN- is polar; N2 is non-polar, so it is not attacked by polar reagents.

Teacher's Note: Polar bond provides sites for reaction.

Exam Note: Same bond order, different polarity.

Question O-83. Allyl isocyanide has:
(a) 9σ and 4π bonds (b) 8σ and 5π bonds (c) 9σ, 3π bonds and 2 non bonding electrons (d) 8σ, 3π and 4 non bonding electrons

Solution.

Answer (from key): (c) 9σ, 3π bonds and 2 non bonding electrons. The key draws CH2=CH—CH2—N≡C: it has 9σ, 3π and 2 non-bonding electrons (on the terminal atom).

Teacher's Note: Count σ and π per bond type, then lone pairs.

Exam Note: Triple bond: 1σ + 2π.

Question O-84. Which one is most ionic?
(a) P2O5 (b) CrO3 (c) MnO (d) Mn2O7

Solution.

Answer (from key): (c) MnO. Lowest oxidation states of metals are more ionic (Fajans: lower charge, lower polarising power).

Teacher's Note: Lower oxidation state means more ionic.

Exam Note: Compare Mn(II) with Mn(VII).

Question O-85. Number of paired electrons in O2 molecule is:
(a) 7 (b) 8 (c) 16 (d) 14

Solution.

Answer (from key): (d) 14. O2 has 16 electrons out of which two are unpaired, so 14 are paired.

Teacher's Note: 16 total minus 2 unpaired.

Exam Note: Two unpaired electrons in π*.

Question O-86. Which of the following statement is true about CsBr3:
(a) It is a covalent compound (b) It contains Cs3+ and Br- ions (c) It contains Cs+ and Br3- ions (d) It contains Cs, Br- and lattice Br2 molecule

Solution.

Answer (from key): (c). CsBr3 has Cs+ and Br3- ions (Cs cannot be +3).

Teacher's Note: Large cation stabilises large polyhalide anion.

Exam Note: Cs has only +1 oxidation state.

Question O-87. KF combines with HF to form KHF2. The compound contains:
(a) K+, F- and H+ (b) K+, F- and HF (c) K+ and [HF2]- (d) [KHF]+ and F-

Solution.

Answer (from key): (c). KHF2 has K+ and [HF2]- ions (F—H···F-, strong hydrogen bond).

Teacher's Note: Bifluoride ion from hydrogen bonding of F- with HF.

Exam Note: Strong F–H···F bond defines HF2-.

Question O-88. Among the following compounds the one that is polar and has the central atom with sp2 hybridisation is:
(a) H2CO3 (b) SiF4 (c) BF3 (d) HClO2

Solution.

Answer (from key): (a) H2CO3. HO—C(=O)—OH has carbon with three σ bonds (sp2) and is polar; BF3 is sp2 but non-polar.

Teacher's Note: Need both sp2 and unsymmetrical.

Exam Note: BF3 is the symmetrical trap.

Question O-89. Which one of the following compounds has sp2 hybridisation?
(a) CO2 (b) SO2 (c) N2O (d) CO

Solution.

Answer (from key): (b) SO2. O=S=O (sp2) with a lone pair on S; the others are sp.

Teacher's Note: Steric number 3 at S.

Exam Note: CO2, N2O, CO are sp.

Question O-90. The incorrect statement is:
(a) IE1 of Al < IE1 of Mg (b) IE2 of Mg > IE2 of Na (c) IE1 of Na < IE1 of Mg (d) IE3 of Mg < IE3 of Al

Solution.

Answer (from key): (b) (as printed in the key; see note). Book key (b): removal of the 2nd electron from 3s in Mg and from 2p in Na (more close) makes IE2 of Na > IE2 of Mg, so statement (b) is incorrect. Note: statement (d) is also false (IE3 of Mg = 7733 kJ/mol, IE3 of Al = 2745 kJ/mol), so the question as printed has two incorrect statements.

Teacher's Note: Second IE of Na breaks the 2p6 core.

Exam Note: Check each statement with actual IE values.

Question O-91. The geometry and type of hybridisation about central atom of BF3 is:
(a) linear, sp (b) trigonal planar sp2 (c) tetrahedral sp3 (d) pyramidal, sp3

Solution.

Answer (from key): (b) trigonal planar sp2. sp2 leads to coplanar trigonal planar geometry of BF3.

Teacher's Note: Three bond pairs, no lone pair on B.

Exam Note: Give geometry and hybridisation together.

Question O-92. The correct order of increasing C—O bond length of CO, CO32-, CO2 is:
(a) CO32- < CO2 < CO (b) CO2 < CO32- < CO (c) CO < CO32- < CO2 (d) CO < CO2 < CO32-

Solution.

Answer (from key): (d) CO < CO2 < CO32-. Bond order: CO = 3, CO2 = 2, CO32- = 1.33; higher bond order means shorter bond, so the length order is CO < CO2 < CO32-.

Teacher's Note: Bond length is inversely related to bond order.

Exam Note: Carbonate has resonance bond order 1.33.

Question O-93. Ionic radii of:
(a) Ti4+ < Mn7+ (b) 35Cl- < 37Cl- (c) K+ > Cl- (d) P3+ > P5+

Solution.

Answer (from key): (d) P3+ > P5+. Due to more effective nuclear charge on P5+, the radii decreases: P3+ > P5+. (Ti4+ is larger than Mn7+, isotopes have equal radii, and K+ is smaller than Cl-.)

Teacher's Note: Higher positive charge on the same element shrinks the ion.

Exam Note: Isotopes do not differ in radius.

Question O-94. In the compound CH2=CH—CH2—CH2—C≡CH, the C2—C3 bond is of the type:
(a) sp–sp2 (b) sp3–sp3 (c) sp–sp3 (d) sp2–sp3

Solution.

Answer (from key): (d) sp2–sp3. Numbering the carbons 1 to 6, C2 (=CH) is sp2 and C3 (CH2) is sp3.

Teacher's Note: Same compound as Question 31.

Exam Note: Assign hybridisation carbon by carbon.

Question O-95. The correct order of radii is: (IIT 2000)
(a) N < Be < B (b) F- < O2- < N3- (c) Na < Li < K (d) Fe3+ < Fe2+ < Fe4+

Solution.

Answer (from key): (b) F- < O2- < N3-. Each has 10 electrons; the size of isoelectronic ions decreases as nuclear charge increases along the period.

Teacher's Note: Isoelectronic anions: more protons means smaller radius.

Exam Note: Other options misorder atomic or ionic radii.

Question O-96. Molecular shape of SF4, CF4 and XeF4 are: (IIT 2000)
(a) the same with 2, 0 and 1 lone pair of electron respectively (b) the same with 1, 1 and 1 lone pair of electron respectively (c) different with 0, 1 and 2 lone pairs of electron respectively (d) different with 1, 0 and 2 lone pairs of electron respectively

Solution.

Answer (from key): (d). SF4 has sp3d-hybridisation with one lone pair (see-saw), CF4 has sp3-hybridisation with no lone pair (tetrahedral) and XeF4 has sp3d2-hybridisation with two lone pairs (square planar).

Teacher's Note: Count lone pairs on the central atom for each.

Exam Note: Shapes differ: see-saw, tetrahedral, square planar.

Question O-97. The hybridisation of atomic orbitals of nitrogen in NO2+, NO3- and NH4+ are: (IIT 2000)
(a) sp, sp3 and sp2 respectively (b) sp, sp2 and sp3 respectively (c) sp2, sp and sp3 respectively (d) sp2, sp3 and sp respectively

Solution.

Answer (from key): (b). The hybridised states of N in NO2+, NO3- and NH4+ are sp, sp2 and sp3 respectively.

Teacher's Note: Two, three and four sigma bonds respectively.

Exam Note: NO2+ is linear like CO2.

Question O-98. Amongst H2O, H2S, H2Se and H2Te, the one with the highest boiling point is: (IIT 2000)
(a) H2O because of H-bonding (b) H2Te because of higher molar mass (c) H2S because of H-bonding (d) H2Se because of lower molar mass

Solution.

Answer (from key): (a) H2O because of H-bonding. It is a reason for the given fact: hydrogen bonding among H2O molecules raises its boiling point above the other hydrides.

Teacher's Note: Hydrogen bonding in water outweighs molar mass trend.

Exam Note: Boiling point anomaly of H2O.

Question O-99. The correct order of hybridization of the central atom in the following species NH3, [PtCl4]2-, PCl5 and BCl3 is: (IIT 2001)
(a) dsp2, dsp3, sp2, sp3 (b) sp3, dsp2, sp3d, sp2 (c) dsp2, sp2, sp3, dsp3 (d) dsp2, sp3, sp2, dsp3

Solution.

Answer (from key): (b). N in NH3 is sp3, Pt in [PtCl4]2- is dsp2, P in PCl5 is sp3d and B in BCl3 is sp2.

Teacher's Note: Square planar Pt(II) is dsp2.

Exam Note: Keep the order of species as asked.

Question O-100. The common features among the species CN-, CO and NO+ are: (IIT 2001)
(a) bond order 3 and isoelectronic (b) bond order 3 and weak field ligands (c) bond order 2 and π-acceptor (d) isoelectric and weak field ligands

Solution.

Answer (from key): (a) bond order 3 and isoelectronic. Each possesses 14 electrons with bond order 3.

Teacher's Note: All three have 14 electrons, like N2.

Exam Note: CN- and CO are strong-field ligands.

Question O-101. The set representing the correct order for first ionisation potential is: (IIT 2001)
(a) K > Na > Li (b) Be > Mg > Ca (c) B > C > N (d) Ge > Si > C

Solution.

Answer (from key): (b) Be > Mg > Ca. The IE1 decreases down the group: Be (899) > Mg (738) > Ca (590 kJ/mol).

Teacher's Note: IE falls down a group as size increases.

Exam Note: Check each set for group or period trend.

Question O-102. Specify the coordination geometry around and hybridisation of N and B atoms in a 1:1 complex of NH3 and BF3: (IIT 2002)
(a) N: tetrahedral, sp3; B: tetrahedral, sp3 (b) N: pyramidal, sp3; B: pyramidal, sp3 (c) N: pyramidal, sp3; B: planar, sp2 (d) N: pyramidal, sp3; B: tetrahedral, sp3

Solution.

Answer (from key): (a). NH3 + BF3 → [H3N→BF3]: after adduct formation N (sp3) and B (sp3) both have four σ bonds and are tetrahedral.

Teacher's Note: Donor–acceptor bond makes both atoms four-coordinate.

Exam Note: B changes from sp2 to sp3.

Question O-103. The least stable amongst the following is: (IIT 2002)
(a) Li- (b) Be- (c) B- (d) C-

Solution.

Answer (from key): (b) Be-. Li-: 1s22s2 (EA1 negative); Be-: 1s22s22p1 (EA2 positive, since the extra electron enters the higher 2p orbital of the filled-2s Be).

Teacher's Note: Be has a filled 2s, so it resists gaining an electron.

Exam Note: Be has positive electron gain enthalpy.

Question O-104. Which of the following molecular species has unpaired electrons: (IIT 2002)
(a) N2 (b) F2 (c) O2- (d) O22-

Solution.

Answer (from key): (c) O2-. O2- has one unpaired electron in π*; N2, F2 and O22- have all electrons paired.

Teacher's Note: Superoxide has 17 electrons: odd count.

Exam Note: Peroxide O22- is diamagnetic.

Question O-105. The nodal plane in the π-bond of ethene is located in: (answer options (a)–(d))
(a) the molecular plane (b) a plane parallel to the molecular plane (c) a plane perpendicular to the molecular plane which bisects the carbon–carbon sigma bond at right angles (d) a plane perpendicular to the molecular plane which contains the carbon–carbon sigma bond

Solution.

Answer (from key): (a) the molecular plane. A π-bond nodal plane passes through the two bonded nuclei, i.e., the molecular plane.

Teacher's Note: π bond lies above and below the molecular plane.

Exam Note: Node of π orbital contains both nuclei.

Question O-106. Among the following the molecule with the highest dipole moment is: (IIT 2003)
(a) CH3Cl (b) CH2Cl2 (c) CHCl3 (d) CCl4

Solution.

Answer (from key): (a) CH3Cl. μCCl4 = 0, μCHCl3 = 1.0 D, μCH2Cl2 = 1.6 D, μCH3Cl = 1.8 D.

Teacher's Note: Vector sum of C–Cl moments partly cancels as Cl count grows.

Exam Note: Memorise 1.8, 1.6, 1.0, 0 D.

Question O-107. Which of the following are isoelectronics and isostructural: NO3-, CO32-, ClO3-, SO3 (IIT 2003)
(a) NO3-, CO32- (b) SO3, NO3- (c) ClO3-, CO32- (d) CO32-, SO3

Solution.

Answer (from key): (a) NO3-, CO32-. Both NO3- and CO32- have 32 electrons and the central atom in each is sp2-hybridised (trigonal planar); SO3 has 40 and ClO3- (pyramidal) has 42 electrons.

Teacher's Note: Isoelectronic here means equal total electrons (32).

Exam Note: Match both electron count and shape.

Question O-108. Which of the following represents the given mode of hybridisation sp2–sp2–sp–sp from left to right: (IIT 2003)
(a) CH2=CH—C≡CH (b) CH≡C—C≡CH (c) CH2=C=C=CH2 (d) CH2=CH—CH=CH2

Solution.

Answer (from key): (a) CH2=CH—C≡CH. CH2=CH—C≡CH has sp2 (CH2), sp2 (CH), sp, sp from left to right.

Teacher's Note: Assign hybridisation by bond type.

Exam Note: Double bond gives sp2, triple sp.

Question O-109. Total number of lone pair of electrons in XeOF4 is: (IIT 2004)
(a) 0 (b) 1 (c) 2 (d) 3

Solution.

Answer (from key): (b) 1. Xe in XeOF4 shows sp3d2-hybridisation with one lone pair on the Xe atom (square pyramidal).

Teacher's Note: Xe has 8 electrons; 6 used in bonds.

Exam Note: Count lone pairs on Xe only.

Question O-110. Which statement is correct about O2+: (IIT 2004)
(a) Paramagnetic and bond order < O2 (b) Paramagnetic and bond order > O2 (c) Diamagnetic and bond order < O2 (d) Diamagnetic and bond order > O2

Solution.

Answer (from key): (b). O2+ has one unpaired electron (paramagnetic) and bond order 2.5, which is greater than 2 for O2.

Teacher's Note: Removing an antibonding electron raises bond order.

Exam Note: O2+: BO 2.5, one unpaired electron.

Question O-111. Which species has the maximum number of lone pair of electrons on the central atom: (IIT 2005)
(a) [ClO3]- (b) XeF4 (c) SF4 (d) [I3]-

Solution.

Answer (from key): (d) [I3]-. I3-, XeF4, SF4 and ClO3- have 3, 2, 1, 1 lone pair respectively on the central atom.

Teacher's Note: Count lone pairs on the central atom of each species.

Exam Note: I3- has three equatorial lone pairs.

Question O-112. If the bond length of C—O bond in carbon monoxide is 1.128 Å, then what is the value of C—O bond length in Fe(CO)5: (IIT 2006)
(a) 1.15 Å (b) 1.128 Å (c) 1.72 Å (d) 1.118 Å

Solution.

Answer (from key): (a) 1.15 Å. Due to synergic bond formation between CO and metal (back donation into π* of CO), the C—O bond length increases.

Teacher's Note: Back donation populates π* of CO and weakens C≡O.

Exam Note: Metal carbonyl CO is longer than free CO.

Question O-113. The species having different bond order than that of CO is: (IIT 2007)
(a) NO (b) NO+ (c) CN- (d) N2

Solution.

Answer (from key): (a) NO. Corrected: the book keys (b). CO, NO+, CN- and N2 are all 14-electron species with bond order 3, whereas NO (15 electrons) has bond order 2.5, so the different one is NO.

Teacher's Note: Count electrons: NO has 15, the rest 14.

Exam Note: Odd-electron NO has bond order 2.5.

Question O-114. Among the following the paramagnetic compound is: (IIT 2007)
(a) Na2O2 (b) O3 (c) N2O (d) KO2

Solution.

Answer (from key): (d) KO2. It has O2- (superoxide) with one unpaired electron; Na2O2 (peroxide), O3 and N2O are diamagnetic.

Teacher's Note: Superoxide has an odd electron.

Exam Note: Peroxide ion is diamagnetic.

Question O-115. The percentage of p-character in the orbitals of P4 forming P—P bond is: (IIT 2007)
(a) 25 (b) 33 (c) 50 (d) 75

Solution.

Answer (from key): (d) 75. P4 has sp3-hybridisation: s-character 25% and p-character 75%.

Teacher's Note: sp3 hybrid is 25% s and 75% p.

Exam Note: Each P uses three orbitals for P–P bonds.

Question O-116. Among the following, the least stable resonance structure is: (IIT 2007) (the book shows four charge-separated resonance forms (a)–(d) of a conjugated nitro-alkene, CH2=CH—CH=CH—NO2, with different positions of + and − charges on the carbon chain, nitrogen carrying + and the oxygens a − charge)
(a), (b), (c), (d) as drawn in the book

Solution.

Answer (from key): (a). Per the key, structure (a) is least stable: in it the positively charged carbon is directly attached to the positively charged nitrogen of the nitro group, so two like charges are adjacent.

Teacher's Note: Adjacent like charges make a resonance form very unstable.

Exam Note: Rank forms by charge separation and adjacency.

Question O-117. Among the following statement, the correct statement about PH3 and NH3 is: (IIT 2008)
(a) NH3 is a better electron donor because the lone pair of electron occupies spherical s-orbital and is less directional (b) PH3 is a better electron donor because the lone pair of electron occupies sp3-orbital and is more directional (c) NH3 is a better electron donor because the lone pair of electron occupies sp3-orbital and more directional (d) PH3 is a better electron donor because the lone pair of electron occupies spherical s-orbital and is less directional

Solution.

Answer (from key): (c). Basic character of hydrides: NH3 > PH3, because the lone pair of N sits in a directional sp3 orbital.

Teacher's Note: N lone pair is more directional and available.

Exam Note: Basicity falls down group 15.

Question O-118. The correct stability order of the following resonating structures is: (IIT 2009) (the book draws four resonance structures (i)–(iv) of diazomethane, CH2N2, with different charge placements)
(a) (i) > (ii) > (iv) > (iii) (b) (i) > (iii) > (ii) > (iv) (c) (ii) > (i) > (iii) > (iv) (d) (iii) > (i) > (iv) > (ii)

Solution.

Answer (from key): (b) (i) > (iii) > (ii) > (iv). Follow the characteristics of resonance: structures with complete octets and negative charge on the more electronegative atom are more stable. (The book lists the four structures of diazomethane as figures; their order is taken from the key.)

Teacher's Note: Octet-complete forms with charge on the electronegative atom win.

Exam Note: Rank forms by octets then charge placement.

Question O-119. The species having pyramidal shape is: (IIT 2010)
(a) SO3 (b) BrF3 (c) SiO32- (d) OSF2

Solution.

Answer (from key): (d) OSF2. OSF2 has sp3-hybridised S with one lone pair, giving a pyramidal shape.

Teacher's Note: Three bond regions plus one lone pair makes a pyramid.

Exam Note: SO3 is planar; BrF3 is T-shaped.

Question O-120. Assuming that Hund’s rule is violated, the bond order and magnetic nature of diatomic molecule of B2 is: (IIT 2016)
(a) 1 and diamagnetic (b) zero and diamagnetic (c) 1 and paramagnetic (d) zero and paramagnetic

Solution.

Answer (from key): (a) 1 and diamagnetic. In the absence of Hund’s rule the MO diagram of B2 will be σ1s2, σ*1s2, σ2s2, σ*2s2, π2px2 with paired electrons, so bond order = (6 − 4)/2 = 1 and it is diamagnetic.

Teacher's Note: Pairing the last two electrons in one π orbital removes paramagnetism.

Exam Note: Bond order stays 1.

Question O-121. In allene (C3H4), the type(s) of hybridization of the carbon atoms is/are: (IIT 2012)
(a) sp and sp3 (b) sp and sp2 (c) only sp2 (d) sp2 and sp3

Solution.

Answer (from key): (b) sp and sp2. In H2C=C=CH2 the terminal carbons are sp2 and the central carbon is sp.

Teacher's Note: Central cumulated carbon is sp.

Exam Note: Terminal =CH2 carbons are sp2.

Question O-122. The shape of XeO2F2 molecule is: (IIT 2012)
(a) trigonal bipyramidal (b) square planar (c) tetrahedral (d) see-saw

Solution.

Answer (from key): (d) see-saw. Xenon in XeO2F2 shows sp3d-hybridisation having one lone pair of electrons; the shape is see-saw.

Teacher's Note: Five electron regions with one lone pair give see-saw.

Exam Note: Same structure as in Numerical Problem 38.

Question O-123. Which one of the following molecules is expected to exhibit diamagnetic behaviour? [JEE (Main) 2013]
(a) O2 (b) S2 (c) C2 (d) N2

Solution.

Answer (from key): (c), (d) (as printed in the key). Both (C2 and N2) are diamagnetic as both have no unpaired electron; O2 and S2 both have two unpaired electrons.

Teacher's Note: Fill MOs and look for unpaired electrons.

Exam Note: C2 has all electrons paired in π orbitals.

Question O-124. In which of the following pairs of molecules/ions, both the species are not likely to exist? [JEE (Main) 2013]
(a) H22+, He2 (b) H2-, He22+ (c) H2+, He22- (d) H2-, He22-

Solution.

Answer (from key): (a) H22+, He2. Both H22+ and He2 (σ1s2σ*1s2) have bond order zero.

Teacher's Note: Bond order zero means the species does not exist.

Exam Note: H22+ has no electrons.

Question O-125. Which of the following represents the correct order of increasing first ionisation enthalpy for Ca, Ba, S, Se and Ar? [JEE (Main) 2013]
(a) Ba < Ca < Se < S < Ar (b) Ca < Ba < S < Se < Ar (c) Ca < S < Ba < Se < Ar (d) S < Se < Ca < Ba < Ar

Solution.

Answer (from key): (a) Ba < Ca < Se < S < Ar. Ionisation enthalpy increases along the period but decreases down the group: Ba (503) < Ca (590) < Se (941) < S (1000) < Ar (1520 kJ/mol).

Teacher's Note: Combine group trend (down decreases) and period trend (right increases).

Exam Note: Metals low, non-metals higher, noble gas highest.

Question O-126. Stability of the species Li2, Li2- and Li2+ increases in the order of: [JEE (Main) 2013]
(a) Li2 < Li2- < Li2+ (b) Li2- < Li2 < Li2+ (c) Li2 < Li2+ < Li2- (d) Li2- < Li2+ < Li2

Solution.

Answer (from key): (d) Li2- < Li2+ < Li2. Bond order for Li2, Li2+ and Li2- are 1, 0.5 and 0.5 respectively. However Li2+ (one antibonding electron fewer) is more stable than Li2- because Li2- has three antibonding electrons.

Teacher's Note: Equal bond order: fewer antibonding electrons means more stable.

Exam Note: Rank by bond order, then antibonding count.

Question O-127. The first ionisation potential of Na is 5.1 eV. The value of electron gain enthalpy of Na+ will be: [JEE (Main) 2013]
(a) −10.2 eV (b) +2.55 eV (c) −2.55 eV (d) −5.1 eV

Solution.

Answer (from key): (d) −5.1 eV. Na(g) → Na+(g) + e, IE = 5.1 eV; Na+(g) + e → Na(g), EA = −IE = −5.1 eV.

Teacher's Note: Electron gain by a cation is the reverse of its ionisation.

Exam Note: Reverse process flips the sign.

Objective Problems (More Than One Answer Correct)

Question M-1. Select the correct statements:
(a) Ionisation energy increases for each successive electron removal. (b) The greatest increase in ionisation enthalpy is experienced on removal of electron from the case of noble gas. (c) End of valence electrons is marked by a big jump in ionisation enthalpy. (d) Removal of electron from orbitals bearing lower n values is easier than from orbital having higher n value.

Solution.

Answer (from key): (a), (b), (c). Lower the value of n, higher is the energy needed, so statement (d) is wrong; (a), (b) and (c) are correct.

Teacher's Note: Ionisation energy rises sharply when removal begins from an inner shell.

Exam Note: Inner (lower n) electrons are harder to remove.

Question M-2. Which of the following compounds have electrovalent, covalent and coordinate bonds but do not have hydrogen bond?
(a) CaCl2·2H2O (b) CuSO4·5H2O (c) FeSO4·7H2O (d) Na2SO4·10H2O

Solution.

Answer (from key): (a), (c), (d). CuSO4·5H2O has [Cu(H2O)4]SO4·H2O (with hydrogen bonding), so it is excluded.

Teacher's Note: Pick hydrates without hydrogen-bonded lattice water, per key.

Exam Note: Exclude CuSO4·5H2O.

Question M-3. Which are correct about the structure of trimer of SO3, i.e., S3O9?
(a) It has cyclic structure (b) It has two S—S bonds (c) It has three S—O—S bonds (d) It has sp2-hybridization of S and 12σ and 6π-bonds

Solution.

Answer (from key): (a), (c). Corrected: the book keys (a), (c), (d). S3O9 is a six-membered ring (S—O—S three times, so (a) and (c) are correct) with no S—S bonds; each S is bonded to four O atoms (two ring O and two terminal =O), so S is sp3, not sp2, and statement (d) is wrong (the counts 12σ and 6π are right).

Teacher's Note: Each S has four sigma bonds, hence sp3.

Exam Note: Check hybridisation in (d).

Question M-4. Which are correct for white phosphorus molecule?
(a) It exists as P4 (b) P—P bond length equal to 2.21 Å (c) P—P bond angle is 109°28′ (d) It has sp3-hybridization and tetrahedron structure

Solution.

Answer (from key): (a), (b), (d). P4 is tetrahedral with P—P bond angle 60° (the molecule is under strain, which is why it is very reactive), so (c) is wrong.

Teacher's Note: Tetrahedral P4 molecule has 60° angles, not 109°28′.

Exam Note: Strained 60° angle explains reactivity.

Question M-5. Which of the following are correct about bond angles?
(a) OSF2 < OSCl2 < OSBr2 (b) SbI3 < AsI3 < PI3 (c) PF3 > PCl3 < PBr3 < PI3 (d) NO2- < NO2 < NO2+

Solution.

Answer (from key): (a), (b), (d). Corrected: the book keys (a), (b), (c), (d). Experimentally PF3 (97.8°) < PCl3 (100.3°) < PBr3 (101°) < PI3 (102°), so (c) is incorrect. (a) 92.3° < 96° < 96.2°, (b) 99° < 100° < 102°, and (d) 115° < 134° < 180° are correct.

Teacher's Note: Bond angle rises as the halogen becomes bigger and less electronegative.

Exam Note: Check PF3 against PCl3.

Question M-6. Which of the following are correct for CO+, N2+?
(a) Both have 13 electrons (b) N2+ has bond order 2.5 whereas CO+ has bond order 3.5 (c) Both have same M.O. configuration (d) Bond length of N—N in N2+ is greater than N2 but bond length of CO+ is shorter than CO

Solution.

Answer (from key): (a), (c), (d). Corrected: the book keys (a), (b), (c), (d). N2+: σ1s2, σ*1s2, σ2s2, σ*2s2, π2py2 π2pz2, σ2px1; CO+ has the same 13-electron configuration, so both have bond order (9 − 4)/2 = 2.5 and (b) is wrong (CO+ is not 3.5). Statement (d) agrees with the experimental bond lengths (N2+ longer than N2; CO+ 1.115 Å shorter than CO 1.128 Å).

Teacher's Note: 13-electron species: bond order 2.5.

Exam Note: Compute bond order from electron count.

Question M-7. Which facts are correctly represented?
(a) Bond length: NO+ < NO2+ < NO < NO- (b) Bond order: NO+ > NO2+ = NO > NO- (c) Bond length: NO+ < NO2+ = NO < NO- (d) Bond order: NO+ > NO2+ > NO > NO-

Solution.

Answer (from key): (b), (c). Corrected: the book keys (a), (b). Bond orders: NO+ = 3, NO2+ (13 electrons) = 2.5, NO (15 electrons) = 2.5, NO- = 2. Equal bond order means NO2+ and NO have equal bond length, so (b) and (c) are correct; (a) and (d) wrongly separate NO2+ and NO.

Teacher's Note: NO2+ and NO both have bond order 2.5.

Exam Note: Bond length inversely follows bond order.

Question M-8. In which of the following H-atom attached to carbon atom shows H-bonding?
(a) CCl3·CH(OH)2 (b) CHCl3 in acetone (c) CH3·CO·CH3 (d) CH3·CO·CH2COOC2H5

Solution.

Answer (from key): (a), (b). Due to increasing charge density of carbon on account of higher electronegativity of Cl, the C—H hydrogens in these show H-bonding.

Teacher's Note: Electron-withdrawing Cl makes C–H acidic enough to H-bond.

Exam Note: CHCl3 forms C–H···O with acetone.

Question M-9. Which of the following are correct?
(a) PH5 and BiCl5 does not exist (b) SeF4 and CH4 have same geometry (c) pπ—dπ bonds are present in SO2 (d) Nodal plane in the π-bonds of ethane are located in molecular plane

Solution.

Answer (from key): (a), (c), (d). SeF4 (sp3d, see-saw) and CH4 (sp3, tetrahedral) have different geometries, so (b) is wrong; the others are correct (the π-bond statement refers to the C=C π bond of ethene).

Teacher's Note: Different hybridisation gives different geometry.

Exam Note: Check lone pairs for SeF4.

Question M-10. Select the correct statements:
(a) IE1 of deuterium is more than IE1 of H (b) maximum electron affinity exists for F (c) maximum IE stands for He (d) trans-pent-2-ene is polar

Solution.

Answer (from key): (a), (c), (d). Maximum electron affinity belongs to Cl, not F, so (b) is wrong.

Teacher's Note: Cl has a higher EA than F because of F’s small 2p subshell.

Exam Note: He has the highest ionisation energy.

Question M-11. Select the correct statements:
(a) There are two π-bonds in N2 molecule (b) Delocalisation involving sigma bond orbitals is called hyperconjugation (c) Dipole moment of CH3F is greater than CH3Cl (d) C2H2, CO2, SnCl2 all are linear molecules

Solution.

Answer (from key): (a), (b). Corrected: the book keys (a), (b), (c) (it notes SnCl2 is angular because of sp2-hybridisation, so (d) is wrong). The dipole moment of CH3Cl (about 1.9 D) is slightly greater than that of CH3F (about 1.8 D), so (c) is incorrect.

Teacher's Note: CH3Cl has the larger dipole despite lower electronegativity of Cl, due to longer bond.

Exam Note: Dipole = charge × distance.

Question M-12. Resonance molecule should have:
(a) identical arrangement of atoms (b) nearly same energy content (c) the same number of paired electrons (d) identical bonding

Solution.

Answer (from key): (a), (b), (c). These are characteristics of resonance; bonding differs among the contributing structures, so (d) is not required.

Teacher's Note: Resonance forms differ only in electron arrangement.

Exam Note: Nuclei positions are identical.

Question M-13. Dipole moment is shown by:
(a) 1,4-dichloro-type symmetric compound (as printed: 1,4-dichloro ethane) (b) cis-1,2-dichloro ethane (c) trans-1,2-dichloro ethane (d) 1,2-dichloro-2-pentene

Solution.

Answer (from key): (b), (d). μ for (a) = 0 and μ for (c) = 0 (the bond moments cancel by symmetry); (b) and (d) are unsymmetrical and polar.

Teacher's Note: Symmetrical trans or para arrangement cancels dipoles.

Exam Note: Cis and unsymmetrical forms are polar.

Question M-14. CO2 is isostructural with:
(a) HgCl2 (b) SnCl2 (c) C2H2 (d) NO2

Solution.

Answer (from key): (a), (c). Both HgCl2 and C2H2 have sp-hybridisation and are linear like CO2.

Teacher's Note: Linear molecules share sp central atoms.

Exam Note: SnCl2 and NO2 are bent.

Question M-15. Which of the following are correct?
(a) The ionisation potential of oxygen is less than that of nitrogen. (b) The ionisation potential of nitrogen is greater than that of oxygen. (c) The two ionisation potential values are comparable. (d) The differences between the two ionisation potential values is too large.

Solution.

Answer (from key): (a), (b), (c). N (half-filled 2p3) has IE1 = 14.6 eV against 13.6 eV for O: the two values are comparable, not far apart.

Teacher's Note: Half-filled stability raises N’s IE.

Exam Note: Values differ by only 1 eV.

Question M-16. Sodium sulphate is soluble in water whereas barium sulphate is sparingly soluble because:
(a) The hydration energy of Na2SO4 is more than its lattice energy (b) The lattice energy of BaSO4 is more than its hydration energy (c) The lattice energy has no role in solubility (d) The hydration energy of Na2SO4 is less than lattice energy

Solution.

Answer (from key): (a), (b). These are the facts: a salt dissolves if hydration energy exceeds lattice energy, which is the case for Na2SO4 but not for BaSO4.

Teacher's Note: Solubility depends on hydration energy minus lattice energy.

Exam Note: Compare the two energies.

Question M-17. The linear structure is assumed by:
(a) SnCl2 (b) NCO- (c) CS2 (d) NO2+ (e) SO2

Solution.

Answer (from key): (b), (c), (d). Corrected: the book keys (b), (c) ("both are linear"). NO2+ is isoelectronic with CO2 and is also sp-hybridised and linear; SnCl2 and SO2 are bent.

Teacher's Note: Sixteen valence electrons AX2 species are linear.

Exam Note: NO2+ is isoelectronic with CO2.

Question M-18. Which of the following have identical bond order?
(a) CN- (b) O2- (c) NO+ (d) CN+

Solution.

Answer (from key): (a), (c). Bond order for both CN- and NO+ is 3 (14 electrons).

Teacher's Note: 14-electron species have bond order 3.

Exam Note: O2- has 1.5.

Question M-19. The molecules that will have dipole moment are:
(a) 2,2-dimethylpropane (b) trans-2-pentene (c) cis-3-hexene (d) 2,2,3,3-tetramethylbutane

Solution.

Answer (from key): (b), (c). μ for (a) = 0 and for (d) = 0 due to symmetry; (b) and (c) are unsymmetrical alkenes with a small dipole moment.

Teacher's Note: Symmetric tetrahedral alkanes have zero dipole.

Exam Note: Alkenes have small non-zero dipoles.

Question M-20. Pick out the isoelectronic structures from the following: I CH3+, II H3O+, III NH3, IV CH3-
(a) I and II (b) III and IV (c) I and III (d) II, III and IV

Solution.

Answer (from key): (b), (d). NH3, CH3- and H3O+ have 10 electrons each and sp3-hybridisation; CH3+ has 8.

Teacher's Note: Count total electrons: 8 for CH3+, 10 for the rest.

Exam Note: All three 10-electron species are pyramidal.

Question M-21. A, B and C are hydroxy compounds of the elements X, Y and Z respectively. X, Y and Z are in the same period of periodic table. A gives an aqueous solution of pH less than 7. B reacts with both strong acid and strong base. C gives an aqueous solution which is strongly basic. Which of the following statements is/are true?
(a) The three elements are non-metal (b) The electronegativities decrease from X to Z (c) The atomic radius decreases in the order Z > Y > X (d) X, Y and Z may be phosphorus, aluminium and potassium respectively

Solution.

Answer (from key): (b), (c). X is a non-metal (e.g. O3Cl—OH acidic), Y is amphoteric (e.g. Al(OH)3) and Z is a metal (e.g. KOH, basic). Across a period electronegativity increases and radius decreases from Z to X, so (b) and (c) hold; (a) is wrong, and P, Al and K are not in the same period, so (d) is wrong.

Teacher's Note: Acidic, amphoteric, basic hydroxides run left to right across a period.

Exam Note: Elements must be in the same period.

Question M-22. Which of the following statement is incorrect?
(a) O2 is paramagnetic, O3 is also paramagnetic (b) O2 is paramagnetic, N22+ is also paramagnetic (c) B2 is paramagnetic, C2 is also paramagnetic (d) Different observation is found in their bond length when NO → NO+ and CO → CO+

Solution.

Answer (from key): (b), (d) as in the key; see note. Book key: (b), (d). Note: checking the statements, O3 is diamagnetic, N22+ (12 electrons) is diamagnetic like C2, and C2 is diamagnetic, so (a), (b) and (c) are all incorrect as printed; for (d) both NO → NO+ and CO → CO+ show a decrease in bond length. The answer given is the book key and should be checked by a teacher.

Teacher's Note: Only O2 and B2 are paramagnetic among O2, O3, N22+, B2, C2.

Exam Note: Test each species by counting unpaired electrons.

Question M-23. Which of the following statement(s) is/are correct?
(a) The removal of one electron from Na+(g) ion requires more energy than that from Mg+(g) (b) The hydration energy of Na+ ion is more than that of K+ ion (c) Ionic radii follows the order for three elements (X, Y, Z) of same period belonging to group 1, 2 and 3 (i.e., IA, IIA and IIIA) in the periodic table is X+ > Y2+ > Z3+ (d) With the increasing electronegativity (which increases with rise in positive charge), the basic strength of any elemental oxide decreases

Solution.

Answer (from key): (a), (b), (c), (d). All follow the standard concepts: Na+ has a noble-gas core (IE2 = 4562 against 1450 kJ/mol for Mg+), smaller Na+ hydrates more, isoelectronic cations shrink as charge rises, and oxides become less basic as electronegativity rises.

Teacher's Note: Check each against charge density and electron configuration.

Exam Note: All four statements are valid.

Question M-24. Which of the following shows same hybridised state?
(a) central N atom of azide ion (N3-) (b) N atom in NO2F (c) central O atom of ozone (d) N atoms in N2F2

Solution.

Answer (from key): (b), (c), (d). The central atom of azide ion has sp-hybridisation, whereas N in NO2F, the central O of O3 and the N atoms of F—N=N—F are all sp2.

Teacher's Note: Count sigma bonds plus lone pairs for each atom.

Exam Note: Azide is sp; the rest are sp2.

Comprehension Based Problems

Comprehension 1: Dipole moment

Question C-1. Dipole moment of HCl molecule is found to be 0.816 D. Assuming HCl bond length to be equal to 1 Å, the % ionic character of HCl molecule is:
(a) 10% (b) 17% (c) 27% (d) 37%

Solution.

Answer (from key): (b) 17%. μ = δ × d: 0.816 × 10-18 = δ × 10-8, so δ = 0.816 × 10-10 esu; % ionic character = (0.816 × 10-10/4.803 × 10-10) × 100 = 16.9% ≈ 17%.

Teacher's Note: Percent ionic = (μ/(e × d)) × 100.

Exam Note: Convert 1 D to esu cm.

Question C-2. The correct increasing order of dipole moment of the following compounds is: I Toluene; II o-dichlorobenzene; III m-dichlorobenzene; IV p-dichlorobenzene
(a) I < II < III < IV (b) IV < I < III < II (c) I < IV < III < II (d) IV < I < II < III

Solution.

Answer (from key): (b) IV < I < III < II. The o-isomer has θ = 60° (largest resultant), m has θ = 120°, p has θ = 180° (zero); toluene has a small moment. Hence IV (0) < I < III < II.

Teacher's Note: Resultant of two equal bond moments grows as the angle between them shrinks.

Exam Note: Use the vector formula with θ = 60°, 120°, 180°.

Question C-3. Dipole moment of (1) p-dinitrobenzene (2) p-dichlorobenzene and (3) p-dimethoxybenzene are in the order:
(a) 3 > 2 > 1 (b) 3 = 2 > 1 (c) 3 = 2 = 1 (d) 3 > (2 = 1)

Solution.

Answer (from key): (d) 3 > (2 = 1). p-Dinitrobenzene and p-dichlorobenzene are symmetrical with μ = 0; in p-dimethoxybenzene the orientation of the methoxy (OCH3) groups makes the resultant non-zero (the book notes the orientation of the CH3 groups).

Teacher's Note: Para substituents cancel unless their bond orientation breaks symmetry.

Exam Note: Methoxy groups can be oriented to give net dipole.

Question C-4. Match the compounds in list-I with their correct values of dipole moment (D) of list-II: List-I: 1. o-nitrophenol, 2. o-dichlorobenzene, 3. o-xylene; List-II: (A) 0.05, (B) 1.00, (C) 1.20
(a) 1-A, 2-B, 3-C (b) 1-B, 2-A, 3-C (c) 1-C, 2-A, 3-B (d) 1-C, 2-B, 3-A

Solution.

Answer (from key): (c) 1-C, 2-A, 3-B. As given in the key: o-nitrophenol – C (1.20 D), o-dichlorobenzene – A (0.05 D), o-xylene – B (1.00 D). (These dipole values are as listed in the book and could not be independently checked.)

Teacher's Note: Match using the key; values are the book’s.

Exam Note: Note the list values are unusual.

Question C-5. Identify the correct increasing order of the stability of the following alkenes: I cis-2-butene; II trans-2-butene; III isobutene
(a) II < III < I (b) I < III < II (c) I < II < III (d) III < II < I

Solution.

Answer (from key): (c) I < II < III. Corrected: the book keys (d) with a stability order cis-2-butene > trans-2-butene > isobutene. Heats of formation show the opposite: cis-2-butene (about −7.7 kJ/mol) is least stable, then trans-2-butene (about −11 kJ/mol), then isobutene (about −17 kJ/mol), the most stable because the double bond is more substituted/branched. So the increasing order is I < II < III. (The dipole moments are: I small, II = 0, III maximum, as in the book.)

Teacher's Note: trans is more stable than cis (less steric strain).

Exam Note: Compare heats of formation of the isomers.

Question C-6. Which of the following species is non polar?
(a) Ammonia (b) Sulphur dioxide (c) Water (d) Sulphur trioxide

Solution.

Answer (from key): (d) Sulphur trioxide. SO3 has sp2-hybridisation and three equal vectors act at 120°, so the resultant is zero.

Teacher's Note: Symmetric trigonal planar molecule cancels dipoles.

Exam Note: NH3, SO2, H2O are polar.

Question C-7. The increasing order of dipole moment of bond in halogen acids is: (answer given in decreasing form in the key)
(a) HF > HCl > HBr > HI (b) HI > HCl > HBr > HF (c) HCl > HBr > HI > HF (d) HI > HBr > HF > HCl

Solution.

Answer (from key): (a) HF > HCl > HBr > HI. The electronegativity order is F > Cl > Br > I, so the bond polarity (dipole moment) follows HF > HCl > HBr > HI. (As printed, the question says “increasing”; the keyed option lists the order from highest to lowest.)

Teacher's Note: Bond dipole follows electronegativity difference with H.

Exam Note: Order runs HF highest, HI lowest.

Question C-8. Which molecule is non polar?
(a) trans-Pent-2-ene (b) cis-Pent-2-ene (c) cis-1-chloropropene (d) SF6

Solution.

Answer (from key): (d) SF6. SF6 has octahedral geometry having μ = 0.

Teacher's Note: Perfect octahedral symmetry cancels all dipoles.

Exam Note: Alkenes and chloropropene are polar.

Question C-9. Which species is polar?
(a) trans-Hex-3-ene (b) trans-But-2-ene (c) PCl5 (d) XeF6

Solution.

Answer (from key): (d) XeF6. XeF6 has sp3d3-hybridisation and a distorted (pentagonal pyramidal in the key) shape with a lone pair, so it is polar.

Teacher's Note: Lone pair distorts the geometry and leaves a net dipole.

Exam Note: trans alkenes and PCl5 are non-polar.

Statement-Explanation Problems

Question S-1. S: Cs and F2 reacts violently.
E: Cs is most electropositive and F2 is most electronegative.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement: the largest electropositivity difference gives a violent ionic reaction.

Teacher's Note: Reactivity is highest between the most electropositive metal and most electronegative non-metal.

Exam Note: Link violence to extreme electronegativity difference.

Question S-2. S: Transition elements exhibit horizontal and vertical relationship.
E: The shielding effect as well as same outermost shell configuration in transition metals are responsible for their behaviour.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Poor d-shielding and similar outer ns configuration cause horizontal similarity.

Exam Note: Similar ns2 outer shell explains similarity.

Question S-3. S: BiCl5 does not exist.
E: In Bi inert pair effect is predominant.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement: the 6s2 pair resists participation, so Bi(V) is unstable.

Teacher's Note: Inert pair effect stabilises the +3 state for heavy p-block elements.

Exam Note: Name the inert 6s2 pair.

Question S-4. S: Bond order for CO+ is more than bond order in CO whereas bond order in N2+ is less than N2 whereas both are isoelectronic.
E: Both have same bond order.

Solution.

Answer (from key): (b) S is wrong but E is correct. Corrected: the book keys (a). CO+ (13 electrons, bond order 2.5) has a lower bond order than CO (3), just like N2+ (2.5) against N2 (3), so S is wrong; E (N2 and CO both have bond order 3) is correct.

Teacher's Note: Both CO+ and N2+ lose a bonding electron: bond order 3 to 2.5.

Exam Note: Removing a bonding electron lowers bond order.

Question S-5. S: Bond order for N2+ and N2- are same but N2+ is more stable than N2-.
E: Antibonding electrons are more in N2-.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement: N2- carries more antibonding electrons than N2+.

Teacher's Note: Equal bond order: the species with fewer antibonding electrons is more stable.

Exam Note: Count antibonding electrons for each ion.

Question S-6. S: The bond angles in NO2+, NO2 and NO2- are 180°, 134° and 115° respectively.
E: Bond angles in a molecule also depends upon the presence of lone electron as well as lone pair of electron.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement: no electron, one lone electron and a lone pair on N give increasing repulsion and smaller angles.

Teacher's Note: Lone pair repels more than a single electron, so the angle shrinks.

Exam Note: Link angle to what sits on N.

Question S-7. S: Bond angle of PF3 > PCl3 but bond angle of PCl3 < PBr3.
E: The bond angles show an increase on decreasing electronegativity of attached other atom on central atom but in PF3 pπ–dπ bonding results in an increase in bond angle.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement, as keyed by the book. (Check: experimentally the angles are PF3 97.8° < PCl3 100.3° < PBr3 101°, so the printed statement and keyed answer should be verified by a teacher.)

Teacher's Note: Angle rises as the attached atom becomes less electronegative.

Exam Note: Quote the electronegativity trend for halides.

Question S-8. S: Although carbon in HCHO is sp2-hybridised and all the three bond angles are 120°C.
E: In HCHO, presence of multiple bond gives rise two bond angle. <HCO is 122° and <HCH is 116°.

Solution.

Answer (from key): (b) S is wrong but E is correct. It is a fact: the angles are not all 120° (∠HCO = 122°, ∠HCH = 116°) because the C=O bond repels more strongly.

Teacher's Note: The double bond occupies more space than a single bond.

Exam Note: Distinguish ideal sp2 from real angles.

Question S-9. S: N2O is represented by (i) N≡N→O and (ii) N=N=O but later is more stable.
E: The form II shows resonance.

Solution.

Answer (from key): (a) S is correct but E is wrong. Form II is more stable due to lesser formal charge on N-atom, per the key. (Check: the commonly accepted dominant forms of N2O are N≡N+—O- and N-=N+=O; the keyed answer is the book’s.)

Teacher's Note: Formal charges decide which structure is better.

Exam Note: Compare formal charges on each atom.

Question S-10. S: CS2 is linear whereas H2S is non-linear.
E: C in CS2 is sp-hybridized whereas S in H2S is sp3-hybridized.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: sp gives 180°; sp3 with two lone pairs gives a bent molecule.

Exam Note: Link hybridisation to shape.

Question S-11. S: Nitric oxide, though an odd electron molecule is diamagnetic in liquid state.
E: There occurs only partial dimerisation of NO to N2O2.

Solution.

Answer (from key): (b) S is wrong but E is correct. It is an experimental fact, per the key.

Teacher's Note: Dimerisation pairs the odd electrons, which reduces paramagnetism.

Exam Note: Dimerisation removes unpaired electrons.

Question S-12. S: All the Al—Cl bonds in Al2Cl6 are equivalent.
E: The terminal Al—Cl bonds are different from bridge Al—Cl bonds.

Solution.

Answer (from key): (b) S is wrong but E is correct. Al2Cl6 has two bridging Cl atoms and four terminal Cl atoms, so the bonds are not all equivalent: S is wrong and E is correct.

Teacher's Note: Bridge bonds are longer than terminal bonds.

Exam Note: Two types of Al–Cl bond exist.

Question S-13. S: Bond dissociation energy of F2 is lesser than Cl2.
E: An additional π-bond formation between Cl—Cl in Cl2 in which an unshared electron of one Cl-atom overlaps with a free 3d-orbital electron of another Cl-atom.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement, as keyed by the book.

Teacher's Note: F–F is weak (158 kJ/mol) while Cl–Cl is 242 kJ/mol.

Exam Note: Quote both bond energies.

Question S-14. S: LiCl is predominantly a covalent compound.
E: Electronegativity difference between Li and Cl is too small.

Solution.

Answer (from key): (a) S is correct but E is wrong. LiCl is covalent due to the high polarising power of Li+; the electronegativity difference is not too small, so E is wrong.

Teacher's Note: Small Li+ polarises Cl- (Fajans).

Exam Note: Cite polarising power, not electronegativity.

Question S-15. S: The electronic structure of O3 is as drawn in the book (O3 with a positive charge on the central O and a negative charge on one terminal O).
E: The alternative structure drawn in the book for O3 is not allowed.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. Both are correct, per the key; the second structure is not a valid octet structure but does not explain the first.

Teacher's Note: O3 is a resonance hybrid of two charge-separated forms.

Exam Note: Give the accepted resonance forms of ozone.

Question S-16. S: Sulphate is estimated as BaSO4 and not as MgSO4.
E: Ionic radius of Mg2+ is smaller than that of Ba2+.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. BaSO4 is insoluble while MgSO4 is soluble; both statements are correct but the radius difference alone is not the explanation.

Teacher's Note: Insolubility of BaSO4 lets it be filtered and weighed.

Exam Note: Gravimetric analysis needs an insoluble precipitate.

Question S-17. S: Helium and Beryllium have similar outer electronic configuration.
E: Both are chemically inert.

Solution.

Answer (from key): (a) S is correct but E is wrong. S is correct (both ns2); E is wrong because Be is a reactive metal.

Teacher's Note: He is 1s2, Be is 2s2; only He is inert.

Exam Note: Be forms many compounds.

Question S-18. S: The size decreases as Pb > Pb2+ > Pb4+.
E: The nuclear charge/electron increases, i.e., the force of attraction towards nucleus increases.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Losing electrons raises Z/e, shrinking the ion.

Exam Note: Link cation charge to size.

Question S-19. S: The S—S—S bond angle in S8 molecule is 105°.
E: S8 has V-shape.

Solution.

Answer (from key): (a) S is correct but E is wrong. S is correct (about 105°); E is wrong because S8 has a puckered crown (ring) structure.

Teacher's Note: Ring of eight S atoms, each bent at about 105°.

Exam Note: S8 is a crown, not V-shaped.

Question S-20. S: O—O bond length in H2O2 is shorter than that of O2F2.
E: H2O2 is a covalent compound.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: the O—O bond in H2O2 (about 148 pm) is longer than in O2F2 (about 122 pm); E is correct.

Teacher's Note: O2F2 has a near double O–O bond.

Exam Note: Compare O–O bond orders.

Question S-21. S: Fluorine molecule has bond order one.
E: The number of electrons in antibonding molecular orbitals is two less than in bonding molecular orbitals.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement: F2 has 8 bonding and 6 antibonding electrons, so bond order = (8 − 6)/2 = 1.

Teacher's Note: Bond order = (bonding − antibonding)/2.

Exam Note: Count 8 bonding and 6 antibonding.

Question S-22. S: The dipole moment helps to predict whether a molecule is polar or non-polar.
E: The dipole moment helps to predict the geometry of molecules.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: μ = 0 means symmetrical (non-polar), μ ≠ 0 indicates polar.

Exam Note: Dipole moment hints at symmetry.

Question S-23. S: All F—S—F bond angles in SF4 are greater than 90° but lesser than 180°.
E: The lone pair-bond pair repulsion is weaker than bond pair-bond pair repulsion.

Solution.

Answer (from key): (a) S is correct but E is wrong. Per the key (SF4 is sp3d with angles near 116°). (Check: in SF4 the axial angle is about 173° and the equatorial angle about 102°, and lone pair–bond pair repulsion is stronger than bond pair–bond pair repulsion; a teacher should verify this keyed answer.)

Teacher's Note: Lone pair repulsion distorts the trigonal bipyramid.

Exam Note: Axial F–S–F is about 173°.

Question S-24. S: N2 and NO+ both are diamagnetic substances.
E: NO+ is isoelectronic with N2.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Corrected: the book keys (d). Both are 14-electron species with all electrons paired, and E is the correct explanation (isoelectronic species have the same MO configuration), so (c).

Teacher's Note: Same electron count gives the same magnetic behaviour.

Exam Note: Isoelectronic species share magnetism.

Question S-25. S: The bond angle of PBr3 is greater than PH3 but bond angle of NBr3 is lesser than NH3.
E: Electronegativity of P-atom is less than that of N-atom.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. Both statements are correct, but the electronegativity of P is not the real explanation of this angle trend.

Teacher's Note: Angle trends depend on central-atom size and substituent electronegativity together.

Exam Note: Both correct, no causal link.

Question S-26. S: CaF2 is soluble in water but CaI2 not.
E: CaF2 is more ionic than CaI2.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: CaF2 is insoluble in water because of its high lattice energy (small F-), while CaI2 is soluble; E is correct.

Teacher's Note: Small F- gives very high lattice energy.

Exam Note: CaF2 is insoluble; CaI2 dissolves.

Question S-27. S: O3 and NO2- are isoelectronic.
E: Bond angles of O3 and NO2- are 116.8° and 115° respectively.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. Both are correct (18 valence electrons each; angles 116.8° and 115°) but the angle difference is due to lone pair–bond pair repulsion in O3 and lone electron-bond pair repulsion in NO2-, not an explanation of being isoelectronic.

Teacher's Note: Both are bent with one lone pair on the central atom.

Exam Note: Isoelectronic does not explain angle values.

Question S-28. S: NO2 is readily dimerised to N2O4.
E: NO2 has one unpaired electron and two such molecules with opposite spin form bond between two N-atoms readily.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Since the process does not require any rearrangement, the energy of activation for dimerisation of NO2 is low.

Teacher's Note: Two odd electrons pair up to give an N–N bond.

Exam Note: Odd-electron NO2 dimerises readily.

Question S-29. S: Both Cu+ and Na+ have almost same radii.
E: Cu+ possesses more power to polarise an anion.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. Both are correct (rCu+ = 0.96 Å, rNa+ = 0.95 Å); the greater polarising power of Cu+ is due to its pseudo noble gas configuration, not the equal radii.

Teacher's Note: 18-electron core shields poorly, so Cu+ polarises more.

Exam Note: Equal radii, unequal polarising power.

Question S-30. S: IE1 for He is maximum and EA1 for Cl is more than EA1 of F.
E: He possesses paired electrons in 1s sub-shell, closest to nucleus, whereas EA1 of Cl is maximum which exerts more electron-electron repulsion in F.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Small F has strong inter-electronic repulsion in 2p.

Exam Note: Closed 1s2 of He is hard to ionise.

Question S-31. S: If difference of electronegativity between two atoms is zero the resultant molecule will be non-polar covalent.
E: The shared pair of electron lies just in the middle of two atoms.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Equal pull gives no charge separation.

Exam Note: Identical atoms share equally.

Question S-32. S: p-Dimethoxy benzene is polar molecule.
E: The two methoxy groups at para positions located as shown in the book (the two CH3 groups on the same side).

Solution.

Answer (from key): (a) S is correct but E is wrong. p-Dimethoxybenzene is polar due to the orientation of the CH3 groups, as the resultant vector is not zero.

Teacher's Note: Methoxy orientation breaks the para symmetry.

Exam Note: Para does not always mean zero dipole.

Question S-33. S: The lattice energy of silver halides is AgF > AgCl > AgBr > AgI.
E: AgF is water soluble.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. Inspite of higher value of lattice energy AgF is soluble because F- is extensively hydrated and the heat of hydration predominates over lattice energy.

Teacher's Note: Hydration energy outweighs lattice energy for AgF.

Exam Note: Both facts hold; one does not cause the other.

Question S-34. S: The molecule cis-1-chloropropene is more polar than trans-1-chloropropene.
E: The magnitude of resultant vector in trans-1-chloropropene is non-zero.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: both forms are polar, and the trans form is more polar due to the higher value of dipole moment from the additive nature of CH3 and Cl vectors; E is correct.

Teacher's Note: In trans the CH3 and Cl moments add.

Exam Note: Cis vectors partly oppose.

Question S-35. S: IF7 is super octet molecule.
E: Central atom of I in IF7 has 14 electrons.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Seven bond pairs give 14 electrons on I.

Exam Note: Count bond-pair electrons.

Question S-36. S: FeCl2 is more covalent than FeCl3 because electronegativity of Fe3+ > Fe2+.
E: Higher is the charge on cation, more is deformation of anion, more is covalent character.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: this is Fajans’ rule, FeCl3 is more covalent than FeCl2 since Fe3+ has higher charge; E is correct.

Teacher's Note: Higher cation charge polarises the anion more.

Exam Note: FeCl3 is the more covalent chloride.

Question S-37. S: MO configuration of CO is σ1s2, σ*1s2, σ2s2, σ2pz2, π2px2, π2py2, σ*2s2.
E: The bond energy level σ*2s2 possesses higher energy because then only bond length order for CO (more) and CO+ (less) can be explained.

Solution.

Answer (from key): (a) S is correct but E is wrong. Corrected: the book keys (c). The S configuration has the correct 14 electrons (CO is isoelectronic with N2), but the explanation is wrong because in CO the σ*2s level lies below the π2p and σ2p levels, and CO+ (bond order 2.5) is not stronger than CO (bond order 3).

Teacher's Note: In CO, σ*2s is below π2p and σ2p.

Exam Note: Order of N2-type MOs: σ2s, σ*2s, π2p, σ2p.

Question S-38. S: The dipole moment of NH3 is less than NF3.
E: The lone pair present on N shows additive nature to N—H vector whereas it is subtractive to N—F vector.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: μ(NH3) = 1.47 D is greater than μ(NF3) = 0.24 D, because the lone-pair moment adds to the N—H bond moments and opposes the N—F moments; E is correct.

Teacher's Note: Bond dipoles reverse direction between N–H and N–F.

Exam Note: Lone pair direction matters.

Question S-39. S: The bond energy of P—Cl bond in PCl3 and PCl5 are different.
E: In PCl3, sp3–p overlapping whereas in PCl5, sp3d–p overlapping is noticed.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Different hybrid orbitals give different bond strengths.

Exam Note: Hybridisation changes bond energy.

Question S-40. S: SF4 has lone pair of electron at equatorial position in preference to apical position in the overall trigonal bipyramidal geometry.
E: If lone pair is at equatorial position then only repulsion is minimum.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement: an equatorial lone pair has fewer 90° repulsions (two) than an axial one (three).

Teacher's Note: Lone pair takes the roomier equatorial site.

Exam Note: Count 90° interactions for each position.

Question S-41. S: BF3 molecule is planar with an angle of 120°C.
E: BF3 has bond pair-lone pair electron ratio 1 : 3.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. BF3 is planar due to sp2-hybridisation; the ratio 1:3 (three bond pairs on boron and nine lone pairs on F atoms) is true but does not explain the planar shape.

Teacher's Note: Planarity follows from three bond pairs on B.

Exam Note: True statement does not explain the shape.

Question S-42. S: N and P show a maximum covalency of five.
E: P can expand the outer shell of electrons beyond an octet by involving d-orbitals present in its valence shell.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: N shows a maximum covalency of +3 along with one coordinate bond (four), whereas P shows a maximum covalency of +5 due to the given explanation (E correct).

Teacher's Note: N has no d-orbitals.

Exam Note: Nitrogen cannot expand its octet.

Question S-43. S: All molecules with polar bond have dipole moment.
E: Dipole moment is a vector quantity.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: molecules having polar bonds may or may not (e.g., BF3) have dipole moment, as the resultant vector sum decides the net dipole moment; E is correct.

Teacher's Note: Symmetric molecules cancel polar bonds.

Exam Note: Net vector sum is what counts.

Question S-44. S: PCl5 conducts current in solid state.
E: PCl5 exists as [PCl4]+ and [PCl6]- ions.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: solid ionic compounds conduct current only in the fused state (or solution), not in the solid state; E is correct (PCl5 in the solid state exists as [PCl6]- [PCl4]+).

Teacher's Note: Ions in a rigid lattice cannot move.

Exam Note: Solid ionic lattices do not conduct.

Question S-45. S: EA2 for halogens is endothermic.
E: Halogens have ns2np5 configuration and can accommodate only one electron.

Solution.

Answer (from key): (b) S is wrong but E is correct. Halogens can have only EA1 value because they can accommodate only one electron (ns2np5 to ns2np6); there is no scope for further addition, thus EA2 for halogens is zero (E correct, S wrong).

Teacher's Note: Halide ion has a closed octet.

Exam Note: EA2 of halogens is not defined.

Question S-46. S: F atom has less electron affinity than Cl atom.
E: Additional electrons are repelled more effectively by 3p-electrons in Cl atom than by 2p-electrons in F atom.

Solution.

Answer (from key): (a) S is correct but E is wrong. S is correct; E is wrong: the electron affinity of F is less than that of Cl due to more 2p-electron repulsion in the small F atom.

Teacher's Note: Compact 2p subshell causes strong repulsion in F.

Exam Note: 2p electrons repel more than 3p.

Question S-47. S: The ionisation energy of 1H2 is more than ionisation energy of 1H1.
E: This is due to isotopic effect.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Heavier isotope has slightly higher IE (reduced mass effect).

Exam Note: Isotopic effect on ionisation energy.

Question S-48. S: Solubility of NaOH in water increases with rise in temperature, although it is exothermic dissolution.
E: Changes showing exothermic nature occurs in backward direction if temperature is raised.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. The assertion is an experimental fact observed against Le Chatelier principle; both statements are correct but E does not explain S.

Teacher's Note: Exothermic dissolution should decrease with temperature by Le Chatelier.

Exam Note: NaOH is an exception.

Question S-49. S: Solubility of NaCl in D2O is less than in H2O.
E: Higher viscosity of D2O is responsible for low solubility of NaCl.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement, as keyed by the book.

Teacher's Note: D2O is more strongly associated than H2O.

Exam Note: Heavy water dissolves salts less.

Question S-50. S: NH3 and CH3- both have pyramidal shape.
E: N in NH3 and C in CH3- both have sp3-hybridisation with one lone pair of electron on each.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Explanation is correct reason for statement.

Teacher's Note: Three bonds and one lone pair give a pyramid.

Exam Note: Isoelectronic, isostructural pair.

Question S-51. S: The bond angle in H2O is greater than H2S.
E: H-bonding does not occur in H2S due to low electronegativity of S.

Solution.

Answer (from key): (d) Both S and E are correct but E is not the correct explanation of S. The bond angle in H2S is smaller because S atom has bigger size than O (and the less electronegative S pulls bond pairs less to itself); E is true but is not the reason.

Teacher's Note: H–S bond pairs are farther from S, so less repulsion between them.

Exam Note: Angle trend follows electronegativity of the central atom.

Question S-52. S: The bond angle in BF3 is smaller than that in BF4-.
E: BF3 has sp2-hybridisation, whereas BF4- has sp3.

Solution.

Answer (from key): (b) S is wrong but E is correct. S is wrong: in sp2-hybridisation the bond angle is 120°, while in sp3 it is 109°28′, so BF3 has the larger angle; E is correct.

Teacher's Note: sp2 gives 120°, sp3 gives 109.5°.

Exam Note: BF3 angle exceeds BF4-.

Question S-53. S: The first ionisation energy of N is greater than O.
E: N atom has half filled p-orbitals.

Solution.

Answer (from key): (c) Both S and E are correct and E is the correct explanation of S. Removal of electron from N requires more energy due to the half-filled p-orbital in N atom.

Teacher's Note: Half-filled 2p3 is extra stable.

Exam Note: Exception to the period trend.

Question S-54. S: The first ionisation energy of Be is greater than that of B. (IIT 2000)
E: 2p-orbital is lower in energy than 2s-orbital.

Solution.

Answer (from key): (a) S is correct but E is wrong. S is correct; E is wrong, since the energy level of 2s is lower than 2p, so a 2s electron of Be is held more tightly.

Teacher's Note: Filled 2s of Be is lower in energy than 2p of B.

Exam Note: 2s is below 2p in a multi-electron atom.

Matching Type Problems

Type I: Only One Match Are Possible

Question T-1. List A: (A) Melting point, (B) Thermal stability, (C) Polarisability, (D) Electron affinity.
List B: (i) O2- < O- < O < O+, (ii) F- < Cl- < Br- < I-, (iii) HI < HBr < HCl < HF, (iv) XeF6 < XeF4 < XeF2.

Solution.

Answer (from key): A – iv; B – iii; C – ii; D – i.

Melting points: XeF6 (49°C) < XeF4 (117°C) < XeF2 (129°C); thermal stability of HX falls from HF to HI; polarisability rises with anion size; electron affinity rises from O2- to O+.

Teacher's Note: Match each property with its trend: size, bond strength and charge decide the order.

Exam Note: Match each property with its trend; write all four pairs.

Question T-2. List A: (A) SO2Cl2, (B) Ice, (C) CuSO4 (anhy.), (D) K2HgI4 + NaOH, (E) Fluorocarbons, (F) NO.
List B: (i) Paramagnetic, (ii) Refrigerant, (iii) Testing NH3, (iv) Testing H2O, (v) H-bonding, (vi) Tetrahedral.

Solution.

Answer (from key): A – (vi); B – (v); C – (iv); D – (iii); E – (ii); F – (i).

SO2Cl2 is tetrahedral; ice has H-bonding; anhydrous CuSO4 turns blue with water; Nessler’s reagent (K2HgI4 + NaOH) tests NH3; fluorocarbons are refrigerants; NO is paramagnetic.

Teacher's Note: Link each substance with its characteristic use or structure.

Exam Note: Write all six pairs correctly.

Type II: More Than One Match Are Possible

Question T-3. List A: (A) B2, (B) N2, (C) O2-, (D) O2.
List B: (p) Paramagnetic, (q) Undergoes oxidation, (r) Undergoes reduction, (s) Bond order ≥ 2, (t) Mixing of s and p-orbitals. [IIT 2009]

Solution.

Answer (from key): A – p, q, r, t; B – q, r, s, t; C – p, q, r, t; D – p, q, r, s, t.

Corrected: s–p mixing (t) does not occur in O2 and O2- (their σ2p lies below π2p), so the corrected matches are C – p, q, r and D – p, q, r, s; B2 (paramagnetic, bond order 1, s–p mixing) A – p, q, r, t and N2 (diamagnetic, bond order 3, s–p mixing) B – q, r, s, t stand.

Teacher's Note: Fill each MO diagram: unpaired electrons, bond order and whether s–p mixing reorders σ2p and π2p.

Exam Note: Check paramagnetism, bond order and mixing for each.

Question T-4. List A: (A) sp3-hybridisation, (B) Lone pair effect, (C) Heteromolecular species, (D) Paramagnetism, (E) Dipole moment, (F) H-bonding.
List B: 1. NH3, 2. Diethyl ether, 3. H2O, 4. N2O, 5. O2, 6. N2-.

Solution.

Answer (from key): A – 1, 2, 3; B – 1, 2, 3; C – 1, 2, 3, 4; D – 5, 6; E – 1, 2, 3, 4; F – 1, 3.

Corrected: the book keys D – 4, 5, 6, but N2O is diamagnetic; only O2 and N2- (odd electron) are paramagnetic.

Teacher's Note: Test each species for the property: hybridisation, lone pair, polarity, unpaired electrons, H on N/O/F.

Exam Note: Diamagnetic N2O must be excluded from D.

Type III: Only One Match From Each List

Question T-5. List A: A. See-saw, B. T-shaped, C. Linear, D. Ratio of probable density of electron at r = a0 and r = 0, E. Ratio of probable density of electron at r = 2a0 and r = 0.
List B: 1. I3-, 2. e-2, 3. IF4+, 4. XeOF2, 5. e-4.
List C: a. ClF3, b. CS2, c. 0.14, d. 0.018, e. SF4.

Solution.

Answer (from key): A – 3 – e; B – 4 – a; C – 1 – b; D – 2 – c; E – 5 – d.

IF4+ and SF4 are see-saw; XeOF2 and ClF3 are T-shaped; I3- and CS2 are linear; for the 1s orbital the density ratio is e-2r/a0, i.e. e-2 = 0.135 ≈ 0.14 at r = a0 and e-4 = 0.018 at r = 2a0.

Teacher's Note: Match isostructural species and evaluate e-2r/a0 for the hydrogen 1s density.

Exam Note: Compute e-2 = 0.135 and e-4 = 0.018.

Question T-6. List A: A. Electrovalent bonding, B. Covalent bonding, C. Singlet linkage, D. Co-ordinate bonding, E. Valence bond theory, F. Molecular orbital theory.
List B: a. Kossel and Lewis, b. Lewis, c. Sugden, d. Menzies, e. Heitler and London, f. Hund-Mulliken.
List C: 1. Ions, 2. Polarity, 3. One sided sharing of ‘e’, 4. One sided sharing of ‘e’ pair, 5. Hybridization, 6. Paramagnetism.

Solution.

Answer (from key): A – a – 1; B – b – 2; C – c – 3; D – d – 4; E – e – 5; F – f – 6.

Teacher's Note: Pair each bonding concept with its proposer and key idea.

Exam Note: Memorise the proposers of each bond concept.

Question T-7. List A: A. PCl5, B. BeCl2, C. NH3, D. XeF4, E. XeF6.
List B: a. sp3d, b. sp, c. sp3, d. sp3d2, e. sp3d3.
List C: 1. Linear, 2. Trigonal bipyramids, 3. Pyramidal, 4. Square planar, 5. Pentagonal pyramidal.

Solution.

Answer (from key): A – a – 2; B – b – 1; C – c – 3; D – d – 4; E – e – 5.

Teacher's Note: Steric number fixes hybridisation; add lone pairs to get the shape.

Exam Note: Give hybridisation and shape for each.

Question T-8. List A: A. XeF4, B. HgCl2, C. I3-, D. NO2-, E. ClO4-, F. XeOF2, G. ICl4-, H. ICl2-, I. TeCl4.
List B: 1. sp3d2, 2. sp3d, 3. sp, 4. sp2, 5. sp3.
List C: a. V-shaped, b. See-saw, c. T-shaped, d. Tetrahedral, e. Linear, f. Square planar.

Solution.

Answer (from key): A – 1 – f; B – 3 – e; C – 2 – e; D – 4 – a; E – 5 – d; F – 2 – c; G – 1 – f; H – 2 – e; I – 2 – b.

XeF4 and ICl4-: sp3d2, square planar; HgCl2: sp, linear; I3- and ICl2-: sp3d, linear; NO2-: sp2, V-shaped; ClO4-: sp3, tetrahedral; XeOF2: sp3d, T-shaped; TeCl4: sp3d, see-saw.

Teacher's Note: Count bond pairs and lone pairs to get hybridisation, then the shape from lone-pair positions.

Exam Note: Write hybridisation and shape for each species.

Step-by-Step P Bahadur Solutions for JEE Math

Access JEE Mathematics Solutions

Review detailed solutions for JEE Mathematics. The P Bahadur Solutions Numerical Chemistry Chapter 5 Periodic Properties Chemical Bonding Complexes PDF provides comprehensive answers mapped to standard P Bahadur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Next Steps in Your Mathematics Revision

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.