OP Tandon Solutions Physical Chemistry IIT JEE Chapter 5 Solutions General Colligative Properties Part 1

Step-by-Step OP Tandon Solutions for JEE Chemistry Chapter 05 Solutions General Colligative Properties

Access comprehensive textbook solutions for Chapter 05 Solutions General Colligative Properties using the OP Tandon reference material for JEE Chemistry. Designed to align with the 2026 academic curriculum, these detailed answers help students reinforce core academic concepts and master complex problem-solving methods.

Download Chapter 05 Solutions General Colligative Properties Textbook Solutions PDF

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 5 Solutions (General and Colligative Properties) - Part 1

Some Solved Examples

Question Example 1. Calculate the masses of cane sugar and water required to prepare 250 g of 25% cane sugar solution.

Solution. Mass percentage = (mass of solute / mass of solution) × 100, so 25 = (mass of cane sugar / 250) × 100.
Mass of cane sugar = (25 × 250)/100 = 62.5 g
Mass of water = 250 − 62.5 = 187.5 g

Teacher's Note: Mass percent is solute mass over total solution mass, so water is the difference.

Exam Note: Show formula, then both masses with units.

Question Example 2. Calculate the molarity of the following solutions: (a) 4 g of caustic soda is dissolved in 200 mL of the solution. (b) 5.3 g of anhydrous sodium carbonate is dissolved in 100 mL of solution. (c) 0.365 g of pure HCl gas is dissolved in 50 mL of solution.

Solution. (a) Molar mass of NaOH = 40; moles = 4/40 = 0.1; volume = 200/1000 = 0.2 L; molarity = 0.1/0.2 = 0.5 M.
(b) Molar mass of Na2CO3 = 106; moles = 5.3/106 = 0.05; volume = 0.1 L; molarity = 0.05/0.1 = 0.5 M.
(c) Molar mass of HCl = 36.5; moles = 0.365/36.5 = 0.01; volume = 50/1000 = 0.05 L; molarity = 0.01/0.05 = 0.2 M.

Teacher's Note: Convert mL to litres before dividing moles by volume.

Exam Note: Write moles, volume in L, then molarity.

Question Example 3. The density of a solution containing 13% by mass of sulphuric acid is 1.09 g/mL. Calculate the molarity and normality of the solution.

Solution. Volume of 100 g solution = 100/1.09 mL = 100/(1.09 × 1000) L = 1/(1.09 × 10) L.
Moles of H2SO4 in 100 g solution = 13/98.
Molarity = (13/98) × (1.09 × 10)/1 = 1.445 M
Note: Molarity = (% strength × density × 10)/(mol. mass); Normality = (% strength × density × 10)/(eq. mass).
Normality = Molarity × n = 1.445 × 2 = 2.89 N (n = 98/49 = 2).

Teacher's Note: Use M = (% × d × 10)/molar mass; normality = molarity × basicity (2 for H2SO4).

Exam Note: Quote the shortcut formula and n = 2 for full marks.

Question Example 4. Calculate the molarity of pure water (d = 1 g/mL).

Solution. Consider 1000 mL of water. Mass = 1000 × 1 = 1000 g.
Moles of water = 1000/18 = 55.5
Molarity = moles / volume in litres = 55.5/1 = 55.5 M

Teacher's Note: Pure water has fixed concentration; 1 L weighs 1000 g, so moles = 1000/18.

Exam Note: State 55.5 M; commonly asked fact.

Question Example 5. Calculate the quantity of sodium carbonate (anhydrous) required to prepare 250 mL of M/10 solution.

Solution. Molarity = w/(M × V), where w = mass of Na2CO3 in g, M = molar mass = 106, V = 250/1000 = 0.25 L.
Molarity = 1/10, so 1/10 = w/(106 × 0.25)
w = (106 × 0.25)/10 = 2.65 g

Teacher's Note: Rearrange molarity = w/(M·V) for mass; volume must be in litres.

Exam Note: Give 2.65 g with substitution shown.

Question Example 6. 214.2 g of sugar syrup contains 34.2 g of sugar. Calculate (i) molality of the solution and (ii) mole fraction of sugar in the syrup.

Solution. (i) Moles of sugar = 34.2/342 = 0.1. Mass of water = 214.2 − 34.2 = 180 g = 180/1000 kg. Moles of water = 180/18 = 10.
Molality = 0.1/(180/1000) = 0.555 m
(ii) Total moles = 10.0 + 0.1 = 10.1; mole fraction of sugar = 0.1/10.1 = 0.0099

Teacher's Note: Molality uses kg of solvent, not solution; subtract solute from syrup mass first.

Exam Note: Marks: solvent mass, molality, then mole fraction.

Question Example 7. A solution contains 410.3 g of H2SO4 per litre of solution at 20°C. If the density is 1.243 g/mL, what will be its molarity and molality?

Solution. Molar mass of H2SO4 = 98. Moles = 410.3/98 = 4.186.
Molarity = 4.186/1 = 4.186 M
Mass of 1 litre solution = 1000 × 1.243 = 1243 g; mass of water = 1243 − 410.3 = 832.7 g = 832.7/1000 kg.
Molality = (4.186/832.7) × 1000 = 5.027 m

Teacher's Note: Molarity is per litre of solution; molality needs density to get solvent mass.

Exam Note: Find solvent mass from density; then molality.

Question Example 8. The density of a 2.03 M solution of acetic acid (molecular mass 60) in water is 1.017 g/mL. Calculate the molality of the solution.

Solution. Strength = molarity × mol. mass = 2.03 × 60 = 121.8 g/L.
Mass of 1 litre solution = 1000 × 1.017 = 1017 g.
Mass of water = 1017 − 121.8 = 895.2 g = 895.2/1000 kg.
Molality = (2.03/895.2) × 1000 = 2.267 m

Teacher's Note: Convert molarity to g/L, subtract from solution mass to get water.

Exam Note: Always divide moles by kg of water.

Question Example 9. The density of a 3 M sodium thiosulphate (Na2S2O3) solution is 1.25 g/mL. Calculate (i) the percentage by mass of sodium thiosulphate, (ii) the mole fraction of sodium thiosulphate and (iii) molalities of Na+ and S2O32− ions.

Solution. (i) Mass of 1000 mL solution = 1.25 × 1000 = 1250 g. Mass of Na2S2O3 in 1000 mL of 3 M solution = 3 × 158 = 474 g.
Mass percentage = (474/1250) × 100 = 37.92
Alternatively, M = (x × d × 10)/mB: 3 = (x × 1.25 × 10)/158, so x = 37.92.
(ii) Moles of Na2S2O3 = 474/158 = 3. Mass of water = 1250 − 474 = 776 g; moles of water = 776/18 = 43.1.
Mole fraction of Na2S2O3 = 3/(43.1 + 3) = 3/46.1 = 0.065
(iii) Moles of Na+ = 2 × 3 = 6; molality of Na+ = (6/776) × 1000 = 7.73 m.
Moles of S2O32− = 3; molality = (3/776) × 1000 = 3.86 m

Teacher's Note: Each Na2S2O3 gives 2 Na+ and 1 S2O32−; ion molality follows stoichiometry.

Exam Note: Mention ion ratio 2:1 when finding ion molalities.

Question Example 10. A solution is prepared by dissolving 5.64 g of glucose in 60 g of water. Calculate the following: (i) mass per cent of glucose and water, (ii) molality of the solution, (iii) mole fraction of glucose and water.

Solution. (i) Total mass = 5.64 + 60 = 65.64 g. Mass per cent of glucose = (5.64/65.64) × 100 = 8.59%; of water = 100 − 8.59 = 91.41%.
(ii) Moles of glucose = 5.64/180; mass of water = 60/1000 kg. Molality = (5.64/180) × (1000/60) = 0.522 m.
(iii) Moles of glucose = 5.64/180 = 0.0313; moles of water = 60/18 = 3.333.
Mole fraction of glucose = 0.0313/(3.333 + 0.0313) = 0.0093; of water = 3.333/(3.333 + 0.0313) = 0.9907

Teacher's Note: Mole fractions of all components sum to 1, a quick check.

Exam Note: Verify xA + xB = 1 in the answer.

Question Example 11. What would be the molality of a solution made by mixing equal volumes of 30.0% by mass of H2SO4 (density 1.218 g cm−3) and 70% by mass of H2SO4 (density 1.610 g cm−3)?

Solution. Let 100 mL of one solution be mixed with 100 mL of the other.
Mass of 100 mL of 30% H2SO4 = 100 × 1.218 = 121.8 g; H2SO4 in it = (30/100) × 121.8 g = 36.54 g; water = 121.8 − 36.54 = 85.26 g.
Mass of 100 mL of 70% H2SO4 = 100 × 1.61 = 161.0 g; H2SO4 in it = (70/100) × 161.0 = 112.7 g; water = 161.0 − 112.7 = 48.30 g.
Total H2SO4 = 36.54 + 112.7 = 149.24 g; moles = 149.24/98.
Total water = 85.26 + 48.30 = 133.56 g = 133.56/1000 kg.
Molality = (149.24/98) × (1000/133.56) = 11.4 m

Teacher's Note: Add solute and solvent masses separately; densities convert volumes to masses.

Exam Note: Do not add percentages; add masses.

Question Example 12. The mole fraction of CH3OH in an aqueous solution is 0.02 and its density is 0.994 g cm−3. Determine its molarity and molality.

Solution. Let x mole of CH3OH and y mole of water be present. x/(x + y) = 0.02, so y/x = 49 or x/y = 1/49.
Molality = (x/(18 × y)) × 1000 = 1000/(18 × 49) = 1.13 m.
Volume of solution = (32x + 18y)/0.994 mL = (32x + 18y)/(0.994 × 1000) litre = (32x + 18y)/994 litre.
Molarity = x/(32x + 18y) × 994 = 994/(32 + 18 × y/x) = 994/(32 + 18 × 49) = 1.0875 M

Teacher's Note: Take ratio y/x = 49 from the mole fraction; both x and y cancel.

Exam Note: Ratio method avoids assuming a basis amount.

Question Example 13. Calculate the concentration of NaOH in g/mL, which has the same normality as that of a solution of HCl of concentration 0.04 g/mL.

Solution. NHCl = (wB × 1000)/(EB × V) = (0.04 × 1000)/(36.5 × 1) = 1.095.
NNaOH = NHCl, so 1.095 = (wB × 1000)/(40 × 1).
wB = 0.0438 g/mL

Teacher's Note: Equal normality means equal equivalents per litre; equivalent weights differ.

Exam Note: Use E = 36.5 for HCl and 40 for NaOH.

Question Example 14. How many Na+ ions are present in 50 mL of a 0.5 M solution of NaCl?

Solution. Number of moles of NaCl = MV/1000 = (0.5 × 50)/1000 = 0.025.
NaCl → Na+ + Cl−, so moles of Na+ = 0.025.
Number of Na+ ions = 0.025 × 6.023 × 1023 = 1.505 × 1022

Teacher's Note: Moles times Avogadro number gives ions; NaCl gives one Na+ per formula unit.

Exam Note: Write moles first, then multiply by NA.

Question Example 15. Reaction, 2Br−(aq) + Cl2(aq) → 2Cl−(aq) + Br2(aq), is used for commercial preparation of bromine from its salts. Suppose we have 50 mL of a 0.06 M solution of NaBr. What volume of a 0.05 M solution of Cl2 is needed to react completely with the Br−?

Solution. 2Br−(aq) + Cl2(aq) → 2Cl−(aq) + Br2(aq)
M1V1(Br−)/n1 = M2V2(Cl2)/n2, where n1 and n2 are the corresponding coefficients.
(0.06 × 50)/2 = (0.05 × V2)/1
V2 = 30 mL

Teacher's Note: Divide each M·V by its stoichiometric coefficient before equating.

Exam Note: Coefficients 2 and 1 decide the ratio.

Question Example 16. Calculate the molarity, molality and mole fraction of ethyl alcohol in a solution of total volume 95 mL prepared by adding 50 mL of ethyl alcohol (density 0.789 mL−1) to 50 mL water (density 1.00 g mL−1).

Solution. Moles of ethyl alcohol = (50 × 0.789)/46 = 0.8576. Moles of water = (50 × 1)/18 = 2.7777.
Molarity = (0.8576/95) × 1000 = 9.027 M
Molality = (0.8576/50) × 1000 = 17.15 m (mass of solvent = 50 g)
Mole fraction = 0.8576/(0.8576 + 2.7777) = 0.8576/3.6353 = 0.236

Teacher's Note: Volumes are not additive here: molarity uses the stated 95 mL final volume.

Exam Note: Use 95 mL for molarity, 50 g water for molality.

Question Example 17. Calculate the concentration of CO2 in a soft drink that is bottled at partial pressure of CO2 of 4 atm over the liquid at 25°C. The Henry's Law constant for CO2 in water at 25°C is 3.1 × 10−2 mol/litre-atm.

Solution. According to Henry's Law: S = KP = 3.1 × 10−2 × 4 = 0.12 mol litre−1

Teacher's Note: Henry's law: solubility is directly proportional to partial pressure; K has units mol/litre-atm.

Exam Note: Check that K and P units cancel to mol/L.

Question Example 18. The partial pressure of ethane over a saturated solution containing 6.56 × 10−2 g of ethane is 1 bar. If the solution contains 5 × 10−2 g of ethane, then what shall be the partial pressure of the gas?

Solution. S1/S2 = P1/P2
(6.56 × 10−2)/(5 × 10−2) = 1/P2
P2 = 0.762 bar

Teacher's Note: Same gas and temperature, so solubility ratio equals pressure ratio.

Exam Note: Keep P1 in the numerator of the ratio correctly.

Illustrations of Objective Questions

Question Illustration 1. 0.5 M H2SO4 is diluted from 1 litre to 10 litres, normality of the resulting solution is: (AFMC 2005)
(a) 1 N
(b) 0.1 N
(c) 10 N
(d) 11 N

Solution. Answer: (b)
M1V1 = M2V2: 0.5 × 1 = M2 × 10, so M2 = 0.05. N = M × basicity of acid = 0.05 × 2 = 0.1 N.

Teacher's Note: Dilute molarity first, then multiply by basicity 2 to get normality.

Exam Note: Don't forget the factor 2 for H2SO4.

Question Illustration 2. Molar solution means 1 mole of solute present in: (BCECE (Medical) 2005)
(a) 1000 g of solvent
(b) 1 litre of solvent
(c) 1 litre of solution
(d) 1000 g of solution

Solution. Answer: (c)
Molarity is defined as moles of solute per litre of solution.

Teacher's Note: Molarity is per litre of solution; molality is per kg of solvent.

Exam Note: Common trap: confusing it with molal.

Question Illustration 3. The molarity of a solution containing 50 g of NaCl in 500 g of a solution and having a density of 0.936 g/cm3 is:
(a) 1.5 M
(b) 1.6 M
(c) 1.8 M
(d) 1.2 M

Solution. Answer: (b)
M = (x × d × 10)/mB, where x = (50/500) × 100 = 10. M = (10 × 0.936 × 10)/58.5 = 1.6 M.

Teacher's Note: Convert to % by mass, then use M = x·d·10/molar mass.

Exam Note: Use NaCl molar mass 58.5.

Question Illustration 4. 20 mL of 0.5 M HCl is mixed with 30 mL of 0.3 M HCl, the molarity of the resulting solution is:
(a) 0.8 M
(b) 0.53 M
(c) 0.38 M
(d) 0.83 M

Solution. Answer: (c)
M1V1 + M2V2 = MR(V1 + V2): 0.5 × 20 + 0.3 × 30 = MR × 50, so MR = 0.38 M.

Teacher's Note: Total moles over total volume; the result lies between 0.3 and 0.5.

Exam Note: Result must lie between the two molarities.

Question Illustration 5. How many moles and how many grams of NaCl are present in 250 mL of a 0.5 M NaCl solution?
(a) 0.125 mol; 7.32 g
(b) 7.32 mol; 0.125 g
(c) 0.125 mol; 0.125 g
(d) 7.32 mol; 7.32 g

Solution. Answer: (a)
Number of moles = MV/1000 = (0.5 × 250)/1000 = 0.125. Mass of NaCl = 58.5 × 0.125 = 7.32 g.

Teacher's Note: Moles = M × V(L); mass = moles × molar mass.

Exam Note: Give both moles and grams.

Question Illustration 6. Density of a 2.05 M solution of acetic acid in water is 1.02 g/mL. The molality of the solution is: (AIEEE 2006)
(a) 1.14 mol kg−1
(b) 3.28 mol kg−1
(c) 2.28 mol kg−1
(d) 0.44 mol kg−1

Solution. Answer: (c)
m = (M × 1000)/(1000d − M·mB) = (2.05 × 1000)/(1000 × 1.02 − 2.05 × 60) = 2.28 mol kg−1.

Teacher's Note: Use m = 1000M/(1000d − M·molar mass) to convert molarity to molality.

Exam Note: Molality exceeds molarity when d is near 1.

Question Illustration 7. The hardness of water sample containing 0.002 mol of magnesium sulphate dissolved in a litre of water is expressed as: (CET (Karnataka) 2007)
(a) 20 ppm
(b) 200 ppm
(c) 2000 ppm
(d) 120 ppm
(e) 240 ppm

Solution. Answer: (b)
106 g water contains (0.002 × 1000) mol MgSO4. 1 mol MgSO4 ≅ 1 mol CaCO3, therefore 2 mol MgSO4 ≅ 2 mol CaCO3, i.e. 2 × 100 g CaCO3. Hardness of water = 200 ppm.

Teacher's Note: Hardness is expressed as grams of CaCO3 equivalent per 106 g water.

Exam Note: Convert to CaCO3 equivalent, then ppm.

Question Illustration 8. The density (in g mL−1) of a 3.6 M sulphuric acid solution, i.e. 29% H2SO4 (molar mass = 98 g mol−1) by mass will be: (AIEEE 2007)
(a) 1.45
(b) 1.64
(c) 1.88
(d) 1.22

Solution. Answer: (d)
M = (x × d × 10)/mB, so d = (M × mB)/(x × 10) = (3.6 × 98)/(29 × 10) = 1.22 g mL−1.

Teacher's Note: Rearrange M = x·d·10/mB to find density.

Exam Note: Quote the formula before substituting.

Question Illustration 9. 1 litre solution containing 490 g of sulphuric acid is diluted to 10 litre with water. What is the normality of the resulting solution? (SCRA 2007)
(a) 0.5 N
(b) 1.0 N
(c) 5.0 N
(d) 10.0 N

Solution. Answer: (b)
N = (wB × 1000)/(EB × V) = (490 × 1000)/(49 × 1000) = 10. N1V1 = N2V2: 10 × 1 = N2 × 10, so N2 = 1.

Teacher's Note: Find initial normality with E = 49, then apply N1V1 = N2V2.

Exam Note: Equivalent mass of H2SO4 is 49.

Question Illustration 10. 250 mL of a Na2CO3 solution contains 2.65 g of Na2CO3. 10 mL of this solution is added to x mL of water to obtain 0.001 M Na2CO3 solution. The value of x is: (BHU (Mains) 2008) (Molecular mass of Na2CO3 = 106 amu)
(a) 1000
(b) 990
(c) 9990
(d) 90

Solution. Answer: (b)
Molarity of solution M = (wB × 1000)/(mB × V) = (2.65 × 1000)/(106 × 250) = 0.1. M1V1 = M2V2: 0.1 × 10 = 0.001 × (10 + x), so x = 990 mL.

Teacher's Note: Final volume is 10 + x mL, not x; dilution equation uses it.

Exam Note: Final volume = 10 + x is the trap.

Question Illustration 11. The volumes of two HCl solutions A (0.5 N) and B (0.1 N) to be mixed for preparing 2 L of 0.2 N HCl are: (EAMCET (Med) 2008)
(a) 0.5 L of A + 1.5 L of B
(b) 1.5 L of A + 0.5 L of B
(c) 1 L of A + 1 L of B
(d) 0.75 L of A + 1.25 L of B

Solution. Answer: (a)
Let x L of A and (2 − x) L of B be mixed. M1V1 + M2V2 = MR(V1 + V2): 0.5x + 0.1(2 − x) = 0.2 × 2, so (0.5 − 0.1)x = 0.4 − 0.2, 0.4x = 0.2, x = 0.5 L. Hence 0.5 L of A and 1.5 L of B should be mixed.

Teacher's Note: Total equivalents balance: 0.5x + 0.1(2 − x) = 0.4.

Exam Note: Total volume is fixed at 2 L.

Question Example 19. The vapour pressures of ethanol and methanol are 44.5 mm and 88.7 mm Hg respectively. An ideal solution is formed at the same temperature by mixing 60 g of ethanol with 40 g of methanol. Calculate the total vapour pressure of the solution and the mole fraction of methanol in the vapour.

Solution. Mol. mass of ethyl alcohol (C2H5OH) = 46; moles = 60/46 = 1.304. Mol. mass of methyl alcohol (CH3OH) = 32; moles = 40/32 = 1.25.
Mole fraction of ethyl alcohol XA = 1.304/(1.304 + 1.25) = 0.5107; of methyl alcohol XB = 1.25/(1.304 + 1.25) = 0.4893.
Partial pressure of ethyl alcohol = XA·pA0 = 0.5107 × 44.5 = 22.73 mm Hg.
Partial pressure of methyl alcohol = XB·pB0 = 0.4893 × 88.7 = 43.40 mm Hg.
Total vapour pressure of solution = 22.73 + 43.40 = 66.13 mm Hg.
Mole fraction of methyl alcohol in the vapour = (partial pressure of CH3OH)/(total vapour pressure) = 43.40/66.13 = 0.6563

Teacher's Note: Raoult's law gives partial pressures; vapour is richer in the more volatile component.

Exam Note: Vapour mole fraction = partial pressure ÷ total pressure.

Question Example 20. Two liquids A and B form an ideal solution. At 300 K, the vapour pressure of a solution containing 1 mole of A and 3 mole of B is 550 mm of Hg. At the same temperature, if one more mole of B is added to this solution, the vapour pressure of the solution increases by 10 mm of Hg. Determine the vapour pressure of A and B in their pure states.

Solution. Let the vapour pressure of pure A be pA0 and that of pure B be pB0.
Total vapour pressure of solution (1 mole A + 3 mole B) = XA·pA0 + XB·pB0: 550 = (1/4)pA0 + (3/4)pB0, or 2200 = pA0 + 3pB0 ... (i)
Total vapour pressure (1 mole A + 4 mole B): 560 = (1/5)pA0 + (4/5)pB0, or 2800 = pA0 + 4pB0 ... (ii)
Solving (i) and (ii): pB0 = 600 mm Hg = vapour pressure of pure B; pA0 = 400 mm Hg = vapour pressure of pure A.

Teacher's Note: Write Raoult's law twice (before and after adding B) and solve two equations.

Exam Note: Mole fractions change: 1/4, 3/4 then 1/5, 4/5.

Question Example 21. An aqueous solution containing 28% by mass of a liquid A (mol. mass = 140) has a vapour pressure of 160 mm at 37°C. Find the vapour pressure of the pure liquid A (The vapour pressure of water at 37°C is 150 mm).

Solution. For two miscible liquids, Ptotal = (mole fraction of A) × pA0 + (mole fraction of B) × pB0.
Moles of A = 28/140 = 0.2. Liquid B is water; its mass is (100 − 28) = 72 g; moles of B = 72/18 = 4.0. Total moles = 0.2 + 4.0 = 4.2.
Given Ptotal = 160 mm, pB0 = 150 mm: 160 = (0.2/4.2) × pA0 + (4.0/4.2) × 150.
pA0 = (17.15 × 4.2)/0.2 = 360.15 mm (more precisely 17.143 × 4.2/0.2 = 360 mm)

Teacher's Note: Treat 100 g of solution as basis; water is solvent B at 150 mm.

Exam Note: Basis 100 g makes mass percent directly usable.

Question Example 22. Heptane and octane form an ideal solution. At 373 K, the vapour pressures of the two liquids are 105.2 kPa and 46.8 kPa respectively. What will be the vapour pressure, in bar, of a mixture of 25 g of heptane and 35 g of octane?

Solution. (A) Heptane C7H16, mA = 100; (B) Octane C8H18, mB = 114.
nA = wA/mA = 25/100 = 0.25; nB = 35/114 = 0.3.
XA = 0.25/(0.25 + 0.30) = 0.45; XB = 0.30/(0.25 + 0.30) = 0.55.
p = pA0XA + pB0XB = 105.2 × 0.45 + 46.8 × 0.55 = 47.34 + 25.74 = 73.08 kPa.
In bar (1 bar = 100 kPa): 0.73 bar.

Teacher's Note: Convert grams to moles first; then Raoult's law for each component.

Exam Note: Final unit conversion kPa to bar earns the mark.

Question Illustration 12. Mole fraction of the component A in vapour phase is x1 and mole fraction of component A in liquid mixture is x2, then (pA0 = vapour pressure of pure A; pB0 = vapour pressure of pure B), the total vapour pressure of liquid mixture is:
(a) pA0 x2/x1
(b) pA0 x1/x2
(c) pB0 x1/x2
(d) pB0 x2/x1

Solution. Answer: (a)
pA = pA0x2. Mole fraction of A in vapour = pA/ptotal, so x1 = pA0x2/p, giving p = pA0x2/x1.

Teacher's Note: Combine Raoult's law with Dalton's law: yA = pA/P.

Exam Note: Keep liquid fraction x2 on top.

Question Illustration 13. Vapour pressure of pure A (pA0) = 100 mm Hg; vapour pressure of pure B (pB0) = 150 mm Hg. 2 mole of liquid A and 3 mole of liquid B are mixed to form an ideal solution. The vapour pressure of solution will be:
(a) 135 mm
(b) 130 mm
(c) 140 mm
(d) 145 mm

Solution. Answer: (b)
xA = 2/5, xB = 3/5. p = pA0xA + pB0xB = 100 × 2/5 + 150 × 3/5 = 40 + 90 = 130 mm.

Teacher's Note: Weighted average of pure vapour pressures by mole fraction.

Exam Note: Answer must lie between 100 and 150.

Question Illustration 14. The vapour pressure of a certain pure liquid A at 298 K is 40 m bar. When a solution of B is prepared in A at the same temperature, the vapour pressure is found to be 32 m bar. The mole fraction of A in the solution is:
(a) 0.5
(b) 0.2
(c) 0.1
(d) 0.8

Solution. Answer: (d)
p = p0xA: 32 = 40 × xA, so xA = 0.8.

Teacher's Note: B is non-volatile here, so p = p0xA.

Exam Note: Ratio 32/40 gives the answer directly.

Question Illustration 15. 100 mL of liquid A and 25 mL of liquid B are mixed to form a solution of volume 125 mL. Then the solution is:
(a) ideal
(b) non-ideal with positive deviation
(c) non-ideal with negative deviation
(d) cannot be predicted

Solution. Answer: (a)
ΔVmix = 0, hence the solution is ideal.

Teacher's Note: Additive volumes (ΔVmix = 0) indicate an ideal solution.

Exam Note: Compare final volume with the sum of volumes.

Question Illustration 16. The vapour pressure of pure benzene at 88°C is 957 mm and that of toluene at the same temperature is 379.5 mm. Calculate the composition of benzene-toluene mixture boiling at 88°C:
(a) xbenzene = 0.66; xtoluene = 0.34
(b) xbenzene = 0.34; xtoluene = 0.66
(c) xbenzene = xtoluene = 0.5
(d) xbenzene = 0.75; xtoluene = 0.25

Solution. Answer: (a)
The mixture boils when total pressure = 760 mm. p = p0benzenexbenzene + p0toluenextoluene: 760 = 957·xbenzene + 379.5(1 − xbenzene), so xbenzene = 0.66 and xtoluene = 1 − 0.66 = 0.34.

Teacher's Note: Boiling at 1 atm means total vapour pressure equals 760 mm Hg.

Exam Note: Use 760 mm as total pressure at boiling.

Question Illustration 17. At 25°C, the total pressure of an ideal solution obtained by mixing 3 mole of A and 2 mole of B, is 184 torr. What is the vapour pressure (in torr) of pure B at the same temperature (Vapour pressure of pure A at 25°C is 200 torr.)? (CET (J&K) 2006)
(a) 180
(b) 160
(c) 16
(d) 100

Solution. Answer: (b)
xA = nA/(nA + nB) = 3/(3 + 2) = 0.6; xB = 0.4. p = pA0xA + pB0xB: 184 = 200 × 0.6 + pB0 × 0.4 = 120 + pB0 × 0.4, so pB0 = 64/0.4 = 160 torr.

Teacher's Note: Substitute mole fractions into Raoult's law and solve for pB0.

Exam Note: Mole fractions 0.6 and 0.4 first.

Question Illustration 18. The mass of glucose that would be dissolved in 50 g of water in order to produce the same lowering of vapour pressure as is produced by dissolving 1 g of urea in the same quantity of water is: (KCET 2006)
(a) 1 g
(b) 3 g
(c) 6 g
(d) 18 g

Solution. Answer: (b)
(Δp)glucose = (Δp)urea, i.e. (xB)glucose = (xB)urea, i.e. (nB/nA)glucose = (nB/nA)urea. So (wB/180) × (18/50) = (1/60) × (18/50), giving wB = 3 g.

Teacher's Note: Equal lowering in the same solvent means equal moles of solute.

Exam Note: Same lowering means same moles: 1/60 mol.

Question Example 23. 50 g of a saturated aqueous solution of potassium chloride at 30°C is evaporated to dryness, when 13.2 g of dry KCl was obtained. Calculate the solubility of KCl in water at 30°C.

Solution. Mass of water in solution = (50 − 13.2) = 36.8 g.
Solubility of KCl = (mass of KCl/mass of water) × 100 = (13.2/36.8) × 100 = 35.87 g (per 100 g water)

Teacher's Note: Solubility is grams of solute per 100 g of solvent, not of solution.

Exam Note: Subtract residue to get solvent mass first.

Question Example 24. How much copper sulphate will be required to saturate 100 g of a dilute aqueous solution of CuSO4 at 25°C if 10 g of the dilute solution leave on evaporation and drying 1.2 g of anhydrous CuSO4? The solubility of CuSO4 in water at 25°C is 25.

Solution. 100 g of dilute solution contain 1.2 × 10 = 12.0 g CuSO4. Mass of water present in dilute solution = (100 − 12) = 88 g.
To saturate 100 g of water, CuSO4 required = 25 g, so to saturate 88 g of water, CuSO4 required = (25/100) × 88 = 22 g.
Thus, the mass of CuSO4 to be added to 100 g of dilute solution to saturate it = (22 − 12) = 10 g

Teacher's Note: Saturation needs 22 g in 88 g water; subtract what is already dissolved.

Exam Note: Answer is the extra solute, not the total.

Some Solved Examples

Question Example 25. Calculate the vapour pressure lowering caused by addition of 50 g of sucrose (molecular mass = 342) to 500 g of water if the vapour pressure of pure water at 25°C is 23.8 mm Hg.

Solution. According to Raoult's law, (p0 − ps)/p0 = n/(n + N), or Δp = [n/(n + N)] · p0.
Given: n = 50/342 = 0.146; N = 500/18 = 27.78 and p0 = 23.8.
Δp = [0.146/(0.146 + 27.78)] × 23.8 = 0.124 mm Hg

Teacher's Note: Relative lowering equals the solute mole fraction (non-volatile solute).

Exam Note: Mole fraction of solute, multiplied by p0.

Question Example 26. The vapour pressure of pure benzene at a certain temperature is 640 mm Hg. A non-volatile solid weighing 2.175 g is added to 39.0 g of benzene. The vapour pressure of the solution is 600 mm Hg. What is the molecular mass of the solid substance? (IIT 1990; MLNR 1992)

Solution. According to Raoult's law, (p0 − ps)/p0 = n/(n + N). Let m be the molecular mass of the solid substance.
n = 2.175/m; N = 39/78 = 0.5 (molecular mass of benzene = 78); p0 = 640 mm; ps = 600 mm.
(640 − 600)/640 = (2.175/m)/(2.175/m + 0.5), giving m = (2.175 × 16 − 2.175)/0.5 = 65.25

Teacher's Note: Convert relative lowering to mole fraction, then solve for moles of solute.

Exam Note: Benzene molar mass is 78, giving N = 0.5.

Question Example 27. A solution containing 30 g of a non-volatile solute in exactly 90 g of water has a vapour pressure of 21.85 mm of Hg at 25°C. Further, 18 g of water is then added to the solution; the new vapour pressure becomes 22.15 mm of Hg at 25°C. Calculate (a) molecular mass of the solute and (b) vapour pressure of water at 25°C. (MLNR 1990)

Solution. Let the vapour pressure of water at 25°C be p0 and molecular mass of the solute be m. Using Raoult's law in the form (p0 − ps)/ps = wM/(Wm):
For solution (I): (p0 − 21.85)/21.85 = (30 × 18)/(90 × m) ... (i)
For solution (II): (p0 − 22.15)/22.15 = (30 × 18)/(108 × m) ... (ii)
Dividing (i) by (ii): [(p0 − 21.85)/21.85] × [22.15/(p0 − 22.15)] = 108/90 = 6/5.
Corrected: solving gives p0 = 23.78 mm of Hg (the book prints 23.87, a transposition; it does not satisfy the equation). Substituting in (i): (23.78 − 21.85)/21.85 = 540/(90m), so m ≈ 67.8 (the book prints 67.9).
(a) Molecular mass of solute ≈ 67.8; (b) vapour pressure of water at 25°C = 23.78 mm Hg.

Teacher's Note: Two vapour pressures with two water amounts give two equations in p0 and m.

Exam Note: Divide the two equations to eliminate m.

Question Example 28. What mass of non-volatile solute (urea) needs to be dissolved in 100 g of water in order to decrease the vapour pressure of water by 25%. What will be the molality of solution? (IIT 1993)

Solution. Using Raoult's law in the form (p0 − ps)/ps = wM/(Wm). If p0 = 100 mm, then ps = 75 mm.
(100 − 75)/75 = (w × 18)/(100 × 60), so w = 111.1 g.
Molality = (w × 1000)/(m × W) = (111.1 × 1000)/(60 × 100) = 18.52 m

Teacher's Note: Assume p0 = 100 so a 25% decrease means ps = 75.

Exam Note: Use the ps form (denominator ps).

Question Example 29. A current of dry air was bubbled through a bulb containing 26.66 g of an organic compound in 200 g of water, then through a bulb at the same temperature, containing water and finally through a tube containing anhydrous calcium chloride. The loss of mass in bulb containing water was 0.087 g and gain in mass of the calcium chloride tube was 2.036 g. Calculate the molecular mass of the organic substance.

Solution. (p0 − ps)/p0 = (loss in mass of solvent bulb)/(gain in mass of CaCl2 tube) = 0.087/2.036.
Let the molecular mass of the organic substance be m. According to Raoult's law, (p0 − ps)/p0 = (w/m)/(w/m + W/M).
0.087/2.036 = (26.66/m)/(26.66/m + 200/18)
m = 53.75

Teacher's Note: Ostwald-Walker: bulb loss over CaCl2 gain equals relative lowering.

Exam Note: Loss of pure-water bulb gives Δp; total gives p0.

Question Example 30. The vapour pressure of a dilute aqueous solution of glucose is 750 mm Hg at 373 K. Calculate (i) molality, (ii) mole fraction of the solute.

Solution. p0 = vapour pressure of water at 373 K = 760 mm Hg. Using Raoult's law in the form (p0 − ps)/ps = wM/(Wm):
(760 − 750)/750 = (w/(W × m)) × 18, or w/(W × m) = 10/(750 × 18).
(i) Molality = (w/(W × m)) × 1000 = (10 × 1000)/(750 × 18) = 0.74 m.
(ii) ps = mole fraction of solvent × p0, so mole fraction of solvent = 750/760. Mole fraction of solute = 1 − 750/760 = 0.0132

Teacher's Note: Water boils at 373 K when p0 = 760 mm; use this as pure solvent pressure.

Exam Note: Know p0 = 760 mm for water at 373 K.

Question Example 31. Calculate the vapour pressure of an aqueous solution which contains 5 mass per cent of urea. The vapour pressure of pure water is 23.5 mm Hg. Molar mass of urea is 60.

Solution. Take 100 g of solution. Mass of urea = 5 g; mass of water = (100 − 5) = 95 g.
Moles of urea = 5/60 = 0.083; moles of water = 95/18 = 5.278. Total moles = 5.278 + 0.083 = 5.361.
Mole fraction of solvent = 5.278/5.361.
ps = mole fraction of solvent × p0 = (5.278/5.361) × 23.5 = 23.14 mm

Teacher's Note: A 100 g basis converts mass percent to moles easily.

Exam Note: Use solvent mole fraction times p0.

Question Example 32. 10 g of glucose (molar mass 180) and 20 g of sucrose (molar mass 342) are dissolved in 100 g of water. What will be the vapour pressure of the resultant solution if the vapour pressure of water is 35 mm Hg?

Solution. Mass of glucose = 10 g; moles = 0.0556. Mass of sucrose = 20 g; moles = 0.0585. Mass of water = 100 g; moles = 5.556.
Total moles = 5.556 + 0.0585 + 0.0556 = 5.67. Mole fraction of water = 5.556/5.67.
Vapour pressure of solution = mole fraction of water × p0 = (5.556/5.67) × 35 = 34.3 mm Hg

Teacher's Note: Both solutes are non-volatile; add their moles to the total.

Exam Note: Include moles of both solutes in the total.

Question Example 33. Calculate the vapour pressure of an aqueous solution of 1.0 molal glucose solution at 100°C.

Solution. Molality = (w/(m × W)) × 1000, where w = mass of solute in grams, W = mass of solvent in grams.
1.0 = (w/(m × W)) × 1000, or w/(m × W) = 1.0/1000 = 0.001.
Applying Raoult's law for dilute solution, (p0 − ps)/p0 = (w/(m × W)) × M (M = 18): (760 − ps)/760 = 0.001 × 18 (p0 = 760 mm at 100°C).
ps = 760 − 760 × 0.001 × 18 = 760 − 13.68 = 746.32 mm

Teacher's Note: At 100°C pure water has p0 = 760 mm; dilute form uses molality × 18/1000.

Exam Note: Dilute form: relative lowering = molality × 0.018.

Question Example 34. The vapour pressure of pure benzene at 50°C is 268 mm of Hg. How many moles of non-volatile solute per mole of benzene are required to prepare a solution of benzene having a vapour pressure 167 mm of Hg at 50°C?

Solution. Applying Raoult's law in the form (p0 − ps)/ps = wM/(Wm) = (w/m)/(W/M) = number of moles of solute per mole of benzene:
n/N = (268 − 167)/167 = 0.6047 ≈ 0.605
Alternative method: ps = mole fraction of solvent × p0, so 167 = mole fraction of solvent × 268; mole fraction of solvent = 167/268 = 0.623; mole fraction of solute = 1 − 0.623 = 0.377.
n/N = (mole fraction of solute)/(mole fraction of solvent) = 0.377/0.623 = 0.605

Teacher's Note: The ps-form directly gives moles of solute per mole of solvent.

Exam Note: Answer is a ratio n/N, not a mole fraction.

Illustrations of Objective Questions

Question Illustration 19. The vapour pressure of water at 23°C is 19.8 mm. 0.1 mole glucose is dissolved in 178.2 g of water. What is the vapour pressure (in mm) of the resultant solution?
(a) 19
(b) 19.602
(c) 19.402
(d) 19.202

Solution. Answer: (b)
nB = 0.1, nA = 178.2/18 = 9.9. xA = nA/(nA + nB) = 9.9/(9.9 + 0.1) = 0.99. p = p0xA = 19.8 × 0.99 = 19.602 mm.

Teacher's Note: Vapour pressure equals p0 times solvent mole fraction.

Exam Note: Get solvent moles from 178.2/18 = 9.9.

Question Illustration 20. What is the vapour pressure of the solution containing 34.2 g of sucrose per 100 g of water at 25°C? The vapour pressure of water at 25°C is 23.75 mm.
(a) 20.3 mm
(b) 23.10 mm
(c) unpredictable
(d) 23.33 mm

Solution. Answer: (d)
nA = 100/18 = 5.55; nB = 34.2/342 = 0.1. xA = 5.55/(5.55 + 0.1) = 5.55/5.65 = 0.982. p = p0xA = 23.75 × 0.982 = 23.33 mm.

Teacher's Note: Sucrose is non-volatile so p = p0xsolvent.

Exam Note: Molar mass of sucrose is 342.

Question Illustration 21. Lowering of vapour pressure due to a solute in 1 molal aqueous solution at 100°C is:
(a) 13.44 mm Hg
(b) 14.12 mm Hg
(c) 31.2 mm Hg
(d) 35.2 mm Hg

Solution. Answer: (a)
m = xB × 1000/((1 − xB)mA), where xB is the mole fraction of solute and mA the molar mass of solvent. 1 = xB × 1000/((1 − xB) × 18), so xB = 0.0176, xA = 0.9824. p = p0xA = 760 × 0.9824 = 746.62 mm; Δp = 760 − 746.62 ≈ 13.4 mm Hg.

Teacher's Note: Convert molality to mole fraction, then Δp = p0xB.

Exam Note: Water at 100°C has p0 = 760 mm.

Question Illustration 22. The mass of a non-volatile solute (molecular mass = 40) which should be dissolved in 114 g octane to reduce its vapour pressure to 80% will be:
(a) 20 g
(b) 30 g
(c) 10 g
(d) 40 g

Solution. Answer: (c)
If p0 = 100, then p = 80. p = p0xA, 80 = 100xA, xA = 0.80. xA = nA/(nA + nB) = (114/114)/(114/114 + wB/40) = 1/(1 + wB/40) = 0.8, so 1 + wB/40 = 1/0.8, giving wB = 10 g.

Teacher's Note: Vapour pressure reduced to 80% means solvent mole fraction 0.8.

Exam Note: Octane molar mass 114 gives exactly 1 mol.

Question Illustration 23. 3 g urea is dissolved in 45 g of water. The relative lowering of vapour pressure is: (Comed (Karnataka) 2008)
(a) 0.05
(b) 0.04
(c) 0.02
(d) 0.01

Solution. Answer: (c)
nB = 3/60 = 0.05; nA = 45/18 = 2.5. Δp/p0 = xB = 0.05/(2.5 + 0.05) = 0.0196 ≈ 0.02.

Teacher's Note: Relative lowering equals mole fraction of solute.

Exam Note: Don't use 0.05 (ratio to nA only) here.

Question Illustration 24. When 25 g of a non-volatile solute is dissolved in 100 g of water, the vapour pressure is lowered by 0.225 mm. If the vapour pressure of water at 25°C is 17.5 mm, what is the molecular mass of the solute? (EAMCET (Engg) 2008)
(a) 206
(b) 302
(c) 318
(d) 276

Solution. Answer: (c) as printed
Printed hint: p = p0xA: (17.5 − 0.225) = 17.5 × (100/18)/(100/18 + 25/mB), leading to mB = 318.
Corrected: the printed working does not give 318. Exactly, Δp/p0 = 0.225/17.5 = 0.012857 = nB/(nA + nB) with nA = 100/18 = 5.556, so nB = 0.0724 mol and mB = 25/0.0724 ≈ 345 g/mol (≈ 350 by the dilute approximation). None of the options matches exactly; the nearest option is (c) 318.

Teacher's Note: Equate relative lowering to solute mole fraction and solve for molar mass.

Exam Note: Answer from the exact Raoult expression, not shortcut.

Some Solved Examples

Question Example 35. On dissolving 10.8 g glucose (m.wt. = 180) in 240 g of water, its boiling point increases by 0.13°C. Calculate the molecular elevation constant of water.

Solution. ΔT = (100K′ × w)/(W × m), or K′ = (ΔT × W × m)/(100 × w).
Given ΔT = 0.13°C, W = 240 g, m = 180 and w = 10.8 g.
K′ = (0.13 × 240 × 180)/(100 × 10.8) = 5.2° (molecular elevation constant, per 100 g of solvent; the molal constant is Kb = K′/100 ≈ 0.52 K kg mol−1)

Teacher's Note: Molecular constant K′ refers to 100 g solvent; molal Kb refers to 1000 g.

Exam Note: Say which constant is asked: K′ (100 g) or Kb.

Question Example 36. A solution of 2.5 g of a non-volatile solid in 100 g benzene is boiled at 0.42°C higher than the boiling point of pure benzene. Calculate the molecular mass of the substance. Molal elevation constant of benzene is 2.67 K kg mol−1.

Solution. m = (1000Kb × w)/(W × ΔT). Given Kb = 2.67, w = 2.5 g, W = 100 g, ΔT = 0.42.
m = (1000 × 2.67 × 2.5)/(100 × 0.42) = 158.9.
The molecular mass of the substance is 158.9.

Teacher's Note: Rearrange ΔTb = 1000Kbw/(mW) for m.

Exam Note: Keep w and W in grams in this formula.

Question Example 37. The molal elevation constant for water is 0.56 K kg mol−1. Calculate the boiling point of a solution made by dissolving 6.0 g of urea (NH2CONH2) in 200 g of water.

Solution. ΔT = (1000Kb × w)/(m × W). Given Kb = 0.56 K kg mol−1, w = 6.0 g, W = 200 g, m = 60.
ΔT = (1000 × 0.56 × 6.0)/(200 × 60) = 0.28°C.
Thus, the boiling point of solution = b.p. of water + ΔT = (100°C + 0.28°C) = 100.28°C

Teacher's Note: The question asks boiling point, so add ΔT to 100°C.

Exam Note: Final answer is 100.28°C, not ΔT alone.

Question Example 38. By dissolving 13.6 g of a substance in 20 g of water, the freezing point decreased by 3.7°C. Calculate the molecular mass of the substance. (Molal depression constant for water = 1.863 K kg mol−1)

Solution. m = (1000Kf × w)/(W × ΔT). Given Kf = 1.863 K kg mol−1, w = 13.6 g, W = 20 g, ΔT = 3.7°C.
m = (1000 × 1.863 × 13.6)/(20 × 3.7) = 342.39

Teacher's Note: Use freezing point depression formula to get molar mass directly.

Exam Note: Substitute grams of solute and solvent consistently.

Question Example 39. On dissolving 0.25 g of a non-volatile substance in 30 mL benzene (density 0.8 g/mL), its freezing point decreases by 0.40°C. Calculate the molecular mass of the non-volatile substance (Kf = 5.12 K kg mol−1).

Solution. Mass of benzene, W = volume × density = 30 × 0.8 = 24 g. Given Kf = 5.12 K kg mol−1, w = 0.25 g, ΔT = 0.40°C.
m = (1000Kf × w)/(W × ΔT) = (1000 × 5.12 × 0.25)/(24 × 0.40) = 133.33

Teacher's Note: Solvent volume must first become mass using density.

Exam Note: Convert 30 mL to 24 g before substituting.

Question Example 40. A solution of 1.25 g of a certain non-volatile substance in 20 g of water freezes at 271.94 K. Calculate the molecular mass of the solute (Kf = 1.86 K kg mol−1).

Solution. Freezing point of solution = 271.94 K; freezing point of water = 273.0 K. ΔT = (273 − 271.94) = 1.06 K.
m = (1000Kf × w)/(W × ΔT) = (1000 × 1.86 × 1.25)/(20 × 1.06) = 109.66

Teacher's Note: ΔT is the difference between pure solvent and solution freezing points.

Exam Note: Find ΔT first from the two temperatures.

Question Example 41. Two elements A and B form compounds having molecular formulae AB2 and AB4. When dissolved in 20.0 g of benzene, 1.0 g of AB2 lowers the freezing point by 2.3°C, whereas 1.0 g of AB4 lowers the freezing point by 1.3°C. The molal depression constant for benzene in 1000 g is 5.1. Calculate the atomic masses of A and B.

Solution. m = (1000Kf × w)/(W × ΔT).
Molecular mass of AB2 = (1000 × 5.1 × 1)/(20 × 2.3) = 110.86; molecular mass of AB4 = (1000 × 5.1 × 1)/(1.3 × 20) = 196.15.
AB4 = A + 4B = 196.15 ... (i); AB2 = A + 2B = 110.86 ... (ii)
Subtracting (ii) from (i): 2B = 85.29, B = 42.645. From (ii): A + 85.29 = 110.86, A = 110.86 − 85.29 = 25.57.
Thus, the atomic masses of A and B are 25.57 and 42.645 respectively.

Teacher's Note: Get both molar masses, then subtract formulas to isolate B.

Exam Note: Subtracting formulas eliminates A cleanly.

Question Example 42. 1.355 g of a substance dissolved in 55 g of CH3COOH produced a depression in the freezing point of 0.618°C. Calculate the molecular weight of the substance (Kf = 3.85). (CECE (Mains) Bihar 2005)

Solution. ΔT = Kf × (wB × 1000)/(mB × wA), where wB = mass of solute, mB = molar mass of solute, wA = mass of solvent.
0.618 = 3.85 × (1.355 × 1000)/(mB × 55), so mB = 153.47

Teacher's Note: Solvent here is acetic acid with given Kf = 3.85.

Exam Note: Use solvent mass 55 g, not solution mass.

Question Example 43. An aqueous solution of a non-volatile solute boils at 100.17°C. At what temperature will the solution freeze? (Given: Kb = 0.512 K kg mol−1 and Kf = 1.86 K kg mol−1)

Solution. ΔTb = molality × Kb: 0.17 = molality × 0.512, so molality = 0.17/0.512 m.
Depression in freezing point ΔTf = molality × Kf = (0.17/0.512) × 1.86 = 0.62°C.
Thus, the freezing point of the solution is 0.00 − 0.62 = −0.62°C

Teacher's Note: Same molality links boiling elevation and freezing depression.

Exam Note: Compute molality once; reuse it with Kf.

Question Example 44. 18 g of glucose, C6H12O6, is dissolved in 1 kg of water in a saucepan. At what temperature will the water boil (1.013 bar pressure)? Kb for water is 0.52 K kg mol−1.

Solution. ΔT = Kb × (wB × 1000)/(mB × wA) = 0.52 × (18 × 1000)/(180 × 1000) = 0.052.
T − T0 = 0.052, so T − 373 = 0.052, T = 373.052 K

Teacher's Note: Molality here is 0.1 m; boiling point rises by Kb × 0.1.

Exam Note: State final temperature in K or °C.

Question Example 45. A solution of urea in water has boiling point of 100.15°C. Calculate the freezing point of the same solution if Kf and Kb for water are 1.87 K kg mol−1 and 0.52 K kg mol−1 respectively.

Solution. ΔTb = (100.15 − 100) = 0.15°C. ΔTb = molality × Kb, so molality = ΔTb/Kb = 0.15/0.52 = 0.2884.
ΔTf = molality × Kf = 0.2884 × 1.87 = 0.54°C.
Thus, the freezing point of the solution = −0.54°C

Teacher's Note: Molality links the two properties; freezing point lies below 0°C.

Exam Note: Report freezing point as −0.54°C.

Question Example 46. In a cold climate, water gets frozen causing damage to radiator of a car. Ethylene glycol is used as antifreezing agent. Calculate the amount of ethylene glycol to be added to 4 kg of water to prevent it from freezing at −6°C (Kf for water = 1.85 K kg mol−1). (IIT 1992)

Solution. Given ΔT = 6°C, W = 4 kg = 4000 g, m = 62, Kf = 1.85.
w = (m × W × ΔT)/(1000Kf) = (62 × 4000 × 6)/(1000 × 1.85) = 804.32 g

Teacher's Note: Ethylene glycol (CH2OH)2 has molar mass 62; solve the depression formula for mass.

Exam Note: Molar mass of glycol is 62, not 60.

Question Example 47. A solution containing 0.2563 g of naphthalene (molecular mass = 128) in 50 g of carbon tetrachloride yields a boiling point elevation of 0.201°C while a solution of 0.6216 g of an unknown solute in the same mass of the solvent gives a boiling point elevation of 0.647°C. Find the molecular mass of the unknown solute.

Solution. Kb = (ΔTb × W × m)/(1000 × w). For CCl4: Kb = (0.201 × 50 × 128)/(1000 × 0.2563) = 5.019.
Kb is now used in the second part: m = (1000 × Kb × w)/(ΔTb × W) = (1000 × 5.019 × 0.6216)/(0.647 × 50) = 96.44

Teacher's Note: Calibrate Kb using naphthalene, then use it for the unknown.

Exam Note: Find Kb first; then molar mass.

Question Example 48. Calculate the molal depression constant of a solvent which has freezing point 16.6°C and latent heat of fusion 180.75 J g−1.

Solution. Kf = RTf2/(1000 × Lf). R = 8.314 J K−1 mol−1, Tf = 16.6°C = 273 + 16.6 = 289.6 K, Lf = 180.75 J g−1.
Kf = (8.314 × (289.6)2)/(1000 × 180.75) = 3.86

Teacher's Note: Thermodynamic formula uses absolute freezing temperature and latent heat per gram.

Exam Note: Convert Tf to kelvin first.

Illustrations of Objective Questions

Question Illustration 25. Calculate the molal depression constant of a solvent which has freezing point 16.6°C and latent heat of fusion 180.75 J g−1: (JEE (Orissa) 2005)
(a) 2.68
(b) 3.86
(c) 4.68
(d) 2.86

Solution. Answer: (b)
Kf = RT02/(1000L), T0 = 273 + 16.6 = 289.6 K. Kf = 8.314 × (289.6)2/(1000 × 180.75) = 3.86.

Teacher's Note: Use Kf = RTf2/(1000Lf) with kelvin temperature.

Exam Note: Latent heat in J per gram, not per mole.

Question Illustration 26. The elevation in boiling point for 13.44 g of CuCl2 dissolved in 1 kg of water as solvent will be (Kb = 0.52 K kg mol−1; molar mass of CuCl2 = 134.4 g/mol): (IIT 2005)
(a) 0.05
(b) 0.10
(c) 0.16
(d) 0.20

Solution. Answer: (c)
i = 3, assuming complete ionisation of CuCl2. ΔT = i × Kb × (wB × 1000)/(mB × wA) = 3 × 0.52 × (13.44 × 1000)/(134.4 × 1000) = 0.156 ≈ 0.16.

Teacher's Note: CuCl2 is an electrolyte: van't Hoff factor i = 3 multiplies ΔT.

Exam Note: Include i = 3 for complete ionisation.

Question Illustration 27. A solution containing 7 g of a solute (molar mass 210 g mol−1) in 350 g of acetone raised the boiling point of acetone from 56°C to 56.3°C. The value of ebullioscopic constant of acetone in K kg mol−1 is:
(a) 2.66
(b) 3.15
(c) 4.12
(d) 2.86

Solution. Answer: (b)
ΔT = Kb × (wB × 1000)/(mB × wA): 0.3 = Kb × (7 × 1000)/(210 × 350), so Kb = (0.3 × 210 × 350)/(7 × 1000) = 3.15 K kg mol−1.

Teacher's Note: Ebullioscopic constant is Kb; rearrange ΔTb = Kbm.

Exam Note: ΔT = 56.3 − 56 = 0.3 K.

Question Illustration 28. The normal boiling point of toluene is 110.7°C and its boiling point elevation constant is 3.32 K kg mol−1. The enthalpy of vaporization of toluene is nearly:
(a) 17 kJ mol−1
(b) 21 kJ mol−1
(c) 51 kJ mol−1
(d) 68 kJ mol−1

Solution. Answer: (b) as printed
Printed hint: Kb = RT02/(1000L); 3.32 = (8.314 × 10−3 × (383.7)2)/(1000 × L), giving L = 0.368 kJ/g. The book then multiplies by 58 (the molar mass of acetone): 0.368 × 58 = 21.344 kJ mol−1.
Corrected: the solvent is toluene (C6H5CH3, molar mass 92 g mol−1), so ΔHvap = 0.368 × 92 ≈ 33.9 kJ mol−1 (about 34 kJ mol−1). None of the printed options matches; the printed key (b) comes from using the wrong molar mass.

Teacher's Note: Kb = RTb2M/(1000ΔHvap); use the solvent's own molar mass.

Exam Note: Use toluene's molar mass 92 for ΔH.

Question Illustration 29. An aqueous solution freezes at −0.186°C (Kf = 1.86 K kg mol−1, Kb = 0.512 K kg mol−1). The elevation of b. pt. of the solution is:
(a) 0.186
(b) 0.512
(c) 0.512/1.86
(d) 0.0512

Solution. Answer: (d)
ΔT = Kf × m: 0.186 = 1.86 × m, so m = 0.1. ΔTb = Kb × m = 0.512 × 0.1 = 0.0512.

Teacher's Note: Same solution: molality from freezing depression applies to boiling elevation.

Exam Note: Find molality once; apply Kb.

Question Illustration 30. The amount of urea to be dissolved in 500 cc of water (Kf = 1.86) to produce a depression of 0.186°C in the freezing point is: (UGET (Manipal) 2006)
(a) 9 g
(b) 6 g
(c) 3 g
(d) 0.3 g

Solution. Answer: (c)
ΔT = Kf × (wB × 1000)/(mB × wA): 0.186 = 1.86 × (wB × 1000)/(60 × 500), so wB = 3 g.

Teacher's Note: 500 cc water is 500 g; urea molar mass is 60.

Exam Note: Convert cc to g for water.

Question Illustration 31. What should be the freezing point of aqueous solution containing 17 g of C2H5OH in 1000 g of water (Kf for water = 1.86 deg kg mol−1)?
(a) −0.69°C
(b) 0.34°C
(c) 0.0°C
(d) −0.34°C

Solution. Answer: (a)
ΔT = Kf × (wB × 1000)/(mB × wA) = 1.86 × (17 × 1000)/(46 × 1000) = 0.69. Freezing point of solution = 0 − 0.69 = −0.69°C.

Teacher's Note: Subtract ΔTf from 0°C; the freezing point must be negative.

Exam Note: Answer is a negative temperature.

Some Solved Examples

Question Example 49. 200 cm3 of an aqueous solution contains 1.26 g of a polymer. The osmotic pressure of such solution at 300 K is found to be 2.57 × 10−3 bar. Calculate the molar mass of the polymer.

Solution. πV = (wB/mB)RT, so mB = (wB/V) × (RT/π) = (1.26/0.2) × (0.083 × 300)/(2.57 × 10−3) = 61038 g mol−1

Teacher's Note: Osmotic pressure suits polymers: tiny molar concentration still gives measurable π.

Exam Note: Use R = 0.083 L bar K−1 mol−1 with π in bar.

Question Example 50. A solution is prepared by dissolving 1.08 g of human serum albumin, a protein obtained from blood plasma, in 50 cm3 of aqueous solution. The solution has an osmotic pressure of 5.85 mm Hg at 298 K. (a) What is molar mass of albumin? (b) What is height of water column placed in solution? d(H2O) = 1 g cm−3

Solution. (a) mB = (wB × RT)/(πV) ... (i). Given wB = 1.08 g; R = 0.0821 litre atm K−1 mol−1; T = 298 K; π = 5.85/760 atm; V = 50/1000 = 0.05 litre.
mB = (1.08 × 0.0821 × 298)/((5.85/760) × 0.05) = 68655 g/mol
(b) π = h·d·g: π = (5.85/760) × 101325 Pa = 779.9 Pa; h = π/(d·g) = 779.9/(1000 × 9.8) m.
Corrected: h = 0.0796 m ≈ 7.96 cm of water. (The book prints h = 7.958 × 104 m = 7.958 × 106 cm, which is a units error.)

Teacher's Note: Part (b) needs SI units: π in Pa, d in kg m−3.

Exam Note: Keep d in kg/m³ when using g = 9.8.

Question Example 51. Calculate osmotic pressure of 5% solution of cane sugar (sucrose) at 15°C.

Solution. m = mol. mass of sucrose (C12H22O11) = 342; w = 5 g, V = 100 mL = 0.1 litre; S = 0.082, T = (15 + 273) = 288 K.
Applying PV = (w/m)ST: P = (5/342) × (1/0.1) × 0.082 × 288 = 3.453 atm

Teacher's Note: 5% means 5 g in 100 mL; convert volume to litres.

Exam Note: Temperature must be 288 K.

Question Example 52. The solution containing 10 g of an organic compound per litre showed an osmotic pressure of 1.18 atmosphere at 0°C. Calculate the molecular mass of the compound (S = 0.0821 litre atm per degree per mol).

Solution. m = (w/PV) · ST. Given w = 10 g, P = 1.18 atm, V = 1 litre, S = 0.0821 and T = 273 K.
m = (10/(1.18 × 1)) × 0.0821 × 273 = 189.94

Teacher's Note: Rearrange πV = (w/m)RT to find molar mass.

Exam Note: T = 273 K for 0°C.

Question Example 53. The osmotic pressure of a solution containing 30 g of a substance in 1 litre solution at 20°C is 3.2 atmosphere. Calculate the value of S. The molecular mass of solute is 228.

Solution. PV = (w/m)ST, so S = (m × P × V)/(w × T). Given m = 228, P = 3.2 atm, V = 1 litre, w = 30 g and T = 20 + 273 = 293 K.
S = (228 × 3.2 × 1)/(30 × 293) = 0.083 litre atm per degree per mol

Teacher's Note: S is the solution constant, numerically equal to gas constant R.

Exam Note: S ≈ 0.082 confirms the answer.

Question Example 54. What is the volume of solution containing 1 g mole of sugar that will give rise to an osmotic pressure of 1 atmosphere at 0°C?

Solution. Applying the equation PV = n·ST, V = (n/P) × S × T. Given n = 1, P = 1 atm, S = 0.0821 and T = 273 K.
V = (1/1) × 0.0821 × 273 = 22.4 litre

Teacher's Note: Same as molar volume of an ideal gas at STP, by van't Hoff analogy.

Exam Note: Notice the match with 22.4 L.

Question Example 55. Find the osmotic pressure of M/20 solution of urea at 27°C (S = 0.0821 lit atm K−1 mol−1).

Solution. Applying the equation PV = n·ST, P = (n/V) × S × T = Molarity × S × T. Given molarity = 1/20 = 0.05, S = 0.0821 and T = 27 + 273 = 300 K.
P = 0.05 × 0.0821 × 300 = 1.2315 atm

Teacher's Note: π = CRT with C = 0.05 mol/L.

Exam Note: Convert °C to K before substituting.

Question Example 56. The osmotic pressure of a solution of an organic substance containing 18 g in one litre of solution at 293 K is 2.414 × 105 Nm−2. Find the molecular mass of the substance. S = 8.3 J K−1 per mol.

Solution. Applying the equation PV = (w/m)·ST, m = (w/PV)·ST. Given P = 2.414 × 105 Nm−2, V = 1.0 lit = 1 × 10−3 m3, S = 8.3 J K−1 per mol, w = 18 g and T = 293 K.
m = (18/(2.414 × 105 × 1 × 10−3)) × 8.3 × 293 = 181.33

Teacher's Note: With S in J, pressure must be in Pa and volume in m³.

Exam Note: SI units throughout: Pa, m³, J K−1 mol−1.

Question Example 57. A 5% solution of cane sugar is isotonic with 0.877% solution of urea. Calculate the molecular mass of urea if molecular mass of cane sugar is 342.

Solution. Let the molecular mass of urea be m2. Molar concentration of sugar = w1/(m1 × V1) = 5/(342 × 0.1); molar concentration of urea = w2/(m2 × V2) = 0.877/(m2 × 0.1).
For isotonic solutions, w1/(m1V1) = w2/(m2V2): 5/(342 × 0.1) = 0.877/(m2 × 0.1)
m2 = (0.877 × 342)/5 = 59.987

Teacher's Note: Isotonic solutions have equal molar concentration at same temperature.

Exam Note: Equate molarities; temperature cancels.

Illustrations of Objective Questions

Question Illustration 32. Find out the osmotic pressure of 0.25 M aqueous solution of urea at 27°C (R = 0.082 litre atm K−1 mol−1, R = 1.987 cal K−1 mol−1). (CET (Gujarat) 2008)
(a) 6.15 atm
(b) 0.615 atm
(c) 0.0615 atm
(d) 61.5 atm

Solution. Answer: (a)
π = CRT = 0.25 × 0.0821 × 300 = 6.157 atm ≈ 6.15 atm.

Teacher's Note: Use R in litre atm units and T = 300 K for π in atm.

Exam Note: Avoid the cal-based R value here.

Question Illustration 33. Two solutions of glucose have osmotic pressures 1.5 and 2.5 atm. 1 litre of first solution is mixed with 2 litre of second solution. The osmotic pressure of the resultant solution will be:
(a) 1.62 atm
(b) 6.12 atm
(c) 1.26 atm
(d) 2.16 atm

Solution. Answer: (d)
π1V1 + π2V2 = πR(V1 + V2): 1.5 × 1 + 2.5 × 2 = πR × 3, so πR = 6.5/3 = 2.16 atm.

Teacher's Note: Same solute: osmotic pressures combine as volume-weighted average.

Exam Note: Weighted average must lie between 1.5 and 2.5.

Question Illustration 34. 18 g glucose and 6 g urea are dissolved in 1 litre aqueous solution at 27°C. The osmotic pressure of the solution will be:
(a) 3.826 atm
(b) 4.926 atm
(c) 2.92 atm
(d) 9.42 atm

Solution. Answer: (b)
πV = (n1 + n2)RT: π × 1 = (18/180 + 6/60) × 0.0821 × 300, so π = 4.926 atm.

Teacher's Note: Osmotic pressure depends on total moles of non-electrolyte solutes.

Exam Note: Add moles of both solutes first.

Question Illustration 35. A solution containing 10 g per dm3 of urea (m.w. = 60) is isotonic with a 5% solution of a non-volatile solute. The molecular mass of this non-volatile solute is: (CBSE (Medical) 2006)
(a) 250 g mol−1
(b) 300 g mol−1
(c) 350 g mol−1
(d) 200 g mol−1

Solution. Answer: (b)
π1(urea) = π2(unknown solute), so C1(urea) = C2(unknown): (10 × 1000)/(60 × 1000) = (5 × 1000)/(mB × 100), giving mB = 300 g mol−1.

Teacher's Note: Isotonic means equal molar concentration; 5% means 50 g/L.

Exam Note: 5% = 5 g per 100 mL, so 50 g per litre.

Question Illustration 36. The osmotic pressure of a solution at 0°C is 4 atm. What will be its osmotic pressure at 546 K under similar conditions?
(a) 4 atm
(b) 2 atm
(c) 8 atm
(d) 1 atm

Solution. Answer: (c)
π1/π2 = CRT1/CRT2 = T1/T2: 4/π2 = 273/546, so π2 = 8 atm.

Teacher's Note: At constant concentration, π is proportional to absolute temperature.

Exam Note: 0°C is 273 K; 546 K doubles π.

Question Illustration 37. The temperature at which 10% aqueous solution (W/V) of glucose will exhibit the osmotic pressure of 16.4 atm, is: (R = 0.082 dm3 atm K−1 mol−1) (PMT (Kerala) 2008)
(a) 360°C
(b) 180 K
(c) 90 K
(d) 300 K
(e) 360 K

Solution. Answer: (e)
πV = nRT, i.e. πV = (W/m)RT: 16.4 × (100/1000) = (10/180) × 0.082 × T, so T = 360 K.

Teacher's Note: 10% (W/V) means 10 g in 100 mL; solve πV = nRT for T.

Exam Note: Answer is in kelvin, not °C.

Abnormal Colligative Properties

Question Example 58. Phenol associates in benzene to a certain extent of a dimer. A solution containing 20 × 10−3 kg of phenol in 1.0 kg of benzene has its freezing point decreased by 0.69 K. Calculate the fraction of the phenol that has dimerised (Kf of benzene is 5.12 K kg mol−1).

Solution. Observed mol. mass = (1000 × Kf × w)/(W × ΔT) = (1000 × 5.12 × 20 × 10−3)/(1 × 0.69) = 148.4.
Normal mol. mass of phenol (C6H5OH) = 94.
Normal mol. mass/Observed mol. mass = 94/148.4 = 1 + (1/n − 1)α = 1 + (1/2 − 1)α = 1 − α/2, so α = 0.733 or 73.3%.

Teacher's Note: Dimerisation lowers particle count: i = 1 − α/2.

Exam Note: Observed mass above normal means association.

Question Example 59. The freezing point depression of 0.001 m Kx[Fe(CN)6] is 7.10 × 10−3 K. Determine the value of x. Given, Kf = 1.86 K kg mol−1 for water.

Solution. ΔTf = i × Kf × m: 7.10 × 10−3 = i × 1.86 × 0.001, so i = 3.817.
α = (i − 1)/(n − 1); taking complete dissociation (α = 1): 1 = (3.817 − 1)/((x + 1) − 1), so x = 2.817 ≈ 3.
∴ Molecular formula of the compound is K3[Fe(CN)6].

Teacher's Note: i equals number of ions per formula unit: x K+ plus one complex ion.

Exam Note: Round i = 3.8 to nearest ion count: 4 ions.

Question Example 60. A M/10 solution of potassium ferrocyanide is 46% dissociated at 18°C. What will be its osmotic pressure?

Solution. Normal osmotic pressure = (w/(m × V)) × S × T (when no dissociation has taken place). w/m = 0.1, V = 1 litre, S = 0.0821, T = 18 + 273 = 291 K.
Normal osmotic pressure = (0.1/1) × 0.0821 × 291 = 2.389 atm.
K4Fe(CN)6 ⇌ 4K+ + [Fe(CN)6]4−: before 1, after (1 − α), 4α, α. Total number of particles = 1 − α + 4α + α = 1 + 4α. α = 0.46; so 1 + 4α = 1 + 4 × 0.46 = 2.84.
Observed osmotic pressure/Normal osmotic pressure = 2.84/1, so observed osmotic pressure = 2.84 × 2.389 = 6.785 atm

Teacher's Note: Find normal π, then multiply by i = 1 + 4α for ferrocyanide.

Exam Note: Ferrocyanide gives 5 ions: n = 5.

Question Example 61. A 0.5% aqueous solution of KCl was found to freeze at −0.24°C. Calculate the van't Hoff factor and degree of dissociation of the solute at this concentration (Kf for water = 1.86 K kg mol−1).

Solution. Observed mol. mass of KCl = (1000 × Kf × w)/(ΔT × W). Given Kf = 1.86 K kg mol−1, w = 0.5 g, W = 100 g, ΔT = 0.24.
Observed mol. mass of KCl = (1000 × 1.86 × 0.5)/(0.24 × 100) = 38.75.
Normal mol. mass of KCl = 39 + 35.5 = 74.5. van't Hoff factor = normal mol. mass/observed mol. mass = 74.5/38.75 = 1.92.
KCl ⇌ K+ + Cl− (α is the degree of ionisation): total number of particles = 1 − α + α + α = 1 + α, so i = 1 + α. 1.92 = 1 + α, α = 0.92, i.e. 92% dissociated.

Teacher's Note: i = normal mass/observed mass; for AB type, α = i − 1.

Exam Note: KCl gives 2 ions, so α = i − 1.

Question Example 62. The freezing point of a solution containing 0.2 g of acetic acid in 20 g of benzene is lowered by 0.45°C. Calculate the degree of association of acetic acid in benzene (Kf for benzene is 5.12 K kg mol−1). (IIT 1994)

Solution. Let the observed molecular mass of acetic acid be mobs. = (1000 × Kf × w)/(W × ΔT) = (1000 × 5.12 × 0.2)/(20 × 0.45) = 113.78.
Normal molecular mass of acetic acid = 60. 2CH3COOH ⇌ (CH3COOH)2: before association 1, 0; after association (1 − α), α/2.
van't Hoff factor = normal mol. mass/obs. mol. mass = (1 − α + α/2)/1: 60/113.78 = 1 − α/2, so α = 0.945, or 94.5% associated.

Teacher's Note: Acetic acid dimerises in benzene; observed mass exceeds 60.

Exam Note: Dimer: particles = 1 − α/2.

Illustrations of Objective Questions

Question Illustration 38. 0.002 molar solution of NaCl having degree of dissociation 90% at 27°C has osmotic pressure equal to:
(a) 0.94 bar
(b) 9.4 bar
(c) 0.094 bar
(d) 9.4 × 10−4 bar

Solution. Answer: (c)
α = (i − 1)/(n − 1): 0.9 = (i − 1)/(2 − 1), i = 1.9. π = iCRT = 1.9 × 0.002 × 0.082 × 300 = 0.094 bar.

Teacher's Note: Include van't Hoff factor i = 1.9 in π = iCRT.

Exam Note: Compute i from α first.

Question Illustration 39. A 0.2 molal solution of KCl freezes at −0.68°C. If Kf for H2O is 1.86, the degree of dissociation of KCl is:
(a) 75%
(b) 83%
(c) 65%
(d) 92%

Solution. Answer: (b)
ΔT = i × Kf × m: 0.68 = i × 1.86 × 0.2, i = 1.83. α = (i − 1)/(n − 1) = (1.83 − 1)/(2 − 1) = 0.83. Ionization = 83%.

Teacher's Note: For KCl, α = i − 1 since n = 2.

Exam Note: Divide ΔT by Kf·m to get i.

Question Illustration 40. A certain substance 'A' tetramerises in water to the extent of 80%. A solution of 2.5 g of A in 100 g of water lowers the freezing point by 0.3°C. The molar mass of A is:
(a) 122
(b) 31
(c) 244
(d) 62

Solution. Answer: (d)
α = (1 − i)/(1 − 1/n): 0.8 = (1 − i)/(1 − 1/4), so i = 0.4. ΔT = iKfm: 0.3 = 0.4 × 1.86 × (2.5 × 1000)/(mB × 100), giving mB = 62.

Teacher's Note: Association reduces particles; for tetramer i = 1 − 3α/4.

Exam Note: i = 0.4 for 80% tetramerisation.

Question Illustration 41. van't Hoff factor of Hg2Cl2 in its aqueous solution will be (Hg2Cl2 is 80% ionized in the solution):
(a) 1.6
(b) 2.6
(c) 3.6
(d) 4.6

Solution. Answer: (b)
Hg2Cl2 ⇌ Hg22+ + 2Cl−, n = 3. α = (i − 1)/(n − 1): 0.8 = (i − 1)/(3 − 1), i = 2.6.

Teacher's Note: Three ions per formula unit: i = 1 + 2α.

Exam Note: n = 3 for Hg2Cl2.

Question Illustration 42. 0.1 M aqueous solution of MgCl2 at 300 K is 4.92 atm. What will be the percentage ionization of the salt?
(a) 49%
(b) 29%
(c) 39%
(d) 69%

Solution. Answer: (a)
π = iCRT: 4.92 = i × 0.1 × 0.0821 × 300, i = 1.99. α = (i − 1)/(n − 1) = (1.99 − 1)/(3 − 1) = 0.99/2 = 0.49. Percentage ionization = 49%.

Teacher's Note: MgCl2 gives 3 ions, so divide (i − 1) by 2.

Exam Note: Use n − 1 = 2 for MgCl2.

Question Illustration 43. Which of the following solutions will exhibit highest boiling point? (KCET 2006)
(a) 0.01 M Na2SO4
(b) 0.01 M KNO3
(c) 0.015 M urea
(d) 0.015 M glucose

Solution. Answer: (a)
ΔT = i × kb × m. i × m of Na2SO4 is highest, hence its boiling point will also be highest: Na2SO4 3 × 0.01 = 0.03; KNO3 2 × 0.01 = 0.02; urea 1 × 0.015 = 0.015; glucose 1 × 0.015 = 0.015.

Teacher's Note: Compare i × concentration; the largest value gives the greatest elevation.

Exam Note: Compute i × m for every option.

Miscellaneous Numerical Examples

Question Miscellaneous Example 1. Calculate the freezing point of an aqueous solution of a non-electrolyte having an osmotic pressure of 2.0 atmosphere at 300 K. (Kf = 1.86 K kg mol−1, R = 0.0821 litre-atm K−1 mol−1) (IIT 1993)

Solution. P = CRT, so C = P/RT = 2/(0.0821 × 300) mol lit−1. In dilute solution, the density of water can be taken as 1.0 g cm−3, hence 2/(0.0821 × 300) mol lit−1 = 2/(0.0821 × 300) mol kg−1.
Let ΔT be the depression in freezing point. ΔT = Kf × molality = 1.86 × 2/(0.0821 × 300) = 0.151 K.
Freezing point = (273 − 0.151) = 272.849 K or −0.151°C. (The book prints 272.749 K, an arithmetic slip; −0.151°C is consistent.)

Teacher's Note: Osmotic pressure gives concentration; dilute water solution has molarity ≈ molality.

Exam Note: State freezing point below 0°C.

Question Miscellaneous Example 2. Calculate the amount of NaCl which must be added to 100 g water so that freezing point is depressed by 2 K. For water, Kf = 1.86 K kg mol−1.

Solution. NaCl is a strong electrolyte. It is completely dissociated in solution. Degree of dissociation α = 1; NaCl ⇌ Na+ + Cl− (n = 2).
No. of particles after dissociation = 1 + (n − 1)α = 1 + (2 − 1) × 1 = 2.
ΔTobs./ΔTtheo. = 2: 2/ΔTtheo. = 2, so ΔTtheo. = 1.
Let w g of NaCl be dissolved in 100 g of water: ΔTtheo. = (1000 × Kf × w)/(W × m), so w = (ΔTtheo. × W × m)/(1000 × Kf) = (1 × 100 × 58.5)/(1000 × 1.86) = 3.145 g

Teacher's Note: NaCl gives two particles, so only half the depression is needed from formula mass.

Exam Note: Halve required ΔT: i = 2.

Question Miscellaneous Example 3. The degree of dissociation of Ca(NO3)2 in a dilute solution containing 14 g of the salt per 200 g of water at 100°C is 70%. If the vapour pressure of water is 760 mm, calculate the vapour pressure of solution. (IIT 1991)

Solution. Δptheo. = lowering in vapour pressure when there is no dissociation = p0 × (wM/(Wm)) (given p0 = 760 mm, w = 14 g, W = 200 g, M = 18, m = 164) = (760 × 14 × 18)/(200 × 164) = 5.84 mm.
Degree of dissociation = 70/100 = 0.7. Ca(NO3)2 ⇌ Ca2+ + 2NO3− (n = 3).
Δpobs./Δptheo. = [1 + (n − 1)α]/1 = 1 + (3 − 1) × 0.7 = 2.4. So Δpobs. = 2.4 × 5.84 = 14.02 mm.
p0 − ps = Δpobs. = 14.02, so ps = 760 − 14.02 = 745.98 mm

Teacher's Note: Compute Δp as if undissociated, then multiply by i = 1 + 2α.

Exam Note: i = 2.4 for 70% dissociation of a 3-ion salt.

Question Miscellaneous Example 4. Calculate the osmotic pressure of solution obtained by mixing 100 mL of 3.4% solution of urea (molecular mass = 60) and 100 mL of 1.6% solution of cane sugar (molecular mass = 342) at 20°C.

Solution. No. of moles of urea = 3.4/60 = 0.0567; no. of moles of cane sugar = 1.6/342 = 0.0047. Total number of moles = 0.0567 + 0.0047 = 0.0614.
Total volume of solution = (100 + 100) = 200 mL = 0.2 litre.
PV = (total number of moles) × S × T: P = (0.0614/0.2) × 0.0821 × 293 = 7.385 atm

Teacher's Note: Both solutes are non-electrolytes; total moles over total volume.

Exam Note: Add moles; total volume 0.2 L.

Question Miscellaneous Example 5. Calculate the normal boiling point of a sample of sea water found to contain 3.5% of NaCl and 0.13% of MgCl2 by mass. The normal boiling point of water is 100°C and Kb (water) = 0.51 K kg mol−1. Assume that both the salts are completely ionised.

Solution. Mass of NaCl = 3.5 g; no. of moles of NaCl = 3.5/58.5. Number of ions furnished by one molecule of NaCl is 2, so actual moles of particles from NaCl = 2 × 3.5/58.5. Similarly, particles from MgCl2 = 3 × 0.13/95.
Total moles of particles = (2 × 3.5/58.5 + 3 × 0.13/95) = 0.1238.
Mass of water = (100 − 3.5 − 0.13) = 96.37 g = 96.37/1000 kg. Molality = (0.1238/96.37) × 1000 = 1.2846.
ΔTb = molality × Kb = 1.2846 × 0.51 = 0.655 K. Hence, boiling point of sea water = 373.655 K or 100.655°C.

Teacher's Note: Count ions from each salt (2 and 3); molality uses total ion moles.

Exam Note: Total particle moles, not formula-unit moles.

Question Miscellaneous Example 6. A solution of a non-volatile solute in water has a boiling point of 375.3 K. Calculate the vapour pressure of water above this solution at 338 K. Given, p0 (water) = 0.2467 atm at 338 K and Kb for water = 0.52.

Solution. ΔTb = (375.3 − 373.15) = 2.15 K. ΔTb = molality × Kb: 2.15 = molality × 0.52, so molality = 2.15/0.52 = 4.135, i.e. 4.135 moles of the solute present in 1000 g of water (55.5 moles).
Mole fraction of water = 55.5/(4.135 + 55.5) = 55.5/59.635.
Vapour pressure of water above solution = mole fraction × p0 = (55.5/59.635) × 0.2467 = 0.23 atm

Teacher's Note: Boiling elevation gives molality, which gives solvent mole fraction at any temperature.

Exam Note: Use p0 at 338 K, not at 373 K.

Question Miscellaneous Example 7. Sea water is 3.5% by mass of a salt and has a density 1.04 g cm−3 at 293 K. Assuming the salt to be sodium chloride, calculate the osmotic pressure of sea water. Assume complete ionisation of the salt.

Solution. Mass of NaCl = 3.5 g; no. of moles = 3.5/58.5. Actual number of moles of particles of solute in solution = 2 × 3.5/58.5. Volume of solution = 100/(1.04 × 1000) litre.
π = (2 × 3.5/58.5) × (1.04 × 1000/100) × 0.0821 × 293 = 29.93 atm

Teacher's Note: Complete ionisation doubles the particle count; volume comes from density.

Exam Note: Volume of 100 g = 100/1.04 mL.

Question Miscellaneous Example 8. Molality of a solution in aqueous medium is 0.8. Calculate its mole fraction and the percentage by mass of solute if molar mass of solute is 60.

Solution. m = (xB × 1000)/((1 − xB) × mA) ... (i), where xB = mole fraction of solute and mA = molar mass of solvent. 0.8 = (xB × 1000)/((1 − xB) × 18), so xB = 0.014 (more precisely 0.0142).
Let wB = x g, wA = 100 g: m = (wB × 1000)/(mB × wA), so 0.8 = (x × 1000)/(60 × 100), x = 4.8 g of solute per 100 g of water.
Corrected: the book writes x = 4.8% as the mass percent of solute, but 4.8 g is per 100 g of water. Mass percent of solute in solution = 4.8/(100 + 4.8) × 100 = 4.58% (4.8 g per 100 g solvent).

Teacher's Note: 0.8 molal means 48 g solute per 1000 g water; percent is relative to the solution.

Exam Note: Percent by mass divides by solution mass, not solvent.

Question Miscellaneous Example 9. Calculate the boiling point of a solution containing 0.61 g of benzoic acid in 50 g of CS2(l) assuming 84% dimerisation of the acid. The boiling point and Kb of CS2 are 46.2°C and 2.3 K kg mol−1 respectively. (IIT 1997)

Solution. ΔT = i × Kb × molality = i × Kb × (w × 1000)/(m × W).
α = (1 − i)/(1 − 1/n): 0.84 = (1 − i)/(1 − 1/2), so i = 0.58.
ΔT = 0.58 × 2.3 × (0.61 × 1000)/(122 × 50) = 0.1334.
T − T0 = 0.1334, so T = T0 + 0.1334 = 46.2 + 0.1334 = 46.3334°C

Teacher's Note: Benzoic acid dimerises, so i = 1 − α/2 = 0.58; molar mass is 122.

Exam Note: Dimerisation: i below 1.

Question Miscellaneous Example 10. A very small amount of a non-volatile solute (that does not dissociate) is dissolved in 56.8 cm3 of benzene (density 0.889 g cm−3). At room temperature, vapour pressure of this solution is 98.8 mm Hg while that of benzene is 100 mm Hg. Find the molality of the solution. If the freezing temperature of this solution is 0.73 degree lower than that of benzene, what is the value of molal freezing point depression constant of benzene? (IIT 1997)

Solution. Δp/p0 = XA (mole fraction of solute): (100 − 98.8)/100 = XA = 0.012.
Molality = (XA × 1000)/((1 − XA) × mB) = (0.012 × 1000)/(0.988 × 78) = 0.1557.
ΔT = Kf × molality: 0.73 = Kf × 0.1557, so Kf = 4.688.
(Mass of benzene, w = 56.8 × 0.889 g, is not needed.)

Teacher's Note: Relative lowering equals solute mole fraction; molality follows with benzene M = 78.

Exam Note: Mole fraction first, then molality, then Kf.

Step-by-Step OP Tandon Solutions for JEE Math

Download OP Tandon Solutions for JEE

Review detailed solutions for JEE Mathematics. The OP Tandon Solutions Physical Chemistry IIT JEE Chapter 5 Solutions General Colligative Properties Part 1 PDF provides comprehensive answers mapped to standard OP Tandon Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Step-by-Step Mathematical Explanations

Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.

Additional Study Materials for 2026

Maximize your academic readiness by pairing these solutions with our official sample papers and interactive practice tests. All supplementary study materials for the 2026 session are available across our platform free of charge.

FAQs

What are these OP Tandon Solutions for JEE Chemistry?

They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the OP Tandon JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these OP Tandon solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising OP Tandon JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.