P Bahadur Solutions Numerical Chemistry Chapter 11 Chemical Kinetics Part 2

Official P Bahadur Textbook Solutions: JEE Chemistry Chapter 11 Chemical Kinetics

Review structured textbook solutions for JEE Chemistry Chapter 11 Chemical Kinetics prepared by P Bahadur. Built according to modern educational guidelines for the 2026 academic year, these downloadable answers support daily revision and mathematical accuracy.

Chapter-wise Solutions for Chemistry: Chapter 11 Chemical Kinetics

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chemical Kinetics - Solutions Part 2 (Numerical Problems 105-112, Single Integer, Objective, Previous Years, More Than One Answer, Comprehension, Statement-Explanation and Matching Problems)

Numerical Problems (continued)

Question 105. (Question statement is not printed in the source book; solution given below.)

Solution.

For I (second-order equation): K = (1/t)·x/[a(a − x)]. Given a = 0.1 M, x = 0.1 × 30/100 = 0.03, t = 60 min.

∴ K1 = (1/(60 × 0.1)) × 0.03/(0.1 − 0.03) = 0.07 min−1

Also, for I: K1 = Ae−Ea/RT; for II: K2 = Ae−E′a/RT

∴ K1/K2 = e(E′a − Ea)/RT = e−10.46/RT = e−10.46/(8.314 × 10−3 × 373)

or K2 = K1/e−10.46/(8.314×10−3×373) = 0.07/0.034 = 2.10 min−1

Now for II: K2 = (1/t)·x/[a(a − x)]; a = 0.05; x = 0.05 × 70/100 = 0.035

∴ t = (1/(2.10 × 0.05)) × 0.035/(0.05 − 0.05 × 70/100) = 22.22 min

Teacher's Note: Find K from reaction I, use the Arrhenius ratio to get K for II, then apply the second-order equation.

Exam Note: Show the Arrhenius ratio step for marks.

Question 106. (Question statement is not printed in the source book; solution given below.)

Solution.

By step (ii): −d[I−]/dt = K3[I−][HOCl] …(a)

By step (i): K1/K2 = [HOCl][OH−]/([OCl−][H2O]) …(b)

By step (iii): K′1/K′2 = [H2O][OI−]/([OH−][HOI]) …(c)

By Eqs. (b) and (a):

−d[I−]/dt = K3[I−]·(K1/K2)·[OCl−][H2O]/[OH−] = K3·(K1/K2)·[OCl−][I−]/[OH−] [since [H2O] is constant]

∴ −d[I−]/dt = K·[OCl−][I−]/[OH−]

Teacher's Note: Slow step gives the rate; fast equilibria express [HOCl] through [OCl⁻] and [OH⁻]; water concentration is constant.

Exam Note: Write rate of slow step first, then substitute.

Question 107. (Question statement is not printed in the source book; solution given below.)

Solution.

By step (iii): d[COCl2]/dt = K3[COCl][Cl2] …(a)

By step (i): K1/K2 = [Cl]2/[Cl2] …(b)

By step (ii): K′1/K′2 = [COCl]/([CO][Cl]) …(c)

Thus from Eqs. (b) and (c): [COCl] = (K′1/K′2)·[CO] × √(K1/K2·[Cl2]) …(d)

From Eqs. (a) and (d): d[COCl2]/dt = K3(K′1/K′2)(K1/K2)1/2[CO][Cl2]1/2·[Cl2]

d[COCl2]/dt = K·[CO][Cl2]3/2

Teacher's Note: Eliminate the radical concentrations [Cl] and [COCl] using the fast equilibria; the overall order comes out as 5/2.

Exam Note: Overall order 5/2; show both equilibrium substitutions.

Question 108. (Question statement is not printed in the source book; solution given below.)

Solution.

The rate of formation of urea is given by Eq. (iii): d[urea]/dt = K[NH3][HNCO] …(a)

By step (ii) we have: [NH3][HNCO]/[NH4NCO] = KC1 …(b)

By step (i) we have: [NH4NCO]/[NH4CNO] = KC2 …(c)

∴ By Eqs. (b) and (c): [NH3][HNCO] = KC1·KC2[NH4CNO] …(d)

∴ By Eqs. (a) and (d): d[urea]/dt = K·KC1·KC2[NH4CNO]

d[urea]/dt = K′[NH4CNO]

Teacher's Note: Chain two equilibrium constants to replace the intermediates; the overall rate is first order in ammonium cyanate.

Exam Note: Multiply the two K values; state first order.

Question 109. (Question statement is not printed in the source book; solution given below.)

Solution.

A ⇌ B (rate constants K1 forward, K2 backward)

t = 02 mol litre−10
At eq.(2 − X) mol litre−1X

K1 = 2 × 10−3 mol L−1 sec−1 (zero order); K2 = 3 × 10−3 sec−1 (1st order)

dX/dt = K1[A]0 − K2[B]1

At equilibrium dX/dt = 0 ∴ 0 = K1 − K2[X]eq.

∴ [X]eq. = K1/K2 = 2 × 10−3/(3 × 10−3) = 0.66 mol litre−1 = Kc

A⇌B
Initial eq.1.340.66
Moles added at eq.1.340.66 + 0.5 = 1.16

Addition of B will bring backward reaction; at time t: A = (1.34 + X), B = (1.16 − X)

∵ [B] = (3/4)[A]eq. = (3/4) × 1.34 = 1.005

(1.16 − X) = 1.005 ∴ X = 0.155

Now dX/dt = K1 − K2[X] = 0.66K2 − K2X = K2[0.66 − X]

∴ dX/(0.66 − X) = K2·dt, or −2.303 log(0.66 − X) = K2·t + C; at t = 0, X = 0

∴ C = −2.303 log 0.66 ∴ K2·t = 2.303 log [0.66/(0.66 − X)]

∴ t = (2.303/(3 × 10−3)) log [0.66/(0.66 − 0.155)] = 89.24 sec

Teacher's Note: Reversible zero-order forward and first-order backward reaction; equilibrium gives K1/K2, then integrate dX/dt = K2(0.66 − X).

Exam Note: Equilibrium condition first, then integrate.

Question 110. (Question statement is not printed in the source book; solution given below.)

Solution.

A0 → B: initially [A] = 0.01, [B] = 0; at equilibrium [A] = 0.01 − xeq., [B] = xeq.

[B]eq./[A]eq. = Kf/Kb = 10−2/Kb = 4 = [x]eq./(0.01 − [x]eq.)

∴ Kb = 0.25 × 10−2 and xeq. = 0.04/5 = 0.008

t = (2.303/(Kf + Kb)) log [x]eq./([x]eq. − x)

30 = (2.303/(1.25 × 10−2)) log [0.008/(0.008 − x)]

∴ 0.008/(0.008 − x) = 1.455 ∴ x = 2.50 × 10−3

Teacher's Note: Use K = Kf/Kb = 4 for equilibrium extent, then the first-order approach-to-equilibrium formula with (Kf + Kb).

Exam Note: Rate constant is the sum Kf + Kb.

Question 111. (Question statement is not printed in the source book; solution given below.)

Solution.

A branches into B (0.002), C (0.003) and D (0.00193). What is the pressure of B after 100 sec?

Kav = 0.002 + 0.003 + 0.00193 = 0.00693

Moles of (A) left: Kt = 2.303 log (8/[A]) = 0.00693 × 100 = 2.303 log (8/[A])

log (8/[A]) = 0.00693 × 100/2.303 = 0.3010 ∴ 8/[A] = 2

∴ moles of (A) left = 4; [A] decomposed = 8 − 4 = 4 mole

Moles of B formed = (0.002/0.00693) × 4 × 1 = 1.154

Teacher's Note: Parallel first-order paths: A decays with the sum of constants; product share is proportional to each constant.

Exam Note: Total K is the sum; B share = K_B/K_total.

Question 112. (Question statement is not printed in the source book; solution given below.)

Solution.

MnO4− + [Fe(H2O)2(C2O4)2]2− + 8H+ → Mn2+ + Fe3+ + 4CO2 + 6H2O

∵ −d[MnO4−]/dt = −(1/8) d[H+]/dt

∴ rH+/rMnO4− = 8

Teacher's Note: Rate of consumption of each species is proportional to its stoichiometric coefficient: 8 H⁺ per MnO₄⁻.

Exam Note: Divide each rate by its coefficient.

Single Integer Answer Problems

Question Single Integer Answer Problem 1. The decomposition of equal mole of two reactants P and Q obey I order kinetics with half life 54 and 18 minute respectively. If both are allowed to run for 54 minute. The ratio of mole of P and Q left after decomposition will be ......

Solution. In 54 min, P completes 1 half-life, so 1/2 is left; Q completes 3 half-lives, so (1/2)3 = 1/8 is left. Ratio = (1/2)/(1/8) = 4.

Answer (from key): Four.

Teacher's Note: Count half-lives elapsed for each reactant, then halve that many times.

Exam Note: Ratio of fractions left, not fractions decayed.

Question Single Integer Answer Problem 2. A reaction obeys II order kinetics. If the half life of the reaction is equal to its average life, then the value of reactant concentration at t = 0 is ......

Solution. For a second-order reaction t1/2 = 1/(Ka), and the average life is taken as 1/K; equating them gives a = 1 (concentration at t = 0 is 1 in the units of the rate constant).

Answer (from key): One.

Teacher's Note: Second-order half-life depends on initial concentration; equate to 1/K to get a.

Exam Note: Remember t½ = 1/(Ka) for second order.

Question Single Integer Answer Problem 3. A straight line with negative slope was found in graph of loge K vs. 1/T with an angle of 45° with y-axis. The energy of activation is ...... cal.

Solution. ln K = ln A − Ea/(RT), so slope = −Ea/R. A line at 45° to the y-axis is also at 45° to the x-axis, so |slope| = tan 45° = 1. Ea = R × 1 = 2 cal (R ≈ 2 cal K−1 mol−1).

Answer (from key): Two.

Teacher's Note: Arrhenius plot slope is −Ea/R; a 45° line has unit slope, so Ea = R.

Exam Note: Use R in cal (≈2) because the answer is in cal.

Question Single Integer Answer Problem 4. A straight line was obtained on plotting log10(dx/dt) vs. log10(a − x)n with an intercept on log(dx/dt) axis equal to 0.6021. The rate constant for the reaction is ...... litren−1 mole1−n t−1.

Solution. log(dx/dt) = log K + n log(a − x). The intercept equals log K = 0.6021, so K = antilog 0.6021 = 4.

Answer (from key): Four.

Teacher's Note: The intercept of log rate versus log concentration is log K.

Exam Note: Take antilog of the intercept, do not report log K.

Question Single Integer Answer Problem 5. Energy of activation for a reversible reaction is 6 kcal (Ea forward) and heat of reaction is −3 kcal. The energy of activation for backward reaction in kcal is ......

Solution. ΔH = Ea(forward) − Ea(backward), so Ea(backward) = 6 − (−3) = 9 kcal.

Answer (from key): Nine.

Teacher's Note: Exothermic reaction: backward barrier is forward barrier plus the magnitude of ΔH.

Exam Note: Keep the sign of ΔH in the subtraction.

Question Single Integer Answer Problem 6. A reaction occurs in 'n' parallel paths. For each path having energy of activation as E, 2E, 3E, … nE and rate constant K, 2K, 3K, … nK respectively. If EAV = 3E, then n is ......

Solution. Eav = ΣKiEi/ΣKi = E·Σr2/Σr = E·[n(n+1)(2n+1)/6]/[n(n+1)/2] = E(2n + 1)/3. Setting (2n + 1)/3 = 3 gives n = 4.

Answer (from key): Four.

Teacher's Note: Weighted average of activation energies, weights being the rate constants; use sums of r and r².

Exam Note: Quote the sum formulas for marks.

Question Single Integer Answer Problem 7. If d[NH3]/dt = 34 g hr−1 for the reaction N2 + 3H2 ⇌ 2NH3 then d[H2]/dt is ......... g hr−1.

Solution. 34 g NH3 = 2 mol per hr. For every 2 mol NH3 formed, 3 mol H2 are used, i.e. 3 mol = 6 g per hr. So −d[H2]/dt = 6 g hr−1 (magnitude).

Answer (from key): Six.

Teacher's Note: Convert grams to moles first, then use the 2:3 stoichiometric ratio.

Exam Note: Convert back to grams at the end.

Question Single Integer Answer Problem 8. The half-life period of a reaction, becomes 16 times when reactant concentration is halved. The order of reaction is ......

Solution. t1/2 ∝ a1−n. Halving a gives (1/2)1−n = 2n−1 = 16 = 24, so n − 1 = 4 and n = 5.

Answer (from key): Five.

Teacher's Note: Use t½ ∝ a^(1−n) and equate powers of 2.

Exam Note: Sign of the exponent is the usual trap.

Question Single Integer Answer Problem 9. The half lives of two parallel path reaction A → B and A → C are 4 hrs and 12 hrs respectively. The average half-life for the decay of A is ......

Solution. K1 = 0.693/4 and K2 = 0.693/12. Kav = K1 + K2 = 0.693(1/4 + 1/12) = 0.693/3. Hence t1/2 = 3 hrs.

Answer (from key): Three.

Teacher's Note: Parallel first-order paths add their rate constants, not their half-lives.

Exam Note: Add the K values, then convert back to half-life.

Question Single Integer Answer Problem 10. The unit of rate constant for a reaction is litre2 mol−2 t−1. The order of reaction is ......

Solution. Unit of K = (litre/mol)n−1 t−1. Here n − 1 = 2, so n = 3.

Answer (from key): Three.

Teacher's Note: Power of (L/mol) in the unit of K equals n − 1.

Exam Note: Do not read the power as the order itself.

Question Single Integer Answer Problem 11. For the I order reaction 3A → 2B, the concentration of A and B at the intersection is given in figure. If [A]0 = 20 mol litre−1 then [B] at time t is equal to ......

Solution. Figure (described): concentration against time; the curve of A falls and the curve of B rises, and the two curves cross at time t. At the intersection [A] = [B]. If 3y mol/L of A has reacted, [A] = 20 − 3y and [B] = 2y. Equating, 20 − 3y = 2y, so y = 4 and [B] = 8 mol litre−1.

Answer (from key): Eight.

Teacher's Note: Use the 3:2 stoichiometry and set [A] = [B] at the crossing point.

Exam Note: Do not assume B equals half of A initial.

Question Single Integer Answer Problem 12. For the reaction: 2A + 3B ⇌ cC rate of formation of C is expressed as d[C]/dt = −3[dA]/dt. The value of c is :

Solution. Rate = −(1/2) d[A]/dt = (1/c) d[C]/dt, so d[C]/dt = −(c/2) d[A]/dt. Comparing with −3 d[A]/dt gives c/2 = 3, so c = 6.

Answer (from key): Six.

Teacher's Note: Rate of reaction divided by each coefficient is the same for all species.

Exam Note: Write the rate equalities first.

Question Single Integer Answer Problem 13. The order of reaction for H2 + Br2 → 2HBr if it is carried over water is :

Solution. Answer as printed in the key: zero order. (This answer is taken from the book's key and is not derived here.)

Answer (from key): Zero.

Teacher's Note: Order is fixed by the experimental rate law, not the balanced equation.

Exam Note: Key answer is zero order.

Question Single Integer Answer Problem 14. The decomposition of NH3 on solid surface, e.g., Pt shows the order of reaction equal to :

Solution. On a metal surface the catalyst surface is saturated with ammonia, so the rate does not depend on [NH3]: zero order.

Answer (from key): Zero.

Teacher's Note: Surface-saturated heterogeneous catalysis gives zero order.

Exam Note: Mention saturation of the surface.

Question Single Integer Answer Problem 15. The time required to complete 99.9% decay is ...... times of the time required to complete 90% decay.

Solution. First order: t = (2.303/K) log[100/(100 − p)]. For 99.9%: log 1000 = 3. For 90%: log 10 = 1. Ratio = 3.

Answer (from key): Three.

Teacher's Note: Use the first-order integrated law; the logs are 3 and 1.

Exam Note: State the first-order assumption.

Question Single Integer Answer Problem 16. The rate of decomposition of a substance increases 2.25 times of concentration of reactant is increased by 1.5 times at same T. The order of reaction is :

Solution. Rate ∝ Cn, so (1.5)n = 2.25 = (1.5)2, hence n = 2.

Answer (from key): Two.

Teacher's Note: Equate the rate ratio to the concentration ratio raised to n.

Exam Note: Recognise 2.25 as 1.5 squared.

Question Single Integer Answer Problem 17. For an elementary reaction A → B shown in the figure. The sum of slopes for curve A and B at the intersection point is :

Solution. Figure (described): concentration against time; [A] falls from [A]0 and [B] rises from [B]0; they intersect at [A]0/2 at time t. Since A → B, the rate of fall of A equals the rate of rise of B at every instant: slope of A = −d[A]/dt-type negative, slope of B is equal and positive. Their sum is zero.

Answer (from key): Zero.

Teacher's Note: One mole of B forms for each mole of A lost, so slopes are equal and opposite.

Exam Note: Sum of equal and opposite slopes is zero.

Question Single Integer Answer Problem 18. In the above curve if rate constant for A is 0.34660, then t is :

Solution. At the intersection [A] = [A]0/2, so t = t1/2 = 0.693/K = 0.693/0.3466 = 2.

Answer (from key): Two.

Teacher's Note: Intersection of A and B is at half of initial A, so t equals the half-life.

Exam Note: Use t½ = 0.693/K.

Question Single Integer Answer Problem 19. The half life period for a reaction is 50 minute. If initial concentration is halved, the half life period is reduced to 25 minute. The order of reaction is :

Solution. t1/2 ∝ a1−n. (1/2)1−n = 25/50 = 1/2, so 1 − n = 1 and n = 0.

Answer (from key): Zero.

Teacher's Note: Half-life proportional to initial concentration signals zero order.

Exam Note: Compare the half-life ratio to concentration ratio.

Question Single Integer Answer Problem 20. For the reaction involving single reactant Co√t1/2 is found to be constant, where Co is initial concentration and t1/2 is half life. The order of reaction is ......

Solution. C0√t1/2 = constant means t1/2 ∝ C0−2. Since t1/2 ∝ C01−n, 1 − n = −2 and n = 3.

Answer (from key): Three.

Teacher's Note: Square the given relation to get t½ ∝ C0⁻², then compare with 1 − n.

Exam Note: Do not forget to square.

Question Single Integer Answer Problem 21. Energy of activation for free radical combination is ......

Solution. Combination of free radicals needs no bond breaking, so the activation energy is zero.

Answer (from key): Zero.

Teacher's Note: Radical recombination forms a bond without any barrier.

Exam Note: Radical combination has Ea = 0.

Question Single Integer Answer Problem 22. For the reaction C6H5CHBr(CH3) + OH− → C6H5CH(OH)CH3 + Br−, rate law was found as: Rate = 4.8 × 10−5 [Br−][OH−] + 2.4 × 10−6 [Br−] (as printed; the bracketed species is the alkyl bromide substrate). If the concentration of OH− is 0.001 M, the % by which SN2 path is followed is ......

Solution. SN2 term (first order in OH−) = 4.8 × 10−5 × 10−3 = 4.8 × 10−8 (per unit substrate). SN1 term = 2.4 × 10−6. % SN2 = 4.8 × 10−8/(4.8 × 10−8 + 2.4 × 10−6) × 100 = 1.96 ≈ 2.

Answer (from key): Two.

Teacher's Note: The term containing [OH⁻] is SN2, the other is SN1; take the SN2 share of total rate.

Exam Note: Substitute [OH⁻] before taking the percentage.

Question Single Integer Answer Problem 23. A certain substance A is mixed with an equal amount of B. At the end of 1 hr, A is 70% reacted. How much % of A will be left unreacted at the end of 2.5 hr, if the reaction with respect to A is of I order?

Solution. After 1 hr, 30% is left, so e−K·1 = 0.3. At 2.5 hr: fraction left = 0.32.5 = 0.0493, i.e. 4.93% ≈ 5%.

Answer (from key): Five.

Teacher's Note: First-order: fraction left after time t is (fraction left in 1 hr) raised to t.

Exam Note: Answer is in percent left, not reacted.

Question Single Integer Answer Problem 24. The rate of reaction depends on concentration as −dCA/dt = K1CA/(1 + K2CA). If CA being very high, then order of reaction is ......

Solution. For large CA, 1 + K2CA ≈ K2CA, so rate ≈ K1/K2, a constant independent of CA: zero order.

Answer (from key): Zero.

Teacher's Note: At high concentration the denominator cancels C_A, giving zero order.

Exam Note: State the limiting approximation used.

Question Single Integer Answer Problem 25. A chemical reaction occurs in three paths having rate constants K1, K2 and K3 respectively. If Ea1, Ea2 and Ea3 are 5, 4, 8 kJ respectively and overall rate constant K = K1K3/K2. Assuming Aav = A1A3/A2 the overall energy of activation in kJ is ......

Solution. K = Ae−E/RT with K = K1K3/K2, so the exponents combine: E = Ea1 + Ea3 − Ea2 = 5 + 8 − 4 = 9 kJ.

Answer (from key): Nine.

Teacher's Note: Multiplying constants adds activation energies; dividing subtracts.

Exam Note: Take logs of the Arrhenius form.

Question Single Integer Answer Problem 26. t99.6% = t1/2 × a; the value of a is ......

Solution. 99.6% decay leaves 0.4% = 1/250 of reactant, close to (1/2)8 = 1/256 (99.6%). So 8 half-lives are required: a = 8.

Answer (from key): Eight.

Teacher's Note: Fraction left 1/256 corresponds to eight half-lives.

Exam Note: Check 2⁸ = 256.

Question Single Integer Answer Problem 27. Half-life of a reactant was found to be 9 hours, when 1.0 M reactant was allowed to carry out reaction. If 0.5 M reactant was taken then half-life was found 45 hours. The order of reaction is ......

Solution. Corrected: the key gives Zero, which fits a half-life of 4.5 hours for 0.5 M (t1/2 ∝ a for zero order; half the concentration gives half the half-life). With 45 hours exactly as printed, t1/2 ∝ a1−n gives 2n−1 = 5, n = 1 + log25 ≈ 3.3, which is not a whole number, so the printed '45' is almost certainly a misprint for 4.5. Answer (from key): zero order.

Answer (from key): Zero.

Teacher's Note: Compare half-lives at two concentrations; the printed 45 h looks like a misprint of 4.5 h.

Exam Note: Use t½ ∝ a^(1−n) with both data.

Question Single Integer Answer Problem 28. For a consecutive I order reaction of both the steps A → B → C (rate constants K1, K2). If 20 M of A are taken and K2 = 2K1, the maximum concentration of B will be ...... M

Solution. [B]max = [A]0(K1/K2)K2/(K2 − K1) = 20 × (1/2)2K1/K1 = 20 × (1/2)2 = 5 M.

Answer (from key): Five.

Teacher's Note: Use the maximum-intermediate formula with exponent K2/(K2 − K1).

Exam Note: Quote the formula before substituting.

Question Single Integer Answer Problem 29. Two first order reaction involving reactants A and B have the same frequency factor and activation energy of A is 10.46 kJ more than B. If A dissociates 30% in 60 minute at 100°C, the time taken in minute to dissociate 70% at the same temperature.

Solution. KA = (2.303/60) log(100/70) = 5.95 × 10−3 min−1. KA/KB = e−10460/(8.314 × 373) = 0.0343, so KB = 0.173 min−1. For B (70% dissociation): t = (2.303/0.173) log(100/30) = 6.95 ≈ 7 min.

Answer (from key): Seven.

Teacher's Note: Same A factor means KA/KB = exp(−ΔEa/RT); find KB, then time for 70% of B.

Exam Note: Read the question as asking time for B.

Question Single Integer Answer Problem 30. The rate of gaseous reaction expressed by r = K[A][B]. If pressure of gas A and B are doubled at the same conditions, the rate of reaction will be increased by ...... times.

Solution. Doubling pressure doubles each concentration, so rate becomes 2 × 2 = 4 times.

Answer (from key): Four.

Teacher's Note: Gas concentration is proportional to pressure; rate is second order overall.

Exam Note: Both reactants double, so factors multiply.

Question Single Integer Answer Problem 31. 10 mole of a radioactive element undergoes decay follow I order to give three products B, C and D with rate constant 0.002, 0.003 and 0.00193 sec−1 respectively. How much mole are decayed in 100 sec?

Solution. K = 0.002 + 0.003 + 0.00193 = 0.00693 sec−1. Kt = 0.693, so N = 10e−0.693 = 5 mol remain. Decayed = 10 − 5 = 5 mol.

Answer (from key): Five.

Teacher's Note: Parallel first-order paths: use the sum of rate constants; Kt = 0.693 means one half-life.

Exam Note: Report moles decayed, not remaining.

Question Single Integer Answer Problem 32. For a given reaction A → B, temperature coefficient is constant. If K55°C/K25°C = 8 what is the value of K65°C/K35°C in nearest possible integer. K is rate constant.

Solution. A 30°C interval gives a factor of 8, i.e. (temperature coefficient)3 = 8, so the coefficient is 2 per 10°C. K65/K35 also spans 30°C, so it is again 8.

Answer (from key): Eight.

Teacher's Note: Constant temperature coefficient: the ratio depends only on the size of the interval.

Exam Note: Both ratios span the same 30°C.

Question Single Integer Answer Problem 33. The rate of decomposition of HI is given by; rate = K[HI]2. The rate constant K is 1 × 10−6 litre mol−1sec−1 at 600 K. Find out the number of moles of HI × 10−10 decomposed in first second when HI sample is taken in 1 litre container at 1 atm pressure.

Solution. [HI] = P/RT = 1/(0.0821 × 600) = 0.0203 mol L−1. Rate = 10−6 × (0.0203)2 = 4.1 × 10−10 mol L−1 s−1. In a 1 L container, about 4 × 10−10 mol decompose in the first second.

Answer (from key): Four.

Teacher's Note: Get concentration from P/RT, then apply the second-order rate law for the first second.

Exam Note: Container is 1 L, so mol/L equals mol.

Question Single Integer Answer Problem 34. The concentration of R in the reaction R → P was measured as a function of time and the following data is obtained. [R] (molar): 1.0, 0.75, 0.40, 0.10 at t (min.): 0.0, 0.05, 0.12, 0.18. The order of reaction is : (IIT 2010)

Solution. Check Δ[R]/Δt: (0.75 − 1.0)/0.05 = −5; (0.40 − 0.75)/0.07 = −5; (0.10 − 0.40)/0.06 = −5. The rate is constant at 5 M min−1, independent of concentration: zero order.

Answer (from key): Zero.

Teacher's Note: Constant rate of fall of concentration means zero order.

Exam Note: Test slopes between successive points.

Question Single Integer Answer Problem 35. An organic compound undergoes first-order decomposition. The time taken for its decomposition to 1/8 and 1/10 of its initial concentration are t1/8 and t1/10 respectively. What is the value of [t1/8]/[t1/10] × 10? (take log10 2 = 0.3) (IIT 2012)

Solution. t = (2.303/K) log(C0/C). t1/8/t1/10 = log 8/log 10 = 3 × 0.3/1 = 0.9. Multiplying by 10 gives 9.

Answer (from key): Nine.

Teacher's Note: Ratio of first-order times equals ratio of logs of the concentration drops.

Exam Note: Use log 8 = 3 log 2.

Objective Problems (One Answer Correct)

Question Objective Problem 1. The rate of combination of free radicals :

(a) increases with increase in temperature (b) decreases with increase in temperature (c) dependent of temperature (d) altogether different for different reactions and independent of temperature

Solution. r = K[ ]n and K = Ae−Ea/RT. Ea = 0 for free radical combination, so K is constant with T.

Answer (from key): (d) altogether different for different reactions and independent of temperature.

Teacher's Note: Radical combination has zero activation energy, so K does not change with temperature.

Exam Note: Ea = 0 means no temperature dependence.

Question Objective Problem 2. A consecutive reaction P →(K1) Q →(K2) R leads to :

(a) maxima in [P] if K1 > K2 (b) maxima in [Q] if K1 > K2 (c) maxima in [Q] if K1 < K2 (d) maxima in [P] if K1 < K2

Solution. [R] can be maximum only if its decay is slower than P, i.e., K2 < K1. (Intermediate Q builds up to a maximum when it is formed faster than it is consumed.)

Answer (from key): (b) maxima in [Q] if K1 > K2.

Teacher's Note: The intermediate peaks only when its formation rate constant exceeds its consumption rate constant.

Exam Note: Maximum belongs to the intermediate Q.

Question Objective Problem 3. At the intersection point of two curves nA → mB, the concentration of B can be given by assume I order :

(a) (m/(m+n))[A]0 (b) (m/n)[A0] (c) (m/(m−n))[A0] (d) (n/(m+n))[A0]

Solution. Figure (described): concentration against time; [A] falls from [A]0 and [B] rises, the curves crossing once. [A]left = [B]formed × (n/m), and [B]formed = (m/n)[A]decayed. At the crossing [A]left = [B]: [A]0e−λt = (m/n)[1 − e−λt][A]0, so ne−λt = m − me−λt and e−λt = m/(m+n). Then [B]formed = (m/n)[1 − m/(m+n)][A]0 = (m/n)·(n/(m+n))[A]0 = (m/(m+n))[A]0.

Answer (from key): (a) (m/(m+n))[A]0.

Teacher's Note: At the crossing [A] = [B]; combine stoichiometry n:m with first-order decay.

Exam Note: Equate [A] left with [B] formed.

Question Objective Problem 4. Select the incorrect statement :

(a) Half-life period of all reactions decreases with increase in temperature. (b) Half life period of I order reaction is always constant. (c) Higher is rate constant of a reaction, lesser will be its energy of activation. (d) Rate of reaction whether exothermic or endothermic usually increases with temperature.

Solution. K = Ae−Ea/RT. K depends upon Ea, T and nature of reaction, but always increases with T. Thus rate always increases with T. So a higher K does not by itself mean a lower Ea: statement (c) is incorrect.

Answer (from key): (c) Higher is rate constant of a reaction, lesser will be its energy of activation..

Teacher's Note: K depends on Ea, T and the frequency factor; K alone does not fix Ea.

Exam Note: Check for hidden 'only if' conditions.

Question Objective Problem 5. The rate constants of three reactions involving reactant A only obeying I, II, III order respectively is same. Which of the following is true ?

(a) r3 > r2 > r1 if [A] > 1 (b) r1 > r2 > r3 if [A] < 1 (c) r1 = r2 = r3 if [A] = 1 (d) All of these

Solution. r1 = K[A]1; r2 = K[A]2; r3 = K[A]3. For [A] > 1 higher powers are larger, for [A] < 1 they are smaller, and for [A] = 1 all are equal. All three statements are true.

Answer (from key): (d) All of these.

Teacher's Note: Compare K[A]^n for concentration above, below and equal to 1.

Exam Note: Check each of the three cases.

Question Objective Problem 6. loge K vs. 1/T plots shows a straight line having slope of 120° and intercepts on the Y-axis of 2, then :

(a) Ea = 8.0 cal, A = 100 (b) Ea = 8.0 cal, A = 2 (c) Ea = 3.46 cal, A = 7.38 (d) Ea = 3.46 cal, A = 100

Solution. ln K = ln A − Ea/RT. Intercept = ln A = 2, so A = e2 = 7.38. Also −Ea/R = tan 120° = −1.73, so Ea = 1.73 × 2 cal = 3.46 cal.

Answer (from key): (c) Ea = 3.46 cal, A = 7.38.

Teacher's Note: The Y-intercept is ln A and the slope is −Ea/R; tan 120° = −1.73.

Exam Note: Intercept gives ln A, not A.

Question Objective Problem 7. The temperature coefficients of two reactions are 2 and 3 respectively. Which would be correct for these reactions?

(a) Ea1 < Ea2 (b) Ea1 > Ea2 (c) Ea1 = Ea2 (d) Nothing can be said

Solution. Temperature coefficients: I. K1′/K1 = (Ea1/2.303R)·[(T2 − T1)/T1T2] (log form) = 2; II. K2′/K2 similarly with Ea2 = 3. For the same temperature rise a larger ratio means a larger Ea, so Ea1 < Ea2.

Answer (from key): (a) Ea1 < Ea2.

Teacher's Note: Higher temperature coefficient corresponds to higher activation energy.

Exam Note: Compare through the Arrhenius ratio.

Question Objective Problem 8. A reaction occurs in three rate determining steps having rate constants K1, K2 and K3 respectively and arrhenius factor A1, A2, A3 respectively. The overall rate constant K = K1K2/K3. If energy of activations for each step is Ea1, Ea2 and Ea3 respectively, then overall energy of activation is :

(a) Ea1 + Ea2 + Ea3 (b) Ea1 × Ea2/Ea3 (c) Ea1 + Ea2 − Ea3 (d) K3[Ea1/K2 + Ea2/K1 + K3Ea3/(K1K2)]

Solution. K = K1K2/K3 = (A1A2/A3)·e−(Ea1/RT + Ea2/RT − Ea3/RT) = Aav·e−Ea/RT. ∵ Ea = Ea1 + Ea2 − Ea3.

Answer (from key): (c) Ea1 + Ea2 − Ea3.

Teacher's Note: Products of K add Ea values in the exponent, quotients subtract.

Exam Note: Multiply exponentials, add exponents.

Question Objective Problem 9. For a I order reaction −d[A]/dt = K[A]0. The reaction is carried out by taking 100 mol litre−1 of A, then concentration of A decayed after time 1/K is :

(a) 53.21 mol litre−1 (b) 36.79 mol litre−1 (c) 61.21 mol litre−1 (d) 26.79 mol litre−1

Solution. [A] = [A]0e−Kt = 100·e−K/K = 100/e = 100/2.718 = 36.79 mol litre−1. The book then writes [A]decayed = 61.21 and marks (c). Corrected: [A]decayed = 100 − 36.79 = 63.21 mol litre−1; this value is not among the options, so the printed key letter (c) 61.21 is the nearest option but the arithmetic in the book is wrong.

Answer (from key): (c) 61.21 mol litre−1.

Teacher's Note: Time 1/K leaves 1/e of A; decayed amount is 100 minus that.

Exam Note: Decayed, not remaining, is asked.

Question Objective Problem 10. For two I order reactions : A → B; K1 = 1015e−2×103/T and C → D; K2 = 1014e−103/T. The temperature at which both have same rate if [A] = [C] is made initially :

(a) 707.2°C (b) 434.2°C (c) 727°C (d) 707.2 K

Solution. r1 = K1[A], r2 = K2[C]; r1 = r2 and [A] = [C], so K1 = K2: log K1 = 15 − 2000/(2.303T); log K2 = 14 − 1000/(2.303T). Equating: 1 = 1000/(2.303T), so T = 1000/2.303 = 434.22 K. Corrected: the book prints key (a), but the working gives 434.2 K (= 161.2°C), which matches none of the options exactly; the nearest option by number is (b) 434.2 (written there as °C instead of K).

Answer (from key): (a) 707.2°C.

Teacher's Note: Equal rates with equal concentrations mean K1 = K2; solve for T in kelvin.

Exam Note: Check units: the result is in kelvin.

Question Objective Problem 11. H2O and oxygen atoms react in upper atmospheric level bimolecularly to form two OH radicals having heat of reaction 72 kJ at 400 K and energy of activation being 77 kJ mol−1. Ea for bimolecular combination of two OH radicals to form H2O and O-atom is :

(a) − 5 kJ (b) + 5 kJ (c) − 10 kJ (d) + 10 kJ

Solution. H2O + O ⇌ 2OH: Ea(f) = 77 kJ, ΔH = 72 kJ. Reverse 2OH → H2O + O: ΔH = −72 kJ. Ea(f) − Ea(b) = ΔH, so for the reverse reaction Ea = 77 − 72 = +5 kJ.

Answer (from key): (b) + 5 kJ.

Teacher's Note: Reverse activation energy equals forward Ea minus ΔH of the forward reaction.

Exam Note: Use Ea(f) − Ea(b) = ΔH.

Question Objective Problem 12. The rate of appearance of NO2 (in atm m−1) following the reaction, N2O4 → 2NO2 when initial pressure of N2O4 is reduced from 0.50 atm to 0.25 atm in 5 minutes is :

(a) 0.1 (b) 0.2 (c) 0.25 (d) 0.3

Solution. r = −d[N2O4]/dt = (0.50 − 0.25)/5 = 0.25/5 = 0.05 atm min−1. ∴ d[NO2]/dt = 2 × 0.05 = 0.1 atm min−1.

Answer (from key): (a) 0.1.

Teacher's Note: Rate of appearance of NO₂ is twice the rate of disappearance of N₂O₄.

Exam Note: Apply the coefficient 2.

Question Objective Problem 13. At 3 km altitude, water boils at 90°C and 300 seconds are taken to cook a '3 minute egg'. The temperature coefficient for the process of cooking is :

(a) 2.66 (b) 1.66 (c) 3.66 (d) 0.6

Solution. Temperature coefficient = K373/K363 = (t)363/(t)373 = 300/180 = 1.66 (K ∝ 1/t).

Answer (from key): (b) 1.66.

Teacher's Note: Rate constant is inversely proportional to cooking time; the ratio is for a 10° rise.

Exam Note: Use K ∝ 1/t with 180 s and 300 s.

Question Objective Problem 14. The rate constant, the energy of activation and the Arrhenius parameter of a chemical reactions at 25°C are 3.0 × 10−4 sec−1, 104.4 kJ mol−1 and 6.0 × 1014 sec−1 respectively. The value of rate constant as T → ∞ is :

(a) 2.0 × 1018 sec−1 (b) 6.0 × 1014 sec−1 (c) infinity (d) 3.6 × 1030 sec−1

Solution. K = Ae−Ea/RT. As T → ∞, e−Ea/RT → 1, so K = A = 6.0 × 1014 sec−1.

Answer (from key): (b) 6.0 × 1014 sec−1.

Teacher's Note: At infinite temperature the exponential factor tends to 1, so K equals A.

Exam Note: Limit of the Arrhenius expression.

Question Objective Problem 15. Select the incorrect statement :

(a) Rate of exothermic reactions increases with increase in temperature. (b) Alkaline hydrolysis of ester is irreversible reaction. (c) For N2 + 3H2 ⇌ 2NH3; if rate of formation of NH3 is 0.001 kg hr, than rate of consumption of H2 is 0.0015 kg/hr. (d) In Arrhenius equation: K = Ae−Ea/RT; if T → ∞, K = A

Solution. −(1/3)d[H2]/dt = (1/2)d[NH3]/dt, so −d[H2]/dt = (3/2) × 0.001/(17 × 10−3) mol/hr = (3/2) × (0.001/(17 × 10−3)) × 2 g/hr = 1.76 × 10−4 kg/hr. So statement (c) is incorrect.

Answer (from key): (c) For N2 + 3H2 ⇌ 2NH3; if rate of formation of NH3 is 0.001 kg hr, than rate of consumption of H2 is 0.0015 kg/hr..

Teacher's Note: Convert kg to moles before applying the 3:2 mole ratio.

Exam Note: Compare in moles, not in mass.

Question Objective Problem 16. A consecutive reaction : A →(K1) B →(K2) C shows a :

(a) Maxima in the concentration of A (b) Maximum in the concentration of B (c) Maxima in the concentration of C (d) None of the above

Solution. Maximum in the concentration of B (the intermediate).

Answer (from key): (b) Maximum in the concentration of B.

Teacher's Note: The intermediate in a consecutive reaction rises to a maximum and then falls.

Exam Note: A and C are monotonic.

Question Objective Problem 17. For the unimolecular reaction A → B, the figure given below shows that at the time t curves represents : (figure: concentration axis marked 0 to 6, curves of A and B crossing at time t.) Thus t is :

(a) t1/3 (b) t1/2 (c) t2/3 (d) t1/4

Solution. Figure (described): the vertical axis is marked 0 to 6 (initial A = 6); the falling curve of A and the rising curve of B intersect at time t. Two moles of A are decayed out of six in time t, i.e. one third decayed, so t = t1/3.

Answer (from key): (a) t1/3.

Teacher's Note: Read the decayed fraction off the figure: 2 of 6 means one third.

Exam Note: Fraction decayed names the subscript.

Question Objective Problem 18. If c is the concentration of n mole of gas at pressure P and temperature T, then for the ideal gas reaction, the rate of reaction can be given by:

(a) −d[A]/dt (b) −(1/RT)(dP/dt) (c) −(1/V)(dn/dt) (d) either of these

Solution. The rate of reaction = −dc/dt = −(1/V)(dn/dt) = −(1/RT)(dP/dt), since c = n/V = P/RT. So either form can be used.

Answer (from key): (d) either of these.

Teacher's Note: For an ideal gas c = P/RT = n/V, so rate may be written with n, P or c.

Exam Note: Convert between c, n and P.

Question Objective Problem 19. Decomposition of HI on gold surface is zero order reaction. Which of the following graph correctly represents this reaction ? (options (a)–(d) are graphs of P against time for HI and H2; not redrawn)

(a) graph (a) (b) graph (b) (c) graph (c) (d) graph (d)

Solution. For zero order reaction: PHI = P0HI − Kt, a straight line falling with time. Also PH2 continuously increases. Graph (b) shows this.

Answer (from key): (b) graph (b).

Teacher's Note: Zero order gives a linear fall of HI pressure, with H₂ pressure rising.

Exam Note: Linear decay marks zero order.

Question Objective Problem 20. The reaction A → B + C has rate constant 1 × 10−3 Ms−1. If one starts the reaction with one mole of A then t1/2 and completion of reaction time would be:

(a) 1000 s, 500 s (b) 500 s, 1000 s (c) 750 s, 400 s (d) 400 s, 800 s

Solution. The unit Ms−1 shows zero order. t1/2 = [A]0/2K = 1/(2 × 10−3) = 500 s, and completion time = [A]0/K = 1/10−3 = 1000 s.

Answer (from key): (b) 500 s, 1000 s.

Teacher's Note: Unit M s⁻¹ identifies zero order; t½ = a/2K and completion time a/K.

Exam Note: Identify order from the unit first.

Question Objective Problem 21. The half of a gaseous compound (A(g) → B(s)) initially at 2 atm is 200 sec. If the initial pressure is taken as 1 atm, the half life reduces to 100 sec. The order of reaction is:

(a) 0 (b) 1 (c) 2 (d) 3

Solution. t1/2 ∝ (P)1−n: 200 ∝ 21−n, 100 ∝ 11−n. So 2 = 21−n, 1 = 1 − n, and n = 0.

Answer (from key): (a) 0.

Teacher's Note: Half-life halves when pressure halves: it is proportional to initial pressure.

Exam Note: Use t½ ∝ P^(1−n).

Question Objective Problem 22. Which one is incorrect statement?

(a) Always Ea > ΔH for an endothermic reaction. (b) Eb < ΔH for an endothermic reaction. (c) Ea ⋛ ΔH for an exothermic reaction. (d) Always Ea < ΔH for an exothermic reaction.

Solution. Ea − Eb = ΔH. In an exothermic reaction Ea may be greater than, equal to or less than ΔH in magnitude depending upon the nature of the reaction, so 'always Ea < ΔH' is incorrect.

Answer (from key): (d) Always Ea < ΔH for an exothermic reaction..

Teacher's Note: Ea − Eb = ΔH; for exothermic reactions Ea can lie on either side of ΔH.

Exam Note: Watch the word 'always'.

Question Objective Problem 23. For a I order reaction which one is not correct?

(a) The concentration of product increases linearly with time (b) The concentration of product increases exponentially with time (c) The degree of dissociation 'α' is given by 1 − e−kt (d) The reaction never goes for completion

Solution. x = a(1 − e−Kt): the product concentration rises as a curve that levels off, not linearly. (Figure: x against t, a rising curve approaching a limit.)

Answer (from key): (a) The concentration of product increases linearly with time.

Teacher's Note: Product concentration of a first-order reaction follows a(1 − e^(−kt)), a saturating curve.

Exam Note: Linear growth belongs to zero order.

Question Objective Problem 24. Select the incorrect statement:

(a) A spontaneous reaction is not necessarily a fast reaction. (b) Larger the activation energy, greater is the effect on rate constant with rise in temperature. (c) The reactivity of bromine is more in liquid state than in vapour state. (d) Reactions with low energy of activation are fast.

Solution. Vapour state of Br2 is more reactive as it possesses higher energy level and more collision frequency, so statement (c) is incorrect.

Answer (from key): (c) The reactivity of bromine is more in liquid state than in vapour state..

Teacher's Note: Gaseous bromine has higher energy and collision frequency than liquid.

Exam Note: Spontaneity does not fix speed.

Question Objective Problem 25. For the process 2O3 → 3O2, mechanism is: O3 ⇌ O2 + O (fast); O + O3 → 2O2 (slow). The rate law is:

(a) r = k[O3]2 (b) r = k[O3]2·[O2]−1 (c) r = k[O3]·[O2] (d) r = k[O3]2·[O2]−3

Solution. Slow step: r = K[O3][O]. From the fast equilibrium Kc = [O2][O]/[O3], so [O] = Kc[O3]/[O2]. ∴ r = K[O3]2[O2]−1.

Answer (from key): (b) r = k[O3]2·[O2]−1.

Teacher's Note: Rate follows the slow step; remove the intermediate O using the fast equilibrium.

Exam Note: Express the intermediate through K_c.

Question Objective Problem 26. The rate constant of a reaction depends on :

(a) temperature (b) initial concentration of the reactants (c) time of reaction (d) extent of reaction

Solution. K = Ae−Ea/RT, so the rate constant depends on temperature only (among the choices).

Answer (from key): (a) temperature.

Teacher's Note: Rate constant changes with temperature, not with concentration or time.

Exam Note: Arrhenius equation settles it.

Question Objective Problem 27. The specific rate constant of a first order reaction depends on:

(a) concentration of the reactant (b) concentration of the product (c) time required to complete half of the reaction (d) none of these

Solution. K = 0.693/t1/2: K is related to t1/2 but does not depend on concentrations or on the time elapsed; none of (a), (b), (c) is a dependence.

Answer (from key): (d) none of these.

Teacher's Note: K is fixed by the reaction and temperature, not by concentration.

Exam Note: Distinguish relation from dependence.

Question Objective Problem 28. For an endothermic reaction ΔH represents enthalpy of the reaction, the minimum value of the energy of activation will be:

(a) less than ΔH (b) zero (c) more than ΔH (d) equal to ΔH

Solution. Figure (described): energy against time with a hump above the reactant level, the product level higher by ΔH. For an endothermic reaction Ea > ΔH (the barrier is above the product level); for exothermic reactions Ea may be >, < or = ΔH.

Answer (from key): (c) more than ΔH.

Teacher's Note: The forward barrier lies above the product energy level in an endothermic reaction.

Exam Note: Ea ≥ ΔH for endothermic.

Question Objective Problem 29. The rate constant, the activation energy and the Arrhenius parameter of a chemical reaction at 25°C are 3.0 × 10−4 s−1, 104.4 kJ mol−1 and 6.0 × 1014 s−1 respectively. The value of the rate constant as T → ∞ is,

(a) 2.0 × 1018 s−1 (b) 6.0 × 1014 s−1 (c) infinity (d) 3.6 × 1030 s−1

Solution. K = Ae−Ea/RT; at T → ∞, K = A = 6.0 × 1014 s−1.

Answer (from key): (b) 6.0 × 1014 s−1.

Teacher's Note: Same limit as before: the exponential tends to 1.

Exam Note: K → A as T → ∞.

Question Objective Problem 30. The variation of rate constant K for a given reaction with temperature is given by the expression : ln KT = ln K0 + (ln 3/10)T. The value of temperature coefficient is :

(a) 2 (b) 3 (c) 4 (d) 5

Solution. ln KT1 = ln K0 + (ln 3/10)T1; ln KT2 = ln K0 + (ln 3/10)T2. Subtract: ln(K2/K1) = (ln 3/10)(T2 − T1). For T2 − T1 = 10°, temperature coefficient = K2/K1: ln(K2/K1) = ln 3 so K2/K1 = 3.

Answer (from key): (b) 3.

Teacher's Note: Temperature coefficient is the rate-constant ratio for a 10° rise: substitute ΔT = 10.

Exam Note: Subtract the two ln K equations.

Question Objective Problem 31. Reaction 2A + B →(K) C + D, shows first order with respect to A and second order with respect to B. The reaction was allowed with molarity a0 M of A and 2a0 M of B at t = 0. If after time t = 30 minute the molarity of C was a0/4, the rate of reaction after 30 minutes can be written as :

(a) r = 7Ka03/16 (b) r = 27Ka03/32 (c) r = 247Ka03/64 (d) r = 49Ka03/32

Solution. After 30 min: C formed = a0/4, so A reacted = a0/2 and B reacted = a0/4. [A] = a0 − a0/2 = a0/2 and [B] = 2a0 − a0/4 = 7a0/4. Rate = K[A][B]2 = K·(a0/2)·(7a0/4)2 = K·(a0/2)(49a02/16) = 49Ka03/32.

Answer (from key): (d) r = 49Ka03/32.

Teacher's Note: Use stoichiometry 2A:1B:1C to find A and B left, then apply the given orders.

Exam Note: A uses twice as much as C formed.

Question Objective Problem 32. The rate expression for a reaction is −dc/dt = αc/(1 + βc) (α and β > 0). The half life of the reaction can be given by :

(a) (1/α)ln 2 + βc0 (b) (1/α)[ln 2 + βc0/2] (c) ln 2 + βc0/2 (d) ln 2 + βc0/(2α)

Solution. −dc(1 + βc)/c = α·dt, so −dc/c − β·dc = α·dt. Integrating from c0 to c: ln(c0/c) + β(c0 − c) = αt. At t = t1/2, c = c0/2: ln 2 + βc0/2 = αt1/2, so t1/2 = (1/α)[ln 2 + βc0/2].

Answer (from key): (b) (1/α)[ln 2 + βc0/2].

Teacher's Note: Separate variables, integrate, and put c = c₀/2.

Exam Note: Integrate both terms of the separated equation.

Question Objective Problem 33. Rate constant for nth order reaction is given by K·t = (1/(n−1))[CA1−n − C01−n]. Thus, for a reaction of nth order, the ratio of t1/2/t3/4 is :

(a) 2n (b) 2n−1 (c) 21−n (d) (2n−1 − 1)/(4n−1 − 1)

Solution. −dCA/dt = KCAn, integrate to Kt = (1/(n−1))[CA1−n − C01−n]. For CA = C0/2: Kt1/2 = (C01−n/(n−1))[2n−1 − 1]. For CA = C0/4: Kt3/4 = (C01−n/(n−1))[4n−1 − 1]. Dividing: t1/2/t3/4 = (2n−1 − 1)/(4n−1 − 1).

Answer (from key): (d) (2n−1 − 1)/(4n−1 − 1).

Teacher's Note: Put C = C₀/2 and C₀/4 in the nth-order integrated law and divide.

Exam Note: Common factors cancel in the ratio.

Question Objective Problem 34. With respect to the figure given below which of the following statements is correct? (Figure: PE against reaction path; reactants A at the left, a peak C, and product level B lower than the peak.)

(a) Ea for the forward reaction is C − B (b) Ea for the forward reaction is B − A (c) Ea(forward) < Ea(backward) (d) Ea (for reverse reaction) = C − A

Solution. Figure (described): potential energy against reaction path; R at the left, a hump, and P at a lower level at the right. From the diagram Ea(b) > Ea(f) (the products lie lower, so the backward barrier is higher), hence Ea(forward) < Ea(backward).

Answer (from key): (c) Ea(forward) < Ea(backward).

Teacher's Note: Compare barrier heights measured from reactant level and from product level.

Exam Note: Exothermic profile: backward barrier is larger.

Question Objective Problem 35. A consecutive reaction : A →(K1) B →(K2) C shows a :

(a) maxima in the concentration of A (b) maximum in the concentration of B (c) maxima in the concentration of C (d) none of the above

Solution. Maximum in the concentration of B, the intermediate.

Answer (from key): (b) maximum in the concentration of B.

Teacher's Note: Only the intermediate passes through a maximum in a consecutive first-order sequence.

Exam Note: A falls steadily and C only rises.

Question Objective Problem 36. For the unimolecular reaction A → B, the figure given below shows that at the time t curves represents : (figure: concentration axis marked 0 to 6, the curves of A and B crossing at time t.) Thus t is given by :

(a) t1/3 (b) t1/2 (c) t2/3 (d) t1/4

Solution. Figure (described): concentration axis marked 0 to 6; the falling curve (A) and rising curve (B) meet at time t, with dashed guide lines to the axes. Two moles of A are decayed out of six in time t, i.e. one third, so t = t1/3.

Answer (from key): (a) t1/3.

Teacher's Note: Decayed fraction read from the figure names the time: one third.

Exam Note: t₁/₃ means one third decayed.

Question Objective Problem 37. The rate of a certain reaction depends on concentration according to the equation: −dC/dt = K1C/(1 + K2C). The order of reaction, where (i) concentration is very very high, (ii) very very low will be respectively :

(a) zero, 1 (b) 1, zero (c) 1, 2 (d) 1, 1

Solution. −dC/dt = K1C/(1 + K2C) = K1/(1/C + K2). (i) If C is very very high, 1/C is smallest and thus negligible: −dC/dt = K1/K2 = constant, so the order is zero. (ii) If C is very very low, 1 + K2C ≈ K′ (constant): −dC/dt = K1C/K′ = K″·C, so the order is unity.

Answer (from key): (a) zero, 1.

Teacher's Note: Limit the denominator at high and at low concentration.

Exam Note: High C gives zero order; low C gives first order.

Question Objective Problem 38. The reaction : CO + Cl2 → COCl2 has the following mechanism. (i) Cl2 ⇌ 2Cl (fast, K1, K2); (ii) Cl + CO ⇌ COCl (fast, K′1, K′2); (iii) COCl + Cl2 → COCl2 + Cl (slow, K3). The rate expression will be :

(a) r = K[CO][Cl2] (b) r = K[CO][Cl2]3/2 (c) r = K[CO]2[Cl2] (d) r = [CO]3/2[Cl2]

Solution. By step (iii): d[COCl2]/dt = K3[COCl][Cl2] …(a). Step (i): K1/K2 = [Cl]2/[Cl2] …(b). Step (ii): K′1/K′2 = [COCl]/([CO][Cl]) …(c). From (b) and (c): [COCl] = (K′1/K′2)[CO]√((K1/K2)[Cl2]) …(d). From (a) and (d): d[COCl2]/dt = K3(K′1/K′2)(K1/K2)1/2[CO][Cl2]1/2[Cl2], i.e. d[COCl2]/dt = K[CO][Cl2]3/2.

Answer (from key): (b) r = K[CO][Cl2]3/2.

Teacher's Note: Same as problem 107: eliminate Cl and COCl via the fast equilibria.

Exam Note: Order is 5/2 overall.

Question Objective Problem 39. What will be the order of reaction given below ? NH4CNO → NH2CONH2. If the reaction is completed in three steps as : (i) NH4CNO ⇌ NH4NCO (fast equilibrium); (ii) NH4NCO ⇌ NH3 + H–N=C=O (fast equilibrium); (iii) NH3 + H–N=C=O → NH2CONH2 (slow)

(a) 2 (b) 3 (c) 1 (d) zero

Solution. Rate of formation of urea (slow step): d[urea]/dt = K[NH3][HNCO] …(a). From step (ii): [NH3][HNCO]/[NH4NCO] = KC1; from step (i): [NH4NCO]/[NH4CNO] = KC2. Hence [NH3][HNCO] = KC1KC2[NH4CNO] and d[urea]/dt = K′[NH4CNO]: first order.

Answer (from key): (c) 1.

Teacher's Note: Same method as problem 108; the rate ends up first order in ammonium cyanate.

Exam Note: Rate law from slow step, intermediates removed.

Question Objective Problem 40. The temperature coefficient of a reaction is 2. By what factor, the rate of reaction will increases when temperature is raised by 30°C :

(a) 21 (b) 6 (c) 8 (d) 16

Solution. KT+10/KT = 2, KT+20/KT+10 = 2, KT+30/KT+20 = 2. Multiplying: KT+30/KT = 2 × 2 × 2 = 8.

Answer (from key): (c) 8.

Teacher's Note: Three successive 10° steps each double the rate.

Exam Note: Multiply the factor per 10° step.

Question Objective Problem 41. Select the wrong statement :

(a) Rate of chain reaction involving nascent atoms and free radicals as intermediate depends on shape of the vessel (b) Energy of activation is definitely +ve for unimolecular reactions (c) Reaction having rate independent of concentration, never goes to completion (d) Stoichiometry of reaction does not indicates its order

Solution. Zero order reaction takes place at constant rate and goes for completion, so the statement that a reaction with rate independent of concentration never goes to completion is wrong.

Answer (from key): (c) Reaction having rate independent of concentration, never goes to completion.

Teacher's Note: A zero-order rate is constant until the reactant is exhausted.

Exam Note: Zero-order reactions do go to completion.

Question Objective Problem 42. The trans → cis isomerisation of 1,2-dichloroethylene proceeds with an activation energy of 55.5 kcal mol−1. The heat of reaction at constant pressure for above is 1.0 kcal mol−1. The activation energy for cis → trans transformation of 1,2-dichloroethylene is :

(a) 56.5 (b) 54.5 (c) 55.5 (d) none of these

Solution. ΔH = Eaf − Eab, so Eab = Eaf − ΔH = 55.5 − 1.0 = 54.5 kcal mol−1.

Answer (from key): (b) 54.5.

Teacher's Note: Reverse activation energy is forward Ea minus ΔH.

Exam Note: Keep the sign of ΔH.

Question Objective Problem 43. The energy of activation for a reaction is 25 kJ mol−1. To what temperature should it be raised from 300 K in order that the reaction rate increases 10 times.

(a) 389.5 K (b) 489.5 K (c) 289.5 K (d) none of these

Solution. 2.303 log(KT/K300) = (Ea/R)[(T2 − T1)/(T1T2)]: 2.303 log 10 = (25 × 103/8.314)[(T2 − 300)/(T2 × 300)]. Solving gives T2 = 389.5 K.

Answer (from key): (a) 389.5 K.

Teacher's Note: Arrhenius two-temperature equation with ratio 10, solved for T₂.

Exam Note: Use kelvin and E in J.

Question Objective Problem 44. For the reaction RX + OH− → ROH + X− at 50°C the rate expression is given as : rate = 4.7 × 10−5[RX][OH−] + 0.24 × 10−5[RX]. What percentage of RX reacts by the SN2 mechanism when [OH−] = 0.001 M is :

(a) 0.192 (b) 0.0192 (c) 19.2 (d) 1.92

Solution. The two paths are SN1 (RX → R+ + X−, then OH−) and SN2 (RX + OH− → HO---R---X− → HOR + X−). % SN2 = rSN2/(rSN1 + rSN2) × 100 = [4.7 × 10−5(0.001)]/[0.24 × 10−5 + 4.7 × 10−5(0.001)] × 100 = 1.92.

Answer (from key): (d) 1.92.

Teacher's Note: The [OH⁻] term is SN2 and the other term SN1; find the SN2 share.

Exam Note: Substitute [OH⁻] = 0.001 first.

Question Objective Problem 45. For a given reaction A → Product, the graph plotted between log t1/2 vs. log [A] leads to an angle of 315°. The order of reaction is :

(a) 0 (b) 1 (c) 2 (d) 3

Solution. t1/2 ∝ [A]1−n, so log t1/2 = log K + (1 − n) log [A]. Slope: 1 − n = tan 315° = −1, hence n = 2.

Answer (from key): (c) 2.

Teacher's Note: Slope of log t½ against log [A] is 1 − n; tan 315° = −1.

Exam Note: tan 315° = −1.

Question Objective Problem 46. Find out ratio of two rates r1/r2 shown for the elementary reaction A(g) + 2B(g) → C(g) + D(g), with PA and PB: r1 for case I 6 atm, 8 atm; r2 for case II 6 atm, 2 atm.

(a) 8 (b) 16 (c) 32 (d) 64

Solution. Elementary reaction: r = K(PA)(PB)2. Case I: r1 = K × 6 × 82 = 384K. Case II: r2 = K × 6 × 22 = 24K. ∴ r1/r2 = 384K/24K = 16.

Answer (from key): (b) 16.

Teacher's Note: Elementary step: exponents are the stoichiometric coefficients, so B appears squared.

Exam Note: Rate law from coefficients.

Question Objective Problem 47. Reactants A and B shows I order decomposition individually. If [A0] = 8[B0] and t1/2 for A and B are 10 and 20 minutes respectively then if both starts decomposing at the same time, after how much minute the concentration of both A and B will be same :

(a) 20 (b) 40 (c) 60 (d) 80

Solution. N0A/NA = eKAt and N0B/NB = eKBt. Given N0B = N0A/8 and NA = NB after time t: 8 = e(KA − KB)t. ln 8 = [KA − KB]t = [0.693/10 − 0.693/20]t, so 2.08 = (0.693/20)t and t = 2.08 × 20/0.693 = 60 minutes.

Answer (from key): (c) 60.

Teacher's Note: Equate A₀e^(−kAt) = B₀e^(−kBt) and solve for t with k = 0.693/t½.

Exam Note: ln 8 = 3 ln 2 gives a quick check.

Question Objective Problem 48. Mechanism of a hypothetical reaction X2 + Y2 → 2XY is given below : (i) X2 → X + X (fast); (ii) X + Y2 ⇌ XY + Y (slow); (iii) X + Y → XY (fast). The overall order of the reaction will be :

(a) 1 (b) 2 (c) 0 (d) 1.5

Solution. The book prints key (b) but gives two solutions that disagree with it. Solution 1 (steady state, since a slow reversible step makes the rate-determining-step method inapplicable): with d[X]/dt = 0 and d[Y]/dt = 0 one gets k2[X][Y2] = k3[Y][XY] + k4[X][Y] and r = 2k1[X2]1: order 1. Solution 2: step (ii) is slow, r = k[X][Y2]; X from the fast equilibrium (i), K = [X]2/[X2], [X] = (K[X2])1/2, so r = k[Y2][K[X2]]1/2: order 1.5 (d). Corrected: the key letter (b) (order 2) matches neither working; the standard fast-equilibrium treatment gives order 1.5, option (d).

Answer (from key): (b) 2.

Teacher's Note: Slow step fixes the rate law; the fast first step gives [X] from its equilibrium, giving half-order in X₂.

Exam Note: Printed key (b) conflicts with both solutions.

Question Objective Problem 49. A first order reaction has a specific reaction rate of 10−2 sec−1. How much time will it take for 20 g of the reactant to reduce to 5 g?

(a) 238.6 sec (b) 138.6 sec (c) 346.5 sec (d) 693.0 sec

Solution. K = 10−2 = 0.693/t1/2, so t1/2 = 0.693/10−2 = 69.3 sec. Reduction of 20 g to 5 g takes two half-lives, so time required = 2 × 69.3 = 138.6 sec.

Answer (from key): (b) 138.6 sec.

Teacher's Note: 20 g to 5 g is two half-lives; t½ = 0.693/K.

Exam Note: Count half-lives first.

Previous Years Problems

Question Previous Years Problem 1. The rate constant for the reaction; 2N2O5 → 4NO2 + O2 is 3.0 × 10−5 sec−1. If the rate is 2.40 × 10−5 M sec−1, then the concentration of N2O5 (in M) is: (IIT 2000)

(a) 1.4 (b) 1.2 (c) 0.04 (d) 0.8

Solution. r = K[N2O5]; the unit of K (sec−1) shows first order. 2.40 × 10−5 = 3.0 × 10−5[N2O5], so [N2O5] = 2.40/3.0 = 0.8 M.

Answer (from key): (d) 0.8.

Teacher's Note: Unit s⁻¹ means first order, so rate = K[N₂O₅]; divide rate by K.

Exam Note: Use the unit to fix the order.

Question Previous Years Problem 2. If I is the intensity of absorbed light and C is the concentration of AB for the photochemical process AB + hν → ABx, the rate of formation of ABx is directly proportional to : (IIT 2001)

(a) C (b) I (c) I2 (d) C·I

Solution. In photo initiated primary process rate of reaction is directly proportional to intensity of light used. In case of pure solids rate ∝ I (Lambert's law). In case of solution rate ∝ I·C (Beer's law). Key answer: (d).

Answer (from key): (d) C·I.

Teacher's Note: For a solution the absorbed light depends on both intensity and concentration (Beer–Lambert).

Exam Note: Solutions: I × C.

Question Previous Years Problem 3. Consider the chemical reaction; N2(g) + 3H2(g) ⇌ 2NH3(g). The rate of this reaction can be expressed in terms of N2(g), H2(g) and NH3(g) as: (IIT 2002)

(a) Rate = −d[N2]/dt = −(1/3)d[H2]/dt = (1/2)d[NH3]/dt (b) Rate = −d[N2]/dt = −3d[H2]/dt = 2d[NH3]/dt (c) Rate = d[N2]/dt = (1/3)d[H2]/dt = (1/2)d[NH3]/dt (d) Rate = −d[N2]/dt = −d[H2]/dt = d[NH3]/dt

Solution. Divide each rate of change by its stoichiometric coefficient, with a negative sign for reactants: Rate = −d[N2]/dt = −(1/3)d[H2]/dt = (1/2)d[NH3]/dt.

Answer (from key): (a) Rate = −d[N2]/dt = −(1/3)d[H2]/dt = (1/2)d[NH3]/dt.

Teacher's Note: Divide by coefficients; reactants carry a minus sign.

Exam Note: Signs and 1/coefficient both count.

Question Previous Years Problem 4. In a first order reaction, the concentration of reactant decreases from 800 mol/dm3 to 50 mol/dm3 in 2 × 104 sec. The rate constant in sec−1 is : (IIT 2003)

(a) 2 × 104 (b) 3.45 × 10−5 (c) 1.386 × 10−4 (d) 2 × 10−4

Solution. K = (2.303/t) log(C0/C) = (2.303/(2 × 104)) log(800/50) = 1.386 × 10−4 sec−1.

Answer (from key): (c) 1.386 × 10−4.

Teacher's Note: 800 to 50 is a factor 16, four half-lives; apply K = (2.303/t) log(C₀/C).

Exam Note: Four half-lives check the answer.

Question Previous Years Problem 5. The reaction : X → Product, follows first order kinetics. In 40 minutes, the concentration of X changes from 0.1 M to 0.025 M, then rate of reaction when concentration of X is 0.01 M is : (IIT 2004)

(a) 1.73 × 10−4 M/min (b) 3.47 × 10−5 M/min (c) 3.47 × 10−4 M/min (d) 1.73 × 10−5 M/min

Solution. K = (2.303/40) log(0.1/0.025) = 0.0347 min−1. Rate = K[X] = 0.0347 × 0.01 = 3.47 × 10−4 M min−1.

Answer (from key): (c) 3.47 × 10−4 M/min.

Teacher's Note: Find K from the two concentrations, then multiply by the instantaneous concentration.

Exam Note: Rate = K × current concentration.

Question Previous Years Problem 6. Which one of the following statement for order of reaction is not correct? (IIT 2005)

(a) Order can be determined experimentally. (b) Order of reaction is equal to sum of the powers of concentration terms in differential rate law. (c) It is not affected with stoichiometric coefficient of the reactants. (d) Order cannot be fractional.

Solution. Order can be fractional, so statement (d) is not correct.

Answer (from key): (d) Order cannot be fractional..

Teacher's Note: Fractional orders occur in complex reactions, e.g. 3/2 for the HBr-type chain mechanisms.

Exam Note: Order is experimental and may be fractional.

Question Previous Years Problem 7. Ag+ + NH3 ⇌ [Ag(NH3)]+; K1 = 6.8 × 10−3; [Ag(NH3)]+ + NH3 ⇌ [Ag(NH3)2]+; K2 = 1.6 × 10−3; then the formation constant of [Ag(NH3)2]+ is: (IIT 2006)

(a) 6.8 × 10−6 (b) 1.08 × 10−5 (c) 1.08 × 10−6 (d) 6.8 × 10−5

Solution. Ag+ + 2NH3 → [Ag(NH3)2]+; K = K1 × K2 = 6.8 × 10−3 × 1.6 × 10−3 = 1.08 × 10−5.

Answer (from key): (b) 1.08 × 10−5.

Teacher's Note: Overall constant for added steps is the product of step constants.

Exam Note: Multiply, do not add.

Question Previous Years Problem 8. Consider a reaction aG + bH → Products. When concentration of both the reactants G and H is doubled, the rate increases 8 times. However, when concentration of G is doubled keeping the concentration of H fixed, the rate is doubled. The overall order of the reaction is: (IIT 2007)

(a) 0 (b) 1 (c) 2 (d) 3

Solution. r = K[G]a[H]b …(i); 8r = K[2G]a[2H]b …(ii); 2r = K[2G]a[H]b …(iii). By (ii) and (iii): 4 = 2b, so b = 2. By (i) and (ii): 8 = 2a+b = 2a+2, so a = 1. Overall order = a + b = 1 + 2 = 3.

Answer (from key): (d) 3.

Teacher's Note: Vary one reactant at a time to get each order, then add.

Exam Note: Overall order is the sum of orders.

Question Previous Years Problem 9. Under the same reaction conditions, initial concentration of 1.386 mol dm−3 of a substance becomes half in 40 seconds and 20 seconds through I order and zero order kinetics. Ratio (K1/K0) of the rate constants for I order (K1) and zero order (K0) of the reaction is: (IIT 2008)

(a) 0.5 mol−1 dm3 (b) 1.0 mol dm−3 (c) 1.5 mol dm−3 (d) 2.0 mol−1 dm3

Solution. First order: K1 = 0.693/t1/2 = 0.693/40. Zero order: K0 = a/(2t1/2) = 1.386/(2 × 20). ∴ K1/K0 = 0.693/1.386 = 0.5 (units mol−1 dm3).

Answer (from key): (a) 0.5 mol−1 dm3.

Teacher's Note: Use t½ = 0.693/K for first order and a/2K for zero order.

Exam Note: Mind the unit of the ratio.

Question Previous Years Problem 10. For a first order reaction A → P, the temperature (T) dependent rate constant (K) was found to follow the equation: log K = −2000/T + 6.0. The pre-exponential factor A and the activation energy E, respectively are : (IIT 2009)

(a) 1.0 × 106 s−1 and 9.2 kJ mol−1 (b) 6.0 s−1 and 16.66 kJ mol−1 (c) 1.0 × 106 s−1 and 16.66 kJ mol−1 (d) 1.0 × 106 s−1 and 38.3 kJ mol−1

Solution. loge K = −Ea/RT + loge A, or log10 K = −Ea/(RT × 2.303) + log10 A. Hence log10 A = 6, A = 106. Also Ea/(R × 2.303) = 2000, so Ea = 2.303 × 8.314 × 2000 J = 38294.28 J = 38.3 kJ.

Answer (from key): (d) 1.0 × 106 s−1 and 38.3 kJ mol−1.

Teacher's Note: Compare with log K = log A − Ea/(2.303RT): intercept gives A, slope gives Ea.

Exam Note: Do not forget the factor 2.303.

Question Previous Years Problem 11. Plots of variation of rate constant 'K' with temperature (T) are given below. The plot that follows Arrhenius equation is : (IIT 2010) (Four graphs of K against T: (a) K rising with increasing slope, (b) K rising linearly, (c) K falling steeply and levelling off, (d) K falling linearly; not redrawn.)

(a) graph (a) (b) graph (b) (c) graph (c) (d) graph (d)

Solution. Since K = Ae−Ea/RT, K increases exponentially with rise in temperature: graph (a), a curve rising with increasing slope.

Answer (from key): (a) graph (a).

Teacher's Note: K = Ae^(−Ea/RT) rises exponentially with T.

Exam Note: Exponential, not linear, growth.

Question Previous Years Problem 12. The rate of a reaction doubles when its temperature changes from 300 K to 310 K. Activation energy of such a reaction will be : (R = 8.314 JK−1 mol−1 and log102 = 0.301) (JEE (Main) 2013)

(a) 58.5 kJ mol−1 (b) 60.5 kJ mol−1 (c) 53.6 kJ mol−1 (d) 48.6 kJ mol−1

Solution. k2/k1 = 2. 2.303 log10(k2/k1) = (Ea/R)[(T2 − T1)/(T1T2)]: 2.303 log 2 = (Ea/8.314)[(310 − 300)/(310 × 300)]. ∴ Ea = 2.303 × 0.301 × 8.314 × 310 × 300/10 = 53598.6 J = 53.6 kJ mol−1.

Answer (from key): (c) 53.6 kJ mol−1.

Teacher's Note: Arrhenius two-temperature form with ratio 2.

Exam Note: Convert J to kJ at the end.

Question Previous Years Problem 13. In the reaction, P + Q → R + S, the time taken for 75% reaction of P is twice the time taken for 50% reaction of P. The concentration of Q varies with reaction time as shown in the figure (a straight line falling from [Q]0). The overall order of the reaction is : (JEE (Advanced-I) 2013)

(a) 2 (b) 3 (c) 0 (d) 1

Solution. Figure (described): [Q] decreases linearly with time from [Q]0. T75% = 2 × T50% (for P): t1/2 is independent of concentration, so the reaction is first order for P. The straight-line graph shows zero order with respect to Q: [Q]t = [Q]0 − Kt. Overall order = 1 + 0 = 1.

Answer (from key): (d) 1.

Teacher's Note: 75% in two half-lives gives first order in P; a straight [Q] line gives zero order in Q.

Exam Note: Add the individual orders.

Question Previous Years Problem 14. For the elementary reaction M → N, the rate of disappearance of M increases by a factor of 8 upon doubling the concentration of M. The order of the reaction with respect to M is : (JEE (Advanced-II) 2014)

(a) 4 (b) 3 (c) 2 (d) 1

Solution. Rate r = K[M]n: r1/r2 = 1/8 = ([M]/[2M])n = (1/2)n, so n = 3.

Answer (from key): (b) 3.

Teacher's Note: Doubling gives 2ⁿ times the rate; 8 = 2³.

Exam Note: Match powers of 2.

Question Previous Years Problem 15. For the non-stoichiometric reaction 2A + B → C + D, the following kinetic data were obtained in three separate experiments, all at 298 K. [A], [B], initial rate of formation of C: (1) 0.1 M, 0.1 M, 1.2 × 10−3 mol L−1s−1; (2) 0.1 M, 0.2 M, 1.2 × 10−3; (3) 0.2 M, 0.1 M, 2.4 × 10−3. The rate law for the formation of C is : (JEE (Main) 2014)

(a) d[C]/dt = k[A][B] (b) d[C]/dt = k[A]2[B] (c) d[C]/dt = k[A][B]2 (d) d[C]/dt = k[A]

Solution. Let rate = K[A]m[B]n: 1.2 × 10−3 = K(0.1)m(0.1)n (i); 1.2 × 10−3 = K(0.1)m(0.2)n (ii); 2.4 × 10−3 = K(0.2)m(0.1)n (iii). By (i) and (ii), n = 0; by (i) and (iii), m = 1. So d[C]/dt = K[A]1.

Answer (from key): (d) d[C]/dt = k[A].

Teacher's Note: Rate unchanged when [B] doubles, so B is zero order; doubling A doubles the rate.

Exam Note: Change one concentration at a time.

Question Previous Years Problem 16. Higher order (> 3) reactions are rare due to : (JEE (Main) 2015)

(a) low probability of simultaneous collision of all the reacting species (b) increase in entropy and activation energy as more molecules are involved (c) shifting of equilibrium towards reactants due to elastic collisions (d) loss of active species on collision

Solution. Key answer (a): it is the reason for the given fact, since the probability of many molecules colliding simultaneously is very low.

Answer (from key): (a) low probability of simultaneous collision of all the reacting species.

Teacher's Note: Simultaneous collision of four or more molecules is highly improbable.

Exam Note: Molecularity above three is rare.

Question Previous Years Problem 17. Decomposition of H2O2 follows a first order reaction. In fifty minutes the concentration of H2O2 decreases from 0.5 to 0.125 M in one such decomposition. When the concentration of H2O2 reaches 0.05 M, the rate of formation of O2 will be : (JEE (Main) 2016)

(a) 6.93 × 10−4 mol min−1 (b) 2.66 L min−1 at STP (c) 1.34 × 10−2 mol min−1 (d) 6.93 × 10−2 mol min−1

Solution. Concentration falls to 1/4, i.e. two half-lives: 2 × t1/2 = 50 min, t1/2 = 25 min, K = 0.693/25 per min. rH2O2 = K[H2O2] = (0.693/25) × 0.05 = 1.386 × 10−3 mol litre−1 minute−1. 2H2O2 → 2H2O + O2: rO2 = (1/2)rH2O2 = 0.693 × 10−3 = 6.93 × 10−4 mol litre−1 minute−1. Note (book): the framing of the question is not correct; units of concentration are given as mol/litre whereas O2 is reported in mol/minute, and the volume of solution is not given (taken as 1 litre).

Answer (from key): (a) 6.93 × 10−4 mol min−1.

Teacher's Note: Two half-lives from 0.5 to 0.125 M; O₂ forms at half the rate H₂O₂ is consumed.

Exam Note: State the assumption of 1 litre.

Question Previous Years Problem 18. Two reactions R1 and R2 have identical pre-exponential factors. Activation energy of R1 exceeds that of R2 by 10 kJ mol−1. If k1 and k2 are rate constants for reactions R1 and R2 respectively at 300 K, then ln(k2/k1) is equal to : (R = 8.314 J mol−1 K−1) (JEE (Main) 2017)

(a) 8 (b) 12 (c) 6 (d) 4

Solution. k1 = Ae−Ea1/RT; k2 = Ae−Ea2/RT. k2/k1 = e(Ea1 − Ea2)/RT, so ln(k2/k1) = (Ea1 − Ea2)/RT = 10 × 103/(8.314 × 300) ≈ 4.

Answer (from key): (d) 4.

Teacher's Note: With equal A, the ratio depends only on the difference in Ea.

Exam Note: Convert kJ to J first.

Objective Problems (More Than One Answer Correct)

Question More Than One Answer Problem 1. Which of the following statements are correct?

(a) Zero order reactions are complex reactions. (b) A reaction having I order may be either elementary reaction or complex reaction. (c) A reaction having II order reaction must have molecularity = 2. (d) A reaction with molecularity = 2 must be a II order reaction.

Solution. Only an elementary bimolecular reaction is guaranteed to have order = 2; order and molecularity need not agree for complex reactions. Zero order reactions are complex (molecularity cannot be zero) and a first-order reaction may be elementary or complex. Correct: (a), (b).

Answer (from key): (a), (b).

Teacher's Note: Molecularity applies only to elementary steps; order is experimental.

Exam Note: Order equals molecularity only for elementary steps.

Question More Than One Answer Problem 2. Which of the following plots are correctly made for the reaction nA ⇌ (A)n, if it obeys I order reaction? (Graphs: (a) −d[A]/dt against t, a decreasing curve; (b) [A] against t, a decreasing curve; (c) [A]n against t, a rising curve; (d) −d[A]/dt against [A]n, a rising straight line. Not redrawn.)

(a) graph (a) (b) graph (b) (c) graph (c) (d) graph (d)

Solution. For a first-order reaction −d[A]/dt = K[A], so the rate falls with time as [A] falls exponentially (a, b), the product [A]n rises towards a limit (c), and the rate is directly proportional to concentration, a straight line (d). Key: all four are correct.

Answer (from key): (a), (b), (c), (d).

Teacher's Note: First-order rate is proportional to the remaining concentration, which decays exponentially.

Exam Note: Straight line through origin for rate against [A].

Question More Than One Answer Problem 3. Select the correct statements :

(a) Order of a reaction may be changed with change in the experimental conditions. (b) Rate of reaction either exothermic or endothermic both decrease with decrease in temperature. (c) A reaction mixture thermodynamically stable should be kinetically unstable. (d) A negative catalyst increases the energy of activation.

Solution. Kinetic stability and thermodynamic stability have no relation. The book states that the function of a negative catalyst is to slow down the speed of the reaction and it is not related to the energy of activation. Key: (a), (b). (Note for a human check: many textbooks say a negative catalyst raises the activation energy; the key above is as printed.)

Answer (from key): (a), (b).

Teacher's Note: Thermodynamic stability and kinetic stability are independent; rate falls as temperature falls.

Exam Note: Key excludes (d); check your own syllabus.

Question More Than One Answer Problem 4. For a gaseous reaction : A(g) → B(g), the rate expression may be given as :

(a) −d[A]/dt = K[A]n (b) −(1/V)(dnA/dt) = K[A]n (c) −(1/RT)(dPA/dt) = K[A]n (d) −dPA/dt = K(PA)n

Solution. Rate = −d[A]/dt = K[A]n, or −dPA/dt = K(PA)n; also −(1/V)dnA/dt = K[A]n since [A] = nA/V, and −(1/RT)dPA/dt = K[A]n since [A] = PA/RT. All are valid.

Answer (from key): (a), (b), (c), (d).

Teacher's Note: For gases concentration may be written as n/V or P/RT, so all forms are equivalent.

Exam Note: Convert between c, n and P.

Question More Than One Answer Problem 5. For which of the following conditions K = Arrhenius factor?

(a) Ea = 0 (b) Free radical combinations (c) T = ∞ (d) T = 0

Solution. K = Ae−Ea/RT; K = A when Ea = 0 (free radical combinations) or when T → ∞. At T = 0 the exponential goes to zero, so (d) is wrong.

Answer (from key): (a), (b), (c).

Teacher's Note: Exponential factor equals 1 if Ea = 0 or T → ∞.

Exam Note: T = 0 gives K = 0.

Question More Than One Answer Problem 6. Which of the following relations are correct if ΔH represents only magnitude?

(a) Exothermic reactions : Ea(f) + ΔH = Ea(b) (b) Endothermic reactions : Ea(f) = Ea(b) + ΔH (c) Exothermic reactions : ΔH > Ea (d) Endothermic reactions : ΔH < Ea

Solution. For any reaction ΔH = Ea(f) − Ea(b). With ΔH as a magnitude: exothermic Ea(b) = Ea(f) + ΔH; endothermic Ea(f) = Ea(b) + ΔH, so ΔH < Ea for endothermic. For exothermic reactions ΔH may be greater than, equal to or less than Ea, so (c) is not always true.

Answer (from key): (a), (b), (d).

Teacher's Note: Use Ea(f) − Ea(b) = ΔH and take care of the sign for exo and endothermic reactions.

Exam Note: Endothermic: Ea always exceeds ΔH.

Question More Than One Answer Problem 7. Which of the following graphs represent zero order if A → P, with [A] = [A]0 at t = 0, [A]t at time t and [X]t the product? (Graphs: (a) rate against t, a horizontal line; (b) [A]t against t, a falling line of slope −K; (c) [X]t against t, a rising line of slope K; (d) t1/2 against [A]0, a rising straight line. Not redrawn.)

(a) graph (a) (b) graph (b) (c) graph (c) (d) graph (d)

Solution. For zero order: rate is constant (a); [A]t = [A]0 − Kt (b); X = Kt (c); t1/2 ∝ (a)1−n = a (d). All four represent zero order.

Answer (from key): (a), (b), (c), (d).

Teacher's Note: Zero order: constant rate, linear [A] against t, and t½ proportional to initial concentration.

Exam Note: All four graphs are standard zero-order plots.

Question More Than One Answer Problem 8. Which one is correct according to collision theory of rate of reaction?

(a) Threshold energy level is a characteristic of reaction (b) Energy of activation decreases with rise in temperature (c) The energy of adsorbed activated complex is lower than simple activated complex (d) The energy of activated complex (both activated or adsorbed) is higher than reactant or product

Solution. The book's key is (a,b,c,d) and refers the reader to its theory text (Concepts of Physical Chemistry by Dr. P. Bahadur), adding that adsorption is always exothermic. Key as printed. (Note for a human check: option (b) is doubtful, since Ea is normally treated as independent of temperature.)

Answer (from key): (a), (b), (c), (d).

Teacher's Note: Key lists all four; adsorption lowers the energy of the activated complex.

Exam Note: Key as printed; option (b) doubtful.

Question More Than One Answer Problem 9. The rate expression for the reaction : NH4CNO ⇌ NH2CONH2 can be derived from the mechanism : (i) NH4CNO ⇌ NH4NCO (Fast; K1, K2); (ii) NH4NCO ⇌ NH3 + HNCO (Fast; K3 forward, K4 backward in the solution); (iii) NH3 + HNCO → NH2CONH2 (Slow). Which of the following statements are correct about rate expression?

(a) d[urea]/dt = (K1K3/K2)[NH4NCO] (b) d[urea]/dt = (K1K3/(K2K4))[NH4NCO] (c) d[urea]/dt = K[NH4CNO] (d) d[urea]/dt = (K1 × K2/(K3 × K4))[NH4NCO]

Solution. d[NH2CONH2]/dt = K4[NH3][HNCO] from (iii). Applying the steady state approximation to HNCO or NH3: d[HNCO]/dt = 0 = K3[NH4NCO] − K4[NH3][HNCO], so K3/K4 = [NH3][HNCO]/[NH4NCO]. Then d[urea]/dt = K4[NH3][HNCO] = K4(K3/K4)[NH4NCO] = K3[NH4NCO]. Also [NH4NCO] = (K1/K2)[NH4CNO], so d[urea]/dt = K3(K1/K2)[NH4CNO] = K[NH4CNO].

Answer (from key): (a), (c).

Teacher's Note: Steady state on HNCO removes the intermediates; the net law is first order in ammonium cyanate.

Exam Note: Steady-state step then fast equilibrium substitution.

Question More Than One Answer Problem 10. The rate of formation for C6H12 for the forward reaction is first order with respect to C6H6 in C6H6 + 3H2 ⇌ C6H12 (Kf, Kb). Which are correct?

(a) Kc = Kf/Kb (b) Kc = [C6H12]/([C6H6][H2]3) (c) rf = Kf[C6H6][H2] (d) rb = Kb[C6H12][H2]−2

Solution. Kc = Kf/Kb = [C6H12]/([C6H6][H2]3). With rf = Kf[C6H6][H2] and rb = Kb × (unknown) at equilibrium rf = rb: Kf[C6H6][H2] = Kb × Unknown, so Unknown = (Kf/Kb)[C6H6][H2] = Kc[C6H6][H2] = [C6H12][H2]−2. Hence rb = Kb[C6H12][H2]−2. All four are correct.

Answer (from key): (a), (b), (c), (d).

Teacher's Note: At equilibrium forward and backward rates are equal; this fixes the backward rate law.

Exam Note: Use r_f = r_b to infer the backward law.

Question More Than One Answer Problem 11. The rate law for the reaction : RCl + NaOH(aq) → ROH + NaCl is given by, Rate = k1[RCl]. The rate of the reaction will be :

(a) doubled on doubling the concentration of sodium hydroxide (b) halved on reducing the concentration of alkyl halide to one half (c) increased on increasing the temperature of the reaction (d) unaffected by increases the temperature of the reaction.

Solution. The reaction shows I order (rate depends only on [RCl]), so doubling NaOH has no effect and halving RCl halves the rate. Also rate of reaction increases with temperature. Correct: (b), (c).

Answer (from key): (b), (c).

Teacher's Note: Rate law has no [NaOH] term; temperature always raises K.

Exam Note: Read the rate law before judging each option.

Question More Than One Answer Problem 12. For a I order reaction

(a) The degree of dissociation is equal to (1 − e−kt) (b) A plot of reciprocal of reactants concentration vs time gives a straight line. (c) The time taken for completion of 75% reaction in thrice to that of t1/2 of the reaction (d) The pre exponential factor in the Arrhenius equation has the dimension of time T−1.

Solution. N = N0e−λt, so α = (N0 − N)/N0 = N0[1 − e−λt]/N0 = 1 − e−λt (a). Also A = KeEa/RT has the dimension of K, i.e. T−1 (d). (b) is for second order, and 75% completion takes two half-lives, not three (c).

Answer (from key): (a), (d).

Teacher's Note: First-order: α = 1 − e^(−kt), A has units of k, 75% needs two half-lives.

Exam Note: Reciprocal plot is second order.

Question More Than One Answer Problem 13. The rate constant of a reaction becomes equal to A, then which are not correct?

(a) −Ea/RT = 0 (b) EA = −RT (c) T = 0 (d) T = ∞

Solution. K = Ae−Ea/RT equals A if Ea/RT = 0. Also if T = ∞, Ea/RT approaches zero, therefore K = Ae0 = A. So (a) and (d) are correct, and the statements that are not correct are (b) and (c).

Answer (from key): (b), (c).

Teacher's Note: K equals A when the exponent is zero, i.e. Ea = 0 or T → ∞.

Exam Note: Question asks for the incorrect options.

Question More Than One Answer Problem 14. Two first order exothermic reactions : A →(K1) B and P →(K2) Q at T K have their rate constants such that K1 > K2. If temperature is increased to T2 K (T2 > T), the rate constant K1 changes to K3 and K2 to K4. Select the correct statements.

(a) K1 < K3 (b) K2 < K4 (c) K3 > K4 (d) K4 > K3

Solution. Rate constant of a reaction, whether exothermic or endothermic, increases with temperature, so K3 > K1 and K4 > K2. Key: (a), (b), (c) (keeping K3 > K4 as K1 > K2).

Answer (from key): (a), (b), (c).

Teacher's Note: K rises with T for every reaction; the ordering of the two reactions is key-given.

Exam Note: Exothermic reactions still speed up on heating.

Question More Than One Answer Problem 15. For the first order reaction, 2N2O5(g) → 4NO2(g) + O2(g) (IIT 2011)

(a) the concentration of the reactant decreases exponentially with time (b) the half-life of the reaction decreases with increasing temperature (c) the half-life of the reaction depends on the initial concentration of the reactant (d) the reaction proceeds to 99.6% completion in eight half-life duration

Solution. (i) N = N0e−λt: the reactant concentration decreases exponentially. (ii) t1/2 = [N0]0 at constant temperature, so half-life is independent of initial concentration (c is wrong); (iii) t1/2 = 0.693/k, and k rises with temperature, so t1/2 decreases. (iv) t99.6% = (2.303/k)log(100/0.4) = (2.303/k)log 250 = t1/2 × (2.303/0.693) × log 250 = 8 × t1/2.

Answer (from key): (a), (b), (d).

Teacher's Note: First order: exponential decay, t½ = 0.693/k independent of concentration, 99.6% ≈ 8 half-lives.

Exam Note: Check 99.6% = 1 − 1/256.

Question More Than One Answer Problem 16. According to the Arrhenius equation : (JEE (Advanced) I 2016)

(a) A high activation energy usually implies a fast reaction (b) Rate constant increases with increase in temperature. This is due to a greater number of collisions whose energy exceeds the activation energy (c) Higher the magnitude of activation energy, stronger is the temperature dependence of the rate constant (d) The pre-exponential factor is a measure of the rate at which collisions occur, irrespective of their energy

Solution. K = Ae−Ea/RT (higher Ea, lesser K, lesser rate). dK/dT = A·Ea/RT2, so dK/dT ∝ Ea: temperature dependence is stronger for larger Ea (c). A is the frequency factor, i.e. number of collisions per unit time per unit volume (d). (b) is the collision-theory explanation of the rise of K with T; (a) is wrong.

Answer (from key): (b), (c), (d).

Teacher's Note: A high Ea lowers K but makes K more sensitive to temperature; A counts collisions.

Exam Note: Differentiate ln K to see Ea's role.

Question More Than One Answer Problem 17. For 'invert sugar', the correct statement(s) is (are): (Given : specific rotations of (+)-sucrose, (+)-maltose, L-(−)-glucose and L-(+)-fructose in aqueous solution are +66°, +140°, −52° and +92°, respectively) (JEE (Advanced) II 2016)

(a) 'invert sugar' is prepared by acid catalyzed hydrolysis of maltose (b) 'invert sugar' is an equimolar mixture of D-(+)-glucose and D-(−)-fructose (c) specific rotation of 'invert sugar' is −20° (d) on reaction with Br2 water, 'invert sugar' forms saccharic acid as one of the products

Solution. Sucrose (C12H22O11) hydrolyses to D(+)-glucose ([α] = +52°) and D(−)-fructose ([α] = −92°), and the process is known as inversion of sugar. [α]mix = 0.5 × (+52°) + 0.5 × (−92°) = −20°. Since [α] for L(−)-glucose = −52°, [α] for D(+)-glucose = +52°; similarly fructose [α] = −92°. Glucose with Br2 water (a weak oxidant) gives gluconic acid; a strong oxidant would lead to saccharic acid, so (d) is wrong. Correct: (b), (c).

Answer (from key): (b), (c).

Teacher's Note: Invert sugar comes from sucrose, an equimolar glucose/fructose mixture: average rotation (52 − 92)/2 = −20°.

Exam Note: Br₂ water oxidises glucose only to gluconic acid.

Question More Than One Answer Problem 18. In a bimolecular reaction, the steric factor P was experimentally determined to be 4.5. The correct option(s) among the following is (are) : (JEE (Advanced) II 2017)

(a) The value of frequency factor predicted by Arrhenius equation is higher than that determined experimentally (b) The activation energy of the reaction is unaffected by the value of the steric factor (c) Since P = 4.5, the reaction will not proceed unless an effective catalyst is used (d) Experimentally determined value of frequency factor is higher than that predicted by Arrhenius equation

Solution. The Arrhenius factor A was theoretically proposed without considering the specific orientation of molecules at the time of collision. Taking orientation into account, k = p·AArr. × e−Ea/RT, where p is the steric factor. Collision theory: p·AArr. = Z (experimentally determined frequency factor), so Zactual/AArr. = p. Here p = 4.5 > 1, so Zactual > AArr.: the reaction occurs more quickly than particles collide. Correct: (b), (d).

Answer (from key): (b), (d).

Teacher's Note: Steric factor above 1 means the observed frequency factor exceeds the Arrhenius prediction; Ea is unaffected.

Exam Note: p = Z_actual/A_Arr.

Comprehension Based Problems

Question Comprehension 1, Q1. Comprehension 1: From the following data form the reaction between A and B (table as printed below; the solution uses the rates 5.0 × 10−4, 4.0 × 10−3 and 1.6 × 10−2 at 300 K and [A] = 1.0 × 10−3 in row 3).

[A] × 104 mol litre−1[B] × 105 mol litre−1Initial rate r × 104 mol litre−1sec−1 at 300 Kr × 103 at 320 K
2.53.05.02.0
5.06.04.0—
1.0 (printed '1:0')6.01.6—

The order of reaction with respect to A and with respect to B, respectively are :

(a) 2, 1 (b) 1, 2 (c) 2, 2 (d) 2, 3

Solution. Let rate = K[A]m[B]n: 5.0 × 10−4 = K[2.5 × 10−4]m[3.0 × 10−5]n (1); 4.0 × 10−3 = K[5.0 × 10−4]m[6.0 × 10−5]n (2); 1.6 × 10−2 = K[1.0 × 10−3]m[6.0 × 10−5]n (3). By (2) and (3), m = 2 (4). By (1) and (4), n = 1. Rate = K[A]2[B]1; orders 2 (A) and 1 (B).

Answer (from key): (a) 2, 1.

Teacher's Note: Compare rows where only one concentration changes, then use the first row for the other order.

Exam Note: Row 2 and 3 differ only in [A].

Question Comprehension 1, Q2. (Comprehension 1 data) The rate constant at 300 K:

(a) 2.66 × 10−8 (b) 1.33 × 10−8 (c) 2.66 × 108 (d) 1.33 × 108

Solution. By Eq. (1): 5.0 × 10−4 = K[2.5 × 10−4]2[3 × 10−5]1, so K = 2.66 × 108 L2 mol−2 sec−1 (at 300 K).

Answer (from key): (c) 2.66 × 108.

Teacher's Note: Substitute the first row into rate = K[A]²[B].

Exam Note: Include the unit L² mol⁻² s⁻¹.

Question Comprehension 1, Q3. (Comprehension 1 data) The energy of activation:

(a) 55.3 kJ (b) 65.44 kJ (c) 44.5 kJ (d) 75.44 kJ

Solution. 2.303 log10(K2/K1) = (Ea/R)[(T2 − T1)/(T1T2)] with r2/r1 = K2/K1: 2.303 log10(2.0 × 10−3/5.0 × 10−4) = (Ea/8.314)[(320 − 300)/(300 × 320)], so Ea = 55.33 kJ.

Answer (from key): (a) 55.3 kJ.

Teacher's Note: Same composition at 300 K and 320 K, so the rate ratio equals K₂/K₁.

Exam Note: Use the two-temperature Arrhenius form.

Question Comprehension 1, Q4. (Comprehension 1 data) The pre-exponential factor:

(a) 1.140 × 108 (b) 1.140 × 1010 (c) 1.140 × 1018 (d) 1.140 × 10−18

Solution. 2.303 log10K = 2.303 log10A − Ea/RT: 2.303 log10(2.66 × 108) = 2.303 log10A − 55.33 × 103/(8.314 × 300), so A = 1.140 × 1018.

Answer (from key): (c) 1.140 × 1018.

Teacher's Note: Rearrange K = A e^(−Ea/RT) for A using K at 300 K and Ea from the previous part.

Exam Note: Use Ea in J.

Question Comprehension 2, Q1. Comprehension 2: For the reaction A → B, the rate law expression is −d[A]/dt = K[A]1/2. If initial concentration of A is A0. Integrated form of the rate expression:

(a) Kt = 2[A01/2 − A1/2] (b) Kt = 2[A0−1/2 − A−1/2] (c) Kt = 1/2[A01/2 − A1/2] (d) Kt = 1/2[A−1/2 − A−1/2]

Solution. −d[A]/dt = K[A]1/2, or −dA/[A]1/2 = K dt. Integrating: −∫[A]−1/2dA = K∫dt gives −2A1/2 = Kt + C (1). At t = 0, A = A0, so C = −2A01/2 (2). By (2) and (1): Kt = 2[A01/2 − A1/2].

Answer (from key): (a) Kt = 2[A01/2 − A1/2].

Teacher's Note: Separate variables, integrate the power −1/2, fix the constant at t = 0.

Exam Note: Integral of A^(−1/2) is 2A^(1/2).

Question Comprehension 2, Q2. (Comprehension 2) Slope and intercept of the plots of log √A vs. t are respectively:

(a) −K/2, A0−1/2 (b) −K/2, A01/2 (c) 2K, A01/2 (d) −K, 2A0

Solution. The book's solution treats the plot of A1/2 against t: Eq. (3) gives 2A1/2 = −Kt + 2A01/2, or A1/2 = −(K/2)t + A01/2 (similar to y = mx + C), a straight line of slope −K/2 and intercept A01/2. (The statement prints 'log √A'; the working is for √A itself.)

Answer (from key): (b) −K/2, A01/2.

Teacher's Note: Rearrange the integrated law into y = mx + c form with y = √A.

Exam Note: The plot is linear in √A, not in log √A.

Question Comprehension 2, Q3. (Comprehension 2) The half-life of the reaction is given by:

(a) (√2(√2 − 1)/K)·A0 (b) √2(√2 − 1)A01/2/K (c) 2·A0/K (d) (√2 − 1)A01/2/(2K)

Solution. If t = t1/2, A = A0/2. By Eq. (3): Kt1/2 = 2[A01/2 − (A0/2)1/2] = 2A01/2[1 − 1/√2] = (2(√2 − 1)/√2)A01/2 = √2(√2 − 1)A01/2. Therefore t1/2 = √2(√2 − 1)A01/2/K.

Answer (from key): (b) √2(√2 − 1)A01/2/K.

Teacher's Note: Put A = A₀/2 into the integrated law and simplify.

Exam Note: Half-order half-life scales as √A₀.

Statement-Explanation Problems

Codes: (a) S is correct but E is wrong; (b) S is wrong but E is correct; (c) Both S and E are correct and E is correct explanation of S; (d) Both S and E are correct but E is not correct explanation of S.

Question Statement-Explanation Problem 1. S: The molecularity of first step is 1 and second step is 2. For the reaction 2O3(g) → 3O2(g): Step 1 O3(g) ⇌ O2(g) + O(g); Step 2 O3(g) + O →(slow) 2O2(g), the molecularity of first step is 1 and of second step is 2.

E: O(g) is an intermediate and rate of reaction is K[O3]2[O2]−1 and order of reaction is 1.

Solution. Kc = [O2][O]/[O3]; rate = K[O3][O] = K·Kc[O3]2/[O2] = K′[O3]2/[O2], so the order is 2 − 1 = 1. Key: (c).

Answer (from key): (c).

Teacher's Note: Molecularity counts molecules in each elementary step; the intermediate O is removed through the fast equilibrium.

Exam Note: Order 2 − 1 = 1.

Question Statement-Explanation Problem 2. S: Observed rate constant of the given reaction decreases with temperature: NO + NO ⇌ N2O2 (Kf, Kb); N2O2 + O2 →(slow) 2NO2; overall 2NO + O2 → 2NO2.

E: Kc of the reaction being exothermic and decrease in Kc overweigh increase in K with increase in temperature.

Solution. Rate = K[N2O2][O2] and Kc = [N2O2]/[NO]2, so rate = K·Kc[NO]2[O2] = Kobs[NO]2[O2]. Kc falls with temperature for an exothermic step, more than K rises, so Kobs falls. Key: (c).

Answer (from key): (c).

Teacher's Note: Observed constant is a product K·Kc; an exothermic Kc drops with T.

Exam Note: Observed K = K × Kc.

Question Statement-Explanation Problem 3. S: The plots of log t1/2 vs. log[A]0 gives a straight line with slope (1 − n).

E: t1/2 ∝ [A]01−n

Solution. t1/2 = [(2n−1 − 1)/(K(n − 1))][A]01−n, so log t1/2 = log[(2n−1 − 1)/(K(n−1))] + (1 − n) log[A]0: a straight line of slope (1 − n). Key: (c).

Answer (from key): (c).

Teacher's Note: Take logs of t½ ∝ [A]₀^(1−n) to see the slope.

Exam Note: Slope 1 − n gives the order.

Question Statement-Explanation Problem 4. S: Larger is the activation energy, lesser is the effect of a given temperature rise on rate constant 'K'.

E: K = Ae−Ea/RT

Solution. Higher activation energy means greater effect of a given temperature rise on the rate constant, so S is wrong; E (the Arrhenius equation) is correct. Key: (b).

Answer (from key): (b).

Teacher's Note: Since dK/dT ∝ Ea, larger Ea makes K more sensitive to temperature.

Exam Note: S reverses the effect.

Question Statement-Explanation Problem 5. S: For a free radical combination, K = A.

E: Ea is zero for free radical combination.

Solution. K = Ae−Ea/RT; if Ea = 0 then K = A. Key: (c).

Answer (from key): (c).

Teacher's Note: Zero Ea makes the exponential factor 1.

Exam Note: Ea = 0 ⇒ K = A.

Question Statement-Explanation Problem 6. S: Every collision of reactant molecule is not successful.

E: Every collision of reactant molecule with proper orientation is successful one.

Solution. A successful collision leads to a chemical reaction when the reactant molecules collide with proper orientation and attain threshold energy level. So S is correct but E is wrong (orientation alone is not enough). Key: (a).

Answer (from key): (a).

Teacher's Note: Success needs both proper orientation and threshold energy.

Exam Note: E omits the energy condition.

Question Statement-Explanation Problem 7. S: A plot of log dx/dt vs. log(a − x) leads to value of K as antilog (intercept) and slope equal to order of reaction.

E: dx/dt = K(a − x)n

Solution. log(dx/dt) = log K + n log(a − x): the intercept is log K and the slope is n. Key: (c).

Answer (from key): (c).

Teacher's Note: Taking logs of the rate law gives a line of slope n and intercept log K.

Exam Note: Intercept log K, slope n.

Question Statement-Explanation Problem 8. S: For a IInd order reaction A + B → Product, the rate can be given as : K[A]2 or K[A][B] or K[B]2.

E: Either [A] or [B] may or may not influence the rate.

Solution. In each case the order is IInd (the sum of the powers is 2), and the explanation shows why the concentration terms may differ. Key: (c).

Answer (from key): (c).

Teacher's Note: Second order only fixes the sum of powers, not which reactant appears.

Exam Note: Sum of powers must equal 2.

Question Statement-Explanation Problem 9. S: The acid hydrolysis of ester takes place more rapidly in D2O than H2O.

E: D3O+ is stronger acid than H3O+ or H2D+O.

Solution. Explanation is correct reason for statement (key: (c)).

Answer (from key): (c).

Teacher's Note: Acid catalysis is faster with the stronger acid D₃O⁺.

Exam Note: Stronger acid catalyses faster.

Question Statement-Explanation Problem 10. S: Emission of light as a result of exposure of P to air in night is called phosphorescence.

E: Phosphorus burns in O2 to give P2O5 and conversion of chemical energy into light energy producing cold light and the phenomenon is called chemi-luminescence.

Solution. The phenomenon is called chemi-luminescence, so S is wrong and E is correct. Key: (b).

Answer (from key): (b).

Teacher's Note: Light from a chemical reaction is chemiluminescence, not phosphorescence.

Exam Note: Phosphorescence is delayed re-emission of absorbed light.

Question Statement-Explanation Problem 11. S: Activation energy always increases the potential energy of reaction system.

E: The minimum kinetic energy that a molecule must possess in order to react on collision is called its activation energy.

Solution. Both are facts (key: (d)); the definition in E does not explain S.

Answer (from key): (d).

Teacher's Note: Both statements are individually true but E does not explain S.

Exam Note: E is a definition only.

Question Statement-Explanation Problem 12. S: The rate of reaction whether exothermic or endothermic, increases with temperature.

E: The rate of reaction = K[reactant]n and K increases with temperature.

Solution. Explanation is correct reason for statement (key: (c)): K rises with T for every reaction, so the rate rises.

Answer (from key): (c).

Teacher's Note: Rate = K[R]ⁿ and K always increases with T.

Exam Note: K rises with T for all reactions.

Question Statement-Explanation Problem 13. S: A catalyst always lower the energy of activation.

E: The catalyst-reactant interaction forms activated adsorbed complex and adsorption is always exothermic.

Solution. Explanation is correct reason for statement (key: (c)): the adsorbed activated complex has lower energy than the simple activated complex.

Answer (from key): (c).

Teacher's Note: Catalysis opens a path with an adsorbed complex of lower energy.

Exam Note: Lower-energy path explains it.

Question Statement-Explanation Problem 14. S: A catalyst does not affect the heat of reaction.

E: It increases the rate of reaction.

Solution. Both statement and explanation are correct (key: (d)); the rate increase does not explain why ΔH is unchanged.

Answer (from key): (d).

Teacher's Note: A catalyst changes the path, not the initial and final states, so ΔH is unchanged.

Exam Note: ΔH is a state function.

Question Statement-Explanation Problem 15. S: The elementary reaction is single step reaction and does not possess mechanism.

E: An elementary reaction has order of reaction and molecularity same.

Solution. Explanation is correct reason for statement (key: (c)).

Answer (from key): (c).

Teacher's Note: An elementary step has equal order and molecularity.

Exam Note: Key letter as printed.

Question Statement-Explanation Problem 16. S: Temperature coefficient is the ratio of two rate constants preferably at 35°C and 25°C.

E: It can also be given as e(Ea/R)[(T2 − T1)/(T1T2)]

Solution. Both statement and explanation are correct (key: (d)); the exponential form is the Arrhenius ratio and does not explain why 35°C and 25°C are preferred.

Answer (from key): (d).

Teacher's Note: Temperature coefficient equals K(T+10)/K(T), also expressible via the Arrhenius equation.

Exam Note: Both true, E not the reason.

Question Statement-Explanation Problem 17. S: The rate expression of 2NO2 + F2 → 2NO2F is r = K[NO2][F2].

E: The reaction has the mechanism NO2 + F2 →(slow) NO2F + F; NO2 + F →(fast) NO2F.

Solution. Explanation is correct reason for statement (key: (c)): the slow step is bimolecular in NO2 and F2.

Answer (from key): (c).

Teacher's Note: Rate follows the slow step of the mechanism.

Exam Note: Slow step fixes the rate law.

Question Statement-Explanation Problem 18. S: For the reaction 2O3 → 3O2, the rate = K[O3]2[O2]−1.

E: The reaction has −ve order for O2.

Solution. Explanation is correct reason for statement (key: (c)): the power of [O2] is −1.

Answer (from key): (c).

Teacher's Note: Negative power of O₂ is a negative order for O₂ (inhibition by product).

Exam Note: Negative order is allowed.

Question Statement-Explanation Problem 19. S: Threshold energy of a reaction is dependent of temperature.

E: The energy of activation decreases with increase in temperature.

Solution. Key: (d), both statement and explanation are correct. (Note for a human check: in standard treatments threshold energy and activation energy are not temperature dependent, so this key looks doubtful.)

Answer (from key): (d).

Teacher's Note: Key as printed; usual teaching treats Ea as temperature independent.

Exam Note: Key printed (d); doubtful.

Question Statement-Explanation Problem 20. S: The emission of light during burning of P in O2 is called chemi-luminescence.

E: The chemical energy is converted into light energy.

Solution. Chemiluminescence refers to emission of light as a result of chemical change. Key: (c).

Answer (from key): (c).

Teacher's Note: Chemiluminescence is cold light from a chemical reaction.

Exam Note: Name follows the energy conversion.

Question Statement-Explanation Problem 21. S: Photosynthesis in plants involves reaction of CO2 and H2O in presence of light and chlorophyll.

E: It is chlorophyll which absorbs light and passes this energy to reactant molecules.

Solution. Chlorophyll acts as photosensitizer; neither CO2 nor H2O absorbs light. Key: (c).

Answer (from key): (c).

Teacher's Note: A photosensitizer absorbs light and transfers energy to reactants.

Exam Note: Chlorophyll is the sensitizer.

Question Statement-Explanation Problem 22. S: Order of reaction can never be fractional for an elementary reaction.

E: An elementary reaction takes place by one step mechanism.

Solution. An elementary reaction is one step and in such reactions order and molecularity are same. Note that molecularity can never be fractional. Key: (c).

Answer (from key): (c).

Teacher's Note: Order equals molecularity for an elementary step, so it must be a whole number.

Exam Note: Molecularity is integral.

Question Statement-Explanation Problem 23. S: Every collision between molecules leads to chemical reaction.

E: Only those molecules react during collisions which acquire threshold energy level.

Solution. Explanation is correct and suggests that the statement is wrong. Key: (b).

Answer (from key): (b).

Teacher's Note: Only energetic, properly oriented collisions are effective.

Exam Note: S is false; E is true.

Question Statement-Explanation Problem 24. S: For each ten degree rise of temperature the specific rate constant is nearly doubled.

E: Energy-wise distribution of molecules in a gas is an exponential function of temperature.

Solution. Explanation is correct reason for statement (key: (c)): the fraction of molecules above threshold energy rises exponentially with temperature.

Answer (from key): (c).

Teacher's Note: Boltzmann distribution makes the high-energy fraction rise exponentially.

Exam Note: Exponential energy distribution.

Question Statement-Explanation Problem 25. S: The instantaneous rate of reaction can be studied in chemical kinetics.

E: Ionic reactions occur instantaneously.

Solution. Key: (b). The book's remark: ionic reactions are not studied in kinetics as their half-life is of the order of 10−2 sec (printed as 't1/2 is 10−2 sec'); E is the correct fact and S is treated as wrong.

Answer (from key): (b).

Teacher's Note: Key as printed: ionic reactions are too fast for ordinary kinetic study.

Exam Note: Key printed (b).

Question Statement-Explanation Problem 26. S: All catalytic reactions show zero order for catalyst used.

E: The rate of reaction does not depend on concentration of catalyst.

Solution. Explanation is correct reason for statement (key: (c)). (Note for a human check: in many real systems the rate does depend on catalyst concentration, so the key is doubtful.)

Answer (from key): (c).

Teacher's Note: Key as printed; check against your syllabus.

Exam Note: Key printed (c); doubtful.

Matching Type Problems

Question Matching Type Problem Type I, Q1. Match List A (graphs) with List B (order of reaction): (a) graph of [A]t against t, a falling straight line; (b) graph of [A]t−1 against t, a rising straight line; (c) graph of [A]t−1/2 against t (as printed), a falling straight line; (d) graph of log(dx/dt) against log(a − x), a rising straight line at 71.55° to the horizontal. List B: (i) O.R. = 1/2; (ii) O.R. = zero; (iii) O.R. = 2; (iv) O.R. = 3.

Solution. Answer (from key): a–ii; b–iii; c–i; d–iv. Reasoning: (a) linear fall of [A] with time is zero order; (b) 1/[A] linear in t is second order; (c) the straight line is for order 1/2 (as printed in the book); (d) slope = n = tan 71.55° = 3, so order 3.

Teacher's Note:Match each linear form of the integrated law to its order; slope of log rate against log concentration is the.

Exam Note: tan 71.55° = 3.

Question Matching Type Problem Type I, Q2. Match List A with List B: (a) Elementary reactions, (b) Complex reactions, (c) Free radical combinations, (d) Slow reactions, (e) Fast reactions. List B: 1. No energy of activation; 2. Low energy of activation; 3. High energy of activation; 4. Several elementary steps; 5. Single step.

Solution. Answer (from key): a–5; b–4; c–1; d–3; e–2.

Teacher's Note: Elementary means one step, complex means several; slow reactions have high Ea, fast ones low Ea.

Exam Note: Radical combination has zero Ea.

Question Matching Type Problem Type I, Q3. Match List I with List II: A. Flash photolysis; B. Rate of photochemical reaction; C. Chemiluminescence; D. Phosphorescence. List II: p. Intensity of light; q. Fast reactions; r. 4P + 5O2 → 2P2O5; s. ZnS.

Solution. Answer (from key): A–q; B–p; C–r; D–s.

Teacher's Note: Flash photolysis studies fast reactions; photochemical rate depends on light intensity; phosphorus burning shows chemiluminescence; ZnS phosphoresces.

Exam Note: Link each phenomenon to its standard example.

Question Matching Type Problem Type II, Q4. Type II (only one match from each list). List A: A. Rate of reaction; B. Rate constant of a reaction; C. Equilibrium constant; D. Vt = V0·T/273; E. Vt = V0 + V0·t/273. List B: 1. −Δ[A]/Δt = −d[A]/dt; 2. Vt = V0; 3. Vt ≠ V0; 4. Increases; 5. Decreases. List C: a. ΔH = +ve or −ve; b. ΔH = −ve; c. t → 0; d. Δt → 0; e. T → 0.

Solution. Answer (from key): A–1–d; B–4–a; C–5–b; D–3–e; E–2–c. Reasoning: the instantaneous rate is −d[A]/dt as Δt → 0; the rate constant increases with temperature whether ΔH is +ve or −ve; the equilibrium constant decreases with temperature for an exothermic reaction (ΔH −ve); Vt = V0T/273 differs from V0 as T → 0; Vt = V0 + V0t/273 gives V0 as t → 0.

Teacher's Note: Chain each quantity in List A to its property and its limiting condition.

Exam Note: Three-way match: check each pair.

Question Matching Type Problem Type II, Q5. Match Linear plots (A)–(F) with Slope (1–6) and Order (a–f). Plots: (A) ln(dx/dt) vs ln[A]t; (B) [A]t vs time; (C) 1/[A]t vs time; (D) log k vs T; (E) log[A]t vs time; (F) log t1/2 vs log[A]0. Slope: 1. −k; 2. −Ea/R; 3. 1 − n; 4. Zero; 5. k; 6. n. Order: a. Two; b. Zero; c. One; d. n; e. Any order; f. 1 − slope.

Solution. Answer (from key): A–6–d; B–1–b; C–5–a; D–2–e; E–1–c; F–3–f. Reasoning: slope of ln(rate) against ln[A] is n; [A] against t for zero order has slope −k; 1/[A] against t for second order has slope k; log k against 1/T has slope −Ea/2.303R for any order; log[A] against t for first order has slope −k (in suitable units); log t1/2 against log[A]0 has slope 1 − n, so n = 1 − slope.

Teacher's Note: Each linear plot has a characteristic slope tied to one order.

Exam Note: Match slope, then order.

JEE Mathematics: P Bahadur Solutions for P Bahadur Solutions Numerical Chemistry Chapter 11 Chemical Kinetics Part 2

Complete Math Solutions for P Bahadur Solutions Numerical Chemistry Chapter 11 Chemical Kinetics Part 2

Review detailed solutions for JEE Mathematics. The P Bahadur Solutions Numerical Chemistry Chapter 11 Chemical Kinetics Part 2 PDF provides comprehensive answers mapped to standard P Bahadur Solutions textbooks, ensuring targeted revision for weekly tests and terminal exams.

Mastering Core Concepts with P Bahadur Solutions

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Explore More Study Resources for JEE Math

In addition to these P Bahadur Solutions chapters, students can explore a wider library of free online mock tests, printable sample papers, and short revision notes aligned with the 2026 academic session.

FAQs

What are these P Bahadur Solutions for JEE Chemistry?

They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the P Bahadur JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these P Bahadur solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising P Bahadur JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.