P Bahadur Solutions for JEE Chemistry: Chapter 11 Chemical Kinetics
Explore reliable textbook solutions for Chapter 11 Chemical Kinetics tailored for JEE learners using P Bahadur methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice JEE Chemistry Solutions: Chapter 11 Chemical Kinetics
Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.
Chemical Kinetics - Numerical Problems 1 to 104
Numerical Problems with Solutions
Question 1. The reaction 2NO + Br2 → 2NOBr obeys the following mechanism. (i) NO + Br2 ⇌ NOBr2 (fast); (ii) NOBr2 + NO → 2NOBr (slow). Suggest the rate expression.
Solution. The rate expression is derived from step (ii) of the mechanism, as it is the slower step:
rate = K[NOBr2][NO] ...(1)
NOBr2 is an intermediate, so its concentration must be replaced using step (i). For step (i), equilibrium constant KC = [NOBr2]/([NO][Br2]), so [NOBr2] = KC[NO][Br2] ...(2)
From (1) and (2): rate = K·KC[NO]2[Br2], i.e. rate = K′[NO]2[Br2].
Teacher's Note: Rate law follows the slow step; eliminate intermediates through the fast pre-equilibrium.
Exam Note: Replace intermediate using equilibrium constant; final order three.
Question 2. The thermal decomposition of N2O5 occurs in the following steps: Step I: N2O5 → NO2 + NO3 (slow); Step II: N2O5 + NO3 → 3NO2 + O2 (fast). Overall reaction is 2N2O5 → 4NO2 + O2. Suggest the rate expression.
Solution. From the slow step (Step I), rate = K[N2O5].
Teacher's Note: The slowest step alone fixes the rate law; the fast step does not appear.
Exam Note: Write rate from slow step only.
Question 3. For the reaction 2NO2 + F2 → 2NO2F, the experimental rate law is r = K[NO2][F2]. Propose the mechanism of the reaction.
Solution. The rate = K[NO2][F2] implies that the slow step involves only one molecule of each reacting species, so the mechanism is:
NO2 + F2 → NO2F + F (slow)
NO2 + F → NO2F (fast)
Overall reaction: 2NO2 + F2 → 2NO2F.
Teacher's Note: Rate law shows which species are in the slow step; add the fast step to balance the overall equation.
Exam Note: Slow step must match rate law; steps must sum to overall.
Question 4. The reaction 2NO2Cl → 2NO2 + Cl2 has experimental data that rate = K[NO2Cl]. Propose the mechanism.
Solution. Rate = K[NO2Cl] means only one NO2Cl molecule takes part in the slow step:
NO2Cl → NO2 + Cl (slow)
NO2Cl + Cl → NO2 + Cl2 (fast)
Overall reaction: 2NO2Cl → 2NO2 + Cl2.
Teacher's Note: First order in NO2Cl but stoichiometry has two molecules, so a second fast step is needed.
Exam Note: Show both steps add up to the overall equation.
Question 5. The decomposition of A and B obeys I order with half-life 54.0 and 18.0 minutes respectively. If [A]0 = [B]0 then after how much time the ratio of concentration of A and B will be 4 : 1 and 1 : 4 respectively.
Solution. [A]t = [A]0·e-K1t and [B]t = [B]0·e-K2t, so [A]t/[B]t = e(K2−K1)t.
For [A]t/[B]t = 4: 4 = e(K2−K1)t, so (K2 − K1)t = ln 4.
t = ln 4/(K2 − K1) = 1.386/(0.693/18 − 0.693/54) = 54 minute.
[A]t/[B]t = 1/4 is not possible because B decays faster (B has the shorter half-life, so the ratio A/B only increases with time).
Teacher's Note: B has the shorter half-life, so A/B grows with time; use K = 0.693/t1/2 for each.
Exam Note: State clearly why the 1:4 ratio is impossible.
Question 6. From the concentrations of R at different times given below, calculate the average rate of the reaction R → P during different intervals of time.
t/s: 0, 5, 10, 20, 30
103 × [R]/mol L-1: 160, 80, 40, 10, 2.5
Solution. Average rate = −(R2 − R1)/(t2 − t1):
After 5 s: r1 = −(80 − 160)×10-3/5 = 16 × 10-3 mol L-1 s-1
After 10 s: r2 = −(40 − 80)×10-3/5 = 8 × 10-3 mol L-1 s-1
After 20 s: r3 = −(10 − 40)×10-3/10 = 3 × 10-3 mol L-1 s-1
After 30 s: r4 = −(2.5 − 10)×10-3/10 = 0.75 × 10-3 mol L-1 s-1
Teacher's Note: Average rate = change in concentration over each separate interval; rate falls as reactant is used.
Exam Note: Use consecutive intervals, not 0 to t; give units.
Question 7. The initial concentration of [I-]0 and [ClO-]0 are 0.075 M and 0.125 M to carry out a reaction: ClO- + I- → Cl- + IO- and rate = K[ClO-][I-]. Derive the rate expression in terms of concentration of ClO- alone at any time.
Solution. The reaction shows that 1 mole of ClO- reacts with 1 mole of I- at any time. Thus, at any time after the reaction begins:
Δ[I-] = 0.075 − [I-]left and Δ[ClO-] = 0.125 − [ClO-]left, and Δ[I-] = Δ[ClO-] (1 : 1 ratio).
So 0.075 − [I-]left = 0.125 − [ClO-]left, or [I-]left = [ClO-]left − 0.050.
Rate at any time = K[ClO-]left[I-]left = K[ClO-]left([ClO-]left − 0.050).
Teacher's Note: With 1:1 stoichiometry, the difference of the two concentrations stays constant (0.050 M).
Exam Note: Use stoichiometric difference to eliminate one concentration.
Question 8. The net rate of reaction for the change [Cu(NH3)4]2+ + H2O ⇌ [Cu(NH3)3H2O]2+ + NH3 is, dx/dt = 2.0 × 10-4 [Cu(NH3)4]2+ − 3.0 × 105 [Cu(NH3)3H2O]2+[NH3]. Calculate: (i) Rate expression for forward and backward reactions. (ii) The ratio of rate constant for forward and backward reactions. (iii) The direction of reaction in which the above reaction will be more predominant.
Solution. (i) Rate of forward reaction = 2.0 × 10-4[Cu(NH3)42+][H2O]
Rate of backward reaction = 3.0 × 105[Cu(NH3)3H2O2+][NH3]
(ii) Kf = 2.0 × 10-4, Kb = 3.0 × 105, so Kf/Kb = 2.0 × 10-4/3.0 × 105 = 6.6 × 10-10 (more precisely 6.7 × 10-10).
(iii) Since Kf << Kb, the more predominant reaction is the backward reaction.
Teacher's Note: Net rate is forward minus backward term; compare Kf and Kb to find the favoured direction.
Exam Note: Read each rate term separately; Kf/Kb gives equilibrium constant.
Question 9. Gas A(g) shows two parallel path I order reactions: A → 2B(g) (rate constant K1) and A → C(g) (rate constant K2). The initial pressure of A(g) in a container of volume V litre is 1 atm. After 10 sec the pressure becomes 1.4 atm and after ∞ time it becomes 1.5 atm. Calculate K1 and K2.
Solution. −d[B]/dt = K1[A] and −d[C]/dt = K2[A] (rates of formation measured as decomposition of A along each path), so [B]/[C] = K1/K2 (in terms of A decomposed by each path).
Let after ∞ time the pressure equivalent of A decomposed by path 2 be P′ (to C) and 1 − P′ (to B): 2P′ + 1 − P′ = 1.5, so P′ = 0.5 atm.
K1/K2 = 2P′/(1 − P′) = 1/0.5 = 2, i.e. 2 : 1 is the ratio of decomposition to B : C.
Now: A → 2B + C(paths), let a be the pressure of A decomposed after 10 s; of this 2a/3 goes to B-path and a/3 to C-path: 1 − a + 4a/3 + a/3 = 1.4, so a = 0.6.
Kav = (2.303/10) log (1/0.4) = 0.092
Kav = K1 + K2; 0.092 = 2K2 + K2, so K2 = 0.03 s-1, K1 = 0.062 s-1 (as printed; exact values 0.0305 and 0.0611).
Teacher's Note: Parallel first order paths: Ktotal = K1 + K2; product ratio gives K1/K2.
Exam Note: Use total pressure to find a, then split K.
Question 10. For a reversible reaction A ⇌ B, if pre-exponential factor is same for both forward and backward reaction, show that KC = e-ΔH/RT, where ΔH is heat of reaction.
Solution. A ⇌ B with Kf = A·e-Ea/RT and Kb = A·e-Eb/RT (same pre-exponential factor; energy profile: Ea for forward, Eb for backward, ΔH = Ea − Eb).
Keq = Kf/Kb = e(Eb − Ea)/RT = e-ΔH/RT (∵ ΔH = Ea − Eb).
Teacher's Note: Equal pre-exponential factors cancel; the exponent becomes the difference of activation energies, i.e. −ΔH.
Exam Note: Start from Arrhenius equation for both directions.
Question 11. The rate constant of a reaction is 1.5 × 107 sec-1 at 50°C and 4.5 × 107 sec-1 at 100°C. Evaluate the Arrhenius parameters A and Ea. (IIT 1998)
Solution. 2.303 log (K2/K1) = (Ea/R)[(T2 − T1)/(T1T2)]
2.303 log (4.5×107/1.5×107) = (Ea/8.314)[(373 − 323)/(373×323)]
Ea = 2.2 × 104 J mol-1
K = A·e-Ea/RT: 4.5×107 = A·e-(2.2×104)/(8.314×373), so A = 5.42 × 1010 s-1.
Teacher's Note: Two-temperature Arrhenius gives Ea; substitute back at either temperature for A. Convert °C to K.
Exam Note: Convert to kelvin; use R in J.
Question 12. The specific rate constant for the decomposition of formic acid is 5.5 × 10-4 sec-1 at 413 K. Calculate the specific rate constant at 458 K, if the energy of activation is 2.37 × 104 cal mol-1.
Solution. Given K1 = 5.5×10-4 at T1 = 413 K, T2 = 458 K, Ea = 2.37×104 cal mol-1, R = 1.987 cal.
2.303 log (K2/K1) = (Ea/R)[(T2 − T1)/(T1T2)]
2.303 log (K2/5.5×10-4) = (2.37×104/1.987)[(458 − 413)/(458×413)]
K2 = 9.38 × 10-3 s-1
Teacher's Note: Use R in the same energy unit as Ea (calories here).
Exam Note: Match units of R and Ea.
Question 13. For a reaction A2 + B2 → 2AB, evaluate the energy of activation from the following data:
T (in K): 500, 200
1/T (K-1): 2 × 10-3, 5 × 10-3
log10 K: 3.0, 2.0
Solution. log10K = log10A − Ea/(2.303RT), so the graph of log10K vs 1/T is linear with slope −Ea/(2.303R).
Slope = −Ea/(2.303R) = (3.0 − 2.0)/(2×10-3 − 5×10-3)
Ea/(2.303×2) = 1/(3×10-3) (taking R ≈ 2 cal), so Ea = 1.54 × 103 cal.
Corrected: the book writes this as 15.4 kcal, which is wrong; 1.54 × 103 cal = 1.54 kcal (about 1.53 kcal with R = 1.987 cal, i.e. about 6.4 kJ mol-1).
Teacher's Note: Slope of log K versus 1/T equals −Ea/2.303R; take two points from the table.
Exam Note: Slope is negative; convert cal to kcal carefully.
Question 14. Calculate the rate constant and half-life period for first order reaction having the activation energy 39.3 kcal mol-1 at 300°C and the frequency constant 1.11 × 1011 sec-1.
Solution. Given A = 1.11×1011 s-1, Ea = 39.3×103 cal mol-1, R = 1.987 cal, T = 573 K.
K = A·e-Ea/RT, so log10K = log10A − Ea/(2.303RT) = log10(1.11×1011) − 39.3×103/(2.303×1.987×573)
K = 1.14 × 10-4 s-1
t1/2 = 0.693/K = 0.693/(1.14×10-4) = 6078 s
Teacher's Note: Arrhenius gives K; for first order t1/2 = 0.693/K regardless of concentration.
Exam Note: Add 273 to 300°C; t1/2 from K.
Question 15. A reaction proceeds five times more at 60°C as it does at 30°C. Estimate energy of activation.
Solution. T2 = 333 K, T1 = 303 K, R = 1.987×10-3 kcal. Since r = K[reactant]n at a given temperature, r2/r1 = K2/K1 = 5.
2.303 log 5 = (Ea/(1.987×10-3))[(333 − 303)/(333×303)]
Ea = 10.757 kcal mol-1
Teacher's Note: Same concentrations at both temperatures, so rate ratio equals rate-constant ratio.
Exam Note: Rate ratio equals K ratio at equal concentration.
Question 16. For two first order reactions having same concentration of A and B at t = 0, use the given data to calculate the temperature at which both occurs with same rate. Reaction I: A → Z; K1 = 1016 e(-3000/T). Reaction II: B → Y; K2 = 1015 e(-2000/T).
Solution. r1 = K1[A] and r2 = K2[B]. Since [A] = [B], r1 = r2 when K1 = K2.
1016e(-3000/T) = 1015e(-2000/T)
Taking natural logs (with 10 = e2.303): 16 − 3000/(2.303T) = 15 − 2000/(2.303T)
1 = 1000/(2.303T), so T = 1000/2.303 = 434.22 K.
Teacher's Note: Equal rates at equal concentration means equal rate constants; equate the two Arrhenius expressions.
Exam Note: Equate K1 and K2, take log, solve for T.
Question 17. The rate constant of a reaction increases by 7% when its temperature is raised from 300 K to 310 K, while its equilibrium constant increases by 3%. Calculate the activation energy of the forward and reverse reactions.
Solution. Rate constant at 300 K = k; at 310 K = k + k×(7/100) = 1.07k.
2.303 log (K2/K1) = (Eaf/R)[(T2 − T1)/(T2T1)]: 2.303 log 1.07 = (Eaf/2)[(310 − 300)/(310×300)]
Eaf = 1258.68 cal
Equilibrium constant at 300 K = K′, at 310 K = K′ + (3/100)K′ = 1.03K′.
2.303 log (1.03K′/K′) = (ΔH/2)[(310 − 300)/(310×300)], so ΔH = 549.89 cal.
ΔH = Eaf − Eab: 549.89 = 1258.68 − Eab, so Eab = 708.79 cal.
Teacher's Note: Rate constant temperature dependence gives Ea; equilibrium constant dependence gives ΔH (van't Hoff).
Exam Note: Use Arrhenius for K, van't Hoff for Keq.
Question 18. For the reaction A ⇌ B, ΔE for the reaction is −33.0 kJ mol-1. Calculate: (a) equilibrium constant KC for the reaction at 300 K. (b) if Ef and Eb are in the ratio 20 : 31, calculate Ef, Eb at 300 K. Assuming pre-exponential factor same for forward and backward reaction.
Solution. Given ΔH = Ef − Eb = −33 kJ (energy profile: the product is lower than the reactant).
(a) Kf = A·e-Ef/RT and Kb = A·e-Eb/RT, so KC = Kf/Kb = e(Eb − Ef)/RT = e(33×103)/(8.314×300) = 5.57 × 105 at 300 K (book: 5.572 × 105).
(b) Ef/Eb = 20/31 and Ef − Eb = −33 kJ, so Ef − (31/20)Ef = −33 kJ, giving Ef = 60 kJ and Eb = 93 kJ.
Teacher's Note: With equal A factors KC = e-ΔH/RT; ratio of energies plus their difference fixes both.
Exam Note: Exothermic: Eb exceeds Ef by the magnitude of ΔH.
Question 19. The rate of decomposition for methyl nitrite and ethyl nitrite can be given in terms of rate constant (in sec-1) K1 and K2 respectively. The energy of activations for the two reactions are 152.30 kJ mol-1 and 157.7 kJ mol-1 as well as frequency factors are 1013 and 1014 respectively for the decomposition of methyl and ethyl nitrite. Calculate the temperature at which rate constant will be same for the two reactions.
Solution. K1 = 1013e-152300/(8.314T) (methyl nitrite) and K2 = 1014e-157700/(8.314T) (ethyl nitrite). If K1 = K2:
1013e-152300/(8.314T) = 1014e-157700/(8.314T), so 10 = e(157700 − 152300)/(8.314T)
2.303 log1010 = (157700 − 152300)/(8.314 × T), so T = 282 K.
Teacher's Note: Equate the two Arrhenius expressions; the 10-fold frequency factor is balanced by the 5.4 kJ difference in Ea.
Exam Note: Equate rate constants; ln 10 = 2.303.
Question 20. Given that the temperature coefficient for the saponification of ethyl acetate by NaOH is 1.75. Calculate the activation energy.
Solution. Temperature coefficient = ratio of rate constants at 35°C and 25°C, so K2/K1 = 1.75, T1 = 298 K, T2 = 308 K.
2.303 log10(K2/K1) = (Ea/R)[(T2 − T1)/(T1T2)]
2.303 log101.75 = (Ea/1.987)[(308 − 298)/(308 × 298)]
Ea = 2.303 × 308 × 298 × 1.987/10 × log101.75 cal mol-1.
Book answer: 10.27 kcal mol-1. Corrected: evaluating the expression gives Ea = 10.21 kcal mol-1 (≈ 42.7 kJ mol-1).
Teacher's Note: Temperature coefficient is K(T+10)/K(T) between 25°C and 35°C; apply the two-temperature Arrhenius equation.
Exam Note: Temperature coefficient means K ratio per 10°C rise.
Question 21. A first order reaction A → B requires activation energy of 70 kJ mol-1. When a 20% solution of A was kept at 25°C for 20 minute, 25% decomposition took place. What will be the per cent decomposition in the same time in a 30% solution maintained at 40°C? Assume that activation energy remains constant in this range of temperature. (IIT 1993)
Solution. For the 20% solution at 25°C: initial a = 20, amount left (a − x) = 20 × 75/100 = 15 after 20 min.
K25 = (2.303/20) log10(20/15) = 0.0144 min-1
2.303 log10(K40/K25) = (70×103/8.314)[(313 − 298)/(313 × 298)], so K40/K25 = 3.872 and K40 = 0.05575 min-1.
Let m be the amount left in the 30% solution after 20 min at 40°C: K40 = (2.303/t) log10[a/(a − x)], 0.05575 = (2.303/20) log10(30/m), giving m = 9.84 (book: 9.838).
% decomposition = (30 − 9.84)/30 × 100 = 67.2 % (book: 67.21 %).
Teacher's Note: For first order the rate constant does not depend on the initial concentration; only temperature changes K.
Exam Note: First order: percentage decomposed is independent of initial concentration.
Question 22. A given sample of milk turns sour at room temperature (20°C) in 64 hour. In a refrigerator at 3°C, milk can be stored three times as long before it sours. Estimate (a) the activation energy for souring of milk, (b) how long it take milk to sour at 40°C?
Solution. Given K293/K276 = 3 (milk lasts three times as long at 3°C, so the rate constant at 20°C is three times that at 3°C), T2 = 293 K, T1 = 276 K.
(a) 2.303 log10(K2/K1) = (Ea/R)[(T2 − T1)/(T1T2)] (R = 2 cal): 2.303 log103 = (Ea/2)[(293 − 276)/(293 × 276)], so Ea = 10453.95 cal = 10.454 kcal.
(b) With Ea = 10.454 kcal, T3 = 313 K, T2 = 293 K: 2.303 log10(K3/K2) = (10.454×103/2)[(313 − 293)/(313 × 293)], so K3/K2 = 3.12.
Since K ∝ 1/time, K3/K2 = t2/t3, so t3 = t2 × K2/K3 = 64 × (1/3.12) = 20.5 hr.
Teacher's Note: Souring time is inversely proportional to the rate constant, so time ratios replace K ratios.
Exam Note: Use time ratio as inverse of K ratio.
Question 23. The time required for 10% completion of a first order reaction at 298 K is equal to that required for its 25% completion at 308 K. If the pre-exponential factor for the reaction is 3.56 × 109 s-1, calculate its rate constant at 318 K and also the energy of activation. (IIT 1997)
Solution. For first order, t = (2.303/K298) log10(100/90) = (2.303/K308) log10(100/75), so K308/K298 = 2.73.
2.303 log102.73 = (Ea/8.314) × 10/(298 × 308), so Ea = 76.62 kJ mol-1 (= 18.33 kcal mol-1).
K318 = A·e-Ea/RT = 3.56×109 × e-76622.7/(8.314×318) = 3.56×109 × 2.59×10-13 = 9.22 × 10-4 s-1.
Teacher's Note: Equal times at two temperatures for different fractions give the K ratio; Ea then gives K at 318 K.
Exam Note: K ratio from log(100/90) over log(100/75).
Question 24. Calculate the factor by which the rate of I order reaction is increased for a temperature rise of 10°C from 25°C to 35°C. The energy of activation is 35 kcal mol-1.
Solution. T2 = 308 K, T1 = 298 K, Ea = 35×103 cal mol-1, R = 1.987 cal.
2.303 log10(K2/K1) = (35×103/1.987)[(308 − 298)/(308 × 298)], so K2/K1 = 6.812.
The rate constant increases by a factor of 6.812. Since rate = K[ ] (first order, same concentration), the rate also increases by a factor of 6.812.
Teacher's Note: At the same concentration the rate ratio equals the K ratio, which is e(Ea/R)(ΔT/T1T2).
Exam Note: Rate factor equals K factor at equal concentration.
Question 25. A Ist order reaction is 50% complete in 30 minute at 27°C and in 10 minute at 47°C. Calculate the: (a) rate constant for reaction at 27°C and 47°C. (b) energy of activation for the reaction. (c) energy of activation for the reverse reaction if heat of reaction is −50 kJ mol-1.
Solution. For a first order reaction K = 0.693/t1/2.
(a) At 27°C: K1 = 0.693/30 = 2.31 × 10-2 min-1. At 47°C: K2 = 0.693/10 = 6.93 × 10-2 min-1.
(b) 2.303 log10(K2/K1) = (Ea/R)[(T2 − T1)/(T1T2)]: 2.303 log10(6.93×10-2/2.31×10-2) = (Ea/8.314)[(320 − 300)/(320 × 300)], so Ea = 43850 J mol-1 = 43.85 kJ mol-1.
(c) For a reaction Ea(f.r.) − Ea(b.r.) = ΔH: 43.85 − Ea(b.r.) = −50.0, so Ea(b.r.) = 93.85 kJ mol-1.
Teacher's Note: Half-life gives K directly; K ratio over a 20 K rise gives Ea; Eb = Ef − ΔH.
Exam Note: Exothermic reaction: reverse Ea is larger than forward.
Question 26. At 380°C, the half-life period for the first order decomposition of H2O2 is 360 minute. The energy of activation of the reaction is 200 kJ mol-1. Calculate the time required for 75% decomposition at 450°C. (IIT 1995)
Solution. K1 = 0.693/360 min-1 at 653 K, Ea = 200×103 J, K2 = ? at 723 K, R = 8.314 J.
From 2.303 log10(K2/K1) = (Ea/R)[(T2 − T1)/(T1T2)]: K2 = 0.068 min-1.
t = (2.303/0.068) log10(100/25) = 20.39 minute.
Teacher's Note: Half-life at 653 K gives K1; convert to 723 K, then use the first order integrated equation for 75% decomposition.
Exam Note: 75% decomposition equals two half-lives.
Question 27. The energy of activation for a reaction is 100 kJ mol-1. Presence of a catalyst lowers the energy of activation by 75%. What will be effect on rate of reaction at 20°C; other things being equal?
Solution. K = A·e-Ea/RT. Case I (no catalyst): K1 = A·e-100/RT; Case II (catalyst, Ea lowered by 75% to 25 kJ mol-1): K2 = A·e-25/RT.
K2/K1 = e75/RT, so ln(K2/K1) = 75×103/(8.314 × 293), giving K2/K1 = 2.35 × 1013.
Since r = K[ ]n and n and concentrations are the same in both cases, r2/r1 = K2/K1 = 2.35 × 1013, i.e. the rate increases by about 2.35 × 1013 times.
Teacher's Note: Catalyst lowers Ea by 75 kJ, so rate rises by e75000/RT; the A factor is unchanged.
Exam Note: Convert kJ to J; use T = 293 K.
Question 28. A hydrogenation reaction is carried out at 500 K. If the same reaction is carried out in presence of a catalyst at the same rate, the temperature required is 400 K. Calculate the activation energy of the reaction, if the catalyst lowers the activation energy barrier by 20 kJ mol-1. (IIT 2000)
Solution. Let Ea be the activation energy without catalyst (at 500 K) and Ea − 20 kJ mol-1 with the catalyst (at 400 K). K = A·e-Ea/RT.
Without catalyst: K1 = A·e-Ea/(R×500); with catalyst: K2 = A·e-(Ea−20)/(R×400).
The two rates are the same, i.e. r1 = r2, so K1 = K2, giving Ea/(R × 500) = (Ea − 20)/(R × 400).
Ea/500 = (Ea − 20)/400, so Ea = 100 kJ mol-1 (this is the activation energy without catalyst; with catalyst it is 80 kJ mol-1).
Teacher's Note: Same rate at different temperatures means Ea/T is the same for both, so Ea/T equality gives the answer.
Exam Note: Equal K means Ea/T equal; solve linear equation.
Question 29. The rate constant for the first order decomposition of a certain reaction is given by the equation, ln K (sec-1) = 14.34 − 1.25 × 104/T. Calculate: (a) the energy of activation. (b) the rate constant at 500 K. (c) at what temperature will its half-life period be 256 minute? (IIT July 1997)
Solution. (a) ln K = 14.34 − 1.25×104/T, compared with ln K = ln A − Ea/(RT): Ea/R = 1.25×104, so Ea = 1.25×104 × 1.987 cal mol-1 = 24.83 kcal mol-1 (24.84 kcal mol-1 by exact multiplication; about 104 kJ mol-1).
(b) ln K = 14.34 − 1.25×104/500, so K = 2.35 × 10-5 s-1.
(c) K = 0.693/(256 × 60) s-1: ln[0.693/(256×60)] = 14.34 − 1.25×104/T, i.e. −10.00 = 14.34 − 1.25×104/T, so T = 513 K.
Teacher's Note: Match the given equation to ln K = ln A − Ea/RT; convert t1/2 to seconds for K.
Exam Note: Convert minutes to seconds for K in s-1.
Question 30. For A + B → C + D; ΔH = 20 kJ mol-1; the activation energy of the forward reaction is 85 kJ/mol. Calculate activation energy of the reverse reaction.
Solution. ΔH of forward reaction = 20 kJ mol-1 (endothermic; energy profile has the products higher than reactants) and Ea (forward) = 85 kJ mol-1.
Energy of activation for backward reaction = Ea − ΔH = 85 − 20 = 65 kJ mol-1.
Teacher's Note: ΔH = Ef − Eb on the energy profile; endothermic means the reverse barrier is smaller.
Exam Note: Sign of ΔH decides whether Eb is lower or higher.
Question 31. Two reactions (I) A → Products (II) B → Products follow first order kinetics. The rate of the reaction (I) is doubled when temperature is raised from 300 K to 310 K. The half-life for this reaction at 310 K is 30 minute. At the same temperature B decomposes twice as fast as A. If the energy of activation for the reaction (II) is half that of reaction (I) calculate the rate constant of reaction (II) at 300 K. (IIT 1992)
Solution. For (I): t1/2 at 310 K = 30 min, so KI at 310 K = 0.693/30 = 0.0231 min-1 ...(1). Given KI(310)/KI(300) = 2 ...(2) and KII(310)/KI(310) = 2 ...(3), Ea,II/Ea,I = 1/2 ...(4).
For I: 2.303 log10[KI(310)/KI(300)] = (Ea,I/R)[(310 − 300)/(310 × 300)] ...(5)
For II: 2.303 log10[KII(310)/KII(300)] = (Ea,II/R)[(310 − 300)/(310 × 300)] ...(6)
Dividing (5) by (6): log[KI(310)/KI(300)]/log[KII(310)/KII(300)] = Ea,I/Ea,II = 2 ...(7), so KI(310)/KI(300) = [KII(310)/KII(300)]2 ...(8).
By (2) and (8): [KII(310)/KII(300)]2 = 2, so KII(310) = √2 · KII(300) ...(9). By (3) and (9): 2 × KI(310) = √2 · KII(300) ...(10).
KII(300) = (2/√2) × 0.0231 = √2 × 0.0231 = 3.27 × 10-2 min-1 = 0.0327 min-1.
Teacher's Note: Same temperature interval, so log K ratios scale with Ea; halved Ea square-roots the factor.
Exam Note: Halved Ea square-roots the temperature factor.
Question 32. In the Arrhenius equation for a certain reaction, the values of A and Ea (energy of activation) are 4 × 1013 sec-1 and 98.6 kJ mol-1 respectively. If the reaction is of first order, at what temperature will its half-life period be 10 minute? (IIT 1990)
Solution. K = A·e-Ea/RT with A = 4×1013 s-1, Ea = 98.6×103 J mol-1, t1/2 = 10 × 60 s.
For first order K = 0.693/600 s-1, so 0.693/600 = 4×1013·e-(98.6×103)/(8.314T)
log10(0.693/600) = log10(4×1013) − 98.6×103/(8.314 × 2.303 × T)
Hence T = 311.35 K.
Teacher's Note: First order K = 0.693/t1/2 in s-1; then solve Arrhenius equation for T.
Exam Note: Half-life in seconds; solve for T not Ea.
Question 33. A compound (R) undergoes parallel path reactions involving n steps as shown below: R → P1 (K, E); R → P2 (2K, 2E); R → P3 (3K, 3E); ... ; R → Pn (nK, nE). Where K and E represent rate constant and energy of activations. Calculate the overall rate constant and overall energy of activation.
Solution. In parallel path reactions, rate constants are additive: Kav = K1 + K2 + ... + Kn = K + 2K + ... + nK = (n/2)(n + 1)K.
With K = A·e-E/RT: Kav = A1e-E/RT + 2A2e-2E/RT + ... + nAne-nE/RT ...(i), and also Kav = Aave-Eav/RT ...(ii).
Differentiating (ii) with respect to T (ln Kav form, d ln K/dT = E/RT2): Eav·Kav = KE + 2K·2E + ... + nK·nE = KE[12 + 22 + ... + n2] = KE·n(n + 1)(2n + 1)/6.
Eav × (n/2)(n + 1)K = K·E·n(n + 1)(2n + 1)/6, so Eav = (E/3)(2n + 1).
Teacher's Note: Parallel paths add rate constants; overall Ea is the K-weighted average of the individual Ea values.
Exam Note: Sum of squares formula gives the overall activation energy.
Question 34. Two I order reactions having same reactant concentrations proceed at 25°C at the same rate. The temperature coefficient of the rate of the first reaction is 2 and that of second reaction is 3. Find the ratio of the rates of these reactions at 75°C.
Solution. For a first order reaction r = K[C]1, so R1/R2 = K1/K2, and the temperature coefficient is R35/R25 = K35/K25 = a. Similarly R45/R35 = a, so R45/R25 = a2, and likewise R75/R25 = a5.
For reaction I: (R75)I = 25 × (R25)I; for reaction II: (R75)II = 35 × (R25)II.
Since (R25)I = (R25)II: (R75)II/(R75)I = 35/25 = 243/32 = 7.59.
Corrected: the book prints 7.9537, which is a miscalculation of 35/25; the correct value is 7.59.
Teacher's Note: Temperature coefficient multiplies the rate every 10°C; 25°C to 75°C is five steps.
Exam Note: Five 10°C steps; ratio is (3/2)5.
Question 35. The decomposition of ammonia on platinum surface follow the change, 2NH3 → N2 + 3H2. (a) What does −d[NH3]/dt denote? (b) What does d[N2]/dt and d[H2]/dt denote? (c) If the decomposition is zero order then what are the rate of production of N2 and H2, if K = 2.5 × 10-4 M s-1?
Solution. (a) −d[NH3]/dt denotes the rate of decomposition of NH3.
(b) d[N2]/dt and d[H2]/dt denote the rate of formation of N2 and the rate of formation of H2.
(c) −(1/2)d[NH3]/dt = d[N2]/dt = (1/3)d[H2]/dt = K[NH3]0 (zero order), so d[N2]/dt = K = 2.5 × 10-4 M s-1 and d[H2]/dt = 3K = 3 × 2.5×10-4 = 7.5 × 10-4 M s-1.
(d) −d[NH3]/dt = K1[NH3]/(1 + K2[NH3]). (i) If [NH3] is very very low, 1 + K2[NH3] ≈ 1, so −d[NH3]/dt = K1[NH3], i.e. first order. (ii) If [NH3] is very very high, −d[NH3]/dt = K1/(1/[NH3] + K2) ≈ K1/K2 = K′, i.e. zero order.
Teacher's Note: Divide each rate by its stoichiometric coefficient; saturation kinetics change from first to zero order as concentration rises.
Exam Note: Divide by stoichiometric coefficients before equating rates.
Question 36. Dinitrogen pentaoxide decomposes as follows: N2O5 → 2NO2 + ½O2. If, −d[N2O5]/dt = K1[N2O5]; d[NO2]/dt = K2[N2O5]; d[O2]/dt = K3[N2O5]. Derive a relation between K1, K2 and K3.
Solution. For the given change, −d[N2O5]/dt = +(1/2)d[NO2]/dt = 2 d[O2]/dt.
Substituting the given values: K1[N2O5] = (1/2)K2[N2O5] = 2K3[N2O5]
Therefore 2K1 = K2 = 4K3.
Teacher's Note: Rate of reaction is the same for every species once divided by its coefficient (here 1, 2 and 1/2).
Exam Note: Divide each rate by the coefficient from the balanced equation.
Question 37. The decomposition of ozone occurs as 2O3(g) → 3O2, following the rate law: −d[O3]/dt = K [O3]2/[O2]. What are the units of rate and rate constant?
Solution. Unit of rate = mol litre-1 time-1.
The overall order of the rate law is 2 − 1 = 1, so rate = K[reactant]1 and K = rate/[reactant] = (mol litre-1 time-1)/(mol litre-1) = time-1.
Teacher's Note: Order is the sum of exponents with signs: [O3]2 over [O2]1 gives net order one.
Exam Note: Subtract exponent in the denominator when finding order.
Question 38. The rate law has the form; rate = K[A][B]3/2, can the reaction be an elementary process?
Solution. Rate law with order equal to molecularity (necessarily an integer) is an elementary process. For the given reaction, O.R. = 1 + 3/2 = 5/2. Since molecularity can never be fractional, the order is not equal to molecularity, and the given reaction is not an elementary process.
Teacher's Note: Molecularity is always a whole number, so a fractional order proves a complex mechanism.
Exam Note: Fractional order means not elementary; state the reason.
Question 39. For the chemical reaction, 5Br- + BrO3- + 6H+ → 3Br2 + 3H2O, the rate expression is rate = K[Br-][BrO3-][H+]2, calculate: (a) order of reaction. (b) apparent molecularity of reaction.
Solution. Order of reaction = 1 + 1 + 2 = 4.
Apparent molecularity = 5 + 1 + 6 = 12 (sum of the stoichiometric coefficients of the reactants).
Teacher's Note: Order comes from the rate law exponents; apparent molecularity from the balanced equation's reactant coefficients.
Exam Note: Do not confuse order (rate law) with molecularity (equation).
Question 40. In a reaction, 2A → Products, the concentration of A decreases from 0.5 mol litre-1 to 0.4 mol litre-1 in 10 minute. Calculate average rate during this interval.
Solution. Rate of reaction = (1/2) × rate of disappearance of A = (1/2)(−Δ[A]/Δt) = (1/2)[(0.5 − 0.4)/10] = 0.005 mol L-1 minute-1.
Teacher's Note: For 2A → products, rate of reaction is half the rate of disappearance of A.
Exam Note: Divide by the coefficient 2.
Question 41. The progress of the reaction A ⇌ nB with time is presented in the figure (concentration in mol/l against time in hour; see note). Determine: (i) the value of n, (ii) the equilibrium constant, K and (iii) the initial rate of conversion of A. (IIT 1994)
Solution. Loss in concentration of A in the 1st hour = 0.6 − 0.5 = 0.1; gain in concentration of B in the 1st hour = 0.2 − 0 = 0.2 (read from the graph: A falls from 0.6 to 0.5 at 1 hr and finally to 0.3; B rises from 0 to 0.2 at 1 hr and finally to 0.6).
(i) 0.1 mole of A changes to 0.2 mole of B in a given time, so n = 2.
(ii) Equilibrium constant K = [B]n/[A] = [0.6]2/0.3 = 1.2 mol litre-1 (equilibrium is attained after 5 hr, where [B] = 0.6 and [A] = 0.3).
(iii) Initial rate of conversion of A = change in concentration of A during the 1st hour = 0.1/1 = 0.1 mol litre-1 hour-1.
Teacher's Note: Ratio of the changes in A and B over the same interval gives n; equilibrium plateau values give K.
Exam Note: Use equilibrium plateau values, not initial ones, for K.
Question 42. A 22.4 litre flask contains 0.76 mm of ozone at 25°C. Calculate: (i) the concentration of oxygen atom needed so that the reaction O + O3 → 2O2 having rate constant equal to 1.5 × 107 litre mol-1 sec-1 can proceed with a rate of 0.15 mol litre-1 sec-1. (ii) the rate of formation of oxygen under this condition.
Solution. (i) The unit of the rate constant suggests a second order reaction, so rate of reaction = K[O3][O].
[O3] = n/V = P/RT = 0.76/(0.0821 × 298 × 760) (pressure 0.76 mm Hg = 0.76/760 atm).
0.15 = 1.5×107 × [0.76/(0.0821×298×760)] × [O], so [O] = 2.45 × 10-4 mol litre-1, i.e. n/V for O = 2.45×10-4.
Equivalent pressure PO = 2.45×10-4 × 0.0821 × 298 = 5.99 × 10-3 atm = 5.99×10-3 × 760 mm = 4.5 mm.
(ii) Rate of reaction = (1/2) d[O2]/dt, so rate of formation of O2 = 2 × 0.15 = 0.30 mol L-1 s-1.
Teacher's Note: Units of K tell the order; convert the ozone pressure in mm Hg to molarity with P/RT.
Exam Note: Convert mm Hg to atm before using R.
Question 43. The rate constant for the reaction: CO2 + OH- → HCO3- in the aqueous solution is 4 × 10-3 litre mol-1 sec-1. Calculate the number of mole of CO2 and OH- used up per second when [CO2] and [OH-] are 10-6 and 10-1 mol litre-1. Also predict the mole of HCO3- formed per second.
Solution. Rate of reaction = −d[CO2]/dt = −d[OH-]/dt = d[HCO3-]/dt.
The unit of K suggests second order. Thus rate of reaction = K[CO2][OH-] = 4×10-3 × 10-6 × 10-1 = 4 × 10-10 mol L-1 s-1.
So CO2 and OH- used up = 4 × 10-10 mol per litre per second each, and HCO3- formed = 4 × 10-10 mol per litre per second.
Teacher's Note: One mole each of CO2 and OH- gives one mole of HCO3-, so all three rates are equal.
Exam Note: All three species change at the same rate (1:1:1).
Question 44. For a reaction 3A → Products, it is found that the rate of reaction doubles, if concentration of A is increased four times, calculate order of reaction.
Solution. Rate = K[Reactant]n. If [Reactant] = a, rate = r1, so r1 = K[a]n; if [Reactant] = 4a, rate = 2r1, so 2r1 = K[4a]n.
Dividing: 2 = 4n, so n = 1/2.
Teacher's Note: Ratio of rates equals (ratio of concentrations)n; 4n = 2 gives a half order.
Exam Note: Take the ratio so K cancels.
Question 45. The rate of a reaction starting with initial concentration of 2 × 10-3 M and 1 × 10-3 M are equal to 2.40 × 10-4 M s-1 and 0.60 × 10-4 M sec-1 respectively. Calculate the order of reaction w.r.t. reactant and also the rate constant.
Solution. (r0)1 = K[A0]1a and (r0)2 = K[A0]2a (a is the order of reaction).
(r0)1/(r0)2 = ([A0]1/[A0]2)a, so a = [log(r0)1 − log(r0)2]/[log[A0]1 − log[A0]2] = [log(2.40×10-4) − log(0.60×10-4)]/[log(2×10-3) − log(1×10-3)] = (−3.62 + 4.22)/(−2.70 + 3) = 2.
So r = K[A]2 and K = r/[A]2 = 2.40×10-4/[2×10-3]2 = 60 mol-1 L s-1.
Teacher's Note: Concentration doubles and rate quadruples, so second order; K comes from any one data point.
Exam Note: Rate ratio 4 for concentration ratio 2 means order 2.
Question 46. The reaction 2A + B + C → D + 2E is found to be I order in A, II order in B and zero order in C. (a) Write rate expression. (b) What is the effect on rate on increasing the conc. of A, B and C two times?
Solution. (a) Rate = K[A]1[B]2[C]0.
(b) Let initial concentrations of A, B and C be a, b, c. r1 = K·a1b2c0 ...(1). If A, B and C are doubled: r2 = K(2a)1(2b)2(2c)0 ...(2).
By (1) and (2): r1/r2 = 1/8, so r2 = 8r1.
Teacher's Note: Zero-order species do not affect the rate; the other factors multiply as 21 × 22.
Exam Note: Zero order in C: doubling C changes nothing.
Question 47. For 2A + B + C (excess) → Products, calculate the: (a) rate expression. (b) units of rate and rate constant. (c) effect on rate, if concentration of A is doubled and of B is tripled.
Solution. (a) Rate = K[A]2[B]1[C]0 (C is in excess, so it appears with zero order).
(b) Unit of rate = mol litre-1 time-1; unit of rate constant = L2 mol-2 time-1.
(c) r1 = K(a)2(b)1(c)0 ...(1). With [A] = 2a and [B] = 3b: r2 = K(2a)2(3b)1(c)0 ...(2). By (1) and (2): r1/r2 = 1/12, so r2 = 12r1.
Teacher's Note: Coefficient 2 on A gives second order in A; excess species gives zero order. Rate changes by 22 × 3.
Exam Note: Excess reactant: order zero; multiply the factors.
Question 48. The rate constant is numerically the same for three reactions of first, second and third order respectively. Which reaction should be the fastest and is this true for all ranges of concentrations?
Solution. Consider A → Product. r1 = K[A]1 (I order) ...(1); r2 = K[A]2 (II order) ...(2); r3 = K[A]3 (III order) ...(3). K is the same in all.
If [A] = 1: r1 = r2 = r3.
If [A] < 1: r1 > r2 > r3.
If [A] > 1: r3 > r2 > r1.
So no single reaction is the fastest; the statement is not true for all ranges of concentration.
Teacher's Note: Ordering of rates flips at [A] = 1 M because 1 raised to any power is 1.
Exam Note: Answer depends on whether [A] is below, at or above 1 M.
Question 49. Find the order of reaction for the rate expression rate = K[A][B]2/3. Also suggest the units of rate and rate constant for this expression.
Solution. Rate = K[A][B]2/3, so O.R. = 1 + 2/3 = 5/3 = 1.67.
Unit of rate (dx/dt) is mol L-1 time-1.
Unit of rate constant K = (dx/dt)/[Reactant]5/3 = (mol litre-1 time-1)/(mol litre-1)5/3 = mol-2/3 L2/3 time-1.
Teacher's Note: Add the exponents for order; unit of K is (mol L-1)1−n time-1.
Exam Note: Unit of K follows from order n = 5/3.
Question 50. The rate law of a chemical reaction given below: 2NO + O2 → 2NO2 is given as rate = K[NO]2[O2]. How will the rate of reaction change, if the volume of reaction vessel is reduced to 1/4th of its original value?
Solution. Rate = K[NO]2[O2]. Let a mole of NO and b mole of O2 be in a vessel of V litre: r1 = K[a/V]2[b/V] ...(1).
If the volume is reduced to V/4 for the same moles: r2 = K[a/(V/4)]2[b/(V/4)] = 64K[a/V]2[b/V] ...(2).
By (1) and (2): r2/r1 = 64, i.e. the rate becomes 64 times.
Teacher's Note: Cutting volume to 1/4 multiplies every concentration by 4; overall order 3 gives 43.
Exam Note: Volume 1/4 gives concentration x4; raise to order.
Question 51. Calculate the order of reaction for which rate becomes half if volume of container having same amount of reactant is doubled. (Assume gaseous phase reaction)
Solution. Rate = K[Reactant]n. Case I: a mole in V litre: r1 = K[a/V]n ...(1). Case II: volume doubled, rate becomes half: r1/2 = K[a/2V]n ...(2).
By (1) and (2): 2 = (2)n, so n = 1.
Note: this works for gaseous phase reactions; it is not valid for solution phase reactions.
Teacher's Note: Doubling the volume halves the concentration; rate halving means order one.
Exam Note: Gas-phase only; solution volume does not dilute moles this way.
Question 52. The rate of a reaction is given by dx/dt = K(a − x)/(1 + bx), where a is the initial concentration of the reactant and K, b are constants. x is the concentration of product at time t. What is half-life of this reaction?
Solution. dx/dt = K[(a − x)/(1 + bx)]. On integrating: ∫(1 + bx)/(a − x) dx = K∫dt.
Writing 1 + bx = (1 + ab) − b(a − x): ∫[(1 + ab)/(a − x)]dx − b∫dx = Kt + C, so −(1 + ab) ln(a − x) − bx = Kt + C.
At t = 0, x = 0: C = −(1 + ab) ln a, so Kt = (1 + ab) ln[a/(a − x)] − bx.
At t = t1/2, x = a/2: Kt1/2 = (1 + ab) ln 2 − ab/2 = ln 2 + ab ln 2 − 0.5ab.
t1/2 = [ln 2 + ab(ln 2 − 0.5)]/K
Teacher's Note: Split the integrand by writing 1 + bx in terms of (a − x), then put x = a/2.
Exam Note: Use natural logs; set x = a/2 for half-life.
Question 53. The rate of a first order reaction is 0.04 mol litre-1 sec-1 at 10 minute and 0.03 mol litre-1 at 20 minute after initiation. Find the half-life of the reaction. (IIT 2001)
Solution. Rate = K[A]. 0.04 = K[A]10 and 0.03 = K[A]20, so [A]10/[A]20 = 0.04/0.03 = 4/3.
For the 10 minute interval, t = (2.303/K) log([A]10/[A]20): 10 = (2.303/K) log(4/3), so K = (2.303/10) log(4/3) = 0.0288 min-1.
t1/2 = 0.693/K = 0.693/0.0288 = 24.06 min (about 24.1 min).
Teacher's Note: First order rate is proportional to concentration, so the rate ratio equals the concentration ratio.
Exam Note: Rate ratio equals concentration ratio for first order.
Question 54. The rate law for the following reaction; Ester + H+ → Acid + Alcohol, is dx/dt = K (ester)[H3O+]0. What would be the effect on rate if: (a) concentration of ester is doubled? (b) concentration of H+ ion is doubled?
Solution. Rate = K[ester]1[H3O+]0.
(a) If [ester] is doubled, r2 = K[2a]1[b]0, so r2 = 2r1: rate doubles.
(b) If [H3O+] is doubled, r3 = K[a]1[2b]0 = r1: rate is unchanged.
Teacher's Note: H+ is a catalyst here and appears with zero order, so changing it leaves the rate unchanged.
Exam Note: Zero order in acid: no effect on rate.
Question 55. The rate of change in concentration of C in the reaction 2A + B → 2C + 3D was reported as 1.0 mol litre-1 sec-1. Calculate the reaction rate as well as rate of change of concentration of A, B and D.
Solution. −(1/2)d[A]/dt = −d[B]/dt = (1/2)d[C]/dt = (1/3)d[D]/dt = rate of reaction. Given d[C]/dt = 1.0 mol litre-1 sec-1:
−d[A]/dt = d[C]/dt = 1.0 mol L-1 s-1
−d[B]/dt = (1/2)d[C]/dt = 0.5 mol L-1 s-1
d[D]/dt = (3/2)d[C]/dt = (3/2) × 1 = 1.5 mol L-1 s-1
Rate of reaction = (1/2)d[C]/dt = 0.5 mol L-1 s-1.
Teacher's Note: Rate of reaction is the rate of any species divided by its coefficient; convert between species by ratio.
Exam Note: Convert using stoichiometric coefficient ratios; sign for reactants.
Question 56. Write the rate law expression and find the rate constant of the reaction A + B → Product. Also calculate half-life period. (IIT 2004)
[A0] mol litre-1, [B0] mol litre-1, Rate [R0] mol litre-1 sec-1: (0.1, 0.2, 0.05); (0.2, 0.2, 0.10); (0.1, 0.1, 0.05)
Solution. Rate = K[A]m[B]n.
Case I: 0.05 = K[0.1]m[0.2]n ...(1); Case II: 0.10 = K[0.2]m[0.2]n ...(2); Case III: 0.05 = K[0.1]m[0.1]n ...(3).
By (1) and (2): 1/2 = (1/2)m, so m = 1. By (1) and (3): 1 = (1/2)n, so n = 0.
Thus Rate = K[A]1[B]0, O.R. = 1 + 0 = 1.
0.05 = K[0.1]1[0.2]0, so K = 0.05/0.1 = 0.5 s-1.
For a first order reaction t1/2 = 0.693/K = 0.693/0.5 = 1.386 s (the book prints the unit as sec-1, which is a misprint for seconds).
Teacher's Note: Compare runs that change only one concentration at a time to isolate each order.
Exam Note: Vary one concentration at a time; t1/2 has unit of time.
Question 57. For the reaction A + B → C, the following data were obtained. In the first experiment, when the initial concentrations of both A and B are 0.1 M, the observed initial rate of formation of C is 1 × 10-4 mol litre-1 minute-1. In the second experiment when the initial concentrations of A and B are 0.1 M and 0.3 M, the initial rate is 9.0 × 10-4 mol litre-1 minute-1. In the third experiment when the initial concentrations of both A and B are 0.3 M, the initial rate is 2.7 × 10-3 mol litre-1 minute-1. (a) Write rate law for this reaction. (b) Calculate the value of specific rate constant for this reaction. (Roorkee 1987)
Solution. Let rate = K[A]m[B]n.
r1 = 1×10-4 = K[0.1]m[0.1]n ...(1); r2 = 9×10-4 = K[0.1]m[0.3]n ...(2); r3 = 2.7×10-3 = K[0.3]m[0.3]n ...(3).
(a) By (1) and (2): 1×10-4/9×10-4 = (1/3)n, so n = 2. By (2) and (3): 9×10-4/27×10-4 = (1/3)m, so m = 1. Rate = K[A]1[B]2.
(b) From (1): 1×10-4 = K[0.1]1[0.1]2, so K = 10-1 = 0.1 L2 mol-2 min-1.
Teacher's Note: Experiments 1 and 2 change only B; experiments 2 and 3 change only A.
Exam Note: Pair experiments that vary a single reactant.
Question 58. For the reaction, 2NO + H2 → N2O + H2O, the value of −dP/dt was found to be 1.5 Pa s-1 for a pressure of 359 Pa of NO and 0.25 Pa s-1 for a pressure of 152 Pa of NO. The pressure of H2 being constant. If pressure of NO was kept constant, the value of −dP/dt was found 1.60 Pa s-1 for a pressure of H2 289 Pa and 0.79 Pa s-1 for a pressure of 147 Pa of H2. Calculate the order of reaction.
Solution. Rate of reaction = −(1/2)dPNO/dt = −dPH2/dt.
For PH2 constant: −(1/2)dPNO/dt = 1.5 = K(359)m(PH2)n and 0.25 = K(152)m(PH2)n, so 1.5/0.25 = (359/152)m, giving m = 2.
For PNO constant: −dPH2/dt = 1.60 = (PNO)m(289)n and 0.79 = (PNO)m(147)n, so 1.60/0.79 = (289/147)n, giving n = 1.
Rate = K[PNO]2[PH2]1, so order of reaction = 2 + 1 = 3.
Teacher's Note: Hold one pressure constant and compare rates; the ratios 6.0 and 2.03 round to integer orders 2 and 1.
Exam Note: Round ratios to the nearest whole-number order.
Question 59. The data given below are for the reaction of NO and Cl2 to form NOCl at 295 K.
[Cl2], [NO], initial rate (mol litre-1 sec-1): (0.05, 0.05, 1 × 10-3); (0.15, 0.05, 3 × 10-3); (0.05, 0.15, 9 × 10-3). (a) What is the order with respect to NO and Cl2 in the reaction? (b) Write the rate expression. (c) Calculate the rate constant. (d) Determine the reaction rate when conc. of Cl2 and NO are 0.2 M and 0.4 M respectively. (Roorkee 1993)
Solution. Rate = K[Cl2]m[NO]n ...(1).
1×10-3 = K[0.05]m[0.05]n ...(2); 3×10-3 = K[0.15]m[0.05]n ...(3); 9×10-3 = K[0.05]m[0.15]n ...(4).
By (2) and (3): m = 1. By (2) and (4): n = 2.
(a) Order with respect to NO is 2 and with respect to Cl2 is 1.
(b) Rate expression: r = K[Cl2]1[NO]2.
(c) K = r/([Cl2][NO]2) = 1×10-3/([0.05]1[0.05]2) = 8 L2 mol-2 s-1.
(d) r = K[Cl2][NO]2 = 8[0.2]1[0.4]2 = 0.256 mol L-1 s-1.
Teacher's Note: Tripling NO triples nothing but multiplies rate by 9, so second order in NO; tripling Cl2 triples the rate.
Exam Note: Tripling a reactant: factor 3 means order 1, 9 means 2.
Question 60. The following data are for the reaction A + B → Products:
Conc. of A (M), Conc. of B (M), Initial rate (mol L-1s-1): (0.1, 0.1, 4.0 × 10-4); (0.2, 0.2, 1.6 × 10-3); (0.5, 0.1, 1.0 × 10-2); (0.5, 0.5, 1.0 × 10-2). (a) What is the order with respect to A and B for the reaction? (b) Calculate the rate constant. (c) Determine the reaction rate when the concentrations of A and B are 0.2 M and 0.35 M respectively. (Roorkee 1995)
Solution. (a) Rate = K[A]2[B]0 (comparing runs 3 and 4, changing B alone has no effect, so zero order in B; comparing runs 1 and 3, A × 5 gives rate × 25, so second order in A).
(b) K = 4.0×10-4/(0.1)2 = 4 × 10-2 L mol-1 s-1.
(c) Rate = 4×10-2 × (0.2)2 = 16 × 10-4 mol L-1 s-1 (independent of [B]).
Teacher's Note: Runs 3 and 4 share [A] and differ in [B]; same rate shows zero order in B.
Exam Note: Find the order of the species whose change leaves rate unchanged.
Question 61. The chemical reaction between K2C2O4 and HgCl2 is, 2HgCl2 + K2C2O4 → 2KCl + 2CO2 + Hg2Cl2. The weights of Hg2Cl2 precipitated from different solutions in given time are as:
Time, HgCl2 (mol litre-1), K2C2O4 (mol litre-1), Hg2Cl2 formed (mol litre-1): (60, 0.0418, 0.404, 0.0032); (65, 0.0836, 0.404, 0.0068); (120, 0.0836, 0.202, 0.0031). Calculate order of reaction.
Solution. Rate = K[HgCl2]m[K2C2O4]n:
0.0032/60 = K[0.0418]m[0.404]n ...(1); 0.0068/65 = K[0.0836]m[0.404]n ...(2); 0.0031/120 = K[0.0836]m[0.202]n ...(3).
Solving (1), (2) and (3): m = 1 and n = 2, so O.R. = m + n = 1 + 2 = 3.
Teacher's Note: Rate is amount formed per unit time; doubling HgCl2 doubles the rate and halving oxalate cuts it by four.
Exam Note: Rate = amount formed divided by time.
Question 62. For a gaseous reaction 2A + B2 → 2AB, the following rate data were obtained.
Rate of disappearance of B2 (mol litre-1), [A], [B2]: (1.8 × 10-3, 0.015, 0.15); (1.08 × 10-2, 0.090, 0.15); (5.4 × 10-3, 0.015, 0.45). Calculate: (a) the rate constant, (b) rate of formation of AB when [A] = 0.02 and [B2] = 0.04.
Solution. Rate = K[A]m[B2]n (rate of disappearance of B2).
1.8×10-3 = K[0.015]m[0.15]n ...(1); 1.08×10-2 = K[0.09]m[0.15]n ...(2); 5.4×10-3 = K[0.015]m[0.45]n ...(3).
By (1) and (2): 1.8×10-3/1.08×10-2 = (0.015/0.09)m, so m = 1. By (1) and (3): 1.8×10-3/5.4×10-3 = (0.15/0.45)n, so n = 1. Rate = K[A]1[B2]1, O.R. = 2.
(a) 1.8×10-3 = K(0.015)(0.15), so K = 0.8 litre mol-1 time-1.
(b) (1/2)d[AB]/dt = −d[B2]/dt, so d[AB]/dt = 2(−d[B2]/dt) = 2K[A][B2] = 2 × 0.8 × (0.02)(0.04) = 1.28 × 10-3 mol litre-1 time-1.
Teacher's Note: Rate is for B2 disappearance; AB forms twice as fast because of its coefficient 2.
Exam Note: AB forms at twice the rate B2 disappears.
Question 63. For a reaction at 800°C, 2NO + 2H2 → N2 + 2H2O, the following data were obtained.
[NO] × 10-4 mol litre-1, [H2] × 10-3 mol litre-1, −½ d[NO]/dt × 10-4 mol litre-1 min-1: (i) 1.5, 4.0, 4.4; (ii) 1.5, 2.0, 2.2; (iii) 0.5, 2.0, 0.24. What is the order of this reaction with respect to NO and H2? Also calculate rate constant.
Solution. Let the rate expression be r = K[NO]m[H2]n ...(1), with r = −(1/2)d[NO]/dt.
Case I: [NO] × 10-4 = 1.5, so [NO] = 1.5×104; [H2] × 10-3 = 4.0, so [H2] = 4.0×103; −(1/2)d[NO]/dt × 10-4 = 4.4, so r = 4.4×104. By (1): 4.4×104 = K[1.5×104]m[4.0×103]n ...(2).
Case II: 2.2×104 = K[1.5×104]m[2.0×103]n ...(3). Case III: 0.24×104 = K[0.5×104]m[2.0×103]n ...(4).
By (2) and (3): 2 = (2)n, so n = 1. By (3) and (4): 9.16 = (3)m, so m = 2.
Order with respect to NO is 2 and with respect to H2 is 1.
Rate constant from (2) with m = 2, n = 1: 4.4×104 = K[1.5×104]2[4.0×103]1, so K = 4.88 × 10-8 mol-2 L2 min-1 (4.89 × 10-8 to three figures; values taken exactly as the table headers are printed, so K carries the same scaling).
Teacher's Note: Fix NO to find the H2 order, fix H2 to find NO order; ratio 9.16 rounds to 32.
Exam Note: Round 9.16 to 9 (second order); halve H2, halve rate.
Question 64. For a reaction a graph was plotted between reactant concentration C and time t as shown in figure (C = 40 at t = 0, 20 at t = 5, 10 at t = 10, 5 at t = 15; a smooth decaying curve). Identify the order of the reaction with respect to the reactant. Can the concentration of the reactant be theoretically zero after infinite time? (Roorkee 1992)
Solution. From the graph it is evident that the concentration of 40 reduces to 20 in 5 minute, 20 reduces to 10 in the next 5 minute, and 10 reduces to 5 in again 5 minute. This shows that the half-life period is independent of concentration, a characteristic of a first order reaction. In a first order reaction the concentration of the reactant can never be theoretically zero (it decays exponentially).
Teacher's Note: Constant successive half-lives are the signature of first order kinetics.
Exam Note: Constant half-life regardless of concentration means first order.
Question 65. In the decomposition of N2O5, the plot between the reciprocal of concentration of the reactant and the time was found to be linear as shown in figure. Determine the order of reaction. (The figure shows 1/Conc. on the vertical axis against Time on the horizontal axis as a straight line rising from the axis.)
Solution. The reaction is of second order, because for II order K = (1/t)·x/[a(a − x)], or t = (1/K)·x/[a(a − x)], i.e. the plot of time (t) versus 1/conc. (or 1/conc. versus time) is a straight line (the figure shows 1/Conc. on the vertical axis rising linearly with Time).
Teacher's Note: For second order 1/[A] = 1/[A]0 + Kt, a straight line with slope K.
Exam Note: Linear 1/C versus t identifies second order.
Question 66. What will be the initial rate of a reaction if its rate constant is 10-3 min-1 and the concentration of reactant is 0.2 mol dm-3? How much of reactant will be converted into products in 200 minute? (Roorkee 1992)
Solution. Since K has unit min-1, the given reaction is of I order.
Rate = K[ ]1 = 10-3 × 0.2 = 2 × 10-4 mol dm-3 min-1.
K = (2.303/t) log10[a/(a − x)]: 10-3 = (2.303/200) log10[100/(100 − x)], so x = 18.12 % of the reactant is converted (18.13 % by exact calculation).
Teacher's Note: The unit min-1 of K identifies first order; percentage converted follows from the integrated equation.
Exam Note: Unit of K identifies order; use percentages for a and x.
Question 67. The rate constant for an isomerisation reaction, A → B is 4.5 × 10-3 min-1. If the initial concentration of A is 1 M, calculate the rate of the reaction after 1 hr. (IIT 1999)
Solution. A → B, K = 4.5×10-3 min-1, [A]0 = 1 M. For first order K = (2.303/t) log10[a/(a − x)].
At t = 60 min: 4.5×10-3 = (2.303/60) log10[1/(a − x)], so (a − x) = 0.7634.
Rate after 60 minute = K(a − x) = 4.5×10-3 × 0.7634 = 3.4354 × 10-3 mol L-1 min-1.
Teacher's Note: Find the remaining concentration with the integrated equation; instantaneous rate is K times that.
Exam Note: Time 1 h = 60 min to match K in min-1.
Question 68. A substance reacts according to I order kinetics and rate constant for the reaction is 1 × 10-2 sec-1. If its initial concentration is 1 M, (a) What is initial rate? (b) What is rate after 1 minute? (Roorkee 1993)
Solution. (a) Initial rate = K[ ]1 = 1×10-2[1] = 1 × 10-2 mol L-1 s-1.
(b) K = (2.303/t) log10[a/(a − x)]: 10-2 = (2.303/60) log10[1/(1 − x)] (t = 1 minute = 60 s), so (1 − x) = 0.549.
Rate after 1 minute = K[0.549] = 10-2 × 0.549 = 5.49 × 10-3 mol L-1 s-1.
Teacher's Note: K is in s-1, so convert 1 minute to 60 s; rate follows concentration left.
Exam Note: Convert minutes to seconds before using K in s-1.
Question 69. Show that for a first order reaction, time required for 99% completion is twice for the time required for the completion of 90% of the reaction.
Solution. t99% = (2.303/K) log10[100/(100 − 99)] ...(1) (a = 100, x = 99) and t90% = (2.303/K) log10[100/(100 − 90)] ...(2) (a = 100, x = 90).
By (1) and (2): t99%/t90% = log10100/log1010 = 2, so t99% = 2 × t90%.
Teacher's Note: Logs are log 100 = 2 and log 10 = 1, so the ratio is exactly two.
Exam Note: Substitute a = 100 and x = 99, 90.
Question 70. Show that t1/2 / t3/4 for nth order reaction is a function of 'n' alone. t3/4 is the time required for concentration to become 1/4 of original concentration.
Solution. A → Products, −dCA/dt = KCAn (order n).
Integrating: −(CA)1−n/(1 − n) = Kt + constant ...(1). At t = 0, CA = C0, so constant = −C01−n/(1 − n) ...(2).
Hence Kt = [1/(n − 1)][CA1−n − C01−n] ...(3).
If CA = C0/2 at t = t1/2: Kt1/2 = [1/(n − 1)][(C0/2)1−n − C01−n] = [C01−n/(n − 1)][2n−1 − 1] ...(4).
If CA = C0/4 at t = t3/4: Kt3/4 = [C01−n/(n − 1)][4n−1 − 1] ...(5).
By (4) and (5): t1/2/t3/4 = (2n−1 − 1)/(4n−1 − 1), so the ratio depends only on n.
Teacher's Note: Integrate the nth order law; C0 and K cancel in the ratio.
Exam Note: C0 and K cancel; valid for n not equal to 1.
Question 71. In a reaction, the decrease in reactant's concentration is 20% in 20 minute and 40% in 40 minute. Calculate order of reaction and rate constant.
Solution. For a zero order reaction t = x/K, or K = x/t.
If t = t20% = 20 minute, x = 20, then K = 20/20 = 1 mol L-1 time-1. If t = t40% = 40 minute, x = 40, then K = 40/40 = 1 mol L-1 time-1 (the same value, taking the initial concentration as 100 units).
The constant K shows that the reaction is of zero order, with K = 1 (concentration unit per minute, i.e. 1 % of the initial concentration per minute).
Teacher's Note: Equal amounts consumed in equal times (1 % per minute) means a constant rate, the mark of zero order.
Exam Note: Constant amount decomposed per unit time means zero order.
Question 72. The rate of a certain reaction depends on concentration according to the equation: −dC/dt = K1C/(1 + K2C), what will be the order of reaction, where (a) concentration is very very high, (b) very very low?
Solution. −dC/dt = K1C/(1 + K2C) = K1/(1/C + K2).
(a) If C is very very high, 1/C is very small and negligible, so −dC/dt = K1/K2 = constant. The order of reaction is zero.
(b) If C is very low, 1 + K2C ≈ 1 = K′, so −dC/dt = (K1/K′)C = K″·C. The order of reaction is unity (first order).
Teacher's Note: Saturation kinetics: at high concentration the rate hits a ceiling (zero order), at low it is proportional to C.
Exam Note: High C: denominator dominates, rate constant.
Question 73. The rate expression for a reaction is −dC/dt = α·C/(1 + βC) where α, β > 0. Calculate the t1/2 for this reaction.
Solution. −dC/dt = αC/(1 + βC), so −dC(1 + βC)/C = α dt, or −dC/C − β dC = α dt.
Integrating: −ln C − βC = αt + constant ...(1). At t = 0, C = C0: constant = −ln C0 − βC0.
So ln(C0/C) + β(C0 − C) = αt ...(2).
At t = t1/2, C = C0/2: ln 2 + β(C0/2) = αt1/2.
t1/2 = (1/α) ln 2 + βC0/(2α).
Teacher's Note: Separate variables, integrate, then put C = C0/2; half-life depends on C0, so it is not first order.
Exam Note: Use natural log; result depends on initial concentration.
Question 74. For a homogeneous gaseous phase reaction: 2A → 3B + C, the initial pressure of reactant was P° while pressure at time 't' was P. Find the pressure after time 2t. Assume I order reaction.
Solution. 2A → 3B + C. Pressure at start: P° (A only). At time t: A = P° − 2a, B = 3a, C = a. Given P° − 2a + 3a + a = P, so P° + 2a = P ...(1), and P° − 2a = 2P° − P.
For I order: K = (2.303/t) log[P°/(P° − 2a)] = (2.303/t) log[P°/(2P° − P)] ...(2).
Let the total pressure at 2t be A: A = P° + 2x, and A of reactant = P° − 2x = 2P° − A. K = (2.303/2t) log[P°/(2P° − A)] = (2.303/t) log[P°/(2P° − A)]1/2 ...(3).
By (2) and (3): [P°/(2P° − P)]2 = P°/(2P° − A), so P°(2P° − A) = (2P° − P)2.
A = 2P° − (2P° − P)2/P° (total pressure after time 2t).
Teacher's Note: Pressure rises by 2a as 2A forms 3B + C; fraction left after 2t is that after t squared.
Exam Note: Remaining fraction after 2t is the square of that after t.
Question 75. If a reaction A → Products, the concentrations of reactant A are C0, aC0, a2C0, a3C0, ... after time interval, 0, t, 2t, 3t, ... where a is constant. Given 0 < a < 1. Show that the reaction is of I order. Also calculate the relation in K, a and t.
Solution. For I order K = (2.303/t) log[a/(a − x)].
At t, concentration = aC0: K = (2.303/t) log(C0/aC0) = (2.303/t) log(1/a). At 2t, concentration = a2C0: K = (2.303/2t) log(C0/a2C0) = (2.303/t) log(1/a). At 3t, K = (2.303/3t) log(C0/a3C0) = (2.303/t) log(1/a).
K comes out constant, so it is a first order reaction, with K = (2.303/t) log10(1/a).
Teacher's Note: Equal time intervals give equal concentration ratios (geometric progression), the signature of first order decay.
Exam Note: Constant K at t, 2t and 3t confirms first order.
Question 76. Starting with one mole of a compound A, it is found that the reaction is 3/4 completed in 1 hour. Calculate the rate constant if the reaction is of: (a) I order. (b) II order.
Solution. Given a = 1 mole, x = 3/4 mole, t = 1 hr.
(a) For I order: K = (2.303/t) log[a/(a − x)] = (2.303/1) log[1/(1 − 3/4)] = 2.303 log 4 = 1.386 hr-1.
(b) For II order: K = (1/t)·x/[a(a − x)] = (1/(1×1))·(3/4)/(1/4) = 3 L mol-1 hr-1.
Teacher's Note: 75% complete means two half-lives for first order; for second order use x/[a(a − x)] with a = 1.
Exam Note: For second order the unit of K is L mol-1 time-1.
Question 77. The half time of first order decomposition of nitramide is 2.1 hour at 15°C. NH2NO2(aq.) → N2O(g) + H2O(l). If 6.2 g of NH2NO2 is allowed to decompose, calculate: (i) time taken for NH2NO2 to decompose 99%. (ii) volume of dry N2O produced at this point measured at STP. (Roorkee 1994)
Solution. t = (2.303/K) log[a/(a − x)].
For t = t1/2, x = a/2: t1/2 = (2.303/K) log[a/(a − a/2)] ...(1). For t = t99%, x = 99a/100: t99% = (2.303/K) log[a/(a − 99a/100)] ...(2).
By (1) and (2): t99% = (log10100/log102) × t1/2 = (2/0.3010) × 2.1 = 13.95 hour.
Mole of N2O formed = (99/100) × mole of NH2NO2 taken = (99/100) × (6.2/62) = 0.099.
Volume of N2O formed at STP = 0.099 × 22.4 = 2.217 L (2.218 L by exact multiplication).
Teacher's Note: 99% decomposition takes log 100/log 2 = 6.64 half-lives; molar mass of NH2NO2 is 62 g.
Exam Note: One mole N2O per mole nitramide; 22.4 L at STP.
Question 78. In I order reaction, the concentrations of reactants 10 and 20 minute after the beginning of reaction corresponds to 13.8 and 8.25 (arbitrary units). Calculate the initial concentrations of the reactants and the velocity constant.
Solution. Given t = 10, (a − x) = 13.8; t = 20, (a − x) = 8.25; t = 0, concentration a.
K = (2.303/10) log(a/13.8) ...(1) and K = (2.303/20) log(a/8.25) ...(2).
Solving (1) and (2): 2 log(a/13.8) = log(a/8.25), so a2/190.44 = a/8.25, giving a = 23.09 (arbitrary units) and K = 5.1 × 10-2 minute-1.
Teacher's Note: Two data points with the same K give two equations; eliminating K leaves a linear equation in a.
Exam Note: Equate K from two times; solve for a first.
Question 79. Catalytic decomposition of nitrous oxide by gold at 900°C at an initial pressure of 200 mm was 50% in 53 minute and 73% in 100 minute. (Roorkee 1990) (a) What is the order of reaction? (b) Calculate velocity constant. (c) How much will it decompose in 100 minute at the same temperature but at an initial pressure of 600 mm?
Solution. K = (2.303/t) log[a/(a − x)] ...(1).
Case I: a ∝ 200 mm, x ∝ 200 × 50/100 = 100 mm, t1/2 = 53 minute: K1 = (2.303/53) log[200/(200 − 100)] = 1.307 × 10-2 min-1.
Case II: a ∝ 200 mm, x ∝ 200 × 73/100 = 146 mm, t = 100 minute: K2 = (2.303/100) log[200/(200 − 146)] = 1.309 × 10-2 min-1.
(a) Equation (1) gives the same value of K, so the reaction obeys first order.
(b) K = (K1 + K2)/2 = (1.307 + 1.309) × 10-2/2 = 1.308 × 10-2 minute-1.
(c) t1/2 ∝ (a)0 for first order, so the reaction will proceed to 73 % completion in 100 minute even if the initial pressure is 600 mm.
Teacher's Note: A constant K from two different extents of reaction confirms first order; first order extent is independent of initial pressure.
Exam Note: First order: percent decomposed independent of initial pressure.
Question 80. The decomposition of N2O5 according to equation 2N2O5(g) → 4NO2(g) + O2(g) is a first order reaction. After 30 minute from start of the decomposition in a closed vessel, the total pressure developed is found to be 284.5 mm of Hg and on complete decomposition, the total pressure is 584.5 mm of Hg. Calculate the rate constant of reaction. (IIT 1991)
Solution. 2N2O5(g) → 4NO2(g) + O2(g). Moles at t = 0: a, 0, 0; at t = 30: (a − x), 2x, x/2; at t = ∞: 0, 2a, a/2.
Number of moles ∝ pressure developed, so a ∝ P0 at t = 0; a + 3x/2 ∝ 284.5 at t = 30 minute; and 5a/2 ∝ 584.5 at t = ∞.
Thus a ∝ 2 × 584.5/5 = 233.8 (at t = 0), x ∝ 33.8 at t = 30 minute, and a − x ∝ 200.0.
K = (2.303/t) log[a/(a − x)] = (2.303/30) log(233.8/200) = 5.206 × 10-3 minute-1 (5.21 × 10-3 by exact calculation).
Teacher's Note: Total pressure at completion fixes the initial pressure; pressure rise at 30 min fixes x.
Exam Note: Final pressure is 5/2 of initial; use it for a.
Question 81. At 100°C, a gaseous reaction A → B + 2C; is observed to be of I order. On starting with pure A, at the end of 14 minute, the total pressure was found to be 264 mm of Hg. After a long time the total pressure of the system was 450 mm of Hg. Calculate: (a) initial pressure of A. (b) rate constant of reaction. (c) half-life period of reaction. (IIT 1991)
Solution. After a long time the reaction is assumed complete. A → B + 2C: moles at t = 0: a, 0, 0; at t = t: (a − x), x, 2x; at t = ∞: 0, a, 2a.
Total moles ∝ pressure: a + 2x ∝ 264 at t = 14 minute ...(1); 3a ∝ 450 at t = ∞ ...(2); a ∝ P° at t = 0 ...(3).
(a) By (2) and (3): P° = 150 mm (of Hg).
(b) From (1) and (2), x = 57: K = (2.303/14) log[150/(150 − 57)] = 3.415 × 10-2 minute-1.
(c) t1/2 = 0.693/K = 0.693/(3.415×10-2) = 20.29 minute.
Teacher's Note: Starting with pure A, final pressure is three times the initial; pressure rise gives x as 2x.
Exam Note: Final pressure is 3a, so a is one third.
Question 82. Arsine decomposes on heating to give As and H2. The decomposition studied at constant volume and temperature gives the following data.
T in hr: 0, 5.5, 6.5, 8
P in atm: 0.9654, 1.06, 1.076, 1.1
Calculate velocity constant, assuming first order reaction.
Solution. AsH3(g) → As(s) + (3/2)H2(g). Moles at t = 0: a, 0, 0; at t = t: a − x, x, 3x/2. Mole ∝ pressure (constant V and T); As is a solid, so its moles are not counted for pressure.
a ∝ 0.9654 at t = 0; a − x + 3x/2 ∝ 1.06 at t = 5.5 hr, so x ∝ 0.1892.
K1 = (2.303/5.5) log[0.9654/(0.9654 − 0.1892)] = 3.96 × 10-2 hr-1.
At t = 6.5 hr: a − x + 3x/2 ∝ 1.076, so x ∝ 0.2212; K2 = (2.303/6.5) log[0.9654/(0.9654 − 0.2212)] = 4.00 × 10-2 hr-1.
At t = 8 hr: a − x + 3x/2 ∝ 1.1, so x ∝ 0.2692; K3 = (2.303/8) log[0.9654/(0.9654 − 0.2692)] = 4.08 × 10-2 hr-1.
Average K = (K1 + K2 + K3)/3 = (3.96 + 4.00 + 4.08) × 10-2/3 = 4.01 × 10-2 hr-1.
Teacher's Note: Only gaseous moles count in pressure; total pressure rises by x/2, so x is twice the pressure rise.
Exam Note: Solid arsenic adds no pressure; x = 2 × pressure rise.
Question 83. The half-life period and initial concentration for a reaction are as follows. What is order of reaction?
Initial concentration: 350, 540, 158
t1/2: 425, 275, 941
Solution. t1/2 ∝ (a)1−n.
For I: 425 ∝ (350)1−n ...(1); for II: 275 ∝ (540)1−n ...(2); for III: 941 ∝ (158)1−n ...(3).
By (1) and (2): 425/275 = (350/540)1−n. Taking logs, log(425/275) = (1 − n) log(350/540), so n = 2 (second order).
Teacher's Note: Half-life varies as a1−n; comparing two initial concentrations gives n from a ratio of logs.
Exam Note: Half-life inversely proportional to concentration means second order.
Question 84. The inversion of cane sugar proceeds with constant half-life of 500 minute at pH = 5 for any concentration of sugar. However, if pH = 6, the half-life changes to 50 minute. Derive the rate law for inversion of cane sugar.
Solution. At pH = 5 the half-life is 500 minute for all concentrations of sugar, i.e. t1/2 ∝ [sugar]0. Thus the reaction is of I order with respect to sugar. Let rate = K[sugar]1[H+]m.
For [H+] the book writes t1/2 ∝ [H+]1−m: 500 ∝ [10-5]1−m and 50 ∝ [10-6]1−m, so 10 = (10)1−m, 1 − m = 1, m = 0, giving rate = K[sugar]1[H+]0 as printed in the book.
Corrected: for a rate law K[sugar][H+]m the half-life at fixed [H+] is t1/2 = 0.693/(K[H+]m) ∝ [H+]−m (the 1 − m rule applies to the order in the reactant whose half-life is measured, not to a constant catalyst). Then 500/50 = 10 = (10-5/10-6)−m = 10−m, so m = −1 and rate = K[sugar]1[H+]−1 (inverse in [H+], because the half-life gets shorter when [H+] falls from 10-5 to 10-6 M).
Teacher's Note: Constant half-life shows first order in sugar; how t1/2 changes with [H+] gives its order.
Exam Note: Data show faster reaction at lower [H+]: negative order in H+.
Question 85. Hydrogenation of vegetable ghee at 25°C reduces the pressure of H2 from 2 atm to 1.2 atm in 50 minute. Calculate the rate of reaction in terms of change of: (a) pressure per minute. (b) molarity per second.
Solution. (a) Rate of reaction = (change in pressure)/(time in min) = (2 − 1.2)/50 = 0.8/50 = 1.6 × 10-2 atm min-1.
(b) Change in molarity from PV = nRT: n/V = P/RT = 0.8/(0.0821 × 298) = 0.0327 mol L-1.
Rate of reaction = change in molarity/time in second = 0.0327/(50 × 60) = 1.09 × 10-5 mol L-1 s-1.
Teacher's Note: Pressure change converts to molarity through n/V = P/RT; convert minutes to seconds.
Exam Note: Use T = 298 K and R = 0.0821 L atm.
Question 86. The following data were obtained for the decomposition of NO in contact with gold surface at 900°C. Find the O.R.
Time (in minute): 15, 30, 45, 65, 80
% decomposition: 17, 32, 44.5, 57, 65
Solution. K = (2.303/t) log10[a/(a − x)] ...(1), with a = 100 and x = % decomposition.
Case I: K = (2.303/15) log[100/(100 − 17)] = 1.24 × 10-2.
Case II: K = (2.303/30) log[100/(100 − 32)] = 1.28 × 10-2.
Case III: K = (2.303/45) log[100/(100 − 44.5)] = 1.31 × 10-2.
All the values of K are almost the same (the data at 65 and 80 minute give 1.30 × 10-2 and 1.31 × 10-2 min-1), so equation (1) is valid, i.e. the reaction obeys first order kinetics.
Teacher's Note: Test the first order equation on several data points; a constant K confirms the order.
Exam Note: Constant K from several points confirms first order.
Question 87. Ethylene is produced by: C4H8 (cyclobutane) → 2C2H4 (on heating). The rate constant is 2.48 × 10-4 sec-1. In what time will the molar ratio of the ethylene to cyclobutane in reaction mixture attain the value (a) 1, (b) 100?
Solution. C4H8 → 2C2H4: moles at t = 0: a, 0; at t = t: (a − x), 2x.
Case (a): when 2x/(a − x) = 1, x = a/3. t = (2.303/K) log[a/(a − x)] = (2.303/2.48×10-4) log[a/(a − a/3)] = 1635.2 s = 27.25 minute.
Case (b): when 2x/(a − x) = 100, x = 100a/102. t = (2.303/2.48×10-4) log[a/(a − 100a/102)] = 15856.9 s = 264.2 minute.
Teacher's Note: Ratio 2x/(a − x) fixes the fraction decomposed; then use the first order equation (K is in s-1).
Exam Note: Convert seconds to minutes at the end.
Question 88. A drop of solution (volume 0.05 mL) contains 3.0 × 10-6 mole of H+. If the rate constant of disappearance of H+ is 1.0 × 107 mol litre-1 sec-1. How long would it take for H+ in drop to disappear?
Solution. The rate constant is 1.0 × 107 mol litre-1 sec-1, which has the unit of rate, so it is a zero order reaction.
For zero order: t = x/K = (concentration used)/(rate constant) ...(1).
0.05 mL has 3 × 10-6 mole of H+, so 1000 mL has 3×10-6 × 103/0.05 = 0.06 mol/litre of H+.
By (1): t = 0.06/(1 × 107) = 6 × 10-9 second.
Teacher's Note: The unit mol L-1 s-1 for K signals zero order, so time = concentration / K.
Exam Note: Zero order: time equals concentration divided by K.
Question 89. The decomposition of Cl2O7 at 400 K in the gas phase to Cl2 and O2 is of I order. After 55 sec at 400 K, the pressure of Cl2O7 falls from 0.062 to 0.044 atm. Calculate: (a) The rate constant. (b) Pressure of Cl2O7 after 100 sec.
Solution. Cl2O7 → Cl2 + (7/2)O2: moles at t = 0: a; at t = 55 s: (a − x). Since the pressure of Cl2O7 is given, a ∝ 0.062 and (a − x) ∝ 0.044.
(a) K = (2.303/55) log(0.062/0.044) = 6.23 × 10-3 s-1.
(b) At t = 100 s let (a − x) ∝ P: 6.23×10-3 = (2.303/100) log(0.062/P), so P = 0.033 atm.
Teacher's Note: Pressure of the decomposing gas is proportional to its concentration, so use it directly in the first order equation.
Exam Note: Use partial pressure of Cl2O7 only.
Question 90. While studying the decomposition of N2O5(g) it is observed that a plot of logarithm of its partial pressure versus time is linear. What kinetic parameter can be obtained from this?
Solution. For a first order reaction Kt = 2.303 log10[a/(a − x)], or Kt = 2.303 log a − 2.303 log(a − x) ...(1).
In terms of pressure a ∝ P0 and (a − x) ∝ P: Kt = 2.303 log P0 − 2.303 log P, or log10P = −(K/2.303)t + log10P0.
Thus the log P versus time graph is linear with intercept log P0 and slope −K/2.303. Since a linear plot is observed, the decomposition is of first order, and the kinetic parameter obtained is the rate constant K = −2.303 × slope (and the initial pressure P0 from the intercept).
Teacher's Note: A straight line of log P versus t is the test for first order; slope is −K/2.303.
Exam Note: Slope equals −K/2.303; intercept is log P0.
Question 91. The following data represent for the decomposition of NH4NO2 in aqueous solution.
Time in minute: 10, 15, 20, 25, ∞
Volume of N2 (in mL): 6.25, 9.0, 11.40, 13.65, 33.05
(a) Show that reaction is of I order. (b) Calculate velocity constant.
Solution. NH4NO2(s) → N2(g) + 2H2O(l): moles at t = 0: a; at t = t: (a − x) and x of N2. The volume of N2 formed at any time is proportional to the amount of NH4NO2 decomposed.
At t = ∞: VN2 = 33.05 mL, so a ∝ 33.05. At 10, 15, 20, 25 min: x ∝ 6.25, 9.0, 11.40, 13.65.
K = (2.303/t) log[a/(a − x)]. At t = 10: K = (2.303/10) log[33.05/(33.05 − 6.25)] = 2.1 × 10-2 min-1 (book prints 2.0 × 10-2). Similarly at 15, 20, 25 min: K = 2.12, 2.12 and 2.13 × 10-2 min-1.
The values of K come out almost constant, showing that the reaction is of I order. For K take the average of all values: K ≈ 2.1 × 10-2 min-1.
Teacher's Note: Final gas volume represents the total amount; volume at time t represents amount reacted.
Exam Note: V∞ stands for a; Vt stands for x.
Question 92. Derive O.R. for the decomposition of H2O2 from the following data.
Time in minute: 0, 10, 20, 30
Volume of KMnO4 needed for H2O2: 25, 16, 10.5, 7.09
Solution. The volume of KMnO4 used at any time is proportional to the concentration of H2O2 at that time. At t = 0, V = 25, so a ∝ 25; at t = 10, 20, 30: (a − x) ∝ 16, 10.5, 7.09.
K = (2.303/t) log[a/(a − x)]:
K1 = (2.303/10) log(25/16) = 4.46 × 10-2 min-1
K2 = (2.303/20) log(25/10.5) = 4.34 × 10-2 min-1
K3 = (2.303/30) log(25/7.09) = 4.20 × 10-2 min-1
The values of K are almost constant, confirming I order reaction. For the velocity constant take the average: K = (4.46 + 4.34 + 4.20)/3 × 10-2 = 4.33 × 10-2 min-1.
Teacher's Note: Titre of KMnO4 is proportional to remaining H2O2, so Vt plays the role of (a − x).
Exam Note: Titre at time t represents the remaining reactant.
Question 93. Derive the O.R. for the decomposition of H2O2 from the following data.
Time in minute: 10, 15, 20, 25, ∞
Volume of O2 given by H2O2: 6.30, 8.95, 11.40, 13.5, 35.75
Solution. Volume of O2 at any time ∝ mole of H2O2 decomposed, so a ∝ 35.75.
At t = 10, x ∝ 6.30: K = (2.303/10) log[35.75/(35.75 − 6.30)] = 1.94 × 10-2.
At t = 15, x ∝ 8.95: K = (2.303/15) log[35.75/(35.75 − 8.95)] = 1.92 × 10-2.
At t = 20, x ∝ 11.40: K = (2.303/20) log[35.75/(35.75 − 11.40)] = 1.92 × 10-2.
At t = 25, x ∝ 13.50: K = (2.303/25) log[35.75/(35.75 − 13.50)] = 1.90 × 10-2.
K values are constant, so the reaction obeys first order kinetics, K = 1.92 × 10-2 min-1.
Teacher's Note: Oxygen evolved is proportional to H2O2 decomposed; the final volume stands for the initial amount.
Exam Note: V∞ gives a; Vt gives x.
Question 94. The kinetics of hydrolysis of methyl acetate in excess dilute HCl at 25°C were followed by withdrawing 2 mL of the reaction mixture at intervals of (t), adding 50 mL water and titrating with baryta water. Determine the velocity constant of hydrolysis.
t (in minute): 0, 75, 119, 259, ∞
Titre value (in mL): 19.24, 24.20, 26.60, 32.23, 42.03
Solution. Volume of alkali used ∝ mole of acid at that time. At t = 0: V0 ∝ mole of HCl. At t = t: Vt ∝ mole of HCl + mole of CH3COOH formed at t. At t = ∞: V∞ ∝ mole of HCl + total mole of CH3COOH formed.
So a ∝ V∞ − V0 (total ester) and (a − x) ∝ V∞ − Vt (ester left at t).
At t = 75: K1 = (2.303/75) log[(42.03 − 19.24)/(42.03 − 24.20)] = 3.27 × 10-3 min-1.
At t = 119: K2 = (2.303/119) log[(42.03 − 19.24)/(42.03 − 26.60)] = 3.28 × 10-3 min-1.
At t = 259: K3 = (2.303/259) log[(42.03 − 19.24)/(42.03 − 32.23)] = 3.26 × 10-3 min-1.
The values of K are constant, so the reaction obeys I order kinetics; K = (K1 + K2 + K3)/3 = 3.27 × 10-3 min-1.
Teacher's Note: Water is in excess, so hydrolysis is pseudo first order; titre differences stand for ester concentrations.
Exam Note: Excess water gives pseudo first order; use V∞ − Vt.
Question 95. In the inversion of cane sugar in presence of an acid, the following polarimeter readings are obtained.
Time in minute: 0, 30, 90, 230, ∞
Rotation in degree: +46.75, +41.0, +30.75, +12.75, −18.75
Calculate rate constant.
Solution. At t = 0 rotation r0 ∝ mole of sugar + rotation due to external factor; at t = t, rt ∝ left sugar + external factors; at t = ∞, r∞ ∝ external factors.
So a ∝ r0 − r∞ (sugar at t = 0) and (a − x) ∝ rt − r∞ (sugar left at t).
K1 = (2.303/30) log[(46.75 + 18.75)/(41 + 18.75)] = 3.06 × 10-3 min-1
K2 = (2.303/90) log[(46.75 + 18.75)/(30.75 + 18.75)] = 3.11 × 10-3 min-1
K3 = (2.303/230) log[(46.75 + 18.75)/(12.75 + 18.75)] = 3.18 × 10-3 min-1
K values are constant, so the reaction obeys I order kinetics; K = 3.12 × 10-3 min-1.
Teacher's Note: Polarimeter readings measured from the final (∞) reading are proportional to the sugar remaining; the final rotation is negative.
Exam Note: Subtract r∞: add 18.75 because it is negative.
Question 96. The gas phase decomposition of dimethyl ether follows first order kinetics, CH3OCH3(g) → CH4(g) + H2(g) + CO(g). The reaction is carried out in a constant volume container at 500°C and has a half-life of 14.5 minute. Initially only dimethyl ether is present at a pressure of 0.40 atmosphere. What is the total pressure of the system after 12 minute? Assume ideal gas behaviour. (IIT 1993)
Solution. CH3OCH3(g) → CH4(g) + H2(g) + CO(g). Initial P = 0.40 atm; final P at 12 min: (0.40 − P) of ether and P of each product.
For ideal gas behaviour, mole ∝ pressure (constant V and T), so a ∝ 0.40 and (a − x) ∝ (0.40 − P).
K = (2.303/t) log[a/(a − x)]: 0.693/14.5 = (2.303/12) log[0.40/(0.40 − P)], so P = 0.175 atm.
Pressure of ether decomposed = 0.175 atm. Total pressure = (0.40 − P) + P + P + P = 0.40 + 2P = 0.40 + 2 × 0.175 = 0.75 atm.
Teacher's Note: One ether gives three gas molecules, so total pressure rises by 2P; K comes from the half-life.
Exam Note: Each ether molecule makes three gas molecules: net gain two.
Question 97. The reaction A + OH- → Products, obeys rate law expression as, −d[A]/dt = k[A][OH-]. If initial concentrations of [A] and [OH-] are 0.002 M and 0.3 M respectively and if it takes 30 sec for 1% A to react at 25°C, calculate the rate constant for the reaction.
Solution. A + OH- → Products. At t = 0: [A] = 0.002, [OH-] = 0.3. At t = 30 s (1 % of A reacted): [A] = 0.002 − 0.002×1/100 and [OH-] = 0.3 − 0.002×1/100.
Using K = [2.303/(t(a − b))] log[b(a − x)/(a(b − x))]:
K = [2.303/(30 × (0.002 − 0.3))] log{0.3[0.002 − 0.002×1/100]/(0.002[0.3 − 0.002×1/100])}
K = 1.12 × 10-3 L mol-1 s-1 (the pseudo first order shortcut K′ = (2.303/30) log(100/99)/0.3 gives the same value).
Teacher's Note: OH- is in huge excess, so pseudo first order in A; divide by 0.3.
Exam Note: Large excess of OH-: pseudo first order divided by 0.3.
Question 98. For the non-equilibrium process, A + B → Products, the rate is first order with respect to A and second order reaction with respect to B. If 1.0 mole each of A and B are introduced into 1 litre vessel and the initial rate were 1.0 × 10-2 mol/litre-sec, calculate the rate when half of the reactants have been used.
Solution. Rate = K[A][B]2, so 10-2 = K[1][1]2 or K = 10-2 litre2 mol-2 sec-1.
When half of the reactants have been used, [A] = [B] = 0.5 M, so rate = 10-2 × 0.5 × (0.5)2 = 1.25 × 10-3 mol/L-sec (the book gives 1.2 × 10-3), i.e. about 1.2 × 10-3 mol L-1 s-1.
Teacher's Note: Equal moles of A and B in 1 L both fall to 0.5 M, so rate falls by (1/2)3.
Exam Note: Equal amounts react together; rate drops by one eighth.
Question 99. Two reactants A and B separately shows two chemical reactions. Both reactions are made with same initial concentration of each reactant. Reactant A follows first order kinetics whereas reactant B follows second order kinetics. If both have same half-lives, compare their rates (a) at the start of reaction (b) after the lapse of one half-life.
Solution. For A: rate = KA[A]1 ...(1) and (t1/2)A = 0.693/KA ...(2). For B: rate = KB[B]2 ...(3) and (t1/2)B = 1/(a·KB) ...(4), where a is the initial concentration.
(a) Initial rate of A, rA = KA·a; initial rate of B, rB = KB·a2, so rA/rB = (KA/KB)(1/a) ...(5).
From (2) and (4), if (t1/2)A = (t1/2)B: 0.693/KA = 1/(KB·a), so KA/KB = 0.693a ...(6).
From (5) and (6): rA/rB = 0.693a/a = 0.693.
(b) After one half-life the concentrations are a/2: rA′ = KA(a/2) and rB′ = KB(a/2)2, so rA′/rB′ = (KA/KB)(2/a) = 0.693a × 2/a = 1.386.
Teacher's Note: Equal half-lives fix KA/KB = 0.693a; then the rate ratio follows from the concentrations.
Exam Note: Second order half-life is 1/(Ka); first order is 0.693/K.
Question 100. A vessel contains dimethyl ether at a pressure of 0.4 atm. Dimethyl ether decomposes as: CH3OCH3(g) → CH4(g) + CO(g) + H2(g). The rate constant of decomposition is 4.78 × 10-3 min-1. Calculate the ratio of initial rate of diffusion to rate of diffusion after 4.5 hour of initiation of decomposition. Assume composition of gas present and gas diffused remains same.
Solution. CH3OCH3(g) → CH4(g) + CO(g) + H2(g). Pressure at t = 0: 0.4, 0, 0, 0; at t = 4.5 hr: 0.4 − a, a, a, a. Let the ether pressure left = A.
K = (2.303/t) log(0.4/A): 4.78×10-3 = (2.303/(4.5 × 60)) log(0.4/A), so A = 0.110 atm. Then 0.4 − a = 0.110, so a = 0.29.
Total pressure = 0.110 + 3 × 0.29 = 0.98 atm. Molecular weight of mixture = (0.11 × 46 + 0.29 × 16 + 0.29 × 28 + 0.29 × 2)/0.98 = 18.78.
Rate of diffusion ∝ P/√M, so r0/rm = (P0/Pm)√(Mm/M0) = (0.4/0.98)√(18.78/46) = 0.261 (P0 = 0.4, Pm = 0.98; the book prints the square root over the whole product, but its value 0.261 corresponds to this form).
Teacher's Note: Rate of diffusion is proportional to pressure over √(molar mass); both change as the ether decomposes.
Exam Note: Diffusion rate ∝ P/√M; convert 4.5 h to minutes.
Question 101. Some PH3(g) is introduced into a flask at 600°C containing an inert gas. PH3 proceeds to decompose into P4(g) and H2(g) and the reaction goes to completion. The total pressure is given below as a function of time. Find the order of the reaction and calculate the rate constant. (Roorkee 2001)
Time (sec.): 0, 60, 120, ∞
P (mm Hg): 262.40, 272.90, 275.51, 276.40
Solution. 4PH3(g) + inert gas → P4(g) + 6H2(g) + inert gas. Let P = initial pressure of PH3 and P′ = pressure of inert gas. At t = t: PH3 = P − A, P4 = A/4, H2 = 6A/4, inert = P′. At t = ∞: P4 = P/4, H2 = 6P/4.
At t = 0: P + P′ = 262.40 ...(2). At t = ∞: P/4 + 6P/4 + P′ = 276.40, i.e. 7P + 4P′ = 276.40 × 4 ...(1).
Solving: P = 18.66 mm, P′ = 243.74 mm.
At t = 60: 272.90 = (P − A) + P′ + A/4 + 6A/4 = 18.66 − A + 243.74 + 7A/4, so A = 14.0 mm. K = (2.303/60) log[18.66/(18.66 − 14)] = 2.31 × 10-2 s-1.
At t = 120: 275.51 = 18.66 − A′ + 243.74 + 7A′/4, so A′ = 17.48 mm. K = (2.303/120) log[18.66/(18.66 − 17.48)] = 2.30 × 10-2 s-1.
K is constant, so the reaction is of first order, with K ≈ 2.3 × 10-2 s-1.
Teacher's Note: Initial and final pressures give PH3 and inert pressures; the pressure rise at time t gives PH3 reacted.
Exam Note: Inert gas adds a constant pressure; solve two simultaneous equations.
Question 102. Decomposition of H2O2 is a first order reaction. A solution of H2O2 labelled as 20 volume was left open. Due to this some H2O2 decomposed. To determine the new volume strength after 6 hr, 10 mL of this solution was diluted to 100 mL. 10 mL of this diluted solution was titrated against 25 mL of 0.25 M KMnO4 acidified solution. Calculate the rate constant for the decomposition of H2O2.
Solution. After 6 hour: meq of H2O2 in 10 mL diluted solution = 25 × 0.025 × 5 = 3.125; meq in 10 mL concentrated solution = 3.125 × 10 = 31.25.
Meq of H2O2 in 10 mL of 20 volume H2O2 present initially = (68 × 20 × 10)/(22400 × 17) × 1000 = 35.71 (since 22400 mL O2 comes from 68 g H2O2, 20 mL O2 comes from 68 × 20/22400 g H2O2 in 1 mL).
K = (2.303/6) log(35.71/31.25) = 0.022 hr-1.
Note: the book's working uses 0.025 M KMnO4 (25 × 0.025 × 5 = 3.125), while the question as printed says 0.25 M. With 0.25 M the H2O2 left (312.5 meq) would exceed the initial 35.71 meq, which is impossible, so the intended concentration is 0.025 M.
Teacher's Note: Volume strength gives initial equivalents (35.71 meq in 10 mL); KMnO4 titration gives the equivalents left after 6 h.
Exam Note: n-factor of KMnO4 is 5; dilution factor 10.
Question 103. A certain reaction Bn+ is getting converted to B(n+4)+ in solution. The rate constant of this reaction is measured by titrating a volume of the solution with a reducing agent which reacts only with Bn+ and B(n+4)+. In the process it converts Bn+ to B(n+2)+ and B(n+4)+ to B(n-1)+. At t = 0, the volume of reagent consumed is 25 mL and at t = 10 minute, the volume used is 32 mL. Calculate the rate constant for the conversion of Bn+ of B(n+4)+ assuming it to be a first order reaction.
Solution. Bn+ → B(n+4)+. Milli-equivalents of reagent per mole: Bn+ converts to B(n+2)+ (2 equivalents) and B(n+4)+ converts to B(n−1)+ (5 equivalents). Millimole at t = 0: a of Bn+; at t = t: (a − x) of Bn+ and x of B(n+4)+.
Let the normality of the reagent be N. At t = 0: a × 2 = N × 25, so a = 25N/2.
At t = 10: (a − x) × 2 + x × 5 = N × 32, i.e. 2a + 3x = 32N, so 3x = 7N and x = 7N/3.
K = (2.303/10) log[(25/2)N/((25/2 − 7/3)N)] = (2.303/10) log[(25 × 6)/(2 × 61)] = 2.07 × 10-2 min-1.
Teacher's Note: Each ion consumes a different number of equivalents of reagent, so titre = 2(a − x) + 5x.
Exam Note: Equivalents per mole differ: 2 for Bn+, 5 for B(n+4)+.
Question 104. The reaction CH3COF + H2O → CH3COOH + HF has been studied under the following initial conditions: Case I: [H2O]0 = 1.0 M, [CH3COF]0 = 0.01 M. Case II: [H2O]0 = 0.02 M, [CH3COF]0 = 0.80 M. The variation of concentration with time were noted as:
Case I: t/min 0, 10, 20, 40; [CH3COF] 0.01000, 0.00857, 0.00735, 0.00540.
Case II: t/min 0, 10, 20, 40; [H2O] 0.0200, 0.0176, 0.0156, 0.0122.
Determine the order of reaction and rate constant of reaction.
Solution. Let rate = K[CH3COF]a[H2O]b. Case I has [H2O] ≫ [CH3COF], and Case II has [H2O] ≪ [CH3COF]. By Ostwald's isolation method, water is in excess in Case I and CH3COF is in excess in Case II.
Case I: using I order for CH3COF (hit and trial), K1 = (2.303/10) log(0.01/0.00857) = 0.0154; K2 = (2.303/20) log(0.01/0.00735) = 0.0154 (and 0.0154 at 40 min). So Kav = 0.0154, i.e. the order with respect to CH3COF is one, a = 1.
Case II: using I order for H2O: K1′ = (2.303/10) log(0.02/0.0176) = 0.0128; K2′ = (2.303/20) log(0.02/0.0156) = 0.0124; K3′ = (2.303/40) log(0.02/0.0122) = 0.0124. Kav′ = 0.0125 min-1, so the order with respect to H2O is one, b = 1.
Overall order = 2. Rate = KT[CH3COF]1[H2O]1. Also in Case I rate = K1[CH3COF], so KT = K1/[H2O] = 0.0154/1.0 = 1.54 × 10-2 litre mol-1 min-1 (the book writes the unit as min-1; for a second order constant it is L mol-1 min-1). Check with Case II: 0.0125/0.80 = 1.56 × 10-2.
Teacher's Note: Make one reactant huge so it stays constant; each case shows first order in the other, so overall order two.
Exam Note: Isolation method: excess reagent makes pseudo first order.
Download P Bahadur Solutions for JEE Math PDF
Download P Bahadur Solutions for JEE
Explore reliable mathematical solutions for P Bahadur Solutions Numerical Chemistry Chapter 11 Chemical Kinetics Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.
Step-by-Step Mathematical Explanations
Each problem includes a step-by-step breakdown to clarify complex mathematical formulas and theorems. Utilizing these verified answers ensures students learn the proper problem-solving techniques expected in standard academic assessments.
Explore More Study Resources for JEE Math
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the P Bahadur book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.