OP Tandon Solutions for JEE Chemistry: Chapter 06 The Colloidal State
Explore reliable textbook solutions for Chapter 06 The Colloidal State tailored for JEE learners using OP Tandon methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.
Practice JEE Chemistry Solutions: Chapter 06 The Colloidal State
View or download the dedicated Chapter 06 The Colloidal State solution resource below. Engaging with these textbook answers under focused study conditions ensures continuous academic progress and mastery of the 2026 curriculum for Chemistry.
The Colloidal State - Questions, Objective Questions, Brain Storming Problems and Self Assessment
Questions
Question 1. Match the following: [A] (i) Gold number (ii) Lyophobic (iii) Butter (iv) Hardy-Schulze rule (v) Micelles (vi) Purple of cassius (vii) Cheese (viii) Dialysis with (a) Coagulation (b) An emulsion (c) Gold sol (d) Gel (e) Purification of colloidal solution (f) Protective colloids (g) Solvent hating (h) Associated colloids. [B] (i) Brownian movement (ii) Water loving colloids (iii) Liquid dispersed in gas (iv) Tyndall effect (v) Hydrophobic (vi) Coagulation (vii) Electrophoresis (viii) Soap with (a) Aerosol (b) Ultramicroscope (c) Irreversible (d) Sewage disposal (e) Smoke precipitator (f) Hydrophilic (g) Emulsifying agent (h) Robert Brown. [C] Property, Statement, Application/discoverer: (i) Tyndall effect, (ii) Coagulation, (iii) Brownian movement, (iv) Adsorption, (v) Electrophoresis, (vi) Stability with statements (a) Due to unequal bombardment by solvent molecules (b) Surface area is large (c) Movement of colloidal particles under the influence of electric field (d) Due to neutralisation of charge (e) Due to scattering of light (f) Addition of protective colloid and applications (1) Sewage disposal (2) Smoke precipitator (3) Ultramicroscope (4) Ice cream (5) Colloidal medicines (6) Robert Brown.
Solution. [A] (i-f); (ii-g); (iii-b); (iv-a); (v-h); (vi-c); (vii-d); (viii-e). [B] (i-h); (ii-f); (iii-a); (iv-b); (v-c); (vi-d); (vii-e); (viii-g). [C] (i-e-3); (ii-d-1); (iii-a-6); (iv-b-5); (v-c-2); (vi-f-4).
Teacher's Note: Brownian motion links to unequal molecular bombardment and Robert Brown; gold number links to protective colloids.
Exam Note: Match each term by definition, then discoverer or use.
Question 2. Matrix Matching Problems (For IIT Aspirants). [A] Match the colloids in Column-I with the classifications in Column-II: (a) Rain cloud (b) Smoke (c) Butter (d) Soap sud with (p) Gel (q) Foam (r) Aerosol (s) Gas as dispersion medium. [B] Match the terms of List-I with those of List-II: (a) Coagulation (b) Peptization (c) Tyndall effect (d) Dialysis with (p) Scattering of light (q) Purification of colloidal solution (r) Addition of electrolyte (s) Precipitation of colloidal solution. [C] Match Column-I (Colloidal solution) with Column-II (Dispersed phase) and Column-III (Dispersion medium): (a) Colloidion (b) Fog (c) Butter (d) Milk with (p) Water (q) Cellulose (r) Fat (s) Water; and (u) Ethanol (v) Oil (w) Air (x) Water. [D] Match the terms in Column-I with their explanations in Column-II: (a) Cottrell precipitation (b) Electrophoresis (c) Hemidialysis (d) Coagulation with (p) Purification of blood (q) Precipitation of colloidal particles by addition of electrolytes (r) Removal of pollutants gases from industrial waste (s) Movement of charged colloidal particles towards oppositely charged electrode. [E] Match the terms in Column-I with those of Column-II: (a) Emulsifier (b) Colloidal electrolyte (c) Oil dag (d) Xerogel with (p) Colloidal sol. of graphite (q) Detergent (r) Cellophane (s) Dextrin. [F] Match the Column-I with Column-II: (a) Milk (b) Dust (c) Cheese (d) Froth with (p) Aerosol (q) Emulsion (r) Gel (s) Foam.
Solution. [A] (a-r, s) (b-r, s) (c-p) (d-q). [B] (a-r, s) (b-r) (c-p) (d-q). [C] (a-q-u) (b-p-w) (c-p-v) (d-r-x). [D] (a-r, s) (b-s) (c-p) (d-q). [E] (a-q, s) (b-q) (c-p) (d-r). [F] (a-q) (b-p) (c-r) (d-s).
Teacher's Note: Classify each colloid by dispersed phase and medium: smoke and cloud are aerosols, butter a gel here.
Exam Note: Write dispersed phase first, then medium, before matching.
Question 3. The coagulation of 100 mL of a colloidal solution of gold is completely prevented by adding 0.25 g of starch to it before adding 1 mL of 10% NaCl solution. Find out the gold number of starch.
Solution. Hint: 10 mL of 10% NaCl solution is added to 100 mL of solution of gold. Thus, 1 mL of 10% NaCl solution has been added to 10 mL solution of gold. Since 100 mL gold solution required = 0.25 g starch = 0.25 × 103 mg starch, 10 mL gold solution required = (0.25 × 103/100) × 10 = 25 mg starch. Thus, by definition, the gold number of starch is 25.
Teacher's Note: Gold number is mg of protective colloid per 10 mL gold sol with 1 mL of 10% NaCl; scale accordingly.
Exam Note: Scale to 10 mL gold sol and convert g to mg.
Question 4. For the coagulation of 100 mL of arsenious sulphide solution, 5 mL of 1 M NaCl is required. What is the coagulating power of NaCl?
Solution. Hint: Total volume after addition of 5 mL of 1 M NaCl solution = 105 mL. Thus, 105 × molarity of NaCl in colloidal solution = 5 × 1, so molarity of NaCl in colloidal solution = 5/105. Concentration in millimole = (5/105) × 1000 = 47.6. Answer: 47.6 millimole per litre.
Teacher's Note: Coagulating value is millimoles per litre of electrolyte in the final mixture, so include total volume.
Exam Note: Use final volume 105 mL, not 100 mL.
Objective Questions: Set-1 (single correct answer)
Set-1 Question 1. The difference between crystalloid and colloid is of: (a) particle size (b) chemical composition (c) ionic character (d) solubility
Solution. Answer (from key): (a) particle size. Crystalloids and colloids differ in particle size, not in chemical identity, since any substance can be made colloidal.
Teacher's Note: Crystalloids and colloids differ in particle size, not in chemical identity, since any substance can be made colloidal.
Exam Note: Particle size decides the state.
Set-1 Question 2. Substances whose solutions can readily diffuse through animal membranes are called: (a) colloids (b) crystalloids (c) electrolytes (d) non-electrolytes
Solution. Answer (from key): (b) crystalloids. Crystalloids (true solution particles) pass through animal membranes; colloids do not.
Teacher's Note: Crystalloids (true solution particles) pass through animal membranes; colloids do not.
Exam Note: Graham's crystalloid-colloid distinction by diffusion.
Set-1 Question 3. Suspensions are: (a) visible to naked eye (b) invisible through microscope (c) not visible by any means (d) invisible under electron microscope
Solution. Answer (from key): (a) visible to naked eye. Suspension particles exceed 10-3 cm, so they are seen directly.
Teacher's Note: Suspension particles exceed 10-3 cm, so they are seen directly.
Exam Note: Compare sizes: suspension, colloid, true solution.
Set-1 Question 4. The size of the colloidal particles is in between: (CPMT 1990) (a) 10-7 - 10-9 cm (b) 10-9 - 10-11 cm (c) 10-5 - 10-7 cm (d) 10-2 - 10-3 cm
Solution. Answer (from key): (c) 10-5 - 10-7 cm. Colloidal range is 1 mμ to 100 mμ, i.e. 10-7 to 10-5 cm.
Teacher's Note: Colloidal range is 1 mμ to 100 mμ, i.e. 10-7 to 10-5 cm.
Exam Note: Remember 10-7 to 10-5 cm range.
Set-1 Question 5. The size of a colloidal particle is: [PMT (MP) 1990] (a) > 0.1 μ (b) 1 mμ to 0.1 μ (c) < 0.1 mμ (d) more than 3000 mμ
Solution. Answer (from key): (b) 1 mμ to 0.1 μ. 1 mμ = 10-7 cm and 0.1 μ = 10-5 cm, the colloidal range.
Teacher's Note: 1 mμ = 10-7 cm and 0.1 μ = 10-5 cm, the colloidal range.
Exam Note: Convert mμ and μ to cm.
Set-1 Question 6. If liquid is dispersed in solid medium, then this is called: (DCE 2009) (a) sol (b) emulsion (c) liquid aerosol (d) gel
Solution. Answer (from key): (d) gel. Liquid in solid is a gel (e.g. cheese, jelly).
Teacher's Note: Liquid in solid is a gel (e.g. cheese, jelly).
Exam Note: Name the type from dispersed phase and medium.
Set-1 Question 7. Which of the following forms a colloidal solution in water? (CPMT 1990) (a) NaCl (b) Glucose (c) Ba(NO3)2 (d) Starch
Solution. Answer (from key): (d) Starch. Starch is a macromolecule and gives a colloidal solution in water; the others are crystalloids.
Teacher's Note: Starch is a macromolecule and gives a colloidal solution in water; the others are crystalloids.
Exam Note: Macromolecules like starch, gelatin form colloids.
Set-1 Question 8. The number of phases present in colloidal solution is: (a) 2 (b) 4 (c) 3 (d) 1
Solution. Answer (from key): (a) 2. A colloidal solution has two phases, the dispersed phase and the dispersion medium.
Teacher's Note: A colloidal solution has two phases, the dispersed phase and the dispersion medium.
Exam Note: Colloids are heterogeneous: two phases.
Set-1 Question 9. The colloidal system of a solid dispersed in liquid medium is called: [CET (J&K) 2007] (a) aerosol (b) sol (c) gel (d) foam
Solution. Answer (from key): (b) sol. Solid in liquid is a sol.
Teacher's Note: Solid in liquid is a sol.
Exam Note: Dispersed solid plus liquid medium means sol.
Set-1 Question 10. When dispersed phase is liquid and dispersion medium is gas, the colloidal system is called: (a) smoke (b) emulsion (c) cloud (d) gel
Solution. Answer (from key): (c) cloud. Liquid in gas is a liquid aerosol such as cloud or fog.
Teacher's Note: Liquid in gas is a liquid aerosol such as cloud or fog.
Exam Note: Smoke is solid in gas; cloud is liquid in gas.
Set-1 Question 11. Water loving colloids are called as: (a) hydrophilic (b) hydrophobic (c) lyophobic (d) irreversible
Solution. Answer (from key): (a) hydrophilic. Water-loving colloids are hydrophilic.
Teacher's Note: Water-loving colloids are hydrophilic.
Exam Note: Hydro means water; philic means loving.
Set-1 Question 12. An emulsion is a colloidal solution consisting of: (a) two solids (b) two liquids (c) two gases (d) one solid and one liquid
Solution. Answer (from key): (b) two liquids. An emulsion is a liquid dispersed in another liquid.
Teacher's Note: An emulsion is a liquid dispersed in another liquid.
Exam Note: Emulsion means liquid in liquid.
Set-1 Question 13. The colloidal solution of gelatin is known as: (a) solvent loving (b) reversible (c) hydrophilic (d) all of these
Solution. Answer (from key): (d) all of these. Gelatin sol is lyophilic (solvent loving), reversible and hydrophilic in water.
Teacher's Note: Gelatin sol is lyophilic (solvent loving), reversible and hydrophilic in water.
Exam Note: Lyophilic sols are reversible.
Set-1 Question 14. Sol is a type of colloid in which: [PET (Raj.) 2008] (a) solid is dispersed in liquid (b) liquid is dispersed in solid (c) gas is dispersed in liquid (d) solid is dispersed in solid
Solution. Answer (from key): (a) solid is dispersed in liquid. A sol has a solid dispersed in a liquid.
Teacher's Note: A sol has a solid dispersed in a liquid.
Exam Note: Distinguish sol, gel, foam and solid sol.
Set-1 Question 15. Butter is a colloid formed when: (a) fat is dispersed in fat (b) fat is dispersed in water (c) water is dispersed in fat (d) suspension of casein in water
Solution. Answer (from key): (c) water is dispersed in fat. Butter is a water-in-oil emulsion: water dispersed in fat.
Teacher's Note: Butter is a water-in-oil emulsion: water dispersed in fat.
Exam Note: Butter is W/O; milk is O/W.
Set-1 Question 16. Milk is: [PMT (MP) 2007; C.G. PET 2008] (a) fat dispersed in water (b) water dispersed in fat (c) water dispersed in oil (d) fat dispersed in fat
Solution. Answer (from key): (a) fat dispersed in water. Milk is an oil-in-water emulsion with fat dispersed in water.
Teacher's Note: Milk is an oil-in-water emulsion with fat dispersed in water.
Exam Note: Milk is O/W emulsion.
Set-1 Question 17. Smoke is an example of: (CPMT 1991) (a) solid dispersed in solid (b) solid dispersed in gas (c) solid dispersed in liquid (d) gas dispersed in solid
Solution. Answer (from key): (b) solid dispersed in gas. Smoke consists of solid particles dispersed in air, an aerosol.
Teacher's Note: Smoke consists of solid particles dispersed in air, an aerosol.
Exam Note: Smoke is solid in gas.
Set-1 Question 18. Fog is a colloidal solution of: [PMT (MP) 1991; CET (J&K) 2005; DUMET 2009] (a) gaseous particles dispersed in gas (b) gaseous particles dispersed in liquids (c) liquid dispersed in gas (d) solid dispersed in liquid
Solution. Answer (from key): (c) liquid dispersed in gas. Fog is liquid droplets dispersed in air.
Teacher's Note: Fog is liquid droplets dispersed in air.
Exam Note: Fog is liquid in gas.
Set-1 Question 19. Lyophobic colloids are: (a) reversible (b) irreversible (c) water loving (d) solvent loving
Solution. Answer (from key): (b) irreversible. Lyophobic colloids cannot be reconstituted on evaporation, so they are irreversible.
Teacher's Note: Lyophobic colloids cannot be reconstituted on evaporation, so they are irreversible.
Exam Note: Lyophobic means solvent hating, irreversible.
Set-1 Question 20. Sulphur sol contains: (a) discrete sulphur atoms (b) discrete sulphur molecules (c) water dispersed in solid sulphur (d) large aggregates of sulphur molecules
Solution. Answer (from key): (d) large aggregates of sulphur molecules. Sulphur sol is a multimolecular colloid made of aggregates of S8 molecules.
Teacher's Note: Sulphur sol is a multimolecular colloid made of aggregates of S8 molecules.
Exam Note: Multimolecular colloids are aggregates of small molecules.
Set-1 Question 21. Which of the following is not a colloidal system? (a) Bread (b) Muddy water (c) Concrete (d) Sugar in water
Solution. Answer (from key): (d) Sugar in water. Sugar in water is a true solution.
Teacher's Note: Sugar in water is a true solution.
Exam Note: True solutions are not colloids.
Set-1 Question 22. Peptization denotes: (MHT-CET 2007) (a) digestion of food (b) hydrolysis of proteins (c) breaking and dispersion into colloidal state (d) precipitation of solid from colloidal dimension
Solution. Answer (from key): (c) breaking and dispersion into colloidal state. Peptization converts a freshly formed precipitate into a colloidal sol with a small amount of electrolyte.
Teacher's Note: Peptization converts a freshly formed precipitate into a colloidal sol with a small amount of electrolyte.
Exam Note: Peptization is the reverse of coagulation.
Set-1 Question 23. Colloids are purified by: (CPMT 1990) (a) Brownian motion (b) precipitation (c) dialysis (d) filtration
Solution. Answer (from key): (c) dialysis. Dialysis removes dissolved crystalloid impurities through a membrane.
Teacher's Note: Dialysis removes dissolved crystalloid impurities through a membrane.
Exam Note: Dialysis uses a semipermeable membrane.
Set-1 Question 24. The separation of colloidal particles from those of molecular dimension is known as: (a) dialysis (b) electrophoresis (c) peptization (d) pyrolysis
Solution. Answer (from key): (a) dialysis. Dialysis separates colloids from molecular-size solutes.
Teacher's Note: Dialysis separates colloids from molecular-size solutes.
Exam Note: Dialysis separates colloid from crystalloid.
Set-1 Question 25. Bredig's arc method is used for the preparation of colloidal solution of: (a) metals like silver, gold, etc. (b) organic compounds (c) two liquids (d) inorganic compounds
Solution. Answer (from key): (a) metals like silver, gold, etc.. Bredig's arc method disperses metals electrically under the liquid.
Teacher's Note: Bredig's arc method disperses metals electrically under the liquid.
Exam Note: Bredig arc gives metal sols.
Set-1 Question 26. Which of the following reactions is not used for the preparation of a colloidal solution? (a) 2AuCl3 + 3SnCl2 → 3SnCl4 + 2Au (b) FeCl3 + 3H2O → Fe(OH)3 + 3HCl (c) 2Mg + CO2 → 2MgO + C (d) 2H2S + SO2 → 2H2O + 3S
Solution. Answer (from key): (c) 2Mg + CO2 → 2MgO + C. Options a, b and d are reduction, hydrolysis and double decomposition methods giving sols; option c gives no sol.
Teacher's Note: Options a, b and d are reduction, hydrolysis and double decomposition methods giving sols; option c gives no sol.
Exam Note: Know sol-forming methods: reduction, hydrolysis, oxidation.
Set-1 Question 27. When freshly precipitated Fe(OH)3 is boiled with water in the presence of few drops of dil. HCl, a hydrated ferric oxide sol is obtained. This method is termed: (a) dialysis (b) peptization (c) ultrafiltration (d) electro-dispersion
Solution. Answer (from key): (b) peptization. A precipitate dispersed by a small amount of electrolyte (here HCl) is peptization.
Teacher's Note: A precipitate dispersed by a small amount of electrolyte (here HCl) is peptization.
Exam Note: Peptizing agent is a small amount of electrolyte.
Set-1 Question 28. Which of the following substances gives a positively charged sol? [PMT (MP) 1990] (a) Gold (b) Arsenious sulphide (c) Starch (d) Ferric hydroxide
Solution. Answer (from key): (d) Ferric hydroxide. Fe(OH)3 sol is positive; gold and As2S3 sols are negative.
Teacher's Note: Fe(OH)3 sol is positive; gold and As2S3 sols are negative.
Exam Note: Hydrated metal oxides are positive sols.
Set-1 Question 29. The kinetic activity of colloidal particles in dispersion medium is known as: (a) electro-osmosis (b) cataphoresis (c) Brownian movement (d) electrophoresis
Solution. Answer (from key): (c) Brownian movement. Random zig-zag motion of colloidal particles is Brownian movement.
Teacher's Note: Random zig-zag motion of colloidal particles is Brownian movement.
Exam Note: Brownian motion is due to medium molecules.
Set-1 Question 30. Brownian movement was discovered by: (a) Robert Brown (b) Zsigmondy (c) Hardy-Schulze (d) Graham
Solution. Answer (from key): (a) Robert Brown. Robert Brown observed the movement in pollen grains.
Teacher's Note: Robert Brown observed the movement in pollen grains.
Exam Note: Match scientist with phenomenon.
Set-1 Question 31. The Brownian movement is due to: (a) temperature fluctuations within the liquid phase (b) attraction and repulsion between charges on colloidal particles (c) impact of molecules of the dispersion medium on colloidal particles (d) convection currents
Solution. Answer (from key): (c) impact of molecules of the dispersion medium on colloidal particles. Unbalanced bombardment by medium molecules makes particles move randomly.
Teacher's Note: Unbalanced bombardment by medium molecules makes particles move randomly.
Exam Note: Impact of medium molecules, not charge, causes it.
Set-1 Question 32. Tyndall phenomenon is shown by: (a) dilute solution (b) colloidal solution (c) suspension (d) true solution
Solution. Answer (from key): (b) colloidal solution. Colloidal particles scatter light, showing the Tyndall effect.
Teacher's Note: Colloidal particles scatter light, showing the Tyndall effect.
Exam Note: Scattering needs particles of colloidal size.
Set-1 Question 33. The sky looks blue due to: (a) dispersion effect (b) reflection (c) transmission (d) scattering
Solution. Answer (from key): (d) scattering. Dust and water particles in air scatter blue light.
Teacher's Note: Dust and water particles in air scatter blue light.
Exam Note: Blue sky is Tyndall scattering.
Set-1 Question 34. Tyndall effect in colloidal solution is due to: (MHT-CET 2007) (a) absorption of light (b) scattering of light (c) reflection of light (d) presence of electrically charged particles
Solution. Answer (from key): (b) scattering of light. Colloidal particles scatter light, making the beam path visible.
Teacher's Note: Colloidal particles scatter light, making the beam path visible.
Exam Note: Scattering, not absorption.
Set-1 Question 35. The migration of colloidal particles under the influence of an electric field is known as: (a) electro-osmosis (b) Brownian movement (c) cataphoresis (d) dialysis
Solution. Answer (from key): (c) cataphoresis. Movement of colloidal particles in an electric field is electrophoresis (cataphoresis).
Teacher's Note: Movement of colloidal particles in an electric field is electrophoresis (cataphoresis).
Exam Note: Particles move, medium rests: electrophoresis.
Set-1 Question 36. The stability of lyophilic colloids is due to: [PMT (MP) 1990] (a) charge on their particles (b) large size of their particles (c) smaller size of their particles (d) a layer of medium of dispersion on their particles
Solution. Answer (from key): (d) a layer of medium of dispersion on their particles. Solvation sheath around particles keeps lyophilic sols stable.
Teacher's Note: Solvation sheath around particles keeps lyophilic sols stable.
Exam Note: Lyophilic sols are stabilised by solvation.
Set-1 Question 37. 'Greater the valency, the higher is the coagulating power of ion.' This rule was introduced by: (a) Hardy-Schulze (b) Graham (c) Kossel and Lewis (d) Faraday
Solution. Answer (from key): (a) Hardy-Schulze. This is the Hardy-Schulze rule.
Teacher's Note: This is the Hardy-Schulze rule.
Exam Note: Coagulating power rises with ion valency.
Set-1 Question 38. Bleeding is stopped by the application of ferric chloride. This is because: (a) the blood starts flowing in opposite direction (b) the ferric chloride seals the blood vessel (c) the blood reacts and forms a solid which seals the blood vessel (d) the blood is coagulated and thus, the blood vessel is sealed
Solution. Answer (from key): (d) the blood is coagulated and thus, the blood vessel is sealed. Fe3+ coagulates the negatively charged blood sol, sealing the vessel.
Teacher's Note: Fe3+ coagulates the negatively charged blood sol, sealing the vessel.
Exam Note: Fe3+ coagulates negative blood sol.
Set-1 Question 39. Which property of colloidal solution is used to determine the nature of charge on the particles? (a) Sedimentation (b) Electrophoresis (c) Dialysis (d) Ultrafiltration
Solution. Answer (from key): (b) Electrophoresis. The direction of particle movement in electrophoresis shows the sign of charge.
Teacher's Note: The direction of particle movement in electrophoresis shows the sign of charge.
Exam Note: Direction of migration shows charge sign.
Set-1 Question 40. When excess of electrolyte is added to a colloid it: (CBSE 1990) (a) coagulates (b) gets diluted (c) precipitates (d) does not change
Solution. Answer (from key): (a) coagulates. Excess electrolyte neutralises particle charge, so the sol coagulates.
Teacher's Note: Excess electrolyte neutralises particle charge, so the sol coagulates.
Exam Note: Coagulation follows charge neutralisation.
Set-1 Question 41. The colloidal solutions of gold prepared by different methods have different colours. This is due to: (MLNR 1993) (a) difference in size of colloidal particles (b) different concentration of gold (c) presence of different types of foreign particles (d) the variable valency of gold
Solution. Answer (from key): (a) difference in size of colloidal particles. Colour of a sol depends on particle size.
Teacher's Note: Colour of a sol depends on particle size.
Exam Note: Particle size controls colour.
Set-1 Question 42. The capacity of an ion to coagulate a colloidal solution depends on: (a) its shape (b) the amount of its charge (c) the sign of the charge (d) both, the amount and the sign of the charge
Solution. Answer (from key): (d) both, the amount and the sign of the charge. Coagulating ion must carry charge opposite to the sol, and higher charge coagulates better.
Teacher's Note: Coagulating ion must carry charge opposite to the sol, and higher charge coagulates better.
Exam Note: Sign decides which ion; amount decides power.
Set-1 Question 43. Lyophilic sols are more stable than lyophobic sols because: (AFMC 1998) (a) the colloidal particles have positive charge (b) the colloidal particles have negative charge (c) the colloidal particles are solvated (d) there are strong electrostatic repulsions
Solution. Answer (from key): (c) the colloidal particles are solvated. Solvation of particles stabilises lyophilic sols.
Teacher's Note: Solvation of particles stabilises lyophilic sols.
Exam Note: Solvation gives extra stability.
Set-1 Question 44. Which of the following will have the highest coagulating power for As2S3 colloid? (a) PO43- (b) Al3+ (c) SO42- (d) Na+
Solution. Answer (from key): (b) Al3+. As2S3 is a negative sol, so cations coagulate it; Al3+ has the highest charge.
Teacher's Note: As2S3 is a negative sol, so cations coagulate it; Al3+ has the highest charge.
Exam Note: Negative sol: choose highest-charge cation.
Set-1 Question 45. A negatively charged suspension of clay in water will need for precipitation the minimum amount of: (a) aluminium chloride (b) potassium sulphate (c) sodium hydroxide (d) hydrochloric acid
Solution. Answer (from key): (a) aluminium chloride. Al3+ is the highest-valent cation, so least amount is needed.
Teacher's Note: Al3+ is the highest-valent cation, so least amount is needed.
Exam Note: Highest cation valency needs least amount.
Set-1 Question 46. Which of the following electrolytes is least effective in causing flocculation of ferric hydroxide sol? (MLNR 1991) (a) K3Fe(CN)6 (b) K2CrO4 (c) KBr (d) K2SO4
Solution. Answer (from key): (c) KBr. Fe(OH)3 is positive, so anions coagulate it; Br- has the lowest charge.
Teacher's Note: Fe(OH)3 is positive, so anions coagulate it; Br- has the lowest charge.
Exam Note: Positive sol: lowest-charge anion is least effective.
Set-1 Question 47. Fe3+ ions coagulate blood. This shows blood contains colloidal particles bearing: (a) negative charge (b) positive charge (c) no charge (d) either positive or negative charge
Solution. Answer (from key): (a) negative charge. Positive Fe3+ coagulates the sol, so blood particles are negative.
Teacher's Note: Positive Fe3+ coagulates the sol, so blood particles are negative.
Exam Note: Coagulating ion carries opposite charge.
Set-1 Question 48. Gold number is a measure of: (CPMT 1991) (a) stability of colloidal system (b) coagulating power of a colloid (c) size of colloidal particles (d) efficiency of the protective colloid
Solution. Answer (from key): (d) efficiency of the protective colloid. Gold number measures the protective power of a lyophilic colloid.
Teacher's Note: Gold number measures the protective power of a lyophilic colloid.
Exam Note: Lower gold number means better protection.
Set-1 Question 49. Gold number is a measure of: [PET (MP) 2004] (a) the amount of gold present in the colloidal solution (b) the amount of gold required to break the colloid (c) the amount of gold required to protect the colloid (d) none of the above
Solution. Answer (from key): (d) none of the above. Gold number is mg of protective colloid, not gold, so none of a, b, c is right.
Teacher's Note: Gold number is mg of protective colloid, not gold, so none of a, b, c is right.
Exam Note: Gold number counts protective colloid in mg.
Set-1 Question 50. Which of the following methods is used for destruction of a colloidal solution? (a) Condensation (b) Dialysis (c) Diffusion through animal membrane (d) Addition of an electrolyte
Solution. Answer (from key): (d) Addition of an electrolyte. Adding an electrolyte coagulates and so destroys the sol.
Teacher's Note: Adding an electrolyte coagulates and so destroys the sol.
Exam Note: Electrolyte addition causes coagulation.
Set-1 Question 51. Which of the following is not a property of hydrophilic sols? (a) High concentration of dispersed phase can be easily attained (b) Coagulation is reversible (c) Viscosity and surface tension are nearly as that of water (d) The charge on the particles depends on the pH value of the solution; it may be positive, negative or zero
Solution. Answer (from key): (c) Viscosity and surface tension are nearly as that of water. Hydrophilic sols have higher viscosity and lower surface tension than water.
Teacher's Note: Hydrophilic sols have higher viscosity and lower surface tension than water.
Exam Note: Lyophilic sols are viscous, unlike lyophobic.
Set-1 Question 52. Gelatin is added in manufacture of ice cream in order to: (a) prevent formation of a colloid (b) stabilise the colloid and prevent crystallisation (c) cause the mixture to solidify easily (d) improve flavour
Solution. Answer (from key): (b) stabilise the colloid and prevent crystallisation. Gelatin acts as a protective colloid, preventing ice-crystal growth.
Teacher's Note: Gelatin acts as a protective colloid, preventing ice-crystal growth.
Exam Note: Protective colloid stabilises ice cream.
Set-1 Question 53. Which one of the following will act as best protective colloid? (a) Gelatin (Gold No. 0.005) (b) Starch (Gold No. 25) (c) Gum arabic (Gold No. 0.15) (d) Egg albumin (Gold No. 0.08)
Solution. Answer (from key): (a) Gelatin (Gold No. 0.005). Lowest gold number means best protective power; gelatin has 0.005.
Teacher's Note: Lowest gold number means best protective power; gelatin has 0.005.
Exam Note: Pick the lowest gold number.
Set-1 Question 54. Gold number is a measure of the: (a) protective action by a lyophilic colloid on lyophobic colloid (b) protective action by a lyophobic colloid on lyophilic colloid (c) number of mg of gold in a standard red gold sol (d) none of the above
Solution. Answer (from key): (a) protective action by a lyophilic colloid on lyophobic colloid. Gold number measures protection of a lyophobic sol by a lyophilic colloid.
Teacher's Note: Gold number measures protection of a lyophobic sol by a lyophilic colloid.
Exam Note: Lyophilic protects lyophobic, not vice versa.
Set-1 Question 55. On addition of one mL solution of 10% NaCl to 10 mL gold sol in presence of 0.025 g of starch, the coagulation is just prevented. The gold number of starch is: (a) 25.0 (b) 2.5 (c) 0.25 (d) 0.025
Solution. Answer (from key): (a) 25.0. 0.025 g = 25 mg of starch protects 10 mL gold sol against 1 mL of 10% NaCl, so gold number = 25.
Teacher's Note: 0.025 g is 25 mg starch per 10 mL gold sol, so gold number is 25.
Exam Note: Convert grams to mg first.
Set-1 Question 56. The stability of lyophilic sols is due to: (a) Brownian motion only (b) electric charge only (c) both Brownian motion and electric charge (d) particle size
Solution. Answer (from key): (c) both Brownian motion and electric charge. The key prints (c); the stability of a lyophilic sol is due to charge and Brownian motion (together with solvation).
Teacher's Note: The key prints (c); the stability of a lyophilic sol is due to charge and Brownian motion (together with solvation).
Exam Note: Distinguish stability factors of lyophilic and lyophobic sols.
Set-1 Question 57. Which one of the following colloidal solutions is positive sol? (CPMT 1992) (a) Blood (b) Clay soil (c) Smoke (d) Gelatin in strongly acidic solution
Solution. Answer (from key): (d) Gelatin in strongly acidic solution. Proteins like gelatin take positive charge in acidic medium; blood, clay and smoke are negative.
Teacher's Note: Proteins like gelatin take positive charge in acidic medium; blood, clay and smoke are negative.
Exam Note: Proteins are positive at low pH.
Set-1 Question 58. All colloidal solutions show: (a) very high osmotic pressure (b) high osmotic pressure (c) low osmotic pressure (d) no osmotic pressure
Solution. Answer (from key): (c) low osmotic pressure. Colloidal particles are huge aggregates, so particle count and osmotic pressure are low.
Teacher's Note: Colloidal particles are huge aggregates, so particle count and osmotic pressure are low.
Exam Note: Fewer particles means weaker colligative properties.
Set-1 Question 59. Which of the following is associated colloid? (a) Soap (b) Detergent (c) Both (d) None of these
Solution. Answer (from key): (c) Both. Soaps and detergents form micelles above CMC and are associated colloids.
Teacher's Note: Soaps and detergents form micelles above CMC and are associated colloids.
Exam Note: Associated colloids form micelles.
Set-1 Question 60. Which of the following is an emulsifier? (a) Oil (b) Soap (c) Solvent (d) KCl
Solution. Answer (from key): (b) Soap. Soap, with polar and non-polar ends, stabilises oil-water emulsions.
Teacher's Note: Soap, with polar and non-polar ends, stabilises oil-water emulsions.
Exam Note: Emulsifiers have polar and non-polar parts.
Set-1 Question 61. An emulsifier is a substance which: (a) helps in the dispersion of liquid in liquid (b) stabilises the emulsion (c) coagulates the emulsion (d) purifies the emulsion
Solution. Answer (from key): (b) stabilises the emulsion. An emulsifier forms an interfacial film that stabilises the emulsion.
Teacher's Note: An emulsifier forms an interfacial film that stabilises the emulsion.
Exam Note: Emulsifier stabilises, not creates, emulsions.
Set-1 Question 62. The gold numbers of some colloidal solutions are given below: A 0.01, B 2.5, C 20. The protective powers of these colloidal solutions follow the order: [CET (J&K) 2006; AIEEE 2008] (a) C > B > A (b) A > B > C (c) A = B = C (d) B > A > C
Solution. Answer (from key): (b) A > B > C. Smaller gold number means greater protective power, so A (0.01) > B (2.5) > C (20).
Teacher's Note: Smaller gold number means greater protective power, so A (0.01) > B (2.5) > C (20).
Exam Note: Protective power is inversely related to gold number.
Set-1 Question 63. Dialyser is a name given to: (a) lyophilic colloids (b) lyophobic colloids (c) a membrane which can separate colloids from the solution (d) none of the above
Solution. Answer (from key): (c) a membrane which can separate colloids from the solution. A dialyser is the semipermeable membrane used in dialysis to separate crystalloids from colloids.
Teacher's Note: A dialyser is the semipermeable membrane used in dialysis to separate crystalloids from colloids.
Exam Note: Dialyser is the membrane, not the colloid.
Set-1 Question 64. Flocculation value is expressed in terms of: (a) millimole per litre (b) mol per litre (c) gram per litre (d) mol per millilitre
Solution. Answer (from key): (a) millimole per litre. Flocculation value is the minimum electrolyte concentration in millimoles per litre that coagulates a sol in 2 hours.
Teacher's Note: Flocculation value is the minimum electrolyte concentration in millimoles per litre that coagulates a sol in 2 hours.
Exam Note: State units as millimoles per litre.
Set-1 Question 65. Which of the following has minimum flocculation value? [PET (MP) 1990] (a) Pb2+ (b) Pb4+ (c) Sr2+ (d) Na+
Solution. Answer (from key): (b) Pb4+. Flocculation value falls as valency rises (Hardy-Schulze), so Pb4+ has the minimum value.
Teacher's Note: Flocculation value falls as valency rises (Hardy-Schulze), so Pb4+ has the minimum value.
Exam Note: Highest charge, lowest flocculation value.
Set-1 Question 66. The charge of As2S3 sol is due to the adsorbed: (a) H+ (b) OH- (c) O2- (d) S2-
Solution. Answer (from key): (d) S2-. As2S3 sol adsorbs S2- ions (from H2S) and becomes negative.
Teacher's Note: As2S3 sol adsorbs S2- ions (from H2S) and becomes negative.
Exam Note: Sol adsorbs its own common ion.
Set-1 Question 67. Which of the following has maximum flocculation value? (a) [Fe(CN)6]4- (b) Cl- (c) SO42- (d) PO43-
Solution. Answer (from key): (b) Cl-. Cl- has the lowest charge, so it is the weakest coagulant and has the maximum flocculation value.
Teacher's Note: Cl- has the lowest charge, so it is the weakest coagulant and has the maximum flocculation value.
Exam Note: Lowest valency gives maximum flocculation value.
Set-1 Question 68. Above critical micelle concentration, particles get: [AMU (Medical) 2006] (a) associated (b) dissociated (c) both (a) and (b) (d) none of these
Solution. Answer (from key): (a) associated. Above CMC surfactant molecules aggregate into micelles, i.e. they associate.
Teacher's Note: Above CMC surfactant molecules aggregate into micelles, i.e. they associate.
Exam Note: Micelles form by association above CMC.
Set-1 Question 69. Continuous phase contains dispersed phase throughout. Example is: (VITEEE 2008) (a) water in milk (b) fat in milk (c) water droplets in mist (d) oil in water
Solution. Answer (from key): (a) water in milk. In milk (an oil-in-water emulsion) the continuous phase is water, with fat dispersed throughout it, as the key accepts.
Teacher's Note: In milk (an oil-in-water emulsion) the continuous phase is water, with fat dispersed throughout it, as the key accepts.
Exam Note: Identify medium and dispersed phase separately.
Set-1 Question 70. The movement of dispersion medium in an electric field when the dispersed particles are prevented from moving is called: (a) cataphoresis (b) electrophoresis (c) electro-osmosis (d) Brownian movement
Solution. Answer (from key): (c) electro-osmosis. When the particles are held fixed, the medium moves; this is electro-osmosis.
Teacher's Note: When the particles are held fixed, the medium moves; this is electro-osmosis.
Exam Note: Electro-osmosis: medium moves, particles fixed.
Set-1 Question 71. To coagulate gelatin sol, which of the following is most effective? (a) NaCl (b) Na3PO4 (c) AlCl3 (d) Alcohol
Solution. Answer (from key): (d) Alcohol. Lyophilic gelatin needs dehydration of its solvation sheath (alcohol) plus electrolyte; alcohol is most effective.
Teacher's Note: Lyophilic gelatin needs dehydration of its solvation sheath (alcohol) plus electrolyte; alcohol is most effective.
Exam Note: Lyophilic sols need dehydrating agent first.
Set-1 Question 72. The emulsifying agent in milk is: [EAMCET (Med.) 2010] (a) lactic acid (b) fat (c) lactose (d) casein
Solution. Answer (from key): (d) casein. Casein, a protein, stabilises the fat droplets in milk.
Teacher's Note: Casein, a protein, stabilises the fat droplets in milk.
Exam Note: Proteins act as emulsifiers for O/W emulsions.
Set-1 Question 73. Colloidal solutions of metals like Cu, Ag, Au and Pt are generally prepared by using: (a) peptization (b) Bredig's arc method (c) exchange of solvent (d) oxidation method
Solution. Answer (from key): (b) Bredig's arc method. Metal sols are made by Bredig's arc method, striking an arc between metal electrodes under water.
Teacher's Note: Metal sols are made by Bredig's arc method, striking an arc between metal electrodes under water.
Exam Note: Bredig arc is the standard metal sol method.
Set-1 Question 74. Silver iodide is used for producing artificial rain because AgI: (a) has crystal structure similar to ice (b) is easy to spray at high altitudes (c) is easy to synthesize (d) is soluble in water
Solution. Answer (from key): (a) has crystal structure similar to ice. AgI has a crystal structure close to ice, so it acts as a nucleus for ice and rain formation.
Teacher's Note: AgI has a crystal structure close to ice, so it acts as a nucleus for ice and rain formation.
Exam Note: Seeding works by structural match with ice.
Set-1 Question 75. The minimum concentration of an electrolyte required to cause coagulation of a sol is called: (a) flocculation value (b) gold number (c) protective value (d) coagulation number
Solution. Answer (from key): (a) flocculation value. Minimum electrolyte concentration that coagulates a sol is the flocculation value.
Teacher's Note: Minimum electrolyte concentration that coagulates a sol is the flocculation value.
Exam Note: Do not confuse with gold number.
Set-1 Question 76. Purple of cassius is: (a) colloidal solution of silver (b) colloidal solution of gold (c) colloidal solution of platinum (d) oxy acids of gold
Solution. Answer (from key): (b) colloidal solution of gold. Purple of cassius is a colloidal gold sol made with stannic acid.
Teacher's Note: Purple of cassius is a colloidal gold sol made with stannic acid.
Exam Note: Purple of cassius means gold sol.
Set-1 Question 77. Which type of molecules form micelles? (a) Polar molecules (b) Non-polar molecules (c) Surfactant molecules (d) Any of these
Solution. Answer (from key): (c) Surfactant molecules. Surfactant (soap/detergent) molecules, with both polar and non-polar parts, form micelles.
Teacher's Note: Surfactant (soap/detergent) molecules, with both polar and non-polar parts, form micelles.
Exam Note: Micelles need amphipathic molecules.
Set-1 Question 78. The name aquadag is given to the colloidal solution of: (a) copper in water (b) platinum in water (c) gold in water (d) graphite in water
Solution. Answer (from key): (d) graphite in water. Aquadag is colloidal graphite in water.
Teacher's Note: Aquadag is colloidal graphite in water.
Exam Note: Aquadag graphite in water; oil dag graphite in oil.
Set-1 Question 79. A liquid is found to scatter a beam of light but leaves no residue when passed through the filter paper. The liquid can be described as: (AIIMS 1993) (a) a suspension (b) oil (c) a colloidal sol (d) true solution
Solution. Answer (from key): (c) a colloidal sol. Scattering shows Tyndall effect; passing through filter paper without residue shows colloidal-size particles.
Teacher's Note: Scattering shows Tyndall effect; passing through filter paper without residue shows colloidal-size particles.
Exam Note: Tyndall effect plus filterability points to a colloid.
Set-1 Question 80. Point out the false statement: [CET (Punjab) 1991] (a) colloidal sols are homogeneous (b) colloidal sols carry +ve or -ve charge (c) colloidal sols show Tyndall effect (d) the size of colloidal particles ranges between 10-2000 Å
Solution. Answer (from key): (a) colloidal sols are homogeneous. Colloidal sols are heterogeneous (two phases), so statement (a) is false.
Teacher's Note: Colloidal sols are heterogeneous (two phases), so statement (a) is false.
Exam Note: Colloids are heterogeneous, not homogeneous.
Set-1 Question 81. The potential difference between the fixed charged layer and the diffused layer having opposite charge is called: (a) colloidal potential (b) zeta potential (c) electrostatic potential (d) none of these
Solution. Answer (from key): (b) zeta potential. The potential across the fixed and diffused layers of the double layer is the zeta (electrokinetic) potential.
Teacher's Note: The potential across the fixed and diffused layers of the double layer is the zeta (electrokinetic) potential.
Exam Note: Zeta potential equals electrokinetic potential.
Set-1 Question 82. An example of micelle is: (a) As2O3 sol (b) ruby glass (c) Na2CO3 solution (d) sodium stearate concentrated solution
Solution. Answer (from key): (d) sodium stearate concentrated solution. Concentrated sodium stearate (soap) solution contains micelles.
Teacher's Note: Concentrated sodium stearate (soap) solution contains micelles.
Exam Note: Soap above CMC gives micelles.
Set-1 Question 83. Surface tension of lyophilic sols is: [PMT (MP) 1992] (a) lower than H2O (b) more than H2O (c) equal to H2O (d) none of these
Solution. Answer (from key): (a) lower than H2O. Lyophilic sols have surface tension lower than water; lyophobic sols are close to water.
Teacher's Note: Lyophilic sols have surface tension lower than water; lyophobic sols are close to water.
Exam Note: Lyophilic: lower surface tension, higher viscosity.
Set-1 Question 84. Which is not shown by sols? [PMT (MP) 1992] (a) Adsorption (b) Tyndall effect (c) Flocculation (d) Paramagnetism
Solution. Answer (from key): (d) Paramagnetism. Sols show adsorption, Tyndall effect and flocculation; paramagnetism is not a colloidal property.
Teacher's Note: Sols show adsorption, Tyndall effect and flocculation; paramagnetism is not a colloidal property.
Exam Note: Paramagnetism is not a colloid property.
Set-1 Question 85. An example of solid-solid system is: (a) smoke (b) coke (c) synthetic gems (d) pumice stone
Solution. Answer (from key): (c) synthetic gems. Synthetic gems (coloured glass) are a solid dispersed in a solid.
Teacher's Note: Synthetic gems (coloured glass) are a solid dispersed in a solid.
Exam Note: Solid sols: gems, coloured glass.
Set-1 Question 86. Detergent action of synthetic detergents is due to their: (a) interfacial area (b) high molecular weight (c) ionisation (d) emulsifying properties
Solution. Answer (from key): (d) emulsifying properties. Detergents emulsify grease and dirt in water through their polar and non-polar ends.
Teacher's Note: Detergents emulsify grease and dirt in water through their polar and non-polar ends.
Exam Note: Cleansing is emulsification of oil and dirt.
Set-1 Question 87. Blood contains: (a) positively charged particles (b) negatively charged particles (c) neutral particles (d) negatively as well as positively charged colloids
Solution. Answer (from key): (b) negatively charged particles. Blood is a negatively charged colloid, which is why Fe3+ coagulates it.
Teacher's Note: Blood is a negatively charged colloid, which is why Fe3+ coagulates it.
Exam Note: Blood is a negative sol.
Set-1 Question 88. A colloidal solution always has at least: (CPMT 1993) (a) one-phase (b) more than two-phases (c) a true solution (d) two phases
Solution. Answer (from key): (d) two phases. A colloid has a dispersed phase and a dispersion medium, so at least two phases.
Teacher's Note: A colloid has a dispersed phase and a dispersion medium, so at least two phases.
Exam Note: Colloids have dispersed phase and medium.
Set-1 Question 89. Silica gel is commonly used as: (a) wetting agent (b) drying agent (c) solvent (d) catalyst
Solution. Answer (from key): (b) drying agent. Silica gel adsorbs moisture and is used as a drying agent.
Teacher's Note: Silica gel adsorbs moisture and is used as a drying agent.
Exam Note: Silica gel adsorbs water vapour.
Set-1 Question 90. Which is not a colloidal solution of gas in liquid? (a) Froth (b) Foams with tiny bubbles (c) Mist (d) Whipped cream
Solution. Answer (from key): (c) Mist. Mist is liquid in gas; froth, foam and whipped cream are gas in liquid.
Teacher's Note: Mist is liquid in gas; froth, foam and whipped cream are gas in liquid.
Exam Note: Mist is liquid in gas.
Set-1 Question 91. Fog is a colloidal solution of: [MLNR 1995; PMT (MP) 1991] (a) liquid particles dispersed in gas (b) gaseous particles dispersed in liquid (c) solid particles dispersed in liquid (d) solid particles dispersed in gas
Solution. Answer (from key): (a) liquid particles dispersed in gas. Fog is liquid droplets dispersed in a gas.
Teacher's Note: Fog is liquid droplets dispersed in a gas.
Exam Note: Fog is liquid in gas.
Set-1 Question 92. Emulsions of polyvinyl acetate are used in: (a) polishes (b) latex paints (c) fireworks (d) rayons
Solution. Answer (from key): (b) latex paints. Polyvinyl acetate emulsions are used in latex paints.
Teacher's Note: Polyvinyl acetate emulsions are used in latex paints.
Exam Note: Recall industrial emulsions.
Set-1 Question 93. When white light is passed through a colloidal solution containing fine suspended particles of gold, then the scattering light in a direction different from that of incident light is: (a) yellow coloured (b) blue coloured (c) green coloured (d) red coloured
Solution. Answer (from key): (b) blue coloured. Shorter (blue) wavelengths are scattered more strongly, so scattered light looks blue.
Teacher's Note: Shorter (blue) wavelengths are scattered more strongly, so scattered light looks blue.
Exam Note: Blue scatters most; Rayleigh-Tyndall scattering.
Set-1 Question 94. When a sulphur sol is evaporated, solid sulphur is left. On mixing with water no colloidal sol is formed. The sulphur sol is: (a) hydrophilic (b) hydrophobic (c) reversible (d) lyophilic
Solution. Answer (from key): (b) hydrophobic. The residue does not re-form the sol, so it is irreversible, i.e. hydrophobic.
Teacher's Note: The residue does not re-form the sol, so it is irreversible, i.e. hydrophobic.
Exam Note: Irreversible means lyophobic.
Set-1 Question 95. Tails of comets are visible due to: (a) Tyndall effect (b) reflection (c) Brownian movement (d) none of these
Solution. Answer (from key): (a) Tyndall effect. Light is scattered by dust and gas particles in the tail, the Tyndall effect.
Teacher's Note: Light is scattered by dust and gas particles in the tail, the Tyndall effect.
Exam Note: Scattering by particles makes beam visible.
Set-1 Question 96. Milk is an example of: [CPMT 1995; PET (MP) 2004; CET (J&K) 2004] (a) fat dispersed in water (b) water dispersed in fat (c) water dispersed in oil (d) fat dispersed in fat
Solution. Answer (from key): (a) fat dispersed in water. Milk is fat dispersed in water, an O/W emulsion.
Teacher's Note: Milk is fat dispersed in water, an O/W emulsion.
Exam Note: Milk is O/W emulsion.
Set-1 Question 97. Smog is an example of: (a) ice dispersed in air (b) water dispersed in air (c) smoke dispersed in air (d) smoke and water dispersed in air
Solution. Answer (from key): (d) smoke and water dispersed in air. Smog is smoke plus fog, i.e. smoke and water dispersed in air.
Teacher's Note: Smog is smoke plus fog, i.e. smoke and water dispersed in air.
Exam Note: Smog = smoke + fog.
Set-1 Question 98. Peptization denotes: [ISM (Dhanbad) 1994] (a) digestion of food (b) hydrolysis of proteins (c) breaking of dispersion into colloidal state (d) precipitation of a solid from colloidal state
Solution. Answer (from key): (c) breaking of dispersion into colloidal state. Peptization breaks a precipitate into colloidal particles on adding a small amount of electrolyte.
Teacher's Note: Peptization breaks a precipitate into colloidal particles on adding a small amount of electrolyte.
Exam Note: Peptization turns precipitate into sol.
Set-1 Question 99. Whipped cream is an example of: (options: dispersion medium, dispersed phase) (a) Liquid, Gas (b) Liquid, Liquid (c) Liquid, Solid (d) Gas, Liquid (a) Liquid medium, Gas phase (b) Liquid medium, Liquid phase (c) Liquid medium, Solid phase (d) Gas medium, Liquid phase
Solution. Answer (from key): (a) Liquid medium, Gas phase. Whipped cream is a foam: gas bubbles dispersed in a liquid medium.
Teacher's Note: Whipped cream is a foam: gas bubbles dispersed in a liquid medium.
Exam Note: Foam is gas dispersed in liquid.
Set-1 Question 100. Cottrell precipitator acts on which of the following principle? (a) Hardy-Schulze rule (b) Distribution law (c) Le Chatelier's principle (d) Neutralization of charge on the colloidal particles
Solution. Answer (from key): (d) Neutralization of charge on the colloidal particles. Charged smoke particles are neutralised at oppositely charged electrodes and precipitate.
Teacher's Note: Charged smoke particles are neutralised at oppositely charged electrodes and precipitate.
Exam Note: Cottrell uses charge neutralisation at electrodes.
Set-1 Question 101. CMC (critical micelle concentration) is: (a) concentration at which micelles are destroyed (b) concentration at which micelle formation starts (c) concentration of electrolyte added to destroy the micelles (d) concentration of micelles at room temperature
Solution. Answer (from key): (b) concentration at which micelle formation starts. Micelle formation starts at the critical micelle concentration.
Teacher's Note: Micelle formation starts at the critical micelle concentration.
Exam Note: CMC is where micelles begin forming.
Set-1 Question 102. Cod liver oil is: (CPMT 1997) (a) fat dispersed in water (b) water dispersed in fat (c) water dispersed in oil (d) fat dispersed in fat
Solution. Answer (from key): (c) water dispersed in oil. The key prints (c): water dispersed in oil.
Teacher's Note: The key prints (c): water dispersed in oil.
Exam Note: Learn W/O examples: butter, cold cream, cod liver oil.
Set-1 Question 103. Which is not lyophilic colloid? [PMT (MP) 1998] (a) Milk (b) Gum (c) Fog (d) Blood
Solution. Answer (from key): (c) Fog. Fog (liquid in gas) is not lyophilic; gum, milk and blood are lyophilic-type colloids.
Teacher's Note: Fog (liquid in gas) is not lyophilic; gum, milk and blood are lyophilic-type colloids.
Exam Note: Lyophilic examples: gum, gelatin, starch, proteins.
Set-1 Question 104. At the critical micelle concentration, the surfactant molecules: (CBSE 1998) (a) decompose (b) dissociate (c) associate (d) become completely soluble
Solution. Answer (from key): (c) associate. At CMC surfactant molecules associate to form micelles.
Teacher's Note: At CMC surfactant molecules associate to form micelles.
Exam Note: CMC means association begins.
Set-1 Question 105. Which of the following ions can cause coagulation of proteins? (KCET 2000) (a) Ag+ (b) Na+ (c) Mg2+ (d) Ca2+
Solution. Answer (from key): (a) Ag+. Heavy-metal ions such as Ag+ coagulate proteins.
Teacher's Note: Heavy-metal ions such as Ag+ coagulate proteins.
Exam Note: Heavy metal ions precipitate proteins.
Set-1 Question 106. In Brownian movement or motion the paths of the particles are: (KMEE 2000) (a) linear (b) zig-zag (c) uncertain (d) curved
Solution. Answer (from key): (b) zig-zag. Particles move in random zig-zag paths due to unequal molecular bombardment.
Teacher's Note: Particles move in random zig-zag paths due to unequal molecular bombardment.
Exam Note: Zig-zag random path.
Set-1 Question 107. Which is used for ending charge on colloidal solutions? (CBSE 2000) (a) Electrons (b) Electrolysis (c) Positively charged ions (d) Compounds
Solution. Answer (from key): (b) Electrolysis. The key prints (b), electrolysis, as the method used to remove charge on colloidal particles.
Teacher's Note: The key prints (b), electrolysis, as the method used to remove charge on colloidal particles.
Exam Note: Charge removal is linked to electrolysis.
Set-1 Question 108. Cloud or fog is a colloidal system in which the dispersed phase and the dispersion medium are: (KCET 2000) (a) gas, liquid (b) liquid, gas (c) liquid, liquid (d) solid, solid
Solution. Answer (from key): (b) liquid, gas. Cloud and fog are liquid droplets in gas.
Teacher's Note: Cloud and fog are liquid droplets in gas.
Exam Note: Dispersed phase first, then medium.
Set-1 Question 109. The electrolyte which has the least effect in the coagulation of Fe(OH)3 sol is: [KCET 2008] (a) potassium carbonate (b) sodium sulphate (c) potassium ferrocyanide (d) potassium iodide
Solution. Corrected: Fe(OH)3 is a positive sol, so anions coagulate it and the monovalent I- of KI is least effective, so (d). (The printed key gives (c), which is the most effective ion, [Fe(CN)6]4-.) Answer: (d) potassium iodide.
Teacher's Note: Fe(OH)3 is a positive sol, so anions coagulate it and the monovalent I- of KI is least effective, so (d).
Exam Note: Positive sol: least-charged anion is least effective.
Set-1 Question 110. Blood may be purified by: [PMT (MP) 2000] (a) dialysis (b) electro-osmosis (c) coagulation (d) filtration
Solution. Answer (from key): (a) dialysis. Haemodialysis removes urea and other small molecules from blood through a membrane.
Teacher's Note: Haemodialysis removes urea and other small molecules from blood through a membrane.
Exam Note: Dialysis purifies blood in kidney machines.
Set-1 Question 111. Gold number was given by: (a) Ostwald (b) Zsigmondy (c) William and Chang (d) Langmuir
Solution. Answer (from key): (b) Zsigmondy. Zsigmondy introduced the gold number.
Teacher's Note: Zsigmondy introduced the gold number.
Exam Note: Gold number: Zsigmondy.
Set-1 Question 112. The diameter of colloidal particle ranges from: (KCET 2004) (a) 10-9 m to 10-6 m (b) 10-9 m to 10-12 m (c) 103 m to 10-3 m (d) 10-3 m to 10-6 m
Solution. Answer (from key): (a) 10-9 m to 10-6 m. 1 nm to 1000 nm is 10-9 to 10-6 m.
Teacher's Note: 1 nm to 1000 nm is 10-9 to 10-6 m.
Exam Note: Colloid range is 1 nm to 1000 nm.
Set-1 Question 113. The Tyndall effect is not observed in: (a) suspensions (b) emulsions (c) colloidal solutions (d) true solutions
Solution. Answer (from key): (d) true solutions. True-solution particles are too small to scatter light.
Teacher's Note: True-solution particles are too small to scatter light.
Exam Note: Tyndall needs colloidal-size particles.
Set-1 Question 114. Which one is example of Micelle's system? (a) Soap + water (b) Rubber + benzene (c) Protein + water (d) None of these
Solution. Answer (from key): (a) Soap + water. Soap in water above CMC forms micelles.
Teacher's Note: Soap in water above CMC forms micelles.
Exam Note: Soap plus water forms micelles.
Set-1 Question 115. Sedimentation potential is the reverse of: (a) electro-osmosis (b) electrophoresis (c) electrokinetic potential (d) Dorn potential
Solution. Answer (from key): (b) electrophoresis. Electrophoresis applies a field to move particles; sedimentation potential arises when particles settle, its reverse.
Teacher's Note: Electrophoresis applies a field to move particles; sedimentation potential arises when particles settle, its reverse.
Exam Note: Dorn effect reverses electrophoresis.
Set-1 Question 116. Smoke has generally blue tinge. It is due to: (a) scattering (b) coagulation (c) Brownian movement (d) electrophoresis
Solution. Answer (from key): (a) scattering. Smoke particles scatter blue light, the Tyndall effect.
Teacher's Note: Smoke particles scatter blue light, the Tyndall effect.
Exam Note: Blue tinge is scattered light.
Set-1 Question 117. On adding AgNO3 solution to KI solution, a negatively charged colloidal sol will be formed in which of the following conditions? (a) 100 mL of 0.1 M AgNO3 + 100 mL of 0.1 M KI (b) 100 mL of 0.1 M AgNO3 + 50 mL of 0.2 M KI (c) 100 mL of 0.2 M AgNO3 + 100 mL of 0.1 M KI (d) 100 mL of 0.1 M AgNO3 + 100 mL of 0.15 M KI
Solution. Answer (from key): (d) 100 mL of 0.1 M AgNO3 + 100 mL of 0.15 M KI. AgI adsorbs I- when KI is in excess. Moles: (d) AgNO3 = 10 mmol, KI = 15 mmol, so excess I- gives a negative sol; (a) and (b) are equal, (c) has excess Ag+.
Teacher's Note: AgI adsorbs I- when KI is in excess.
Exam Note: Compute mmol of each; excess I- gives negative sol.
Set-1 Question 118. Peptization of SnO2 by NaOH gives: (a) [SnO2]SnO32- : 2Na+ (b) [SnO2]Sn4+ : O2- (c) [SnO2]Na+ : OH- (d) [SnO2]Sn4+ : OH-
Solution. Answer (from key): (a) [SnO2]SnO32- : 2Na+. NaOH forms stannate, which adsorbs on SnO2 to give a negative sol with Na+ counter ions.
Teacher's Note: NaOH forms stannate, which adsorbs on SnO2 to give a negative sol with Na+ counter ions.
Exam Note: Peptizing ion adsorbed, counter ion in diffuse layer.
Set-1 Question 119. Alum helps in purifying water by: (AIEEE 2002) (a) forming Si complex with clay particles (b) sulphate part which combines with the dirt and remove it (c) aluminium which coagulates the mud particles (d) making the mud water soluble
Solution. Answer (from key): (c) aluminium which coagulates the mud particles. Al3+ from alum coagulates negatively charged mud particles.
Teacher's Note: Al3+ from alum coagulates negatively charged mud particles.
Exam Note: Al3+ neutralises charge of clay sol.
Set-1 Question 120. Surface tension of lyophilic sols is: [PMT (MP) 2002] (a) lower than that of H2O (b) equal to that of H2O (c) more than that of H2O (d) none of these
Solution. Answer (from key): (a) lower than that of H2O. Solvated lyophilic particles lower the surface tension below that of water.
Teacher's Note: Solvated lyophilic particles lower the surface tension below that of water.
Exam Note: Lyophilic: lower surface tension.
Set-1 Question 121. Arsenic sulphide is negative sol. The reagent with least precipitating power is: [PMT (Manipal) 2002] (a) AlCl3 (b) NaCl (c) CaF2 (d) glucose
Solution. Answer (from key): (d) glucose. Glucose is a non-electrolyte and has no ions to neutralise the charge, so it has least power.
Teacher's Note: Glucose is a non-electrolyte and has no ions to neutralise the charge, so it has least power.
Exam Note: Non-electrolyte has no coagulating power.
Set-1 Question 122. Which one of the following is correctly matched? [CEE (Tamil Nadu) 2002] (a) Emulsion-curd (b) Foam-mist (c) Aerosol-smoke (d) Solid sol-cake
Solution. Answer (from key): (c) Aerosol-smoke. Smoke is solid in gas, an aerosol; curd is a gel, mist an aerosol, cake a foam.
Teacher's Note: Smoke is solid in gas, an aerosol; curd is a gel, mist an aerosol, cake a foam.
Exam Note: Check each pair's phase.
Set-1 Question 123. When H2S gas is passed through nitric acid, the product is: [CEE (Kerala) 2002] (a) rhombic sulphur (b) prismatic sulphur (c) amorphous sulphur (d) monoclinic sulphur (e) plastic sulphur
Solution. Answer (from key): (c) amorphous sulphur. Oxidation of H2S by HNO3 gives sulphur as a colloidal, amorphous form.
Teacher's Note: Oxidation of H2S by HNO3 gives sulphur as a colloidal, amorphous form.
Exam Note: Colloidal sulphur is amorphous.
Set-1 Question 124. Tyndall effect is shown by: [CECE (Bihar) Pre 2004] (a) precipitate (b) sol (c) plasma (d) solution
Solution. Answer (from key): (b) sol. Sol particles are of colloidal size and scatter light.
Teacher's Note: Sol particles are of colloidal size and scatter light.
Exam Note: Tyndall effect is the test for sols.
Set-1 Question 125. On addition of one mL of 10% NaCl solution to 10 mL gold sol in presence of 0.25 gm of starch, the coagulation is just prevented, starch has gold number: [PMT (MP) 2004] (a) 0.25 (b) 0.025 (c) 2.5 (d) none of these
Solution. Answer (from key): (d) none of these. 0.25 g = 250 mg of starch protects 10 mL gold sol from 1 mL of 10% NaCl, so gold number = 250, not among (a) to (c); hence (d).
Teacher's Note: 0.25 g is 250 mg starch per 10 mL gold sol: gold number 250.
Exam Note: Gold number is in mg; convert 0.25 g to 250 mg.
Set-1 Question 126. Which of the following forms cationic micelles above certain concentration? [CBSE (PMT) 2004] (a) Sodium dodecyl sulphate (b) Sodium acetate (c) Urea (d) Cetyltrimethyl ammonium bromide
Solution. Answer (from key): (d) Cetyltrimethyl ammonium bromide. Cetyltrimethylammonium bromide is a cationic surfactant, so its micelles are cationic.
Teacher's Note: Cetyltrimethylammonium bromide is a cationic surfactant, so its micelles are cationic.
Exam Note: Cationic detergent has quaternary ammonium head.
Set-1 Question 127. The smog is essentially caused by the presence of: (AIEEE 2004) (a) O2 and O3 (b) O2 and N2 (c) oxides of sulphur and nitrogen (d) O3 and N2
Solution. Answer (from key): (c) oxides of sulphur and nitrogen. Smog is caused by oxides of sulphur and nitrogen along with smoke and fog.
Teacher's Note: Smog is caused by oxides of sulphur and nitrogen along with smoke and fog.
Exam Note: Smog pollutants: SO2 and NOx.
Set-1 Question 128. Which one of the following is most effective in causing the coagulation of an As2S3 sol? (EAMCET 2009) (a) KCl (b) AlCl3 (c) MgSO4 (d) K3[Fe(CN)6]
Solution. Answer (from key): (b) AlCl3. As2S3 is negative, so the highest-valent cation, Al3+, is most effective.
Teacher's Note: As2S3 is negative, so the highest-valent cation, Al3+, is most effective.
Exam Note: Negative sol: highest-valent cation.
Set-1 Question 129. The fresh precipitate can be transformed in colloidal solution by: [CET (J&K) 2004] (a) peptization (b) coagulation (c) diffusion (d) none of these
Solution. Answer (from key): (a) peptization. Peptization converts a fresh precipitate to a sol using a small amount of electrolyte.
Teacher's Note: Peptization converts a fresh precipitate to a sol using a small amount of electrolyte.
Exam Note: Peptization: precipitate to sol.
Set-1 Question 130. Potassium stearate is obtained by the saponification of an oil or a fat. It has formula CH3-(CH2)16-COO- K+. The molecule has a lyophobic end (CH3-) and a lyophilic end COO- K+. Potassium stearate is an example for: [PET (Kerala) 2005] (a) lyophobic colloid (b) lyophilic colloid (c) multimolecular colloid (d) macromolecular colloid (e) associated colloid or micelle
Solution. Answer (from key): (e) associated colloid or micelle. Soap with polar head and long non-polar tail aggregates above CMC into micelles, an associated colloid.
Teacher's Note: Soap with polar head and long non-polar tail aggregates above CMC into micelles, an associated colloid.
Exam Note: Soaps are associated colloids.
Set-1 Question 131. Which one of the following forms micelles in aqueous solution above certain concentration? [CBSE (PMT) 2005] (a) Dodecyl trimethyl ammonium chloride (b) Glucose (c) Urea (d) Pyridinium chloride
Solution. Answer (from key): (a) Dodecyl trimethyl ammonium chloride. Dodecyltrimethylammonium chloride is a surfactant with a long chain, so it forms micelles; glucose and urea do not.
Teacher's Note: Dodecyltrimethylammonium chloride is a surfactant with a long chain, so it forms micelles; glucose and urea do not.
Exam Note: Long hydrocarbon chain plus ionic head forms micelles.
Set-1 Question 132. Muddy water can be purified through coagulation using: [CET (J&K) 2005] (a) common salt (b) alums (c) sand (d) lime
Solution. Answer (from key): (b) alums. Alum supplies Al3+, which coagulates the negative clay particles.
Teacher's Note: Alum supplies Al3+, which coagulates the negative clay particles.
Exam Note: Alum is the standard coagulant for muddy water.
Set-1 Question 133. The disperse phase in colloidal iron(III) hydroxide and colloidal gold is positively and negatively charged respectively. Which of the following is not correct? (AIEEE 2005) (a) Magnesium chloride solution coagulates the gold sol more readily than iron(III) hydroxide sol (b) Sodium sulphate solution causes coagulation in both sols (c) Mixing of the sols has no effect (d) Coagulation in both sols can be brought about by electrophoresis
Solution. Answer (from key): (c) Mixing of the sols has no effect. Oppositely charged sols mutually coagulate on mixing, so (c) is incorrect.
Teacher's Note: Oppositely charged sols mutually coagulate on mixing, so (c) is incorrect.
Exam Note: Opposite-charged sols coagulate each other.
Set-1 Question 134. An emulsifier is a substance which: (AIEEE 2005) (a) stabilises the emulsion (b) homogenises the emulsion (c) coagulates the emulsion (d) accelerates the dispersion of liquid in liquid
Solution. Answer (from key): (a) stabilises the emulsion. An emulsifier stabilises an emulsion by forming a film around droplets.
Teacher's Note: An emulsifier stabilises an emulsion by forming a film around droplets.
Exam Note: Emulsifier stabilises, does not homogenise.
Set-1 Question 135. Gold number is associated with: [BHU (Mains) 2007; AMU (Engg.) 2010] (a) electrophoresis (b) purple of cassius (c) protective colloid (d) amount of pure gold
Solution. Answer (from key): (c) protective colloid. Gold number measures the protective power of a protective colloid.
Teacher's Note: Gold number measures the protective power of a protective colloid.
Exam Note: Gold number tests protective colloids.
Set-1 Question 136. Which one of the following is a false statement? [PMT (Kerala) 2007] (a) Cell fluid is an example of sol (b) Butter is an example of gel (c) Hair cream is an example of emulsion (d) Whipped cream is an example of foam (e) Cheese is an example of emulsion
Solution. Answer (from key): (e) Cheese is an example of emulsion. Cheese is a gel (liquid in solid), not an emulsion, so (e) is false.
Teacher's Note: Cheese is a gel (liquid in solid), not an emulsion, so (e) is false.
Exam Note: Cheese is a gel; butter is a gel too.
Set-1 Question 137. The presence of electric charge on colloidal particles is indicated by the property, called: [CET (J&K) 2007] (a) dialysis (b) solubility (c) electrophoresis (d) osmosis
Solution. Answer (from key): (c) electrophoresis. Particle movement in an electric field (electrophoresis) shows that particles carry charge.
Teacher's Note: Particle movement in an electric field (electrophoresis) shows that particles carry charge.
Exam Note: Electrophoresis proves colloidal charge.
Set-1 Question 138. Which of the following properties are characteristic of lyophilic sols? 1. Low viscosity, 2. High viscosity, 3. Reversibility and 4. Coagulation by electrolytes at low concentration. Select the correct answer using the codes given below: (SCRA 2007) (a) 2, 3 and 4 (b) 2 and 3 only (c) 1 and 4 only (d) 1 and 3 only
Solution. Corrected: lyophilic sols have high viscosity (2) and are reversible (3); they are not coagulated by small amounts of electrolyte, so (b). (The printed key gives (c).) Answer: (b) 2 and 3 only.
Teacher's Note: Lyophilic sols have high viscosity and are reversible, and resist small amounts of electrolyte; so statements 2 and 3.
Exam Note: Lyophilic: high viscosity, reversible, resist electrolytes.
Set-1 Question 139. In an electrical field, the particles of a colloidal system move towards cathode. The coagulation of the same sol is studied using K2SO4 (I), Na3PO4 (II), K4[Fe(CN)6] (III) and NaCl (IV). Their coagulating power should be: [PMT(Kerala) 2008] (a) (I) > (II) > (III) > (IV) (b) (III) > (II) > (I) > (IV) (c) (II) > (I) > (III) > (IV) (d) (IV) > (III) > (I) > (II) (e) (IV) > (I) > (II) > (III)
Solution. Answer (from key): (b) (III) > (II) > (I) > (IV). Movement to cathode means a positive sol, so anions coagulate it; power rises with anion charge: 4- > 3- > 2- > 1-.
Teacher's Note: Movement to cathode means a positive sol, so anions coagulate it and power rises with anion charge.
Exam Note: Cathode movement means positive sol, anions act.
Set-1 Question 140. Cetyl trimethyl ammonium chloride is which type of detergent? [CET (Gujarat) 2008] (a) Cationic (b) Anionic (c) Biosoft (d) Non-ionic
Solution. Answer (from key): (a) Cationic. The large cetyltrimethylammonium ion is the active cation, so it is a cationic detergent.
Teacher's Note: The large cetyltrimethylammonium ion is the active cation, so it is a cationic detergent.
Exam Note: Quaternary ammonium detergents are cationic.
Set-1 Question 141. The effective ion used in clarification of water is: (KCET 2008) (a) Al3+ (b) Ca2+ (c) SO42- (d) PO43-
Solution. Answer (from key): (a) Al3+. Al3+ from alum coagulates the negative colloidal impurities.
Teacher's Note: Al3+ from alum coagulates the negative colloidal impurities.
Exam Note: Highest-valent cation clarifies negative muddy sols.
Set-1 Question 142. The number of moles of lead nitrate needed to coagulate 2 mole of colloidal [AgI]I- is: [PET (Kerala) 2008] (a) 2 (b) 1 (c) 1/2 (d) 2/3 (e) 5/2
Solution. Answer (from key): (b) 1. Hint: 2[AgI]I- + Pb2+ → PbI2 + 2AgI, so one mole of Pb(NO3)2 is required for 2 moles of [AgI]I-.
Teacher's Note: Hint: 2[AgI]I- + Pb2+ → PbI2 + 2AgI, so one mole of Pb(NO3)2 is required for 2 moles of [AgI]I-.
Exam Note: Balance charge: one Pb2+ neutralises two I-.
Set-1 Question 143. Among the electrolytes Na2SO4, CaCl2, Al2(SO4)3 and NH4Cl, the most effective coagulating agent for Sb2S3 sol is: (IIT 2009) (a) Na2SO4 (b) CaCl2 (c) Al2(SO4)3 (d) NH4Cl
Solution. Answer (from key): (c) Al2(SO4)3. Hint: Sb2S3 sol is negative, so Al2(SO4)3 is most effective; order of coagulating power: Al3+ > Ca2+ > Na+ > NH4+.
Teacher's Note: Hint: Sb2S3 sol is negative, so Al2(SO4)3 is most effective; order of coagulating power: Al3+ > Ca2+ > Na+ >
Exam Note: Negative sol: Al3+ beats Ca2+, Na+, NH4+.
Set-1 Question 144. A micelle formed during the cleansing action of soap is: [EAMCET (Engg.) 2010] (a) a discrete particle of soap (b) aggregated particles of soap and dirt (c) a discrete particle of dust (d) an aggregated particle of dust and water
Solution. Answer (from key): (b) aggregated particles of soap and dirt. Soap tails trap dirt inside a micelle, so the micelle consists of aggregated soap and dirt.
Teacher's Note: Soap tails trap dirt inside a micelle, so the micelle consists of aggregated soap and dirt.
Exam Note: Hydrocarbon tails trap grease inside micelle.
Set-1 Question 145. The dispersed phase and dispersion medium in soap lather are respectively: [PET (Kerala) 2010] (a) gas and liquid (b) liquid and gas (c) solid and gas (d) solid and liquid
Solution. Answer (from key): (a) gas and liquid. Soap lather is a foam, gas bubbles dispersed in liquid.
Teacher's Note: Soap lather is a foam, gas bubbles dispersed in liquid.
Exam Note: Foam: gas dispersed in liquid.
Objective Questions: Set-2 (more than one correct answer)
Set-2 Question 1. Lysione is not used as: (a) disinfectant (b) germ killer (c) treating eye disease (d) anti-cancer drug
Solution. Answer (from key): (b) germ killer; (c) treating eye disease; (d) anti-cancer drug. Lysione is used as a disinfectant, so the options not describing its use are (b), (c) and (d).
Teacher's Note: Lysione is used as a disinfectant, so the options not describing its use are (b), (c) and (d).
Exam Note: Read the question as 'not used as'.
Set-2 Question 2. Which of the following are macromolecular colloids? (a) Starch (b) Soap (c) Detergent (d) Cellulose
Solution. Answer (from key): (a) Starch; (d) Cellulose. Starch and cellulose are natural macromolecules; soap and detergent are associated colloids.
Teacher's Note: Starch and cellulose are natural macromolecules; soap and detergent are associated colloids.
Exam Note: Macromolecular: starch, cellulose, proteins, rubber.
Set-2 Question 3. Multimolecular colloids are present in: (a) sol of sulphur (b) sol of proteins (c) sol of gold (d) soap solution
Solution. Answer (from key): (a) sol of sulphur; (c) sol of gold. Sulphur and gold sols are aggregates of atoms or small molecules; proteins are macromolecular and soap is associated.
Teacher's Note: Sulphur and gold sols are aggregates of atoms or small molecules; proteins are macromolecular and soap is associated.
Exam Note: Multimolecular: S, Au; not proteins or soap.
Set-2 Question 4. Methods used for the preparation of colloidal solutions are: (a) peptization (b) Bredig's arc method (c) ultrasonic dispersion (d) coagulation
Solution. Answer (from key): (a) peptization; (b) Bredig's arc method; (c) ultrasonic dispersion. Peptization, Bredig's arc and ultrasonic dispersion make sols; coagulation destroys them.
Teacher's Note: Peptization, Bredig's arc and ultrasonic dispersion make sols; coagulation destroys them.
Exam Note: Coagulation is a destruction method.
Set-2 Question 5. Isoelectric point is the pH at which colloidal particles: (a) coagulate (b) become electrically neutral (c) can move toward either electrode (d) none of the above
Solution. Corrected: at the isoelectric point the particles carry no net charge and coagulate, so (a) and (b); a neutral particle does not migrate to either electrode, so (c) is wrong. (The printed key gives (a, b, c).) Answer: (a) coagulate; (b) become electrically neutral.
Teacher's Note: At the isoelectric point particles carry no net charge and coagulate; a neutral particle migrates to neither electrode.
Exam Note: Net zero charge: no migration, easiest coagulation.
Set-2 Question 6. Consider the following statements for micelles, which is/are correct? (a) At critical micelle concentration, several properties of solution of surfactants such as molar conductivity, surface tension and osmotic pressure change (b) Micelles from ionic surfactants can be formed only above a certain temperature called the Kraft temperature (c) Micelle formation is exothermic (d) Micelles are associated colloids
Solution. Answer (from key): (a) At critical micelle concentration, several properties of solution of surfactants such as molar conductivity, surface tension and osmotic pressure change; (b) Micelles from ionic surfactants can be formed only above a certain temperature called the Kraft temperature; (d) Micelles are associated colloids. Properties change sharply at CMC, ionic surfactants micellize only above the Kraft temperature, and micelles are associated colloids.
Teacher's Note: Properties change sharply at CMC, ionic surfactants micellize only above the Kraft temperature, and micelles are associated colloids.
Exam Note: CMC marks sharp property changes; Kraft temperature needed.
Set-2 Question 7. Which of the following are negative colloids? (a) Fe(OH)3 sol (b) As2S3 sol (c) Blood (d) Gold sol
Solution. Answer (from key): (b) As2S3 sol; (c) Blood; (d) Gold sol. As2S3, blood and gold sols are negative; Fe(OH)3 sol is positive.
Teacher's Note: As2S3, blood and gold sols are negative; Fe(OH)3 sol is positive.
Exam Note: Metal sulphides and metals are negative; hydroxides positive.
Set-2 Question 8. Which of the following are examples of aerosols? (a) Whipped cream (b) Cloud (c) Fog (d) Soap lather
Solution. Answer (from key): (b) Cloud; (c) Fog. Cloud and fog are liquid in gas, aerosols; whipped cream and lather are foams.
Teacher's Note: Cloud and fog are liquid in gas, aerosols; whipped cream and lather are foams.
Exam Note: Aerosol means dispersion in gas.
Set-2 Question 9. Tyndall effect is applicable when: (a) the diameter of the dispersed particles is not much smaller than the wavelength of the light used (b) the diameter of the dispersed particles is much smaller than the wavelength of the light used (c) the refractive indices of the dispersed phase and the dispersion medium must be same (d) the refractive indices of the dispersed phase and the dispersion medium must differ greatly in magnitude
Solution. Answer (from key): (a) the diameter of the dispersed particles is not much smaller than the wavelength of the light used; (d) the refractive indices of the dispersed phase and the dispersion medium must differ greatly in magnitude. Scattering requires particle size comparable to wavelength and a large refractive-index difference between phases.
Teacher's Note: Scattering requires particle size comparable to wavelength and a large refractive-index difference between phases.
Exam Note: Two conditions: size near wavelength, refractive index mismatch.
Assertion-Reason Type Questions
Assertion-Reason Question 1. (A) Colloidal silver iodide is prepared by adding silver nitrate in slight excess to potassium iodide solution. When subjected to an electric field, the colloidal particles migrate to the anode.
(R) Colloidal particles absorb ions and thus become electrically charged.
Solution. Answer (from key): (d), Statement 1 false, Statement 2 true. With AgNO3 in slight excess the AgI sol adsorbs Ag+, becomes positive and moves to the cathode, so (A) is incorrect; (R) is correct.
Teacher's Note: With slight excess AgNO3 the AgI sol adsorbs Ag+, becomes positive and moves to the cathode; A is incorrect.
Exam Note: Excess Ag+ gives positive AgI sol, moves to cathode.
Assertion-Reason Question 2. (A) Lyophilic colloids such as starch, gelatin, etc., act as protective colloids.
(R) Protective power of lyophilic colloids is expressed in terms of gold number.
Solution. Answer (from key): (b), both statements true, but Statement 2 is not a correct explanation of Statement 1. Both statements are correct but gold number only measures protective power; it does not explain why they protect.
Teacher's Note: Both statements are correct but gold number only measures protective power; it does not explain why they protect.
Exam Note: Statement of fact versus explanation of cause.
Assertion-Reason Question 3. (A) True solutions do not exhibit Tyndall effect.
(R) In true solutions, size of solute particles is much smaller than the wavelength of light used.
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. Solute particles in a true solution are too small to scatter light, so (R) explains (A).
Teacher's Note: Solute particles in a true solution are too small to scatter light, so (R) explains (A).
Exam Note: Particle size below wavelength means no scattering.
Assertion-Reason Question 4. (A) The micelle formed by sodium stearate in water has -COO- groups at the surface.
(R) Surface tension of water is reduced by the addition of stearate. (AIIMS 2003)
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. The polar head groups face water at the micelle surface, and the amphipathic stearate also lowers surface tension, as the key accepts for (a).
Teacher's Note: Polar COO- heads face water at the micelle surface; stearate also lowers the surface tension of water.
Exam Note: Polar head outside, hydrocarbon tail inside.
Assertion-Reason Question 5. (A) Lyophilic sols are more stable than lyophobic sols.
(R) Lyophilic sols are highly hydrated in the solution.
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. The solvation layer around lyophilic particles stabilises them, so (R) explains (A).
Teacher's Note: The solvation layer around lyophilic particles stabilises them, so (R) explains (A).
Exam Note: Hydration sheath explains lyophilic stability.
Assertion-Reason Question 6. (A) Colloidal sol. of Fe(OH)3 formed by peptization carries positive charge.
(R) During the formation of positively charged colloidal particles of Fe(OH)3, the electrons are lost by the colloidal particles of Fe(OH)3.
Solution. Answer (from key): (c), Statement 1 true, Statement 2 false. The sol is positive because Fe(OH)3 adsorbs Fe3+ ions, not because electrons are lost, so (R) is incorrect.
Teacher's Note: The sol is positive because Fe(OH)3 adsorbs Fe3+ ions, not because electrons are lost, so (R) is incorrect.
Exam Note: Charge arises from ion adsorption, not electron loss.
Assertion-Reason Question 7. (A) Colloidal solutions are purified by dialysis.
(R) In the process of dialysis, colloidal particles pass through parchment paper.
Solution. Answer (from key): (c), Statement 1 true, Statement 2 false. Dialysis removes small molecules through the membrane while colloidal particles cannot pass, so (R) is incorrect.
Teacher's Note: Dialysis removes small molecules through the membrane while colloidal particles cannot pass, so (R) is incorrect.
Exam Note: Colloids stay behind; crystalloids pass the membrane.
Assertion-Reason Question 8. (A) Fe3+ can be used for coagulation of As2S3 sol.
(R) Fe3+ reacts with As2S3 to give Fe2S3. (AIIMS 2006)
Solution. Answer (from key): (c), Statement 1 true, Statement 2 false. Fe3+ coagulates the negative sol by charge neutralisation, not by reacting to form Fe2S3.
Teacher's Note: Fe3+ coagulates the negative sol by charge neutralisation, not by reacting to form Fe2S3.
Exam Note: Coagulation is charge neutralisation, not reaction.
Assertion-Reason Question 9. (A) Fat is digested in the intestine by emulsification.
(R) Bile salts stabilize the emulsion so formed.
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. Bile salts emulsify fat and stabilise the emulsion, enabling digestion, so (R) explains (A).
Teacher's Note: Bile salts emulsify fat and stabilise the emulsion, enabling digestion, so (R) explains (A).
Exam Note: Bile salts act as emulsifying agents.
Assertion-Reason Question 10. (A) NH3Cl and RCOONa are colloidal electrolyte.
(R) The substances which behave as electrolyte below a certain concentration limit, beyond this limit colloidal sol. is formed, are called colloidal electrolyte.
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. Colloidal electrolytes act as normal electrolytes when dilute and form micelles above CMC; the key accepts (a). (The printed 'NH3Cl' is as in the book.)
Teacher's Note: Colloidal electrolytes act as normal electrolytes when dilute and form micelles above CMC; the key accepts (a).
Exam Note: Colloidal electrolytes micellize above CMC.
Assertion-Reason Question 11. (A) Sulphide ores are concentrated by froth flotation process.
(R) Pine oil forms emulsion in water.
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. Pine oil forms a froth in water that carries the sulphide particles, so (R) explains (A).
Teacher's Note: Pine oil forms a froth in water that carries the sulphide particles, so (R) explains (A).
Exam Note: Froth flotation needs frothing agent.
Assertion-Reason Question 12. (A) The conversion of fresh precipitate to colloidal state is called peptization.
(R) It is caused by addition of common ions. (AIIMS 2007)
Solution. Answer (from key): (b), both statements true, but Statement 2 is not a correct explanation of Statement 1. Both are correct, but the cause is adsorption of a common ion on particles, which (R) states without explaining the definition.
Teacher's Note: Peptization means a fresh precipitate turns colloidal, caused by adsorption of a common ion; both true.
Exam Note: Peptization uses a common ion, here the key says (b).
Assertion-Reason Question 13. (A) Surfactant molecules form micelles above the critical micelle concentration (CMC).
(R) The conductance of solution of surfactant molecules decreases sharply at the (CMC).
Solution. Answer (from key): (b), both statements true, but Statement 2 is not a correct explanation of Statement 1. Both are correct, but the conductance change at CMC is an observed effect, not the reason for micelle formation.
Teacher's Note: Both are correct, but the conductance change at CMC is an observed effect, not the reason for micelle formation.
Exam Note: CMC changes properties but does not cause micelles.
Assertion-Reason Question 14. (A) Soap and detergent are macro-molecular colloids.
(R) Soap and detergent are molecular of large size.
Solution. Answer (from key): (d), Statement 1 false, Statement 2 true. Soap and detergent are associated colloids (micelles), so (A) is incorrect; (R) is correct as they have large molecular size.
Teacher's Note: Soap and detergent are associated colloids (micelles), so (A) is incorrect; (R) is correct as they have large molecular size.
Exam Note: Soaps form micelles; not macromolecules.
Assertion-Reason Question 15. (A) Gold sol is hydrophobic and multimolecular.
(R) Gold sol is prepared by Bredig's arc method.
Solution. Answer (from key): (b), both statements true, but Statement 2 is not a correct explanation of Statement 1. Both are correct but the method of preparation does not explain the sol's type.
Teacher's Note: Both are correct but the method of preparation does not explain the sol's type.
Exam Note: Preparation method does not explain classification.
Brain Storming Problems: Objective Questions for IIT Aspirants
Brain Storming Question 1. Which of the following statements are correct? 1. On the application of an electric field, the particles of lyophobic sol may move in either direction or not move at all. 2. Surface tension of lyophobic sols is similar to that of the dispersion medium. 3. Electro-osmosis is the movement of the particles of dispersion medium under the influence of an electric field. Codes: (a) 1, 2 and 3 (b) 1 and 3 (c) 2 and 3 (d) 1 and 2
Solution. Answer (from key): (c) 2 and 3. Statement 1 is wrong: lyophobic particles carry charge and migrate to one electrode. Statements 2 and 3 are correct.
Teacher's Note: Statement 1 is wrong: lyophobic particles carry charge and migrate to one electrode. Statements 2 and 3 are correct.
Exam Note: Electro-osmosis: medium moves; lyophobic sols resemble medium in surface tension.
Brain Storming Question 2. Which of the following statements are correct? 1. The smaller the gold number of lyophobic colloid, the larger will be its protective power. 2. Lyophilic sols, in contrast to lyophobic sols are easily coagulated on addition of small amounts of electrolytes. 3. Ferric chloride solution is used to stop bleeding from a fresh cut because it coagulates the blood. 4. The flocculation value of arsenious sulphide sol is independent of the anion of the coagulating electrolyte. Codes: (a) 1, 2 and 3 (b) 1, 3 and 4 (c) 2, 3 and 4 (d) 1, 2 and 4
Solution. Corrected: statement 2 is false because lyophilic sols are not easily coagulated by small amounts of electrolyte; statements 1, 3 and 4 are true, so (b). (The printed key gives (a).) Gold number is a property of a lyophilic colloid. Answer: (b) 1, 3 and 4.
Teacher's Note: Statement 2 is false, since lyophilic sols resist small amounts of electrolyte; statements 1, 3, 4 are true.
Exam Note: Check each statement; lyophilic sols resist electrolytes.
Brain Storming Question 3. Match the List-I with List-II and select the correct answer using the codes given below the lists:
| List-I | List-II |
|---|---|
| A. Coagulation | 1. Scattering |
| B. Lyophilization | 2. Washing of precipitates |
| C. Peptization | 3. Purification of colloids |
| D. Tyndall effect | 4. Electrolyte |
| A | B | C | D | |
|---|---|---|---|---|
| (a) | 4 | - | 2 | 1 |
| (b) | 2 | - | 3 | 4 |
| (c) | - | 1 | 2 | 4 |
| (d) | 4 | 3 | 1 | - |
Solution. Answer (from key): (a): A-4, C-2, D-1.
Teacher's Note: Coagulation uses electrolyte, peptization uses washing of precipitate, Tyndall is scattering.
Exam Note: Match items one by one, then pick the code.
Brain Storming Question 4. The flocculating power of the given ions for the specified colloidal sols will be such that: Arsenic sulphide sol and Ferric hydroxide sol. (a) [Fe(CN)6]4- > PO43- > SO42- > Cl- (As2S3), Al3+ > Ba2+ > Na+ (Fe(OH)3) (b) Al3+ > Ba2+ > Na+ (As2S3), [Fe(CN)6]4- > PO43- > SO42- > Cl- (Fe(OH)3) (c) Na+ > Ba2+ > Al3+ (As2S3), Cl- > SO42- > PO43- > Fe(CN)64- (Fe(OH)3) (d) Cl- > SO42- > PO43- > [Fe(CN)6]4- (As2S3), Na+ > Ba2+ > Al3+ (Fe(OH)3)
Solution. Answer (from key): (b). As2S3 is negative so cations act (Al3+ best); Fe(OH)3 is positive so anions act ([Fe(CN)6]4- best).
Teacher's Note: As2S3 is negative so cations act (Al3+ best); Fe(OH)3 is positive so anions act ([Fe(CN)6]4- best).
Exam Note: Match ion sign to sol sign, then rank by charge.
Brain Storming Question 5. The coagulation value in millimoles per litre of electrolytes used for the coagulation of As2S3 are as below: I. NaCl = 52, II. KCl = 51, III. BaCl2 = 0.69, IV. MgSO4 = 0.22. The correct order of their flocculating power is: (a) I > II > III > IV (b) I > II > III = IV (c) IV > III > II > I (d) IV = III > II > I
Solution. Answer (from key): (c) IV > III > II > I. Flocculating power is the reciprocal of coagulation value: 0.22 (IV) < 0.69 (III) < 51 (II) < 52 (I), so IV > III > II > I.
Teacher's Note: Flocculating power is reciprocal of coagulation value; smallest value 0.22 (MgSO4) is strongest.
Exam Note: Smaller coagulation value means greater power.
Brain Storming Question 6. Cottrell precipitator works on the principle of: (a) distribution law (b) addition of electrolyte (c) neutralisation of charge on colloids (d) Le Chatelier's principle
Solution. Answer (from key): (c) neutralisation of charge on colloids. Smoke particles lose charge on contact with oppositely charged electrodes and settle.
Teacher's Note: Smoke particles lose charge on contact with oppositely charged electrodes and settle.
Exam Note: Cottrell: charge neutralisation at electrodes.
Brain Storming Question 7. The substances involved in micellization are: (a) polyphilic in nature (b) non-polar in nature (c) diphilic in nature (d) uniphilic in nature
Solution. Answer (from key): (c) diphilic in nature. Surfactants have both a polar head and a non-polar tail, so they are diphilic (amphiphilic).
Teacher's Note: Surfactants have both a polar head and a non-polar tail, so they are diphilic (amphiphilic).
Exam Note: Diphilic means polar head plus non-polar tail.
Brain Storming Question 8. The swelling of 'gel' when placed in water is called: (a) gelation (b) imbibition (c) thixotropy (d) syneresis
Solution. Answer (from key): (b) imbibition. Absorption of liquid with swelling by a gel is imbibition.
Teacher's Note: Absorption of liquid with swelling by a gel is imbibition.
Exam Note: Imbibition: gel swells; syneresis: gel shrinks.
Brain Storming Question 9. A lyophilic sol is at its isoelectric point then it is: (a) negatively charged (b) positively charged (c) not charged (d) none of these
Solution. Answer (from key): (c) not charged. At the isoelectric point the particles carry zero net charge.
Teacher's Note: At the isoelectric point the particles carry zero net charge.
Exam Note: Isoelectric point means net charge is zero.
Brain Storming Question 10. Sedimentation potential is reverse of: (a) electro-osmosis (b) electrophoresis (c) electrokinetic potential (d) streaming potential
Solution. Answer (from key): (b) electrophoresis. Sedimentation potential (Dorn effect) is the reverse of electrophoresis.
Teacher's Note: Sedimentation potential (Dorn effect) is the reverse of electrophoresis.
Exam Note: Dorn effect reverses electrophoresis.
Brain Storming Question 11. The potential difference between the fixed charged layer and the diffused layer having opposite charge is called: (a) zeta potential (b) colloidal potential (c) Dorn potential (d) streaming potential
Solution. Answer (from key): (a) zeta potential. This potential difference across the double layer is the zeta potential.
Teacher's Note: This potential difference across the double layer is the zeta potential.
Exam Note: Zeta potential across fixed and diffuse layers.
Brain Storming Question 12. Silver iodide is used for producing artificial rains because AgI: (a) is easy to spray at high altitude (b) is insoluble in water (c) is easy to synthesize (d) has crystals similar to ice
Solution. Corrected: AgI crystals resemble ice crystals and act as nuclei for rain, so (d). (The printed key gives (a).) Answer: (d) has crystals similar to ice.
Teacher's Note: AgI crystals resemble ice crystals and act as nuclei for rain, so (d). (The printed key gives (a).)
Exam Note: Structural similarity with ice nucleates raindrops.
Brain Storming Question 13. All colloidal solutions show: (a) very high osmotic pressure (b) high osmotic pressure (c) low osmotic pressure (d) no osmotic pressure
Solution. Answer (from key): (c) low osmotic pressure. Few large particles per unit volume give a low osmotic pressure.
Teacher's Note: Few large particles per unit volume give a low osmotic pressure.
Exam Note: Colligative properties are small for colloids.
Brain Storming Question 14. Colloidion is a colloidal solution of: (a) sucrose in water (b) cellulose in water (c) cellulose nitrate in water (d) cellulose nitrate in ethyl alcohol
Solution. Corrected: colloidion is cellulose nitrate dissolved in ethyl alcohol (with ether), so (d). (The printed key gives (c).) Answer: (d) cellulose nitrate in ethyl alcohol.
Teacher's Note: colloidion is cellulose nitrate dissolved in ethyl alcohol (with ether), so (d). (The printed key gives (c).)
Exam Note: Colloidion: cellulose nitrate in alcohol-ether.
Brain Storming Question 15. During micelle formation: (a) ΔH = +ve, ΔS = +ve (b) ΔH = -ve, ΔS = -ve (c) ΔH = -ve, ΔS = +ve (d) ΔH = +ve, ΔS = -ve
Solution. Answer (from key): (a) ΔH = +ve, ΔS = +ve. The key prints (a): micellisation is entropy driven, with positive ΔS and a small positive ΔH.
Teacher's Note: The key prints (a): micellisation is entropy driven, with positive ΔS and a small positive ΔH.
Exam Note: Micellisation is entropy driven.
Brain Storming Question 16. Which of the following is not the property of hydrophilic solutions? (a) High concentration of dispersed phase can be easily obtained (b) Coagulation is reversible (c) Viscosity and surface tension are nearly same as that of the medium (d) The charge of the particles depends on the pH of the medium and it may be positive, negative or zero
Solution. Answer (from key): (c) Viscosity and surface tension are nearly same as that of the medium. Hydrophilic sols have higher viscosity and lower surface tension than the medium.
Teacher's Note: Hydrophilic sols have higher viscosity and lower surface tension than the medium.
Exam Note: Hydrophilic: viscous, low surface tension.
Brain Storming Question 17. The coagulation of 100 mL of colloidal solution of gold is completely prevented by addition of 0.25 g of a substance "X" to it before addition of 1 mL of 10% NaCl solution. The gold number of "X" is: (a) 0.25 (b) 25 (c) 250 (d) 2.5
Solution. Answer (from key): (b) 25. Hint: mg of protective colloid per 10 mL of gold sol is the gold number. 0.25 g = 250 mg per 100 mL = 25 mg per 10 mL, so 25.
Teacher's Note: 0.25 g per 100 mL is 25 mg per 10 mL gold sol: gold number 25.
Exam Note: Scale to 10 mL of gold sol.
Brain Storming Question 18. Select the non-elastic gel of the following: (a) starch (b) agar-agar (c) silicic acid (d) gelatin
Solution. Answer (from key): (c) silicic acid. Silicic acid gel is rigid and non-elastic, unlike gelatin, agar and starch.
Teacher's Note: Silicic acid gel is rigid and non-elastic, unlike gelatin, agar and starch.
Exam Note: Silicic acid gel is brittle.
Brain Storming Question 19. The colligative properties of a colloidal solution compared to the solution of non-electrolyte of same concentration will be: (a) same (b) higher (c) lower (d) higher or lower
Solution. Answer (from key): (c) lower. Colloidal aggregates count as few particles, so colligative properties are lower.
Teacher's Note: Colloidal aggregates count as few particles, so colligative properties are lower.
Exam Note: Fewer particles, smaller colligative effects.
Brain Storming Question 20. 1 mole of AgI/Ag+ sol. is coagulated by: (a) 1 mole of KI (b) 500 mL of 1 M K2SO4 (c) 300 mL of 1 M Na3PO4 (d) 1 mole of AgI
Solution. Answer (from key): (a) 1 mole of KI. The key prints (a): the positive AgI/Ag+ sol is neutralised by 1 mol of I- from KI.
Teacher's Note: The key prints (a): the positive AgI/Ag+ sol is neutralised by 1 mol of I- from KI.
Exam Note: Opposite charge neutralises: iodide for Ag+ sol.
Brain Storming Question 21. Match the List-I (Colloidal dispersion) with List-II (Nature of dispersion) and select the correct answer using the codes given below the lists: (SCRA 2007) List-I: A. Milk, B. Clouds, C. Paints, D. Jellies. List-II: 1. Solid in liquid, 2. Liquid in gas, 3. Solids in solid, 4. Liquids in liquid, 5. Liquid in solid. (a) A-4, B-2, C-1, D-5 (b) A-1, B-5, C-3, D-2 (c) A-4, B-5, C-1, D-2 (d) A-1, B-2, C-3, D-5
Solution. Answer (from key): (a) A-4, B-2, C-1, D-5. Milk is liquid in liquid (4), cloud is liquid in gas (2), paint is solid in liquid (1), jelly is liquid in solid (5).
Teacher's Note: Milk: liquid in liquid; cloud: liquid in gas; paint: solid in liquid; jelly: liquid in solid.
Exam Note: Name dispersed phase and medium for each.
Brain Storming Question 22. At CMC, the surfactant molecules undergo: (a) association (b) aggregation (c) micelle formation (d) all of these
Solution. Answer (from key): (d) all of these. At CMC surfactant molecules associate and aggregate into micelles, so all three apply.
Teacher's Note: At CMC surfactant molecules associate and aggregate into micelles, so all three apply.
Exam Note: CMC: association, aggregation, micelle formation.
Brain Storming Question 23. The blue colour of the water of the sea is due to: (a) reflection of blue light by salts present in water (b) scattering of blue light by sol. particles (c) refraction of blue coloured light by the impurities present in seawater (d) absorption of radiation of different colours except blue light
Solution. Answer (from key): (b) scattering of blue light by sol. particles. Colloidal particles in seawater scatter blue light.
Teacher's Note: Colloidal particles in seawater scatter blue light.
Exam Note: Blue sea and sky: Tyndall scattering.
Brain Storming Question 24. Statement: To stop bleeding from an injury ferric chloride can be applied. Which comment about the statement is justified? [PMT (Kerala) 2008] (a) It is not true, ferric chloride is a poison (b) It is true, Fe3+ ions coagulate blood which is negatively charged sol (c) It is not true, Cl- ions form positively charged sol, profuse bleeding takes place (d) It is true, coagulation takes place because of formation of negatively charged sol with Cl- ions (e) It is not true, ferric chloride is ionic and gets into blood stream
Solution. Answer (from key): (b) It is true, Fe3+ ions coagulate blood which is negatively charged sol. Fe3+ neutralises the negative charge on blood particles and coagulates the blood.
Teacher's Note: Fe3+ neutralises the negative charge on blood particles and coagulates the blood.
Exam Note: Blood is negative sol; Fe3+ coagulates it.
Linked Comprehension Type Questions
Passage 1. There are certain substances which behave as normal, strong electrolytes at low concentration but at higher concentration they behave as colloidal solutions due to the formation of aggregated particles. Such colloids are called associated colloids and the aggregated particles are called micelles. Soaps and detergents are the examples of associated colloids. The formation of micelles takes place above certain concentration called critical micellization concentration (CMC) and a characteristic temperature.
Passage 1 Question 1. Micelles are: (a) emulsions cum gels (b) associated colloids (c) adsorbed catalysts (d) ideal solutions
Solution. Answer (from key): (b) associated colloids. The passage defines micelles as aggregated particles of associated colloids.
Teacher's Note: The passage defines micelles as aggregated particles of associated colloids.
Exam Note: Micelles are associated colloids.
Passage 1 Question 2. What type of molecules form micelles? (a) Non-polar molecules (b) Polar molecules (c) Surfactant molecules (d) Salt of weak acid and weak base
Solution. Answer (from key): (c) Surfactant molecules. Surfactant molecules with polar head and non-polar tail form micelles.
Teacher's Note: Surfactant molecules with polar head and non-polar tail form micelles.
Exam Note: Surfactants are amphiphilic.
Passage 1 Question 3. Micelles are formed only: (a) below the CMC and the Kraft temperature (b) above the CMC and below the Kraft temperature (c) above the CMC and above the Kraft temperature (d) below the CMC and above the Kraft temperature
Solution. Answer (from key): (c) above the CMC and above the Kraft temperature. Micelles need both concentration above CMC and temperature above the Kraft temperature.
Teacher's Note: Micelles need both concentration above CMC and temperature above the Kraft temperature.
Exam Note: Two conditions: concentration and temperature.
Passage 1 Question 4. Above CMC, the surfactant molecules undergo: (a) dissociation (b) aggregation (c) micelle formation (d) all of these
Solution. Answer (from key): (b) aggregation; (c) micelle formation. Above CMC the molecules aggregate and form micelles (key: b, c).
Teacher's Note: Above CMC the molecules aggregate and form micelles (key: b, c).
Exam Note: Aggregation and micelle formation occur above CMC.
Passage 1 Question 5. Micelles are used in: (a) detergents (b) magnetic separation (c) petroleum recovery (d) all of these
Solution. Answer (from key): (a) detergents; (c) petroleum recovery. The key prints (a, c): detergents and petroleum recovery.
Teacher's Note: The key prints (a, c): detergents and petroleum recovery.
Exam Note: Detergent action uses micelles.
Passage 2. Emulsions are also the colloidal solutions in which disperse phase as well as dispersion medium are liquids. It may be oil in water or water in oil type. Bancroft proposed that the phase in which the emulsifier is more soluble becomes the outer phase of the emulsion. Emulsifiers can be used to stabilize the emulsion. Soaps, detergents, proteins and gum, etc., are used as emulsifiers.
Passage 2 Question 1. Addition of lyophilic solution to the emulsion forms: (a) a protective film around the dispersed phase (b) a protective film around the dispersion medium (c) an aerosol (d) true solution
Solution. Answer (from key): (a) a protective film around the dispersed phase. The lyophilic colloid forms a protective film around dispersed droplets, stabilising the emulsion.
Teacher's Note: The lyophilic colloid forms a protective film around dispersed droplets, stabilising the emulsion.
Exam Note: Protective film surrounds dispersed phase.
Passage 2 Question 2. Which of the following examples is/are oil in water type emulsion? (a) Ink (b) Detergent (c) Soap (d) Milk
Solution. Answer (from key): (d) Milk. Milk is the oil-in-water emulsion in the list.
Teacher's Note: Milk is the oil-in-water emulsion in the list.
Exam Note: Milk is the standard O/W example.
Passage 2 Question 3. Emulsions can be destroyed by: (a) the addition of emulsifier which tends to form another emulsion (b) electrophoresis with high potential (c) freezing (d) all of the above
Solution. Answer (from key): (b) electrophoresis with high potential; (c) freezing. Electrophoresis at high potential and freezing break emulsions (key: b, c).
Teacher's Note: Electrophoresis at high potential and freezing break emulsions (key: b, c).
Exam Note: Emulsions break by charge removal or freezing.
Passage 2 Question 4. Which of the following is homogeneous? (a) Milk (b) Paint (c) Shampoo (d) None of these
Solution. Answer (from key): (d) None of these. Milk, paint and shampoo are all heterogeneous colloids, so none is homogeneous.
Teacher's Note: Milk, paint and shampoo are all heterogeneous colloids, so none is homogeneous.
Exam Note: Colloids are heterogeneous.
Passage 2 Question 5. Milk is an emulsion in which: (a) milk fat is dispersed in water (b) a solid is dispersed in water (c) a gas is dispersed in water (d) lactose is dispersed in water
Solution. Answer (from key): (a) milk fat is dispersed in water. Milk fat is dispersed in water, an O/W emulsion.
Teacher's Note: Milk fat is dispersed in water, an O/W emulsion.
Exam Note: Milk is fat in water.
Passage 3. The process of dialysis finds application in the purification of blood by artificial kidney. In this method, impure blood is introduced in the artificial kidney apparatus, where the waste material (electrolyte) diffuses through the membrane. The membrane used in the dialyser is different from the membrane used in osmosis. These membranes allow the movement of ions through them. Blood is a negatively charged sol. The haemoglobin particles carry a positive charge. Blood is slightly alkaline (pH 7.36-7.42). Acidic salts like alum and FeCl3 decrease the pH of the blood and the denaturation of globular proteins present in blood takes place. Due to denaturation, these globular proteins become fibrous which are insoluble and stop bleeding. Blood is lyophobic in nature.
Passage 3 Question 1. To stop bleeding, FeCl3 is applied locally because: (a) FeCl3 seals the blood vessels (b) FeCl3 changes the direction of blood flow (c) FeCl3 reacts with blood to form a solid substance which seals the blood vessel (d) FeCl3 causes denaturation of proteins present in blood
Solution. Answer (from key): (d) FeCl3 causes denaturation of proteins present in blood. Per the passage, FeCl3 lowers pH, denaturing the globular proteins into insoluble fibrous ones.
Teacher's Note: Per the passage, FeCl3 lowers pH, denaturing the globular proteins into insoluble fibrous ones.
Exam Note: Passage links FeCl3 action to protein denaturation.
Passage 3 Question 2. Which of the following colloidal solutions does not contain negatively charged particles? (a) Fe(OH)3 (b) As2S3 (c) Blood (d) Gold sol
Solution. Answer (from key): (a) Fe(OH)3. Fe(OH)3 sol is positive; the others are negative.
Teacher's Note: Fe(OH)3 sol is positive; the others are negative.
Exam Note: Hydroxide sols are positive.
Passage 3 Question 3. The coagulating power of an electrolyte for blood decreases in the order: (a) Na+, Al3+, Ba2+ (b) PO43-, SO42-, Cl- (c) Al3+, Ba2+, Na+ (d) Cl-, SO42-, PO43-
Solution. Answer (from key): (c) Al3+, Ba2+, Na+. Blood is negative, so cations coagulate it, with power rising with charge: Al3+ > Ba2+ > Na+.
Teacher's Note: Blood is negative, so cations coagulate it, with power rising with charge: Al3+ > Ba2+ > Na+.
Exam Note: Negative sol: coagulation power follows cation charge.
Passage 3 Question 4. Which of the following statements is/are not true? (a) Blood is positively charged sol (b) Soap solution contains ionic micelles as the colloidal particles (c) Blood is purified by the process of dialysis (d) Ca2+ and K+ cause coagulation of blood if added in excess
Solution. Answer (from key): (a) Blood is positively charged sol. Blood is a negative sol, so statement (a) is not true.
Teacher's Note: Blood is a negative sol, so statement (a) is not true.
Exam Note: Blood is negative; haemodialysis purifies it.
Passage 3 Question 5. Which of the following is/are lyophobic colloids? (a) Blood (b) Starch (c) Gelatin (d) Gold
Solution. Answer (from key): (a) Blood; (d) Gold. The passage states blood is lyophobic; gold is a lyophobic sol; starch and gelatin are lyophilic.
Teacher's Note: The passage states blood is lyophobic; gold is a lyophobic sol; starch and gelatin are lyophilic.
Exam Note: Metals and blood are lyophobic; starch, gelatin lyophilic.
Self Assessment: Assignment No. 6
Section I: Straight Objective Type Questions
Self Assessment Section I/II Question 1. Dispersed phase and dispersion medium in butter are respectively: [EAMCET (Medical) 2007] (a) solid and liquid (b) liquid and liquid (c) liquid and solid (d) solid and solid
Solution. Answer (from key): (b) liquid and liquid. Butter is a water-in-oil emulsion: liquid dispersed in liquid.
Teacher's Note: Butter is a water-in-oil emulsion: liquid dispersed in liquid.
Exam Note: Butter is W/O emulsion.
Self Assessment Section I/II Question 2. Which one of the following acts as the best coagulating agent for ferric hydroxide sol? [PMT (Kerala) 2007] (a) Magnesium chloride (b) Hydrochloric acid (c) Aluminium chloride (d) Potassium oxalate (e) Potassium ferricyanide
Solution. Answer (from key): (e) Potassium ferricyanide. Fe(OH)3 is positive, so the highest-charge anion, [Fe(CN)6]3-, is best.
Teacher's Note: Fe(OH)3 is positive, so the highest-charge anion, [Fe(CN)6]3-, is best.
Exam Note: Positive sol: pick highest-charge anion.
Self Assessment Section I/II Question 3. The colloidal sol found effective in the treatment of eye disease is: (a) colloidal sulphur (b) colloidal antimony (c) colloidal silver (d) colloidal gold
Solution. Answer (from key): (c) colloidal silver. Colloidal silver (argyrol) is used as an eye lotion.
Teacher's Note: Colloidal silver (argyrol) is used as an eye lotion.
Exam Note: Argyrol is silver sol.
Self Assessment Section I/II Question 4. When alcohol is added to the saturated solution of calcium acetate in water then we first of all get sol which changes to gelatinous mass called solid alcohol. Solid alcohol is......... (a) aerosol (b) gel (c) solid foam (d) solid sol
Solution. Answer (from key): (b) gel. The gelatinous mass is a gel (liquid dispersed in solid).
Teacher's Note: The gelatinous mass is a gel (liquid dispersed in solid).
Exam Note: Solid alcohol (canned heat) is a gel.
Self Assessment Section I/II Question 5. Colloidal solutions of gold prepared by different methods are of different colours because of: (a) variable valency of gold (b) impurities produced by different methods (c) different diameters of colloidal gold particles (d) different concentration of gold particles
Solution. Answer (from key): (c) different diameters of colloidal gold particles. Colour depends on particle size, so different diameters give different colours.
Teacher's Note: Colour depends on particle size, so different diameters give different colours.
Exam Note: Colour varies with particle size.
Self Assessment Section I/II Question 6. Emulsions of polyvinyl acetate are used in: (a) polishes (b) latex paints (c) fire works (d) rayons
Solution. Answer (from key): (b) latex paints. Polyvinyl acetate emulsions are used in latex paints.
Teacher's Note: Polyvinyl acetate emulsions are used in latex paints.
Exam Note: PVA emulsion paints.
Self Assessment Section I/II Question 7. The outcome of internal liquid of gel on shaking is called: (a) syneresis (b) imbibition (c) thixotropy (d) precipitation
Solution. Answer (from key): (c) thixotropy. Isothermal gel-to-sol conversion on shaking is thixotropy; syneresis is liquid exuding on standing.
Teacher's Note: Isothermal gel-to-sol conversion on shaking is thixotropy; syneresis is liquid exuding on standing.
Exam Note: Shaking liquefies gel: thixotropy.
Self Assessment Section I/II Question 8. Which of the following shows the maximum hydrophobic behaviour? (a) Adenine (b) Glucose (c) Stearic acid (d) Glycine
Solution. Corrected: stearic acid has a long non-polar hydrocarbon chain and is most hydrophobic; adenine, glucose and glycine are polar, so (c). (The printed key gives (a).) Answer: (c) Stearic acid.
Teacher's Note: stearic acid has a long non-polar hydrocarbon chain and is most hydrophobic; adenine, glucose and glycine are polar, so (c).
Exam Note: Long hydrocarbon chain means hydrophobic.
Self Assessment Section I/II Question 9. The solution of natural rubber in benzene is an example of: (a) lyophobic colloids (b) macromolecular colloid (c) multimolecular colloid (d) associated colloid
Solution. Answer (from key): (b) macromolecular colloid. Rubber is a natural macromolecule, so its solution is a macromolecular colloid.
Teacher's Note: Rubber is a natural macromolecule, so its solution is a macromolecular colloid.
Exam Note: Macromolecules form macromolecular colloids.
Self Assessment Section I/II Question 10. When NaCl solution is added to Fe(OH)3 sol then: (a) [Fe(OH)3]Fe3+ is formed (b) [Fe(OH)3]Cl- is formed (c) Fe(OH)3 is coagulated (d) [Fe(OH)3]Na+ is formed
Solution. Answer (from key): (c) Fe(OH)3 is coagulated. Cl- neutralises the positive charge on Fe(OH)3 particles, so the sol coagulates.
Teacher's Note: Cl- neutralises the positive charge on Fe(OH)3 particles, so the sol coagulates.
Exam Note: Electrolyte neutralises charge: coagulation.
Section II: Multiple Answers Type Objective Questions
Self Assessment Section I/II Question 11. Which of the following are lyophilic in nature? (a) Gum (b) Sulphur (c) Starch (d) Protein
Solution. Answer (from key): (a) Gum; (c) Starch; (d) Protein. Gum, starch and protein are lyophilic; sulphur sol is lyophobic.
Teacher's Note: Gum, starch and protein are lyophilic; sulphur sol is lyophobic.
Exam Note: Natural polymers are lyophilic.
Self Assessment Section I/II Question 12. Surfactant molecules form micelles in aqueous solution, which: (a) tend to congregate due to their hydrophobic tails (b) are colloidal-sized cluster of molecules (c) provide protection due to their hydrophilic head (d) none of the above
Solution. Answer (from key): (a) tend to congregate due to their hydrophobic tails; (b) are colloidal-sized cluster of molecules; (c) provide protection due to their hydrophilic head. Hydrophobic tails congregate inward, micelles are colloidal in size, and hydrophilic heads face water.
Teacher's Note: Hydrophobic tails congregate inward, micelles are colloidal in size, and hydrophilic heads face water.
Exam Note: Tails inside, heads outside.
Self Assessment Section I/II Question 13. Crystalloid and colloid differ with respect to: (a) Tyndall effect (b) particle size (c) diffusion through animal or vegetable membrane (d) number of particles per unit volume of solution
Solution. Answer (from key): (a) Tyndall effect; (b) particle size; (c) diffusion through animal or vegetable membrane. The key prints (a, b, c): crystalloids and colloids differ in Tyndall effect, particle size and membrane diffusion.
Teacher's Note: The key prints (a, b, c): crystalloids and colloids differ in Tyndall effect, particle size and membrane diffusion.
Exam Note: Compare size, Tyndall effect, diffusion.
Self Assessment Section I/II Question 14. Select the correct statements among the following: (a) Milk is emulsion of fat in water (b) An emulsifier stabilizes the emulsion (c) Emulsifier forms a thin film around the droplets of dispersed phase (d) Milk is an emulsion of protein in water
Solution. Answer (from key): (a) Milk is emulsion of fat in water; (b) An emulsifier stabilizes the emulsion; (c) Emulsifier forms a thin film around the droplets of dispersed phase. Milk is fat in water, and an emulsifier forms a film around droplets and stabilises them.
Teacher's Note: Milk is fat in water, and an emulsifier forms a film around droplets and stabilises them.
Exam Note: Milk contains fat droplets, not protein droplets.
Self Assessment Section I/II Question 15. Which of the following statements are true? (a) Flocculation value is inversely proportional to the coagulating power (b) Colloidal silica is a protective colloid (c) Alum is used for cleaning muddy water (d) Gelatin is added in ice cream, it acts as emulsifier
Solution. Answer (from key): (a) Flocculation value is inversely proportional to the coagulating power; (c) Alum is used for cleaning muddy water; (d) Gelatin is added in ice cream, it acts as emulsifier. The key prints (a, c, d): flocculation value is inversely related to coagulating power, alum clears muddy water and gelatin is added to ice cream.
Teacher's Note: Flocculation value is inversely related to coagulating power; alum clears muddy water; gelatin is added to ice cream.
Exam Note: Flocculation value and coagulating power are inverse.
Section III: Assertion-Reason Type Questions
Self Assessment Assertion-Reason Question 16. Statement-1: Micelles are formed by surfactant molecules above the critical micellar concentration (CMC).
Statement-2: The conductivity of solution having surfactant molecules decreases sharply at the CMC. (IIT 2007)
Solution. Answer (from key): (b), both statements true, but Statement 2 is not a correct explanation of Statement 1. Hint: micelles form above CMC, and each micelle contains at least 100 molecules, so conductivity decreases sharply at CMC; but Statement-2 does not explain Statement-1.
Teacher's Note: Micelles form above CMC and conductivity falls sharply there; Statement-2 does not explain Statement-1.
Exam Note: CMC: micelle formation; conductivity change is evidence, not cause.
Self Assessment Assertion-Reason Question 17. Statement-1: Aqueous gold colloidal solution is red in colour.
Statement-2: The colour arises due to scattering of light by colloidal gold particles.
Solution. Answer (from key): (b), both statements true, but Statement 2 is not a correct explanation of Statement 1. Both are true, but the colour of a gold sol depends on particle size; the statement given does not explain the red colour.
Teacher's Note: Gold sol colour depends on particle size; both statements are true but Statement-2 does not give the reason.
Exam Note: Colour depends on particle size.
Self Assessment Assertion-Reason Question 18. Statement-1: An emulsion becomes stable if soap is added to it.
Statement-2: Soap contains hydrophobic and hydrophilic parts.
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. Soap's two-part structure lets it form a film around droplets, stabilising the emulsion, so Statement-2 explains Statement-1.
Teacher's Note: Soap's two-part structure lets it form a film around droplets, stabilising the emulsion, so Statement-2 explains Statement-1.
Exam Note: Amphiphilic soap stabilises emulsions.
Self Assessment Assertion-Reason Question 19. Statement-1: Colloidal solutions are electrically neutral.
Statement-2: Dispersed phase and dispersion medium are of same charge.
Solution. Answer (from key): (c), Statement 1 true, Statement 2 false. The sol is neutral because dispersed phase and medium carry equal and opposite charges, so Statement-2 is false.
Teacher's Note: The sol is neutral because dispersed phase and medium carry equal and opposite charges, so Statement-2 is false.
Exam Note: Equal and opposite charges, not same.
Self Assessment Assertion-Reason Question 20. Statement-1: Colloidal sol scatter the beam of light while true solutions do not.
Statement-2: The particles in colloidal sol are bigger than those of true solutions.
Solution. Answer (from key): (a), Statement 1 true, Statement 2 true, and Statement 2 is a correct explanation of Statement 1. Larger colloidal particles scatter light, true-solution particles do not, so Statement-2 explains Statement-1.
Teacher's Note: Larger colloidal particles scatter light, true-solution particles do not, so Statement-2 explains Statement-1.
Exam Note: Scattering depends on particle size.
JEE Mathematics: OP Tandon Solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 6 The Colloidal State
Complete Math Solutions for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 6 The Colloidal State
Access the complete chapter-wise PDF for OP Tandon Solutions Physical Chemistry IIT JEE Chapter 6 The Colloidal State. These structured OP Tandon Solutions solutions for JEE Mathematics help students build foundational accuracy and prepare effectively for upcoming school evaluations.
Step-by-Step Mathematical Explanations
Beyond providing the final numerical answer, these guides break down the underlying mathematical principles. Cross-referencing completed work with these structured explanations helps eliminate calculation errors and reinforces conceptual clarity.
Complete Your JEE Exam Preparation
Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.
FAQs
They are chapter-wise solved questions from the OP Tandon book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.
Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.
Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.
Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.
Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.
They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.