MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 7 Aldehydes And Ketones Part 1

MS Chauhan Solutions for JEE Chemistry: Chapter 07 Aldehydes And Ketones

Explore reliable textbook solutions for Chapter 07 Aldehydes And Ketones tailored for JEE learners using MS Chauhan methodologies. Utilizing these Chemistry answers ensures thorough preparation and strengthens foundational knowledge before final school evaluations.

Practice JEE Chemistry Solutions: Chapter 07 Aldehydes And Ketones

Access the complete solution PDF for JEE Chemistry below. Regular practice with these targeted textbook answers builds familiarity with standard question patterns and helps secure higher marks in final school evaluations.

Chapter 7 Aldehydes And Ketones - Level 1, Questions 1 to 103

Level 1

Question 1. The ketone (aryl methyl ketone, CO–CH3) in a tetralin ring system carrying a chloro group, a nitro group para to the Cl, and a 1,3-dioxolane (ethylene ketal) on the ring ketone, is treated with N2H4/KOH/H2O (Wolff–Kishner reduction). Major product A is: (a) ethyl-substituted compound with OH in place of Cl, ketal retained, NO2 retained; (b) ethyl compound with Cl retained, ketal retained; (c) ethyl compound with Cl retained and ketal hydrolysed to the ring C=O; (d) ethyl compound with OH in place of Cl and free ring C=O.

Solution. Answer (from key): (a). COCH3 is reduced to CH2CH3; the ketal is stable to base, so it survives; the strongly basic hot KOH replaces Cl (para to NO2) by OH through nucleophilic aromatic substitution.

Teacher's Note: Wolff–Kishner is basic: ketals survive, and a Cl para to NO2 is displaced by OH.

Exam Note: Check every group's stability in base.

Question 2. Ar–CO–CH3 (aryl ring also carrying CH2CH2N+Me3) is converted to Ar–CH2CH3 with the ammonium group unchanged. This conversion can be achieved by: (a) Wolff–Kishner reduction (b) Clemmensen reduction (c) LiAlH4 (d) NaBH4.

Solution. Answer (from key): (b). Strong base in Wolff–Kishner would cause Hofmann elimination of the β-phenylethyl trimethylammonium group; LiAlH4 and NaBH4 give only the alcohol. Clemmensen (Zn–Hg/HCl) is acidic and leaves the ammonium salt intact.

Teacher's Note: Quaternary ammonium with β-H plus strong base eliminates; so choose acidic Clemmensen.

Exam Note: Match reducing method to substrate sensitivity.

Question 3. CH3–CO–CH2CH2–CH(–O–)CH2 (a ketone carrying an epoxide) is converted to CH3(CH2)3–CH(–O–)CH2 (epoxide intact, C=O reduced to CH2). This can be achieved by: (a) Wolff–Kishner reduction (b) Clemmensen reduction (c) HS–CH2CH2–SH followed by Raney Ni (d) None of these.

Solution. Answer (from key): (d). The epoxide is opened by acid (Clemmensen), by hydrazine/base (Wolff–Kishner), and by the thiol nucleophile/Lewis acid conditions, so none of the listed methods keeps the epoxide intact.

Teacher's Note: Epoxides are ring-opened by acids, nucleophiles and bases, so every listed method fails.

Exam Note: Check the ring-sensitive group before choosing a reagent.

Question 4. 3-Nitroacetophenone is treated with Zn(Hg)/HCl. The product of the Clemmensen reduction is: (a) 3-nitroethylbenzene (b) 1-(3-nitrophenyl)ethanol (c) 3-ethylaniline (d) 2-(3-nitrophenyl)ethanol.

Solution. Answer (from key): (c). Zn(Hg)/HCl reduces C=O to CH2 and also reduces the aromatic NO2 group to NH2, giving 3-ethylaniline.

Teacher's Note: Zn/HCl is a strong reductant that converts Ar–NO2 to Ar–NH2 too.

Exam Note: Remember nitro reduction accompanies Clemmensen.

Question 5. CH3–CH(OH)–CH2CH2–CO–CH3 is converted to CH3–CH(OH)–(CH2)3–CH3. This can be achieved by: (a) Wolff–Kishner reduction (b) Clemmensen reduction (c) LiAlH4 (d) NaBH4.

Solution. Answer (from key): (a). Only the C=O must become CH2 with the secondary alcohol untouched; the basic Wolff–Kishner does this, whereas acidic Clemmensen would convert the alcohol to chloride/alkene, and hydrides only give diols.

Teacher's Note: Alcohols survive base-mediated Wolff–Kishner but not acidic Clemmensen.

Exam Note: State why the –OH group fixes the choice of method.

Question 6. 3-(4-Hydroxycyclohexyl)acetophenone (a benzene ring bearing COCH3 and, meta to it, a 4-hydroxycyclohexyl group) is treated with (i) Zn(Hg)/HCl giving A and (ii) NH2NH2/HO–, Δ giving B. Candidate products (all with ethyl in place of COCH3): P has OH on the cyclohexane ring, Q has Cl on the cyclohexane ring, R has Cl on a cyclohexene ring (ring C=C). Identify A and B: (a) A=P, B=Q (b) A=Q, B=R (c) A=Q, B=P (d) A=R, B=P.

Solution. Answer (from key): (c). Clemmensen (HCl) reduces C=O and converts the secondary alcohol to the chloride (A = Q); Wolff–Kishner reduces C=O only, so the alcohol stays (B = P).

Teacher's Note: HCl in Clemmensen replaces –OH by Cl; basic Wolff–Kishner leaves –OH untouched.

Exam Note: Compare the two reductions' side reactions.

Question 7. 3-Acetyl-cyclopentanol (a cyclopentane ring bearing OH and COCH3, 1,3-related) is treated with Zn(Hg)/HCl to give A. Identify A: (a) 3-ethylcyclopentanol (OH retained) (b) 1-chloro-3-ethylcyclopentane (OH replaced by Cl) (c) a chloro-ethyl-methyl-substituted cyclopentane (d) an isomeric ethyl-cyclopentanol with OH and ethyl on adjacent carbons.

Solution. Answer (from key): (b). Clemmensen reduction converts COCH3 into CH2CH3, and under conc. HCl the secondary alcohol is converted into the chloride, so the product is 1-chloro-3-ethylcyclopentane.

Teacher's Note: Zn(Hg)/HCl reduces C=O and also swaps secondary –OH for Cl.

Exam Note: Write both changes: C=O to CH2, OH to Cl.

Question 8. 4-(2-Bromoethyl)acetophenone is heated with N2H4/HO– (Wolff–Kishner). Product A is: (a) 4-ethylphenethyl alcohol (b) 1-ethyl-4-vinylbenzene (c) 1-(2-bromoethyl)-4-ethylbenzene (d) 1-(1-bromoethyl)-4-ethylbenzene.

Solution. Answer (from key): (b). COCH3 is reduced to ethyl; the strong base then causes E2 dehydrohalogenation of the CH2CH2Br group to give a styrene-type vinyl group (benzylic H is acidic, so elimination is easy).

Teacher's Note: Strong base plus a β-hydrogen and a good leaving group gives elimination to a conjugated alkene.

Exam Note: Look for halides when base and heat are used.

Question 9. A cyclohexane ring carrying a spiro 1,3-dioxolane (ketal) and a CH2COCH3 chain is converted to the same compound with the chain reduced to n-propyl (CH2CH2CH3), ketal intact. The conversion is carried out by: (a) Clemmensen reduction (b) Wolff–Kishner reduction (c) LiAlH4 (d) NaBH4.

Solution. Answer (from key): (b). C=O is changed into CH2 without touching the acid-sensitive ketal, so basic Wolff–Kishner is used (Clemmensen's HCl would hydrolyse the ketal; hydrides give alcohol).

Teacher's Note: Ketals hydrolyse in acid, so a CH2 conversion needs basic Wolff–Kishner.

Exam Note: Acid-sensitive protecting group means use Wolff–Kishner.

Question 10. Increasing order of equilibrium constants for formation of a hydrate for four substituted 1-tetralones: (I) with NH2 on the ring para to the C=O (conjugated), (II) NH2 on the ring meta to the C=O, (III) unsubstituted, (IV) NO2 para-type on the ring. (a) IV < III < II < I (b) IV < III < I < II (c) I < II < III < IV (d) II < III < I < IV.

Solution. Answer (from key): (c). Hydration is favoured by electron-withdrawing groups (they raise the carbonyl's electrophilicity) and disfavoured by electron donors. NH2 para (resonance donor) lowers K most (I), meta NH2 less (II), H (III), NO2 highest (IV): I < II < III < IV.

Teacher's Note: EWG raises carbonyl electrophilicity and Khyd; resonance donors lower it.

Exam Note: Rank substituents by electron-donating or withdrawing power.

Question 11. Ph–C≡C–C6H4–OCH3(p) is treated with HgSO4/dil. H2SO4. Major product A is: (a) Ph–CO–CH2–C6H4OMe (b) Ph–C(OH)–CH2–C6H4OMe (carbinol-type structure with OH on the carbon next to Ph) (c) Ph–CH2–CO–C6H4OMe (d) Ph–CH2–CH(OH)–C6H4OMe.

Solution. Answer (from key): (c). Water attacks the alkyne carbon that better stabilises the developing positive charge, i.e. the carbon attached to the p-methoxyphenyl ring; the enol so formed tautomerises to the ketone PhCH2–CO–C6H4OMe.

Teacher's Note: Markovnikov hydration places C=O on the alkyne carbon bearing the stronger electron-donating aryl group.

Exam Note: Say which aryl stabilises the cation.

Question 12. A spiro cyclopropane-1,3-dioxane-4,6-dione with an acetonide (two methyl groups at C-2), i.e. a spiro Meldrum's acid derivative, is hydrolysed with H2O. Predict the product A: (a) a six-membered lactone bearing CO2H and CH3 (b) 2-oxocyclopentane-carboxylic acid (c) a γ-lactone (five-membered lactone) bearing an α-CO2H (d) a γ-lactone with CO2H at the β-position.

Solution. Answer (from key): (c). Hydrolysis gives the cyclopropane-1,1-dicarboxylic acid system, which loses acetone; the strained cyclopropane then undergoes ring-opening lactonisation to the γ-butyrolactone carrying a carboxylic acid at C-α.

Teacher's Note: Meldrum's-acid type spiro cyclopropanes open under hydrolysis to lactones; acetone is lost.

Exam Note: Name acetone as by-product; track the lactone ring size.

Question 13. cis/trans-Cyclohexane-1,2,4-triol (three OH groups, two adjacent) is converted to the hydroxy-ketone in which only the isolated OH at C-4 has become C=O. This can be achieved by: (a) Me2CO/H+, H3O+, KMnO4/HO– (b) Me2CO/H+, KMnO4, H3O+ (c) KMnO4/NaIO4, Me2CO/H+, H3O+ (d) KMnO4/NaIO4, H3O+, Me2CO/H+.

Solution. Answer (from key): (b). Protect the cis 1,2-diol as the acetonide (Me2CO/H+), oxidise the free secondary OH to C=O with KMnO4, then deprotect with H3O+. The order protect, oxidise, deprotect is essential.

Teacher's Note: Protect adjacent diol as acetonide, oxidise the free alcohol, then deprotect.

Exam Note: Give the three steps in correct order.

Question 14. The enol ether CH3CH=CH–O–C(CH3)=CH2 is treated with H3O+ to give A + B. Compounds A and B can be differentiated by: (a) 2,4-DNP (b) Fehling solution (c) Lucas reagent (d) NaHSO3.

Solution. Answer (from key): (b). Hydrolysis of the divinyl-type ether gives propanal (CH3CH2CHO) and acetone. Both react with 2,4-DNP and NaHSO3, but only the aldehyde reduces Fehling solution.

Teacher's Note: Both products are carbonyls; only the aldehyde gives a positive Fehling test.

Exam Note: Aldehyde vs ketone: Fehling or Tollens test.

Question 15. Trimethyl orthoformate, HC(OMe)3, reacts with tetrahydropyran-4-one in the presence of H2O, H+ catalyst at 20 °C for 15 min to give A + methyl formate (HCOOMe). Product A is: (a) the hemiketal (OH, OMe) (b) the dimethyl ketal (two OMe) (c) OMe and Me at C-4 (d) two Me groups at C-4.

Solution. Answer (from key): (b). Orthoformate converts the ketone to the dimethyl ketal and is itself converted to methyl formate; the water consumed is trapped by the orthoformate, which drives the equilibrium.

Teacher's Note: Orthoformate acts as acetalising agent and water scavenger, giving dimethyl ketal.

Exam Note: Name the by-product methyl formate and the ketal.

Question 16. Cyclohexanone → bicyclic fused cyclopentenone (hydrindenone with C=C at ring junction, C=O in five-membered ring) through three steps P, Q, R. Reagents P, Q, R respectively are: (a) CH2=CH–CH2Br/HO–, HO–/Δ, Wacker process (b) CH2=CH–CH2Br/HO–, Wacker process, HO–/Δ (c) Wacker process, CH2=CH–CH2Br/HO–, HO–/Δ (d) Wacker process, HO–/Δ, CH2=CH–CH2Br/HO–.

Solution. Answer (from key): (b). Step P: α-allylation with allyl bromide/base gives 2-allylcyclohexanone. Q: Wacker oxidation converts the terminal alkene into CH2COCH3, a 1,4-diketone. R: base-induced intramolecular aldol condensation with heating gives the fused cyclopentenone.

Teacher's Note: Allylation, Wacker oxidation, then intramolecular aldol builds the five-membered enone.

Exam Note: Sequence matters: 1,4-diketone cyclises to cyclopentenone.

Question 17. 2-R-Cyclohexanone is treated with magnesium monoperoxyphthalate (MMPP), a Baeyer–Villiger rearrangement of an unsymmetrical ketone. Identify the major product: (a) six-membered lactone with R on carbon not adjacent to O (b) seven-membered lactone with R on the carbon attached to ring O (c) six-membered lactone with R on the ring carbon next to C=O (d) α-hydroxy ketone.

Solution. Answer (from key): (b). In Baeyer–Villiger oxidation the more substituted (better cation-stabilising) α-carbon migrates, so oxygen is inserted between C=O and CHR; the product is the ε-caprolactone with R on the carbon next to the ring oxygen.

Teacher's Note: Migratory aptitude: tertiary > secondary > primary, so O goes between C=O and the more substituted carbon.

Exam Note: Name the migrating group to earn the marks.

Question 18. 2-Methoxytetrahydrofuran and tetrahydrofuran-2-ol (2-hydroxytetrahydrofuran) can be differentiated by the following reagent: (a) 2,4-DNP (Brady's reagent) (b) Tollens' reagent (c) Lucas reagent (d) NaHSO3.

Solution. Answer (from key): (b). 2-Hydroxytetrahydrofuran is a cyclic hemiacetal in equilibrium with the open-chain hydroxy-aldehyde (4-hydroxybutanal), so it gives silver mirror with Tollens' reagent; the acetal (2-methoxy compound) is stable in base and does not.

Teacher's Note: Hemiacetals open to free aldehydes; acetals are stable to Tollens' base.

Exam Note: Hemiacetal vs acetal: Tollens or Fehling.

Question 19. 2-(Hydroxymethyl)cyclohexanol is treated successively with PCC (excess) to give A, ethylene glycol (1 equivalent)/H+ to give B, CH3MgBr then H3O+ to give C, and NaBH4 to give D. Product D is: (a) 1-(2-hydroxycyclohexyl)ethanol (b) 1-methyl-2-(hydroxymethyl)cyclohexan-1-ol (c) an isomer with the methyl on a different carbon (d) 1-methylcyclohexane-1,2-diol.

Solution. Answer (from key): (b). PCC oxidises both OH groups: A = 2-oxocyclohexane-carbaldehyde. One equivalent of glycol protects the more reactive aldehyde as the acetal (B). CH3MgBr adds to the ketone (tertiary alcohol), H3O+ frees the aldehyde (C), and NaBH4 reduces it to CH2OH, giving D = 2-(hydroxymethyl)-1-methylcyclohexanol.

Teacher's Note: Aldehyde is protected first (more reactive than ketone), so Grignard attacks the ketone only.

Exam Note: Show the protect, add, deprotect, reduce sequence.

Question 20. CH3CH=CH2 is converted by (i) BH3·THF then H2O2/HO– to P and then PCC/CH2Cl2 to Q; and (ii) Hg(OAc)2/H2O then NaBH4/HO– to R and then PCC/CH2Cl2 to S. Relationship between products Q and S is: (a) positional isomer (b) chain isomer (c) stereoisomer (d) functional isomer.

Solution. Answer (from key): (d). Hydroboration–oxidation (anti-Markovnikov) gives propan-1-ol (P), oxidised by PCC to propanal (Q). Oxymercuration–demercuration (Markovnikov) gives propan-2-ol (R), oxidised to acetone (S). Propanal and acetone (C3H6O) are functional isomers.

Teacher's Note: Anti-Markovnikov gives aldehyde, Markovnikov gives ketone: functional isomers with same formula.

Exam Note: Identify P, Q, R, S before naming the isomerism.

Question 21. Cyclopentanone is treated with (1) Al(Hg), benzene, heat; (2) H2O, heat to give X. The product X is: (a) 2,2'-bi(cyclopentanone) (b) 1,1'-dihydroxy-bi(cyclopentyl) (c) bi(cyclopentenyl) (d) 2-cyclopentylidene-cyclopentanone.

Solution. Answer (from key): (b). Al(Hg) is a one-electron reductant that couples two ketone molecules (pinacol coupling) to give the 1,2-diol, [1,1'-bi(cyclopentane)]-1,1'-diol.

Teacher's Note: Metal-mediated bimolecular ketone reduction (Mg/Hg or Al/Hg) gives a pinacol.

Exam Note: Name the reaction: pinacol coupling.

Question 22. Rank in order of increasing equilibrium constant for hydration, Khyd (smallest first): 1 = cyclobutanone, 2 = cyclopropanone, 3 = di-tert-butyl ketone, (CH3)3C–CO–C(CH3)3. (a) 1 < 2 < 3 (b) 3 < 1 < 2 (c) 2 < 1 < 3 (d) 2 < 3 < 1.

Solution. Answer (from key): (b). Hydration converts sp2 C=O to sp3, relieving angle strain: cyclopropanone (highest strain) has the largest K, cyclobutanone is next, while the very hindered di-tert-butyl ketone has the smallest. Order: 3 < 1 < 2.

Teacher's Note: Ring strain (sp2 to sp3 relief) raises Khyd; bulky groups lower it.

Exam Note: Argue with strain relief and steric hindrance.

Question 23. A cyclohexanone ring spiro-fused to a 1,3-oxathiolane (O,S-ketal) on another carbon is converted to the corresponding compound in which the ring C=O has become CH2, oxathiolane intact. This can be achieved by: (a) Zn(Hg), HCl (b) NH2–NH2/KOH/Δ (c) LiAlH4 (d) H2/Ni.

Solution. Answer (from key): (b). Wolff–Kishner reduction is carried out in base, so the oxathiolane ketal survives. Clemmensen's acid would cleave the ketal and H2/Ni would desulphurise it; LiAlH4 would only give the alcohol.

Teacher's Note: Base-stable ketal survives Wolff–Kishner; Raney or H2/Ni attacks the C–S bond.

Exam Note: Link protecting group stability to reagent choice.

Question 24. Which sequence represents the best synthesis of hexanal, CH3CH2CH2CH2CH2CHO? (a) 1. CH3CH2CH2CH2Br + NaC≡CH; 2. H2O, H2SO4, HgSO4 (b) 1. CH3CH2CH2CH=CH2 + CH3COOH; 2. CH3MgBr, ether; 3. H3O+; 4. PCC, CH2Cl2 (c) 1. CH3CH2CH2CH2COCH3; 2. CH3COOH; 3. LiAlH4; 4. H2O; 5. PCC, CH2Cl2 (d) 1. CH3CH2CH2CH2MgBr + ethylene oxide; 2. H3O+; 3. PCC, CH2Cl2.

Solution. Answer (from key): (d). n-Butyl magnesium bromide opens ethylene oxide to give, after H3O+, hexan-1-ol (two carbons added). PCC then stops at the aldehyde, hexanal. Option (a) gives a methyl ketone (2-hexanone-type) by hydration of a terminal alkyne.

Teacher's Note: Grignard plus ethylene oxide adds CH2CH2OH; PCC stops oxidation at aldehyde.

Exam Note: Count carbons: C4 plus ethylene oxide gives C6.

Question 25. Cyclohexanone is treated with HNO3 to give A, then Ca(OH)2 (and heating) to give B. Product B is: (a) cyclobutanone (b) cyclopropanone (c) cyclopentanone (d) cycloheptanone.

Solution. Answer (from key): (c). Oxidation with HNO3 cleaves the ring to adipic acid (A). Its calcium salt on pyrolysis (Ca(OH)2, heat) undergoes ketonic decarboxylation, giving cyclopentanone and CaCO3.

Teacher's Note: Adipic acid calcium salt gives cyclopentanone; five- and six-membered rings form best.

Exam Note: Name adipic acid as intermediate A.

Question 26. The open-chain pentitol-type compound (Fischer projection: CH2OH, HO–C–H, H–C–OH, H–C–OH, CH2OH) is converted to its cyclic benzylidene acetal (CH–Ph bridging the oxygens of C-2 and C-3 positions as shown). Compound X in the reaction is: (a) PhCOCH3 (b) PhCHO (c) PhCH2CHO (d) PhCH2COCH3.

Solution. Answer (from key): (b). A cyclic acetal with a CH–Ph bridge arises from a polyol and benzaldehyde (PhCHO, usually with acid catalyst) with loss of water; a ketone would give a ketal with a quaternary carbon.

Teacher's Note: Acetal carbon bearing H and Ph comes from benzaldehyde plus two –OH groups.

Exam Note: Identify the carbonyl from the acetal carbon's substituents.

Question 27. Ph–CO–CH3 reacts with NaNO2/HCl to give A, with Ac2O/heat to give B and with H3O+ to give C. Product C is: (a) Ph–CO2H (b) Ph–CO–CO2H (c) Ph–CO–CO–H (d) Ph–CO–CH2OH.

Solution. Answer (from key): (b). HNO2 nitrosates the active methyl group to give the α-oximino ketone PhCOCH=NOH (A); Ac2O dehydrates the aldoxime to the nitrile PhCOCN (B); acid hydrolysis converts the nitrile into the acid, benzoylformic (phenylglyoxylic) acid, PhCOCO2H (C).

Teacher's Note: Oxime to nitrile (dehydration) to acid (hydrolysis) gives the α-keto acid.

Exam Note: Write A, B, C structures stepwise.

Question 28. Benzene reacts with HCHO/2HCl to give A, which reacts with AgNO2 to give B. Product B is: (a) Ph–CH2–NO2 (b) Ph–CH2–ONO (c) Ph–CHO (d) Ph–O–N=O.

Solution. Answer (from key): (a). Blanc chloromethylation gives benzyl chloride (A). Ionic AgNO2 (covalent Ag–N bond, attack through N) gives the nitroalkane PhCH2NO2 as the major product (NaNO2/KNO2 would give nitrite esters).

Teacher's Note: AgNO2 attacks via N, giving nitroalkanes; KNO2 attacks via O, giving nitrites.

Exam Note: State the ambident nature of the nitrite ion.

Question 29. Butyrophenone, PhCO–CH2CH2CH3, is treated with Br2 (0.75 mole %, 100 %), AlCl3/Et2O. Bromination occurs not in the benzene ring. Product A is: (a) Ph–CO–CH2–CHBr–CH3 (β-bromo) (b) Ph–CO–CHBr–CH2CH3 (α-bromo) (c) Ph–CO–CH2CH2CH2Br (γ-bromo) (d) a β-bromo isomer drawn with the Br on the carbon two atoms from C=O and a terminal CH3.

Solution. Answer (from key): (b). Under acid/Lewis-acid catalysis the ketone enolises and Br2 attacks the enol at the α-carbon, giving α-bromobutyrophenone, PhCO–CHBr–CH2CH3.

Teacher's Note: Acid-catalysed halogenation of ketones occurs at the α-carbon through the enol.

Exam Note: Say 'via enol' to earn the mark.

Question 30. A compound A, C6H12O3, gives a positive iodoform test and a negative Tollens test; on treatment with H2O and a drop of H2SO4 it gives a positive Tollens test. Compound A is: (a) CH3–CO–CH(OCH3)–CH2OCH3 (b) CH3–CO–C(OCH3)2–CH3 (c) CH3–CO–CH2–CH(OCH3)2 (d) HCO–CH2CH2–CH(OCH3)2.

Solution. Answer (from key): (c). The CH3CO– group gives the iodoform test; the dimethyl acetal masks the aldehyde, so Tollens is negative. Acid hydrolysis releases CH3COCH2CHO (3-oxobutanal), which gives a positive Tollens test. Formula C6H12O3 checks.

Teacher's Note: Acetal hides the aldehyde from Tollens; acid hydrolysis unmasks it.

Exam Note: Match each test with the group responsible.

Question 31. C16H16 (A) on ozonolysis gives B (C8H8O); B on treatment with NH2NH2/HO–, Δ gives ethylbenzene. Reactant A is: (a) Ph2C=C(CH3)2 (b) the isomer of PhC(CH3)=C(CH3)Ph with the two Ph groups on the same side (c) the isomer of PhC(CH3)=C(CH3)Ph with the Ph groups on opposite sides (d) both (b) and (c).

Solution. Answer (from key): (d). B (C8H8O) that gives ethylbenzene on Wolff–Kishner is acetophenone. Ozonolysis of PhC(CH3)=C(CH3)Ph (C16H16) gives two molecules of acetophenone; both cis and trans isomers do so, whereas (a) would give benzophenone and acetone.

Teacher's Note: Work backwards: ethylbenzene gives acetophenone, so alkene is symmetrical 2,3-diphenylbut-2-ene (both geometric isomers).

Exam Note: Mention both cis and trans isomers.

Question 32. 1-Methylcyclohexyl hydroperoxide (1-methyl-1-cyclohexyl hydrogen peroxide) is treated with H3O+ to give P (C7H14O2), which gives positive iodoform, positive 2,4-DNP and positive CrO3 tests. Compound P is: (a) CH3CO(CH2)3CH(OH)CH3 (b) CH3COCH2CH(OH)CH2CH2CH3 (c) CH3CO(CH2)4CH2OH (d) CH3COCH(CH3)C(OH)(CH3)2.

Solution. Answer (from key): (c). Acid causes Hock-type rearrangement: ring carbon migrates to oxygen, the ring opens and the oxocarbenium ion is hydrolysed to give CH3–CO–(CH2)4–CH2OH (6-hydroxyhexan-2-one, C7H14O2). It has CH3CO– (iodoform), C=O (2,4-DNP) and a primary alcohol (CrO3).

Teacher's Note: Acid-catalysed hydroperoxide rearrangement (Hock) gives ketone plus alcohol by ring opening.

Exam Note: Match each test to a functional group.

Question 33. Correct order of reactivity of the following towards Grignard reagent: (I) CH3CHO, (II) HCHO, (III) CH3COPh. (a) I > II > III (b) II > I > III (c) II > III > I (d) I > III > II.

Solution. Answer (from key): (b). Formaldehyde has no alkyl group (least steric hindrance, most electrophilic), acetaldehyde has one electron-donating CH3, and acetophenone is a hindered ketone also conjugated with the ring: II > I > III.

Teacher's Note: Nucleophilic addition: fewer, smaller and less donating groups on C=O means higher reactivity.

Exam Note: Give steric and electronic reasons together.

Question 34. CH3–CH(OH)–CH(CH2Ph)–CH2OH reacts with HCHO/TsOH, Δ (93 %) to give A. Product A is: (a) 5-phenyl-4-methyl-1,3-dioxane (b) 5-benzyl-4-methyl-1,3-dioxane (c) 5-(1-phenylethyl)-1,3-dioxane (d) 4-phenyl-5-methyl-1,3-dioxane.

Solution. Answer (from key): (b). The substrate is a 1,3-diol (OH on C-1 and C-3 of the butane chain); formaldehyde forms a six-membered cyclic acetal (1,3-dioxane) in which the CH3 and CH2Ph substituents stay on the carbons of the former diol: 5-benzyl-4-methyl-1,3-dioxane.

Teacher's Note: 1,3-Diols with aldehydes give six-membered cyclic acetals (1,3-dioxanes).

Exam Note: Locate the 1,3-diol first.

Question 35. (CH3)3C–O–CO–CH2CH2–CH(OH)–Ar (Ar = ring carrying I, OCH3 and O–CH2CH2CH3) is treated with KOH/H2O, Δ. Total number of products obtained is: (a) 2 (b) 3 (c) 4 (d) 5.

Solution. Answer (from key): (a). Only the tert-butyl ester undergoes base hydrolysis, giving the carboxylate salt (hydroxy-acid salt) and tert-butyl alcohol: two products. The aryl iodide, aryl ethers and secondary alcohol do not react.

Teacher's Note: Only the ester hydrolyses; aryl halide and aryl ethers are inert to aqueous KOH.

Exam Note: Identify the single reactive group.

Question 36. What reagent and/or reaction conditions would you choose to bring about the conversion of benzaldehyde ethylene acetal (2-phenyl-1,3-dioxolane) into PhCHO + HOCH2CH2OH? (a) 1. LiAlH4, 2. H2O (b) H2O, H2SO4, heat (c) H2O, NaOH, heat (d) PCC, CH2Cl2.

Solution. Answer (from key): (b). Acetals are cleaved by aqueous acid (hydrolysis, reverse of formation) but are stable to bases, hydrides and PCC.

Teacher's Note: Acetals are acid-labile and base-stable; hydrolysis needs aqueous acid.

Exam Note: Acetal hydrolysis: aqueous acid.

Question 37. Cyclohexanone is treated with excess MeI and excess KH, giving 81 % yield. Product is: (a) 2,6-dimethylcyclohexanone (b) 2,2,6-trimethylcyclohexanone (c) 2,2,6,6-tetramethylcyclohexanone (d) 3,5-dimethylcyclohexanone.

Solution. Answer (from key): (c). Excess KH forms the enolate repeatedly and excess MeI alkylates each α-position until no α-hydrogens remain, giving 2,2,6,6-tetramethylcyclohexanone.

Teacher's Note: Excess base and MeI methylates all four α-hydrogens, ending with gem-dimethyl on both sides.

Exam Note: Count α-hydrogens: four are replaced.

Question 38. 4-Hydroxycyclohexyl cyclohexylmethyl ketone, HO–C6H10–CO–CH2–C6H11, is converted to HO–C6H10–CH2–CH2–C6H11. The reduction can be best carried out by: (a) Clemmensen reduction (b) Wolff–Kishner reduction (c) NaBH4 (d) none of these.

Solution. Corrected: (b), Wolff–Kishner reduction. The key printed (d), but the task is C=O to CH2 with the alcohol kept: Clemmensen (HCl) would convert the OH into Cl and NaBH4 only gives an alcohol, while the basic Wolff–Kishner reduces C=O to CH2 and leaves the C–OH untouched.

Teacher's Note: Alcohol survives base-mediated Wolff–Kishner, not acidic Clemmensen.

Exam Note: Link the –OH group to reagent choice.

Question 39. CH3C≡CH reacts with (i) HgSO4/dil. H2SO4 to give A and (ii) BH3·THF then H2O2/HO– to give B. A and B are differentiated by: (a) 2,4-DNP (b) NaOI (c) Na metal (d) NaHSO3.

Solution. Answer (from key): (b). A = acetone (Markovnikov hydration), B = propanal (hydroboration–oxidation). Acetone has the CH3CO– group and gives yellow iodoform (CHI3) with NaOI; propanal does not. Both react with 2,4-DNP and NaHSO3; neither reacts with Na.

Teacher's Note: Methyl ketone gives iodoform; propanal lacks CH3CO– group.

Exam Note: Identify A and B first, then choose the test.

Question 40. Cyclopentanone reacts with HCN to give A, then LiAlH4 to give B, then NaNO2/HCl to give C. End product C is: (a) cyclohexanone (b) 2-methylcyclopentanone (c) 3-methylcyclopentanone (d) 1-(hydroxymethyl)cyclopentanol.

Solution. Answer (from key): (a). HCN gives the cyanohydrin (A), LiAlH4 reduces C≡N to CH2NH2 giving 1-(aminomethyl)cyclopentanol (B). Diazotisation with NaNO2/HCl followed by ring expansion (Tiffeneau–Demjanov) gives cyclohexanone.

Teacher's Note: Tiffeneau–Demjanov: β-amino alcohol plus HNO2 gives ring-expanded ketone (one carbon larger).

Exam Note: Name Tiffeneau–Demjanov ring expansion.

Question 41. Compound X, C4H8O, reacts with 2,4-DNP derivative and gives a negative haloform test: (a) CH3COCH2CH3 (b) (CH3)2CH–CHO (c) cyclobutanol (d) CH3CH2CH(OH)CH3.

Solution. Answer (from key): (b). Reaction with 2,4-DNP shows a carbonyl compound (rules out the alcohols (c) and (d)). Butanone (a) has CH3CO– and gives the haloform test, so X is isobutyraldehyde, (CH3)2CHCHO.

Teacher's Note: 2,4-DNP positive means C=O; haloform negative excludes methyl ketones, leaving the aldehyde.

Exam Note: Eliminate by each test in turn.

Question 42. When a nucleophile encounters a ketone, the site of attack is: (a) the carbon atom of the carbonyl (b) the oxygen atom of the carbonyl (c) both carbon and oxygen with equal probability (d) no attack occurs as ketones do not react with nucleophiles.

Solution. Answer (from key): (a). The carbonyl carbon carries partial positive charge (Cδ+=Oδ–), so nucleophiles attack the carbon.

Teacher's Note: C=O is polarised; carbon is electrophilic, oxygen is nucleophilic.

Exam Note: State the polarity of the C=O bond.

Question 43. Correct order of rate of reaction toward nucleophilic addition: (a) 4-nitrobenzaldehyde (b) benzaldehyde (c) 4-methoxybenzaldehyde (d) butan-2-one, CH3COEt (e) benzophenone, Ph2C=O. (a) a > b > c > d > e (b) a > b > d > c > e (c) a > d > e > b > c (d) a > b > e > d > c.

Solution. Answer (from key): (a). Aldehydes are more reactive than ketones. Among aldehydes, the p-NO2 group (electron-withdrawing) increases electrophilicity and p-OMe (electron-donating) decreases it: a > b > c. Among ketones, the dialkyl ketone d is more reactive than the doubly conjugated, hindered benzophenone e.

Teacher's Note: Aldehyde > ketone; EWG raises and EDG lowers rate; conjugation and bulk slow benzophenone.

Exam Note: Order by aldehyde vs ketone first.

Question 44. The structure tetrahydropyran-2-ol (a six-membered ring with ring O and an OH on the carbon adjacent to the O) would be best classified as a(n): (a) acetal (b) hemiacetal (c) hydrate (d) cyanohydrin.

Solution. Answer (from key): (b). The carbon bearing both OH and ring O–R is a hemiacetal carbon (cyclic hemiacetal).

Teacher's Note: Hemiacetal carbon has one OH and one OR; acetal has two OR.

Exam Note: Count OH and OR groups on the carbon.

Question 45. Which of the following pairs of reactants is most effective in forming an enamine? (a) CH3CH2CHO + [(CH3)2CH]2NH (b) cyclohexanone + (CH3)2NH (c) (CH3)3CCHO + (CH3)2NH (d) none of these form an enamine.

Solution. Answer (from key): (b). Enamine formation needs a secondary amine and a carbonyl compound with an α-hydrogen. (c) has no α-H; in (a) the very bulky diisopropylamine hinders addition; cyclohexanone with dimethylamine works well.

Teacher's Note: Need α-H plus an unhindered secondary amine; tertiary-butyl aldehyde lacks α-H.

Exam Note: Check α-H and amine type before answering.

Question 46. The reaction of C6H5CH=CHCHO with LiAlH4 gives: (a) C6H5CH2CH2CH2OH (b) C6H5CH=CHCH2OH (c) C6H5CH2CH2CHO (d) C6H5CH2CHOHCH3.

Solution. Corrected: (b), C6H5CH=CHCH2OH (cinnamyl alcohol). The key printed (a), but the standard result of LiAlH4 reduction of cinnamaldehyde is 1,2-reduction of C=O to the allylic alcohol; the isolated-type C=C of a conjugated system is not normally reduced under the usual conditions (a mixture with some saturated alcohol may form only in forced conditions).

Teacher's Note: LiAlH4 reduces C=O (1,2-addition) and normally leaves a conjugated C=C intact.

Exam Note: Say C=C is not reduced by hydride.

Question 47. Tetrahydrofuran-3-one (five-membered ring with ring O and a C=O at C-3) is treated with NaBH4 to give A, then H+/Δ to give B. Product B is: (a) tetrahydrofuran-3-ol (b) a dihydrofuran with a C=C double bond in the ring (c) tetrahydrofuran (d) an enol (hydroxy-dihydrofuran).

Solution. Answer (from key): (b). NaBH4 reduces the ketone to the secondary alcohol (A, tetrahydrofuran-3-ol); acid and heat then dehydrate it to the alkene, a 2,3-dihydrofuran-type ring alkene (B).

Teacher's Note: Hydride gives alcohol; acid plus heat dehydrates alcohol to alkene.

Exam Note: Two-step: reduce, then dehydrate.

Question 48. Which of the following compound is a hemiacetal? (a) 1-methoxycyclohexan-1-ol (OH and OMe on the same ring carbon) (b) tetrahydropyran-2-ol (c) oxiran-2-ol (epoxide ring carbon bearing an OH) (d) all of these.

Solution. Answer (from key): (d). Each compound has a carbon bearing both an OH group and an OR (ether-type) oxygen (OMe in (a), ring O in (b) and (c)), which is the hemiacetal arrangement.

Teacher's Note: Hemiacetal: one carbon attached to –OH and –OR; ring or open-chain both count.

Exam Note: Define hemiacetal before choosing.

Question 49. Ph–CH2–C≡N is treated with LDA/THF and then CH3I (71 %). The end product will be: (a) Ph–CH2CH2NH2 (b) Ph–CH2–NH2 (c) Ph–CH(CH3)–C≡N (d) Ph–CH=C=N–CH3.

Solution. Answer (from key): (c). LDA removes the acidic benzylic α-hydrogen (stabilised by Ph and CN) to give a carbanion that is alkylated by CH3I, giving 2-phenylpropanenitrile.

Teacher's Note: α-H of a nitrile bearing aryl is acidic; LDA forms the carbanion for SN2 alkylation.

Exam Note: Show the carbanion step.

Question 50. PhCH=CH–CO–CH3 is converted to PhCH=CH–CO2H. Can be achieved by: (a) KMnO4, Δ followed by H+ (b) I2/NaOH followed by H+ (c) H2/Pt (d) LiAlH4.

Solution. Answer (from key): (b). The methyl ketone undergoes the iodoform reaction (I2/NaOH), converting COCH3 to COO– (with CHI3); acidification gives the acid and the C=C is untouched. KMnO4 would cleave the double bond.

Teacher's Note: Haloform converts CH3CO– to COOH without touching C=C.

Exam Note: Mention CHI3 as by-product.

Question 51. 3,4-(Methylenedioxy)phenol, a benzene ring bearing OH and a fused –O–CH2–O– bridge, reacts with H3O+. Product(s) of the reaction is/are: (a) 1,2,4-trihydroxybenzene (b) 1,2,3-trihydroxybenzene (c) HCHO (d) both (a) and (c).

Solution. Answer (from key): (d). The methylenedioxy group is a cyclic acetal of formaldehyde with a catechol; acid hydrolysis gives HCHO and the catechol, which here is 1,2,4-benzenetriol (together with the original OH).

Teacher's Note: Methylenedioxy is a formaldehyde acetal of catechol; acid releases HCHO and the diol.

Exam Note: Identify the acetal part first.

Question 52. Cyclohexanone is treated with SeO2 to give A. Product A is: (a) 2-hydroxycyclohexanone (b) cyclohexane-1,2-dione (c) cyclohex-2-enone (d) cyclopentane-1,2-dione.

Solution. Answer (from key): (b). SeO2 (Riley oxidation) oxidises the α-CH2 of a ketone to C=O, giving the 1,2-diketone, cyclohexane-1,2-dione.

Teacher's Note: Riley oxidation: SeO2 oxidises α-methylene of ketones to give 1,2-dicarbonyls.

Exam Note: Name reagent and α-position.

Question 53. A cyclohexanone ring bearing CH3CO– (COCH3) and CH3 on the same α-carbon (2-acetyl-2-methylcyclohexanone) is treated with Br2 + NaOH, Δ to give A + CHBr3; A with H+, Δ gives C. Product C is: (a) 3-methylcyclohexanone (b) 2-methylcyclohexanone (c) 2-bromo-2-methylcyclohexanone (d) 2-(tribromomethyl)cyclohexanone.

Solution. Answer (from key): (b). The haloform reaction converts COCH3 into COO– (A = salt of 1-methyl-2-oxocyclohexane-carboxylic acid) and CHBr3. This β-keto acid readily decarboxylates on acidification and heating to give 2-methylcyclohexanone.

Teacher's Note: Haloform gives acid; β-keto acid loses CO2 on heating giving the simple ketone.

Exam Note: Name haloform then decarboxylation.

Question 54. A molecule containing two ethylene ketal groups (CH3CH2–C(ketal)–CH2–C(ketal)–CH3) is hydrolysed with H3O+ to A + 2 glycol. Product A is: (a) CH3CH2COCH2COCH2CH3 (b) CH3CH2COCH2CH2COCH3 (c) CH3CH2COCH2COCH3 (d) CH3COCH2COCH3.

Solution. Answer (from key): (c). Acid hydrolysis removes both ketals, releasing two ethylene glycol molecules and restoring the two C=O groups in the skeleton CH3CH2–C–CH2–C–CH3: hexane-2,4-dione (propionyl-acetone).

Teacher's Note: Ketal hydrolysis regenerates carbonyls at the same carbons; count carbons in the skeleton.

Exam Note: Read the carbon skeleton from the ketal diagram.

Question 55. R–CHO + R–NH2 gives R–CH=N–R (imine). This reaction gives best yield at: (a) pH 1–2 (b) pH 4–5 (c) pH 10–11 (d) pH 13–14.

Solution. Answer (from key): (b). Imine formation needs mild acid: enough H+ to catalyse dehydration of the carbinolamine, but not so much that the amine is fully protonated (non-nucleophilic). The optimum is pH about 4–5.

Teacher's Note: Too acidic protonates the amine; too basic fails to protonate the carbinolamine OH.

Exam Note: Give the pH 4–5 bell-curve explanation.

Question 56. An aromatic compound A, C8H10O, on reaction with iodine and dilute NaOH gives a yellow precipitate. Expected structure: (a) PhCO–CH3 (b) C6H5CH(OH)CH3 (c) 4-CH3–C6H4–CH2OH (d) a dimethylphenol (two CH3 and one OH on the ring).

Solution. Answer (from key): (b). The iodoform test needs CH3CO– or CH3CH(OH)– . 1-Phenylethanol, C8H10O, is oxidised by NaOI to acetophenone and gives iodoform. Acetophenone (a) is C8H8O, not C8H10O.

Teacher's Note: Check the formula before the test: only 1-phenylethanol matches C8H10O and CH3CH(OH)–.

Exam Note: Use molecular formula to eliminate (a).

Question 57. Compound A (molecular formula C3H8O) is treated with acidified potassium dichromate to form a product B. B forms a shining silver mirror on warming with ammoniacal silver nitrate. B, when treated with an aqueous solution of NH2NHCONH2 and sodium acetate, gives product C. Identify the structure of C: (a) CH3CH2CH=NNHCONH2 (b) (CH3)2C=NNHCONH2 (c) (CH3)2C=NCONHNH2 (d) CH3CH2CH=NCONHNH2.

Solution. Answer (from key): (a). A is propan-1-ol; K2Cr2O7 oxidises it to propanal (B, Tollens-positive); propanal condenses with semicarbazide (NH2NHCONH2, reacting through the terminal NH2 of the hydrazine part) to give the semicarbazone CH3CH2CH=NNHCONH2.

Teacher's Note: Silver mirror means aldehyde, so A is a primary alcohol; semicarbazone forms via the hydrazine NH2.

Exam Note: Write A, B, C stepwise.

Question 58. In the reaction CH3CHO + HCN → CH3CH(OH)CN → (H–OH) → CH3CH(OH)COOH, the acid obtained will be: (a) D-isomer (b) L-isomer (c) (80 % D + 20 % L) mixture (d) (50 % D + 50 % L) mixture.

Solution. Answer (from key): (d). The planar C=O is attacked by CN– from either face with equal probability, so the new stereocentre forms as a racemic mixture, and hydrolysis does not touch it: 50 % D + 50 % L lactic acid.

Teacher's Note: Achiral reagents attack a planar carbonyl equally from both faces, giving a racemate.

Exam Note: Say 'racemic, optically inactive'.

Question 59. CH3CH2Cl reacts with NaCN to give (i), then Ni/H2 to give (ii), then acetic anhydride to give (iii). Product (iii) is: (a) CH3CH2CH2NH2 (b) CH3CH2CH2CONHCH3 (c) CH3CH2CH2NHCOCH3 (d) CH3CH2CH2CONHCOCH3.

Solution. Answer (from key): (c). NaCN gives propanenitrile CH3CH2CN (i); H2/Ni reduces it to propylamine (ii); acetic anhydride acetylates the amine to give N-propylacetamide, CH3CH2CH2NHCOCH3 (iii).

Teacher's Note: Nitrile adds one carbon; reduction gives primary amine; anhydride gives amide.

Exam Note: Track carbon count and functional group at each step.

Question 60. Piperonal (3,4-methylenedioxybenzaldehyde) is treated with KMnO4/H2O, Δ and then H3O+ to give G. Product G is: (a) 3,4-methylenedioxybenzoic acid (b) 3-(hydroxymethyl)-4-hydroxybenzoic acid (c) 3,4-dihydroxybenzoic acid (d) 3,4-epoxybenzaldehyde-type compound (ring-fused epoxide with CHO).

Solution. Answer (from key): (c). KMnO4 oxidises CHO to COOH and the subsequent H3O+ hydrolyses the cyclic formaldehyde acetal (methylenedioxy) to the catechol, giving 3,4-dihydroxybenzoic acid (protocatechuic acid) and HCHO.

Teacher's Note: Oxidise CHO to COOH; acid then opens the methylenedioxy acetal to catechol.

Exam Note: Two steps: oxidation, then acetal hydrolysis.

Question 61. Carbonyl compounds can generally be converted to hydrocarbons by: (a) H2/Pt (b) LiAlH4 (c) N2H4–KOH/Δ (d) K2Cr2O7–H2SO4.

Solution. Answer (from key): (c). Wolff–Kishner reduction (N2H4, KOH, heat) converts C=O into CH2. H2/Pt and LiAlH4 give alcohols and dichromate oxidises.

Teacher's Note: C=O to CH2 needs Wolff–Kishner or Clemmensen; hydrides stop at alcohol.

Exam Note: Name both hydrocarbon-forming reductions.

Question 62. 1-Ethylcyclopentene is treated with (1) O3; (2) Ag2O; (3) NaBH4; (4) H+ to give A. Product A is: (a) 6-ethyltetrahydropyran-2-one (δ-lactone, Et on the carbon next to ring O) (b) 5-ethyl-tetrahydropyran-2-one (c) 4-ethylcyclohexanone-type ketone (d) 3-ethylcyclohexanone-type ketone.

Solution. Answer (from key): (a). Ozonolysis gives CH3CH2CO(CH2)3CHO; Ag2O oxidises CHO to COOH; NaBH4 reduces the ketone to the secondary alcohol, giving 5-hydroxyheptanoic acid. Acid then closes the six-membered lactone: 6-ethyltetrahydropyran-2-one.

Teacher's Note: Ozonolysis opens the ring; hydroxy acid with 5-OH closes to a six-membered lactone.

Exam Note: Name hydroxy acid and lactonisation.

Question 63. Which statement about the aldol condensation is correct? (a) A Lewis acid is commonly used as a catalyst (b) The initial step is probably the formation of a carbanion (c) A Lewis base is employed to induce carbocation formation (d) The carbon chain is lengthened through the elimination of 1 mole of water.

Solution. Answer (from key): (b). In base-catalysed aldol reaction the first step is removal of an α-hydrogen to give a resonance-stabilised carbanion (enolate). (d) is wrong because water is eliminated in the dehydration step, not for chain lengthening.

Teacher's Note: Aldol starts with enolate (carbanion) formation; C–C bond forms by addition, not by loss of water.

Exam Note: State the first step: enolate formation.

Question 64. A compound gives a positive test with I2/NaOH and is extracted from benzene by saturated NaHSO3. It may be: (a) CH3(CH2)4CHO (b) CH3(CH2)3COCH3 (c) CH3CH2COCH2CH3 (d) CH3(CH2)4CH2OH.

Solution. Answer (from key): (b). Extraction by NaHSO3 needs an aldehyde or an unhindered methyl ketone (bisulphite adduct); a positive iodoform test needs CH3CO–. Only hexan-2-one fits both; hexanal gives no iodoform and pentan-3-one has no CH3CO–.

Teacher's Note: Bisulphite adducts form with aldehydes and methyl ketones; iodoform needs CH3CO–.

Exam Note: Apply both tests to eliminate options.

Question 65. Which of the following compounds on reaction with excess CH3MgBr and subsequent hydrolysis will give a tertiary alcohol? (a) C2H5CHO (b) C2H5CO2CH3 (c) C2H5COOH (d) 2,3-epoxybutane, CH3CH–CHCH3 with an O bridge (an epoxide).

Solution. Answer (from key): (b). An ester reacts with two moles of Grignard reagent: the first gives a ketone (with loss of MeO–), the second gives the tertiary alcohol, 3-methylpentan-3-ol. Aldehyde gives a secondary alcohol; the acid is only deprotonated; the epoxide gives a primary or secondary alcohol.

Teacher's Note: Esters add two equivalents of RMgX: ketone intermediate then tertiary alcohol.

Exam Note: Identify product type for each option.

Question 66. A + B → acetophenone oxime (the C=N–OH on the carbon bearing CH3 and Ph). Reactants A and B are: (a) PhCH2CHO + NH2OH (b) PhCHO + NH2OH (c) PhCOCH3 + NH2NH2 (d) PhCOCH3 + NH2OH.

Solution. Answer (from key): (d). An oxime R2C=N–OH forms from a carbonyl compound and hydroxylamine; the carbon bears CH3 and Ph, so the carbonyl is acetophenone.

Teacher's Note: Oxime from ketone plus hydroxylamine; read substituents on the C=N carbon.

Exam Note: Reverse the C=N to find the ketone.

Question 67. CH3COOH is treated with Ca(OH)2, then heat, to give A. Product A is: (a) propanal (b) propanone (acetone) (c) propan-2-ol (d) propan-1-ol.

Solution. Answer (from key): (b). Acetic acid and Ca(OH)2 give calcium acetate, which on dry distillation (heat) undergoes ketonic decarboxylation to acetone and CaCO3.

Teacher's Note: Calcium salt of carboxylic acid on heating gives ketone plus CaCO3.

Exam Note: Give the equation: (CH3COO)2Ca to CH3COCH3.

Question 68. Which of the following does not form a stable hydrate on addition of H2O? (a) PhCOCOCOPh (b) ninhydrin precursor, indane-1,2,3-trione (c) cyclopropanone (d) cyclohexanone.

Solution. Answer (from key): (d). Hydrates are stable when the carbonyl is strongly electron-poor (adjacent C=O groups in (a) and (b)) or strained (cyclopropanone, (c)). Cyclohexanone is not strained and Khyd is small, so its hydrate is not stable.

Teacher's Note: Stable hydrates need adjacent EWG or ring strain; cyclohexanone has neither.

Exam Note: Explain with strain relief and EWG.

Question 69. Ketone A reacts with (1) C2H5MgBr, (2) H2O to give B; B with H2SO4, heat (–H2O) gives C; C with (1) O3, (2) Zn, H2O gives pentan-3-one (diethyl ketone) + acetaldehyde. The ketone A is: (a) 3-methylbutan-2-one-type branched ketone (b) pentan-3-one (c) pentan-2-one (d) a branched four-carbon ketone drawn with C=O on a branch.

Solution. Answer (from key): (b). Ozonolysis products pentan-3-one + CH3CHO come from (C2H5)2C=CHCH3. This alkene arises by dehydration of the tertiary alcohol (C2H5)3C–OH (B), which is made from ketone A + C2H5MgBr, so A is diethyl ketone, pentan-3-one.

Teacher's Note: Work backwards: ozonolysis, dehydration, Grignard addition reverse to the ketone.

Exam Note: Show each reverse step.

Question 70. Cyclopentadiene + CH3COCH3 with EtONa/EtOH, heat gives X. Product X is: (a) 2,2-di(cyclopentadienyl)propane (b) a cyclopentadienyl tertiary alcohol (aldol-type adduct) (c) 6,6-dimethylfulvene (cyclopentadiene ring with exocyclic =C(CH3)2) (d) a 2,2-bis(cyclopentenyl)propane.

Solution. Answer (from key): (c). The acidic CH2 of cyclopentadiene (pKa about 16) is deprotonated, the anion adds to acetone, and dehydration gives the fulvene, 6,6-dimethylfulvene.

Teacher's Note: Cyclopentadienyl anion adds to C=O; loss of water gives fulvene (Thiele condensation).

Exam Note: Name the condensation product: fulvene.

Question 71. The conversion of acetophenone into benzoic acid can be achieved by its reaction with: (a) sodium hydroxide followed by acidification (b) iodine and sodium hydroxide, followed by acidification (c) hydroxylamine followed by reaction with H2SO4 (d) m-chloroperoxybenzoic acid.

Solution. Answer (from key): (b). The iodoform (haloform) reaction converts PhCOCH3 into PhCOO– + CHI3; acidification gives benzoic acid. Hydroxylamine/H2SO4 gives Beckmann product (acetanilide); mCPBA gives phenyl acetate.

Teacher's Note: Haloform converts methyl ketones to carboxylic acid with one carbon fewer.

Exam Note: Compare with Beckmann and Baeyer–Villiger products.

Question 72. In which of the following compounds are the methylenic hydrogens the most acidic? (a) CH3COCH2CH3 (b) CH3CH2COOC2H5 (c) CH3CH2CH(COOC2H5)2 (d) CH3COCH2CN.

Solution. Answer (from key): (d). The CH2 in CH3COCH2CN lies between two strong electron-withdrawing groups (C=O and C≡N), so its anion is highly stabilised by resonance. In (c) the acidic hydrogen is a methine CH, and (a), (b) have only one weaker EWG.

Teacher's Note: Two strongly withdrawing groups (CO and CN) on one CH2 give the most stable carbanion.

Exam Note: Count EWGs flanking the CH2.

Question 73. Cyclopentanone reacts with NH2OH/H+. The major product is: (a) 1-hydroxy-1-(hydroxyamino)cyclopentane (carbinolamine) (b) 1-hydroxy-1-(aminooxy)cyclopentane (c) 1-ethoxy-cyclopentanol (d) cyclopentanone oxime.

Solution. Answer (from key): (d). Addition of NH2OH through nitrogen gives the carbinolamine, which under acid dehydrates to the stable oxime, C=N–OH (cyclopentanone oxime).

Teacher's Note: Addition then elimination of water gives the C=N bond of the oxime.

Exam Note: State: addition-elimination via carbinolamine.

Question 74. PhCOOH reacts with SOCl2 to give A, then H2/Pd–BaSO4 to give B. Product B is: (a) PhCHO (b) PhCH2OH (c) PhCH2Cl (d) PhCH=CH2.

Solution. Answer (from key): (a). SOCl2 gives benzoyl chloride (A). Rosenmund reduction (H2, Pd–BaSO4, poisoned catalyst) stops at the aldehyde, benzaldehyde.

Teacher's Note: Poisoned Pd/BaSO4 stops acid chloride reduction at the aldehyde stage.

Exam Note: Name the Rosenmund reduction.

Question 75. The presence of unsaturation in organic compounds can be tested with: (a) Schiff's reagent (b) Tollens' reagent (c) Fehling's reagent (d) Baeyer's reagent.

Solution. Answer (from key): (d). Baeyer's reagent (cold dilute alkaline KMnO4) is decolourised by C=C and C≡C bonds. Schiff's, Tollens' and Fehling's reagents test for aldehyde groups.

Teacher's Note: Baeyer's reagent (alkaline KMnO4) loses its purple colour with C=C; others test aldehydes.

Exam Note: Pink/purple colour disappears with unsaturation.

Question 76. Which of the following gives the iodoform test? (a) CH3CH2OH (b) C2H5CHO (c) (CH2OH)2 (d) None of these.

Solution. Answer (from key): (a). Ethanol is oxidised by NaOI to acetaldehyde, which has CH3CO–, and gives iodoform. Propanal (b) and ethylene glycol (c) have no CH3CO– or CH3CH(OH)– group.

Teacher's Note: Only ethanol is the primary alcohol that forms CH3CHO and gives iodoform.

Exam Note: Ethanol is the only alcohol that passes.

Question 77. Which of the following β-keto carboxylic acids does not undergo decarboxylation on heating? (a) a bicyclo[2.2.1]heptan-2-one carrying CO2H on the bridgehead carbon next to C=O (b) a bicyclic keto acid with CO2H on a non-bridgehead carbon next to C=O (c) a bicyclic keto acid with CO2H and COCH3/Br substituents (d) none of these.

Solution. Answer (from key): (a). β-Keto acids decarboxylate through an enol whose C=C forms at the carbon that carried CO2H. In (a) that carbon is a bridgehead of a small bicyclic ring, so the enol would violate Bredt's rule and decarboxylation does not occur.

Teacher's Note: Decarboxylation needs an enol double bond at the former CO2H carbon; bridgehead alkene breaks Bredt's rule.

Exam Note: Bredt's rule explains the answer.

Question 78. HOCH2CH2CH2–CO–OCH2CH3 reacts with PCC to give A; with H2C=CHMgBr (1 molar equivalent) to give B; with NH4Cl/H2O to give C; with KOH/H2O, then H3O+; and with (CH3CO)2O/pyridine to give D. Product D is: (a) CH2=CH–CH(OCOCH3)–CH2CH2–COOH (b) CH2=CH–CH2–C(OH)–CO2H (c) CH2=CH–C(OH)–CH2CH2–CO–O–CO–CH3 (d) CH2=CH–CH2–CH(OH)–CH2–COOH.

Solution. Answer (from key): (a). PCC oxidises the primary alcohol to the aldehyde OHC–CH2CH2–COOEt (A). One equivalent of vinylmagnesium bromide adds to the more reactive aldehyde, not the ester, giving the allylic alcohol (B, C after NH4Cl). KOH hydrolyses the ester to the carboxylate, acid gives the carboxylic acid, and Ac2O/pyridine acetylates the secondary OH, giving D.

Teacher's Note: Aldehyde is much more reactive than ester toward one equivalent of Grignard reagent.

Exam Note: Follow selectivity: aldehyde first, ester later.

Question 79. The compound shown ((S)- or (R)-2-hydroxy-pentan-3-one-type α-hydroxy ketone with stereocentre bearing H and OH next to C=O) undergoes racemisation on reaction with aqueous acid. Which structure best represents the intermediate responsible for this process? (a) enol with C=C toward the far side, OH at the other carbon (b) a stereo-defined hydrate-type drawing (c) the enol (or enediol) with C=C at the former stereocentre, i.e. C(OH)=C(OH)- planar arrangement (d) the stereo-defined gem-diol (hydrate) drawing.

Solution. Answer (from key): (c). Acid catalyses enolisation toward the stereocentre, giving a planar enol/enediol (C=C at the carbon that was chiral). Loss of stereochemical information occurs there, and re-ketonisation gives both configurations equally: racemisation.

Teacher's Note: Racemisation of α-chiral ketones goes via a planar enol at the stereocentre.

Exam Note: Show enol formation at the chiral carbon.

Question 80. (CH3O)2CHCH2CH2CH2Br reacts with Mg, then H2C=O, then H3O+, heat. The final product is: (a) CH3OCO–CH2CH2CH2CH2OH (b) CH3CO–CH2CH2CH2CH2OH (c) HCO–CH2CH2CH2CH2OH (d) HCO–CH2CH2CH2CHO.

Solution. Answer (from key): (c). The dimethyl acetal is inert to Mg, so the Grignard reagent forms and adds to HCHO, giving (MeO)2CH(CH2)4OH after protonation. Hot aqueous acid then hydrolyses the acetal to the aldehyde, giving 5-hydroxypentanal.

Teacher's Note: Acetal protects the aldehyde from the Grignard; HCHO adds one CH2OH carbon.

Exam Note: Count carbons: C4 chain plus HCHO gives C5.

Question 81. The amino ketone 2-(2-aminopropyl)acetophenone (benzene ring with COCH3 and, ortho to it, CH2CH(NH2)CH3) undergoes spontaneous cyclisation on standing. The major product of this intramolecular reaction is: (a) a naphthalenone-type ring ketone (b) a dihydroisoquinoline with N at a different position (c) an enamine-amino ring (d) 1,3-dimethyl-3,4-dihydroisoquinoline (cyclic imine).

Solution. Answer (from key): (d). The NH2 group attacks the ketone C=O intramolecularly and loses water to give a six-membered cyclic imine (C=N conjugated with the benzene ring): 1,3-dimethyl-3,4-dihydroisoquinoline.

Teacher's Note: Intramolecular imine formation closes a six-membered ring, which is favoured.

Exam Note: Count ring atoms to justify the six-membered ring.

Question 82. Compound A (C6H12O) is optically active, gives a negative Tollens test and a positive test with 2,4-DNP. Identify A: (a) CH3COCH2CH(CH3)2 (b) CH3COCH(CH3)CH2CH3 (c) OHC–CH2CH(CH3)CH2CH3 (d) CH3CO(CH2)3CH3.

Solution. Answer (from key): (b). A is a ketone (positive 2,4-DNP, negative Tollens). Optical activity needs a chiral carbon bonded to four different groups: only 3-methylpentan-2-one has one (CH with CH3, H, C2H5 and COCH3). (c) is chiral but is an aldehyde.

Teacher's Note: Ketone (Tollens negative) plus a stereocentre with four different groups.

Exam Note: Check chirality for each ketone.

Question 83. The enamine from 4-methylpiperidine and cyclohexanone reacts with 1-nitropropene (CH3CH=CH–NO2) in (1) Et2O, (2) H3O+ to give A (99 %). Product A is: (a) ring–C(CH3)2–CH2NO2 type (quaternary carbon) (b) 2-(1-methyl-2-nitroethyl)cyclohexanone, ring–CH(CH3)–CH2–NO2 (c) 2-methyl-2-(2-nitroethyl)cyclohexanone (d) 2-(3-nitropropyl)cyclohexanone.

Solution. Answer (from key): (b). Stork enamine reaction: the nucleophilic β-carbon of the enamine adds in Michael fashion to the β-carbon of the nitroalkene (the carbon bearing CH3), generating the nitronate; aqueous acid hydrolyses the iminium to the ketone, giving 2-(1-methyl-2-nitroethyl)cyclohexanone.

Teacher's Note: Stork enamine: enamine carbon adds to the β-carbon of the nitroalkene; hydrolysis restores C=O.

Exam Note: Name Stork enamine Michael addition.

Question 84. Cyclopentanone reacts with PhMgBr to give N, then NH4Cl/H2O to give O, then conc. HCl (cold) to give P, then KOH (4 molar), ethanol, Δ to give Q. Product Q is: (a) 4-phenylcyclopentene (b) 1-phenylcyclopentene (c) 3-phenylcyclopentene (d) 1-phenylcyclopentanol.

Solution. Answer (from key): (b). PhMgBr gives the tertiary alkoxide (N) and the alcohol 1-phenylcyclopentanol (O). Conc. HCl converts it to the tertiary chloride (P), and ethanolic KOH eliminates HCl (E2/E1) to give the conjugated, more stable 1-phenylcyclopentene (Q).

Teacher's Note: Tertiary benzylic alcohol to chloride, then dehydrohalogenation gives the conjugated alkene.

Exam Note: Zaitsev, conjugated with Ph: 1-phenylcyclopentene.

Question 85. Toluene reacts with CrO2Cl2 to give A, which with conc. KOH gives PhCH2OH + B. Product B of the above reaction is: (a) PhCO2H (b) PhCO2– (c) PhCHO (d) PhCH3.

Solution. Answer (from key): (b). Etard reaction converts toluene into benzaldehyde (A). In conc. KOH it undergoes Cannizzaro reaction, giving benzyl alcohol and the benzoate ion PhCOO– (as K salt).

Teacher's Note: Etard reaction gives benzaldehyde; Cannizzaro gives alcohol plus carboxylate salt in base.

Exam Note: Salt, not acid, forms in KOH.

Question 86. D-(+)-Glyceraldehyde (Fischer projection: CHO on top, H on left and OH on right of C-2, CH2OH at the bottom) is treated with (i) KCN, (ii) H+. The product obtained in the reaction is: (a) diastereomer (mixture) (b) racemic (c) meso (d) optically pure enantiomer.

Solution. Answer (from key): (a). CN– attacks the planar CHO from both faces, creating a new stereocentre next to the existing (unchanged) one. The two cyanohydrins formed (erythro and threo types) are diastereomers, formed in unequal amounts.

Teacher's Note: New stereocentre forms next to an existing one, so the products are diastereomers, not enantiomers.

Exam Note: Say diastereomers form in unequal amounts.

Question 87. Cyclopentanone reacts with NH2OH to give A, then H+ to give B, then LiAlH4 (LAH) to give C. Product C is: (a) piperidin-4-ol (b) piperidine (c) 2-hydroxypiperidine (OH next to N, hemiaminal) (d) a piperidine with OH at the 2-position drawn on the other side.

Solution. Answer (from key): (b). Cyclopentanone oxime (A) undergoes Beckmann rearrangement with acid to the six-membered lactam, piperidin-2-one (B). LiAlH4 reduces the amide C=O fully to CH2, giving piperidine (C).

Teacher's Note: Oxime to lactam by Beckmann (ring expansion); LiAlH4 reduces amide to amine.

Exam Note: Name Beckmann rearrangement and LAH reduction.

Question 88. Cyclopentyl–14C≡N (the nitrile carbon is labelled) + CH3MgBr, then H3O+, gives A; A with NaOI gives B + C. Products A and C are: (a) cyclopentyl–CO–CH3 (unlabelled) ; CHI3 (b) cyclopentyl–CO–14CH3 ; CH14I3 (c) cyclopentyl–14CO–CH3 ; CHI3 (d) cyclopentyl–CH2–14CHO ; CHI3.

Solution. Answer (from key): (c). The Grignard reagent adds to the C≡N carbon, and hydrolysis gives the methyl ketone with the label on the carbonyl carbon (cyclopentyl–14CO–CH3) (A). In the iodoform reaction the CH3 from CH3MgBr is lost as CHI3 (unlabelled, C), and the labelled carbon remains in the carboxylate (B).

Teacher's Note: Nitrile carbon becomes the carbonyl carbon; iodoform removes the added methyl, not the labelled carbon.

Exam Note: Track the labelled carbon through both steps.

Question 89. 1-Phenylethanol, PhCH(OH)CH3, reacts with PCC to give A, then NH2–NH–CO–NH2 to give B. Product B is: (a) PhC(CH3)=N–CO–NH–NH2 (b) PhC(CH3)=N–NH–CO–NH2 (c) PhCH=N–N(CH3)–CO–NH2 (d) PhCH=N–CO–NH2.

Solution. Answer (from key): (b). PCC oxidises the secondary alcohol to acetophenone (A). Semicarbazide condenses through its terminal –NH2 of the hydrazine part (the amide-type NH2 is non-nucleophilic), giving the semicarbazone PhC(CH3)=N–NH–CO–NH2.

Teacher's Note: Semicarbazone forms through the hydrazine NH2, whose lone pair is not delocalised into C=O.

Exam Note: Explain why the amide NH2 does not react.

Question 90. Cyclohexanone reacts with 2 EtOH/H+ to give P. Product P is: (a) hemiacetal (b) acetal (ketal) (c) alcohol (d) alkane.

Solution. Answer (from key): (b). Two moles of ethanol with acid convert the ketone into the diethyl acetal (ketal), 1,1-diethoxycyclohexane; the hemiketal is only the unstable intermediate.

Teacher's Note: Two equivalents of alcohol plus H+ give the acetal/ketal via the hemiacetal.

Exam Note: Name the intermediate hemiketal.

Question 91. The oxyallyl cation derived from a 2-methoxyphenyl-substituted system (ring C–C+(–O–)=CH2, i.e. an oxyallyl zwitterion with the 2-methoxyphenyl group at one terminus) rearranges. Product of rearrangement is: (a) methylenecyclopropane-type compound (b) an epoxide (oxirane) (c) the cyclopropanone bearing the 2-methoxyphenyl group (d) a methylenecyclopropane drawn differently.

Solution. Answer (from key): (c). An oxyallyl cation/zwitterion undergoes four-electron electrocyclic ring closure (as in the Favorskii mechanism) to the cyclopropanone, here 2-(2-methoxyphenyl)cyclopropanone.

Teacher's Note: Oxyallyl cation closes to cyclopropanone, the Favorskii intermediate.

Exam Note: Say electrocyclic ring closure to cyclopropanone.

Question 92. R2C=O + HCN ⇌ R2C(OH)CN (Keq). Reactants: PhCHO (Keq = a), butan-2-one (b), acetophenone PhCOCH3 (c), CH3CHO (d). The correct order of decreasing Keq is: (a) a > b > c > d (b) d > a > b > c (c) d > b > a > c (d) d > a > c > b.

Solution. Answer (from key): (b). Aliphatic aldehyde (d) is most reactive and gives the most stable cyanohydrin; benzaldehyde (a) is stabilised by conjugation with the ring, so K is lower than d; ketones follow, with the aliphatic ketone butan-2-one (b) above the conjugated acetophenone (c): d > a > b > c.

Teacher's Note: Aldehyde > ketone; conjugation with phenyl stabilises the C=O and lowers K.

Exam Note: Rank by steric and conjugation effects.

Question 93. Cyclohexanone + glycerol (HOCH2–CH(OH)–CH2OH, as drawn) with H+ gives A; A with dimethyl sulphate (MeO–SO2–OMe)/base gives B. Product B is: (a) 1,4-dioxaspiro compound with a CH3 group (b) 1,4-dioxaspiro[4.5]decane with a CH2OCH3 group (c) the corresponding CH2SO2OMe compound (d) the corresponding CH2SO3Me compound.

Solution. Answer (from key): (b). The ketone forms the five-membered cyclic ketal with two adjacent OH groups of glycerol (A, with a free CH2OH). Base and Me2SO4 methylate the remaining alkoxide (Williamson ether synthesis), giving the CH2OCH3 ether (B).

Teacher's Note: Diol forms the five-membered ketal; the leftover OH is methylated by dimethyl sulphate.

Exam Note: Methyl sulphate is an O-methylating agent here.

Question 94. Ethyl acetoacetate (CH3COCH2COOEt) is treated with ethylene glycol/H+ to give A; A with 2 PhMgBr gives B; and B with H3O+ gives C. End product C is: (a) CH3–CO–C(OH)Ph2-type α-hydroxy ketone (b) CH3–CO–CH2–C(OH)Ph2 (c) CH3–CH(OH)... hydroxy ester drawn with one Ph (d) a secondary alcohol with one Ph and a ketone.

Solution. Answer (from key): (b). Ethylene glycol protects the more reactive ketone as the ketal (A). Two equivalents of PhMgBr convert the ester into the tertiary alcohol –C(OH)Ph2 (B). Aqueous acid removes the ketal, giving 4-hydroxy-4,4-diphenylbutan-2-one, CH3COCH2C(OH)Ph2 (C).

Teacher's Note: Ketone is protected as ketal; ester takes two RMgX to give tertiary alcohol; acid deprotects.

Exam Note: Show the protect, Grignard, deprotect sequence.

Question 95. Compound A (C11H8O) does not undergo self-aldol condensation; on ozonolysis it gives PhCHO + 2b (an oxidation product) with Ag+ giving oxalic acid. Compound A will be: (a) Ph–C≡C–C≡C–CHO (b) Ph–C≡C–CH=CH–CHO (c) Ph–CH=CH–C≡C–CHO (d) Ph–CH=CH–C≡C–CH=CH–CO2H-type structure.

Solution. Answer (from key): (c). A, Ph–CH=CH–C≡C–CHO (C11H8O), has no α-hydrogen, so it cannot undergo self aldol. Ozonolysis cleaves the C=C to give PhCHO and the fragment OHC–C≡C–CHO type products, which on oxidation (Ag+) lead to oxalic acid.

Teacher's Note: No α-hydrogen means no aldol; ozonolysis fragments identify the Ph–CH= end.

Exam Note: Check the formula C11H8O and α-H.

Question 96. Acetone reacts with isopropyl alcohol (propan-2-ol) with TsOH catalyst, 0 °C, 2 h (molecular sieves) to give a product (62 % yield). Product is: (a) 2,2-diethoxy-type ketal (b) a ketal drawn with a CH2 bridge (c) 2,2-diisopropoxypropane (d) an acetal of a different aldehyde.

Solution. Answer (from key): (c). Acid-catalysed reaction of the ketone with two molecules of the alcohol gives the ketal, 2,2-diisopropoxypropane, (CH3)2C[OCH(CH3)2]2; molecular sieves remove the water formed and drive the equilibrium.

Teacher's Note: Ketal formation is an equilibrium; molecular sieves remove water to give high conversion.

Exam Note: Mention water removal drives the reaction.

Question 97. Which pair of reactants may be used to make the given acetal (spiro compound of cyclopentane and 5,5-dimethyl-1,3-dioxane)? (a) 4,4-dimethylcyclohexanone + ethylene glycol (b) cyclopentanone + a branched 1,2-diol with an isopropyl group (as drawn) (c) cyclopentanone + a 2-isopropyl-type 1,3-diol (as drawn, without the gem-dimethyl pattern) (d) cyclopentanone + 2,2-dimethylpropane-1,3-diol.

Solution. Answer (from key): (d). The six-membered ring O–CH2–C(CH3)2–CH2–O comes from the 1,3-diol 2,2-dimethylpropane-1,3-diol (neopentyl glycol), and the spiro cyclopentane carbon comes from cyclopentanone.

Teacher's Note: Break the two C–O bonds at the spiro carbon: ketone plus the 1,3-diol.

Exam Note: Work back from acetal to carbonyl plus diol.

Question 98. The compound A, CH3–C(OCH2CH2O)–CH2–CHO (ketone protected as 1,3-dioxolane, aldehyde free), on treatment with H+ gives B; A and B are isomers. Isomer B is: (a) an aldol-type hydroxy compound with C=CH2 (b) CH3–CO–CH2–CH(OCH2CH2O), the isomer in which the aldehyde is protected as the 1,3-dioxolane and the ketone is free (c) a hydroxy aldehyde bearing a dioxolane (d) an enol-type CH2= compound with OH.

Solution. Answer (from key): (b). Under acid catalysis the glycol unit migrates (intramolecular transacetalisation): the aldehyde, being more reactive towards acetal formation, ends up protected as the 1,3-dioxolane while the ketone is freed. A and B are constitutional isomers.

Teacher's Note: Aldehydes form acetals more readily than ketones, so the protecting group moves to the aldehyde.

Exam Note: Explain via relative acetal stability.

Question 99. 2-Propanol with PCC gives A; 1-propanol with PCC gives B. A and B are differentiated by: (a) NaH (b) 2,4-DNP (c) Tollens' reagent (d) NaHSO3.

Solution. Answer (from key): (c). A = acetone, B = propanal. Both react with 2,4-DNP and NaHSO3; neither has an acidic O–H for NaH. Only the aldehyde (B) reduces Tollens' reagent to give a silver mirror.

Teacher's Note: Both products are carbonyls; only an aldehyde reduces Tollens' reagent.

Exam Note: Tollens or Fehling separates aldehyde from ketone.

Question 100. Which of the following pairs cannot be differentiated by Tollens' reagent? (a) benzaldehyde and benzyl alcohol (b) hexanal and 2-hexanone (c) 2-hexanol and 2-hexane (hexane/hexene-type hydrocarbon) (d) pentanal and diethyl ether.

Solution. Answer (from key): (c). Neither 2-hexanol nor the hydrocarbon reduces Tollens' reagent, so the pair cannot be separated by it. In (a), (b) and (d) one member is an aldehyde (silver mirror) and the other is not.

Teacher's Note: Tollens' gives silver mirror only with aldehydes; a pair with no aldehyde cannot be separated.

Exam Note: Check whether either member is an aldehyde.

Question 101. An optically active compound C6H12O gives a positive test with 2,4-dinitrophenylhydrazine but negative with Tollens' reagent. Structure of the compound: (a) CH3CO(CH2)3CH3 (b) OHC–CH(CH3)–CH2CH2CH3 (c) CH3CO–CH(CH3)–CH2CH3 (d) CH3CH2CO–CH(CH3)2.

Solution. Answer (from key): (c). A positive 2,4-DNP and negative Tollens test means a ketone. Only 3-methylpentan-2-one has a stereocentre (CH carrying H, CH3, C2H5, COCH3), so it is optically active. (b) is an aldehyde; (a) and (d) have no chiral carbon.

Teacher's Note: Ketone plus a carbon with four different groups gives an optically active ketone.

Exam Note: Test chirality of each ketone option.

Question 102. Compound A (C6H12O3), when treated with I2 in aqueous NaOH, gives a yellow precipitate. With Tollens' reagent no reaction occurs; when A is hydrolysed and then treated with Tollens' reagent, a silver mirror is formed. Compound A is: (a) CH3CO–CH2CH2–CH(OH)(OCH3) (b) CH3CO–C(OCH3)2–CH3 (c) CH3CO–CH2–CH(OCH3)2 (d) OHC–CH2CH2–CH(OCH3)2.

Solution. Answer (from key): (c). CH3CO– gives the iodoform test (yellow CHI3); the acetal hides the aldehyde so Tollens' is negative; after hydrolysis CH3COCH2CHO is formed, which gives silver mirror. Formula C6H12O3 matches. (d) already has a free CHO and fails the first Tollens test.

Teacher's Note: Free CHO would give Tollens at once; the acetal masks it until hydrolysis.

Exam Note: Same logic as Question 30.

Question 103. HOOC–CH2CH2–CH2CH2–COOH (adipic acid) is heated with BaCO3 to give A; A with NH2NH2 gives B; B with KOH, heat gives C. Product C is: (a) CH3CH=CHCH3 (b) cyclopentanone (c) cyclopentane (d) cyclopentanone hydrazone.

Solution. Answer (from key): (c). Barium adipate pyrolyses to cyclopentanone (A); hydrazine gives the hydrazone (B); KOH and heat (Wolff–Kishner) convert C=N–NH2 into CH2 with loss of N2, giving cyclopentane (C).

Teacher's Note: Dicarboxylic acid salt gives cyclic ketone; Wolff–Kishner then removes C=O completely.

Exam Note: Three steps: ketonic decarboxylation, hydrazone, Wolff–Kishner.

Step-by-Step MS Chauhan Solutions for JEE Math

Chapter-wise MS Chauhan Solutions: MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 7 Aldehydes And Ketones Part 1

Explore reliable mathematical solutions for MS Chauhan Solutions Advanced Problems in Organic Chemistry Chapter 7 Aldehydes And Ketones Part 1 tailored for JEE learners. Utilizing these complete exercise answers ensures your preparation aligns exactly with standard academic requirements.

Detailed Calculation Guides for JEE

Clear, methodical explanations accompany every challenging problem within the text. Engaging with these detailed mathematical breakdowns lays a solid foundation for advanced learning and improves execution speed for upcoming exams.

Additional Study Materials for 2026

Wrap up your chapter revision by testing your knowledge against standard objective question formats. Explore our full library of up-to-date syllabus details and mock evaluations to secure top grades in your math examinations.

FAQs

What are these MS Chauhan Solutions for JEE Chemistry?

They are chapter-wise solved questions from the MS Chauhan book for JEE Chemistry. Each answer is explained step by step so you can check your work and revise.

Are the MS Chauhan JEE Chemistry Solutions free to read?

Yes. All chapters can be read online for free on a phone, tablet or computer, and no sign-up is needed.

How should I use these MS Chauhan solutions for JEE Chemistry?

Try each question on your own first, then read the solution. Use it to check your steps, correct mistakes and learn how a full answer is written.

Will practising MS Chauhan JEE Chemistry questions help in exams?

Regular practice improves accuracy and speed and shows which topics need more revision. It works best alongside your textbook and class notes.

Are these solutions arranged chapter by chapter?

Yes. The chapter list on this page links to every chapter’s solved questions, so you can open the topic you are studying.

Which session are these JEE Chemistry Solutions for?

They are listed for the 2026-27 session. Check that the questions match the textbook edition you use.